diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 0000000000000000000000000000000000000000..14bafc38f2dcc05e51443db5f90f7d1e0d356f4b
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x) ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x) ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x) ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x) ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ /* enable parent clock first */
+ if (clk->parent)
+ __clk_enable(clk->parent);
+
+ if (clk->use_cnt++ == 0) {
+ if (clk_is_pll1(clk)) { /* PLL1 */
+ chipcHw_pll1Enable(clk->rate_hz, 0);
+ } else if (clk_is_pll2(clk)) { /* PLL2 */
+ chipcHw_pll2Enable(clk->rate_hz);
+ } else if (clk_is_using_xtal(clk)) { /* source is crystal */
+ if (!clk_is_primary(clk))
+ chipcHw_bypassClockEnable(clk->csp_id);
+ } else { /* source is PLL */
+ chipcHw_setClockEnable(clk->csp_id);
+ }
+ }
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ BUG_ON(clk->use_cnt == 0);
+
+ if (--clk->use_cnt == 0) {
+ if (clk_is_pll1(clk)) { /* PLL1 */
+ chipcHw_pll1Disable();
+ } else if (clk_is_pll2(clk)) { /* PLL2 */
+ chipcHw_pll2Disable();
+ } else if (clk_is_using_xtal(clk)) { /* source is crystal */
+ if (!clk_is_primary(clk))
+ chipcHw_bypassClockDisable(clk->csp_id);
+ } else { /* source is PLL */
+ chipcHw_setClockDisable(clk->csp_id);
+ }
+ }
+
+ if (clk->parent)
+ __clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (!clk)
+ return 0;
+
+ return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned long actual;
+ unsigned long rate_hz;
+
+ if (!clk)
+ return -EINVAL;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+
+ if (clk->use_cnt)
+ return -EBUSY;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ actual = clk->parent->rate_hz;
+ rate_hz = min(actual, rate);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned long actual;
+ unsigned long rate_hz;
+
+ if (!clk)
+ return -EINVAL;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+
+ if (clk->use_cnt)
+ return -EBUSY;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ actual = clk->parent->rate_hz;
+ rate_hz = min(actual, rate);
+ rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+ clk->rate_hz = rate_hz;
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (!clk)
+ return NULL;
+
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ struct clk *old_parent;
+
+ if (!clk || !parent)
+ return -EINVAL;
+
+ if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+ return -EINVAL;
+
+ /* if more than one user, parent is not allowed */
+ if (clk->use_cnt > 1)
+ return -EBUSY;
+
+ if (clk->parent == parent)
+ return 0;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ old_parent = clk->parent;
+ clk->parent = parent;
+ if (clk_is_using_xtal(parent))
+ clk->mode |= CLK_MODE_XTAL;
+ else
+ clk->mode &= (~CLK_MODE_XTAL);
+
+ /* if clock is active */
+ if (clk->use_cnt != 0) {
+ clk->use_cnt--;
+ /* enable clock with the new parent */
+ __clk_enable(clk);
+ /* disable the old parent */
+ __clk_disable(old_parent);
+ }
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 0000000000000000000000000000000000000000..5e0b9813897366ba42fe17401457d920b00b2a2e
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY 1 /* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1 2 /* PPL1 */
+#define CLK_TYPE_PLL2 4 /* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE 8 /* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE 16 /* parent can be changed */
+
+#define CLK_MODE_XTAL 1 /* clock source is from crystal */
+
+struct clk {
+ const char *name; /* clock name */
+ unsigned int type; /* clock type */
+ unsigned int mode; /* current mode */
+ volatile int use_bypass; /* indicate if it's in bypass mode */
+ chipcHw_CLOCK_e csp_id; /* clock ID for CSP CHIPC */
+ unsigned long rate_hz; /* clock rate in Hz */
+ unsigned int use_cnt; /* usage count */
+ struct clk *parent; /* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 0000000000000000000000000000000000000000..492c649f451ec357089b0dce22408d66788e0f8e
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ * derived from linux/arch/arm/mach-versatile/core.c
+ * linux/arch/arm/mach-bcmring/core.c
+ *
+ * Copyright (C) 1999 - 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size) \
+static struct amba_device name##_device = { \
+ .dev = { \
+ .coherent_dma_mask = ~0, \
+ .init_name = initname, \
+ .platform_data = plat \
+ }, \
+ .res = { \
+ .start = MM_ADDR_IO_##base, \
+ .end = MM_ADDR_IO_##base + (size) - 1, \
+ .flags = IORESOURCE_MEM \
+ }, \
+ .dma_mask = ~0, \
+ .irq = { \
+ IRQ_##base \
+ } \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+ .name = "PLL1",
+ .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+ .rate_hz = 2000000000,
+ .use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+ .name = "UART",
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .csp_id = chipcHw_CLOCK_UART,
+ .rate_hz = HW_CFG_UART_CLK_HZ,
+ .parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+ { /* UART0 */
+ .dev_id = "uarta",
+ .clk = &uart_clk,
+ }, { /* UART1 */
+ .dev_id = "uartb",
+ .clk = &uart_clk,
+ }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &uartA_device,
+ &uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+ int i;
+ u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+ secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+ secHw_BLK_MASK_KEY_SCAN |
+ secHw_BLK_MASK_TOUCH_SCREEN |
+ secHw_BLK_MASK_UART0 |
+ secHw_BLK_MASK_UART1 |
+ secHw_BLK_MASK_WATCHDOG |
+ secHw_BLK_MASK_SPUM |
+ secHw_BLK_MASK_DDR2 |
+ secHw_BLK_MASK_SPU |
+ secHw_BLK_MASK_PKA |
+ secHw_BLK_MASK_RNG |
+ secHw_BLK_MASK_RTC |
+ secHw_BLK_MASK_OTP |
+ secHw_BLK_MASK_BOOT |
+ secHw_BLK_MASK_MPU |
+ secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+ /* Only the devices attached to the AMBA bus are enabled just before the bus is */
+ /* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+ /* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+ /* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+ bus_clock = chipcHw_REG_BUS_CLOCK_GE
+ | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+ chipcHw_busInterfaceClockEnable(bus_clock);
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE MM_IO_BASE_TMR
+#define TIMER1_VA_BASE (MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE (MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ
+
+/*
+ * These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1 1000
+#define mSEC_5 (mSEC_1 * 5)
+#define mSEC_10 (mSEC_1 * 10)
+#define mSEC_25 (mSEC_1 * 25)
+#define SEC_1 (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
+#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
+#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
+#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD (TIMER_INTERVAL)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
+#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+ ctrl = TIMER_CTRL_PERIODIC;
+ ctrl |=
+ TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+ TIMER_CTRL_ENABLE;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TIMER_CTRL_ONESHOT;
+ ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
+
+ writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+ writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+ writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+ return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+ .name = "timer0",
+ .shift = 32,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = timer_set_mode,
+ .set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &timer0_clockevent;
+
+ writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+ .name = "bcmring Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+ return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+ return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+ .name = "timer1",
+ .rating = 200,
+ .read = bcmring_get_cycles_timer1,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+ .name = "timer3",
+ .rating = 100,
+ .read = bcmring_get_cycles_timer3,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+ /* setup timer1 as free-running clocksource */
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER1_VA_BASE + TIMER_CTRL);
+
+ clocksource_bcmring_timer1.mult =
+ clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+ clocksource_bcmring_timer1.shift);
+ clocksource_register(&clocksource_bcmring_timer1);
+
+ /* setup timer3 as free-running clocksource */
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER3_VA_BASE + TIMER_CTRL);
+
+ clocksource_bcmring_timer3.mult =
+ clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+ clocksource_bcmring_timer3.shift);
+ clocksource_register(&clocksource_bcmring_timer3);
+
+ return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+ printk(KERN_INFO "bcmring_init_timer\n");
+ /*
+ * Initialise to a known state (all timers off)
+ */
+ writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+ /*
+ * Make irqs happen for the system timer
+ */
+ setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+ bcmring_clocksource_init();
+
+ timer0_clockevent.mult =
+ div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+ timer0_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+ timer0_clockevent.min_delta_ns =
+ clockevent_delta2ns(0xf, &timer0_clockevent);
+
+ timer0_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+ .init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 0000000000000000000000000000000000000000..04b37a89801cfdc3af7c96f3307930e1cb15f98d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif