diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index f5561ac7e17ed358ce7e6a00c7c0f8913f3464c6..936ab5b87324ce7cf022320a777342d2507dfd19 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -42,9 +42,6 @@ Optional properties:
- auto-flow-control: one way to enable automatic flow control support. The
driver is allowed to detect support for the capability even without this
property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
- line respectively. It will use specified GPIO instead of the peripheral
- function pin for the UART feature. If unsure, don't specify this property.
Note:
* fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
interrupts = <10>;
reg-shift = <2>;
};
-
-Example for OMAP UART using GPIO-based modem control signals:
-
- uart4: serial@49042000 {
- compatible = "ti,omap3-uart";
- reg = <0x49042000 0x400>;
- interrupts = <80>;
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
- rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
- dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 122e0e4029fee9e42f4b1ba37f0439728f0d54a4..1a16feac9a36070715bbe26974661b823e3c08ab 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -15,8 +15,6 @@
#include <linux/serial_reg.h>
#include <linux/dmaengine.h>
-#include "../serial_mctrl_gpio.h"
-
struct uart_8250_dma {
int (*tx_dma)(struct uart_8250_port *p);
int (*rx_dma)(struct uart_8250_port *p);
@@ -133,43 +131,12 @@ void serial8250_em485_destroy(struct uart_8250_port *p);
static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
{
- int mctrl_gpio = 0;
-
serial_out(up, UART_MCR, value);
-
- if (value & UART_MCR_RTS)
- mctrl_gpio |= TIOCM_RTS;
- if (value & UART_MCR_DTR)
- mctrl_gpio |= TIOCM_DTR;
-
- mctrl_gpio_set(up->gpios, mctrl_gpio);
}
static inline int serial8250_in_MCR(struct uart_8250_port *up)
{
- int mctrl, mctrl_gpio = 0;
-
- mctrl = serial_in(up, UART_MCR);
-
- /* save current MCR values */
- if (mctrl & UART_MCR_RTS)
- mctrl_gpio |= TIOCM_RTS;
- if (mctrl & UART_MCR_DTR)
- mctrl_gpio |= TIOCM_DTR;
-
- mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
-
- if (mctrl_gpio & TIOCM_RTS)
- mctrl |= UART_MCR_RTS;
- else
- mctrl &= ~UART_MCR_RTS;
-
- if (mctrl_gpio & TIOCM_DTR)
- mctrl |= UART_MCR_DTR;
- else
- mctrl &= ~UART_MCR_DTR;
-
- return mctrl;
+ return serial_in(up, UART_MCR);
}
#if defined(__alpha__) && !defined(CONFIG_PCI)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 13ad5c3d2e681893aeaa0d675d17c9f04f06b967..dcf43f66404f12d2bd290a30adfe494dd056162e 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -974,8 +974,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart = serial8250_find_match_or_unused(&up->port);
if (uart && uart->port.type != PORT_8250_CIR) {
- struct mctrl_gpios *gpios;
-
if (uart->port.dev)
uart_remove_one_port(&serial8250_reg, &uart->port);
@@ -1013,13 +1011,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->port.flags & UPF_FIXED_TYPE)
uart->port.type = up->port.type;
- gpios = mctrl_gpio_init(&uart->port, 0);
- if (IS_ERR(gpios)) {
- if (PTR_ERR(gpios) != -ENOSYS)
- return PTR_ERR(gpios);
- } else
- uart->gpios = gpios;
-
serial8250_set_defaults(uart);
/* Possibly override default I/O functions. */
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 737b4b3957b0bc2470cde5574eed1e5f7230c90a..0facc789fe7d4133e1c5e32d0a471db53bb3baa5 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -31,7 +31,7 @@
#define IO_ADDR2 0x60
#define LDN 0x7
-#define IRQ_MODE 0x70
+#define FINTEK_IRQ_MODE 0x70
#define IRQ_SHARE BIT(4)
#define IRQ_MODE_MASK (BIT(6) | BIT(5))
#define IRQ_LEVEL_LOW 0
@@ -195,7 +195,7 @@ static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode)
outb(LDN, pdata->base_port + ADDR_PORT);
outb(pdata->index, pdata->base_port + DATA_PORT);
- outb(IRQ_MODE, pdata->base_port + ADDR_PORT);
+ outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT);
tmp = inb(pdata->base_port + DATA_PORT);
tmp &= ~IRQ_MODE_MASK;
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index 339de9cd086612c60d17ef3c581b59df34a0022a..20c5db2f426406a50fc41ef90f2e268deac18f72 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -168,6 +168,9 @@ static void mid8250_set_termios(struct uart_port *p,
unsigned long w = BIT(24) - 1;
unsigned long mul, div;
+ /* Gracefully handle the B0 case: fall back to B9600 */
+ fuart = fuart ? fuart : 9600 * 16;
+
if (mid->board->freq < fuart) {
/* Find prescaler value that satisfies Fuart < Fref */
if (mid->board->freq > baud)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index e14982f36a04dff107b11f1f5e75b2b7a587390a..61ad6c3b20a02b82e6aa95b46fc6d467edc86334 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -134,21 +134,18 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
serial8250_do_set_mctrl(port, mctrl);
- if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios,
- UART_GPIO_RTS))) {
- /*
- * Turn off autoRTS if RTS is lowered and restore autoRTS
- * setting if RTS is raised
- */
- lcr = serial_in(up, UART_LCR);
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
- priv->efr |= UART_EFR_RTS;
- else
- priv->efr &= ~UART_EFR_RTS;
- serial_out(up, UART_EFR, priv->efr);
- serial_out(up, UART_LCR, lcr);
- }
+ /*
+ * Turn off autoRTS if RTS is lowered and restore autoRTS setting
+ * if RTS is raised
+ */
+ lcr = serial_in(up, UART_LCR);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+ priv->efr |= UART_EFR_RTS;
+ else
+ priv->efr &= ~UART_EFR_RTS;
+ serial_out(up, UART_EFR, priv->efr);
+ serial_out(up, UART_LCR, lcr);
}
/*
@@ -449,9 +446,7 @@ static void omap_8250_set_termios(struct uart_port *port,
priv->efr = 0;
up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
- if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW
- && IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios,
- UART_GPIO_RTS))) {
+ if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
/* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
priv->efr |= UART_EFR_CTS;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 20ebaea5c414d6d70f371aa9d367cd40327fa909..bc51b32b2774e961627d7778c43d8ddf591249b4 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1950,6 +1950,43 @@ pci_wch_ch38x_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954
#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958
+#define PCI_VENDOR_ID_ACCESIO 0x494f
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB 0x105C
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S 0x105E
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB 0x1091
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2 0x1093
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB 0x1099
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4 0x109B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB 0x10D1
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM 0x10D3
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB 0x10DA
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM 0x10DC
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1 0x1108
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2 0x1110
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2 0x1111
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4 0x1118
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4 0x1119
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S 0x1152
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S 0x115A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2 0x1190
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2 0x1191
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 0x1198
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4 0x1199
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM 0x11D0
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4 0x105A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4 0x105B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8 0x106A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8 0x106B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4 0x1098
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8 0x10A9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM 0x10D9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8
+
+
+
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
@@ -5112,6 +5149,108 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_pericom_PI7C9X7958 },
+ /*
+ * ACCES I/O Products quad
+ */
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
+ { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pericom_PI7C9X7958 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 7481b95c6d846770b10f77a64e8231c7b2ad4e8e..bdfa659b9606a93360fd6e978a6b9c89d9a3e251 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1618,8 +1618,6 @@ static void serial8250_disable_ms(struct uart_port *port)
if (up->bugs & UART_BUG_NOMSR)
return;
- mctrl_gpio_disable_ms(up->gpios);
-
up->ier &= ~UART_IER_MSI;
serial_port_out(port, UART_IER, up->ier);
}
@@ -1632,8 +1630,6 @@ static void serial8250_enable_ms(struct uart_port *port)
if (up->bugs & UART_BUG_NOMSR)
return;
- mctrl_gpio_enable_ms(up->gpios);
-
up->ier |= UART_IER_MSI;
serial8250_rpm_get(up);
@@ -1917,8 +1913,7 @@ unsigned int serial8250_do_get_mctrl(struct uart_port *port)
ret |= TIOCM_DSR;
if (status & UART_MSR_CTS)
ret |= TIOCM_CTS;
-
- return mctrl_gpio_get(up->gpios, &ret);
+ return ret;
}
EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index c9ec839a5ddf447a6b7b3fe3158ad4104e3024c2..7c6f7afca5ddeed7b25fa6272246fc539bf31b04 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -6,7 +6,6 @@
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
select SERIAL_CORE
- select SERIAL_MCTRL_GPIO if GPIOLIB
---help---
This selects whether you want to include the driver for the standard
serial ports. The standard answer is Y. People who might say N
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 923266cd294a33c8d98cbe274df0991f6647dafa..48ec7651989b093fc015e44b59657c7000e11012 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -111,7 +111,6 @@ struct uart_8250_port {
* if no_console_suspend
*/
unsigned char probe;
- struct mctrl_gpios *gpios;
#define UART_PROBE_RSA (1 << 0)
/*