From 574e69953d73f86dcaca34ffc8098e82a62e3746 Mon Sep 17 00:00:00 2001
From: Ricardo Silva <rjpdasilva@gmail.com>
Date: Wed, 11 Apr 2018 22:42:57 +0100
Subject: [PATCH] dt-bindings: pinctrl: mcp23s08: Clarify gpiospec flags cell
usage
The pinctrl-mcp23s08 driver doesn't provide a specific gpiospec
of_xlate() function, causing the gpiolib-of's of_gpio_simple_xlate()
function to be used instead, which takes the gpiospec's second cell as
the flags specifier according to 'include/dt-bindings/gpio/gpio.h'.
The pinctrl-mcp23s08 bindings document was mentioning that the flags
were unused, which is not accurate because values in that second cell
are indeed used by the gpiolib-of's of_gpio_simple_xlate() for
configuring the gpio (e.g. its polarity).
This way, replace the "flags currently unused" reference in the
dt-bindings document with references to the appropriate files specifying
the possible flag values and gpiospec description.
CC: devicetree@vger.kernel.org
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
.../devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index a5a8322a31bda..a677145ae6d1f 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -18,7 +18,9 @@ Required properties:
removed.
- #gpio-cells : Should be two.
- first cell is the pin number
- - second cell is used to specify flags. Flags are currently unused.
+ - second cell is used to specify flags as described in
+ 'Documentation/devicetree/bindings/gpio/gpio.txt'. Allowed values defined by
+ 'include/dt-bindings/gpio/gpio.h' (e.g. GPIO_ACTIVE_LOW).
- gpio-controller : Marks the device node as a GPIO controller.
- reg : For an address on its bus. I2C uses this a the I2C address of the chip.
SPI uses this to specify the chipselect line which the chip is
--
GitLab