From f5e70d0fe3ea990cfb3fc8d7f76a719adcb1e0b5 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@tylersburg.infradead.org>
Date: Mon, 13 Jul 2009 11:35:12 +0100
Subject: [PATCH 001/863] md: Factor out RAID6 algorithms into lib/
We'll want to use these in btrfs too.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/md/Kconfig | 7 +-
drivers/md/Makefile | 76 -------------------
lib/Kconfig | 3 +
lib/Makefile | 1 +
lib/raid6/Makefile | 78 ++++++++++++++++++++
{drivers/md => lib/raid6}/mktables.c | 0
{drivers/md => lib/raid6}/raid6algos.c | 0
{drivers/md => lib/raid6}/raid6altivec.uc | 0
{drivers/md => lib/raid6}/raid6int.uc | 0
{drivers/md => lib/raid6}/raid6mmx.c | 0
{drivers/md => lib/raid6}/raid6recov.c | 0
{drivers/md => lib/raid6}/raid6sse1.c | 0
{drivers/md => lib/raid6}/raid6sse2.c | 0
{drivers/md => lib/raid6}/raid6test/Makefile | 0
{drivers/md => lib/raid6}/raid6test/test.c | 0
{drivers/md => lib/raid6}/raid6x86.h | 0
{drivers/md => lib/raid6}/unroll.pl | 0
17 files changed, 84 insertions(+), 81 deletions(-)
create mode 100644 lib/raid6/Makefile
rename {drivers/md => lib/raid6}/mktables.c (100%)
rename {drivers/md => lib/raid6}/raid6algos.c (100%)
rename {drivers/md => lib/raid6}/raid6altivec.uc (100%)
rename {drivers/md => lib/raid6}/raid6int.uc (100%)
rename {drivers/md => lib/raid6}/raid6mmx.c (100%)
rename {drivers/md => lib/raid6}/raid6recov.c (100%)
rename {drivers/md => lib/raid6}/raid6sse1.c (100%)
rename {drivers/md => lib/raid6}/raid6sse2.c (100%)
rename {drivers/md => lib/raid6}/raid6test/Makefile (100%)
rename {drivers/md => lib/raid6}/raid6test/test.c (100%)
rename {drivers/md => lib/raid6}/raid6x86.h (100%)
rename {drivers/md => lib/raid6}/unroll.pl (100%)
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 2158377a13593..891f7c8490d38 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -121,7 +121,7 @@ config MD_RAID10
config MD_RAID456
tristate "RAID-4/RAID-5/RAID-6 mode"
depends on BLK_DEV_MD
- select MD_RAID6_PQ
+ select RAID6_PQ
select ASYNC_MEMCPY
select ASYNC_XOR
select ASYNC_PQ
@@ -165,12 +165,9 @@ config MULTICORE_RAID456
If unsure, say N.
-config MD_RAID6_PQ
- tristate
-
config ASYNC_RAID6_TEST
tristate "Self test for hardware accelerated raid6 recovery"
- depends on MD_RAID6_PQ
+ depends on RAID6_PQ
select ASYNC_RAID6_RECOV
---help---
This is a one-shot self test that permutes through the
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 1dc4185bd781f..c9b3a7843d832 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -12,13 +12,6 @@ dm-log-userspace-y \
+= dm-log-userspace-base.o dm-log-userspace-transfer.o
md-mod-y += md.o bitmap.o
raid456-y += raid5.o
-raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \
- raid6int1.o raid6int2.o raid6int4.o \
- raid6int8.o raid6int16.o raid6int32.o \
- raid6altivec1.o raid6altivec2.o raid6altivec4.o \
- raid6altivec8.o \
- raid6mmx.o raid6sse1.o raid6sse2.o
-hostprogs-y += mktables
# Note: link order is important. All raid personalities
# and must come before md.o, as they each initialise
@@ -29,7 +22,6 @@ obj-$(CONFIG_MD_LINEAR) += linear.o
obj-$(CONFIG_MD_RAID0) += raid0.o
obj-$(CONFIG_MD_RAID1) += raid1.o
obj-$(CONFIG_MD_RAID10) += raid10.o
-obj-$(CONFIG_MD_RAID6_PQ) += raid6_pq.o
obj-$(CONFIG_MD_RAID456) += raid456.o
obj-$(CONFIG_MD_MULTIPATH) += multipath.o
obj-$(CONFIG_MD_FAULTY) += faulty.o
@@ -45,75 +37,7 @@ obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o
obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o
obj-$(CONFIG_DM_ZERO) += dm-zero.o
-quiet_cmd_unroll = UNROLL $@
- cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \
- < $< > $@ || ( rm -f $@ && exit 1 )
-
-ifeq ($(CONFIG_ALTIVEC),y)
-altivec_flags := -maltivec -mabi=altivec
-endif
-
ifeq ($(CONFIG_DM_UEVENT),y)
dm-mod-objs += dm-uevent.o
endif
-targets += raid6int1.c
-$(obj)/raid6int1.c: UNROLL := 1
-$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-targets += raid6int2.c
-$(obj)/raid6int2.c: UNROLL := 2
-$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-targets += raid6int4.c
-$(obj)/raid6int4.c: UNROLL := 4
-$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-targets += raid6int8.c
-$(obj)/raid6int8.c: UNROLL := 8
-$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-targets += raid6int16.c
-$(obj)/raid6int16.c: UNROLL := 16
-$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-targets += raid6int32.c
-$(obj)/raid6int32.c: UNROLL := 32
-$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-CFLAGS_raid6altivec1.o += $(altivec_flags)
-targets += raid6altivec1.c
-$(obj)/raid6altivec1.c: UNROLL := 1
-$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-CFLAGS_raid6altivec2.o += $(altivec_flags)
-targets += raid6altivec2.c
-$(obj)/raid6altivec2.c: UNROLL := 2
-$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-CFLAGS_raid6altivec4.o += $(altivec_flags)
-targets += raid6altivec4.c
-$(obj)/raid6altivec4.c: UNROLL := 4
-$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-CFLAGS_raid6altivec8.o += $(altivec_flags)
-targets += raid6altivec8.c
-$(obj)/raid6altivec8.c: UNROLL := 8
-$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
- $(call if_changed,unroll)
-
-quiet_cmd_mktable = TABLE $@
- cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
-
-targets += raid6tables.c
-$(obj)/raid6tables.c: $(obj)/mktables FORCE
- $(call if_changed,mktable)
diff --git a/lib/Kconfig b/lib/Kconfig
index bb1326d3839c9..1cc756c4c78c4 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -7,6 +7,9 @@ config BINARY_PRINTF
menu "Library routines"
+config RAID6_PQ
+ tristate
+
config BITREVERSE
tristate
diff --git a/lib/Makefile b/lib/Makefile
index 2e78277eff9da..b25faf0d1d5c2 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_LZO_COMPRESS) += lzo/
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
+obj-$(CONFIG_RAID6_PQ) += raid6/
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
new file mode 100644
index 0000000000000..b2fe4baa90e0b
--- /dev/null
+++ b/lib/raid6/Makefile
@@ -0,0 +1,78 @@
+obj-$(CONFIG_RAID6_PQ) += raid6_pq.o
+
+raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \
+ raid6int1.o raid6int2.o raid6int4.o \
+ raid6int8.o raid6int16.o raid6int32.o \
+ raid6altivec1.o raid6altivec2.o raid6altivec4.o \
+ raid6altivec8.o \
+ raid6mmx.o raid6sse1.o raid6sse2.o
+hostprogs-y += mktables
+
+quiet_cmd_unroll = UNROLL $@
+ cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \
+ < $< > $@ || ( rm -f $@ && exit 1 )
+
+ifeq ($(CONFIG_ALTIVEC),y)
+altivec_flags := -maltivec -mabi=altivec
+endif
+
+targets += raid6int1.c
+$(obj)/raid6int1.c: UNROLL := 1
+$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+targets += raid6int2.c
+$(obj)/raid6int2.c: UNROLL := 2
+$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+targets += raid6int4.c
+$(obj)/raid6int4.c: UNROLL := 4
+$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+targets += raid6int8.c
+$(obj)/raid6int8.c: UNROLL := 8
+$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+targets += raid6int16.c
+$(obj)/raid6int16.c: UNROLL := 16
+$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+targets += raid6int32.c
+$(obj)/raid6int32.c: UNROLL := 32
+$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_raid6altivec1.o += $(altivec_flags)
+targets += raid6altivec1.c
+$(obj)/raid6altivec1.c: UNROLL := 1
+$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_raid6altivec2.o += $(altivec_flags)
+targets += raid6altivec2.c
+$(obj)/raid6altivec2.c: UNROLL := 2
+$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_raid6altivec4.o += $(altivec_flags)
+targets += raid6altivec4.c
+$(obj)/raid6altivec4.c: UNROLL := 4
+$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_raid6altivec8.o += $(altivec_flags)
+targets += raid6altivec8.c
+$(obj)/raid6altivec8.c: UNROLL := 8
+$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+ $(call if_changed,unroll)
+
+quiet_cmd_mktable = TABLE $@
+ cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
+
+targets += raid6tables.c
+$(obj)/raid6tables.c: $(obj)/mktables FORCE
+ $(call if_changed,mktable)
diff --git a/drivers/md/mktables.c b/lib/raid6/mktables.c
similarity index 100%
rename from drivers/md/mktables.c
rename to lib/raid6/mktables.c
diff --git a/drivers/md/raid6algos.c b/lib/raid6/raid6algos.c
similarity index 100%
rename from drivers/md/raid6algos.c
rename to lib/raid6/raid6algos.c
diff --git a/drivers/md/raid6altivec.uc b/lib/raid6/raid6altivec.uc
similarity index 100%
rename from drivers/md/raid6altivec.uc
rename to lib/raid6/raid6altivec.uc
diff --git a/drivers/md/raid6int.uc b/lib/raid6/raid6int.uc
similarity index 100%
rename from drivers/md/raid6int.uc
rename to lib/raid6/raid6int.uc
diff --git a/drivers/md/raid6mmx.c b/lib/raid6/raid6mmx.c
similarity index 100%
rename from drivers/md/raid6mmx.c
rename to lib/raid6/raid6mmx.c
diff --git a/drivers/md/raid6recov.c b/lib/raid6/raid6recov.c
similarity index 100%
rename from drivers/md/raid6recov.c
rename to lib/raid6/raid6recov.c
diff --git a/drivers/md/raid6sse1.c b/lib/raid6/raid6sse1.c
similarity index 100%
rename from drivers/md/raid6sse1.c
rename to lib/raid6/raid6sse1.c
diff --git a/drivers/md/raid6sse2.c b/lib/raid6/raid6sse2.c
similarity index 100%
rename from drivers/md/raid6sse2.c
rename to lib/raid6/raid6sse2.c
diff --git a/drivers/md/raid6test/Makefile b/lib/raid6/raid6test/Makefile
similarity index 100%
rename from drivers/md/raid6test/Makefile
rename to lib/raid6/raid6test/Makefile
diff --git a/drivers/md/raid6test/test.c b/lib/raid6/raid6test/test.c
similarity index 100%
rename from drivers/md/raid6test/test.c
rename to lib/raid6/raid6test/test.c
diff --git a/drivers/md/raid6x86.h b/lib/raid6/raid6x86.h
similarity index 100%
rename from drivers/md/raid6x86.h
rename to lib/raid6/raid6x86.h
diff --git a/drivers/md/unroll.pl b/lib/raid6/unroll.pl
similarity index 100%
rename from drivers/md/unroll.pl
rename to lib/raid6/unroll.pl
--
GitLab
From e5d84970a554d5c0072043a7b9f0f5b88b5fdfe1 Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Thu, 29 Oct 2009 16:41:49 +0000
Subject: [PATCH 002/863] async_tx: Move ASYNC_RAID6_TEST option to
crypto/async_tx/, fix dependencies
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
crypto/async_tx/Kconfig | 14 ++++++++++++++
drivers/md/Kconfig | 13 -------------
2 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/crypto/async_tx/Kconfig b/crypto/async_tx/Kconfig
index e5aeb2b79e6f9..e24aa80087ad6 100644
--- a/crypto/async_tx/Kconfig
+++ b/crypto/async_tx/Kconfig
@@ -22,4 +22,18 @@ config ASYNC_RAID6_RECOV
tristate
select ASYNC_CORE
select ASYNC_PQ
+ select ASYNC_XOR
+
+config ASYNC_RAID6_TEST
+ tristate "Self test for hardware accelerated raid6 recovery"
+ depends on ASYNC_RAID6_RECOV
+ select ASYNC_MEMCPY
+ ---help---
+ This is a one-shot self test that permutes through the
+ recovery of all the possible two disk failure scenarios for a
+ N-disk array. Recovery is performed with the asynchronous
+ raid6 recovery routines, and will optionally use an offload
+ engine if one is available.
+
+ If unsure, say N.
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 891f7c8490d38..e27ae4604cef3 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -165,19 +165,6 @@ config MULTICORE_RAID456
If unsure, say N.
-config ASYNC_RAID6_TEST
- tristate "Self test for hardware accelerated raid6 recovery"
- depends on RAID6_PQ
- select ASYNC_RAID6_RECOV
- ---help---
- This is a one-shot self test that permutes through the
- recovery of all the possible two disk failure scenarios for a
- N-disk array. Recovery is performed with the asynchronous
- raid6 recovery routines, and will optionally use an offload
- engine if one is available.
-
- If unsure, say N.
-
config MD_MULTIPATH
tristate "Multipath I/O support"
depends on BLK_DEV_MD
--
GitLab
From b51adeae29d1ca07090d4f9c9c886499351e0129 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Thu, 3 Jun 2010 02:37:17 +0200
Subject: [PATCH 003/863] of/mtd: nand: fix build breakage in drivers
Fixes build errors in drivers caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/fsl_upm.c | 17 +++++++++--------
drivers/mtd/nand/socrates_nand.c | 4 ++--
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 2d215ccb564d7..3efceb61e74bb 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -232,7 +232,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
if (!fun)
return -ENOMEM;
- ret = of_address_to_resource(ofdev->node, 0, &io_res);
+ ret = of_address_to_resource(ofdev->dev.of_node, 0, &io_res);
if (ret) {
dev_err(&ofdev->dev, "can't get IO base\n");
goto err1;
@@ -244,7 +244,8 @@ static int __devinit fun_probe(struct of_device *ofdev,
goto err1;
}
- prop = of_get_property(ofdev->node, "fsl,upm-addr-offset", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-addr-offset",
+ &size);
if (!prop || size != sizeof(uint32_t)) {
dev_err(&ofdev->dev, "can't get UPM address offset\n");
ret = -EINVAL;
@@ -252,7 +253,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
}
fun->upm_addr_offset = *prop;
- prop = of_get_property(ofdev->node, "fsl,upm-cmd-offset", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-cmd-offset", &size);
if (!prop || size != sizeof(uint32_t)) {
dev_err(&ofdev->dev, "can't get UPM command offset\n");
ret = -EINVAL;
@@ -260,7 +261,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
}
fun->upm_cmd_offset = *prop;
- prop = of_get_property(ofdev->node,
+ prop = of_get_property(ofdev->dev.of_node,
"fsl,upm-addr-line-cs-offsets", &size);
if (prop && (size / sizeof(uint32_t)) > 0) {
fun->mchip_count = size / sizeof(uint32_t);
@@ -276,7 +277,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
for (i = 0; i < fun->mchip_count; i++) {
fun->rnb_gpio[i] = -1;
- rnb_gpio = of_get_gpio(ofdev->node, i);
+ rnb_gpio = of_get_gpio(ofdev->dev.of_node, i);
if (rnb_gpio >= 0) {
ret = gpio_request(rnb_gpio, dev_name(&ofdev->dev));
if (ret) {
@@ -292,13 +293,13 @@ static int __devinit fun_probe(struct of_device *ofdev,
}
}
- prop = of_get_property(ofdev->node, "chip-delay", NULL);
+ prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
if (prop)
fun->chip_delay = *prop;
else
fun->chip_delay = 50;
- prop = of_get_property(ofdev->node, "fsl,upm-wait-flags", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
if (prop && size == sizeof(uint32_t))
fun->wait_flags = *prop;
else
@@ -315,7 +316,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
fun->dev = &ofdev->dev;
fun->last_ctrl = NAND_CLE;
- ret = fun_chip_init(fun, ofdev->node, &io_res);
+ ret = fun_chip_init(fun, ofdev->dev.of_node, &io_res);
if (ret)
goto err2;
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index b37cbde6e7dbf..f02f8e23d905e 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -183,7 +183,7 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
return -ENOMEM;
}
- host->io_base = of_iomap(ofdev->node, 0);
+ host->io_base = of_iomap(ofdev->dev.of_node, 0);
if (host->io_base == NULL) {
printk(KERN_ERR "socrates_nand: ioremap failed\n");
kfree(host);
@@ -244,7 +244,7 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
#ifdef CONFIG_MTD_OF_PARTS
if (num_partitions == 0) {
num_partitions = of_mtd_parse_partitions(&ofdev->dev,
- ofdev->node,
+ ofdev->dev.of_node,
&partitions);
if (num_partitions < 0) {
res = num_partitions;
--
GitLab
From 00b275dbfc2ae3e3312a910736dd9a6bd5110c2b Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 1 Jun 2010 16:34:20 +0200
Subject: [PATCH 004/863] drivers/mtd/maps: introduce missing kfree
Error handling code following a kmalloc should free the allocated data.
The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
when != if (...) { <+...x...+> }
(
x->f1 = E
|
(x->f1 == NULL || ...)
|
f(...,x->f1,...)
)
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/maps/physmap_of.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 36dbcee1ac29a..859664ad9e784 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -353,7 +353,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
&info->parts, 0);
if (err < 0) {
of_free_probes(part_probe_types);
- return err;
+ goto err_out;
}
of_free_probes(part_probe_types);
@@ -361,14 +361,14 @@ static int __devinit of_flash_probe(struct of_device *dev,
if (err == 0) {
err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
if (err < 0)
- return err;
+ goto err_out;
}
#endif
if (err == 0) {
err = parse_obsolete_partitions(dev, info, dp);
if (err < 0)
- return err;
+ goto err_out;
}
if (err > 0)
--
GitLab
From e3559997ac5dbd45a27805ed7951c7252b2b8ad1 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Tue, 25 May 2010 22:07:53 +0800
Subject: [PATCH 005/863] ncpfs: Remove duplicated #include
Remove duplicated #include('s) in
fs/ncpfs/ioctl.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
fs/ncpfs/ioctl.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c
index 023c03d020707..84a8cfc4e38ec 100644
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -20,7 +20,6 @@
#include <linux/smp_lock.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/ncp_fs.h>
--
GitLab
From d5724956283b0abe89ea828cfc43b6f0715c5568 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Tue, 25 May 2010 22:08:02 +0800
Subject: [PATCH 006/863] sunrpc: Remove duplicated #include
Remove duplicated #include('s) in
net/sunrpc/cache.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
net/sunrpc/cache.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 58de76c8540c6..b75879b173c81 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -34,7 +34,6 @@
#include <linux/sunrpc/cache.h>
#include <linux/sunrpc/stats.h>
#include <linux/sunrpc/rpc_pipe_fs.h>
-#include <linux/smp_lock.h>
#define RPCDBG_FACILITY RPCDBG_CACHE
--
GitLab
From 70d9e384aa7df681cfffd65947af72b22e86690e Mon Sep 17 00:00:00 2001
From: Davidlohr Bueso <dave.bueso@gmail.com>
Date: Tue, 6 Jul 2010 00:50:58 -0400
Subject: [PATCH 007/863] omfs: fix memory leak
In the error path of omfs_fill_super(), the FS super block info
(sbi) is not being freed. Correct this.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
---
fs/omfs/inode.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
index 089839a6cc640..b5d6380e03fbc 100644
--- a/fs/omfs/inode.c
+++ b/fs/omfs/inode.c
@@ -529,6 +529,8 @@ static int omfs_fill_super(struct super_block *sb, void *data, int silent)
out_brelse_bh:
brelse(bh);
end:
+ if (ret)
+ kfree(sbi);
return ret;
}
--
GitLab
From f068272cb2f134a194b93e94a8e0672bfce48cd8 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Sat, 6 Sep 2008 17:51:53 -0400
Subject: [PATCH 008/863] omfs: check bounds on block numbers before passing to
sb_bread
In case of filesystem corruption, passing unchecked block numbers into
sb_bread can result in an infinite loop in __getblk(). Introduce a wrapper
function omfs_sbread() to check the block numbers and to also perform the
clus_to_blk() scaling.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
---
fs/omfs/dir.c | 22 ++++++++--------------
fs/omfs/file.c | 8 ++++----
fs/omfs/inode.c | 27 ++++++++++++++++-----------
fs/omfs/omfs.h | 1 +
4 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index b42d624190347..393f3f659da7b 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -25,11 +25,10 @@ static struct buffer_head *omfs_get_bucket(struct inode *dir,
const char *name, int namelen, int *ofs)
{
int nbuckets = (dir->i_size - OMFS_DIR_START)/8;
- int block = clus_to_blk(OMFS_SB(dir->i_sb), dir->i_ino);
int bucket = omfs_hash(name, namelen, nbuckets);
*ofs = OMFS_DIR_START + bucket * 8;
- return sb_bread(dir->i_sb, block);
+ return omfs_bread(dir->i_sb, dir->i_ino);
}
static struct buffer_head *omfs_scan_list(struct inode *dir, u64 block,
@@ -42,8 +41,7 @@ static struct buffer_head *omfs_scan_list(struct inode *dir, u64 block,
*prev_block = ~0;
while (block != ~0) {
- bh = sb_bread(dir->i_sb,
- clus_to_blk(OMFS_SB(dir->i_sb), block));
+ bh = omfs_bread(dir->i_sb, block);
if (!bh) {
err = -EIO;
goto err;
@@ -86,11 +84,10 @@ static struct buffer_head *omfs_find_entry(struct inode *dir,
int omfs_make_empty(struct inode *inode, struct super_block *sb)
{
struct omfs_sb_info *sbi = OMFS_SB(sb);
- int block = clus_to_blk(sbi, inode->i_ino);
struct buffer_head *bh;
struct omfs_inode *oi;
- bh = sb_bread(sb, block);
+ bh = omfs_bread(sb, inode->i_ino);
if (!bh)
return -ENOMEM;
@@ -134,7 +131,7 @@ static int omfs_add_link(struct dentry *dentry, struct inode *inode)
brelse(bh);
/* now set the sibling and parent pointers on the new inode */
- bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb), inode->i_ino));
+ bh = omfs_bread(dir->i_sb, inode->i_ino);
if (!bh)
goto out;
@@ -190,8 +187,7 @@ static int omfs_delete_entry(struct dentry *dentry)
if (prev != ~0) {
/* found in middle of list, get list ptr */
brelse(bh);
- bh = sb_bread(dir->i_sb,
- clus_to_blk(OMFS_SB(dir->i_sb), prev));
+ bh = omfs_bread(dir->i_sb, prev);
if (!bh)
goto out;
@@ -224,8 +220,7 @@ static int omfs_dir_is_empty(struct inode *inode)
u64 *ptr;
int i;
- bh = sb_bread(inode->i_sb, clus_to_blk(OMFS_SB(inode->i_sb),
- inode->i_ino));
+ bh = omfs_bread(inode->i_sb, inode->i_ino);
if (!bh)
return 0;
@@ -353,8 +348,7 @@ static int omfs_fill_chain(struct file *filp, void *dirent, filldir_t filldir,
/* follow chain in this bucket */
while (fsblock != ~0) {
- bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb),
- fsblock));
+ bh = omfs_bread(dir->i_sb, fsblock);
if (!bh)
goto out;
@@ -466,7 +460,7 @@ static int omfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
hchain = (filp->f_pos >> 20) - 1;
hindex = filp->f_pos & 0xfffff;
- bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb), dir->i_ino));
+ bh = omfs_bread(dir->i_sb, dir->i_ino);
if (!bh)
goto out;
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 6e7a3291bbe8d..76bc21b91a8a4 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -50,7 +50,7 @@ int omfs_shrink_inode(struct inode *inode)
if (inode->i_size != 0)
goto out;
- bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+ bh = omfs_bread(inode->i_sb, next);
if (!bh)
goto out;
@@ -90,7 +90,7 @@ int omfs_shrink_inode(struct inode *inode)
if (next == ~0)
break;
- bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+ bh = omfs_bread(inode->i_sb, next);
if (!bh)
goto out;
oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
@@ -232,7 +232,7 @@ static int omfs_get_block(struct inode *inode, sector_t block,
int remain;
ret = -EIO;
- bh = sb_bread(inode->i_sb, clus_to_blk(sbi, inode->i_ino));
+ bh = omfs_bread(inode->i_sb, inode->i_ino);
if (!bh)
goto out;
@@ -265,7 +265,7 @@ static int omfs_get_block(struct inode *inode, sector_t block,
break;
brelse(bh);
- bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+ bh = omfs_bread(inode->i_sb, next);
if (!bh)
goto out;
oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
index b5d6380e03fbc..bd4bf753a63bf 100644
--- a/fs/omfs/inode.c
+++ b/fs/omfs/inode.c
@@ -19,6 +19,15 @@ MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>");
MODULE_DESCRIPTION("OMFS (ReplayTV/Karma) Filesystem for Linux");
MODULE_LICENSE("GPL");
+struct buffer_head *omfs_bread(struct super_block *sb, sector_t block)
+{
+ struct omfs_sb_info *sbi = OMFS_SB(sb);
+ if (block >= sbi->s_num_blocks)
+ return NULL;
+
+ return sb_bread(sb, clus_to_blk(sbi, block));
+}
+
struct inode *omfs_new_inode(struct inode *dir, int mode)
{
struct inode *inode;
@@ -93,15 +102,13 @@ static int __omfs_write_inode(struct inode *inode, int wait)
struct omfs_inode *oi;
struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
struct buffer_head *bh, *bh2;
- unsigned int block;
u64 ctime;
int i;
int ret = -EIO;
int sync_failed = 0;
/* get current inode since we may have written sibling ptrs etc. */
- block = clus_to_blk(sbi, inode->i_ino);
- bh = sb_bread(inode->i_sb, block);
+ bh = omfs_bread(inode->i_sb, inode->i_ino);
if (!bh)
goto out;
@@ -140,8 +147,7 @@ static int __omfs_write_inode(struct inode *inode, int wait)
/* if mirroring writes, copy to next fsblock */
for (i = 1; i < sbi->s_mirrors; i++) {
- bh2 = sb_bread(inode->i_sb, block + i *
- (sbi->s_blocksize / sbi->s_sys_blocksize));
+ bh2 = omfs_bread(inode->i_sb, inode->i_ino + i);
if (!bh2)
goto out_brelse;
@@ -193,7 +199,6 @@ struct inode *omfs_iget(struct super_block *sb, ino_t ino)
struct omfs_sb_info *sbi = OMFS_SB(sb);
struct omfs_inode *oi;
struct buffer_head *bh;
- unsigned int block;
u64 ctime;
unsigned long nsecs;
struct inode *inode;
@@ -204,8 +209,7 @@ struct inode *omfs_iget(struct super_block *sb, ino_t ino)
if (!(inode->i_state & I_NEW))
return inode;
- block = clus_to_blk(sbi, ino);
- bh = sb_bread(inode->i_sb, block);
+ bh = omfs_bread(inode->i_sb, ino);
if (!bh)
goto iget_failed;
@@ -319,6 +323,9 @@ static int omfs_get_imap(struct super_block *sb)
goto nomem;
block = clus_to_blk(sbi, sbi->s_bitmap_ino);
+ if (block >= sbi->s_num_blocks)
+ goto nomem;
+
ptr = sbi->s_imap;
for (count = bitmap_size; count > 0; count -= sb->s_blocksize) {
bh = sb_bread(sb, block++);
@@ -417,7 +424,6 @@ static int omfs_fill_super(struct super_block *sb, void *data, int silent)
struct omfs_root_block *omfs_rb;
struct omfs_sb_info *sbi;
struct inode *root;
- sector_t start;
int ret = -EINVAL;
save_mount_options(sb, (char *) data);
@@ -486,8 +492,7 @@ static int omfs_fill_super(struct super_block *sb, void *data, int silent)
sbi->s_block_shift = get_bitmask_order(sbi->s_blocksize) -
get_bitmask_order(sbi->s_sys_blocksize);
- start = clus_to_blk(sbi, be64_to_cpu(omfs_sb->s_root_block));
- bh2 = sb_bread(sb, start);
+ bh2 = omfs_bread(sb, be64_to_cpu(omfs_sb->s_root_block));
if (!bh2)
goto out_brelse_bh;
diff --git a/fs/omfs/omfs.h b/fs/omfs/omfs.h
index ebe2fdbe535ec..7d414fef501af 100644
--- a/fs/omfs/omfs.h
+++ b/fs/omfs/omfs.h
@@ -58,6 +58,7 @@ extern void omfs_make_empty_table(struct buffer_head *bh, int offset);
extern int omfs_shrink_inode(struct inode *inode);
/* inode.c */
+extern struct buffer_head *omfs_bread(struct super_block *sb, sector_t block);
extern struct inode *omfs_iget(struct super_block *sb, ino_t inode);
extern struct inode *omfs_new_inode(struct inode *dir, int mode);
extern int omfs_reserve_block(struct super_block *sb, sector_t block);
--
GitLab
From 9442e54f433eff9b6fbd0836611df4c1919df370 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Thu, 14 Aug 2008 18:43:59 -0400
Subject: [PATCH 009/863] omfs: refuse to mount if bitmap pointer is obviously
wrong
If the free space bitmap pointer is corrupted such that it lies outside
of the number of blocks in the filesystem, print a message and fail the
mount so the user can fix it offline.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
---
fs/omfs/inode.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
index bd4bf753a63bf..0af5d0af9f322 100644
--- a/fs/omfs/inode.c
+++ b/fs/omfs/inode.c
@@ -509,6 +509,15 @@ static int omfs_fill_super(struct super_block *sb, void *data, int silent)
goto out_brelse_bh2;
}
+ if (sbi->s_bitmap_ino != ~0ULL &&
+ sbi->s_bitmap_ino > sbi->s_num_blocks) {
+ printk(KERN_ERR "omfs: free space bitmap location is corrupt "
+ "(%llx, total blocks %llx)\n",
+ (unsigned long long) sbi->s_bitmap_ino,
+ (unsigned long long) sbi->s_num_blocks);
+ goto out_brelse_bh2;
+ }
+
ret = omfs_get_imap(sb);
if (ret)
goto out_brelse_bh2;
--
GitLab
From 8800a044c71a128633cf3febaf4780531a991334 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Tue, 6 Jul 2010 11:16:46 -0400
Subject: [PATCH 010/863] omfs: sanity check cluster size
A corrupt filesystem could have a bad cluster size; this could result in
the filesystem allocating too much space for files if too large, or
getting stuck in omfs_allocate_block if too small. The proper range is
1-8 blocks.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
---
fs/omfs/inode.c | 6 ++++++
fs/omfs/omfs_fs.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
index 0af5d0af9f322..579d33fedddd6 100644
--- a/fs/omfs/inode.c
+++ b/fs/omfs/inode.c
@@ -517,6 +517,12 @@ static int omfs_fill_super(struct super_block *sb, void *data, int silent)
(unsigned long long) sbi->s_num_blocks);
goto out_brelse_bh2;
}
+ if (sbi->s_clustersize < 1 ||
+ sbi->s_clustersize > OMFS_MAX_CLUSTER_SIZE) {
+ printk(KERN_ERR "omfs: cluster size out of range (%d)",
+ sbi->s_clustersize);
+ goto out_brelse_bh2;
+ }
ret = omfs_get_imap(sb);
if (ret)
diff --git a/fs/omfs/omfs_fs.h b/fs/omfs/omfs_fs.h
index 12cca245d6e88..ee5e4327de92c 100644
--- a/fs/omfs/omfs_fs.h
+++ b/fs/omfs/omfs_fs.h
@@ -17,6 +17,7 @@
#define OMFS_EXTENT_CONT 0x40
#define OMFS_XOR_COUNT 19
#define OMFS_MAX_BLOCK_SIZE 8192
+#define OMFS_MAX_CLUSTER_SIZE 8
struct omfs_super_block {
char s_fill1[256];
--
GitLab
From 8fd00b4d7014b00448eb33cf0590815304769798 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Wed, 26 Aug 2009 18:41:16 +0200
Subject: [PATCH 011/863] rlimits: security, add task_struct to setrlimit
Add task_struct to task_setrlimit of security_operations to be able to set
rlimit of task other than current.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
---
include/linux/security.h | 9 ++++++---
kernel/sys.c | 2 +-
security/capability.c | 3 ++-
security/security.c | 5 +++--
security/selinux/hooks.c | 7 ++++---
5 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/include/linux/security.h b/include/linux/security.h
index 0c88191704636..1a3eb5ff4357b 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -1501,7 +1501,8 @@ struct security_operations {
int (*task_setnice) (struct task_struct *p, int nice);
int (*task_setioprio) (struct task_struct *p, int ioprio);
int (*task_getioprio) (struct task_struct *p);
- int (*task_setrlimit) (unsigned int resource, struct rlimit *new_rlim);
+ int (*task_setrlimit) (struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim);
int (*task_setscheduler) (struct task_struct *p, int policy,
struct sched_param *lp);
int (*task_getscheduler) (struct task_struct *p);
@@ -1751,7 +1752,8 @@ void security_task_getsecid(struct task_struct *p, u32 *secid);
int security_task_setnice(struct task_struct *p, int nice);
int security_task_setioprio(struct task_struct *p, int ioprio);
int security_task_getioprio(struct task_struct *p);
-int security_task_setrlimit(unsigned int resource, struct rlimit *new_rlim);
+int security_task_setrlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim);
int security_task_setscheduler(struct task_struct *p,
int policy, struct sched_param *lp);
int security_task_getscheduler(struct task_struct *p);
@@ -2313,7 +2315,8 @@ static inline int security_task_getioprio(struct task_struct *p)
return 0;
}
-static inline int security_task_setrlimit(unsigned int resource,
+static inline int security_task_setrlimit(struct task_struct *p,
+ unsigned int resource,
struct rlimit *new_rlim)
{
return 0;
diff --git a/kernel/sys.c b/kernel/sys.c
index e83ddbbaf89d1..1ba4522689d46 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1290,7 +1290,7 @@ SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > sysctl_nr_open)
return -EPERM;
- retval = security_task_setrlimit(resource, &new_rlim);
+ retval = security_task_setrlimit(current, resource, &new_rlim);
if (retval)
return retval;
diff --git a/security/capability.c b/security/capability.c
index 8168e3ecd5bf9..7e468263f2dec 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -412,7 +412,8 @@ static int cap_task_getioprio(struct task_struct *p)
return 0;
}
-static int cap_task_setrlimit(unsigned int resource, struct rlimit *new_rlim)
+static int cap_task_setrlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim)
{
return 0;
}
diff --git a/security/security.c b/security/security.c
index 351942a4ca0e7..aa510609a9554 100644
--- a/security/security.c
+++ b/security/security.c
@@ -769,9 +769,10 @@ int security_task_getioprio(struct task_struct *p)
return security_ops->task_getioprio(p);
}
-int security_task_setrlimit(unsigned int resource, struct rlimit *new_rlim)
+int security_task_setrlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim)
{
- return security_ops->task_setrlimit(resource, new_rlim);
+ return security_ops->task_setrlimit(p, resource, new_rlim);
}
int security_task_setscheduler(struct task_struct *p,
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 5c9f25ba1c953..e3ce6b4127cc8 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3371,16 +3371,17 @@ static int selinux_task_getioprio(struct task_struct *p)
return current_has_perm(p, PROCESS__GETSCHED);
}
-static int selinux_task_setrlimit(unsigned int resource, struct rlimit *new_rlim)
+static int selinux_task_setrlimit(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim)
{
- struct rlimit *old_rlim = current->signal->rlim + resource;
+ struct rlimit *old_rlim = p->signal->rlim + resource;
/* Control the ability to change the hard limit (whether
lowering or raising it), so that the hard limit can
later be used as a safe reset point for the soft limit
upon context transitions. See selinux_bprm_committing_creds. */
if (old_rlim->rlim_max != new_rlim->rlim_max)
- return current_has_perm(current, PROCESS__SETRLIMIT);
+ return current_has_perm(p, PROCESS__SETRLIMIT);
return 0;
}
--
GitLab
From 5ab46b345e418747b3a52f0892680c0745c4223c Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 28 Aug 2009 14:05:12 +0200
Subject: [PATCH 012/863] rlimits: add task_struct to update_rlimit_cpu
Add task_struct as a parameter to update_rlimit_cpu to be able to set
rlimit_cpu of different task than current.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
---
include/linux/posix-timers.h | 2 +-
kernel/posix-cpu-timers.c | 8 ++++----
kernel/sys.c | 2 +-
security/selinux/hooks.c | 3 ++-
4 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
index 4f71bf4e628c0..3e23844a6990c 100644
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -117,6 +117,6 @@ void set_process_cpu_timer(struct task_struct *task, unsigned int clock_idx,
long clock_nanosleep_restart(struct restart_block *restart_block);
-void update_rlimit_cpu(unsigned long rlim_new);
+void update_rlimit_cpu(struct task_struct *task, unsigned long rlim_new);
#endif
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 9829646d399c5..0513900995ceb 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -16,13 +16,13 @@
* siglock protection since other code may update expiration cache as
* well.
*/
-void update_rlimit_cpu(unsigned long rlim_new)
+void update_rlimit_cpu(struct task_struct *task, unsigned long rlim_new)
{
cputime_t cputime = secs_to_cputime(rlim_new);
- spin_lock_irq(¤t->sighand->siglock);
- set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL);
- spin_unlock_irq(¤t->sighand->siglock);
+ spin_lock_irq(&task->sighand->siglock);
+ set_process_cpu_timer(task, CPUCLOCK_PROF, &cputime, NULL);
+ spin_unlock_irq(&task->sighand->siglock);
}
static int check_clock(const clockid_t which_clock)
diff --git a/kernel/sys.c b/kernel/sys.c
index 1ba4522689d46..f5183b08adfcd 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1320,7 +1320,7 @@ SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
if (new_rlim.rlim_cur == RLIM_INFINITY)
goto out;
- update_rlimit_cpu(new_rlim.rlim_cur);
+ update_rlimit_cpu(current, new_rlim.rlim_cur);
out:
return 0;
}
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index e3ce6b4127cc8..afb18a9ebba11 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2338,7 +2338,8 @@ static void selinux_bprm_committing_creds(struct linux_binprm *bprm)
initrlim = init_task.signal->rlim + i;
rlim->rlim_cur = min(rlim->rlim_max, initrlim->rlim_cur);
}
- update_rlimit_cpu(current->signal->rlim[RLIMIT_CPU].rlim_cur);
+ update_rlimit_cpu(current,
+ current->signal->rlim[RLIMIT_CPU].rlim_cur);
}
}
--
GitLab
From 2fb9d2689a0041b88b25bc3187eada2968e25995 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Thu, 3 Sep 2009 19:21:45 +0200
Subject: [PATCH 013/863] rlimits: make sure ->rlim_max never grows in
sys_setrlimit
Mostly preparation for Jiri's changes, but probably makes sense anyway.
sys_setrlimit() checks new_rlim.rlim_max <= old_rlim->rlim_max, but when
it takes task_lock() old_rlim->rlim_max can be already lowered. Move this
check under task_lock().
Currently this is not important, we can only race with our sub-thread,
this means the application is stupid. But when we change the code to allow
the update of !current task's limits, it becomes important to make sure
->rlim_max can be lowered "reliably" even if we race with the application
doing sys_setrlimit().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
kernel/sys.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/kernel/sys.c b/kernel/sys.c
index f5183b08adfcd..f2b2d7aa3818a 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1283,10 +1283,6 @@ SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
return -EFAULT;
if (new_rlim.rlim_cur > new_rlim.rlim_max)
return -EINVAL;
- old_rlim = current->signal->rlim + resource;
- if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
- !capable(CAP_SYS_RESOURCE))
- return -EPERM;
if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > sysctl_nr_open)
return -EPERM;
@@ -1304,11 +1300,16 @@ SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
new_rlim.rlim_cur = 1;
}
+ old_rlim = current->signal->rlim + resource;
task_lock(current->group_leader);
- *old_rlim = new_rlim;
+ if (new_rlim.rlim_max > old_rlim->rlim_max &&
+ !capable(CAP_SYS_RESOURCE))
+ retval = -EPERM;
+ else
+ *old_rlim = new_rlim;
task_unlock(current->group_leader);
- if (resource != RLIMIT_CPU)
+ if (retval || resource != RLIMIT_CPU)
goto out;
/*
@@ -1322,7 +1323,7 @@ SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
update_rlimit_cpu(current, new_rlim.rlim_cur);
out:
- return 0;
+ return retval;
}
/*
--
GitLab
From eb2d55a32b9a91bca0dea299eedb560bafa8b14e Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Wed, 23 Jun 2010 22:43:32 +0200
Subject: [PATCH 014/863] rlimits: selinux, do rlimits changes under task_lock
When doing an exec, selinux updates rlimits in its code of current
process depending on current max. Make sure max or cur doesn't change
in the meantime by grabbing task_lock which do_prlimit needs for
changing limits too.
While at it, use rlimit helper for accessing CPU rlimit a line below.
To have a volatile access too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
---
security/selinux/hooks.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index afb18a9ebba11..2a8a0a915ff38 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2333,13 +2333,15 @@ static void selinux_bprm_committing_creds(struct linux_binprm *bprm)
rc = avc_has_perm(new_tsec->osid, new_tsec->sid, SECCLASS_PROCESS,
PROCESS__RLIMITINH, NULL);
if (rc) {
+ /* protect against do_prlimit() */
+ task_lock(current);
for (i = 0; i < RLIM_NLIMITS; i++) {
rlim = current->signal->rlim + i;
initrlim = init_task.signal->rlim + i;
rlim->rlim_cur = min(rlim->rlim_max, initrlim->rlim_cur);
}
- update_rlimit_cpu(current,
- current->signal->rlim[RLIMIT_CPU].rlim_cur);
+ task_unlock(current);
+ update_rlimit_cpu(current, rlimit(RLIMIT_CPU));
}
}
--
GitLab
From 7855c35da7ba16b389d17710401c4a55a3ea2102 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Wed, 26 Aug 2009 23:45:34 +0200
Subject: [PATCH 015/863] rlimits: split sys_setrlimit
Create do_setrlimit from sys_setrlimit and declare do_setrlimit
in the resource header. This is the first phase to have generic
do_prlimit which allows to be called from read, write and compat
rlimits code.
The new do_setrlimit also accepts a task pointer to change the limits
of. Currently, it cannot be other than current, but this will change
with locking later.
Also pass tsk->group_leader to security_task_setrlimit to check
whether current is allowed to change rlimits of the process and not
its arbitrary thread because it makes more sense given that rlimit are
per process and not per-thread.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
include/linux/resource.h | 2 ++
kernel/sys.c | 40 ++++++++++++++++++++++++----------------
2 files changed, 26 insertions(+), 16 deletions(-)
diff --git a/include/linux/resource.h b/include/linux/resource.h
index f1e914eefeab8..cf8dc96653eed 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -73,6 +73,8 @@ struct rlimit {
struct task_struct;
int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
+int do_setrlimit(struct task_struct *tsk, unsigned int resource,
+ struct rlimit *new_rlim);
#endif /* __KERNEL__ */
diff --git a/kernel/sys.c b/kernel/sys.c
index f2b2d7aa3818a..b5b96e30e0d64 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1272,42 +1272,41 @@ SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
#endif
-SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
+int do_setrlimit(struct task_struct *tsk, unsigned int resource,
+ struct rlimit *new_rlim)
{
- struct rlimit new_rlim, *old_rlim;
+ struct rlimit *old_rlim;
int retval;
if (resource >= RLIM_NLIMITS)
return -EINVAL;
- if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
- return -EFAULT;
- if (new_rlim.rlim_cur > new_rlim.rlim_max)
+ if (new_rlim->rlim_cur > new_rlim->rlim_max)
return -EINVAL;
- if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > sysctl_nr_open)
+ if (resource == RLIMIT_NOFILE && new_rlim->rlim_max > sysctl_nr_open)
return -EPERM;
- retval = security_task_setrlimit(current, resource, &new_rlim);
+ retval = security_task_setrlimit(tsk->group_leader, resource, new_rlim);
if (retval)
return retval;
- if (resource == RLIMIT_CPU && new_rlim.rlim_cur == 0) {
+ if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
/*
* The caller is asking for an immediate RLIMIT_CPU
* expiry. But we use the zero value to mean "it was
* never set". So let's cheat and make it one second
* instead
*/
- new_rlim.rlim_cur = 1;
+ new_rlim->rlim_cur = 1;
}
- old_rlim = current->signal->rlim + resource;
- task_lock(current->group_leader);
- if (new_rlim.rlim_max > old_rlim->rlim_max &&
+ old_rlim = tsk->signal->rlim + resource;
+ task_lock(tsk->group_leader);
+ if (new_rlim->rlim_max > old_rlim->rlim_max &&
!capable(CAP_SYS_RESOURCE))
retval = -EPERM;
else
- *old_rlim = new_rlim;
- task_unlock(current->group_leader);
+ *old_rlim = *new_rlim;
+ task_unlock(tsk->group_leader);
if (retval || resource != RLIMIT_CPU)
goto out;
@@ -1318,14 +1317,23 @@ SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
* very long-standing error, and fixing it now risks breakage of
* applications, so we live with it
*/
- if (new_rlim.rlim_cur == RLIM_INFINITY)
+ if (new_rlim->rlim_cur == RLIM_INFINITY)
goto out;
- update_rlimit_cpu(current, new_rlim.rlim_cur);
+ update_rlimit_cpu(tsk, new_rlim->rlim_cur);
out:
return retval;
}
+SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
+{
+ struct rlimit new_rlim;
+
+ if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
+ return -EFAULT;
+ return do_setrlimit(current, resource, &new_rlim);
+}
+
/*
* It would make sense to put struct rusage in the task_struct,
* except that would make the task_struct be *really big*. After
--
GitLab
From 1c1e618ddd15f69fd87ccea596769f78c8065504 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 28 Aug 2009 14:08:17 +0200
Subject: [PATCH 016/863] rlimits: allow setrlimit to non-current tasks
Add locking to allow setrlimit accept task parameter other than
current.
Namely, lock tasklist_lock for read and check whether the task
structure has sighand non-null. Do all the signal processing under
that lock still held.
There are some points:
1) security_task_setrlimit is now called with that lock held. This is
not new, many security_* functions are called with this lock held
already so it doesn't harm (all this security_* stuff does almost
the same).
2) task->sighand->siglock (in update_rlimit_cpu) is nested in
tasklist_lock. This dependence is already existing.
3) tsk->alloc_lock is nested in tasklist_lock. This is OK too, already
existing dependence.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
---
kernel/sys.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/kernel/sys.c b/kernel/sys.c
index b5b96e30e0d64..9dbcbbcce1538 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1272,6 +1272,7 @@ SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
#endif
+/* make sure you are allowed to change @tsk limits before calling this */
int do_setrlimit(struct task_struct *tsk, unsigned int resource,
struct rlimit *new_rlim)
{
@@ -1285,9 +1286,16 @@ int do_setrlimit(struct task_struct *tsk, unsigned int resource,
if (resource == RLIMIT_NOFILE && new_rlim->rlim_max > sysctl_nr_open)
return -EPERM;
+ /* protect tsk->signal and tsk->sighand from disappearing */
+ read_lock(&tasklist_lock);
+ if (!tsk->sighand) {
+ retval = -ESRCH;
+ goto out;
+ }
+
retval = security_task_setrlimit(tsk->group_leader, resource, new_rlim);
if (retval)
- return retval;
+ goto out;
if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
/*
@@ -1322,6 +1330,7 @@ int do_setrlimit(struct task_struct *tsk, unsigned int resource,
update_rlimit_cpu(tsk, new_rlim->rlim_cur);
out:
+ read_unlock(&tasklist_lock);
return retval;
}
--
GitLab
From 86f162f4c75ceb6daf43165469eeeca1bc3d4639 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Sat, 14 Nov 2009 17:37:04 +0100
Subject: [PATCH 017/863] rlimits: do security check under task_lock
Do security_task_setrlimit under task_lock. Other tasks may change
limits under our hands while we are checking limits inside the
function. From now on, they can't.
Note that all the security work is done under a spinlock here now.
Security hooks count with that, they are called from interrupt context
(like security_task_kill) and with spinlocks already held (e.g.
capable->security_capable).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: James Morris <jmorris@namei.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
---
kernel/sys.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/kernel/sys.c b/kernel/sys.c
index 9dbcbbcce1538..c762eebdebf7b 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1277,7 +1277,7 @@ int do_setrlimit(struct task_struct *tsk, unsigned int resource,
struct rlimit *new_rlim)
{
struct rlimit *old_rlim;
- int retval;
+ int retval = 0;
if (resource >= RLIM_NLIMITS)
return -EINVAL;
@@ -1293,9 +1293,14 @@ int do_setrlimit(struct task_struct *tsk, unsigned int resource,
goto out;
}
- retval = security_task_setrlimit(tsk->group_leader, resource, new_rlim);
- if (retval)
- goto out;
+ old_rlim = tsk->signal->rlim + resource;
+ task_lock(tsk->group_leader);
+ if (new_rlim->rlim_max > old_rlim->rlim_max &&
+ !capable(CAP_SYS_RESOURCE))
+ retval = -EPERM;
+ if (!retval)
+ retval = security_task_setrlimit(tsk->group_leader, resource,
+ new_rlim);
if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
/*
@@ -1307,12 +1312,7 @@ int do_setrlimit(struct task_struct *tsk, unsigned int resource,
new_rlim->rlim_cur = 1;
}
- old_rlim = tsk->signal->rlim + resource;
- task_lock(tsk->group_leader);
- if (new_rlim->rlim_max > old_rlim->rlim_max &&
- !capable(CAP_SYS_RESOURCE))
- retval = -EPERM;
- else
+ if (!retval)
*old_rlim = *new_rlim;
task_unlock(tsk->group_leader);
--
GitLab
From 6a1d5e2c85d06da35cdfd93f1a27675bfdc3ad8c Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Wed, 24 Mar 2010 17:06:58 +0100
Subject: [PATCH 018/863] rlimits: add rlimit64 structure
Add a platform independent structure for resource limits to use with
a new prlimit64 syscall. This structure is the same which uses glibc
for 64-bit limits.
Also add corresponding infinity which is a 64-bit full of bit-ones.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
include/linux/resource.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/linux/resource.h b/include/linux/resource.h
index cf8dc96653eed..037aa7e6335da 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -43,6 +43,13 @@ struct rlimit {
unsigned long rlim_max;
};
+#define RLIM64_INFINITY (~0ULL)
+
+struct rlimit64 {
+ __u64 rlim_cur;
+ __u64 rlim_max;
+};
+
#define PRIO_MIN (-20)
#define PRIO_MAX 20
--
GitLab
From 5b41535aac0c07135ff6a4c5c2ae115d1c20c0bc Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Wed, 24 Mar 2010 16:11:29 +0100
Subject: [PATCH 019/863] rlimits: redo do_setrlimit to more generic do_prlimit
It now allows also reading of limits. I.e. all read and writes will
later use this function.
It takes two parameters, new and old limits which can be both NULL.
If new is non-NULL, the value in it is set to rlimits.
If old is non-NULL, current rlimits are stored there.
If both are non-NULL, old are stored prior to setting the new ones,
atomically.
(Similar to sigaction.)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
include/linux/resource.h | 4 +--
kernel/sys.c | 71 +++++++++++++++++++++-------------------
2 files changed, 39 insertions(+), 36 deletions(-)
diff --git a/include/linux/resource.h b/include/linux/resource.h
index 037aa7e6335da..88d36f9145bac 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -80,8 +80,8 @@ struct rlimit64 {
struct task_struct;
int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
-int do_setrlimit(struct task_struct *tsk, unsigned int resource,
- struct rlimit *new_rlim);
+int do_prlimit(struct task_struct *tsk, unsigned int resource,
+ struct rlimit *new_rlim, struct rlimit *old_rlim);
#endif /* __KERNEL__ */
diff --git a/kernel/sys.c b/kernel/sys.c
index c762eebdebf7b..bc7d1be0960e4 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1273,18 +1273,21 @@ SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
#endif
/* make sure you are allowed to change @tsk limits before calling this */
-int do_setrlimit(struct task_struct *tsk, unsigned int resource,
- struct rlimit *new_rlim)
+int do_prlimit(struct task_struct *tsk, unsigned int resource,
+ struct rlimit *new_rlim, struct rlimit *old_rlim)
{
- struct rlimit *old_rlim;
+ struct rlimit *rlim;
int retval = 0;
if (resource >= RLIM_NLIMITS)
return -EINVAL;
- if (new_rlim->rlim_cur > new_rlim->rlim_max)
- return -EINVAL;
- if (resource == RLIMIT_NOFILE && new_rlim->rlim_max > sysctl_nr_open)
- return -EPERM;
+ if (new_rlim) {
+ if (new_rlim->rlim_cur > new_rlim->rlim_max)
+ return -EINVAL;
+ if (resource == RLIMIT_NOFILE &&
+ new_rlim->rlim_max > sysctl_nr_open)
+ return -EPERM;
+ }
/* protect tsk->signal and tsk->sighand from disappearing */
read_lock(&tasklist_lock);
@@ -1293,42 +1296,42 @@ int do_setrlimit(struct task_struct *tsk, unsigned int resource,
goto out;
}
- old_rlim = tsk->signal->rlim + resource;
+ rlim = tsk->signal->rlim + resource;
task_lock(tsk->group_leader);
- if (new_rlim->rlim_max > old_rlim->rlim_max &&
- !capable(CAP_SYS_RESOURCE))
- retval = -EPERM;
- if (!retval)
- retval = security_task_setrlimit(tsk->group_leader, resource,
- new_rlim);
-
- if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
- /*
- * The caller is asking for an immediate RLIMIT_CPU
- * expiry. But we use the zero value to mean "it was
- * never set". So let's cheat and make it one second
- * instead
- */
- new_rlim->rlim_cur = 1;
+ if (new_rlim) {
+ if (new_rlim->rlim_max > rlim->rlim_max &&
+ !capable(CAP_SYS_RESOURCE))
+ retval = -EPERM;
+ if (!retval)
+ retval = security_task_setrlimit(tsk->group_leader,
+ resource, new_rlim);
+ if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
+ /*
+ * The caller is asking for an immediate RLIMIT_CPU
+ * expiry. But we use the zero value to mean "it was
+ * never set". So let's cheat and make it one second
+ * instead
+ */
+ new_rlim->rlim_cur = 1;
+ }
+ }
+ if (!retval) {
+ if (old_rlim)
+ *old_rlim = *rlim;
+ if (new_rlim)
+ *rlim = *new_rlim;
}
-
- if (!retval)
- *old_rlim = *new_rlim;
task_unlock(tsk->group_leader);
- if (retval || resource != RLIMIT_CPU)
- goto out;
-
/*
* RLIMIT_CPU handling. Note that the kernel fails to return an error
* code if it rejected the user's attempt to set RLIMIT_CPU. This is a
* very long-standing error, and fixing it now risks breakage of
* applications, so we live with it
*/
- if (new_rlim->rlim_cur == RLIM_INFINITY)
- goto out;
-
- update_rlimit_cpu(tsk, new_rlim->rlim_cur);
+ if (!retval && new_rlim && resource == RLIMIT_CPU &&
+ new_rlim->rlim_cur != RLIM_INFINITY)
+ update_rlimit_cpu(tsk, new_rlim->rlim_cur);
out:
read_unlock(&tasklist_lock);
return retval;
@@ -1340,7 +1343,7 @@ SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
return -EFAULT;
- return do_setrlimit(current, resource, &new_rlim);
+ return do_prlimit(current, resource, &new_rlim, NULL);
}
/*
--
GitLab
From b95183453af2ed14a5c7027e58049c9fd17e92ce Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Tue, 4 May 2010 11:28:25 +0200
Subject: [PATCH 020/863] rlimits: switch more rlimit syscalls to do_prlimit
After we added more generic do_prlimit, switch sys_getrlimit to that.
Also switch compat handling, so we can get rid of ugly __user casts
and avoid setting process' address limit to kernel data and back.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
kernel/compat.c | 17 +++--------------
kernel/sys.c | 17 ++++++++---------
2 files changed, 11 insertions(+), 23 deletions(-)
diff --git a/kernel/compat.c b/kernel/compat.c
index 5adab05a3172c..e167efce8423e 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -279,11 +279,6 @@ asmlinkage long compat_sys_setrlimit(unsigned int resource,
struct compat_rlimit __user *rlim)
{
struct rlimit r;
- int ret;
- mm_segment_t old_fs = get_fs ();
-
- if (resource >= RLIM_NLIMITS)
- return -EINVAL;
if (!access_ok(VERIFY_READ, rlim, sizeof(*rlim)) ||
__get_user(r.rlim_cur, &rlim->rlim_cur) ||
@@ -294,10 +289,7 @@ asmlinkage long compat_sys_setrlimit(unsigned int resource,
r.rlim_cur = RLIM_INFINITY;
if (r.rlim_max == COMPAT_RLIM_INFINITY)
r.rlim_max = RLIM_INFINITY;
- set_fs(KERNEL_DS);
- ret = sys_setrlimit(resource, (struct rlimit __user *) &r);
- set_fs(old_fs);
- return ret;
+ return do_prlimit(current, resource, &r, NULL);
}
#ifdef COMPAT_RLIM_OLD_INFINITY
@@ -329,16 +321,13 @@ asmlinkage long compat_sys_old_getrlimit(unsigned int resource,
#endif
-asmlinkage long compat_sys_getrlimit (unsigned int resource,
+asmlinkage long compat_sys_getrlimit(unsigned int resource,
struct compat_rlimit __user *rlim)
{
struct rlimit r;
int ret;
- mm_segment_t old_fs = get_fs();
- set_fs(KERNEL_DS);
- ret = sys_getrlimit(resource, (struct rlimit __user *) &r);
- set_fs(old_fs);
+ ret = do_prlimit(current, resource, NULL, &r);
if (!ret) {
if (r.rlim_cur > COMPAT_RLIM_INFINITY)
r.rlim_cur = COMPAT_RLIM_INFINITY;
diff --git a/kernel/sys.c b/kernel/sys.c
index bc7d1be0960e4..9da98dd472761 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1236,15 +1236,14 @@ SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
- if (resource >= RLIM_NLIMITS)
- return -EINVAL;
- else {
- struct rlimit value;
- task_lock(current->group_leader);
- value = current->signal->rlim[resource];
- task_unlock(current->group_leader);
- return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
- }
+ struct rlimit value;
+ int ret;
+
+ ret = do_prlimit(current, resource, NULL, &value);
+ if (!ret)
+ ret = copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
+
+ return ret;
}
#ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
--
GitLab
From c022a0acad534fd5f5d5f17280f6d4d135e74e81 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Tue, 4 May 2010 18:03:50 +0200
Subject: [PATCH 021/863] rlimits: implement prlimit64 syscall
This patch adds the code to support the sys_prlimit64 syscall which
modifies-and-returns the rlim values of a selected process atomically.
The first parameter, pid, being 0 means current process.
Unlike the current implementation, it is a generic interface,
architecture indepentent so that we needn't handle compat stuff
anymore. In the future, after glibc start to use this we can deprecate
sys_setrlimit and sys_getrlimit in favor to clean up the code finally.
It also adds a possibility of changing limits of other processes. We
check the user's permissions to do that and if it succeeds, the new
limits are propagated online. This is good for large scale
applications such as SAP or databases where administrators need to
change limits time by time (e.g. on crashes increase core size). And
it is unacceptable to restart the service.
For safety, all rlim users now either use accessors or doesn't need
them due to
- locking
- the fact a process was just forked and nobody else knows about it
yet (and nobody can't thus read/write limits)
hence it is safe to modify limits now.
The limitation is that we currently stay at ulong internal
representation. So the rlim64_is_infinity check is used where value is
compared against ULONG_MAX on 32-bit which is the maximum value there.
And since internally the limits are held in struct rlimit, converters
which are used before and after do_prlimit call in sys_prlimit64 are
introduced.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
include/linux/syscalls.h | 4 ++
kernel/sys.c | 94 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 98 insertions(+)
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 7f614ce274a91..a60943be4270d 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -35,6 +35,7 @@ struct oldold_utsname;
struct old_utsname;
struct pollfd;
struct rlimit;
+struct rlimit64;
struct rusage;
struct sched_param;
struct sel_arg_struct;
@@ -644,6 +645,9 @@ asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *r
#endif
asmlinkage long sys_setrlimit(unsigned int resource,
struct rlimit __user *rlim);
+asmlinkage long sys_prlimit64(pid_t pid, unsigned int resource,
+ const struct rlimit64 __user *new_rlim,
+ struct rlimit64 __user *old_rlim);
asmlinkage long sys_getrusage(int who, struct rusage __user *ru);
asmlinkage long sys_umask(int mask);
diff --git a/kernel/sys.c b/kernel/sys.c
index 9da98dd472761..e9ad444898286 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1271,6 +1271,39 @@ SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
#endif
+static inline bool rlim64_is_infinity(__u64 rlim64)
+{
+#if BITS_PER_LONG < 64
+ return rlim64 >= ULONG_MAX;
+#else
+ return rlim64 == RLIM64_INFINITY;
+#endif
+}
+
+static void rlim_to_rlim64(const struct rlimit *rlim, struct rlimit64 *rlim64)
+{
+ if (rlim->rlim_cur == RLIM_INFINITY)
+ rlim64->rlim_cur = RLIM64_INFINITY;
+ else
+ rlim64->rlim_cur = rlim->rlim_cur;
+ if (rlim->rlim_max == RLIM_INFINITY)
+ rlim64->rlim_max = RLIM64_INFINITY;
+ else
+ rlim64->rlim_max = rlim->rlim_max;
+}
+
+static void rlim64_to_rlim(const struct rlimit64 *rlim64, struct rlimit *rlim)
+{
+ if (rlim64_is_infinity(rlim64->rlim_cur))
+ rlim->rlim_cur = RLIM_INFINITY;
+ else
+ rlim->rlim_cur = (unsigned long)rlim64->rlim_cur;
+ if (rlim64_is_infinity(rlim64->rlim_max))
+ rlim->rlim_max = RLIM_INFINITY;
+ else
+ rlim->rlim_max = (unsigned long)rlim64->rlim_max;
+}
+
/* make sure you are allowed to change @tsk limits before calling this */
int do_prlimit(struct task_struct *tsk, unsigned int resource,
struct rlimit *new_rlim, struct rlimit *old_rlim)
@@ -1336,6 +1369,67 @@ int do_prlimit(struct task_struct *tsk, unsigned int resource,
return retval;
}
+/* rcu lock must be held */
+static int check_prlimit_permission(struct task_struct *task)
+{
+ const struct cred *cred = current_cred(), *tcred;
+
+ tcred = __task_cred(task);
+ if ((cred->uid != tcred->euid ||
+ cred->uid != tcred->suid ||
+ cred->uid != tcred->uid ||
+ cred->gid != tcred->egid ||
+ cred->gid != tcred->sgid ||
+ cred->gid != tcred->gid) &&
+ !capable(CAP_SYS_RESOURCE)) {
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+SYSCALL_DEFINE4(prlimit64, pid_t, pid, unsigned int, resource,
+ const struct rlimit64 __user *, new_rlim,
+ struct rlimit64 __user *, old_rlim)
+{
+ struct rlimit64 old64, new64;
+ struct rlimit old, new;
+ struct task_struct *tsk;
+ int ret;
+
+ if (new_rlim) {
+ if (copy_from_user(&new64, new_rlim, sizeof(new64)))
+ return -EFAULT;
+ rlim64_to_rlim(&new64, &new);
+ }
+
+ rcu_read_lock();
+ tsk = pid ? find_task_by_vpid(pid) : current;
+ if (!tsk) {
+ rcu_read_unlock();
+ return -ESRCH;
+ }
+ ret = check_prlimit_permission(tsk);
+ if (ret) {
+ rcu_read_unlock();
+ return ret;
+ }
+ get_task_struct(tsk);
+ rcu_read_unlock();
+
+ ret = do_prlimit(tsk, resource, new_rlim ? &new : NULL,
+ old_rlim ? &old : NULL);
+
+ if (!ret && old_rlim) {
+ rlim_to_rlim64(&old, &old64);
+ if (copy_to_user(old_rlim, &old64, sizeof(old64)))
+ ret = -EFAULT;
+ }
+
+ put_task_struct(tsk);
+ return ret;
+}
+
SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
struct rlimit new_rlim;
--
GitLab
From f33ebbe9da2c3c24664a0ad4f8fd83f293547e63 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 6 May 2010 20:17:00 +0200
Subject: [PATCH 022/863] unistd: add __NR_prlimit64 syscall numbers
Add __NR_prlimit64 syscall numbers to asm-generic. Add them also to
asm-x86, both 32 and 64-bit.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
arch/x86/ia32/ia32entry.S | 1 +
arch/x86/include/asm/unistd_32.h | 3 ++-
arch/x86/include/asm/unistd_64.h | 2 ++
arch/x86/kernel/syscall_table_32.S | 1 +
include/asm-generic/unistd.h | 4 +++-
5 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index e790bc1fbfa3a..a88e31d1836ea 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -842,4 +842,5 @@ ia32_sys_call_table:
.quad compat_sys_rt_tgsigqueueinfo /* 335 */
.quad sys_perf_event_open
.quad compat_sys_recvmmsg
+ .quad sys_prlimit64
ia32_syscall_end:
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index beb9b5f8f8a41..35e0cb151b693 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -343,10 +343,11 @@
#define __NR_rt_tgsigqueueinfo 335
#define __NR_perf_event_open 336
#define __NR_recvmmsg 337
+#define __NR_prlimit64 338
#ifdef __KERNEL__
-#define NR_syscalls 338
+#define NR_syscalls 339
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index ff4307b0e81e1..570bf5eae5640 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -663,6 +663,8 @@ __SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
#define __NR_recvmmsg 299
__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
+#define __NR_prlimit64 300
+__SYSCALL(__NR_prlimit64, sys_prlimit64)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 8b3729341216c..eca1d7d23ab56 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -337,3 +337,4 @@ ENTRY(sys_call_table)
.long sys_rt_tgsigqueueinfo /* 335 */
.long sys_perf_event_open
.long sys_recvmmsg
+ .long sys_prlimit64
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
index 6a0b30f78a625..0dfd517e5ec93 100644
--- a/include/asm-generic/unistd.h
+++ b/include/asm-generic/unistd.h
@@ -626,9 +626,11 @@ __SYSCALL(__NR_perf_event_open, sys_perf_event_open)
__SYSCALL(__NR_accept4, sys_accept4)
#define __NR_recvmmsg 243
__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
+#define __NR_prlimit64 244
+__SYSCALL(__NR_prlimit64, sys_prlimit64)
#undef __NR_syscalls
-#define __NR_syscalls 244
+#define __NR_syscalls 245
/*
* All syscalls below here should go away really,
--
GitLab
From a7686a45c07462b78df5ac15fc696a86e57ccf91 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 19 Jul 2010 11:54:16 +0100
Subject: [PATCH 023/863] kmemleak: Show more information for objects found by
alias
There may be situations when an object is freed using a pointer inside
the memory block. Kmemleak should show more information to help with
debugging.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
mm/kmemleak.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 2c0d032ac8983..c2c9feb3097f8 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -398,7 +398,9 @@ static struct kmemleak_object *lookup_object(unsigned long ptr, int alias)
object = prio_tree_entry(node, struct kmemleak_object,
tree_node);
if (!alias && object->pointer != ptr) {
- kmemleak_warn("Found object by alias");
+ pr_warning("Found object by alias at 0x%08lx\n", ptr);
+ dump_stack();
+ dump_object_info(object);
object = NULL;
}
} else
--
GitLab
From ab0155a22ad5bda3a6dbfbbecc416cbe92619755 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 19 Jul 2010 11:54:17 +0100
Subject: [PATCH 024/863] kmemleak: Introduce a default off mode for kmemleak
Introduce a new DEBUG_KMEMLEAK_DEFAULT_OFF config parameter that allows
kmemleak to be disabled by default, but enabled on the command line
via: kmemleak=on. Although a reboot is required to turn it on, its still
useful to not require a re-compile.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
lib/Kconfig.debug | 7 +++++++
mm/kmemleak.c | 14 +++++++++++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e722e9d62221d..95ab402db9c0c 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -400,6 +400,13 @@ config DEBUG_KMEMLEAK_TEST
If unsure, say N.
+config DEBUG_KMEMLEAK_DEFAULT_OFF
+ bool "Default kmemleak to off"
+ depends on DEBUG_KMEMLEAK
+ help
+ Say Y here to disable kmemleak by default. It can then be enabled
+ on the command line via kmemleak=on.
+
config DEBUG_PREEMPT
bool "Debug preemptible kernel"
depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index c2c9feb3097f8..d33e990e06681 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -211,6 +211,9 @@ static signed long jiffies_scan_wait;
static int kmemleak_stack_scan = 1;
/* protects the memory scanning, parameters and debug/kmemleak file access */
static DEFINE_MUTEX(scan_mutex);
+/* setting kmemleak=on, will set this var, skipping the disable */
+static int kmemleak_skip_disable;
+
/*
* Early object allocation/freeing logging. Kmemleak is initialized after the
@@ -1604,7 +1607,9 @@ static int kmemleak_boot_config(char *str)
return -EINVAL;
if (strcmp(str, "off") == 0)
kmemleak_disable();
- else if (strcmp(str, "on") != 0)
+ else if (strcmp(str, "on") == 0)
+ kmemleak_skip_disable = 1;
+ else
return -EINVAL;
return 0;
}
@@ -1618,6 +1623,13 @@ void __init kmemleak_init(void)
int i;
unsigned long flags;
+#ifdef CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF
+ if (!kmemleak_skip_disable) {
+ kmemleak_disable();
+ return;
+ }
+#endif
+
jiffies_min_age = msecs_to_jiffies(MSECS_MIN_AGE);
jiffies_scan_wait = msecs_to_jiffies(SECS_SCAN_WAIT * 1000);
--
GitLab
From a2b6bf63cb7a3e34bd2e753a6f2c2776b5c8496f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 19 Jul 2010 11:54:17 +0100
Subject: [PATCH 025/863] kmemleak: Add DocBook style comments to kmemleak.c
The description and parameters of the kmemleak API weren't obvious. This
patch adds comments clarifying the API usage.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
mm/kmemleak.c | 80 +++++++++++++++++++++++++++++++++++++--------------
1 file changed, 59 insertions(+), 21 deletions(-)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index d33e990e06681..5f2eb5b236583 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -843,10 +843,19 @@ static void early_alloc(struct early_log *log)
rcu_read_unlock();
}
-/*
- * Memory allocation function callback. This function is called from the
- * kernel allocators when a new block is allocated (kmem_cache_alloc, kmalloc,
- * vmalloc etc.).
+/**
+ * kmemleak_alloc - register a newly allocated object
+ * @ptr: pointer to beginning of the object
+ * @size: size of the object
+ * @min_count: minimum number of references to this object. If during memory
+ * scanning a number of references less than @min_count is found,
+ * the object is reported as a memory leak. If @min_count is 0,
+ * the object is never reported as a leak. If @min_count is -1,
+ * the object is ignored (not scanned and not reported as a leak)
+ * @gfp: kmalloc() flags used for kmemleak internal memory allocations
+ *
+ * This function is called from the kernel allocators when a new object
+ * (memory block) is allocated (kmem_cache_alloc, kmalloc, vmalloc etc.).
*/
void __ref kmemleak_alloc(const void *ptr, size_t size, int min_count,
gfp_t gfp)
@@ -860,9 +869,12 @@ void __ref kmemleak_alloc(const void *ptr, size_t size, int min_count,
}
EXPORT_SYMBOL_GPL(kmemleak_alloc);
-/*
- * Memory freeing function callback. This function is called from the kernel
- * allocators when a block is freed (kmem_cache_free, kfree, vfree etc.).
+/**
+ * kmemleak_free - unregister a previously registered object
+ * @ptr: pointer to beginning of the object
+ *
+ * This function is called from the kernel allocators when an object (memory
+ * block) is freed (kmem_cache_free, kfree, vfree etc.).
*/
void __ref kmemleak_free(const void *ptr)
{
@@ -875,9 +887,14 @@ void __ref kmemleak_free(const void *ptr)
}
EXPORT_SYMBOL_GPL(kmemleak_free);
-/*
- * Partial memory freeing function callback. This function is usually called
- * from bootmem allocator when (part of) a memory block is freed.
+/**
+ * kmemleak_free_part - partially unregister a previously registered object
+ * @ptr: pointer to the beginning or inside the object. This also
+ * represents the start of the range to be freed
+ * @size: size to be unregistered
+ *
+ * This function is called when only a part of a memory block is freed
+ * (usually from the bootmem allocator).
*/
void __ref kmemleak_free_part(const void *ptr, size_t size)
{
@@ -890,9 +907,12 @@ void __ref kmemleak_free_part(const void *ptr, size_t size)
}
EXPORT_SYMBOL_GPL(kmemleak_free_part);
-/*
- * Mark an already allocated memory block as a false positive. This will cause
- * the block to no longer be reported as leak and always be scanned.
+/**
+ * kmemleak_not_leak - mark an allocated object as false positive
+ * @ptr: pointer to beginning of the object
+ *
+ * Calling this function on an object will cause the memory block to no longer
+ * be reported as leak and always be scanned.
*/
void __ref kmemleak_not_leak(const void *ptr)
{
@@ -905,10 +925,14 @@ void __ref kmemleak_not_leak(const void *ptr)
}
EXPORT_SYMBOL(kmemleak_not_leak);
-/*
- * Ignore a memory block. This is usually done when it is known that the
- * corresponding block is not a leak and does not contain any references to
- * other allocated memory blocks.
+/**
+ * kmemleak_ignore - ignore an allocated object
+ * @ptr: pointer to beginning of the object
+ *
+ * Calling this function on an object will cause the memory block to be
+ * ignored (not scanned and not reported as a leak). This is usually done when
+ * it is known that the corresponding block is not a leak and does not contain
+ * any references to other allocated memory blocks.
*/
void __ref kmemleak_ignore(const void *ptr)
{
@@ -921,8 +945,16 @@ void __ref kmemleak_ignore(const void *ptr)
}
EXPORT_SYMBOL(kmemleak_ignore);
-/*
- * Limit the range to be scanned in an allocated memory block.
+/**
+ * kmemleak_scan_area - limit the range to be scanned in an allocated object
+ * @ptr: pointer to beginning or inside the object. This also
+ * represents the start of the scan area
+ * @size: size of the scan area
+ * @gfp: kmalloc() flags used for kmemleak internal memory allocations
+ *
+ * This function is used when it is known that only certain parts of an object
+ * contain references to other objects. Kmemleak will only scan these areas
+ * reducing the number false negatives.
*/
void __ref kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp)
{
@@ -935,8 +967,14 @@ void __ref kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp)
}
EXPORT_SYMBOL(kmemleak_scan_area);
-/*
- * Inform kmemleak not to scan the given memory block.
+/**
+ * kmemleak_no_scan - do not scan an allocated object
+ * @ptr: pointer to beginning of the object
+ *
+ * This function notifies kmemleak not to scan the given memory block. Useful
+ * in situations where it is known that the given object does not contain any
+ * references to other objects. Kmemleak will not scan such objects reducing
+ * the number of false negatives.
*/
void __ref kmemleak_no_scan(const void *ptr)
{
--
GitLab
From 00bcb4ac7ee7e557a491b614219142cea0ef16f4 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:23 +1000
Subject: [PATCH 026/863] md: reduce dependence on sysfs.
We will want md devices to live as dm targets where sysfs is not
visible. So allow md to not connect to sysfs.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 101 +++++++++++++++++++++------------------------
drivers/md/md.h | 12 ++++++
drivers/md/raid5.c | 8 ++--
3 files changed, 62 insertions(+), 59 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index cb20d0b0555ad..9007651ce1756 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -541,14 +541,16 @@ static void mddev_unlock(mddev_t * mddev)
mutex_lock(&mddev->open_mutex);
mutex_unlock(&mddev->reconfig_mutex);
- if (to_remove != &md_redundancy_group)
- sysfs_remove_group(&mddev->kobj, to_remove);
- if (mddev->pers == NULL ||
- mddev->pers->sync_request == NULL) {
- sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
- if (mddev->sysfs_action)
- sysfs_put(mddev->sysfs_action);
- mddev->sysfs_action = NULL;
+ if (mddev->kobj.sd) {
+ if (to_remove != &md_redundancy_group)
+ sysfs_remove_group(&mddev->kobj, to_remove);
+ if (mddev->pers == NULL ||
+ mddev->pers->sync_request == NULL) {
+ sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+ if (mddev->sysfs_action)
+ sysfs_put(mddev->sysfs_action);
+ mddev->sysfs_action = NULL;
+ }
}
mutex_unlock(&mddev->open_mutex);
} else
@@ -1811,11 +1813,9 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
goto fail;
ko = &part_to_dev(rdev->bdev->bd_part)->kobj;
- if ((err = sysfs_create_link(&rdev->kobj, ko, "block"))) {
- kobject_del(&rdev->kobj);
- goto fail;
- }
- rdev->sysfs_state = sysfs_get_dirent(rdev->kobj.sd, NULL, "state");
+ if (sysfs_create_link(&rdev->kobj, ko, "block"))
+ /* failure here is OK */;
+ rdev->sysfs_state = sysfs_get_dirent_safe(rdev->kobj.sd, "state");
list_add_rcu(&rdev->same_set, &mddev->disks);
bd_claim_by_disk(rdev->bdev, rdev->bdev->bd_holder, mddev->gendisk);
@@ -2334,8 +2334,8 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len)
set_bit(In_sync, &rdev->flags);
err = 0;
}
- if (!err && rdev->sysfs_state)
- sysfs_notify_dirent(rdev->sysfs_state);
+ if (!err)
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
return err ? err : len;
}
static struct rdev_sysfs_entry rdev_state =
@@ -2430,14 +2430,10 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len)
rdev->raid_disk = -1;
return err;
} else
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&rdev->mddev->kobj, &rdev->kobj, nm))
- printk(KERN_WARNING
- "md: cannot register "
- "%s for %s\n",
- nm, mdname(rdev->mddev));
-
+ /* failure here is OK */;
/* don't wakeup anyone, leave that to userspace. */
} else {
if (slot >= rdev->mddev->raid_disks)
@@ -2447,7 +2443,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len)
clear_bit(Faulty, &rdev->flags);
clear_bit(WriteMostly, &rdev->flags);
set_bit(In_sync, &rdev->flags);
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
}
return len;
}
@@ -3437,7 +3433,7 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len)
if (err)
return err;
else {
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
return len;
}
}
@@ -3735,7 +3731,7 @@ action_store(mddev_t *mddev, const char *page, size_t len)
}
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
return len;
}
@@ -4281,13 +4277,14 @@ static int md_alloc(dev_t dev, char *name)
disk->disk_name);
error = 0;
}
- if (sysfs_create_group(&mddev->kobj, &md_bitmap_group))
+ if (mddev->kobj.sd &&
+ sysfs_create_group(&mddev->kobj, &md_bitmap_group))
printk(KERN_DEBUG "pointless warning\n");
abort:
mutex_unlock(&disks_mutex);
- if (!error) {
+ if (!error && mddev->kobj.sd) {
kobject_uevent(&mddev->kobj, KOBJ_ADD);
- mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, NULL, "array_state");
+ mddev->sysfs_state = sysfs_get_dirent_safe(mddev->kobj.sd, "array_state");
}
mddev_put(mddev);
return error;
@@ -4325,7 +4322,7 @@ static void md_safemode_timeout(unsigned long data)
if (!atomic_read(&mddev->writes_pending)) {
mddev->safemode = 1;
if (mddev->external)
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
}
md_wakeup_thread(mddev->thread);
}
@@ -4397,7 +4394,7 @@ static int md_run(mddev_t *mddev)
return -EINVAL;
}
}
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
}
spin_lock(&pers_lock);
@@ -4496,11 +4493,12 @@ static int md_run(mddev_t *mddev)
return err;
}
if (mddev->pers->sync_request) {
- if (sysfs_create_group(&mddev->kobj, &md_redundancy_group))
+ if (mddev->kobj.sd &&
+ sysfs_create_group(&mddev->kobj, &md_redundancy_group))
printk(KERN_WARNING
"md: cannot register extra attributes for %s\n",
mdname(mddev));
- mddev->sysfs_action = sysfs_get_dirent(mddev->kobj.sd, NULL, "sync_action");
+ mddev->sysfs_action = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_action");
} else if (mddev->ro == 2) /* auto-readonly not meaningful */
mddev->ro = 0;
@@ -4518,8 +4516,7 @@ static int md_run(mddev_t *mddev)
char nm[20];
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj, &rdev->kobj, nm))
- printk("md: cannot register %s for %s\n",
- nm, mdname(mddev));
+ /* failure here is OK */;
}
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
@@ -4531,9 +4528,8 @@ static int md_run(mddev_t *mddev)
md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
md_new_event(mddev);
- sysfs_notify_dirent(mddev->sysfs_state);
- if (mddev->sysfs_action)
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
sysfs_notify(&mddev->kobj, NULL, "degraded");
return 0;
}
@@ -4573,7 +4569,7 @@ static int restart_array(mddev_t *mddev)
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread);
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
return 0;
}
@@ -4697,7 +4693,7 @@ static int md_set_readonly(mddev_t *mddev, int is_open)
mddev->ro = 1;
set_disk_ro(mddev->gendisk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
err = 0;
}
out:
@@ -4730,7 +4726,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
mddev->queue->backing_dev_info.congested_fn = NULL;
/* tell userspace to handle 'inactive' */
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0) {
@@ -4776,7 +4772,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
err = 0;
blk_integrity_unregister(disk);
md_new_event(mddev);
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
return err;
}
@@ -5138,7 +5134,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
if (err)
export_rdev(rdev);
else
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
md_update_sb(mddev, 1);
if (mddev->degraded)
@@ -5813,7 +5809,7 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
if (_IOC_TYPE(cmd) == MD_MAJOR && mddev->ro && mddev->pers) {
if (mddev->ro == 2) {
mddev->ro = 0;
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
} else {
@@ -6059,7 +6055,7 @@ void md_error(mddev_t *mddev, mdk_rdev_t *rdev)
mddev->pers->error_handler(mddev,rdev);
if (mddev->degraded)
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
@@ -6520,7 +6516,7 @@ void md_write_start(mddev_t *mddev, struct bio *bi)
spin_unlock_irq(&mddev->write_lock);
}
if (did_change)
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
wait_event(mddev->sb_wait,
!test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
!test_bit(MD_CHANGE_PENDING, &mddev->flags));
@@ -6563,7 +6559,7 @@ int md_allow_write(mddev_t *mddev)
mddev->safemode = 1;
spin_unlock_irq(&mddev->write_lock);
md_update_sb(mddev, 0);
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
} else
spin_unlock_irq(&mddev->write_lock);
@@ -6950,10 +6946,7 @@ static int remove_and_add_spares(mddev_t *mddev)
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
- printk(KERN_WARNING
- "md: cannot register "
- "%s for %s\n",
- nm, mdname(mddev));
+ /* failure here is OK */;
spares++;
md_new_event(mddev);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -7046,7 +7039,7 @@ void md_check_recovery(mddev_t *mddev)
mddev->safemode = 0;
spin_unlock_irq(&mddev->write_lock);
if (did_change)
- sysfs_notify_dirent(mddev->sysfs_state);
+ sysfs_notify_dirent_safe(mddev->sysfs_state);
}
if (mddev->flags)
@@ -7085,7 +7078,7 @@ void md_check_recovery(mddev_t *mddev)
mddev->recovery = 0;
/* flag recovery needed just to double check */
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
md_new_event(mddev);
goto unlock;
}
@@ -7147,7 +7140,7 @@ void md_check_recovery(mddev_t *mddev)
mddev->recovery = 0;
} else
md_wakeup_thread(mddev->sync_thread);
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
md_new_event(mddev);
}
unlock:
@@ -7156,7 +7149,7 @@ void md_check_recovery(mddev_t *mddev)
if (test_and_clear_bit(MD_RECOVERY_RECOVER,
&mddev->recovery))
if (mddev->sysfs_action)
- sysfs_notify_dirent(mddev->sysfs_action);
+ sysfs_notify_dirent_safe(mddev->sysfs_action);
}
mddev_unlock(mddev);
}
@@ -7164,7 +7157,7 @@ void md_check_recovery(mddev_t *mddev)
void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
{
- sysfs_notify_dirent(rdev->sysfs_state);
+ sysfs_notify_dirent_safe(rdev->sysfs_state);
wait_event_timeout(rdev->blocked_wait,
!test_bit(Blocked, &rdev->flags),
msecs_to_jiffies(5000));
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 10597bfec0001..1e6405918eec0 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -382,6 +382,18 @@ struct md_sysfs_entry {
};
extern struct attribute_group md_bitmap_group;
+static inline struct sysfs_dirent *sysfs_get_dirent_safe(struct sysfs_dirent *sd, char *name)
+{
+ if (sd)
+ return sysfs_get_dirent(sd, NULL, name);
+ return sd;
+}
+static inline void sysfs_notify_dirent_safe(struct sysfs_dirent *sd)
+{
+ if (sd)
+ sysfs_notify_dirent(sd);
+}
+
static inline char * mdname (mddev_t * mddev)
{
return mddev->gendisk ? mddev->gendisk->disk_name : "mdX";
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 96c690279fc6b..6a7a301131613 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5158,7 +5158,8 @@ static int run(mddev_t *mddev)
/* Ok, everything is just fine now */
if (mddev->to_remove == &raid5_attrs_group)
mddev->to_remove = NULL;
- else if (sysfs_create_group(&mddev->kobj, &raid5_attrs_group))
+ else if (mddev->kobj.sd &&
+ sysfs_create_group(&mddev->kobj, &raid5_attrs_group))
printk(KERN_WARNING
"md/raid:%s: failed to create sysfs attributes.\n",
mdname(mddev));
@@ -5545,10 +5546,7 @@ static int raid5_start_reshape(mddev_t *mddev)
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
- printk(KERN_WARNING
- "md/raid:%s: failed to create "
- " link %s\n",
- mdname(mddev), nm);
+ /* Failure here is OK */;
} else
break;
}
--
GitLab
From c41d4ac40df0d01bf9c383ff28f194d1df2d4fd9 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:24 +1000
Subject: [PATCH 027/863] md/raid5: factor out code for changing size of stripe
cache.
Separate the actual 'change' code from the sysfs interface
so that it can eventually be called internally.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid5.c | 39 ++++++++++++++++++++++++++-------------
drivers/md/raid5.h | 1 +
2 files changed, 27 insertions(+), 13 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6a7a301131613..bd4067a70834a 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4566,23 +4566,15 @@ raid5_show_stripe_cache_size(mddev_t *mddev, char *page)
return 0;
}
-static ssize_t
-raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
+int
+raid5_set_cache_size(mddev_t *mddev, int size)
{
raid5_conf_t *conf = mddev->private;
- unsigned long new;
int err;
- if (len >= PAGE_SIZE)
+ if (size <= 16 || size > 32768)
return -EINVAL;
- if (!conf)
- return -ENODEV;
-
- if (strict_strtoul(page, 10, &new))
- return -EINVAL;
- if (new <= 16 || new > 32768)
- return -EINVAL;
- while (new < conf->max_nr_stripes) {
+ while (size < conf->max_nr_stripes) {
if (drop_one_stripe(conf))
conf->max_nr_stripes--;
else
@@ -4591,11 +4583,32 @@ raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
err = md_allow_write(mddev);
if (err)
return err;
- while (new > conf->max_nr_stripes) {
+ while (size > conf->max_nr_stripes) {
if (grow_one_stripe(conf))
conf->max_nr_stripes++;
else break;
}
+ return 0;
+}
+EXPORT_SYMBOL(raid5_set_cache_size);
+
+static ssize_t
+raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
+{
+ raid5_conf_t *conf = mddev->private;
+ unsigned long new;
+ int err;
+
+ if (len >= PAGE_SIZE)
+ return -EINVAL;
+ if (!conf)
+ return -ENODEV;
+
+ if (strict_strtoul(page, 10, &new))
+ return -EINVAL;
+ err = raid5_set_cache_size(mddev, new);
+ if (err)
+ return err;
return len;
}
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 0f86f5e367245..cbdbc77695b3e 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -497,4 +497,5 @@ static inline int algorithm_is_DDF(int layout)
{
return layout >= 8 && layout <= 10;
}
+extern int raid5_set_cache_size(mddev_t *mddev, int size);
#endif
--
GitLab
From 29f367bfbf5a8de46cb7320647e44f20d18cff44 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sun, 4 Jul 2010 00:15:05 +0200
Subject: [PATCH 028/863] ia64/perfmon: Convert to unlocked_ioctl
The ioctl function in this driver does not
do anything that requires the BKL, so make
it use unlocked_ioctl.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
arch/ia64/kernel/perfmon.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index ab985f785c140..744329072f33b 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -1696,8 +1696,8 @@ pfm_poll(struct file *filp, poll_table * wait)
return mask;
}
-static int
-pfm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long
+pfm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
DPRINT(("pfm_ioctl called\n"));
return -EINVAL;
@@ -2174,15 +2174,15 @@ pfm_no_open(struct inode *irrelevant, struct file *dontcare)
static const struct file_operations pfm_file_ops = {
- .llseek = no_llseek,
- .read = pfm_read,
- .write = pfm_write,
- .poll = pfm_poll,
- .ioctl = pfm_ioctl,
- .open = pfm_no_open, /* special open code to disallow open via /proc */
- .fasync = pfm_fasync,
- .release = pfm_close,
- .flush = pfm_flush
+ .llseek = no_llseek,
+ .read = pfm_read,
+ .write = pfm_write,
+ .poll = pfm_poll,
+ .unlocked_ioctl = pfm_ioctl,
+ .open = pfm_no_open, /* special open code to disallow open via /proc */
+ .fasync = pfm_fasync,
+ .release = pfm_close,
+ .flush = pfm_flush
};
static int
--
GitLab
From f4be6b43f1ac60dff00ef0923ee43b0e08872947 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:25 +1000
Subject: [PATCH 029/863] md/raid5: ensure we create a unique name for
kmem_cache when mddev has no gendisk
We will shortly allow md devices with no gendisk (they are attached to
a dm-target instead). That will cause mdname() to return 'mdX'.
There is one place where mdname really needs to be unique: when
creating the name for a slab cache.
So in that case, if there is no gendisk, you the address of the mddev
formatted in HEX to provide a unique name.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid5.c | 12 ++++++++----
drivers/md/raid5.h | 2 +-
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index bd4067a70834a..6fa60e416a097 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1337,10 +1337,14 @@ static int grow_stripes(raid5_conf_t *conf, int num)
struct kmem_cache *sc;
int devs = max(conf->raid_disks, conf->previous_raid_disks);
- sprintf(conf->cache_name[0],
- "raid%d-%s", conf->level, mdname(conf->mddev));
- sprintf(conf->cache_name[1],
- "raid%d-%s-alt", conf->level, mdname(conf->mddev));
+ if (conf->mddev->gendisk)
+ sprintf(conf->cache_name[0],
+ "raid%d-%s", conf->level, mdname(conf->mddev));
+ else
+ sprintf(conf->cache_name[0],
+ "raid%d-%p", conf->level, conf->mddev);
+ sprintf(conf->cache_name[1], "%s-alt", conf->cache_name[0]);
+
conf->active_name = 0;
sc = kmem_cache_create(conf->cache_name[conf->active_name],
sizeof(struct stripe_head)+(devs-1)*sizeof(struct r5dev),
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index cbdbc77695b3e..61b6b25dc5e7c 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -388,7 +388,7 @@ struct raid5_private_data {
* two caches.
*/
int active_name;
- char cache_name[2][20];
+ char cache_name[2][32];
struct kmem_cache *slab_cache; /* for allocating stripes */
int seq_flush, seq_write;
--
GitLab
From 676e42d896ab6967859fabbb06f4e11b9615cbcf Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:26 +1000
Subject: [PATCH 030/863] md: be more careful setting MD_CHANGE_CLEAN
When MD_CHANGE_CLEAN is set we might block in md_write_start.
So we should only set it when fairly sure that something will clear
it.
There are two places where it is set so as to encourage a metadata
update to record the progress of resync/recovery. This should only
be done if the internal metadata update mechanisms are in use, which
can be tested by by inspecting '->persistent'.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/bitmap.c | 3 ++-
drivers/md/md.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 1742435ce3ae3..4518994712c7f 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1526,7 +1526,8 @@ void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector)
atomic_read(&bitmap->mddev->recovery_active) == 0);
bitmap->mddev->curr_resync_completed = bitmap->mddev->curr_resync;
- set_bit(MD_CHANGE_CLEAN, &bitmap->mddev->flags);
+ if (bitmap->mddev->persistent)
+ set_bit(MD_CHANGE_CLEAN, &bitmap->mddev->flags);
sector &= ~((1ULL << CHUNK_BLOCK_SHIFT(bitmap)) - 1);
s = 0;
while (s < sector && s < bitmap->mddev->resync_max_sectors) {
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9007651ce1756..d636b0a40fac0 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6753,7 +6753,8 @@ void md_do_sync(mddev_t *mddev)
atomic_read(&mddev->recovery_active) == 0);
mddev->curr_resync_completed =
mddev->curr_resync;
- set_bit(MD_CHANGE_CLEAN, &mddev->flags);
+ if (mddev->persistent)
+ set_bit(MD_CHANGE_CLEAN, &mddev->flags);
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
--
GitLab
From e8bb9a839a26f076379e9cb9f46a879d210156f1 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:26 +1000
Subject: [PATCH 031/863] md: split out md_rdev_init
This functionality will be needed separately in a subsequent patch, so
split it into it's own exported function.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 34 +++++++++++++++++++---------------
drivers/md/md.h | 1 +
2 files changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index d636b0a40fac0..3de623aceed04 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2691,6 +2691,24 @@ static struct kobj_type rdev_ktype = {
.default_attrs = rdev_default_attrs,
};
+void md_rdev_init(mdk_rdev_t *rdev)
+{
+ rdev->desc_nr = -1;
+ rdev->saved_raid_disk = -1;
+ rdev->raid_disk = -1;
+ rdev->flags = 0;
+ rdev->data_offset = 0;
+ rdev->sb_events = 0;
+ rdev->last_read_error.tv_sec = 0;
+ rdev->last_read_error.tv_nsec = 0;
+ atomic_set(&rdev->nr_pending, 0);
+ atomic_set(&rdev->read_errors, 0);
+ atomic_set(&rdev->corrected_errors, 0);
+
+ INIT_LIST_HEAD(&rdev->same_set);
+ init_waitqueue_head(&rdev->blocked_wait);
+}
+EXPORT_SYMBOL_GPL(md_rdev_init);
/*
* Import a device. If 'super_format' >= 0, then sanity check the superblock
*
@@ -2714,6 +2732,7 @@ static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_mi
return ERR_PTR(-ENOMEM);
}
+ md_rdev_init(rdev);
if ((err = alloc_disk_sb(rdev)))
goto abort_free;
@@ -2723,18 +2742,6 @@ static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_mi
kobject_init(&rdev->kobj, &rdev_ktype);
- rdev->desc_nr = -1;
- rdev->saved_raid_disk = -1;
- rdev->raid_disk = -1;
- rdev->flags = 0;
- rdev->data_offset = 0;
- rdev->sb_events = 0;
- rdev->last_read_error.tv_sec = 0;
- rdev->last_read_error.tv_nsec = 0;
- atomic_set(&rdev->nr_pending, 0);
- atomic_set(&rdev->read_errors, 0);
- atomic_set(&rdev->corrected_errors, 0);
-
size = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS;
if (!size) {
printk(KERN_WARNING
@@ -2763,9 +2770,6 @@ static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_mi
}
}
- INIT_LIST_HEAD(&rdev->same_set);
- init_waitqueue_head(&rdev->blocked_wait);
-
return rdev;
abort_free:
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 1e6405918eec0..cc8030543e825 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -487,4 +487,5 @@ extern void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern int strict_strtoul_scaled(const char *cp, unsigned long *res, int scale);
extern void restore_bitmap_write_access(struct file *file);
+extern void md_rdev_init(mdk_rdev_t *rdev);
#endif /* _MD_MD_H */
--
GitLab
From 390ee602a142a93f2c7eb7bffee8e277058b8e0a Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:27 +1000
Subject: [PATCH 032/863] md: export various start/stop interfaces
export entry points for starting and stopping md arrays.
This will be used by a module to make md/raid5 work under
dm.
Also stop calling md_stop_writes from md_stop, as that won't
work well with dm - it will want to call the two separately.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 21 +++++++++++++--------
drivers/md/md.h | 7 +++++++
2 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 3de623aceed04..012482a900fc1 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -261,7 +261,7 @@ static int md_make_request(struct request_queue *q, struct bio *bio)
* Once ->stop is called and completes, the module will be completely
* unused.
*/
-static void mddev_suspend(mddev_t *mddev)
+void mddev_suspend(mddev_t *mddev)
{
BUG_ON(mddev->suspended);
mddev->suspended = 1;
@@ -269,13 +269,15 @@ static void mddev_suspend(mddev_t *mddev)
wait_event(mddev->sb_wait, atomic_read(&mddev->active_io) == 0);
mddev->pers->quiesce(mddev, 1);
}
+EXPORT_SYMBOL_GPL(mddev_suspend);
-static void mddev_resume(mddev_t *mddev)
+void mddev_resume(mddev_t *mddev)
{
mddev->suspended = 0;
wake_up(&mddev->sb_wait);
mddev->pers->quiesce(mddev, 0);
}
+EXPORT_SYMBOL_GPL(mddev_resume);
int mddev_congested(mddev_t *mddev, int bits)
{
@@ -416,7 +418,7 @@ static void mddev_put(mddev_t *mddev)
spin_unlock(&all_mddevs_lock);
}
-static void mddev_init(mddev_t *mddev)
+void mddev_init(mddev_t *mddev)
{
mutex_init(&mddev->open_mutex);
mutex_init(&mddev->reconfig_mutex);
@@ -436,6 +438,7 @@ static void mddev_init(mddev_t *mddev)
mddev->resync_max = MaxSector;
mddev->level = LEVEL_NONE;
}
+EXPORT_SYMBOL_GPL(mddev_init);
static mddev_t * mddev_find(dev_t unit)
{
@@ -4333,7 +4336,7 @@ static void md_safemode_timeout(unsigned long data)
static int start_dirty_degraded;
-static int md_run(mddev_t *mddev)
+int md_run(mddev_t *mddev)
{
int err;
mdk_rdev_t *rdev;
@@ -4537,6 +4540,7 @@ static int md_run(mddev_t *mddev)
sysfs_notify(&mddev->kobj, NULL, "degraded");
return 0;
}
+EXPORT_SYMBOL_GPL(md_run);
static int do_md_run(mddev_t *mddev)
{
@@ -4646,7 +4650,7 @@ static void md_clean(mddev_t *mddev)
mddev->bitmap_info.max_write_behind = 0;
}
-static void md_stop_writes(mddev_t *mddev)
+void md_stop_writes(mddev_t *mddev)
{
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
@@ -4666,11 +4670,10 @@ static void md_stop_writes(mddev_t *mddev)
md_update_sb(mddev, 1);
}
}
+EXPORT_SYMBOL_GPL(md_stop_writes);
-static void md_stop(mddev_t *mddev)
+void md_stop(mddev_t *mddev)
{
- md_stop_writes(mddev);
-
mddev->pers->stop(mddev);
if (mddev->pers->sync_request && mddev->to_remove == NULL)
mddev->to_remove = &md_redundancy_group;
@@ -4678,6 +4681,7 @@ static void md_stop(mddev_t *mddev)
mddev->pers = NULL;
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
+EXPORT_SYMBOL_GPL(md_stop);
static int md_set_readonly(mddev_t *mddev, int is_open)
{
@@ -4724,6 +4728,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
if (mddev->ro)
set_disk_ro(disk, 0);
+ md_stop_writes(mddev);
md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index cc8030543e825..6e7e3495f6e4f 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -487,5 +487,12 @@ extern void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern int strict_strtoul_scaled(const char *cp, unsigned long *res, int scale);
extern void restore_bitmap_write_access(struct file *file);
+extern void mddev_init(mddev_t *mddev);
+extern int md_run(mddev_t *mddev);
+extern void md_stop(mddev_t *mddev);
+extern void md_stop_writes(mddev_t *mddev);
extern void md_rdev_init(mdk_rdev_t *rdev);
+
+extern void mddev_suspend(mddev_t *mddev);
+extern void mddev_resume(mddev_t *mddev);
#endif /* _MD_MD_H */
--
GitLab
From 768a418db102bb6aa6064e6090892b5c21ff1f9e Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Mon, 26 Jul 2010 11:49:55 +1000
Subject: [PATCH 033/863] md: add support for raising dm events.
dm uses scheduled work to raise events to user-space.
So allow md device to have work_structs and schedule them on an error.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 2 ++
drivers/md/md.h | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 012482a900fc1..f8775699e15ad 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6068,6 +6068,8 @@ void md_error(mddev_t *mddev, mdk_rdev_t *rdev)
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
+ if (mddev->event_work.func)
+ schedule_work(&mddev->event_work);
md_new_event_inintr(mddev);
}
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 6e7e3495f6e4f..c88b04745e854 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -318,6 +318,7 @@ struct mddev_s
struct bio *barrier;
atomic_t flush_pending;
struct work_struct barrier_work;
+ struct work_struct event_work; /* used by dm to report failure event */
};
--
GitLab
From 4a5add49951e698073011855d1a8a7306bc9308d Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:28 +1000
Subject: [PATCH 034/863] raid5: Don't set read-ahead when there is no queue
dm-raid456 does not provide a 'queue' for raid5 to use,
so we must make raid5 stop depending on the queue.
First: read_ahead
dm handles read-ahead adjustment fully in userspace, so
simply don't do any readahead adjustments if there is
no queue.
Also re-arrange code slightly so all the accesses to ->queue are
together.
Finally, move the blk_queue_merge_bvec function into the 'if' as
the ->split_io setting in dm-raid456 has the same effect.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid5.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6fa60e416a097..9c462f6659c3e 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5161,16 +5161,6 @@ static int run(mddev_t *mddev)
"reshape");
}
- /* read-ahead size must cover two whole stripes, which is
- * 2 * (datadisks) * chunksize where 'n' is the number of raid devices
- */
- {
- int data_disks = conf->previous_raid_disks - conf->max_degraded;
- int stripe = data_disks *
- ((mddev->chunk_sectors << 9) / PAGE_SIZE);
- if (mddev->queue->backing_dev_info.ra_pages < 2 * stripe)
- mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
- }
/* Ok, everything is just fine now */
if (mddev->to_remove == &raid5_attrs_group)
@@ -5178,8 +5168,23 @@ static int run(mddev_t *mddev)
else if (mddev->kobj.sd &&
sysfs_create_group(&mddev->kobj, &raid5_attrs_group))
printk(KERN_WARNING
- "md/raid:%s: failed to create sysfs attributes.\n",
+ "raid5: failed to create sysfs attributes for %s\n",
mdname(mddev));
+ md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
+
+ if (mddev->queue) {
+ /* read-ahead size must cover two whole stripes, which
+ * is 2 * (datadisks) * chunksize where 'n' is the
+ * number of raid devices
+ */
+ int data_disks = conf->previous_raid_disks - conf->max_degraded;
+ int stripe = data_disks *
+ ((mddev->chunk_sectors << 9) / PAGE_SIZE);
+ if (mddev->queue->backing_dev_info.ra_pages < 2 * stripe)
+ mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
+
+ blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
+ }
mddev->queue->queue_lock = &conf->device_lock;
@@ -5187,9 +5192,6 @@ static int run(mddev_t *mddev)
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
- md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
-
- blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
chunk_size = mddev->chunk_sectors << 9;
blk_queue_io_min(mddev->queue, chunk_size);
blk_queue_io_opt(mddev->queue, chunk_size *
@@ -5618,7 +5620,7 @@ static void end_reshape(raid5_conf_t *conf)
/* read-ahead size must cover two whole stripes, which is
* 2 * (datadisks) * chunksize where 'n' is the number of raid devices
*/
- {
+ if (conf->mddev->queue) {
int data_disks = conf->raid_disks - conf->max_degraded;
int stripe = data_disks * ((conf->chunk_sectors << 9)
/ PAGE_SIZE);
--
GitLab
From 11d8a6e3719519fbc0e2c9d61b6fa931b84bf813 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Mon, 26 Jul 2010 11:57:07 +1000
Subject: [PATCH 035/863] md/raid5: export is_congested test
the dm module will need this for dm-raid45.
Also only access ->queue->backing_dev_info->congested_fn
if ->queue actually exists. It won't in a dm target.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid5.c | 22 +++++++++++++++-------
drivers/md/raid5.h | 2 ++
2 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 9c462f6659c3e..ad6694f8a3a88 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3678,17 +3678,14 @@ static void raid5_unplug_device(struct request_queue *q)
unplug_slaves(mddev);
}
-static int raid5_congested(void *data, int bits)
+int md_raid5_congested(mddev_t *mddev, int bits)
{
- mddev_t *mddev = data;
raid5_conf_t *conf = mddev->private;
/* No difference between reads and writes. Just check
* how busy the stripe_cache is
*/
- if (mddev_congested(mddev, bits))
- return 1;
if (conf->inactive_blocked)
return 1;
if (conf->quiesce)
@@ -3698,6 +3695,15 @@ static int raid5_congested(void *data, int bits)
return 0;
}
+EXPORT_SYMBOL_GPL(md_raid5_congested);
+
+static int raid5_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+
+ return mddev_congested(mddev, bits) ||
+ md_raid5_congested(mddev, bits);
+}
/* We want read requests to align with chunks where possible,
* but write requests don't need to.
@@ -5184,13 +5190,14 @@ static int run(mddev_t *mddev)
mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
+
+ mddev->queue->backing_dev_info.congested_data = mddev;
+ mddev->queue->backing_dev_info.congested_fn = raid5_congested;
}
mddev->queue->queue_lock = &conf->device_lock;
mddev->queue->unplug_fn = raid5_unplug_device;
- mddev->queue->backing_dev_info.congested_data = mddev;
- mddev->queue->backing_dev_info.congested_fn = raid5_congested;
chunk_size = mddev->chunk_sectors << 9;
blk_queue_io_min(mddev->queue, chunk_size);
@@ -5220,7 +5227,8 @@ static int stop(mddev_t *mddev)
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
- mddev->queue->backing_dev_info.congested_fn = NULL;
+ if (mddev->queue)
+ mddev->queue->backing_dev_info.congested_fn = NULL;
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
free_conf(conf);
mddev->private = NULL;
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 61b6b25dc5e7c..d6470dec667ac 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -497,5 +497,7 @@ static inline int algorithm_is_DDF(int layout)
{
return layout >= 8 && layout <= 10;
}
+
+extern int md_raid5_congested(mddev_t *mddev, int bits);
extern int raid5_set_cache_size(mddev_t *mddev, int size);
#endif
--
GitLab
From 2ac8740151b082f045e58010eb92560c3a23a0e9 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:29 +1000
Subject: [PATCH 036/863] md/raid5: add simple plugging infrastructure.
md/raid5 uses the plugging infrastructure provided by the block layer
and 'struct request_queue'. However when we plug raid5 under dm there
is no request queue so we cannot use that.
So create a similar infrastructure that is much lighter weight and use
it for raid5.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
drivers/md/md.h | 20 ++++++++++++++++++++
drivers/md/raid5.c | 39 +++++++++++++++++++++++++--------------
drivers/md/raid5.h | 3 +++
4 files changed, 93 insertions(+), 14 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index f8775699e15ad..eec75f1307089 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -386,6 +386,51 @@ void md_barrier_request(mddev_t *mddev, struct bio *bio)
}
EXPORT_SYMBOL(md_barrier_request);
+/* Support for plugging.
+ * This mirrors the plugging support in request_queue, but does not
+ * require having a whole queue
+ */
+static void plugger_work(struct work_struct *work)
+{
+ struct plug_handle *plug =
+ container_of(work, struct plug_handle, unplug_work);
+ plug->unplug_fn(plug);
+}
+static void plugger_timeout(unsigned long data)
+{
+ struct plug_handle *plug = (void *)data;
+ kblockd_schedule_work(NULL, &plug->unplug_work);
+}
+void plugger_init(struct plug_handle *plug,
+ void (*unplug_fn)(struct plug_handle *))
+{
+ plug->unplug_flag = 0;
+ plug->unplug_fn = unplug_fn;
+ init_timer(&plug->unplug_timer);
+ plug->unplug_timer.function = plugger_timeout;
+ plug->unplug_timer.data = (unsigned long)plug;
+ INIT_WORK(&plug->unplug_work, plugger_work);
+}
+EXPORT_SYMBOL_GPL(plugger_init);
+
+void plugger_set_plug(struct plug_handle *plug)
+{
+ if (!test_and_set_bit(PLUGGED_FLAG, &plug->unplug_flag))
+ mod_timer(&plug->unplug_timer, jiffies + msecs_to_jiffies(3)+1);
+}
+EXPORT_SYMBOL_GPL(plugger_set_plug);
+
+int plugger_remove_plug(struct plug_handle *plug)
+{
+ if (test_and_clear_bit(PLUGGED_FLAG, &plug->unplug_flag)) {
+ del_timer(&plug->unplug_timer);
+ return 1;
+ } else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plugger_remove_plug);
+
+
static inline mddev_t *mddev_get(mddev_t *mddev)
{
atomic_inc(&mddev->active);
diff --git a/drivers/md/md.h b/drivers/md/md.h
index c88b04745e854..5be0d6921b9dc 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -29,6 +29,26 @@
typedef struct mddev_s mddev_t;
typedef struct mdk_rdev_s mdk_rdev_t;
+/* generic plugging support - like that provided with request_queue,
+ * but does not require a request_queue
+ */
+struct plug_handle {
+ void (*unplug_fn)(struct plug_handle *);
+ struct timer_list unplug_timer;
+ struct work_struct unplug_work;
+ unsigned long unplug_flag;
+};
+#define PLUGGED_FLAG 1
+void plugger_init(struct plug_handle *plug,
+ void (*unplug_fn)(struct plug_handle *));
+void plugger_set_plug(struct plug_handle *plug);
+int plugger_remove_plug(struct plug_handle *plug);
+static inline void plugger_flush(struct plug_handle *plug)
+{
+ del_timer_sync(&plug->unplug_timer);
+ cancel_work_sync(&plug->unplug_work);
+}
+
/*
* MD's 'extended' device
*/
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index ad6694f8a3a88..84bb9aec22116 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -201,11 +201,11 @@ static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
if (test_bit(STRIPE_HANDLE, &sh->state)) {
if (test_bit(STRIPE_DELAYED, &sh->state)) {
list_add_tail(&sh->lru, &conf->delayed_list);
- blk_plug_device(conf->mddev->queue);
+ plugger_set_plug(&conf->plug);
} else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
sh->bm_seq - conf->seq_write > 0) {
list_add_tail(&sh->lru, &conf->bitmap_list);
- blk_plug_device(conf->mddev->queue);
+ plugger_set_plug(&conf->plug);
} else {
clear_bit(STRIPE_BIT_DELAY, &sh->state);
list_add_tail(&sh->lru, &conf->handle_list);
@@ -434,7 +434,7 @@ static int has_failed(raid5_conf_t *conf)
}
static void unplug_slaves(mddev_t *mddev);
-static void raid5_unplug_device(struct request_queue *q);
+static void raid5_unplug_device(raid5_conf_t *conf);
static struct stripe_head *
get_active_stripe(raid5_conf_t *conf, sector_t sector,
@@ -464,7 +464,7 @@ get_active_stripe(raid5_conf_t *conf, sector_t sector,
< (conf->max_nr_stripes *3/4)
|| !conf->inactive_blocked),
conf->device_lock,
- raid5_unplug_device(conf->mddev->queue)
+ raid5_unplug_device(conf)
);
conf->inactive_blocked = 0;
} else
@@ -3618,7 +3618,7 @@ static void raid5_activate_delayed(raid5_conf_t *conf)
list_add_tail(&sh->lru, &conf->hold_list);
}
} else
- blk_plug_device(conf->mddev->queue);
+ plugger_set_plug(&conf->plug);
}
static void activate_bit_delay(raid5_conf_t *conf)
@@ -3659,23 +3659,33 @@ static void unplug_slaves(mddev_t *mddev)
rcu_read_unlock();
}
-static void raid5_unplug_device(struct request_queue *q)
+static void raid5_unplug_device(raid5_conf_t *conf)
{
- mddev_t *mddev = q->queuedata;
- raid5_conf_t *conf = mddev->private;
unsigned long flags;
spin_lock_irqsave(&conf->device_lock, flags);
- if (blk_remove_plug(q)) {
+ if (plugger_remove_plug(&conf->plug)) {
conf->seq_flush++;
raid5_activate_delayed(conf);
}
- md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(conf->mddev->thread);
spin_unlock_irqrestore(&conf->device_lock, flags);
- unplug_slaves(mddev);
+ unplug_slaves(conf->mddev);
+}
+
+static void raid5_unplug(struct plug_handle *plug)
+{
+ raid5_conf_t *conf = container_of(plug, raid5_conf_t, plug);
+ raid5_unplug_device(conf);
+}
+
+static void raid5_unplug_queue(struct request_queue *q)
+{
+ mddev_t *mddev = q->queuedata;
+ raid5_unplug_device(mddev->private);
}
int md_raid5_congested(mddev_t *mddev, int bits)
@@ -4085,7 +4095,7 @@ static int make_request(mddev_t *mddev, struct bio * bi)
* add failed due to overlap. Flush everything
* and wait a while
*/
- raid5_unplug_device(mddev->queue);
+ raid5_unplug_device(conf);
release_stripe(sh);
schedule();
goto retry;
@@ -5178,6 +5188,7 @@ static int run(mddev_t *mddev)
mdname(mddev));
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
+ plugger_init(&conf->plug, raid5_unplug);
if (mddev->queue) {
/* read-ahead size must cover two whole stripes, which
* is 2 * (datadisks) * chunksize where 'n' is the
@@ -5197,7 +5208,7 @@ static int run(mddev_t *mddev)
mddev->queue->queue_lock = &conf->device_lock;
- mddev->queue->unplug_fn = raid5_unplug_device;
+ mddev->queue->unplug_fn = raid5_unplug_queue;
chunk_size = mddev->chunk_sectors << 9;
blk_queue_io_min(mddev->queue, chunk_size);
@@ -5229,7 +5240,7 @@ static int stop(mddev_t *mddev)
mddev->thread = NULL;
if (mddev->queue)
mddev->queue->backing_dev_info.congested_fn = NULL;
- blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
+ plugger_flush(&conf->plug); /* the unplug fn references 'conf'*/
free_conf(conf);
mddev->private = NULL;
mddev->to_remove = &raid5_attrs_group;
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index d6470dec667ac..6acd458f239d0 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -398,6 +398,9 @@ struct raid5_private_data {
* (fresh device added).
* Cleared when a sync completes.
*/
+
+ struct plug_handle plug;
+
/* per cpu variables */
struct raid5_percpu {
struct page *spare_page; /* Used when checking P/Q in raid6 */
--
GitLab
From 252ac5221a71be72b7e7c7b7482af91e9c962e8c Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:29 +1000
Subject: [PATCH 037/863] md/plug: optionally use plugger to unplug an array
during resync/recovery.
If an array doesn't have a 'queue' then md_do_sync cannot
unplug it.
In that case it will have a 'plugger', so make that available
to the mddev, and use it to unplug the array if needed.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 15 ++++++++++++---
drivers/md/md.h | 2 ++
drivers/md/raid5.c | 1 +
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index eec75f1307089..03c64e9735fb2 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4693,6 +4693,7 @@ static void md_clean(mddev_t *mddev)
mddev->bitmap_info.chunksize = 0;
mddev->bitmap_info.daemon_sleep = 0;
mddev->bitmap_info.max_write_behind = 0;
+ mddev->plug = NULL;
}
void md_stop_writes(mddev_t *mddev)
@@ -6626,6 +6627,14 @@ int md_allow_write(mddev_t *mddev)
}
EXPORT_SYMBOL_GPL(md_allow_write);
+static void md_unplug(mddev_t *mddev)
+{
+ if (mddev->queue)
+ blk_unplug(mddev->queue);
+ if (mddev->plug)
+ mddev->plug->unplug_fn(mddev->plug);
+}
+
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
void md_do_sync(mddev_t *mddev)
@@ -6804,7 +6813,7 @@ void md_do_sync(mddev_t *mddev)
>= mddev->resync_max - mddev->curr_resync_completed
)) {
/* time to update curr_resync_completed */
- blk_unplug(mddev->queue);
+ md_unplug(mddev);
wait_event(mddev->recovery_wait,
atomic_read(&mddev->recovery_active) == 0);
mddev->curr_resync_completed =
@@ -6882,7 +6891,7 @@ void md_do_sync(mddev_t *mddev)
* about not overloading the IO subsystem. (things like an
* e2fsck being done on the RAID array should execute fast)
*/
- blk_unplug(mddev->queue);
+ md_unplug(mddev);
cond_resched();
currspeed = ((unsigned long)(io_sectors-mddev->resync_mark_cnt))/2
@@ -6901,7 +6910,7 @@ void md_do_sync(mddev_t *mddev)
* this also signals 'finished resyncing' to md_stop
*/
out:
- blk_unplug(mddev->queue);
+ md_unplug(mddev);
wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 5be0d6921b9dc..57eb864a8249f 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -328,6 +328,8 @@ struct mddev_s
struct list_head all_mddevs;
struct attribute_group *to_remove;
+ struct plug_handle *plug; /* if used by personality */
+
/* Generic barrier handling.
* If there is a pending barrier request, all other
* writes are blocked while the devices are flushed.
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 84bb9aec22116..0a8173e650bb1 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5189,6 +5189,7 @@ static int run(mddev_t *mddev)
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
plugger_init(&conf->plug, raid5_unplug);
+ mddev->plug = &conf->plug;
if (mddev->queue) {
/* read-ahead size must cover two whole stripes, which
* is 2 * (datadisks) * chunksize where 'n' is the
--
GitLab
From 9f7c2220017771253d7d10b3cc017cb79eeac0fb Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Mon, 26 Jul 2010 12:04:13 +1000
Subject: [PATCH 038/863] md/raid5: export raid5 unplugging interface.
Also remove remaining accesses to ->queue and ->gendisk when ->queue
is NULL (As it is in a DM target).
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid5.c | 37 ++++++++++++++++++-------------------
drivers/md/raid5.h | 1 +
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 0a8173e650bb1..e30a809cbea0f 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -434,7 +434,6 @@ static int has_failed(raid5_conf_t *conf)
}
static void unplug_slaves(mddev_t *mddev);
-static void raid5_unplug_device(raid5_conf_t *conf);
static struct stripe_head *
get_active_stripe(raid5_conf_t *conf, sector_t sector,
@@ -464,7 +463,7 @@ get_active_stripe(raid5_conf_t *conf, sector_t sector,
< (conf->max_nr_stripes *3/4)
|| !conf->inactive_blocked),
conf->device_lock,
- raid5_unplug_device(conf)
+ md_raid5_unplug_device(conf)
);
conf->inactive_blocked = 0;
} else
@@ -3659,7 +3658,7 @@ static void unplug_slaves(mddev_t *mddev)
rcu_read_unlock();
}
-static void raid5_unplug_device(raid5_conf_t *conf)
+void md_raid5_unplug_device(raid5_conf_t *conf)
{
unsigned long flags;
@@ -3675,17 +3674,18 @@ static void raid5_unplug_device(raid5_conf_t *conf)
unplug_slaves(conf->mddev);
}
+EXPORT_SYMBOL_GPL(md_raid5_unplug_device);
static void raid5_unplug(struct plug_handle *plug)
{
raid5_conf_t *conf = container_of(plug, raid5_conf_t, plug);
- raid5_unplug_device(conf);
+ md_raid5_unplug_device(conf);
}
static void raid5_unplug_queue(struct request_queue *q)
{
mddev_t *mddev = q->queuedata;
- raid5_unplug_device(mddev->private);
+ md_raid5_unplug_device(mddev->private);
}
int md_raid5_congested(mddev_t *mddev, int bits)
@@ -4095,7 +4095,7 @@ static int make_request(mddev_t *mddev, struct bio * bi)
* add failed due to overlap. Flush everything
* and wait a while
*/
- raid5_unplug_device(conf);
+ md_raid5_unplug_device(conf);
release_stripe(sh);
schedule();
goto retry;
@@ -4991,7 +4991,7 @@ static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded
static int run(mddev_t *mddev)
{
raid5_conf_t *conf;
- int working_disks = 0, chunk_size;
+ int working_disks = 0;
int dirty_parity_disks = 0;
mdk_rdev_t *rdev;
sector_t reshape_offset = 0;
@@ -5191,6 +5191,7 @@ static int run(mddev_t *mddev)
plugger_init(&conf->plug, raid5_unplug);
mddev->plug = &conf->plug;
if (mddev->queue) {
+ int chunk_size;
/* read-ahead size must cover two whole stripes, which
* is 2 * (datadisks) * chunksize where 'n' is the
* number of raid devices
@@ -5205,20 +5206,18 @@ static int run(mddev_t *mddev)
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
- }
-
- mddev->queue->queue_lock = &conf->device_lock;
-
- mddev->queue->unplug_fn = raid5_unplug_queue;
+ mddev->queue->queue_lock = &conf->device_lock;
+ mddev->queue->unplug_fn = raid5_unplug_queue;
- chunk_size = mddev->chunk_sectors << 9;
- blk_queue_io_min(mddev->queue, chunk_size);
- blk_queue_io_opt(mddev->queue, chunk_size *
- (conf->raid_disks - conf->max_degraded));
+ chunk_size = mddev->chunk_sectors << 9;
+ blk_queue_io_min(mddev->queue, chunk_size);
+ blk_queue_io_opt(mddev->queue, chunk_size *
+ (conf->raid_disks - conf->max_degraded));
- list_for_each_entry(rdev, &mddev->disks, same_set)
- disk_stack_limits(mddev->gendisk, rdev->bdev,
- rdev->data_offset << 9);
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
+ }
return 0;
abort:
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 6acd458f239d0..36eaed5dfd6ef 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -502,5 +502,6 @@ static inline int algorithm_is_DDF(int layout)
}
extern int md_raid5_congested(mddev_t *mddev, int bits);
+extern void md_raid5_unplug_device(raid5_conf_t *conf);
extern int raid5_set_cache_size(mddev_t *mddev, int size);
#endif
--
GitLab
From ac2f40be46ce6ab3bec4c8c297d6923f941741ce Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:31 +1000
Subject: [PATCH 039/863] md/bitmap: white space clean up and similar.
Fixes some whitespace problems
Fixed some checkpatch.pl complaints.
Replaced kmalloc ... memset(0), with kzalloc
Fixed an unlikely memory leak on an error path.
Reformatted a number of 'if/else' sets, sometimes
replacing goto with an else clause.
Removed some old comments and commented-out code.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/bitmap.c | 301 ++++++++++++++++++++------------------------
drivers/md/md.h | 2 +-
2 files changed, 136 insertions(+), 167 deletions(-)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 4518994712c7f..67fb32d1124db 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -13,7 +13,6 @@
* Still to do:
*
* flush after percent set rather than just time based. (maybe both).
- * wait if count gets too high, wake when it drops to half.
*/
#include <linux/blkdev.h>
@@ -51,9 +50,6 @@
#define INJECT_FATAL_FAULT_3 0 /* undef */
#endif
-//#define DPRINTK PRINTK /* set this NULL to avoid verbose debug output */
-#define DPRINTK(x...) do { } while(0)
-
#ifndef PRINTK
# if DEBUG > 0
# define PRINTK(x...) printk(KERN_DEBUG x)
@@ -62,12 +58,11 @@
# endif
#endif
-static inline char * bmname(struct bitmap *bitmap)
+static inline char *bmname(struct bitmap *bitmap)
{
return bitmap->mddev ? mdname(bitmap->mddev) : "mdX";
}
-
/*
* just a placeholder - calls kmalloc for bitmap pages
*/
@@ -78,7 +73,7 @@ static unsigned char *bitmap_alloc_page(struct bitmap *bitmap)
#ifdef INJECT_FAULTS_1
page = NULL;
#else
- page = kmalloc(PAGE_SIZE, GFP_NOIO);
+ page = kzalloc(PAGE_SIZE, GFP_NOIO);
#endif
if (!page)
printk("%s: bitmap_alloc_page FAILED\n", bmname(bitmap));
@@ -107,7 +102,8 @@ static void bitmap_free_page(struct bitmap *bitmap, unsigned char *page)
* if we find our page, we increment the page's refcount so that it stays
* allocated while we're using it
*/
-static int bitmap_checkpage(struct bitmap *bitmap, unsigned long page, int create)
+static int bitmap_checkpage(struct bitmap *bitmap,
+ unsigned long page, int create)
__releases(bitmap->lock)
__acquires(bitmap->lock)
{
@@ -121,7 +117,6 @@ __acquires(bitmap->lock)
return -EINVAL;
}
-
if (bitmap->bp[page].hijacked) /* it's hijacked, don't try to alloc */
return 0;
@@ -131,43 +126,34 @@ __acquires(bitmap->lock)
if (!create)
return -ENOENT;
- spin_unlock_irq(&bitmap->lock);
-
/* this page has not been allocated yet */
- if ((mappage = bitmap_alloc_page(bitmap)) == NULL) {
+ spin_unlock_irq(&bitmap->lock);
+ mappage = bitmap_alloc_page(bitmap);
+ spin_lock_irq(&bitmap->lock);
+
+ if (mappage == NULL) {
PRINTK("%s: bitmap map page allocation failed, hijacking\n",
bmname(bitmap));
/* failed - set the hijacked flag so that we can use the
* pointer as a counter */
- spin_lock_irq(&bitmap->lock);
if (!bitmap->bp[page].map)
bitmap->bp[page].hijacked = 1;
- goto out;
- }
-
- /* got a page */
-
- spin_lock_irq(&bitmap->lock);
-
- /* recheck the page */
-
- if (bitmap->bp[page].map || bitmap->bp[page].hijacked) {
+ } else if (bitmap->bp[page].map ||
+ bitmap->bp[page].hijacked) {
/* somebody beat us to getting the page */
bitmap_free_page(bitmap, mappage);
return 0;
- }
+ } else {
- /* no page was in place and we have one, so install it */
+ /* no page was in place and we have one, so install it */
- memset(mappage, 0, PAGE_SIZE);
- bitmap->bp[page].map = mappage;
- bitmap->missing_pages--;
-out:
+ bitmap->bp[page].map = mappage;
+ bitmap->missing_pages--;
+ }
return 0;
}
-
/* if page is completely empty, put it back on the free list, or dealloc it */
/* if page was hijacked, unmark the flag so it might get alloced next time */
/* Note: lock should be held when calling this */
@@ -183,26 +169,15 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page)
if (bitmap->bp[page].hijacked) { /* page was hijacked, undo this now */
bitmap->bp[page].hijacked = 0;
bitmap->bp[page].map = NULL;
- return;
+ } else {
+ /* normal case, free the page */
+ ptr = bitmap->bp[page].map;
+ bitmap->bp[page].map = NULL;
+ bitmap->missing_pages++;
+ bitmap_free_page(bitmap, ptr);
}
-
- /* normal case, free the page */
-
-#if 0
-/* actually ... let's not. We will probably need the page again exactly when
- * memory is tight and we are flusing to disk
- */
- return;
-#else
- ptr = bitmap->bp[page].map;
- bitmap->bp[page].map = NULL;
- bitmap->missing_pages++;
- bitmap_free_page(bitmap, ptr);
- return;
-#endif
}
-
/*
* bitmap file handling - read and write the bitmap file and its superblock
*/
@@ -220,11 +195,14 @@ static struct page *read_sb_page(mddev_t *mddev, loff_t offset,
mdk_rdev_t *rdev;
sector_t target;
+ int did_alloc = 0;
- if (!page)
+ if (!page) {
page = alloc_page(GFP_KERNEL);
- if (!page)
- return ERR_PTR(-ENOMEM);
+ if (!page)
+ return ERR_PTR(-ENOMEM);
+ did_alloc = 1;
+ }
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (! test_bit(In_sync, &rdev->flags)
@@ -242,6 +220,8 @@ static struct page *read_sb_page(mddev_t *mddev, loff_t offset,
return page;
}
}
+ if (did_alloc)
+ put_page(page);
return ERR_PTR(-EIO);
}
@@ -286,49 +266,51 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
mddev_t *mddev = bitmap->mddev;
while ((rdev = next_active_rdev(rdev, mddev)) != NULL) {
- int size = PAGE_SIZE;
- loff_t offset = mddev->bitmap_info.offset;
- if (page->index == bitmap->file_pages-1)
- size = roundup(bitmap->last_page_size,
- bdev_logical_block_size(rdev->bdev));
- /* Just make sure we aren't corrupting data or
- * metadata
- */
- if (mddev->external) {
- /* Bitmap could be anywhere. */
- if (rdev->sb_start + offset + (page->index *(PAGE_SIZE/512)) >
- rdev->data_offset &&
- rdev->sb_start + offset <
- rdev->data_offset + mddev->dev_sectors +
- (PAGE_SIZE/512))
- goto bad_alignment;
- } else if (offset < 0) {
- /* DATA BITMAP METADATA */
- if (offset
- + (long)(page->index * (PAGE_SIZE/512))
- + size/512 > 0)
- /* bitmap runs in to metadata */
- goto bad_alignment;
- if (rdev->data_offset + mddev->dev_sectors
- > rdev->sb_start + offset)
- /* data runs in to bitmap */
- goto bad_alignment;
- } else if (rdev->sb_start < rdev->data_offset) {
- /* METADATA BITMAP DATA */
- if (rdev->sb_start
- + offset
- + page->index*(PAGE_SIZE/512) + size/512
- > rdev->data_offset)
- /* bitmap runs in to data */
- goto bad_alignment;
- } else {
- /* DATA METADATA BITMAP - no problems */
- }
- md_super_write(mddev, rdev,
- rdev->sb_start + offset
- + page->index * (PAGE_SIZE/512),
- size,
- page);
+ int size = PAGE_SIZE;
+ loff_t offset = mddev->bitmap_info.offset;
+ if (page->index == bitmap->file_pages-1)
+ size = roundup(bitmap->last_page_size,
+ bdev_logical_block_size(rdev->bdev));
+ /* Just make sure we aren't corrupting data or
+ * metadata
+ */
+ if (mddev->external) {
+ /* Bitmap could be anywhere. */
+ if (rdev->sb_start + offset + (page->index
+ * (PAGE_SIZE/512))
+ > rdev->data_offset
+ &&
+ rdev->sb_start + offset
+ < (rdev->data_offset + mddev->dev_sectors
+ + (PAGE_SIZE/512)))
+ goto bad_alignment;
+ } else if (offset < 0) {
+ /* DATA BITMAP METADATA */
+ if (offset
+ + (long)(page->index * (PAGE_SIZE/512))
+ + size/512 > 0)
+ /* bitmap runs in to metadata */
+ goto bad_alignment;
+ if (rdev->data_offset + mddev->dev_sectors
+ > rdev->sb_start + offset)
+ /* data runs in to bitmap */
+ goto bad_alignment;
+ } else if (rdev->sb_start < rdev->data_offset) {
+ /* METADATA BITMAP DATA */
+ if (rdev->sb_start
+ + offset
+ + page->index*(PAGE_SIZE/512) + size/512
+ > rdev->data_offset)
+ /* bitmap runs in to data */
+ goto bad_alignment;
+ } else {
+ /* DATA METADATA BITMAP - no problems */
+ }
+ md_super_write(mddev, rdev,
+ rdev->sb_start + offset
+ + page->index * (PAGE_SIZE/512),
+ size,
+ page);
}
if (wait)
@@ -364,10 +346,9 @@ static void write_page(struct bitmap *bitmap, struct page *page, int wait)
bh = bh->b_this_page;
}
- if (wait) {
+ if (wait)
wait_event(bitmap->write_wait,
atomic_read(&bitmap->pending_writes)==0);
- }
}
if (bitmap->flags & BITMAP_WRITE_ERROR)
bitmap_file_kick(bitmap);
@@ -424,7 +405,7 @@ static struct page *read_page(struct file *file, unsigned long index,
struct buffer_head *bh;
sector_t block;
- PRINTK("read bitmap file (%dB @ %Lu)\n", (int)PAGE_SIZE,
+ PRINTK("read bitmap file (%dB @ %llu)\n", (int)PAGE_SIZE,
(unsigned long long)index << PAGE_SHIFT);
page = alloc_page(GFP_KERNEL);
@@ -478,7 +459,7 @@ static struct page *read_page(struct file *file, unsigned long index,
}
out:
if (IS_ERR(page))
- printk(KERN_ALERT "md: bitmap read error: (%dB @ %Lu): %ld\n",
+ printk(KERN_ALERT "md: bitmap read error: (%dB @ %llu): %ld\n",
(int)PAGE_SIZE,
(unsigned long long)index << PAGE_SHIFT,
PTR_ERR(page));
@@ -664,11 +645,14 @@ static int bitmap_mask_state(struct bitmap *bitmap, enum bitmap_state bits,
sb = kmap_atomic(bitmap->sb_page, KM_USER0);
old = le32_to_cpu(sb->state) & bits;
switch (op) {
- case MASK_SET: sb->state |= cpu_to_le32(bits);
- break;
- case MASK_UNSET: sb->state &= cpu_to_le32(~bits);
- break;
- default: BUG();
+ case MASK_SET:
+ sb->state |= cpu_to_le32(bits);
+ break;
+ case MASK_UNSET:
+ sb->state &= cpu_to_le32(~bits);
+ break;
+ default:
+ BUG();
}
kunmap_atomic(sb, KM_USER0);
return old;
@@ -710,12 +694,12 @@ static inline unsigned long file_page_offset(struct bitmap *bitmap, unsigned lon
static inline struct page *filemap_get_page(struct bitmap *bitmap,
unsigned long chunk)
{
- if (file_page_index(bitmap, chunk) >= bitmap->file_pages) return NULL;
+ if (file_page_index(bitmap, chunk) >= bitmap->file_pages)
+ return NULL;
return bitmap->filemap[file_page_index(bitmap, chunk)
- file_page_index(bitmap, 0)];
}
-
static void bitmap_file_unmap(struct bitmap *bitmap)
{
struct page **map, *sb_page;
@@ -766,7 +750,6 @@ static void bitmap_file_put(struct bitmap *bitmap)
}
}
-
/*
* bitmap_file_kick - if an error occurs while manipulating the bitmap file
* then it is no longer reliable, so we stop using it and we mark the file
@@ -785,7 +768,6 @@ static void bitmap_file_kick(struct bitmap *bitmap)
ptr = d_path(&bitmap->file->f_path, path,
PAGE_SIZE);
-
printk(KERN_ALERT
"%s: kicking failed bitmap file %s from array!\n",
bmname(bitmap), IS_ERR(ptr) ? "" : ptr);
@@ -803,9 +785,9 @@ static void bitmap_file_kick(struct bitmap *bitmap)
}
enum bitmap_page_attr {
- BITMAP_PAGE_DIRTY = 0, // there are set bits that need to be synced
- BITMAP_PAGE_CLEAN = 1, // there are bits that might need to be cleared
- BITMAP_PAGE_NEEDWRITE=2, // there are cleared bits that need to be synced
+ BITMAP_PAGE_DIRTY = 0, /* there are set bits that need to be synced */
+ BITMAP_PAGE_CLEAN = 1, /* there are bits that might need to be cleared */
+ BITMAP_PAGE_NEEDWRITE = 2, /* there are cleared bits that need to be synced */
};
static inline void set_page_attr(struct bitmap *bitmap, struct page *page,
@@ -840,15 +822,15 @@ static void bitmap_file_set_bit(struct bitmap *bitmap, sector_t block)
void *kaddr;
unsigned long chunk = block >> CHUNK_BLOCK_SHIFT(bitmap);
- if (!bitmap->filemap) {
+ if (!bitmap->filemap)
return;
- }
page = filemap_get_page(bitmap, chunk);
- if (!page) return;
+ if (!page)
+ return;
bit = file_page_offset(bitmap, chunk);
- /* set the bit */
+ /* set the bit */
kaddr = kmap_atomic(page, KM_USER0);
if (bitmap->flags & BITMAP_HOSTENDIAN)
set_bit(bit, kaddr);
@@ -859,7 +841,6 @@ static void bitmap_file_set_bit(struct bitmap *bitmap, sector_t block)
/* record page number so it gets flushed to disk when unplug occurs */
set_page_attr(bitmap, page, BITMAP_PAGE_DIRTY);
-
}
/* this gets called when the md device is ready to unplug its underlying
@@ -892,7 +873,7 @@ void bitmap_unplug(struct bitmap *bitmap)
wait = 1;
spin_unlock_irqrestore(&bitmap->lock, flags);
- if (dirty | need_write)
+ if (dirty || need_write)
write_page(bitmap, page, 0);
}
if (wait) { /* if any writes were performed, we need to wait on them */
@@ -905,6 +886,7 @@ void bitmap_unplug(struct bitmap *bitmap)
if (bitmap->flags & BITMAP_WRITE_ERROR)
bitmap_file_kick(bitmap);
}
+EXPORT_SYMBOL(bitmap_unplug);
static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed);
/* * bitmap_init_from_disk -- called at bitmap_create time to initialize
@@ -947,7 +929,6 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
if (!bitmap->mddev->bitmap_info.external)
bytes += sizeof(bitmap_super_t);
-
num_pages = (bytes + PAGE_SIZE - 1) / PAGE_SIZE;
if (file && i_size_read(file->f_mapping->host) < bytes) {
@@ -966,7 +947,7 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
/* We need 4 bits per page, rounded up to a multiple of sizeof(unsigned long) */
bitmap->filemap_attr = kzalloc(
- roundup( DIV_ROUND_UP(num_pages*4, 8), sizeof(unsigned long)),
+ roundup(DIV_ROUND_UP(num_pages*4, 8), sizeof(unsigned long)),
GFP_KERNEL);
if (!bitmap->filemap_attr)
goto err;
@@ -1021,7 +1002,7 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
if (outofdate) {
/*
* if bitmap is out of date, dirty the
- * whole page and write it out
+ * whole page and write it out
*/
paddr = kmap_atomic(page, KM_USER0);
memset(paddr + offset, 0xff,
@@ -1052,7 +1033,7 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
}
}
- /* everything went OK */
+ /* everything went OK */
ret = 0;
bitmap_mask_state(bitmap, BITMAP_STALE, MASK_UNSET);
@@ -1080,21 +1061,16 @@ void bitmap_write_all(struct bitmap *bitmap)
*/
int i;
- for (i=0; i < bitmap->file_pages; i++)
+ for (i = 0; i < bitmap->file_pages; i++)
set_page_attr(bitmap, bitmap->filemap[i],
BITMAP_PAGE_NEEDWRITE);
}
-
static void bitmap_count_page(struct bitmap *bitmap, sector_t offset, int inc)
{
sector_t chunk = offset >> CHUNK_BLOCK_SHIFT(bitmap);
unsigned long page = chunk >> PAGE_COUNTER_SHIFT;
bitmap->bp[page].count += inc;
-/*
- if (page == 0) printk("count page 0, offset %llu: %d gives %d\n",
- (unsigned long long)offset, inc, bitmap->bp[page].count);
-*/
bitmap_checkfree(bitmap, page);
}
static bitmap_counter_t *bitmap_get_counter(struct bitmap *bitmap,
@@ -1197,14 +1173,11 @@ void bitmap_daemon_work(mddev_t *mddev)
(sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
&blocks, 0);
if (bmc) {
-/*
- if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
-*/
if (*bmc)
bitmap->allclean = 0;
if (*bmc == 2) {
- *bmc=1; /* maybe clear the bit next time */
+ *bmc = 1; /* maybe clear the bit next time */
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
} else if (*bmc == 1 && !bitmap->need_sync) {
/* we can clear the bit */
@@ -1243,7 +1216,7 @@ void bitmap_daemon_work(mddev_t *mddev)
done:
if (bitmap->allclean == 0)
- bitmap->mddev->thread->timeout =
+ bitmap->mddev->thread->timeout =
bitmap->mddev->bitmap_info.daemon_sleep;
mutex_unlock(&mddev->bitmap_info.mutex);
}
@@ -1265,7 +1238,7 @@ __acquires(bitmap->lock)
if (bitmap_checkpage(bitmap, page, create) < 0) {
csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap));
- *blocks = csize - (offset & (csize- 1));
+ *blocks = csize - (offset & (csize - 1));
return NULL;
}
/* now locked ... */
@@ -1276,12 +1249,12 @@ __acquires(bitmap->lock)
int hi = (pageoff > PAGE_COUNTER_MASK);
csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap) +
PAGE_COUNTER_SHIFT - 1);
- *blocks = csize - (offset & (csize- 1));
+ *blocks = csize - (offset & (csize - 1));
return &((bitmap_counter_t *)
&bitmap->bp[page].map)[hi];
} else { /* page is allocated */
csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap));
- *blocks = csize - (offset & (csize- 1));
+ *blocks = csize - (offset & (csize - 1));
return (bitmap_counter_t *)
&(bitmap->bp[page].map[pageoff]);
}
@@ -1289,7 +1262,8 @@ __acquires(bitmap->lock)
int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sectors, int behind)
{
- if (!bitmap) return 0;
+ if (!bitmap)
+ return 0;
if (behind) {
int bw;
@@ -1328,10 +1302,10 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
continue;
}
- switch(*bmc) {
+ switch (*bmc) {
case 0:
bitmap_file_set_bit(bitmap, offset);
- bitmap_count_page(bitmap,offset, 1);
+ bitmap_count_page(bitmap, offset, 1);
blk_plug_device_unlocked(bitmap->mddev->queue);
/* fall through */
case 1:
@@ -1345,16 +1319,19 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
offset += blocks;
if (sectors > blocks)
sectors -= blocks;
- else sectors = 0;
+ else
+ sectors = 0;
}
bitmap->allclean = 0;
return 0;
}
+EXPORT_SYMBOL(bitmap_startwrite);
void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long sectors,
int success, int behind)
{
- if (!bitmap) return;
+ if (!bitmap)
+ return;
if (behind) {
if (atomic_dec_and_test(&bitmap->behind_writes))
wake_up(&bitmap->behind_wait);
@@ -1391,18 +1368,20 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto
wake_up(&bitmap->overflow_wait);
(*bmc)--;
- if (*bmc <= 2) {
+ if (*bmc <= 2)
set_page_attr(bitmap,
filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap)),
BITMAP_PAGE_CLEAN);
- }
+
spin_unlock_irqrestore(&bitmap->lock, flags);
offset += blocks;
if (sectors > blocks)
sectors -= blocks;
- else sectors = 0;
+ else
+ sectors = 0;
}
}
+EXPORT_SYMBOL(bitmap_endwrite);
static int __bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks,
int degraded)
@@ -1455,14 +1434,14 @@ int bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks,
}
return rv;
}
+EXPORT_SYMBOL(bitmap_start_sync);
void bitmap_end_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int aborted)
{
bitmap_counter_t *bmc;
unsigned long flags;
-/*
- if (offset == 0) printk("bitmap_end_sync 0 (%d)\n", aborted);
-*/ if (bitmap == NULL) {
+
+ if (bitmap == NULL) {
*blocks = 1024;
return;
}
@@ -1471,26 +1450,23 @@ void bitmap_end_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int ab
if (bmc == NULL)
goto unlock;
/* locked */
-/*
- if (offset == 0) printk("bitmap_end sync found 0x%x, blocks %d\n", *bmc, *blocks);
-*/
if (RESYNC(*bmc)) {
*bmc &= ~RESYNC_MASK;
if (!NEEDED(*bmc) && aborted)
*bmc |= NEEDED_MASK;
else {
- if (*bmc <= 2) {
+ if (*bmc <= 2)
set_page_attr(bitmap,
filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap)),
BITMAP_PAGE_CLEAN);
- }
}
}
unlock:
spin_unlock_irqrestore(&bitmap->lock, flags);
bitmap->allclean = 0;
}
+EXPORT_SYMBOL(bitmap_end_sync);
void bitmap_close_sync(struct bitmap *bitmap)
{
@@ -1507,6 +1483,7 @@ void bitmap_close_sync(struct bitmap *bitmap)
sector += blocks;
}
}
+EXPORT_SYMBOL(bitmap_close_sync);
void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector)
{
@@ -1537,6 +1514,7 @@ void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector)
bitmap->last_end_sync = jiffies;
sysfs_notify(&bitmap->mddev->kobj, NULL, "sync_completed");
}
+EXPORT_SYMBOL(bitmap_cond_end_sync);
static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed)
{
@@ -1553,9 +1531,9 @@ static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int n
spin_unlock_irq(&bitmap->lock);
return;
}
- if (! *bmc) {
+ if (!*bmc) {
struct page *page;
- *bmc = 1 | (needed?NEEDED_MASK:0);
+ *bmc = 1 | (needed ? NEEDED_MASK : 0);
bitmap_count_page(bitmap, offset, 1);
page = filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap));
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
@@ -1720,9 +1698,9 @@ int bitmap_create(mddev_t *mddev)
bitmap->chunkshift = ffz(~mddev->bitmap_info.chunksize);
/* now that chunksize and chunkshift are set, we can use these macros */
- chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
+ chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
CHUNK_BLOCK_SHIFT(bitmap);
- pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
+ pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
BUG_ON(!pages);
@@ -1775,11 +1753,11 @@ static ssize_t
location_show(mddev_t *mddev, char *page)
{
ssize_t len;
- if (mddev->bitmap_info.file) {
+ if (mddev->bitmap_info.file)
len = sprintf(page, "file");
- } else if (mddev->bitmap_info.offset) {
+ else if (mddev->bitmap_info.offset)
len = sprintf(page, "%+lld", (long long)mddev->bitmap_info.offset);
- } else
+ else
len = sprintf(page, "none");
len += sprintf(page+len, "\n");
return len;
@@ -1868,7 +1846,7 @@ timeout_show(mddev_t *mddev, char *page)
ssize_t len;
unsigned long secs = mddev->bitmap_info.daemon_sleep / HZ;
unsigned long jifs = mddev->bitmap_info.daemon_sleep % HZ;
-
+
len = sprintf(page, "%lu", secs);
if (jifs)
len += sprintf(page+len, ".%03u", jiffies_to_msecs(jifs));
@@ -2050,12 +2028,3 @@ struct attribute_group md_bitmap_group = {
.attrs = md_bitmap_attrs,
};
-
-/* the bitmap API -- for raid personalities */
-EXPORT_SYMBOL(bitmap_startwrite);
-EXPORT_SYMBOL(bitmap_endwrite);
-EXPORT_SYMBOL(bitmap_start_sync);
-EXPORT_SYMBOL(bitmap_end_sync);
-EXPORT_SYMBOL(bitmap_unplug);
-EXPORT_SYMBOL(bitmap_close_sync);
-EXPORT_SYMBOL(bitmap_cond_end_sync);
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 57eb864a8249f..209993207a55d 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -319,7 +319,7 @@ struct mddev_s
*/
struct mutex mutex;
unsigned long chunksize;
- unsigned long daemon_sleep; /* how many seconds between updates? */
+ unsigned long daemon_sleep; /* how many jiffies between updates? */
unsigned long max_write_behind; /* write-behind mode */
int external;
} bitmap_info;
--
GitLab
From 5ff5afffe6527543866a47ffab12769427283917 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:32 +1000
Subject: [PATCH 040/863] md/bitmap: reduce dependence on sysfs.
For dm-raid45 we will want to use bitmaps in dm-targets which don't
have entries in sysfs, so cope with the mddev not living in sysfs.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/bitmap.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 67fb32d1124db..8af4d655b2d3a 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1358,7 +1358,7 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto
bitmap->events_cleared < bitmap->mddev->events) {
bitmap->events_cleared = bitmap->mddev->events;
bitmap->need_sync = 1;
- sysfs_notify_dirent(bitmap->sysfs_can_clear);
+ sysfs_notify_dirent_safe(bitmap->sysfs_can_clear);
}
if (!success && ! (*bmc & NEEDED_MASK))
@@ -1643,7 +1643,7 @@ int bitmap_create(mddev_t *mddev)
struct file *file = mddev->bitmap_info.file;
int err;
sector_t start;
- struct sysfs_dirent *bm;
+ struct sysfs_dirent *bm = NULL;
BUILD_BUG_ON(sizeof(bitmap_super_t) != 256);
@@ -1664,7 +1664,8 @@ int bitmap_create(mddev_t *mddev)
bitmap->mddev = mddev;
- bm = sysfs_get_dirent(mddev->kobj.sd, NULL, "bitmap");
+ if (mddev->kobj.sd)
+ bm = sysfs_get_dirent(mddev->kobj.sd, NULL, "bitmap");
if (bm) {
bitmap->sysfs_can_clear = sysfs_get_dirent(bm, NULL, "can_clear");
sysfs_put(bm);
--
GitLab
From b63d7c2e29bf9cc94989806f2df0cfca4976b830 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:33 +1000
Subject: [PATCH 041/863] md/bitmap: clean up plugging calls.
1/ use md_unplug in bitmap.c as we will soon be using bitmaps under
arrays with no queue attached.
2/ Don't bother plugging the queue when we set a bit in the bitmap.
The reason for this was to encourage as many bits as possible to
get set before we unplug and write stuff out.
However every personality already plugs the queue after
bitmap_startwrite either directly (raid1/raid10) or be setting
STRIPE_BIT_DELAY which causes the queue to be plugged later
(raid5).
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/bitmap.c | 3 +--
drivers/md/md.c | 2 +-
drivers/md/md.h | 1 +
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 8af4d655b2d3a..3f04699725db4 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1296,7 +1296,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
prepare_to_wait(&bitmap->overflow_wait, &__wait,
TASK_UNINTERRUPTIBLE);
spin_unlock_irq(&bitmap->lock);
- blk_unplug(bitmap->mddev->queue);
+ md_unplug(bitmap->mddev);
schedule();
finish_wait(&bitmap->overflow_wait, &__wait);
continue;
@@ -1306,7 +1306,6 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
case 0:
bitmap_file_set_bit(bitmap, offset);
bitmap_count_page(bitmap, offset, 1);
- blk_plug_device_unlocked(bitmap->mddev->queue);
/* fall through */
case 1:
*bmc = 2;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 03c64e9735fb2..9d4e44e460e9c 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6627,7 +6627,7 @@ int md_allow_write(mddev_t *mddev)
}
EXPORT_SYMBOL_GPL(md_allow_write);
-static void md_unplug(mddev_t *mddev)
+void md_unplug(mddev_t *mddev)
{
if (mddev->queue)
blk_unplug(mddev->queue);
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 209993207a55d..0a850780b5d17 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -509,6 +509,7 @@ extern int md_integrity_register(mddev_t *mddev);
extern void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern int strict_strtoul_scaled(const char *cp, unsigned long *res, int scale);
extern void restore_bitmap_write_access(struct file *file);
+extern void md_unplug(mddev_t *mddev);
extern void mddev_init(mddev_t *mddev);
extern int md_run(mddev_t *mddev);
--
GitLab
From ef4256733506f2459a0c436b62267d22a3f0cec6 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:33 +1000
Subject: [PATCH 042/863] md/bitmap: optimise scanning of empty bitmaps.
A bitmap is stored as one page per 2048 bits.
If none of the bits are set, the page is not allocated.
When bitmap_get_counter finds that a page isn't allocate,
it just reports that one bit work of space isn't flagged,
rather than reporting that 2048 bits worth of space are
unflagged.
This can cause searches for flagged bits (e.g. bitmap_close_sync)
to do more work than is really necessary.
So change bitmap_get_counter (when creating) to report a number of
blocks that more accurately reports the range of the device for which
no counter currently exists.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/bitmap.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 3f04699725db4..29a3c864e6b06 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1235,29 +1235,32 @@ __acquires(bitmap->lock)
unsigned long page = chunk >> PAGE_COUNTER_SHIFT;
unsigned long pageoff = (chunk & PAGE_COUNTER_MASK) << COUNTER_BYTE_SHIFT;
sector_t csize;
+ int err;
+
+ err = bitmap_checkpage(bitmap, page, create);
- if (bitmap_checkpage(bitmap, page, create) < 0) {
+ if (bitmap->bp[page].hijacked ||
+ bitmap->bp[page].map == NULL)
+ csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap) +
+ PAGE_COUNTER_SHIFT - 1);
+ else
csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap));
- *blocks = csize - (offset & (csize - 1));
+ *blocks = csize - (offset & (csize - 1));
+
+ if (err < 0)
return NULL;
- }
+
/* now locked ... */
if (bitmap->bp[page].hijacked) { /* hijacked pointer */
/* should we use the first or second counter field
* of the hijacked pointer? */
int hi = (pageoff > PAGE_COUNTER_MASK);
- csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap) +
- PAGE_COUNTER_SHIFT - 1);
- *blocks = csize - (offset & (csize - 1));
return &((bitmap_counter_t *)
&bitmap->bp[page].map)[hi];
- } else { /* page is allocated */
- csize = ((sector_t)1) << (CHUNK_BLOCK_SHIFT(bitmap));
- *blocks = csize - (offset & (csize - 1));
+ } else /* page is allocated */
return (bitmap_counter_t *)
&(bitmap->bp[page].map[pageoff]);
- }
}
int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sectors, int behind)
--
GitLab
From e384e58549a2e9a83071ad80280c1a9053cfd84c Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:34 +1000
Subject: [PATCH 043/863] md/bitmap: prepare for storing write-intent-bitmap
via dm-dirty-log.
This allows md/raid5 to fully work as a dm target.
Normally md uses a 'filemap' which contains a list of pages of bits
each of which may be written separately.
dm-log uses and all-or-nothing approach to writing the log, so
when using a dm-log, ->filemap is NULL and the flags normally stored
in filemap_attr are stored in ->logattrs instead.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/bitmap.c | 128 ++++++++++++++++++++++++++++++--------------
drivers/md/bitmap.h | 5 ++
drivers/md/md.h | 5 ++
3 files changed, 99 insertions(+), 39 deletions(-)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 29a3c864e6b06..93765261c3638 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -29,6 +29,7 @@
#include "md.h"
#include "bitmap.h"
+#include <linux/dm-dirty-log.h>
/* debug macros */
#define DEBUG 0
@@ -694,6 +695,8 @@ static inline unsigned long file_page_offset(struct bitmap *bitmap, unsigned lon
static inline struct page *filemap_get_page(struct bitmap *bitmap,
unsigned long chunk)
{
+ if (bitmap->filemap == NULL)
+ return NULL;
if (file_page_index(bitmap, chunk) >= bitmap->file_pages)
return NULL;
return bitmap->filemap[file_page_index(bitmap, chunk)
@@ -793,19 +796,28 @@ enum bitmap_page_attr {
static inline void set_page_attr(struct bitmap *bitmap, struct page *page,
enum bitmap_page_attr attr)
{
- __set_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ if (page)
+ __set_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ else
+ __set_bit(attr, &bitmap->logattrs);
}
static inline void clear_page_attr(struct bitmap *bitmap, struct page *page,
enum bitmap_page_attr attr)
{
- __clear_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ if (page)
+ __clear_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ else
+ __clear_bit(attr, &bitmap->logattrs);
}
static inline unsigned long test_page_attr(struct bitmap *bitmap, struct page *page,
enum bitmap_page_attr attr)
{
- return test_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ if (page)
+ return test_bit((page->index<<2) + attr, bitmap->filemap_attr);
+ else
+ return test_bit(attr, &bitmap->logattrs);
}
/*
@@ -818,27 +830,30 @@ static inline unsigned long test_page_attr(struct bitmap *bitmap, struct page *p
static void bitmap_file_set_bit(struct bitmap *bitmap, sector_t block)
{
unsigned long bit;
- struct page *page;
+ struct page *page = NULL;
void *kaddr;
unsigned long chunk = block >> CHUNK_BLOCK_SHIFT(bitmap);
- if (!bitmap->filemap)
- return;
-
- page = filemap_get_page(bitmap, chunk);
- if (!page)
- return;
- bit = file_page_offset(bitmap, chunk);
+ if (!bitmap->filemap) {
+ struct dm_dirty_log *log = bitmap->mddev->bitmap_info.log;
+ if (log)
+ log->type->mark_region(log, chunk);
+ } else {
- /* set the bit */
- kaddr = kmap_atomic(page, KM_USER0);
- if (bitmap->flags & BITMAP_HOSTENDIAN)
- set_bit(bit, kaddr);
- else
- ext2_set_bit(bit, kaddr);
- kunmap_atomic(kaddr, KM_USER0);
- PRINTK("set file bit %lu page %lu\n", bit, page->index);
+ page = filemap_get_page(bitmap, chunk);
+ if (!page)
+ return;
+ bit = file_page_offset(bitmap, chunk);
+ /* set the bit */
+ kaddr = kmap_atomic(page, KM_USER0);
+ if (bitmap->flags & BITMAP_HOSTENDIAN)
+ set_bit(bit, kaddr);
+ else
+ ext2_set_bit(bit, kaddr);
+ kunmap_atomic(kaddr, KM_USER0);
+ PRINTK("set file bit %lu page %lu\n", bit, page->index);
+ }
/* record page number so it gets flushed to disk when unplug occurs */
set_page_attr(bitmap, page, BITMAP_PAGE_DIRTY);
}
@@ -855,6 +870,16 @@ void bitmap_unplug(struct bitmap *bitmap)
if (!bitmap)
return;
+ if (!bitmap->filemap) {
+ /* Must be using a dirty_log */
+ struct dm_dirty_log *log = bitmap->mddev->bitmap_info.log;
+ dirty = test_and_clear_bit(BITMAP_PAGE_DIRTY, &bitmap->logattrs);
+ need_write = test_and_clear_bit(BITMAP_PAGE_NEEDWRITE, &bitmap->logattrs);
+ if (dirty || need_write)
+ if (log->type->flush(log))
+ bitmap->flags |= BITMAP_WRITE_ERROR;
+ goto out;
+ }
/* look at each page to see if there are any set bits that need to be
* flushed out to disk */
@@ -883,6 +908,7 @@ void bitmap_unplug(struct bitmap *bitmap)
else
md_super_wait(bitmap->mddev);
}
+out:
if (bitmap->flags & BITMAP_WRITE_ERROR)
bitmap_file_kick(bitmap);
}
@@ -925,11 +951,11 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
printk(KERN_INFO "%s: bitmap file is out of date, doing full "
"recovery\n", bmname(bitmap));
- bytes = (chunks + 7) / 8;
+ bytes = DIV_ROUND_UP(bitmap->chunks, 8);
if (!bitmap->mddev->bitmap_info.external)
bytes += sizeof(bitmap_super_t);
- num_pages = (bytes + PAGE_SIZE - 1) / PAGE_SIZE;
+ num_pages = DIV_ROUND_UP(bytes, PAGE_SIZE);
if (file && i_size_read(file->f_mapping->host) < bytes) {
printk(KERN_INFO "%s: bitmap file too short %lu < %lu\n",
@@ -1090,6 +1116,7 @@ void bitmap_daemon_work(mddev_t *mddev)
struct page *page = NULL, *lastpage = NULL;
int blocks;
void *paddr;
+ struct dm_dirty_log *log = mddev->bitmap_info.log;
/* Use a mutex to guard daemon_work against
* bitmap_destroy.
@@ -1114,11 +1141,12 @@ void bitmap_daemon_work(mddev_t *mddev)
spin_lock_irqsave(&bitmap->lock, flags);
for (j = 0; j < bitmap->chunks; j++) {
bitmap_counter_t *bmc;
- if (!bitmap->filemap)
- /* error or shutdown */
- break;
-
- page = filemap_get_page(bitmap, j);
+ if (!bitmap->filemap) {
+ if (!log)
+ /* error or shutdown */
+ break;
+ } else
+ page = filemap_get_page(bitmap, j);
if (page != lastpage) {
/* skip this page unless it's marked as needing cleaning */
@@ -1187,14 +1215,17 @@ void bitmap_daemon_work(mddev_t *mddev)
-1);
/* clear the bit */
- paddr = kmap_atomic(page, KM_USER0);
- if (bitmap->flags & BITMAP_HOSTENDIAN)
- clear_bit(file_page_offset(bitmap, j),
- paddr);
- else
- ext2_clear_bit(file_page_offset(bitmap, j),
- paddr);
- kunmap_atomic(paddr, KM_USER0);
+ if (page) {
+ paddr = kmap_atomic(page, KM_USER0);
+ if (bitmap->flags & BITMAP_HOSTENDIAN)
+ clear_bit(file_page_offset(bitmap, j),
+ paddr);
+ else
+ ext2_clear_bit(file_page_offset(bitmap, j),
+ paddr);
+ kunmap_atomic(paddr, KM_USER0);
+ } else
+ log->type->clear_region(log, j);
}
} else
j |= PAGE_COUNTER_MASK;
@@ -1202,12 +1233,16 @@ void bitmap_daemon_work(mddev_t *mddev)
spin_unlock_irqrestore(&bitmap->lock, flags);
/* now sync the final page */
- if (lastpage != NULL) {
+ if (lastpage != NULL || log != NULL) {
spin_lock_irqsave(&bitmap->lock, flags);
if (test_page_attr(bitmap, lastpage, BITMAP_PAGE_NEEDWRITE)) {
clear_page_attr(bitmap, lastpage, BITMAP_PAGE_NEEDWRITE);
spin_unlock_irqrestore(&bitmap->lock, flags);
- write_page(bitmap, lastpage, 0);
+ if (lastpage)
+ write_page(bitmap, lastpage, 0);
+ else
+ if (log->type->flush(log))
+ bitmap->flags |= BITMAP_WRITE_ERROR;
} else {
set_page_attr(bitmap, lastpage, BITMAP_PAGE_NEEDWRITE);
spin_unlock_irqrestore(&bitmap->lock, flags);
@@ -1372,7 +1407,9 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto
(*bmc)--;
if (*bmc <= 2)
set_page_attr(bitmap,
- filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap)),
+ filemap_get_page(
+ bitmap,
+ offset >> CHUNK_BLOCK_SHIFT(bitmap)),
BITMAP_PAGE_CLEAN);
spin_unlock_irqrestore(&bitmap->lock, flags);
@@ -1649,10 +1686,13 @@ int bitmap_create(mddev_t *mddev)
BUILD_BUG_ON(sizeof(bitmap_super_t) != 256);
- if (!file && !mddev->bitmap_info.offset) /* bitmap disabled, nothing to do */
+ if (!file
+ && !mddev->bitmap_info.offset
+ && !mddev->bitmap_info.log) /* bitmap disabled, nothing to do */
return 0;
BUG_ON(file && mddev->bitmap_info.offset);
+ BUG_ON(mddev->bitmap_info.offset && mddev->bitmap_info.log);
bitmap = kzalloc(sizeof(*bitmap), GFP_KERNEL);
if (!bitmap)
@@ -1730,7 +1770,17 @@ int bitmap_create(mddev_t *mddev)
|| bitmap->events_cleared == mddev->events)
/* no need to keep dirty bits to optimise a re-add of a missing device */
start = mddev->recovery_cp;
- err = bitmap_init_from_disk(bitmap, start);
+ if (mddev->bitmap_info.log) {
+ unsigned long i;
+ struct dm_dirty_log *log = mddev->bitmap_info.log;
+ for (i = 0; i < bitmap->chunks; i++)
+ if (!log->type->in_sync(log, i, 1))
+ bitmap_set_memory_bits(bitmap,
+ (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap),
+ 1);
+ err = 0;
+ } else
+ err = bitmap_init_from_disk(bitmap, start);
if (err)
goto error;
diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h
index 3797dea4723a3..a7a11134268d6 100644
--- a/drivers/md/bitmap.h
+++ b/drivers/md/bitmap.h
@@ -222,6 +222,10 @@ struct bitmap {
unsigned long file_pages; /* number of pages in the file */
int last_page_size; /* bytes in the last page */
+ unsigned long logattrs; /* used when filemap_attr doesn't exist
+ * because we are working with a dirty_log
+ */
+
unsigned long flags;
int allclean;
@@ -243,6 +247,7 @@ struct bitmap {
wait_queue_head_t behind_wait;
struct sysfs_dirent *sysfs_can_clear;
+
};
/* the bitmap API */
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 0a850780b5d17..cccbadb31bae7 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -317,6 +317,11 @@ struct mddev_s
* hot-adding a bitmap. It should
* eventually be settable by sysfs.
*/
+ /* When md is serving under dm, it might use a
+ * dirty_log to store the bits.
+ */
+ struct dm_dirty_log *log;
+
struct mutex mutex;
unsigned long chunksize;
unsigned long daemon_sleep; /* how many jiffies between updates? */
--
GitLab
From 69e51b449d383e97b1b9f890f8378c96e9e17346 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 1 Jun 2010 19:37:35 +1000
Subject: [PATCH 044/863] md/bitmap: separate out loading a bitmap from
initialising the structures.
dm makes this distinction between ->ctr and ->resume, so we need to
too.
Also get the new bitmap_load to clear out the bitmap first, as this is
most consistent with the dm suspend/resume approach
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/bitmap.c | 69 +++++++++++++++++++++++++++++++--------------
drivers/md/bitmap.h | 1 +
drivers/md/md.c | 13 +++++++--
3 files changed, 60 insertions(+), 23 deletions(-)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 93765261c3638..1ba1e122e9489 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1681,7 +1681,6 @@ int bitmap_create(mddev_t *mddev)
unsigned long pages;
struct file *file = mddev->bitmap_info.file;
int err;
- sector_t start;
struct sysfs_dirent *bm = NULL;
BUILD_BUG_ON(sizeof(bitmap_super_t) != 256);
@@ -1763,13 +1762,40 @@ int bitmap_create(mddev_t *mddev)
if (!bitmap->bp)
goto error;
- /* now that we have some pages available, initialize the in-memory
- * bitmap from the on-disk bitmap */
- start = 0;
- if (mddev->degraded == 0
- || bitmap->events_cleared == mddev->events)
- /* no need to keep dirty bits to optimise a re-add of a missing device */
- start = mddev->recovery_cp;
+ printk(KERN_INFO "created bitmap (%lu pages) for device %s\n",
+ pages, bmname(bitmap));
+
+ mddev->bitmap = bitmap;
+
+
+ return (bitmap->flags & BITMAP_WRITE_ERROR) ? -EIO : 0;
+
+ error:
+ bitmap_free(bitmap);
+ return err;
+}
+
+int bitmap_load(mddev_t *mddev)
+{
+ int err = 0;
+ sector_t sector = 0;
+ struct bitmap *bitmap = mddev->bitmap;
+
+ if (!bitmap)
+ goto out;
+
+ /* Clear out old bitmap info first: Either there is none, or we
+ * are resuming after someone else has possibly changed things,
+ * so we should forget old cached info.
+ * All chunks should be clean, but some might need_sync.
+ */
+ while (sector < mddev->resync_max_sectors) {
+ int blocks;
+ bitmap_start_sync(bitmap, sector, &blocks, 0);
+ sector += blocks;
+ }
+ bitmap_close_sync(bitmap);
+
if (mddev->bitmap_info.log) {
unsigned long i;
struct dm_dirty_log *log = mddev->bitmap_info.log;
@@ -1778,29 +1804,30 @@ int bitmap_create(mddev_t *mddev)
bitmap_set_memory_bits(bitmap,
(sector_t)i << CHUNK_BLOCK_SHIFT(bitmap),
1);
- err = 0;
- } else
- err = bitmap_init_from_disk(bitmap, start);
+ } else {
+ sector_t start = 0;
+ if (mddev->degraded == 0
+ || bitmap->events_cleared == mddev->events)
+ /* no need to keep dirty bits to optimise a
+ * re-add of a missing device */
+ start = mddev->recovery_cp;
+ err = bitmap_init_from_disk(bitmap, start);
+ }
if (err)
- goto error;
-
- printk(KERN_INFO "created bitmap (%lu pages) for device %s\n",
- pages, bmname(bitmap));
-
- mddev->bitmap = bitmap;
+ goto out;
mddev->thread->timeout = mddev->bitmap_info.daemon_sleep;
md_wakeup_thread(mddev->thread);
bitmap_update_sb(bitmap);
- return (bitmap->flags & BITMAP_WRITE_ERROR) ? -EIO : 0;
-
- error:
- bitmap_free(bitmap);
+ if (bitmap->flags & BITMAP_WRITE_ERROR)
+ err = -EIO;
+out:
return err;
}
+EXPORT_SYMBOL_GPL(bitmap_load);
static ssize_t
location_show(mddev_t *mddev, char *page)
diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h
index a7a11134268d6..e872a7bad6b8f 100644
--- a/drivers/md/bitmap.h
+++ b/drivers/md/bitmap.h
@@ -254,6 +254,7 @@ struct bitmap {
/* these are used only by md/bitmap */
int bitmap_create(mddev_t *mddev);
+int bitmap_load(mddev_t *mddev);
void bitmap_flush(mddev_t *mddev);
void bitmap_destroy(mddev_t *mddev);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9d4e44e460e9c..40b7ca0294ac2 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4594,7 +4594,11 @@ static int do_md_run(mddev_t *mddev)
err = md_run(mddev);
if (err)
goto out;
-
+ err = bitmap_load(mddev);
+ if (err) {
+ bitmap_destroy(mddev);
+ goto out;
+ }
set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
@@ -5382,8 +5386,11 @@ static int set_bitmap_file(mddev_t *mddev, int fd)
err = 0;
if (mddev->pers) {
mddev->pers->quiesce(mddev, 1);
- if (fd >= 0)
+ if (fd >= 0) {
err = bitmap_create(mddev);
+ if (!err)
+ err = bitmap_load(mddev);
+ }
if (fd < 0 || err) {
bitmap_destroy(mddev);
fd = -1; /* make sure to put the file */
@@ -5632,6 +5639,8 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
mddev->bitmap_info.default_offset;
mddev->pers->quiesce(mddev, 1);
rv = bitmap_create(mddev);
+ if (!rv)
+ rv = bitmap_load(mddev);
if (rv)
bitmap_destroy(mddev);
mddev->pers->quiesce(mddev, 0);
--
GitLab
From b7ba83715317007962ee318587de92f14e9c3aaa Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:04 -0500
Subject: [PATCH 045/863] inotify: simplify the inotify idr handling
This patch moves all of the idr editing operations into their own idr
functions. It makes it easier to prove locking correctness and to to
understand the code flow.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_user.c | 194 ++++++++++++++++++++++---------
1 file changed, 139 insertions(+), 55 deletions(-)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index e46ca685b9be3..653c507b1bb37 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -357,6 +357,77 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns
return error;
}
+static int inotify_add_to_idr(struct idr *idr, spinlock_t *idr_lock,
+ int last_wd,
+ struct inotify_inode_mark_entry *ientry)
+{
+ int ret;
+
+ do {
+ if (unlikely(!idr_pre_get(idr, GFP_KERNEL)))
+ return -ENOMEM;
+
+ spin_lock(idr_lock);
+ ret = idr_get_new_above(idr, ientry, last_wd + 1,
+ &ientry->wd);
+ /* we added the mark to the idr, take a reference */
+ if (!ret)
+ fsnotify_get_mark(&ientry->fsn_entry);
+ spin_unlock(idr_lock);
+ } while (ret == -EAGAIN);
+
+ return ret;
+}
+
+static struct inotify_inode_mark_entry *inotify_idr_find_locked(struct fsnotify_group *group,
+ int wd)
+{
+ struct idr *idr = &group->inotify_data.idr;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
+ struct inotify_inode_mark_entry *ientry;
+
+ assert_spin_locked(idr_lock);
+
+ ientry = idr_find(idr, wd);
+ if (ientry) {
+ struct fsnotify_mark_entry *fsn_entry = &ientry->fsn_entry;
+
+ fsnotify_get_mark(fsn_entry);
+ /* One ref for being in the idr, one ref we just took */
+ BUG_ON(atomic_read(&fsn_entry->refcnt) < 2);
+ }
+
+ return ientry;
+}
+
+static struct inotify_inode_mark_entry *inotify_idr_find(struct fsnotify_group *group,
+ int wd)
+{
+ struct inotify_inode_mark_entry *ientry;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
+
+ spin_lock(idr_lock);
+ ientry = inotify_idr_find_locked(group, wd);
+ spin_unlock(idr_lock);
+
+ return ientry;
+}
+
+static void do_inotify_remove_from_idr(struct fsnotify_group *group,
+ struct inotify_inode_mark_entry *ientry)
+{
+ struct idr *idr = &group->inotify_data.idr;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
+ int wd = ientry->wd;
+
+ assert_spin_locked(idr_lock);
+
+ idr_remove(idr, wd);
+
+ /* removed from the idr, drop that ref */
+ fsnotify_put_mark(&ientry->fsn_entry);
+}
+
/*
* Remove the mark from the idr (if present) and drop the reference
* on the mark because it was in the idr.
@@ -364,42 +435,72 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns
static void inotify_remove_from_idr(struct fsnotify_group *group,
struct inotify_inode_mark_entry *ientry)
{
- struct idr *idr;
- struct fsnotify_mark_entry *entry;
- struct inotify_inode_mark_entry *found_ientry;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
+ struct inotify_inode_mark_entry *found_ientry = NULL;
int wd;
- spin_lock(&group->inotify_data.idr_lock);
- idr = &group->inotify_data.idr;
+ spin_lock(idr_lock);
wd = ientry->wd;
- if (wd == -1)
+ /*
+ * does this ientry think it is in the idr? we shouldn't get called
+ * if it wasn't....
+ */
+ if (wd == -1) {
+ printk(KERN_WARNING "%s: ientry=%p ientry->wd=%d ientry->group=%p"
+ " ientry->inode=%p\n", __func__, ientry, ientry->wd,
+ ientry->fsn_entry.group, ientry->fsn_entry.inode);
+ WARN_ON(1);
goto out;
+ }
- entry = idr_find(&group->inotify_data.idr, wd);
- if (unlikely(!entry))
+ /* Lets look in the idr to see if we find it */
+ found_ientry = inotify_idr_find_locked(group, wd);
+ if (unlikely(!found_ientry)) {
+ printk(KERN_WARNING "%s: ientry=%p ientry->wd=%d ientry->group=%p"
+ " ientry->inode=%p\n", __func__, ientry, ientry->wd,
+ ientry->fsn_entry.group, ientry->fsn_entry.inode);
+ WARN_ON(1);
goto out;
+ }
- found_ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ /*
+ * We found an entry in the idr at the right wd, but it's
+ * not the entry we were told to remove. eparis seriously
+ * fucked up somewhere.
+ */
if (unlikely(found_ientry != ientry)) {
- /* We found an entry in the idr with the right wd, but it's
- * not the entry we were told to remove. eparis seriously
- * fucked up somewhere. */
WARN_ON(1);
- ientry->wd = -1;
+ printk(KERN_WARNING "%s: ientry=%p ientry->wd=%d ientry->group=%p "
+ "entry->inode=%p found_ientry=%p found_ientry->wd=%d "
+ "found_ientry->group=%p found_ientry->inode=%p\n",
+ __func__, ientry, ientry->wd, ientry->fsn_entry.group,
+ ientry->fsn_entry.inode, found_ientry, found_ientry->wd,
+ found_ientry->fsn_entry.group,
+ found_ientry->fsn_entry.inode);
goto out;
}
- /* One ref for being in the idr, one ref held by the caller */
- BUG_ON(atomic_read(&entry->refcnt) < 2);
-
- idr_remove(idr, wd);
- ientry->wd = -1;
+ /*
+ * One ref for being in the idr
+ * one ref held by the caller trying to kill us
+ * one ref grabbed by inotify_idr_find
+ */
+ if (unlikely(atomic_read(&ientry->fsn_entry.refcnt) < 3)) {
+ printk(KERN_WARNING "%s: ientry=%p ientry->wd=%d ientry->group=%p"
+ " ientry->inode=%p\n", __func__, ientry, ientry->wd,
+ ientry->fsn_entry.group, ientry->fsn_entry.inode);
+ /* we can't really recover with bad ref cnting.. */
+ BUG();
+ }
- /* removed from the idr, drop that ref */
- fsnotify_put_mark(entry);
+ do_inotify_remove_from_idr(group, ientry);
out:
- spin_unlock(&group->inotify_data.idr_lock);
+ /* match the ref taken by inotify_idr_find_locked() */
+ if (found_ientry)
+ fsnotify_put_mark(&found_ientry->fsn_entry);
+ ientry->wd = -1;
+ spin_unlock(idr_lock);
}
/*
@@ -524,6 +625,8 @@ static int inotify_new_watch(struct fsnotify_group *group,
struct inotify_inode_mark_entry *tmp_ientry;
__u32 mask;
int ret;
+ struct idr *idr = &group->inotify_data.idr;
+ spinlock_t *idr_lock = &group->inotify_data.idr_lock;
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
@@ -541,28 +644,11 @@ static int inotify_new_watch(struct fsnotify_group *group,
ret = -ENOSPC;
if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
goto out_err;
-retry:
- ret = -ENOMEM;
- if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
- goto out_err;
-
- /* we are putting the mark on the idr, take a reference */
- fsnotify_get_mark(&tmp_ientry->fsn_entry);
-
- spin_lock(&group->inotify_data.idr_lock);
- ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
- group->inotify_data.last_wd+1,
- &tmp_ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
- if (ret) {
- /* we didn't get on the idr, drop the idr reference */
- fsnotify_put_mark(&tmp_ientry->fsn_entry);
- /* idr was out of memory allocate and try again */
- if (ret == -EAGAIN)
- goto retry;
+ ret = inotify_add_to_idr(idr, idr_lock, group->inotify_data.last_wd,
+ tmp_ientry);
+ if (ret)
goto out_err;
- }
/* we are on the idr, now get on the inode */
ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
@@ -726,7 +812,7 @@ SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
{
struct fsnotify_group *group;
- struct fsnotify_mark_entry *entry;
+ struct inotify_inode_mark_entry *ientry;
struct file *filp;
int ret = 0, fput_needed;
@@ -735,25 +821,23 @@ SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
return -EBADF;
/* verify that this is indeed an inotify instance */
- if (unlikely(filp->f_op != &inotify_fops)) {
- ret = -EINVAL;
+ ret = -EINVAL;
+ if (unlikely(filp->f_op != &inotify_fops))
goto out;
- }
group = filp->private_data;
- spin_lock(&group->inotify_data.idr_lock);
- entry = idr_find(&group->inotify_data.idr, wd);
- if (unlikely(!entry)) {
- spin_unlock(&group->inotify_data.idr_lock);
- ret = -EINVAL;
+ ret = -EINVAL;
+ ientry = inotify_idr_find(group, wd);
+ if (unlikely(!ientry))
goto out;
- }
- fsnotify_get_mark(entry);
- spin_unlock(&group->inotify_data.idr_lock);
- fsnotify_destroy_mark_by_entry(entry);
- fsnotify_put_mark(entry);
+ ret = 0;
+
+ fsnotify_destroy_mark_by_entry(&ientry->fsn_entry);
+
+ /* match ref taken by inotify_idr_find */
+ fsnotify_put_mark(&ientry->fsn_entry);
out:
fput_light(filp, fput_needed);
--
GitLab
From ae7b8f4108bcffb42173f867ce845268c7202d48 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:04 -0500
Subject: [PATCH 046/863] Audit: clean up the audit_watch split
No real changes, just cleanup to the audit_watch split patch which we done
with minimal code changes for easy review. Now fix interfaces to make
things work better.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
kernel/audit.c | 1 -
kernel/audit.h | 13 +++------
kernel/audit_watch.c | 67 ++++++++++++++++++++++++++------------------
kernel/auditfilter.c | 41 ++++++++++-----------------
kernel/auditsc.c | 5 ++--
5 files changed, 60 insertions(+), 67 deletions(-)
diff --git a/kernel/audit.c b/kernel/audit.c
index c71bd26631a28..05a32f0d87dcd 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -56,7 +56,6 @@
#include <net/netlink.h>
#include <linux/skbuff.h>
#include <linux/netlink.h>
-#include <linux/inotify.h>
#include <linux/freezer.h>
#include <linux/tty.h>
diff --git a/kernel/audit.h b/kernel/audit.h
index 208687be4f30c..82c8a09099f43 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -104,20 +104,15 @@ extern void audit_free_rule_rcu(struct rcu_head *);
extern struct list_head audit_filter_list[];
/* audit watch functions */
-extern unsigned long audit_watch_inode(struct audit_watch *watch);
-extern dev_t audit_watch_dev(struct audit_watch *watch);
extern void audit_put_watch(struct audit_watch *watch);
extern void audit_get_watch(struct audit_watch *watch);
extern int audit_to_watch(struct audit_krule *krule, char *path, int len, u32 op);
-extern int audit_add_watch(struct audit_krule *krule);
-extern void audit_remove_watch(struct audit_watch *watch);
+extern int audit_add_watch(struct audit_krule *krule, struct list_head **list);
extern void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list);
-extern void audit_inotify_unregister(struct list_head *in_list);
+extern void audit_watch_inotify_unregister(struct list_head *in_list);
extern char *audit_watch_path(struct audit_watch *watch);
-extern struct list_head *audit_watch_rules(struct audit_watch *watch);
-
-extern struct audit_entry *audit_dupe_rule(struct audit_krule *old,
- struct audit_watch *watch);
+extern int audit_watch_compare(struct audit_watch *watch, unsigned long ino, dev_t dev);
+extern struct audit_entry *audit_dupe_rule(struct audit_krule *old);
#ifdef CONFIG_AUDIT_TREE
extern struct audit_chunk *audit_tree_lookup(const struct inode *);
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 8df43696f4ba6..c2ca7168bfd1f 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -51,12 +51,12 @@ struct audit_watch {
unsigned long ino; /* associated inode number */
struct audit_parent *parent; /* associated parent */
struct list_head wlist; /* entry in parent->watches list */
- struct list_head rules; /* associated rules */
+ struct list_head rules; /* anchor for krule->rlist */
};
struct audit_parent {
- struct list_head ilist; /* entry in inotify registration list */
- struct list_head watches; /* associated watches */
+ struct list_head ilist; /* tmp list used to free parents */
+ struct list_head watches; /* anchor for audit_watch->wlist */
struct inotify_watch wdata; /* inotify watch data */
unsigned flags; /* status flags */
};
@@ -78,13 +78,18 @@ struct inotify_handle *audit_ih;
/* Inotify events we care about. */
#define AUDIT_IN_WATCH IN_MOVE|IN_CREATE|IN_DELETE|IN_DELETE_SELF|IN_MOVE_SELF
-static void audit_free_parent(struct inotify_watch *i_watch)
+static void audit_free_parent(struct audit_parent *parent)
+{
+ WARN_ON(!list_empty(&parent->watches));
+ kfree(parent);
+}
+
+static void audit_destroy_watch(struct inotify_watch *i_watch)
{
struct audit_parent *parent;
parent = container_of(i_watch, struct audit_parent, wdata);
- WARN_ON(!list_empty(&parent->watches));
- kfree(parent);
+ audit_free_parent(parent);
}
void audit_get_watch(struct audit_watch *watch)
@@ -115,19 +120,11 @@ char *audit_watch_path(struct audit_watch *watch)
return watch->path;
}
-struct list_head *audit_watch_rules(struct audit_watch *watch)
+int audit_watch_compare(struct audit_watch *watch, unsigned long ino, dev_t dev)
{
- return &watch->rules;
-}
-
-unsigned long audit_watch_inode(struct audit_watch *watch)
-{
- return watch->ino;
-}
-
-dev_t audit_watch_dev(struct audit_watch *watch)
-{
- return watch->dev;
+ return (watch->ino != (unsigned long)-1) &&
+ (watch->ino == ino) &&
+ (watch->dev == dev);
}
/* Initialize a parent watch entry. */
@@ -149,7 +146,7 @@ static struct audit_parent *audit_init_parent(struct nameidata *ndp)
wd = inotify_add_watch(audit_ih, &parent->wdata,
ndp->path.dentry->d_inode, AUDIT_IN_WATCH);
if (wd < 0) {
- audit_free_parent(&parent->wdata);
+ audit_free_parent(parent);
return ERR_PTR(wd);
}
@@ -251,15 +248,19 @@ static void audit_update_watch(struct audit_parent *parent,
struct audit_entry *oentry, *nentry;
mutex_lock(&audit_filter_mutex);
+ /* Run all of the watches on this parent looking for the one that
+ * matches the given dname */
list_for_each_entry_safe(owatch, nextw, &parent->watches, wlist) {
if (audit_compare_dname_path(dname, owatch->path, NULL))
continue;
/* If the update involves invalidating rules, do the inode-based
* filtering now, so we don't omit records. */
- if (invalidating && current->audit_context)
+ if (invalidating && !audit_dummy_context())
audit_filter_inodes(current, current->audit_context);
+ /* updating ino will likely change which audit_hash_list we
+ * are on so we need a new watch for the new list */
nwatch = audit_dupe_watch(owatch);
if (IS_ERR(nwatch)) {
mutex_unlock(&audit_filter_mutex);
@@ -275,12 +276,21 @@ static void audit_update_watch(struct audit_parent *parent,
list_del(&oentry->rule.rlist);
list_del_rcu(&oentry->list);
- nentry = audit_dupe_rule(&oentry->rule, nwatch);
+ nentry = audit_dupe_rule(&oentry->rule);
if (IS_ERR(nentry)) {
list_del(&oentry->rule.list);
audit_panic("error updating watch, removing");
} else {
int h = audit_hash_ino((u32)ino);
+
+ /*
+ * nentry->rule.watch == oentry->rule.watch so
+ * we must drop that reference and set it to our
+ * new watch.
+ */
+ audit_put_watch(nentry->rule.watch);
+ audit_get_watch(nwatch);
+ nentry->rule.watch = nwatch;
list_add(&nentry->rule.rlist, &nwatch->rules);
list_add_rcu(&nentry->list, &audit_inode_hash[h]);
list_replace(&oentry->rule.list,
@@ -329,14 +339,14 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
/* Unregister inotify watches for parents on in_list.
* Generates an IN_IGNORED event. */
-void audit_inotify_unregister(struct list_head *in_list)
+void audit_watch_inotify_unregister(struct list_head *in_list)
{
struct audit_parent *p, *n;
list_for_each_entry_safe(p, n, in_list, ilist) {
list_del(&p->ilist);
inotify_rm_watch(audit_ih, &p->wdata);
- /* the unpin matching the pin in audit_do_del_rule() */
+ /* the unpin matching the pin in audit_remove_watch_rule() */
unpin_inotify_watch(&p->wdata);
}
}
@@ -423,13 +433,13 @@ static void audit_add_to_parent(struct audit_krule *krule,
/* Find a matching watch entry, or add this one.
* Caller must hold audit_filter_mutex. */
-int audit_add_watch(struct audit_krule *krule)
+int audit_add_watch(struct audit_krule *krule, struct list_head **list)
{
struct audit_watch *watch = krule->watch;
struct inotify_watch *i_watch;
struct audit_parent *parent;
struct nameidata *ndp = NULL, *ndw = NULL;
- int ret = 0;
+ int h, ret = 0;
mutex_unlock(&audit_filter_mutex);
@@ -475,6 +485,8 @@ int audit_add_watch(struct audit_krule *krule)
/* match get in audit_init_parent or inotify_find_watch */
put_inotify_watch(&parent->wdata);
+ h = audit_hash_ino((u32)watch->ino);
+ *list = &audit_inode_hash[h];
error:
audit_put_nd(ndp, ndw); /* NULL args OK */
return ret;
@@ -514,8 +526,7 @@ static void audit_handle_ievent(struct inotify_watch *i_watch, u32 wd, u32 mask,
parent = container_of(i_watch, struct audit_parent, wdata);
if (mask & (IN_CREATE|IN_MOVED_TO) && inode)
- audit_update_watch(parent, dname, inode->i_sb->s_dev,
- inode->i_ino, 0);
+ audit_update_watch(parent, dname, inode->i_sb->s_dev, inode->i_ino, 0);
else if (mask & (IN_DELETE|IN_MOVED_FROM))
audit_update_watch(parent, dname, (dev_t)-1, (unsigned long)-1, 1);
/* inotify automatically removes the watch and sends IN_IGNORED */
@@ -531,7 +542,7 @@ static void audit_handle_ievent(struct inotify_watch *i_watch, u32 wd, u32 mask,
static const struct inotify_operations audit_inotify_ops = {
.handle_event = audit_handle_ievent,
- .destroy_watch = audit_free_parent,
+ .destroy_watch = audit_destroy_watch,
};
static int __init audit_watch_init(void)
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index ce08041f578d8..ac87577f36b5d 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -71,6 +71,7 @@ static inline void audit_free_rule(struct audit_entry *e)
{
int i;
struct audit_krule *erule = &e->rule;
+
/* some rules don't have associated watches */
if (erule->watch)
audit_put_watch(erule->watch);
@@ -746,8 +747,7 @@ static inline int audit_dupe_lsm_field(struct audit_field *df,
* rule with the new rule in the filterlist, then free the old rule.
* The rlist element is undefined; list manipulations are handled apart from
* the initial copy. */
-struct audit_entry *audit_dupe_rule(struct audit_krule *old,
- struct audit_watch *watch)
+struct audit_entry *audit_dupe_rule(struct audit_krule *old)
{
u32 fcount = old->field_count;
struct audit_entry *entry;
@@ -769,8 +769,8 @@ struct audit_entry *audit_dupe_rule(struct audit_krule *old,
new->prio = old->prio;
new->buflen = old->buflen;
new->inode_f = old->inode_f;
- new->watch = NULL;
new->field_count = old->field_count;
+
/*
* note that we are OK with not refcounting here; audit_match_tree()
* never dereferences tree and we can't get false positives there
@@ -811,9 +811,9 @@ struct audit_entry *audit_dupe_rule(struct audit_krule *old,
}
}
- if (watch) {
- audit_get_watch(watch);
- new->watch = watch;
+ if (old->watch) {
+ audit_get_watch(old->watch);
+ new->watch = old->watch;
}
return entry;
@@ -866,7 +866,7 @@ static inline int audit_add_rule(struct audit_entry *entry)
struct audit_watch *watch = entry->rule.watch;
struct audit_tree *tree = entry->rule.tree;
struct list_head *list;
- int h, err;
+ int err;
#ifdef CONFIG_AUDITSYSCALL
int dont_count = 0;
@@ -889,15 +889,11 @@ static inline int audit_add_rule(struct audit_entry *entry)
if (watch) {
/* audit_filter_mutex is dropped and re-taken during this call */
- err = audit_add_watch(&entry->rule);
+ err = audit_add_watch(&entry->rule, &list);
if (err) {
mutex_unlock(&audit_filter_mutex);
goto error;
}
- /* entry->rule.watch may have changed during audit_add_watch() */
- watch = entry->rule.watch;
- h = audit_hash_ino((u32)audit_watch_inode(watch));
- list = &audit_inode_hash[h];
}
if (tree) {
err = audit_add_tree_rule(&entry->rule);
@@ -949,7 +945,7 @@ static inline int audit_del_rule(struct audit_entry *entry)
struct audit_watch *watch = entry->rule.watch;
struct audit_tree *tree = entry->rule.tree;
struct list_head *list;
- LIST_HEAD(inotify_list);
+ LIST_HEAD(inotify_unregister_list);
int ret = 0;
#ifdef CONFIG_AUDITSYSCALL
int dont_count = 0;
@@ -969,7 +965,7 @@ static inline int audit_del_rule(struct audit_entry *entry)
}
if (e->rule.watch)
- audit_remove_watch_rule(&e->rule, &inotify_list);
+ audit_remove_watch_rule(&e->rule, &inotify_unregister_list);
if (e->rule.tree)
audit_remove_tree_rule(&e->rule);
@@ -987,8 +983,8 @@ static inline int audit_del_rule(struct audit_entry *entry)
#endif
mutex_unlock(&audit_filter_mutex);
- if (!list_empty(&inotify_list))
- audit_inotify_unregister(&inotify_list);
+ if (!list_empty(&inotify_unregister_list))
+ audit_watch_inotify_unregister(&inotify_unregister_list);
out:
if (watch)
@@ -1323,30 +1319,23 @@ static int update_lsm_rule(struct audit_krule *r)
{
struct audit_entry *entry = container_of(r, struct audit_entry, rule);
struct audit_entry *nentry;
- struct audit_watch *watch;
- struct audit_tree *tree;
int err = 0;
if (!security_audit_rule_known(r))
return 0;
- watch = r->watch;
- tree = r->tree;
- nentry = audit_dupe_rule(r, watch);
+ nentry = audit_dupe_rule(r);
if (IS_ERR(nentry)) {
/* save the first error encountered for the
* return value */
err = PTR_ERR(nentry);
audit_panic("error updating LSM filters");
- if (watch)
+ if (r->watch)
list_del(&r->rlist);
list_del_rcu(&entry->list);
list_del(&r->list);
} else {
- if (watch) {
- list_add(&nentry->rule.rlist, audit_watch_rules(watch));
- list_del(&r->rlist);
- } else if (tree)
+ if (r->watch || r->tree)
list_replace_init(&r->rlist, &nentry->rule.rlist);
list_replace_rcu(&entry->list, &nentry->list);
list_replace(&r->list, &nentry->rule.list);
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 3828ad5fb8f16..240063c370e68 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -549,9 +549,8 @@ static int audit_filter_rules(struct task_struct *tsk,
}
break;
case AUDIT_WATCH:
- if (name && audit_watch_inode(rule->watch) != (unsigned long)-1)
- result = (name->dev == audit_watch_dev(rule->watch) &&
- name->ino == audit_watch_inode(rule->watch));
+ if (name)
+ result = audit_watch_compare(rule->watch, name->ino, name->dev);
break;
case AUDIT_DIR:
if (ctx)
--
GitLab
From e9fd702a58c49dbb14481dca88dad44758da393a Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:04 -0500
Subject: [PATCH 047/863] audit: convert audit watches to use fsnotify instead
of inotify
Audit currently uses inotify to pin inodes in core and to detect when
watched inodes are deleted or unmounted. This patch uses fsnotify instead
of inotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
include/linux/fsnotify_backend.h | 5 +-
kernel/audit_watch.c | 208 ++++++++++++++++++++++---------
2 files changed, 152 insertions(+), 61 deletions(-)
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 4d6f47b511897..8f8341e9f0212 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -58,9 +58,12 @@
FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE |\
FS_DELETE)
+#define FS_MOVE (FS_MOVED_FROM | FS_MOVED_TO)
+
/* listeners that hard code group numbers near the top */
#define DNOTIFY_GROUP_NUM UINT_MAX
-#define INOTIFY_GROUP_NUM (DNOTIFY_GROUP_NUM-1)
+#define AUDIT_WATCH_GROUP_NUM (DNOTIFY_GROUP_NUM-1)
+#define INOTIFY_GROUP_NUM (AUDIT_WATCH_GROUP_NUM-1)
struct fsnotify_group;
struct fsnotify_event;
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index c2ca7168bfd1f..ff5be849473dc 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -24,18 +24,18 @@
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/fs.h>
+#include <linux/fsnotify_backend.h>
#include <linux/namei.h>
#include <linux/netlink.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/inotify.h>
#include <linux/security.h>
#include "audit.h"
/*
* Reference counting:
*
- * audit_parent: lifetime is from audit_init_parent() to receipt of an IN_IGNORED
+ * audit_parent: lifetime is from audit_init_parent() to receipt of an FS_IGNORED
* event. Each audit_watch holds a reference to its associated parent.
*
* audit_watch: if added to lists, lifetime is from audit_init_watch() to
@@ -57,26 +57,27 @@ struct audit_watch {
struct audit_parent {
struct list_head ilist; /* tmp list used to free parents */
struct list_head watches; /* anchor for audit_watch->wlist */
- struct inotify_watch wdata; /* inotify watch data */
+ struct fsnotify_mark_entry mark; /* fsnotify mark on the inode */
unsigned flags; /* status flags */
};
-/* Inotify handle. */
-struct inotify_handle *audit_ih;
+/* fsnotify handle. */
+struct fsnotify_group *audit_watch_group;
/*
* audit_parent status flags:
*
* AUDIT_PARENT_INVALID - set anytime rules/watches are auto-removed due to
* a filesystem event to ensure we're adding audit watches to a valid parent.
- * Technically not needed for IN_DELETE_SELF or IN_UNMOUNT events, as we cannot
- * receive them while we have nameidata, but must be used for IN_MOVE_SELF which
+ * Technically not needed for FS_DELETE_SELF or FS_UNMOUNT events, as we cannot
+ * receive them while we have nameidata, but must be used for FS_MOVE_SELF which
* we can receive while holding nameidata.
*/
#define AUDIT_PARENT_INVALID 0x001
-/* Inotify events we care about. */
-#define AUDIT_IN_WATCH IN_MOVE|IN_CREATE|IN_DELETE|IN_DELETE_SELF|IN_MOVE_SELF
+/* fsnotify events we care about. */
+#define AUDIT_FS_WATCH (FS_MOVE | FS_CREATE | FS_DELETE | FS_DELETE_SELF |\
+ FS_MOVE_SELF | FS_EVENT_ON_CHILD)
static void audit_free_parent(struct audit_parent *parent)
{
@@ -84,14 +85,45 @@ static void audit_free_parent(struct audit_parent *parent)
kfree(parent);
}
-static void audit_destroy_watch(struct inotify_watch *i_watch)
+static void audit_watch_free_mark(struct fsnotify_mark_entry *entry)
{
struct audit_parent *parent;
- parent = container_of(i_watch, struct audit_parent, wdata);
+ parent = container_of(entry, struct audit_parent, mark);
audit_free_parent(parent);
}
+static void audit_get_parent(struct audit_parent *parent)
+{
+ if (likely(parent))
+ fsnotify_get_mark(&parent->mark);
+}
+
+static void audit_put_parent(struct audit_parent *parent)
+{
+ if (likely(parent))
+ fsnotify_put_mark(&parent->mark);
+}
+
+/*
+ * Find and return the audit_parent on the given inode. If found a reference
+ * is taken on this parent.
+ */
+static inline struct audit_parent *audit_find_parent(struct inode *inode)
+{
+ struct audit_parent *parent = NULL;
+ struct fsnotify_mark_entry *entry;
+
+ spin_lock(&inode->i_lock);
+ entry = fsnotify_find_mark_entry(audit_watch_group, inode);
+ spin_unlock(&inode->i_lock);
+
+ if (entry)
+ parent = container_of(entry, struct audit_parent, mark);
+
+ return parent;
+}
+
void audit_get_watch(struct audit_watch *watch)
{
atomic_inc(&watch->count);
@@ -110,7 +142,7 @@ void audit_put_watch(struct audit_watch *watch)
void audit_remove_watch(struct audit_watch *watch)
{
list_del(&watch->wlist);
- put_inotify_watch(&watch->parent->wdata);
+ audit_put_parent(watch->parent);
watch->parent = NULL;
audit_put_watch(watch); /* match initial get */
}
@@ -130,8 +162,9 @@ int audit_watch_compare(struct audit_watch *watch, unsigned long ino, dev_t dev)
/* Initialize a parent watch entry. */
static struct audit_parent *audit_init_parent(struct nameidata *ndp)
{
+ struct inode *inode = ndp->path.dentry->d_inode;
struct audit_parent *parent;
- s32 wd;
+ int ret;
parent = kzalloc(sizeof(*parent), GFP_KERNEL);
if (unlikely(!parent))
@@ -140,14 +173,14 @@ static struct audit_parent *audit_init_parent(struct nameidata *ndp)
INIT_LIST_HEAD(&parent->watches);
parent->flags = 0;
- inotify_init_watch(&parent->wdata);
- /* grab a ref so inotify watch hangs around until we take audit_filter_mutex */
- get_inotify_watch(&parent->wdata);
- wd = inotify_add_watch(audit_ih, &parent->wdata,
- ndp->path.dentry->d_inode, AUDIT_IN_WATCH);
- if (wd < 0) {
+ fsnotify_init_mark(&parent->mark, audit_watch_free_mark);
+ parent->mark.mask = AUDIT_FS_WATCH;
+ /* grab a ref so fsnotify mark hangs around until we take audit_filter_mutex */
+ audit_get_parent(parent);
+ ret = fsnotify_add_mark(&parent->mark, audit_watch_group, inode);
+ if (ret < 0) {
audit_free_parent(parent);
- return ERR_PTR(wd);
+ return ERR_PTR(ret);
}
return parent;
@@ -176,7 +209,7 @@ int audit_to_watch(struct audit_krule *krule, char *path, int len, u32 op)
{
struct audit_watch *watch;
- if (!audit_ih)
+ if (!audit_watch_group)
return -EOPNOTSUPP;
if (path[0] != '/' || path[len-1] == '/' ||
@@ -214,7 +247,7 @@ static struct audit_watch *audit_dupe_watch(struct audit_watch *old)
new->dev = old->dev;
new->ino = old->ino;
- get_inotify_watch(&old->parent->wdata);
+ audit_get_parent(old->parent);
new->parent = old->parent;
out:
@@ -335,19 +368,21 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
audit_remove_watch(w);
}
mutex_unlock(&audit_filter_mutex);
+
+ fsnotify_destroy_mark_by_entry(&parent->mark);
}
/* Unregister inotify watches for parents on in_list.
- * Generates an IN_IGNORED event. */
+ * Generates an FS_IGNORED event. */
void audit_watch_inotify_unregister(struct list_head *in_list)
{
struct audit_parent *p, *n;
list_for_each_entry_safe(p, n, in_list, ilist) {
list_del(&p->ilist);
- inotify_rm_watch(audit_ih, &p->wdata);
- /* the unpin matching the pin in audit_remove_watch_rule() */
- unpin_inotify_watch(&p->wdata);
+ fsnotify_destroy_mark_by_entry(&p->mark);
+ /* matches the get in audit_remove_watch_rule() */
+ audit_put_parent(p);
}
}
@@ -399,7 +434,7 @@ static void audit_put_nd(struct nameidata *ndp, struct nameidata *ndw)
}
}
-/* Associate the given rule with an existing parent inotify_watch.
+/* Associate the given rule with an existing parent.
* Caller must hold audit_filter_mutex. */
static void audit_add_to_parent(struct audit_krule *krule,
struct audit_parent *parent)
@@ -407,6 +442,8 @@ static void audit_add_to_parent(struct audit_krule *krule,
struct audit_watch *w, *watch = krule->watch;
int watch_found = 0;
+ BUG_ON(!mutex_is_locked(&audit_filter_mutex));
+
list_for_each_entry(w, &parent->watches, wlist) {
if (strcmp(watch->path, w->path))
continue;
@@ -423,7 +460,7 @@ static void audit_add_to_parent(struct audit_krule *krule,
}
if (!watch_found) {
- get_inotify_watch(&parent->wdata);
+ audit_get_parent(parent);
watch->parent = parent;
list_add(&watch->wlist, &parent->watches);
@@ -436,7 +473,6 @@ static void audit_add_to_parent(struct audit_krule *krule,
int audit_add_watch(struct audit_krule *krule, struct list_head **list)
{
struct audit_watch *watch = krule->watch;
- struct inotify_watch *i_watch;
struct audit_parent *parent;
struct nameidata *ndp = NULL, *ndw = NULL;
int h, ret = 0;
@@ -462,8 +498,8 @@ int audit_add_watch(struct audit_krule *krule, struct list_head **list)
* inotify watch is found, inotify_find_watch() grabs a reference before
* returning.
*/
- if (inotify_find_watch(audit_ih, ndp->path.dentry->d_inode,
- &i_watch) < 0) {
+ parent = audit_find_parent(ndp->path.dentry->d_inode);
+ if (!parent) {
parent = audit_init_parent(ndp);
if (IS_ERR(parent)) {
/* caller expects mutex locked */
@@ -471,8 +507,7 @@ int audit_add_watch(struct audit_krule *krule, struct list_head **list)
ret = PTR_ERR(parent);
goto error;
}
- } else
- parent = container_of(i_watch, struct audit_parent, wdata);
+ }
mutex_lock(&audit_filter_mutex);
@@ -482,8 +517,8 @@ int audit_add_watch(struct audit_krule *krule, struct list_head **list)
else
audit_add_to_parent(krule, parent);
- /* match get in audit_init_parent or inotify_find_watch */
- put_inotify_watch(&parent->wdata);
+ /* match get in audit_find_parent or audit_init_parent */
+ audit_put_parent(parent);
h = audit_hash_ino((u32)watch->ino);
*list = &audit_inode_hash[h];
@@ -504,52 +539,105 @@ void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list)
audit_remove_watch(watch);
if (list_empty(&parent->watches)) {
- /* Put parent on the inotify un-registration
- * list. Grab a reference before releasing
+ /* Put parent on the un-registration list.
+ * Grab a reference before releasing
* audit_filter_mutex, to be released in
- * audit_inotify_unregister().
+ * audit_watch_inotify_unregister().
* If filesystem is going away, just leave
* the sucker alone, eviction will take
* care of it. */
- if (pin_inotify_watch(&parent->wdata))
- list_add(&parent->ilist, list);
+ audit_get_parent(parent);
+ list_add(&parent->ilist, list);
}
}
}
-/* Update watch data in audit rules based on inotify events. */
-static void audit_handle_ievent(struct inotify_watch *i_watch, u32 wd, u32 mask,
- u32 cookie, const char *dname, struct inode *inode)
+static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
{
+ struct fsnotify_mark_entry *entry;
+ bool send;
+
+ spin_lock(&inode->i_lock);
+ entry = fsnotify_find_mark_entry(group, inode);
+ spin_unlock(&inode->i_lock);
+ if (!entry)
+ return false;
+
+ mask = (mask & ~FS_EVENT_ON_CHILD);
+ send = (entry->mask & mask);
+
+ /* find took a reference */
+ fsnotify_put_mark(entry);
+
+ return send;
+}
+
+/* Update watch data in audit rules based on fsnotify events. */
+static int audit_watch_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+{
+ struct inode *inode;
+ __u32 mask = event->mask;
+ const char *dname = event->file_name;
struct audit_parent *parent;
- parent = container_of(i_watch, struct audit_parent, wdata);
+ BUG_ON(group != audit_watch_group);
+
+ parent = audit_find_parent(event->to_tell);
+ if (unlikely(!parent))
+ return 0;
+
+ switch (event->data_type) {
+ case (FSNOTIFY_EVENT_PATH):
+ inode = event->path.dentry->d_inode;
+ break;
+ case (FSNOTIFY_EVENT_INODE):
+ inode = event->inode;
+ break;
+ default:
+ BUG();
+ inode = NULL;
+ break;
+ };
- if (mask & (IN_CREATE|IN_MOVED_TO) && inode)
+ if (mask & (FS_CREATE|FS_MOVED_TO) && inode)
audit_update_watch(parent, dname, inode->i_sb->s_dev, inode->i_ino, 0);
- else if (mask & (IN_DELETE|IN_MOVED_FROM))
+ else if (mask & (FS_DELETE|FS_MOVED_FROM))
audit_update_watch(parent, dname, (dev_t)-1, (unsigned long)-1, 1);
- /* inotify automatically removes the watch and sends IN_IGNORED */
- else if (mask & (IN_DELETE_SELF|IN_UNMOUNT))
+ else if (mask & (FS_DELETE_SELF|FS_UNMOUNT|FS_MOVE_SELF))
audit_remove_parent_watches(parent);
- /* inotify does not remove the watch, so remove it manually */
- else if(mask & IN_MOVE_SELF) {
- audit_remove_parent_watches(parent);
- inotify_remove_watch_locked(audit_ih, i_watch);
- } else if (mask & IN_IGNORED)
- put_inotify_watch(i_watch);
+ /* moved put_inotify_watch to freeing mark */
+
+ /* matched the ref taken by audit_find_parent */
+ audit_put_parent(parent);
+
+ return 0;
+}
+
+static void audit_watch_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+{
+ struct audit_parent *parent;
+
+ parent = container_of(entry, struct audit_parent, mark);
+ /* taken from audit_handle_ievent & FS_IGNORED please figure out what I match... */
+ audit_put_parent(parent);
}
-static const struct inotify_operations audit_inotify_ops = {
- .handle_event = audit_handle_ievent,
- .destroy_watch = audit_destroy_watch,
+static const struct fsnotify_ops audit_watch_fsnotify_ops = {
+ .should_send_event = audit_watch_should_send_event,
+ .handle_event = audit_watch_handle_event,
+ .free_group_priv = NULL,
+ .freeing_mark = audit_watch_freeing_mark,
+ .free_event_priv = NULL,
};
static int __init audit_watch_init(void)
{
- audit_ih = inotify_init(&audit_inotify_ops);
- if (IS_ERR(audit_ih))
- audit_panic("cannot initialize inotify handle");
+ audit_watch_group = fsnotify_obtain_group(AUDIT_WATCH_GROUP_NUM, AUDIT_FS_WATCH,
+ &audit_watch_fsnotify_ops);
+ if (IS_ERR(audit_watch_group)) {
+ audit_watch_group = NULL;
+ audit_panic("cannot create audit fsnotify group");
+ }
return 0;
}
subsys_initcall(audit_watch_init);
--
GitLab
From e118e9c5638bbe877aa26b5cd2fd223cc24cdc8a Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:04 -0500
Subject: [PATCH 048/863] audit: redo audit watch locking and refcnt in light
of fsnotify
fsnotify can handle mutexes to be held across all fsnotify operations since
it deals strickly in spinlocks. This can simplify and reduce some of the
audit_filter_mutex taking and dropping.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
kernel/audit_watch.c | 45 +++++---------------------------------------
1 file changed, 5 insertions(+), 40 deletions(-)
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index ff5be849473dc..da66197e3abc5 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -58,23 +58,11 @@ struct audit_parent {
struct list_head ilist; /* tmp list used to free parents */
struct list_head watches; /* anchor for audit_watch->wlist */
struct fsnotify_mark_entry mark; /* fsnotify mark on the inode */
- unsigned flags; /* status flags */
};
/* fsnotify handle. */
struct fsnotify_group *audit_watch_group;
-/*
- * audit_parent status flags:
- *
- * AUDIT_PARENT_INVALID - set anytime rules/watches are auto-removed due to
- * a filesystem event to ensure we're adding audit watches to a valid parent.
- * Technically not needed for FS_DELETE_SELF or FS_UNMOUNT events, as we cannot
- * receive them while we have nameidata, but must be used for FS_MOVE_SELF which
- * we can receive while holding nameidata.
- */
-#define AUDIT_PARENT_INVALID 0x001
-
/* fsnotify events we care about. */
#define AUDIT_FS_WATCH (FS_MOVE | FS_CREATE | FS_DELETE | FS_DELETE_SELF |\
FS_MOVE_SELF | FS_EVENT_ON_CHILD)
@@ -171,12 +159,9 @@ static struct audit_parent *audit_init_parent(struct nameidata *ndp)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&parent->watches);
- parent->flags = 0;
fsnotify_init_mark(&parent->mark, audit_watch_free_mark);
parent->mark.mask = AUDIT_FS_WATCH;
- /* grab a ref so fsnotify mark hangs around until we take audit_filter_mutex */
- audit_get_parent(parent);
ret = fsnotify_add_mark(&parent->mark, audit_watch_group, inode);
if (ret < 0) {
audit_free_parent(parent);
@@ -355,7 +340,6 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
struct audit_entry *e;
mutex_lock(&audit_filter_mutex);
- parent->flags |= AUDIT_PARENT_INVALID;
list_for_each_entry_safe(w, nextw, &parent->watches, wlist) {
list_for_each_entry_safe(r, nextr, &w->rules, rlist) {
e = container_of(r, struct audit_entry, rule);
@@ -487,35 +471,25 @@ int audit_add_watch(struct audit_krule *krule, struct list_head **list)
goto error;
}
+ mutex_lock(&audit_filter_mutex);
+
/* update watch filter fields */
if (ndw) {
watch->dev = ndw->path.dentry->d_inode->i_sb->s_dev;
watch->ino = ndw->path.dentry->d_inode->i_ino;
}
- /* The audit_filter_mutex must not be held during inotify calls because
- * we hold it during inotify event callback processing. If an existing
- * inotify watch is found, inotify_find_watch() grabs a reference before
- * returning.
- */
+ /* either find an old parent or attach a new one */
parent = audit_find_parent(ndp->path.dentry->d_inode);
if (!parent) {
parent = audit_init_parent(ndp);
if (IS_ERR(parent)) {
- /* caller expects mutex locked */
- mutex_lock(&audit_filter_mutex);
ret = PTR_ERR(parent);
goto error;
}
}
- mutex_lock(&audit_filter_mutex);
-
- /* parent was moved before we took audit_filter_mutex */
- if (parent->flags & AUDIT_PARENT_INVALID)
- ret = -ENOENT;
- else
- audit_add_to_parent(krule, parent);
+ audit_add_to_parent(krule, parent);
/* match get in audit_find_parent or audit_init_parent */
audit_put_parent(parent);
@@ -613,20 +587,11 @@ static int audit_watch_handle_event(struct fsnotify_group *group, struct fsnotif
return 0;
}
-static void audit_watch_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
-{
- struct audit_parent *parent;
-
- parent = container_of(entry, struct audit_parent, mark);
- /* taken from audit_handle_ievent & FS_IGNORED please figure out what I match... */
- audit_put_parent(parent);
-}
-
static const struct fsnotify_ops audit_watch_fsnotify_ops = {
.should_send_event = audit_watch_should_send_event,
.handle_event = audit_watch_handle_event,
.free_group_priv = NULL,
- .freeing_mark = audit_watch_freeing_mark,
+ .freeing_mark = NULL,
.free_event_priv = NULL,
};
--
GitLab
From a05fb6cc573130915380e00d182a4c6571cec6b2 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:05 -0500
Subject: [PATCH 049/863] audit: do not get and put just to free a watch
deleting audit watch rules is not currently done under audit_filter_mutex.
It was done this way because we could not hold the mutex during inotify
manipulation. Since we are using fsnotify we don't need to do the extra
get/put pair nor do we need the private list on which to store the parents
while they are about to be freed.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
kernel/audit.h | 3 +--
kernel/audit_watch.c | 27 +++------------------------
kernel/auditfilter.c | 6 +-----
3 files changed, 5 insertions(+), 31 deletions(-)
diff --git a/kernel/audit.h b/kernel/audit.h
index 82c8a09099f43..100b454a7354e 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -108,8 +108,7 @@ extern void audit_put_watch(struct audit_watch *watch);
extern void audit_get_watch(struct audit_watch *watch);
extern int audit_to_watch(struct audit_krule *krule, char *path, int len, u32 op);
extern int audit_add_watch(struct audit_krule *krule, struct list_head **list);
-extern void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list);
-extern void audit_watch_inotify_unregister(struct list_head *in_list);
+extern void audit_remove_watch_rule(struct audit_krule *krule);
extern char *audit_watch_path(struct audit_watch *watch);
extern int audit_watch_compare(struct audit_watch *watch, unsigned long ino, dev_t dev);
extern struct audit_entry *audit_dupe_rule(struct audit_krule *old);
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index da66197e3abc5..75ab53987ece1 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -55,7 +55,6 @@ struct audit_watch {
};
struct audit_parent {
- struct list_head ilist; /* tmp list used to free parents */
struct list_head watches; /* anchor for audit_watch->wlist */
struct fsnotify_mark_entry mark; /* fsnotify mark on the inode */
};
@@ -356,20 +355,6 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
fsnotify_destroy_mark_by_entry(&parent->mark);
}
-/* Unregister inotify watches for parents on in_list.
- * Generates an FS_IGNORED event. */
-void audit_watch_inotify_unregister(struct list_head *in_list)
-{
- struct audit_parent *p, *n;
-
- list_for_each_entry_safe(p, n, in_list, ilist) {
- list_del(&p->ilist);
- fsnotify_destroy_mark_by_entry(&p->mark);
- /* matches the get in audit_remove_watch_rule() */
- audit_put_parent(p);
- }
-}
-
/* Get path information necessary for adding watches. */
static int audit_get_nd(char *path, struct nameidata **ndp, struct nameidata **ndw)
{
@@ -502,7 +487,7 @@ int audit_add_watch(struct audit_krule *krule, struct list_head **list)
}
-void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list)
+void audit_remove_watch_rule(struct audit_krule *krule)
{
struct audit_watch *watch = krule->watch;
struct audit_parent *parent = watch->parent;
@@ -513,15 +498,9 @@ void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list)
audit_remove_watch(watch);
if (list_empty(&parent->watches)) {
- /* Put parent on the un-registration list.
- * Grab a reference before releasing
- * audit_filter_mutex, to be released in
- * audit_watch_inotify_unregister().
- * If filesystem is going away, just leave
- * the sucker alone, eviction will take
- * care of it. */
audit_get_parent(parent);
- list_add(&parent->ilist, list);
+ fsnotify_destroy_mark_by_entry(&parent->mark);
+ audit_put_parent(parent);
}
}
}
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index ac87577f36b5d..eb7675499fb5d 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -945,7 +945,6 @@ static inline int audit_del_rule(struct audit_entry *entry)
struct audit_watch *watch = entry->rule.watch;
struct audit_tree *tree = entry->rule.tree;
struct list_head *list;
- LIST_HEAD(inotify_unregister_list);
int ret = 0;
#ifdef CONFIG_AUDITSYSCALL
int dont_count = 0;
@@ -965,7 +964,7 @@ static inline int audit_del_rule(struct audit_entry *entry)
}
if (e->rule.watch)
- audit_remove_watch_rule(&e->rule, &inotify_unregister_list);
+ audit_remove_watch_rule(&e->rule);
if (e->rule.tree)
audit_remove_tree_rule(&e->rule);
@@ -983,9 +982,6 @@ static inline int audit_del_rule(struct audit_entry *entry)
#endif
mutex_unlock(&audit_filter_mutex);
- if (!list_empty(&inotify_unregister_list))
- audit_watch_inotify_unregister(&inotify_unregister_list);
-
out:
if (watch)
audit_put_watch(watch); /* match initial get */
--
GitLab
From 9e1c74321d87a8b079f04d89e750b39a43365e1f Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:05 -0500
Subject: [PATCH 050/863] fsnotify: duplicate fsnotify_mark_entry data between
2 marks
Simple copy fsnotify information from one mark to another in preparation
for the second mark to replace the first.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inode_mark.c | 10 +++++++++-
include/linux/fsnotify_backend.h | 2 ++
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 0399bcbe09c83..a13cf9e9233af 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -282,12 +282,20 @@ struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *grou
return NULL;
}
+void fsnotify_duplicate_mark(struct fsnotify_mark_entry *new, struct fsnotify_mark_entry *old)
+{
+ assert_spin_locked(&old->lock);
+ new->inode = old->inode;
+ new->group = old->group;
+ new->mask = old->mask;
+ new->free_mark = old->free_mark;
+}
+
/*
* Nothing fancy, just initialize lists and locks and counters.
*/
void fsnotify_init_mark(struct fsnotify_mark_entry *entry,
void (*free_mark)(struct fsnotify_mark_entry *entry))
-
{
spin_lock_init(&entry->lock);
atomic_set(&entry->refcnt, 1);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 8f8341e9f0212..390516732956b 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -342,6 +342,8 @@ extern void fsnotify_recalc_inode_mask(struct inode *inode);
extern void fsnotify_init_mark(struct fsnotify_mark_entry *entry, void (*free_mark)(struct fsnotify_mark_entry *entry));
/* find (and take a reference) to a mark associated with group and inode */
extern struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group, struct inode *inode);
+/* copy the values from old into new */
+extern void fsnotify_duplicate_mark(struct fsnotify_mark_entry *new, struct fsnotify_mark_entry *old);
/* attach the mark to both the group and the inode */
extern int fsnotify_add_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group, struct inode *inode);
/* given a mark, flag it to be freed when all references are dropped */
--
GitLab
From 40554c3dae83bd892b7fbfaa2ea9de739cbcf065 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:05 -0500
Subject: [PATCH 051/863] fsnotify: allow addition of duplicate fsnotify marks
This patch allows a task to add a second fsnotify mark to an inode for the
same group. This mark will be added to the end of the inode's list and
this will never be found by the stand fsnotify_find_mark() function. This
is useful if a user wants to add a new mark before removing the old one.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 2 +-
fs/notify/inode_mark.c | 8 +++++---
fs/notify/inotify/inotify_user.c | 2 +-
include/linux/fsnotify_backend.h | 2 +-
kernel/audit_watch.c | 2 +-
5 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 7e54e52964dd7..85b97fca14de3 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -362,7 +362,7 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
spin_lock(&entry->lock);
} else {
- fsnotify_add_mark(new_entry, dnotify_group, inode);
+ fsnotify_add_mark(new_entry, dnotify_group, inode, 0);
spin_lock(&new_entry->lock);
entry = new_entry;
dnentry = new_dnentry;
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index a13cf9e9233af..7d2962e5328ee 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -312,9 +312,10 @@ void fsnotify_init_mark(struct fsnotify_mark_entry *entry,
* event types should be delivered to which group and for which inodes.
*/
int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
- struct fsnotify_group *group, struct inode *inode)
+ struct fsnotify_group *group, struct inode *inode,
+ int allow_dups)
{
- struct fsnotify_mark_entry *lentry;
+ struct fsnotify_mark_entry *lentry = NULL;
int ret = 0;
inode = igrab(inode);
@@ -331,7 +332,8 @@ int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
- lentry = fsnotify_find_mark_entry(group, inode);
+ if (!allow_dups)
+ lentry = fsnotify_find_mark_entry(group, inode);
if (!lentry) {
entry->group = group;
entry->inode = inode;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 653c507b1bb37..f22a04005db21 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -651,7 +651,7 @@ static int inotify_new_watch(struct fsnotify_group *group,
goto out_err;
/* we are on the idr, now get on the inode */
- ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+ ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode, 0);
if (ret) {
/* we failed to get on the inode, get off the idr */
inotify_remove_from_idr(group, tmp_ientry);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 390516732956b..1679f250d59ea 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -345,7 +345,7 @@ extern struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_grou
/* copy the values from old into new */
extern void fsnotify_duplicate_mark(struct fsnotify_mark_entry *new, struct fsnotify_mark_entry *old);
/* attach the mark to both the group and the inode */
-extern int fsnotify_add_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group, struct inode *inode);
+extern int fsnotify_add_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group, struct inode *inode, int allow_dups);
/* given a mark, flag it to be freed when all references are dropped */
extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry);
/* run all the marks in a group, and flag them to be freed */
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 75ab53987ece1..c44de0c4fc474 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -161,7 +161,7 @@ static struct audit_parent *audit_init_parent(struct nameidata *ndp)
fsnotify_init_mark(&parent->mark, audit_watch_free_mark);
parent->mark.mask = AUDIT_FS_WATCH;
- ret = fsnotify_add_mark(&parent->mark, audit_watch_group, inode);
+ ret = fsnotify_add_mark(&parent->mark, audit_watch_group, inode, 0);
if (ret < 0) {
audit_free_parent(parent);
return ERR_PTR(ret);
--
GitLab
From 28a3a7eb3b1f3e7d834e19f06e794e429058a4dd Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:05 -0500
Subject: [PATCH 052/863] audit: reimplement audit_trees using fsnotify rather
than inotify
Simply switch audit_trees from using inotify to using fsnotify for it's
inode pinning and disappearing act information.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
include/linux/fsnotify_backend.h | 5 +-
init/Kconfig | 2 +-
kernel/audit_tree.c | 234 +++++++++++++++++--------------
kernel/auditsc.c | 4 +-
4 files changed, 136 insertions(+), 109 deletions(-)
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 1679f250d59ea..e252843710208 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -62,8 +62,9 @@
/* listeners that hard code group numbers near the top */
#define DNOTIFY_GROUP_NUM UINT_MAX
-#define AUDIT_WATCH_GROUP_NUM (DNOTIFY_GROUP_NUM-1)
-#define INOTIFY_GROUP_NUM (AUDIT_WATCH_GROUP_NUM-1)
+#define AUDIT_WATCH_GROUP_NUM (DNOTIFY_GROUP_NUM-1)
+#define AUDIT_TREE_GROUP_NUM (AUDIT_WATCH_GROUP_NUM-1)
+#define INOTIFY_GROUP_NUM (AUDIT_TREE_GROUP_NUM-1)
struct fsnotify_group;
struct fsnotify_event;
diff --git a/init/Kconfig b/init/Kconfig
index 5cff9a980c397..84e33c49a0cb9 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -326,7 +326,7 @@ config AUDITSYSCALL
config AUDIT_TREE
def_bool y
depends on AUDITSYSCALL
- select INOTIFY
+ select FSNOTIFY
menu "RCU Subsystem"
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 46a57b57a3352..a164600dd82ef 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -1,5 +1,5 @@
#include "audit.h"
-#include <linux/inotify.h>
+#include <linux/fsnotify_backend.h>
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/kthread.h>
@@ -22,7 +22,7 @@ struct audit_tree {
struct audit_chunk {
struct list_head hash;
- struct inotify_watch watch;
+ struct fsnotify_mark_entry mark;
struct list_head trees; /* with root here */
int dead;
int count;
@@ -59,7 +59,7 @@ static LIST_HEAD(prune_list);
* tree is refcounted; one reference for "some rules on rules_list refer to
* it", one for each chunk with pointer to it.
*
- * chunk is refcounted by embedded inotify_watch + .refs (non-zero refcount
+ * chunk is refcounted by embedded fsnotify_mark + .refs (non-zero refcount
* of watch contributes 1 to .refs).
*
* node.index allows to get from node.list to containing chunk.
@@ -68,7 +68,7 @@ static LIST_HEAD(prune_list);
* that makes a difference. Some.
*/
-static struct inotify_handle *rtree_ih;
+static struct fsnotify_group *audit_tree_group;
static struct audit_tree *alloc_tree(const char *s)
{
@@ -111,29 +111,6 @@ const char *audit_tree_path(struct audit_tree *tree)
return tree->pathname;
}
-static struct audit_chunk *alloc_chunk(int count)
-{
- struct audit_chunk *chunk;
- size_t size;
- int i;
-
- size = offsetof(struct audit_chunk, owners) + count * sizeof(struct node);
- chunk = kzalloc(size, GFP_KERNEL);
- if (!chunk)
- return NULL;
-
- INIT_LIST_HEAD(&chunk->hash);
- INIT_LIST_HEAD(&chunk->trees);
- chunk->count = count;
- atomic_long_set(&chunk->refs, 1);
- for (i = 0; i < count; i++) {
- INIT_LIST_HEAD(&chunk->owners[i].list);
- chunk->owners[i].index = i;
- }
- inotify_init_watch(&chunk->watch);
- return chunk;
-}
-
static void free_chunk(struct audit_chunk *chunk)
{
int i;
@@ -157,6 +134,35 @@ static void __put_chunk(struct rcu_head *rcu)
audit_put_chunk(chunk);
}
+static void audit_tree_destroy_watch(struct fsnotify_mark_entry *entry)
+{
+ struct audit_chunk *chunk = container_of(entry, struct audit_chunk, mark);
+ call_rcu(&chunk->head, __put_chunk);
+}
+
+static struct audit_chunk *alloc_chunk(int count)
+{
+ struct audit_chunk *chunk;
+ size_t size;
+ int i;
+
+ size = offsetof(struct audit_chunk, owners) + count * sizeof(struct node);
+ chunk = kzalloc(size, GFP_KERNEL);
+ if (!chunk)
+ return NULL;
+
+ INIT_LIST_HEAD(&chunk->hash);
+ INIT_LIST_HEAD(&chunk->trees);
+ chunk->count = count;
+ atomic_long_set(&chunk->refs, 1);
+ for (i = 0; i < count; i++) {
+ INIT_LIST_HEAD(&chunk->owners[i].list);
+ chunk->owners[i].index = i;
+ }
+ fsnotify_init_mark(&chunk->mark, audit_tree_destroy_watch);
+ return chunk;
+}
+
enum {HASH_SIZE = 128};
static struct list_head chunk_hash_heads[HASH_SIZE];
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(hash_lock);
@@ -167,10 +173,15 @@ static inline struct list_head *chunk_hash(const struct inode *inode)
return chunk_hash_heads + n % HASH_SIZE;
}
-/* hash_lock is held by caller */
+/* hash_lock & entry->lock is held by caller */
static void insert_hash(struct audit_chunk *chunk)
{
- struct list_head *list = chunk_hash(chunk->watch.inode);
+ struct fsnotify_mark_entry *entry = &chunk->mark;
+ struct list_head *list;
+
+ if (!entry->inode)
+ return;
+ list = chunk_hash(entry->inode);
list_add_rcu(&chunk->hash, list);
}
@@ -181,7 +192,8 @@ struct audit_chunk *audit_tree_lookup(const struct inode *inode)
struct audit_chunk *p;
list_for_each_entry_rcu(p, list, hash) {
- if (p->watch.inode == inode) {
+ /* mark.inode may have gone NULL, but who cares? */
+ if (p->mark.inode == inode) {
atomic_long_inc(&p->refs);
return p;
}
@@ -210,38 +222,19 @@ static struct audit_chunk *find_chunk(struct node *p)
static void untag_chunk(struct node *p)
{
struct audit_chunk *chunk = find_chunk(p);
+ struct fsnotify_mark_entry *entry = &chunk->mark;
struct audit_chunk *new;
struct audit_tree *owner;
int size = chunk->count - 1;
int i, j;
- if (!pin_inotify_watch(&chunk->watch)) {
- /*
- * Filesystem is shutting down; all watches are getting
- * evicted, just take it off the node list for this
- * tree and let the eviction logics take care of the
- * rest.
- */
- owner = p->owner;
- if (owner->root == chunk) {
- list_del_init(&owner->same_root);
- owner->root = NULL;
- }
- list_del_init(&p->list);
- p->owner = NULL;
- put_tree(owner);
- return;
- }
+ fsnotify_get_mark(entry);
spin_unlock(&hash_lock);
- /*
- * pin_inotify_watch() succeeded, so the watch won't go away
- * from under us.
- */
- mutex_lock(&chunk->watch.inode->inotify_mutex);
- if (chunk->dead) {
- mutex_unlock(&chunk->watch.inode->inotify_mutex);
+ spin_lock(&entry->lock);
+ if (chunk->dead || !entry->inode) {
+ spin_unlock(&entry->lock);
goto out;
}
@@ -256,16 +249,17 @@ static void untag_chunk(struct node *p)
list_del_init(&p->list);
list_del_rcu(&chunk->hash);
spin_unlock(&hash_lock);
- inotify_evict_watch(&chunk->watch);
- mutex_unlock(&chunk->watch.inode->inotify_mutex);
- put_inotify_watch(&chunk->watch);
+ spin_unlock(&entry->lock);
+ fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_put_mark(entry);
goto out;
}
new = alloc_chunk(size);
if (!new)
goto Fallback;
- if (inotify_clone_watch(&chunk->watch, &new->watch) < 0) {
+ fsnotify_duplicate_mark(&new->mark, entry);
+ if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.inode, 1)) {
free_chunk(new);
goto Fallback;
}
@@ -298,9 +292,9 @@ static void untag_chunk(struct node *p)
list_for_each_entry(owner, &new->trees, same_root)
owner->root = new;
spin_unlock(&hash_lock);
- inotify_evict_watch(&chunk->watch);
- mutex_unlock(&chunk->watch.inode->inotify_mutex);
- put_inotify_watch(&chunk->watch);
+ spin_unlock(&entry->lock);
+ fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_put_mark(entry);
goto out;
Fallback:
@@ -314,31 +308,33 @@ static void untag_chunk(struct node *p)
p->owner = NULL;
put_tree(owner);
spin_unlock(&hash_lock);
- mutex_unlock(&chunk->watch.inode->inotify_mutex);
+ spin_unlock(&entry->lock);
out:
- unpin_inotify_watch(&chunk->watch);
+ fsnotify_put_mark(entry);
spin_lock(&hash_lock);
}
static int create_chunk(struct inode *inode, struct audit_tree *tree)
{
+ struct fsnotify_mark_entry *entry;
struct audit_chunk *chunk = alloc_chunk(1);
if (!chunk)
return -ENOMEM;
- if (inotify_add_watch(rtree_ih, &chunk->watch, inode, IN_IGNORED | IN_DELETE_SELF) < 0) {
+ entry = &chunk->mark;
+ if (fsnotify_add_mark(entry, audit_tree_group, inode, 0)) {
free_chunk(chunk);
return -ENOSPC;
}
- mutex_lock(&inode->inotify_mutex);
+ spin_lock(&entry->lock);
spin_lock(&hash_lock);
if (tree->goner) {
spin_unlock(&hash_lock);
chunk->dead = 1;
- inotify_evict_watch(&chunk->watch);
- mutex_unlock(&inode->inotify_mutex);
- put_inotify_watch(&chunk->watch);
+ spin_unlock(&entry->lock);
+ fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_put_mark(entry);
return 0;
}
chunk->owners[0].index = (1U << 31);
@@ -351,30 +347,33 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree)
}
insert_hash(chunk);
spin_unlock(&hash_lock);
- mutex_unlock(&inode->inotify_mutex);
+ spin_unlock(&entry->lock);
return 0;
}
/* the first tagged inode becomes root of tree */
static int tag_chunk(struct inode *inode, struct audit_tree *tree)
{
- struct inotify_watch *watch;
+ struct fsnotify_mark_entry *old_entry, *chunk_entry;
struct audit_tree *owner;
struct audit_chunk *chunk, *old;
struct node *p;
int n;
- if (inotify_find_watch(rtree_ih, inode, &watch) < 0)
+ spin_lock(&inode->i_lock);
+ old_entry = fsnotify_find_mark_entry(audit_tree_group, inode);
+ spin_unlock(&inode->i_lock);
+ if (!old_entry)
return create_chunk(inode, tree);
- old = container_of(watch, struct audit_chunk, watch);
+ old = container_of(old_entry, struct audit_chunk, mark);
/* are we already there? */
spin_lock(&hash_lock);
for (n = 0; n < old->count; n++) {
if (old->owners[n].owner == tree) {
spin_unlock(&hash_lock);
- put_inotify_watch(&old->watch);
+ fsnotify_put_mark(old_entry);
return 0;
}
}
@@ -382,25 +381,44 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
chunk = alloc_chunk(old->count + 1);
if (!chunk) {
- put_inotify_watch(&old->watch);
+ fsnotify_put_mark(old_entry);
return -ENOMEM;
}
- mutex_lock(&inode->inotify_mutex);
- if (inotify_clone_watch(&old->watch, &chunk->watch) < 0) {
- mutex_unlock(&inode->inotify_mutex);
- put_inotify_watch(&old->watch);
+ chunk_entry = &chunk->mark;
+
+ spin_lock(&old_entry->lock);
+ if (!old_entry->inode) {
+ /* old_entry is being shot, lets just lie */
+ spin_unlock(&old_entry->lock);
+ fsnotify_put_mark(old_entry);
free_chunk(chunk);
+ return -ENOENT;
+ }
+
+ fsnotify_duplicate_mark(chunk_entry, old_entry);
+ if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->inode, 1)) {
+ spin_unlock(&old_entry->lock);
+ free_chunk(chunk);
+ fsnotify_put_mark(old_entry);
return -ENOSPC;
}
+
+ /* even though we hold old_entry->lock, this is safe since chunk_entry->lock could NEVER have been grabbed before */
+ spin_lock(&chunk_entry->lock);
spin_lock(&hash_lock);
+
+ /* we now hold old_entry->lock, chunk_entry->lock, and hash_lock */
if (tree->goner) {
spin_unlock(&hash_lock);
chunk->dead = 1;
- inotify_evict_watch(&chunk->watch);
- mutex_unlock(&inode->inotify_mutex);
- put_inotify_watch(&old->watch);
- put_inotify_watch(&chunk->watch);
+ spin_unlock(&chunk_entry->lock);
+ spin_unlock(&old_entry->lock);
+
+ fsnotify_destroy_mark_by_entry(chunk_entry);
+
+ fsnotify_put_mark(chunk_entry);
+ fsnotify_put_mark(old_entry);
return 0;
}
list_replace_init(&old->trees, &chunk->trees);
@@ -426,10 +444,11 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
list_add(&tree->same_root, &chunk->trees);
}
spin_unlock(&hash_lock);
- inotify_evict_watch(&old->watch);
- mutex_unlock(&inode->inotify_mutex);
- put_inotify_watch(&old->watch); /* pair to inotify_find_watch */
- put_inotify_watch(&old->watch); /* and kill it */
+ spin_unlock(&chunk_entry->lock);
+ spin_unlock(&old_entry->lock);
+ fsnotify_destroy_mark_by_entry(old_entry);
+ fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */
+ fsnotify_put_mark(old_entry); /* and kill it */
return 0;
}
@@ -584,7 +603,9 @@ void audit_trim_trees(void)
spin_lock(&hash_lock);
list_for_each_entry(node, &tree->chunks, list) {
- struct inode *inode = find_chunk(node)->watch.inode;
+ struct audit_chunk *chunk = find_chunk(node);
+ /* this could be NULL if the watch is dieing else where... */
+ struct inode *inode = chunk->mark.inode;
node->index |= 1U<<31;
if (iterate_mounts(compare_root, inode, root_mnt))
node->index &= ~(1U<<31);
@@ -846,7 +867,6 @@ void audit_kill_trees(struct list_head *list)
* Here comes the stuff asynchronous to auditctl operations
*/
-/* inode->inotify_mutex is locked */
static void evict_chunk(struct audit_chunk *chunk)
{
struct audit_tree *owner;
@@ -885,35 +905,41 @@ static void evict_chunk(struct audit_chunk *chunk)
mutex_unlock(&audit_filter_mutex);
}
-static void handle_event(struct inotify_watch *watch, u32 wd, u32 mask,
- u32 cookie, const char *dname, struct inode *inode)
+static int audit_tree_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
{
- struct audit_chunk *chunk = container_of(watch, struct audit_chunk, watch);
+ BUG();
+ return -EOPNOTSUPP;
+}
- if (mask & IN_IGNORED) {
- evict_chunk(chunk);
- put_inotify_watch(watch);
- }
+static void audit_tree_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+{
+ struct audit_chunk *chunk = container_of(entry, struct audit_chunk, mark);
+
+ evict_chunk(chunk);
+ fsnotify_put_mark(entry);
}
-static void destroy_watch(struct inotify_watch *watch)
+static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
{
- struct audit_chunk *chunk = container_of(watch, struct audit_chunk, watch);
- call_rcu(&chunk->head, __put_chunk);
+ return 0;
}
-static const struct inotify_operations rtree_inotify_ops = {
- .handle_event = handle_event,
- .destroy_watch = destroy_watch,
+static const struct fsnotify_ops audit_tree_ops = {
+ .handle_event = audit_tree_handle_event,
+ .should_send_event = audit_tree_send_event,
+ .free_group_priv = NULL,
+ .free_event_priv = NULL,
+ .freeing_mark = audit_tree_freeing_mark,
};
static int __init audit_tree_init(void)
{
int i;
- rtree_ih = inotify_init(&rtree_inotify_ops);
- if (IS_ERR(rtree_ih))
- audit_panic("cannot initialize inotify handle for rectree watches");
+ audit_tree_group = fsnotify_obtain_group(AUDIT_TREE_GROUP_NUM,
+ 0, &audit_tree_ops);
+ if (IS_ERR(audit_tree_group))
+ audit_panic("cannot initialize fsnotify group for rectree watches");
for (i = 0; i < HASH_SIZE; i++)
INIT_LIST_HEAD(&chunk_hash_heads[i]);
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 240063c370e68..786901cd82175 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1725,7 +1725,7 @@ static inline void handle_one(const struct inode *inode)
struct audit_tree_refs *p;
struct audit_chunk *chunk;
int count;
- if (likely(list_empty(&inode->inotify_watches)))
+ if (likely(hlist_empty(&inode->i_fsnotify_mark_entries)))
return;
context = current->audit_context;
p = context->trees;
@@ -1768,7 +1768,7 @@ static void handle_path(const struct dentry *dentry)
seq = read_seqbegin(&rename_lock);
for(;;) {
struct inode *inode = d->d_inode;
- if (inode && unlikely(!list_empty(&inode->inotify_watches))) {
+ if (inode && unlikely(!hlist_empty(&inode->i_fsnotify_mark_entries))) {
struct audit_chunk *chunk;
chunk = audit_tree_lookup(inode);
if (chunk) {
--
GitLab
From 67640b602f68332a83808426911636e9dbcc71fe Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:06 -0500
Subject: [PATCH 053/863] Audit: audit watches depend on fsnotify
CONFIG_AUDIT builds audit_watches which depend on fsnotify. Make
CONFIG_AUDIT select fsnotify.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
init/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/init/Kconfig b/init/Kconfig
index 84e33c49a0cb9..59f62548c2aaa 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -307,6 +307,7 @@ config TASK_IO_ACCOUNTING
config AUDIT
bool "Auditing support"
depends on NET
+ select FSNOTIFY
help
Enable auditing infrastructure that can be used with another
kernel subsystem, such as SELinux (which requires this for
@@ -320,8 +321,7 @@ config AUDITSYSCALL
help
Enable low-overhead system-call auditing infrastructure that
can be used independently or with another kernel subsystem,
- such as SELinux. To use audit's filesystem watch feature, please
- ensure that INOTIFY is configured.
+ such as SELinux.
config AUDIT_TREE
def_bool y
--
GitLab
From 939a67fc4cbab8ca11c90da8a769d7e965d66a9b Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:06 -0500
Subject: [PATCH 054/863] Audit: split audit watch Kconfig
Audit watch should depend on CONFIG_AUDIT_SYSCALL and should select
FSNOTIFY. This splits the spagetti like mixing of audit_watch and
audit_filter code so they can be configured seperately.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
init/Kconfig | 6 +++++-
kernel/Makefile | 5 +++--
kernel/audit.h | 14 +++++++++++++-
3 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/init/Kconfig b/init/Kconfig
index 59f62548c2aaa..05e932ef5169b 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -307,7 +307,6 @@ config TASK_IO_ACCOUNTING
config AUDIT
bool "Auditing support"
depends on NET
- select FSNOTIFY
help
Enable auditing infrastructure that can be used with another
kernel subsystem, such as SELinux (which requires this for
@@ -323,6 +322,11 @@ config AUDITSYSCALL
can be used independently or with another kernel subsystem,
such as SELinux.
+config AUDIT_WATCH
+ def_bool y
+ depends on AUDITSYSCALL
+ select FSNOTIFY
+
config AUDIT_TREE
def_bool y
depends on AUDITSYSCALL
diff --git a/kernel/Makefile b/kernel/Makefile
index 057472fbc272e..202df4ece6a5c 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -70,10 +70,11 @@ obj-$(CONFIG_IKCONFIG) += configs.o
obj-$(CONFIG_RESOURCE_COUNTERS) += res_counter.o
obj-$(CONFIG_SMP) += stop_machine.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
-obj-$(CONFIG_AUDIT) += audit.o auditfilter.o audit_watch.o
+obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
-obj-$(CONFIG_GCOV_KERNEL) += gcov/
+obj-$(CONFIG_AUDIT_WATCH) += audit_watch.o
obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
+obj-$(CONFIG_GCOV_KERNEL) += gcov/
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_KGDB) += debug/
obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
diff --git a/kernel/audit.h b/kernel/audit.h
index 100b454a7354e..f7206db4e13dd 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -103,7 +103,10 @@ extern struct mutex audit_filter_mutex;
extern void audit_free_rule_rcu(struct rcu_head *);
extern struct list_head audit_filter_list[];
+extern struct audit_entry *audit_dupe_rule(struct audit_krule *old);
+
/* audit watch functions */
+#ifdef CONFIG_AUDIT_WATCH
extern void audit_put_watch(struct audit_watch *watch);
extern void audit_get_watch(struct audit_watch *watch);
extern int audit_to_watch(struct audit_krule *krule, char *path, int len, u32 op);
@@ -111,7 +114,16 @@ extern int audit_add_watch(struct audit_krule *krule, struct list_head **list);
extern void audit_remove_watch_rule(struct audit_krule *krule);
extern char *audit_watch_path(struct audit_watch *watch);
extern int audit_watch_compare(struct audit_watch *watch, unsigned long ino, dev_t dev);
-extern struct audit_entry *audit_dupe_rule(struct audit_krule *old);
+#else
+#define audit_put_watch(w) {}
+#define audit_get_watch(w) {}
+#define audit_to_watch(k, p, l, o) (-EINVAL)
+#define audit_add_watch(k, l) (-EINVAL)
+#define audit_remove_watch_rule(k) BUG()
+#define audit_watch_path(w) ""
+#define audit_watch_compare(w, i, d) 0
+
+#endif /* CONFIG_AUDIT_WATCH */
#ifdef CONFIG_AUDIT_TREE
extern struct audit_chunk *audit_tree_lookup(const struct inode *);
--
GitLab
From 1a3aedbce416dfdbd5d5ac14a0edbcf21a62ee50 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:06 -0500
Subject: [PATCH 055/863] Audit: audit watch init should not be before fsnotify
init
Audit watch init and fsnotify init both use subsys_initcall() but since the
audit watch code is linked in before the fsnotify code the audit watch code
would be using the fsnotify srcu struct before it was initialized. This
patch fixes that problem by moving audit watch init to device_initcall() so
it happens after fsnotify is ready.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Paris <eparis@redhat.com>
Tested-by : Sachin Sant <sachinp@in.ibm.com>
---
kernel/audit_watch.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index c44de0c4fc474..f8543a41115b9 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -584,4 +584,4 @@ static int __init audit_watch_init(void)
}
return 0;
}
-subsys_initcall(audit_watch_init);
+device_initcall(audit_watch_init);
--
GitLab
From b4277d3dd5a7400c1ea7fd4e7d64bda8899f84f5 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:06 -0500
Subject: [PATCH 056/863] fsnotify: use fsnotify_create_event to allocate the
q_overflow event
Currently fsnotify defines a static fsnotify event which is sent when a
group overflows its allotted queue length. This patch just allocates that
event from the event cache rather than defining it statically. There is no
known reason that the current implementation is wrong, but this makes sure the
event is initialized and created like any other.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/notification.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index b8bf53b4c1089..8481253d64b54 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -56,7 +56,7 @@ static struct kmem_cache *fsnotify_event_holder_cachep;
* it is needed. It's refcnt is set 1 at kernel init time and will never
* get set to 0 so it will never get 'freed'
*/
-static struct fsnotify_event q_overflow_event;
+static struct fsnotify_event *q_overflow_event;
static atomic_t fsnotify_sync_cookie = ATOMIC_INIT(0);
/**
@@ -195,7 +195,7 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
mutex_lock(&group->notification_mutex);
if (group->q_len >= group->max_events) {
- event = &q_overflow_event;
+ event = q_overflow_event;
ret = -EOVERFLOW;
/* sorry, no private data on the overflow event */
priv = NULL;
@@ -412,8 +412,11 @@ __init int fsnotify_notification_init(void)
fsnotify_event_cachep = KMEM_CACHE(fsnotify_event, SLAB_PANIC);
fsnotify_event_holder_cachep = KMEM_CACHE(fsnotify_event_holder, SLAB_PANIC);
- initialize_event(&q_overflow_event);
- q_overflow_event.mask = FS_Q_OVERFLOW;
+ q_overflow_event = fsnotify_create_event(NULL, FS_Q_OVERFLOW, NULL,
+ FSNOTIFY_EVENT_NONE, NULL, 0,
+ GFP_KERNEL);
+ if (!q_overflow_event)
+ panic("unable to allocate fsnotify q_overflow_event\n");
return 0;
}
--
GitLab
From 31ddd3268dcb6c1d70e9930a83be43bf86e4bf17 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:06 -0500
Subject: [PATCH 057/863] inotify: use container_of instead of casting
inotify_free_mark casts directly from an fsnotify_mark_entry to an
inotify_inode_mark_entry. This works, but should use container_of instead
for future proofing.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_user.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index f22a04005db21..a0e40f7c9781c 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -550,7 +550,9 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
/* ding dong the mark is dead */
static void inotify_free_mark(struct fsnotify_mark_entry *entry)
{
- struct inotify_inode_mark_entry *ientry = (struct inotify_inode_mark_entry *)entry;
+ struct inotify_inode_mark_entry *ientry;
+
+ ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
kmem_cache_free(inotify_inode_mark_cachep, ientry);
}
--
GitLab
From f0553af054d31f48a75fddd3ef8beb5c39715019 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:06 -0500
Subject: [PATCH 058/863] fsnotify: kzalloc fsnotify groups
Use kzalloc for fsnotify_groups so that none of the fields can leak any
information accidentally.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/group.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 0e1677144bc54..777ca82122559 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -207,7 +207,7 @@ struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, __u32 mask,
struct fsnotify_group *group, *tgroup;
/* very low use, simpler locking if we just always alloc */
- group = kmalloc(sizeof(struct fsnotify_group), GFP_KERNEL);
+ group = kzalloc(sizeof(struct fsnotify_group), GFP_KERNEL);
if (!group)
return ERR_PTR(-ENOMEM);
--
GitLab
From 6f3a539e3bd8ed2eafa532443723d56896153a00 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:12:07 -0500
Subject: [PATCH 059/863] fsnotify: use kmem_cache_zalloc to simplify event
initialization
fsnotify event initialization is done entry by entry with almost everything
set to either 0 or NULL. Use kmem_cache_zalloc and only initialize things
that need non-zero initialization. Also means we don't have to change
initialization entries based on the config options.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/notification.c | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 8481253d64b54..b34ce7ad04091 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -314,25 +314,14 @@ void fsnotify_flush_notify(struct fsnotify_group *group)
static void initialize_event(struct fsnotify_event *event)
{
- event->holder.event = NULL;
INIT_LIST_HEAD(&event->holder.event_list);
atomic_set(&event->refcnt, 1);
spin_lock_init(&event->lock);
- event->path.dentry = NULL;
- event->path.mnt = NULL;
- event->inode = NULL;
event->data_type = FSNOTIFY_EVENT_NONE;
INIT_LIST_HEAD(&event->private_data_list);
-
- event->to_tell = NULL;
-
- event->file_name = NULL;
- event->name_len = 0;
-
- event->sync_cookie = 0;
}
/*
@@ -353,7 +342,7 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
{
struct fsnotify_event *event;
- event = kmem_cache_alloc(fsnotify_event_cachep, gfp);
+ event = kmem_cache_zalloc(fsnotify_event_cachep, gfp);
if (!event)
return NULL;
--
GitLab
From 7050c48826d5adb2210bddfb6a67aa13bbe984ed Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:27:10 -0500
Subject: [PATCH 060/863] inotify: do not reuse watch descriptors
Prior to 2.6.31 inotify would not reuse watch descriptors until all of
them had been used at least once. After the rewrite inotify would reuse
watch descriptors. The selinux utility 'restorecond' was found to have
problems when watch descriptors were reused. This patch reverts to the
pre inotify rewrite behavior to not reuse watch descriptors.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_user.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index a0e40f7c9781c..ce21ebaee89e8 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -358,7 +358,7 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns
}
static int inotify_add_to_idr(struct idr *idr, spinlock_t *idr_lock,
- int last_wd,
+ int *last_wd,
struct inotify_inode_mark_entry *ientry)
{
int ret;
@@ -368,11 +368,13 @@ static int inotify_add_to_idr(struct idr *idr, spinlock_t *idr_lock,
return -ENOMEM;
spin_lock(idr_lock);
- ret = idr_get_new_above(idr, ientry, last_wd + 1,
+ ret = idr_get_new_above(idr, ientry, *last_wd + 1,
&ientry->wd);
/* we added the mark to the idr, take a reference */
- if (!ret)
+ if (!ret) {
fsnotify_get_mark(&ientry->fsn_entry);
+ *last_wd = ientry->wd;
+ }
spin_unlock(idr_lock);
} while (ret == -EAGAIN);
@@ -647,7 +649,7 @@ static int inotify_new_watch(struct fsnotify_group *group,
if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
goto out_err;
- ret = inotify_add_to_idr(idr, idr_lock, group->inotify_data.last_wd,
+ ret = inotify_add_to_idr(idr, idr_lock, &group->inotify_data.last_wd,
tmp_ientry);
if (ret)
goto out_err;
@@ -660,9 +662,6 @@ static int inotify_new_watch(struct fsnotify_group *group,
goto out_err;
}
- /* update the idr hint, who cares about races, it's just a hint */
- group->inotify_data.last_wd = tmp_ientry->wd;
-
/* increment the number of watches the user has */
atomic_inc(&group->inotify_data.user->inotify_watches);
--
GitLab
From 2dfc1cae4c42b93b831b2417540df2b895ab7108 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 20:30:52 -0500
Subject: [PATCH 061/863] inotify: remove inotify in kernel interface
nothing uses inotify in the kernel, drop it!
Signed-off-by: Eric Paris <eparis@redhat.com>
---
Documentation/feature-removal-schedule.txt | 8 -
fs/inode.c | 6 -
fs/notify/inotify/Kconfig | 15 -
fs/notify/inotify/Makefile | 1 -
fs/notify/inotify/inotify.c | 873 ---------------------
fs/open.c | 1 +
include/linux/fs.h | 5 -
include/linux/fsnotify.h | 50 +-
include/linux/inotify.h | 174 ----
kernel/auditsc.c | 1 -
10 files changed, 4 insertions(+), 1130 deletions(-)
delete mode 100644 fs/notify/inotify/inotify.c
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 1571c0c83dba0..a8188bd3dab87 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -367,14 +367,6 @@ When: 2.6.33
Why: Should be implemented in userspace, policy daemon.
Who: Johannes Berg <johannes@sipsolutions.net>
----------------------------
-
-What: CONFIG_INOTIFY
-When: 2.6.33
-Why: last user (audit) will be converted to the newer more generic
- and more easily maintained fsnotify subsystem
-Who: Eric Paris <eparis@redhat.com>
-
----------------------------
What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
diff --git a/fs/inode.c b/fs/inode.c
index 722860b323a9b..8e1bee998796d 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -20,7 +20,6 @@
#include <linux/pagemap.h>
#include <linux/cdev.h>
#include <linux/bootmem.h>
-#include <linux/inotify.h>
#include <linux/fsnotify.h>
#include <linux/mount.h>
#include <linux/async.h>
@@ -264,10 +263,6 @@ void inode_init_once(struct inode *inode)
INIT_RAW_PRIO_TREE_ROOT(&inode->i_data.i_mmap);
INIT_LIST_HEAD(&inode->i_data.i_mmap_nonlinear);
i_size_ordered_init(inode);
-#ifdef CONFIG_INOTIFY
- INIT_LIST_HEAD(&inode->inotify_watches);
- mutex_init(&inode->inotify_mutex);
-#endif
#ifdef CONFIG_FSNOTIFY
INIT_HLIST_HEAD(&inode->i_fsnotify_mark_entries);
#endif
@@ -413,7 +408,6 @@ int invalidate_inodes(struct super_block *sb)
down_write(&iprune_sem);
spin_lock(&inode_lock);
- inotify_unmount_inodes(&sb->s_inodes);
fsnotify_unmount_inodes(&sb->s_inodes);
busy = invalidate_list(&sb->s_inodes, &throw_away);
spin_unlock(&inode_lock);
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index b3a159b21cfd0..b981fc0c8379d 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -1,18 +1,3 @@
-config INOTIFY
- bool "Inotify file change notification support"
- default n
- ---help---
- Say Y here to enable legacy in kernel inotify support. Inotify is a
- file change notification system. It is a replacement for dnotify.
- This option only provides the legacy inotify in kernel API. There
- are no in tree kernel users of this interface since it is deprecated.
- You only need this if you are loading an out of tree kernel module
- that uses inotify.
-
- For more information, see <file:Documentation/filesystems/inotify.txt>
-
- If unsure, say N.
-
config INOTIFY_USER
bool "Inotify support for userspace"
select ANON_INODES
diff --git a/fs/notify/inotify/Makefile b/fs/notify/inotify/Makefile
index 9438281713621..a380dabe09dee 100644
--- a/fs/notify/inotify/Makefile
+++ b/fs/notify/inotify/Makefile
@@ -1,2 +1 @@
-obj-$(CONFIG_INOTIFY) += inotify.o
obj-$(CONFIG_INOTIFY_USER) += inotify_fsnotify.o inotify_user.o
diff --git a/fs/notify/inotify/inotify.c b/fs/notify/inotify/inotify.c
deleted file mode 100644
index 27b75ebc74609..0000000000000
--- a/fs/notify/inotify/inotify.c
+++ /dev/null
@@ -1,873 +0,0 @@
-/*
- * fs/inotify.c - inode-based file event notifications
- *
- * Authors:
- * John McCutchan <ttb@tentacle.dhs.org>
- * Robert Love <rml@novell.com>
- *
- * Kernel API added by: Amy Griffis <amy.griffis@hp.com>
- *
- * Copyright (C) 2005 John McCutchan
- * Copyright 2006 Hewlett-Packard Development Company, L.P.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/idr.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/writeback.h>
-#include <linux/inotify.h>
-#include <linux/fsnotify_backend.h>
-
-static atomic_t inotify_cookie;
-
-/*
- * Lock ordering:
- *
- * dentry->d_lock (used to keep d_move() away from dentry->d_parent)
- * iprune_mutex (synchronize shrink_icache_memory())
- * inode_lock (protects the super_block->s_inodes list)
- * inode->inotify_mutex (protects inode->inotify_watches and watches->i_list)
- * inotify_handle->mutex (protects inotify_handle and watches->h_list)
- *
- * The inode->inotify_mutex and inotify_handle->mutex and held during execution
- * of a caller's event handler. Thus, the caller must not hold any locks
- * taken in their event handler while calling any of the published inotify
- * interfaces.
- */
-
-/*
- * Lifetimes of the three main data structures--inotify_handle, inode, and
- * inotify_watch--are managed by reference count.
- *
- * inotify_handle: Lifetime is from inotify_init() to inotify_destroy().
- * Additional references can bump the count via get_inotify_handle() and drop
- * the count via put_inotify_handle().
- *
- * inotify_watch: for inotify's purposes, lifetime is from inotify_add_watch()
- * to remove_watch_no_event(). Additional references can bump the count via
- * get_inotify_watch() and drop the count via put_inotify_watch(). The caller
- * is reponsible for the final put after receiving IN_IGNORED, or when using
- * IN_ONESHOT after receiving the first event. Inotify does the final put if
- * inotify_destroy() is called.
- *
- * inode: Pinned so long as the inode is associated with a watch, from
- * inotify_add_watch() to the final put_inotify_watch().
- */
-
-/*
- * struct inotify_handle - represents an inotify instance
- *
- * This structure is protected by the mutex 'mutex'.
- */
-struct inotify_handle {
- struct idr idr; /* idr mapping wd -> watch */
- struct mutex mutex; /* protects this bad boy */
- struct list_head watches; /* list of watches */
- atomic_t count; /* reference count */
- u32 last_wd; /* the last wd allocated */
- const struct inotify_operations *in_ops; /* inotify caller operations */
-};
-
-static inline void get_inotify_handle(struct inotify_handle *ih)
-{
- atomic_inc(&ih->count);
-}
-
-static inline void put_inotify_handle(struct inotify_handle *ih)
-{
- if (atomic_dec_and_test(&ih->count)) {
- idr_destroy(&ih->idr);
- kfree(ih);
- }
-}
-
-/**
- * get_inotify_watch - grab a reference to an inotify_watch
- * @watch: watch to grab
- */
-void get_inotify_watch(struct inotify_watch *watch)
-{
- atomic_inc(&watch->count);
-}
-EXPORT_SYMBOL_GPL(get_inotify_watch);
-
-int pin_inotify_watch(struct inotify_watch *watch)
-{
- struct super_block *sb = watch->inode->i_sb;
- if (atomic_inc_not_zero(&sb->s_active)) {
- atomic_inc(&watch->count);
- return 1;
- }
- return 0;
-}
-
-/**
- * put_inotify_watch - decrements the ref count on a given watch. cleans up
- * watch references if the count reaches zero. inotify_watch is freed by
- * inotify callers via the destroy_watch() op.
- * @watch: watch to release
- */
-void put_inotify_watch(struct inotify_watch *watch)
-{
- if (atomic_dec_and_test(&watch->count)) {
- struct inotify_handle *ih = watch->ih;
-
- iput(watch->inode);
- ih->in_ops->destroy_watch(watch);
- put_inotify_handle(ih);
- }
-}
-EXPORT_SYMBOL_GPL(put_inotify_watch);
-
-void unpin_inotify_watch(struct inotify_watch *watch)
-{
- struct super_block *sb = watch->inode->i_sb;
- put_inotify_watch(watch);
- deactivate_super(sb);
-}
-
-/*
- * inotify_handle_get_wd - returns the next WD for use by the given handle
- *
- * Callers must hold ih->mutex. This function can sleep.
- */
-static int inotify_handle_get_wd(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
- int ret;
-
- do {
- if (unlikely(!idr_pre_get(&ih->idr, GFP_NOFS)))
- return -ENOSPC;
- ret = idr_get_new_above(&ih->idr, watch, ih->last_wd+1, &watch->wd);
- } while (ret == -EAGAIN);
-
- if (likely(!ret))
- ih->last_wd = watch->wd;
-
- return ret;
-}
-
-/*
- * inotify_inode_watched - returns nonzero if there are watches on this inode
- * and zero otherwise. We call this lockless, we do not care if we race.
- */
-static inline int inotify_inode_watched(struct inode *inode)
-{
- return !list_empty(&inode->inotify_watches);
-}
-
-/*
- * Get child dentry flag into synch with parent inode.
- * Flag should always be clear for negative dentrys.
- */
-static void set_dentry_child_flags(struct inode *inode, int watched)
-{
- struct dentry *alias;
-
- spin_lock(&dcache_lock);
- list_for_each_entry(alias, &inode->i_dentry, d_alias) {
- struct dentry *child;
-
- list_for_each_entry(child, &alias->d_subdirs, d_u.d_child) {
- if (!child->d_inode)
- continue;
-
- spin_lock(&child->d_lock);
- if (watched)
- child->d_flags |= DCACHE_INOTIFY_PARENT_WATCHED;
- else
- child->d_flags &=~DCACHE_INOTIFY_PARENT_WATCHED;
- spin_unlock(&child->d_lock);
- }
- }
- spin_unlock(&dcache_lock);
-}
-
-/*
- * inotify_find_handle - find the watch associated with the given inode and
- * handle
- *
- * Callers must hold inode->inotify_mutex.
- */
-static struct inotify_watch *inode_find_handle(struct inode *inode,
- struct inotify_handle *ih)
-{
- struct inotify_watch *watch;
-
- list_for_each_entry(watch, &inode->inotify_watches, i_list) {
- if (watch->ih == ih)
- return watch;
- }
-
- return NULL;
-}
-
-/*
- * remove_watch_no_event - remove watch without the IN_IGNORED event.
- *
- * Callers must hold both inode->inotify_mutex and ih->mutex.
- */
-static void remove_watch_no_event(struct inotify_watch *watch,
- struct inotify_handle *ih)
-{
- list_del(&watch->i_list);
- list_del(&watch->h_list);
-
- if (!inotify_inode_watched(watch->inode))
- set_dentry_child_flags(watch->inode, 0);
-
- idr_remove(&ih->idr, watch->wd);
-}
-
-/**
- * inotify_remove_watch_locked - Remove a watch from both the handle and the
- * inode. Sends the IN_IGNORED event signifying that the inode is no longer
- * watched. May be invoked from a caller's event handler.
- * @ih: inotify handle associated with watch
- * @watch: watch to remove
- *
- * Callers must hold both inode->inotify_mutex and ih->mutex.
- */
-void inotify_remove_watch_locked(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
- remove_watch_no_event(watch, ih);
- ih->in_ops->handle_event(watch, watch->wd, IN_IGNORED, 0, NULL, NULL);
-}
-EXPORT_SYMBOL_GPL(inotify_remove_watch_locked);
-
-/* Kernel API for producing events */
-
-/*
- * inotify_d_instantiate - instantiate dcache entry for inode
- */
-void inotify_d_instantiate(struct dentry *entry, struct inode *inode)
-{
- struct dentry *parent;
-
- if (!inode)
- return;
-
- spin_lock(&entry->d_lock);
- parent = entry->d_parent;
- if (parent->d_inode && inotify_inode_watched(parent->d_inode))
- entry->d_flags |= DCACHE_INOTIFY_PARENT_WATCHED;
- spin_unlock(&entry->d_lock);
-}
-
-/*
- * inotify_d_move - dcache entry has been moved
- */
-void inotify_d_move(struct dentry *entry)
-{
- struct dentry *parent;
-
- parent = entry->d_parent;
- if (inotify_inode_watched(parent->d_inode))
- entry->d_flags |= DCACHE_INOTIFY_PARENT_WATCHED;
- else
- entry->d_flags &= ~DCACHE_INOTIFY_PARENT_WATCHED;
-}
-
-/**
- * inotify_inode_queue_event - queue an event to all watches on this inode
- * @inode: inode event is originating from
- * @mask: event mask describing this event
- * @cookie: cookie for synchronization, or zero
- * @name: filename, if any
- * @n_inode: inode associated with name
- */
-void inotify_inode_queue_event(struct inode *inode, u32 mask, u32 cookie,
- const char *name, struct inode *n_inode)
-{
- struct inotify_watch *watch, *next;
-
- if (!inotify_inode_watched(inode))
- return;
-
- mutex_lock(&inode->inotify_mutex);
- list_for_each_entry_safe(watch, next, &inode->inotify_watches, i_list) {
- u32 watch_mask = watch->mask;
- if (watch_mask & mask) {
- struct inotify_handle *ih= watch->ih;
- mutex_lock(&ih->mutex);
- if (watch_mask & IN_ONESHOT)
- remove_watch_no_event(watch, ih);
- ih->in_ops->handle_event(watch, watch->wd, mask, cookie,
- name, n_inode);
- mutex_unlock(&ih->mutex);
- }
- }
- mutex_unlock(&inode->inotify_mutex);
-}
-EXPORT_SYMBOL_GPL(inotify_inode_queue_event);
-
-/**
- * inotify_dentry_parent_queue_event - queue an event to a dentry's parent
- * @dentry: the dentry in question, we queue against this dentry's parent
- * @mask: event mask describing this event
- * @cookie: cookie for synchronization, or zero
- * @name: filename, if any
- */
-void inotify_dentry_parent_queue_event(struct dentry *dentry, u32 mask,
- u32 cookie, const char *name)
-{
- struct dentry *parent;
- struct inode *inode;
-
- if (!(dentry->d_flags & DCACHE_INOTIFY_PARENT_WATCHED))
- return;
-
- spin_lock(&dentry->d_lock);
- parent = dentry->d_parent;
- inode = parent->d_inode;
-
- if (inotify_inode_watched(inode)) {
- dget(parent);
- spin_unlock(&dentry->d_lock);
- inotify_inode_queue_event(inode, mask, cookie, name,
- dentry->d_inode);
- dput(parent);
- } else
- spin_unlock(&dentry->d_lock);
-}
-EXPORT_SYMBOL_GPL(inotify_dentry_parent_queue_event);
-
-/**
- * inotify_get_cookie - return a unique cookie for use in synchronizing events.
- */
-u32 inotify_get_cookie(void)
-{
- return atomic_inc_return(&inotify_cookie);
-}
-EXPORT_SYMBOL_GPL(inotify_get_cookie);
-
-/**
- * inotify_unmount_inodes - an sb is unmounting. handle any watched inodes.
- * @list: list of inodes being unmounted (sb->s_inodes)
- *
- * Called with inode_lock held, protecting the unmounting super block's list
- * of inodes, and with iprune_mutex held, keeping shrink_icache_memory() at bay.
- * We temporarily drop inode_lock, however, and CAN block.
- */
-void inotify_unmount_inodes(struct list_head *list)
-{
- struct inode *inode, *next_i, *need_iput = NULL;
-
- list_for_each_entry_safe(inode, next_i, list, i_sb_list) {
- struct inotify_watch *watch, *next_w;
- struct inode *need_iput_tmp;
- struct list_head *watches;
-
- /*
- * We cannot __iget() an inode in state I_CLEAR, I_FREEING,
- * I_WILL_FREE, or I_NEW which is fine because by that point
- * the inode cannot have any associated watches.
- */
- if (inode->i_state & (I_CLEAR|I_FREEING|I_WILL_FREE|I_NEW))
- continue;
-
- /*
- * If i_count is zero, the inode cannot have any watches and
- * doing an __iget/iput with MS_ACTIVE clear would actually
- * evict all inodes with zero i_count from icache which is
- * unnecessarily violent and may in fact be illegal to do.
- */
- if (!atomic_read(&inode->i_count))
- continue;
-
- need_iput_tmp = need_iput;
- need_iput = NULL;
- /* In case inotify_remove_watch_locked() drops a reference. */
- if (inode != need_iput_tmp)
- __iget(inode);
- else
- need_iput_tmp = NULL;
- /* In case the dropping of a reference would nuke next_i. */
- if ((&next_i->i_sb_list != list) &&
- atomic_read(&next_i->i_count) &&
- !(next_i->i_state & (I_CLEAR | I_FREEING |
- I_WILL_FREE))) {
- __iget(next_i);
- need_iput = next_i;
- }
-
- /*
- * We can safely drop inode_lock here because we hold
- * references on both inode and next_i. Also no new inodes
- * will be added since the umount has begun. Finally,
- * iprune_mutex keeps shrink_icache_memory() away.
- */
- spin_unlock(&inode_lock);
-
- if (need_iput_tmp)
- iput(need_iput_tmp);
-
- /* for each watch, send IN_UNMOUNT and then remove it */
- mutex_lock(&inode->inotify_mutex);
- watches = &inode->inotify_watches;
- list_for_each_entry_safe(watch, next_w, watches, i_list) {
- struct inotify_handle *ih= watch->ih;
- get_inotify_watch(watch);
- mutex_lock(&ih->mutex);
- ih->in_ops->handle_event(watch, watch->wd, IN_UNMOUNT, 0,
- NULL, NULL);
- inotify_remove_watch_locked(ih, watch);
- mutex_unlock(&ih->mutex);
- put_inotify_watch(watch);
- }
- mutex_unlock(&inode->inotify_mutex);
- iput(inode);
-
- spin_lock(&inode_lock);
- }
-}
-EXPORT_SYMBOL_GPL(inotify_unmount_inodes);
-
-/**
- * inotify_inode_is_dead - an inode has been deleted, cleanup any watches
- * @inode: inode that is about to be removed
- */
-void inotify_inode_is_dead(struct inode *inode)
-{
- struct inotify_watch *watch, *next;
-
- mutex_lock(&inode->inotify_mutex);
- list_for_each_entry_safe(watch, next, &inode->inotify_watches, i_list) {
- struct inotify_handle *ih = watch->ih;
- mutex_lock(&ih->mutex);
- inotify_remove_watch_locked(ih, watch);
- mutex_unlock(&ih->mutex);
- }
- mutex_unlock(&inode->inotify_mutex);
-}
-EXPORT_SYMBOL_GPL(inotify_inode_is_dead);
-
-/* Kernel Consumer API */
-
-/**
- * inotify_init - allocate and initialize an inotify instance
- * @ops: caller's inotify operations
- */
-struct inotify_handle *inotify_init(const struct inotify_operations *ops)
-{
- struct inotify_handle *ih;
-
- ih = kmalloc(sizeof(struct inotify_handle), GFP_KERNEL);
- if (unlikely(!ih))
- return ERR_PTR(-ENOMEM);
-
- idr_init(&ih->idr);
- INIT_LIST_HEAD(&ih->watches);
- mutex_init(&ih->mutex);
- ih->last_wd = 0;
- ih->in_ops = ops;
- atomic_set(&ih->count, 0);
- get_inotify_handle(ih);
-
- return ih;
-}
-EXPORT_SYMBOL_GPL(inotify_init);
-
-/**
- * inotify_init_watch - initialize an inotify watch
- * @watch: watch to initialize
- */
-void inotify_init_watch(struct inotify_watch *watch)
-{
- INIT_LIST_HEAD(&watch->h_list);
- INIT_LIST_HEAD(&watch->i_list);
- atomic_set(&watch->count, 0);
- get_inotify_watch(watch); /* initial get */
-}
-EXPORT_SYMBOL_GPL(inotify_init_watch);
-
-/*
- * Watch removals suck violently. To kick the watch out we need (in this
- * order) inode->inotify_mutex and ih->mutex. That's fine if we have
- * a hold on inode; however, for all other cases we need to make damn sure
- * we don't race with umount. We can *NOT* just grab a reference to a
- * watch - inotify_unmount_inodes() will happily sail past it and we'll end
- * with reference to inode potentially outliving its superblock. Ideally
- * we just want to grab an active reference to superblock if we can; that
- * will make sure we won't go into inotify_umount_inodes() until we are
- * done. Cleanup is just deactivate_super(). However, that leaves a messy
- * case - what if we *are* racing with umount() and active references to
- * superblock can't be acquired anymore? We can bump ->s_count, grab
- * ->s_umount, which will wait until the superblock is shut down and the
- * watch in question is pining for fjords.
- *
- * And yes, this is far beyond mere "not very pretty"; so's the entire
- * concept of inotify to start with.
- */
-
-/**
- * pin_to_kill - pin the watch down for removal
- * @ih: inotify handle
- * @watch: watch to kill
- *
- * Called with ih->mutex held, drops it. Possible return values:
- * 0 - nothing to do, it has died
- * 1 - remove it, drop the reference and deactivate_super()
- */
-static int pin_to_kill(struct inotify_handle *ih, struct inotify_watch *watch)
-{
- struct super_block *sb = watch->inode->i_sb;
-
- if (atomic_inc_not_zero(&sb->s_active)) {
- get_inotify_watch(watch);
- mutex_unlock(&ih->mutex);
- return 1; /* the best outcome */
- }
- spin_lock(&sb_lock);
- sb->s_count++;
- spin_unlock(&sb_lock);
- mutex_unlock(&ih->mutex); /* can't grab ->s_umount under it */
- down_read(&sb->s_umount);
- /* fs is already shut down; the watch is dead */
- drop_super(sb);
- return 0;
-}
-
-static void unpin_and_kill(struct inotify_watch *watch)
-{
- struct super_block *sb = watch->inode->i_sb;
- put_inotify_watch(watch);
- deactivate_super(sb);
-}
-
-/**
- * inotify_destroy - clean up and destroy an inotify instance
- * @ih: inotify handle
- */
-void inotify_destroy(struct inotify_handle *ih)
-{
- /*
- * Destroy all of the watches for this handle. Unfortunately, not very
- * pretty. We cannot do a simple iteration over the list, because we
- * do not know the inode until we iterate to the watch. But we need to
- * hold inode->inotify_mutex before ih->mutex. The following works.
- *
- * AV: it had to become even uglier to start working ;-/
- */
- while (1) {
- struct inotify_watch *watch;
- struct list_head *watches;
- struct super_block *sb;
- struct inode *inode;
-
- mutex_lock(&ih->mutex);
- watches = &ih->watches;
- if (list_empty(watches)) {
- mutex_unlock(&ih->mutex);
- break;
- }
- watch = list_first_entry(watches, struct inotify_watch, h_list);
- sb = watch->inode->i_sb;
- if (!pin_to_kill(ih, watch))
- continue;
-
- inode = watch->inode;
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- /* make sure we didn't race with another list removal */
- if (likely(idr_find(&ih->idr, watch->wd))) {
- remove_watch_no_event(watch, ih);
- put_inotify_watch(watch);
- }
-
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
- unpin_and_kill(watch);
- }
-
- /* free this handle: the put matching the get in inotify_init() */
- put_inotify_handle(ih);
-}
-EXPORT_SYMBOL_GPL(inotify_destroy);
-
-/**
- * inotify_find_watch - find an existing watch for an (ih,inode) pair
- * @ih: inotify handle
- * @inode: inode to watch
- * @watchp: pointer to existing inotify_watch
- *
- * Caller must pin given inode (via nameidata).
- */
-s32 inotify_find_watch(struct inotify_handle *ih, struct inode *inode,
- struct inotify_watch **watchp)
-{
- struct inotify_watch *old;
- int ret = -ENOENT;
-
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- old = inode_find_handle(inode, ih);
- if (unlikely(old)) {
- get_inotify_watch(old); /* caller must put watch */
- *watchp = old;
- ret = old->wd;
- }
-
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(inotify_find_watch);
-
-/**
- * inotify_find_update_watch - find and update the mask of an existing watch
- * @ih: inotify handle
- * @inode: inode's watch to update
- * @mask: mask of events to watch
- *
- * Caller must pin given inode (via nameidata).
- */
-s32 inotify_find_update_watch(struct inotify_handle *ih, struct inode *inode,
- u32 mask)
-{
- struct inotify_watch *old;
- int mask_add = 0;
- int ret;
-
- if (mask & IN_MASK_ADD)
- mask_add = 1;
-
- /* don't allow invalid bits: we don't want flags set */
- mask &= IN_ALL_EVENTS | IN_ONESHOT;
- if (unlikely(!mask))
- return -EINVAL;
-
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- /*
- * Handle the case of re-adding a watch on an (inode,ih) pair that we
- * are already watching. We just update the mask and return its wd.
- */
- old = inode_find_handle(inode, ih);
- if (unlikely(!old)) {
- ret = -ENOENT;
- goto out;
- }
-
- if (mask_add)
- old->mask |= mask;
- else
- old->mask = mask;
- ret = old->wd;
-out:
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(inotify_find_update_watch);
-
-/**
- * inotify_add_watch - add a watch to an inotify instance
- * @ih: inotify handle
- * @watch: caller allocated watch structure
- * @inode: inode to watch
- * @mask: mask of events to watch
- *
- * Caller must pin given inode (via nameidata).
- * Caller must ensure it only calls inotify_add_watch() once per watch.
- * Calls inotify_handle_get_wd() so may sleep.
- */
-s32 inotify_add_watch(struct inotify_handle *ih, struct inotify_watch *watch,
- struct inode *inode, u32 mask)
-{
- int ret = 0;
- int newly_watched;
-
- /* don't allow invalid bits: we don't want flags set */
- mask &= IN_ALL_EVENTS | IN_ONESHOT;
- if (unlikely(!mask))
- return -EINVAL;
- watch->mask = mask;
-
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- /* Initialize a new watch */
- ret = inotify_handle_get_wd(ih, watch);
- if (unlikely(ret))
- goto out;
- ret = watch->wd;
-
- /* save a reference to handle and bump the count to make it official */
- get_inotify_handle(ih);
- watch->ih = ih;
-
- /*
- * Save a reference to the inode and bump the ref count to make it
- * official. We hold a reference to nameidata, which makes this safe.
- */
- watch->inode = igrab(inode);
-
- /* Add the watch to the handle's and the inode's list */
- newly_watched = !inotify_inode_watched(inode);
- list_add(&watch->h_list, &ih->watches);
- list_add(&watch->i_list, &inode->inotify_watches);
- /*
- * Set child flags _after_ adding the watch, so there is no race
- * windows where newly instantiated children could miss their parent's
- * watched flag.
- */
- if (newly_watched)
- set_dentry_child_flags(inode, 1);
-
-out:
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(inotify_add_watch);
-
-/**
- * inotify_clone_watch - put the watch next to existing one
- * @old: already installed watch
- * @new: new watch
- *
- * Caller must hold the inotify_mutex of inode we are dealing with;
- * it is expected to remove the old watch before unlocking the inode.
- */
-s32 inotify_clone_watch(struct inotify_watch *old, struct inotify_watch *new)
-{
- struct inotify_handle *ih = old->ih;
- int ret = 0;
-
- new->mask = old->mask;
- new->ih = ih;
-
- mutex_lock(&ih->mutex);
-
- /* Initialize a new watch */
- ret = inotify_handle_get_wd(ih, new);
- if (unlikely(ret))
- goto out;
- ret = new->wd;
-
- get_inotify_handle(ih);
-
- new->inode = igrab(old->inode);
-
- list_add(&new->h_list, &ih->watches);
- list_add(&new->i_list, &old->inode->inotify_watches);
-out:
- mutex_unlock(&ih->mutex);
- return ret;
-}
-
-void inotify_evict_watch(struct inotify_watch *watch)
-{
- get_inotify_watch(watch);
- mutex_lock(&watch->ih->mutex);
- inotify_remove_watch_locked(watch->ih, watch);
- mutex_unlock(&watch->ih->mutex);
-}
-
-/**
- * inotify_rm_wd - remove a watch from an inotify instance
- * @ih: inotify handle
- * @wd: watch descriptor to remove
- *
- * Can sleep.
- */
-int inotify_rm_wd(struct inotify_handle *ih, u32 wd)
-{
- struct inotify_watch *watch;
- struct super_block *sb;
- struct inode *inode;
-
- mutex_lock(&ih->mutex);
- watch = idr_find(&ih->idr, wd);
- if (unlikely(!watch)) {
- mutex_unlock(&ih->mutex);
- return -EINVAL;
- }
- sb = watch->inode->i_sb;
- if (!pin_to_kill(ih, watch))
- return 0;
-
- inode = watch->inode;
-
- mutex_lock(&inode->inotify_mutex);
- mutex_lock(&ih->mutex);
-
- /* make sure that we did not race */
- if (likely(idr_find(&ih->idr, wd) == watch))
- inotify_remove_watch_locked(ih, watch);
-
- mutex_unlock(&ih->mutex);
- mutex_unlock(&inode->inotify_mutex);
- unpin_and_kill(watch);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(inotify_rm_wd);
-
-/**
- * inotify_rm_watch - remove a watch from an inotify instance
- * @ih: inotify handle
- * @watch: watch to remove
- *
- * Can sleep.
- */
-int inotify_rm_watch(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
- return inotify_rm_wd(ih, watch->wd);
-}
-EXPORT_SYMBOL_GPL(inotify_rm_watch);
-
-/*
- * inotify_setup - core initialization function
- */
-static int __init inotify_setup(void)
-{
- BUILD_BUG_ON(IN_ACCESS != FS_ACCESS);
- BUILD_BUG_ON(IN_MODIFY != FS_MODIFY);
- BUILD_BUG_ON(IN_ATTRIB != FS_ATTRIB);
- BUILD_BUG_ON(IN_CLOSE_WRITE != FS_CLOSE_WRITE);
- BUILD_BUG_ON(IN_CLOSE_NOWRITE != FS_CLOSE_NOWRITE);
- BUILD_BUG_ON(IN_OPEN != FS_OPEN);
- BUILD_BUG_ON(IN_MOVED_FROM != FS_MOVED_FROM);
- BUILD_BUG_ON(IN_MOVED_TO != FS_MOVED_TO);
- BUILD_BUG_ON(IN_CREATE != FS_CREATE);
- BUILD_BUG_ON(IN_DELETE != FS_DELETE);
- BUILD_BUG_ON(IN_DELETE_SELF != FS_DELETE_SELF);
- BUILD_BUG_ON(IN_MOVE_SELF != FS_MOVE_SELF);
- BUILD_BUG_ON(IN_Q_OVERFLOW != FS_Q_OVERFLOW);
-
- BUILD_BUG_ON(IN_UNMOUNT != FS_UNMOUNT);
- BUILD_BUG_ON(IN_ISDIR != FS_IN_ISDIR);
- BUILD_BUG_ON(IN_IGNORED != FS_IN_IGNORED);
- BUILD_BUG_ON(IN_ONESHOT != FS_IN_ONESHOT);
-
- atomic_set(&inotify_cookie, 0);
-
- return 0;
-}
-
-module_init(inotify_setup);
diff --git a/fs/open.c b/fs/open.c
index 5463266db9e63..94d54d3efa8b3 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -29,6 +29,7 @@
#include <linux/falloc.h>
#include <linux/fs_struct.h>
#include <linux/ima.h>
+#include <linux/dnotify.h>
#include "internal.h"
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 68ca1b0491af4..e5598d2f99b98 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -771,11 +771,6 @@ struct inode {
struct hlist_head i_fsnotify_mark_entries; /* fsnotify mark entries */
#endif
-#ifdef CONFIG_INOTIFY
- struct list_head inotify_watches; /* watches on this inode */
- struct mutex inotify_mutex; /* protects the watches list */
-#endif
-
unsigned long i_state;
unsigned long dirtied_when; /* jiffies of first dirtying */
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 01755909ce816..f958e93feb97f 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -11,8 +11,6 @@
* (C) Copyright 2005 Robert Love
*/
-#include <linux/dnotify.h>
-#include <linux/inotify.h>
#include <linux/fsnotify_backend.h>
#include <linux/audit.h>
#include <linux/slab.h>
@@ -25,16 +23,12 @@ static inline void fsnotify_d_instantiate(struct dentry *entry,
struct inode *inode)
{
__fsnotify_d_instantiate(entry, inode);
-
- inotify_d_instantiate(entry, inode);
}
/* Notify this dentry's parent about a child's events. */
static inline void fsnotify_parent(struct dentry *dentry, __u32 mask)
{
__fsnotify_parent(dentry, mask);
-
- inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
}
/*
@@ -48,8 +42,6 @@ static inline void fsnotify_d_move(struct dentry *entry)
* cares about events from this entry.
*/
__fsnotify_update_dcache_flags(entry);
-
- inotify_d_move(entry);
}
/*
@@ -57,8 +49,6 @@ static inline void fsnotify_d_move(struct dentry *entry)
*/
static inline void fsnotify_link_count(struct inode *inode)
{
- inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL);
-
fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
@@ -70,7 +60,6 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
int isdir, struct inode *target, struct dentry *moved)
{
struct inode *source = moved->d_inode;
- u32 in_cookie = inotify_get_cookie();
u32 fs_cookie = fsnotify_get_cookie();
__u32 old_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_FROM);
__u32 new_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_TO);
@@ -80,31 +69,18 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
old_dir_mask |= FS_DN_RENAME;
if (isdir) {
- isdir = IN_ISDIR;
old_dir_mask |= FS_IN_ISDIR;
new_dir_mask |= FS_IN_ISDIR;
}
- inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir, in_cookie, old_name,
- source);
- inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, in_cookie, new_name,
- source);
-
fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
- if (target) {
- inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL, NULL);
- inotify_inode_is_dead(target);
-
- /* this is really a link_count change not a removal */
+ if (target)
fsnotify_link_count(target);
- }
- if (source) {
- inotify_inode_queue_event(source, IN_MOVE_SELF, 0, NULL, NULL);
+ if (source)
fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0);
- }
audit_inode_child(moved, new_dir);
}
@@ -134,9 +110,6 @@ static inline void fsnotify_nameremove(struct dentry *dentry, int isdir)
*/
static inline void fsnotify_inoderemove(struct inode *inode)
{
- inotify_inode_queue_event(inode, IN_DELETE_SELF, 0, NULL, NULL);
- inotify_inode_is_dead(inode);
-
fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
__fsnotify_inode_delete(inode);
}
@@ -146,8 +119,6 @@ static inline void fsnotify_inoderemove(struct inode *inode)
*/
static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
{
- inotify_inode_queue_event(inode, IN_CREATE, 0, dentry->d_name.name,
- dentry->d_inode);
audit_inode_child(dentry, inode);
fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
@@ -160,8 +131,6 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
*/
static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry)
{
- inotify_inode_queue_event(dir, IN_CREATE, 0, new_dentry->d_name.name,
- inode);
fsnotify_link_count(inode);
audit_inode_child(new_dentry, dir);
@@ -176,7 +145,6 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
__u32 mask = (FS_CREATE | FS_IN_ISDIR);
struct inode *d_inode = dentry->d_inode;
- inotify_inode_queue_event(inode, mask, 0, dentry->d_name.name, d_inode);
audit_inode_child(dentry, inode);
fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
@@ -193,8 +161,6 @@ static inline void fsnotify_access(struct dentry *dentry)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
fsnotify_parent(dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
@@ -210,8 +176,6 @@ static inline void fsnotify_modify(struct dentry *dentry)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
fsnotify_parent(dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
@@ -227,8 +191,6 @@ static inline void fsnotify_open(struct dentry *dentry)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
fsnotify_parent(dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
@@ -246,8 +208,6 @@ static inline void fsnotify_close(struct file *file)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
fsnotify_parent(dentry, mask);
fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
@@ -263,8 +223,6 @@ static inline void fsnotify_xattr(struct dentry *dentry)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
fsnotify_parent(dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
@@ -299,14 +257,12 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
if (mask) {
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
-
fsnotify_parent(dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
}
-#if defined(CONFIG_INOTIFY) || defined(CONFIG_FSNOTIFY) /* notify helpers */
+#if defined(CONFIG_FSNOTIFY) /* notify helpers */
/*
* fsnotify_oldname_init - save off the old filename before we change it
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index 37ea2894b3c0f..959a38b8f75dd 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -69,178 +69,4 @@ struct inotify_event {
#define IN_CLOEXEC O_CLOEXEC
#define IN_NONBLOCK O_NONBLOCK
-#ifdef __KERNEL__
-
-#include <linux/dcache.h>
-#include <linux/fs.h>
-
-/*
- * struct inotify_watch - represents a watch request on a specific inode
- *
- * h_list is protected by ih->mutex of the associated inotify_handle.
- * i_list, mask are protected by inode->inotify_mutex of the associated inode.
- * ih, inode, and wd are never written to once the watch is created.
- *
- * Callers must use the established inotify interfaces to access inotify_watch
- * contents. The content of this structure is private to the inotify
- * implementation.
- */
-struct inotify_watch {
- struct list_head h_list; /* entry in inotify_handle's list */
- struct list_head i_list; /* entry in inode's list */
- atomic_t count; /* reference count */
- struct inotify_handle *ih; /* associated inotify handle */
- struct inode *inode; /* associated inode */
- __s32 wd; /* watch descriptor */
- __u32 mask; /* event mask for this watch */
-};
-
-struct inotify_operations {
- void (*handle_event)(struct inotify_watch *, u32, u32, u32,
- const char *, struct inode *);
- void (*destroy_watch)(struct inotify_watch *);
-};
-
-#ifdef CONFIG_INOTIFY
-
-/* Kernel API for producing events */
-
-extern void inotify_d_instantiate(struct dentry *, struct inode *);
-extern void inotify_d_move(struct dentry *);
-extern void inotify_inode_queue_event(struct inode *, __u32, __u32,
- const char *, struct inode *);
-extern void inotify_dentry_parent_queue_event(struct dentry *, __u32, __u32,
- const char *);
-extern void inotify_unmount_inodes(struct list_head *);
-extern void inotify_inode_is_dead(struct inode *);
-extern u32 inotify_get_cookie(void);
-
-/* Kernel Consumer API */
-
-extern struct inotify_handle *inotify_init(const struct inotify_operations *);
-extern void inotify_init_watch(struct inotify_watch *);
-extern void inotify_destroy(struct inotify_handle *);
-extern __s32 inotify_find_watch(struct inotify_handle *, struct inode *,
- struct inotify_watch **);
-extern __s32 inotify_find_update_watch(struct inotify_handle *, struct inode *,
- u32);
-extern __s32 inotify_add_watch(struct inotify_handle *, struct inotify_watch *,
- struct inode *, __u32);
-extern __s32 inotify_clone_watch(struct inotify_watch *, struct inotify_watch *);
-extern void inotify_evict_watch(struct inotify_watch *);
-extern int inotify_rm_watch(struct inotify_handle *, struct inotify_watch *);
-extern int inotify_rm_wd(struct inotify_handle *, __u32);
-extern void inotify_remove_watch_locked(struct inotify_handle *,
- struct inotify_watch *);
-extern void get_inotify_watch(struct inotify_watch *);
-extern void put_inotify_watch(struct inotify_watch *);
-extern int pin_inotify_watch(struct inotify_watch *);
-extern void unpin_inotify_watch(struct inotify_watch *);
-
-#else
-
-static inline void inotify_d_instantiate(struct dentry *dentry,
- struct inode *inode)
-{
-}
-
-static inline void inotify_d_move(struct dentry *dentry)
-{
-}
-
-static inline void inotify_inode_queue_event(struct inode *inode,
- __u32 mask, __u32 cookie,
- const char *filename,
- struct inode *n_inode)
-{
-}
-
-static inline void inotify_dentry_parent_queue_event(struct dentry *dentry,
- __u32 mask, __u32 cookie,
- const char *filename)
-{
-}
-
-static inline void inotify_unmount_inodes(struct list_head *list)
-{
-}
-
-static inline void inotify_inode_is_dead(struct inode *inode)
-{
-}
-
-static inline u32 inotify_get_cookie(void)
-{
- return 0;
-}
-
-static inline struct inotify_handle *inotify_init(const struct inotify_operations *ops)
-{
- return ERR_PTR(-EOPNOTSUPP);
-}
-
-static inline void inotify_init_watch(struct inotify_watch *watch)
-{
-}
-
-static inline void inotify_destroy(struct inotify_handle *ih)
-{
-}
-
-static inline __s32 inotify_find_watch(struct inotify_handle *ih, struct inode *inode,
- struct inotify_watch **watchp)
-{
- return -EOPNOTSUPP;
-}
-
-static inline __s32 inotify_find_update_watch(struct inotify_handle *ih,
- struct inode *inode, u32 mask)
-{
- return -EOPNOTSUPP;
-}
-
-static inline __s32 inotify_add_watch(struct inotify_handle *ih,
- struct inotify_watch *watch,
- struct inode *inode, __u32 mask)
-{
- return -EOPNOTSUPP;
-}
-
-static inline int inotify_rm_watch(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
- return -EOPNOTSUPP;
-}
-
-static inline int inotify_rm_wd(struct inotify_handle *ih, __u32 wd)
-{
- return -EOPNOTSUPP;
-}
-
-static inline void inotify_remove_watch_locked(struct inotify_handle *ih,
- struct inotify_watch *watch)
-{
-}
-
-static inline void get_inotify_watch(struct inotify_watch *watch)
-{
-}
-
-static inline void put_inotify_watch(struct inotify_watch *watch)
-{
-}
-
-extern inline int pin_inotify_watch(struct inotify_watch *watch)
-{
- return 0;
-}
-
-extern inline void unpin_inotify_watch(struct inotify_watch *watch)
-{
-}
-
-#endif /* CONFIG_INOTIFY */
-
-#endif /* __KERNEL __ */
-
#endif /* _LINUX_INOTIFY_H */
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 786901cd82175..853185f7ba7e0 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -65,7 +65,6 @@
#include <linux/binfmts.h>
#include <linux/highmem.h>
#include <linux/syscalls.h>
-#include <linux/inotify.h>
#include <linux/capability.h>
#include <linux/fs_struct.h>
--
GitLab
From d7f0ce4e436b6109527c51b0efe0deff53d215f7 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Tue, 22 Dec 2009 23:16:33 -0500
Subject: [PATCH 062/863] inotify: do not spam console without limit
inotify was supposed to have a dmesg printk ratelimitor which would cause
inotify to only emit one message per boot. The static bool was never set
so it kept firing messages. This patch correctly limits warnings in multiple
places.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_user.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index ce21ebaee89e8..f2b542479e91b 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -449,20 +449,18 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
* if it wasn't....
*/
if (wd == -1) {
- printk(KERN_WARNING "%s: ientry=%p ientry->wd=%d ientry->group=%p"
+ WARN_ONCE(1, "%s: ientry=%p ientry->wd=%d ientry->group=%p"
" ientry->inode=%p\n", __func__, ientry, ientry->wd,
ientry->fsn_entry.group, ientry->fsn_entry.inode);
- WARN_ON(1);
goto out;
}
/* Lets look in the idr to see if we find it */
found_ientry = inotify_idr_find_locked(group, wd);
if (unlikely(!found_ientry)) {
- printk(KERN_WARNING "%s: ientry=%p ientry->wd=%d ientry->group=%p"
+ WARN_ONCE(1, "%s: ientry=%p ientry->wd=%d ientry->group=%p"
" ientry->inode=%p\n", __func__, ientry, ientry->wd,
ientry->fsn_entry.group, ientry->fsn_entry.inode);
- WARN_ON(1);
goto out;
}
@@ -472,8 +470,7 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
* fucked up somewhere.
*/
if (unlikely(found_ientry != ientry)) {
- WARN_ON(1);
- printk(KERN_WARNING "%s: ientry=%p ientry->wd=%d ientry->group=%p "
+ WARN_ONCE(1, "%s: ientry=%p ientry->wd=%d ientry->group=%p "
"entry->inode=%p found_ientry=%p found_ientry->wd=%d "
"found_ientry->group=%p found_ientry->inode=%p\n",
__func__, ientry, ientry->wd, ientry->fsn_entry.group,
@@ -489,7 +486,7 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
* one ref grabbed by inotify_idr_find
*/
if (unlikely(atomic_read(&ientry->fsn_entry.refcnt) < 3)) {
- printk(KERN_WARNING "%s: ientry=%p ientry->wd=%d ientry->group=%p"
+ printk(KERN_ERR "%s: ientry=%p ientry->wd=%d ientry->group=%p"
" ientry->inode=%p\n", __func__, ientry, ientry->wd,
ientry->fsn_entry.group, ientry->fsn_entry.inode);
/* we can't really recover with bad ref cnting.. */
--
GitLab
From 7b0a04fbfb35650941af87728d4891515b4fc179 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:21 -0500
Subject: [PATCH 063/863] fsnotify: provide the data type to should_send_event
fanotify is only interested in event types which contain enough information
to open the original file in the context of the fanotify listener. Since
fanotify may not want to send events if that data isn't present we pass
the data type to the should_send_event function call so fanotify can express
its lack of interest.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 3 ++-
fs/notify/fsnotify.c | 2 +-
fs/notify/inotify/inotify_fsnotify.c | 3 ++-
include/linux/fsnotify_backend.h | 3 ++-
kernel/audit_tree.c | 3 ++-
kernel/audit_watch.c | 3 ++-
6 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 85b97fca14de3..6f30f496e2352 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -133,7 +133,8 @@ static int dnotify_handle_event(struct fsnotify_group *group,
* userspace notification for that pair.
*/
static bool dnotify_should_send_event(struct fsnotify_group *group,
- struct inode *inode, __u32 mask)
+ struct inode *inode, __u32 mask,
+ int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index fcc2f064af830..fc06e47893928 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -157,7 +157,7 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
idx = srcu_read_lock(&fsnotify_grp_srcu);
list_for_each_entry_rcu(group, &fsnotify_groups, group_list) {
if (test_mask & group->mask) {
- if (!group->ops->should_send_event(group, to_tell, mask))
+ if (!group->ops->should_send_event(group, to_tell, mask, data_is))
continue;
if (!event) {
event = fsnotify_create_event(to_tell, mask, data,
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index e27960cd76ab9..fc7c4952e6a21 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -86,7 +86,8 @@ static void inotify_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnot
inotify_ignored_and_remove_idr(entry, group);
}
-static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
+static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
+ __u32 mask, int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index e252843710208..61aed0c54fe9e 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -84,7 +84,8 @@ struct fsnotify_event_private_data;
* valid group and inode to use to clean up.
*/
struct fsnotify_ops {
- bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode, __u32 mask);
+ bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
+ __u32 mask, int data_type);
int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
void (*free_group_priv)(struct fsnotify_group *group);
void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index a164600dd82ef..b5417cd65216e 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -919,7 +919,8 @@ static void audit_tree_freeing_mark(struct fsnotify_mark_entry *entry, struct fs
fsnotify_put_mark(entry);
}
-static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
+static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode,
+ __u32 mask, int data_type)
{
return 0;
}
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index f8543a41115b9..67d8f2f52874c 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -505,7 +505,8 @@ void audit_remove_watch_rule(struct audit_krule *krule)
}
}
-static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
+static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
+ __u32 mask, int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
--
GitLab
From 8112e2d6a7356e8c3ff1f7f3c86f375ed0305705 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:21 -0500
Subject: [PATCH 064/863] fsnotify: include data in should_send calls
fanotify is going to need to look at file->private_data to know if an event
should be sent or not. This passes the data (which might be a file,
dentry, inode, or none) to the should_send function calls so fanotify can
get that information when available
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 2 +-
fs/notify/fsnotify.c | 3 ++-
fs/notify/inotify/inotify_fsnotify.c | 2 +-
include/linux/fsnotify_backend.h | 2 +-
kernel/audit_tree.c | 2 +-
kernel/audit_watch.c | 2 +-
6 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 6f30f496e2352..a213b83a59cf2 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -134,7 +134,7 @@ static int dnotify_handle_event(struct fsnotify_group *group,
*/
static bool dnotify_should_send_event(struct fsnotify_group *group,
struct inode *inode, __u32 mask,
- int data_type)
+ void *data, int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index fc06e47893928..523337b600a06 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -157,7 +157,8 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
idx = srcu_read_lock(&fsnotify_grp_srcu);
list_for_each_entry_rcu(group, &fsnotify_groups, group_list) {
if (test_mask & group->mask) {
- if (!group->ops->should_send_event(group, to_tell, mask, data_is))
+ if (!group->ops->should_send_event(group, to_tell, mask,
+ data, data_is))
continue;
if (!event) {
event = fsnotify_create_event(to_tell, mask, data,
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index fc7c4952e6a21..1f33234cc3086 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -87,7 +87,7 @@ static void inotify_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnot
}
static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
- __u32 mask, int data_type)
+ __u32 mask, void *data, int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 61aed0c54fe9e..2766df67f1ec7 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -85,7 +85,7 @@ struct fsnotify_event_private_data;
*/
struct fsnotify_ops {
bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
- __u32 mask, int data_type);
+ __u32 mask, void *data, int data_type);
int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
void (*free_group_priv)(struct fsnotify_group *group);
void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index b5417cd65216e..e3d63b596ef0b 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -920,7 +920,7 @@ static void audit_tree_freeing_mark(struct fsnotify_mark_entry *entry, struct fs
}
static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode,
- __u32 mask, int data_type)
+ __u32 mask, void *data, int data_type)
{
return 0;
}
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 67d8f2f52874c..85c43aa292e0b 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -506,7 +506,7 @@ void audit_remove_watch_rule(struct audit_krule *krule)
}
static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
- __u32 mask, int data_type)
+ __u32 mask, void *data, int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
--
GitLab
From 2a12a9d7814631e918dec93abad856e692d5286d Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:21 -0500
Subject: [PATCH 065/863] fsnotify: pass a file instead of an inode to open,
read, and write
fanotify, the upcoming notification system actually needs a struct path so it can
do opens in the context of listeners, and it needs a file so it can get f_flags
from the original process. Close was the only operation that already was passing
a struct file to the notification hook. This patch passes a file for access,
modify, and open as well as they are easily available to these hooks.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/compat.c | 5 ++---
fs/exec.c | 4 ++--
fs/nfsd/vfs.c | 4 ++--
fs/open.c | 2 +-
fs/read_write.c | 8 ++++----
include/linux/fsnotify.h | 15 +++++++++------
6 files changed, 20 insertions(+), 18 deletions(-)
diff --git a/fs/compat.c b/fs/compat.c
index 6490d2134ff3e..ce02278b9c834 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1193,11 +1193,10 @@ static ssize_t compat_do_readv_writev(int type, struct file *file,
if (iov != iovstack)
kfree(iov);
if ((ret + (type == READ)) > 0) {
- struct dentry *dentry = file->f_path.dentry;
if (type == READ)
- fsnotify_access(dentry);
+ fsnotify_access(file);
else
- fsnotify_modify(dentry);
+ fsnotify_modify(file);
}
return ret;
}
diff --git a/fs/exec.c b/fs/exec.c
index e19de6a80339b..f2de04a01a2aa 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -129,7 +129,7 @@ SYSCALL_DEFINE1(uselib, const char __user *, library)
if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
goto exit;
- fsnotify_open(file->f_path.dentry);
+ fsnotify_open(file);
error = -ENOEXEC;
if(file->f_op) {
@@ -683,7 +683,7 @@ struct file *open_exec(const char *name)
if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
goto exit;
- fsnotify_open(file->f_path.dentry);
+ fsnotify_open(file);
err = deny_write_access(file);
if (err)
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 3c111120b619f..16114a8e79d4f 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -951,7 +951,7 @@ nfsd_vfs_read(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
nfsdstats.io_read += host_err;
*count = host_err;
err = 0;
- fsnotify_access(file->f_path.dentry);
+ fsnotify_access(file);
} else
err = nfserrno(host_err);
out:
@@ -1062,7 +1062,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
goto out_nfserr;
*cnt = host_err;
nfsdstats.io_write += host_err;
- fsnotify_modify(file->f_path.dentry);
+ fsnotify_modify(file);
/* clear setuid/setgid flag after write */
if (inode->i_mode & (S_ISUID | S_ISGID))
diff --git a/fs/open.c b/fs/open.c
index 94d54d3efa8b3..bf082635e2575 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -889,7 +889,7 @@ long do_sys_open(int dfd, const char __user *filename, int flags, int mode)
put_unused_fd(fd);
fd = PTR_ERR(f);
} else {
- fsnotify_open(f->f_path.dentry);
+ fsnotify_open(f);
fd_install(fd, f);
}
}
diff --git a/fs/read_write.c b/fs/read_write.c
index 9c0485236e68d..74e36586e4d30 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -311,7 +311,7 @@ ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
else
ret = do_sync_read(file, buf, count, pos);
if (ret > 0) {
- fsnotify_access(file->f_path.dentry);
+ fsnotify_access(file);
add_rchar(current, ret);
}
inc_syscr(current);
@@ -367,7 +367,7 @@ ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_
else
ret = do_sync_write(file, buf, count, pos);
if (ret > 0) {
- fsnotify_modify(file->f_path.dentry);
+ fsnotify_modify(file);
add_wchar(current, ret);
}
inc_syscw(current);
@@ -675,9 +675,9 @@ static ssize_t do_readv_writev(int type, struct file *file,
kfree(iov);
if ((ret + (type == READ)) > 0) {
if (type == READ)
- fsnotify_access(file->f_path.dentry);
+ fsnotify_access(file);
else
- fsnotify_modify(file->f_path.dentry);
+ fsnotify_modify(file);
}
return ret;
}
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index f958e93feb97f..845e57abfb86b 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -153,8 +153,9 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
/*
* fsnotify_access - file was read
*/
-static inline void fsnotify_access(struct dentry *dentry)
+static inline void fsnotify_access(struct file *file)
{
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
__u32 mask = FS_ACCESS;
@@ -162,14 +163,15 @@ static inline void fsnotify_access(struct dentry *dentry)
mask |= FS_IN_ISDIR;
fsnotify_parent(dentry, mask);
- fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+ fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
/*
* fsnotify_modify - file was modified
*/
-static inline void fsnotify_modify(struct dentry *dentry)
+static inline void fsnotify_modify(struct file *file)
{
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
__u32 mask = FS_MODIFY;
@@ -177,14 +179,15 @@ static inline void fsnotify_modify(struct dentry *dentry)
mask |= FS_IN_ISDIR;
fsnotify_parent(dentry, mask);
- fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+ fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
/*
* fsnotify_open - file was opened
*/
-static inline void fsnotify_open(struct dentry *dentry)
+static inline void fsnotify_open(struct file *file)
{
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
__u32 mask = FS_OPEN;
@@ -192,7 +195,7 @@ static inline void fsnotify_open(struct dentry *dentry)
mask |= FS_IN_ISDIR;
fsnotify_parent(dentry, mask);
- fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+ fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
/*
--
GitLab
From 28c60e37f874dcbb93c4afc839ba5e4911c4f4bc Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:21 -0500
Subject: [PATCH 066/863] fsnotify: send struct file when sending events to
parents when possible
fanotify needs a path in order to open an fd to the object which changed.
Currently notifications to inode's parents are done using only the inode.
For some parental notification we have the entire file, send that so
fanotify can use it.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 13 ++++++++---
include/linux/fsnotify.h | 40 +++++++++++++++++---------------
include/linux/fsnotify_backend.h | 4 ++--
3 files changed, 33 insertions(+), 24 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 523337b600a06..806beede24a37 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -78,13 +78,16 @@ void __fsnotify_update_child_dentry_flags(struct inode *inode)
}
/* Notify this dentry's parent about a child's events. */
-void __fsnotify_parent(struct dentry *dentry, __u32 mask)
+void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
{
struct dentry *parent;
struct inode *p_inode;
bool send = false;
bool should_update_children = false;
+ if (file)
+ dentry = file->f_path.dentry;
+
if (!(dentry->d_flags & DCACHE_FSNOTIFY_PARENT_WATCHED))
return;
@@ -115,8 +118,12 @@ void __fsnotify_parent(struct dentry *dentry, __u32 mask)
* specifies these are events which came from a child. */
mask |= FS_EVENT_ON_CHILD;
- fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
- dentry->d_name.name, 0);
+ if (file)
+ fsnotify(p_inode, mask, file, FSNOTIFY_EVENT_FILE,
+ dentry->d_name.name, 0);
+ else
+ fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
+ dentry->d_name.name, 0);
dput(parent);
}
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 845e57abfb86b..04ea03ea80905 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -26,9 +26,14 @@ static inline void fsnotify_d_instantiate(struct dentry *entry,
}
/* Notify this dentry's parent about a child's events. */
-static inline void fsnotify_parent(struct dentry *dentry, __u32 mask)
+static inline void fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
{
- __fsnotify_parent(dentry, mask);
+ BUG_ON(file && dentry);
+
+ if (file)
+ dentry = file->f_path.dentry;
+
+ __fsnotify_parent(file, dentry, mask);
}
/*
@@ -102,7 +107,7 @@ static inline void fsnotify_nameremove(struct dentry *dentry, int isdir)
if (isdir)
mask |= FS_IN_ISDIR;
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(NULL, dentry, mask);
}
/*
@@ -155,14 +160,13 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
*/
static inline void fsnotify_access(struct file *file)
{
- struct dentry *dentry = file->f_path.dentry;
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
__u32 mask = FS_ACCESS;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(file, NULL, mask);
fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
@@ -171,14 +175,13 @@ static inline void fsnotify_access(struct file *file)
*/
static inline void fsnotify_modify(struct file *file)
{
- struct dentry *dentry = file->f_path.dentry;
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
__u32 mask = FS_MODIFY;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(file, NULL, mask);
fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
@@ -187,14 +190,13 @@ static inline void fsnotify_modify(struct file *file)
*/
static inline void fsnotify_open(struct file *file)
{
- struct dentry *dentry = file->f_path.dentry;
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
__u32 mask = FS_OPEN;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(file, NULL, mask);
fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
@@ -203,15 +205,14 @@ static inline void fsnotify_open(struct file *file)
*/
static inline void fsnotify_close(struct file *file)
{
- struct dentry *dentry = file->f_path.dentry;
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
fmode_t mode = file->f_mode;
__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(file, NULL, mask);
fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
@@ -226,7 +227,7 @@ static inline void fsnotify_xattr(struct dentry *dentry)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(dentry, mask);
+ fsnotify_parent(NULL, dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
@@ -260,7 +261,8 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
if (mask) {
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(dentry, mask);
+
+ fsnotify_parent(NULL, dentry, mask);
fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
}
}
@@ -283,7 +285,7 @@ static inline void fsnotify_oldname_free(const char *old_name)
kfree(old_name);
}
-#else /* CONFIG_INOTIFY || CONFIG_FSNOTIFY */
+#else /* CONFIG_FSNOTIFY */
static inline const char *fsnotify_oldname_init(const char *name)
{
@@ -294,6 +296,6 @@ static inline void fsnotify_oldname_free(const char *old_name)
{
}
-#endif /* ! CONFIG_INOTIFY */
+#endif /* CONFIG_FSNOTIFY */
#endif /* _LINUX_FS_NOTIFY_H */
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 2766df67f1ec7..0e0c2b76b0678 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -259,7 +259,7 @@ struct fsnotify_mark_entry {
/* main fsnotify call to send events */
extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
const char *name, u32 cookie);
-extern void __fsnotify_parent(struct dentry *dentry, __u32 mask);
+extern void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask);
extern void __fsnotify_inode_delete(struct inode *inode);
extern u32 fsnotify_get_cookie(void);
@@ -367,7 +367,7 @@ static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int d
const char *name, u32 cookie)
{}
-static inline void __fsnotify_parent(struct dentry *dentry, __u32 mask)
+static inline void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
{}
static inline void __fsnotify_inode_delete(struct inode *inode)
--
GitLab
From 74766bbfa99adf8cb8119df6121851edba21c9d9 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:21 -0500
Subject: [PATCH 067/863] fsnotify: per group notification queue merge types
inotify only wishes to merge a new event with the last event on the
notification fifo. fanotify is willing to merge any events including by
means of bitwise OR masks of multiple events together. This patch moves
the inotify event merging logic out of the generic fsnotify notification.c
and into the inotify code. This allows each use of fsnotify to provide
their own merge functionality.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_fsnotify.c | 56 ++++++++++++++++++++-
fs/notify/inotify/inotify_user.c | 2 +-
fs/notify/notification.c | 73 ++++++++--------------------
include/linux/fsnotify_backend.h | 6 ++-
4 files changed, 79 insertions(+), 58 deletions(-)
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 1f33234cc3086..0a0f5d0f0d0af 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -32,6 +32,60 @@
#include "inotify.h"
+/*
+ * Check if 2 events contain the same information. We do not compare private data
+ * but at this moment that isn't a problem for any know fsnotify listeners.
+ */
+static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new)
+{
+ if ((old->mask == new->mask) &&
+ (old->to_tell == new->to_tell) &&
+ (old->data_type == new->data_type) &&
+ (old->name_len == new->name_len)) {
+ switch (old->data_type) {
+ case (FSNOTIFY_EVENT_INODE):
+ /* remember, after old was put on the wait_q we aren't
+ * allowed to look at the inode any more, only thing
+ * left to check was if the file_name is the same */
+ if (!old->name_len ||
+ !strcmp(old->file_name, new->file_name))
+ return true;
+ break;
+ case (FSNOTIFY_EVENT_PATH):
+ if ((old->path.mnt == new->path.mnt) &&
+ (old->path.dentry == new->path.dentry))
+ return true;
+ break;
+ case (FSNOTIFY_EVENT_NONE):
+ if (old->mask & FS_Q_OVERFLOW)
+ return true;
+ else if (old->mask & FS_IN_IGNORED)
+ return false;
+ return true;
+ };
+ }
+ return false;
+}
+
+static int inotify_merge(struct list_head *list, struct fsnotify_event *event)
+{
+ struct fsnotify_event_holder *last_holder;
+ struct fsnotify_event *last_event;
+ int ret = 0;
+
+ /* and the list better be locked by something too */
+ spin_lock(&event->lock);
+
+ last_holder = list_entry(list->prev, struct fsnotify_event_holder, event_list);
+ last_event = last_holder->event;
+ if (event_compare(last_event, event))
+ ret = -EEXIST;
+
+ spin_unlock(&event->lock);
+
+ return ret;
+}
+
static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
{
struct fsnotify_mark_entry *entry;
@@ -62,7 +116,7 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
fsn_event_priv->group = group;
event_priv->wd = wd;
- ret = fsnotify_add_notify_event(group, event, fsn_event_priv);
+ ret = fsnotify_add_notify_event(group, event, fsn_event_priv, inotify_merge);
if (ret) {
inotify_free_event_priv(fsn_event_priv);
/* EEXIST says we tail matched, EOVERFLOW isn't something
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index f2b542479e91b..cbe16df326f8d 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -531,7 +531,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
fsn_event_priv->group = group;
event_priv->wd = ientry->wd;
- ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
+ ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv, NULL);
if (ret)
inotify_free_event_priv(fsn_event_priv);
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index b34ce7ad04091..6dc96b35e4a75 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -104,7 +104,8 @@ struct fsnotify_event_holder *fsnotify_alloc_event_holder(void)
void fsnotify_destroy_event_holder(struct fsnotify_event_holder *holder)
{
- kmem_cache_free(fsnotify_event_holder_cachep, holder);
+ if (holder)
+ kmem_cache_free(fsnotify_event_holder_cachep, holder);
}
/*
@@ -128,54 +129,18 @@ struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnot
return priv;
}
-/*
- * Check if 2 events contain the same information. We do not compare private data
- * but at this moment that isn't a problem for any know fsnotify listeners.
- */
-static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new)
-{
- if ((old->mask == new->mask) &&
- (old->to_tell == new->to_tell) &&
- (old->data_type == new->data_type) &&
- (old->name_len == new->name_len)) {
- switch (old->data_type) {
- case (FSNOTIFY_EVENT_INODE):
- /* remember, after old was put on the wait_q we aren't
- * allowed to look at the inode any more, only thing
- * left to check was if the file_name is the same */
- if (!old->name_len ||
- !strcmp(old->file_name, new->file_name))
- return true;
- break;
- case (FSNOTIFY_EVENT_PATH):
- if ((old->path.mnt == new->path.mnt) &&
- (old->path.dentry == new->path.dentry))
- return true;
- break;
- case (FSNOTIFY_EVENT_NONE):
- if (old->mask & FS_Q_OVERFLOW)
- return true;
- else if (old->mask & FS_IN_IGNORED)
- return false;
- return false;
- };
- }
- return false;
-}
-
/*
* Add an event to the group notification queue. The group can later pull this
* event off the queue to deal with. If the event is successfully added to the
* group's notification queue, a reference is taken on event.
*/
int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
- struct fsnotify_event_private_data *priv)
+ struct fsnotify_event_private_data *priv,
+ int (*merge)(struct list_head *, struct fsnotify_event *))
{
struct fsnotify_event_holder *holder = NULL;
struct list_head *list = &group->notification_list;
- struct fsnotify_event_holder *last_holder;
- struct fsnotify_event *last_event;
- int ret = 0;
+ int rc = 0;
/*
* There is one fsnotify_event_holder embedded inside each fsnotify_event.
@@ -196,11 +161,23 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
if (group->q_len >= group->max_events) {
event = q_overflow_event;
- ret = -EOVERFLOW;
+ rc = -EOVERFLOW;
/* sorry, no private data on the overflow event */
priv = NULL;
}
+ if (!list_empty(list) && merge) {
+ int ret;
+
+ ret = merge(list, event);
+ if (ret) {
+ mutex_unlock(&group->notification_mutex);
+ if (holder != &event->holder)
+ fsnotify_destroy_event_holder(holder);
+ return ret;
+ }
+ }
+
spin_lock(&event->lock);
if (list_empty(&event->holder.event_list)) {
@@ -215,18 +192,6 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
goto alloc_holder;
}
- if (!list_empty(list)) {
- last_holder = list_entry(list->prev, struct fsnotify_event_holder, event_list);
- last_event = last_holder->event;
- if (event_compare(last_event, event)) {
- spin_unlock(&event->lock);
- mutex_unlock(&group->notification_mutex);
- if (holder != &event->holder)
- fsnotify_destroy_event_holder(holder);
- return -EEXIST;
- }
- }
-
group->q_len++;
holder->event = event;
@@ -238,7 +203,7 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
mutex_unlock(&group->notification_mutex);
wake_up(&group->notification_waitq);
- return ret;
+ return rc;
}
/*
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 0e0c2b76b0678..25789d45fad8d 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -328,8 +328,10 @@ extern struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struc
struct fsnotify_event *event);
/* attach the event to the group notification queue */
-extern int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
- struct fsnotify_event_private_data *priv);
+extern int fsnotify_add_notify_event(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ struct fsnotify_event_private_data *priv,
+ int (*merge)(struct list_head *, struct fsnotify_event *));
/* true if the group notification queue is empty */
extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group);
/* return, but do not dequeue the first event on the notification queue */
--
GitLab
From b4e4e1407312ae5a267ed7d716e6d4e7120a8430 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:21 -0500
Subject: [PATCH 068/863] fsnotify: clone existing events
fsnotify_clone_event will take an event, clone it, and return the cloned
event to the caller. Since events may be in use by multiple fsnotify
groups simultaneously certain event entries (such as the mask) cannot be
changed after the event was created. Since fanotify would like to merge
events happening on the same file it needs a new clean event to work with
so it can change any fields it wishes.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/notification.c | 29 +++++++++++++++++++++++++----
include/linux/fsnotify_backend.h | 3 +++
2 files changed, 28 insertions(+), 4 deletions(-)
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 6dc96b35e4a75..bc9470c7ece7f 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -284,11 +284,33 @@ static void initialize_event(struct fsnotify_event *event)
spin_lock_init(&event->lock);
- event->data_type = FSNOTIFY_EVENT_NONE;
-
INIT_LIST_HEAD(&event->private_data_list);
}
+struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event)
+{
+ struct fsnotify_event *event;
+
+ event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+ if (!event)
+ return NULL;
+
+ memcpy(event, old_event, sizeof(*event));
+ initialize_event(event);
+
+ if (event->name_len) {
+ event->file_name = kstrdup(old_event->file_name, GFP_KERNEL);
+ if (!event->file_name) {
+ kmem_cache_free(fsnotify_event_cachep, event);
+ return NULL;
+ }
+ }
+ if (event->data_type == FSNOTIFY_EVENT_PATH)
+ path_get(&event->path);
+
+ return event;
+}
+
/*
* fsnotify_create_event - Allocate a new event which will be sent to each
* group's handle_event function if the group was interested in this
@@ -324,6 +346,7 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
event->sync_cookie = cookie;
event->to_tell = to_tell;
+ event->data_type = data_type;
switch (data_type) {
case FSNOTIFY_EVENT_FILE: {
@@ -340,12 +363,10 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
event->path.dentry = path->dentry;
event->path.mnt = path->mnt;
path_get(&event->path);
- event->data_type = FSNOTIFY_EVENT_PATH;
break;
}
case FSNOTIFY_EVENT_INODE:
event->inode = data;
- event->data_type = FSNOTIFY_EVENT_INODE;
break;
case FSNOTIFY_EVENT_NONE:
event->inode = NULL;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 25789d45fad8d..3a7fff235539f 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -363,6 +363,9 @@ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32
void *data, int data_is, const char *name,
u32 cookie, gfp_t gfp);
+/* fanotify likes to change events after they are on lists... */
+extern struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event);
+
#else
static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
--
GitLab
From 1201a5361b9bd6512ae01e6f2b7aa79d458cafb1 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:22 -0500
Subject: [PATCH 069/863] fsnotify: replace an event on a list
fanotify would like to clone events already on its notification list, make
changes to the new event, and then replace the old event on the list with
the new event. This patch implements the replace functionality of that
process.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/notification.c | 56 ++++++++++++++++++++++++++++++++
include/linux/fsnotify_backend.h | 2 ++
2 files changed, 58 insertions(+)
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index bc9470c7ece7f..b493c378445fb 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -287,6 +287,62 @@ static void initialize_event(struct fsnotify_event *event)
INIT_LIST_HEAD(&event->private_data_list);
}
+/*
+ * Caller damn well better be holding whatever mutex is protecting the
+ * old_holder->event_list.
+ */
+int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
+ struct fsnotify_event *new_event)
+{
+ struct fsnotify_event *old_event = old_holder->event;
+ struct fsnotify_event_holder *new_holder = NULL;
+
+ /*
+ * There is one fsnotify_event_holder embedded inside each fsnotify_event.
+ * Check if we expect to be able to use that holder. If not alloc a new
+ * holder.
+ * For the overflow event it's possible that something will use the in
+ * event holder before we get the lock so we may need to jump back and
+ * alloc a new holder, this can't happen for most events...
+ */
+ if (!list_empty(&new_event->holder.event_list)) {
+alloc_holder:
+ new_holder = fsnotify_alloc_event_holder();
+ if (!new_holder)
+ return -ENOMEM;
+ }
+
+ spin_lock(&old_event->lock);
+ spin_lock(&new_event->lock);
+
+ if (list_empty(&new_event->holder.event_list)) {
+ if (unlikely(new_holder))
+ fsnotify_destroy_event_holder(new_holder);
+ new_holder = &new_event->holder;
+ } else if (unlikely(!new_holder)) {
+ /* between the time we checked above and got the lock the in
+ * event holder was used, go back and get a new one */
+ spin_unlock(&new_event->lock);
+ spin_unlock(&old_event->lock);
+ goto alloc_holder;
+ }
+
+ new_holder->event = new_event;
+ list_replace_init(&old_holder->event_list, &new_holder->event_list);
+
+ spin_unlock(&new_event->lock);
+ spin_unlock(&old_event->lock);
+
+ /* event == holder means we are referenced through the in event holder */
+ if (old_holder != &old_event->holder)
+ fsnotify_destroy_event_holder(old_holder);
+
+ fsnotify_get_event(new_event); /* on the list take reference */
+ fsnotify_put_event(old_event); /* off the list, drop reference */
+
+ return 0;
+}
+
struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event)
{
struct fsnotify_event *event;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 3a7fff235539f..427f6ffab127d 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -365,6 +365,8 @@ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32
/* fanotify likes to change events after they are on lists... */
extern struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event);
+extern int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
+ struct fsnotify_event *new_event);
#else
--
GitLab
From cac69dad32899c6f4c66bb4f9baf69b0d3c7d3d1 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:22 -0500
Subject: [PATCH 070/863] fsnotify: lock annotation for event replacement
fsnotify_replace_event need to lock both the old and the new event. This
causes lockdep to get all pissed off since it dosn't know this is safe.
It's safe in this case since the new event is impossible to be reached from
other places in the kernel.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/notification.c | 41 +++++++++++++---------------------------
1 file changed, 13 insertions(+), 28 deletions(-)
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index b493c378445fb..dafd0b7687b8b 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -289,43 +289,28 @@ static void initialize_event(struct fsnotify_event *event)
/*
* Caller damn well better be holding whatever mutex is protecting the
- * old_holder->event_list.
+ * old_holder->event_list and the new_event must be a clean event which
+ * cannot be found anywhere else in the kernel.
*/
int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
struct fsnotify_event *new_event)
{
struct fsnotify_event *old_event = old_holder->event;
- struct fsnotify_event_holder *new_holder = NULL;
+ struct fsnotify_event_holder *new_holder = &new_event->holder;
+
+ enum event_spinlock_class {
+ SPINLOCK_OLD,
+ SPINLOCK_NEW,
+ };
/*
- * There is one fsnotify_event_holder embedded inside each fsnotify_event.
- * Check if we expect to be able to use that holder. If not alloc a new
- * holder.
- * For the overflow event it's possible that something will use the in
- * event holder before we get the lock so we may need to jump back and
- * alloc a new holder, this can't happen for most events...
+ * if the new_event's embedded holder is in use someone
+ * screwed up and didn't give us a clean new event.
*/
- if (!list_empty(&new_event->holder.event_list)) {
-alloc_holder:
- new_holder = fsnotify_alloc_event_holder();
- if (!new_holder)
- return -ENOMEM;
- }
+ BUG_ON(!list_empty(&new_holder->event_list));
- spin_lock(&old_event->lock);
- spin_lock(&new_event->lock);
-
- if (list_empty(&new_event->holder.event_list)) {
- if (unlikely(new_holder))
- fsnotify_destroy_event_holder(new_holder);
- new_holder = &new_event->holder;
- } else if (unlikely(!new_holder)) {
- /* between the time we checked above and got the lock the in
- * event holder was used, go back and get a new one */
- spin_unlock(&new_event->lock);
- spin_unlock(&old_event->lock);
- goto alloc_holder;
- }
+ spin_lock_nested(&old_event->lock, SPINLOCK_OLD);
+ spin_lock_nested(&new_event->lock, SPINLOCK_NEW);
new_holder->event = new_event;
list_replace_init(&old_holder->event_list, &new_holder->event_list);
--
GitLab
From 74be0cc82835aecad332a29896b0f212ba893403 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:22 -0500
Subject: [PATCH 071/863] fsnotify: remove group_num altogether
The original fsnotify interface has a group-num which was intended to be
able to find a group after it was added. I no longer think this is a
necessary thing to do and so we remove the group_num.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 3 +-
fs/notify/group.c | 48 ++------------------------------
fs/notify/inotify/inotify_user.c | 11 +-------
include/linux/fsnotify_backend.h | 10 +------
kernel/audit_tree.c | 3 +-
kernel/audit_watch.c | 2 +-
6 files changed, 7 insertions(+), 70 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index a213b83a59cf2..1f46aeac3387f 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -433,8 +433,7 @@ static int __init dnotify_init(void)
dnotify_struct_cache = KMEM_CACHE(dnotify_struct, SLAB_PANIC);
dnotify_mark_entry_cache = KMEM_CACHE(dnotify_mark_entry, SLAB_PANIC);
- dnotify_group = fsnotify_obtain_group(DNOTIFY_GROUP_NUM,
- 0, &dnotify_fsnotify_ops);
+ dnotify_group = fsnotify_obtain_group(0, &dnotify_fsnotify_ops);
if (IS_ERR(dnotify_group))
panic("unable to allocate fsnotify group for dnotify\n");
return 0;
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 777ca82122559..62fb8961a57be 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -77,15 +77,6 @@ void fsnotify_recalc_group_mask(struct fsnotify_group *group)
fsnotify_recalc_global_mask();
}
-/*
- * Take a reference to a group so things found under the fsnotify_grp_mutex
- * can't get freed under us
- */
-static void fsnotify_get_group(struct fsnotify_group *group)
-{
- atomic_inc(&group->refcnt);
-}
-
/*
* Final freeing of a group
*/
@@ -170,41 +161,15 @@ void fsnotify_put_group(struct fsnotify_group *group)
fsnotify_destroy_group(group);
}
-/*
- * Simply run the fsnotify_groups list and find a group which matches
- * the given parameters. If a group is found we take a reference to that
- * group.
- */
-static struct fsnotify_group *fsnotify_find_group(unsigned int group_num, __u32 mask,
- const struct fsnotify_ops *ops)
-{
- struct fsnotify_group *group_iter;
- struct fsnotify_group *group = NULL;
-
- BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
-
- list_for_each_entry_rcu(group_iter, &fsnotify_groups, group_list) {
- if (group_iter->group_num == group_num) {
- if ((group_iter->mask == mask) &&
- (group_iter->ops == ops)) {
- fsnotify_get_group(group_iter);
- group = group_iter;
- } else
- group = ERR_PTR(-EEXIST);
- }
- }
- return group;
-}
-
/*
* Either finds an existing group which matches the group_num, mask, and ops or
* creates a new group and adds it to the global group list. In either case we
* take a reference for the group returned.
*/
-struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, __u32 mask,
+struct fsnotify_group *fsnotify_obtain_group(__u32 mask,
const struct fsnotify_ops *ops)
{
- struct fsnotify_group *group, *tgroup;
+ struct fsnotify_group *group;
/* very low use, simpler locking if we just always alloc */
group = kzalloc(sizeof(struct fsnotify_group), GFP_KERNEL);
@@ -214,7 +179,6 @@ struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, __u32 mask,
atomic_set(&group->refcnt, 1);
group->on_group_list = 0;
- group->group_num = group_num;
group->mask = mask;
mutex_init(&group->notification_mutex);
@@ -230,14 +194,6 @@ struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, __u32 mask,
group->ops = ops;
mutex_lock(&fsnotify_grp_mutex);
- tgroup = fsnotify_find_group(group_num, mask, ops);
- if (tgroup) {
- /* group already exists */
- mutex_unlock(&fsnotify_grp_mutex);
- /* destroy the new one we made */
- fsnotify_put_group(group);
- return tgroup;
- }
/* group not found, add a new one */
list_add_rcu(&group->group_list, &fsnotify_groups);
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index cbe16df326f8d..cae317f5bd9dc 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -51,12 +51,6 @@ int inotify_max_user_watches __read_mostly;
static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
struct kmem_cache *event_priv_cachep __read_mostly;
-/*
- * When inotify registers a new group it increments this and uses that
- * value as an offset to set the fsnotify group "name" and priority.
- */
-static atomic_t inotify_grp_num;
-
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
@@ -700,11 +694,8 @@ static int inotify_update_watch(struct fsnotify_group *group, struct inode *inod
static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsigned int max_events)
{
struct fsnotify_group *group;
- unsigned int grp_num;
- /* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */
- grp_num = (INOTIFY_GROUP_NUM - atomic_inc_return(&inotify_grp_num));
- group = fsnotify_obtain_group(grp_num, 0, &inotify_fsnotify_ops);
+ group = fsnotify_obtain_group(0, &inotify_fsnotify_ops);
if (IS_ERR(group))
return group;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 427f6ffab127d..57e503d017c83 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -60,12 +60,6 @@
#define FS_MOVE (FS_MOVED_FROM | FS_MOVED_TO)
-/* listeners that hard code group numbers near the top */
-#define DNOTIFY_GROUP_NUM UINT_MAX
-#define AUDIT_WATCH_GROUP_NUM (DNOTIFY_GROUP_NUM-1)
-#define AUDIT_TREE_GROUP_NUM (AUDIT_WATCH_GROUP_NUM-1)
-#define INOTIFY_GROUP_NUM (AUDIT_TREE_GROUP_NUM-1)
-
struct fsnotify_group;
struct fsnotify_event;
struct fsnotify_mark_entry;
@@ -124,7 +118,6 @@ struct fsnotify_group {
* closed.
*/
atomic_t refcnt; /* things with interest in this group */
- unsigned int group_num; /* simply prevents accidental group collision */
const struct fsnotify_ops *ops; /* how this group handles things */
@@ -312,8 +305,7 @@ static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode
/* must call when a group changes its ->mask */
extern void fsnotify_recalc_global_mask(void);
/* get a reference to an existing or create a new group */
-extern struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num,
- __u32 mask,
+extern struct fsnotify_group *fsnotify_obtain_group(__u32 mask,
const struct fsnotify_ops *ops);
/* run all marks associated with this group and update group->mask */
extern void fsnotify_recalc_group_mask(struct fsnotify_group *group);
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index e3d63b596ef0b..59065e72a2eb1 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -937,8 +937,7 @@ static int __init audit_tree_init(void)
{
int i;
- audit_tree_group = fsnotify_obtain_group(AUDIT_TREE_GROUP_NUM,
- 0, &audit_tree_ops);
+ audit_tree_group = fsnotify_obtain_group(0, &audit_tree_ops);
if (IS_ERR(audit_tree_group))
audit_panic("cannot initialize fsnotify group for rectree watches");
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 85c43aa292e0b..c500104d38c20 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -577,7 +577,7 @@ static const struct fsnotify_ops audit_watch_fsnotify_ops = {
static int __init audit_watch_init(void)
{
- audit_watch_group = fsnotify_obtain_group(AUDIT_WATCH_GROUP_NUM, AUDIT_FS_WATCH,
+ audit_watch_group = fsnotify_obtain_group(AUDIT_FS_WATCH,
&audit_watch_fsnotify_ops);
if (IS_ERR(audit_watch_group)) {
audit_watch_group = NULL;
--
GitLab
From cd7752ce7cac5184ca35aecebffafae9662570bc Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:22 -0500
Subject: [PATCH 072/863] fsnotify: fsnotify_obtain_group kzalloc cleanup
fsnotify_obtain_group uses kzalloc but then proceedes to set things to 0.
This patch just deletes those useless lines.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/group.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 62fb8961a57be..934860e980955 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -178,17 +178,14 @@ struct fsnotify_group *fsnotify_obtain_group(__u32 mask,
atomic_set(&group->refcnt, 1);
- group->on_group_list = 0;
group->mask = mask;
mutex_init(&group->notification_mutex);
INIT_LIST_HEAD(&group->notification_list);
init_waitqueue_head(&group->notification_waitq);
- group->q_len = 0;
group->max_events = UINT_MAX;
spin_lock_init(&group->mark_lock);
- atomic_set(&group->num_marks, 0);
INIT_LIST_HEAD(&group->mark_entries);
group->ops = ops;
--
GitLab
From ffab83402f01555a5fa32efb48a4dd0ce8d12ef5 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:22 -0500
Subject: [PATCH 073/863] fsnotify: fsnotify_obtain_group should be
fsnotify_alloc_group
fsnotify_obtain_group was intended to be able to find an already existing
group. Nothing uses that functionality. This just renames it to
fsnotify_alloc_group so it is clear what it is doing.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 2 +-
fs/notify/group.c | 10 +++-------
fs/notify/inotify/inotify_user.c | 2 +-
include/linux/fsnotify_backend.h | 4 ++--
kernel/audit_tree.c | 2 +-
kernel/audit_watch.c | 4 ++--
6 files changed, 10 insertions(+), 14 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 1f46aeac3387f..51e4fe33d6bb2 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -433,7 +433,7 @@ static int __init dnotify_init(void)
dnotify_struct_cache = KMEM_CACHE(dnotify_struct, SLAB_PANIC);
dnotify_mark_entry_cache = KMEM_CACHE(dnotify_mark_entry, SLAB_PANIC);
- dnotify_group = fsnotify_obtain_group(0, &dnotify_fsnotify_ops);
+ dnotify_group = fsnotify_alloc_group(0, &dnotify_fsnotify_ops);
if (IS_ERR(dnotify_group))
panic("unable to allocate fsnotify group for dnotify\n");
return 0;
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 934860e980955..1d20d26d5fee1 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -162,16 +162,13 @@ void fsnotify_put_group(struct fsnotify_group *group)
}
/*
- * Either finds an existing group which matches the group_num, mask, and ops or
- * creates a new group and adds it to the global group list. In either case we
- * take a reference for the group returned.
+ * Create a new fsnotify_group and hold a reference for the group returned.
*/
-struct fsnotify_group *fsnotify_obtain_group(__u32 mask,
- const struct fsnotify_ops *ops)
+struct fsnotify_group *fsnotify_alloc_group(__u32 mask,
+ const struct fsnotify_ops *ops)
{
struct fsnotify_group *group;
- /* very low use, simpler locking if we just always alloc */
group = kzalloc(sizeof(struct fsnotify_group), GFP_KERNEL);
if (!group)
return ERR_PTR(-ENOMEM);
@@ -192,7 +189,6 @@ struct fsnotify_group *fsnotify_obtain_group(__u32 mask,
mutex_lock(&fsnotify_grp_mutex);
- /* group not found, add a new one */
list_add_rcu(&group->group_list, &fsnotify_groups);
group->on_group_list = 1;
/* being on the fsnotify_groups list holds one num_marks */
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index cae317f5bd9dc..25a2854186e91 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -695,7 +695,7 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign
{
struct fsnotify_group *group;
- group = fsnotify_obtain_group(0, &inotify_fsnotify_ops);
+ group = fsnotify_alloc_group(0, &inotify_fsnotify_ops);
if (IS_ERR(group))
return group;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 57e503d017c83..7d3c03e46862e 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -305,11 +305,11 @@ static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode
/* must call when a group changes its ->mask */
extern void fsnotify_recalc_global_mask(void);
/* get a reference to an existing or create a new group */
-extern struct fsnotify_group *fsnotify_obtain_group(__u32 mask,
+extern struct fsnotify_group *fsnotify_alloc_group(__u32 mask,
const struct fsnotify_ops *ops);
/* run all marks associated with this group and update group->mask */
extern void fsnotify_recalc_group_mask(struct fsnotify_group *group);
-/* drop reference on a group from fsnotify_obtain_group */
+/* drop reference on a group from fsnotify_alloc_group */
extern void fsnotify_put_group(struct fsnotify_group *group);
/* take a reference to an event */
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 59065e72a2eb1..813274d4edada 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -937,7 +937,7 @@ static int __init audit_tree_init(void)
{
int i;
- audit_tree_group = fsnotify_obtain_group(0, &audit_tree_ops);
+ audit_tree_group = fsnotify_alloc_group(0, &audit_tree_ops);
if (IS_ERR(audit_tree_group))
audit_panic("cannot initialize fsnotify group for rectree watches");
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index c500104d38c20..0f03a6ab96edf 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -577,8 +577,8 @@ static const struct fsnotify_ops audit_watch_fsnotify_ops = {
static int __init audit_watch_init(void)
{
- audit_watch_group = fsnotify_obtain_group(AUDIT_FS_WATCH,
- &audit_watch_fsnotify_ops);
+ audit_watch_group = fsnotify_alloc_group(AUDIT_FS_WATCH,
+ &audit_watch_fsnotify_ops);
if (IS_ERR(audit_watch_group)) {
audit_watch_group = NULL;
audit_panic("cannot create audit fsnotify group");
--
GitLab
From 220d14df0dc587c06b97762829a41157c9375b94 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:22 -0500
Subject: [PATCH 074/863] Audit: only set group mask when something is being
watched
Currently the audit watch group always sets a mask equal to all events it
might care about. We instead should only set the group mask if we are
actually watching inodes. This should be a perf win when audit watches are
compiled in.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
kernel/audit_watch.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 0f03a6ab96edf..87408b2821184 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -167,6 +167,8 @@ static struct audit_parent *audit_init_parent(struct nameidata *ndp)
return ERR_PTR(ret);
}
+ fsnotify_recalc_group_mask(audit_watch_group);
+
return parent;
}
@@ -353,6 +355,9 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
mutex_unlock(&audit_filter_mutex);
fsnotify_destroy_mark_by_entry(&parent->mark);
+
+ fsnotify_recalc_group_mask(audit_watch_group);
+
}
/* Get path information necessary for adding watches. */
@@ -503,6 +508,9 @@ void audit_remove_watch_rule(struct audit_krule *krule)
audit_put_parent(parent);
}
}
+
+ fsnotify_recalc_group_mask(audit_watch_group);
+
}
static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
@@ -577,8 +585,7 @@ static const struct fsnotify_ops audit_watch_fsnotify_ops = {
static int __init audit_watch_init(void)
{
- audit_watch_group = fsnotify_alloc_group(AUDIT_FS_WATCH,
- &audit_watch_fsnotify_ops);
+ audit_watch_group = fsnotify_alloc_group(0, &audit_watch_fsnotify_ops);
if (IS_ERR(audit_watch_group)) {
audit_watch_group = NULL;
audit_panic("cannot create audit fsnotify group");
--
GitLab
From 0d2e2a1d00d7d23e5bd9bb0935cde7c3d5835c56 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:22 -0500
Subject: [PATCH 075/863] fsnotify: drop mask argument from
fsnotify_alloc_group
Nothing uses the mask argument to fsnotify_alloc_group. This patch drops
that argument.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 2 +-
fs/notify/group.c | 8 +-------
fs/notify/inotify/inotify_user.c | 2 +-
include/linux/fsnotify_backend.h | 3 +--
kernel/audit_tree.c | 2 +-
kernel/audit_watch.c | 2 +-
6 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 51e4fe33d6bb2..e0a847bd53bea 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -433,7 +433,7 @@ static int __init dnotify_init(void)
dnotify_struct_cache = KMEM_CACHE(dnotify_struct, SLAB_PANIC);
dnotify_mark_entry_cache = KMEM_CACHE(dnotify_mark_entry, SLAB_PANIC);
- dnotify_group = fsnotify_alloc_group(0, &dnotify_fsnotify_ops);
+ dnotify_group = fsnotify_alloc_group(&dnotify_fsnotify_ops);
if (IS_ERR(dnotify_group))
panic("unable to allocate fsnotify group for dnotify\n");
return 0;
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 1d20d26d5fee1..1657349c30a63 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -164,8 +164,7 @@ void fsnotify_put_group(struct fsnotify_group *group)
/*
* Create a new fsnotify_group and hold a reference for the group returned.
*/
-struct fsnotify_group *fsnotify_alloc_group(__u32 mask,
- const struct fsnotify_ops *ops)
+struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
{
struct fsnotify_group *group;
@@ -175,8 +174,6 @@ struct fsnotify_group *fsnotify_alloc_group(__u32 mask,
atomic_set(&group->refcnt, 1);
- group->mask = mask;
-
mutex_init(&group->notification_mutex);
INIT_LIST_HEAD(&group->notification_list);
init_waitqueue_head(&group->notification_waitq);
@@ -196,8 +193,5 @@ struct fsnotify_group *fsnotify_alloc_group(__u32 mask,
mutex_unlock(&fsnotify_grp_mutex);
- if (mask)
- fsnotify_recalc_global_mask();
-
return group;
}
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 25a2854186e91..a48d68a68b257 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -695,7 +695,7 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign
{
struct fsnotify_group *group;
- group = fsnotify_alloc_group(0, &inotify_fsnotify_ops);
+ group = fsnotify_alloc_group(&inotify_fsnotify_ops);
if (IS_ERR(group))
return group;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 7d3c03e46862e..58326049ab297 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -305,8 +305,7 @@ static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode
/* must call when a group changes its ->mask */
extern void fsnotify_recalc_global_mask(void);
/* get a reference to an existing or create a new group */
-extern struct fsnotify_group *fsnotify_alloc_group(__u32 mask,
- const struct fsnotify_ops *ops);
+extern struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops);
/* run all marks associated with this group and update group->mask */
extern void fsnotify_recalc_group_mask(struct fsnotify_group *group);
/* drop reference on a group from fsnotify_alloc_group */
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 813274d4edada..04f16887406bb 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -937,7 +937,7 @@ static int __init audit_tree_init(void)
{
int i;
- audit_tree_group = fsnotify_alloc_group(0, &audit_tree_ops);
+ audit_tree_group = fsnotify_alloc_group(&audit_tree_ops);
if (IS_ERR(audit_tree_group))
audit_panic("cannot initialize fsnotify group for rectree watches");
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 87408b2821184..83d5f9674ceca 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -585,7 +585,7 @@ static const struct fsnotify_ops audit_watch_fsnotify_ops = {
static int __init audit_watch_init(void)
{
- audit_watch_group = fsnotify_alloc_group(0, &audit_watch_fsnotify_ops);
+ audit_watch_group = fsnotify_alloc_group(&audit_watch_fsnotify_ops);
if (IS_ERR(audit_watch_group)) {
audit_watch_group = NULL;
audit_panic("cannot create audit fsnotify group");
--
GitLab
From 19c2a0e1a2f60112c158342ba5f568f72b741c2c Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:23 -0500
Subject: [PATCH 076/863] fsnotify: rename fsnotify_groups to
fsnotify_inode_groups
Simple renaming patch. fsnotify is about to support mount point listeners
so I am renaming fsnotify_groups and fsnotify_mask to indicate these are lists
used only for groups which have watches on inodes.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 6 +++---
fs/notify/fsnotify.h | 8 ++++----
fs/notify/group.c | 30 +++++++++++++++++++-----------
include/linux/fsnotify_backend.h | 6 +++---
4 files changed, 29 insertions(+), 21 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 806beede24a37..23b5cfbeed50f 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -148,10 +148,10 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
/* global tests shouldn't care about events on child only the specific event */
__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
- if (list_empty(&fsnotify_groups))
+ if (list_empty(&fsnotify_inode_groups))
return;
- if (!(test_mask & fsnotify_mask))
+ if (!(test_mask & fsnotify_inode_mask))
return;
if (!(test_mask & to_tell->i_fsnotify_mask))
@@ -162,7 +162,7 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
* anything other than walk the list so it's crazy to pre-allocate.
*/
idx = srcu_read_lock(&fsnotify_grp_srcu);
- list_for_each_entry_rcu(group, &fsnotify_groups, group_list) {
+ list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list) {
if (test_mask & group->mask) {
if (!group->ops->should_send_event(group, to_tell, mask,
data, data_is))
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index 4dc240824b2df..ec5aee43bdc58 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -8,10 +8,10 @@
/* protects reads of fsnotify_groups */
extern struct srcu_struct fsnotify_grp_srcu;
-/* all groups which receive fsnotify events */
-extern struct list_head fsnotify_groups;
-/* all bitwise OR of all event types (FS_*) for all fsnotify_groups */
-extern __u32 fsnotify_mask;
+/* all groups which receive inode fsnotify events */
+extern struct list_head fsnotify_inode_groups;
+/* all bitwise OR of all event types (FS_*) for all fsnotify_inode_groups */
+extern __u32 fsnotify_inode_mask;
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 1657349c30a63..c80809745312b 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -33,9 +33,9 @@ static DEFINE_MUTEX(fsnotify_grp_mutex);
/* protects reads while running the fsnotify_groups list */
struct srcu_struct fsnotify_grp_srcu;
/* all groups registered to receive filesystem notifications */
-LIST_HEAD(fsnotify_groups);
+LIST_HEAD(fsnotify_inode_groups);
/* bitwise OR of all events (FS_*) interesting to some group on this system */
-__u32 fsnotify_mask;
+__u32 fsnotify_inode_mask;
/*
* When a new group registers or changes it's set of interesting events
@@ -48,10 +48,10 @@ void fsnotify_recalc_global_mask(void)
int idx;
idx = srcu_read_lock(&fsnotify_grp_srcu);
- list_for_each_entry_rcu(group, &fsnotify_groups, group_list)
+ list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list)
mask |= group->mask;
srcu_read_unlock(&fsnotify_grp_srcu, idx);
- fsnotify_mask = mask;
+ fsnotify_inode_mask = mask;
}
/*
@@ -77,6 +77,17 @@ void fsnotify_recalc_group_mask(struct fsnotify_group *group)
fsnotify_recalc_global_mask();
}
+static void fsnotify_add_group(struct fsnotify_group *group)
+{
+ BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
+
+ group->on_inode_group_list = 1;
+ /* being on the fsnotify_groups list holds one num_marks */
+ atomic_inc(&group->num_marks);
+
+ list_add_tail_rcu(&group->inode_group_list, &fsnotify_inode_groups);
+}
+
/*
* Final freeing of a group
*/
@@ -118,9 +129,9 @@ static void __fsnotify_evict_group(struct fsnotify_group *group)
{
BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
- if (group->on_group_list)
- list_del_rcu(&group->group_list);
- group->on_group_list = 0;
+ if (group->on_inode_group_list)
+ list_del_rcu(&group->inode_group_list);
+ group->on_inode_group_list = 0;
}
/*
@@ -186,10 +197,7 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
mutex_lock(&fsnotify_grp_mutex);
- list_add_rcu(&group->group_list, &fsnotify_groups);
- group->on_group_list = 1;
- /* being on the fsnotify_groups list holds one num_marks */
- atomic_inc(&group->num_marks);
+ fsnotify_add_group(group);
mutex_unlock(&fsnotify_grp_mutex);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 58326049ab297..21079ade5620d 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -95,10 +95,10 @@ struct fsnotify_ops {
struct fsnotify_group {
/*
* global list of all groups receiving events from fsnotify.
- * anchored by fsnotify_groups and protected by either fsnotify_grp_mutex
+ * anchored by fsnotify_inode_groups and protected by either fsnotify_grp_mutex
* or fsnotify_grp_srcu depending on write vs read.
*/
- struct list_head group_list;
+ struct list_head inode_group_list;
/*
* Defines all of the event types in which this group is interested.
@@ -136,7 +136,7 @@ struct fsnotify_group {
struct list_head mark_entries; /* all inode mark entries for this group */
/* prevents double list_del of group_list. protected by global fsnotify_grp_mutex */
- bool on_group_list;
+ bool on_inode_group_list;
/* groups can define private fields here or use the void *private */
union {
--
GitLab
From 36fddebaa8a9186d4f5817ab798a83400b2fb2e7 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:23 -0500
Subject: [PATCH 077/863] fsnotify: initialize the group->num_marks in a better
place
Currently the comments say that group->num_marks is held because the group
is on the fsnotify_group list. This isn't strictly the case, we really
just hold the num_marks for the life of the group (any time group->refcnt
is != 0) This patch moves the initialization stuff and makes it clear when
it is really being held.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/group.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/fs/notify/group.c b/fs/notify/group.c
index c80809745312b..656c534ffb666 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -82,9 +82,6 @@ static void fsnotify_add_group(struct fsnotify_group *group)
BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
group->on_inode_group_list = 1;
- /* being on the fsnotify_groups list holds one num_marks */
- atomic_inc(&group->num_marks);
-
list_add_tail_rcu(&group->inode_group_list, &fsnotify_inode_groups);
}
@@ -183,7 +180,14 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
if (!group)
return ERR_PTR(-ENOMEM);
+ /* set to 0 when there a no external references to this group */
atomic_set(&group->refcnt, 1);
+ /*
+ * hits 0 when there are no external references AND no marks for
+ * this group
+ */
+ atomic_set(&group->num_marks, 1);
+
mutex_init(&group->notification_mutex);
INIT_LIST_HEAD(&group->notification_list);
--
GitLab
From 4ca763523e040dc61191d4866a82981a5d30a4e9 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:23 -0500
Subject: [PATCH 078/863] fsnotify: add groups to fsnotify_inode_groups when
registering inode watch
Currently all fsnotify groups are added immediately to the
fsnotify_inode_groups list upon creation. This means, even groups with no
watches (common for audit) will be on the global tracking list and will
get checked for every event. This patch adds groups to the global list on
when the first inode mark is added to the group.
Signed-of-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.h | 2 ++
fs/notify/group.c | 18 ++++++++----------
fs/notify/inode_mark.c | 7 +++++++
3 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index ec5aee43bdc58..5bd22412017f1 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -16,6 +16,8 @@ extern __u32 fsnotify_inode_mask;
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
+/* add a group to the inode group list */
+extern void fsnotify_add_inode_group(struct fsnotify_group *group);
/* final kfree of a group */
extern void fsnotify_final_destroy_group(struct fsnotify_group *group);
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 656c534ffb666..34fccbd2809ce 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -77,12 +77,15 @@ void fsnotify_recalc_group_mask(struct fsnotify_group *group)
fsnotify_recalc_global_mask();
}
-static void fsnotify_add_group(struct fsnotify_group *group)
+void fsnotify_add_inode_group(struct fsnotify_group *group)
{
- BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
+ mutex_lock(&fsnotify_grp_mutex);
+ if (!group->on_inode_group_list)
+ list_add_tail_rcu(&group->inode_group_list, &fsnotify_inode_groups);
group->on_inode_group_list = 1;
- list_add_tail_rcu(&group->inode_group_list, &fsnotify_inode_groups);
+
+ mutex_unlock(&fsnotify_grp_mutex);
}
/*
@@ -188,22 +191,17 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
*/
atomic_set(&group->num_marks, 1);
-
mutex_init(&group->notification_mutex);
INIT_LIST_HEAD(&group->notification_list);
init_waitqueue_head(&group->notification_waitq);
group->max_events = UINT_MAX;
+ INIT_LIST_HEAD(&group->inode_group_list);
+
spin_lock_init(&group->mark_lock);
INIT_LIST_HEAD(&group->mark_entries);
group->ops = ops;
- mutex_lock(&fsnotify_grp_mutex);
-
- fsnotify_add_group(group);
-
- mutex_unlock(&fsnotify_grp_mutex);
-
return group;
}
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 7d2962e5328ee..a3230c4855318 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -322,6 +322,13 @@ int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
if (unlikely(!inode))
return -EINVAL;
+ /*
+ * if this group isn't being testing for inode type events we need
+ * to start testing
+ */
+ if (unlikely(list_empty(&group->inode_group_list)))
+ fsnotify_add_inode_group(group);
+
/*
* LOCKING ORDER!!!!
* entry->lock
--
GitLab
From 7131485a93679ff9a543b74df280cfd119eb03ca Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:23 -0500
Subject: [PATCH 079/863] fsnotify: mount point listeners list and global mask
currently all of the notification systems implemented select which inodes
they care about and receive messages only about those inodes (or the
children of those inodes.) This patch begins to flesh out fsnotify support
for the concept of listeners that want to hear notification for an inode
accessed below a given monut point. This patch implements a second list
of fsnotify groups to hold these types of groups and a second global mask
to hold the events of interest for this type of group.
The reason we want a second group list and mask is because the inode based
notification should_send_event support which makes each group look for a mark
on the given inode. With one nfsmount listener that means that every group would
have to take the inode->i_lock, look for their mark, not find one, and return
for every operation. By seperating vfsmount from inode listeners only when
there is a inode listener will the inode groups have to look for their
mark and take the inode lock. vfsmount listeners will have to grab the lock and
look for a mark but there should be fewer of them, and one vfsmount listener
won't cause the i_lock to be grabbed and released for every fsnotify group
on every io operation.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 92 ++++++++++++++++++++++++--------
fs/notify/fsnotify.h | 6 +++
fs/notify/group.c | 33 ++++++++++--
fs/notify/inode_mark.c | 7 +++
include/linux/fsnotify_backend.h | 5 ++
5 files changed, 117 insertions(+), 26 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 23b5cfbeed50f..a61aaa7108256 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -21,6 +21,7 @@
#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/mount.h>
#include <linux/srcu.h>
#include <linux/fsnotify_backend.h>
@@ -134,6 +135,45 @@ void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
}
EXPORT_SYMBOL_GPL(__fsnotify_parent);
+static void send_to_group(__u32 mask,
+ struct fsnotify_group *group,
+ void *data, int data_is, const char *file_name,
+ u32 cookie, struct fsnotify_event **event,
+ struct inode *to_tell)
+{
+ if (!group->ops->should_send_event(group, to_tell, mask,
+ data, data_is))
+ return;
+ if (!*event) {
+ *event = fsnotify_create_event(to_tell, mask, data,
+ data_is, file_name,
+ cookie, GFP_KERNEL);
+ /*
+ * shit, we OOM'd and now we can't tell, maybe
+ * someday someone else will want to do something
+ * here
+ */
+ if (!*event)
+ return;
+ }
+ group->ops->handle_event(group, *event);
+}
+
+static bool needed_by_vfsmount(__u32 test_mask, void *data, int data_is)
+{
+ struct path *path;
+
+ if (data_is == FSNOTIFY_EVENT_PATH)
+ path = (struct path *)data;
+ else if (data_is == FSNOTIFY_EVENT_FILE)
+ path = &((struct file *)data)->f_path;
+ else
+ return false;
+
+ /* hook in this when mnt->mnt_fsnotify_mask is defined */
+ /* return (test_mask & path->mnt->mnt_fsnotify_mask); */
+ return false;
+}
/*
* This is the main call to fsnotify. The VFS calls into hook specific functions
* in linux/fsnotify.h. Those functions then in turn call here. Here will call
@@ -148,38 +188,46 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
/* global tests shouldn't care about events on child only the specific event */
__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
- if (list_empty(&fsnotify_inode_groups))
- return;
+ /* if no fsnotify listeners, nothing to do */
+ if (list_empty(&fsnotify_inode_groups) &&
+ list_empty(&fsnotify_vfsmount_groups))
+ return;
+
+ /* if none of the directed listeners or vfsmount listeners care */
+ if (!(test_mask & fsnotify_inode_mask) &&
+ !(test_mask & fsnotify_vfsmount_mask))
+ return;
+
+ /* if this inode's directed listeners don't care and nothing on the vfsmount
+ * listeners list cares, nothing to do */
+ if (!(test_mask & to_tell->i_fsnotify_mask) &&
+ !needed_by_vfsmount(test_mask, data, data_is))
+ return;
- if (!(test_mask & fsnotify_inode_mask))
- return;
-
- if (!(test_mask & to_tell->i_fsnotify_mask))
- return;
/*
* SRCU!! the groups list is very very much read only and the path is
* very hot. The VAST majority of events are not going to need to do
* anything other than walk the list so it's crazy to pre-allocate.
*/
idx = srcu_read_lock(&fsnotify_grp_srcu);
- list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list) {
- if (test_mask & group->mask) {
- if (!group->ops->should_send_event(group, to_tell, mask,
- data, data_is))
- continue;
- if (!event) {
- event = fsnotify_create_event(to_tell, mask, data,
- data_is, file_name, cookie,
- GFP_KERNEL);
- /* shit, we OOM'd and now we can't tell, maybe
- * someday someone else will want to do something
- * here */
- if (!event)
- break;
+
+ if (test_mask & to_tell->i_fsnotify_mask) {
+ list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list) {
+ if (test_mask & group->mask) {
+ send_to_group(mask, group, data, data_is,
+ file_name, cookie, &event, to_tell);
}
- group->ops->handle_event(group, event);
}
}
+ if (needed_by_vfsmount(test_mask, data, data_is)) {
+ list_for_each_entry_rcu(group, &fsnotify_vfsmount_groups, vfsmount_group_list) {
+ if (test_mask & group->mask) {
+ send_to_group(mask, group, data, data_is,
+ file_name, cookie, &event, to_tell);
+ }
+ }
+ }
+
srcu_read_unlock(&fsnotify_grp_srcu, idx);
/*
* fsnotify_create_event() took a reference so the event can't be cleaned
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index 5bd22412017f1..2ba59158969fd 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -10,14 +10,20 @@
extern struct srcu_struct fsnotify_grp_srcu;
/* all groups which receive inode fsnotify events */
extern struct list_head fsnotify_inode_groups;
+/* all groups which receive vfsmount fsnotify events */
+extern struct list_head fsnotify_vfsmount_groups;
/* all bitwise OR of all event types (FS_*) for all fsnotify_inode_groups */
extern __u32 fsnotify_inode_mask;
+/* all bitwise OR of all event types (FS_*) for all fsnotify_vfsmount_groups */
+extern __u32 fsnotify_vfsmount_mask;
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
/* add a group to the inode group list */
extern void fsnotify_add_inode_group(struct fsnotify_group *group);
+/* add a group to the vfsmount group list */
+extern void fsnotify_add_vfsmount_group(struct fsnotify_group *group);
/* final kfree of a group */
extern void fsnotify_final_destroy_group(struct fsnotify_group *group);
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 34fccbd2809ce..aa4654fe6ec2f 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -32,10 +32,14 @@
static DEFINE_MUTEX(fsnotify_grp_mutex);
/* protects reads while running the fsnotify_groups list */
struct srcu_struct fsnotify_grp_srcu;
-/* all groups registered to receive filesystem notifications */
+/* all groups registered to receive inode filesystem notifications */
LIST_HEAD(fsnotify_inode_groups);
+/* all groups registered to receive mount point filesystem notifications */
+LIST_HEAD(fsnotify_vfsmount_groups);
/* bitwise OR of all events (FS_*) interesting to some group on this system */
__u32 fsnotify_inode_mask;
+/* bitwise OR of all events (FS_*) interesting to some group on this system */
+__u32 fsnotify_vfsmount_mask;
/*
* When a new group registers or changes it's set of interesting events
@@ -44,14 +48,20 @@ __u32 fsnotify_inode_mask;
void fsnotify_recalc_global_mask(void)
{
struct fsnotify_group *group;
- __u32 mask = 0;
+ __u32 inode_mask = 0;
+ __u32 vfsmount_mask = 0;
int idx;
idx = srcu_read_lock(&fsnotify_grp_srcu);
list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list)
- mask |= group->mask;
+ inode_mask |= group->mask;
+ list_for_each_entry_rcu(group, &fsnotify_vfsmount_groups, vfsmount_group_list)
+ vfsmount_mask |= group->mask;
+
srcu_read_unlock(&fsnotify_grp_srcu, idx);
- fsnotify_inode_mask = mask;
+
+ fsnotify_inode_mask = inode_mask;
+ fsnotify_vfsmount_mask = vfsmount_mask;
}
/*
@@ -77,6 +87,17 @@ void fsnotify_recalc_group_mask(struct fsnotify_group *group)
fsnotify_recalc_global_mask();
}
+void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
+{
+ mutex_lock(&fsnotify_grp_mutex);
+
+ if (!group->on_vfsmount_group_list)
+ list_add_tail_rcu(&group->vfsmount_group_list, &fsnotify_vfsmount_groups);
+ group->on_vfsmount_group_list = 1;
+
+ mutex_unlock(&fsnotify_grp_mutex);
+}
+
void fsnotify_add_inode_group(struct fsnotify_group *group)
{
mutex_lock(&fsnotify_grp_mutex);
@@ -132,6 +153,9 @@ static void __fsnotify_evict_group(struct fsnotify_group *group)
if (group->on_inode_group_list)
list_del_rcu(&group->inode_group_list);
group->on_inode_group_list = 0;
+ if (group->on_vfsmount_group_list)
+ list_del_rcu(&group->vfsmount_group_list);
+ group->on_vfsmount_group_list = 0;
}
/*
@@ -197,6 +221,7 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
group->max_events = UINT_MAX;
INIT_LIST_HEAD(&group->inode_group_list);
+ INIT_LIST_HEAD(&group->vfsmount_group_list);
spin_lock_init(&group->mark_lock);
INIT_LIST_HEAD(&group->mark_entries);
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index a3230c4855318..beffebb64627f 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -328,6 +328,13 @@ int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
*/
if (unlikely(list_empty(&group->inode_group_list)))
fsnotify_add_inode_group(group);
+ /*
+ * XXX This is where we could also do the fsnotify_add_vfsmount_group
+ * if we are setting and vfsmount mark....
+
+ if (unlikely(list_empty(&group->vfsmount_group_list)))
+ fsnotify_add_vfsmount_group(group);
+ */
/*
* LOCKING ORDER!!!!
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 21079ade5620d..dea48bee057d1 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -99,6 +99,10 @@ struct fsnotify_group {
* or fsnotify_grp_srcu depending on write vs read.
*/
struct list_head inode_group_list;
+ /*
+ * same as above except anchored by fsnotify_vfsmount_groups
+ */
+ struct list_head vfsmount_group_list;
/*
* Defines all of the event types in which this group is interested.
@@ -137,6 +141,7 @@ struct fsnotify_group {
/* prevents double list_del of group_list. protected by global fsnotify_grp_mutex */
bool on_inode_group_list;
+ bool on_vfsmount_group_list;
/* groups can define private fields here or use the void *private */
union {
--
GitLab
From 3a9fb89f4cd04c23e16397befba92efb5d989b74 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:23 -0500
Subject: [PATCH 080/863] fsnotify: include vfsmount in should_send_event when
appropriate
To ensure that a group will not duplicate events when it receives it based
on the vfsmount and the inode should_send_event test we should distinguish
those two cases. We pass a vfsmount to this function so groups can make
their own determinations.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 4 +--
fs/notify/fsnotify.c | 39 ++++++++++++++--------------
fs/notify/inotify/inotify_fsnotify.c | 3 ++-
include/linux/fsnotify_backend.h | 3 ++-
kernel/audit_tree.c | 3 ++-
kernel/audit_watch.c | 3 ++-
6 files changed, 29 insertions(+), 26 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index e0a847bd53bea..9eddafa4c7ba8 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -133,8 +133,8 @@ static int dnotify_handle_event(struct fsnotify_group *group,
* userspace notification for that pair.
*/
static bool dnotify_should_send_event(struct fsnotify_group *group,
- struct inode *inode, __u32 mask,
- void *data, int data_type)
+ struct inode *inode, struct vfsmount *mnt,
+ __u32 mask, void *data, int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index a61aaa7108256..78c440c343a8a 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -135,13 +135,12 @@ void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
}
EXPORT_SYMBOL_GPL(__fsnotify_parent);
-static void send_to_group(__u32 mask,
- struct fsnotify_group *group,
- void *data, int data_is, const char *file_name,
- u32 cookie, struct fsnotify_event **event,
- struct inode *to_tell)
+static void send_to_group(struct fsnotify_group *group, struct inode *to_tell,
+ struct vfsmount *mnt, __u32 mask, void *data,
+ int data_is, u32 cookie, const char *file_name,
+ struct fsnotify_event **event)
{
- if (!group->ops->should_send_event(group, to_tell, mask,
+ if (!group->ops->should_send_event(group, to_tell, mnt, mask,
data, data_is))
return;
if (!*event) {
@@ -159,15 +158,9 @@ static void send_to_group(__u32 mask,
group->ops->handle_event(group, *event);
}
-static bool needed_by_vfsmount(__u32 test_mask, void *data, int data_is)
+static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
{
- struct path *path;
-
- if (data_is == FSNOTIFY_EVENT_PATH)
- path = (struct path *)data;
- else if (data_is == FSNOTIFY_EVENT_FILE)
- path = &((struct file *)data)->f_path;
- else
+ if (!mnt)
return false;
/* hook in this when mnt->mnt_fsnotify_mask is defined */
@@ -184,6 +177,7 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
{
struct fsnotify_group *group;
struct fsnotify_event *event = NULL;
+ struct vfsmount *mnt = NULL;
int idx;
/* global tests shouldn't care about events on child only the specific event */
__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
@@ -198,10 +192,15 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
!(test_mask & fsnotify_vfsmount_mask))
return;
+ if (data_is == FSNOTIFY_EVENT_PATH)
+ mnt = ((struct path *)data)->mnt;
+ else if (data_is == FSNOTIFY_EVENT_FILE)
+ mnt = ((struct file *)data)->f_path.mnt;
+
/* if this inode's directed listeners don't care and nothing on the vfsmount
* listeners list cares, nothing to do */
if (!(test_mask & to_tell->i_fsnotify_mask) &&
- !needed_by_vfsmount(test_mask, data, data_is))
+ !needed_by_vfsmount(test_mask, mnt))
return;
/*
@@ -214,16 +213,16 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
if (test_mask & to_tell->i_fsnotify_mask) {
list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list) {
if (test_mask & group->mask) {
- send_to_group(mask, group, data, data_is,
- file_name, cookie, &event, to_tell);
+ send_to_group(group, to_tell, NULL, mask, data, data_is,
+ cookie, file_name, &event);
}
}
}
- if (needed_by_vfsmount(test_mask, data, data_is)) {
+ if (needed_by_vfsmount(test_mask, mnt)) {
list_for_each_entry_rcu(group, &fsnotify_vfsmount_groups, vfsmount_group_list) {
if (test_mask & group->mask) {
- send_to_group(mask, group, data, data_is,
- file_name, cookie, &event, to_tell);
+ send_to_group(group, to_tell, mnt, mask, data, data_is,
+ cookie, file_name, &event);
}
}
}
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 0a0f5d0f0d0af..8075ae708ed46 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -141,7 +141,8 @@ static void inotify_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnot
}
static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
- __u32 mask, void *data, int data_type)
+ struct vfsmount *mnt, __u32 mask, void *data,
+ int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index dea48bee057d1..c2a04b7e4fcad 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -79,7 +79,8 @@ struct fsnotify_event_private_data;
*/
struct fsnotify_ops {
bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
- __u32 mask, void *data, int data_type);
+ struct vfsmount *mnt, __u32 mask, void *data,
+ int data_type);
int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
void (*free_group_priv)(struct fsnotify_group *group);
void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 04f16887406bb..ecf0bf260d093 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -920,7 +920,8 @@ static void audit_tree_freeing_mark(struct fsnotify_mark_entry *entry, struct fs
}
static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode,
- __u32 mask, void *data, int data_type)
+ struct vfsmount *mnt, __u32 mask, void *data,
+ int data_type)
{
return 0;
}
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 83d5f9674ceca..6304ee5d76427 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -514,7 +514,8 @@ void audit_remove_watch_rule(struct audit_krule *krule)
}
static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
- __u32 mask, void *data, int data_type)
+ struct vfsmount *mnt, __u32 mask, void *data,
+ int data_type)
{
struct fsnotify_mark_entry *entry;
bool send;
--
GitLab
From 2823e04de4f1a49087b58ff2bb8f61361ffd9321 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:23 -0500
Subject: [PATCH 081/863] fsnotify: put inode specific fields in an
fsnotify_mark in a union
The addition of marks on vfs mounts will be simplified if the inode
specific parts of a mark and the vfsmnt specific parts of a mark are
actually in a union so naming can be easy. This patch just implements the
inode struct and the union.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 4 ++--
fs/notify/inode_mark.c | 28 ++++++++++++++--------------
fs/notify/inotify/inotify_fsnotify.c | 2 +-
fs/notify/inotify/inotify_user.c | 10 +++++-----
include/linux/fsnotify_backend.h | 17 +++++++++++++----
kernel/audit_tree.c | 16 ++++++++--------
6 files changed, 43 insertions(+), 34 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 9eddafa4c7ba8..fc3a9dc567c52 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -70,8 +70,8 @@ static void dnotify_recalc_inode_mask(struct fsnotify_mark_entry *entry)
if (old_mask == new_mask)
return;
- if (entry->inode)
- fsnotify_recalc_inode_mask(entry->inode);
+ if (entry->i.inode)
+ fsnotify_recalc_inode_mask(entry->i.inode);
}
/*
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index beffebb64627f..6731408c49f7b 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -117,7 +117,7 @@ static void fsnotify_recalc_inode_mask_locked(struct inode *inode)
assert_spin_locked(&inode->i_lock);
- hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i_list)
+ hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i.i_list)
new_mask |= entry->mask;
inode->i_fsnotify_mask = new_mask;
}
@@ -148,7 +148,7 @@ void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry)
spin_lock(&entry->lock);
group = entry->group;
- inode = entry->inode;
+ inode = entry->i.inode;
BUG_ON(group && !inode);
BUG_ON(!group && inode);
@@ -165,8 +165,8 @@ void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry)
spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
- hlist_del_init(&entry->i_list);
- entry->inode = NULL;
+ hlist_del_init(&entry->i.i_list);
+ entry->i.inode = NULL;
list_del_init(&entry->g_list);
entry->group = NULL;
@@ -248,14 +248,14 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
LIST_HEAD(free_list);
spin_lock(&inode->i_lock);
- hlist_for_each_entry_safe(entry, pos, n, &inode->i_fsnotify_mark_entries, i_list) {
- list_add(&entry->free_i_list, &free_list);
- hlist_del_init(&entry->i_list);
+ hlist_for_each_entry_safe(entry, pos, n, &inode->i_fsnotify_mark_entries, i.i_list) {
+ list_add(&entry->i.free_i_list, &free_list);
+ hlist_del_init(&entry->i.i_list);
fsnotify_get_mark(entry);
}
spin_unlock(&inode->i_lock);
- list_for_each_entry_safe(entry, lentry, &free_list, free_i_list) {
+ list_for_each_entry_safe(entry, lentry, &free_list, i.free_i_list) {
fsnotify_destroy_mark_by_entry(entry);
fsnotify_put_mark(entry);
}
@@ -273,7 +273,7 @@ struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *grou
assert_spin_locked(&inode->i_lock);
- hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i_list) {
+ hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i.i_list) {
if (entry->group == group) {
fsnotify_get_mark(entry);
return entry;
@@ -285,7 +285,7 @@ struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *grou
void fsnotify_duplicate_mark(struct fsnotify_mark_entry *new, struct fsnotify_mark_entry *old)
{
assert_spin_locked(&old->lock);
- new->inode = old->inode;
+ new->i.inode = old->i.inode;
new->group = old->group;
new->mask = old->mask;
new->free_mark = old->free_mark;
@@ -299,10 +299,10 @@ void fsnotify_init_mark(struct fsnotify_mark_entry *entry,
{
spin_lock_init(&entry->lock);
atomic_set(&entry->refcnt, 1);
- INIT_HLIST_NODE(&entry->i_list);
+ INIT_HLIST_NODE(&entry->i.i_list);
entry->group = NULL;
entry->mask = 0;
- entry->inode = NULL;
+ entry->i.inode = NULL;
entry->free_mark = free_mark;
}
@@ -350,9 +350,9 @@ int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
lentry = fsnotify_find_mark_entry(group, inode);
if (!lentry) {
entry->group = group;
- entry->inode = inode;
+ entry->i.inode = inode;
- hlist_add_head(&entry->i_list, &inode->i_fsnotify_mark_entries);
+ hlist_add_head(&entry->i.i_list, &inode->i_fsnotify_mark_entries);
list_add(&entry->g_list, &group->mark_entries);
fsnotify_get_mark(entry); /* for i_list and g_list */
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 8075ae708ed46..3edb51cfcfbe9 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -193,7 +193,7 @@ static int idr_callback(int id, void *p, void *data)
*/
if (entry)
printk(KERN_WARNING "entry->group=%p inode=%p wd=%d\n",
- entry->group, entry->inode, ientry->wd);
+ entry->group, entry->i.inode, ientry->wd);
return 0;
}
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index a48d68a68b257..4b1587f9df3b3 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -445,7 +445,7 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
if (wd == -1) {
WARN_ONCE(1, "%s: ientry=%p ientry->wd=%d ientry->group=%p"
" ientry->inode=%p\n", __func__, ientry, ientry->wd,
- ientry->fsn_entry.group, ientry->fsn_entry.inode);
+ ientry->fsn_entry.group, ientry->fsn_entry.i.inode);
goto out;
}
@@ -454,7 +454,7 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
if (unlikely(!found_ientry)) {
WARN_ONCE(1, "%s: ientry=%p ientry->wd=%d ientry->group=%p"
" ientry->inode=%p\n", __func__, ientry, ientry->wd,
- ientry->fsn_entry.group, ientry->fsn_entry.inode);
+ ientry->fsn_entry.group, ientry->fsn_entry.i.inode);
goto out;
}
@@ -468,9 +468,9 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
"entry->inode=%p found_ientry=%p found_ientry->wd=%d "
"found_ientry->group=%p found_ientry->inode=%p\n",
__func__, ientry, ientry->wd, ientry->fsn_entry.group,
- ientry->fsn_entry.inode, found_ientry, found_ientry->wd,
+ ientry->fsn_entry.i.inode, found_ientry, found_ientry->wd,
found_ientry->fsn_entry.group,
- found_ientry->fsn_entry.inode);
+ found_ientry->fsn_entry.i.inode);
goto out;
}
@@ -482,7 +482,7 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
if (unlikely(atomic_read(&ientry->fsn_entry.refcnt) < 3)) {
printk(KERN_ERR "%s: ientry=%p ientry->wd=%d ientry->group=%p"
" ientry->inode=%p\n", __func__, ientry, ientry->wd,
- ientry->fsn_entry.group, ientry->fsn_entry.inode);
+ ientry->fsn_entry.group, ientry->fsn_entry.i.inode);
/* we can't really recover with bad ref cnting.. */
BUG();
}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index c2a04b7e4fcad..dca7f2cbde907 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -226,6 +226,15 @@ struct fsnotify_event {
struct list_head private_data_list; /* groups can store private data here */
};
+/*
+ * Inode specific fields in an fsnotify_mark_entry
+ */
+struct fsnotify_inode_mark {
+ struct inode *inode; /* inode this entry is associated with */
+ struct hlist_node i_list; /* list of mark_entries by inode->i_fsnotify_mark_entries */
+ struct list_head free_i_list; /* tmp list used when freeing this mark */
+};
+
/*
* a mark is simply an entry attached to an in core inode which allows an
* fsnotify listener to indicate they are either no longer interested in events
@@ -241,12 +250,12 @@ struct fsnotify_mark_entry {
/* we hold ref for each i_list and g_list. also one ref for each 'thing'
* in kernel that found and may be using this mark. */
atomic_t refcnt; /* active things looking at this mark */
- struct inode *inode; /* inode this entry is associated with */
struct fsnotify_group *group; /* group this mark entry is for */
- struct hlist_node i_list; /* list of mark_entries by inode->i_fsnotify_mark_entries */
struct list_head g_list; /* list of mark_entries by group->i_fsnotify_mark_entries */
- spinlock_t lock; /* protect group, inode, and killme */
- struct list_head free_i_list; /* tmp list used when freeing this mark */
+ spinlock_t lock; /* protect group and inode */
+ union {
+ struct fsnotify_inode_mark i;
+ };
struct list_head free_g_list; /* tmp list used when freeing this mark */
void (*free_mark)(struct fsnotify_mark_entry *entry); /* called on final put+free */
};
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index ecf0bf260d093..c21b05d252241 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -179,9 +179,9 @@ static void insert_hash(struct audit_chunk *chunk)
struct fsnotify_mark_entry *entry = &chunk->mark;
struct list_head *list;
- if (!entry->inode)
+ if (!entry->i.inode)
return;
- list = chunk_hash(entry->inode);
+ list = chunk_hash(entry->i.inode);
list_add_rcu(&chunk->hash, list);
}
@@ -193,7 +193,7 @@ struct audit_chunk *audit_tree_lookup(const struct inode *inode)
list_for_each_entry_rcu(p, list, hash) {
/* mark.inode may have gone NULL, but who cares? */
- if (p->mark.inode == inode) {
+ if (p->mark.i.inode == inode) {
atomic_long_inc(&p->refs);
return p;
}
@@ -233,7 +233,7 @@ static void untag_chunk(struct node *p)
spin_unlock(&hash_lock);
spin_lock(&entry->lock);
- if (chunk->dead || !entry->inode) {
+ if (chunk->dead || !entry->i.inode) {
spin_unlock(&entry->lock);
goto out;
}
@@ -259,7 +259,7 @@ static void untag_chunk(struct node *p)
if (!new)
goto Fallback;
fsnotify_duplicate_mark(&new->mark, entry);
- if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.inode, 1)) {
+ if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, 1)) {
free_chunk(new);
goto Fallback;
}
@@ -388,7 +388,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
chunk_entry = &chunk->mark;
spin_lock(&old_entry->lock);
- if (!old_entry->inode) {
+ if (!old_entry->i.inode) {
/* old_entry is being shot, lets just lie */
spin_unlock(&old_entry->lock);
fsnotify_put_mark(old_entry);
@@ -397,7 +397,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
}
fsnotify_duplicate_mark(chunk_entry, old_entry);
- if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->inode, 1)) {
+ if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->i.inode, 1)) {
spin_unlock(&old_entry->lock);
free_chunk(chunk);
fsnotify_put_mark(old_entry);
@@ -605,7 +605,7 @@ void audit_trim_trees(void)
list_for_each_entry(node, &tree->chunks, list) {
struct audit_chunk *chunk = find_chunk(node);
/* this could be NULL if the watch is dieing else where... */
- struct inode *inode = chunk->mark.inode;
+ struct inode *inode = chunk->mark.i.inode;
node->index |= 1U<<31;
if (iterate_mounts(compare_root, inode, root_mnt))
node->index &= ~(1U<<31);
--
GitLab
From 4136510dd61a1ca151fc5b9d8c1ebd5a8ce2e8f4 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:23 -0500
Subject: [PATCH 082/863] fsnotify: add vfsmount specific fields to the
fsnotify_mark_entry union
vfsmount marks need mostly the same data as inode specific fields, but for
consistency and understandability we put that data in a vfsmount specific
struct inside a union with inode specific data.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
include/linux/fsnotify_backend.h | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index dca7f2cbde907..0c0fd4ee28407 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -235,6 +235,15 @@ struct fsnotify_inode_mark {
struct list_head free_i_list; /* tmp list used when freeing this mark */
};
+/*
+ * Mount point specific fields in an fsnotify_mark_entry
+ */
+struct fsnotify_vfsmount_mark {
+ struct vfsmount *mnt; /* inode this entry is associated with */
+ struct hlist_node m_list; /* list of mark_entries by inode->i_fsnotify_mark_entries */
+ struct list_head free_m_list; /* tmp list used when freeing this mark */
+};
+
/*
* a mark is simply an entry attached to an in core inode which allows an
* fsnotify listener to indicate they are either no longer interested in events
@@ -255,6 +264,7 @@ struct fsnotify_mark_entry {
spinlock_t lock; /* protect group and inode */
union {
struct fsnotify_inode_mark i;
+ struct fsnotify_vfsmount_mark m;
};
struct list_head free_g_list; /* tmp list used when freeing this mark */
void (*free_mark)(struct fsnotify_mark_entry *entry); /* called on final put+free */
--
GitLab
From 098cf2fc77ee190c92bf9d08d69a13305f2487ec Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:24 -0500
Subject: [PATCH 083/863] fsnotify: add flags to fsnotify_mark_entries
To differentiate between inode and vfsmount (or other future) types of
marks we add a flags field and set the inode bit on inode marks (the only
currently supported type of mark)
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inode_mark.c | 2 ++
include/linux/fsnotify_backend.h | 3 +++
2 files changed, 5 insertions(+)
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 6731408c49f7b..b00065842b3e5 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -322,6 +322,8 @@ int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
if (unlikely(!inode))
return -EINVAL;
+ entry->flags = FSNOTIFY_MARK_FLAG_INODE;
+
/*
* if this group isn't being testing for inode type events we need
* to start testing
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 0c0fd4ee28407..cf165857199bf 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -267,6 +267,9 @@ struct fsnotify_mark_entry {
struct fsnotify_vfsmount_mark m;
};
struct list_head free_g_list; /* tmp list used when freeing this mark */
+#define FSNOTIFY_MARK_FLAG_INODE 0x01
+#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
+ unsigned int flags; /* vfsmount or inode mark? */
void (*free_mark)(struct fsnotify_mark_entry *entry); /* called on final put+free */
};
--
GitLab
From 72acc854427948efed7a83da27f7dc3239ac9afc Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:24 -0500
Subject: [PATCH 084/863] fsnotify: kill FSNOTIFY_EVENT_FILE
Some fsnotify operations send a struct file. This is more information than
we technically need. We instead send a struct path in all cases instead of
sometimes a path and sometimes a file.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 12 +++++------
fs/notify/notification.c | 9 --------
include/linux/fsnotify.h | 36 +++++++++++++++++---------------
include/linux/fsnotify_backend.h | 5 ++---
4 files changed, 26 insertions(+), 36 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 78c440c343a8a..60e84fd338dd3 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -79,15 +79,15 @@ void __fsnotify_update_child_dentry_flags(struct inode *inode)
}
/* Notify this dentry's parent about a child's events. */
-void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
+void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
{
struct dentry *parent;
struct inode *p_inode;
bool send = false;
bool should_update_children = false;
- if (file)
- dentry = file->f_path.dentry;
+ if (!dentry)
+ dentry = path->dentry;
if (!(dentry->d_flags & DCACHE_FSNOTIFY_PARENT_WATCHED))
return;
@@ -119,8 +119,8 @@ void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
* specifies these are events which came from a child. */
mask |= FS_EVENT_ON_CHILD;
- if (file)
- fsnotify(p_inode, mask, file, FSNOTIFY_EVENT_FILE,
+ if (path)
+ fsnotify(p_inode, mask, path, FSNOTIFY_EVENT_PATH,
dentry->d_name.name, 0);
else
fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
@@ -194,8 +194,6 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
if (data_is == FSNOTIFY_EVENT_PATH)
mnt = ((struct path *)data)->mnt;
- else if (data_is == FSNOTIFY_EVENT_FILE)
- mnt = ((struct file *)data)->f_path.mnt;
/* if this inode's directed listeners don't care and nothing on the vfsmount
* listeners list cares, nothing to do */
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index dafd0b7687b8b..066f1f988bacc 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -390,15 +390,6 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
event->data_type = data_type;
switch (data_type) {
- case FSNOTIFY_EVENT_FILE: {
- struct file *file = data;
- struct path *path = &file->f_path;
- event->path.dentry = path->dentry;
- event->path.mnt = path->mnt;
- path_get(&event->path);
- event->data_type = FSNOTIFY_EVENT_PATH;
- break;
- }
case FSNOTIFY_EVENT_PATH: {
struct path *path = data;
event->path.dentry = path->dentry;
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 04ea03ea80905..06d296d85ebfc 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -26,14 +26,12 @@ static inline void fsnotify_d_instantiate(struct dentry *entry,
}
/* Notify this dentry's parent about a child's events. */
-static inline void fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
+static inline void fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
{
- BUG_ON(file && dentry);
+ if (!dentry)
+ dentry = path->dentry;
- if (file)
- dentry = file->f_path.dentry;
-
- __fsnotify_parent(file, dentry, mask);
+ __fsnotify_parent(path, dentry, mask);
}
/*
@@ -160,14 +158,15 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
*/
static inline void fsnotify_access(struct file *file)
{
- struct inode *inode = file->f_path.dentry->d_inode;
+ struct path *path = &file->f_path;
+ struct inode *inode = path->dentry->d_inode;
__u32 mask = FS_ACCESS;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(file, NULL, mask);
- fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
/*
@@ -175,14 +174,15 @@ static inline void fsnotify_access(struct file *file)
*/
static inline void fsnotify_modify(struct file *file)
{
- struct inode *inode = file->f_path.dentry->d_inode;
+ struct path *path = &file->f_path;
+ struct inode *inode = path->dentry->d_inode;
__u32 mask = FS_MODIFY;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(file, NULL, mask);
- fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
/*
@@ -190,14 +190,15 @@ static inline void fsnotify_modify(struct file *file)
*/
static inline void fsnotify_open(struct file *file)
{
- struct inode *inode = file->f_path.dentry->d_inode;
+ struct path *path = &file->f_path;
+ struct inode *inode = path->dentry->d_inode;
__u32 mask = FS_OPEN;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(file, NULL, mask);
- fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
/*
@@ -205,6 +206,7 @@ static inline void fsnotify_open(struct file *file)
*/
static inline void fsnotify_close(struct file *file)
{
+ struct path *path = &file->f_path;
struct inode *inode = file->f_path.dentry->d_inode;
fmode_t mode = file->f_mode;
__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
@@ -212,8 +214,8 @@ static inline void fsnotify_close(struct file *file)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(file, NULL, mask);
- fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
/*
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index cf165857199bf..7a6ba755acc3a 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -214,7 +214,6 @@ struct fsnotify_event {
#define FSNOTIFY_EVENT_NONE 0
#define FSNOTIFY_EVENT_PATH 1
#define FSNOTIFY_EVENT_INODE 2
-#define FSNOTIFY_EVENT_FILE 3
int data_type; /* which of the above union we have */
atomic_t refcnt; /* how many groups still are using/need to send this event */
__u32 mask; /* the type of access, bitwise OR for FS_* event types */
@@ -280,7 +279,7 @@ struct fsnotify_mark_entry {
/* main fsnotify call to send events */
extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
const char *name, u32 cookie);
-extern void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask);
+extern void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask);
extern void __fsnotify_inode_delete(struct inode *inode);
extern u32 fsnotify_get_cookie(void);
@@ -393,7 +392,7 @@ static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int d
const char *name, u32 cookie)
{}
-static inline void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
+static inline void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
{}
static inline void __fsnotify_inode_delete(struct inode *inode)
--
GitLab
From e61ce86737b4d60521e4e71f9892fe4bdcfb688b Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:24 -0500
Subject: [PATCH 085/863] fsnotify: rename fsnotify_mark_entry to just
fsnotify_mark
The name is long and it serves no real purpose. So rename
fsnotify_mark_entry to just fsnotify_mark.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/inode.c | 2 +-
fs/notify/dnotify/dnotify.c | 24 +++++++-------
fs/notify/group.c | 8 ++---
fs/notify/inode_mark.c | 48 ++++++++++++++--------------
fs/notify/inotify/inotify.h | 6 ++--
fs/notify/inotify/inotify_fsnotify.c | 8 ++---
fs/notify/inotify/inotify_user.c | 8 ++---
include/linux/fs.h | 2 +-
include/linux/fsnotify.h | 18 +++++------
include/linux/fsnotify_backend.h | 38 +++++++++++-----------
kernel/audit_tree.c | 14 ++++----
kernel/audit_watch.c | 8 ++---
kernel/auditsc.c | 4 +--
13 files changed, 94 insertions(+), 94 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index 8e1bee998796d..a2da778467bbe 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -264,7 +264,7 @@ void inode_init_once(struct inode *inode)
INIT_LIST_HEAD(&inode->i_data.i_mmap_nonlinear);
i_size_ordered_init(inode);
#ifdef CONFIG_FSNOTIFY
- INIT_HLIST_HEAD(&inode->i_fsnotify_mark_entries);
+ INIT_HLIST_HEAD(&inode->i_fsnotify_marks);
#endif
}
EXPORT_SYMBOL(inode_init_once);
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index fc3a9dc567c52..e6edae60894d1 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -34,12 +34,12 @@ static struct fsnotify_group *dnotify_group __read_mostly;
static DEFINE_MUTEX(dnotify_mark_mutex);
/*
- * dnotify will attach one of these to each inode (i_fsnotify_mark_entries) which
+ * dnotify will attach one of these to each inode (i_fsnotify_marks) which
* is being watched by dnotify. If multiple userspace applications are watching
* the same directory with dnotify their information is chained in dn
*/
struct dnotify_mark_entry {
- struct fsnotify_mark_entry fsn_entry;
+ struct fsnotify_mark fsn_entry;
struct dnotify_struct *dn;
};
@@ -51,7 +51,7 @@ struct dnotify_mark_entry {
* it calls the fsnotify function so it can update the set of all events relevant
* to this inode.
*/
-static void dnotify_recalc_inode_mask(struct fsnotify_mark_entry *entry)
+static void dnotify_recalc_inode_mask(struct fsnotify_mark *entry)
{
__u32 new_mask, old_mask;
struct dnotify_struct *dn;
@@ -85,7 +85,7 @@ static void dnotify_recalc_inode_mask(struct fsnotify_mark_entry *entry)
static int dnotify_handle_event(struct fsnotify_group *group,
struct fsnotify_event *event)
{
- struct fsnotify_mark_entry *entry = NULL;
+ struct fsnotify_mark *entry = NULL;
struct dnotify_mark_entry *dnentry;
struct inode *to_tell;
struct dnotify_struct *dn;
@@ -136,7 +136,7 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
struct inode *inode, struct vfsmount *mnt,
__u32 mask, void *data, int data_type)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
bool send;
/* !dir_notify_enable should never get here, don't waste time checking
@@ -163,7 +163,7 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
return send;
}
-static void dnotify_free_mark(struct fsnotify_mark_entry *entry)
+static void dnotify_free_mark(struct fsnotify_mark *entry)
{
struct dnotify_mark_entry *dnentry = container_of(entry,
struct dnotify_mark_entry,
@@ -184,14 +184,14 @@ static struct fsnotify_ops dnotify_fsnotify_ops = {
/*
* Called every time a file is closed. Looks first for a dnotify mark on the
- * inode. If one is found run all of the ->dn entries attached to that
+ * inode. If one is found run all of the ->dn structures attached to that
* mark for one relevant to this process closing the file and remove that
* dnotify_struct. If that was the last dnotify_struct also remove the
- * fsnotify_mark_entry.
+ * fsnotify_mark.
*/
void dnotify_flush(struct file *filp, fl_owner_t id)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
struct dnotify_mark_entry *dnentry;
struct dnotify_struct *dn;
struct dnotify_struct **prev;
@@ -260,7 +260,7 @@ static __u32 convert_arg(unsigned long arg)
/*
* If multiple processes watch the same inode with dnotify there is only one
- * dnotify mark in inode->i_fsnotify_mark_entries but we chain a dnotify_struct
+ * dnotify mark in inode->i_fsnotify_marks but we chain a dnotify_struct
* onto that mark. This function either attaches the new dnotify_struct onto
* that list, or it |= the mask onto an existing dnofiy_struct.
*/
@@ -298,7 +298,7 @@ static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark_entry *dnent
int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
{
struct dnotify_mark_entry *new_dnentry, *dnentry;
- struct fsnotify_mark_entry *new_entry, *entry;
+ struct fsnotify_mark *new_entry, *entry;
struct dnotify_struct *dn;
struct inode *inode;
fl_owner_t id = current->files;
@@ -378,7 +378,7 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
/* if (f != filp) means that we lost a race and another task/thread
* actually closed the fd we are still playing with before we grabbed
* the dnotify_mark_mutex and entry->lock. Since closing the fd is the
- * only time we clean up the mark entries we need to get our mark off
+ * only time we clean up the marks we need to get our mark off
* the list. */
if (f != filp) {
/* if we added ourselves, shoot ourselves, it's possible that
diff --git a/fs/notify/group.c b/fs/notify/group.c
index aa4654fe6ec2f..b70e7d21dfde6 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -74,10 +74,10 @@ void fsnotify_recalc_group_mask(struct fsnotify_group *group)
{
__u32 mask = 0;
__u32 old_mask = group->mask;
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
spin_lock(&group->mark_lock);
- list_for_each_entry(entry, &group->mark_entries, g_list)
+ list_for_each_entry(entry, &group->marks_list, g_list)
mask |= entry->mask;
spin_unlock(&group->mark_lock);
@@ -133,7 +133,7 @@ void fsnotify_final_destroy_group(struct fsnotify_group *group)
*/
static void fsnotify_destroy_group(struct fsnotify_group *group)
{
- /* clear all inode mark entries for this group */
+ /* clear all inode marks for this group */
fsnotify_clear_marks_by_group(group);
/* past the point of no return, matches the initial value of 1 */
@@ -224,7 +224,7 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
INIT_LIST_HEAD(&group->vfsmount_group_list);
spin_lock_init(&group->mark_lock);
- INIT_LIST_HEAD(&group->mark_entries);
+ INIT_LIST_HEAD(&group->marks_list);
group->ops = ops;
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index b00065842b3e5..7e69f6b08d4e3 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -38,12 +38,12 @@
* that lock to dereference either of these things (they could be NULL even with
* the lock)
*
- * group->mark_lock protects the mark_entries list anchored inside a given group
+ * group->mark_lock protects the marks_list anchored inside a given group
* and each entry is hooked via the g_list. It also sorta protects the
* free_g_list, which when used is anchored by a private list on the stack of the
* task which held the group->mark_lock.
*
- * inode->i_lock protects the i_fsnotify_mark_entries list anchored inside a
+ * inode->i_lock protects the i_fsnotify_marks list anchored inside a
* given inode and each entry is hooked via the i_list. (and sorta the
* free_i_list)
*
@@ -61,7 +61,7 @@
* need to be cleaned up. (fsnotify_clear_marks_by_group)
*
* Worst case we are given an inode and need to clean up all the marks on that
- * inode. We take i_lock and walk the i_fsnotify_mark_entries safely. For each
+ * inode. We take i_lock and walk the i_fsnotify_marks safely. For each
* mark on the list we take a reference (so the mark can't disappear under us).
* We remove that mark form the inode's list of marks and we add this mark to a
* private list anchored on the stack using i_free_list; At this point we no
@@ -95,12 +95,12 @@
#include <linux/fsnotify_backend.h>
#include "fsnotify.h"
-void fsnotify_get_mark(struct fsnotify_mark_entry *entry)
+void fsnotify_get_mark(struct fsnotify_mark *entry)
{
atomic_inc(&entry->refcnt);
}
-void fsnotify_put_mark(struct fsnotify_mark_entry *entry)
+void fsnotify_put_mark(struct fsnotify_mark *entry)
{
if (atomic_dec_and_test(&entry->refcnt))
entry->free_mark(entry);
@@ -111,13 +111,13 @@ void fsnotify_put_mark(struct fsnotify_mark_entry *entry)
*/
static void fsnotify_recalc_inode_mask_locked(struct inode *inode)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
struct hlist_node *pos;
__u32 new_mask = 0;
assert_spin_locked(&inode->i_lock);
- hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i.i_list)
+ hlist_for_each_entry(entry, pos, &inode->i_fsnotify_marks, i.i_list)
new_mask |= entry->mask;
inode->i_fsnotify_mask = new_mask;
}
@@ -140,7 +140,7 @@ void fsnotify_recalc_inode_mask(struct inode *inode)
* The caller had better be holding a reference to this mark so we don't actually
* do the final put under the entry->lock
*/
-void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry)
+void fsnotify_destroy_mark_by_entry(struct fsnotify_mark *entry)
{
struct fsnotify_group *group;
struct inode *inode;
@@ -174,7 +174,7 @@ void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry)
fsnotify_put_mark(entry); /* for i_list and g_list */
/*
- * this mark is now off the inode->i_fsnotify_mark_entries list and we
+ * this mark is now off the inode->i_fsnotify_marks list and we
* hold the inode->i_lock, so this is the perfect time to update the
* inode->i_fsnotify_mask
*/
@@ -221,11 +221,11 @@ void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry)
*/
void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
{
- struct fsnotify_mark_entry *lentry, *entry;
+ struct fsnotify_mark *lentry, *entry;
LIST_HEAD(free_list);
spin_lock(&group->mark_lock);
- list_for_each_entry_safe(entry, lentry, &group->mark_entries, g_list) {
+ list_for_each_entry_safe(entry, lentry, &group->marks_list, g_list) {
list_add(&entry->free_g_list, &free_list);
list_del_init(&entry->g_list);
fsnotify_get_mark(entry);
@@ -243,12 +243,12 @@ void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
*/
void fsnotify_clear_marks_by_inode(struct inode *inode)
{
- struct fsnotify_mark_entry *entry, *lentry;
+ struct fsnotify_mark *entry, *lentry;
struct hlist_node *pos, *n;
LIST_HEAD(free_list);
spin_lock(&inode->i_lock);
- hlist_for_each_entry_safe(entry, pos, n, &inode->i_fsnotify_mark_entries, i.i_list) {
+ hlist_for_each_entry_safe(entry, pos, n, &inode->i_fsnotify_marks, i.i_list) {
list_add(&entry->i.free_i_list, &free_list);
hlist_del_init(&entry->i.i_list);
fsnotify_get_mark(entry);
@@ -265,15 +265,15 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
* given a group and inode, find the mark associated with that combination.
* if found take a reference to that mark and return it, else return NULL
*/
-struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group,
- struct inode *inode)
+struct fsnotify_mark *fsnotify_find_mark_entry(struct fsnotify_group *group,
+ struct inode *inode)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
struct hlist_node *pos;
assert_spin_locked(&inode->i_lock);
- hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i.i_list) {
+ hlist_for_each_entry(entry, pos, &inode->i_fsnotify_marks, i.i_list) {
if (entry->group == group) {
fsnotify_get_mark(entry);
return entry;
@@ -282,7 +282,7 @@ struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *grou
return NULL;
}
-void fsnotify_duplicate_mark(struct fsnotify_mark_entry *new, struct fsnotify_mark_entry *old)
+void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old)
{
assert_spin_locked(&old->lock);
new->i.inode = old->i.inode;
@@ -294,8 +294,8 @@ void fsnotify_duplicate_mark(struct fsnotify_mark_entry *new, struct fsnotify_ma
/*
* Nothing fancy, just initialize lists and locks and counters.
*/
-void fsnotify_init_mark(struct fsnotify_mark_entry *entry,
- void (*free_mark)(struct fsnotify_mark_entry *entry))
+void fsnotify_init_mark(struct fsnotify_mark *entry,
+ void (*free_mark)(struct fsnotify_mark *entry))
{
spin_lock_init(&entry->lock);
atomic_set(&entry->refcnt, 1);
@@ -311,11 +311,11 @@ void fsnotify_init_mark(struct fsnotify_mark_entry *entry,
* These marks may be used for the fsnotify backend to determine which
* event types should be delivered to which group and for which inodes.
*/
-int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
+int fsnotify_add_mark(struct fsnotify_mark *entry,
struct fsnotify_group *group, struct inode *inode,
int allow_dups)
{
- struct fsnotify_mark_entry *lentry = NULL;
+ struct fsnotify_mark *lentry = NULL;
int ret = 0;
inode = igrab(inode);
@@ -354,8 +354,8 @@ int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
entry->group = group;
entry->i.inode = inode;
- hlist_add_head(&entry->i.i_list, &inode->i_fsnotify_mark_entries);
- list_add(&entry->g_list, &group->mark_entries);
+ hlist_add_head(&entry->i.i_list, &inode->i_fsnotify_marks);
+ list_add(&entry->g_list, &group->marks_list);
fsnotify_get_mark(entry); /* for i_list and g_list */
diff --git a/fs/notify/inotify/inotify.h b/fs/notify/inotify/inotify.h
index f234f3a4c8ca0..07be6df2428f1 100644
--- a/fs/notify/inotify/inotify.h
+++ b/fs/notify/inotify/inotify.h
@@ -10,12 +10,12 @@ struct inotify_event_private_data {
};
struct inotify_inode_mark_entry {
- /* fsnotify_mark_entry MUST be the first thing */
- struct fsnotify_mark_entry fsn_entry;
+ /* fsnotify_mark MUST be the first thing */
+ struct fsnotify_mark fsn_entry;
int wd;
};
-extern void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
+extern void inotify_ignored_and_remove_idr(struct fsnotify_mark *entry,
struct fsnotify_group *group);
extern void inotify_free_event_priv(struct fsnotify_event_private_data *event_priv);
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 3edb51cfcfbe9..f33a9bd32e5dc 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -88,7 +88,7 @@ static int inotify_merge(struct list_head *list, struct fsnotify_event *event)
static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
struct inotify_inode_mark_entry *ientry;
struct inode *to_tell;
struct inotify_event_private_data *event_priv;
@@ -135,7 +135,7 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
return ret;
}
-static void inotify_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+static void inotify_freeing_mark(struct fsnotify_mark *entry, struct fsnotify_group *group)
{
inotify_ignored_and_remove_idr(entry, group);
}
@@ -144,7 +144,7 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
struct vfsmount *mnt, __u32 mask, void *data,
int data_type)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
bool send;
spin_lock(&inode->i_lock);
@@ -171,7 +171,7 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
*/
static int idr_callback(int id, void *p, void *data)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
struct inotify_inode_mark_entry *ientry;
static bool warned = false;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 4b1587f9df3b3..7be5dcf07ac79 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -386,7 +386,7 @@ static struct inotify_inode_mark_entry *inotify_idr_find_locked(struct fsnotify_
ientry = idr_find(idr, wd);
if (ientry) {
- struct fsnotify_mark_entry *fsn_entry = &ientry->fsn_entry;
+ struct fsnotify_mark *fsn_entry = &ientry->fsn_entry;
fsnotify_get_mark(fsn_entry);
/* One ref for being in the idr, one ref we just took */
@@ -499,7 +499,7 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
/*
* Send IN_IGNORED for this wd, remove this wd from the idr.
*/
-void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
+void inotify_ignored_and_remove_idr(struct fsnotify_mark *entry,
struct fsnotify_group *group)
{
struct inotify_inode_mark_entry *ientry;
@@ -541,7 +541,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
}
/* ding dong the mark is dead */
-static void inotify_free_mark(struct fsnotify_mark_entry *entry)
+static void inotify_free_mark(struct fsnotify_mark *entry)
{
struct inotify_inode_mark_entry *ientry;
@@ -554,7 +554,7 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
struct inode *inode,
u32 arg)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
struct inotify_inode_mark_entry *ientry;
__u32 old_mask, new_mask;
__u32 mask;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e5598d2f99b98..85fe89c43487c 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -768,7 +768,7 @@ struct inode {
#ifdef CONFIG_FSNOTIFY
__u32 i_fsnotify_mask; /* all events this inode cares about */
- struct hlist_head i_fsnotify_mark_entries; /* fsnotify mark entries */
+ struct hlist_head i_fsnotify_marks;
#endif
unsigned long i_state;
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 06d296d85ebfc..62e93a9dd1150 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -19,10 +19,10 @@
* fsnotify_d_instantiate - instantiate a dentry for inode
* Called with dcache_lock held.
*/
-static inline void fsnotify_d_instantiate(struct dentry *entry,
- struct inode *inode)
+static inline void fsnotify_d_instantiate(struct dentry *dentry,
+ struct inode *inode)
{
- __fsnotify_d_instantiate(entry, inode);
+ __fsnotify_d_instantiate(dentry, inode);
}
/* Notify this dentry's parent about a child's events. */
@@ -35,16 +35,16 @@ static inline void fsnotify_parent(struct path *path, struct dentry *dentry, __u
}
/*
- * fsnotify_d_move - entry has been moved
- * Called with dcache_lock and entry->d_lock held.
+ * fsnotify_d_move - dentry has been moved
+ * Called with dcache_lock and dentry->d_lock held.
*/
-static inline void fsnotify_d_move(struct dentry *entry)
+static inline void fsnotify_d_move(struct dentry *dentry)
{
/*
- * On move we need to update entry->d_flags to indicate if the new parent
- * cares about events from this entry.
+ * On move we need to update dentry->d_flags to indicate if the new parent
+ * cares about events from this dentry.
*/
- __fsnotify_update_dcache_flags(entry);
+ __fsnotify_update_dcache_flags(dentry);
}
/*
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 7a6ba755acc3a..59c072e8fddd0 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -62,7 +62,7 @@
struct fsnotify_group;
struct fsnotify_event;
-struct fsnotify_mark_entry;
+struct fsnotify_mark;
struct fsnotify_event_private_data;
/*
@@ -83,7 +83,7 @@ struct fsnotify_ops {
int data_type);
int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
void (*free_group_priv)(struct fsnotify_group *group);
- void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
+ void (*freeing_mark)(struct fsnotify_mark *entry, struct fsnotify_group *group);
void (*free_event_priv)(struct fsnotify_event_private_data *priv);
};
@@ -133,12 +133,12 @@ struct fsnotify_group {
unsigned int q_len; /* events on the queue */
unsigned int max_events; /* maximum events allowed on the list */
- /* stores all fastapth entries assoc with this group so they can be cleaned on unregister */
- spinlock_t mark_lock; /* protect mark_entries list */
+ /* stores all fastpath marks assoc with this group so they can be cleaned on unregister */
+ spinlock_t mark_lock; /* protect marks_list */
atomic_t num_marks; /* 1 for each mark entry and 1 for not being
* past the point of no return when freeing
* a group */
- struct list_head mark_entries; /* all inode mark entries for this group */
+ struct list_head marks_list; /* all inode marks for this group */
/* prevents double list_del of group_list. protected by global fsnotify_grp_mutex */
bool on_inode_group_list;
@@ -226,20 +226,20 @@ struct fsnotify_event {
};
/*
- * Inode specific fields in an fsnotify_mark_entry
+ * Inode specific fields in an fsnotify_mark
*/
struct fsnotify_inode_mark {
struct inode *inode; /* inode this entry is associated with */
- struct hlist_node i_list; /* list of mark_entries by inode->i_fsnotify_mark_entries */
+ struct hlist_node i_list; /* list of marks by inode->i_fsnotify_marks */
struct list_head free_i_list; /* tmp list used when freeing this mark */
};
/*
- * Mount point specific fields in an fsnotify_mark_entry
+ * Mount point specific fields in an fsnotify_mark
*/
struct fsnotify_vfsmount_mark {
struct vfsmount *mnt; /* inode this entry is associated with */
- struct hlist_node m_list; /* list of mark_entries by inode->i_fsnotify_mark_entries */
+ struct hlist_node m_list; /* list of marks by inode->i_fsnotify_marks */
struct list_head free_m_list; /* tmp list used when freeing this mark */
};
@@ -253,13 +253,13 @@ struct fsnotify_vfsmount_mark {
* (such as dnotify) will flush these when the open fd is closed and not at
* inode eviction or modification.
*/
-struct fsnotify_mark_entry {
+struct fsnotify_mark {
__u32 mask; /* mask this mark entry is for */
/* we hold ref for each i_list and g_list. also one ref for each 'thing'
* in kernel that found and may be using this mark. */
atomic_t refcnt; /* active things looking at this mark */
struct fsnotify_group *group; /* group this mark entry is for */
- struct list_head g_list; /* list of mark_entries by group->i_fsnotify_mark_entries */
+ struct list_head g_list; /* list of marks by group->i_fsnotify_marks */
spinlock_t lock; /* protect group and inode */
union {
struct fsnotify_inode_mark i;
@@ -269,7 +269,7 @@ struct fsnotify_mark_entry {
#define FSNOTIFY_MARK_FLAG_INODE 0x01
#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
unsigned int flags; /* vfsmount or inode mark? */
- void (*free_mark)(struct fsnotify_mark_entry *entry); /* called on final put+free */
+ void (*free_mark)(struct fsnotify_mark *entry); /* called on final put+free */
};
#ifdef CONFIG_FSNOTIFY
@@ -361,19 +361,19 @@ extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group
/* run all marks associated with an inode and update inode->i_fsnotify_mask */
extern void fsnotify_recalc_inode_mask(struct inode *inode);
-extern void fsnotify_init_mark(struct fsnotify_mark_entry *entry, void (*free_mark)(struct fsnotify_mark_entry *entry));
+extern void fsnotify_init_mark(struct fsnotify_mark *entry, void (*free_mark)(struct fsnotify_mark *entry));
/* find (and take a reference) to a mark associated with group and inode */
-extern struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group, struct inode *inode);
+extern struct fsnotify_mark *fsnotify_find_mark_entry(struct fsnotify_group *group, struct inode *inode);
/* copy the values from old into new */
-extern void fsnotify_duplicate_mark(struct fsnotify_mark_entry *new, struct fsnotify_mark_entry *old);
+extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
/* attach the mark to both the group and the inode */
-extern int fsnotify_add_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group, struct inode *inode, int allow_dups);
+extern int fsnotify_add_mark(struct fsnotify_mark *entry, struct fsnotify_group *group, struct inode *inode, int allow_dups);
/* given a mark, flag it to be freed when all references are dropped */
-extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry);
+extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark *entry);
/* run all the marks in a group, and flag them to be freed */
extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
-extern void fsnotify_get_mark(struct fsnotify_mark_entry *entry);
-extern void fsnotify_put_mark(struct fsnotify_mark_entry *entry);
+extern void fsnotify_get_mark(struct fsnotify_mark *entry);
+extern void fsnotify_put_mark(struct fsnotify_mark *entry);
extern void fsnotify_unmount_inodes(struct list_head *list);
/* put here because inotify does some weird stuff when destroying watches */
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index c21b05d252241..f16f909fbbc11 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -22,7 +22,7 @@ struct audit_tree {
struct audit_chunk {
struct list_head hash;
- struct fsnotify_mark_entry mark;
+ struct fsnotify_mark mark;
struct list_head trees; /* with root here */
int dead;
int count;
@@ -134,7 +134,7 @@ static void __put_chunk(struct rcu_head *rcu)
audit_put_chunk(chunk);
}
-static void audit_tree_destroy_watch(struct fsnotify_mark_entry *entry)
+static void audit_tree_destroy_watch(struct fsnotify_mark *entry)
{
struct audit_chunk *chunk = container_of(entry, struct audit_chunk, mark);
call_rcu(&chunk->head, __put_chunk);
@@ -176,7 +176,7 @@ static inline struct list_head *chunk_hash(const struct inode *inode)
/* hash_lock & entry->lock is held by caller */
static void insert_hash(struct audit_chunk *chunk)
{
- struct fsnotify_mark_entry *entry = &chunk->mark;
+ struct fsnotify_mark *entry = &chunk->mark;
struct list_head *list;
if (!entry->i.inode)
@@ -222,7 +222,7 @@ static struct audit_chunk *find_chunk(struct node *p)
static void untag_chunk(struct node *p)
{
struct audit_chunk *chunk = find_chunk(p);
- struct fsnotify_mark_entry *entry = &chunk->mark;
+ struct fsnotify_mark *entry = &chunk->mark;
struct audit_chunk *new;
struct audit_tree *owner;
int size = chunk->count - 1;
@@ -316,7 +316,7 @@ static void untag_chunk(struct node *p)
static int create_chunk(struct inode *inode, struct audit_tree *tree)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
struct audit_chunk *chunk = alloc_chunk(1);
if (!chunk)
return -ENOMEM;
@@ -354,7 +354,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree)
/* the first tagged inode becomes root of tree */
static int tag_chunk(struct inode *inode, struct audit_tree *tree)
{
- struct fsnotify_mark_entry *old_entry, *chunk_entry;
+ struct fsnotify_mark *old_entry, *chunk_entry;
struct audit_tree *owner;
struct audit_chunk *chunk, *old;
struct node *p;
@@ -911,7 +911,7 @@ static int audit_tree_handle_event(struct fsnotify_group *group, struct fsnotify
return -EOPNOTSUPP;
}
-static void audit_tree_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+static void audit_tree_freeing_mark(struct fsnotify_mark *entry, struct fsnotify_group *group)
{
struct audit_chunk *chunk = container_of(entry, struct audit_chunk, mark);
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 6304ee5d76427..d8cb55a5c0599 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -56,7 +56,7 @@ struct audit_watch {
struct audit_parent {
struct list_head watches; /* anchor for audit_watch->wlist */
- struct fsnotify_mark_entry mark; /* fsnotify mark on the inode */
+ struct fsnotify_mark mark; /* fsnotify mark on the inode */
};
/* fsnotify handle. */
@@ -72,7 +72,7 @@ static void audit_free_parent(struct audit_parent *parent)
kfree(parent);
}
-static void audit_watch_free_mark(struct fsnotify_mark_entry *entry)
+static void audit_watch_free_mark(struct fsnotify_mark *entry)
{
struct audit_parent *parent;
@@ -99,7 +99,7 @@ static void audit_put_parent(struct audit_parent *parent)
static inline struct audit_parent *audit_find_parent(struct inode *inode)
{
struct audit_parent *parent = NULL;
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
spin_lock(&inode->i_lock);
entry = fsnotify_find_mark_entry(audit_watch_group, inode);
@@ -517,7 +517,7 @@ static bool audit_watch_should_send_event(struct fsnotify_group *group, struct i
struct vfsmount *mnt, __u32 mask, void *data,
int data_type)
{
- struct fsnotify_mark_entry *entry;
+ struct fsnotify_mark *entry;
bool send;
spin_lock(&inode->i_lock);
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 853185f7ba7e0..b87a63beb66c4 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1724,7 +1724,7 @@ static inline void handle_one(const struct inode *inode)
struct audit_tree_refs *p;
struct audit_chunk *chunk;
int count;
- if (likely(hlist_empty(&inode->i_fsnotify_mark_entries)))
+ if (likely(hlist_empty(&inode->i_fsnotify_marks)))
return;
context = current->audit_context;
p = context->trees;
@@ -1767,7 +1767,7 @@ static void handle_path(const struct dentry *dentry)
seq = read_seqbegin(&rename_lock);
for(;;) {
struct inode *inode = d->d_inode;
- if (inode && unlikely(!hlist_empty(&inode->i_fsnotify_mark_entries))) {
+ if (inode && unlikely(!hlist_empty(&inode->i_fsnotify_marks))) {
struct audit_chunk *chunk;
chunk = audit_tree_lookup(inode);
if (chunk) {
--
GitLab
From d07754412f9cdc2f4a99318d5ee81ace6715ea99 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:24 -0500
Subject: [PATCH 086/863] fsnotify: rename fsnotify_find_mark_entry to
fsnotify_find_mark
the _entry portion of fsnotify functions is useless. Drop it.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 14 +++++++-------
fs/notify/inode_mark.c | 14 +++++++-------
fs/notify/inotify/inotify_fsnotify.c | 4 ++--
fs/notify/inotify/inotify_user.c | 6 +++---
include/linux/fsnotify_backend.h | 4 ++--
kernel/audit_tree.c | 12 ++++++------
kernel/audit_watch.c | 8 ++++----
7 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index e6edae60894d1..b202bc590c61a 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -96,7 +96,7 @@ static int dnotify_handle_event(struct fsnotify_group *group,
to_tell = event->to_tell;
spin_lock(&to_tell->i_lock);
- entry = fsnotify_find_mark_entry(group, to_tell);
+ entry = fsnotify_find_mark(group, to_tell);
spin_unlock(&to_tell->i_lock);
/* unlikely since we alreay passed dnotify_should_send_event() */
@@ -148,7 +148,7 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
return false;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(group, inode);
+ entry = fsnotify_find_mark(group, inode);
spin_unlock(&inode->i_lock);
/* no mark means no dnotify watch */
@@ -158,7 +158,7 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
mask = (mask & ~FS_EVENT_ON_CHILD);
send = (mask & entry->mask);
- fsnotify_put_mark(entry); /* matches fsnotify_find_mark_entry */
+ fsnotify_put_mark(entry); /* matches fsnotify_find_mark */
return send;
}
@@ -202,7 +202,7 @@ void dnotify_flush(struct file *filp, fl_owner_t id)
return;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(dnotify_group, inode);
+ entry = fsnotify_find_mark(dnotify_group, inode);
spin_unlock(&inode->i_lock);
if (!entry)
return;
@@ -226,7 +226,7 @@ void dnotify_flush(struct file *filp, fl_owner_t id)
/* nothing else could have found us thanks to the dnotify_mark_mutex */
if (dnentry->dn == NULL)
- fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_destroy_mark(entry);
fsnotify_recalc_group_mask(dnotify_group);
@@ -357,7 +357,7 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
/* add the new_entry or find an old one. */
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(dnotify_group, inode);
+ entry = fsnotify_find_mark(dnotify_group, inode);
spin_unlock(&inode->i_lock);
if (entry) {
dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
@@ -414,7 +414,7 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
spin_unlock(&entry->lock);
if (destroy)
- fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_destroy_mark(entry);
fsnotify_recalc_group_mask(dnotify_group);
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 7e69f6b08d4e3..01c42632eb2a3 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -56,7 +56,7 @@
* - The inode is unlinked for the last time. (fsnotify_inode_remove)
* - The inode is being evicted from cache. (fsnotify_inode_delete)
* - The fs the inode is on is unmounted. (fsnotify_inode_delete/fsnotify_unmount_inodes)
- * - Something explicitly requests that it be removed. (fsnotify_destroy_mark_by_entry)
+ * - Something explicitly requests that it be removed. (fsnotify_destroy_mark)
* - The fsnotify_group associated with the mark is going away and all such marks
* need to be cleaned up. (fsnotify_clear_marks_by_group)
*
@@ -140,7 +140,7 @@ void fsnotify_recalc_inode_mask(struct inode *inode)
* The caller had better be holding a reference to this mark so we don't actually
* do the final put under the entry->lock
*/
-void fsnotify_destroy_mark_by_entry(struct fsnotify_mark *entry)
+void fsnotify_destroy_mark(struct fsnotify_mark *entry)
{
struct fsnotify_group *group;
struct inode *inode;
@@ -233,7 +233,7 @@ void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
spin_unlock(&group->mark_lock);
list_for_each_entry_safe(entry, lentry, &free_list, free_g_list) {
- fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_destroy_mark(entry);
fsnotify_put_mark(entry);
}
}
@@ -256,7 +256,7 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
spin_unlock(&inode->i_lock);
list_for_each_entry_safe(entry, lentry, &free_list, i.free_i_list) {
- fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_destroy_mark(entry);
fsnotify_put_mark(entry);
}
}
@@ -265,8 +265,8 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
* given a group and inode, find the mark associated with that combination.
* if found take a reference to that mark and return it, else return NULL
*/
-struct fsnotify_mark *fsnotify_find_mark_entry(struct fsnotify_group *group,
- struct inode *inode)
+struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group,
+ struct inode *inode)
{
struct fsnotify_mark *entry;
struct hlist_node *pos;
@@ -349,7 +349,7 @@ int fsnotify_add_mark(struct fsnotify_mark *entry,
spin_lock(&inode->i_lock);
if (!allow_dups)
- lentry = fsnotify_find_mark_entry(group, inode);
+ lentry = fsnotify_find_mark(group, inode);
if (!lentry) {
entry->group = group;
entry->i.inode = inode;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index f33a9bd32e5dc..f8a2a6eda1338 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -98,7 +98,7 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
to_tell = event->to_tell;
spin_lock(&to_tell->i_lock);
- entry = fsnotify_find_mark_entry(group, to_tell);
+ entry = fsnotify_find_mark(group, to_tell);
spin_unlock(&to_tell->i_lock);
/* race with watch removal? We already passes should_send */
if (unlikely(!entry))
@@ -148,7 +148,7 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
bool send;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(group, inode);
+ entry = fsnotify_find_mark(group, inode);
spin_unlock(&inode->i_lock);
if (!entry)
return false;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 7be5dcf07ac79..118085c9d2d9e 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -567,7 +567,7 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
return -EINVAL;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(group, inode);
+ entry = fsnotify_find_mark(group, inode);
spin_unlock(&inode->i_lock);
if (!entry)
return -ENOENT;
@@ -607,7 +607,7 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
/* return the wd */
ret = ientry->wd;
- /* match the get from fsnotify_find_mark_entry() */
+ /* match the get from fsnotify_find_mark() */
fsnotify_put_mark(entry);
return ret;
@@ -823,7 +823,7 @@ SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
ret = 0;
- fsnotify_destroy_mark_by_entry(&ientry->fsn_entry);
+ fsnotify_destroy_mark(&ientry->fsn_entry);
/* match ref taken by inotify_idr_find */
fsnotify_put_mark(&ientry->fsn_entry);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 59c072e8fddd0..83b6bfeb2d669 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -363,13 +363,13 @@ extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group
extern void fsnotify_recalc_inode_mask(struct inode *inode);
extern void fsnotify_init_mark(struct fsnotify_mark *entry, void (*free_mark)(struct fsnotify_mark *entry));
/* find (and take a reference) to a mark associated with group and inode */
-extern struct fsnotify_mark *fsnotify_find_mark_entry(struct fsnotify_group *group, struct inode *inode);
+extern struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group, struct inode *inode);
/* copy the values from old into new */
extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
/* attach the mark to both the group and the inode */
extern int fsnotify_add_mark(struct fsnotify_mark *entry, struct fsnotify_group *group, struct inode *inode, int allow_dups);
/* given a mark, flag it to be freed when all references are dropped */
-extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark *entry);
+extern void fsnotify_destroy_mark(struct fsnotify_mark *entry);
/* run all the marks in a group, and flag them to be freed */
extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
extern void fsnotify_get_mark(struct fsnotify_mark *entry);
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index f16f909fbbc11..b20fb055d7121 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -250,7 +250,7 @@ static void untag_chunk(struct node *p)
list_del_rcu(&chunk->hash);
spin_unlock(&hash_lock);
spin_unlock(&entry->lock);
- fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_destroy_mark(entry);
fsnotify_put_mark(entry);
goto out;
}
@@ -293,7 +293,7 @@ static void untag_chunk(struct node *p)
owner->root = new;
spin_unlock(&hash_lock);
spin_unlock(&entry->lock);
- fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_destroy_mark(entry);
fsnotify_put_mark(entry);
goto out;
@@ -333,7 +333,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree)
spin_unlock(&hash_lock);
chunk->dead = 1;
spin_unlock(&entry->lock);
- fsnotify_destroy_mark_by_entry(entry);
+ fsnotify_destroy_mark(entry);
fsnotify_put_mark(entry);
return 0;
}
@@ -361,7 +361,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
int n;
spin_lock(&inode->i_lock);
- old_entry = fsnotify_find_mark_entry(audit_tree_group, inode);
+ old_entry = fsnotify_find_mark(audit_tree_group, inode);
spin_unlock(&inode->i_lock);
if (!old_entry)
return create_chunk(inode, tree);
@@ -415,7 +415,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
spin_unlock(&chunk_entry->lock);
spin_unlock(&old_entry->lock);
- fsnotify_destroy_mark_by_entry(chunk_entry);
+ fsnotify_destroy_mark(chunk_entry);
fsnotify_put_mark(chunk_entry);
fsnotify_put_mark(old_entry);
@@ -446,7 +446,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
spin_unlock(&hash_lock);
spin_unlock(&chunk_entry->lock);
spin_unlock(&old_entry->lock);
- fsnotify_destroy_mark_by_entry(old_entry);
+ fsnotify_destroy_mark(old_entry);
fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */
fsnotify_put_mark(old_entry); /* and kill it */
return 0;
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index d8cb55a5c0599..24ecbebf43541 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -102,7 +102,7 @@ static inline struct audit_parent *audit_find_parent(struct inode *inode)
struct fsnotify_mark *entry;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(audit_watch_group, inode);
+ entry = fsnotify_find_mark(audit_watch_group, inode);
spin_unlock(&inode->i_lock);
if (entry)
@@ -354,7 +354,7 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
}
mutex_unlock(&audit_filter_mutex);
- fsnotify_destroy_mark_by_entry(&parent->mark);
+ fsnotify_destroy_mark(&parent->mark);
fsnotify_recalc_group_mask(audit_watch_group);
@@ -504,7 +504,7 @@ void audit_remove_watch_rule(struct audit_krule *krule)
if (list_empty(&parent->watches)) {
audit_get_parent(parent);
- fsnotify_destroy_mark_by_entry(&parent->mark);
+ fsnotify_destroy_mark(&parent->mark);
audit_put_parent(parent);
}
}
@@ -521,7 +521,7 @@ static bool audit_watch_should_send_event(struct fsnotify_group *group, struct i
bool send;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark_entry(group, inode);
+ entry = fsnotify_find_mark(group, inode);
spin_unlock(&inode->i_lock);
if (!entry)
return false;
--
GitLab
From 841bdc10f573aa010dd5818d35a5690b7d9f73ce Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:24 -0500
Subject: [PATCH 087/863] fsnotify: rename mark_entry to just mark
previously I used mark_entry when talking about marks on inodes. The
_entry is pretty useless. Just use "mark" instead.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/group.c | 6 +-
fs/notify/inode_mark.c | 148 +++++++++++++++----------------
include/linux/fsnotify_backend.h | 26 +++---
3 files changed, 90 insertions(+), 90 deletions(-)
diff --git a/fs/notify/group.c b/fs/notify/group.c
index b70e7d21dfde6..9e9eb406afdd4 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -74,11 +74,11 @@ void fsnotify_recalc_group_mask(struct fsnotify_group *group)
{
__u32 mask = 0;
__u32 old_mask = group->mask;
- struct fsnotify_mark *entry;
+ struct fsnotify_mark *mark;
spin_lock(&group->mark_lock);
- list_for_each_entry(entry, &group->marks_list, g_list)
- mask |= entry->mask;
+ list_for_each_entry(mark, &group->marks_list, g_list)
+ mask |= mark->mask;
spin_unlock(&group->mark_lock);
group->mask = mask;
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 01c42632eb2a3..27c1b43ad739e 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -30,21 +30,21 @@
* There are 3 spinlocks involved with fsnotify inode marks and they MUST
* be taken in order as follows:
*
- * entry->lock
+ * mark->lock
* group->mark_lock
* inode->i_lock
*
- * entry->lock protects 2 things, entry->group and entry->inode. You must hold
+ * mark->lock protects 2 things, mark->group and mark->inode. You must hold
* that lock to dereference either of these things (they could be NULL even with
* the lock)
*
* group->mark_lock protects the marks_list anchored inside a given group
- * and each entry is hooked via the g_list. It also sorta protects the
+ * and each mark is hooked via the g_list. It also sorta protects the
* free_g_list, which when used is anchored by a private list on the stack of the
* task which held the group->mark_lock.
*
* inode->i_lock protects the i_fsnotify_marks list anchored inside a
- * given inode and each entry is hooked via the i_list. (and sorta the
+ * given inode and each mark is hooked via the i_list. (and sorta the
* free_i_list)
*
*
@@ -95,15 +95,15 @@
#include <linux/fsnotify_backend.h>
#include "fsnotify.h"
-void fsnotify_get_mark(struct fsnotify_mark *entry)
+void fsnotify_get_mark(struct fsnotify_mark *mark)
{
- atomic_inc(&entry->refcnt);
+ atomic_inc(&mark->refcnt);
}
-void fsnotify_put_mark(struct fsnotify_mark *entry)
+void fsnotify_put_mark(struct fsnotify_mark *mark)
{
- if (atomic_dec_and_test(&entry->refcnt))
- entry->free_mark(entry);
+ if (atomic_dec_and_test(&mark->refcnt))
+ mark->free_mark(mark);
}
/*
@@ -111,14 +111,14 @@ void fsnotify_put_mark(struct fsnotify_mark *entry)
*/
static void fsnotify_recalc_inode_mask_locked(struct inode *inode)
{
- struct fsnotify_mark *entry;
+ struct fsnotify_mark *mark;
struct hlist_node *pos;
__u32 new_mask = 0;
assert_spin_locked(&inode->i_lock);
- hlist_for_each_entry(entry, pos, &inode->i_fsnotify_marks, i.i_list)
- new_mask |= entry->mask;
+ hlist_for_each_entry(mark, pos, &inode->i_fsnotify_marks, i.i_list)
+ new_mask |= mark->mask;
inode->i_fsnotify_mask = new_mask;
}
@@ -138,40 +138,40 @@ void fsnotify_recalc_inode_mask(struct inode *inode)
/*
* Any time a mark is getting freed we end up here.
* The caller had better be holding a reference to this mark so we don't actually
- * do the final put under the entry->lock
+ * do the final put under the mark->lock
*/
-void fsnotify_destroy_mark(struct fsnotify_mark *entry)
+void fsnotify_destroy_mark(struct fsnotify_mark *mark)
{
struct fsnotify_group *group;
struct inode *inode;
- spin_lock(&entry->lock);
+ spin_lock(&mark->lock);
- group = entry->group;
- inode = entry->i.inode;
+ group = mark->group;
+ inode = mark->i.inode;
BUG_ON(group && !inode);
BUG_ON(!group && inode);
/* if !group something else already marked this to die */
if (!group) {
- spin_unlock(&entry->lock);
+ spin_unlock(&mark->lock);
return;
}
/* 1 from caller and 1 for being on i_list/g_list */
- BUG_ON(atomic_read(&entry->refcnt) < 2);
+ BUG_ON(atomic_read(&mark->refcnt) < 2);
spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
- hlist_del_init(&entry->i.i_list);
- entry->i.inode = NULL;
+ hlist_del_init(&mark->i.i_list);
+ mark->i.inode = NULL;
- list_del_init(&entry->g_list);
- entry->group = NULL;
+ list_del_init(&mark->g_list);
+ mark->group = NULL;
- fsnotify_put_mark(entry); /* for i_list and g_list */
+ fsnotify_put_mark(mark); /* for i_list and g_list */
/*
* this mark is now off the inode->i_fsnotify_marks list and we
@@ -182,21 +182,21 @@ void fsnotify_destroy_mark(struct fsnotify_mark *entry)
spin_unlock(&inode->i_lock);
spin_unlock(&group->mark_lock);
- spin_unlock(&entry->lock);
+ spin_unlock(&mark->lock);
/*
* Some groups like to know that marks are being freed. This is a
- * callback to the group function to let it know that this entry
+ * callback to the group function to let it know that this mark
* is being freed.
*/
if (group->ops->freeing_mark)
- group->ops->freeing_mark(entry, group);
+ group->ops->freeing_mark(mark, group);
/*
* __fsnotify_update_child_dentry_flags(inode);
*
* I really want to call that, but we can't, we have no idea if the inode
- * still exists the second we drop the entry->lock.
+ * still exists the second we drop the mark->lock.
*
* The next time an event arrive to this inode from one of it's children
* __fsnotify_parent will see that the inode doesn't care about it's
@@ -221,20 +221,20 @@ void fsnotify_destroy_mark(struct fsnotify_mark *entry)
*/
void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
{
- struct fsnotify_mark *lentry, *entry;
+ struct fsnotify_mark *lmark, *mark;
LIST_HEAD(free_list);
spin_lock(&group->mark_lock);
- list_for_each_entry_safe(entry, lentry, &group->marks_list, g_list) {
- list_add(&entry->free_g_list, &free_list);
- list_del_init(&entry->g_list);
- fsnotify_get_mark(entry);
+ list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) {
+ list_add(&mark->free_g_list, &free_list);
+ list_del_init(&mark->g_list);
+ fsnotify_get_mark(mark);
}
spin_unlock(&group->mark_lock);
- list_for_each_entry_safe(entry, lentry, &free_list, free_g_list) {
- fsnotify_destroy_mark(entry);
- fsnotify_put_mark(entry);
+ list_for_each_entry_safe(mark, lmark, &free_list, free_g_list) {
+ fsnotify_destroy_mark(mark);
+ fsnotify_put_mark(mark);
}
}
@@ -243,21 +243,21 @@ void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
*/
void fsnotify_clear_marks_by_inode(struct inode *inode)
{
- struct fsnotify_mark *entry, *lentry;
+ struct fsnotify_mark *mark, *lmark;
struct hlist_node *pos, *n;
LIST_HEAD(free_list);
spin_lock(&inode->i_lock);
- hlist_for_each_entry_safe(entry, pos, n, &inode->i_fsnotify_marks, i.i_list) {
- list_add(&entry->i.free_i_list, &free_list);
- hlist_del_init(&entry->i.i_list);
- fsnotify_get_mark(entry);
+ hlist_for_each_entry_safe(mark, pos, n, &inode->i_fsnotify_marks, i.i_list) {
+ list_add(&mark->i.free_i_list, &free_list);
+ hlist_del_init(&mark->i.i_list);
+ fsnotify_get_mark(mark);
}
spin_unlock(&inode->i_lock);
- list_for_each_entry_safe(entry, lentry, &free_list, i.free_i_list) {
- fsnotify_destroy_mark(entry);
- fsnotify_put_mark(entry);
+ list_for_each_entry_safe(mark, lmark, &free_list, i.free_i_list) {
+ fsnotify_destroy_mark(mark);
+ fsnotify_put_mark(mark);
}
}
@@ -268,15 +268,15 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group,
struct inode *inode)
{
- struct fsnotify_mark *entry;
+ struct fsnotify_mark *mark;
struct hlist_node *pos;
assert_spin_locked(&inode->i_lock);
- hlist_for_each_entry(entry, pos, &inode->i_fsnotify_marks, i.i_list) {
- if (entry->group == group) {
- fsnotify_get_mark(entry);
- return entry;
+ hlist_for_each_entry(mark, pos, &inode->i_fsnotify_marks, i.i_list) {
+ if (mark->group == group) {
+ fsnotify_get_mark(mark);
+ return mark;
}
}
return NULL;
@@ -294,35 +294,35 @@ void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *ol
/*
* Nothing fancy, just initialize lists and locks and counters.
*/
-void fsnotify_init_mark(struct fsnotify_mark *entry,
- void (*free_mark)(struct fsnotify_mark *entry))
+void fsnotify_init_mark(struct fsnotify_mark *mark,
+ void (*free_mark)(struct fsnotify_mark *mark))
{
- spin_lock_init(&entry->lock);
- atomic_set(&entry->refcnt, 1);
- INIT_HLIST_NODE(&entry->i.i_list);
- entry->group = NULL;
- entry->mask = 0;
- entry->i.inode = NULL;
- entry->free_mark = free_mark;
+ spin_lock_init(&mark->lock);
+ atomic_set(&mark->refcnt, 1);
+ INIT_HLIST_NODE(&mark->i.i_list);
+ mark->group = NULL;
+ mark->mask = 0;
+ mark->i.inode = NULL;
+ mark->free_mark = free_mark;
}
/*
- * Attach an initialized mark entry to a given group and inode.
+ * Attach an initialized mark mark to a given group and inode.
* These marks may be used for the fsnotify backend to determine which
* event types should be delivered to which group and for which inodes.
*/
-int fsnotify_add_mark(struct fsnotify_mark *entry,
+int fsnotify_add_mark(struct fsnotify_mark *mark,
struct fsnotify_group *group, struct inode *inode,
int allow_dups)
{
- struct fsnotify_mark *lentry = NULL;
+ struct fsnotify_mark *lmark = NULL;
int ret = 0;
inode = igrab(inode);
if (unlikely(!inode))
return -EINVAL;
- entry->flags = FSNOTIFY_MARK_FLAG_INODE;
+ mark->flags = FSNOTIFY_MARK_FLAG_INODE;
/*
* if this group isn't being testing for inode type events we need
@@ -340,24 +340,24 @@ int fsnotify_add_mark(struct fsnotify_mark *entry,
/*
* LOCKING ORDER!!!!
- * entry->lock
+ * mark->lock
* group->mark_lock
* inode->i_lock
*/
- spin_lock(&entry->lock);
+ spin_lock(&mark->lock);
spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
if (!allow_dups)
- lentry = fsnotify_find_mark(group, inode);
- if (!lentry) {
- entry->group = group;
- entry->i.inode = inode;
+ lmark = fsnotify_find_mark(group, inode);
+ if (!lmark) {
+ mark->group = group;
+ mark->i.inode = inode;
- hlist_add_head(&entry->i.i_list, &inode->i_fsnotify_marks);
- list_add(&entry->g_list, &group->marks_list);
+ hlist_add_head(&mark->i.i_list, &inode->i_fsnotify_marks);
+ list_add(&mark->g_list, &group->marks_list);
- fsnotify_get_mark(entry); /* for i_list and g_list */
+ fsnotify_get_mark(mark); /* for i_list and g_list */
atomic_inc(&group->num_marks);
@@ -366,12 +366,12 @@ int fsnotify_add_mark(struct fsnotify_mark *entry,
spin_unlock(&inode->i_lock);
spin_unlock(&group->mark_lock);
- spin_unlock(&entry->lock);
+ spin_unlock(&mark->lock);
- if (lentry) {
+ if (lmark) {
ret = -EEXIST;
iput(inode);
- fsnotify_put_mark(lentry);
+ fsnotify_put_mark(lmark);
} else {
__fsnotify_update_child_dentry_flags(inode);
}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 83b6bfeb2d669..ff654c1932f27 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -83,7 +83,7 @@ struct fsnotify_ops {
int data_type);
int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
void (*free_group_priv)(struct fsnotify_group *group);
- void (*freeing_mark)(struct fsnotify_mark *entry, struct fsnotify_group *group);
+ void (*freeing_mark)(struct fsnotify_mark *mark, struct fsnotify_group *group);
void (*free_event_priv)(struct fsnotify_event_private_data *priv);
};
@@ -135,7 +135,7 @@ struct fsnotify_group {
/* stores all fastpath marks assoc with this group so they can be cleaned on unregister */
spinlock_t mark_lock; /* protect marks_list */
- atomic_t num_marks; /* 1 for each mark entry and 1 for not being
+ atomic_t num_marks; /* 1 for each mark and 1 for not being
* past the point of no return when freeing
* a group */
struct list_head marks_list; /* all inode marks for this group */
@@ -229,7 +229,7 @@ struct fsnotify_event {
* Inode specific fields in an fsnotify_mark
*/
struct fsnotify_inode_mark {
- struct inode *inode; /* inode this entry is associated with */
+ struct inode *inode; /* inode this mark is associated with */
struct hlist_node i_list; /* list of marks by inode->i_fsnotify_marks */
struct list_head free_i_list; /* tmp list used when freeing this mark */
};
@@ -238,13 +238,13 @@ struct fsnotify_inode_mark {
* Mount point specific fields in an fsnotify_mark
*/
struct fsnotify_vfsmount_mark {
- struct vfsmount *mnt; /* inode this entry is associated with */
+ struct vfsmount *mnt; /* vfsmount this mark is associated with */
struct hlist_node m_list; /* list of marks by inode->i_fsnotify_marks */
struct list_head free_m_list; /* tmp list used when freeing this mark */
};
/*
- * a mark is simply an entry attached to an in core inode which allows an
+ * a mark is simply an object attached to an in core inode which allows an
* fsnotify listener to indicate they are either no longer interested in events
* of a type matching mask or only interested in those events.
*
@@ -254,11 +254,11 @@ struct fsnotify_vfsmount_mark {
* inode eviction or modification.
*/
struct fsnotify_mark {
- __u32 mask; /* mask this mark entry is for */
+ __u32 mask; /* mask this mark is for */
/* we hold ref for each i_list and g_list. also one ref for each 'thing'
* in kernel that found and may be using this mark. */
atomic_t refcnt; /* active things looking at this mark */
- struct fsnotify_group *group; /* group this mark entry is for */
+ struct fsnotify_group *group; /* group this mark is for */
struct list_head g_list; /* list of marks by group->i_fsnotify_marks */
spinlock_t lock; /* protect group and inode */
union {
@@ -269,7 +269,7 @@ struct fsnotify_mark {
#define FSNOTIFY_MARK_FLAG_INODE 0x01
#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
unsigned int flags; /* vfsmount or inode mark? */
- void (*free_mark)(struct fsnotify_mark *entry); /* called on final put+free */
+ void (*free_mark)(struct fsnotify_mark *mark); /* called on final put+free */
};
#ifdef CONFIG_FSNOTIFY
@@ -361,19 +361,19 @@ extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group
/* run all marks associated with an inode and update inode->i_fsnotify_mask */
extern void fsnotify_recalc_inode_mask(struct inode *inode);
-extern void fsnotify_init_mark(struct fsnotify_mark *entry, void (*free_mark)(struct fsnotify_mark *entry));
+extern void fsnotify_init_mark(struct fsnotify_mark *mark, void (*free_mark)(struct fsnotify_mark *mark));
/* find (and take a reference) to a mark associated with group and inode */
extern struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group, struct inode *inode);
/* copy the values from old into new */
extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
/* attach the mark to both the group and the inode */
-extern int fsnotify_add_mark(struct fsnotify_mark *entry, struct fsnotify_group *group, struct inode *inode, int allow_dups);
+extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct fsnotify_group *group, struct inode *inode, int allow_dups);
/* given a mark, flag it to be freed when all references are dropped */
-extern void fsnotify_destroy_mark(struct fsnotify_mark *entry);
+extern void fsnotify_destroy_mark(struct fsnotify_mark *mark);
/* run all the marks in a group, and flag them to be freed */
extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
-extern void fsnotify_get_mark(struct fsnotify_mark *entry);
-extern void fsnotify_put_mark(struct fsnotify_mark *entry);
+extern void fsnotify_get_mark(struct fsnotify_mark *mark);
+extern void fsnotify_put_mark(struct fsnotify_mark *mark);
extern void fsnotify_unmount_inodes(struct list_head *list);
/* put here because inotify does some weird stuff when destroying watches */
--
GitLab
From 000285deb99a5e0636fdd3c6a2483a5d039ee2c2 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:24 -0500
Subject: [PATCH 088/863] inotify: rename mark_entry to just mark
rename anything in inotify that deals with mark_entry to just be mark. It
makes a lot more sense.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify.h | 7 +-
fs/notify/inotify/inotify_fsnotify.c | 48 +++----
fs/notify/inotify/inotify_user.c | 192 +++++++++++++--------------
3 files changed, 123 insertions(+), 124 deletions(-)
diff --git a/fs/notify/inotify/inotify.h b/fs/notify/inotify/inotify.h
index 07be6df2428f1..b6642e4de4bf9 100644
--- a/fs/notify/inotify/inotify.h
+++ b/fs/notify/inotify/inotify.h
@@ -9,13 +9,12 @@ struct inotify_event_private_data {
int wd;
};
-struct inotify_inode_mark_entry {
- /* fsnotify_mark MUST be the first thing */
- struct fsnotify_mark fsn_entry;
+struct inotify_inode_mark {
+ struct fsnotify_mark fsn_mark;
int wd;
};
-extern void inotify_ignored_and_remove_idr(struct fsnotify_mark *entry,
+extern void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark,
struct fsnotify_group *group);
extern void inotify_free_event_priv(struct fsnotify_event_private_data *event_priv);
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index f8a2a6eda1338..12dc72be992eb 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -88,8 +88,8 @@ static int inotify_merge(struct list_head *list, struct fsnotify_event *event)
static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
{
- struct fsnotify_mark *entry;
- struct inotify_inode_mark_entry *ientry;
+ struct fsnotify_mark *fsn_mark;
+ struct inotify_inode_mark *i_mark;
struct inode *to_tell;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
@@ -98,14 +98,14 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
to_tell = event->to_tell;
spin_lock(&to_tell->i_lock);
- entry = fsnotify_find_mark(group, to_tell);
+ fsn_mark = fsnotify_find_mark(group, to_tell);
spin_unlock(&to_tell->i_lock);
/* race with watch removal? We already passes should_send */
- if (unlikely(!entry))
+ if (unlikely(!fsn_mark))
return 0;
- ientry = container_of(entry, struct inotify_inode_mark_entry,
- fsn_entry);
- wd = ientry->wd;
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark,
+ fsn_mark);
+ wd = i_mark->wd;
event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
if (unlikely(!event_priv))
@@ -127,37 +127,37 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
}
/*
- * If we hold the entry until after the event is on the queue
+ * If we hold the fsn_mark until after the event is on the queue
* IN_IGNORED won't be able to pass this event in the queue
*/
- fsnotify_put_mark(entry);
+ fsnotify_put_mark(fsn_mark);
return ret;
}
-static void inotify_freeing_mark(struct fsnotify_mark *entry, struct fsnotify_group *group)
+static void inotify_freeing_mark(struct fsnotify_mark *fsn_mark, struct fsnotify_group *group)
{
- inotify_ignored_and_remove_idr(entry, group);
+ inotify_ignored_and_remove_idr(fsn_mark, group);
}
static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
struct vfsmount *mnt, __u32 mask, void *data,
int data_type)
{
- struct fsnotify_mark *entry;
+ struct fsnotify_mark *fsn_mark;
bool send;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_mark(group, inode);
spin_unlock(&inode->i_lock);
- if (!entry)
+ if (!fsn_mark)
return false;
mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (entry->mask & mask);
+ send = (fsn_mark->mask & mask);
/* find took a reference */
- fsnotify_put_mark(entry);
+ fsnotify_put_mark(fsn_mark);
return send;
}
@@ -171,18 +171,18 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
*/
static int idr_callback(int id, void *p, void *data)
{
- struct fsnotify_mark *entry;
- struct inotify_inode_mark_entry *ientry;
+ struct fsnotify_mark *fsn_mark;
+ struct inotify_inode_mark *i_mark;
static bool warned = false;
if (warned)
return 0;
warned = true;
- entry = p;
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ fsn_mark = p;
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
- WARN(1, "inotify closing but id=%d for entry=%p in group=%p still in "
+ WARN(1, "inotify closing but id=%d for fsn_mark=%p in group=%p still in "
"idr. Probably leaking memory\n", id, p, data);
/*
@@ -191,9 +191,9 @@ static int idr_callback(int id, void *p, void *data)
* out why we got here and the panic is no worse than the original
* BUG() that was here.
*/
- if (entry)
- printk(KERN_WARNING "entry->group=%p inode=%p wd=%d\n",
- entry->group, entry->i.inode, ientry->wd);
+ if (fsn_mark)
+ printk(KERN_WARNING "fsn_mark->group=%p inode=%p wd=%d\n",
+ fsn_mark->group, fsn_mark->i.inode, i_mark->wd);
return 0;
}
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 118085c9d2d9e..80d102acb86b9 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -353,7 +353,7 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns
static int inotify_add_to_idr(struct idr *idr, spinlock_t *idr_lock,
int *last_wd,
- struct inotify_inode_mark_entry *ientry)
+ struct inotify_inode_mark *i_mark)
{
int ret;
@@ -362,12 +362,12 @@ static int inotify_add_to_idr(struct idr *idr, spinlock_t *idr_lock,
return -ENOMEM;
spin_lock(idr_lock);
- ret = idr_get_new_above(idr, ientry, *last_wd + 1,
- &ientry->wd);
+ ret = idr_get_new_above(idr, i_mark, *last_wd + 1,
+ &i_mark->wd);
/* we added the mark to the idr, take a reference */
if (!ret) {
- fsnotify_get_mark(&ientry->fsn_entry);
- *last_wd = ientry->wd;
+ *last_wd = i_mark->wd;
+ fsnotify_get_mark(&i_mark->fsn_mark);
}
spin_unlock(idr_lock);
} while (ret == -EAGAIN);
@@ -375,53 +375,53 @@ static int inotify_add_to_idr(struct idr *idr, spinlock_t *idr_lock,
return ret;
}
-static struct inotify_inode_mark_entry *inotify_idr_find_locked(struct fsnotify_group *group,
+static struct inotify_inode_mark *inotify_idr_find_locked(struct fsnotify_group *group,
int wd)
{
struct idr *idr = &group->inotify_data.idr;
spinlock_t *idr_lock = &group->inotify_data.idr_lock;
- struct inotify_inode_mark_entry *ientry;
+ struct inotify_inode_mark *i_mark;
assert_spin_locked(idr_lock);
- ientry = idr_find(idr, wd);
- if (ientry) {
- struct fsnotify_mark *fsn_entry = &ientry->fsn_entry;
+ i_mark = idr_find(idr, wd);
+ if (i_mark) {
+ struct fsnotify_mark *fsn_mark = &i_mark->fsn_mark;
- fsnotify_get_mark(fsn_entry);
+ fsnotify_get_mark(fsn_mark);
/* One ref for being in the idr, one ref we just took */
- BUG_ON(atomic_read(&fsn_entry->refcnt) < 2);
+ BUG_ON(atomic_read(&fsn_mark->refcnt) < 2);
}
- return ientry;
+ return i_mark;
}
-static struct inotify_inode_mark_entry *inotify_idr_find(struct fsnotify_group *group,
+static struct inotify_inode_mark *inotify_idr_find(struct fsnotify_group *group,
int wd)
{
- struct inotify_inode_mark_entry *ientry;
+ struct inotify_inode_mark *i_mark;
spinlock_t *idr_lock = &group->inotify_data.idr_lock;
spin_lock(idr_lock);
- ientry = inotify_idr_find_locked(group, wd);
+ i_mark = inotify_idr_find_locked(group, wd);
spin_unlock(idr_lock);
- return ientry;
+ return i_mark;
}
static void do_inotify_remove_from_idr(struct fsnotify_group *group,
- struct inotify_inode_mark_entry *ientry)
+ struct inotify_inode_mark *i_mark)
{
struct idr *idr = &group->inotify_data.idr;
spinlock_t *idr_lock = &group->inotify_data.idr_lock;
- int wd = ientry->wd;
+ int wd = i_mark->wd;
assert_spin_locked(idr_lock);
idr_remove(idr, wd);
/* removed from the idr, drop that ref */
- fsnotify_put_mark(&ientry->fsn_entry);
+ fsnotify_put_mark(&i_mark->fsn_mark);
}
/*
@@ -429,48 +429,48 @@ static void do_inotify_remove_from_idr(struct fsnotify_group *group,
* on the mark because it was in the idr.
*/
static void inotify_remove_from_idr(struct fsnotify_group *group,
- struct inotify_inode_mark_entry *ientry)
+ struct inotify_inode_mark *i_mark)
{
spinlock_t *idr_lock = &group->inotify_data.idr_lock;
- struct inotify_inode_mark_entry *found_ientry = NULL;
+ struct inotify_inode_mark *found_i_mark = NULL;
int wd;
spin_lock(idr_lock);
- wd = ientry->wd;
+ wd = i_mark->wd;
/*
- * does this ientry think it is in the idr? we shouldn't get called
+ * does this i_mark think it is in the idr? we shouldn't get called
* if it wasn't....
*/
if (wd == -1) {
- WARN_ONCE(1, "%s: ientry=%p ientry->wd=%d ientry->group=%p"
- " ientry->inode=%p\n", __func__, ientry, ientry->wd,
- ientry->fsn_entry.group, ientry->fsn_entry.i.inode);
+ WARN_ONCE(1, "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p"
+ " i_mark->inode=%p\n", __func__, i_mark, i_mark->wd,
+ i_mark->fsn_mark.group, i_mark->fsn_mark.i.inode);
goto out;
}
/* Lets look in the idr to see if we find it */
- found_ientry = inotify_idr_find_locked(group, wd);
- if (unlikely(!found_ientry)) {
- WARN_ONCE(1, "%s: ientry=%p ientry->wd=%d ientry->group=%p"
- " ientry->inode=%p\n", __func__, ientry, ientry->wd,
- ientry->fsn_entry.group, ientry->fsn_entry.i.inode);
+ found_i_mark = inotify_idr_find_locked(group, wd);
+ if (unlikely(!found_i_mark)) {
+ WARN_ONCE(1, "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p"
+ " i_mark->inode=%p\n", __func__, i_mark, i_mark->wd,
+ i_mark->fsn_mark.group, i_mark->fsn_mark.i.inode);
goto out;
}
/*
- * We found an entry in the idr at the right wd, but it's
- * not the entry we were told to remove. eparis seriously
+ * We found an mark in the idr at the right wd, but it's
+ * not the mark we were told to remove. eparis seriously
* fucked up somewhere.
*/
- if (unlikely(found_ientry != ientry)) {
- WARN_ONCE(1, "%s: ientry=%p ientry->wd=%d ientry->group=%p "
- "entry->inode=%p found_ientry=%p found_ientry->wd=%d "
- "found_ientry->group=%p found_ientry->inode=%p\n",
- __func__, ientry, ientry->wd, ientry->fsn_entry.group,
- ientry->fsn_entry.i.inode, found_ientry, found_ientry->wd,
- found_ientry->fsn_entry.group,
- found_ientry->fsn_entry.i.inode);
+ if (unlikely(found_i_mark != i_mark)) {
+ WARN_ONCE(1, "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p "
+ "mark->inode=%p found_i_mark=%p found_i_mark->wd=%d "
+ "found_i_mark->group=%p found_i_mark->inode=%p\n",
+ __func__, i_mark, i_mark->wd, i_mark->fsn_mark.group,
+ i_mark->fsn_mark.i.inode, found_i_mark, found_i_mark->wd,
+ found_i_mark->fsn_mark.group,
+ found_i_mark->fsn_mark.i.inode);
goto out;
}
@@ -479,30 +479,30 @@ static void inotify_remove_from_idr(struct fsnotify_group *group,
* one ref held by the caller trying to kill us
* one ref grabbed by inotify_idr_find
*/
- if (unlikely(atomic_read(&ientry->fsn_entry.refcnt) < 3)) {
- printk(KERN_ERR "%s: ientry=%p ientry->wd=%d ientry->group=%p"
- " ientry->inode=%p\n", __func__, ientry, ientry->wd,
- ientry->fsn_entry.group, ientry->fsn_entry.i.inode);
+ if (unlikely(atomic_read(&i_mark->fsn_mark.refcnt) < 3)) {
+ printk(KERN_ERR "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p"
+ " i_mark->inode=%p\n", __func__, i_mark, i_mark->wd,
+ i_mark->fsn_mark.group, i_mark->fsn_mark.i.inode);
/* we can't really recover with bad ref cnting.. */
BUG();
}
- do_inotify_remove_from_idr(group, ientry);
+ do_inotify_remove_from_idr(group, i_mark);
out:
/* match the ref taken by inotify_idr_find_locked() */
- if (found_ientry)
- fsnotify_put_mark(&found_ientry->fsn_entry);
- ientry->wd = -1;
+ if (found_i_mark)
+ fsnotify_put_mark(&found_i_mark->fsn_mark);
+ i_mark->wd = -1;
spin_unlock(idr_lock);
}
/*
* Send IN_IGNORED for this wd, remove this wd from the idr.
*/
-void inotify_ignored_and_remove_idr(struct fsnotify_mark *entry,
+void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark,
struct fsnotify_group *group)
{
- struct inotify_inode_mark_entry *ientry;
+ struct inotify_inode_mark *i_mark;
struct fsnotify_event *ignored_event;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
@@ -514,7 +514,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark *entry,
if (!ignored_event)
return;
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
event_priv = kmem_cache_alloc(event_priv_cachep, GFP_NOFS);
if (unlikely(!event_priv))
@@ -523,7 +523,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark *entry,
fsn_event_priv = &event_priv->fsnotify_event_priv_data;
fsn_event_priv->group = group;
- event_priv->wd = ientry->wd;
+ event_priv->wd = i_mark->wd;
ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv, NULL);
if (ret)
@@ -534,28 +534,28 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark *entry,
/* matches the reference taken when the event was created */
fsnotify_put_event(ignored_event);
- /* remove this entry from the idr */
- inotify_remove_from_idr(group, ientry);
+ /* remove this mark from the idr */
+ inotify_remove_from_idr(group, i_mark);
atomic_dec(&group->inotify_data.user->inotify_watches);
}
/* ding dong the mark is dead */
-static void inotify_free_mark(struct fsnotify_mark *entry)
+static void inotify_free_mark(struct fsnotify_mark *fsn_mark)
{
- struct inotify_inode_mark_entry *ientry;
+ struct inotify_inode_mark *i_mark;
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
- kmem_cache_free(inotify_inode_mark_cachep, ientry);
+ kmem_cache_free(inotify_inode_mark_cachep, i_mark);
}
static int inotify_update_existing_watch(struct fsnotify_group *group,
struct inode *inode,
u32 arg)
{
- struct fsnotify_mark *entry;
- struct inotify_inode_mark_entry *ientry;
+ struct fsnotify_mark *fsn_mark;
+ struct inotify_inode_mark *i_mark;
__u32 old_mask, new_mask;
__u32 mask;
int add = (arg & IN_MASK_ADD);
@@ -567,35 +567,35 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
return -EINVAL;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_mark(group, inode);
spin_unlock(&inode->i_lock);
- if (!entry)
+ if (!fsn_mark)
return -ENOENT;
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
- spin_lock(&entry->lock);
+ spin_lock(&fsn_mark->lock);
- old_mask = entry->mask;
+ old_mask = fsn_mark->mask;
if (add) {
- entry->mask |= mask;
- new_mask = entry->mask;
+ fsn_mark->mask |= mask;
+ new_mask = fsn_mark->mask;
} else {
- entry->mask = mask;
- new_mask = entry->mask;
+ fsn_mark->mask = mask;
+ new_mask = fsn_mark->mask;
}
- spin_unlock(&entry->lock);
+ spin_unlock(&fsn_mark->lock);
if (old_mask != new_mask) {
/* more bits in old than in new? */
int dropped = (old_mask & ~new_mask);
- /* more bits in this entry than the inode's mask? */
+ /* more bits in this fsn_mark than the inode's mask? */
int do_inode = (new_mask & ~inode->i_fsnotify_mask);
- /* more bits in this entry than the group? */
+ /* more bits in this fsn_mark than the group? */
int do_group = (new_mask & ~group->mask);
- /* update the inode with this new entry */
+ /* update the inode with this new fsn_mark */
if (dropped || do_inode)
fsnotify_recalc_inode_mask(inode);
@@ -605,10 +605,10 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
}
/* return the wd */
- ret = ientry->wd;
+ ret = i_mark->wd;
/* match the get from fsnotify_find_mark() */
- fsnotify_put_mark(entry);
+ fsnotify_put_mark(fsn_mark);
return ret;
}
@@ -617,7 +617,7 @@ static int inotify_new_watch(struct fsnotify_group *group,
struct inode *inode,
u32 arg)
{
- struct inotify_inode_mark_entry *tmp_ientry;
+ struct inotify_inode_mark *tmp_i_mark;
__u32 mask;
int ret;
struct idr *idr = &group->inotify_data.idr;
@@ -628,44 +628,44 @@ static int inotify_new_watch(struct fsnotify_group *group,
if (unlikely(!mask))
return -EINVAL;
- tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
- if (unlikely(!tmp_ientry))
+ tmp_i_mark = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+ if (unlikely(!tmp_i_mark))
return -ENOMEM;
- fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
- tmp_ientry->fsn_entry.mask = mask;
- tmp_ientry->wd = -1;
+ fsnotify_init_mark(&tmp_i_mark->fsn_mark, inotify_free_mark);
+ tmp_i_mark->fsn_mark.mask = mask;
+ tmp_i_mark->wd = -1;
ret = -ENOSPC;
if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
goto out_err;
ret = inotify_add_to_idr(idr, idr_lock, &group->inotify_data.last_wd,
- tmp_ientry);
+ tmp_i_mark);
if (ret)
goto out_err;
/* we are on the idr, now get on the inode */
- ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode, 0);
+ ret = fsnotify_add_mark(&tmp_i_mark->fsn_mark, group, inode, 0);
if (ret) {
/* we failed to get on the inode, get off the idr */
- inotify_remove_from_idr(group, tmp_ientry);
+ inotify_remove_from_idr(group, tmp_i_mark);
goto out_err;
}
/* increment the number of watches the user has */
atomic_inc(&group->inotify_data.user->inotify_watches);
- /* return the watch descriptor for this new entry */
- ret = tmp_ientry->wd;
+ /* return the watch descriptor for this new mark */
+ ret = tmp_i_mark->wd;
/* if this mark added a new event update the group mask */
if (mask & ~group->mask)
fsnotify_recalc_group_mask(group);
out_err:
- /* match the ref from fsnotify_init_markentry() */
- fsnotify_put_mark(&tmp_ientry->fsn_entry);
+ /* match the ref from fsnotify_init_mark() */
+ fsnotify_put_mark(&tmp_i_mark->fsn_mark);
return ret;
}
@@ -801,7 +801,7 @@ SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
{
struct fsnotify_group *group;
- struct inotify_inode_mark_entry *ientry;
+ struct inotify_inode_mark *i_mark;
struct file *filp;
int ret = 0, fput_needed;
@@ -817,16 +817,16 @@ SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
group = filp->private_data;
ret = -EINVAL;
- ientry = inotify_idr_find(group, wd);
- if (unlikely(!ientry))
+ i_mark = inotify_idr_find(group, wd);
+ if (unlikely(!i_mark))
goto out;
ret = 0;
- fsnotify_destroy_mark(&ientry->fsn_entry);
+ fsnotify_destroy_mark(&i_mark->fsn_mark);
/* match ref taken by inotify_idr_find */
- fsnotify_put_mark(&ientry->fsn_entry);
+ fsnotify_put_mark(&i_mark->fsn_mark);
out:
fput_light(filp, fput_needed);
@@ -840,7 +840,7 @@ SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
*/
static int __init inotify_user_setup(void)
{
- inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
+ inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark, SLAB_PANIC);
event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
inotify_max_queued_events = 16384;
--
GitLab
From ef5e2b785fb3216269e6d0656d38ec286b98dbe5 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:24 -0500
Subject: [PATCH 089/863] dnotify: rename mark_entry to mark
nomenclature change. Used to call things 'entries' but now we just call
them 'marks.' Do those changes for dnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 170 ++++++++++++++++++------------------
1 file changed, 85 insertions(+), 85 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index b202bc590c61a..3efb8b9a572d6 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -29,7 +29,7 @@
int dir_notify_enable __read_mostly = 1;
static struct kmem_cache *dnotify_struct_cache __read_mostly;
-static struct kmem_cache *dnotify_mark_entry_cache __read_mostly;
+static struct kmem_cache *dnotify_mark_cache __read_mostly;
static struct fsnotify_group *dnotify_group __read_mostly;
static DEFINE_MUTEX(dnotify_mark_mutex);
@@ -38,8 +38,8 @@ static DEFINE_MUTEX(dnotify_mark_mutex);
* is being watched by dnotify. If multiple userspace applications are watching
* the same directory with dnotify their information is chained in dn
*/
-struct dnotify_mark_entry {
- struct fsnotify_mark fsn_entry;
+struct dnotify_mark {
+ struct fsnotify_mark fsn_mark;
struct dnotify_struct *dn;
};
@@ -51,27 +51,27 @@ struct dnotify_mark_entry {
* it calls the fsnotify function so it can update the set of all events relevant
* to this inode.
*/
-static void dnotify_recalc_inode_mask(struct fsnotify_mark *entry)
+static void dnotify_recalc_inode_mask(struct fsnotify_mark *fsn_mark)
{
__u32 new_mask, old_mask;
struct dnotify_struct *dn;
- struct dnotify_mark_entry *dnentry = container_of(entry,
- struct dnotify_mark_entry,
- fsn_entry);
+ struct dnotify_mark *dn_mark = container_of(fsn_mark,
+ struct dnotify_mark,
+ fsn_mark);
- assert_spin_locked(&entry->lock);
+ assert_spin_locked(&fsn_mark->lock);
- old_mask = entry->mask;
+ old_mask = fsn_mark->mask;
new_mask = 0;
- for (dn = dnentry->dn; dn != NULL; dn = dn->dn_next)
+ for (dn = dn_mark->dn; dn != NULL; dn = dn->dn_next)
new_mask |= (dn->dn_mask & ~FS_DN_MULTISHOT);
- entry->mask = new_mask;
+ fsn_mark->mask = new_mask;
if (old_mask == new_mask)
return;
- if (entry->i.inode)
- fsnotify_recalc_inode_mask(entry->i.inode);
+ if (fsn_mark->i.inode)
+ fsnotify_recalc_inode_mask(fsn_mark->i.inode);
}
/*
@@ -85,8 +85,8 @@ static void dnotify_recalc_inode_mask(struct fsnotify_mark *entry)
static int dnotify_handle_event(struct fsnotify_group *group,
struct fsnotify_event *event)
{
- struct fsnotify_mark *entry = NULL;
- struct dnotify_mark_entry *dnentry;
+ struct fsnotify_mark *fsn_mark = NULL;
+ struct dnotify_mark *dn_mark;
struct inode *to_tell;
struct dnotify_struct *dn;
struct dnotify_struct **prev;
@@ -96,16 +96,16 @@ static int dnotify_handle_event(struct fsnotify_group *group,
to_tell = event->to_tell;
spin_lock(&to_tell->i_lock);
- entry = fsnotify_find_mark(group, to_tell);
+ fsn_mark = fsnotify_find_mark(group, to_tell);
spin_unlock(&to_tell->i_lock);
/* unlikely since we alreay passed dnotify_should_send_event() */
- if (unlikely(!entry))
+ if (unlikely(!fsn_mark))
return 0;
- dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+ dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
- spin_lock(&entry->lock);
- prev = &dnentry->dn;
+ spin_lock(&fsn_mark->lock);
+ prev = &dn_mark->dn;
while ((dn = *prev) != NULL) {
if ((dn->dn_mask & test_mask) == 0) {
prev = &dn->dn_next;
@@ -118,12 +118,12 @@ static int dnotify_handle_event(struct fsnotify_group *group,
else {
*prev = dn->dn_next;
kmem_cache_free(dnotify_struct_cache, dn);
- dnotify_recalc_inode_mask(entry);
+ dnotify_recalc_inode_mask(fsn_mark);
}
}
- spin_unlock(&entry->lock);
- fsnotify_put_mark(entry);
+ spin_unlock(&fsn_mark->lock);
+ fsnotify_put_mark(fsn_mark);
return 0;
}
@@ -136,7 +136,7 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
struct inode *inode, struct vfsmount *mnt,
__u32 mask, void *data, int data_type)
{
- struct fsnotify_mark *entry;
+ struct fsnotify_mark *fsn_mark;
bool send;
/* !dir_notify_enable should never get here, don't waste time checking
@@ -148,30 +148,30 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
return false;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_mark(group, inode);
spin_unlock(&inode->i_lock);
/* no mark means no dnotify watch */
- if (!entry)
+ if (!fsn_mark)
return false;
mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (mask & entry->mask);
+ send = (mask & fsn_mark->mask);
- fsnotify_put_mark(entry); /* matches fsnotify_find_mark */
+ fsnotify_put_mark(fsn_mark); /* matches fsnotify_find_mark */
return send;
}
-static void dnotify_free_mark(struct fsnotify_mark *entry)
+static void dnotify_free_mark(struct fsnotify_mark *fsn_mark)
{
- struct dnotify_mark_entry *dnentry = container_of(entry,
- struct dnotify_mark_entry,
- fsn_entry);
+ struct dnotify_mark *dn_mark = container_of(fsn_mark,
+ struct dnotify_mark,
+ fsn_mark);
- BUG_ON(dnentry->dn);
+ BUG_ON(dn_mark->dn);
- kmem_cache_free(dnotify_mark_entry_cache, dnentry);
+ kmem_cache_free(dnotify_mark_cache, dn_mark);
}
static struct fsnotify_ops dnotify_fsnotify_ops = {
@@ -191,8 +191,8 @@ static struct fsnotify_ops dnotify_fsnotify_ops = {
*/
void dnotify_flush(struct file *filp, fl_owner_t id)
{
- struct fsnotify_mark *entry;
- struct dnotify_mark_entry *dnentry;
+ struct fsnotify_mark *fsn_mark;
+ struct dnotify_mark *dn_mark;
struct dnotify_struct *dn;
struct dnotify_struct **prev;
struct inode *inode;
@@ -202,37 +202,37 @@ void dnotify_flush(struct file *filp, fl_owner_t id)
return;
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark(dnotify_group, inode);
+ fsn_mark = fsnotify_find_mark(dnotify_group, inode);
spin_unlock(&inode->i_lock);
- if (!entry)
+ if (!fsn_mark)
return;
- dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+ dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
mutex_lock(&dnotify_mark_mutex);
- spin_lock(&entry->lock);
- prev = &dnentry->dn;
+ spin_lock(&fsn_mark->lock);
+ prev = &dn_mark->dn;
while ((dn = *prev) != NULL) {
if ((dn->dn_owner == id) && (dn->dn_filp == filp)) {
*prev = dn->dn_next;
kmem_cache_free(dnotify_struct_cache, dn);
- dnotify_recalc_inode_mask(entry);
+ dnotify_recalc_inode_mask(fsn_mark);
break;
}
prev = &dn->dn_next;
}
- spin_unlock(&entry->lock);
+ spin_unlock(&fsn_mark->lock);
/* nothing else could have found us thanks to the dnotify_mark_mutex */
- if (dnentry->dn == NULL)
- fsnotify_destroy_mark(entry);
+ if (dn_mark->dn == NULL)
+ fsnotify_destroy_mark(fsn_mark);
fsnotify_recalc_group_mask(dnotify_group);
mutex_unlock(&dnotify_mark_mutex);
- fsnotify_put_mark(entry);
+ fsnotify_put_mark(fsn_mark);
}
/* this conversion is done only at watch creation */
@@ -264,12 +264,12 @@ static __u32 convert_arg(unsigned long arg)
* onto that mark. This function either attaches the new dnotify_struct onto
* that list, or it |= the mask onto an existing dnofiy_struct.
*/
-static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark_entry *dnentry,
+static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark *dn_mark,
fl_owner_t id, int fd, struct file *filp, __u32 mask)
{
struct dnotify_struct *odn;
- odn = dnentry->dn;
+ odn = dn_mark->dn;
while (odn != NULL) {
/* adding more events to existing dnofiy_struct? */
if ((odn->dn_owner == id) && (odn->dn_filp == filp)) {
@@ -284,8 +284,8 @@ static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark_entry *dnent
dn->dn_fd = fd;
dn->dn_filp = filp;
dn->dn_owner = id;
- dn->dn_next = dnentry->dn;
- dnentry->dn = dn;
+ dn->dn_next = dn_mark->dn;
+ dn_mark->dn = dn;
return 0;
}
@@ -297,8 +297,8 @@ static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark_entry *dnent
*/
int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
{
- struct dnotify_mark_entry *new_dnentry, *dnentry;
- struct fsnotify_mark *new_entry, *entry;
+ struct dnotify_mark *new_dn_mark, *dn_mark;
+ struct fsnotify_mark *new_fsn_mark, *fsn_mark;
struct dnotify_struct *dn;
struct inode *inode;
fl_owner_t id = current->files;
@@ -307,7 +307,7 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
__u32 mask;
/* we use these to tell if we need to kfree */
- new_entry = NULL;
+ new_fsn_mark = NULL;
dn = NULL;
if (!dir_notify_enable) {
@@ -337,8 +337,8 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
}
/* new fsnotify mark, we expect most fcntl calls to add a new mark */
- new_dnentry = kmem_cache_alloc(dnotify_mark_entry_cache, GFP_KERNEL);
- if (!new_dnentry) {
+ new_dn_mark = kmem_cache_alloc(dnotify_mark_cache, GFP_KERNEL);
+ if (!new_dn_mark) {
error = -ENOMEM;
goto out_err;
}
@@ -346,29 +346,29 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
/* convert the userspace DN_* "arg" to the internal FS_* defines in fsnotify */
mask = convert_arg(arg);
- /* set up the new_entry and new_dnentry */
- new_entry = &new_dnentry->fsn_entry;
- fsnotify_init_mark(new_entry, dnotify_free_mark);
- new_entry->mask = mask;
- new_dnentry->dn = NULL;
+ /* set up the new_fsn_mark and new_dn_mark */
+ new_fsn_mark = &new_dn_mark->fsn_mark;
+ fsnotify_init_mark(new_fsn_mark, dnotify_free_mark);
+ new_fsn_mark->mask = mask;
+ new_dn_mark->dn = NULL;
/* this is needed to prevent the fcntl/close race described below */
mutex_lock(&dnotify_mark_mutex);
- /* add the new_entry or find an old one. */
+ /* add the new_fsn_mark or find an old one. */
spin_lock(&inode->i_lock);
- entry = fsnotify_find_mark(dnotify_group, inode);
+ fsn_mark = fsnotify_find_mark(dnotify_group, inode);
spin_unlock(&inode->i_lock);
- if (entry) {
- dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
- spin_lock(&entry->lock);
+ if (fsn_mark) {
+ dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
+ spin_lock(&fsn_mark->lock);
} else {
- fsnotify_add_mark(new_entry, dnotify_group, inode, 0);
- spin_lock(&new_entry->lock);
- entry = new_entry;
- dnentry = new_dnentry;
- /* we used new_entry, so don't free it */
- new_entry = NULL;
+ fsnotify_add_mark(new_fsn_mark, dnotify_group, inode, 0);
+ spin_lock(&new_fsn_mark->lock);
+ fsn_mark = new_fsn_mark;
+ dn_mark = new_dn_mark;
+ /* we used new_fsn_mark, so don't free it */
+ new_fsn_mark = NULL;
}
rcu_read_lock();
@@ -377,17 +377,17 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
/* if (f != filp) means that we lost a race and another task/thread
* actually closed the fd we are still playing with before we grabbed
- * the dnotify_mark_mutex and entry->lock. Since closing the fd is the
+ * the dnotify_mark_mutex and fsn_mark->lock. Since closing the fd is the
* only time we clean up the marks we need to get our mark off
* the list. */
if (f != filp) {
/* if we added ourselves, shoot ourselves, it's possible that
- * the flush actually did shoot this entry. That's fine too
+ * the flush actually did shoot this fsn_mark. That's fine too
* since multiple calls to destroy_mark is perfectly safe, if
- * we found a dnentry already attached to the inode, just sod
+ * we found a dn_mark already attached to the inode, just sod
* off silently as the flush at close time dealt with it.
*/
- if (dnentry == new_dnentry)
+ if (dn_mark == new_dn_mark)
destroy = 1;
goto out;
}
@@ -395,13 +395,13 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
if (error) {
/* if we added, we must shoot */
- if (dnentry == new_dnentry)
+ if (dn_mark == new_dn_mark)
destroy = 1;
goto out;
}
- error = attach_dn(dn, dnentry, id, fd, filp, mask);
- /* !error means that we attached the dn to the dnentry, so don't free it */
+ error = attach_dn(dn, dn_mark, id, fd, filp, mask);
+ /* !error means that we attached the dn to the dn_mark, so don't free it */
if (!error)
dn = NULL;
/* -EEXIST means that we didn't add this new dn and used an old one.
@@ -409,20 +409,20 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
else if (error == -EEXIST)
error = 0;
- dnotify_recalc_inode_mask(entry);
+ dnotify_recalc_inode_mask(fsn_mark);
out:
- spin_unlock(&entry->lock);
+ spin_unlock(&fsn_mark->lock);
if (destroy)
- fsnotify_destroy_mark(entry);
+ fsnotify_destroy_mark(fsn_mark);
fsnotify_recalc_group_mask(dnotify_group);
mutex_unlock(&dnotify_mark_mutex);
- fsnotify_put_mark(entry);
+ fsnotify_put_mark(fsn_mark);
out_err:
- if (new_entry)
- fsnotify_put_mark(new_entry);
+ if (new_fsn_mark)
+ fsnotify_put_mark(new_fsn_mark);
if (dn)
kmem_cache_free(dnotify_struct_cache, dn);
return error;
@@ -431,7 +431,7 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
static int __init dnotify_init(void)
{
dnotify_struct_cache = KMEM_CACHE(dnotify_struct, SLAB_PANIC);
- dnotify_mark_entry_cache = KMEM_CACHE(dnotify_mark_entry, SLAB_PANIC);
+ dnotify_mark_cache = KMEM_CACHE(dnotify_mark, SLAB_PANIC);
dnotify_group = fsnotify_alloc_group(&dnotify_fsnotify_ops);
if (IS_ERR(dnotify_group))
--
GitLab
From 35566087099c3ff8901d65ee98af56347ee66e5a Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:25 -0500
Subject: [PATCH 090/863] fsnotify: take inode->i_lock inside
fsnotify_find_mark_entry()
All callers to fsnotify_find_mark_entry() except one take and
release inode->i_lock around the call. Take the lock inside
fsnotify_find_mark_entry() instead.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 12 ------------
fs/notify/inode_mark.c | 26 +++++++++++++++++++-------
fs/notify/inotify/inotify_fsnotify.c | 4 ----
fs/notify/inotify/inotify_user.c | 2 --
kernel/audit_tree.c | 2 --
kernel/audit_watch.c | 5 -----
6 files changed, 19 insertions(+), 32 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 3efb8b9a572d6..cac2eb896639f 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -95,11 +95,7 @@ static int dnotify_handle_event(struct fsnotify_group *group,
to_tell = event->to_tell;
- spin_lock(&to_tell->i_lock);
fsn_mark = fsnotify_find_mark(group, to_tell);
- spin_unlock(&to_tell->i_lock);
-
- /* unlikely since we alreay passed dnotify_should_send_event() */
if (unlikely(!fsn_mark))
return 0;
dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
@@ -147,11 +143,7 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
if (!S_ISDIR(inode->i_mode))
return false;
- spin_lock(&inode->i_lock);
fsn_mark = fsnotify_find_mark(group, inode);
- spin_unlock(&inode->i_lock);
-
- /* no mark means no dnotify watch */
if (!fsn_mark)
return false;
@@ -201,9 +193,7 @@ void dnotify_flush(struct file *filp, fl_owner_t id)
if (!S_ISDIR(inode->i_mode))
return;
- spin_lock(&inode->i_lock);
fsn_mark = fsnotify_find_mark(dnotify_group, inode);
- spin_unlock(&inode->i_lock);
if (!fsn_mark)
return;
dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
@@ -356,9 +346,7 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
mutex_lock(&dnotify_mark_mutex);
/* add the new_fsn_mark or find an old one. */
- spin_lock(&inode->i_lock);
fsn_mark = fsnotify_find_mark(dnotify_group, inode);
- spin_unlock(&inode->i_lock);
if (fsn_mark) {
dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
spin_lock(&fsn_mark->lock);
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 27c1b43ad739e..ba6f9833561bf 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -261,12 +261,8 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
}
}
-/*
- * given a group and inode, find the mark associated with that combination.
- * if found take a reference to that mark and return it, else return NULL
- */
-struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group,
- struct inode *inode)
+static struct fsnotify_mark *fsnotify_find_mark_locked(struct fsnotify_group *group,
+ struct inode *inode)
{
struct fsnotify_mark *mark;
struct hlist_node *pos;
@@ -282,6 +278,22 @@ struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group,
return NULL;
}
+/*
+ * given a group and inode, find the mark associated with that combination.
+ * if found take a reference to that mark and return it, else return NULL
+ */
+struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group,
+ struct inode *inode)
+{
+ struct fsnotify_mark *mark;
+
+ spin_lock(&inode->i_lock);
+ mark = fsnotify_find_mark_locked(group, inode);
+ spin_unlock(&inode->i_lock);
+
+ return mark;
+}
+
void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old)
{
assert_spin_locked(&old->lock);
@@ -349,7 +361,7 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
spin_lock(&inode->i_lock);
if (!allow_dups)
- lmark = fsnotify_find_mark(group, inode);
+ lmark = fsnotify_find_mark_locked(group, inode);
if (!lmark) {
mark->group = group;
mark->i.inode = inode;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 12dc72be992eb..cc8f6bcbb4a3e 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -97,9 +97,7 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
to_tell = event->to_tell;
- spin_lock(&to_tell->i_lock);
fsn_mark = fsnotify_find_mark(group, to_tell);
- spin_unlock(&to_tell->i_lock);
/* race with watch removal? We already passes should_send */
if (unlikely(!fsn_mark))
return 0;
@@ -147,9 +145,7 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
struct fsnotify_mark *fsn_mark;
bool send;
- spin_lock(&inode->i_lock);
fsn_mark = fsnotify_find_mark(group, inode);
- spin_unlock(&inode->i_lock);
if (!fsn_mark)
return false;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 80d102acb86b9..ad5a1ea7827e4 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -566,9 +566,7 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
if (unlikely(!mask))
return -EINVAL;
- spin_lock(&inode->i_lock);
fsn_mark = fsnotify_find_mark(group, inode);
- spin_unlock(&inode->i_lock);
if (!fsn_mark)
return -ENOENT;
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index b20fb055d7121..80f8ac328aad1 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -360,9 +360,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
struct node *p;
int n;
- spin_lock(&inode->i_lock);
old_entry = fsnotify_find_mark(audit_tree_group, inode);
- spin_unlock(&inode->i_lock);
if (!old_entry)
return create_chunk(inode, tree);
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 24ecbebf43541..d85fa538a722a 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -101,10 +101,7 @@ static inline struct audit_parent *audit_find_parent(struct inode *inode)
struct audit_parent *parent = NULL;
struct fsnotify_mark *entry;
- spin_lock(&inode->i_lock);
entry = fsnotify_find_mark(audit_watch_group, inode);
- spin_unlock(&inode->i_lock);
-
if (entry)
parent = container_of(entry, struct audit_parent, mark);
@@ -520,9 +517,7 @@ static bool audit_watch_should_send_event(struct fsnotify_group *group, struct i
struct fsnotify_mark *entry;
bool send;
- spin_lock(&inode->i_lock);
entry = fsnotify_find_mark(group, inode);
- spin_unlock(&inode->i_lock);
if (!entry)
return false;
--
GitLab
From ecf081d1a73b077916f514f2ec744ded32b88ca1 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:25 -0500
Subject: [PATCH 091/863] vfs: introduce FMODE_NONOTIFY
This is a new f_mode which can only be set by the kernel. It indicates
that the fd was opened by fanotify and should not cause future fanotify
events. This is needed to prevent fanotify livelock. An example of
obvious livelock is from fanotify close events.
Process A closes file1
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
notice a pattern?
The fix is to add the FMODE_NONOTIFY bit to the open filp done by the kernel
for fanotify. Thus when that file is used it will not generate future
events.
This patch simply defines the bit.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
include/asm-generic/fcntl.h | 8 ++++++++
include/linux/fs.h | 6 +++++-
include/linux/fsnotify.h | 24 ++++++++++++++++--------
3 files changed, 29 insertions(+), 9 deletions(-)
diff --git a/include/asm-generic/fcntl.h b/include/asm-generic/fcntl.h
index fcd268ce06744..009bd6149d995 100644
--- a/include/asm-generic/fcntl.h
+++ b/include/asm-generic/fcntl.h
@@ -3,6 +3,14 @@
#include <linux/types.h>
+/*
+ * FMODE_EXEC is 0x20
+ * FMODE_NONOTIFY is 0x800000
+ * These cannot be used by userspace O_* until internal and external open
+ * flags are split.
+ * -Eric Paris
+ */
+
#define O_ACCMODE 00000003
#define O_RDONLY 00000000
#define O_WRONLY 00000001
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 85fe89c43487c..50ef4d4c95bf0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -90,6 +90,9 @@ struct inodes_stat_t {
/* Expect random access pattern */
#define FMODE_RANDOM ((__force fmode_t)0x1000)
+/* File was opened by fanotify and shouldn't generate fanotify events */
+#define FMODE_NONOTIFY ((__force fmode_t)8388608)
+
/*
* The below are the various read and write types that we support. Some of
* them include behavioral modifiers that send information down to the
@@ -2508,7 +2511,8 @@ int proc_nr_files(struct ctl_table *table, int write,
int __init get_filesystem_list(char *buf);
#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
-#define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE))
+#define OPEN_FMODE(flag) ((__force fmode_t)(((flag + 1) & O_ACCMODE) | \
+ (flag & FMODE_NONOTIFY)))
#endif /* __KERNEL__ */
#endif /* _LINUX_FS_H */
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 62e93a9dd1150..5184a2b786c1e 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -165,8 +165,10 @@ static inline void fsnotify_access(struct file *file)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(path, NULL, mask);
- fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ if (!(file->f_mode & FMODE_NONOTIFY)) {
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ }
}
/*
@@ -181,8 +183,10 @@ static inline void fsnotify_modify(struct file *file)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(path, NULL, mask);
- fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ if (!(file->f_mode & FMODE_NONOTIFY)) {
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ }
}
/*
@@ -197,8 +201,10 @@ static inline void fsnotify_open(struct file *file)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(path, NULL, mask);
- fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ if (!(file->f_mode & FMODE_NONOTIFY)) {
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ }
}
/*
@@ -214,8 +220,10 @@ static inline void fsnotify_close(struct file *file)
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
- fsnotify_parent(path, NULL, mask);
- fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ if (!(file->f_mode & FMODE_NONOTIFY)) {
+ fsnotify_parent(path, NULL, mask);
+ fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ }
}
/*
--
GitLab
From 12ed2e36c98aec6c41559222e311f4aa15d254b6 Mon Sep 17 00:00:00 2001
From: "Signed-off-by: Wu Fengguang" <fengguang.wu@intel.com>
Date: Mon, 8 Feb 2010 12:31:29 -0500
Subject: [PATCH 092/863] fanotify: FMODE_NONOTIFY and __O_SYNC in sparc
conflict
sparc used the same value as FMODE_NONOTIFY so change FMODE_NONOTIFY to be
something unique.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
include/asm-generic/fcntl.h | 2 +-
include/linux/fs.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/asm-generic/fcntl.h b/include/asm-generic/fcntl.h
index 009bd6149d995..e3cbc38bdcc21 100644
--- a/include/asm-generic/fcntl.h
+++ b/include/asm-generic/fcntl.h
@@ -5,7 +5,7 @@
/*
* FMODE_EXEC is 0x20
- * FMODE_NONOTIFY is 0x800000
+ * FMODE_NONOTIFY is 0x1000000
* These cannot be used by userspace O_* until internal and external open
* flags are split.
* -Eric Paris
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 50ef4d4c95bf0..f9a0032787588 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -91,7 +91,7 @@ struct inodes_stat_t {
#define FMODE_RANDOM ((__force fmode_t)0x1000)
/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY ((__force fmode_t)8388608)
+#define FMODE_NONOTIFY ((__force fmode_t)16777216) /* 0x1000000 */
/*
* The below are the various read and write types that we support. Some of
--
GitLab
From ff0b16a9850e8a240ad59e10b0a1291a8fcf7cbc Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:25 -0500
Subject: [PATCH 093/863] fanotify: fscking all notification system
fanotify is a novel file notification system which bases notification on
giving userspace both an event type (open, close, read, write) and an open
file descriptor to the object in question. This should address a number of
races and problems with other notification systems like inotify and dnotify
and should allow the future implementation of blocking or access controlled
notification. These are useful for on access scanners or hierachical storage
management schemes.
This patch just implements the basics of the fsnotify functions.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/Kconfig | 1 +
fs/notify/Makefile | 1 +
fs/notify/fanotify/Kconfig | 11 +++++
fs/notify/fanotify/Makefile | 1 +
fs/notify/fanotify/fanotify.c | 78 +++++++++++++++++++++++++++++++++++
fs/notify/fanotify/fanotify.h | 12 ++++++
include/linux/Kbuild | 1 +
include/linux/fanotify.h | 40 ++++++++++++++++++
8 files changed, 145 insertions(+)
create mode 100644 fs/notify/fanotify/Kconfig
create mode 100644 fs/notify/fanotify/Makefile
create mode 100644 fs/notify/fanotify/fanotify.c
create mode 100644 fs/notify/fanotify/fanotify.h
create mode 100644 include/linux/fanotify.h
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index dffbb0911d022..22c629eedd82d 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -3,3 +3,4 @@ config FSNOTIFY
source "fs/notify/dnotify/Kconfig"
source "fs/notify/inotify/Kconfig"
+source "fs/notify/fanotify/Kconfig"
diff --git a/fs/notify/Makefile b/fs/notify/Makefile
index 0922cc826c46b..396a387793718 100644
--- a/fs/notify/Makefile
+++ b/fs/notify/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_FSNOTIFY) += fsnotify.o notification.o group.o inode_mark.o
obj-y += dnotify/
obj-y += inotify/
+obj-y += fanotify/
diff --git a/fs/notify/fanotify/Kconfig b/fs/notify/fanotify/Kconfig
new file mode 100644
index 0000000000000..f9d7ae081f858
--- /dev/null
+++ b/fs/notify/fanotify/Kconfig
@@ -0,0 +1,11 @@
+config FANOTIFY
+ bool "Filesystem wide access notification"
+ select FSNOTIFY
+ default y
+ ---help---
+ Say Y here to enable fanotify suport. fanotify is a file access
+ notification system which differs from inotify in that it sends
+ and open file descriptor to the userspace listener along with
+ the event.
+
+ If unsure, say Y.
diff --git a/fs/notify/fanotify/Makefile b/fs/notify/fanotify/Makefile
new file mode 100644
index 0000000000000..e7d39c05b0fee
--- /dev/null
+++ b/fs/notify/fanotify/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_FANOTIFY) += fanotify.o
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
new file mode 100644
index 0000000000000..3ffb9dbcab080
--- /dev/null
+++ b/fs/notify/fanotify/fanotify.c
@@ -0,0 +1,78 @@
+#include <linux/fdtable.h>
+#include <linux/fsnotify_backend.h>
+#include <linux/init.h>
+#include <linux/kernel.h> /* UINT_MAX */
+#include <linux/types.h>
+
+#include "fanotify.h"
+
+static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+{
+ int ret;
+
+
+ BUILD_BUG_ON(FAN_ACCESS != FS_ACCESS);
+ BUILD_BUG_ON(FAN_MODIFY != FS_MODIFY);
+ BUILD_BUG_ON(FAN_CLOSE_NOWRITE != FS_CLOSE_NOWRITE);
+ BUILD_BUG_ON(FAN_CLOSE_WRITE != FS_CLOSE_WRITE);
+ BUILD_BUG_ON(FAN_OPEN != FS_OPEN);
+ BUILD_BUG_ON(FAN_EVENT_ON_CHILD != FS_EVENT_ON_CHILD);
+ BUILD_BUG_ON(FAN_Q_OVERFLOW != FS_Q_OVERFLOW);
+
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
+ ret = fsnotify_add_notify_event(group, event, NULL, NULL);
+
+ return ret;
+}
+
+static bool fanotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
+ struct vfsmount *mnt, __u32 mask, void *data,
+ int data_type)
+{
+ struct fsnotify_mark *fsn_mark;
+ bool send;
+
+ pr_debug("%s: group=%p inode=%p mask=%x data=%p data_type=%d\n",
+ __func__, group, inode, mask, data, data_type);
+
+ /* sorry, fanotify only gives a damn about files and dirs */
+ if (!S_ISREG(inode->i_mode) &&
+ !S_ISDIR(inode->i_mode))
+ return false;
+
+ /* if we don't have enough info to send an event to userspace say no */
+ if (data_type != FSNOTIFY_EVENT_PATH)
+ return false;
+
+ fsn_mark = fsnotify_find_mark(group, inode);
+ if (!fsn_mark)
+ return false;
+
+ /* if the event is for a child and this inode doesn't care about
+ * events on the child, don't send it! */
+ if ((mask & FS_EVENT_ON_CHILD) &&
+ !(fsn_mark->mask & FS_EVENT_ON_CHILD)) {
+ send = false;
+ } else {
+ /*
+ * We care about children, but do we care about this particular
+ * type of event?
+ */
+ mask = (mask & ~FS_EVENT_ON_CHILD);
+ send = (fsn_mark->mask & mask);
+ }
+
+ /* find took a reference */
+ fsnotify_put_mark(fsn_mark);
+
+ return send;
+}
+
+const struct fsnotify_ops fanotify_fsnotify_ops = {
+ .handle_event = fanotify_handle_event,
+ .should_send_event = fanotify_should_send_event,
+ .free_group_priv = NULL,
+ .free_event_priv = NULL,
+ .freeing_mark = NULL,
+};
diff --git a/fs/notify/fanotify/fanotify.h b/fs/notify/fanotify/fanotify.h
new file mode 100644
index 0000000000000..50765eb30fe4b
--- /dev/null
+++ b/fs/notify/fanotify/fanotify.h
@@ -0,0 +1,12 @@
+#include <linux/fanotify.h>
+#include <linux/fsnotify_backend.h>
+#include <linux/net.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+static inline bool fanotify_mask_valid(__u32 mask)
+{
+ if (mask & ~((__u32)FAN_ALL_INCOMING_EVENTS))
+ return false;
+ return true;
+}
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 2fc8e14cc24a8..d5cca9a05f14d 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -210,6 +210,7 @@ unifdef-y += ethtool.h
unifdef-y += eventpoll.h
unifdef-y += signalfd.h
unifdef-y += ext2_fs.h
+unifdef-y += fanotify.h
unifdef-y += fb.h
unifdef-y += fcntl.h
unifdef-y += filter.h
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
new file mode 100644
index 0000000000000..b560f86d1401e
--- /dev/null
+++ b/include/linux/fanotify.h
@@ -0,0 +1,40 @@
+#ifndef _LINUX_FANOTIFY_H
+#define _LINUX_FANOTIFY_H
+
+#include <linux/types.h>
+
+/* the following events that user-space can register for */
+#define FAN_ACCESS 0x00000001 /* File was accessed */
+#define FAN_MODIFY 0x00000002 /* File was modified */
+#define FAN_CLOSE_WRITE 0x00000008 /* Unwrittable file closed */
+#define FAN_CLOSE_NOWRITE 0x00000010 /* Writtable file closed */
+#define FAN_OPEN 0x00000020 /* File was opened */
+
+#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */
+
+/* FIXME currently Q's have no limit.... */
+#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
+
+/* helper events */
+#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility. Apps will get only the
+ * events that they originally wanted. Be sure to add new events here!
+ */
+#define FAN_ALL_EVENTS (FAN_ACCESS |\
+ FAN_MODIFY |\
+ FAN_CLOSE |\
+ FAN_OPEN)
+
+/*
+ * All legal FAN bits userspace can request (although possibly not all
+ * at the same time.
+ */
+#define FAN_ALL_INCOMING_EVENTS (FAN_ALL_EVENTS |\
+ FAN_EVENT_ON_CHILD)
+#ifdef __KERNEL__
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_FANOTIFY_H */
--
GitLab
From 767cd46c332d1360cdbe46ef18d80c3ade06fdc1 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:25 -0500
Subject: [PATCH 094/863] fanotify:drop notification if they exist in the
outgoing queue
fanotify listeners get an open file descriptor to the object in question so
the ordering of operations is not as important as in other notification
systems. inotify will drop events if the last event in the event FIFO is
the same as the current event. This patch will drop fanotify events if
they are the same as another event anywhere in the event FIFO.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 45 +++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 3ffb9dbcab080..c35c1175c4cfb 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -6,6 +6,45 @@
#include "fanotify.h"
+static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
+{
+ pr_debug("%s: old=%p new=%p\n", __func__, old, new);
+
+ if ((old->mask == new->mask) &&
+ (old->to_tell == new->to_tell) &&
+ (old->data_type == new->data_type)) {
+ switch (old->data_type) {
+ case (FSNOTIFY_EVENT_PATH):
+ if ((old->path.mnt == new->path.mnt) &&
+ (old->path.dentry == new->path.dentry))
+ return true;
+ case (FSNOTIFY_EVENT_NONE):
+ return true;
+ default:
+ BUG();
+ };
+ }
+ return false;
+}
+
+static int fanotify_merge(struct list_head *list, struct fsnotify_event *event)
+{
+ struct fsnotify_event_holder *holder;
+ struct fsnotify_event *test_event;
+
+ pr_debug("%s: list=%p event=%p\n", __func__, list, event);
+
+ /* and the list better be locked by something too! */
+
+ list_for_each_entry_reverse(holder, list, event_list) {
+ test_event = holder->event;
+ if (should_merge(test_event, event))
+ return -EEXIST;
+ }
+
+ return 0;
+}
+
static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
{
int ret;
@@ -21,8 +60,10 @@ static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_e
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- ret = fsnotify_add_notify_event(group, event, NULL, NULL);
-
+ ret = fsnotify_add_notify_event(group, event, NULL, fanotify_merge);
+ /* -EEXIST means this event was merged with another, not that it was an error */
+ if (ret == -EEXIST)
+ ret = 0;
return ret;
}
--
GitLab
From a12a7dd3284f5644326af1ea53b35030f205dd29 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:25 -0500
Subject: [PATCH 095/863] fanotify: merge notification events with different
masks
Instead of just merging fanotify events if they are exactly the same, merge
notification events with different masks. To do this we have to clone the
old event, update the mask in the new event with the new merged mask, and
put the new event in place of the old event.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 39 +++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 9 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index c35c1175c4cfb..8e574d6f6a80f 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -10,8 +10,7 @@ static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
{
pr_debug("%s: old=%p new=%p\n", __func__, old, new);
- if ((old->mask == new->mask) &&
- (old->to_tell == new->to_tell) &&
+ if ((old->to_tell == new->to_tell) &&
(old->data_type == new->data_type)) {
switch (old->data_type) {
case (FSNOTIFY_EVENT_PATH):
@@ -29,20 +28,42 @@ static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
static int fanotify_merge(struct list_head *list, struct fsnotify_event *event)
{
- struct fsnotify_event_holder *holder;
+ struct fsnotify_event_holder *test_holder;
struct fsnotify_event *test_event;
+ struct fsnotify_event *new_event;
+ int ret = 0;
pr_debug("%s: list=%p event=%p\n", __func__, list, event);
/* and the list better be locked by something too! */
- list_for_each_entry_reverse(holder, list, event_list) {
- test_event = holder->event;
- if (should_merge(test_event, event))
- return -EEXIST;
+ list_for_each_entry_reverse(test_holder, list, event_list) {
+ test_event = test_holder->event;
+ if (should_merge(test_event, event)) {
+ ret = -EEXIST;
+
+ /* if they are exactly the same we are done */
+ if (test_event->mask == event->mask)
+ goto out;
+
+ /* can't allocate memory, merge was no possible */
+ new_event = fsnotify_clone_event(test_event);
+ if (unlikely(!new_event)) {
+ ret = 0;
+ goto out;
+ }
+
+ /* build new event and replace it on the list */
+ new_event->mask = (test_event->mask | event->mask);
+ fsnotify_replace_event(test_holder, new_event);
+ /* match ref from fsnotify_clone_event() */
+ fsnotify_put_event(new_event);
+
+ break;
+ }
}
-
- return 0;
+out:
+ return ret;
}
static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
--
GitLab
From 9dced01a0939f3e952eca8c21427ceec1f473dcf Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:25 -0500
Subject: [PATCH 096/863] fanotify: do not clone on merge unless needed
Currently if 2 events are going to be merged on the notication queue with
different masks the second event will be cloned and will replace the first
event. However if this notification queue is the only place referencing
the event in question there is no reason not to just update the event in
place. We can tell this if the event->refcnt == 1. Since we hold a
reference for each queue this event is on we know that when refcnt == 1
this is the only queue. The other concern is that it might be about to be
added to a new queue, but this can't be the case since fsnotify holds a
reference on the event until it is finished adding it to queues.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 8e574d6f6a80f..5b0b6b485a9cb 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -46,6 +46,16 @@ static int fanotify_merge(struct list_head *list, struct fsnotify_event *event)
if (test_event->mask == event->mask)
goto out;
+ /*
+ * if the refcnt == 1 this is the only queue
+ * for this event and so we can update the mask
+ * in place.
+ */
+ if (atomic_read(&test_event->refcnt) == 1) {
+ test_event->mask |= event->mask;
+ goto out;
+ }
+
/* can't allocate memory, merge was no possible */
new_event = fsnotify_clone_event(test_event);
if (unlikely(!new_event)) {
--
GitLab
From 11637e4b7dc098e9a863f0a619d55ebc60f5949e Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:25 -0500
Subject: [PATCH 097/863] fanotify: fanotify_init syscall declaration
This patch defines a new syscall fanotify_init() of the form:
int sys_fanotify_init(unsigned int flags, unsigned int event_f_flags,
unsigned int priority)
This syscall is used to create and fanotify group. This is very similar to
the inotify_init() syscall.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
arch/x86/ia32/ia32entry.S | 1 +
arch/x86/include/asm/unistd_32.h | 3 ++-
arch/x86/include/asm/unistd_64.h | 2 ++
arch/x86/kernel/syscall_table_32.S | 1 +
fs/notify/fanotify/Makefile | 2 +-
fs/notify/fanotify/fanotify_user.c | 13 +++++++++++++
include/linux/syscalls.h | 2 ++
kernel/sys_ni.c | 3 +++
8 files changed, 25 insertions(+), 2 deletions(-)
create mode 100644 fs/notify/fanotify/fanotify_user.c
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index e790bc1fbfa3a..586cb3be2e323 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -842,4 +842,5 @@ ia32_sys_call_table:
.quad compat_sys_rt_tgsigqueueinfo /* 335 */
.quad sys_perf_event_open
.quad compat_sys_recvmmsg
+ .quad sys_fanotify_init
ia32_syscall_end:
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index beb9b5f8f8a41..981c7e7ad8040 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -343,10 +343,11 @@
#define __NR_rt_tgsigqueueinfo 335
#define __NR_perf_event_open 336
#define __NR_recvmmsg 337
+#define __NR_fanotify_init 338
#ifdef __KERNEL__
-#define NR_syscalls 338
+#define NR_syscalls 339
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index ff4307b0e81e1..4f23e04bdb345 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -663,6 +663,8 @@ __SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
#define __NR_recvmmsg 299
__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
+#define __NR_fanotify_init 300
+__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 8b3729341216c..e38793b50e1d7 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -337,3 +337,4 @@ ENTRY(sys_call_table)
.long sys_rt_tgsigqueueinfo /* 335 */
.long sys_perf_event_open
.long sys_recvmmsg
+ .long sys_fanotify_init
diff --git a/fs/notify/fanotify/Makefile b/fs/notify/fanotify/Makefile
index e7d39c05b0fee..0999213e7e6e6 100644
--- a/fs/notify/fanotify/Makefile
+++ b/fs/notify/fanotify/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_FANOTIFY) += fanotify.o
+obj-$(CONFIG_FANOTIFY) += fanotify.o fanotify_user.o
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
new file mode 100644
index 0000000000000..cf176fc7086b5
--- /dev/null
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -0,0 +1,13 @@
+#include <linux/fcntl.h>
+#include <linux/fs.h>
+#include <linux/fsnotify_backend.h>
+#include <linux/security.h>
+#include <linux/syscalls.h>
+
+#include "fanotify.h"
+
+SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
+ unsigned int, priority)
+{
+ return -ENOSYS;
+}
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 13ebb5413a798..198dcc9bd025c 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -813,6 +813,8 @@ asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,
asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
struct timespec __user *, const sigset_t __user *,
size_t);
+asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags,
+ unsigned int priority);
int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 70f2ea758ffec..2c4adc2decc38 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -181,3 +181,6 @@ cond_syscall(sys_eventfd2);
/* performance counters: */
cond_syscall(sys_perf_event_open);
+
+/* fanotify! */
+cond_syscall(sys_fanotify_init);
--
GitLab
From 52c923dd079df49f58016a9e56df184b132611d6 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:26 -0500
Subject: [PATCH 098/863] fanotify: fanotify_init syscall implementation
NAME
fanotify_init - initialize an fanotify group
SYNOPSIS
int fanotify_init(unsigned int flags, unsigned int event_f_flags, int priority);
DESCRIPTION
fanotify_init() initializes a new fanotify instance and returns a file
descriptor associated with the new fanotify event queue.
The following values can be OR'd into the flags field:
FAN_NONBLOCK Set the O_NONBLOCK file status flag on the new open file description.
Using this flag saves extra calls to fcntl(2) to achieve the same
result.
FAN_CLOEXEC Set the close-on-exec (FD_CLOEXEC) flag on the new file descriptor.
See the description of the O_CLOEXEC flag in open(2) for reasons why
this may be useful.
The event_f_flags argument is unused and must be set to 0
The priority argument is unused and must be set to 0
RETURN VALUE
On success, this system call return a new file descriptor. On error, -1 is
returned, and errno is set to indicate the error.
ERRORS
EINVAL An invalid value was specified in flags.
EINVAL A non-zero valid was passed in event_f_flags or in priority
ENFILE The system limit on the total number of file descriptors has been reached.
ENOMEM Insufficient kernel memory is available.
CONFORMING TO
These system calls are Linux-specific.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.h | 2 +
fs/notify/fanotify/fanotify_user.c | 61 +++++++++++++++++++++++++++++-
include/linux/fanotify.h | 4 ++
3 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/fs/notify/fanotify/fanotify.h b/fs/notify/fanotify/fanotify.h
index 50765eb30fe4b..dd656cfab1ba2 100644
--- a/fs/notify/fanotify/fanotify.h
+++ b/fs/notify/fanotify/fanotify.h
@@ -4,6 +4,8 @@
#include <linux/kernel.h>
#include <linux/types.h>
+extern const struct fsnotify_ops fanotify_fsnotify_ops;
+
static inline bool fanotify_mask_valid(__u32 mask)
{
if (mask & ~((__u32)FAN_ALL_INCOMING_EVENTS))
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index cf176fc7086b5..67c0b5e4a4886 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -1,13 +1,72 @@
#include <linux/fcntl.h>
#include <linux/fs.h>
+#include <linux/anon_inodes.h>
#include <linux/fsnotify_backend.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include "fanotify.h"
+static int fanotify_release(struct inode *ignored, struct file *file)
+{
+ struct fsnotify_group *group = file->private_data;
+
+ pr_debug("%s: file=%p group=%p\n", __func__, file, group);
+
+ /* matches the fanotify_init->fsnotify_alloc_group */
+ fsnotify_put_group(group);
+
+ return 0;
+}
+
+static const struct file_operations fanotify_fops = {
+ .poll = NULL,
+ .read = NULL,
+ .fasync = NULL,
+ .release = fanotify_release,
+ .unlocked_ioctl = NULL,
+ .compat_ioctl = NULL,
+};
+
+/* fanotify syscalls */
SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
unsigned int, priority)
{
- return -ENOSYS;
+ struct fsnotify_group *group;
+ int f_flags, fd;
+
+ pr_debug("%s: flags=%d event_f_flags=%d priority=%d\n",
+ __func__, flags, event_f_flags, priority);
+
+ if (event_f_flags)
+ return -EINVAL;
+ if (priority)
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (flags & ~FAN_ALL_INIT_FLAGS)
+ return -EINVAL;
+
+ f_flags = (O_RDONLY | FMODE_NONOTIFY);
+ if (flags & FAN_CLOEXEC)
+ f_flags |= O_CLOEXEC;
+ if (flags & FAN_NONBLOCK)
+ f_flags |= O_NONBLOCK;
+
+ /* fsnotify_alloc_group takes a ref. Dropped in fanotify_release */
+ group = fsnotify_alloc_group(&fanotify_fsnotify_ops);
+ if (IS_ERR(group))
+ return PTR_ERR(group);
+
+ fd = anon_inode_getfd("[fanotify]", &fanotify_fops, group, f_flags);
+ if (fd < 0)
+ goto out_put_group;
+
+ return fd;
+
+out_put_group:
+ fsnotify_put_group(group);
+ return fd;
}
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index b560f86d1401e..00bc6d4fbb58b 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -18,6 +18,10 @@
/* helper events */
#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+#define FAN_CLOEXEC 0x00000001
+#define FAN_NONBLOCK 0x00000002
+
+#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK)
/*
* All of the events - we build the list by hand so that we can add flags in
* the future and not break backward compatibility. Apps will get only the
--
GitLab
From bbaa4168b2d2d8cc674e6d35806e8426aef464b8 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:26 -0500
Subject: [PATCH 099/863] fanotify: sys_fanotify_mark declartion
This patch simply declares the new sys_fanotify_mark syscall
int fanotify_mark(int fanotify_fd, unsigned int flags, u64_mask,
int dfd const char *pathname)
Signed-off-by: Eric Paris <eparis@redhat.com>
---
arch/x86/ia32/ia32entry.S | 1 +
arch/x86/ia32/sys_ia32.c | 9 +++++++++
arch/x86/include/asm/sys_ia32.h | 3 +++
arch/x86/include/asm/unistd_32.h | 3 ++-
arch/x86/include/asm/unistd_64.h | 2 ++
arch/x86/kernel/syscall_table_32.S | 1 +
fs/notify/fanotify/fanotify_user.c | 6 ++++++
include/linux/syscalls.h | 3 +++
kernel/sys_ni.c | 1 +
9 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 586cb3be2e323..17cf65c948048 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -843,4 +843,5 @@ ia32_sys_call_table:
.quad sys_perf_event_open
.quad compat_sys_recvmmsg
.quad sys_fanotify_init
+ .quad sys32_fanotify_mark
ia32_syscall_end:
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 626be156d88de..3d093311d5e23 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -546,3 +546,12 @@ asmlinkage long sys32_fallocate(int fd, int mode, unsigned offset_lo,
return sys_fallocate(fd, mode, ((u64)offset_hi << 32) | offset_lo,
((u64)len_hi << 32) | len_lo);
}
+
+asmlinkage long sys32_fanotify_mark(int fanotify_fd, unsigned int flags,
+ u32 mask_lo, u32 mask_hi,
+ int fd, const char __user *pathname)
+{
+ return sys_fanotify_mark(fanotify_fd, flags,
+ ((u64)mask_hi << 32) | mask_lo,
+ fd, pathname);
+}
diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h
index 3ad421784ae7a..cf4e2e381cbab 100644
--- a/arch/x86/include/asm/sys_ia32.h
+++ b/arch/x86/include/asm/sys_ia32.h
@@ -80,4 +80,7 @@ asmlinkage long sys32_rt_sigreturn(struct pt_regs *);
/* ia32/ipc32.c */
asmlinkage long sys32_ipc(u32, int, int, int, compat_uptr_t, u32);
+
+asmlinkage long sys32_fanotify_mark(int, unsigned int, u32, u32, int,
+ const char __user *);
#endif /* _ASM_X86_SYS_IA32_H */
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 981c7e7ad8040..80b799cd74f7a 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -344,10 +344,11 @@
#define __NR_perf_event_open 336
#define __NR_recvmmsg 337
#define __NR_fanotify_init 338
+#define __NR_fanotify_mark 339
#ifdef __KERNEL__
-#define NR_syscalls 339
+#define NR_syscalls 340
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 4f23e04bdb345..5b7b1d5856167 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -665,6 +665,8 @@ __SYSCALL(__NR_perf_event_open, sys_perf_event_open)
__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
#define __NR_fanotify_init 300
__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
+#define __NR_fanotify_mark 301
+__SYSCALL(__NR_fanotify_mark, sys_fanotify_mark)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index e38793b50e1d7..07ad5eb7cc5c5 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -338,3 +338,4 @@ ENTRY(sys_call_table)
.long sys_perf_event_open
.long sys_recvmmsg
.long sys_fanotify_init
+ .long sys_fanotify_mark
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 67c0b5e4a4886..55d6e379f2b6f 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -70,3 +70,9 @@ SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
fsnotify_put_group(group);
return fd;
}
+
+SYSCALL_DEFINE5(fanotify_mark, int, fanotify_fd, unsigned int, flags,
+ __u64, mask, int, dfd, const char __user *, pathname)
+{
+ return -ENOSYS;
+}
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 198dcc9bd025c..5b05c37059e9b 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -815,6 +815,9 @@ asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
size_t);
asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags,
unsigned int priority);
+asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags,
+ u64 mask, int fd,
+ const char __user *pathname);
int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 2c4adc2decc38..bad369ec54036 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -184,3 +184,4 @@ cond_syscall(sys_perf_event_open);
/* fanotify! */
cond_syscall(sys_fanotify_init);
+cond_syscall(sys_fanotify_mark);
--
GitLab
From 2a3edf86040a7e15684525a2aadc29f532c51325 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:26 -0500
Subject: [PATCH 100/863] fanotify: fanotify_mark syscall implementation
NAME
fanotify_mark - add, remove, or modify an fanotify mark on a
filesystem object
SYNOPSIS
int fanotify_mark(int fanotify_fd, unsigned int flags, u64 mask,
int dfd, const char *pathname)
DESCRIPTION
fanotify_mark() is used to add remove or modify a mark on a filesystem
object. Marks are used to indicate that the fanotify group is
interested in events which occur on that object. At this point in
time marks may only be added to files and directories.
fanotify_fd must be a file descriptor returned by fanotify_init()
The flags field must contain exactly one of the following:
FAN_MARK_ADD - or the bits in mask and ignored mask into the mark
FAN_MARK_REMOVE - bitwise remove the bits in mask and ignored mark
from the mark
The following values can be OR'd into the flags field:
FAN_MARK_DONT_FOLLOW - same meaning as O_NOFOLLOW as described in open(2)
FAN_MARK_ONLYDIR - same meaning as O_DIRECTORY as described in open(2)
dfd may be any of the following:
AT_FDCWD: the object will be lookup up based on pathname similar
to open(2)
file descriptor of a directory: if pathname is not NULL the
object to modify will be lookup up similar to openat(2)
file descriptor of the final object: if pathname is NULL the
object to modify will be the object referenced by dfd
The mask is the bitwise OR of the set of events of interest such as:
FAN_ACCESS - object was accessed (read)
FAN_MODIFY - object was modified (write)
FAN_CLOSE_WRITE - object was writable and was closed
FAN_CLOSE_NOWRITE - object was read only and was closed
FAN_OPEN - object was opened
FAN_EVENT_ON_CHILD - interested in objected that happen to
children. Only relavent when the object
is a directory
FAN_Q_OVERFLOW - event queue overflowed (not implemented)
RETURN VALUE
On success, this system call returns 0. On error, -1 is
returned, and errno is set to indicate the error.
ERRORS
EINVAL An invalid value was specified in flags.
EINVAL An invalid value was specified in mask.
EINVAL An invalid value was specified in ignored_mask.
EINVAL fanotify_fd is not a file descriptor as returned by
fanotify_init()
EBADF fanotify_fd is not a valid file descriptor
EBADF dfd is not a valid file descriptor and path is NULL.
ENOTDIR dfd is not a directory and path is not NULL
EACCESS no search permissions on some part of the path
ENENT file not found
ENOMEM Insufficient kernel memory is available.
CONFORMING TO
These system calls are Linux-specific.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.h | 18 +++
fs/notify/fanotify/fanotify_user.c | 239 ++++++++++++++++++++++++++++-
include/linux/fanotify.h | 13 ++
3 files changed, 269 insertions(+), 1 deletion(-)
diff --git a/fs/notify/fanotify/fanotify.h b/fs/notify/fanotify/fanotify.h
index dd656cfab1ba2..59c3331a0e81a 100644
--- a/fs/notify/fanotify/fanotify.h
+++ b/fs/notify/fanotify/fanotify.h
@@ -6,6 +6,24 @@
extern const struct fsnotify_ops fanotify_fsnotify_ops;
+static inline bool fanotify_mark_flags_valid(unsigned int flags)
+{
+ /* must be either and add or a remove */
+ if (!(flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)))
+ return false;
+
+ /* cannot be both add and remove */
+ if ((flags & FAN_MARK_ADD) &&
+ (flags & FAN_MARK_REMOVE))
+ return false;
+
+ /* cannot have more flags than we know about */
+ if (flags & ~FAN_ALL_MARK_FLAGS)
+ return false;
+
+ return true;
+}
+
static inline bool fanotify_mask_valid(__u32 mask)
{
if (mask & ~((__u32)FAN_ALL_INCOMING_EVENTS))
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 55d6e379f2b6f..bc4fa48157f15 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -1,12 +1,18 @@
#include <linux/fcntl.h>
+#include <linux/file.h>
#include <linux/fs.h>
#include <linux/anon_inodes.h>
#include <linux/fsnotify_backend.h>
+#include <linux/init.h>
+#include <linux/namei.h>
#include <linux/security.h>
#include <linux/syscalls.h>
+#include <linux/types.h>
#include "fanotify.h"
+static struct kmem_cache *fanotify_mark_cache __read_mostly;
+
static int fanotify_release(struct inode *ignored, struct file *file)
{
struct fsnotify_group *group = file->private_data;
@@ -28,6 +34,185 @@ static const struct file_operations fanotify_fops = {
.compat_ioctl = NULL,
};
+static void fanotify_free_mark(struct fsnotify_mark *fsn_mark)
+{
+ kmem_cache_free(fanotify_mark_cache, fsn_mark);
+}
+
+static int fanotify_find_path(int dfd, const char __user *filename,
+ struct path *path, unsigned int flags)
+{
+ int ret;
+
+ pr_debug("%s: dfd=%d filename=%p flags=%x\n", __func__,
+ dfd, filename, flags);
+
+ if (filename == NULL) {
+ struct file *file;
+ int fput_needed;
+
+ ret = -EBADF;
+ file = fget_light(dfd, &fput_needed);
+ if (!file)
+ goto out;
+
+ ret = -ENOTDIR;
+ if ((flags & FAN_MARK_ONLYDIR) &&
+ !(S_ISDIR(file->f_path.dentry->d_inode->i_mode))) {
+ fput_light(file, fput_needed);
+ goto out;
+ }
+
+ *path = file->f_path;
+ path_get(path);
+ fput_light(file, fput_needed);
+ } else {
+ unsigned int lookup_flags = 0;
+
+ if (!(flags & FAN_MARK_DONT_FOLLOW))
+ lookup_flags |= LOOKUP_FOLLOW;
+ if (flags & FAN_MARK_ONLYDIR)
+ lookup_flags |= LOOKUP_DIRECTORY;
+
+ ret = user_path_at(dfd, filename, lookup_flags, path);
+ if (ret)
+ goto out;
+ }
+
+ /* you can only watch an inode if you have read permissions on it */
+ ret = inode_permission(path->dentry->d_inode, MAY_READ);
+ if (ret)
+ path_put(path);
+out:
+ return ret;
+}
+
+static int fanotify_remove_mark(struct fsnotify_group *group,
+ struct inode *inode,
+ __u32 mask)
+{
+ struct fsnotify_mark *fsn_mark;
+ __u32 new_mask;
+
+ pr_debug("%s: group=%p inode=%p mask=%x\n", __func__,
+ group, inode, mask);
+
+ fsn_mark = fsnotify_find_mark(group, inode);
+ if (!fsn_mark)
+ return -ENOENT;
+
+ spin_lock(&fsn_mark->lock);
+ fsn_mark->mask &= ~mask;
+ new_mask = fsn_mark->mask;
+ spin_unlock(&fsn_mark->lock);
+
+ if (!new_mask)
+ fsnotify_destroy_mark(fsn_mark);
+ else
+ fsnotify_recalc_inode_mask(inode);
+
+ fsnotify_recalc_group_mask(group);
+
+ /* matches the fsnotify_find_mark() */
+ fsnotify_put_mark(fsn_mark);
+
+ return 0;
+}
+
+static int fanotify_add_mark(struct fsnotify_group *group,
+ struct inode *inode,
+ __u32 mask)
+{
+ struct fsnotify_mark *fsn_mark;
+ __u32 old_mask, new_mask;
+ int ret;
+
+ pr_debug("%s: group=%p inode=%p mask=%x\n", __func__,
+ group, inode, mask);
+
+ fsn_mark = fsnotify_find_mark(group, inode);
+ if (!fsn_mark) {
+ struct fsnotify_mark *new_fsn_mark;
+
+ ret = -ENOMEM;
+ new_fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
+ if (!new_fsn_mark)
+ goto out;
+
+ fsnotify_init_mark(new_fsn_mark, fanotify_free_mark);
+ ret = fsnotify_add_mark(new_fsn_mark, group, inode, 0);
+ if (ret) {
+ fanotify_free_mark(new_fsn_mark);
+ goto out;
+ }
+
+ fsn_mark = new_fsn_mark;
+ }
+
+ ret = 0;
+
+ spin_lock(&fsn_mark->lock);
+ old_mask = fsn_mark->mask;
+ fsn_mark->mask |= mask;
+ new_mask = fsn_mark->mask;
+ spin_unlock(&fsn_mark->lock);
+
+ /* we made changes to a mask, update the group mask and the inode mask
+ * so things happen quickly. */
+ if (old_mask != new_mask) {
+ /* more bits in old than in new? */
+ int dropped = (old_mask & ~new_mask);
+ /* more bits in this mark than the inode's mask? */
+ int do_inode = (new_mask & ~inode->i_fsnotify_mask);
+ /* more bits in this mark than the group? */
+ int do_group = (new_mask & ~group->mask);
+
+ /* update the inode with this new mark */
+ if (dropped || do_inode)
+ fsnotify_recalc_inode_mask(inode);
+
+ /* update the group mask with the new mask */
+ if (dropped || do_group)
+ fsnotify_recalc_group_mask(group);
+ }
+
+ /* match the init or the find.... */
+ fsnotify_put_mark(fsn_mark);
+out:
+ return ret;
+}
+
+static int fanotify_update_mark(struct fsnotify_group *group,
+ struct inode *inode, int flags,
+ __u32 mask)
+{
+ pr_debug("%s: group=%p inode=%p flags=%x mask=%x\n", __func__,
+ group, inode, flags, mask);
+
+ if (flags & FAN_MARK_ADD)
+ fanotify_add_mark(group, inode, mask);
+ else if (flags & FAN_MARK_REMOVE)
+ fanotify_remove_mark(group, inode, mask);
+ else
+ BUG();
+
+ return 0;
+}
+
+static bool fanotify_mark_validate_input(int flags,
+ __u32 mask)
+{
+ pr_debug("%s: flags=%x mask=%x\n", __func__, flags, mask);
+
+ /* are flags valid of this operation? */
+ if (!fanotify_mark_flags_valid(flags))
+ return false;
+ /* is the mask valid? */
+ if (!fanotify_mask_valid(mask))
+ return false;
+ return true;
+}
+
/* fanotify syscalls */
SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
unsigned int, priority)
@@ -74,5 +259,57 @@ SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
SYSCALL_DEFINE5(fanotify_mark, int, fanotify_fd, unsigned int, flags,
__u64, mask, int, dfd, const char __user *, pathname)
{
- return -ENOSYS;
+ struct inode *inode;
+ struct fsnotify_group *group;
+ struct file *filp;
+ struct path path;
+ int ret, fput_needed;
+
+ pr_debug("%s: fanotify_fd=%d flags=%x dfd=%d pathname=%p mask=%llx\n",
+ __func__, fanotify_fd, flags, dfd, pathname, mask);
+
+ /* we only use the lower 32 bits as of right now. */
+ if (mask & ((__u64)0xffffffff << 32))
+ return -EINVAL;
+
+ if (!fanotify_mark_validate_input(flags, mask))
+ return -EINVAL;
+
+ filp = fget_light(fanotify_fd, &fput_needed);
+ if (unlikely(!filp))
+ return -EBADF;
+
+ /* verify that this is indeed an fanotify instance */
+ ret = -EINVAL;
+ if (unlikely(filp->f_op != &fanotify_fops))
+ goto fput_and_out;
+
+ ret = fanotify_find_path(dfd, pathname, &path, flags);
+ if (ret)
+ goto fput_and_out;
+
+ /* inode held in place by reference to path; group by fget on fd */
+ inode = path.dentry->d_inode;
+ group = filp->private_data;
+
+ /* create/update an inode mark */
+ ret = fanotify_update_mark(group, inode, flags, mask);
+
+ path_put(&path);
+fput_and_out:
+ fput_light(filp, fput_needed);
+ return ret;
+}
+
+/*
+ * fanotify_user_setup - Our initialization function. Note that we cannnot return
+ * error because we have compiled-in VFS hooks. So an (unlikely) failure here
+ * must result in panic().
+ */
+static int __init fanotify_user_setup(void)
+{
+ fanotify_mark_cache = KMEM_CACHE(fsnotify_mark, SLAB_PANIC);
+
+ return 0;
}
+device_initcall(fanotify_user_setup);
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 00bc6d4fbb58b..95aeea2a3ca62 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -18,10 +18,23 @@
/* helper events */
#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+/* flags used for fanotify_init() */
#define FAN_CLOEXEC 0x00000001
#define FAN_NONBLOCK 0x00000002
#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK)
+
+/* flags used for fanotify_modify_mark() */
+#define FAN_MARK_ADD 0x00000001
+#define FAN_MARK_REMOVE 0x00000002
+#define FAN_MARK_DONT_FOLLOW 0x00000004
+#define FAN_MARK_ONLYDIR 0x00000008
+
+#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
+ FAN_MARK_REMOVE |\
+ FAN_MARK_DONT_FOLLOW |\
+ FAN_MARK_ONLYDIR)
+
/*
* All of the events - we build the list by hand so that we can add flags in
* the future and not break backward compatibility. Apps will get only the
--
GitLab
From a1014f102322398e67524b68b3300acf384e6c1f Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:26 -0500
Subject: [PATCH 101/863] fanotify: send events using read
Send events to userspace by reading the file descriptor from fanotify_init().
One will get blocks of data which look like:
struct fanotify_event_metadata {
__u32 event_len;
__u32 vers;
__s32 fd;
__u64 mask;
__s64 pid;
__u64 cookie;
} __attribute__ ((packed));
Simple code to retrieve and deal with events is below
while ((len = read(fan_fd, buf, sizeof(buf))) > 0) {
struct fanotify_event_metadata *metadata;
metadata = (void *)buf;
while(FAN_EVENT_OK(metadata, len)) {
[PROCESS HERE!!]
if (metadata->fd >= 0 && close(metadata->fd) != 0)
goto fail;
metadata = FAN_EVENT_NEXT(metadata, len);
}
}
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.h | 5 +
fs/notify/fanotify/fanotify_user.c | 220 ++++++++++++++++++++++++++++-
include/linux/fanotify.h | 24 ++++
3 files changed, 245 insertions(+), 4 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.h b/fs/notify/fanotify/fanotify.h
index 59c3331a0e81a..5608783c6bca6 100644
--- a/fs/notify/fanotify/fanotify.h
+++ b/fs/notify/fanotify/fanotify.h
@@ -30,3 +30,8 @@ static inline bool fanotify_mask_valid(__u32 mask)
return false;
return true;
}
+
+static inline __u32 fanotify_outgoing_mask(__u32 mask)
+{
+ return mask & FAN_ALL_OUTGOING_EVENTS;
+}
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index bc4fa48157f15..a99550f83f8af 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -4,15 +4,202 @@
#include <linux/anon_inodes.h>
#include <linux/fsnotify_backend.h>
#include <linux/init.h>
+#include <linux/mount.h>
#include <linux/namei.h>
+#include <linux/poll.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#include <asm/ioctls.h>
#include "fanotify.h"
static struct kmem_cache *fanotify_mark_cache __read_mostly;
+/*
+ * Get an fsnotify notification event if one exists and is small
+ * enough to fit in "count". Return an error pointer if the count
+ * is not large enough.
+ *
+ * Called with the group->notification_mutex held.
+ */
+static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
+ size_t count)
+{
+ BUG_ON(!mutex_is_locked(&group->notification_mutex));
+
+ pr_debug("%s: group=%p count=%zd\n", __func__, group, count);
+
+ if (fsnotify_notify_queue_is_empty(group))
+ return NULL;
+
+ if (FAN_EVENT_METADATA_LEN > count)
+ return ERR_PTR(-EINVAL);
+
+ /* held the notification_mutex the whole time, so this is the
+ * same event we peeked above */
+ return fsnotify_remove_notify_event(group);
+}
+
+static int create_and_fill_fd(struct fsnotify_group *group,
+ struct fanotify_event_metadata *metadata,
+ struct fsnotify_event *event)
+{
+ int client_fd;
+ struct dentry *dentry;
+ struct vfsmount *mnt;
+ struct file *new_file;
+
+ pr_debug("%s: group=%p metadata=%p event=%p\n", __func__, group,
+ metadata, event);
+
+ client_fd = get_unused_fd();
+ if (client_fd < 0)
+ return client_fd;
+
+ if (event->data_type != FSNOTIFY_EVENT_PATH) {
+ WARN_ON(1);
+ put_unused_fd(client_fd);
+ return -EINVAL;
+ }
+
+ /*
+ * we need a new file handle for the userspace program so it can read even if it was
+ * originally opened O_WRONLY.
+ */
+ dentry = dget(event->path.dentry);
+ mnt = mntget(event->path.mnt);
+ /* it's possible this event was an overflow event. in that case dentry and mnt
+ * are NULL; That's fine, just don't call dentry open */
+ if (dentry && mnt)
+ new_file = dentry_open(dentry, mnt,
+ O_RDONLY | O_LARGEFILE | FMODE_NONOTIFY,
+ current_cred());
+ else
+ new_file = ERR_PTR(-EOVERFLOW);
+ if (IS_ERR(new_file)) {
+ /*
+ * we still send an event even if we can't open the file. this
+ * can happen when say tasks are gone and we try to open their
+ * /proc files or we try to open a WRONLY file like in sysfs
+ * we just send the errno to userspace since there isn't much
+ * else we can do.
+ */
+ put_unused_fd(client_fd);
+ client_fd = PTR_ERR(new_file);
+ } else {
+ fd_install(client_fd, new_file);
+ }
+
+ metadata->fd = client_fd;
+
+ return 0;
+}
+
+static ssize_t fill_event_metadata(struct fsnotify_group *group,
+ struct fanotify_event_metadata *metadata,
+ struct fsnotify_event *event)
+{
+ pr_debug("%s: group=%p metadata=%p event=%p\n", __func__,
+ group, metadata, event);
+
+ metadata->event_len = FAN_EVENT_METADATA_LEN;
+ metadata->vers = FANOTIFY_METADATA_VERSION;
+ metadata->mask = fanotify_outgoing_mask(event->mask);
+
+ return create_and_fill_fd(group, metadata, event);
+
+}
+
+static ssize_t copy_event_to_user(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ char __user *buf)
+{
+ struct fanotify_event_metadata fanotify_event_metadata;
+ int ret;
+
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
+ ret = fill_event_metadata(group, &fanotify_event_metadata, event);
+ if (ret)
+ return ret;
+
+ if (copy_to_user(buf, &fanotify_event_metadata, FAN_EVENT_METADATA_LEN))
+ return -EFAULT;
+
+ return FAN_EVENT_METADATA_LEN;
+}
+
+/* intofiy userspace file descriptor functions */
+static unsigned int fanotify_poll(struct file *file, poll_table *wait)
+{
+ struct fsnotify_group *group = file->private_data;
+ int ret = 0;
+
+ poll_wait(file, &group->notification_waitq, wait);
+ mutex_lock(&group->notification_mutex);
+ if (!fsnotify_notify_queue_is_empty(group))
+ ret = POLLIN | POLLRDNORM;
+ mutex_unlock(&group->notification_mutex);
+
+ return ret;
+}
+
+static ssize_t fanotify_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ struct fsnotify_group *group;
+ struct fsnotify_event *kevent;
+ char __user *start;
+ int ret;
+ DEFINE_WAIT(wait);
+
+ start = buf;
+ group = file->private_data;
+
+ pr_debug("%s: group=%p\n", __func__, group);
+
+ while (1) {
+ prepare_to_wait(&group->notification_waitq, &wait, TASK_INTERRUPTIBLE);
+
+ mutex_lock(&group->notification_mutex);
+ kevent = get_one_event(group, count);
+ mutex_unlock(&group->notification_mutex);
+
+ if (kevent) {
+ ret = PTR_ERR(kevent);
+ if (IS_ERR(kevent))
+ break;
+ ret = copy_event_to_user(group, kevent, buf);
+ fsnotify_put_event(kevent);
+ if (ret < 0)
+ break;
+ buf += ret;
+ count -= ret;
+ continue;
+ }
+
+ ret = -EAGAIN;
+ if (file->f_flags & O_NONBLOCK)
+ break;
+ ret = -EINTR;
+ if (signal_pending(current))
+ break;
+
+ if (start != buf)
+ break;
+
+ schedule();
+ }
+
+ finish_wait(&group->notification_waitq, &wait);
+ if (start != buf && ret != -EFAULT)
+ ret = buf - start;
+ return ret;
+}
+
static int fanotify_release(struct inode *ignored, struct file *file)
{
struct fsnotify_group *group = file->private_data;
@@ -25,13 +212,38 @@ static int fanotify_release(struct inode *ignored, struct file *file)
return 0;
}
+static long fanotify_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct fsnotify_group *group;
+ struct fsnotify_event_holder *holder;
+ void __user *p;
+ int ret = -ENOTTY;
+ size_t send_len = 0;
+
+ group = file->private_data;
+
+ p = (void __user *) arg;
+
+ switch (cmd) {
+ case FIONREAD:
+ mutex_lock(&group->notification_mutex);
+ list_for_each_entry(holder, &group->notification_list, event_list)
+ send_len += FAN_EVENT_METADATA_LEN;
+ mutex_unlock(&group->notification_mutex);
+ ret = put_user(send_len, (int __user *) p);
+ break;
+ }
+
+ return ret;
+}
+
static const struct file_operations fanotify_fops = {
- .poll = NULL,
- .read = NULL,
+ .poll = fanotify_poll,
+ .read = fanotify_read,
.fasync = NULL,
.release = fanotify_release,
- .unlocked_ioctl = NULL,
- .compat_ioctl = NULL,
+ .unlocked_ioctl = fanotify_ioctl,
+ .compat_ioctl = fanotify_ioctl,
};
static void fanotify_free_mark(struct fsnotify_mark *fsn_mark)
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 95aeea2a3ca62..c1c66162a46ce 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -51,6 +51,30 @@
*/
#define FAN_ALL_INCOMING_EVENTS (FAN_ALL_EVENTS |\
FAN_EVENT_ON_CHILD)
+
+#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\
+ FAN_Q_OVERFLOW)
+
+#define FANOTIFY_METADATA_VERSION 1
+
+struct fanotify_event_metadata {
+ __u32 event_len;
+ __u32 vers;
+ __s32 fd;
+ __u64 mask;
+} __attribute__ ((packed));
+
+/* Helper functions to deal with fanotify_event_metadata buffers */
+#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
+
+#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
+ (struct fanotify_event_metadata*)(((char *)(meta)) + \
+ (meta)->event_len))
+
+#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
+ (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
+ (long)(meta)->event_len <= (long)(len))
+
#ifdef __KERNEL__
#endif /* __KERNEL__ */
--
GitLab
From ef601a9cfd21fe9ce57e0ee3f4a31552ffb96366 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 17 Dec 2009 21:24:26 -0500
Subject: [PATCH 102/863] fanotify: select ANON_INODES.
fanotify references anon_inode_getfd(), which is only available with
ANON_INODES enabled. Presently this bails out with the following:
LD vmlinux
fs/built-in.o: In function `sys_fanotify_init':
(.text+0x26d1c): undefined reference to `anon_inode_getfd'
make: *** [vmlinux] Error 1
which is trivially corrected by adding an ANON_INODES select.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/notify/fanotify/Kconfig b/fs/notify/fanotify/Kconfig
index f9d7ae081f858..668e5df28e28b 100644
--- a/fs/notify/fanotify/Kconfig
+++ b/fs/notify/fanotify/Kconfig
@@ -1,6 +1,7 @@
config FANOTIFY
bool "Filesystem wide access notification"
select FSNOTIFY
+ select ANON_INODES
default y
---help---
Say Y here to enable fanotify suport. fanotify is a file access
--
GitLab
From 9bbfc964b89009d0cadcec7027afc92ee742e95e Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 17 Dec 2009 21:24:26 -0500
Subject: [PATCH 103/863] fanotify: CONFIG_HAVE_SYSCALL_WRAPPERS for
sys_fanotify_mark
Please note that you need the patch below in addition, otherwise the
syscall wrapper stuff won't work on those 32 bit architectures which enable
the wrappers.
When enabled the syscall wrapper defines always take long parameters and then
cast them to whatever is needed. This approach doesn't work for the 32 bit
case where the original syscall takes a long long parameter, since we would
lose the upper 32 bits.
So syscalls with 64 bit arguments are special cases wrt to syscall wrappers
and enp up in the ugliness below (see also sys_fallocate). In addition these
special cased syscall wrappers have the drawback that ftrace syscall tracing
doesn't work on them, since they don't get defined by using the usual macros.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index a99550f83f8af..a9ced3feb0bbc 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -468,8 +468,9 @@ SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
return fd;
}
-SYSCALL_DEFINE5(fanotify_mark, int, fanotify_fd, unsigned int, flags,
- __u64, mask, int, dfd, const char __user *, pathname)
+SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
+ __u64 mask, int dfd,
+ const char __user * pathname)
{
struct inode *inode;
struct fsnotify_group *group;
@@ -513,6 +514,17 @@ SYSCALL_DEFINE5(fanotify_mark, int, fanotify_fd, unsigned int, flags,
return ret;
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fanotify_mark(long fanotify_fd, long flags, __u64 mask,
+ long dfd, long pathname)
+{
+ return SYSC_fanotify_mark((int) fanotify_fd, (unsigned int) flags,
+ mask, (int) dfd,
+ (const char __user *) pathname);
+}
+SYSCALL_ALIAS(sys_fanotify_mark, SyS_fanotify_mark);
+#endif
+
/*
* fanotify_user_setup - Our initialization function. Note that we cannnot return
* error because we have compiled-in VFS hooks. So an (unlikely) failure here
--
GitLab
From 22aa425dec9e47051624714ae283eb2b6a473013 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:26 -0500
Subject: [PATCH 104/863] fanotify: create_fd cleanup
Code cleanup which does the fd creation work seperately from the userspace
metadata creation. It fits better with the other code.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index a9ced3feb0bbc..cf9c300098253 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -43,17 +43,14 @@ static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
return fsnotify_remove_notify_event(group);
}
-static int create_and_fill_fd(struct fsnotify_group *group,
- struct fanotify_event_metadata *metadata,
- struct fsnotify_event *event)
+static int create_fd(struct fsnotify_group *group, struct fsnotify_event *event)
{
int client_fd;
struct dentry *dentry;
struct vfsmount *mnt;
struct file *new_file;
- pr_debug("%s: group=%p metadata=%p event=%p\n", __func__, group,
- metadata, event);
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
client_fd = get_unused_fd();
if (client_fd < 0)
@@ -93,9 +90,7 @@ static int create_and_fill_fd(struct fsnotify_group *group,
fd_install(client_fd, new_file);
}
- metadata->fd = client_fd;
-
- return 0;
+ return client_fd;
}
static ssize_t fill_event_metadata(struct fsnotify_group *group,
@@ -108,9 +103,9 @@ static ssize_t fill_event_metadata(struct fsnotify_group *group,
metadata->event_len = FAN_EVENT_METADATA_LEN;
metadata->vers = FANOTIFY_METADATA_VERSION;
metadata->mask = fanotify_outgoing_mask(event->mask);
+ metadata->fd = create_fd(group, event);
- return create_and_fill_fd(group, metadata, event);
-
+ return metadata->fd;
}
static ssize_t copy_event_to_user(struct fsnotify_group *group,
@@ -123,7 +118,7 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
ret = fill_event_metadata(group, &fanotify_event_metadata, event);
- if (ret)
+ if (ret < 0)
return ret;
if (copy_to_user(buf, &fanotify_event_metadata, FAN_EVENT_METADATA_LEN))
--
GitLab
From 32c3263221bd63316815286dccacdc7abfd7f3c4 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:27 -0500
Subject: [PATCH 105/863] fanotify: Add pids to events
Pass the process identifiers of the triggering processes to fanotify
listeners: this information is useful for event filtering and logging.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 5 +++--
fs/notify/fanotify/fanotify_user.c | 1 +
fs/notify/notification.c | 3 +++
include/linux/fanotify.h | 1 +
include/linux/fsnotify_backend.h | 1 +
5 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 5b0b6b485a9cb..881067dc79237 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -10,8 +10,9 @@ static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
{
pr_debug("%s: old=%p new=%p\n", __func__, old, new);
- if ((old->to_tell == new->to_tell) &&
- (old->data_type == new->data_type)) {
+ if (old->to_tell == new->to_tell &&
+ old->data_type == new->data_type &&
+ old->tgid == new->tgid) {
switch (old->data_type) {
case (FSNOTIFY_EVENT_PATH):
if ((old->path.mnt == new->path.mnt) &&
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index cf9c300098253..66e38fc052b27 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -103,6 +103,7 @@ static ssize_t fill_event_metadata(struct fsnotify_group *group,
metadata->event_len = FAN_EVENT_METADATA_LEN;
metadata->vers = FANOTIFY_METADATA_VERSION;
metadata->mask = fanotify_outgoing_mask(event->mask);
+ metadata->pid = pid_vnr(event->tgid);
metadata->fd = create_fd(group, event);
return metadata->fd;
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 066f1f988bacc..7fc8d004084c3 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -93,6 +93,7 @@ void fsnotify_put_event(struct fsnotify_event *event)
BUG_ON(!list_empty(&event->private_data_list));
kfree(event->file_name);
+ put_pid(event->tgid);
kmem_cache_free(fsnotify_event_cachep, event);
}
}
@@ -346,6 +347,7 @@ struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event)
return NULL;
}
}
+ event->tgid = get_pid(old_event->tgid);
if (event->data_type == FSNOTIFY_EVENT_PATH)
path_get(&event->path);
@@ -385,6 +387,7 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
event->name_len = strlen(event->file_name);
}
+ event->tgid = get_pid(task_tgid(current));
event->sync_cookie = cookie;
event->to_tell = to_tell;
event->data_type = data_type;
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index c1c66162a46ce..5f633af4d1b0d 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -62,6 +62,7 @@ struct fanotify_event_metadata {
__u32 vers;
__s32 fd;
__u64 mask;
+ __s64 pid;
} __attribute__ ((packed));
/* Helper functions to deal with fanotify_event_metadata buffers */
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index ff654c1932f27..7d93572ec5687 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -221,6 +221,7 @@ struct fsnotify_event {
u32 sync_cookie; /* used to corrolate events, namely inotify mv events */
char *file_name;
size_t name_len;
+ struct pid *tgid;
struct list_head private_data_list; /* groups can store private data here */
};
--
GitLab
From 5444e2981c31d0ed7465475e451b8437084337e5 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:27 -0500
Subject: [PATCH 106/863] fsnotify: split generic and inode specific mark code
currently all marking is done by functions in inode-mark.c. Some of this
is pretty generic and should be instead done in a generic function and we
should only put the inode specific code in inode-mark.c
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/Makefile | 3 +-
fs/notify/dnotify/dnotify.c | 12 +-
fs/notify/fanotify/fanotify.c | 2 +-
fs/notify/fanotify/fanotify_user.c | 8 +-
fs/notify/fsnotify.h | 7 +
fs/notify/inode_mark.c | 246 ++--------------------
fs/notify/inotify/inotify_fsnotify.c | 4 +-
fs/notify/inotify/inotify_user.c | 4 +-
fs/notify/mark.c | 294 +++++++++++++++++++++++++++
include/linux/fsnotify_backend.h | 5 +-
kernel/audit_tree.c | 8 +-
kernel/audit_watch.c | 6 +-
12 files changed, 347 insertions(+), 252 deletions(-)
create mode 100644 fs/notify/mark.c
diff --git a/fs/notify/Makefile b/fs/notify/Makefile
index 396a387793718..8f7f3b024a2ea 100644
--- a/fs/notify/Makefile
+++ b/fs/notify/Makefile
@@ -1,4 +1,5 @@
-obj-$(CONFIG_FSNOTIFY) += fsnotify.o notification.o group.o inode_mark.o
+obj-$(CONFIG_FSNOTIFY) += fsnotify.o notification.o group.o inode_mark.o \
+ mark.o
obj-y += dnotify/
obj-y += inotify/
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index cac2eb896639f..69f42df9ba457 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -95,7 +95,7 @@ static int dnotify_handle_event(struct fsnotify_group *group,
to_tell = event->to_tell;
- fsn_mark = fsnotify_find_mark(group, to_tell);
+ fsn_mark = fsnotify_find_inode_mark(group, to_tell);
if (unlikely(!fsn_mark))
return 0;
dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
@@ -143,14 +143,14 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
if (!S_ISDIR(inode->i_mode))
return false;
- fsn_mark = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
return false;
mask = (mask & ~FS_EVENT_ON_CHILD);
send = (mask & fsn_mark->mask);
- fsnotify_put_mark(fsn_mark); /* matches fsnotify_find_mark */
+ fsnotify_put_mark(fsn_mark); /* matches fsnotify_find_inode_mark */
return send;
}
@@ -193,7 +193,7 @@ void dnotify_flush(struct file *filp, fl_owner_t id)
if (!S_ISDIR(inode->i_mode))
return;
- fsn_mark = fsnotify_find_mark(dnotify_group, inode);
+ fsn_mark = fsnotify_find_inode_mark(dnotify_group, inode);
if (!fsn_mark)
return;
dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
@@ -346,12 +346,12 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
mutex_lock(&dnotify_mark_mutex);
/* add the new_fsn_mark or find an old one. */
- fsn_mark = fsnotify_find_mark(dnotify_group, inode);
+ fsn_mark = fsnotify_find_inode_mark(dnotify_group, inode);
if (fsn_mark) {
dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
spin_lock(&fsn_mark->lock);
} else {
- fsnotify_add_mark(new_fsn_mark, dnotify_group, inode, 0);
+ fsnotify_add_mark(new_fsn_mark, dnotify_group, inode, NULL, 0);
spin_lock(&new_fsn_mark->lock);
fsn_mark = new_fsn_mark;
dn_mark = new_dn_mark;
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 881067dc79237..aa5e92661142f 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -118,7 +118,7 @@ static bool fanotify_should_send_event(struct fsnotify_group *group, struct inod
if (data_type != FSNOTIFY_EVENT_PATH)
return false;
- fsn_mark = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
return false;
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 66e38fc052b27..05351936a7257 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -305,7 +305,7 @@ static int fanotify_remove_mark(struct fsnotify_group *group,
pr_debug("%s: group=%p inode=%p mask=%x\n", __func__,
group, inode, mask);
- fsn_mark = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
return -ENOENT;
@@ -321,7 +321,7 @@ static int fanotify_remove_mark(struct fsnotify_group *group,
fsnotify_recalc_group_mask(group);
- /* matches the fsnotify_find_mark() */
+ /* matches the fsnotify_find_inode_mark() */
fsnotify_put_mark(fsn_mark);
return 0;
@@ -338,7 +338,7 @@ static int fanotify_add_mark(struct fsnotify_group *group,
pr_debug("%s: group=%p inode=%p mask=%x\n", __func__,
group, inode, mask);
- fsn_mark = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark) {
struct fsnotify_mark *new_fsn_mark;
@@ -348,7 +348,7 @@ static int fanotify_add_mark(struct fsnotify_group *group,
goto out;
fsnotify_init_mark(new_fsn_mark, fanotify_free_mark);
- ret = fsnotify_add_mark(new_fsn_mark, group, inode, 0);
+ ret = fsnotify_add_mark(new_fsn_mark, group, inode, NULL, 0);
if (ret) {
fanotify_free_mark(new_fsn_mark);
goto out;
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index 2ba59158969fd..7c7a904b802d6 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -20,6 +20,11 @@ extern __u32 fsnotify_vfsmount_mask;
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
+/* add a mark to an inode */
+extern int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct inode *inode,
+ int allow_dups);
+
/* add a group to the inode group list */
extern void fsnotify_add_inode_group(struct fsnotify_group *group);
/* add a group to the vfsmount group list */
@@ -27,6 +32,8 @@ extern void fsnotify_add_vfsmount_group(struct fsnotify_group *group);
/* final kfree of a group */
extern void fsnotify_final_destroy_group(struct fsnotify_group *group);
+/* inode specific destruction of a mark */
+extern void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark);
/* run the list of all marks associated with inode and flag them to be freed */
extern void fsnotify_clear_marks_by_inode(struct inode *inode);
/*
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index ba6f9833561bf..c925579ba0116 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -16,72 +16,6 @@
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/*
- * fsnotify inode mark locking/lifetime/and refcnting
- *
- * REFCNT:
- * The mark->refcnt tells how many "things" in the kernel currently are
- * referencing this object. The object typically will live inside the kernel
- * with a refcnt of 2, one for each list it is on (i_list, g_list). Any task
- * which can find this object holding the appropriete locks, can take a reference
- * and the object itself is guarenteed to survive until the reference is dropped.
- *
- * LOCKING:
- * There are 3 spinlocks involved with fsnotify inode marks and they MUST
- * be taken in order as follows:
- *
- * mark->lock
- * group->mark_lock
- * inode->i_lock
- *
- * mark->lock protects 2 things, mark->group and mark->inode. You must hold
- * that lock to dereference either of these things (they could be NULL even with
- * the lock)
- *
- * group->mark_lock protects the marks_list anchored inside a given group
- * and each mark is hooked via the g_list. It also sorta protects the
- * free_g_list, which when used is anchored by a private list on the stack of the
- * task which held the group->mark_lock.
- *
- * inode->i_lock protects the i_fsnotify_marks list anchored inside a
- * given inode and each mark is hooked via the i_list. (and sorta the
- * free_i_list)
- *
- *
- * LIFETIME:
- * Inode marks survive between when they are added to an inode and when their
- * refcnt==0.
- *
- * The inode mark can be cleared for a number of different reasons including:
- * - The inode is unlinked for the last time. (fsnotify_inode_remove)
- * - The inode is being evicted from cache. (fsnotify_inode_delete)
- * - The fs the inode is on is unmounted. (fsnotify_inode_delete/fsnotify_unmount_inodes)
- * - Something explicitly requests that it be removed. (fsnotify_destroy_mark)
- * - The fsnotify_group associated with the mark is going away and all such marks
- * need to be cleaned up. (fsnotify_clear_marks_by_group)
- *
- * Worst case we are given an inode and need to clean up all the marks on that
- * inode. We take i_lock and walk the i_fsnotify_marks safely. For each
- * mark on the list we take a reference (so the mark can't disappear under us).
- * We remove that mark form the inode's list of marks and we add this mark to a
- * private list anchored on the stack using i_free_list; At this point we no
- * longer fear anything finding the mark using the inode's list of marks.
- *
- * We can safely and locklessly run the private list on the stack of everything
- * we just unattached from the original inode. For each mark on the private list
- * we grab the mark-> and can thus dereference mark->group and mark->inode. If
- * we see the group and inode are not NULL we take those locks. Now holding all
- * 3 locks we can completely remove the mark from other tasks finding it in the
- * future. Remember, 10 things might already be referencing this mark, but they
- * better be holding a ref. We drop our reference we took before we unhooked it
- * from the inode. When the ref hits 0 we can free the mark.
- *
- * Very similarly for freeing by group, except we use free_g_list.
- *
- * This has the very interesting property of being able to run concurrently with
- * any (or all) other directions.
- */
-
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -95,17 +29,6 @@
#include <linux/fsnotify_backend.h>
#include "fsnotify.h"
-void fsnotify_get_mark(struct fsnotify_mark *mark)
-{
- atomic_inc(&mark->refcnt);
-}
-
-void fsnotify_put_mark(struct fsnotify_mark *mark)
-{
- if (atomic_dec_and_test(&mark->refcnt))
- mark->free_mark(mark);
-}
-
/*
* Recalculate the mask of events relevant to a given inode locked.
*/
@@ -135,44 +58,18 @@ void fsnotify_recalc_inode_mask(struct inode *inode)
__fsnotify_update_child_dentry_flags(inode);
}
-/*
- * Any time a mark is getting freed we end up here.
- * The caller had better be holding a reference to this mark so we don't actually
- * do the final put under the mark->lock
- */
-void fsnotify_destroy_mark(struct fsnotify_mark *mark)
+void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark)
{
- struct fsnotify_group *group;
- struct inode *inode;
-
- spin_lock(&mark->lock);
+ struct inode *inode = mark->i.inode;
- group = mark->group;
- inode = mark->i.inode;
+ assert_spin_locked(&mark->lock);
+ assert_spin_locked(&mark->group->mark_lock);
- BUG_ON(group && !inode);
- BUG_ON(!group && inode);
-
- /* if !group something else already marked this to die */
- if (!group) {
- spin_unlock(&mark->lock);
- return;
- }
-
- /* 1 from caller and 1 for being on i_list/g_list */
- BUG_ON(atomic_read(&mark->refcnt) < 2);
-
- spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
hlist_del_init(&mark->i.i_list);
mark->i.inode = NULL;
- list_del_init(&mark->g_list);
- mark->group = NULL;
-
- fsnotify_put_mark(mark); /* for i_list and g_list */
-
/*
* this mark is now off the inode->i_fsnotify_marks list and we
* hold the inode->i_lock, so this is the perfect time to update the
@@ -181,61 +78,6 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
fsnotify_recalc_inode_mask_locked(inode);
spin_unlock(&inode->i_lock);
- spin_unlock(&group->mark_lock);
- spin_unlock(&mark->lock);
-
- /*
- * Some groups like to know that marks are being freed. This is a
- * callback to the group function to let it know that this mark
- * is being freed.
- */
- if (group->ops->freeing_mark)
- group->ops->freeing_mark(mark, group);
-
- /*
- * __fsnotify_update_child_dentry_flags(inode);
- *
- * I really want to call that, but we can't, we have no idea if the inode
- * still exists the second we drop the mark->lock.
- *
- * The next time an event arrive to this inode from one of it's children
- * __fsnotify_parent will see that the inode doesn't care about it's
- * children and will update all of these flags then. So really this
- * is just a lazy update (and could be a perf win...)
- */
-
-
- iput(inode);
-
- /*
- * it's possible that this group tried to destroy itself, but this
- * this mark was simultaneously being freed by inode. If that's the
- * case, we finish freeing the group here.
- */
- if (unlikely(atomic_dec_and_test(&group->num_marks)))
- fsnotify_final_destroy_group(group);
-}
-
-/*
- * Given a group, destroy all of the marks associated with that group.
- */
-void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
-{
- struct fsnotify_mark *lmark, *mark;
- LIST_HEAD(free_list);
-
- spin_lock(&group->mark_lock);
- list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) {
- list_add(&mark->free_g_list, &free_list);
- list_del_init(&mark->g_list);
- fsnotify_get_mark(mark);
- }
- spin_unlock(&group->mark_lock);
-
- list_for_each_entry_safe(mark, lmark, &free_list, free_g_list) {
- fsnotify_destroy_mark(mark);
- fsnotify_put_mark(mark);
- }
}
/*
@@ -261,8 +103,12 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
}
}
-static struct fsnotify_mark *fsnotify_find_mark_locked(struct fsnotify_group *group,
- struct inode *inode)
+/*
+ * given a group and inode, find the mark associated with that combination.
+ * if found take a reference to that mark and return it, else return NULL
+ */
+struct fsnotify_mark *fsnotify_find_inode_mark_locked(struct fsnotify_group *group,
+ struct inode *inode)
{
struct fsnotify_mark *mark;
struct hlist_node *pos;
@@ -282,50 +128,26 @@ static struct fsnotify_mark *fsnotify_find_mark_locked(struct fsnotify_group *gr
* given a group and inode, find the mark associated with that combination.
* if found take a reference to that mark and return it, else return NULL
*/
-struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group,
- struct inode *inode)
+struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group,
+ struct inode *inode)
{
struct fsnotify_mark *mark;
spin_lock(&inode->i_lock);
- mark = fsnotify_find_mark_locked(group, inode);
+ mark = fsnotify_find_inode_mark_locked(group, inode);
spin_unlock(&inode->i_lock);
return mark;
}
-void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old)
-{
- assert_spin_locked(&old->lock);
- new->i.inode = old->i.inode;
- new->group = old->group;
- new->mask = old->mask;
- new->free_mark = old->free_mark;
-}
-
-/*
- * Nothing fancy, just initialize lists and locks and counters.
- */
-void fsnotify_init_mark(struct fsnotify_mark *mark,
- void (*free_mark)(struct fsnotify_mark *mark))
-{
- spin_lock_init(&mark->lock);
- atomic_set(&mark->refcnt, 1);
- INIT_HLIST_NODE(&mark->i.i_list);
- mark->group = NULL;
- mark->mask = 0;
- mark->i.inode = NULL;
- mark->free_mark = free_mark;
-}
-
/*
* Attach an initialized mark mark to a given group and inode.
* These marks may be used for the fsnotify backend to determine which
* event types should be delivered to which group and for which inodes.
*/
-int fsnotify_add_mark(struct fsnotify_mark *mark,
- struct fsnotify_group *group, struct inode *inode,
- int allow_dups)
+int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct inode *inode,
+ int allow_dups)
{
struct fsnotify_mark *lmark = NULL;
int ret = 0;
@@ -336,56 +158,26 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
mark->flags = FSNOTIFY_MARK_FLAG_INODE;
- /*
- * if this group isn't being testing for inode type events we need
- * to start testing
- */
- if (unlikely(list_empty(&group->inode_group_list)))
- fsnotify_add_inode_group(group);
- /*
- * XXX This is where we could also do the fsnotify_add_vfsmount_group
- * if we are setting and vfsmount mark....
-
- if (unlikely(list_empty(&group->vfsmount_group_list)))
- fsnotify_add_vfsmount_group(group);
- */
+ assert_spin_locked(&mark->lock);
+ assert_spin_locked(&group->mark_lock);
- /*
- * LOCKING ORDER!!!!
- * mark->lock
- * group->mark_lock
- * inode->i_lock
- */
- spin_lock(&mark->lock);
- spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
if (!allow_dups)
- lmark = fsnotify_find_mark_locked(group, inode);
+ lmark = fsnotify_find_inode_mark_locked(group, inode);
if (!lmark) {
- mark->group = group;
mark->i.inode = inode;
hlist_add_head(&mark->i.i_list, &inode->i_fsnotify_marks);
- list_add(&mark->g_list, &group->marks_list);
-
- fsnotify_get_mark(mark); /* for i_list and g_list */
-
- atomic_inc(&group->num_marks);
fsnotify_recalc_inode_mask_locked(inode);
}
spin_unlock(&inode->i_lock);
- spin_unlock(&group->mark_lock);
- spin_unlock(&mark->lock);
if (lmark) {
ret = -EEXIST;
iput(inode);
- fsnotify_put_mark(lmark);
- } else {
- __fsnotify_update_child_dentry_flags(inode);
}
return ret;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index cc8f6bcbb4a3e..1d237e1bf7b18 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -97,7 +97,7 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
to_tell = event->to_tell;
- fsn_mark = fsnotify_find_mark(group, to_tell);
+ fsn_mark = fsnotify_find_inode_mark(group, to_tell);
/* race with watch removal? We already passes should_send */
if (unlikely(!fsn_mark))
return 0;
@@ -145,7 +145,7 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
struct fsnotify_mark *fsn_mark;
bool send;
- fsn_mark = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
return false;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index ad5a1ea7827e4..a12315a7553dd 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -566,7 +566,7 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
if (unlikely(!mask))
return -EINVAL;
- fsn_mark = fsnotify_find_mark(group, inode);
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
return -ENOENT;
@@ -644,7 +644,7 @@ static int inotify_new_watch(struct fsnotify_group *group,
goto out_err;
/* we are on the idr, now get on the inode */
- ret = fsnotify_add_mark(&tmp_i_mark->fsn_mark, group, inode, 0);
+ ret = fsnotify_add_mark(&tmp_i_mark->fsn_mark, group, inode, NULL, 0);
if (ret) {
/* we failed to get on the inode, get off the idr */
inotify_remove_from_idr(group, tmp_i_mark);
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
new file mode 100644
index 0000000000000..e56e8768d6765
--- /dev/null
+++ b/fs/notify/mark.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * fsnotify inode mark locking/lifetime/and refcnting
+ *
+ * REFCNT:
+ * The mark->refcnt tells how many "things" in the kernel currently are
+ * referencing this object. The object typically will live inside the kernel
+ * with a refcnt of 2, one for each list it is on (i_list, g_list). Any task
+ * which can find this object holding the appropriete locks, can take a reference
+ * and the object itself is guarenteed to survive until the reference is dropped.
+ *
+ * LOCKING:
+ * There are 3 spinlocks involved with fsnotify inode marks and they MUST
+ * be taken in order as follows:
+ *
+ * mark->lock
+ * group->mark_lock
+ * inode->i_lock
+ *
+ * mark->lock protects 2 things, mark->group and mark->inode. You must hold
+ * that lock to dereference either of these things (they could be NULL even with
+ * the lock)
+ *
+ * group->mark_lock protects the marks_list anchored inside a given group
+ * and each mark is hooked via the g_list. It also sorta protects the
+ * free_g_list, which when used is anchored by a private list on the stack of the
+ * task which held the group->mark_lock.
+ *
+ * inode->i_lock protects the i_fsnotify_marks list anchored inside a
+ * given inode and each mark is hooked via the i_list. (and sorta the
+ * free_i_list)
+ *
+ *
+ * LIFETIME:
+ * Inode marks survive between when they are added to an inode and when their
+ * refcnt==0.
+ *
+ * The inode mark can be cleared for a number of different reasons including:
+ * - The inode is unlinked for the last time. (fsnotify_inode_remove)
+ * - The inode is being evicted from cache. (fsnotify_inode_delete)
+ * - The fs the inode is on is unmounted. (fsnotify_inode_delete/fsnotify_unmount_inodes)
+ * - Something explicitly requests that it be removed. (fsnotify_destroy_mark)
+ * - The fsnotify_group associated with the mark is going away and all such marks
+ * need to be cleaned up. (fsnotify_clear_marks_by_group)
+ *
+ * Worst case we are given an inode and need to clean up all the marks on that
+ * inode. We take i_lock and walk the i_fsnotify_marks safely. For each
+ * mark on the list we take a reference (so the mark can't disappear under us).
+ * We remove that mark form the inode's list of marks and we add this mark to a
+ * private list anchored on the stack using i_free_list; At this point we no
+ * longer fear anything finding the mark using the inode's list of marks.
+ *
+ * We can safely and locklessly run the private list on the stack of everything
+ * we just unattached from the original inode. For each mark on the private list
+ * we grab the mark-> and can thus dereference mark->group and mark->inode. If
+ * we see the group and inode are not NULL we take those locks. Now holding all
+ * 3 locks we can completely remove the mark from other tasks finding it in the
+ * future. Remember, 10 things might already be referencing this mark, but they
+ * better be holding a ref. We drop our reference we took before we unhooked it
+ * from the inode. When the ref hits 0 we can free the mark.
+ *
+ * Very similarly for freeing by group, except we use free_g_list.
+ *
+ * This has the very interesting property of being able to run concurrently with
+ * any (or all) other directions.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/writeback.h> /* for inode_lock */
+
+#include <asm/atomic.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+void fsnotify_get_mark(struct fsnotify_mark *mark)
+{
+ atomic_inc(&mark->refcnt);
+}
+
+void fsnotify_put_mark(struct fsnotify_mark *mark)
+{
+ if (atomic_dec_and_test(&mark->refcnt))
+ mark->free_mark(mark);
+}
+
+/*
+ * Any time a mark is getting freed we end up here.
+ * The caller had better be holding a reference to this mark so we don't actually
+ * do the final put under the mark->lock
+ */
+void fsnotify_destroy_mark(struct fsnotify_mark *mark)
+{
+ struct fsnotify_group *group;
+ struct inode *inode;
+
+ spin_lock(&mark->lock);
+
+ group = mark->group;
+ inode = mark->i.inode;
+
+ BUG_ON(group && !inode);
+ BUG_ON(!group && inode);
+
+ /* if !group something else already marked this to die */
+ if (!group) {
+ spin_unlock(&mark->lock);
+ return;
+ }
+
+ /* 1 from caller and 1 for being on i_list/g_list */
+ BUG_ON(atomic_read(&mark->refcnt) < 2);
+
+ spin_lock(&group->mark_lock);
+
+ if (mark->flags & FSNOTIFY_MARK_FLAG_INODE)
+ fsnotify_destroy_inode_mark(mark);
+ else
+ BUG();
+
+ list_del_init(&mark->g_list);
+ mark->group = NULL;
+
+ fsnotify_put_mark(mark); /* for i_list and g_list */
+
+ spin_unlock(&group->mark_lock);
+ spin_unlock(&mark->lock);
+
+ /*
+ * Some groups like to know that marks are being freed. This is a
+ * callback to the group function to let it know that this mark
+ * is being freed.
+ */
+ if (group->ops->freeing_mark)
+ group->ops->freeing_mark(mark, group);
+
+ /*
+ * __fsnotify_update_child_dentry_flags(inode);
+ *
+ * I really want to call that, but we can't, we have no idea if the inode
+ * still exists the second we drop the mark->lock.
+ *
+ * The next time an event arrive to this inode from one of it's children
+ * __fsnotify_parent will see that the inode doesn't care about it's
+ * children and will update all of these flags then. So really this
+ * is just a lazy update (and could be a perf win...)
+ */
+
+
+ iput(inode);
+
+ /*
+ * it's possible that this group tried to destroy itself, but this
+ * this mark was simultaneously being freed by inode. If that's the
+ * case, we finish freeing the group here.
+ */
+ if (unlikely(atomic_dec_and_test(&group->num_marks)))
+ fsnotify_final_destroy_group(group);
+}
+
+/*
+ * Attach an initialized mark to a given group and fs object.
+ * These marks may be used for the fsnotify backend to determine which
+ * event types should be delivered to which group.
+ */
+int fsnotify_add_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct inode *inode,
+ struct vfsmount *mnt, int allow_dups)
+{
+ int ret = 0;
+
+ BUG_ON(mnt);
+ BUG_ON(inode && mnt);
+ BUG_ON(!inode && !mnt);
+
+ /*
+ * if this group isn't being testing for inode type events we need
+ * to start testing
+ */
+ if (inode && unlikely(list_empty(&group->inode_group_list)))
+ fsnotify_add_inode_group(group);
+ else if (mnt && unlikely(list_empty(&group->vfsmount_group_list)))
+ fsnotify_add_vfsmount_group(group);
+
+ /*
+ * LOCKING ORDER!!!!
+ * mark->lock
+ * group->mark_lock
+ * inode->i_lock
+ */
+ spin_lock(&mark->lock);
+ spin_lock(&group->mark_lock);
+
+ mark->group = group;
+ list_add(&mark->g_list, &group->marks_list);
+ atomic_inc(&group->num_marks);
+ fsnotify_get_mark(mark); /* for i_list and g_list */
+
+ if (inode) {
+ ret = fsnotify_add_inode_mark(mark, group, inode, allow_dups);
+ if (ret)
+ goto err;
+ } else {
+ BUG();
+ }
+
+ spin_unlock(&group->mark_lock);
+ spin_unlock(&mark->lock);
+
+ if (inode)
+ __fsnotify_update_child_dentry_flags(inode);
+
+ return ret;
+err:
+ mark->group = NULL;
+ list_del_init(&mark->g_list);
+ atomic_dec(&group->num_marks);
+ fsnotify_put_mark(mark);
+
+ spin_unlock(&group->mark_lock);
+ spin_unlock(&mark->lock);
+
+ return ret;
+}
+
+/*
+ * Given a group, destroy all of the marks associated with that group.
+ */
+void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
+{
+ struct fsnotify_mark *lmark, *mark;
+ LIST_HEAD(free_list);
+
+ spin_lock(&group->mark_lock);
+ list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) {
+ list_add(&mark->free_g_list, &free_list);
+ list_del_init(&mark->g_list);
+ fsnotify_get_mark(mark);
+ }
+ spin_unlock(&group->mark_lock);
+
+ list_for_each_entry_safe(mark, lmark, &free_list, free_g_list) {
+ fsnotify_destroy_mark(mark);
+ fsnotify_put_mark(mark);
+ }
+}
+
+void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old)
+{
+ assert_spin_locked(&old->lock);
+ new->i.inode = old->i.inode;
+ new->m.mnt = old->m.mnt;
+ new->group = old->group;
+ new->mask = old->mask;
+ new->free_mark = old->free_mark;
+}
+
+/*
+ * Nothing fancy, just initialize lists and locks and counters.
+ */
+void fsnotify_init_mark(struct fsnotify_mark *mark,
+ void (*free_mark)(struct fsnotify_mark *mark))
+{
+ spin_lock_init(&mark->lock);
+ atomic_set(&mark->refcnt, 1);
+ INIT_HLIST_NODE(&mark->i.i_list);
+ mark->group = NULL;
+ mark->mask = 0;
+ mark->i.inode = NULL;
+ mark->free_mark = free_mark;
+}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 7d93572ec5687..27cccbecbf235 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -364,11 +364,12 @@ extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group
extern void fsnotify_recalc_inode_mask(struct inode *inode);
extern void fsnotify_init_mark(struct fsnotify_mark *mark, void (*free_mark)(struct fsnotify_mark *mark));
/* find (and take a reference) to a mark associated with group and inode */
-extern struct fsnotify_mark *fsnotify_find_mark(struct fsnotify_group *group, struct inode *inode);
+extern struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group, struct inode *inode);
/* copy the values from old into new */
extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
/* attach the mark to both the group and the inode */
-extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct fsnotify_group *group, struct inode *inode, int allow_dups);
+extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct fsnotify_group *group,
+ struct inode *inode, struct vfsmount *mnt, int allow_dups);
/* given a mark, flag it to be freed when all references are dropped */
extern void fsnotify_destroy_mark(struct fsnotify_mark *mark);
/* run all the marks in a group, and flag them to be freed */
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 80f8ac328aad1..cfb97d752a618 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -259,7 +259,7 @@ static void untag_chunk(struct node *p)
if (!new)
goto Fallback;
fsnotify_duplicate_mark(&new->mark, entry);
- if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, 1)) {
+ if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, NULL, 1)) {
free_chunk(new);
goto Fallback;
}
@@ -322,7 +322,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree)
return -ENOMEM;
entry = &chunk->mark;
- if (fsnotify_add_mark(entry, audit_tree_group, inode, 0)) {
+ if (fsnotify_add_mark(entry, audit_tree_group, inode, NULL, 0)) {
free_chunk(chunk);
return -ENOSPC;
}
@@ -360,7 +360,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
struct node *p;
int n;
- old_entry = fsnotify_find_mark(audit_tree_group, inode);
+ old_entry = fsnotify_find_inode_mark(audit_tree_group, inode);
if (!old_entry)
return create_chunk(inode, tree);
@@ -395,7 +395,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
}
fsnotify_duplicate_mark(chunk_entry, old_entry);
- if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->i.inode, 1)) {
+ if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->i.inode, NULL, 1)) {
spin_unlock(&old_entry->lock);
free_chunk(chunk);
fsnotify_put_mark(old_entry);
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index d85fa538a722a..7499397a61003 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -101,7 +101,7 @@ static inline struct audit_parent *audit_find_parent(struct inode *inode)
struct audit_parent *parent = NULL;
struct fsnotify_mark *entry;
- entry = fsnotify_find_mark(audit_watch_group, inode);
+ entry = fsnotify_find_inode_mark(audit_watch_group, inode);
if (entry)
parent = container_of(entry, struct audit_parent, mark);
@@ -158,7 +158,7 @@ static struct audit_parent *audit_init_parent(struct nameidata *ndp)
fsnotify_init_mark(&parent->mark, audit_watch_free_mark);
parent->mark.mask = AUDIT_FS_WATCH;
- ret = fsnotify_add_mark(&parent->mark, audit_watch_group, inode, 0);
+ ret = fsnotify_add_mark(&parent->mark, audit_watch_group, inode, NULL, 0);
if (ret < 0) {
audit_free_parent(parent);
return ERR_PTR(ret);
@@ -517,7 +517,7 @@ static bool audit_watch_should_send_event(struct fsnotify_group *group, struct i
struct fsnotify_mark *entry;
bool send;
- entry = fsnotify_find_mark(group, inode);
+ entry = fsnotify_find_inode_mark(group, inode);
if (!entry)
return false;
--
GitLab
From ba643f04cdda170215c8820acd3e201936fc512d Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:27 -0500
Subject: [PATCH 107/863] fsnotify: clear marks to 0 in fsnotify_init_mark
Currently fsnotify_init_mark sets some fields to 0/NULL. Some users
already used some sorts of zalloc, some didn't. This patch uses memset to
explicitly zero everything in the fsnotify_mark when it is initialized so we
don't have to be careful if fields are later added to marks.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/mark.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index e56e8768d6765..57bb1d74a2b6c 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -284,11 +284,8 @@ void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *ol
void fsnotify_init_mark(struct fsnotify_mark *mark,
void (*free_mark)(struct fsnotify_mark *mark))
{
+ memset(mark, 0, sizeof(*mark));
spin_lock_init(&mark->lock);
atomic_set(&mark->refcnt, 1);
- INIT_HLIST_NODE(&mark->i.i_list);
- mark->group = NULL;
- mark->mask = 0;
- mark->i.inode = NULL;
mark->free_mark = free_mark;
}
--
GitLab
From 2504c5d63b811b71bbaa8d5d5af163e698f4df1f Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:27 -0500
Subject: [PATCH 108/863] fsnotify/vfsmount: add fsnotify fields to struct
vfsmount
This patch adds the list and mask fields needed to support vfsmount marks.
These are the same fields fsnotify needs on an inode. They are not used,
just declared and we note where the cleanup hook should be (the function is
not yet defined)
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/namespace.c | 4 ++++
fs/notify/fsnotify.c | 4 +---
include/linux/mount.h | 6 +++++-
3 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/fs/namespace.c b/fs/namespace.c
index 88058de59c7c2..a2d681a6b5e9b 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -29,6 +29,7 @@
#include <linux/log2.h>
#include <linux/idr.h>
#include <linux/fs_struct.h>
+#include <linux/fsnotify.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include "pnode.h"
@@ -150,6 +151,9 @@ struct vfsmount *alloc_vfsmnt(const char *name)
INIT_LIST_HEAD(&mnt->mnt_share);
INIT_LIST_HEAD(&mnt->mnt_slave_list);
INIT_LIST_HEAD(&mnt->mnt_slave);
+#ifdef CONFIG_FSNOTIFY
+ INIT_HLIST_HEAD(&mnt->mnt_fsnotify_marks);
+#endif
#ifdef CONFIG_SMP
mnt->mnt_writers = alloc_percpu(int);
if (!mnt->mnt_writers)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 60e84fd338dd3..e0bf86953e1b8 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -163,9 +163,7 @@ static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
if (!mnt)
return false;
- /* hook in this when mnt->mnt_fsnotify_mask is defined */
- /* return (test_mask & path->mnt->mnt_fsnotify_mask); */
- return false;
+ return (test_mask & mnt->mnt_fsnotify_mask);
}
/*
* This is the main call to fsnotify. The VFS calls into hook specific functions
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 4bd05474d11d5..907210bd9f9c6 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -56,7 +56,11 @@ struct vfsmount {
struct list_head mnt_mounts; /* list of children, anchored here */
struct list_head mnt_child; /* and going through their mnt_child */
int mnt_flags;
- /* 4 bytes hole on 64bits arches */
+ /* 4 bytes hole on 64bits arches without fsnotify */
+#ifdef CONFIG_FSNOTIFY
+ __u32 mnt_fsnotify_mask;
+ struct hlist_head mnt_fsnotify_marks;
+#endif
const char *mnt_devname; /* Name of device e.g. /dev/dsk/hda1 */
struct list_head mnt_list;
struct list_head mnt_expire; /* link in fs-specific expiry list */
--
GitLab
From 0d48b7f01f442bc88a69aa98f3b6b015f2817608 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:27 -0500
Subject: [PATCH 109/863] fsnotify: vfsmount marks generic functions
Much like inode-mark.c has all of the code dealing with marks on inodes
this patch adds a vfsmount-mark.c which has similar code but is intended
for marks on vfsmounts.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/Makefile | 2 +-
fs/notify/fsnotify.h | 6 ++
fs/notify/mark.c | 20 ++--
fs/notify/vfsmount_mark.c | 171 +++++++++++++++++++++++++++++++
include/linux/fsnotify_backend.h | 2 +
5 files changed, 191 insertions(+), 10 deletions(-)
create mode 100644 fs/notify/vfsmount_mark.c
diff --git a/fs/notify/Makefile b/fs/notify/Makefile
index 8f7f3b024a2ea..ae5f33a6d868c 100644
--- a/fs/notify/Makefile
+++ b/fs/notify/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_FSNOTIFY) += fsnotify.o notification.o group.o inode_mark.o \
- mark.o
+ mark.o vfsmount_mark.o
obj-y += dnotify/
obj-y += inotify/
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index 7c7a904b802d6..38f3fb5cef28b 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -24,6 +24,10 @@ extern void fsnotify_flush_notify(struct fsnotify_group *group);
extern int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
struct fsnotify_group *group, struct inode *inode,
int allow_dups);
+/* add a mark to a vfsmount */
+extern int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct vfsmount *mnt,
+ int allow_dups);
/* add a group to the inode group list */
extern void fsnotify_add_inode_group(struct fsnotify_group *group);
@@ -32,6 +36,8 @@ extern void fsnotify_add_vfsmount_group(struct fsnotify_group *group);
/* final kfree of a group */
extern void fsnotify_final_destroy_group(struct fsnotify_group *group);
+/* vfsmount specific destruction of a mark */
+extern void fsnotify_destroy_vfsmount_mark(struct fsnotify_mark *mark);
/* inode specific destruction of a mark */
extern void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark);
/* run the list of all marks associated with inode and flag them to be freed */
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 57bb1d74a2b6c..d296ec9ffb2a0 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -115,15 +115,11 @@ void fsnotify_put_mark(struct fsnotify_mark *mark)
void fsnotify_destroy_mark(struct fsnotify_mark *mark)
{
struct fsnotify_group *group;
- struct inode *inode;
+ struct inode *inode = NULL;
spin_lock(&mark->lock);
group = mark->group;
- inode = mark->i.inode;
-
- BUG_ON(group && !inode);
- BUG_ON(!group && inode);
/* if !group something else already marked this to die */
if (!group) {
@@ -136,8 +132,11 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
spin_lock(&group->mark_lock);
- if (mark->flags & FSNOTIFY_MARK_FLAG_INODE)
+ if (mark->flags & FSNOTIFY_MARK_FLAG_INODE) {
fsnotify_destroy_inode_mark(mark);
+ inode = mark->i.inode;
+ } else if (mark->flags & FSNOTIFY_MARK_FLAG_VFSMOUNT)
+ fsnotify_destroy_vfsmount_mark(mark);
else
BUG();
@@ -169,8 +168,8 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
* is just a lazy update (and could be a perf win...)
*/
-
- iput(inode);
+ if (inode)
+ iput(inode);
/*
* it's possible that this group tried to destroy itself, but this
@@ -192,7 +191,6 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
{
int ret = 0;
- BUG_ON(mnt);
BUG_ON(inode && mnt);
BUG_ON(!inode && !mnt);
@@ -223,6 +221,10 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
ret = fsnotify_add_inode_mark(mark, group, inode, allow_dups);
if (ret)
goto err;
+ } else if (mnt) {
+ ret = fsnotify_add_vfsmount_mark(mark, group, mnt, allow_dups);
+ if (ret)
+ goto err;
} else {
BUG();
}
diff --git a/fs/notify/vfsmount_mark.c b/fs/notify/vfsmount_mark.c
new file mode 100644
index 0000000000000..1b61d0a942de5
--- /dev/null
+++ b/fs/notify/vfsmount_mark.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/writeback.h> /* for inode_lock */
+
+#include <asm/atomic.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+void fsnotify_clear_marks_by_mount(struct vfsmount *mnt)
+{
+ struct fsnotify_mark *mark, *lmark;
+ struct hlist_node *pos, *n;
+ LIST_HEAD(free_list);
+
+ spin_lock(&mnt->mnt_root->d_lock);
+ hlist_for_each_entry_safe(mark, pos, n, &mnt->mnt_fsnotify_marks, m.m_list) {
+ list_add(&mark->m.free_m_list, &free_list);
+ hlist_del_init(&mark->m.m_list);
+ fsnotify_get_mark(mark);
+ }
+ spin_unlock(&mnt->mnt_root->d_lock);
+
+ list_for_each_entry_safe(mark, lmark, &free_list, m.free_m_list) {
+ fsnotify_destroy_mark(mark);
+ fsnotify_put_mark(mark);
+ }
+}
+
+/*
+ * Recalculate the mask of events relevant to a given vfsmount locked.
+ */
+static void fsnotify_recalc_vfsmount_mask_locked(struct vfsmount *mnt)
+{
+ struct fsnotify_mark *mark;
+ struct hlist_node *pos;
+ __u32 new_mask = 0;
+
+ assert_spin_locked(&mnt->mnt_root->d_lock);
+
+ hlist_for_each_entry(mark, pos, &mnt->mnt_fsnotify_marks, m.m_list)
+ new_mask |= mark->mask;
+ mnt->mnt_fsnotify_mask = new_mask;
+}
+
+/*
+ * Recalculate the mnt->mnt_fsnotify_mask, or the mask of all FS_* event types
+ * any notifier is interested in hearing for this mount point
+ */
+void fsnotify_recalc_vfsmount_mask(struct vfsmount *mnt)
+{
+ spin_lock(&mnt->mnt_root->d_lock);
+ fsnotify_recalc_vfsmount_mask_locked(mnt);
+ spin_unlock(&mnt->mnt_root->d_lock);
+}
+
+void fsnotify_destroy_vfsmount_mark(struct fsnotify_mark *mark)
+{
+ struct vfsmount *mnt = mark->m.mnt;
+
+ assert_spin_locked(&mark->lock);
+ assert_spin_locked(&mark->group->mark_lock);
+
+ spin_lock(&mnt->mnt_root->d_lock);
+
+ hlist_del_init(&mark->m.m_list);
+ mark->m.mnt = NULL;
+
+ fsnotify_recalc_vfsmount_mask_locked(mnt);
+
+ spin_unlock(&mnt->mnt_root->d_lock);
+}
+
+static struct fsnotify_mark *fsnotify_find_vfsmount_mark_locked(struct fsnotify_group *group,
+ struct vfsmount *mnt)
+{
+ struct fsnotify_mark *mark;
+ struct hlist_node *pos;
+
+ assert_spin_locked(&mnt->mnt_root->d_lock);
+
+ hlist_for_each_entry(mark, pos, &mnt->mnt_fsnotify_marks, m.m_list) {
+ if (mark->group == group) {
+ fsnotify_get_mark(mark);
+ return mark;
+ }
+ }
+ return NULL;
+}
+
+/*
+ * given a group and vfsmount, find the mark associated with that combination.
+ * if found take a reference to that mark and return it, else return NULL
+ */
+struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group,
+ struct vfsmount *mnt)
+{
+ struct fsnotify_mark *mark;
+
+ spin_lock(&mnt->mnt_root->d_lock);
+ mark = fsnotify_find_vfsmount_mark_locked(group, mnt);
+ spin_unlock(&mnt->mnt_root->d_lock);
+
+ return mark;
+}
+
+/*
+ * Attach an initialized mark to a given group and vfsmount.
+ * These marks may be used for the fsnotify backend to determine which
+ * event types should be delivered to which groups.
+ */
+int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
+ struct fsnotify_group *group, struct vfsmount *mnt,
+ int allow_dups)
+{
+ struct fsnotify_mark *lmark = NULL;
+ int ret = 0;
+
+ mark->flags = FSNOTIFY_MARK_FLAG_VFSMOUNT;
+
+ /*
+ * LOCKING ORDER!!!!
+ * mark->lock
+ * group->mark_lock
+ * mnt->mnt_root->d_lock
+ */
+ assert_spin_locked(&mark->lock);
+ assert_spin_locked(&group->mark_lock);
+
+ spin_lock(&mnt->mnt_root->d_lock);
+
+ if (!allow_dups)
+ lmark = fsnotify_find_vfsmount_mark_locked(group, mnt);
+ if (!lmark) {
+ mark->m.mnt = mnt;
+
+ hlist_add_head(&mark->m.m_list, &mnt->mnt_fsnotify_marks);
+
+ fsnotify_recalc_vfsmount_mask_locked(mnt);
+ } else {
+ ret = -EEXIST;
+ }
+
+ spin_unlock(&mnt->mnt_root->d_lock);
+
+ return ret;
+}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 27cccbecbf235..f21ff1bd4b5aa 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -360,6 +360,8 @@ extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group
/* functions used to manipulate the marks attached to inodes */
+/* run all marks associated with a vfsmount and update mnt->mnt_fsnotify_mask */
+extern void fsnotify_recalc_vfsmount_mask(struct vfsmount *mnt);
/* run all marks associated with an inode and update inode->i_fsnotify_mask */
extern void fsnotify_recalc_inode_mask(struct inode *inode);
extern void fsnotify_init_mark(struct fsnotify_mark *mark, void (*free_mark)(struct fsnotify_mark *mark));
--
GitLab
From ca9c726eea013394d1e846331b117effb21ead83 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:27 -0500
Subject: [PATCH 110/863] fsnotify: Infrastructure for per-mount watches
Per-mount watches allow groups to listen to fsnotify events on an entire
mount. This patch simply adds and initializes the fields needed in the
vfsmount struct to make this happen.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/namespace.c | 1 +
fs/notify/fsnotify.c | 5 +++++
fs/notify/fsnotify.h | 2 ++
include/linux/fsnotify.h | 8 ++++++++
include/linux/fsnotify_backend.h | 4 ++++
5 files changed, 20 insertions(+)
diff --git a/fs/namespace.c b/fs/namespace.c
index a2d681a6b5e9b..1969d6b2571eb 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -614,6 +614,7 @@ static inline void __mntput(struct vfsmount *mnt)
* provides barriers, so count_mnt_writers() below is safe. AV
*/
WARN_ON(count_mnt_writers(mnt));
+ fsnotify_vfsmount_delete(mnt);
dput(mnt->mnt_root);
free_vfsmnt(mnt);
deactivate_super(sb);
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index e0bf86953e1b8..7f14ddc3efc22 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -36,6 +36,11 @@ void __fsnotify_inode_delete(struct inode *inode)
}
EXPORT_SYMBOL_GPL(__fsnotify_inode_delete);
+void __fsnotify_vfsmount_delete(struct vfsmount *mnt)
+{
+ fsnotify_clear_marks_by_mount(mnt);
+}
+
/*
* Given an inode, first check if we care what happens to our children. Inotify
* and dnotify both tell their parents about events. If we care about any event
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index 38f3fb5cef28b..204353c0f6639 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -42,6 +42,8 @@ extern void fsnotify_destroy_vfsmount_mark(struct fsnotify_mark *mark);
extern void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark);
/* run the list of all marks associated with inode and flag them to be freed */
extern void fsnotify_clear_marks_by_inode(struct inode *inode);
+/* run the list of all marks associated with vfsmount and flag them to be freed */
+extern void fsnotify_clear_marks_by_mount(struct vfsmount *mnt);
/*
* update the dentry->d_flags of all of inode's children to indicate if inode cares
* about events that happen to its children.
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 5184a2b786c1e..06c0e50c79680 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -95,6 +95,14 @@ static inline void fsnotify_inode_delete(struct inode *inode)
__fsnotify_inode_delete(inode);
}
+/*
+ * fsnotify_vfsmount_delete - a vfsmount is being destroyed, clean up is needed
+ */
+static inline void fsnotify_vfsmount_delete(struct vfsmount *mnt)
+{
+ __fsnotify_vfsmount_delete(mnt);
+}
+
/*
* fsnotify_nameremove - a filename was removed from a directory
*/
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index f21ff1bd4b5aa..1af42cbfc4294 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -282,6 +282,7 @@ extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
const char *name, u32 cookie);
extern void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask);
extern void __fsnotify_inode_delete(struct inode *inode);
+extern void __fsnotify_vfsmount_delete(struct vfsmount *mnt);
extern u32 fsnotify_get_cookie(void);
static inline int fsnotify_inode_watches_children(struct inode *inode)
@@ -402,6 +403,9 @@ static inline void __fsnotify_parent(struct path *path, struct dentry *dentry, _
static inline void __fsnotify_inode_delete(struct inode *inode)
{}
+static inline void __fsnotify_vfsmount_delete(struct vfsmount *mnt)
+{}
+
static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
{}
--
GitLab
From 1c529063a3e4c15eaae28db31326a7aaab7091b5 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:28 -0500
Subject: [PATCH 111/863] fanotify: should_send_event needs to handle vfsmounts
currently should_send_event in fanotify only cares about marks on inodes.
This patch extends that interface to indicate that it cares about events
that happened on vfsmounts.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 56 +++++++++++++++++++++++++-------
include/linux/fsnotify_backend.h | 2 ++
2 files changed, 47 insertions(+), 11 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index aa5e92661142f..202be8adb2ec6 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -2,6 +2,7 @@
#include <linux/fsnotify_backend.h>
#include <linux/init.h>
#include <linux/kernel.h> /* UINT_MAX */
+#include <linux/mount.h>
#include <linux/types.h>
#include "fanotify.h"
@@ -99,24 +100,35 @@ static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_e
return ret;
}
-static bool fanotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, __u32 mask, void *data,
- int data_type)
+static bool should_send_vfsmount_event(struct fsnotify_group *group, struct vfsmount *mnt,
+ __u32 mask)
{
struct fsnotify_mark *fsn_mark;
bool send;
- pr_debug("%s: group=%p inode=%p mask=%x data=%p data_type=%d\n",
- __func__, group, inode, mask, data, data_type);
+ pr_debug("%s: group=%p vfsmount=%p mask=%x\n",
+ __func__, group, mnt, mask);
- /* sorry, fanotify only gives a damn about files and dirs */
- if (!S_ISREG(inode->i_mode) &&
- !S_ISDIR(inode->i_mode))
+ fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
+ if (!fsn_mark)
return false;
- /* if we don't have enough info to send an event to userspace say no */
- if (data_type != FSNOTIFY_EVENT_PATH)
- return false;
+ send = (mask & fsn_mark->mask);
+
+ /* find took a reference */
+ fsnotify_put_mark(fsn_mark);
+
+ return send;
+}
+
+static bool should_send_inode_event(struct fsnotify_group *group, struct inode *inode,
+ __u32 mask)
+{
+ struct fsnotify_mark *fsn_mark;
+ bool send;
+
+ pr_debug("%s: group=%p inode=%p mask=%x\n",
+ __func__, group, inode, mask);
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
@@ -142,6 +154,28 @@ static bool fanotify_should_send_event(struct fsnotify_group *group, struct inod
return send;
}
+static bool fanotify_should_send_event(struct fsnotify_group *group, struct inode *to_tell,
+ struct vfsmount *mnt, __u32 mask, void *data,
+ int data_type)
+{
+ pr_debug("%s: group=%p to_tell=%p mnt=%p mask=%x data=%p data_type=%d\n",
+ __func__, group, to_tell, mnt, mask, data, data_type);
+
+ /* sorry, fanotify only gives a damn about files and dirs */
+ if (!S_ISREG(to_tell->i_mode) &&
+ !S_ISDIR(to_tell->i_mode))
+ return false;
+
+ /* if we don't have enough info to send an event to userspace say no */
+ if (data_type != FSNOTIFY_EVENT_PATH)
+ return false;
+
+ if (mnt)
+ return should_send_vfsmount_event(group, mnt, mask);
+ else
+ return should_send_inode_event(group, to_tell, mask);
+}
+
const struct fsnotify_ops fanotify_fsnotify_ops = {
.handle_event = fanotify_handle_event,
.should_send_event = fanotify_should_send_event,
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 1af42cbfc4294..2d2f015fb7002 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -368,6 +368,8 @@ extern void fsnotify_recalc_inode_mask(struct inode *inode);
extern void fsnotify_init_mark(struct fsnotify_mark *mark, void (*free_mark)(struct fsnotify_mark *mark));
/* find (and take a reference) to a mark associated with group and inode */
extern struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group, struct inode *inode);
+/* find (and take a reference) to a mark associated with group and vfsmount */
+extern struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group, struct vfsmount *mnt);
/* copy the values from old into new */
extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
/* attach the mark to both the group and the inode */
--
GitLab
From 88826276dcaf4cef9cc7c2695ff15c6d20d4a74d Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:28 -0500
Subject: [PATCH 112/863] fanotify: infrastructure to add an remove marks on
vfsmounts
infrastructure work to add and remove marks on vfsmounts. This should get
every set up except wiring the functions to the syscalls.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 185 +++++++++++++++++++++--------
1 file changed, 133 insertions(+), 52 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 05351936a7257..cb7a0c5ff854c 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -295,31 +295,83 @@ static int fanotify_find_path(int dfd, const char __user *filename,
return ret;
}
-static int fanotify_remove_mark(struct fsnotify_group *group,
- struct inode *inode,
- __u32 mask)
+static void fanotify_update_object_mask(struct fsnotify_group *group,
+ struct inode *inode,
+ struct vfsmount *mnt,
+ struct fsnotify_mark *fsn_mark,
+ unsigned int flags,
+ __u32 mask)
{
- struct fsnotify_mark *fsn_mark;
- __u32 new_mask;
-
- pr_debug("%s: group=%p inode=%p mask=%x\n", __func__,
- group, inode, mask);
+ __u32 old_mask, new_mask;
- fsn_mark = fsnotify_find_inode_mark(group, inode);
- if (!fsn_mark)
- return -ENOENT;
+ pr_debug("%s: group=%p inode=%p mnt=%p fsn_mark=%p flags=%x mask=%x\n",
+ __func__, group, inode, mnt, fsn_mark, flags, mask);
spin_lock(&fsn_mark->lock);
- fsn_mark->mask &= ~mask;
+ old_mask = fsn_mark->mask;
+ if (flags & FAN_MARK_ADD)
+ fsn_mark->mask |= mask;
+ else if (flags & FAN_MARK_REMOVE)
+ fsn_mark->mask &= ~mask;
+ else
+ BUG();
new_mask = fsn_mark->mask;
spin_unlock(&fsn_mark->lock);
if (!new_mask)
fsnotify_destroy_mark(fsn_mark);
+
+ /* we made changes to a mask, update the group mask and the object mask
+ * so things happen quickly. */
+ if (old_mask != new_mask) {
+ __u32 dropped, do_object, do_group;
+
+ /* more bits in old than in new? */
+ dropped = (old_mask & ~new_mask);
+ /* more bits in this fsn_mark than the group? */
+ do_group = (new_mask & ~group->mask);
+
+ if (inode) {
+ /* more bits in this fsn_mark than the object's mask? */
+ do_object = (new_mask & ~inode->i_fsnotify_mask);
+ /* update the object with this new fsn_mark */
+ if (dropped || do_object)
+ fsnotify_recalc_inode_mask(inode);
+ } else if (mnt) {
+ /* more bits in this fsn_mark than the object's mask? */
+ do_object = (new_mask & ~mnt->mnt_fsnotify_mask);
+ /* update the object with this new fsn_mark */
+ if (dropped || do_object)
+ fsnotify_recalc_vfsmount_mask(mnt);
+ } else {
+ BUG();
+ }
+
+ /* update the group mask with the new mask */
+ if (dropped || do_group)
+ fsnotify_recalc_group_mask(group);
+ }
+}
+
+static int fanotify_remove_mark(struct fsnotify_group *group, struct inode *inode,
+ struct vfsmount *mnt, unsigned int flags, __u32 mask)
+{
+ struct fsnotify_mark *fsn_mark = NULL;
+
+ BUG_ON(inode && mnt);
+ BUG_ON(!inode && !mnt);
+
+ if (inode)
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
+ else if (mnt)
+ fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
else
- fsnotify_recalc_inode_mask(inode);
+ BUG();
- fsnotify_recalc_group_mask(group);
+ if (!fsn_mark)
+ return -ENOENT;
+
+ fanotify_update_object_mask(group, inode, mnt, fsn_mark, flags, mask);
/* matches the fsnotify_find_inode_mark() */
fsnotify_put_mark(fsn_mark);
@@ -327,22 +379,48 @@ static int fanotify_remove_mark(struct fsnotify_group *group,
return 0;
}
-static int fanotify_add_mark(struct fsnotify_group *group,
- struct inode *inode,
- __u32 mask)
+static struct fsnotify_mark *fanotify_add_vfsmount_mark(struct fsnotify_group *group,
+ struct vfsmount *mnt)
{
struct fsnotify_mark *fsn_mark;
- __u32 old_mask, new_mask;
- int ret;
- pr_debug("%s: group=%p inode=%p mask=%x\n", __func__,
- group, inode, mask);
+ fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
+ if (!fsn_mark) {
+ struct fsnotify_mark *new_fsn_mark;
+ int ret;
+
+ fsn_mark = ERR_PTR(-ENOMEM);
+ new_fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
+ if (!new_fsn_mark)
+ goto out;
+
+ fsnotify_init_mark(new_fsn_mark, fanotify_free_mark);
+ ret = fsnotify_add_mark(new_fsn_mark, group, NULL, mnt, 0);
+ if (ret) {
+ fsn_mark = ERR_PTR(ret);
+ fanotify_free_mark(new_fsn_mark);
+ goto out;
+ }
+
+ fsn_mark = new_fsn_mark;
+ }
+out:
+ return fsn_mark;
+}
+
+static struct fsnotify_mark *fanotify_add_inode_mark(struct fsnotify_group *group,
+ struct inode *inode)
+{
+ struct fsnotify_mark *fsn_mark;
+
+ pr_debug("%s: group=%p inode=%p\n", __func__, group, inode);
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark) {
struct fsnotify_mark *new_fsn_mark;
+ int ret;
- ret = -ENOMEM;
+ fsn_mark = ERR_PTR(-ENOMEM);
new_fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
if (!new_fsn_mark)
goto out;
@@ -350,57 +428,60 @@ static int fanotify_add_mark(struct fsnotify_group *group,
fsnotify_init_mark(new_fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(new_fsn_mark, group, inode, NULL, 0);
if (ret) {
+ fsn_mark = ERR_PTR(ret);
fanotify_free_mark(new_fsn_mark);
goto out;
}
fsn_mark = new_fsn_mark;
}
+out:
+ return fsn_mark;
+}
- ret = 0;
+static int fanotify_add_mark(struct fsnotify_group *group, struct inode *inode,
+ struct vfsmount *mnt, unsigned int flags, __u32 mask)
+{
+ struct fsnotify_mark *fsn_mark;
- spin_lock(&fsn_mark->lock);
- old_mask = fsn_mark->mask;
- fsn_mark->mask |= mask;
- new_mask = fsn_mark->mask;
- spin_unlock(&fsn_mark->lock);
+ pr_debug("%s: group=%p inode=%p mnt=%p flags=%x mask=%x\n",
+ __func__, group, inode, mnt, flags, mask);
- /* we made changes to a mask, update the group mask and the inode mask
- * so things happen quickly. */
- if (old_mask != new_mask) {
- /* more bits in old than in new? */
- int dropped = (old_mask & ~new_mask);
- /* more bits in this mark than the inode's mask? */
- int do_inode = (new_mask & ~inode->i_fsnotify_mask);
- /* more bits in this mark than the group? */
- int do_group = (new_mask & ~group->mask);
+ BUG_ON(inode && mnt);
+ BUG_ON(!inode && !mnt);
- /* update the inode with this new mark */
- if (dropped || do_inode)
- fsnotify_recalc_inode_mask(inode);
+ if (inode)
+ fsn_mark = fanotify_add_inode_mark(group, inode);
+ else if (mnt)
+ fsn_mark = fanotify_add_vfsmount_mark(group, mnt);
+ else
+ BUG();
- /* update the group mask with the new mask */
- if (dropped || do_group)
- fsnotify_recalc_group_mask(group);
- }
+ if (IS_ERR(fsn_mark))
+ goto out;
+
+ fanotify_update_object_mask(group, inode, mnt, fsn_mark, flags, mask);
/* match the init or the find.... */
fsnotify_put_mark(fsn_mark);
out:
- return ret;
+ return PTR_ERR(fsn_mark);
}
static int fanotify_update_mark(struct fsnotify_group *group,
- struct inode *inode, int flags,
- __u32 mask)
+ struct inode *inode, struct vfsmount *mnt,
+ int flags, __u32 mask)
{
- pr_debug("%s: group=%p inode=%p flags=%x mask=%x\n", __func__,
- group, inode, flags, mask);
+ pr_debug("%s: group=%p inode=%p mnt=%p flags=%x mask=%x\n",
+ __func__, group, inode, mnt, flags, mask);
+
+ BUG_ON(inode && mnt);
+ BUG_ON(!inode && !mnt);
if (flags & FAN_MARK_ADD)
- fanotify_add_mark(group, inode, mask);
+ fanotify_add_mark(group, inode, mnt, flags, mask);
else if (flags & FAN_MARK_REMOVE)
- fanotify_remove_mark(group, inode, mask);
+ fanotify_remove_mark(group, inode, mnt, flags, mask);
else
BUG();
@@ -502,7 +583,7 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
group = filp->private_data;
/* create/update an inode mark */
- ret = fanotify_update_mark(group, inode, flags, mask);
+ ret = fanotify_update_mark(group, inode, NULL, flags, mask);
path_put(&path);
fput_and_out:
--
GitLab
From c6223f464927cab9f4b10169b78c51d84228faf8 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:28 -0500
Subject: [PATCH 113/863] fanotify: remove fanotify_update_mark
fanotify_update_mark() doesn't do much useful; remove it.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 31 ++++++++++--------------------
1 file changed, 10 insertions(+), 21 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index cb7a0c5ff854c..0f25fc20a6a77 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -468,26 +468,6 @@ static int fanotify_add_mark(struct fsnotify_group *group, struct inode *inode,
return PTR_ERR(fsn_mark);
}
-static int fanotify_update_mark(struct fsnotify_group *group,
- struct inode *inode, struct vfsmount *mnt,
- int flags, __u32 mask)
-{
- pr_debug("%s: group=%p inode=%p mnt=%p flags=%x mask=%x\n",
- __func__, group, inode, mnt, flags, mask);
-
- BUG_ON(inode && mnt);
- BUG_ON(!inode && !mnt);
-
- if (flags & FAN_MARK_ADD)
- fanotify_add_mark(group, inode, mnt, flags, mask);
- else if (flags & FAN_MARK_REMOVE)
- fanotify_remove_mark(group, inode, mnt, flags, mask);
- else
- BUG();
-
- return 0;
-}
-
static bool fanotify_mark_validate_input(int flags,
__u32 mask)
{
@@ -583,7 +563,16 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
group = filp->private_data;
/* create/update an inode mark */
- ret = fanotify_update_mark(group, inode, NULL, flags, mask);
+ switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
+ case FAN_MARK_ADD:
+ ret = fanotify_add_mark(group, inode, NULL, flags, mask);
+ break;
+ case FAN_MARK_REMOVE:
+ ret = fanotify_remove_mark(group, inode, NULL, flags, mask);
+ break;
+ default:
+ ret = -EINVAL;
+ }
path_put(&path);
fput_and_out:
--
GitLab
From 088b09b0ac7a866a35962eeaea5d5607bd1840b7 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:28 -0500
Subject: [PATCH 114/863] fanotify: do not call fanotify_update_object_mask in
fanotify_remove_mark
Recalculate masks in fanotify_remove_mark, don't use
fanotify_update_object_mask. This gets us one step closers to readable
code.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 33 ++++++++++++++++++++++++++----
1 file changed, 29 insertions(+), 4 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 0f25fc20a6a77..96d4ffd725193 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -353,10 +353,26 @@ static void fanotify_update_object_mask(struct fsnotify_group *group,
}
}
+static __u32 fanotify_mark_remove_from_mask(struct fsnotify_mark *fsn_mark, __u32 mask)
+{
+ __u32 oldmask;
+
+ spin_lock(&fsn_mark->lock);
+ oldmask = fsn_mark->mask;
+ fsn_mark->mask = oldmask & ~mask;
+ spin_unlock(&fsn_mark->lock);
+
+ if (!(oldmask & ~mask))
+ fsnotify_destroy_mark(fsn_mark);
+
+ return mask & oldmask;
+}
+
static int fanotify_remove_mark(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, unsigned int flags, __u32 mask)
+ struct vfsmount *mnt, __u32 mask)
{
struct fsnotify_mark *fsn_mark = NULL;
+ __u32 removed;
BUG_ON(inode && mnt);
BUG_ON(!inode && !mnt);
@@ -371,11 +387,20 @@ static int fanotify_remove_mark(struct fsnotify_group *group, struct inode *inod
if (!fsn_mark)
return -ENOENT;
- fanotify_update_object_mask(group, inode, mnt, fsn_mark, flags, mask);
-
+ removed = fanotify_mark_remove_from_mask(fsn_mark, mask);
/* matches the fsnotify_find_inode_mark() */
fsnotify_put_mark(fsn_mark);
+ if (removed & group->mask)
+ fsnotify_recalc_group_mask(group);
+ if (inode) {
+ if (removed & inode->i_fsnotify_mask)
+ fsnotify_recalc_inode_mask(inode);
+ } else if (mnt) {
+ if (removed & mnt->mnt_fsnotify_mask)
+ fsnotify_recalc_vfsmount_mask(mnt);
+ }
+
return 0;
}
@@ -568,7 +593,7 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
ret = fanotify_add_mark(group, inode, NULL, flags, mask);
break;
case FAN_MARK_REMOVE:
- ret = fanotify_remove_mark(group, inode, NULL, flags, mask);
+ ret = fanotify_remove_mark(group, inode, NULL, mask);
break;
default:
ret = -EINVAL;
--
GitLab
From 912ee3946c5e57de0d05baf3b60b65ce6bf3ff96 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:28 -0500
Subject: [PATCH 115/863] fanotify: do not call fanotify_update_object_mask in
fanotify_add_mark
Recalculate masks in fanotify_add_mark, don't use
fanotify_update_object_mask. This gets us one step closers to readable
code.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 144 ++++++++++-------------------
1 file changed, 50 insertions(+), 94 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 96d4ffd725193..db7467782e8cd 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -295,64 +295,6 @@ static int fanotify_find_path(int dfd, const char __user *filename,
return ret;
}
-static void fanotify_update_object_mask(struct fsnotify_group *group,
- struct inode *inode,
- struct vfsmount *mnt,
- struct fsnotify_mark *fsn_mark,
- unsigned int flags,
- __u32 mask)
-{
- __u32 old_mask, new_mask;
-
- pr_debug("%s: group=%p inode=%p mnt=%p fsn_mark=%p flags=%x mask=%x\n",
- __func__, group, inode, mnt, fsn_mark, flags, mask);
-
- spin_lock(&fsn_mark->lock);
- old_mask = fsn_mark->mask;
- if (flags & FAN_MARK_ADD)
- fsn_mark->mask |= mask;
- else if (flags & FAN_MARK_REMOVE)
- fsn_mark->mask &= ~mask;
- else
- BUG();
- new_mask = fsn_mark->mask;
- spin_unlock(&fsn_mark->lock);
-
- if (!new_mask)
- fsnotify_destroy_mark(fsn_mark);
-
- /* we made changes to a mask, update the group mask and the object mask
- * so things happen quickly. */
- if (old_mask != new_mask) {
- __u32 dropped, do_object, do_group;
-
- /* more bits in old than in new? */
- dropped = (old_mask & ~new_mask);
- /* more bits in this fsn_mark than the group? */
- do_group = (new_mask & ~group->mask);
-
- if (inode) {
- /* more bits in this fsn_mark than the object's mask? */
- do_object = (new_mask & ~inode->i_fsnotify_mask);
- /* update the object with this new fsn_mark */
- if (dropped || do_object)
- fsnotify_recalc_inode_mask(inode);
- } else if (mnt) {
- /* more bits in this fsn_mark than the object's mask? */
- do_object = (new_mask & ~mnt->mnt_fsnotify_mask);
- /* update the object with this new fsn_mark */
- if (dropped || do_object)
- fsnotify_recalc_vfsmount_mask(mnt);
- } else {
- BUG();
- }
-
- /* update the group mask with the new mask */
- if (dropped || do_group)
- fsnotify_recalc_group_mask(group);
- }
-}
-
static __u32 fanotify_mark_remove_from_mask(struct fsnotify_mark *fsn_mark, __u32 mask)
{
__u32 oldmask;
@@ -404,89 +346,103 @@ static int fanotify_remove_mark(struct fsnotify_group *group, struct inode *inod
return 0;
}
+static __u32 fanotify_mark_add_to_mask(struct fsnotify_mark *fsn_mark, __u32 mask)
+{
+ __u32 oldmask;
+
+ spin_lock(&fsn_mark->lock);
+ oldmask = fsn_mark->mask;
+ fsn_mark->mask = oldmask | mask;
+ spin_unlock(&fsn_mark->lock);
+
+ return mask & ~oldmask;
+}
+
static struct fsnotify_mark *fanotify_add_vfsmount_mark(struct fsnotify_group *group,
- struct vfsmount *mnt)
+ struct vfsmount *mnt, __u32 mask)
{
struct fsnotify_mark *fsn_mark;
+ __u32 added;
fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
if (!fsn_mark) {
- struct fsnotify_mark *new_fsn_mark;
int ret;
- fsn_mark = ERR_PTR(-ENOMEM);
- new_fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
- if (!new_fsn_mark)
- goto out;
+ fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
+ if (!fsn_mark)
+ return ERR_PTR(-ENOMEM);
- fsnotify_init_mark(new_fsn_mark, fanotify_free_mark);
- ret = fsnotify_add_mark(new_fsn_mark, group, NULL, mnt, 0);
+ fsnotify_init_mark(fsn_mark, fanotify_free_mark);
+ ret = fsnotify_add_mark(fsn_mark, group, NULL, mnt, 0);
if (ret) {
- fsn_mark = ERR_PTR(ret);
- fanotify_free_mark(new_fsn_mark);
- goto out;
+ fanotify_free_mark(fsn_mark);
+ return ERR_PTR(ret);
}
-
- fsn_mark = new_fsn_mark;
}
-out:
+ added = fanotify_mark_add_to_mask(fsn_mark, mask);
+ if (added) {
+ if (added & ~group->mask)
+ fsnotify_recalc_group_mask(group);
+ if (added & ~mnt->mnt_fsnotify_mask)
+ fsnotify_recalc_vfsmount_mask(mnt);
+ }
return fsn_mark;
}
static struct fsnotify_mark *fanotify_add_inode_mark(struct fsnotify_group *group,
- struct inode *inode)
+ struct inode *inode, __u32 mask)
{
struct fsnotify_mark *fsn_mark;
+ __u32 added;
pr_debug("%s: group=%p inode=%p\n", __func__, group, inode);
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark) {
- struct fsnotify_mark *new_fsn_mark;
int ret;
- fsn_mark = ERR_PTR(-ENOMEM);
- new_fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
- if (!new_fsn_mark)
- goto out;
+ fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
+ if (!fsn_mark)
+ return ERR_PTR(-ENOMEM);
- fsnotify_init_mark(new_fsn_mark, fanotify_free_mark);
- ret = fsnotify_add_mark(new_fsn_mark, group, inode, NULL, 0);
+ fsnotify_init_mark(fsn_mark, fanotify_free_mark);
+ ret = fsnotify_add_mark(fsn_mark, group, inode, NULL, 0);
if (ret) {
- fsn_mark = ERR_PTR(ret);
- fanotify_free_mark(new_fsn_mark);
- goto out;
+ fanotify_free_mark(fsn_mark);
+ return ERR_PTR(ret);
}
-
- fsn_mark = new_fsn_mark;
}
-out:
+ added = fanotify_mark_add_to_mask(fsn_mark, mask);
+ if (added) {
+ if (added & ~group->mask)
+ fsnotify_recalc_group_mask(group);
+ if (added & ~inode->i_fsnotify_mask)
+ fsnotify_recalc_inode_mask(inode);
+ }
return fsn_mark;
}
static int fanotify_add_mark(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, unsigned int flags, __u32 mask)
+ struct vfsmount *mnt, __u32 mask)
{
struct fsnotify_mark *fsn_mark;
- pr_debug("%s: group=%p inode=%p mnt=%p flags=%x mask=%x\n",
- __func__, group, inode, mnt, flags, mask);
+ pr_debug("%s: group=%p inode=%p mnt=%p mask=%x\n",
+ __func__, group, inode, mnt, mask);
BUG_ON(inode && mnt);
BUG_ON(!inode && !mnt);
if (inode)
- fsn_mark = fanotify_add_inode_mark(group, inode);
+ fsn_mark = fanotify_add_inode_mark(group, inode, mask);
else if (mnt)
- fsn_mark = fanotify_add_vfsmount_mark(group, mnt);
+ fsn_mark = fanotify_add_vfsmount_mark(group, mnt, mask);
else
BUG();
if (IS_ERR(fsn_mark))
goto out;
- fanotify_update_object_mask(group, inode, mnt, fsn_mark, flags, mask);
-
/* match the init or the find.... */
fsnotify_put_mark(fsn_mark);
out:
@@ -590,7 +546,7 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
/* create/update an inode mark */
switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
case FAN_MARK_ADD:
- ret = fanotify_add_mark(group, inode, NULL, flags, mask);
+ ret = fanotify_add_mark(group, inode, NULL, mask);
break;
case FAN_MARK_REMOVE:
ret = fanotify_remove_mark(group, inode, NULL, mask);
--
GitLab
From 52202dfbd9107787dc68a2019cc7be4e79f52e5c Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:28 -0500
Subject: [PATCH 116/863] fanotify: do not return pointer from
fanotify_add_*_mark
No need to return the mark from fanotify_add_*_mark to fanotify_add_mark
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 36 +++++++++++++-----------------
1 file changed, 16 insertions(+), 20 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index db7467782e8cd..7d7c13872852c 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -358,8 +358,8 @@ static __u32 fanotify_mark_add_to_mask(struct fsnotify_mark *fsn_mark, __u32 mas
return mask & ~oldmask;
}
-static struct fsnotify_mark *fanotify_add_vfsmount_mark(struct fsnotify_group *group,
- struct vfsmount *mnt, __u32 mask)
+static int fanotify_add_vfsmount_mark(struct fsnotify_group *group,
+ struct vfsmount *mnt, __u32 mask)
{
struct fsnotify_mark *fsn_mark;
__u32 added;
@@ -370,27 +370,28 @@ static struct fsnotify_mark *fanotify_add_vfsmount_mark(struct fsnotify_group *g
fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
if (!fsn_mark)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
fsnotify_init_mark(fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(fsn_mark, group, NULL, mnt, 0);
if (ret) {
fanotify_free_mark(fsn_mark);
- return ERR_PTR(ret);
+ return ret;
}
}
added = fanotify_mark_add_to_mask(fsn_mark, mask);
+ fsnotify_put_mark(fsn_mark);
if (added) {
if (added & ~group->mask)
fsnotify_recalc_group_mask(group);
if (added & ~mnt->mnt_fsnotify_mask)
fsnotify_recalc_vfsmount_mask(mnt);
}
- return fsn_mark;
+ return 0;
}
-static struct fsnotify_mark *fanotify_add_inode_mark(struct fsnotify_group *group,
- struct inode *inode, __u32 mask)
+static int fanotify_add_inode_mark(struct fsnotify_group *group,
+ struct inode *inode, __u32 mask)
{
struct fsnotify_mark *fsn_mark;
__u32 added;
@@ -403,29 +404,30 @@ static struct fsnotify_mark *fanotify_add_inode_mark(struct fsnotify_group *grou
fsn_mark = kmem_cache_alloc(fanotify_mark_cache, GFP_KERNEL);
if (!fsn_mark)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
fsnotify_init_mark(fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(fsn_mark, group, inode, NULL, 0);
if (ret) {
fanotify_free_mark(fsn_mark);
- return ERR_PTR(ret);
+ return ret;
}
}
added = fanotify_mark_add_to_mask(fsn_mark, mask);
+ fsnotify_put_mark(fsn_mark);
if (added) {
if (added & ~group->mask)
fsnotify_recalc_group_mask(group);
if (added & ~inode->i_fsnotify_mask)
fsnotify_recalc_inode_mask(inode);
}
- return fsn_mark;
+ return 0;
}
static int fanotify_add_mark(struct fsnotify_group *group, struct inode *inode,
struct vfsmount *mnt, __u32 mask)
{
- struct fsnotify_mark *fsn_mark;
+ int ret;
pr_debug("%s: group=%p inode=%p mnt=%p mask=%x\n",
__func__, group, inode, mnt, mask);
@@ -434,19 +436,13 @@ static int fanotify_add_mark(struct fsnotify_group *group, struct inode *inode,
BUG_ON(!inode && !mnt);
if (inode)
- fsn_mark = fanotify_add_inode_mark(group, inode, mask);
+ ret = fanotify_add_inode_mark(group, inode, mask);
else if (mnt)
- fsn_mark = fanotify_add_vfsmount_mark(group, mnt, mask);
+ ret = fanotify_add_vfsmount_mark(group, mnt, mask);
else
BUG();
- if (IS_ERR(fsn_mark))
- goto out;
-
- /* match the init or the find.... */
- fsnotify_put_mark(fsn_mark);
-out:
- return PTR_ERR(fsn_mark);
+ return ret;
}
static bool fanotify_mark_validate_input(int flags,
--
GitLab
From 90dd201d1ab064512078a77762a793e0bf5f3040 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:28 -0500
Subject: [PATCH 117/863] fanotify: remove fanotify_add_mark
fanotify_add_mark now does nothing useful anymore, drop it.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 23 +----------------------
1 file changed, 1 insertion(+), 22 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 7d7c13872852c..db80a0d89d24b 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -424,27 +424,6 @@ static int fanotify_add_inode_mark(struct fsnotify_group *group,
return 0;
}
-static int fanotify_add_mark(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, __u32 mask)
-{
- int ret;
-
- pr_debug("%s: group=%p inode=%p mnt=%p mask=%x\n",
- __func__, group, inode, mnt, mask);
-
- BUG_ON(inode && mnt);
- BUG_ON(!inode && !mnt);
-
- if (inode)
- ret = fanotify_add_inode_mark(group, inode, mask);
- else if (mnt)
- ret = fanotify_add_vfsmount_mark(group, mnt, mask);
- else
- BUG();
-
- return ret;
-}
-
static bool fanotify_mark_validate_input(int flags,
__u32 mask)
{
@@ -542,7 +521,7 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
/* create/update an inode mark */
switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
case FAN_MARK_ADD:
- ret = fanotify_add_mark(group, inode, NULL, mask);
+ ret = fanotify_add_inode_mark(group, inode, mask);
break;
case FAN_MARK_REMOVE:
ret = fanotify_remove_mark(group, inode, NULL, mask);
--
GitLab
From 0ff21db9fcc39042b814dad8a4b7508710a75235 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:29 -0500
Subject: [PATCH 118/863] fanotify: hooks the fanotify_mark syscall to the
vfsmount code
Create a new fanotify_mark flag which indicates we should attach the mark
to the vfsmount holding the object referenced by dfd and pathname rather
than the inode itself.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 15 +++++++++++----
include/linux/fanotify.h | 4 +++-
2 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index db80a0d89d24b..81267260d1b9c 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -485,7 +485,8 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
__u64 mask, int dfd,
const char __user * pathname)
{
- struct inode *inode;
+ struct inode *inode = NULL;
+ struct vfsmount *mnt = NULL;
struct fsnotify_group *group;
struct file *filp;
struct path path;
@@ -515,16 +516,22 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
goto fput_and_out;
/* inode held in place by reference to path; group by fget on fd */
- inode = path.dentry->d_inode;
+ if (!(flags & FAN_MARK_ON_VFSMOUNT))
+ inode = path.dentry->d_inode;
+ else
+ mnt = path.mnt;
group = filp->private_data;
/* create/update an inode mark */
switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
case FAN_MARK_ADD:
- ret = fanotify_add_inode_mark(group, inode, mask);
+ if (flags & FAN_MARK_ON_VFSMOUNT)
+ ret = fanotify_add_vfsmount_mark(group, mnt, mask);
+ else
+ ret = fanotify_add_inode_mark(group, inode, mask);
break;
case FAN_MARK_REMOVE:
- ret = fanotify_remove_mark(group, inode, NULL, mask);
+ ret = fanotify_remove_mark(group, inode, mnt, mask);
break;
default:
ret = -EINVAL;
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 5f633af4d1b0d..e25d348188ca6 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -29,11 +29,13 @@
#define FAN_MARK_REMOVE 0x00000002
#define FAN_MARK_DONT_FOLLOW 0x00000004
#define FAN_MARK_ONLYDIR 0x00000008
+#define FAN_MARK_ON_VFSMOUNT 0x00000010
#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
FAN_MARK_REMOVE |\
FAN_MARK_DONT_FOLLOW |\
- FAN_MARK_ONLYDIR)
+ FAN_MARK_ONLYDIR |\
+ FAN_MARK_ON_VFSMOUNT)
/*
* All of the events - we build the list by hand so that we can add flags in
--
GitLab
From eac8e9e80ccbd30801b7b76a2ee4c6c5a681e53c Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:29 -0500
Subject: [PATCH 119/863] fanotify: rename FAN_MARK_ON_VFSMOUNT to
FAN_MARK_MOUNT
the term 'vfsmount' isn't sensicle to userspace. instead call is 'mount.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 4 ++--
include/linux/fanotify.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 81267260d1b9c..091371e1bde34 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -516,7 +516,7 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
goto fput_and_out;
/* inode held in place by reference to path; group by fget on fd */
- if (!(flags & FAN_MARK_ON_VFSMOUNT))
+ if (!(flags & FAN_MARK_MOUNT))
inode = path.dentry->d_inode;
else
mnt = path.mnt;
@@ -525,7 +525,7 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
/* create/update an inode mark */
switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
case FAN_MARK_ADD:
- if (flags & FAN_MARK_ON_VFSMOUNT)
+ if (flags & FAN_MARK_MOUNT)
ret = fanotify_add_vfsmount_mark(group, mnt, mask);
else
ret = fanotify_add_inode_mark(group, inode, mask);
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index e25d348188ca6..5ee22fb274e56 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -29,13 +29,13 @@
#define FAN_MARK_REMOVE 0x00000002
#define FAN_MARK_DONT_FOLLOW 0x00000004
#define FAN_MARK_ONLYDIR 0x00000008
-#define FAN_MARK_ON_VFSMOUNT 0x00000010
+#define FAN_MARK_MOUNT 0x00000010
#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
FAN_MARK_REMOVE |\
FAN_MARK_DONT_FOLLOW |\
FAN_MARK_ONLYDIR |\
- FAN_MARK_ON_VFSMOUNT)
+ FAN_MARK_MOUNT)
/*
* All of the events - we build the list by hand so that we can add flags in
--
GitLab
From f3640192c0a177506ec08ab07ed3178b912574da Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:29 -0500
Subject: [PATCH 120/863] fanotify: split fanotify_remove_mark
split fanotify_remove_mark into fanotify_remove_inode_mark and
fanotify_remove_vfsmount_mark.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 45 ++++++++++++++++++------------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 091371e1bde34..00628d3ce5a23 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -310,22 +310,33 @@ static __u32 fanotify_mark_remove_from_mask(struct fsnotify_mark *fsn_mark, __u3
return mask & oldmask;
}
-static int fanotify_remove_mark(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, __u32 mask)
+static int fanotify_remove_vfsmount_mark(struct fsnotify_group *group,
+ struct vfsmount *mnt, __u32 mask)
{
struct fsnotify_mark *fsn_mark = NULL;
__u32 removed;
- BUG_ON(inode && mnt);
- BUG_ON(!inode && !mnt);
+ fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
+ if (!fsn_mark)
+ return -ENOENT;
- if (inode)
- fsn_mark = fsnotify_find_inode_mark(group, inode);
- else if (mnt)
- fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
- else
- BUG();
+ removed = fanotify_mark_remove_from_mask(fsn_mark, mask);
+ fsnotify_put_mark(fsn_mark);
+ if (removed & group->mask)
+ fsnotify_recalc_group_mask(group);
+ if (removed & mnt->mnt_fsnotify_mask)
+ fsnotify_recalc_vfsmount_mask(mnt);
+
+ return 0;
+}
+static int fanotify_remove_inode_mark(struct fsnotify_group *group,
+ struct inode *inode, __u32 mask)
+{
+ struct fsnotify_mark *fsn_mark = NULL;
+ __u32 removed;
+
+ fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
return -ENOENT;
@@ -335,13 +346,8 @@ static int fanotify_remove_mark(struct fsnotify_group *group, struct inode *inod
if (removed & group->mask)
fsnotify_recalc_group_mask(group);
- if (inode) {
- if (removed & inode->i_fsnotify_mask)
- fsnotify_recalc_inode_mask(inode);
- } else if (mnt) {
- if (removed & mnt->mnt_fsnotify_mask)
- fsnotify_recalc_vfsmount_mask(mnt);
- }
+ if (removed & inode->i_fsnotify_mask)
+ fsnotify_recalc_inode_mask(inode);
return 0;
}
@@ -531,7 +537,10 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
ret = fanotify_add_inode_mark(group, inode, mask);
break;
case FAN_MARK_REMOVE:
- ret = fanotify_remove_mark(group, inode, mnt, mask);
+ if (flags & FAN_MARK_MOUNT)
+ ret = fanotify_remove_vfsmount_mark(group, mnt, mask);
+ else
+ ret = fanotify_remove_inode_mark(group, inode, mask);
break;
default:
ret = -EINVAL;
--
GitLab
From 88380fe66e0ac22529f5426ab27d67da00ed2628 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:29 -0500
Subject: [PATCH 121/863] fanotify: remove fanotify.h declarations
fanotify_mark_validate functions are all needlessly declared in headers as
static inlines. Instead just do the checks where they are needed for code
readability.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.h | 25 -------------------------
fs/notify/fanotify/fanotify_user.c | 25 ++++++++++---------------
include/linux/fanotify.h | 7 -------
3 files changed, 10 insertions(+), 47 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.h b/fs/notify/fanotify/fanotify.h
index 5608783c6bca6..4d5723a74a8e3 100644
--- a/fs/notify/fanotify/fanotify.h
+++ b/fs/notify/fanotify/fanotify.h
@@ -6,31 +6,6 @@
extern const struct fsnotify_ops fanotify_fsnotify_ops;
-static inline bool fanotify_mark_flags_valid(unsigned int flags)
-{
- /* must be either and add or a remove */
- if (!(flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)))
- return false;
-
- /* cannot be both add and remove */
- if ((flags & FAN_MARK_ADD) &&
- (flags & FAN_MARK_REMOVE))
- return false;
-
- /* cannot have more flags than we know about */
- if (flags & ~FAN_ALL_MARK_FLAGS)
- return false;
-
- return true;
-}
-
-static inline bool fanotify_mask_valid(__u32 mask)
-{
- if (mask & ~((__u32)FAN_ALL_INCOMING_EVENTS))
- return false;
- return true;
-}
-
static inline __u32 fanotify_outgoing_mask(__u32 mask)
{
return mask & FAN_ALL_OUTGOING_EVENTS;
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 00628d3ce5a23..618867e4d30f6 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -430,20 +430,6 @@ static int fanotify_add_inode_mark(struct fsnotify_group *group,
return 0;
}
-static bool fanotify_mark_validate_input(int flags,
- __u32 mask)
-{
- pr_debug("%s: flags=%x mask=%x\n", __func__, flags, mask);
-
- /* are flags valid of this operation? */
- if (!fanotify_mark_flags_valid(flags))
- return false;
- /* is the mask valid? */
- if (!fanotify_mask_valid(mask))
- return false;
- return true;
-}
-
/* fanotify syscalls */
SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
unsigned int, priority)
@@ -505,7 +491,16 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
if (mask & ((__u64)0xffffffff << 32))
return -EINVAL;
- if (!fanotify_mark_validate_input(flags, mask))
+ if (flags & ~FAN_ALL_MARK_FLAGS)
+ return -EINVAL;
+ switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
+ case FAN_MARK_ADD:
+ case FAN_MARK_REMOVE:
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (mask & ~(FAN_ALL_EVENTS | FAN_EVENT_ON_CHILD))
return -EINVAL;
filp = fget_light(fanotify_fd, &fput_needed);
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 5ee22fb274e56..90e59b24fd04b 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -47,13 +47,6 @@
FAN_CLOSE |\
FAN_OPEN)
-/*
- * All legal FAN bits userspace can request (although possibly not all
- * at the same time.
- */
-#define FAN_ALL_INCOMING_EVENTS (FAN_ALL_EVENTS |\
- FAN_EVENT_ON_CHILD)
-
#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\
FAN_Q_OVERFLOW)
--
GitLab
From 33d3dfff451a2ab6fe2f6aaabed9b24e91aad109 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Thu, 17 Dec 2009 21:24:29 -0500
Subject: [PATCH 122/863] fanotify: remove outgoing function checks in
fanotify.h
A number of validity checks on outgoing data are done in static inlines but
are only used in one place. Instead just do them where they are used for
readability.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 3 +--
fs/notify/fanotify/fanotify.h | 12 ------------
fs/notify/fanotify/fanotify_user.c | 5 +++--
3 files changed, 4 insertions(+), 16 deletions(-)
delete mode 100644 fs/notify/fanotify/fanotify.h
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 202be8adb2ec6..f6900022f69e3 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -1,3 +1,4 @@
+#include <linux/fanotify.h>
#include <linux/fdtable.h>
#include <linux/fsnotify_backend.h>
#include <linux/init.h>
@@ -5,8 +6,6 @@
#include <linux/mount.h>
#include <linux/types.h>
-#include "fanotify.h"
-
static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
{
pr_debug("%s: old=%p new=%p\n", __func__, old, new);
diff --git a/fs/notify/fanotify/fanotify.h b/fs/notify/fanotify/fanotify.h
deleted file mode 100644
index 4d5723a74a8e3..0000000000000
--- a/fs/notify/fanotify/fanotify.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/fanotify.h>
-#include <linux/fsnotify_backend.h>
-#include <linux/net.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-extern const struct fsnotify_ops fanotify_fsnotify_ops;
-
-static inline __u32 fanotify_outgoing_mask(__u32 mask)
-{
- return mask & FAN_ALL_OUTGOING_EVENTS;
-}
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 618867e4d30f6..84155841a0256 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -1,3 +1,4 @@
+#include <linux/fanotify.h>
#include <linux/fcntl.h>
#include <linux/file.h>
#include <linux/fs.h>
@@ -14,7 +15,7 @@
#include <asm/ioctls.h>
-#include "fanotify.h"
+extern const struct fsnotify_ops fanotify_fsnotify_ops;
static struct kmem_cache *fanotify_mark_cache __read_mostly;
@@ -102,7 +103,7 @@ static ssize_t fill_event_metadata(struct fsnotify_group *group,
metadata->event_len = FAN_EVENT_METADATA_LEN;
metadata->vers = FANOTIFY_METADATA_VERSION;
- metadata->mask = fanotify_outgoing_mask(event->mask);
+ metadata->mask = event->mask & FAN_ALL_OUTGOING_EVENTS;
metadata->pid = pid_vnr(event->tgid);
metadata->fd = create_fd(group, event);
--
GitLab
From 90b1e7a57880fb66437ab7db39e1e65ca0372822 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:33 -0500
Subject: [PATCH 123/863] fsnotify: allow marks to not pin inodes in core
inotify marks must pin inodes in core. dnotify doesn't technically need to
since they are closed when the directory is closed. fanotify also need to
pin inodes in core as it works today. But the next step is to introduce
the concept of 'ignored masks' which is actually a mask of events for an
inode of no interest. I claim that these should be liberally sent to the
kernel and should not pin the inode in core. If the inode is brought back
in the listener will get an event it may have thought excluded, but this is
not a serious situation and one any listener should deal with.
This patch lays the ground work for non-pinning inode marks by using lazy
inode pinning. We do not pin a mark until it has a non-zero mask entry. If a
listener new sets a mask we never pin the inode.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 2 +-
fs/notify/fanotify/fanotify_user.c | 4 ++--
fs/notify/fsnotify.h | 2 ++
fs/notify/inode_mark.c | 35 +++++++++++++++++++++++-------
fs/notify/inotify/inotify_user.c | 12 +++++-----
fs/notify/mark.c | 17 ++++++++++++++-
include/linux/fsnotify_backend.h | 7 ++++--
7 files changed, 58 insertions(+), 21 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 69f42df9ba457..6624c2ee8786f 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -65,7 +65,7 @@ static void dnotify_recalc_inode_mask(struct fsnotify_mark *fsn_mark)
new_mask = 0;
for (dn = dn_mark->dn; dn != NULL; dn = dn->dn_next)
new_mask |= (dn->dn_mask & ~FS_DN_MULTISHOT);
- fsn_mark->mask = new_mask;
+ fsnotify_set_mark_mask_locked(fsn_mark, new_mask);
if (old_mask == new_mask)
return;
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 84155841a0256..3320f0c57e319 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -302,7 +302,7 @@ static __u32 fanotify_mark_remove_from_mask(struct fsnotify_mark *fsn_mark, __u3
spin_lock(&fsn_mark->lock);
oldmask = fsn_mark->mask;
- fsn_mark->mask = oldmask & ~mask;
+ fsnotify_set_mark_mask_locked(fsn_mark, (oldmask & ~mask));
spin_unlock(&fsn_mark->lock);
if (!(oldmask & ~mask))
@@ -359,7 +359,7 @@ static __u32 fanotify_mark_add_to_mask(struct fsnotify_mark *fsn_mark, __u32 mas
spin_lock(&fsn_mark->lock);
oldmask = fsn_mark->mask;
- fsn_mark->mask = oldmask | mask;
+ fsnotify_set_mark_mask_locked(fsn_mark, (oldmask | mask));
spin_unlock(&fsn_mark->lock);
return mask & ~oldmask;
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index 204353c0f6639..1be54f6f9e7d7 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -20,6 +20,8 @@ extern __u32 fsnotify_vfsmount_mask;
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
+extern void fsnotify_set_inode_mark_mask_locked(struct fsnotify_mark *fsn_mark,
+ __u32 mask);
/* add a mark to an inode */
extern int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
struct fsnotify_group *group, struct inode *inode,
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index c925579ba0116..4292f9e23ae85 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -141,7 +141,32 @@ struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group,
}
/*
- * Attach an initialized mark mark to a given group and inode.
+ * If we are setting a mark mask on an inode mark we should pin the inode
+ * in memory.
+ */
+void fsnotify_set_inode_mark_mask_locked(struct fsnotify_mark *mark,
+ __u32 mask)
+{
+ struct inode *inode;
+
+ assert_spin_locked(&mark->lock);
+
+ if (mask &&
+ mark->i.inode &&
+ !(mark->flags & FSNOTIFY_MARK_FLAG_OBJECT_PINNED)) {
+ mark->flags |= FSNOTIFY_MARK_FLAG_OBJECT_PINNED;
+ inode = igrab(mark->i.inode);
+ /*
+ * we shouldn't be able to get here if the inode wasn't
+ * already safely held in memory. But bug in case it
+ * ever is wrong.
+ */
+ BUG_ON(!inode);
+ }
+}
+
+/*
+ * Attach an initialized mark to a given group and inode.
* These marks may be used for the fsnotify backend to determine which
* event types should be delivered to which group and for which inodes.
*/
@@ -152,10 +177,6 @@ int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
struct fsnotify_mark *lmark = NULL;
int ret = 0;
- inode = igrab(inode);
- if (unlikely(!inode))
- return -EINVAL;
-
mark->flags = FSNOTIFY_MARK_FLAG_INODE;
assert_spin_locked(&mark->lock);
@@ -175,10 +196,8 @@ int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
spin_unlock(&inode->i_lock);
- if (lmark) {
+ if (lmark)
ret = -EEXIST;
- iput(inode);
- }
return ret;
}
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index a12315a7553dd..19d274057bfa1 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -575,13 +575,11 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
spin_lock(&fsn_mark->lock);
old_mask = fsn_mark->mask;
- if (add) {
- fsn_mark->mask |= mask;
- new_mask = fsn_mark->mask;
- } else {
- fsn_mark->mask = mask;
- new_mask = fsn_mark->mask;
- }
+ if (add)
+ fsnotify_set_mark_mask_locked(fsn_mark, (fsn_mark->mask | mask));
+ else
+ fsnotify_set_mark_mask_locked(fsn_mark, mask);
+ new_mask = fsn_mark->mask;
spin_unlock(&fsn_mark->lock);
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index d296ec9ffb2a0..0ebc3fd7089bb 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -168,7 +168,7 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
* is just a lazy update (and could be a perf win...)
*/
- if (inode)
+ if (inode && (mark->flags & FSNOTIFY_MARK_FLAG_OBJECT_PINNED))
iput(inode);
/*
@@ -180,6 +180,17 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
fsnotify_final_destroy_group(group);
}
+void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask)
+{
+ assert_spin_locked(&mark->lock);
+
+ mark->mask = mask;
+
+ if (mark->flags & FSNOTIFY_MARK_FLAG_INODE)
+ fsnotify_set_inode_mark_mask_locked(mark, mask);
+}
+
+
/*
* Attach an initialized mark to a given group and fs object.
* These marks may be used for the fsnotify backend to determine which
@@ -230,6 +241,10 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
}
spin_unlock(&group->mark_lock);
+
+ /* this will pin the object if appropriate */
+ fsnotify_set_mark_mask_locked(mark, mark->mask);
+
spin_unlock(&mark->lock);
if (inode)
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 2d2f015fb7002..489c881ed4ec4 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -267,8 +267,9 @@ struct fsnotify_mark {
struct fsnotify_vfsmount_mark m;
};
struct list_head free_g_list; /* tmp list used when freeing this mark */
-#define FSNOTIFY_MARK_FLAG_INODE 0x01
-#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
+#define FSNOTIFY_MARK_FLAG_INODE 0x01
+#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
+#define FSNOTIFY_MARK_FLAG_OBJECT_PINNED 0x04
unsigned int flags; /* vfsmount or inode mark? */
void (*free_mark)(struct fsnotify_mark *mark); /* called on final put+free */
};
@@ -372,6 +373,8 @@ extern struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *gro
extern struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group, struct vfsmount *mnt);
/* copy the values from old into new */
extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
+/* set the mask of a mark (might pin the object into memory */
+extern void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask);
/* attach the mark to both the group and the inode */
extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct fsnotify_group *group,
struct inode *inode, struct vfsmount *mnt, int allow_dups);
--
GitLab
From 33af5e32e0bb73c704b5e156f4411cdb53e6cc59 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:33 -0500
Subject: [PATCH 124/863] fsnotify: ignored_mask - excluding notification
The ignored_mask is a new mask which is part of fsnotify marks. A group's
should_send_event() function can use the ignored mask to determine that
certain events are not of interest. In particular if a group registers a
mask including FS_OPEN on a vfsmount they could add FS_OPEN to the
ignored_mask for individual inodes and not send open events for those
inodes.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/mark.c | 6 ++++++
include/linux/fsnotify_backend.h | 3 +++
2 files changed, 9 insertions(+)
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 0ebc3fd7089bb..cb1d822f227fe 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -190,6 +190,12 @@ void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask)
fsnotify_set_inode_mark_mask_locked(mark, mask);
}
+void fsnotify_set_mark_ignored_mask_locked(struct fsnotify_mark *mark, __u32 mask)
+{
+ assert_spin_locked(&mark->lock);
+
+ mark->ignored_mask = mask;
+}
/*
* Attach an initialized mark to a given group and fs object.
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 489c881ed4ec4..018416ec5ce40 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -266,6 +266,7 @@ struct fsnotify_mark {
struct fsnotify_inode_mark i;
struct fsnotify_vfsmount_mark m;
};
+ __u32 ignored_mask; /* events types to ignore */
struct list_head free_g_list; /* tmp list used when freeing this mark */
#define FSNOTIFY_MARK_FLAG_INODE 0x01
#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
@@ -373,6 +374,8 @@ extern struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *gro
extern struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group, struct vfsmount *mnt);
/* copy the values from old into new */
extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
+/* set the ignored_mask of a mark */
+extern void fsnotify_set_mark_ignored_mask_locked(struct fsnotify_mark *mark, __u32 mask);
/* set the mask of a mark (might pin the object into memory */
extern void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask);
/* attach the mark to both the group and the inode */
--
GitLab
From 32a4df13b88afef2a7d869bb7586a7beba90961f Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:33 -0500
Subject: [PATCH 125/863] fanotify: ignored_mask to ignore events
When fanotify receives an event it will check event->mask & ~ignored_mask.
If no bits are left the event will not be sent.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 37 ++++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 14 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index f6900022f69e3..060b177146e84 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -100,31 +100,39 @@ static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_e
}
static bool should_send_vfsmount_event(struct fsnotify_group *group, struct vfsmount *mnt,
- __u32 mask)
+ struct inode *inode, __u32 mask)
{
- struct fsnotify_mark *fsn_mark;
- bool send;
+ struct fsnotify_mark *mnt_mark;
+ struct fsnotify_mark *inode_mark;
pr_debug("%s: group=%p vfsmount=%p mask=%x\n",
__func__, group, mnt, mask);
- fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
- if (!fsn_mark)
+ mnt_mark = fsnotify_find_vfsmount_mark(group, mnt);
+ if (!mnt_mark)
return false;
- send = (mask & fsn_mark->mask);
+ mask &= mnt_mark->mask;
+ mask &= ~mnt_mark->ignored_mask;
+
+ if (mask) {
+ inode_mark = fsnotify_find_inode_mark(group, inode);
+ if (inode_mark) {
+ mask &= ~inode_mark->ignored_mask;
+ fsnotify_put_mark(inode_mark);
+ }
+ }
/* find took a reference */
- fsnotify_put_mark(fsn_mark);
+ fsnotify_put_mark(mnt_mark);
- return send;
+ return mask;
}
static bool should_send_inode_event(struct fsnotify_group *group, struct inode *inode,
__u32 mask)
{
struct fsnotify_mark *fsn_mark;
- bool send;
pr_debug("%s: group=%p inode=%p mask=%x\n",
__func__, group, inode, mask);
@@ -137,20 +145,21 @@ static bool should_send_inode_event(struct fsnotify_group *group, struct inode *
* events on the child, don't send it! */
if ((mask & FS_EVENT_ON_CHILD) &&
!(fsn_mark->mask & FS_EVENT_ON_CHILD)) {
- send = false;
+ mask = 0;
} else {
/*
* We care about children, but do we care about this particular
* type of event?
*/
- mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (fsn_mark->mask & mask);
+ mask &= ~FS_EVENT_ON_CHILD;
+ mask &= fsn_mark->mask;
+ mask &= ~fsn_mark->ignored_mask;
}
/* find took a reference */
fsnotify_put_mark(fsn_mark);
- return send;
+ return mask;
}
static bool fanotify_should_send_event(struct fsnotify_group *group, struct inode *to_tell,
@@ -170,7 +179,7 @@ static bool fanotify_should_send_event(struct fsnotify_group *group, struct inod
return false;
if (mnt)
- return should_send_vfsmount_event(group, mnt, mask);
+ return should_send_vfsmount_event(group, mnt, to_tell, mask);
else
return should_send_inode_event(group, to_tell, mask);
}
--
GitLab
From b9e4e3bd0495fea9e8f8e712889c9cd8ffa43c94 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:33 -0500
Subject: [PATCH 126/863] fanotify: allow users to set an ignored_mask
Change the sys_fanotify_mark() system call so users can set ignored_masks
on inodes. Remember, if a user new sets a real mask, and only sets ignored
masks, the ignore will never be pinned in memory. Thus ignored_masks can
be lost under memory pressure and the user may again get events they
previously thought were ignored.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 54 ++++++++++++++++++++----------
include/linux/fanotify.h | 4 ++-
2 files changed, 39 insertions(+), 19 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 3320f0c57e319..ad02d475770f0 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -296,13 +296,20 @@ static int fanotify_find_path(int dfd, const char __user *filename,
return ret;
}
-static __u32 fanotify_mark_remove_from_mask(struct fsnotify_mark *fsn_mark, __u32 mask)
+static __u32 fanotify_mark_remove_from_mask(struct fsnotify_mark *fsn_mark,
+ __u32 mask,
+ unsigned int flags)
{
__u32 oldmask;
spin_lock(&fsn_mark->lock);
- oldmask = fsn_mark->mask;
- fsnotify_set_mark_mask_locked(fsn_mark, (oldmask & ~mask));
+ if (!(flags & FAN_MARK_IGNORED_MASK)) {
+ oldmask = fsn_mark->mask;
+ fsnotify_set_mark_mask_locked(fsn_mark, (oldmask & ~mask));
+ } else {
+ oldmask = fsn_mark->ignored_mask;
+ fsnotify_set_mark_ignored_mask_locked(fsn_mark, (oldmask & ~mask));
+ }
spin_unlock(&fsn_mark->lock);
if (!(oldmask & ~mask))
@@ -312,7 +319,8 @@ static __u32 fanotify_mark_remove_from_mask(struct fsnotify_mark *fsn_mark, __u3
}
static int fanotify_remove_vfsmount_mark(struct fsnotify_group *group,
- struct vfsmount *mnt, __u32 mask)
+ struct vfsmount *mnt, __u32 mask,
+ unsigned int flags)
{
struct fsnotify_mark *fsn_mark = NULL;
__u32 removed;
@@ -321,7 +329,7 @@ static int fanotify_remove_vfsmount_mark(struct fsnotify_group *group,
if (!fsn_mark)
return -ENOENT;
- removed = fanotify_mark_remove_from_mask(fsn_mark, mask);
+ removed = fanotify_mark_remove_from_mask(fsn_mark, mask, flags);
fsnotify_put_mark(fsn_mark);
if (removed & group->mask)
fsnotify_recalc_group_mask(group);
@@ -332,7 +340,8 @@ static int fanotify_remove_vfsmount_mark(struct fsnotify_group *group,
}
static int fanotify_remove_inode_mark(struct fsnotify_group *group,
- struct inode *inode, __u32 mask)
+ struct inode *inode, __u32 mask,
+ unsigned int flags)
{
struct fsnotify_mark *fsn_mark = NULL;
__u32 removed;
@@ -341,7 +350,7 @@ static int fanotify_remove_inode_mark(struct fsnotify_group *group,
if (!fsn_mark)
return -ENOENT;
- removed = fanotify_mark_remove_from_mask(fsn_mark, mask);
+ removed = fanotify_mark_remove_from_mask(fsn_mark, mask, flags);
/* matches the fsnotify_find_inode_mark() */
fsnotify_put_mark(fsn_mark);
@@ -353,20 +362,28 @@ static int fanotify_remove_inode_mark(struct fsnotify_group *group,
return 0;
}
-static __u32 fanotify_mark_add_to_mask(struct fsnotify_mark *fsn_mark, __u32 mask)
+static __u32 fanotify_mark_add_to_mask(struct fsnotify_mark *fsn_mark,
+ __u32 mask,
+ unsigned int flags)
{
__u32 oldmask;
spin_lock(&fsn_mark->lock);
- oldmask = fsn_mark->mask;
- fsnotify_set_mark_mask_locked(fsn_mark, (oldmask | mask));
+ if (!(flags & FAN_MARK_IGNORED_MASK)) {
+ oldmask = fsn_mark->mask;
+ fsnotify_set_mark_mask_locked(fsn_mark, (oldmask | mask));
+ } else {
+ oldmask = fsn_mark->ignored_mask;
+ fsnotify_set_mark_ignored_mask_locked(fsn_mark, (oldmask | mask));
+ }
spin_unlock(&fsn_mark->lock);
return mask & ~oldmask;
}
static int fanotify_add_vfsmount_mark(struct fsnotify_group *group,
- struct vfsmount *mnt, __u32 mask)
+ struct vfsmount *mnt, __u32 mask,
+ unsigned int flags)
{
struct fsnotify_mark *fsn_mark;
__u32 added;
@@ -386,7 +403,7 @@ static int fanotify_add_vfsmount_mark(struct fsnotify_group *group,
return ret;
}
}
- added = fanotify_mark_add_to_mask(fsn_mark, mask);
+ added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
fsnotify_put_mark(fsn_mark);
if (added) {
if (added & ~group->mask)
@@ -398,7 +415,8 @@ static int fanotify_add_vfsmount_mark(struct fsnotify_group *group,
}
static int fanotify_add_inode_mark(struct fsnotify_group *group,
- struct inode *inode, __u32 mask)
+ struct inode *inode, __u32 mask,
+ unsigned int flags)
{
struct fsnotify_mark *fsn_mark;
__u32 added;
@@ -420,7 +438,7 @@ static int fanotify_add_inode_mark(struct fsnotify_group *group,
return ret;
}
}
- added = fanotify_mark_add_to_mask(fsn_mark, mask);
+ added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
fsnotify_put_mark(fsn_mark);
if (added) {
if (added & ~group->mask)
@@ -528,15 +546,15 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
case FAN_MARK_ADD:
if (flags & FAN_MARK_MOUNT)
- ret = fanotify_add_vfsmount_mark(group, mnt, mask);
+ ret = fanotify_add_vfsmount_mark(group, mnt, mask, flags);
else
- ret = fanotify_add_inode_mark(group, inode, mask);
+ ret = fanotify_add_inode_mark(group, inode, mask, flags);
break;
case FAN_MARK_REMOVE:
if (flags & FAN_MARK_MOUNT)
- ret = fanotify_remove_vfsmount_mark(group, mnt, mask);
+ ret = fanotify_remove_vfsmount_mark(group, mnt, mask, flags);
else
- ret = fanotify_remove_inode_mark(group, inode, mask);
+ ret = fanotify_remove_inode_mark(group, inode, mask, flags);
break;
default:
ret = -EINVAL;
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 90e59b24fd04b..b8daa9f9b5605 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -30,12 +30,14 @@
#define FAN_MARK_DONT_FOLLOW 0x00000004
#define FAN_MARK_ONLYDIR 0x00000008
#define FAN_MARK_MOUNT 0x00000010
+#define FAN_MARK_IGNORED_MASK 0x00000020
#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
FAN_MARK_REMOVE |\
FAN_MARK_DONT_FOLLOW |\
FAN_MARK_ONLYDIR |\
- FAN_MARK_MOUNT)
+ FAN_MARK_MOUNT |\
+ FAN_MARK_IGNORED_MASK)
/*
* All of the events - we build the list by hand so that we can add flags in
--
GitLab
From e898386146deb49a0b45ff1887d9da149c003209 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:33 -0500
Subject: [PATCH 127/863] fsnotify: clear ignored mask on modify
On inode modification we clear the ignored mask for all of the marks on the
inode. This allows userspace to ignore accesses to inodes until there is
something different.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 7f14ddc3efc22..3ad940d0bac14 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -140,6 +140,33 @@ void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
}
EXPORT_SYMBOL_GPL(__fsnotify_parent);
+void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
+{
+ struct fsnotify_mark *mark;
+ struct hlist_node *node;
+
+ if (!hlist_empty(&inode->i_fsnotify_marks)) {
+ spin_lock(&inode->i_lock);
+ hlist_for_each_entry(mark, node, &inode->i_fsnotify_marks, i.i_list) {
+ mark->ignored_mask = 0;
+ }
+ spin_unlock(&inode->i_lock);
+ }
+
+ if (data_is == FSNOTIFY_EVENT_PATH) {
+ struct vfsmount *mnt;
+
+ mnt = ((struct path *)data)->mnt;
+ if (mnt && !hlist_empty(&mnt->mnt_fsnotify_marks)) {
+ spin_lock(&mnt->mnt_root->d_lock);
+ hlist_for_each_entry(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
+ mark->ignored_mask = 0;
+ }
+ spin_unlock(&mnt->mnt_root->d_lock);
+ }
+ }
+}
+
static void send_to_group(struct fsnotify_group *group, struct inode *to_tell,
struct vfsmount *mnt, __u32 mask, void *data,
int data_is, u32 cookie, const char *file_name,
@@ -170,6 +197,7 @@ static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
return (test_mask & mnt->mnt_fsnotify_mask);
}
+
/*
* This is the main call to fsnotify. The VFS calls into hook specific functions
* in linux/fsnotify.h. Those functions then in turn call here. Here will call
@@ -190,6 +218,9 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
list_empty(&fsnotify_vfsmount_groups))
return;
+ if (mask & FS_MODIFY)
+ __fsnotify_flush_ignored_mask(to_tell, data, data_is);
+
/* if none of the directed listeners or vfsmount listeners care */
if (!(test_mask & fsnotify_inode_mask) &&
!(test_mask & fsnotify_vfsmount_mask))
--
GitLab
From c908370fc1ac27fd7e1fc0f34c693047b26564ce Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:33 -0500
Subject: [PATCH 128/863] fsnotify: allow ignored_mask to survive modification
Some inodes a group may want to never hear about a set of events even if
the inode is modified. We add a new mark flag which indicates that these
marks should not have their ignored_mask cleared on modification.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 6 ++++--
include/linux/fsnotify_backend.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 3ad940d0bac14..54d58d5f72c1c 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -148,7 +148,8 @@ void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
if (!hlist_empty(&inode->i_fsnotify_marks)) {
spin_lock(&inode->i_lock);
hlist_for_each_entry(mark, node, &inode->i_fsnotify_marks, i.i_list) {
- mark->ignored_mask = 0;
+ if (!(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ mark->ignored_mask = 0;
}
spin_unlock(&inode->i_lock);
}
@@ -160,7 +161,8 @@ void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
if (mnt && !hlist_empty(&mnt->mnt_fsnotify_marks)) {
spin_lock(&mnt->mnt_root->d_lock);
hlist_for_each_entry(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
- mark->ignored_mask = 0;
+ if (!(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ mark->ignored_mask = 0;
}
spin_unlock(&mnt->mnt_root->d_lock);
}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 018416ec5ce40..8ca19df8a1713 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -271,6 +271,7 @@ struct fsnotify_mark {
#define FSNOTIFY_MARK_FLAG_INODE 0x01
#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
#define FSNOTIFY_MARK_FLAG_OBJECT_PINNED 0x04
+#define FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY 0x08
unsigned int flags; /* vfsmount or inode mark? */
void (*free_mark)(struct fsnotify_mark *mark); /* called on final put+free */
};
--
GitLab
From c9778a98e7440fb73e0d27b8155a688663a0d493 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:33 -0500
Subject: [PATCH 129/863] fanotify: allow ignored_masks to survive modify
Some users may want to truely ignore an inode even if it has been modified.
Say you are wanting a mount which contains a log file and you really don't
want any notification about that file. This patch allows the listener to
do that.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 2 ++
include/linux/fanotify.h | 4 +++-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index ad02d475770f0..3e275f17e7b75 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -375,6 +375,8 @@ static __u32 fanotify_mark_add_to_mask(struct fsnotify_mark *fsn_mark,
} else {
oldmask = fsn_mark->ignored_mask;
fsnotify_set_mark_ignored_mask_locked(fsn_mark, (oldmask | mask));
+ if (flags & FAN_MARK_IGNORED_SURV_MODIFY)
+ fsn_mark->flags |= FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY;
}
spin_unlock(&fsn_mark->lock);
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index b8daa9f9b5605..e43934d0b74c2 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -31,13 +31,15 @@
#define FAN_MARK_ONLYDIR 0x00000008
#define FAN_MARK_MOUNT 0x00000010
#define FAN_MARK_IGNORED_MASK 0x00000020
+#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040
#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
FAN_MARK_REMOVE |\
FAN_MARK_DONT_FOLLOW |\
FAN_MARK_ONLYDIR |\
FAN_MARK_MOUNT |\
- FAN_MARK_IGNORED_MASK)
+ FAN_MARK_IGNORED_MASK |\
+ FAN_MARK_IGNORED_SURV_MODIFY)
/*
* All of the events - we build the list by hand so that we can add flags in
--
GitLab
From 4d92604cc90aa18bbbe0f6e23b7a9fdb612836d3 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:34 -0500
Subject: [PATCH 130/863] fanotify: clear all fanotify marks
fanotify listeners may want to clear all marks. They may want to do this
to destroy all of their inode marks which have nothing but ignores.
Realistically this is useful for av vendors who update policy and want to
clear all of their cached allows.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 12 ++++++++++--
fs/notify/inode_mark.c | 8 ++++++++
fs/notify/mark.c | 21 ++++++++++++++++-----
fs/notify/vfsmount_mark.c | 5 +++++
include/linux/fanotify.h | 1 +
include/linux/fsnotify_backend.h | 6 ++++++
6 files changed, 46 insertions(+), 7 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 3e275f17e7b75..9fe760baf69fc 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -514,9 +514,10 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
if (flags & ~FAN_ALL_MARK_FLAGS)
return -EINVAL;
- switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
+ switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
case FAN_MARK_ADD:
case FAN_MARK_REMOVE:
+ case FAN_MARK_FLUSH:
break;
default:
return -EINVAL;
@@ -545,7 +546,7 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
group = filp->private_data;
/* create/update an inode mark */
- switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE)) {
+ switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
case FAN_MARK_ADD:
if (flags & FAN_MARK_MOUNT)
ret = fanotify_add_vfsmount_mark(group, mnt, mask, flags);
@@ -558,6 +559,13 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
else
ret = fanotify_remove_inode_mark(group, inode, mask, flags);
break;
+ case FAN_MARK_FLUSH:
+ if (flags & FAN_MARK_MOUNT)
+ fsnotify_clear_vfsmount_marks_by_group(group);
+ else
+ fsnotify_clear_inode_marks_by_group(group);
+ fsnotify_recalc_group_mask(group);
+ break;
default:
ret = -EINVAL;
}
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 4292f9e23ae85..0c0a48b1659ff 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -103,6 +103,14 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
}
}
+/*
+ * Given a group clear all of the inode marks associated with that group.
+ */
+void fsnotify_clear_inode_marks_by_group(struct fsnotify_group *group)
+{
+ fsnotify_clear_marks_by_group_flags(group, FSNOTIFY_MARK_FLAG_INODE);
+}
+
/*
* given a group and inode, find the mark associated with that combination.
* if found take a reference to that mark and return it, else return NULL
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index cb1d822f227fe..1e824e64441d1 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -270,18 +270,21 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
}
/*
- * Given a group, destroy all of the marks associated with that group.
+ * clear any marks in a group in which mark->flags & flags is true
*/
-void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
+void fsnotify_clear_marks_by_group_flags(struct fsnotify_group *group,
+ unsigned int flags)
{
struct fsnotify_mark *lmark, *mark;
LIST_HEAD(free_list);
spin_lock(&group->mark_lock);
list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) {
- list_add(&mark->free_g_list, &free_list);
- list_del_init(&mark->g_list);
- fsnotify_get_mark(mark);
+ if (mark->flags & flags) {
+ list_add(&mark->free_g_list, &free_list);
+ list_del_init(&mark->g_list);
+ fsnotify_get_mark(mark);
+ }
}
spin_unlock(&group->mark_lock);
@@ -291,6 +294,14 @@ void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
}
}
+/*
+ * Given a group, destroy all of the marks associated with that group.
+ */
+void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
+{
+ fsnotify_clear_marks_by_group_flags(group, (unsigned int)-1);
+}
+
void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old)
{
assert_spin_locked(&old->lock);
diff --git a/fs/notify/vfsmount_mark.c b/fs/notify/vfsmount_mark.c
index 1b61d0a942de5..8f1aa02f4f02a 100644
--- a/fs/notify/vfsmount_mark.c
+++ b/fs/notify/vfsmount_mark.c
@@ -51,6 +51,11 @@ void fsnotify_clear_marks_by_mount(struct vfsmount *mnt)
}
}
+void fsnotify_clear_vfsmount_marks_by_group(struct fsnotify_group *group)
+{
+ fsnotify_clear_marks_by_group_flags(group, FSNOTIFY_MARK_FLAG_VFSMOUNT);
+}
+
/*
* Recalculate the mask of events relevant to a given vfsmount locked.
*/
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index e43934d0b74c2..385896c9f8289 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -32,6 +32,7 @@
#define FAN_MARK_MOUNT 0x00000010
#define FAN_MARK_IGNORED_MASK 0x00000020
#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040
+#define FAN_MARK_FLUSH 0x00000080
#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
FAN_MARK_REMOVE |\
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 8ca19df8a1713..be4a36ed20083 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -384,6 +384,12 @@ extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct fsnotify_group *
struct inode *inode, struct vfsmount *mnt, int allow_dups);
/* given a mark, flag it to be freed when all references are dropped */
extern void fsnotify_destroy_mark(struct fsnotify_mark *mark);
+/* run all the marks in a group, and clear all of the vfsmount marks */
+extern void fsnotify_clear_vfsmount_marks_by_group(struct fsnotify_group *group);
+/* run all the marks in a group, and clear all of the inode marks */
+extern void fsnotify_clear_inode_marks_by_group(struct fsnotify_group *group);
+/* run all the marks in a group, and clear all of the marks where mark->flags & flags is true*/
+extern void fsnotify_clear_marks_by_group_flags(struct fsnotify_group *group, unsigned int flags);
/* run all the marks in a group, and flag them to be freed */
extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
extern void fsnotify_get_mark(struct fsnotify_mark *mark);
--
GitLab
From cb2d429faf2cae62d3c51e28099a181d5fe8c244 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:34 -0500
Subject: [PATCH 131/863] fsnotify: add group priorities
This introduces an ordering to fsnotify groups. With purely asynchronous
notification based "things" implementing fsnotify (inotify, dnotify) ordering
isn't particularly important. But if people want to use fsnotify for the
basis of sycronous notification or blocking notification ordering becomes
important.
eg. A Hierarchical Storage Management listener would need to get its event
before an AV scanner could get its event (since the HSM would need to
bring the data in for the AV scanner to scan.) Typically asynchronous notification
would want to run after the AV scanner made any relevant access decisions
so as to not send notification about an event that was denied.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 4 +--
fs/notify/group.c | 40 ++++++++++++++++++++++++++++--
include/linux/fsnotify_backend.h | 1 +
3 files changed, 41 insertions(+), 4 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 9fe760baf69fc..84d3e2047de31 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -463,8 +463,6 @@ SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
if (event_f_flags)
return -EINVAL;
- if (priority)
- return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
@@ -483,6 +481,8 @@ SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
if (IS_ERR(group))
return PTR_ERR(group);
+ group->priority = priority;
+
fd = anon_inode_getfd("[fanotify]", &fanotify_fops, group, f_flags);
if (fd < 0)
goto out_put_group;
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 9e9eb406afdd4..ada913fd4f7fb 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -89,10 +89,27 @@ void fsnotify_recalc_group_mask(struct fsnotify_group *group)
void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
{
+ struct fsnotify_group *group_iter;
+ unsigned int priority = group->priority;
+
mutex_lock(&fsnotify_grp_mutex);
- if (!group->on_vfsmount_group_list)
+ if (!group->on_vfsmount_group_list) {
+ list_for_each_entry(group_iter, &fsnotify_vfsmount_groups,
+ vfsmount_group_list) {
+ /* insert in front of this one? */
+ if (priority < group_iter->priority) {
+ /* list_add_tail() insert in front of group_iter */
+ list_add_tail_rcu(&group->inode_group_list,
+ &group_iter->inode_group_list);
+ goto out;
+ }
+ }
+
+ /* apparently we need to be the last entry */
list_add_tail_rcu(&group->vfsmount_group_list, &fsnotify_vfsmount_groups);
+ }
+out:
group->on_vfsmount_group_list = 1;
mutex_unlock(&fsnotify_grp_mutex);
@@ -100,10 +117,27 @@ void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
void fsnotify_add_inode_group(struct fsnotify_group *group)
{
+ struct fsnotify_group *group_iter;
+ unsigned int priority = group->priority;
+
mutex_lock(&fsnotify_grp_mutex);
- if (!group->on_inode_group_list)
+ /* add to global group list, priority 0 first, UINT_MAX last */
+ if (!group->on_inode_group_list) {
+ list_for_each_entry(group_iter, &fsnotify_inode_groups,
+ inode_group_list) {
+ if (priority < group_iter->priority) {
+ /* list_add_tail() insert in front of group_iter */
+ list_add_tail_rcu(&group->inode_group_list,
+ &group_iter->inode_group_list);
+ goto out;
+ }
+ }
+
+ /* apparently we need to be the last entry */
list_add_tail_rcu(&group->inode_group_list, &fsnotify_inode_groups);
+ }
+out:
group->on_inode_group_list = 1;
mutex_unlock(&fsnotify_grp_mutex);
@@ -226,6 +260,8 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
spin_lock_init(&group->mark_lock);
INIT_LIST_HEAD(&group->marks_list);
+ group->priority = UINT_MAX;
+
group->ops = ops;
return group;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index be4a36ed20083..8b2e095e5907d 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -140,6 +140,7 @@ struct fsnotify_group {
* a group */
struct list_head marks_list; /* all inode marks for this group */
+ unsigned int priority; /* order of this group compared to others */
/* prevents double list_del of group_list. protected by global fsnotify_grp_mutex */
bool on_inode_group_list;
bool on_vfsmount_group_list;
--
GitLab
From 6e5f77b32e9097a8a68a8d453799676cacf70cad Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:34 -0500
Subject: [PATCH 132/863] fsnotify: intoduce a notification merge argument
Each group can define their own notification (and secondary_q) merge
function. Inotify does tail drop, fanotify does matching and drop which
can actually allocate a completely new event. But for fanotify to properly
deal with permissions events it needs to know the new event which was
ultimately added to the notification queue. This patch just implements a
void ** argument which is passed to the merge function. fanotify can use
this field to pass the new event back to higher layers.
Signed-off-by: Eric Paris <eparis@redhat.com>
for fanotify to properly deal with permissions events
---
fs/notify/fanotify/fanotify.c | 6 ++++--
fs/notify/inotify/inotify_fsnotify.c | 6 ++++--
fs/notify/inotify/inotify_user.c | 2 +-
fs/notify/notification.c | 7 +++++--
include/linux/fsnotify_backend.h | 5 ++++-
5 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 060b177146e84..95a330d2f8a17 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -27,7 +27,9 @@ static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
return false;
}
-static int fanotify_merge(struct list_head *list, struct fsnotify_event *event)
+static int fanotify_merge(struct list_head *list,
+ struct fsnotify_event *event,
+ void **arg)
{
struct fsnotify_event_holder *test_holder;
struct fsnotify_event *test_event;
@@ -92,7 +94,7 @@ static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_e
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- ret = fsnotify_add_notify_event(group, event, NULL, fanotify_merge);
+ ret = fsnotify_add_notify_event(group, event, NULL, fanotify_merge, NULL);
/* -EEXIST means this event was merged with another, not that it was an error */
if (ret == -EEXIST)
ret = 0;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 1d237e1bf7b18..daa666a6e6c98 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -67,7 +67,9 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new
return false;
}
-static int inotify_merge(struct list_head *list, struct fsnotify_event *event)
+static int inotify_merge(struct list_head *list,
+ struct fsnotify_event *event,
+ void **arg)
{
struct fsnotify_event_holder *last_holder;
struct fsnotify_event *last_event;
@@ -114,7 +116,7 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
fsn_event_priv->group = group;
event_priv->wd = wd;
- ret = fsnotify_add_notify_event(group, event, fsn_event_priv, inotify_merge);
+ ret = fsnotify_add_notify_event(group, event, fsn_event_priv, inotify_merge, NULL);
if (ret) {
inotify_free_event_priv(fsn_event_priv);
/* EEXIST says we tail matched, EOVERFLOW isn't something
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 19d274057bfa1..1ce71f5b95894 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -525,7 +525,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark,
fsn_event_priv->group = group;
event_priv->wd = i_mark->wd;
- ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv, NULL);
+ ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv, NULL, NULL);
if (ret)
inotify_free_event_priv(fsn_event_priv);
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 7fc8d004084c3..2d50a40ab1e4f 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -137,7 +137,10 @@ struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnot
*/
int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
struct fsnotify_event_private_data *priv,
- int (*merge)(struct list_head *, struct fsnotify_event *))
+ int (*merge)(struct list_head *,
+ struct fsnotify_event *,
+ void **arg),
+ void **arg)
{
struct fsnotify_event_holder *holder = NULL;
struct list_head *list = &group->notification_list;
@@ -170,7 +173,7 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
if (!list_empty(list) && merge) {
int ret;
- ret = merge(list, event);
+ ret = merge(list, event, arg);
if (ret) {
mutex_unlock(&group->notification_mutex);
if (holder != &event->holder)
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 8b2e095e5907d..afc6901929722 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -355,7 +355,10 @@ extern struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struc
extern int fsnotify_add_notify_event(struct fsnotify_group *group,
struct fsnotify_event *event,
struct fsnotify_event_private_data *priv,
- int (*merge)(struct list_head *, struct fsnotify_event *));
+ int (*merge)(struct list_head *,
+ struct fsnotify_event *,
+ void **),
+ void **arg);
/* true if the group notification queue is empty */
extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group);
/* return, but do not dequeue the first event on the notification queue */
--
GitLab
From 43ed7e16a8b47059d7f6ff67ba76f383a2421de3 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:34 -0500
Subject: [PATCH 133/863] fanotify: use merge argument to determine actual
event added to queue
fanotify needs to know the actual event added to queues so it can be
correctly checked for return values from userspace. To do this we need to
pass that information from the merger code back to the main even handling
routine. Currently that information is unused, but it will be.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 95a330d2f8a17..4feed8601e291 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -27,6 +27,7 @@ static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
return false;
}
+/* Note, if we return an event in *arg that a reference is being held... */
static int fanotify_merge(struct list_head *list,
struct fsnotify_event *event,
void **arg)
@@ -34,17 +35,22 @@ static int fanotify_merge(struct list_head *list,
struct fsnotify_event_holder *test_holder;
struct fsnotify_event *test_event;
struct fsnotify_event *new_event;
+ struct fsnotify_event **return_event = (struct fsnotify_event **)arg;
int ret = 0;
pr_debug("%s: list=%p event=%p\n", __func__, list, event);
+ *return_event = NULL;
+
/* and the list better be locked by something too! */
list_for_each_entry_reverse(test_holder, list, event_list) {
test_event = test_holder->event;
if (should_merge(test_event, event)) {
- ret = -EEXIST;
+ fsnotify_get_event(test_event);
+ *return_event = test_event;
+ ret = -EEXIST;
/* if they are exactly the same we are done */
if (test_event->mask == event->mask)
goto out;
@@ -66,11 +72,14 @@ static int fanotify_merge(struct list_head *list,
goto out;
}
+ /* we didn't return the test_event, so drop that ref */
+ fsnotify_put_event(test_event);
+ /* the reference we return on new_event is from clone */
+ *return_event = new_event;
+
/* build new event and replace it on the list */
new_event->mask = (test_event->mask | event->mask);
fsnotify_replace_event(test_holder, new_event);
- /* match ref from fsnotify_clone_event() */
- fsnotify_put_event(new_event);
break;
}
@@ -82,7 +91,7 @@ static int fanotify_merge(struct list_head *list,
static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
{
int ret;
-
+ struct fsnotify_event *used_event;
BUILD_BUG_ON(FAN_ACCESS != FS_ACCESS);
BUILD_BUG_ON(FAN_MODIFY != FS_MODIFY);
@@ -94,10 +103,12 @@ static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_e
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- ret = fsnotify_add_notify_event(group, event, NULL, fanotify_merge, NULL);
+ ret = fsnotify_add_notify_event(group, event, NULL, fanotify_merge, (void **)&used_event);
/* -EEXIST means this event was merged with another, not that it was an error */
if (ret == -EEXIST)
ret = 0;
+ if (used_event)
+ fsnotify_put_event(used_event);
return ret;
}
--
GitLab
From 59b0df211bd9699d7e0d01fcf9345a149f75b033 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Mon, 8 Feb 2010 12:53:52 -0500
Subject: [PATCH 134/863] fsnotify: use unsigned char * for dentry->d_name.name
fsnotify was using char * when it passed around the d_name.name string
internally but it is actually an unsigned char *. This patch switches
fsnotify to use unsigned and should silence some pointer signess warnings
which have popped out of xfs. I do not add -Wpointer-sign to the fsnotify
code as there are still issues with kstrdup and strlen which would pop
out needless warnings.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/namei.c | 2 +-
fs/notify/fsnotify.c | 5 +++--
fs/notify/notification.c | 4 ++--
include/linux/fsnotify.h | 12 ++++++------
include/linux/fsnotify_backend.h | 9 +++++----
5 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/fs/namei.c b/fs/namei.c
index 868d0cb9d473a..3479b176a4cd6 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2635,7 +2635,7 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
{
int error;
int is_dir = S_ISDIR(old_dentry->d_inode->i_mode);
- const char *old_name;
+ const unsigned char *old_name;
if (old_dentry->d_inode == new_dentry->d_inode)
return 0;
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 54d58d5f72c1c..c5adf833bf6a7 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -171,7 +171,7 @@ void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
static void send_to_group(struct fsnotify_group *group, struct inode *to_tell,
struct vfsmount *mnt, __u32 mask, void *data,
- int data_is, u32 cookie, const char *file_name,
+ int data_is, u32 cookie, const unsigned char *file_name,
struct fsnotify_event **event)
{
if (!group->ops->should_send_event(group, to_tell, mnt, mask,
@@ -206,7 +206,8 @@ static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
* out to all of the registered fsnotify_group. Those groups can then use the
* notification event in whatever means they feel necessary.
*/
-void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const char *file_name, u32 cookie)
+void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+ const unsigned char *file_name, u32 cookie)
{
struct fsnotify_group *group;
struct fsnotify_event *event = NULL;
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 2d50a40ab1e4f..b35faafacd383 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -370,8 +370,8 @@ struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event)
* @name the filename, if available
*/
struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
- int data_type, const char *name, u32 cookie,
- gfp_t gfp)
+ int data_type, const unsigned char *name,
+ u32 cookie, gfp_t gfp)
{
struct fsnotify_event *event;
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 06c0e50c79680..b8cf161f5a6de 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -59,14 +59,14 @@ static inline void fsnotify_link_count(struct inode *inode)
* fsnotify_move - file old_name at old_dir was moved to new_name at new_dir
*/
static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
- const char *old_name,
+ const unsigned char *old_name,
int isdir, struct inode *target, struct dentry *moved)
{
struct inode *source = moved->d_inode;
u32 fs_cookie = fsnotify_get_cookie();
__u32 old_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_FROM);
__u32 new_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_TO);
- const char *new_name = moved->d_name.name;
+ const unsigned char *new_name = moved->d_name.name;
if (old_dir == new_dir)
old_dir_mask |= FS_DN_RENAME;
@@ -290,7 +290,7 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
/*
* fsnotify_oldname_init - save off the old filename before we change it
*/
-static inline const char *fsnotify_oldname_init(const char *name)
+static inline const unsigned char *fsnotify_oldname_init(const unsigned char *name)
{
return kstrdup(name, GFP_KERNEL);
}
@@ -298,19 +298,19 @@ static inline const char *fsnotify_oldname_init(const char *name)
/*
* fsnotify_oldname_free - free the name we got from fsnotify_oldname_init
*/
-static inline void fsnotify_oldname_free(const char *old_name)
+static inline void fsnotify_oldname_free(const unsigned char *old_name)
{
kfree(old_name);
}
#else /* CONFIG_FSNOTIFY */
-static inline const char *fsnotify_oldname_init(const char *name)
+static inline const char *fsnotify_oldname_init(const unsigned char *name)
{
return NULL;
}
-static inline void fsnotify_oldname_free(const char *old_name)
+static inline void fsnotify_oldname_free(const unsigned char *old_name)
{
}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index afc6901929722..efe9ba321cf22 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -220,7 +220,7 @@ struct fsnotify_event {
__u32 mask; /* the type of access, bitwise OR for FS_* event types */
u32 sync_cookie; /* used to corrolate events, namely inotify mv events */
- char *file_name;
+ const unsigned char *file_name;
size_t name_len;
struct pid *tgid;
@@ -283,7 +283,7 @@ struct fsnotify_mark {
/* main fsnotify call to send events */
extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
- const char *name, u32 cookie);
+ const unsigned char *name, u32 cookie);
extern void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask);
extern void __fsnotify_inode_delete(struct inode *inode);
extern void __fsnotify_vfsmount_delete(struct vfsmount *mnt);
@@ -402,7 +402,8 @@ extern void fsnotify_unmount_inodes(struct list_head *list);
/* put here because inotify does some weird stuff when destroying watches */
extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
- void *data, int data_is, const char *name,
+ void *data, int data_is,
+ const unsigned char *name,
u32 cookie, gfp_t gfp);
/* fanotify likes to change events after they are on lists... */
@@ -413,7 +414,7 @@ extern int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
#else
static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
- const char *name, u32 cookie)
+ const unsigned char *name, u32 cookie)
{}
static inline void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
--
GitLab
From 6e006701ccc1590500186ef21e074bd900c5dd67 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Wed, 20 Jan 2010 22:27:56 +0200
Subject: [PATCH 135/863] dnotify: move dir_notify_enable declaration
Move dir_notify_enable declaration to where it belongs -- dnotify.h .
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
include/linux/dnotify.h | 1 +
include/linux/fs.h | 3 ---
kernel/sysctl.c | 1 +
3 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/include/linux/dnotify.h b/include/linux/dnotify.h
index ecc06286226dc..3290555a52ee6 100644
--- a/include/linux/dnotify.h
+++ b/include/linux/dnotify.h
@@ -28,6 +28,7 @@ struct dnotify_struct {
FS_CREATE | FS_DN_RENAME |\
FS_MOVED_FROM | FS_MOVED_TO)
+extern int dir_notify_enable;
extern void dnotify_flush(struct file *, fl_owner_t);
extern int fcntl_dirnotify(int, struct file *, unsigned long);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index f9a0032787588..d92c212476f91 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -410,9 +410,6 @@ extern int get_max_files(void);
extern int sysctl_nr_open;
extern struct inodes_stat_t inodes_stat;
extern int leases_enable, lease_break_time;
-#ifdef CONFIG_DNOTIFY
-extern int dir_notify_enable;
-#endif
struct buffer_head;
typedef int (get_block_t)(struct inode *inode, sector_t iblock,
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index d24f761f48769..7b983dbfe0ec3 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -44,6 +44,7 @@
#include <linux/times.h>
#include <linux/limits.h>
#include <linux/dcache.h>
+#include <linux/dnotify.h>
#include <linux/syscalls.h>
#include <linux/vmstat.h>
#include <linux/nfs_fs.h>
--
GitLab
From d14f1729483fad3a8817fbbcbd017678b7d1ad26 Mon Sep 17 00:00:00 2001
From: Dave Young <hidave.darkstar@gmail.com>
Date: Thu, 25 Feb 2010 20:28:57 -0500
Subject: [PATCH 136/863] sysctl extern cleanup: inotify
Extern declarations in sysctl.c should be move to their own head file, and
then include them in relavant .c files.
Move inotify_table extern declaration to linux/inotify.h
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
include/linux/inotify.h | 5 +++++
kernel/sysctl.c | 6 +++---
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index 959a38b8f75dd..94d209a1b6898 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -69,4 +69,9 @@ struct inotify_event {
#define IN_CLOEXEC O_CLOEXEC
#define IN_NONBLOCK O_NONBLOCK
+#ifdef __KERNEL__
+#include <linux/sysctl.h>
+extern struct ctl_table inotify_table[]; /* for sysctl */
+#endif
+
#endif /* _LINUX_INOTIFY_H */
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 7b983dbfe0ec3..fe30db7bdb0a2 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -131,6 +131,9 @@ static int min_percpu_pagelist_fract = 8;
static int ngroups_max = NGROUPS_MAX;
+#ifdef CONFIG_INOTIFY_USER
+#include <linux/inotify.h>
+#endif
#ifdef CONFIG_SPARC
#include <asm/system.h>
#endif
@@ -207,9 +210,6 @@ static struct ctl_table fs_table[];
static struct ctl_table debug_table[];
static struct ctl_table dev_table[];
extern struct ctl_table random_table[];
-#ifdef CONFIG_INOTIFY_USER
-extern struct ctl_table inotify_table[];
-#endif
#ifdef CONFIG_EPOLL
extern struct ctl_table epoll_table[];
#endif
--
GitLab
From c4ec54b40d33f8016fea970a383cc584dd0e6019 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:34 -0500
Subject: [PATCH 137/863] fsnotify: new fsnotify hooks and events types for
access decisions
introduce a new fsnotify hook, fsnotify_perm(), which is called from the
security code. This hook is used to allow fsnotify groups to make access
control decisions about events on the system. We also must change the
generic fsnotify function to return an error code if we intend these hooks
to be in any way useful.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 47 ++++++++++++++++----------------
include/linux/fsnotify.h | 19 +++++++++++++
include/linux/fsnotify_backend.h | 15 ++++++----
include/linux/security.h | 1 +
security/security.c | 16 +++++++++--
5 files changed, 68 insertions(+), 30 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index c5adf833bf6a7..6682686278942 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -169,27 +169,22 @@ void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
}
}
-static void send_to_group(struct fsnotify_group *group, struct inode *to_tell,
- struct vfsmount *mnt, __u32 mask, void *data,
- int data_is, u32 cookie, const unsigned char *file_name,
- struct fsnotify_event **event)
+static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
+ struct vfsmount *mnt, __u32 mask, void *data,
+ int data_is, u32 cookie, const unsigned char *file_name,
+ struct fsnotify_event **event)
{
if (!group->ops->should_send_event(group, to_tell, mnt, mask,
data, data_is))
- return;
+ return 0;
if (!*event) {
*event = fsnotify_create_event(to_tell, mask, data,
data_is, file_name,
cookie, GFP_KERNEL);
- /*
- * shit, we OOM'd and now we can't tell, maybe
- * someday someone else will want to do something
- * here
- */
if (!*event)
- return;
+ return -ENOMEM;
}
- group->ops->handle_event(group, *event);
+ return group->ops->handle_event(group, *event);
}
static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
@@ -206,20 +201,20 @@ static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
* out to all of the registered fsnotify_group. Those groups can then use the
* notification event in whatever means they feel necessary.
*/
-void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
- const unsigned char *file_name, u32 cookie)
+int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+ const unsigned char *file_name, u32 cookie)
{
struct fsnotify_group *group;
struct fsnotify_event *event = NULL;
struct vfsmount *mnt = NULL;
- int idx;
+ int idx, ret = 0;
/* global tests shouldn't care about events on child only the specific event */
__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
/* if no fsnotify listeners, nothing to do */
if (list_empty(&fsnotify_inode_groups) &&
list_empty(&fsnotify_vfsmount_groups))
- return;
+ return 0;
if (mask & FS_MODIFY)
__fsnotify_flush_ignored_mask(to_tell, data, data_is);
@@ -227,7 +222,7 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
/* if none of the directed listeners or vfsmount listeners care */
if (!(test_mask & fsnotify_inode_mask) &&
!(test_mask & fsnotify_vfsmount_mask))
- return;
+ return 0;
if (data_is == FSNOTIFY_EVENT_PATH)
mnt = ((struct path *)data)->mnt;
@@ -236,7 +231,7 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
* listeners list cares, nothing to do */
if (!(test_mask & to_tell->i_fsnotify_mask) &&
!needed_by_vfsmount(test_mask, mnt))
- return;
+ return 0;
/*
* SRCU!! the groups list is very very much read only and the path is
@@ -248,20 +243,24 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
if (test_mask & to_tell->i_fsnotify_mask) {
list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list) {
if (test_mask & group->mask) {
- send_to_group(group, to_tell, NULL, mask, data, data_is,
- cookie, file_name, &event);
+ ret = send_to_group(group, to_tell, NULL, mask, data, data_is,
+ cookie, file_name, &event);
+ if (ret)
+ goto out;
}
}
}
if (needed_by_vfsmount(test_mask, mnt)) {
list_for_each_entry_rcu(group, &fsnotify_vfsmount_groups, vfsmount_group_list) {
if (test_mask & group->mask) {
- send_to_group(group, to_tell, mnt, mask, data, data_is,
- cookie, file_name, &event);
+ ret = send_to_group(group, to_tell, mnt, mask, data, data_is,
+ cookie, file_name, &event);
+ if (ret)
+ goto out;
}
}
}
-
+out:
srcu_read_unlock(&fsnotify_grp_srcu, idx);
/*
* fsnotify_create_event() took a reference so the event can't be cleaned
@@ -269,6 +268,8 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
*/
if (event)
fsnotify_put_event(event);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(fsnotify);
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index b8cf161f5a6de..64efda9aae628 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -34,6 +34,25 @@ static inline void fsnotify_parent(struct path *path, struct dentry *dentry, __u
__fsnotify_parent(path, dentry, mask);
}
+/* simple call site for access decisions */
+static inline int fsnotify_perm(struct file *file, int mask)
+{
+ struct path *path = &file->f_path;
+ struct inode *inode = path->dentry->d_inode;
+ __u32 fsnotify_mask;
+
+ if (file->f_mode & FMODE_NONOTIFY)
+ return 0;
+ if (!(mask & (MAY_READ | MAY_OPEN)))
+ return 0;
+ if (mask & MAY_READ)
+ fsnotify_mask = FS_ACCESS_PERM;
+ if (mask & MAY_OPEN)
+ fsnotify_mask = FS_OPEN_PERM;
+
+ return fsnotify(inode, fsnotify_mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+}
+
/*
* fsnotify_d_move - dentry has been moved
* Called with dcache_lock and dentry->d_lock held.
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index efe9ba321cf22..c34728e7d8cb9 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -41,6 +41,9 @@
#define FS_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
#define FS_IN_IGNORED 0x00008000 /* last inotify event here */
+#define FS_OPEN_PERM 0x00010000 /* open event in an permission hook */
+#define FS_ACCESS_PERM 0x00020000 /* access event in a permissions hook */
+
#define FS_IN_ISDIR 0x40000000 /* event occurred against dir */
#define FS_IN_ONESHOT 0x80000000 /* only send event once */
@@ -282,8 +285,8 @@ struct fsnotify_mark {
/* called from the vfs helpers */
/* main fsnotify call to send events */
-extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
- const unsigned char *name, u32 cookie);
+extern int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+ const unsigned char *name, u32 cookie);
extern void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask);
extern void __fsnotify_inode_delete(struct inode *inode);
extern void __fsnotify_vfsmount_delete(struct vfsmount *mnt);
@@ -413,9 +416,11 @@ extern int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
#else
-static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
- const unsigned char *name, u32 cookie)
-{}
+static inline int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+ const unsigned char *name, u32 cookie)
+{
+ return 0;
+}
static inline void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
{}
diff --git a/include/linux/security.h b/include/linux/security.h
index 0c88191704636..24fc29540aa32 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -23,6 +23,7 @@
#define __LINUX_SECURITY_H
#include <linux/fs.h>
+#include <linux/fsnotify.h>
#include <linux/binfmts.h>
#include <linux/signal.h>
#include <linux/resource.h>
diff --git a/security/security.c b/security/security.c
index 351942a4ca0e7..f6ac27cd3452b 100644
--- a/security/security.c
+++ b/security/security.c
@@ -620,7 +620,13 @@ void security_inode_getsecid(const struct inode *inode, u32 *secid)
int security_file_permission(struct file *file, int mask)
{
- return security_ops->file_permission(file, mask);
+ int ret;
+
+ ret = security_ops->file_permission(file, mask);
+ if (ret)
+ return ret;
+
+ return fsnotify_perm(file, mask);
}
int security_file_alloc(struct file *file)
@@ -684,7 +690,13 @@ int security_file_receive(struct file *file)
int security_dentry_open(struct file *file, const struct cred *cred)
{
- return security_ops->dentry_open(file, cred);
+ int ret;
+
+ ret = security_ops->dentry_open(file, cred);
+ if (ret)
+ return ret;
+
+ return fsnotify_perm(file, MAY_OPEN);
}
int security_task_create(unsigned long clone_flags)
--
GitLab
From 9e66e4233db9c7e31e9ee706be2c9ddd54cf99b3 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:34 -0500
Subject: [PATCH 138/863] fanotify: permissions and blocking
This is the backend work needed for fanotify to support the new
FS_OPEN_PERM and FS_ACCESS_PERM fsnotify events. This is done using the
new fsnotify secondary queue. No userspace interface is provided actually
respond to or request these events.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/Kconfig | 14 ++++++++
fs/notify/fanotify/fanotify.c | 54 +++++++++++++++++++++++++++---
fs/notify/fanotify/fanotify_user.c | 5 +++
include/linux/fanotify.h | 18 ++++++++++
include/linux/fsnotify_backend.h | 12 +++++++
5 files changed, 99 insertions(+), 4 deletions(-)
diff --git a/fs/notify/fanotify/Kconfig b/fs/notify/fanotify/Kconfig
index 668e5df28e28b..566de30395c22 100644
--- a/fs/notify/fanotify/Kconfig
+++ b/fs/notify/fanotify/Kconfig
@@ -10,3 +10,17 @@ config FANOTIFY
the event.
If unsure, say Y.
+
+config FANOTIFY_ACCESS_PERMISSIONS
+ bool "fanotify permissions checking"
+ depends on FANOTIFY
+ depends on SECURITY
+ default n
+ ---help---
+ Say Y here is you want fanotify listeners to be able to make permissions
+ decisions concerning filesystem events. This is used by some fanotify
+ listeners which need to scan files before allowing the system access to
+ use those files. This is used by some anti-malware vendors and by some
+ hierarchical storage managent systems.
+
+ If unsure, say N.
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 4feed8601e291..52d0a55a249ed 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -2,9 +2,12 @@
#include <linux/fdtable.h>
#include <linux/fsnotify_backend.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#include <linux/kernel.h> /* UINT_MAX */
#include <linux/mount.h>
+#include <linux/sched.h>
#include <linux/types.h>
+#include <linux/wait.h>
static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
{
@@ -88,10 +91,37 @@ static int fanotify_merge(struct list_head *list,
return ret;
}
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+static int fanotify_get_response_from_access(struct fsnotify_group *group,
+ struct fsnotify_event *event)
+{
+ int ret;
+
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
+ wait_event(group->fanotify_data.access_waitq, event->response);
+
+ /* userspace responded, convert to something usable */
+ spin_lock(&event->lock);
+ switch (event->response) {
+ case FAN_ALLOW:
+ ret = 0;
+ break;
+ case FAN_DENY:
+ default:
+ ret = -EPERM;
+ }
+ event->response = 0;
+ spin_unlock(&event->lock);
+
+ return ret;
+}
+#endif
+
static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
{
int ret;
- struct fsnotify_event *used_event;
+ struct fsnotify_event *notify_event = NULL;
BUILD_BUG_ON(FAN_ACCESS != FS_ACCESS);
BUILD_BUG_ON(FAN_MODIFY != FS_MODIFY);
@@ -100,15 +130,31 @@ static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_e
BUILD_BUG_ON(FAN_OPEN != FS_OPEN);
BUILD_BUG_ON(FAN_EVENT_ON_CHILD != FS_EVENT_ON_CHILD);
BUILD_BUG_ON(FAN_Q_OVERFLOW != FS_Q_OVERFLOW);
+ BUILD_BUG_ON(FAN_OPEN_PERM != FS_OPEN_PERM);
+ BUILD_BUG_ON(FAN_ACCESS_PERM != FS_ACCESS_PERM);
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- ret = fsnotify_add_notify_event(group, event, NULL, fanotify_merge, (void **)&used_event);
+ ret = fsnotify_add_notify_event(group, event, NULL, fanotify_merge,
+ (void **)¬ify_event);
/* -EEXIST means this event was merged with another, not that it was an error */
if (ret == -EEXIST)
ret = 0;
- if (used_event)
- fsnotify_put_event(used_event);
+ if (ret)
+ goto out;
+
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ if (event->mask & FAN_ALL_PERM_EVENTS) {
+ /* if we merged we need to wait on the new event */
+ if (notify_event)
+ event = notify_event;
+ ret = fanotify_get_response_from_access(group, event);
+ }
+#endif
+
+out:
+ if (notify_event)
+ fsnotify_put_event(notify_event);
return ret;
}
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 84d3e2047de31..09d9bdb62af32 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -482,6 +482,11 @@ SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
return PTR_ERR(group);
group->priority = priority;
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ mutex_init(&group->fanotify_data.access_mutex);
+ init_waitqueue_head(&group->fanotify_data.access_waitq);
+ INIT_LIST_HEAD(&group->fanotify_data.access_list);
+#endif
fd = anon_inode_getfd("[fanotify]", &fanotify_fops, group, f_flags);
if (fd < 0)
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 385896c9f8289..02f80676c2382 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -15,6 +15,9 @@
/* FIXME currently Q's have no limit.... */
#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
+#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */
+#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */
+
/* helper events */
#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
@@ -52,7 +55,14 @@
FAN_CLOSE |\
FAN_OPEN)
+/*
+ * All events which require a permission response from userspace
+ */
+#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
+ FAN_ACCESS_PERM)
+
#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\
+ FAN_ALL_PERM_EVENTS |\
FAN_Q_OVERFLOW)
#define FANOTIFY_METADATA_VERSION 1
@@ -65,6 +75,10 @@ struct fanotify_event_metadata {
__s64 pid;
} __attribute__ ((packed));
+/* Legit userspace responses to a _PERM event */
+#define FAN_ALLOW 0x01
+#define FAN_DENY 0x02
+
/* Helper functions to deal with fanotify_event_metadata buffers */
#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
@@ -78,5 +92,9 @@ struct fanotify_event_metadata {
#ifdef __KERNEL__
+struct fanotify_wait {
+ struct fsnotify_event *event;
+ __s32 fd;
+};
#endif /* __KERNEL__ */
#endif /* _LINUX_FANOTIFY_H */
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index c34728e7d8cb9..b0d00fd6bfad0 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -159,6 +159,14 @@ struct fsnotify_group {
struct fasync_struct *fa; /* async notification */
struct user_struct *user;
} inotify_data;
+#endif
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ struct fanotify_group_private_data {
+ /* allows a group to block waiting for a userspace response */
+ struct mutex access_mutex;
+ struct list_head access_list;
+ wait_queue_head_t access_waitq;
+ } fanotify_data;
#endif
};
};
@@ -227,6 +235,10 @@ struct fsnotify_event {
size_t name_len;
struct pid *tgid;
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ __u32 response; /* userspace answer to question */
+#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
+
struct list_head private_data_list; /* groups can store private data here */
};
--
GitLab
From b2d879096ac799722e6017ee82c0586f0d101c9c Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 17 Dec 2009 21:24:34 -0500
Subject: [PATCH 139/863] fanotify: userspace interface for permission
responses
fanotify groups need to respond to events which include permissions types.
To do so groups will send a response using write() on the fanotify_fd they
have open.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 3 +
fs/notify/fanotify/fanotify_user.c | 182 ++++++++++++++++++++++++++++-
include/linux/fanotify.h | 5 +
3 files changed, 184 insertions(+), 6 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 52d0a55a249ed..bbcfccd4a8ea7 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -114,6 +114,9 @@ static int fanotify_get_response_from_access(struct fsnotify_group *group,
event->response = 0;
spin_unlock(&event->lock);
+ pr_debug("%s: group=%p event=%p about to return ret=%d\n", __func__,
+ group, event, ret);
+
return ret;
}
#endif
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 09d9bdb62af32..87f0be852f712 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -18,6 +18,13 @@
extern const struct fsnotify_ops fanotify_fsnotify_ops;
static struct kmem_cache *fanotify_mark_cache __read_mostly;
+static struct kmem_cache *fanotify_response_event_cache __read_mostly;
+
+struct fanotify_response_event {
+ struct list_head list;
+ __s32 fd;
+ struct fsnotify_event *event;
+};
/*
* Get an fsnotify notification event if one exists and is small
@@ -110,23 +117,152 @@ static ssize_t fill_event_metadata(struct fsnotify_group *group,
return metadata->fd;
}
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+static struct fanotify_response_event *dequeue_re(struct fsnotify_group *group,
+ __s32 fd)
+{
+ struct fanotify_response_event *re, *return_re = NULL;
+
+ mutex_lock(&group->fanotify_data.access_mutex);
+ list_for_each_entry(re, &group->fanotify_data.access_list, list) {
+ if (re->fd != fd)
+ continue;
+
+ list_del_init(&re->list);
+ return_re = re;
+ break;
+ }
+ mutex_unlock(&group->fanotify_data.access_mutex);
+
+ pr_debug("%s: found return_re=%p\n", __func__, return_re);
+
+ return return_re;
+}
+
+static int process_access_response(struct fsnotify_group *group,
+ struct fanotify_response *response_struct)
+{
+ struct fanotify_response_event *re;
+ __s32 fd = response_struct->fd;
+ __u32 response = response_struct->response;
+
+ pr_debug("%s: group=%p fd=%d response=%d\n", __func__, group,
+ fd, response);
+ /*
+ * make sure the response is valid, if invalid we do nothing and either
+ * userspace can send a valid responce or we will clean it up after the
+ * timeout
+ */
+ switch (response) {
+ case FAN_ALLOW:
+ case FAN_DENY:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (fd < 0)
+ return -EINVAL;
+
+ re = dequeue_re(group, fd);
+ if (!re)
+ return -ENOENT;
+
+ re->event->response = response;
+
+ wake_up(&group->fanotify_data.access_waitq);
+
+ kmem_cache_free(fanotify_response_event_cache, re);
+
+ return 0;
+}
+
+static int prepare_for_access_response(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ __s32 fd)
+{
+ struct fanotify_response_event *re;
+
+ if (!(event->mask & FAN_ALL_PERM_EVENTS))
+ return 0;
+
+ re = kmem_cache_alloc(fanotify_response_event_cache, GFP_KERNEL);
+ if (!re)
+ return -ENOMEM;
+
+ re->event = event;
+ re->fd = fd;
+
+ mutex_lock(&group->fanotify_data.access_mutex);
+ list_add_tail(&re->list, &group->fanotify_data.access_list);
+ mutex_unlock(&group->fanotify_data.access_mutex);
+
+ return 0;
+}
+
+static void remove_access_response(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ __s32 fd)
+{
+ struct fanotify_response_event *re;
+
+ if (!(event->mask & FAN_ALL_PERM_EVENTS))
+ return;
+
+ re = dequeue_re(group, fd);
+ if (!re)
+ return;
+
+ BUG_ON(re->event != event);
+
+ kmem_cache_free(fanotify_response_event_cache, re);
+
+ return;
+}
+#else
+static int prepare_for_access_response(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ __s32 fd)
+{
+ return 0;
+}
+
+static void remove_access_response(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ __s32 fd)
+{
+ return 0;
+}
+#endif
+
static ssize_t copy_event_to_user(struct fsnotify_group *group,
struct fsnotify_event *event,
char __user *buf)
{
struct fanotify_event_metadata fanotify_event_metadata;
- int ret;
+ int fd, ret;
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- ret = fill_event_metadata(group, &fanotify_event_metadata, event);
- if (ret < 0)
- return ret;
+ fd = fill_event_metadata(group, &fanotify_event_metadata, event);
+ if (fd < 0)
+ return fd;
+
+ ret = prepare_for_access_response(group, event, fd);
+ if (ret)
+ goto out_close_fd;
+ ret = -EFAULT;
if (copy_to_user(buf, &fanotify_event_metadata, FAN_EVENT_METADATA_LEN))
- return -EFAULT;
+ goto out_kill_access_response;
return FAN_EVENT_METADATA_LEN;
+
+out_kill_access_response:
+ remove_access_response(group, event, fd);
+out_close_fd:
+ sys_close(fd);
+ return ret;
}
/* intofiy userspace file descriptor functions */
@@ -197,6 +333,33 @@ static ssize_t fanotify_read(struct file *file, char __user *buf,
return ret;
}
+static ssize_t fanotify_write(struct file *file, const char __user *buf, size_t count, loff_t *pos)
+{
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ struct fanotify_response response = { .fd = -1, .response = -1 };
+ struct fsnotify_group *group;
+ int ret;
+
+ group = file->private_data;
+
+ if (count > sizeof(response))
+ count = sizeof(response);
+
+ pr_debug("%s: group=%p count=%zu\n", __func__, group, count);
+
+ if (copy_from_user(&response, buf, count))
+ return -EFAULT;
+
+ ret = process_access_response(group, &response);
+ if (ret < 0)
+ count = ret;
+
+ return count;
+#else
+ return -EINVAL;
+#endif
+}
+
static int fanotify_release(struct inode *ignored, struct file *file)
{
struct fsnotify_group *group = file->private_data;
@@ -237,6 +400,7 @@ static long fanotify_ioctl(struct file *file, unsigned int cmd, unsigned long ar
static const struct file_operations fanotify_fops = {
.poll = fanotify_poll,
.read = fanotify_read,
+ .write = fanotify_write,
.fasync = NULL,
.release = fanotify_release,
.unlocked_ioctl = fanotify_ioctl,
@@ -470,7 +634,7 @@ SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
if (flags & ~FAN_ALL_INIT_FLAGS)
return -EINVAL;
- f_flags = (O_RDONLY | FMODE_NONOTIFY);
+ f_flags = O_RDWR | FMODE_NONOTIFY;
if (flags & FAN_CLOEXEC)
f_flags |= O_CLOEXEC;
if (flags & FAN_NONBLOCK)
@@ -527,7 +691,11 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
default:
return -EINVAL;
}
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ if (mask & ~(FAN_ALL_EVENTS | FAN_ALL_PERM_EVENTS | FAN_EVENT_ON_CHILD))
+#else
if (mask & ~(FAN_ALL_EVENTS | FAN_EVENT_ON_CHILD))
+#endif
return -EINVAL;
filp = fget_light(fanotify_fd, &fput_needed);
@@ -600,6 +768,8 @@ SYSCALL_ALIAS(sys_fanotify_mark, SyS_fanotify_mark);
static int __init fanotify_user_setup(void)
{
fanotify_mark_cache = KMEM_CACHE(fsnotify_mark, SLAB_PANIC);
+ fanotify_response_event_cache = KMEM_CACHE(fanotify_response_event,
+ SLAB_PANIC);
return 0;
}
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 02f80676c2382..f0949a57ca9d7 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -75,6 +75,11 @@ struct fanotify_event_metadata {
__s64 pid;
} __attribute__ ((packed));
+struct fanotify_response {
+ __s32 fd;
+ __u32 response;
+} __attribute__ ((packed));
+
/* Legit userspace responses to a _PERM event */
#define FAN_ALLOW 0x01
#define FAN_DENY 0x02
--
GitLab
From 8860f060e473dce1a0873d92105d536f72b05908 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 23 Dec 2009 00:10:25 -0500
Subject: [PATCH 140/863] fanotify: do not return 0 in a void function
remove_access_response() is supposed to have a void return, but was
returning 0;
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 87f0be852f712..7c869fa23ec6a 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -231,7 +231,7 @@ static void remove_access_response(struct fsnotify_group *group,
struct fsnotify_event *event,
__s32 fd)
{
- return 0;
+ return;
}
#endif
--
GitLab
From 98b5c10d320adfa250c1c18f3ccaec2f78e5e11d Mon Sep 17 00:00:00 2001
From: Jean-Christophe Dubois <jcd@tribudubois.net>
Date: Tue, 23 Mar 2010 08:08:09 +0100
Subject: [PATCH 141/863] fanotify: do not always return 0 in fsnotify
It seems to me you are always returning 0 in fsnotify, when you should return
the error (EPERM) returned by fanotify.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 6682686278942..9810babb1a3be 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -269,7 +269,7 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
if (event)
fsnotify_put_event(event);
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(fsnotify);
--
GitLab
From b31d397e430a90cbe9d3656929a7d5f96e986666 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 21 Apr 2010 16:49:38 -0400
Subject: [PATCH 142/863] fsnotify: call iput on inodes when no longer marked
fsnotify takes an igrab on an inode when it adds a mark. The code was
supposed to drop the reference when the mark was removed but didn't.
This caused problems when an fs was unmounted because those inodes would
clearly not be gone. Thus resulting in the most devistating of messages:
VFS: Busy inodes after unmount of loop0. Self-destruct in 5 seconds.
>>> Have a nice day...
Jiri Slaby bisected the problem to a patch in the fsnotify tree. The
code snippets below show my stupidity quite clearly.
void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark)
{
...
mark->inode = NULL;
...
}
void fsnotify_destroy_mark(struct fsnotify_mark *mark)
{
struct inode *inode = NULL;
...
if (mark->flags & FSNOTIFY_MARK_FLAG_INODE) {
fsnotify_destroy_inode_mark(mark);
inode = mark->i.inode;
}
...
if (inode)
iput(inode);
...
}
Obviously the intent was to capture the inode before it was set to NULL in
fsnotify_destory_inode_mark() so we wouldn't be leaking inodes forever.
Instead we leaked them (and exploded on umount)
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/mark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 1e824e64441d1..8f3b0e7a543de 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -133,8 +133,8 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
spin_lock(&group->mark_lock);
if (mark->flags & FSNOTIFY_MARK_FLAG_INODE) {
- fsnotify_destroy_inode_mark(mark);
inode = mark->i.inode;
+ fsnotify_destroy_inode_mark(mark);
} else if (mark->flags & FSNOTIFY_MARK_FLAG_VFSMOUNT)
fsnotify_destroy_vfsmount_mark(mark);
else
--
GitLab
From fb1cfb88c8597d847553f39efc2bbd41c72c5f50 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 12 May 2010 11:42:29 -0400
Subject: [PATCH 143/863] fsnotify: initialize mask in fsnotify_perm
akpm got a warning the fsnotify_mask could be used uninitialized in
fsnotify_perm(). It's not actually possible but his compiler complained
about it. This patch just initializes it to 0 to shut up the compiler.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
include/linux/fsnotify.h | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 64efda9aae628..59d0df43ff9d5 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -39,16 +39,18 @@ static inline int fsnotify_perm(struct file *file, int mask)
{
struct path *path = &file->f_path;
struct inode *inode = path->dentry->d_inode;
- __u32 fsnotify_mask;
+ __u32 fsnotify_mask = 0;
if (file->f_mode & FMODE_NONOTIFY)
return 0;
if (!(mask & (MAY_READ | MAY_OPEN)))
return 0;
- if (mask & MAY_READ)
- fsnotify_mask = FS_ACCESS_PERM;
if (mask & MAY_OPEN)
fsnotify_mask = FS_OPEN_PERM;
+ else if (mask & MAY_READ)
+ fsnotify_mask = FS_ACCESS_PERM;
+ else
+ BUG();
return fsnotify(inode, fsnotify_mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
--
GitLab
From 0a24887afacefbe2c44e0eee4150b43959a60665 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 14 May 2010 15:35:21 -0500
Subject: [PATCH 144/863] inotify_user.c: make local symbol static
The symbol inotify_max_user_watches is not used outside this
file and should be static.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 1ce71f5b95894..44aeb0f1b2225 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -46,7 +46,7 @@
/* these are configurable via /proc/sys/fs/inotify/ */
static int inotify_max_user_instances __read_mostly;
static int inotify_max_queued_events __read_mostly;
-int inotify_max_user_watches __read_mostly;
+static int inotify_max_user_watches __read_mostly;
static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
struct kmem_cache *event_priv_cachep __read_mostly;
--
GitLab
From 269ed32a9ce00132b9372e9c00014532e054d6b2 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 27 May 2010 09:29:37 -0400
Subject: [PATCH 145/863] fanotify: default Kconfig to n
fanotify has default to y in linux-next since it's inception but default to
n in the final push to Linus.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/notify/fanotify/Kconfig b/fs/notify/fanotify/Kconfig
index 566de30395c22..3ac36b7bf6b95 100644
--- a/fs/notify/fanotify/Kconfig
+++ b/fs/notify/fanotify/Kconfig
@@ -2,7 +2,7 @@ config FANOTIFY
bool "Filesystem wide access notification"
select FSNOTIFY
select ANON_INODES
- default y
+ default n
---help---
Say Y here to enable fanotify suport. fanotify is a file access
notification system which differs from inotify in that it sends
--
GitLab
From 08ae89380a8210a9965d04083e1de78cb8bca4b1 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Thu, 27 May 2010 09:41:40 -0400
Subject: [PATCH 146/863] fanotify: drop the useless priority argument
The priority argument in fanotify is useless. Kill it.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 8 +++-----
fs/notify/group.c | 10 +++-------
include/linux/fsnotify_backend.h | 1 -
include/linux/syscalls.h | 3 +--
4 files changed, 7 insertions(+), 15 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 7c869fa23ec6a..664102084766b 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -616,14 +616,13 @@ static int fanotify_add_inode_mark(struct fsnotify_group *group,
}
/* fanotify syscalls */
-SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
- unsigned int, priority)
+SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
{
struct fsnotify_group *group;
int f_flags, fd;
- pr_debug("%s: flags=%d event_f_flags=%d priority=%d\n",
- __func__, flags, event_f_flags, priority);
+ pr_debug("%s: flags=%d event_f_flags=%d\n",
+ __func__, flags, event_f_flags);
if (event_f_flags)
return -EINVAL;
@@ -645,7 +644,6 @@ SYSCALL_DEFINE3(fanotify_init, unsigned int, flags, unsigned int, event_f_flags,
if (IS_ERR(group))
return PTR_ERR(group);
- group->priority = priority;
#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
mutex_init(&group->fanotify_data.access_mutex);
init_waitqueue_head(&group->fanotify_data.access_waitq);
diff --git a/fs/notify/group.c b/fs/notify/group.c
index ada913fd4f7fb..7ac65ed4735ba 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -90,7 +90,6 @@ void fsnotify_recalc_group_mask(struct fsnotify_group *group)
void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
{
struct fsnotify_group *group_iter;
- unsigned int priority = group->priority;
mutex_lock(&fsnotify_grp_mutex);
@@ -98,7 +97,7 @@ void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
list_for_each_entry(group_iter, &fsnotify_vfsmount_groups,
vfsmount_group_list) {
/* insert in front of this one? */
- if (priority < group_iter->priority) {
+ if (group < group_iter) {
/* list_add_tail() insert in front of group_iter */
list_add_tail_rcu(&group->inode_group_list,
&group_iter->inode_group_list);
@@ -118,15 +117,14 @@ void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
void fsnotify_add_inode_group(struct fsnotify_group *group)
{
struct fsnotify_group *group_iter;
- unsigned int priority = group->priority;
mutex_lock(&fsnotify_grp_mutex);
- /* add to global group list, priority 0 first, UINT_MAX last */
+ /* add to global group list */
if (!group->on_inode_group_list) {
list_for_each_entry(group_iter, &fsnotify_inode_groups,
inode_group_list) {
- if (priority < group_iter->priority) {
+ if (group < group_iter) {
/* list_add_tail() insert in front of group_iter */
list_add_tail_rcu(&group->inode_group_list,
&group_iter->inode_group_list);
@@ -260,8 +258,6 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
spin_lock_init(&group->mark_lock);
INIT_LIST_HEAD(&group->marks_list);
- group->priority = UINT_MAX;
-
group->ops = ops;
return group;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index b0d00fd6bfad0..b9b3f24ad4fcf 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -143,7 +143,6 @@ struct fsnotify_group {
* a group */
struct list_head marks_list; /* all inode marks for this group */
- unsigned int priority; /* order of this group compared to others */
/* prevents double list_del of group_list. protected by global fsnotify_grp_mutex */
bool on_inode_group_list;
bool on_vfsmount_group_list;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 5b05c37059e9b..0ec26a74f20ac 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -813,8 +813,7 @@ asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,
asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
struct timespec __user *, const sigset_t __user *,
size_t);
-asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags,
- unsigned int priority);
+asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags);
asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags,
u64 mask, int fd,
const char __user *pathname);
--
GitLab
From e4e047a22058f48544b16728e0f15a3fc12bb0cf Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 20 May 2010 01:36:28 +1000
Subject: [PATCH 147/863] fsnotify: update gfp/slab.h includes
Implicit slab.h inclusion via percpu.h is about to go away. Make sure
gfp.h or slab.h is included as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 1 +
fs/notify/vfsmount_mark.c | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 664102084766b..da01091f93ebf 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -10,6 +10,7 @@
#include <linux/poll.h>
#include <linux/security.h>
#include <linux/syscalls.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/uaccess.h>
diff --git a/fs/notify/vfsmount_mark.c b/fs/notify/vfsmount_mark.c
index 8f1aa02f4f02a..ec580a25d2938 100644
--- a/fs/notify/vfsmount_mark.c
+++ b/fs/notify/vfsmount_mark.c
@@ -22,7 +22,6 @@
#include <linux/module.h>
#include <linux/mount.h>
#include <linux/mutex.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/writeback.h> /* for inode_lock */
--
GitLab
From ff311008ab8d2f2cfdbbefd407d1b05acc8164b2 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 148/863] inotify: fix inotify oneshot support
During the large inotify rewrite to fsnotify I completely dropped support
for IN_ONESHOT. Reimplement that support.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_fsnotify.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index daa666a6e6c98..388a150c3d4a4 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -126,6 +126,9 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
ret = 0;
}
+ if (fsn_mark->mask & IN_ONESHOT)
+ fsnotify_destroy_mark(fsn_mark);
+
/*
* If we hold the fsn_mark until after the event is on the queue
* IN_IGNORED won't be able to pass this event in the queue
--
GitLab
From 611da04f7a31b2208e838be55a42c7a1310ae321 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 149/863] inotify: send IN_UNMOUNT events
Since the .31 or so notify rewrite inotify has not sent events about
inodes which are unmounted. This patch restores those events.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_user.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 44aeb0f1b2225..f381dafe8efb8 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -90,8 +90,11 @@ static inline __u32 inotify_arg_to_mask(u32 arg)
{
__u32 mask;
- /* everything should accept their own ignored and cares about children */
- mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD);
+ /*
+ * everything should accept their own ignored, cares about children,
+ * and should receive events when the inode is unmounted
+ */
+ mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD | FS_UNMOUNT);
/* mask off the flags used to open the fd */
mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT));
--
GitLab
From 8c1934c8d70b22ca8333b216aec6c7d09fdbd6a6 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 150/863] inotify: allow users to request not to recieve events
on unlinked children
An inotify watch on a directory will send events for children even if those
children have been unlinked. This patch add a new inotify flag IN_EXCL_UNLINK
which allows a watch to specificy they don't care about unlinked children.
This should fix performance problems seen by tasks which add a watch to
/tmp and then are overrun with events when other processes are reading and
writing to unlinked files they created in /tmp.
https://bugzilla.kernel.org/show_bug.cgi?id=16296
Requested-by: Matthias Clasen <mclasen@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_fsnotify.c | 9 +++++++++
fs/notify/inotify/inotify_user.c | 2 +-
include/linux/fsnotify_backend.h | 1 +
include/linux/inotify.h | 1 +
4 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 388a150c3d4a4..9d332e7f5a5c5 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -22,6 +22,7 @@
* General Public License for more details.
*/
+#include <linux/dcache.h> /* d_unlinked */
#include <linux/fs.h> /* struct inode */
#include <linux/fsnotify_backend.h>
#include <linux/inotify.h>
@@ -157,6 +158,14 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
mask = (mask & ~FS_EVENT_ON_CHILD);
send = (fsn_mark->mask & mask);
+ if (send && (fsn_mark->mask & FS_EXCL_UNLINK) &&
+ (data_type == FSNOTIFY_EVENT_PATH)) {
+ struct path *path = data;
+
+ if (d_unlinked(path->dentry))
+ send = false;
+ }
+
/* find took a reference */
fsnotify_put_mark(fsn_mark);
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index f381dafe8efb8..dfc80f70e5178 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -97,7 +97,7 @@ static inline __u32 inotify_arg_to_mask(u32 arg)
mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD | FS_UNMOUNT);
/* mask off the flags used to open the fd */
- mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT));
+ mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT | IN_EXCL_UNLINK));
return mask;
}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index b9b3f24ad4fcf..4b809fcd4996e 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -44,6 +44,7 @@
#define FS_OPEN_PERM 0x00010000 /* open event in an permission hook */
#define FS_ACCESS_PERM 0x00020000 /* access event in a permissions hook */
+#define FS_EXCL_UNLINK 0x04000000 /* do not send events if object is unlinked */
#define FS_IN_ISDIR 0x40000000 /* event occurred against dir */
#define FS_IN_ONESHOT 0x80000000 /* only send event once */
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index 94d209a1b6898..b74f2ef2c3686 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -51,6 +51,7 @@ struct inotify_event {
/* special flags */
#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */
#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */
+#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */
#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */
#define IN_ISDIR 0x40000000 /* event occurred against dir */
#define IN_ONESHOT 0x80000000 /* only send event once */
--
GitLab
From f874e1ac21d7708464dc656a10312542c54719f1 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 151/863] inotify: force inotify and fsnotify use same bits
inotify uses bits called IN_* and fsnotify uses bits called FS_*. These
need to line up. This patch adds build time checks to make sure noone can
change these bits so they are not the same.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_user.c | 21 +++++++++++++++++++++
include/linux/inotify.h | 9 +++++++++
2 files changed, 30 insertions(+)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index dfc80f70e5178..c8203ce28ab7c 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -839,6 +839,27 @@ SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
*/
static int __init inotify_user_setup(void)
{
+ BUILD_BUG_ON(IN_ACCESS != FS_ACCESS);
+ BUILD_BUG_ON(IN_MODIFY != FS_MODIFY);
+ BUILD_BUG_ON(IN_ATTRIB != FS_ATTRIB);
+ BUILD_BUG_ON(IN_CLOSE_WRITE != FS_CLOSE_WRITE);
+ BUILD_BUG_ON(IN_CLOSE_NOWRITE != FS_CLOSE_NOWRITE);
+ BUILD_BUG_ON(IN_OPEN != FS_OPEN);
+ BUILD_BUG_ON(IN_MOVED_FROM != FS_MOVED_FROM);
+ BUILD_BUG_ON(IN_MOVED_TO != FS_MOVED_TO);
+ BUILD_BUG_ON(IN_CREATE != FS_CREATE);
+ BUILD_BUG_ON(IN_DELETE != FS_DELETE);
+ BUILD_BUG_ON(IN_DELETE_SELF != FS_DELETE_SELF);
+ BUILD_BUG_ON(IN_MOVE_SELF != FS_MOVE_SELF);
+ BUILD_BUG_ON(IN_UNMOUNT != FS_UNMOUNT);
+ BUILD_BUG_ON(IN_Q_OVERFLOW != FS_Q_OVERFLOW);
+ BUILD_BUG_ON(IN_IGNORED != FS_IN_IGNORED);
+ BUILD_BUG_ON(IN_EXCL_UNLINK != FS_EXCL_UNLINK);
+ BUILD_BUG_ON(IN_ISDIR != FS_IN_ISDIR);
+ BUILD_BUG_ON(IN_ONESHOT != FS_IN_ONESHOT);
+
+ BUG_ON(hweight32(ALL_INOTIFY_BITS) != 21);
+
inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark, SLAB_PANIC);
event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index b74f2ef2c3686..d33041e2a42a6 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -73,6 +73,15 @@ struct inotify_event {
#ifdef __KERNEL__
#include <linux/sysctl.h>
extern struct ctl_table inotify_table[]; /* for sysctl */
+
+#define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
+ IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
+ IN_MOVED_TO | IN_CREATE | IN_DELETE | \
+ IN_DELETE_SELF | IN_MOVE_SELF | IN_UNMOUNT | \
+ IN_Q_OVERFLOW | IN_IGNORED | IN_ONLYDIR | \
+ IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
+ IN_ISDIR | IN_ONESHOT)
+
#endif
#endif /* _LINUX_INOTIFY_H */
--
GitLab
From 44b350fc23e36e95c8e042b7ded66217ea2b9d72 Mon Sep 17 00:00:00 2001
From: Jerome Marchand <jmarchan@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 152/863] inotify: Fix mask checks
The mask checks in inotify_update_existing_watch() and
inotify_new_watch() are useless because inotify_arg_to_mask() sets
FS_IN_IGNORED and FS_EVENT_ON_CHILD bits anyway.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_user.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index c8203ce28ab7c..7dc940c869b68 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -566,7 +566,7 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
- if (unlikely(!mask))
+ if (unlikely(!(mask & IN_ALL_EVENTS)))
return -EINVAL;
fsn_mark = fsnotify_find_inode_mark(group, inode);
@@ -624,7 +624,7 @@ static int inotify_new_watch(struct fsnotify_group *group,
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
- if (unlikely(!mask))
+ if (unlikely(!(mask & IN_ALL_EVENTS)))
return -EINVAL;
tmp_i_mark = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
--
GitLab
From 20dee624ca40db227aa70cb3f44d2d6cb4fdbab4 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 153/863] fsnotify: check to make sure all fsnotify bits are
unique
This patch adds a check to make sure that all fsnotify bits are unique and we
cannot accidentally use the same bit for 2 different fsnotify event types.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 2 ++
include/linux/fsnotify_backend.h | 9 +++++++++
2 files changed, 11 insertions(+)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 9810babb1a3be..076c10e959d50 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -275,6 +275,8 @@ EXPORT_SYMBOL_GPL(fsnotify);
static __init int fsnotify_init(void)
{
+ BUG_ON(hweight32(ALL_FSNOTIFY_EVENTS) != 23);
+
return init_srcu_struct(&fsnotify_grp_srcu);
}
subsys_initcall(fsnotify_init);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 4b809fcd4996e..a46355db1e47e 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -64,6 +64,15 @@
#define FS_MOVE (FS_MOVED_FROM | FS_MOVED_TO)
+#define ALL_FSNOTIFY_EVENTS (FS_ACCESS | FS_MODIFY | FS_ATTRIB | \
+ FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN | \
+ FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE | \
+ FS_DELETE | FS_DELETE_SELF | FS_MOVE_SELF | \
+ FS_UNMOUNT | FS_Q_OVERFLOW | FS_IN_IGNORED | \
+ FS_OPEN_PERM | FS_ACCESS_PERM | FS_EXCL_UNLINK | \
+ FS_IN_ISDIR | FS_IN_ONESHOT | FS_DN_RENAME | \
+ FS_DN_MULTISHOT | FS_EVENT_ON_CHILD)
+
struct fsnotify_group;
struct fsnotify_event;
struct fsnotify_mark;
--
GitLab
From 80af2588676483ac4e998b5092e9d008dab3ab62 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 154/863] fanotify: groups can specify their f_flags for new fd
Currently fanotify fds opened for thier listeners are done with f_flags
equal to O_RDONLY | O_LARGEFILE. This patch instead takes f_flags from the
fanotify_init syscall and uses those when opening files in the context of
the listener.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify_user.c | 6 ++----
include/linux/fsnotify_backend.h | 7 +++++--
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index da01091f93ebf..7182c83be90ef 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -81,7 +81,7 @@ static int create_fd(struct fsnotify_group *group, struct fsnotify_event *event)
* are NULL; That's fine, just don't call dentry open */
if (dentry && mnt)
new_file = dentry_open(dentry, mnt,
- O_RDONLY | O_LARGEFILE | FMODE_NONOTIFY,
+ group->fanotify_data.f_flags | FMODE_NONOTIFY,
current_cred());
else
new_file = ERR_PTR(-EOVERFLOW);
@@ -625,9 +625,6 @@ SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
pr_debug("%s: flags=%d event_f_flags=%d\n",
__func__, flags, event_f_flags);
- if (event_f_flags)
- return -EINVAL;
-
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
@@ -645,6 +642,7 @@ SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
if (IS_ERR(group))
return PTR_ERR(group);
+ group->fanotify_data.f_flags = event_f_flags;
#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
mutex_init(&group->fanotify_data.access_mutex);
init_waitqueue_head(&group->fanotify_data.access_waitq);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index a46355db1e47e..a83859d7d36ef 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -169,14 +169,17 @@ struct fsnotify_group {
struct user_struct *user;
} inotify_data;
#endif
-#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+#ifdef CONFIG_FANOTIFY
struct fanotify_group_private_data {
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
/* allows a group to block waiting for a userspace response */
struct mutex access_mutex;
struct list_head access_list;
wait_queue_head_t access_waitq;
+#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
+ int f_flags;
} fanotify_data;
-#endif
+#endif /* CONFIG_FANOTIFY */
};
};
--
GitLab
From 5ba08e2eeb06355f66ed62ae97bb87d145973a9a Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 155/863] fsnotify: add pr_debug throughout
It can be hard to debug fsnotify since there are so few printks. Use
pr_debug to allow for dynamic debugging.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 4 ++++
fs/notify/inotify/inotify_fsnotify.c | 6 ++++++
fs/notify/inotify/inotify_user.c | 10 ++++++++++
fs/notify/notification.c | 13 +++++++++++++
4 files changed, 33 insertions(+)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 076c10e959d50..72aae40453147 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -174,6 +174,10 @@ static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
int data_is, u32 cookie, const unsigned char *file_name,
struct fsnotify_event **event)
{
+ pr_debug("%s: group=%p to_tell=%p mnt=%p mask=%x data=%p data_is=%d"
+ " cookie=%d event=%p\n", __func__, group, to_tell, mnt,
+ mask, data, data_is, cookie, *event);
+
if (!group->ops->should_send_event(group, to_tell, mnt, mask,
data, data_is))
return 0;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 9d332e7f5a5c5..906b72761b176 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -98,6 +98,9 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
struct fsnotify_event_private_data *fsn_event_priv;
int wd, ret;
+ pr_debug("%s: group=%p event=%p to_tell=%p mask=%x\n", __func__, group,
+ event, event->to_tell, event->mask);
+
to_tell = event->to_tell;
fsn_mark = fsnotify_find_inode_mark(group, to_tell);
@@ -151,6 +154,9 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
struct fsnotify_mark *fsn_mark;
bool send;
+ pr_debug("%s: group=%p inode=%p mask=%x data=%p data_type=%d\n",
+ __func__, group, inode, mask, data, data_type);
+
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
return false;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 7dc940c869b68..1068e1ca9cb0c 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -141,6 +141,8 @@ static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
event = fsnotify_peek_notify_event(group);
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
if (event->name_len)
event_size += roundup(event->name_len + 1, event_size);
@@ -170,6 +172,8 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
size_t event_size = sizeof(struct inotify_event);
size_t name_len = 0;
+ pr_debug("%s: group=%p event=%p\n", __func__, group, event);
+
/* we get the inotify watch descriptor from the event private data */
spin_lock(&event->lock);
fsn_priv = fsnotify_remove_priv_from_event(group, event);
@@ -242,6 +246,8 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
kevent = get_one_event(group, count);
mutex_unlock(&group->notification_mutex);
+ pr_debug("%s: group=%p kevent=%p\n", __func__, group, kevent);
+
if (kevent) {
ret = PTR_ERR(kevent);
if (IS_ERR(kevent))
@@ -286,6 +292,8 @@ static int inotify_release(struct inode *ignored, struct file *file)
struct fsnotify_group *group = file->private_data;
struct user_struct *user = group->inotify_data.user;
+ pr_debug("%s: group=%p\n", __func__, group);
+
fsnotify_clear_marks_by_group(group);
/* free this group, matching get was inotify_init->fsnotify_obtain_group */
@@ -309,6 +317,8 @@ static long inotify_ioctl(struct file *file, unsigned int cmd,
group = file->private_data;
p = (void __user *) arg;
+ pr_debug("%s: group=%p cmd=%u\n", __func__, group, cmd);
+
switch (cmd) {
case FIONREAD:
mutex_lock(&group->notification_mutex);
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index b35faafacd383..e6dde25fb99ba 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -87,6 +87,8 @@ void fsnotify_put_event(struct fsnotify_event *event)
return;
if (atomic_dec_and_test(&event->refcnt)) {
+ pr_debug("%s: event=%p\n", __func__, event);
+
if (event->data_type == FSNOTIFY_EVENT_PATH)
path_put(&event->path);
@@ -146,6 +148,8 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
struct list_head *list = &group->notification_list;
int rc = 0;
+ pr_debug("%s: group=%p event=%p priv=%p\n", __func__, group, event, priv);
+
/*
* There is one fsnotify_event_holder embedded inside each fsnotify_event.
* Check if we expect to be able to use that holder. If not alloc a new
@@ -222,6 +226,8 @@ struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group
BUG_ON(!mutex_is_locked(&group->notification_mutex));
+ pr_debug("%s: group=%p\n", __func__, group);
+
holder = list_first_entry(&group->notification_list, struct fsnotify_event_holder, event_list);
event = holder->event;
@@ -307,6 +313,8 @@ int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
SPINLOCK_NEW,
};
+ pr_debug("%s: old_event=%p new_event=%p\n", __func__, old_event, new_event);
+
/*
* if the new_event's embedded holder is in use someone
* screwed up and didn't give us a clean new event.
@@ -340,6 +348,8 @@ struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event)
if (!event)
return NULL;
+ pr_debug("%s: old_event=%p new_event=%p\n", __func__, old_event, event);
+
memcpy(event, old_event, sizeof(*event));
initialize_event(event);
@@ -379,6 +389,9 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
if (!event)
return NULL;
+ pr_debug("%s: event=%p to_tell=%p mask=%x data=%p data_type=%d\n",
+ __func__, event, to_tell, mask, data, data_type);
+
initialize_event(event);
if (name) {
--
GitLab
From f70ab54cc6c3907b0727ba332b3976f80f3846d0 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 156/863] fsnotify: fsnotify_add_notify_event should return an
event
Rather than the horrific void ** argument and such just to pass the
fanotify_merge event back to the caller of fsnotify_add_notify_event() have
those things return an event if it was different than the event suggusted to
be added.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 103 ++++++++++++---------------
fs/notify/inotify/inotify_fsnotify.c | 28 ++++----
fs/notify/inotify/inotify_user.c | 11 ++-
fs/notify/notification.c | 42 +++++++----
include/linux/fsnotify_backend.h | 12 ++--
5 files changed, 101 insertions(+), 95 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index bbcfccd4a8ea7..f3c40c0e2b867 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -30,65 +30,58 @@ static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
return false;
}
-/* Note, if we return an event in *arg that a reference is being held... */
-static int fanotify_merge(struct list_head *list,
- struct fsnotify_event *event,
- void **arg)
+/* and the list better be locked by something too! */
+static struct fsnotify_event *fanotify_merge(struct list_head *list,
+ struct fsnotify_event *event)
{
struct fsnotify_event_holder *test_holder;
- struct fsnotify_event *test_event;
+ struct fsnotify_event *test_event = NULL;
struct fsnotify_event *new_event;
- struct fsnotify_event **return_event = (struct fsnotify_event **)arg;
- int ret = 0;
pr_debug("%s: list=%p event=%p\n", __func__, list, event);
- *return_event = NULL;
-
- /* and the list better be locked by something too! */
list_for_each_entry_reverse(test_holder, list, event_list) {
- test_event = test_holder->event;
- if (should_merge(test_event, event)) {
- fsnotify_get_event(test_event);
- *return_event = test_event;
-
- ret = -EEXIST;
- /* if they are exactly the same we are done */
- if (test_event->mask == event->mask)
- goto out;
-
- /*
- * if the refcnt == 1 this is the only queue
- * for this event and so we can update the mask
- * in place.
- */
- if (atomic_read(&test_event->refcnt) == 1) {
- test_event->mask |= event->mask;
- goto out;
- }
-
- /* can't allocate memory, merge was no possible */
- new_event = fsnotify_clone_event(test_event);
- if (unlikely(!new_event)) {
- ret = 0;
- goto out;
- }
-
- /* we didn't return the test_event, so drop that ref */
- fsnotify_put_event(test_event);
- /* the reference we return on new_event is from clone */
- *return_event = new_event;
-
- /* build new event and replace it on the list */
- new_event->mask = (test_event->mask | event->mask);
- fsnotify_replace_event(test_holder, new_event);
-
+ if (should_merge(test_holder->event, event)) {
+ test_event = test_holder->event;
break;
}
}
-out:
- return ret;
+
+ if (!test_event)
+ return NULL;
+
+ fsnotify_get_event(test_event);
+
+ /* if they are exactly the same we are done */
+ if (test_event->mask == event->mask)
+ return test_event;
+
+ /*
+ * if the refcnt == 2 this is the only queue
+ * for this event and so we can update the mask
+ * in place.
+ */
+ if (atomic_read(&test_event->refcnt) == 2) {
+ test_event->mask |= event->mask;
+ return test_event;
+ }
+
+ new_event = fsnotify_clone_event(test_event);
+
+ /* done with test_event */
+ fsnotify_put_event(test_event);
+
+ /* couldn't allocate memory, merge was not possible */
+ if (unlikely(!new_event))
+ return ERR_PTR(-ENOMEM);
+
+ /* build new event and replace it on the list */
+ new_event->mask = (test_event->mask | event->mask);
+ fsnotify_replace_event(test_holder, new_event);
+
+ /* we hold a reference on new_event from clone_event */
+ return new_event;
}
#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
@@ -123,7 +116,7 @@ static int fanotify_get_response_from_access(struct fsnotify_group *group,
static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
{
- int ret;
+ int ret = 0;
struct fsnotify_event *notify_event = NULL;
BUILD_BUG_ON(FAN_ACCESS != FS_ACCESS);
@@ -138,13 +131,9 @@ static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_e
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- ret = fsnotify_add_notify_event(group, event, NULL, fanotify_merge,
- (void **)¬ify_event);
- /* -EEXIST means this event was merged with another, not that it was an error */
- if (ret == -EEXIST)
- ret = 0;
- if (ret)
- goto out;
+ notify_event = fsnotify_add_notify_event(group, event, NULL, fanotify_merge);
+ if (IS_ERR(notify_event))
+ return PTR_ERR(notify_event);
#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
if (event->mask & FAN_ALL_PERM_EVENTS) {
@@ -155,9 +144,9 @@ static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_e
}
#endif
-out:
if (notify_event)
fsnotify_put_event(notify_event);
+
return ret;
}
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 906b72761b176..73a1106b3542d 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -68,13 +68,11 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new
return false;
}
-static int inotify_merge(struct list_head *list,
- struct fsnotify_event *event,
- void **arg)
+static struct fsnotify_event *inotify_merge(struct list_head *list,
+ struct fsnotify_event *event)
{
struct fsnotify_event_holder *last_holder;
struct fsnotify_event *last_event;
- int ret = 0;
/* and the list better be locked by something too */
spin_lock(&event->lock);
@@ -82,11 +80,13 @@ static int inotify_merge(struct list_head *list,
last_holder = list_entry(list->prev, struct fsnotify_event_holder, event_list);
last_event = last_holder->event;
if (event_compare(last_event, event))
- ret = -EEXIST;
+ fsnotify_get_event(last_event);
+ else
+ last_event = NULL;
spin_unlock(&event->lock);
- return ret;
+ return last_event;
}
static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
@@ -96,7 +96,8 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
struct inode *to_tell;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
- int wd, ret;
+ struct fsnotify_event *added_event;
+ int wd, ret = 0;
pr_debug("%s: group=%p event=%p to_tell=%p mask=%x\n", __func__, group,
event, event->to_tell, event->mask);
@@ -120,14 +121,13 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
fsn_event_priv->group = group;
event_priv->wd = wd;
- ret = fsnotify_add_notify_event(group, event, fsn_event_priv, inotify_merge, NULL);
- if (ret) {
+ added_event = fsnotify_add_notify_event(group, event, fsn_event_priv, inotify_merge);
+ if (added_event) {
inotify_free_event_priv(fsn_event_priv);
- /* EEXIST says we tail matched, EOVERFLOW isn't something
- * to report up the stack. */
- if ((ret == -EEXIST) ||
- (ret == -EOVERFLOW))
- ret = 0;
+ if (!IS_ERR(added_event))
+ fsnotify_put_event(added_event);
+ else
+ ret = PTR_ERR(added_event);
}
if (fsn_mark->mask & IN_ONESHOT)
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 1068e1ca9cb0c..a4cd227c4c76f 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -516,7 +516,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark,
struct fsnotify_group *group)
{
struct inotify_inode_mark *i_mark;
- struct fsnotify_event *ignored_event;
+ struct fsnotify_event *ignored_event, *notify_event;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
int ret;
@@ -538,9 +538,14 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark,
fsn_event_priv->group = group;
event_priv->wd = i_mark->wd;
- ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv, NULL, NULL);
- if (ret)
+ notify_event = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv, NULL);
+ if (notify_event) {
+ if (IS_ERR(notify_event))
+ ret = PTR_ERR(notify_event);
+ else
+ fsnotify_put_event(notify_event);
inotify_free_event_priv(fsn_event_priv);
+ }
skip_send_ignore:
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index e6dde25fb99ba..f39260f8f8656 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -137,16 +137,14 @@ struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnot
* event off the queue to deal with. If the event is successfully added to the
* group's notification queue, a reference is taken on event.
*/
-int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
- struct fsnotify_event_private_data *priv,
- int (*merge)(struct list_head *,
- struct fsnotify_event *,
- void **arg),
- void **arg)
+struct fsnotify_event *fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
+ struct fsnotify_event_private_data *priv,
+ struct fsnotify_event *(*merge)(struct list_head *,
+ struct fsnotify_event *))
{
+ struct fsnotify_event *return_event = NULL;
struct fsnotify_event_holder *holder = NULL;
struct list_head *list = &group->notification_list;
- int rc = 0;
pr_debug("%s: group=%p event=%p priv=%p\n", __func__, group, event, priv);
@@ -162,27 +160,37 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
alloc_holder:
holder = fsnotify_alloc_event_holder();
if (!holder)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
}
mutex_lock(&group->notification_mutex);
if (group->q_len >= group->max_events) {
event = q_overflow_event;
- rc = -EOVERFLOW;
+
+ /*
+ * we need to return the overflow event
+ * which means we need a ref
+ */
+ fsnotify_get_event(event);
+ return_event = event;
+
/* sorry, no private data on the overflow event */
priv = NULL;
}
if (!list_empty(list) && merge) {
- int ret;
+ struct fsnotify_event *tmp;
- ret = merge(list, event, arg);
- if (ret) {
+ tmp = merge(list, event);
+ if (tmp) {
mutex_unlock(&group->notification_mutex);
+
+ if (return_event)
+ fsnotify_put_event(return_event);
if (holder != &event->holder)
fsnotify_destroy_event_holder(holder);
- return ret;
+ return tmp;
}
}
@@ -197,6 +205,12 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
* event holder was used, go back and get a new one */
spin_unlock(&event->lock);
mutex_unlock(&group->notification_mutex);
+
+ if (return_event) {
+ fsnotify_put_event(return_event);
+ return_event = NULL;
+ }
+
goto alloc_holder;
}
@@ -211,7 +225,7 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
mutex_unlock(&group->notification_mutex);
wake_up(&group->notification_waitq);
- return rc;
+ return return_event;
}
/*
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index a83859d7d36ef..564b5ea4a831f 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -379,13 +379,11 @@ extern struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struc
struct fsnotify_event *event);
/* attach the event to the group notification queue */
-extern int fsnotify_add_notify_event(struct fsnotify_group *group,
- struct fsnotify_event *event,
- struct fsnotify_event_private_data *priv,
- int (*merge)(struct list_head *,
- struct fsnotify_event *,
- void **),
- void **arg);
+extern struct fsnotify_event *fsnotify_add_notify_event(struct fsnotify_group *group,
+ struct fsnotify_event *event,
+ struct fsnotify_event_private_data *priv,
+ struct fsnotify_event *(*merge)(struct list_head *,
+ struct fsnotify_event *));
/* true if the group notification queue is empty */
extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group);
/* return, but do not dequeue the first event on the notification queue */
--
GitLab
From 3bcf3860a4ff9bbc522820b4b765e65e4deceb3e Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:37 -0400
Subject: [PATCH 157/863] fsnotify: store struct file not struct path
Al explains that calling dentry_open() with a mnt/dentry pair is only
garunteed to be safe if they are already used in an open struct file. To
make sure this is the case don't store and use a struct path in fsnotify,
always use a struct file.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 8 +++---
fs/notify/fanotify/fanotify_user.c | 6 ++---
fs/notify/fsnotify.c | 16 ++++++------
fs/notify/inotify/inotify_fsnotify.c | 12 ++++-----
fs/notify/notification.c | 20 +++++++--------
include/linux/fsnotify.h | 37 ++++++++++++----------------
include/linux/fsnotify_backend.h | 16 ++++++------
kernel/audit_watch.c | 4 +--
8 files changed, 56 insertions(+), 63 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index f3c40c0e2b867..c2a3029052bca 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -17,9 +17,9 @@ static bool should_merge(struct fsnotify_event *old, struct fsnotify_event *new)
old->data_type == new->data_type &&
old->tgid == new->tgid) {
switch (old->data_type) {
- case (FSNOTIFY_EVENT_PATH):
- if ((old->path.mnt == new->path.mnt) &&
- (old->path.dentry == new->path.dentry))
+ case (FSNOTIFY_EVENT_FILE):
+ if ((old->file->f_path.mnt == new->file->f_path.mnt) &&
+ (old->file->f_path.dentry == new->file->f_path.dentry))
return true;
case (FSNOTIFY_EVENT_NONE):
return true;
@@ -226,7 +226,7 @@ static bool fanotify_should_send_event(struct fsnotify_group *group, struct inod
return false;
/* if we don't have enough info to send an event to userspace say no */
- if (data_type != FSNOTIFY_EVENT_PATH)
+ if (data_type != FSNOTIFY_EVENT_FILE)
return false;
if (mnt)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 7182c83be90ef..50cea74bf1c8c 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -65,7 +65,7 @@ static int create_fd(struct fsnotify_group *group, struct fsnotify_event *event)
if (client_fd < 0)
return client_fd;
- if (event->data_type != FSNOTIFY_EVENT_PATH) {
+ if (event->data_type != FSNOTIFY_EVENT_FILE) {
WARN_ON(1);
put_unused_fd(client_fd);
return -EINVAL;
@@ -75,8 +75,8 @@ static int create_fd(struct fsnotify_group *group, struct fsnotify_event *event)
* we need a new file handle for the userspace program so it can read even if it was
* originally opened O_WRONLY.
*/
- dentry = dget(event->path.dentry);
- mnt = mntget(event->path.mnt);
+ dentry = dget(event->file->f_path.dentry);
+ mnt = mntget(event->file->f_path.mnt);
/* it's possible this event was an overflow event. in that case dentry and mnt
* are NULL; That's fine, just don't call dentry open */
if (dentry && mnt)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 72aae40453147..4788c866473a1 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -84,7 +84,7 @@ void __fsnotify_update_child_dentry_flags(struct inode *inode)
}
/* Notify this dentry's parent about a child's events. */
-void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
+void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
{
struct dentry *parent;
struct inode *p_inode;
@@ -92,7 +92,7 @@ void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
bool should_update_children = false;
if (!dentry)
- dentry = path->dentry;
+ dentry = file->f_path.dentry;
if (!(dentry->d_flags & DCACHE_FSNOTIFY_PARENT_WATCHED))
return;
@@ -124,8 +124,8 @@ void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
* specifies these are events which came from a child. */
mask |= FS_EVENT_ON_CHILD;
- if (path)
- fsnotify(p_inode, mask, path, FSNOTIFY_EVENT_PATH,
+ if (file)
+ fsnotify(p_inode, mask, file, FSNOTIFY_EVENT_FILE,
dentry->d_name.name, 0);
else
fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
@@ -154,10 +154,10 @@ void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
spin_unlock(&inode->i_lock);
}
- if (data_is == FSNOTIFY_EVENT_PATH) {
+ if (data_is == FSNOTIFY_EVENT_FILE) {
struct vfsmount *mnt;
- mnt = ((struct path *)data)->mnt;
+ mnt = ((struct file *)data)->f_path.mnt;
if (mnt && !hlist_empty(&mnt->mnt_fsnotify_marks)) {
spin_lock(&mnt->mnt_root->d_lock);
hlist_for_each_entry(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
@@ -228,8 +228,8 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
!(test_mask & fsnotify_vfsmount_mask))
return 0;
- if (data_is == FSNOTIFY_EVENT_PATH)
- mnt = ((struct path *)data)->mnt;
+ if (data_is == FSNOTIFY_EVENT_FILE)
+ mnt = ((struct file *)data)->f_path.mnt;
/* if this inode's directed listeners don't care and nothing on the vfsmount
* listeners list cares, nothing to do */
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 73a1106b3542d..3c506e0364cc4 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -52,9 +52,9 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new
!strcmp(old->file_name, new->file_name))
return true;
break;
- case (FSNOTIFY_EVENT_PATH):
- if ((old->path.mnt == new->path.mnt) &&
- (old->path.dentry == new->path.dentry))
+ case (FSNOTIFY_EVENT_FILE):
+ if ((old->file->f_path.mnt == new->file->f_path.mnt) &&
+ (old->file->f_path.dentry == new->file->f_path.dentry))
return true;
break;
case (FSNOTIFY_EVENT_NONE):
@@ -165,10 +165,10 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
send = (fsn_mark->mask & mask);
if (send && (fsn_mark->mask & FS_EXCL_UNLINK) &&
- (data_type == FSNOTIFY_EVENT_PATH)) {
- struct path *path = data;
+ (data_type == FSNOTIFY_EVENT_FILE)) {
+ struct file *file = data;
- if (d_unlinked(path->dentry))
+ if (d_unlinked(file->f_path.dentry))
send = false;
}
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index f39260f8f8656..c106cdd7ff5eb 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -31,6 +31,7 @@
* allocated and used.
*/
+#include <linux/file.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -89,8 +90,8 @@ void fsnotify_put_event(struct fsnotify_event *event)
if (atomic_dec_and_test(&event->refcnt)) {
pr_debug("%s: event=%p\n", __func__, event);
- if (event->data_type == FSNOTIFY_EVENT_PATH)
- path_put(&event->path);
+ if (event->data_type == FSNOTIFY_EVENT_FILE)
+ fput(event->file);
BUG_ON(!list_empty(&event->private_data_list));
@@ -375,8 +376,8 @@ struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event)
}
}
event->tgid = get_pid(old_event->tgid);
- if (event->data_type == FSNOTIFY_EVENT_PATH)
- path_get(&event->path);
+ if (event->data_type == FSNOTIFY_EVENT_FILE)
+ get_file(event->file);
return event;
}
@@ -423,11 +424,9 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
event->data_type = data_type;
switch (data_type) {
- case FSNOTIFY_EVENT_PATH: {
- struct path *path = data;
- event->path.dentry = path->dentry;
- event->path.mnt = path->mnt;
- path_get(&event->path);
+ case FSNOTIFY_EVENT_FILE: {
+ event->file = data;
+ get_file(event->file);
break;
}
case FSNOTIFY_EVENT_INODE:
@@ -435,8 +434,7 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
break;
case FSNOTIFY_EVENT_NONE:
event->inode = NULL;
- event->path.dentry = NULL;
- event->path.mnt = NULL;
+ event->file = NULL;
break;
default:
BUG();
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 59d0df43ff9d5..e4e2204187ee2 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -26,19 +26,18 @@ static inline void fsnotify_d_instantiate(struct dentry *dentry,
}
/* Notify this dentry's parent about a child's events. */
-static inline void fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
+static inline void fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
{
if (!dentry)
- dentry = path->dentry;
+ dentry = file->f_path.dentry;
- __fsnotify_parent(path, dentry, mask);
+ __fsnotify_parent(file, dentry, mask);
}
/* simple call site for access decisions */
static inline int fsnotify_perm(struct file *file, int mask)
{
- struct path *path = &file->f_path;
- struct inode *inode = path->dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
__u32 fsnotify_mask = 0;
if (file->f_mode & FMODE_NONOTIFY)
@@ -52,7 +51,7 @@ static inline int fsnotify_perm(struct file *file, int mask)
else
BUG();
- return fsnotify(inode, fsnotify_mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ return fsnotify(inode, fsnotify_mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
/*
@@ -187,16 +186,15 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
*/
static inline void fsnotify_access(struct file *file)
{
- struct path *path = &file->f_path;
- struct inode *inode = path->dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
__u32 mask = FS_ACCESS;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
if (!(file->f_mode & FMODE_NONOTIFY)) {
- fsnotify_parent(path, NULL, mask);
- fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ fsnotify_parent(file, NULL, mask);
+ fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
}
@@ -205,16 +203,15 @@ static inline void fsnotify_access(struct file *file)
*/
static inline void fsnotify_modify(struct file *file)
{
- struct path *path = &file->f_path;
- struct inode *inode = path->dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
__u32 mask = FS_MODIFY;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
if (!(file->f_mode & FMODE_NONOTIFY)) {
- fsnotify_parent(path, NULL, mask);
- fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ fsnotify_parent(file, NULL, mask);
+ fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
}
@@ -223,16 +220,15 @@ static inline void fsnotify_modify(struct file *file)
*/
static inline void fsnotify_open(struct file *file)
{
- struct path *path = &file->f_path;
- struct inode *inode = path->dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
__u32 mask = FS_OPEN;
if (S_ISDIR(inode->i_mode))
mask |= FS_IN_ISDIR;
if (!(file->f_mode & FMODE_NONOTIFY)) {
- fsnotify_parent(path, NULL, mask);
- fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ fsnotify_parent(file, NULL, mask);
+ fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
}
@@ -241,7 +237,6 @@ static inline void fsnotify_open(struct file *file)
*/
static inline void fsnotify_close(struct file *file)
{
- struct path *path = &file->f_path;
struct inode *inode = file->f_path.dentry->d_inode;
fmode_t mode = file->f_mode;
__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
@@ -250,8 +245,8 @@ static inline void fsnotify_close(struct file *file)
mask |= FS_IN_ISDIR;
if (!(file->f_mode & FMODE_NONOTIFY)) {
- fsnotify_parent(path, NULL, mask);
- fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+ fsnotify_parent(file, NULL, mask);
+ fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
}
}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 564b5ea4a831f..3410d388163eb 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -223,20 +223,20 @@ struct fsnotify_event {
/* to_tell may ONLY be dereferenced during handle_event(). */
struct inode *to_tell; /* either the inode the event happened to or its parent */
/*
- * depending on the event type we should have either a path or inode
- * We hold a reference on path, but NOT on inode. Since we have the ref on
- * the path, it may be dereferenced at any point during this object's
+ * depending on the event type we should have either a file or inode
+ * We hold a reference on file, but NOT on inode. Since we have the ref on
+ * the file, it may be dereferenced at any point during this object's
* lifetime. That reference is dropped when this object's refcnt hits
- * 0. If this event contains an inode instead of a path, the inode may
+ * 0. If this event contains an inode instead of a file, the inode may
* ONLY be used during handle_event().
*/
union {
- struct path path;
+ struct file *file;
struct inode *inode;
};
/* when calling fsnotify tell it if the data is a path or inode */
#define FSNOTIFY_EVENT_NONE 0
-#define FSNOTIFY_EVENT_PATH 1
+#define FSNOTIFY_EVENT_FILE 1
#define FSNOTIFY_EVENT_INODE 2
int data_type; /* which of the above union we have */
atomic_t refcnt; /* how many groups still are using/need to send this event */
@@ -311,7 +311,7 @@ struct fsnotify_mark {
/* main fsnotify call to send events */
extern int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
const unsigned char *name, u32 cookie);
-extern void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask);
+extern void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask);
extern void __fsnotify_inode_delete(struct inode *inode);
extern void __fsnotify_vfsmount_delete(struct vfsmount *mnt);
extern u32 fsnotify_get_cookie(void);
@@ -444,7 +444,7 @@ static inline int fsnotify(struct inode *to_tell, __u32 mask, void *data, int da
return 0;
}
-static inline void __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
+static inline void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
{}
static inline void __fsnotify_inode_delete(struct inode *inode)
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 7499397a61003..b955a22d8ff19 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -545,8 +545,8 @@ static int audit_watch_handle_event(struct fsnotify_group *group, struct fsnotif
return 0;
switch (event->data_type) {
- case (FSNOTIFY_EVENT_PATH):
- inode = event->path.dentry->d_inode;
+ case (FSNOTIFY_EVENT_FILE):
+ inode = event->file->f_path.dentry->d_inode;
break;
case (FSNOTIFY_EVENT_INODE):
inode = event->inode;
--
GitLab
From c1e5c954020e123d30b4abf4038ce501861bcf9f Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 158/863] vfs/fsnotify: fsnotify_close can delay the final work
in fput
fanotify almost works like so:
user context calls fsnotify_* function with a struct file.
fsnotify takes a reference on the struct path
user context goes about it's buissiness
at some later point in time the fsnotify listener gets the struct path
fanotify listener calls dentry_open() to create a file which userspace can deal with
listener drops the reference on the struct path
at some later point the listener calls close() on it's new file
With the switch from struct path to struct file this presents a problem for
fput() and fsnotify_close(). fsnotify_close() is called when the filp has
already reached 0 and __fput() wants to do it's cleanup.
The solution presented here is a bit odd. If an event is created from a
struct file we take a reference on the file. We check however if the f_count
was already 0 and if so we take an EXTRA reference EVEN THOUGH IT WAS ZERO.
In __fput() (where we know the f_count hit 0 once) we check if the f_count is
non-zero and if so we drop that 'extra' ref and return without destroying the
file.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/file_table.c | 9 +++++++++
fs/notify/notification.c | 13 +++++++++++++
2 files changed, 22 insertions(+)
diff --git a/fs/file_table.c b/fs/file_table.c
index 5c7d10ead4ad7..b8a0bb63cbd7c 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -230,6 +230,15 @@ static void __fput(struct file *file)
might_sleep();
fsnotify_close(file);
+
+ /*
+ * fsnotify_create_event may have taken one or more references on this
+ * file. If it did so it left one reference for us to drop to make sure
+ * its calls to fput could not prematurely destroy the file.
+ */
+ if (atomic_long_read(&file->f_count))
+ return fput(file);
+
/*
* The function eventpoll_release() should be the first called
* in the file cleanup chain.
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index c106cdd7ff5eb..d6c435adc7a21 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -426,6 +426,19 @@ struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
switch (data_type) {
case FSNOTIFY_EVENT_FILE: {
event->file = data;
+ /*
+ * if this file is about to disappear hold an extra reference
+ * until we return to __fput so we don't have to worry about
+ * future get/put destroying the file under us or generating
+ * additional events. Notice that we change f_mode without
+ * holding f_lock. This is safe since this is the only possible
+ * reference to this object in the kernel (it was about to be
+ * freed, remember?)
+ */
+ if (!atomic_long_read(&event->file->f_count)) {
+ event->file->f_mode |= FMODE_NONOTIFY;
+ get_file(event->file);
+ }
get_file(event->file);
break;
}
--
GitLab
From 0c6532e4e3b0c8bd18dd0a5cc1894a1944997cc6 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 159/863] fsnotify: place marks on object in order of group
memory address
fsnotify_marks currently are placed on objects (inodes or vfsmounts) in
arbitrary order. This patch places them in order of the group memory address.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inode_mark.c | 40 ++++++++++++++++++++++++++++-----------
fs/notify/vfsmount_mark.c | 40 +++++++++++++++++++++++++--------------
2 files changed, 55 insertions(+), 25 deletions(-)
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 0c0a48b1659ff..83ce6db340396 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -174,15 +174,17 @@ void fsnotify_set_inode_mark_mask_locked(struct fsnotify_mark *mark,
}
/*
- * Attach an initialized mark to a given group and inode.
+ * Attach an initialized mark to a given inode.
* These marks may be used for the fsnotify backend to determine which
- * event types should be delivered to which group and for which inodes.
+ * event types should be delivered to which group and for which inodes. These
+ * marks are ordered according to the group's location in memory.
*/
int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
struct fsnotify_group *group, struct inode *inode,
int allow_dups)
{
- struct fsnotify_mark *lmark = NULL;
+ struct fsnotify_mark *lmark;
+ struct hlist_node *node, *last = NULL;
int ret = 0;
mark->flags = FSNOTIFY_MARK_FLAG_INODE;
@@ -192,21 +194,37 @@ int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
spin_lock(&inode->i_lock);
- if (!allow_dups)
- lmark = fsnotify_find_inode_mark_locked(group, inode);
- if (!lmark) {
- mark->i.inode = inode;
+ mark->i.inode = inode;
+ /* is mark the first mark? */
+ if (hlist_empty(&inode->i_fsnotify_marks)) {
hlist_add_head(&mark->i.i_list, &inode->i_fsnotify_marks);
+ goto out;
+ }
+
+ /* should mark be in the middle of the current list? */
+ hlist_for_each_entry(lmark, node, &inode->i_fsnotify_marks, i.i_list) {
+ last = node;
+
+ if ((lmark->group == group) && !allow_dups) {
+ ret = -EEXIST;
+ goto out;
+ }
- fsnotify_recalc_inode_mask_locked(inode);
+ if (mark->group < lmark->group)
+ continue;
+
+ hlist_add_before(&mark->i.i_list, &lmark->i.i_list);
+ goto out;
}
+ BUG_ON(last == NULL);
+ /* mark should be the last entry. last is the current last entry */
+ hlist_add_after(last, &mark->i.i_list);
+out:
+ fsnotify_recalc_inode_mask_locked(inode);
spin_unlock(&inode->i_lock);
- if (lmark)
- ret = -EEXIST;
-
return ret;
}
diff --git a/fs/notify/vfsmount_mark.c b/fs/notify/vfsmount_mark.c
index ec580a25d2938..c4b3f14d25307 100644
--- a/fs/notify/vfsmount_mark.c
+++ b/fs/notify/vfsmount_mark.c
@@ -141,34 +141,46 @@ int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
struct fsnotify_group *group, struct vfsmount *mnt,
int allow_dups)
{
- struct fsnotify_mark *lmark = NULL;
+ struct fsnotify_mark *lmark;
+ struct hlist_node *node, *last = NULL;
int ret = 0;
mark->flags = FSNOTIFY_MARK_FLAG_VFSMOUNT;
- /*
- * LOCKING ORDER!!!!
- * mark->lock
- * group->mark_lock
- * mnt->mnt_root->d_lock
- */
assert_spin_locked(&mark->lock);
assert_spin_locked(&group->mark_lock);
spin_lock(&mnt->mnt_root->d_lock);
- if (!allow_dups)
- lmark = fsnotify_find_vfsmount_mark_locked(group, mnt);
- if (!lmark) {
- mark->m.mnt = mnt;
+ mark->m.mnt = mnt;
+ /* is mark the first mark? */
+ if (hlist_empty(&mnt->mnt_fsnotify_marks)) {
hlist_add_head(&mark->m.m_list, &mnt->mnt_fsnotify_marks);
+ goto out;
+ }
+
+ /* should mark be in the middle of the current list? */
+ hlist_for_each_entry(lmark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
+ last = node;
+
+ if ((lmark->group == group) && !allow_dups) {
+ ret = -EEXIST;
+ goto out;
+ }
+
+ if (mark->group < lmark->group)
+ continue;
- fsnotify_recalc_vfsmount_mask_locked(mnt);
- } else {
- ret = -EEXIST;
+ hlist_add_before(&mark->m.m_list, &lmark->m.m_list);
+ goto out;
}
+ BUG_ON(last == NULL);
+ /* mark should be the last entry. last is the current last entry */
+ hlist_add_after(last, &mark->m.m_list);
+out:
+ fsnotify_recalc_vfsmount_mask_locked(mnt);
spin_unlock(&mnt->mnt_root->d_lock);
return ret;
--
GitLab
From a4c6e9961fcb9da54648d98978d33c6fdcb7bb45 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 160/863] fsnotify: use _rcu functions for mark list traversal
In preparation for srcu locking use all _rcu appropiete functions for mark
list addition, removal, and traversal. The operations are still done under a
spinlock at the end of this patch.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inode_mark.c | 10 +++++-----
fs/notify/vfsmount_mark.c | 10 +++++-----
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 83ce6db340396..455cb41c729b7 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -67,7 +67,7 @@ void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark)
spin_lock(&inode->i_lock);
- hlist_del_init(&mark->i.i_list);
+ hlist_del_init_rcu(&mark->i.i_list);
mark->i.inode = NULL;
/*
@@ -92,7 +92,7 @@ void fsnotify_clear_marks_by_inode(struct inode *inode)
spin_lock(&inode->i_lock);
hlist_for_each_entry_safe(mark, pos, n, &inode->i_fsnotify_marks, i.i_list) {
list_add(&mark->i.free_i_list, &free_list);
- hlist_del_init(&mark->i.i_list);
+ hlist_del_init_rcu(&mark->i.i_list);
fsnotify_get_mark(mark);
}
spin_unlock(&inode->i_lock);
@@ -198,7 +198,7 @@ int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
/* is mark the first mark? */
if (hlist_empty(&inode->i_fsnotify_marks)) {
- hlist_add_head(&mark->i.i_list, &inode->i_fsnotify_marks);
+ hlist_add_head_rcu(&mark->i.i_list, &inode->i_fsnotify_marks);
goto out;
}
@@ -214,13 +214,13 @@ int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
if (mark->group < lmark->group)
continue;
- hlist_add_before(&mark->i.i_list, &lmark->i.i_list);
+ hlist_add_before_rcu(&mark->i.i_list, &lmark->i.i_list);
goto out;
}
BUG_ON(last == NULL);
/* mark should be the last entry. last is the current last entry */
- hlist_add_after(last, &mark->i.i_list);
+ hlist_add_after_rcu(last, &mark->i.i_list);
out:
fsnotify_recalc_inode_mask_locked(inode);
spin_unlock(&inode->i_lock);
diff --git a/fs/notify/vfsmount_mark.c b/fs/notify/vfsmount_mark.c
index c4b3f14d25307..b7ae64030021c 100644
--- a/fs/notify/vfsmount_mark.c
+++ b/fs/notify/vfsmount_mark.c
@@ -39,7 +39,7 @@ void fsnotify_clear_marks_by_mount(struct vfsmount *mnt)
spin_lock(&mnt->mnt_root->d_lock);
hlist_for_each_entry_safe(mark, pos, n, &mnt->mnt_fsnotify_marks, m.m_list) {
list_add(&mark->m.free_m_list, &free_list);
- hlist_del_init(&mark->m.m_list);
+ hlist_del_init_rcu(&mark->m.m_list);
fsnotify_get_mark(mark);
}
spin_unlock(&mnt->mnt_root->d_lock);
@@ -91,7 +91,7 @@ void fsnotify_destroy_vfsmount_mark(struct fsnotify_mark *mark)
spin_lock(&mnt->mnt_root->d_lock);
- hlist_del_init(&mark->m.m_list);
+ hlist_del_init_rcu(&mark->m.m_list);
mark->m.mnt = NULL;
fsnotify_recalc_vfsmount_mask_locked(mnt);
@@ -156,7 +156,7 @@ int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
/* is mark the first mark? */
if (hlist_empty(&mnt->mnt_fsnotify_marks)) {
- hlist_add_head(&mark->m.m_list, &mnt->mnt_fsnotify_marks);
+ hlist_add_head_rcu(&mark->m.m_list, &mnt->mnt_fsnotify_marks);
goto out;
}
@@ -172,13 +172,13 @@ int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
if (mark->group < lmark->group)
continue;
- hlist_add_before(&mark->m.m_list, &lmark->m.m_list);
+ hlist_add_before_rcu(&mark->m.m_list, &lmark->m.m_list);
goto out;
}
BUG_ON(last == NULL);
/* mark should be the last entry. last is the current last entry */
- hlist_add_after(last, &mark->m.m_list);
+ hlist_add_after_rcu(last, &mark->m.m_list);
out:
fsnotify_recalc_vfsmount_mask_locked(mnt);
spin_unlock(&mnt->mnt_root->d_lock);
--
GitLab
From 700307a29ad61090dcf1d45f8f4a135f5e9211ae Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 161/863] fsnotify: use an explicit flag to indicate
fsnotify_destroy_mark has been called
Currently fsnotify check is mark->group is NULL to decide if
fsnotify_destroy_mark() has already been called or not. With the upcoming
rcu work it is a heck of a lot easier to use an explicit flag than worry
about group being set to NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inode_mark.c | 2 +-
fs/notify/mark.c | 11 +++++++----
fs/notify/vfsmount_mark.c | 2 +-
include/linux/fsnotify_backend.h | 1 +
4 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 455cb41c729b7..37b460f302b78 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -187,7 +187,7 @@ int fsnotify_add_inode_mark(struct fsnotify_mark *mark,
struct hlist_node *node, *last = NULL;
int ret = 0;
- mark->flags = FSNOTIFY_MARK_FLAG_INODE;
+ mark->flags |= FSNOTIFY_MARK_FLAG_INODE;
assert_spin_locked(&mark->lock);
assert_spin_locked(&group->mark_lock);
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 8f3b0e7a543de..69c5a166930c1 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -121,12 +121,14 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
group = mark->group;
- /* if !group something else already marked this to die */
- if (!group) {
+ /* something else already called this function on this mark */
+ if (!(mark->flags & FSNOTIFY_MARK_FLAG_ALIVE)) {
spin_unlock(&mark->lock);
return;
}
+ mark->flags &= ~FSNOTIFY_MARK_FLAG_ALIVE;
+
/* 1 from caller and 1 for being on i_list/g_list */
BUG_ON(atomic_read(&mark->refcnt) < 2);
@@ -141,7 +143,6 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
BUG();
list_del_init(&mark->g_list);
- mark->group = NULL;
fsnotify_put_mark(mark); /* for i_list and g_list */
@@ -229,6 +230,8 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
spin_lock(&mark->lock);
spin_lock(&group->mark_lock);
+ mark->flags |= FSNOTIFY_MARK_FLAG_ALIVE;
+
mark->group = group;
list_add(&mark->g_list, &group->marks_list);
atomic_inc(&group->num_marks);
@@ -258,7 +261,7 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
return ret;
err:
- mark->group = NULL;
+ mark->flags &= ~FSNOTIFY_MARK_FLAG_ALIVE;
list_del_init(&mark->g_list);
atomic_dec(&group->num_marks);
fsnotify_put_mark(mark);
diff --git a/fs/notify/vfsmount_mark.c b/fs/notify/vfsmount_mark.c
index b7ae64030021c..56772b578fbd5 100644
--- a/fs/notify/vfsmount_mark.c
+++ b/fs/notify/vfsmount_mark.c
@@ -145,7 +145,7 @@ int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
struct hlist_node *node, *last = NULL;
int ret = 0;
- mark->flags = FSNOTIFY_MARK_FLAG_VFSMOUNT;
+ mark->flags |= FSNOTIFY_MARK_FLAG_VFSMOUNT;
assert_spin_locked(&mark->lock);
assert_spin_locked(&group->mark_lock);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 3410d388163eb..8e24cdf72928e 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -300,6 +300,7 @@ struct fsnotify_mark {
#define FSNOTIFY_MARK_FLAG_VFSMOUNT 0x02
#define FSNOTIFY_MARK_FLAG_OBJECT_PINNED 0x04
#define FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY 0x08
+#define FSNOTIFY_MARK_FLAG_ALIVE 0x10
unsigned int flags; /* vfsmount or inode mark? */
void (*free_mark)(struct fsnotify_mark *mark); /* called on final put+free */
};
--
GitLab
From 75c1be487a690db43da2c1234fcacd84c982803c Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 162/863] fsnotify: srcu to protect read side of inode and
vfsmount locks
Currently reading the inode->i_fsnotify_marks or
vfsmount->mnt_fsnotify_marks lists are protected by a spinlock on both the
read and the write side. This patch protects the read side of those lists
with a new single srcu.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 69 +++++++++++++++++++++-----------
fs/notify/fsnotify.h | 5 ++-
fs/notify/group.c | 16 +++-----
fs/notify/mark.c | 60 +++++++++++++++++++++++++--
include/linux/fsnotify_backend.h | 1 +
5 files changed, 111 insertions(+), 40 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 4788c866473a1..4678b416241e6 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -144,14 +144,15 @@ void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
{
struct fsnotify_mark *mark;
struct hlist_node *node;
+ int idx;
+
+ idx = srcu_read_lock(&fsnotify_mark_srcu);
if (!hlist_empty(&inode->i_fsnotify_marks)) {
- spin_lock(&inode->i_lock);
- hlist_for_each_entry(mark, node, &inode->i_fsnotify_marks, i.i_list) {
+ hlist_for_each_entry_rcu(mark, node, &inode->i_fsnotify_marks, i.i_list) {
if (!(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
mark->ignored_mask = 0;
}
- spin_unlock(&inode->i_lock);
}
if (data_is == FSNOTIFY_EVENT_FILE) {
@@ -159,14 +160,14 @@ void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
mnt = ((struct file *)data)->f_path.mnt;
if (mnt && !hlist_empty(&mnt->mnt_fsnotify_marks)) {
- spin_lock(&mnt->mnt_root->d_lock);
- hlist_for_each_entry(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
+ hlist_for_each_entry_rcu(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
if (!(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
mark->ignored_mask = 0;
}
- spin_unlock(&mnt->mnt_root->d_lock);
}
}
+
+ srcu_read_unlock(&fsnotify_mark_srcu, idx);
}
static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
@@ -208,8 +209,10 @@ static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
const unsigned char *file_name, u32 cookie)
{
+ struct fsnotify_mark *mark;
struct fsnotify_group *group;
struct fsnotify_event *event = NULL;
+ struct hlist_node *node;
struct vfsmount *mnt = NULL;
int idx, ret = 0;
/* global tests shouldn't care about events on child only the specific event */
@@ -237,35 +240,47 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
!needed_by_vfsmount(test_mask, mnt))
return 0;
- /*
- * SRCU!! the groups list is very very much read only and the path is
- * very hot. The VAST majority of events are not going to need to do
- * anything other than walk the list so it's crazy to pre-allocate.
- */
- idx = srcu_read_lock(&fsnotify_grp_srcu);
+ idx = srcu_read_lock(&fsnotify_mark_srcu);
if (test_mask & to_tell->i_fsnotify_mask) {
- list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list) {
- if (test_mask & group->mask) {
- ret = send_to_group(group, to_tell, NULL, mask, data, data_is,
- cookie, file_name, &event);
+ hlist_for_each_entry_rcu(mark, node, &to_tell->i_fsnotify_marks, i.i_list) {
+
+ pr_debug("%s: inode_loop: mark=%p mark->mask=%x mark->ignored_mask=%x\n",
+ __func__, mark, mark->mask, mark->ignored_mask);
+
+ if (test_mask & mark->mask & ~mark->ignored_mask) {
+ group = mark->group;
+ if (!group)
+ continue;
+ ret = send_to_group(group, to_tell, NULL, mask,
+ data, data_is, cookie, file_name,
+ &event);
if (ret)
goto out;
}
}
}
- if (needed_by_vfsmount(test_mask, mnt)) {
- list_for_each_entry_rcu(group, &fsnotify_vfsmount_groups, vfsmount_group_list) {
- if (test_mask & group->mask) {
- ret = send_to_group(group, to_tell, mnt, mask, data, data_is,
- cookie, file_name, &event);
+
+ if (mnt && (test_mask & mnt->mnt_fsnotify_mask)) {
+ hlist_for_each_entry_rcu(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
+
+ pr_debug("%s: mnt_loop: mark=%p mark->mask=%x mark->ignored_mask=%x\n",
+ __func__, mark, mark->mask, mark->ignored_mask);
+
+ if (test_mask & mark->mask & ~mark->ignored_mask) {
+ group = mark->group;
+ if (!group)
+ continue;
+ ret = send_to_group(group, to_tell, mnt, mask,
+ data, data_is, cookie, file_name,
+ &event);
if (ret)
goto out;
}
}
}
out:
- srcu_read_unlock(&fsnotify_grp_srcu, idx);
+ srcu_read_unlock(&fsnotify_mark_srcu, idx);
/*
* fsnotify_create_event() took a reference so the event can't be cleaned
* up while we are still trying to add it to lists, drop that one.
@@ -279,8 +294,14 @@ EXPORT_SYMBOL_GPL(fsnotify);
static __init int fsnotify_init(void)
{
+ int ret;
+
BUG_ON(hweight32(ALL_FSNOTIFY_EVENTS) != 23);
- return init_srcu_struct(&fsnotify_grp_srcu);
+ ret = init_srcu_struct(&fsnotify_mark_srcu);
+ if (ret)
+ panic("initializing fsnotify_mark_srcu");
+
+ return 0;
}
-subsys_initcall(fsnotify_init);
+core_initcall(fsnotify_init);
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index 1be54f6f9e7d7..7eed86f942ba2 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -6,8 +6,6 @@
#include <linux/srcu.h>
#include <linux/types.h>
-/* protects reads of fsnotify_groups */
-extern struct srcu_struct fsnotify_grp_srcu;
/* all groups which receive inode fsnotify events */
extern struct list_head fsnotify_inode_groups;
/* all groups which receive vfsmount fsnotify events */
@@ -20,6 +18,9 @@ extern __u32 fsnotify_vfsmount_mask;
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
+/* protects reads of inode and vfsmount marks list */
+extern struct srcu_struct fsnotify_mark_srcu;
+
extern void fsnotify_set_inode_mark_mask_locked(struct fsnotify_mark *fsn_mark,
__u32 mask);
/* add a mark to an inode */
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 7ac65ed4735ba..48d3a6d6e47ae 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -30,8 +30,6 @@
/* protects writes to fsnotify_groups and fsnotify_mask */
static DEFINE_MUTEX(fsnotify_grp_mutex);
-/* protects reads while running the fsnotify_groups list */
-struct srcu_struct fsnotify_grp_srcu;
/* all groups registered to receive inode filesystem notifications */
LIST_HEAD(fsnotify_inode_groups);
/* all groups registered to receive mount point filesystem notifications */
@@ -50,18 +48,17 @@ void fsnotify_recalc_global_mask(void)
struct fsnotify_group *group;
__u32 inode_mask = 0;
__u32 vfsmount_mask = 0;
- int idx;
- idx = srcu_read_lock(&fsnotify_grp_srcu);
+ mutex_lock(&fsnotify_grp_mutex);
list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list)
inode_mask |= group->mask;
list_for_each_entry_rcu(group, &fsnotify_vfsmount_groups, vfsmount_group_list)
vfsmount_mask |= group->mask;
-
- srcu_read_unlock(&fsnotify_grp_srcu, idx);
fsnotify_inode_mask = inode_mask;
fsnotify_vfsmount_mask = vfsmount_mask;
+
+ mutex_unlock(&fsnotify_grp_mutex);
}
/*
@@ -168,6 +165,8 @@ static void fsnotify_destroy_group(struct fsnotify_group *group)
/* clear all inode marks for this group */
fsnotify_clear_marks_by_group(group);
+ synchronize_srcu(&fsnotify_mark_srcu);
+
/* past the point of no return, matches the initial value of 1 */
if (atomic_dec_and_test(&group->num_marks))
fsnotify_final_destroy_group(group);
@@ -216,12 +215,7 @@ void fsnotify_put_group(struct fsnotify_group *group)
*/
__fsnotify_evict_group(group);
- /*
- * now it's off the list, so the only thing we might care about is
- * srcu access....
- */
mutex_unlock(&fsnotify_grp_mutex);
- synchronize_srcu(&fsnotify_grp_srcu);
/* and now it is really dead. _Nothing_ could be seeing it */
fsnotify_recalc_global_mask();
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 69c5a166930c1..41f3990f900ba 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -85,10 +85,12 @@
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/srcu.h>
#include <linux/writeback.h> /* for inode_lock */
#include <asm/atomic.h>
@@ -96,6 +98,11 @@
#include <linux/fsnotify_backend.h>
#include "fsnotify.h"
+struct srcu_struct fsnotify_mark_srcu;
+static DEFINE_SPINLOCK(destroy_lock);
+static LIST_HEAD(destroy_list);
+static DECLARE_WAIT_QUEUE_HEAD(destroy_waitq);
+
void fsnotify_get_mark(struct fsnotify_mark *mark)
{
atomic_inc(&mark->refcnt);
@@ -144,11 +151,14 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
list_del_init(&mark->g_list);
- fsnotify_put_mark(mark); /* for i_list and g_list */
-
spin_unlock(&group->mark_lock);
spin_unlock(&mark->lock);
+ spin_lock(&destroy_lock);
+ list_add(&mark->destroy_list, &destroy_list);
+ spin_unlock(&destroy_lock);
+ wake_up(&destroy_waitq);
+
/*
* Some groups like to know that marks are being freed. This is a
* callback to the group function to let it know that this mark
@@ -263,12 +273,17 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
err:
mark->flags &= ~FSNOTIFY_MARK_FLAG_ALIVE;
list_del_init(&mark->g_list);
+ mark->group = NULL;
atomic_dec(&group->num_marks);
- fsnotify_put_mark(mark);
spin_unlock(&group->mark_lock);
spin_unlock(&mark->lock);
+ spin_lock(&destroy_lock);
+ list_add(&mark->destroy_list, &destroy_list);
+ spin_unlock(&destroy_lock);
+ wake_up(&destroy_waitq);
+
return ret;
}
@@ -326,3 +341,42 @@ void fsnotify_init_mark(struct fsnotify_mark *mark,
atomic_set(&mark->refcnt, 1);
mark->free_mark = free_mark;
}
+
+static int fsnotify_mark_destroy(void *ignored)
+{
+ struct fsnotify_mark *mark, *next;
+ LIST_HEAD(private_destroy_list);
+
+ for (;;) {
+ spin_lock(&destroy_lock);
+ list_for_each_entry_safe(mark, next, &destroy_list, destroy_list) {
+ list_del(&mark->destroy_list);
+ list_add(&mark->destroy_list, &private_destroy_list);
+ }
+ spin_unlock(&destroy_lock);
+
+ synchronize_srcu(&fsnotify_mark_srcu);
+
+ list_for_each_entry_safe(mark, next, &private_destroy_list, destroy_list) {
+ list_del_init(&mark->destroy_list);
+ fsnotify_put_mark(mark);
+ }
+
+ wait_event_interruptible(destroy_waitq, !list_empty(&destroy_list));
+ }
+
+ return 0;
+}
+
+static int __init fsnotify_mark_init(void)
+{
+ struct task_struct *thread;
+
+ thread = kthread_run(fsnotify_mark_destroy, NULL,
+ "fsnotify_mark");
+ if (IS_ERR(thread))
+ panic("unable to start fsnotify mark destruction thread.");
+
+ return 0;
+}
+device_initcall(fsnotify_mark_init);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 8e24cdf72928e..84159390969f7 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -302,6 +302,7 @@ struct fsnotify_mark {
#define FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY 0x08
#define FSNOTIFY_MARK_FLAG_ALIVE 0x10
unsigned int flags; /* vfsmount or inode mark? */
+ struct list_head destroy_list;
void (*free_mark)(struct fsnotify_mark *mark); /* called on final put+free */
};
--
GitLab
From 8778abb9a88fc4a74d8776ffaadf7214cf33c61e Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 163/863] fsnotify: Exchange list heads instead of moving
elements
Instead of moving list elements from destroy_list to &private_destroy_list,
exchange the list heads.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/mark.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 41f3990f900ba..236f29b066ed0 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -349,10 +349,8 @@ static int fsnotify_mark_destroy(void *ignored)
for (;;) {
spin_lock(&destroy_lock);
- list_for_each_entry_safe(mark, next, &destroy_list, destroy_list) {
- list_del(&mark->destroy_list);
- list_add(&mark->destroy_list, &private_destroy_list);
- }
+ /* exchange the list head */
+ list_replace_init(&destroy_list, &private_destroy_list);
spin_unlock(&destroy_lock);
synchronize_srcu(&fsnotify_mark_srcu);
--
GitLab
From 3a9b16b407f10b2a771bcae13fb5791e527d6bcf Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 164/863] fsnotify: send fsnotify_mark to groups in event
handling functions
With the change of fsnotify to use srcu walking the marks list instead of
walking the global groups list we now know the mark in question. The code can
send the mark to the group's handling functions and the groups won't have to
find those marks themselves.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 4 +++-
fs/notify/fanotify/fanotify.c | 8 +++++---
fs/notify/fsnotify.c | 19 ++++++++++---------
fs/notify/inotify/inotify_fsnotify.c | 8 +++++---
include/linux/fsnotify_backend.h | 7 ++++---
kernel/audit_tree.c | 8 +++++---
kernel/audit_watch.c | 8 +++++---
7 files changed, 37 insertions(+), 25 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 6624c2ee8786f..2cae9be120db2 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -83,6 +83,7 @@ static void dnotify_recalc_inode_mask(struct fsnotify_mark *fsn_mark)
* events.
*/
static int dnotify_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *mark,
struct fsnotify_event *event)
{
struct fsnotify_mark *fsn_mark = NULL;
@@ -130,7 +131,8 @@ static int dnotify_handle_event(struct fsnotify_group *group,
*/
static bool dnotify_should_send_event(struct fsnotify_group *group,
struct inode *inode, struct vfsmount *mnt,
- __u32 mask, void *data, int data_type)
+ struct fsnotify_mark *mark, __u32 mask,
+ void *data, int data_type)
{
struct fsnotify_mark *fsn_mark;
bool send;
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index c2a3029052bca..abfba45abe2c3 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -114,7 +114,9 @@ static int fanotify_get_response_from_access(struct fsnotify_group *group,
}
#endif
-static int fanotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+static int fanotify_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *mark,
+ struct fsnotify_event *event)
{
int ret = 0;
struct fsnotify_event *notify_event = NULL;
@@ -214,8 +216,8 @@ static bool should_send_inode_event(struct fsnotify_group *group, struct inode *
}
static bool fanotify_should_send_event(struct fsnotify_group *group, struct inode *to_tell,
- struct vfsmount *mnt, __u32 mask, void *data,
- int data_type)
+ struct vfsmount *mnt, struct fsnotify_mark *mark,
+ __u32 mask, void *data, int data_type)
{
pr_debug("%s: group=%p to_tell=%p mnt=%p mask=%x data=%p data_type=%d\n",
__func__, group, to_tell, mnt, mask, data, data_type);
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 4678b416241e6..59d639996cad6 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -171,15 +171,16 @@ void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
}
static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
- struct vfsmount *mnt, __u32 mask, void *data,
- int data_is, u32 cookie, const unsigned char *file_name,
+ struct vfsmount *mnt, struct fsnotify_mark *mark,
+ __u32 mask, void *data, int data_is, u32 cookie,
+ const unsigned char *file_name,
struct fsnotify_event **event)
{
- pr_debug("%s: group=%p to_tell=%p mnt=%p mask=%x data=%p data_is=%d"
- " cookie=%d event=%p\n", __func__, group, to_tell, mnt,
- mask, data, data_is, cookie, *event);
+ pr_debug("%s: group=%p to_tell=%p mnt=%p mark=%p mask=%x data=%p"
+ " data_is=%d cookie=%d event=%p\n", __func__, group, to_tell,
+ mnt, mark, mask, data, data_is, cookie, *event);
- if (!group->ops->should_send_event(group, to_tell, mnt, mask,
+ if (!group->ops->should_send_event(group, to_tell, mnt, mark, mask,
data, data_is))
return 0;
if (!*event) {
@@ -189,7 +190,7 @@ static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
if (!*event)
return -ENOMEM;
}
- return group->ops->handle_event(group, *event);
+ return group->ops->handle_event(group, mark, *event);
}
static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
@@ -252,7 +253,7 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
group = mark->group;
if (!group)
continue;
- ret = send_to_group(group, to_tell, NULL, mask,
+ ret = send_to_group(group, to_tell, NULL, mark, mask,
data, data_is, cookie, file_name,
&event);
if (ret)
@@ -271,7 +272,7 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
group = mark->group;
if (!group)
continue;
- ret = send_to_group(group, to_tell, mnt, mask,
+ ret = send_to_group(group, to_tell, mnt, mark, mask,
data, data_is, cookie, file_name,
&event);
if (ret)
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 3c506e0364cc4..dbd76bbb3e219 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -89,7 +89,9 @@ static struct fsnotify_event *inotify_merge(struct list_head *list,
return last_event;
}
-static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+static int inotify_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *mark,
+ struct fsnotify_event *event)
{
struct fsnotify_mark *fsn_mark;
struct inotify_inode_mark *i_mark;
@@ -148,8 +150,8 @@ static void inotify_freeing_mark(struct fsnotify_mark *fsn_mark, struct fsnotify
}
static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, __u32 mask, void *data,
- int data_type)
+ struct vfsmount *mnt, struct fsnotify_mark *mark,
+ __u32 mask, void *data, int data_type)
{
struct fsnotify_mark *fsn_mark;
bool send;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 84159390969f7..225dc0c3a48cc 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -92,9 +92,10 @@ struct fsnotify_event_private_data;
*/
struct fsnotify_ops {
bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, __u32 mask, void *data,
- int data_type);
- int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
+ struct vfsmount *mnt, struct fsnotify_mark *mark,
+ __u32 mask, void *data, int data_type);
+ int (*handle_event)(struct fsnotify_group *group, struct fsnotify_mark *mark,
+ struct fsnotify_event *event);
void (*free_group_priv)(struct fsnotify_group *group);
void (*freeing_mark)(struct fsnotify_mark *mark, struct fsnotify_group *group);
void (*free_event_priv)(struct fsnotify_event_private_data *priv);
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index cfb97d752a618..584b94360217f 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -903,7 +903,9 @@ static void evict_chunk(struct audit_chunk *chunk)
mutex_unlock(&audit_filter_mutex);
}
-static int audit_tree_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+static int audit_tree_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *mark,
+ struct fsnotify_event *event)
{
BUG();
return -EOPNOTSUPP;
@@ -918,8 +920,8 @@ static void audit_tree_freeing_mark(struct fsnotify_mark *entry, struct fsnotify
}
static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, __u32 mask, void *data,
- int data_type)
+ struct vfsmount *mnt, struct fsnotify_mark *mark,
+ __u32 mask, void *data, int data_type)
{
return 0;
}
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index b955a22d8ff19..4d5ea0319a6cb 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -511,8 +511,8 @@ void audit_remove_watch_rule(struct audit_krule *krule)
}
static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, __u32 mask, void *data,
- int data_type)
+ struct vfsmount *mnt, struct fsnotify_mark *mark,
+ __u32 mask, void *data, int data_type)
{
struct fsnotify_mark *entry;
bool send;
@@ -531,7 +531,9 @@ static bool audit_watch_should_send_event(struct fsnotify_group *group, struct i
}
/* Update watch data in audit rules based on fsnotify events. */
-static int audit_watch_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+static int audit_watch_handle_event(struct fsnotify_group *group,
+ struct fsnotify_mark *mark,
+ struct fsnotify_event *event)
{
struct inode *inode;
__u32 mask = event->mask;
--
GitLab
From 7f6b6117e1803777fcf48fe31bd236a7fbf740db Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 165/863] inotify: use the mark in handler functions
inotify now gets a mark in the should_send_event and handle_event
functions. Rather than look up the mark themselves inotify should just use
the mark it was handed.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/inotify/inotify_fsnotify.c | 29 +++++-----------------------
1 file changed, 5 insertions(+), 24 deletions(-)
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index dbd76bbb3e219..aa3f93c03e0f3 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -93,7 +93,6 @@ static int inotify_handle_event(struct fsnotify_group *group,
struct fsnotify_mark *mark,
struct fsnotify_event *event)
{
- struct fsnotify_mark *fsn_mark;
struct inotify_inode_mark *i_mark;
struct inode *to_tell;
struct inotify_event_private_data *event_priv;
@@ -106,11 +105,7 @@ static int inotify_handle_event(struct fsnotify_group *group,
to_tell = event->to_tell;
- fsn_mark = fsnotify_find_inode_mark(group, to_tell);
- /* race with watch removal? We already passes should_send */
- if (unlikely(!fsn_mark))
- return 0;
- i_mark = container_of(fsn_mark, struct inotify_inode_mark,
+ i_mark = container_of(mark, struct inotify_inode_mark,
fsn_mark);
wd = i_mark->wd;
@@ -132,14 +127,8 @@ static int inotify_handle_event(struct fsnotify_group *group,
ret = PTR_ERR(added_event);
}
- if (fsn_mark->mask & IN_ONESHOT)
- fsnotify_destroy_mark(fsn_mark);
-
- /*
- * If we hold the fsn_mark until after the event is on the queue
- * IN_IGNORED won't be able to pass this event in the queue
- */
- fsnotify_put_mark(fsn_mark);
+ if (mark->mask & IN_ONESHOT)
+ fsnotify_destroy_mark(mark);
return ret;
}
@@ -153,20 +142,15 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
struct vfsmount *mnt, struct fsnotify_mark *mark,
__u32 mask, void *data, int data_type)
{
- struct fsnotify_mark *fsn_mark;
bool send;
pr_debug("%s: group=%p inode=%p mask=%x data=%p data_type=%d\n",
__func__, group, inode, mask, data, data_type);
- fsn_mark = fsnotify_find_inode_mark(group, inode);
- if (!fsn_mark)
- return false;
-
mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (fsn_mark->mask & mask);
+ send = (mark->mask & mask);
- if (send && (fsn_mark->mask & FS_EXCL_UNLINK) &&
+ if (send && (mark->mask & FS_EXCL_UNLINK) &&
(data_type == FSNOTIFY_EVENT_FILE)) {
struct file *file = data;
@@ -174,9 +158,6 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
send = false;
}
- /* find took a reference */
- fsnotify_put_mark(fsn_mark);
-
return send;
}
--
GitLab
From c496313fcc35a41e176e3f19cdda2544ea3a32a6 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 166/863] dnotify: use the mark in handler functions
dnotify now gets a mark in the should_send_event and handle_event
functions. Rather than look up the mark themselves dnotify should just use
the mark it was handed.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 22 +++++-----------------
1 file changed, 5 insertions(+), 17 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index 2cae9be120db2..e3e855ff0dd85 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -86,7 +86,6 @@ static int dnotify_handle_event(struct fsnotify_group *group,
struct fsnotify_mark *mark,
struct fsnotify_event *event)
{
- struct fsnotify_mark *fsn_mark = NULL;
struct dnotify_mark *dn_mark;
struct inode *to_tell;
struct dnotify_struct *dn;
@@ -96,12 +95,9 @@ static int dnotify_handle_event(struct fsnotify_group *group,
to_tell = event->to_tell;
- fsn_mark = fsnotify_find_inode_mark(group, to_tell);
- if (unlikely(!fsn_mark))
- return 0;
- dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark);
+ dn_mark = container_of(mark, struct dnotify_mark, fsn_mark);
- spin_lock(&fsn_mark->lock);
+ spin_lock(&mark->lock);
prev = &dn_mark->dn;
while ((dn = *prev) != NULL) {
if ((dn->dn_mask & test_mask) == 0) {
@@ -115,12 +111,11 @@ static int dnotify_handle_event(struct fsnotify_group *group,
else {
*prev = dn->dn_next;
kmem_cache_free(dnotify_struct_cache, dn);
- dnotify_recalc_inode_mask(fsn_mark);
+ dnotify_recalc_inode_mask(mark);
}
}
- spin_unlock(&fsn_mark->lock);
- fsnotify_put_mark(fsn_mark);
+ spin_unlock(&mark->lock);
return 0;
}
@@ -134,7 +129,6 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
struct fsnotify_mark *mark, __u32 mask,
void *data, int data_type)
{
- struct fsnotify_mark *fsn_mark;
bool send;
/* !dir_notify_enable should never get here, don't waste time checking
@@ -145,14 +139,8 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
if (!S_ISDIR(inode->i_mode))
return false;
- fsn_mark = fsnotify_find_inode_mark(group, inode);
- if (!fsn_mark)
- return false;
-
mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (mask & fsn_mark->mask);
-
- fsnotify_put_mark(fsn_mark); /* matches fsnotify_find_inode_mark */
+ send = (mask & mark->mask);
return send;
}
--
GitLab
From 4cd76a47924cd966799402d0f2bba356cde5c1b3 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 167/863] audit: use the mark in handler functions
audit now gets a mark in the should_send_event and handle_event
functions. Rather than look up the mark themselves audit should just use
the mark it was handed.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
kernel/audit_watch.c | 20 +++-----------------
1 file changed, 3 insertions(+), 17 deletions(-)
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 4d5ea0319a6cb..9173bcf33763a 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -514,18 +514,10 @@ static bool audit_watch_should_send_event(struct fsnotify_group *group, struct i
struct vfsmount *mnt, struct fsnotify_mark *mark,
__u32 mask, void *data, int data_type)
{
- struct fsnotify_mark *entry;
bool send;
- entry = fsnotify_find_inode_mark(group, inode);
- if (!entry)
- return false;
-
mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (entry->mask & mask);
-
- /* find took a reference */
- fsnotify_put_mark(entry);
+ send = (mark->mask & mask);
return send;
}
@@ -540,11 +532,9 @@ static int audit_watch_handle_event(struct fsnotify_group *group,
const char *dname = event->file_name;
struct audit_parent *parent;
- BUG_ON(group != audit_watch_group);
+ parent = container_of(mark, struct audit_parent, mark);
- parent = audit_find_parent(event->to_tell);
- if (unlikely(!parent))
- return 0;
+ BUG_ON(group != audit_watch_group);
switch (event->data_type) {
case (FSNOTIFY_EVENT_FILE):
@@ -565,10 +555,6 @@ static int audit_watch_handle_event(struct fsnotify_group *group,
audit_update_watch(parent, dname, (dev_t)-1, (unsigned long)-1, 1);
else if (mask & (FS_DELETE_SELF|FS_UNMOUNT|FS_MOVE_SELF))
audit_remove_parent_watches(parent);
- /* moved put_inotify_watch to freeing mark */
-
- /* matched the ref taken by audit_find_parent */
- audit_put_parent(parent);
return 0;
}
--
GitLab
From 0215054f377ce5ac4ffc27b26b13b3f10e6410e6 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:38 -0400
Subject: [PATCH 168/863] fanotify: use the mark in handler functions
fanotify now gets a mark in the should_send_event and handle_event
functions. Rather than look up the mark themselves fanotify should just use
the mark it was handed.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fanotify/fanotify.c | 46 +++++++++++++----------------------
1 file changed, 17 insertions(+), 29 deletions(-)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index abfba45abe2c3..666ccb733066e 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -152,18 +152,16 @@ static int fanotify_handle_event(struct fsnotify_group *group,
return ret;
}
-static bool should_send_vfsmount_event(struct fsnotify_group *group, struct vfsmount *mnt,
- struct inode *inode, __u32 mask)
+static bool should_send_vfsmount_event(struct fsnotify_group *group,
+ struct vfsmount *mnt,
+ struct inode *inode,
+ struct fsnotify_mark *mnt_mark,
+ __u32 mask)
{
- struct fsnotify_mark *mnt_mark;
struct fsnotify_mark *inode_mark;
- pr_debug("%s: group=%p vfsmount=%p mask=%x\n",
- __func__, group, mnt, mask);
-
- mnt_mark = fsnotify_find_vfsmount_mark(group, mnt);
- if (!mnt_mark)
- return false;
+ pr_debug("%s: group=%p vfsmount=%p mark=%p mask=%x\n",
+ __func__, group, mnt, mnt_mark, mask);
mask &= mnt_mark->mask;
mask &= ~mnt_mark->ignored_mask;
@@ -176,28 +174,21 @@ static bool should_send_vfsmount_event(struct fsnotify_group *group, struct vfsm
}
}
- /* find took a reference */
- fsnotify_put_mark(mnt_mark);
-
return mask;
}
-static bool should_send_inode_event(struct fsnotify_group *group, struct inode *inode,
+static bool should_send_inode_event(struct fsnotify_group *group,
+ struct inode *inode,
+ struct fsnotify_mark *mark,
__u32 mask)
{
- struct fsnotify_mark *fsn_mark;
-
- pr_debug("%s: group=%p inode=%p mask=%x\n",
- __func__, group, inode, mask);
-
- fsn_mark = fsnotify_find_inode_mark(group, inode);
- if (!fsn_mark)
- return false;
+ pr_debug("%s: group=%p inode=%p mark=%p mask=%x\n",
+ __func__, group, inode, mark, mask);
/* if the event is for a child and this inode doesn't care about
* events on the child, don't send it! */
if ((mask & FS_EVENT_ON_CHILD) &&
- !(fsn_mark->mask & FS_EVENT_ON_CHILD)) {
+ !(mark->mask & FS_EVENT_ON_CHILD)) {
mask = 0;
} else {
/*
@@ -205,13 +196,10 @@ static bool should_send_inode_event(struct fsnotify_group *group, struct inode *
* type of event?
*/
mask &= ~FS_EVENT_ON_CHILD;
- mask &= fsn_mark->mask;
- mask &= ~fsn_mark->ignored_mask;
+ mask &= mark->mask;
+ mask &= ~mark->ignored_mask;
}
- /* find took a reference */
- fsnotify_put_mark(fsn_mark);
-
return mask;
}
@@ -232,9 +220,9 @@ static bool fanotify_should_send_event(struct fsnotify_group *group, struct inod
return false;
if (mnt)
- return should_send_vfsmount_event(group, mnt, to_tell, mask);
+ return should_send_vfsmount_event(group, mnt, to_tell, mark, mask);
else
- return should_send_inode_event(group, to_tell, mask);
+ return should_send_inode_event(group, to_tell, mark, mask);
}
const struct fsnotify_ops fanotify_fsnotify_ops = {
--
GitLab
From 2612abb51b11ffd2d75c472b11178115f5808909 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:39 -0400
Subject: [PATCH 169/863] fsnotify: cleanup should_send_event
The change to use srcu and walk the object list rather than the global
fsnotify_group list means that should_send_event is no longer needed for a
number of groups and can be simplified for others. Do that.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 11 +----------
fs/notify/fanotify/fanotify.c | 23 ++++++++---------------
fs/notify/fsnotify.c | 4 ++--
fs/notify/inotify/inotify_fsnotify.c | 14 +++-----------
kernel/audit_tree.c | 2 +-
kernel/audit_watch.c | 7 +------
6 files changed, 16 insertions(+), 45 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index e3e855ff0dd85..c3dc15879a520 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -129,20 +129,11 @@ static bool dnotify_should_send_event(struct fsnotify_group *group,
struct fsnotify_mark *mark, __u32 mask,
void *data, int data_type)
{
- bool send;
-
- /* !dir_notify_enable should never get here, don't waste time checking
- if (!dir_notify_enable)
- return 0; */
-
/* not a dir, dnotify doesn't care */
if (!S_ISDIR(inode->i_mode))
return false;
- mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (mask & mark->mask);
-
- return send;
+ return true;
}
static void dnotify_free_mark(struct fsnotify_mark *fsn_mark)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index 666ccb733066e..fbd7f35c6134b 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -185,22 +185,15 @@ static bool should_send_inode_event(struct fsnotify_group *group,
pr_debug("%s: group=%p inode=%p mark=%p mask=%x\n",
__func__, group, inode, mark, mask);
- /* if the event is for a child and this inode doesn't care about
- * events on the child, don't send it! */
+ /*
+ * if the event is for a child and this inode doesn't care about
+ * events on the child, don't send it!
+ */
if ((mask & FS_EVENT_ON_CHILD) &&
- !(mark->mask & FS_EVENT_ON_CHILD)) {
- mask = 0;
- } else {
- /*
- * We care about children, but do we care about this particular
- * type of event?
- */
- mask &= ~FS_EVENT_ON_CHILD;
- mask &= mark->mask;
- mask &= ~mark->ignored_mask;
- }
-
- return mask;
+ !(mark->mask & FS_EVENT_ON_CHILD))
+ return false;
+ else
+ return true;
}
static bool fanotify_should_send_event(struct fsnotify_group *group, struct inode *to_tell,
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 59d639996cad6..53b31f46d698c 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -180,8 +180,8 @@ static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
" data_is=%d cookie=%d event=%p\n", __func__, group, to_tell,
mnt, mark, mask, data, data_is, cookie, *event);
- if (!group->ops->should_send_event(group, to_tell, mnt, mark, mask,
- data, data_is))
+ if (group->ops->should_send_event(group, to_tell, mnt, mark, mask,
+ data, data_is) == false)
return 0;
if (!*event) {
*event = fsnotify_create_event(to_tell, mask, data,
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index aa3f93c03e0f3..7cf518b25daac 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -142,23 +142,15 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
struct vfsmount *mnt, struct fsnotify_mark *mark,
__u32 mask, void *data, int data_type)
{
- bool send;
-
- pr_debug("%s: group=%p inode=%p mask=%x data=%p data_type=%d\n",
- __func__, group, inode, mask, data, data_type);
-
- mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (mark->mask & mask);
-
- if (send && (mark->mask & FS_EXCL_UNLINK) &&
+ if ((mark->mask & FS_EXCL_UNLINK) &&
(data_type == FSNOTIFY_EVENT_FILE)) {
struct file *file = data;
if (d_unlinked(file->f_path.dentry))
- send = false;
+ return false;
}
- return send;
+ return true;
}
/*
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 584b94360217f..2abb99f3459d1 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -923,7 +923,7 @@ static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *in
struct vfsmount *mnt, struct fsnotify_mark *mark,
__u32 mask, void *data, int data_type)
{
- return 0;
+ return false;
}
static const struct fsnotify_ops audit_tree_ops = {
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 9173bcf33763a..097a61c65fe0e 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -514,12 +514,7 @@ static bool audit_watch_should_send_event(struct fsnotify_group *group, struct i
struct vfsmount *mnt, struct fsnotify_mark *mark,
__u32 mask, void *data, int data_type)
{
- bool send;
-
- mask = (mask & ~FS_EVENT_ON_CHILD);
- send = (mark->mask & mask);
-
- return send;
+ return true;
}
/* Update watch data in audit rules based on fsnotify events. */
--
GitLab
From 03930979afa63e079e9aefd4d3dd429240711027 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:39 -0400
Subject: [PATCH 170/863] fsnotify: remove the global masks
Because we walk the object->fsnotify_marks list instead of the global
fsnotify groups list we don't need the fsnotify_inode_mask and
fsnotify_vfsmount_mask as these were simply shortcuts in fsnotify() for
performance. They are now extra checks, rip them out.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 5 ----
fs/notify/fsnotify.h | 4 ----
fs/notify/group.c | 39 ++------------------------------
include/linux/fsnotify_backend.h | 2 --
4 files changed, 2 insertions(+), 48 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 53b31f46d698c..9ba29ee747cf2 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -227,11 +227,6 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
if (mask & FS_MODIFY)
__fsnotify_flush_ignored_mask(to_tell, data, data_is);
- /* if none of the directed listeners or vfsmount listeners care */
- if (!(test_mask & fsnotify_inode_mask) &&
- !(test_mask & fsnotify_vfsmount_mask))
- return 0;
-
if (data_is == FSNOTIFY_EVENT_FILE)
mnt = ((struct file *)data)->f_path.mnt;
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index 7eed86f942ba2..b41dbf5a125c3 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -10,10 +10,6 @@
extern struct list_head fsnotify_inode_groups;
/* all groups which receive vfsmount fsnotify events */
extern struct list_head fsnotify_vfsmount_groups;
-/* all bitwise OR of all event types (FS_*) for all fsnotify_inode_groups */
-extern __u32 fsnotify_inode_mask;
-/* all bitwise OR of all event types (FS_*) for all fsnotify_vfsmount_groups */
-extern __u32 fsnotify_vfsmount_mask;
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 48d3a6d6e47ae..8da532dd60263 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -34,54 +34,21 @@ static DEFINE_MUTEX(fsnotify_grp_mutex);
LIST_HEAD(fsnotify_inode_groups);
/* all groups registered to receive mount point filesystem notifications */
LIST_HEAD(fsnotify_vfsmount_groups);
-/* bitwise OR of all events (FS_*) interesting to some group on this system */
-__u32 fsnotify_inode_mask;
-/* bitwise OR of all events (FS_*) interesting to some group on this system */
-__u32 fsnotify_vfsmount_mask;
-
-/*
- * When a new group registers or changes it's set of interesting events
- * this function updates the fsnotify_mask to contain all interesting events
- */
-void fsnotify_recalc_global_mask(void)
-{
- struct fsnotify_group *group;
- __u32 inode_mask = 0;
- __u32 vfsmount_mask = 0;
-
- mutex_lock(&fsnotify_grp_mutex);
- list_for_each_entry_rcu(group, &fsnotify_inode_groups, inode_group_list)
- inode_mask |= group->mask;
- list_for_each_entry_rcu(group, &fsnotify_vfsmount_groups, vfsmount_group_list)
- vfsmount_mask |= group->mask;
-
- fsnotify_inode_mask = inode_mask;
- fsnotify_vfsmount_mask = vfsmount_mask;
-
- mutex_unlock(&fsnotify_grp_mutex);
-}
/*
* Update the group->mask by running all of the marks associated with this
- * group and finding the bitwise | of all of the mark->mask. If we change
- * the group->mask we need to update the global mask of events interesting
- * to the system.
+ * group and finding the bitwise | of all of the mark->mask.
*/
void fsnotify_recalc_group_mask(struct fsnotify_group *group)
{
__u32 mask = 0;
- __u32 old_mask = group->mask;
struct fsnotify_mark *mark;
spin_lock(&group->mark_lock);
list_for_each_entry(mark, &group->marks_list, g_list)
mask |= mark->mask;
- spin_unlock(&group->mark_lock);
-
group->mask = mask;
-
- if (old_mask != mask)
- fsnotify_recalc_global_mask();
+ spin_unlock(&group->mark_lock);
}
void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
@@ -217,8 +184,6 @@ void fsnotify_put_group(struct fsnotify_group *group)
mutex_unlock(&fsnotify_grp_mutex);
- /* and now it is really dead. _Nothing_ could be seeing it */
- fsnotify_recalc_global_mask();
fsnotify_destroy_group(group);
}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 225dc0c3a48cc..07d3c89547215 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -365,8 +365,6 @@ static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode
/* called from fsnotify listeners, such as fanotify or dnotify */
-/* must call when a group changes its ->mask */
-extern void fsnotify_recalc_global_mask(void);
/* get a reference to an existing or create a new group */
extern struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops);
/* run all marks associated with this group and update group->mask */
--
GitLab
From 43709a288ed03aa0e2979ab63dd089b3889645c4 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:39 -0400
Subject: [PATCH 171/863] fsnotify: remove group->mask
group->mask is now useless. It was originally a shortcut for fsnotify to
save on performance. These checks are now redundant, so we remove them.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 4 ----
fs/notify/fanotify/fanotify_user.c | 23 +++++------------------
fs/notify/group.c | 16 ----------------
fs/notify/inotify/inotify_user.c | 9 ---------
include/linux/fsnotify_backend.h | 11 -----------
kernel/audit_watch.c | 8 --------
6 files changed, 5 insertions(+), 66 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index c3dc15879a520..e92b2c87ae944 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -199,8 +199,6 @@ void dnotify_flush(struct file *filp, fl_owner_t id)
if (dn_mark->dn == NULL)
fsnotify_destroy_mark(fsn_mark);
- fsnotify_recalc_group_mask(dnotify_group);
-
mutex_unlock(&dnotify_mark_mutex);
fsnotify_put_mark(fsn_mark);
@@ -385,8 +383,6 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
if (destroy)
fsnotify_destroy_mark(fsn_mark);
- fsnotify_recalc_group_mask(dnotify_group);
-
mutex_unlock(&dnotify_mark_mutex);
fsnotify_put_mark(fsn_mark);
out_err:
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 50cea74bf1c8c..25a3b4dfcf612 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -496,8 +496,6 @@ static int fanotify_remove_vfsmount_mark(struct fsnotify_group *group,
removed = fanotify_mark_remove_from_mask(fsn_mark, mask, flags);
fsnotify_put_mark(fsn_mark);
- if (removed & group->mask)
- fsnotify_recalc_group_mask(group);
if (removed & mnt->mnt_fsnotify_mask)
fsnotify_recalc_vfsmount_mask(mnt);
@@ -518,9 +516,6 @@ static int fanotify_remove_inode_mark(struct fsnotify_group *group,
removed = fanotify_mark_remove_from_mask(fsn_mark, mask, flags);
/* matches the fsnotify_find_inode_mark() */
fsnotify_put_mark(fsn_mark);
-
- if (removed & group->mask)
- fsnotify_recalc_group_mask(group);
if (removed & inode->i_fsnotify_mask)
fsnotify_recalc_inode_mask(inode);
@@ -572,12 +567,9 @@ static int fanotify_add_vfsmount_mark(struct fsnotify_group *group,
}
added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
fsnotify_put_mark(fsn_mark);
- if (added) {
- if (added & ~group->mask)
- fsnotify_recalc_group_mask(group);
- if (added & ~mnt->mnt_fsnotify_mask)
- fsnotify_recalc_vfsmount_mask(mnt);
- }
+ if (added & ~mnt->mnt_fsnotify_mask)
+ fsnotify_recalc_vfsmount_mask(mnt);
+
return 0;
}
@@ -607,12 +599,8 @@ static int fanotify_add_inode_mark(struct fsnotify_group *group,
}
added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
fsnotify_put_mark(fsn_mark);
- if (added) {
- if (added & ~group->mask)
- fsnotify_recalc_group_mask(group);
- if (added & ~inode->i_fsnotify_mask)
- fsnotify_recalc_inode_mask(inode);
- }
+ if (added & ~inode->i_fsnotify_mask)
+ fsnotify_recalc_inode_mask(inode);
return 0;
}
@@ -734,7 +722,6 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
fsnotify_clear_vfsmount_marks_by_group(group);
else
fsnotify_clear_inode_marks_by_group(group);
- fsnotify_recalc_group_mask(group);
break;
default:
ret = -EINVAL;
diff --git a/fs/notify/group.c b/fs/notify/group.c
index 8da532dd60263..fc0d966b270f7 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -35,22 +35,6 @@ LIST_HEAD(fsnotify_inode_groups);
/* all groups registered to receive mount point filesystem notifications */
LIST_HEAD(fsnotify_vfsmount_groups);
-/*
- * Update the group->mask by running all of the marks associated with this
- * group and finding the bitwise | of all of the mark->mask.
- */
-void fsnotify_recalc_group_mask(struct fsnotify_group *group)
-{
- __u32 mask = 0;
- struct fsnotify_mark *mark;
-
- spin_lock(&group->mark_lock);
- list_for_each_entry(mark, &group->marks_list, g_list)
- mask |= mark->mask;
- group->mask = mask;
- spin_unlock(&group->mark_lock);
-}
-
void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
{
struct fsnotify_group *group_iter;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index a4cd227c4c76f..bf7f6d776c31a 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -606,16 +606,11 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
int dropped = (old_mask & ~new_mask);
/* more bits in this fsn_mark than the inode's mask? */
int do_inode = (new_mask & ~inode->i_fsnotify_mask);
- /* more bits in this fsn_mark than the group? */
- int do_group = (new_mask & ~group->mask);
/* update the inode with this new fsn_mark */
if (dropped || do_inode)
fsnotify_recalc_inode_mask(inode);
- /* update the group mask with the new mask */
- if (dropped || do_group)
- fsnotify_recalc_group_mask(group);
}
/* return the wd */
@@ -673,10 +668,6 @@ static int inotify_new_watch(struct fsnotify_group *group,
/* return the watch descriptor for this new mark */
ret = tmp_i_mark->wd;
- /* if this mark added a new event update the group mask */
- if (mask & ~group->mask)
- fsnotify_recalc_group_mask(group);
-
out_err:
/* match the ref from fsnotify_init_mark() */
fsnotify_put_mark(&tmp_i_mark->fsn_mark);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 07d3c89547215..c4e7aab874613 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -119,15 +119,6 @@ struct fsnotify_group {
*/
struct list_head vfsmount_group_list;
- /*
- * Defines all of the event types in which this group is interested.
- * This mask is a bitwise OR of the FS_* events from above. Each time
- * this mask changes for a group (if it changes) the correct functions
- * must be called to update the global structures which indicate global
- * interest in event types.
- */
- __u32 mask;
-
/*
* How the refcnt is used is up to each group. When the refcnt hits 0
* fsnotify will clean up all of the resources associated with this group.
@@ -367,8 +358,6 @@ static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode
/* get a reference to an existing or create a new group */
extern struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops);
-/* run all marks associated with this group and update group->mask */
-extern void fsnotify_recalc_group_mask(struct fsnotify_group *group);
/* drop reference on a group from fsnotify_alloc_group */
extern void fsnotify_put_group(struct fsnotify_group *group);
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 097a61c65fe0e..1b87e757845d2 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -164,8 +164,6 @@ static struct audit_parent *audit_init_parent(struct nameidata *ndp)
return ERR_PTR(ret);
}
- fsnotify_recalc_group_mask(audit_watch_group);
-
return parent;
}
@@ -352,9 +350,6 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
mutex_unlock(&audit_filter_mutex);
fsnotify_destroy_mark(&parent->mark);
-
- fsnotify_recalc_group_mask(audit_watch_group);
-
}
/* Get path information necessary for adding watches. */
@@ -505,9 +500,6 @@ void audit_remove_watch_rule(struct audit_krule *krule)
audit_put_parent(parent);
}
}
-
- fsnotify_recalc_group_mask(audit_watch_group);
-
}
static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
--
GitLab
From 02436668d98385f5b5d9ffb695a37dadf98ed8a8 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:39 -0400
Subject: [PATCH 172/863] fsnotify: remove global fsnotify groups lists
The global fsnotify groups lists were invented as a way to increase the
performance of fsnotify by shortcutting events which were not interesting.
With the changes to walk the object lists rather than global groups lists
these shortcuts are not useful.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 5 --
fs/notify/fsnotify.h | 9 ---
fs/notify/group.c | 107 +------------------------------
fs/notify/mark.c | 9 ---
include/linux/fsnotify_backend.h | 15 -----
5 files changed, 2 insertions(+), 143 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 9ba29ee747cf2..1dd1fde1da089 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -219,11 +219,6 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
/* global tests shouldn't care about events on child only the specific event */
__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
- /* if no fsnotify listeners, nothing to do */
- if (list_empty(&fsnotify_inode_groups) &&
- list_empty(&fsnotify_vfsmount_groups))
- return 0;
-
if (mask & FS_MODIFY)
__fsnotify_flush_ignored_mask(to_tell, data, data_is);
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
index b41dbf5a125c3..85e7d2b431d90 100644
--- a/fs/notify/fsnotify.h
+++ b/fs/notify/fsnotify.h
@@ -6,11 +6,6 @@
#include <linux/srcu.h>
#include <linux/types.h>
-/* all groups which receive inode fsnotify events */
-extern struct list_head fsnotify_inode_groups;
-/* all groups which receive vfsmount fsnotify events */
-extern struct list_head fsnotify_vfsmount_groups;
-
/* destroy all events sitting in this groups notification queue */
extern void fsnotify_flush_notify(struct fsnotify_group *group);
@@ -28,10 +23,6 @@ extern int fsnotify_add_vfsmount_mark(struct fsnotify_mark *mark,
struct fsnotify_group *group, struct vfsmount *mnt,
int allow_dups);
-/* add a group to the inode group list */
-extern void fsnotify_add_inode_group(struct fsnotify_group *group);
-/* add a group to the vfsmount group list */
-extern void fsnotify_add_vfsmount_group(struct fsnotify_group *group);
/* final kfree of a group */
extern void fsnotify_final_destroy_group(struct fsnotify_group *group);
diff --git a/fs/notify/group.c b/fs/notify/group.c
index fc0d966b270f7..d309f38449cbb 100644
--- a/fs/notify/group.c
+++ b/fs/notify/group.c
@@ -28,67 +28,6 @@
#include <asm/atomic.h>
-/* protects writes to fsnotify_groups and fsnotify_mask */
-static DEFINE_MUTEX(fsnotify_grp_mutex);
-/* all groups registered to receive inode filesystem notifications */
-LIST_HEAD(fsnotify_inode_groups);
-/* all groups registered to receive mount point filesystem notifications */
-LIST_HEAD(fsnotify_vfsmount_groups);
-
-void fsnotify_add_vfsmount_group(struct fsnotify_group *group)
-{
- struct fsnotify_group *group_iter;
-
- mutex_lock(&fsnotify_grp_mutex);
-
- if (!group->on_vfsmount_group_list) {
- list_for_each_entry(group_iter, &fsnotify_vfsmount_groups,
- vfsmount_group_list) {
- /* insert in front of this one? */
- if (group < group_iter) {
- /* list_add_tail() insert in front of group_iter */
- list_add_tail_rcu(&group->inode_group_list,
- &group_iter->inode_group_list);
- goto out;
- }
- }
-
- /* apparently we need to be the last entry */
- list_add_tail_rcu(&group->vfsmount_group_list, &fsnotify_vfsmount_groups);
- }
-out:
- group->on_vfsmount_group_list = 1;
-
- mutex_unlock(&fsnotify_grp_mutex);
-}
-
-void fsnotify_add_inode_group(struct fsnotify_group *group)
-{
- struct fsnotify_group *group_iter;
-
- mutex_lock(&fsnotify_grp_mutex);
-
- /* add to global group list */
- if (!group->on_inode_group_list) {
- list_for_each_entry(group_iter, &fsnotify_inode_groups,
- inode_group_list) {
- if (group < group_iter) {
- /* list_add_tail() insert in front of group_iter */
- list_add_tail_rcu(&group->inode_group_list,
- &group_iter->inode_group_list);
- goto out;
- }
- }
-
- /* apparently we need to be the last entry */
- list_add_tail_rcu(&group->inode_group_list, &fsnotify_inode_groups);
- }
-out:
- group->on_inode_group_list = 1;
-
- mutex_unlock(&fsnotify_grp_mutex);
-}
-
/*
* Final freeing of a group
*/
@@ -123,52 +62,13 @@ static void fsnotify_destroy_group(struct fsnotify_group *group)
fsnotify_final_destroy_group(group);
}
-/*
- * Remove this group from the global list of groups that will get events
- * this can be done even if there are still references and things still using
- * this group. This just stops the group from getting new events.
- */
-static void __fsnotify_evict_group(struct fsnotify_group *group)
-{
- BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
-
- if (group->on_inode_group_list)
- list_del_rcu(&group->inode_group_list);
- group->on_inode_group_list = 0;
- if (group->on_vfsmount_group_list)
- list_del_rcu(&group->vfsmount_group_list);
- group->on_vfsmount_group_list = 0;
-}
-
-/*
- * Called when a group is no longer interested in getting events. This can be
- * used if a group is misbehaving or if for some reason a group should no longer
- * get any filesystem events.
- */
-void fsnotify_evict_group(struct fsnotify_group *group)
-{
- mutex_lock(&fsnotify_grp_mutex);
- __fsnotify_evict_group(group);
- mutex_unlock(&fsnotify_grp_mutex);
-}
-
/*
* Drop a reference to a group. Free it if it's through.
*/
void fsnotify_put_group(struct fsnotify_group *group)
{
- if (!atomic_dec_and_mutex_lock(&group->refcnt, &fsnotify_grp_mutex))
- return;
-
- /*
- * OK, now we know that there's no other users *and* we hold mutex,
- * so no new references will appear
- */
- __fsnotify_evict_group(group);
-
- mutex_unlock(&fsnotify_grp_mutex);
-
- fsnotify_destroy_group(group);
+ if (atomic_dec_and_test(&group->refcnt))
+ fsnotify_destroy_group(group);
}
/*
@@ -195,9 +95,6 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
init_waitqueue_head(&group->notification_waitq);
group->max_events = UINT_MAX;
- INIT_LIST_HEAD(&group->inode_group_list);
- INIT_LIST_HEAD(&group->vfsmount_group_list);
-
spin_lock_init(&group->mark_lock);
INIT_LIST_HEAD(&group->marks_list);
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 236f29b066ed0..325185e514bbd 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -222,15 +222,6 @@ int fsnotify_add_mark(struct fsnotify_mark *mark,
BUG_ON(inode && mnt);
BUG_ON(!inode && !mnt);
- /*
- * if this group isn't being testing for inode type events we need
- * to start testing
- */
- if (inode && unlikely(list_empty(&group->inode_group_list)))
- fsnotify_add_inode_group(group);
- else if (mnt && unlikely(list_empty(&group->vfsmount_group_list)))
- fsnotify_add_vfsmount_group(group);
-
/*
* LOCKING ORDER!!!!
* mark->lock
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index c4e7aab874613..2e7cc8c2a1511 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -108,17 +108,6 @@ struct fsnotify_ops {
* everything will be cleaned up.
*/
struct fsnotify_group {
- /*
- * global list of all groups receiving events from fsnotify.
- * anchored by fsnotify_inode_groups and protected by either fsnotify_grp_mutex
- * or fsnotify_grp_srcu depending on write vs read.
- */
- struct list_head inode_group_list;
- /*
- * same as above except anchored by fsnotify_vfsmount_groups
- */
- struct list_head vfsmount_group_list;
-
/*
* How the refcnt is used is up to each group. When the refcnt hits 0
* fsnotify will clean up all of the resources associated with this group.
@@ -145,10 +134,6 @@ struct fsnotify_group {
* a group */
struct list_head marks_list; /* all inode marks for this group */
- /* prevents double list_del of group_list. protected by global fsnotify_grp_mutex */
- bool on_inode_group_list;
- bool on_vfsmount_group_list;
-
/* groups can define private fields here or use the void *private */
union {
void *private;
--
GitLab
From 84a5b68e8da1490906c11129756490a556ae2c19 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:39 -0400
Subject: [PATCH 173/863] fsnotify: rework ignored mark flushing
currently ignored_mark clearing is done in a seperate list traversal
before the actual list traversal to send events. There is no need for
this. Do them at the same time.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 60 ++++++++------------------------------------
1 file changed, 11 insertions(+), 49 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 1dd1fde1da089..0bb4aeb8e00fd 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -140,36 +140,6 @@ void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
}
EXPORT_SYMBOL_GPL(__fsnotify_parent);
-void __fsnotify_flush_ignored_mask(struct inode *inode, void *data, int data_is)
-{
- struct fsnotify_mark *mark;
- struct hlist_node *node;
- int idx;
-
- idx = srcu_read_lock(&fsnotify_mark_srcu);
-
- if (!hlist_empty(&inode->i_fsnotify_marks)) {
- hlist_for_each_entry_rcu(mark, node, &inode->i_fsnotify_marks, i.i_list) {
- if (!(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
- mark->ignored_mask = 0;
- }
- }
-
- if (data_is == FSNOTIFY_EVENT_FILE) {
- struct vfsmount *mnt;
-
- mnt = ((struct file *)data)->f_path.mnt;
- if (mnt && !hlist_empty(&mnt->mnt_fsnotify_marks)) {
- hlist_for_each_entry_rcu(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
- if (!(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
- mark->ignored_mask = 0;
- }
- }
- }
-
- srcu_read_unlock(&fsnotify_mark_srcu, idx);
-}
-
static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
struct vfsmount *mnt, struct fsnotify_mark *mark,
__u32 mask, void *data, int data_is, u32 cookie,
@@ -193,14 +163,6 @@ static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
return group->ops->handle_event(group, mark, *event);
}
-static bool needed_by_vfsmount(__u32 test_mask, struct vfsmount *mnt)
-{
- if (!mnt)
- return false;
-
- return (test_mask & mnt->mnt_fsnotify_mask);
-}
-
/*
* This is the main call to fsnotify. The VFS calls into hook specific functions
* in linux/fsnotify.h. Those functions then in turn call here. Here will call
@@ -219,26 +181,21 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
/* global tests shouldn't care about events on child only the specific event */
__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
- if (mask & FS_MODIFY)
- __fsnotify_flush_ignored_mask(to_tell, data, data_is);
-
if (data_is == FSNOTIFY_EVENT_FILE)
mnt = ((struct file *)data)->f_path.mnt;
- /* if this inode's directed listeners don't care and nothing on the vfsmount
- * listeners list cares, nothing to do */
- if (!(test_mask & to_tell->i_fsnotify_mask) &&
- !needed_by_vfsmount(test_mask, mnt))
- return 0;
-
idx = srcu_read_lock(&fsnotify_mark_srcu);
- if (test_mask & to_tell->i_fsnotify_mask) {
+ if ((test_mask & to_tell->i_fsnotify_mask) || (mask & FS_MODIFY)) {
hlist_for_each_entry_rcu(mark, node, &to_tell->i_fsnotify_marks, i.i_list) {
pr_debug("%s: inode_loop: mark=%p mark->mask=%x mark->ignored_mask=%x\n",
__func__, mark, mark->mask, mark->ignored_mask);
+ if ((mask & FS_MODIFY) &&
+ !(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ mark->ignored_mask = 0;
+
if (test_mask & mark->mask & ~mark->ignored_mask) {
group = mark->group;
if (!group)
@@ -252,12 +209,17 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
}
}
- if (mnt && (test_mask & mnt->mnt_fsnotify_mask)) {
+ if (mnt && ((test_mask & mnt->mnt_fsnotify_mask) ||
+ (mask & FS_MODIFY))) {
hlist_for_each_entry_rcu(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
pr_debug("%s: mnt_loop: mark=%p mark->mask=%x mark->ignored_mask=%x\n",
__func__, mark, mark->mask, mark->ignored_mask);
+ if ((mask & FS_MODIFY) &&
+ !(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ mark->ignored_mask = 0;
+
if (test_mask & mark->mask & ~mark->ignored_mask) {
group = mark->group;
if (!group)
--
GitLab
From 613a807fe7c793ceb7d6f059773527a5a6c84a96 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:39 -0400
Subject: [PATCH 174/863] fsnotify: walk the inode and vfsmount lists
simultaneously
We currently walk the list of marks on an inode followed by the list of
marks on the vfsmount. These are in order (by the memory address of the
group) so lets walk them both together. Eventually we can pass both the
inode mark and the vfsmount mark to helpers simultaneously.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/fsnotify.c | 134 +++++++++++++++++++++++++++----------------
1 file changed, 84 insertions(+), 50 deletions(-)
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 0bb4aeb8e00fd..cdaa51cb698cf 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -140,19 +140,31 @@ void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
}
EXPORT_SYMBOL_GPL(__fsnotify_parent);
-static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
- struct vfsmount *mnt, struct fsnotify_mark *mark,
- __u32 mask, void *data, int data_is, u32 cookie,
+static int send_to_group(struct inode *to_tell, struct vfsmount *mnt,
+ struct fsnotify_mark *mark,
+ __u32 mask, void *data,
+ int data_is, u32 cookie,
const unsigned char *file_name,
struct fsnotify_event **event)
{
+ struct fsnotify_group *group = mark->group;
+ __u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
+
pr_debug("%s: group=%p to_tell=%p mnt=%p mark=%p mask=%x data=%p"
" data_is=%d cookie=%d event=%p\n", __func__, group, to_tell,
mnt, mark, mask, data, data_is, cookie, *event);
+ if ((mask & FS_MODIFY) &&
+ !(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ mark->ignored_mask = 0;
+
+ if (!(test_mask & mark->mask & ~mark->ignored_mask))
+ return 0;
+
if (group->ops->should_send_event(group, to_tell, mnt, mark, mask,
data, data_is) == false)
return 0;
+
if (!*event) {
*event = fsnotify_create_event(to_tell, mask, data,
data_is, file_name,
@@ -172,67 +184,89 @@ static int send_to_group(struct fsnotify_group *group, struct inode *to_tell,
int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
const unsigned char *file_name, u32 cookie)
{
- struct fsnotify_mark *mark;
- struct fsnotify_group *group;
+ struct hlist_node *inode_node, *vfsmount_node;
+ struct fsnotify_mark *inode_mark = NULL, *vfsmount_mark = NULL;
+ struct fsnotify_group *inode_group, *vfsmount_group;
struct fsnotify_event *event = NULL;
- struct hlist_node *node;
- struct vfsmount *mnt = NULL;
+ struct vfsmount *mnt;
int idx, ret = 0;
+ bool used_inode = false, used_vfsmount = false;
/* global tests shouldn't care about events on child only the specific event */
__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
if (data_is == FSNOTIFY_EVENT_FILE)
mnt = ((struct file *)data)->f_path.mnt;
+ else
+ mnt = NULL;
+
+ /*
+ * if this is a modify event we may need to clear the ignored masks
+ * otherwise return if neither the inode nor the vfsmount care about
+ * this type of event.
+ */
+ if (!(mask & FS_MODIFY) &&
+ !(test_mask & to_tell->i_fsnotify_mask) &&
+ !(mnt && test_mask & mnt->mnt_fsnotify_mask))
+ return 0;
idx = srcu_read_lock(&fsnotify_mark_srcu);
- if ((test_mask & to_tell->i_fsnotify_mask) || (mask & FS_MODIFY)) {
- hlist_for_each_entry_rcu(mark, node, &to_tell->i_fsnotify_marks, i.i_list) {
-
- pr_debug("%s: inode_loop: mark=%p mark->mask=%x mark->ignored_mask=%x\n",
- __func__, mark, mark->mask, mark->ignored_mask);
-
- if ((mask & FS_MODIFY) &&
- !(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
- mark->ignored_mask = 0;
-
- if (test_mask & mark->mask & ~mark->ignored_mask) {
- group = mark->group;
- if (!group)
- continue;
- ret = send_to_group(group, to_tell, NULL, mark, mask,
- data, data_is, cookie, file_name,
- &event);
- if (ret)
- goto out;
- }
- }
+ if ((mask & FS_MODIFY) ||
+ (test_mask & to_tell->i_fsnotify_mask))
+ inode_node = to_tell->i_fsnotify_marks.first;
+ else
+ inode_node = NULL;
+
+ if (mnt) {
+ if ((mask & FS_MODIFY) ||
+ (test_mask & mnt->mnt_fsnotify_mask))
+ vfsmount_node = mnt->mnt_fsnotify_marks.first;
+ else
+ vfsmount_node = NULL;
+ } else {
+ mnt = NULL;
+ vfsmount_node = NULL;
}
- if (mnt && ((test_mask & mnt->mnt_fsnotify_mask) ||
- (mask & FS_MODIFY))) {
- hlist_for_each_entry_rcu(mark, node, &mnt->mnt_fsnotify_marks, m.m_list) {
-
- pr_debug("%s: mnt_loop: mark=%p mark->mask=%x mark->ignored_mask=%x\n",
- __func__, mark, mark->mask, mark->ignored_mask);
-
- if ((mask & FS_MODIFY) &&
- !(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
- mark->ignored_mask = 0;
-
- if (test_mask & mark->mask & ~mark->ignored_mask) {
- group = mark->group;
- if (!group)
- continue;
- ret = send_to_group(group, to_tell, mnt, mark, mask,
- data, data_is, cookie, file_name,
- &event);
- if (ret)
- goto out;
- }
+ while (inode_node || vfsmount_node) {
+ if (inode_node) {
+ inode_mark = hlist_entry(srcu_dereference(inode_node, &fsnotify_mark_srcu),
+ struct fsnotify_mark, i.i_list);
+ inode_group = inode_mark->group;
+ } else
+ inode_group = (void *)-1;
+
+ if (vfsmount_node) {
+ vfsmount_mark = hlist_entry(srcu_dereference(vfsmount_node, &fsnotify_mark_srcu),
+ struct fsnotify_mark, m.m_list);
+ vfsmount_group = vfsmount_mark->group;
+ } else
+ vfsmount_group = (void *)-1;
+
+ if (inode_group < vfsmount_group) {
+ /* handle inode */
+ send_to_group(to_tell, NULL, inode_mark, mask, data,
+ data_is, cookie, file_name, &event);
+ used_inode = true;
+ } else if (vfsmount_group < inode_group) {
+ send_to_group(to_tell, mnt, vfsmount_mark, mask, data,
+ data_is, cookie, file_name, &event);
+ used_vfsmount = true;
+ } else {
+ send_to_group(to_tell, mnt, vfsmount_mark, mask, data,
+ data_is, cookie, file_name, &event);
+ used_vfsmount = true;
+ send_to_group(to_tell, NULL, inode_mark, mask, data,
+ data_is, cookie, file_name, &event);
+ used_inode = true;
}
+
+ if (used_inode)
+ inode_node = inode_node->next;
+ if (used_vfsmount)
+ vfsmount_node = vfsmount_node->next;
}
-out:
+
srcu_read_unlock(&fsnotify_mark_srcu, idx);
/*
* fsnotify_create_event() took a reference so the event can't be cleaned
--
GitLab
From ce8f76fb7320297ccbe7c950fd9a2d727dd6a5a0 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:39 -0400
Subject: [PATCH 175/863] fsnotify: pass both the vfsmount mark and inode mark
should_send_event() and handle_event() will both need to look up the inode
event if they get a vfsmount event. Lets just pass both at the same time
since we have them both after walking the lists in lockstep.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 18 ++++---
fs/notify/fanotify/fanotify.c | 15 ++++--
fs/notify/fsnotify.c | 70 +++++++++++++++++++---------
fs/notify/inotify/inotify_fsnotify.c | 12 +++--
include/linux/fsnotify_backend.h | 7 ++-
kernel/audit_tree.c | 6 ++-
kernel/audit_watch.c | 8 ++--
7 files changed, 91 insertions(+), 45 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index e92b2c87ae944..bda588b831ada 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -83,7 +83,8 @@ static void dnotify_recalc_inode_mask(struct fsnotify_mark *fsn_mark)
* events.
*/
static int dnotify_handle_event(struct fsnotify_group *group,
- struct fsnotify_mark *mark,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
struct fsnotify_event *event)
{
struct dnotify_mark *dn_mark;
@@ -93,11 +94,13 @@ static int dnotify_handle_event(struct fsnotify_group *group,
struct fown_struct *fown;
__u32 test_mask = event->mask & ~FS_EVENT_ON_CHILD;
+ BUG_ON(vfsmount_mark);
+
to_tell = event->to_tell;
- dn_mark = container_of(mark, struct dnotify_mark, fsn_mark);
+ dn_mark = container_of(inode_mark, struct dnotify_mark, fsn_mark);
- spin_lock(&mark->lock);
+ spin_lock(&inode_mark->lock);
prev = &dn_mark->dn;
while ((dn = *prev) != NULL) {
if ((dn->dn_mask & test_mask) == 0) {
@@ -111,11 +114,11 @@ static int dnotify_handle_event(struct fsnotify_group *group,
else {
*prev = dn->dn_next;
kmem_cache_free(dnotify_struct_cache, dn);
- dnotify_recalc_inode_mask(mark);
+ dnotify_recalc_inode_mask(inode_mark);
}
}
- spin_unlock(&mark->lock);
+ spin_unlock(&inode_mark->lock);
return 0;
}
@@ -126,8 +129,9 @@ static int dnotify_handle_event(struct fsnotify_group *group,
*/
static bool dnotify_should_send_event(struct fsnotify_group *group,
struct inode *inode, struct vfsmount *mnt,
- struct fsnotify_mark *mark, __u32 mask,
- void *data, int data_type)
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ __u32 mask, void *data, int data_type)
{
/* not a dir, dnotify doesn't care */
if (!S_ISDIR(inode->i_mode))
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index fbd7f35c6134b..ef4fa4a45c94c 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -115,7 +115,8 @@ static int fanotify_get_response_from_access(struct fsnotify_group *group,
#endif
static int fanotify_handle_event(struct fsnotify_group *group,
- struct fsnotify_mark *mark,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *fanotify_mark,
struct fsnotify_event *event)
{
int ret = 0;
@@ -196,8 +197,11 @@ static bool should_send_inode_event(struct fsnotify_group *group,
return true;
}
-static bool fanotify_should_send_event(struct fsnotify_group *group, struct inode *to_tell,
- struct vfsmount *mnt, struct fsnotify_mark *mark,
+static bool fanotify_should_send_event(struct fsnotify_group *group,
+ struct inode *to_tell,
+ struct vfsmount *mnt,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type)
{
pr_debug("%s: group=%p to_tell=%p mnt=%p mask=%x data=%p data_type=%d\n",
@@ -213,9 +217,10 @@ static bool fanotify_should_send_event(struct fsnotify_group *group, struct inod
return false;
if (mnt)
- return should_send_vfsmount_event(group, mnt, to_tell, mark, mask);
+ return should_send_vfsmount_event(group, mnt, to_tell,
+ vfsmount_mark, mask);
else
- return should_send_inode_event(group, to_tell, mark, mask);
+ return should_send_inode_event(group, to_tell, inode_mark, mask);
}
const struct fsnotify_ops fanotify_fsnotify_ops = {
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index cdaa51cb698cf..090b64c3b4f98 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -141,28 +141,51 @@ void __fsnotify_parent(struct file *file, struct dentry *dentry, __u32 mask)
EXPORT_SYMBOL_GPL(__fsnotify_parent);
static int send_to_group(struct inode *to_tell, struct vfsmount *mnt,
- struct fsnotify_mark *mark,
- __u32 mask, void *data,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
+ __u32 mask, void *data,
int data_is, u32 cookie,
const unsigned char *file_name,
struct fsnotify_event **event)
{
- struct fsnotify_group *group = mark->group;
- __u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
+ struct fsnotify_group *group = inode_mark->group;
+ __u32 inode_test_mask = (mask & ~FS_EVENT_ON_CHILD);
+ __u32 vfsmount_test_mask = (mask & ~FS_EVENT_ON_CHILD);
pr_debug("%s: group=%p to_tell=%p mnt=%p mark=%p mask=%x data=%p"
" data_is=%d cookie=%d event=%p\n", __func__, group, to_tell,
- mnt, mark, mask, data, data_is, cookie, *event);
+ mnt, inode_mark, mask, data, data_is, cookie, *event);
+
+ /* clear ignored on inode modification */
+ if (mask & FS_MODIFY) {
+ if (inode_mark &&
+ !(inode_mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ inode_mark->ignored_mask = 0;
+ if (vfsmount_mark &&
+ !(vfsmount_mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
+ vfsmount_mark->ignored_mask = 0;
+ }
- if ((mask & FS_MODIFY) &&
- !(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY))
- mark->ignored_mask = 0;
+ /* does the inode mark tell us to do something? */
+ if (inode_mark) {
+ inode_test_mask &= inode_mark->mask;
+ inode_test_mask &= ~inode_mark->ignored_mask;
+ }
- if (!(test_mask & mark->mask & ~mark->ignored_mask))
+ /* does the vfsmount_mark tell us to do something? */
+ if (vfsmount_mark) {
+ vfsmount_test_mask &= vfsmount_mark->mask;
+ vfsmount_test_mask &= ~vfsmount_mark->ignored_mask;
+ if (inode_mark)
+ vfsmount_test_mask &= ~inode_mark->ignored_mask;
+ }
+
+ if (!inode_test_mask && !vfsmount_test_mask)
return 0;
- if (group->ops->should_send_event(group, to_tell, mnt, mark, mask,
- data, data_is) == false)
+ if (group->ops->should_send_event(group, to_tell, mnt, inode_mark,
+ vfsmount_mark, mask, data,
+ data_is) == false)
return 0;
if (!*event) {
@@ -172,7 +195,7 @@ static int send_to_group(struct inode *to_tell, struct vfsmount *mnt,
if (!*event)
return -ENOMEM;
}
- return group->ops->handle_event(group, mark, *event);
+ return group->ops->handle_event(group, inode_mark, vfsmount_mark, *event);
}
/*
@@ -213,14 +236,16 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
if ((mask & FS_MODIFY) ||
(test_mask & to_tell->i_fsnotify_mask))
- inode_node = to_tell->i_fsnotify_marks.first;
+ inode_node = srcu_dereference(to_tell->i_fsnotify_marks.first,
+ &fsnotify_mark_srcu);
else
inode_node = NULL;
if (mnt) {
if ((mask & FS_MODIFY) ||
(test_mask & mnt->mnt_fsnotify_mask))
- vfsmount_node = mnt->mnt_fsnotify_marks.first;
+ vfsmount_node = srcu_dereference(mnt->mnt_fsnotify_marks.first,
+ &fsnotify_mark_srcu);
else
vfsmount_node = NULL;
} else {
@@ -245,26 +270,27 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
if (inode_group < vfsmount_group) {
/* handle inode */
- send_to_group(to_tell, NULL, inode_mark, mask, data,
+ send_to_group(to_tell, NULL, inode_mark, NULL, mask, data,
data_is, cookie, file_name, &event);
used_inode = true;
} else if (vfsmount_group < inode_group) {
- send_to_group(to_tell, mnt, vfsmount_mark, mask, data,
+ send_to_group(to_tell, mnt, NULL, vfsmount_mark, mask, data,
data_is, cookie, file_name, &event);
used_vfsmount = true;
} else {
- send_to_group(to_tell, mnt, vfsmount_mark, mask, data,
- data_is, cookie, file_name, &event);
+ send_to_group(to_tell, mnt, inode_mark, vfsmount_mark,
+ mask, data, data_is, cookie, file_name,
+ &event);
used_vfsmount = true;
- send_to_group(to_tell, NULL, inode_mark, mask, data,
- data_is, cookie, file_name, &event);
used_inode = true;
}
if (used_inode)
- inode_node = inode_node->next;
+ inode_node = srcu_dereference(inode_node->next,
+ &fsnotify_mark_srcu);
if (used_vfsmount)
- vfsmount_node = vfsmount_node->next;
+ vfsmount_node = srcu_dereference(vfsmount_node->next,
+ &fsnotify_mark_srcu);
}
srcu_read_unlock(&fsnotify_mark_srcu, idx);
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 7cf518b25daac..e53f49731b6e3 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -90,7 +90,8 @@ static struct fsnotify_event *inotify_merge(struct list_head *list,
}
static int inotify_handle_event(struct fsnotify_group *group,
- struct fsnotify_mark *mark,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
struct fsnotify_event *event)
{
struct inotify_inode_mark *i_mark;
@@ -100,12 +101,14 @@ static int inotify_handle_event(struct fsnotify_group *group,
struct fsnotify_event *added_event;
int wd, ret = 0;
+ BUG_ON(vfsmount_mark);
+
pr_debug("%s: group=%p event=%p to_tell=%p mask=%x\n", __func__, group,
event, event->to_tell, event->mask);
to_tell = event->to_tell;
- i_mark = container_of(mark, struct inotify_inode_mark,
+ i_mark = container_of(inode_mark, struct inotify_inode_mark,
fsn_mark);
wd = i_mark->wd;
@@ -127,8 +130,8 @@ static int inotify_handle_event(struct fsnotify_group *group,
ret = PTR_ERR(added_event);
}
- if (mark->mask & IN_ONESHOT)
- fsnotify_destroy_mark(mark);
+ if (inode_mark->mask & IN_ONESHOT)
+ fsnotify_destroy_mark(inode_mark);
return ret;
}
@@ -140,6 +143,7 @@ static void inotify_freeing_mark(struct fsnotify_mark *fsn_mark, struct fsnotify
static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
struct vfsmount *mnt, struct fsnotify_mark *mark,
+ struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type)
{
if ((mark->mask & FS_EXCL_UNLINK) &&
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 2e7cc8c2a1511..d38f922977f92 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -92,9 +92,12 @@ struct fsnotify_event_private_data;
*/
struct fsnotify_ops {
bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, struct fsnotify_mark *mark,
+ struct vfsmount *mnt, struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type);
- int (*handle_event)(struct fsnotify_group *group, struct fsnotify_mark *mark,
+ int (*handle_event)(struct fsnotify_group *group,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
struct fsnotify_event *event);
void (*free_group_priv)(struct fsnotify_group *group);
void (*freeing_mark)(struct fsnotify_mark *mark, struct fsnotify_group *group);
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 2abb99f3459d1..781ab7f4e35c7 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -904,7 +904,8 @@ static void evict_chunk(struct audit_chunk *chunk)
}
static int audit_tree_handle_event(struct fsnotify_group *group,
- struct fsnotify_mark *mark,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmonut_mark,
struct fsnotify_event *event)
{
BUG();
@@ -920,7 +921,8 @@ static void audit_tree_freeing_mark(struct fsnotify_mark *entry, struct fsnotify
}
static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, struct fsnotify_mark *mark,
+ struct vfsmount *mnt, struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type)
{
return false;
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 1b87e757845d2..a273cf340527d 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -503,7 +503,8 @@ void audit_remove_watch_rule(struct audit_krule *krule)
}
static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, struct fsnotify_mark *mark,
+ struct vfsmount *mnt, struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type)
{
return true;
@@ -511,7 +512,8 @@ static bool audit_watch_should_send_event(struct fsnotify_group *group, struct i
/* Update watch data in audit rules based on fsnotify events. */
static int audit_watch_handle_event(struct fsnotify_group *group,
- struct fsnotify_mark *mark,
+ struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *vfsmount_mark,
struct fsnotify_event *event)
{
struct inode *inode;
@@ -519,7 +521,7 @@ static int audit_watch_handle_event(struct fsnotify_group *group,
const char *dname = event->file_name;
struct audit_parent *parent;
- parent = container_of(mark, struct audit_parent, mark);
+ parent = container_of(inode_mark, struct audit_parent, mark);
BUG_ON(group != audit_watch_group);
--
GitLab
From 1968f5eed54ce47bde488fd9a450912e4a2d7138 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 28 Jul 2010 10:18:39 -0400
Subject: [PATCH 176/863] fanotify: use both marks when possible
fanotify currently, when given a vfsmount_mark will look up (if it exists)
the corresponding inode mark. This patch drops that lookup and uses the
mark provided.
Signed-off-by: Eric Paris <eparis@redhat.com>
---
fs/notify/dnotify/dnotify.c | 2 +-
fs/notify/fanotify/fanotify.c | 88 +++++++++++-----------------
fs/notify/fsnotify.c | 2 +-
fs/notify/inotify/inotify_fsnotify.c | 4 +-
include/linux/fsnotify_backend.h | 2 +-
kernel/audit_tree.c | 2 +-
kernel/audit_watch.c | 2 +-
7 files changed, 41 insertions(+), 61 deletions(-)
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index bda588b831ada..3344bdd5506e3 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -128,7 +128,7 @@ static int dnotify_handle_event(struct fsnotify_group *group,
* userspace notification for that pair.
*/
static bool dnotify_should_send_event(struct fsnotify_group *group,
- struct inode *inode, struct vfsmount *mnt,
+ struct inode *inode,
struct fsnotify_mark *inode_mark,
struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index ef4fa4a45c94c..eb8f73c9c131f 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -153,59 +153,20 @@ static int fanotify_handle_event(struct fsnotify_group *group,
return ret;
}
-static bool should_send_vfsmount_event(struct fsnotify_group *group,
- struct vfsmount *mnt,
- struct inode *inode,
- struct fsnotify_mark *mnt_mark,
- __u32 mask)
-{
- struct fsnotify_mark *inode_mark;
-
- pr_debug("%s: group=%p vfsmount=%p mark=%p mask=%x\n",
- __func__, group, mnt, mnt_mark, mask);
-
- mask &= mnt_mark->mask;
- mask &= ~mnt_mark->ignored_mask;
-
- if (mask) {
- inode_mark = fsnotify_find_inode_mark(group, inode);
- if (inode_mark) {
- mask &= ~inode_mark->ignored_mask;
- fsnotify_put_mark(inode_mark);
- }
- }
-
- return mask;
-}
-
-static bool should_send_inode_event(struct fsnotify_group *group,
- struct inode *inode,
- struct fsnotify_mark *mark,
- __u32 mask)
-{
- pr_debug("%s: group=%p inode=%p mark=%p mask=%x\n",
- __func__, group, inode, mark, mask);
-
- /*
- * if the event is for a child and this inode doesn't care about
- * events on the child, don't send it!
- */
- if ((mask & FS_EVENT_ON_CHILD) &&
- !(mark->mask & FS_EVENT_ON_CHILD))
- return false;
- else
- return true;
-}
-
static bool fanotify_should_send_event(struct fsnotify_group *group,
struct inode *to_tell,
- struct vfsmount *mnt,
struct fsnotify_mark *inode_mark,
- struct fsnotify_mark *vfsmount_mark,
- __u32 mask, void *data, int data_type)
+ struct fsnotify_mark *vfsmnt_mark,
+ __u32 event_mask, void *data, int data_type)
{
- pr_debug("%s: group=%p to_tell=%p mnt=%p mask=%x data=%p data_type=%d\n",
- __func__, group, to_tell, mnt, mask, data, data_type);
+ __u32 marks_mask, marks_ignored_mask;
+
+ pr_debug("%s: group=%p to_tell=%p inode_mark=%p vfsmnt_mark=%p "
+ "mask=%x data=%p data_type=%d\n", __func__, group, to_tell,
+ inode_mark, vfsmnt_mark, event_mask, data, data_type);
+
+ pr_debug("%s: group=%p vfsmount_mark=%p inode_mark=%p mask=%x\n",
+ __func__, group, vfsmnt_mark, inode_mark, event_mask);
/* sorry, fanotify only gives a damn about files and dirs */
if (!S_ISREG(to_tell->i_mode) &&
@@ -216,11 +177,30 @@ static bool fanotify_should_send_event(struct fsnotify_group *group,
if (data_type != FSNOTIFY_EVENT_FILE)
return false;
- if (mnt)
- return should_send_vfsmount_event(group, mnt, to_tell,
- vfsmount_mark, mask);
- else
- return should_send_inode_event(group, to_tell, inode_mark, mask);
+ if (inode_mark && vfsmnt_mark) {
+ marks_mask = (vfsmnt_mark->mask | inode_mark->mask);
+ marks_ignored_mask = (vfsmnt_mark->ignored_mask | inode_mark->ignored_mask);
+ } else if (inode_mark) {
+ /*
+ * if the event is for a child and this inode doesn't care about
+ * events on the child, don't send it!
+ */
+ if ((event_mask & FS_EVENT_ON_CHILD) &&
+ !(inode_mark->mask & FS_EVENT_ON_CHILD))
+ return false;
+ marks_mask = inode_mark->mask;
+ marks_ignored_mask = inode_mark->ignored_mask;
+ } else if (vfsmnt_mark) {
+ marks_mask = vfsmnt_mark->mask;
+ marks_ignored_mask = vfsmnt_mark->ignored_mask;
+ } else {
+ BUG();
+ }
+
+ if (event_mask & marks_mask & ~marks_ignored_mask)
+ return true;
+
+ return false;
}
const struct fsnotify_ops fanotify_fsnotify_ops = {
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 090b64c3b4f98..4d2a82c1ceb1b 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -183,7 +183,7 @@ static int send_to_group(struct inode *to_tell, struct vfsmount *mnt,
if (!inode_test_mask && !vfsmount_test_mask)
return 0;
- if (group->ops->should_send_event(group, to_tell, mnt, inode_mark,
+ if (group->ops->should_send_event(group, to_tell, inode_mark,
vfsmount_mark, mask, data,
data_is) == false)
return 0;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index e53f49731b6e3..5e73eeb2c6972 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -142,11 +142,11 @@ static void inotify_freeing_mark(struct fsnotify_mark *fsn_mark, struct fsnotify
}
static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, struct fsnotify_mark *mark,
+ struct fsnotify_mark *inode_mark,
struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type)
{
- if ((mark->mask & FS_EXCL_UNLINK) &&
+ if ((inode_mark->mask & FS_EXCL_UNLINK) &&
(data_type == FSNOTIFY_EVENT_FILE)) {
struct file *file = data;
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index d38f922977f92..9bbfd7204b04a 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -92,7 +92,7 @@ struct fsnotify_event_private_data;
*/
struct fsnotify_ops {
bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *inode_mark,
struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type);
int (*handle_event)(struct fsnotify_group *group,
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 781ab7f4e35c7..7f18d3a4527ea 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -921,7 +921,7 @@ static void audit_tree_freeing_mark(struct fsnotify_mark *entry, struct fsnotify
}
static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *inode_mark,
struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type)
{
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index a273cf340527d..6bf2306be7d69 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -503,7 +503,7 @@ void audit_remove_watch_rule(struct audit_krule *krule)
}
static bool audit_watch_should_send_event(struct fsnotify_group *group, struct inode *inode,
- struct vfsmount *mnt, struct fsnotify_mark *inode_mark,
+ struct fsnotify_mark *inode_mark,
struct fsnotify_mark *vfsmount_mark,
__u32 mask, void *data, int data_type)
{
--
GitLab
From b94de9bb7519f597a3aed521d5eaeb5b02a7cbc0 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed, 28 Jul 2010 22:59:02 +0100
Subject: [PATCH 177/863] lib/scatterlist: Hook sg_kmalloc into kmemleak (v2)
kmemleak ignores page_alloc() and so believes the final sub-page
allocation using the plain kmalloc is decoupled and lost. This leads to
lots of false-positives with code that uses scatterlists.
The options seem to be either to tell kmemleak that the kmalloc is not
leaked or to notify kmemleak of the page allocations. The danger of the
first approach is that we may hide a real leak, so choose the latter
approach (of which I am not sure of the downsides).
v2: Added comments on the suggestion of Catalin.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
lib/scatterlist.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 9afa25b52a83f..a5ec42868f99d 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -10,6 +10,7 @@
#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <linux/highmem.h>
+#include <linux/kmemleak.h>
/**
* sg_next - return the next scatterlist entry in a list
@@ -115,17 +116,29 @@ EXPORT_SYMBOL(sg_init_one);
*/
static struct scatterlist *sg_kmalloc(unsigned int nents, gfp_t gfp_mask)
{
- if (nents == SG_MAX_SINGLE_ALLOC)
- return (struct scatterlist *) __get_free_page(gfp_mask);
- else
+ if (nents == SG_MAX_SINGLE_ALLOC) {
+ /*
+ * Kmemleak doesn't track page allocations as they are not
+ * commonly used (in a raw form) for kernel data structures.
+ * As we chain together a list of pages and then a normal
+ * kmalloc (tracked by kmemleak), in order to for that last
+ * allocation not to become decoupled (and thus a
+ * false-positive) we need to inform kmemleak of all the
+ * intermediate allocations.
+ */
+ void *ptr = (void *) __get_free_page(gfp_mask);
+ kmemleak_alloc(ptr, PAGE_SIZE, 1, gfp_mask);
+ return ptr;
+ } else
return kmalloc(nents * sizeof(struct scatterlist), gfp_mask);
}
static void sg_kfree(struct scatterlist *sg, unsigned int nents)
{
- if (nents == SG_MAX_SINGLE_ALLOC)
+ if (nents == SG_MAX_SINGLE_ALLOC) {
+ kmemleak_free(sg);
free_page((unsigned long) sg);
- else
+ } else
kfree(sg);
}
--
GitLab
From a4b81ca50974051195b11ca173da073b961f94d5 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 22 May 2010 22:16:26 +0200
Subject: [PATCH 178/863] mtd: sst25l: check for null consistently
The rest of the function assumes that "data" can be null. I don't know
the code well enough to say whether it can actually be null, but there
is no harm in checking here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/devices/sst25l.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index ab5d8cd02a15a..684247a8a5eda 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -454,7 +454,7 @@ static int __init sst25l_probe(struct spi_device *spi)
parts, nr_parts);
}
- } else if (data->nr_parts) {
+ } else if (data && data->nr_parts) {
dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
data->nr_parts, data->name);
}
--
GitLab
From 6c49939869c20550512386610ece45aceb65e7f4 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 28 May 2010 10:02:17 +0200
Subject: [PATCH 179/863] mtd: mxc_nand: fix OOB accesses on i.MX27
The OOB handling in the mxc_nand driver is broken for v1 type
controllers (i.MX27/31) with 512 byte page size. This perhaps
did not show up because ubi does not use OOB.
Update the driver to always read/write a whole page even if
only OOB is requested. With this patch the driver passes the
mtd_oobtest on i.MX27 with 512 byte page size. Also tested
with 2048 byte page size and on i.MX35 (v2 type controller)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 31 +++++--------------------------
1 file changed, 5 insertions(+), 26 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 82e94389824e7..6e8aa34e4dfc3 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -623,8 +623,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
else
host->buf_start = column + mtd->writesize;
- if (mtd->writesize > 512)
- command = NAND_CMD_READ0; /* only READ0 is valid */
+ command = NAND_CMD_READ0; /* only READ0 is valid */
send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
@@ -639,31 +638,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
break;
case NAND_CMD_SEQIN:
- if (column >= mtd->writesize) {
- /*
- * FIXME: before send SEQIN command for write OOB,
- * We must read one page out.
- * For K9F1GXX has no READ1 command to set current HW
- * pointer to spare area, we must write the whole page
- * including OOB together.
- */
- if (mtd->writesize > 512)
- /* call ourself to read a page */
- mxc_nand_command(mtd, NAND_CMD_READ0, 0,
- page_addr);
-
- host->buf_start = column;
-
- /* Set program pointer to spare region */
- if (mtd->writesize == 512)
- send_cmd(host, NAND_CMD_READOOB, false);
- } else {
- host->buf_start = column;
+ if (column >= mtd->writesize)
+ /* call ourself to read a page */
+ mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
- /* Set program pointer to page start */
- if (mtd->writesize == 512)
- send_cmd(host, NAND_CMD_READ0, false);
- }
+ host->buf_start = column;
send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
--
GitLab
From 8c1a1158c98b810d34b469c787840ac16904e5fa Mon Sep 17 00:00:00 2001
From: Kyle Spaans <kspaans@uwaterloo.ca>
Date: Tue, 8 Jun 2010 09:48:22 -0400
Subject: [PATCH 180/863] mtd: remove redundant dependency checks in Kconfig
files
Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them.
Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca>
Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/Kconfig | 1 -
drivers/mtd/nand/Kconfig | 30 ++++++++++++++----------------
drivers/mtd/onenand/Kconfig | 4 ++--
3 files changed, 16 insertions(+), 19 deletions(-)
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index f8210bf2d2414..71eda03b925f2 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -319,7 +319,6 @@ config SM_FTL
config MTD_OOPS
tristate "Log panic/oops to an MTD buffer"
- depends on MTD
help
This enables panic and oops messages to be logged to a circular
buffer in a flash partition where it can be read back at some
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index ffc3720929f10..4d4066f315be2 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -37,7 +37,6 @@ config MTD_SM_COMMON
config MTD_NAND_MUSEUM_IDS
bool "Enable chip ids for obsolete ancient NAND devices"
- depends on MTD_NAND
default n
help
Enable this option only when your board has first generation
@@ -101,13 +100,13 @@ config MTD_NAND_AMS_DELTA
config MTD_NAND_OMAP2
tristate "NAND Flash device on OMAP2 and OMAP3"
- depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
help
Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
config MTD_NAND_OMAP_PREFETCH
bool "GPMC prefetch support for NAND Flash device"
- depends on MTD_NAND && MTD_NAND_OMAP2
+ depends on MTD_NAND_OMAP2
default y
help
The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
@@ -146,7 +145,7 @@ config MTD_NAND_AU1550
config MTD_NAND_BF5XX
tristate "Blackfin on-chip NAND Flash Controller driver"
- depends on (BF54x || BF52x) && MTD_NAND
+ depends on BF54x || BF52x
help
This enables the Blackfin on-chip NAND flash controller
@@ -236,7 +235,7 @@ config MTD_NAND_S3C2410_CLKSTOP
config MTD_NAND_BCM_UMI
tristate "NAND Flash support for BCM Reference Boards"
- depends on ARCH_BCMRING && MTD_NAND
+ depends on ARCH_BCMRING
help
This enables the NAND flash controller on the BCM UMI block.
@@ -395,7 +394,7 @@ endchoice
config MTD_NAND_PXA3xx
tristate "Support for NAND flash devices on PXA3xx"
- depends on MTD_NAND && (PXA3xx || ARCH_MMP)
+ depends on PXA3xx || ARCH_MMP
help
This enables the driver for the NAND flash device found on
PXA3xx processors
@@ -409,18 +408,18 @@ config MTD_NAND_PXA3xx_BUILTIN
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
- depends on MTD_NAND && MACH_ARMCORE
+ depends on MACH_ARMCORE
config MTD_NAND_PASEMI
tristate "NAND support for PA Semi PWRficient"
- depends on MTD_NAND && PPC_PASEMI
+ depends on PPC_PASEMI
help
Enables support for NAND Flash interface on PA Semi PWRficient
based boards
config MTD_NAND_TMIO
tristate "NAND Flash device on Toshiba Mobile IO Controller"
- depends on MTD_NAND && MFD_TMIO
+ depends on MFD_TMIO
help
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.
@@ -434,7 +433,6 @@ config MTD_NAND_NANDSIM
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
- depends on MTD_NAND
help
This implements a generic NAND driver for on-SOC platform
devices. You will need to provide platform-specific functions
@@ -442,14 +440,14 @@ config MTD_NAND_PLATFORM
config MTD_ALAUDA
tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
- depends on MTD_NAND && USB
+ depends on USB
help
These two (and possibly other) Alauda-based cardreaders for
SmartMedia and xD allow raw flash access.
config MTD_NAND_ORION
tristate "NAND Flash support for Marvell Orion SoC"
- depends on PLAT_ORION && MTD_NAND
+ depends on PLAT_ORION
help
This enables the NAND flash controller on Orion machines.
@@ -458,7 +456,7 @@ config MTD_NAND_ORION
config MTD_NAND_FSL_ELBC
tristate "NAND support for Freescale eLBC controllers"
- depends on MTD_NAND && PPC_OF
+ depends on PPC_OF
help
Various Freescale chips, including the 8313, include a NAND Flash
Controller Module with built-in hardware ECC capabilities.
@@ -467,7 +465,7 @@ config MTD_NAND_FSL_ELBC
config MTD_NAND_FSL_UPM
tristate "Support for NAND on Freescale UPM"
- depends on MTD_NAND && (PPC_83xx || PPC_85xx)
+ depends on PPC_83xx || PPC_85xx
select FSL_LBC
help
Enables support for NAND Flash chips wired onto Freescale PowerPC
@@ -495,7 +493,7 @@ config MTD_NAND_NOMADIK
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
- depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
+ depends on SUPERH || ARCH_SHMOBILE
help
Several Renesas SuperH CPU has FLCTL. This option enables support
for NAND Flash using FLCTL.
@@ -515,7 +513,7 @@ config MTD_NAND_TXX9NDFMC
config MTD_NAND_SOCRATES
tristate "Support for NAND on Socrates board"
- depends on MTD_NAND && SOCRATES
+ depends on SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 9a49d68ba5f90..3f32289fdbb59 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -25,14 +25,14 @@ config MTD_ONENAND_GENERIC
config MTD_ONENAND_OMAP2
tristate "OneNAND on OMAP2/OMAP3 support"
- depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ depends on ARCH_OMAP2 || ARCH_OMAP3
help
Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
via the GPMC memory controller.
config MTD_ONENAND_SAMSUNG
tristate "OneNAND on Samsung SOC controller support"
- depends on MTD_ONENAND && (ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210)
+ depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
help
Support for a OneNAND flash device connected to an Samsung SOC
S3C64XX/S5PC1XX controller.
--
GitLab
From 007c2d8769139f3c9e99114219d6800aeccdfaef Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 31 May 2010 16:03:38 +0200
Subject: [PATCH 181/863] mtd: return success on blktrans_ioctl
There was a break missing so we returned -ENOTTY on success instead of
zero. This was introduced by 048d8719956: "mtd: blktrans: Hotplug fixes"
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/mtd_blkdevs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 03e19c1965cc0..a6bb5863e8f38 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -245,6 +245,7 @@ static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
switch (cmd) {
case BLKFLSBUF:
ret = dev->tr->flush ? dev->tr->flush(dev) : 0;
+ break;
default:
ret = -ENOTTY;
}
--
GitLab
From 6175f4a194653fad46218167fac05386972d995c Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Mon, 7 Jun 2010 19:31:01 +0100
Subject: [PATCH 182/863] mtd: m25p80: Add support for Macronix 25L8005
Add support for Macronix 25L8005. Tested on a HP t5325 Thin Client.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/devices/m25p80.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 81e49a9b017e3..372df59f79e2b 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -641,6 +641,7 @@ static const struct spi_device_id m25p_ids[] = {
/* Macronix */
{ "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
+ { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
{ "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) },
{ "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
--
GitLab
From 1df620637fc3b252b69c92ced486b5b6b643dd1a Mon Sep 17 00:00:00 2001
From: Karl Beldan <karl.beldan@gmail.com>
Date: Sat, 12 Jun 2010 12:25:13 +0200
Subject: [PATCH 183/863] mtd: denali: add Kconfig dependency
Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4d4066f315be2..1d69920a2c93d 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -60,6 +60,7 @@ config MTD_NAND_DENALI
config MTD_NAND_DENALI_SCRATCH_REG_ADDR
hex "Denali NAND size scratch register address"
default "0xFF108018"
+ depends on MTD_NAND_DENALI
help
Some platforms place the NAND chip size in a scratch register
because (some versions of) the driver aren't able to automatically
--
GitLab
From 9938424f0c4d208883cbf32083ec2bfcc220f85b Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Mon, 14 Jun 2010 18:10:33 +0200
Subject: [PATCH 184/863] mtd: add an ioctl to query the lock status of a flash
sector
This patchs adds a way for user space programs to find out whether a
flash sector is locked. An optional driver method in the mtd_info struct
provides the information.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/chips/cfi_cmdset_0001.c | 10 ++++++++++
drivers/mtd/mtdchar.c | 14 ++++++++++++++
drivers/mtd/mtdpart.c | 10 ++++++++++
include/linux/mtd/mtd.h | 1 +
include/mtd/mtd-abi.h | 1 +
5 files changed, 36 insertions(+)
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 62f3ea9de848c..2fadb0239ba32 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -63,6 +63,8 @@ static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *);
static void cfi_intelext_sync (struct mtd_info *);
static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len);
#ifdef CONFIG_MTD_OTP
static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
@@ -448,6 +450,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
mtd->sync = cfi_intelext_sync;
mtd->lock = cfi_intelext_lock;
mtd->unlock = cfi_intelext_unlock;
+ mtd->is_locked = cfi_intelext_is_locked;
mtd->suspend = cfi_intelext_suspend;
mtd->resume = cfi_intelext_resume;
mtd->flags = MTD_CAP_NORFLASH;
@@ -2139,6 +2142,13 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
return ret;
}
+static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return cfi_varsize_frob(mtd, do_getlockstatus_oneblock,
+ ofs, len, NULL) ? 1 : 0;
+}
+
#ifdef CONFIG_MTD_OTP
typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip,
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 8b223c0343eee..a8e69dd2b2e47 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -676,6 +676,20 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
break;
}
+ case MEMISLOCKED:
+ {
+ struct erase_info_user einfo;
+
+ if (copy_from_user(&einfo, argp, sizeof(einfo)))
+ return -EFAULT;
+
+ if (!mtd->is_locked)
+ ret = -EOPNOTSUPP;
+ else
+ ret = mtd->is_locked(mtd, einfo.start, einfo.length);
+ break;
+ }
+
/* Legacy interface */
case MEMGETOOBSEL:
{
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index b8043a9ba32d4..4c539ded0b709 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -264,6 +264,14 @@ static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
return part->master->unlock(part->master, ofs + part->offset, len);
}
+static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ struct mtd_part *part = PART(mtd);
+ if ((len + ofs) > mtd->size)
+ return -EINVAL;
+ return part->master->is_locked(part->master, ofs + part->offset, len);
+}
+
static void part_sync(struct mtd_info *mtd)
{
struct mtd_part *part = PART(mtd);
@@ -402,6 +410,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
slave->mtd.lock = part_lock;
if (master->unlock)
slave->mtd.unlock = part_unlock;
+ if (master->is_locked)
+ slave->mtd.is_locked = part_is_locked;
if (master->block_isbad)
slave->mtd.block_isbad = part_block_isbad;
if (master->block_markbad)
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 5326435a75717..43b7d72c6116a 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -216,6 +216,7 @@ struct mtd_info {
/* Chip-supported device locking */
int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+ int (*is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* Power Management functions */
int (*suspend) (struct mtd_info *mtd);
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index be51ae2bd0ffd..e12872e3c694b 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -110,6 +110,7 @@ struct otp_info {
#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
+#define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
/*
* Obsolete legacy interface. Keep it in order not to break userspace
--
GitLab
From 1d90d2c3d4ef8ba4f8e05b3578900397333b1bd1 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 14 Jun 2010 11:57:54 -0500
Subject: [PATCH 185/863] mtd: physmap: use resource_size()
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/maps/physmap.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 426461a5f0d43..829aa4bee54f6 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -106,12 +106,12 @@ static int physmap_flash_probe(struct platform_device *dev)
for (i = 0; i < dev->num_resources; i++) {
printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n",
- (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1),
+ (unsigned long long)resource_size(&dev->resource[i]),
(unsigned long long)dev->resource[i].start);
if (!devm_request_mem_region(&dev->dev,
dev->resource[i].start,
- dev->resource[i].end - dev->resource[i].start + 1,
+ resource_size(&dev->resource[i]),
dev_name(&dev->dev))) {
dev_err(&dev->dev, "Could not reserve memory region\n");
err = -ENOMEM;
@@ -120,7 +120,7 @@ static int physmap_flash_probe(struct platform_device *dev)
info->map[i].name = dev_name(&dev->dev);
info->map[i].phys = dev->resource[i].start;
- info->map[i].size = dev->resource[i].end - dev->resource[i].start + 1;
+ info->map[i].size = resource_size(&dev->resource[i]);
info->map[i].bankwidth = physmap_data->width;
info->map[i].set_vpp = physmap_data->set_vpp;
info->map[i].pfow_base = physmap_data->pfow_base;
--
GitLab
From e2c848833c1835b6261e46836b2317fc9c3c2787 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Mon, 14 Jun 2010 09:01:51 +0200
Subject: [PATCH 186/863] mtd: mxc_nand: remove unused variable
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This fixes:
drivers/mtd/nand/mxc_nand.c: In function 'mxcnd_resume':
drivers/mtd/nand/mxc_nand.c:901: warning: unused variable 'host'
Removing this variable was missed in 9c14b153e6af.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 6e8aa34e4dfc3..68a7d37fd17c4 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -896,7 +896,6 @@ static int mxcnd_resume(struct platform_device *pdev)
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct nand_chip *nand_chip = mtd->priv;
- struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
--
GitLab
From 24cc7b8a2a48a5707637e918a51ea547efe24892 Mon Sep 17 00:00:00 2001
From: Brian Norris <norris@broadcom.com>
Date: Thu, 17 Jun 2010 12:35:11 -0700
Subject: [PATCH 187/863] mtd: nand_ids: add two entries for NAND chips
Included the basic size info for NAND chips with ID of 0xAD or
0xD7. The first can be found in Hynix HY27SF161G2M, while the
second can be found in Micron MT29F64G08 and the Samsung K9LBG08U0D
(among others). Also, some 64 Gbit (or larger) chips identify as
0xD7 because they contain multiple smaller 32 Gbit chips. I
assume it's safe to classify these under the 32 Gbit listing.
Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/nand_ids.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 89907ed990091..a04b89105b656 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -85,6 +85,7 @@ struct nand_flash_dev nand_flash_ids[] = {
{"NAND 128MiB 3,3V 8-bit", 0xD1, 0, 128, 0, LP_OPTIONS},
{"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16},
{"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0xAD, 0, 128, 0, LP_OPTIONS16},
/* 2 Gigabit */
{"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS},
@@ -110,6 +111,9 @@ struct nand_flash_dev nand_flash_ids[] = {
{"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16},
{"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16},
+ /* 32 Gigabit */
+ {"NAND 4GiB 3,3V 8-bit", 0xD7, 0, 4096, 0, LP_OPTIONS16},
+
/*
* Renesas AND 1 Gigabit. Those chips do not support extended id and
* have a strange page/block layout ! The chosen minimum erasesize is
--
GitLab
From e1d0fe3cddf2306e3ac32569aa152f1909c9b46e Mon Sep 17 00:00:00 2001
From: Martin Krause <Martin.Krause@tqs.de>
Date: Tue, 22 Jun 2010 15:00:19 +0200
Subject: [PATCH 188/863] mtd: mtdconcat: fix bug with uninitialized lock and
unlock functions
Test if a lock or unlock function is present (pointer not NULL) before
calling it, to prevent a kernel dump.
Artem: removed extra blank lines
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/mtdconcat.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 7e075621bbf43..4567bc373780f 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -540,10 +540,12 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
else
size = len;
- err = subdev->lock(subdev, ofs, size);
-
- if (err)
- break;
+ if (subdev->lock) {
+ err = subdev->lock(subdev, ofs, size);
+ if (err)
+ break;
+ } else
+ err = -EOPNOTSUPP;
len -= size;
if (len == 0)
@@ -578,10 +580,12 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
else
size = len;
- err = subdev->unlock(subdev, ofs, size);
-
- if (err)
- break;
+ if (subdev->unlock) {
+ err = subdev->unlock(subdev, ofs, size);
+ if (err)
+ break;
+ } else
+ err = -EOPNOTSUPP;
len -= size;
if (len == 0)
--
GitLab
From 30fe8115b55223cb84530ce04c4a20ba9d6dcf0b Mon Sep 17 00:00:00 2001
From: Brian Norris <norris@broadcom.com>
Date: Wed, 23 Jun 2010 13:36:02 -0700
Subject: [PATCH 189/863] mtd: nand: edit macro flag for BBT scan of last page
in block
NAND_BB_LAST_PAGE used to be in nand.h, but it pertained to bad block
management and so belongs next to NAND_BBT_SCAN2NDPAGE in bbm.h. Also,
its previous flag value (0x00000400) conflicted with NAND_BBT_SCANALLPAGES
so I changed its value to 0x00008000. All uses of the name were modified to
provide consistency with other "NAND_BBT_*" flags.
Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/nand_base.c | 6 +++---
drivers/mtd/nand/nand_bbt.c | 2 +-
include/linux/mtd/bbm.h | 2 ++
include/linux/mtd/nand.h | 2 --
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 4a7b86423ee96..e6cf9aefef133 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -347,7 +347,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
struct nand_chip *chip = mtd->priv;
u16 bad;
- if (chip->options & NAND_BB_LAST_PAGE)
+ if (chip->options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -399,7 +399,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
uint8_t buf[2] = { 0, 0 };
int block, ret;
- if (chip->options & NAND_BB_LAST_PAGE)
+ if (chip->options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
/* Get block number */
@@ -2946,7 +2946,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX))
- chip->options |= NAND_BB_LAST_PAGE;
+ chip->options |= NAND_BBT_SCANLASTPAGE;
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ad97c0ce73b26..71d83be24ff67 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -432,7 +432,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
- if (this->options & NAND_BB_LAST_PAGE)
+ if (this->options & NAND_BBT_SCANLASTPAGE)
from += mtd->erasesize - (mtd->writesize * len);
for (i = startblock; i < numblocks;) {
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 9c3757c5759db..8ad0b8629c3f8 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -82,6 +82,8 @@ struct nand_bbt_descr {
#define NAND_BBT_SAVECONTENT 0x00002000
/* Search good / bad pattern on the first and the second page */
#define NAND_BBT_SCAN2NDPAGE 0x00004000
+/* Search good / bad pattern on the last page of the eraseblock */
+#define NAND_BBT_SCANLASTPAGE 0x00008000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index a81b185e23a75..50f3aa00a4522 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -181,8 +181,6 @@ typedef enum {
#define NAND_NO_READRDY 0x00000100
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
-/* Chip stores bad block marker on the last page of the eraseblock */
-#define NAND_BB_LAST_PAGE 0x00000400
/* Device is one of 'new' xD cards that expose fake nand command set */
#define NAND_BROKEN_XD 0x00000400
--
GitLab
From 771a115a6df06c45cf783e24c3f1f08b3e9aac4c Mon Sep 17 00:00:00 2001
From: Guillaume LECERF <glecerf@gmail.com>
Date: Tue, 29 Jun 2010 10:32:37 +0200
Subject: [PATCH 190/863] mtd: cfi_probe: print manufacturer and id of probed
chip
Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/chips/cfi_probe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index b2acd32f4fbf8..8f5b96aa87a0a 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -235,9 +235,9 @@ static int __xipram cfi_chip_setup(struct map_info *map,
cfi_qry_mode_off(base, map, cfi);
xip_allowed(base, map);
- printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+ printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n",
map->name, cfi->interleave, cfi->device_type*8, base,
- map->bankwidth*8);
+ map->bankwidth*8, cfi->mfr, cfi->id);
return 1;
}
--
GitLab
From d5af6dcffabdab199ecca0141a3a00201e948275 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Tue, 29 Jun 2010 14:14:57 +0400
Subject: [PATCH 191/863] mtd: r852: remove casts from void
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/r852.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index bcfc851fe5506..9c9af62b7a0c6 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -64,8 +64,8 @@ static inline void r852_write_reg_dword(struct r852_device *dev,
/* returns pointer to our private structure */
static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
{
- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
- return (struct r852_device *)chip->priv;
+ struct nand_chip *chip = mtd->priv;
+ return chip->priv;
}
--
GitLab
From 42845d2a49e574788823ae5e91c39e64c25cd872 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Tue, 29 Jun 2010 14:15:13 +0400
Subject: [PATCH 192/863] mtd: dataflash: remove casts from void
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/devices/mtd_dataflash.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 19817404ce7d9..c5015cc721d50 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -141,7 +141,7 @@ static int dataflash_waitready(struct spi_device *spi)
*/
static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
struct spi_device *spi = priv->spi;
struct spi_transfer x = { .tx_dma = 0, };
struct spi_message msg;
@@ -231,7 +231,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
struct spi_transfer x[2] = { { .tx_dma = 0, }, };
struct spi_message msg;
unsigned int addr;
@@ -304,7 +304,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t * retlen, const u_char * buf)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
struct spi_device *spi = priv->spi;
struct spi_transfer x[2] = { { .tx_dma = 0, }, };
struct spi_message msg;
@@ -515,7 +515,7 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base,
static int dataflash_read_fact_otp(struct mtd_info *mtd,
loff_t from, size_t len, size_t *retlen, u_char *buf)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
int status;
/* 64 bytes, from 0..63 ... start at 64 on-chip */
@@ -532,7 +532,7 @@ static int dataflash_read_fact_otp(struct mtd_info *mtd,
static int dataflash_read_user_otp(struct mtd_info *mtd,
loff_t from, size_t len, size_t *retlen, u_char *buf)
{
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
int status;
/* 64 bytes, from 0..63 ... start at 0 on-chip */
@@ -553,7 +553,7 @@ static int dataflash_write_user_otp(struct mtd_info *mtd,
const size_t l = 4 + 64;
uint8_t *scratch;
struct spi_transfer t;
- struct dataflash *priv = (struct dataflash *)mtd->priv;
+ struct dataflash *priv = mtd->priv;
int status;
if (len > 64)
--
GitLab
From 7b8516b780ec639f26a4c6cdb51e342d8feecd44 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Tue, 29 Jun 2010 14:15:17 +0400
Subject: [PATCH 193/863] mtd: nandsim: remove casts from void
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/nandsim.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 261337efe0ee1..c25648bb57934 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -553,8 +553,8 @@ static uint64_t divide(uint64_t n, uint32_t d)
*/
static int init_nandsim(struct mtd_info *mtd)
{
- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
- struct nandsim *ns = (struct nandsim *)(chip->priv);
+ struct nand_chip *chip = mtd->priv;
+ struct nandsim *ns = chip->priv;
int i, ret = 0;
uint64_t remains;
uint64_t next_offset;
@@ -1877,7 +1877,7 @@ static void switch_state(struct nandsim *ns)
static u_char ns_nand_read_byte(struct mtd_info *mtd)
{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
u_char outb = 0x00;
/* Sanity and correctness checks */
@@ -1950,7 +1950,7 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
/* Sanity and correctness checks */
if (!ns->lines.ce) {
@@ -2132,7 +2132,7 @@ static uint16_t ns_nand_read_word(struct mtd_info *mtd)
static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
/* Check that chip is expecting data input */
if (!(ns->state & STATE_DATAIN_MASK)) {
@@ -2159,7 +2159,7 @@ static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
/* Sanity and correctness checks */
if (!ns->lines.ce) {
@@ -2352,7 +2352,7 @@ module_init(ns_init_module);
*/
static void __exit ns_cleanup_module(void)
{
- struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv);
+ struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
int i;
free_nandsim(ns); /* Free nandsim private resources */
--
GitLab
From 029919c1ed79e409cbcdbfaf621b2077e72ccea6 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Tue, 29 Jun 2010 14:15:20 +0400
Subject: [PATCH 194/863] mtd: r852: remove casts from void
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/r852.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 9c9af62b7a0c6..5169ca6a66bcd 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -380,7 +380,7 @@ void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl)
*/
int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
- struct r852_device *dev = (struct r852_device *)chip->priv;
+ struct r852_device *dev = chip->priv;
unsigned long timeout;
int status;
--
GitLab
From ece0ac98a13a555e6d46a02225fa15934abe7a3d Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Tue, 29 Jun 2010 14:15:24 +0400
Subject: [PATCH 195/863] mtd: sm_common: remove casts from void
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/sm_common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index ac80fb362e632..4a8f367c295c4 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -109,7 +109,7 @@ static struct nand_flash_dev nand_xd_flash_ids[] = {
int sm_register_device(struct mtd_info *mtd, int smartmedia)
{
- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+ struct nand_chip *chip = mtd->priv;
int ret;
chip->options |= NAND_SKIP_BBTSCAN;
--
GitLab
From 7fc14bcee0fc0fe1b7e1bd78d4fc0da395ebef35 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 13 Jul 2010 13:24:31 +0300
Subject: [PATCH 196/863] mtd: tests: return -1 if verify failed
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/tests/mtd_pagetest.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 6bc1b8276c627..00b937e38c1d5 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -310,7 +310,7 @@ static int crosstest(void)
static int erasecrosstest(void)
{
size_t read = 0, written = 0;
- int err = 0, i, ebnum, ok = 1, ebnum2;
+ int err = 0, i, ebnum, ebnum2;
loff_t addr0;
char *readbuf = twopages;
@@ -357,8 +357,7 @@ static int erasecrosstest(void)
if (memcmp(writebuf, readbuf, pgsize)) {
printk(PRINT_PREF "verify failed!\n");
errcnt += 1;
- ok = 0;
- return err;
+ return -1;
}
printk(PRINT_PREF "erasing block %d\n", ebnum);
@@ -396,10 +395,10 @@ static int erasecrosstest(void)
if (memcmp(writebuf, readbuf, pgsize)) {
printk(PRINT_PREF "verify failed!\n");
errcnt += 1;
- ok = 0;
+ return -1;
}
- if (ok && !err)
+ if (!err)
printk(PRINT_PREF "erasecrosstest ok\n");
return err;
}
--
GitLab
From 6a8cfcfb0de881735df4031eb5cc99be3d0971e9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 10 Jun 2010 16:03:04 +0200
Subject: [PATCH 197/863] mtd: mxc_nand: fix unbalanced enable for IRQ
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
* preset should be done before sending the reset command
* without this, I get the following error on an i.MX35 :
[ 0.900000] ------------[ cut here ]------------
[ 0.900000] WARNING: at kernel/irq/manage.c:290 __enable_irq+0x4c/0x88()
[ 0.900000] Unbalanced enable for IRQ 33
[ 0.900000] Modules linked in:
[ 0.900000] [<c002ffb8>] (unwind_backtrace+0x0/0xf0) from [<c02f7d0c>] (dump_stack+0x18/0x1c)
[ 0.900000] [<c02f7d0c>] (dump_stack+0x18/0x1c) from [<c0049a44>] (warn_slowpath_common+0x54/0x6c)
[ 0.900000] [<c0049a44>] (warn_slowpath_common+0x54/0x6c) from [<c0049b00>] (warn_slowpath_fmt+0x38/0x40)
[ 0.900000] [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) from [<c008f65c>] (__enable_irq+0x4c/0x88)
[ 0.900000] [<c008f65c>] (__enable_irq+0x4c/0x88) from [<c008fca0>] (enable_irq+0x54/0x98)
[ 0.900000] [<c008fca0>] (enable_irq+0x54/0x98) from [<c021e618>] (wait_op_done+0x40/0x134)
[ 0.900000] [<c021e618>] (wait_op_done+0x40/0x134) from [<c021e808>] (send_cmd+0x30/0x38)
[ 0.900000] [<c021e808>] (send_cmd+0x30/0x38) from [<c021eb8c>] (mxc_nand_command+0x26c/0x328)
[ 0.900000] [<c021eb8c>] (mxc_nand_command+0x26c/0x328) from [<c021aa60>] (nand_scan_ident+0x188/0x6c0)
[ 0.900000] [<c021aa60>] (nand_scan_ident+0x188/0x6c0) from [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0)
[ 0.900000] [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) from [<c01f9e88>] (platform_drv_probe+0x20/0x24)
[ 0.900000] [<c01f9e88>] (platform_drv_probe+0x20/0x24) from [<c01f8c38>] (driver_probe_device+0xb0/0x164)
[ 0.900000] [<c01f8c38>] (driver_probe_device+0xb0/0x164) from [<c01f8d54>] (__driver_attach+0x68/0x8c)
[ 0.900000] [<c01f8d54>] (__driver_attach+0x68/0x8c) from [<c01f8348>] (bus_for_each_dev+0x50/0x84)
[ 0.900000] [<c01f8348>] (bus_for_each_dev+0x50/0x84) from [<c01f8a9c>] (driver_attach+0x20/0x28)
[ 0.900000] [<c01f8a9c>] (driver_attach+0x20/0x28) from [<c01f7c00>] (bus_add_driver+0x144/0x2dc)
[ 0.900000] [<c01f7c00>] (bus_add_driver+0x144/0x2dc) from [<c01f906c>] (driver_register+0xb0/0x13c)
[ 0.900000] [<c01f906c>] (driver_register+0xb0/0x13c) from [<c01fa13c>] (platform_driver_register+0x4c/0x60)
[ 0.900000] [<c01fa13c>] (platform_driver_register+0x4c/0x60) from [<c01fa170>] (platform_driver_probe+0x20/0xa0)
[ 0.900000] [<c01fa170>] (platform_driver_probe+0x20/0xa0) from [<c001a708>] (mxc_nd_init+0x18/0x24)
[ 0.900000] [<c001a708>] (mxc_nd_init+0x18/0x24) from [<c002938c>] (do_one_initcall+0x64/0x1bc)
[ 0.900000] [<c002938c>] (do_one_initcall+0x64/0x1bc) from [<c00084c4>] (kernel_init+0xe8/0x1ac)
[ 0.900000] [<c00084c4>] (kernel_init+0xe8/0x1ac) from [<c002aee8>] (kernel_thread_exit+0x0/0x8)
[ 0.900000] ---[ end trace 8bf72ac6ba089a19 ]---
[ 1.140000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 68a7d37fd17c4..b464f6b23d0dd 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -604,8 +604,8 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/* Command pre-processing step */
switch (command) {
case NAND_CMD_RESET:
- send_cmd(host, command, false);
preset(mtd);
+ send_cmd(host, command, false);
break;
case NAND_CMD_STATUS:
--
GitLab
From 78d1022439e501bc4a1a32bfaad5a321b8a9d5d6 Mon Sep 17 00:00:00 2001
From: Conke Hu <conke@maxwit.com>
Date: Tue, 13 Jul 2010 12:56:30 +0800
Subject: [PATCH 198/863] mtd: s3c nand: parsing command-line partitions prior
to set->partitions
Current driver prevents command-line partitions from being parsed when built-in
partitions are defined in s3c2410_nand_set object, but it is not desirable in some
cases. This patch tries to parse commad-line partitions prior to the built-in.
Signed-off-by: Conke Hu <conke@maxwit.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/s3c2410.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 239aadfd01b02..33d832dddfdd1 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -727,15 +727,12 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
if (set == NULL)
return add_mtd_device(&mtd->mtd);
- if (set->nr_partitions == 0) {
- mtd->mtd.name = set->name;
- nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
- &part_info, 0);
- } else {
- if (set->nr_partitions > 0 && set->partitions != NULL) {
- nr_part = set->nr_partitions;
- part_info = set->partitions;
- }
+ mtd->mtd.name = set->name;
+ nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0);
+
+ if (nr_part <= 0 && set->nr_partitions > 0) {
+ nr_part = set->nr_partitions;
+ part_info = set->partitions;
}
if (nr_part > 0 && part_info)
--
GitLab
From c7b28e25cb9beb943aead770ff14551b55fa8c79 Mon Sep 17 00:00:00 2001
From: Brian Norris <norris@broadcom.com>
Date: Tue, 13 Jul 2010 15:13:00 -0700
Subject: [PATCH 199/863] mtd: nand: refactor BB marker detection
Some level of support for various scanning locations was already built in,
but this required clean-up. First, BB marker location cannot be determined
_only_ by the page size. Instead, I implemented some heuristic detection
based on data sheets from various manufacturers (all found in
nand_base.c:nand_get_flash_type()).
Second, once these options were identified, they were not handled properly
by nand_bbt.c:nand_default_bbt(). I updated the static nand_bbt_desc structs
to reflect the need for more combinations of detection. The memory allocation
here probably needs to be done dynamically in the very near future (see next
patches).
Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/nand_base.c | 24 +++++++++++++++----
drivers/mtd/nand/nand_bbt.c | 45 ++++++++++++++++++++++++++++++------
2 files changed, 58 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e6cf9aefef133..bd697909db53a 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2920,9 +2920,14 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 32 - 1;
/* Set the bad block position */
- chip->badblockpos = mtd->writesize > 512 ?
- NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
- chip->badblockbits = 8;
+ if (!(busw & NAND_BUSWIDTH_16) && (*maf_id == NAND_MFR_STMICRO ||
+ (*maf_id == NAND_MFR_SAMSUNG &&
+ mtd->writesize == 512) ||
+ *maf_id == NAND_MFR_AMD))
+ chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+ else
+ chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+
/* Get chip options, preserve non chip based options */
chip->options &= ~NAND_CHIPOPTIONS_MSK;
@@ -2941,12 +2946,23 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/*
* Bad block marker is stored in the last page of each block
- * on Samsung and Hynix MLC devices
+ * on Samsung and Hynix MLC devices; stored in first two pages
+ * of each block on Micron devices with 2KiB pages and on
+ * SLC Samsung, Hynix, and AMD/Spansion. All others scan only
+ * the first page.
*/
if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX))
chip->options |= NAND_BBT_SCANLASTPAGE;
+ else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ (*maf_id == NAND_MFR_SAMSUNG ||
+ *maf_id == NAND_MFR_HYNIX ||
+ *maf_id == NAND_MFR_AMD)) ||
+ (mtd->writesize == 2048 &&
+ *maf_id == NAND_MFR_MICRON))
+ chip->options |= NAND_BBT_SCAN2NDPAGE;
+
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 71d83be24ff67..ec1700eaf198d 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -1093,29 +1093,50 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr smallpage_memorybased = {
- .options = NAND_BBT_SCAN2NDPAGE,
- .offs = 5,
+ .options = 0,
+ .offs = NAND_SMALL_BADBLOCK_POS,
.len = 1,
.pattern = scan_ff_pattern
};
+static struct nand_bbt_descr smallpage_scan2nd_memorybased = {
+ .options = NAND_BBT_SCAN2NDPAGE,
+ .offs = NAND_SMALL_BADBLOCK_POS,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
static struct nand_bbt_descr largepage_memorybased = {
.options = 0,
- .offs = 0,
+ .offs = NAND_LARGE_BADBLOCK_POS,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
+static struct nand_bbt_descr largepage_scan2nd_memorybased = {
+ .options = NAND_BBT_SCAN2NDPAGE,
+ .offs = NAND_LARGE_BADBLOCK_POS,
.len = 2,
.pattern = scan_ff_pattern
};
+static struct nand_bbt_descr lastpage_memorybased = {
+ .options = NAND_BBT_SCANLASTPAGE,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
static struct nand_bbt_descr smallpage_flashbased = {
.options = NAND_BBT_SCAN2NDPAGE,
- .offs = 5,
+ .offs = NAND_SMALL_BADBLOCK_POS,
.len = 1,
.pattern = scan_ff_pattern
};
static struct nand_bbt_descr largepage_flashbased = {
.options = NAND_BBT_SCAN2NDPAGE,
- .offs = 0,
+ .offs = NAND_LARGE_BADBLOCK_POS,
.len = 2,
.pattern = scan_ff_pattern
};
@@ -1197,8 +1218,18 @@ int nand_default_bbt(struct mtd_info *mtd)
this->bbt_td = NULL;
this->bbt_md = NULL;
if (!this->badblock_pattern) {
- this->badblock_pattern = (mtd->writesize > 512) ?
- &largepage_memorybased : &smallpage_memorybased;
+ if (this->options & NAND_BBT_SCANLASTPAGE)
+ this->badblock_pattern = &lastpage_memorybased;
+ else if (this->options & NAND_BBT_SCAN2NDPAGE)
+ this->badblock_pattern = this->badblockpos ==
+ NAND_SMALL_BADBLOCK_POS ?
+ &smallpage_scan2nd_memorybased :
+ &largepage_scan2nd_memorybased;
+ else
+ this->badblock_pattern = this->badblockpos ==
+ NAND_SMALL_BADBLOCK_POS ?
+ &smallpage_memorybased :
+ &largepage_memorybased;
}
}
return nand_scan_bbt(mtd, this->badblock_pattern);
--
GitLab
From 58373ff0afff4cc8ac40608872995f4d87eb72ec Mon Sep 17 00:00:00 2001
From: Brian Norris <norris@broadcom.com>
Date: Thu, 15 Jul 2010 12:15:44 -0700
Subject: [PATCH 200/863] mtd: nand: more BB Detection refactoring and dynamic
scan options
This is a revision to PATCH 2/2 that I sent. Link:
http://lists.infradead.org/pipermail/linux-mtd/2010-July/030911.html
Added new flag for scanning of both bytes 1 and 6 of the OOB for
a BB marker (instead of simply one or the other).
The "check_pattern" and "check_short_pattern" functions were updated
to include support for scanning the two different locations in the OOB.
In order to handle increases in variety of necessary scanning patterns,
I implemented dynamic memory allocation of nand_bbt_descr structs
in new function 'nand_create_default_bbt_descr()'. This replaces
some increasingly-unwieldy, statically-declared descriptors. It can
replace several more (e.g. "flashbased" structs). However, I do not
test the flashbased options personally.
How this was tested:
I referenced 30+ data sheets (covering 100+ parts), and I tested a
selection of 10 different chips to varying degrees. Particularly, I
tested the creation of bad-block descriptors and basic BB scanning on
three parts:
ST NAND04GW3B2D, 2K page
ST NAND128W3A, 512B page
Samsung K9F1G08U0A, 2K page
To test these, I wrote some fake bad block markers to the flash (in OOB
bytes 1, 6, and elsewhere) to see if the scanning routine would detect
them properly. However, this method was somewhat limited because the
driver I am using has some bugs in its OOB write functionality.
Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/nand_base.c | 14 ++++
drivers/mtd/nand/nand_bbt.c | 127 ++++++++++++++++++++---------------
include/linux/mtd/bbm.h | 4 ++
3 files changed, 90 insertions(+), 55 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index bd697909db53a..c2901bd126f9b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2963,6 +2963,15 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
*maf_id == NAND_MFR_MICRON))
chip->options |= NAND_BBT_SCAN2NDPAGE;
+ /*
+ * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
+ */
+ if (!(busw & NAND_BUSWIDTH_16) &&
+ *maf_id == NAND_MFR_STMICRO &&
+ mtd->writesize == 2048) {
+ chip->options |= NAND_BBT_SCANBYTE1AND6;
+ chip->badblockpos = 0;
+ }
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
@@ -3322,6 +3331,11 @@ void nand_release(struct mtd_info *mtd)
kfree(chip->bbt);
if (!(chip->options & NAND_OWN_BUFFERS))
kfree(chip->buffers);
+
+ /* Free bad block descriptor memory */
+ if (chip->badblock_pattern && chip->badblock_pattern->options
+ & NAND_BBT_DYNAMICSTRUCT)
+ kfree(chip->badblock_pattern);
}
EXPORT_SYMBOL_GPL(nand_lock);
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ec1700eaf198d..469de17107e5f 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -93,6 +93,28 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc
return -1;
}
+ /* Check both positions 1 and 6 for pattern? */
+ if (td->options & NAND_BBT_SCANBYTE1AND6) {
+ if (td->options & NAND_BBT_SCANEMPTY) {
+ p += td->len;
+ end += NAND_SMALL_BADBLOCK_POS - td->offs;
+ /* Check region between positions 1 and 6 */
+ for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
+ i++) {
+ if (*p++ != 0xff)
+ return -1;
+ }
+ }
+ else {
+ p += NAND_SMALL_BADBLOCK_POS - td->offs;
+ }
+ /* Compare the pattern */
+ for (i = 0; i < td->len; i++) {
+ if (p[i] != td->pattern[i])
+ return -1;
+ }
+ }
+
if (td->options & NAND_BBT_SCANEMPTY) {
p += td->len;
end += td->len;
@@ -124,6 +146,13 @@ static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
if (p[td->offs + i] != td->pattern[i])
return -1;
}
+ /* Need to check location 1 AND 6? */
+ if (td->options & NAND_BBT_SCANBYTE1AND6) {
+ for (i = 0; i < td->len; i++) {
+ if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
+ return -1;
+ }
+ }
return 0;
}
@@ -397,12 +426,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
if (bd->options & NAND_BBT_SCANALLPAGES)
len = 1 << (this->bbt_erase_shift - this->page_shift);
- else {
- if (bd->options & NAND_BBT_SCAN2NDPAGE)
- len = 2;
- else
- len = 1;
- }
+ else if (bd->options & NAND_BBT_SCAN2NDPAGE)
+ len = 2;
+ else
+ len = 1;
if (!(bd->options & NAND_BBT_SCANEMPTY)) {
/* We need only read few bytes from the OOB area */
@@ -1092,41 +1119,6 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
* while scanning a device for factory marked good / bad blocks. */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-static struct nand_bbt_descr smallpage_memorybased = {
- .options = 0,
- .offs = NAND_SMALL_BADBLOCK_POS,
- .len = 1,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr smallpage_scan2nd_memorybased = {
- .options = NAND_BBT_SCAN2NDPAGE,
- .offs = NAND_SMALL_BADBLOCK_POS,
- .len = 2,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr largepage_memorybased = {
- .options = 0,
- .offs = NAND_LARGE_BADBLOCK_POS,
- .len = 1,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr largepage_scan2nd_memorybased = {
- .options = NAND_BBT_SCAN2NDPAGE,
- .offs = NAND_LARGE_BADBLOCK_POS,
- .len = 2,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr lastpage_memorybased = {
- .options = NAND_BBT_SCANLASTPAGE,
- .offs = 0,
- .len = 1,
- .pattern = scan_ff_pattern
-};
-
static struct nand_bbt_descr smallpage_flashbased = {
.options = NAND_BBT_SCAN2NDPAGE,
.offs = NAND_SMALL_BADBLOCK_POS,
@@ -1175,6 +1167,43 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern
};
+#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
+ NAND_BBT_SCANBYTE1AND6)
+/**
+ * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
+ *
+ * This function allocates and initializes a nand_bbt_descr for BBM detection
+ * based on the properties of "this". The new descriptor is stored in
+ * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
+ * passed to this function.
+ *
+ * TODO: Handle other flags, replace other static structs
+ * (e.g. handle NAND_BBT_FLASH for flash-based BBT,
+ * replace smallpage_flashbased)
+ *
+ */
+static int nand_create_default_bbt_descr(struct nand_chip *this)
+{
+ struct nand_bbt_descr *bd;
+ if (this->badblock_pattern) {
+ printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+ return -EINVAL;
+ }
+ bd = kzalloc(sizeof(*bd), GFP_KERNEL);
+ if (!bd) {
+ printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+ return -ENOMEM;
+ }
+ bd->options = this->options & BBT_SCAN_OPTIONS;
+ bd->offs = this->badblockpos;
+ bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
+ bd->pattern = scan_ff_pattern;
+ bd->options |= NAND_BBT_DYNAMICSTRUCT;
+ this->badblock_pattern = bd;
+ return 0;
+}
+
/**
* nand_default_bbt - [NAND Interface] Select a default bad block table for the device
* @mtd: MTD device structure
@@ -1217,20 +1246,8 @@ int nand_default_bbt(struct mtd_info *mtd)
} else {
this->bbt_td = NULL;
this->bbt_md = NULL;
- if (!this->badblock_pattern) {
- if (this->options & NAND_BBT_SCANLASTPAGE)
- this->badblock_pattern = &lastpage_memorybased;
- else if (this->options & NAND_BBT_SCAN2NDPAGE)
- this->badblock_pattern = this->badblockpos ==
- NAND_SMALL_BADBLOCK_POS ?
- &smallpage_scan2nd_memorybased :
- &largepage_scan2nd_memorybased;
- else
- this->badblock_pattern = this->badblockpos ==
- NAND_SMALL_BADBLOCK_POS ?
- &smallpage_memorybased :
- &largepage_memorybased;
- }
+ if (!this->badblock_pattern)
+ nand_create_default_bbt_descr(this);
}
return nand_scan_bbt(mtd, this->badblock_pattern);
}
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 8ad0b8629c3f8..a04b962492a8b 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -84,6 +84,10 @@ struct nand_bbt_descr {
#define NAND_BBT_SCAN2NDPAGE 0x00004000
/* Search good / bad pattern on the last page of the eraseblock */
#define NAND_BBT_SCANLASTPAGE 0x00008000
+/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
+#define NAND_BBT_SCANBYTE1AND6 0x00100000
+/* The nand_bbt_descr was created dynamicaly and must be freed */
+#define NAND_BBT_DYNAMICSTRUCT 0x00200000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
--
GitLab
From 1c3275b656045aff9a75bb2c9f3251af1043ebb3 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 20 Jul 2010 15:24:01 -0700
Subject: [PATCH 201/863] mtd: nand: davinci: correct 4-bit error correction
On TI's DA830/OMAP-L137, DA850/OMAP-L138 and DM365, after setting the
4BITECC_ADD_CALC_START bit in the NAND Flash control register to 1 and
before waiting for the NAND Flash status register to be equal to 1, 2 or
3, we have to wait till the ECC HW goes to correction state. Without this
wait, ECC correction calculations will not be proper.
This has been tested on DA830/OMAP-L137, DA850/OMAP-L138, DM355 and DM365
EVMs.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Sneha Narnakaje <nsnehaprabha@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/davinci_nand.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 9c9d893affeb4..2ac7367afe77c 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -311,7 +311,9 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd,
unsigned short ecc10[8];
unsigned short *ecc16;
u32 syndrome[4];
+ u32 ecc_state;
unsigned num_errors, corrected;
+ unsigned long timeo = jiffies + msecs_to_jiffies(100);
/* All bytes 0xff? It's an erased page; ignore its ECC. */
for (i = 0; i < 10; i++) {
@@ -361,6 +363,21 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd,
*/
davinci_nand_writel(info, NANDFCR_OFFSET,
davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+
+ /*
+ * ECC_STATE field reads 0x3 (Error correction complete) immediately
+ * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
+ * begin trying to poll for the state, you may fall right out of your
+ * loop without any of the correction calculations having taken place.
+ * The recommendation from the hardware team is to wait till ECC_STATE
+ * reads less than 4, which means ECC HW has entered correction state.
+ */
+ do {
+ ecc_state = (davinci_nand_readl(info,
+ NANDFSR_OFFSET) >> 8) & 0x0f;
+ cpu_relax();
+ } while ((ecc_state < 4) && time_before(jiffies, timeo));
+
for (;;) {
u32 fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
--
GitLab
From 6ea9ad24186d1242320bf02082e02c8c5a8073be Mon Sep 17 00:00:00 2001
From: "Dong, Chuanxiao" <chuanxiao.dong@intel.com>
Date: Thu, 22 Jul 2010 01:32:26 +0800
Subject: [PATCH 202/863] mtd: denali.h: fixed checkpatch errors
Fix all checkpatch.pl complaints.
Artem: tweaked a little and fix tab indentations, so now this is not
only about checkpatch, but also about making indentations look
sane.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.h | 160 +++++++++++++++++++-------------------
1 file changed, 78 insertions(+), 82 deletions(-)
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 422a29ab2f60f..b56fa3c7c1667 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -17,7 +17,7 @@
*
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/nand.h>
#define DEVICE_RESET 0x0
#define DEVICE_RESET__BANK0 0x0001
@@ -29,7 +29,7 @@
#define TRANSFER_SPARE_REG__FLAG 0x0001
#define LOAD_WAIT_CNT 0x20
-#define LOAD_WAIT_CNT__VALUE 0xffff
+#define LOAD_WAIT_CNT__VALUE 0xffff
#define PROGRAM_WAIT_CNT 0x30
#define PROGRAM_WAIT_CNT__VALUE 0xffff
@@ -83,7 +83,7 @@
#define RE_2_WE 0x120
#define RE_2_WE__VALUE 0x003f
-#define ACC_CLKS 0x130
+#define ACC_CLKS 0x130
#define ACC_CLKS__VALUE 0x000f
#define NUMBER_OF_PLANES 0x140
@@ -140,7 +140,7 @@
#define DEVICES_CONNECTED 0x250
#define DEVICES_CONNECTED__VALUE 0x0007
-#define DIE_MASK 0x260
+#define DIE_MASK 0x260
#define DIE_MASK__VALUE 0x00ff
#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
@@ -152,7 +152,7 @@
#define RE_2_RE 0x290
#define RE_2_RE__VALUE 0x003f
-#define MANUFACTURER_ID 0x300
+#define MANUFACTURER_ID 0x300
#define MANUFACTURER_ID__VALUE 0x00ff
#define DEVICE_ID 0x310
@@ -173,13 +173,13 @@
#define LOGICAL_PAGE_SPARE_SIZE 0x360
#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff
-#define REVISION 0x370
+#define REVISION 0x370
#define REVISION__VALUE 0xffff
#define ONFI_DEVICE_FEATURES 0x380
#define ONFI_DEVICE_FEATURES__VALUE 0x003f
-#define ONFI_OPTIONAL_COMMANDS 0x390
+#define ONFI_OPTIONAL_COMMANDS 0x390
#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f
#define ONFI_TIMING_MODE 0x3a0
@@ -201,12 +201,12 @@
#define FEATURES 0x3f0
#define FEATURES__N_BANKS 0x0003
#define FEATURES__ECC_MAX_ERR 0x003c
-#define FEATURES__DMA 0x0040
+#define FEATURES__DMA 0x0040
#define FEATURES__CMD_DMA 0x0080
#define FEATURES__PARTITION 0x0100
#define FEATURES__XDMA_SIDEBAND 0x0200
#define FEATURES__GPREG 0x0400
-#define FEATURES__INDEX_ADDR 0x0800
+#define FEATURES__INDEX_ADDR 0x0800
#define TRANSFER_MODE 0x400
#define TRANSFER_MODE__VALUE 0x0003
@@ -235,12 +235,12 @@
#define INTR_EN0__DMA_CMD_COMP 0x0004
#define INTR_EN0__TIME_OUT 0x0008
#define INTR_EN0__PROGRAM_FAIL 0x0010
-#define INTR_EN0__ERASE_FAIL 0x0020
+#define INTR_EN0__ERASE_FAIL 0x0020
#define INTR_EN0__LOAD_COMP 0x0040
#define INTR_EN0__PROGRAM_COMP 0x0080
-#define INTR_EN0__ERASE_COMP 0x0100
+#define INTR_EN0__ERASE_COMP 0x0100
#define INTR_EN0__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN0__LOCKED_BLK 0x0400
+#define INTR_EN0__LOCKED_BLK 0x0400
#define INTR_EN0__UNSUP_CMD 0x0800
#define INTR_EN0__INT_ACT 0x1000
#define INTR_EN0__RST_COMP 0x2000
@@ -253,7 +253,7 @@
#define ERR_PAGE_ADDR0 0x440
#define ERR_PAGE_ADDR0__VALUE 0xffff
-#define ERR_BLOCK_ADDR0 0x450
+#define ERR_BLOCK_ADDR0 0x450
#define ERR_BLOCK_ADDR0__VALUE 0xffff
#define INTR_STATUS1 0x460
@@ -280,12 +280,12 @@
#define INTR_EN1__DMA_CMD_COMP 0x0004
#define INTR_EN1__TIME_OUT 0x0008
#define INTR_EN1__PROGRAM_FAIL 0x0010
-#define INTR_EN1__ERASE_FAIL 0x0020
+#define INTR_EN1__ERASE_FAIL 0x0020
#define INTR_EN1__LOAD_COMP 0x0040
#define INTR_EN1__PROGRAM_COMP 0x0080
-#define INTR_EN1__ERASE_COMP 0x0100
+#define INTR_EN1__ERASE_COMP 0x0100
#define INTR_EN1__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN1__LOCKED_BLK 0x0400
+#define INTR_EN1__LOCKED_BLK 0x0400
#define INTR_EN1__UNSUP_CMD 0x0800
#define INTR_EN1__INT_ACT 0x1000
#define INTR_EN1__RST_COMP 0x2000
@@ -298,7 +298,7 @@
#define ERR_PAGE_ADDR1 0x490
#define ERR_PAGE_ADDR1__VALUE 0xffff
-#define ERR_BLOCK_ADDR1 0x4a0
+#define ERR_BLOCK_ADDR1 0x4a0
#define ERR_BLOCK_ADDR1__VALUE 0xffff
#define INTR_STATUS2 0x4b0
@@ -325,12 +325,12 @@
#define INTR_EN2__DMA_CMD_COMP 0x0004
#define INTR_EN2__TIME_OUT 0x0008
#define INTR_EN2__PROGRAM_FAIL 0x0010
-#define INTR_EN2__ERASE_FAIL 0x0020
+#define INTR_EN2__ERASE_FAIL 0x0020
#define INTR_EN2__LOAD_COMP 0x0040
#define INTR_EN2__PROGRAM_COMP 0x0080
-#define INTR_EN2__ERASE_COMP 0x0100
+#define INTR_EN2__ERASE_COMP 0x0100
#define INTR_EN2__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN2__LOCKED_BLK 0x0400
+#define INTR_EN2__LOCKED_BLK 0x0400
#define INTR_EN2__UNSUP_CMD 0x0800
#define INTR_EN2__INT_ACT 0x1000
#define INTR_EN2__RST_COMP 0x2000
@@ -343,7 +343,7 @@
#define ERR_PAGE_ADDR2 0x4e0
#define ERR_PAGE_ADDR2__VALUE 0xffff
-#define ERR_BLOCK_ADDR2 0x4f0
+#define ERR_BLOCK_ADDR2 0x4f0
#define ERR_BLOCK_ADDR2__VALUE 0xffff
#define INTR_STATUS3 0x500
@@ -370,12 +370,12 @@
#define INTR_EN3__DMA_CMD_COMP 0x0004
#define INTR_EN3__TIME_OUT 0x0008
#define INTR_EN3__PROGRAM_FAIL 0x0010
-#define INTR_EN3__ERASE_FAIL 0x0020
+#define INTR_EN3__ERASE_FAIL 0x0020
#define INTR_EN3__LOAD_COMP 0x0040
#define INTR_EN3__PROGRAM_COMP 0x0080
-#define INTR_EN3__ERASE_COMP 0x0100
+#define INTR_EN3__ERASE_COMP 0x0100
#define INTR_EN3__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN3__LOCKED_BLK 0x0400
+#define INTR_EN3__LOCKED_BLK 0x0400
#define INTR_EN3__UNSUP_CMD 0x0800
#define INTR_EN3__INT_ACT 0x1000
#define INTR_EN3__RST_COMP 0x2000
@@ -388,7 +388,7 @@
#define ERR_PAGE_ADDR3 0x530
#define ERR_PAGE_ADDR3__VALUE 0xffff
-#define ERR_BLOCK_ADDR3 0x540
+#define ERR_BLOCK_ADDR3 0x540
#define ERR_BLOCK_ADDR3__VALUE 0xffff
#define DATA_INTR 0x550
@@ -412,9 +412,9 @@
#define GPREG_3__VALUE 0xffff
#define ECC_THRESHOLD 0x600
-#define ECC_THRESHOLD__VALUE 0x03ff
+#define ECC_THRESHOLD__VALUE 0x03ff
-#define ECC_ERROR_BLOCK_ADDRESS 0x610
+#define ECC_ERROR_BLOCK_ADDRESS 0x610
#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff
#define ECC_ERROR_PAGE_ADDRESS 0x620
@@ -466,7 +466,7 @@
#define CHNL_ACTIVE__CHANNEL3 0x0008
#define ACTIVE_SRC_ID 0x800
-#define ACTIVE_SRC_ID__VALUE 0x00ff
+#define ACTIVE_SRC_ID__VALUE 0x00ff
#define PTN_INTR 0x810
#define PTN_INTR__CONFIG_ERROR 0x0001
@@ -485,7 +485,7 @@
#define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020
#define PERM_SRC_ID_0 0x830
-#define PERM_SRC_ID_0__SRCID 0x00ff
+#define PERM_SRC_ID_0__SRCID 0x00ff
#define PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_0__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_0__READ_ACTIVE 0x4000
@@ -502,7 +502,7 @@
#define MIN_MAX_BANK_0__MAX_VALUE 0x000c
#define PERM_SRC_ID_1 0x870
-#define PERM_SRC_ID_1__SRCID 0x00ff
+#define PERM_SRC_ID_1__SRCID 0x00ff
#define PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_1__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_1__READ_ACTIVE 0x4000
@@ -519,7 +519,7 @@
#define MIN_MAX_BANK_1__MAX_VALUE 0x000c
#define PERM_SRC_ID_2 0x8b0
-#define PERM_SRC_ID_2__SRCID 0x00ff
+#define PERM_SRC_ID_2__SRCID 0x00ff
#define PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_2__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_2__READ_ACTIVE 0x4000
@@ -536,7 +536,7 @@
#define MIN_MAX_BANK_2__MAX_VALUE 0x000c
#define PERM_SRC_ID_3 0x8f0
-#define PERM_SRC_ID_3__SRCID 0x00ff
+#define PERM_SRC_ID_3__SRCID 0x00ff
#define PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_3__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_3__READ_ACTIVE 0x4000
@@ -553,7 +553,7 @@
#define MIN_MAX_BANK_3__MAX_VALUE 0x000c
#define PERM_SRC_ID_4 0x930
-#define PERM_SRC_ID_4__SRCID 0x00ff
+#define PERM_SRC_ID_4__SRCID 0x00ff
#define PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_4__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_4__READ_ACTIVE 0x4000
@@ -570,7 +570,7 @@
#define MIN_MAX_BANK_4__MAX_VALUE 0x000c
#define PERM_SRC_ID_5 0x970
-#define PERM_SRC_ID_5__SRCID 0x00ff
+#define PERM_SRC_ID_5__SRCID 0x00ff
#define PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_5__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_5__READ_ACTIVE 0x4000
@@ -587,7 +587,7 @@
#define MIN_MAX_BANK_5__MAX_VALUE 0x000c
#define PERM_SRC_ID_6 0x9b0
-#define PERM_SRC_ID_6__SRCID 0x00ff
+#define PERM_SRC_ID_6__SRCID 0x00ff
#define PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_6__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_6__READ_ACTIVE 0x4000
@@ -604,7 +604,7 @@
#define MIN_MAX_BANK_6__MAX_VALUE 0x000c
#define PERM_SRC_ID_7 0x9f0
-#define PERM_SRC_ID_7__SRCID 0x00ff
+#define PERM_SRC_ID_7__SRCID 0x00ff
#define PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_7__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_7__READ_ACTIVE 0x4000
@@ -622,43 +622,40 @@
/* flash.h */
struct device_info_tag {
- uint16_t wDeviceMaker;
- uint16_t wDeviceID;
+ uint16_t wDeviceMaker;
+ uint16_t wDeviceID;
uint8_t bDeviceParam0;
uint8_t bDeviceParam1;
uint8_t bDeviceParam2;
- uint32_t wDeviceType;
- uint32_t wSpectraStartBlock;
- uint32_t wSpectraEndBlock;
- uint32_t wTotalBlocks;
- uint16_t wPagesPerBlock;
- uint16_t wPageSize;
- uint16_t wPageDataSize;
- uint16_t wPageSpareSize;
- uint16_t wNumPageSpareFlag;
- uint16_t wECCBytesPerSector;
- uint32_t wBlockSize;
- uint32_t wBlockDataSize;
- uint32_t wDataBlockNum;
- uint8_t bPlaneNum;
- uint16_t wDeviceMainAreaSize;
- uint16_t wDeviceSpareAreaSize;
- uint16_t wDevicesConnected;
- uint16_t wDeviceWidth;
- uint16_t wHWRevision;
- uint16_t wHWFeatures;
-
- uint16_t wONFIDevFeatures;
- uint16_t wONFIOptCommands;
- uint16_t wONFITimingMode;
- uint16_t wONFIPgmCacheTimingMode;
-
- uint16_t MLCDevice;
- uint16_t wSpareSkipBytes;
-
- uint8_t nBitsInPageNumber;
- uint8_t nBitsInPageDataSize;
- uint8_t nBitsInBlockDataSize;
+ uint32_t wDeviceType;
+ uint32_t wSpectraStartBlock;
+ uint32_t wSpectraEndBlock;
+ uint32_t wTotalBlocks;
+ uint16_t wPagesPerBlock;
+ uint16_t wPageSize;
+ uint16_t wPageDataSize;
+ uint16_t wPageSpareSize;
+ uint16_t wNumPageSpareFlag;
+ uint16_t wECCBytesPerSector;
+ uint32_t wBlockSize;
+ uint32_t wBlockDataSize;
+ uint32_t wDataBlockNum;
+ uint8_t bPlaneNum;
+ uint16_t wDeviceMainAreaSize;
+ uint16_t wDeviceSpareAreaSize;
+ uint16_t wDevicesConnected;
+ uint16_t wDeviceWidth;
+ uint16_t wHWRevision;
+ uint16_t wHWFeatures;
+ uint16_t wONFIDevFeatures;
+ uint16_t wONFIOptCommands;
+ uint16_t wONFITimingMode;
+ uint16_t wONFIPgmCacheTimingMode;
+ uint16_t MLCDevice;
+ uint16_t wSpareSkipBytes;
+ uint8_t nBitsInPageNumber;
+ uint8_t nBitsInPageDataSize;
+ uint8_t nBitsInBlockDataSize;
};
/* ffsdefs.h */
@@ -684,11 +681,11 @@ struct device_info_tag {
#define NAND_DBG_TRACE 3
#ifdef VERBOSE
-#define nand_dbg_print(level, args...) \
- do { \
- if (level <= nand_debug_level) \
- printk(KERN_ALERT args); \
- } while (0)
+#define nand_dbg_print(level, args...) \
+ do { \
+ if (level <= nand_debug_level) \
+ printk(KERN_ALERT args); \
+ } while (0)
#else
#define nand_dbg_print(level, args...)
#endif
@@ -772,10 +769,9 @@ struct device_info_tag {
#define ECC_SECTOR_SIZE 512
#define LLD_MAX_FLASH_BANKS 4
-#define DENALI_BUF_SIZE NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE
+#define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
-struct nand_buf
-{
+struct nand_buf {
int head;
int tail;
uint8_t buf[DENALI_BUF_SIZE];
@@ -808,9 +804,9 @@ struct denali_nand_info {
int idx;
};
-static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali);
-static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali);
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, uint16_t INT_ENABLE);
+static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali);
+static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali);
+static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
+ uint16_t INT_ENABLE);
#endif /*_LLD_NAND_*/
-
--
GitLab
From 02ed70bb7b2644936959aee617296022dedb109e Mon Sep 17 00:00:00 2001
From: Brian Norris <norris@broadcom.com>
Date: Wed, 21 Jul 2010 16:53:47 -0700
Subject: [PATCH 203/863] mtd: nand: update nand_default_block_markbad()
This is an update that depends on the previous patches I sent.
We can now write to all the appropriate BB marker locations (i.e.
pages 1 AND 2, bytes 1 AND 6) with nand_default_block_markbad() if
necessary, according to the flags marked in chip->options.
Note that I removed the line:
ofs += mtd->oobsize;
Unless I am wrong, this line was completely unnecessary in the
first place.
Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/nand_base.c | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index c2901bd126f9b..ee6a6f866b502 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -397,7 +397,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
struct nand_chip *chip = mtd->priv;
uint8_t buf[2] = { 0, 0 };
- int block, ret;
+ int block, ret, i = 0;
if (chip->options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
@@ -411,17 +411,31 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
if (chip->options & NAND_USE_FLASH_BBT)
ret = nand_update_bbt(mtd, ofs);
else {
- /* We write two bytes, so we dont have to mess with 16 bit
- * access
- */
nand_get_device(chip, mtd, FL_WRITING);
- ofs += mtd->oobsize;
- chip->ops.len = chip->ops.ooblen = 2;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = buf;
- chip->ops.ooboffs = chip->badblockpos & ~0x01;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ /* Write to first two pages and to byte 1 and 6 if necessary.
+ * If we write to more than one location, the first error
+ * encountered quits the procedure. We write two bytes per
+ * location, so we dont have to mess with 16 bit access.
+ */
+ do {
+ chip->ops.len = chip->ops.ooblen = 2;
+ chip->ops.datbuf = NULL;
+ chip->ops.oobbuf = buf;
+ chip->ops.ooboffs = chip->badblockpos & ~0x01;
+
+ ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+
+ if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
+ chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
+ & ~0x01;
+ ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ }
+ i++;
+ ofs += mtd->writesize;
+ } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+ i < 2);
+
nand_release_device(mtd);
}
if (!ret)
--
GitLab
From 42b0aab1cc30b2fa7e0a99b832bd1b5c9b59757d Mon Sep 17 00:00:00 2001
From: Rohit Hassan Sathyanarayan <rohit.hs@samsung.com>
Date: Fri, 23 Jul 2010 12:29:25 +0530
Subject: [PATCH 204/863] mtd: onenand:fix for page addr calculation based on
device type
Sending the patch for page address calculation based on device type. This resolves the
OneNAND DDP device read problem as pointed by Enric.
http://lists.infradead.org/pipermail/linux-mtd/2010-July/030920.html
Signed-off-by: Rohit HS <rohit.hs@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/onenand/onenand_base.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 26caf2590dae1..f749935f3cb53 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -377,8 +377,11 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
default:
block = onenand_block(this, addr);
- page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
-
+ if (FLEXONENAND(this))
+ page = (int) (addr - onenand_addr(this, block))>>\
+ this->page_shift;
+ else
+ page = (int) (addr >> this->page_shift);
if (ONENAND_IS_2PLANE(this)) {
/* Make the even block number */
block &= ~1;
--
GitLab
From 7957e9c4d175cc065f4277211fcb7d784fcee860 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 2 Aug 2010 19:33:51 -0700
Subject: [PATCH 205/863] Input: add static inline accessors for ABS properties
In preparation for dynamically allocated ABS axis, introduce a number of
static inline access helpers. This should make the transition less
painful.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
include/linux/input.h | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/include/linux/input.h b/include/linux/input.h
index 339d043ccb535..4a5531161de16 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1469,6 +1469,36 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min
dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
}
+#define INPUT_GENERATE_ABS_ACCESSORS(_suffix, _item) \
+static inline int input_abs_get_##_suffix(struct input_dev *dev, \
+ unsigned int axis) \
+{ \
+ return dev->abs##_item[axis]; \
+} \
+ \
+static inline void input_abs_set_##_suffix(struct input_dev *dev, \
+ unsigned int axis, int val) \
+{ \
+ dev->abs##_item[axis] = val; \
+}
+
+INPUT_GENERATE_ABS_ACCESSORS(min, min)
+INPUT_GENERATE_ABS_ACCESSORS(max, max)
+INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz)
+INPUT_GENERATE_ABS_ACCESSORS(flat, flat)
+INPUT_GENERATE_ABS_ACCESSORS(res, res)
+
+static inline int input_abs_get_val(struct input_dev *dev, unsigned int axis)
+{
+ return dev->abs[axis];
+}
+
+static inline void input_abs_set_val(struct input_dev *dev,
+ unsigned int axis, int val)
+{
+ dev->abs[axis] = val;
+}
+
int input_get_keycode(struct input_dev *dev,
unsigned int scancode, unsigned int *keycode);
int input_set_keycode(struct input_dev *dev,
--
GitLab
From 987a6c0298260b7aa40702b349282554d6180e4b Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 2 Aug 2010 20:15:17 -0700
Subject: [PATCH 206/863] Input: switch to input_abs_*() access functions
Change all call sites in drivers/input to not access the ABS axis
information directly anymore. Make them use the access helpers instead.
Also use input_set_abs_params() when possible.
Did some code refactoring as I was on it.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/hid/hid-wacom.c | 49 ++++++++++++++---------------
drivers/input/evdev.c | 26 +++++++--------
drivers/input/input.c | 4 +--
drivers/input/joydev.c | 31 +++++++++---------
drivers/input/joystick/a3d.c | 3 +-
drivers/input/joystick/adi.c | 2 +-
drivers/input/joystick/amijoy.c | 4 +--
drivers/input/joystick/gf2k.c | 20 ++++++------
drivers/input/joystick/interact.c | 14 +++------
drivers/input/joystick/sidewinder.c | 18 ++++++-----
drivers/input/keyboard/hil_kbd.c | 21 +++++++------
drivers/input/misc/uinput.c | 29 ++++++++++-------
drivers/input/mouse/pc110pad.c | 4 +--
drivers/input/mouse/synaptics.c | 4 +--
drivers/input/mousedev.c | 44 +++++++++++++++-----------
drivers/input/tablet/aiptek.c | 15 ++++-----
drivers/input/tablet/wacom_wac.c | 4 +--
17 files changed, 153 insertions(+), 139 deletions(-)
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 1e051f1171e4a..1c4b4ca19195e 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -230,7 +230,7 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
input_report_key(input, BTN_RIGHT, 0);
input_report_key(input, BTN_MIDDLE, 0);
input_report_abs(input, ABS_DISTANCE,
- input->absmax[ABS_DISTANCE]);
+ input_abs_get_max(input, ABS_DISTANCE));
} else {
input_report_key(input, BTN_TOUCH, 0);
input_report_key(input, BTN_STYLUS, 0);
@@ -383,38 +383,37 @@ static int wacom_probe(struct hid_device *hdev,
/* Basics */
input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
- input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) |
- BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE);
- input->relbit[0] |= BIT(REL_WHEEL);
- set_bit(BTN_TOOL_PEN, input->keybit);
- set_bit(BTN_TOUCH, input->keybit);
- set_bit(BTN_STYLUS, input->keybit);
- set_bit(BTN_STYLUS2, input->keybit);
- set_bit(BTN_LEFT, input->keybit);
- set_bit(BTN_RIGHT, input->keybit);
- set_bit(BTN_MIDDLE, input->keybit);
+
+ __set_bit(REL_WHEEL, input->relbit);
+
+ __set_bit(BTN_TOOL_PEN, input->keybit);
+ __set_bit(BTN_TOUCH, input->keybit);
+ __set_bit(BTN_STYLUS, input->keybit);
+ __set_bit(BTN_STYLUS2, input->keybit);
+ __set_bit(BTN_LEFT, input->keybit);
+ __set_bit(BTN_RIGHT, input->keybit);
+ __set_bit(BTN_MIDDLE, input->keybit);
/* Pad */
input->evbit[0] |= BIT(EV_MSC);
- input->mscbit[0] |= BIT(MSC_SERIAL);
- set_bit(BTN_0, input->keybit);
- set_bit(BTN_1, input->keybit);
- set_bit(BTN_TOOL_FINGER, input->keybit);
- /* Distance, rubber and mouse */
- input->absbit[0] |= BIT(ABS_DISTANCE);
- set_bit(BTN_TOOL_RUBBER, input->keybit);
- set_bit(BTN_TOOL_MOUSE, input->keybit);
+ __set_bit(MSC_SERIAL, input->mscbit);
- input->absmax[ABS_PRESSURE] = 511;
- input->absmax[ABS_DISTANCE] = 32;
+ __set_bit(BTN_0, input->keybit);
+ __set_bit(BTN_1, input->keybit);
+ __set_bit(BTN_TOOL_FINGER, input->keybit);
- input->absmax[ABS_X] = 16704;
- input->absmax[ABS_Y] = 12064;
- input->absfuzz[ABS_X] = 4;
- input->absfuzz[ABS_Y] = 4;
+ /* Distance, rubber and mouse */
+ __set_bit(BTN_TOOL_RUBBER, input->keybit);
+ __set_bit(BTN_TOOL_MOUSE, input->keybit);
+
+ input_set_abs_params(input, ABS_X, 0, 16704, 4, 0);
+ input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0);
+ input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
return 0;
+
err_free:
kfree(wdata);
return ret;
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 054edf346e0b5..9807c8ff6a847 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -650,12 +650,12 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
t = _IOC_NR(cmd) & ABS_MAX;
- abs.value = dev->abs[t];
- abs.minimum = dev->absmin[t];
- abs.maximum = dev->absmax[t];
- abs.fuzz = dev->absfuzz[t];
- abs.flat = dev->absflat[t];
- abs.resolution = dev->absres[t];
+ abs.value = input_abs_get_val(dev, t);
+ abs.minimum = input_abs_get_min(dev, t);
+ abs.maximum = input_abs_get_max(dev, t);
+ abs.fuzz = input_abs_get_fuzz(dev, t);
+ abs.flat = input_abs_get_flat(dev, t);
+ abs.resolution = input_abs_get_res(dev, t);
if (copy_to_user(p, &abs, min_t(size_t,
_IOC_SIZE(cmd),
@@ -702,13 +702,13 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
*/
spin_lock_irq(&dev->event_lock);
- dev->abs[t] = abs.value;
- dev->absmin[t] = abs.minimum;
- dev->absmax[t] = abs.maximum;
- dev->absfuzz[t] = abs.fuzz;
- dev->absflat[t] = abs.flat;
- dev->absres[t] = _IOC_SIZE(cmd) < sizeof(struct input_absinfo) ?
- 0 : abs.resolution;
+ input_abs_set_val(dev, t, abs.value);
+ input_abs_set_min(dev, t, abs.minimum);
+ input_abs_set_max(dev, t, abs.maximum);
+ input_abs_set_fuzz(dev, t, abs.fuzz);
+ input_abs_set_flat(dev, t, abs.flat);
+ input_abs_set_res(dev, t, _IOC_SIZE(cmd) < sizeof(struct input_absinfo) ?
+ 0 : abs.resolution);
spin_unlock_irq(&dev->event_lock);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index e1243b4b32a5b..7259adb8619dd 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -204,8 +204,8 @@ static int input_handle_abs_event(struct input_dev *dev,
}
/* Flush pending "slot" event */
- if (is_mt_event && dev->slot != dev->abs[ABS_MT_SLOT]) {
- dev->abs[ABS_MT_SLOT] = dev->slot;
+ if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) {
+ input_abs_set_val(dev, ABS_MT_SLOT, dev->slot);
input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
}
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 63834585c2835..d85bd8a7967d2 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -530,7 +530,7 @@ static int joydev_ioctl_common(struct joydev *joydev,
{
struct input_dev *dev = joydev->handle.dev;
size_t len;
- int i, j;
+ int i;
const char *name;
/* Process fixed-sized commands. */
@@ -562,12 +562,11 @@ static int joydev_ioctl_common(struct joydev *joydev,
case JSIOCSCORR:
if (copy_from_user(joydev->corr, argp,
sizeof(joydev->corr[0]) * joydev->nabs))
- return -EFAULT;
+ return -EFAULT;
for (i = 0; i < joydev->nabs; i++) {
- j = joydev->abspam[i];
- joydev->abs[i] = joydev_correct(dev->abs[j],
- &joydev->corr[i]);
+ int val = input_abs_get_val(dev, joydev->abspam[i]);
+ joydev->abs[i] = joydev_correct(val, &joydev->corr[i]);
}
return 0;
@@ -848,25 +847,27 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
for (i = 0; i < joydev->nabs; i++) {
j = joydev->abspam[i];
- if (dev->absmax[j] == dev->absmin[j]) {
+ if (input_abs_get_max(dev, j) == input_abs_get_min(dev, j)) {
joydev->corr[i].type = JS_CORR_NONE;
- joydev->abs[i] = dev->abs[j];
+ joydev->abs[i] = input_abs_get_val(dev, j);
continue;
}
joydev->corr[i].type = JS_CORR_BROKEN;
- joydev->corr[i].prec = dev->absfuzz[j];
- joydev->corr[i].coef[0] =
- (dev->absmax[j] + dev->absmin[j]) / 2 - dev->absflat[j];
- joydev->corr[i].coef[1] =
- (dev->absmax[j] + dev->absmin[j]) / 2 + dev->absflat[j];
+ joydev->corr[i].prec = input_abs_get_fuzz(dev, j);
+
+ t = (input_abs_get_max(dev, j) + input_abs_get_min(dev, j)) / 2;
+ joydev->corr[i].coef[0] = t - input_abs_get_flat(dev, j);
+ joydev->corr[i].coef[1] = t + input_abs_get_flat(dev, j);
- t = (dev->absmax[j] - dev->absmin[j]) / 2 - 2 * dev->absflat[j];
+ t = (input_abs_get_max(dev, j) - input_abs_get_min(dev, j)) / 2
+ - 2 * input_abs_get_flat(dev, j);
if (t) {
joydev->corr[i].coef[2] = (1 << 29) / t;
joydev->corr[i].coef[3] = (1 << 29) / t;
- joydev->abs[i] = joydev_correct(dev->abs[j],
- joydev->corr + i);
+ joydev->abs[i] =
+ joydev_correct(input_abs_get_val(dev, j),
+ joydev->corr + i);
}
}
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index 6489f4010c4f2..d259b41354b89 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -342,7 +342,8 @@ static int a3d_connect(struct gameport *gameport, struct gameport_driver *drv)
for (i = 0; i < 4; i++) {
if (i < 2)
- input_set_abs_params(input_dev, axes[i], 48, input_dev->abs[axes[i]] * 2 - 48, 0, 8);
+ input_set_abs_params(input_dev, axes[i],
+ 48, input_abs_get_val(input_dev, axes[i]) * 2 - 48, 0, 8);
else
input_set_abs_params(input_dev, axes[i], 2, 253, 0, 0);
input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index 89c4c084d4ad8..b992fbf91f2fd 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -452,7 +452,7 @@ static void adi_init_center(struct adi *adi)
for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) {
t = adi->abs[i];
- x = adi->dev->abs[t];
+ x = input_abs_get_val(adi->dev, t);
if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE)
x = i < adi->axes10 ? 512 : 128;
diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
index 05022f07ec775..e90694fe0d5ca 100644
--- a/drivers/input/joystick/amijoy.c
+++ b/drivers/input/joystick/amijoy.c
@@ -139,8 +139,8 @@ static int __init amijoy_init(void)
amijoy_dev[i]->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
for (j = 0; j < 2; j++) {
- amijoy_dev[i]->absmin[ABS_X + j] = -1;
- amijoy_dev[i]->absmax[ABS_X + j] = 1;
+ XXinput_set_abs_params(amijoy_dev[i], ABS_X + j,
+ -1, 1, 0, 0);
}
err = input_register_device(amijoy_dev[i]);
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 45ac70eae0aa7..0536b1b2f018e 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -318,11 +318,8 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv)
for (i = 0; i < gf2k_axes[gf2k->id]; i++)
set_bit(gf2k_abs[i], input_dev->absbit);
- for (i = 0; i < gf2k_hats[gf2k->id]; i++) {
- set_bit(ABS_HAT0X + i, input_dev->absbit);
- input_dev->absmin[ABS_HAT0X + i] = -1;
- input_dev->absmax[ABS_HAT0X + i] = 1;
- }
+ for (i = 0; i < gf2k_hats[gf2k->id]; i++)
+ input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
for (i = 0; i < gf2k_joys[gf2k->id]; i++)
set_bit(gf2k_btn_joy[i], input_dev->keybit);
@@ -334,11 +331,14 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv)
gf2k_read(gf2k, data);
for (i = 0; i < gf2k_axes[gf2k->id]; i++) {
- input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 :
- input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32;
- input_dev->absmin[gf2k_abs[i]] = 32;
- input_dev->absfuzz[gf2k_abs[i]] = 8;
- input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
+ int max = i < 2 ?
+ input_abs_get_val(input_dev, gf2k_abs[i]) * 2 :
+ input_abs_get_val(input_dev, gf2k_abs[0]) +
+ input_abs_get_val(input_dev, gf2k_abs[1]);
+ int flat = i < 2 ? 24 : 0;
+
+ input_set_abs_params(input_dev, gf2k_abs[i],
+ 32, max - 32, 8, flat);
}
err = input_register_device(gf2k->dev);
diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c
index 2478289aeeea1..16fb19d1ca25f 100644
--- a/drivers/input/joystick/interact.c
+++ b/drivers/input/joystick/interact.c
@@ -270,18 +270,14 @@ static int interact_connect(struct gameport *gameport, struct gameport_driver *d
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) {
- set_bit(t, input_dev->absbit);
- if (i < interact_type[interact->type].b8) {
- input_dev->absmin[t] = 0;
- input_dev->absmax[t] = 255;
- } else {
- input_dev->absmin[t] = -1;
- input_dev->absmax[t] = 1;
- }
+ if (i < interact_type[interact->type].b8)
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
+ else
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
}
for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++)
- set_bit(t, input_dev->keybit);
+ __set_bit(t, input_dev->keybit);
err = input_register_device(interact->dev);
if (err)
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index ca13a6bec33ef..b8d86115644bb 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -761,17 +761,21 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
for (j = 0; (bits = sw_bit[sw->type][j]); j++) {
+ int min, max, fuzz, flat;
+
code = sw_abs[sw->type][j];
- set_bit(code, input_dev->absbit);
- input_dev->absmax[code] = (1 << bits) - 1;
- input_dev->absmin[code] = (bits == 1) ? -1 : 0;
- input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0;
- if (code != ABS_THROTTLE)
- input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0;
+ min = bits == 1 ? -1 : 0;
+ max = (1 << bits) - 1;
+ fuzz = (bits >> 1) >= 2 ? 1 << ((bits >> 1) - 2) : 0;
+ flat = code == ABS_THROTTLE || bits < 5 ?
+ 0 : 1 << (bits - 5);
+
+ input_set_abs_params(input_dev, code,
+ min, max, fuzz, flat);
}
for (j = 0; (code = sw_btn[sw->type][j]); j++)
- set_bit(code, input_dev->keybit);
+ __set_bit(code, input_dev->keybit);
dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k);
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index c83f4b2ec7d35..ddd5afd301d45 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -232,15 +232,16 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
if (absdev) {
val = lo + (hi << 8);
#ifdef TABLET_AUTOADJUST
- if (val < dev->absmin[ABS_X + i])
- dev->absmin[ABS_X + i] = val;
- if (val > dev->absmax[ABS_X + i])
- dev->absmax[ABS_X + i] = val;
+ if (val < input_abs_min(dev, ABS_X + i))
+ input_abs_set_min(dev, ABS_X + i, val);
+ if (val > input_abs_max(dev, ABS_X + i))
+ XXinput_abs_set_max(dev, ABS_X + i, val);
#endif
- if (i%3) val = dev->absmax[ABS_X + i] - val;
+ if (i % 3)
+ val = input_abs_max(dev, ABS_X + i) - val;
input_report_abs(dev, ABS_X + i, val);
} else {
- val = (int) (((int8_t)lo) | ((int8_t)hi << 8));
+ val = (int) (((int8_t) lo) | ((int8_t) hi << 8));
if (i % 3)
val *= -1;
input_report_rel(dev, REL_X + i, val);
@@ -387,9 +388,11 @@ static void hil_dev_pointer_setup(struct hil_dev *ptr)
#ifdef TABLET_AUTOADJUST
for (i = 0; i < ABS_MAX; i++) {
- int diff = input_dev->absmax[ABS_X + i] / 10;
- input_dev->absmin[ABS_X + i] += diff;
- input_dev->absmax[ABS_X + i] -= diff;
+ int diff = input_abs_max(input_dev, ABS_X + i) / 10;
+ input_abs_set_min(input_dev, ABS_X + i,
+ input_abs_min(input_dev, ABS_X + i) + diff)
+ XXinput_abs_set_max(input_dev, ABS_X + i,
+ input_abs_max(input_dev, ABS_X + i) - diff)
}
#endif
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index b71eb55f2dbc9..bb53fd33cd1cb 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -304,21 +304,25 @@ static int uinput_validate_absbits(struct input_dev *dev)
if (!test_bit(cnt, dev->absbit))
continue;
- if ((dev->absmax[cnt] <= dev->absmin[cnt])) {
+ if (input_abs_get_max(dev, cnt) <= input_abs_get_min(dev, cnt)) {
printk(KERN_DEBUG
"%s: invalid abs[%02x] min:%d max:%d\n",
UINPUT_NAME, cnt,
- dev->absmin[cnt], dev->absmax[cnt]);
+ input_abs_get_min(dev, cnt),
+ input_abs_get_max(dev, cnt));
retval = -EINVAL;
break;
}
- if (dev->absflat[cnt] > (dev->absmax[cnt] - dev->absmin[cnt])) {
+ if (input_abs_get_flat(dev, cnt) >
+ input_abs_get_max(dev, cnt) - input_abs_get_min(dev, cnt)) {
printk(KERN_DEBUG
- "%s: absflat[%02x] out of range: %d "
+ "%s: abs_flat #%02x out of range: %d "
"(min:%d/max:%d)\n",
- UINPUT_NAME, cnt, dev->absflat[cnt],
- dev->absmin[cnt], dev->absmax[cnt]);
+ UINPUT_NAME, cnt,
+ input_abs_get_flat(dev, cnt),
+ input_abs_get_min(dev, cnt),
+ input_abs_get_max(dev, cnt));
retval = -EINVAL;
break;
}
@@ -343,7 +347,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
struct uinput_user_dev *user_dev;
struct input_dev *dev;
char *name;
- int size;
+ int i, size;
int retval;
if (count != sizeof(struct uinput_user_dev))
@@ -387,11 +391,12 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
dev->id.product = user_dev->id.product;
dev->id.version = user_dev->id.version;
- size = sizeof(int) * ABS_CNT;
- memcpy(dev->absmax, user_dev->absmax, size);
- memcpy(dev->absmin, user_dev->absmin, size);
- memcpy(dev->absfuzz, user_dev->absfuzz, size);
- memcpy(dev->absflat, user_dev->absflat, size);
+ for (i = 0; i < ABS_CNT; i++) {
+ input_abs_set_max(dev, i, user_dev->absmax[i]);
+ input_abs_set_min(dev, i, user_dev->absmin[i]);
+ input_abs_set_fuzz(dev, i, user_dev->absfuzz[i]);
+ input_abs_set_flat(dev, i, user_dev->absflat[i]);
+ }
/* check if absmin/absmax/absfuzz/absflat are filled as
* told in Documentation/input/input-programming.txt */
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index 3941f97cfa60e..7b02b652e267e 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -145,8 +145,8 @@ static int __init pc110pad_init(void)
pc110pad_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y);
pc110pad_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
- pc110pad_dev->absmax[ABS_X] = 0x1ff;
- pc110pad_dev->absmax[ABS_Y] = 0x0ff;
+ input_abs_set_max(pc110pad_dev, ABS_X, 0x1ff);
+ input_abs_set_max(pc110pad_dev, ABS_Y, 0x0ff);
pc110pad_dev->open = pc110pad_open;
pc110pad_dev->close = pc110pad_close;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 85a1e1460996f..2bf93432b8c05 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -629,8 +629,8 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
__clear_bit(REL_X, dev->relbit);
__clear_bit(REL_Y, dev->relbit);
- dev->absres[ABS_X] = priv->x_res;
- dev->absres[ABS_Y] = priv->y_res;
+ input_abs_set_res(dev, ABS_X, priv->x_res);
+ input_abs_set_res(dev, ABS_Y, priv->y_res);
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/* Clickpads report only left button */
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index d8f68f77007b6..83c24cca234a5 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -22,6 +22,7 @@
#include <linux/random.h>
#include <linux/major.h>
#include <linux/device.h>
+#include <linux/kernel.h>
#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
#include <linux/miscdevice.h>
#endif
@@ -134,11 +135,14 @@ static void mousedev_touchpad_event(struct input_dev *dev,
switch (code) {
case ABS_X:
+
fx(0) = value;
if (mousedev->touch && mousedev->pkt_count >= 2) {
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ size = input_abs_get_min(dev, ABS_X) -
+ input_abs_get_max(dev, ABS_X);
if (size == 0)
size = 256 * 2;
+
tmp = ((value - fx(2)) * 256 * FRACTION_DENOM) / size;
tmp += mousedev->frac_dx;
mousedev->packet.dx = tmp / FRACTION_DENOM;
@@ -150,10 +154,12 @@ static void mousedev_touchpad_event(struct input_dev *dev,
case ABS_Y:
fy(0) = value;
if (mousedev->touch && mousedev->pkt_count >= 2) {
- /* use X size to keep the same scale */
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ /* use X size for ABS_Y to keep the same scale */
+ size = input_abs_get_min(dev, ABS_X) -
+ input_abs_get_max(dev, ABS_X);
if (size == 0)
size = 256 * 2;
+
tmp = -((value - fy(2)) * 256 * FRACTION_DENOM) / size;
tmp += mousedev->frac_dy;
mousedev->packet.dy = tmp / FRACTION_DENOM;
@@ -167,33 +173,35 @@ static void mousedev_touchpad_event(struct input_dev *dev,
static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev,
unsigned int code, int value)
{
- int size;
+ int min, max, size;
switch (code) {
case ABS_X:
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ min = input_abs_get_min(dev, ABS_X);
+ max = input_abs_get_max(dev, ABS_X);
+
+ size = max - min;
if (size == 0)
size = xres ? : 1;
- if (value > dev->absmax[ABS_X])
- value = dev->absmax[ABS_X];
- if (value < dev->absmin[ABS_X])
- value = dev->absmin[ABS_X];
- mousedev->packet.x =
- ((value - dev->absmin[ABS_X]) * xres) / size;
+
+ clamp(value, min, max);
+
+ mousedev->packet.x = ((value - min) * xres) / size;
mousedev->packet.abs_event = 1;
break;
case ABS_Y:
- size = dev->absmax[ABS_Y] - dev->absmin[ABS_Y];
+ min = input_abs_get_min(dev, ABS_Y);
+ max = input_abs_get_max(dev, ABS_Y);
+
+ size = max - min;
if (size == 0)
size = yres ? : 1;
- if (value > dev->absmax[ABS_Y])
- value = dev->absmax[ABS_Y];
- if (value < dev->absmin[ABS_Y])
- value = dev->absmin[ABS_Y];
- mousedev->packet.y = yres -
- ((value - dev->absmin[ABS_Y]) * yres) / size;
+
+ clamp(value, min, max);
+
+ mousedev->packet.y = yres - ((value - min) * yres) / size;
mousedev->packet.abs_event = 1;
break;
}
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 51b80b08d4674..57b25b84d1fcf 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -987,20 +987,17 @@ static int aiptek_program_tablet(struct aiptek *aiptek)
/* Query getXextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
return ret;
- aiptek->inputdev->absmin[ABS_X] = 0;
- aiptek->inputdev->absmax[ABS_X] = ret - 1;
+ input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0);
/* Query getYextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
return ret;
- aiptek->inputdev->absmin[ABS_Y] = 0;
- aiptek->inputdev->absmax[ABS_Y] = ret - 1;
+ input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0);
/* Query getPressureLevels */
if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
return ret;
- aiptek->inputdev->absmin[ABS_PRESSURE] = 0;
- aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1;
+ input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0);
/* Depending on whether we are in absolute or relative mode, we will
* do a switchToTablet(absolute) or switchToMouse(relative) command.
@@ -1054,8 +1051,8 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr
struct aiptek *aiptek = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%dx%d\n",
- aiptek->inputdev->absmax[ABS_X] + 1,
- aiptek->inputdev->absmax[ABS_Y] + 1);
+ input_abs_get_max(aiptek->inputdev, ABS_X) + 1,
+ input_abs_get_max(aiptek->inputdev, ABS_Y) + 1);
}
/* These structs define the sysfs files, param #1 is the name of the
@@ -1843,7 +1840,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
aiptek->curSetting.programmableDelay = speeds[i];
(void)aiptek_program_tablet(aiptek);
- if (aiptek->inputdev->absmax[ABS_X] > 0) {
+ if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) {
dev_info(&intf->dev,
"Aiptek using %d ms programming speed\n",
aiptek->curSetting.programmableDelay);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 555ef26e206d5..87427d02e7616 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -686,10 +686,10 @@ static void wacom_tpc_finger_in(struct wacom_wac *wacom, char *data, int idx)
* protocol.
*/
if (wacom->last_finger != finger) {
- if (x == input->abs[ABS_X])
+ if (x == input_abs_get_val(input, ABS_X))
x++;
- if (y == input->abs[ABS_Y])
+ if (y == input_abs_get_val(input, ABS_Y))
y++;
}
--
GitLab
From d31b2865a4e8a9dd02f39e56c8fadb824c5e187b Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 2 Aug 2010 20:18:21 -0700
Subject: [PATCH 207/863] Input: dynamically allocate ABS information
As all callers are now changed to only use the input_abs_*() access
helpers, switching over to dynamically allocated ABS information is
easy. This reduces size of struct input_dev from 3152 to 1640 on
64 bit architectures.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/evdev.c | 21 ++++------------
drivers/input/input.c | 42 +++++++++++++++++++++++++++++--
include/linux/input.h | 57 ++++++++++++++-----------------------------
3 files changed, 63 insertions(+), 57 deletions(-)
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 9807c8ff6a847..08f48c03eec4a 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -649,13 +649,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
t = _IOC_NR(cmd) & ABS_MAX;
-
- abs.value = input_abs_get_val(dev, t);
- abs.minimum = input_abs_get_min(dev, t);
- abs.maximum = input_abs_get_max(dev, t);
- abs.fuzz = input_abs_get_fuzz(dev, t);
- abs.flat = input_abs_get_flat(dev, t);
- abs.resolution = input_abs_get_res(dev, t);
+ abs = dev->absinfo[t];
if (copy_to_user(p, &abs, min_t(size_t,
_IOC_SIZE(cmd),
@@ -691,6 +685,9 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
sizeof(struct input_absinfo))))
return -EFAULT;
+ if (_IOC_SIZE(cmd) < sizeof(struct input_absinfo))
+ abs.resolution = 0;
+
/* We can't change number of reserved MT slots */
if (t == ABS_MT_SLOT)
return -EINVAL;
@@ -701,15 +698,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
* of event.
*/
spin_lock_irq(&dev->event_lock);
-
- input_abs_set_val(dev, t, abs.value);
- input_abs_set_min(dev, t, abs.minimum);
- input_abs_set_max(dev, t, abs.maximum);
- input_abs_set_fuzz(dev, t, abs.fuzz);
- input_abs_set_flat(dev, t, abs.flat);
- input_abs_set_res(dev, t, _IOC_SIZE(cmd) < sizeof(struct input_absinfo) ?
- 0 : abs.resolution);
-
+ dev->absinfo[t] = abs;
spin_unlock_irq(&dev->event_lock);
return 0;
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 7259adb8619dd..a9b025f4147a0 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -182,7 +182,7 @@ static int input_handle_abs_event(struct input_dev *dev,
is_mt_event = code >= ABS_MT_FIRST && code <= ABS_MT_LAST;
if (!is_mt_event) {
- pold = &dev->abs[code];
+ pold = &dev->absinfo[code].value;
} else if (dev->mt) {
struct input_mt_slot *mtslot = &dev->mt[dev->slot];
pold = &mtslot->abs[code - ABS_MT_FIRST];
@@ -196,7 +196,7 @@ static int input_handle_abs_event(struct input_dev *dev,
if (pold) {
*pval = input_defuzz_abs_event(*pval, *pold,
- dev->absfuzz[code]);
+ dev->absinfo[code].fuzz);
if (*pold == *pval)
return INPUT_IGNORE_EVENT;
@@ -390,6 +390,43 @@ void input_inject_event(struct input_handle *handle,
}
EXPORT_SYMBOL(input_inject_event);
+/**
+ * input_alloc_absinfo - allocates array of input_absinfo structs
+ * @dev: the input device emitting absolute events
+ *
+ * If the absinfo struct the caller asked for is already allocated, this
+ * functions will not do anything.
+ */
+void input_alloc_absinfo(struct input_dev *dev)
+{
+ if (!dev->absinfo)
+ dev->absinfo = kcalloc(ABS_CNT, sizeof(struct input_absinfo),
+ GFP_KERNEL);
+
+ WARN(!dev->absinfo, "%s(): kcalloc() failed?\n", __func__);
+}
+EXPORT_SYMBOL(input_alloc_absinfo);
+
+void input_set_abs_params(struct input_dev *dev, unsigned int axis,
+ int min, int max, int fuzz, int flat)
+{
+ struct input_absinfo *absinfo;
+
+ input_alloc_absinfo(dev);
+ if (!dev->absinfo)
+ return;
+
+ absinfo = &dev->absinfo[axis];
+ absinfo->minimum = min;
+ absinfo->maximum = max;
+ absinfo->fuzz = fuzz;
+ absinfo->flat = flat;
+
+ dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
+}
+EXPORT_SYMBOL(input_set_abs_params);
+
+
/**
* input_grab_device - grabs device for exclusive use
* @handle: input handle that wants to own the device
@@ -1308,6 +1345,7 @@ static void input_dev_release(struct device *device)
input_ff_destroy(dev);
input_mt_destroy_slots(dev);
+ kfree(dev->absinfo);
kfree(dev);
module_put(THIS_MODULE);
diff --git a/include/linux/input.h b/include/linux/input.h
index 4a5531161de16..896a92227bc42 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -776,6 +776,7 @@ struct input_absinfo {
#define REP_DELAY 0x00
#define REP_PERIOD 0x01
#define REP_MAX 0x01
+#define REP_CNT (REP_MAX+1)
/*
* Sounds
@@ -1099,21 +1100,18 @@ struct input_mt_slot {
* @repeat_key: stores key code of the last key pressed; used to implement
* software autorepeat
* @timer: timer for software autorepeat
- * @abs: current values for reports from absolute axes
* @rep: current values for autorepeat parameters (delay, rate)
* @mt: pointer to array of struct input_mt_slot holding current values
* of tracked contacts
* @mtsize: number of MT slots the device uses
* @slot: MT slot currently being transmitted
+ * @absinfo: array of &struct absinfo elements holding information
+ * about absolute axes (current value, min, max, flat, fuzz,
+ * resolution)
* @key: reflects current state of device's keys/buttons
* @led: reflects current state of device's LEDs
* @snd: reflects current state of sound effects
* @sw: reflects current state of device's switches
- * @absmax: maximum values for events coming from absolute axes
- * @absmin: minimum values for events coming from absolute axes
- * @absfuzz: describes noisiness for axes
- * @absflat: size of the center flat position (used by joydev)
- * @absres: resolution used for events coming form absolute axes
* @open: this method is called when the very first user calls
* input_open_device(). The driver must prepare the device
* to start generating events (start polling thread,
@@ -1180,24 +1178,19 @@ struct input_dev {
unsigned int repeat_key;
struct timer_list timer;
- int abs[ABS_CNT];
- int rep[REP_MAX + 1];
+ int rep[REP_CNT];
struct input_mt_slot *mt;
int mtsize;
int slot;
+ struct input_absinfo *absinfo;
+
unsigned long key[BITS_TO_LONGS(KEY_CNT)];
unsigned long led[BITS_TO_LONGS(LED_CNT)];
unsigned long snd[BITS_TO_LONGS(SND_CNT)];
unsigned long sw[BITS_TO_LONGS(SW_CNT)];
- int absmax[ABS_CNT];
- int absmin[ABS_CNT];
- int absfuzz[ABS_CNT];
- int absflat[ABS_CNT];
- int absres[ABS_CNT];
-
int (*open)(struct input_dev *dev);
void (*close)(struct input_dev *dev);
int (*flush)(struct input_dev *dev, struct file *file);
@@ -1459,45 +1452,31 @@ static inline void input_set_events_per_packet(struct input_dev *dev, int n_even
dev->hint_events_per_packet = n_events;
}
-static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
-{
- dev->absmin[axis] = min;
- dev->absmax[axis] = max;
- dev->absfuzz[axis] = fuzz;
- dev->absflat[axis] = flat;
-
- dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
-}
+void input_alloc_absinfo(struct input_dev *dev);
+void input_set_abs_params(struct input_dev *dev, unsigned int axis,
+ int min, int max, int fuzz, int flat);
#define INPUT_GENERATE_ABS_ACCESSORS(_suffix, _item) \
static inline int input_abs_get_##_suffix(struct input_dev *dev, \
unsigned int axis) \
{ \
- return dev->abs##_item[axis]; \
+ return dev->absinfo ? dev->absinfo[axis]._item : 0; \
} \
\
static inline void input_abs_set_##_suffix(struct input_dev *dev, \
unsigned int axis, int val) \
{ \
- dev->abs##_item[axis] = val; \
+ input_alloc_absinfo(dev); \
+ if (dev->absinfo) \
+ dev->absinfo[axis]._item = val; \
}
-INPUT_GENERATE_ABS_ACCESSORS(min, min)
-INPUT_GENERATE_ABS_ACCESSORS(max, max)
+INPUT_GENERATE_ABS_ACCESSORS(val, value)
+INPUT_GENERATE_ABS_ACCESSORS(min, minimum)
+INPUT_GENERATE_ABS_ACCESSORS(max, maximum)
INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz)
INPUT_GENERATE_ABS_ACCESSORS(flat, flat)
-INPUT_GENERATE_ABS_ACCESSORS(res, res)
-
-static inline int input_abs_get_val(struct input_dev *dev, unsigned int axis)
-{
- return dev->abs[axis];
-}
-
-static inline void input_abs_set_val(struct input_dev *dev,
- unsigned int axis, int val)
-{
- dev->abs[axis] = val;
-}
+INPUT_GENERATE_ABS_ACCESSORS(res, resolution)
int input_get_keycode(struct input_dev *dev,
unsigned int scancode, unsigned int *keycode);
--
GitLab
From 448cd1664a573e69f54bfd32f3bb7220212b6cf5 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon, 2 Aug 2010 20:29:10 -0700
Subject: [PATCH 208/863] Input: evdev - rearrange ioctl handling
Split ioctl handling into 3 separate sections: fixed-length ioctls,
variable-length ioctls and multi-number variable length handlers.
This reduces identation and makes the code a bit clearer.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/evdev.c | 141 ++++++++++++++++++++++--------------------
1 file changed, 73 insertions(+), 68 deletions(-)
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 08f48c03eec4a..c908c5f83645c 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -492,13 +492,15 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p)
}
#define OLD_KEY_MAX 0x1ff
-static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode)
+static int handle_eviocgbit(struct input_dev *dev,
+ unsigned int type, unsigned int size,
+ void __user *p, int compat_mode)
{
static unsigned long keymax_warn_time;
unsigned long *bits;
int len;
- switch (_IOC_NR(cmd) & EV_MAX) {
+ switch (type) {
case 0: bits = dev->evbit; len = EV_MAX; break;
case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
@@ -517,7 +519,7 @@ static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user
* EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
* should be in bytes, not in bits.
*/
- if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) {
+ if (type == EV_KEY && size == OLD_KEY_MAX) {
len = OLD_KEY_MAX;
if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
printk(KERN_WARNING
@@ -528,7 +530,7 @@ static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user
BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
}
- return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
+ return bits_to_user(bits, len, size, p, compat_mode);
}
#undef OLD_KEY_MAX
@@ -542,8 +544,10 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
struct ff_effect effect;
int __user *ip = (int __user *)p;
unsigned int i, t, u, v;
+ unsigned int size;
int error;
+ /* First we check for fixed-length commands */
switch (cmd) {
case EVIOCGVERSION:
@@ -610,101 +614,102 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
return evdev_grab(evdev, client);
else
return evdev_ungrab(evdev, client);
+ }
- default:
+ size = _IOC_SIZE(cmd);
- if (_IOC_TYPE(cmd) != 'E')
- return -EINVAL;
+ /* Now check variable-length commands */
+#define EVIOC_MASK_SIZE(nr) ((nr) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
- if (_IOC_DIR(cmd) == _IOC_READ) {
+ switch (EVIOC_MASK_SIZE(cmd)) {
- if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
- return handle_eviocgbit(dev, cmd, p, compat_mode);
+ case EVIOCGKEY(0):
+ return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
- return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
- p, compat_mode);
+ case EVIOCGLED(0):
+ return bits_to_user(dev->led, LED_MAX, size, p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGLED(0)))
- return bits_to_user(dev->led, LED_MAX, _IOC_SIZE(cmd),
- p, compat_mode);
+ case EVIOCGSND(0):
+ return bits_to_user(dev->snd, SND_MAX, size, p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSND(0)))
- return bits_to_user(dev->snd, SND_MAX, _IOC_SIZE(cmd),
- p, compat_mode);
+ case EVIOCGSW(0):
+ return bits_to_user(dev->sw, SW_MAX, size, p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSW(0)))
- return bits_to_user(dev->sw, SW_MAX, _IOC_SIZE(cmd),
- p, compat_mode);
+ case EVIOCGNAME(0):
+ return str_to_user(dev->name, size, p);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
- return str_to_user(dev->name, _IOC_SIZE(cmd), p);
+ case EVIOCGPHYS(0):
+ return str_to_user(dev->phys, size, p);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0)))
- return str_to_user(dev->phys, _IOC_SIZE(cmd), p);
+ case EVIOCGUNIQ(0):
+ return str_to_user(dev->uniq, size, p);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCGUNIQ(0)))
- return str_to_user(dev->uniq, _IOC_SIZE(cmd), p);
+ case EVIOC_MASK_SIZE(EVIOCSFF):
+ if (input_ff_effect_from_user(p, size, &effect))
+ return -EFAULT;
- if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
+ error = input_ff_upload(dev, &effect, file);
- t = _IOC_NR(cmd) & ABS_MAX;
- abs = dev->absinfo[t];
+ if (put_user(effect.id, &(((struct ff_effect __user *)p)->id)))
+ return -EFAULT;
- if (copy_to_user(p, &abs, min_t(size_t,
- _IOC_SIZE(cmd),
- sizeof(struct input_absinfo))))
- return -EFAULT;
+ return error;
+ }
- return 0;
- }
+ /* Multi-number variable-length handlers */
+ if (_IOC_TYPE(cmd) != 'E')
+ return -EINVAL;
- }
+ if (_IOC_DIR(cmd) == _IOC_READ) {
- if (_IOC_DIR(cmd) == _IOC_WRITE) {
+ if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
+ return handle_eviocgbit(dev,
+ _IOC_NR(cmd) & EV_MAX, size,
+ p, compat_mode);
- if (_IOC_NR(cmd) == _IOC_NR(EVIOCSFF)) {
+ if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
- if (input_ff_effect_from_user(p, _IOC_SIZE(cmd), &effect))
- return -EFAULT;
+ t = _IOC_NR(cmd) & ABS_MAX;
+ abs = dev->absinfo[t];
- error = input_ff_upload(dev, &effect, file);
+ if (copy_to_user(p, &abs, min_t(size_t,
+ size, sizeof(struct input_absinfo))))
+ return -EFAULT;
- if (put_user(effect.id, &(((struct ff_effect __user *)p)->id)))
- return -EFAULT;
+ return 0;
+ }
+ }
- return error;
- }
+ if (_IOC_DIR(cmd) == _IOC_READ) {
- if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
+ if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
- t = _IOC_NR(cmd) & ABS_MAX;
+ t = _IOC_NR(cmd) & ABS_MAX;
- if (copy_from_user(&abs, p, min_t(size_t,
- _IOC_SIZE(cmd),
- sizeof(struct input_absinfo))))
- return -EFAULT;
+ if (copy_from_user(&abs, p, min_t(size_t,
+ size, sizeof(struct input_absinfo))))
+ return -EFAULT;
- if (_IOC_SIZE(cmd) < sizeof(struct input_absinfo))
- abs.resolution = 0;
+ if (size < sizeof(struct input_absinfo))
+ abs.resolution = 0;
- /* We can't change number of reserved MT slots */
- if (t == ABS_MT_SLOT)
- return -EINVAL;
+ /* We can't change number of reserved MT slots */
+ if (t == ABS_MT_SLOT)
+ return -EINVAL;
- /*
- * Take event lock to ensure that we are not
- * changing device parameters in the middle
- * of event.
- */
- spin_lock_irq(&dev->event_lock);
- dev->absinfo[t] = abs;
- spin_unlock_irq(&dev->event_lock);
+ /*
+ * Take event lock to ensure that we are not
+ * changing device parameters in the middle
+ * of event.
+ */
+ spin_lock_irq(&dev->event_lock);
+ dev->absinfo[t] = abs;
+ spin_unlock_irq(&dev->event_lock);
- return 0;
- }
+ return 0;
}
}
+
return -EINVAL;
}
--
GitLab
From 173bdd746b128241d3d6d202142820692e7dd530 Mon Sep 17 00:00:00 2001
From: Shubhrajyoti D <shubhrajyoti@ti.com>
Date: Tue, 3 Aug 2010 19:44:40 -0700
Subject: [PATCH 209/863] Input: gpio_keys - add hooks to enable/disable device
Allow platform code to specify callbcks that will be invoked when
input device is opened or closed, allowing, for example, to enable
the device.
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/keyboard/gpio_keys.c | 22 ++++++++++++++++++++++
include/linux/gpio_keys.h | 2 ++
2 files changed, 24 insertions(+)
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index a9fd147f2ba74..6069abe31e42b 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -39,6 +39,8 @@ struct gpio_keys_drvdata {
struct input_dev *input;
struct mutex disable_lock;
unsigned int n_buttons;
+ int (*enable)(struct device *dev);
+ void (*disable)(struct device *dev);
struct gpio_button_data data[0];
};
@@ -423,6 +425,21 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
return error;
}
+static int gpio_keys_open(struct input_dev *input)
+{
+ struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
+
+ return ddata->enable ? ddata->enable(input->dev.parent) : 0;
+}
+
+static void gpio_keys_close(struct input_dev *input)
+{
+ struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
+
+ if (ddata->disable)
+ ddata->disable(input->dev.parent);
+}
+
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
@@ -444,13 +461,18 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
+ ddata->enable = pdata->enable;
+ ddata->disable = pdata->disable;
mutex_init(&ddata->disable_lock);
platform_set_drvdata(pdev, ddata);
+ input_set_drvdata(input, ddata);
input->name = pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
+ input->open = gpio_keys_open;
+ input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index cd0b3f30f48ed..ce73a30113b4d 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -17,6 +17,8 @@ struct gpio_keys_platform_data {
struct gpio_keys_button *buttons;
int nbuttons;
unsigned int rep:1; /* enable input subsystem auto repeat */
+ int (*enable)(struct device *dev);
+ void (*disable)(struct device *dev);
};
#endif
--
GitLab
From ad0d363b8fb7559a410483635349e22de6727988 Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kmpark@infradead.org>
Date: Fri, 28 May 2010 11:03:11 +0900
Subject: [PATCH 210/863] mtd: OneNAND: Introduce chip_probe function
Samsung SoCs use the own OneNAND controler and detect OneNAND chip at power on.
To use this feature, introduce the chip_probe function.
Also remove workaround for Samsung SoCs.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/onenand/onenand_base.c | 42 +++++++++++++++++++++---------
include/linux/mtd/onenand.h | 2 ++
2 files changed, 32 insertions(+), 12 deletions(-)
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index f749935f3cb53..a2bb520286f8f 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -3733,17 +3733,16 @@ int flexonenand_set_boundary(struct mtd_info *mtd, int die,
}
/**
- * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * onenand_chip_probe - [OneNAND Interface] The generic chip probe
* @param mtd MTD device structure
*
* OneNAND detection method:
* Compare the values from command with ones from register
*/
-static int onenand_probe(struct mtd_info *mtd)
+static int onenand_chip_probe(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
- int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id;
- int density;
+ int bram_maf_id, bram_dev_id, maf_id, dev_id;
int syscfg;
/* Save system configuration 1 */
@@ -3766,12 +3765,6 @@ static int onenand_probe(struct mtd_info *mtd)
/* Restore system configuration 1 */
this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
- /* Workaround */
- if (syscfg & ONENAND_SYS_CFG1_SYNC_WRITE) {
- bram_maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
- bram_dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
- }
-
/* Check manufacturer ID */
if (onenand_check_maf(bram_maf_id))
return -ENXIO;
@@ -3779,13 +3772,35 @@ static int onenand_probe(struct mtd_info *mtd)
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
- ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
- this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
return -ENXIO;
+ return 0;
+}
+
+/**
+ * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * @param mtd MTD device structure
+ */
+static int onenand_probe(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int maf_id, dev_id, ver_id;
+ int density;
+ int ret;
+
+ ret = this->chip_probe(mtd);
+ if (ret)
+ return ret;
+
+ /* Read manufacturer and device IDs from Register */
+ maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
+ dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+ ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+ this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
+
/* Flash device information */
onenand_print_device_info(dev_id, ver_id);
this->device_id = dev_id;
@@ -3912,6 +3927,9 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
if (!this->unlock_all)
this->unlock_all = onenand_unlock_all;
+ if (!this->chip_probe)
+ this->chip_probe = onenand_chip_probe;
+
if (!this->read_bufferram)
this->read_bufferram = onenand_read_bufferram;
if (!this->write_bufferram)
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index c26ff86ad08aa..0c8815bfae1c4 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -68,6 +68,7 @@ struct onenand_bufferram {
* @write_word: [REPLACEABLE] hardware specific function for write
* register of OneNAND
* @mmcontrol: sync burst read function
+ * @chip_probe: [REPLACEABLE] hardware specific function for chip probe
* @block_markbad: function to mark a block as bad
* @scan_bbt: [REPLACEALBE] hardware specific function for scanning
* Bad block Table
@@ -114,6 +115,7 @@ struct onenand_chip {
unsigned short (*read_word)(void __iomem *addr);
void (*write_word)(unsigned short value, void __iomem *addr);
void (*mmcontrol)(struct mtd_info *mtd, int sync_read);
+ int (*chip_probe)(struct mtd_info *mtd);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
int (*scan_bbt)(struct mtd_info *mtd);
--
GitLab
From 7b0507eb697ea157533b9a7e0a955f64a00b1b1d Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kmpark@infradead.org>
Date: Fri, 28 May 2010 11:15:35 +0900
Subject: [PATCH 211/863] mtd: OneNAND: Samsung SoCs use own chip_probe
function
Samsung SoCs use own chip_probe function.
Don't touch the memory configuration at probe time.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/onenand/samsung.c | 21 ++++++++-------------
1 file changed, 8 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 2750317cb58f0..cb443af3d45fe 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -630,6 +630,12 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
return 0;
}
+static int s5pc110_chip_probe(struct mtd_info *mtd)
+{
+ /* Now just return 0 */
+ return 0;
+}
+
static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state)
{
unsigned int flags = INT_ACT | LOAD_CMP;
@@ -757,6 +763,7 @@ static void s3c_onenand_setup(struct mtd_info *mtd)
/* Use generic onenand functions */
onenand->cmd_map = s5pc1xx_cmd_map;
this->read_bufferram = s5pc110_read_bufferram;
+ this->chip_probe = s5pc110_chip_probe;
return;
} else {
BUG();
@@ -781,7 +788,6 @@ static int s3c_onenand_probe(struct platform_device *pdev)
struct mtd_info *mtd;
struct resource *r;
int size, err;
- unsigned long onenand_ctrl_cfg = 0;
pdata = pdev->dev.platform_data;
/* No need to check pdata. the platform data is optional */
@@ -900,14 +906,6 @@ static int s3c_onenand_probe(struct platform_device *pdev)
}
onenand->phys_base = onenand->base_res->start;
-
- onenand_ctrl_cfg = readl(onenand->dma_addr + 0x100);
- if ((onenand_ctrl_cfg & ONENAND_SYS_CFG1_SYNC_WRITE) &&
- onenand->dma_addr)
- writel(onenand_ctrl_cfg & ~ONENAND_SYS_CFG1_SYNC_WRITE,
- onenand->dma_addr + 0x100);
- else
- onenand_ctrl_cfg = 0;
}
if (onenand_scan(mtd, 1)) {
@@ -915,10 +913,7 @@ static int s3c_onenand_probe(struct platform_device *pdev)
goto scan_failed;
}
- if (onenand->type == TYPE_S5PC110) {
- if (onenand_ctrl_cfg && onenand->dma_addr)
- writel(onenand_ctrl_cfg, onenand->dma_addr + 0x100);
- } else {
+ if (onenand->type != TYPE_S5PC110) {
/* S3C doesn't handle subpage write */
mtd->subpage_sft = 0;
this->subpagesize = mtd->writesize;
--
GitLab
From c9fb67735b307a3cdf57e568b6c50c860248d1d3 Mon Sep 17 00:00:00 2001
From: Mark Ware <mware@elphinstone.net>
Date: Thu, 27 May 2010 11:45:39 +1000
Subject: [PATCH 212/863] mtd: doc2000: fix uninitialized variable in
doc_ecc_decode()
The variable 'syn' was being used uninitialized. Also
fixed incorrect use of syn[] vs s[].
Tested on powerpc board with 64MiB DOC2000.
Signed-off-by: Mark Ware <mware@elphinstone.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/diskonchip.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 47067bc98248b..51315f55f9057 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -146,6 +146,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
uint8_t parity;
uint16_t ds[4], s[5], tmp, errval[8], syn[4];
+ memset(syn, 0, sizeof(syn));
/* Convert the ecc bytes into words */
ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8);
ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6);
@@ -169,9 +170,9 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
}
- /* Calc s[i] = s[i] / alpha^(v + i) */
+ /* Calc syn[i] = s[i] / alpha^(v + i) */
for (i = 0; i < NROOTS; i++) {
- if (syn[i])
+ if (s[i])
syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
}
/* Call the decoder library */
--
GitLab
From 04dd0d3a9a33fdd8c3516db0fa85d9dba5610fc2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 17 Jun 2010 20:59:04 +0200
Subject: [PATCH 213/863] mtd: mxc_nand: dont call suspend and resume
explicitly
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The mtd layer is responsible to call mtd->{suspend,resume}. Doing it
again in the driver is wrong and results in a warning:
nand_resume called for a chip which is not in suspended state
at resume time. Removing the calls from the resume and suspend
functions makes them empty allowing them to be deleted completely.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 43 +------------------------------------
1 file changed, 1 insertion(+), 42 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index b464f6b23d0dd..e8dc6468f8bc7 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -871,52 +871,11 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct nand_chip *nand_chip = mtd->priv;
- struct mxc_nand_host *host = nand_chip->priv;
- int ret = 0;
-
- DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
-
- ret = mtd->suspend(mtd);
-
- /*
- * nand_suspend locks the device for exclusive access, so
- * the clock must already be off.
- */
- BUG_ON(!ret && host->clk_act);
-
- return ret;
-}
-
-static int mxcnd_resume(struct platform_device *pdev)
-{
- struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct nand_chip *nand_chip = mtd->priv;
- int ret = 0;
-
- DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
-
- mtd->resume(mtd);
-
- return ret;
-}
-
-#else
-# define mxcnd_suspend NULL
-# define mxcnd_resume NULL
-#endif /* CONFIG_PM */
-
static struct platform_driver mxcnd_driver = {
.driver = {
.name = DRIVER_NAME,
- },
+ },
.remove = __devexit_p(mxcnd_remove),
- .suspend = mxcnd_suspend,
- .resume = mxcnd_resume,
};
static int __init mxc_nd_init(void)
--
GitLab
From 68640c2a416849ba8e0a69577d4be51a458a045a Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Mon, 14 Jun 2010 18:15:19 +0200
Subject: [PATCH 214/863] mtd: ixp4xx: add support for static flash partitions
This patch adds support for static flash partitioning from a platform
device. Also, we clean up some weirdness where statements were separated
by commas instead of semicolons. While we are at it, fix some minor bad
white space, too.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/maps/ixp4xx.c | 35 +++++++++++++++++++++++++++--------
1 file changed, 27 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index e0a5e0426ead4..1f9fde0dad35c 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -118,7 +118,7 @@ static void ixp4xx_copy_from(struct map_info *map, void *to,
*dest++ = BYTE1(data);
src += 2;
len -= 2;
- }
+ }
if (len > 0)
*dest++ = BYTE0(flash_read16(src));
@@ -185,6 +185,8 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
{
struct flash_platform_data *plat = dev->dev.platform_data;
struct ixp4xx_flash_info *info;
+ const char *part_type = NULL;
+ int nr_parts = 0;
int err = -1;
if (!plat)
@@ -218,9 +220,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
*/
info->map.bankwidth = 2;
info->map.name = dev_name(&dev->dev);
- info->map.read = ixp4xx_read16,
- info->map.write = ixp4xx_probe_write16,
- info->map.copy_from = ixp4xx_copy_from,
+ info->map.read = ixp4xx_read16;
+ info->map.write = ixp4xx_probe_write16;
+ info->map.copy_from = ixp4xx_copy_from;
info->res = request_mem_region(dev->resource->start,
resource_size(dev->resource),
@@ -248,11 +250,28 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
info->mtd->owner = THIS_MODULE;
/* Use the fast version */
- info->map.write = ixp4xx_write16,
+ info->map.write = ixp4xx_write16;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions,
+ dev->resource->start);
+#endif
+ if (nr_parts > 0) {
+ part_type = "dynamic";
+ } else {
+ info->partitions = plat->parts;
+ nr_parts = plat->nr_parts;
+ part_type = "static";
+ }
+ if (nr_parts == 0) {
+ printk(KERN_NOTICE "IXP4xx flash: no partition info "
+ "available, registering whole flash\n");
+ err = add_mtd_device(info->mtd);
+ } else {
+ printk(KERN_NOTICE "IXP4xx flash: using %s partition "
+ "definition\n", part_type);
+ err = add_mtd_partitions(info->mtd, info->partitions, nr_parts);
- err = parse_mtd_partitions(info->mtd, probes, &info->partitions, dev->resource->start);
- if (err > 0) {
- err = add_mtd_partitions(info->mtd, info->partitions, err);
if(err)
printk(KERN_ERR "Could not parse partitions\n");
}
--
GitLab
From dd02b67d5e9e7896891fa27eb5db65f55a290998 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Tue, 15 Jun 2010 09:30:15 +0200
Subject: [PATCH 215/863] mtd: mtdchar: fix mmap for MTD RAM/ROM char devices
For no-mmu systems mmap() on RAM/ROM devices already works
but for systems with mmu it probably was not tested and
doesn't work.
This patch allows using mmap() on MTD RAM/ROM devices on systems
with MMU. It has been tested on mpc5121e based platform with
MR0A16A MRAM device attached over LocalBus.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/mtdchar.c | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index a8e69dd2b2e47..c27e65e3e291a 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -18,6 +18,7 @@
#include <linux/mount.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
#include <linux/mtd/compatmac.h>
#include <asm/uaccess.h>
@@ -955,9 +956,34 @@ static int mtd_mmap(struct file *file, struct vm_area_struct *vma)
#ifdef CONFIG_MMU
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
+ struct map_info *map = mtd->priv;
+ unsigned long start;
+ unsigned long off;
+ u32 len;
+
+ if (mtd->type == MTD_RAM || mtd->type == MTD_ROM) {
+ off = vma->vm_pgoff << PAGE_SHIFT;
+ start = map->phys;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + map->size);
+ start &= PAGE_MASK;
+ if ((vma->vm_end - vma->vm_start + off) > len)
+ return -EINVAL;
+
+ off += start;
+ vma->vm_pgoff = off >> PAGE_SHIFT;
+ vma->vm_flags |= VM_IO | VM_RESERVED;
+
+#ifdef pgprot_noncached
+ if (file->f_flags & O_DSYNC || off >= __pa(high_memory))
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
+ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
- if (mtd->type == MTD_RAM || mtd->type == MTD_ROM)
return 0;
+ }
return -ENOSYS;
#else
return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS;
--
GitLab
From f7b000904a848b64c36e3b4d0715744aaf345767 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@mvista.com>
Date: Tue, 22 Jun 2010 20:57:34 +0400
Subject: [PATCH 216/863] mtd: m25p80: Fix false-positive probing
Since commit 18c6182bae0acca220ed6611f741034d563cd19f ("Rework
probing/JEDEC code"), m25p80 driver successfully registers chips
even if JEDEC probing fails.
This was needed to support non-JEDEC flashes. Though, it appears
that some platforms (e.g. blackfin bf533 stamp[1]) used the old
behavior to detect if there's any flash connected, so the driver
have to fail on JEDEC probing errors.
This patch restores the old behavior for JEDEC flashes, and adds
"-nonjedec" SPI device IDs for M25Pxx flashes, so that the kernel
still supports non-JEDEC flashes.
[1] http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=5975
Reported-by: Mingquan Pan
Reported-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/devices/m25p80.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 372df59f79e2b..ff7627a3d0757 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -681,6 +681,16 @@ static const struct spi_device_id m25p_ids[] = {
{ "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
{ "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
+ { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
+ { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
+ { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) },
+ { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) },
+ { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) },
+ { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) },
+ { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) },
+ { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) },
+ { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) },
+
{ "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) },
{ "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
{ "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },
@@ -796,8 +806,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
jid = jedec_probe(spi);
if (!jid) {
- dev_info(&spi->dev, "non-JEDEC variant of %s\n",
- id->name);
+ return -ENODEV;
} else if (jid != id) {
/*
* JEDEC knows better, so overwrite platform ID. We
--
GitLab
From 9d2c4f3fe50a6d07275de91b392aaaf4773bc8b6 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@mvista.com>
Date: Tue, 22 Jun 2010 20:57:42 +0400
Subject: [PATCH 217/863] mtd: m25p80: Make jedec_probe() return proper errno
values
spi_write_then_read() may return its own return codes (e.g. -EIO),
so let's propagate the value down to the probe().
Also, remove jedec == 0 check, it isn't needed as nowadays we use
dedicated SPI device IDs for non-JEDEC flashes.
Suggested-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/devices/m25p80.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index ff7627a3d0757..48bf325e9e84e 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -16,6 +16,8 @@
*/
#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
@@ -734,7 +736,7 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
if (tmp < 0) {
DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
dev_name(&spi->dev), tmp);
- return NULL;
+ return ERR_PTR(tmp);
}
jedec = id[0];
jedec = jedec << 8;
@@ -742,14 +744,6 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
jedec = jedec << 8;
jedec |= id[2];
- /*
- * Some chips (like Numonyx M25P80) have JEDEC and non-JEDEC variants,
- * which depend on technology process. Officially RDID command doesn't
- * exist for non-JEDEC chips, but for compatibility they return ID 0.
- */
- if (jedec == 0)
- return NULL;
-
ext_jedec = id[3] << 8 | id[4];
for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
@@ -760,7 +754,7 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
return &m25p_ids[tmp];
}
}
- return NULL;
+ return ERR_PTR(-ENODEV);
}
@@ -805,8 +799,8 @@ static int __devinit m25p_probe(struct spi_device *spi)
const struct spi_device_id *jid;
jid = jedec_probe(spi);
- if (!jid) {
- return -ENODEV;
+ if (IS_ERR(jid)) {
+ return PTR_ERR(jid);
} else if (jid != id) {
/*
* JEDEC knows better, so overwrite platform ID. We
--
GitLab
From e17f47a14b3418711d9fee5c0a77ef0b672f5eaa Mon Sep 17 00:00:00 2001
From: Guillaume LECERF <glecerf@gmail.com>
Date: Fri, 2 Jul 2010 14:39:10 +0200
Subject: [PATCH 218/863] mtd: cfi_cmdset_0002: fix the check for valid primary
extension versions
Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3 [1][2].
Fix the check in cfi_cmdset_0002 accordingly.
[1] http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
[2] http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/chips/cfi_cmdset_0002.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index d81079ef91a53..749203f89b55f 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -417,16 +417,25 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
*/
cfi_fixup_major_minor(cfi, extp);
+ /*
+ * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3
+ * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 and on
+ * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
+ */
if (extp->MajorVersion != '1' ||
- (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+ (extp->MajorVersion == '1' && ( extp->MinorVersion < '0' || extp->MinorVersion > '3'))) {
printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query "
- "version %c.%c.\n", extp->MajorVersion,
- extp->MinorVersion);
+ "version %c.%c (%#02x/%#02x).\n",
+ extp->MajorVersion, extp->MinorVersion,
+ extp->MajorVersion, extp->MinorVersion);
kfree(extp);
kfree(mtd);
return NULL;
}
+ printk(KERN_INFO " Amd/Fujitsu Extended Query version %c.%c.\n",
+ extp->MajorVersion, extp->MinorVersion);
+
/* Install our own private info structure */
cfi->cmdset_priv = extp;
--
GitLab
From 7ee064c90b3a65aa0c8d8cd87681177645db494e Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 5 Aug 2010 11:07:39 -0400
Subject: [PATCH 219/863] mtd: Blackfin NFC: delete useless comment about jffs2
The low level NAND driver doesn't care about filesystems, so punt the
local comment indicating otherwise.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/bf5xx_nand.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 2974995e194d1..524cf5f415233 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -20,9 +20,6 @@
* - DMA supported in ECC_HW
* - YAFFS tested as rootfs in both ECC_HW and ECC_SW
*
- * TODO:
- * Enable JFFS2 over NAND as rootfs
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
--
GitLab
From 085d45fb5216c25b69103e5d861fabdc4389e221 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 5 Aug 2010 11:07:44 -0400
Subject: [PATCH 220/863] mtd: Blackfin NFC: fix raw page write/read handling
Our write_buf/read_buf funcs always do ECC in HW ECC mode. That is not
needed for raw funcs. In fact, write_buf/read_buf should be a pure func
for data input/output while chip->ecc.hwctl controls ECC. Unfortunately,
we can't separate ECC from normal data input/output in our NFC, so our DMA
write_buf/read_buf entries are coupled with ECC operations closely.
Thus we need to provide dedicated read_page_raw/write_page_raw funcs where
we do non-DMA transactions so as to avoid automatic ECC.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/bf5xx_nand.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 524cf5f415233..ca39819982bf5 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -571,6 +571,22 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
bf5xx_nand_write_buf(mtd, buf, len);
}
+static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
+ bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
+ bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
/*
* System initialization functions
*/
@@ -795,6 +811,8 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
chip->ecc.correct = bf5xx_nand_correct_data;
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.hwctl = bf5xx_nand_enable_hwecc;
+ chip->ecc.read_page_raw = bf5xx_nand_read_page_raw;
+ chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
}
--
GitLab
From fd508da2208696db146cd1be2bb2e8b799f6e3a2 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 5 Aug 2010 11:07:42 -0400
Subject: [PATCH 221/863] mtd: Blackfin NFC: make sure to check NAND_ALE in
cmd_ctrl
The NAND base may send some controls which are neither CLE nor ALE, so
we need to explicitly check both instead of assuming things are always
one or the other. Otherwise, we sometimes send out illegal addresses
to the NAND device.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/bf5xx_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index ca39819982bf5..5c999e01db6fa 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -203,7 +203,7 @@ static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
if (ctrl & NAND_CLE)
bfin_write_NFC_CMD(cmd);
- else
+ else if (ctrl & NAND_ALE)
bfin_write_NFC_ADDR(cmd);
SSYNC();
}
--
GitLab
From 00355b0baadf949f02ab7d3e2bd222e3fbcc72ee Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 5 Aug 2010 11:07:40 -0400
Subject: [PATCH 222/863] mtd: Blackfin NFC: fix typo for read/write delay
setup
We used the platform rd_dly field when we meant to use the wr_dly field.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/bf5xx_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 5c999e01db6fa..d48cc39afc21e 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -648,7 +648,7 @@ static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
val = (plat->page_size << NFC_PG_SIZE_OFFSET) |
(plat->data_width << NFC_NWIDTH_OFFSET) |
(plat->rd_dly << NFC_RDDLY_OFFSET) |
- (plat->rd_dly << NFC_WRDLY_OFFSET);
+ (plat->wr_dly << NFC_WRDLY_OFFSET);
dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val);
bfin_write_NFC_CTL(val);
--
GitLab
From 752b957a37ee1cc09fccb39a8bc5843edf32119b Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 5 Aug 2010 11:07:41 -0400
Subject: [PATCH 223/863] mtd: Blackfin NFC: wait for the ECC reset to finish
When resetting the ECC registers/counters, the bit will automatically
clear itself once the reset has actually finished. So make sure we
wait for that to occur before doing anything else rather than assuming
everything is peachy and proceeding with stale ECC values.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/bf5xx_nand.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index d48cc39afc21e..8070ff359a418 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -507,6 +507,8 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
*/
bfin_write_NFC_RST(ECC_RST);
SSYNC();
+ while (bfin_read_NFC_RST() & ECC_RST)
+ cpu_relax();
disable_dma(CH_NFC);
clear_dma_irqstat(CH_NFC);
--
GitLab
From 44299179c0e87cc6d8b753c1ca8c97b1cf9340e1 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 5 Aug 2010 11:07:43 -0400
Subject: [PATCH 224/863] mtd: Blackfin NFC: fix handling of page sizes
Rather than forcing the platform resources to declare the desired page
size, simply use the existing information passed down to us by the higher
layers. This way we work out of the box with all flash chips that the
kernel knows about.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
arch/blackfin/include/asm/nand.h | 3 --
drivers/mtd/nand/bf5xx_nand.c | 86 ++++++++++++++++++--------------
2 files changed, 48 insertions(+), 41 deletions(-)
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
index 3a1e79dfc8d92..256c50d8d4657 100644
--- a/arch/blackfin/include/asm/nand.h
+++ b/arch/blackfin/include/asm/nand.h
@@ -15,8 +15,6 @@
* partitions = mtd partition list
*/
-#define NFC_PG_SIZE_256 0
-#define NFC_PG_SIZE_512 1
#define NFC_PG_SIZE_OFFSET 9
#define NFC_NWIDTH_8 0
@@ -30,7 +28,6 @@
struct bf5xx_nand_platform {
/* NAND chip information */
- unsigned short page_size;
unsigned short data_width;
/* RD/WR strobe delay timing information, all times in SCLK cycles */
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 8070ff359a418..3784f41379949 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -314,18 +314,16 @@ static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
- struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- unsigned short page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
int ret;
ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
- /* If page size is 512, correct second 256 bytes */
- if (page_size == 512) {
+ /* If ecc size is 512, correct second 256 bytes */
+ if (chip->ecc.size == 512) {
dat += 256;
- read_ecc += 8;
- calc_ecc += 8;
+ read_ecc += 3;
+ calc_ecc += 3;
ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
}
@@ -341,13 +339,12 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
const u_char *dat, u_char *ecc_code)
{
struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- u16 page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
u16 ecc0, ecc1;
u32 code[2];
u8 *p;
- /* first 4 bytes ECC code for 256 page size */
+ /* first 3 bytes ECC code for 256 page size */
ecc0 = bfin_read_NFC_ECC0();
ecc1 = bfin_read_NFC_ECC1();
@@ -355,12 +352,11 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
- /* first 3 bytes in ecc_code for 256 page size */
p = (u8 *) code;
memcpy(ecc_code, p, 3);
- /* second 4 bytes ECC code for 512 page size */
- if (page_size == 512) {
+ /* second 3 bytes ECC code for 512 ecc size */
+ if (chip->ecc.size == 512) {
ecc0 = bfin_read_NFC_ECC2();
ecc1 = bfin_read_NFC_ECC3();
code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
@@ -480,8 +476,7 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
uint8_t *buf, int is_read)
{
struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- unsigned short page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
unsigned short val;
dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n",
@@ -495,10 +490,10 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
*/
if (is_read)
invalidate_dcache_range((unsigned int)buf,
- (unsigned int)(buf + page_size));
+ (unsigned int)(buf + chip->ecc.size));
else
flush_dcache_range((unsigned int)buf,
- (unsigned int)(buf + page_size));
+ (unsigned int)(buf + chip->ecc.size));
/*
* This register must be written before each page is
@@ -519,13 +514,13 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
/* The DMAs have different size on BF52x and BF54x */
#ifdef CONFIG_BF52x
- set_dma_x_count(CH_NFC, (page_size >> 1));
+ set_dma_x_count(CH_NFC, (chip->ecc.size >> 1));
set_dma_x_modify(CH_NFC, 2);
val = DI_EN | WDSIZE_16;
#endif
#ifdef CONFIG_BF54x
- set_dma_x_count(CH_NFC, (page_size >> 2));
+ set_dma_x_count(CH_NFC, (chip->ecc.size >> 2));
set_dma_x_modify(CH_NFC, 4);
val = DI_EN | WDSIZE_32;
#endif
@@ -547,12 +542,11 @@ static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
uint8_t *buf, int len)
{
struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- unsigned short page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len);
- if (len == page_size)
+ if (len == chip->ecc.size)
bf5xx_nand_dma_rw(mtd, buf, 1);
else
bf5xx_nand_read_buf(mtd, buf, len);
@@ -562,12 +556,11 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
const uint8_t *buf, int len)
{
struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct bf5xx_nand_platform *plat = info->platform;
- unsigned short page_size = (plat->page_size ? 512 : 256);
+ struct nand_chip *chip = mtd->priv;
dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len);
- if (len == page_size)
+ if (len == chip->ecc.size)
bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0);
else
bf5xx_nand_write_buf(mtd, buf, len);
@@ -642,12 +635,11 @@ static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
/* setup NFC_CTL register */
dev_info(info->device,
- "page_size=%d, data_width=%d, wr_dly=%d, rd_dly=%d\n",
- (plat->page_size ? 512 : 256),
+ "data_width=%d, wr_dly=%d, rd_dly=%d\n",
(plat->data_width ? 16 : 8),
plat->wr_dly, plat->rd_dly);
- val = (plat->page_size << NFC_PG_SIZE_OFFSET) |
+ val = (1 << NFC_PG_SIZE_OFFSET) |
(plat->data_width << NFC_NWIDTH_OFFSET) |
(plat->rd_dly << NFC_RDDLY_OFFSET) |
(plat->wr_dly << NFC_WRDLY_OFFSET);
@@ -713,6 +705,33 @@ static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
return 0;
}
+static int bf5xx_nand_scan(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ ret = nand_scan_ident(mtd, 1);
+ if (ret)
+ return ret;
+
+ if (hardware_ecc) {
+ /*
+ * for nand with page size > 512B, think it as several sections with 512B
+ */
+ if (likely(mtd->writesize >= 512)) {
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 6;
+ } else {
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
+ SSYNC();
+ }
+ }
+
+ return nand_scan_tail(mtd);
+}
+
/*
* bf5xx_nand_probe
*
@@ -798,15 +817,6 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
chip->badblock_pattern = &bootrom_bbt;
chip->ecc.layout = &bootrom_ecclayout;
#endif
-
- if (plat->page_size == NFC_PG_SIZE_256) {
- chip->ecc.bytes = 3;
- chip->ecc.size = 256;
- } else if (plat->page_size == NFC_PG_SIZE_512) {
- chip->ecc.bytes = 6;
- chip->ecc.size = 512;
- }
-
chip->read_buf = bf5xx_nand_dma_read_buf;
chip->write_buf = bf5xx_nand_dma_write_buf;
chip->ecc.calculate = bf5xx_nand_calculate_ecc;
@@ -820,7 +830,7 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
}
/* scan hardware nand chip and setup mtd info data struct */
- if (nand_scan(mtd, 1)) {
+ if (bf5xx_nand_scan(mtd)) {
err = -ENXIO;
goto out_err_nand_scan;
}
--
GitLab
From d2350c2ab51df7088d3db73a4c85ad73ded37a01 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 5 Aug 2010 11:07:38 -0400
Subject: [PATCH 225/863] mtd: Blackfin NFC: fix nand busy detection
The IRQSTAT register is a W1C register used by the interrupt handler and
may have its BUSY bit changed. This makes it somewhat unreliable for the
polling devready function. So switch it over to use the BUSY bit in the
STAT register that always reflects the current state of the hardware.
This fixes driver hangs seen when the NAND flash is under heavy system
load (like I/O benchmarks).
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/bf5xx_nand.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 3784f41379949..a382e3dd0a5dc 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -215,9 +215,9 @@ static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
*/
static int bf5xx_nand_devready(struct mtd_info *mtd)
{
- unsigned short val = bfin_read_NFC_IRQSTAT();
+ unsigned short val = bfin_read_NFC_STAT();
- if ((val & NBUSYIRQ) == NBUSYIRQ)
+ if ((val & NBUSY) == NBUSY)
return 1;
else
return 0;
--
GitLab
From 5bac3acfb82aa22c5e917063973db5482f7ff6ab Mon Sep 17 00:00:00 2001
From: Chuanxiao <chuanxiao.dong@gmail.com>
Date: Thu, 5 Aug 2010 23:06:04 +0800
Subject: [PATCH 226/863] nand/denali Clean up all white spaces in code indent
Hi,
I have changed the outlook mail cliet to be linux mutt client and use my
personal gmail to submit patches.
Here are 5 new patches to fix nand/denali check patch errors. The other
4 patches will be sent out after this mail.
Thanks for your review.
>From d125ad3f57bbf517131dccad6b5933edf8c2632a Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Tue, 3 Aug 2010 15:54:48 +0800
Subject: [PATCH 1/5] mtd: denali.c: clean up all whitespaces in code indent
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 337 +++++++++++++++++++-------------------
1 file changed, 168 insertions(+), 169 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ca03428b59cca..ca02838a420ef 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -29,7 +29,7 @@
MODULE_LICENSE("GPL");
-/* We define a module parameter that allows the user to override
+/* We define a module parameter that allows the user to override
* the hardware and decide what timing mode should be used.
*/
#define NAND_DEFAULT_TIMINGS -1
@@ -54,13 +54,13 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates
INTR_STATUS0__RST_COMP | \
INTR_STATUS0__ERASE_COMP)
-/* indicates whether or not the internal value for the flash bank is
+/* indicates whether or not the internal value for the flash bank is
valid or not */
-#define CHIP_SELECT_INVALID -1
+#define CHIP_SELECT_INVALID -1
#define SUPPORT_8BITECC 1
-/* This macro divides two integers and rounds fractional values up
+/* This macro divides two integers and rounds fractional values up
* to the nearest integer value. */
#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
@@ -83,7 +83,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates
#define ADDR_CYCLE 1
#define STATUS_CYCLE 2
-/* this is a helper macro that allows us to
+/* this is a helper macro that allows us to
* format the bank into the proper bits for the controller */
#define BANK(x) ((x) << 24)
@@ -95,28 +95,28 @@ static const struct pci_device_id denali_pci_ids[] = {
};
-/* these are static lookup tables that give us easy access to
- registers in the NAND controller.
+/* these are static lookup tables that give us easy access to
+ registers in the NAND controller.
*/
-static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
- INTR_STATUS1,
- INTR_STATUS2,
+static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
+ INTR_STATUS1,
+ INTR_STATUS2,
INTR_STATUS3};
static const uint32_t device_reset_banks[4] = {DEVICE_RESET__BANK0,
- DEVICE_RESET__BANK1,
- DEVICE_RESET__BANK2,
- DEVICE_RESET__BANK3};
+ DEVICE_RESET__BANK1,
+ DEVICE_RESET__BANK2,
+ DEVICE_RESET__BANK3};
static const uint32_t operation_timeout[4] = {INTR_STATUS0__TIME_OUT,
- INTR_STATUS1__TIME_OUT,
- INTR_STATUS2__TIME_OUT,
- INTR_STATUS3__TIME_OUT};
+ INTR_STATUS1__TIME_OUT,
+ INTR_STATUS2__TIME_OUT,
+ INTR_STATUS3__TIME_OUT};
static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
- INTR_STATUS1__RST_COMP,
- INTR_STATUS2__RST_COMP,
- INTR_STATUS3__RST_COMP};
+ INTR_STATUS1__RST_COMP,
+ INTR_STATUS2__RST_COMP,
+ INTR_STATUS3__RST_COMP};
/* specifies the debug level of the driver */
static int nand_debug_level = 0;
@@ -131,21 +131,21 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali);
/* This is a wrapper for writing to the denali registers.
* this allows us to create debug information so we can
- * observe how the driver is programming the device.
+ * observe how the driver is programming the device.
* it uses standard linux convention for (val, addr) */
static void denali_write32(uint32_t value, void *addr)
{
- iowrite32(value, addr);
+ iowrite32(value, addr);
#if DEBUG_DENALI
printk(KERN_ERR "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
#endif
-}
+}
-/* Certain operations for the denali NAND controller use an indexed mode to read/write
- data. The operation is performed by writing the address value of the command to
- the device memory followed by the data. This function abstracts this common
- operation.
+/* Certain operations for the denali NAND controller use an indexed mode to read/write
+ data. The operation is performed by writing the address value of the command to
+ the device memory followed by the data. This function abstracts this common
+ operation.
*/
static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data)
{
@@ -161,7 +161,7 @@ static void index_addr_read_data(struct denali_nand_info *denali,
*pdata = ioread32(denali->flash_mem + 0x10);
}
-/* We need to buffer some data for some of the NAND core routines.
+/* We need to buffer some data for some of the NAND core routines.
* The operations manage buffering that data. */
static void reset_buf(struct denali_nand_info *denali)
{
@@ -183,7 +183,7 @@ static void read_status(struct denali_nand_info *denali)
reset_buf(denali);
/* initiate a device status read */
- cmd = MODE_11 | BANK(denali->flash_bank);
+ cmd = MODE_11 | BANK(denali->flash_bank);
index_addr(denali, cmd | COMMAND_CYCLE, 0x70);
denali_write32(cmd | STATUS_CYCLE, denali->flash_mem);
@@ -199,7 +199,7 @@ static void read_status(struct denali_nand_info *denali)
static void reset_bank(struct denali_nand_info *denali)
{
uint32_t irq_status = 0;
- uint32_t irq_mask = reset_complete[denali->flash_bank] |
+ uint32_t irq_mask = reset_complete[denali->flash_bank] |
operation_timeout[denali->flash_bank];
int bank = 0;
@@ -209,7 +209,7 @@ static void reset_bank(struct denali_nand_info *denali)
denali_write32(bank, denali->flash_reg + DEVICE_RESET);
irq_status = wait_for_irq(denali, irq_mask);
-
+
if (irq_status & operation_timeout[denali->flash_bank])
{
printk(KERN_ERR "reset bank failed.\n");
@@ -610,7 +610,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali)
}
/* determines how many NAND chips are connected to the controller. Note for
- Intel CE4100 devices we don't support more than one device.
+ Intel CE4100 devices we don't support more than one device.
*/
static void find_valid_banks(struct denali_nand_info *denali)
{
@@ -641,8 +641,8 @@ static void find_valid_banks(struct denali_nand_info *denali)
{
/* Platform limitations of the CE4100 device limit
* users to a single chip solution for NAND.
- * Multichip support is not enabled.
- */
+ * Multichip support is not enabled.
+ */
if (denali->total_used_banks != 1)
{
printk(KERN_ERR "Sorry, Intel CE4100 only supports "
@@ -885,7 +885,7 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
dump_device_info(denali);
/* If the user specified to override the default timings
- * with a specific ONFI mode, we apply those changes here.
+ * with a specific ONFI mode, we apply those changes here.
*/
if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
{
@@ -912,7 +912,7 @@ static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
*/
static inline bool is_flash_bank_valid(int flash_bank)
{
- return (flash_bank >= 0 && flash_bank < 4);
+ return (flash_bank >= 0 && flash_bank < 4);
}
static void denali_irq_init(struct denali_nand_info *denali)
@@ -948,7 +948,7 @@ static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask
}
/* This function only returns when an interrupt that this driver cares about
- * occurs. This is to reduce the overhead of servicing interrupts
+ * occurs. This is to reduce the overhead of servicing interrupts
*/
static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
{
@@ -1003,9 +1003,9 @@ static void print_irq_log(struct denali_nand_info *denali)
}
#endif
-/* This is the interrupt service routine. It handles all interrupts
- * sent to this device. Note that on CE4100, this is a shared
- * interrupt.
+/* This is the interrupt service routine. It handles all interrupts
+ * sent to this device. Note that on CE4100, this is a shared
+ * interrupt.
*/
static irqreturn_t denali_isr(int irq, void *dev_id)
{
@@ -1015,12 +1015,12 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
spin_lock(&denali->irq_lock);
- /* check to see if a valid NAND chip has
- * been selected.
+ /* check to see if a valid NAND chip has
+ * been selected.
*/
if (is_flash_bank_valid(denali->flash_bank))
{
- /* check to see if controller generated
+ /* check to see if controller generated
* the interrupt, since this is a shared interrupt */
if ((irq_status = denali_irq_detected(denali)) != 0)
{
@@ -1078,10 +1078,10 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
/* our interrupt was detected */
break;
}
- else
+ else
{
- /* these are not the interrupts you are looking for -
- need to wait again */
+ /* these are not the interrupts you are looking for -
+ * need to wait again */
spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
print_irq_log(denali);
@@ -1095,20 +1095,20 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
if (comp_res == 0)
{
/* timeout */
- printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
- intr_status, irq_mask);
+ printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
+ intr_status, irq_mask);
intr_status = 0;
}
return intr_status;
}
-/* This helper function setups the registers for ECC and whether or not
+/* This helper function setups the registers for ECC and whether or not
the spare area will be transfered. */
-static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
+static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
bool transfer_spare)
{
- int ecc_en_flag = 0, transfer_spare_flag = 0;
+ int ecc_en_flag = 0, transfer_spare_flag = 0;
/* set ECC, transfer spare bits if needed */
ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
@@ -1119,15 +1119,15 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
denali_write32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
}
-/* sends a pipeline command operation to the controller. See the Denali NAND
- controller's user guide for more information (section 4.2.3.6).
+/* sends a pipeline command operation to the controller. See the Denali NAND
+ controller's user guide for more information (section 4.2.3.6).
*/
-static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en,
- bool transfer_spare, int access_type,
+static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en,
+ bool transfer_spare, int access_type,
int op)
{
int status = PASS;
- uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
+ uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
irq_mask = 0;
if (op == DENALI_READ) irq_mask = INTR_STATUS0__LOAD_COMP;
@@ -1145,32 +1145,32 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
/* clear interrupts */
- clear_interrupts(denali);
+ clear_interrupts(denali);
addr = BANK(denali->flash_bank) | denali->page;
if (op == DENALI_WRITE && access_type != SPARE_ACCESS)
{
- cmd = MODE_01 | addr;
+ cmd = MODE_01 | addr;
denali_write32(cmd, denali->flash_mem);
}
else if (op == DENALI_WRITE && access_type == SPARE_ACCESS)
{
/* read spare area */
- cmd = MODE_10 | addr;
+ cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, access_type);
- cmd = MODE_01 | addr;
+ cmd = MODE_01 | addr;
denali_write32(cmd, denali->flash_mem);
}
else if (op == DENALI_READ)
{
/* setup page read request for access type */
- cmd = MODE_10 | addr;
+ cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, access_type);
/* page 33 of the NAND controller spec indicates we should not
- use the pipeline commands in Spare area only mode. So we
+ use the pipeline commands in Spare area only mode. So we
don't.
*/
if (access_type == SPARE_ACCESS)
@@ -1181,8 +1181,8 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
else
{
index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count);
-
- /* wait for command to be accepted
+
+ /* wait for command to be accepted
* can always use status0 bit as the mask is identical for each
* bank. */
irq_status = wait_for_irq(denali, irq_mask);
@@ -1204,13 +1204,13 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
}
/* helper function that simply writes a buffer to the flash */
-static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf,
- int len)
+static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf,
+ int len)
{
uint32_t i = 0, *buf32;
- /* verify that the len is a multiple of 4. see comment in
- * read_data_from_flash_mem() */
+ /* verify that the len is a multiple of 4. see comment in
+ * read_data_from_flash_mem() */
BUG_ON((len % 4) != 0);
/* write the data to the flash memory */
@@ -1219,21 +1219,20 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_
{
denali_write32(*buf32++, denali->flash_mem + 0x10);
}
- return i*4; /* intent is to return the number of bytes read */
+ return i*4; /* intent is to return the number of bytes read */
}
/* helper function that simply reads a buffer from the flash */
-static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf,
+static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf,
int len)
{
uint32_t i = 0, *buf32;
/* we assume that len will be a multiple of 4, if not
* it would be nice to know about it ASAP rather than
- * have random failures...
- *
- * This assumption is based on the fact that this
- * function is designed to be used to read flash pages,
+ * have random failures...
+ * This assumption is based on the fact that this
+ * function is designed to be used to read flash pages,
* which are typically multiples of 4...
*/
@@ -1245,7 +1244,7 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *bu
{
*buf32++ = ioread32(denali->flash_mem + 0x10);
}
- return i*4; /* intent is to return the number of bytes read */
+ return i*4; /* intent is to return the number of bytes read */
}
/* writes OOB data to the device */
@@ -1253,14 +1252,14 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP |
+ uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP |
INTR_STATUS0__PROGRAM_FAIL;
int status = 0;
denali->page = page;
- if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
- DENALI_WRITE) == PASS)
+ if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
+ DENALI_WRITE) == PASS)
{
write_data_to_flash_mem(denali, buf, mtd->oobsize);
@@ -1271,7 +1270,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
spin_unlock_irq(&denali->irq_lock);
#endif
-
+
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
@@ -1281,10 +1280,10 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
status = -EIO;
}
}
- else
- {
+ else
+ {
printk(KERN_ERR "unable to send pipeline command\n");
- status = -EIO;
+ status = -EIO;
}
return status;
}
@@ -1300,12 +1299,12 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
#if DEBUG_DENALI
printk("read_oob %d\n", page);
#endif
- if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
- DENALI_READ) == PASS)
+ if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
+ DENALI_READ) == PASS)
{
- read_data_from_flash_mem(denali, buf, mtd->oobsize);
+ read_data_from_flash_mem(denali, buf, mtd->oobsize);
- /* wait for command to be accepted
+ /* wait for command to be accepted
* can always use status0 bit as the mask is identical for each
* bank. */
irq_status = wait_for_irq(denali, irq_mask);
@@ -1319,10 +1318,10 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
* instability with the controller if you do a block erase
* and the last transaction was a SPARE_ACCESS. Block erase
* is reliable (according to the MTD test infrastructure)
- * if you are in MAIN_ACCESS.
+ * if you are in MAIN_ACCESS.
*/
addr = BANK(denali->flash_bank) | denali->page;
- cmd = MODE_10 | addr;
+ cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
#if DEBUG_DENALI
@@ -1334,14 +1333,14 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
}
}
-/* this function examines buffers to see if they contain data that
+/* this function examines buffers to see if they contain data that
* indicate that the buffer is part of an erased region of flash.
*/
bool is_erased(uint8_t *buf, int len)
{
int i = 0;
for (i = 0; i < len; i++)
- {
+ {
if (buf[i] != 0xFF)
{
return false;
@@ -1358,7 +1357,7 @@ bool is_erased(uint8_t *buf, int len)
#define ECC_ERR_DEVICE(x) ((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8)
#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
-static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
+static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
uint8_t *oobbuf, uint32_t irq_status)
{
bool check_erased_page = false;
@@ -1370,27 +1369,27 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
uint32_t err_byte = 0, err_sector = 0, err_device = 0;
uint32_t err_correction_value = 0;
- do
+ do
{
- err_address = ioread32(denali->flash_reg +
+ err_address = ioread32(denali->flash_reg +
ECC_ERROR_ADDRESS);
err_sector = ECC_SECTOR(err_address);
err_byte = ECC_BYTE(err_address);
- err_correction_info = ioread32(denali->flash_reg +
+ err_correction_info = ioread32(denali->flash_reg +
ERR_CORRECTION_INFO);
- err_correction_value =
+ err_correction_value =
ECC_CORRECTION_VALUE(err_correction_info);
err_device = ECC_ERR_DEVICE(err_correction_info);
if (ECC_ERROR_CORRECTABLE(err_correction_info))
{
/* offset in our buffer is computed as:
- sector number * sector size + offset in
+ sector number * sector size + offset in
sector
*/
- int offset = err_sector * ECC_SECTOR_SIZE +
+ int offset = err_sector * ECC_SECTOR_SIZE +
err_byte;
if (offset < denali->mtd.writesize)
{
@@ -1407,15 +1406,15 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
}
else
{
- /* if the error is not correctable, need to
+ /* if the error is not correctable, need to
* look at the page to see if it is an erased page.
- * if so, then it's not a real ECC error */
+ * if so, then it's not a real ECC error */
check_erased_page = true;
}
-#if DEBUG_DENALI
+#if DEBUG_DENALI
printk("Detected ECC error in page %d: err_addr = 0x%08x,"
- " info to fix is 0x%08x\n", denali->page, err_address,
+ " info to fix is 0x%08x\n", denali->page, err_address,
err_correction_info);
#endif
} while (!ECC_LAST_ERR(err_correction_info));
@@ -1458,9 +1457,9 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
index_addr(denali, mode | 0x14000, 0x2400);
}
-/* writes a page. user specifies type, and this function handles the
+/* writes a page. user specifies type, and this function handles the
configuration details. */
-static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
+static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, bool raw_xfer)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
@@ -1470,7 +1469,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP |
+ uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP |
INTR_STATUS0__PROGRAM_FAIL;
/* if it is a raw xfer, we want to disable ecc, and send
@@ -1486,15 +1485,15 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
if (raw_xfer)
{
/* transfer the data to the spare area */
- memcpy(denali->buf.buf + mtd->writesize,
- chip->oob_poi,
- mtd->oobsize);
+ memcpy(denali->buf.buf + mtd->writesize,
+ chip->oob_poi,
+ mtd->oobsize);
}
pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE);
clear_interrupts(denali);
- denali_enable_dma(denali, true);
+ denali_enable_dma(denali, true);
denali_setup_dma(denali, DENALI_WRITE);
@@ -1504,53 +1503,53 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
if (irq_status == 0)
{
printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer);
- denali->status =
- (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL :
- PASS;
+ denali->status =
+ (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL :
+ PASS;
}
- denali_enable_dma(denali, false);
+ denali_enable_dma(denali, false);
pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE);
}
/* NAND core entry points */
-/* this is the callback that the NAND core calls to write a page. Since
- writing a page with ECC or without is similar, all the work is done
+/* this is the callback that the NAND core calls to write a page. Since
+ writing a page with ECC or without is similar, all the work is done
by write_page above. */
-static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
{
/* for regular page writes, we let HW handle all the ECC
- * data written to the device. */
+ * data written to the device. */
write_page(mtd, chip, buf, false);
}
-/* This is the callback that the NAND core calls to write a page without ECC.
+/* This is the callback that the NAND core calls to write a page without ECC.
raw access is similiar to ECC page writes, so all the work is done in the
- write_page() function above.
+ write_page() function above.
*/
-static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
{
- /* for raw page writes, we want to disable ECC and simply write
+ /* for raw page writes, we want to disable ECC and simply write
whatever data is in the buffer. */
write_page(mtd, chip, buf, true);
}
-static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
- return write_oob_data(mtd, chip->oob_poi, page);
+ return write_oob_data(mtd, chip->oob_poi, page);
}
-static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
{
read_oob_data(mtd, chip->oob_poi, page);
- return 0; /* notify NAND core to send command to
- * NAND device. */
+ return 0; /* notify NAND core to send command to
+ NAND device. */
}
static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
@@ -1563,7 +1562,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE |
+ uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE |
INTR_STATUS0__ECC_ERR;
bool check_erased_page = false;
@@ -1581,7 +1580,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
memcpy(buf, denali->buf.buf, mtd->writesize);
-
+
check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status);
denali_enable_dma(denali, false);
@@ -1600,7 +1599,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
{
denali->mtd.ecc_stats.failed++;
}
- }
+ }
}
return 0;
}
@@ -1616,7 +1615,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t irq_status = 0;
uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP;
-
+
setup_ecc_for_xfer(denali, false, true);
denali_enable_dma(denali, true);
@@ -1687,21 +1686,21 @@ static void denali_erase(struct mtd_info *mtd, int page)
printk("erase page: %d\n", page);
#endif
/* clear interrupts */
- clear_interrupts(denali);
+ clear_interrupts(denali);
/* setup page read request for access type */
cmd = MODE_10 | BANK(denali->flash_bank) | page;
index_addr(denali, (uint32_t)cmd, 0x1);
/* wait for erase to complete or failure to occur */
- irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP |
+ irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP |
INTR_STATUS0__ERASE_FAIL);
- denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? NAND_STATUS_FAIL :
+ denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? NAND_STATUS_FAIL :
PASS;
}
-static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
+static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
@@ -1710,7 +1709,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
printk("cmdfunc: 0x%x %d %d\n", cmd, col, page);
#endif
switch (cmd)
- {
+ {
case NAND_CMD_PAGEPROG:
break;
case NAND_CMD_STATUS:
@@ -1720,19 +1719,19 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
reset_buf(denali);
if (denali->flash_bank < denali->total_used_banks)
{
- /* write manufacturer information into nand
+ /* write manufacturer information into nand
buffer for NAND subsystem to fetch.
- */
- write_byte_to_buf(denali, denali->dev_info.wDeviceMaker);
- write_byte_to_buf(denali, denali->dev_info.wDeviceID);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam0);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam1);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam2);
+ */
+ write_byte_to_buf(denali, denali->dev_info.wDeviceMaker);
+ write_byte_to_buf(denali, denali->dev_info.wDeviceID);
+ write_byte_to_buf(denali, denali->dev_info.bDeviceParam0);
+ write_byte_to_buf(denali, denali->dev_info.bDeviceParam1);
+ write_byte_to_buf(denali, denali->dev_info.bDeviceParam2);
}
- else
+ else
{
int i;
- for (i = 0; i < 5; i++)
+ for (i = 0; i < 5; i++)
write_byte_to_buf(denali, 0xff);
}
break;
@@ -1753,7 +1752,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
}
/* stubs for ECC functions not used by the NAND core */
-static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
+static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc_code)
{
printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n");
@@ -1761,7 +1760,7 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
return -EIO;
}
-static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
+static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
printk(KERN_ERR "denali_ecc_correct called unexpectedly\n");
@@ -1797,9 +1796,9 @@ static void denali_hw_init(struct denali_nand_info *denali)
static struct nand_ecclayout nand_oob_slc = {
.eccbytes = 4,
.eccpos = { 0, 1, 2, 3 }, /* not used */
- .oobfree = {{
- .offset = ECC_BYTES_SLC,
- .length = 64 - ECC_BYTES_SLC
+ .oobfree = {{
+ .offset = ECC_BYTES_SLC,
+ .length = 64 - ECC_BYTES_SLC
}}
};
@@ -1807,9 +1806,9 @@ static struct nand_ecclayout nand_oob_slc = {
static struct nand_ecclayout nand_oob_mlc_14bit = {
.eccbytes = 14,
.eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */
- .oobfree = {{
- .offset = ECC_BYTES_MLC,
- .length = 64 - ECC_BYTES_MLC
+ .oobfree = {{
+ .offset = ECC_BYTES_MLC,
+ .length = 64 - ECC_BYTES_MLC
}}
};
@@ -1842,12 +1841,12 @@ void denali_drv_init(struct denali_nand_info *denali)
denali->idx = 0;
/* setup interrupt handler */
- /* the completion object will be used to notify
+ /* the completion object will be used to notify
* the callee that the interrupt is done */
init_completion(&denali->complete);
/* the spinlock will be used to synchronize the ISR
- * with any element that might be access shared
+ * with any element that might be access shared
* data (interrupt status) */
spin_lock_init(&denali->irq_lock);
@@ -1880,9 +1879,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
}
if (id->driver_data == INTEL_CE4100) {
- /* Due to a silicon limitation, we can only support
- * ONFI timing mode 1 and below.
- */
+ /* Due to a silicon limitation, we can only support
+ * ONFI timing mode 1 and below.
+ */
if (onfi_timing_mode < -1 || onfi_timing_mode > 1)
{
printk("Intel CE4100 only supports ONFI timing mode 1 "
@@ -1918,7 +1917,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
printk(KERN_ERR "Spectra: no usable DMA configuration\n");
goto failed_enable;
}
- denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE,
+ denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE,
PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(dev, denali->buf.dma_buf))
@@ -1976,8 +1975,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
NAND_Read_Device_ID(denali);
- /* MTD supported page sizes vary by kernel. We validate our
- kernel supports the device here.
+ /* MTD supported page sizes vary by kernel. We validate our
+ * kernel supports the device here.
*/
if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
{
@@ -2009,18 +2008,18 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.read_byte = denali_read_byte;
denali->nand.waitfunc = denali_waitfunc;
- /* scan for NAND devices attached to the controller
+ /* scan for NAND devices attached to the controller
* this is the first stage in a two step process to register
- * with the nand subsystem */
+ * with the nand subsystem */
if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL))
{
ret = -ENXIO;
goto failed_nand;
}
-
- /* second stage of the NAND scan
- * this stage requires information regarding ECC and
- * bad block management. */
+
+ /* second stage of the NAND scan
+ * this stage requires information regarding ECC and
+ * bad block management. */
/* Bad block management */
denali->nand.bbt_td = &bbt_main_descr;
@@ -2041,9 +2040,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.ecc.bytes = ECC_BYTES_SLC;
}
- /* These functions are required by the NAND core framework, otherwise,
- the NAND core will assert. However, we don't need them, so we'll stub
- them out. */
+ /* These functions are required by the NAND core framework, otherwise,
+ * the NAND core will assert. However, we don't need them, so we'll stub
+ * them out. */
denali->nand.ecc.calculate = denali_ecc_calculate;
denali->nand.ecc.correct = denali_ecc_correct;
denali->nand.ecc.hwctl = denali_ecc_hwctl;
@@ -2079,7 +2078,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
failed_remap_csr:
pci_release_regions(dev);
failed_req_csr:
- pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
PCI_DMA_BIDIRECTIONAL);
failed_enable:
kfree(denali);
@@ -2103,7 +2102,7 @@ static void denali_pci_remove(struct pci_dev *dev)
iounmap(denali->flash_mem);
pci_release_regions(dev);
pci_disable_device(dev);
- pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
PCI_DMA_BIDIRECTIONAL);
pci_set_drvdata(dev, NULL);
kfree(denali);
--
GitLab
From 345b1d3b46fa1b7b2bf5d27bef6ea4c4dbf08731 Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Tue, 27 Jul 2010 10:41:53 +0800
Subject: [PATCH 227/863] mtd: denali.c: fixed all open brace { check-patch
errors
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 164 +++++++++++---------------------------
1 file changed, 48 insertions(+), 116 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ca02838a420ef..f850a6516bc98 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -211,9 +211,7 @@ static void reset_bank(struct denali_nand_info *denali)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status & operation_timeout[denali->flash_bank])
- {
printk(KERN_ERR "reset bank failed.\n");
- }
}
/* Reset the flash controller */
@@ -637,14 +635,12 @@ static void find_valid_banks(struct denali_nand_info *denali)
}
}
- if (denali->platform == INTEL_CE4100)
- {
+ if (denali->platform == INTEL_CE4100) {
/* Platform limitations of the CE4100 device limit
* users to a single chip solution for NAND.
* Multichip support is not enabled.
*/
- if (denali->total_used_banks != 1)
- {
+ if (denali->total_used_banks != 1) {
printk(KERN_ERR "Sorry, Intel CE4100 only supports "
"a single NAND device.\n");
BUG();
@@ -888,9 +884,7 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
* with a specific ONFI mode, we apply those changes here.
*/
if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
- {
NAND_ONFi_Timing_Mode(denali, onfi_timing_mode);
- }
return status;
}
@@ -997,9 +991,7 @@ static void print_irq_log(struct denali_nand_info *denali)
printk("ISR debug log index = %X\n", denali->idx);
for (i = 0; i < 32; i++)
- {
printk("%08X: %08X\n", i, denali->irq_debug_array[i]);
- }
}
#endif
@@ -1018,12 +1010,10 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
/* check to see if a valid NAND chip has
* been selected.
*/
- if (is_flash_bank_valid(denali->flash_bank))
- {
+ if (is_flash_bank_valid(denali->flash_bank)) {
/* check to see if controller generated
* the interrupt, since this is a shared interrupt */
- if ((irq_status = denali_irq_detected(denali)) != 0)
- {
+ if ((irq_status = denali_irq_detected(denali)) != 0) {
#if DEBUG_DENALI
denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status;
denali->idx %= 32;
@@ -1054,8 +1044,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
bool retry = false;
unsigned long timeout = msecs_to_jiffies(1000);
- do
- {
+ do {
#if DEBUG_DENALI
printk("waiting for 0x%x\n", irq_mask);
#endif
@@ -1068,8 +1057,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
denali->idx %= 32;
#endif
- if (intr_status & irq_mask)
- {
+ if (intr_status & irq_mask) {
denali->irq_status &= ~irq_mask;
spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
@@ -1077,9 +1065,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
#endif
/* our interrupt was detected */
break;
- }
- else
- {
+ } else {
/* these are not the interrupts you are looking for -
* need to wait again */
spin_unlock_irq(&denali->irq_lock);
@@ -1092,8 +1078,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
}
} while (comp_res != 0);
- if (comp_res == 0)
- {
+ if (comp_res == 0) {
/* timeout */
printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
intr_status, irq_mask);
@@ -1149,22 +1134,17 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
addr = BANK(denali->flash_bank) | denali->page;
- if (op == DENALI_WRITE && access_type != SPARE_ACCESS)
- {
+ if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
cmd = MODE_01 | addr;
denali_write32(cmd, denali->flash_mem);
- }
- else if (op == DENALI_WRITE && access_type == SPARE_ACCESS)
- {
+ } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
/* read spare area */
cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, access_type);
cmd = MODE_01 | addr;
denali_write32(cmd, denali->flash_mem);
- }
- else if (op == DENALI_READ)
- {
+ } else if (op == DENALI_READ) {
/* setup page read request for access type */
cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, access_type);
@@ -1173,13 +1153,10 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
use the pipeline commands in Spare area only mode. So we
don't.
*/
- if (access_type == SPARE_ACCESS)
- {
+ if (access_type == SPARE_ACCESS) {
cmd = MODE_01 | addr;
denali_write32(cmd, denali->flash_mem);
- }
- else
- {
+ } else {
index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count);
/* wait for command to be accepted
@@ -1187,14 +1164,11 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
* bank. */
irq_status = wait_for_irq(denali, irq_mask);
- if (irq_status == 0)
- {
+ if (irq_status == 0) {
printk(KERN_ERR "cmd, page, addr on timeout "
"(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr);
status = FAIL;
- }
- else
- {
+ } else {
cmd = MODE_01 | addr;
denali_write32(cmd, denali->flash_mem);
}
@@ -1216,9 +1190,7 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_
/* write the data to the flash memory */
buf32 = (uint32_t *)buf;
for (i = 0; i < len / 4; i++)
- {
denali_write32(*buf32++, denali->flash_mem + 0x10);
- }
return i*4; /* intent is to return the number of bytes read */
}
@@ -1241,9 +1213,7 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *bu
/* transfer the data from the flash */
buf32 = (uint32_t *)buf;
for (i = 0; i < len / 4; i++)
- {
*buf32++ = ioread32(denali->flash_mem + 0x10);
- }
return i*4; /* intent is to return the number of bytes read */
}
@@ -1259,8 +1229,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
denali->page = page;
if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
- DENALI_WRITE) == PASS)
- {
+ DENALI_WRITE) == PASS) {
write_data_to_flash_mem(denali, buf, mtd->oobsize);
#if DEBUG_DENALI
@@ -1274,14 +1243,11 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
- if (irq_status == 0)
- {
+ if (irq_status == 0) {
printk(KERN_ERR "OOB write failed\n");
status = -EIO;
}
- }
- else
- {
+ } else {
printk(KERN_ERR "unable to send pipeline command\n");
status = -EIO;
}
@@ -1300,8 +1266,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
printk("read_oob %d\n", page);
#endif
if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
- DENALI_READ) == PASS)
- {
+ DENALI_READ) == PASS) {
read_data_from_flash_mem(denali, buf, mtd->oobsize);
/* wait for command to be accepted
@@ -1310,9 +1275,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0)
- {
printk(KERN_ERR "page on OOB timeout %d\n", denali->page);
- }
/* We set the device back to MAIN_ACCESS here as I observed
* instability with the controller if you do a block erase
@@ -1340,12 +1303,8 @@ bool is_erased(uint8_t *buf, int len)
{
int i = 0;
for (i = 0; i < len; i++)
- {
if (buf[i] != 0xFF)
- {
return false;
- }
- }
return true;
}
#define ECC_SECTOR_SIZE 512
@@ -1362,15 +1321,13 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
{
bool check_erased_page = false;
- if (irq_status & INTR_STATUS0__ECC_ERR)
- {
+ if (irq_status & INTR_STATUS0__ECC_ERR) {
/* read the ECC errors. we'll ignore them for now */
uint32_t err_address = 0, err_correction_info = 0;
uint32_t err_byte = 0, err_sector = 0, err_device = 0;
uint32_t err_correction_value = 0;
- do
- {
+ do {
err_address = ioread32(denali->flash_reg +
ECC_ERROR_ADDRESS);
err_sector = ECC_SECTOR(err_address);
@@ -1383,29 +1340,23 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
ECC_CORRECTION_VALUE(err_correction_info);
err_device = ECC_ERR_DEVICE(err_correction_info);
- if (ECC_ERROR_CORRECTABLE(err_correction_info))
- {
+ if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
/* offset in our buffer is computed as:
sector number * sector size + offset in
sector
*/
int offset = err_sector * ECC_SECTOR_SIZE +
err_byte;
- if (offset < denali->mtd.writesize)
- {
+ if (offset < denali->mtd.writesize) {
/* correct the ECC error */
buf[offset] ^= err_correction_value;
denali->mtd.ecc_stats.corrected++;
- }
- else
- {
+ } else {
/* bummer, couldn't correct the error */
printk(KERN_ERR "ECC offset invalid\n");
denali->mtd.ecc_stats.failed++;
}
- }
- else
- {
+ } else {
/* if the error is not correctable, need to
* look at the page to see if it is an erased page.
* if so, then it's not a real ECC error */
@@ -1482,8 +1433,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
/* copy buffer into DMA buffer */
memcpy(denali->buf.buf, buf, mtd->writesize);
- if (raw_xfer)
- {
+ if (raw_xfer) {
/* transfer the data to the spare area */
memcpy(denali->buf.buf + mtd->writesize,
chip->oob_poi,
@@ -1500,8 +1450,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
- if (irq_status == 0)
- {
+ if (irq_status == 0) {
printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer);
denali->status =
(irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL :
@@ -1584,21 +1533,15 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status);
denali_enable_dma(denali, false);
- if (check_erased_page)
- {
+ if (check_erased_page) {
read_oob_data(&denali->mtd, chip->oob_poi, denali->page);
/* check ECC failures that may have occurred on erased pages */
- if (check_erased_page)
- {
+ if (check_erased_page) {
if (!is_erased(buf, denali->mtd.writesize))
- {
denali->mtd.ecc_stats.failed++;
- }
if (!is_erased(buf, denali->mtd.oobsize))
- {
denali->mtd.ecc_stats.failed++;
- }
}
}
return 0;
@@ -1643,9 +1586,7 @@ static uint8_t denali_read_byte(struct mtd_info *mtd)
uint8_t result = 0xff;
if (denali->buf.head < denali->buf.tail)
- {
result = denali->buf.buf[denali->buf.head++];
- }
#if DEBUG_DENALI
printk("read byte -> 0x%02x\n", result);
@@ -1708,8 +1649,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
#if DEBUG_DENALI
printk("cmdfunc: 0x%x %d %d\n", cmd, col, page);
#endif
- switch (cmd)
- {
+ switch (cmd) {
case NAND_CMD_PAGEPROG:
break;
case NAND_CMD_STATUS:
@@ -1717,8 +1657,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
break;
case NAND_CMD_READID:
reset_buf(denali);
- if (denali->flash_bank < denali->total_used_banks)
- {
+ if (denali->flash_bank < denali->total_used_banks) {
/* write manufacturer information into nand
buffer for NAND subsystem to fetch.
*/
@@ -1727,9 +1666,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
write_byte_to_buf(denali, denali->dev_info.bDeviceParam0);
write_byte_to_buf(denali, denali->dev_info.bDeviceParam1);
write_byte_to_buf(denali, denali->dev_info.bDeviceParam2);
- }
- else
- {
+ } else {
int i;
for (i = 0; i < 5; i++)
write_byte_to_buf(denali, 0xff);
@@ -1796,20 +1733,24 @@ static void denali_hw_init(struct denali_nand_info *denali)
static struct nand_ecclayout nand_oob_slc = {
.eccbytes = 4,
.eccpos = { 0, 1, 2, 3 }, /* not used */
- .oobfree = {{
+ .oobfree = {
+ {
.offset = ECC_BYTES_SLC,
.length = 64 - ECC_BYTES_SLC
- }}
+ }
+ }
};
#define ECC_BYTES_MLC 14 * (2048 / ECC_SECTOR_SIZE)
static struct nand_ecclayout nand_oob_mlc_14bit = {
.eccbytes = 14,
.eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */
- .oobfree = {{
+ .oobfree = {
+ {
.offset = ECC_BYTES_MLC,
.length = 64 - ECC_BYTES_MLC
- }}
+ }
+ }
};
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -1882,8 +1823,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Due to a silicon limitation, we can only support
* ONFI timing mode 1 and below.
*/
- if (onfi_timing_mode < -1 || onfi_timing_mode > 1)
- {
+ if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
printk("Intel CE4100 only supports ONFI timing mode 1 "
"or below\n");
ret = -EINVAL;
@@ -1912,16 +1852,14 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Is 32-bit DMA supported? */
ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
- if (ret)
- {
+ if (ret) {
printk(KERN_ERR "Spectra: no usable DMA configuration\n");
goto failed_enable;
}
denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE,
PCI_DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(dev, denali->buf.dma_buf))
- {
+ if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {
printk(KERN_ERR "Spectra: failed to map DMA buffer\n");
goto failed_enable;
}
@@ -1978,8 +1916,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* MTD supported page sizes vary by kernel. We validate our
* kernel supports the device here.
*/
- if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
- {
+ if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
ret = -ENODEV;
printk(KERN_ERR "Spectra: device size not supported by this "
"version of MTD.");
@@ -2011,8 +1948,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* scan for NAND devices attached to the controller
* this is the first stage in a two step process to register
* with the nand subsystem */
- if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL))
- {
+ if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) {
ret = -ENXIO;
goto failed_nand;
}
@@ -2029,13 +1965,10 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
- if (denali->dev_info.MLCDevice)
- {
+ if (denali->dev_info.MLCDevice) {
denali->nand.ecc.layout = &nand_oob_mlc_14bit;
denali->nand.ecc.bytes = ECC_BYTES_MLC;
- }
- else /* SLC */
- {
+ } else {/* SLC */
denali->nand.ecc.layout = &nand_oob_slc;
denali->nand.ecc.bytes = ECC_BYTES_SLC;
}
@@ -2057,8 +1990,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.ecc.write_oob = denali_write_oob;
denali->nand.erase_cmd = denali_erase;
- if (nand_scan_tail(&denali->mtd))
- {
+ if (nand_scan_tail(&denali->mtd)) {
ret = -ENXIO;
goto failed_nand;
}
--
GitLab
From bf1806ddee9a872a70dfe403fa591328edd3ea5d Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Tue, 27 Jul 2010 10:48:34 +0800
Subject: [PATCH 228/863] mtd: denali.c: add and update KERN_ facility level in
printk()
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index f850a6516bc98..55a7a39401138 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -138,7 +138,7 @@ static void denali_write32(uint32_t value, void *addr)
iowrite32(value, addr);
#if DEBUG_DENALI
- printk(KERN_ERR "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
+ printk(KERN_INFO "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
#endif
}
@@ -191,7 +191,7 @@ static void read_status(struct denali_nand_info *denali)
write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
#if DEBUG_DENALI
- printk("device reporting status value of 0x%2x\n", denali->buf.buf[0]);
+ printk(KERN_INFO "device reporting status value of 0x%2x\n", denali->buf.buf[0]);
#endif
}
@@ -989,9 +989,9 @@ static void print_irq_log(struct denali_nand_info *denali)
{
int i = 0;
- printk("ISR debug log index = %X\n", denali->idx);
+ printk(KERN_INFO "ISR debug log index = %X\n", denali->idx);
for (i = 0; i < 32; i++)
- printk("%08X: %08X\n", i, denali->irq_debug_array[i]);
+ printk(KERN_INFO "%08X: %08X\n", i, denali->irq_debug_array[i]);
}
#endif
@@ -1018,7 +1018,7 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status;
denali->idx %= 32;
- printk("IRQ status = 0x%04x\n", irq_status);
+ printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status);
#endif
/* handle interrupt */
/* first acknowledge it */
@@ -1046,7 +1046,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
do {
#if DEBUG_DENALI
- printk("waiting for 0x%x\n", irq_mask);
+ printk(KERN_INFO "waiting for 0x%x\n", irq_mask);
#endif
comp_res = wait_for_completion_timeout(&denali->complete, timeout);
spin_lock_irq(&denali->irq_lock);
@@ -1061,7 +1061,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
denali->irq_status &= ~irq_mask;
spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
- if (retry) printk("status on retry = 0x%x\n", intr_status);
+ if (retry) printk(KERN_INFO "status on retry = 0x%x\n", intr_status);
#endif
/* our interrupt was detected */
break;
@@ -1071,7 +1071,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
print_irq_log(denali);
- printk("received irq nobody cared: irq_status = 0x%x,"
+ printk(KERN_INFO "received irq nobody cared: irq_status = 0x%x,"
" irq_mask = 0x%x, timeout = %ld\n", intr_status, irq_mask, comp_res);
#endif
retry = true;
@@ -1263,7 +1263,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
denali->page = page;
#if DEBUG_DENALI
- printk("read_oob %d\n", page);
+ printk(KERN_INFO "read_oob %d\n", page);
#endif
if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
DENALI_READ) == PASS) {
@@ -1364,7 +1364,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
}
#if DEBUG_DENALI
- printk("Detected ECC error in page %d: err_addr = 0x%08x,"
+ printk(KERN_INFO "Detected ECC error in page %d: err_addr = 0x%08x,"
" info to fix is 0x%08x\n", denali->page, err_address,
err_correction_info);
#endif
@@ -1589,7 +1589,7 @@ static uint8_t denali_read_byte(struct mtd_info *mtd)
result = denali->buf.buf[denali->buf.head++];
#if DEBUG_DENALI
- printk("read byte -> 0x%02x\n", result);
+ printk(KERN_INFO "read byte -> 0x%02x\n", result);
#endif
return result;
}
@@ -1598,7 +1598,7 @@ static void denali_select_chip(struct mtd_info *mtd, int chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
#if DEBUG_DENALI
- printk("denali select chip %d\n", chip);
+ printk(KERN_INFO "denali select chip %d\n", chip);
#endif
spin_lock_irq(&denali->irq_lock);
denali->flash_bank = chip;
@@ -1612,7 +1612,7 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
denali->status = 0;
#if DEBUG_DENALI
- printk("waitfunc %d\n", status);
+ printk(KERN_INFO "waitfunc %d\n", status);
#endif
return status;
}
@@ -1624,7 +1624,7 @@ static void denali_erase(struct mtd_info *mtd, int page)
uint32_t cmd = 0x0, irq_status = 0;
#if DEBUG_DENALI
- printk("erase page: %d\n", page);
+ printk(KERN_INFO "erase page: %d\n", page);
#endif
/* clear interrupts */
clear_interrupts(denali);
@@ -1647,7 +1647,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
struct denali_nand_info *denali = mtd_to_denali(mtd);
#if DEBUG_DENALI
- printk("cmdfunc: 0x%x %d %d\n", cmd, col, page);
+ printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page);
#endif
switch (cmd) {
case NAND_CMD_PAGEPROG:
@@ -1824,7 +1824,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
* ONFI timing mode 1 and below.
*/
if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
- printk("Intel CE4100 only supports ONFI timing mode 1 "
+ printk(KERN_ERR "Intel CE4100 only supports ONFI timing mode 1 "
"or below\n");
ret = -EINVAL;
goto failed_enable;
--
GitLab
From bdca6daee20daf9c14f272fe1ab07990e881e518 Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Tue, 27 Jul 2010 11:28:09 +0800
Subject: [PATCH 229/863] mtd: denali.c: fix all "line over 80 characters"
warnings
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 300 ++++++++++++++++++++++++--------------
1 file changed, 192 insertions(+), 108 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 55a7a39401138..3ce11cc69721d 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -36,8 +36,8 @@ MODULE_LICENSE("GPL");
static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
module_param(onfi_timing_mode, int, S_IRUGO);
-MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates"
- " use default timings");
+MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
+ " -1 indicates use default timings");
#define DENALI_NAND_NAME "denali-nand"
@@ -123,8 +123,10 @@ static int nand_debug_level = 0;
/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
-static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask);
-static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask);
+static uint32_t wait_for_irq(struct denali_nand_info *denali,
+ uint32_t irq_mask);
+static void denali_irq_enable(struct denali_nand_info *denali,
+ uint32_t int_mask);
static uint32_t read_interrupt_status(struct denali_nand_info *denali);
#define DEBUG_DENALI 0
@@ -138,16 +140,19 @@ static void denali_write32(uint32_t value, void *addr)
iowrite32(value, addr);
#if DEBUG_DENALI
- printk(KERN_INFO "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
+ printk(KERN_INFO "wrote: 0x%x -> 0x%x\n", value,
+ (uint32_t)((uint32_t)addr & 0x1fff));
#endif
}
-/* Certain operations for the denali NAND controller use an indexed mode to read/write
- data. The operation is performed by writing the address value of the command to
- the device memory followed by the data. This function abstracts this common
- operation.
+/* Certain operations for the denali NAND controller use
+ * an indexed mode to read/write data. The operation is
+ * performed by writing the address value of the command
+ * to the device memory followed by the data. This function
+ * abstracts this common operation.
*/
-static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data)
+static void index_addr(struct denali_nand_info *denali,
+ uint32_t address, uint32_t data)
{
denali_write32(address, denali->flash_mem);
denali_write32(data, denali->flash_mem + 0x10);
@@ -191,7 +196,8 @@ static void read_status(struct denali_nand_info *denali)
write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
#if DEBUG_DENALI
- printk(KERN_INFO "device reporting status value of 0x%2x\n", denali->buf.buf[0]);
+ printk(KERN_INFO "device reporting status value of 0x%2x\n",
+ denali->buf.buf[0]);
#endif
}
@@ -227,8 +233,10 @@ static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
denali->flash_reg + intr_status_addresses[i]);
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
- denali_write32(device_reset_banks[i], denali->flash_reg + DEVICE_RESET);
- while (!(ioread32(denali->flash_reg + intr_status_addresses[i]) &
+ denali_write32(device_reset_banks[i],
+ denali->flash_reg + DEVICE_RESET);
+ while (!(ioread32(denali->flash_reg +
+ intr_status_addresses[i]) &
(reset_complete[i] | operation_timeout[i])))
;
if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
@@ -244,11 +252,12 @@ static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
return PASS;
}
-/* this routine calculates the ONFI timing values for a given mode and programs
- * the clocking register accordingly. The mode is determined by the get_onfi_nand_para
- routine.
+/* this routine calculates the ONFI timing values for a given mode and
+ * programs the clocking register accordingly. The mode is determined by
+ * the get_onfi_nand_para routine.
*/
-static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode)
+static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali,
+ uint16_t mode)
{
uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
uint16_t Trp[6] = {50, 25, 17, 15, 12, 10};
@@ -354,10 +363,11 @@ static void set_ecc_config(struct denali_nand_info *denali)
denali_write32(8, denali->flash_reg + ECC_CORRECTION);
#endif
- if ((ioread32(denali->flash_reg + ECC_CORRECTION) & ECC_CORRECTION__VALUE)
- == 1) {
+ if ((ioread32(denali->flash_reg + ECC_CORRECTION) &
+ ECC_CORRECTION__VALUE) == 1) {
denali->dev_info.wECCBytesPerSector = 4;
- denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
+ denali->dev_info.wECCBytesPerSector *=
+ denali->dev_info.wDevicesConnected;
denali->dev_info.wNumPageSpareFlag =
denali->dev_info.wPageSpareSize -
denali->dev_info.wPageDataSize /
@@ -373,8 +383,10 @@ static void set_ecc_config(struct denali_nand_info *denali)
else
denali->dev_info.wECCBytesPerSector += 1;
- denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
- denali->dev_info.wNumPageSpareFlag = denali->dev_info.wPageSpareSize -
+ denali->dev_info.wECCBytesPerSector *=
+ denali->dev_info.wDevicesConnected;
+ denali->dev_info.wNumPageSpareFlag =
+ denali->dev_info.wPageSpareSize -
denali->dev_info.wPageDataSize /
(ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
denali->dev_info.wECCBytesPerSector
@@ -392,13 +404,15 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET);
while (!((ioread32(denali->flash_reg + INTR_STATUS0) &
- INTR_STATUS0__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS0) &
- INTR_STATUS0__TIME_OUT)))
+ INTR_STATUS0__RST_COMP) |
+ (ioread32(denali->flash_reg + INTR_STATUS0) &
+ INTR_STATUS0__TIME_OUT)))
;
- if (ioread32(denali->flash_reg + INTR_STATUS0) & INTR_STATUS0__RST_COMP) {
- denali_write32(DEVICE_RESET__BANK1, denali->flash_reg + DEVICE_RESET);
+ if (ioread32(denali->flash_reg + INTR_STATUS0) &
+ INTR_STATUS0__RST_COMP) {
+ denali_write32(DEVICE_RESET__BANK1,
+ denali->flash_reg + DEVICE_RESET);
while (!((ioread32(denali->flash_reg + INTR_STATUS1) &
INTR_STATUS1__RST_COMP) |
(ioread32(denali->flash_reg + INTR_STATUS1) &
@@ -419,10 +433,12 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
INTR_STATUS2__RST_COMP) {
denali_write32(DEVICE_RESET__BANK3,
denali->flash_reg + DEVICE_RESET);
- while (!((ioread32(denali->flash_reg + INTR_STATUS3) &
- INTR_STATUS3__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS3) &
- INTR_STATUS3__TIME_OUT)))
+ while (!((ioread32(denali->flash_reg +
+ INTR_STATUS3) &
+ INTR_STATUS3__RST_COMP) |
+ (ioread32(denali->flash_reg +
+ INTR_STATUS3) &
+ INTR_STATUS3__TIME_OUT)))
;
} else {
printk(KERN_ERR "Getting a time out for bank 2!\n");
@@ -432,10 +448,14 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
}
}
- denali_write32(INTR_STATUS0__TIME_OUT, denali->flash_reg + INTR_STATUS0);
- denali_write32(INTR_STATUS1__TIME_OUT, denali->flash_reg + INTR_STATUS1);
- denali_write32(INTR_STATUS2__TIME_OUT, denali->flash_reg + INTR_STATUS2);
- denali_write32(INTR_STATUS3__TIME_OUT, denali->flash_reg + INTR_STATUS3);
+ denali_write32(INTR_STATUS0__TIME_OUT,
+ denali->flash_reg + INTR_STATUS0);
+ denali_write32(INTR_STATUS1__TIME_OUT,
+ denali->flash_reg + INTR_STATUS1);
+ denali_write32(INTR_STATUS2__TIME_OUT,
+ denali->flash_reg + INTR_STATUS2);
+ denali_write32(INTR_STATUS3__TIME_OUT,
+ denali->flash_reg + INTR_STATUS3);
denali->dev_info.wONFIDevFeatures =
ioread32(denali->flash_reg + ONFI_DEVICE_FEATURES);
@@ -448,8 +468,10 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
n_of_luns = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
- blks_lun_l = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
- blks_lun_h = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
+ blks_lun_l = ioread32(denali->flash_reg +
+ ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
+ blks_lun_h = ioread32(denali->flash_reg +
+ ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
blockperlun = (blks_lun_h << 16) | blks_lun_l;
@@ -460,7 +482,8 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
return FAIL;
for (i = 5; i > 0; i--) {
- if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & (0x01 << i))
+ if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
+ (0x01 << i))
break;
}
@@ -495,7 +518,8 @@ static void get_samsung_nand_para(struct denali_nand_info *denali)
index_addr(denali, (uint32_t)(MODE_11 | 0), 0x90);
index_addr(denali, (uint32_t)(MODE_11 | 1), 0);
for (i = 0; i < 5; i++)
- index_addr_read_data(denali, (uint32_t)(MODE_11 | 2), &id_bytes[i]);
+ index_addr_read_data(denali, (uint32_t)(MODE_11 | 2),
+ &id_bytes[i]);
nand_dbg_print(NAND_DBG_DEBUG,
"ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
@@ -515,7 +539,8 @@ static void get_samsung_nand_para(struct denali_nand_info *denali)
no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
plane_size = (uint64_t)64 << ((id_bytes[4] & 0x70) >> 4);
- blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) & 0x30) >> 4);
+ blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) &
+ 0x30) >> 4);
capacity = (uint64_t)128 * plane_size * no_of_planes;
do_div(capacity, blk_size);
@@ -534,7 +559,8 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
denali_write32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) *
ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- denali_write32(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+ denali_write32(tmp,
+ denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
#if SUPPORT_15BITECC
denali_write32(15, denali->flash_reg + ECC_CORRECTION);
#elif SUPPORT_8BITECC
@@ -573,10 +599,14 @@ static void get_hynix_nand_para(struct denali_nand_info *denali)
denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK);
denali_write32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
denali_write32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- main_size = 4096 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
- spare_size = 224 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
- denali_write32(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
- denali_write32(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+ main_size = 4096 *
+ ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ spare_size = 224 *
+ ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ denali_write32(main_size,
+ denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
+ denali_write32(spare_size,
+ denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
denali_write32(0, denali->flash_reg + DEVICE_WIDTH);
#if SUPPORT_15BITECC
denali_write32(15, denali->flash_reg + ECC_CORRECTION);
@@ -619,7 +649,8 @@ static void find_valid_banks(struct denali_nand_info *denali)
for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) {
index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
- index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
+ index_addr_read_data(denali,
+ (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
nand_dbg_print(NAND_DBG_DEBUG,
"Return 1st ID for bank[%d]: %x\n", i, id[i]);
@@ -671,7 +702,8 @@ static void detect_partition_feature(struct denali_nand_info *denali)
(ioread32(denali->flash_reg + MAX_BLK_ADDR_1) &
MAX_BLK_ADDR_1__VALUE);
- denali->dev_info.wTotalBlocks *= denali->total_used_banks;
+ denali->dev_info.wTotalBlocks *=
+ denali->total_used_banks;
if (denali->dev_info.wSpectraEndBlock >=
denali->dev_info.wTotalBlocks) {
@@ -683,8 +715,10 @@ static void detect_partition_feature(struct denali_nand_info *denali)
denali->dev_info.wSpectraEndBlock -
denali->dev_info.wSpectraStartBlock + 1;
} else {
- denali->dev_info.wTotalBlocks *= denali->total_used_banks;
- denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
+ denali->dev_info.wTotalBlocks *=
+ denali->total_used_banks;
+ denali->dev_info.wSpectraStartBlock =
+ SPECTRA_START_BLOCK;
denali->dev_info.wSpectraEndBlock =
denali->dev_info.wTotalBlocks - 1;
denali->dev_info.wDataBlockNum =
@@ -694,7 +728,8 @@ static void detect_partition_feature(struct denali_nand_info *denali)
} else {
denali->dev_info.wTotalBlocks *= denali->total_used_banks;
denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
- denali->dev_info.wSpectraEndBlock = denali->dev_info.wTotalBlocks - 1;
+ denali->dev_info.wSpectraEndBlock =
+ denali->dev_info.wTotalBlocks - 1;
denali->dev_info.wDataBlockNum =
denali->dev_info.wSpectraEndBlock -
denali->dev_info.wSpectraStartBlock + 1;
@@ -776,13 +811,19 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
- denali->dev_info.wDeviceMaker = ioread32(denali->flash_reg + MANUFACTURER_ID);
- denali->dev_info.wDeviceID = ioread32(denali->flash_reg + DEVICE_ID);
- denali->dev_info.bDeviceParam0 = ioread32(denali->flash_reg + DEVICE_PARAM_0);
- denali->dev_info.bDeviceParam1 = ioread32(denali->flash_reg + DEVICE_PARAM_1);
- denali->dev_info.bDeviceParam2 = ioread32(denali->flash_reg + DEVICE_PARAM_2);
+ denali->dev_info.wDeviceMaker =
+ ioread32(denali->flash_reg + MANUFACTURER_ID);
+ denali->dev_info.wDeviceID =
+ ioread32(denali->flash_reg + DEVICE_ID);
+ denali->dev_info.bDeviceParam0 =
+ ioread32(denali->flash_reg + DEVICE_PARAM_0);
+ denali->dev_info.bDeviceParam1 =
+ ioread32(denali->flash_reg + DEVICE_PARAM_1);
+ denali->dev_info.bDeviceParam2 =
+ ioread32(denali->flash_reg + DEVICE_PARAM_2);
- denali->dev_info.MLCDevice = ioread32(denali->flash_reg + DEVICE_PARAM_0) & 0x0c;
+ denali->dev_info.MLCDevice =
+ ioread32(denali->flash_reg + DEVICE_PARAM_0) & 0x0c;
if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
@@ -831,7 +872,8 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
denali->dev_info.wPageSpareSize =
ioread32(denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
- denali->dev_info.wPagesPerBlock = ioread32(denali->flash_reg + PAGES_PER_BLOCK);
+ denali->dev_info.wPagesPerBlock =
+ ioread32(denali->flash_reg + PAGES_PER_BLOCK);
denali->dev_info.wPageSize =
denali->dev_info.wPageDataSize + denali->dev_info.wPageSpareSize;
@@ -840,11 +882,13 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
denali->dev_info.wBlockDataSize =
denali->dev_info.wPagesPerBlock * denali->dev_info.wPageDataSize;
- denali->dev_info.wDeviceWidth = ioread32(denali->flash_reg + DEVICE_WIDTH);
+ denali->dev_info.wDeviceWidth =
+ ioread32(denali->flash_reg + DEVICE_WIDTH);
denali->dev_info.wDeviceType =
((ioread32(denali->flash_reg + DEVICE_WIDTH) > 0) ? 16 : 8);
- denali->dev_info.wDevicesConnected = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ denali->dev_info.wDevicesConnected =
+ ioread32(denali->flash_reg + DEVICES_CONNECTED);
denali->dev_info.wSpareSkipBytes =
ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES) *
@@ -933,7 +977,8 @@ static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
free_irq(irqnum, denali);
}
-static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask)
+static void denali_irq_enable(struct denali_nand_info *denali,
+ uint32_t int_mask)
{
denali_write32(int_mask, denali->flash_reg + INTR_EN0);
denali_write32(int_mask, denali->flash_reg + INTR_EN1);
@@ -950,7 +995,8 @@ static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
}
/* Interrupts are cleared by writing a 1 to the appropriate status bit */
-static inline void clear_interrupt(struct denali_nand_info *denali, uint32_t irq_mask)
+static inline void clear_interrupt(struct denali_nand_info *denali,
+ uint32_t irq_mask)
{
uint32_t intr_status_reg = 0;
@@ -1013,9 +1059,11 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
if (is_flash_bank_valid(denali->flash_bank)) {
/* check to see if controller generated
* the interrupt, since this is a shared interrupt */
- if ((irq_status = denali_irq_detected(denali)) != 0) {
+ irq_status = denali_irq_detected(denali);
+ if (irq_status != 0) {
#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status;
+ denali->irq_debug_array[denali->idx++] =
+ 0x10000000 | irq_status;
denali->idx %= 32;
printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status);
@@ -1048,12 +1096,14 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
#if DEBUG_DENALI
printk(KERN_INFO "waiting for 0x%x\n", irq_mask);
#endif
- comp_res = wait_for_completion_timeout(&denali->complete, timeout);
+ comp_res =
+ wait_for_completion_timeout(&denali->complete, timeout);
spin_lock_irq(&denali->irq_lock);
intr_status = denali->irq_status;
#if DEBUG_DENALI
- denali->irq_debug_array[denali->idx++] = 0x20000000 | (irq_mask << 16) | intr_status;
+ denali->irq_debug_array[denali->idx++] =
+ 0x20000000 | (irq_mask << 16) | intr_status;
denali->idx %= 32;
#endif
@@ -1061,7 +1111,9 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
denali->irq_status &= ~irq_mask;
spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
- if (retry) printk(KERN_INFO "status on retry = 0x%x\n", intr_status);
+ if (retry)
+ printk(KERN_INFO "status on retry = 0x%x\n",
+ intr_status);
#endif
/* our interrupt was detected */
break;
@@ -1071,8 +1123,10 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
print_irq_log(denali);
- printk(KERN_INFO "received irq nobody cared: irq_status = 0x%x,"
- " irq_mask = 0x%x, timeout = %ld\n", intr_status, irq_mask, comp_res);
+ printk(KERN_INFO "received irq nobody cared:"
+ " irq_status = 0x%x, irq_mask = 0x%x,"
+ " timeout = %ld\n", intr_status,
+ irq_mask, comp_res);
#endif
retry = true;
}
@@ -1101,15 +1155,18 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
/* Enable spare area/ECC per user's request. */
denali_write32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
- denali_write32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
+ denali_write32(transfer_spare_flag,
+ denali->flash_reg + TRANSFER_SPARE_REG);
}
/* sends a pipeline command operation to the controller. See the Denali NAND
controller's user guide for more information (section 4.2.3.6).
*/
-static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en,
- bool transfer_spare, int access_type,
- int op)
+static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
+ bool ecc_en,
+ bool transfer_spare,
+ int access_type,
+ int op)
{
int status = PASS;
uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
@@ -1123,7 +1180,9 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
#if DEBUG_DENALI
spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] = 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) | (access_type << 4);
+ denali->irq_debug_array[denali->idx++] =
+ 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) |
+ (access_type << 4);
denali->idx %= 32;
spin_unlock_irq(&denali->irq_lock);
#endif
@@ -1157,16 +1216,19 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
cmd = MODE_01 | addr;
denali_write32(cmd, denali->flash_mem);
} else {
- index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count);
+ index_addr(denali, (uint32_t)cmd,
+ 0x2000 | op | page_count);
/* wait for command to be accepted
- * can always use status0 bit as the mask is identical for each
+ * can always use status0 bit as the
+ * mask is identical for each
* bank. */
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
printk(KERN_ERR "cmd, page, addr on timeout "
- "(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr);
+ "(0x%x, 0x%x, 0x%x)\n", cmd,
+ denali->page, addr);
status = FAIL;
} else {
cmd = MODE_01 | addr;
@@ -1178,8 +1240,9 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
}
/* helper function that simply writes a buffer to the flash */
-static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf,
- int len)
+static int write_data_to_flash_mem(struct denali_nand_info *denali,
+ const uint8_t *buf,
+ int len)
{
uint32_t i = 0, *buf32;
@@ -1195,8 +1258,9 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_
}
/* helper function that simply reads a buffer from the flash */
-static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf,
- int len)
+static int read_data_from_flash_mem(struct denali_nand_info *denali,
+ uint8_t *buf,
+ int len)
{
uint32_t i = 0, *buf32;
@@ -1234,7 +1298,8 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
#if DEBUG_DENALI
spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] = 0x80000000 | mtd->oobsize;
+ denali->irq_debug_array[denali->idx++] =
+ 0x80000000 | mtd->oobsize;
denali->idx %= 32;
spin_unlock_irq(&denali->irq_lock);
#endif
@@ -1258,7 +1323,8 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_mask = INTR_STATUS0__LOAD_COMP, irq_status = 0, addr = 0x0, cmd = 0x0;
+ uint32_t irq_mask = INTR_STATUS0__LOAD_COMP,
+ irq_status = 0, addr = 0x0, cmd = 0x0;
denali->page = page;
@@ -1275,7 +1341,8 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0)
- printk(KERN_ERR "page on OOB timeout %d\n", denali->page);
+ printk(KERN_ERR "page on OOB timeout %d\n",
+ denali->page);
/* We set the device back to MAIN_ACCESS here as I observed
* instability with the controller if you do a block erase
@@ -1289,7 +1356,8 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
#if DEBUG_DENALI
spin_lock_irq(&denali->irq_lock);
- denali->irq_debug_array[denali->idx++] = 0x60000000 | mtd->oobsize;
+ denali->irq_debug_array[denali->idx++] =
+ 0x60000000 | mtd->oobsize;
denali->idx %= 32;
spin_unlock_irq(&denali->irq_lock);
#endif
@@ -1358,15 +1426,17 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
}
} else {
/* if the error is not correctable, need to
- * look at the page to see if it is an erased page.
- * if so, then it's not a real ECC error */
+ * look at the page to see if it is an erased
+ * page. if so, then it's not a real ECC error
+ * */
check_erased_page = true;
}
#if DEBUG_DENALI
- printk(KERN_INFO "Detected ECC error in page %d: err_addr = 0x%08x,"
- " info to fix is 0x%08x\n", denali->page, err_address,
- err_correction_info);
+ printk(KERN_INFO "Detected ECC error in page %d:"
+ " err_addr = 0x%08x, info to fix is"
+ " 0x%08x\n", denali->page, err_address,
+ err_correction_info);
#endif
} while (!ECC_LAST_ERR(err_correction_info));
}
@@ -1451,10 +1521,11 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer);
+ printk(KERN_ERR "timeout on write_page"
+ " (type = %d)\n", raw_xfer);
denali->status =
- (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL :
- PASS;
+ (irq_status & INTR_STATUS0__PROGRAM_FAIL) ?
+ NAND_STATUS_FAIL : PASS;
}
denali_enable_dma(denali, false);
@@ -1637,8 +1708,8 @@ static void denali_erase(struct mtd_info *mtd, int page)
irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP |
INTR_STATUS0__ERASE_FAIL);
- denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? NAND_STATUS_FAIL :
- PASS;
+ denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ?
+ NAND_STATUS_FAIL : PASS;
}
static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
@@ -1661,11 +1732,16 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
/* write manufacturer information into nand
buffer for NAND subsystem to fetch.
*/
- write_byte_to_buf(denali, denali->dev_info.wDeviceMaker);
- write_byte_to_buf(denali, denali->dev_info.wDeviceID);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam0);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam1);
- write_byte_to_buf(denali, denali->dev_info.bDeviceParam2);
+ write_byte_to_buf(denali,
+ denali->dev_info.wDeviceMaker);
+ write_byte_to_buf(denali,
+ denali->dev_info.wDeviceID);
+ write_byte_to_buf(denali,
+ denali->dev_info.bDeviceParam0);
+ write_byte_to_buf(denali,
+ denali->dev_info.bDeviceParam1);
+ write_byte_to_buf(denali,
+ denali->dev_info.bDeviceParam2);
} else {
int i;
for (i = 0; i < 5; i++)
@@ -1683,7 +1759,8 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
/* TODO: Read OOB data */
break;
default:
- printk(KERN_ERR ": unsupported command received 0x%x\n", cmd);
+ printk(KERN_ERR ": unsupported command"
+ " received 0x%x\n", cmd);
break;
}
}
@@ -1718,7 +1795,8 @@ static void denali_hw_init(struct denali_nand_info *denali)
denali_irq_init(denali);
NAND_Flash_Reset(denali);
denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
- denali_write32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE);
+ denali_write32(CHIP_EN_DONT_CARE__FLAG,
+ denali->flash_reg + CHIP_ENABLE_DONT_CARE);
denali_write32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES);
denali_write32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
@@ -1824,8 +1902,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
* ONFI timing mode 1 and below.
*/
if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
- printk(KERN_ERR "Intel CE4100 only supports ONFI timing mode 1 "
- "or below\n");
+ printk(KERN_ERR "Intel CE4100 only supports"
+ " ONFI timing mode 1 or below\n");
ret = -EINVAL;
goto failed_enable;
}
@@ -1844,7 +1922,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
mem_base = csr_base + csr_len;
mem_len = csr_len;
nand_dbg_print(NAND_DBG_WARN,
- "Spectra: No second BAR for PCI device; assuming %08Lx\n",
+ "Spectra: No second"
+ " BAR for PCI device;"
+ " assuming %08Lx\n",
(uint64_t)csr_base);
}
}
@@ -1856,8 +1936,10 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
printk(KERN_ERR "Spectra: no usable DMA configuration\n");
goto failed_enable;
}
- denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE,
- PCI_DMA_BIDIRECTIONAL);
+ denali->buf.dma_buf =
+ pci_map_single(dev, denali->buf.buf,
+ DENALI_BUF_SIZE,
+ PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {
printk(KERN_ERR "Spectra: failed to map DMA buffer\n");
@@ -1997,7 +2079,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
ret = add_mtd_device(&denali->mtd);
if (ret) {
- printk(KERN_ERR "Spectra: Failed to register MTD device: %d\n", ret);
+ printk(KERN_ERR "Spectra: Failed to register"
+ " MTD device: %d\n", ret);
goto failed_nand;
}
return 0;
@@ -2051,7 +2134,8 @@ static struct pci_driver denali_pci_driver = {
static int __devinit denali_init(void)
{
- printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
+ printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n",
+ __DATE__, __TIME__);
return pci_register_driver(&denali_pci_driver);
}
--
GitLab
From a99d17966cfa65cd1767cbddb209166c18fedc74 Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Tue, 27 Jul 2010 11:32:21 +0800
Subject: [PATCH 230/863] mtd: denali.c: fix reserved all check-patch errors
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 102 ++++++++++++++++++++------------------
1 file changed, 53 insertions(+), 49 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 3ce11cc69721d..52278d839d08c 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -119,7 +119,7 @@ static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
INTR_STATUS3__RST_COMP};
/* specifies the debug level of the driver */
-static int nand_debug_level = 0;
+static int nand_debug_level;
/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
@@ -991,7 +991,7 @@ static void denali_irq_enable(struct denali_nand_info *denali,
*/
static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
{
- return (read_interrupt_status(denali) & DENALI_IRQ_ALL);
+ return read_interrupt_status(denali) & DENALI_IRQ_ALL;
}
/* Interrupts are cleared by writing a 1 to the appropriate status bit */
@@ -1172,9 +1172,12 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
irq_mask = 0;
- if (op == DENALI_READ) irq_mask = INTR_STATUS0__LOAD_COMP;
- else if (op == DENALI_WRITE) irq_mask = 0;
- else BUG();
+ if (op == DENALI_READ)
+ irq_mask = INTR_STATUS0__LOAD_COMP;
+ else if (op == DENALI_WRITE)
+ irq_mask = 0;
+ else
+ BUG();
setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
@@ -1448,7 +1451,8 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en)
{
uint32_t reg_val = 0x0;
- if (en) reg_val = DMA_ENABLE__FLAG;
+ if (en)
+ reg_val = DMA_ENABLE__FLAG;
denali_write32(reg_val, denali->flash_reg + DMA_ENABLE);
ioread32(denali->flash_reg + DMA_ENABLE);
@@ -1721,47 +1725,47 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page);
#endif
switch (cmd) {
- case NAND_CMD_PAGEPROG:
- break;
- case NAND_CMD_STATUS:
- read_status(denali);
- break;
- case NAND_CMD_READID:
- reset_buf(denali);
- if (denali->flash_bank < denali->total_used_banks) {
- /* write manufacturer information into nand
- buffer for NAND subsystem to fetch.
- */
- write_byte_to_buf(denali,
- denali->dev_info.wDeviceMaker);
- write_byte_to_buf(denali,
- denali->dev_info.wDeviceID);
- write_byte_to_buf(denali,
- denali->dev_info.bDeviceParam0);
- write_byte_to_buf(denali,
- denali->dev_info.bDeviceParam1);
- write_byte_to_buf(denali,
- denali->dev_info.bDeviceParam2);
- } else {
- int i;
- for (i = 0; i < 5; i++)
- write_byte_to_buf(denali, 0xff);
- }
- break;
- case NAND_CMD_READ0:
- case NAND_CMD_SEQIN:
- denali->page = page;
- break;
- case NAND_CMD_RESET:
- reset_bank(denali);
- break;
- case NAND_CMD_READOOB:
- /* TODO: Read OOB data */
- break;
- default:
- printk(KERN_ERR ": unsupported command"
- " received 0x%x\n", cmd);
- break;
+ case NAND_CMD_PAGEPROG:
+ break;
+ case NAND_CMD_STATUS:
+ read_status(denali);
+ break;
+ case NAND_CMD_READID:
+ reset_buf(denali);
+ if (denali->flash_bank < denali->total_used_banks) {
+ /* write manufacturer information into nand
+ buffer for NAND subsystem to fetch.
+ */
+ write_byte_to_buf(denali,
+ denali->dev_info.wDeviceMaker);
+ write_byte_to_buf(denali,
+ denali->dev_info.wDeviceID);
+ write_byte_to_buf(denali,
+ denali->dev_info.bDeviceParam0);
+ write_byte_to_buf(denali,
+ denali->dev_info.bDeviceParam1);
+ write_byte_to_buf(denali,
+ denali->dev_info.bDeviceParam2);
+ } else {
+ int i;
+ for (i = 0; i < 5; i++)
+ write_byte_to_buf(denali, 0xff);
+ }
+ break;
+ case NAND_CMD_READ0:
+ case NAND_CMD_SEQIN:
+ denali->page = page;
+ break;
+ case NAND_CMD_RESET:
+ reset_bank(denali);
+ break;
+ case NAND_CMD_READOOB:
+ /* TODO: Read OOB data */
+ break;
+ default:
+ printk(KERN_ERR ": unsupported command"
+ " received 0x%x\n", cmd);
+ break;
}
}
@@ -1807,7 +1811,7 @@ static void denali_hw_init(struct denali_nand_info *denali)
}
/* ECC layout for SLC devices. Denali spec indicates SLC fixed at 4 bytes */
-#define ECC_BYTES_SLC 4 * (2048 / ECC_SECTOR_SIZE)
+#define ECC_BYTES_SLC (4 * (2048 / ECC_SECTOR_SIZE))
static struct nand_ecclayout nand_oob_slc = {
.eccbytes = 4,
.eccpos = { 0, 1, 2, 3 }, /* not used */
@@ -1819,7 +1823,7 @@ static struct nand_ecclayout nand_oob_slc = {
}
};
-#define ECC_BYTES_MLC 14 * (2048 / ECC_SECTOR_SIZE)
+#define ECC_BYTES_MLC (14 * (2048 / ECC_SECTOR_SIZE))
static struct nand_ecclayout nand_oob_mlc_14bit = {
.eccbytes = 14,
.eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */
--
GitLab
From 7be3c13425ddeed8427cfaad65c9123c2c8ca331 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <Michael.Hennerich@analog.com>
Date: Thu, 5 Aug 2010 10:05:55 -0700
Subject: [PATCH 231/863] Input: adxl34x - do not mark device as disabled on
startup
Do not mark device as desabled on startup - otherwise user must reset
disable sysfs hook before the driver delivers any data.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/misc/adxl34x.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index e2ca017080809..de5900d50788b 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -724,7 +724,6 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
pdata = &ac->pdata;
ac->input = input_dev;
- ac->disabled = true;
ac->dev = dev;
ac->irq = irq;
ac->bops = bops;
--
GitLab
From eda936ef17b921e56239ab4db2027d76abf8bebc Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Tue, 27 Jul 2010 14:17:37 +0800
Subject: [PATCH 232/863] mtd: denali: rename functions which is named by using
capitals
rename these functions' name and remove additional declarations
in header file
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 22 +++++++++++-----------
drivers/mtd/nand/denali.h | 5 -----
2 files changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 52278d839d08c..0c76a16774c96 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -221,7 +221,7 @@ static void reset_bank(struct denali_nand_info *denali)
}
/* Reset the flash controller */
-static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
+static uint16_t denali_nand_reset(struct denali_nand_info *denali)
{
uint32_t i;
@@ -256,7 +256,7 @@ static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
* programs the clocking register accordingly. The mode is determined by
* the get_onfi_nand_para routine.
*/
-static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali,
+static void nand_onfi_timing_set(struct denali_nand_info *denali,
uint16_t mode)
{
uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
@@ -487,7 +487,7 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
break;
}
- NAND_ONFi_Timing_Mode(denali, i);
+ nand_onfi_timing_set(denali, i);
index_addr(denali, MODE_11 | 0, 0x90);
index_addr(denali, MODE_11 | 1, 0);
@@ -803,7 +803,7 @@ static void dump_device_info(struct denali_nand_info *denali)
denali->dev_info.nBitsInBlockDataSize);
}
-static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
+static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
{
uint16_t status = PASS;
uint8_t no_of_planes;
@@ -928,12 +928,12 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
* with a specific ONFI mode, we apply those changes here.
*/
if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
- NAND_ONFi_Timing_Mode(denali, onfi_timing_mode);
+ nand_onfi_timing_set(denali, onfi_timing_mode);
return status;
}
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
+static void denali_set_intr_modes(struct denali_nand_info *denali,
uint16_t INT_ENABLE)
{
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
@@ -958,7 +958,7 @@ static void denali_irq_init(struct denali_nand_info *denali)
uint32_t int_mask = 0;
/* Disable global interrupts */
- NAND_LLD_Enable_Disable_Interrupts(denali, false);
+ denali_set_intr_modes(denali, false);
int_mask = DENALI_IRQ_ALL;
@@ -973,7 +973,7 @@ static void denali_irq_init(struct denali_nand_info *denali)
static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
{
- NAND_LLD_Enable_Disable_Interrupts(denali, false);
+ denali_set_intr_modes(denali, false);
free_irq(irqnum, denali);
}
@@ -1797,7 +1797,7 @@ static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
static void denali_hw_init(struct denali_nand_info *denali)
{
denali_irq_init(denali);
- NAND_Flash_Reset(denali);
+ denali_nand_reset(denali);
denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
denali_write32(CHIP_EN_DONT_CARE__FLAG,
denali->flash_reg + CHIP_ENABLE_DONT_CARE);
@@ -1993,11 +1993,11 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
}
/* now that our ISR is registered, we can enable interrupts */
- NAND_LLD_Enable_Disable_Interrupts(denali, true);
+ denali_set_intr_modes(denali, true);
pci_set_drvdata(dev, denali);
- NAND_Read_Device_ID(denali);
+ denali_nand_timing_set(denali);
/* MTD supported page sizes vary by kernel. We validate our
* kernel supports the device here.
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index b56fa3c7c1667..626c915294da1 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -804,9 +804,4 @@ struct denali_nand_info {
int idx;
};
-static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali);
-static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali);
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
- uint16_t INT_ENABLE);
-
#endif /*_LLD_NAND_*/
--
GitLab
From ef41e1bb11fc21acad35c8c3b673fe9f2f29d819 Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Fri, 6 Aug 2010 00:48:49 +0800
Subject: [PATCH 233/863] mtd: denali: update get nand para functions
In denali driver, wTotalBlocks variable is useless, so just
remove them in get_toshiba_nand_para and get_hynix_nand_para
first. Other wTotalBlocks in denali.c and other variables in
dev_info struct are also useless, will remove them later.
Also add a parameter in get_hynix_nand_para to prepare to
remove dev_info struct. This parameter comes by reading NAND
ID directly. Reading register will report wrong value for
some NAND chips, e.g. some Micron MT29F32G08QAA chips.
So update NAND_CMD_READID method as well.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 107 +++++++++++++-------------------------
1 file changed, 35 insertions(+), 72 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 0c76a16774c96..0f9fc5e7a5204 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -549,7 +549,6 @@ static void get_samsung_nand_para(struct denali_nand_info *denali)
static void get_toshiba_nand_para(struct denali_nand_info *denali)
{
- void __iomem *scratch_reg;
uint32_t tmp;
/* Workaround to fix a controller bug which reports a wrong */
@@ -567,33 +566,14 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
denali_write32(8, denali->flash_reg + ECC_CORRECTION);
#endif
}
-
- /* As Toshiba NAND can not provide it's block number, */
- /* so here we need user to provide the correct block */
- /* number in a scratch register before the Linux NAND */
- /* driver is loaded. If no valid value found in the scratch */
- /* register, then we use default block number value */
- scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
- if (!scratch_reg) {
- printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
- __FILE__, __LINE__);
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
- } else {
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: ioremap reg address: 0x%p\n", scratch_reg);
- denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
- if (denali->dev_info.wTotalBlocks < 512)
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
- iounmap(scratch_reg);
- }
}
-static void get_hynix_nand_para(struct denali_nand_info *denali)
+static void get_hynix_nand_para(struct denali_nand_info *denali,
+ uint8_t device_id)
{
- void __iomem *scratch_reg;
uint32_t main_size, spare_size;
- switch (denali->dev_info.wDeviceID) {
+ switch (device_id) {
case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK);
@@ -621,20 +601,6 @@ static void get_hynix_nand_para(struct denali_nand_info *denali)
"Will use default parameter values instead.\n",
denali->dev_info.wDeviceID);
}
-
- scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
- if (!scratch_reg) {
- printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
- __FILE__, __LINE__);
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
- } else {
- nand_dbg_print(NAND_DBG_WARN,
- "Spectra: ioremap reg address: 0x%p\n", scratch_reg);
- denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
- if (denali->dev_info.wTotalBlocks < 512)
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
- iounmap(scratch_reg);
- }
}
/* determines how many NAND chips are connected to the controller. Note for
@@ -807,34 +773,35 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
{
uint16_t status = PASS;
uint8_t no_of_planes;
+ uint32_t id_bytes[5], addr;
+ uint8_t i, maf_id, device_id;
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
- denali->dev_info.wDeviceMaker =
- ioread32(denali->flash_reg + MANUFACTURER_ID);
- denali->dev_info.wDeviceID =
- ioread32(denali->flash_reg + DEVICE_ID);
- denali->dev_info.bDeviceParam0 =
- ioread32(denali->flash_reg + DEVICE_PARAM_0);
- denali->dev_info.bDeviceParam1 =
- ioread32(denali->flash_reg + DEVICE_PARAM_1);
- denali->dev_info.bDeviceParam2 =
- ioread32(denali->flash_reg + DEVICE_PARAM_2);
-
- denali->dev_info.MLCDevice =
- ioread32(denali->flash_reg + DEVICE_PARAM_0) & 0x0c;
+ /* Use read id method to get device ID and other
+ * params. For some NAND chips, controller can't
+ * report the correct device ID by reading from
+ * DEVICE_ID register
+ * */
+ addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, (uint32_t)addr | 0, 0x90);
+ index_addr(denali, (uint32_t)addr | 1, 0);
+ for (i = 0; i < 5; i++)
+ index_addr_read_data(denali, addr | 2, &id_bytes[i]);
+ maf_id = id_bytes[0];
+ device_id = id_bytes[1];
if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
if (FAIL == get_onfi_nand_para(denali))
return FAIL;
- } else if (denali->dev_info.wDeviceMaker == 0xEC) { /* Samsung NAND */
+ } else if (maf_id == 0xEC) { /* Samsung NAND */
get_samsung_nand_para(denali);
- } else if (denali->dev_info.wDeviceMaker == 0x98) { /* Toshiba NAND */
+ } else if (maf_id == 0x98) { /* Toshiba NAND */
get_toshiba_nand_para(denali);
- } else if (denali->dev_info.wDeviceMaker == 0xAD) { /* Hynix NAND */
- get_hynix_nand_para(denali);
+ } else if (maf_id == 0xAD) { /* Hynix NAND */
+ get_hynix_nand_para(denali, device_id);
} else {
denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
}
@@ -1720,6 +1687,8 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t addr, id;
+ int i;
#if DEBUG_DENALI
printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page);
@@ -1732,24 +1701,18 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
break;
case NAND_CMD_READID:
reset_buf(denali);
- if (denali->flash_bank < denali->total_used_banks) {
- /* write manufacturer information into nand
- buffer for NAND subsystem to fetch.
- */
- write_byte_to_buf(denali,
- denali->dev_info.wDeviceMaker);
- write_byte_to_buf(denali,
- denali->dev_info.wDeviceID);
- write_byte_to_buf(denali,
- denali->dev_info.bDeviceParam0);
- write_byte_to_buf(denali,
- denali->dev_info.bDeviceParam1);
- write_byte_to_buf(denali,
- denali->dev_info.bDeviceParam2);
- } else {
- int i;
- for (i = 0; i < 5; i++)
- write_byte_to_buf(denali, 0xff);
+ /*sometimes ManufactureId read from register is not right
+ * e.g. some of Micron MT29F32G08QAA MLC NAND chips
+ * So here we send READID cmd to NAND insteand
+ * */
+ addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, (uint32_t)addr | 0, 0x90);
+ index_addr(denali, (uint32_t)addr | 1, 0);
+ for (i = 0; i < 5; i++) {
+ index_addr_read_data(denali,
+ (uint32_t)addr | 2,
+ &id);
+ write_byte_to_buf(denali, id);
}
break;
case NAND_CMD_READ0:
--
GitLab
From 7f29f17b57255b6395046805a98bc663ded63fb8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=C3=89ric=20Piel?= <E.A.B.Piel@tudelft.nl>
Date: Thu, 5 Aug 2010 23:51:49 -0700
Subject: [PATCH 234/863] Input: elantech - discard the first 2 positions on
some firmwares
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
According to the Dell/Ubuntu driver, what was previously observed as
"jumpy cursor" corresponds to the hardware sending incorrect data for
the first two reports of a one touch finger. So let's use the same
workaround as in the other driver. Also, detect another firmware
version with the same behaviour, as in the other driver.
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 21 ++++++++++-----------
drivers/input/mouse/elantech.h | 7 ++++---
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index b18862b2a70e1..bd5b91da169e9 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -185,7 +185,6 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int fingers;
- static int old_fingers;
if (etd->fw_version < 0x020000) {
/*
@@ -203,10 +202,13 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
}
if (etd->jumpy_cursor) {
- /* Discard packets that are likely to have bogus coordinates */
- if (fingers > old_fingers) {
+ if (fingers != 1) {
+ etd->single_finger_reports = 0;
+ } else if (etd->single_finger_reports < 2) {
+ /* Discard first 2 reports of one finger, bogus */
+ etd->single_finger_reports++;
elantech_debug("discarding packet\n");
- goto discard_packet_v1;
+ return;
}
}
@@ -238,9 +240,6 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
}
input_sync(dev);
-
- discard_packet_v1:
- old_fingers = fingers;
}
/*
@@ -733,13 +732,13 @@ int elantech_init(struct psmouse *psmouse)
etd->capabilities = param[0];
/*
- * This firmware seems to suffer from misreporting coordinates when
+ * This firmware suffers from misreporting coordinates when
* a touch action starts causing the mouse cursor or scrolled page
* to jump. Enable a workaround.
*/
- if (etd->fw_version == 0x020022) {
- pr_info("firmware version 2.0.34 detected, enabling jumpy cursor workaround\n");
- etd->jumpy_cursor = 1;
+ if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) {
+ pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n");
+ etd->jumpy_cursor = true;
}
if (elantech_set_absolute_mode(psmouse)) {
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index ac57bde1bb9f3..aa4aac5d21983 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -100,10 +100,11 @@ struct elantech_data {
unsigned char reg_26;
unsigned char debug;
unsigned char capabilities;
- unsigned char paritycheck;
- unsigned char jumpy_cursor;
+ bool paritycheck;
+ bool jumpy_cursor;
unsigned char hw_version;
- unsigned int fw_version;
+ unsigned int fw_version;
+ unsigned int single_finger_reports;
unsigned char parity[256];
};
--
GitLab
From 22462d9fcf5b29184716aca486058943b2d6995f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=C3=89ric=20Piel?= <E.A.B.Piel@tudelft.nl>
Date: Thu, 5 Aug 2010 23:51:49 -0700
Subject: [PATCH 235/863] Input: elantech - report position also with 3 fingers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The 6-byte protocol supports reporting the position when three fingers
are pressed, exactly like when one finger is pressed. Report this.
In addition, it is also distinguishes between 3 and 4 fingers pressed.
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index bd5b91da169e9..48311204ba51a 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -257,6 +257,14 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
input_report_key(dev, BTN_TOUCH, fingers != 0);
switch (fingers) {
+ case 3:
+ /*
+ * Same as one finger, except report of more than 3 fingers:
+ * byte 3: n4 . w1 w0 . . . .
+ */
+ if (packet[3] & 0x80)
+ fingers = 4;
+ /* pass through... */
case 1:
/*
* byte 1: . . . . . x10 x9 x8
@@ -309,6 +317,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+ input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
@@ -466,6 +475,7 @@ static void elantech_set_input_params(struct psmouse *psmouse)
break;
case 2:
+ __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);
--
GitLab
From dba76c033f1b88b6eb0fa697b824f954b11f8a97 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Wed, 28 Jul 2010 18:53:16 +0300
Subject: [PATCH 236/863] mtd: blkdevs: fix crash related to sysfs attributes.
Remove the attributes group before disk to avoid use after free
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/mtd_blkdevs.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index a6bb5863e8f38..89e07e5af5776 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -410,13 +410,14 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
BUG();
}
- /* Stop new requests to arrive */
- del_gendisk(old->disk);
-
if (old->disk_attributes)
sysfs_remove_group(&disk_to_dev(old->disk)->kobj,
old->disk_attributes);
+ /* Stop new requests to arrive */
+ del_gendisk(old->disk);
+
+
/* Stop the thread */
kthread_stop(old->thread);
--
GitLab
From 6f92355c6e7a680c8f61f3ae30e870d05843b98f Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Wed, 28 Jul 2010 18:53:17 +0300
Subject: [PATCH 237/863] mtd: update description on sm_ftl
I think that scary description can go now...
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/Kconfig | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 71eda03b925f2..1e2cbf5d9aa11 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -311,11 +311,14 @@ config SM_FTL
select MTD_BLKDEVS
select MTD_NAND_ECC
help
- This enables new and very EXPERMENTAL support for SmartMedia/xD
+ This enables EXPERIMENTAL R/W support for SmartMedia/xD
FTL (Flash translation layer).
- Write support isn't yet well tested, therefore this code IS likely to
- eat your card, so please don't use it together with valuable data.
- Use readonly driver (CONFIG_SSFDC) instead.
+ Write support is only lightly tested, therefore this driver
+ isn't recommended to use with valuable data (anyway if you have
+ valuable data, do backups regardless of software/hardware you
+ use, because you never know what will eat your data...)
+ If you only need R/O access, you can use older R/O driver
+ (CONFIG_SSFDC)
config MTD_OOPS
tristate "Log panic/oops to an MTD buffer"
--
GitLab
From 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Wed, 28 Jul 2010 07:36:54 +0200
Subject: [PATCH 238/863] mtd: gen_nand: fix support for multiple chips
This patch corrects a problem where gen_nand driver assumed there can be only
one chip and ignored the pdata->chip.nr_chips value.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/plat_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 8d467315f02be..90e143e5ad3eb 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -91,7 +91,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
}
/* Scan to find existance of the device */
- if (nand_scan(&data->mtd, 1)) {
+ if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
err = -ENXIO;
goto out;
}
--
GitLab
From b8664b3762dc81e7a19ad4ffaae4055d6d5a7196 Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Wed, 4 Aug 2010 22:57:51 -0700
Subject: [PATCH 239/863] mtd: Missing slab.h include
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 0f9fc5e7a5204..c41d2780eaee1 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/wait.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/mtd/mtd.h>
#include <linux/module.h>
--
GitLab
From 8ae664184c45def51ff0b61d4bd6c6671db6cb4f Mon Sep 17 00:00:00 2001
From: Stefani Seibold <stefani@seibold.net>
Date: Thu, 5 Aug 2010 09:19:26 +0200
Subject: [PATCH 240/863] mtd: change struct flchip_shared spinlock locking
into mutex
This patch prevent to schedule while atomic by changing the
flchip_shared spinlock into a mutex. This should be save since no atomic
path will use this lock.
It was suggested by Arnd Bergmann and Vasiliy Kulikov.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/chips/cfi_cmdset_0001.c | 20 ++++++++++----------
drivers/mtd/lpddr/lpddr_cmds.c | 20 ++++++++++----------
include/linux/mtd/flashchip.h | 2 +-
3 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 2fadb0239ba32..97d5546f9ea43 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -720,7 +720,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
chip = &newcfi->chips[0];
for (i = 0; i < cfi->numchips; i++) {
shared[i].writing = shared[i].erasing = NULL;
- spin_lock_init(&shared[i].lock);
+ mutex_init(&shared[i].lock);
for (j = 0; j < numparts; j++) {
*chip = cfi->chips[i];
chip->start += j << partshift;
@@ -889,7 +889,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
*/
struct flchip_shared *shared = chip->priv;
struct flchip *contender;
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
contender = shared->writing;
if (contender && contender != chip) {
/*
@@ -902,7 +902,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
* get_chip returns success we're clear to go ahead.
*/
ret = mutex_trylock(&contender->mutex);
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
if (!ret)
goto retry;
mutex_unlock(&chip->mutex);
@@ -917,7 +917,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
mutex_unlock(&contender->mutex);
return ret;
}
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
/* We should not own chip if it is already
* in FL_SYNCING state. Put contender and retry. */
@@ -933,7 +933,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
* on this chip. Sleep. */
if (mode == FL_ERASING && shared->erasing
&& shared->erasing->oldstate == FL_ERASING) {
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
mutex_unlock(&chip->mutex);
@@ -947,7 +947,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
shared->writing = chip;
if (mode == FL_ERASING)
shared->erasing = chip;
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
}
ret = chip_ready(map, chip, adr, mode);
if (ret == -EAGAIN)
@@ -962,7 +962,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
if (chip->priv) {
struct flchip_shared *shared = chip->priv;
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
if (shared->writing == chip && chip->oldstate == FL_READY) {
/* We own the ability to write, but we're done */
shared->writing = shared->erasing;
@@ -970,7 +970,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
/* give back ownership to who we loaned it from */
struct flchip *loaner = shared->writing;
mutex_lock(&loaner->mutex);
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
mutex_unlock(&chip->mutex);
put_chip(map, loaner, loaner->start);
mutex_lock(&chip->mutex);
@@ -988,11 +988,11 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
* Don't let the switch below mess things up since
* we don't have ownership to resume anything.
*/
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
wake_up(&chip->wq);
return;
}
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
}
switch(chip->oldstate) {
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index fece5be587156..04fdfcca93f72 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -98,7 +98,7 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
numchips = lpddr->numchips / lpddr->qinfo->HWPartsNum;
for (i = 0; i < numchips; i++) {
shared[i].writing = shared[i].erasing = NULL;
- spin_lock_init(&shared[i].lock);
+ mutex_init(&shared[i].lock);
for (j = 0; j < lpddr->qinfo->HWPartsNum; j++) {
*chip = lpddr->chips[i];
chip->start += j << lpddr->chipshift;
@@ -217,7 +217,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
*/
struct flchip_shared *shared = chip->priv;
struct flchip *contender;
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
contender = shared->writing;
if (contender && contender != chip) {
/*
@@ -230,7 +230,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
* get_chip returns success we're clear to go ahead.
*/
ret = mutex_trylock(&contender->mutex);
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
if (!ret)
goto retry;
mutex_unlock(&chip->mutex);
@@ -245,7 +245,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
mutex_unlock(&contender->mutex);
return ret;
}
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
/* We should not own chip if it is already in FL_SYNCING
* state. Put contender and retry. */
@@ -261,7 +261,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
Must sleep in such a case. */
if (mode == FL_ERASING && shared->erasing
&& shared->erasing->oldstate == FL_ERASING) {
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
mutex_unlock(&chip->mutex);
@@ -275,7 +275,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
shared->writing = chip;
if (mode == FL_ERASING)
shared->erasing = chip;
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
}
ret = chip_ready(map, chip, mode);
@@ -348,7 +348,7 @@ static void put_chip(struct map_info *map, struct flchip *chip)
{
if (chip->priv) {
struct flchip_shared *shared = chip->priv;
- spin_lock(&shared->lock);
+ mutex_lock(&shared->lock);
if (shared->writing == chip && chip->oldstate == FL_READY) {
/* We own the ability to write, but we're done */
shared->writing = shared->erasing;
@@ -356,7 +356,7 @@ static void put_chip(struct map_info *map, struct flchip *chip)
/* give back the ownership */
struct flchip *loaner = shared->writing;
mutex_lock(&loaner->mutex);
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
mutex_unlock(&chip->mutex);
put_chip(map, loaner);
mutex_lock(&chip->mutex);
@@ -374,11 +374,11 @@ static void put_chip(struct map_info *map, struct flchip *chip)
* Don't let the switch below mess things up since
* we don't have ownership to resume anything.
*/
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
wake_up(&chip->wq);
return;
}
- spin_unlock(&shared->lock);
+ mutex_unlock(&shared->lock);
}
switch (chip->oldstate) {
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index f43e9b49b751b..23cc10f8e3435 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -92,7 +92,7 @@ struct flchip {
/* This is used to handle contention on write/erase operations
between partitions of the same physical chip. */
struct flchip_shared {
- spinlock_t lock;
+ struct mutex lock;
struct flchip *writing;
struct flchip *erasing;
};
--
GitLab
From 9a9745c363277cc4e3a1d3e77b4814fbc2685a73 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= <biessmann@corscience.de>
Date: Thu, 5 Aug 2010 12:38:41 +0200
Subject: [PATCH 241/863] mtd: atmel_nand: fix warning: 'part_probes' defined
but not used
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This patch fixes
drivers/mtd/nand/atmel_nand.c:372: warning: 'part_probes' defined but not used
which is issued when CONFIG_MTD_PARTITIONS is defined but
CONFIG_MTD_CMDLINE_PARTS not.
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/atmel_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 04d30887ca7f1..ccce0f03b5dcf 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -364,7 +364,7 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
}
}
-#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
static const char *part_probes[] = { "cmdlinepart", NULL };
#endif
--
GitLab
From 5da195326b7e220b8cf993ec830ab7251d4cc1d0 Mon Sep 17 00:00:00 2001
From: Guillaume LECERF <glecerf@gmail.com>
Date: Thu, 5 Aug 2010 13:55:24 +0200
Subject: [PATCH 242/863] mtd: cfi_cmdset_0002: consider version 1.4 as a valid
primary extension version
The Spansion S29WS-P device family uses CFI version 1.4 [1].
Consider it as a valid version.
[1] http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/chips/cfi_cmdset_0002.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 749203f89b55f..bd20d1ff1b0d9 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -418,12 +418,13 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
cfi_fixup_major_minor(cfi, extp);
/*
- * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3
- * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 and on
+ * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
+ * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
* http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
+ * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
*/
if (extp->MajorVersion != '1' ||
- (extp->MajorVersion == '1' && ( extp->MinorVersion < '0' || extp->MinorVersion > '3'))) {
+ (extp->MajorVersion == '1' && (extp->MinorVersion < '0' || extp->MinorVersion > '4'))) {
printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query "
"version %c.%c (%#02x/%#02x).\n",
extp->MajorVersion, extp->MinorVersion,
--
GitLab
From 60845e7272632cfc5babc22eb8b72462a303dffa Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 4 Aug 2010 21:14:25 +0200
Subject: [PATCH 243/863] mtd: m25p80: add support for the EON EN25P{32, 64}
SPI flash chips
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/devices/m25p80.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 48bf325e9e84e..21d866c31bb9b 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -641,6 +641,10 @@ static const struct spi_device_id m25p_ids[] = {
{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
{ "at26df321", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
+ /* EON -- en25pxx */
+ { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
+ { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+
/* Macronix */
{ "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
{ "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
--
GitLab
From f80e521c916cb06ddd95bd90f2cf50b523be52f2 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Thu, 5 Aug 2010 16:58:36 +0200
Subject: [PATCH 244/863] mtd: m25p80: add support for the Intel/Numonyx
{16,32,64}0S33B SPI flash chips
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/devices/m25p80.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 21d866c31bb9b..8120cf31ef65c 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -645,6 +645,11 @@ static const struct spi_device_id m25p_ids[] = {
{ "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+ /* Intel/Numonyx -- xxxs33b */
+ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
+ { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) },
+ { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
+
/* Macronix */
{ "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
{ "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
@@ -834,11 +839,12 @@ static int __devinit m25p_probe(struct spi_device *spi)
dev_set_drvdata(&spi->dev, flash);
/*
- * Atmel and SST serial flash tend to power
+ * Atmel, SST and Intel/Numonyx serial flash tend to power
* up with the software protection bits set
*/
if (info->jedec_id >> 16 == 0x1f ||
+ info->jedec_id >> 16 == 0x89 ||
info->jedec_id >> 16 == 0xbf) {
write_enable(flash);
write_sr(flash, 0);
--
GitLab
From 0af18d27c36f28a8807297f21fa22979acd977f3 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 4 Aug 2010 21:14:27 +0200
Subject: [PATCH 245/863] mtd: m25p80: add support for the Winbond W25Q32 SPI
flash chip
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
drivers/mtd/devices/m25p80.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 8120cf31ef65c..f90941a785e4b 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -716,6 +716,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
{ "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
/* Catalyst / On Semiconductor -- non-JEDEC */
--
GitLab
From 66406524e50e32fde0dc01859ad3608ddefe107f Mon Sep 17 00:00:00 2001
From: "Chuanxiao.Dong" <chuanxiao.dong@intel.com>
Date: Fri, 6 Aug 2010 18:48:21 +0800
Subject: [PATCH 246/863] mtd: denali: Remove device_info_tag structure
Hi David,
I sent 4 patches using my intel email account. If there is any
problem about the format of these patches, I will resend them after
I arrived at home by using my gmail account, and I will keep on
using gmail account to send patches.
Thanks.
>From 242e3bf5e17f54b1df8cf285154a7c7a61ff62e9 Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Fri, 6 Aug 2010 15:29:41 +0800
Subject: [PATCH 1/4] mtd: denali: Remove device_info_tag structure.
Most of the variables in this structure are useless, so just
remove this structure and relevant codes.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 299 +++++---------------------------------
drivers/mtd/nand/denali.h | 43 +-----
2 files changed, 37 insertions(+), 305 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index c41d2780eaee1..14b227c8c29ee 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -364,43 +364,12 @@ static void set_ecc_config(struct denali_nand_info *denali)
denali_write32(8, denali->flash_reg + ECC_CORRECTION);
#endif
- if ((ioread32(denali->flash_reg + ECC_CORRECTION) &
- ECC_CORRECTION__VALUE) == 1) {
- denali->dev_info.wECCBytesPerSector = 4;
- denali->dev_info.wECCBytesPerSector *=
- denali->dev_info.wDevicesConnected;
- denali->dev_info.wNumPageSpareFlag =
- denali->dev_info.wPageSpareSize -
- denali->dev_info.wPageDataSize /
- (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
- denali->dev_info.wECCBytesPerSector
- - denali->dev_info.wSpareSkipBytes;
- } else {
- denali->dev_info.wECCBytesPerSector =
- (ioread32(denali->flash_reg + ECC_CORRECTION) &
- ECC_CORRECTION__VALUE) * 13 / 8;
- if ((denali->dev_info.wECCBytesPerSector) % 2 == 0)
- denali->dev_info.wECCBytesPerSector += 2;
- else
- denali->dev_info.wECCBytesPerSector += 1;
-
- denali->dev_info.wECCBytesPerSector *=
- denali->dev_info.wDevicesConnected;
- denali->dev_info.wNumPageSpareFlag =
- denali->dev_info.wPageSpareSize -
- denali->dev_info.wPageDataSize /
- (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
- denali->dev_info.wECCBytesPerSector
- - denali->dev_info.wSpareSkipBytes;
- }
}
/* queries the NAND device to see what ONFI modes it supports. */
static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
{
int i;
- uint16_t blks_lun_l, blks_lun_h, n_of_luns;
- uint32_t blockperlun, id;
denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET);
@@ -458,26 +427,6 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
denali_write32(INTR_STATUS3__TIME_OUT,
denali->flash_reg + INTR_STATUS3);
- denali->dev_info.wONFIDevFeatures =
- ioread32(denali->flash_reg + ONFI_DEVICE_FEATURES);
- denali->dev_info.wONFIOptCommands =
- ioread32(denali->flash_reg + ONFI_OPTIONAL_COMMANDS);
- denali->dev_info.wONFITimingMode =
- ioread32(denali->flash_reg + ONFI_TIMING_MODE);
- denali->dev_info.wONFIPgmCacheTimingMode =
- ioread32(denali->flash_reg + ONFI_PGM_CACHE_TIMING_MODE);
-
- n_of_luns = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
- ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
- blks_lun_l = ioread32(denali->flash_reg +
- ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
- blks_lun_h = ioread32(denali->flash_reg +
- ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
-
- blockperlun = (blks_lun_h << 16) | blks_lun_l;
-
- denali->dev_info.wTotalBlocks = n_of_luns * blockperlun;
-
if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
ONFI_TIMING_MODE__VALUE))
return FAIL;
@@ -490,16 +439,6 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
nand_onfi_timing_set(denali, i);
- index_addr(denali, MODE_11 | 0, 0x90);
- index_addr(denali, MODE_11 | 1, 0);
-
- for (i = 0; i < 3; i++)
- index_addr_read_data(denali, MODE_11 | 2, &id);
-
- nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id);
-
- denali->dev_info.MLCDevice = id & 0x0C;
-
/* By now, all the ONFI devices we know support the page cache */
/* rw feature. So here we enable the pipeline_rw_ahead feature */
/* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */
@@ -510,9 +449,6 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
static void get_samsung_nand_para(struct denali_nand_info *denali)
{
- uint8_t no_of_planes;
- uint32_t blk_size;
- uint64_t plane_size, capacity;
uint32_t id_bytes[5];
int i;
@@ -537,15 +473,6 @@ static void get_samsung_nand_para(struct denali_nand_info *denali)
denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT);
denali_write32(2, denali->flash_reg + CS_SETUP_CNT);
}
-
- no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
- plane_size = (uint64_t)64 << ((id_bytes[4] & 0x70) >> 4);
- blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) &
- 0x30) >> 4);
- capacity = (uint64_t)128 * plane_size * no_of_planes;
-
- do_div(capacity, blk_size);
- denali->dev_info.wTotalBlocks = capacity;
}
static void get_toshiba_nand_para(struct denali_nand_info *denali)
@@ -594,13 +521,12 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
#elif SUPPORT_8BITECC
denali_write32(8, denali->flash_reg + ECC_CORRECTION);
#endif
- denali->dev_info.MLCDevice = 1;
break;
default:
nand_dbg_print(NAND_DBG_WARN,
"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
"Will use default parameter values instead.\n",
- denali->dev_info.wDeviceID);
+ device_id);
}
}
@@ -650,130 +576,31 @@ static void find_valid_banks(struct denali_nand_info *denali)
static void detect_partition_feature(struct denali_nand_info *denali)
{
+ /* For MRST platform, denali->fwblks represent the
+ * number of blocks firmware is taken,
+ * FW is in protect partition and MTD driver has no
+ * permission to access it. So let driver know how many
+ * blocks it can't touch.
+ * */
if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) &
PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
- denali->dev_info.wSpectraStartBlock =
+ denali->fwblks =
((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
MIN_MAX_BANK_1__MIN_VALUE) *
- denali->dev_info.wTotalBlocks)
+ denali->blksperchip)
+
(ioread32(denali->flash_reg + MIN_BLK_ADDR_1) &
MIN_BLK_ADDR_1__VALUE);
-
- denali->dev_info.wSpectraEndBlock =
- (((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
- MIN_MAX_BANK_1__MAX_VALUE) >> 2) *
- denali->dev_info.wTotalBlocks)
- +
- (ioread32(denali->flash_reg + MAX_BLK_ADDR_1) &
- MAX_BLK_ADDR_1__VALUE);
-
- denali->dev_info.wTotalBlocks *=
- denali->total_used_banks;
-
- if (denali->dev_info.wSpectraEndBlock >=
- denali->dev_info.wTotalBlocks) {
- denali->dev_info.wSpectraEndBlock =
- denali->dev_info.wTotalBlocks - 1;
- }
-
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- } else {
- denali->dev_info.wTotalBlocks *=
- denali->total_used_banks;
- denali->dev_info.wSpectraStartBlock =
- SPECTRA_START_BLOCK;
- denali->dev_info.wSpectraEndBlock =
- denali->dev_info.wTotalBlocks - 1;
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- }
- } else {
- denali->dev_info.wTotalBlocks *= denali->total_used_banks;
- denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
- denali->dev_info.wSpectraEndBlock =
- denali->dev_info.wTotalBlocks - 1;
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- }
-}
-
-static void dump_device_info(struct denali_nand_info *denali)
-{
- nand_dbg_print(NAND_DBG_DEBUG, "denali->dev_info:\n");
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n",
- denali->dev_info.wDeviceMaker);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n",
- denali->dev_info.wDeviceID);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n",
- denali->dev_info.wDeviceType);
- nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n",
- denali->dev_info.wSpectraStartBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n",
- denali->dev_info.wSpectraEndBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n",
- denali->dev_info.wTotalBlocks);
- nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n",
- denali->dev_info.wPagesPerBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n",
- denali->dev_info.wPageSize);
- nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n",
- denali->dev_info.wPageDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n",
- denali->dev_info.wPageSpareSize);
- nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n",
- denali->dev_info.wNumPageSpareFlag);
- nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n",
- denali->dev_info.wECCBytesPerSector);
- nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n",
- denali->dev_info.wBlockSize);
- nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n",
- denali->dev_info.wBlockDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n",
- denali->dev_info.wDataBlockNum);
- nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n",
- denali->dev_info.bPlaneNum);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n",
- denali->dev_info.wDeviceMainAreaSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n",
- denali->dev_info.wDeviceSpareAreaSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n",
- denali->dev_info.wDevicesConnected);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n",
- denali->dev_info.wDeviceWidth);
- nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n",
- denali->dev_info.wHWRevision);
- nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n",
- denali->dev_info.wHWFeatures);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n",
- denali->dev_info.wONFIDevFeatures);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n",
- denali->dev_info.wONFIOptCommands);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n",
- denali->dev_info.wONFITimingMode);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n",
- denali->dev_info.wONFIPgmCacheTimingMode);
- nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n",
- denali->dev_info.MLCDevice ? "Yes" : "No");
- nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n",
- denali->dev_info.wSpareSkipBytes);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n",
- denali->dev_info.nBitsInPageNumber);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n",
- denali->dev_info.nBitsInPageDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n",
- denali->dev_info.nBitsInBlockDataSize);
+ } else
+ denali->fwblks = SPECTRA_START_BLOCK;
+ } else
+ denali->fwblks = SPECTRA_START_BLOCK;
}
static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
{
uint16_t status = PASS;
- uint8_t no_of_planes;
uint32_t id_bytes[5], addr;
uint8_t i, maf_id, device_id;
@@ -803,8 +630,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
get_toshiba_nand_para(denali);
} else if (maf_id == 0xAD) { /* Hynix NAND */
get_hynix_nand_para(denali, device_id);
- } else {
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
}
nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
@@ -819,79 +644,12 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
ioread32(denali->flash_reg + CS_SETUP_CNT));
- denali->dev_info.wHWRevision = ioread32(denali->flash_reg + REVISION);
- denali->dev_info.wHWFeatures = ioread32(denali->flash_reg + FEATURES);
-
- denali->dev_info.wDeviceMainAreaSize =
- ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
- denali->dev_info.wDeviceSpareAreaSize =
- ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-
- denali->dev_info.wPageDataSize =
- ioread32(denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
-
- /* Note: When using the Micon 4K NAND device, the controller will report
- * Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes.
- * And if force set it to 218 bytes, the controller can not work
- * correctly. So just let it be. But keep in mind that this bug may
- * cause
- * other problems in future. - Yunpeng 2008-10-10
- */
- denali->dev_info.wPageSpareSize =
- ioread32(denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
-
- denali->dev_info.wPagesPerBlock =
- ioread32(denali->flash_reg + PAGES_PER_BLOCK);
-
- denali->dev_info.wPageSize =
- denali->dev_info.wPageDataSize + denali->dev_info.wPageSpareSize;
- denali->dev_info.wBlockSize =
- denali->dev_info.wPageSize * denali->dev_info.wPagesPerBlock;
- denali->dev_info.wBlockDataSize =
- denali->dev_info.wPagesPerBlock * denali->dev_info.wPageDataSize;
-
- denali->dev_info.wDeviceWidth =
- ioread32(denali->flash_reg + DEVICE_WIDTH);
- denali->dev_info.wDeviceType =
- ((ioread32(denali->flash_reg + DEVICE_WIDTH) > 0) ? 16 : 8);
-
- denali->dev_info.wDevicesConnected =
- ioread32(denali->flash_reg + DEVICES_CONNECTED);
-
- denali->dev_info.wSpareSkipBytes =
- ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES) *
- denali->dev_info.wDevicesConnected;
-
- denali->dev_info.nBitsInPageNumber =
- ilog2(denali->dev_info.wPagesPerBlock);
- denali->dev_info.nBitsInPageDataSize =
- ilog2(denali->dev_info.wPageDataSize);
- denali->dev_info.nBitsInBlockDataSize =
- ilog2(denali->dev_info.wBlockDataSize);
-
set_ecc_config(denali);
- no_of_planes = ioread32(denali->flash_reg + NUMBER_OF_PLANES) &
- NUMBER_OF_PLANES__VALUE;
-
- switch (no_of_planes) {
- case 0:
- case 1:
- case 3:
- case 7:
- denali->dev_info.bPlaneNum = no_of_planes + 1;
- break;
- default:
- status = FAIL;
- break;
- }
-
find_valid_banks(denali);
detect_partition_feature(denali);
- dump_device_info(denali);
-
/* If the user specified to override the default timings
* with a specific ONFI mode, we apply those changes here.
*/
@@ -1963,16 +1721,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali_nand_timing_set(denali);
- /* MTD supported page sizes vary by kernel. We validate our
- * kernel supports the device here.
- */
- if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
- ret = -ENODEV;
- printk(KERN_ERR "Spectra: device size not supported by this "
- "version of MTD.");
- goto failed_nand;
- }
-
nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
@@ -2003,6 +1751,16 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto failed_nand;
}
+ /* MTD supported page sizes vary by kernel. We validate our
+ * kernel supports the device here.
+ */
+ if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
+ ret = -ENODEV;
+ printk(KERN_ERR "Spectra: device size not supported by this "
+ "version of MTD.");
+ goto failed_nand;
+ }
+
/* second stage of the NAND scan
* this stage requires information regarding ECC and
* bad block management. */
@@ -2015,7 +1773,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
- if (denali->dev_info.MLCDevice) {
+ if (denali->nand.cellinfo & 0xc) {
denali->nand.ecc.layout = &nand_oob_mlc_14bit;
denali->nand.ecc.bytes = ECC_BYTES_MLC;
} else {/* SLC */
@@ -2023,6 +1781,15 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.ecc.bytes = ECC_BYTES_SLC;
}
+ /* Let driver know the total blocks number and
+ * how many blocks contained by each nand chip.
+ * blksperchip will help driver to know how many
+ * blocks is taken by FW.
+ * */
+ denali->totalblks = denali->mtd.size >>
+ denali->nand.phys_erase_shift;
+ denali->blksperchip = denali->totalblks / denali->nand.numchips;
+
/* These functions are required by the NAND core framework, otherwise,
* the NAND core will assert. However, we don't need them, so we'll stub
* them out. */
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 626c915294da1..fcac24199d124 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -620,44 +620,6 @@
#define MIN_MAX_BANK_7__MIN_VALUE 0x0003
#define MIN_MAX_BANK_7__MAX_VALUE 0x000c
-/* flash.h */
-struct device_info_tag {
- uint16_t wDeviceMaker;
- uint16_t wDeviceID;
- uint8_t bDeviceParam0;
- uint8_t bDeviceParam1;
- uint8_t bDeviceParam2;
- uint32_t wDeviceType;
- uint32_t wSpectraStartBlock;
- uint32_t wSpectraEndBlock;
- uint32_t wTotalBlocks;
- uint16_t wPagesPerBlock;
- uint16_t wPageSize;
- uint16_t wPageDataSize;
- uint16_t wPageSpareSize;
- uint16_t wNumPageSpareFlag;
- uint16_t wECCBytesPerSector;
- uint32_t wBlockSize;
- uint32_t wBlockDataSize;
- uint32_t wDataBlockNum;
- uint8_t bPlaneNum;
- uint16_t wDeviceMainAreaSize;
- uint16_t wDeviceSpareAreaSize;
- uint16_t wDevicesConnected;
- uint16_t wDeviceWidth;
- uint16_t wHWRevision;
- uint16_t wHWFeatures;
- uint16_t wONFIDevFeatures;
- uint16_t wONFIOptCommands;
- uint16_t wONFITimingMode;
- uint16_t wONFIPgmCacheTimingMode;
- uint16_t MLCDevice;
- uint16_t wSpareSkipBytes;
- uint8_t nBitsInPageNumber;
- uint8_t nBitsInPageDataSize;
- uint8_t nBitsInBlockDataSize;
-};
-
/* ffsdefs.h */
#define CLEAR 0 /*use this to clear a field instead of "fail"*/
#define SET 1 /*use this to set a field instead of "pass"*/
@@ -784,7 +746,6 @@ struct nand_buf {
struct denali_nand_info {
struct mtd_info mtd;
struct nand_chip nand;
- struct device_info_tag dev_info;
int flash_bank; /* currently selected chip */
int status;
int platform;
@@ -802,6 +763,10 @@ struct denali_nand_info {
uint32_t irq_status;
int irq_debug_array[32];
int idx;
+
+ uint32_t fwblks; /* represent how many blocks FW used */
+ uint32_t totalblks;
+ uint32_t blksperchip;
};
#endif /*_LLD_NAND_*/
--
GitLab
From 4c03bbdfed5497c3fed502226af1ef3fe8d23d08 Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Fri, 6 Aug 2010 15:45:19 +0800
Subject: [PATCH 247/863] mtd: denali: Remove unuseful code in get_xx_nand_para
functions
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 81 ++++-----------------------------------
1 file changed, 7 insertions(+), 74 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 14b227c8c29ee..a60f3f0186bb9 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -370,63 +370,9 @@ static void set_ecc_config(struct denali_nand_info *denali)
static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
{
int i;
-
- denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET);
-
- while (!((ioread32(denali->flash_reg + INTR_STATUS0) &
- INTR_STATUS0__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS0) &
- INTR_STATUS0__TIME_OUT)))
- ;
-
- if (ioread32(denali->flash_reg + INTR_STATUS0) &
- INTR_STATUS0__RST_COMP) {
- denali_write32(DEVICE_RESET__BANK1,
- denali->flash_reg + DEVICE_RESET);
- while (!((ioread32(denali->flash_reg + INTR_STATUS1) &
- INTR_STATUS1__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS1) &
- INTR_STATUS1__TIME_OUT)))
- ;
-
- if (ioread32(denali->flash_reg + INTR_STATUS1) &
- INTR_STATUS1__RST_COMP) {
- denali_write32(DEVICE_RESET__BANK2,
- denali->flash_reg + DEVICE_RESET);
- while (!((ioread32(denali->flash_reg + INTR_STATUS2) &
- INTR_STATUS2__RST_COMP) |
- (ioread32(denali->flash_reg + INTR_STATUS2) &
- INTR_STATUS2__TIME_OUT)))
- ;
-
- if (ioread32(denali->flash_reg + INTR_STATUS2) &
- INTR_STATUS2__RST_COMP) {
- denali_write32(DEVICE_RESET__BANK3,
- denali->flash_reg + DEVICE_RESET);
- while (!((ioread32(denali->flash_reg +
- INTR_STATUS3) &
- INTR_STATUS3__RST_COMP) |
- (ioread32(denali->flash_reg +
- INTR_STATUS3) &
- INTR_STATUS3__TIME_OUT)))
- ;
- } else {
- printk(KERN_ERR "Getting a time out for bank 2!\n");
- }
- } else {
- printk(KERN_ERR "Getting a time out for bank 1!\n");
- }
- }
-
- denali_write32(INTR_STATUS0__TIME_OUT,
- denali->flash_reg + INTR_STATUS0);
- denali_write32(INTR_STATUS1__TIME_OUT,
- denali->flash_reg + INTR_STATUS1);
- denali_write32(INTR_STATUS2__TIME_OUT,
- denali->flash_reg + INTR_STATUS2);
- denali_write32(INTR_STATUS3__TIME_OUT,
- denali->flash_reg + INTR_STATUS3);
-
+ /* we needn't to do a reset here because driver has already
+ * reset all the banks before
+ * */
if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
ONFI_TIMING_MODE__VALUE))
return FAIL;
@@ -447,23 +393,10 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
return PASS;
}
-static void get_samsung_nand_para(struct denali_nand_info *denali)
+static void get_samsung_nand_para(struct denali_nand_info *denali,
+ uint8_t device_id)
{
- uint32_t id_bytes[5];
- int i;
-
- index_addr(denali, (uint32_t)(MODE_11 | 0), 0x90);
- index_addr(denali, (uint32_t)(MODE_11 | 1), 0);
- for (i = 0; i < 5; i++)
- index_addr_read_data(denali, (uint32_t)(MODE_11 | 2),
- &id_bytes[i]);
-
- nand_dbg_print(NAND_DBG_DEBUG,
- "ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
- id_bytes[0], id_bytes[1], id_bytes[2],
- id_bytes[3], id_bytes[4]);
-
- if ((id_bytes[1] & 0xff) == 0xd3) { /* Samsung K9WAG08U1A */
+ if (device_id == 0xd3) { /* Samsung K9WAG08U1A */
/* Set timing register values according to datasheet */
denali_write32(5, denali->flash_reg + ACC_CLKS);
denali_write32(20, denali->flash_reg + RE_2_WE);
@@ -625,7 +558,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
if (FAIL == get_onfi_nand_para(denali))
return FAIL;
} else if (maf_id == 0xEC) { /* Samsung NAND */
- get_samsung_nand_para(denali);
+ get_samsung_nand_para(denali, device_id);
} else if (maf_id == 0x98) { /* Toshiba NAND */
get_toshiba_nand_para(denali);
} else if (maf_id == 0xAD) { /* Hynix NAND */
--
GitLab
From db9a321049ead6424848b1040a714290d5df39d7 Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Fri, 6 Aug 2010 18:02:03 +0800
Subject: [PATCH 248/863] mtd: denali: Remove set_ecc_config function
set_ecc_config function only set ECC_CORRECTION register, so
move register setting to probe function.
Since controller only support 15bit and 8bit ecc correction,
updated nand ecc layout information.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 87 +++++++++++++++++++++------------------
drivers/mtd/nand/denali.h | 1 +
2 files changed, 48 insertions(+), 40 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index a60f3f0186bb9..f20d1b14ea1d9 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -355,17 +355,6 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
denali_write32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
}
-/* configures the initial ECC settings for the controller */
-static void set_ecc_config(struct denali_nand_info *denali)
-{
-#if SUPPORT_8BITECC
- if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) < 4096) ||
- (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) <= 128))
- denali_write32(8, denali->flash_reg + ECC_CORRECTION);
-#endif
-
-}
-
/* queries the NAND device to see what ONFI modes it supports. */
static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
{
@@ -577,8 +566,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
ioread32(denali->flash_reg + CS_SETUP_CNT));
- set_ecc_config(denali);
-
find_valid_banks(denali);
detect_partition_feature(denali);
@@ -1451,6 +1438,13 @@ static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
/* Initialization code to bring the device up to a known good state */
static void denali_hw_init(struct denali_nand_info *denali)
{
+ /* tell driver how many bit controller will skip before
+ * writing ECC code in OOB, this register may be already
+ * set by firmware. So we read this value out.
+ * if this value is 0, just let it be.
+ * */
+ denali->bbtskipbytes = ioread32(denali->flash_reg +
+ SPARE_AREA_SKIP_BYTES);
denali_irq_init(denali);
denali_nand_reset(denali);
denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
@@ -1465,29 +1459,18 @@ static void denali_hw_init(struct denali_nand_info *denali)
denali_write32(1, denali->flash_reg + ECC_ENABLE);
}
-/* ECC layout for SLC devices. Denali spec indicates SLC fixed at 4 bytes */
-#define ECC_BYTES_SLC (4 * (2048 / ECC_SECTOR_SIZE))
-static struct nand_ecclayout nand_oob_slc = {
- .eccbytes = 4,
- .eccpos = { 0, 1, 2, 3 }, /* not used */
- .oobfree = {
- {
- .offset = ECC_BYTES_SLC,
- .length = 64 - ECC_BYTES_SLC
- }
- }
+/* Althogh controller spec said SLC ECC is forceb to be 4bit,
+ * but denali controller in MRST only support 15bit and 8bit ECC
+ * correction
+ * */
+#define ECC_8BITS 14
+static struct nand_ecclayout nand_8bit_oob = {
+ .eccbytes = 14,
};
-#define ECC_BYTES_MLC (14 * (2048 / ECC_SECTOR_SIZE))
-static struct nand_ecclayout nand_oob_mlc_14bit = {
- .eccbytes = 14,
- .eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */
- .oobfree = {
- {
- .offset = ECC_BYTES_MLC,
- .length = 64 - ECC_BYTES_MLC
- }
- }
+#define ECC_15BITS 26
+static struct nand_ecclayout nand_15bit_oob = {
+ .eccbytes = 26,
};
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -1706,14 +1689,38 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
- if (denali->nand.cellinfo & 0xc) {
- denali->nand.ecc.layout = &nand_oob_mlc_14bit;
- denali->nand.ecc.bytes = ECC_BYTES_MLC;
- } else {/* SLC */
- denali->nand.ecc.layout = &nand_oob_slc;
- denali->nand.ecc.bytes = ECC_BYTES_SLC;
+ /* Denali Controller only support 15bit and 8bit ECC in MRST,
+ * so just let controller do 15bit ECC for MLC and 8bit ECC for
+ * SLC if possible.
+ * */
+ if (denali->nand.cellinfo & 0xc &&
+ (denali->mtd.oobsize > (denali->bbtskipbytes +
+ ECC_15BITS * (denali->mtd.writesize /
+ ECC_SECTOR_SIZE)))) {
+ /* if MLC OOB size is large enough, use 15bit ECC*/
+ denali->nand.ecc.layout = &nand_15bit_oob;
+ denali->nand.ecc.bytes = ECC_15BITS;
+ denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+ } else if (denali->mtd.oobsize < (denali->bbtskipbytes +
+ ECC_8BITS * (denali->mtd.writesize /
+ ECC_SECTOR_SIZE))) {
+ printk(KERN_ERR "Your NAND chip OOB is not large enough to"
+ " contain 8bit ECC correction codes");
+ goto failed_nand;
+ } else {
+ denali->nand.ecc.layout = &nand_8bit_oob;
+ denali->nand.ecc.bytes = ECC_8BITS;
+ denali_write32(8, denali->flash_reg + ECC_CORRECTION);
}
+ denali->nand.ecc.layout->eccbytes *=
+ denali->mtd.writesize / ECC_SECTOR_SIZE;
+ denali->nand.ecc.layout->oobfree[0].offset =
+ denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes;
+ denali->nand.ecc.layout->oobfree[0].length =
+ denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes -
+ denali->bbtskipbytes;
+
/* Let driver know the total blocks number and
* how many blocks contained by each nand chip.
* blksperchip will help driver to know how many
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index fcac24199d124..bdf5c2af50001 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -767,6 +767,7 @@ struct denali_nand_info {
uint32_t fwblks; /* represent how many blocks FW used */
uint32_t totalblks;
uint32_t blksperchip;
+ uint32_t bbtskipbytes;
};
#endif /*_LLD_NAND_*/
--
GitLab
From 08b9ab9996c7e582f86da319f43d2dcb8ff55993 Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
Date: Fri, 6 Aug 2010 18:19:09 +0800
Subject: [PATCH 249/863] mtd: denali: Add multi connected NAND support
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/denali.c | 22 +++++++++++++++++++++-
drivers/mtd/nand/denali.h | 1 +
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index f20d1b14ea1d9..1422edda3e71c 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1677,6 +1677,25 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto failed_nand;
}
+ /* support for multi nand
+ * MTD known nothing about multi nand,
+ * so we should tell it the real pagesize
+ * and anything necessery
+ */
+ denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ denali->nand.chipsize <<= (denali->devnum - 1);
+ denali->nand.page_shift += (denali->devnum - 1);
+ denali->nand.pagemask = (denali->nand.chipsize >>
+ denali->nand.page_shift) - 1;
+ denali->nand.bbt_erase_shift += (denali->devnum - 1);
+ denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift;
+ denali->nand.chip_shift += (denali->devnum - 1);
+ denali->mtd.writesize <<= (denali->devnum - 1);
+ denali->mtd.oobsize <<= (denali->devnum - 1);
+ denali->mtd.erasesize <<= (denali->devnum - 1);
+ denali->mtd.size = denali->nand.numchips * denali->nand.chipsize;
+ denali->bbtskipbytes *= denali->devnum;
+
/* second stage of the NAND scan
* this stage requires information regarding ECC and
* bad block management. */
@@ -1713,6 +1732,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali_write32(8, denali->flash_reg + ECC_CORRECTION);
}
+ denali->nand.ecc.bytes *= denali->devnum;
denali->nand.ecc.layout->eccbytes *=
denali->mtd.writesize / ECC_SECTOR_SIZE;
denali->nand.ecc.layout->oobfree[0].offset =
@@ -1738,7 +1758,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.ecc.hwctl = denali_ecc_hwctl;
/* override the default read operations */
- denali->nand.ecc.size = denali->mtd.writesize;
+ denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
denali->nand.ecc.read_page = denali_read_page;
denali->nand.ecc.read_page_raw = denali_read_page_raw;
denali->nand.ecc.write_page = denali_write_page;
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index bdf5c2af50001..b680474e6333f 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -764,6 +764,7 @@ struct denali_nand_info {
int irq_debug_array[32];
int idx;
+ uint32_t devnum; /* represent how many nands connected */
uint32_t fwblks; /* represent how many blocks FW used */
uint32_t totalblks;
uint32_t blksperchip;
--
GitLab
From 938cf997f998f3172e7cb9beafceccdec259b10d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Aug 2010 15:53:04 +0200
Subject: [PATCH 250/863] mxc_nand: remove 0xe00 offset from registers
Add the offset to the register base instead. This is done
in preparation for v3 controller support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index e8dc6468f8bc7..f14f93392491a 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -41,22 +41,22 @@
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
/* Addresses for NFC registers */
-#define NFC_BUF_SIZE 0xE00
-#define NFC_BUF_ADDR 0xE04
-#define NFC_FLASH_ADDR 0xE06
-#define NFC_FLASH_CMD 0xE08
-#define NFC_CONFIG 0xE0A
-#define NFC_ECC_STATUS_RESULT 0xE0C
-#define NFC_RSLTMAIN_AREA 0xE0E
-#define NFC_RSLTSPARE_AREA 0xE10
-#define NFC_WRPROT 0xE12
-#define NFC_V1_UNLOCKSTART_BLKADDR 0xe14
-#define NFC_V1_UNLOCKEND_BLKADDR 0xe16
-#define NFC_V21_UNLOCKSTART_BLKADDR 0xe20
-#define NFC_V21_UNLOCKEND_BLKADDR 0xe22
-#define NFC_NF_WRPRST 0xE18
-#define NFC_CONFIG1 0xE1A
-#define NFC_CONFIG2 0xE1C
+#define NFC_BUF_SIZE 0x00
+#define NFC_BUF_ADDR 0x04
+#define NFC_FLASH_ADDR 0x06
+#define NFC_FLASH_CMD 0x08
+#define NFC_CONFIG 0x0a
+#define NFC_ECC_STATUS_RESULT 0x0c
+#define NFC_RSLTMAIN_AREA 0x0e
+#define NFC_RSLTSPARE_AREA 0x10
+#define NFC_WRPROT 0x12
+#define NFC_V1_UNLOCKSTART_BLKADDR 0x14
+#define NFC_V1_UNLOCKEND_BLKADDR 0x16
+#define NFC_V21_UNLOCKSTART_BLKADDR 0x20
+#define NFC_V21_UNLOCKEND_BLKADDR 0x22
+#define NFC_NF_WRPRST 0x18
+#define NFC_CONFIG1 0x1a
+#define NFC_CONFIG2 0x1c
/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
* for Command operation */
@@ -764,14 +764,14 @@ static int __init mxcnd_probe(struct platform_device *pdev)
host->main_area1 = host->base + 0x200;
if (nfc_is_v21()) {
- host->regs = host->base + 0x1000;
+ host->regs = host->base + 0x1e00;
host->spare0 = host->base + 0x1000;
host->spare_len = 64;
oob_smallpage = &nandv2_hw_eccoob_smallpage;
oob_largepage = &nandv2_hw_eccoob_largepage;
this->ecc.bytes = 9;
} else if (nfc_is_v1()) {
- host->regs = host->base;
+ host->regs = host->base + 0xe00;
host->spare0 = host->base + 0x800;
host->spare_len = 16;
oob_smallpage = &nandv1_hw_eccoob_smallpage;
--
GitLab
From c29c607afa2e94a43f249f19a2d3097e56aaedd7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Aug 2010 15:53:05 +0200
Subject: [PATCH 251/863] mxc_nand: rework get_dev_status
We save/restore the value in the buffer anyway, so it makes
no difference whether we use main_area0 or main_area1. So,
we can use main_area0 and remove main_area1 from the driver
which is otherwise unused. Also, clean up the comments in
get_dev_status.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index f14f93392491a..b6aa7e3a967a9 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -102,7 +102,6 @@ struct mxc_nand_host {
void *spare0;
void *main_area0;
- void *main_area1;
void __iomem *base;
void __iomem *regs;
@@ -305,25 +304,24 @@ static void send_read_id(struct mxc_nand_host *host)
* NAND device status and returns the current status. */
static uint16_t get_dev_status(struct mxc_nand_host *host)
{
- void __iomem *main_buf = host->main_area1;
+ void __iomem *main_buf = host->main_area0;
uint32_t store;
uint16_t ret;
- /* Issue status request to NAND device */
- /* store the main area1 first word, later do recovery */
+ writew(0x0, NFC_V1_V2_BUF_ADDR);
+
+ /*
+ * The device status is stored in main_area0. To
+ * prevent corruption of the buffer save the value
+ * and restore it afterwards.
+ */
store = readl(main_buf);
- /* NANDFC buffer 1 is used for device status to prevent
- * corruption of read/write buffer on status requests. */
- writew(1, host->regs + NFC_BUF_ADDR);
writew(NFC_STATUS, host->regs + NFC_CONFIG2);
-
- /* Wait for operation to complete */
wait_op_done(host, true);
- /* Status is placed in first word of main buffer */
- /* get status, then recovery area 1 data */
ret = readw(main_buf);
+
writel(store, main_buf);
return ret;
@@ -761,7 +759,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
}
host->main_area0 = host->base;
- host->main_area1 = host->base + 0x200;
if (nfc_is_v21()) {
host->regs = host->base + 0x1e00;
--
GitLab
From 5f97304ef12b79f1a466971eefdf93ea3b2d341f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Aug 2010 15:53:06 +0200
Subject: [PATCH 252/863] mxc_nand: make some internally used functions
overwriteable
This patch prepares the driver to add v3 controller support
later. The v3 controller is basically the same controller as v1
and v2, but with a completely different register layout.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 72 ++++++++++++++++++++++---------------
1 file changed, 44 insertions(+), 28 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index b6aa7e3a967a9..5130a85310241 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -115,6 +115,13 @@ struct mxc_nand_host {
uint8_t *data_buf;
unsigned int buf_start;
int spare_len;
+
+ void (*preset)(struct mtd_info *);
+ void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_page)(struct mtd_info *, unsigned int);
+ void (*send_read_id)(struct mxc_nand_host *);
+ uint16_t (*get_dev_status)(struct mxc_nand_host *);
};
/* OOB placement block for use with hardware ecc generation */
@@ -212,7 +219,7 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq)
/* This function issues the specified command to the NAND device and
* waits for completion. */
-static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
{
DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
@@ -241,7 +248,7 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
/* This function sends an address (or partial address) to the
* NAND device. The address is used to select the source/destination for
* a NAND command. */
-static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
+static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
{
DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
@@ -252,7 +259,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
wait_op_done(host, islast);
}
-static void send_page(struct mtd_info *mtd, unsigned int ops)
+static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
@@ -276,7 +283,7 @@ static void send_page(struct mtd_info *mtd, unsigned int ops)
}
/* Request the NANDFC to perform a read of the NAND device ID. */
-static void send_read_id(struct mxc_nand_host *host)
+static void send_read_id_v1_v2(struct mxc_nand_host *host)
{
struct nand_chip *this = &host->nand;
@@ -302,7 +309,7 @@ static void send_read_id(struct mxc_nand_host *host)
/* This function requests the NANDFC to perform a read of the
* NAND device status and returns the current status. */
-static uint16_t get_dev_status(struct mxc_nand_host *host)
+static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
{
void __iomem *main_buf = host->main_area0;
uint32_t store;
@@ -381,7 +388,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
/* Check for status request */
if (host->status_request)
- return get_dev_status(host) & 0xFF;
+ return host->get_dev_status(host) & 0xFF;
ret = *(uint8_t *)(host->data_buf + host->buf_start);
host->buf_start++;
@@ -517,39 +524,39 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
* we will used the saved column address to index into
* the full page.
*/
- send_addr(host, 0, page_addr == -1);
+ host->send_addr(host, 0, page_addr == -1);
if (mtd->writesize > 512)
/* another col addr cycle for 2k page */
- send_addr(host, 0, false);
+ host->send_addr(host, 0, false);
}
/* Write out page address, if necessary */
if (page_addr != -1) {
/* paddr_0 - p_addr_7 */
- send_addr(host, (page_addr & 0xff), false);
+ host->send_addr(host, (page_addr & 0xff), false);
if (mtd->writesize > 512) {
if (mtd->size >= 0x10000000) {
/* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff, false);
- send_addr(host, (page_addr >> 16) & 0xff, true);
+ host->send_addr(host, (page_addr >> 8) & 0xff, false);
+ host->send_addr(host, (page_addr >> 16) & 0xff, true);
} else
/* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff, true);
+ host->send_addr(host, (page_addr >> 8) & 0xff, true);
} else {
/* One more address cycle for higher density devices */
if (mtd->size >= 0x4000000) {
/* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff, false);
- send_addr(host, (page_addr >> 16) & 0xff, true);
+ host->send_addr(host, (page_addr >> 8) & 0xff, false);
+ host->send_addr(host, (page_addr >> 16) & 0xff, true);
} else
/* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff, true);
+ host->send_addr(host, (page_addr >> 8) & 0xff, true);
}
}
}
-static void preset(struct mtd_info *mtd)
+static void preset_v1_v2(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
@@ -602,15 +609,15 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/* Command pre-processing step */
switch (command) {
case NAND_CMD_RESET:
- preset(mtd);
- send_cmd(host, command, false);
+ host->preset(mtd);
+ host->send_cmd(host, command, false);
break;
case NAND_CMD_STATUS:
host->buf_start = 0;
host->status_request = true;
- send_cmd(host, command, true);
+ host->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
@@ -623,13 +630,13 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
command = NAND_CMD_READ0; /* only READ0 is valid */
- send_cmd(host, command, false);
+ host->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
if (mtd->writesize > 512)
- send_cmd(host, NAND_CMD_READSTART, true);
+ host->send_cmd(host, NAND_CMD_READSTART, true);
- send_page(mtd, NFC_OUTPUT);
+ host->send_page(mtd, NFC_OUTPUT);
memcpy(host->data_buf, host->main_area0, mtd->writesize);
copy_spare(mtd, true);
@@ -642,28 +649,28 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
host->buf_start = column;
- send_cmd(host, command, false);
+ host->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
case NAND_CMD_PAGEPROG:
memcpy(host->main_area0, host->data_buf, mtd->writesize);
copy_spare(mtd, false);
- send_page(mtd, NFC_INPUT);
- send_cmd(host, command, true);
+ host->send_page(mtd, NFC_INPUT);
+ host->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
case NAND_CMD_READID:
- send_cmd(host, command, true);
+ host->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
- send_read_id(host);
+ host->send_read_id(host);
host->buf_start = column;
break;
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
- send_cmd(host, command, false);
+ host->send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
@@ -760,6 +767,15 @@ static int __init mxcnd_probe(struct platform_device *pdev)
host->main_area0 = host->base;
+ if (nfc_is_v1() || nfc_is_v21()) {
+ host->preset = preset_v1_v2;
+ host->send_cmd = send_cmd_v1_v2;
+ host->send_addr = send_addr_v1_v2;
+ host->send_page = send_page_v1_v2;
+ host->send_read_id = send_read_id_v1_v2;
+ host->get_dev_status = get_dev_status_v1_v2;
+ }
+
if (nfc_is_v21()) {
host->regs = host->base + 0x1e00;
host->spare0 = host->base + 0x1000;
--
GitLab
From 7aaf28ac02ff01f4202fc2e8a71ea33775da0f6f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Aug 2010 15:53:07 +0200
Subject: [PATCH 253/863] mxc_nand: factor out a check_int function
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 5130a85310241..ea491140e5522 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -122,6 +122,7 @@ struct mxc_nand_host {
void (*send_page)(struct mtd_info *, unsigned int);
void (*send_read_id)(struct mxc_nand_host *);
uint16_t (*get_dev_status)(struct mxc_nand_host *);
+ int (*check_int)(struct mxc_nand_host *);
};
/* OOB placement block for use with hardware ecc generation */
@@ -181,34 +182,38 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int check_int_v1_v2(struct mxc_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readw(host->regs + NFC_CONFIG2);
+ if (!(tmp & NFC_INT))
+ return 0;
+
+ writew(tmp & ~NFC_INT, NFC_CONFIG2);
+
+ return 1;
+}
+
/* This function polls the NANDFC to wait for the basic operation to
* complete by checking the INT bit of config2 register.
*/
static void wait_op_done(struct mxc_nand_host *host, int useirq)
{
- uint16_t tmp;
int max_retries = 8000;
if (useirq) {
- if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
+ if (!host->check_int(host)) {
enable_irq(host->irq);
- wait_event(host->irq_waitq,
- readw(host->regs + NFC_CONFIG2) & NFC_INT);
-
- tmp = readw(host->regs + NFC_CONFIG2);
- tmp &= ~NFC_INT;
- writew(tmp, host->regs + NFC_CONFIG2);
+ wait_event(host->irq_waitq, host->check_int(host));
}
} else {
while (max_retries-- > 0) {
- if (readw(host->regs + NFC_CONFIG2) & NFC_INT) {
- tmp = readw(host->regs + NFC_CONFIG2);
- tmp &= ~NFC_INT;
- writew(tmp, host->regs + NFC_CONFIG2);
+ if (host->check_int(host))
break;
- }
+
udelay(1);
}
if (max_retries < 0)
@@ -774,6 +779,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
host->send_page = send_page_v1_v2;
host->send_read_id = send_read_id_v1_v2;
host->get_dev_status = get_dev_status_v1_v2;
+ host->check_int = check_int_v1_v2;
}
if (nfc_is_v21()) {
--
GitLab
From 1bc991808da890313c7a23ebc07e68ad8e79f42e Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Aug 2010 15:53:08 +0200
Subject: [PATCH 254/863] mxc_nand: add V1_V2 namespace to registers
This prepares the driver for v3 support. The v3 controller
has a completely different register layout, so add a V1_V2_
namespace to the register defines to avoid confusion with
the v3 regs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 141 ++++++++++++++++--------------------
1 file changed, 63 insertions(+), 78 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index ea491140e5522..6d0fa4cd1ddfc 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -41,58 +41,43 @@
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
/* Addresses for NFC registers */
-#define NFC_BUF_SIZE 0x00
-#define NFC_BUF_ADDR 0x04
-#define NFC_FLASH_ADDR 0x06
-#define NFC_FLASH_CMD 0x08
-#define NFC_CONFIG 0x0a
-#define NFC_ECC_STATUS_RESULT 0x0c
-#define NFC_RSLTMAIN_AREA 0x0e
-#define NFC_RSLTSPARE_AREA 0x10
-#define NFC_WRPROT 0x12
-#define NFC_V1_UNLOCKSTART_BLKADDR 0x14
-#define NFC_V1_UNLOCKEND_BLKADDR 0x16
-#define NFC_V21_UNLOCKSTART_BLKADDR 0x20
-#define NFC_V21_UNLOCKEND_BLKADDR 0x22
-#define NFC_NF_WRPRST 0x18
-#define NFC_CONFIG1 0x1a
-#define NFC_CONFIG2 0x1c
-
-/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Command operation */
-#define NFC_CMD 0x1
-
-/* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Address operation */
-#define NFC_ADDR 0x2
-
-/* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
- * for Input operation */
-#define NFC_INPUT 0x4
-
-/* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
- * for Data Output operation */
-#define NFC_OUTPUT 0x8
-
-/* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
- * for Read ID operation */
-#define NFC_ID 0x10
-
-/* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
- * for Read Status operation */
-#define NFC_STATUS 0x20
-
-/* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation */
-#define NFC_INT 0x8000
-
-#define NFC_SP_EN (1 << 2)
-#define NFC_ECC_EN (1 << 3)
-#define NFC_INT_MSK (1 << 4)
-#define NFC_BIG (1 << 5)
-#define NFC_RST (1 << 6)
-#define NFC_CE (1 << 7)
-#define NFC_ONE_CYCLE (1 << 8)
+#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
+#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04)
+#define NFC_V1_V2_FLASH_ADDR (host->regs + 0x06)
+#define NFC_V1_V2_FLASH_CMD (host->regs + 0x08)
+#define NFC_V1_V2_CONFIG (host->regs + 0x0a)
+#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c)
+#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e)
+#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10)
+#define NFC_V1_V2_WRPROT (host->regs + 0x12)
+#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14)
+#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16)
+#define NFC_V21_UNLOCKSTART_BLKADDR (host->regs + 0x20)
+#define NFC_V21_UNLOCKEND_BLKADDR (host->regs + 0x22)
+#define NFC_V1_V2_NF_WRPRST (host->regs + 0x18)
+#define NFC_V1_V2_CONFIG1 (host->regs + 0x1a)
+#define NFC_V1_V2_CONFIG2 (host->regs + 0x1c)
+
+#define NFC_V1_V2_CONFIG1_SP_EN (1 << 2)
+#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
+#define NFC_V1_V2_CONFIG1_RST (1 << 6)
+#define NFC_V1_V2_CONFIG1_CE (1 << 7)
+#define NFC_V1_V2_CONFIG1_ONE_CYCLE (1 << 8)
+
+#define NFC_V1_V2_CONFIG2_INT (1 << 15)
+
+/*
+ * Operation modes for the NFC. Valid for v1, v2 and v3
+ * type controllers.
+ */
+#define NFC_CMD (1 << 0)
+#define NFC_ADDR (1 << 1)
+#define NFC_INPUT (1 << 2)
+#define NFC_OUTPUT (1 << 3)
+#define NFC_ID (1 << 4)
+#define NFC_STATUS (1 << 5)
struct mxc_nand_host {
struct mtd_info mtd;
@@ -186,11 +171,11 @@ static int check_int_v1_v2(struct mxc_nand_host *host)
{
uint32_t tmp;
- tmp = readw(host->regs + NFC_CONFIG2);
- if (!(tmp & NFC_INT))
+ tmp = readw(NFC_V1_V2_CONFIG2);
+ if (!(tmp & NFC_V1_V2_CONFIG2_INT))
return 0;
- writew(tmp & ~NFC_INT, NFC_CONFIG2);
+ writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
return 1;
}
@@ -228,15 +213,15 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
{
DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
- writew(cmd, host->regs + NFC_FLASH_CMD);
- writew(NFC_CMD, host->regs + NFC_CONFIG2);
+ writew(cmd, NFC_V1_V2_FLASH_CMD);
+ writew(NFC_CMD, NFC_V1_V2_CONFIG2);
if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
int max_retries = 100;
/* Reset completion is indicated by NFC_CONFIG2 */
/* being set to 0 */
while (max_retries-- > 0) {
- if (readw(host->regs + NFC_CONFIG2) == 0) {
+ if (readw(NFC_V1_V2_CONFIG2) == 0) {
break;
}
udelay(1);
@@ -257,8 +242,8 @@ static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islas
{
DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
- writew(addr, host->regs + NFC_FLASH_ADDR);
- writew(NFC_ADDR, host->regs + NFC_CONFIG2);
+ writew(addr, NFC_V1_V2_FLASH_ADDR);
+ writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
/* Wait for operation to complete */
wait_op_done(host, islast);
@@ -278,9 +263,9 @@ static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
for (i = 0; i < bufs; i++) {
/* NANDFC buffer 0 is used for page read/write */
- writew(i, host->regs + NFC_BUF_ADDR);
+ writew(i, NFC_V1_V2_BUF_ADDR);
- writew(ops, host->regs + NFC_CONFIG2);
+ writew(ops, NFC_V1_V2_CONFIG2);
/* Wait for operation to complete */
wait_op_done(host, true);
@@ -293,9 +278,9 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host)
struct nand_chip *this = &host->nand;
/* NANDFC buffer 0 is used for device ID output */
- writew(0x0, host->regs + NFC_BUF_ADDR);
+ writew(0x0, NFC_V1_V2_BUF_ADDR);
- writew(NFC_ID, host->regs + NFC_CONFIG2);
+ writew(NFC_ID, NFC_V1_V2_CONFIG2);
/* Wait for operation to complete */
wait_op_done(host, true);
@@ -329,7 +314,7 @@ static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
*/
store = readl(main_buf);
- writew(NFC_STATUS, host->regs + NFC_CONFIG2);
+ writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
wait_op_done(host, true);
ret = readw(main_buf);
@@ -368,7 +353,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
* additional correction. 2-Bit errors cannot be corrected by
* HW ECC, so we need to return failure
*/
- uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT);
+ uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
DEBUG(MTD_DEBUG_LEVEL0,
@@ -568,32 +553,32 @@ static void preset_v1_v2(struct mtd_info *mtd)
uint16_t tmp;
/* enable interrupt, disable spare enable */
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_INT_MSK;
- tmp &= ~NFC_SP_EN;
+ tmp = readw(NFC_V1_V2_CONFIG1);
+ tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
+ tmp &= ~NFC_V1_V2_CONFIG1_SP_EN;
if (nand_chip->ecc.mode == NAND_ECC_HW) {
- tmp |= NFC_ECC_EN;
+ tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
} else {
- tmp &= ~NFC_ECC_EN;
+ tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
}
- writew(tmp, host->regs + NFC_CONFIG1);
+ writew(tmp, NFC_V1_V2_CONFIG1);
/* preset operation */
/* Unlock the internal RAM Buffer */
- writew(0x2, host->regs + NFC_CONFIG);
+ writew(0x2, NFC_V1_V2_CONFIG);
/* Blocks to be unlocked */
if (nfc_is_v21()) {
- writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
- writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR);
} else if (nfc_is_v1()) {
- writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
+ writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
+ writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
} else
BUG();
/* Unlock Block Command for given address range */
- writew(0x4, host->regs + NFC_WRPROT);
+ writew(0x4, NFC_V1_V2_WRPROT);
}
/* Used by the upper layer to write command to NAND Flash for
--
GitLab
From 94f77e50d658be1d3ff23fb65e4d075a6f4ebee3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Aug 2010 15:53:09 +0200
Subject: [PATCH 255/863] mxc_nand: fix correct_data function
The v2 controller has a totally different mechanism to check
whether the data we read had ecc errors or not. Implement this.
The mechanism in the v2 controller happens to be identical to
the v3 controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 42 +++++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 6d0fa4cd1ddfc..f5fd25461a099 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -94,6 +94,7 @@ struct mxc_nand_host {
struct clk *clk;
int clk_act;
int irq;
+ int eccsize;
wait_queue_head_t irq_waitq;
@@ -342,7 +343,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
*/
}
-static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
struct nand_chip *nand_chip = mtd->priv;
@@ -364,6 +365,40 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
return 0;
}
+static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ u32 ecc_stat, err;
+ int no_subpages = 1;
+ int ret = 0;
+ u8 ecc_bit_mask, err_limit;
+
+ ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
+ err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
+
+ no_subpages = mtd->writesize >> 9;
+
+ ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT);
+
+ do {
+ err = ecc_stat & ecc_bit_mask;
+ if (err > err_limit) {
+ printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
+ return -1;
+ } else {
+ ret += err;
+ }
+ ecc_stat >>= 4;
+ } while (--no_subpages);
+
+ mtd->ecc_stats.corrected += ret;
+ pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+
+ return ret;
+}
+
static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
@@ -790,7 +825,10 @@ static int __init mxcnd_probe(struct platform_device *pdev)
if (pdata->hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
- this->ecc.correct = mxc_nand_correct_data;
+ if (nfc_is_v1())
+ this->ecc.correct = mxc_nand_correct_data_v1;
+ else
+ this->ecc.correct = mxc_nand_correct_data_v2_v3;
this->ecc.mode = NAND_ECC_HW;
} else {
this->ecc.mode = NAND_ECC_SOFT;
--
GitLab
From 6e85dfdc19ef526edec285aed47c83934882e9bd Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Aug 2010 15:53:10 +0200
Subject: [PATCH 256/863] mxc_nand: support 8bit ecc
Nand devices with at least 26 bytes of oob data per 512 byte block
can have 8bit ecc on v2 type controllers. This is currently not tested,
but at least this patch puts the ECC_MODE bit into a well defined state.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/mxc_nand.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index f5fd25461a099..1433a83891096 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -58,6 +58,7 @@
#define NFC_V1_V2_CONFIG1 (host->regs + 0x1a)
#define NFC_V1_V2_CONFIG2 (host->regs + 0x1c)
+#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
#define NFC_V1_V2_CONFIG1_SP_EN (1 << 2)
#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
@@ -581,6 +582,23 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
}
}
+/*
+ * v2 and v3 type controllers can do 4bit or 8bit ecc depending
+ * on how much oob the nand chip has. For 8bit ecc we need at least
+ * 26 bytes of oob data per 512 byte block.
+ */
+static int get_eccsize(struct mtd_info *mtd)
+{
+ int oobbytes_per_512 = 0;
+
+ oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
+
+ if (oobbytes_per_512 < 26)
+ return 4;
+ else
+ return 8;
+}
+
static void preset_v1_v2(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
@@ -596,6 +614,15 @@ static void preset_v1_v2(struct mtd_info *mtd)
} else {
tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
}
+
+ if (nfc_is_v21() && mtd->writesize) {
+ host->eccsize = get_eccsize(mtd);
+ if (host->eccsize == 4)
+ tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
+ } else {
+ host->eccsize = 1;
+ }
+
writew(tmp, NFC_V1_V2_CONFIG1);
/* preset operation */
@@ -859,6 +886,9 @@ static int __init mxcnd_probe(struct platform_device *pdev)
goto escan;
}
+ /* Call preset again, with correct writesize this time */
+ host->preset(mtd);
+
if (mtd->writesize == 2048)
this->ecc.layout = oob_largepage;
--
GitLab
From 71ec51554a2c22ff03c7aac6866cdf395099994d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Aug 2010 15:53:11 +0200
Subject: [PATCH 257/863] mxc_nand: Add v3 (i.MX51) Support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/Kconfig | 2 +-
drivers/mtd/nand/mxc_nand.c | 222 +++++++++++++++++++++++++++++++++++-
2 files changed, 222 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 1d69920a2c93d..79afdc1b33771 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -481,7 +481,7 @@ config MTD_NAND_MPC5121_NFC
config MTD_NAND_MXC
tristate "MXC NAND support"
- depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
+ depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
help
This enables the driver for the NAND flash controller on the
MXC processors.
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 1433a83891096..3657a6eb026fc 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -39,6 +39,8 @@
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
+#define nfc_is_v3_2() cpu_is_mx51()
+#define nfc_is_v3() nfc_is_v3_2()
/* Addresses for NFC registers */
#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
@@ -80,6 +82,54 @@
#define NFC_ID (1 << 4)
#define NFC_STATUS (1 << 5)
+#define NFC_V3_FLASH_CMD (host->regs_axi + 0x00)
+#define NFC_V3_FLASH_ADDR0 (host->regs_axi + 0x04)
+
+#define NFC_V3_CONFIG1 (host->regs_axi + 0x34)
+#define NFC_V3_CONFIG1_SP_EN (1 << 0)
+#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7 ) << 4)
+
+#define NFC_V3_ECC_STATUS_RESULT (host->regs_axi + 0x38)
+
+#define NFC_V3_LAUNCH (host->regs_axi + 0x40)
+
+#define NFC_V3_WRPROT (host->regs_ip + 0x0)
+#define NFC_V3_WRPROT_LOCK_TIGHT (1 << 0)
+#define NFC_V3_WRPROT_LOCK (1 << 1)
+#define NFC_V3_WRPROT_UNLOCK (1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
+
+#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0 (host->regs_ip + 0x04)
+
+#define NFC_V3_CONFIG2 (host->regs_ip + 0x24)
+#define NFC_V3_CONFIG2_PS_512 (0 << 0)
+#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
+#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
+#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
+#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
+#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
+
+#define NFC_V3_CONFIG3 (host->regs_ip + 0x28)
+#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8 (1 << 3)
+#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x) (((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
+
+#define NFC_V3_IPC (host->regs_ip + 0x2C)
+#define NFC_V3_IPC_CREQ (1 << 0)
+#define NFC_V3_IPC_INT (1 << 31)
+
+#define NFC_V3_DELAY_LINE (host->regs_ip + 0x34)
+
struct mxc_nand_host {
struct mtd_info mtd;
struct nand_chip nand;
@@ -91,6 +141,8 @@ struct mxc_nand_host {
void __iomem *base;
void __iomem *regs;
+ void __iomem *regs_axi;
+ void __iomem *regs_ip;
int status_request;
struct clk *clk;
int clk_act;
@@ -169,6 +221,20 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int check_int_v3(struct mxc_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_IPC);
+ if (!(tmp & NFC_V3_IPC_INT))
+ return 0;
+
+ tmp &= ~NFC_V3_IPC_INT;
+ writel(tmp, NFC_V3_IPC);
+
+ return 1;
+}
+
static int check_int_v1_v2(struct mxc_nand_host *host)
{
uint32_t tmp;
@@ -209,6 +275,18 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq)
}
}
+static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+ /* fill command */
+ writel(cmd, NFC_V3_FLASH_CMD);
+
+ /* send out command */
+ writel(NFC_CMD, NFC_V3_LAUNCH);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, useirq);
+}
+
/* This function issues the specified command to the NAND device and
* waits for completion. */
static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
@@ -237,6 +315,17 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
}
}
+static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+ /* fill address */
+ writel(addr, NFC_V3_FLASH_ADDR0);
+
+ /* send out address */
+ writel(NFC_ADDR, NFC_V3_LAUNCH);
+
+ wait_op_done(host, 0);
+}
+
/* This function sends an address (or partial address) to the
* NAND device. The address is used to select the source/destination for
* a NAND command. */
@@ -251,6 +340,22 @@ static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islas
wait_op_done(host, islast);
}
+static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_CONFIG1);
+ tmp &= ~(7 << 4);
+ writel(tmp, NFC_V3_CONFIG1);
+
+ /* transfer data from NFC ram to nand */
+ writel(ops, NFC_V3_LAUNCH);
+
+ wait_op_done(host, false);
+}
+
static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
{
struct nand_chip *nand_chip = mtd->priv;
@@ -274,6 +379,16 @@ static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
}
}
+static void send_read_id_v3(struct mxc_nand_host *host)
+{
+ /* Read ID into main buffer */
+ writel(NFC_ID, NFC_V3_LAUNCH);
+
+ wait_op_done(host, true);
+
+ memcpy(host->data_buf, host->main_area0, 16);
+}
+
/* Request the NANDFC to perform a read of the NAND device ID. */
static void send_read_id_v1_v2(struct mxc_nand_host *host)
{
@@ -299,6 +414,14 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host)
memcpy(host->data_buf, host->main_area0, 16);
}
+static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
+{
+ writew(NFC_STATUS, NFC_V3_LAUNCH);
+ wait_op_done(host, true);
+
+ return readl(NFC_V3_CONFIG1) >> 16;
+}
+
/* This function requests the NANDFC to perform a read of the
* NAND device status and returns the current status. */
static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
@@ -381,7 +504,10 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
no_subpages = mtd->writesize >> 9;
- ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT);
+ if (nfc_is_v21())
+ ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT);
+ else
+ ecc_stat = readl(NFC_V3_ECC_STATUS_RESULT);
do {
err = ecc_stat & ecc_bit_mask;
@@ -643,6 +769,72 @@ static void preset_v1_v2(struct mtd_info *mtd)
writew(0x4, NFC_V1_V2_WRPROT);
}
+static void preset_v3(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxc_nand_host *host = chip->priv;
+ uint32_t config2, config3;
+ int i, addr_phases;
+
+ writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
+ writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
+
+ /* Unlock the internal RAM Buffer */
+ writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+ NFC_V3_WRPROT);
+
+ /* Blocks to be unlocked */
+ for (i = 0; i < NAND_MAX_CHIPS; i++)
+ writel(0x0 | (0xffff << 16),
+ NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
+
+ writel(0, NFC_V3_IPC);
+
+ config2 = NFC_V3_CONFIG2_ONE_CYCLE |
+ NFC_V3_CONFIG2_2CMD_PHASES |
+ NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
+ NFC_V3_CONFIG2_ST_CMD(0x70) |
+ NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
+
+ if (chip->ecc.mode == NAND_ECC_HW)
+ config2 |= NFC_V3_CONFIG2_ECC_EN;
+
+ addr_phases = fls(chip->pagemask) >> 3;
+
+ if (mtd->writesize == 2048) {
+ config2 |= NFC_V3_CONFIG2_PS_2048;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+ } else if (mtd->writesize == 4096) {
+ config2 |= NFC_V3_CONFIG2_PS_4096;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+ } else {
+ config2 |= NFC_V3_CONFIG2_PS_512;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
+ }
+
+ if (mtd->writesize) {
+ config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6);
+ host->eccsize = get_eccsize(mtd);
+ if (host->eccsize == 8)
+ config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
+ }
+
+ writel(config2, NFC_V3_CONFIG2);
+
+ config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
+ NFC_V3_CONFIG3_NO_SDMA |
+ NFC_V3_CONFIG3_RBB_MODE |
+ NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+ NFC_V3_CONFIG3_ADD_OP(0);
+
+ if (!(chip->options & NAND_BUSWIDTH_16))
+ config3 |= NFC_V3_CONFIG3_FW8;
+
+ writel(config3, NFC_V3_CONFIG3);
+
+ writel(0, NFC_V3_DELAY_LINE);
+}
+
/* Used by the upper layer to write command to NAND Flash for
* different operations to be carried out on NAND Flash */
static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
@@ -843,6 +1035,30 @@ static int __init mxcnd_probe(struct platform_device *pdev)
oob_smallpage = &nandv1_hw_eccoob_smallpage;
oob_largepage = &nandv1_hw_eccoob_largepage;
this->ecc.bytes = 3;
+ host->eccsize = 1;
+ } else if (nfc_is_v3_2()) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ err = -ENODEV;
+ goto eirq;
+ }
+ host->regs_ip = ioremap(res->start, resource_size(res));
+ if (!host->regs_ip) {
+ err = -ENOMEM;
+ goto eirq;
+ }
+ host->regs_axi = host->base + 0x1e00;
+ host->spare0 = host->base + 0x1000;
+ host->spare_len = 64;
+ host->preset = preset_v3;
+ host->send_cmd = send_cmd_v3;
+ host->send_addr = send_addr_v3;
+ host->send_page = send_page_v3;
+ host->send_read_id = send_read_id_v3;
+ host->check_int = check_int_v3;
+ host->get_dev_status = get_dev_status_v3;
+ oob_smallpage = &nandv2_hw_eccoob_smallpage;
+ oob_largepage = &nandv2_hw_eccoob_largepage;
} else
BUG();
@@ -918,6 +1134,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
escan:
free_irq(host->irq, host);
eirq:
+ if (host->regs_ip)
+ iounmap(host->regs_ip);
iounmap(host->base);
eres:
clk_put(host->clk);
@@ -937,6 +1155,8 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
nand_release(&host->mtd);
free_irq(host->irq, host);
+ if (host->regs_ip)
+ iounmap(host->regs_ip);
iounmap(host->base);
kfree(host);
--
GitLab
From 73ee5760253dc8893502e19a9cb118d25dab21ec Mon Sep 17 00:00:00 2001
From: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Date: Fri, 16 Jul 2010 14:29:08 +0200
Subject: [PATCH 258/863] mtd: remove redwood map driver
Removing the redwood mtd mapping driver, because all REDWOOD_[456]
configuration options were removed from the kernel, because they weren't
referenced anywhere.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/maps/Kconfig | 8 --
drivers/mtd/maps/Makefile | 1 -
drivers/mtd/maps/redwood.c | 174 -------------------------------------
3 files changed, 183 deletions(-)
delete mode 100644 drivers/mtd/maps/redwood.c
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index f22bc9f05ddbf..701d942c67957 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -319,14 +319,6 @@ config MTD_CFI_FLAGADM
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
-config MTD_REDWOOD
- tristate "CFI Flash devices mapped on IBM Redwood"
- depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
- help
- This enables access routines for the flash chips on the IBM
- Redwood board. If you have one of these boards and would like to
- use the flash chips on it, say 'Y'.
-
config MTD_SOLUTIONENGINE
tristate "CFI Flash device mapped on Hitachi SolutionEngine"
depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index bb035cd54c72e..f216bb573713a 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
obj-$(CONFIG_MTD_FORTUNET) += fortunet.o
-obj-$(CONFIG_MTD_REDWOOD) += redwood.o
obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
deleted file mode 100644
index 933c0b63b0167..0000000000000
--- a/drivers/mtd/maps/redwood.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * drivers/mtd/maps/redwood.c
- *
- * FLASH map for the IBM Redwood 4/5/6 boards.
- *
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#if !defined (CONFIG_REDWOOD_6)
-
-#define WINDOW_ADDR 0xffc00000
-#define WINDOW_SIZE 0x00400000
-
-#define RW_PART0_OF 0
-#define RW_PART0_SZ 0x10000
-#define RW_PART1_OF RW_PART0_SZ
-#define RW_PART1_SZ 0x200000 - 0x10000
-#define RW_PART2_OF 0x200000
-#define RW_PART2_SZ 0x10000
-#define RW_PART3_OF 0x210000
-#define RW_PART3_SZ 0x200000 - (0x10000 + 0x20000)
-#define RW_PART4_OF 0x3e0000
-#define RW_PART4_SZ 0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
- {
- .name = "Redwood OpenBIOS Vital Product Data",
- .offset = RW_PART0_OF,
- .size = RW_PART0_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "Redwood kernel",
- .offset = RW_PART1_OF,
- .size = RW_PART1_SZ
- },
- {
- .name = "Redwood OpenBIOS non-volatile storage",
- .offset = RW_PART2_OF,
- .size = RW_PART2_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "Redwood filesystem",
- .offset = RW_PART3_OF,
- .size = RW_PART3_SZ
- },
- {
- .name = "Redwood OpenBIOS",
- .offset = RW_PART4_OF,
- .size = RW_PART4_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- }
-};
-
-#else /* CONFIG_REDWOOD_6 */
-/* FIXME: the window is bigger - armin */
-#define WINDOW_ADDR 0xff800000
-#define WINDOW_SIZE 0x00800000
-
-#define RW_PART0_OF 0
-#define RW_PART0_SZ 0x400000 /* 4 MiB data */
-#define RW_PART1_OF RW_PART0_OF + RW_PART0_SZ
-#define RW_PART1_SZ 0x10000 /* 64K VPD */
-#define RW_PART2_OF RW_PART1_OF + RW_PART1_SZ
-#define RW_PART2_SZ 0x400000 - (0x10000 + 0x20000)
-#define RW_PART3_OF RW_PART2_OF + RW_PART2_SZ
-#define RW_PART3_SZ 0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
- {
- .name = "Redwood filesystem",
- .offset = RW_PART0_OF,
- .size = RW_PART0_SZ
- },
- {
- .name = "Redwood OpenBIOS Vital Product Data",
- .offset = RW_PART1_OF,
- .size = RW_PART1_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "Redwood kernel",
- .offset = RW_PART2_OF,
- .size = RW_PART2_SZ
- },
- {
- .name = "Redwood OpenBIOS",
- .offset = RW_PART3_OF,
- .size = RW_PART3_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- }
-};
-
-#endif /* CONFIG_REDWOOD_6 */
-
-struct map_info redwood_flash_map = {
- .name = "IBM Redwood",
- .size = WINDOW_SIZE,
- .bankwidth = 2,
- .phys = WINDOW_ADDR,
-};
-
-
-#define NUM_REDWOOD_FLASH_PARTITIONS ARRAY_SIZE(redwood_flash_partitions)
-
-static struct mtd_info *redwood_mtd;
-
-static int __init init_redwood_flash(void)
-{
- int err;
-
- printk(KERN_NOTICE "redwood: flash mapping: %x at %x\n",
- WINDOW_SIZE, WINDOW_ADDR);
-
- redwood_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
- if (!redwood_flash_map.virt) {
- printk("init_redwood_flash: failed to ioremap\n");
- return -EIO;
- }
- simple_map_init(&redwood_flash_map);
-
- redwood_mtd = do_map_probe("cfi_probe",&redwood_flash_map);
-
- if (redwood_mtd) {
- redwood_mtd->owner = THIS_MODULE;
- err = add_mtd_partitions(redwood_mtd,
- redwood_flash_partitions,
- NUM_REDWOOD_FLASH_PARTITIONS);
- if (err) {
- printk("init_redwood_flash: add_mtd_partitions failed\n");
- iounmap(redwood_flash_map.virt);
- }
- return err;
-
- }
-
- iounmap(redwood_flash_map.virt);
- return -ENXIO;
-}
-
-static void __exit cleanup_redwood_flash(void)
-{
- if (redwood_mtd) {
- del_mtd_partitions(redwood_mtd);
- /* moved iounmap after map_destroy - armin */
- map_destroy(redwood_mtd);
- iounmap((void *)redwood_flash_map.virt);
- }
-}
-
-module_init(init_redwood_flash);
-module_exit(cleanup_redwood_flash);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("MontaVista Software <source@mvista.com>");
-MODULE_DESCRIPTION("MTD map driver for the IBM Redwood reference boards");
--
GitLab
From 51e9ac77035a3dfcb6fc0a88a0d80b6f99b5edb1 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Sat, 7 Aug 2010 21:17:00 +1000
Subject: [PATCH 259/863] md/raid10: fix deadlock with unaligned read during
resync
If the 'bio_split' path in raid10-read is used while
resync/recovery is happening it is possible to deadlock.
Fix this be elevating ->nr_waiting for the duration of both
parts of the split request.
This fixes a bug that has been present since 2.6.22
but has only started manifesting recently for unknown reasons.
It is suitable for and -stable since then.
Reported-by: Justin Bronder <jsbronder@gentoo.org>
Tested-by: Justin Bronder <jsbronder@gentoo.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
---
drivers/md/raid10.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 42e64e4e5e250..d1d6891263469 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -825,11 +825,29 @@ static int make_request(mddev_t *mddev, struct bio * bio)
*/
bp = bio_split(bio,
chunk_sects - (bio->bi_sector & (chunk_sects - 1)) );
+
+ /* Each of these 'make_request' calls will call 'wait_barrier'.
+ * If the first succeeds but the second blocks due to the resync
+ * thread raising the barrier, we will deadlock because the
+ * IO to the underlying device will be queued in generic_make_request
+ * and will never complete, so will never reduce nr_pending.
+ * So increment nr_waiting here so no new raise_barriers will
+ * succeed, and so the second wait_barrier cannot block.
+ */
+ spin_lock_irq(&conf->resync_lock);
+ conf->nr_waiting++;
+ spin_unlock_irq(&conf->resync_lock);
+
if (make_request(mddev, &bp->bio1))
generic_make_request(&bp->bio1);
if (make_request(mddev, &bp->bio2))
generic_make_request(&bp->bio2);
+ spin_lock_irq(&conf->resync_lock);
+ conf->nr_waiting--;
+ wake_up(&conf->wait_barrier);
+ spin_unlock_irq(&conf->resync_lock);
+
bio_pair_release(bp);
return 0;
bad_map:
--
GitLab
From 664a717d3ac5871efc1fd3bb5a32c552dc339d3f Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Wed, 2 Jun 2010 12:57:58 -0700
Subject: [PATCH 260/863] cciss: enqueue and submit io
Clean up some code where we subit our io. The same 5 lines appeared
several times. Also helps for a following patch.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 38 +++++++++++++++-----------------------
1 file changed, 15 insertions(+), 23 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 51ceaee98f9fe..6db790c2802ff 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -257,6 +257,17 @@ static inline void removeQ(CommandList_struct *c)
hlist_del_init(&c->list);
}
+static void enqueue_cmd_and_start_io(ctlr_info_t *h,
+ CommandList_struct *c)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&h->lock, flags);
+ addQ(&h->reqQ, c);
+ h->Qdepth++;
+ start_io(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
static void cciss_free_sg_chain_blocks(SGDescriptor_struct **cmd_sg_list,
int nr_cmds)
{
@@ -1377,7 +1388,6 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
CommandList_struct *c;
char *buff = NULL;
u64bit temp64;
- unsigned long flags;
DECLARE_COMPLETION_ONSTACK(wait);
if (!arg)
@@ -1449,13 +1459,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
}
c->waiting = &wait;
- /* Put the request on the tail of the request queue */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&host->reqQ, c);
- host->Qdepth++;
- start_io(host);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-
+ enqueue_cmd_and_start_io(host, c);
wait_for_completion(&wait);
/* unlock the buffers from DMA */
@@ -1495,7 +1499,6 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned char **buff = NULL;
int *buff_size = NULL;
u64bit temp64;
- unsigned long flags;
BYTE sg_used = 0;
int status = 0;
int i;
@@ -1602,12 +1605,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
}
}
c->waiting = &wait;
- /* Put the request on the tail of the request queue */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&host->reqQ, c);
- host->Qdepth++;
- start_io(host);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ enqueue_cmd_and_start_io(host, c);
wait_for_completion(&wait);
/* unlock the buffers from DMA */
for (i = 0; i < sg_used; i++) {
@@ -1729,8 +1727,8 @@ static void cciss_softirq_done(struct request *rq)
CommandList_struct *cmd = rq->completion_data;
ctlr_info_t *h = hba[cmd->ctlr];
SGDescriptor_struct *curr_sg = cmd->SG;
- unsigned long flags;
u64bit temp64;
+ unsigned long flags;
int i, ddir;
int sg_index = 0;
@@ -2679,17 +2677,11 @@ static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
{
DECLARE_COMPLETION_ONSTACK(wait);
u64bit buff_dma_handle;
- unsigned long flags;
int return_status = IO_OK;
resend_cmd2:
c->waiting = &wait;
- /* Put the request on the tail of the queue and send it */
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- addQ(&h->reqQ, c);
- h->Qdepth++;
- start_io(h);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
--
GitLab
From 0c2b39087c900bdb240b50ac95ee9da00d844565 Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Wed, 2 Jun 2010 12:58:00 -0700
Subject: [PATCH 261/863] cciss: clean up interrupt handler
Simplify the interrupt handler code to more closely match hpsa and to
hopefully make it easier to follow.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 236 +++++++++++++++++++++++++-----------------
1 file changed, 141 insertions(+), 95 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 6db790c2802ff..cae6a13832823 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -167,7 +167,8 @@ static DEFINE_MUTEX(scan_mutex);
static LIST_HEAD(scan_q);
static void do_cciss_request(struct request_queue *q);
-static irqreturn_t do_cciss_intr(int irq, void *dev_id);
+static irqreturn_t do_cciss_intx(int irq, void *dev_id);
+static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id);
static int cciss_open(struct block_device *bdev, fmode_t mode);
static int cciss_release(struct gendisk *disk, fmode_t mode);
static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
@@ -197,7 +198,6 @@ static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
int attempt_retry);
static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
-static void fail_all_cmds(unsigned long ctlr);
static int add_to_scan_list(struct ctlr_info *h);
static int scan_thread(void *data);
static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
@@ -3124,6 +3124,34 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
blk_complete_request(cmd->rq);
}
+static inline u32 cciss_tag_contains_index(u32 tag)
+{
+#define DIRECT_LOOKUP_BIT 0x04
+ return tag & DIRECT_LOOKUP_BIT;
+}
+
+static inline u32 cciss_tag_to_index(u32 tag)
+{
+#define DIRECT_LOOKUP_SHIFT 3
+ return tag >> DIRECT_LOOKUP_SHIFT;
+}
+
+static inline u32 cciss_tag_discard_error_bits(u32 tag)
+{
+#define CCISS_ERROR_BITS 0x03
+ return tag & ~CCISS_ERROR_BITS;
+}
+
+static inline void cciss_mark_tag_indexed(u32 *tag)
+{
+ *tag |= DIRECT_LOOKUP_BIT;
+}
+
+static inline void cciss_set_tag_index(u32 *tag, u32 index)
+{
+ *tag |= (index << DIRECT_LOOKUP_SHIFT);
+}
+
/*
* Get a request and submit it to the controller.
*/
@@ -3172,8 +3200,8 @@ static void do_cciss_request(struct request_queue *q)
/* got command from pool, so use the command block index instead */
/* for direct lookups. */
/* The first 2 bits are reserved for controller error reporting. */
- c->Header.Tag.lower = (c->cmdindex << 3);
- c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */
+ cciss_set_tag_index(&c->Header.Tag.lower, c->cmdindex);
+ cciss_mark_tag_indexed(&c->Header.Tag.lower);
memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
c->Request.CDBLen = 10; /* 12 byte commands not in FW yet; */
c->Request.Type.Type = TYPE_CMD; /* It is a command. */
@@ -3306,15 +3334,73 @@ static inline int interrupt_pending(ctlr_info_t *h)
static inline long interrupt_not_for_us(ctlr_info_t *h)
{
return (((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0)));
+ (h->interrupts_enabled == 0)));
}
-static irqreturn_t do_cciss_intr(int irq, void *dev_id)
+static inline int bad_tag(ctlr_info_t *h, u32 tag_index,
+ u32 raw_tag)
{
- ctlr_info_t *h = dev_id;
+ if (unlikely(tag_index >= h->nr_cmds)) {
+ dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
+ return 1;
+ }
+ return 0;
+}
+
+static inline void finish_cmd(ctlr_info_t *h, CommandList_struct *c,
+ u32 raw_tag)
+{
+ removeQ(c);
+ if (likely(c->cmd_type == CMD_RWREQ))
+ complete_command(h, c, 0);
+ else if (c->cmd_type == CMD_IOCTL_PEND)
+ complete(c->waiting);
+#ifdef CONFIG_CISS_SCSI_TAPE
+ else if (c->cmd_type == CMD_SCSI)
+ complete_scsi_command(c, 0, raw_tag);
+#endif
+}
+
+/* process completion of an indexed ("direct lookup") command */
+static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag)
+{
+ u32 tag_index;
CommandList_struct *c;
+
+ tag_index = cciss_tag_to_index(raw_tag);
+ if (bad_tag(h, tag_index, raw_tag))
+ return get_next_completion(h);
+ c = h->cmd_pool + tag_index;
+ finish_cmd(h, c, raw_tag);
+ return get_next_completion(h);
+}
+
+/* process completion of a non-indexed command */
+static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag)
+{
+ u32 tag;
+ CommandList_struct *c = NULL;
+ struct hlist_node *tmp;
+ __u32 busaddr_masked, tag_masked;
+
+ tag = cciss_tag_discard_error_bits(raw_tag);
+ hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+ busaddr_masked = cciss_tag_discard_error_bits(c->busaddr);
+ tag_masked = cciss_tag_discard_error_bits(tag);
+ if (busaddr_masked == tag_masked) {
+ finish_cmd(h, c, raw_tag);
+ return get_next_completion(h);
+ }
+ }
+ bad_tag(h, h->nr_cmds + 1, raw_tag);
+ return get_next_completion(h);
+}
+
+static irqreturn_t do_cciss_intx(int irq, void *dev_id)
+{
+ ctlr_info_t *h = dev_id;
unsigned long flags;
- __u32 a, a1, a2;
+ u32 raw_tag;
if (interrupt_not_for_us(h))
return IRQ_NONE;
@@ -3324,50 +3410,41 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id)
*/
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
while (interrupt_pending(h)) {
- while ((a = get_next_completion(h)) != FIFO_EMPTY) {
- a1 = a;
- if ((a & 0x04)) {
- a2 = (a >> 3);
- if (a2 >= h->nr_cmds) {
- printk(KERN_WARNING
- "cciss: controller cciss%d failed, stopping.\n",
- h->ctlr);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- fail_all_cmds(h->ctlr);
- return IRQ_HANDLED;
- }
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY) {
+ if (cciss_tag_contains_index(raw_tag))
+ raw_tag = process_indexed_cmd(h, raw_tag);
+ else
+ raw_tag = process_nonindexed_cmd(h, raw_tag);
+ }
+ }
- c = h->cmd_pool + a2;
- a = c->busaddr;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return IRQ_HANDLED;
+}
- } else {
- struct hlist_node *tmp;
+/* Add a second interrupt handler for MSI/MSI-X mode. In this mode we never
+ * check the interrupt pending register because it is not set.
+ */
+static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id)
+{
+ ctlr_info_t *h = dev_id;
+ unsigned long flags;
+ u32 raw_tag;
- a &= ~3;
- c = NULL;
- hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
- if (c->busaddr == a)
- break;
- }
- }
- /*
- * If we've found the command, take it off the
- * completion Q and free it
- */
- if (c && c->busaddr == a) {
- removeQ(c);
- if (c->cmd_type == CMD_RWREQ) {
- complete_command(h, c, 0);
- } else if (c->cmd_type == CMD_IOCTL_PEND) {
- complete(c->waiting);
- }
-# ifdef CONFIG_CISS_SCSI_TAPE
- else if (c->cmd_type == CMD_SCSI)
- complete_scsi_command(c, 0, a1);
-# endif
- continue;
- }
- }
+ if (interrupt_not_for_us(h))
+ return IRQ_NONE;
+ /*
+ * If there are completed commands in the completion queue,
+ * we had better do something about it.
+ */
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY) {
+ if (cciss_tag_contains_index(raw_tag))
+ raw_tag = process_indexed_cmd(h, raw_tag);
+ else
+ raw_tag = process_nonindexed_cmd(h, raw_tag);
}
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
@@ -4230,11 +4307,21 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
/* make sure the board interrupts are off */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
- if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr,
- IRQF_DISABLED | IRQF_SHARED, hba[i]->devname, hba[i])) {
- printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
- hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
- goto clean2;
+ if (hba[i]->msi_vector || hba[i]->msix_vector) {
+ if (request_irq(hba[i]->intr[SIMPLE_MODE_INT],
+ do_cciss_msix_intr,
+ IRQF_DISABLED, hba[i]->devname, hba[i])) {
+ printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
+ hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
+ goto clean2;
+ }
+ } else {
+ if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intx,
+ IRQF_DISABLED, hba[i]->devname, hba[i])) {
+ printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
+ hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
+ goto clean2;
+ }
}
printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
@@ -4534,46 +4621,5 @@ static void __exit cciss_cleanup(void)
bus_unregister(&cciss_bus_type);
}
-static void fail_all_cmds(unsigned long ctlr)
-{
- /* If we get here, the board is apparently dead. */
- ctlr_info_t *h = hba[ctlr];
- CommandList_struct *c;
- unsigned long flags;
-
- printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr);
- h->alive = 0; /* the controller apparently died... */
-
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
-
- pci_disable_device(h->pdev); /* Make sure it is really dead. */
-
- /* move everything off the request queue onto the completed queue */
- while (!hlist_empty(&h->reqQ)) {
- c = hlist_entry(h->reqQ.first, CommandList_struct, list);
- removeQ(c);
- h->Qdepth--;
- addQ(&h->cmpQ, c);
- }
-
- /* Now, fail everything on the completed queue with a HW error */
- while (!hlist_empty(&h->cmpQ)) {
- c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
- removeQ(c);
- if (c->cmd_type != CMD_MSG_STALE)
- c->err_info->CommandStatus = CMD_HARDWARE_ERR;
- if (c->cmd_type == CMD_RWREQ) {
- complete_command(h, c, 0);
- } else if (c->cmd_type == CMD_IOCTL_PEND)
- complete(c->waiting);
-#ifdef CONFIG_CISS_SCSI_TAPE
- else if (c->cmd_type == CMD_SCSI)
- complete_scsi_command(c, 0, 0);
-#endif
- }
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return;
-}
-
module_init(cciss_init);
module_exit(cciss_cleanup);
--
GitLab
From 2cf3af1c9ec26f8db3f386e48f9d979ad8bb3eff Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Wed, 2 Jun 2010 12:58:02 -0700
Subject: [PATCH 262/863] cciss: check for msi in interrupt_not_for_us
Check to see if h->msi[x]_vector is set. We need this for a following
patch. Without this check we process one interrupt then stop because in
msi[x] mode the interrupt pending bit is not set. Not sure why we didn't
encounter this before.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index cae6a13832823..cd830cb64a5d4 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3333,8 +3333,9 @@ static inline int interrupt_pending(ctlr_info_t *h)
static inline long interrupt_not_for_us(ctlr_info_t *h)
{
- return (((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0)));
+ return !(h->msi_vector || h->msix_vector) &&
+ ((h->access.intr_pending(h) == 0) ||
+ (h->interrupts_enabled == 0));
}
static inline int bad_tag(ctlr_info_t *h, u32 tag_index,
--
GitLab
From 1d1414419f034702bf587accdf2a9ac53245e000 Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Wed, 2 Jun 2010 12:58:04 -0700
Subject: [PATCH 263/863] cciss: make interrupt access methods return type bool
Change the return type of our interrupt access routines to bool from
unsigned long. It makes more sense that way.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index c5d411174db0f..c527932d223a5 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -25,7 +25,7 @@ struct access_method {
void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
unsigned long (*fifo_full)(ctlr_info_t *h);
- unsigned long (*intr_pending)(ctlr_info_t *h);
+ bool (*intr_pending)(ctlr_info_t *h);
unsigned long (*command_completed)(ctlr_info_t *h);
};
typedef struct _drive_info_struct
@@ -253,7 +253,7 @@ static unsigned long SA5_completed(ctlr_info_t *h)
/*
* Returns true if an interrupt is pending..
*/
-static unsigned long SA5_intr_pending(ctlr_info_t *h)
+static bool SA5_intr_pending(ctlr_info_t *h)
{
unsigned long register_value =
readl(h->vaddr + SA5_INTR_STATUS);
@@ -268,7 +268,7 @@ static unsigned long SA5_intr_pending(ctlr_info_t *h)
/*
* Returns true if an interrupt is pending..
*/
-static unsigned long SA5B_intr_pending(ctlr_info_t *h)
+static bool SA5B_intr_pending(ctlr_info_t *h)
{
unsigned long register_value =
readl(h->vaddr + SA5_INTR_STATUS);
--
GitLab
From 5e216153c34ac21781110795284a784037f808e3 Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Wed, 2 Jun 2010 12:58:06 -0700
Subject: [PATCH 264/863] cciss: add performant mode support for Stars/Sirius
Add a mode of controller operation called Performant Mode. Even though
cciss has been deprecated in favor of hpsa there are new controllers due
out next year that HP must support in older vendor distros. Vendors
require all fixes/features be upstream. These new controllers support
only 16 commands in simple mode but support up to 1024 in performant mode.
This requires us to add this support at this late date.
The performant mode transport minimizes host PCI accesses by performinf
many completions per read. PCI writes are posted so the host can write
then immediately get off the bus not waiting for the writwe to complete to
the target. In the context of performant mode the host read out to a
controller pulls all posted writes into host memory ensuring the reply
queue is coherent.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 267 ++++++++++++++++++++++++++++++-------
drivers/block/cciss.h | 109 ++++++++++++++-
drivers/block/cciss_cmd.h | 34 ++++-
drivers/block/cciss_scsi.c | 6 +-
4 files changed, 353 insertions(+), 63 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index cd830cb64a5d4..08a2e619dc36e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -206,6 +206,11 @@ static void cciss_device_release(struct device *dev);
static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
+/* performant mode helper functions */
+static void calc_bucket_map(int *bucket, int num_buckets, int nsgs,
+ int *bucket_map);
+static void cciss_put_controller_into_performant_mode(ctlr_info_t *h);
+
#ifdef CONFIG_PROC_FS
static void cciss_procinit(int i);
#else
@@ -231,6 +236,16 @@ static const struct block_device_operations cciss_fops = {
.revalidate_disk = cciss_revalidate,
};
+/* set_performant_mode: Modify the tag for cciss performant
+ * set bit 0 for pull model, bits 3-1 for block fetch
+ * register number
+ */
+static void set_performant_mode(ctlr_info_t *h, CommandList_struct *c)
+{
+ if (likely(h->transMethod == CFGTBL_Trans_Performant))
+ c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
+}
+
/*
* Enqueuing and dequeuing functions for cmdlists.
*/
@@ -261,6 +276,7 @@ static void enqueue_cmd_and_start_io(ctlr_info_t *h,
CommandList_struct *c)
{
unsigned long flags;
+ set_performant_mode(h, c);
spin_lock_irqsave(&h->lock, flags);
addQ(&h->reqQ, c);
h->Qdepth++;
@@ -350,6 +366,28 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
#ifdef CONFIG_PROC_FS
+static inline u32 next_command(ctlr_info_t *h)
+{
+ u32 a;
+
+ if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
+ return h->access.command_completed(h);
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ a = *(h->reply_pool_head); /* Next cmd in ring buffer */
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ a = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+ return a;
+}
+
/*
* Report information about this controller.
*/
@@ -377,7 +415,7 @@ static void cciss_seq_show_header(struct seq_file *seq)
h->product_name,
(unsigned long)h->board_id,
h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+ h->firm_ver[3], (unsigned int)h->intr[PERF_MODE_INT],
h->num_luns,
h->Qdepth, h->commands_outstanding,
h->maxQsinceinit, h->max_outstanding, h->maxSG);
@@ -3126,13 +3164,13 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
static inline u32 cciss_tag_contains_index(u32 tag)
{
-#define DIRECT_LOOKUP_BIT 0x04
+#define DIRECT_LOOKUP_BIT 0x10
return tag & DIRECT_LOOKUP_BIT;
}
static inline u32 cciss_tag_to_index(u32 tag)
{
-#define DIRECT_LOOKUP_SHIFT 3
+#define DIRECT_LOOKUP_SHIFT 5
return tag >> DIRECT_LOOKUP_SHIFT;
}
@@ -3262,9 +3300,12 @@ static void do_cciss_request(struct request_queue *q)
blk_rq_sectors(creq), seg, chained);
#endif /* CCISS_DEBUG */
- c->Header.SGList = c->Header.SGTotal = seg + chained;
- if (seg > h->max_cmd_sgentries)
+ c->Header.SGTotal = seg + chained;
+ if (seg <= h->max_cmd_sgentries)
+ c->Header.SGList = c->Header.SGTotal;
+ else
c->Header.SGList = h->max_cmd_sgentries;
+ set_performant_mode(h, c);
if (likely(blk_fs_request(creq))) {
if(h->cciss_read == CCISS_READ_10) {
@@ -3370,10 +3411,10 @@ static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag)
tag_index = cciss_tag_to_index(raw_tag);
if (bad_tag(h, tag_index, raw_tag))
- return get_next_completion(h);
+ return next_command(h);
c = h->cmd_pool + tag_index;
finish_cmd(h, c, raw_tag);
- return get_next_completion(h);
+ return next_command(h);
}
/* process completion of a non-indexed command */
@@ -3390,11 +3431,11 @@ static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag)
tag_masked = cciss_tag_discard_error_bits(tag);
if (busaddr_masked == tag_masked) {
finish_cmd(h, c, raw_tag);
- return get_next_completion(h);
+ return next_command(h);
}
}
bad_tag(h, h->nr_cmds + 1, raw_tag);
- return get_next_completion(h);
+ return next_command(h);
}
static irqreturn_t do_cciss_intx(int irq, void *dev_id)
@@ -3700,6 +3741,155 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
return -1;
}
+/* Fill in bucket_map[], given nsgs (the max number of
+ * scatter gather elements supported) and bucket[],
+ * which is an array of 8 integers. The bucket[] array
+ * contains 8 different DMA transfer sizes (in 16
+ * byte increments) which the controller uses to fetch
+ * commands. This function fills in bucket_map[], which
+ * maps a given number of scatter gather elements to one of
+ * the 8 DMA transfer sizes. The point of it is to allow the
+ * controller to only do as much DMA as needed to fetch the
+ * command, with the DMA transfer size encoded in the lower
+ * bits of the command address.
+ */
+static void calc_bucket_map(int bucket[], int num_buckets,
+ int nsgs, int *bucket_map)
+{
+ int i, j, b, size;
+
+ /* even a command with 0 SGs requires 4 blocks */
+#define MINIMUM_TRANSFER_BLOCKS 4
+#define NUM_BUCKETS 8
+ /* Note, bucket_map must have nsgs+1 entries. */
+ for (i = 0; i <= nsgs; i++) {
+ /* Compute size of a command with i SG entries */
+ size = i + MINIMUM_TRANSFER_BLOCKS;
+ b = num_buckets; /* Assume the biggest bucket */
+ /* Find the bucket that is just big enough */
+ for (j = 0; j < 8; j++) {
+ if (bucket[j] >= size) {
+ b = j;
+ break;
+ }
+ }
+ /* for a command with i SG entries, use bucket b. */
+ bucket_map[i] = b;
+ }
+}
+
+static void
+cciss_put_controller_into_performant_mode(ctlr_info_t *h)
+{
+ int l = 0;
+ __u32 trans_support;
+ __u32 trans_offset;
+ /*
+ * 5 = 1 s/g entry or 4k
+ * 6 = 2 s/g entry or 8k
+ * 8 = 4 s/g entry or 16k
+ * 10 = 6 s/g entry or 24k
+ */
+ int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
+ unsigned long register_value;
+
+ BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
+
+ /* Attempt to put controller into performant mode if supported */
+ /* Does board support performant mode? */
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & PERFORMANT_MODE))
+ return;
+
+ printk(KERN_WARNING "cciss%d: Placing controller into "
+ "performant mode\n", h->ctlr);
+ /* Performant mode demands commands on a 32 byte boundary
+ * pci_alloc_consistent aligns on page boundarys already.
+ * Just need to check if divisible by 32
+ */
+ if ((sizeof(CommandList_struct) % 32) != 0) {
+ printk(KERN_WARNING "%s %d %s\n",
+ "cciss info: command size[",
+ (int)sizeof(CommandList_struct),
+ "] not divisible by 32, no performant mode..\n");
+ return;
+ }
+
+ /* Performant mode ring buffer and supporting data structures */
+ h->reply_pool = (__u64 *)pci_alloc_consistent(
+ h->pdev, h->max_commands * sizeof(__u64),
+ &(h->reply_pool_dhandle));
+
+ /* Need a block fetch table for performant mode */
+ h->blockFetchTable = kmalloc(((h->maxsgentries+1) *
+ sizeof(__u32)), GFP_KERNEL);
+
+ if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL))
+ goto clean_up;
+
+ h->reply_pool_wraparound = 1; /* spec: init to 1 */
+
+ /* Controller spec: zero out this buffer. */
+ memset(h->reply_pool, 0, h->max_commands * sizeof(__u64));
+ h->reply_pool_head = h->reply_pool;
+
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ calc_bucket_map(bft, ARRAY_SIZE(bft), h->maxsgentries,
+ h->blockFetchTable);
+ writel(bft[0], &h->transtable->BlockFetch0);
+ writel(bft[1], &h->transtable->BlockFetch1);
+ writel(bft[2], &h->transtable->BlockFetch2);
+ writel(bft[3], &h->transtable->BlockFetch3);
+ writel(bft[4], &h->transtable->BlockFetch4);
+ writel(bft[5], &h->transtable->BlockFetch5);
+ writel(bft[6], &h->transtable->BlockFetch6);
+ writel(bft[7], &h->transtable->BlockFetch7);
+
+ /* size of controller ring buffer */
+ writel(h->max_commands, &h->transtable->RepQSize);
+ writel(1, &h->transtable->RepQCount);
+ writel(0, &h->transtable->RepQCtrAddrLow32);
+ writel(0, &h->transtable->RepQCtrAddrHigh32);
+ writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
+ writel(0, &h->transtable->RepQAddr0High32);
+ writel(CFGTBL_Trans_Performant,
+ &(h->cfgtable->HostWrite.TransportRequest));
+
+ h->transMethod = CFGTBL_Trans_Performant;
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+ /* under certain very rare conditions, this can take awhile.
+ * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
+ * as we enter this code.) */
+ for (l = 0; l < MAX_CONFIG_WAIT; l++) {
+ register_value = readl(h->vaddr + SA5_DOORBELL);
+ if (!(register_value & CFGTBL_ChangeReq))
+ break;
+ /* delay and try again */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(10);
+ }
+ register_value = readl(&(h->cfgtable->TransportActive));
+ if (!(register_value & CFGTBL_Trans_Performant)) {
+ printk(KERN_WARNING "cciss: unable to get board into"
+ " performant mode\n");
+ return;
+ }
+
+ /* Change the access methods to the performant access methods */
+ h->access = SA5_performant_access;
+
+ return;
+clean_up:
+ kfree(h->blockFetchTable);
+ if (h->reply_pool)
+ pci_free_consistent(h->pdev,
+ h->max_commands * sizeof(__u64),
+ h->reply_pool,
+ h->reply_pool_dhandle);
+ return;
+
+} /* cciss_put_controller_into_performant_mode */
+
/* If MSI/MSI-X is supported by the kernel we will try to enable it on
* controllers that are capable. If not, we use IO-APIC mode.
*/
@@ -3749,7 +3939,7 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
- c->intr[SIMPLE_MODE_INT] = pdev->irq;
+ c->intr[PERF_MODE_INT] = pdev->irq;
return;
}
@@ -3761,6 +3951,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
__u32 cfg_base_addr;
__u64 cfg_base_addr_index;
int i, prod_index, err;
+ __u32 trans_offset;
subsystem_vendor_id = pdev->subsystem_vendor;
subsystem_device_id = pdev->subsystem_device;
@@ -3874,11 +4065,16 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) +
cfg_offset, sizeof(CfgTable_struct));
+ /* Find performant mode table. */
+ trans_offset = readl(&(c->cfgtable->TransMethodOffset));
+ c->transtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index) + cfg_offset+trans_offset,
+ sizeof(*c->transtable));
c->board_id = board_id;
-#ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
-#endif /* CCISS_DEBUG */
+ #ifdef CCISS_DEBUG
+ print_cfg_table(c->cfgtable);
+ #endif /* CCISS_DEBUG */
/* Some controllers support Zero Memory Raid (ZMR).
* When configured in ZMR mode the number of supported
@@ -3888,7 +4084,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* are supported on the controller then subtract 4 to
* leave a little room for ioctl calls.
*/
- c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
+ c->max_commands = readl(&(c->cfgtable->MaxPerformantModeCommands));
c->maxsgentries = readl(&(c->cfgtable->MaxSGElements));
/*
@@ -3933,7 +4129,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* kernels revealed a bug in the refetch if dom0 resides on a P600.
*/
if(board_id == 0x3225103C) {
- __u32 dma_prefetch;
+ __u32 dma_prefetch;
__u32 dma_refetch;
dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
dma_prefetch |= 0x8000;
@@ -3944,38 +4140,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
}
#ifdef CCISS_DEBUG
- printk("Trying to put board into Simple mode\n");
+ printk(KERN_WARNING "Trying to put board into Performant mode\n");
#endif /* CCISS_DEBUG */
- c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
- /* Update the field, and then ring the doorbell */
- writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest));
- writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL);
-
- /* under certain very rare conditions, this can take awhile.
- * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
- * as we enter this code.) */
- for (i = 0; i < MAX_CONFIG_WAIT; i++) {
- if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
- break;
- /* delay and try again */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(1));
- }
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "I counter got to %d %x\n", i,
- readl(c->vaddr + SA5_DOORBELL));
-#endif /* CCISS_DEBUG */
-#ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
-#endif /* CCISS_DEBUG */
-
- if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
- printk(KERN_WARNING "cciss: unable to get board into"
- " simple mode\n");
- err = -ENODEV;
- goto err_out_free_res;
- }
return 0;
err_out_free_res:
@@ -3984,6 +4150,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* Smart Array controllers that pci_enable_device does not undo
*/
pci_release_regions(pdev);
+ cciss_put_controller_into_performant_mode(c);
return err;
}
@@ -4260,7 +4427,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
i = alloc_cciss_hba();
if (i < 0)
return -1;
-
hba[i]->busy_initializing = 1;
INIT_HLIST_HEAD(&hba[i]->cmpQ);
INIT_HLIST_HEAD(&hba[i]->reqQ);
@@ -4327,7 +4493,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
hba[i]->devname, pdev->device, pci_name(pdev),
- hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
+ hba[i]->intr[PERF_MODE_INT], dac ? "" : " not");
hba[i]->cmd_pool_bits =
kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
@@ -4433,7 +4599,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
- free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
+ free_irq(hba[i]->intr[PERF_MODE_INT], hba[i]);
clean2:
unregister_blkdev(hba[i]->major, hba[i]->devname);
clean1:
@@ -4475,7 +4641,7 @@ static void cciss_shutdown(struct pci_dev *pdev)
printk(KERN_WARNING "cciss%d: Error flushing cache\n",
h->ctlr);
h->access.set_intr_mask(h, CCISS_INTR_OFF);
- free_irq(h->intr[2], h);
+ free_irq(h->intr[PERF_MODE_INT], h);
}
static void __devexit cciss_remove_one(struct pci_dev *pdev)
@@ -4575,7 +4741,6 @@ static int __init cciss_init(void)
* array of them, the size must be a multiple of 8 bytes.
*/
BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT);
-
printk(KERN_INFO DRIVER_NAME "\n");
err = bus_register(&cciss_bus_type);
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index c527932d223a5..8a9f5b58daa88 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -85,8 +85,8 @@ struct ctlr_info
int max_cmd_sgentries;
SGDescriptor_struct **cmd_sg_list;
-# define DOORBELL_INT 0
-# define PERF_MODE_INT 1
+# define PERF_MODE_INT 0
+# define DOORBELL_INT 1
# define SIMPLE_MODE_INT 2
# define MEMQ_MODE_INT 3
unsigned int intr[4];
@@ -137,10 +137,27 @@ struct ctlr_info
struct list_head scan_list;
struct completion scan_wait;
struct device dev;
+ /*
+ * Performant mode tables.
+ */
+ u32 trans_support;
+ u32 trans_offset;
+ struct TransTable_struct *transtable;
+ unsigned long transMethod;
+
+ /*
+ * Performant mode completion buffer
+ */
+ u64 *reply_pool;
+ dma_addr_t reply_pool_dhandle;
+ u64 *reply_pool_head;
+ size_t reply_pool_size;
+ unsigned char reply_pool_wraparound;
+ u32 *blockFetchTable;
};
-/* Defining the diffent access_menthods */
-/*
+/* Defining the diffent access_methods
+ *
* Memory mapped FIFO interface (SMART 53xx cards)
*/
#define SA5_DOORBELL 0x20
@@ -159,6 +176,15 @@ struct ctlr_info
#define SA5B_INTR_PENDING 0x04
#define FIFO_EMPTY 0xffffffff
#define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
+/* Perf. mode flags */
+#define SA5_PERF_INTR_PENDING 0x04
+#define SA5_PERF_INTR_OFF 0x05
+#define SA5_OUTDB_STATUS_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR 0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_STATUS 0x9C
+
#define CISS_ERROR_BIT 0x02
@@ -170,8 +196,9 @@ struct ctlr_info
static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
{
#ifdef CCISS_DEBUG
- printk("Sending %x - down to controller\n", c->busaddr );
-#endif /* CCISS_DEBUG */
+ printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
+ h->ctlr, c->busaddr);
+#endif /* CCISS_DEBUG */
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
h->commands_outstanding++;
if ( h->commands_outstanding > h->max_outstanding)
@@ -214,6 +241,20 @@ static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
+
+/* Performant mode intr_mask */
+static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ if (val) { /* turn on interrupts */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else {
+ h->interrupts_enabled = 0;
+ writel(SA5_PERF_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
/*
* Returns true if fifo is full.
*
@@ -250,6 +291,40 @@ static unsigned long SA5_completed(ctlr_info_t *h)
return ( register_value);
}
+
+/* Performant mode command completed */
+static unsigned long SA5_performant_completed(ctlr_info_t *h)
+{
+ unsigned long register_value = FIFO_EMPTY;
+
+ /* flush the controller write of the reply queue by reading
+ * outbound doorbell status register.
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ /* msi auto clears the interrupt pending bit. */
+ if (!(h->msi_vector || h->msix_vector)) {
+ writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+ /* Do a read in order to flush the write to the controller
+ * (as per spec.)
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ }
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ register_value = *(h->reply_pool_head);
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ register_value = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+
+ return register_value;
+}
/*
* Returns true if an interrupt is pending..
*/
@@ -280,6 +355,20 @@ static bool SA5B_intr_pending(ctlr_info_t *h)
return 0 ;
}
+static bool SA5_performant_intr_pending(ctlr_info_t *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ if (!register_value)
+ return false;
+
+ if (h->msi_vector || h->msix_vector)
+ return true;
+
+ /* Read outbound doorbell to flush */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
static struct access_method SA5_access = {
SA5_submit_command,
@@ -297,6 +386,14 @@ static struct access_method SA5B_access = {
SA5_completed,
};
+static struct access_method SA5_performant_access = {
+ SA5_submit_command,
+ SA5_performant_intr_mask,
+ SA5_fifo_full,
+ SA5_performant_intr_pending,
+ SA5_performant_completed,
+};
+
struct board_type {
__u32 board_id;
char *product_name;
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index e624ff959cb68..eda6a8e6b600c 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -54,6 +54,7 @@
#define CFGTBL_AccCmds 0x00000001l
#define CFGTBL_Trans_Simple 0x00000002l
+#define CFGTBL_Trans_Performant 0x00000004l
#define CFGTBL_BusType_Ultra2 0x00000001l
#define CFGTBL_BusType_Ultra3 0x00000002l
@@ -173,12 +174,15 @@ typedef struct _SGDescriptor_struct {
* PAD_64 can be adjusted independently as needed for 32-bit
* and 64-bits systems.
*/
-#define COMMANDLIST_ALIGNMENT (8)
+#define COMMANDLIST_ALIGNMENT (32)
#define IS_64_BIT ((sizeof(long) - 4)/4)
#define IS_32_BIT (!IS_64_BIT)
-#define PAD_32 (0)
+#define PAD_32 (32)
#define PAD_64 (4)
#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
+#define DIRECT_LOOKUP_BIT 0x10
+#define DIRECT_LOOKUP_SHIFT 5
+
typedef struct _CommandList_struct {
CommandListHeader_struct Header;
RequestBlock_struct Request;
@@ -195,7 +199,7 @@ typedef struct _CommandList_struct {
struct completion *waiting;
int retry_count;
void * scsi_cmd;
- char pad[PADSIZE];
+ char pad[PADSIZE];
} CommandList_struct;
/* Configuration Table Structure */
@@ -209,12 +213,15 @@ typedef struct _HostWrite_struct {
typedef struct _CfgTable_struct {
BYTE Signature[4];
DWORD SpecValence;
+#define SIMPLE_MODE 0x02
+#define PERFORMANT_MODE 0x04
+#define MEMQ_MODE 0x08
DWORD TransportSupport;
DWORD TransportActive;
HostWrite_struct HostWrite;
DWORD CmdsOutMax;
DWORD BusTypes;
- DWORD Reserved;
+ DWORD TransMethodOffset;
BYTE ServerName[16];
DWORD HeartBeat;
DWORD SCSI_Prefetch;
@@ -222,6 +229,25 @@ typedef struct _CfgTable_struct {
DWORD MaxLogicalUnits;
DWORD MaxPhysicalDrives;
DWORD MaxPhysicalDrivesPerLogicalUnit;
+ DWORD MaxPerformantModeCommands;
} CfgTable_struct;
+
+struct TransTable_struct {
+ u32 BlockFetch0;
+ u32 BlockFetch1;
+ u32 BlockFetch2;
+ u32 BlockFetch3;
+ u32 BlockFetch4;
+ u32 BlockFetch5;
+ u32 BlockFetch6;
+ u32 BlockFetch7;
+ u32 RepQSize;
+ u32 RepQCount;
+ u32 RepQCtrAddrLow32;
+ u32 RepQCtrAddrHigh32;
+ u32 RepQAddr0Low32;
+ u32 RepQAddr0High32;
+};
+
#pragma pack()
#endif /* CCISS_CMD_H */
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 72dae92f3cab8..48be478537373 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -93,8 +93,8 @@ static struct scsi_host_template cciss_driver_template = {
#pragma pack(1)
-#define SCSI_PAD_32 0
-#define SCSI_PAD_64 0
+#define SCSI_PAD_32 8
+#define SCSI_PAD_64 8
struct cciss_scsi_cmd_stack_elem_t {
CommandList_struct cmd;
@@ -213,6 +213,8 @@ scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa)
/* Check alignment, see cciss_cmd.h near CommandList_struct def. */
BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
+ /* printk(KERN_WARNING "cciss_scsi.c: 0x%08x 0x%08x 0x%08x\n",
+ 0xdeadbeef, sizeof(*stk->pool), 0xbeefdead); */
/* pci_alloc_consistent guarantees 32-bit DMA address will be used */
stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle);
--
GitLab
From 841fdffdd382722d33579a6aa1487e8a4e526dbd Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Wed, 2 Jun 2010 12:58:09 -0700
Subject: [PATCH 265/863] cciss: new controller support and bump driver version
Add support for new controllers due out next year. HP must continue to
support new controllers in older distros. All vendors require support be
upstream. These controllers support only 16 commands in simple mode but
can support up to 1024 in performant mode. See patch 5/6/ We have no
marketing names yet.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 08a2e619dc36e..5e215ff0a6bb0 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -56,16 +56,14 @@
#include <linux/kthread.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.26)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 26)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
-MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
- " Smart Array G2 Series SAS/SATA Controllers");
-MODULE_VERSION("3.6.20");
+MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
+MODULE_VERSION("3.6.26");
MODULE_LICENSE("GPL");
static int cciss_allow_hpsa;
@@ -107,6 +105,11 @@ static const struct pci_device_id cciss_pci_device_id[] = {
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3250},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3251},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3252},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3253},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3254},
{0,}
};
@@ -146,6 +149,11 @@ static struct board_type products[] = {
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324A103C, "Smart Array P712m", &SA5_access},
{0x324B103C, "Smart Array P711m", &SA5_access},
+ {0x3250103C, "Smart Array", &SA5_access},
+ {0x3251103C, "Smart Array", &SA5_access},
+ {0x3252103C, "Smart Array", &SA5_access},
+ {0x3253103C, "Smart Array", &SA5_access},
+ {0x3254103C, "Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
--
GitLab
From e2e1a148bc45855816ae6b4692ce29d0020fa22e Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Wed, 9 Jun 2010 10:42:09 +0200
Subject: [PATCH 266/863] block: add sysfs knob for turning off disk entropy
contributions
There are two reasons for doing this:
- On SSD disks, the completion times aren't as random as they
are for rotational drives. So it's questionable whether they
should contribute to the random pool in the first place.
- Calling add_disk_randomness() has a lot of overhead.
This adds /sys/block/<dev>/queue/add_random that will allow you to
switch off on a per-device basis. The default setting is on, so there
should be no functional changes from this patch.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-core.c | 3 ++-
block/blk-sysfs.c | 28 ++++++++++++++++++++++++++++
include/linux/blkdev.h | 5 ++++-
3 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index f0640d7f800f7..b4131d29148ce 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2111,7 +2111,8 @@ static bool blk_update_bidi_request(struct request *rq, int error,
blk_update_request(rq->next_rq, error, bidi_bytes))
return true;
- add_disk_randomness(rq->rq_disk);
+ if (blk_queue_add_random(rq->q))
+ add_disk_randomness(rq->rq_disk);
return false;
}
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 306759bbdf1be..58b53c354c2c0 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -250,6 +250,27 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count)
return ret;
}
+static ssize_t queue_random_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(blk_queue_add_random(q), page);
+}
+
+static ssize_t queue_random_store(struct request_queue *q, const char *page,
+ size_t count)
+{
+ unsigned long val;
+ ssize_t ret = queue_var_store(&val, page, count);
+
+ spin_lock_irq(q->queue_lock);
+ if (val)
+ queue_flag_set(QUEUE_FLAG_ADD_RANDOM, q);
+ else
+ queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
+ spin_unlock_irq(q->queue_lock);
+
+ return ret;
+}
+
static ssize_t queue_iostats_show(struct request_queue *q, char *page)
{
return queue_var_show(blk_queue_io_stat(q), page);
@@ -374,6 +395,12 @@ static struct queue_sysfs_entry queue_iostats_entry = {
.store = queue_iostats_store,
};
+static struct queue_sysfs_entry queue_random_entry = {
+ .attr = {.name = "add_random", .mode = S_IRUGO | S_IWUSR },
+ .show = queue_random_show,
+ .store = queue_random_store,
+};
+
static struct attribute *default_attrs[] = {
&queue_requests_entry.attr,
&queue_ra_entry.attr,
@@ -394,6 +421,7 @@ static struct attribute *default_attrs[] = {
&queue_nomerges_entry.attr,
&queue_rq_affinity_entry.attr,
&queue_iostats_entry.attr,
+ &queue_random_entry.attr,
NULL,
};
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 09a840264d6fd..b8224ea4a5def 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -467,11 +467,13 @@ struct request_queue
#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */
#define QUEUE_FLAG_DISCARD 16 /* supports DISCARD */
#define QUEUE_FLAG_NOXMERGES 17 /* No extended merges */
+#define QUEUE_FLAG_ADD_RANDOM 18 /* Contributes to random pool */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_CLUSTER) | \
(1 << QUEUE_FLAG_STACKABLE) | \
- (1 << QUEUE_FLAG_SAME_COMP))
+ (1 << QUEUE_FLAG_SAME_COMP) | \
+ (1 << QUEUE_FLAG_ADD_RANDOM))
static inline int queue_is_locked(struct request_queue *q)
{
@@ -596,6 +598,7 @@ enum {
test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
#define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
+#define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
#define blk_queue_flushing(q) ((q)->ordseq)
#define blk_queue_stackable(q) \
test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
--
GitLab
From 956bcb7c1a9a73c6d5db66e83f32c785d06dc8fc Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Sat, 7 Aug 2010 18:13:50 +0200
Subject: [PATCH 267/863] block: add helpers for the trivial queue flag sysfs
show/store entries
The code for nonrot, random, and io stats are completely identical.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-sysfs.c | 104 ++++++++++++++++------------------------------
1 file changed, 36 insertions(+), 68 deletions(-)
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 58b53c354c2c0..001ab18078f5b 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -180,26 +180,36 @@ static ssize_t queue_max_hw_sectors_show(struct request_queue *q, char *page)
return queue_var_show(max_hw_sectors_kb, (page));
}
-static ssize_t queue_nonrot_show(struct request_queue *q, char *page)
-{
- return queue_var_show(!blk_queue_nonrot(q), page);
-}
-
-static ssize_t queue_nonrot_store(struct request_queue *q, const char *page,
- size_t count)
-{
- unsigned long nm;
- ssize_t ret = queue_var_store(&nm, page, count);
-
- spin_lock_irq(q->queue_lock);
- if (nm)
- queue_flag_clear(QUEUE_FLAG_NONROT, q);
- else
- queue_flag_set(QUEUE_FLAG_NONROT, q);
- spin_unlock_irq(q->queue_lock);
-
- return ret;
-}
+#define QUEUE_SYSFS_BIT_FNS(name, flag, neg) \
+static ssize_t \
+queue_show_##name(struct request_queue *q, char *page) \
+{ \
+ int bit; \
+ bit = test_bit(QUEUE_FLAG_##flag, &q->queue_flags); \
+ return queue_var_show(neg ? !bit : bit, page); \
+} \
+static ssize_t \
+queue_store_##name(struct request_queue *q, const char *page, size_t count) \
+{ \
+ unsigned long val; \
+ ssize_t ret; \
+ ret = queue_var_store(&val, page, count); \
+ if (neg) \
+ val = !val; \
+ \
+ spin_lock_irq(q->queue_lock); \
+ if (val) \
+ queue_flag_set(QUEUE_FLAG_##flag, q); \
+ else \
+ queue_flag_clear(QUEUE_FLAG_##flag, q); \
+ spin_unlock_irq(q->queue_lock); \
+ return ret; \
+}
+
+QUEUE_SYSFS_BIT_FNS(nonrot, NONROT, 1);
+QUEUE_SYSFS_BIT_FNS(random, ADD_RANDOM, 0);
+QUEUE_SYSFS_BIT_FNS(iostats, IO_STAT, 0);
+#undef QUEUE_SYSFS_BIT_FNS
static ssize_t queue_nomerges_show(struct request_queue *q, char *page)
{
@@ -250,48 +260,6 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count)
return ret;
}
-static ssize_t queue_random_show(struct request_queue *q, char *page)
-{
- return queue_var_show(blk_queue_add_random(q), page);
-}
-
-static ssize_t queue_random_store(struct request_queue *q, const char *page,
- size_t count)
-{
- unsigned long val;
- ssize_t ret = queue_var_store(&val, page, count);
-
- spin_lock_irq(q->queue_lock);
- if (val)
- queue_flag_set(QUEUE_FLAG_ADD_RANDOM, q);
- else
- queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
- spin_unlock_irq(q->queue_lock);
-
- return ret;
-}
-
-static ssize_t queue_iostats_show(struct request_queue *q, char *page)
-{
- return queue_var_show(blk_queue_io_stat(q), page);
-}
-
-static ssize_t queue_iostats_store(struct request_queue *q, const char *page,
- size_t count)
-{
- unsigned long stats;
- ssize_t ret = queue_var_store(&stats, page, count);
-
- spin_lock_irq(q->queue_lock);
- if (stats)
- queue_flag_set(QUEUE_FLAG_IO_STAT, q);
- else
- queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
- spin_unlock_irq(q->queue_lock);
-
- return ret;
-}
-
static struct queue_sysfs_entry queue_requests_entry = {
.attr = {.name = "nr_requests", .mode = S_IRUGO | S_IWUSR },
.show = queue_requests_show,
@@ -373,8 +341,8 @@ static struct queue_sysfs_entry queue_discard_zeroes_data_entry = {
static struct queue_sysfs_entry queue_nonrot_entry = {
.attr = {.name = "rotational", .mode = S_IRUGO | S_IWUSR },
- .show = queue_nonrot_show,
- .store = queue_nonrot_store,
+ .show = queue_show_nonrot,
+ .store = queue_store_nonrot,
};
static struct queue_sysfs_entry queue_nomerges_entry = {
@@ -391,14 +359,14 @@ static struct queue_sysfs_entry queue_rq_affinity_entry = {
static struct queue_sysfs_entry queue_iostats_entry = {
.attr = {.name = "iostats", .mode = S_IRUGO | S_IWUSR },
- .show = queue_iostats_show,
- .store = queue_iostats_store,
+ .show = queue_show_iostats,
+ .store = queue_store_iostats,
};
static struct queue_sysfs_entry queue_random_entry = {
.attr = {.name = "add_random", .mode = S_IRUGO | S_IWUSR },
- .show = queue_random_show,
- .store = queue_random_store,
+ .show = queue_show_random,
+ .store = queue_store_random,
};
static struct attribute *default_attrs[] = {
--
GitLab
From 256aea3fd3b5c43e8d05ce66eaf43def83773612 Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Fri, 11 Jun 2010 13:13:14 +0200
Subject: [PATCH 268/863] cciss: make sure we request the performant mode irq
Make sure we register the performant mode interrupt Another blunder.
Seemed to work because the call to put_controller_into_performant_mode was
never called.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 5e215ff0a6bb0..4f59f03f91ff4 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4483,18 +4483,18 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
/* make sure the board interrupts are off */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
if (hba[i]->msi_vector || hba[i]->msix_vector) {
- if (request_irq(hba[i]->intr[SIMPLE_MODE_INT],
+ if (request_irq(hba[i]->intr[PERF_MODE_INT],
do_cciss_msix_intr,
IRQF_DISABLED, hba[i]->devname, hba[i])) {
printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
- hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
+ hba[i]->intr[PERF_MODE_INT], hba[i]->devname);
goto clean2;
}
} else {
- if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intx,
+ if (request_irq(hba[i]->intr[PERF_MODE_INT], do_cciss_intx,
IRQF_DISABLED, hba[i]->devname, hba[i])) {
printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
- hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
+ hba[i]->intr[PERF_MODE_INT], hba[i]->devname);
goto clean2;
}
}
--
GitLab
From b14aa6dcd083ad00fb416a93f76131734e6c3c17 Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Fri, 11 Jun 2010 13:13:35 +0200
Subject: [PATCH 269/863] cciss: fix call to put_controller_in_performant_mode
call to put_controller_in_performant_mode was in the wrong place
The call inadvertently ended up in an error path.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 4f59f03f91ff4..156ea365c14d5 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4150,6 +4150,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
#ifdef CCISS_DEBUG
printk(KERN_WARNING "Trying to put board into Performant mode\n");
#endif /* CCISS_DEBUG */
+ cciss_put_controller_into_performant_mode(c);
return 0;
err_out_free_res:
@@ -4158,7 +4159,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* Smart Array controllers that pci_enable_device does not undo
*/
pci_release_regions(pdev);
- cciss_put_controller_into_performant_mode(c);
return err;
}
--
GitLab
From 29979a71227c46b2ed970b9d603d529c718e5fc8 Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Fri, 11 Jun 2010 13:13:35 +0200
Subject: [PATCH 270/863] cciss: move next_command function from ifdef
The definition of next_command also ended up in wrong place It ended up
inside an "#ifdef CONFIG_PROCFS". Already caught by Randy Dunlap and a
couple others. Tried to put it somewhere that made sense.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 45 ++++++++++++++++++++++---------------------
1 file changed, 23 insertions(+), 22 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 156ea365c14d5..10a0268a1f92c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -213,6 +213,7 @@ static void cciss_hba_release(struct device *dev);
static void cciss_device_release(struct device *dev);
static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
+static inline u32 next_command(ctlr_info_t *h);
/* performant mode helper functions */
static void calc_bucket_map(int *bucket, int num_buckets, int nsgs,
@@ -374,28 +375,6 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
#ifdef CONFIG_PROC_FS
-static inline u32 next_command(ctlr_info_t *h)
-{
- u32 a;
-
- if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
- return h->access.command_completed(h);
-
- if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
- a = *(h->reply_pool_head); /* Next cmd in ring buffer */
- (h->reply_pool_head)++;
- h->commands_outstanding--;
- } else {
- a = FIFO_EMPTY;
- }
- /* Check for wraparound */
- if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
- h->reply_pool_head = h->reply_pool;
- h->reply_pool_wraparound ^= 1;
- }
- return a;
-}
-
/*
* Report information about this controller.
*/
@@ -3411,6 +3390,28 @@ static inline void finish_cmd(ctlr_info_t *h, CommandList_struct *c,
#endif
}
+static inline u32 next_command(ctlr_info_t *h)
+{
+ u32 a;
+
+ if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
+ return h->access.command_completed(h);
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ a = *(h->reply_pool_head); /* Next cmd in ring buffer */
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ a = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+ return a;
+}
+
/* process completion of an indexed ("direct lookup") command */
static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag)
{
--
GitLab
From b0dd5cad3a3297415f8205135d37f22da12b9083 Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Fri, 11 Jun 2010 13:13:36 +0200
Subject: [PATCH 271/863] cciss: remove errant debug code
Remove a debug statement left behind by accident Ths debug statement got
left behind. It was commented out after use but not deleted.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss_scsi.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 48be478537373..8e0a709286df6 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -213,8 +213,6 @@ scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa)
/* Check alignment, see cciss_cmd.h near CommandList_struct def. */
BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
- /* printk(KERN_WARNING "cciss_scsi.c: 0x%08x 0x%08x 0x%08x\n",
- 0xdeadbeef, sizeof(*stk->pool), 0xbeefdead); */
/* pci_alloc_consistent guarantees 32-bit DMA address will be used */
stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle);
--
GitLab
From f3bcb14332a5881c88f8cd16ed59f3fd0ae26e12 Mon Sep 17 00:00:00 2001
From: Mike Miller <mike.miller@hp.com>
Date: Fri, 11 Jun 2010 13:13:36 +0200
Subject: [PATCH 272/863] cciss: change pad value from 32 to 0
Change the command padding on 32-bit systems to 0 since setting it to 32
has the identical effect.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss_cmd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index eda6a8e6b600c..936b9666da6a6 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -177,7 +177,7 @@ typedef struct _SGDescriptor_struct {
#define COMMANDLIST_ALIGNMENT (32)
#define IS_64_BIT ((sizeof(long) - 4)/4)
#define IS_32_BIT (!IS_64_BIT)
-#define PAD_32 (32)
+#define PAD_32 (0)
#define PAD_64 (4)
#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
#define DIRECT_LOOKUP_BIT 0x10
--
GitLab
From 285203c8ff541a775f27148c06c58b96822d8b68 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 13:21:11 +0200
Subject: [PATCH 273/863] floppy: initialize debug jiffies offset
Set debug jiffies offset at initialization. Avoids wierd values showing
up if debugging enabled.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 90c4038702da3..0cb24f00c9204 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4175,6 +4175,9 @@ static int __init floppy_init(void)
int i, unit, drive;
int err, dr;
+ set_debugt();
+ interruptjiffies = resultjiffies = jiffies;
+
#if defined(CONFIG_PPC)
if (check_legacy_ioport(FDC1))
return -ENODEV;
--
GitLab
From be7a12bb1a7dc185d5143e3ae434f8a855f66a31 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 13:21:11 +0200
Subject: [PATCH 274/863] floppy: remove unnecessary inlines
These routines are all big enough that is better to let the compiler
decide to inline or not.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 0cb24f00c9204..7ba239e8f0dc7 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -899,7 +899,7 @@ static int _lock_fdc(int drive, bool interruptible, int line)
_lock_fdc(drive, interruptible, __LINE__)
/* unlocks the driver */
-static inline void unlock_fdc(void)
+static void unlock_fdc(void)
{
unsigned long flags;
@@ -1224,7 +1224,7 @@ static int need_more_output(void)
/* Set perpendicular mode as required, based on data rate, if supported.
* 82077 Now tested. 1Mbps data rate only possible with 82077-1.
*/
-static inline void perpendicular_mode(void)
+static void perpendicular_mode(void)
{
unsigned char perp_mode;
@@ -3033,7 +3033,7 @@ static inline int fd_copyin(void __user *param, void *address,
return copy_from_user(address, param, size) ? -EFAULT : 0;
}
-static inline const char *drive_name(int type, int drive)
+static const char *drive_name(int type, int drive)
{
struct floppy_struct *floppy;
@@ -3103,7 +3103,7 @@ static struct cont_t raw_cmd_cont = {
.done = raw_cmd_done
};
-static inline int raw_cmd_copyout(int cmd, void __user *param,
+static int raw_cmd_copyout(int cmd, void __user *param,
struct floppy_raw_cmd *ptr)
{
int ret;
@@ -3148,7 +3148,7 @@ static void raw_cmd_free(struct floppy_raw_cmd **ptr)
}
}
-static inline int raw_cmd_copyin(int cmd, void __user *param,
+static int raw_cmd_copyin(int cmd, void __user *param,
struct floppy_raw_cmd **rcmd)
{
struct floppy_raw_cmd *ptr;
@@ -3266,7 +3266,7 @@ static int invalidate_drive(struct block_device *bdev)
return 0;
}
-static inline int set_geometry(unsigned int cmd, struct floppy_struct *g,
+static int set_geometry(unsigned int cmd, struct floppy_struct *g,
int drive, int type, struct block_device *bdev)
{
int cnt;
@@ -3365,7 +3365,7 @@ static int ioctl_table[] = {
FDTWADDLE
};
-static inline int normalize_ioctl(int *cmd, int *size)
+static int normalize_ioctl(int *cmd, int *size)
{
int i;
--
GitLab
From 41a55b4de396f675485a3f3cb3e1b117316e9ce9 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 13:21:11 +0200
Subject: [PATCH 275/863] floppy: silence warning during disk test
The first thing the floppy does is read block 0 to test geometry and to
test for disk presence. If disk is not present this causes a console
warning message about failed I/O. Set flag to silence.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 7ba239e8f0dc7..5816387f9bce6 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3829,6 +3829,7 @@ static int __floppy_read_block_0(struct block_device *bdev)
bio.bi_size = size;
bio.bi_bdev = bdev;
bio.bi_sector = 0;
+ bio.bi_flags = BIO_QUIET;
init_completion(&complete);
bio.bi_private = &complete;
bio.bi_end_io = floppy_rb0_complete;
--
GitLab
From 575cfc673e0f2e6f71ccc01bb77d7ec811054048 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 13:21:11 +0200
Subject: [PATCH 276/863] floppy: use atomic type for usage_count
The usage_count was being protected by a lock which was only there to
create an atomic counter.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 42 ++++++++++++------------------------------
1 file changed, 12 insertions(+), 30 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 5816387f9bce6..9b4746871227d 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -578,7 +578,7 @@ static void reset_fdc(void);
#define NEED_1_RECAL -2
#define NEED_2_RECAL -3
-static int usage_count;
+static atomic_t usage_count = ATOMIC_INIT(0);
/* buffer related variables */
static int buffer_track = -1;
@@ -860,7 +860,7 @@ static void set_fdc(int drive)
/* locks the driver */
static int _lock_fdc(int drive, bool interruptible, int line)
{
- if (!usage_count) {
+ if (atomic_read(&usage_count) == 0) {
pr_err("Trying to lock fdc while usage count=0 at line %d\n",
line);
return -1;
@@ -2941,7 +2941,7 @@ static void do_fd_request(struct request_queue *q)
return;
}
- if (usage_count == 0) {
+ if (atomic_read(&usage_count) == 0) {
pr_info("warning: usage count=0, current_req=%p exiting\n",
current_req);
pr_info("sect=%ld type=%x flags=%x\n",
@@ -3858,7 +3858,7 @@ static int floppy_revalidate(struct gendisk *disk)
if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
test_bit(drive, &fake_change) || NO_GEOM) {
- if (usage_count == 0) {
+ if (atomic_read(&usage_count) == 0) {
pr_info("VFS: revalidate called on non-open device.\n");
return -EFAULT;
}
@@ -4357,7 +4357,7 @@ static int __init floppy_init(void)
platform_device_unregister(&floppy_device[drive]);
out_flush_work:
flush_scheduled_work();
- if (usage_count)
+ if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
out_unreg_region:
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
@@ -4374,8 +4374,6 @@ static int __init floppy_init(void)
return err;
}
-static DEFINE_SPINLOCK(floppy_usage_lock);
-
static const struct io_region {
int offset;
int size;
@@ -4421,14 +4419,8 @@ static void floppy_release_regions(int fdc)
static int floppy_grab_irq_and_dma(void)
{
- unsigned long flags;
-
- spin_lock_irqsave(&floppy_usage_lock, flags);
- if (usage_count++) {
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ if (atomic_inc_return(&usage_count) > 1)
return 0;
- }
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
/*
* We might have scheduled a free_irq(), wait it to
@@ -4439,9 +4431,7 @@ static int floppy_grab_irq_and_dma(void)
if (fd_request_irq()) {
DPRINT("Unable to grab IRQ%d for the floppy driver\n",
FLOPPY_IRQ);
- spin_lock_irqsave(&floppy_usage_lock, flags);
- usage_count--;
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ atomic_dec(&usage_count);
return -1;
}
if (fd_request_dma()) {
@@ -4451,9 +4441,7 @@ static int floppy_grab_irq_and_dma(void)
use_virtual_dma = can_use_virtual_dma = 1;
if (!(can_use_virtual_dma & 1)) {
fd_free_irq();
- spin_lock_irqsave(&floppy_usage_lock, flags);
- usage_count--;
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ atomic_dec(&usage_count);
return -1;
}
}
@@ -4488,9 +4476,7 @@ static int floppy_grab_irq_and_dma(void)
fd_free_dma();
while (--fdc >= 0)
floppy_release_regions(fdc);
- spin_lock_irqsave(&floppy_usage_lock, flags);
- usage_count--;
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ atomic_dec(&usage_count);
return -1;
}
@@ -4502,14 +4488,10 @@ static void floppy_release_irq_and_dma(void)
#endif
long tmpsize;
unsigned long tmpaddr;
- unsigned long flags;
- spin_lock_irqsave(&floppy_usage_lock, flags);
- if (--usage_count) {
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ if (!atomic_dec_and_test(&usage_count))
return;
- }
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
+
if (irqdma_allocated) {
fd_disable_dma();
fd_free_dma();
@@ -4602,7 +4584,7 @@ static void __exit floppy_module_exit(void)
del_timer_sync(&fd_timer);
blk_cleanup_queue(floppy_queue);
- if (usage_count)
+ if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
/* eject disk, if any */
--
GitLab
From be1c0fbfb4e84d0b02903cbc6358124586605a1b Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 13:21:11 +0200
Subject: [PATCH 277/863] floppy: cmos attribute should be static
As reported by sparse, cmos attribute is local.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 9b4746871227d..975fac3669c50 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4127,7 +4127,7 @@ static ssize_t floppy_cmos_show(struct device *dev,
return sprintf(buf, "%X\n", UDP->cmos);
}
-DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
+static DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
static void floppy_device_release(struct device *dev)
{
--
GitLab
From 21af5448042a0962fb1df13a310bb363a8f6a8dc Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 13:21:11 +0200
Subject: [PATCH 278/863] floppy: fix signed/unsigned warnings
Ioctl cmd value is unsigned, so change normalize_ioctl
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 975fac3669c50..fd7085aa999fc 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3337,7 +3337,7 @@ static int set_geometry(unsigned int cmd, struct floppy_struct *g,
}
/* handle obsolete ioctl's */
-static int ioctl_table[] = {
+static unsigned int ioctl_table[] = {
FDCLRPRM,
FDSETPRM,
FDDEFPRM,
@@ -3365,7 +3365,7 @@ static int ioctl_table[] = {
FDTWADDLE
};
-static int normalize_ioctl(int *cmd, int *size)
+static int normalize_ioctl(unsigned int *cmd, int *size)
{
int i;
--
GitLab
From b862f26fe17df273167bd47df79e8742a1bf101c Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 13:21:11 +0200
Subject: [PATCH 279/863] floppy: use wait_event_interruptible
Convert wait loops to use wait_event_ macros.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 59 +++++++-----------------------------------
1 file changed, 9 insertions(+), 50 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index fd7085aa999fc..3fdceda857354 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -514,8 +514,6 @@ static unsigned long fdc_busy;
static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
static DECLARE_WAIT_QUEUE_HEAD(command_done);
-#define NO_SIGNAL (!interruptible || !signal_pending(current))
-
/* Errors during formatting are counted here. */
static int format_errors;
@@ -858,36 +856,15 @@ static void set_fdc(int drive)
}
/* locks the driver */
-static int _lock_fdc(int drive, bool interruptible, int line)
+static int lock_fdc(int drive, bool interruptible)
{
- if (atomic_read(&usage_count) == 0) {
- pr_err("Trying to lock fdc while usage count=0 at line %d\n",
- line);
+ if (WARN(atomic_read(&usage_count) == 0,
+ "Trying to lock fdc while usage count=0\n"))
return -1;
- }
- if (test_and_set_bit(0, &fdc_busy)) {
- DECLARE_WAITQUEUE(wait, current);
- add_wait_queue(&fdc_wait, &wait);
-
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (!test_and_set_bit(0, &fdc_busy))
- break;
-
- schedule();
-
- if (!NO_SIGNAL) {
- remove_wait_queue(&fdc_wait, &wait);
- return -EINTR;
- }
- }
+ if (wait_event_interruptible(fdc_wait, !test_and_set_bit(0, &fdc_busy)))
+ return -EINTR;
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&fdc_wait, &wait);
- flush_scheduled_work();
- }
command_status = FD_COMMAND_NONE;
__reschedule_timeout(drive, "lock fdc");
@@ -895,9 +872,6 @@ static int _lock_fdc(int drive, bool interruptible, int line)
return 0;
}
-#define lock_fdc(drive, interruptible) \
- _lock_fdc(drive, interruptible, __LINE__)
-
/* unlocks the driver */
static void unlock_fdc(void)
{
@@ -2015,25 +1989,10 @@ static int wait_til_done(void (*handler)(void), bool interruptible)
schedule_bh(handler);
- if (command_status < 2 && NO_SIGNAL) {
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(&command_done, &wait);
- for (;;) {
- set_current_state(interruptible ?
- TASK_INTERRUPTIBLE :
- TASK_UNINTERRUPTIBLE);
-
- if (command_status >= 2 || !NO_SIGNAL)
- break;
-
- is_alive(__func__, "");
- schedule();
- }
-
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&command_done, &wait);
- }
+ if (interruptible)
+ wait_event_interruptible(command_done, command_status >= 2);
+ else
+ wait_event(command_done, command_status >= 2);
if (command_status < 2) {
cancel_activity();
--
GitLab
From 01b6b67edabe864391163dc6405e2cb454f108db Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 15 Jun 2010 13:21:11 +0200
Subject: [PATCH 280/863] floppy: use warning macros
Convert assertions to use WARN(). There are several error checks in the
code for things that should never happen. Convert them to standard
warnings so kerneloops.org will see them.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 27 +++++++++++----------------
1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 3fdceda857354..82c30f9f81ca2 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -2542,10 +2542,8 @@ static int make_raw_rw_request(void)
int tracksize;
int ssize;
- if (max_buffer_sectors == 0) {
- pr_info("VFS: Block I/O scheduled on unopened device\n");
+ if (WARN(max_buffer_sectors == 0, "VFS: Block I/O scheduled on unopened device\n"))
return 0;
- }
set_fdc((long)current_req->rq_disk->private_data);
@@ -2895,19 +2893,16 @@ static void process_fd_request(void)
static void do_fd_request(struct request_queue *q)
{
- if (max_buffer_sectors == 0) {
- pr_info("VFS: %s called on non-open device\n", __func__);
+ if (WARN(max_buffer_sectors == 0,
+ "VFS: %s called on non-open device\n", __func__))
return;
- }
- if (atomic_read(&usage_count) == 0) {
- pr_info("warning: usage count=0, current_req=%p exiting\n",
- current_req);
- pr_info("sect=%ld type=%x flags=%x\n",
- (long)blk_rq_pos(current_req), current_req->cmd_type,
- current_req->cmd_flags);
+ if (WARN(atomic_read(&usage_count) == 0,
+ "warning: usage count=0, current_req=%p sect=%ld type=%x flags=%x\n",
+ current_req, (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags))
return;
- }
+
if (test_bit(0, &fdc_busy)) {
/* fdc busy, this new request will be treated when the
current one is done */
@@ -3817,10 +3812,10 @@ static int floppy_revalidate(struct gendisk *disk)
if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
test_bit(drive, &fake_change) || NO_GEOM) {
- if (atomic_read(&usage_count) == 0) {
- pr_info("VFS: revalidate called on non-open device.\n");
+ if (WARN(atomic_read(&usage_count) == 0,
+ "VFS: revalidate called on non-open device.\n"))
return -EFAULT;
- }
+
lock_fdc(drive, false);
cf = (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
test_bit(FD_VERIFY_BIT, &UDRS->flags));
--
GitLab
From 41f2df62894bfcd3bf868af916b32b90aa7168dc Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 17 Jun 2010 08:54:16 +0200
Subject: [PATCH 281/863] block: BARRIER request should imply SYNC
A barrier request should by defintion have priority in get_request
and let the queue be unplugged immediately as it's blocking all forward
progress due to the queue draining.
Most filesystems already get this implicitly by the way how submit_bh
treats the buffer_ordered flag, and gfs2 sets it explicitly. But btrfs
and XFS are still forgetting to set the flag, as is blkdev_issue_flush
and some places in DM/MD.
For XFS on metadata heavy workloads this gives a consistent speedup
in the 2-3% range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/gfs2/log.c | 2 +-
include/linux/fs.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 6a857e24f9477..efc3539ac5a1f 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -595,7 +595,7 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull)
if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags))
goto skip_barrier;
get_bh(bh);
- submit_bh(WRITE_SYNC | (1 << BIO_RW_BARRIER) | (1 << BIO_RW_META), bh);
+ submit_bh(WRITE_BARRIER | (1 << BIO_RW_META), bh);
wait_on_buffer(bh);
if (buffer_eopnotsupp(bh)) {
clear_buffer_eopnotsupp(bh);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 68ca1b0491af4..5988788314978 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -136,7 +136,7 @@ struct inodes_stat_t {
* SWRITE_SYNC
* SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
* See SWRITE.
- * WRITE_BARRIER Like WRITE, but tells the block layer that all
+ * WRITE_BARRIER Like WRITE_SYNC, but tells the block layer that all
* previously submitted writes must be safely on storage
* before this one is started. Also guarantees that when
* this write is complete, it itself is also safely on
@@ -159,7 +159,7 @@ struct inodes_stat_t {
#define SWRITE_SYNC_PLUG \
(SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
#define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
-#define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER))
+#define WRITE_BARRIER (WRITE_SYNC | (1 << BIO_RW_BARRIER))
/*
* These aren't really reads or writes, they pass down information about
--
GitLab
From b375a612ad931264b71cf162d692b4420f2578a9 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 17 Jun 2010 14:58:21 +0200
Subject: [PATCH 282/863] aha1532: remove ISA_DMA_THRESHOLD usage
We can safely remove ISA_DMA_THRESHOLD usage in aha1542. aha1542 uses
ISA_DMA_THRESHOLD to see if:
- the buffers in scatter/list are below 16MB.
- scsi_host is below 16MB.
Both checkings were added in the ancient times but aren't necessary
nowadays since we properly bounce the buffers and allocate scsi_host
below 16MB with non-zero unchecked_isa_dma.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/aha1542.c | 25 -------------------------
1 file changed, 25 deletions(-)
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 2a8cf137f609f..4f785f254c1f7 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -52,22 +52,6 @@
#define SCSI_BUF_PA(address) isa_virt_to_bus(address)
#define SCSI_SG_PA(sgent) (isa_page_to_bus(sg_page((sgent))) + (sgent)->offset)
-static void BAD_SG_DMA(Scsi_Cmnd * SCpnt,
- struct scatterlist *sgp,
- int nseg,
- int badseg)
-{
- printk(KERN_CRIT "sgpnt[%d:%d] page %p/0x%llx length %u\n",
- badseg, nseg, sg_virt(sgp),
- (unsigned long long)SCSI_SG_PA(sgp),
- sgp->length);
-
- /*
- * Not safe to continue.
- */
- panic("Buffer at physical address > 16Mb used for aha1542");
-}
-
#include<linux/stat.h>
#ifdef DEBUG
@@ -691,8 +675,6 @@ static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
}
scsi_for_each_sg(SCpnt, sg, sg_count, i) {
any2scsi(cptr[i].dataptr, SCSI_SG_PA(sg));
- if (SCSI_SG_PA(sg) + sg->length - 1 > ISA_DMA_THRESHOLD)
- BAD_SG_DMA(SCpnt, scsi_sglist(SCpnt), sg_count, i);
any2scsi(cptr[i].datalen, sg->length);
};
any2scsi(ccb[mbo].datalen, sg_count * sizeof(struct chain));
@@ -1133,16 +1115,9 @@ static int __init aha1542_detect(struct scsi_host_template * tpnt)
release_region(bases[indx], 4);
continue;
}
- /* For now we do this - until kmalloc is more intelligent
- we are resigned to stupid hacks like this */
- if (SCSI_BUF_PA(shpnt) >= ISA_DMA_THRESHOLD) {
- printk(KERN_ERR "Invalid address for shpnt with 1542.\n");
- goto unregister;
- }
if (!aha1542_test_port(bases[indx], shpnt))
goto unregister;
-
base_io = bases[indx];
/* Set the Bus on/off-times as not to ruin floppy performance */
--
GitLab
From bfe172310e58225f0d07f9354b683abacbd6a0d8 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 31 May 2010 15:59:03 +0900
Subject: [PATCH 283/863] block: kill ISA_DMA_THRESHOLD usage
block uses ISA_DMA_THRESHOLD for BLK_BOUNCE_ISA. Only SCSI uses
ISA_DMA_THRESHOLD for ancient drivers with non-zero
unchecked_isa_dma. Nowadays drivers (and subsystems) use dma_mask
properly instead of ISA_DMA_THRESHOLD.
Documentation/scsi/scsi_mid_low_api.txt says:
unchecked_isa_dma - 1=>only use bottom 16 MB of ram (ISA DMA addressing
restriction), 0=>can use full 32 bit (or better) DMA
address space
So block simply uses DMA_BIT_MASK(24) for BLK_BOUNCE_ISA for SCSI.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/blkdev.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index b8224ea4a5def..d7ae241a9e55c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -712,7 +712,7 @@ extern unsigned long blk_max_low_pfn, blk_max_pfn;
#define BLK_BOUNCE_HIGH -1ULL
#endif
#define BLK_BOUNCE_ANY (-1ULL)
-#define BLK_BOUNCE_ISA (ISA_DMA_THRESHOLD)
+#define BLK_BOUNCE_ISA (DMA_BIT_MASK(24))
/*
* default timeout for SG_IO if none specified
--
GitLab
From 7e005f79791dcd58436c88ded4a7f5aed1b82147 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 31 May 2010 15:59:04 +0900
Subject: [PATCH 284/863] remove needless ISA_DMA_THRESHOLD
Architectures don't need to define ISA_DMA_THRESHOLD anymore.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
arch/alpha/include/asm/scatterlist.h | 2 --
arch/avr32/include/asm/scatterlist.h | 2 --
arch/blackfin/include/asm/scatterlist.h | 2 --
arch/cris/include/asm/scatterlist.h | 2 --
arch/frv/include/asm/scatterlist.h | 2 --
arch/h8300/include/asm/scatterlist.h | 2 --
arch/ia64/include/asm/scatterlist.h | 9 ---------
arch/m32r/include/asm/scatterlist.h | 2 --
arch/m68k/include/asm/scatterlist.h | 3 ---
arch/microblaze/include/asm/scatterlist.h | 2 --
arch/mips/include/asm/scatterlist.h | 2 --
arch/mn10300/include/asm/scatterlist.h | 2 --
arch/parisc/include/asm/scatterlist.h | 1 -
arch/powerpc/include/asm/scatterlist.h | 3 ---
arch/s390/include/asm/scatterlist.h | 2 --
arch/score/include/asm/scatterlist.h | 2 --
arch/sh/include/asm/scatterlist.h | 2 --
arch/sparc/include/asm/scatterlist.h | 1 -
arch/x86/include/asm/scatterlist.h | 1 -
arch/xtensa/include/asm/scatterlist.h | 2 --
20 files changed, 46 deletions(-)
diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h
index 5728c52a74123..017d7471c3c45 100644
--- a/arch/alpha/include/asm/scatterlist.h
+++ b/arch/alpha/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (~0UL)
-
#endif /* !(_ALPHA_SCATTERLIST_H) */
diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
index 06394e5ead6c5..a5902d9834e81 100644
--- a/arch/avr32/include/asm/scatterlist.h
+++ b/arch/avr32/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
#endif /* __ASM_AVR32_SCATTERLIST_H */
diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h
index 64d41d34ab0b8..d177a1588958b 100644
--- a/arch/blackfin/include/asm/scatterlist.h
+++ b/arch/blackfin/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
#endif /* !(_BLACKFIN_SCATTERLIST_H) */
diff --git a/arch/cris/include/asm/scatterlist.h b/arch/cris/include/asm/scatterlist.h
index 249a7842ff5f9..f11f8f40ec4ae 100644
--- a/arch/cris/include/asm/scatterlist.h
+++ b/arch/cris/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x1fffffff)
-
#endif /* !(__ASM_CRIS_SCATTERLIST_H) */
diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h
index 1614bfd7e3a4b..0e5eb30184689 100644
--- a/arch/frv/include/asm/scatterlist.h
+++ b/arch/frv/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0xffffffffUL)
-
#endif /* !_ASM_SCATTERLIST_H */
diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h
index de08a4a2cc1c4..82130eda0e5fc 100644
--- a/arch/h8300/include/asm/scatterlist.h
+++ b/arch/h8300/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
#endif /* !(_H8300_SCATTERLIST_H) */
diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h
index f299a4fb25c86..08fd93bff1db9 100644
--- a/arch/ia64/include/asm/scatterlist.h
+++ b/arch/ia64/include/asm/scatterlist.h
@@ -2,15 +2,6 @@
#define _ASM_IA64_SCATTERLIST_H
#include <asm-generic/scatterlist.h>
-/*
- * It used to be that ISA_DMA_THRESHOLD had something to do with the
- * DMA-limits of ISA-devices. Nowadays, its only remaining use (apart
- * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
- * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
- * address of a page is that is allocated with GFP_DMA. On IA-64,
- * that's 4GB - 1.
- */
-#define ISA_DMA_THRESHOLD 0xffffffff
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/arch/m32r/include/asm/scatterlist.h b/arch/m32r/include/asm/scatterlist.h
index aeeddd8dac17b..7370b8b6243ef 100644
--- a/arch/m32r/include/asm/scatterlist.h
+++ b/arch/m32r/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x1fffffff)
-
#endif /* _ASM_M32R_SCATTERLIST_H */
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
index 175da06c6b954..312505452a1e5 100644
--- a/arch/m68k/include/asm/scatterlist.h
+++ b/arch/m68k/include/asm/scatterlist.h
@@ -3,7 +3,4 @@
#include <asm-generic/scatterlist.h>
-/* This is bogus and should go away. */
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
#endif /* !(_M68K_SCATTERLIST_H) */
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index dc4a8900cc808..35d786fe93ae0 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1,3 +1 @@
#include <asm-generic/scatterlist.h>
-
-#define ISA_DMA_THRESHOLD (~0UL)
diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h
index 9af65e79be36d..7ee0e646d82c6 100644
--- a/arch/mips/include/asm/scatterlist.h
+++ b/arch/mips/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x00ffffffUL)
-
#endif /* __ASM_SCATTERLIST_H */
diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h
index 7bd00b9e030d4..7baa4006008a3 100644
--- a/arch/mn10300/include/asm/scatterlist.h
+++ b/arch/mn10300/include/asm/scatterlist.h
@@ -13,6 +13,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
#endif /* _ASM_SCATTERLIST_H */
diff --git a/arch/parisc/include/asm/scatterlist.h b/arch/parisc/include/asm/scatterlist.h
index 2c3b79b54b28b..8bf1f0dd1f15f 100644
--- a/arch/parisc/include/asm/scatterlist.h
+++ b/arch/parisc/include/asm/scatterlist.h
@@ -5,7 +5,6 @@
#include <asm/types.h>
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (~0UL)
#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
#endif /* _ASM_PARISC_SCATTERLIST_H */
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
index 34cc78fd0ef42..de1f620bd5c94 100644
--- a/arch/powerpc/include/asm/scatterlist.h
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -12,9 +12,6 @@
#include <asm/dma.h>
#include <asm-generic/scatterlist.h>
-#ifdef __powerpc64__
-#define ISA_DMA_THRESHOLD (~0UL)
-#endif
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h
index be44d94cba549..35d786fe93ae0 100644
--- a/arch/s390/include/asm/scatterlist.h
+++ b/arch/s390/include/asm/scatterlist.h
@@ -1,3 +1 @@
-#define ISA_DMA_THRESHOLD (~0UL)
-
#include <asm-generic/scatterlist.h>
diff --git a/arch/score/include/asm/scatterlist.h b/arch/score/include/asm/scatterlist.h
index 4fa1a66582155..9f533b8362c78 100644
--- a/arch/score/include/asm/scatterlist.h
+++ b/arch/score/include/asm/scatterlist.h
@@ -1,8 +1,6 @@
#ifndef _ASM_SCORE_SCATTERLIST_H
#define _ASM_SCORE_SCATTERLIST_H
-#define ISA_DMA_THRESHOLD (~0UL)
-
#include <asm-generic/scatterlist.h>
#endif /* _ASM_SCORE_SCATTERLIST_H */
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index e38d1d4c7f6fd..98dfc3510f106 100644
--- a/arch/sh/include/asm/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
@@ -1,8 +1,6 @@
#ifndef __ASM_SH_SCATTERLIST_H
#define __ASM_SH_SCATTERLIST_H
-#define ISA_DMA_THRESHOLD phys_addr_mask()
-
#include <asm-generic/scatterlist.h>
#endif /* __ASM_SH_SCATTERLIST_H */
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
index 433e45f05fd4c..92bb638313f82 100644
--- a/arch/sparc/include/asm/scatterlist.h
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -3,7 +3,6 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (~0UL)
#define ARCH_HAS_SG_CHAIN
#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
index fb0b1874396f5..4240878b9d76f 100644
--- a/arch/x86/include/asm/scatterlist.h
+++ b/arch/x86/include/asm/scatterlist.h
@@ -3,7 +3,6 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (0x00ffffff)
#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/xtensa/include/asm/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h
index b1f9fdc1d5ba9..a0421a61d9e17 100644
--- a/arch/xtensa/include/asm/scatterlist.h
+++ b/arch/xtensa/include/asm/scatterlist.h
@@ -13,6 +13,4 @@
#include <asm-generic/scatterlist.h>
-#define ISA_DMA_THRESHOLD (~0UL)
-
#endif /* _XTENSA_SCATTERLIST_H */
--
GitLab
From 33659ebbae262228eef4e0fe990f393d1f0ed941 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Sat, 7 Aug 2010 18:17:56 +0200
Subject: [PATCH 285/863] block: remove wrappers for request type/flags
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests. This allows much easier grepping for different request
types instead of unwinding through macros.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-barrier.c | 7 +--
block/blk-core.c | 13 +++---
block/blk-exec.c | 2 +-
block/blk-merge.c | 4 +-
block/blk.h | 6 ++-
block/cfq-iosched.c | 19 +++++----
block/elevator.c | 16 ++++---
drivers/ata/libata-scsi.c | 2 +-
drivers/block/cciss.c | 49 ++++++++++++---------
drivers/block/hd.c | 2 +-
drivers/block/mg_disk.c | 4 +-
drivers/block/nbd.c | 2 +-
drivers/block/osdblk.c | 3 +-
drivers/block/paride/pd.c | 2 +-
drivers/block/ps3disk.c | 2 +-
drivers/block/ub.c | 8 ++--
drivers/block/viodasd.c | 2 +-
drivers/block/virtio_blk.c | 15 ++++---
drivers/block/xd.c | 2 +-
drivers/block/xen-blkfront.c | 4 +-
drivers/block/xsysace.c | 2 +-
drivers/cdrom/gdrom.c | 2 +-
drivers/cdrom/viocd.c | 2 +-
drivers/ide/ide-atapi.c | 17 +++++---
drivers/ide/ide-cd.c | 66 ++++++++++++++++-------------
drivers/ide/ide-disk.c | 2 +-
drivers/ide/ide-eh.c | 5 ++-
drivers/ide/ide-floppy.c | 25 +++++++----
drivers/ide/ide-io.c | 8 ++--
drivers/ide/ide-pm.c | 8 ++--
drivers/ide/ide-tape.c | 3 +-
drivers/md/dm.c | 10 ++---
drivers/memstick/core/mspro_block.c | 3 +-
drivers/message/i2o/i2o_block.c | 2 +-
drivers/mmc/card/queue.c | 2 +-
drivers/mtd/mtd_blkdevs.c | 4 +-
drivers/scsi/scsi_error.c | 10 ++---
drivers/scsi/scsi_lib.c | 5 ++-
drivers/scsi/sd.c | 12 +++---
drivers/scsi/sun3_NCR5380.c | 2 +-
drivers/scsi/sun3_scsi.c | 2 +-
drivers/scsi/sun3_scsi_vme.c | 2 +-
drivers/staging/hv/blkvsc_drv.c | 8 ++--
include/linux/blkdev.h | 41 ++++++------------
include/linux/blktrace_api.h | 2 +-
include/trace/events/block.h | 15 ++++---
kernel/trace/blktrace.c | 10 ++---
47 files changed, 236 insertions(+), 198 deletions(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 0d710c9d403b7..74e404393172c 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -79,7 +79,7 @@ unsigned blk_ordered_req_seq(struct request *rq)
*
* http://thread.gmane.org/gmane.linux.kernel/537473
*/
- if (!blk_fs_request(rq))
+ if (rq->cmd_type != REQ_TYPE_FS)
return QUEUE_ORDSEQ_DRAIN;
if ((rq->cmd_flags & REQ_ORDERED_COLOR) ==
@@ -236,7 +236,8 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp)
bool blk_do_ordered(struct request_queue *q, struct request **rqp)
{
struct request *rq = *rqp;
- const int is_barrier = blk_fs_request(rq) && blk_barrier_rq(rq);
+ const int is_barrier = rq->cmd_type == REQ_TYPE_FS &&
+ (rq->cmd_flags & REQ_HARDBARRIER);
if (!q->ordseq) {
if (!is_barrier)
@@ -261,7 +262,7 @@ bool blk_do_ordered(struct request_queue *q, struct request **rqp)
*/
/* Special requests are not subject to ordering rules. */
- if (!blk_fs_request(rq) &&
+ if (rq->cmd_type != REQ_TYPE_FS &&
rq != &q->pre_flush_rq && rq != &q->post_flush_rq)
return true;
diff --git a/block/blk-core.c b/block/blk-core.c
index b4131d29148ce..dca43a31e7255 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -184,7 +184,7 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
rq->bio, rq->biotail, rq->buffer, blk_rq_bytes(rq));
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
printk(KERN_INFO " cdb: ");
for (bit = 0; bit < BLK_MAX_CDB; bit++)
printk("%02x ", rq->cmd[bit]);
@@ -1796,7 +1796,7 @@ struct request *blk_peek_request(struct request_queue *q)
* sees this request (possibly after
* requeueing). Notify IO scheduler.
*/
- if (blk_sorted_rq(rq))
+ if (rq->cmd_flags & REQ_SORTED)
elv_activate_rq(q, rq);
/*
@@ -1984,10 +1984,11 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
* TODO: tj: This is too subtle. It would be better to let
* low level drivers do what they see fit.
*/
- if (blk_fs_request(req))
+ if (req->cmd_type == REQ_TYPE_FS)
req->errors = 0;
- if (error && (blk_fs_request(req) && !(req->cmd_flags & REQ_QUIET))) {
+ if (error && req->cmd_type == REQ_TYPE_FS &&
+ !(req->cmd_flags & REQ_QUIET)) {
printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
req->rq_disk ? req->rq_disk->disk_name : "?",
(unsigned long long)blk_rq_pos(req));
@@ -2074,7 +2075,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
req->buffer = bio_data(req->bio);
/* update sector only for requests with clear definition of sector */
- if (blk_fs_request(req) || blk_discard_rq(req))
+ if (req->cmd_type == REQ_TYPE_FS || (req->cmd_flags & REQ_DISCARD))
req->__sector += total_bytes >> 9;
/* mixed attributes always follow the first bio */
@@ -2127,7 +2128,7 @@ static void blk_finish_request(struct request *req, int error)
BUG_ON(blk_queued_rq(req));
- if (unlikely(laptop_mode) && blk_fs_request(req))
+ if (unlikely(laptop_mode) && req->cmd_type == REQ_TYPE_FS)
laptop_io_completion(&req->q->backing_dev_info);
blk_delete_timer(req);
diff --git a/block/blk-exec.c b/block/blk-exec.c
index 49557e91f0dab..e1672f14840ed 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -57,7 +57,7 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
__elv_add_request(q, rq, where, 1);
__generic_unplug_device(q);
/* the queue is stopped so it won't be plugged+unplugged */
- if (blk_pm_resume_request(rq))
+ if (rq->cmd_type == REQ_TYPE_PM_RESUME)
q->request_fn(q);
spin_unlock_irq(q->queue_lock);
}
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 5e7dc99734584..87e4fb7d0e981 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -226,7 +226,7 @@ int ll_back_merge_fn(struct request_queue *q, struct request *req,
{
unsigned short max_sectors;
- if (unlikely(blk_pc_request(req)))
+ if (unlikely(req->cmd_type == REQ_TYPE_BLOCK_PC))
max_sectors = queue_max_hw_sectors(q);
else
max_sectors = queue_max_sectors(q);
@@ -250,7 +250,7 @@ int ll_front_merge_fn(struct request_queue *q, struct request *req,
{
unsigned short max_sectors;
- if (unlikely(blk_pc_request(req)))
+ if (unlikely(req->cmd_type == REQ_TYPE_BLOCK_PC))
max_sectors = queue_max_hw_sectors(q);
else
max_sectors = queue_max_sectors(q);
diff --git a/block/blk.h b/block/blk.h
index 5ee3d7e72feb0..6e7dc87141e48 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -161,8 +161,10 @@ static inline int blk_cpu_to_group(int cpu)
*/
static inline int blk_do_io_stat(struct request *rq)
{
- return rq->rq_disk && blk_rq_io_stat(rq) &&
- (blk_fs_request(rq) || blk_discard_rq(rq));
+ return rq->rq_disk &&
+ (rq->cmd_flags & REQ_IO_STAT) &&
+ (rq->cmd_type == REQ_TYPE_FS ||
+ (rq->cmd_flags & REQ_DISCARD));
}
#endif
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 7982b830db58d..d4edeb8fceb8b 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -646,9 +646,10 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2,
return rq1;
else if (rq_is_sync(rq2) && !rq_is_sync(rq1))
return rq2;
- if (rq_is_meta(rq1) && !rq_is_meta(rq2))
+ if ((rq1->cmd_flags & REQ_RW_META) && !(rq2->cmd_flags & REQ_RW_META))
return rq1;
- else if (rq_is_meta(rq2) && !rq_is_meta(rq1))
+ else if ((rq2->cmd_flags & REQ_RW_META) &&
+ !(rq1->cmd_flags & REQ_RW_META))
return rq2;
s1 = blk_rq_pos(rq1);
@@ -1484,7 +1485,7 @@ static void cfq_remove_request(struct request *rq)
cfqq->cfqd->rq_queued--;
cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
rq_data_dir(rq), rq_is_sync(rq));
- if (rq_is_meta(rq)) {
+ if (rq->cmd_flags & REQ_RW_META) {
WARN_ON(!cfqq->meta_pending);
cfqq->meta_pending--;
}
@@ -3176,7 +3177,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
* So both queues are sync. Let the new request get disk time if
* it's a metadata request and the current queue is doing regular IO.
*/
- if (rq_is_meta(rq) && !cfqq->meta_pending)
+ if ((rq->cmd_flags & REQ_RW_META) && !cfqq->meta_pending)
return true;
/*
@@ -3230,7 +3231,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct cfq_io_context *cic = RQ_CIC(rq);
cfqd->rq_queued++;
- if (rq_is_meta(rq))
+ if (rq->cmd_flags & REQ_RW_META)
cfqq->meta_pending++;
cfq_update_io_thinktime(cfqd, cic);
@@ -3365,7 +3366,8 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
unsigned long now;
now = jiffies;
- cfq_log_cfqq(cfqd, cfqq, "complete rqnoidle %d", !!rq_noidle(rq));
+ cfq_log_cfqq(cfqd, cfqq, "complete rqnoidle %d",
+ !!(rq->cmd_flags & REQ_NOIDLE));
cfq_update_hw_tag(cfqd);
@@ -3419,11 +3421,12 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
cfq_slice_expired(cfqd, 1);
else if (sync && cfqq_empty &&
!cfq_close_cooperator(cfqd, cfqq)) {
- cfqd->noidle_tree_requires_idle |= !rq_noidle(rq);
+ cfqd->noidle_tree_requires_idle |=
+ !(rq->cmd_flags & REQ_NOIDLE);
/*
* Idling is enabled for SYNC_WORKLOAD.
* SYNC_NOIDLE_WORKLOAD idles at the end of the tree
- * only if we processed at least one !rq_noidle request
+ * only if we processed at least one !REQ_NOIDLE request
*/
if (cfqd->serving_type == SYNC_WORKLOAD
|| cfqd->noidle_tree_requires_idle
diff --git a/block/elevator.c b/block/elevator.c
index 923a9139106c5..aa99b59c03d67 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -428,7 +428,8 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq)
list_for_each_prev(entry, &q->queue_head) {
struct request *pos = list_entry_rq(entry);
- if (blk_discard_rq(rq) != blk_discard_rq(pos))
+ if ((rq->cmd_flags & REQ_DISCARD) !=
+ (pos->cmd_flags & REQ_DISCARD))
break;
if (rq_data_dir(rq) != rq_data_dir(pos))
break;
@@ -558,7 +559,7 @@ void elv_requeue_request(struct request_queue *q, struct request *rq)
*/
if (blk_account_rq(rq)) {
q->in_flight[rq_is_sync(rq)]--;
- if (blk_sorted_rq(rq))
+ if (rq->cmd_flags & REQ_SORTED)
elv_deactivate_rq(q, rq);
}
@@ -644,7 +645,8 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
break;
case ELEVATOR_INSERT_SORT:
- BUG_ON(!blk_fs_request(rq) && !blk_discard_rq(rq));
+ BUG_ON(rq->cmd_type != REQ_TYPE_FS &&
+ !(rq->cmd_flags & REQ_DISCARD));
rq->cmd_flags |= REQ_SORTED;
q->nr_sorted++;
if (rq_mergeable(rq)) {
@@ -716,7 +718,7 @@ void __elv_add_request(struct request_queue *q, struct request *rq, int where,
/*
* toggle ordered color
*/
- if (blk_barrier_rq(rq))
+ if (rq->cmd_flags & REQ_HARDBARRIER)
q->ordcolor ^= 1;
/*
@@ -729,7 +731,8 @@ void __elv_add_request(struct request_queue *q, struct request *rq, int where,
* this request is scheduling boundary, update
* end_sector
*/
- if (blk_fs_request(rq) || blk_discard_rq(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS ||
+ (rq->cmd_flags & REQ_DISCARD)) {
q->end_sector = rq_end_sector(rq);
q->boundary_rq = rq;
}
@@ -843,7 +846,8 @@ void elv_completed_request(struct request_queue *q, struct request *rq)
*/
if (blk_account_rq(rq)) {
q->in_flight[rq_is_sync(rq)]--;
- if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn)
+ if ((rq->cmd_flags & REQ_SORTED) &&
+ e->ops->elevator_completed_req_fn)
e->ops->elevator_completed_req_fn(q, rq);
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a54273d2c3c6a..a5c08b082edbe 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1111,7 +1111,7 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev)
*/
static int atapi_drain_needed(struct request *rq)
{
- if (likely(!blk_pc_request(rq)))
+ if (likely(rq->cmd_type != REQ_TYPE_BLOCK_PC))
return 0;
if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW))
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 10a0268a1f92c..11b377762b8ef 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1783,7 +1783,7 @@ static void cciss_softirq_done(struct request *rq)
#endif /* CCISS_DEBUG */
/* set the residual count for pc requests */
- if (blk_pc_request(rq))
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
rq->resid_len = cmd->err_info->ResidualCnt;
blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
@@ -2983,7 +2983,7 @@ static inline int evaluate_target_status(ctlr_info_t *h,
driver_byte = DRIVER_OK;
msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */
- if (blk_pc_request(cmd->rq))
+ if (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC)
host_byte = DID_PASSTHROUGH;
else
host_byte = DID_OK;
@@ -2992,7 +2992,7 @@ static inline int evaluate_target_status(ctlr_info_t *h,
host_byte, driver_byte);
if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
- if (!blk_pc_request(cmd->rq))
+ if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC)
printk(KERN_WARNING "cciss: cmd %p "
"has SCSI Status 0x%x\n",
cmd, cmd->err_info->ScsiStatus);
@@ -3002,15 +3002,17 @@ static inline int evaluate_target_status(ctlr_info_t *h,
/* check the sense key */
sense_key = 0xf & cmd->err_info->SenseInfo[2];
/* no status or recovered error */
- if (((sense_key == 0x0) || (sense_key == 0x1)) && !blk_pc_request(cmd->rq))
+ if (((sense_key == 0x0) || (sense_key == 0x1)) &&
+ (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC))
error_value = 0;
if (check_for_unit_attention(h, cmd)) {
- *retry_cmd = !blk_pc_request(cmd->rq);
+ *retry_cmd = !(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC);
return 0;
}
- if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
+ /* Not SG_IO or similar? */
+ if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC) {
if (error_value != 0)
printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
" sense key = 0x%x\n", cmd, sense_key);
@@ -3052,7 +3054,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
rq->errors = evaluate_target_status(h, cmd, &retry_cmd);
break;
case CMD_DATA_UNDERRUN:
- if (blk_fs_request(cmd->rq)) {
+ if (cmd->rq->cmd_type == REQ_TYPE_FS) {
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data underrun "
"reported\n", cmd);
@@ -3060,7 +3062,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
}
break;
case CMD_DATA_OVERRUN:
- if (blk_fs_request(cmd->rq))
+ if (cmd->rq->cmd_type == REQ_TYPE_FS)
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data overrun "
"reported\n", cmd);
@@ -3070,42 +3072,48 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
"reported invalid\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_PROTOCOL_ERR:
printk(KERN_WARNING "cciss: cmd %p has "
"protocol error \n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_HARDWARE_ERR:
printk(KERN_WARNING "cciss: cmd %p had "
" hardware error\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_CONNECTION_LOST:
printk(KERN_WARNING "cciss: cmd %p had "
"connection lost\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_ABORTED:
printk(KERN_WARNING "cciss: cmd %p was "
"aborted\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_ABORT_FAILED:
printk(KERN_WARNING "cciss: cmd %p reports "
"abort failed\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_UNSOLICITED_ABORT:
printk(KERN_WARNING "cciss%d: unsolicited "
@@ -3121,13 +3129,15 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
"many times\n", h->ctlr, cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_TIMEOUT:
printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
break;
default:
printk(KERN_WARNING "cciss: cmd %p returned "
@@ -3135,7 +3145,8 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
cmd->err_info->CommandStatus);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
- blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ DID_PASSTHROUGH : DID_ERROR);
}
after_error_processing:
@@ -3294,7 +3305,7 @@ static void do_cciss_request(struct request_queue *q)
c->Header.SGList = h->max_cmd_sgentries;
set_performant_mode(h, c);
- if (likely(blk_fs_request(creq))) {
+ if (likely(creq->cmd_type == REQ_TYPE_FS)) {
if(h->cciss_read == CCISS_READ_10) {
c->Request.CDB[1] = 0;
c->Request.CDB[2] = (start_blk >> 24) & 0xff; /* MSB */
@@ -3324,7 +3335,7 @@ static void do_cciss_request(struct request_queue *q)
c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
c->Request.CDB[14] = c->Request.CDB[15] = 0;
}
- } else if (blk_pc_request(creq)) {
+ } else if (creq->cmd_type == REQ_TYPE_BLOCK_PC) {
c->Request.CDBLen = creq->cmd_len;
memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
} else {
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index 81c78b3ce2df1..30ec6b37424ef 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -627,7 +627,7 @@ static void hd_request(void)
req_data_dir(req) == READ ? "read" : "writ",
cyl, head, sec, nsect, req->buffer);
#endif
- if (blk_fs_request(req)) {
+ if (req->cmd_type == REQ_TYPE_FS) {
switch (rq_data_dir(req)) {
case READ:
hd_out(disk, nsect, sec, head, cyl, ATA_CMD_PIO_READ,
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index 28db925dbdad9..b82c5ce5e9dfa 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -670,7 +670,7 @@ static void mg_request_poll(struct request_queue *q)
break;
}
- if (unlikely(!blk_fs_request(host->req))) {
+ if (unlikely(host->req->cmd_type != REQ_TYPE_FS)) {
mg_end_request_cur(host, -EIO);
continue;
}
@@ -756,7 +756,7 @@ static void mg_request(struct request_queue *q)
continue;
}
- if (unlikely(!blk_fs_request(req))) {
+ if (unlikely(req->cmd_type != REQ_TYPE_FS)) {
mg_end_request_cur(host, -EIO);
continue;
}
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 218d091f3c521..2e74e7d475cab 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -448,7 +448,7 @@ static void nbd_clear_que(struct nbd_device *lo)
static void nbd_handle_req(struct nbd_device *lo, struct request *req)
{
- if (!blk_fs_request(req))
+ if (req->cmd_type != REQ_TYPE_FS)
goto error_out;
nbd_cmd(req) = NBD_CMD_READ;
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index 6cd8b705b11be..819002ba34338 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -310,7 +310,8 @@ static void osdblk_rq_fn(struct request_queue *q)
break;
/* filter out block requests we don't understand */
- if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) {
+ if (rq->cmd_type != REQ_TYPE_FS &&
+ !(rq->cmd_flags & REQ_HARDBARRIER)) {
blk_end_request_all(rq, 0);
continue;
}
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index c1e5cd029b23b..4e8b9bff3abea 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -439,7 +439,7 @@ static char *pd_buf; /* buffer for request in progress */
static enum action do_pd_io_start(void)
{
- if (blk_special_request(pd_req)) {
+ if (pd_req->cmd_type == REQ_TYPE_SPECIAL) {
phase = pd_special;
return pd_special();
}
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index 3b419e3fffa1d..5f208c0bf1563 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -196,7 +196,7 @@ static void ps3disk_do_request(struct ps3_storage_device *dev,
dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__);
while ((req = blk_fetch_request(q))) {
- if (blk_fs_request(req)) {
+ if (req->cmd_type == REQ_TYPE_FS) {
if (ps3disk_submit_request_sg(dev, req))
break;
} else if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 0536b5b29adcb..034b34440ffa3 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -648,7 +648,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
return 0;
}
- if (lun->changed && !blk_pc_request(rq)) {
+ if (lun->changed && rq->cmd_type != REQ_TYPE_BLOCK_PC)
blk_start_request(rq);
ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
return 0;
@@ -684,7 +684,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
}
urq->nsg = n_elem;
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
ub_cmd_build_packet(sc, lun, cmd, urq);
} else {
ub_cmd_build_block(sc, lun, cmd, urq);
@@ -781,7 +781,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
rq = urq->rq;
if (cmd->error == 0) {
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
if (cmd->act_len >= rq->resid_len)
rq->resid_len = 0;
else
@@ -795,7 +795,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
}
}
} else {
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
rq->sense_len = UB_SENSE_SIZE;
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index 788d93882ab96..5663d3c284c81 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -361,7 +361,7 @@ static void do_viodasd_request(struct request_queue *q)
if (req == NULL)
return;
/* check that request contains a valid command */
- if (!blk_fs_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS) {
viodasd_end_request(req, -EIO, blk_rq_sectors(req));
continue;
}
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 258bc2ae28856..774144334ecee 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -65,13 +65,16 @@ static void blk_done(struct virtqueue *vq)
break;
}
- if (blk_pc_request(vbr->req)) {
+ switch (vbr->req->cmd_type) {
+ case REQ_TYPE_BLOCK_PC:
vbr->req->resid_len = vbr->in_hdr.residual;
vbr->req->sense_len = vbr->in_hdr.sense_len;
vbr->req->errors = vbr->in_hdr.errors;
- }
- if (blk_special_request(vbr->req))
+ break;
+ case REQ_TYPE_SPECIAL:
vbr->req->errors = (error != 0);
+ break;
+ }
__blk_end_request_all(vbr->req, error);
list_del(&vbr->list);
@@ -123,7 +126,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
BUG();
}
- if (blk_barrier_rq(vbr->req))
+ if (vbr->req->cmd_flags & REQ_HARDBARRIER)
vbr->out_hdr.type |= VIRTIO_BLK_T_BARRIER;
sg_set_buf(&vblk->sg[out++], &vbr->out_hdr, sizeof(vbr->out_hdr));
@@ -134,12 +137,12 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
* block, and before the normal inhdr we put the sense data and the
* inhdr with additional status information before the normal inhdr.
*/
- if (blk_pc_request(vbr->req))
+ if (vbr->req->cmd_type == REQ_TYPE_BLOCK_PC)
sg_set_buf(&vblk->sg[out++], vbr->req->cmd, vbr->req->cmd_len);
num = blk_rq_map_sg(q, vbr->req, vblk->sg + out);
- if (blk_pc_request(vbr->req)) {
+ if (vbr->req->cmd_type == REQ_TYPE_BLOCK_PC) {
sg_set_buf(&vblk->sg[num + out + in++], vbr->req->sense, 96);
sg_set_buf(&vblk->sg[num + out + in++], &vbr->in_hdr,
sizeof(vbr->in_hdr));
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index 18a80ff57ce89..4dc2983760985 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -322,7 +322,7 @@ static void do_xd_request (struct request_queue * q)
int res = -EIO;
int retry;
- if (!blk_fs_request(req))
+ if (req->cmd_type != REQ_TYPE_FS) {
goto done;
if (block + count > get_capacity(req->rq_disk))
goto done;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 82ed403147c06..495533e665428 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -238,7 +238,7 @@ static int blkif_queue_request(struct request *req)
ring_req->operation = rq_data_dir(req) ?
BLKIF_OP_WRITE : BLKIF_OP_READ;
- if (blk_barrier_rq(req))
+ if (req->cmd_flags & REQ_HARDBARRIER)
ring_req->operation = BLKIF_OP_WRITE_BARRIER;
ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
@@ -309,7 +309,7 @@ static void do_blkif_request(struct request_queue *rq)
blk_start_request(req);
- if (!blk_fs_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS) {
__blk_end_request_all(req, -EIO);
continue;
}
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index a7b83c0a7eb55..ac278ac908d50 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -465,7 +465,7 @@ struct request *ace_get_next_request(struct request_queue * q)
struct request *req;
while ((req = blk_peek_request(q)) != NULL) {
- if (blk_fs_request(req))
+ if (req->cmd_type == REQ_TYPE_FS)
break;
blk_start_request(req);
__blk_end_request_all(req, -EIO);
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 03c71f7698cb6..7c05ddc63ae82 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -643,7 +643,7 @@ static void gdrom_request(struct request_queue *rq)
struct request *req;
while ((req = blk_fetch_request(rq)) != NULL) {
- if (!blk_fs_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS) {
printk(KERN_DEBUG "GDROM: Non-fs request ignored\n");
__blk_end_request_all(req, -EIO);
continue;
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 451cd7071b1df..14e420168764c 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -298,7 +298,7 @@ static void do_viocd_request(struct request_queue *q)
struct request *req;
while ((rwreq == 0) && ((req = blk_fetch_request(q)) != NULL)) {
- if (!blk_fs_request(req))
+ if (req->cmd_type != REQ_TYPE_FS)
__blk_end_request_all(req, -EIO);
else if (send_request(req) < 0) {
printk(VIOCD_KERN_WARNING
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index f9daffd7d0e31..3117a894d20e0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -190,7 +190,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
BUG_ON(sense_len > sizeof(*sense));
- if (blk_sense_request(rq) || drive->sense_rq_armed)
+ if (rq->cmd_type == REQ_TYPE_SENSE || drive->sense_rq_armed)
return;
memset(sense, 0, sizeof(*sense));
@@ -307,13 +307,16 @@ EXPORT_SYMBOL_GPL(ide_cd_expiry);
int ide_cd_get_xferlen(struct request *rq)
{
- if (blk_fs_request(rq))
+ switch (rq->cmd_type)
+ case REQ_TYPE_FS:
return 32768;
- else if (blk_sense_request(rq) || blk_pc_request(rq) ||
- rq->cmd_type == REQ_TYPE_ATA_PC)
+ case REQ_TYPE_SENSE:
+ case REQ_TYPE_BLOCK_PC:
+ case REQ_TYPE_ATA_PC:
return blk_rq_bytes(rq);
- else
+ default:
return 0;
+ }
}
EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
@@ -474,12 +477,12 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
if (uptodate == 0)
drive->failed_pc = NULL;
- if (blk_special_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_SPECIAL)
rq->errors = 0;
error = 0;
} else {
- if (blk_fs_request(rq) == 0 && uptodate <= 0) {
+ if (req->cmd_type != REQ_TYPE_FS && uptodate <= 0) {
if (rq->errors == 0)
rq->errors = -EIO;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 64207df8da82f..26a3688de467f 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -176,7 +176,7 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
if (!sense->valid)
break;
if (failed_command == NULL ||
- !blk_fs_request(failed_command))
+ failed_command->cmd_type != REQ_TYPE_FS)
break;
sector = (sense->information[0] << 24) |
(sense->information[1] << 16) |
@@ -292,7 +292,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
"stat 0x%x",
rq->cmd[0], rq->cmd_type, err, stat);
- if (blk_sense_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_SENSE) {
/*
* We got an error trying to get sense info from the drive
* (probably while trying to recover from a former error).
@@ -303,7 +303,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
}
/* if we have an error, pass CHECK_CONDITION as the SCSI status byte */
- if (blk_pc_request(rq) && !rq->errors)
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC && !rq->errors)
rq->errors = SAM_STAT_CHECK_CONDITION;
if (blk_noretry_request(rq))
@@ -311,13 +311,14 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
switch (sense_key) {
case NOT_READY:
- if (blk_fs_request(rq) && rq_data_dir(rq) == WRITE) {
+ if (rq->cmd_type == REQ_TYPE_FS && rq_data_dir(rq) == WRITE) {
if (ide_cd_breathe(drive, rq))
return 1;
} else {
cdrom_saw_media_change(drive);
- if (blk_fs_request(rq) && !blk_rq_quiet(rq))
+ if (rq->cmd_type == REQ_TYPE_FS &&
+ !(rq->cmd_flags & REQ_QUIET)) {
printk(KERN_ERR PFX "%s: tray open\n",
drive->name);
}
@@ -326,7 +327,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
case UNIT_ATTENTION:
cdrom_saw_media_change(drive);
- if (blk_fs_request(rq) == 0)
+ if (rq->cmd_type != REQ_TYPE_FS)
return 0;
/*
@@ -352,7 +353,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
* No point in retrying after an illegal request or data
* protect error.
*/
- if (!blk_rq_quiet(rq))
+ if (!(rq->cmd_flags & REQ_QUIET))
ide_dump_status(drive, "command error", stat);
do_end_request = 1;
break;
@@ -361,20 +362,20 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
* No point in re-trying a zillion times on a bad sector.
* If we got here the error is not correctable.
*/
- if (!blk_rq_quiet(rq))
+ if (!(rq->cmd_flags & REQ_QUIET))
ide_dump_status(drive, "media error "
"(bad sector)", stat);
do_end_request = 1;
break;
case BLANK_CHECK:
/* disk appears blank? */
- if (!blk_rq_quiet(rq))
+ if (!(rq->cmd_flags & REQ_QUIET))
ide_dump_status(drive, "media error (blank)",
stat);
do_end_request = 1;
break;
default:
- if (blk_fs_request(rq) == 0)
+ if (req->cmd_type != REQ_TYPE_FS)
break;
if (err & ~ATA_ABORTED) {
/* go to the default handler for other errors */
@@ -385,7 +386,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
do_end_request = 1;
}
- if (blk_fs_request(rq) == 0) {
+ if (rq->cmd_type != REQ_TYPE_FS) {
rq->cmd_flags |= REQ_FAILED;
do_end_request = 1;
}
@@ -525,7 +526,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
ide_expiry_t *expiry = NULL;
int dma_error = 0, dma, thislen, uptodate = 0;
int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0;
- int sense = blk_sense_request(rq);
+ int sense = (rq->cmd_type == REQ_TYPE_SENSE);
unsigned int timeout;
u16 len;
u8 ireason, stat;
@@ -568,7 +569,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
ide_read_bcount_and_ireason(drive, &len, &ireason);
- thislen = blk_fs_request(rq) ? len : cmd->nleft;
+ thislen = (rq->cmd_type == REQ_TYPE_FS) ? len : cmd->nleft;
if (thislen > len)
thislen = len;
@@ -577,7 +578,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
/* If DRQ is clear, the command has completed. */
if ((stat & ATA_DRQ) == 0) {
- if (blk_fs_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS) {
/*
* If we're not done reading/writing, complain.
* Otherwise, complete the command normally.
@@ -591,7 +592,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
rq->cmd_flags |= REQ_FAILED;
uptodate = 0;
}
- } else if (!blk_pc_request(rq)) {
+ } else if (rq->cmd_type != REQ_TYPE_BLOCK_PC) {
ide_cd_request_sense_fixup(drive, cmd);
uptodate = cmd->nleft ? 0 : 1;
@@ -640,7 +641,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
/* pad, if necessary */
if (len > 0) {
- if (blk_fs_request(rq) == 0 || write == 0)
+ if (rq->cmd_type != REQ_TYPE_FS || write == 0)
ide_pad_transfer(drive, write, len);
else {
printk(KERN_ERR PFX "%s: confused, missing data\n",
@@ -649,11 +650,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
}
}
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
timeout = rq->timeout;
} else {
timeout = ATAPI_WAIT_PC;
- if (!blk_fs_request(rq))
+ if (rq->cmd_type != REQ_TYPE_FS)
expiry = ide_cd_expiry;
}
@@ -662,7 +663,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
return ide_started;
out_end:
- if (blk_pc_request(rq) && rc == 0) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC && rc == 0) {
rq->resid_len = 0;
blk_end_request_all(rq, 0);
hwif->rq = NULL;
@@ -670,7 +671,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
if (sense && uptodate)
ide_cd_complete_failed_rq(drive, rq);
- if (blk_fs_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS) {
if (cmd->nleft == 0)
uptodate = 1;
} else {
@@ -682,7 +683,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
ide_cd_error_cmd(drive, cmd);
/* make sure it's fully ended */
- if (blk_fs_request(rq) == 0) {
+ if (rq->cmd_type != REQ_TYPE_FS) {
rq->resid_len -= cmd->nbytes - cmd->nleft;
if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE))
rq->resid_len += cmd->last_xfer_len;
@@ -742,7 +743,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
ide_debug_log(IDE_DBG_PC, "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x",
rq->cmd[0], rq->cmd_type);
- if (blk_pc_request(rq))
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
rq->cmd_flags |= REQ_QUIET;
else
rq->cmd_flags &= ~REQ_FAILED;
@@ -783,21 +784,26 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
if (drive->debug_mask & IDE_DBG_RQ)
blk_dump_rq_flags(rq, "ide_cd_do_request");
- if (blk_fs_request(rq)) {
+ switch (rq->cmd_type) {
+ case REQ_TYPE_FS:
if (cdrom_start_rw(drive, rq) == ide_stopped)
goto out_end;
- } else if (blk_sense_request(rq) || blk_pc_request(rq) ||
- rq->cmd_type == REQ_TYPE_ATA_PC) {
+ break;
+ case REQ_TYPE_SENSE:
+ case REQ_TYPE_BLOCK_PC:
+ case REQ_TYPE_ATA_PC:
if (!rq->timeout)
rq->timeout = ATAPI_WAIT_PC;
cdrom_do_block_pc(drive, rq);
- } else if (blk_special_request(rq)) {
+ break;
+ case REQ_TYPE_SPECIAL:
/* right now this can only be a reset... */
uptodate = 1;
goto out_end;
- } else
+ default:
BUG();
+ }
/* prepare sense request for this command */
ide_prep_sense(drive, rq);
@@ -809,7 +815,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
cmd.rq = rq;
- if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) {
ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
}
@@ -1365,9 +1371,9 @@ static int ide_cdrom_prep_pc(struct request *rq)
static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq)
{
- if (blk_fs_request(rq))
+ if (rq->cmd_type == REQ_TYPE_FS)
return ide_cdrom_prep_fs(q, rq);
- else if (blk_pc_request(rq))
+ else if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
return ide_cdrom_prep_pc(rq);
return 0;
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 33d65039cce9d..df3d91ba1c96a 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -184,7 +184,7 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
ide_hwif_t *hwif = drive->hwif;
BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
- BUG_ON(!blk_fs_request(rq));
+ BUG_ON(rq->cmd_type != REQ_TYPE_FS);
ledtrig_ide_activity();
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index e9abf2c3c3354..c0aa93fb7a60e 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -122,7 +122,7 @@ ide_startstop_t ide_error(ide_drive_t *drive, const char *msg, u8 stat)
return ide_stopped;
/* retry only "normal" I/O: */
- if (!blk_fs_request(rq)) {
+ if (rq->cmd_type != REQ_TYPE_FS) {
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
struct ide_cmd *cmd = rq->special;
@@ -146,7 +146,8 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err)
{
struct request *rq = drive->hwif->rq;
- if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) {
+ if (rq && rq->cmd_type == REQ_TYPE_SPECIAL &&
+ rq->cmd[0] == REQ_DRIVE_RESET) {
if (err <= 0 && rq->errors == 0)
rq->errors = -EIO;
ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq));
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 4713bdca20b6a..c7d0737bb18a9 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -73,7 +73,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc)
drive->failed_pc = NULL;
if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
- (rq && blk_pc_request(rq)))
+ (rq && rq->cmd_type == REQ_TYPE_BLOCK_PC))
uptodate = 1; /* FIXME */
else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
@@ -98,7 +98,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc)
"Aborting request!\n");
}
- if (blk_special_request(rq))
+ if (rq->cmd_type == REQ_TYPE_SPECIAL)
rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
return uptodate;
@@ -247,14 +247,16 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
} else
printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
- if (blk_special_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_SPECIAL) {
rq->errors = 0;
ide_complete_rq(drive, 0, blk_rq_bytes(rq));
return ide_stopped;
} else
goto out_end;
}
- if (blk_fs_request(rq)) {
+
+ switch (rq->cmd_type) {
+ case REQ_TYPE_FS:
if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
(blk_rq_sectors(rq) % floppy->bs_factor)) {
printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
@@ -263,13 +265,18 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
}
pc = &floppy->queued_pc;
idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
- } else if (blk_special_request(rq) || blk_sense_request(rq)) {
+ break;
+ case REQ_TYPE_SPECIAL:
+ case REQ_TYPE_SENSE:
pc = (struct ide_atapi_pc *)rq->special;
- } else if (blk_pc_request(rq)) {
+ break;
+ case REQ_TYPE_BLOCK_PC:
pc = &floppy->queued_pc;
idefloppy_blockpc_cmd(floppy, pc, rq);
- } else
+ break;
+ default:
BUG();
+ }
ide_prep_sense(drive, rq);
@@ -280,7 +287,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
cmd.rq = rq;
- if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+ if (rq->cmd_type == REQ_TYPE_FS || blk_rq_bytes(rq)) {
ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
}
@@ -290,7 +297,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
return ide_floppy_issue_pc(drive, &cmd, pc);
out_end:
drive->failed_pc = NULL;
- if (blk_fs_request(rq) == 0 && rq->errors == 0)
+ if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0)
rq->errors = -EIO;
ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
return ide_stopped;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 172ac92181549..9304a7e54d9e9 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL(ide_complete_rq);
void ide_kill_rq(ide_drive_t *drive, struct request *rq)
{
- u8 drv_req = blk_special_request(rq) && rq->rq_disk;
+ u8 drv_req = (rq->cmd_type == REQ_TYPE_SPECIAL) && rq->rq_disk;
u8 media = drive->media;
drive->failed_pc = NULL;
@@ -145,7 +145,7 @@ void ide_kill_rq(ide_drive_t *drive, struct request *rq)
} else {
if (media == ide_tape)
rq->errors = IDE_DRV_ERROR_GENERAL;
- else if (blk_fs_request(rq) == 0 && rq->errors == 0)
+ else if (rq->cmd_type != REQ_TYPE_FS && rq->errors == 0)
rq->errors = -EIO;
}
@@ -307,7 +307,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
{
ide_startstop_t startstop;
- BUG_ON(!blk_rq_started(rq));
+ BUG_ON(!(rq->cmd_flags & REQ_STARTED));
#ifdef DEBUG
printk("%s: start_request: current=0x%08lx\n",
@@ -353,7 +353,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_rq(drive, rq);
return startstop;
- } else if (!rq->rq_disk && blk_special_request(rq))
+ } else if (!rq->rq_disk && rq->cmd_type == REQ_TYPE_SPECIAL) {
/*
* TODO: Once all ULDs have been modified to
* check for specific op codes rather than
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 1c08311b0a0e0..92406097efebc 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -191,10 +191,10 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
#ifdef DEBUG_PM
printk("%s: completing PM request, %s\n", drive->name,
- blk_pm_suspend_request(rq) ? "suspend" : "resume");
+ (rq->cmd_type == REQ_TYPE_PM_SUSPEND) ? "suspend" : "resume");
#endif
spin_lock_irqsave(q->queue_lock, flags);
- if (blk_pm_suspend_request(rq))
+ if (rq->cmd_type == REQ_TYPE_PM_SUSPEND)
blk_stop_queue(q);
else
drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
@@ -210,11 +210,11 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
{
struct request_pm_state *pm = rq->special;
- if (blk_pm_suspend_request(rq) &&
+ if (rq->cmd_type == REQ_TYPE_PM_SUSPEND &&
pm->pm_step == IDE_PM_START_SUSPEND)
/* Mark drive blocked when starting the suspend sequence. */
drive->dev_flags |= IDE_DFLAG_BLOCKED;
- else if (blk_pm_resume_request(rq) &&
+ else if (rq->cmd_type == REQ_TYPE_PM_RESUME &&
pm->pm_step == IDE_PM_START_RESUME) {
/*
* The first thing we do on wakeup is to wait for BSY bit to
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b07232880ec98..635fd72d4728a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -577,7 +577,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
rq->cmd[0], (unsigned long long)blk_rq_pos(rq),
blk_rq_sectors(rq));
- BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq)));
+ BUG_ON(!(rq->cmd_type == REQ_TYPE_SPECIAL ||
+ rq->cmd_type == REQ_TYPE_SENSE));
/* Retry a failed packet command */
if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index d21e1284604f6..1e0e6dd515010 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -792,12 +792,12 @@ static void dm_end_request(struct request *clone, int error)
{
int rw = rq_data_dir(clone);
int run_queue = 1;
- bool is_barrier = blk_barrier_rq(clone);
+ bool is_barrier = clone->cmd_flags & REQ_HARDBARRIER;
struct dm_rq_target_io *tio = clone->end_io_data;
struct mapped_device *md = tio->md;
struct request *rq = tio->orig;
- if (blk_pc_request(rq) && !is_barrier) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC && !is_barrier) {
rq->errors = clone->errors;
rq->resid_len = clone->resid_len;
@@ -844,7 +844,7 @@ void dm_requeue_unmapped_request(struct request *clone)
struct request_queue *q = rq->q;
unsigned long flags;
- if (unlikely(blk_barrier_rq(clone))) {
+ if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) {
/*
* Barrier clones share an original request.
* Leave it to dm_end_request(), which handles this special
@@ -943,7 +943,7 @@ static void dm_complete_request(struct request *clone, int error)
struct dm_rq_target_io *tio = clone->end_io_data;
struct request *rq = tio->orig;
- if (unlikely(blk_barrier_rq(clone))) {
+ if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) {
/*
* Barrier clones share an original request. So can't use
* softirq_done with the original.
@@ -972,7 +972,7 @@ void dm_kill_unmapped_request(struct request *clone, int error)
struct dm_rq_target_io *tio = clone->end_io_data;
struct request *rq = tio->orig;
- if (unlikely(blk_barrier_rq(clone))) {
+ if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) {
/*
* Barrier clones share an original request.
* Leave it to dm_end_request(), which handles this special
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 8327e248520ac..56645408d225f 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -805,7 +805,8 @@ static void mspro_block_start(struct memstick_dev *card)
static int mspro_block_prepare_req(struct request_queue *q, struct request *req)
{
- if (!blk_fs_request(req) && !blk_pc_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS &&
+ req->cmd_type != REQ_TYPE_BLOCK_PC) {
blk_dump_rq_flags(req, "MSPro unsupported request");
return BLKPREP_KILL;
}
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index fc593fbab6963..108f0c2b2bfd6 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -883,7 +883,7 @@ static void i2o_block_request_fn(struct request_queue *q)
if (!req)
break;
- if (blk_fs_request(req)) {
+ if (req->cmd_type == REQ_TYPE_FS) {
struct i2o_block_delayed_request *dreq;
struct i2o_block_request *ireq = req->special;
unsigned int queue_depth;
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index d6ded247d9411..ec92bcbdeddbb 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -32,7 +32,7 @@ static int mmc_prep_request(struct request_queue *q, struct request *req)
/*
* We only like normal block requests.
*/
- if (!blk_fs_request(req)) {
+ if (req->cmd_type != REQ_TYPE_FS) {
blk_dump_rq_flags(req, "MMC bad request");
return BLKPREP_KILL;
}
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 03e19c1965cc0..475af42745cbf 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -73,14 +73,14 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
buf = req->buffer;
- if (!blk_fs_request(req))
+ if (req->cmd_type != REQ_TYPE_FS)
return -EIO;
if (blk_rq_pos(req) + blk_rq_cur_sectors(req) >
get_capacity(req->rq_disk))
return -EIO;
- if (blk_discard_rq(req))
+ if (req->cmd_flags & REQ_DISCARD)
return tr->discard(dev, block, nsect);
switch(rq_data_dir(req)) {
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index a5d630f5f5199..1b88af89d0c7f 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -307,7 +307,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
(sshdr.asc == 0x04) && (sshdr.ascq == 0x02))
return FAILED;
- if (blk_barrier_rq(scmd->request))
+ if (scmd->request->cmd_flags & REQ_HARDBARRIER)
/*
* barrier requests should always retry on UA
* otherwise block will get a spurious error
@@ -1318,16 +1318,16 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
case DID_OK:
break;
case DID_BUS_BUSY:
- return blk_failfast_transport(scmd->request);
+ return (scmd->request->cmd_flags & REQ_FAILFAST_TRANSPORT);
case DID_PARITY:
- return blk_failfast_dev(scmd->request);
+ return (scmd->request->cmd_flags & REQ_FAILFAST_DEV);
case DID_ERROR:
if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
status_byte(scmd->result) == RESERVATION_CONFLICT)
return 0;
/* fall through */
case DID_SOFT_ERROR:
- return blk_failfast_driver(scmd->request);
+ return (scmd->request->cmd_flags & REQ_FAILFAST_DRIVER);
}
switch (status_byte(scmd->result)) {
@@ -1336,7 +1336,7 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
* assume caller has checked sense and determinted
* the check condition was retryable.
*/
- return blk_failfast_dev(scmd->request);
+ return (scmd->request->cmd_flags & REQ_FAILFAST_DEV);
}
return 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 1646fe7cbd4b7..5f1160841b0e1 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -722,7 +722,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
sense_deferred = scsi_sense_is_deferred(&sshdr);
}
- if (blk_pc_request(req)) { /* SG_IO ioctl from block level */
+ if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */
req->errors = result;
if (result) {
if (sense_valid && req->sense) {
@@ -757,7 +757,8 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
}
}
- BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */
+ /* no bidi support for !REQ_TYPE_BLOCK_PC yet */
+ BUG_ON(blk_bidi_rq(req));
/*
* Next deal with any sectors which we were able to correctly
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 8802e48bc0634..a3fdf4dc59da7 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -485,7 +485,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
* Discard request come in as REQ_TYPE_FS but we turn them into
* block PC requests to make life easier.
*/
- if (blk_discard_rq(rq))
+ if (rq->cmd_flags & REQ_DISCARD)
ret = sd_prepare_discard(rq);
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
@@ -636,7 +636,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
SCpnt->cmnd[7] = 0x18;
SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
- SCpnt->cmnd[10] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
+ SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
/* LBA */
SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
@@ -661,7 +661,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
} else if (block > 0xffffffff) {
SCpnt->cmnd[0] += READ_16 - READ_6;
- SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
+ SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
@@ -682,7 +682,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
this_count = 0xffff;
SCpnt->cmnd[0] += READ_10 - READ_6;
- SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
+ SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
@@ -691,7 +691,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
} else {
- if (unlikely(blk_fua_rq(rq))) {
+ if (unlikely(rq->cmd_flags & REQ_FUA)) {
/*
* This happens only if this drive failed
* 10byte rw command with ILLEGAL_REQUEST
@@ -1112,7 +1112,7 @@ static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
u64 bad_lba;
int info_valid;
- if (!blk_fs_request(scmd->request))
+ if (scmd->request->cmd_type != REQ_TYPE_FS)
return 0;
info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index b5838d547c68a..713620ed70d96 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -2022,7 +2022,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance)
if((count > SUN3_DMA_MINSIZE) && (sun3_dma_setup_done
!= cmd))
{
- if(blk_fs_request(cmd->request)) {
+ if (cmd->request->cmd_type == REQ_TYPE_FS) {
sun3scsi_dma_setup(d, count,
rq_data_dir(cmd->request));
sun3_dma_setup_done = cmd;
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index e606cf0a2eb70..613f5880d1357 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -524,7 +524,7 @@ static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
struct scsi_cmnd *cmd,
int write_flag)
{
- if(blk_fs_request(cmd->request))
+ if (cmd->request->cmd_type == REQ_TYPE_FS)
return wanted;
else
return 0;
diff --git a/drivers/scsi/sun3_scsi_vme.c b/drivers/scsi/sun3_scsi_vme.c
index aaa4fd0dd1b90..7c526b8e30ac2 100644
--- a/drivers/scsi/sun3_scsi_vme.c
+++ b/drivers/scsi/sun3_scsi_vme.c
@@ -458,7 +458,7 @@ static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
struct scsi_cmnd *cmd,
int write_flag)
{
- if(blk_fs_request(cmd->request))
+ if (cmd->request->cmd_type == REQ_TYPE_FS)
return wanted;
else
return 0;
diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c
index 61bd0be5fb189..a9aff90e58e0e 100644
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -823,7 +823,8 @@ static void blkvsc_init_rw(struct blkvsc_request *blkvsc_req)
blkvsc_req->cmnd[0] = READ_16;
}
- blkvsc_req->cmnd[1] |= blk_fua_rq(blkvsc_req->req) ? 0x8 : 0;
+ blkvsc_req->cmnd[1] |=
+ (blkvsc_req->req->cmd_flags & REQ_FUA) ? 0x8 : 0;
*(unsigned long long *)&blkvsc_req->cmnd[2] =
cpu_to_be64(blkvsc_req->sector_start);
@@ -839,7 +840,8 @@ static void blkvsc_init_rw(struct blkvsc_request *blkvsc_req)
blkvsc_req->cmnd[0] = READ_10;
}
- blkvsc_req->cmnd[1] |= blk_fua_rq(blkvsc_req->req) ? 0x8 : 0;
+ blkvsc_req->cmnd[1] |=
+ (blkvsc_req->req->cmd_flags & REQ_FUA) ? 0x8 : 0;
*(unsigned int *)&blkvsc_req->cmnd[2] =
cpu_to_be32(blkvsc_req->sector_start);
@@ -1286,7 +1288,7 @@ static void blkvsc_request(struct request_queue *queue)
DPRINT_DBG(BLKVSC_DRV, "- req %p\n", req);
blkdev = req->rq_disk->private_data;
- if (blkdev->shutting_down || !blk_fs_request(req) ||
+ if (blkdev->shutting_down || req->cmd_type != REQ_TYPE_FS ||
blkdev->media_not_present) {
__blk_end_request_cur(req, 0);
continue;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index d7ae241a9e55c..3ecd28ef9ba44 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -604,33 +604,20 @@ enum {
test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
#define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
-#define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS)
-#define blk_pc_request(rq) ((rq)->cmd_type == REQ_TYPE_BLOCK_PC)
-#define blk_special_request(rq) ((rq)->cmd_type == REQ_TYPE_SPECIAL)
-#define blk_sense_request(rq) ((rq)->cmd_type == REQ_TYPE_SENSE)
-
-#define blk_failfast_dev(rq) ((rq)->cmd_flags & REQ_FAILFAST_DEV)
-#define blk_failfast_transport(rq) ((rq)->cmd_flags & REQ_FAILFAST_TRANSPORT)
-#define blk_failfast_driver(rq) ((rq)->cmd_flags & REQ_FAILFAST_DRIVER)
-#define blk_noretry_request(rq) (blk_failfast_dev(rq) || \
- blk_failfast_transport(rq) || \
- blk_failfast_driver(rq))
-#define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED)
-#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT)
-#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET)
-
-#define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq)))
-
-#define blk_pm_suspend_request(rq) ((rq)->cmd_type == REQ_TYPE_PM_SUSPEND)
-#define blk_pm_resume_request(rq) ((rq)->cmd_type == REQ_TYPE_PM_RESUME)
+#define blk_noretry_request(rq) \
+ ((rq)->cmd_flags & (REQ_FAILFAST_DEV|REQ_FAILFAST_TRANSPORT| \
+ REQ_FAILFAST_DRIVER))
+
+#define blk_account_rq(rq) \
+ (((rq)->cmd_flags & REQ_STARTED) && \
+ ((rq)->cmd_type == REQ_TYPE_FS || \
+ ((rq)->cmd_flags & REQ_DISCARD)))
+
#define blk_pm_request(rq) \
- (blk_pm_suspend_request(rq) || blk_pm_resume_request(rq))
+ ((rq)->cmd_type == REQ_TYPE_PM_SUSPEND || \
+ (rq)->cmd_type == REQ_TYPE_PM_RESUME)
#define blk_rq_cpu_valid(rq) ((rq)->cpu != -1)
-#define blk_sorted_rq(rq) ((rq)->cmd_flags & REQ_SORTED)
-#define blk_barrier_rq(rq) ((rq)->cmd_flags & REQ_HARDBARRIER)
-#define blk_fua_rq(rq) ((rq)->cmd_flags & REQ_FUA)
-#define blk_discard_rq(rq) ((rq)->cmd_flags & REQ_DISCARD)
#define blk_bidi_rq(rq) ((rq)->next_rq != NULL)
/* rq->queuelist of dequeued request must be list_empty() */
#define blk_queued_rq(rq) (!list_empty(&(rq)->queuelist))
@@ -652,9 +639,6 @@ static inline bool rq_is_sync(struct request *rq)
return rw_is_sync(rq->cmd_flags);
}
-#define rq_is_meta(rq) ((rq)->cmd_flags & REQ_RW_META)
-#define rq_noidle(rq) ((rq)->cmd_flags & REQ_NOIDLE)
-
static inline int blk_queue_full(struct request_queue *q, int sync)
{
if (sync)
@@ -687,7 +671,8 @@ static inline void blk_clear_queue_full(struct request_queue *q, int sync)
(REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER)
#define rq_mergeable(rq) \
(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \
- (blk_discard_rq(rq) || blk_fs_request((rq))))
+ (((rq)->cmd_flags & REQ_DISCARD) || \
+ (rq)->cmd_type == REQ_TYPE_FS))
/*
* q->prep_rq_fn return values
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 416bf62d6d464..23faa67e80223 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -224,7 +224,7 @@ static inline int blk_trace_init_sysfs(struct device *dev)
static inline int blk_cmd_buf_len(struct request *rq)
{
- return blk_pc_request(rq) ? rq->cmd_len * 3 : 1;
+ return (rq->cmd_type == REQ_TYPE_BLOCK_PC) ? rq->cmd_len * 3 : 1;
}
extern void blk_dump_cmd(char *buf, struct request *rq);
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index d870a918559cd..d8ce278515c3c 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -25,8 +25,10 @@ DECLARE_EVENT_CLASS(block_rq_with_error,
TP_fast_assign(
__entry->dev = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
- __entry->sector = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
- __entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
+ __entry->sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ 0 : blk_rq_pos(rq);
+ __entry->nr_sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ 0 : blk_rq_sectors(rq);
__entry->errors = rq->errors;
blk_fill_rwbs_rq(__entry->rwbs, rq);
@@ -109,9 +111,12 @@ DECLARE_EVENT_CLASS(block_rq,
TP_fast_assign(
__entry->dev = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
- __entry->sector = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
- __entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
- __entry->bytes = blk_pc_request(rq) ? blk_rq_bytes(rq) : 0;
+ __entry->sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ 0 : blk_rq_pos(rq);
+ __entry->nr_sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ 0 : blk_rq_sectors(rq);
+ __entry->bytes = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+ blk_rq_bytes(rq) : 0;
blk_fill_rwbs_rq(__entry->rwbs, rq);
blk_dump_cmd(__get_str(cmd), rq);
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 638711c175048..4f149944cb89e 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -661,10 +661,10 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
if (likely(!bt))
return;
- if (blk_discard_rq(rq))
+ if (rq->cmd_flags & REQ_DISCARD)
rw |= (1 << BIO_RW_DISCARD);
- if (blk_pc_request(rq)) {
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
what |= BLK_TC_ACT(BLK_TC_PC);
__blk_add_trace(bt, 0, blk_rq_bytes(rq), rw,
what, rq->errors, rq->cmd_len, rq->cmd);
@@ -925,7 +925,7 @@ void blk_add_driver_data(struct request_queue *q,
if (likely(!bt))
return;
- if (blk_pc_request(rq))
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
__blk_add_trace(bt, 0, blk_rq_bytes(rq), 0,
BLK_TA_DRV_DATA, rq->errors, len, data);
else
@@ -1730,7 +1730,7 @@ void blk_dump_cmd(char *buf, struct request *rq)
int len = rq->cmd_len;
unsigned char *cmd = rq->cmd;
- if (!blk_pc_request(rq)) {
+ if (rq->cmd_type != REQ_TYPE_BLOCK_PC) {
buf[0] = '\0';
return;
}
@@ -1779,7 +1779,7 @@ void blk_fill_rwbs_rq(char *rwbs, struct request *rq)
int rw = rq->cmd_flags & 0x03;
int bytes;
- if (blk_discard_rq(rq))
+ if (rq->cmd_flags & REQ_DISCARD)
rw |= (1 << BIO_RW_DISCARD);
bytes = blk_rq_bytes(rq);
--
GitLab
From 7b6d91daee5cac6402186ff224c3af39d79f4a0e Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Sat, 7 Aug 2010 18:20:39 +0200
Subject: [PATCH 286/863] block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver. There were two flags in the bio that were
missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've
renamed two request flags that had a superflous RW in them.
Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-barrier.c | 2 +-
block/blk-core.c | 37 +++------
block/blk-map.c | 2 +-
block/blk-merge.c | 2 +-
block/cfq-iosched.c | 14 ++--
block/elevator.c | 3 +-
drivers/ata/libata-scsi.c | 2 +-
drivers/block/aoe/aoeblk.c | 2 +-
drivers/block/brd.c | 2 +-
drivers/block/drbd/drbd_actlog.c | 8 +-
drivers/block/drbd/drbd_main.c | 6 +-
drivers/block/drbd/drbd_receiver.c | 22 ++---
drivers/block/drbd/drbd_req.c | 2 +-
drivers/block/loop.c | 2 +-
drivers/block/pktcdvd.c | 2 +-
drivers/block/umem.c | 2 +-
drivers/ide/ide-cd_ioctl.c | 2 +-
drivers/ide/ide-floppy.c | 2 +-
drivers/md/dm-io.c | 12 +--
drivers/md/dm-kcopyd.c | 2 +-
drivers/md/dm-raid1.c | 2 +-
drivers/md/dm-stripe.c | 2 +-
drivers/md/dm.c | 14 ++--
drivers/md/linear.c | 2 +-
drivers/md/md.c | 10 +--
drivers/md/md.h | 4 +-
drivers/md/multipath.c | 8 +-
drivers/md/raid0.c | 2 +-
drivers/md/raid1.c | 22 +++--
drivers/md/raid10.c | 12 +--
drivers/md/raid5.c | 2 +-
drivers/scsi/osd/osd_initiator.c | 8 +-
fs/bio.c | 5 +-
fs/btrfs/disk-io.c | 8 +-
fs/btrfs/inode.c | 6 +-
fs/btrfs/volumes.c | 18 ++---
fs/exofs/ios.c | 2 +-
fs/gfs2/log.c | 4 +-
fs/gfs2/meta_io.c | 8 +-
fs/gfs2/ops_fstype.c | 2 +-
fs/nilfs2/segbuf.c | 2 +-
include/linux/bio.h | 125 ++++++++++++++++++-----------
include/linux/blkdev.h | 66 +--------------
include/linux/fs.h | 38 ++++-----
kernel/power/block_io.c | 2 +-
kernel/trace/blktrace.c | 27 ++++---
mm/page_io.c | 2 +-
47 files changed, 242 insertions(+), 289 deletions(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 74e404393172c..7c6f4a714687e 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -203,7 +203,7 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp)
/* initialize proxy request and queue it */
blk_rq_init(q, rq);
if (bio_data_dir(q->orig_bar_rq->bio) == WRITE)
- rq->cmd_flags |= REQ_RW;
+ rq->cmd_flags |= REQ_WRITE;
if (q->ordered & QUEUE_ORDERED_DO_FUA)
rq->cmd_flags |= REQ_FUA;
init_request_from_bio(rq, q->orig_bar_rq->bio);
diff --git a/block/blk-core.c b/block/blk-core.c
index dca43a31e7255..66c3cfe94d0ad 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1140,25 +1140,9 @@ void init_request_from_bio(struct request *req, struct bio *bio)
req->cpu = bio->bi_comp_cpu;
req->cmd_type = REQ_TYPE_FS;
- /*
- * Inherit FAILFAST from bio (for read-ahead, and explicit
- * FAILFAST). FAILFAST flags are identical for req and bio.
- */
- if (bio_rw_flagged(bio, BIO_RW_AHEAD))
+ req->cmd_flags |= bio->bi_rw & REQ_COMMON_MASK;
+ if (bio->bi_rw & REQ_RAHEAD)
req->cmd_flags |= REQ_FAILFAST_MASK;
- else
- req->cmd_flags |= bio->bi_rw & REQ_FAILFAST_MASK;
-
- if (bio_rw_flagged(bio, BIO_RW_DISCARD))
- req->cmd_flags |= REQ_DISCARD;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER))
- req->cmd_flags |= REQ_HARDBARRIER;
- if (bio_rw_flagged(bio, BIO_RW_SYNCIO))
- req->cmd_flags |= REQ_RW_SYNC;
- if (bio_rw_flagged(bio, BIO_RW_META))
- req->cmd_flags |= REQ_RW_META;
- if (bio_rw_flagged(bio, BIO_RW_NOIDLE))
- req->cmd_flags |= REQ_NOIDLE;
req->errors = 0;
req->__sector = bio->bi_sector;
@@ -1181,12 +1165,12 @@ static int __make_request(struct request_queue *q, struct bio *bio)
int el_ret;
unsigned int bytes = bio->bi_size;
const unsigned short prio = bio_prio(bio);
- const bool sync = bio_rw_flagged(bio, BIO_RW_SYNCIO);
- const bool unplug = bio_rw_flagged(bio, BIO_RW_UNPLUG);
+ const bool sync = (bio->bi_rw & REQ_SYNC);
+ const bool unplug = (bio->bi_rw & REQ_UNPLUG);
const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
int rw_flags;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER) &&
+ if ((bio->bi_rw & REQ_HARDBARRIER) &&
(q->next_ordered == QUEUE_ORDERED_NONE)) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
@@ -1200,7 +1184,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
spin_lock_irq(q->queue_lock);
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)) || elv_queue_empty(q))
+ if (unlikely((bio->bi_rw & REQ_HARDBARRIER)) || elv_queue_empty(q))
goto get_rq;
el_ret = elv_merge(q, &req, bio);
@@ -1275,7 +1259,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
*/
rw_flags = bio_data_dir(bio);
if (sync)
- rw_flags |= REQ_RW_SYNC;
+ rw_flags |= REQ_SYNC;
/*
* Grab a free request. This is might sleep but can not fail.
@@ -1464,7 +1448,7 @@ static inline void __generic_make_request(struct bio *bio)
goto end_io;
}
- if (unlikely(!bio_rw_flagged(bio, BIO_RW_DISCARD) &&
+ if (unlikely(!(bio->bi_rw & REQ_DISCARD) &&
nr_sectors > queue_max_hw_sectors(q))) {
printk(KERN_ERR "bio too big device %s (%u > %u)\n",
bdevname(bio->bi_bdev, b),
@@ -1497,8 +1481,7 @@ static inline void __generic_make_request(struct bio *bio)
if (bio_check_eod(bio, nr_sectors))
goto end_io;
- if (bio_rw_flagged(bio, BIO_RW_DISCARD) &&
- !blk_queue_discard(q)) {
+ if ((bio->bi_rw & REQ_DISCARD) && !blk_queue_discard(q)) {
err = -EOPNOTSUPP;
goto end_io;
}
@@ -2365,7 +2348,7 @@ void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
struct bio *bio)
{
/* Bit 0 (R/W) is identical in rq->cmd_flags and bio->bi_rw */
- rq->cmd_flags |= bio->bi_rw & REQ_RW;
+ rq->cmd_flags |= bio->bi_rw & REQ_WRITE;
if (bio_has_data(bio)) {
rq->nr_phys_segments = bio_phys_segments(q, bio);
diff --git a/block/blk-map.c b/block/blk-map.c
index 9083cf0180cc8..c65d7593f7f1d 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -307,7 +307,7 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
return PTR_ERR(bio);
if (rq_data_dir(rq) == WRITE)
- bio->bi_rw |= (1 << BIO_RW);
+ bio->bi_rw |= (1 << REQ_WRITE);
if (do_copy)
rq->cmd_flags |= REQ_COPY_USER;
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 87e4fb7d0e981..4852475521ea9 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -180,7 +180,7 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq,
}
if (q->dma_drain_size && q->dma_drain_needed(rq)) {
- if (rq->cmd_flags & REQ_RW)
+ if (rq->cmd_flags & REQ_WRITE)
memset(q->dma_drain_buffer, 0, q->dma_drain_size);
sg->page_link &= ~0x02;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index d4edeb8fceb8b..eb4086f7dfef9 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -458,7 +458,7 @@ static inline struct cfq_data *cic_to_cfqd(struct cfq_io_context *cic)
*/
static inline bool cfq_bio_sync(struct bio *bio)
{
- return bio_data_dir(bio) == READ || bio_rw_flagged(bio, BIO_RW_SYNCIO);
+ return bio_data_dir(bio) == READ || (bio->bi_rw & REQ_SYNC);
}
/*
@@ -646,10 +646,10 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2,
return rq1;
else if (rq_is_sync(rq2) && !rq_is_sync(rq1))
return rq2;
- if ((rq1->cmd_flags & REQ_RW_META) && !(rq2->cmd_flags & REQ_RW_META))
+ if ((rq1->cmd_flags & REQ_META) && !(rq2->cmd_flags & REQ_META))
return rq1;
- else if ((rq2->cmd_flags & REQ_RW_META) &&
- !(rq1->cmd_flags & REQ_RW_META))
+ else if ((rq2->cmd_flags & REQ_META) &&
+ !(rq1->cmd_flags & REQ_META))
return rq2;
s1 = blk_rq_pos(rq1);
@@ -1485,7 +1485,7 @@ static void cfq_remove_request(struct request *rq)
cfqq->cfqd->rq_queued--;
cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
rq_data_dir(rq), rq_is_sync(rq));
- if (rq->cmd_flags & REQ_RW_META) {
+ if (rq->cmd_flags & REQ_META) {
WARN_ON(!cfqq->meta_pending);
cfqq->meta_pending--;
}
@@ -3177,7 +3177,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
* So both queues are sync. Let the new request get disk time if
* it's a metadata request and the current queue is doing regular IO.
*/
- if ((rq->cmd_flags & REQ_RW_META) && !cfqq->meta_pending)
+ if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending)
return true;
/*
@@ -3231,7 +3231,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct cfq_io_context *cic = RQ_CIC(rq);
cfqd->rq_queued++;
- if (rq->cmd_flags & REQ_RW_META)
+ if (rq->cmd_flags & REQ_META)
cfqq->meta_pending++;
cfq_update_io_thinktime(cfqd, cic);
diff --git a/block/elevator.c b/block/elevator.c
index aa99b59c03d67..816a7c8d63942 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -79,8 +79,7 @@ int elv_rq_merge_ok(struct request *rq, struct bio *bio)
/*
* Don't merge file system requests and discard requests
*/
- if (bio_rw_flagged(bio, BIO_RW_DISCARD) !=
- bio_rw_flagged(rq->bio, BIO_RW_DISCARD))
+ if ((bio->bi_rw & REQ_DISCARD) != (rq->bio->bi_rw & REQ_DISCARD))
return 0;
/*
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a5c08b082edbe..0a8cd34847915 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1114,7 +1114,7 @@ static int atapi_drain_needed(struct request *rq)
if (likely(rq->cmd_type != REQ_TYPE_BLOCK_PC))
return 0;
- if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW))
+ if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_WRITE))
return 0;
return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 035cefe4045ae..65deffde60aca 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -173,7 +173,7 @@ aoeblk_make_request(struct request_queue *q, struct bio *bio)
BUG();
bio_endio(bio, -ENXIO);
return 0;
- } else if (bio_rw_flagged(bio, BIO_RW_BARRIER)) {
+ } else if (bio->bi_rw & REQ_HARDBARRIER) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
} else if (bio->bi_io_vec == NULL) {
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index f1bf79d9bc0a1..1b218c6b68205 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -340,7 +340,7 @@ static int brd_make_request(struct request_queue *q, struct bio *bio)
get_capacity(bdev->bd_disk))
goto out;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_DISCARD))) {
+ if (unlikely(bio->bi_rw & REQ_DISCARD)) {
err = 0;
discard_from_brd(brd, sector, bio->bi_size);
goto out;
diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c
index df018990c4225..9400845d602e0 100644
--- a/drivers/block/drbd/drbd_actlog.c
+++ b/drivers/block/drbd/drbd_actlog.c
@@ -79,8 +79,8 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
md_io.error = 0;
if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags))
- rw |= (1 << BIO_RW_BARRIER);
- rw |= ((1<<BIO_RW_UNPLUG) | (1<<BIO_RW_SYNCIO));
+ rw |= REQ_HARDBARRIER;
+ rw |= REQ_UNPLUG | REQ_SYNC;
retry:
bio = bio_alloc(GFP_NOIO, 1);
@@ -103,11 +103,11 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
/* check for unsupported barrier op.
* would rather check on EOPNOTSUPP, but that is not reliable.
* don't try again for ANY return value != 0 */
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER) && !ok)) {
+ if (unlikely((bio->bi_rw & REQ_HARDBARRIER) && !ok)) {
/* Try again with no barrier */
dev_warn(DEV, "Barriers not supported on meta data device - disabling\n");
set_bit(MD_NO_BARRIER, &mdev->flags);
- rw &= ~(1 << BIO_RW_BARRIER);
+ rw &= ~REQ_HARDBARRIER;
bio_put(bio);
goto retry;
}
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 7258c95e895e3..e2ab13d99d695 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2425,15 +2425,15 @@ int drbd_send_dblock(struct drbd_conf *mdev, struct drbd_request *req)
/* NOTE: no need to check if barriers supported here as we would
* not pass the test in make_request_common in that case
*/
- if (bio_rw_flagged(req->master_bio, BIO_RW_BARRIER)) {
+ if (req->master_bio->bi_rw & REQ_HARDBARRIER) {
dev_err(DEV, "ASSERT FAILED would have set DP_HARDBARRIER\n");
/* dp_flags |= DP_HARDBARRIER; */
}
- if (bio_rw_flagged(req->master_bio, BIO_RW_SYNCIO))
+ if (req->master_bio->bi_rw & REQ_SYNC)
dp_flags |= DP_RW_SYNC;
/* for now handle SYNCIO and UNPLUG
* as if they still were one and the same flag */
- if (bio_rw_flagged(req->master_bio, BIO_RW_UNPLUG))
+ if (req->master_bio->bi_rw & REQ_UNPLUG)
dp_flags |= DP_RW_SYNC;
if (mdev->state.conn >= C_SYNC_SOURCE &&
mdev->state.conn <= C_PAUSED_SYNC_T)
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index dff48701b84d8..cba1deb7b2711 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1180,7 +1180,7 @@ int drbd_submit_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e,
bio->bi_sector = sector;
bio->bi_bdev = mdev->ldev->backing_bdev;
/* we special case some flags in the multi-bio case, see below
- * (BIO_RW_UNPLUG, BIO_RW_BARRIER) */
+ * (REQ_UNPLUG, REQ_HARDBARRIER) */
bio->bi_rw = rw;
bio->bi_private = e;
bio->bi_end_io = drbd_endio_sec;
@@ -1209,16 +1209,16 @@ int drbd_submit_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e,
bios = bios->bi_next;
bio->bi_next = NULL;
- /* strip off BIO_RW_UNPLUG unless it is the last bio */
+ /* strip off REQ_UNPLUG unless it is the last bio */
if (bios)
- bio->bi_rw &= ~(1<<BIO_RW_UNPLUG);
+ bio->bi_rw &= ~REQ_UNPLUG;
drbd_generic_make_request(mdev, fault_type, bio);
- /* strip off BIO_RW_BARRIER,
+ /* strip off REQ_HARDBARRIER,
* unless it is the first or last bio */
if (bios && bios->bi_next)
- bios->bi_rw &= ~(1<<BIO_RW_BARRIER);
+ bios->bi_rw &= ~REQ_HARDBARRIER;
} while (bios);
maybe_kick_lo(mdev);
return 0;
@@ -1233,7 +1233,7 @@ int drbd_submit_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e,
}
/**
- * w_e_reissue() - Worker callback; Resubmit a bio, without BIO_RW_BARRIER set
+ * w_e_reissue() - Worker callback; Resubmit a bio, without REQ_HARDBARRIER set
* @mdev: DRBD device.
* @w: work object.
* @cancel: The connection will be closed anyways (unused in this callback)
@@ -1245,7 +1245,7 @@ int w_e_reissue(struct drbd_conf *mdev, struct drbd_work *w, int cancel) __relea
(and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch)
so that we can finish that epoch in drbd_may_finish_epoch().
That is necessary if we already have a long chain of Epochs, before
- we realize that BIO_RW_BARRIER is actually not supported */
+ we realize that REQ_HARDBARRIER is actually not supported */
/* As long as the -ENOTSUPP on the barrier is reported immediately
that will never trigger. If it is reported late, we will just
@@ -1824,14 +1824,14 @@ static int receive_Data(struct drbd_conf *mdev, struct p_header *h)
epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list);
if (epoch == e->epoch) {
set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
- rw |= (1<<BIO_RW_BARRIER);
+ rw |= REQ_HARDBARRIER;
e->flags |= EE_IS_BARRIER;
} else {
if (atomic_read(&epoch->epoch_size) > 1 ||
!test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) {
set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
- rw |= (1<<BIO_RW_BARRIER);
+ rw |= REQ_HARDBARRIER;
e->flags |= EE_IS_BARRIER;
}
}
@@ -1841,10 +1841,10 @@ static int receive_Data(struct drbd_conf *mdev, struct p_header *h)
dp_flags = be32_to_cpu(p->dp_flags);
if (dp_flags & DP_HARDBARRIER) {
dev_err(DEV, "ASSERT FAILED would have submitted barrier request\n");
- /* rw |= (1<<BIO_RW_BARRIER); */
+ /* rw |= REQ_HARDBARRIER; */
}
if (dp_flags & DP_RW_SYNC)
- rw |= (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
if (dp_flags & DP_MAY_SET_IN_SYNC)
e->flags |= EE_MAY_SET_IN_SYNC;
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 654f1ef5cbb0f..f761d98a4e903 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -997,7 +997,7 @@ int drbd_make_request_26(struct request_queue *q, struct bio *bio)
* because of those XXX, this is not yet enabled,
* i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit.
*/
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags)) {
/* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */
bio_endio(bio, -EOPNOTSUPP);
return 0;
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 6120922f459f3..fedfdb7d3cdfa 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -476,7 +476,7 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
pos = ((loff_t) bio->bi_sector << 9) + lo->lo_offset;
if (bio_rw(bio) == WRITE) {
- bool barrier = bio_rw_flagged(bio, BIO_RW_BARRIER);
+ bool barrier = (bio->bi_rw & REQ_HARDBARRIER);
struct file *file = lo->lo_backing_file;
if (barrier) {
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 8a549db2aa785..9f3e4454274b6 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -1221,7 +1221,7 @@ static int pkt_start_recovery(struct packet_data *pkt)
pkt->bio->bi_flags = 1 << BIO_UPTODATE;
pkt->bio->bi_idx = 0;
- BUG_ON(pkt->bio->bi_rw != (1 << BIO_RW));
+ BUG_ON(pkt->bio->bi_rw != REQ_WRITE);
BUG_ON(pkt->bio->bi_vcnt != pkt->frames);
BUG_ON(pkt->bio->bi_size != pkt->frames * CD_FRAMESIZE);
BUG_ON(pkt->bio->bi_end_io != pkt_end_io_packet_write);
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index 2f9470ff8f7ce..8be57151f5d65 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -478,7 +478,7 @@ static void process_page(unsigned long data)
le32_to_cpu(desc->local_addr)>>9,
le32_to_cpu(desc->transfer_size));
dump_dmastat(card, control);
- } else if (test_bit(BIO_RW, &bio->bi_rw) &&
+ } else if ((bio->bi_rw & REQ_WRITE) &&
le32_to_cpu(desc->local_addr) >> 9 ==
card->init_size) {
card->init_size += le32_to_cpu(desc->transfer_size) >> 9;
diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c
index 02712bf045c1b..766b3deeb23c7 100644
--- a/drivers/ide/ide-cd_ioctl.c
+++ b/drivers/ide/ide-cd_ioctl.c
@@ -454,7 +454,7 @@ int ide_cdrom_packet(struct cdrom_device_info *cdi,
touch it at all. */
if (cgc->data_direction == CGC_DATA_WRITE)
- flags |= REQ_RW;
+ flags |= REQ_WRITE;
if (cgc->sense)
memset(cgc->sense, 0, sizeof(struct request_sense));
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index c7d0737bb18a9..5406b6ea3ad1d 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -207,7 +207,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
memcpy(rq->cmd, pc->c, 12);
pc->rq = rq;
- if (rq->cmd_flags & REQ_RW)
+ if (rq->cmd_flags & REQ_WRITE)
pc->flags |= PC_FLAG_WRITING;
pc->flags |= PC_FLAG_DMA_OK;
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index 10f457ca6af25..0590c75b0ab68 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -356,7 +356,7 @@ static void dispatch_io(int rw, unsigned int num_regions,
BUG_ON(num_regions > DM_IO_MAX_REGIONS);
if (sync)
- rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
/*
* For multiple regions we need to be careful to rewind
@@ -364,7 +364,7 @@ static void dispatch_io(int rw, unsigned int num_regions,
*/
for (i = 0; i < num_regions; i++) {
*dp = old_pages;
- if (where[i].count || (rw & (1 << BIO_RW_BARRIER)))
+ if (where[i].count || (rw & REQ_HARDBARRIER))
do_region(rw, i, where + i, dp, io);
}
@@ -412,8 +412,8 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions,
}
set_current_state(TASK_RUNNING);
- if (io->eopnotsupp_bits && (rw & (1 << BIO_RW_BARRIER))) {
- rw &= ~(1 << BIO_RW_BARRIER);
+ if (io->eopnotsupp_bits && (rw & REQ_HARDBARRIER)) {
+ rw &= ~REQ_HARDBARRIER;
goto retry;
}
@@ -479,8 +479,8 @@ static int dp_init(struct dm_io_request *io_req, struct dpages *dp)
* New collapsed (a)synchronous interface.
*
* If the IO is asynchronous (i.e. it has notify.fn), you must either unplug
- * the queue with blk_unplug() some time later or set the BIO_RW_SYNC bit in
- * io_req->bi_rw. If you fail to do one of these, the IO will be submitted to
+ * the queue with blk_unplug() some time later or set REQ_SYNC in
+io_req->bi_rw. If you fail to do one of these, the IO will be submitted to
* the disk after q->unplug_delay, which defaults to 3ms in blk-settings.c.
*/
int dm_io(struct dm_io_request *io_req, unsigned num_regions,
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index addf83475040d..d8587bac5682f 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -345,7 +345,7 @@ static int run_io_job(struct kcopyd_job *job)
{
int r;
struct dm_io_request io_req = {
- .bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG),
+ .bi_rw = job->rw | REQ_SYNC | REQ_UNPLUG,
.mem.type = DM_IO_PAGE_LIST,
.mem.ptr.pl = job->pages,
.mem.offset = job->offset,
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index ddda531723dce..74136262d6542 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -1211,7 +1211,7 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio,
if (error == -EOPNOTSUPP)
goto out;
- if ((error == -EWOULDBLOCK) && bio_rw_flagged(bio, BIO_RW_AHEAD))
+ if ((error == -EWOULDBLOCK) && (bio->bi_rw & REQ_RAHEAD))
goto out;
if (unlikely(error)) {
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index e610725db766f..d6e28d732b4d7 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -284,7 +284,7 @@ static int stripe_end_io(struct dm_target *ti, struct bio *bio,
if (!error)
return 0; /* I/O complete */
- if ((error == -EWOULDBLOCK) && bio_rw_flagged(bio, BIO_RW_AHEAD))
+ if ((error == -EWOULDBLOCK) && (bio->bi_rw & REQ_RAHEAD))
return error;
if (error == -EOPNOTSUPP)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 1e0e6dd515010..d6f77baeafd60 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -614,7 +614,7 @@ static void dec_pending(struct dm_io *io, int error)
*/
spin_lock_irqsave(&md->deferred_lock, flags);
if (__noflush_suspending(md)) {
- if (!bio_rw_flagged(io->bio, BIO_RW_BARRIER))
+ if (!(io->bio->bi_rw & REQ_HARDBARRIER))
bio_list_add_head(&md->deferred,
io->bio);
} else
@@ -626,7 +626,7 @@ static void dec_pending(struct dm_io *io, int error)
io_error = io->error;
bio = io->bio;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER)) {
+ if (bio->bi_rw & REQ_HARDBARRIER) {
/*
* There can be just one barrier request so we use
* a per-device variable for error reporting.
@@ -1106,7 +1106,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector,
clone->bi_sector = sector;
clone->bi_bdev = bio->bi_bdev;
- clone->bi_rw = bio->bi_rw & ~(1 << BIO_RW_BARRIER);
+ clone->bi_rw = bio->bi_rw & ~REQ_HARDBARRIER;
clone->bi_vcnt = 1;
clone->bi_size = to_bytes(len);
clone->bi_io_vec->bv_offset = offset;
@@ -1133,7 +1133,7 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector,
clone = bio_alloc_bioset(GFP_NOIO, bio->bi_max_vecs, bs);
__bio_clone(clone, bio);
- clone->bi_rw &= ~(1 << BIO_RW_BARRIER);
+ clone->bi_rw &= ~REQ_HARDBARRIER;
clone->bi_destructor = dm_bio_destructor;
clone->bi_sector = sector;
clone->bi_idx = idx;
@@ -1301,7 +1301,7 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio)
ci.map = dm_get_live_table(md);
if (unlikely(!ci.map)) {
- if (!bio_rw_flagged(bio, BIO_RW_BARRIER))
+ if (!(bio->bi_rw & REQ_HARDBARRIER))
bio_io_error(bio);
else
if (!md->barrier_error)
@@ -1414,7 +1414,7 @@ static int _dm_request(struct request_queue *q, struct bio *bio)
* we have to queue this io for later.
*/
if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) ||
- unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
up_read(&md->io_lock);
if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) &&
@@ -2296,7 +2296,7 @@ static void dm_wq_work(struct work_struct *work)
if (dm_request_based(md))
generic_make_request(c);
else {
- if (bio_rw_flagged(c, BIO_RW_BARRIER))
+ if (c->bi_rw & REQ_HARDBARRIER)
process_barrier(md, c);
else
__split_and_process_bio(md, c);
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 7e0e057db9a70..ba19060bcf3f7 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -294,7 +294,7 @@ static int linear_make_request (mddev_t *mddev, struct bio *bio)
dev_info_t *tmp_dev;
sector_t start_sector;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
md_barrier_request(mddev, bio);
return 0;
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index cb20d0b0555ad..1893af6787790 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -353,7 +353,7 @@ static void md_submit_barrier(struct work_struct *ws)
/* an empty barrier - all done */
bio_endio(bio, 0);
else {
- bio->bi_rw &= ~(1<<BIO_RW_BARRIER);
+ bio->bi_rw &= ~REQ_HARDBARRIER;
if (mddev->pers->make_request(mddev, bio))
generic_make_request(bio);
mddev->barrier = POST_REQUEST_BARRIER;
@@ -675,11 +675,11 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev,
* if zero is reached.
* If an error occurred, call md_error
*
- * As we might need to resubmit the request if BIO_RW_BARRIER
+ * As we might need to resubmit the request if REQ_HARDBARRIER
* causes ENOTSUPP, we allocate a spare bio...
*/
struct bio *bio = bio_alloc(GFP_NOIO, 1);
- int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
+ int rw = REQ_WRITE | REQ_SYNC | REQ_UNPLUG;
bio->bi_bdev = rdev->bdev;
bio->bi_sector = sector;
@@ -691,7 +691,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev,
atomic_inc(&mddev->pending_writes);
if (!test_bit(BarriersNotsupp, &rdev->flags)) {
struct bio *rbio;
- rw |= (1<<BIO_RW_BARRIER);
+ rw |= REQ_HARDBARRIER;
rbio = bio_clone(bio, GFP_NOIO);
rbio->bi_private = bio;
rbio->bi_end_io = super_written_barrier;
@@ -736,7 +736,7 @@ int sync_page_io(struct block_device *bdev, sector_t sector, int size,
struct completion event;
int ret;
- rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
bio->bi_bdev = bdev;
bio->bi_sector = sector;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 10597bfec0001..fc56e0f21c80a 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -67,7 +67,7 @@ struct mdk_rdev_s
#define Faulty 1 /* device is known to have a fault */
#define In_sync 2 /* device is in_sync with rest of array */
#define WriteMostly 4 /* Avoid reading if at all possible */
-#define BarriersNotsupp 5 /* BIO_RW_BARRIER is not supported */
+#define BarriersNotsupp 5 /* REQ_HARDBARRIER is not supported */
#define AllReserved 6 /* If whole device is reserved for
* one array */
#define AutoDetected 7 /* added by auto-detect */
@@ -254,7 +254,7 @@ struct mddev_s
* fails. Only supported
*/
struct bio *biolist; /* bios that need to be retried
- * because BIO_RW_BARRIER is not supported
+ * because REQ_HARDBARRIER is not supported
*/
atomic_t recovery_active; /* blocks scheduled, but not written */
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 410fb60699ac1..0307d217e7a4c 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -91,7 +91,7 @@ static void multipath_end_request(struct bio *bio, int error)
if (uptodate)
multipath_end_bh_io(mp_bh, 0);
- else if (!bio_rw_flagged(bio, BIO_RW_AHEAD)) {
+ else if (!(bio->bi_rw & REQ_RAHEAD)) {
/*
* oops, IO error:
*/
@@ -142,7 +142,7 @@ static int multipath_make_request(mddev_t *mddev, struct bio * bio)
struct multipath_bh * mp_bh;
struct multipath_info *multipath;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
md_barrier_request(mddev, bio);
return 0;
}
@@ -163,7 +163,7 @@ static int multipath_make_request(mddev_t *mddev, struct bio * bio)
mp_bh->bio = *bio;
mp_bh->bio.bi_sector += multipath->rdev->data_offset;
mp_bh->bio.bi_bdev = multipath->rdev->bdev;
- mp_bh->bio.bi_rw |= (1 << BIO_RW_FAILFAST_TRANSPORT);
+ mp_bh->bio.bi_rw |= REQ_FAILFAST_TRANSPORT;
mp_bh->bio.bi_end_io = multipath_end_request;
mp_bh->bio.bi_private = mp_bh;
generic_make_request(&mp_bh->bio);
@@ -398,7 +398,7 @@ static void multipathd (mddev_t *mddev)
*bio = *(mp_bh->master_bio);
bio->bi_sector += conf->multipaths[mp_bh->path].rdev->data_offset;
bio->bi_bdev = conf->multipaths[mp_bh->path].rdev->bdev;
- bio->bi_rw |= (1 << BIO_RW_FAILFAST_TRANSPORT);
+ bio->bi_rw |= REQ_FAILFAST_TRANSPORT;
bio->bi_end_io = multipath_end_request;
bio->bi_private = mp_bh;
generic_make_request(bio);
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 563abed5a2cb7..6f7af46d623c9 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -483,7 +483,7 @@ static int raid0_make_request(mddev_t *mddev, struct bio *bio)
struct strip_zone *zone;
mdk_rdev_t *tmp_dev;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
md_barrier_request(mddev, bio);
return 0;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a948da8012de2..73cc74ffc26bd 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -787,7 +787,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
struct bio_list bl;
struct page **behind_pages = NULL;
const int rw = bio_data_dir(bio);
- const bool do_sync = bio_rw_flagged(bio, BIO_RW_SYNCIO);
+ const bool do_sync = (bio->bi_rw & REQ_SYNC);
bool do_barriers;
mdk_rdev_t *blocked_rdev;
@@ -822,7 +822,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
finish_wait(&conf->wait_barrier, &w);
}
if (unlikely(!mddev->barriers_work &&
- bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ (bio->bi_rw & REQ_HARDBARRIER))) {
if (rw == WRITE)
md_write_end(mddev);
bio_endio(bio, -EOPNOTSUPP);
@@ -877,7 +877,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
read_bio->bi_sector = r1_bio->sector + mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid1_end_read_request;
- read_bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r1_bio;
generic_make_request(read_bio);
@@ -959,7 +959,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
atomic_set(&r1_bio->remaining, 0);
atomic_set(&r1_bio->behind_remaining, 0);
- do_barriers = bio_rw_flagged(bio, BIO_RW_BARRIER);
+ do_barriers = bio->bi_rw & REQ_HARDBARRIER;
if (do_barriers)
set_bit(R1BIO_Barrier, &r1_bio->state);
@@ -975,8 +975,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
- mbio->bi_rw = WRITE | (do_barriers << BIO_RW_BARRIER) |
- (do_sync << BIO_RW_SYNCIO);
+ mbio->bi_rw = WRITE | do_barriers | do_sync;
mbio->bi_private = r1_bio;
if (behind_pages) {
@@ -1633,7 +1632,7 @@ static void raid1d(mddev_t *mddev)
sync_request_write(mddev, r1_bio);
unplug = 1;
} else if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
- /* some requests in the r1bio were BIO_RW_BARRIER
+ /* some requests in the r1bio were REQ_HARDBARRIER
* requests which failed with -EOPNOTSUPP. Hohumm..
* Better resubmit without the barrier.
* We know which devices to resubmit for, because
@@ -1641,7 +1640,7 @@ static void raid1d(mddev_t *mddev)
* We already have a nr_pending reference on these rdevs.
*/
int i;
- const bool do_sync = bio_rw_flagged(r1_bio->master_bio, BIO_RW_SYNCIO);
+ const bool do_sync = (r1_bio->master_bio->bi_rw & REQ_SYNC);
clear_bit(R1BIO_BarrierRetry, &r1_bio->state);
clear_bit(R1BIO_Barrier, &r1_bio->state);
for (i=0; i < conf->raid_disks; i++)
@@ -1662,8 +1661,7 @@ static void raid1d(mddev_t *mddev)
conf->mirrors[i].rdev->data_offset;
bio->bi_bdev = conf->mirrors[i].rdev->bdev;
bio->bi_end_io = raid1_end_write_request;
- bio->bi_rw = WRITE |
- (do_sync << BIO_RW_SYNCIO);
+ bio->bi_rw = WRITE | do_sync;
bio->bi_private = r1_bio;
r1_bio->bios[i] = bio;
generic_make_request(bio);
@@ -1698,7 +1696,7 @@ static void raid1d(mddev_t *mddev)
(unsigned long long)r1_bio->sector);
raid_end_bio_io(r1_bio);
} else {
- const bool do_sync = bio_rw_flagged(r1_bio->master_bio, BIO_RW_SYNCIO);
+ const bool do_sync = r1_bio->master_bio->bi_rw & REQ_SYNC;
r1_bio->bios[r1_bio->read_disk] =
mddev->ro ? IO_BLOCKED : NULL;
r1_bio->read_disk = disk;
@@ -1715,7 +1713,7 @@ static void raid1d(mddev_t *mddev)
bio->bi_sector = r1_bio->sector + rdev->data_offset;
bio->bi_bdev = rdev->bdev;
bio->bi_end_io = raid1_end_read_request;
- bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r1_bio;
unplug = 1;
generic_make_request(bio);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 42e64e4e5e250..62ecb6650fd02 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -799,12 +799,12 @@ static int make_request(mddev_t *mddev, struct bio * bio)
int i;
int chunk_sects = conf->chunk_mask + 1;
const int rw = bio_data_dir(bio);
- const bool do_sync = bio_rw_flagged(bio, BIO_RW_SYNCIO);
+ const bool do_sync = (bio->bi_rw & REQ_SYNC);
struct bio_list bl;
unsigned long flags;
mdk_rdev_t *blocked_rdev;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
+ if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) {
md_barrier_request(mddev, bio);
return 0;
}
@@ -879,7 +879,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid10_end_read_request;
- read_bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r10_bio;
generic_make_request(read_bio);
@@ -947,7 +947,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
conf->mirrors[d].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | (do_sync << BIO_RW_SYNCIO);
+ mbio->bi_rw = WRITE | do_sync;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
@@ -1716,7 +1716,7 @@ static void raid10d(mddev_t *mddev)
raid_end_bio_io(r10_bio);
bio_put(bio);
} else {
- const bool do_sync = bio_rw_flagged(r10_bio->master_bio, BIO_RW_SYNCIO);
+ const bool do_sync = (r10_bio->master_bio->bi_rw & REQ_SYNC);
bio_put(bio);
rdev = conf->mirrors[mirror].rdev;
if (printk_ratelimit())
@@ -1730,7 +1730,7 @@ static void raid10d(mddev_t *mddev)
bio->bi_sector = r10_bio->devs[r10_bio->read_slot].addr
+ rdev->data_offset;
bio->bi_bdev = rdev->bdev;
- bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r10_bio;
bio->bi_end_io = raid10_end_read_request;
unplug = 1;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 96c690279fc6b..20ac2f14376a1 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3958,7 +3958,7 @@ static int make_request(mddev_t *mddev, struct bio * bi)
const int rw = bio_data_dir(bi);
int remaining;
- if (unlikely(bio_rw_flagged(bi, BIO_RW_BARRIER))) {
+ if (unlikely(bi->bi_rw & REQ_HARDBARRIER)) {
/* Drain all pending writes. We only really need
* to ensure they have been submitted, but this is
* easier.
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index ee4b6914667f9..fda4de3440c46 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -716,7 +716,7 @@ static int _osd_req_list_objects(struct osd_request *or,
return PTR_ERR(bio);
}
- bio->bi_rw &= ~(1 << BIO_RW);
+ bio->bi_rw &= ~REQ_WRITE;
or->in.bio = bio;
or->in.total_bytes = bio->bi_size;
return 0;
@@ -814,7 +814,7 @@ void osd_req_write(struct osd_request *or,
{
_osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, len);
WARN_ON(or->out.bio || or->out.total_bytes);
- WARN_ON(0 == bio_rw_flagged(bio, BIO_RW));
+ WARN_ON(0 == (bio->bi_rw & REQ_WRITE));
or->out.bio = bio;
or->out.total_bytes = len;
}
@@ -829,7 +829,7 @@ int osd_req_write_kern(struct osd_request *or,
if (IS_ERR(bio))
return PTR_ERR(bio);
- bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+ bio->bi_rw |= REQ_WRITE; /* FIXME: bio_set_dir() */
osd_req_write(or, obj, offset, bio, len);
return 0;
}
@@ -865,7 +865,7 @@ void osd_req_read(struct osd_request *or,
{
_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, len);
WARN_ON(or->in.bio || or->in.total_bytes);
- WARN_ON(1 == bio_rw_flagged(bio, BIO_RW));
+ WARN_ON(1 == (bio->bi_rw & REQ_WRITE));
or->in.bio = bio;
or->in.total_bytes = len;
}
diff --git a/fs/bio.c b/fs/bio.c
index e7bf6ca64dcf0..8abb2dfb2e7c8 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -843,7 +843,8 @@ struct bio *bio_copy_user_iov(struct request_queue *q,
if (!bio)
goto out_bmd;
- bio->bi_rw |= (!write_to_vm << BIO_RW);
+ if (!write_to_vm)
+ bio->bi_rw |= REQ_WRITE;
ret = 0;
@@ -1024,7 +1025,7 @@ static struct bio *__bio_map_user_iov(struct request_queue *q,
* set data direction, and check if mapped pages need bouncing
*/
if (!write_to_vm)
- bio->bi_rw |= (1 << BIO_RW);
+ bio->bi_rw |= REQ_WRITE;
bio->bi_bdev = bdev;
bio->bi_flags |= (1 << BIO_USER_MAPPED);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 34f7c375567e3..64f10082f0484 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -480,7 +480,7 @@ static void end_workqueue_bio(struct bio *bio, int err)
end_io_wq->work.func = end_workqueue_fn;
end_io_wq->work.flags = 0;
- if (bio->bi_rw & (1 << BIO_RW)) {
+ if (bio->bi_rw & REQ_WRITE) {
if (end_io_wq->metadata)
btrfs_queue_worker(&fs_info->endio_meta_write_workers,
&end_io_wq->work);
@@ -604,7 +604,7 @@ int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode,
atomic_inc(&fs_info->nr_async_submits);
- if (rw & (1 << BIO_RW_SYNCIO))
+ if (rw & REQ_SYNC)
btrfs_set_work_high_prio(&async->work);
btrfs_queue_worker(&fs_info->workers, &async->work);
@@ -668,7 +668,7 @@ static int btree_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
bio, 1);
BUG_ON(ret);
- if (!(rw & (1 << BIO_RW))) {
+ if (!(rw & REQ_WRITE)) {
/*
* called for a read, do the setup so that checksum validation
* can happen in the async kernel threads
@@ -1427,7 +1427,7 @@ static void end_workqueue_fn(struct btrfs_work *work)
* ram and up to date before trying to verify things. For
* blocksize <= pagesize, it is basically a noop
*/
- if (!(bio->bi_rw & (1 << BIO_RW)) && end_io_wq->metadata &&
+ if (!(bio->bi_rw & REQ_WRITE) && end_io_wq->metadata &&
!bio_ready_for_csum(bio)) {
btrfs_queue_worker(&fs_info->endio_meta_workers,
&end_io_wq->work);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 1bff92ad47443..e975d7180a882 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1429,7 +1429,7 @@ static int btrfs_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
BUG_ON(ret);
- if (!(rw & (1 << BIO_RW))) {
+ if (!(rw & REQ_WRITE)) {
if (bio_flags & EXTENT_BIO_COMPRESSED) {
return btrfs_submit_compressed_read(inode, bio,
mirror_num, bio_flags);
@@ -1841,7 +1841,7 @@ static int btrfs_io_failed_hook(struct bio *failed_bio,
bio->bi_size = 0;
bio_add_page(bio, page, failrec->len, start - page_offset(page));
- if (failed_bio->bi_rw & (1 << BIO_RW))
+ if (failed_bio->bi_rw & REQ_WRITE)
rw = WRITE;
else
rw = READ;
@@ -5642,7 +5642,7 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
struct bio_vec *bvec = bio->bi_io_vec;
u64 start;
int skip_sum;
- int write = rw & (1 << BIO_RW);
+ int write = rw & REQ_WRITE;
int ret = 0;
skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index d6e3af8be95b9..dd318ff280b22 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -258,7 +258,7 @@ static noinline int run_scheduled_bios(struct btrfs_device *device)
BUG_ON(atomic_read(&cur->bi_cnt) == 0);
- if (bio_rw_flagged(cur, BIO_RW_SYNCIO))
+ if (cur->bi_rw & REQ_SYNC)
num_sync_run++;
submit_bio(cur->bi_rw, cur);
@@ -2651,7 +2651,7 @@ static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
int max_errors = 0;
struct btrfs_multi_bio *multi = NULL;
- if (multi_ret && !(rw & (1 << BIO_RW)))
+ if (multi_ret && !(rw & REQ_WRITE))
stripes_allocated = 1;
again:
if (multi_ret) {
@@ -2687,7 +2687,7 @@ static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
mirror_num = 0;
/* if our multi bio struct is too small, back off and try again */
- if (rw & (1 << BIO_RW)) {
+ if (rw & REQ_WRITE) {
if (map->type & (BTRFS_BLOCK_GROUP_RAID1 |
BTRFS_BLOCK_GROUP_DUP)) {
stripes_required = map->num_stripes;
@@ -2697,7 +2697,7 @@ static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
max_errors = 1;
}
}
- if (multi_ret && (rw & (1 << BIO_RW)) &&
+ if (multi_ret && (rw & REQ_WRITE) &&
stripes_allocated < stripes_required) {
stripes_allocated = map->num_stripes;
free_extent_map(em);
@@ -2733,7 +2733,7 @@ static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
num_stripes = 1;
stripe_index = 0;
if (map->type & BTRFS_BLOCK_GROUP_RAID1) {
- if (unplug_page || (rw & (1 << BIO_RW)))
+ if (unplug_page || (rw & REQ_WRITE))
num_stripes = map->num_stripes;
else if (mirror_num)
stripe_index = mirror_num - 1;
@@ -2744,7 +2744,7 @@ static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
}
} else if (map->type & BTRFS_BLOCK_GROUP_DUP) {
- if (rw & (1 << BIO_RW))
+ if (rw & REQ_WRITE)
num_stripes = map->num_stripes;
else if (mirror_num)
stripe_index = mirror_num - 1;
@@ -2755,7 +2755,7 @@ static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
stripe_index = do_div(stripe_nr, factor);
stripe_index *= map->sub_stripes;
- if (unplug_page || (rw & (1 << BIO_RW)))
+ if (unplug_page || (rw & REQ_WRITE))
num_stripes = map->sub_stripes;
else if (mirror_num)
stripe_index += mirror_num - 1;
@@ -2945,7 +2945,7 @@ static noinline int schedule_bio(struct btrfs_root *root,
struct btrfs_pending_bios *pending_bios;
/* don't bother with additional async steps for reads, right now */
- if (!(rw & (1 << BIO_RW))) {
+ if (!(rw & REQ_WRITE)) {
bio_get(bio);
submit_bio(rw, bio);
bio_put(bio);
@@ -2964,7 +2964,7 @@ static noinline int schedule_bio(struct btrfs_root *root,
bio->bi_rw |= rw;
spin_lock(&device->io_lock);
- if (bio_rw_flagged(bio, BIO_RW_SYNCIO))
+ if (bio->bi_rw & REQ_SYNC)
pending_bios = &device->pending_sync_bios;
else
pending_bios = &device->pending_bios;
diff --git a/fs/exofs/ios.c b/fs/exofs/ios.c
index 4337cad7777b1..e2732203fa937 100644
--- a/fs/exofs/ios.c
+++ b/fs/exofs/ios.c
@@ -599,7 +599,7 @@ static int _sbi_write_mirror(struct exofs_io_state *ios, int cur_comp)
} else {
bio = master_dev->bio;
/* FIXME: bio_set_dir() */
- bio->bi_rw |= (1 << BIO_RW);
+ bio->bi_rw |= REQ_WRITE;
}
osd_req_write(or, &ios->obj, per_dev->offset, bio,
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index efc3539ac5a1f..cde1248a62255 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -595,7 +595,7 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull)
if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags))
goto skip_barrier;
get_bh(bh);
- submit_bh(WRITE_BARRIER | (1 << BIO_RW_META), bh);
+ submit_bh(WRITE_BARRIER | REQ_META, bh);
wait_on_buffer(bh);
if (buffer_eopnotsupp(bh)) {
clear_buffer_eopnotsupp(bh);
@@ -605,7 +605,7 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull)
lock_buffer(bh);
skip_barrier:
get_bh(bh);
- submit_bh(WRITE_SYNC | (1 << BIO_RW_META), bh);
+ submit_bh(WRITE_SYNC | REQ_META, bh);
wait_on_buffer(bh);
}
if (!buffer_uptodate(bh))
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 18176d0b75d77..f3b071f921aa6 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -36,8 +36,8 @@ static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wb
{
struct buffer_head *bh, *head;
int nr_underway = 0;
- int write_op = (1 << BIO_RW_META) | ((wbc->sync_mode == WB_SYNC_ALL ?
- WRITE_SYNC_PLUG : WRITE));
+ int write_op = REQ_META |
+ (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC_PLUG : WRITE);
BUG_ON(!PageLocked(page));
BUG_ON(!page_has_buffers(page));
@@ -225,7 +225,7 @@ int gfs2_meta_read(struct gfs2_glock *gl, u64 blkno, int flags,
}
bh->b_end_io = end_buffer_read_sync;
get_bh(bh);
- submit_bh(READ_SYNC | (1 << BIO_RW_META), bh);
+ submit_bh(READ_SYNC | REQ_META, bh);
if (!(flags & DIO_WAIT))
return 0;
@@ -432,7 +432,7 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen)
if (buffer_uptodate(first_bh))
goto out;
if (!buffer_locked(first_bh))
- ll_rw_block(READ_SYNC | (1 << BIO_RW_META), 1, &first_bh);
+ ll_rw_block(READ_SYNC | REQ_META, 1, &first_bh);
dblock++;
extlen--;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 3593b3a7290e8..fd4f8946abf50 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -275,7 +275,7 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector)
bio->bi_end_io = end_bio_io_page;
bio->bi_private = page;
- submit_bio(READ_SYNC | (1 << BIO_RW_META), bio);
+ submit_bio(READ_SYNC | REQ_META, bio);
wait_on_page_locked(page);
bio_put(bio);
if (!PageUptodate(page)) {
diff --git a/fs/nilfs2/segbuf.c b/fs/nilfs2/segbuf.c
index 2e6a2723b8fa5..4588fb9e93df7 100644
--- a/fs/nilfs2/segbuf.c
+++ b/fs/nilfs2/segbuf.c
@@ -508,7 +508,7 @@ static int nilfs_segbuf_write(struct nilfs_segment_buffer *segbuf,
* Last BIO is always sent through the following
* submission.
*/
- rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
res = nilfs_segbuf_submit_bio(segbuf, &wi, rw);
}
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 7fc5606e6ea58..4d379c8250aea 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -138,55 +138,83 @@ struct bio {
#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
/*
- * bio bi_rw flags
- *
- * bit 0 -- data direction
- * If not set, bio is a read from device. If set, it's a write to device.
- * bit 1 -- fail fast device errors
- * bit 2 -- fail fast transport errors
- * bit 3 -- fail fast driver errors
- * bit 4 -- rw-ahead when set
- * bit 5 -- barrier
- * Insert a serialization point in the IO queue, forcing previously
- * submitted IO to be completed before this one is issued.
- * bit 6 -- synchronous I/O hint.
- * bit 7 -- Unplug the device immediately after submitting this bio.
- * bit 8 -- metadata request
- * Used for tracing to differentiate metadata and data IO. May also
- * get some preferential treatment in the IO scheduler
- * bit 9 -- discard sectors
- * Informs the lower level device that this range of sectors is no longer
- * used by the file system and may thus be freed by the device. Used
- * for flash based storage.
- * Don't want driver retries for any fast fail whatever the reason.
- * bit 10 -- Tell the IO scheduler not to wait for more requests after this
- one has been submitted, even if it is a SYNC request.
+ * Request flags. For use in the cmd_flags field of struct request, and in
+ * bi_rw of struct bio. Note that some flags are only valid in either one.
*/
-enum bio_rw_flags {
- BIO_RW,
- BIO_RW_FAILFAST_DEV,
- BIO_RW_FAILFAST_TRANSPORT,
- BIO_RW_FAILFAST_DRIVER,
- /* above flags must match REQ_* */
- BIO_RW_AHEAD,
- BIO_RW_BARRIER,
- BIO_RW_SYNCIO,
- BIO_RW_UNPLUG,
- BIO_RW_META,
- BIO_RW_DISCARD,
- BIO_RW_NOIDLE,
+enum rq_flag_bits {
+ /* common flags */
+ __REQ_WRITE, /* not set, read. set, write */
+ __REQ_FAILFAST_DEV, /* no driver retries of device errors */
+ __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
+ __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */
+
+ __REQ_HARDBARRIER, /* may not be passed by drive either */
+ __REQ_SYNC, /* request is sync (sync write or read) */
+ __REQ_META, /* metadata io request */
+ __REQ_DISCARD, /* request to discard sectors */
+ __REQ_NOIDLE, /* don't anticipate more IO after this one */
+
+ /* bio only flags */
+ __REQ_UNPLUG, /* unplug the immediately after submission */
+ __REQ_RAHEAD, /* read ahead, can fail anytime */
+
+ /* request only flags */
+ __REQ_SORTED, /* elevator knows about this request */
+ __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
+ __REQ_FUA, /* forced unit access */
+ __REQ_NOMERGE, /* don't touch this for merging */
+ __REQ_STARTED, /* drive already may have started this one */
+ __REQ_DONTPREP, /* don't call prep for this one */
+ __REQ_QUEUED, /* uses queueing */
+ __REQ_ELVPRIV, /* elevator private data attached */
+ __REQ_FAILED, /* set if the request failed */
+ __REQ_QUIET, /* don't worry about errors */
+ __REQ_PREEMPT, /* set for "ide_preempt" requests */
+ __REQ_ORDERED_COLOR, /* is before or after barrier */
+ __REQ_ALLOCED, /* request came from our alloc pool */
+ __REQ_COPY_USER, /* contains copies of user pages */
+ __REQ_INTEGRITY, /* integrity metadata has been remapped */
+ __REQ_IO_STAT, /* account I/O stat */
+ __REQ_MIXED_MERGE, /* merge of different types, fail separately */
+ __REQ_NR_BITS, /* stops here */
};
-/*
- * First four bits must match between bio->bi_rw and rq->cmd_flags, make
- * that explicit here.
- */
-#define BIO_RW_RQ_MASK 0xf
-
-static inline bool bio_rw_flagged(struct bio *bio, enum bio_rw_flags flag)
-{
- return (bio->bi_rw & (1 << flag)) != 0;
-}
+#define REQ_WRITE (1 << __REQ_WRITE)
+#define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV)
+#define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT)
+#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
+#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
+#define REQ_SYNC (1 << __REQ_SYNC)
+#define REQ_META (1 << __REQ_META)
+#define REQ_DISCARD (1 << __REQ_DISCARD)
+#define REQ_NOIDLE (1 << __REQ_NOIDLE)
+
+#define REQ_FAILFAST_MASK \
+ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
+#define REQ_COMMON_MASK \
+ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \
+ REQ_META| REQ_DISCARD | REQ_NOIDLE)
+
+#define REQ_UNPLUG (1 << __REQ_UNPLUG)
+#define REQ_RAHEAD (1 << __REQ_RAHEAD)
+
+#define REQ_SORTED (1 << __REQ_SORTED)
+#define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER)
+#define REQ_FUA (1 << __REQ_FUA)
+#define REQ_NOMERGE (1 << __REQ_NOMERGE)
+#define REQ_STARTED (1 << __REQ_STARTED)
+#define REQ_DONTPREP (1 << __REQ_DONTPREP)
+#define REQ_QUEUED (1 << __REQ_QUEUED)
+#define REQ_ELVPRIV (1 << __REQ_ELVPRIV)
+#define REQ_FAILED (1 << __REQ_FAILED)
+#define REQ_QUIET (1 << __REQ_QUIET)
+#define REQ_PREEMPT (1 << __REQ_PREEMPT)
+#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR)
+#define REQ_ALLOCED (1 << __REQ_ALLOCED)
+#define REQ_COPY_USER (1 << __REQ_COPY_USER)
+#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
+#define REQ_IO_STAT (1 << __REQ_IO_STAT)
+#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE)
/*
* upper 16 bits of bi_rw define the io priority of this bio
@@ -211,7 +239,10 @@ static inline bool bio_rw_flagged(struct bio *bio, enum bio_rw_flags flag)
#define bio_offset(bio) bio_iovec((bio))->bv_offset
#define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx)
#define bio_sectors(bio) ((bio)->bi_size >> 9)
-#define bio_empty_barrier(bio) (bio_rw_flagged(bio, BIO_RW_BARRIER) && !bio_has_data(bio) && !bio_rw_flagged(bio, BIO_RW_DISCARD))
+#define bio_empty_barrier(bio) \
+ ((bio->bi_rw & REQ_HARDBARRIER) && \
+ !bio_has_data(bio) && \
+ !(bio->bi_rw & REQ_DISCARD))
static inline unsigned int bio_cur_bytes(struct bio *bio)
{
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3ecd28ef9ba44..3fc0f5908619e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -84,70 +84,6 @@ enum {
REQ_LB_OP_FLUSH = 0x41, /* flush request */
};
-/*
- * request type modified bits. first four bits match BIO_RW* bits, important
- */
-enum rq_flag_bits {
- __REQ_RW, /* not set, read. set, write */
- __REQ_FAILFAST_DEV, /* no driver retries of device errors */
- __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
- __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */
- /* above flags must match BIO_RW_* */
- __REQ_DISCARD, /* request to discard sectors */
- __REQ_SORTED, /* elevator knows about this request */
- __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
- __REQ_HARDBARRIER, /* may not be passed by drive either */
- __REQ_FUA, /* forced unit access */
- __REQ_NOMERGE, /* don't touch this for merging */
- __REQ_STARTED, /* drive already may have started this one */
- __REQ_DONTPREP, /* don't call prep for this one */
- __REQ_QUEUED, /* uses queueing */
- __REQ_ELVPRIV, /* elevator private data attached */
- __REQ_FAILED, /* set if the request failed */
- __REQ_QUIET, /* don't worry about errors */
- __REQ_PREEMPT, /* set for "ide_preempt" requests */
- __REQ_ORDERED_COLOR, /* is before or after barrier */
- __REQ_RW_SYNC, /* request is sync (sync write or read) */
- __REQ_ALLOCED, /* request came from our alloc pool */
- __REQ_RW_META, /* metadata io request */
- __REQ_COPY_USER, /* contains copies of user pages */
- __REQ_INTEGRITY, /* integrity metadata has been remapped */
- __REQ_NOIDLE, /* Don't anticipate more IO after this one */
- __REQ_IO_STAT, /* account I/O stat */
- __REQ_MIXED_MERGE, /* merge of different types, fail separately */
- __REQ_NR_BITS, /* stops here */
-};
-
-#define REQ_RW (1 << __REQ_RW)
-#define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV)
-#define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT)
-#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
-#define REQ_DISCARD (1 << __REQ_DISCARD)
-#define REQ_SORTED (1 << __REQ_SORTED)
-#define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER)
-#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
-#define REQ_FUA (1 << __REQ_FUA)
-#define REQ_NOMERGE (1 << __REQ_NOMERGE)
-#define REQ_STARTED (1 << __REQ_STARTED)
-#define REQ_DONTPREP (1 << __REQ_DONTPREP)
-#define REQ_QUEUED (1 << __REQ_QUEUED)
-#define REQ_ELVPRIV (1 << __REQ_ELVPRIV)
-#define REQ_FAILED (1 << __REQ_FAILED)
-#define REQ_QUIET (1 << __REQ_QUIET)
-#define REQ_PREEMPT (1 << __REQ_PREEMPT)
-#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR)
-#define REQ_RW_SYNC (1 << __REQ_RW_SYNC)
-#define REQ_ALLOCED (1 << __REQ_ALLOCED)
-#define REQ_RW_META (1 << __REQ_RW_META)
-#define REQ_COPY_USER (1 << __REQ_COPY_USER)
-#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
-#define REQ_NOIDLE (1 << __REQ_NOIDLE)
-#define REQ_IO_STAT (1 << __REQ_IO_STAT)
-#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE)
-
-#define REQ_FAILFAST_MASK (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | \
- REQ_FAILFAST_DRIVER)
-
#define BLK_MAX_CDB 16
/*
@@ -631,7 +567,7 @@ enum {
*/
static inline bool rw_is_sync(unsigned int rw_flags)
{
- return !(rw_flags & REQ_RW) || (rw_flags & REQ_RW_SYNC);
+ return !(rw_flags & REQ_WRITE) || (rw_flags & REQ_SYNC);
}
static inline bool rq_is_sync(struct request *rq)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 5988788314978..c5c92943c7671 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -144,29 +144,31 @@ struct inodes_stat_t {
* of this IO.
*
*/
-#define RW_MASK 1
-#define RWA_MASK 2
-#define READ 0
-#define WRITE 1
-#define READA 2 /* read-ahead - don't block if no resources */
-#define SWRITE 3 /* for ll_rw_block() - wait for buffer lock */
-#define READ_SYNC (READ | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
-#define READ_META (READ | (1 << BIO_RW_META))
-#define WRITE_SYNC_PLUG (WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
-#define WRITE_SYNC (WRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
-#define WRITE_ODIRECT_PLUG (WRITE | (1 << BIO_RW_SYNCIO))
-#define WRITE_META (WRITE | (1 << BIO_RW_META))
-#define SWRITE_SYNC_PLUG \
- (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
-#define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
-#define WRITE_BARRIER (WRITE_SYNC | (1 << BIO_RW_BARRIER))
+#define RW_MASK 1
+#define RWA_MASK 2
+
+#define READ 0
+#define WRITE 1
+#define READA 2 /* readahead - don't block if no resources */
+#define SWRITE 3 /* for ll_rw_block() - wait for buffer lock */
+
+#define READ_SYNC (READ | REQ_SYNC | REQ_UNPLUG)
+#define READ_META (READ | REQ_META)
+#define WRITE_SYNC_PLUG (WRITE | REQ_SYNC | REQ_NOIDLE)
+#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG)
+#define WRITE_ODIRECT_PLUG (WRITE | REQ_SYNC)
+#define WRITE_META (WRITE | REQ_META)
+#define WRITE_BARRIER (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \
+ REQ_HARDBARRIER)
+#define SWRITE_SYNC_PLUG (SWRITE | REQ_SYNC | REQ_NOIDLE)
+#define SWRITE_SYNC (SWRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG)
/*
* These aren't really reads or writes, they pass down information about
* parts of device that are now unused by the file system.
*/
-#define DISCARD_NOBARRIER (WRITE | (1 << BIO_RW_DISCARD))
-#define DISCARD_BARRIER (DISCARD_NOBARRIER | (1 << BIO_RW_BARRIER))
+#define DISCARD_NOBARRIER (WRITE | REQ_DISCARD)
+#define DISCARD_BARRIER (WRITE | REQ_DISCARD | REQ_HARDBARRIER)
#define SEL_IN 1
#define SEL_OUT 2
diff --git a/kernel/power/block_io.c b/kernel/power/block_io.c
index 97024fd40cd5f..83bbc7c02df95 100644
--- a/kernel/power/block_io.c
+++ b/kernel/power/block_io.c
@@ -28,7 +28,7 @@
static int submit(int rw, struct block_device *bdev, sector_t sector,
struct page *page, struct bio **bio_chain)
{
- const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ const int bio_rw = rw | REQ_SYNC | REQ_UNPLUG;
struct bio *bio;
bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 4f149944cb89e..3b4a695051b60 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -169,9 +169,12 @@ static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ),
BLK_TC_ACT(BLK_TC_WRITE) };
+#define BLK_TC_HARDBARRIER BLK_TC_BARRIER
+#define BLK_TC_RAHEAD BLK_TC_AHEAD
+
/* The ilog2() calls fall out because they're constant */
-#define MASK_TC_BIT(rw, __name) ((rw & (1 << BIO_RW_ ## __name)) << \
- (ilog2(BLK_TC_ ## __name) + BLK_TC_SHIFT - BIO_RW_ ## __name))
+#define MASK_TC_BIT(rw, __name) ((rw & REQ_ ## __name) << \
+ (ilog2(BLK_TC_ ## __name) + BLK_TC_SHIFT - __REQ_ ## __name))
/*
* The worker for the various blk_add_trace*() types. Fills out a
@@ -194,9 +197,9 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
return;
what |= ddir_act[rw & WRITE];
- what |= MASK_TC_BIT(rw, BARRIER);
- what |= MASK_TC_BIT(rw, SYNCIO);
- what |= MASK_TC_BIT(rw, AHEAD);
+ what |= MASK_TC_BIT(rw, HARDBARRIER);
+ what |= MASK_TC_BIT(rw, SYNC);
+ what |= MASK_TC_BIT(rw, RAHEAD);
what |= MASK_TC_BIT(rw, META);
what |= MASK_TC_BIT(rw, DISCARD);
@@ -662,7 +665,7 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
return;
if (rq->cmd_flags & REQ_DISCARD)
- rw |= (1 << BIO_RW_DISCARD);
+ rw |= REQ_DISCARD;
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
what |= BLK_TC_ACT(BLK_TC_PC);
@@ -1755,20 +1758,20 @@ void blk_fill_rwbs(char *rwbs, u32 rw, int bytes)
if (rw & WRITE)
rwbs[i++] = 'W';
- else if (rw & 1 << BIO_RW_DISCARD)
+ else if (rw & REQ_DISCARD)
rwbs[i++] = 'D';
else if (bytes)
rwbs[i++] = 'R';
else
rwbs[i++] = 'N';
- if (rw & 1 << BIO_RW_AHEAD)
+ if (rw & REQ_RAHEAD)
rwbs[i++] = 'A';
- if (rw & 1 << BIO_RW_BARRIER)
+ if (rw & REQ_HARDBARRIER)
rwbs[i++] = 'B';
- if (rw & 1 << BIO_RW_SYNCIO)
+ if (rw & REQ_SYNC)
rwbs[i++] = 'S';
- if (rw & 1 << BIO_RW_META)
+ if (rw & REQ_META)
rwbs[i++] = 'M';
rwbs[i] = '\0';
@@ -1780,7 +1783,7 @@ void blk_fill_rwbs_rq(char *rwbs, struct request *rq)
int bytes;
if (rq->cmd_flags & REQ_DISCARD)
- rw |= (1 << BIO_RW_DISCARD);
+ rw |= REQ_DISCARD;
bytes = blk_rq_bytes(rq);
diff --git a/mm/page_io.c b/mm/page_io.c
index 31a3b962230a9..2dee975bf4690 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -106,7 +106,7 @@ int swap_writepage(struct page *page, struct writeback_control *wbc)
goto out;
}
if (wbc->sync_mode == WB_SYNC_ALL)
- rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
+ rw |= REQ_SYNC | REQ_UNPLUG;
count_vm_event(PSWPOUT);
set_page_writeback(page);
unlock_page(page);
--
GitLab
From 15fa6e81650a167f82dc0d478f290f1cffa9183d Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Fri, 18 Jun 2010 12:10:18 +0200
Subject: [PATCH 287/863] virtio_blk: add default case to cmd type switch
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On compilation, gcc correctly detects that we do not handle
all types:
In function ‘blk_done’:
warning: enumeration value ‘REQ_TYPE_FS’ not handled in switch
warning: enumeration value ‘REQ_TYPE_SENSE’ not handled in switch
warning: enumeration value ‘REQ_TYPE_PM_SUSPEND’ not handled in switch
warning: enumeration value ‘REQ_TYPE_PM_RESUME’ not handled in switch
warning: enumeration value ‘REQ_TYPE_PM_SHUTDOWN’ not handled in switch
warning: enumeration value ‘REQ_TYPE_LINUX_BLOCK’ not handled in switch
warning: enumeration value ‘REQ_TYPE_ATA_TASKFILE’ not handled in switch
warning: enumeration value ‘REQ_TYPE_ATA_PC’ not handled in switch
which is a bit pointless since this is at the end of the request
processessing. Add a default case that just breaks out.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/virtio_blk.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 774144334ecee..b5ebcd33bdb61 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -74,6 +74,8 @@ static void blk_done(struct virtqueue *vq)
case REQ_TYPE_SPECIAL:
vbr->req->errors = (error != 0);
break;
+ default:
+ break;
}
__blk_end_request_all(vbr->req, error);
--
GitLab
From 4c4762d10faf93167b84ee03e4b58dd62012b06f Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Sat, 19 Jun 2010 17:26:47 +0200
Subject: [PATCH 288/863] block: fix some more cmd_type cleanup fallout
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/ub.c | 2 +-
drivers/ide/ide-atapi.c | 6 +++---
drivers/ide/ide-cd.c | 4 ++--
drivers/ide/ide-io.c | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 034b34440ffa3..aaf27fb4efd6e 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -648,7 +648,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
return 0;
}
- if (lun->changed && rq->cmd_type != REQ_TYPE_BLOCK_PC)
+ if (lun->changed && rq->cmd_type != REQ_TYPE_BLOCK_PC) {
blk_start_request(rq);
ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
return 0;
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 3117a894d20e0..e88a2cf177110 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -307,7 +307,7 @@ EXPORT_SYMBOL_GPL(ide_cd_expiry);
int ide_cd_get_xferlen(struct request *rq)
{
- switch (rq->cmd_type)
+ switch (rq->cmd_type) {
case REQ_TYPE_FS:
return 32768;
case REQ_TYPE_SENSE:
@@ -477,12 +477,12 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
if (uptodate == 0)
drive->failed_pc = NULL;
- if (rq->cmd_type == REQ_TYPE_SPECIAL)
+ if (rq->cmd_type == REQ_TYPE_SPECIAL) {
rq->errors = 0;
error = 0;
} else {
- if (req->cmd_type != REQ_TYPE_FS && uptodate <= 0) {
+ if (rq->cmd_type != REQ_TYPE_FS && uptodate <= 0) {
if (rq->errors == 0)
rq->errors = -EIO;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 26a3688de467f..ef7e3a9bee518 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -318,7 +318,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
cdrom_saw_media_change(drive);
if (rq->cmd_type == REQ_TYPE_FS &&
- !(rq->cmd_flags & REQ_QUIET)) {
+ !(rq->cmd_flags & REQ_QUIET))
printk(KERN_ERR PFX "%s: tray open\n",
drive->name);
}
@@ -375,7 +375,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
do_end_request = 1;
break;
default:
- if (req->cmd_type != REQ_TYPE_FS)
+ if (rq->cmd_type != REQ_TYPE_FS)
break;
if (err & ~ATA_ABORTED) {
/* go to the default handler for other errors */
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 9304a7e54d9e9..a381be814070f 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -353,7 +353,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_rq(drive, rq);
return startstop;
- } else if (!rq->rq_disk && rq->cmd_type == REQ_TYPE_SPECIAL) {
+ } else if (!rq->rq_disk && rq->cmd_type == REQ_TYPE_SPECIAL)
/*
* TODO: Once all ULDs have been modified to
* check for specific op codes rather than
--
GitLab
From c1955ce32fdb0877b7a1b22feb2669358f65be76 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Sat, 19 Jun 2010 23:08:06 +0200
Subject: [PATCH 289/863] writeback: remove wb_list
The wb_list member of struct backing_device_info always has exactly one
element. Just use the direct bdi->wb pointer instead and simplify some
code.
Also remove bdi_task_init which is now trivial to prepare for the next
patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 4 +-
include/linux/backing-dev.h | 5 +--
mm/backing-dev.c | 83 +++++++++++++------------------------
3 files changed, 32 insertions(+), 60 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index d5be1693ac938..d67989b8ba44d 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -73,9 +73,9 @@ static void bdi_queue_work(struct backing_dev_info *bdi,
* If the default thread isn't there, make sure we add it. When
* it gets created and wakes up, we'll run this work.
*/
- if (unlikely(list_empty_careful(&bdi->wb_list)))
+ if (unlikely(!bdi->wb.task)) {
wake_up_process(default_backing_dev_info.wb.task);
- else {
+ } else {
struct bdi_writeback *wb = &bdi->wb;
if (wb->task)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index e9aec0d099df3..50f1461461690 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -45,8 +45,6 @@ enum bdi_stat_item {
#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
struct bdi_writeback {
- struct list_head list; /* hangs off the bdi */
-
struct backing_dev_info *bdi; /* our parent bdi */
unsigned int nr;
@@ -80,8 +78,7 @@ struct backing_dev_info {
unsigned int max_ratio, max_prop_frac;
struct bdi_writeback wb; /* default writeback info for this bdi */
- spinlock_t wb_lock; /* protects update side of wb_list */
- struct list_head wb_list; /* the flusher threads hanging off this bdi */
+ spinlock_t wb_lock; /* protects work_list */
struct list_head work_list;
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 123bcef13e518..6c2a09c8922c1 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -65,28 +65,21 @@ static void bdi_debug_init(void)
static int bdi_debug_stats_show(struct seq_file *m, void *v)
{
struct backing_dev_info *bdi = m->private;
- struct bdi_writeback *wb;
+ struct bdi_writeback *wb = &bdi->wb;
unsigned long background_thresh;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
unsigned long nr_dirty, nr_io, nr_more_io, nr_wb;
struct inode *inode;
- /*
- * inode lock is enough here, the bdi->wb_list is protected by
- * RCU on the reader side
- */
nr_wb = nr_dirty = nr_io = nr_more_io = 0;
spin_lock(&inode_lock);
- list_for_each_entry(wb, &bdi->wb_list, list) {
- nr_wb++;
- list_for_each_entry(inode, &wb->b_dirty, i_list)
- nr_dirty++;
- list_for_each_entry(inode, &wb->b_io, i_list)
- nr_io++;
- list_for_each_entry(inode, &wb->b_more_io, i_list)
- nr_more_io++;
- }
+ list_for_each_entry(inode, &wb->b_dirty, i_list)
+ nr_dirty++;
+ list_for_each_entry(inode, &wb->b_io, i_list)
+ nr_io++;
+ list_for_each_entry(inode, &wb->b_more_io, i_list)
+ nr_more_io++;
spin_unlock(&inode_lock);
get_dirty_limits(&background_thresh, &dirty_thresh, &bdi_thresh, bdi);
@@ -98,19 +91,16 @@ static int bdi_debug_stats_show(struct seq_file *m, void *v)
"BdiDirtyThresh: %8lu kB\n"
"DirtyThresh: %8lu kB\n"
"BackgroundThresh: %8lu kB\n"
- "WritebackThreads: %8lu\n"
"b_dirty: %8lu\n"
"b_io: %8lu\n"
"b_more_io: %8lu\n"
"bdi_list: %8u\n"
- "state: %8lx\n"
- "wb_list: %8u\n",
+ "state: %8lx\n",
(unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
(unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
K(bdi_thresh), K(dirty_thresh),
- K(background_thresh), nr_wb, nr_dirty, nr_io, nr_more_io,
- !list_empty(&bdi->bdi_list), bdi->state,
- !list_empty(&bdi->wb_list));
+ K(background_thresh), nr_dirty, nr_io, nr_more_io,
+ !list_empty(&bdi->bdi_list), bdi->state);
#undef K
return 0;
@@ -270,24 +260,6 @@ static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
INIT_LIST_HEAD(&wb->b_more_io);
}
-static void bdi_task_init(struct backing_dev_info *bdi,
- struct bdi_writeback *wb)
-{
- struct task_struct *tsk = current;
-
- spin_lock(&bdi->wb_lock);
- list_add_tail_rcu(&wb->list, &bdi->wb_list);
- spin_unlock(&bdi->wb_lock);
-
- tsk->flags |= PF_FLUSHER | PF_SWAPWRITE;
- set_freezable();
-
- /*
- * Our parent may run at a different priority, just set us to normal
- */
- set_user_nice(tsk, 0);
-}
-
static int bdi_start_fn(void *ptr)
{
struct bdi_writeback *wb = ptr;
@@ -301,7 +273,13 @@ static int bdi_start_fn(void *ptr)
list_add_rcu(&bdi->bdi_list, &bdi_list);
spin_unlock_bh(&bdi_lock);
- bdi_task_init(bdi, wb);
+ current->flags |= PF_FLUSHER | PF_SWAPWRITE;
+ set_freezable();
+
+ /*
+ * Our parent may run at a different priority, just set us to normal
+ */
+ set_user_nice(current, 0);
/*
* Clear pending bit and wakeup anybody waiting to tear us down
@@ -312,12 +290,7 @@ static int bdi_start_fn(void *ptr)
ret = bdi_writeback_task(wb);
- /*
- * Remove us from the list
- */
- spin_lock(&bdi->wb_lock);
- list_del_rcu(&wb->list);
- spin_unlock(&bdi->wb_lock);
+ wb->task = NULL;
/*
* Flush any work that raced with us exiting. No new work
@@ -326,7 +299,6 @@ static int bdi_start_fn(void *ptr)
if (!list_empty(&bdi->work_list))
wb_do_writeback(wb, 1);
- wb->task = NULL;
return ret;
}
@@ -391,7 +363,13 @@ static int bdi_forker_task(void *ptr)
{
struct bdi_writeback *me = ptr;
- bdi_task_init(me->bdi, me);
+ current->flags |= PF_FLUSHER | PF_SWAPWRITE;
+ set_freezable();
+
+ /*
+ * Our parent may run at a different priority, just set us to normal
+ */
+ set_user_nice(current, 0);
for (;;) {
struct backing_dev_info *bdi, *tmp;
@@ -598,8 +576,6 @@ EXPORT_SYMBOL(bdi_register_dev);
*/
static void bdi_wb_shutdown(struct backing_dev_info *bdi)
{
- struct bdi_writeback *wb;
-
if (!bdi_cap_writeback_dirty(bdi))
return;
@@ -615,14 +591,14 @@ static void bdi_wb_shutdown(struct backing_dev_info *bdi)
bdi_remove_from_list(bdi);
/*
- * Finally, kill the kernel threads. We don't need to be RCU
+ * Finally, kill the kernel thread. We don't need to be RCU
* safe anymore, since the bdi is gone from visibility. Force
* unfreeze of the thread before calling kthread_stop(), otherwise
* it would never exet if it is currently stuck in the refrigerator.
*/
- list_for_each_entry(wb, &bdi->wb_list, list) {
- thaw_process(wb->task);
- kthread_stop(wb->task);
+ if (bdi->wb.task) {
+ thaw_process(bdi->wb.task);
+ kthread_stop(bdi->wb.task);
}
}
@@ -667,7 +643,6 @@ int bdi_init(struct backing_dev_info *bdi)
spin_lock_init(&bdi->wb_lock);
INIT_RCU_HEAD(&bdi->rcu_head);
INIT_LIST_HEAD(&bdi->bdi_list);
- INIT_LIST_HEAD(&bdi->wb_list);
INIT_LIST_HEAD(&bdi->work_list);
bdi_wb_init(&bdi->wb, bdi);
--
GitLab
From 082439004b31adc146e96e5f1c574dd2b57dcd93 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Sat, 19 Jun 2010 23:08:22 +0200
Subject: [PATCH 290/863] writeback: merge bdi_writeback_task and bdi_start_fn
Move all code for the writeback thread into fs/fs-writeback.c instead of
splitting it over two functions in two files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 35 ++++++++++++++++++++++++++++-
include/linux/backing-dev.h | 2 +-
mm/backing-dev.c | 44 +------------------------------------
3 files changed, 36 insertions(+), 45 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index d67989b8ba44d..c8471b3ddccfa 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -775,12 +775,36 @@ long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
* Handle writeback of dirty data for the device backed by this bdi. Also
* wakes up periodically and does kupdated style flushing.
*/
-int bdi_writeback_task(struct bdi_writeback *wb)
+int bdi_writeback_thread(void *data)
{
+ struct bdi_writeback *wb = data;
+ struct backing_dev_info *bdi = wb->bdi;
unsigned long last_active = jiffies;
unsigned long wait_jiffies = -1UL;
long pages_written;
+ /*
+ * Add us to the active bdi_list
+ */
+ spin_lock_bh(&bdi_lock);
+ list_add_rcu(&bdi->bdi_list, &bdi_list);
+ spin_unlock_bh(&bdi_lock);
+
+ current->flags |= PF_FLUSHER | PF_SWAPWRITE;
+ set_freezable();
+
+ /*
+ * Our parent may run at a different priority, just set us to normal
+ */
+ set_user_nice(current, 0);
+
+ /*
+ * Clear pending bit and wakeup anybody waiting to tear us down
+ */
+ clear_bit(BDI_pending, &bdi->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&bdi->state, BDI_pending);
+
while (!kthread_should_stop()) {
pages_written = wb_do_writeback(wb, 0);
@@ -813,9 +837,18 @@ int bdi_writeback_task(struct bdi_writeback *wb)
try_to_freeze();
}
+ wb->task = NULL;
+
+ /*
+ * Flush any work that raced with us exiting. No new work
+ * will be added, since this bdi isn't discoverable anymore.
+ */
+ if (!list_empty(&bdi->work_list))
+ wb_do_writeback(wb, 1);
return 0;
}
+
/*
* Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
* the whole world.
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 50f1461461690..e536f3a74e601 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -102,7 +102,7 @@ void bdi_unregister(struct backing_dev_info *bdi);
int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
void bdi_start_background_writeback(struct backing_dev_info *bdi);
-int bdi_writeback_task(struct bdi_writeback *wb);
+int bdi_writeback_thread(void *data);
int bdi_has_dirty_io(struct backing_dev_info *bdi);
void bdi_arm_supers_timer(void);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 6c2a09c8922c1..bceac647e4d16 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -260,48 +260,6 @@ static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
INIT_LIST_HEAD(&wb->b_more_io);
}
-static int bdi_start_fn(void *ptr)
-{
- struct bdi_writeback *wb = ptr;
- struct backing_dev_info *bdi = wb->bdi;
- int ret;
-
- /*
- * Add us to the active bdi_list
- */
- spin_lock_bh(&bdi_lock);
- list_add_rcu(&bdi->bdi_list, &bdi_list);
- spin_unlock_bh(&bdi_lock);
-
- current->flags |= PF_FLUSHER | PF_SWAPWRITE;
- set_freezable();
-
- /*
- * Our parent may run at a different priority, just set us to normal
- */
- set_user_nice(current, 0);
-
- /*
- * Clear pending bit and wakeup anybody waiting to tear us down
- */
- clear_bit(BDI_pending, &bdi->state);
- smp_mb__after_clear_bit();
- wake_up_bit(&bdi->state, BDI_pending);
-
- ret = bdi_writeback_task(wb);
-
- wb->task = NULL;
-
- /*
- * Flush any work that raced with us exiting. No new work
- * will be added, since this bdi isn't discoverable anymore.
- */
- if (!list_empty(&bdi->work_list))
- wb_do_writeback(wb, 1);
-
- return ret;
-}
-
int bdi_has_dirty_io(struct backing_dev_info *bdi)
{
return wb_has_dirty_io(&bdi->wb);
@@ -425,7 +383,7 @@ static int bdi_forker_task(void *ptr)
spin_unlock_bh(&bdi_lock);
wb = &bdi->wb;
- wb->task = kthread_run(bdi_start_fn, wb, "flush-%s",
+ wb->task = kthread_run(bdi_writeback_thread, wb, "flush-%s",
dev_name(bdi->dev));
/*
* If task creation fails, then readd the bdi to
--
GitLab
From 66ac0280197981f88774e74b60c8e5f9f07c1dba Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 18 Jun 2010 16:59:42 +0200
Subject: [PATCH 291/863] block: don't allocate a payload for discard request
Allocating a fixed payload for discard requests always was a horrible hack,
and it's not coming to byte us when adding support for discard in DM/MD.
So change the code to leave the allocation of a payload to the lowlevel
driver. Unfortunately that means we'll need another hack, which allows
us to update the various block layer length fields indicating that we
have a payload. Instead of hiding this in sd.c, which we already partially
do for UNMAP support add a documented helper in the core block layer for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-core.c | 32 ++++++++++++++++++++++++++
block/blk-lib.c | 33 +++++----------------------
drivers/scsi/sd.c | 52 +++++++++++++++++++++++++++---------------
include/linux/blkdev.h | 2 ++
4 files changed, 74 insertions(+), 45 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 66c3cfe94d0ad..3531d8e1da048 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1135,6 +1135,38 @@ void blk_put_request(struct request *req)
}
EXPORT_SYMBOL(blk_put_request);
+/**
+ * blk_add_request_payload - add a payload to a request
+ * @rq: request to update
+ * @page: page backing the payload
+ * @len: length of the payload.
+ *
+ * This allows to later add a payload to an already submitted request by
+ * a block driver. The driver needs to take care of freeing the payload
+ * itself.
+ *
+ * Note that this is a quite horrible hack and nothing but handling of
+ * discard requests should ever use it.
+ */
+void blk_add_request_payload(struct request *rq, struct page *page,
+ unsigned int len)
+{
+ struct bio *bio = rq->bio;
+
+ bio->bi_io_vec->bv_page = page;
+ bio->bi_io_vec->bv_offset = 0;
+ bio->bi_io_vec->bv_len = len;
+
+ bio->bi_size = len;
+ bio->bi_vcnt = 1;
+ bio->bi_phys_segments = 1;
+
+ rq->__data_len = rq->resid_len = len;
+ rq->nr_phys_segments = 1;
+ rq->buffer = bio_data(bio);
+}
+EXPORT_SYMBOL_GPL(blk_add_request_payload);
+
void init_request_from_bio(struct request *req, struct bio *bio)
{
req->cpu = bio->bi_comp_cpu;
diff --git a/block/blk-lib.c b/block/blk-lib.c
index d0216b9f22d45..e16185b0d8e14 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -19,7 +19,6 @@ static void blkdev_discard_end_io(struct bio *bio, int err)
if (bio->bi_private)
complete(bio->bi_private);
- __free_page(bio_page(bio));
bio_put(bio);
}
@@ -43,7 +42,6 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
int type = flags & BLKDEV_IFL_BARRIER ?
DISCARD_BARRIER : DISCARD_NOBARRIER;
struct bio *bio;
- struct page *page;
int ret = 0;
if (!q)
@@ -53,35 +51,21 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
return -EOPNOTSUPP;
while (nr_sects && !ret) {
- unsigned int sector_size = q->limits.logical_block_size;
unsigned int max_discard_sectors =
min(q->limits.max_discard_sectors, UINT_MAX >> 9);
bio = bio_alloc(gfp_mask, 1);
- if (!bio)
- goto out;
+ if (!bio) {
+ ret = -ENOMEM;
+ break;
+ }
+
bio->bi_sector = sector;
bio->bi_end_io = blkdev_discard_end_io;
bio->bi_bdev = bdev;
if (flags & BLKDEV_IFL_WAIT)
bio->bi_private = &wait;
- /*
- * Add a zeroed one-sector payload as that's what
- * our current implementations need. If we'll ever need
- * more the interface will need revisiting.
- */
- page = alloc_page(gfp_mask | __GFP_ZERO);
- if (!page)
- goto out_free_bio;
- if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size)
- goto out_free_page;
-
- /*
- * And override the bio size - the way discard works we
- * touch many more blocks on disk than the actual payload
- * length.
- */
if (nr_sects > max_discard_sectors) {
bio->bi_size = max_discard_sectors << 9;
nr_sects -= max_discard_sectors;
@@ -103,13 +87,8 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
ret = -EIO;
bio_put(bio);
}
+
return ret;
-out_free_page:
- __free_page(page);
-out_free_bio:
- bio_put(bio);
-out:
- return -ENOMEM;
}
EXPORT_SYMBOL(blkdev_issue_discard);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a3fdf4dc59da7..86da819c70eb1 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -411,22 +411,25 @@ static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
}
/**
- * sd_prepare_discard - unmap blocks on thinly provisioned device
+ * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
+ * @sdp: scsi device to operate one
* @rq: Request to prepare
*
* Will issue either UNMAP or WRITE SAME(16) depending on preference
* indicated by target device.
**/
-static int sd_prepare_discard(struct request *rq)
+static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
{
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
struct bio *bio = rq->bio;
sector_t sector = bio->bi_sector;
- unsigned int num = bio_sectors(bio);
+ unsigned int nr_sectors = bio_sectors(bio);
+ unsigned int len;
+ struct page *page;
if (sdkp->device->sector_size == 4096) {
sector >>= 3;
- num >>= 3;
+ nr_sectors >>= 3;
}
rq->cmd_type = REQ_TYPE_BLOCK_PC;
@@ -434,31 +437,35 @@ static int sd_prepare_discard(struct request *rq)
memset(rq->cmd, 0, rq->cmd_len);
+ page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
+ if (!page)
+ return BLKPREP_DEFER;
+
if (sdkp->unmap) {
- char *buf = kmap_atomic(bio_page(bio), KM_USER0);
+ char *buf = page_address(page);
+ rq->cmd_len = 10;
rq->cmd[0] = UNMAP;
rq->cmd[8] = 24;
- rq->cmd_len = 10;
-
- /* Ensure that data length matches payload */
- rq->__data_len = bio->bi_size = bio->bi_io_vec->bv_len = 24;
put_unaligned_be16(6 + 16, &buf[0]);
put_unaligned_be16(16, &buf[2]);
put_unaligned_be64(sector, &buf[8]);
- put_unaligned_be32(num, &buf[16]);
+ put_unaligned_be32(nr_sectors, &buf[16]);
- kunmap_atomic(buf, KM_USER0);
+ len = 24;
} else {
+ rq->cmd_len = 16;
rq->cmd[0] = WRITE_SAME_16;
rq->cmd[1] = 0x8; /* UNMAP */
put_unaligned_be64(sector, &rq->cmd[2]);
- put_unaligned_be32(num, &rq->cmd[10]);
- rq->cmd_len = 16;
+ put_unaligned_be32(nr_sectors, &rq->cmd[10]);
+
+ len = sdkp->device->sector_size;
}
- return BLKPREP_OK;
+ blk_add_request_payload(rq, page, len);
+ return scsi_setup_blk_pc_cmnd(sdp, rq);
}
/**
@@ -485,10 +492,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
* Discard request come in as REQ_TYPE_FS but we turn them into
* block PC requests to make life easier.
*/
- if (rq->cmd_flags & REQ_DISCARD)
- ret = sd_prepare_discard(rq);
-
- if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
+ if (rq->cmd_flags & REQ_DISCARD) {
+ ret = scsi_setup_discard_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
goto out;
} else if (rq->cmd_type != REQ_TYPE_FS) {
@@ -1163,6 +1170,15 @@ static int sd_done(struct scsi_cmnd *SCpnt)
int sense_valid = 0;
int sense_deferred = 0;
+ /*
+ * If this is a discard request that originated from the kernel
+ * we need to free our payload here. Note that we need to check
+ * the request flag as the normal payload rules apply for
+ * pass-through UNMAP / WRITE SAME requests.
+ */
+ if (SCpnt->request->cmd_flags & REQ_DISCARD)
+ __free_page(bio_page(SCpnt->request->bio));
+
if (result) {
sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
if (sense_valid)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3fc0f5908619e..204fbe22354d9 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -705,6 +705,8 @@ extern struct request *blk_make_request(struct request_queue *, struct bio *,
gfp_t);
extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
extern void blk_requeue_request(struct request_queue *, struct request *);
+extern void blk_add_request_payload(struct request *rq, struct page *page,
+ unsigned int len);
extern int blk_rq_check_limits(struct request_queue *q, struct request *rq);
extern int blk_lld_busy(struct request_queue *q);
extern int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
--
GitLab
From 2c8919dee659928d66cc13333d4e7a5bdd2206d5 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Mon, 21 Jun 2010 11:02:47 +0200
Subject: [PATCH 292/863] gcc-4.6: block: fix unused but set variables in
blk-merge
Just some dead code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-merge.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 4852475521ea9..3b0cd4249671d 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -12,7 +12,6 @@
static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
struct bio *bio)
{
- unsigned int phys_size;
struct bio_vec *bv, *bvprv = NULL;
int cluster, i, high, highprv = 1;
unsigned int seg_size, nr_phys_segs;
@@ -24,7 +23,7 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
fbio = bio;
cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
seg_size = 0;
- phys_size = nr_phys_segs = 0;
+ nr_phys_segs = 0;
for_each_bio(bio) {
bio_for_each_segment(bv, bio, i) {
/*
--
GitLab
From 1676effca4cd2a6b32e6e8e0ecaa91522dfda6fa Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Mon, 21 Jun 2010 11:02:48 +0200
Subject: [PATCH 293/863] gcc-4.6: fs: fix unused but set warnings
No real bugs I believe, just some dead code, and some
shut up code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/splice.c | 2 --
include/linux/audit.h | 2 +-
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/fs/splice.c b/fs/splice.c
index efdbfece99320..ec11c52d646d0 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -597,7 +597,6 @@ ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
struct page *pages[PIPE_DEF_BUFFERS];
struct partial_page partial[PIPE_DEF_BUFFERS];
struct iovec *vec, __vec[PIPE_DEF_BUFFERS];
- pgoff_t index;
ssize_t res;
size_t this_len;
int error;
@@ -621,7 +620,6 @@ ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
goto shrink_ret;
}
- index = *ppos >> PAGE_CACHE_SHIFT;
offset = *ppos & ~PAGE_CACHE_MASK;
nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
diff --git a/include/linux/audit.h b/include/linux/audit.h
index f391d45c8aea4..e24afabc548f1 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -544,7 +544,7 @@ extern int audit_signals;
#define audit_putname(n) do { ; } while (0)
#define __audit_inode(n,d) do { ; } while (0)
#define __audit_inode_child(i,p) do { ; } while (0)
-#define audit_inode(n,d) do { ; } while (0)
+#define audit_inode(n,d) do { (void)(d); } while (0)
#define audit_inode_child(i,p) do { ; } while (0)
#define audit_core_dumps(i) do { ; } while (0)
#define auditsc_get_stamp(c,t,s) (0)
--
GitLab
From 511d37af66246c67f65e7896c230bdb81d853b6c Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Tue, 22 Jun 2010 09:03:43 -0700
Subject: [PATCH 294/863] block/xd.c: fix brace typo
Fix extra brace typo that is causing build errors.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index 4dc2983760985..b16a3a926cf26 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -322,7 +322,7 @@ static void do_xd_request (struct request_queue * q)
int res = -EIO;
int retry;
- if (req->cmd_type != REQ_TYPE_FS) {
+ if (req->cmd_type != REQ_TYPE_FS)
goto done;
if (block + count > get_capacity(req->rq_disk))
goto done;
--
GitLab
From 3ffb52e73b47d6ad86b645942ff49035efdbcd31 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Tue, 29 Jun 2010 13:33:38 +0200
Subject: [PATCH 295/863] block: fixup missing conversion from BIO_RW_DISCARD
to REQ_DISCARD
Didn't cause a merge conflict, so fixed this one up manually
post merge.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 3531d8e1da048..3c3789492c103 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1598,7 +1598,7 @@ void submit_bio(int rw, struct bio *bio)
* If it's a regular read/write or a barrier with data attached,
* go through the normal accounting stuff before submission.
*/
- if (bio_has_data(bio) && !(rw & (1 << BIO_RW_DISCARD))) {
+ if (bio_has_data(bio) && !(rw & REQ_DISCARD)) {
if (rw & WRITE) {
count_vm_events(PGPGOUT, count);
} else {
--
GitLab
From e597cd09f711b28b8466ebdc2f12e55b44fa81e4 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 1 Jul 2010 08:24:32 +0200
Subject: [PATCH 296/863] drivers/cdrom: use pr_<level>
- add pr_fmt.
- convert printks to pr_<level>
- add if (0) and printf argument checking to cdinfo
- coalesce consecutive printks to single pr_
- fix a typo "back ground" to "background"
- convert printks without level to pr_info
- remove VIOCD_ prefixes and use pr_fmt/pr_<level>
- add a missing newline to an OS/400 message
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Folded in tab indentation fix from Andrew.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/cdrom/cdrom.c | 46 +++++++++++++-----------
drivers/cdrom/gdrom.c | 27 +++++++-------
drivers/cdrom/viocd.c | 83 ++++++++++++++++++-------------------------
3 files changed, 73 insertions(+), 83 deletions(-)
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index e3749d0ba68b5..af13c62dc473a 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -242,6 +242,8 @@
-------------------------------------------------------------------------*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define REVISION "Revision: 3.20"
#define VERSION "Id: cdrom.c 3.20 2003/12/17"
@@ -314,11 +316,17 @@ static const char *mrw_format_status[] = {
static const char *mrw_address_space[] = { "DMA", "GAA" };
#if (ERRLOGMASK!=CD_NOTHING)
-#define cdinfo(type, fmt, args...) \
- if ((ERRLOGMASK & type) || debug==1 ) \
- printk(KERN_INFO "cdrom: " fmt, ## args)
+#define cdinfo(type, fmt, args...) \
+do { \
+ if ((ERRLOGMASK & type) || debug == 1) \
+ pr_info(fmt, ##args); \
+} while (0)
#else
-#define cdinfo(type, fmt, args...)
+#define cdinfo(type, fmt, args...) \
+do { \
+ if (0 && (ERRLOGMASK & type) || debug == 1) \
+ pr_info(fmt, ##args); \
+} while (0)
#endif
/* These are used to simplify getting data in from and back to user land */
@@ -395,7 +403,7 @@ int register_cdrom(struct cdrom_device_info *cdi)
if (cdo->open == NULL || cdo->release == NULL)
return -EINVAL;
if (!banner_printed) {
- printk(KERN_INFO "Uniform CD-ROM driver " REVISION "\n");
+ pr_info("Uniform CD-ROM driver " REVISION "\n");
banner_printed = 1;
cdrom_sysctl_register();
}
@@ -546,7 +554,7 @@ static int cdrom_mrw_bgformat(struct cdrom_device_info *cdi, int cont)
unsigned char buffer[12];
int ret;
- printk(KERN_INFO "cdrom: %sstarting format\n", cont ? "Re" : "");
+ pr_info("%sstarting format\n", cont ? "Re" : "");
/*
* FmtData bit set (bit 4), format type is 1
@@ -576,7 +584,7 @@ static int cdrom_mrw_bgformat(struct cdrom_device_info *cdi, int cont)
ret = cdi->ops->generic_packet(cdi, &cgc);
if (ret)
- printk(KERN_INFO "cdrom: bgformat failed\n");
+ pr_info("bgformat failed\n");
return ret;
}
@@ -622,8 +630,7 @@ static int cdrom_mrw_exit(struct cdrom_device_info *cdi)
ret = 0;
if (di.mrw_status == CDM_MRW_BGFORMAT_ACTIVE) {
- printk(KERN_INFO "cdrom: issuing MRW back ground "
- "format suspend\n");
+ pr_info("issuing MRW background format suspend\n");
ret = cdrom_mrw_bgformat_susp(cdi, 0);
}
@@ -658,7 +665,8 @@ static int cdrom_mrw_set_lba_space(struct cdrom_device_info *cdi, int space)
if ((ret = cdrom_mode_select(cdi, &cgc)))
return ret;
- printk(KERN_INFO "cdrom: %s: mrw address space %s selected\n", cdi->name, mrw_address_space[space]);
+ pr_info("%s: mrw address space %s selected\n",
+ cdi->name, mrw_address_space[space]);
return 0;
}
@@ -762,7 +770,7 @@ static int cdrom_mrw_open_write(struct cdrom_device_info *cdi)
* always reset to DMA lba space on open
*/
if (cdrom_mrw_set_lba_space(cdi, MRW_LBA_DMA)) {
- printk(KERN_ERR "cdrom: failed setting lba address space\n");
+ pr_err("failed setting lba address space\n");
return 1;
}
@@ -781,8 +789,7 @@ static int cdrom_mrw_open_write(struct cdrom_device_info *cdi)
* 3 - MRW formatting complete
*/
ret = 0;
- printk(KERN_INFO "cdrom open: mrw_status '%s'\n",
- mrw_format_status[di.mrw_status]);
+ pr_info("open: mrw_status '%s'\n", mrw_format_status[di.mrw_status]);
if (!di.mrw_status)
ret = 1;
else if (di.mrw_status == CDM_MRW_BGFORMAT_INACTIVE &&
@@ -932,8 +939,7 @@ static void cdrom_dvd_rw_close_write(struct cdrom_device_info *cdi)
return;
}
- printk(KERN_INFO "cdrom: %s: dirty DVD+RW media, \"finalizing\"\n",
- cdi->name);
+ pr_info("%s: dirty DVD+RW media, \"finalizing\"\n", cdi->name);
init_cdrom_command(&cgc, NULL, 0, CGC_DATA_NONE);
cgc.cmd[0] = GPCMD_FLUSH_CACHE;
@@ -2176,7 +2182,7 @@ static int cdrom_read_cdda(struct cdrom_device_info *cdi, __u8 __user *ubuf,
* frame dma, so drop to single frame dma if we need to
*/
if (cdi->cdda_method == CDDA_BPC_FULL && nframes > 1) {
- printk("cdrom: dropping to single frame dma\n");
+ pr_info("dropping to single frame dma\n");
cdi->cdda_method = CDDA_BPC_SINGLE;
goto retry;
}
@@ -2189,7 +2195,7 @@ static int cdrom_read_cdda(struct cdrom_device_info *cdi, __u8 __user *ubuf,
if (cdi->last_sense != 0x04 && cdi->last_sense != 0x0b)
return ret;
- printk("cdrom: dropping to old style cdda (sense=%x)\n", cdi->last_sense);
+ pr_info("dropping to old style cdda (sense=%x)\n", cdi->last_sense);
cdi->cdda_method = CDDA_OLD;
return cdrom_read_cdda_old(cdi, ubuf, lba, nframes);
}
@@ -3401,7 +3407,7 @@ static int cdrom_print_info(const char *header, int val, char *info,
"\t%d", CDROM_CAN(val) != 0);
break;
default:
- printk(KERN_INFO "cdrom: invalid option%d\n", option);
+ pr_info("invalid option%d\n", option);
return 1;
}
if (!ret)
@@ -3491,7 +3497,7 @@ static int cdrom_sysctl_info(ctl_table *ctl, int write,
mutex_unlock(&cdrom_mutex);
return proc_dostring(ctl, write, buffer, lenp, ppos);
done:
- printk(KERN_INFO "cdrom: info buffer too small\n");
+ pr_info("info buffer too small\n");
goto doit;
}
@@ -3665,7 +3671,7 @@ static int __init cdrom_init(void)
static void __exit cdrom_exit(void)
{
- printk(KERN_INFO "Uniform CD-ROM driver unloaded\n");
+ pr_info("Uniform CD-ROM driver unloaded\n");
cdrom_sysctl_unregister();
}
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 7c05ddc63ae82..5219b57deb369 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -19,6 +19,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
@@ -339,8 +341,7 @@ static int gdrom_get_last_session(struct cdrom_device_info *cd_info,
tocuse = 0;
err = gdrom_readtoc_cmd(gd.toc, 0);
if (err) {
- printk(KERN_INFO "GDROM: Could not get CD "
- "table of contents\n");
+ pr_info("Could not get CD table of contents\n");
return -ENXIO;
}
}
@@ -357,8 +358,7 @@ static int gdrom_get_last_session(struct cdrom_device_info *cd_info,
} while (track >= fentry);
if ((track > 100) || (track < get_entry_track(gd.toc->first))) {
- printk(KERN_INFO "GDROM: No data on the last "
- "session of the CD\n");
+ pr_info("No data on the last session of the CD\n");
gdrom_getsense(NULL);
return -ENXIO;
}
@@ -451,14 +451,14 @@ static int gdrom_getsense(short *bufstring)
goto cleanup_sense;
insw(GDROM_DATA_REG, &sense, sense_command->buflen/2);
if (sense[1] & 40) {
- printk(KERN_INFO "GDROM: Drive not ready - command aborted\n");
+ pr_info("Drive not ready - command aborted\n");
goto cleanup_sense;
}
sense_key = sense[1] & 0x0F;
if (sense_key < ARRAY_SIZE(sense_texts))
- printk(KERN_INFO "GDROM: %s\n", sense_texts[sense_key].text);
+ pr_info("%s\n", sense_texts[sense_key].text);
else
- printk(KERN_ERR "GDROM: Unknown sense key: %d\n", sense_key);
+ pr_err("Unknown sense key: %d\n", sense_key);
if (bufstring) /* return addional sense data */
memcpy(bufstring, &sense[4], 2);
if (sense_key < 2)
@@ -644,13 +644,12 @@ static void gdrom_request(struct request_queue *rq)
while ((req = blk_fetch_request(rq)) != NULL) {
if (req->cmd_type != REQ_TYPE_FS) {
- printk(KERN_DEBUG "GDROM: Non-fs request ignored\n");
+ printk(KERN_DEBUG "gdrom: Non-fs request ignored\n");
__blk_end_request_all(req, -EIO);
continue;
}
if (rq_data_dir(req) != READ) {
- printk(KERN_NOTICE "GDROM: Read only device -");
- printk(" write request ignored\n");
+ pr_notice("Read only device - write request ignored\n");
__blk_end_request_all(req, -EIO);
continue;
}
@@ -685,7 +684,7 @@ static int __devinit gdrom_outputversion(void)
firmw_ver = kstrndup(id->firmver, 16, GFP_KERNEL);
if (!firmw_ver)
goto free_manuf_name;
- printk(KERN_INFO "GDROM: %s from %s with firmware %s\n",
+ pr_info("%s from %s with firmware %s\n",
model_name, manuf_name, firmw_ver);
err = 0;
kfree(firmw_ver);
@@ -757,7 +756,7 @@ static int __devinit probe_gdrom(struct platform_device *devptr)
int err;
/* Start the device */
if (gdrom_execute_diagnostic() != 1) {
- printk(KERN_WARNING "GDROM: ATA Probe for GDROM failed.\n");
+ pr_warning("ATA Probe for GDROM failed\n");
return -ENODEV;
}
/* Print out firmware ID */
@@ -767,7 +766,7 @@ static int __devinit probe_gdrom(struct platform_device *devptr)
gdrom_major = register_blkdev(0, GDROM_DEV_NAME);
if (gdrom_major <= 0)
return gdrom_major;
- printk(KERN_INFO "GDROM: Registered with major number %d\n",
+ pr_info("Registered with major number %d\n",
gdrom_major);
/* Specify basic properties of drive */
gd.cd_info = kzalloc(sizeof(struct cdrom_device_info), GFP_KERNEL);
@@ -818,7 +817,7 @@ static int __devinit probe_gdrom(struct platform_device *devptr)
unregister_blkdev(gdrom_major, GDROM_DEV_NAME);
gdrom_major = 0;
probe_fail_no_mem:
- printk(KERN_WARNING "GDROM: Probe failed - error is 0x%X\n", err);
+ pr_warning("Probe failed - error is 0x%X\n", err);
return err;
}
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 14e420168764c..1fa6628d150b7 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -31,6 +31,8 @@
* the OS/400 partition.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/cdrom.h>
@@ -53,9 +55,6 @@
#define VIOCD_VERS "1.06"
-#define VIOCD_KERN_WARNING KERN_WARNING "viocd: "
-#define VIOCD_KERN_INFO KERN_INFO "viocd: "
-
/*
* Should probably make this a module parameter....sigh
*/
@@ -202,9 +201,8 @@ static int viocd_open(struct cdrom_device_info *cdi, int purpose)
(u64)&we, VIOVERSION << 16, ((u64)device_no << 48),
0, 0, 0);
if (hvrc != 0) {
- printk(VIOCD_KERN_WARNING
- "bad rc on HvCallEvent_signalLpEventFast %d\n",
- (int)hvrc);
+ pr_warning("bad rc on HvCallEvent_signalLpEventFast %d\n",
+ (int)hvrc);
return -EIO;
}
@@ -213,8 +211,8 @@ static int viocd_open(struct cdrom_device_info *cdi, int purpose)
if (we.rc) {
const struct vio_error_entry *err =
vio_lookup_rc(viocd_err_table, we.sub_result);
- printk(VIOCD_KERN_WARNING "bad rc %d:0x%04X on open: %s\n",
- we.rc, we.sub_result, err->msg);
+ pr_warning("bad rc %d:0x%04X on open: %s\n",
+ we.rc, we.sub_result, err->msg);
return -err->errno;
}
@@ -234,9 +232,8 @@ static void viocd_release(struct cdrom_device_info *cdi)
viopath_targetinst(viopath_hostLp), 0,
VIOVERSION << 16, ((u64)device_no << 48), 0, 0, 0);
if (hvrc != 0)
- printk(VIOCD_KERN_WARNING
- "bad rc on HvCallEvent_signalLpEventFast %d\n",
- (int)hvrc);
+ pr_warning("bad rc on HvCallEvent_signalLpEventFast %d\n",
+ (int)hvrc);
}
/* Send a read or write request to OS/400 */
@@ -262,13 +259,12 @@ static int send_request(struct request *req)
sg_init_table(&sg, 1);
if (blk_rq_map_sg(req->q, req, &sg) == 0) {
- printk(VIOCD_KERN_WARNING
- "error setting up scatter/gather list\n");
+ pr_warning("error setting up scatter/gather list\n");
return -1;
}
if (dma_map_sg(diskinfo->dev, &sg, 1, direction) == 0) {
- printk(VIOCD_KERN_WARNING "error allocating sg tce\n");
+ pr_warning("error allocating sg tce\n");
return -1;
}
dmaaddr = sg_dma_address(&sg);
@@ -284,7 +280,7 @@ static int send_request(struct request *req)
((u64)DEVICE_NR(diskinfo) << 48) | dmaaddr,
(u64)blk_rq_pos(req) * 512, len, 0);
if (hvrc != HvLpEvent_Rc_Good) {
- printk(VIOCD_KERN_WARNING "hv error on op %d\n", (int)hvrc);
+ pr_warning("hv error on op %d\n", (int)hvrc);
return -1;
}
@@ -301,8 +297,7 @@ static void do_viocd_request(struct request_queue *q)
if (req->cmd_type != REQ_TYPE_FS)
__blk_end_request_all(req, -EIO);
else if (send_request(req) < 0) {
- printk(VIOCD_KERN_WARNING
- "unable to send message to OS/400!");
+ pr_warning("unable to send message to OS/400!\n");
__blk_end_request_all(req, -EIO);
} else
rwreq++;
@@ -327,8 +322,8 @@ static int viocd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
(u64)&we, VIOVERSION << 16, ((u64)device_no << 48),
0, 0, 0);
if (hvrc != 0) {
- printk(VIOCD_KERN_WARNING "bad rc on HvCallEvent_signalLpEventFast %d\n",
- (int)hvrc);
+ pr_warning("bad rc on HvCallEvent_signalLpEventFast %d\n",
+ (int)hvrc);
return -EIO;
}
@@ -338,9 +333,8 @@ static int viocd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
if (we.rc) {
const struct vio_error_entry *err =
vio_lookup_rc(viocd_err_table, we.sub_result);
- printk(VIOCD_KERN_WARNING
- "bad rc %d:0x%04X on check_change: %s; Assuming no change\n",
- we.rc, we.sub_result, err->msg);
+ pr_warning("bad rc %d:0x%04X on check_change: %s; Assuming no change\n",
+ we.rc, we.sub_result, err->msg);
return 0;
}
@@ -367,8 +361,8 @@ static int viocd_lock_door(struct cdrom_device_info *cdi, int locking)
(u64)&we, VIOVERSION << 16,
(device_no << 48) | (flags << 32), 0, 0, 0);
if (hvrc != 0) {
- printk(VIOCD_KERN_WARNING "bad rc on HvCallEvent_signalLpEventFast %d\n",
- (int)hvrc);
+ pr_warning("bad rc on HvCallEvent_signalLpEventFast %d\n",
+ (int)hvrc);
return -EIO;
}
@@ -455,8 +449,7 @@ static void vio_handle_cd_event(struct HvLpEvent *event)
return;
/* First, we should NEVER get an int here...only acks */
if (hvlpevent_is_int(event)) {
- printk(VIOCD_KERN_WARNING
- "Yikes! got an int in viocd event handler!\n");
+ pr_warning("Yikes! got an int in viocd event handler!\n");
if (hvlpevent_need_ack(event)) {
event->xRc = HvLpEvent_Rc_InvalidSubtype;
HvCallEvent_ackLpEvent(event);
@@ -510,10 +503,9 @@ static void vio_handle_cd_event(struct HvLpEvent *event)
const struct vio_error_entry *err =
vio_lookup_rc(viocd_err_table,
bevent->sub_result);
- printk(VIOCD_KERN_WARNING "request %p failed "
- "with rc %d:0x%04X: %s\n",
- req, event->xRc,
- bevent->sub_result, err->msg);
+ pr_warning("request %p failed with rc %d:0x%04X: %s\n",
+ req, event->xRc,
+ bevent->sub_result, err->msg);
__blk_end_request_all(req, -EIO);
} else
__blk_end_request_all(req, 0);
@@ -524,9 +516,8 @@ static void vio_handle_cd_event(struct HvLpEvent *event)
break;
default:
- printk(VIOCD_KERN_WARNING
- "message with invalid subtype %0x04X!\n",
- event->xSubtype & VIOMINOR_SUBTYPE_MASK);
+ pr_warning("message with invalid subtype %0x04X!\n",
+ event->xSubtype & VIOMINOR_SUBTYPE_MASK);
if (hvlpevent_need_ack(event)) {
event->xRc = HvLpEvent_Rc_InvalidSubtype;
HvCallEvent_ackLpEvent(event);
@@ -593,23 +584,19 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id)
sprintf(c->name, VIOCD_DEVICE "%c", 'a' + deviceno);
if (register_cdrom(c) != 0) {
- printk(VIOCD_KERN_WARNING "Cannot register viocd CD-ROM %s!\n",
- c->name);
+ pr_warning("Cannot register viocd CD-ROM %s!\n", c->name);
goto out;
}
- printk(VIOCD_KERN_INFO "cd %s is iSeries resource %10.10s "
- "type %4.4s, model %3.3s\n",
- c->name, d->rsrcname, d->type, d->model);
+ pr_info("cd %s is iSeries resource %10.10s type %4.4s, model %3.3s\n",
+ c->name, d->rsrcname, d->type, d->model);
q = blk_init_queue(do_viocd_request, &viocd_reqlock);
if (q == NULL) {
- printk(VIOCD_KERN_WARNING "Cannot allocate queue for %s!\n",
- c->name);
+ pr_warning("Cannot allocate queue for %s!\n", c->name);
goto out_unregister_cdrom;
}
gendisk = alloc_disk(1);
if (gendisk == NULL) {
- printk(VIOCD_KERN_WARNING "Cannot create gendisk for %s!\n",
- c->name);
+ pr_warning("Cannot create gendisk for %s!\n", c->name);
goto out_cleanup_queue;
}
gendisk->major = VIOCD_MAJOR;
@@ -682,21 +669,19 @@ static int __init viocd_init(void)
return -ENODEV;
}
- printk(VIOCD_KERN_INFO "vers " VIOCD_VERS ", hosting partition %d\n",
- viopath_hostLp);
+ pr_info("vers " VIOCD_VERS ", hosting partition %d\n", viopath_hostLp);
if (register_blkdev(VIOCD_MAJOR, VIOCD_DEVICE) != 0) {
- printk(VIOCD_KERN_WARNING "Unable to get major %d for %s\n",
- VIOCD_MAJOR, VIOCD_DEVICE);
+ pr_warning("Unable to get major %d for %s\n",
+ VIOCD_MAJOR, VIOCD_DEVICE);
return -EIO;
}
ret = viopath_open(viopath_hostLp, viomajorsubtype_cdio,
MAX_CD_REQ + 2);
if (ret) {
- printk(VIOCD_KERN_WARNING
- "error opening path to host partition %d\n",
- viopath_hostLp);
+ pr_warning("error opening path to host partition %d\n",
+ viopath_hostLp);
goto out_unregister;
}
--
GitLab
From 28018c242a4ec7017bbbf81d2d3952f820a27118 Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@suse.de>
Date: Thu, 1 Jul 2010 19:49:17 +0900
Subject: [PATCH 297/863] block: implement an unprep function corresponding
directly to prep
Reviewed-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-core.c | 25 +++++++++++++++++++++++++
block/blk-settings.c | 17 +++++++++++++++++
drivers/scsi/scsi_lib.c | 2 +-
include/linux/blkdev.h | 4 ++++
4 files changed, 47 insertions(+), 1 deletion(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 3c3789492c103..5ab3ac22930ce 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -608,6 +608,7 @@ blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn,
q->request_fn = rfn;
q->prep_rq_fn = NULL;
+ q->unprep_rq_fn = NULL;
q->unplug_fn = generic_unplug_device;
q->queue_flags = QUEUE_FLAG_DEFAULT;
q->queue_lock = lock;
@@ -2133,6 +2134,26 @@ static bool blk_update_bidi_request(struct request *rq, int error,
return false;
}
+/**
+ * blk_unprep_request - unprepare a request
+ * @req: the request
+ *
+ * This function makes a request ready for complete resubmission (or
+ * completion). It happens only after all error handling is complete,
+ * so represents the appropriate moment to deallocate any resources
+ * that were allocated to the request in the prep_rq_fn. The queue
+ * lock is held when calling this.
+ */
+void blk_unprep_request(struct request *req)
+{
+ struct request_queue *q = req->q;
+
+ req->cmd_flags &= ~REQ_DONTPREP;
+ if (q->unprep_rq_fn)
+ q->unprep_rq_fn(q, req);
+}
+EXPORT_SYMBOL_GPL(blk_unprep_request);
+
/*
* queue lock must be held
*/
@@ -2148,6 +2169,10 @@ static void blk_finish_request(struct request *req, int error)
blk_delete_timer(req);
+ if (req->cmd_flags & REQ_DONTPREP)
+ blk_unprep_request(req);
+
+
blk_account_io_done(req);
if (req->end_io)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index f5ed5a1187ba8..a234f4bf1d6ff 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -36,6 +36,23 @@ void blk_queue_prep_rq(struct request_queue *q, prep_rq_fn *pfn)
}
EXPORT_SYMBOL(blk_queue_prep_rq);
+/**
+ * blk_queue_unprep_rq - set an unprepare_request function for queue
+ * @q: queue
+ * @ufn: unprepare_request function
+ *
+ * It's possible for a queue to register an unprepare_request callback
+ * which is invoked before the request is finally completed. The goal
+ * of the function is to deallocate any data that was allocated in the
+ * prepare_request callback.
+ *
+ */
+void blk_queue_unprep_rq(struct request_queue *q, unprep_rq_fn *ufn)
+{
+ q->unprep_rq_fn = ufn;
+}
+EXPORT_SYMBOL(blk_queue_unprep_rq);
+
/**
* blk_queue_merge_bvec - set a merge_bvec function for queue
* @q: queue
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 5f1160841b0e1..ee836193f5312 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -85,7 +85,7 @@ static void scsi_unprep_request(struct request *req)
{
struct scsi_cmnd *cmd = req->special;
- req->cmd_flags &= ~REQ_DONTPREP;
+ blk_unprep_request(req);
req->special = NULL;
scsi_put_command(cmd);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 204fbe22354d9..6bba04c7ec48f 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -200,6 +200,7 @@ struct request_pm_state
typedef void (request_fn_proc) (struct request_queue *q);
typedef int (make_request_fn) (struct request_queue *q, struct bio *bio);
typedef int (prep_rq_fn) (struct request_queue *, struct request *);
+typedef void (unprep_rq_fn) (struct request_queue *, struct request *);
typedef void (unplug_fn) (struct request_queue *);
struct bio_vec;
@@ -282,6 +283,7 @@ struct request_queue
request_fn_proc *request_fn;
make_request_fn *make_request_fn;
prep_rq_fn *prep_rq_fn;
+ unprep_rq_fn *unprep_rq_fn;
unplug_fn *unplug_fn;
merge_bvec_fn *merge_bvec_fn;
prepare_flush_fn *prepare_flush_fn;
@@ -841,6 +843,7 @@ extern void blk_complete_request(struct request *);
extern void __blk_complete_request(struct request *);
extern void blk_abort_request(struct request *);
extern void blk_abort_queue(struct request_queue *);
+extern void blk_unprep_request(struct request *);
/*
* Access functions for manipulating queue properties
@@ -885,6 +888,7 @@ extern int blk_queue_dma_drain(struct request_queue *q,
extern void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn);
extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn);
+extern void blk_queue_unprep_rq(struct request_queue *, unprep_rq_fn *ufn);
extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *);
extern void blk_queue_dma_alignment(struct request_queue *, int);
extern void blk_queue_update_dma_alignment(struct request_queue *, int);
--
GitLab
From f1126e950d28ff875d96ed6a04a9ff96c7bfc357 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 1 Jul 2010 19:49:18 +0900
Subject: [PATCH 298/863] scsi: add sd_unprep_fn to free discard page
This fixes discard page leak by using q->unprep_rq_fn facility.
q->unprep_rq_fn is called when all the data buffer (req->bio and
scsi_data_buffer) in the request is freed.
sd_unprep() uses rq->buffer to free discard page allocated in
sd_prepare_discard().
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/sd.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 86da819c70eb1..2d4e3a865f39d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -425,6 +425,7 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
sector_t sector = bio->bi_sector;
unsigned int nr_sectors = bio_sectors(bio);
unsigned int len;
+ int ret;
struct page *page;
if (sdkp->device->sector_size == 4096) {
@@ -465,7 +466,15 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
}
blk_add_request_payload(rq, page, len);
- return scsi_setup_blk_pc_cmnd(sdp, rq);
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ rq->buffer = page_address(page);
+ return ret;
+}
+
+static void sd_unprep_fn(struct request_queue *q, struct request *rq)
+{
+ if (rq->cmd_flags & REQ_DISCARD)
+ __free_page(virt_to_page(rq->buffer));
}
/**
@@ -2242,6 +2251,7 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
sd_revalidate_disk(gd);
blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
+ blk_queue_unprep_rq(sdp->request_queue, sd_unprep_fn);
gd->driverfs_dev = &sdp->sdev_gendev;
gd->flags = GENHD_FL_EXT_DEVT;
--
GitLab
From 802447c1c0513a0ea0e29d6bda23b19ac0686654 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 1 Jul 2010 19:49:19 +0900
Subject: [PATCH 299/863] scsi: remove unused free discard page in sd_done
- sd_done isn't called for pc request so we never call the code.
- we use sd_unprep to free discard page now.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/sd.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2d4e3a865f39d..aa6b48ba78b10 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1179,15 +1179,6 @@ static int sd_done(struct scsi_cmnd *SCpnt)
int sense_valid = 0;
int sense_deferred = 0;
- /*
- * If this is a discard request that originated from the kernel
- * we need to free our payload here. Note that we need to check
- * the request flag as the normal payload rules apply for
- * pass-through UNMAP / WRITE SAME requests.
- */
- if (SCpnt->request->cmd_flags & REQ_DISCARD)
- __free_page(bio_page(SCpnt->request->bio));
-
if (result) {
sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
if (sense_valid)
--
GitLab
From 8749534fe6826596b71bc409c872b047a8e2755b Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:32 +0900
Subject: [PATCH 300/863] block: introduce REQ_FLUSH flag
SCSI-ml needs a way to mark a request as flush request in
q->prepare_flush_fn because it needs to identify them later (e.g. in
q->request_fn or prep_rq_fn).
queue_flush sets REQ_HARDBARRIER in rq->cmd_flags however the block
layer also sends normal REQ_TYPE_FS requests with REQ_HARDBARRIER. So
SCSI-ml can't use REQ_HARDBARRIER to identify flush requests.
We could change the block layer to clear REQ_HARDBARRIER bit before
sending non flush requests to the lower layers. However, intorudcing
the new flag looks cleaner (surely easier).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alasdair G Kergon <agk@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-barrier.c | 2 +-
include/linux/bio.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 7c6f4a714687e..a3482425c507a 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -143,7 +143,7 @@ static void queue_flush(struct request_queue *q, unsigned which)
}
blk_rq_init(q, rq);
- rq->cmd_flags = REQ_HARDBARRIER;
+ rq->cmd_flags = REQ_HARDBARRIER | REQ_FLUSH;
rq->rq_disk = q->bar_rq.rq_disk;
rq->end_io = end_io;
q->prepare_flush_fn(q, rq);
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 4d379c8250aea..f655b54c9ef3c 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -174,6 +174,7 @@ enum rq_flag_bits {
__REQ_ALLOCED, /* request came from our alloc pool */
__REQ_COPY_USER, /* contains copies of user pages */
__REQ_INTEGRITY, /* integrity metadata has been remapped */
+ __REQ_FLUSH, /* request for cache flush */
__REQ_IO_STAT, /* account I/O stat */
__REQ_MIXED_MERGE, /* merge of different types, fail separately */
__REQ_NR_BITS, /* stops here */
@@ -213,6 +214,7 @@ enum rq_flag_bits {
#define REQ_ALLOCED (1 << __REQ_ALLOCED)
#define REQ_COPY_USER (1 << __REQ_COPY_USER)
#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
+#define REQ_FLUSH (1 << __REQ_FLUSH)
#define REQ_IO_STAT (1 << __REQ_IO_STAT)
#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE)
--
GitLab
From b6a903151d05e3912ab66b186f74c61851efb88c Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:33 +0900
Subject: [PATCH 301/863] block: permit PREFLUSH and POSTFLUSH without
prepare_flush_fn
This is preparation for removing q->prepare_flush_fn.
Temporarily, blk_queue_ordered() permits QUEUE_ORDERED_DO_PREFLUSH and
QUEUE_ORDERED_DO_POSTFLUSH without prepare_flush_fn.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-barrier.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index a3482425c507a..7ce0a32a21fd2 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -25,12 +25,6 @@
int blk_queue_ordered(struct request_queue *q, unsigned ordered,
prepare_flush_fn *prepare_flush_fn)
{
- if (!prepare_flush_fn && (ordered & (QUEUE_ORDERED_DO_PREFLUSH |
- QUEUE_ORDERED_DO_POSTFLUSH))) {
- printk(KERN_ERR "%s: prepare_flush_fn required\n", __func__);
- return -EINVAL;
- }
-
if (ordered != QUEUE_ORDERED_NONE &&
ordered != QUEUE_ORDERED_DRAIN &&
ordered != QUEUE_ORDERED_DRAIN_FLUSH &&
@@ -146,7 +140,8 @@ static void queue_flush(struct request_queue *q, unsigned which)
rq->cmd_flags = REQ_HARDBARRIER | REQ_FLUSH;
rq->rq_disk = q->bar_rq.rq_disk;
rq->end_io = end_io;
- q->prepare_flush_fn(q, rq);
+ if (q->prepare_flush_fn)
+ q->prepare_flush_fn(q, rq);
elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
}
--
GitLab
From 90467c294aba7f911bdae72ed86995cf1de4d364 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:34 +0900
Subject: [PATCH 302/863] scsi: stop using q->prepare_flush_fn
scsi-ml builds flush requests via q->prepare_flush_fn(), however,
builds discard requests via q->prep_rq_fn.
Using two different mechnisms for the similar requests (building
commands in SCSI ULD) doesn't make sense.
Handing both via q->prep_rq_fn makes the code design simpler.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/sd.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index aa6b48ba78b10..e8c295e01466d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -471,6 +471,18 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
return ret;
}
+static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
+{
+ /* for now, we use REQ_TYPE_BLOCK_PC. */
+ rq->cmd_type = REQ_TYPE_BLOCK_PC;
+ rq->timeout = SD_TIMEOUT;
+ rq->retries = SD_MAX_RETRIES;
+ rq->cmd[0] = SYNCHRONIZE_CACHE;
+ rq->cmd_len = 10;
+
+ return scsi_setup_blk_pc_cmnd(sdp, rq);
+}
+
static void sd_unprep_fn(struct request_queue *q, struct request *rq)
{
if (rq->cmd_flags & REQ_DISCARD)
@@ -504,6 +516,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
if (rq->cmd_flags & REQ_DISCARD) {
ret = scsi_setup_discard_cmnd(sdp, rq);
goto out;
+ } else if (rq->cmd_flags & REQ_FLUSH) {
+ ret = scsi_setup_flush_cmnd(sdp, rq);
+ goto out;
} else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
goto out;
@@ -1053,15 +1068,6 @@ static int sd_sync_cache(struct scsi_disk *sdkp)
return 0;
}
-static void sd_prepare_flush(struct request_queue *q, struct request *rq)
-{
- rq->cmd_type = REQ_TYPE_BLOCK_PC;
- rq->timeout = SD_TIMEOUT;
- rq->retries = SD_MAX_RETRIES;
- rq->cmd[0] = SYNCHRONIZE_CACHE;
- rq->cmd_len = 10;
-}
-
static void sd_rescan(struct device *dev)
{
struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
@@ -2129,7 +2135,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
else
ordered = QUEUE_ORDERED_DRAIN;
- blk_queue_ordered(sdkp->disk->queue, ordered, sd_prepare_flush);
+ blk_queue_ordered(sdkp->disk->queue, ordered, NULL);
set_capacity(disk, sdkp->capacity);
kfree(buffer);
--
GitLab
From 7f9815f09dc201f2205981c11fadcf82a9e3cc42 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:35 +0900
Subject: [PATCH 303/863] osdblk: stop using q->prepare_flush_fn
use REQ_FLUSH flag instead.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/osdblk.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index 819002ba34338..9639565a9a6a0 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -323,7 +323,7 @@ static void osdblk_rq_fn(struct request_queue *q)
* driver-specific, etc.
*/
- do_flush = (rq->special == (void *) 0xdeadbeefUL);
+ do_flush = rq->cmd_flags & REQ_FLUSH;
do_write = (rq_data_dir(rq) == WRITE);
if (!do_flush) { /* osd_flush does not use a bio */
@@ -380,14 +380,6 @@ static void osdblk_rq_fn(struct request_queue *q)
}
}
-static void osdblk_prepare_flush(struct request_queue *q, struct request *rq)
-{
- /* add driver-specific marker, to indicate that this request
- * is a flush command
- */
- rq->special = (void *) 0xdeadbeefUL;
-}
-
static void osdblk_free_disk(struct osdblk_device *osdev)
{
struct gendisk *disk = osdev->disk;
@@ -447,7 +439,7 @@ static int osdblk_init_disk(struct osdblk_device *osdev)
blk_queue_stack_limits(q, osd_request_queue(osdev->osd));
blk_queue_prep_rq(q, blk_queue_start_tag);
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, NULL);
disk->queue = q;
--
GitLab
From 98d8c8f40ed72d997e50bc107a5cc1a6cee19e76 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:36 +0900
Subject: [PATCH 304/863] ps3disk: stop using q->prepare_flush_fn
REQ_FLUSH flag enables us to kill ps3disk_prepare_flush().
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/ps3disk.c | 25 ++++++-------------------
1 file changed, 6 insertions(+), 19 deletions(-)
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index 5f208c0bf1563..ab528a480f986 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -196,13 +196,12 @@ static void ps3disk_do_request(struct ps3_storage_device *dev,
dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__);
while ((req = blk_fetch_request(q))) {
- if (req->cmd_type == REQ_TYPE_FS) {
- if (ps3disk_submit_request_sg(dev, req))
- break;
- } else if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
- req->cmd[0] == REQ_LB_OP_FLUSH) {
+ if (req->cmd_flags & REQ_FLUSH) {
if (ps3disk_submit_flush_request(dev, req))
break;
+ } else if (req->cmd_type == REQ_TYPE_FS) {
+ if (ps3disk_submit_request_sg(dev, req))
+ break;
} else {
blk_dump_rq_flags(req, DEVICE_NAME " bad request");
__blk_end_request_all(req, -EIO);
@@ -257,8 +256,7 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data)
return IRQ_HANDLED;
}
- if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
- req->cmd[0] == REQ_LB_OP_FLUSH) {
+ if (req->cmd_flags & REQ_FLUSH) {
read = 0;
op = "flush";
} else {
@@ -398,16 +396,6 @@ static int ps3disk_identify(struct ps3_storage_device *dev)
return 0;
}
-static void ps3disk_prepare_flush(struct request_queue *q, struct request *req)
-{
- struct ps3_storage_device *dev = q->queuedata;
-
- dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__);
-
- req->cmd_type = REQ_TYPE_LINUX_BLOCK;
- req->cmd[0] = REQ_LB_OP_FLUSH;
-}
-
static unsigned long ps3disk_mask;
static DEFINE_MUTEX(ps3disk_mask_mutex);
@@ -480,8 +468,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
blk_queue_dma_alignment(queue, dev->blk_size-1);
blk_queue_logical_block_size(queue, dev->blk_size);
- blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH,
- ps3disk_prepare_flush);
+ blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH, NULL);
blk_queue_max_segments(queue, -1);
blk_queue_max_segment_size(queue, dev->bounce_size);
--
GitLab
From 144d6ed551ce430084489b198826c89bac5680dc Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:37 +0900
Subject: [PATCH 305/863] dm: stop using q->prepare_flush_fn
use REQ_FLUSH flag instead.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Alasdair G Kergon <agk@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/md/dm.c | 16 ++--------------
1 file changed, 2 insertions(+), 14 deletions(-)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index d6f77baeafd60..00c8105518145 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1455,20 +1455,9 @@ static int dm_request(struct request_queue *q, struct bio *bio)
return _dm_request(q, bio);
}
-/*
- * Mark this request as flush request, so that dm_request_fn() can
- * recognize.
- */
-static void dm_rq_prepare_flush(struct request_queue *q, struct request *rq)
-{
- rq->cmd_type = REQ_TYPE_LINUX_BLOCK;
- rq->cmd[0] = REQ_LB_OP_FLUSH;
-}
-
static bool dm_rq_is_flush_request(struct request *rq)
{
- if (rq->cmd_type == REQ_TYPE_LINUX_BLOCK &&
- rq->cmd[0] == REQ_LB_OP_FLUSH)
+ if (rq->cmd_flags & REQ_FLUSH)
return true;
else
return false;
@@ -1912,8 +1901,7 @@ static struct mapped_device *alloc_dev(int minor)
blk_queue_softirq_done(md->queue, dm_softirq_done);
blk_queue_prep_rq(md->queue, dm_prep_fn);
blk_queue_lld_busy(md->queue, dm_lld_busy);
- blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH,
- dm_rq_prepare_flush);
+ blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH, NULL);
md->disk = alloc_disk(1);
if (!md->disk)
--
GitLab
From dd40e456a40ebb87330b7fc694359ce52f1996aa Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:38 +0900
Subject: [PATCH 306/863] virtio_blk: stop using q->prepare_flush_fn
use REQ_FLUSH flag instead.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/virtio_blk.c | 50 ++++++++++++++++----------------------
1 file changed, 21 insertions(+), 29 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index b5ebcd33bdb61..b277f9e6abac8 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -99,33 +99,32 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
return false;
vbr->req = req;
- switch (req->cmd_type) {
- case REQ_TYPE_FS:
- vbr->out_hdr.type = 0;
- vbr->out_hdr.sector = blk_rq_pos(vbr->req);
- vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
- break;
- case REQ_TYPE_BLOCK_PC:
- vbr->out_hdr.type = VIRTIO_BLK_T_SCSI_CMD;
- vbr->out_hdr.sector = 0;
- vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
- break;
- case REQ_TYPE_SPECIAL:
- vbr->out_hdr.type = VIRTIO_BLK_T_GET_ID;
+
+ if (req->cmd_flags & REQ_FLUSH) {
+ vbr->out_hdr.type = VIRTIO_BLK_T_FLUSH;
vbr->out_hdr.sector = 0;
vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
- break;
- case REQ_TYPE_LINUX_BLOCK:
- if (req->cmd[0] == REQ_LB_OP_FLUSH) {
- vbr->out_hdr.type = VIRTIO_BLK_T_FLUSH;
+ } else {
+ switch (req->cmd_type) {
+ case REQ_TYPE_FS:
+ vbr->out_hdr.type = 0;
+ vbr->out_hdr.sector = blk_rq_pos(vbr->req);
+ vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
+ break;
+ case REQ_TYPE_BLOCK_PC:
+ vbr->out_hdr.type = VIRTIO_BLK_T_SCSI_CMD;
vbr->out_hdr.sector = 0;
vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
break;
+ case REQ_TYPE_SPECIAL:
+ vbr->out_hdr.type = VIRTIO_BLK_T_GET_ID;
+ vbr->out_hdr.sector = 0;
+ vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
+ break;
+ default:
+ /* We don't put anything else in the queue. */
+ BUG();
}
- /*FALLTHRU*/
- default:
- /* We don't put anything else in the queue. */
- BUG();
}
if (vbr->req->cmd_flags & REQ_HARDBARRIER)
@@ -195,12 +194,6 @@ static void do_virtblk_request(struct request_queue *q)
virtqueue_kick(vblk->vq);
}
-static void virtblk_prepare_flush(struct request_queue *q, struct request *req)
-{
- req->cmd_type = REQ_TYPE_LINUX_BLOCK;
- req->cmd[0] = REQ_LB_OP_FLUSH;
-}
-
/* return id (s/n) string for *disk to *id_str
*/
static int virtblk_get_id(struct gendisk *disk, char *id_str)
@@ -373,8 +366,7 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
/* If barriers are supported, tell block layer that queue is ordered */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH,
- virtblk_prepare_flush);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, NULL);
else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL);
--
GitLab
From afc23068103ccfbf1917eb2a007bc15ab5418cc9 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:39 +0900
Subject: [PATCH 307/863] ide: stop using q->prepare_flush_fn
use REQ_FLUSH flag instead.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/ide/ide-disk.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index df3d91ba1c96a..c22e6226e9e94 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -427,10 +427,15 @@ static void ide_disk_unlock_native_capacity(ide_drive_t *drive)
drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */
}
-static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
+static int idedisk_prep_fn(struct request_queue *q, struct request *rq)
{
ide_drive_t *drive = q->queuedata;
- struct ide_cmd *cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC);
+ struct ide_cmd *cmd;
+
+ if (!(rq->cmd_flags & REQ_FLUSH))
+ return BLKPREP_OK;
+
+ cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC);
/* FIXME: map struct ide_taskfile on rq->cmd[] */
BUG_ON(cmd == NULL);
@@ -448,6 +453,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
rq->special = cmd;
cmd->rq = rq;
+
+ return BLKPREP_OK;
}
ide_devset_get(multcount, mult_count);
@@ -513,7 +520,6 @@ static void update_ordered(ide_drive_t *drive)
{
u16 *id = drive->id;
unsigned ordered = QUEUE_ORDERED_NONE;
- prepare_flush_fn *prep_fn = NULL;
if (drive->dev_flags & IDE_DFLAG_WCACHE) {
unsigned long long capacity;
@@ -538,12 +544,12 @@ static void update_ordered(ide_drive_t *drive)
if (barrier) {
ordered = QUEUE_ORDERED_DRAIN_FLUSH;
- prep_fn = idedisk_prepare_flush;
+ blk_queue_prep_rq(drive->queue, idedisk_prep_fn);
}
} else
ordered = QUEUE_ORDERED_DRAIN;
- blk_queue_ordered(drive->queue, ordered, prep_fn);
+ blk_queue_ordered(drive->queue, ordered, NULL);
}
ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
--
GitLab
From 00fff26539bfe3fad21c164fc4002d9ede056fb0 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 17:45:40 +0900
Subject: [PATCH 308/863] block: remove q->prepare_flush_fn completely
This removes q->prepare_flush_fn completely (changes the
blk_queue_ordered API).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-barrier.c | 7 +------
drivers/block/brd.c | 2 +-
drivers/block/loop.c | 2 +-
drivers/block/osdblk.c | 2 +-
drivers/block/ps3disk.c | 2 +-
drivers/block/virtio_blk.c | 4 ++--
drivers/block/xen-blkfront.c | 3 +--
drivers/ide/ide-disk.c | 2 +-
drivers/md/dm.c | 2 +-
drivers/mmc/card/queue.c | 2 +-
drivers/s390/block/dasd.c | 2 +-
drivers/scsi/sd.c | 2 +-
include/linux/blkdev.h | 4 +---
13 files changed, 14 insertions(+), 22 deletions(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 7ce0a32a21fd2..eefbde8353089 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -13,7 +13,6 @@
* blk_queue_ordered - does this queue support ordered writes
* @q: the request queue
* @ordered: one of QUEUE_ORDERED_*
- * @prepare_flush_fn: rq setup helper for cache flush ordered writes
*
* Description:
* For journalled file systems, doing ordered writes on a commit
@@ -22,8 +21,7 @@
* feature should call this function and indicate so.
*
**/
-int blk_queue_ordered(struct request_queue *q, unsigned ordered,
- prepare_flush_fn *prepare_flush_fn)
+int blk_queue_ordered(struct request_queue *q, unsigned ordered)
{
if (ordered != QUEUE_ORDERED_NONE &&
ordered != QUEUE_ORDERED_DRAIN &&
@@ -38,7 +36,6 @@ int blk_queue_ordered(struct request_queue *q, unsigned ordered,
q->ordered = ordered;
q->next_ordered = ordered;
- q->prepare_flush_fn = prepare_flush_fn;
return 0;
}
@@ -140,8 +137,6 @@ static void queue_flush(struct request_queue *q, unsigned which)
rq->cmd_flags = REQ_HARDBARRIER | REQ_FLUSH;
rq->rq_disk = q->bar_rq.rq_disk;
rq->end_io = end_io;
- if (q->prepare_flush_fn)
- q->prepare_flush_fn(q, rq);
elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
}
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 1b218c6b68205..1d2c18620f9a2 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -479,7 +479,7 @@ static struct brd_device *brd_alloc(int i)
if (!brd->brd_queue)
goto out_free_dev;
blk_queue_make_request(brd->brd_queue, brd_make_request);
- blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
+ blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG);
blk_queue_max_hw_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index fedfdb7d3cdfa..d285a5481965d 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -831,7 +831,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
lo->lo_queue->unplug_fn = loop_unplug;
if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
- blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN, NULL);
+ blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN);
set_capacity(lo->lo_disk, size);
bd_set_size(bdev, size << 9);
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index 9639565a9a6a0..2284b4f05c62f 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -439,7 +439,7 @@ static int osdblk_init_disk(struct osdblk_device *osdev)
blk_queue_stack_limits(q, osd_request_queue(osdev->osd));
blk_queue_prep_rq(q, blk_queue_start_tag);
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, NULL);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH);
disk->queue = q;
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index ab528a480f986..e9da874d04192 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -468,7 +468,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
blk_queue_dma_alignment(queue, dev->blk_size-1);
blk_queue_logical_block_size(queue, dev->blk_size);
- blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH, NULL);
+ blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH);
blk_queue_max_segments(queue, -1);
blk_queue_max_segment_size(queue, dev->bounce_size);
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index b277f9e6abac8..0a3222fd44422 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -366,9 +366,9 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
/* If barriers are supported, tell block layer that queue is ordered */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, NULL);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH);
else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
- blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL);
+ blk_queue_ordered(q, QUEUE_ORDERED_TAG);
/* If disk is read-only in the host, the guest should obey */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 495533e665428..76af65b654e3f 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -373,8 +373,7 @@ static int xlvbd_barrier(struct blkfront_info *info)
int err;
err = blk_queue_ordered(info->rq,
- info->feature_barrier ? QUEUE_ORDERED_DRAIN : QUEUE_ORDERED_NONE,
- NULL);
+ info->feature_barrier ? QUEUE_ORDERED_DRAIN : QUEUE_ORDERED_NONE);
if (err)
return err;
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index c22e6226e9e94..7433e07de30ed 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -549,7 +549,7 @@ static void update_ordered(ide_drive_t *drive)
} else
ordered = QUEUE_ORDERED_DRAIN;
- blk_queue_ordered(drive->queue, ordered, NULL);
+ blk_queue_ordered(drive->queue, ordered);
}
ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 00c8105518145..d505a96845c11 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1901,7 +1901,7 @@ static struct mapped_device *alloc_dev(int minor)
blk_queue_softirq_done(md->queue, dm_softirq_done);
blk_queue_prep_rq(md->queue, dm_prep_fn);
blk_queue_lld_busy(md->queue, dm_lld_busy);
- blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH, NULL);
+ blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH);
md->disk = alloc_disk(1);
if (!md->disk)
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index ec92bcbdeddbb..c77eb49eda0ea 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -128,7 +128,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
mq->req = NULL;
blk_queue_prep_rq(mq->queue, mmc_prep_request);
- blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN, NULL);
+ blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN);
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
#ifdef CONFIG_MMC_BLOCK_BOUNCE
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 33975e922d652..17b033d0e0502 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2196,7 +2196,7 @@ static void dasd_setup_queue(struct dasd_block *block)
*/
blk_queue_max_segment_size(block->request_queue, PAGE_SIZE);
blk_queue_segment_boundary(block->request_queue, PAGE_SIZE - 1);
- blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN, NULL);
+ blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN);
}
/*
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e8c295e01466d..d9a4314a19482 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2135,7 +2135,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
else
ordered = QUEUE_ORDERED_DRAIN;
- blk_queue_ordered(sdkp->disk->queue, ordered, NULL);
+ blk_queue_ordered(sdkp->disk->queue, ordered);
set_capacity(disk, sdkp->capacity);
kfree(buffer);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6bba04c7ec48f..3a2c5d9a92883 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -212,7 +212,6 @@ struct bvec_merge_data {
};
typedef int (merge_bvec_fn) (struct request_queue *, struct bvec_merge_data *,
struct bio_vec *);
-typedef void (prepare_flush_fn) (struct request_queue *, struct request *);
typedef void (softirq_done_fn)(struct request *);
typedef int (dma_drain_needed_fn)(struct request *);
typedef int (lld_busy_fn) (struct request_queue *q);
@@ -286,7 +285,6 @@ struct request_queue
unprep_rq_fn *unprep_rq_fn;
unplug_fn *unplug_fn;
merge_bvec_fn *merge_bvec_fn;
- prepare_flush_fn *prepare_flush_fn;
softirq_done_fn *softirq_done_fn;
rq_timed_out_fn *rq_timed_out_fn;
dma_drain_needed_fn *dma_drain_needed;
@@ -896,7 +894,7 @@ extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
-extern int blk_queue_ordered(struct request_queue *, unsigned, prepare_flush_fn *);
+extern int blk_queue_ordered(struct request_queue *, unsigned);
extern bool blk_do_ordered(struct request_queue *, struct request **);
extern unsigned blk_ordered_cur_seq(struct request_queue *);
extern unsigned blk_ordered_req_seq(struct request *);
--
GitLab
From 82b6d57fb11644fe25c8a1346627ad0027673dae Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 3 Jul 2010 08:07:04 -0600
Subject: [PATCH 309/863] scsi: need to reset unprep_rq_fn in sd_remove
This is for block's for-2.6.36.
We need to reset q->unprep_rq_fn in sd_remove. Otherwise we hit kernel
oops if we access to a scsi disk device via sg after removing scsi
disk module.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/sd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index d9a4314a19482..0994ab63b5987 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2384,6 +2384,7 @@ static int sd_remove(struct device *dev)
async_synchronize_full();
sdkp = dev_get_drvdata(dev);
blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
+ blk_queue_unprep_rq(sdkp->device->request_queue, NULL);
device_del(&sdkp->dev);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
--
GitLab
From a89f5c899db3c6be4bb426e4efb72ecee29a93b5 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 6 Jul 2010 09:03:18 +0200
Subject: [PATCH 310/863] block: remove unused REQ_TYPE_LINUX_BLOCK
Nobody uses REQ_TYPE_LINUX_BLOCK (and its REQ_LB_OP_*).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/blkdev.h | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3a2c5d9a92883..baf5258f59859 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -60,7 +60,6 @@ enum rq_cmd_type_bits {
REQ_TYPE_PM_RESUME, /* resume request */
REQ_TYPE_PM_SHUTDOWN, /* shutdown request */
REQ_TYPE_SPECIAL, /* driver defined type */
- REQ_TYPE_LINUX_BLOCK, /* generic block layer message */
/*
* for ATA/ATAPI devices. this really doesn't belong here, ide should
* use REQ_TYPE_SPECIAL and use rq->cmd[0] with the range of driver
@@ -70,20 +69,6 @@ enum rq_cmd_type_bits {
REQ_TYPE_ATA_PC,
};
-/*
- * For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being
- * sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a
- * SCSI cdb.
- *
- * 0x00 -> 0x3f are driver private, to be used for whatever purpose they need,
- * typically to differentiate REQ_TYPE_SPECIAL requests.
- *
- */
-enum {
- REQ_LB_OP_EJECT = 0x40, /* eject request */
- REQ_LB_OP_FLUSH = 0x41, /* flush request */
-};
-
#define BLK_MAX_CDB 16
/*
--
GitLab
From 455b2864686d3591b3b2f39eb46290c95f76471f Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Wed, 7 Jul 2010 13:24:06 +1000
Subject: [PATCH 311/863] writeback: Initial tracing support
Trace queue/sched/exec parts of the writeback loop. This provides
insight into when and why flusher threads are scheduled to run. e.g
a sync invocation leaves traces like:
sync-[...]: writeback_queue: bdi 8:0: sb_dev 8:1 nr_pages=7712 sync_mode=0 kupdate=0 range_cyclic=0 background=0
flush-8:0-[...]: writeback_exec: bdi 8:0: sb_dev 8:1 nr_pages=7712 sync_mode=0 kupdate=0 range_cyclic=0 background=0
This also lays the foundation for adding more writeback tracing to
provide deeper insight into the whole writeback path.
The original tracing code is from Jens Axboe, though this version is
a rewrite as a result of the code being traced changing
significantly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 38 ++++++++++---
include/trace/events/writeback.h | 91 ++++++++++++++++++++++++++++++++
mm/backing-dev.c | 3 ++
3 files changed, 124 insertions(+), 8 deletions(-)
create mode 100644 include/trace/events/writeback.h
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index c8471b3ddccfa..73acab4dc2b7a 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -26,15 +26,9 @@
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/buffer_head.h>
+#include <linux/tracepoint.h>
#include "internal.h"
-#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
-
-/*
- * We don't actually have pdflush, but this one is exported though /proc...
- */
-int nr_pdflush_threads;
-
/*
* Passed into wb_writeback(), essentially a subset of writeback_control
*/
@@ -50,6 +44,21 @@ struct wb_writeback_work {
struct completion *done; /* set if the caller waits */
};
+/*
+ * Include the creation of the trace points after defining the
+ * wb_writeback_work structure so that the definition remains local to this
+ * file.
+ */
+#define CREATE_TRACE_POINTS
+#include <trace/events/writeback.h>
+
+#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
+
+/*
+ * We don't actually have pdflush, but this one is exported though /proc...
+ */
+int nr_pdflush_threads;
+
/**
* writeback_in_progress - determine whether there is writeback in progress
* @bdi: the device's backing_dev_info structure.
@@ -65,6 +74,8 @@ int writeback_in_progress(struct backing_dev_info *bdi)
static void bdi_queue_work(struct backing_dev_info *bdi,
struct wb_writeback_work *work)
{
+ trace_writeback_queue(bdi, work);
+
spin_lock(&bdi->wb_lock);
list_add_tail(&work->list, &bdi->work_list);
spin_unlock(&bdi->wb_lock);
@@ -74,6 +85,7 @@ static void bdi_queue_work(struct backing_dev_info *bdi,
* it gets created and wakes up, we'll run this work.
*/
if (unlikely(!bdi->wb.task)) {
+ trace_writeback_nothread(bdi, work);
wake_up_process(default_backing_dev_info.wb.task);
} else {
struct bdi_writeback *wb = &bdi->wb;
@@ -95,8 +107,10 @@ __bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
*/
work = kzalloc(sizeof(*work), GFP_ATOMIC);
if (!work) {
- if (bdi->wb.task)
+ if (bdi->wb.task) {
+ trace_writeback_nowork(bdi);
wake_up_process(bdi->wb.task);
+ }
return;
}
@@ -751,6 +765,8 @@ long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
if (force_wait)
work->sync_mode = WB_SYNC_ALL;
+ trace_writeback_exec(bdi, work);
+
wrote += wb_writeback(wb, work);
/*
@@ -805,9 +821,13 @@ int bdi_writeback_thread(void *data)
smp_mb__after_clear_bit();
wake_up_bit(&bdi->state, BDI_pending);
+ trace_writeback_thread_start(bdi);
+
while (!kthread_should_stop()) {
pages_written = wb_do_writeback(wb, 0);
+ trace_writeback_pages_written(pages_written);
+
if (pages_written)
last_active = jiffies;
else if (wait_jiffies != -1UL) {
@@ -845,6 +865,8 @@ int bdi_writeback_thread(void *data)
*/
if (!list_empty(&bdi->work_list))
wb_do_writeback(wb, 1);
+
+ trace_writeback_thread_stop(bdi);
return 0;
}
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
new file mode 100644
index 0000000000000..562fcae10d9d6
--- /dev/null
+++ b/include/trace/events/writeback.h
@@ -0,0 +1,91 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM writeback
+
+#if !defined(_TRACE_WRITEBACK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_WRITEBACK_H
+
+#include <linux/backing-dev.h>
+#include <linux/writeback.h>
+
+struct wb_writeback_work;
+
+DECLARE_EVENT_CLASS(writeback_work_class,
+ TP_PROTO(struct backing_dev_info *bdi, struct wb_writeback_work *work),
+ TP_ARGS(bdi, work),
+ TP_STRUCT__entry(
+ __array(char, name, 32)
+ __field(long, nr_pages)
+ __field(dev_t, sb_dev)
+ __field(int, sync_mode)
+ __field(int, for_kupdate)
+ __field(int, range_cyclic)
+ __field(int, for_background)
+ ),
+ TP_fast_assign(
+ strncpy(__entry->name, dev_name(bdi->dev), 32);
+ __entry->nr_pages = work->nr_pages;
+ __entry->sb_dev = work->sb ? work->sb->s_dev : 0;
+ __entry->sync_mode = work->sync_mode;
+ __entry->for_kupdate = work->for_kupdate;
+ __entry->range_cyclic = work->range_cyclic;
+ __entry->for_background = work->for_background;
+ ),
+ TP_printk("bdi %s: sb_dev %d:%d nr_pages=%ld sync_mode=%d "
+ "kupdate=%d range_cyclic=%d background=%d",
+ __entry->name,
+ MAJOR(__entry->sb_dev), MINOR(__entry->sb_dev),
+ __entry->nr_pages,
+ __entry->sync_mode,
+ __entry->for_kupdate,
+ __entry->range_cyclic,
+ __entry->for_background
+ )
+);
+#define DEFINE_WRITEBACK_WORK_EVENT(name) \
+DEFINE_EVENT(writeback_work_class, name, \
+ TP_PROTO(struct backing_dev_info *bdi, struct wb_writeback_work *work), \
+ TP_ARGS(bdi, work))
+DEFINE_WRITEBACK_WORK_EVENT(writeback_nothread);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_queue);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_exec);
+
+TRACE_EVENT(writeback_pages_written,
+ TP_PROTO(long pages_written),
+ TP_ARGS(pages_written),
+ TP_STRUCT__entry(
+ __field(long, pages)
+ ),
+ TP_fast_assign(
+ __entry->pages = pages_written;
+ ),
+ TP_printk("%ld", __entry->pages)
+);
+
+DECLARE_EVENT_CLASS(writeback_class,
+ TP_PROTO(struct backing_dev_info *bdi),
+ TP_ARGS(bdi),
+ TP_STRUCT__entry(
+ __array(char, name, 32)
+ ),
+ TP_fast_assign(
+ strncpy(__entry->name, dev_name(bdi->dev), 32);
+ ),
+ TP_printk("bdi %s",
+ __entry->name
+ )
+);
+#define DEFINE_WRITEBACK_EVENT(name) \
+DEFINE_EVENT(writeback_class, name, \
+ TP_PROTO(struct backing_dev_info *bdi), \
+ TP_ARGS(bdi))
+
+DEFINE_WRITEBACK_EVENT(writeback_nowork);
+DEFINE_WRITEBACK_EVENT(writeback_bdi_register);
+DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
+DEFINE_WRITEBACK_EVENT(writeback_thread_start);
+DEFINE_WRITEBACK_EVENT(writeback_thread_stop);
+
+#endif /* _TRACE_WRITEBACK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index bceac647e4d16..ac78a3336181c 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/writeback.h>
#include <linux/device.h>
+#include <trace/events/writeback.h>
static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
@@ -518,6 +519,7 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
bdi_debug_register(bdi, dev_name(dev));
set_bit(BDI_registered, &bdi->state);
+ trace_writeback_bdi_register(bdi);
exit:
return ret;
}
@@ -578,6 +580,7 @@ static void bdi_prune_sb(struct backing_dev_info *bdi)
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
+ trace_writeback_bdi_unregister(bdi);
bdi_prune_sb(bdi);
if (!bdi_cap_flush_forker(bdi))
--
GitLab
From 028c2dd184c097809986684f2f0627eea5529fea Mon Sep 17 00:00:00 2001
From: Dave Chinner <dchinner@redhat.com>
Date: Wed, 7 Jul 2010 13:24:07 +1000
Subject: [PATCH 312/863] writeback: Add tracing to balance_dirty_pages
Tracing high level background writeback events is good, but it doesn't
give the entire picture. Add visibility into write throttling to catch IO
dispatched by foreground throttling of processing dirtying lots of pages.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 5 +++
include/trace/events/writeback.h | 64 ++++++++++++++++++++++++++++++++
mm/page-writeback.c | 4 ++
3 files changed, 73 insertions(+)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 73acab4dc2b7a..bf10cbf379dd0 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -656,10 +656,14 @@ static long wb_writeback(struct bdi_writeback *wb,
wbc.more_io = 0;
wbc.nr_to_write = MAX_WRITEBACK_PAGES;
wbc.pages_skipped = 0;
+
+ trace_wbc_writeback_start(&wbc, wb->bdi);
if (work->sb)
__writeback_inodes_sb(work->sb, wb, &wbc);
else
writeback_inodes_wb(wb, &wbc);
+ trace_wbc_writeback_written(&wbc, wb->bdi);
+
work->nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
@@ -687,6 +691,7 @@ static long wb_writeback(struct bdi_writeback *wb,
if (!list_empty(&wb->b_more_io)) {
inode = list_entry(wb->b_more_io.prev,
struct inode, i_list);
+ trace_wbc_writeback_wait(&wbc, wb->bdi);
inode_wait_for_writeback(inode);
}
spin_unlock(&inode_lock);
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index 562fcae10d9d6..0be26acae064c 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -85,6 +85,70 @@ DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
DEFINE_WRITEBACK_EVENT(writeback_thread_start);
DEFINE_WRITEBACK_EVENT(writeback_thread_stop);
+DECLARE_EVENT_CLASS(wbc_class,
+ TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi),
+ TP_ARGS(wbc, bdi),
+ TP_STRUCT__entry(
+ __array(char, name, 32)
+ __field(long, nr_to_write)
+ __field(long, pages_skipped)
+ __field(int, sync_mode)
+ __field(int, nonblocking)
+ __field(int, encountered_congestion)
+ __field(int, for_kupdate)
+ __field(int, for_background)
+ __field(int, for_reclaim)
+ __field(int, range_cyclic)
+ __field(int, more_io)
+ __field(unsigned long, older_than_this)
+ __field(long, range_start)
+ __field(long, range_end)
+ ),
+
+ TP_fast_assign(
+ strncpy(__entry->name, dev_name(bdi->dev), 32);
+ __entry->nr_to_write = wbc->nr_to_write;
+ __entry->pages_skipped = wbc->pages_skipped;
+ __entry->sync_mode = wbc->sync_mode;
+ __entry->for_kupdate = wbc->for_kupdate;
+ __entry->for_background = wbc->for_background;
+ __entry->for_reclaim = wbc->for_reclaim;
+ __entry->range_cyclic = wbc->range_cyclic;
+ __entry->more_io = wbc->more_io;
+ __entry->older_than_this = wbc->older_than_this ?
+ *wbc->older_than_this : 0;
+ __entry->range_start = (long)wbc->range_start;
+ __entry->range_end = (long)wbc->range_end;
+ ),
+
+ TP_printk("bdi %s: towrt=%ld skip=%ld mode=%d kupd=%d "
+ "bgrd=%d reclm=%d cyclic=%d more=%d older=0x%lx "
+ "start=0x%lx end=0x%lx",
+ __entry->name,
+ __entry->nr_to_write,
+ __entry->pages_skipped,
+ __entry->sync_mode,
+ __entry->for_kupdate,
+ __entry->for_background,
+ __entry->for_reclaim,
+ __entry->range_cyclic,
+ __entry->more_io,
+ __entry->older_than_this,
+ __entry->range_start,
+ __entry->range_end)
+)
+
+#define DEFINE_WBC_EVENT(name) \
+DEFINE_EVENT(wbc_class, name, \
+ TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi), \
+ TP_ARGS(wbc, bdi))
+DEFINE_WBC_EVENT(wbc_writeback_start);
+DEFINE_WBC_EVENT(wbc_writeback_written);
+DEFINE_WBC_EVENT(wbc_writeback_wait);
+DEFINE_WBC_EVENT(wbc_balance_dirty_start);
+DEFINE_WBC_EVENT(wbc_balance_dirty_written);
+DEFINE_WBC_EVENT(wbc_balance_dirty_wait);
+
#endif /* _TRACE_WRITEBACK_H */
/* This part must be outside protection */
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 37498ef615483..d556cd829af66 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -34,6 +34,7 @@
#include <linux/syscalls.h>
#include <linux/buffer_head.h>
#include <linux/pagevec.h>
+#include <trace/events/writeback.h>
/*
* After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
@@ -535,11 +536,13 @@ static void balance_dirty_pages(struct address_space *mapping,
* threshold otherwise wait until the disk writes catch
* up.
*/
+ trace_wbc_balance_dirty_start(&wbc, bdi);
if (bdi_nr_reclaimable > bdi_thresh) {
writeback_inodes_wb(&bdi->wb, &wbc);
pages_written += write_chunk - wbc.nr_to_write;
get_dirty_limits(&background_thresh, &dirty_thresh,
&bdi_thresh, bdi);
+ trace_wbc_balance_dirty_written(&wbc, bdi);
}
/*
@@ -565,6 +568,7 @@ static void balance_dirty_pages(struct address_space *mapping,
if (pages_written >= write_chunk)
break; /* We've done our duty */
+ trace_wbc_balance_dirty_wait(&wbc, bdi);
__set_current_state(TASK_INTERRUPTIBLE);
io_schedule_timeout(pause);
--
GitLab
From 9e094383b60066996fbc3b53891324e5d2ec858d Mon Sep 17 00:00:00 2001
From: Dave Chinner <dchinner@redhat.com>
Date: Wed, 7 Jul 2010 13:24:08 +1000
Subject: [PATCH 313/863] writeback: Add tracing to write_cache_pages
Add a trace event to the ->writepage loop in write_cache_pages to give
visibility into how the ->writepage call is changing variables within the
writeback control structure. Of most interest is how wbc->nr_to_write changes
from call to call, especially with filesystems that write multiple pages
in ->writepage.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/trace/events/writeback.h | 1 +
mm/page-writeback.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index 0be26acae064c..bde92e07fa4f6 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -148,6 +148,7 @@ DEFINE_WBC_EVENT(wbc_writeback_wait);
DEFINE_WBC_EVENT(wbc_balance_dirty_start);
DEFINE_WBC_EVENT(wbc_balance_dirty_written);
DEFINE_WBC_EVENT(wbc_balance_dirty_wait);
+DEFINE_WBC_EVENT(wbc_writepage);
#endif /* _TRACE_WRITEBACK_H */
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index d556cd829af66..3d2111a222363 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -933,6 +933,7 @@ int write_cache_pages(struct address_space *mapping,
if (!clear_page_dirty_for_io(page))
goto continue_unlock;
+ trace_wbc_writepage(wbc, mapping->backing_dev_info);
ret = (*writepage)(page, wbc, data);
if (unlikely(ret)) {
if (ret == AOP_WRITEPAGE_ACTIVATE) {
--
GitLab
From 610a63498f7f366031a6327eaaa9963ffa110b2b Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 8 Jul 2010 10:16:17 +0200
Subject: [PATCH 314/863] scsi: fix discard page leak
We leak a page allocated for discard on some error conditions
(e.g. scsi_prep_state_check returns BLKPREP_DEFER in
scsi_setup_blk_pc_cmnd).
We unprep on requests that weren't prepped in the error path of
scsi_init_io. It makes the error path to clean up scsi commands messy.
Let's strictly apply the rule that we can't unprep on a request that
wasn't prepped.
Calling just scsi_put_command() in the error path of scsi_init_io() is
enough. We don't set REQ_DONTPREP yet.
scsi_setup_discard_cmnd can safely free a page on the error case with
the above rule.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/scsi_lib.c | 7 ++-----
drivers/scsi/sd.c | 10 ++++++++--
2 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ee836193f5312..b8de389636f83 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1011,11 +1011,8 @@ int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask)
err_exit:
scsi_release_buffers(cmd);
- if (error == BLKPREP_KILL)
- scsi_put_command(cmd);
- else /* BLKPREP_DEFER */
- scsi_unprep_request(cmd->request);
-
+ scsi_put_command(cmd);
+ cmd->request->special = NULL;
return error;
}
EXPORT_SYMBOL(scsi_init_io);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0994ab63b5987..1d0c4b7c3b693 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -468,6 +468,10 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
blk_add_request_payload(rq, page, len);
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
rq->buffer = page_address(page);
+ if (ret != BLKPREP_OK) {
+ __free_page(page);
+ rq->buffer = NULL;
+ }
return ret;
}
@@ -485,8 +489,10 @@ static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
static void sd_unprep_fn(struct request_queue *q, struct request *rq)
{
- if (rq->cmd_flags & REQ_DISCARD)
- __free_page(virt_to_page(rq->buffer));
+ if (rq->cmd_flags & REQ_DISCARD) {
+ free_page((unsigned long)rq->buffer);
+ rq->buffer = NULL;
+ }
}
/**
--
GitLab
From 34484062445fe905bf02c72f87ddda21881acda3 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 7 Jul 2010 16:51:23 +0200
Subject: [PATCH 315/863] scsi/i2o_block: cleanup ioctl handling
This fixes the ioctl function of the i2o_block driver, which
has multiple problems:
* The BLKI2OSRSTRAT and BLKI2OSWSTRAT commands always return
-ENOTTY on success, where they should return 0.
* Support for 32 bit compat is missing
* The driver should use the .ioctl function and because
.locked_ioctl is going away.
The use of the big kernel lock remains for now, but gets
made explictit in the ioctl function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/message/i2o/i2o_block.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 108f0c2b2bfd6..b8233ff863e32 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -53,6 +53,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2o.h>
+#include <linux/smp_lock.h>
#include <linux/mempool.h>
@@ -652,30 +653,40 @@ static int i2o_block_ioctl(struct block_device *bdev, fmode_t mode,
{
struct gendisk *disk = bdev->bd_disk;
struct i2o_block_device *dev = disk->private_data;
+ int ret = -ENOTTY;
/* Anyone capable of this syscall can do *real bad* things */
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ lock_kernel();
switch (cmd) {
case BLKI2OGRSTRAT:
- return put_user(dev->rcache, (int __user *)arg);
+ ret = put_user(dev->rcache, (int __user *)arg);
+ break;
case BLKI2OGWSTRAT:
- return put_user(dev->wcache, (int __user *)arg);
+ ret = put_user(dev->wcache, (int __user *)arg);
+ break;
case BLKI2OSRSTRAT:
+ ret = -EINVAL;
if (arg < 0 || arg > CACHE_SMARTFETCH)
- return -EINVAL;
+ break;
dev->rcache = arg;
+ ret = 0;
break;
case BLKI2OSWSTRAT:
+ ret = -EINVAL;
if (arg != 0
&& (arg < CACHE_WRITETHROUGH || arg > CACHE_SMARTBACK))
- return -EINVAL;
+ break;
dev->wcache = arg;
+ ret = 0;
break;
}
- return -ENOTTY;
+ unlock_kernel();
+
+ return ret;
};
/**
@@ -930,7 +941,8 @@ static const struct block_device_operations i2o_block_fops = {
.owner = THIS_MODULE,
.open = i2o_block_open,
.release = i2o_block_release,
- .locked_ioctl = i2o_block_ioctl,
+ .ioctl = i2o_block_ioctl,
+ .compat_ioctl = i2o_block_ioctl,
.getgeo = i2o_block_getgeo,
.media_changed = i2o_block_media_changed
};
--
GitLab
From 8a6cfeb6deca3a8fefd639d898b0d163c0b5d368 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 8 Jul 2010 10:18:46 +0200
Subject: [PATCH 316/863] block: push down BKL into .locked_ioctl
As a preparation for the removal of the big kernel
lock in the block layer, this removes the BKL
from the common ioctl handling code, moving it
into every single driver still using it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/ioctl.c | 11 +----------
drivers/block/amiflop.c | 17 +++++++++++++++--
drivers/block/ataflop.c | 18 +++++++++++++++---
drivers/block/brd.c | 5 ++++-
drivers/block/cciss.c | 8 +++++---
drivers/block/cpqarray.c | 18 ++++++++++++++++--
drivers/block/floppy.c | 17 +++++++++++++++--
drivers/block/nbd.c | 5 ++++-
drivers/block/paride/pcd.c | 11 +++++++++--
drivers/block/paride/pd.c | 5 ++++-
drivers/block/paride/pf.c | 6 +++++-
drivers/block/pktcdvd.c | 13 +++++++++----
drivers/block/swim.c | 5 ++++-
drivers/block/swim3.c | 17 +++++++++++++++--
drivers/block/ub.c | 10 ++++++++--
drivers/block/virtio_blk.c | 17 +++++++++++++++--
drivers/block/xd.c | 17 +++++++++++++++--
drivers/block/xen-blkfront.c | 2 +-
drivers/cdrom/gdrom.c | 11 +++++++++--
drivers/cdrom/viocd.c | 11 +++++++++--
drivers/ide/ide-cd.c | 18 ++++++++++++++++--
drivers/ide/ide-disk_ioctl.c | 9 +++++++--
drivers/ide/ide-floppy_ioctl.c | 12 +++++++++---
drivers/ide/ide-gd.c | 2 +-
drivers/ide/ide-tape.c | 10 ++++++++--
drivers/message/i2o/i2o_block.c | 22 +++++-----------------
drivers/mtd/mtd_blkdevs.c | 5 ++++-
drivers/scsi/sd.c | 17 ++++++++++++-----
drivers/scsi/sr.c | 18 +++++++++++++-----
include/linux/blkdev.h | 1 -
30 files changed, 253 insertions(+), 85 deletions(-)
diff --git a/block/ioctl.c b/block/ioctl.c
index e8eb679f2f9b1..1cfa8d449d90d 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -163,18 +163,10 @@ int __blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
struct gendisk *disk = bdev->bd_disk;
- int ret;
if (disk->fops->ioctl)
return disk->fops->ioctl(bdev, mode, cmd, arg);
- if (disk->fops->locked_ioctl) {
- lock_kernel();
- ret = disk->fops->locked_ioctl(bdev, mode, cmd, arg);
- unlock_kernel();
- return ret;
- }
-
return -ENOTTY;
}
/*
@@ -185,8 +177,7 @@ int __blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
EXPORT_SYMBOL_GPL(__blkdev_driver_ioctl);
/*
- * always keep this in sync with compat_blkdev_ioctl() and
- * compat_blkdev_locked_ioctl()
+ * always keep this in sync with compat_blkdev_ioctl()
*/
int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
unsigned long arg)
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 832798aa14f63..0fa26359304ce 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -60,6 +60,7 @@
#include <linux/hdreg.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/smp_lock.h>
#include <linux/amifdreg.h>
#include <linux/amifd.h>
#include <linux/buffer_head.h>
@@ -1423,7 +1424,7 @@ static int fd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
-static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long param)
{
struct amiga_floppy_struct *p = bdev->bd_disk->private_data;
@@ -1500,6 +1501,18 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode,
return 0;
}
+static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = fd_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
static void fd_probe(int dev)
{
unsigned long code;
@@ -1638,7 +1651,7 @@ static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
- .locked_ioctl = fd_ioctl,
+ .ioctl = fd_ioctl,
.getgeo = fd_getgeo,
.media_changed = amiga_floppy_change,
};
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index e35cf59cbfde3..1bb8bfcfdbd99 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -67,6 +67,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <asm/atafd.h>
#include <asm/atafdreg.h>
@@ -359,7 +360,7 @@ static void finish_fdc( void );
static void finish_fdc_done( int dummy );
static void setup_req_params( int drive );
static void redo_fd_request( void);
-static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
+static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
cmd, unsigned long param);
static void fd_probe( int drive );
static int fd_test_drive_present( int drive );
@@ -1480,7 +1481,7 @@ void do_fd_request(struct request_queue * q)
atari_enable_irq( IRQ_MFP_FDC );
}
-static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long param)
{
struct gendisk *disk = bdev->bd_disk;
@@ -1665,6 +1666,17 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode,
}
}
+static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ ret = fd_locked_ioctl(bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
/* Initialize the 'unit' variable for drive 'drive' */
@@ -1855,7 +1867,7 @@ static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
- .locked_ioctl = fd_ioctl,
+ .ioctl = fd_ioctl,
.media_changed = check_floppy_change,
.revalidate_disk= floppy_revalidate,
};
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 1d2c18620f9a2..1c7f63792ff8a 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -15,6 +15,7 @@
#include <linux/blkdev.h>
#include <linux/bio.h>
#include <linux/highmem.h>
+#include <linux/smp_lock.h>
#include <linux/radix-tree.h>
#include <linux/buffer_head.h> /* invalidate_bh_lrus() */
#include <linux/slab.h>
@@ -401,6 +402,7 @@ static int brd_ioctl(struct block_device *bdev, fmode_t mode,
* ram device BLKFLSBUF has special semantics, we want to actually
* release and destroy the ramdisk data.
*/
+ lock_kernel();
mutex_lock(&bdev->bd_mutex);
error = -EBUSY;
if (bdev->bd_openers <= 1) {
@@ -417,13 +419,14 @@ static int brd_ioctl(struct block_device *bdev, fmode_t mode,
error = 0;
}
mutex_unlock(&bdev->bd_mutex);
+ unlock_kernel();
return error;
}
static const struct block_device_operations brd_fops = {
.owner = THIS_MODULE,
- .locked_ioctl = brd_ioctl,
+ .ioctl = brd_ioctl,
#ifdef CONFIG_BLK_DEV_XIP
.direct_access = brd_direct_access,
#endif
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 11b377762b8ef..a6c0494dd0544 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -179,6 +179,8 @@ static irqreturn_t do_cciss_intx(int irq, void *dev_id);
static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id);
static int cciss_open(struct block_device *bdev, fmode_t mode);
static int cciss_release(struct gendisk *disk, fmode_t mode);
+static int do_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg);
static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg);
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
@@ -237,7 +239,7 @@ static const struct block_device_operations cciss_fops = {
.owner = THIS_MODULE,
.open = cciss_open,
.release = cciss_release,
- .locked_ioctl = cciss_ioctl,
+ .ioctl = do_ioctl,
.getgeo = cciss_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = cciss_compat_ioctl,
@@ -1057,8 +1059,6 @@ static int cciss_release(struct gendisk *disk, fmode_t mode)
return 0;
}
-#ifdef CONFIG_COMPAT
-
static int do_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
@@ -1069,6 +1069,8 @@ static int do_ioctl(struct block_device *bdev, fmode_t mode,
return ret;
}
+#ifdef CONFIG_COMPAT
+
static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg);
static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index abb4ec6690fcc..c459aeea3c0c1 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -35,6 +35,7 @@
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/hdreg.h>
+#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/genhd.h>
@@ -197,7 +198,7 @@ static const struct block_device_operations ida_fops = {
.owner = THIS_MODULE,
.open = ida_open,
.release = ida_release,
- .locked_ioctl = ida_ioctl,
+ .ioctl = ida_ioctl,
.getgeo = ida_getgeo,
.revalidate_disk= ida_revalidate,
};
@@ -1128,7 +1129,7 @@ static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo)
* ida_ioctl does some miscellaneous stuff like reporting drive geometry,
* setting readahead and submitting commands from userspace to the controller.
*/
-static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
+static int ida_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
{
drv_info_t *drv = get_drv(bdev->bd_disk);
ctlr_info_t *host = get_host(bdev->bd_disk);
@@ -1192,6 +1193,19 @@ static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
}
}
+
+static int ida_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = ida_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
/*
* ida_ctlr_ioctl is for passing commands to the controller from userspace.
* The command block (io) has already been copied to kernel space for us,
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 82c30f9f81ca2..40419b066aa9e 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -178,6 +178,7 @@ static int print_unex = 1;
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/bio.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/jiffies.h>
#include <linux/fcntl.h>
@@ -3371,7 +3372,7 @@ static int fd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
-static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
+static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
unsigned long param)
{
int drive = (long)bdev->bd_disk->private_data;
@@ -3547,6 +3548,18 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
return 0;
}
+static int fd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = fd_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
static void __init config_types(void)
{
bool has_drive = false;
@@ -3848,7 +3861,7 @@ static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
- .locked_ioctl = fd_ioctl,
+ .ioctl = fd_ioctl,
.getgeo = fd_getgeo,
.media_changed = check_floppy_change,
.revalidate_disk = floppy_revalidate,
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 2e74e7d475cab..6751789fb379f 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -24,6 +24,7 @@
#include <linux/errno.h>
#include <linux/file.h>
#include <linux/ioctl.h>
+#include <linux/smp_lock.h>
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/kernel.h>
@@ -716,9 +717,11 @@ static int nbd_ioctl(struct block_device *bdev, fmode_t mode,
dprintk(DBG_IOCTL, "%s: nbd_ioctl cmd=%s(0x%x) arg=%lu\n",
lo->disk->disk_name, ioctl_cmd_to_ascii(cmd), cmd, arg);
+ lock_kernel();
mutex_lock(&lo->tx_lock);
error = __nbd_ioctl(bdev, lo, cmd, arg);
mutex_unlock(&lo->tx_lock);
+ unlock_kernel();
return error;
}
@@ -726,7 +729,7 @@ static int nbd_ioctl(struct block_device *bdev, fmode_t mode,
static const struct block_device_operations nbd_fops =
{
.owner = THIS_MODULE,
- .locked_ioctl = nbd_ioctl,
+ .ioctl = nbd_ioctl,
};
/*
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index 71acf4e53356f..daba7a62a6634 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -138,6 +138,7 @@ enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY};
#include <linux/cdrom.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
static DEFINE_SPINLOCK(pcd_lock);
@@ -238,7 +239,13 @@ static int pcd_block_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
struct pcd_unit *cd = bdev->bd_disk->private_data;
- return cdrom_ioctl(&cd->info, bdev, mode, cmd, arg);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_ioctl(&cd->info, bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
}
static int pcd_block_media_changed(struct gendisk *disk)
@@ -251,7 +258,7 @@ static const struct block_device_operations pcd_bdops = {
.owner = THIS_MODULE,
.open = pcd_block_open,
.release = pcd_block_release,
- .locked_ioctl = pcd_block_ioctl,
+ .ioctl = pcd_block_ioctl,
.media_changed = pcd_block_media_changed,
};
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 4e8b9bff3abea..c4d6ed9846ca9 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -153,6 +153,7 @@ enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/kernel.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <linux/workqueue.h>
@@ -768,8 +769,10 @@ static int pd_ioctl(struct block_device *bdev, fmode_t mode,
switch (cmd) {
case CDROMEJECT:
+ lock_kernel();
if (disk->access == 1)
pd_special_command(disk, pd_eject);
+ unlock_kernel();
return 0;
default:
return -EINVAL;
@@ -812,7 +815,7 @@ static const struct block_device_operations pd_fops = {
.owner = THIS_MODULE,
.open = pd_open,
.release = pd_release,
- .locked_ioctl = pd_ioctl,
+ .ioctl = pd_ioctl,
.getgeo = pd_getgeo,
.media_changed = pd_check_media,
.revalidate_disk= pd_revalidate
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index c059aab3006b9..38b4d566b8160 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -152,6 +152,7 @@ enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_LUN, D_DLY};
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/blkpg.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
static DEFINE_SPINLOCK(pf_spin_lock);
@@ -266,7 +267,7 @@ static const struct block_device_operations pf_fops = {
.owner = THIS_MODULE,
.open = pf_open,
.release = pf_release,
- .locked_ioctl = pf_ioctl,
+ .ioctl = pf_ioctl,
.getgeo = pf_getgeo,
.media_changed = pf_check_media,
};
@@ -342,7 +343,10 @@ static int pf_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, u
if (pf->access != 1)
return -EBUSY;
+ lock_kernel();
pf_eject(pf);
+ unlock_kernel();
+
return 0;
}
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 9f3e4454274b6..40f1e31f42c4c 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -57,6 +57,7 @@
#include <linux/seq_file.h>
#include <linux/miscdevice.h>
#include <linux/freezer.h>
+#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <scsi/scsi_cmnd.h>
@@ -2762,10 +2763,12 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
static int pkt_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
{
struct pktcdvd_device *pd = bdev->bd_disk->private_data;
+ int ret;
VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd,
MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev));
+ lock_kernel();
switch (cmd) {
case CDROMEJECT:
/*
@@ -2783,14 +2786,16 @@ static int pkt_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
case CDROM_LAST_WRITTEN:
case CDROM_SEND_PACKET:
case SCSI_IOCTL_SEND_COMMAND:
- return __blkdev_driver_ioctl(pd->bdev, mode, cmd, arg);
+ ret = __blkdev_driver_ioctl(pd->bdev, mode, cmd, arg);
+ break;
default:
VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd);
- return -ENOTTY;
+ ret = -ENOTTY;
}
+ unlock_kernel();
- return 0;
+ return ret;
}
static int pkt_media_changed(struct gendisk *disk)
@@ -2812,7 +2817,7 @@ static const struct block_device_operations pktcdvd_ops = {
.owner = THIS_MODULE,
.open = pkt_open,
.release = pkt_close,
- .locked_ioctl = pkt_ioctl,
+ .ioctl = pkt_ioctl,
.media_changed = pkt_media_changed,
};
diff --git a/drivers/block/swim.c b/drivers/block/swim.c
index e463657569ff0..f04f74e3758f8 100644
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -20,6 +20,7 @@
#include <linux/fd.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/hdreg.h>
#include <linux/kernel.h>
#include <linux/delay.h>
@@ -690,7 +691,9 @@ static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
case FDEJECT:
if (fs->ref_count != 1)
return -EBUSY;
+ lock_kernel();
err = floppy_eject(fs);
+ unlock_kernel();
return err;
case FDGETPRM:
@@ -753,7 +756,7 @@ static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
- .locked_ioctl = floppy_ioctl,
+ .ioctl = floppy_ioctl,
.getgeo = floppy_getgeo,
.media_changed = floppy_check_change,
.revalidate_disk = floppy_revalidate,
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index ed6fb91123abb..f3657b2a53861 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -25,6 +25,7 @@
#include <linux/ioctl.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/io.h>
@@ -839,7 +840,7 @@ static int fd_eject(struct floppy_state *fs)
static struct floppy_struct floppy_type =
{ 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL }; /* 7 1.44MB 3.5" */
-static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
+static int floppy_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long param)
{
struct floppy_state *fs = bdev->bd_disk->private_data;
@@ -867,6 +868,18 @@ static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
return -ENOTTY;
}
+static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = floppy_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
static int floppy_open(struct block_device *bdev, fmode_t mode)
{
struct floppy_state *fs = bdev->bd_disk->private_data;
@@ -997,7 +1010,7 @@ static int floppy_revalidate(struct gendisk *disk)
static const struct block_device_operations floppy_fops = {
.open = floppy_open,
.release = floppy_release,
- .locked_ioctl = floppy_ioctl,
+ .ioctl = floppy_ioctl,
.media_changed = floppy_check_change,
.revalidate_disk= floppy_revalidate,
};
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index aaf27fb4efd6e..102ed52d0e0f8 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -28,6 +28,7 @@
#include <linux/timer.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <scsi/scsi.h>
#define DRV_NAME "ub"
@@ -1729,8 +1730,13 @@ static int ub_bd_ioctl(struct block_device *bdev, fmode_t mode,
{
struct gendisk *disk = bdev->bd_disk;
void __user *usermem = (void __user *) arg;
+ int ret;
+
+ lock_kernel();
+ ret = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, usermem);
+ unlock_kernel();
- return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, usermem);
+ return ret;
}
/*
@@ -1794,7 +1800,7 @@ static const struct block_device_operations ub_bd_fops = {
.owner = THIS_MODULE,
.open = ub_bd_open,
.release = ub_bd_release,
- .locked_ioctl = ub_bd_ioctl,
+ .ioctl = ub_bd_ioctl,
.media_changed = ub_bd_media_changed,
.revalidate_disk = ub_bd_revalidate,
};
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 0a3222fd44422..7b0f7b624adf0 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -2,6 +2,7 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/hdreg.h>
#include <linux/virtio.h>
#include <linux/virtio_blk.h>
@@ -217,7 +218,7 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
return blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
}
-static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
+static int virtblk_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long data)
{
struct gendisk *disk = bdev->bd_disk;
@@ -243,6 +244,18 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
(void __user *)data);
}
+static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = virtblk_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
/* We provide getgeo only to please some old bootloader/partitioning tools */
static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
{
@@ -269,7 +282,7 @@ static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
}
static const struct block_device_operations virtblk_fops = {
- .locked_ioctl = virtblk_ioctl,
+ .ioctl = virtblk_ioctl,
.owner = THIS_MODULE,
.getgeo = virtblk_getgeo,
};
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index b16a3a926cf26..d5a3cd750561f 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -46,6 +46,7 @@
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/blkpg.h>
#include <linux/delay.h>
#include <linux/io.h>
@@ -133,7 +134,7 @@ static int xd_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static const struct block_device_operations xd_fops = {
.owner = THIS_MODULE,
- .locked_ioctl = xd_ioctl,
+ .ioctl = xd_ioctl,
.getgeo = xd_getgeo,
};
static DECLARE_WAIT_QUEUE_HEAD(xd_wait_int);
@@ -347,7 +348,7 @@ static int xd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
}
/* xd_ioctl: handle device ioctl's */
-static int xd_ioctl(struct block_device *bdev, fmode_t mode, u_int cmd, u_long arg)
+static int xd_locked_ioctl(struct block_device *bdev, fmode_t mode, u_int cmd, u_long arg)
{
switch (cmd) {
case HDIO_SET_DMA:
@@ -375,6 +376,18 @@ static int xd_ioctl(struct block_device *bdev, fmode_t mode, u_int cmd, u_long a
}
}
+static int xd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long param)
+{
+ int ret;
+
+ lock_kernel();
+ ret = xd_locked_ioctl(bdev, mode, cmd, param);
+ unlock_kernel();
+
+ return ret;
+}
+
/* xd_readwrite: handle a read/write request */
static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_int count)
{
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 76af65b654e3f..9119cd3d56a43 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1045,7 +1045,7 @@ static const struct block_device_operations xlvbd_block_fops =
.open = blkif_open,
.release = blkif_release,
.getgeo = blkif_getgeo,
- .locked_ioctl = blkif_ioctl,
+ .ioctl = blkif_ioctl,
};
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 5219b57deb369..1772fd914fb9a 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -34,6 +34,7 @@
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/device.h>
+#include <linux/smp_lock.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
@@ -509,7 +510,13 @@ static int gdrom_bdops_mediachanged(struct gendisk *disk)
static int gdrom_bdops_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
- return cdrom_ioctl(gd.cd_info, bdev, mode, cmd, arg);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_ioctl(gd.cd_info, bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
}
static const struct block_device_operations gdrom_bdops = {
@@ -517,7 +524,7 @@ static const struct block_device_operations gdrom_bdops = {
.open = gdrom_bdops_open,
.release = gdrom_bdops_release,
.media_changed = gdrom_bdops_mediachanged,
- .locked_ioctl = gdrom_bdops_ioctl,
+ .ioctl = gdrom_bdops_ioctl,
};
static irqreturn_t gdrom_command_interrupt(int irq, void *dev_id)
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 1fa6628d150b7..16dada0627ee6 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -42,6 +42,7 @@
#include <linux/module.h>
#include <linux/completion.h>
#include <linux/proc_fs.h>
+#include <linux/smp_lock.h>
#include <linux/seq_file.h>
#include <linux/scatterlist.h>
@@ -167,7 +168,13 @@ static int viocd_blk_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
struct disk_info *di = bdev->bd_disk->private_data;
- return cdrom_ioctl(&di->viocd_info, bdev, mode, cmd, arg);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_ioctl(&di->viocd_info, bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
}
static int viocd_blk_media_changed(struct gendisk *disk)
@@ -180,7 +187,7 @@ static const struct block_device_operations viocd_fops = {
.owner = THIS_MODULE,
.open = viocd_blk_open,
.release = viocd_blk_release,
- .locked_ioctl = viocd_blk_ioctl,
+ .ioctl = viocd_blk_ioctl,
.media_changed = viocd_blk_media_changed,
};
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index ef7e3a9bee518..bf9f61a5c2f86 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -31,6 +31,7 @@
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
@@ -1654,7 +1655,7 @@ static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg)
return 0;
}
-static int idecd_ioctl(struct block_device *bdev, fmode_t mode,
+static int idecd_locked_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info);
@@ -1676,6 +1677,19 @@ static int idecd_ioctl(struct block_device *bdev, fmode_t mode,
return err;
}
+static int idecd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ ret = idecd_locked_ioctl(bdev, mode, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
+
static int idecd_media_changed(struct gendisk *disk)
{
struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
@@ -1696,7 +1710,7 @@ static const struct block_device_operations idecd_ops = {
.owner = THIS_MODULE,
.open = idecd_open,
.release = idecd_release,
- .locked_ioctl = idecd_ioctl,
+ .ioctl = idecd_ioctl,
.media_changed = idecd_media_changed,
.revalidate_disk = idecd_revalidate_disk
};
diff --git a/drivers/ide/ide-disk_ioctl.c b/drivers/ide/ide-disk_ioctl.c
index 7b783dd7c0bec..ec94c66918f6c 100644
--- a/drivers/ide/ide-disk_ioctl.c
+++ b/drivers/ide/ide-disk_ioctl.c
@@ -1,6 +1,7 @@
#include <linux/kernel.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
+#include <linux/smp_lock.h>
#include "ide-disk.h"
@@ -18,9 +19,13 @@ int ide_disk_ioctl(ide_drive_t *drive, struct block_device *bdev, fmode_t mode,
{
int err;
+ lock_kernel();
err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
if (err != -EOPNOTSUPP)
- return err;
+ goto out;
- return generic_ide_ioctl(drive, bdev, cmd, arg);
+ err = generic_ide_ioctl(drive, bdev, cmd, arg);
+out:
+ unlock_kernel();
+ return err;
}
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 9c2288234dea4..fd3d05ab34175 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -5,6 +5,7 @@
#include <linux/kernel.h>
#include <linux/ide.h>
#include <linux/cdrom.h>
+#include <linux/smp_lock.h>
#include <asm/unaligned.h>
@@ -275,12 +276,15 @@ int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev,
void __user *argp = (void __user *)arg;
int err;
- if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
- return ide_floppy_lockdoor(drive, &pc, arg, cmd);
+ lock_kernel();
+ if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) {
+ err = ide_floppy_lockdoor(drive, &pc, arg, cmd);
+ goto out;
+ }
err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp);
if (err != -ENOTTY)
- return err;
+ goto out;
/*
* skip SCSI_IOCTL_SEND_COMMAND (deprecated)
@@ -293,5 +297,7 @@ int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev,
if (err == -ENOTTY)
err = generic_ide_ioctl(drive, bdev, cmd, arg);
+out:
+ unlock_kernel();
return err;
}
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index c102d23d9b382..883f0c979c9ff 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -323,7 +323,7 @@ static const struct block_device_operations ide_gd_ops = {
.owner = THIS_MODULE,
.open = ide_gd_open,
.release = ide_gd_release,
- .locked_ioctl = ide_gd_ioctl,
+ .ioctl = ide_gd_ioctl,
.getgeo = ide_gd_getgeo,
.media_changed = ide_gd_media_changed,
.unlock_native_capacity = ide_gd_unlock_native_capacity,
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 635fd72d4728a..39b0a5c45f07a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -32,6 +32,7 @@
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/ide.h>
@@ -1927,9 +1928,14 @@ static int idetape_ioctl(struct block_device *bdev, fmode_t mode,
{
struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
ide_drive_t *drive = tape->drive;
- int err = generic_ide_ioctl(drive, bdev, cmd, arg);
+ int err;
+
+ lock_kernel();
+ err = generic_ide_ioctl(drive, bdev, cmd, arg);
if (err == -EINVAL)
err = idetape_blkdev_ioctl(drive, cmd, arg);
+ unlock_kernel();
+
return err;
}
@@ -1937,7 +1943,7 @@ static const struct block_device_operations idetape_block_ops = {
.owner = THIS_MODULE,
.open = idetape_open,
.release = idetape_release,
- .locked_ioctl = idetape_ioctl,
+ .ioctl = idetape_ioctl,
};
static int ide_tape_probe(ide_drive_t *drive)
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index b8233ff863e32..d1bdf8abe5db9 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -53,7 +53,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2o.h>
-#include <linux/smp_lock.h>
#include <linux/mempool.h>
@@ -653,40 +652,30 @@ static int i2o_block_ioctl(struct block_device *bdev, fmode_t mode,
{
struct gendisk *disk = bdev->bd_disk;
struct i2o_block_device *dev = disk->private_data;
- int ret = -ENOTTY;
/* Anyone capable of this syscall can do *real bad* things */
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- lock_kernel();
switch (cmd) {
case BLKI2OGRSTRAT:
- ret = put_user(dev->rcache, (int __user *)arg);
- break;
+ return put_user(dev->rcache, (int __user *)arg);
case BLKI2OGWSTRAT:
- ret = put_user(dev->wcache, (int __user *)arg);
- break;
+ return put_user(dev->wcache, (int __user *)arg);
case BLKI2OSRSTRAT:
- ret = -EINVAL;
if (arg < 0 || arg > CACHE_SMARTFETCH)
- break;
+ return -EINVAL;
dev->rcache = arg;
- ret = 0;
break;
case BLKI2OSWSTRAT:
- ret = -EINVAL;
if (arg != 0
&& (arg < CACHE_WRITETHROUGH || arg > CACHE_SMARTBACK))
- break;
+ return -EINVAL;
dev->wcache = arg;
- ret = 0;
break;
}
- unlock_kernel();
-
- return ret;
+ return -ENOTTY;
};
/**
@@ -942,7 +931,6 @@ static const struct block_device_operations i2o_block_fops = {
.open = i2o_block_open,
.release = i2o_block_release,
.ioctl = i2o_block_ioctl,
- .compat_ioctl = i2o_block_ioctl,
.getgeo = i2o_block_getgeo,
.media_changed = i2o_block_media_changed
};
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 475af42745cbf..8c83b11a77d59 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -15,6 +15,7 @@
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
#include <linux/hdreg.h>
#include <linux/init.h>
#include <linux/mutex.h>
@@ -237,6 +238,7 @@ static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
if (!dev)
return ret;
+ lock_kernel();
mutex_lock(&dev->lock);
if (!dev->mtd)
@@ -250,6 +252,7 @@ static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
}
unlock:
mutex_unlock(&dev->lock);
+ unlock_kernel();
blktrans_dev_put(dev);
return ret;
}
@@ -258,7 +261,7 @@ static const struct block_device_operations mtd_blktrans_ops = {
.owner = THIS_MODULE,
.open = blktrans_open,
.release = blktrans_release,
- .locked_ioctl = blktrans_ioctl,
+ .ioctl = blktrans_ioctl,
.getgeo = blktrans_getgeo,
};
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1d0c4b7c3b693..633ac32b25c1b 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -46,6 +46,7 @@
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/delay.h>
+#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/string_helpers.h>
#include <linux/async.h>
@@ -924,6 +925,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
SCSI_LOG_IOCTL(1, printk("sd_ioctl: disk=%s, cmd=0x%x\n",
disk->disk_name, cmd));
+ lock_kernel();
/*
* If we are in the middle of error recovery, don't let anyone
* else try and use this device. Also, if error recovery fails, it
@@ -933,7 +935,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
error = scsi_nonblockable_ioctl(sdp, cmd, p,
(mode & FMODE_NDELAY) != 0);
if (!scsi_block_when_processing_errors(sdp) || !error)
- return error;
+ goto out;
/*
* Send SCSI addressing ioctls directly to mid level, send other
@@ -943,13 +945,18 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
switch (cmd) {
case SCSI_IOCTL_GET_IDLUN:
case SCSI_IOCTL_GET_BUS_NUMBER:
- return scsi_ioctl(sdp, cmd, p);
+ error = scsi_ioctl(sdp, cmd, p);
+ break;
default:
error = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, p);
if (error != -ENOTTY)
- return error;
+ break;
+ error = scsi_ioctl(sdp, cmd, p);
+ break;
}
- return scsi_ioctl(sdp, cmd, p);
+out:
+ unlock_kernel();
+ return error;
}
static void set_media_not_present(struct scsi_disk *sdkp)
@@ -1123,7 +1130,7 @@ static const struct block_device_operations sd_fops = {
.owner = THIS_MODULE,
.open = sd_open,
.release = sd_release,
- .locked_ioctl = sd_ioctl,
+ .ioctl = sd_ioctl,
.getgeo = sd_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = sd_compat_ioctl,
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 0a90abc7f1402..d42fa6468f41e 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -44,6 +44,7 @@
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
@@ -493,6 +494,8 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
void __user *argp = (void __user *)arg;
int ret;
+ lock_kernel();
+
/*
* Send SCSI addressing ioctls directly to mid level, send other
* ioctls to cdrom/block level.
@@ -500,12 +503,13 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
switch (cmd) {
case SCSI_IOCTL_GET_IDLUN:
case SCSI_IOCTL_GET_BUS_NUMBER:
- return scsi_ioctl(sdev, cmd, argp);
+ ret = scsi_ioctl(sdev, cmd, argp);
+ goto out;
}
ret = cdrom_ioctl(&cd->cdi, bdev, mode, cmd, arg);
if (ret != -ENOSYS)
- return ret;
+ goto out;
/*
* ENODEV means that we didn't recognise the ioctl, or that we
@@ -516,8 +520,12 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
(mode & FMODE_NDELAY) != 0);
if (ret != -ENODEV)
- return ret;
- return scsi_ioctl(sdev, cmd, argp);
+ goto out;
+ ret = scsi_ioctl(sdev, cmd, argp);
+
+out:
+ unlock_kernel();
+ return ret;
}
static int sr_block_media_changed(struct gendisk *disk)
@@ -531,7 +539,7 @@ static const struct block_device_operations sr_bdops =
.owner = THIS_MODULE,
.open = sr_block_open,
.release = sr_block_release,
- .locked_ioctl = sr_block_ioctl,
+ .ioctl = sr_block_ioctl,
.media_changed = sr_block_media_changed,
/*
* No compat_ioctl for now because sr_block_ioctl never
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index baf5258f59859..a8b05fc80c6db 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1246,7 +1246,6 @@ static inline int blk_integrity_rq(struct request *rq)
struct block_device_operations {
int (*open) (struct block_device *, fmode_t);
int (*release) (struct gendisk *, fmode_t);
- int (*locked_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*direct_access) (struct block_device *, sector_t,
--
GitLab
From 6e9624b8caec290d28b4c6d9ec75749df6372b87 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 7 Aug 2010 18:25:34 +0200
Subject: [PATCH 317/863] block: push down BKL into .open and .release
The open and release block_device_operations are currently
called with the BKL held. In order to change that, we must
first make sure that all drivers that currently rely
on this have no regressions.
This blindly pushes the BKL into all .open and .release
operations for all block drivers to prepare for the
next step. The drivers can subsequently replace the BKL
with their own locks or remove it completely when it can
be shown that it is not needed.
The functions blkdev_get and blkdev_put are the only
remaining users of the big kernel lock in the block
layer, besides a few uses in the ioctl code, none
of which need to serialize with blkdev_{get,put}.
Most of these two functions is also under the protection
of bdev->bd_mutex, including the actual calls to
->open and ->release, and the common code does not
access any global data structures that need the BKL.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
arch/um/drivers/ubd_kern.c | 7 ++++++-
drivers/block/DAC960.c | 13 +++++++++----
drivers/block/amiflop.c | 12 ++++++++++--
drivers/block/aoe/aoeblk.c | 4 ++++
drivers/block/ataflop.c | 14 +++++++++++++-
drivers/block/cciss.c | 23 ++++++++++++++++++++---
drivers/block/cpqarray.c | 22 +++++++++++++++++++---
drivers/block/drbd/drbd_main.c | 4 ++++
drivers/block/floppy.c | 5 +++++
drivers/block/loop.c | 5 +++++
drivers/block/paride/pcd.c | 10 +++++++++-
drivers/block/paride/pd.c | 4 ++++
drivers/block/paride/pf.c | 20 +++++++++++++++-----
drivers/block/pktcdvd.c | 5 +++++
drivers/block/swim.c | 15 ++++++++++++++-
drivers/block/swim3.c | 15 ++++++++++++++-
drivers/block/ub.c | 17 ++++++++++++++++-
drivers/block/viodasd.c | 19 ++++++++++++++++++-
drivers/block/xen-blkfront.c | 7 +++++++
drivers/block/xsysace.c | 6 ++++++
drivers/block/z2ram.c | 13 ++++++++++---
drivers/cdrom/gdrom.c | 8 +++++++-
drivers/cdrom/viocd.c | 10 +++++++++-
drivers/ide/ide-cd.c | 14 +++++++++-----
drivers/ide/ide-gd.c | 17 ++++++++++++++++-
drivers/ide/ide-tape.c | 9 ++++++++-
drivers/md/dm.c | 7 +++++++
drivers/md/md.c | 6 ++++++
drivers/memstick/core/mspro_block.c | 9 ++++++++-
drivers/message/i2o/i2o_block.c | 5 +++++
drivers/mmc/card/block.c | 5 +++++
drivers/mtd/mtd_blkdevs.c | 6 +++++-
drivers/s390/block/dasd.c | 6 ++++++
drivers/s390/block/dcssblk.c | 5 +++++
drivers/s390/char/tape_block.c | 8 +++++++-
drivers/scsi/sd.c | 5 +++++
drivers/scsi/sr.c | 7 ++++++-
drivers/staging/hv/blkvsc_drv.c | 5 +++++
fs/block_dev.c | 10 ++--------
39 files changed, 334 insertions(+), 48 deletions(-)
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index da992a3ad6b78..1bcd208c459f6 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -33,6 +33,7 @@
#include "linux/mm.h"
#include "linux/slab.h"
#include "linux/vmalloc.h"
+#include "linux/smp_lock.h"
#include "linux/blkpg.h"
#include "linux/genhd.h"
#include "linux/spinlock.h"
@@ -1098,6 +1099,7 @@ static int ubd_open(struct block_device *bdev, fmode_t mode)
struct ubd *ubd_dev = disk->private_data;
int err = 0;
+ lock_kernel();
if(ubd_dev->count == 0){
err = ubd_open_dev(ubd_dev);
if(err){
@@ -1115,7 +1117,8 @@ static int ubd_open(struct block_device *bdev, fmode_t mode)
if(--ubd_dev->count == 0) ubd_close_dev(ubd_dev);
err = -EROFS;
}*/
- out:
+out:
+ unlock_kernel();
return err;
}
@@ -1123,8 +1126,10 @@ static int ubd_release(struct gendisk *disk, fmode_t mode)
{
struct ubd *ubd_dev = disk->private_data;
+ lock_kernel();
if(--ubd_dev->count == 0)
ubd_close_dev(ubd_dev);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index c5f22bb0a48ef..4e2c367fec11d 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -79,23 +79,28 @@ static int DAC960_open(struct block_device *bdev, fmode_t mode)
struct gendisk *disk = bdev->bd_disk;
DAC960_Controller_T *p = disk->queue->queuedata;
int drive_nr = (long)disk->private_data;
+ int ret = -ENXIO;
+ lock_kernel();
if (p->FirmwareType == DAC960_V1_Controller) {
if (p->V1.LogicalDriveInformation[drive_nr].
LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
- return -ENXIO;
+ goto out;
} else {
DAC960_V2_LogicalDeviceInfo_T *i =
p->V2.LogicalDeviceInformation[drive_nr];
if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
- return -ENXIO;
+ goto out;
}
check_disk_change(bdev);
if (!get_capacity(p->disks[drive_nr]))
- return -ENXIO;
- return 0;
+ goto out;
+ ret = 0;
+out:
+ unlock_kernel();
+ return ret;
}
static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 0fa26359304ce..76f114f0bba32 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1555,10 +1555,13 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
int old_dev;
unsigned long flags;
+ lock_kernel();
old_dev = fd_device[drive];
- if (fd_ref[drive] && old_dev != system)
+ if (fd_ref[drive] && old_dev != system) {
+ unlock_kernel();
return -EBUSY;
+ }
if (mode & (FMODE_READ|FMODE_WRITE)) {
check_disk_change(bdev);
@@ -1571,8 +1574,10 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
fd_deselect (drive);
rel_fdc();
- if (wrprot)
+ if (wrprot) {
+ unlock_kernel();
return -EROFS;
+ }
}
}
@@ -1589,6 +1594,7 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
printk(KERN_INFO "fd%d: accessing %s-disk with %s-layout\n",drive,
unit[drive].type->name, data_types[system].name);
+ unlock_kernel();
return 0;
}
@@ -1597,6 +1603,7 @@ static int floppy_release(struct gendisk *disk, fmode_t mode)
struct amiga_floppy_struct *p = disk->private_data;
int drive = p - unit;
+ lock_kernel();
if (unit[drive].dirty == 1) {
del_timer (flush_track_timer + drive);
non_int_flush_track (drive);
@@ -1610,6 +1617,7 @@ static int floppy_release(struct gendisk *disk, fmode_t mode)
/* the mod_use counter is handled this way */
floppy_off (drive | 0x40000000);
#endif
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 65deffde60aca..a946929735a58 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/genhd.h>
#include <linux/netdevice.h>
+#include <linux/smp_lock.h>
#include "aoe.h"
static struct kmem_cache *buf_pool_cache;
@@ -124,13 +125,16 @@ aoeblk_open(struct block_device *bdev, fmode_t mode)
struct aoedev *d = bdev->bd_disk->private_data;
ulong flags;
+ lock_kernel();
spin_lock_irqsave(&d->lock, flags);
if (d->flags & DEVFL_UP) {
d->nopen++;
spin_unlock_irqrestore(&d->lock, flags);
+ unlock_kernel();
return 0;
}
spin_unlock_irqrestore(&d->lock, flags);
+ unlock_kernel();
return -ENODEV;
}
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 1bb8bfcfdbd99..aceb964765246 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1850,22 +1850,34 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
return 0;
}
+static int floppy_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = floppy_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
static int floppy_release(struct gendisk *disk, fmode_t mode)
{
struct atari_floppy_struct *p = disk->private_data;
+ lock_kernel();
if (p->ref < 0)
p->ref = 0;
else if (!p->ref--) {
printk(KERN_ERR "floppy_release with fd_ref == 0");
p->ref = 0;
}
+ unlock_kernel();
return 0;
}
static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
- .open = floppy_open,
+ .open = floppy_unlocked_open,
.release = floppy_release,
.ioctl = fd_ioctl,
.media_changed = check_floppy_change,
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index a6c0494dd0544..665a470310a96 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -178,6 +178,7 @@ static void do_cciss_request(struct request_queue *q);
static irqreturn_t do_cciss_intx(int irq, void *dev_id);
static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id);
static int cciss_open(struct block_device *bdev, fmode_t mode);
+static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode);
static int cciss_release(struct gendisk *disk, fmode_t mode);
static int do_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg);
@@ -237,7 +238,7 @@ static int cciss_compat_ioctl(struct block_device *, fmode_t,
static const struct block_device_operations cciss_fops = {
.owner = THIS_MODULE,
- .open = cciss_open,
+ .open = cciss_unlocked_open,
.release = cciss_release,
.ioctl = do_ioctl,
.getgeo = cciss_getgeo,
@@ -1042,13 +1043,28 @@ static int cciss_open(struct block_device *bdev, fmode_t mode)
return 0;
}
+static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = cciss_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
/*
* Close. Sync first.
*/
static int cciss_release(struct gendisk *disk, fmode_t mode)
{
- ctlr_info_t *host = get_host(disk);
- drive_info_struct *drv = get_drv(disk);
+ ctlr_info_t *host;
+ drive_info_struct *drv;
+
+ lock_kernel();
+ host = get_host(disk);
+ drv = get_drv(disk);
#ifdef CCISS_DEBUG
printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name);
@@ -1056,6 +1072,7 @@ static int cciss_release(struct gendisk *disk, fmode_t mode)
drv->usage_count--;
host->usage_count--;
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index c459aeea3c0c1..28937b6615642 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -158,7 +158,7 @@ static int sendcmd(
unsigned int blkcnt,
unsigned int log_unit );
-static int ida_open(struct block_device *bdev, fmode_t mode);
+static int ida_unlocked_open(struct block_device *bdev, fmode_t mode);
static int ida_release(struct gendisk *disk, fmode_t mode);
static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg);
static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo);
@@ -196,7 +196,7 @@ static inline ctlr_info_t *get_host(struct gendisk *disk)
static const struct block_device_operations ida_fops = {
.owner = THIS_MODULE,
- .open = ida_open,
+ .open = ida_unlocked_open,
.release = ida_release,
.ioctl = ida_ioctl,
.getgeo = ida_getgeo,
@@ -841,13 +841,29 @@ static int ida_open(struct block_device *bdev, fmode_t mode)
return 0;
}
+static int ida_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = ida_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
/*
* Close. Sync first.
*/
static int ida_release(struct gendisk *disk, fmode_t mode)
{
- ctlr_info_t *host = get_host(disk);
+ ctlr_info_t *host;
+
+ lock_kernel();
+ host = get_host(disk);
host->usage_count--;
+ unlock_kernel();
+
return 0;
}
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index e2ab13d99d695..d2b6764a7b1f2 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2604,6 +2604,7 @@ static int drbd_open(struct block_device *bdev, fmode_t mode)
unsigned long flags;
int rv = 0;
+ lock_kernel();
spin_lock_irqsave(&mdev->req_lock, flags);
/* to have a stable mdev->state.role
* and no race with updating open_cnt */
@@ -2618,6 +2619,7 @@ static int drbd_open(struct block_device *bdev, fmode_t mode)
if (!rv)
mdev->open_cnt++;
spin_unlock_irqrestore(&mdev->req_lock, flags);
+ unlock_kernel();
return rv;
}
@@ -2625,7 +2627,9 @@ static int drbd_open(struct block_device *bdev, fmode_t mode)
static int drbd_release(struct gendisk *gd, fmode_t mode)
{
struct drbd_conf *mdev = gd->private_data;
+ lock_kernel();
mdev->open_cnt--;
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 40419b066aa9e..3126d5122b2b1 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3616,6 +3616,7 @@ static int floppy_release(struct gendisk *disk, fmode_t mode)
{
int drive = (long)disk->private_data;
+ lock_kernel();
mutex_lock(&open_lock);
if (UDRS->fd_ref < 0)
UDRS->fd_ref = 0;
@@ -3626,6 +3627,7 @@ static int floppy_release(struct gendisk *disk, fmode_t mode)
if (!UDRS->fd_ref)
opened_bdev[drive] = NULL;
mutex_unlock(&open_lock);
+ unlock_kernel();
return 0;
}
@@ -3643,6 +3645,7 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
int res = -EBUSY;
char *tmp;
+ lock_kernel();
mutex_lock(&open_lock);
old_dev = UDRS->fd_device;
if (opened_bdev[drive] && opened_bdev[drive] != bdev)
@@ -3719,6 +3722,7 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
goto out;
}
mutex_unlock(&open_lock);
+ unlock_kernel();
return 0;
out:
if (UDRS->fd_ref < 0)
@@ -3729,6 +3733,7 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
opened_bdev[drive] = NULL;
out2:
mutex_unlock(&open_lock);
+ unlock_kernel();
return res;
}
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index d285a5481965d..f3c636d237187 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -67,6 +67,7 @@
#include <linux/compat.h>
#include <linux/suspend.h>
#include <linux/freezer.h>
+#include <linux/smp_lock.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h> /* for invalidate_bdev() */
#include <linux/completion.h>
@@ -1408,9 +1409,11 @@ static int lo_open(struct block_device *bdev, fmode_t mode)
{
struct loop_device *lo = bdev->bd_disk->private_data;
+ lock_kernel();
mutex_lock(&lo->lo_ctl_mutex);
lo->lo_refcnt++;
mutex_unlock(&lo->lo_ctl_mutex);
+ unlock_kernel();
return 0;
}
@@ -1420,6 +1423,7 @@ static int lo_release(struct gendisk *disk, fmode_t mode)
struct loop_device *lo = disk->private_data;
int err;
+ lock_kernel();
mutex_lock(&lo->lo_ctl_mutex);
if (--lo->lo_refcnt)
@@ -1444,6 +1448,7 @@ static int lo_release(struct gendisk *disk, fmode_t mode)
out:
mutex_unlock(&lo->lo_ctl_mutex);
out_unlocked:
+ lock_kernel();
return 0;
}
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index daba7a62a6634..76f8565e1e8d0 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -225,13 +225,21 @@ static char *pcd_buf; /* buffer for request in progress */
static int pcd_block_open(struct block_device *bdev, fmode_t mode)
{
struct pcd_unit *cd = bdev->bd_disk->private_data;
- return cdrom_open(&cd->info, bdev, mode);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_open(&cd->info, bdev, mode);
+ unlock_kernel();
+
+ return ret;
}
static int pcd_block_release(struct gendisk *disk, fmode_t mode)
{
struct pcd_unit *cd = disk->private_data;
+ lock_kernel();
cdrom_release(&cd->info, mode);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index c4d6ed9846ca9..985f0d4f1d1e2 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -736,12 +736,14 @@ static int pd_open(struct block_device *bdev, fmode_t mode)
{
struct pd_unit *disk = bdev->bd_disk->private_data;
+ lock_kernel();
disk->access++;
if (disk->removable) {
pd_special_command(disk, pd_media_check);
pd_special_command(disk, pd_door_lock);
}
+ unlock_kernel();
return 0;
}
@@ -783,8 +785,10 @@ static int pd_release(struct gendisk *p, fmode_t mode)
{
struct pd_unit *disk = p->private_data;
+ lock_kernel();
if (!--disk->access && disk->removable)
pd_special_command(disk, pd_door_unlock);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index 38b4d566b8160..4457b494882a4 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -300,20 +300,26 @@ static void __init pf_init_units(void)
static int pf_open(struct block_device *bdev, fmode_t mode)
{
struct pf_unit *pf = bdev->bd_disk->private_data;
+ int ret;
+ lock_kernel();
pf_identify(pf);
+ ret = -ENODEV;
if (pf->media_status == PF_NM)
- return -ENODEV;
+ goto out;
+ ret = -EROFS;
if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE))
- return -EROFS;
+ goto out;
+ ret = 0;
pf->access++;
if (pf->removable)
pf_lock(pf, 1);
-
- return 0;
+out:
+ unlock_kernel();
+ return ret;
}
static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo)
@@ -354,14 +360,18 @@ static int pf_release(struct gendisk *disk, fmode_t mode)
{
struct pf_unit *pf = disk->private_data;
- if (pf->access <= 0)
+ lock_kernel();
+ if (pf->access <= 0) {
+ unlock_kernel();
return -EINVAL;
+ }
pf->access--;
if (!pf->access && pf->removable)
pf_lock(pf, 0);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 40f1e31f42c4c..b1cbeb59bb762 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2383,6 +2383,7 @@ static int pkt_open(struct block_device *bdev, fmode_t mode)
VPRINTK(DRIVER_NAME": entering open\n");
+ lock_kernel();
mutex_lock(&ctl_mutex);
pd = pkt_find_dev_from_minor(MINOR(bdev->bd_dev));
if (!pd) {
@@ -2410,6 +2411,7 @@ static int pkt_open(struct block_device *bdev, fmode_t mode)
}
mutex_unlock(&ctl_mutex);
+ unlock_kernel();
return 0;
out_dec:
@@ -2417,6 +2419,7 @@ static int pkt_open(struct block_device *bdev, fmode_t mode)
out:
VPRINTK(DRIVER_NAME": failed open (%d)\n", ret);
mutex_unlock(&ctl_mutex);
+ unlock_kernel();
return ret;
}
@@ -2425,6 +2428,7 @@ static int pkt_close(struct gendisk *disk, fmode_t mode)
struct pktcdvd_device *pd = disk->private_data;
int ret = 0;
+ lock_kernel();
mutex_lock(&ctl_mutex);
pd->refcnt--;
BUG_ON(pd->refcnt < 0);
@@ -2433,6 +2437,7 @@ static int pkt_close(struct gendisk *disk, fmode_t mode)
pkt_release_dev(pd, flush);
}
mutex_unlock(&ctl_mutex);
+ unlock_kernel();
return ret;
}
diff --git a/drivers/block/swim.c b/drivers/block/swim.c
index f04f74e3758f8..2e46815876dfa 100644
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -662,11 +662,23 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
return err;
}
+static int floppy_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = floppy_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
static int floppy_release(struct gendisk *disk, fmode_t mode)
{
struct floppy_state *fs = disk->private_data;
struct swim __iomem *base = fs->swd->base;
+ lock_kernel();
if (fs->ref_count < 0)
fs->ref_count = 0;
else if (fs->ref_count > 0)
@@ -674,6 +686,7 @@ static int floppy_release(struct gendisk *disk, fmode_t mode)
if (fs->ref_count == 0)
swim_motor(base, OFF);
+ unlock_kernel();
return 0;
}
@@ -754,7 +767,7 @@ static int floppy_revalidate(struct gendisk *disk)
static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
- .open = floppy_open,
+ .open = floppy_unlocked_open,
.release = floppy_release,
.ioctl = floppy_ioctl,
.getgeo = floppy_getgeo,
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index f3657b2a53861..cc6a3864822cf 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -949,15 +949,28 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
return 0;
}
+static int floppy_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = floppy_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
static int floppy_release(struct gendisk *disk, fmode_t mode)
{
struct floppy_state *fs = disk->private_data;
struct swim3 __iomem *sw = fs->swim3;
+ lock_kernel();
if (fs->ref_count > 0 && --fs->ref_count == 0) {
swim3_action(fs, MOTOR_OFF);
out_8(&sw->control_bic, 0xff);
swim3_select(fs, RELAX);
}
+ unlock_kernel();
return 0;
}
@@ -1008,7 +1021,7 @@ static int floppy_revalidate(struct gendisk *disk)
}
static const struct block_device_operations floppy_fops = {
- .open = floppy_open,
+ .open = floppy_unlocked_open,
.release = floppy_release,
.ioctl = floppy_ioctl,
.media_changed = floppy_check_change,
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 102ed52d0e0f8..c48e148785827 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1711,6 +1711,18 @@ static int ub_bd_open(struct block_device *bdev, fmode_t mode)
return rc;
}
+static int ub_bd_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = ub_bd_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
+
/*
*/
static int ub_bd_release(struct gendisk *disk, fmode_t mode)
@@ -1718,7 +1730,10 @@ static int ub_bd_release(struct gendisk *disk, fmode_t mode)
struct ub_lun *lun = disk->private_data;
struct ub_dev *sc = lun->udev;
+ lock_kernel();
ub_put(sc);
+ unlock_kernel();
+
return 0;
}
@@ -1798,7 +1813,7 @@ static int ub_bd_media_changed(struct gendisk *disk)
static const struct block_device_operations ub_bd_fops = {
.owner = THIS_MODULE,
- .open = ub_bd_open,
+ .open = ub_bd_unlocked_open,
.release = ub_bd_release,
.ioctl = ub_bd_ioctl,
.media_changed = ub_bd_media_changed,
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index 5663d3c284c81..f651e51a3319e 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -41,6 +41,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/string.h>
+#include <linux/smp_lock.h>
#include <linux/dma-mapping.h>
#include <linux/completion.h>
#include <linux/device.h>
@@ -175,6 +176,18 @@ static int viodasd_open(struct block_device *bdev, fmode_t mode)
return 0;
}
+static int viodasd_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = viodasd_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
+
/*
* External release entry point.
*/
@@ -183,6 +196,7 @@ static int viodasd_release(struct gendisk *disk, fmode_t mode)
struct viodasd_device *d = disk->private_data;
HvLpEvent_Rc hvrc;
+ lock_kernel();
/* Send the event to OS/400. We DON'T expect a response */
hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
HvLpEvent_Type_VirtualIo,
@@ -195,6 +209,9 @@ static int viodasd_release(struct gendisk *disk, fmode_t mode)
0, 0, 0);
if (hvrc != 0)
pr_warning("HV close call failed %d\n", (int)hvrc);
+
+ unlock_kernel();
+
return 0;
}
@@ -219,7 +236,7 @@ static int viodasd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
*/
static const struct block_device_operations viodasd_fops = {
.owner = THIS_MODULE,
- .open = viodasd_open,
+ .open = viodasd_unlocked_open,
.release = viodasd_release,
.getgeo = viodasd_getgeo,
};
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 9119cd3d56a43..91374282755db 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -41,6 +41,7 @@
#include <linux/cdrom.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/scatterlist.h>
#include <xen/xen.h>
@@ -1018,13 +1019,18 @@ static int blkfront_is_ready(struct xenbus_device *dev)
static int blkif_open(struct block_device *bdev, fmode_t mode)
{
struct blkfront_info *info = bdev->bd_disk->private_data;
+
+ lock_kernel();
info->users++;
+ unlock_kernel();
+
return 0;
}
static int blkif_release(struct gendisk *disk, fmode_t mode)
{
struct blkfront_info *info = disk->private_data;
+ lock_kernel();
info->users--;
if (info->users == 0) {
/* Check whether we have been instructed to close. We will
@@ -1036,6 +1042,7 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
if (state == XenbusStateClosing && info->is_ready)
blkfront_closing(dev);
}
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ac278ac908d50..b71888b909a0e 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -89,6 +89,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/ata.h>
#include <linux/hdreg.h>
#include <linux/platform_device.h>
@@ -901,11 +902,14 @@ static int ace_open(struct block_device *bdev, fmode_t mode)
dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1);
+ lock_kernel();
spin_lock_irqsave(&ace->lock, flags);
ace->users++;
spin_unlock_irqrestore(&ace->lock, flags);
check_disk_change(bdev);
+ unlock_kernel();
+
return 0;
}
@@ -917,6 +921,7 @@ static int ace_release(struct gendisk *disk, fmode_t mode)
dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1);
+ lock_kernel();
spin_lock_irqsave(&ace->lock, flags);
ace->users--;
if (ace->users == 0) {
@@ -924,6 +929,7 @@ static int ace_release(struct gendisk *disk, fmode_t mode)
ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ);
}
spin_unlock_irqrestore(&ace->lock, flags);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index 9114654b54d9a..d75b2bb601adb 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -33,6 +33,7 @@
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/bitops.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <asm/setup.h>
@@ -153,6 +154,7 @@ static int z2_open(struct block_device *bdev, fmode_t mode)
device = MINOR(bdev->bd_dev);
+ lock_kernel();
if ( current_device != -1 && current_device != device )
{
rc = -EBUSY;
@@ -294,20 +296,25 @@ static int z2_open(struct block_device *bdev, fmode_t mode)
set_capacity(z2ram_gendisk, z2ram_size >> 9);
}
+ unlock_kernel();
return 0;
err_out_kfree:
kfree(z2ram_map);
err_out:
+ unlock_kernel();
return rc;
}
static int
z2_release(struct gendisk *disk, fmode_t mode)
{
- if ( current_device == -1 )
- return 0;
-
+ lock_kernel();
+ if ( current_device == -1 ) {
+ unlock_kernel();
+ return 0;
+ }
+ unlock_kernel();
/*
* FIXME: unmap memory
*/
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 1772fd914fb9a..261107d1457c9 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -493,12 +493,18 @@ static struct cdrom_device_ops gdrom_ops = {
static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode)
{
- return cdrom_open(gd.cd_info, bdev, mode);
+ int ret;
+ lock_kernel();
+ ret = cdrom_open(gd.cd_info, bdev, mode);
+ unlock_kernel();
+ return ret;
}
static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode)
{
+ lock_kernel();
cdrom_release(gd.cd_info, mode);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 16dada0627ee6..56bf9f44700c4 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -154,13 +154,21 @@ static const struct file_operations proc_viocd_operations = {
static int viocd_blk_open(struct block_device *bdev, fmode_t mode)
{
struct disk_info *di = bdev->bd_disk->private_data;
- return cdrom_open(&di->viocd_info, bdev, mode);
+ int ret;
+
+ lock_kernel();
+ ret = cdrom_open(&di->viocd_info, bdev, mode);
+ unlock_kernel();
+
+ return ret;
}
static int viocd_blk_release(struct gendisk *disk, fmode_t mode)
{
struct disk_info *di = disk->private_data;
+ lock_kernel();
cdrom_release(&di->viocd_info, mode);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index bf9f61a5c2f86..5108e9739c96a 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1591,17 +1591,19 @@ static struct ide_driver ide_cdrom_driver = {
static int idecd_open(struct block_device *bdev, fmode_t mode)
{
- struct cdrom_info *info = ide_cd_get(bdev->bd_disk);
- int rc = -ENOMEM;
+ struct cdrom_info *info;
+ int rc = -ENXIO;
+ lock_kernel();
+ info = ide_cd_get(bdev->bd_disk);
if (!info)
- return -ENXIO;
+ goto out;
rc = cdrom_open(&info->devinfo, bdev, mode);
-
if (rc < 0)
ide_cd_put(info);
-
+out:
+ unlock_kernel();
return rc;
}
@@ -1609,9 +1611,11 @@ static int idecd_release(struct gendisk *disk, fmode_t mode)
{
struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
+ lock_kernel();
cdrom_release(&info->devinfo, mode);
ide_cd_put(info);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index 883f0c979c9ff..137337a795a97 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -1,3 +1,4 @@
+#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
@@ -237,6 +238,18 @@ static int ide_gd_open(struct block_device *bdev, fmode_t mode)
return ret;
}
+static int ide_gd_unlocked_open(struct block_device *bdev, fmode_t mode)
+{
+ int ret;
+
+ lock_kernel();
+ ret = ide_gd_open(bdev, mode);
+ unlock_kernel();
+
+ return ret;
+}
+
+
static int ide_gd_release(struct gendisk *disk, fmode_t mode)
{
struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
@@ -244,6 +257,7 @@ static int ide_gd_release(struct gendisk *disk, fmode_t mode)
ide_debug_log(IDE_DBG_FUNC, "enter");
+ lock_kernel();
if (idkp->openers == 1)
drive->disk_ops->flush(drive);
@@ -255,6 +269,7 @@ static int ide_gd_release(struct gendisk *disk, fmode_t mode)
idkp->openers--;
ide_disk_put(idkp);
+ unlock_kernel();
return 0;
}
@@ -321,7 +336,7 @@ static int ide_gd_ioctl(struct block_device *bdev, fmode_t mode,
static const struct block_device_operations ide_gd_ops = {
.owner = THIS_MODULE,
- .open = ide_gd_open,
+ .open = ide_gd_unlocked_open,
.release = ide_gd_release,
.ioctl = ide_gd_ioctl,
.getgeo = ide_gd_getgeo,
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 39b0a5c45f07a..6d622cb5ac816 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1907,7 +1907,11 @@ static const struct file_operations idetape_fops = {
static int idetape_open(struct block_device *bdev, fmode_t mode)
{
- struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk, false, 0);
+ struct ide_tape_obj *tape;
+
+ lock_kernel();
+ tape = ide_tape_get(bdev->bd_disk, false, 0);
+ unlock_kernel();
if (!tape)
return -ENXIO;
@@ -1919,7 +1923,10 @@ static int idetape_release(struct gendisk *disk, fmode_t mode)
{
struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);
+ lock_kernel();
ide_tape_put(tape);
+ unlock_kernel();
+
return 0;
}
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index d505a96845c11..a3f21dc02bd89 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -15,6 +15,7 @@
#include <linux/blkpg.h>
#include <linux/bio.h>
#include <linux/buffer_head.h>
+#include <linux/smp_lock.h>
#include <linux/mempool.h>
#include <linux/slab.h>
#include <linux/idr.h>
@@ -338,6 +339,7 @@ static int dm_blk_open(struct block_device *bdev, fmode_t mode)
{
struct mapped_device *md;
+ lock_kernel();
spin_lock(&_minor_lock);
md = bdev->bd_disk->private_data;
@@ -355,6 +357,7 @@ static int dm_blk_open(struct block_device *bdev, fmode_t mode)
out:
spin_unlock(&_minor_lock);
+ unlock_kernel();
return md ? 0 : -ENXIO;
}
@@ -362,8 +365,12 @@ static int dm_blk_open(struct block_device *bdev, fmode_t mode)
static int dm_blk_close(struct gendisk *disk, fmode_t mode)
{
struct mapped_device *md = disk->private_data;
+
+ lock_kernel();
atomic_dec(&md->open_count);
dm_put(md);
+ unlock_kernel();
+
return 0;
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1893af6787790..700c96edf9b25 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -36,6 +36,7 @@
#include <linux/blkdev.h>
#include <linux/sysctl.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/buffer_head.h> /* for invalidate_bdev */
#include <linux/poll.h>
#include <linux/ctype.h>
@@ -5902,6 +5903,7 @@ static int md_open(struct block_device *bdev, fmode_t mode)
mddev_t *mddev = mddev_find(bdev->bd_dev);
int err;
+ lock_kernel();
if (mddev->gendisk != bdev->bd_disk) {
/* we are racing with mddev_put which is discarding this
* bd_disk.
@@ -5910,6 +5912,7 @@ static int md_open(struct block_device *bdev, fmode_t mode)
/* Wait until bdev->bd_disk is definitely gone */
flush_scheduled_work();
/* Then retry the open from the top */
+ unlock_kernel();
return -ERESTARTSYS;
}
BUG_ON(mddev != bdev->bd_disk->private_data);
@@ -5923,6 +5926,7 @@ static int md_open(struct block_device *bdev, fmode_t mode)
check_disk_size_change(mddev->gendisk, bdev);
out:
+ unlock_kernel();
return err;
}
@@ -5931,8 +5935,10 @@ static int md_release(struct gendisk *disk, fmode_t mode)
mddev_t *mddev = disk->private_data;
BUG_ON(!mddev);
+ lock_kernel();
atomic_dec(&mddev->openers);
mddev_put(mddev);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 56645408d225f..eef78a068fd13 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -18,6 +18,7 @@
#include <linux/kthread.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/memstick.h>
#define DRIVER_NAME "mspro_block"
@@ -179,6 +180,7 @@ static int mspro_block_bd_open(struct block_device *bdev, fmode_t mode)
struct mspro_block_data *msb = disk->private_data;
int rc = -ENXIO;
+ lock_kernel();
mutex_lock(&mspro_block_disk_lock);
if (msb && msb->card) {
@@ -190,6 +192,7 @@ static int mspro_block_bd_open(struct block_device *bdev, fmode_t mode)
}
mutex_unlock(&mspro_block_disk_lock);
+ unlock_kernel();
return rc;
}
@@ -221,7 +224,11 @@ static int mspro_block_disk_release(struct gendisk *disk)
static int mspro_block_bd_release(struct gendisk *disk, fmode_t mode)
{
- return mspro_block_disk_release(disk);
+ int ret;
+ lock_kernel();
+ ret = mspro_block_disk_release(disk);
+ unlock_kernel();
+ return ret;
}
static int mspro_block_bd_getgeo(struct block_device *bdev,
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index d1bdf8abe5db9..a5bc3ee0d93e6 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -53,6 +53,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2o.h>
+#include <linux/smp_lock.h>
#include <linux/mempool.h>
@@ -577,6 +578,7 @@ static int i2o_block_open(struct block_device *bdev, fmode_t mode)
if (!dev->i2o_dev)
return -ENODEV;
+ lock_kernel();
if (dev->power > 0x1f)
i2o_block_device_power(dev, 0x02);
@@ -585,6 +587,7 @@ static int i2o_block_open(struct block_device *bdev, fmode_t mode)
i2o_block_device_lock(dev->i2o_dev, -1);
osm_debug("Ready.\n");
+ unlock_kernel();
return 0;
};
@@ -615,6 +618,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
if (!dev->i2o_dev)
return 0;
+ lock_kernel();
i2o_block_device_flush(dev->i2o_dev);
i2o_block_device_unlock(dev->i2o_dev, -1);
@@ -625,6 +629,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
operation = 0x24;
i2o_block_device_power(dev, operation);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index cb9fbc83b0909..8433cde29c8ba 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -29,6 +29,7 @@
#include <linux/kdev_t.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <linux/scatterlist.h>
#include <linux/string_helpers.h>
@@ -107,6 +108,7 @@ static int mmc_blk_open(struct block_device *bdev, fmode_t mode)
struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk);
int ret = -ENXIO;
+ lock_kernel();
if (md) {
if (md->usage == 2)
check_disk_change(bdev);
@@ -117,6 +119,7 @@ static int mmc_blk_open(struct block_device *bdev, fmode_t mode)
ret = -EROFS;
}
}
+ unlock_kernel();
return ret;
}
@@ -125,7 +128,9 @@ static int mmc_blk_release(struct gendisk *disk, fmode_t mode)
{
struct mmc_blk_data *md = disk->private_data;
+ lock_kernel();
mmc_blk_put(md);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 8c83b11a77d59..5ca80aee2ed01 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -165,8 +165,9 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
int ret;
if (!dev)
- return -ERESTARTSYS;
+ return -ERESTARTSYS; /* FIXME: busy loop! -arnd*/
+ lock_kernel();
mutex_lock(&dev->lock);
if (!dev->mtd) {
@@ -183,6 +184,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
unlock:
mutex_unlock(&dev->lock);
blktrans_dev_put(dev);
+ unlock_kernel();
return ret;
}
@@ -194,6 +196,7 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
if (!dev)
return ret;
+ lock_kernel();
mutex_lock(&dev->lock);
/* Release one reference, we sure its not the last one here*/
@@ -206,6 +209,7 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
unlock:
mutex_unlock(&dev->lock);
blktrans_dev_put(dev);
+ unlock_kernel();
return ret;
}
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 17b033d0e0502..1a84fae155e1b 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -21,6 +21,7 @@
#include <linux/hdreg.h>
#include <linux/async.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <asm/ccwdev.h>
#include <asm/ebcdic.h>
@@ -2235,6 +2236,7 @@ static int dasd_open(struct block_device *bdev, fmode_t mode)
if (!block)
return -ENODEV;
+ lock_kernel();
base = block->base;
atomic_inc(&block->open_count);
if (test_bit(DASD_FLAG_OFFLINE, &base->flags)) {
@@ -2269,12 +2271,14 @@ static int dasd_open(struct block_device *bdev, fmode_t mode)
goto out;
}
+ unlock_kernel();
return 0;
out:
module_put(base->discipline->owner);
unlock:
atomic_dec(&block->open_count);
+ unlock_kernel();
return rc;
}
@@ -2282,8 +2286,10 @@ static int dasd_release(struct gendisk *disk, fmode_t mode)
{
struct dasd_block *block = disk->private_data;
+ lock_kernel();
atomic_dec(&block->open_count);
module_put(block->base->discipline->owner);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 9b43ae94beba1..2bd72aa34c59c 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@@ -775,6 +776,7 @@ dcssblk_open(struct block_device *bdev, fmode_t mode)
struct dcssblk_dev_info *dev_info;
int rc;
+ lock_kernel();
dev_info = bdev->bd_disk->private_data;
if (NULL == dev_info) {
rc = -ENODEV;
@@ -784,6 +786,7 @@ dcssblk_open(struct block_device *bdev, fmode_t mode)
bdev->bd_block_size = 4096;
rc = 0;
out:
+ unlock_kernel();
return rc;
}
@@ -794,6 +797,7 @@ dcssblk_release(struct gendisk *disk, fmode_t mode)
struct segment_info *entry;
int rc;
+ lock_kernel();
if (!dev_info) {
rc = -ENODEV;
goto out;
@@ -811,6 +815,7 @@ dcssblk_release(struct gendisk *disk, fmode_t mode)
up_write(&dcssblk_devices_sem);
rc = 0;
out:
+ unlock_kernel();
return rc;
}
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 097da8ce6be66..b7de02525ec90 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -16,6 +16,7 @@
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/blkdev.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/buffer_head.h>
#include <linux/kernel.h>
@@ -361,6 +362,7 @@ tapeblock_open(struct block_device *bdev, fmode_t mode)
struct tape_device * device;
int rc;
+ lock_kernel();
device = tape_get_device(disk->private_data);
if (device->required_tapemarks) {
@@ -384,12 +386,14 @@ tapeblock_open(struct block_device *bdev, fmode_t mode)
* is called.
*/
tape_state_set(device, TS_BLKUSE);
+ unlock_kernel();
return 0;
release:
tape_release(device);
put_device:
tape_put_device(device);
+ unlock_kernel();
return rc;
}
@@ -403,10 +407,12 @@ static int
tapeblock_release(struct gendisk *disk, fmode_t mode)
{
struct tape_device *device = disk->private_data;
-
+
+ lock_kernel();
tape_state_set(device, TS_IN_USE);
tape_release(device);
tape_put_device(device);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 633ac32b25c1b..01680c7c85072 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -795,6 +795,7 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
+ lock_kernel();
sdev = sdkp->device;
/*
@@ -838,10 +839,12 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
}
+ unlock_kernel();
return 0;
error_out:
scsi_disk_put(sdkp);
+ unlock_kernel();
return retval;
}
@@ -863,6 +866,7 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
+ lock_kernel();
if (!--sdkp->openers && sdev->removable) {
if (scsi_block_when_processing_errors(sdev))
scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
@@ -873,6 +877,7 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
* XXX is followed by a "rmmod sd_mod"?
*/
scsi_disk_put(sdkp);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index d42fa6468f41e..ba9c3e0387ce3 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -467,22 +467,27 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
static int sr_block_open(struct block_device *bdev, fmode_t mode)
{
- struct scsi_cd *cd = scsi_cd_get(bdev->bd_disk);
+ struct scsi_cd *cd;
int ret = -ENXIO;
+ lock_kernel();
+ cd = scsi_cd_get(bdev->bd_disk);
if (cd) {
ret = cdrom_open(&cd->cdi, bdev, mode);
if (ret)
scsi_cd_put(cd);
}
+ unlock_kernel();
return ret;
}
static int sr_block_release(struct gendisk *disk, fmode_t mode)
{
struct scsi_cd *cd = scsi_cd(disk);
+ lock_kernel();
cdrom_release(&cd->cdi, mode);
scsi_cd_put(cd);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c
index a9aff90e58e0e..87a11c9293e95 100644
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -25,6 +25,7 @@
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
+#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -1326,6 +1327,7 @@ static int blkvsc_open(struct block_device *bdev, fmode_t mode)
DPRINT_DBG(BLKVSC_DRV, "- users %d disk %s\n", blkdev->users,
blkdev->gd->disk_name);
+ lock_kernel();
spin_lock(&blkdev->lock);
if (!blkdev->users && blkdev->device_type == DVD_TYPE) {
@@ -1337,6 +1339,7 @@ static int blkvsc_open(struct block_device *bdev, fmode_t mode)
blkdev->users++;
spin_unlock(&blkdev->lock);
+ unlock_kernel();
return 0;
}
@@ -1347,6 +1350,7 @@ static int blkvsc_release(struct gendisk *disk, fmode_t mode)
DPRINT_DBG(BLKVSC_DRV, "- users %d disk %s\n", blkdev->users,
blkdev->gd->disk_name);
+ lock_kernel();
spin_lock(&blkdev->lock);
if (blkdev->users == 1) {
spin_unlock(&blkdev->lock);
@@ -1357,6 +1361,7 @@ static int blkvsc_release(struct gendisk *disk, fmode_t mode)
blkdev->users--;
spin_unlock(&blkdev->lock);
+ unlock_kernel();
return 0;
}
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 99d6af8117473..693c2bf5d65e3 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1345,13 +1345,12 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
return ret;
}
- lock_kernel();
restart:
ret = -ENXIO;
disk = get_gendisk(bdev->bd_dev, &partno);
if (!disk)
- goto out_unlock_kernel;
+ goto out;
mutex_lock_nested(&bdev->bd_mutex, for_part);
if (!bdev->bd_openers) {
@@ -1431,7 +1430,6 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
if (for_part)
bdev->bd_part_count++;
mutex_unlock(&bdev->bd_mutex);
- unlock_kernel();
return 0;
out_clear:
@@ -1444,9 +1442,7 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
bdev->bd_contains = NULL;
out_unlock_bdev:
mutex_unlock(&bdev->bd_mutex);
- out_unlock_kernel:
- unlock_kernel();
-
+ out:
if (disk)
module_put(disk->fops->owner);
put_disk(disk);
@@ -1515,7 +1511,6 @@ static int __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part)
struct block_device *victim = NULL;
mutex_lock_nested(&bdev->bd_mutex, for_part);
- lock_kernel();
if (for_part)
bdev->bd_part_count--;
@@ -1540,7 +1535,6 @@ static int __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part)
victim = bdev->bd_contains;
bdev->bd_contains = NULL;
}
- unlock_kernel();
mutex_unlock(&bdev->bd_mutex);
bdput(bdev);
if (victim)
--
GitLab
From 62c2a7d969f30163f733c81158254b3095b23e72 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 7 Jul 2010 16:51:26 +0200
Subject: [PATCH 318/863] block: push BKL into blktrace ioctls
The blktrace driver currently needs the BKL, but
we should not need to take that in the block layer,
so just push it down into the driver itself.
It is quite likely that the BKL is not actually
required in blktrace code and could be removed
in a follow-on patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/compat_ioctl.c | 56 ------------------------------------
block/ioctl.c | 2 --
include/linux/blktrace_api.h | 12 ++++++++
kernel/trace/blktrace.c | 43 +++++++++++++++++++++++++++
4 files changed, 55 insertions(+), 58 deletions(-)
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index f26051f446814..d530856377318 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -535,56 +535,6 @@ static int compat_fd_ioctl(struct block_device *bdev, fmode_t mode,
return err;
}
-struct compat_blk_user_trace_setup {
- char name[32];
- u16 act_mask;
- u32 buf_size;
- u32 buf_nr;
- compat_u64 start_lba;
- compat_u64 end_lba;
- u32 pid;
-};
-#define BLKTRACESETUP32 _IOWR(0x12, 115, struct compat_blk_user_trace_setup)
-
-static int compat_blk_trace_setup(struct block_device *bdev, char __user *arg)
-{
- struct blk_user_trace_setup buts;
- struct compat_blk_user_trace_setup cbuts;
- struct request_queue *q;
- char b[BDEVNAME_SIZE];
- int ret;
-
- q = bdev_get_queue(bdev);
- if (!q)
- return -ENXIO;
-
- if (copy_from_user(&cbuts, arg, sizeof(cbuts)))
- return -EFAULT;
-
- bdevname(bdev, b);
-
- buts = (struct blk_user_trace_setup) {
- .act_mask = cbuts.act_mask,
- .buf_size = cbuts.buf_size,
- .buf_nr = cbuts.buf_nr,
- .start_lba = cbuts.start_lba,
- .end_lba = cbuts.end_lba,
- .pid = cbuts.pid,
- };
- memcpy(&buts.name, &cbuts.name, 32);
-
- mutex_lock(&bdev->bd_mutex);
- ret = do_blk_trace_setup(q, b, bdev->bd_dev, bdev, &buts);
- mutex_unlock(&bdev->bd_mutex);
- if (ret)
- return ret;
-
- if (copy_to_user(arg, &buts.name, 32))
- return -EFAULT;
-
- return 0;
-}
-
static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
@@ -802,16 +752,10 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
return compat_put_u64(arg, bdev->bd_inode->i_size);
case BLKTRACESETUP32:
- lock_kernel();
- ret = compat_blk_trace_setup(bdev, compat_ptr(arg));
- unlock_kernel();
- return ret;
case BLKTRACESTART: /* compatible */
case BLKTRACESTOP: /* compatible */
case BLKTRACETEARDOWN: /* compatible */
- lock_kernel();
ret = blk_trace_ioctl(bdev, cmd, compat_ptr(arg));
- unlock_kernel();
return ret;
default:
if (disk->fops->compat_ioctl)
diff --git a/block/ioctl.c b/block/ioctl.c
index 1cfa8d449d90d..9d91e830b3209 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -320,9 +320,7 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
case BLKTRACESTOP:
case BLKTRACESETUP:
case BLKTRACETEARDOWN:
- lock_kernel();
ret = blk_trace_ioctl(bdev, cmd, (char __user *) arg);
- unlock_kernel();
break;
default:
ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg);
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 23faa67e80223..07c698621ad09 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -5,6 +5,7 @@
#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/relay.h>
+#include <linux/compat.h>
#endif
/*
@@ -203,6 +204,17 @@ extern int blk_trace_init_sysfs(struct device *dev);
extern struct attribute_group blk_trace_attr_group;
+struct compat_blk_user_trace_setup {
+ char name[32];
+ u16 act_mask;
+ u32 buf_size;
+ u32 buf_nr;
+ compat_u64 start_lba;
+ compat_u64 end_lba;
+ u32 pid;
+};
+#define BLKTRACESETUP32 _IOWR(0x12, 115, struct compat_blk_user_trace_setup)
+
#else /* !CONFIG_BLK_DEV_IO_TRACE */
# define blk_trace_ioctl(bdev, cmd, arg) (-ENOTTY)
# define blk_trace_shutdown(q) do { } while (0)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 3b4a695051b60..82499a5bdcb7c 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -552,6 +552,41 @@ int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
}
EXPORT_SYMBOL_GPL(blk_trace_setup);
+#if defined(CONFIG_COMPAT) && defined(CONFIG_X86_64)
+static int compat_blk_trace_setup(struct request_queue *q, char *name,
+ dev_t dev, struct block_device *bdev,
+ char __user *arg)
+{
+ struct blk_user_trace_setup buts;
+ struct compat_blk_user_trace_setup cbuts;
+ int ret;
+
+ if (copy_from_user(&cbuts, arg, sizeof(cbuts)))
+ return -EFAULT;
+
+ buts = (struct blk_user_trace_setup) {
+ .act_mask = cbuts.act_mask,
+ .buf_size = cbuts.buf_size,
+ .buf_nr = cbuts.buf_nr,
+ .start_lba = cbuts.start_lba,
+ .end_lba = cbuts.end_lba,
+ .pid = cbuts.pid,
+ };
+ memcpy(&buts.name, &cbuts.name, 32);
+
+ ret = do_blk_trace_setup(q, name, dev, bdev, &buts);
+ if (ret)
+ return ret;
+
+ if (copy_to_user(arg, &buts.name, 32)) {
+ blk_trace_remove(q);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+#endif
+
int blk_trace_startstop(struct request_queue *q, int start)
{
int ret;
@@ -604,6 +639,7 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
if (!q)
return -ENXIO;
+ lock_kernel();
mutex_lock(&bdev->bd_mutex);
switch (cmd) {
@@ -611,6 +647,12 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
bdevname(bdev, b);
ret = blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
break;
+#if defined(CONFIG_COMPAT) && defined(CONFIG_X86_64)
+ case BLKTRACESETUP32:
+ bdevname(bdev, b);
+ ret = compat_blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
+ break;
+#endif
case BLKTRACESTART:
start = 1;
case BLKTRACESTOP:
@@ -625,6 +667,7 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
}
mutex_unlock(&bdev->bd_mutex);
+ unlock_kernel();
return ret;
}
--
GitLab
From 6de43703108bb1d3fc9495b3e8107d6ec72f97e4 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 7 Jul 2010 16:51:27 +0200
Subject: [PATCH 319/863] block: remove BKL from BLKROSET and BLKFLSBUF
We only call the functions set_device_ro(),
invalidate_bdev(), sync_filesystem() and sync_blockdev()
while holding the BKL in these commands. All
of these are also done in other code paths without
the BKL, which leads me to the conclusion that
the BKL is not needed here either.
The reason we hold it here is that it was originally
pushed down into the ioctl function from vfs_ioctl.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/ioctl.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/block/ioctl.c b/block/ioctl.c
index 9d91e830b3209..60f477c91eef0 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -197,10 +197,8 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
if (ret != -EINVAL && ret != -ENOTTY)
return ret;
- lock_kernel();
fsync_bdev(bdev);
invalidate_bdev(bdev);
- unlock_kernel();
return 0;
case BLKROSET:
@@ -212,9 +210,7 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
return -EACCES;
if (get_user(n, (int __user *)(arg)))
return -EFAULT;
- lock_kernel();
set_device_ro(bdev, n);
- unlock_kernel();
return 0;
case BLKDISCARD: {
--
GitLab
From 15392efb9d427482754f6d267262452878667499 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 7 Jul 2010 16:51:28 +0200
Subject: [PATCH 320/863] block: remove BKL from partition ioctls
The blkpg_ioctl and blkdev_reread_part access fields of
the bdev and gendisk structures, yet they always do so
under the protection of bdev->bd_mutex, which seems
sufficient.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
cked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/ioctl.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/block/ioctl.c b/block/ioctl.c
index 60f477c91eef0..09fd7f1ef23a4 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -296,14 +296,10 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
bd_release(bdev);
return ret;
case BLKPG:
- lock_kernel();
ret = blkpg_ioctl(bdev, (struct blkpg_ioctl_arg __user *) arg);
- unlock_kernel();
break;
case BLKRRPART:
- lock_kernel();
ret = blkdev_reread_part(bdev);
- unlock_kernel();
break;
case BLKGETSIZE:
size = bdev->bd_inode->i_size;
--
GitLab
From 409f3499a2cfcd1e9c2857c53af7fcce069f027f Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 7 Jul 2010 16:51:29 +0200
Subject: [PATCH 321/863] scsi/sd: remove big kernel lock
Every user of the BKL in the sd driver is the
result of the pushdown from the block layer
into the open/close/ioctl functions.
The only place that used to rely on the BKL is
the sdkp->openers variable, which gets converted
into an atomic_t.
Nothing else seems to rely on the BKL, since the
functions do not touch global data without holding
another lock, and the open/close functions are
still protected from concurrent execution using
the bdev->bd_mutex.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/sd.c | 17 +++++++----------
drivers/scsi/sd.h | 2 +-
2 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 01680c7c85072..fc5d69a84af5f 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -783,6 +783,8 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
* or from within the kernel (e.g. as a result of a mount(1) ).
* In the latter case @inode and @filp carry an abridged amount
* of information as noted above.
+ *
+ * Locking: called with bdev->bd_mutex held.
**/
static int sd_open(struct block_device *bdev, fmode_t mode)
{
@@ -795,7 +797,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
- lock_kernel();
sdev = sdkp->device;
/*
@@ -834,17 +835,15 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
if (!scsi_device_online(sdev))
goto error_out;
- if (!sdkp->openers++ && sdev->removable) {
+ if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
if (scsi_block_when_processing_errors(sdev))
scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
}
- unlock_kernel();
return 0;
error_out:
scsi_disk_put(sdkp);
- unlock_kernel();
return retval;
}
@@ -858,6 +857,8 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
*
* Note: may block (uninterruptible) if error recovery is underway
* on this disk.
+ *
+ * Locking: called with bdev->bd_mutex held.
**/
static int sd_release(struct gendisk *disk, fmode_t mode)
{
@@ -866,8 +867,7 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
- lock_kernel();
- if (!--sdkp->openers && sdev->removable) {
+ if (atomic_dec_return(&sdkp->openers) && sdev->removable) {
if (scsi_block_when_processing_errors(sdev))
scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
}
@@ -877,7 +877,6 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
* XXX is followed by a "rmmod sd_mod"?
*/
scsi_disk_put(sdkp);
- unlock_kernel();
return 0;
}
@@ -930,7 +929,6 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
SCSI_LOG_IOCTL(1, printk("sd_ioctl: disk=%s, cmd=0x%x\n",
disk->disk_name, cmd));
- lock_kernel();
/*
* If we are in the middle of error recovery, don't let anyone
* else try and use this device. Also, if error recovery fails, it
@@ -960,7 +958,6 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
break;
}
out:
- unlock_kernel();
return error;
}
@@ -2346,7 +2343,7 @@ static int sd_probe(struct device *dev)
sdkp->driver = &sd_template;
sdkp->disk = gd;
sdkp->index = index;
- sdkp->openers = 0;
+ atomic_set(&sdkp->openers, 0);
sdkp->previous_state = 1;
if (!sdp->request_queue->rq_timeout) {
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 43d3caf268efb..f81a9309e6de4 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -47,7 +47,7 @@ struct scsi_disk {
struct scsi_device *device;
struct device dev;
struct gendisk *disk;
- unsigned int openers; /* protected by BKL for now, yuck */
+ atomic_t openers;
sector_t capacity; /* size in 512-byte sectors */
u32 index;
unsigned short hw_sector_size;
--
GitLab
From 2daa672b1a736d41b3e7a2e3a05f1909a1f96530 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 8 Jul 2010 14:57:03 +0200
Subject: [PATCH 322/863] scsi/i2o: restore ioctl changes
This restores the changes from "scsi/i2o_block: cleanup ioctl
handling", which accidentally got reverted.
Origignal changelog:
This fixes the ioctl function of the i2o_block driver, which
has multiple problems:
* The BLKI2OSRSTRAT and BLKI2OSWSTRAT commands always return
-ENOTTY on success, where they should return 0.
* Support for 32 bit compat is missing
* The driver should use the .ioctl function and because
.locked_ioctl is going away.
The use of the big kernel lock remains for now, but gets
made explictit in the ioctl function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/message/i2o/i2o_block.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index a5bc3ee0d93e6..e6733bc99724b 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -657,30 +657,40 @@ static int i2o_block_ioctl(struct block_device *bdev, fmode_t mode,
{
struct gendisk *disk = bdev->bd_disk;
struct i2o_block_device *dev = disk->private_data;
+ int ret = -ENOTTY;
/* Anyone capable of this syscall can do *real bad* things */
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ lock_kernel();
switch (cmd) {
case BLKI2OGRSTRAT:
- return put_user(dev->rcache, (int __user *)arg);
+ ret = put_user(dev->rcache, (int __user *)arg);
+ break;
case BLKI2OGWSTRAT:
- return put_user(dev->wcache, (int __user *)arg);
+ ret = put_user(dev->wcache, (int __user *)arg);
+ break;
case BLKI2OSRSTRAT:
+ ret = -EINVAL;
if (arg < 0 || arg > CACHE_SMARTFETCH)
- return -EINVAL;
+ break;
dev->rcache = arg;
+ ret = 0;
break;
case BLKI2OSWSTRAT:
+ ret = -EINVAL;
if (arg != 0
&& (arg < CACHE_WRITETHROUGH || arg > CACHE_SMARTBACK))
- return -EINVAL;
+ break;
dev->wcache = arg;
+ ret = 0;
break;
}
- return -ENOTTY;
+ unlock_kernel();
+
+ return ret;
};
/**
@@ -936,6 +946,7 @@ static const struct block_device_operations i2o_block_fops = {
.open = i2o_block_open,
.release = i2o_block_release,
.ioctl = i2o_block_ioctl,
+ .compat_ioctl = i2o_block_ioctl,
.getgeo = i2o_block_getgeo,
.media_changed = i2o_block_media_changed
};
--
GitLab
From 2669b19fa4debcdd6a660ace1a124c0900f113e6 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Fri, 9 Jul 2010 14:24:38 +1000
Subject: [PATCH 323/863] block: fix for block tracing build error
block/compat_ioctl.c: In function 'compat_blkdev_ioctl':
block/compat_ioctl.c:754: error: 'BLKTRACESETUP32' undeclared (first use in this function)
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/blktrace_api.h | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 07c698621ad09..3395cf7130f5d 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -204,17 +204,6 @@ extern int blk_trace_init_sysfs(struct device *dev);
extern struct attribute_group blk_trace_attr_group;
-struct compat_blk_user_trace_setup {
- char name[32];
- u16 act_mask;
- u32 buf_size;
- u32 buf_nr;
- compat_u64 start_lba;
- compat_u64 end_lba;
- u32 pid;
-};
-#define BLKTRACESETUP32 _IOWR(0x12, 115, struct compat_blk_user_trace_setup)
-
#else /* !CONFIG_BLK_DEV_IO_TRACE */
# define blk_trace_ioctl(bdev, cmd, arg) (-ENOTTY)
# define blk_trace_shutdown(q) do { } while (0)
@@ -232,6 +221,21 @@ static inline int blk_trace_init_sysfs(struct device *dev)
#endif /* CONFIG_BLK_DEV_IO_TRACE */
+#ifdef CONFIG_COMPAT
+
+struct compat_blk_user_trace_setup {
+ char name[32];
+ u16 act_mask;
+ u32 buf_size;
+ u32 buf_nr;
+ compat_u64 start_lba;
+ compat_u64 end_lba;
+ u32 pid;
+};
+#define BLKTRACESETUP32 _IOWR(0x12, 115, struct compat_blk_user_trace_setup)
+
+#endif
+
#if defined(CONFIG_EVENT_TRACING) && defined(CONFIG_BLOCK)
static inline int blk_cmd_buf_len(struct request *rq)
--
GitLab
From f10d9f617a65905c556c3b37c9b9646ae7d04ed7 Mon Sep 17 00:00:00 2001
From: Dave Chinner <dchinner@redhat.com>
Date: Tue, 13 Jul 2010 17:50:50 +1000
Subject: [PATCH 324/863] blkdev: check for valid request queue before issuing
flush
Issuing a blkdev_issue_flush() on an unconfigured loop device causes a panic as
q->make_request_fn is not configured. This can occur when trying to mount the
unconfigured loop device as an XFS filesystem. There are no guards that catch
the bio before the request function is called because we don't add a payload to
the bio. Instead, manually check this case as soon as we have a pointer to the
queue to flush.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-barrier.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index eefbde8353089..557f69360b6a0 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -310,6 +310,15 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
if (!q)
return -ENXIO;
+ /*
+ * some block devices may not have their queue correctly set up here
+ * (e.g. loop device without a backing file) and so issuing a flush
+ * here will panic. Ensure there is a request function before issuing
+ * the barrier.
+ */
+ if (!q->make_request_fn)
+ return -ENXIO;
+
bio = bio_alloc(gfp_mask, 0);
bio->bi_end_io = bio_end_empty_barrier;
bio->bi_bdev = bdev;
--
GitLab
From 10d1f9e2ccfff40665a00ea0e0a0d11e54c9cbb1 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Thu, 15 Jul 2010 10:49:31 -0600
Subject: [PATCH 325/863] block: fix problem with sending down discard that
isn't of correct granularity
If the queue doesn't have a limit set, or it just set UINT_MAX like
we default to, we coud be sending down a discard request that isn't
of the correct granularity if the block size is > 512b.
Fix this by adjusting max_discard_sectors down to the proper
alignment.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-lib.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/block/blk-lib.c b/block/blk-lib.c
index e16185b0d8e14..5d793e143f3c7 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -41,6 +41,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
struct request_queue *q = bdev_get_queue(bdev);
int type = flags & BLKDEV_IFL_BARRIER ?
DISCARD_BARRIER : DISCARD_NOBARRIER;
+ unsigned int max_discard_sectors;
struct bio *bio;
int ret = 0;
@@ -50,10 +51,18 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
- while (nr_sects && !ret) {
- unsigned int max_discard_sectors =
- min(q->limits.max_discard_sectors, UINT_MAX >> 9);
+ /*
+ * Ensure that max_discard_sectors is of the proper
+ * granularity
+ */
+ max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9);
+ if (q->limits.discard_granularity) {
+ unsigned int disc_sects = q->limits.discard_granularity >> 9;
+ max_discard_sectors &= ~(disc_sects - 1);
+ }
+
+ while (nr_sects && !ret) {
bio = bio_alloc(gfp_mask, 1);
if (!bio) {
ret = -ENOMEM;
--
GitLab
From 96dccab1d63cb35d3f5e75d2ef275fdbff4d5f3b Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 19 Jul 2010 16:49:17 -0700
Subject: [PATCH 326/863] writeback.h: needs linux/device.h
include/trace/events/writeback.h uses dev_name(), so it needs to
include linux/device.h.
include/trace/events/writeback.h:12: error: implicit declaration of function 'dev_name'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/trace/events/writeback.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index bde92e07fa4f6..84ab72df953cb 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -5,6 +5,7 @@
#define _TRACE_WRITEBACK_H
#include <linux/backing-dev.h>
+#include <linux/device.h>
#include <linux/writeback.h>
struct wb_writeback_work;
--
GitLab
From 203fd61f42fec81f43bc5abbf2d3755e04e000af Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Fri, 4 Dec 2009 15:33:54 +0000
Subject: [PATCH 327/863] xen: use less generic names in blkfront driver.
All Xen frontend drivers have a couple of identically named functions which
makes figuring out which device went wrong from a stacktrace harder than it
needs to be. Rename them to something specificto the device type.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 91374282755db..304009e77c73a 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -651,7 +651,7 @@ static int setup_blkring(struct xenbus_device *dev,
/* Common code used when first setting up, and when resuming. */
-static int talk_to_backend(struct xenbus_device *dev,
+static int talk_to_blkback(struct xenbus_device *dev,
struct blkfront_info *info)
{
const char *message = NULL;
@@ -756,7 +756,7 @@ static int blkfront_probe(struct xenbus_device *dev,
info->handle = simple_strtoul(strrchr(dev->nodename, '/')+1, NULL, 0);
dev_set_drvdata(&dev->dev, info);
- err = talk_to_backend(dev, info);
+ err = talk_to_blkback(dev, info);
if (err) {
kfree(info);
dev_set_drvdata(&dev->dev, NULL);
@@ -851,7 +851,7 @@ static int blkfront_resume(struct xenbus_device *dev)
blkif_free(info, info->connected == BLKIF_STATE_CONNECTED);
- err = talk_to_backend(dev, info);
+ err = talk_to_blkback(dev, info);
if (info->connected == BLKIF_STATE_SUSPENDED && !err)
err = blkif_recover(info);
@@ -955,13 +955,13 @@ static void blkfront_closing(struct xenbus_device *dev)
/**
* Callback received when the backend's state changes.
*/
-static void backend_changed(struct xenbus_device *dev,
+static void blkback_changed(struct xenbus_device *dev,
enum xenbus_state backend_state)
{
struct blkfront_info *info = dev_get_drvdata(&dev->dev);
struct block_device *bd;
- dev_dbg(&dev->dev, "blkfront:backend_changed.\n");
+ dev_dbg(&dev->dev, "blkfront:blkback_changed to state %d.\n", backend_state);
switch (backend_state) {
case XenbusStateInitialising:
@@ -1068,7 +1068,7 @@ static struct xenbus_driver blkfront = {
.probe = blkfront_probe,
.remove = blkfront_remove,
.resume = blkfront_resume,
- .otherend_changed = backend_changed,
+ .otherend_changed = blkback_changed,
.is_ready = blkfront_is_ready,
};
--
GitLab
From 0e34582699392d67910bd3919bc8fd9bedce115e Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Sat, 7 Aug 2010 18:28:55 +0200
Subject: [PATCH 328/863] blkfront: fixes for 'xm block-detach ... --force'
Prevent prematurely freeing 'struct blkfront_info' instances (when the
xenbus data structures are gone, but the Linux ones are still needed).
Prevent adding a disk with the same (major, minor) [and hence the same
name and sysfs entries, which leads to oopses] when the previous
instance wasn't fully de-allocated yet.
This still doesn't address all issues resulting from forced detach:
I/O submitted after the detach still blocks forever, likely preventing
subsequent un-mounting from completing. It's not clear to me (not
knowing much about the block layer) how this can be avoided.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 88 +++++++++++++++++++++++++++++++++---
1 file changed, 81 insertions(+), 7 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 304009e77c73a..22091e4e401f4 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -105,6 +105,10 @@ struct blkfront_info
static DEFINE_SPINLOCK(blkif_io_lock);
+static unsigned int nr_minors;
+static unsigned long *minors;
+static DEFINE_SPINLOCK(minor_lock);
+
#define MAXIMUM_OUTSTANDING_BLOCK_REQS \
(BLKIF_MAX_SEGMENTS_PER_REQUEST * BLK_RING_SIZE)
#define GRANT_INVALID_REF 0
@@ -139,6 +143,55 @@ static void add_id_to_freelist(struct blkfront_info *info,
info->shadow_free = id;
}
+static int xlbd_reserve_minors(unsigned int minor, unsigned int nr)
+{
+ unsigned int end = minor + nr;
+ int rc;
+
+ if (end > nr_minors) {
+ unsigned long *bitmap, *old;
+
+ bitmap = kzalloc(BITS_TO_LONGS(end) * sizeof(*bitmap),
+ GFP_KERNEL);
+ if (bitmap == NULL)
+ return -ENOMEM;
+
+ spin_lock(&minor_lock);
+ if (end > nr_minors) {
+ old = minors;
+ memcpy(bitmap, minors,
+ BITS_TO_LONGS(nr_minors) * sizeof(*bitmap));
+ minors = bitmap;
+ nr_minors = BITS_TO_LONGS(end) * BITS_PER_LONG;
+ } else
+ old = bitmap;
+ spin_unlock(&minor_lock);
+ kfree(old);
+ }
+
+ spin_lock(&minor_lock);
+ if (find_next_bit(minors, end, minor) >= end) {
+ for (; minor < end; ++minor)
+ __set_bit(minor, minors);
+ rc = 0;
+ } else
+ rc = -EBUSY;
+ spin_unlock(&minor_lock);
+
+ return rc;
+}
+
+static void xlbd_release_minors(unsigned int minor, unsigned int nr)
+{
+ unsigned int end = minor + nr;
+
+ BUG_ON(end > nr_minors);
+ spin_lock(&minor_lock);
+ for (; minor < end; ++minor)
+ __clear_bit(minor, minors);
+ spin_unlock(&minor_lock);
+}
+
static void blkif_restart_queue_callback(void *arg)
{
struct blkfront_info *info = (struct blkfront_info *)arg;
@@ -417,9 +470,14 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
if ((minor % nr_parts) == 0)
nr_minors = nr_parts;
+ err = xlbd_reserve_minors(minor, nr_minors);
+ if (err)
+ goto out;
+ err = -ENODEV;
+
gd = alloc_disk(nr_minors);
if (gd == NULL)
- goto out;
+ goto release;
offset = minor / nr_parts;
@@ -450,7 +508,7 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
if (xlvbd_init_blk_queue(gd, sector_size)) {
del_gendisk(gd);
- goto out;
+ goto release;
}
info->rq = gd->queue;
@@ -470,6 +528,8 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
return 0;
+ release:
+ xlbd_release_minors(minor, nr_minors);
out:
return err;
}
@@ -924,6 +984,7 @@ static void blkfront_connect(struct blkfront_info *info)
static void blkfront_closing(struct xenbus_device *dev)
{
struct blkfront_info *info = dev_get_drvdata(&dev->dev);
+ unsigned int minor, nr_minors;
unsigned long flags;
dev_dbg(&dev->dev, "blkfront_closing: %s removed\n", dev->nodename);
@@ -946,7 +1007,10 @@ static void blkfront_closing(struct xenbus_device *dev)
blk_cleanup_queue(info->rq);
info->rq = NULL;
+ minor = info->gd->first_minor;
+ nr_minors = info->gd->minors;
del_gendisk(info->gd);
+ xlbd_release_minors(minor, nr_minors);
out:
xenbus_frontend_closed(dev);
@@ -1004,7 +1068,10 @@ static int blkfront_remove(struct xenbus_device *dev)
blkif_free(info, 0);
- kfree(info);
+ if(info->users == 0)
+ kfree(info);
+ else
+ info->is_ready = -1;
return 0;
}
@@ -1013,18 +1080,22 @@ static int blkfront_is_ready(struct xenbus_device *dev)
{
struct blkfront_info *info = dev_get_drvdata(&dev->dev);
- return info->is_ready;
+ return info->is_ready > 0;
}
static int blkif_open(struct block_device *bdev, fmode_t mode)
{
struct blkfront_info *info = bdev->bd_disk->private_data;
+ int ret = 0;
lock_kernel();
- info->users++;
+ if (info->is_ready < 0)
+ ret = -ENODEV;
+ else
+ info->users++;
unlock_kernel();
- return 0;
+ return ret;
}
static int blkif_release(struct gendisk *disk, fmode_t mode)
@@ -1039,7 +1110,10 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
struct xenbus_device *dev = info->xbdev;
enum xenbus_state state = xenbus_read_driver_state(dev->otherend);
- if (state == XenbusStateClosing && info->is_ready)
+ if(info->is_ready < 0) {
+ blkfront_closing(dev);
+ kfree(info);
+ } else if (state == XenbusStateClosing && info->is_ready)
blkfront_closing(dev);
}
unlock_kernel();
--
GitLab
From 5d7ed20e822ef82117a4d9928b030fa0247b789d Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Sat, 7 Aug 2010 18:31:12 +0200
Subject: [PATCH 329/863] blkfront: don't access freed struct xenbus_device
Unfortunately commit "blkfront: fixes for 'xm block-detach ... --force'"
still wasn't quite right - there was a reference to freed memory left
from blkfront_closing().
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 34 ++++++++++++++++------------------
1 file changed, 16 insertions(+), 18 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 22091e4e401f4..60006b730872b 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -981,13 +981,11 @@ static void blkfront_connect(struct blkfront_info *info)
* the backend. Once is this done, we can switch to Closed in
* acknowledgement.
*/
-static void blkfront_closing(struct xenbus_device *dev)
+static void blkfront_closing(struct blkfront_info *info)
{
- struct blkfront_info *info = dev_get_drvdata(&dev->dev);
unsigned int minor, nr_minors;
unsigned long flags;
- dev_dbg(&dev->dev, "blkfront_closing: %s removed\n", dev->nodename);
if (info->rq == NULL)
goto out;
@@ -1013,7 +1011,8 @@ static void blkfront_closing(struct xenbus_device *dev)
xlbd_release_minors(minor, nr_minors);
out:
- xenbus_frontend_closed(dev);
+ if (info->xbdev)
+ xenbus_frontend_closed(info->xbdev);
}
/**
@@ -1053,7 +1052,7 @@ static void blkback_changed(struct xenbus_device *dev,
xenbus_dev_error(dev, -EBUSY,
"Device in use; refusing to close");
else
- blkfront_closing(dev);
+ blkfront_closing(info);
mutex_unlock(&bd->bd_mutex);
bdput(bd);
break;
@@ -1071,7 +1070,7 @@ static int blkfront_remove(struct xenbus_device *dev)
if(info->users == 0)
kfree(info);
else
- info->is_ready = -1;
+ info->xbdev = NULL;
return 0;
}
@@ -1080,22 +1079,21 @@ static int blkfront_is_ready(struct xenbus_device *dev)
{
struct blkfront_info *info = dev_get_drvdata(&dev->dev);
- return info->is_ready > 0;
+ return info->is_ready && info->xbdev;
}
static int blkif_open(struct block_device *bdev, fmode_t mode)
{
struct blkfront_info *info = bdev->bd_disk->private_data;
- int ret = 0;
+
+ if (!info->xbdev)
+ return -ENODEV;
lock_kernel();
- if (info->is_ready < 0)
- ret = -ENODEV;
- else
- info->users++;
+ info->users++;
unlock_kernel();
- return ret;
+ return 0;
}
static int blkif_release(struct gendisk *disk, fmode_t mode)
@@ -1108,13 +1106,13 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
have ignored this request initially, as the device was
still mounted. */
struct xenbus_device *dev = info->xbdev;
- enum xenbus_state state = xenbus_read_driver_state(dev->otherend);
- if(info->is_ready < 0) {
- blkfront_closing(dev);
+ if (!dev) {
+ blkfront_closing(info);
kfree(info);
- } else if (state == XenbusStateClosing && info->is_ready)
- blkfront_closing(dev);
+ } else if (xenbus_read_driver_state(dev->otherend)
+ == XenbusStateClosing && info->is_ready)
+ blkfront_closing(info);
}
unlock_kernel();
return 0;
--
GitLab
From 1fa73be6be65028a7543bba8f14474b42e064a1b Mon Sep 17 00:00:00 2001
From: "K. Y. Srinivasan" <ksrinivasan@novell.com>
Date: Thu, 11 Mar 2010 13:42:26 -0800
Subject: [PATCH 330/863] xen/front: Propagate changed size of VBDs
Support dynamic resizing of virtual block devices. This patch supports
both file backed block devices as well as physical devices that can be
dynamically resized on the host side.
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 60006b730872b..f47b0961fab13 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -930,9 +930,24 @@ static void blkfront_connect(struct blkfront_info *info)
unsigned int binfo;
int err;
- if ((info->connected == BLKIF_STATE_CONNECTED) ||
- (info->connected == BLKIF_STATE_SUSPENDED) )
+ switch (info->connected) {
+ case BLKIF_STATE_CONNECTED:
+ /*
+ * Potentially, the back-end may be signalling
+ * a capacity change; update the capacity.
+ */
+ err = xenbus_scanf(XBT_NIL, info->xbdev->otherend,
+ "sectors", "%Lu", §ors);
+ if (XENBUS_EXIST_ERR(err))
+ return;
+ printk(KERN_INFO "Setting capacity to %Lu\n",
+ sectors);
+ set_capacity(info->gd, sectors);
+
+ /* fall through */
+ case BLKIF_STATE_SUSPENDED:
return;
+ }
dev_dbg(&info->xbdev->dev, "%s:%s.\n",
__func__, info->xbdev->otherend);
--
GitLab
From b4dddb498c0feaff413b2a79c64e910021983775 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 11 Mar 2010 15:10:40 -0800
Subject: [PATCH 331/863] xen/blkfront: avoid compiler warning from missing
cases
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Fix:
drivers/block/xen-blkfront.c: In function ‘blkfront_connect’:
drivers/block/xen-blkfront.c:933: warning: enumeration value ‘BLKIF_STATE_DISCONNECTED’ not handled in switch
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index f47b0961fab13..9b440221755d7 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -947,6 +947,9 @@ static void blkfront_connect(struct blkfront_info *info)
/* fall through */
case BLKIF_STATE_SUSPENDED:
return;
+
+ default:
+ break;
}
dev_dbg(&info->xbdev->dev, "%s:%s.\n",
--
GitLab
From 2def141e71d54eccac98dc2c2ba71a82c91b324e Mon Sep 17 00:00:00 2001
From: "K. Y. Srinivasan" <ksrinivasan@novell.com>
Date: Thu, 18 Mar 2010 15:00:54 -0700
Subject: [PATCH 332/863] xen/blkfront: revalidate after setting capacity
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 9b440221755d7..7fa2a1db51e68 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -943,6 +943,7 @@ static void blkfront_connect(struct blkfront_info *info)
printk(KERN_INFO "Setting capacity to %Lu\n",
sectors);
set_capacity(info->gd, sectors);
+ revalidate_disk(info->gd);
/* fall through */
case BLKIF_STATE_SUSPENDED:
--
GitLab
From 5b61cb90c2ad8c853b4dd53eec200bacd2f02172 Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Fri, 30 Apr 2010 22:01:15 +0000
Subject: [PATCH 333/863] xenbus: Make xenbus_switch_state transactional
According to the comments, this was how it's been done years ago, but
apparently took an xbt pointer from elsewhere back then. The code was
removed because of consistency issues: cancellation wont't roll back
the saved xbdev->state.
Still, unsolicited writes to the state field remain an issue,
especially if device shutdown takes thread synchronization, and subtle
races cause accidental recreation of the device node.
Fixed by reintroducing the transaction. An internal one is sufficient,
so the xbdev->state value remains consistent.
Also fixes the original hack to prevent infinite recursion. Instead of
bailing out on the first attempt to switch to Closing, checks call
depth now.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/xen/xenbus/xenbus_client.c | 90 ++++++++++++++++++++++--------
1 file changed, 66 insertions(+), 24 deletions(-)
diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index 7b3e973a1aee8..7e49527189b6c 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -133,17 +133,12 @@ int xenbus_watch_pathfmt(struct xenbus_device *dev,
}
EXPORT_SYMBOL_GPL(xenbus_watch_pathfmt);
+static void xenbus_switch_fatal(struct xenbus_device *, int, int,
+ const char *, ...);
-/**
- * xenbus_switch_state
- * @dev: xenbus device
- * @state: new state
- *
- * Advertise in the store a change of the given driver to the given new_state.
- * Return 0 on success, or -errno on error. On error, the device will switch
- * to XenbusStateClosing, and the error will be saved in the store.
- */
-int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state state)
+static int
+__xenbus_switch_state(struct xenbus_device *dev,
+ enum xenbus_state state, int depth)
{
/* We check whether the state is currently set to the given value, and
if not, then the state is set. We don't want to unconditionally
@@ -152,35 +147,65 @@ int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state state)
to it, as the device will be tearing down, and we don't want to
resurrect that directory.
- Note that, because of this cached value of our state, this function
- will not work inside a Xenstore transaction (something it was
- trying to in the past) because dev->state would not get reset if
- the transaction was aborted.
-
+ Note that, because of this cached value of our state, this
+ function will not take a caller's Xenstore transaction
+ (something it was trying to in the past) because dev->state
+ would not get reset if the transaction was aborted.
*/
+ struct xenbus_transaction xbt;
int current_state;
- int err;
+ int err, abort;
if (state == dev->state)
return 0;
- err = xenbus_scanf(XBT_NIL, dev->nodename, "state", "%d",
- ¤t_state);
- if (err != 1)
+again:
+ abort = 1;
+
+ err = xenbus_transaction_start(&xbt);
+ if (err) {
+ xenbus_switch_fatal(dev, depth, err, "starting transaction");
return 0;
+ }
+
+ err = xenbus_scanf(xbt, dev->nodename, "state", "%d", ¤t_state);
+ if (err != 1)
+ goto abort;
- err = xenbus_printf(XBT_NIL, dev->nodename, "state", "%d", state);
+ err = xenbus_printf(xbt, dev->nodename, "state", "%d", state);
if (err) {
- if (state != XenbusStateClosing) /* Avoid looping */
- xenbus_dev_fatal(dev, err, "writing new state");
- return err;
+ xenbus_switch_fatal(dev, depth, err, "writing new state");
+ goto abort;
}
- dev->state = state;
+ abort = 0;
+abort:
+ err = xenbus_transaction_end(xbt, abort);
+ if (err) {
+ if (err == -EAGAIN && !abort)
+ goto again;
+ xenbus_switch_fatal(dev, depth, err, "ending transaction");
+ } else
+ dev->state = state;
return 0;
}
+
+/**
+ * xenbus_switch_state
+ * @dev: xenbus device
+ * @state: new state
+ *
+ * Advertise in the store a change of the given driver to the given new_state.
+ * Return 0 on success, or -errno on error. On error, the device will switch
+ * to XenbusStateClosing, and the error will be saved in the store.
+ */
+int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state state)
+{
+ return __xenbus_switch_state(dev, state, 0);
+}
+
EXPORT_SYMBOL_GPL(xenbus_switch_state);
int xenbus_frontend_closed(struct xenbus_device *dev)
@@ -283,6 +308,23 @@ void xenbus_dev_fatal(struct xenbus_device *dev, int err, const char *fmt, ...)
}
EXPORT_SYMBOL_GPL(xenbus_dev_fatal);
+/**
+ * Equivalent to xenbus_dev_fatal(dev, err, fmt, args), but helps
+ * avoiding recursion within xenbus_switch_state.
+ */
+static void xenbus_switch_fatal(struct xenbus_device *dev, int depth, int err,
+ const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ xenbus_va_dev_error(dev, err, fmt, ap);
+ va_end(ap);
+
+ if (!depth)
+ __xenbus_switch_state(dev, XenbusStateClosing, 1);
+}
+
/**
* xenbus_grant_ring
* @dev: xenbus device
--
GitLab
From 89de1669ace055b56f1de1c9f5aca26dd7f17f25 Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Fri, 30 Apr 2010 22:01:16 +0000
Subject: [PATCH 334/863] blkfront: Fix backtrace in del_gendisk
The call to del_gendisk follows an non-refcounted gd->queue
pointer. We release the last ref in blk_cleanup_queue. Fixed by
reordering releases accordingly.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 7fa2a1db51e68..3258ae67ac7a1 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1021,14 +1021,14 @@ static void blkfront_closing(struct blkfront_info *info)
/* Flush gnttab callback work. Must be done with no locks held. */
flush_scheduled_work();
- blk_cleanup_queue(info->rq);
- info->rq = NULL;
-
minor = info->gd->first_minor;
nr_minors = info->gd->minors;
del_gendisk(info->gd);
xlbd_release_minors(minor, nr_minors);
+ blk_cleanup_queue(info->rq);
+ info->rq = NULL;
+
out:
if (info->xbdev)
xenbus_frontend_closed(info->xbdev);
--
GitLab
From 9897cb532382f075b337f7933b5a50f0ffc32d35 Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Fri, 30 Apr 2010 22:01:17 +0000
Subject: [PATCH 335/863] blkfront: Fix gendisk leak
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 3258ae67ac7a1..62d32959095d2 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1029,6 +1029,9 @@ static void blkfront_closing(struct blkfront_info *info)
blk_cleanup_queue(info->rq);
info->rq = NULL;
+ put_disk(info->gd);
+ info->gd = NULL;
+
out:
if (info->xbdev)
xenbus_frontend_closed(info->xbdev);
--
GitLab
From a66b5aebb7dc9e695dcb4b528906fd398b63f3d9 Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Sat, 7 Aug 2010 18:33:17 +0200
Subject: [PATCH 336/863] blkfront: Clean up vbd release
* Current blkfront_closing is rather a xlvbd_release_gendisk.
Renamed in preparation of later patches (need the name again).
* Removed the misleading comment -- this only applied to the backend
switch handler, and the queue is already flushed btw.
* Break out the xenbus call, callers know better when to switch
frontend state.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 91 +++++++++++++++++-------------------
1 file changed, 43 insertions(+), 48 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 62d32959095d2..d4cb7fd82b4c6 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -534,6 +534,39 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
return err;
}
+static void xlvbd_release_gendisk(struct blkfront_info *info)
+{
+ unsigned int minor, nr_minors;
+ unsigned long flags;
+
+ if (info->rq == NULL)
+ return;
+
+ spin_lock_irqsave(&blkif_io_lock, flags);
+
+ /* No more blkif_request(). */
+ blk_stop_queue(info->rq);
+
+ /* No more gnttab callback work. */
+ gnttab_cancel_free_callback(&info->callback);
+ spin_unlock_irqrestore(&blkif_io_lock, flags);
+
+ /* Flush gnttab callback work. Must be done with no locks held. */
+ flush_scheduled_work();
+
+ del_gendisk(info->gd);
+
+ minor = info->gd->first_minor;
+ nr_minors = info->gd->minors;
+ xlbd_release_minors(minor, nr_minors);
+
+ blk_cleanup_queue(info->rq);
+ info->rq = NULL;
+
+ put_disk(info->gd);
+ info->gd = NULL;
+}
+
static void kick_pending_request_queues(struct blkfront_info *info)
{
if (!RING_FULL(&info->ring)) {
@@ -994,49 +1027,6 @@ static void blkfront_connect(struct blkfront_info *info)
info->is_ready = 1;
}
-/**
- * Handle the change of state of the backend to Closing. We must delete our
- * device-layer structures now, to ensure that writes are flushed through to
- * the backend. Once is this done, we can switch to Closed in
- * acknowledgement.
- */
-static void blkfront_closing(struct blkfront_info *info)
-{
- unsigned int minor, nr_minors;
- unsigned long flags;
-
-
- if (info->rq == NULL)
- goto out;
-
- spin_lock_irqsave(&blkif_io_lock, flags);
-
- /* No more blkif_request(). */
- blk_stop_queue(info->rq);
-
- /* No more gnttab callback work. */
- gnttab_cancel_free_callback(&info->callback);
- spin_unlock_irqrestore(&blkif_io_lock, flags);
-
- /* Flush gnttab callback work. Must be done with no locks held. */
- flush_scheduled_work();
-
- minor = info->gd->first_minor;
- nr_minors = info->gd->minors;
- del_gendisk(info->gd);
- xlbd_release_minors(minor, nr_minors);
-
- blk_cleanup_queue(info->rq);
- info->rq = NULL;
-
- put_disk(info->gd);
- info->gd = NULL;
-
- out:
- if (info->xbdev)
- xenbus_frontend_closed(info->xbdev);
-}
-
/**
* Callback received when the backend's state changes.
*/
@@ -1073,8 +1063,11 @@ static void blkback_changed(struct xenbus_device *dev,
if (info->users > 0)
xenbus_dev_error(dev, -EBUSY,
"Device in use; refusing to close");
- else
- blkfront_closing(info);
+ else {
+ xlvbd_release_gendisk(info);
+ xenbus_frontend_closed(info->xbdev);
+ }
+
mutex_unlock(&bd->bd_mutex);
bdput(bd);
break;
@@ -1130,11 +1123,13 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
struct xenbus_device *dev = info->xbdev;
if (!dev) {
- blkfront_closing(info);
+ xlvbd_release_gendisk(info);
kfree(info);
} else if (xenbus_read_driver_state(dev->otherend)
- == XenbusStateClosing && info->is_ready)
- blkfront_closing(info);
+ == XenbusStateClosing && info->is_ready) {
+ xlvbd_release_gendisk(info);
+ xenbus_frontend_closed(dev);
+ }
}
unlock_kernel();
return 0;
--
GitLab
From b70f5fa043b318659c936d8c3c696250e6528944 Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Fri, 30 Apr 2010 22:01:19 +0000
Subject: [PATCH 337/863] blkfront: Lock blkfront_info when closing
The bdev .open/.release fops race against backend switches to Closing,
handled by the XenBus thread.
The original code attempted to serialize block device holders and
xenbus only via bd_mutex. This is insufficient, the info->bd pointer
may already be stale (or null) while xenbus tries to bump up the
refcount.
Protect blkfront_info with a dedicated mutex.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 61 +++++++++++++++++++++++-------------
1 file changed, 40 insertions(+), 21 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index d4cb7fd82b4c6..1e406f0331e70 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -79,6 +79,7 @@ static const struct block_device_operations xlvbd_block_fops;
*/
struct blkfront_info
{
+ struct mutex mutex;
struct xenbus_device *xbdev;
struct gendisk *gd;
int vdevice;
@@ -804,7 +805,6 @@ static int talk_to_blkback(struct xenbus_device *dev,
return err;
}
-
/**
* Entry point to this code when a new device is created. Allocate the basic
* structures and the ring buffer for communication with the backend, and
@@ -836,6 +836,7 @@ static int blkfront_probe(struct xenbus_device *dev,
return -ENOMEM;
}
+ mutex_init(&info->mutex);
info->xbdev = dev;
info->vdevice = vdevice;
info->connected = BLKIF_STATE_DISCONNECTED;
@@ -951,6 +952,43 @@ static int blkfront_resume(struct xenbus_device *dev)
return err;
}
+static void
+blkfront_closing(struct blkfront_info *info)
+{
+ struct xenbus_device *xbdev = info->xbdev;
+ struct block_device *bdev = NULL;
+
+ mutex_lock(&info->mutex);
+
+ if (xbdev->state == XenbusStateClosing) {
+ mutex_unlock(&info->mutex);
+ return;
+ }
+
+ if (info->gd)
+ bdev = bdget_disk(info->gd, 0);
+
+ mutex_unlock(&info->mutex);
+
+ if (!bdev) {
+ xenbus_frontend_closed(xbdev);
+ return;
+ }
+
+ mutex_lock(&bdev->bd_mutex);
+
+ if (info->users) {
+ xenbus_dev_error(xbdev, -EBUSY,
+ "Device in use; refusing to close");
+ xenbus_switch_state(xbdev, XenbusStateClosing);
+ } else {
+ xlvbd_release_gendisk(info);
+ xenbus_frontend_closed(xbdev);
+ }
+
+ mutex_unlock(&bdev->bd_mutex);
+ bdput(bdev);
+}
/*
* Invoked when the backend is finally 'ready' (and has told produced
@@ -1034,7 +1072,6 @@ static void blkback_changed(struct xenbus_device *dev,
enum xenbus_state backend_state)
{
struct blkfront_info *info = dev_get_drvdata(&dev->dev);
- struct block_device *bd;
dev_dbg(&dev->dev, "blkfront:blkback_changed to state %d.\n", backend_state);
@@ -1051,25 +1088,7 @@ static void blkback_changed(struct xenbus_device *dev,
break;
case XenbusStateClosing:
- if (info->gd == NULL) {
- xenbus_frontend_closed(dev);
- break;
- }
- bd = bdget_disk(info->gd, 0);
- if (bd == NULL)
- xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
-
- mutex_lock(&bd->bd_mutex);
- if (info->users > 0)
- xenbus_dev_error(dev, -EBUSY,
- "Device in use; refusing to close");
- else {
- xlvbd_release_gendisk(info);
- xenbus_frontend_closed(info->xbdev);
- }
-
- mutex_unlock(&bd->bd_mutex);
- bdput(bd);
+ blkfront_closing(info);
break;
}
}
--
GitLab
From 139617437aff1f0d3b57c2d7cc60e60efc8fe6c3 Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Sat, 7 Aug 2010 18:36:53 +0200
Subject: [PATCH 338/863] blkfront: Fix blkfront backend switch race (bdev
open)
We need not mind if users grab a late handle on a closing disk. We
probably even should not. But we have to make sure it's not a dead
one already
Let the bdev deal with a gendisk deleted under its feet. Takes the
info mutex to decide a race against backend closing.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 31 ++++++++++++++++++++++++-------
1 file changed, 24 insertions(+), 7 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 1e406f0331e70..763a315712cc9 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1118,16 +1118,33 @@ static int blkfront_is_ready(struct xenbus_device *dev)
static int blkif_open(struct block_device *bdev, fmode_t mode)
{
- struct blkfront_info *info = bdev->bd_disk->private_data;
-
- if (!info->xbdev)
- return -ENODEV;
+ struct gendisk *disk = bdev->bd_disk;
+ struct blkfront_info *info;
+ int err = 0;
lock_kernel();
- info->users++;
- unlock_kernel();
- return 0;
+ info = disk->private_data;
+ if (!info) {
+ /* xbdev gone */
+ err = -ERESTARTSYS;
+ goto out;
+ }
+
+ mutex_lock(&info->mutex);
+
+ if (!info->gd)
+ /* xbdev is closed */
+ err = -ERESTARTSYS;
+
+ mutex_unlock(&info->mutex);
+
+ if (!err)
+ ++info->users;
+
+ unlock_kernel();
+out:
+ return err;
}
static int blkif_release(struct gendisk *disk, fmode_t mode)
--
GitLab
From 7fd152f4b6ae4f3cf89e4b7a0383cc3c470772fc Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Sat, 7 Aug 2010 18:45:12 +0200
Subject: [PATCH 339/863] blkfront: Fix blkfront backend switch race (bdev
release)
We cannot read backend state within bdev operations, because it risks
grabbing the state change before xenbus gets to do it.
Fixed by tracking deferral with a frontend switch to Closing. State
exposure isn't strictly necessary, but the backends won't mind.
For a 'clean' deferral this seems actually a more decent protocol than
raising errors.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 49 ++++++++++++++++++++++++------------
1 file changed, 33 insertions(+), 16 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 763a315712cc9..49862993f31e1 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1142,31 +1142,48 @@ static int blkif_open(struct block_device *bdev, fmode_t mode)
if (!err)
++info->users;
- unlock_kernel();
out:
+ unlock_kernel();
return err;
}
static int blkif_release(struct gendisk *disk, fmode_t mode)
{
struct blkfront_info *info = disk->private_data;
+ struct block_device *bdev;
+ struct xenbus_device *xbdev;
+
lock_kernel();
- info->users--;
- if (info->users == 0) {
- /* Check whether we have been instructed to close. We will
- have ignored this request initially, as the device was
- still mounted. */
- struct xenbus_device *dev = info->xbdev;
-
- if (!dev) {
- xlvbd_release_gendisk(info);
- kfree(info);
- } else if (xenbus_read_driver_state(dev->otherend)
- == XenbusStateClosing && info->is_ready) {
- xlvbd_release_gendisk(info);
- xenbus_frontend_closed(dev);
- }
+ if (--info->users)
+ goto out;
+
+ bdev = bdget_disk(disk, 0);
+ bdput(bdev);
+
+ /*
+ * Check if we have been instructed to close. We will have
+ * deferred this request, because the bdev was still open.
+ */
+
+ mutex_lock(&info->mutex);
+ xbdev = info->xbdev;
+
+ if (xbdev && xbdev->state == XenbusStateClosing) {
+ /* pending switch to state closed */
+ xlvbd_release_gendisk(info);
+ xenbus_frontend_closed(info->xbdev);
+ }
+
+ mutex_unlock(&info->mutex);
+
+ if (!xbdev) {
+ /* sudden device removal */
+ xlvbd_release_gendisk(info);
+ disk->private_data = NULL;
+ kfree(info);
}
+
+out:
unlock_kernel();
return 0;
}
--
GitLab
From fa1bd3591a669b92b635dbdb11d1a32a5630821b Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Fri, 30 Apr 2010 22:01:22 +0000
Subject: [PATCH 340/863] blkfront: Lock blockfront_info during xbdev removal
Same approach as blkfront_closing:
* Grab the bdev safely, holding the info mutex.
* Zap xbdev safely, holding the info mutex.
* Try bdev removal safely, holding bd_mutex.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 41 ++++++++++++++++++++++++++++++------
1 file changed, 35 insertions(+), 6 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 49862993f31e1..715de7d8ce010 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1093,18 +1093,47 @@ static void blkback_changed(struct xenbus_device *dev,
}
}
-static int blkfront_remove(struct xenbus_device *dev)
+static int blkfront_remove(struct xenbus_device *xbdev)
{
- struct blkfront_info *info = dev_get_drvdata(&dev->dev);
+ struct blkfront_info *info = dev_get_drvdata(&xbdev->dev);
+ struct block_device *bdev = NULL;
+ struct gendisk *disk;
- dev_dbg(&dev->dev, "blkfront_remove: %s removed\n", dev->nodename);
+ dev_dbg(&xbdev->dev, "%s removed", xbdev->nodename);
blkif_free(info, 0);
- if(info->users == 0)
+ mutex_lock(&info->mutex);
+
+ disk = info->gd;
+ if (disk)
+ bdev = bdget_disk(disk, 0);
+
+ info->xbdev = NULL;
+ mutex_unlock(&info->mutex);
+
+ if (!bdev) {
+ kfree(info);
+ return 0;
+ }
+
+ /*
+ * The xbdev was removed before we reached the Closed
+ * state. See if it's safe to remove the disk. If the bdev
+ * isn't closed yet, we let release take care of it.
+ */
+
+ mutex_lock(&bdev->bd_mutex);
+ info = disk->private_data;
+
+ if (info && !info->users) {
+ xlvbd_release_gendisk(info);
+ disk->private_data = NULL;
kfree(info);
- else
- info->xbdev = NULL;
+ }
+
+ mutex_unlock(&bdev->bd_mutex);
+ bdput(bdev);
return 0;
}
--
GitLab
From acfca3c622a009fb62b566604452ab9fb3a11019 Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Sat, 7 Aug 2010 18:47:26 +0200
Subject: [PATCH 341/863] blkfront: Remove obsolete info->users
This is just bd_openers, protected by the bd_mutex.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 715de7d8ce010..9c5a25a462e61 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1168,9 +1168,6 @@ static int blkif_open(struct block_device *bdev, fmode_t mode)
mutex_unlock(&info->mutex);
- if (!err)
- ++info->users;
-
out:
unlock_kernel();
return err;
@@ -1183,12 +1180,13 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
struct xenbus_device *xbdev;
lock_kernel();
- if (--info->users)
- goto out;
bdev = bdget_disk(disk, 0);
bdput(bdev);
+ if (bdev->bd_openers)
+ goto out;
+
/*
* Check if we have been instructed to close. We will have
* deferred this request, because the bdev was still open.
@@ -1212,7 +1210,6 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
kfree(info);
}
-out:
unlock_kernel();
return 0;
}
--
GitLab
From 7b32d1044ae791a1e53a53023bf2668438d5301b Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Fri, 30 Apr 2010 22:01:23 +0000
Subject: [PATCH 342/863] blkfront: Remove obsolete info->users
This is just bd_openers, protected by the bd_mutex.
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 9c5a25a462e61..b01167b6207a0 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -96,12 +96,6 @@ struct blkfront_info
unsigned long shadow_free;
int feature_barrier;
int is_ready;
-
- /**
- * The number of people holding this device open. We won't allow a
- * hot-unplug unless this is 0.
- */
- int users;
};
static DEFINE_SPINLOCK(blkif_io_lock);
@@ -977,7 +971,7 @@ blkfront_closing(struct blkfront_info *info)
mutex_lock(&bdev->bd_mutex);
- if (info->users) {
+ if (bdev->bd_openers) {
xenbus_dev_error(xbdev, -EBUSY,
"Device in use; refusing to close");
xenbus_switch_state(xbdev, XenbusStateClosing);
@@ -1126,7 +1120,7 @@ static int blkfront_remove(struct xenbus_device *xbdev)
mutex_lock(&bdev->bd_mutex);
info = disk->private_data;
- if (info && !info->users) {
+ if (info && !bdev->bd_openers) {
xlvbd_release_gendisk(info);
disk->private_data = NULL;
kfree(info);
--
GitLab
From d54142c71f05b608b7360d80bdab74eed0f17a98 Mon Sep 17 00:00:00 2001
From: Daniel Stodden <daniel.stodden@citrix.com>
Date: Sat, 7 Aug 2010 18:51:21 +0200
Subject: [PATCH 343/863] blkfront: Klog the unclean release path
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b01167b6207a0..c6727b5cefd6f 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1120,6 +1120,10 @@ static int blkfront_remove(struct xenbus_device *xbdev)
mutex_lock(&bdev->bd_mutex);
info = disk->private_data;
+ dev_warn(disk_to_dev(disk),
+ "%s was hot-unplugged, %d stale handles\n",
+ xbdev->nodename, bdev->bd_openers);
+
if (info && !bdev->bd_openers) {
xlvbd_release_gendisk(info);
disk->private_data = NULL;
@@ -1191,6 +1195,7 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
if (xbdev && xbdev->state == XenbusStateClosing) {
/* pending switch to state closed */
+ dev_info(disk_to_dev(bdev->bd_disk), "releasing disk\n");
xlvbd_release_gendisk(info);
xenbus_frontend_closed(info->xbdev);
}
@@ -1199,6 +1204,7 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
if (!xbdev) {
/* sudden device removal */
+ dev_info(disk_to_dev(bdev->bd_disk), "releasing disk\n");
xlvbd_release_gendisk(info);
disk->private_data = NULL;
kfree(info);
--
GitLab
From 373b45f7b691bf7faafeed46b0b3dcd5b281cd5f Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:44:45 -0500
Subject: [PATCH 344/863] cciss: Set the performant mode bit in the scsi half
of the driver
cciss: Set the performant mode bit in the scsi half of the driver
In a couple of places, the performant mode bit wasn't being set in
the scsi half of the driver, causing commands to seem to hang. Use
enqueue_cmd_and_start_io() where appropriate. This fixes a bug that
echo engage scsi > /proc/driver/cciss/cciss0
would hang.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss_scsi.c | 20 ++------------------
1 file changed, 2 insertions(+), 18 deletions(-)
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 8e0a709286df6..3604b72f2af90 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -921,7 +921,6 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *c,
unsigned char *buf, int bufsize,
int direction)
{
- unsigned long flags;
DECLARE_COMPLETION_ONSTACK(wait);
cp->cmd_type = CMD_IOCTL_PEND; // treat this like an ioctl
@@ -948,14 +947,7 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *c,
bufsize, DMA_FROM_DEVICE);
cp->waiting = &wait;
-
- /* Put the request on the tail of the request queue */
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- addQ(&c->reqQ, cp);
- c->Qdepth++;
- start_io(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
-
+ enqueue_cmd_and_start_io(c, cp);
wait_for_completion(&wait);
/* undo the dma mapping */
@@ -1525,15 +1517,7 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
break;
}
cciss_scatter_gather(c, cp, cmd);
-
- /* Put the request on the tail of the request queue */
-
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&c->reqQ, cp);
- c->Qdepth++;
- start_io(c);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-
+ enqueue_cmd_and_start_io(c, cp);
/* the cmd'll come back via intr handler in complete_scsi_command() */
return 0;
}
--
GitLab
From 292e50dd393a8359798f1f20ac4d48ec835ffa04 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:44:50 -0500
Subject: [PATCH 345/863] cciss: save pdev pointer in per hba structure early
to avoid passing it around so much.
cciss: save pdev pointer in per hba structure early to avoid passing it around so much.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 61 ++++++++++++++++++++++---------------------
1 file changed, 31 insertions(+), 30 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 665a470310a96..b79ce8e960f81 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -199,8 +199,7 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
sector_t total_size,
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
-static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
- __u32);
+static void __devinit cciss_interrupt_mode(ctlr_info_t *, __u32);
static void start_io(ctlr_info_t *h);
static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
__u8 page_code, unsigned char scsi3addr[],
@@ -3933,8 +3932,7 @@ cciss_put_controller_into_performant_mode(ctlr_info_t *h)
* controllers that are capable. If not, we use IO-APIC mode.
*/
-static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
- struct pci_dev *pdev, __u32 board_id)
+static void __devinit cciss_interrupt_mode(ctlr_info_t *c, __u32 board_id)
{
#ifdef CONFIG_PCI_MSI
int err;
@@ -3948,8 +3946,8 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
(board_id == 0x40820E11) || (board_id == 0x40830E11))
goto default_int_mode;
- if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
- err = pci_enable_msix(pdev, cciss_msix_entries, 4);
+ if (pci_find_capability(c->pdev, PCI_CAP_ID_MSIX)) {
+ err = pci_enable_msix(c->pdev, cciss_msix_entries, 4);
if (!err) {
c->intr[0] = cciss_msix_entries[0].vector;
c->intr[1] = cciss_msix_entries[1].vector;
@@ -3968,8 +3966,8 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
goto default_int_mode;
}
}
- if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
- if (!pci_enable_msi(pdev)) {
+ if (pci_find_capability(c->pdev, PCI_CAP_ID_MSI)) {
+ if (!pci_enable_msi(c->pdev)) {
c->msi_vector = 1;
} else {
printk(KERN_WARNING "cciss: MSI init failed\n");
@@ -3978,11 +3976,11 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
- c->intr[PERF_MODE_INT] = pdev->irq;
+ c->intr[PERF_MODE_INT] = c->pdev->irq;
return;
}
-static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
+static int __devinit cciss_pci_init(ctlr_info_t *c)
{
ushort subsystem_vendor_id, subsystem_device_id, command;
__u32 board_id, scratchpad = 0;
@@ -3992,8 +3990,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
int i, prod_index, err;
__u32 trans_offset;
- subsystem_vendor_id = pdev->subsystem_vendor;
- subsystem_device_id = pdev->subsystem_device;
+ subsystem_vendor_id = c->pdev->subsystem_vendor;
+ subsystem_device_id = c->pdev->subsystem_device;
board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
subsystem_vendor_id);
@@ -4006,7 +4004,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
}
prod_index = i;
if (prod_index == ARRAY_SIZE(products)) {
- dev_warn(&pdev->dev,
+ dev_warn(&c->pdev->dev,
"unrecognized board ID: 0x%08lx, ignoring.\n",
(unsigned long) board_id);
return -ENODEV;
@@ -4014,20 +4012,20 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
/* check to see if controller has been disabled */
/* BEFORE trying to enable it */
- (void)pci_read_config_word(pdev, PCI_COMMAND, &command);
+ (void)pci_read_config_word(c->pdev, PCI_COMMAND, &command);
if (!(command & 0x02)) {
printk(KERN_WARNING
"cciss: controller appears to be disabled\n");
return -ENODEV;
}
- err = pci_enable_device(pdev);
+ err = pci_enable_device(c->pdev);
if (err) {
printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
return err;
}
- err = pci_request_regions(pdev, "cciss");
+ err = pci_request_regions(c->pdev, "cciss");
if (err) {
printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
"aborting\n");
@@ -4035,19 +4033,19 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
}
#ifdef CCISS_DEBUG
- printk("command = %x\n", command);
- printk("irq = %x\n", pdev->irq);
- printk("board_id = %x\n", board_id);
+ printk(KERN_INFO "command = %x\n", command);
+ printk(KERN_INFO "irq = %x\n", c->pdev->irq);
+ printk(KERN_INFO "board_id = %x\n", board_id);
#endif /* CCISS_DEBUG */
/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
* else we use the IO-APIC interrupt assigned to us by system ROM.
*/
- cciss_interrupt_mode(c, pdev, board_id);
+ cciss_interrupt_mode(c, board_id);
/* find the memory BAR */
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- if (pci_resource_flags(pdev, i) & IORESOURCE_MEM)
+ if (pci_resource_flags(c->pdev, i) & IORESOURCE_MEM)
break;
}
if (i == DEVICE_COUNT_RESOURCE) {
@@ -4056,7 +4054,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
goto err_out_free_res;
}
- c->paddr = pci_resource_start(pdev, i); /* addressing mode bits
+ c->paddr = pci_resource_start(c->pdev, i); /* addressing mode bits
* already removed
*/
@@ -4086,7 +4084,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
#ifdef CCISS_DEBUG
printk("cfg base address = %x\n", cfg_base_addr);
#endif /* CCISS_DEBUG */
- cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
+ cfg_base_addr_index = find_PCI_BAR_index(c->pdev, cfg_base_addr);
#ifdef CCISS_DEBUG
printk("cfg base address index = %llx\n",
(unsigned long long)cfg_base_addr_index);
@@ -4101,12 +4099,12 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
#ifdef CCISS_DEBUG
printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
#endif /* CCISS_DEBUG */
- c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
+ c->cfgtable = remap_pci_mem(pci_resource_start(c->pdev,
cfg_base_addr_index) +
cfg_offset, sizeof(CfgTable_struct));
/* Find performant mode table. */
trans_offset = readl(&(c->cfgtable->TransMethodOffset));
- c->transtable = remap_pci_mem(pci_resource_start(pdev,
+ c->transtable = remap_pci_mem(pci_resource_start(c->pdev,
cfg_base_addr_index) + cfg_offset+trans_offset,
sizeof(*c->transtable));
c->board_id = board_id;
@@ -4173,9 +4171,11 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
dma_prefetch |= 0x8000;
writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
- pci_read_config_dword(pdev, PCI_COMMAND_PARITY, &dma_refetch);
+ pci_read_config_dword(c->pdev, PCI_COMMAND_PARITY,
+ &dma_refetch);
dma_refetch |= 0x1;
- pci_write_config_dword(pdev, PCI_COMMAND_PARITY, dma_refetch);
+ pci_write_config_dword(c->pdev, PCI_COMMAND_PARITY,
+ dma_refetch);
}
#ifdef CCISS_DEBUG
@@ -4189,7 +4189,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
- pci_release_regions(pdev);
+ pci_release_regions(c->pdev);
return err;
}
@@ -4466,17 +4466,18 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
i = alloc_cciss_hba();
if (i < 0)
return -1;
+
+ hba[i]->pdev = pdev;
hba[i]->busy_initializing = 1;
INIT_HLIST_HEAD(&hba[i]->cmpQ);
INIT_HLIST_HEAD(&hba[i]->reqQ);
mutex_init(&hba[i]->busy_shutting_down);
- if (cciss_pci_init(hba[i], pdev) != 0)
+ if (cciss_pci_init(hba[i]) != 0)
goto clean_no_release_regions;
sprintf(hba[i]->devname, "cciss%d", i);
hba[i]->ctlr = i;
- hba[i]->pdev = pdev;
init_completion(&hba[i]->scan_wait);
--
GitLab
From 6539fa9b2e2e7fc3b3fe819e54aa7be83f0370fa Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:44:55 -0500
Subject: [PATCH 346/863] cciss: factor out cciss_lookup_board_id
cciss: factor out cciss_lookup_board_id
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 66 +++++++++++++++++++++++--------------------
1 file changed, 35 insertions(+), 31 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b79ce8e960f81..d4167c29213d3 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3980,35 +3980,43 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c, __u32 board_id)
return;
}
-static int __devinit cciss_pci_init(ctlr_info_t *c)
+static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
{
- ushort subsystem_vendor_id, subsystem_device_id, command;
- __u32 board_id, scratchpad = 0;
- __u64 cfg_offset;
- __u32 cfg_base_addr;
- __u64 cfg_base_addr_index;
- int i, prod_index, err;
- __u32 trans_offset;
+ int i;
+ u32 subsystem_vendor_id, subsystem_device_id;
- subsystem_vendor_id = c->pdev->subsystem_vendor;
- subsystem_device_id = c->pdev->subsystem_device;
- board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
- subsystem_vendor_id);
+ subsystem_vendor_id = pdev->subsystem_vendor;
+ subsystem_device_id = pdev->subsystem_device;
+ *board_id = ((subsystem_device_id << 16) & 0xffff0000) |
+ subsystem_vendor_id;
for (i = 0; i < ARRAY_SIZE(products); i++) {
/* Stand aside for hpsa driver on request */
if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
return -ENODEV;
- if (board_id == products[i].board_id)
- break;
+ if (*board_id == products[i].board_id)
+ return i;
}
- prod_index = i;
- if (prod_index == ARRAY_SIZE(products)) {
- dev_warn(&c->pdev->dev,
- "unrecognized board ID: 0x%08lx, ignoring.\n",
- (unsigned long) board_id);
+ dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
+ *board_id);
+ return -ENODEV;
+}
+
+static int __devinit cciss_pci_init(ctlr_info_t *c)
+{
+ ushort command;
+ __u32 scratchpad = 0;
+ __u64 cfg_offset;
+ __u32 cfg_base_addr;
+ __u64 cfg_base_addr_index;
+ __u32 trans_offset;
+ int i, prod_index, err;
+
+ prod_index = cciss_lookup_board_id(c->pdev, &c->board_id);
+ if (prod_index < 0)
return -ENODEV;
- }
+ c->product_name = products[prod_index].product_name;
+ c->access = *(products[prod_index].access);
/* check to see if controller has been disabled */
/* BEFORE trying to enable it */
@@ -4035,13 +4043,13 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
#ifdef CCISS_DEBUG
printk(KERN_INFO "command = %x\n", command);
printk(KERN_INFO "irq = %x\n", c->pdev->irq);
- printk(KERN_INFO "board_id = %x\n", board_id);
+ printk(KERN_INFO "board_id = %x\n", c->board_id);
#endif /* CCISS_DEBUG */
/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
* else we use the IO-APIC interrupt assigned to us by system ROM.
*/
- cciss_interrupt_mode(c, board_id);
+ cciss_interrupt_mode(c, c->board_id);
/* find the memory BAR */
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
@@ -4107,11 +4115,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
c->transtable = remap_pci_mem(pci_resource_start(c->pdev,
cfg_base_addr_index) + cfg_offset+trans_offset,
sizeof(*c->transtable));
- c->board_id = board_id;
-
- #ifdef CCISS_DEBUG
- print_cfg_table(c->cfgtable);
- #endif /* CCISS_DEBUG */
+#ifdef CCISS_DEBUG
+ print_cfg_table(c->cfgtable);
+#endif /* CCISS_DEBUG */
/* Some controllers support Zero Memory Raid (ZMR).
* When configured in ZMR mode the number of supported
@@ -4139,8 +4145,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
c->chainsize = 0; /* traditional */
}
- c->product_name = products[prod_index].product_name;
- c->access = *(products[prod_index].access);
c->nr_cmds = c->max_commands - 4;
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
@@ -4165,8 +4169,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
* We've disabled prefetch for some time now. Testing with XEN
* kernels revealed a bug in the refetch if dom0 resides on a P600.
*/
- if(board_id == 0x3225103C) {
- __u32 dma_prefetch;
+ if (c->board_id == 0x3225103C) {
+ __u32 dma_prefetch;
__u32 dma_refetch;
dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
dma_prefetch |= 0x8000;
--
GitLab
From dd9c426e92d0cbd710c8df5b84afe9a2eeda3918 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:00 -0500
Subject: [PATCH 347/863] cciss: factor out cciss_board_disabled
cciss: factor out cciss_board_disabled
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index d4167c29213d3..808d2a5b46bb2 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4002,9 +4002,16 @@ static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
return -ENODEV;
}
+static inline bool cciss_board_disabled(ctlr_info_t *h)
+{
+ u16 command;
+
+ (void) pci_read_config_word(h->pdev, PCI_COMMAND, &command);
+ return ((command & PCI_COMMAND_MEMORY) == 0);
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
- ushort command;
__u32 scratchpad = 0;
__u64 cfg_offset;
__u32 cfg_base_addr;
@@ -4018,15 +4025,11 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
c->product_name = products[prod_index].product_name;
c->access = *(products[prod_index].access);
- /* check to see if controller has been disabled */
- /* BEFORE trying to enable it */
- (void)pci_read_config_word(c->pdev, PCI_COMMAND, &command);
- if (!(command & 0x02)) {
+ if (cciss_board_disabled(c)) {
printk(KERN_WARNING
"cciss: controller appears to be disabled\n");
return -ENODEV;
}
-
err = pci_enable_device(c->pdev);
if (err) {
printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
--
GitLab
From dac5488a9ed6b6e59749e161209a6678980803f1 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:05 -0500
Subject: [PATCH 348/863] cciss: remove board_id parameter from
cciss_interrupt_mode()
cciss: remove board_id parameter from cciss_interrupt_mode()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 808d2a5b46bb2..bb22a80d448f1 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -199,7 +199,7 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
sector_t total_size,
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
-static void __devinit cciss_interrupt_mode(ctlr_info_t *, __u32);
+static void __devinit cciss_interrupt_mode(ctlr_info_t *);
static void start_io(ctlr_info_t *h);
static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
__u8 page_code, unsigned char scsi3addr[],
@@ -3932,7 +3932,7 @@ cciss_put_controller_into_performant_mode(ctlr_info_t *h)
* controllers that are capable. If not, we use IO-APIC mode.
*/
-static void __devinit cciss_interrupt_mode(ctlr_info_t *c, __u32 board_id)
+static void __devinit cciss_interrupt_mode(ctlr_info_t *c)
{
#ifdef CONFIG_PCI_MSI
int err;
@@ -3941,9 +3941,8 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c, __u32 board_id)
};
/* Some boards advertise MSI but don't really support it */
- if ((board_id == 0x40700E11) ||
- (board_id == 0x40800E11) ||
- (board_id == 0x40820E11) || (board_id == 0x40830E11))
+ if ((c->board_id == 0x40700E11) || (c->board_id == 0x40800E11) ||
+ (c->board_id == 0x40820E11) || (c->board_id == 0x40830E11))
goto default_int_mode;
if (pci_find_capability(c->pdev, PCI_CAP_ID_MSIX)) {
@@ -4052,7 +4051,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
* else we use the IO-APIC interrupt assigned to us by system ROM.
*/
- cciss_interrupt_mode(c, c->board_id);
+ cciss_interrupt_mode(c);
/* find the memory BAR */
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
--
GitLab
From d474830da6218c0b7f81eab03aff7d8c539bdb57 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:10 -0500
Subject: [PATCH 349/863] cciss: factor out cciss_find_memory_BAR()
cciss: factor out cciss_find_memory_BAR()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 37 +++++++++++++++++++------------------
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index bb22a80d448f1..9c9c79c0aa98e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4009,6 +4009,23 @@ static inline bool cciss_board_disabled(ctlr_info_t *h)
return ((command & PCI_COMMAND_MEMORY) == 0);
}
+static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
+ unsigned long *memory_bar)
+{
+ int i;
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
+ if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
+ /* addressing mode bits already removed */
+ *memory_bar = pci_resource_start(pdev, i);
+ dev_dbg(&pdev->dev, "memory BAR = %lx\n",
+ *memory_bar);
+ return 0;
+ }
+ dev_warn(&pdev->dev, "no memory BAR found\n");
+ return -ENODEV;
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
__u32 scratchpad = 0;
@@ -4052,25 +4069,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
* else we use the IO-APIC interrupt assigned to us by system ROM.
*/
cciss_interrupt_mode(c);
-
- /* find the memory BAR */
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- if (pci_resource_flags(c->pdev, i) & IORESOURCE_MEM)
- break;
- }
- if (i == DEVICE_COUNT_RESOURCE) {
- printk(KERN_WARNING "cciss: No memory BAR found\n");
- err = -ENODEV;
+ err = cciss_pci_find_memory_BAR(c->pdev, &c->paddr);
+ if (err)
goto err_out_free_res;
- }
-
- c->paddr = pci_resource_start(c->pdev, i); /* addressing mode bits
- * already removed
- */
-
-#ifdef CCISS_DEBUG
- printk("address 0 = %lx\n", c->paddr);
-#endif /* CCISS_DEBUG */
c->vaddr = remap_pci_mem(c->paddr, 0x250);
/* Wait for the board to become ready. (PCI hotplug needs this.)
--
GitLab
From e99ba1362723df14bbe36da6eeaadf81d95782e6 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:15 -0500
Subject: [PATCH 350/863] cciss: factor out cciss_wait_for_board_ready()
cciss: factor out cciss_wait_for_board_ready()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 32 +++++++++++++++++---------------
drivers/block/cciss.h | 15 +++++++++++++++
2 files changed, 32 insertions(+), 15 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9c9c79c0aa98e..286c81d70818a 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4026,9 +4026,23 @@ static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
return -ENODEV;
}
+static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
+{
+ int i;
+ u32 scratchpad;
+
+ for (i = 0; i < CCISS_BOARD_READY_ITERATIONS; i++) {
+ scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+ if (scratchpad == CCISS_FIRMWARE_READY)
+ return 0;
+ msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
+ }
+ dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
+ return -ENODEV;
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
- __u32 scratchpad = 0;
__u64 cfg_offset;
__u32 cfg_base_addr;
__u64 cfg_base_addr_index;
@@ -4073,21 +4087,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
if (err)
goto err_out_free_res;
c->vaddr = remap_pci_mem(c->paddr, 0x250);
-
- /* Wait for the board to become ready. (PCI hotplug needs this.)
- * We poll for up to 120 secs, once per 100ms. */
- for (i = 0; i < 1200; i++) {
- scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET);
- if (scratchpad == CCISS_FIRMWARE_READY)
- break;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */
- }
- if (scratchpad != CCISS_FIRMWARE_READY) {
- printk(KERN_WARNING "cciss: Board not ready. Timed out.\n");
- err = -ENODEV;
+ err = cciss_wait_for_board_ready(c);
+ if (err)
goto err_out_free_res;
- }
/* get the address index number */
cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET);
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 8a9f5b58daa88..c2ef9dd56c459 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -190,6 +190,21 @@ struct ctlr_info
#define CCISS_INTR_ON 1
#define CCISS_INTR_OFF 0
+
+
+/* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board
+ * to become ready, in seconds, before giving up on it.
+ * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
+ * between polling the board to see if it is ready, in
+ * milliseconds. CCISS_BOARD_READY_ITERATIONS is derived
+ * the above.
+ */
+#define CCISS_BOARD_READY_WAIT_SECS (120)
+#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
+#define CCISS_BOARD_READY_ITERATIONS \
+ ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
+ CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+
/*
Send the command to the hardware
*/
--
GitLab
From 4809d0988f10e305511d1a3e223880fa4b21f90e Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:21 -0500
Subject: [PATCH 351/863] cciss: factor out cciss_find_cfgtables
cciss: factor out cciss_find_cfgtables
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 68 +++++++++++++++++++++----------------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 286c81d70818a..c297d31d0c974 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4041,13 +4041,40 @@ static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
return -ENODEV;
}
+static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
+{
+ u64 cfg_offset;
+ u32 cfg_base_addr;
+ u64 cfg_base_addr_index;
+ u32 trans_offset;
+
+ /* get the address index number */
+ cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET);
+ cfg_base_addr &= (u32) 0x0000ffff;
+ cfg_base_addr_index = find_PCI_BAR_index(h->pdev, cfg_base_addr);
+ if (cfg_base_addr_index == -1) {
+ dev_warn(&h->pdev->dev, "cannot find cfg_base_addr_index\n");
+ return -ENODEV;
+ }
+ cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET);
+ h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
+ cfg_base_addr_index) + cfg_offset,
+ sizeof(h->cfgtable));
+ if (!h->cfgtable)
+ return -ENOMEM;
+ /* Find performant mode table. */
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
+ cfg_base_addr_index)+cfg_offset+trans_offset,
+ sizeof(*h->transtable));
+ if (!h->transtable)
+ return -ENOMEM;
+ return 0;
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
- __u64 cfg_offset;
- __u32 cfg_base_addr;
- __u64 cfg_base_addr_index;
- __u32 trans_offset;
- int i, prod_index, err;
+ int prod_index, err;
prod_index = cciss_lookup_board_id(c->pdev, &c->board_id);
if (prod_index < 0)
@@ -4090,36 +4117,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
err = cciss_wait_for_board_ready(c);
if (err)
goto err_out_free_res;
-
- /* get the address index number */
- cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET);
- cfg_base_addr &= (__u32) 0x0000ffff;
-#ifdef CCISS_DEBUG
- printk("cfg base address = %x\n", cfg_base_addr);
-#endif /* CCISS_DEBUG */
- cfg_base_addr_index = find_PCI_BAR_index(c->pdev, cfg_base_addr);
-#ifdef CCISS_DEBUG
- printk("cfg base address index = %llx\n",
- (unsigned long long)cfg_base_addr_index);
-#endif /* CCISS_DEBUG */
- if (cfg_base_addr_index == -1) {
- printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
- err = -ENODEV;
+ err = cciss_find_cfgtables(c);
+ if (err)
goto err_out_free_res;
- }
-
- cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
-#ifdef CCISS_DEBUG
- printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
-#endif /* CCISS_DEBUG */
- c->cfgtable = remap_pci_mem(pci_resource_start(c->pdev,
- cfg_base_addr_index) +
- cfg_offset, sizeof(CfgTable_struct));
- /* Find performant mode table. */
- trans_offset = readl(&(c->cfgtable->TransMethodOffset));
- c->transtable = remap_pci_mem(pci_resource_start(c->pdev,
- cfg_base_addr_index) + cfg_offset+trans_offset,
- sizeof(*c->transtable));
#ifdef CCISS_DEBUG
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
--
GitLab
From da5503217d7421dbf04a0557d16cae6d5fc0960e Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:26 -0500
Subject: [PATCH 352/863] cciss: fix leak of ioremapped memory
cciss: fix leak of ioremapped memory
in cciss_pci_init error path.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index c297d31d0c974..b702471106086 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4114,6 +4114,10 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
if (err)
goto err_out_free_res;
c->vaddr = remap_pci_mem(c->paddr, 0x250);
+ if (!c->vaddr) {
+ err = -ENOMEM;
+ goto err_out_free_res;
+ }
err = cciss_wait_for_board_ready(c);
if (err)
goto err_out_free_res;
@@ -4198,6 +4202,12 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
+ if (c->transtable)
+ iounmap(c->transtable);
+ if (c->cfgtable)
+ iounmap(c->cfgtable);
+ if (c->vaddr)
+ iounmap(c->vaddr);
pci_release_regions(c->pdev);
return err;
}
@@ -4745,6 +4755,8 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
pci_disable_msi(hba[i]->pdev);
#endif /* CONFIG_PCI_MSI */
+ iounmap(hba[i]->transtable);
+ iounmap(hba[i]->cfgtable);
iounmap(hba[i]->vaddr);
pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
--
GitLab
From afadbf4b9591f3318508792ad98c347336a1a95d Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:31 -0500
Subject: [PATCH 353/863] cciss: factor out cciss_find_board_params
cciss: factor out cciss_find_board_params
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 52 +++++++++++++++++++++----------------------
1 file changed, 25 insertions(+), 27 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b702471106086..97feb50675cf9 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4072,6 +4072,30 @@ static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
return 0;
}
+/* Interrogate the hardware for some limits:
+ * max commands, max SG elements without chaining, and with chaining,
+ * SG chain block size, etc.
+ */
+static void __devinit cciss_find_board_params(ctlr_info_t *h)
+{
+ h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+ h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
+ h->maxsgentries = readl(&(h->cfgtable->MaxSGElements));
+ /*
+ * Limit in-command s/g elements to 32 save dma'able memory.
+ * Howvever spec says if 0, use 31
+ */
+ h->max_cmd_sgentries = 31;
+ if (h->maxsgentries > 512) {
+ h->max_cmd_sgentries = 32;
+ h->chainsize = h->maxsgentries - h->max_cmd_sgentries + 1;
+ h->maxsgentries--; /* save one for chain pointer */
+ } else {
+ h->maxsgentries = 31; /* default to traditional values */
+ h->chainsize = 0;
+ }
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
int prod_index, err;
@@ -4127,34 +4151,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
#ifdef CCISS_DEBUG
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ cciss_find_board_params(c);
- /* Some controllers support Zero Memory Raid (ZMR).
- * When configured in ZMR mode the number of supported
- * commands drops to 64. So instead of just setting an
- * arbitrary value we make the driver a little smarter.
- * We read the config table to tell us how many commands
- * are supported on the controller then subtract 4 to
- * leave a little room for ioctl calls.
- */
- c->max_commands = readl(&(c->cfgtable->MaxPerformantModeCommands));
- c->maxsgentries = readl(&(c->cfgtable->MaxSGElements));
-
- /*
- * Limit native command to 32 s/g elements to save dma'able memory.
- * Howvever spec says if 0, use 31
- */
-
- c->max_cmd_sgentries = 31;
- if (c->maxsgentries > 512) {
- c->max_cmd_sgentries = 32;
- c->chainsize = c->maxsgentries - c->max_cmd_sgentries + 1;
- c->maxsgentries -= 1; /* account for chain pointer */
- } else {
- c->maxsgentries = 31; /* Default to traditional value */
- c->chainsize = 0; /* traditional */
- }
-
- c->nr_cmds = c->max_commands - 4;
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
(readb(&c->cfgtable->Signature[2]) != 'S') ||
--
GitLab
From 501b92cd6b394ba56bb978fd55606b5639b4d3fb Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:36 -0500
Subject: [PATCH 354/863] cciss: factor out CISS_signature_present()
cciss: factor out CISS_signature_present()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 97feb50675cf9..9a4869572a0b9 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4096,6 +4096,18 @@ static void __devinit cciss_find_board_params(ctlr_info_t *h)
}
}
+static inline bool CISS_signature_present(ctlr_info_t *h)
+{
+ if ((readb(&h->cfgtable->Signature[0]) != 'C') ||
+ (readb(&h->cfgtable->Signature[1]) != 'I') ||
+ (readb(&h->cfgtable->Signature[2]) != 'S') ||
+ (readb(&h->cfgtable->Signature[3]) != 'S')) {
+ dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
+ return false;
+ }
+ return true;
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
int prod_index, err;
@@ -4153,11 +4165,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
#endif /* CCISS_DEBUG */
cciss_find_board_params(c);
- if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
- (readb(&c->cfgtable->Signature[1]) != 'I') ||
- (readb(&c->cfgtable->Signature[2]) != 'S') ||
- (readb(&c->cfgtable->Signature[3]) != 'S')) {
- printk("Does not appear to be a valid CISS config table\n");
+ if (!CISS_signature_present(c)) {
err = -ENODEV;
goto err_out_free_res;
}
--
GitLab
From 322e304c4d71b79b3950ca560db4868cc3e04ee6 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:41 -0500
Subject: [PATCH 355/863] cciss: factor out cciss_enable_scsi_prefetch()
cciss: factor out cciss_enable_scsi_prefetch()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9a4869572a0b9..b4264bcda618c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4108,6 +4108,18 @@ static inline bool CISS_signature_present(ctlr_info_t *h)
return true;
}
+/* Need to enable prefetch in the SCSI core for 6400 in x86 */
+static inline void cciss_enable_scsi_prefetch(ctlr_info_t *h)
+{
+#ifdef CONFIG_X86
+ u32 prefetch;
+
+ prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
+ prefetch |= 0x100;
+ writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
+#endif
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
int prod_index, err;
@@ -4169,16 +4181,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
err = -ENODEV;
goto err_out_free_res;
}
-#ifdef CONFIG_X86
- {
- /* Need to enable prefetch in the SCSI core for 6400 in x86 */
- __u32 prefetch;
- prefetch = readl(&(c->cfgtable->SCSI_Prefetch));
- prefetch |= 0x100;
- writel(prefetch, &(c->cfgtable->SCSI_Prefetch));
- }
-#endif
-
+ cciss_enable_scsi_prefetch(c);
/* Disabling DMA prefetch and refetch for the P600.
* An ASIC bug may result in accesses to invalid memory addresses.
* We've disabled prefetch for some time now. Testing with XEN
--
GitLab
From bfd63ee571ed2a1ab7af99544e326483f84c0544 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:46 -0500
Subject: [PATCH 356/863] cciss: factor out cciss_p600_dma_prefetch_quirk()
cciss: factor out cciss_p600_dma_prefetch_quirk()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 37 +++++++++++++++++++------------------
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b4264bcda618c..e1c2bf1c6d644 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4120,6 +4120,24 @@ static inline void cciss_enable_scsi_prefetch(ctlr_info_t *h)
#endif
}
+/* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result
+ * in a prefetch beyond physical memory.
+ */
+static inline void cciss_p600_dma_prefetch_quirk(ctlr_info_t *h)
+{
+ u32 dma_prefetch;
+ __u32 dma_refetch;
+
+ if (h->board_id != 0x3225103C)
+ return;
+ dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
+ dma_prefetch |= 0x8000;
+ writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
+ pci_read_config_dword(h->pdev, PCI_COMMAND_PARITY, &dma_refetch);
+ dma_refetch |= 0x1;
+ pci_write_config_dword(h->pdev, PCI_COMMAND_PARITY, dma_refetch);
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
int prod_index, err;
@@ -4182,24 +4200,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
goto err_out_free_res;
}
cciss_enable_scsi_prefetch(c);
- /* Disabling DMA prefetch and refetch for the P600.
- * An ASIC bug may result in accesses to invalid memory addresses.
- * We've disabled prefetch for some time now. Testing with XEN
- * kernels revealed a bug in the refetch if dom0 resides on a P600.
- */
- if (c->board_id == 0x3225103C) {
- __u32 dma_prefetch;
- __u32 dma_refetch;
- dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
- dma_prefetch |= 0x8000;
- writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
- pci_read_config_dword(c->pdev, PCI_COMMAND_PARITY,
- &dma_refetch);
- dma_refetch |= 0x1;
- pci_write_config_dword(c->pdev, PCI_COMMAND_PARITY,
- dma_refetch);
- }
-
+ cciss_p600_dma_prefetch_quirk(c);
#ifdef CCISS_DEBUG
printk(KERN_WARNING "Trying to put board into Performant mode\n");
#endif /* CCISS_DEBUG */
--
GitLab
From ff5f58f06deb3f7b9a865093d7f580bbc2b9b498 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:51 -0500
Subject: [PATCH 357/863] cciss: cleanup some debug ifdefs
cciss: cleanup some debug ifdefs
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index e1c2bf1c6d644..10502a2002264 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3711,9 +3711,9 @@ static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
* the io functions.
* This is for debug only.
*/
-#ifdef CCISS_DEBUG
static void print_cfg_table(CfgTable_struct *tb)
{
+#ifdef CCISS_DEBUG
int i;
char temp_name[17];
@@ -3742,8 +3742,8 @@ static void print_cfg_table(CfgTable_struct *tb)
temp_name[16] = '\0';
printk(" Server Name = %s\n", temp_name);
printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat)));
-}
#endif /* CCISS_DEBUG */
+}
static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
{
@@ -3833,6 +3833,7 @@ cciss_put_controller_into_performant_mode(ctlr_info_t *h)
BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
+ dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n");
/* Attempt to put controller into performant mode if supported */
/* Does board support performant mode? */
trans_support = readl(&(h->cfgtable->TransportSupport));
@@ -4190,9 +4191,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
err = cciss_find_cfgtables(c);
if (err)
goto err_out_free_res;
-#ifdef CCISS_DEBUG
print_cfg_table(c->cfgtable);
-#endif /* CCISS_DEBUG */
cciss_find_board_params(c);
if (!CISS_signature_present(c)) {
@@ -4201,9 +4200,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
}
cciss_enable_scsi_prefetch(c);
cciss_p600_dma_prefetch_quirk(c);
-#ifdef CCISS_DEBUG
- printk(KERN_WARNING "Trying to put board into Performant mode\n");
-#endif /* CCISS_DEBUG */
cciss_put_controller_into_performant_mode(c);
return 0;
--
GitLab
From fe3b7527dbf1e717ccb3492bb2d84481ca7be6f9 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:45:56 -0500
Subject: [PATCH 358/863] cciss: make cciss_put_controller_into_performant_mode
as __devinit
cciss: make cciss_put_controller_into_performant_mode as __devinit
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 10502a2002264..37bc091041a04 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3816,8 +3816,7 @@ static void calc_bucket_map(int bucket[], int num_buckets,
}
}
-static void
-cciss_put_controller_into_performant_mode(ctlr_info_t *h)
+static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
{
int l = 0;
__u32 trans_support;
--
GitLab
From 0f8a6a1e7b7162a51daee7df28f1b898da1a4165 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:01 -0500
Subject: [PATCH 359/863] cciss: factor out cciss_wait_for_mode_change_ack()
cciss: factor out cciss_wait_for_mode_change_ack()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 37bc091041a04..ee7cfde8a1457 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3816,9 +3816,22 @@ static void calc_bucket_map(int bucket[], int num_buckets,
}
}
+static void __devinit cciss_wait_for_mode_change_ack(ctlr_info_t *h)
+{
+ int i;
+
+ /* under certain very rare conditions, this can take awhile.
+ * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
+ * as we enter this code.) */
+ for (i = 0; i < MAX_CONFIG_WAIT; i++) {
+ if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
+ break;
+ msleep(10);
+ }
+}
+
static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
{
- int l = 0;
__u32 trans_support;
__u32 trans_offset;
/*
@@ -3895,17 +3908,7 @@ static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
h->transMethod = CFGTBL_Trans_Performant;
writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- /* under certain very rare conditions, this can take awhile.
- * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
- * as we enter this code.) */
- for (l = 0; l < MAX_CONFIG_WAIT; l++) {
- register_value = readl(h->vaddr + SA5_DOORBELL);
- if (!(register_value & CFGTBL_ChangeReq))
- break;
- /* delay and try again */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(10);
- }
+ cciss_wait_for_mode_change_ack(h);
register_value = readl(&(h->cfgtable->TransportActive));
if (!(register_value & CFGTBL_Trans_Performant)) {
printk(KERN_WARNING "cciss: unable to get board into"
--
GitLab
From b993313540de341e4c4df8f529d585e9400f43bd Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:07 -0500
Subject: [PATCH 360/863] cciss: factor out cciss_enter_performant_mode
cciss: factor out cciss_enter_performant_mode
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 98 ++++++++++++++++++++++++++-----------------
1 file changed, 59 insertions(+), 39 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index ee7cfde8a1457..17e420c13b36c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3830,54 +3830,36 @@ static void __devinit cciss_wait_for_mode_change_ack(ctlr_info_t *h)
}
}
-static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
+static __devinit void cciss_enter_performant_mode(ctlr_info_t *h)
{
- __u32 trans_support;
+ /* This is a bit complicated. There are 8 registers on
+ * the controller which we write to to tell it 8 different
+ * sizes of commands which there may be. It's a way of
+ * reducing the DMA done to fetch each command. Encoded into
+ * each command's tag are 3 bits which communicate to the controller
+ * which of the eight sizes that command fits within. The size of
+ * each command depends on how many scatter gather entries there are.
+ * Each SG entry requires 16 bytes. The eight registers are programmed
+ * with the number of 16-byte blocks a command of that size requires.
+ * The smallest command possible requires 5 such 16 byte blocks.
+ * the largest command possible requires MAXSGENTRIES + 4 16-byte
+ * blocks. Note, this only extends to the SG entries contained
+ * within the command block, and does not extend to chained blocks
+ * of SG elements. bft[] contains the eight values we write to
+ * the registers. They are not evenly distributed, but have more
+ * sizes for small commands, and fewer sizes for larger commands.
+ */
__u32 trans_offset;
+ int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
/*
* 5 = 1 s/g entry or 4k
* 6 = 2 s/g entry or 8k
* 8 = 4 s/g entry or 16k
* 10 = 6 s/g entry or 24k
*/
- int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
unsigned long register_value;
-
BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
- dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n");
- /* Attempt to put controller into performant mode if supported */
- /* Does board support performant mode? */
- trans_support = readl(&(h->cfgtable->TransportSupport));
- if (!(trans_support & PERFORMANT_MODE))
- return;
-
- printk(KERN_WARNING "cciss%d: Placing controller into "
- "performant mode\n", h->ctlr);
- /* Performant mode demands commands on a 32 byte boundary
- * pci_alloc_consistent aligns on page boundarys already.
- * Just need to check if divisible by 32
- */
- if ((sizeof(CommandList_struct) % 32) != 0) {
- printk(KERN_WARNING "%s %d %s\n",
- "cciss info: command size[",
- (int)sizeof(CommandList_struct),
- "] not divisible by 32, no performant mode..\n");
- return;
- }
-
- /* Performant mode ring buffer and supporting data structures */
- h->reply_pool = (__u64 *)pci_alloc_consistent(
- h->pdev, h->max_commands * sizeof(__u64),
- &(h->reply_pool_dhandle));
-
- /* Need a block fetch table for performant mode */
- h->blockFetchTable = kmalloc(((h->maxsgentries+1) *
- sizeof(__u32)), GFP_KERNEL);
-
- if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL))
- goto clean_up;
-
h->reply_pool_wraparound = 1; /* spec: init to 1 */
/* Controller spec: zero out this buffer. */
@@ -3906,18 +3888,56 @@ static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
writel(CFGTBL_Trans_Performant,
&(h->cfgtable->HostWrite.TransportRequest));
- h->transMethod = CFGTBL_Trans_Performant;
writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
cciss_wait_for_mode_change_ack(h);
register_value = readl(&(h->cfgtable->TransportActive));
- if (!(register_value & CFGTBL_Trans_Performant)) {
+ if (!(register_value & CFGTBL_Trans_Performant))
printk(KERN_WARNING "cciss: unable to get board into"
" performant mode\n");
+}
+
+static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
+{
+ __u32 trans_support;
+
+ dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n");
+ /* Attempt to put controller into performant mode if supported */
+ /* Does board support performant mode? */
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & PERFORMANT_MODE))
+ return;
+
+ printk(KERN_WARNING "cciss%d: Placing controller into "
+ "performant mode\n", h->ctlr);
+ /* Performant mode demands commands on a 32 byte boundary
+ * pci_alloc_consistent aligns on page boundarys already.
+ * Just need to check if divisible by 32
+ */
+ if ((sizeof(CommandList_struct) % 32) != 0) {
+ printk(KERN_WARNING "%s %d %s\n",
+ "cciss info: command size[",
+ (int)sizeof(CommandList_struct),
+ "] not divisible by 32, no performant mode..\n");
return;
}
+ /* Performant mode ring buffer and supporting data structures */
+ h->reply_pool = (__u64 *)pci_alloc_consistent(
+ h->pdev, h->max_commands * sizeof(__u64),
+ &(h->reply_pool_dhandle));
+
+ /* Need a block fetch table for performant mode */
+ h->blockFetchTable = kmalloc(((h->maxsgentries+1) *
+ sizeof(__u32)), GFP_KERNEL);
+
+ if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL))
+ goto clean_up;
+
+ cciss_enter_performant_mode(h);
+
/* Change the access methods to the performant access methods */
h->access = SA5_performant_access;
+ h->transMethod = CFGTBL_Trans_Performant;
return;
clean_up:
--
GitLab
From 8e93bf6d6c9c6d864c17b7743f2cc5f2e052fe46 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:12 -0500
Subject: [PATCH 361/863] cciss: factor out cciss_find_cfg_addrs.
Rationale for this is that I will also need to use this code
in fixing kdump host reset code prior to having the hba structure.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 35 +++++++++++++++++++++++------------
1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 17e420c13b36c..3cd8397f82bdb 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4064,29 +4064,40 @@ static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
return -ENODEV;
}
+static int __devinit cciss_find_cfg_addrs(struct pci_dev *pdev,
+ void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
+ u64 *cfg_offset)
+{
+ *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
+ *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
+ *cfg_base_addr &= (u32) 0x0000ffff;
+ *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
+ if (*cfg_base_addr_index == -1) {
+ dev_warn(&pdev->dev, "cannot find cfg_base_addr_index, "
+ "*cfg_base_addr = 0x%08x\n", *cfg_base_addr);
+ return -ENODEV;
+ }
+ return 0;
+}
+
static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
{
u64 cfg_offset;
u32 cfg_base_addr;
u64 cfg_base_addr_index;
u32 trans_offset;
+ int rc;
- /* get the address index number */
- cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET);
- cfg_base_addr &= (u32) 0x0000ffff;
- cfg_base_addr_index = find_PCI_BAR_index(h->pdev, cfg_base_addr);
- if (cfg_base_addr_index == -1) {
- dev_warn(&h->pdev->dev, "cannot find cfg_base_addr_index\n");
- return -ENODEV;
- }
- cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET);
+ rc = cciss_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
+ &cfg_base_addr_index, &cfg_offset);
+ if (rc)
+ return rc;
h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
- cfg_base_addr_index) + cfg_offset,
- sizeof(h->cfgtable));
+ cfg_base_addr_index) + cfg_offset, sizeof(h->cfgtable));
if (!h->cfgtable)
return -ENOMEM;
/* Find performant mode table. */
- trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ trans_offset = readl(&h->cfgtable->TransMethodOffset);
h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
cfg_base_addr_index)+cfg_offset+trans_offset,
sizeof(*h->transtable));
--
GitLab
From 83123cb11b5a5205233c59357da2c8d9a8dc9d24 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:17 -0500
Subject: [PATCH 362/863] cciss: factor out cciss_reset_devices()
cciss: factor out cciss_reset_devices()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 51 ++++++++++++++++++++++++++-----------------
drivers/block/cciss.h | 3 +++
2 files changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 3cd8397f82bdb..f49dcd734d1b4 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4486,6 +4486,34 @@ static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
return 0;
}
+static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
+{
+ int i;
+
+ if (!reset_devices)
+ return 0;
+
+ /* Reset the controller with a PCI power-cycle */
+ if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
+ return -ENODEV;
+
+ /* Some devices (notably the HP Smart Array 5i Controller)
+ need a little pause here */
+ msleep(CCISS_POST_RESET_PAUSE_MSECS);
+
+ /* Now try to get the controller to respond to a no-op */
+ for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
+ if (cciss_noop(pdev) == 0)
+ break;
+ else
+ dev_warn(&pdev->dev, "no-op failed%s\n",
+ (i < CCISS_POST_RESET_NOOP_RETRIES - 1 ?
+ "; re-trying" : ""));
+ msleep(CCISS_POST_RESET_NOOP_INTERVAL_MSECS);
+ }
+ return 0;
+}
+
/*
* This is it. Find all the controllers and register them. I really hate
* stealing all these major device numbers.
@@ -4501,26 +4529,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
int dac, return_code;
InquiryData_struct *inq_buff;
- if (reset_devices) {
- /* Reset the controller with a PCI power-cycle */
- if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
- return -ENODEV;
-
- /* Now try to get the controller to respond to a no-op. Some
- devices (notably the HP Smart Array 5i Controller) need
- up to 30 seconds to respond. */
- for (i=0; i<30; i++) {
- if (cciss_noop(pdev) == 0)
- break;
-
- schedule_timeout_uninterruptible(HZ);
- }
- if (i == 30) {
- printk(KERN_ERR "cciss: controller seems dead\n");
- return -EBUSY;
- }
- }
-
+ rc = cciss_init_reset_devices(pdev);
+ if (rc)
+ return rc;
i = alloc_cciss_hba();
if (i < 0)
return -1;
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index c2ef9dd56c459..4290b7f0f6394 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -204,6 +204,9 @@ struct ctlr_info
#define CCISS_BOARD_READY_ITERATIONS \
((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_POST_RESET_PAUSE_MSECS (3000)
+#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
+#define CCISS_POST_RESET_NOOP_RETRIES (12)
/*
Send the command to the hardware
--
GitLab
From a6528d017234b483283274fbdd360f3541befe19 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:22 -0500
Subject: [PATCH 363/863] cciss: fix hard reset code.
cciss: Fix hard reset code.
Smart Array controllers newer than the P600 do not honor the
PCI power state method of resetting the controllers. Instead,
in these cases we can get them to reset via the "doorbell" register.
This escaped notice until we began using "performant" mode because
the fact that the controllers did not reset did not normally
impede subsequent operation, and so things generally appeared to
"work". Once the performant mode code was added, if the controller
does not reset, it remains in performant mode. The code immediately
after the reset presumes the controller is in "simple" mode
(which previously, it had remained in simple mode the whole time).
If the controller remains in performant mode any code which presumes
it is in simple mode will not work. So the reset needs to be fixed.
Unfortunately there are some controllers which cannot be reset by
either method. (eg. p800). We detect these cases by noticing that
the controller seems to remain in performant mode even after a
reset has been attempted. In those cases we ignore the controller,
as any commands outstanding on it will result in stale completions.
To sum up, we try to do a better job of resetting the controller if
"reset_devices" is set, and if it doesn't work, we ignore that
controller.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 200 ++++++++++++++++++++++++++++----------
drivers/block/cciss_cmd.h | 4 +
2 files changed, 152 insertions(+), 52 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index f49dcd734d1b4..b3060eced5530 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -216,6 +216,12 @@ static void cciss_device_release(struct device *dev);
static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
static inline u32 next_command(ctlr_info_t *h);
+static int __devinit cciss_find_cfg_addrs(struct pci_dev *pdev,
+ void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
+ u64 *cfg_offset);
+static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
+ unsigned long *memory_bar);
+
/* performant mode helper functions */
static void calc_bucket_map(int *bucket, int num_buckets, int nsgs,
@@ -4413,68 +4419,130 @@ static __devinit int cciss_reset_msi(struct pci_dev *pdev)
return 0;
}
-/* This does a hard reset of the controller using PCI power management
- * states. */
-static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
+static int cciss_controller_hard_reset(struct pci_dev *pdev,
+ void * __iomem vaddr, bool use_doorbell)
{
- u16 pmcsr, saved_config_space[32];
- int i, pos;
+ u16 pmcsr;
+ int pos;
- printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+ if (use_doorbell) {
+ /* For everything after the P600, the PCI power state method
+ * of resetting the controller doesn't work, so we have this
+ * other way using the doorbell register.
+ */
+ dev_info(&pdev->dev, "using doorbell to reset controller\n");
+ writel(DOORBELL_CTLR_RESET, vaddr + SA5_DOORBELL);
+ msleep(1000);
+ } else { /* Try to do it the PCI power state way */
+
+ /* Quoting from the Open CISS Specification: "The Power
+ * Management Control/Status Register (CSR) controls the power
+ * state of the device. The normal operating state is D0,
+ * CSR=00h. The software off state is D3, CSR=03h. To reset
+ * the controller, place the interface device in D3 then to D0,
+ * this causes a secondary PCI reset which will reset the
+ * controller." */
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ dev_err(&pdev->dev,
+ "cciss_controller_hard_reset: "
+ "PCI PM not supported\n");
+ return -ENODEV;
+ }
+ dev_info(&pdev->dev, "using PCI PM to reset controller\n");
+ /* enter the D3hot power management state */
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D3hot;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
- /* This is very nearly the same thing as
+ msleep(500);
- pci_save_state(pci_dev);
- pci_set_power_state(pci_dev, PCI_D3hot);
- pci_set_power_state(pci_dev, PCI_D0);
- pci_restore_state(pci_dev);
+ /* enter the D0 power management state */
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D0;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
- but we can't use these nice canned kernel routines on
- kexec, because they also check the MSI/MSI-X state in PCI
- configuration space and do the wrong thing when it is
- set/cleared. Also, the pci_save/restore_state functions
- violate the ordering requirements for restoring the
- configuration space from the CCISS document (see the
- comment below). So we roll our own .... */
+ msleep(500);
+ }
+ return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states or using the doorbell register. */
+static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
+{
+ u16 saved_config_space[32];
+ u64 cfg_offset;
+ u32 cfg_base_addr;
+ u64 cfg_base_addr_index;
+ void __iomem *vaddr;
+ unsigned long paddr;
+ u32 misc_fw_support, active_transport;
+ int rc, i;
+ CfgTable_struct __iomem *cfgtable;
+ bool use_doorbell;
+
+ /* For controllers as old a the p600, this is very nearly
+ * the same thing as
+ *
+ * pci_save_state(pci_dev);
+ * pci_set_power_state(pci_dev, PCI_D3hot);
+ * pci_set_power_state(pci_dev, PCI_D0);
+ * pci_restore_state(pci_dev);
+ *
+ * but we can't use these nice canned kernel routines on
+ * kexec, because they also check the MSI/MSI-X state in PCI
+ * configuration space and do the wrong thing when it is
+ * set/cleared. Also, the pci_save/restore_state functions
+ * violate the ordering requirements for restoring the
+ * configuration space from the CCISS document (see the
+ * comment below). So we roll our own ....
+ *
+ * For controllers newer than the P600, the pci power state
+ * method of resetting doesn't work so we have another way
+ * using the doorbell register.
+ */
for (i = 0; i < 32; i++)
pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
- return -ENODEV;
- }
-
- /* Quoting from the Open CISS Specification: "The Power
- * Management Control/Status Register (CSR) controls the power
- * state of the device. The normal operating state is D0,
- * CSR=00h. The software off state is D3, CSR=03h. To reset
- * the controller, place the interface device in D3 then to
- * D0, this causes a secondary PCI reset which will reset the
- * controller." */
-
- /* enter the D3hot power management state */
- pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D3hot;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ /* find the first memory BAR, so we can find the cfg table */
+ rc = cciss_pci_find_memory_BAR(pdev, &paddr);
+ if (rc)
+ return rc;
+ vaddr = remap_pci_mem(paddr, 0x250);
+ if (!vaddr)
+ return -ENOMEM;
- schedule_timeout_uninterruptible(HZ >> 1);
+ /* find cfgtable in order to check if reset via doorbell is supported */
+ rc = cciss_find_cfg_addrs(pdev, vaddr, &cfg_base_addr,
+ &cfg_base_addr_index, &cfg_offset);
+ if (rc)
+ goto unmap_vaddr;
+ cfgtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable));
+ if (!cfgtable) {
+ rc = -ENOMEM;
+ goto unmap_vaddr;
+ }
- /* enter the D0 power management state */
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D0;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+ /* If reset via doorbell register is supported, use that. */
+ misc_fw_support = readl(&cfgtable->misc_fw_support);
+ use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
- schedule_timeout_uninterruptible(HZ >> 1);
+ rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
+ if (rc)
+ goto unmap_cfgtable;
/* Restore the PCI configuration space. The Open CISS
* Specification says, "Restore the PCI Configuration
* Registers, offsets 00h through 60h. It is important to
* restore the command register, 16-bits at offset 04h,
* last. Do not restore the configuration status register,
- * 16-bits at offset 06h." Note that the offset is 2*i. */
+ * 16-bits at offset 06h." Note that the offset is 2*i.
+ */
for (i = 0; i < 32; i++) {
if (i == 2 || i == 3)
continue;
@@ -4483,23 +4551,51 @@ static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
wmb();
pci_write_config_word(pdev, 4, saved_config_space[2]);
- return 0;
+ /* Some devices (notably the HP Smart Array 5i Controller)
+ need a little pause here */
+ msleep(CCISS_POST_RESET_PAUSE_MSECS);
+
+ /* Controller should be in simple mode at this point. If it's not,
+ * It means we're on one of those controllers which doesn't support
+ * the doorbell reset method and on which the PCI power management reset
+ * method doesn't work (P800, for example.)
+ * In those cases, don't try to proceed, as it generally doesn't work.
+ */
+ active_transport = readl(&cfgtable->TransportActive);
+ if (active_transport & PERFORMANT_MODE) {
+ dev_warn(&pdev->dev, "Unable to successfully reset controller,"
+ " Ignoring controller.\n");
+ rc = -ENODEV;
+ }
+
+unmap_cfgtable:
+ iounmap(cfgtable);
+
+unmap_vaddr:
+ iounmap(vaddr);
+ return rc;
}
static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
{
- int i;
+ int rc, i;
if (!reset_devices)
return 0;
- /* Reset the controller with a PCI power-cycle */
- if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
- return -ENODEV;
+ /* Reset the controller with a PCI power-cycle or via doorbell */
+ rc = cciss_kdump_hard_reset_controller(pdev);
- /* Some devices (notably the HP Smart Array 5i Controller)
- need a little pause here */
- msleep(CCISS_POST_RESET_PAUSE_MSECS);
+ /* -ENOTSUPP here means we cannot reset the controller
+ * but it's already (and still) up and running in
+ * "performant mode".
+ */
+ if (rc == -ENOTSUPP)
+ return 0; /* just try to do the kdump anyhow. */
+ if (rc)
+ return -ENODEV;
+ if (cciss_reset_msi(pdev))
+ return -ENODEV;
/* Now try to get the controller to respond to a no-op */
for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index 936b9666da6a6..eb060f1b00b67 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -52,6 +52,7 @@
/* Configuration Table */
#define CFGTBL_ChangeReq 0x00000001l
#define CFGTBL_AccCmds 0x00000001l
+#define DOORBELL_CTLR_RESET 0x00000004l
#define CFGTBL_Trans_Simple 0x00000002l
#define CFGTBL_Trans_Performant 0x00000004l
@@ -230,6 +231,9 @@ typedef struct _CfgTable_struct {
DWORD MaxPhysicalDrives;
DWORD MaxPhysicalDrivesPerLogicalUnit;
DWORD MaxPerformantModeCommands;
+ u8 reserved[0x78 - 0x58];
+ u32 misc_fw_support; /* offset 0x78 */
+#define MISC_FW_DOORBELL_RESET (0x02)
} CfgTable_struct;
struct TransTable_struct {
--
GitLab
From adfbc1ff342ece2e482254bcc5381fadfffbbb89 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:28 -0500
Subject: [PATCH 364/863] cciss: sanitize max commands
cciss: sanitize max commands
Some controllers might try to tell us they support 0 commands
in performant mode. This is a lie told by buggy firmware.
We have to be wary of this lest we try to allocate a negative
number of command blocks, which will be treated as unsigned,
and get an out of memory condition.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b3060eced5530..6d4c4f227d55b 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4112,13 +4112,25 @@ static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
return 0;
}
+static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
+{
+ h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+ if (h->max_commands < 16) {
+ dev_warn(&h->pdev->dev, "Controller reports "
+ "max supported commands of %d, an obvious lie. "
+ "Using 16. Ensure that firmware is up to date.\n",
+ h->max_commands);
+ h->max_commands = 16;
+ }
+}
+
/* Interrogate the hardware for some limits:
* max commands, max SG elements without chaining, and with chaining,
* SG chain block size, etc.
*/
static void __devinit cciss_find_board_params(ctlr_info_t *h)
{
- h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+ cciss_get_max_perf_mode_cmds(h);
h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
h->maxsgentries = readl(&(h->cfgtable->MaxSGElements));
/*
--
GitLab
From 058a0f9f31283d5eb9d8686d3b4f69e55d1589f1 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:33 -0500
Subject: [PATCH 365/863] cciss: forbid hard reset of 640x boards
cciss: forbid hard reset of 640x boards
The 6402/6404 are two PCI devices -- two Smart Array controllers
-- that fit into one slot. It is possible to reset them independently,
however, they share a battery backed cache module. One of the pair
controls the cache and the 2nd one access the cache through the first
one. If you reset the one controlling the cache, the other one will
not be a happy camper. So we just forbid resetting this conjoined
mess.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 6d4c4f227d55b..2abe6df9445e2 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4495,6 +4495,7 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
int rc, i;
CfgTable_struct __iomem *cfgtable;
bool use_doorbell;
+ u32 board_id;
/* For controllers as old a the p600, this is very nearly
* the same thing as
@@ -4517,6 +4518,19 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
* using the doorbell register.
*/
+ /* Exclude 640x boards. These are two pci devices in one slot
+ * which share a battery backed cache module. One controls the
+ * cache, the other accesses the cache through the one that controls
+ * it. If we reset the one controlling the cache, the other will
+ * likely not be happy. Just forbid resetting this conjoined mess.
+ */
+ cciss_lookup_board_id(pdev, &board_id);
+ if (board_id == 0x409C0E11 || board_id == 0x409D0E11) {
+ dev_warn(&pdev->dev, "Cannot reset Smart Array 640x "
+ "due to shared cache module.");
+ return -ENODEV;
+ }
+
for (i = 0; i < 32; i++)
pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
@@ -4600,7 +4614,8 @@ static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
/* -ENOTSUPP here means we cannot reset the controller
* but it's already (and still) up and running in
- * "performant mode".
+ * "performant mode". Or, it might be 640x, which can't reset
+ * due to concerns about shared bbwc between 6402/6404 pair.
*/
if (rc == -ENOTSUPP)
return 0; /* just try to do the kdump anyhow. */
--
GitLab
From f70dba83669bf718c2f1731f0f58b8149e883593 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:38 -0500
Subject: [PATCH 366/863] cciss: use consistent variable names
cciss: use consistent variable names
"h", for the hba structure and "c" for the command structures.
and get rid of trivial CCISS_LOCK macro.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 611 ++++++++++++++++++-------------------
drivers/block/cciss.h | 2 -
drivers/block/cciss_scsi.c | 591 +++++++++++++++++------------------
3 files changed, 592 insertions(+), 612 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 2abe6df9445e2..70ad24f3604f5 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -191,17 +191,17 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
static int deregister_disk(ctlr_info_t *h, int drv_index,
int clear_all, int via_ioctl);
-static void cciss_read_capacity(int ctlr, int logvol,
+static void cciss_read_capacity(ctlr_info_t *h, int logvol,
sector_t *total_size, unsigned int *block_size);
-static void cciss_read_capacity_16(int ctlr, int logvol,
+static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
sector_t *total_size, unsigned int *block_size);
-static void cciss_geometry_inquiry(int ctlr, int logvol,
+static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
sector_t total_size,
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
static void __devinit cciss_interrupt_mode(ctlr_info_t *);
static void start_io(ctlr_info_t *h);
-static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
+static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
__u8 page_code, unsigned char scsi3addr[],
int cmd_type);
static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
@@ -229,9 +229,9 @@ static void calc_bucket_map(int *bucket, int num_buckets, int nsgs,
static void cciss_put_controller_into_performant_mode(ctlr_info_t *h);
#ifdef CONFIG_PROC_FS
-static void cciss_procinit(int i);
+static void cciss_procinit(ctlr_info_t *h);
#else
-static void cciss_procinit(int i)
+static void cciss_procinit(ctlr_info_t *h)
{
}
#endif /* CONFIG_PROC_FS */
@@ -416,26 +416,25 @@ static void cciss_seq_show_header(struct seq_file *seq)
h->maxQsinceinit, h->max_outstanding, h->maxSG);
#ifdef CONFIG_CISS_SCSI_TAPE
- cciss_seq_tape_report(seq, h->ctlr);
+ cciss_seq_tape_report(seq, h);
#endif /* CONFIG_CISS_SCSI_TAPE */
}
static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
{
ctlr_info_t *h = seq->private;
- unsigned ctlr = h->ctlr;
unsigned long flags;
/* prevent displaying bogus info during configuration
* or deconfiguration of a logical volume
*/
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return ERR_PTR(-EBUSY);
}
h->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (*pos == 0)
cciss_seq_show_header(seq);
@@ -543,7 +542,7 @@ cciss_proc_write(struct file *file, const char __user *buf,
struct seq_file *seq = file->private_data;
ctlr_info_t *h = seq->private;
- err = cciss_engage_scsi(h->ctlr);
+ err = cciss_engage_scsi(h);
if (err == 0)
err = length;
} else
@@ -566,7 +565,7 @@ static const struct file_operations cciss_proc_fops = {
.write = cciss_proc_write,
};
-static void __devinit cciss_procinit(int i)
+static void __devinit cciss_procinit(ctlr_info_t *h)
{
struct proc_dir_entry *pde;
@@ -574,9 +573,9 @@ static void __devinit cciss_procinit(int i)
proc_cciss = proc_mkdir("driver/cciss", NULL);
if (!proc_cciss)
return;
- pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ pde = proc_create_data(h->devname, S_IWUSR | S_IRUSR | S_IRGRP |
S_IROTH, proc_cciss,
- &cciss_proc_fops, hba[i]);
+ &cciss_proc_fops, h);
}
#endif /* CONFIG_PROC_FS */
@@ -609,12 +608,12 @@ static ssize_t dev_show_unique_id(struct device *dev,
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring)
ret = -EBUSY;
else
memcpy(sn, drv->serial_no, sizeof(sn));
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (ret)
return ret;
@@ -639,12 +638,12 @@ static ssize_t dev_show_vendor(struct device *dev,
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring)
ret = -EBUSY;
else
memcpy(vendor, drv->vendor, VENDOR_LEN + 1);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (ret)
return ret;
@@ -663,12 +662,12 @@ static ssize_t dev_show_model(struct device *dev,
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring)
ret = -EBUSY;
else
memcpy(model, drv->model, MODEL_LEN + 1);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (ret)
return ret;
@@ -687,12 +686,12 @@ static ssize_t dev_show_rev(struct device *dev,
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring)
ret = -EBUSY;
else
memcpy(rev, drv->rev, REV_LEN + 1);
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (ret)
return ret;
@@ -709,17 +708,17 @@ static ssize_t cciss_show_lunid(struct device *dev,
unsigned long flags;
unsigned char lunid[8];
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -EBUSY;
}
if (!drv->heads) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -ENOTTY;
}
memcpy(lunid, drv->LunID, sizeof(lunid));
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
lunid[0], lunid[1], lunid[2], lunid[3],
lunid[4], lunid[5], lunid[6], lunid[7]);
@@ -734,13 +733,13 @@ static ssize_t cciss_show_raid_level(struct device *dev,
int raid;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -EBUSY;
}
raid = drv->raid_level;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (raid < 0 || raid > RAID_UNKNOWN)
raid = RAID_UNKNOWN;
@@ -757,13 +756,13 @@ static ssize_t cciss_show_usage_count(struct device *dev,
unsigned long flags;
int count;
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -EBUSY;
}
count = drv->usage_count;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return snprintf(buf, 20, "%d\n", count);
}
static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
@@ -1012,7 +1011,7 @@ static inline drive_info_struct *get_drv(struct gendisk *disk)
*/
static int cciss_open(struct block_device *bdev, fmode_t mode)
{
- ctlr_info_t *host = get_host(bdev->bd_disk);
+ ctlr_info_t *h = get_host(bdev->bd_disk);
drive_info_struct *drv = get_drv(bdev->bd_disk);
#ifdef CCISS_DEBUG
@@ -1044,7 +1043,7 @@ static int cciss_open(struct block_device *bdev, fmode_t mode)
return -EPERM;
}
drv->usage_count++;
- host->usage_count++;
+ h->usage_count++;
return 0;
}
@@ -1064,11 +1063,11 @@ static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode)
*/
static int cciss_release(struct gendisk *disk, fmode_t mode)
{
- ctlr_info_t *host;
+ ctlr_info_t *h;
drive_info_struct *drv;
lock_kernel();
- host = get_host(disk);
+ h = get_host(disk);
drv = get_drv(disk);
#ifdef CCISS_DEBUG
@@ -1076,7 +1075,7 @@ static int cciss_release(struct gendisk *disk, fmode_t mode)
#endif /* CCISS_DEBUG */
drv->usage_count--;
- host->usage_count--;
+ h->usage_count--;
unlock_kernel();
return 0;
}
@@ -1223,11 +1222,11 @@ static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
-static void check_ioctl_unit_attention(ctlr_info_t *host, CommandList_struct *c)
+static void check_ioctl_unit_attention(ctlr_info_t *h, CommandList_struct *c)
{
if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
- (void)check_for_unit_attention(host, c);
+ (void)check_for_unit_attention(h, c);
}
/*
* ioctl
@@ -1236,9 +1235,8 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct gendisk *disk = bdev->bd_disk;
- ctlr_info_t *host = get_host(disk);
+ ctlr_info_t *h = get_host(disk);
drive_info_struct *drv = get_drv(disk);
- int ctlr = host->ctlr;
void __user *argp = (void __user *)arg;
#ifdef CCISS_DEBUG
@@ -1252,10 +1250,10 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (!arg)
return -EINVAL;
- pciinfo.domain = pci_domain_nr(host->pdev->bus);
- pciinfo.bus = host->pdev->bus->number;
- pciinfo.dev_fn = host->pdev->devfn;
- pciinfo.board_id = host->board_id;
+ pciinfo.domain = pci_domain_nr(h->pdev->bus);
+ pciinfo.bus = h->pdev->bus->number;
+ pciinfo.dev_fn = h->pdev->devfn;
+ pciinfo.board_id = h->board_id;
if (copy_to_user
(argp, &pciinfo, sizeof(cciss_pci_info_struct)))
return -EFAULT;
@@ -1267,9 +1265,9 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (!arg)
return -EINVAL;
intinfo.delay =
- readl(&host->cfgtable->HostWrite.CoalIntDelay);
+ readl(&h->cfgtable->HostWrite.CoalIntDelay);
intinfo.count =
- readl(&host->cfgtable->HostWrite.CoalIntCount);
+ readl(&h->cfgtable->HostWrite.CoalIntCount);
if (copy_to_user
(argp, &intinfo, sizeof(cciss_coalint_struct)))
return -EFAULT;
@@ -1293,22 +1291,22 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
// printk("cciss_ioctl: delay and count cannot be 0\n");
return -EINVAL;
}
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
/* Update the field, and then ring the doorbell */
writel(intinfo.delay,
- &(host->cfgtable->HostWrite.CoalIntDelay));
+ &(h->cfgtable->HostWrite.CoalIntDelay));
writel(intinfo.count,
- &(host->cfgtable->HostWrite.CoalIntCount));
- writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
+ &(h->cfgtable->HostWrite.CoalIntCount));
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
- if (!(readl(host->vaddr + SA5_DOORBELL)
+ if (!(readl(h->vaddr + SA5_DOORBELL)
& CFGTBL_ChangeReq))
break;
/* delay and try again */
udelay(1000);
}
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (i >= MAX_IOCTL_CONFIG_WAIT)
return -EAGAIN;
return 0;
@@ -1322,7 +1320,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
return -EINVAL;
for (i = 0; i < 16; i++)
NodeName[i] =
- readb(&host->cfgtable->ServerName[i]);
+ readb(&h->cfgtable->ServerName[i]);
if (copy_to_user(argp, NodeName, sizeof(NodeName_type)))
return -EFAULT;
return 0;
@@ -1342,23 +1340,23 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
(NodeName, argp, sizeof(NodeName_type)))
return -EFAULT;
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
/* Update the field, and then ring the doorbell */
for (i = 0; i < 16; i++)
writeb(NodeName[i],
- &host->cfgtable->ServerName[i]);
+ &h->cfgtable->ServerName[i]);
- writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
- if (!(readl(host->vaddr + SA5_DOORBELL)
+ if (!(readl(h->vaddr + SA5_DOORBELL)
& CFGTBL_ChangeReq))
break;
/* delay and try again */
udelay(1000);
}
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
if (i >= MAX_IOCTL_CONFIG_WAIT)
return -EAGAIN;
return 0;
@@ -1370,7 +1368,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (!arg)
return -EINVAL;
- heartbeat = readl(&host->cfgtable->HeartBeat);
+ heartbeat = readl(&h->cfgtable->HeartBeat);
if (copy_to_user
(argp, &heartbeat, sizeof(Heartbeat_type)))
return -EFAULT;
@@ -1382,7 +1380,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (!arg)
return -EINVAL;
- BusTypes = readl(&host->cfgtable->BusTypes);
+ BusTypes = readl(&h->cfgtable->BusTypes);
if (copy_to_user
(argp, &BusTypes, sizeof(BusTypes_type)))
return -EFAULT;
@@ -1394,7 +1392,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (!arg)
return -EINVAL;
- memcpy(firmware, host->firm_ver, 4);
+ memcpy(firmware, h->firm_ver, 4);
if (copy_to_user
(argp, firmware, sizeof(FirmwareVer_type)))
@@ -1417,7 +1415,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
case CCISS_DEREGDISK:
case CCISS_REGNEWD:
case CCISS_REVALIDVOLS:
- return rebuild_lun_table(host, 0, 1);
+ return rebuild_lun_table(h, 0, 1);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
@@ -1472,7 +1470,8 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
} else {
memset(buff, 0, iocommand.buf_size);
}
- if ((c = cmd_alloc(host, 0)) == NULL) {
+ c = cmd_alloc(h, 0);
+ if (!c) {
kfree(buff);
return -ENOMEM;
}
@@ -1498,7 +1497,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
/* Fill in the scatter gather information */
if (iocommand.buf_size > 0) {
- temp64.val = pci_map_single(host->pdev, buff,
+ temp64.val = pci_map_single(h->pdev, buff,
iocommand.buf_size,
PCI_DMA_BIDIRECTIONAL);
c->SG[0].Addr.lower = temp64.val32.lower;
@@ -1508,24 +1507,24 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
}
c->waiting = &wait;
- enqueue_cmd_and_start_io(host, c);
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
/* unlock the buffers from DMA */
temp64.val32.lower = c->SG[0].Addr.lower;
temp64.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(host->pdev, (dma_addr_t) temp64.val,
+ pci_unmap_single(h->pdev, (dma_addr_t) temp64.val,
iocommand.buf_size,
PCI_DMA_BIDIRECTIONAL);
- check_ioctl_unit_attention(host, c);
+ check_ioctl_unit_attention(h, c);
/* Copy the error information out */
iocommand.error_info = *(c->err_info);
if (copy_to_user
(argp, &iocommand, sizeof(IOCTL_Command_struct))) {
kfree(buff);
- cmd_free(host, c, 0);
+ cmd_free(h, c, 0);
return -EFAULT;
}
@@ -1534,12 +1533,12 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (copy_to_user
(iocommand.buf, buff, iocommand.buf_size)) {
kfree(buff);
- cmd_free(host, c, 0);
+ cmd_free(h, c, 0);
return -EFAULT;
}
}
kfree(buff);
- cmd_free(host, c, 0);
+ cmd_free(h, c, 0);
return 0;
}
case CCISS_BIG_PASSTHRU:{
@@ -1621,7 +1620,8 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
data_ptr += sz;
sg_used++;
}
- if ((c = cmd_alloc(host, 0)) == NULL) {
+ c = cmd_alloc(h, 0);
+ if (!c) {
status = -ENOMEM;
goto cleanup1;
}
@@ -1642,7 +1642,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (ioc->buf_size > 0) {
for (i = 0; i < sg_used; i++) {
temp64.val =
- pci_map_single(host->pdev, buff[i],
+ pci_map_single(h->pdev, buff[i],
buff_size[i],
PCI_DMA_BIDIRECTIONAL);
c->SG[i].Addr.lower =
@@ -1654,21 +1654,21 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
}
}
c->waiting = &wait;
- enqueue_cmd_and_start_io(host, c);
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
/* unlock the buffers from DMA */
for (i = 0; i < sg_used; i++) {
temp64.val32.lower = c->SG[i].Addr.lower;
temp64.val32.upper = c->SG[i].Addr.upper;
- pci_unmap_single(host->pdev,
+ pci_unmap_single(h->pdev,
(dma_addr_t) temp64.val, buff_size[i],
PCI_DMA_BIDIRECTIONAL);
}
- check_ioctl_unit_attention(host, c);
+ check_ioctl_unit_attention(h, c);
/* Copy the error information out */
ioc->error_info = *(c->err_info);
if (copy_to_user(argp, ioc, sizeof(*ioc))) {
- cmd_free(host, c, 0);
+ cmd_free(h, c, 0);
status = -EFAULT;
goto cleanup1;
}
@@ -1678,14 +1678,14 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
for (i = 0; i < sg_used; i++) {
if (copy_to_user
(ptr, buff[i], buff_size[i])) {
- cmd_free(host, c, 0);
+ cmd_free(h, c, 0);
status = -EFAULT;
goto cleanup1;
}
ptr += buff_size[i];
}
}
- cmd_free(host, c, 0);
+ cmd_free(h, c, 0);
status = 0;
cleanup1:
if (buff) {
@@ -1773,26 +1773,26 @@ static void cciss_check_queues(ctlr_info_t *h)
static void cciss_softirq_done(struct request *rq)
{
- CommandList_struct *cmd = rq->completion_data;
- ctlr_info_t *h = hba[cmd->ctlr];
- SGDescriptor_struct *curr_sg = cmd->SG;
+ CommandList_struct *c = rq->completion_data;
+ ctlr_info_t *h = hba[c->ctlr];
+ SGDescriptor_struct *curr_sg = c->SG;
u64bit temp64;
unsigned long flags;
int i, ddir;
int sg_index = 0;
- if (cmd->Request.Type.Direction == XFER_READ)
+ if (c->Request.Type.Direction == XFER_READ)
ddir = PCI_DMA_FROMDEVICE;
else
ddir = PCI_DMA_TODEVICE;
/* command did not need to be retried */
/* unmap the DMA mapping for all the scatter gather elements */
- for (i = 0; i < cmd->Header.SGList; i++) {
+ for (i = 0; i < c->Header.SGList; i++) {
if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) {
- cciss_unmap_sg_chain_block(h, cmd);
+ cciss_unmap_sg_chain_block(h, c);
/* Point to the next block */
- curr_sg = h->cmd_sg_list[cmd->cmdindex];
+ curr_sg = h->cmd_sg_list[c->cmdindex];
sg_index = 0;
}
temp64.val32.lower = curr_sg[sg_index].Addr.lower;
@@ -1808,12 +1808,12 @@ static void cciss_softirq_done(struct request *rq)
/* set the residual count for pc requests */
if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
- rq->resid_len = cmd->err_info->ResidualCnt;
+ rq->resid_len = c->err_info->ResidualCnt;
blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
spin_lock_irqsave(&h->lock, flags);
- cmd_free(h, cmd, 1);
+ cmd_free(h, c, 1);
cciss_check_queues(h);
spin_unlock_irqrestore(&h->lock, flags);
}
@@ -1829,7 +1829,7 @@ static inline void log_unit_to_scsi3addr(ctlr_info_t *h,
* via the inquiry page 0. Model, vendor, and rev are set to empty strings if
* they cannot be read.
*/
-static void cciss_get_device_descr(int ctlr, int logvol,
+static void cciss_get_device_descr(ctlr_info_t *h, int logvol,
char *vendor, char *model, char *rev)
{
int rc;
@@ -1844,8 +1844,8 @@ static void cciss_get_device_descr(int ctlr, int logvol,
if (!inq_buf)
return;
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf, sizeof(*inq_buf), 0,
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ rc = sendcmd_withirq(h, CISS_INQUIRY, inq_buf, sizeof(*inq_buf), 0,
scsi3addr, TYPE_CMD);
if (rc == IO_OK) {
memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
@@ -1865,7 +1865,7 @@ static void cciss_get_device_descr(int ctlr, int logvol,
* number cannot be had, for whatever reason, 16 bytes of 0xff
* are returned instead.
*/
-static void cciss_get_serial_no(int ctlr, int logvol,
+static void cciss_get_serial_no(ctlr_info_t *h, int logvol,
unsigned char *serial_no, int buflen)
{
#define PAGE_83_INQ_BYTES 64
@@ -1880,8 +1880,8 @@ static void cciss_get_serial_no(int ctlr, int logvol,
if (!buf)
return;
memset(serial_no, 0, buflen);
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ rc = sendcmd_withirq(h, CISS_INQUIRY, buf,
PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
if (rc == IO_OK)
memcpy(serial_no, &buf[8], buflen);
@@ -1947,10 +1947,9 @@ static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
* is also the controller node. Any changes to disk 0 will show up on
* the next reboot.
*/
-static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
- int via_ioctl)
+static void cciss_update_drive_info(ctlr_info_t *h, int drv_index,
+ int first_time, int via_ioctl)
{
- ctlr_info_t *h = hba[ctlr];
struct gendisk *disk;
InquiryData_struct *inq_buff = NULL;
unsigned int block_size;
@@ -1967,16 +1966,16 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
/* testing to see if 16-byte CDBs are already being used */
if (h->cciss_read == CCISS_READ_16) {
- cciss_read_capacity_16(h->ctlr, drv_index,
+ cciss_read_capacity_16(h, drv_index,
&total_size, &block_size);
} else {
- cciss_read_capacity(ctlr, drv_index, &total_size, &block_size);
+ cciss_read_capacity(h, drv_index, &total_size, &block_size);
/* if read_capacity returns all F's this volume is >2TB */
/* in size so we switch to 16-byte CDB's for all */
/* read/write ops */
if (total_size == 0xFFFFFFFFULL) {
- cciss_read_capacity_16(ctlr, drv_index,
+ cciss_read_capacity_16(h, drv_index,
&total_size, &block_size);
h->cciss_read = CCISS_READ_16;
h->cciss_write = CCISS_WRITE_16;
@@ -1986,14 +1985,14 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
}
}
- cciss_geometry_inquiry(ctlr, drv_index, total_size, block_size,
+ cciss_geometry_inquiry(h, drv_index, total_size, block_size,
inq_buff, drvinfo);
drvinfo->block_size = block_size;
drvinfo->nr_blocks = total_size + 1;
- cciss_get_device_descr(ctlr, drv_index, drvinfo->vendor,
+ cciss_get_device_descr(h, drv_index, drvinfo->vendor,
drvinfo->model, drvinfo->rev);
- cciss_get_serial_no(ctlr, drv_index, drvinfo->serial_no,
+ cciss_get_serial_no(h, drv_index, drvinfo->serial_no,
sizeof(drvinfo->serial_no));
/* Save the lunid in case we deregister the disk, below. */
memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
@@ -2019,9 +2018,9 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
*/
if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
printk(KERN_WARNING "disk %d has changed.\n", drv_index);
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
h->drv[drv_index]->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
/* deregister_disk sets h->drv[drv_index]->queue = NULL
* which keeps the interrupt handler from starting
@@ -2243,7 +2242,6 @@ static void cciss_add_controller_node(ctlr_info_t *h)
static int rebuild_lun_table(ctlr_info_t *h, int first_time,
int via_ioctl)
{
- int ctlr = h->ctlr;
int num_luns;
ReportLunData_struct *ld_buff = NULL;
int return_code;
@@ -2258,19 +2256,19 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time,
return -EPERM;
/* Set busy_configuring flag for this operation */
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
if (h->busy_configuring) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return -EBUSY;
}
h->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
if (ld_buff == NULL)
goto mem_msg;
- return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+ return_code = sendcmd_withirq(h, CISS_REPORT_LOG, ld_buff,
sizeof(ReportLunData_struct),
0, CTLR_LUNID, TYPE_CMD);
@@ -2317,9 +2315,9 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time,
}
if (!drv_found) {
/* Deregister it from the OS, it's gone. */
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
h->drv[i]->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return_code = deregister_disk(h, i, 1, via_ioctl);
if (h->drv[i] != NULL)
h->drv[i]->busy_configuring = 0;
@@ -2358,8 +2356,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time,
if (drv_index == -1)
goto freeret;
}
- cciss_update_drive_info(ctlr, drv_index, first_time,
- via_ioctl);
+ cciss_update_drive_info(h, drv_index, first_time, via_ioctl);
} /* end for */
freeret:
@@ -2491,11 +2488,10 @@ static int deregister_disk(ctlr_info_t *h, int drv_index,
return 0;
}
-static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
size_t size, __u8 page_code, unsigned char *scsi3addr,
int cmd_type)
{
- ctlr_info_t *h = hba[ctlr];
u64bit buff_dma_handle;
int status = IO_OK;
@@ -2580,7 +2576,8 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
break;
default:
printk(KERN_WARNING
- "cciss%d: Unknown Command 0x%c\n", ctlr, cmd);
+ "cciss%d: Unknown Command 0x%c\n",
+ h->ctlr, cmd);
return IO_ERROR;
}
} else if (cmd_type == TYPE_MSG) {
@@ -2613,12 +2610,13 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
break;
default:
printk(KERN_WARNING
- "cciss%d: unknown message type %d\n", ctlr, cmd);
+ "cciss%d: unknown message type %d\n",
+ h->ctlr, cmd);
return IO_ERROR;
}
} else {
printk(KERN_WARNING
- "cciss%d: unknown command type %d\n", ctlr, cmd_type);
+ "cciss%d: unknown command type %d\n", h->ctlr, cmd_type);
return IO_ERROR;
}
/* Fill in the scatter gather information */
@@ -2760,18 +2758,17 @@ static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
return return_status;
}
-static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
+static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
__u8 page_code, unsigned char scsi3addr[],
int cmd_type)
{
- ctlr_info_t *h = hba[ctlr];
CommandList_struct *c;
int return_status;
c = cmd_alloc(h, 0);
if (!c)
return -ENOMEM;
- return_status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
+ return_status = fill_cmd(h, c, cmd, buff, size, page_code,
scsi3addr, cmd_type);
if (return_status == IO_OK)
return_status = sendcmd_withirq_core(h, c, 1);
@@ -2780,7 +2777,7 @@ static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
return return_status;
}
-static void cciss_geometry_inquiry(int ctlr, int logvol,
+static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
sector_t total_size,
unsigned int block_size,
InquiryData_struct *inq_buff,
@@ -2791,8 +2788,8 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
unsigned char scsi3addr[8];
memset(inq_buff, 0, sizeof(InquiryData_struct));
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buff,
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff,
sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
if (inq_buff->data_byte[8] == 0xFF) {
@@ -2826,7 +2823,7 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
}
static void
-cciss_read_capacity(int ctlr, int logvol, sector_t *total_size,
+cciss_read_capacity(ctlr_info_t *h, int logvol, sector_t *total_size,
unsigned int *block_size)
{
ReadCapdata_struct *buf;
@@ -2839,8 +2836,8 @@ cciss_read_capacity(int ctlr, int logvol, sector_t *total_size,
return;
}
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- return_code = sendcmd_withirq(CCISS_READ_CAPACITY, ctlr, buf,
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY, buf,
sizeof(ReadCapdata_struct), 0, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
*total_size = be32_to_cpu(*(__be32 *) buf->total_size);
@@ -2853,7 +2850,7 @@ cciss_read_capacity(int ctlr, int logvol, sector_t *total_size,
kfree(buf);
}
-static void cciss_read_capacity_16(int ctlr, int logvol,
+static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
sector_t *total_size, unsigned int *block_size)
{
ReadCapdata_struct_16 *buf;
@@ -2866,9 +2863,9 @@ static void cciss_read_capacity_16(int ctlr, int logvol,
return;
}
- log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
- return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
- ctlr, buf, sizeof(ReadCapdata_struct_16),
+ log_unit_to_scsi3addr(h, scsi3addr, logvol);
+ return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY_16,
+ buf, sizeof(ReadCapdata_struct_16),
0, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
*total_size = be64_to_cpu(*(__be64 *) buf->total_size);
@@ -2910,13 +2907,13 @@ static int cciss_revalidate(struct gendisk *disk)
return 1;
}
if (h->cciss_read == CCISS_READ_10) {
- cciss_read_capacity(h->ctlr, logvol,
+ cciss_read_capacity(h, logvol,
&total_size, &block_size);
} else {
- cciss_read_capacity_16(h->ctlr, logvol,
+ cciss_read_capacity_16(h, logvol,
&total_size, &block_size);
}
- cciss_geometry_inquiry(h->ctlr, logvol, total_size, block_size,
+ cciss_geometry_inquiry(h, logvol, total_size, block_size,
inq_buff, drv);
blk_queue_logical_block_size(drv->queue, drv->block_size);
@@ -2966,7 +2963,7 @@ static void start_io(ctlr_info_t *h)
}
}
-/* Assumes that CCISS_LOCK(h->ctlr) is held. */
+/* Assumes that h->lock is held. */
/* Zeros out the error record and then resends the command back */
/* to the controller */
static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c)
@@ -3494,7 +3491,7 @@ static irqreturn_t do_cciss_intx(int irq, void *dev_id)
* If there are completed commands in the completion queue,
* we had better do something about it.
*/
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
while (interrupt_pending(h)) {
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY) {
@@ -3505,7 +3502,7 @@ static irqreturn_t do_cciss_intx(int irq, void *dev_id)
}
}
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return IRQ_HANDLED;
}
@@ -3524,7 +3521,7 @@ static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id)
* If there are completed commands in the completion queue,
* we had better do something about it.
*/
- spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY) {
if (cciss_tag_contains_index(raw_tag))
@@ -3533,7 +3530,7 @@ static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id)
raw_tag = process_nonindexed_cmd(h, raw_tag);
}
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
return IRQ_HANDLED;
}
@@ -3961,7 +3958,7 @@ static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
* controllers that are capable. If not, we use IO-APIC mode.
*/
-static void __devinit cciss_interrupt_mode(ctlr_info_t *c)
+static void __devinit cciss_interrupt_mode(ctlr_info_t *h)
{
#ifdef CONFIG_PCI_MSI
int err;
@@ -3970,18 +3967,18 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c)
};
/* Some boards advertise MSI but don't really support it */
- if ((c->board_id == 0x40700E11) || (c->board_id == 0x40800E11) ||
- (c->board_id == 0x40820E11) || (c->board_id == 0x40830E11))
+ if ((h->board_id == 0x40700E11) || (h->board_id == 0x40800E11) ||
+ (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
goto default_int_mode;
- if (pci_find_capability(c->pdev, PCI_CAP_ID_MSIX)) {
- err = pci_enable_msix(c->pdev, cciss_msix_entries, 4);
+ if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
+ err = pci_enable_msix(h->pdev, cciss_msix_entries, 4);
if (!err) {
- c->intr[0] = cciss_msix_entries[0].vector;
- c->intr[1] = cciss_msix_entries[1].vector;
- c->intr[2] = cciss_msix_entries[2].vector;
- c->intr[3] = cciss_msix_entries[3].vector;
- c->msix_vector = 1;
+ h->intr[0] = cciss_msix_entries[0].vector;
+ h->intr[1] = cciss_msix_entries[1].vector;
+ h->intr[2] = cciss_msix_entries[2].vector;
+ h->intr[3] = cciss_msix_entries[3].vector;
+ h->msix_vector = 1;
return;
}
if (err > 0) {
@@ -3994,17 +3991,16 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c)
goto default_int_mode;
}
}
- if (pci_find_capability(c->pdev, PCI_CAP_ID_MSI)) {
- if (!pci_enable_msi(c->pdev)) {
- c->msi_vector = 1;
- } else {
+ if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
+ if (!pci_enable_msi(h->pdev))
+ h->msi_vector = 1;
+ else
printk(KERN_WARNING "cciss: MSI init failed\n");
- }
}
default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
- c->intr[PERF_MODE_INT] = c->pdev->irq;
+ h->intr[PERF_MODE_INT] = h->pdev->irq;
return;
}
@@ -4190,28 +4186,28 @@ static inline void cciss_p600_dma_prefetch_quirk(ctlr_info_t *h)
pci_write_config_dword(h->pdev, PCI_COMMAND_PARITY, dma_refetch);
}
-static int __devinit cciss_pci_init(ctlr_info_t *c)
+static int __devinit cciss_pci_init(ctlr_info_t *h)
{
int prod_index, err;
- prod_index = cciss_lookup_board_id(c->pdev, &c->board_id);
+ prod_index = cciss_lookup_board_id(h->pdev, &h->board_id);
if (prod_index < 0)
return -ENODEV;
- c->product_name = products[prod_index].product_name;
- c->access = *(products[prod_index].access);
+ h->product_name = products[prod_index].product_name;
+ h->access = *(products[prod_index].access);
- if (cciss_board_disabled(c)) {
+ if (cciss_board_disabled(h)) {
printk(KERN_WARNING
"cciss: controller appears to be disabled\n");
return -ENODEV;
}
- err = pci_enable_device(c->pdev);
+ err = pci_enable_device(h->pdev);
if (err) {
printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
return err;
}
- err = pci_request_regions(c->pdev, "cciss");
+ err = pci_request_regions(h->pdev, "cciss");
if (err) {
printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
"aborting\n");
@@ -4220,38 +4216,38 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
#ifdef CCISS_DEBUG
printk(KERN_INFO "command = %x\n", command);
- printk(KERN_INFO "irq = %x\n", c->pdev->irq);
- printk(KERN_INFO "board_id = %x\n", c->board_id);
+ printk(KERN_INFO "irq = %x\n", h->pdev->irq);
+ printk(KERN_INFO "board_id = %x\n", h->board_id);
#endif /* CCISS_DEBUG */
/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
* else we use the IO-APIC interrupt assigned to us by system ROM.
*/
- cciss_interrupt_mode(c);
- err = cciss_pci_find_memory_BAR(c->pdev, &c->paddr);
+ cciss_interrupt_mode(h);
+ err = cciss_pci_find_memory_BAR(h->pdev, &h->paddr);
if (err)
goto err_out_free_res;
- c->vaddr = remap_pci_mem(c->paddr, 0x250);
- if (!c->vaddr) {
+ h->vaddr = remap_pci_mem(h->paddr, 0x250);
+ if (!h->vaddr) {
err = -ENOMEM;
goto err_out_free_res;
}
- err = cciss_wait_for_board_ready(c);
+ err = cciss_wait_for_board_ready(h);
if (err)
goto err_out_free_res;
- err = cciss_find_cfgtables(c);
+ err = cciss_find_cfgtables(h);
if (err)
goto err_out_free_res;
- print_cfg_table(c->cfgtable);
- cciss_find_board_params(c);
+ print_cfg_table(h->cfgtable);
+ cciss_find_board_params(h);
- if (!CISS_signature_present(c)) {
+ if (!CISS_signature_present(h)) {
err = -ENODEV;
goto err_out_free_res;
}
- cciss_enable_scsi_prefetch(c);
- cciss_p600_dma_prefetch_quirk(c);
- cciss_put_controller_into_performant_mode(c);
+ cciss_enable_scsi_prefetch(h);
+ cciss_p600_dma_prefetch_quirk(h);
+ cciss_put_controller_into_performant_mode(h);
return 0;
err_out_free_res:
@@ -4259,13 +4255,13 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
- if (c->transtable)
- iounmap(c->transtable);
- if (c->cfgtable)
- iounmap(c->cfgtable);
- if (c->vaddr)
- iounmap(c->vaddr);
- pci_release_regions(c->pdev);
+ if (h->transtable)
+ iounmap(h->transtable);
+ if (h->cfgtable)
+ iounmap(h->cfgtable);
+ if (h->vaddr)
+ iounmap(h->vaddr);
+ pci_release_regions(h->pdev);
return err;
}
@@ -4278,12 +4274,12 @@ static int alloc_cciss_hba(void)
for (i = 0; i < MAX_CTLR; i++) {
if (!hba[i]) {
- ctlr_info_t *p;
+ ctlr_info_t *h;
- p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
- if (!p)
+ h = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
+ if (!h)
goto Enomem;
- hba[i] = p;
+ hba[i] = h;
return i;
}
}
@@ -4295,12 +4291,11 @@ static int alloc_cciss_hba(void)
return -1;
}
-static void free_hba(int n)
+static void free_hba(ctlr_info_t *h)
{
- ctlr_info_t *h = hba[n];
int i;
- hba[n] = NULL;
+ hba[h->ctlr] = NULL;
for (i = 0; i < h->highest_lun + 1; i++)
if (h->gendisk[i] != NULL)
put_disk(h->gendisk[i]);
@@ -4651,6 +4646,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
int rc;
int dac, return_code;
InquiryData_struct *inq_buff;
+ ctlr_info_t *h;
rc = cciss_init_reset_devices(pdev);
if (rc)
@@ -4659,21 +4655,22 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
if (i < 0)
return -1;
- hba[i]->pdev = pdev;
- hba[i]->busy_initializing = 1;
- INIT_HLIST_HEAD(&hba[i]->cmpQ);
- INIT_HLIST_HEAD(&hba[i]->reqQ);
- mutex_init(&hba[i]->busy_shutting_down);
+ h = hba[i];
+ h->pdev = pdev;
+ h->busy_initializing = 1;
+ INIT_HLIST_HEAD(&h->cmpQ);
+ INIT_HLIST_HEAD(&h->reqQ);
+ mutex_init(&h->busy_shutting_down);
- if (cciss_pci_init(hba[i]) != 0)
+ if (cciss_pci_init(h) != 0)
goto clean_no_release_regions;
- sprintf(hba[i]->devname, "cciss%d", i);
- hba[i]->ctlr = i;
+ sprintf(h->devname, "cciss%d", i);
+ h->ctlr = i;
- init_completion(&hba[i]->scan_wait);
+ init_completion(&h->scan_wait);
- if (cciss_create_hba_sysfs_entry(hba[i]))
+ if (cciss_create_hba_sysfs_entry(h))
goto clean0;
/* configure PCI DMA stuff */
@@ -4692,100 +4689,100 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
* 8 controller support.
*/
if (i < MAX_CTLR_ORIG)
- hba[i]->major = COMPAQ_CISS_MAJOR + i;
- rc = register_blkdev(hba[i]->major, hba[i]->devname);
+ h->major = COMPAQ_CISS_MAJOR + i;
+ rc = register_blkdev(h->major, h->devname);
if (rc == -EBUSY || rc == -EINVAL) {
printk(KERN_ERR
"cciss: Unable to get major number %d for %s "
- "on hba %d\n", hba[i]->major, hba[i]->devname, i);
+ "on hba %d\n", h->major, h->devname, i);
goto clean1;
} else {
if (i >= MAX_CTLR_ORIG)
- hba[i]->major = rc;
+ h->major = rc;
}
/* make sure the board interrupts are off */
- hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
- if (hba[i]->msi_vector || hba[i]->msix_vector) {
- if (request_irq(hba[i]->intr[PERF_MODE_INT],
+ h->access.set_intr_mask(h, CCISS_INTR_OFF);
+ if (h->msi_vector || h->msix_vector) {
+ if (request_irq(h->intr[PERF_MODE_INT],
do_cciss_msix_intr,
- IRQF_DISABLED, hba[i]->devname, hba[i])) {
+ IRQF_DISABLED, h->devname, h)) {
printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
- hba[i]->intr[PERF_MODE_INT], hba[i]->devname);
+ h->intr[PERF_MODE_INT], h->devname);
goto clean2;
}
} else {
- if (request_irq(hba[i]->intr[PERF_MODE_INT], do_cciss_intx,
- IRQF_DISABLED, hba[i]->devname, hba[i])) {
+ if (request_irq(h->intr[PERF_MODE_INT], do_cciss_intx,
+ IRQF_DISABLED, h->devname, h)) {
printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
- hba[i]->intr[PERF_MODE_INT], hba[i]->devname);
+ h->intr[PERF_MODE_INT], h->devname);
goto clean2;
}
}
printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
- hba[i]->devname, pdev->device, pci_name(pdev),
- hba[i]->intr[PERF_MODE_INT], dac ? "" : " not");
+ h->devname, pdev->device, pci_name(pdev),
+ h->intr[PERF_MODE_INT], dac ? "" : " not");
- hba[i]->cmd_pool_bits =
- kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+ h->cmd_pool_bits =
+ kmalloc(DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG)
* sizeof(unsigned long), GFP_KERNEL);
- hba[i]->cmd_pool = (CommandList_struct *)
- pci_alloc_consistent(hba[i]->pdev,
- hba[i]->nr_cmds * sizeof(CommandList_struct),
- &(hba[i]->cmd_pool_dhandle));
- hba[i]->errinfo_pool = (ErrorInfo_struct *)
- pci_alloc_consistent(hba[i]->pdev,
- hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
- &(hba[i]->errinfo_pool_dhandle));
- if ((hba[i]->cmd_pool_bits == NULL)
- || (hba[i]->cmd_pool == NULL)
- || (hba[i]->errinfo_pool == NULL)) {
+ h->cmd_pool = (CommandList_struct *)
+ pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(CommandList_struct),
+ &(h->cmd_pool_dhandle));
+ h->errinfo_pool = (ErrorInfo_struct *)
+ pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(ErrorInfo_struct),
+ &(h->errinfo_pool_dhandle));
+ if ((h->cmd_pool_bits == NULL)
+ || (h->cmd_pool == NULL)
+ || (h->errinfo_pool == NULL)) {
printk(KERN_ERR "cciss: out of memory");
goto clean4;
}
/* Need space for temp scatter list */
- hba[i]->scatter_list = kmalloc(hba[i]->max_commands *
+ h->scatter_list = kmalloc(h->max_commands *
sizeof(struct scatterlist *),
GFP_KERNEL);
- for (k = 0; k < hba[i]->nr_cmds; k++) {
- hba[i]->scatter_list[k] = kmalloc(sizeof(struct scatterlist) *
- hba[i]->maxsgentries,
+ for (k = 0; k < h->nr_cmds; k++) {
+ h->scatter_list[k] = kmalloc(sizeof(struct scatterlist) *
+ h->maxsgentries,
GFP_KERNEL);
- if (hba[i]->scatter_list[k] == NULL) {
+ if (h->scatter_list[k] == NULL) {
printk(KERN_ERR "cciss%d: could not allocate "
"s/g lists\n", i);
goto clean4;
}
}
- hba[i]->cmd_sg_list = cciss_allocate_sg_chain_blocks(hba[i],
- hba[i]->chainsize, hba[i]->nr_cmds);
- if (!hba[i]->cmd_sg_list && hba[i]->chainsize > 0)
+ h->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
+ h->chainsize, h->nr_cmds);
+ if (!h->cmd_sg_list && h->chainsize > 0)
goto clean4;
- spin_lock_init(&hba[i]->lock);
+ spin_lock_init(&h->lock);
/* Initialize the pdev driver private data.
- have it point to hba[i]. */
- pci_set_drvdata(pdev, hba[i]);
+ have it point to h. */
+ pci_set_drvdata(pdev, h);
/* command and error info recs zeroed out before
they are used */
- memset(hba[i]->cmd_pool_bits, 0,
- DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+ memset(h->cmd_pool_bits, 0,
+ DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG)
* sizeof(unsigned long));
- hba[i]->num_luns = 0;
- hba[i]->highest_lun = -1;
+ h->num_luns = 0;
+ h->highest_lun = -1;
for (j = 0; j < CISS_MAX_LUN; j++) {
- hba[i]->drv[j] = NULL;
- hba[i]->gendisk[j] = NULL;
+ h->drv[j] = NULL;
+ h->gendisk[j] = NULL;
}
- cciss_scsi_setup(i);
+ cciss_scsi_setup(h);
/* Turn the interrupts on so we can service requests */
- hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
+ h->access.set_intr_mask(h, CCISS_INTR_ON);
/* Get the firmware version */
inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
@@ -4794,59 +4791,59 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
goto clean4;
}
- return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
+ return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff,
sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD);
if (return_code == IO_OK) {
- hba[i]->firm_ver[0] = inq_buff->data_byte[32];
- hba[i]->firm_ver[1] = inq_buff->data_byte[33];
- hba[i]->firm_ver[2] = inq_buff->data_byte[34];
- hba[i]->firm_ver[3] = inq_buff->data_byte[35];
+ h->firm_ver[0] = inq_buff->data_byte[32];
+ h->firm_ver[1] = inq_buff->data_byte[33];
+ h->firm_ver[2] = inq_buff->data_byte[34];
+ h->firm_ver[3] = inq_buff->data_byte[35];
} else { /* send command failed */
printk(KERN_WARNING "cciss: unable to determine firmware"
" version of controller\n");
}
kfree(inq_buff);
- cciss_procinit(i);
+ cciss_procinit(h);
- hba[i]->cciss_max_sectors = 8192;
+ h->cciss_max_sectors = 8192;
- rebuild_lun_table(hba[i], 1, 0);
- hba[i]->busy_initializing = 0;
+ rebuild_lun_table(h, 1, 0);
+ h->busy_initializing = 0;
return 1;
clean4:
- kfree(hba[i]->cmd_pool_bits);
+ kfree(h->cmd_pool_bits);
/* Free up sg elements */
- for (k = 0; k < hba[i]->nr_cmds; k++)
- kfree(hba[i]->scatter_list[k]);
- kfree(hba[i]->scatter_list);
- cciss_free_sg_chain_blocks(hba[i]->cmd_sg_list, hba[i]->nr_cmds);
- if (hba[i]->cmd_pool)
- pci_free_consistent(hba[i]->pdev,
- hba[i]->nr_cmds * sizeof(CommandList_struct),
- hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
- if (hba[i]->errinfo_pool)
- pci_free_consistent(hba[i]->pdev,
- hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
- hba[i]->errinfo_pool,
- hba[i]->errinfo_pool_dhandle);
- free_irq(hba[i]->intr[PERF_MODE_INT], hba[i]);
+ for (k = 0; k < h->nr_cmds; k++)
+ kfree(h->scatter_list[k]);
+ kfree(h->scatter_list);
+ cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
+ if (h->cmd_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(CommandList_struct),
+ h->cmd_pool, h->cmd_pool_dhandle);
+ if (h->errinfo_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(ErrorInfo_struct),
+ h->errinfo_pool,
+ h->errinfo_pool_dhandle);
+ free_irq(h->intr[PERF_MODE_INT], h);
clean2:
- unregister_blkdev(hba[i]->major, hba[i]->devname);
+ unregister_blkdev(h->major, h->devname);
clean1:
- cciss_destroy_hba_sysfs_entry(hba[i]);
+ cciss_destroy_hba_sysfs_entry(h);
clean0:
pci_release_regions(pdev);
clean_no_release_regions:
- hba[i]->busy_initializing = 0;
+ h->busy_initializing = 0;
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
pci_set_drvdata(pdev, NULL);
- free_hba(i);
+ free_hba(h);
return -1;
}
@@ -4866,7 +4863,7 @@ static void cciss_shutdown(struct pci_dev *pdev)
}
/* write all data in the battery backed cache to disk */
memset(flush_buf, 0, 4);
- return_code = sendcmd_withirq(CCISS_CACHE_FLUSH, h->ctlr, flush_buf,
+ return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf,
4, 0, CTLR_LUNID, TYPE_CMD);
kfree(flush_buf);
if (return_code != IO_OK)
@@ -4878,7 +4875,7 @@ static void cciss_shutdown(struct pci_dev *pdev)
static void __devexit cciss_remove_one(struct pci_dev *pdev)
{
- ctlr_info_t *tmp_ptr;
+ ctlr_info_t *h;
int i, j;
if (pci_get_drvdata(pdev) == NULL) {
@@ -4886,28 +4883,28 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
return;
}
- tmp_ptr = pci_get_drvdata(pdev);
- i = tmp_ptr->ctlr;
+ h = pci_get_drvdata(pdev);
+ i = h->ctlr;
if (hba[i] == NULL) {
printk(KERN_ERR "cciss: device appears to "
- "already be removed \n");
+ "already be removed\n");
return;
}
- mutex_lock(&hba[i]->busy_shutting_down);
+ mutex_lock(&h->busy_shutting_down);
- remove_from_scan_list(hba[i]);
- remove_proc_entry(hba[i]->devname, proc_cciss);
- unregister_blkdev(hba[i]->major, hba[i]->devname);
+ remove_from_scan_list(h);
+ remove_proc_entry(h->devname, proc_cciss);
+ unregister_blkdev(h->major, h->devname);
/* remove it from the disk list */
for (j = 0; j < CISS_MAX_LUN; j++) {
- struct gendisk *disk = hba[i]->gendisk[j];
+ struct gendisk *disk = h->gendisk[j];
if (disk) {
struct request_queue *q = disk->queue;
if (disk->flags & GENHD_FL_UP) {
- cciss_destroy_ld_sysfs_entry(hba[i], j, 1);
+ cciss_destroy_ld_sysfs_entry(h, j, 1);
del_gendisk(disk);
}
if (q)
@@ -4916,41 +4913,41 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
}
#ifdef CONFIG_CISS_SCSI_TAPE
- cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
+ cciss_unregister_scsi(h); /* unhook from SCSI subsystem */
#endif
cciss_shutdown(pdev);
#ifdef CONFIG_PCI_MSI
- if (hba[i]->msix_vector)
- pci_disable_msix(hba[i]->pdev);
- else if (hba[i]->msi_vector)
- pci_disable_msi(hba[i]->pdev);
+ if (h->msix_vector)
+ pci_disable_msix(h->pdev);
+ else if (h->msi_vector)
+ pci_disable_msi(h->pdev);
#endif /* CONFIG_PCI_MSI */
- iounmap(hba[i]->transtable);
- iounmap(hba[i]->cfgtable);
- iounmap(hba[i]->vaddr);
+ iounmap(h->transtable);
+ iounmap(h->cfgtable);
+ iounmap(h->vaddr);
- pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
- hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
- pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
- hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
- kfree(hba[i]->cmd_pool_bits);
+ pci_free_consistent(h->pdev, h->nr_cmds * sizeof(CommandList_struct),
+ h->cmd_pool, h->cmd_pool_dhandle);
+ pci_free_consistent(h->pdev, h->nr_cmds * sizeof(ErrorInfo_struct),
+ h->errinfo_pool, h->errinfo_pool_dhandle);
+ kfree(h->cmd_pool_bits);
/* Free up sg elements */
- for (j = 0; j < hba[i]->nr_cmds; j++)
- kfree(hba[i]->scatter_list[j]);
- kfree(hba[i]->scatter_list);
- cciss_free_sg_chain_blocks(hba[i]->cmd_sg_list, hba[i]->nr_cmds);
+ for (j = 0; j < h->nr_cmds; j++)
+ kfree(h->scatter_list[j]);
+ kfree(h->scatter_list);
+ cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
- cciss_destroy_hba_sysfs_entry(hba[i]);
- mutex_unlock(&hba[i]->busy_shutting_down);
- free_hba(i);
+ cciss_destroy_hba_sysfs_entry(h);
+ mutex_unlock(&h->busy_shutting_down);
+ free_hba(h);
}
static struct pci_driver cciss_pci_driver = {
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 4290b7f0f6394..ae340ffc8f815 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -419,6 +419,4 @@ struct board_type {
int nr_cmds; /* Max cmds this kind of ctlr can handle. */
};
-#define CCISS_LOCK(i) (&hba[i]->lock)
-
#endif /* CCISS_H */
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 3604b72f2af90..9133ad4c7b1b7 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -44,7 +44,7 @@
#define CCISS_ABORT_MSG 0x00
#define CCISS_RESET_MSG 0x01
-static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
size_t size,
__u8 page_code, unsigned char *scsi3addr,
int cmd_type);
@@ -127,16 +127,16 @@ struct cciss_scsi_adapter_data_t {
spinlock_t lock; // to protect ccissscsi[ctlr];
};
-#define CPQ_TAPE_LOCK(ctlr, flags) spin_lock_irqsave( \
- &hba[ctlr]->scsi_ctlr->lock, flags);
-#define CPQ_TAPE_UNLOCK(ctlr, flags) spin_unlock_irqrestore( \
- &hba[ctlr]->scsi_ctlr->lock, flags);
+#define CPQ_TAPE_LOCK(h, flags) spin_lock_irqsave( \
+ &h->scsi_ctlr->lock, flags);
+#define CPQ_TAPE_UNLOCK(h, flags) spin_unlock_irqrestore( \
+ &h->scsi_ctlr->lock, flags);
static CommandList_struct *
scsi_cmd_alloc(ctlr_info_t *h)
{
/* assume only one process in here at a time, locking done by caller. */
- /* use CCISS_LOCK(ctlr) */
+ /* use h->lock */
/* might be better to rewrite how we allocate scsi commands in a way that */
/* needs no locking at all. */
@@ -177,10 +177,10 @@ scsi_cmd_alloc(ctlr_info_t *h)
}
static void
-scsi_cmd_free(ctlr_info_t *h, CommandList_struct *cmd)
+scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
{
/* assume only one process in here at a time, locking done by caller. */
- /* use CCISS_LOCK(ctlr) */
+ /* use h->lock */
/* drop the free memory chunk on top of the stack. */
struct cciss_scsi_adapter_data_t *sa;
@@ -193,19 +193,19 @@ scsi_cmd_free(ctlr_info_t *h, CommandList_struct *cmd)
printk("cciss: scsi_cmd_free called too many times.\n");
BUG();
}
- stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) cmd;
+ stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) c;
}
static int
-scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa)
+scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa)
{
int i;
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
- sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(hba[ctlr],
- hba[ctlr]->chainsize, CMD_STACK_SIZE);
- if (!sa->cmd_sg_list && hba[ctlr]->chainsize > 0)
+ sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
+ h->chainsize, CMD_STACK_SIZE);
+ if (!sa->cmd_sg_list && h->chainsize > 0)
return -ENOMEM;
stk = &sa->cmd_stack;
@@ -215,7 +215,7 @@ scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa)
BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
/* pci_alloc_consistent guarantees 32-bit DMA address will be used */
stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
- pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle);
+ pci_alloc_consistent(h->pdev, size, &stk->cmd_pool_handle);
if (stk->pool == NULL) {
cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
@@ -234,13 +234,13 @@ scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa)
}
static void
-scsi_cmd_stack_free(int ctlr)
+scsi_cmd_stack_free(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
- sa = hba[ctlr]->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top != CMD_STACK_SIZE-1) {
printk( "cciss: %d scsi commands are still outstanding.\n",
@@ -250,7 +250,7 @@ scsi_cmd_stack_free(int ctlr)
}
size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
- pci_free_consistent(hba[ctlr]->pdev, size, stk->pool, stk->cmd_pool_handle);
+ pci_free_consistent(h->pdev, size, stk->pool, stk->cmd_pool_handle);
stk->pool = NULL;
cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
}
@@ -342,20 +342,20 @@ print_cmd(CommandList_struct *cp)
#endif
static int
-find_bus_target_lun(int ctlr, int *bus, int *target, int *lun)
+find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun)
{
/* finds an unused bus, target, lun for a new device */
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
+ /* assumes h->scsi_ctlr->lock is held */
int i, found=0;
unsigned char target_taken[CCISS_MAX_SCSI_DEVS_PER_HBA];
memset(&target_taken[0], 0, CCISS_MAX_SCSI_DEVS_PER_HBA);
target_taken[SELF_SCSI_ID] = 1;
- for (i=0;i<ccissscsi[ctlr].ndevices;i++)
- target_taken[ccissscsi[ctlr].dev[i].target] = 1;
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++)
+ target_taken[ccissscsi[h->ctlr].dev[i].target] = 1;
- for (i=0;i<CCISS_MAX_SCSI_DEVS_PER_HBA;i++) {
+ for (i = 0; i < CCISS_MAX_SCSI_DEVS_PER_HBA; i++) {
if (!target_taken[i]) {
*bus = 0; *target=i; *lun = 0; found=1;
break;
@@ -369,19 +369,19 @@ struct scsi2map {
};
static int
-cciss_scsi_add_entry(int ctlr, int hostno,
+cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
struct cciss_scsi_dev_t *device,
struct scsi2map *added, int *nadded)
{
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
- int n = ccissscsi[ctlr].ndevices;
+ /* assumes h->scsi_ctlr->lock is held */
+ int n = ccissscsi[h->ctlr].ndevices;
struct cciss_scsi_dev_t *sd;
int i, bus, target, lun;
unsigned char addr1[8], addr2[8];
if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
printk("cciss%d: Too many devices, "
- "some will be inaccessible.\n", ctlr);
+ "some will be inaccessible.\n", h->ctlr);
return -1;
}
@@ -397,7 +397,7 @@ cciss_scsi_add_entry(int ctlr, int hostno,
memcpy(addr1, device->scsi3addr, 8);
addr1[4] = 0;
for (i = 0; i < n; i++) {
- sd = &ccissscsi[ctlr].dev[i];
+ sd = &ccissscsi[h->ctlr].dev[i];
memcpy(addr2, sd->scsi3addr, 8);
addr2[4] = 0;
/* differ only in byte 4? */
@@ -410,9 +410,9 @@ cciss_scsi_add_entry(int ctlr, int hostno,
}
}
- sd = &ccissscsi[ctlr].dev[n];
+ sd = &ccissscsi[h->ctlr].dev[n];
if (lun == 0) {
- if (find_bus_target_lun(ctlr,
+ if (find_bus_target_lun(h,
&sd->bus, &sd->target, &sd->lun) != 0)
return -1;
} else {
@@ -431,37 +431,37 @@ cciss_scsi_add_entry(int ctlr, int hostno,
memcpy(sd->device_id, device->device_id, sizeof(sd->device_id));
sd->devtype = device->devtype;
- ccissscsi[ctlr].ndevices++;
+ ccissscsi[h->ctlr].ndevices++;
/* initially, (before registering with scsi layer) we don't
know our hostno and we don't want to print anything first
time anyway (the scsi layer's inquiries will show that info) */
if (hostno != -1)
printk("cciss%d: %s device c%db%dt%dl%d added.\n",
- ctlr, scsi_device_type(sd->devtype), hostno,
+ h->ctlr, scsi_device_type(sd->devtype), hostno,
sd->bus, sd->target, sd->lun);
return 0;
}
static void
-cciss_scsi_remove_entry(int ctlr, int hostno, int entry,
+cciss_scsi_remove_entry(ctlr_info_t *h, int hostno, int entry,
struct scsi2map *removed, int *nremoved)
{
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
+ /* assumes h->ctlr]->scsi_ctlr->lock is held */
int i;
struct cciss_scsi_dev_t sd;
if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
- sd = ccissscsi[ctlr].dev[entry];
+ sd = ccissscsi[h->ctlr].dev[entry];
removed[*nremoved].bus = sd.bus;
removed[*nremoved].target = sd.target;
removed[*nremoved].lun = sd.lun;
(*nremoved)++;
- for (i=entry;i<ccissscsi[ctlr].ndevices-1;i++)
- ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];
- ccissscsi[ctlr].ndevices--;
+ for (i = entry; i < ccissscsi[h->ctlr].ndevices-1; i++)
+ ccissscsi[h->ctlr].dev[i] = ccissscsi[h->ctlr].dev[i+1];
+ ccissscsi[h->ctlr].ndevices--;
printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, scsi_device_type(sd.devtype), hostno,
+ h->ctlr, scsi_device_type(sd.devtype), hostno,
sd.bus, sd.target, sd.lun);
}
@@ -476,24 +476,24 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry,
(a)[1] == (b)[1] && \
(a)[0] == (b)[0])
-static void fixup_botched_add(int ctlr, char *scsi3addr)
+static void fixup_botched_add(ctlr_info_t *h, char *scsi3addr)
{
/* called when scsi_add_device fails in order to re-adjust */
/* ccissscsi[] to match the mid layer's view. */
unsigned long flags;
int i, j;
- CPQ_TAPE_LOCK(ctlr, flags);
- for (i = 0; i < ccissscsi[ctlr].ndevices; i++) {
+ CPQ_TAPE_LOCK(h, flags);
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
if (memcmp(scsi3addr,
- ccissscsi[ctlr].dev[i].scsi3addr, 8) == 0) {
- for (j = i; j < ccissscsi[ctlr].ndevices-1; j++)
- ccissscsi[ctlr].dev[j] =
- ccissscsi[ctlr].dev[j+1];
- ccissscsi[ctlr].ndevices--;
+ ccissscsi[h->ctlr].dev[i].scsi3addr, 8) == 0) {
+ for (j = i; j < ccissscsi[h->ctlr].ndevices-1; j++)
+ ccissscsi[h->ctlr].dev[j] =
+ ccissscsi[h->ctlr].dev[j+1];
+ ccissscsi[h->ctlr].ndevices--;
break;
}
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
}
static int device_is_the_same(struct cciss_scsi_dev_t *dev1,
@@ -513,7 +513,7 @@ static int device_is_the_same(struct cciss_scsi_dev_t *dev1,
}
static int
-adjust_cciss_scsi_table(int ctlr, int hostno,
+adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
struct cciss_scsi_dev_t sd[], int nsds)
{
/* sd contains scsi3 addresses and devtypes, but
@@ -535,14 +535,14 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
if (!added || !removed) {
printk(KERN_WARNING "cciss%d: Out of memory in "
- "adjust_cciss_scsi_table\n", ctlr);
+ "adjust_cciss_scsi_table\n", h->ctlr);
goto free_and_out;
}
- CPQ_TAPE_LOCK(ctlr, flags);
+ CPQ_TAPE_LOCK(h, flags);
if (hostno != -1) /* if it's not the first time... */
- sh = hba[ctlr]->scsi_ctlr->scsi_host;
+ sh = h->scsi_ctlr->scsi_host;
/* find any devices in ccissscsi[] that are not in
sd[] and remove them from ccissscsi[] */
@@ -550,8 +550,8 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
i = 0;
nremoved = 0;
nadded = 0;
- while(i<ccissscsi[ctlr].ndevices) {
- csd = &ccissscsi[ctlr].dev[i];
+ while (i < ccissscsi[h->ctlr].ndevices) {
+ csd = &ccissscsi[h->ctlr].dev[i];
found=0;
for (j=0;j<nsds;j++) {
if (SCSI3ADDR_EQ(sd[j].scsi3addr,
@@ -567,19 +567,20 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
if (found == 0) { /* device no longer present. */
changes++;
/* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, scsi_device_type(csd->devtype), hostno,
+ h->ctlr, scsi_device_type(csd->devtype), hostno,
csd->bus, csd->target, csd->lun); */
- cciss_scsi_remove_entry(ctlr, hostno, i,
+ cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
/* remove ^^^, hence i not incremented */
} else if (found == 1) { /* device is different in some way */
changes++;
printk("cciss%d: device c%db%dt%dl%d has changed.\n",
- ctlr, hostno, csd->bus, csd->target, csd->lun);
- cciss_scsi_remove_entry(ctlr, hostno, i,
+ h->ctlr, hostno,
+ csd->bus, csd->target, csd->lun);
+ cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
/* remove ^^^, hence i not incremented */
- if (cciss_scsi_add_entry(ctlr, hostno, &sd[j],
+ if (cciss_scsi_add_entry(h, hostno, &sd[j],
added, &nadded) != 0)
/* we just removed one, so add can't fail. */
BUG();
@@ -601,8 +602,8 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
for (i=0;i<nsds;i++) {
found=0;
- for (j=0;j<ccissscsi[ctlr].ndevices;j++) {
- csd = &ccissscsi[ctlr].dev[j];
+ for (j = 0; j < ccissscsi[h->ctlr].ndevices; j++) {
+ csd = &ccissscsi[h->ctlr].dev[j];
if (SCSI3ADDR_EQ(sd[i].scsi3addr,
csd->scsi3addr)) {
if (device_is_the_same(&sd[i], csd))
@@ -614,18 +615,18 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
}
if (!found) {
changes++;
- if (cciss_scsi_add_entry(ctlr, hostno, &sd[i],
+ if (cciss_scsi_add_entry(h, hostno, &sd[i],
added, &nadded) != 0)
break;
} else if (found == 1) {
/* should never happen... */
changes++;
printk(KERN_WARNING "cciss%d: device "
- "unexpectedly changed\n", ctlr);
+ "unexpectedly changed\n", h->ctlr);
/* but if it does happen, we just ignore that device */
}
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
/* Don't notify scsi mid layer of any changes the first time through */
/* (or if there are no changes) scsi_scan_host will do it later the */
@@ -647,7 +648,7 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
/* timeout as if the device was gone. */
printk(KERN_WARNING "cciss%d: didn't find "
"c%db%dt%dl%d\n for removal.",
- ctlr, hostno, removed[i].bus,
+ h->ctlr, hostno, removed[i].bus,
removed[i].target, removed[i].lun);
}
}
@@ -661,11 +662,11 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
continue;
printk(KERN_WARNING "cciss%d: scsi_add_device "
"c%db%dt%dl%d failed, device not added.\n",
- ctlr, hostno,
+ h->ctlr, hostno,
added[i].bus, added[i].target, added[i].lun);
/* now we have to remove it from ccissscsi, */
/* since it didn't get added to scsi mid layer */
- fixup_botched_add(ctlr, added[i].scsi3addr);
+ fixup_botched_add(h, added[i].scsi3addr);
}
free_and_out:
@@ -675,33 +676,33 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
}
static int
-lookup_scsi3addr(int ctlr, int bus, int target, int lun, char *scsi3addr)
+lookup_scsi3addr(ctlr_info_t *h, int bus, int target, int lun, char *scsi3addr)
{
int i;
struct cciss_scsi_dev_t *sd;
unsigned long flags;
- CPQ_TAPE_LOCK(ctlr, flags);
- for (i=0;i<ccissscsi[ctlr].ndevices;i++) {
- sd = &ccissscsi[ctlr].dev[i];
+ CPQ_TAPE_LOCK(h, flags);
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
+ sd = &ccissscsi[h->ctlr].dev[i];
if (sd->bus == bus &&
sd->target == target &&
sd->lun == lun) {
memcpy(scsi3addr, &sd->scsi3addr[0], 8);
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
return 0;
}
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
return -1;
}
static void
-cciss_scsi_setup(int cntl_num)
+cciss_scsi_setup(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t * shba;
- ccissscsi[cntl_num].ndevices = 0;
+ ccissscsi[h->ctlr].ndevices = 0;
shba = (struct cciss_scsi_adapter_data_t *)
kmalloc(sizeof(*shba), GFP_KERNEL);
if (shba == NULL)
@@ -709,35 +710,35 @@ cciss_scsi_setup(int cntl_num)
shba->scsi_host = NULL;
spin_lock_init(&shba->lock);
shba->registered = 0;
- if (scsi_cmd_stack_setup(cntl_num, shba) != 0) {
+ if (scsi_cmd_stack_setup(h, shba) != 0) {
kfree(shba);
shba = NULL;
}
- hba[cntl_num]->scsi_ctlr = shba;
+ h->scsi_ctlr = shba;
return;
}
-static void
-complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
+static void complete_scsi_command(CommandList_struct *c, int timeout,
+ __u32 tag)
{
struct scsi_cmnd *cmd;
- ctlr_info_t *ctlr;
+ ctlr_info_t *h;
ErrorInfo_struct *ei;
- ei = cp->err_info;
+ ei = c->err_info;
/* First, see if it was a message rather than a command */
- if (cp->Request.Type.Type == TYPE_MSG) {
- cp->cmd_type = CMD_MSG_DONE;
+ if (c->Request.Type.Type == TYPE_MSG) {
+ c->cmd_type = CMD_MSG_DONE;
return;
}
- cmd = (struct scsi_cmnd *) cp->scsi_cmd;
- ctlr = hba[cp->ctlr];
+ cmd = (struct scsi_cmnd *) c->scsi_cmd;
+ h = hba[c->ctlr];
scsi_dma_unmap(cmd);
- if (cp->Header.SGTotal > ctlr->max_cmd_sgentries)
- cciss_unmap_sg_chain_block(ctlr, cp);
+ if (c->Header.SGTotal > h->max_cmd_sgentries)
+ cciss_unmap_sg_chain_block(h, c);
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
@@ -764,9 +765,8 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
{
#if 0
printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- cp,
- ei->ScsiStatus);
+ "has SCSI Status = %x\n",
+ c, ei->ScsiStatus);
#endif
cmd->result |= (ei->ScsiStatus << 1);
}
@@ -786,13 +786,13 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: cp %p has"
+ printk(KERN_WARNING "cciss: %p has"
" completed with data overrun "
- "reported\n", cp);
+ "reported\n", c);
break;
case CMD_INVALID: {
- /* print_bytes(cp, sizeof(*cp), 1, 0);
- print_cmd(cp); */
+ /* print_bytes(c, sizeof(*c), 1, 0);
+ print_cmd(c); */
/* We get CMD_INVALID if you address a non-existent tape drive instead
of a selection timeout (no response). You will see this if you yank
out a tape drive, then try to access it. This is kind of a shame
@@ -802,54 +802,52 @@ complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cp %p has "
- "protocol error \n", cp);
+ printk(KERN_WARNING "cciss: %p has "
+ "protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p had "
- " hardware error\n", cp);
+ printk(KERN_WARNING "cciss: %p had "
+ " hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p had "
- "connection lost\n", cp);
+ printk(KERN_WARNING "cciss: %p had "
+ "connection lost\n", c);
break;
case CMD_ABORTED:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: cp %p was "
- "aborted\n", cp);
+ printk(KERN_WARNING "cciss: %p was "
+ "aborted\n", c);
break;
case CMD_ABORT_FAILED:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p reports "
- "abort failed\n", cp);
+ printk(KERN_WARNING "cciss: %p reports "
+ "abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: cp %p aborted "
- "do to an unsolicited abort\n", cp);
+ printk(KERN_WARNING "cciss: %p aborted "
+ "do to an unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
cmd->result = DID_TIME_OUT << 16;
- printk(KERN_WARNING "cciss: cp %p timedout\n",
- cp);
+ printk(KERN_WARNING "cciss: %p timedout\n",
+ c);
break;
default:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p returned "
- "unknown status %x\n", cp,
+ printk(KERN_WARNING "cciss: %p returned "
+ "unknown status %x\n", c,
ei->CommandStatus);
}
}
- // printk("c:%p:c%db%dt%dl%d ", cmd, ctlr->ctlr, cmd->channel,
- // cmd->target, cmd->lun);
cmd->scsi_done(cmd);
- scsi_cmd_free(ctlr, cp);
+ scsi_cmd_free(h, c);
}
static int
-cciss_scsi_detect(int ctlr)
+cciss_scsi_detect(ctlr_info_t *h)
{
struct Scsi_Host *sh;
int error;
@@ -860,15 +858,15 @@ cciss_scsi_detect(int ctlr)
sh->io_port = 0; // good enough? FIXME,
sh->n_io_port = 0; // I don't think we use these two...
sh->this_id = SELF_SCSI_ID;
- sh->sg_tablesize = hba[ctlr]->maxsgentries;
+ sh->sg_tablesize = h->maxsgentries;
sh->max_cmd_len = MAX_COMMAND_SIZE;
((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->scsi_host = sh;
- sh->hostdata[0] = (unsigned long) hba[ctlr];
- sh->irq = hba[ctlr]->intr[SIMPLE_MODE_INT];
+ h->scsi_ctlr)->scsi_host = sh;
+ sh->hostdata[0] = (unsigned long) h;
+ sh->irq = h->intr[SIMPLE_MODE_INT];
sh->unique_id = sh->irq;
- error = scsi_add_host(sh, &hba[ctlr]->pdev->dev);
+ error = scsi_add_host(sh, &h->pdev->dev);
if (error)
goto fail_host_put;
scsi_scan_host(sh);
@@ -882,20 +880,20 @@ cciss_scsi_detect(int ctlr)
static void
cciss_unmap_one(struct pci_dev *pdev,
- CommandList_struct *cp,
+ CommandList_struct *c,
size_t buflen,
int data_direction)
{
u64bit addr64;
- addr64.val32.lower = cp->SG[0].Addr.lower;
- addr64.val32.upper = cp->SG[0].Addr.upper;
+ addr64.val32.lower = c->SG[0].Addr.lower;
+ addr64.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single(pdev, (dma_addr_t) addr64.val, buflen, data_direction);
}
static void
cciss_map_one(struct pci_dev *pdev,
- CommandList_struct *cp,
+ CommandList_struct *c,
unsigned char *buf,
size_t buflen,
int data_direction)
@@ -903,18 +901,18 @@ cciss_map_one(struct pci_dev *pdev,
__u64 addr64;
addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction);
- cp->SG[0].Addr.lower =
+ c->SG[0].Addr.lower =
(__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Addr.upper =
+ c->SG[0].Addr.upper =
(__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Len = buflen;
- cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
+ c->SG[0].Len = buflen;
+ c->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
+ c->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
}
static int
-cciss_scsi_do_simple_cmd(ctlr_info_t *c,
- CommandList_struct *cp,
+cciss_scsi_do_simple_cmd(ctlr_info_t *h,
+ CommandList_struct *c,
unsigned char *scsi3addr,
unsigned char *cdb,
unsigned char cdblen,
@@ -923,53 +921,52 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *c,
{
DECLARE_COMPLETION_ONSTACK(wait);
- cp->cmd_type = CMD_IOCTL_PEND; // treat this like an ioctl
- cp->scsi_cmd = NULL;
- cp->Header.ReplyQueue = 0; // unused in simple mode
- memcpy(&cp->Header.LUN, scsi3addr, sizeof(cp->Header.LUN));
- cp->Header.Tag.lower = cp->busaddr; // Use k. address of cmd as tag
+ c->cmd_type = CMD_IOCTL_PEND; /* treat this like an ioctl */
+ c->scsi_cmd = NULL;
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ memcpy(&c->Header.LUN, scsi3addr, sizeof(c->Header.LUN));
+ c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
// Fill in the request block...
/* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n",
scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3],
scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); */
- memset(cp->Request.CDB, 0, sizeof(cp->Request.CDB));
- memcpy(cp->Request.CDB, cdb, cdblen);
- cp->Request.Timeout = 0;
- cp->Request.CDBLen = cdblen;
- cp->Request.Type.Type = TYPE_CMD;
- cp->Request.Type.Attribute = ATTR_SIMPLE;
- cp->Request.Type.Direction = direction;
+ memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
+ memcpy(c->Request.CDB, cdb, cdblen);
+ c->Request.Timeout = 0;
+ c->Request.CDBLen = cdblen;
+ c->Request.Type.Type = TYPE_CMD;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = direction;
/* Fill in the SG list and do dma mapping */
- cciss_map_one(c->pdev, cp, (unsigned char *) buf,
+ cciss_map_one(h->pdev, c, (unsigned char *) buf,
bufsize, DMA_FROM_DEVICE);
- cp->waiting = &wait;
- enqueue_cmd_and_start_io(c, cp);
+ c->waiting = &wait;
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
/* undo the dma mapping */
- cciss_unmap_one(c->pdev, cp, bufsize, DMA_FROM_DEVICE);
+ cciss_unmap_one(h->pdev, c, bufsize, DMA_FROM_DEVICE);
return(0);
}
static void
-cciss_scsi_interpret_error(CommandList_struct *cp)
+cciss_scsi_interpret_error(CommandList_struct *c)
{
ErrorInfo_struct *ei;
- ei = cp->err_info;
+ ei = c->err_info;
switch(ei->CommandStatus)
{
case CMD_TARGET_STATUS:
printk(KERN_WARNING "cciss: cmd %p has "
- "completed with errors\n", cp);
+ "completed with errors\n", c);
printk(KERN_WARNING "cciss: cmd %p "
"has SCSI Status = %x\n",
- cp,
- ei->ScsiStatus);
+ c, ei->ScsiStatus);
if (ei->ScsiStatus == 0)
printk(KERN_WARNING
"cciss:SCSI status is abnormally zero. "
@@ -981,78 +978,75 @@ cciss_scsi_interpret_error(CommandList_struct *cp)
printk("UNDERRUN\n");
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: cp %p has"
+ printk(KERN_WARNING "cciss: %p has"
" completed with data overrun "
- "reported\n", cp);
+ "reported\n", c);
break;
case CMD_INVALID: {
/* controller unfortunately reports SCSI passthru's */
/* to non-existent targets as invalid commands. */
- printk(KERN_WARNING "cciss: cp %p is "
+ printk(KERN_WARNING "cciss: %p is "
"reported invalid (probably means "
- "target device no longer present)\n",
- cp);
- /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0);
- print_cmd(cp); */
+ "target device no longer present)\n", c);
+ /* print_bytes((unsigned char *) c, sizeof(*c), 1, 0);
+ print_cmd(c); */
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cp %p has "
- "protocol error \n", cp);
+ printk(KERN_WARNING "cciss: %p has "
+ "protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
/* cmd->result = DID_ERROR << 16; */
- printk(KERN_WARNING "cciss: cp %p had "
- " hardware error\n", cp);
+ printk(KERN_WARNING "cciss: %p had "
+ " hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cp %p had "
- "connection lost\n", cp);
+ printk(KERN_WARNING "cciss: %p had "
+ "connection lost\n", c);
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cp %p was "
- "aborted\n", cp);
+ printk(KERN_WARNING "cciss: %p was "
+ "aborted\n", c);
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cp %p reports "
- "abort failed\n", cp);
+ printk(KERN_WARNING "cciss: %p reports "
+ "abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss: cp %p aborted "
- "do to an unsolicited abort\n", cp);
+ printk(KERN_WARNING "cciss: %p aborted "
+ "do to an unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: cp %p timedout\n",
- cp);
+ printk(KERN_WARNING "cciss: %p timedout\n", c);
break;
default:
- printk(KERN_WARNING "cciss: cp %p returned "
- "unknown status %x\n", cp,
- ei->CommandStatus);
+ printk(KERN_WARNING "cciss: %p returned "
+ "unknown status %x\n", c, ei->CommandStatus);
}
}
static int
-cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr,
+cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr,
unsigned char page, unsigned char *buf,
unsigned char bufsize)
{
int rc;
- CommandList_struct *cp;
+ CommandList_struct *c;
char cdb[6];
ErrorInfo_struct *ei;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- cp = scsi_cmd_alloc(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
- if (cp == NULL) { /* trouble... */
+ if (c == NULL) { /* trouble... */
printk("cmd_alloc returned NULL!\n");
return -1;
}
- ei = cp->err_info;
+ ei = c->err_info;
cdb[0] = CISS_INQUIRY;
cdb[1] = (page != 0);
@@ -1060,24 +1054,24 @@ cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr,
cdb[3] = 0;
cdb[4] = bufsize;
cdb[5] = 0;
- rc = cciss_scsi_do_simple_cmd(c, cp, scsi3addr, cdb,
+ rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr, cdb,
6, buf, bufsize, XFER_READ);
if (rc != 0) return rc; /* something went wrong */
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(cp);
+ cciss_scsi_interpret_error(c);
rc = -1;
}
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- scsi_cmd_free(c, cp);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ scsi_cmd_free(h, c);
+ spin_unlock_irqrestore(&h->lock, flags);
return rc;
}
/* Get the device id from inquiry page 0x83 */
-static int cciss_scsi_get_device_id(ctlr_info_t *c, unsigned char *scsi3addr,
+static int cciss_scsi_get_device_id(ctlr_info_t *h, unsigned char *scsi3addr,
unsigned char *device_id, int buflen)
{
int rc;
@@ -1088,7 +1082,7 @@ static int cciss_scsi_get_device_id(ctlr_info_t *c, unsigned char *scsi3addr,
buf = kzalloc(64, GFP_KERNEL);
if (!buf)
return -1;
- rc = cciss_scsi_do_inquiry(c, scsi3addr, 0x83, buf, 64);
+ rc = cciss_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64);
if (rc == 0)
memcpy(device_id, &buf[8], buflen);
kfree(buf);
@@ -1096,20 +1090,20 @@ static int cciss_scsi_get_device_id(ctlr_info_t *c, unsigned char *scsi3addr,
}
static int
-cciss_scsi_do_report_phys_luns(ctlr_info_t *c,
+cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
ReportLunData_struct *buf, int bufsize)
{
int rc;
- CommandList_struct *cp;
+ CommandList_struct *c;
unsigned char cdb[12];
unsigned char scsi3addr[8];
ErrorInfo_struct *ei;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- cp = scsi_cmd_alloc(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
- if (cp == NULL) { /* trouble... */
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (c == NULL) { /* trouble... */
printk("cmd_alloc returned NULL!\n");
return -1;
}
@@ -1128,27 +1122,27 @@ cciss_scsi_do_report_phys_luns(ctlr_info_t *c,
cdb[10] = 0;
cdb[11] = 0;
- rc = cciss_scsi_do_simple_cmd(c, cp, scsi3addr,
+ rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr,
cdb, 12,
(unsigned char *) buf,
bufsize, XFER_READ);
if (rc != 0) return rc; /* something went wrong */
- ei = cp->err_info;
+ ei = c->err_info;
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(cp);
+ cciss_scsi_interpret_error(c);
rc = -1;
}
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- scsi_cmd_free(c, cp);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ scsi_cmd_free(h, c);
+ spin_unlock_irqrestore(&h->lock, flags);
return rc;
}
static void
-cciss_update_non_disk_devices(int cntl_num, int hostno)
+cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
{
/* the idea here is we could get notified from /proc
that some devices have changed, so we do a report
@@ -1181,7 +1175,6 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
ReportLunData_struct *ld_buff;
unsigned char *inq_buff;
unsigned char scsi3addr[8];
- ctlr_info_t *c;
__u32 num_luns=0;
unsigned char *ch;
struct cciss_scsi_dev_t *currentsd, *this_device;
@@ -1189,7 +1182,6 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8;
int i;
- c = (ctlr_info_t *) hba[cntl_num];
ld_buff = kzalloc(reportlunsize, GFP_KERNEL);
inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
currentsd = kzalloc(sizeof(*currentsd) *
@@ -1199,7 +1191,7 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
goto out;
}
this_device = ¤tsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
- if (cciss_scsi_do_report_phys_luns(c, ld_buff, reportlunsize) == 0) {
+ if (cciss_scsi_do_report_phys_luns(h, ld_buff, reportlunsize) == 0) {
ch = &ld_buff->LUNListLength[0];
num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8;
if (num_luns > CISS_MAX_PHYS_LUN) {
@@ -1223,7 +1215,7 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8);
- if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, 0, inq_buff,
+ if (cciss_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
(unsigned char) OBDR_TAPE_INQ_SIZE) != 0)
/* Inquiry failed (msg printed already) */
continue; /* so we will skip this device. */
@@ -1241,7 +1233,7 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
sizeof(this_device->revision));
memset(this_device->device_id, 0,
sizeof(this_device->device_id));
- cciss_scsi_get_device_id(hba[cntl_num], scsi3addr,
+ cciss_scsi_get_device_id(h, scsi3addr,
this_device->device_id, sizeof(this_device->device_id));
switch (this_device->devtype)
@@ -1268,7 +1260,7 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
case 0x08: /* medium changer */
if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
printk(KERN_INFO "cciss%d: %s ignored, "
- "too many devices.\n", cntl_num,
+ "too many devices.\n", h->ctlr,
scsi_device_type(this_device->devtype));
break;
}
@@ -1280,7 +1272,7 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
}
}
- adjust_cciss_scsi_table(cntl_num, hostno, currentsd, ncurrent);
+ adjust_cciss_scsi_table(h, hostno, currentsd, ncurrent);
out:
kfree(inq_buff);
kfree(ld_buff);
@@ -1299,12 +1291,12 @@ is_keyword(char *ptr, int len, char *verb) // Thanks to ncr53c8xx.c
}
static int
-cciss_scsi_user_command(int ctlr, int hostno, char *buffer, int length)
+cciss_scsi_user_command(ctlr_info_t *h, int hostno, char *buffer, int length)
{
int arg_len;
if ((arg_len = is_keyword(buffer, length, "rescan")) != 0)
- cciss_update_non_disk_devices(ctlr, hostno);
+ cciss_update_non_disk_devices(h, hostno);
else
return -EINVAL;
return length;
@@ -1321,20 +1313,16 @@ cciss_scsi_proc_info(struct Scsi_Host *sh,
{
int buflen, datalen;
- ctlr_info_t *ci;
+ ctlr_info_t *h;
int i;
- int cntl_num;
-
- ci = (ctlr_info_t *) sh->hostdata[0];
- if (ci == NULL) /* This really shouldn't ever happen. */
+ h = (ctlr_info_t *) sh->hostdata[0];
+ if (h == NULL) /* This really shouldn't ever happen. */
return -EINVAL;
- cntl_num = ci->ctlr; /* Get our index into the hba[] array */
-
if (func == 0) { /* User is reading from /proc/scsi/ciss*?/?* */
buflen = sprintf(buffer, "cciss%d: SCSI host: %d\n",
- cntl_num, sh->host_no);
+ h->ctlr, sh->host_no);
/* this information is needed by apps to know which cciss
device corresponds to which scsi host number without
@@ -1344,8 +1332,9 @@ cciss_scsi_proc_info(struct Scsi_Host *sh,
this info is for an app to be able to use to know how to
get them back in sync. */
- for (i=0;i<ccissscsi[cntl_num].ndevices;i++) {
- struct cciss_scsi_dev_t *sd = &ccissscsi[cntl_num].dev[i];
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
+ struct cciss_scsi_dev_t *sd =
+ &ccissscsi[h->ctlr].dev[i];
buflen += sprintf(&buffer[buflen], "c%db%dt%dl%d %02d "
"0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
sh->host_no, sd->bus, sd->target, sd->lun,
@@ -1363,15 +1352,15 @@ cciss_scsi_proc_info(struct Scsi_Host *sh,
*start = buffer + offset;
return(datalen);
} else /* User is writing to /proc/scsi/cciss*?/?* ... */
- return cciss_scsi_user_command(cntl_num, sh->host_no,
+ return cciss_scsi_user_command(h, sh->host_no,
buffer, length);
}
/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
dma mapping and fills in the scatter gather entries of the
- cciss command, cp. */
+ cciss command, c. */
-static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *cp,
+static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
struct scsi_cmnd *cmd)
{
unsigned int len;
@@ -1385,7 +1374,7 @@ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *cp,
chained = 0;
sg_index = 0;
- curr_sg = cp->SG;
+ curr_sg = c->SG;
request_nsgs = scsi_dma_map(cmd);
if (request_nsgs) {
scsi_for_each_sg(cmd, sg, request_nsgs, i) {
@@ -1393,7 +1382,7 @@ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *cp,
!chained && request_nsgs - i > 1) {
chained = 1;
sg_index = 0;
- curr_sg = sa->cmd_sg_list[cp->cmdindex];
+ curr_sg = sa->cmd_sg_list[c->cmdindex];
}
addr64 = (__u64) sg_dma_address(sg);
len = sg_dma_len(sg);
@@ -1406,19 +1395,19 @@ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *cp,
++sg_index;
}
if (chained)
- cciss_map_sg_chain_block(h, cp,
- sa->cmd_sg_list[cp->cmdindex],
+ cciss_map_sg_chain_block(h, c,
+ sa->cmd_sg_list[c->cmdindex],
(request_nsgs - (h->max_cmd_sgentries - 1)) *
sizeof(SGDescriptor_struct));
}
/* track how many SG entries we are using */
if (request_nsgs > h->maxSG)
h->maxSG = request_nsgs;
- cp->Header.SGTotal = (__u8) request_nsgs + chained;
+ c->Header.SGTotal = (__u8) request_nsgs + chained;
if (request_nsgs > h->max_cmd_sgentries)
- cp->Header.SGList = h->max_cmd_sgentries;
+ c->Header.SGList = h->max_cmd_sgentries;
else
- cp->Header.SGList = cp->Header.SGTotal;
+ c->Header.SGList = c->Header.SGTotal;
return;
}
@@ -1426,18 +1415,17 @@ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *cp,
static int
cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
{
- ctlr_info_t *c;
- int ctlr, rc;
+ ctlr_info_t *h;
+ int rc;
unsigned char scsi3addr[8];
- CommandList_struct *cp;
+ CommandList_struct *c;
unsigned long flags;
// Get the ptr to our adapter structure (hba[i]) out of cmd->host.
// We violate cmd->host privacy here. (Is there another way?)
- c = (ctlr_info_t *) cmd->device->host->hostdata[0];
- ctlr = c->ctlr;
+ h = (ctlr_info_t *) cmd->device->host->hostdata[0];
- rc = lookup_scsi3addr(ctlr, cmd->device->channel, cmd->device->id,
+ rc = lookup_scsi3addr(h, cmd->device->channel, cmd->device->id,
cmd->device->lun, scsi3addr);
if (rc != 0) {
/* the scsi nexus does not match any that we presented... */
@@ -1449,18 +1437,13 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
return 0;
}
- /* printk("cciss_queue_command, p=%p, cmd=0x%02x, c%db%dt%dl%d\n",
- cmd, cmd->cmnd[0], ctlr, cmd->channel, cmd->target, cmd->lun);*/
- // printk("q:%p:c%db%dt%dl%d ", cmd, ctlr, cmd->channel,
- // cmd->target, cmd->lun);
-
/* Ok, we have a reasonable scsi nexus, so send the cmd down, and
see what the device thinks of it. */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- cp = scsi_cmd_alloc(c);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- if (cp == NULL) { /* trouble... */
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (c == NULL) { /* trouble... */
printk("scsi_cmd_alloc returned NULL!\n");
/* FIXME: next 3 lines are -> BAD! <- */
cmd->result = DID_NO_CONNECT << 16;
@@ -1472,35 +1455,41 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
cmd->scsi_done = done; // save this for use by completion code
- // save cp in case we have to abort it
- cmd->host_scribble = (unsigned char *) cp;
+ /* save c in case we have to abort it */
+ cmd->host_scribble = (unsigned char *) c;
- cp->cmd_type = CMD_SCSI;
- cp->scsi_cmd = cmd;
- cp->Header.ReplyQueue = 0; // unused in simple mode
- memcpy(&cp->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
- cp->Header.Tag.lower = cp->busaddr; // Use k. address of cmd as tag
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
+ c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
// Fill in the request block...
- cp->Request.Timeout = 0;
- memset(cp->Request.CDB, 0, sizeof(cp->Request.CDB));
- BUG_ON(cmd->cmd_len > sizeof(cp->Request.CDB));
- cp->Request.CDBLen = cmd->cmd_len;
- memcpy(cp->Request.CDB, cmd->cmnd, cmd->cmd_len);
- cp->Request.Type.Type = TYPE_CMD;
- cp->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Timeout = 0;
+ memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
+ BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
+ c->Request.CDBLen = cmd->cmd_len;
+ memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
+ c->Request.Type.Type = TYPE_CMD;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
switch(cmd->sc_data_direction)
{
- case DMA_TO_DEVICE: cp->Request.Type.Direction = XFER_WRITE; break;
- case DMA_FROM_DEVICE: cp->Request.Type.Direction = XFER_READ; break;
- case DMA_NONE: cp->Request.Type.Direction = XFER_NONE; break;
+ case DMA_TO_DEVICE:
+ c->Request.Type.Direction = XFER_WRITE;
+ break;
+ case DMA_FROM_DEVICE:
+ c->Request.Type.Direction = XFER_READ;
+ break;
+ case DMA_NONE:
+ c->Request.Type.Direction = XFER_NONE;
+ break;
case DMA_BIDIRECTIONAL:
// This can happen if a buggy application does a scsi passthru
// and sets both inlen and outlen to non-zero. ( see
// ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
- cp->Request.Type.Direction = XFER_RSVD;
+ c->Request.Type.Direction = XFER_RSVD;
// This is technically wrong, and cciss controllers should
// reject it with CMD_INVALID, which is the most correct
// response, but non-fibre backends appear to let it
@@ -1516,14 +1505,13 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
BUG();
break;
}
- cciss_scatter_gather(c, cp, cmd);
- enqueue_cmd_and_start_io(c, cp);
+ cciss_scatter_gather(h, c, cmd);
+ enqueue_cmd_and_start_io(h, c);
/* the cmd'll come back via intr handler in complete_scsi_command() */
return 0;
}
-static void
-cciss_unregister_scsi(int ctlr)
+static void cciss_unregister_scsi(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
@@ -1531,59 +1519,59 @@ cciss_unregister_scsi(int ctlr)
/* we are being forcibly unloaded, and may not refuse. */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = hba[ctlr]->scsi_ctlr;
+ spin_lock_irqsave(&h->lock, flags);
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
/* if we weren't ever actually registered, don't unregister */
if (sa->registered) {
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
scsi_remove_host(sa->scsi_host);
scsi_host_put(sa->scsi_host);
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
}
/* set scsi_host to NULL so our detect routine will
find us on register */
sa->scsi_host = NULL;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- scsi_cmd_stack_free(ctlr);
+ spin_unlock_irqrestore(&h->lock, flags);
+ scsi_cmd_stack_free(h);
kfree(sa);
}
-static int
-cciss_engage_scsi(int ctlr)
+static int cciss_engage_scsi(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = hba[ctlr]->scsi_ctlr;
+ spin_lock_irqsave(&h->lock, flags);
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (sa->registered) {
- printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ printk(KERN_INFO "cciss%d: SCSI subsystem already engaged.\n",
+ h->ctlr);
+ spin_unlock_irqrestore(&h->lock, flags);
return -ENXIO;
}
sa->registered = 1;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- cciss_update_non_disk_devices(ctlr, -1);
- cciss_scsi_detect(ctlr);
+ spin_unlock_irqrestore(&h->lock, flags);
+ cciss_update_non_disk_devices(h, -1);
+ cciss_scsi_detect(h);
return 0;
}
static void
-cciss_seq_tape_report(struct seq_file *seq, int ctlr)
+cciss_seq_tape_report(struct seq_file *seq, ctlr_info_t *h)
{
unsigned long flags;
- CPQ_TAPE_LOCK(ctlr, flags);
+ CPQ_TAPE_LOCK(h, flags);
seq_printf(seq,
"Sequential access devices: %d\n\n",
- ccissscsi[ctlr].ndevices);
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ ccissscsi[h->ctlr].ndevices);
+ CPQ_TAPE_UNLOCK(h, flags);
}
static int wait_for_device_to_become_ready(ctlr_info_t *h,
@@ -1615,7 +1603,7 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h,
waittime = waittime * 2;
/* Send the Test Unit Ready */
- rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0,
+ rc = fill_cmd(h, c, TEST_UNIT_READY, NULL, 0, 0,
lunaddr, TYPE_CMD);
if (rc == 0)
rc = sendcmd_withirq_core(h, c, 0);
@@ -1672,26 +1660,25 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
int rc;
CommandList_struct *cmd_in_trouble;
unsigned char lunaddr[8];
- ctlr_info_t *c;
- int ctlr;
+ ctlr_info_t *h;
/* find the controller to which the command to be aborted was sent */
- c = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
- if (c == NULL) /* paranoia */
+ h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
+ if (h == NULL) /* paranoia */
return FAILED;
- ctlr = c->ctlr;
- printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr);
+ printk(KERN_WARNING
+ "cciss%d: resetting tape drive or medium changer.\n", h->ctlr);
/* find the command that's giving us trouble */
cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_in_trouble == NULL) /* paranoia */
return FAILED;
memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8);
/* send a reset to the SCSI LUN which the command was sent to */
- rc = sendcmd_withirq(CCISS_RESET_MSG, ctlr, NULL, 0, 0, lunaddr,
+ rc = sendcmd_withirq(h, CCISS_RESET_MSG, NULL, 0, 0, lunaddr,
TYPE_MSG);
- if (rc == 0 && wait_for_device_to_become_ready(c, lunaddr) == 0)
+ if (rc == 0 && wait_for_device_to_become_ready(h, lunaddr) == 0)
return SUCCESS;
- printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr);
+ printk(KERN_WARNING "cciss%d: resetting device failed.\n", h->ctlr);
return FAILED;
}
@@ -1700,22 +1687,20 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
int rc;
CommandList_struct *cmd_to_abort;
unsigned char lunaddr[8];
- ctlr_info_t *c;
- int ctlr;
+ ctlr_info_t *h;
/* find the controller to which the command to be aborted was sent */
- c = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
- if (c == NULL) /* paranoia */
+ h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
+ if (h == NULL) /* paranoia */
return FAILED;
- ctlr = c->ctlr;
- printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", ctlr);
+ printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", h->ctlr);
/* find the command to be aborted */
cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_to_abort == NULL) /* paranoia */
return FAILED;
memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8);
- rc = sendcmd_withirq(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag,
+ rc = sendcmd_withirq(h, CCISS_ABORT_MSG, &cmd_to_abort->Header.Tag,
0, 0, lunaddr, TYPE_MSG);
if (rc == 0)
return SUCCESS;
--
GitLab
From 6b4d96b878d67c6768766e682c188a2a8bdc804a Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:43 -0500
Subject: [PATCH 367/863] cciss: separate cmd_alloc() and cmd_special_alloc()
cciss: separate cmd_alloc() and cmd_special_alloc()
cmd_alloc() took a parameter which caused it to either allocate
from a pre-allocated pool, or allocate using pci_alloc_consistent.
This parameter is always known at compile time, so this would
be better handled by breaking the function into two functions
and differentiating the cases by function names. Same goes
for cmd_free().
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 153 ++++++++++++++++++++-----------------
drivers/block/cciss_scsi.c | 10 ++-
2 files changed, 89 insertions(+), 74 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 70ad24f3604f5..1dc95740b3bb4 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -907,60 +907,73 @@ static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index,
/*
* For operations that cannot sleep, a command block is allocated at init,
* and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
- * which ones are free or in use. For operations that can wait for kmalloc
- * to possible sleep, this routine can be called with get_from_pool set to 0.
- * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
+ * which ones are free or in use.
*/
-static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool)
+static CommandList_struct *cmd_alloc(ctlr_info_t *h)
{
CommandList_struct *c;
int i;
u64bit temp64;
dma_addr_t cmd_dma_handle, err_dma_handle;
- if (!get_from_pool) {
- c = (CommandList_struct *) pci_alloc_consistent(h->pdev,
- sizeof(CommandList_struct), &cmd_dma_handle);
- if (c == NULL)
+ do {
+ i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
+ if (i == h->nr_cmds)
return NULL;
- memset(c, 0, sizeof(CommandList_struct));
+ } while (test_and_set_bit(i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
+#ifdef CCISS_DEBUG
+ printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
+#endif
+ c = h->cmd_pool + i;
+ memset(c, 0, sizeof(CommandList_struct));
+ cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(CommandList_struct);
+ c->err_info = h->errinfo_pool + i;
+ memset(c->err_info, 0, sizeof(ErrorInfo_struct));
+ err_dma_handle = h->errinfo_pool_dhandle
+ + i * sizeof(ErrorInfo_struct);
+ h->nr_allocs++;
- c->cmdindex = -1;
+ c->cmdindex = i;
- c->err_info = (ErrorInfo_struct *)
- pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
- &err_dma_handle);
+ INIT_HLIST_NODE(&c->list);
+ c->busaddr = (__u32) cmd_dma_handle;
+ temp64.val = (__u64) err_dma_handle;
+ c->ErrDesc.Addr.lower = temp64.val32.lower;
+ c->ErrDesc.Addr.upper = temp64.val32.upper;
+ c->ErrDesc.Len = sizeof(ErrorInfo_struct);
- if (c->err_info == NULL) {
- pci_free_consistent(h->pdev,
- sizeof(CommandList_struct), c, cmd_dma_handle);
- return NULL;
- }
- memset(c->err_info, 0, sizeof(ErrorInfo_struct));
- } else { /* get it out of the controllers pool */
-
- do {
- i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
- if (i == h->nr_cmds)
- return NULL;
- } while (test_and_set_bit
- (i & (BITS_PER_LONG - 1),
- h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
-#endif
- c = h->cmd_pool + i;
- memset(c, 0, sizeof(CommandList_struct));
- cmd_dma_handle = h->cmd_pool_dhandle
- + i * sizeof(CommandList_struct);
- c->err_info = h->errinfo_pool + i;
- memset(c->err_info, 0, sizeof(ErrorInfo_struct));
- err_dma_handle = h->errinfo_pool_dhandle
- + i * sizeof(ErrorInfo_struct);
- h->nr_allocs++;
+ c->ctlr = h->ctlr;
+ return c;
+}
+
+/* allocate a command using pci_alloc_consistent, used for ioctls,
+ * etc., not for the main i/o path.
+ */
+static CommandList_struct *cmd_special_alloc(ctlr_info_t *h)
+{
+ CommandList_struct *c;
+ u64bit temp64;
+ dma_addr_t cmd_dma_handle, err_dma_handle;
+
+ c = (CommandList_struct *) pci_alloc_consistent(h->pdev,
+ sizeof(CommandList_struct), &cmd_dma_handle);
+ if (c == NULL)
+ return NULL;
+ memset(c, 0, sizeof(CommandList_struct));
+
+ c->cmdindex = -1;
+
+ c->err_info = (ErrorInfo_struct *)
+ pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
+ &err_dma_handle);
- c->cmdindex = i;
+ if (c->err_info == NULL) {
+ pci_free_consistent(h->pdev,
+ sizeof(CommandList_struct), c, cmd_dma_handle);
+ return NULL;
}
+ memset(c->err_info, 0, sizeof(ErrorInfo_struct));
INIT_HLIST_NODE(&c->list);
c->busaddr = (__u32) cmd_dma_handle;
@@ -973,27 +986,26 @@ static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool)
return c;
}
-/*
- * Frees a command block that was previously allocated with cmd_alloc().
- */
-static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool)
+static void cmd_free(ctlr_info_t *h, CommandList_struct *c)
{
int i;
+
+ i = c - h->cmd_pool;
+ clear_bit(i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG));
+ h->nr_frees++;
+}
+
+static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c)
+{
u64bit temp64;
- if (!got_from_pool) {
- temp64.val32.lower = c->ErrDesc.Addr.lower;
- temp64.val32.upper = c->ErrDesc.Addr.upper;
- pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
- c->err_info, (dma_addr_t) temp64.val);
- pci_free_consistent(h->pdev, sizeof(CommandList_struct),
- c, (dma_addr_t) c->busaddr);
- } else {
- i = c - h->cmd_pool;
- clear_bit(i & (BITS_PER_LONG - 1),
- h->cmd_pool_bits + (i / BITS_PER_LONG));
- h->nr_frees++;
- }
+ temp64.val32.lower = c->ErrDesc.Addr.lower;
+ temp64.val32.upper = c->ErrDesc.Addr.upper;
+ pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
+ c->err_info, (dma_addr_t) temp64.val);
+ pci_free_consistent(h->pdev, sizeof(CommandList_struct),
+ c, (dma_addr_t) c->busaddr);
}
static inline ctlr_info_t *get_host(struct gendisk *disk)
@@ -1470,7 +1482,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
} else {
memset(buff, 0, iocommand.buf_size);
}
- c = cmd_alloc(h, 0);
+ c = cmd_special_alloc(h);
if (!c) {
kfree(buff);
return -ENOMEM;
@@ -1524,7 +1536,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (copy_to_user
(argp, &iocommand, sizeof(IOCTL_Command_struct))) {
kfree(buff);
- cmd_free(h, c, 0);
+ cmd_special_free(h, c);
return -EFAULT;
}
@@ -1533,12 +1545,12 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
if (copy_to_user
(iocommand.buf, buff, iocommand.buf_size)) {
kfree(buff);
- cmd_free(h, c, 0);
+ cmd_special_free(h, c);
return -EFAULT;
}
}
kfree(buff);
- cmd_free(h, c, 0);
+ cmd_special_free(h, c);
return 0;
}
case CCISS_BIG_PASSTHRU:{
@@ -1620,7 +1632,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
data_ptr += sz;
sg_used++;
}
- c = cmd_alloc(h, 0);
+ c = cmd_special_alloc(h);
if (!c) {
status = -ENOMEM;
goto cleanup1;
@@ -1668,7 +1680,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
/* Copy the error information out */
ioc->error_info = *(c->err_info);
if (copy_to_user(argp, ioc, sizeof(*ioc))) {
- cmd_free(h, c, 0);
+ cmd_special_free(h, c);
status = -EFAULT;
goto cleanup1;
}
@@ -1678,14 +1690,14 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
for (i = 0; i < sg_used; i++) {
if (copy_to_user
(ptr, buff[i], buff_size[i])) {
- cmd_free(h, c, 0);
+ cmd_special_free(h, c);
status = -EFAULT;
goto cleanup1;
}
ptr += buff_size[i];
}
}
- cmd_free(h, c, 0);
+ cmd_special_free(h, c);
status = 0;
cleanup1:
if (buff) {
@@ -1813,7 +1825,7 @@ static void cciss_softirq_done(struct request *rq)
blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
spin_lock_irqsave(&h->lock, flags);
- cmd_free(h, c, 1);
+ cmd_free(h, c);
cciss_check_queues(h);
spin_unlock_irqrestore(&h->lock, flags);
}
@@ -2765,7 +2777,7 @@ static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
CommandList_struct *c;
int return_status;
- c = cmd_alloc(h, 0);
+ c = cmd_special_alloc(h);
if (!c)
return -ENOMEM;
return_status = fill_cmd(h, c, cmd, buff, size, page_code,
@@ -2773,7 +2785,7 @@ static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
if (return_status == IO_OK)
return_status = sendcmd_withirq_core(h, c, 1);
- cmd_free(h, c, 0);
+ cmd_special_free(h, c);
return return_status;
}
@@ -3240,7 +3252,8 @@ static void do_cciss_request(struct request_queue *q)
BUG_ON(creq->nr_phys_segments > h->maxsgentries);
- if ((c = cmd_alloc(h, 1)) == NULL)
+ c = cmd_alloc(h);
+ if (!c)
goto full;
blk_start_request(creq);
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 9133ad4c7b1b7..9fe0d8ffc90de 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -49,8 +49,10 @@ static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
__u8 page_code, unsigned char *scsi3addr,
int cmd_type);
-static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool);
-static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool);
+static CommandList_struct *cmd_alloc(ctlr_info_t *h);
+static CommandList_struct *cmd_special_alloc(ctlr_info_t *h);
+static void cmd_free(ctlr_info_t *h, CommandList_struct *c);
+static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c);
static int cciss_scsi_proc_info(
struct Scsi_Host *sh,
@@ -1582,7 +1584,7 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h,
int waittime = HZ;
CommandList_struct *c;
- c = cmd_alloc(h, 1);
+ c = cmd_alloc(h);
if (!c) {
printk(KERN_WARNING "cciss%d: out of memory in "
"wait_for_device_to_become_ready.\n", h->ctlr);
@@ -1640,7 +1642,7 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h,
else
printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr);
- cmd_free(h, c, 1);
+ cmd_free(h, c);
return rc;
}
--
GitLab
From b2a4a43dbaf10383703d512bbe560d5a24da0bf2 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:48 -0500
Subject: [PATCH 368/863] cciss: change printks to dev_warn, etc.
cciss: change printks to dev_warn, etc.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 314 ++++++++++++++++---------------------
drivers/block/cciss_scsi.c | 159 +++++++++----------
2 files changed, 212 insertions(+), 261 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 1dc95740b3bb4..35a9f08cf74fc 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -922,9 +922,6 @@ static CommandList_struct *cmd_alloc(ctlr_info_t *h)
return NULL;
} while (test_and_set_bit(i & (BITS_PER_LONG - 1),
h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
-#endif
c = h->cmd_pool + i;
memset(c, 0, sizeof(CommandList_struct));
cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(CommandList_struct);
@@ -1026,10 +1023,7 @@ static int cciss_open(struct block_device *bdev, fmode_t mode)
ctlr_info_t *h = get_host(bdev->bd_disk);
drive_info_struct *drv = get_drv(bdev->bd_disk);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
-#endif /* CCISS_DEBUG */
-
+ dev_dbg(&h->pdev->dev, "cciss_open %s\n", bdev->bd_disk->disk_name);
if (drv->busy_configuring)
return -EBUSY;
/*
@@ -1081,11 +1075,7 @@ static int cciss_release(struct gendisk *disk, fmode_t mode)
lock_kernel();
h = get_host(disk);
drv = get_drv(disk);
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name);
-#endif /* CCISS_DEBUG */
-
+ dev_dbg(&h->pdev->dev, "cciss_release %s\n", disk->disk_name);
drv->usage_count--;
h->usage_count--;
unlock_kernel();
@@ -1251,10 +1241,8 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
drive_info_struct *drv = get_drv(disk);
void __user *argp = (void __user *)arg;
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg);
-#endif /* CCISS_DEBUG */
-
+ dev_dbg(&h->pdev->dev, "cciss_ioctl: Called with cmd=%x %lx\n",
+ cmd, arg);
switch (cmd) {
case CCISS_GETPCIINFO:
{
@@ -1299,10 +1287,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
(&intinfo, argp, sizeof(cciss_coalint_struct)))
return -EFAULT;
if ((intinfo.delay == 0) && (intinfo.count == 0))
- {
-// printk("cciss_ioctl: delay and count cannot be 0\n");
return -EINVAL;
- }
spin_lock_irqsave(&h->lock, flags);
/* Update the field, and then ring the doorbell */
writel(intinfo.delay,
@@ -1814,9 +1799,7 @@ static void cciss_softirq_done(struct request *rq)
++sg_index;
}
-#ifdef CCISS_DEBUG
- printk("Done with %p\n", rq);
-#endif /* CCISS_DEBUG */
+ dev_dbg(&h->pdev->dev, "Done with %p\n", rq);
/* set the residual count for pc requests */
if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
@@ -2029,7 +2012,7 @@ static void cciss_update_drive_info(ctlr_info_t *h, int drv_index,
* (unless it's the first disk (for the controller node).
*/
if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
- printk(KERN_WARNING "disk %d has changed.\n", drv_index);
+ dev_warn(&h->pdev->dev, "disk %d has changed.\n", drv_index);
spin_lock_irqsave(&h->lock, flags);
h->drv[drv_index]->busy_configuring = 1;
spin_unlock_irqrestore(&h->lock, flags);
@@ -2082,8 +2065,8 @@ static void cciss_update_drive_info(ctlr_info_t *h, int drv_index,
if (cciss_add_disk(h, disk, drv_index) != 0) {
cciss_free_gendisk(h, drv_index);
cciss_free_drive_info(h, drv_index);
- printk(KERN_WARNING "cciss:%d could not update "
- "disk %d\n", h->ctlr, drv_index);
+ dev_warn(&h->pdev->dev, "could not update disk %d\n",
+ drv_index);
--h->num_luns;
}
}
@@ -2093,7 +2076,7 @@ static void cciss_update_drive_info(ctlr_info_t *h, int drv_index,
kfree(drvinfo);
return;
mem_msg:
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
goto freeret;
}
@@ -2185,9 +2168,9 @@ static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[],
h->gendisk[drv_index] =
alloc_disk(1 << NWD_SHIFT);
if (!h->gendisk[drv_index]) {
- printk(KERN_ERR "cciss%d: could not "
- "allocate a new disk %d\n",
- h->ctlr, drv_index);
+ dev_err(&h->pdev->dev,
+ "could not allocate a new disk %d\n",
+ drv_index);
goto err_free_drive_info;
}
}
@@ -2238,8 +2221,7 @@ static void cciss_add_controller_node(ctlr_info_t *h)
cciss_free_gendisk(h, drv_index);
cciss_free_drive_info(h, drv_index);
error:
- printk(KERN_WARNING "cciss%d: could not "
- "add disk 0.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "could not add disk 0.\n");
return;
}
@@ -2287,8 +2269,8 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time,
if (return_code == IO_OK)
listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
else { /* reading number of logical volumes failed */
- printk(KERN_WARNING "cciss: report logical volume"
- " command failed\n");
+ dev_warn(&h->pdev->dev,
+ "report logical volume command failed\n");
listlength = 0;
goto freeret;
}
@@ -2296,7 +2278,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time,
num_luns = listlength / 8; /* 8 bytes per entry */
if (num_luns > CISS_MAX_LUN) {
num_luns = CISS_MAX_LUN;
- printk(KERN_WARNING "cciss: more luns configured"
+ dev_warn(&h->pdev->dev, "more luns configured"
" on controller than can be handled by"
" this driver.\n");
}
@@ -2380,7 +2362,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time,
*/
return -1;
mem_msg:
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
h->busy_configuring = 0;
goto freeret;
}
@@ -2587,9 +2569,7 @@ static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
c->Request.Timeout = 0;
break;
default:
- printk(KERN_WARNING
- "cciss%d: Unknown Command 0x%c\n",
- h->ctlr, cmd);
+ dev_warn(&h->pdev->dev, "Unknown Command 0x%c\n", cmd);
return IO_ERROR;
}
} else if (cmd_type == TYPE_MSG) {
@@ -2621,14 +2601,12 @@ static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
c->Request.CDB[0] = cmd;
break;
default:
- printk(KERN_WARNING
- "cciss%d: unknown message type %d\n",
- h->ctlr, cmd);
+ dev_warn(&h->pdev->dev,
+ "unknown message type %d\n", cmd);
return IO_ERROR;
}
} else {
- printk(KERN_WARNING
- "cciss%d: unknown command type %d\n", h->ctlr, cmd_type);
+ dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
return IO_ERROR;
}
/* Fill in the scatter gather information */
@@ -2656,15 +2634,14 @@ static int check_target_status(ctlr_info_t *h, CommandList_struct *c)
default:
if (check_for_unit_attention(h, c))
return IO_NEEDS_RETRY;
- printk(KERN_WARNING "cciss%d: cmd 0x%02x "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x "
"check condition, sense key = 0x%02x\n",
- h->ctlr, c->Request.CDB[0],
- c->err_info->SenseInfo[2]);
+ c->Request.CDB[0], c->err_info->SenseInfo[2]);
}
break;
default:
- printk(KERN_WARNING "cciss%d: cmd 0x%02x"
- "scsi status = 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "cmd 0x%02x"
+ "scsi status = 0x%02x\n",
c->Request.CDB[0], c->err_info->ScsiStatus);
break;
}
@@ -2687,43 +2664,42 @@ static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c)
/* expected for inquiry and report lun commands */
break;
case CMD_INVALID:
- printk(KERN_WARNING "cciss: cmd 0x%02x is "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x is "
"reported invalid\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd 0x%02x has "
- "protocol error \n", c->Request.CDB[0]);
+ dev_warn(&h->pdev->dev, "cmd 0x%02x has "
+ "protocol error\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x had "
" hardware error\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x had "
"connection lost\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd 0x%02x was "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x was "
"aborted\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd 0x%02x reports "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x reports "
"abort failed\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING
- "cciss%d: unsolicited abort 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "unsolicited abort 0x%02x\n",
c->Request.CDB[0]);
return_status = IO_NEEDS_RETRY;
break;
default:
- printk(KERN_WARNING "cciss: cmd 0x%02x returned "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x returned "
"unknown status %x\n", c->Request.CDB[0],
c->err_info->CommandStatus);
return_status = IO_ERROR;
@@ -2751,7 +2727,7 @@ static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
if (return_status == IO_NEEDS_RETRY &&
c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING "cciss%d: retrying 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "retrying 0x%02x\n",
c->Request.CDB[0]);
c->retry_count++;
/* erase the old error information */
@@ -2805,8 +2781,8 @@ static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
if (inq_buff->data_byte[8] == 0xFF) {
- printk(KERN_WARNING
- "cciss: reading geometry failed, volume "
+ dev_warn(&h->pdev->dev,
+ "reading geometry failed, volume "
"does not support reading geometry\n");
drv->heads = 255;
drv->sectors = 32; /* Sectors per track */
@@ -2830,7 +2806,7 @@ static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
drv->cylinders = real_size;
}
} else { /* Get geometry failed */
- printk(KERN_WARNING "cciss: reading geometry failed\n");
+ dev_warn(&h->pdev->dev, "reading geometry failed\n");
}
}
@@ -2844,7 +2820,7 @@ cciss_read_capacity(ctlr_info_t *h, int logvol, sector_t *total_size,
buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
if (!buf) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return;
}
@@ -2855,7 +2831,7 @@ cciss_read_capacity(ctlr_info_t *h, int logvol, sector_t *total_size,
*total_size = be32_to_cpu(*(__be32 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
- printk(KERN_WARNING "cciss: read capacity failed\n");
+ dev_warn(&h->pdev->dev, "read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
@@ -2871,7 +2847,7 @@ static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
if (!buf) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return;
}
@@ -2883,11 +2859,11 @@ static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
*total_size = be64_to_cpu(*(__be64 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
- printk(KERN_WARNING "cciss: read capacity failed\n");
+ dev_warn(&h->pdev->dev, "read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- printk(KERN_INFO " blocks= %llu block_size= %d\n",
+ dev_info(&h->pdev->dev, " blocks= %llu block_size= %d\n",
(unsigned long long)*total_size+1, *block_size);
kfree(buf);
}
@@ -2915,7 +2891,7 @@ static int cciss_revalidate(struct gendisk *disk)
inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
if (inq_buff == NULL) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return 1;
}
if (h->cciss_read == CCISS_READ_10) {
@@ -2959,7 +2935,7 @@ static void start_io(ctlr_info_t *h)
c = hlist_entry(h->reqQ.first, CommandList_struct, list);
/* can't do anything if fifo is full */
if ((h->access.fifo_full(h))) {
- printk(KERN_WARNING "cciss: fifo full\n");
+ dev_warn(&h->pdev->dev, "fifo full\n");
break;
}
@@ -3026,7 +3002,7 @@ static inline int evaluate_target_status(ctlr_info_t *h,
if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC)
- printk(KERN_WARNING "cciss: cmd %p "
+ dev_warn(&h->pdev->dev, "cmd %p "
"has SCSI Status 0x%x\n",
cmd, cmd->err_info->ScsiStatus);
return error_value;
@@ -3047,7 +3023,7 @@ static inline int evaluate_target_status(ctlr_info_t *h,
/* Not SG_IO or similar? */
if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC) {
if (error_value != 0)
- printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
+ dev_warn(&h->pdev->dev, "cmd %p has CHECK CONDITION"
" sense key = 0x%x\n", cmd, sense_key);
return error_value;
}
@@ -3088,7 +3064,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
break;
case CMD_DATA_UNDERRUN:
if (cmd->rq->cmd_type == REQ_TYPE_FS) {
- printk(KERN_WARNING "cciss: cmd %p has"
+ dev_warn(&h->pdev->dev, "cmd %p has"
" completed with data underrun "
"reported\n", cmd);
cmd->rq->resid_len = cmd->err_info->ResidualCnt;
@@ -3096,12 +3072,12 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
break;
case CMD_DATA_OVERRUN:
if (cmd->rq->cmd_type == REQ_TYPE_FS)
- printk(KERN_WARNING "cciss: cmd %p has"
+ dev_warn(&h->pdev->dev, "cciss: cmd %p has"
" completed with data overrun "
"reported\n", cmd);
break;
case CMD_INVALID:
- printk(KERN_WARNING "cciss: cmd %p is "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p is "
"reported invalid\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
@@ -3109,15 +3085,15 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd %p has "
- "protocol error \n", cmd);
+ dev_warn(&h->pdev->dev, "cciss: cmd %p has "
+ "protocol error\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd %p had "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p had "
" hardware error\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
@@ -3125,7 +3101,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd %p had "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p had "
"connection lost\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
@@ -3133,7 +3109,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd %p was "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p was "
"aborted\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
@@ -3141,7 +3117,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd %p reports "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p reports "
"abort failed\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
@@ -3149,31 +3125,29 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss%d: unsolicited "
+ dev_warn(&h->pdev->dev, "cciss%d: unsolicited "
"abort %p\n", h->ctlr, cmd);
if (cmd->retry_count < MAX_CMD_RETRIES) {
retry_cmd = 1;
- printk(KERN_WARNING
- "cciss%d: retrying %p\n", h->ctlr, cmd);
+ dev_warn(&h->pdev->dev, "retrying %p\n", cmd);
cmd->retry_count++;
} else
- printk(KERN_WARNING
- "cciss%d: %p retried too "
- "many times\n", h->ctlr, cmd);
+ dev_warn(&h->pdev->dev,
+ "%p retried too many times\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
+ dev_warn(&h->pdev->dev, "cmd %p timedout\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
DID_PASSTHROUGH : DID_ERROR);
break;
default:
- printk(KERN_WARNING "cciss: cmd %p returned "
+ dev_warn(&h->pdev->dev, "cmd %p returned "
"unknown status %x\n", cmd,
cmd->err_info->CommandStatus);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
@@ -3282,11 +3256,8 @@ static void do_cciss_request(struct request_queue *q)
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
start_blk = blk_rq_pos(creq);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",
+ dev_dbg(&h->pdev->dev, "sector =%d nr_sectors=%d\n",
(int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
-#endif /* CCISS_DEBUG */
-
sg_init_table(tmp_sg, h->maxsgentries);
seg = blk_rq_map_sg(q, creq, tmp_sg);
@@ -3326,11 +3297,9 @@ static void do_cciss_request(struct request_queue *q)
if (seg > h->maxSG)
h->maxSG = seg;
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %ld sectors in %d segments "
+ dev_dbg(&h->pdev->dev, "Submitting %u sectors in %d segments "
"chained[%d]\n",
blk_rq_sectors(creq), seg, chained);
-#endif /* CCISS_DEBUG */
c->Header.SGTotal = seg + chained;
if (seg <= h->max_cmd_sgentries)
@@ -3373,7 +3342,8 @@ static void do_cciss_request(struct request_queue *q)
c->Request.CDBLen = creq->cmd_len;
memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
} else {
- printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type);
+ dev_warn(&h->pdev->dev, "bad request type %d\n",
+ creq->cmd_type);
BUG();
}
@@ -3675,18 +3645,17 @@ static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
switch (c->err_info->SenseInfo[12]) {
case STATE_CHANGED:
- printk(KERN_WARNING "cciss%d: a state change "
- "detected, command retried\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "a state change "
+ "detected, command retried\n");
return 1;
break;
case LUN_FAILED:
- printk(KERN_WARNING "cciss%d: LUN failure "
- "detected, action required\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "LUN failure "
+ "detected, action required\n");
return 1;
break;
case REPORT_LUNS_CHANGED:
- printk(KERN_WARNING "cciss%d: report LUN data "
- "changed\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "report LUN data changed\n");
/*
* Here, we could call add_to_scan_list and wake up the scan thread,
* except that it's quite likely that we will get more than one
@@ -3706,19 +3675,18 @@ static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
return 1;
break;
case POWER_OR_RESET:
- printk(KERN_WARNING "cciss%d: a power on "
- "or device reset detected\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "a power on or device reset detected\n");
return 1;
break;
case UNIT_ATTENTION_CLEARED:
- printk(KERN_WARNING "cciss%d: unit attention "
- "cleared by another initiator\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "unit attention cleared by another initiator\n");
return 1;
break;
default:
- printk(KERN_WARNING "cciss%d: unknown "
- "unit attention detected\n", h->ctlr);
- return 1;
+ dev_warn(&h->pdev->dev, "unknown unit attention detected\n");
+ return 1;
}
}
@@ -3727,38 +3695,40 @@ static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
* the io functions.
* This is for debug only.
*/
-static void print_cfg_table(CfgTable_struct *tb)
+static void print_cfg_table(ctlr_info_t *h)
{
-#ifdef CCISS_DEBUG
int i;
char temp_name[17];
+ CfgTable_struct *tb = h->cfgtable;
- printk("Controller Configuration information\n");
- printk("------------------------------------\n");
+ dev_dbg(&h->pdev->dev, "Controller Configuration information\n");
+ dev_dbg(&h->pdev->dev, "------------------------------------\n");
for (i = 0; i < 4; i++)
temp_name[i] = readb(&(tb->Signature[i]));
temp_name[4] = '\0';
- printk(" Signature = %s\n", temp_name);
- printk(" Spec Number = %d\n", readl(&(tb->SpecValence)));
- printk(" Transport methods supported = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Signature = %s\n", temp_name);
+ dev_dbg(&h->pdev->dev, " Spec Number = %d\n",
+ readl(&(tb->SpecValence)));
+ dev_dbg(&h->pdev->dev, " Transport methods supported = 0x%x\n",
readl(&(tb->TransportSupport)));
- printk(" Transport methods active = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Transport methods active = 0x%x\n",
readl(&(tb->TransportActive)));
- printk(" Requested transport Method = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Requested transport Method = 0x%x\n",
readl(&(tb->HostWrite.TransportRequest)));
- printk(" Coalesce Interrupt Delay = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Coalesce Interrupt Delay = 0x%x\n",
readl(&(tb->HostWrite.CoalIntDelay)));
- printk(" Coalesce Interrupt Count = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Coalesce Interrupt Count = 0x%x\n",
readl(&(tb->HostWrite.CoalIntCount)));
- printk(" Max outstanding commands = 0x%d\n",
+ dev_dbg(&h->pdev->dev, " Max outstanding commands = 0x%d\n",
readl(&(tb->CmdsOutMax)));
- printk(" Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
+ dev_dbg(&h->pdev->dev, " Bus Types = 0x%x\n",
+ readl(&(tb->BusTypes)));
for (i = 0; i < 16; i++)
temp_name[i] = readb(&(tb->ServerName[i]));
temp_name[16] = '\0';
- printk(" Server Name = %s\n", temp_name);
- printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat)));
-#endif /* CCISS_DEBUG */
+ dev_dbg(&h->pdev->dev, " Server Name = %s\n", temp_name);
+ dev_dbg(&h->pdev->dev, " Heartbeat Counter = 0x%x\n\n\n",
+ readl(&(tb->HeartBeat)));
}
static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
@@ -3783,7 +3753,7 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
offset += 8;
break;
default: /* reserved in PCI 2.2 */
- printk(KERN_WARNING
+ dev_warn(&pdev->dev,
"Base address is invalid\n");
return -1;
break;
@@ -3908,7 +3878,7 @@ static __devinit void cciss_enter_performant_mode(ctlr_info_t *h)
cciss_wait_for_mode_change_ack(h);
register_value = readl(&(h->cfgtable->TransportActive));
if (!(register_value & CFGTBL_Trans_Performant))
- printk(KERN_WARNING "cciss: unable to get board into"
+ dev_warn(&h->pdev->dev, "cciss: unable to get board into"
" performant mode\n");
}
@@ -3923,14 +3893,13 @@ static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
if (!(trans_support & PERFORMANT_MODE))
return;
- printk(KERN_WARNING "cciss%d: Placing controller into "
- "performant mode\n", h->ctlr);
+ dev_dbg(&h->pdev->dev, "Placing controller into performant mode\n");
/* Performant mode demands commands on a 32 byte boundary
* pci_alloc_consistent aligns on page boundarys already.
* Just need to check if divisible by 32
*/
if ((sizeof(CommandList_struct) % 32) != 0) {
- printk(KERN_WARNING "%s %d %s\n",
+ dev_warn(&h->pdev->dev, "%s %d %s\n",
"cciss info: command size[",
(int)sizeof(CommandList_struct),
"] not divisible by 32, no performant mode..\n");
@@ -3995,12 +3964,12 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *h)
return;
}
if (err > 0) {
- printk(KERN_WARNING "cciss: only %d MSI-X vectors "
- "available\n", err);
+ dev_warn(&h->pdev->dev,
+ "only %d MSI-X vectors available\n", err);
goto default_int_mode;
} else {
- printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
- err);
+ dev_warn(&h->pdev->dev,
+ "MSI-X init failed %d\n", err);
goto default_int_mode;
}
}
@@ -4008,7 +3977,7 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *h)
if (!pci_enable_msi(h->pdev))
h->msi_vector = 1;
else
- printk(KERN_WARNING "cciss: MSI init failed\n");
+ dev_warn(&h->pdev->dev, "MSI init failed\n");
}
default_int_mode:
#endif /* CONFIG_PCI_MSI */
@@ -4210,28 +4179,24 @@ static int __devinit cciss_pci_init(ctlr_info_t *h)
h->access = *(products[prod_index].access);
if (cciss_board_disabled(h)) {
- printk(KERN_WARNING
- "cciss: controller appears to be disabled\n");
+ dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
return -ENODEV;
}
err = pci_enable_device(h->pdev);
if (err) {
- printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
+ dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
return err;
}
err = pci_request_regions(h->pdev, "cciss");
if (err) {
- printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
- "aborting\n");
+ dev_warn(&h->pdev->dev,
+ "Cannot obtain PCI resources, aborting\n");
return err;
}
-#ifdef CCISS_DEBUG
- printk(KERN_INFO "command = %x\n", command);
- printk(KERN_INFO "irq = %x\n", h->pdev->irq);
- printk(KERN_INFO "board_id = %x\n", h->board_id);
-#endif /* CCISS_DEBUG */
+ dev_dbg(&h->pdev->dev, "irq = %x\n", h->pdev->irq);
+ dev_dbg(&h->pdev->dev, "board_id = %x\n", h->board_id);
/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
* else we use the IO-APIC interrupt assigned to us by system ROM.
@@ -4251,7 +4216,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *h)
err = cciss_find_cfgtables(h);
if (err)
goto err_out_free_res;
- print_cfg_table(h->cfgtable);
+ print_cfg_table(h);
cciss_find_board_params(h);
if (!CISS_signature_present(h)) {
@@ -4281,7 +4246,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *h)
/* Function to find the first free pointer into our hba[] array
* Returns -1 if no free entries are left.
*/
-static int alloc_cciss_hba(void)
+static int alloc_cciss_hba(struct pci_dev *pdev)
{
int i;
@@ -4296,11 +4261,11 @@ static int alloc_cciss_hba(void)
return i;
}
}
- printk(KERN_WARNING "cciss: This driver supports a maximum"
+ dev_warn(&pdev->dev, "This driver supports a maximum"
" of %d controllers.\n", MAX_CTLR);
return -1;
Enomem:
- printk(KERN_ERR "cciss: out of memory.\n");
+ dev_warn(&pdev->dev, "out of memory.\n");
return -1;
}
@@ -4388,7 +4353,8 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u
/* we leak the DMA buffer here ... no choice since the controller could
still complete the command. */
if (i == 10) {
- printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+ dev_err(&pdev->dev,
+ "controller message %02x:%02x timed out\n",
opcode, type);
return -ETIMEDOUT;
}
@@ -4396,12 +4362,12 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u
pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
if (tag & 2) {
- printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+ dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
opcode, type);
return -EIO;
}
- printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+ dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
opcode, type);
return 0;
}
@@ -4422,7 +4388,7 @@ static __devinit int cciss_reset_msi(struct pci_dev *pdev)
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSI_FLAGS_ENABLE) {
- printk(KERN_INFO "cciss: resetting MSI\n");
+ dev_info(&pdev->dev, "resetting MSI\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
}
}
@@ -4431,7 +4397,7 @@ static __devinit int cciss_reset_msi(struct pci_dev *pdev)
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSIX_FLAGS_ENABLE) {
- printk(KERN_INFO "cciss: resetting MSI-X\n");
+ dev_info(&pdev->dev, "resetting MSI-X\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
}
}
@@ -4664,7 +4630,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
rc = cciss_init_reset_devices(pdev);
if (rc)
return rc;
- i = alloc_cciss_hba();
+ i = alloc_cciss_hba(pdev);
if (i < 0)
return -1;
@@ -4692,7 +4658,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
dac = 0;
else {
- printk(KERN_ERR "cciss: no suitable DMA available\n");
+ dev_err(&h->pdev->dev, "no suitable DMA available\n");
goto clean1;
}
@@ -4705,8 +4671,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
h->major = COMPAQ_CISS_MAJOR + i;
rc = register_blkdev(h->major, h->devname);
if (rc == -EBUSY || rc == -EINVAL) {
- printk(KERN_ERR
- "cciss: Unable to get major number %d for %s "
+ dev_err(&h->pdev->dev,
+ "Unable to get major number %d for %s "
"on hba %d\n", h->major, h->devname, i);
goto clean1;
} else {
@@ -4720,20 +4686,20 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
if (request_irq(h->intr[PERF_MODE_INT],
do_cciss_msix_intr,
IRQF_DISABLED, h->devname, h)) {
- printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
+ dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
h->intr[PERF_MODE_INT], h->devname);
goto clean2;
}
} else {
if (request_irq(h->intr[PERF_MODE_INT], do_cciss_intx,
IRQF_DISABLED, h->devname, h)) {
- printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
+ dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
h->intr[PERF_MODE_INT], h->devname);
goto clean2;
}
}
- printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
+ dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
h->devname, pdev->device, pci_name(pdev),
h->intr[PERF_MODE_INT], dac ? "" : " not");
@@ -4751,7 +4717,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
if ((h->cmd_pool_bits == NULL)
|| (h->cmd_pool == NULL)
|| (h->errinfo_pool == NULL)) {
- printk(KERN_ERR "cciss: out of memory");
+ dev_err(&h->pdev->dev, "out of memory");
goto clean4;
}
@@ -4764,8 +4730,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
h->maxsgentries,
GFP_KERNEL);
if (h->scatter_list[k] == NULL) {
- printk(KERN_ERR "cciss%d: could not allocate "
- "s/g lists\n", i);
+ dev_err(&h->pdev->dev,
+ "could not allocate s/g lists\n");
goto clean4;
}
}
@@ -4800,7 +4766,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
/* Get the firmware version */
inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
if (inq_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
goto clean4;
}
@@ -4812,7 +4778,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
h->firm_ver[2] = inq_buff->data_byte[34];
h->firm_ver[3] = inq_buff->data_byte[35];
} else { /* send command failed */
- printk(KERN_WARNING "cciss: unable to determine firmware"
+ dev_warn(&h->pdev->dev, "unable to determine firmware"
" version of controller\n");
}
kfree(inq_buff);
@@ -4869,9 +4835,7 @@ static void cciss_shutdown(struct pci_dev *pdev)
h = pci_get_drvdata(pdev);
flush_buf = kzalloc(4, GFP_KERNEL);
if (!flush_buf) {
- printk(KERN_WARNING
- "cciss:%d cache not flushed, out of memory.\n",
- h->ctlr);
+ dev_warn(&h->pdev->dev, "cache not flushed, out of memory.\n");
return;
}
/* write all data in the battery backed cache to disk */
@@ -4880,8 +4844,7 @@ static void cciss_shutdown(struct pci_dev *pdev)
4, 0, CTLR_LUNID, TYPE_CMD);
kfree(flush_buf);
if (return_code != IO_OK)
- printk(KERN_WARNING "cciss%d: Error flushing cache\n",
- h->ctlr);
+ dev_warn(&h->pdev->dev, "Error flushing cache\n");
h->access.set_intr_mask(h, CCISS_INTR_OFF);
free_irq(h->intr[PERF_MODE_INT], h);
}
@@ -4892,15 +4855,14 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
int i, j;
if (pci_get_drvdata(pdev) == NULL) {
- printk(KERN_ERR "cciss: Unable to remove device \n");
+ dev_err(&pdev->dev, "Unable to remove device\n");
return;
}
h = pci_get_drvdata(pdev);
i = h->ctlr;
if (hba[i] == NULL) {
- printk(KERN_ERR "cciss: device appears to "
- "already be removed\n");
+ dev_err(&pdev->dev, "device appears to already be removed\n");
return;
}
@@ -5021,8 +4983,8 @@ static void __exit cciss_cleanup(void)
/* double check that all controller entrys have been removed */
for (i = 0; i < MAX_CTLR; i++) {
if (hba[i] != NULL) {
- printk(KERN_WARNING "cciss: had to remove"
- " controller %d\n", i);
+ dev_warn(&hba[i]->pdev->dev,
+ "had to remove controller\n");
cciss_remove_one(hba[i]->pdev);
}
}
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 9fe0d8ffc90de..575495f3c4b87 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -192,7 +192,8 @@ scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
stk = &sa->cmd_stack;
stk->top++;
if (stk->top >= CMD_STACK_SIZE) {
- printk("cciss: scsi_cmd_free called too many times.\n");
+ dev_err(&h->pdev->dev,
+ "scsi_cmd_free called too many times.\n");
BUG();
}
stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) c;
@@ -245,10 +246,9 @@ scsi_cmd_stack_free(ctlr_info_t *h)
sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top != CMD_STACK_SIZE-1) {
- printk( "cciss: %d scsi commands are still outstanding.\n",
+ dev_warn(&h->pdev->dev,
+ "bug: %d scsi commands are still outstanding.\n",
CMD_STACK_SIZE - stk->top);
- // BUG();
- printk("WE HAVE A BUG HERE!!! stk=0x%p\n", stk);
}
size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
@@ -382,8 +382,8 @@ cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
unsigned char addr1[8], addr2[8];
if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
- printk("cciss%d: Too many devices, "
- "some will be inaccessible.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "Too many devices, "
+ "some will be inaccessible.\n");
return -1;
}
@@ -439,8 +439,8 @@ cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
know our hostno and we don't want to print anything first
time anyway (the scsi layer's inquiries will show that info) */
if (hostno != -1)
- printk("cciss%d: %s device c%db%dt%dl%d added.\n",
- h->ctlr, scsi_device_type(sd->devtype), hostno,
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
+ scsi_device_type(sd->devtype), hostno,
sd->bus, sd->target, sd->lun);
return 0;
}
@@ -462,8 +462,8 @@ cciss_scsi_remove_entry(ctlr_info_t *h, int hostno, int entry,
for (i = entry; i < ccissscsi[h->ctlr].ndevices-1; i++)
ccissscsi[h->ctlr].dev[i] = ccissscsi[h->ctlr].dev[i+1];
ccissscsi[h->ctlr].ndevices--;
- printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- h->ctlr, scsi_device_type(sd.devtype), hostno,
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
+ scsi_device_type(sd.devtype), hostno,
sd.bus, sd.target, sd.lun);
}
@@ -536,8 +536,8 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
GFP_KERNEL);
if (!added || !removed) {
- printk(KERN_WARNING "cciss%d: Out of memory in "
- "adjust_cciss_scsi_table\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "Out of memory in adjust_cciss_scsi_table\n");
goto free_and_out;
}
@@ -568,17 +568,14 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
if (found == 0) { /* device no longer present. */
changes++;
- /* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- h->ctlr, scsi_device_type(csd->devtype), hostno,
- csd->bus, csd->target, csd->lun); */
cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
/* remove ^^^, hence i not incremented */
} else if (found == 1) { /* device is different in some way */
changes++;
- printk("cciss%d: device c%db%dt%dl%d has changed.\n",
- h->ctlr, hostno,
- csd->bus, csd->target, csd->lun);
+ dev_info(&h->pdev->dev,
+ "device c%db%dt%dl%d has changed.\n",
+ hostno, csd->bus, csd->target, csd->lun);
cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
/* remove ^^^, hence i not incremented */
@@ -623,8 +620,8 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
} else if (found == 1) {
/* should never happen... */
changes++;
- printk(KERN_WARNING "cciss%d: device "
- "unexpectedly changed\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "device unexpectedly changed\n");
/* but if it does happen, we just ignore that device */
}
}
@@ -648,9 +645,9 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
/* We don't expect to get here. */
/* future cmds to this device will get selection */
/* timeout as if the device was gone. */
- printk(KERN_WARNING "cciss%d: didn't find "
+ dev_warn(&h->pdev->dev, "didn't find "
"c%db%dt%dl%d\n for removal.",
- h->ctlr, hostno, removed[i].bus,
+ hostno, removed[i].bus,
removed[i].target, removed[i].lun);
}
}
@@ -662,10 +659,9 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
added[i].target, added[i].lun);
if (rc == 0)
continue;
- printk(KERN_WARNING "cciss%d: scsi_add_device "
+ dev_warn(&h->pdev->dev, "scsi_add_device "
"c%db%dt%dl%d failed, device not added.\n",
- h->ctlr, hostno,
- added[i].bus, added[i].target, added[i].lun);
+ hostno, added[i].bus, added[i].target, added[i].lun);
/* now we have to remove it from ccissscsi, */
/* since it didn't get added to scsi mid layer */
fixup_botched_add(h, added[i].scsi3addr);
@@ -788,7 +784,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout,
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: %p has"
+ dev_warn(&h->pdev->dev, "%p has"
" completed with data overrun "
"reported\n", c);
break;
@@ -804,43 +800,41 @@ static void complete_scsi_command(CommandList_struct *c, int timeout,
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: %p has "
- "protocol error\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p has protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: %p had "
- " hardware error\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p had hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: %p had "
- "connection lost\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p had connection lost\n", c);
break;
case CMD_ABORTED:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: %p was "
- "aborted\n", c);
+ dev_warn(&h->pdev->dev, "%p was aborted\n", c);
break;
case CMD_ABORT_FAILED:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: %p reports "
- "abort failed\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p reports abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: %p aborted "
- "do to an unsolicited abort\n", c);
+ dev_warn(&h->pdev->dev, "%p aborted do to an "
+ "unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
cmd->result = DID_TIME_OUT << 16;
- printk(KERN_WARNING "cciss: %p timedout\n",
- c);
+ dev_warn(&h->pdev->dev, "%p timedout\n", c);
break;
default:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: %p returned "
- "unknown status %x\n", c,
+ dev_warn(&h->pdev->dev,
+ "%p returned unknown status %x\n", c,
ei->CommandStatus);
}
}
@@ -956,7 +950,7 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *h,
}
static void
-cciss_scsi_interpret_error(CommandList_struct *c)
+cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c)
{
ErrorInfo_struct *ei;
@@ -964,67 +958,64 @@ cciss_scsi_interpret_error(CommandList_struct *c)
switch(ei->CommandStatus)
{
case CMD_TARGET_STATUS:
- printk(KERN_WARNING "cciss: cmd %p has "
- "completed with errors\n", c);
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- c, ei->ScsiStatus);
+ dev_warn(&h->pdev->dev,
+ "cmd %p has completed with errors\n", c);
+ dev_warn(&h->pdev->dev,
+ "cmd %p has SCSI Status = %x\n",
+ c, ei->ScsiStatus);
if (ei->ScsiStatus == 0)
- printk(KERN_WARNING
- "cciss:SCSI status is abnormally zero. "
+ dev_warn(&h->pdev->dev,
+ "SCSI status is abnormally zero. "
"(probably indicates selection timeout "
"reported incorrectly due to a known "
"firmware bug, circa July, 2001.)\n");
break;
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
- printk("UNDERRUN\n");
+ dev_info(&h->pdev->dev, "UNDERRUN\n");
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: %p has"
+ dev_warn(&h->pdev->dev, "%p has"
" completed with data overrun "
"reported\n", c);
break;
case CMD_INVALID: {
/* controller unfortunately reports SCSI passthru's */
/* to non-existent targets as invalid commands. */
- printk(KERN_WARNING "cciss: %p is "
- "reported invalid (probably means "
+ dev_warn(&h->pdev->dev,
+ "%p is reported invalid (probably means "
"target device no longer present)\n", c);
/* print_bytes((unsigned char *) c, sizeof(*c), 1, 0);
print_cmd(c); */
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: %p has "
- "protocol error\n", c);
+ dev_warn(&h->pdev->dev, "%p has protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
/* cmd->result = DID_ERROR << 16; */
- printk(KERN_WARNING "cciss: %p had "
- " hardware error\n", c);
+ dev_warn(&h->pdev->dev, "%p had hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: %p had "
- "connection lost\n", c);
+ dev_warn(&h->pdev->dev, "%p had connection lost\n", c);
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: %p was "
- "aborted\n", c);
+ dev_warn(&h->pdev->dev, "%p was aborted\n", c);
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: %p reports "
- "abort failed\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p reports abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss: %p aborted "
- "do to an unsolicited abort\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p aborted do to an unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: %p timedout\n", c);
+ dev_warn(&h->pdev->dev, "%p timedout\n", c);
break;
default:
- printk(KERN_WARNING "cciss: %p returned "
- "unknown status %x\n", c, ei->CommandStatus);
+ dev_warn(&h->pdev->dev,
+ "%p returned unknown status %x\n",
+ c, ei->CommandStatus);
}
}
@@ -1063,7 +1054,7 @@ cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr,
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(c);
+ cciss_scsi_interpret_error(h, c);
rc = -1;
}
spin_lock_irqsave(&h->lock, flags);
@@ -1134,7 +1125,7 @@ cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
ei = c->err_info;
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(c);
+ cciss_scsi_interpret_error(h, c);
rc = -1;
}
spin_lock_irqsave(&h->lock, flags);
@@ -1446,7 +1437,7 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
c = scsi_cmd_alloc(h);
spin_unlock_irqrestore(&h->lock, flags);
if (c == NULL) { /* trouble... */
- printk("scsi_cmd_alloc returned NULL!\n");
+ dev_warn(&h->pdev->dev, "scsi_cmd_alloc returned NULL!\n");
/* FIXME: next 3 lines are -> BAD! <- */
cmd->result = DID_NO_CONNECT << 16;
done(cmd);
@@ -1502,7 +1493,7 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
break;
default:
- printk("cciss: unknown data direction: %d\n",
+ dev_warn(&h->pdev->dev, "unknown data direction: %d\n",
cmd->sc_data_direction);
BUG();
break;
@@ -1552,8 +1543,7 @@ static int cciss_engage_scsi(ctlr_info_t *h)
stk = &sa->cmd_stack;
if (sa->registered) {
- printk(KERN_INFO "cciss%d: SCSI subsystem already engaged.\n",
- h->ctlr);
+ dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n");
spin_unlock_irqrestore(&h->lock, flags);
return -ENXIO;
}
@@ -1586,8 +1576,8 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h,
c = cmd_alloc(h);
if (!c) {
- printk(KERN_WARNING "cciss%d: out of memory in "
- "wait_for_device_to_become_ready.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "out of memory in "
+ "wait_for_device_to_become_ready.\n");
return IO_ERROR;
}
@@ -1631,16 +1621,16 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h,
}
}
retry_tur:
- printk(KERN_WARNING "cciss%d: Waiting %d secs "
+ dev_warn(&h->pdev->dev, "Waiting %d secs "
"for device to become ready.\n",
- h->ctlr, waittime / HZ);
+ waittime / HZ);
rc = 1; /* device not ready. */
}
if (rc)
- printk("cciss%d: giving up on device.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "giving up on device.\n");
else
- printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "device is ready.\n");
cmd_free(h, c);
return rc;
@@ -1668,8 +1658,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
if (h == NULL) /* paranoia */
return FAILED;
- printk(KERN_WARNING
- "cciss%d: resetting tape drive or medium changer.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "resetting tape drive or medium changer.\n");
/* find the command that's giving us trouble */
cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_in_trouble == NULL) /* paranoia */
@@ -1680,7 +1669,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
TYPE_MSG);
if (rc == 0 && wait_for_device_to_become_ready(h, lunaddr) == 0)
return SUCCESS;
- printk(KERN_WARNING "cciss%d: resetting device failed.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "resetting device failed.\n");
return FAILED;
}
@@ -1695,7 +1684,7 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
if (h == NULL) /* paranoia */
return FAILED;
- printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "aborting tardy SCSI cmd\n");
/* find the command to be aborted */
cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
--
GitLab
From 8112586063fe53958d60218631d661533f304504 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 19 Jul 2010 13:46:54 -0500
Subject: [PATCH 369/863] cciss: cleanup interrupt_not_for_us
cciss: cleanup interrupt_not_for_us
In the case of MSI/MSIX interrutps, we don't need to check
if the interrupt is for us, and in the case of the intx interrupt
handler, when checking if the interrupt is for us, we don't need
to check if we're using MSI/MSIX, we know we're not.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cciss.c | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 35a9f08cf74fc..fdf1b79eb3474 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3376,8 +3376,7 @@ static inline int interrupt_pending(ctlr_info_t *h)
static inline long interrupt_not_for_us(ctlr_info_t *h)
{
- return !(h->msi_vector || h->msix_vector) &&
- ((h->access.intr_pending(h) == 0) ||
+ return ((h->access.intr_pending(h) == 0) ||
(h->interrupts_enabled == 0));
}
@@ -3470,10 +3469,6 @@ static irqreturn_t do_cciss_intx(int irq, void *dev_id)
if (interrupt_not_for_us(h))
return IRQ_NONE;
- /*
- * If there are completed commands in the completion queue,
- * we had better do something about it.
- */
spin_lock_irqsave(&h->lock, flags);
while (interrupt_pending(h)) {
raw_tag = get_next_completion(h);
@@ -3484,7 +3479,6 @@ static irqreturn_t do_cciss_intx(int irq, void *dev_id)
raw_tag = process_nonindexed_cmd(h, raw_tag);
}
}
-
spin_unlock_irqrestore(&h->lock, flags);
return IRQ_HANDLED;
}
@@ -3498,12 +3492,6 @@ static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id)
unsigned long flags;
u32 raw_tag;
- if (interrupt_not_for_us(h))
- return IRQ_NONE;
- /*
- * If there are completed commands in the completion queue,
- * we had better do something about it.
- */
spin_lock_irqsave(&h->lock, flags);
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY) {
@@ -3512,7 +3500,6 @@ static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id)
else
raw_tag = process_nonindexed_cmd(h, raw_tag);
}
-
spin_unlock_irqrestore(&h->lock, flags);
return IRQ_HANDLED;
}
--
GitLab
From 6a32a8aed509e71137043d464db4a7fcd88c903e Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Wed, 21 Jul 2010 10:29:37 +0900
Subject: [PATCH 370/863] scsi: convert discard to REQ_TYPE_FS from
REQ_TYPE_BLOCK_PC
Jens, any reason why this isn't included in your for-2.6.36 yet?
=
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Subject: [PATCH resend] scsi: convert discard to REQ_TYPE_FS from REQ_TYPE_BLOCK_PC
The block layer (file systems) sends discard requests as REQ_TYPE_FS
(the role of REQ_TYPE_FS is that setting up commands and interpreting
the results). But SCSI-ml treats discard requests as
REQ_TYPE_BLOCK_PC.
scsi-ml can handle discard requests as REQ_TYPE_FS
easily. scsi_setup_discard_cmnd() sets up struct request and the bio
nicely. Only remaining issue is that discard requests can't be
completed partially so we need to modify sd_done.
This conversion also fixes the problem that discard requests aren't
retried when possible (e.g. UNIT ATTENTION).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/sd.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index fc5d69a84af5f..e63b85ac8cd12 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -434,7 +434,6 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
nr_sectors >>= 3;
}
- rq->cmd_type = REQ_TYPE_BLOCK_PC;
rq->timeout = SD_TIMEOUT;
memset(rq->cmd, 0, rq->cmd_len);
@@ -1200,6 +1199,12 @@ static int sd_done(struct scsi_cmnd *SCpnt)
int sense_valid = 0;
int sense_deferred = 0;
+ if (SCpnt->request->cmd_flags & REQ_DISCARD) {
+ if (!result)
+ scsi_set_resid(SCpnt, 0);
+ return good_bytes;
+ }
+
if (result) {
sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
if (sense_valid)
--
GitLab
From ad96a7a7ea950d5bc9755f2f568be185c7070f1e Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 20 Jul 2010 20:08:59 -0600
Subject: [PATCH 371/863] drivers/block: use memdup_user
Use memdup_user when user data is immediately copied into the
allocated region. Some checkpatch cleanups in nearby code.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@
- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+ to = memdup_user(from,size);
if (
- to==NULL
+ IS_ERR(to)
|| ...) {
<+... when != goto l1;
- -ENOMEM
+ PTR_ERR(to)
...+>
}
- if (copy_from_user(to, from, size) != 0) {
- <+... when != goto l2;
- -EFAULT
- ...+>
- }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chirag Kantharia <chirag.kantharia@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cpqarray.c | 32 ++++++++++----------------------
1 file changed, 10 insertions(+), 22 deletions(-)
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 28937b6615642..9473215956f93 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -1255,17 +1255,11 @@ static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io)
/* Pre submit processing */
switch(io->cmd) {
case PASSTHRU_A:
- p = kmalloc(io->sg[0].size, GFP_KERNEL);
- if (!p)
- {
- error = -ENOMEM;
- cmd_free(h, c, 0);
- return(error);
- }
- if (copy_from_user(p, io->sg[0].addr, io->sg[0].size)) {
- kfree(p);
- cmd_free(h, c, 0);
- return -EFAULT;
+ p = memdup_user(io->sg[0].addr, io->sg[0].size);
+ if (IS_ERR(p)) {
+ error = PTR_ERR(p);
+ cmd_free(h, c, 0);
+ return error;
}
c->req.hdr.blk = pci_map_single(h->pci_dev, &(io->c),
sizeof(ida_ioctl_t),
@@ -1296,18 +1290,12 @@ static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io)
case DIAG_PASS_THRU:
case COLLECT_BUFFER:
case WRITE_FLASH_ROM:
- p = kmalloc(io->sg[0].size, GFP_KERNEL);
- if (!p)
- {
- error = -ENOMEM;
- cmd_free(h, c, 0);
- return(error);
+ p = memdup_user(io->sg[0].addr, io->sg[0].size);
+ if (IS_ERR(p)) {
+ error = PTR_ERR(p);
+ cmd_free(h, c, 0);
+ return error;
}
- if (copy_from_user(p, io->sg[0].addr, io->sg[0].size)) {
- kfree(p);
- cmd_free(h, c, 0);
- return -EFAULT;
- }
c->req.sg[0].size = io->sg[0].size;
c->req.sg[0].addr = pci_map_single(h->pci_dev, p,
c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL);
--
GitLab
From 3b06c21e8462b77186613e70db286cfa8616088b Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 20 Jul 2010 20:09:00 -0600
Subject: [PATCH 372/863] floppy: make controller const
The struct cont_t is just a set of virtual function pointers.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/floppy.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 3126d5122b2b1..cf04c1b234ed1 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -538,7 +538,7 @@ static int max_buffer_sectors;
static int *errors;
typedef void (*done_f)(int);
-static struct cont_t {
+static const struct cont_t {
void (*interrupt)(void);
/* this is called after the interrupt of the
* main command */
@@ -1970,14 +1970,14 @@ static void do_wakeup(void)
wake_up(&command_done);
}
-static struct cont_t wakeup_cont = {
+static const struct cont_t wakeup_cont = {
.interrupt = empty,
.redo = do_wakeup,
.error = empty,
.done = (done_f)empty
};
-static struct cont_t intr_cont = {
+static const struct cont_t intr_cont = {
.interrupt = empty,
.redo = process_fd_request,
.error = empty,
@@ -2183,7 +2183,7 @@ static void redo_format(void)
debugt(__func__, "queue format request");
}
-static struct cont_t format_cont = {
+static const struct cont_t format_cont = {
.interrupt = format_interrupt,
.redo = redo_format,
.error = bad_flp_intr,
@@ -2879,7 +2879,7 @@ static void redo_fd_request(void)
return;
}
-static struct cont_t rw_cont = {
+static const struct cont_t rw_cont = {
.interrupt = rw_interrupt,
.redo = redo_fd_request,
.error = bad_flp_intr,
@@ -2915,7 +2915,7 @@ static void do_fd_request(struct request_queue *q)
is_alive(__func__, "");
}
-static struct cont_t poll_cont = {
+static const struct cont_t poll_cont = {
.interrupt = success_and_wakeup,
.redo = floppy_ready,
.error = generic_failure,
@@ -2946,7 +2946,7 @@ static void reset_intr(void)
pr_info("weird, reset interrupt called\n");
}
-static struct cont_t reset_cont = {
+static const struct cont_t reset_cont = {
.interrupt = reset_intr,
.redo = success_and_wakeup,
.error = generic_failure,
@@ -3051,7 +3051,7 @@ static void raw_cmd_done(int flag)
generic_done(flag);
}
-static struct cont_t raw_cmd_cont = {
+static const struct cont_t raw_cmd_cont = {
.interrupt = success_and_wakeup,
.redo = floppy_start,
.error = generic_failure,
--
GitLab
From 28e18d0188b9e3ab82ebd09d9b1d1c7f8d1822aa Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 9 Jul 2010 09:38:24 +0900
Subject: [PATCH 373/863] block: set REQ_TYPE_FS on flush requests
the block layer doesn't set rq->cmd_type on flush requests. By
definition, it should be REQ_TYPE_FS (the lower layers build a command
and interpret the result of it, that is, the block layer doesn't know
the details).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-barrier.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 557f69360b6a0..d95a1440e29da 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -134,6 +134,7 @@ static void queue_flush(struct request_queue *q, unsigned which)
}
blk_rq_init(q, rq);
+ rq->cmd_type = REQ_TYPE_FS;
rq->cmd_flags = REQ_HARDBARRIER | REQ_FLUSH;
rq->rq_disk = q->bar_rq.rq_disk;
rq->end_io = end_io;
--
GitLab
From 16f2319fd67b169c0b34391d3fa0870fff129891 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 9 Jul 2010 09:38:25 +0900
Subject: [PATCH 374/863] block: set up rq->rq_disk properly for flush requests
q->bar_rq.rq_disk is NULL. Use the rq_disk of the original request
instead.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-barrier.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index d95a1440e29da..f0faefca032ff 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -136,7 +136,7 @@ static void queue_flush(struct request_queue *q, unsigned which)
blk_rq_init(q, rq);
rq->cmd_type = REQ_TYPE_FS;
rq->cmd_flags = REQ_HARDBARRIER | REQ_FLUSH;
- rq->rq_disk = q->bar_rq.rq_disk;
+ rq->rq_disk = q->orig_bar_rq->rq_disk;
rq->end_io = end_io;
elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
--
GitLab
From e96f6abe02fc3320d669985443e8c68ff8e83294 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 9 Jul 2010 09:38:26 +0900
Subject: [PATCH 375/863] scsi: use REQ_TYPE_FS for flush request
scsi-ml uses REQ_TYPE_BLOCK_PC for flush requests from file
systems. The definition of REQ_TYPE_BLOCK_PC is that we don't retry
requests even when we can (e.g. UNIT ATTENTION) and we send the
response to the callers (then the callers can decide what they want).
We need a workaround such as the commit
77a4229719e511a0d38d9c355317ae1469adeb54 to retry BLOCK_PC flush
requests. We will need the similar workaround for discard requests too
since SCSI-ml handle them as BLOCK_PC internally.
This uses REQ_TYPE_FS for flush requests from file systems instead of
REQ_TYPE_BLOCK_PC.
scsi-ml retries only REQ_TYPE_FS requests that have data to
transfer when we can retry them (e.g. UNIT_ATTENTION). However, we
also need to retry REQ_TYPE_FS requests without data because the
callers don't.
This also changes scsi_check_sense() to retry all the REQ_TYPE_FS
requests when appropriate. Thanks to scsi_noretry_cmd(),
REQ_TYPE_BLOCK_PC requests don't be retried as before.
Note that basically, this reverts the commit
77a4229719e511a0d38d9c355317ae1469adeb54 since now we use REQ_TYPE_FS
for flush requests.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/scsi/scsi_error.c | 19 ++++---------------
drivers/scsi/sd.c | 2 --
2 files changed, 4 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 1b88af89d0c7f..2768bf6ffe59e 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -307,20 +307,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
(sshdr.asc == 0x04) && (sshdr.ascq == 0x02))
return FAILED;
- if (scmd->request->cmd_flags & REQ_HARDBARRIER)
- /*
- * barrier requests should always retry on UA
- * otherwise block will get a spurious error
- */
- return NEEDS_RETRY;
- else
- /*
- * for normal (non barrier) commands, pass the
- * UA upwards for a determination in the
- * completion functions
- */
- return SUCCESS;
-
+ return NEEDS_RETRY;
/* these three are not supported */
case COPY_ABORTED:
case VOLUME_OVERFLOW:
@@ -1336,7 +1323,9 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
* assume caller has checked sense and determinted
* the check condition was retryable.
*/
- return (scmd->request->cmd_flags & REQ_FAILFAST_DEV);
+ if (scmd->request->cmd_flags & REQ_FAILFAST_DEV ||
+ scmd->request->cmd_type == REQ_TYPE_BLOCK_PC)
+ return 1;
}
return 0;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e63b85ac8cd12..108daead7ae8a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -477,8 +477,6 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
{
- /* for now, we use REQ_TYPE_BLOCK_PC. */
- rq->cmd_type = REQ_TYPE_BLOCK_PC;
rq->timeout = SD_TIMEOUT;
rq->retries = SD_MAX_RETRIES;
rq->cmd[0] = SYNCHRONIZE_CACHE;
--
GitLab
From 4dab46ff26c6003a13ec769312c50938b93c359d Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 22 Jul 2010 14:17:00 -0700
Subject: [PATCH 376/863] xen/blkfront: use tagged queuing for barriers
When barriers are supported, then use QUEUE_ORDERED_TAG to tell the block
subsystem that it doesn't need to do anything else with the barriers.
Previously we used ORDERED_DRAIN which caused the block subsystem to
drain all pending IO before submitting the barrier, which would be
very expensive.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index c6727b5cefd6f..6d912ab472929 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -420,9 +420,19 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
static int xlvbd_barrier(struct blkfront_info *info)
{
int err;
+ unsigned ordered = QUEUE_ORDERED_NONE;
- err = blk_queue_ordered(info->rq,
- info->feature_barrier ? QUEUE_ORDERED_DRAIN : QUEUE_ORDERED_NONE);
+ /*
+ * If we don't have barrier support, then there's really no
+ * way to guarantee write ordering, so we really just have to
+ * send writes to the backend and hope for the best. If
+ * barriers are supported then we can treat them as proper
+ * ordering tags.
+ */
+ if (info->feature_barrier)
+ ordered = QUEUE_ORDERED_TAG;
+
+ err = blk_queue_ordered(info->rq, ordered);
if (err)
return err;
@@ -509,8 +519,7 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
info->rq = gd->queue;
info->gd = gd;
- if (info->feature_barrier)
- xlvbd_barrier(info);
+ xlvbd_barrier(info);
if (vdisk_info & VDISK_READONLY)
set_disk_ro(gd, 1);
--
GitLab
From 7901d14144311c930918b1222aae7611284c63eb Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 28 Jul 2010 10:49:29 -0700
Subject: [PATCH 377/863] xen/blkfront: Use QUEUE_ORDERED_DRAIN for old
backends
If there's no feature-barrier key in xenstore, then it means its a fairly
old backend which does uncached in-order writes, which means ORDERED_DRAIN
is appropriate.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
drivers/block/xen-blkfront.c | 45 +++++++++++++++++++++++-------------
1 file changed, 29 insertions(+), 16 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 6d912ab472929..ae5f92b5752e8 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -420,26 +420,22 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
static int xlvbd_barrier(struct blkfront_info *info)
{
int err;
- unsigned ordered = QUEUE_ORDERED_NONE;
+ const char *barrier;
- /*
- * If we don't have barrier support, then there's really no
- * way to guarantee write ordering, so we really just have to
- * send writes to the backend and hope for the best. If
- * barriers are supported then we can treat them as proper
- * ordering tags.
- */
- if (info->feature_barrier)
- ordered = QUEUE_ORDERED_TAG;
+ switch (info->feature_barrier) {
+ case QUEUE_ORDERED_DRAIN: barrier = "enabled (drain)"; break;
+ case QUEUE_ORDERED_TAG: barrier = "enabled (tag)"; break;
+ case QUEUE_ORDERED_NONE: barrier = "disabled"; break;
+ default: return -EINVAL;
+ }
- err = blk_queue_ordered(info->rq, ordered);
+ err = blk_queue_ordered(info->rq, info->feature_barrier);
if (err)
return err;
printk(KERN_INFO "blkfront: %s: barriers %s\n",
- info->gd->disk_name,
- info->feature_barrier ? "enabled" : "disabled");
+ info->gd->disk_name, barrier);
return 0;
}
@@ -665,7 +661,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
info->gd->disk_name);
error = -EOPNOTSUPP;
- info->feature_barrier = 0;
+ info->feature_barrier = QUEUE_ORDERED_NONE;
xlvbd_barrier(info);
}
/* fall through */
@@ -1003,6 +999,7 @@ static void blkfront_connect(struct blkfront_info *info)
unsigned long sector_size;
unsigned int binfo;
int err;
+ int barrier;
switch (info->connected) {
case BLKIF_STATE_CONNECTED:
@@ -1043,10 +1040,26 @@ static void blkfront_connect(struct blkfront_info *info)
}
err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
- "feature-barrier", "%lu", &info->feature_barrier,
+ "feature-barrier", "%lu", &barrier,
NULL);
+
+ /*
+ * If there's no "feature-barrier" defined, then it means
+ * we're dealing with a very old backend which writes
+ * synchronously; draining will do what needs to get done.
+ *
+ * If there are barriers, then we can do full queued writes
+ * with tagged barriers.
+ *
+ * If barriers are not supported, then there's no much we can
+ * do, so just set ordering to NONE.
+ */
if (err)
- info->feature_barrier = 0;
+ info->feature_barrier = QUEUE_ORDERED_DRAIN;
+ else if (barrier)
+ info->feature_barrier = QUEUE_ORDERED_TAG;
+ else
+ info->feature_barrier = QUEUE_ORDERED_NONE;
err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
if (err) {
--
GitLab
From 6965031d331a642e31278fa1b5bd47f372ffdd5d Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <miklos@szeredi.hu>
Date: Tue, 3 Aug 2010 12:48:50 +0200
Subject: [PATCH 378/863] splice: fix misuse of SPLICE_F_NONBLOCK
SPLICE_F_NONBLOCK is clearly documented to only affect blocking on the
pipe. In __generic_file_splice_read(), however, it causes an EAGAIN
if the page is currently being read.
This makes it impossible to write an application that only wants
failure if the pipe is full. For example if the same process is
handling both ends of a pipe and isn't otherwise able to determine
whether a splice to the pipe will fill it or not.
We could make the read non-blocking on O_NONBLOCK or some other splice
flag, but for now this is the simplest fix.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/splice.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/fs/splice.c b/fs/splice.c
index ec11c52d646d0..8f1dfaecc8f06 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -399,17 +399,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos,
* If the page isn't uptodate, we may need to start io on it
*/
if (!PageUptodate(page)) {
- /*
- * If in nonblock mode then dont block on waiting
- * for an in-flight io page
- */
- if (flags & SPLICE_F_NONBLOCK) {
- if (!trylock_page(page)) {
- error = -EAGAIN;
- break;
- }
- } else
- lock_page(page);
+ lock_page(page);
/*
* Page was truncated, or invalidated by the
--
GitLab
From 08852b6d6c40f387f2b75e199e2ca1df68970f4c Mon Sep 17 00:00:00 2001
From: Minchan Kim <minchan.kim@gmail.com>
Date: Tue, 3 Aug 2010 12:51:16 +0200
Subject: [PATCH 379/863] writeback: remove wb in get_next_work_item
83ba7b07 cleans up the writeback.
So we don't use wb any more in get_next_work_item.
Let's remove unnecessary argument.
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index bf10cbf379dd0..261570deb22c9 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -704,7 +704,7 @@ static long wb_writeback(struct bdi_writeback *wb,
* Return the next wb_writeback_work struct that hasn't been processed yet.
*/
static struct wb_writeback_work *
-get_next_work_item(struct backing_dev_info *bdi, struct bdi_writeback *wb)
+get_next_work_item(struct backing_dev_info *bdi)
{
struct wb_writeback_work *work = NULL;
@@ -762,7 +762,7 @@ long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
struct wb_writeback_work *work;
long wrote = 0;
- while ((work = get_next_work_item(bdi, wb)) != NULL) {
+ while ((work = get_next_work_item(bdi)) != NULL) {
/*
* Override sync mode, in case we must wait for completion
* because this thread is exiting now.
--
GitLab
From f6c4c8e19a087dae7dc651ccbd1ff8b843eedee2 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Tue, 3 Aug 2010 12:52:55 +0200
Subject: [PATCH 380/863] cpqarray: check put_user() result
put_user() may fail, if so return -EFAULT.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/cpqarray.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 9473215956f93..d53b0291c44ba 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -1179,7 +1179,8 @@ static int ida_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned in
return error;
case IDAGETCTLRSIG:
if (!arg) return -EINVAL;
- put_user(host->ctlr_sig, (int __user *)arg);
+ if (put_user(host->ctlr_sig, (int __user *)arg))
+ return -EFAULT;
return 0;
case IDAREVALIDATEVOLS:
if (MINOR(bdev->bd_dev) != 0)
@@ -1187,7 +1188,8 @@ static int ida_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned in
return revalidate_allvol(host);
case IDADRIVERVERSION:
if (!arg) return -EINVAL;
- put_user(DRIVER_VERSION, (unsigned long __user *)arg);
+ if (put_user(DRIVER_VERSION, (unsigned long __user *)arg))
+ return -EFAULT;
return 0;
case IDAGETPCIINFO:
{
--
GitLab
From edca4a380584a65a16839bdee33ec82244f0f88e Mon Sep 17 00:00:00 2001
From: Mike Snitzer <snitzer@redhat.com>
Date: Tue, 3 Aug 2010 12:54:51 +0200
Subject: [PATCH 381/863] block: disallow FS recursion from sb_issue_discard
allocation
Filesystems can call sb_issue_discard on a memory reclaim path
(e.g. ext4 calls sb_issue_discard during journal commit).
Use GFP_NOFS in sb_issue_discard to avoid recursing back into the FS.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/blkdev.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index a8b05fc80c6db..89c855c5655c8 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -933,7 +933,7 @@ static inline int sb_issue_discard(struct super_block *sb,
{
block <<= (sb->s_blocksize_bits - 9);
nr_blocks <<= (sb->s_blocksize_bits - 9);
- return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL,
+ return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_NOFS,
BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER);
}
--
GitLab
From aca27ba9618276dd2f777bcd5a1419589ccf1ca8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 3 Aug 2010 13:14:33 +0200
Subject: [PATCH 382/863] bio, fs: update RWA_MASK, READA and SWRITE to match
the corresponding BIO_RW_* bits
Commit a82afdf (block: use the same failfast bits for bio and request)
moved BIO_RW_* bits around such that they match up with REQ_* bits.
Unfortunately, fs.h hard coded RW_MASK, RWA_MASK, READ, WRITE, READA
and SWRITE as 0, 1, 2 and 3, and expected them to match with BIO_RW_*
bits. READ/WRITE didn't change but BIO_RW_AHEAD was moved to bit 4
instead of bit 1, breaking RWA_MASK, READA and SWRITE.
This patch updates RWA_MASK, READA and SWRITE such that they match the
BIO_RW_* bits again. A follow up patch will update the definitions to
directly use BIO_RW_* bits so that this kind of breakage won't happen
again.
Neil also spotted missing RWA_MASK conversion.
Stable: The offending commit a82afdf was released with v2.6.32, so
this patch should be applied to all kernels since then but it must
_NOT_ be applied to kernels earlier than that.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Vladislav Bolkhovitin <vst@vlnb.net>
Root-caused-by: Neil Brown <neilb@suse.de>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/fs.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index c5c92943c7671..55dad7bca25b8 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -145,12 +145,12 @@ struct inodes_stat_t {
*
*/
#define RW_MASK 1
-#define RWA_MASK 2
+#define RWA_MASK 16
#define READ 0
#define WRITE 1
-#define READA 2 /* readahead - don't block if no resources */
-#define SWRITE 3 /* for ll_rw_block() - wait for buffer lock */
+#define READA 16 /* readahead - don't block if no resources */
+#define SWRITE 17 /* for ll_rw_block(), wait for buffer lock */
#define READ_SYNC (READ | REQ_SYNC | REQ_UNPLUG)
#define READ_META (READ | REQ_META)
--
GitLab
From 7cc015811ef8992dfcce314d0ed9642bc18143d1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 3 Aug 2010 13:14:58 +0200
Subject: [PATCH 383/863] bio, fs: separate out bio_types.h and define
READ/WRITE constants in terms of BIO_RW_* flags
linux/fs.h hard coded READ/WRITE constants which should match BIO_RW_*
flags. This is fragile and caused breakage during BIO_RW_* flag
rearrangement. The hardcoding is to avoid include dependency hell.
Create linux/bio_types.h which contatins definitions for bio data
structures and flags and include it from bio.h and fs.h, and make fs.h
define all READ/WRITE related constants in terms of BIO_RW_* flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/bio.h | 183 +-----------------------------------
include/linux/blk_types.h | 193 ++++++++++++++++++++++++++++++++++++++
include/linux/fs.h | 15 ++-
3 files changed, 204 insertions(+), 187 deletions(-)
create mode 100644 include/linux/blk_types.h
diff --git a/include/linux/bio.h b/include/linux/bio.h
index f655b54c9ef3c..5274103434add 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -9,7 +9,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
-
+ *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
@@ -28,6 +28,9 @@
#include <asm/io.h>
+/* struct bio, bio_vec and BIO_* flags are defined in blk_types.h */
+#include <linux/blk_types.h>
+
#define BIO_DEBUG
#ifdef BIO_DEBUG
@@ -40,184 +43,6 @@
#define BIO_MAX_SIZE (BIO_MAX_PAGES << PAGE_CACHE_SHIFT)
#define BIO_MAX_SECTORS (BIO_MAX_SIZE >> 9)
-/*
- * was unsigned short, but we might as well be ready for > 64kB I/O pages
- */
-struct bio_vec {
- struct page *bv_page;
- unsigned int bv_len;
- unsigned int bv_offset;
-};
-
-struct bio_set;
-struct bio;
-struct bio_integrity_payload;
-typedef void (bio_end_io_t) (struct bio *, int);
-typedef void (bio_destructor_t) (struct bio *);
-
-/*
- * main unit of I/O for the block layer and lower layers (ie drivers and
- * stacking drivers)
- */
-struct bio {
- sector_t bi_sector; /* device address in 512 byte
- sectors */
- struct bio *bi_next; /* request queue link */
- struct block_device *bi_bdev;
- unsigned long bi_flags; /* status, command, etc */
- unsigned long bi_rw; /* bottom bits READ/WRITE,
- * top bits priority
- */
-
- unsigned short bi_vcnt; /* how many bio_vec's */
- unsigned short bi_idx; /* current index into bvl_vec */
-
- /* Number of segments in this BIO after
- * physical address coalescing is performed.
- */
- unsigned int bi_phys_segments;
-
- unsigned int bi_size; /* residual I/O count */
-
- /*
- * To keep track of the max segment size, we account for the
- * sizes of the first and last mergeable segments in this bio.
- */
- unsigned int bi_seg_front_size;
- unsigned int bi_seg_back_size;
-
- unsigned int bi_max_vecs; /* max bvl_vecs we can hold */
-
- unsigned int bi_comp_cpu; /* completion CPU */
-
- atomic_t bi_cnt; /* pin count */
-
- struct bio_vec *bi_io_vec; /* the actual vec list */
-
- bio_end_io_t *bi_end_io;
-
- void *bi_private;
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
- struct bio_integrity_payload *bi_integrity; /* data integrity */
-#endif
-
- bio_destructor_t *bi_destructor; /* destructor */
-
- /*
- * We can inline a number of vecs at the end of the bio, to avoid
- * double allocations for a small number of bio_vecs. This member
- * MUST obviously be kept at the very end of the bio.
- */
- struct bio_vec bi_inline_vecs[0];
-};
-
-/*
- * bio flags
- */
-#define BIO_UPTODATE 0 /* ok after I/O completion */
-#define BIO_RW_BLOCK 1 /* RW_AHEAD set, and read/write would block */
-#define BIO_EOF 2 /* out-out-bounds error */
-#define BIO_SEG_VALID 3 /* bi_phys_segments valid */
-#define BIO_CLONED 4 /* doesn't own data */
-#define BIO_BOUNCED 5 /* bio is a bounce bio */
-#define BIO_USER_MAPPED 6 /* contains user pages */
-#define BIO_EOPNOTSUPP 7 /* not supported */
-#define BIO_CPU_AFFINE 8 /* complete bio on same CPU as submitted */
-#define BIO_NULL_MAPPED 9 /* contains invalid user pages */
-#define BIO_FS_INTEGRITY 10 /* fs owns integrity data, not block layer */
-#define BIO_QUIET 11 /* Make BIO Quiet */
-#define bio_flagged(bio, flag) ((bio)->bi_flags & (1 << (flag)))
-
-/*
- * top 4 bits of bio flags indicate the pool this bio came from
- */
-#define BIO_POOL_BITS (4)
-#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1)
-#define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS)
-#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
-#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
-
-/*
- * Request flags. For use in the cmd_flags field of struct request, and in
- * bi_rw of struct bio. Note that some flags are only valid in either one.
- */
-enum rq_flag_bits {
- /* common flags */
- __REQ_WRITE, /* not set, read. set, write */
- __REQ_FAILFAST_DEV, /* no driver retries of device errors */
- __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
- __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */
-
- __REQ_HARDBARRIER, /* may not be passed by drive either */
- __REQ_SYNC, /* request is sync (sync write or read) */
- __REQ_META, /* metadata io request */
- __REQ_DISCARD, /* request to discard sectors */
- __REQ_NOIDLE, /* don't anticipate more IO after this one */
-
- /* bio only flags */
- __REQ_UNPLUG, /* unplug the immediately after submission */
- __REQ_RAHEAD, /* read ahead, can fail anytime */
-
- /* request only flags */
- __REQ_SORTED, /* elevator knows about this request */
- __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
- __REQ_FUA, /* forced unit access */
- __REQ_NOMERGE, /* don't touch this for merging */
- __REQ_STARTED, /* drive already may have started this one */
- __REQ_DONTPREP, /* don't call prep for this one */
- __REQ_QUEUED, /* uses queueing */
- __REQ_ELVPRIV, /* elevator private data attached */
- __REQ_FAILED, /* set if the request failed */
- __REQ_QUIET, /* don't worry about errors */
- __REQ_PREEMPT, /* set for "ide_preempt" requests */
- __REQ_ORDERED_COLOR, /* is before or after barrier */
- __REQ_ALLOCED, /* request came from our alloc pool */
- __REQ_COPY_USER, /* contains copies of user pages */
- __REQ_INTEGRITY, /* integrity metadata has been remapped */
- __REQ_FLUSH, /* request for cache flush */
- __REQ_IO_STAT, /* account I/O stat */
- __REQ_MIXED_MERGE, /* merge of different types, fail separately */
- __REQ_NR_BITS, /* stops here */
-};
-
-#define REQ_WRITE (1 << __REQ_WRITE)
-#define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV)
-#define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT)
-#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
-#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
-#define REQ_SYNC (1 << __REQ_SYNC)
-#define REQ_META (1 << __REQ_META)
-#define REQ_DISCARD (1 << __REQ_DISCARD)
-#define REQ_NOIDLE (1 << __REQ_NOIDLE)
-
-#define REQ_FAILFAST_MASK \
- (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
-#define REQ_COMMON_MASK \
- (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \
- REQ_META| REQ_DISCARD | REQ_NOIDLE)
-
-#define REQ_UNPLUG (1 << __REQ_UNPLUG)
-#define REQ_RAHEAD (1 << __REQ_RAHEAD)
-
-#define REQ_SORTED (1 << __REQ_SORTED)
-#define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER)
-#define REQ_FUA (1 << __REQ_FUA)
-#define REQ_NOMERGE (1 << __REQ_NOMERGE)
-#define REQ_STARTED (1 << __REQ_STARTED)
-#define REQ_DONTPREP (1 << __REQ_DONTPREP)
-#define REQ_QUEUED (1 << __REQ_QUEUED)
-#define REQ_ELVPRIV (1 << __REQ_ELVPRIV)
-#define REQ_FAILED (1 << __REQ_FAILED)
-#define REQ_QUIET (1 << __REQ_QUIET)
-#define REQ_PREEMPT (1 << __REQ_PREEMPT)
-#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR)
-#define REQ_ALLOCED (1 << __REQ_ALLOCED)
-#define REQ_COPY_USER (1 << __REQ_COPY_USER)
-#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
-#define REQ_FLUSH (1 << __REQ_FLUSH)
-#define REQ_IO_STAT (1 << __REQ_IO_STAT)
-#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE)
-
/*
* upper 16 bits of bi_rw define the io priority of this bio
*/
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
new file mode 100644
index 0000000000000..118523734af05
--- /dev/null
+++ b/include/linux/blk_types.h
@@ -0,0 +1,193 @@
+/*
+ * Block data types and constants. Directly include this file only to
+ * break include dependency loop.
+ */
+#ifndef __LINUX_BLK_TYPES_H
+#define __LINUX_BLK_TYPES_H
+
+#ifdef CONFIG_BLOCK
+
+#include <linux/types.h>
+
+struct bio_set;
+struct bio;
+struct bio_integrity_payload;
+struct page;
+struct block_device;
+typedef void (bio_end_io_t) (struct bio *, int);
+typedef void (bio_destructor_t) (struct bio *);
+
+/*
+ * was unsigned short, but we might as well be ready for > 64kB I/O pages
+ */
+struct bio_vec {
+ struct page *bv_page;
+ unsigned int bv_len;
+ unsigned int bv_offset;
+};
+
+/*
+ * main unit of I/O for the block layer and lower layers (ie drivers and
+ * stacking drivers)
+ */
+struct bio {
+ sector_t bi_sector; /* device address in 512 byte
+ sectors */
+ struct bio *bi_next; /* request queue link */
+ struct block_device *bi_bdev;
+ unsigned long bi_flags; /* status, command, etc */
+ unsigned long bi_rw; /* bottom bits READ/WRITE,
+ * top bits priority
+ */
+
+ unsigned short bi_vcnt; /* how many bio_vec's */
+ unsigned short bi_idx; /* current index into bvl_vec */
+
+ /* Number of segments in this BIO after
+ * physical address coalescing is performed.
+ */
+ unsigned int bi_phys_segments;
+
+ unsigned int bi_size; /* residual I/O count */
+
+ /*
+ * To keep track of the max segment size, we account for the
+ * sizes of the first and last mergeable segments in this bio.
+ */
+ unsigned int bi_seg_front_size;
+ unsigned int bi_seg_back_size;
+
+ unsigned int bi_max_vecs; /* max bvl_vecs we can hold */
+
+ unsigned int bi_comp_cpu; /* completion CPU */
+
+ atomic_t bi_cnt; /* pin count */
+
+ struct bio_vec *bi_io_vec; /* the actual vec list */
+
+ bio_end_io_t *bi_end_io;
+
+ void *bi_private;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ struct bio_integrity_payload *bi_integrity; /* data integrity */
+#endif
+
+ bio_destructor_t *bi_destructor; /* destructor */
+
+ /*
+ * We can inline a number of vecs at the end of the bio, to avoid
+ * double allocations for a small number of bio_vecs. This member
+ * MUST obviously be kept at the very end of the bio.
+ */
+ struct bio_vec bi_inline_vecs[0];
+};
+
+/*
+ * bio flags
+ */
+#define BIO_UPTODATE 0 /* ok after I/O completion */
+#define BIO_RW_BLOCK 1 /* RW_AHEAD set, and read/write would block */
+#define BIO_EOF 2 /* out-out-bounds error */
+#define BIO_SEG_VALID 3 /* bi_phys_segments valid */
+#define BIO_CLONED 4 /* doesn't own data */
+#define BIO_BOUNCED 5 /* bio is a bounce bio */
+#define BIO_USER_MAPPED 6 /* contains user pages */
+#define BIO_EOPNOTSUPP 7 /* not supported */
+#define BIO_CPU_AFFINE 8 /* complete bio on same CPU as submitted */
+#define BIO_NULL_MAPPED 9 /* contains invalid user pages */
+#define BIO_FS_INTEGRITY 10 /* fs owns integrity data, not block layer */
+#define BIO_QUIET 11 /* Make BIO Quiet */
+#define bio_flagged(bio, flag) ((bio)->bi_flags & (1 << (flag)))
+
+/*
+ * top 4 bits of bio flags indicate the pool this bio came from
+ */
+#define BIO_POOL_BITS (4)
+#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1)
+#define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS)
+#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
+#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
+
+/*
+ * Request flags. For use in the cmd_flags field of struct request, and in
+ * bi_rw of struct bio. Note that some flags are only valid in either one.
+ */
+enum rq_flag_bits {
+ /* common flags */
+ __REQ_WRITE, /* not set, read. set, write */
+ __REQ_FAILFAST_DEV, /* no driver retries of device errors */
+ __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
+ __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */
+
+ __REQ_HARDBARRIER, /* may not be passed by drive either */
+ __REQ_SYNC, /* request is sync (sync write or read) */
+ __REQ_META, /* metadata io request */
+ __REQ_DISCARD, /* request to discard sectors */
+ __REQ_NOIDLE, /* don't anticipate more IO after this one */
+
+ /* bio only flags */
+ __REQ_UNPLUG, /* unplug the immediately after submission */
+ __REQ_RAHEAD, /* read ahead, can fail anytime */
+
+ /* request only flags */
+ __REQ_SORTED, /* elevator knows about this request */
+ __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
+ __REQ_FUA, /* forced unit access */
+ __REQ_NOMERGE, /* don't touch this for merging */
+ __REQ_STARTED, /* drive already may have started this one */
+ __REQ_DONTPREP, /* don't call prep for this one */
+ __REQ_QUEUED, /* uses queueing */
+ __REQ_ELVPRIV, /* elevator private data attached */
+ __REQ_FAILED, /* set if the request failed */
+ __REQ_QUIET, /* don't worry about errors */
+ __REQ_PREEMPT, /* set for "ide_preempt" requests */
+ __REQ_ORDERED_COLOR, /* is before or after barrier */
+ __REQ_ALLOCED, /* request came from our alloc pool */
+ __REQ_COPY_USER, /* contains copies of user pages */
+ __REQ_INTEGRITY, /* integrity metadata has been remapped */
+ __REQ_FLUSH, /* request for cache flush */
+ __REQ_IO_STAT, /* account I/O stat */
+ __REQ_MIXED_MERGE, /* merge of different types, fail separately */
+ __REQ_NR_BITS, /* stops here */
+};
+
+#define REQ_WRITE (1 << __REQ_WRITE)
+#define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV)
+#define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT)
+#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
+#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
+#define REQ_SYNC (1 << __REQ_SYNC)
+#define REQ_META (1 << __REQ_META)
+#define REQ_DISCARD (1 << __REQ_DISCARD)
+#define REQ_NOIDLE (1 << __REQ_NOIDLE)
+
+#define REQ_FAILFAST_MASK \
+ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
+#define REQ_COMMON_MASK \
+ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \
+ REQ_META| REQ_DISCARD | REQ_NOIDLE)
+
+#define REQ_UNPLUG (1 << __REQ_UNPLUG)
+#define REQ_RAHEAD (1 << __REQ_RAHEAD)
+
+#define REQ_SORTED (1 << __REQ_SORTED)
+#define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER)
+#define REQ_FUA (1 << __REQ_FUA)
+#define REQ_NOMERGE (1 << __REQ_NOMERGE)
+#define REQ_STARTED (1 << __REQ_STARTED)
+#define REQ_DONTPREP (1 << __REQ_DONTPREP)
+#define REQ_QUEUED (1 << __REQ_QUEUED)
+#define REQ_ELVPRIV (1 << __REQ_ELVPRIV)
+#define REQ_FAILED (1 << __REQ_FAILED)
+#define REQ_QUIET (1 << __REQ_QUIET)
+#define REQ_PREEMPT (1 << __REQ_PREEMPT)
+#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR)
+#define REQ_ALLOCED (1 << __REQ_ALLOCED)
+#define REQ_COPY_USER (1 << __REQ_COPY_USER)
+#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
+#define REQ_FLUSH (1 << __REQ_FLUSH)
+#define REQ_IO_STAT (1 << __REQ_IO_STAT)
+#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE)
+
+#endif /* CONFIG_BLOCK */
+#endif /* __LINUX_BLK_TYPES_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 55dad7bca25b8..c539112772107 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -8,6 +8,7 @@
#include <linux/limits.h>
#include <linux/ioctl.h>
+#include <linux/blk_types.h>
/*
* It's silly to have NR_OPEN bigger than NR_FILE, but you can change
@@ -117,7 +118,7 @@ struct inodes_stat_t {
* immediately wait on this read without caring about
* unplugging.
* READA Used for read-ahead operations. Lower priority, and the
- * block layer could (in theory) choose to ignore this
+ * block layer could (in theory) choose to ignore this
* request if it runs into resource problems.
* WRITE A normal async write. Device will be plugged.
* SWRITE Like WRITE, but a special case for ll_rw_block() that
@@ -144,13 +145,13 @@ struct inodes_stat_t {
* of this IO.
*
*/
-#define RW_MASK 1
-#define RWA_MASK 16
+#define RW_MASK REQ_WRITE
+#define RWA_MASK REQ_RAHEAD
#define READ 0
-#define WRITE 1
-#define READA 16 /* readahead - don't block if no resources */
-#define SWRITE 17 /* for ll_rw_block(), wait for buffer lock */
+#define WRITE RW_MASK
+#define READA RWA_MASK
+#define SWRITE (WRITE | READA)
#define READ_SYNC (READ | REQ_SYNC | REQ_UNPLUG)
#define READ_META (READ | REQ_META)
@@ -2200,7 +2201,6 @@ static inline void insert_inode_hash(struct inode *inode) {
extern void file_move(struct file *f, struct list_head *list);
extern void file_kill(struct file *f);
#ifdef CONFIG_BLOCK
-struct bio;
extern void submit_bio(int, struct bio *);
extern int bdev_read_only(struct block_device *);
#endif
@@ -2267,7 +2267,6 @@ static inline int xip_truncate_page(struct address_space *mapping, loff_t from)
#endif
#ifdef CONFIG_BLOCK
-struct bio;
typedef void (dio_submit_t)(int rw, struct bio *bio, struct inode *inode,
loff_t file_offset);
void dio_end_io(struct bio *bio, int error);
--
GitLab
From 4aeefdc69f7b6f3f287e6fd8d4b213953b9e92d8 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Tue, 3 Aug 2010 13:22:51 +0200
Subject: [PATCH 384/863] coda: fixup clash with block layer REQ_* defines
CODA should not be using defines in the global name space of
that nature, prefix them with CODA_.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/coda/psdev.c | 12 ++++++------
fs/coda/upcall.c | 12 ++++++------
include/linux/coda_psdev.h | 8 ++++----
3 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index 66b9cf79c5ba2..de89645777c7c 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -177,7 +177,7 @@ static ssize_t coda_psdev_write(struct file *file, const char __user *buf,
nbytes = req->uc_outSize; /* don't have more space! */
}
if (copy_from_user(req->uc_data, buf, nbytes)) {
- req->uc_flags |= REQ_ABORT;
+ req->uc_flags |= CODA_REQ_ABORT;
wake_up(&req->uc_sleep);
retval = -EFAULT;
goto out;
@@ -254,8 +254,8 @@ static ssize_t coda_psdev_read(struct file * file, char __user * buf,
retval = -EFAULT;
/* If request was not a signal, enqueue and don't free */
- if (!(req->uc_flags & REQ_ASYNC)) {
- req->uc_flags |= REQ_READ;
+ if (!(req->uc_flags & CODA_REQ_ASYNC)) {
+ req->uc_flags |= CODA_REQ_READ;
list_add_tail(&(req->uc_chain), &vcp->vc_processing);
goto out;
}
@@ -315,19 +315,19 @@ static int coda_psdev_release(struct inode * inode, struct file * file)
list_del(&req->uc_chain);
/* Async requests need to be freed here */
- if (req->uc_flags & REQ_ASYNC) {
+ if (req->uc_flags & CODA_REQ_ASYNC) {
CODA_FREE(req->uc_data, sizeof(struct coda_in_hdr));
kfree(req);
continue;
}
- req->uc_flags |= REQ_ABORT;
+ req->uc_flags |= CODA_REQ_ABORT;
wake_up(&req->uc_sleep);
}
list_for_each_entry_safe(req, tmp, &vcp->vc_processing, uc_chain) {
list_del(&req->uc_chain);
- req->uc_flags |= REQ_ABORT;
+ req->uc_flags |= CODA_REQ_ABORT;
wake_up(&req->uc_sleep);
}
diff --git a/fs/coda/upcall.c b/fs/coda/upcall.c
index f09c5ed76f6cd..b8893ab6f9e63 100644
--- a/fs/coda/upcall.c
+++ b/fs/coda/upcall.c
@@ -604,7 +604,7 @@ static void coda_unblock_signals(sigset_t *old)
(((r)->uc_opcode != CODA_CLOSE && \
(r)->uc_opcode != CODA_STORE && \
(r)->uc_opcode != CODA_RELEASE) || \
- (r)->uc_flags & REQ_READ))
+ (r)->uc_flags & CODA_REQ_READ))
static inline void coda_waitfor_upcall(struct upc_req *req)
{
@@ -624,7 +624,7 @@ static inline void coda_waitfor_upcall(struct upc_req *req)
set_current_state(TASK_UNINTERRUPTIBLE);
/* got a reply */
- if (req->uc_flags & (REQ_WRITE | REQ_ABORT))
+ if (req->uc_flags & (CODA_REQ_WRITE | CODA_REQ_ABORT))
break;
if (blocked && time_after(jiffies, timeout) &&
@@ -708,7 +708,7 @@ static int coda_upcall(struct venus_comm *vcp,
coda_waitfor_upcall(req);
/* Op went through, interrupt or not... */
- if (req->uc_flags & REQ_WRITE) {
+ if (req->uc_flags & CODA_REQ_WRITE) {
out = (union outputArgs *)req->uc_data;
/* here we map positive Venus errors to kernel errors */
error = -out->oh.result;
@@ -717,13 +717,13 @@ static int coda_upcall(struct venus_comm *vcp,
}
error = -EINTR;
- if ((req->uc_flags & REQ_ABORT) || !signal_pending(current)) {
+ if ((req->uc_flags & CODA_REQ_ABORT) || !signal_pending(current)) {
printk(KERN_WARNING "coda: Unexpected interruption.\n");
goto exit;
}
/* Interrupted before venus read it. */
- if (!(req->uc_flags & REQ_READ))
+ if (!(req->uc_flags & CODA_REQ_READ))
goto exit;
/* Venus saw the upcall, make sure we can send interrupt signal */
@@ -747,7 +747,7 @@ static int coda_upcall(struct venus_comm *vcp,
sig_inputArgs->ih.opcode = CODA_SIGNAL;
sig_inputArgs->ih.unique = req->uc_unique;
- sig_req->uc_flags = REQ_ASYNC;
+ sig_req->uc_flags = CODA_REQ_ASYNC;
sig_req->uc_opcode = sig_inputArgs->ih.opcode;
sig_req->uc_unique = sig_inputArgs->ih.unique;
sig_req->uc_inSize = sizeof(struct coda_in_hdr);
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
index 8859e2ede9fe3..284b520934a0a 100644
--- a/include/linux/coda_psdev.h
+++ b/include/linux/coda_psdev.h
@@ -86,9 +86,9 @@ struct upc_req {
wait_queue_head_t uc_sleep; /* process' wait queue */
};
-#define REQ_ASYNC 0x1
-#define REQ_READ 0x2
-#define REQ_WRITE 0x4
-#define REQ_ABORT 0x8
+#define CODA_REQ_ASYNC 0x1
+#define CODA_REQ_READ 0x2
+#define CODA_REQ_WRITE 0x4
+#define CODA_REQ_ABORT 0x8
#endif
--
GitLab
From 6f904ff0e39ea88f81eb77e8dfb4e1238492f0a8 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:11 +0300
Subject: [PATCH 385/863] writeback: harmonize writeback threads naming
The write-back code mixes words "thread" and "task" for the same things. This
is not a big deal, but still an inconsistency.
hch: a convention I tend to use and I've seen in various places
is to always use _task for the storage of the task_struct pointer,
and thread everywhere else. This especially helps with having
foo_thread for the actual thread and foo_task for a global
variable keeping the task_struct pointer
This patch renames:
* 'bdi_add_default_flusher_task()' -> 'bdi_add_default_flusher_thread()'
* 'bdi_forker_task()' -> 'bdi_forker_thread()'
because bdi threads are 'bdi_writeback_thread()', so these names are more
consistent.
This patch also amends commentaries and makes them refer the forker and bdi
threads as "thread", not "task".
Also, while on it, make 'bdi_add_default_flusher_thread()' declaration use
'static void' instead of 'void static' and make checkpatch.pl happy.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 2 +-
include/linux/backing-dev.h | 2 +-
mm/backing-dev.c | 26 +++++++++++++-------------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 261570deb22c9..002be0ff2ab3d 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -840,7 +840,7 @@ int bdi_writeback_thread(void *data)
/*
* Longest period of inactivity that we tolerate. If we
- * see dirty data again later, the task will get
+ * see dirty data again later, the thread will get
* recreated automatically.
*/
max_idle = max(5UL * 60 * HZ, wait_jiffies);
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index e536f3a74e601..f0936f5f85dd8 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -50,7 +50,7 @@ struct bdi_writeback {
unsigned long last_old_flush; /* last old data flush */
- struct task_struct *task; /* writeback task */
+ struct task_struct *task; /* writeback thread */
struct list_head b_dirty; /* dirty inodes */
struct list_head b_io; /* parked for writeback */
struct list_head b_more_io; /* parked for more writeback */
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index ac78a3336181c..4e9ed2a8521fe 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -50,7 +50,7 @@ static struct timer_list sync_supers_timer;
static int bdi_sync_supers(void *);
static void sync_supers_timer_fn(unsigned long);
-static void bdi_add_default_flusher_task(struct backing_dev_info *bdi);
+static void bdi_add_default_flusher_thread(struct backing_dev_info *bdi);
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
@@ -279,10 +279,10 @@ static void bdi_flush_io(struct backing_dev_info *bdi)
}
/*
- * kupdated() used to do this. We cannot do it from the bdi_forker_task()
+ * kupdated() used to do this. We cannot do it from the bdi_forker_thread()
* or we risk deadlocking on ->s_umount. The longer term solution would be
* to implement sync_supers_bdi() or similar and simply do it from the
- * bdi writeback tasks individually.
+ * bdi writeback thread individually.
*/
static int bdi_sync_supers(void *unused)
{
@@ -318,7 +318,7 @@ static void sync_supers_timer_fn(unsigned long unused)
bdi_arm_supers_timer();
}
-static int bdi_forker_task(void *ptr)
+static int bdi_forker_thread(void *ptr)
{
struct bdi_writeback *me = ptr;
@@ -354,7 +354,7 @@ static int bdi_forker_task(void *ptr)
!bdi_has_dirty_io(bdi))
continue;
- bdi_add_default_flusher_task(bdi);
+ bdi_add_default_flusher_thread(bdi);
}
set_current_state(TASK_INTERRUPTIBLE);
@@ -376,7 +376,7 @@ static int bdi_forker_task(void *ptr)
/*
* This is our real job - check for pending entries in
- * bdi_pending_list, and create the tasks that got added
+ * bdi_pending_list, and create the threads that got added
*/
bdi = list_entry(bdi_pending_list.next, struct backing_dev_info,
bdi_list);
@@ -387,7 +387,7 @@ static int bdi_forker_task(void *ptr)
wb->task = kthread_run(bdi_writeback_thread, wb, "flush-%s",
dev_name(bdi->dev));
/*
- * If task creation fails, then readd the bdi to
+ * If thread creation fails, then readd the bdi to
* the pending list and force writeout of the bdi
* from this forker thread. That will free some memory
* and we can try again.
@@ -430,10 +430,10 @@ static void bdi_add_to_pending(struct rcu_head *head)
}
/*
- * Add the default flusher task that gets created for any bdi
+ * Add the default flusher thread that gets created for any bdi
* that has dirty data pending writeout
*/
-void static bdi_add_default_flusher_task(struct backing_dev_info *bdi)
+static void bdi_add_default_flusher_thread(struct backing_dev_info *bdi)
{
if (!bdi_cap_writeback_dirty(bdi))
return;
@@ -445,10 +445,10 @@ void static bdi_add_default_flusher_task(struct backing_dev_info *bdi)
}
/*
- * Check with the helper whether to proceed adding a task. Will only
+ * Check with the helper whether to proceed adding a thread. Will only
* abort if we two or more simultanous calls to
- * bdi_add_default_flusher_task() occured, further additions will block
- * waiting for previous additions to finish.
+ * bdi_add_default_flusher_thread() occured, further additions will
+ * block waiting for previous additions to finish.
*/
if (!test_and_set_bit(BDI_pending, &bdi->state)) {
list_del_rcu(&bdi->bdi_list);
@@ -506,7 +506,7 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
if (bdi_cap_flush_forker(bdi)) {
struct bdi_writeback *wb = &bdi->wb;
- wb->task = kthread_run(bdi_forker_task, wb, "bdi-%s",
+ wb->task = kthread_run(bdi_forker_thread, wb, "bdi-%s",
dev_name(dev));
if (IS_ERR(wb->task)) {
wb->task = NULL;
--
GitLab
From 94eac5e62364df4e605e451218ee6024a7ba664f Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:12 +0300
Subject: [PATCH 386/863] writeback: fix possible race when creating bdi
threads
This patch fixes a very unlikely race condition on the bdi forker thread error
path: when bdi thread creation fails, 'bdi->wb.task' may contain the error code
for a short period of time. If at the same time someone submits a work to this
bdi, we can end up with an oops 'bdi_queue_work()' while executing
'wake_up_process(wb->task)'.
This patch fixes the issue by introducing a temporary variable 'task' and
storing the possible error code there, so that 'wb->task' would never take
erroneous values.
Note, this race is very unlikely and I never hit it, so it is theoretical, but
nevertheless worth fixing.
This patch also merges 2 comments which were previously separate.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
mm/backing-dev.c | 28 +++++++++++-----------------
1 file changed, 11 insertions(+), 17 deletions(-)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 4e9ed2a8521fe..327e36d1d623a 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -331,8 +331,8 @@ static int bdi_forker_thread(void *ptr)
set_user_nice(current, 0);
for (;;) {
+ struct task_struct *task;
struct backing_dev_info *bdi, *tmp;
- struct bdi_writeback *wb;
/*
* Temporary measure, we want to make sure we don't see
@@ -383,29 +383,23 @@ static int bdi_forker_thread(void *ptr)
list_del_init(&bdi->bdi_list);
spin_unlock_bh(&bdi_lock);
- wb = &bdi->wb;
- wb->task = kthread_run(bdi_writeback_thread, wb, "flush-%s",
- dev_name(bdi->dev));
- /*
- * If thread creation fails, then readd the bdi to
- * the pending list and force writeout of the bdi
- * from this forker thread. That will free some memory
- * and we can try again.
- */
- if (IS_ERR(wb->task)) {
- wb->task = NULL;
-
+ task = kthread_run(bdi_writeback_thread, &bdi->wb, "flush-%s",
+ dev_name(bdi->dev));
+ if (IS_ERR(task)) {
/*
- * Add this 'bdi' to the back, so we get
- * a chance to flush other bdi's to free
- * memory.
+ * If thread creation fails, then readd the bdi back to
+ * the list and force writeout of the bdi from this
+ * forker thread. That will free some memory and we can
+ * try again. Add it to the tail so we get a chance to
+ * flush other bdi's to free memory.
*/
spin_lock_bh(&bdi_lock);
list_add_tail(&bdi->bdi_list, &bdi_pending_list);
spin_unlock_bh(&bdi_lock);
bdi_flush_io(bdi);
- }
+ } else
+ bdi->wb.task = task;
}
return 0;
--
GitLab
From c5f7ad233b8805dae06e694538d8095b19f3c560 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:13 +0300
Subject: [PATCH 387/863] writeback: do not lose wake-ups in the forker thread
- 1
Currently the forker thread can lose wake-ups which may lead to unnecessary
delays in processing bdi works. E.g., consider the following scenario.
1. 'bdi_forker_thread()' walks the 'bdi_list', finds out there is nothing to
do, and is about to finish the loop.
2. A bdi thread decides to exit because it was inactive for long time.
3. 'bdi_queue_work()' adds a work to the bdi which just exited, so it wakes up
the forker thread.
4. but 'bdi_forker_thread()' executes 'set_current_state(TASK_INTERRUPTIBLE)'
and goes sleep. We lose a wake-up.
Losing the wake-up is not fatal, but this means that the bdi work processing
will be delayed by up to 5 sec. This race is theoretical, I never hit it, but
it is worth fixing.
The fix is to execute 'set_current_state(TASK_INTERRUPTIBLE)' _before_ walking
'bdi_list', not after.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
mm/backing-dev.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 327e36d1d623a..b1dc2d4b9cddc 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -342,6 +342,7 @@ static int bdi_forker_thread(void *ptr)
wb_do_writeback(me, 0);
spin_lock_bh(&bdi_lock);
+ set_current_state(TASK_INTERRUPTIBLE);
/*
* Check if any existing bdi's have dirty data without
@@ -357,8 +358,6 @@ static int bdi_forker_thread(void *ptr)
bdi_add_default_flusher_thread(bdi);
}
- set_current_state(TASK_INTERRUPTIBLE);
-
if (list_empty(&bdi_pending_list)) {
unsigned long wait;
--
GitLab
From c4ec7908c2c5125f75fabd100e7a95626a6883ee Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:14 +0300
Subject: [PATCH 388/863] writeback: do not lose wake-ups in the forker thread
- 2
Currently, if someone submits jobs for the default bdi, we can lose wake-up
events. E.g., this can happen if 'bdi_queue_work()' is called when
'bdi_forker_thread()' is executing code after 'wb_do_writeback(me, 0)', but
before 'set_current_state(TASK_INTERRUPTIBLE)'.
This situation is unlikely, and the result is not very severe - we'll just
delay the execution of the work, but this is still not very nice.
This patch fixes the issue by checking whether the default bdi has works before
the forker thread goes sleep.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
mm/backing-dev.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index b1dc2d4b9cddc..72e6eb96efe21 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -358,6 +358,10 @@ static int bdi_forker_thread(void *ptr)
bdi_add_default_flusher_thread(bdi);
}
+ /* Keep working if default bdi still has things to do */
+ if (!list_empty(&me->bdi->work_list))
+ __set_current_state(TASK_RUNNING);
+
if (list_empty(&bdi_pending_list)) {
unsigned long wait;
--
GitLab
From 297252c81de8043ca6c36e5984c24fdb5aab9013 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:15 +0300
Subject: [PATCH 389/863] writeback: do not lose wake-ups in bdi threads
Currently, bdi threads ('bdi_writeback_thread()') can lose wake-ups. For
example, if 'bdi_queue_work()' is executed after the bdi thread have had
finished 'wb_do_writeback()' but before it called
'schedule_timeout_interruptible()'.
To fix this issue, we have to check whether we have works to process after we
have changed the task state to 'TASK_INTERRUPTIBLE'.
This patch also clean-ups handling of the cases when 'dirty_writeback_interval'
is zero or non-zero.
Additionally, this patch also removes unneeded 'list_empty_careful()' call.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 002be0ff2ab3d..05444eaa3f369 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -848,17 +848,18 @@ int bdi_writeback_thread(void *data)
break;
}
- if (dirty_writeback_interval) {
- wait_jiffies = msecs_to_jiffies(dirty_writeback_interval * 10);
- schedule_timeout_interruptible(wait_jiffies);
- } else {
- set_current_state(TASK_INTERRUPTIBLE);
- if (list_empty_careful(&wb->bdi->work_list) &&
- !kthread_should_stop())
- schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (!list_empty(&bdi->work_list)) {
__set_current_state(TASK_RUNNING);
+ continue;
}
+ if (dirty_writeback_interval) {
+ wait_jiffies = msecs_to_jiffies(dirty_writeback_interval * 10);
+ schedule_timeout(wait_jiffies);
+ } else
+ schedule();
+
try_to_freeze();
}
--
GitLab
From 080dcec41709be72613133f695be75b98dd43e88 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:16 +0300
Subject: [PATCH 390/863] writeback: simplify bdi code a little
This patch simplifies bdi code a little by removing the 'pending_list' which is
redundant. Indeed, currently the forker thread ('bdi_forker_thread()') is
working like this:
1. In a loop, fetch all bdi's which have works but have no writeback thread and
move them to the 'pending_list'.
2. If the list is empty, sleep for 5 sec.
3. Otherwise, take one bdi from the list, fork the writeback thread for this
bdi, and repeat the loop.
IOW, it first moves everything to the 'pending_list', then process only one
element, and so on. This patch simplifies the algorithm, which is now as
follows.
1. Find the first bdi which has a work and remove it from the global list of
bdi's (bdi_list).
2. If there was not such bdi, sleep 5 sec.
3. Fork the writeback thread for this bdi and repeat the loop.
IOW, now we find the first bdi to process, process it, and so on. This is
simpler and involves less lists.
The bonus now is that we can get rid of a couple of functions, as well as
remove complications which involve 'rcu_call()' and 'bdi->rcu_head'.
This patch also makes sure we use 'list_add_tail_rcu()', instead of plain
'list_add_tail()', but this piece of code is going to be removed in the next
patch anyway.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/backing-dev.h | 1 -
mm/backing-dev.c | 82 ++++++++-----------------------------
2 files changed, 18 insertions(+), 65 deletions(-)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index f0936f5f85dd8..95ecb2bebca88 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -58,7 +58,6 @@ struct bdi_writeback {
struct backing_dev_info {
struct list_head bdi_list;
- struct rcu_head rcu_head;
unsigned long ra_pages; /* max readahead in PAGE_CACHE_SIZE units */
unsigned long state; /* Always use atomic bitops on this */
unsigned int capabilities; /* Device capabilities */
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 72e6eb96efe21..dbc66815a0fe0 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -50,8 +50,6 @@ static struct timer_list sync_supers_timer;
static int bdi_sync_supers(void *);
static void sync_supers_timer_fn(unsigned long);
-static void bdi_add_default_flusher_thread(struct backing_dev_info *bdi);
-
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -331,6 +329,7 @@ static int bdi_forker_thread(void *ptr)
set_user_nice(current, 0);
for (;;) {
+ bool fork = false;
struct task_struct *task;
struct backing_dev_info *bdi, *tmp;
@@ -349,23 +348,30 @@ static int bdi_forker_thread(void *ptr)
* a thread registered. If so, set that up.
*/
list_for_each_entry_safe(bdi, tmp, &bdi_list, bdi_list) {
+ if (!bdi_cap_writeback_dirty(bdi))
+ continue;
if (bdi->wb.task)
continue;
if (list_empty(&bdi->work_list) &&
!bdi_has_dirty_io(bdi))
continue;
- bdi_add_default_flusher_thread(bdi);
+ WARN(!test_bit(BDI_registered, &bdi->state),
+ "bdi %p/%s is not registered!\n", bdi, bdi->name);
+
+ list_del_rcu(&bdi->bdi_list);
+ fork = true;
+ break;
}
+ spin_unlock_bh(&bdi_lock);
/* Keep working if default bdi still has things to do */
if (!list_empty(&me->bdi->work_list))
__set_current_state(TASK_RUNNING);
- if (list_empty(&bdi_pending_list)) {
+ if (!fork) {
unsigned long wait;
- spin_unlock_bh(&bdi_lock);
wait = msecs_to_jiffies(dirty_writeback_interval * 10);
if (wait)
schedule_timeout(wait);
@@ -378,13 +384,13 @@ static int bdi_forker_thread(void *ptr)
__set_current_state(TASK_RUNNING);
/*
- * This is our real job - check for pending entries in
- * bdi_pending_list, and create the threads that got added
+ * Set the pending bit - if someone will try to unregister this
+ * bdi - it'll wait on this bit.
*/
- bdi = list_entry(bdi_pending_list.next, struct backing_dev_info,
- bdi_list);
- list_del_init(&bdi->bdi_list);
- spin_unlock_bh(&bdi_lock);
+ set_bit(BDI_pending, &bdi->state);
+
+ /* Make sure no one uses the picked bdi */
+ synchronize_rcu();
task = kthread_run(bdi_writeback_thread, &bdi->wb, "flush-%s",
dev_name(bdi->dev));
@@ -397,7 +403,7 @@ static int bdi_forker_thread(void *ptr)
* flush other bdi's to free memory.
*/
spin_lock_bh(&bdi_lock);
- list_add_tail(&bdi->bdi_list, &bdi_pending_list);
+ list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
spin_unlock_bh(&bdi_lock);
bdi_flush_io(bdi);
@@ -408,57 +414,6 @@ static int bdi_forker_thread(void *ptr)
return 0;
}
-static void bdi_add_to_pending(struct rcu_head *head)
-{
- struct backing_dev_info *bdi;
-
- bdi = container_of(head, struct backing_dev_info, rcu_head);
- INIT_LIST_HEAD(&bdi->bdi_list);
-
- spin_lock(&bdi_lock);
- list_add_tail(&bdi->bdi_list, &bdi_pending_list);
- spin_unlock(&bdi_lock);
-
- /*
- * We are now on the pending list, wake up bdi_forker_task()
- * to finish the job and add us back to the active bdi_list
- */
- wake_up_process(default_backing_dev_info.wb.task);
-}
-
-/*
- * Add the default flusher thread that gets created for any bdi
- * that has dirty data pending writeout
- */
-static void bdi_add_default_flusher_thread(struct backing_dev_info *bdi)
-{
- if (!bdi_cap_writeback_dirty(bdi))
- return;
-
- if (WARN_ON(!test_bit(BDI_registered, &bdi->state))) {
- printk(KERN_ERR "bdi %p/%s is not registered!\n",
- bdi, bdi->name);
- return;
- }
-
- /*
- * Check with the helper whether to proceed adding a thread. Will only
- * abort if we two or more simultanous calls to
- * bdi_add_default_flusher_thread() occured, further additions will
- * block waiting for previous additions to finish.
- */
- if (!test_and_set_bit(BDI_pending, &bdi->state)) {
- list_del_rcu(&bdi->bdi_list);
-
- /*
- * We must wait for the current RCU period to end before
- * moving to the pending list. So schedule that operation
- * from an RCU callback.
- */
- call_rcu(&bdi->rcu_head, bdi_add_to_pending);
- }
-}
-
/*
* Remove bdi from bdi_list, and ensure that it is no longer visible
*/
@@ -599,7 +554,6 @@ int bdi_init(struct backing_dev_info *bdi)
bdi->max_ratio = 100;
bdi->max_prop_frac = PROP_FRAC_BASE;
spin_lock_init(&bdi->wb_lock);
- INIT_RCU_HEAD(&bdi->rcu_head);
INIT_LIST_HEAD(&bdi->bdi_list);
INIT_LIST_HEAD(&bdi->work_list);
--
GitLab
From 78c40cb6581a74adc48821f3de6b864a54d4c34d Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:17 +0300
Subject: [PATCH 391/863] writeback: do not remove bdi from bdi_list
The forker thread removes bdis from 'bdi_list' before forking the bdi thread.
But this is wrong for at least 2 reasons.
Reason #1: if we temporary remove a bdi from the list, we may miss works which
would otherwise be given to us.
Reason #2: this is racy; indeed, 'bdi_wb_shutdown()' expects that bdis are
always in the 'bdi_list' (see 'bdi_remove_from_list()'), and when
it races with the forker thread, it can shut down the bdi thread
at the same time as the forker creates it.
This patch makes sure the forker thread never removes bdis from 'bdi_list'
(which was suggested by Christoph Hellwig).
In order to make sure that we do not race with 'bdi_wb_shutdown()', we have to
hold the 'bdi_lock' while walking the 'bdi_list' and setting the 'BDI_pending'
flag.
NOTE! The error path is interesting. Currently, when we fail to create a bdi
thread, we move the bdi to the tail of 'bdi_list'. But if we never remove the
bdi from the list, we cannot move it to the tail either, because then we can
mess up the RCU readers which walk the list. And also, we'll have the race
described above in "Reason #2".
But I not think that adding to the tail is any important so I just do not do
that.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 7 -------
mm/backing-dev.c | 31 ++++++++++---------------------
2 files changed, 10 insertions(+), 28 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 05444eaa3f369..57fbfd0ebc521 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -804,13 +804,6 @@ int bdi_writeback_thread(void *data)
unsigned long wait_jiffies = -1UL;
long pages_written;
- /*
- * Add us to the active bdi_list
- */
- spin_lock_bh(&bdi_lock);
- list_add_rcu(&bdi->bdi_list, &bdi_list);
- spin_unlock_bh(&bdi_lock);
-
current->flags |= PF_FLUSHER | PF_SWAPWRITE;
set_freezable();
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index dbc66815a0fe0..672c17bb32db6 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -331,7 +331,7 @@ static int bdi_forker_thread(void *ptr)
for (;;) {
bool fork = false;
struct task_struct *task;
- struct backing_dev_info *bdi, *tmp;
+ struct backing_dev_info *bdi;
/*
* Temporary measure, we want to make sure we don't see
@@ -347,7 +347,7 @@ static int bdi_forker_thread(void *ptr)
* Check if any existing bdi's have dirty data without
* a thread registered. If so, set that up.
*/
- list_for_each_entry_safe(bdi, tmp, &bdi_list, bdi_list) {
+ list_for_each_entry(bdi, &bdi_list, bdi_list) {
if (!bdi_cap_writeback_dirty(bdi))
continue;
if (bdi->wb.task)
@@ -359,8 +359,13 @@ static int bdi_forker_thread(void *ptr)
WARN(!test_bit(BDI_registered, &bdi->state),
"bdi %p/%s is not registered!\n", bdi, bdi->name);
- list_del_rcu(&bdi->bdi_list);
fork = true;
+
+ /*
+ * Set the pending bit - if someone will try to
+ * unregister this bdi - it'll wait on this bit.
+ */
+ set_bit(BDI_pending, &bdi->state);
break;
}
spin_unlock_bh(&bdi_lock);
@@ -383,29 +388,13 @@ static int bdi_forker_thread(void *ptr)
__set_current_state(TASK_RUNNING);
- /*
- * Set the pending bit - if someone will try to unregister this
- * bdi - it'll wait on this bit.
- */
- set_bit(BDI_pending, &bdi->state);
-
- /* Make sure no one uses the picked bdi */
- synchronize_rcu();
-
task = kthread_run(bdi_writeback_thread, &bdi->wb, "flush-%s",
dev_name(bdi->dev));
if (IS_ERR(task)) {
/*
- * If thread creation fails, then readd the bdi back to
- * the list and force writeout of the bdi from this
- * forker thread. That will free some memory and we can
- * try again. Add it to the tail so we get a chance to
- * flush other bdi's to free memory.
+ * If thread creation fails, force writeout of the bdi
+ * from the thread.
*/
- spin_lock_bh(&bdi_lock);
- list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
- spin_unlock_bh(&bdi_lock);
-
bdi_flush_io(bdi);
} else
bdi->wb.task = task;
--
GitLab
From ecd584030da67ede1bf17955746a6ce834d9fc6b Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:18 +0300
Subject: [PATCH 392/863] writeback: move last_active to bdi
Currently bdi threads use local variable 'last_active' which stores last time
when the bdi thread did some useful work. Move this local variable to 'struct
bdi_writeback'. This is just a preparation for the further patches which will
make the forker thread decide when bdi threads should be killed.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 6 +++---
include/linux/backing-dev.h | 13 +++++++------
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 57fbfd0ebc521..9f5cab75c1577 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -800,12 +800,12 @@ int bdi_writeback_thread(void *data)
{
struct bdi_writeback *wb = data;
struct backing_dev_info *bdi = wb->bdi;
- unsigned long last_active = jiffies;
unsigned long wait_jiffies = -1UL;
long pages_written;
current->flags |= PF_FLUSHER | PF_SWAPWRITE;
set_freezable();
+ wb->last_active = jiffies;
/*
* Our parent may run at a different priority, just set us to normal
@@ -827,7 +827,7 @@ int bdi_writeback_thread(void *data)
trace_writeback_pages_written(pages_written);
if (pages_written)
- last_active = jiffies;
+ wb->last_active = jiffies;
else if (wait_jiffies != -1UL) {
unsigned long max_idle;
@@ -837,7 +837,7 @@ int bdi_writeback_thread(void *data)
* recreated automatically.
*/
max_idle = max(5UL * 60 * HZ, wait_jiffies);
- if (time_after(jiffies, max_idle + last_active))
+ if (time_after(jiffies, max_idle + wb->last_active))
break;
}
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 95ecb2bebca88..71b6223e0a776 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -45,15 +45,16 @@ enum bdi_stat_item {
#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
struct bdi_writeback {
- struct backing_dev_info *bdi; /* our parent bdi */
+ struct backing_dev_info *bdi; /* our parent bdi */
unsigned int nr;
- unsigned long last_old_flush; /* last old data flush */
+ unsigned long last_old_flush; /* last old data flush */
+ unsigned long last_active; /* last time bdi thread was active */
- struct task_struct *task; /* writeback thread */
- struct list_head b_dirty; /* dirty inodes */
- struct list_head b_io; /* parked for writeback */
- struct list_head b_more_io; /* parked for more writeback */
+ struct task_struct *task; /* writeback thread */
+ struct list_head b_dirty; /* dirty inodes */
+ struct list_head b_io; /* parked for writeback */
+ struct list_head b_more_io; /* parked for more writeback */
};
struct backing_dev_info {
--
GitLab
From adf392407076b85816d48714fb8eeaedb2157884 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:19 +0300
Subject: [PATCH 393/863] writeback: restructure bdi forker loop a little
This patch re-structures the bdi forker a little:
1. Add 'bdi_cap_flush_forker(bdi)' condition check to the bdi loop. The reason
for this is that the forker thread can start _before_ the 'BDI_registered'
flag is set (see 'bdi_register()'), so the WARN() statement will fire for
the default bdi. I observed this warning at boot-up.
2. Introduce an enum 'action' and use "switch" statement in the outer loop.
This is a preparation to the further patch which will teach the forker
thread killing bdi threads, so we'll have another case in the "switch"
statement. This change was suggested by Christoph Hellwig.
This patch is just a small step towards the coming change where the forker
thread will kill the bdi threads. It should simplify reviewing the following
changes, which would otherwise be larger.
This patch also amends comments a little.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
mm/backing-dev.c | 69 +++++++++++++++++++++++++++---------------------
1 file changed, 39 insertions(+), 30 deletions(-)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 672c17bb32db6..e104e32c2ee82 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -329,9 +329,12 @@ static int bdi_forker_thread(void *ptr)
set_user_nice(current, 0);
for (;;) {
- bool fork = false;
struct task_struct *task;
struct backing_dev_info *bdi;
+ enum {
+ NO_ACTION, /* Nothing to do */
+ FORK_THREAD, /* Fork bdi thread */
+ } action = NO_ACTION;
/*
* Temporary measure, we want to make sure we don't see
@@ -348,25 +351,31 @@ static int bdi_forker_thread(void *ptr)
* a thread registered. If so, set that up.
*/
list_for_each_entry(bdi, &bdi_list, bdi_list) {
- if (!bdi_cap_writeback_dirty(bdi))
- continue;
- if (bdi->wb.task)
- continue;
- if (list_empty(&bdi->work_list) &&
- !bdi_has_dirty_io(bdi))
+ bool have_dirty_io;
+
+ if (!bdi_cap_writeback_dirty(bdi) ||
+ bdi_cap_flush_forker(bdi))
continue;
WARN(!test_bit(BDI_registered, &bdi->state),
"bdi %p/%s is not registered!\n", bdi, bdi->name);
- fork = true;
+ have_dirty_io = !list_empty(&bdi->work_list) ||
+ wb_has_dirty_io(&bdi->wb);
/*
- * Set the pending bit - if someone will try to
- * unregister this bdi - it'll wait on this bit.
+ * If the bdi has work to do, but the thread does not
+ * exist - create it.
*/
- set_bit(BDI_pending, &bdi->state);
- break;
+ if (!bdi->wb.task && have_dirty_io) {
+ /*
+ * Set the pending bit - if someone will try to
+ * unregister this bdi - it'll wait on this bit.
+ */
+ set_bit(BDI_pending, &bdi->state);
+ action = FORK_THREAD;
+ break;
+ }
}
spin_unlock_bh(&bdi_lock);
@@ -374,30 +383,30 @@ static int bdi_forker_thread(void *ptr)
if (!list_empty(&me->bdi->work_list))
__set_current_state(TASK_RUNNING);
- if (!fork) {
- unsigned long wait;
+ switch (action) {
+ case FORK_THREAD:
+ __set_current_state(TASK_RUNNING);
+ task = kthread_run(bdi_writeback_thread, &bdi->wb, "flush-%s",
+ dev_name(bdi->dev));
+ if (IS_ERR(task)) {
+ /*
+ * If thread creation fails, force writeout of
+ * the bdi from the thread.
+ */
+ bdi_flush_io(bdi);
+ } else
+ bdi->wb.task = task;
+ break;
- wait = msecs_to_jiffies(dirty_writeback_interval * 10);
- if (wait)
- schedule_timeout(wait);
+ case NO_ACTION:
+ if (dirty_writeback_interval)
+ schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
else
schedule();
try_to_freeze();
+ /* Back to the main loop */
continue;
}
-
- __set_current_state(TASK_RUNNING);
-
- task = kthread_run(bdi_writeback_thread, &bdi->wb, "flush-%s",
- dev_name(bdi->dev));
- if (IS_ERR(task)) {
- /*
- * If thread creation fails, force writeout of the bdi
- * from the thread.
- */
- bdi_flush_io(bdi);
- } else
- bdi->wb.task = task;
}
return 0;
--
GitLab
From fff5b85aa4225a7be157f208277a055822039a9e Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:20 +0300
Subject: [PATCH 394/863] writeback: move bdi threads exiting logic to the
forker thread
Currently, bdi threads can decide to exit if there were no useful activities
for 5 minutes. However, this causes nasty races: we can easily oops in the
'bdi_queue_work()' if the bdi thread decides to exit while we are waking it up.
And even if we do not oops, but the bdi tread exits immediately after we wake
it up, we'd lose the wake-up event and have an unnecessary delay (up to 5 secs)
in the bdi work processing.
This patch makes the forker thread to be the central place which not only
creates bdi threads, but also kills them if they were inactive long enough.
This better design-wise.
Another reason why this change was done is to prepare for the further changes
which will prevent the bdi threads from waking up every 5 sec and wasting
power. Indeed, when the task does not wake up periodically anymore, it won't be
able to exit either.
This patch also moves the the 'wake_up_bit()' call from the bdi thread to the
forker thread as well. So now the forker thread sets the BDI_pending bit, then
forks the task or kills it, then clears the bit and wakes up the waiting
process.
The only process which may wain on the bit is 'bdi_wb_shutdown()'. This
function was changed as well - now it first removes the bdi from the
'bdi_list', then waits on the 'BDI_pending' bit. Once it wakes up, it is
guaranteed that the forker thread won't race with it, because the bdi is not
visible. Note, the forker thread sets the 'BDI_pending' bit under the
'bdi->wb_lock' which is essential for proper serialization.
And additionally, when we change 'bdi->wb.task', we now take the
'bdi->work_lock', to make sure that we do not lose wake-ups which we otherwise
would when raced with, say, 'bdi_queue_work()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 54 +++++++++----------------------------
mm/backing-dev.c | 69 +++++++++++++++++++++++++++++++++++++++--------
2 files changed, 70 insertions(+), 53 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 9f5cab75c1577..905f3ea384888 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -78,21 +78,17 @@ static void bdi_queue_work(struct backing_dev_info *bdi,
spin_lock(&bdi->wb_lock);
list_add_tail(&work->list, &bdi->work_list);
- spin_unlock(&bdi->wb_lock);
-
- /*
- * If the default thread isn't there, make sure we add it. When
- * it gets created and wakes up, we'll run this work.
- */
- if (unlikely(!bdi->wb.task)) {
+ if (bdi->wb.task) {
+ wake_up_process(bdi->wb.task);
+ } else {
+ /*
+ * The bdi thread isn't there, wake up the forker thread which
+ * will create and run it.
+ */
trace_writeback_nothread(bdi, work);
wake_up_process(default_backing_dev_info.wb.task);
- } else {
- struct bdi_writeback *wb = &bdi->wb;
-
- if (wb->task)
- wake_up_process(wb->task);
}
+ spin_unlock(&bdi->wb_lock);
}
static void
@@ -800,7 +796,6 @@ int bdi_writeback_thread(void *data)
{
struct bdi_writeback *wb = data;
struct backing_dev_info *bdi = wb->bdi;
- unsigned long wait_jiffies = -1UL;
long pages_written;
current->flags |= PF_FLUSHER | PF_SWAPWRITE;
@@ -812,13 +807,6 @@ int bdi_writeback_thread(void *data)
*/
set_user_nice(current, 0);
- /*
- * Clear pending bit and wakeup anybody waiting to tear us down
- */
- clear_bit(BDI_pending, &bdi->state);
- smp_mb__after_clear_bit();
- wake_up_bit(&bdi->state, BDI_pending);
-
trace_writeback_thread_start(bdi);
while (!kthread_should_stop()) {
@@ -828,18 +816,6 @@ int bdi_writeback_thread(void *data)
if (pages_written)
wb->last_active = jiffies;
- else if (wait_jiffies != -1UL) {
- unsigned long max_idle;
-
- /*
- * Longest period of inactivity that we tolerate. If we
- * see dirty data again later, the thread will get
- * recreated automatically.
- */
- max_idle = max(5UL * 60 * HZ, wait_jiffies);
- if (time_after(jiffies, max_idle + wb->last_active))
- break;
- }
set_current_state(TASK_INTERRUPTIBLE);
if (!list_empty(&bdi->work_list)) {
@@ -847,21 +823,15 @@ int bdi_writeback_thread(void *data)
continue;
}
- if (dirty_writeback_interval) {
- wait_jiffies = msecs_to_jiffies(dirty_writeback_interval * 10);
- schedule_timeout(wait_jiffies);
- } else
+ if (dirty_writeback_interval)
+ schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
+ else
schedule();
try_to_freeze();
}
- wb->task = NULL;
-
- /*
- * Flush any work that raced with us exiting. No new work
- * will be added, since this bdi isn't discoverable anymore.
- */
+ /* Flush any work that raced with us exiting */
if (!list_empty(&bdi->work_list))
wb_do_writeback(wb, 1);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index e104e32c2ee82..9c1c199f88ce3 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -316,6 +316,18 @@ static void sync_supers_timer_fn(unsigned long unused)
bdi_arm_supers_timer();
}
+/*
+ * Calculate the longest interval (jiffies) bdi threads are allowed to be
+ * inactive.
+ */
+static unsigned long bdi_longest_inactive(void)
+{
+ unsigned long interval;
+
+ interval = msecs_to_jiffies(dirty_writeback_interval * 10);
+ return max(5UL * 60 * HZ, interval);
+}
+
static int bdi_forker_thread(void *ptr)
{
struct bdi_writeback *me = ptr;
@@ -329,11 +341,12 @@ static int bdi_forker_thread(void *ptr)
set_user_nice(current, 0);
for (;;) {
- struct task_struct *task;
+ struct task_struct *task = NULL;
struct backing_dev_info *bdi;
enum {
NO_ACTION, /* Nothing to do */
FORK_THREAD, /* Fork bdi thread */
+ KILL_THREAD, /* Kill inactive bdi thread */
} action = NO_ACTION;
/*
@@ -346,10 +359,6 @@ static int bdi_forker_thread(void *ptr)
spin_lock_bh(&bdi_lock);
set_current_state(TASK_INTERRUPTIBLE);
- /*
- * Check if any existing bdi's have dirty data without
- * a thread registered. If so, set that up.
- */
list_for_each_entry(bdi, &bdi_list, bdi_list) {
bool have_dirty_io;
@@ -376,6 +385,25 @@ static int bdi_forker_thread(void *ptr)
action = FORK_THREAD;
break;
}
+
+ spin_lock(&bdi->wb_lock);
+ /*
+ * If there is no work to do and the bdi thread was
+ * inactive long enough - kill it. The wb_lock is taken
+ * to make sure no-one adds more work to this bdi and
+ * wakes the bdi thread up.
+ */
+ if (bdi->wb.task && !have_dirty_io &&
+ time_after(jiffies, bdi->wb.last_active +
+ bdi_longest_inactive())) {
+ task = bdi->wb.task;
+ bdi->wb.task = NULL;
+ spin_unlock(&bdi->wb_lock);
+ set_bit(BDI_pending, &bdi->state);
+ action = KILL_THREAD;
+ break;
+ }
+ spin_unlock(&bdi->wb_lock);
}
spin_unlock_bh(&bdi_lock);
@@ -394,8 +422,20 @@ static int bdi_forker_thread(void *ptr)
* the bdi from the thread.
*/
bdi_flush_io(bdi);
- } else
+ } else {
+ /*
+ * The spinlock makes sure we do not lose
+ * wake-ups when racing with 'bdi_queue_work()'.
+ */
+ spin_lock(&bdi->wb_lock);
bdi->wb.task = task;
+ spin_unlock(&bdi->wb_lock);
+ }
+ break;
+
+ case KILL_THREAD:
+ __set_current_state(TASK_RUNNING);
+ kthread_stop(task);
break;
case NO_ACTION:
@@ -407,6 +447,13 @@ static int bdi_forker_thread(void *ptr)
/* Back to the main loop */
continue;
}
+
+ /*
+ * Clear pending bit and wakeup anybody waiting to tear us down.
+ */
+ clear_bit(BDI_pending, &bdi->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&bdi->state, BDI_pending);
}
return 0;
@@ -490,15 +537,15 @@ static void bdi_wb_shutdown(struct backing_dev_info *bdi)
return;
/*
- * If setup is pending, wait for that to complete first
+ * Make sure nobody finds us on the bdi_list anymore
*/
- wait_on_bit(&bdi->state, BDI_pending, bdi_sched_wait,
- TASK_UNINTERRUPTIBLE);
+ bdi_remove_from_list(bdi);
/*
- * Make sure nobody finds us on the bdi_list anymore
+ * If setup is pending, wait for that to complete first
*/
- bdi_remove_from_list(bdi);
+ wait_on_bit(&bdi->state, BDI_pending, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
/*
* Finally, kill the kernel thread. We don't need to be RCU
--
GitLab
From 253c34e9b10c30d3064be654b5b78fbc1a8b1896 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:21 +0300
Subject: [PATCH 395/863] writeback: prevent unnecessary bdi threads wakeups
Finally, we can get rid of unnecessary wake-ups in bdi threads, which are very
bad for battery-driven devices.
There are two types of activities bdi threads do:
1. process bdi works from the 'bdi->work_list'
2. periodic write-back
So there are 2 sources of wake-up events for bdi threads:
1. 'bdi_queue_work()' - submits bdi works
2. '__mark_inode_dirty()' - adds dirty I/O to bdi's
The former already has bdi wake-up code. The latter does not, and this patch
adds it.
'__mark_inode_dirty()' is hot-path function, but this patch adds another
'spin_lock(&bdi->wb_lock)' there. However, it is taken only in rare cases when
the bdi has no dirty inodes. So adding this spinlock should be fine and should
not affect performance.
This patch makes sure bdi threads and the forker thread do not wake-up if there
is nothing to do. The forker thread will nevertheless wake up at least every
5 min. to check whether it has to kill a bdi thread. This can also be optimized,
but is not worth it.
This patch also tidies up the warning about unregistered bid, and turns it from
an ugly crocodile to a simple 'WARN()' statement.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 59 ++++++++++++++++++++++++++++++++++++++---------
mm/backing-dev.c | 13 ++++++++---
2 files changed, 58 insertions(+), 14 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 905f3ea384888..55f6e46e06f1c 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -823,10 +823,16 @@ int bdi_writeback_thread(void *data)
continue;
}
- if (dirty_writeback_interval)
+ if (wb_has_dirty_io(wb) && dirty_writeback_interval)
schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
- else
+ else {
+ /*
+ * We have nothing to do, so can go sleep without any
+ * timeout and save power. When a work is queued or
+ * something is made dirty - we will be woken up.
+ */
schedule();
+ }
try_to_freeze();
}
@@ -862,6 +868,26 @@ void wakeup_flusher_threads(long nr_pages)
rcu_read_unlock();
}
+/*
+ * This function is used when the first inode for this bdi is marked dirty. It
+ * wakes-up the corresponding bdi thread which should then take care of the
+ * periodic background write-out of dirty inodes.
+ */
+static void wakeup_bdi_thread(struct backing_dev_info *bdi)
+{
+ spin_lock(&bdi->wb_lock);
+ if (bdi->wb.task)
+ wake_up_process(bdi->wb.task);
+ else
+ /*
+ * When bdi tasks are inactive for long time, they are killed.
+ * In this case we have to wake-up the forker thread which
+ * should create and run the bdi thread.
+ */
+ wake_up_process(default_backing_dev_info.wb.task);
+ spin_unlock(&bdi->wb_lock);
+}
+
static noinline void block_dump___mark_inode_dirty(struct inode *inode)
{
if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
@@ -914,6 +940,8 @@ static noinline void block_dump___mark_inode_dirty(struct inode *inode)
void __mark_inode_dirty(struct inode *inode, int flags)
{
struct super_block *sb = inode->i_sb;
+ struct backing_dev_info *bdi = NULL;
+ bool wakeup_bdi = false;
/*
* Don't do this for I_DIRTY_PAGES - that doesn't actually
@@ -967,22 +995,31 @@ void __mark_inode_dirty(struct inode *inode, int flags)
* reposition it (that would break b_dirty time-ordering).
*/
if (!was_dirty) {
- struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
- struct backing_dev_info *bdi = wb->bdi;
-
- if (bdi_cap_writeback_dirty(bdi) &&
- !test_bit(BDI_registered, &bdi->state)) {
- WARN_ON(1);
- printk(KERN_ERR "bdi-%s not registered\n",
- bdi->name);
+ bdi = inode_to_bdi(inode);
+
+ if (bdi_cap_writeback_dirty(bdi)) {
+ WARN(!test_bit(BDI_registered, &bdi->state),
+ "bdi-%s not registered\n", bdi->name);
+
+ /*
+ * If this is the first dirty inode for this
+ * bdi, we have to wake-up the corresponding
+ * bdi thread to make sure background
+ * write-back happens later.
+ */
+ if (!wb_has_dirty_io(&bdi->wb))
+ wakeup_bdi = true;
}
inode->dirtied_when = jiffies;
- list_move(&inode->i_list, &wb->b_dirty);
+ list_move(&inode->i_list, &bdi->wb.b_dirty);
}
}
out:
spin_unlock(&inode_lock);
+
+ if (wakeup_bdi)
+ wakeup_bdi_thread(bdi);
}
EXPORT_SYMBOL(__mark_inode_dirty);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 9c1c199f88ce3..a9a08d88a7450 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -439,10 +439,17 @@ static int bdi_forker_thread(void *ptr)
break;
case NO_ACTION:
- if (dirty_writeback_interval)
- schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
+ if (!wb_has_dirty_io(me) || !dirty_writeback_interval)
+ /*
+ * There are no dirty data. The only thing we
+ * should now care about is checking for
+ * inactive bdi threads and killing them. Thus,
+ * let's sleep for longer time, save energy and
+ * be friendly for battery-driven devices.
+ */
+ schedule_timeout(bdi_longest_inactive());
else
- schedule();
+ schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
try_to_freeze();
/* Back to the main loop */
continue;
--
GitLab
From 6467716a37673e8d47b4984eb19839bdad0a8353 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:22 +0300
Subject: [PATCH 396/863] writeback: optimize periodic bdi thread wakeups
Whe the first inode for a bdi is marked dirty, we wake up the bdi thread which
should take care of the periodic background write-out. However, the write-out
will actually start only 'dirty_writeback_interval' centisecs later, so we can
delay the wake-up.
This change was requested by Nick Piggin who pointed out that if we delay the
wake-up, we weed out 2 unnecessary contex switches, which matters because
'__mark_inode_dirty()' is a hot-path function.
This patch introduces a new function - 'bdi_wakeup_thread_delayed()', which
sets up a timer to wake-up the bdi thread and returns. So the wake-up is
delayed.
We also delete the timer in bdi threads just before writing-back. And
synchronously delete it when unregistering bdi. At the unregister point the bdi
does not have any users, so no one can arm it again.
Since now we take 'bdi->wb_lock' in the timer, which can execute in softirq
context, we have to use 'spin_lock_bh()' for 'bdi->wb_lock'. This patch makes
this change as well.
This patch also moves the 'bdi_wb_init()' function down in the file to avoid
forward-declaration of 'bdi_wakeup_thread_delayed()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
fs/fs-writeback.c | 36 ++++++------------
include/linux/backing-dev.h | 2 +
mm/backing-dev.c | 73 +++++++++++++++++++++++++++++--------
3 files changed, 70 insertions(+), 41 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 55f6e46e06f1c..bfa2df2c7ce27 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -76,7 +76,7 @@ static void bdi_queue_work(struct backing_dev_info *bdi,
{
trace_writeback_queue(bdi, work);
- spin_lock(&bdi->wb_lock);
+ spin_lock_bh(&bdi->wb_lock);
list_add_tail(&work->list, &bdi->work_list);
if (bdi->wb.task) {
wake_up_process(bdi->wb.task);
@@ -88,7 +88,7 @@ static void bdi_queue_work(struct backing_dev_info *bdi,
trace_writeback_nothread(bdi, work);
wake_up_process(default_backing_dev_info.wb.task);
}
- spin_unlock(&bdi->wb_lock);
+ spin_unlock_bh(&bdi->wb_lock);
}
static void
@@ -704,13 +704,13 @@ get_next_work_item(struct backing_dev_info *bdi)
{
struct wb_writeback_work *work = NULL;
- spin_lock(&bdi->wb_lock);
+ spin_lock_bh(&bdi->wb_lock);
if (!list_empty(&bdi->work_list)) {
work = list_entry(bdi->work_list.next,
struct wb_writeback_work, list);
list_del_init(&work->list);
}
- spin_unlock(&bdi->wb_lock);
+ spin_unlock_bh(&bdi->wb_lock);
return work;
}
@@ -810,6 +810,12 @@ int bdi_writeback_thread(void *data)
trace_writeback_thread_start(bdi);
while (!kthread_should_stop()) {
+ /*
+ * Remove own delayed wake-up timer, since we are already awake
+ * and we'll take care of the preriodic write-back.
+ */
+ del_timer(&wb->wakeup_timer);
+
pages_written = wb_do_writeback(wb, 0);
trace_writeback_pages_written(pages_written);
@@ -868,26 +874,6 @@ void wakeup_flusher_threads(long nr_pages)
rcu_read_unlock();
}
-/*
- * This function is used when the first inode for this bdi is marked dirty. It
- * wakes-up the corresponding bdi thread which should then take care of the
- * periodic background write-out of dirty inodes.
- */
-static void wakeup_bdi_thread(struct backing_dev_info *bdi)
-{
- spin_lock(&bdi->wb_lock);
- if (bdi->wb.task)
- wake_up_process(bdi->wb.task);
- else
- /*
- * When bdi tasks are inactive for long time, they are killed.
- * In this case we have to wake-up the forker thread which
- * should create and run the bdi thread.
- */
- wake_up_process(default_backing_dev_info.wb.task);
- spin_unlock(&bdi->wb_lock);
-}
-
static noinline void block_dump___mark_inode_dirty(struct inode *inode)
{
if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
@@ -1019,7 +1005,7 @@ void __mark_inode_dirty(struct inode *inode, int flags)
spin_unlock(&inode_lock);
if (wakeup_bdi)
- wakeup_bdi_thread(bdi);
+ bdi_wakeup_thread_delayed(bdi);
}
EXPORT_SYMBOL(__mark_inode_dirty);
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 71b6223e0a776..7628219e5386c 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -52,6 +52,7 @@ struct bdi_writeback {
unsigned long last_active; /* last time bdi thread was active */
struct task_struct *task; /* writeback thread */
+ struct timer_list wakeup_timer; /* used for delayed bdi thread wakeup */
struct list_head b_dirty; /* dirty inodes */
struct list_head b_io; /* parked for writeback */
struct list_head b_more_io; /* parked for more writeback */
@@ -105,6 +106,7 @@ void bdi_start_background_writeback(struct backing_dev_info *bdi);
int bdi_writeback_thread(void *data);
int bdi_has_dirty_io(struct backing_dev_info *bdi);
void bdi_arm_supers_timer(void);
+void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi);
extern spinlock_t bdi_lock;
extern struct list_head bdi_list;
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index a9a08d88a7450..cfff7225138c2 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -248,17 +248,6 @@ static int __init default_bdi_init(void)
}
subsys_initcall(default_bdi_init);
-static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
-{
- memset(wb, 0, sizeof(*wb));
-
- wb->bdi = bdi;
- wb->last_old_flush = jiffies;
- INIT_LIST_HEAD(&wb->b_dirty);
- INIT_LIST_HEAD(&wb->b_io);
- INIT_LIST_HEAD(&wb->b_more_io);
-}
-
int bdi_has_dirty_io(struct backing_dev_info *bdi)
{
return wb_has_dirty_io(&bdi->wb);
@@ -316,6 +305,43 @@ static void sync_supers_timer_fn(unsigned long unused)
bdi_arm_supers_timer();
}
+static void wakeup_timer_fn(unsigned long data)
+{
+ struct backing_dev_info *bdi = (struct backing_dev_info *)data;
+
+ spin_lock_bh(&bdi->wb_lock);
+ if (bdi->wb.task) {
+ wake_up_process(bdi->wb.task);
+ } else {
+ /*
+ * When bdi tasks are inactive for long time, they are killed.
+ * In this case we have to wake-up the forker thread which
+ * should create and run the bdi thread.
+ */
+ wake_up_process(default_backing_dev_info.wb.task);
+ }
+ spin_unlock_bh(&bdi->wb_lock);
+}
+
+/*
+ * This function is used when the first inode for this bdi is marked dirty. It
+ * wakes-up the corresponding bdi thread which should then take care of the
+ * periodic background write-out of dirty inodes. Since the write-out would
+ * starts only 'dirty_writeback_interval' centisecs from now anyway, we just
+ * set up a timer which wakes the bdi thread up later.
+ *
+ * Note, we wouldn't bother setting up the timer, but this function is on the
+ * fast-path (used by '__mark_inode_dirty()'), so we save few context switches
+ * by delaying the wake-up.
+ */
+void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi)
+{
+ unsigned long timeout;
+
+ timeout = msecs_to_jiffies(dirty_writeback_interval * 10);
+ mod_timer(&bdi->wb.wakeup_timer, jiffies + timeout);
+}
+
/*
* Calculate the longest interval (jiffies) bdi threads are allowed to be
* inactive.
@@ -353,8 +379,10 @@ static int bdi_forker_thread(void *ptr)
* Temporary measure, we want to make sure we don't see
* dirty data on the default backing_dev_info
*/
- if (wb_has_dirty_io(me) || !list_empty(&me->bdi->work_list))
+ if (wb_has_dirty_io(me) || !list_empty(&me->bdi->work_list)) {
+ del_timer(&me->wakeup_timer);
wb_do_writeback(me, 0);
+ }
spin_lock_bh(&bdi_lock);
set_current_state(TASK_INTERRUPTIBLE);
@@ -386,7 +414,7 @@ static int bdi_forker_thread(void *ptr)
break;
}
- spin_lock(&bdi->wb_lock);
+ spin_lock_bh(&bdi->wb_lock);
/*
* If there is no work to do and the bdi thread was
* inactive long enough - kill it. The wb_lock is taken
@@ -403,7 +431,7 @@ static int bdi_forker_thread(void *ptr)
action = KILL_THREAD;
break;
}
- spin_unlock(&bdi->wb_lock);
+ spin_unlock_bh(&bdi->wb_lock);
}
spin_unlock_bh(&bdi_lock);
@@ -427,9 +455,9 @@ static int bdi_forker_thread(void *ptr)
* The spinlock makes sure we do not lose
* wake-ups when racing with 'bdi_queue_work()'.
*/
- spin_lock(&bdi->wb_lock);
+ spin_lock_bh(&bdi->wb_lock);
bdi->wb.task = task;
- spin_unlock(&bdi->wb_lock);
+ spin_unlock_bh(&bdi->wb_lock);
}
break;
@@ -586,6 +614,7 @@ void bdi_unregister(struct backing_dev_info *bdi)
if (bdi->dev) {
trace_writeback_bdi_unregister(bdi);
bdi_prune_sb(bdi);
+ del_timer_sync(&bdi->wb.wakeup_timer);
if (!bdi_cap_flush_forker(bdi))
bdi_wb_shutdown(bdi);
@@ -596,6 +625,18 @@ void bdi_unregister(struct backing_dev_info *bdi)
}
EXPORT_SYMBOL(bdi_unregister);
+static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
+{
+ memset(wb, 0, sizeof(*wb));
+
+ wb->bdi = bdi;
+ wb->last_old_flush = jiffies;
+ INIT_LIST_HEAD(&wb->b_dirty);
+ INIT_LIST_HEAD(&wb->b_io);
+ INIT_LIST_HEAD(&wb->b_more_io);
+ setup_timer(&wb->wakeup_timer, wakeup_timer_fn, (unsigned long)bdi);
+}
+
int bdi_init(struct backing_dev_info *bdi)
{
int i, err;
--
GitLab
From b5048a6cb5455a16bdff26a4c5ae9534f070d94c Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:23 +0300
Subject: [PATCH 397/863] writeback: remove unnecessary init_timer call
The 'setup_timer()' function also calls 'init_timer()', so the extra
'init_timer()' call is not needed. Indeed, 'setup_timer()' is basically
'init_timer()' plus callback function and data pointers initialization.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
mm/backing-dev.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index cfff7225138c2..99890831d5571 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -236,7 +236,6 @@ static int __init default_bdi_init(void)
sync_supers_tsk = kthread_run(bdi_sync_supers, NULL, "sync_supers");
BUG_ON(IS_ERR(sync_supers_tsk));
- init_timer(&sync_supers_timer);
setup_timer(&sync_supers_timer, sync_supers_timer_fn, 0);
bdi_arm_supers_timer();
--
GitLab
From 603320239fb436f175c8b6bfa43d5023c47a6dc2 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:24 +0300
Subject: [PATCH 398/863] writeback: add new tracepoints
Add 2 new trace points to the periodic write-back wake up case, just like we do
in the 'bdi_queue_work()' function. Namely, introduce:
1. trace_writeback_wake_thread(bdi)
2. trace_writeback_wake_forker_thread(bdi)
The first event is triggered every time we wake up a bdi thread to start
periodic background write-out. The second event is triggered only when the bdi
thread does not exist and should be created by the forker thread.
This patch was suggested by Dave Chinner and Christoph Hellwig.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/trace/events/writeback.h | 2 ++
mm/backing-dev.c | 2 ++
2 files changed, 4 insertions(+)
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index 84ab72df953cb..f345f66ae9d10 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -81,6 +81,8 @@ DEFINE_EVENT(writeback_class, name, \
TP_ARGS(bdi))
DEFINE_WRITEBACK_EVENT(writeback_nowork);
+DEFINE_WRITEBACK_EVENT(writeback_wake_thread);
+DEFINE_WRITEBACK_EVENT(writeback_wake_forker_thread);
DEFINE_WRITEBACK_EVENT(writeback_bdi_register);
DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
DEFINE_WRITEBACK_EVENT(writeback_thread_start);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 99890831d5571..9008c4e207f66 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -310,6 +310,7 @@ static void wakeup_timer_fn(unsigned long data)
spin_lock_bh(&bdi->wb_lock);
if (bdi->wb.task) {
+ trace_writeback_wake_thread(bdi);
wake_up_process(bdi->wb.task);
} else {
/*
@@ -317,6 +318,7 @@ static void wakeup_timer_fn(unsigned long data)
* In this case we have to wake-up the forker thread which
* should create and run the bdi thread.
*/
+ trace_writeback_wake_forker_thread(bdi);
wake_up_process(default_backing_dev_info.wb.task);
}
spin_unlock_bh(&bdi->wb_lock);
--
GitLab
From c284de61db31669cce547ffc99efda971146719d Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 25 Jul 2010 14:29:25 +0300
Subject: [PATCH 399/863] writeback: cleanup bdi_register
This patch makes sure we first initialize everything and set the BDI_registered
flag, and only after this we add the bdi to 'bdi_list'. Current code adds the
bdi to the list too early, and as a result I the
WARN(!test_bit(BDI_registered, &bdi->state)
in bdi forker is triggered. Also, it is in general good practice to make things
visible only when they are fully initialized.
Also, this patch does few micro clean-ups:
1. Removes the 'exit' label which does not do anything, just returns. This
allows to get rid of few braces and 'ret' variable and make the code smaller.
2. If 'kthread_run()' fails, remove the error code it returns, not hard-coded
'-ENOMEM'. Theoretically, some day 'kthread_run()' can return something
else. Also, in case of failure it is not necessary to set 'bdi->wb.task' to
NULL.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
mm/backing-dev.c | 30 +++++++++++-------------------
1 file changed, 11 insertions(+), 19 deletions(-)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 9008c4e207f66..0b8ee66993dda 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -511,23 +511,16 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...)
{
va_list args;
- int ret = 0;
struct device *dev;
if (bdi->dev) /* The driver needs to use separate queues per device */
- goto exit;
+ return 0;
va_start(args, fmt);
dev = device_create_vargs(bdi_class, parent, MKDEV(0, 0), bdi, fmt, args);
va_end(args);
- if (IS_ERR(dev)) {
- ret = PTR_ERR(dev);
- goto exit;
- }
-
- spin_lock_bh(&bdi_lock);
- list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
- spin_unlock_bh(&bdi_lock);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
bdi->dev = dev;
@@ -541,20 +534,19 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
wb->task = kthread_run(bdi_forker_thread, wb, "bdi-%s",
dev_name(dev));
- if (IS_ERR(wb->task)) {
- wb->task = NULL;
- ret = -ENOMEM;
-
- bdi_remove_from_list(bdi);
- goto exit;
- }
+ if (IS_ERR(wb->task))
+ return PTR_ERR(wb->task);
}
bdi_debug_register(bdi, dev_name(dev));
set_bit(BDI_registered, &bdi->state);
+
+ spin_lock_bh(&bdi_lock);
+ list_add_tail_rcu(&bdi->bdi_list, &bdi_list);
+ spin_unlock_bh(&bdi_lock);
+
trace_writeback_bdi_register(bdi);
-exit:
- return ret;
+ return 0;
}
EXPORT_SYMBOL(bdi_register);
--
GitLab
From 6710a5760355be8f2e51682f41b0d3fc76550309 Mon Sep 17 00:00:00 2001
From: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon, 19 Jul 2010 15:04:57 +0200
Subject: [PATCH 400/863] drbd: Disable delay probes for the upcomming release
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/drbd/drbd_main.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index d2b6764a7b1f2..0c1e84a751d70 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2371,11 +2371,7 @@ static int _drbd_send_zc_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e)
static void consider_delay_probes(struct drbd_conf *mdev)
{
- if (mdev->state.conn != C_SYNC_SOURCE || mdev->agreed_pro_version < 93)
- return;
-
- if (mdev->dp_volume_last + mdev->sync_conf.dp_volume * 2 < mdev->send_cnt)
- drbd_send_delay_probes(mdev);
+ return;
}
static int w_delay_probes(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
--
GitLab
From 85f4cc17a62c3ac9edeaf120cdae7261df458053 Mon Sep 17 00:00:00 2001
From: Philipp Reisner <philipp.reisner@linbit.com>
Date: Tue, 29 Jun 2010 17:35:34 +0200
Subject: [PATCH 401/863] drbd: Initialize all members of sync_conf to their
defaults [Bugz 315]
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/drbd/drbd_main.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 0c1e84a751d70..668f06378214e 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2660,9 +2660,24 @@ static void drbd_unplug_fn(struct request_queue *q)
static void drbd_set_defaults(struct drbd_conf *mdev)
{
- mdev->sync_conf.after = DRBD_AFTER_DEF;
- mdev->sync_conf.rate = DRBD_RATE_DEF;
- mdev->sync_conf.al_extents = DRBD_AL_EXTENTS_DEF;
+ /* This way we get a compile error when sync_conf grows,
+ and we forgot to initialize it here */
+ mdev->sync_conf = (struct syncer_conf) {
+ /* .rate = */ DRBD_RATE_DEF,
+ /* .after = */ DRBD_AFTER_DEF,
+ /* .al_extents = */ DRBD_AL_EXTENTS_DEF,
+ /* .dp_volume = */ DRBD_DP_VOLUME_DEF,
+ /* .dp_interval = */ DRBD_DP_INTERVAL_DEF,
+ /* .throttle_th = */ DRBD_RS_THROTTLE_TH_DEF,
+ /* .hold_off_th = */ DRBD_RS_HOLD_OFF_TH_DEF,
+ /* .verify_alg = */ {}, 0,
+ /* .cpu_mask = */ {}, 0,
+ /* .csums_alg = */ {}, 0,
+ /* .use_rle = */ 0
+ };
+
+ /* Have to use that way, because the layout differs between
+ big endian and little endian */
mdev->state = (union drbd_state) {
{ .role = R_SECONDARY,
.peer = R_UNKNOWN,
--
GitLab
From e7f52dfb4f378ea1bbfd4476f4e8ba42f5fb332c Mon Sep 17 00:00:00 2001
From: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Tue, 3 Aug 2010 20:20:20 +0200
Subject: [PATCH 402/863] drbd: revert "delay probes", feature is being
re-implemented differently
It was a now abandoned attempt to throttle resync bandwidth
based on the delay it causes on the bulk data socket.
It has no userbase yet, and has been disabled by
9173465ccb51c09cc3102a10af93e9f469a0af6f already.
This removes the now unused code.
The basic feature, namely using up "idle" bandwith
of network and disk IO subsystem, with minimal impact
to application IO, is being reimplemented differently.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/drbd/drbd_int.h | 16 +---
drivers/block/drbd/drbd_main.c | 75 -------------------
drivers/block/drbd/drbd_nl.c | 4 -
drivers/block/drbd/drbd_proc.c | 19 +----
drivers/block/drbd/drbd_receiver.c | 113 +++++------------------------
drivers/block/drbd/drbd_worker.c | 15 +---
include/linux/drbd.h | 2 +-
include/linux/drbd_nl.h | 9 ++-
8 files changed, 28 insertions(+), 225 deletions(-)
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 485ed8c7d6239..352441b0f92f8 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -550,12 +550,6 @@ struct p_delay_probe {
u32 offset; /* usecs the probe got sent after the reference time point */
} __packed;
-struct delay_probe {
- struct list_head list;
- unsigned int seq_num;
- struct timeval time;
-};
-
/* DCBP: Drbd Compressed Bitmap Packet ... */
static inline enum drbd_bitmap_code
DCBP_get_code(struct p_compressed_bm *p)
@@ -942,11 +936,9 @@ struct drbd_conf {
unsigned int ko_count;
struct drbd_work resync_work,
unplug_work,
- md_sync_work,
- delay_probe_work;
+ md_sync_work;
struct timer_list resync_timer;
struct timer_list md_sync_timer;
- struct timer_list delay_probe_timer;
/* Used after attach while negotiating new disk state. */
union drbd_state new_state_tmp;
@@ -1062,12 +1054,6 @@ struct drbd_conf {
u64 ed_uuid; /* UUID of the exposed data */
struct mutex state_mutex;
char congestion_reason; /* Why we where congested... */
- struct list_head delay_probes; /* protected by peer_seq_lock */
- int data_delay; /* Delay of packets on the data-sock behind meta-sock */
- unsigned int delay_seq; /* To generate sequence numbers of delay probes */
- struct timeval dps_time; /* delay-probes-start-time */
- unsigned int dp_volume_last; /* send_cnt of last delay probe */
- int c_sync_rate; /* current resync rate after delay_probe magic */
};
static inline struct drbd_conf *minor_to_mdev(unsigned int minor)
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 668f06378214e..fa650dd85b909 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2184,43 +2184,6 @@ int drbd_send_ov_request(struct drbd_conf *mdev, sector_t sector, int size)
return ok;
}
-static int drbd_send_delay_probe(struct drbd_conf *mdev, struct drbd_socket *ds)
-{
- struct p_delay_probe dp;
- int offset, ok = 0;
- struct timeval now;
-
- mutex_lock(&ds->mutex);
- if (likely(ds->socket)) {
- do_gettimeofday(&now);
- offset = now.tv_usec - mdev->dps_time.tv_usec +
- (now.tv_sec - mdev->dps_time.tv_sec) * 1000000;
- dp.seq_num = cpu_to_be32(mdev->delay_seq);
- dp.offset = cpu_to_be32(offset);
-
- ok = _drbd_send_cmd(mdev, ds->socket, P_DELAY_PROBE,
- (struct p_header *)&dp, sizeof(dp), 0);
- }
- mutex_unlock(&ds->mutex);
-
- return ok;
-}
-
-static int drbd_send_delay_probes(struct drbd_conf *mdev)
-{
- int ok;
-
- mdev->delay_seq++;
- do_gettimeofday(&mdev->dps_time);
- ok = drbd_send_delay_probe(mdev, &mdev->meta);
- ok = ok && drbd_send_delay_probe(mdev, &mdev->data);
-
- mdev->dp_volume_last = mdev->send_cnt;
- mod_timer(&mdev->delay_probe_timer, jiffies + mdev->sync_conf.dp_interval * HZ / 10);
-
- return ok;
-}
-
/* called on sndtimeo
* returns FALSE if we should retry,
* TRUE if we think connection is dead
@@ -2369,27 +2332,6 @@ static int _drbd_send_zc_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e)
return 1;
}
-static void consider_delay_probes(struct drbd_conf *mdev)
-{
- return;
-}
-
-static int w_delay_probes(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
- if (!cancel && mdev->state.conn == C_SYNC_SOURCE)
- drbd_send_delay_probes(mdev);
-
- return 1;
-}
-
-static void delay_probe_timer_fn(unsigned long data)
-{
- struct drbd_conf *mdev = (struct drbd_conf *) data;
-
- if (list_empty(&mdev->delay_probe_work.list))
- drbd_queue_work(&mdev->data.work, &mdev->delay_probe_work);
-}
-
/* Used to send write requests
* R_PRIMARY -> Peer (P_DATA)
*/
@@ -2453,9 +2395,6 @@ int drbd_send_dblock(struct drbd_conf *mdev, struct drbd_request *req)
drbd_put_data_sock(mdev);
- if (ok)
- consider_delay_probes(mdev);
-
return ok;
}
@@ -2502,9 +2441,6 @@ int drbd_send_block(struct drbd_conf *mdev, enum drbd_packets cmd,
drbd_put_data_sock(mdev);
- if (ok)
- consider_delay_probes(mdev);
-
return ok;
}
@@ -2666,10 +2602,6 @@ static void drbd_set_defaults(struct drbd_conf *mdev)
/* .rate = */ DRBD_RATE_DEF,
/* .after = */ DRBD_AFTER_DEF,
/* .al_extents = */ DRBD_AL_EXTENTS_DEF,
- /* .dp_volume = */ DRBD_DP_VOLUME_DEF,
- /* .dp_interval = */ DRBD_DP_INTERVAL_DEF,
- /* .throttle_th = */ DRBD_RS_THROTTLE_TH_DEF,
- /* .hold_off_th = */ DRBD_RS_HOLD_OFF_TH_DEF,
/* .verify_alg = */ {}, 0,
/* .cpu_mask = */ {}, 0,
/* .csums_alg = */ {}, 0,
@@ -2736,24 +2668,17 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
INIT_LIST_HEAD(&mdev->unplug_work.list);
INIT_LIST_HEAD(&mdev->md_sync_work.list);
INIT_LIST_HEAD(&mdev->bm_io_work.w.list);
- INIT_LIST_HEAD(&mdev->delay_probes);
- INIT_LIST_HEAD(&mdev->delay_probe_work.list);
mdev->resync_work.cb = w_resync_inactive;
mdev->unplug_work.cb = w_send_write_hint;
mdev->md_sync_work.cb = w_md_sync;
mdev->bm_io_work.w.cb = w_bitmap_io;
- mdev->delay_probe_work.cb = w_delay_probes;
init_timer(&mdev->resync_timer);
init_timer(&mdev->md_sync_timer);
- init_timer(&mdev->delay_probe_timer);
mdev->resync_timer.function = resync_timer_fn;
mdev->resync_timer.data = (unsigned long) mdev;
mdev->md_sync_timer.function = md_sync_timer_fn;
mdev->md_sync_timer.data = (unsigned long) mdev;
- mdev->delay_probe_timer.function = delay_probe_timer_fn;
- mdev->delay_probe_timer.data = (unsigned long) mdev;
-
init_waitqueue_head(&mdev->misc_wait);
init_waitqueue_head(&mdev->state_wait);
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 2151f18b21deb..73131c5ae339b 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1557,10 +1557,6 @@ static int drbd_nl_syncer_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *n
sc.rate = DRBD_RATE_DEF;
sc.after = DRBD_AFTER_DEF;
sc.al_extents = DRBD_AL_EXTENTS_DEF;
- sc.dp_volume = DRBD_DP_VOLUME_DEF;
- sc.dp_interval = DRBD_DP_INTERVAL_DEF;
- sc.throttle_th = DRBD_RS_THROTTLE_TH_DEF;
- sc.hold_off_th = DRBD_RS_HOLD_OFF_TH_DEF;
} else
memcpy(&sc, &mdev->sync_conf, sizeof(struct syncer_conf));
diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c
index d0f1767ea4c30..be3374b684605 100644
--- a/drivers/block/drbd/drbd_proc.c
+++ b/drivers/block/drbd/drbd_proc.c
@@ -73,21 +73,14 @@ static void drbd_syncer_progress(struct drbd_conf *mdev, struct seq_file *seq)
seq_printf(seq, "sync'ed:%3u.%u%% ", res / 10, res % 10);
/* if more than 1 GB display in MB */
if (mdev->rs_total > 0x100000L)
- seq_printf(seq, "(%lu/%lu)M",
+ seq_printf(seq, "(%lu/%lu)M\n\t",
(unsigned long) Bit2KB(rs_left >> 10),
(unsigned long) Bit2KB(mdev->rs_total >> 10));
else
- seq_printf(seq, "(%lu/%lu)K",
+ seq_printf(seq, "(%lu/%lu)K\n\t",
(unsigned long) Bit2KB(rs_left),
(unsigned long) Bit2KB(mdev->rs_total));
- if (mdev->state.conn == C_SYNC_TARGET)
- seq_printf(seq, " queue_delay: %d.%d ms\n\t",
- mdev->data_delay / 1000,
- (mdev->data_delay % 1000) / 100);
- else if (mdev->state.conn == C_SYNC_SOURCE)
- seq_printf(seq, " delay_probe: %u\n\t", mdev->delay_seq);
-
/* see drivers/md/md.c
* We do not want to overflow, so the order of operands and
* the * 100 / 100 trick are important. We do a +1 to be
@@ -135,14 +128,6 @@ static void drbd_syncer_progress(struct drbd_conf *mdev, struct seq_file *seq)
else
seq_printf(seq, " (%ld)", dbdt);
- if (mdev->state.conn == C_SYNC_TARGET) {
- if (mdev->c_sync_rate > 1000)
- seq_printf(seq, " want: %d,%03d",
- mdev->c_sync_rate / 1000, mdev->c_sync_rate % 1000);
- else
- seq_printf(seq, " want: %d", mdev->c_sync_rate);
- }
-
seq_printf(seq, " K/sec\n");
}
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index cba1deb7b2711..20abef531c998 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -3555,14 +3555,15 @@ static int receive_bitmap(struct drbd_conf *mdev, struct p_header *h)
return ok;
}
-static int receive_skip(struct drbd_conf *mdev, struct p_header *h)
+static int receive_skip_(struct drbd_conf *mdev, struct p_header *h, int silent)
{
/* TODO zero copy sink :) */
static char sink[128];
int size, want, r;
- dev_warn(DEV, "skipping unknown optional packet type %d, l: %d!\n",
- h->command, h->length);
+ if (!silent)
+ dev_warn(DEV, "skipping unknown optional packet type %d, l: %d!\n",
+ h->command, h->length);
size = h->length;
while (size > 0) {
@@ -3574,101 +3575,25 @@ static int receive_skip(struct drbd_conf *mdev, struct p_header *h)
return size == 0;
}
-static int receive_UnplugRemote(struct drbd_conf *mdev, struct p_header *h)
-{
- if (mdev->state.disk >= D_INCONSISTENT)
- drbd_kick_lo(mdev);
-
- /* Make sure we've acked all the TCP data associated
- * with the data requests being unplugged */
- drbd_tcp_quickack(mdev->data.socket);
-
- return TRUE;
-}
-
-static void timeval_sub_us(struct timeval* tv, unsigned int us)
+static int receive_skip(struct drbd_conf *mdev, struct p_header *h)
{
- tv->tv_sec -= us / 1000000;
- us = us % 1000000;
- if (tv->tv_usec > us) {
- tv->tv_usec += 1000000;
- tv->tv_sec--;
- }
- tv->tv_usec -= us;
+ return receive_skip_(mdev, h, 0);
}
-static void got_delay_probe(struct drbd_conf *mdev, int from, struct p_delay_probe *p)
+static int receive_skip_silent(struct drbd_conf *mdev, struct p_header *h)
{
- struct delay_probe *dp;
- struct list_head *le;
- struct timeval now;
- int seq_num;
- int offset;
- int data_delay;
-
- seq_num = be32_to_cpu(p->seq_num);
- offset = be32_to_cpu(p->offset);
-
- spin_lock(&mdev->peer_seq_lock);
- if (!list_empty(&mdev->delay_probes)) {
- if (from == USE_DATA_SOCKET)
- le = mdev->delay_probes.next;
- else
- le = mdev->delay_probes.prev;
-
- dp = list_entry(le, struct delay_probe, list);
-
- if (dp->seq_num == seq_num) {
- list_del(le);
- spin_unlock(&mdev->peer_seq_lock);
- do_gettimeofday(&now);
- timeval_sub_us(&now, offset);
- data_delay =
- now.tv_usec - dp->time.tv_usec +
- (now.tv_sec - dp->time.tv_sec) * 1000000;
-
- if (data_delay > 0)
- mdev->data_delay = data_delay;
-
- kfree(dp);
- return;
- }
-
- if (dp->seq_num > seq_num) {
- spin_unlock(&mdev->peer_seq_lock);
- dev_warn(DEV, "Previous allocation failure of struct delay_probe?\n");
- return; /* Do not alloca a struct delay_probe.... */
- }
- }
- spin_unlock(&mdev->peer_seq_lock);
-
- dp = kmalloc(sizeof(struct delay_probe), GFP_NOIO);
- if (!dp) {
- dev_warn(DEV, "Failed to allocate a struct delay_probe, do not worry.\n");
- return;
- }
-
- dp->seq_num = seq_num;
- do_gettimeofday(&dp->time);
- timeval_sub_us(&dp->time, offset);
-
- spin_lock(&mdev->peer_seq_lock);
- if (from == USE_DATA_SOCKET)
- list_add(&dp->list, &mdev->delay_probes);
- else
- list_add_tail(&dp->list, &mdev->delay_probes);
- spin_unlock(&mdev->peer_seq_lock);
+ return receive_skip_(mdev, h, 1);
}
-static int receive_delay_probe(struct drbd_conf *mdev, struct p_header *h)
+static int receive_UnplugRemote(struct drbd_conf *mdev, struct p_header *h)
{
- struct p_delay_probe *p = (struct p_delay_probe *)h;
+ if (mdev->state.disk >= D_INCONSISTENT)
+ drbd_kick_lo(mdev);
- ERR_IF(h->length != (sizeof(*p)-sizeof(*h))) return FALSE;
- if (drbd_recv(mdev, h->payload, h->length) != h->length)
- return FALSE;
+ /* Make sure we've acked all the TCP data associated
+ * with the data requests being unplugged */
+ drbd_tcp_quickack(mdev->data.socket);
- got_delay_probe(mdev, USE_DATA_SOCKET, p);
return TRUE;
}
@@ -3695,7 +3620,7 @@ static drbd_cmd_handler_f drbd_default_handler[] = {
[P_OV_REQUEST] = receive_DataRequest,
[P_OV_REPLY] = receive_DataRequest,
[P_CSUM_RS_REQUEST] = receive_DataRequest,
- [P_DELAY_PROBE] = receive_delay_probe,
+ [P_DELAY_PROBE] = receive_skip_silent,
/* anything missing from this table is in
* the asender_tbl, see get_asender_cmd */
[P_MAX_CMD] = NULL,
@@ -4472,11 +4397,9 @@ static int got_OVResult(struct drbd_conf *mdev, struct p_header *h)
return TRUE;
}
-static int got_delay_probe_m(struct drbd_conf *mdev, struct p_header *h)
+static int got_something_to_ignore_m(struct drbd_conf *mdev, struct p_header *h)
{
- struct p_delay_probe *p = (struct p_delay_probe *)h;
-
- got_delay_probe(mdev, USE_META_SOCKET, p);
+ /* IGNORE */
return TRUE;
}
@@ -4504,7 +4427,7 @@ static struct asender_cmd *get_asender_cmd(int cmd)
[P_BARRIER_ACK] = { sizeof(struct p_barrier_ack), got_BarrierAck },
[P_STATE_CHG_REPLY] = { sizeof(struct p_req_state_reply), got_RqSReply },
[P_RS_IS_IN_SYNC] = { sizeof(struct p_block_ack), got_IsInSync },
- [P_DELAY_PROBE] = { sizeof(struct p_delay_probe), got_delay_probe_m },
+ [P_DELAY_PROBE] = { sizeof(struct p_delay_probe), got_something_to_ignore_m },
[P_MAX_CMD] = { 0, NULL },
};
if (cmd > P_MAX_CMD || asender_tbl[cmd].process == NULL)
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index b623ceee2a4a6..ca4a16cea2d89 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -424,18 +424,6 @@ void resync_timer_fn(unsigned long data)
drbd_queue_work(&mdev->data.work, &mdev->resync_work);
}
-static int calc_resync_rate(struct drbd_conf *mdev)
-{
- int d = mdev->data_delay / 1000; /* us -> ms */
- int td = mdev->sync_conf.throttle_th * 100; /* 0.1s -> ms */
- int hd = mdev->sync_conf.hold_off_th * 100; /* 0.1s -> ms */
- int cr = mdev->sync_conf.rate;
-
- return d <= td ? cr :
- d >= hd ? 0 :
- cr + (cr * (td - d) / (hd - td));
-}
-
int w_make_resync_request(struct drbd_conf *mdev,
struct drbd_work *w, int cancel)
{
@@ -473,8 +461,7 @@ int w_make_resync_request(struct drbd_conf *mdev,
max_segment_size = mdev->agreed_pro_version < 94 ?
queue_max_segment_size(mdev->rq_queue) : DRBD_MAX_SEGMENT_SIZE;
- mdev->c_sync_rate = calc_resync_rate(mdev);
- number = SLEEP_TIME * mdev->c_sync_rate / ((BM_BLOCK_SIZE / 1024) * HZ);
+ number = SLEEP_TIME * mdev->sync_conf.rate / ((BM_BLOCK_SIZE / 1024) * HZ);
pe = atomic_read(&mdev->rs_pending_cnt);
mutex_lock(&mdev->data.mutex);
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index b8d2516668aa0..479ee3a1d9018 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -53,7 +53,7 @@
extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.8"
+#define REL_VERSION "8.3.8.1"
#define API_VERSION 88
#define PRO_VERSION_MIN 86
#define PRO_VERSION_MAX 94
diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h
index ce77a746fc9d5..5f042810a56c3 100644
--- a/include/linux/drbd_nl.h
+++ b/include/linux/drbd_nl.h
@@ -78,10 +78,11 @@ NL_PACKET(syncer_conf, 8,
NL_INTEGER( 30, T_MAY_IGNORE, rate)
NL_INTEGER( 31, T_MAY_IGNORE, after)
NL_INTEGER( 32, T_MAY_IGNORE, al_extents)
- NL_INTEGER( 71, T_MAY_IGNORE, dp_volume)
- NL_INTEGER( 72, T_MAY_IGNORE, dp_interval)
- NL_INTEGER( 73, T_MAY_IGNORE, throttle_th)
- NL_INTEGER( 74, T_MAY_IGNORE, hold_off_th)
+/* NL_INTEGER( 71, T_MAY_IGNORE, dp_volume)
+ * NL_INTEGER( 72, T_MAY_IGNORE, dp_interval)
+ * NL_INTEGER( 73, T_MAY_IGNORE, throttle_th)
+ * NL_INTEGER( 74, T_MAY_IGNORE, hold_off_th)
+ * feature will be reimplemented differently with 8.3.9 */
NL_STRING( 52, T_MAY_IGNORE, verify_alg, SHARED_SECRET_MAX)
NL_STRING( 51, T_MAY_IGNORE, cpu_mask, 32)
NL_STRING( 64, T_MAY_IGNORE, csums_alg, SHARED_SECRET_MAX)
--
GitLab
From 6bf05d03ea8d00bb53e0642f94a5a6815be2edb6 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Wed, 4 Aug 2010 13:34:31 +0200
Subject: [PATCH 403/863] writeback: fix bad _bh spinlock nesting
Fix a bug where a lock is _bh nested within another _bh lock,
but forgets to use the _bh variant for unlock.
Further more, it's not necessary to test _bh locks, the inner lock
can just use spin_lock(). So fix up the bug by making that change.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
mm/backing-dev.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 0b8ee66993dda..08d357522e784 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -415,7 +415,8 @@ static int bdi_forker_thread(void *ptr)
break;
}
- spin_lock_bh(&bdi->wb_lock);
+ spin_lock(&bdi->wb_lock);
+
/*
* If there is no work to do and the bdi thread was
* inactive long enough - kill it. The wb_lock is taken
@@ -432,7 +433,7 @@ static int bdi_forker_thread(void *ptr)
action = KILL_THREAD;
break;
}
- spin_unlock_bh(&bdi->wb_lock);
+ spin_unlock(&bdi->wb_lock);
}
spin_unlock_bh(&bdi_lock);
--
GitLab
From 387ac089361fbe5ef287e6950c5c40f6b18e5c55 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Thu, 5 Aug 2010 08:34:13 +0200
Subject: [PATCH 404/863] block: fix missing export of blk_types.h
Stephen reports:
After merging the block tree, today's linux-next build (x86_64
allmodconfig) failed like this:
usr/include/linux/fs.h:11: included file 'linux/blk_types.h' is not exported
Caused by commit 9d3dbbcd9a84518ff5e32ffe671d06a48cf84fd9 ("bio, fs:
separate out bio_types.h and define READ/WRITE constants in terms of
BIO_RW_* flags").
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/Kbuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 2fc8e14cc24a8..671715b869fc6 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -39,6 +39,7 @@ header-y += ax25.h
header-y += b1lli.h
header-y += baycom.h
header-y += bfs_fs.h
+header-y += blk_types.h
header-y += blkpg.h
header-y += bpqether.h
header-y += bsg.h
--
GitLab
From 93fb72e443b9fcbef598faa05478883952edca77 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Wed, 23 Jun 2010 15:46:55 +0000
Subject: [PATCH 405/863] RDMA/cxgb4: Obtain RDMA QID ranges from LLD/FW
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
drivers/infiniband/hw/cxgb4/device.c | 9 +++++++--
drivers/infiniband/hw/cxgb4/resource.c | 7 ++++---
drivers/infiniband/hw/cxgb4/t4.h | 2 --
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index d870f9c17c1e8..9bbf491d5d9ee 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -250,12 +250,17 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev)
rdev->cqshift = PAGE_SHIFT - ilog2(rdev->lldi.ucq_density);
rdev->cqmask = rdev->lldi.ucq_density - 1;
PDBG("%s dev %s stag start 0x%0x size 0x%0x num stags %d "
- "pbl start 0x%0x size 0x%0x rq start 0x%0x size 0x%0x\n",
+ "pbl start 0x%0x size 0x%0x rq start 0x%0x size 0x%0x "
+ "qp qid start %u size %u cq qid start %u size %u\n",
__func__, pci_name(rdev->lldi.pdev), rdev->lldi.vr->stag.start,
rdev->lldi.vr->stag.size, c4iw_num_stags(rdev),
rdev->lldi.vr->pbl.start,
rdev->lldi.vr->pbl.size, rdev->lldi.vr->rq.start,
- rdev->lldi.vr->rq.size);
+ rdev->lldi.vr->rq.size,
+ rdev->lldi.vr->qp.start,
+ rdev->lldi.vr->qp.size,
+ rdev->lldi.vr->cq.start,
+ rdev->lldi.vr->cq.size);
PDBG("udb len 0x%x udb base %p db_reg %p gts_reg %p qpshift %lu "
"qpmask 0x%x cqshift %lu cqmask 0x%x\n",
(unsigned)pci_resource_len(rdev->lldi.pdev, 2),
diff --git a/drivers/infiniband/hw/cxgb4/resource.c b/drivers/infiniband/hw/cxgb4/resource.c
index fb195d1d90151..83b23dfa250de 100644
--- a/drivers/infiniband/hw/cxgb4/resource.c
+++ b/drivers/infiniband/hw/cxgb4/resource.c
@@ -110,11 +110,12 @@ static int c4iw_init_qid_fifo(struct c4iw_rdev *rdev)
spin_lock_init(&rdev->resource.qid_fifo_lock);
- if (kfifo_alloc(&rdev->resource.qid_fifo, T4_MAX_QIDS * sizeof(u32),
- GFP_KERNEL))
+ if (kfifo_alloc(&rdev->resource.qid_fifo, rdev->lldi.vr->qp.size *
+ sizeof(u32), GFP_KERNEL))
return -ENOMEM;
- for (i = T4_QID_BASE; i < T4_QID_BASE + T4_MAX_QIDS; i++)
+ for (i = rdev->lldi.vr->qp.start;
+ i < rdev->lldi.vr->qp.start + rdev->lldi.vr->qp.size; i++)
if (!(i & rdev->qpmask))
kfifo_in(&rdev->resource.qid_fifo,
(unsigned char *) &i, sizeof(u32));
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index aef55f42bea4e..24f369046ef3c 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -36,8 +36,6 @@
#include "t4_msg.h"
#include "t4fw_ri_api.h"
-#define T4_QID_BASE 1024
-#define T4_MAX_QIDS 256
#define T4_MAX_NUM_QP (1<<16)
#define T4_MAX_NUM_CQ (1<<15)
#define T4_MAX_NUM_PD (1<<15)
--
GitLab
From 147e0b6a639ac581ca3bf627bedc3f4a6d3eca66 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Fri, 6 Aug 2010 18:01:59 -0700
Subject: [PATCH 406/863] md: move revalidate_disk() back outside open_mutex
Commit b821eaa5 "md: remove ->changed and related code" moved
revalidate_disk() under open_mutex, and lockdep noticed.
[ INFO: possible circular locking dependency detected ]
2.6.32-mdadm-locking #1
-------------------------------------------------------
mdadm/3640 is trying to acquire lock:
(&bdev->bd_mutex){+.+.+.}, at: [<ffffffff811acecb>] revalidate_disk+0x5b/0x90
but task is already holding lock:
(&mddev->open_mutex){+.+...}, at: [<ffffffffa055e07a>] do_md_stop+0x4a/0x4d0 [md_mod]
which lock already depends on the new lock.
It is suitable for 2.6.35.x
Cc: <stable@kernel.org>
Reported-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 40b7ca0294ac2..00c3fde39a12c 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4765,7 +4765,7 @@ static int md_set_readonly(mddev_t *mddev, int is_open)
*/
static int do_md_stop(mddev_t * mddev, int mode, int is_open)
{
- int err = 0;
+ int err = 0, revalidate = 0;
struct gendisk *disk = mddev->gendisk;
mdk_rdev_t *rdev;
@@ -4795,7 +4795,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
}
set_capacity(disk, 0);
- revalidate_disk(disk);
+ revalidate = 1;
if (mddev->ro)
mddev->ro = 0;
@@ -4803,6 +4803,8 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
err = 0;
}
mutex_unlock(&mddev->open_mutex);
+ if (revalidate)
+ revalidate_disk(disk);
if (err)
return err;
/*
--
GitLab
From bb4f1e9d0e2ef93de8e36ca0f5f26625fcd70b7d Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Sun, 8 Aug 2010 21:18:03 +1000
Subject: [PATCH 407/863] md: fix another deadlock with removing sysfs
attributes.
Move the deletion of sysfs attributes from reconfig_mutex to
open_mutex didn't really help as a process can try to take
open_mutex while holding reconfig_mutex, so the same deadlock can
happen, just requiring one more process to be involved in the chain.
I looks like I cannot easily use locking to wait for the sysfs
deletion to complete, so don't.
The only things that we cannot do while the deletions are still
pending is other things which can change the sysfs namespace: run,
takeover, stop. Each of these can fail with -EBUSY.
So set a flag while doing a sysfs deletion, and fail run, takeover,
stop if that flag is set.
This is suitable for 2.6.35.x
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 31 +++++++++++++++++--------------
drivers/md/md.h | 4 ++++
2 files changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 00c3fde39a12c..03dcbfbe250fd 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -580,13 +580,17 @@ static void mddev_unlock(mddev_t * mddev)
* an access to the files will try to take reconfig_mutex
* while holding the file unremovable, which leads to
* a deadlock.
- * So hold open_mutex instead - we are allowed to take
- * it while holding reconfig_mutex, and md_run can
- * use it to wait for the remove to complete.
+ * So hold set sysfs_active while the remove in happeing,
+ * and anything else which might set ->to_remove or my
+ * otherwise change the sysfs namespace will fail with
+ * -EBUSY if sysfs_active is still set.
+ * We set sysfs_active under reconfig_mutex and elsewhere
+ * test it under the same mutex to ensure its correct value
+ * is seen.
*/
struct attribute_group *to_remove = mddev->to_remove;
mddev->to_remove = NULL;
- mutex_lock(&mddev->open_mutex);
+ mddev->sysfs_active = 1;
mutex_unlock(&mddev->reconfig_mutex);
if (mddev->kobj.sd) {
@@ -600,7 +604,7 @@ static void mddev_unlock(mddev_t * mddev)
mddev->sysfs_action = NULL;
}
}
- mutex_unlock(&mddev->open_mutex);
+ mddev->sysfs_active = 0;
} else
mutex_unlock(&mddev->reconfig_mutex);
@@ -3008,7 +3012,9 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
* - new personality will access other array.
*/
- if (mddev->sync_thread || mddev->reshape_position != MaxSector)
+ if (mddev->sync_thread ||
+ mddev->reshape_position != MaxSector ||
+ mddev->sysfs_active)
return -EBUSY;
if (!mddev->pers->quiesce) {
@@ -4393,13 +4399,9 @@ int md_run(mddev_t *mddev)
if (mddev->pers)
return -EBUSY;
-
- /* These two calls synchronise us with the
- * sysfs_remove_group calls in mddev_unlock,
- * so they must have completed.
- */
- mutex_lock(&mddev->open_mutex);
- mutex_unlock(&mddev->open_mutex);
+ /* Cannot run until previous stop completes properly */
+ if (mddev->sysfs_active)
+ return -EBUSY;
/*
* Analyze all RAID superblock(s)
@@ -4770,7 +4772,8 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
mdk_rdev_t *rdev;
mutex_lock(&mddev->open_mutex);
- if (atomic_read(&mddev->openers) > is_open) {
+ if (atomic_read(&mddev->openers) > is_open ||
+ mddev->sysfs_active) {
printk("md: %s still in use.\n",mdname(mddev));
err = -EBUSY;
} else if (mddev->pers) {
diff --git a/drivers/md/md.h b/drivers/md/md.h
index cccbadb31bae7..6f797eceae317 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -145,6 +145,10 @@ struct mddev_s
int suspended;
atomic_t active_io;
int ro;
+ int sysfs_active; /* set when sysfs deletes
+ * are happening, so run/
+ * takeover/stop are not safe
+ */
struct gendisk *gendisk;
--
GitLab
From 6e17b0276452912cb13445e5ea552b599984675f Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Sat, 7 Aug 2010 21:41:19 +1000
Subject: [PATCH 408/863] md: clean up do_md_stop
There is only one error exit from do_md_stop, so make that more
explicit and discard the 'err' variable.
Also drop the 'revalidate' variable by moving the unlock calls around.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/md.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 03dcbfbe250fd..d44efb267a69f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4767,7 +4767,6 @@ static int md_set_readonly(mddev_t *mddev, int is_open)
*/
static int do_md_stop(mddev_t * mddev, int mode, int is_open)
{
- int err = 0, revalidate = 0;
struct gendisk *disk = mddev->gendisk;
mdk_rdev_t *rdev;
@@ -4775,9 +4774,11 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
if (atomic_read(&mddev->openers) > is_open ||
mddev->sysfs_active) {
printk("md: %s still in use.\n",mdname(mddev));
- err = -EBUSY;
- } else if (mddev->pers) {
+ mutex_unlock(&mddev->open_mutex);
+ return -EBUSY;
+ }
+ if (mddev->pers) {
if (mddev->ro)
set_disk_ro(disk, 0);
@@ -4798,23 +4799,17 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
}
set_capacity(disk, 0);
- revalidate = 1;
+ mutex_unlock(&mddev->open_mutex);
+ revalidate_disk(disk);
if (mddev->ro)
mddev->ro = 0;
-
- err = 0;
- }
- mutex_unlock(&mddev->open_mutex);
- if (revalidate)
- revalidate_disk(disk);
- if (err)
- return err;
+ } else
+ mutex_unlock(&mddev->open_mutex);
/*
* Free resources if final stop
*/
if (mode == 0) {
-
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
bitmap_destroy(mddev);
@@ -4831,13 +4826,11 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
if (mddev->hold_active == UNTIL_STOP)
mddev->hold_active = 0;
-
}
- err = 0;
blk_integrity_unregister(disk);
md_new_event(mddev);
sysfs_notify_dirent_safe(mddev->sysfs_state);
- return err;
+ return 0;
}
#ifndef MODULE
--
GitLab
From 78ef7fab0eb0a5b159842bac89aed74bb0aa7bfe Mon Sep 17 00:00:00 2001
From: Barry Song <21cnbao@gmail.com>
Date: Fri, 15 Jan 2010 15:50:14 +0800
Subject: [PATCH 409/863] mtd-physmap: add support users can assign the probe
type in board files
There are three reasons to add this support:
1. users probably know the interface type of their flashs, then probe
can be faster if they give the right type in platform data since wrong
types will not be detected.
2. sometimes, detecting can cause destory to system. For example, for
kernel XIP, detecting can cause NOR enter a mode instructions can not
be fetched right, which will make kernel crash.
3. For a new probe which is not listed in the rom_probe_types, if users
assign it in board files, physmap can still probe it.
Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/maps/physmap.c | 8 ++++++--
include/linux/mtd/physmap.h | 1 +
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 829aa4bee54f6..4c18b98a31108 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -136,8 +136,12 @@ static int physmap_flash_probe(struct platform_device *dev)
simple_map_init(&info->map[i]);
probe_type = rom_probe_types;
- for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
- info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
+ if (physmap_data->probe_type == NULL) {
+ for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+ info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
+ } else
+ info->mtd[i] = do_map_probe(physmap_data->probe_type, &info->map[i]);
+
if (info->mtd[i] == NULL) {
dev_err(&dev->dev, "map_probe failed\n");
err = -ENXIO;
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index 76f7cabf07d32..bcfd9f7774542 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -25,6 +25,7 @@ struct physmap_flash_data {
void (*set_vpp)(struct map_info *, int);
unsigned int nr_parts;
unsigned int pfow_base;
+ char *probe_type;
struct mtd_partition *parts;
};
--
GitLab
From 6088c0587706b2cf21ce50c11576718bff5fae0c Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Sun, 8 Aug 2010 14:15:22 +0100
Subject: [PATCH 410/863] jffs2: Update copyright notices
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
fs/jffs2/background.c | 1 +
fs/jffs2/build.c | 1 +
fs/jffs2/compr.c | 5 +++--
fs/jffs2/compr.h | 1 +
fs/jffs2/compr_lzo.c | 1 +
fs/jffs2/compr_rtime.c | 1 +
fs/jffs2/compr_rubin.c | 1 +
fs/jffs2/compr_zlib.c | 1 +
fs/jffs2/debug.c | 1 +
fs/jffs2/debug.h | 1 +
fs/jffs2/dir.c | 1 +
fs/jffs2/erase.c | 1 +
fs/jffs2/file.c | 1 +
fs/jffs2/fs.c | 1 +
fs/jffs2/gc.c | 1 +
fs/jffs2/ioctl.c | 1 +
fs/jffs2/jffs2_fs_i.h | 1 +
fs/jffs2/jffs2_fs_sb.h | 1 +
include/linux/jffs2.h | 3 ++-
19 files changed, 22 insertions(+), 3 deletions(-)
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index 55f1dde2fa8b0..404111b016c93 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/build.c b/fs/jffs2/build.c
index c5e1450d79f9d..a906f538d11ce 100644
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index f0294410868d4..617a1e5694c1b 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -2,11 +2,12 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
- * Created by Arjan van de Ven <arjanv@redhat.com>
- *
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
* Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
* University of Szeged, Hungary
*
+ * Created by Arjan van de Ven <arjan@infradead.org>
+ *
* For licensing information, see the file 'LICENCE' in this directory.
*
*/
diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
index 7d1d72faa7745..e471a9106fd94 100644
--- a/fs/jffs2/compr.h
+++ b/fs/jffs2/compr.h
@@ -3,6 +3,7 @@
*
* Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
* University of Szeged, Hungary
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* For licensing information, see the file 'LICENCE' in this directory.
*
diff --git a/fs/jffs2/compr_lzo.c b/fs/jffs2/compr_lzo.c
index cd02acafde8a3..ed25ae7c98eba 100644
--- a/fs/jffs2/compr_lzo.c
+++ b/fs/jffs2/compr_lzo.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2007 Nokia Corporation. All rights reserved.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by Richard Purdie <rpurdie@openedhand.com>
*
diff --git a/fs/jffs2/compr_rtime.c b/fs/jffs2/compr_rtime.c
index 546d1538d0762..9696ad9ef5f77 100644
--- a/fs/jffs2/compr_rtime.c
+++ b/fs/jffs2/compr_rtime.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by Arjan van de Ven <arjanv@redhat.com>
*
diff --git a/fs/jffs2/compr_rubin.c b/fs/jffs2/compr_rubin.c
index 170d289ac785f..a12b4f763373f 100644
--- a/fs/jffs2/compr_rubin.c
+++ b/fs/jffs2/compr_rubin.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by Arjan van de Ven <arjanv@redhat.com>
*
diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c
index b46661a427586..97fc45de6f81e 100644
--- a/fs/jffs2/compr_zlib.c
+++ b/fs/jffs2/compr_zlib.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/debug.c b/fs/jffs2/debug.c
index ec3538413926f..e0b76c87a91af 100644
--- a/fs/jffs2/debug.c
+++ b/fs/jffs2/debug.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/debug.h b/fs/jffs2/debug.h
index a113ecc3bafee..c4f8eef5ca68b 100644
--- a/fs/jffs2/debug.h
+++ b/fs/jffs2/debug.h
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 166062a682304..1aaf98df49d09 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index 6286ad9b00f75..abac961f617b8 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index e7291c161a198..52749127aa6cc 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 26037e2d6154b..29d0970f9da3a 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index f5e96bd656e85..846a79452497b 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/ioctl.c b/fs/jffs2/ioctl.c
index 9d41f43e47bb2..859a598af0209 100644
--- a/fs/jffs2/ioctl.c
+++ b/fs/jffs2/ioctl.c
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/jffs2_fs_i.h b/fs/jffs2/jffs2_fs_i.h
index c6923da982633..2e4a86763c07c 100644
--- a/fs/jffs2/jffs2_fs_i.h
+++ b/fs/jffs2/jffs2_fs_i.h
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index 85ef6dbb1be7a..6784bc89add1d 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -2,6 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
index 0874ab59ffefb..b9898894ec8da 100644
--- a/include/linux/jffs2.h
+++ b/include/linux/jffs2.h
@@ -1,7 +1,8 @@
/*
* JFFS2 -- Journalling Flash File System, Version 2.
*
- * Copyright (C) 2001-2003 Red Hat, Inc.
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
*
* Created by David Woodhouse <dwmw2@infradead.org>
*
--
GitLab
From ffc18879903e55487bc5ac3c774b99a07de06029 Mon Sep 17 00:00:00 2001
From: Bill Pemberton <wfp5p@virginia.edu>
Date: Tue, 3 Aug 2010 15:19:30 -0400
Subject: [PATCH 411/863] omfs: fix uninitialized variable warning
quiet the warning:
fs/omfs/file.c: In function 'omfs_get_block':
fs/omfs/file.c:225: warning: 'new_block' may be used uninitialized in
this function
new_block is used properly by the call to omfs_grow_extent()
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
---
fs/omfs/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 76bc21b91a8a4..d821d468e5a25 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -222,7 +222,7 @@ static int omfs_get_block(struct inode *inode, sector_t block,
struct buffer_head *bh;
sector_t next, offset;
int ret;
- u64 new_block;
+ u64 uninitialized_var(new_block);
u32 max_extents;
int extent_count;
struct omfs_extent *oe;
--
GitLab
From 3383977fadc4027f20907f6208a9033cd043adab Mon Sep 17 00:00:00 2001
From: ike Snitzer <snitzer@redhat.com>
Date: Sun, 8 Aug 2010 12:11:33 -0400
Subject: [PATCH 412/863] block: update request stacking methods to support
discards
Propagate REQ_DISCARD in cmd_flags when cloning a discard request.
Skip blk_rq_check_limits's existing checks for discard requests because
discard limits will have already been checked in blkdev_issue_discard.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-core.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/block/blk-core.c b/block/blk-core.c
index 5ab3ac22930ce..7da630e25ae7a 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1644,6 +1644,9 @@ EXPORT_SYMBOL(submit_bio);
*/
int blk_rq_check_limits(struct request_queue *q, struct request *rq)
{
+ if (rq->cmd_flags & REQ_DISCARD)
+ return 0;
+
if (blk_rq_sectors(rq) > queue_max_sectors(q) ||
blk_rq_bytes(rq) > queue_max_hw_sectors(q) << 9) {
printk(KERN_ERR "%s: over max size limit.\n", __func__);
@@ -2492,6 +2495,8 @@ static void __blk_rq_prep_clone(struct request *dst, struct request *src)
{
dst->cpu = src->cpu;
dst->cmd_flags = (rq_data_dir(src) | REQ_NOMERGE);
+ if (src->cmd_flags & REQ_DISCARD)
+ dst->cmd_flags |= REQ_DISCARD;
dst->cmd_type = src->cmd_type;
dst->__sector = blk_rq_pos(src);
dst->__data_len = blk_rq_bytes(src);
--
GitLab
From 18edc8eaa68070771bdb2098260e44efe74de722 Mon Sep 17 00:00:00 2001
From: Dmitry Monakhov <dmonakhov@openvz.org>
Date: Fri, 6 Aug 2010 13:23:25 +0200
Subject: [PATCH 413/863] blkdev: fix blkdev_issue_zeroout return value
- If function called without barrier option retvalue is incorrect
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
block/blk-lib.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 5d793e143f3c7..c1fc55a83ba14 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -145,7 +145,7 @@ static void bio_batch_end_io(struct bio *bio, int err)
int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned long flags)
{
- int ret = 0;
+ int ret;
struct bio *bio;
struct bio_batch bb;
unsigned int sz, issued = 0;
@@ -163,11 +163,14 @@ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
return ret;
}
submit:
+ ret = 0;
while (nr_sects != 0) {
bio = bio_alloc(gfp_mask,
min(nr_sects, (sector_t)BIO_MAX_PAGES));
- if (!bio)
+ if (!bio) {
+ ret = -ENOMEM;
break;
+ }
bio->bi_sector = sector;
bio->bi_bdev = bdev;
@@ -186,6 +189,7 @@ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
if (ret < (sz << 9))
break;
}
+ ret = 0;
issued++;
submit_bio(WRITE, bio);
}
--
GitLab
From 9a3725631331f279fa44b6522874ce8818bcc455 Mon Sep 17 00:00:00 2001
From: Wim Van Sebroeck <wim@iguana.be>
Date: Fri, 21 May 2010 08:11:42 +0000
Subject: [PATCH 414/863] watchdog: s3c2410_wdt - Fix removing of platform
device
When removing the watchdog platform device, we need to
disable the access to userspace first. It makes no sense
to remove the drivers clock, irq's, ... and then disable
userspace access.
the order of removal has also been changed so that it
is the reverse of probing (this way the clock is also
disabled sooner).
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/s3c2410_wdt.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 300932580ded9..ae53662c29bce 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -532,21 +532,22 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
static int __devexit s3c2410wdt_remove(struct platform_device *dev)
{
- s3c2410wdt_cpufreq_deregister();
-
- release_resource(wdt_mem);
- kfree(wdt_mem);
- wdt_mem = NULL;
+ misc_deregister(&s3c2410wdt_miscdev);
- free_irq(wdt_irq->start, dev);
- wdt_irq = NULL;
+ s3c2410wdt_cpufreq_deregister();
clk_disable(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
+ free_irq(wdt_irq->start, dev);
+ wdt_irq = NULL;
+
iounmap(wdt_base);
- misc_deregister(&s3c2410wdt_miscdev);
+
+ release_resource(wdt_mem);
+ kfree(wdt_mem);
+ wdt_mem = NULL;
return 0;
}
--
GitLab
From 9f2cc6f759ca0b072107c171a3b5cd79c7ea5de3 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Fri, 21 May 2010 18:38:52 -0500
Subject: [PATCH 415/863] watchdog: wdt_pci.c: move ids to pci_ids.h
Move the VENDOR/DEVICE ids to pci_ids.h.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/wdt_pci.c | 15 +--------------
include/linux/pci_ids.h | 3 +++
2 files changed, 4 insertions(+), 14 deletions(-)
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index 7b22e3cdbc816..6130c88fa5aca 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -60,19 +60,6 @@
#define PFX "wdt_pci: "
-/*
- * Until Access I/O gets their application for a PCI vendor ID approved,
- * I don't think that it's appropriate to move these constants into the
- * regular pci_ids.h file. -- JPN 2000/01/18
- */
-
-#ifndef PCI_VENDOR_ID_ACCESSIO
-#define PCI_VENDOR_ID_ACCESSIO 0x494f
-#endif
-#ifndef PCI_DEVICE_ID_WDG_CSM
-#define PCI_DEVICE_ID_WDG_CSM 0x22c0
-#endif
-
/* We can only use 1 card due to the /dev/watchdog restriction */
static int dev_count;
@@ -743,7 +730,7 @@ static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
static struct pci_device_id wdtpci_pci_tbl[] = {
{
.vendor = PCI_VENDOR_ID_ACCESSIO,
- .device = PCI_DEVICE_ID_WDG_CSM,
+ .device = PCI_DEVICE_ID_ACCESSIO_WDG_CSM,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c81eec4d3c351..f6a3b2d36cadd 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2372,6 +2372,9 @@
#define PCI_VENDOR_ID_AKS 0x416c
#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
+#define PCI_VENDOR_ID_ACCESSIO 0x494f
+#define PCI_DEVICE_ID_ACCESSIO_WDG_CSM 0x22c0
+
#define PCI_VENDOR_ID_S3 0x5333
#define PCI_DEVICE_ID_S3_TRIO 0x8811
#define PCI_DEVICE_ID_S3_868 0x8880
--
GitLab
From 4c4b638e3718344e4caeb157cfbfde1b6a7b1562 Mon Sep 17 00:00:00 2001
From: Wim Van Sebroeck <wim@iguana.be>
Date: Thu, 10 Jun 2010 06:46:56 +0000
Subject: [PATCH 416/863] watchdog: sch311x_wdt.c: set parent before
registeriing the misc device in probe() function
Set the paranet of the misc_device before we register the misc_device.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
---
drivers/watchdog/sch311x_wdt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index 9c40f48804f5d..0461858e07d00 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -425,6 +425,8 @@ static int __devinit sch311x_wdt_probe(struct platform_device *pdev)
val = therm_trip ? 0x06 : 0x04;
outb(val, sch311x_wdt_data.runtime_reg + RESGEN);
+ sch311x_wdt_miscdev.parent = dev;
+
err = misc_register(&sch311x_wdt_miscdev);
if (err != 0) {
dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n",
@@ -432,8 +434,6 @@ static int __devinit sch311x_wdt_probe(struct platform_device *pdev)
goto exit_release_region3;
}
- sch311x_wdt_miscdev.parent = dev;
-
dev_info(dev,
"SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n",
timeout, nowayout);
--
GitLab
From 96cb4eb019ce3185ec0d946a74b5a2202f5067c9 Mon Sep 17 00:00:00 2001
From: Giel van Schijndel <me@mortis.eu>
Date: Sun, 1 Aug 2010 15:30:55 +0200
Subject: [PATCH 417/863] watchdog: f71808e_wdt: new watchdog driver for Fintek
F71808E and F71882FG
Add a new watchdog driver for the Fintek F71808E and F71882FG Super I/O
controllers.
Signed-off-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/Kconfig | 11 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/f71808e_wdt.c | 768 +++++++++++++++++++++++++++++++++
3 files changed, 780 insertions(+)
create mode 100644 drivers/watchdog/f71808e_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b04b184689326..910e09f49b368 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -401,6 +401,17 @@ config ALIM7101_WDT
Most people will say N.
+config F71808E_WDT
+ tristate "Fintek F71808E and F71882FG Watchdog"
+ depends on X86 && EXPERIMENTAL
+ help
+ This is the driver for the hardware watchdog on the Fintek
+ F71808E and F71882FG Super I/O controllers.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called f71808e_wdt.
+
+
config GEODE_WDT
tristate "AMD Geode CS5535/CS5536 Watchdog"
depends on CS5535_MFGPT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index e30289a5e3677..0010ae55556a4 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o
obj-$(CONFIG_GEODE_WDT) += geodewdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_SBC_FITPC2_WATCHDOG) += sbc_fitpc2_wdt.o
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
new file mode 100644
index 0000000000000..7e5c266cda480
--- /dev/null
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -0,0 +1,768 @@
+/***************************************************************************
+ * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> *
+ * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> *
+ * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+#define DRVNAME "f71808e_wdt"
+
+#define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */
+#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
+#define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
+#define SIO_REG_DEVREV 0x22 /* Device revision */
+#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
+
+#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
+#define SIO_F71808_ID 0x0901 /* Chipset ID */
+#define SIO_F71858_ID 0x0507 /* Chipset ID */
+#define SIO_F71862_ID 0x0601 /* Chipset ID */
+#define SIO_F71882_ID 0x0541 /* Chipset ID */
+#define SIO_F71889_ID 0x0723 /* Chipset ID */
+
+#define F71882FG_REG_START 0x01
+
+#define F71808FG_REG_WDO_CONF 0xf0
+#define F71808FG_REG_WDT_CONF 0xf5
+#define F71808FG_REG_WD_TIME 0xf6
+
+#define F71808FG_FLAG_WDOUT_EN 7
+
+#define F71808FG_FLAG_WDTMOUT_STS 5
+#define F71808FG_FLAG_WD_EN 5
+#define F71808FG_FLAG_WD_PULSE 4
+#define F71808FG_FLAG_WD_UNIT 3
+
+/* Default values */
+#define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */
+#define WATCHDOG_MAX_TIMEOUT (60 * 255)
+#define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for
+ watchdog signal */
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+static const int max_timeout = WATCHDOG_MAX_TIMEOUT;
+static int timeout = 60; /* default timeout in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in seconds. 1<= timeout <="
+ __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default="
+ __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
+module_param(pulse_width, uint, 0);
+MODULE_PARM_DESC(pulse_width,
+ "Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms"
+ " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+static unsigned int start_withtimeout;
+module_param(start_withtimeout, uint, 0);
+MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
+ " given initial timeout. Zero (default) disables this feature.");
+
+enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg };
+
+static const char *f71808e_names[] = {
+ "f71808fg",
+ "f71858fg",
+ "f71862fg",
+ "f71882fg",
+ "f71889fg",
+};
+
+/* Super-I/O Function prototypes */
+static inline int superio_inb(int base, int reg);
+static inline int superio_inw(int base, int reg);
+static inline void superio_outb(int base, int reg, u8 val);
+static inline void superio_set_bit(int base, int reg, int bit);
+static inline void superio_clear_bit(int base, int reg, int bit);
+static inline int superio_enter(int base);
+static inline void superio_select(int base, int ld);
+static inline void superio_exit(int base);
+
+struct watchdog_data {
+ unsigned short sioaddr;
+ enum chips type;
+ unsigned long opened;
+ struct mutex lock;
+ char expect_close;
+ struct watchdog_info ident;
+
+ unsigned short timeout;
+ u8 timer_val; /* content for the wd_time register */
+ char minutes_mode;
+ u8 pulse_val; /* pulse width flag */
+ char pulse_mode; /* enable pulse output mode? */
+ char caused_reboot; /* last reboot was by the watchdog */
+};
+
+static struct watchdog_data watchdog = {
+ .lock = __MUTEX_INITIALIZER(watchdog.lock),
+};
+
+/* Super I/O functions */
+static inline int superio_inb(int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+ int val;
+ val = superio_inb(base, reg) << 8;
+ val |= superio_inb(base, reg + 1);
+ return val;
+}
+
+static inline void superio_outb(int base, int reg, u8 val)
+{
+ outb(reg, base);
+ outb(val, base + 1);
+}
+
+static inline void superio_set_bit(int base, int reg, int bit)
+{
+ unsigned long val = superio_inb(base, reg);
+ __set_bit(bit, &val);
+ superio_outb(base, reg, val);
+}
+
+static inline void superio_clear_bit(int base, int reg, int bit)
+{
+ unsigned long val = superio_inb(base, reg);
+ __clear_bit(bit, &val);
+ superio_outb(base, reg, val);
+}
+
+static inline int superio_enter(int base)
+{
+ /* Don't step on other drivers' I/O space by accident */
+ if (!request_muxed_region(base, 2, DRVNAME)) {
+ printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
+ (int)base);
+ return -EBUSY;
+ }
+
+ /* according to the datasheet the key must be send twice! */
+ outb(SIO_UNLOCK_KEY, base);
+ outb(SIO_UNLOCK_KEY, base);
+
+ return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+ outb(SIO_REG_LDSEL, base);
+ outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+ outb(SIO_LOCK_KEY, base);
+ release_region(base, 2);
+}
+
+static int watchdog_set_timeout(int timeout)
+{
+ if (timeout <= 0
+ || timeout > max_timeout) {
+ printk(KERN_ERR DRVNAME ": watchdog timeout out of range\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&watchdog.lock);
+
+ watchdog.timeout = timeout;
+ if (timeout > 0xff) {
+ watchdog.timer_val = DIV_ROUND_UP(timeout, 60);
+ watchdog.minutes_mode = true;
+ } else {
+ watchdog.timer_val = timeout;
+ watchdog.minutes_mode = false;
+ }
+
+ mutex_unlock(&watchdog.lock);
+
+ return 0;
+}
+
+static int watchdog_set_pulse_width(unsigned int pw)
+{
+ int err = 0;
+
+ mutex_lock(&watchdog.lock);
+
+ if (pw <= 1) {
+ watchdog.pulse_val = 0;
+ } else if (pw <= 25) {
+ watchdog.pulse_val = 1;
+ } else if (pw <= 125) {
+ watchdog.pulse_val = 2;
+ } else if (pw <= 5000) {
+ watchdog.pulse_val = 3;
+ } else {
+ printk(KERN_ERR DRVNAME ": pulse width out of range\n");
+ err = -EINVAL;
+ goto exit_unlock;
+ }
+
+ watchdog.pulse_mode = pw;
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+ return err;
+}
+
+static int watchdog_keepalive(void)
+{
+ int err = 0;
+
+ mutex_lock(&watchdog.lock);
+ err = superio_enter(watchdog.sioaddr);
+ if (err)
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ if (watchdog.minutes_mode)
+ /* select minutes for timer units */
+ superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_UNIT);
+ else
+ /* select seconds for timer units */
+ superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_UNIT);
+
+ /* Set timer value */
+ superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME,
+ watchdog.timer_val);
+
+ superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+ return err;
+}
+
+static int watchdog_start(void)
+{
+ /* Make sure we don't die as soon as the watchdog is enabled below */
+ int err = watchdog_keepalive();
+ if (err)
+ return err;
+
+ mutex_lock(&watchdog.lock);
+ err = superio_enter(watchdog.sioaddr);
+ if (err)
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ /* Watchdog pin configuration */
+ switch (watchdog.type) {
+ case f71808fg:
+ /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
+ superio_clear_bit(watchdog.sioaddr, 0x2a, 3);
+ superio_clear_bit(watchdog.sioaddr, 0x2b, 3);
+ break;
+
+ case f71882fg:
+ /* Set pin 56 to WDTRST# */
+ superio_set_bit(watchdog.sioaddr, 0x29, 1);
+ break;
+
+ default:
+ /*
+ * 'default' label to shut up the compiler and catch
+ * programmer errors
+ */
+ err = -ENODEV;
+ goto exit_superio;
+ }
+
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+ superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0);
+ superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF,
+ F71808FG_FLAG_WDOUT_EN);
+
+ superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_EN);
+
+ if (watchdog.pulse_mode) {
+ /* Select "pulse" output mode with given duration */
+ u8 wdt_conf = superio_inb(watchdog.sioaddr,
+ F71808FG_REG_WDT_CONF);
+
+ /* Set WD_PSWIDTH bits (1:0) */
+ wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03);
+ /* Set WD_PULSE to "pulse" mode */
+ wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE);
+
+ superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ wdt_conf);
+ } else {
+ /* Select "level" output mode */
+ superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_PULSE);
+ }
+
+exit_superio:
+ superio_exit(watchdog.sioaddr);
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+
+ return err;
+}
+
+static int watchdog_stop(void)
+{
+ int err = 0;
+
+ mutex_lock(&watchdog.lock);
+ err = superio_enter(watchdog.sioaddr);
+ if (err)
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_EN);
+
+ superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+
+ return err;
+}
+
+static int watchdog_get_status(void)
+{
+ int status = 0;
+
+ mutex_lock(&watchdog.lock);
+ status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0;
+ mutex_unlock(&watchdog.lock);
+
+ return status;
+}
+
+static bool watchdog_is_running(void)
+{
+ /*
+ * if we fail to determine the watchdog's status assume it to be
+ * running to be on the safe side
+ */
+ bool is_running = true;
+
+ mutex_lock(&watchdog.lock);
+ if (superio_enter(watchdog.sioaddr))
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0))
+ && (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF)
+ & F71808FG_FLAG_WD_EN);
+
+ superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+ return is_running;
+}
+
+/* /dev/watchdog api */
+
+static int watchdog_open(struct inode *inode, struct file *file)
+{
+ int err;
+
+ /* If the watchdog is alive we don't need to start it again */
+ if (test_and_set_bit(0, &watchdog.opened))
+ return -EBUSY;
+
+ err = watchdog_start();
+ if (err) {
+ clear_bit(0, &watchdog.opened);
+ return err;
+ }
+
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ watchdog.expect_close = 0;
+ return nonseekable_open(inode, file);
+}
+
+static int watchdog_release(struct inode *inode, struct file *file)
+{
+ clear_bit(0, &watchdog.opened);
+
+ if (!watchdog.expect_close) {
+ watchdog_keepalive();
+ printk(KERN_CRIT DRVNAME
+ ": Unexpected close, not stopping watchdog!\n");
+ } else if (!nowayout) {
+ watchdog_stop();
+ }
+ return 0;
+}
+
+/*
+ * watchdog_write:
+ * @file: file handle to the watchdog
+ * @buf: buffer to write
+ * @count: count of bytes
+ * @ppos: pointer to the position to write. No seeks allowed
+ *
+ * A write to a watchdog device is defined as a keepalive signal. Any
+ * write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t watchdog_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ if (count) {
+ if (!nowayout) {
+ size_t i;
+
+ /* In case it was set long ago */
+ bool expect_close = false;
+
+ for (i = 0; i != count; i++) {
+ char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ expect_close = (c == 'V');
+ }
+
+ /* Properly order writes across fork()ed processes */
+ mutex_lock(&watchdog.lock);
+ watchdog.expect_close = expect_close;
+ mutex_unlock(&watchdog.lock);
+ }
+
+ /* someone wrote to us, we should restart timer */
+ watchdog_keepalive();
+ }
+ return count;
+}
+
+/*
+ * watchdog_ioctl:
+ * @inode: inode of the device
+ * @file: file handle to the device
+ * @cmd: watchdog command
+ * @arg: argument pointer
+ *
+ * The watchdog API defines a common set of functions for all watchdogs
+ * according to their available features.
+ */
+static long watchdog_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int status;
+ int new_options;
+ int new_timeout;
+ union {
+ struct watchdog_info __user *ident;
+ int __user *i;
+ } uarg;
+
+ uarg.i = (int __user *)arg;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(uarg.ident, &watchdog.ident,
+ sizeof(watchdog.ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ status = watchdog_get_status();
+ if (status < 0)
+ return status;
+ return put_user(status, uarg.i);
+
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, uarg.i);
+
+ case WDIOC_SETOPTIONS:
+ if (get_user(new_options, uarg.i))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD)
+ watchdog_stop();
+
+ if (new_options & WDIOS_ENABLECARD)
+ return watchdog_start();
+
+
+ case WDIOC_KEEPALIVE:
+ watchdog_keepalive();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_timeout, uarg.i))
+ return -EFAULT;
+
+ if (watchdog_set_timeout(new_timeout))
+ return -EINVAL;
+
+ watchdog_keepalive();
+ /* Fall */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(watchdog.timeout, uarg.i);
+
+ default:
+ return -ENOTTY;
+
+ }
+}
+
+static int watchdog_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT)
+ watchdog_stop();
+ return NOTIFY_DONE;
+}
+
+static const struct file_operations watchdog_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = watchdog_open,
+ .release = watchdog_release,
+ .write = watchdog_write,
+ .unlocked_ioctl = watchdog_ioctl,
+};
+
+static struct miscdevice watchdog_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &watchdog_fops,
+};
+
+static struct notifier_block watchdog_notifier = {
+ .notifier_call = watchdog_notify_sys,
+};
+
+static int __init watchdog_init(int sioaddr)
+{
+ int wdt_conf, err = 0;
+
+ /* No need to lock watchdog.lock here because no entry points
+ * into the module have been registered yet.
+ */
+ watchdog.sioaddr = sioaddr;
+ watchdog.ident.options = WDIOC_SETTIMEOUT
+ | WDIOF_MAGICCLOSE
+ | WDIOF_KEEPALIVEPING;
+
+ snprintf(watchdog.ident.identity,
+ sizeof(watchdog.ident.identity), "%s watchdog",
+ f71808e_names[watchdog.type]);
+
+ err = superio_enter(sioaddr);
+ if (err)
+ return err;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
+ watchdog.caused_reboot = wdt_conf & F71808FG_FLAG_WDTMOUT_STS;
+
+ superio_exit(sioaddr);
+
+ err = watchdog_set_timeout(timeout);
+ if (err)
+ return err;
+ err = watchdog_set_pulse_width(pulse_width);
+ if (err)
+ return err;
+
+ err = register_reboot_notifier(&watchdog_notifier);
+ if (err)
+ return err;
+
+ err = misc_register(&watchdog_miscdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME
+ ": cannot register miscdev on minor=%d\n",
+ watchdog_miscdev.minor);
+ goto exit_reboot;
+ }
+
+ if (start_withtimeout) {
+ if (start_withtimeout <= 0
+ || start_withtimeout > max_timeout) {
+ printk(KERN_ERR DRVNAME
+ ": starting timeout out of range\n");
+ err = -EINVAL;
+ goto exit_miscdev;
+ }
+
+ err = watchdog_start();
+ if (err) {
+ printk(KERN_ERR DRVNAME
+ ": cannot start watchdog timer\n");
+ goto exit_miscdev;
+ }
+
+ mutex_lock(&watchdog.lock);
+ err = superio_enter(sioaddr);
+ if (err)
+ goto exit_unlock;
+ superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+ if (start_withtimeout > 0xff) {
+ /* select minutes for timer units */
+ superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_UNIT);
+ superio_outb(sioaddr, F71808FG_REG_WD_TIME,
+ DIV_ROUND_UP(start_withtimeout, 60));
+ } else {
+ /* select seconds for timer units */
+ superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_UNIT);
+ superio_outb(sioaddr, F71808FG_REG_WD_TIME,
+ start_withtimeout);
+ }
+
+ superio_exit(sioaddr);
+ mutex_unlock(&watchdog.lock);
+
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ printk(KERN_INFO DRVNAME
+ ": watchdog started with initial timeout of %u sec\n",
+ start_withtimeout);
+ }
+
+ return 0;
+
+exit_unlock:
+ mutex_unlock(&watchdog.lock);
+exit_miscdev:
+ misc_deregister(&watchdog_miscdev);
+exit_reboot:
+ unregister_reboot_notifier(&watchdog_notifier);
+
+ return err;
+}
+
+static int __init f71808e_find(int sioaddr)
+{
+ u16 devid;
+ int err = superio_enter(sioaddr);
+ if (err)
+ return err;
+
+ devid = superio_inw(sioaddr, SIO_REG_MANID);
+ if (devid != SIO_FINTEK_ID) {
+ pr_debug(DRVNAME ": Not a Fintek device\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
+ switch (devid) {
+ case SIO_F71808_ID:
+ watchdog.type = f71808fg;
+ break;
+ case SIO_F71882_ID:
+ watchdog.type = f71882fg;
+ break;
+ case SIO_F71862_ID:
+ case SIO_F71889_ID:
+ /* These have a watchdog, though it isn't implemented (yet). */
+ err = -ENOSYS;
+ goto exit;
+ case SIO_F71858_ID:
+ /* Confirmed (by datasheet) not to have a watchdog. */
+ err = -ENODEV;
+ goto exit;
+ default:
+ printk(KERN_INFO DRVNAME ": Unrecognized Fintek device: %04x\n",
+ (unsigned int)devid);
+ err = -ENODEV;
+ goto exit;
+ }
+
+ printk(KERN_INFO DRVNAME ": Found %s watchdog chip, revision %d\n",
+ f71808e_names[watchdog.type],
+ (int)superio_inb(sioaddr, SIO_REG_DEVREV));
+exit:
+ superio_exit(sioaddr);
+ return err;
+}
+
+static int __init f71808e_init(void)
+{
+ static const unsigned short addrs[] = { 0x2e, 0x4e };
+ int err = -ENODEV;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(addrs); i++) {
+ err = f71808e_find(addrs[i]);
+ if (err == 0)
+ break;
+ }
+ if (i == ARRAY_SIZE(addrs))
+ return err;
+
+ return watchdog_init(addrs[i]);
+}
+
+static void __exit f71808e_exit(void)
+{
+ if (watchdog_is_running()) {
+ printk(KERN_WARNING DRVNAME
+ ": Watchdog timer still running, stopping it\n");
+ watchdog_stop();
+ }
+ misc_deregister(&watchdog_miscdev);
+ unregister_reboot_notifier(&watchdog_notifier);
+}
+
+MODULE_DESCRIPTION("F71808E Watchdog Driver");
+MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>");
+MODULE_LICENSE("GPL");
+
+module_init(f71808e_init);
+module_exit(f71808e_exit);
--
GitLab
From 4a370278e1041d4c62719bcd773e9c620e775901 Mon Sep 17 00:00:00 2001
From: Viresh KUMAR <viresh.kumar@st.com>
Date: Wed, 4 Aug 2010 11:44:14 +0530
Subject: [PATCH 418/863] watchdog: Adding support for ARM Primecell SP805
Watchdog
Technical Reference Manual can be found at:
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0270b/DDI0270.pdf
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/sp805_wdt.c | 387 +++++++++++++++++++++++++++++++++++
3 files changed, 395 insertions(+)
create mode 100644 drivers/watchdog/sp805_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 910e09f49b368..4d2992aadfb73 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -73,6 +73,13 @@ config WM8350_WATCHDOG
# ARM Architecture
+config ARM_SP805_WATCHDOG
+ tristate "ARM SP805 Watchdog"
+ depends on ARM_AMBA
+ help
+ ARM Primecell SP805 Watchdog timer. This will reboot your system when
+ the timeout is reached.
+
config AT91RM9200_WATCHDOG
tristate "AT91RM9200 watchdog"
depends on ARCH_AT91RM9200
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0010ae55556a4..8374503fcc6ae 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
# ALPHA Architecture
# ARM Architecture
+obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
new file mode 100644
index 0000000000000..9127eda2145b1
--- /dev/null
+++ b/drivers/watchdog/sp805_wdt.c
@@ -0,0 +1,387 @@
+/*
+ * drivers/char/watchdog/sp805-wdt.c
+ *
+ * Watchdog driver for ARM SP805 watchdog module
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2 or later. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/resource.h>
+#include <linux/amba/bus.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+/* default timeout in seconds */
+#define DEFAULT_TIMEOUT 60
+
+#define MODULE_NAME "sp805-wdt"
+
+/* watchdog register offsets and masks */
+#define WDTLOAD 0x000
+ #define LOAD_MIN 0x00000001
+ #define LOAD_MAX 0xFFFFFFFF
+#define WDTVALUE 0x004
+#define WDTCONTROL 0x008
+ /* control register masks */
+ #define INT_ENABLE (1 << 0)
+ #define RESET_ENABLE (1 << 1)
+#define WDTINTCLR 0x00C
+#define WDTRIS 0x010
+#define WDTMIS 0x014
+ #define INT_MASK (1 << 0)
+#define WDTLOCK 0xC00
+ #define UNLOCK 0x1ACCE551
+ #define LOCK 0x00000001
+
+/**
+ * struct sp805_wdt: sp805 wdt device structure
+ *
+ * lock: spin lock protecting dev structure and io access
+ * base: base address of wdt
+ * clk: clock structure of wdt
+ * dev: amba device structure of wdt
+ * status: current status of wdt
+ * load_val: load value to be set for current timeout
+ * timeout: current programmed timeout
+ */
+struct sp805_wdt {
+ spinlock_t lock;
+ void __iomem *base;
+ struct clk *clk;
+ struct amba_device *adev;
+ unsigned long status;
+ #define WDT_BUSY 0
+ #define WDT_CAN_BE_CLOSED 1
+ unsigned int load_val;
+ unsigned int timeout;
+};
+
+/* local variables */
+static struct sp805_wdt *wdt;
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+/* This routine finds load value that will reset system in required timout */
+static void wdt_setload(unsigned int timeout)
+{
+ u64 load, rate;
+
+ rate = clk_get_rate(wdt->clk);
+
+ /*
+ * sp805 runs counter with given value twice, after the end of first
+ * counter it gives an interrupt and then starts counter again. If
+ * interrupt already occured then it resets the system. This is why
+ * load is half of what should be required.
+ */
+ load = div_u64(rate, 2) * timeout - 1;
+
+ load = (load > LOAD_MAX) ? LOAD_MAX : load;
+ load = (load < LOAD_MIN) ? LOAD_MIN : load;
+
+ spin_lock(&wdt->lock);
+ wdt->load_val = load;
+ /* roundup timeout to closest positive integer value */
+ wdt->timeout = div_u64((load + 1) * 2 + (rate / 2), rate);
+ spin_unlock(&wdt->lock);
+}
+
+/* returns number of seconds left for reset to occur */
+static u32 wdt_timeleft(void)
+{
+ u64 load, rate;
+
+ rate = clk_get_rate(wdt->clk);
+
+ spin_lock(&wdt->lock);
+ load = readl(wdt->base + WDTVALUE);
+
+ /*If the interrupt is inactive then time left is WDTValue + WDTLoad. */
+ if (!(readl(wdt->base + WDTRIS) & INT_MASK))
+ load += wdt->load_val + 1;
+ spin_unlock(&wdt->lock);
+
+ return div_u64(load, rate);
+}
+
+/* enables watchdog timers reset */
+static void wdt_enable(void)
+{
+ spin_lock(&wdt->lock);
+
+ writel(UNLOCK, wdt->base + WDTLOCK);
+ writel(wdt->load_val, wdt->base + WDTLOAD);
+ writel(INT_MASK, wdt->base + WDTINTCLR);
+ writel(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL);
+ writel(LOCK, wdt->base + WDTLOCK);
+
+ spin_unlock(&wdt->lock);
+}
+
+/* disables watchdog timers reset */
+static void wdt_disable(void)
+{
+ spin_lock(&wdt->lock);
+
+ writel(UNLOCK, wdt->base + WDTLOCK);
+ writel(0, wdt->base + WDTCONTROL);
+ writel(0, wdt->base + WDTLOAD);
+ writel(LOCK, wdt->base + WDTLOCK);
+
+ spin_unlock(&wdt->lock);
+}
+
+static ssize_t sp805_wdt_write(struct file *file, const char *data,
+ size_t len, loff_t *ppos)
+{
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ clear_bit(WDT_CAN_BE_CLOSED, &wdt->status);
+
+ for (i = 0; i != len; i++) {
+ char c;
+
+ if (get_user(c, data + i))
+ return -EFAULT;
+ /* Check for Magic Close character */
+ if (c == 'V') {
+ set_bit(WDT_CAN_BE_CLOSED,
+ &wdt->status);
+ break;
+ }
+ }
+ }
+ wdt_enable();
+ }
+ return len;
+}
+
+static const struct watchdog_info ident = {
+ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = MODULE_NAME,
+};
+
+static long sp805_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret = -ENOTTY;
+ unsigned int timeout;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user((struct watchdog_info *)arg, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ ret = put_user(0, (int *)arg);
+ break;
+
+ case WDIOC_KEEPALIVE:
+ wdt_enable();
+ ret = 0;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(timeout, (unsigned int *)arg);
+ if (ret)
+ break;
+
+ wdt_setload(timeout);
+
+ wdt_enable();
+ /* Fall through */
+
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(wdt->timeout, (unsigned int *)arg);
+ break;
+ case WDIOC_GETTIMELEFT:
+ ret = put_user(wdt_timeleft(), (unsigned int *)arg);
+ break;
+ }
+ return ret;
+}
+
+static int sp805_wdt_open(struct inode *inode, struct file *file)
+{
+ int ret = 0;
+
+ if (test_and_set_bit(WDT_BUSY, &wdt->status))
+ return -EBUSY;
+
+ ret = clk_enable(wdt->clk);
+ if (ret) {
+ dev_err(&wdt->adev->dev, "clock enable fail");
+ goto err;
+ }
+
+ wdt_enable();
+
+ /* can not be closed, once enabled */
+ clear_bit(WDT_CAN_BE_CLOSED, &wdt->status);
+ return nonseekable_open(inode, file);
+
+err:
+ clear_bit(WDT_BUSY, &wdt->status);
+ return ret;
+}
+
+static int sp805_wdt_release(struct inode *inode, struct file *file)
+{
+ if (!test_bit(WDT_CAN_BE_CLOSED, &wdt->status)) {
+ clear_bit(WDT_BUSY, &wdt->status);
+ dev_warn(&wdt->adev->dev, "Device closed unexpectedly\n");
+ return 0;
+ }
+
+ wdt_disable();
+ clk_disable(wdt->clk);
+ clear_bit(WDT_BUSY, &wdt->status);
+
+ return 0;
+}
+
+static const struct file_operations sp805_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = sp805_wdt_write,
+ .unlocked_ioctl = sp805_wdt_ioctl,
+ .open = sp805_wdt_open,
+ .release = sp805_wdt_release,
+};
+
+static struct miscdevice sp805_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &sp805_wdt_fops,
+};
+
+static int __devinit
+sp805_wdt_probe(struct amba_device *adev, struct amba_id *id)
+{
+ int ret = 0;
+
+ if (!request_mem_region(adev->res.start, resource_size(&adev->res),
+ "sp805_wdt")) {
+ dev_warn(&adev->dev, "Failed to get memory region resource\n");
+ ret = -ENOENT;
+ goto err;
+ }
+
+ wdt = kzalloc(sizeof(*wdt), GFP_KERNEL);
+ if (!wdt) {
+ dev_warn(&adev->dev, "Kzalloc failed\n");
+ ret = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ wdt->clk = clk_get(&adev->dev, NULL);
+ if (IS_ERR(wdt->clk)) {
+ dev_warn(&adev->dev, "Clock not found\n");
+ ret = PTR_ERR(wdt->clk);
+ goto err_clk_get;
+ }
+
+ wdt->base = ioremap(adev->res.start, resource_size(&adev->res));
+ if (!wdt->base) {
+ ret = -ENOMEM;
+ dev_warn(&adev->dev, "ioremap fail\n");
+ goto err_ioremap;
+ }
+
+ wdt->adev = adev;
+ spin_lock_init(&wdt->lock);
+ wdt_setload(DEFAULT_TIMEOUT);
+
+ ret = misc_register(&sp805_wdt_miscdev);
+ if (ret < 0) {
+ dev_warn(&adev->dev, "cannot register misc device\n");
+ goto err_misc_register;
+ }
+
+ dev_info(&adev->dev, "registration successful\n");
+ return 0;
+
+err_misc_register:
+ iounmap(wdt->base);
+err_ioremap:
+ clk_put(wdt->clk);
+err_clk_get:
+ kfree(wdt);
+ wdt = NULL;
+err_kzalloc:
+ release_mem_region(adev->res.start, resource_size(&adev->res));
+err:
+ dev_err(&adev->dev, "Probe Failed!!!\n");
+ return ret;
+}
+
+static int __devexit sp805_wdt_remove(struct amba_device *adev)
+{
+ misc_deregister(&sp805_wdt_miscdev);
+ iounmap(wdt->base);
+ clk_put(wdt->clk);
+ kfree(wdt);
+ release_mem_region(adev->res.start, resource_size(&adev->res));
+
+ return 0;
+}
+
+static struct amba_id sp805_wdt_ids[] __initdata = {
+ {
+ .id = 0x00141805,
+ .mask = 0x00ffffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver sp805_wdt_driver = {
+ .drv = {
+ .name = MODULE_NAME,
+ },
+ .id_table = sp805_wdt_ids,
+ .probe = sp805_wdt_probe,
+ .remove = __devexit_p(sp805_wdt_remove),
+};
+
+static int __init sp805_wdt_init(void)
+{
+ return amba_driver_register(&sp805_wdt_driver);
+}
+module_init(sp805_wdt_init);
+
+static void __exit sp805_wdt_exit(void)
+{
+ amba_driver_unregister(&sp805_wdt_driver);
+}
+module_exit(sp805_wdt_exit);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+ "Set to 1 to keep watchdog running after device release");
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
--
GitLab
From adb23631a739b6a02eadf0ee5ff021cadcddfc61 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Wed, 14 Jul 2010 22:06:30 +0400
Subject: [PATCH 419/863] watchdog: hpwdt: formatting of pointers in printk()
Use %p instead of %08x in printk().
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/hpwdt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 809e7167a6243..fd312fc8940e1 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -246,8 +246,8 @@ static int __devinit cru_detect(unsigned long map_entry,
physical_bios_offset);
printk(KERN_DEBUG "hpwdt: CRU Length: 0x%lx\n",
cru_length);
- printk(KERN_DEBUG "hpwdt: CRU Mapped Address: 0x%x\n",
- (unsigned int)&cru_rom_addr);
+ printk(KERN_DEBUG "hpwdt: CRU Mapped Address: %p\n",
+ &cru_rom_addr);
}
iounmap(bios32_map);
return retval;
--
GitLab
From a1452a3771c4eb85bd779790b040efdc36f4274e Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Sun, 8 Aug 2010 20:58:20 +0100
Subject: [PATCH 420/863] mtd: Update copyright notices
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
drivers/mtd/afs.c | 2 +-
drivers/mtd/cmdlinepart.c | 17 ++++++++++++++++-
drivers/mtd/ftl.c | 2 +-
drivers/mtd/inftlcore.c | 6 +++---
drivers/mtd/inftlmount.c | 4 ++--
drivers/mtd/mtd_blkdevs.c | 18 ++++++++++++++++--
drivers/mtd/mtdblock.c | 19 +++++++++++++++++--
drivers/mtd/mtdblock_ro.c | 19 +++++++++++++++++--
drivers/mtd/mtdchar.c | 16 +++++++++++++++-
drivers/mtd/mtdconcat.c | 18 ++++++++++++++++--
drivers/mtd/mtdcore.c | 20 +++++++++++++++++---
drivers/mtd/mtdoops.c | 2 +-
drivers/mtd/mtdpart.c | 20 ++++++++++++++++----
drivers/mtd/mtdsuper.c | 2 ++
drivers/mtd/nftlcore.c | 25 ++++++++++++++++++-------
drivers/mtd/nftlmount.c | 3 ++-
drivers/mtd/ofpart.c | 4 ++--
drivers/mtd/redboot.c | 18 ++++++++++++++++++
drivers/mtd/rfd_ftl.c | 2 +-
drivers/mtd/ssfdc.c | 2 +-
include/linux/mtd/bbm.h | 18 ++++++++++++++++--
include/linux/mtd/blktrans.h | 16 ++++++++++++++--
include/linux/mtd/cfi.h | 20 +++++++++++++++++---
include/linux/mtd/cfi_endian.h | 19 +++++++++++++++++++
include/linux/mtd/concat.h | 17 +++++++++++++++--
include/linux/mtd/doc2000.h | 23 ++++++++++++++++++-----
include/linux/mtd/flashchip.h | 19 +++++++++++++++----
include/linux/mtd/gen_probe.h | 19 +++++++++++++++++--
include/linux/mtd/map.h | 18 ++++++++++++++++++
include/linux/mtd/mtd.h | 17 +++++++++++++++--
include/linux/mtd/nand.h | 6 +++---
include/linux/mtd/nand_ecc.h | 4 +++-
include/linux/mtd/nftl.h | 17 ++++++++++++++++-
include/mtd/mtd-abi.h | 17 ++++++++++++++++-
include/mtd/mtd-user.h | 17 ++++++++++++++++-
include/mtd/nftl-user.h | 16 +++++++++++++++-
include/mtd/ubi-user.h | 2 +-
37 files changed, 416 insertions(+), 68 deletions(-)
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index cec7ab98b2a9d..302372c08b566 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -2,7 +2,7 @@
drivers/mtd/afs.c: ARM Flash Layout/Partitioning
- Copyright (C) 2000 ARM Limited
+ Copyright © 2000 ARM Limited
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 1479da6d3aa6d..e790f38893b00 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -1,7 +1,22 @@
/*
* Read flash partition table from command line
*
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
+ * Copyright © 2002 SYSGO Real-Time Solutions GmbH
+ * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* The format for the command line is as follows:
*
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 62da9eb7032bd..4d6a64c387ecd 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -26,7 +26,7 @@
The initial developer of the original code is David A. Hinds
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ are Copyright © 1999 David A. Hinds. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU General Public License version 2 (the "GPL"), in
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 015a7fe1b6ee3..d7592e67d0486 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -1,11 +1,11 @@
/*
* inftlcore.c -- Linux driver for Inverse Flash Translation Layer (INFTL)
*
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright © 2002, Greg Ungerer (gerg@snapgear.com)
*
* Based heavily on the nftlcore.c code which is:
- * (c) 1999 Machine Vision Holdings, Inc.
- * Author: David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999 David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 8f988d7d3c5c9..7772d2618d9f2 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -2,11 +2,11 @@
* inftlmount.c -- INFTL mount code with extensive checks.
*
* Author: Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2002-2003, Greg Ungerer (gerg@snapgear.com)
+ * Copyright © 2002-2003, Greg Ungerer (gerg@snapgear.com)
*
* Based heavily on the nftlmount.c code which is:
* Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
+ * Copyright © 2000 Netgem S.A.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 89e07e5af5776..1d2144d774701 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -1,7 +1,21 @@
/*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ * Interface to Linux block layer for MTD 'translation layers'.
*
- * Interface to Linux 2.5 block layer for MTD 'translation layers'.
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index e6edbec609fd6..1e74ad961040d 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -1,8 +1,23 @@
/*
* Direct MTD block device access
*
- * (C) 2000-2003 Nicolas Pitre <nico@fluxnic.net>
- * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2000-2003 Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/fs.h>
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index d0d3f79f9d03e..795a8c0a05b82 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -1,7 +1,22 @@
/*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
- *
* Simple read-only (writable only for RAM) mtdblock driver
+ *
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/init.h>
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index c27e65e3e291a..f6d76f1adca03 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1,5 +1,19 @@
/*
- * Character-device access to raw MTD devices.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 4567bc373780f..bf8de09431031 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -1,11 +1,25 @@
/*
* MTD device concatenation layer
*
- * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org>
*
* NAND support by Christian Gan <cgan@iders.ca>
*
- * This code is GPL
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/kernel.h>
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index a1b8b70d2d0a0..93a11f3def449 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -2,9 +2,23 @@
* Core registration and callback routines for MTD
* drivers and users.
*
- * bdi bits are:
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2006 Red Hat UK Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/module.h>
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index 328313c3dccb4..1ee72f3f05125 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -1,7 +1,7 @@
/*
* MTD Oops/Panic logger
*
- * Copyright (C) 2007 Nokia Corporation. All rights reserved.
+ * Copyright © 2007 Nokia Corporation. All rights reserved.
*
* Author: Richard Purdie <rpurdie@openedhand.com>
*
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 4c539ded0b709..fc55074102787 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -1,12 +1,24 @@
/*
* Simple MTD partitioning layer
*
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright © 2000 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright © 2002 Thomas Gleixner <gleixner@linutronix.de>
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
*
- * This code is GPL
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * 02-21-2002 Thomas Gleixner <gleixner@autronix.de>
- * added support for read_oob, write_oob
*/
#include <linux/module.h>
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index bd9a443ccf69a..38e2ab07e7a3f 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -1,6 +1,8 @@
/* MTD-based superblock management
*
* Copyright © 2001-2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
* Written by: David Howells <dhowells@redhat.com>
* David Woodhouse <dwmw2@infradead.org>
*
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index a4578bf903aa9..b155666acfbe5 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -1,11 +1,22 @@
-/* Linux driver for NAND Flash Translation Layer */
-/* (c) 1999 Machine Vision Holdings, Inc. */
-/* Author: David Woodhouse <dwmw2@infradead.org> */
-
/*
- The contents of this file are distributed under the GNU General
- Public License version 2. The author places no additional
- restrictions of any kind on it.
+ * Linux driver for NAND Flash Translation Layer
+ *
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define PRERELEASE
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 8b22b1836e9fe..e3cd1ffad2f62 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -2,7 +2,8 @@
* NFTL mount code with extensive checks
*
* Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
+ * Copyright © 2000 Netgem S.A.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 4f0d635674f33..8bf7dc6d1ce6a 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -1,11 +1,11 @@
/*
* Flash partitions described by the OF (or flattened) device tree
*
- * Copyright (C) 2006 MontaVista Software Inc.
+ * Copyright © 2006 MontaVista Software Inc.
* Author: Vitaly Wool <vwool@ru.mvista.com>
*
* Revised to handle newer style flash binding by:
- * Copyright (C) 2007 David Gibson, IBM Corporation.
+ * Copyright © 2007 David Gibson, IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 2d600a1bf2aa7..7a87d07cd79f4 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,6 +1,24 @@
/*
* Parse RedBoot-style Flash Image System (FIS) tables and
* produce a Linux partition array to match.
+ *
+ * Copyright © 2001 Red Hat UK Limited
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#include <linux/kernel.h>
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index 63b83c0d9a134..cc4d1805b864d 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -1,7 +1,7 @@
/*
* rfd_ftl.c -- resident flash disk (flash translation layer)
*
- * Copyright (C) 2005 Sean Young <sean@mess.org>
+ * Copyright © 2005 Sean Young <sean@mess.org>
*
* This type of flash translation layer (FTL) is used by the Embedded BIOS
* by General Software. It is known as the Resident Flash Disk (RFD), see:
diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
index 81c4ecdc11f51..5cd1897933329 100644
--- a/drivers/mtd/ssfdc.c
+++ b/drivers/mtd/ssfdc.c
@@ -1,6 +1,6 @@
/*
* Linux driver for SSFDC Flash Translation Layer (Read only)
- * (c) 2005 Eptar srl
+ * © 2005 Eptar srl
* Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
*
* Based on NTFL and MTDBLOCK_RO drivers
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index a04b962492a8b..7fa20beb2ab9e 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -4,12 +4,26 @@
* NAND family Bad Block Management (BBM) header file
* - Bad Block Table (BBT) implementation
*
- * Copyright (c) 2005 Samsung Electronics
+ * Copyright © 2005 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
- * Copyright (c) 2000-2005
+ * Copyright © 2000-2005
* Thomas Gleixner <tglx@linuxtronix.de>
*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __LINUX_MTD_BBM_H
#define __LINUX_MTD_BBM_H
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index b481ccd7ff3c3..26529ebd59ccf 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -1,7 +1,19 @@
/*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
*
- * Interface to Linux block layer for MTD 'translation layers'.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 574d9ee066f1b..d2118b0eac9ae 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -1,6 +1,20 @@
-
-/* Common Flash Interface structures
- * See http://support.intel.com/design/flash/technote/index.htm
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __MTD_CFI_H__
diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h
index d802f7736be3a..51cc3f5917a80 100644
--- a/include/linux/mtd/cfi_endian.h
+++ b/include/linux/mtd/cfi_endian.h
@@ -1,3 +1,22 @@
+/*
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
#include <asm/byteorder.h>
#ifndef CONFIG_MTD_CFI_ADV_OPTIONS
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
index e80c674daeb38..ccdbe93a909c2 100644
--- a/include/linux/mtd/concat.h
+++ b/include/linux/mtd/concat.h
@@ -1,9 +1,22 @@
/*
* MTD device concatenation layer definitions
*
- * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002 Robert Kaiser <rkaiser@sysgo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * This code is GPL
*/
#ifndef MTD_CONCAT_H
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 0a6d516ab71d9..0f6fea73a1f67 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -1,12 +1,25 @@
/*
* Linux driver for Disk-On-Chip devices
*
- * Copyright (C) 1999 Machine Vision Holdings, Inc.
- * Copyright (C) 2001-2003 David Woodhouse <dwmw2@infradead.org>
- * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2002-2003 SnapGear Inc
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2002-2003 Greg Ungerer <gerg@snapgear.com>
+ * Copyright © 2002-2003 SnapGear Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * Released under GPL
*/
#ifndef __MTD_DOC2000_H__
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index 23cc10f8e3435..b63fa457febd8 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -1,10 +1,21 @@
-
/*
- * struct flchip definition
+ * Copyright © 2000 Red Hat UK Limited
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
- * Contains information about the location and state of a given flash device
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * (C) 2000 Red Hat. GPLd.
*/
#ifndef __MTD_FLASHCHIP_H__
diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h
index df362ddf2949f..2c456054fded8 100644
--- a/include/linux/mtd/gen_probe.h
+++ b/include/linux/mtd/gen_probe.h
@@ -1,6 +1,21 @@
/*
- * (C) 2001, 2001 Red Hat, Inc.
- * GPL'd
+ * Copyright © 2001 Red Hat UK Limited
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __LINUX_MTD_GEN_PROBE_H__
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index de89eca864ce0..eea3a4fb7405b 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -1,3 +1,21 @@
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
/* Overhauled routines for dealing with different mmap regions of flash */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 43b7d72c6116a..eae914e97f33f 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,7 +1,20 @@
/*
- * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
- * Released under GPL
*/
#ifndef __MTD_MTD_H__
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 50f3aa00a4522..102e12c58cb3b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -1,9 +1,9 @@
/*
* linux/include/linux/mtd/nand.h
*
- * Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org>
- * Steven J. Hill <sjhill@realitydiluted.com>
- * Thomas Gleixner <tglx@linutronix.de>
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ * Steven J. Hill <sjhill@realitydiluted.com>
+ * Thomas Gleixner <tglx@linutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 41bc013571d05..4d8406c816523 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -1,7 +1,9 @@
/*
* drivers/mtd/nand_ecc.h
*
- * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * Copyright (C) 2000-2010 Steven J. Hill <sjhill@realitydiluted.com>
+ * David Woodhouse <dwmw2@infradead.org>
+ * Thomas Gleixner <tglx@linutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index dcaf611ed7482..b059629e22bc6 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -1,5 +1,20 @@
/*
- * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __MTD_NFTL_H__
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index e12872e3c694b..4debb45146347 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -1,5 +1,20 @@
/*
- * Portions of MTD ABI definition which are shared by kernel and user space
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __MTD_ABI_H__
diff --git a/include/mtd/mtd-user.h b/include/mtd/mtd-user.h
index 170ceca3b2d08..aa3c2f86a9133 100644
--- a/include/mtd/mtd-user.h
+++ b/include/mtd/mtd-user.h
@@ -1,5 +1,20 @@
/*
- * MTD ABI header for use by user space only.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
*/
#ifndef __MTD_USER_H__
diff --git a/include/mtd/nftl-user.h b/include/mtd/nftl-user.h
index 98e9e57f22de1..bdeabd86ad99e 100644
--- a/include/mtd/nftl-user.h
+++ b/include/mtd/nftl-user.h
@@ -1,5 +1,19 @@
/*
- * Parts of NFTL headers shared with userspace
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index 466a8320f1e6d..c0d47ad4b103b 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) International Business Machines Corp., 2006
+ * Copyright © International Business Machines Corp., 2006
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
--
GitLab
From 6ae0185fe201eae0548dace2a84acb5050fc8606 Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Sun, 8 Aug 2010 21:19:42 +0100
Subject: [PATCH 421/863] mtd: Remove obsolete <mtd/compatmac.h> include
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/chips/cfi_cmdset_0001.c | 1 -
drivers/mtd/chips/cfi_cmdset_0002.c | 1 -
drivers/mtd/chips/cfi_cmdset_0020.c | 1 -
drivers/mtd/chips/cfi_util.c | 1 -
drivers/mtd/chips/chipreg.c | 1 -
drivers/mtd/chips/map_absent.c | 1 -
drivers/mtd/chips/map_ram.c | 1 -
drivers/mtd/chips/map_rom.c | 1 -
drivers/mtd/devices/docecc.c | 1 -
drivers/mtd/devices/docprobe.c | 1 -
drivers/mtd/devices/mtdram.c | 1 -
drivers/mtd/devices/pmc551.c | 1 -
drivers/mtd/inftlmount.c | 1 -
drivers/mtd/mtdchar.c | 1 -
drivers/mtd/mtdcore.c | 1 -
drivers/mtd/mtdpart.c | 1 -
drivers/mtd/nand/diskonchip.c | 1 -
drivers/mtd/nand/nand_base.c | 1 -
drivers/mtd/nand/nand_bbt.c | 1 -
drivers/mtd/nand/rtc_from4.c | 1 -
drivers/mtd/onenand/onenand_bbt.c | 1 -
fs/jffs2/nodelist.h | 1 -
include/linux/mtd/compatmac.h | 10 ----------
include/linux/mtd/map.h | 1 -
include/linux/mtd/mtd.h | 1 -
25 files changed, 34 deletions(-)
delete mode 100644 include/linux/mtd/compatmac.h
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 97d5546f9ea43..9e2b7e9e0ad91 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -34,7 +34,6 @@
#include <linux/mtd/xip.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/cfi.h>
/* #define CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE */
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index bd20d1ff1b0d9..3e6c47bdce530 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -33,7 +33,6 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/cfi.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index e54e8c169d765..314af1f5a370e 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -33,7 +33,6 @@
#include <linux/mtd/map.h>
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index d7c2c672757e4..e503b2ca894de 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -22,7 +22,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/cfi.h>
-#include <linux/mtd/compatmac.h>
int __xipram cfi_qry_present(struct map_info *map, __u32 base,
struct cfi_private *cfi)
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
index c857609682276..da1f96f385c70 100644
--- a/drivers/mtd/chips/chipreg.c
+++ b/drivers/mtd/chips/chipreg.c
@@ -10,7 +10,6 @@
#include <linux/slab.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
static DEFINE_SPINLOCK(chip_drvs_lock);
static LIST_HEAD(chip_drvs_list);
diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c
index 494d30d0631a3..f2b8729468718 100644
--- a/drivers/mtd/chips/map_absent.c
+++ b/drivers/mtd/chips/map_absent.c
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
static int map_absent_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int map_absent_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index 6bdc50c727e7b..67640ccb2d416 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
static int mapram_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index 076090a67b908..593f73d480d2c 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index a19cda52da5c1..a99838bb2dc08 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -31,7 +31,6 @@
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/mtd/compatmac.h> /* for min() in older kernels */
#include <linux/mtd/mtd.h>
#include <linux/mtd/doc2000.h>
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 6e62922942b18..d374603493a7d 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -49,7 +49,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/doc2000.h>
-#include <linux/mtd/compatmac.h>
/* Where to look for the devices? */
#ifndef CONFIG_MTD_DOCPROBE_ADDRESS
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index fce5ff7589aa7..26a6e809013d2 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -14,7 +14,6 @@
#include <linux/ioport.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/mtdram.h>
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index fc8ea0a57ac20..ef0aba0ce58fd 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -98,7 +98,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/pmc551.h>
-#include <linux/mtd/compatmac.h>
static struct mtd_info *pmc551list;
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 7772d2618d9f2..104052e774b06 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -34,7 +34,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nftl.h>
#include <linux/mtd/inftl.h>
-#include <linux/mtd/compatmac.h>
/*
* find_boot_record: Find the INFTL Media Header and its Spare copy which
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index f6d76f1adca03..638827a25b778 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -33,7 +33,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
#include <asm/uaccess.h>
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 93a11f3def449..527cebf58da46 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -31,7 +31,6 @@
#include <linux/err.h>
#include <linux/ioctl.h>
#include <linux/init.h>
-#include <linux/mtd/compatmac.h>
#include <linux/proc_fs.h>
#include <linux/idr.h>
#include <linux/backing-dev.h>
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index fc55074102787..dc65585688765 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -29,7 +29,6 @@
#include <linux/kmod.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/compatmac.h>
/* Our partition linked list */
static LIST_HEAD(mtd_partitions);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 51315f55f9057..b7f8de7b27801 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -29,7 +29,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/doc2000.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/inftl.h>
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ee6a6f866b502..16a1714df0085 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -42,7 +42,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/leds.h>
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 469de17107e5f..5fedf4a74f16c 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -55,7 +55,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index a033c4cd8e16e..67440b5beef8c 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -24,7 +24,6 @@
#include <linux/rslib.h>
#include <linux/bitrev.h>
#include <linux/module.h>
-#include <linux/mtd/compatmac.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index a91fcac1af01c..01ab5b3c453be 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
-#include <linux/mtd/compatmac.h>
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
index a881a42f19e31..523a916910520 100644
--- a/fs/jffs2/nodelist.h
+++ b/fs/jffs2/nodelist.h
@@ -24,7 +24,6 @@
#ifdef __ECOS
#include "os-ecos.h"
#else
-#include <linux/mtd/compatmac.h> /* For compatibility with older kernels */
#include "os-linux.h"
#endif
diff --git a/include/linux/mtd/compatmac.h b/include/linux/mtd/compatmac.h
deleted file mode 100644
index 7d1300d9bd519..0000000000000
--- a/include/linux/mtd/compatmac.h
+++ /dev/null
@@ -1,10 +0,0 @@
-
-#ifndef __LINUX_MTD_COMPATMAC_H__
-#define __LINUX_MTD_COMPATMAC_H__
-
-/* Nothing to see here. We write 2.5-compatible code and this
- file makes it all OK in older kernels, but it's empty in _current_
- kernels. Include guard just to make GCC ignore it in future inclusions
- anyway... */
-
-#endif /* __LINUX_MTD_COMPATMAC_H__ */
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index eea3a4fb7405b..a9e6ba46865eb 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -27,7 +27,6 @@
#include <linux/string.h>
#include <linux/bug.h>
-#include <linux/mtd/compatmac.h>
#include <asm/unaligned.h>
#include <asm/system.h>
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index eae914e97f33f..8485e42a9b092 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -26,7 +26,6 @@
#include <linux/notifier.h>
#include <linux/device.h>
-#include <linux/mtd/compatmac.h>
#include <mtd/mtd-abi.h>
#include <asm/div64.h>
--
GitLab
From 145b64b9588c123d2bd00981c5ce8e03215ed2ee Mon Sep 17 00:00:00 2001
From: Holger Hans Peter Freyther <zecke@selfish.org>
Date: Thu, 22 Jul 2010 19:54:13 +0800
Subject: [PATCH 422/863] kmemleak: Fix typo in the comment
Fix typo in comment.
Signed-off-by: Holger Hans Peter Freyther <zecke@selfish.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
mm/kmemleak.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 5f2eb5b236583..bd9bc214091b3 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -700,7 +700,7 @@ static void paint_ptr(unsigned long ptr, int color)
}
/*
- * Make a object permanently as gray-colored so that it can no longer be
+ * Mark an object permanently as gray-colored so that it can no longer be
* reported as a leak. This is used in general to mark a false positive.
*/
static void make_gray_object(unsigned long ptr)
--
GitLab
From 86a5ef7d777cdd61dfe82379d559dbea069aea3d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sun, 4 Jul 2010 00:15:09 +0200
Subject: [PATCH 423/863] v4l: Convert v4l2-dev to unlocked_ioctl
v4l2 implements two separate file operations for drivers that
use locked and unlocked ioctl callbacks. Since we want to remove
the ioctl file operation in favor of the unlocked variant, this
separation no longer seems helpful.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
drivers/media/video/v4l2-dev.c | 52 ++++++++++------------------------
1 file changed, 15 insertions(+), 37 deletions(-)
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 0ca7ec9ca9026..a869418bb8d26 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -215,28 +216,24 @@ static unsigned int v4l2_poll(struct file *filp, struct poll_table_struct *poll)
return vdev->fops->poll(filp, poll);
}
-static int v4l2_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
+static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct video_device *vdev = video_devdata(filp);
+ int ret;
- if (!vdev->fops->ioctl)
- return -ENOTTY;
/* Allow ioctl to continue even if the device was unregistered.
Things like dequeueing buffers might still be useful. */
- return vdev->fops->ioctl(filp, cmd, arg);
-}
-
-static long v4l2_unlocked_ioctl(struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- struct video_device *vdev = video_devdata(filp);
+ if (vdev->fops->unlocked_ioctl) {
+ ret = vdev->fops->unlocked_ioctl(filp, cmd, arg);
+ } else if (vdev->fops->ioctl) {
+ /* TODO: convert all drivers to unlocked_ioctl */
+ lock_kernel();
+ ret = vdev->fops->ioctl(filp, cmd, arg);
+ unlock_kernel();
+ } else
+ ret = -ENOTTY;
- if (!vdev->fops->unlocked_ioctl)
- return -ENOTTY;
- /* Allow ioctl to continue even if the device was unregistered.
- Things like dequeueing buffers might still be useful. */
- return vdev->fops->unlocked_ioctl(filp, cmd, arg);
+ return ret;
}
#ifdef CONFIG_MMU
@@ -307,22 +304,6 @@ static int v4l2_release(struct inode *inode, struct file *filp)
return ret;
}
-static const struct file_operations v4l2_unlocked_fops = {
- .owner = THIS_MODULE,
- .read = v4l2_read,
- .write = v4l2_write,
- .open = v4l2_open,
- .get_unmapped_area = v4l2_get_unmapped_area,
- .mmap = v4l2_mmap,
- .unlocked_ioctl = v4l2_unlocked_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = v4l2_compat_ioctl32,
-#endif
- .release = v4l2_release,
- .poll = v4l2_poll,
- .llseek = no_llseek,
-};
-
static const struct file_operations v4l2_fops = {
.owner = THIS_MODULE,
.read = v4l2_read,
@@ -330,7 +311,7 @@ static const struct file_operations v4l2_fops = {
.open = v4l2_open,
.get_unmapped_area = v4l2_get_unmapped_area,
.mmap = v4l2_mmap,
- .ioctl = v4l2_ioctl,
+ .unlocked_ioctl = v4l2_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = v4l2_compat_ioctl32,
#endif
@@ -521,10 +502,7 @@ static int __video_register_device(struct video_device *vdev, int type, int nr,
ret = -ENOMEM;
goto cleanup;
}
- if (vdev->fops->unlocked_ioctl)
- vdev->cdev->ops = &v4l2_unlocked_fops;
- else
- vdev->cdev->ops = &v4l2_fops;
+ vdev->cdev->ops = &v4l2_fops;
vdev->cdev->owner = vdev->fops->owner;
ret = cdev_add(vdev->cdev, MKDEV(VIDEO_MAJOR, vdev->minor), 1);
if (ret < 0) {
--
GitLab
From c9243f5bdd6637b2bb7dc254b54d9edf957ef17e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sun, 4 Jul 2010 00:15:07 +0200
Subject: [PATCH 424/863] autofs/autofs4: Move compat_ioctl handling into fs
Handling of autofs ioctl numbers does not need to be generic
and can easily be done directly in autofs itself.
This also pushes the BKL into autofs and autofs4 ioctl
methods.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Cc: Autofs <autofs@linux.kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
fs/autofs/root.c | 67 +++++++++++++++++++++++++++++++++++++++--
fs/autofs4/root.c | 49 ++++++++++++++++++++++++++++++
fs/compat_ioctl.c | 36 ----------------------
include/linux/auto_fs.h | 1 +
4 files changed, 114 insertions(+), 39 deletions(-)
diff --git a/fs/autofs/root.c b/fs/autofs/root.c
index 9a0520b50663b..11b1ea786d006 100644
--- a/fs/autofs/root.c
+++ b/fs/autofs/root.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/param.h>
#include <linux/time.h>
+#include <linux/compat.h>
#include <linux/smp_lock.h>
#include "autofs_i.h"
@@ -25,13 +26,17 @@ static int autofs_root_symlink(struct inode *,struct dentry *,const char *);
static int autofs_root_unlink(struct inode *,struct dentry *);
static int autofs_root_rmdir(struct inode *,struct dentry *);
static int autofs_root_mkdir(struct inode *,struct dentry *,int);
-static int autofs_root_ioctl(struct inode *, struct file *,unsigned int,unsigned long);
+static long autofs_root_ioctl(struct file *,unsigned int,unsigned long);
+static long autofs_root_compat_ioctl(struct file *,unsigned int,unsigned long);
const struct file_operations autofs_root_operations = {
.llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = autofs_root_readdir,
- .ioctl = autofs_root_ioctl,
+ .unlocked_ioctl = autofs_root_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = autofs_root_compat_ioctl,
+#endif
};
const struct inode_operations autofs_root_inode_operations = {
@@ -492,6 +497,25 @@ static int autofs_root_mkdir(struct inode *dir, struct dentry *dentry, int mode)
}
/* Get/set timeout ioctl() operation */
+#ifdef CONFIG_COMPAT
+static inline int autofs_compat_get_set_timeout(struct autofs_sb_info *sbi,
+ unsigned int __user *p)
+{
+ unsigned long ntimeout;
+
+ if (get_user(ntimeout, p) ||
+ put_user(sbi->exp_timeout / HZ, p))
+ return -EFAULT;
+
+ if (ntimeout > UINT_MAX/HZ)
+ sbi->exp_timeout = 0;
+ else
+ sbi->exp_timeout = ntimeout * HZ;
+
+ return 0;
+}
+#endif
+
static inline int autofs_get_set_timeout(struct autofs_sb_info *sbi,
unsigned long __user *p)
{
@@ -546,7 +570,7 @@ static inline int autofs_expire_run(struct super_block *sb,
* ioctl()'s on the root directory is the chief method for the daemon to
* generate kernel reactions
*/
-static int autofs_root_ioctl(struct inode *inode, struct file *filp,
+static int autofs_do_root_ioctl(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg)
{
struct autofs_sb_info *sbi = autofs_sbi(inode->i_sb);
@@ -571,6 +595,10 @@ static int autofs_root_ioctl(struct inode *inode, struct file *filp,
return 0;
case AUTOFS_IOC_PROTOVER: /* Get protocol version */
return autofs_get_protover(argp);
+#ifdef CONFIG_COMPAT
+ case AUTOFS_IOC_SETTIMEOUT32:
+ return autofs_compat_get_set_timeout(sbi, argp);
+#endif
case AUTOFS_IOC_SETTIMEOUT:
return autofs_get_set_timeout(sbi, argp);
case AUTOFS_IOC_EXPIRE:
@@ -579,4 +607,37 @@ static int autofs_root_ioctl(struct inode *inode, struct file *filp,
default:
return -ENOSYS;
}
+
+}
+
+static long autofs_root_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ ret = autofs_do_root_ioctl(filp->f_path.dentry->d_inode,
+ filp, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
+#ifdef CONFIG_COMPAT
+static long autofs_root_compat_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ int ret;
+
+ lock_kernel();
+ if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
+ ret = autofs_do_root_ioctl(inode, filp, cmd, arg);
+ else
+ ret = autofs_do_root_ioctl(inode, filp, cmd,
+ (unsigned long)compat_ptr(arg));
+ unlock_kernel();
+
+ return ret;
}
+#endif
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index db4117ed78031..48e056e70fd6b 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -18,7 +18,9 @@
#include <linux/slab.h>
#include <linux/param.h>
#include <linux/time.h>
+#include <linux/compat.h>
#include <linux/smp_lock.h>
+
#include "autofs_i.h"
static int autofs4_dir_symlink(struct inode *,struct dentry *,const char *);
@@ -26,6 +28,7 @@ static int autofs4_dir_unlink(struct inode *,struct dentry *);
static int autofs4_dir_rmdir(struct inode *,struct dentry *);
static int autofs4_dir_mkdir(struct inode *,struct dentry *,int);
static long autofs4_root_ioctl(struct file *,unsigned int,unsigned long);
+static long autofs4_root_compat_ioctl(struct file *,unsigned int,unsigned long);
static int autofs4_dir_open(struct inode *inode, struct file *file);
static struct dentry *autofs4_lookup(struct inode *,struct dentry *, struct nameidata *);
static void *autofs4_follow_link(struct dentry *, struct nameidata *);
@@ -40,6 +43,9 @@ const struct file_operations autofs4_root_operations = {
.readdir = dcache_readdir,
.llseek = dcache_dir_lseek,
.unlocked_ioctl = autofs4_root_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = autofs4_root_compat_ioctl,
+#endif
};
const struct file_operations autofs4_dir_operations = {
@@ -840,6 +846,26 @@ static int autofs4_dir_mkdir(struct inode *dir, struct dentry *dentry, int mode)
}
/* Get/set timeout ioctl() operation */
+#ifdef CONFIG_COMPAT
+static inline int autofs4_compat_get_set_timeout(struct autofs_sb_info *sbi,
+ compat_ulong_t __user *p)
+{
+ int rv;
+ unsigned long ntimeout;
+
+ if ((rv = get_user(ntimeout, p)) ||
+ (rv = put_user(sbi->exp_timeout/HZ, p)))
+ return rv;
+
+ if (ntimeout > UINT_MAX/HZ)
+ sbi->exp_timeout = 0;
+ else
+ sbi->exp_timeout = ntimeout * HZ;
+
+ return 0;
+}
+#endif
+
static inline int autofs4_get_set_timeout(struct autofs_sb_info *sbi,
unsigned long __user *p)
{
@@ -933,6 +959,10 @@ static int autofs4_root_ioctl_unlocked(struct inode *inode, struct file *filp,
return autofs4_get_protosubver(sbi, p);
case AUTOFS_IOC_SETTIMEOUT:
return autofs4_get_set_timeout(sbi, p);
+#ifdef CONFIG_COMPAT
+ case AUTOFS_IOC_SETTIMEOUT32:
+ return autofs4_compat_get_set_timeout(sbi, p);
+#endif
case AUTOFS_IOC_ASKUMOUNT:
return autofs4_ask_umount(filp->f_path.mnt, p);
@@ -961,3 +991,22 @@ static long autofs4_root_ioctl(struct file *filp,
return ret;
}
+
+#ifdef CONFIG_COMPAT
+static long autofs4_root_compat_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ int ret;
+
+ lock_kernel();
+ if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
+ ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
+ else
+ ret = autofs4_root_ioctl_unlocked(inode, filp, cmd,
+ (unsigned long)compat_ptr(arg));
+ unlock_kernel();
+
+ return ret;
+}
+#endif
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 641640dc7ae54..618f38136304f 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -131,23 +131,6 @@ static int w_long(unsigned int fd, unsigned int cmd,
return err;
}
-static int rw_long(unsigned int fd, unsigned int cmd,
- compat_ulong_t __user *argp)
-{
- mm_segment_t old_fs = get_fs();
- int err;
- unsigned long val;
-
- if(get_user(val, argp))
- return -EFAULT;
- set_fs (KERNEL_DS);
- err = sys_ioctl(fd, cmd, (unsigned long)&val);
- set_fs (old_fs);
- if (!err && put_user(val, argp))
- return -EFAULT;
- return err;
-}
-
struct compat_video_event {
int32_t type;
compat_time_t timestamp;
@@ -594,12 +577,6 @@ static int do_smb_getmountuid(unsigned int fd, unsigned int cmd,
return err;
}
-static int ioc_settimeout(unsigned int fd, unsigned int cmd,
- compat_ulong_t __user *argp)
-{
- return rw_long(fd, AUTOFS_IOC_SETTIMEOUT, argp);
-}
-
/* Bluetooth ioctls */
#define HCIUARTSETPROTO _IOW('U', 200, int)
#define HCIUARTGETPROTO _IOR('U', 201, int)
@@ -1281,13 +1258,6 @@ COMPATIBLE_IOCTL(SOUND_MIXER_PRIVATE5)
COMPATIBLE_IOCTL(SOUND_MIXER_GETLEVELS)
COMPATIBLE_IOCTL(SOUND_MIXER_SETLEVELS)
COMPATIBLE_IOCTL(OSS_GETVERSION)
-/* AUTOFS */
-COMPATIBLE_IOCTL(AUTOFS_IOC_CATATONIC)
-COMPATIBLE_IOCTL(AUTOFS_IOC_PROTOVER)
-COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE)
-COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE_MULTI)
-COMPATIBLE_IOCTL(AUTOFS_IOC_PROTOSUBVER)
-COMPATIBLE_IOCTL(AUTOFS_IOC_ASKUMOUNT)
/* Raw devices */
COMPATIBLE_IOCTL(RAW_SETBIND)
COMPATIBLE_IOCTL(RAW_GETBIND)
@@ -1552,9 +1522,6 @@ static long do_ioctl_trans(int fd, unsigned int cmd,
case RAW_GETBIND:
return raw_ioctl(fd, cmd, argp);
#endif
-#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,unsigned int)
- case AUTOFS_IOC_SETTIMEOUT32:
- return ioc_settimeout(fd, cmd, argp);
/* One SMB ioctl needs translations. */
#define SMB_IOC_GETMOUNTUID_32 _IOR('u', 1, compat_uid_t)
case SMB_IOC_GETMOUNTUID_32:
@@ -1609,9 +1576,6 @@ static long do_ioctl_trans(int fd, unsigned int cmd,
case KDSKBMETA:
case KDSKBLED:
case KDSETLED:
- /* AUTOFS */
- case AUTOFS_IOC_READY:
- case AUTOFS_IOC_FAIL:
/* NBD */
case NBD_SET_SOCK:
case NBD_SET_BLKSIZE:
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
index 7b09c8348fd38..da64e15004b64 100644
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -79,6 +79,7 @@ struct autofs_packet_expire {
#define AUTOFS_IOC_FAIL _IO(0x93,0x61)
#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62)
#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int)
+#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire)
--
GitLab
From 5ef06839f50c7e5e479d3595257131edf1f84f36 Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Mon, 9 Aug 2010 03:28:40 +0200
Subject: [PATCH 425/863] staging: Pushdown bkl to easycap ioctl handlers
These were amongst the last users of struct file_operations:ioctl
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
drivers/staging/easycap/easycap.h | 8 +---
drivers/staging/easycap/easycap_ioctl.c | 52 ++++++++++++++-----------
drivers/staging/easycap/easycap_main.c | 38 +++++++++---------
3 files changed, 51 insertions(+), 47 deletions(-)
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h
index ad836d2d26fe6..f3c827eb0abe0 100644
--- a/drivers/staging/easycap/easycap.h
+++ b/drivers/staging/easycap/easycap.h
@@ -463,15 +463,12 @@ struct data_buffer audio_buffer[];
void easycap_complete(struct urb *);
int easycap_open(struct inode *, struct file *);
int easycap_release(struct inode *, struct file *);
-int easycap_ioctl(struct inode *, struct file *, \
- unsigned int, unsigned long);
+long easycap_ioctl(struct file *, unsigned int, unsigned long);
/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
int easycap_open_noinode(struct file *);
int easycap_release_noinode(struct file *);
-long easycap_ioctl_noinode(struct file *, \
- unsigned int, unsigned long);
int videodev_release(struct video_device *);
#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
@@ -515,8 +512,7 @@ void easysnd_complete(struct urb *);
ssize_t easysnd_read(struct file *, char __user *, size_t, loff_t *);
int easysnd_open(struct inode *, struct file *);
int easysnd_release(struct inode *, struct file *);
-int easysnd_ioctl(struct inode *, struct file *, \
- unsigned int, unsigned long);
+long easysnd_ioctl(struct file *, unsigned int, unsigned long);
unsigned int easysnd_poll(struct file *, poll_table *);
void easysnd_delete(struct kref *);
int submit_audio_urbs(struct easycap *);
diff --git a/drivers/staging/easycap/easycap_ioctl.c b/drivers/staging/easycap/easycap_ioctl.c
index 276b63dfe27ee..9a42ae02cd5dc 100644
--- a/drivers/staging/easycap/easycap_ioctl.c
+++ b/drivers/staging/easycap/easycap_ioctl.c
@@ -25,6 +25,7 @@
*/
/*****************************************************************************/
+#include <linux/smp_lock.h>
#include "easycap.h"
#include "easycap_debug.h"
#include "easycap_standard.h"
@@ -773,19 +774,10 @@ while (0xFFFFFFFF != easycap_control[i1].id) {
SAY("WARNING: failed to adjust mute: control not found\n");
return -ENOENT;
}
-/****************************************************************************/
-/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
-#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
-long
-easycap_ioctl_noinode(struct file *file, unsigned int cmd, unsigned long arg)\
- {
- return easycap_ioctl((struct inode *)NULL, file, cmd, arg);
-}
-#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+
/*--------------------------------------------------------------------------*/
-int easycap_ioctl(struct inode *inode, struct file *file, \
- unsigned int cmd, unsigned long arg)
+static int easycap_ioctl_bkl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
static struct easycap *peasycap;
static struct usb_device *p;
@@ -1956,19 +1948,22 @@ default: {
}
return 0;
}
-/****************************************************************************/
-/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
-#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
-long
-easysnd_ioctl_noinode(struct file *file, unsigned int cmd, unsigned long arg)
+
+long easycap_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- return easysnd_ioctl((struct inode *)NULL, file, cmd, arg);
+ struct inode *inode = file->f_dentry->d_inode;
+ long ret;
+
+ lock_kernel();
+ ret = easycap_ioctl_bkl(inode, file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
}
-#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+
/*--------------------------------------------------------------------------*/
-int easysnd_ioctl(struct inode *inode, struct file *file, \
- unsigned int cmd, unsigned long arg)
+static int easysnd_ioctl_bkl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
struct easycap *peasycap;
struct usb_device *p;
@@ -2158,6 +2153,19 @@ default: {
}
return 0;
}
+
+long easysnd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode = file->f_dentry->d_inode;
+ long ret;
+
+ lock_kernel();
+ ret = easysnd_ioctl_bkl(inode, file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
/*****************************************************************************/
int explain_ioctl(__u32 wot)
{
diff --git a/drivers/staging/easycap/easycap_main.c b/drivers/staging/easycap/easycap_main.c
index 09c194ce10a39..5a4bbd9b453f1 100644
--- a/drivers/staging/easycap/easycap_main.c
+++ b/drivers/staging/easycap/easycap_main.c
@@ -60,13 +60,13 @@ struct usb_driver easycap_usb_driver = {
*/
/*---------------------------------------------------------------------------*/
const struct file_operations easycap_fops = {
-.owner = THIS_MODULE,
-.open = easycap_open,
-.release = easycap_release,
-.ioctl = easycap_ioctl,
-.poll = easycap_poll,
-.mmap = easycap_mmap,
-.llseek = no_llseek,
+ .owner = THIS_MODULE,
+ .open = easycap_open,
+ .release = easycap_release,
+ .unlocked_ioctl = easycap_ioctl,
+ .poll = easycap_poll,
+ .mmap = easycap_mmap,
+ .llseek = no_llseek,
};
struct vm_operations_struct easycap_vm_ops = {
.open = easycap_vma_open,
@@ -83,12 +83,12 @@ struct usb_class_driver easycap_class = {
#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
#if defined(EASYCAP_NEEDS_V4L2_FOPS)
const struct v4l2_file_operations v4l2_fops = {
-.owner = THIS_MODULE,
-.open = easycap_open_noinode,
-.release = easycap_release_noinode,
-.ioctl = easycap_ioctl_noinode,
-.poll = easycap_poll,
-.mmap = easycap_mmap,
+ .owner = THIS_MODULE,
+ .open = easycap_open_noinode,
+ .release = easycap_release_noinode,
+ .unlocked_ioctl = easycap_ioctl,
+ .poll = easycap_poll,
+ .mmap = easycap_mmap,
};
#endif /*EASYCAP_NEEDS_V4L2_FOPS*/
int video_device_many /*=0*/;
@@ -102,12 +102,12 @@ struct video_device *pvideo_array[VIDEO_DEVICE_MANY], *pvideo_device;
*/
/*--------------------------------------------------------------------------*/
const struct file_operations easysnd_fops = {
-.owner = THIS_MODULE,
-.open = easysnd_open,
-.release = easysnd_release,
-.ioctl = easysnd_ioctl,
-.read = easysnd_read,
-.llseek = no_llseek,
+ .owner = THIS_MODULE,
+ .open = easysnd_open,
+ .release = easysnd_release,
+ .unlocked_ioctl = easysnd_ioctl,
+ .read = easysnd_read,
+ .llseek = no_llseek,
};
struct usb_class_driver easysnd_class = {
.name = "usb/easysnd%d",
--
GitLab
From a4cc14ec9f0ef579262a81170a2eaf760844c471 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Sun, 8 Aug 2010 21:50:05 -0400
Subject: [PATCH 426/863] xen-blkfront: fix missing out label
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
drivers/block/xen-blkfront.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index ae5f92b5752e8..67d9bfab59fa5 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1232,6 +1232,7 @@ static int blkif_release(struct gendisk *disk, fmode_t mode)
kfree(info);
}
+out:
unlock_kernel();
return 0;
}
--
GitLab
From 11ce884a0df4487b9f9f9e0605a1f16321637d24 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 06:39:40 -0300
Subject: [PATCH 427/863] V4L/DVB: gspca - sonixj / sq930x / t613: Remove
unused variable in struct sd
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The sensor enum definition was not at the right place.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/sonixj.c | 10 +++++-----
drivers/media/video/gspca/sq930x.c | 12 +++++-------
drivers/media/video/gspca/t613.c | 4 ++--
3 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index ee17b034bf6b9..370544361be2e 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -66,7 +66,11 @@ struct sd {
#define BRIDGE_SN9C110 2
#define BRIDGE_SN9C120 3
u8 sensor; /* Type of image sensor chip */
-enum {
+ u8 i2c_addr;
+
+ u8 jpeg_hdr[JPEG_HDR_SZ];
+};
+enum sensors {
SENSOR_ADCM1700,
SENSOR_GC0307,
SENSOR_HV7131R,
@@ -81,10 +85,6 @@ enum {
SENSOR_PO2030N,
SENSOR_SOI768,
SENSOR_SP80708,
-} sensors;
- u8 i2c_addr;
-
- u8 jpeg_hdr[JPEG_HDR_SZ];
};
/* V4L2 controls supported by the driver */
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index 37cee5e063cfb..c9f367a5dbd1d 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -49,19 +49,17 @@ struct sd {
u8 do_ctrl;
u8 sensor;
-enum {
+ u8 type;
+#define Generic 0
+#define Creative_live_motion 1
+};
+enum sensors {
SENSOR_ICX098BQ,
SENSOR_LZ24BP,
SENSOR_MI0360,
SENSOR_MT9V111,
SENSOR_OV7660,
SENSOR_OV9630,
-} sensors;
- u8 type;
-#define Generic 0
-#define Creative_live_motion 1
-
- u8 jpeg_hdr[JPEG_HDR_SZ];
};
static int sd_setexpo(struct gspca_dev *gspca_dev, __s32 val);
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 2a0f12d55e48a..3b3b983f2b9d8 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -55,12 +55,12 @@ struct sd {
u8 effect;
u8 sensor;
-enum {
+};
+enum sensors {
SENSOR_OM6802,
SENSOR_OTHER,
SENSOR_TAS5130A,
SENSOR_LT168G, /* must verify if this is the actual model */
-} sensors;
};
/* V4L2 controls supported by the driver */
--
GitLab
From 30d4554a02d3ad6f9928767c9f98214775f4dcb2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 06:47:35 -0300
Subject: [PATCH 428/863] V4L/DVB: gspca - main: Version change
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/gspca.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index d951b0f0e0531..0004469691cc5 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -55,7 +55,7 @@ MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>");
MODULE_DESCRIPTION("GSPCA USB Camera Driver");
MODULE_LICENSE("GPL");
-#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 9, 0)
+#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 10, 0)
#ifdef GSPCA_DEBUG
int gspca_debug = D_ERR | D_PROBE;
--
GitLab
From 4663117bbaa27a3fdaff9422f09c64e04ce82694 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 06:50:31 -0300
Subject: [PATCH 429/863] V4L/DVB: gspca - sq930x: Bad init sequence for sensor
mt9v111
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The start_1 exchange must be done by (reg, val) * 5 and not 8.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/sq930x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index c9f367a5dbd1d..8032190cd12a7 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -1111,7 +1111,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
ARRAY_SIZE(mt9v111_init_2));
ucbus_write(gspca_dev, mt9v111_start_1,
ARRAY_SIZE(mt9v111_start_1),
- 8);
+ 5);
i2c_write(sd, mt9v111_init_3,
ARRAY_SIZE(mt9v111_init_3));
i2c_write(sd, mt9v111_init_4,
--
GitLab
From b3c0af6e1f870dc1ade19382177f931f47499d86 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 06:58:18 -0300
Subject: [PATCH 430/863] V4L/DVB: gspca - sq930x: Change the gain value for
Micron sensors
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The bit 7 of the sensor gain register multiplies the 7bits value by two.
It is now always set with half the user gain value.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/sq930x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index 8032190cd12a7..04516b42283a8 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -862,7 +862,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
buf[i++] = 0x35; /* reg = global gain */
buf[i++] = 0x00; /* val H */
buf[i++] = sensor->i2c_dum;
- buf[i++] = sd->gain; /* val L */
+ buf[i++] = 0x80 + sd->gain / 2; /* val L */
buf[i++] = 0x00;
buf[i++] = 0x00;
buf[i++] = 0x00;
--
GitLab
From d6f5bd6d197cb91de296632c4667fcce74e4f5fb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 07:09:32 -0300
Subject: [PATCH 431/863] V4L/DVB: gspca - sq930x: Change the default values of
gain and exposure
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/sq930x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index 04516b42283a8..cec3dafd2f55d 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -76,7 +76,7 @@ static const struct ctrl sd_ctrls[] = {
.minimum = 0x0001,
.maximum = 0x0fff,
.step = 1,
-#define EXPO_DEF 0x027d
+#define EXPO_DEF 0x0356
.default_value = EXPO_DEF,
},
.set = sd_setexpo,
@@ -90,7 +90,7 @@ static const struct ctrl sd_ctrls[] = {
.minimum = 0x01,
.maximum = 0xff,
.step = 1,
-#define GAIN_DEF 0x61
+#define GAIN_DEF 0x8d
.default_value = GAIN_DEF,
},
.set = sd_setgain,
--
GitLab
From 82d2c7aa85e0c7902cd309acafa375b61e147ce6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 07:23:00 -0300
Subject: [PATCH 432/863] V4L/DVB: gspca - sq930x: Change image format to Bayer
mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The JPEG format did not work fine. The Bayer format offers correct VGA (640x480)
resolution, but bad QQVGA (160x120). This last resolution is removed.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/sq930x.c | 312 ++++++-----------------------
1 file changed, 56 insertions(+), 256 deletions(-)
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index cec3dafd2f55d..4b50aa151f5c8 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -23,7 +23,6 @@
#define MODULE_NAME "sq930x"
#include "gspca.h"
-#include "jpeg.h"
MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>\n"
"Gerard Klaver <gerard at gkall dot hobby dot nl\n"
@@ -31,8 +30,6 @@ MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>\n"
MODULE_DESCRIPTION("GSPCA/SQ930x USB Camera Driver");
MODULE_LICENSE("GPL");
-#define BULK_TRANSFER_LEN 5128
-
/* Structure to hold all of our device specific stuff */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
@@ -40,14 +37,8 @@ struct sd {
u16 expo;
u8 gain;
- u8 quality; /* webcam quality 0..3 */
-#define QUALITY_DEF 1
-
- u8 gpio[2];
-
- u8 eof_len;
u8 do_ctrl;
-
+ u8 gpio[2];
u8 sensor;
u8 type;
#define Generic 0
@@ -99,30 +90,18 @@ static const struct ctrl sd_ctrls[] = {
};
static struct v4l2_pix_format vga_mode[] = {
- {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
- .bytesperline = 160,
- .sizeimage = 160 * 120 * 5 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 0},
- {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ {320, 240, V4L2_PIX_FMT_SRGGB8, V4L2_FIELD_NONE,
.bytesperline = 320,
- .sizeimage = 320 * 240 * 4 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 1},
- {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .sizeimage = 320 * 240,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ {640, 480, V4L2_PIX_FMT_SRGGB8, V4L2_FIELD_NONE,
.bytesperline = 640,
- .sizeimage = 640 * 480 * 3 / 8 + 590,
- .colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 2},
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
};
-/* JPEG quality indexed by webcam quality */
-#define QUAL_0 90
-#define QUAL_1 85
-#define QUAL_2 75
-#define QUAL_3 70
-static const u8 quality_tb[4] = { QUAL_0, QUAL_1, QUAL_2, QUAL_3 };
-
/* sq930x registers */
#define SQ930_CTRL_UCBUS_IO 0x0001
#define SQ930_CTRL_I2C_IO 0x0002
@@ -344,75 +323,54 @@ static const struct ucbus_write_cmd ov9630_start_0[] = {
static const struct cap_s {
u8 cc_sizeid;
u8 cc_bytes[32];
-} capconfig[4][3] = {
+} capconfig[4][2] = {
[SENSOR_ICX098BQ] = {
- {0, /* JPEG, 160x120 */
+ {2, /* Bayer 320x240 */
+ {0x05, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
+ 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+ {4, /* Bayer 640x480 */
{0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41,
- 0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {2, /* JPEG, 320x240 */
- {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
- 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {4, /* JPEG, 640x480 */
- {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
- 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
},
[SENSOR_LZ24BP] = {
- {0, /* JPEG, 160x120 */
- {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41,
- 0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {2, /* JPEG, 320x240 */
+ {2, /* Bayer 320x240 */
+ {0x05, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee,
+ 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+ {4, /* Bayer 640x480 */
{0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee,
0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
- 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {4, /* JPEG, 640x480 */
- {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
- 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
},
[SENSOR_MI0360] = {
- {0, /* JPEG, 160x120 */
- {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b,
- 0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f,
- 0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} },
- {2, /* JPEG, 320x240 */
+ {2, /* Bayer 320x240 */
+ {0x05, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
+ 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+ {4, /* Bayer 640x480 */
{0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
-/*fixme 03 e3 */
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
- 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {4, /* JPEG, 640x480 */
- {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe3,
0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
- 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
},
[SENSOR_MT9V111] = {
- {0, /* JPEG, 160x120 */
- {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b,
- 0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f,
- 0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} },
- {2, /* JPEG, 320x240 */
- {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3,
- 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f,
- 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} },
- {4, /* JPEG, 640x480 */
- {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3,
+ {2, /* Bayer 320x240 */
+ {0x05, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
+ 0x01, 0x01, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
+ {4, /* Bayer 640x480 */
+ {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1,
0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8,
- 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f,
- 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} },
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} },
},
};
@@ -887,10 +845,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
cam->nmodes = ARRAY_SIZE(vga_mode);
cam->bulk = 1;
- cam->bulk_size = BULK_TRANSFER_LEN;
-/* cam->bulk_nurbs = 2; fixme: if no setexpo sync */
- sd->quality = QUALITY_DEF;
sd->gain = GAIN_DEF;
sd->expo = EXPO_DEF;
@@ -943,13 +898,10 @@ static int sd_init(struct gspca_dev *gspca_dev)
if (sd->sensor == SENSOR_MI0360) {
/* no sensor probe for icam tracer */
- if (gspca_dev->usb_buf[5] == 0xf6) { /* if CMOS */
+ if (gspca_dev->usb_buf[5] == 0xf6) /* if CMOS */
sd->sensor = SENSOR_ICX098BQ;
- gspca_dev->cam.cam_mode = &vga_mode[1];
- gspca_dev->cam.nmodes = 1; /* only 320x240 */
- } else {
+ else
cmos_probe(gspca_dev);
- }
}
PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name);
@@ -958,45 +910,17 @@ static int sd_init(struct gspca_dev *gspca_dev)
return gspca_dev->usb_err;
}
-/* special function to create the quantization tables of the JPEG header */
-static void sd_jpeg_set_qual(u8 *jpeg_hdr,
- int quality)
-{
- int i, sc1, sc2;
-
- quality = quality_tb[quality]; /* convert to JPEG quality */
-/*
- * approximative qualities for Y and U/V:
- * quant = 0:94%/91% 1:91%/87% 2:82%/73% 3:69%/56%
- * should have:
- * quant = 0:94%/91% 1:91%/87.5% 2:81.5%/72% 3:69%/54.5%
- */
- sc1 = 200 - quality * 2;
- quality = quality * 7 / 5 - 40; /* UV quality */
- sc2 = 200 - quality * 2;
- for (i = 0; i < 64; i++) {
- jpeg_hdr[JPEG_QT0_OFFSET + i] =
- (jpeg_head[JPEG_QT0_OFFSET + i] * sc1 + 50) / 100;
- jpeg_hdr[JPEG_QT1_OFFSET + i] =
- (jpeg_head[JPEG_QT1_OFFSET + i] * sc2 + 50) / 100;
- }
-}
-
/* send the start/stop commands to the webcam */
static void send_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
const struct cap_s *cap;
- int mode, quality;
+ int mode;
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
cap = &capconfig[sd->sensor][mode];
- quality = sd->quality;
- reg_wb(gspca_dev, (quality << 12)
- | 0x0a00 /* 900 for Bayer */
- | SQ930_CTRL_CAP_START,
- 0x0500 /* a00 for Bayer */
- | cap->cc_sizeid,
+ reg_wb(gspca_dev, 0x0900 | SQ930_CTRL_CAP_START,
+ 0x0a00 | cap->cc_sizeid,
cap->cc_bytes, 32);
};
static void send_stop(struct gspca_dev *gspca_dev)
@@ -1011,6 +935,7 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev)
gspca_dev->cam.bulk_nurbs = 1; /* there must be one URB only */
sd->do_ctrl = 0;
+ gspca_dev->cam.bulk_size = gspca_dev->width * gspca_dev->height + 8;
return 0;
}
@@ -1020,11 +945,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
struct sd *sd = (struct sd *) gspca_dev;
int mode;
- /* initialize the JPEG header */
- jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
- 0x21); /* JPEG 422 */
- sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality);
-
bridge_init(sd);
global_init(sd, 0);
msleep(100);
@@ -1069,7 +989,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
ARRAY_SIZE(lz24bp_start_2),
6);
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
- lz24bp_ppl(sd, mode == 2 ? 0x0564 : 0x0310);
+ lz24bp_ppl(sd, mode == 1 ? 0x0564 : 0x0310);
msleep(10);
break;
case SENSOR_MI0360:
@@ -1123,8 +1043,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
out:
msleep(1000);
- sd->eof_len = 0; /* init packet scan */
-
if (sd->sensor == SENSOR_MT9V111)
gpio_set(sd, SQ930_GPIO_DFL_LED, SQ930_GPIO_DFL_LED);
@@ -1164,94 +1082,17 @@ static void sd_dq_callback(struct gspca_dev *gspca_dev)
msleep(100);
}
-/* move a packet adding 0x00 after 0xff */
-static void add_packet(struct gspca_dev *gspca_dev,
- u8 *data,
- int len)
-{
- int i;
-
- i = 0;
- do {
- if (data[i] == 0xff) {
- gspca_frame_add(gspca_dev, INTER_PACKET,
- data, i + 1);
- len -= i;
- data += i;
- *data = 0x00;
- i = 0;
- }
- } while (++i < len);
- gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
-}
-
-/* end a frame and start a new one */
-static void eof_sof(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- static const u8 ffd9[] = {0xff, 0xd9};
-
- /* if control set, stop bulk transfer */
- if (sd->do_ctrl
- && gspca_dev->last_packet_type == INTER_PACKET)
- gspca_dev->cam.bulk_nurbs = 0;
- gspca_frame_add(gspca_dev, LAST_PACKET,
- ffd9, 2);
- gspca_frame_add(gspca_dev, FIRST_PACKET,
- sd->jpeg_hdr, JPEG_HDR_SZ);
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
- u8 *p;
- int l;
-
- len -= 8; /* ignore last 8 bytes (00 00 55 aa 55 aa 00 00) */
-
- /*
- * the end/start of frame is indicated by
- * 0x00 * 16 - 0xab * 8
- * aligned on 8 bytes boundary
- */
- if (sd->eof_len != 0) { /* if 'abababab' in previous pkt */
- if (*((u32 *) data) == 0xabababab) {
- /*fixme: should remove previous 0000ababab*/
- eof_sof(gspca_dev);
- data += 4;
- len -= 4;
- }
- sd->eof_len = 0;
- }
- p = data;
- l = len;
- for (;;) {
- if (*((u32 *) p) == 0xabababab) {
- if (l < 8) { /* (may be 4 only) */
- sd->eof_len = 1;
- break;
- }
- if (*((u32 *) p + 1) == 0xabababab) {
- add_packet(gspca_dev, data, p - data - 16);
- /* remove previous zeros */
- eof_sof(gspca_dev);
- p += 8;
- l -= 8;
- if (l <= 0)
- return;
- len = l;
- data = p;
- continue;
- }
- }
- p += 4;
- l -= 4;
- if (l <= 0)
- break;
- }
- add_packet(gspca_dev, data, len);
+
+ if (sd->do_ctrl)
+ gspca_dev->cam.bulk_nurbs = 0;
+ gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len - 8);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
}
static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
@@ -1289,45 +1130,6 @@ static int sd_getexpo(struct gspca_dev *gspca_dev, __s32 *val)
return 0;
}
-static int sd_set_jcomp(struct gspca_dev *gspca_dev,
- struct v4l2_jpegcompression *jcomp)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- int quality;
-
- if (jcomp->quality >= (QUAL_0 + QUAL_1) / 2)
- quality = 0;
- else if (jcomp->quality >= (QUAL_1 + QUAL_2) / 2)
- quality = 1;
- else if (jcomp->quality >= (QUAL_2 + QUAL_3) / 2)
- quality = 2;
- else
- quality = 3;
-
- if (quality != sd->quality) {
- sd->quality = quality;
- if (gspca_dev->streaming) {
- send_stop(gspca_dev);
- sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality);
- msleep(70);
- send_start(gspca_dev);
- }
- }
- return gspca_dev->usb_err;
-}
-
-static int sd_get_jcomp(struct gspca_dev *gspca_dev,
- struct v4l2_jpegcompression *jcomp)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- memset(jcomp, 0, sizeof *jcomp);
- jcomp->quality = quality_tb[sd->quality];
- jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT
- | V4L2_JPEG_MARKER_DQT;
- return 0;
-}
-
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -1340,8 +1142,6 @@ static const struct sd_desc sd_desc = {
.stopN = sd_stopN,
.pkt_scan = sd_pkt_scan,
.dq_callback = sd_dq_callback,
- .get_jcomp = sd_get_jcomp,
- .set_jcomp = sd_set_jcomp,
};
/* Table of supported USB devices */
--
GitLab
From 585d48812c66f3045b6cb51539bafe10b109882f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 07:25:44 -0300
Subject: [PATCH 433/863] V4L/DVB: gspca - sq930x: Change the horizontal
blanking of sensor mt9v111
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/sq930x.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index 4b50aa151f5c8..fceed19b330a5 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -307,7 +307,8 @@ static const struct i2c_write_cmd mt9v111_init_3[] = {
{0x62, 0x0405},
};
static const struct i2c_write_cmd mt9v111_init_4[] = {
- {0x05, 0x00ce}, /* horizontal blanking */
+/* {0x05, 0x00ce}, */
+ {0x05, 0x005d}, /* horizontal blanking */
};
static const struct ucbus_write_cmd ov7660_start_0[] = {
--
GitLab
From 6e80cc51b4419ca0f8162024ee2497d7ec8ba31c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 07:27:13 -0300
Subject: [PATCH 434/863] V4L/DVB: gspca - sq930x: Cleanup source, add comments
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/sq930x.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index fceed19b330a5..7ae6522d4edf0 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -48,7 +48,7 @@ enum sensors {
SENSOR_ICX098BQ,
SENSOR_LZ24BP,
SENSOR_MI0360,
- SENSOR_MT9V111,
+ SENSOR_MT9V111, /* = MI360SOC */
SENSOR_OV7660,
SENSOR_OV9630,
};
@@ -279,7 +279,7 @@ static const struct i2c_write_cmd mt9v111_init_0[] = {
{0x01, 0x0001}, /* select IFP/SOC registers */
{0x06, 0x300c}, /* operating mode control */
{0x08, 0xcc00}, /* output format control (RGB) */
- {0x01, 0x0004}, /* select core registers */
+ {0x01, 0x0004}, /* select sensor core registers */
};
static const struct i2c_write_cmd mt9v111_init_1[] = {
{0x03, 0x01e5}, /* window height */
@@ -321,6 +321,7 @@ static const struct ucbus_write_cmd ov9630_start_0[] = {
{0xf334, 0x3e}, {0xf335, 0xf8}, {0xf33f, 0x03}
};
+/* start parameters indexed by [sensor][mode] */
static const struct cap_s {
u8 cc_sizeid;
u8 cc_bytes[32];
@@ -923,11 +924,12 @@ static void send_start(struct gspca_dev *gspca_dev)
reg_wb(gspca_dev, 0x0900 | SQ930_CTRL_CAP_START,
0x0a00 | cap->cc_sizeid,
cap->cc_bytes, 32);
-};
+}
+
static void send_stop(struct gspca_dev *gspca_dev)
{
reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0);
-};
+}
/* function called at start time before URB creation */
static int sd_isoc_init(struct gspca_dev *gspca_dev)
@@ -1014,7 +1016,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
/* 1st start */
send_start(gspca_dev);
msleep(60);
- reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0x0000);
+ send_stop(gspca_dev);
i2c_write(sd,
mi0360_start_4, ARRAY_SIZE(mi0360_start_4));
--
GitLab
From 486cb2d5b01e77fb3cd93c4c0810100d59a45c8b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 07:53:57 -0300
Subject: [PATCH 435/863] V4L/DVB: gspca - vc032x: Add more controls for poxxxx
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The added controls are exposure, gain, autogain and backlight compensation.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/vc032x.c | 306 +++++++++++++++++++++++++----
1 file changed, 272 insertions(+), 34 deletions(-)
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 031266a4081bf..d450a95480bda 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -39,6 +39,10 @@ struct sd {
u8 vflip;
u8 lightfreq;
s8 sharpness;
+ u16 exposure;
+ u8 gain;
+ u8 autogain;
+ u8 backlight;
u8 image_offset;
@@ -77,6 +81,14 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setbacklight(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbacklight(struct gspca_dev *gspca_dev, __s32 *val);
static const struct ctrl sd_ctrls[] = {
#define BRIGHTNESS_IDX 0
@@ -185,6 +197,66 @@ static const struct ctrl sd_ctrls[] = {
.set = sd_setsharpness,
.get = sd_getsharpness,
},
+#define GAIN_IDX 7
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 78,
+ .step = 1,
+#define GAIN_DEF 0
+ .default_value = GAIN_DEF,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+#define EXPOSURE_IDX 8
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+#define EXPOSURE_DEF 450
+ .minimum = 0,
+ .maximum = 4095,
+ .step = 1,
+ .default_value = EXPOSURE_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+#define AUTOGAIN_IDX 9
+ {
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Automatic Gain and Exposure",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTOGAIN_DEF 1
+ .default_value = AUTOGAIN_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+#define BACKLIGHT_IDX 10
+ {
+ {
+ .id = V4L2_CID_BACKLIGHT_COMPENSATION,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Backlight Compensation",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+#define BACKLIGHT_DEF 15
+ .default_value = BACKLIGHT_DEF,
+ },
+ .set = sd_setbacklight,
+ .get = sd_getbacklight,
+ },
};
/* table of the disabled controls */
@@ -192,33 +264,51 @@ static u32 ctrl_dis[] = {
/* SENSOR_HV7131R 0 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
- | (1 << SHARPNESS_IDX),
+ | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_MI0360 1 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
- | (1 << SHARPNESS_IDX),
+ | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_MI1310_SOC 2 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_MI1320 3 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_MI1320_SOC 4 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_OV7660 5 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX),
+ | (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_OV7670 6 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << SHARPNESS_IDX),
+ | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_PO1200 7 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
- | (1 << LIGHTFREQ_IDX),
+ | (1 << LIGHTFREQ_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_PO3130NC 8 */
(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
- | (1 << SHARPNESS_IDX),
+ | (1 << SHARPNESS_IDX)
+ | (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
+ | (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
/* SENSOR_POxxxx 9 */
(1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX),
};
@@ -2825,7 +2915,9 @@ static const u8 poxxxx_init_common[][4] = {
{0x00, 0x1e, 0xc6, 0xaa},
{0x00, 0x00, 0x40, 0xdd},
{0x00, 0x1d, 0x05, 0xaa},
-
+ {}
+};
+static const u8 poxxxx_gamma[][4] = {
{0x00, 0xd6, 0x22, 0xaa}, /* gamma 0 */
{0x00, 0x73, 0x00, 0xaa},
{0x00, 0x74, 0x0a, 0xaa},
@@ -2867,19 +2959,9 @@ static const u8 poxxxx_init_common[][4] = {
{0x00, 0x7c, 0xba, 0xaa},
{0x00, 0x7d, 0xd4, 0xaa},
{0x00, 0x7e, 0xea, 0xaa},
-
- {0x00, 0xaa, 0xff, 0xaa}, /* back light comp */
- {0x00, 0xc4, 0x03, 0xaa},
- {0x00, 0xc5, 0x19, 0xaa},
- {0x00, 0xc6, 0x03, 0xaa},
- {0x00, 0xc7, 0x91, 0xaa},
- {0x00, 0xc8, 0x01, 0xaa},
- {0x00, 0xc9, 0xdd, 0xaa},
- {0x00, 0xca, 0x02, 0xaa},
- {0x00, 0xcb, 0x37, 0xaa},
-
-/* read d1 */
- {0x00, 0xd1, 0x3c, 0xaa},
+ {}
+};
+static const u8 poxxxx_init_start_3[][4] = {
{0x00, 0xb8, 0x28, 0xaa},
{0x00, 0xb9, 0x1e, 0xaa},
{0x00, 0xb6, 0x14, 0xaa},
@@ -2959,9 +3041,6 @@ static const u8 poxxxx_init_end_1[][4] = {
{0x00, 0xb3, 0x08, 0xaa},
{0x00, 0xb4, 0x0b, 0xaa},
{0x00, 0xb5, 0x0d, 0xaa},
- {0x00, 0x59, 0x7e, 0xaa}, /* sharpness */
- {0x00, 0x16, 0x00, 0xaa}, /* white balance */
- {0x00, 0x18, 0x00, 0xaa},
{}
};
static const u8 poxxxx_init_end_2[][4] = {
@@ -3409,6 +3488,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
sd->vflip = VFLIP_DEF;
sd->lightfreq = FREQ_DEF;
sd->sharpness = SHARPNESS_DEF;
+ sd->gain = GAIN_DEF;
+ sd->exposure = EXPOSURE_DEF;
+ sd->autogain = AUTOGAIN_DEF;
+ sd->backlight = BACKLIGHT_DEF;
gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
@@ -3551,6 +3634,82 @@ static void setsharpness(struct gspca_dev *gspca_dev)
break;
}
}
+static void setgain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (gspca_dev->ctrl_dis & (1 << GAIN_IDX))
+ return;
+ i2c_write(gspca_dev, 0x15, &sd->gain, 1);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 data;
+
+ if (gspca_dev->ctrl_dis & (1 << EXPOSURE_IDX))
+ return;
+ data = sd->exposure >> 8;
+ i2c_write(gspca_dev, 0x1a, &data, 1);
+ data = sd->exposure;
+ i2c_write(gspca_dev, 0x1b, &data, 1);
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ static const u8 data[2] = {0x28, 0x3c};
+
+ if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+ return;
+ i2c_write(gspca_dev, 0xd1, &data[sd->autogain], 1);
+}
+
+static void setgamma(struct gspca_dev *gspca_dev)
+{
+/*fixme:to do */
+ usb_exchange(gspca_dev, poxxxx_gamma);
+}
+
+static void setbacklight(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u16 v;
+ u8 data;
+
+ data = (sd->backlight << 4) | 0x0f;
+ i2c_write(gspca_dev, 0xaa, &data, 1);
+ v = 613 + 12 * sd->backlight;
+ data = v >> 8;
+ i2c_write(gspca_dev, 0xc4, &data, 1);
+ data = v;
+ i2c_write(gspca_dev, 0xc5, &data, 1);
+ v = 1093 - 12 * sd->backlight;
+ data = v >> 8;
+ i2c_write(gspca_dev, 0xc6, &data, 1);
+ data = v;
+ i2c_write(gspca_dev, 0xc7, &data, 1);
+ v = 342 + 9 * sd->backlight;
+ data = v >> 8;
+ i2c_write(gspca_dev, 0xc8, &data, 1);
+ data = v;
+ i2c_write(gspca_dev, 0xc9, &data, 1);
+ v = 702 - 9 * sd->backlight;
+ data = v >> 8;
+ i2c_write(gspca_dev, 0xca, &data, 1);
+ data = v;
+ i2c_write(gspca_dev, 0xcb, &data, 1);
+}
+
+static void setwb(struct gspca_dev *gspca_dev)
+{
+/*fixme:to do - valid when reg d1 = 0x1c - (reg16 + reg15 = 0xa3)*/
+ static const u8 data[2] = {0x00, 0x00};
+
+ i2c_write(gspca_dev, 0x16, &data[0], 1);
+ i2c_write(gspca_dev, 0x18, &data[1], 1);
+}
static int sd_start(struct gspca_dev *gspca_dev)
{
@@ -3662,6 +3821,16 @@ static int sd_start(struct gspca_dev *gspca_dev)
default:
/* case SENSOR_POxxxx: */
usb_exchange(gspca_dev, poxxxx_init_common);
+ setgamma(gspca_dev);
+ setbacklight(gspca_dev);
+ setbrightness(gspca_dev);
+ setcontrast(gspca_dev);
+ setcolors(gspca_dev);
+ setsharpness(gspca_dev);
+ setautogain(gspca_dev);
+ setexposure(gspca_dev);
+ setgain(gspca_dev);
+ usb_exchange(gspca_dev, poxxxx_init_start_3);
if (mode)
init = poxxxx_initQVGA;
else
@@ -3693,7 +3862,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
break;
}
msleep(100);
- setsharpness(gspca_dev);
sethvflip(gspca_dev);
setlightfreq(gspca_dev);
}
@@ -3704,14 +3872,10 @@ static int sd_start(struct gspca_dev *gspca_dev)
reg_w(gspca_dev, 0xa0, 0x0000, 0xbfff);
break;
case SENSOR_POxxxx:
- setcolors(gspca_dev);
- setbrightness(gspca_dev);
- setcontrast(gspca_dev);
-
- /* led on */
- msleep(80);
- reg_w(gspca_dev, 0x89, 0xffff, 0xfdff);
usb_exchange(gspca_dev, poxxxx_init_end_2);
+ setwb(gspca_dev);
+ msleep(80); /* led on */
+ reg_w(gspca_dev, 0x89, 0xffff, 0xfdff);
break;
}
return gspca_dev->usb_err;
@@ -3911,6 +4075,80 @@ static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
return 0;
}
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ setgain(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->gain;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->autogain = val;
+ if (gspca_dev->streaming)
+ setautogain(gspca_dev);
+
+ return gspca_dev->usb_err;
+}
+
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->autogain;
+ return 0;
+}
+
+static int sd_setbacklight(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->backlight = val;
+ if (gspca_dev->streaming)
+ setbacklight(gspca_dev);
+
+ return gspca_dev->usb_err;
+}
+
+static int sd_getbacklight(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->backlight;
+ return 0;
+}
+
static int sd_querymenu(struct gspca_dev *gspca_dev,
struct v4l2_querymenu *menu)
{
--
GitLab
From bb44f5682b7b7829cf010d6dad9c75f58d1f767b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Mon, 26 Jul 2010 07:59:23 -0300
Subject: [PATCH 436/863] V4L/DVB: gspca - vc032x: Do sensor probe at resume
time
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/vc032x.c | 60 ++++++++++++++++--------------
1 file changed, 32 insertions(+), 28 deletions(-)
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index d450a95480bda..48a8af3078a3d 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -3389,6 +3389,33 @@ static void usb_exchange(struct gspca_dev *gspca_dev,
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->bridge = id->driver_info >> 8;
+ sd->flags = id->driver_info & 0xff;
+
+ if (id->idVendor == 0x046d &&
+ (id->idProduct == 0x0892 || id->idProduct == 0x0896))
+ sd->sensor = SENSOR_POxxxx; /* no probe */
+
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->colors = COLOR_DEF;
+ sd->hflip = HFLIP_DEF;
+ sd->vflip = VFLIP_DEF;
+ sd->lightfreq = FREQ_DEF;
+ sd->sharpness = SHARPNESS_DEF;
+ sd->gain = GAIN_DEF;
+ sd->exposure = EXPOSURE_DEF;
+ sd->autogain = AUTOGAIN_DEF;
+ sd->backlight = BACKLIGHT_DEF;
+
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
@@ -3406,14 +3433,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
128, /* POxxxx 9 */
};
- cam = &gspca_dev->cam;
- sd->bridge = id->driver_info >> 8;
- sd->flags = id->driver_info & 0xff;
- if (id->idVendor == 0x046d &&
- (id->idProduct == 0x0892 || id->idProduct == 0x0896))
- sensor = SENSOR_POxxxx;
- else
+ if (sd->sensor != SENSOR_POxxxx)
sensor = vc032x_probe_sensor(gspca_dev);
+ else
+ sensor = sd->sensor;
+
switch (sensor) {
case -1:
PDEBUG(D_PROBE, "Unknown sensor...");
@@ -3452,6 +3476,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
}
sd->sensor = sensor;
+ cam = &gspca_dev->cam;
if (sd->bridge == BRIDGE_VC0321) {
cam->cam_mode = vc0321_mode;
cam->nmodes = ARRAY_SIZE(vc0321_mode);
@@ -3480,32 +3505,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
}
}
cam->npkt = npkt[sd->sensor];
-
- sd->brightness = BRIGHTNESS_DEF;
- sd->contrast = CONTRAST_DEF;
- sd->colors = COLOR_DEF;
- sd->hflip = HFLIP_DEF;
- sd->vflip = VFLIP_DEF;
- sd->lightfreq = FREQ_DEF;
- sd->sharpness = SHARPNESS_DEF;
- sd->gain = GAIN_DEF;
- sd->exposure = EXPOSURE_DEF;
- sd->autogain = AUTOGAIN_DEF;
- sd->backlight = BACKLIGHT_DEF;
-
gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
if (sd->sensor == SENSOR_OV7670)
sd->flags |= FL_HFLIP | FL_VFLIP;
- return 0;
-}
-
-/* this function is called at probe and resume time */
-static int sd_init(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
if (sd->bridge == BRIDGE_VC0321) {
reg_r(gspca_dev, 0x8a, 0, 3);
reg_w(gspca_dev, 0x87, 0x00, 0x0f0f);
--
GitLab
From 3d217c8656842c77d6f33329a034102157363c8d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 27 Jul 2010 05:34:49 -0300
Subject: [PATCH 437/863] V4L/DVB: gspca - vc032x: Force main register write at
probe time (poxxxx)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On laptops, the webcam sometimes disconnects when writing the first main
register (b300). This patch prevents the creation of a new /dev/video<n>
on streaming start.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/vc032x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 48a8af3078a3d..b16fd47e8ced1 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -3520,8 +3520,8 @@ static int sd_init(struct gspca_dev *gspca_dev)
if (gspca_dev->usb_buf[0] != 0) {
reg_w(gspca_dev, 0xa0, 0x26, 0xb300);
reg_w(gspca_dev, 0xa0, 0x04, 0xb300);
- reg_w(gspca_dev, 0xa0, 0x00, 0xb300);
}
+ reg_w(gspca_dev, 0xa0, 0x00, 0xb300);
}
}
return gspca_dev->usb_err;
--
GitLab
From f4acb3c4ccca74f5448354308f917e87ce83505a Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 18 Jul 2010 16:48:47 -0300
Subject: [PATCH 438/863] V4L/DVB: cx23885: Return -ENXIO on slave nack
Documentation/i2c/fault-codes says that i2c adapter drivers should
return -ENXIO when no slave acks an address byte.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index d4746e0645169..154c914ae16fe 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -99,7 +99,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
if (!i2c_wait_done(i2c_adap))
return -EIO;
if (!i2c_slave_did_ack(i2c_adap))
- return -EIO;
+ return -ENXIO;
dprintk(1, "%s() returns 0\n", __func__);
return 0;
@@ -185,7 +185,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
if (!i2c_wait_done(i2c_adap))
return -EIO;
if (!i2c_slave_did_ack(i2c_adap))
- return -EIO;
+ return -ENXIO;
dprintk(1, "%s() returns 0\n", __func__);
--
GitLab
From 44835f197bf1e3f57464f23dfb239fef06cf89be Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 18 Jul 2010 16:52:05 -0300
Subject: [PATCH 439/863] V4L/DVB: cx23885: Check for slave nack on all
transactions
Don't just check for nacks on zero-length transactions. Check on
other transactions too.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-i2c.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 154c914ae16fe..afb8d6f91d142 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -125,6 +125,10 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
goto err;
if (retval == 0)
goto eio;
+ if (!i2c_slave_did_ack(i2c_adap)) {
+ retval = -ENXIO;
+ goto err;
+ }
if (i2c_debug) {
printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
if (!(ctrl & I2C_NOSTOP))
@@ -214,6 +218,10 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
goto err;
if (retval == 0)
goto eio;
+ if (cnt == 0 && !i2c_slave_did_ack(i2c_adap)) {
+ retval = -ENXIO;
+ goto err;
+ }
msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
if (i2c_debug) {
dprintk(1, " %02x", msg->buf[cnt]);
--
GitLab
From 18a87becf85d50e7f3d547f1b7a75108b151374d Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 18 Jul 2010 17:05:17 -0300
Subject: [PATCH 440/863] V4L/DVB: cx23885: i2c_wait_done returns 0 or 1, don't
check for < 0 return value
Function i2c_wait_done() never returns negative values, so there is no
point in checking for them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-i2c.c | 15 +++------------
1 file changed, 3 insertions(+), 12 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index afb8d6f91d142..1a391486e551a 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -120,10 +120,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
cx_write(bus->reg_wdata, wdata);
cx_write(bus->reg_ctrl, ctrl);
- retval = i2c_wait_done(i2c_adap);
- if (retval < 0)
- goto err;
- if (retval == 0)
+ if (!i2c_wait_done(i2c_adap))
goto eio;
if (!i2c_slave_did_ack(i2c_adap)) {
retval = -ENXIO;
@@ -149,10 +146,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
cx_write(bus->reg_wdata, wdata);
cx_write(bus->reg_ctrl, ctrl);
- retval = i2c_wait_done(i2c_adap);
- if (retval < 0)
- goto err;
- if (retval == 0)
+ if (!i2c_wait_done(i2c_adap))
goto eio;
if (i2c_debug) {
dprintk(1, " %02x", msg->buf[cnt]);
@@ -213,10 +207,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
cx_write(bus->reg_addr, msg->addr << 25);
cx_write(bus->reg_ctrl, ctrl);
- retval = i2c_wait_done(i2c_adap);
- if (retval < 0)
- goto err;
- if (retval == 0)
+ if (!i2c_wait_done(i2c_adap))
goto eio;
if (cnt == 0 && !i2c_slave_did_ack(i2c_adap)) {
retval = -ENXIO;
--
GitLab
From 5f272644464bfb8cf8cec958cfc06020283c2f14 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 17:16:16 -0300
Subject: [PATCH 441/863] V4L/DVB: cx25840: Make cx25840 i2c register read
transactions atomic
There was a small window between writing the cx25840 register
address over the i2c bus and reading the register contents back from the
cx25840 device that the i2c adapter lock was released. This change ensures the
adapter lock is not released until the register read is done.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx25840/cx25840-core.c | 58 +++++++++++++++-------
1 file changed, 39 insertions(+), 19 deletions(-)
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index bb4872b2ceb0d..4f908fa4da08f 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -80,33 +80,53 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value)
u8 cx25840_read(struct i2c_client * client, u16 addr)
{
- u8 buffer[2];
- buffer[0] = addr >> 8;
- buffer[1] = addr & 0xff;
-
- if (i2c_master_send(client, buffer, 2) < 2)
- return 0;
-
- if (i2c_master_recv(client, buffer, 1) < 1)
+ struct i2c_msg msgs[2];
+ u8 tx_buf[2], rx_buf[1];
+
+ /* Write register address */
+ tx_buf[0] = addr >> 8;
+ tx_buf[1] = addr & 0xff;
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = 2;
+ msgs[0].buf = (char *) tx_buf;
+
+ /* Read data from register */
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = 1;
+ msgs[1].buf = (char *) rx_buf;
+
+ if (i2c_transfer(client->adapter, msgs, 2) < 2)
return 0;
- return buffer[0];
+ return rx_buf[0];
}
u32 cx25840_read4(struct i2c_client * client, u16 addr)
{
- u8 buffer[4];
- buffer[0] = addr >> 8;
- buffer[1] = addr & 0xff;
-
- if (i2c_master_send(client, buffer, 2) < 2)
- return 0;
-
- if (i2c_master_recv(client, buffer, 4) < 4)
+ struct i2c_msg msgs[2];
+ u8 tx_buf[2], rx_buf[4];
+
+ /* Write register address */
+ tx_buf[0] = addr >> 8;
+ tx_buf[1] = addr & 0xff;
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = 2;
+ msgs[0].buf = (char *) tx_buf;
+
+ /* Read data from registers */
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = 4;
+ msgs[1].buf = (char *) rx_buf;
+
+ if (i2c_transfer(client->adapter, msgs, 2) < 2)
return 0;
- return (buffer[3] << 24) | (buffer[2] << 16) |
- (buffer[1] << 8) | buffer[0];
+ return (rx_buf[3] << 24) | (rx_buf[2] << 16) | (rx_buf[1] << 8) |
+ rx_buf[0];
}
int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
--
GitLab
From ebbeb46000676af0772da4b7da22e2aae3889bd0 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 17:35:00 -0300
Subject: [PATCH 442/863] V4L/DVB: cx23885: Add correct detection of the
HVR-1250 model 79501
The offset in the eeprom data for the 79501 version of the HVR-1250 is at 0xc0
vs. the standard 0x80.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-cards.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 2014daedee8b3..29eea8d3613b6 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -626,6 +626,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
case 79101:
/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
ATSC and Basic analog */
+ case 79501:
+ /* WinTV-HVR1250 (PCIe, No IR, half height,
+ ATSC [at least] and Basic analog) */
case 79561:
/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
ATSC and Basic analog */
@@ -1028,6 +1031,13 @@ void cx23885_card_setup(struct cx23885_dev *dev)
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ if (dev->i2c_bus[0].i2c_rc == 0) {
+ if (eeprom[0x80] != 0x84)
+ hauppauge_eeprom(dev, eeprom+0xc0);
+ else
+ hauppauge_eeprom(dev, eeprom+0x80);
+ }
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
--
GitLab
From e9e5cf472751a16ebe80c9a47b512605e3511880 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 18:18:06 -0300
Subject: [PATCH 443/863] V4L/DVB: cx23885: Add a VIDIOC_LOG_STATUS ioctl
function for analog video devices
Add a simple log_status function for raw analog video capture device nodes,
to provide insight into the state of the CX2388[578] A/V decoder core.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-video.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 4e44dcda38756..25194553c5299 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1205,6 +1205,21 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
return 0;
}
+static int vidioc_log_status(struct file *file, void *priv)
+{
+ struct cx23885_fh *fh = priv;
+ struct cx23885_dev *dev = fh->dev;
+
+ printk(KERN_INFO
+ "%s/0: ============ START LOG STATUS ============\n",
+ dev->name);
+ call_all(dev, core, log_status);
+ printk(KERN_INFO
+ "%s/0: ============= END LOG STATUS =============\n",
+ dev->name);
+ return 0;
+}
+
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qctrl)
{
@@ -1410,6 +1425,7 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_enum_input = vidioc_enum_input,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
+ .vidioc_log_status = vidioc_log_status,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
--
GitLab
From 66752f8396f97360cafb226aa1fe230f66785c5a Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 18:51:10 -0300
Subject: [PATCH 444/863] V4L/DVB: v4l2_subdev: Add s_io_pin_config to
v4l2_subdev_core_ops
Add a method to v4l2_sudev_core_ops to allow bridge drivers to
manage what signal pads/functions are routed out to multiplexed IO pins on a
pin by pin basis. The interface also allows specifying initial output settings
for pins and disabling an IO pin altogether.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
include/media/v4l2-subdev.h | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 02c6f4d11ed36..9195ad490ee24 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -90,10 +90,31 @@ struct v4l2_decode_vbi_line {
not yet implemented) since ops provide proper type-checking.
*/
+/* Subdevice external IO pin configuration */
+#define V4L2_SUBDEV_IO_PIN_DISABLE (1 << 0) /* ENABLE assumed */
+#define V4L2_SUBDEV_IO_PIN_OUTPUT (1 << 1)
+#define V4L2_SUBDEV_IO_PIN_INPUT (1 << 2)
+#define V4L2_SUBDEV_IO_PIN_SET_VALUE (1 << 3) /* Set output value */
+#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW (1 << 4) /* ACTIVE HIGH assumed */
+
+struct v4l2_subdev_io_pin_config {
+ u32 flags; /* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */
+ u8 pin; /* Chip external IO pin to configure */
+ u8 function; /* Internal signal pad/function to route to IO pin */
+ u8 value; /* Initial value for pin - e.g. GPIO output value */
+ u8 strength; /* Pin drive strength */
+};
+
/* s_config: if set, then it is always called by the v4l2_i2c_new_subdev*
functions after the v4l2_subdev was registered. It is used to pass
platform data to the subdev which can be used during initialization.
+ s_io_pin_config: configure one or more chip I/O pins for chips that
+ multiplex different internal signal pads out to IO pins. This function
+ takes a pointer to an array of 'n' pin configuration entries, one for
+ each pin being configured. This function could be called at times
+ other than just subdevice initialization.
+
init: initialize the sensor registors to some sort of reasonable default
values. Do not use for new drivers and should be removed in existing
drivers.
@@ -115,6 +136,8 @@ struct v4l2_subdev_core_ops {
int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
int (*log_status)(struct v4l2_subdev *sd);
int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data);
+ int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n,
+ struct v4l2_subdev_io_pin_config *pincfg);
int (*init)(struct v4l2_subdev *sd, u32 val);
int (*load_fw)(struct v4l2_subdev *sd);
int (*reset)(struct v4l2_subdev *sd, u32 val);
--
GitLab
From d06d5777b211112e8355e2f5a700c6a9babfdd6f Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 19:39:54 -0300
Subject: [PATCH 445/863] V4L/DVB: cx25840: Add s_io_pin_config core subdev ops
for the CX2388[578]
Add s_io_pin_config core subdev op for the CX2388[578] AV cores.
This is complete for IR_RX, IR_TX, GPIOs 16,19-23, and IRQ_N.
It likely needs work for the I2S signal direction.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx25840/cx25840-core.c | 153 +++++++++++++++++++++
include/media/cx25840.h | 75 ++++++++++
2 files changed, 228 insertions(+)
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 4f908fa4da08f..46a046d6405ee 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -144,6 +144,158 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp
/* ----------------------------------------------------------------------- */
+static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
+ struct v4l2_subdev_io_pin_config *p)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int i;
+ u32 pin_ctrl;
+ u8 gpio_oe, gpio_data, strength;
+
+ pin_ctrl = cx25840_read4(client, 0x120);
+ gpio_oe = cx25840_read(client, 0x160);
+ gpio_data = cx25840_read(client, 0x164);
+
+ for (i = 0; i < n; i++) {
+ strength = p[i].strength;
+ if (strength > CX25840_PIN_DRIVE_FAST)
+ strength = CX25840_PIN_DRIVE_FAST;
+
+ switch (p[i].pin) {
+ case CX23885_PIN_IRQ_N_GPIO16:
+ if (p[i].function != CX23885_PAD_IRQ_N) {
+ /* GPIO16 */
+ pin_ctrl &= ~(0x1 << 25);
+ } else {
+ /* IRQ_N */
+ if (p[i].flags &
+ (V4L2_SUBDEV_IO_PIN_DISABLE |
+ V4L2_SUBDEV_IO_PIN_INPUT)) {
+ pin_ctrl &= ~(0x1 << 25);
+ } else {
+ pin_ctrl |= (0x1 << 25);
+ }
+ if (p[i].flags &
+ V4L2_SUBDEV_IO_PIN_ACTIVE_LOW) {
+ pin_ctrl &= ~(0x1 << 24);
+ } else {
+ pin_ctrl |= (0x1 << 24);
+ }
+ }
+ break;
+ case CX23885_PIN_IR_RX_GPIO19:
+ if (p[i].function != CX23885_PAD_GPIO19) {
+ /* IR_RX */
+ gpio_oe |= (0x1 << 0);
+ pin_ctrl &= ~(0x3 << 18);
+ pin_ctrl |= (strength << 18);
+ } else {
+ /* GPIO19 */
+ gpio_oe &= ~(0x1 << 0);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 0);
+ gpio_data |= ((p[i].value & 0x1) << 0);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ case CX23885_PIN_IR_TX_GPIO20:
+ if (p[i].function != CX23885_PAD_GPIO20) {
+ /* IR_TX */
+ gpio_oe |= (0x1 << 1);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_DISABLE)
+ pin_ctrl &= ~(0x1 << 10);
+ else
+ pin_ctrl |= (0x1 << 10);
+ pin_ctrl &= ~(0x3 << 18);
+ pin_ctrl |= (strength << 18);
+ } else {
+ /* GPIO20 */
+ gpio_oe &= ~(0x1 << 1);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 1);
+ gpio_data |= ((p[i].value & 0x1) << 1);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ case CX23885_PIN_I2S_SDAT_GPIO21:
+ if (p[i].function != CX23885_PAD_GPIO21) {
+ /* I2S_SDAT */
+ /* TODO: Input or Output config */
+ gpio_oe |= (0x1 << 2);
+ pin_ctrl &= ~(0x3 << 22);
+ pin_ctrl |= (strength << 22);
+ } else {
+ /* GPIO21 */
+ gpio_oe &= ~(0x1 << 2);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 2);
+ gpio_data |= ((p[i].value & 0x1) << 2);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ case CX23885_PIN_I2S_WCLK_GPIO22:
+ if (p[i].function != CX23885_PAD_GPIO22) {
+ /* I2S_WCLK */
+ /* TODO: Input or Output config */
+ gpio_oe |= (0x1 << 3);
+ pin_ctrl &= ~(0x3 << 22);
+ pin_ctrl |= (strength << 22);
+ } else {
+ /* GPIO22 */
+ gpio_oe &= ~(0x1 << 3);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 3);
+ gpio_data |= ((p[i].value & 0x1) << 3);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ case CX23885_PIN_I2S_BCLK_GPIO23:
+ if (p[i].function != CX23885_PAD_GPIO23) {
+ /* I2S_BCLK */
+ /* TODO: Input or Output config */
+ gpio_oe |= (0x1 << 4);
+ pin_ctrl &= ~(0x3 << 22);
+ pin_ctrl |= (strength << 22);
+ } else {
+ /* GPIO23 */
+ gpio_oe &= ~(0x1 << 4);
+ if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
+ gpio_data &= ~(0x1 << 4);
+ gpio_data |= ((p[i].value & 0x1) << 4);
+ }
+ pin_ctrl &= ~(0x3 << 12);
+ pin_ctrl |= (strength << 12);
+ }
+ break;
+ }
+ }
+
+ cx25840_write(client, 0x164, gpio_data);
+ cx25840_write(client, 0x160, gpio_oe);
+ cx25840_write4(client, 0x120, pin_ctrl);
+ return 0;
+}
+
+static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
+ struct v4l2_subdev_io_pin_config *pincfg)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ if (is_cx2388x(state))
+ return cx23885_s_io_pin_config(sd, n, pincfg);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
static void init_dll1(struct i2c_client *client)
{
/* This is the Hauppauge sequence used to
@@ -1610,6 +1762,7 @@ static const struct v4l2_subdev_core_ops cx25840_core_ops = {
.s_std = cx25840_s_std,
.reset = cx25840_reset,
.load_fw = cx25840_load_fw,
+ .s_io_pin_config = common_s_io_pin_config,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = cx25840_g_register,
.s_register = cx25840_s_register,
diff --git a/include/media/cx25840.h b/include/media/cx25840.h
index 0b0cb17767966..1bba39e3d406a 100644
--- a/include/media/cx25840.h
+++ b/include/media/cx25840.h
@@ -97,4 +97,79 @@ enum cx25840_audio_input {
CX25840_AUDIO8,
};
+enum cx25840_io_pin {
+ CX25840_PIN_DVALID_PRGM0 = 0,
+ CX25840_PIN_FIELD_PRGM1,
+ CX25840_PIN_HRESET_PRGM2,
+ CX25840_PIN_VRESET_HCTL_PRGM3,
+ CX25840_PIN_IRQ_N_PRGM4,
+ CX25840_PIN_IR_TX_PRGM6,
+ CX25840_PIN_IR_RX_PRGM5,
+ CX25840_PIN_GPIO0_PRGM8,
+ CX25840_PIN_GPIO1_PRGM9,
+ CX25840_PIN_SA_SDIN, /* Alternate GP Input only */
+ CX25840_PIN_SA_SDOUT, /* Alternate GP Input only */
+ CX25840_PIN_PLL_CLK_PRGM7,
+ CX25840_PIN_CHIP_SEL_VIPCLK, /* Output only */
+};
+
+enum cx25840_io_pad {
+ /* Output pads */
+ CX25840_PAD_DEFAULT = 0,
+ CX25840_PAD_ACTIVE,
+ CX25840_PAD_VACTIVE,
+ CX25840_PAD_CBFLAG,
+ CX25840_PAD_VID_DATA_EXT0,
+ CX25840_PAD_VID_DATA_EXT1,
+ CX25840_PAD_GPO0,
+ CX25840_PAD_GPO1,
+ CX25840_PAD_GPO2,
+ CX25840_PAD_GPO3,
+ CX25840_PAD_IRQ_N,
+ CX25840_PAD_AC_SYNC,
+ CX25840_PAD_AC_SDOUT,
+ CX25840_PAD_PLL_CLK,
+ CX25840_PAD_VRESET,
+ CX25840_PAD_RESERVED,
+ /* Pads for PLL_CLK output only */
+ CX25840_PAD_XTI_X5_DLL,
+ CX25840_PAD_AUX_PLL,
+ CX25840_PAD_VID_PLL,
+ CX25840_PAD_XTI,
+ /* Input Pads */
+ CX25840_PAD_GPI0,
+ CX25840_PAD_GPI1,
+ CX25840_PAD_GPI2,
+ CX25840_PAD_GPI3,
+};
+
+enum cx25840_io_pin_strength {
+ CX25840_PIN_DRIVE_MEDIUM = 0,
+ CX25840_PIN_DRIVE_SLOW,
+ CX25840_PIN_DRIVE_FAST,
+};
+
+enum cx23885_io_pin {
+ CX23885_PIN_IR_RX_GPIO19,
+ CX23885_PIN_IR_TX_GPIO20,
+ CX23885_PIN_I2S_SDAT_GPIO21,
+ CX23885_PIN_I2S_WCLK_GPIO22,
+ CX23885_PIN_I2S_BCLK_GPIO23,
+ CX23885_PIN_IRQ_N_GPIO16,
+};
+
+enum cx23885_io_pad {
+ CX23885_PAD_IR_RX,
+ CX23885_PAD_GPIO19,
+ CX23885_PAD_IR_TX,
+ CX23885_PAD_GPIO20,
+ CX23885_PAD_I2S_SDAT,
+ CX23885_PAD_GPIO21,
+ CX23885_PAD_I2S_WCLK,
+ CX23885_PAD_GPIO22,
+ CX23885_PAD_I2S_BCLK,
+ CX23885_PAD_GPIO23,
+ CX23885_PAD_IRQ_N,
+ CX23885_PAD_GPIO16,
+};
#endif
--
GitLab
From 5a28d9a320c865007da830c065bcaecfe91b3932 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 19:57:25 -0300
Subject: [PATCH 446/863] V4L/DVB: v4l2_subdev, cx23885: Differentiate IR
carrier sense and I/O pin inversion
There is a distinction on IR Tx for the CX2388[578] chips of carrier
sense inversion (space is a carrier burst and mark is no burst) and I/O
pin level inversion (0 is high output level, 1 is low output level).
Allow the caller to set these parameters distinctly as v4l2_subdevice
IR parameters. This permits the IR device to be configured and enabled
without the IR Tx LED being on during idle/space time due to an external
hardware level inversion
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-input.c | 2 +-
drivers/media/video/cx23885/cx23888-ir.c | 32 +++++++++++++++------
include/media/v4l2-subdev.h | 5 +++-
3 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index d0b1613ede2f4..496d751ffdc86 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -170,7 +170,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
* mark is received as low logic level;
* falling edges are detected as rising edges; etc.
*/
- params.invert = true;
+ params.invert_level = true;
break;
}
v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index f63d378257a76..28ca90ff223c0 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -60,6 +60,8 @@ MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
#define CNTRL_CPL 0x00001000
#define CNTRL_LBM 0x00002000
#define CNTRL_R 0x00004000
+/* CX23888 specific control flag */
+#define CNTRL_IVO 0x00008000
#define CX23888_IR_TXCLK_REG 0x170004
#define TXCLK_TCD 0x0000FFFF
@@ -423,6 +425,13 @@ static inline void control_tx_polarity_invert(struct cx23885_dev *dev,
invert ? CNTRL_CPL : 0);
}
+static inline void control_tx_level_invert(struct cx23885_dev *dev,
+ bool invert)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO,
+ invert ? CNTRL_IVO : 0);
+}
+
/*
* IR Rx & Tx Clock Register helpers
*/
@@ -782,8 +791,8 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH);
- o->invert = p->invert;
- atomic_set(&state->rx_invert, p->invert);
+ o->invert_level = p->invert_level;
+ atomic_set(&state->rx_invert, p->invert_level);
o->interrupt_enable = p->interrupt_enable;
o->enable = p->enable;
@@ -894,8 +903,11 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
/* FIXME - make this dependent on resolution for better performance */
control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY);
- control_tx_polarity_invert(dev, p->invert);
- o->invert = p->invert;
+ control_tx_polarity_invert(dev, p->invert_carrier_sense);
+ o->invert_carrier_sense = p->invert_carrier_sense;
+
+ control_tx_level_invert(dev, p->invert_level);
+ o->invert_level = p->invert_level;
o->interrupt_enable = p->interrupt_enable;
o->enable = p->enable;
@@ -1025,8 +1037,11 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
cntrl & CNTRL_TFE ? "enabled" : "disabled");
v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
cntrl & CNTRL_TIC ? "not empty" : "half full or less");
- v4l2_info(sd, "\tSignal polarity: %s\n",
- cntrl & CNTRL_CPL ? "0:mark 1:space" : "0:space 1:mark");
+ v4l2_info(sd, "\tOutput pin level inversion %s\n",
+ cntrl & CNTRL_IVO ? "yes" : "no");
+ v4l2_info(sd, "\tCarrier polarity: %s\n",
+ cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+ : "space:noburst mark:burst");
if (cntrl & CNTRL_MOD) {
v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n",
clock_divider_to_carrier_freq(txclk));
@@ -1146,7 +1161,7 @@ static const struct v4l2_subdev_ir_parameters default_rx_params = {
.noise_filter_min_width = 333333, /* ns */
.carrier_range_lower = 35000,
.carrier_range_upper = 37000,
- .invert = false,
+ .invert_level = false,
};
static const struct v4l2_subdev_ir_parameters default_tx_params = {
@@ -1160,7 +1175,8 @@ static const struct v4l2_subdev_ir_parameters default_tx_params = {
.modulation = true,
.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
.duty_cycle = 25, /* 25 % - RC-5 carrier */
- .invert = false,
+ .invert_level = false,
+ .invert_carrier_sense = false,
};
int cx23888_ir_probe(struct cx23885_dev *dev)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 9195ad490ee24..a780cca185fdb 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -379,7 +379,10 @@ struct v4l2_subdev_ir_parameters {
u32 max_pulse_width; /* ns, valid only for baseband signal */
unsigned int carrier_freq; /* Hz, valid only for modulated signal*/
unsigned int duty_cycle; /* percent, valid only for modulated signal*/
- bool invert; /* logically invert sense of mark/space */
+ bool invert_level; /* invert signal level */
+
+ /* Tx only */
+ bool invert_carrier_sense; /* Send 0/space as a carrier burst */
/* Rx only */
u32 noise_filter_min_width; /* ns, min time of a valid pulse */
--
GitLab
From 81f287da73377eb408de6879aa6c54c6d57dc1db Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 20:26:37 -0300
Subject: [PATCH 447/863] V4L/DVB: cx23885: For CX23888 IR, configure the IO
pin mux IR pins explcitly
Explicitly configure the IR Tx and IR Rx pins to be driven by the
IR Rx and Tx pads from the AV core for CX23888 IR.
For the HVR-1850 and HVR-1290 configure the IR Tx level inversion,
so the Tx LED is off when idle.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-cards.c | 31 +++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 29eea8d3613b6..e9586743692bb 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -962,6 +962,24 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
int cx23885_ir_init(struct cx23885_dev *dev)
{
+ static struct v4l2_subdev_io_pin_config ir_pin_cfg[] = {
+ {
+ .flags = V4L2_SUBDEV_IO_PIN_INPUT,
+ .pin = CX23885_PIN_IR_RX_GPIO19,
+ .function = CX23885_PAD_IR_RX,
+ .value = 0,
+ .strength = CX25840_PIN_DRIVE_MEDIUM,
+ }, {
+ .flags = V4L2_SUBDEV_IO_PIN_OUTPUT,
+ .pin = CX23885_PIN_IR_TX_GPIO20,
+ .function = CX23885_PAD_IR_TX,
+ .value = 0,
+ .strength = CX25840_PIN_DRIVE_MEDIUM,
+ }
+ };
+ const size_t ir_pin_cfg_count = ARRAY_SIZE(ir_pin_cfg);
+
+ struct v4l2_subdev_ir_parameters params;
int ret = 0;
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
@@ -982,7 +1000,20 @@ int cx23885_ir_init(struct cx23885_dev *dev)
if (ret)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_pin_cfg_count, ir_pin_cfg);
dev->pci_irqmask |= PCI_MSK_IR;
+ /*
+ * For these boards we need to invert the Tx output via the
+ * IR controller to have the LED off while idle
+ */
+ v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, ¶ms);
+ params.enable = false;
+ params.shutdown = false;
+ params.invert_level = true;
+ v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
+ params.shutdown = true;
+ v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
request_module("ir-kbd-i2c");
--
GitLab
From 260e689ba237fb513b49e98841d98e93ea639c75 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 20:54:52 -0300
Subject: [PATCH 448/863] V4L/DVB: v4l2_subdev: Move interrupt_service_routine
ptr to v4l2_subdev_core_ops
The CX2584x and related cores are multifunction subdevices with a number
of internal blocks that act as interrupt sources. Move the v4L2_subdev
interrupt_service_routine callback from v4l_subdev_ir_ops to
v4l2_subdev_core_ops, as the video and audio blocks of a CX2584x and
related cores can generate interrupts along with the IR block. This
change also makes sense for other subdev's that generate interrupts and
do not have an IR block.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-core.c | 2 +-
drivers/media/video/cx23885/cx23888-ir.c | 3 +--
include/media/v4l2-subdev.h | 16 +++++++---------
3 files changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index ff76f64edac1e..a74c0ab859ed0 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1765,7 +1765,7 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
handled += cx23885_video_irq(dev, vida_status);
if (pci_status & PCI_MSK_IR) {
- v4l2_subdev_call(dev->sd_ir, ir, interrupt_service_routine,
+ v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine,
pci_status, &ir_handled);
if (ir_handled)
handled++;
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index 28ca90ff223c0..51f21636e6393 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -1126,11 +1126,10 @@ static const struct v4l2_subdev_core_ops cx23888_ir_core_ops = {
.g_register = cx23888_ir_g_register,
.s_register = cx23888_ir_s_register,
#endif
+ .interrupt_service_routine = cx23888_ir_irq_handler,
};
static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = {
- .interrupt_service_routine = cx23888_ir_irq_handler,
-
.rx_read = cx23888_ir_rx_read,
.rx_g_parameters = cx23888_ir_rx_g_parameters,
.rx_s_parameters = cx23888_ir_rx_s_parameters,
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index a780cca185fdb..bacd52568ef9f 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -131,6 +131,11 @@ struct v4l2_subdev_io_pin_config {
s_power: puts subdevice in power saving mode (on == 0) or normal operation
mode (on == 1).
+
+ interrupt_service_routine: Called by the bridge chip's interrupt service
+ handler, when an interrupt status has be raised due to this subdev,
+ so that this subdev can handle the details. It may schedule work to be
+ performed later. It must not sleep. *Called from an IRQ context*.
*/
struct v4l2_subdev_core_ops {
int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
@@ -156,6 +161,8 @@ struct v4l2_subdev_core_ops {
int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
#endif
int (*s_power)(struct v4l2_subdev *sd, int on);
+ int (*interrupt_service_routine)(struct v4l2_subdev *sd,
+ u32 status, bool *handled);
};
/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio.
@@ -330,11 +337,6 @@ struct v4l2_subdev_sensor_ops {
};
/*
- interrupt_service_routine: Called by the bridge chip's interrupt service
- handler, when an IR interrupt status has be raised due to this subdev,
- so that this subdev can handle the details. It may schedule work to be
- performed later. It must not sleep. *Called from an IRQ context*.
-
[rt]x_g_parameters: Get the current operating parameters and state of the
the IR receiver or transmitter.
@@ -392,10 +394,6 @@ struct v4l2_subdev_ir_parameters {
};
struct v4l2_subdev_ir_ops {
- /* Common to receiver and transmitter */
- int (*interrupt_service_routine)(struct v4l2_subdev *sd,
- u32 status, bool *handled);
-
/* Receiver */
int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
ssize_t *num);
--
GitLab
From 52fd3dda130d03ae5c2bbdcbe81f6e083c051e12 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 22:08:03 -0300
Subject: [PATCH 449/863] V4L/DVB: cx25840: Add support for CX2388[57] A/V core
integrated IR controllers
This patch is primarily a port of the integrated IR controller code in
cx23885/cx23888-ir.c. Right now, only the CX2388[57] AV core will
really try to set up IR. This IR support, by design, still requires the
bridge driver to do final IO pin mux configuration and setup of the IR
controller parameters.
For the CX2388[578] chips, enabling the AV Core for IR also starts
sending Audio and Video interrupts to the bridge driver. For
CX2388[578] chips audio and video interrupts are ignored and
acknowledged when they happen.
IR interrupt handling and status logging is exluded for the CX23888
which does not have an IR controller on the AV core.
Note that experimentation reveals that the IR irq enables on the
CX23885 have an inverted logic sense. The CX23887 likely suffers from
the same quirk. For these chips, those irq enable bits are handled
as interrupt disables.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx25840/Makefile | 2 +-
drivers/media/video/cx25840/cx25840-core.c | 128 ++
drivers/media/video/cx25840/cx25840-core.h | 28 +
drivers/media/video/cx25840/cx25840-ir.c | 1262 ++++++++++++++++++++
4 files changed, 1419 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/video/cx25840/cx25840-ir.c
diff --git a/drivers/media/video/cx25840/Makefile b/drivers/media/video/cx25840/Makefile
index 6e8665be8954f..2ee96d3973b86 100644
--- a/drivers/media/video/cx25840/Makefile
+++ b/drivers/media/video/cx25840/Makefile
@@ -1,5 +1,5 @@
cx25840-objs := cx25840-core.o cx25840-audio.o cx25840-firmware.o \
- cx25840-vbi.o
+ cx25840-vbi.o cx25840-ir.o
obj-$(CONFIG_VIDEO_CX25840) += cx25840.o
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 46a046d6405ee..9fab0b1708465 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -15,6 +15,9 @@
*
* CX23885 support by Steven Toth <stoth@linuxtv.org>.
*
+ * CX2388[578] IRQ handling, IO Pin mux configuration and other small fixes are
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
@@ -48,6 +51,28 @@ MODULE_DESCRIPTION("Conexant CX25840 audio/video decoder driver");
MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford");
MODULE_LICENSE("GPL");
+#define CX25840_VID_INT_STAT_REG 0x410
+#define CX25840_VID_INT_STAT_BITS 0x0000ffff
+#define CX25840_VID_INT_MASK_BITS 0xffff0000
+#define CX25840_VID_INT_MASK_SHFT 16
+#define CX25840_VID_INT_MASK_REG 0x412
+
+#define CX23885_AUD_MC_INT_MASK_REG 0x80c
+#define CX23885_AUD_MC_INT_STAT_BITS 0xffff0000
+#define CX23885_AUD_MC_INT_CTRL_BITS 0x0000ffff
+#define CX23885_AUD_MC_INT_STAT_SHFT 16
+
+#define CX25840_AUD_INT_CTRL_REG 0x812
+#define CX25840_AUD_INT_STAT_REG 0x813
+
+#define CX23885_PIN_CTRL_IRQ_REG 0x123
+#define CX23885_PIN_CTRL_IRQ_IR_STAT 0x40
+#define CX23885_PIN_CTRL_IRQ_AUD_STAT 0x20
+#define CX23885_PIN_CTRL_IRQ_VID_STAT 0x10
+
+#define CX25840_IR_STATS_REG 0x210
+#define CX25840_IR_IRQEN_REG 0x214
+
static int cx25840_debug;
module_param_named(debug,cx25840_debug, int, 0644);
@@ -137,6 +162,14 @@ int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
or_value);
}
+int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask,
+ u32 or_value)
+{
+ return cx25840_write4(client, addr,
+ (cx25840_read4(client, addr) & and_mask) |
+ or_value);
+}
+
/* ----------------------------------------------------------------------- */
static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input,
@@ -592,6 +625,13 @@ static void cx23885_initialize(struct i2c_client *client)
/* start microcontroller */
cx25840_and_or(client, 0x803, ~0x10, 0x10);
+
+ /* Disable and clear video interrupts - we don't use them */
+ cx25840_write4(client, CX25840_VID_INT_STAT_REG, 0xffffffff);
+
+ /* Disable and clear audio interrupts - we don't use them */
+ cx25840_write(client, CX25840_AUD_INT_CTRL_REG, 0xff);
+ cx25840_write(client, CX25840_AUD_INT_STAT_REG, 0xff);
}
/* ----------------------------------------------------------------------- */
@@ -1748,9 +1788,93 @@ static int cx25840_log_status(struct v4l2_subdev *sd)
log_video_status(client);
if (!is_cx2583x(state))
log_audio_status(client);
+ cx25840_ir_log_status(sd);
return 0;
}
+static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status,
+ bool *handled)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ u8 irq_stat, aud_stat, aud_en, ir_stat, ir_en;
+ u32 vid_stat, aud_mc_stat;
+ bool block_handled;
+ int ret = 0;
+
+ irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG);
+ v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (entry): %s %s %s\n",
+ irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : " ",
+ irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : " ",
+ irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : " ");
+
+ if ((is_cx23885(state) || is_cx23887(state))) {
+ ir_stat = cx25840_read(c, CX25840_IR_STATS_REG);
+ ir_en = cx25840_read(c, CX25840_IR_IRQEN_REG);
+ v4l_dbg(2, cx25840_debug, c,
+ "AV Core ir IRQ status: %#04x disables: %#04x\n",
+ ir_stat, ir_en);
+ if (irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT) {
+ block_handled = false;
+ ret = cx25840_ir_irq_handler(sd,
+ status, &block_handled);
+ if (block_handled)
+ *handled = true;
+ }
+ }
+
+ aud_stat = cx25840_read(c, CX25840_AUD_INT_STAT_REG);
+ aud_en = cx25840_read(c, CX25840_AUD_INT_CTRL_REG);
+ v4l_dbg(2, cx25840_debug, c,
+ "AV Core audio IRQ status: %#04x disables: %#04x\n",
+ aud_stat, aud_en);
+ aud_mc_stat = cx25840_read4(c, CX23885_AUD_MC_INT_MASK_REG);
+ v4l_dbg(2, cx25840_debug, c,
+ "AV Core audio MC IRQ status: %#06x enables: %#06x\n",
+ aud_mc_stat >> CX23885_AUD_MC_INT_STAT_SHFT,
+ aud_mc_stat & CX23885_AUD_MC_INT_CTRL_BITS);
+ if (irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT) {
+ if (aud_stat) {
+ cx25840_write(c, CX25840_AUD_INT_STAT_REG, aud_stat);
+ *handled = true;
+ }
+ }
+
+ vid_stat = cx25840_read4(c, CX25840_VID_INT_STAT_REG);
+ v4l_dbg(2, cx25840_debug, c,
+ "AV Core video IRQ status: %#06x disables: %#06x\n",
+ vid_stat & CX25840_VID_INT_STAT_BITS,
+ vid_stat >> CX25840_VID_INT_MASK_SHFT);
+ if (irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT) {
+ if (vid_stat & CX25840_VID_INT_STAT_BITS) {
+ cx25840_write4(c, CX25840_VID_INT_STAT_REG, vid_stat);
+ *handled = true;
+ }
+ }
+
+ irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG);
+ v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (exit): %s %s %s\n",
+ irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : " ",
+ irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : " ",
+ irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : " ");
+
+ return ret;
+}
+
+static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status,
+ bool *handled)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ *handled = false;
+
+ /* Only support the CX2388[578] AV Core for now */
+ if (is_cx2388x(state))
+ return cx23885_irq_handler(sd, status, handled);
+
+ return -ENODEV;
+}
+
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops cx25840_core_ops = {
@@ -1767,6 +1891,7 @@ static const struct v4l2_subdev_core_ops cx25840_core_ops = {
.g_register = cx25840_g_register,
.s_register = cx25840_s_register,
#endif
+ .interrupt_service_routine = cx25840_irq_handler,
};
static const struct v4l2_subdev_tuner_ops cx25840_tuner_ops = {
@@ -1801,6 +1926,7 @@ static const struct v4l2_subdev_ops cx25840_ops = {
.audio = &cx25840_audio_ops,
.video = &cx25840_video_ops,
.vbi = &cx25840_vbi_ops,
+ .ir = &cx25840_ir_ops,
};
/* ----------------------------------------------------------------------- */
@@ -1942,6 +2068,7 @@ static int cx25840_probe(struct i2c_client *client,
state->id = id;
state->rev = device_id;
+ cx25840_ir_probe(sd);
return 0;
}
@@ -1949,6 +2076,7 @@ static int cx25840_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ cx25840_ir_remove(sd);
v4l2_device_unregister_subdev(sd);
kfree(to_state(sd));
return 0;
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
index 04393b9715671..8f47322c003dc 100644
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ b/drivers/media/video/cx25840/cx25840-core.h
@@ -34,6 +34,8 @@
providing this information. */
#define CX25840_CID_ENABLE_PVR150_WORKAROUND (V4L2_CID_PRIVATE_BASE+0)
+struct cx25840_ir_state;
+
struct cx25840_state {
struct i2c_client *c;
struct v4l2_subdev sd;
@@ -52,6 +54,7 @@ struct cx25840_state {
int is_initialized;
wait_queue_head_t fw_wait; /* wake up when the fw load is finished */
struct work_struct fw_work; /* work entry for fw load */
+ struct cx25840_ir_state *ir_state;
};
static inline struct cx25840_state *to_state(struct v4l2_subdev *sd)
@@ -77,6 +80,21 @@ static inline bool is_cx2388x(struct cx25840_state *state)
state->id == V4L2_IDENT_CX23888_AV;
}
+static inline bool is_cx23885(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX23885_AV;
+}
+
+static inline bool is_cx23887(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX23887_AV;
+}
+
+static inline bool is_cx23888(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX23888_AV;
+}
+
/* ----------------------------------------------------------------------- */
/* cx25850-core.c */
int cx25840_write(struct i2c_client *client, u16 addr, u8 value);
@@ -84,6 +102,8 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value);
u8 cx25840_read(struct i2c_client *client, u16 addr);
u32 cx25840_read4(struct i2c_client *client, u16 addr);
int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value);
+int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask,
+ u32 or_value);
void cx25840_std_setup(struct i2c_client *client);
/* ----------------------------------------------------------------------- */
@@ -104,4 +124,12 @@ int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *
int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi);
+/* ----------------------------------------------------------------------- */
+/* cx25850-ir.c */
+extern const struct v4l2_subdev_ir_ops cx25840_ir_ops;
+int cx25840_ir_log_status(struct v4l2_subdev *sd);
+int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled);
+int cx25840_ir_probe(struct v4l2_subdev *sd);
+int cx25840_ir_remove(struct v4l2_subdev *sd);
+
#endif
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
new file mode 100644
index 0000000000000..308e87e9fae72
--- /dev/null
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -0,0 +1,1262 @@
+/*
+ * Driver for the Conexant CX2584x Audio/Video decoder chip and related cores
+ *
+ * Integrated Consumer Infrared Controller
+ *
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/kfifo.h>
+#include <media/cx25840.h>
+
+#include "cx25840-core.h"
+
+static unsigned int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable integrated IR debug messages");
+
+#define CX25840_IR_REG_BASE 0x200
+
+#define CX25840_IR_CNTRL_REG 0x200
+#define CNTRL_WIN_3_3 0x00000000
+#define CNTRL_WIN_4_3 0x00000001
+#define CNTRL_WIN_3_4 0x00000002
+#define CNTRL_WIN_4_4 0x00000003
+#define CNTRL_WIN 0x00000003
+#define CNTRL_EDG_NONE 0x00000000
+#define CNTRL_EDG_FALL 0x00000004
+#define CNTRL_EDG_RISE 0x00000008
+#define CNTRL_EDG_BOTH 0x0000000C
+#define CNTRL_EDG 0x0000000C
+#define CNTRL_DMD 0x00000010
+#define CNTRL_MOD 0x00000020
+#define CNTRL_RFE 0x00000040
+#define CNTRL_TFE 0x00000080
+#define CNTRL_RXE 0x00000100
+#define CNTRL_TXE 0x00000200
+#define CNTRL_RIC 0x00000400
+#define CNTRL_TIC 0x00000800
+#define CNTRL_CPL 0x00001000
+#define CNTRL_LBM 0x00002000
+#define CNTRL_R 0x00004000
+
+#define CX25840_IR_TXCLK_REG 0x204
+#define TXCLK_TCD 0x0000FFFF
+
+#define CX25840_IR_RXCLK_REG 0x208
+#define RXCLK_RCD 0x0000FFFF
+
+#define CX25840_IR_CDUTY_REG 0x20C
+#define CDUTY_CDC 0x0000000F
+
+#define CX25840_IR_STATS_REG 0x210
+#define STATS_RTO 0x00000001
+#define STATS_ROR 0x00000002
+#define STATS_RBY 0x00000004
+#define STATS_TBY 0x00000008
+#define STATS_RSR 0x00000010
+#define STATS_TSR 0x00000020
+
+#define CX25840_IR_IRQEN_REG 0x214
+#define IRQEN_RTE 0x00000001
+#define IRQEN_ROE 0x00000002
+#define IRQEN_RSE 0x00000010
+#define IRQEN_TSE 0x00000020
+#define IRQEN_MSK 0x00000033
+
+#define CX25840_IR_FILTR_REG 0x218
+#define FILTR_LPF 0x0000FFFF
+
+#define CX25840_IR_FIFO_REG 0x23C
+#define FIFO_RXTX 0x0000FFFF
+#define FIFO_RXTX_LVL 0x00010000
+#define FIFO_RXTX_RTO 0x0001FFFF
+#define FIFO_RX_NDV 0x00020000
+#define FIFO_RX_DEPTH 8
+#define FIFO_TX_DEPTH 8
+
+#define CX25840_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */
+#define CX25840_IR_REFCLK_FREQ (CX25840_VIDCLK_FREQ / 2)
+
+#define CX25840_IR_RX_KFIFO_SIZE (512 * sizeof(u32))
+#define CX25840_IR_TX_KFIFO_SIZE (512 * sizeof(u32))
+
+struct cx25840_ir_state {
+ struct i2c_client *c;
+
+ struct v4l2_subdev_ir_parameters rx_params;
+ struct mutex rx_params_lock; /* protects Rx parameter settings cache */
+ atomic_t rxclk_divider;
+ atomic_t rx_invert;
+
+ struct kfifo rx_kfifo;
+ spinlock_t rx_kfifo_lock; /* protect Rx data kfifo */
+
+ struct v4l2_subdev_ir_parameters tx_params;
+ struct mutex tx_params_lock; /* protects Tx parameter settings cache */
+ atomic_t txclk_divider;
+};
+
+static inline struct cx25840_ir_state *to_ir_state(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+ return state ? state->ir_state : NULL;
+}
+
+
+/*
+ * Rx and Tx Clock Divider register computations
+ *
+ * Note the largest clock divider value of 0xffff corresponds to:
+ * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_clock_divider(unsigned int d)
+{
+ if (d > RXCLK_RCD + 1)
+ d = RXCLK_RCD;
+ else if (d < 2)
+ d = 1;
+ else
+ d--;
+ return (u16) d;
+}
+
+static inline u16 ns_to_clock_divider(unsigned int ns)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int clock_divider_to_ns(unsigned int divider)
+{
+ /* Period of the Rx or Tx clock in ns */
+ return DIV_ROUND_CLOSEST((divider + 1) * 1000,
+ CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline u16 carrier_freq_to_clock_divider(unsigned int freq)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * 16));
+}
+
+static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider)
+{
+ return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, (divider + 1) * 16);
+}
+
+static inline u16 freq_to_clock_divider(unsigned int freq,
+ unsigned int rollovers)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * rollovers));
+}
+
+static inline unsigned int clock_divider_to_freq(unsigned int divider,
+ unsigned int rollovers)
+{
+ return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ,
+ (divider + 1) * rollovers);
+}
+
+/*
+ * Low Pass Filter register calculations
+ *
+ * Note the largest count value of 0xffff corresponds to:
+ * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_lpf_count(unsigned int d)
+{
+ if (d > FILTR_LPF)
+ d = FILTR_LPF;
+ else if (d < 4)
+ d = 0;
+ return (u16) d;
+}
+
+static inline u16 ns_to_lpf_count(unsigned int ns)
+{
+ return count_to_lpf_count(
+ DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int lpf_count_to_ns(unsigned int count)
+{
+ /* Duration of the Low Pass Filter rejection window in ns */
+ return DIV_ROUND_CLOSEST(count * 1000,
+ CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline unsigned int lpf_count_to_us(unsigned int count)
+{
+ /* Duration of the Low Pass Filter rejection window in us */
+ return DIV_ROUND_CLOSEST(count, CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+/*
+ * FIFO register pulse width count compuations
+ */
+static u32 clock_divider_to_resolution(u16 divider)
+{
+ /*
+ * Resolution is the duration of 1 tick of the readable portion of
+ * of the pulse width counter as read from the FIFO. The two lsb's are
+ * not readable, hence the << 2. This function returns ns.
+ */
+ return DIV_ROUND_CLOSEST((1 << 2) * ((u32) divider + 1) * 1000,
+ CX25840_IR_REFCLK_FREQ / 1000000);
+}
+
+static u64 pulse_width_count_to_ns(u16 count, u16 divider)
+{
+ u64 n;
+ u32 rem;
+
+ /*
+ * The 2 lsb's of the pulse width timer count are not readable, hence
+ * the (count << 2) | 0x3
+ */
+ n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */
+ rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => ns */
+ if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2)
+ n++;
+ return n;
+}
+
+#if 0
+/* Keep as we will need this for Transmit functionality */
+static u16 ns_to_pulse_width_count(u32 ns, u16 divider)
+{
+ u64 n;
+ u32 d;
+ u32 rem;
+
+ /*
+ * The 2 lsb's of the pulse width timer count are not accessable, hence
+ * the (1 << 2)
+ */
+ n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */
+ d = (1 << 2) * ((u32) divider + 1) * 1000; /* millicycles/count */
+ rem = do_div(n, d);
+ if (rem >= d / 2)
+ n++;
+
+ if (n > FIFO_RXTX)
+ n = FIFO_RXTX;
+ else if (n == 0)
+ n = 1;
+ return (u16) n;
+}
+
+#endif
+static unsigned int pulse_width_count_to_us(u16 count, u16 divider)
+{
+ u64 n;
+ u32 rem;
+
+ /*
+ * The 2 lsb's of the pulse width timer count are not readable, hence
+ * the (count << 2) | 0x3
+ */
+ n = (((u64) count << 2) | 0x3) * (divider + 1); /* cycles */
+ rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => us */
+ if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2)
+ n++;
+ return (unsigned int) n;
+}
+
+/*
+ * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts
+ *
+ * The total pulse clock count is an 18 bit pulse width timer count as the most
+ * significant part and (up to) 16 bit clock divider count as a modulus.
+ * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse
+ * width timer count's least significant bit.
+ */
+static u64 ns_to_pulse_clocks(u32 ns)
+{
+ u64 clocks;
+ u32 rem;
+ clocks = CX25840_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles */
+ rem = do_div(clocks, 1000); /* /1000 = cycles */
+ if (rem >= 1000 / 2)
+ clocks++;
+ return clocks;
+}
+
+static u16 pulse_clocks_to_clock_divider(u64 count)
+{
+ u32 rem;
+
+ rem = do_div(count, (FIFO_RXTX << 2) | 0x3);
+
+ /* net result needs to be rounded down and decremented by 1 */
+ if (count > RXCLK_RCD + 1)
+ count = RXCLK_RCD;
+ else if (count < 2)
+ count = 1;
+ else
+ count--;
+ return (u16) count;
+}
+
+/*
+ * IR Control Register helpers
+ */
+enum tx_fifo_watermark {
+ TX_FIFO_HALF_EMPTY = 0,
+ TX_FIFO_EMPTY = CNTRL_TIC,
+};
+
+enum rx_fifo_watermark {
+ RX_FIFO_HALF_FULL = 0,
+ RX_FIFO_NOT_EMPTY = CNTRL_RIC,
+};
+
+static inline void control_tx_irq_watermark(struct i2c_client *c,
+ enum tx_fifo_watermark level)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_TIC, level);
+}
+
+static inline void control_rx_irq_watermark(struct i2c_client *c,
+ enum rx_fifo_watermark level)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_RIC, level);
+}
+
+static inline void control_tx_enable(struct i2c_client *c, bool enable)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE),
+ enable ? (CNTRL_TXE | CNTRL_TFE) : 0);
+}
+
+static inline void control_rx_enable(struct i2c_client *c, bool enable)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE),
+ enable ? (CNTRL_RXE | CNTRL_RFE) : 0);
+}
+
+static inline void control_tx_modulation_enable(struct i2c_client *c,
+ bool enable)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_MOD,
+ enable ? CNTRL_MOD : 0);
+}
+
+static inline void control_rx_demodulation_enable(struct i2c_client *c,
+ bool enable)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_DMD,
+ enable ? CNTRL_DMD : 0);
+}
+
+static inline void control_rx_s_edge_detection(struct i2c_client *c,
+ u32 edge_types)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_EDG_BOTH,
+ edge_types & CNTRL_EDG_BOTH);
+}
+
+static void control_rx_s_carrier_window(struct i2c_client *c,
+ unsigned int carrier,
+ unsigned int *carrier_range_low,
+ unsigned int *carrier_range_high)
+{
+ u32 v;
+ unsigned int c16 = carrier * 16;
+
+ if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) {
+ v = CNTRL_WIN_3_4;
+ *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4);
+ } else {
+ v = CNTRL_WIN_3_3;
+ *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3);
+ }
+
+ if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) {
+ v |= CNTRL_WIN_4_3;
+ *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4);
+ } else {
+ v |= CNTRL_WIN_3_3;
+ *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3);
+ }
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_WIN, v);
+}
+
+static inline void control_tx_polarity_invert(struct i2c_client *c,
+ bool invert)
+{
+ cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_CPL,
+ invert ? CNTRL_CPL : 0);
+}
+
+/*
+ * IR Rx & Tx Clock Register helpers
+ */
+static unsigned int txclk_tx_s_carrier(struct i2c_client *c,
+ unsigned int freq,
+ u16 *divider)
+{
+ *divider = carrier_freq_to_clock_divider(freq);
+ cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
+ return clock_divider_to_carrier_freq(*divider);
+}
+
+static unsigned int rxclk_rx_s_carrier(struct i2c_client *c,
+ unsigned int freq,
+ u16 *divider)
+{
+ *divider = carrier_freq_to_clock_divider(freq);
+ cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
+ return clock_divider_to_carrier_freq(*divider);
+}
+
+static u32 txclk_tx_s_max_pulse_width(struct i2c_client *c, u32 ns,
+ u16 *divider)
+{
+ u64 pulse_clocks;
+
+ if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
+ ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ pulse_clocks = ns_to_pulse_clocks(ns);
+ *divider = pulse_clocks_to_clock_divider(pulse_clocks);
+ cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
+ return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+static u32 rxclk_rx_s_max_pulse_width(struct i2c_client *c, u32 ns,
+ u16 *divider)
+{
+ u64 pulse_clocks;
+
+ if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
+ ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ pulse_clocks = ns_to_pulse_clocks(ns);
+ *divider = pulse_clocks_to_clock_divider(pulse_clocks);
+ cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
+ return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+/*
+ * IR Tx Carrier Duty Cycle register helpers
+ */
+static unsigned int cduty_tx_s_duty_cycle(struct i2c_client *c,
+ unsigned int duty_cycle)
+{
+ u32 n;
+ n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */
+ if (n != 0)
+ n--;
+ if (n > 15)
+ n = 15;
+ cx25840_write4(c, CX25840_IR_CDUTY_REG, n);
+ return DIV_ROUND_CLOSEST((n + 1) * 100, 16);
+}
+
+/*
+ * IR Filter Register helpers
+ */
+static u32 filter_rx_s_min_width(struct i2c_client *c, u32 min_width_ns)
+{
+ u32 count = ns_to_lpf_count(min_width_ns);
+ cx25840_write4(c, CX25840_IR_FILTR_REG, count);
+ return lpf_count_to_ns(count);
+}
+
+/*
+ * IR IRQ Enable Register helpers
+ */
+static inline void irqenable_rx(struct v4l2_subdev *sd, u32 mask)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ if (is_cx23885(state) || is_cx23887(state))
+ mask ^= IRQEN_MSK;
+ mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE);
+ cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG,
+ ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask);
+}
+
+static inline void irqenable_tx(struct v4l2_subdev *sd, u32 mask)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ if (is_cx23885(state) || is_cx23887(state))
+ mask ^= IRQEN_MSK;
+ mask &= IRQEN_TSE;
+ cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG, ~IRQEN_TSE, mask);
+}
+
+/*
+ * V4L2 Subdevice IR Ops
+ */
+int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c = NULL;
+ unsigned long flags;
+
+ u32 rx_data[FIFO_RX_DEPTH];
+ int i, j, k;
+ u32 events, v;
+ int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
+ u32 cntrl, irqen, stats;
+
+ *handled = false;
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ c = ir_state->c;
+
+ /* Only support the IR controller for the CX2388[57] AV Core for now */
+ if (!(is_cx23885(state) || is_cx23887(state)))
+ return -ENODEV;
+
+ cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG);
+ irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG);
+ if (is_cx23885(state) || is_cx23887(state))
+ irqen ^= IRQEN_MSK;
+ stats = cx25840_read4(c, CX25840_IR_STATS_REG);
+
+ tsr = stats & STATS_TSR; /* Tx FIFO Service Request */
+ rsr = stats & STATS_RSR; /* Rx FIFO Service Request */
+ rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */
+ ror = stats & STATS_ROR; /* Rx FIFO Over Run */
+
+ tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
+ rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */
+ rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
+ roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
+
+ v4l2_dbg(2, ir_debug, sd, "IR IRQ Status: %s %s %s %s %s %s\n",
+ tsr ? "tsr" : " ", rsr ? "rsr" : " ",
+ rto ? "rto" : " ", ror ? "ror" : " ",
+ stats & STATS_TBY ? "tby" : " ",
+ stats & STATS_RBY ? "rby" : " ");
+
+ v4l2_dbg(2, ir_debug, sd, "IR IRQ Enables: %s %s %s %s\n",
+ tse ? "tse" : " ", rse ? "rse" : " ",
+ rte ? "rte" : " ", roe ? "roe" : " ");
+
+ /*
+ * Transmitter interrupt service
+ */
+ if (tse && tsr) {
+ /*
+ * TODO:
+ * Check the watermark threshold setting
+ * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo
+ * Push the data to the hardware FIFO.
+ * If there was nothing more to send in the tx_kfifo, disable
+ * the TSR IRQ and notify the v4l2_device.
+ * If there was something in the tx_kfifo, check the tx_kfifo
+ * level and notify the v4l2_device, if it is low.
+ */
+ /* For now, inhibit TSR interrupt until Tx is implemented */
+ irqenable_tx(sd, 0);
+ events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events);
+ *handled = true;
+ }
+
+ /*
+ * Receiver interrupt service
+ */
+ kror = 0;
+ if ((rse && rsr) || (rte && rto)) {
+ /*
+ * Receive data on RSR to clear the STATS_RSR.
+ * Receive data on RTO, since we may not have yet hit the RSR
+ * watermark when we receive the RTO.
+ */
+ for (i = 0, v = FIFO_RX_NDV;
+ (v & FIFO_RX_NDV) && !kror; i = 0) {
+ for (j = 0;
+ (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
+ v = cx25840_read4(c, CX25840_IR_FIFO_REG);
+ rx_data[i++] = v & ~FIFO_RX_NDV;
+ }
+ if (i == 0)
+ break;
+ j = i * sizeof(u32);
+ k = kfifo_in_locked(&ir_state->rx_kfifo,
+ (unsigned char *) rx_data, j,
+ &ir_state->rx_kfifo_lock);
+ if (k != j)
+ kror++; /* rx_kfifo over run */
+ }
+ *handled = true;
+ }
+
+ events = 0;
+ v = 0;
+ if (kror) {
+ events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+ v4l2_err(sd, "IR receiver software FIFO overrun\n");
+ }
+ if (roe && ror) {
+ /*
+ * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear
+ * the Rx FIFO Over Run status (STATS_ROR)
+ */
+ v |= CNTRL_RFE;
+ events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+ v4l2_err(sd, "IR receiver hardware FIFO overrun\n");
+ }
+ if (rte && rto) {
+ /*
+ * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear
+ * the Rx Pulse Width Timer Time Out (STATS_RTO)
+ */
+ v |= CNTRL_RXE;
+ events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+ }
+ if (v) {
+ /* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */
+ cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl & ~v);
+ cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl);
+ *handled = true;
+ }
+ spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags);
+ if (kfifo_len(&ir_state->rx_kfifo) >= CX25840_IR_RX_KFIFO_SIZE / 2)
+ events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+ spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags);
+
+ if (events)
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events);
+ return 0;
+}
+
+/* Receiver */
+static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
+ ssize_t *num)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ bool invert;
+ u16 divider;
+ unsigned int i, n;
+ u32 *p;
+ u32 u, v;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ invert = (bool) atomic_read(&ir_state->rx_invert);
+ divider = (u16) atomic_read(&ir_state->rxclk_divider);
+
+ n = count / sizeof(u32) * sizeof(u32);
+ if (n == 0) {
+ *num = 0;
+ return 0;
+ }
+
+ n = kfifo_out_locked(&ir_state->rx_kfifo, buf, n,
+ &ir_state->rx_kfifo_lock);
+
+ n /= sizeof(u32);
+ *num = n * sizeof(u32);
+
+ for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
+ if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+ *p = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
+ v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
+ continue;
+ }
+
+ u = (*p & FIFO_RXTX_LVL) ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
+ if (invert)
+ u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
+
+ v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
+ divider);
+ if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
+ v = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS - 1;
+
+ *p = u | v;
+
+ v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns %s\n",
+ v, u ? "mark" : "space");
+ }
+ return 0;
+}
+
+static int cx25840_ir_rx_g_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ mutex_lock(&ir_state->rx_params_lock);
+ memcpy(p, &ir_state->rx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ mutex_unlock(&ir_state->rx_params_lock);
+ return 0;
+}
+
+static int cx25840_ir_rx_shutdown(struct v4l2_subdev *sd)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ c = ir_state->c;
+ mutex_lock(&ir_state->rx_params_lock);
+
+ /* Disable or slow down all IR Rx circuits and counters */
+ irqenable_rx(sd, 0);
+ control_rx_enable(c, false);
+ control_rx_demodulation_enable(c, false);
+ control_rx_s_edge_detection(c, CNTRL_EDG_NONE);
+ filter_rx_s_min_width(c, 0);
+ cx25840_write4(c, CX25840_IR_RXCLK_REG, RXCLK_RCD);
+
+ ir_state->rx_params.shutdown = true;
+
+ mutex_unlock(&ir_state->rx_params_lock);
+ return 0;
+}
+
+static int cx25840_ir_rx_s_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+ struct v4l2_subdev_ir_parameters *o;
+ u16 rxclk_divider;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ if (p->shutdown)
+ return cx25840_ir_rx_shutdown(sd);
+
+ if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+ return -ENOSYS;
+
+ c = ir_state->c;
+ o = &ir_state->rx_params;
+
+ mutex_lock(&ir_state->rx_params_lock);
+
+ o->shutdown = p->shutdown;
+
+ p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ o->mode = p->mode;
+
+ p->bytes_per_data_element = sizeof(u32);
+ o->bytes_per_data_element = p->bytes_per_data_element;
+
+ /* Before we tweak the hardware, we have to disable the receiver */
+ irqenable_rx(sd, 0);
+ control_rx_enable(c, false);
+
+ control_rx_demodulation_enable(c, p->modulation);
+ o->modulation = p->modulation;
+
+ if (p->modulation) {
+ p->carrier_freq = rxclk_rx_s_carrier(c, p->carrier_freq,
+ &rxclk_divider);
+
+ o->carrier_freq = p->carrier_freq;
+
+ p->duty_cycle = 50;
+ o->duty_cycle = p->duty_cycle;
+
+ control_rx_s_carrier_window(c, p->carrier_freq,
+ &p->carrier_range_lower,
+ &p->carrier_range_upper);
+ o->carrier_range_lower = p->carrier_range_lower;
+ o->carrier_range_upper = p->carrier_range_upper;
+ } else {
+ p->max_pulse_width =
+ rxclk_rx_s_max_pulse_width(c, p->max_pulse_width,
+ &rxclk_divider);
+ o->max_pulse_width = p->max_pulse_width;
+ }
+ atomic_set(&ir_state->rxclk_divider, rxclk_divider);
+
+ p->noise_filter_min_width =
+ filter_rx_s_min_width(c, p->noise_filter_min_width);
+ o->noise_filter_min_width = p->noise_filter_min_width;
+
+ p->resolution = clock_divider_to_resolution(rxclk_divider);
+ o->resolution = p->resolution;
+
+ /* FIXME - make this dependent on resolution for better performance */
+ control_rx_irq_watermark(c, RX_FIFO_HALF_FULL);
+
+ control_rx_s_edge_detection(c, CNTRL_EDG_BOTH);
+
+ o->invert_level = p->invert_level;
+ atomic_set(&ir_state->rx_invert, p->invert_level);
+
+ o->interrupt_enable = p->interrupt_enable;
+ o->enable = p->enable;
+ if (p->enable) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags);
+ kfifo_reset(&ir_state->rx_kfifo);
+ spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags);
+ if (p->interrupt_enable)
+ irqenable_rx(sd, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
+ control_rx_enable(c, p->enable);
+ }
+
+ mutex_unlock(&ir_state->rx_params_lock);
+ return 0;
+}
+
+/* Transmitter */
+static int cx25840_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
+ ssize_t *num)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ c = ir_state->c;
+#if 0
+ /*
+ * FIXME - the code below is an incomplete and untested sketch of what
+ * may need to be done. The critical part is to get 4 (or 8) pulses
+ * from the tx_kfifo, or converted from ns to the proper units from the
+ * input, and push them off to the hardware Tx FIFO right away, if the
+ * HW TX fifo needs service. The rest can be pushed to the tx_kfifo in
+ * a less critical timeframe. Also watch out for overruning the
+ * tx_kfifo - don't let it happen and let the caller know not all his
+ * pulses were written.
+ */
+ u32 *ns_pulse = (u32 *) buf;
+ unsigned int n;
+ u32 fifo_pulse[FIFO_TX_DEPTH];
+ u32 mark;
+
+ /* Compute how much we can fit in the tx kfifo */
+ n = CX25840_IR_TX_KFIFO_SIZE - kfifo_len(ir_state->tx_kfifo);
+ n = min(n, (unsigned int) count);
+ n /= sizeof(u32);
+
+ /* FIXME - turn on Tx Fifo service interrupt
+ * check hardware fifo level, and other stuff
+ */
+ for (i = 0; i < n; ) {
+ for (j = 0; j < FIFO_TX_DEPTH / 2 && i < n; j++) {
+ mark = ns_pulse[i] & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
+ fifo_pulse[j] = ns_to_pulse_width_count(
+ ns_pulse[i] &
+ ~V4L2_SUBDEV_IR_PULSE_LEVEL_MASK,
+ ir_state->txclk_divider);
+ if (mark)
+ fifo_pulse[j] &= FIFO_RXTX_LVL;
+ i++;
+ }
+ kfifo_put(ir_state->tx_kfifo, (u8 *) fifo_pulse,
+ j * sizeof(u32));
+ }
+ *num = n * sizeof(u32);
+#else
+ /* For now enable the Tx FIFO Service interrupt & pretend we did work */
+ irqenable_tx(sd, IRQEN_TSE);
+ *num = count;
+#endif
+ return 0;
+}
+
+static int cx25840_ir_tx_g_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ mutex_lock(&ir_state->tx_params_lock);
+ memcpy(p, &ir_state->tx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ mutex_unlock(&ir_state->tx_params_lock);
+ return 0;
+}
+
+static int cx25840_ir_tx_shutdown(struct v4l2_subdev *sd)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ c = ir_state->c;
+ mutex_lock(&ir_state->tx_params_lock);
+
+ /* Disable or slow down all IR Tx circuits and counters */
+ irqenable_tx(sd, 0);
+ control_tx_enable(c, false);
+ control_tx_modulation_enable(c, false);
+ cx25840_write4(c, CX25840_IR_TXCLK_REG, TXCLK_TCD);
+
+ ir_state->tx_params.shutdown = true;
+
+ mutex_unlock(&ir_state->tx_params_lock);
+ return 0;
+}
+
+static int cx25840_ir_tx_s_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+ struct i2c_client *c;
+ struct v4l2_subdev_ir_parameters *o;
+ u16 txclk_divider;
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ if (p->shutdown)
+ return cx25840_ir_tx_shutdown(sd);
+
+ if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+ return -ENOSYS;
+
+ c = ir_state->c;
+ o = &ir_state->tx_params;
+ mutex_lock(&ir_state->tx_params_lock);
+
+ o->shutdown = p->shutdown;
+
+ p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ o->mode = p->mode;
+
+ p->bytes_per_data_element = sizeof(u32);
+ o->bytes_per_data_element = p->bytes_per_data_element;
+
+ /* Before we tweak the hardware, we have to disable the transmitter */
+ irqenable_tx(sd, 0);
+ control_tx_enable(c, false);
+
+ control_tx_modulation_enable(c, p->modulation);
+ o->modulation = p->modulation;
+
+ if (p->modulation) {
+ p->carrier_freq = txclk_tx_s_carrier(c, p->carrier_freq,
+ &txclk_divider);
+ o->carrier_freq = p->carrier_freq;
+
+ p->duty_cycle = cduty_tx_s_duty_cycle(c, p->duty_cycle);
+ o->duty_cycle = p->duty_cycle;
+ } else {
+ p->max_pulse_width =
+ txclk_tx_s_max_pulse_width(c, p->max_pulse_width,
+ &txclk_divider);
+ o->max_pulse_width = p->max_pulse_width;
+ }
+ atomic_set(&ir_state->txclk_divider, txclk_divider);
+
+ p->resolution = clock_divider_to_resolution(txclk_divider);
+ o->resolution = p->resolution;
+
+ /* FIXME - make this dependent on resolution for better performance */
+ control_tx_irq_watermark(c, TX_FIFO_HALF_EMPTY);
+
+ control_tx_polarity_invert(c, p->invert_carrier_sense);
+ o->invert_carrier_sense = p->invert_carrier_sense;
+
+ /*
+ * FIXME: we don't have hardware help for IO pin level inversion
+ * here like we have on the CX23888.
+ * Act on this with some mix of logical inversion of data levels,
+ * carrier polarity, and carrier duty cycle.
+ */
+ o->invert_level = p->invert_level;
+
+ o->interrupt_enable = p->interrupt_enable;
+ o->enable = p->enable;
+ if (p->enable) {
+ /* reset tx_fifo here */
+ if (p->interrupt_enable)
+ irqenable_tx(sd, IRQEN_TSE);
+ control_tx_enable(c, p->enable);
+ }
+
+ mutex_unlock(&ir_state->tx_params_lock);
+ return 0;
+}
+
+
+/*
+ * V4L2 Subdevice Core Ops support
+ */
+int cx25840_ir_log_status(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct i2c_client *c = state->c;
+ char *s;
+ int i, j;
+ u32 cntrl, txclk, rxclk, cduty, stats, irqen, filtr;
+
+ /* The CX23888 chip doesn't have an IR controller on the A/V core */
+ if (is_cx23888(state))
+ return 0;
+
+ cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG);
+ txclk = cx25840_read4(c, CX25840_IR_TXCLK_REG) & TXCLK_TCD;
+ rxclk = cx25840_read4(c, CX25840_IR_RXCLK_REG) & RXCLK_RCD;
+ cduty = cx25840_read4(c, CX25840_IR_CDUTY_REG) & CDUTY_CDC;
+ stats = cx25840_read4(c, CX25840_IR_STATS_REG);
+ irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG);
+ if (is_cx23885(state) || is_cx23887(state))
+ irqen ^= IRQEN_MSK;
+ filtr = cx25840_read4(c, CX25840_IR_FILTR_REG) & FILTR_LPF;
+
+ v4l2_info(sd, "IR Receiver:\n");
+ v4l2_info(sd, "\tEnabled: %s\n",
+ cntrl & CNTRL_RXE ? "yes" : "no");
+ v4l2_info(sd, "\tDemodulation from a carrier: %s\n",
+ cntrl & CNTRL_DMD ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO: %s\n",
+ cntrl & CNTRL_RFE ? "enabled" : "disabled");
+ switch (cntrl & CNTRL_EDG) {
+ case CNTRL_EDG_NONE:
+ s = "disabled";
+ break;
+ case CNTRL_EDG_FALL:
+ s = "falling edge";
+ break;
+ case CNTRL_EDG_RISE:
+ s = "rising edge";
+ break;
+ case CNTRL_EDG_BOTH:
+ s = "rising & falling edges";
+ break;
+ default:
+ s = "??? edge";
+ break;
+ }
+ v4l2_info(sd, "\tPulse timers' start/stop trigger: %s\n", s);
+ v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n",
+ cntrl & CNTRL_R ? "not loaded" : "overflow marker");
+ v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
+ cntrl & CNTRL_RIC ? "not empty" : "half full or greater");
+ v4l2_info(sd, "\tLoopback mode: %s\n",
+ cntrl & CNTRL_LBM ? "loopback active" : "normal receive");
+ if (cntrl & CNTRL_DMD) {
+ v4l2_info(sd, "\tExpected carrier (16 clocks): %u Hz\n",
+ clock_divider_to_carrier_freq(rxclk));
+ switch (cntrl & CNTRL_WIN) {
+ case CNTRL_WIN_3_3:
+ i = 3;
+ j = 3;
+ break;
+ case CNTRL_WIN_4_3:
+ i = 4;
+ j = 3;
+ break;
+ case CNTRL_WIN_3_4:
+ i = 3;
+ j = 4;
+ break;
+ case CNTRL_WIN_4_4:
+ i = 4;
+ j = 4;
+ break;
+ default:
+ i = 0;
+ j = 0;
+ break;
+ }
+ v4l2_info(sd, "\tNext carrier edge window: 16 clocks "
+ "-%1d/+%1d, %u to %u Hz\n", i, j,
+ clock_divider_to_freq(rxclk, 16 + j),
+ clock_divider_to_freq(rxclk, 16 - i));
+ } else {
+ v4l2_info(sd, "\tMax measurable pulse width: %u us, "
+ "%llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, rxclk),
+ pulse_width_count_to_ns(FIFO_RXTX, rxclk));
+ }
+ v4l2_info(sd, "\tLow pass filter: %s\n",
+ filtr ? "enabled" : "disabled");
+ if (filtr)
+ v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, "
+ "%u ns\n",
+ lpf_count_to_us(filtr),
+ lpf_count_to_ns(filtr));
+ v4l2_info(sd, "\tPulse width timer timed-out: %s\n",
+ stats & STATS_RTO ? "yes" : "no");
+ v4l2_info(sd, "\tPulse width timer time-out intr: %s\n",
+ irqen & IRQEN_RTE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO overrun: %s\n",
+ stats & STATS_ROR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO overrun interrupt: %s\n",
+ irqen & IRQEN_ROE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tBusy: %s\n",
+ stats & STATS_RBY ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service requested: %s\n",
+ stats & STATS_RSR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service request interrupt: %s\n",
+ irqen & IRQEN_RSE ? "enabled" : "disabled");
+
+ v4l2_info(sd, "IR Transmitter:\n");
+ v4l2_info(sd, "\tEnabled: %s\n",
+ cntrl & CNTRL_TXE ? "yes" : "no");
+ v4l2_info(sd, "\tModulation onto a carrier: %s\n",
+ cntrl & CNTRL_MOD ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO: %s\n",
+ cntrl & CNTRL_TFE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
+ cntrl & CNTRL_TIC ? "not empty" : "half full or less");
+ v4l2_info(sd, "\tCarrier polarity: %s\n",
+ cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+ : "space:noburst mark:burst");
+ if (cntrl & CNTRL_MOD) {
+ v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n",
+ clock_divider_to_carrier_freq(txclk));
+ v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n",
+ cduty + 1);
+ } else {
+ v4l2_info(sd, "\tMax pulse width: %u us, "
+ "%llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, txclk),
+ pulse_width_count_to_ns(FIFO_RXTX, txclk));
+ }
+ v4l2_info(sd, "\tBusy: %s\n",
+ stats & STATS_TBY ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service requested: %s\n",
+ stats & STATS_TSR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service request interrupt: %s\n",
+ irqen & IRQEN_TSE ? "enabled" : "disabled");
+
+ return 0;
+}
+
+
+const struct v4l2_subdev_ir_ops cx25840_ir_ops = {
+ .rx_read = cx25840_ir_rx_read,
+ .rx_g_parameters = cx25840_ir_rx_g_parameters,
+ .rx_s_parameters = cx25840_ir_rx_s_parameters,
+
+ .tx_write = cx25840_ir_tx_write,
+ .tx_g_parameters = cx25840_ir_tx_g_parameters,
+ .tx_s_parameters = cx25840_ir_tx_s_parameters,
+};
+
+
+static const struct v4l2_subdev_ir_parameters default_rx_params = {
+ .bytes_per_data_element = sizeof(u32),
+ .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+ .enable = false,
+ .interrupt_enable = false,
+ .shutdown = true,
+
+ .modulation = true,
+ .carrier_freq = 36000, /* 36 kHz - RC-5, and RC-6 carrier */
+
+ /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+ /* RC-6: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+ .noise_filter_min_width = 333333, /* ns */
+ .carrier_range_lower = 35000,
+ .carrier_range_upper = 37000,
+ .invert_level = false,
+};
+
+static const struct v4l2_subdev_ir_parameters default_tx_params = {
+ .bytes_per_data_element = sizeof(u32),
+ .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+ .enable = false,
+ .interrupt_enable = false,
+ .shutdown = true,
+
+ .modulation = true,
+ .carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
+ .duty_cycle = 25, /* 25 % - RC-5 carrier */
+ .invert_level = false,
+ .invert_carrier_sense = false,
+};
+
+int cx25840_ir_probe(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct cx25840_ir_state *ir_state;
+ struct v4l2_subdev_ir_parameters default_params;
+
+ /* Only init the IR controller for the CX2388[57] AV Core for now */
+ if (!(is_cx23885(state) || is_cx23887(state)))
+ return 0;
+
+ ir_state = kzalloc(sizeof(struct cx25840_ir_state), GFP_KERNEL);
+ if (ir_state == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&ir_state->rx_kfifo_lock);
+ if (kfifo_alloc(&ir_state->rx_kfifo,
+ CX25840_IR_RX_KFIFO_SIZE, GFP_KERNEL)) {
+ kfree(ir_state);
+ return -ENOMEM;
+ }
+
+ ir_state->c = state->c;
+ state->ir_state = ir_state;
+
+ /* Ensure no interrupts arrive yet */
+ if (is_cx23885(state) || is_cx23887(state))
+ cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, IRQEN_MSK);
+ else
+ cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, 0);
+
+ mutex_init(&ir_state->rx_params_lock);
+ memcpy(&default_params, &default_rx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params);
+
+ mutex_init(&ir_state->tx_params_lock);
+ memcpy(&default_params, &default_tx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
+
+ return 0;
+}
+
+int cx25840_ir_remove(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct cx25840_ir_state *ir_state = to_ir_state(sd);
+
+ if (ir_state == NULL)
+ return -ENODEV;
+
+ cx25840_ir_rx_shutdown(sd);
+ cx25840_ir_tx_shutdown(sd);
+
+ kfifo_free(&ir_state->rx_kfifo);
+ kfree(ir_state);
+ state->ir_state = NULL;
+ return 0;
+}
--
GitLab
From d6b1850d3c49e66f17bbb67f964a48b11528f56b Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 18 Jul 2010 23:26:29 -0300
Subject: [PATCH 450/863] V4L/DVB: cx23885: Add a v4l2_subdev group id for the
CX2388[578] integrated AV core
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-cards.c | 5 ++++-
drivers/media/video/cx23885/cx23885.h | 3 ++-
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index e9586743692bb..b083e5dfb715b 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -1192,7 +1192,10 @@ void cx23885_card_setup(struct cx23885_dev *dev)
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
- v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
+ if (dev->sd_cx25840) {
+ dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
+ v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
+ }
break;
}
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index a33f2b71467bc..460f430d028f2 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -403,7 +403,8 @@ static inline struct cx23885_dev *to_cx23885(struct v4l2_device *v4l2_dev)
#define call_all(dev, o, f, args...) \
v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args)
-#define CX23885_HW_888_IR (1 << 0)
+#define CX23885_HW_888_IR (1 << 0)
+#define CX23885_HW_AV_CORE (1 << 1)
#define call_hw(dev, grpid, o, f, args...) \
v4l2_device_call_all(&dev->v4l2_dev, grpid, o, f, ##args)
--
GitLab
From 98d109f90fc02ce8baf1c2471ffcf8d66fb0d8e6 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Mon, 19 Jul 2010 00:41:41 -0300
Subject: [PATCH 451/863] V4L/DVB: cx23885: Add preliminary IR Rx support for
the HVR-1250 and TeVii S470
Add initial IR Rx support using the intergrated IR controller in the
A/V core of the CX23885 bridge chip.
This initial support is flawed in that I2C transactions should not
be performed in a hard irq context. That will be fixed in a
follow on patch.
The TeVii S470 support is reported to generate perptual interrupts
that renders a user' system nearly unusable. The TeVii S470 IR
will be disabled by default in a follow on patch.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-cards.c | 52 +++++++++++++++++++--
drivers/media/video/cx23885/cx23885-core.c | 22 +++++++--
drivers/media/video/cx23885/cx23885-input.c | 46 +++++++++++++++++-
drivers/media/video/cx23885/cx23885-reg.h | 1 +
4 files changed, 111 insertions(+), 10 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index b083e5dfb715b..294a7530caf7b 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -962,7 +962,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
int cx23885_ir_init(struct cx23885_dev *dev)
{
- static struct v4l2_subdev_io_pin_config ir_pin_cfg[] = {
+ static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
{
.flags = V4L2_SUBDEV_IO_PIN_INPUT,
.pin = CX23885_PIN_IR_RX_GPIO19,
@@ -977,12 +977,22 @@ int cx23885_ir_init(struct cx23885_dev *dev)
.strength = CX25840_PIN_DRIVE_MEDIUM,
}
};
- const size_t ir_pin_cfg_count = ARRAY_SIZE(ir_pin_cfg);
+ const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg);
+
+ static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
+ {
+ .flags = V4L2_SUBDEV_IO_PIN_INPUT,
+ .pin = CX23885_PIN_IR_RX_GPIO19,
+ .function = CX23885_PAD_IR_RX,
+ .value = 0,
+ .strength = CX25840_PIN_DRIVE_MEDIUM,
+ }
+ };
+ const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg);
struct v4l2_subdev_ir_parameters params;
int ret = 0;
switch (dev->board) {
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
@@ -1001,7 +1011,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
- ir_pin_cfg_count, ir_pin_cfg);
+ ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
dev->pci_irqmask |= PCI_MSK_IR;
/*
* For these boards we need to invert the Tx output via the
@@ -1015,6 +1025,26 @@ int cx23885_ir_init(struct cx23885_dev *dev)
params.shutdown = true;
v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
break;
+ case CX23885_BOARD_TEVII_S470:
+ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+ if (dev->sd_ir == NULL) {
+ ret = -ENODEV;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+ dev->pci_irqmask |= PCI_MSK_AV_CORE;
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+ if (dev->sd_ir == NULL) {
+ ret = -ENODEV;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
+ dev->pci_irqmask |= PCI_MSK_AV_CORE;
+ break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
request_module("ir-kbd-i2c");
break;
@@ -1033,6 +1063,13 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
cx23888_ir_remove(dev);
dev->sd_ir = NULL;
break;
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ dev->pci_irqmask &= ~PCI_MSK_AV_CORE;
+ cx_clear(PCI_INT_MSK, PCI_MSK_AV_CORE);
+ /* sd_ir is a duplicate pointer to the AV Core, just clear it */
+ dev->sd_ir = NULL;
+ break;
}
}
@@ -1044,6 +1081,11 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_IR))
cx_set(PCI_INT_MSK, PCI_MSK_IR);
break;
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_AV_CORE))
+ cx_set(PCI_INT_MSK, PCI_MSK_AV_CORE);
+ break;
}
}
@@ -1189,6 +1231,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index a74c0ab859ed0..93e7afb98889c 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1650,7 +1650,7 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
u32 ts1_status, ts1_mask;
u32 ts2_status, ts2_mask;
int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0;
- bool ir_handled = false;
+ bool subdev_handled;
pci_status = cx_read(PCI_INT_STAT);
pci_mask = cx_read(PCI_INT_MSK);
@@ -1681,7 +1681,7 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
PCI_MSK_VID_C | PCI_MSK_VID_B | PCI_MSK_VID_A |
PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT |
PCI_MSK_GPIO0 | PCI_MSK_GPIO1 |
- PCI_MSK_IR)) {
+ PCI_MSK_AV_CORE | PCI_MSK_IR)) {
if (pci_status & PCI_MSK_RISC_RD)
dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n",
@@ -1731,6 +1731,10 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n",
PCI_MSK_GPIO1);
+ if (pci_status & PCI_MSK_AV_CORE)
+ dprintk(7, " (PCI_MSK_AV_CORE 0x%08x)\n",
+ PCI_MSK_AV_CORE);
+
if (pci_status & PCI_MSK_IR)
dprintk(7, " (PCI_MSK_IR 0x%08x)\n",
PCI_MSK_IR);
@@ -1765,9 +1769,19 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
handled += cx23885_video_irq(dev, vida_status);
if (pci_status & PCI_MSK_IR) {
+ subdev_handled = false;
v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine,
- pci_status, &ir_handled);
- if (ir_handled)
+ pci_status, &subdev_handled);
+ if (subdev_handled)
+ handled++;
+ }
+
+ if (pci_status & PCI_MSK_AV_CORE) {
+ subdev_handled = false;
+ v4l2_subdev_call(dev->sd_cx25840,
+ core, interrupt_service_routine,
+ pci_status, &subdev_handled);
+ if (subdev_handled)
handled++;
}
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 496d751ffdc86..3f924e21b9575 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -99,8 +99,10 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
/*
- * The only board we handle right now. However other boards
+ * The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
*/
break;
@@ -148,6 +150,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
@@ -172,6 +175,37 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
*/
params.invert_level = true;
break;
+ case CX23885_BOARD_TEVII_S470:
+ /*
+ * The IR controller on this board only returns pulse widths.
+ * Any other mode setting will fail to set up the device.
+ */
+ params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ params.enable = true;
+ params.interrupt_enable = true;
+ params.shutdown = false;
+
+ /* Setup for a standard NEC protocol */
+ params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */
+ params.carrier_range_lower = 33000; /* Hz */
+ params.carrier_range_upper = 43000; /* Hz */
+ params.duty_cycle = 33; /* percent, 33 percent for NEC */
+
+ /*
+ * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units
+ * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns
+ */
+ params.max_pulse_width = 12378022; /* ns */
+
+ /*
+ * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit
+ * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns
+ */
+ params.noise_filter_min_width = 351648; /* ns */
+
+ params.modulation = false;
+ params.invert_level = true;
+ break;
}
v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
return 0;
@@ -244,12 +278,20 @@ int cx23885_input_init(struct cx23885_dev *dev)
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
- /* Integrated CX23888 IR controller */
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ /* Integrated CX2388[58] IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = IR_TYPE_ALL;
/* The grey Hauppauge RC-5 remote */
rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
break;
+ case CX23885_BOARD_TEVII_S470:
+ /* Integrated CX23885 IR controller */
+ driver_type = RC_DRIVER_IR_RAW;
+ allowed_protos = IR_TYPE_ALL;
+ /* A guess at the remote */
+ rc_map = RC_MAP_TEVII_NEC;
+ break;
default:
return -ENODEV;
}
diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h
index c0bc9a068954b..a28772db11f0e 100644
--- a/drivers/media/video/cx23885/cx23885-reg.h
+++ b/drivers/media/video/cx23885/cx23885-reg.h
@@ -213,6 +213,7 @@ Channel manager Data Structure entry = 20 DWORD
#define DEV_CNTRL2 0x00040000
#define PCI_MSK_IR (1 << 28)
+#define PCI_MSK_AV_CORE (1 << 27)
#define PCI_MSK_GPIO1 (1 << 24)
#define PCI_MSK_GPIO0 (1 << 23)
#define PCI_MSK_APB_DMA (1 << 12)
--
GitLab
From dbe83a3b921328e12b2abe894fc692afba293d7f Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Mon, 19 Jul 2010 01:19:43 -0300
Subject: [PATCH 452/863] V4L/DVB: cx23885: Protect PCI interrupt mask
manipulations with a spinlock
This patch encapsulates access to the PCI_INT_MSK register and
dev->pci_irqmask variable and protects them with a spinlock.
This is needed because both the hard IRQ handler and a workhandler
will need to manipulate the mask to disable the AV_CORE interrupt.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-cards.c | 17 ++--
drivers/media/video/cx23885/cx23885-core.c | 94 +++++++++++++++++++--
drivers/media/video/cx23885/cx23885-vbi.c | 2 +-
drivers/media/video/cx23885/cx23885-video.c | 7 +-
drivers/media/video/cx23885/cx23885.h | 5 ++
5 files changed, 103 insertions(+), 22 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 294a7530caf7b..d72b48ef940e7 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -1012,7 +1012,6 @@ int cx23885_ir_init(struct cx23885_dev *dev)
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
- dev->pci_irqmask |= PCI_MSK_IR;
/*
* For these boards we need to invert the Tx output via the
* IR controller to have the LED off while idle
@@ -1033,7 +1032,6 @@ int cx23885_ir_init(struct cx23885_dev *dev)
}
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
ir_rx_pin_cfg_count, ir_rx_pin_cfg);
- dev->pci_irqmask |= PCI_MSK_AV_CORE;
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1043,7 +1041,6 @@ int cx23885_ir_init(struct cx23885_dev *dev)
}
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
- dev->pci_irqmask |= PCI_MSK_AV_CORE;
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
request_module("ir-kbd-i2c");
@@ -1058,15 +1055,13 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
- dev->pci_irqmask &= ~PCI_MSK_IR;
- cx_clear(PCI_INT_MSK, PCI_MSK_IR);
+ cx23885_irq_remove(dev, PCI_MSK_IR);
cx23888_ir_remove(dev);
dev->sd_ir = NULL;
break;
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
- dev->pci_irqmask &= ~PCI_MSK_AV_CORE;
- cx_clear(PCI_INT_MSK, PCI_MSK_AV_CORE);
+ cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
break;
@@ -1078,13 +1073,13 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
- if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_IR))
- cx_set(PCI_INT_MSK, PCI_MSK_IR);
+ if (dev->sd_ir)
+ cx23885_irq_add_enable(dev, PCI_MSK_IR);
break;
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
- if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_AV_CORE))
- cx_set(PCI_INT_MSK, PCI_MSK_AV_CORE);
+ if (dev->sd_ir)
+ cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
}
}
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 93e7afb98889c..0765abf4e42ea 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -299,6 +299,83 @@ static struct sram_channel cx23887_sram_channels[] = {
},
};
+void cx23885_irq_add(struct cx23885_dev *dev, u32 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ dev->pci_irqmask |= mask;
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ dev->pci_irqmask |= mask;
+ cx_set(PCI_INT_MSK, mask);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask)
+{
+ u32 v;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ v = mask & dev->pci_irqmask;
+ if (v)
+ cx_set(PCI_INT_MSK, v);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_enable_all(struct cx23885_dev *dev)
+{
+ cx23885_irq_enable(dev, 0xffffffff);
+}
+
+void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ cx_clear(PCI_INT_MSK, mask);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_disable_all(struct cx23885_dev *dev)
+{
+ cx23885_irq_disable(dev, 0xffffffff);
+}
+
+void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ dev->pci_irqmask &= ~mask;
+ cx_clear(PCI_INT_MSK, mask);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static u32 cx23885_irq_get_mask(struct cx23885_dev *dev)
+{
+ u32 v;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+ v = cx_read(PCI_INT_MSK);
+
+ spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+ return v;
+}
+
static int cx23885_risc_decode(u32 risc)
{
static char *instr[16] = {
@@ -548,7 +625,7 @@ static void cx23885_shutdown(struct cx23885_dev *dev)
cx_write(UART_CTL, 0);
/* Disable Interrupts */
- cx_write(PCI_INT_MSK, 0);
+ cx23885_irq_disable_all(dev);
cx_write(VID_A_INT_MSK, 0);
cx_write(VID_B_INT_MSK, 0);
cx_write(VID_C_INT_MSK, 0);
@@ -774,6 +851,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
{
int i;
+ spin_lock_init(&dev->pci_irqmask_lock);
+
mutex_init(&dev->lock);
mutex_init(&dev->gpio_lock);
@@ -820,9 +899,9 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
dev->pci_bus = dev->pci->bus->number;
dev->pci_slot = PCI_SLOT(dev->pci->devfn);
- dev->pci_irqmask = 0x001f00;
+ cx23885_irq_add(dev, 0x001f00);
if (cx23885_boards[dev->board].cimax > 0)
- dev->pci_irqmask |= 0x01800000; /* for CiMaxes */
+ cx23885_irq_add(dev, 0x01800000); /* for CiMaxes */
/* External Master 1 Bus */
dev->i2c_bus[0].nr = 0;
@@ -1156,7 +1235,7 @@ static void cx23885_tsport_reg_dump(struct cx23885_tsport *port)
dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __func__,
cx_read(DEV_CNTRL2));
dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __func__,
- cx_read(PCI_INT_MSK));
+ cx23885_irq_get_mask(dev));
dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __func__,
cx_read(AUDIO_INT_INT_MSK));
dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __func__,
@@ -1292,7 +1371,8 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
cx_set(port->reg_ts_int_msk, port->ts_int_msk_val);
cx_set(port->reg_dma_ctl, port->dma_ctl_val);
- cx_set(PCI_INT_MSK, dev->pci_irqmask | port->pci_irqmask);
+ cx23885_irq_add(dev, port->pci_irqmask);
+ cx23885_irq_enable_all(dev);
break;
default:
BUG();
@@ -1653,7 +1733,7 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
bool subdev_handled;
pci_status = cx_read(PCI_INT_STAT);
- pci_mask = cx_read(PCI_INT_MSK);
+ pci_mask = cx23885_irq_get_mask(dev);
vida_status = cx_read(VID_A_INT_STAT);
vida_mask = cx_read(VID_A_INT_MSK);
ts1_status = cx_read(VID_B_INT_STAT);
@@ -1981,7 +2061,7 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
switch (dev->board) {
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
- cx_set(PCI_INT_MSK, 0x01800000); /* for NetUP */
+ cx23885_irq_add_enable(dev, 0x01800000); /* for NetUP */
break;
}
diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c
index 708a8c766d1ad..c0b60382ad136 100644
--- a/drivers/media/video/cx23885/cx23885-vbi.c
+++ b/drivers/media/video/cx23885/cx23885-vbi.c
@@ -74,7 +74,7 @@ static int cx23885_start_vbi_dma(struct cx23885_dev *dev,
q->count = 1;
/* enable irqs */
- cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | 0x01);
+ cx23885_irq_add_enable(dev, 0x01);
cx_set(VID_A_INT_MSK, 0x000022);
/* start dma */
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 25194553c5299..da66e5f8d91d1 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -441,7 +441,7 @@ static int cx23885_start_video_dma(struct cx23885_dev *dev,
q->count = 1;
/* enable irq */
- cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | 0x01);
+ cx23885_irq_add_enable(dev, 0x01);
cx_set(VID_A_INT_MSK, 0x000011);
/* start dma */
@@ -1465,7 +1465,7 @@ static const struct v4l2_file_operations radio_fops = {
void cx23885_video_unregister(struct cx23885_dev *dev)
{
dprintk(1, "%s()\n", __func__);
- cx_clear(PCI_INT_MSK, 1);
+ cx23885_irq_remove(dev, 0x01);
if (dev->video_dev) {
if (video_is_registered(dev->video_dev))
@@ -1502,7 +1502,8 @@ int cx23885_video_register(struct cx23885_dev *dev)
VID_A_DMA_CTL, 0x11, 0x00);
/* Don't enable VBI yet */
- cx_set(PCI_INT_MSK, 1);
+
+ cx23885_irq_add_enable(dev, 0x01);
if (TUNER_ABSENT != dev->tuner_type) {
struct v4l2_subdev *sd = NULL;
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 460f430d028f2..5bf6ed09c9708 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -325,6 +325,7 @@ struct cx23885_dev {
u32 __iomem *lmmio;
u8 __iomem *bmmio;
int pci_irqmask;
+ spinlock_t pci_irqmask_lock; /* protects mask reg too */
int hwrevision;
/* This valud is board specific and is used to configure the
@@ -485,6 +486,10 @@ extern u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask);
extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask,
int asoutput);
+extern void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask);
/* ----------------------------------------------------------- */
/* cx23885-cards.c */
--
GitLab
From e5514f104d875b3d28cbcd5d4f2b96ab2fca1e29 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Mon, 19 Jul 2010 01:35:46 -0300
Subject: [PATCH 453/863] V4L/DVB: cx23885: Move AV Core irq handling to a work
handler
Interrupts from the AV Core are best handled by a workqueue handler
since many I2C transactions are required to service the AV Core
interrupt. The AV_CORE PCI interrupt is disabled by the IRQ handler
and reenabled when the work handler is finished.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/Makefile | 5 ++--
drivers/media/video/cx23885/cx23885-av.c | 35 ++++++++++++++++++++++
drivers/media/video/cx23885/cx23885-av.h | 27 +++++++++++++++++
drivers/media/video/cx23885/cx23885-core.c | 20 +++++++------
drivers/media/video/cx23885/cx23885-ir.c | 24 ++++++++++++---
drivers/media/video/cx23885/cx23885.h | 1 +
6 files changed, 97 insertions(+), 15 deletions(-)
create mode 100644 drivers/media/video/cx23885/cx23885-av.c
create mode 100644 drivers/media/video/cx23885/cx23885-av.h
diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile
index 5787ae243631f..e2ee95f660d87 100644
--- a/drivers/media/video/cx23885/Makefile
+++ b/drivers/media/video/cx23885/Makefile
@@ -1,7 +1,8 @@
cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \
cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
- cx23885-ioctl.o cx23885-ir.o cx23885-input.o cx23888-ir.o \
- netup-init.o cimax2.o netup-eeprom.o cx23885-f300.o
+ cx23885-ioctl.o cx23885-ir.o cx23885-av.o cx23885-input.o \
+ cx23888-ir.o netup-init.o cimax2.o netup-eeprom.o \
+ cx23885-f300.o
obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
diff --git a/drivers/media/video/cx23885/cx23885-av.c b/drivers/media/video/cx23885/cx23885-av.c
new file mode 100644
index 0000000000000..134ebddd860fe
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-av.c
@@ -0,0 +1,35 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * AV device support routines - non-input, non-vl42_subdev routines
+ *
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "cx23885.h"
+
+void cx23885_av_work_handler(struct work_struct *work)
+{
+ struct cx23885_dev *dev =
+ container_of(work, struct cx23885_dev, cx25840_work);
+ bool handled;
+
+ v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine,
+ PCI_MSK_AV_CORE, &handled);
+ cx23885_irq_enable(dev, PCI_MSK_AV_CORE);
+}
diff --git a/drivers/media/video/cx23885/cx23885-av.h b/drivers/media/video/cx23885/cx23885-av.h
new file mode 100644
index 0000000000000..d2915c3e53a29
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-av.h
@@ -0,0 +1,27 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * AV device support routines - non-input, non-vl42_subdev routines
+ *
+ * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _CX23885_AV_H_
+#define _CX23885_AV_H_
+void cx23885_av_work_handler(struct work_struct *work);
+#endif
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 0765abf4e42ea..f6b62e7398afa 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -34,6 +34,7 @@
#include "cimax2.h"
#include "cx23888-ir.h"
#include "cx23885-ir.h"
+#include "cx23885-av.h"
#include "cx23885-input.h"
MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
@@ -1856,13 +1857,13 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
handled++;
}
- if (pci_status & PCI_MSK_AV_CORE) {
- subdev_handled = false;
- v4l2_subdev_call(dev->sd_cx25840,
- core, interrupt_service_routine,
- pci_status, &subdev_handled);
- if (subdev_handled)
- handled++;
+ if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) {
+ cx23885_irq_disable(dev, PCI_MSK_AV_CORE);
+ if (!schedule_work(&dev->cx25840_work))
+ printk(KERN_ERR "%s: failed to set up deferred work for"
+ " AV Core/IR interrupt. Interrupt is disabled"
+ " and won't be re-enabled\n", dev->name);
+ handled++;
}
if (handled)
@@ -1882,11 +1883,11 @@ static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd,
dev = to_cx23885(sd->v4l2_dev);
switch (notification) {
- case V4L2_SUBDEV_IR_RX_NOTIFY: /* Called in an IRQ context */
+ case V4L2_SUBDEV_IR_RX_NOTIFY: /* Possibly called in an IRQ context */
if (sd == dev->sd_ir)
cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg);
break;
- case V4L2_SUBDEV_IR_TX_NOTIFY: /* Called in an IRQ context */
+ case V4L2_SUBDEV_IR_TX_NOTIFY: /* Possibly called in an IRQ context */
if (sd == dev->sd_ir)
cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg);
break;
@@ -1895,6 +1896,7 @@ static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd,
static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev)
{
+ INIT_WORK(&dev->cx25840_work, cx23885_av_work_handler);
INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler);
INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler);
dev->v4l2_dev.notify = cx23885_v4l2_dev_notify;
diff --git a/drivers/media/video/cx23885/cx23885-ir.c b/drivers/media/video/cx23885/cx23885-ir.c
index 6ceabd4fba07b..7125247dd2555 100644
--- a/drivers/media/video/cx23885/cx23885-ir.c
+++ b/drivers/media/video/cx23885/cx23885-ir.c
@@ -72,7 +72,7 @@ void cx23885_ir_tx_work_handler(struct work_struct *work)
}
-/* Called in an IRQ context */
+/* Possibly called in an IRQ context */
void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
{
struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
@@ -86,10 +86,18 @@ void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
set_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications);
if (events & V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN)
set_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications);
- schedule_work(&dev->ir_rx_work);
+
+ /*
+ * For the integrated AV core, we are already in a workqueue context.
+ * For the CX23888 integrated IR, we are in an interrupt context.
+ */
+ if (sd == dev->sd_cx25840)
+ cx23885_ir_rx_work_handler(&dev->ir_rx_work);
+ else
+ schedule_work(&dev->ir_rx_work);
}
-/* Called in an IRQ context */
+/* Possibly called in an IRQ context */
void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
{
struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
@@ -97,5 +105,13 @@ void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
if (events & V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ)
set_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications);
- schedule_work(&dev->ir_tx_work);
+
+ /*
+ * For the integrated AV core, we are already in a workqueue context.
+ * For the CX23888 integrated IR, we are in an interrupt context.
+ */
+ if (sd == dev->sd_cx25840)
+ cx23885_ir_tx_work_handler(&dev->ir_tx_work);
+ else
+ schedule_work(&dev->ir_tx_work);
}
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 5bf6ed09c9708..ed94b17dd8a5c 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -366,6 +366,7 @@ struct cx23885_dev {
unsigned char radio_addr;
unsigned int has_radio;
struct v4l2_subdev *sd_cx25840;
+ struct work_struct cx25840_work;
/* Infrared */
struct v4l2_subdev *sd_ir;
--
GitLab
From fa647f249fa3399b8c90e2c4a07459c5d7976ffe Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Mon, 19 Jul 2010 21:22:05 -0300
Subject: [PATCH 454/863] V4L/DVB: cx23885: Require user to explicitly enable
CX2388[57] IR via module param
The CX23885 IR controller was reported to cause an interrupt storm
on a TeVii S470 card, but was reported fine on an HVR-1250. Keep
integrated IR disabled by default on CX2388[57] based cards to avoid
a bad user experience in the general case.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-cards.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index d72b48ef940e7..e76ce8709afd2 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -30,6 +30,16 @@
#include "netup-init.h"
#include "cx23888-ir.h"
+static unsigned int enable_885_ir;
+module_param(enable_885_ir, int, 0644);
+MODULE_PARM_DESC(enable_885_ir,
+ "Enable integrated IR controller for supported\n"
+ "\t\t CX2388[57] boards that are wired for it:\n"
+ "\t\t\tHVR-1250 (reported safe)\n"
+ "\t\t\tTeVii S470 (reported unsafe)\n"
+ "\t\t This can cause an interrupt storm with some cards.\n"
+ "\t\t Default: 0 [Disabled]");
+
/* ------------------------------------------------------------------ */
/* board config info */
@@ -1025,6 +1035,8 @@ int cx23885_ir_init(struct cx23885_dev *dev)
v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
break;
case CX23885_BOARD_TEVII_S470:
+ if (!enable_885_ir)
+ break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
if (dev->sd_ir == NULL) {
ret = -ENODEV;
@@ -1034,6 +1046,8 @@ int cx23885_ir_init(struct cx23885_dev *dev)
ir_rx_pin_cfg_count, ir_rx_pin_cfg);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ if (!enable_885_ir)
+ break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
if (dev->sd_ir == NULL) {
ret = -ENODEV;
@@ -1214,6 +1228,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
* loaded, ensure this happens.
*/
switch (dev->board) {
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ /* Currently only enabled for the integrated IR controller */
+ if (!enable_885_ir)
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
@@ -1226,8 +1245,6 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
- case CX23885_BOARD_TEVII_S470:
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
--
GitLab
From 0c82a8fb5a306eac83d536445a77b6523c71d5e4 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Wed, 28 Jul 2010 23:48:24 -0300
Subject: [PATCH 455/863] V4L/DVB: cx23885: Change Kconfig dependencies to new
IR_CORE functions
This driver no longer depends on the old IR functions selected by
VIDEO_IR.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index bcdda9a9aa962..768f000e4b21e 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -5,7 +5,7 @@ config VIDEO_CX23885
select VIDEO_BTCX
select VIDEO_TUNER
select VIDEO_TVEEPROM
- select VIDEO_IR
+ select IR_CORE
select VIDEOBUF_DVB
select VIDEOBUF_DMA_SG
select VIDEO_CX25840
--
GitLab
From ceb152add687db152d90ba64b54687b3975963cf Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sat, 31 Jul 2010 21:57:42 -0300
Subject: [PATCH 456/863] V4L/DVB: cx23885, cx25840: Report IR max pulse width
regardless of mod/demod use
Compute and report the maximum IR pulse measurment width, even
if we are set to perform carrier modulation or demodulation and
the number is fixed by the carrier freq.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23888-ir.c | 26 +++++++++++++-----------
drivers/media/video/cx25840/cx25840-ir.c | 26 +++++++++++++-----------
2 files changed, 28 insertions(+), 24 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index 51f21636e6393..aa07286b8d9ba 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -771,12 +771,15 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
&p->carrier_range_upper);
o->carrier_range_lower = p->carrier_range_lower;
o->carrier_range_upper = p->carrier_range_upper;
+
+ p->max_pulse_width =
+ (u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
} else {
p->max_pulse_width =
rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width,
&rxclk_divider);
- o->max_pulse_width = p->max_pulse_width;
}
+ o->max_pulse_width = p->max_pulse_width;
atomic_set(&state->rxclk_divider, rxclk_divider);
p->noise_filter_min_width =
@@ -889,12 +892,15 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle);
o->duty_cycle = p->duty_cycle;
+
+ p->max_pulse_width =
+ (u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
} else {
p->max_pulse_width =
txclk_tx_s_max_pulse_width(dev, p->max_pulse_width,
&txclk_divider);
- o->max_pulse_width = p->max_pulse_width;
}
+ o->max_pulse_width = p->max_pulse_width;
atomic_set(&state->txclk_divider, txclk_divider);
p->resolution = clock_divider_to_resolution(txclk_divider);
@@ -1000,12 +1006,10 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
"-%1d/+%1d, %u to %u Hz\n", i, j,
clock_divider_to_freq(rxclk, 16 + j),
clock_divider_to_freq(rxclk, 16 - i));
- } else {
- v4l2_info(sd, "\tMax measurable pulse width: %u us, "
- "%llu ns\n",
- pulse_width_count_to_us(FIFO_RXTX, rxclk),
- pulse_width_count_to_ns(FIFO_RXTX, rxclk));
}
+ v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, rxclk),
+ pulse_width_count_to_ns(FIFO_RXTX, rxclk));
v4l2_info(sd, "\tLow pass filter: %s\n",
filtr ? "enabled" : "disabled");
if (filtr)
@@ -1047,12 +1051,10 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
clock_divider_to_carrier_freq(txclk));
v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n",
cduty + 1);
- } else {
- v4l2_info(sd, "\tMax pulse width: %u us, "
- "%llu ns\n",
- pulse_width_count_to_us(FIFO_RXTX, txclk),
- pulse_width_count_to_ns(FIFO_RXTX, txclk));
}
+ v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, txclk),
+ pulse_width_count_to_ns(FIFO_RXTX, txclk));
v4l2_info(sd, "\tBusy: %s\n",
stats & STATS_TBY ? "yes" : "no");
v4l2_info(sd, "\tFIFO service requested: %s\n",
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index 308e87e9fae72..326c2554c05c5 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -791,12 +791,15 @@ static int cx25840_ir_rx_s_parameters(struct v4l2_subdev *sd,
&p->carrier_range_upper);
o->carrier_range_lower = p->carrier_range_lower;
o->carrier_range_upper = p->carrier_range_upper;
+
+ p->max_pulse_width =
+ (u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
} else {
p->max_pulse_width =
rxclk_rx_s_max_pulse_width(c, p->max_pulse_width,
&rxclk_divider);
- o->max_pulse_width = p->max_pulse_width;
}
+ o->max_pulse_width = p->max_pulse_width;
atomic_set(&ir_state->rxclk_divider, rxclk_divider);
p->noise_filter_min_width =
@@ -970,12 +973,15 @@ static int cx25840_ir_tx_s_parameters(struct v4l2_subdev *sd,
p->duty_cycle = cduty_tx_s_duty_cycle(c, p->duty_cycle);
o->duty_cycle = p->duty_cycle;
+
+ p->max_pulse_width =
+ (u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
} else {
p->max_pulse_width =
txclk_tx_s_max_pulse_width(c, p->max_pulse_width,
&txclk_divider);
- o->max_pulse_width = p->max_pulse_width;
}
+ o->max_pulse_width = p->max_pulse_width;
atomic_set(&ir_state->txclk_divider, txclk_divider);
p->resolution = clock_divider_to_resolution(txclk_divider);
@@ -1094,12 +1100,10 @@ int cx25840_ir_log_status(struct v4l2_subdev *sd)
"-%1d/+%1d, %u to %u Hz\n", i, j,
clock_divider_to_freq(rxclk, 16 + j),
clock_divider_to_freq(rxclk, 16 - i));
- } else {
- v4l2_info(sd, "\tMax measurable pulse width: %u us, "
- "%llu ns\n",
- pulse_width_count_to_us(FIFO_RXTX, rxclk),
- pulse_width_count_to_ns(FIFO_RXTX, rxclk));
}
+ v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, rxclk),
+ pulse_width_count_to_ns(FIFO_RXTX, rxclk));
v4l2_info(sd, "\tLow pass filter: %s\n",
filtr ? "enabled" : "disabled");
if (filtr)
@@ -1139,12 +1143,10 @@ int cx25840_ir_log_status(struct v4l2_subdev *sd)
clock_divider_to_carrier_freq(txclk));
v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n",
cduty + 1);
- } else {
- v4l2_info(sd, "\tMax pulse width: %u us, "
- "%llu ns\n",
- pulse_width_count_to_us(FIFO_RXTX, txclk),
- pulse_width_count_to_ns(FIFO_RXTX, txclk));
}
+ v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, txclk),
+ pulse_width_count_to_ns(FIFO_RXTX, txclk));
v4l2_info(sd, "\tBusy: %s\n",
stats & STATS_TBY ? "yes" : "no");
v4l2_info(sd, "\tFIFO service requested: %s\n",
--
GitLab
From 2560d94e330f35776e944b54256a526a19259429 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sat, 31 Jul 2010 23:28:37 -0300
Subject: [PATCH 457/863] V4L/DVB: cx23885, cx25840: Report the actual length
of an IR Rx timeout event
Instead of reporting an IR Rx timeout event as a ridiculously
long space, report it as a space of the lenght of the timeout.
This partially fixes operation with LIRC without breaking
interoperation with the in kernel decoders. The gaps lengths
reported to LIRC are still not real however.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-input.c | 6 ------
drivers/media/video/cx23885/cx23888-ir.c | 14 ++++++++------
drivers/media/video/cx25840/cx25840-ir.c | 14 ++++++++------
3 files changed, 16 insertions(+), 18 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 3f924e21b9575..252817acc35bc 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -46,12 +46,6 @@
static void convert_measurement(u32 x, struct ir_raw_event *y)
{
- if (x == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
- y->pulse = false;
- y->duration = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
- return;
- }
-
y->pulse = (x & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? true : false;
y->duration = x & V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
}
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index aa07286b8d9ba..684d23db98a70 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -675,16 +675,18 @@ static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
*num = n * sizeof(u32);
for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
+
if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
- *p = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
+ /* Assume RTO was because of no IR light input */
+ u = 0;
v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
- continue;
+ } else {
+ u = (*p & FIFO_RXTX_LVL)
+ ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
+ if (invert)
+ u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
}
- u = (*p & FIFO_RXTX_LVL) ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
- if (invert)
- u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
-
v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
divider);
if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index 326c2554c05c5..be23c5b37a2f3 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -677,16 +677,18 @@ static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
*num = n * sizeof(u32);
for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
+
if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
- *p = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
+ /* Assume RTO was because of no IR light input */
+ u = 0;
v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
- continue;
+ } else {
+ u = (*p & FIFO_RXTX_LVL)
+ ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
+ if (invert)
+ u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
}
- u = (*p & FIFO_RXTX_LVL) ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
- if (invert)
- u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
-
v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
divider);
if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
--
GitLab
From c02e0d12a9a0a913dee5efd695603b73ee4b729a Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 1 Aug 2010 02:18:13 -0300
Subject: [PATCH 458/863] V4L/DVB: cx23885, cx25840: Change IR measurment
records to use struct ir_raw_event
The CX23885 and CX25840 modules were using their own simple
IR pulse width measurement record type which required conversion
when passing to the new IR core. This change makes that record type
consistent with the new IR core and removes a data conversion.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx23885/cx23885-input.c | 18 ++---
drivers/media/video/cx23885/cx23888-ir.c | 73 +++++++++++++--------
drivers/media/video/cx25840/cx25840-ir.c | 71 ++++++++++++--------
3 files changed, 91 insertions(+), 71 deletions(-)
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 252817acc35bc..bb61870b8d6ed 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -44,34 +44,26 @@
#define MODULE_NAME "cx23885"
-static void convert_measurement(u32 x, struct ir_raw_event *y)
-{
- y->pulse = (x & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? true : false;
- y->duration = x & V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
-}
-
static void cx23885_input_process_measurements(struct cx23885_dev *dev,
bool overrun)
{
struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir;
- struct ir_raw_event kernel_ir_event;
- u32 sd_ir_data[64];
ssize_t num;
int count, i;
bool handle = false;
+ struct ir_raw_event ir_core_event[64];
do {
num = 0;
- v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) sd_ir_data,
- sizeof(sd_ir_data), &num);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ir_core_event,
+ sizeof(ir_core_event), &num);
- count = num / sizeof(u32);
+ count = num / sizeof(struct ir_raw_event);
for (i = 0; i < count; i++) {
- convert_measurement(sd_ir_data[i], &kernel_ir_event);
ir_raw_event_store(kernel_ir->inp_dev,
- &kernel_ir_event);
+ &ir_core_event[i]);
handle = true;
}
} while (num != 0);
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index 684d23db98a70..2502a0a670978 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -26,6 +26,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <media/ir-core.h>
#include "cx23885.h"
@@ -113,8 +114,18 @@ MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
#define CX23888_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */
#define CX23888_IR_REFCLK_FREQ (CX23888_VIDCLK_FREQ / 2)
-#define CX23888_IR_RX_KFIFO_SIZE (512 * sizeof(u32))
-#define CX23888_IR_TX_KFIFO_SIZE (512 * sizeof(u32))
+/*
+ * We use this union internally for convenience, but callers to tx_write
+ * and rx_read will be expecting records of type struct ir_raw_event.
+ * Always ensure the size of this union is dictated by struct ir_raw_event.
+ */
+union cx23888_ir_fifo_rec {
+ u32 hw_fifo_data;
+ struct ir_raw_event ir_core_data;
+};
+
+#define CX23888_IR_RX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec))
+#define CX23888_IR_TX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec))
struct cx23888_ir_state {
struct v4l2_subdev sd;
@@ -458,8 +469,8 @@ static u32 txclk_tx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
{
u64 pulse_clocks;
- if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ if (ns > IR_MAX_DURATION)
+ ns = IR_MAX_DURATION;
pulse_clocks = ns_to_pulse_clocks(ns);
*divider = pulse_clocks_to_clock_divider(pulse_clocks);
cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
@@ -471,8 +482,8 @@ static u32 rxclk_rx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
{
u64 pulse_clocks;
- if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ if (ns > IR_MAX_DURATION)
+ ns = IR_MAX_DURATION;
pulse_clocks = ns_to_pulse_clocks(ns);
*divider = pulse_clocks_to_clock_divider(pulse_clocks);
cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
@@ -535,8 +546,8 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
- u32 rx_data[FIFO_RX_DEPTH];
- int i, j, k;
+ union cx23888_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
+ unsigned int i, j, k;
u32 events, v;
int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
@@ -597,11 +608,12 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
for (j = 0;
(v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG);
- rx_data[i++] = v & ~FIFO_RX_NDV;
+ rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
+ i++;
}
if (i == 0)
break;
- j = i * sizeof(u32);
+ j = i * sizeof(union cx23888_ir_fifo_rec);
k = kfifo_in_locked(&state->rx_kfifo,
(unsigned char *) rx_data, j,
&state->rx_kfifo_lock);
@@ -660,10 +672,11 @@ static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
u16 divider = (u16) atomic_read(&state->rxclk_divider);
unsigned int i, n;
- u32 *p;
- u32 u, v;
+ union cx23888_ir_fifo_rec *p;
+ unsigned u, v;
- n = count / sizeof(u32) * sizeof(u32);
+ n = count / sizeof(union cx23888_ir_fifo_rec)
+ * sizeof(union cx23888_ir_fifo_rec);
if (n == 0) {
*num = 0;
return 0;
@@ -671,28 +684,28 @@ static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock);
- n /= sizeof(u32);
- *num = n * sizeof(u32);
+ n /= sizeof(union cx23888_ir_fifo_rec);
+ *num = n * sizeof(union cx23888_ir_fifo_rec);
- for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
+ for (p = (union cx23888_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
- if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+ if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
/* Assume RTO was because of no IR light input */
u = 0;
v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
} else {
- u = (*p & FIFO_RXTX_LVL)
- ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
+ u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
if (invert)
- u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
+ u = u ? 0 : 1;
}
- v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
- divider);
- if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- v = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS - 1;
+ v = (unsigned) pulse_width_count_to_ns(
+ (u16) (p->hw_fifo_data & FIFO_RXTX), divider);
+ if (v > IR_MAX_DURATION)
+ v = IR_MAX_DURATION;
- *p = u | v;
+ p->ir_core_data.pulse = u;
+ p->ir_core_data.duration = v;
v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s\n",
v, u ? "mark" : "space");
@@ -751,7 +764,8 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
- o->bytes_per_data_element = p->bytes_per_data_element = sizeof(u32);
+ o->bytes_per_data_element = p->bytes_per_data_element
+ = sizeof(union cx23888_ir_fifo_rec);
/* Before we tweak the hardware, we have to disable the receiver */
irqenable_rx(dev, 0);
@@ -878,7 +892,8 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
- o->bytes_per_data_element = p->bytes_per_data_element = sizeof(u32);
+ o->bytes_per_data_element = p->bytes_per_data_element
+ = sizeof(union cx23888_ir_fifo_rec);
/* Before we tweak the hardware, we have to disable the transmitter */
irqenable_tx(dev, 0);
@@ -1149,7 +1164,7 @@ static const struct v4l2_subdev_ops cx23888_ir_controller_ops = {
};
static const struct v4l2_subdev_ir_parameters default_rx_params = {
- .bytes_per_data_element = sizeof(u32),
+ .bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
.enable = false,
@@ -1168,7 +1183,7 @@ static const struct v4l2_subdev_ir_parameters default_rx_params = {
};
static const struct v4l2_subdev_ir_parameters default_tx_params = {
- .bytes_per_data_element = sizeof(u32),
+ .bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
.enable = false,
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index be23c5b37a2f3..34e284b06dfa1 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/kfifo.h>
#include <media/cx25840.h>
+#include <media/ir-core.h>
#include "cx25840-core.h"
@@ -94,8 +95,18 @@ MODULE_PARM_DESC(ir_debug, "enable integrated IR debug messages");
#define CX25840_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */
#define CX25840_IR_REFCLK_FREQ (CX25840_VIDCLK_FREQ / 2)
-#define CX25840_IR_RX_KFIFO_SIZE (512 * sizeof(u32))
-#define CX25840_IR_TX_KFIFO_SIZE (512 * sizeof(u32))
+/*
+ * We use this union internally for convenience, but callers to tx_write
+ * and rx_read will be expecting records of type struct ir_raw_event.
+ * Always ensure the size of this union is dictated by struct ir_raw_event.
+ */
+union cx25840_ir_fifo_rec {
+ u32 hw_fifo_data;
+ struct ir_raw_event ir_core_data;
+};
+
+#define CX25840_IR_RX_KFIFO_SIZE (256 * sizeof(union cx25840_ir_fifo_rec))
+#define CX25840_IR_TX_KFIFO_SIZE (256 * sizeof(union cx25840_ir_fifo_rec))
struct cx25840_ir_state {
struct i2c_client *c;
@@ -435,8 +446,8 @@ static u32 txclk_tx_s_max_pulse_width(struct i2c_client *c, u32 ns,
{
u64 pulse_clocks;
- if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ if (ns > IR_MAX_DURATION)
+ ns = IR_MAX_DURATION;
pulse_clocks = ns_to_pulse_clocks(ns);
*divider = pulse_clocks_to_clock_divider(pulse_clocks);
cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
@@ -448,8 +459,8 @@ static u32 rxclk_rx_s_max_pulse_width(struct i2c_client *c, u32 ns,
{
u64 pulse_clocks;
- if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ if (ns > IR_MAX_DURATION)
+ ns = IR_MAX_DURATION;
pulse_clocks = ns_to_pulse_clocks(ns);
*divider = pulse_clocks_to_clock_divider(pulse_clocks);
cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
@@ -516,8 +527,8 @@ int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled)
struct i2c_client *c = NULL;
unsigned long flags;
- u32 rx_data[FIFO_RX_DEPTH];
- int i, j, k;
+ union cx25840_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
+ unsigned int i, j, k;
u32 events, v;
int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
u32 cntrl, irqen, stats;
@@ -594,11 +605,12 @@ int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled)
for (j = 0;
(v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
v = cx25840_read4(c, CX25840_IR_FIFO_REG);
- rx_data[i++] = v & ~FIFO_RX_NDV;
+ rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
+ i++;
}
if (i == 0)
break;
- j = i * sizeof(u32);
+ j = i * sizeof(union cx25840_ir_fifo_rec);
k = kfifo_in_locked(&ir_state->rx_kfifo,
(unsigned char *) rx_data, j,
&ir_state->rx_kfifo_lock);
@@ -655,8 +667,8 @@ static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
bool invert;
u16 divider;
unsigned int i, n;
- u32 *p;
- u32 u, v;
+ union cx25840_ir_fifo_rec *p;
+ unsigned u, v;
if (ir_state == NULL)
return -ENODEV;
@@ -664,7 +676,8 @@ static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
invert = (bool) atomic_read(&ir_state->rx_invert);
divider = (u16) atomic_read(&ir_state->rxclk_divider);
- n = count / sizeof(u32) * sizeof(u32);
+ n = count / sizeof(union cx25840_ir_fifo_rec)
+ * sizeof(union cx25840_ir_fifo_rec);
if (n == 0) {
*num = 0;
return 0;
@@ -673,28 +686,28 @@ static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
n = kfifo_out_locked(&ir_state->rx_kfifo, buf, n,
&ir_state->rx_kfifo_lock);
- n /= sizeof(u32);
- *num = n * sizeof(u32);
+ n /= sizeof(union cx25840_ir_fifo_rec);
+ *num = n * sizeof(union cx25840_ir_fifo_rec);
- for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
+ for (p = (union cx25840_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
- if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+ if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
/* Assume RTO was because of no IR light input */
u = 0;
v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
} else {
- u = (*p & FIFO_RXTX_LVL)
- ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
+ u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
if (invert)
- u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
+ u = u ? 0 : 1;
}
- v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
- divider);
- if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
- v = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS - 1;
+ v = (unsigned) pulse_width_count_to_ns(
+ (u16) (p->hw_fifo_data & FIFO_RXTX), divider);
+ if (v > IR_MAX_DURATION)
+ v = IR_MAX_DURATION;
- *p = u | v;
+ p->ir_core_data.pulse = u;
+ p->ir_core_data.duration = v;
v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns %s\n",
v, u ? "mark" : "space");
@@ -769,7 +782,7 @@ static int cx25840_ir_rx_s_parameters(struct v4l2_subdev *sd,
p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
o->mode = p->mode;
- p->bytes_per_data_element = sizeof(u32);
+ p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec);
o->bytes_per_data_element = p->bytes_per_data_element;
/* Before we tweak the hardware, we have to disable the receiver */
@@ -958,7 +971,7 @@ static int cx25840_ir_tx_s_parameters(struct v4l2_subdev *sd,
p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
o->mode = p->mode;
- p->bytes_per_data_element = sizeof(u32);
+ p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec);
o->bytes_per_data_element = p->bytes_per_data_element;
/* Before we tweak the hardware, we have to disable the transmitter */
@@ -1172,7 +1185,7 @@ const struct v4l2_subdev_ir_ops cx25840_ir_ops = {
static const struct v4l2_subdev_ir_parameters default_rx_params = {
- .bytes_per_data_element = sizeof(u32),
+ .bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec),
.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
.enable = false,
@@ -1191,7 +1204,7 @@ static const struct v4l2_subdev_ir_parameters default_rx_params = {
};
static const struct v4l2_subdev_ir_parameters default_tx_params = {
- .bytes_per_data_element = sizeof(u32),
+ .bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec),
.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
.enable = false,
--
GitLab
From d69e85b644dbc8c68dec3b4149941989d4bcc66f Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 1 Aug 2010 02:36:20 -0300
Subject: [PATCH 459/863] V4L/DVB: v4l2_subdev: Get rid of now unused IR pulse
width defines
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx25840/cx25840-ir.c | 4 ++--
include/media/v4l2-subdev.h | 7 +------
2 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index 34e284b06dfa1..c2b4c14dc9ab5 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -886,10 +886,10 @@ static int cx25840_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
*/
for (i = 0; i < n; ) {
for (j = 0; j < FIFO_TX_DEPTH / 2 && i < n; j++) {
- mark = ns_pulse[i] & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
+ mark = ns_pulse[i] & LEVEL_MASK;
fifo_pulse[j] = ns_to_pulse_width_count(
ns_pulse[i] &
- ~V4L2_SUBDEV_IR_PULSE_LEVEL_MASK,
+ ~LEVEL_MASK,
ir_state->txclk_divider);
if (mark)
fifo_pulse[j] &= FIFO_RXTX_LVL;
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index bacd52568ef9f..08880dd15d2fe 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -360,14 +360,9 @@ struct v4l2_subdev_sensor_ops {
*/
enum v4l2_subdev_ir_mode {
- V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* space & mark widths in nanosecs */
+ V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */
};
-/* Data format of data read or written for V4L2_SUBDEV_IR_MODE_PULSE_WIDTH */
-#define V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS 0x7fffffff
-#define V4L2_SUBDEV_IR_PULSE_LEVEL_MASK 0x80000000
-#define V4L2_SUBDEV_IR_PULSE_RX_SEQ_END 0xffffffff
-
struct v4l2_subdev_ir_parameters {
/* Either Rx or Tx */
unsigned int bytes_per_data_element; /* of data in read or write call */
--
GitLab
From 20cd19597238723237d214dbab18c0b7c68c5814 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Mon, 26 Jul 2010 11:11:36 -0300
Subject: [PATCH 460/863] V4L/DVB: IR/imon: remove incorrect calls to
input_free_device
Per Dmitry Torokhov, following input_unregister_device with an
input_free_device is forbidden, the former is sufficient alone.
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/imon.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index 65c125e44e964..a665d48bed473 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -1944,7 +1944,6 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
urb_submit_failed:
ir_input_unregister(ictx->idev);
- input_free_device(ictx->idev);
idev_setup_failed:
find_endpoint_failed:
mutex_unlock(&ictx->lock);
@@ -2014,10 +2013,8 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
return ictx;
urb_submit_failed:
- if (ictx->touch) {
+ if (ictx->touch)
input_unregister_device(ictx->touch);
- input_free_device(ictx->touch);
- }
touch_setup_failed:
find_endpoint_failed:
mutex_unlock(&ictx->lock);
--
GitLab
From da48db669f50d47c208da3648dca7cac7ea6dcca Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 27 Jul 2010 22:29:44 -0300
Subject: [PATCH 461/863] V4L/DVB: IR/imon: remove bad ir_input_dev use
The ir_input_dev gets filled in by __ir_input_register, the one
allocated in imon_init_idev was being overwritten by the correct one
shortly after it was initialized (ultimately resulting in a memory
leak). Additionally, there was an ill-advised memcpy into that
extraneous ir_input_dev which gets fixed by this.
Ill-advised memcpy pointed out by Dmitry Torokhov, bad usage of
ir_input_dev pointed out by Maxim Levitsky.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/imon.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index a665d48bed473..c185422ef28c8 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -87,7 +87,6 @@ static ssize_t lcd_write(struct file *file, const char *buf,
struct imon_context {
struct device *dev;
struct ir_dev_props *props;
- struct ir_input_dev *ir;
/* Newer devices have two interfaces */
struct usb_device *usbdev_intf0;
struct usb_device *usbdev_intf1;
@@ -1656,7 +1655,6 @@ static struct input_dev *imon_init_idev(struct imon_context *ictx)
{
struct input_dev *idev;
struct ir_dev_props *props;
- struct ir_input_dev *ir;
int ret, i;
idev = input_allocate_device();
@@ -1671,12 +1669,6 @@ static struct input_dev *imon_init_idev(struct imon_context *ictx)
goto props_alloc_failed;
}
- ir = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL);
- if (!ir) {
- dev_err(ictx->dev, "remote ir input dev allocation failed\n");
- goto ir_dev_alloc_failed;
- }
-
snprintf(ictx->name_idev, sizeof(ictx->name_idev),
"iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
idev->name = ictx->name_idev;
@@ -1706,14 +1698,9 @@ static struct input_dev *imon_init_idev(struct imon_context *ictx)
props->change_protocol = imon_ir_change_protocol;
ictx->props = props;
- ictx->ir = ir;
- memcpy(&ir->dev, ictx->dev, sizeof(struct device));
-
usb_to_input_id(ictx->usbdev_intf0, &idev->id);
idev->dev.parent = ictx->dev;
- input_set_drvdata(idev, ir);
-
ret = ir_input_register(idev, RC_MAP_IMON_PAD, props, MOD_NAME);
if (ret < 0) {
dev_err(ictx->dev, "remote input dev register failed\n");
@@ -1723,8 +1710,6 @@ static struct input_dev *imon_init_idev(struct imon_context *ictx)
return idev;
idev_register_failed:
- kfree(ir);
-ir_dev_alloc_failed:
kfree(props);
props_alloc_failed:
input_free_device(idev);
--
GitLab
From 7a9fcb41b9370a32bb65bece9afc83701ab2d2b6 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 29 Jul 2010 18:34:52 -0300
Subject: [PATCH 462/863] V4L/DVB: IR/mceusb: remove bad ir_input_dev use
The ir_input_dev gets filled in by __ir_input_register, the one
allocated in mceusb_init_input_dev was being overwritten by the correct
one shortly after it was initialized (ultimately resulting in a memory
leak). This bug was inherited from imon.c, and was pointed out to me by
Maxim Levitsky.
v2: fix incorrect dev arg to dev_dbg
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/mceusb.c | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c
index 78bf7f77a1a04..65b0738781698 100644
--- a/drivers/media/IR/mceusb.c
+++ b/drivers/media/IR/mceusb.c
@@ -228,7 +228,6 @@ static struct usb_device_id std_tx_mask_list[] = {
/* data structure for each usb transceiver */
struct mceusb_dev {
/* ir-core bits */
- struct ir_input_dev *irdev;
struct ir_dev_props *props;
struct ir_raw_event rawir;
@@ -739,7 +738,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
ir->send_flags = SEND_FLAG_COMPLETE;
- dev_dbg(&ir->irdev->dev, "setup answer received %d bytes\n",
+ dev_dbg(ir->dev, "setup answer received %d bytes\n",
buf_len);
}
@@ -861,7 +860,6 @@ static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
{
struct input_dev *idev;
struct ir_dev_props *props;
- struct ir_input_dev *irdev;
struct device *dev = ir->dev;
int ret = -ENODEV;
@@ -878,12 +876,6 @@ static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
goto props_alloc_failed;
}
- irdev = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL);
- if (!irdev) {
- dev_err(dev, "remote ir input dev allocation failed\n");
- goto ir_dev_alloc_failed;
- }
-
snprintf(ir->name, sizeof(ir->name), "Media Center Ed. eHome "
"Infrared Remote Transceiver (%04x:%04x)",
le16_to_cpu(ir->usbdev->descriptor.idVendor),
@@ -902,9 +894,6 @@ static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
props->tx_ir = mceusb_tx_ir;
ir->props = props;
- ir->irdev = irdev;
-
- input_set_drvdata(idev, irdev);
ret = ir_input_register(idev, RC_MAP_RC6_MCE, props, DRIVER_NAME);
if (ret < 0) {
@@ -915,8 +904,6 @@ static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
return idev;
irdev_failed:
- kfree(irdev);
-ir_dev_alloc_failed:
kfree(props);
props_alloc_failed:
input_free_device(idev);
--
GitLab
From efce8ca3c5d8a35018f801d687396e1911cfc868 Mon Sep 17 00:00:00 2001
From: Janne Grunau <j@jannau.net>
Date: Thu, 29 Jul 2010 12:24:22 -0300
Subject: [PATCH 463/863] V4L/DVB: staging/lirc: fix Kconfig dependencies
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/staging/lirc/Kconfig | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
index 968c2adee06bf..ab30a098efcc5 100644
--- a/drivers/staging/lirc/Kconfig
+++ b/drivers/staging/lirc/Kconfig
@@ -3,6 +3,7 @@
#
menuconfig LIRC_STAGING
bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
+ depends on LIRC
help
Say Y here, and all supported Linux Infrared Remote Control IR and
RF receiver and transmitter drivers will be displayed. When paired
@@ -13,13 +14,13 @@ if LIRC_STAGING
config LIRC_BT829
tristate "BT829 based hardware"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && PCI
help
Driver for the IR interface on BT829-based hardware
config LIRC_ENE0100
tristate "ENE KB3924/ENE0100 CIR Port Reciever"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && PNP
help
This is a driver for CIR port handled by ENE KB3924 embedded
controller found on some notebooks.
@@ -27,7 +28,7 @@ config LIRC_ENE0100
config LIRC_I2C
tristate "I2C Based IR Receivers"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && I2C
help
Driver for I2C-based IR receivers, such as those commonly
found onboard Hauppauge PVR-150/250/350 video capture cards
@@ -40,7 +41,7 @@ config LIRC_IGORPLUGUSB
config LIRC_IMON
tristate "Legacy SoundGraph iMON Receiver and Display"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && USB
help
Driver for the original SoundGraph iMON IR Receiver and Display
@@ -48,7 +49,7 @@ config LIRC_IMON
config LIRC_IT87
tristate "ITE IT87XX CIR Port Receiver"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && PNP
help
Driver for the ITE IT87xx IR Receiver
@@ -60,13 +61,13 @@ config LIRC_ITE8709
config LIRC_PARALLEL
tristate "Homebrew Parallel Port Receiver"
- depends on LIRC_STAGING && !SMP
+ depends on LIRC_STAGING && PARPORT && !SMP
help
Driver for Homebrew Parallel Port Receivers
config LIRC_SASEM
tristate "Sasem USB IR Remote"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && USB
help
Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
@@ -91,7 +92,7 @@ config LIRC_SIR
config LIRC_STREAMZAP
tristate "Streamzap PC Receiver"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && USB
help
Driver for the Streamzap PC Receiver
@@ -103,7 +104,7 @@ config LIRC_TTUSBIR
config LIRC_ZILOG
tristate "Zilog/Hauppauge IR Transmitter"
- depends on LIRC_STAGING
+ depends on LIRC_STAGING && I2C
help
Driver for the Zilog/Hauppauge IR Transmitter, found on
PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
--
GitLab
From 82ce67bf262b3f47ecb5a0ca31cace8ac72b7c98 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 29 Jul 2010 18:20:44 -0300
Subject: [PATCH 464/863] V4L/DVB: staging/lirc: fix non-CONFIG_MODULES build
horkage
Fix when CONFIG_MODULES is not enabled:
drivers/staging/lirc/lirc_parallel.c:243: error: implicit declaration of function 'module_refcount'
drivers/staging/lirc/lirc_it87.c:150: error: implicit declaration of function 'module_refcount'
drivers/built-in.o: In function `it87_probe':
lirc_it87.c:(.text+0x4079b0): undefined reference to `init_chrdev'
lirc_it87.c:(.text+0x4079cc): undefined reference to `drop_chrdev'
drivers/built-in.o: In function `lirc_it87_exit':
lirc_it87.c:(.exit.text+0x38a5): undefined reference to `drop_chrdev'
Its a quick hack and untested beyond building, since I don't have the
hardware, but it should do the trick.
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/staging/lirc/lirc_it87.c | 9 ++++++---
drivers/staging/lirc/lirc_parallel.c | 4 ++--
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/lirc/lirc_it87.c b/drivers/staging/lirc/lirc_it87.c
index 09f36961c6d29..ec11c0e949a05 100644
--- a/drivers/staging/lirc/lirc_it87.c
+++ b/drivers/staging/lirc/lirc_it87.c
@@ -109,6 +109,7 @@ static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue);
static DEFINE_SPINLOCK(hardware_lock);
static DEFINE_SPINLOCK(dev_lock);
+static bool device_open;
static int rx_buf[RBUF_LEN];
unsigned int rx_tail, rx_head;
@@ -147,10 +148,11 @@ static void drop_port(void);
static int lirc_open(struct inode *inode, struct file *file)
{
spin_lock(&dev_lock);
- if (module_refcount(THIS_MODULE)) {
+ if (device_open) {
spin_unlock(&dev_lock);
return -EBUSY;
}
+ device_open = true;
spin_unlock(&dev_lock);
return 0;
}
@@ -158,6 +160,9 @@ static int lirc_open(struct inode *inode, struct file *file)
static int lirc_close(struct inode *inode, struct file *file)
{
+ spin_lock(&dev_lock);
+ device_open = false;
+ spin_unlock(&dev_lock);
return 0;
}
@@ -363,7 +368,6 @@ static struct lirc_driver driver = {
};
-#ifdef MODULE
static int init_chrdev(void)
{
driver.minor = lirc_register_driver(&driver);
@@ -380,7 +384,6 @@ static void drop_chrdev(void)
{
lirc_unregister_driver(driver.minor);
}
-#endif
/* SECTION: Hardware */
diff --git a/drivers/staging/lirc/lirc_parallel.c b/drivers/staging/lirc/lirc_parallel.c
index a1ebd071640f7..6da4a8c6ebc3b 100644
--- a/drivers/staging/lirc/lirc_parallel.c
+++ b/drivers/staging/lirc/lirc_parallel.c
@@ -240,7 +240,7 @@ static void irq_handler(void *blah)
unsigned int level, newlevel;
unsigned int timeout;
- if (!module_refcount(THIS_MODULE))
+ if (!is_open)
return;
if (!is_claimed)
@@ -515,7 +515,7 @@ static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
static int lirc_open(struct inode *node, struct file *filep)
{
- if (module_refcount(THIS_MODULE) || !lirc_claim())
+ if (is_open || !lirc_claim())
return -EBUSY;
parport_enable_irq(pport);
--
GitLab
From 7c294402d58e22bb760c0e1a825eea5d582a8f2d Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Mon, 2 Aug 2010 18:21:06 -0300
Subject: [PATCH 465/863] V4L/DVB: IR/mceusb: less generic callback name and
remove cruft
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/mceusb.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c
index 65b0738781698..ac6bb2c01a481 100644
--- a/drivers/media/IR/mceusb.c
+++ b/drivers/media/IR/mceusb.c
@@ -427,7 +427,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
}
}
-static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
+static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
{
struct mceusb_dev *ir;
int len;
@@ -476,7 +476,7 @@ static void mce_request_packet(struct mceusb_dev *ir,
/* outbound data */
usb_fill_int_urb(async_urb, ir->usbdev,
usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
- async_buf, size, (usb_complete_t) usb_async_callback,
+ async_buf, size, (usb_complete_t)mce_async_callback,
ir, ep->bInterval);
memcpy(async_buf, data, size);
@@ -919,7 +919,6 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
struct usb_endpoint_descriptor *ep = NULL;
struct usb_endpoint_descriptor *ep_in = NULL;
struct usb_endpoint_descriptor *ep_out = NULL;
- struct usb_host_config *config;
struct mceusb_dev *ir = NULL;
int pipe, maxp, i;
char buf[63], name[128] = "";
@@ -929,7 +928,6 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
dev_dbg(&intf->dev, ": %s called\n", __func__);
- config = dev->actconfig;
idesc = intf->cur_altsetting;
is_gen3 = usb_match_id(intf, gen3_list) ? 1 : 0;
--
GitLab
From 8e9e60640067858e8036d4d43bbf725c60613359 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 3 Aug 2010 01:07:04 -0300
Subject: [PATCH 466/863] V4L/DVB: staging/lirc: port lirc_streamzap to ir-core
This ports lirc_streamzap.c over to ir-core in-place, to be followed by
a patch moving the driver over to drivers/media/IR/streamzap.c and
enabling the proper Kconfig bits.
Presently, the in-kernel keymap doesn't work, as the stock Streamzap
remote uses an RC-5-like, but not-quite-RC-5 protocol, which the
in-kernel RC-5 decoder doesn't cope with. The remote can be used right
now with the lirc bridge driver though, and other remotes (at least an
RC-6(A) MCE remote) work perfectly with the driver.
I'll take a look at making the existing RC-5 decoder cope with this odd
duck, possibly implement another standalone decoder engine, or just
throw up my hands and say "meh, use lirc"... But the driver itself
should be perfectly sound.
Remaining items on the streamzap TODO list:
- add LIRC_SET_REC_TIMEOUT-alike support
- add LIRC_GET_M{AX,IN}_TIMEOUT-alike support
- add LIRC_GET_REC_RESOLUTION-alike support
All of the above should be trivial to add. There are patches pending to
add this support to ir-core from Maxim Levitsky, and I'll take care of
these once his patches get integrated. None of them are currently
essential though.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/keymaps/Makefile | 1 +
drivers/media/IR/keymaps/rc-rc5-streamzap.c | 81 ++
drivers/staging/lirc/lirc_streamzap.c | 812 +++++++++-----------
include/media/rc-map.h | 1 +
4 files changed, 449 insertions(+), 446 deletions(-)
create mode 100644 drivers/media/IR/keymaps/rc-rc5-streamzap.c
diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/IR/keymaps/Makefile
index cbee06243b512..c9fcc41944e97 100644
--- a/drivers/media/IR/keymaps/Makefile
+++ b/drivers/media/IR/keymaps/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
rc-purpletv.o \
rc-pv951.o \
rc-rc5-hauppauge-new.o \
+ rc-rc5-streamzap.o \
rc-rc5-tv.o \
rc-rc6-mce.o \
rc-real-audio-220-32-keys.o \
diff --git a/drivers/media/IR/keymaps/rc-rc5-streamzap.c b/drivers/media/IR/keymaps/rc-rc5-streamzap.c
new file mode 100644
index 0000000000000..4c19c58b46d80
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-rc5-streamzap.c
@@ -0,0 +1,81 @@
+/* rc-rc5-streamzap.c - Keytable for Streamzap PC Remote, for use
+ * with the Streamzap PC Remote IR Receiver.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode rc5_streamzap[] = {
+/*
+ * FIXME: The Streamzap remote isn't actually true RC-5, it has an extra
+ * bit in it, which presently throws the in-kernel RC-5 decoder for a loop.
+ * We either have to enhance the decoder to support it, add a new decoder,
+ * or just rely on lirc userspace decoding.
+ */
+ { 0x00, KEY_NUMERIC_0 },
+ { 0x01, KEY_NUMERIC_1 },
+ { 0x02, KEY_NUMERIC_2 },
+ { 0x03, KEY_NUMERIC_3 },
+ { 0x04, KEY_NUMERIC_4 },
+ { 0x05, KEY_NUMERIC_5 },
+ { 0x06, KEY_NUMERIC_6 },
+ { 0x07, KEY_NUMERIC_7 },
+ { 0x08, KEY_NUMERIC_8 },
+ { 0x0a, KEY_POWER },
+ { 0x0b, KEY_MUTE },
+ { 0x0c, KEY_CHANNELUP },
+ { 0x0d, KEY_VOLUMEUP },
+ { 0x0e, KEY_CHANNELDOWN },
+ { 0x0f, KEY_VOLUMEDOWN },
+ { 0x10, KEY_UP },
+ { 0x11, KEY_LEFT },
+ { 0x12, KEY_OK },
+ { 0x13, KEY_RIGHT },
+ { 0x14, KEY_DOWN },
+ { 0x15, KEY_MENU },
+ { 0x16, KEY_EXIT },
+ { 0x17, KEY_PLAY },
+ { 0x18, KEY_PAUSE },
+ { 0x19, KEY_STOP },
+ { 0x1a, KEY_BACK },
+ { 0x1b, KEY_FORWARD },
+ { 0x1c, KEY_RECORD },
+ { 0x1d, KEY_REWIND },
+ { 0x1e, KEY_FASTFORWARD },
+ { 0x20, KEY_RED },
+ { 0x21, KEY_GREEN },
+ { 0x22, KEY_YELLOW },
+ { 0x23, KEY_BLUE },
+
+};
+
+static struct rc_keymap rc5_streamzap_map = {
+ .map = {
+ .scan = rc5_streamzap,
+ .size = ARRAY_SIZE(rc5_streamzap),
+ .ir_type = IR_TYPE_RC5,
+ .name = RC_MAP_RC5_STREAMZAP,
+ }
+};
+
+static int __init init_rc_map_rc5_streamzap(void)
+{
+ return ir_register_map(&rc5_streamzap_map);
+}
+
+static void __exit exit_rc_map_rc5_streamzap(void)
+{
+ ir_unregister_map(&rc5_streamzap_map);
+}
+
+module_init(init_rc_map_rc5_streamzap)
+module_exit(exit_rc_map_rc5_streamzap)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/staging/lirc/lirc_streamzap.c b/drivers/staging/lirc/lirc_streamzap.c
index be09c103f0c93..058e29fd478ce 100644
--- a/drivers/staging/lirc/lirc_streamzap.c
+++ b/drivers/staging/lirc/lirc_streamzap.c
@@ -2,6 +2,7 @@
* Streamzap Remote Control driver
*
* Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
*
* This driver was based on the work of Greg Wickham and Adrian
* Dewhurst. It was substantially rewritten to support correct signal
@@ -10,6 +11,8 @@
* delay buffer an ugly hack would be required in lircd, which can
* cause sluggish signal decoding in certain situations.
*
+ * Ported to in-kernel ir-core interface by Jarod Wilson
+ *
* This driver is based on the USB skeleton driver packaged with the
* kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
*
@@ -28,36 +31,26 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-#define DRIVER_VERSION "1.28"
-#define DRIVER_NAME "lirc_streamzap"
+#define DRIVER_VERSION "1.60"
+#define DRIVER_NAME "streamzap"
#define DRIVER_DESC "Streamzap Remote Control driver"
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
static int debug;
+#endif
#define USB_STREAMZAP_VENDOR_ID 0x0e9c
#define USB_STREAMZAP_PRODUCT_ID 0x0000
-/* Use our own dbg macro */
-#define dprintk(fmt, args...) \
- do { \
- if (debug) \
- printk(KERN_DEBUG DRIVER_NAME "[%d]: " \
- fmt "\n", ## args); \
- } while (0)
-
/* table of devices that work with this driver */
static struct usb_device_id streamzap_table[] = {
/* Streamzap Remote Control */
@@ -74,7 +67,7 @@ MODULE_DEVICE_TABLE(usb, streamzap_table);
#define STREAMZAP_RESOLUTION 256
/* number of samples buffered */
-#define STREAMZAP_BUF_LEN 128
+#define SZ_BUF_LEN 128
enum StreamzapDecoderState {
PulseSpace,
@@ -83,65 +76,52 @@ enum StreamzapDecoderState {
IgnorePulse
};
-/* Structure to hold all of our device specific stuff
- *
- * some remarks regarding locking:
- * theoretically this struct can be accessed from three threads:
- *
- * - from lirc_dev through set_use_inc/set_use_dec
- *
- * - from the USB layer throuh probe/disconnect/irq
- *
- * Careful placement of lirc_register_driver/lirc_unregister_driver
- * calls will prevent conflicts. lirc_dev makes sure that
- * set_use_inc/set_use_dec are not being executed and will not be
- * called after lirc_unregister_driver returns.
- *
- * - by the timer callback
- *
- * The timer is only running when the device is connected and the
- * LIRC device is open. Making sure the timer is deleted by
- * set_use_dec will make conflicts impossible.
- */
-struct usb_streamzap {
+/* structure to hold our device specific stuff */
+struct streamzap_ir {
+
+ /* ir-core */
+ struct ir_dev_props *props;
+ struct ir_raw_event rawir;
+
+ /* core device info */
+ struct device *dev;
+ struct input_dev *idev;
/* usb */
- /* save off the usb device pointer */
- struct usb_device *udev;
- /* the interface for this device */
+ struct usb_device *usbdev;
struct usb_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct urb *urb_in;
/* buffer & dma */
unsigned char *buf_in;
dma_addr_t dma_in;
unsigned int buf_in_len;
- struct usb_endpoint_descriptor *endpoint;
-
- /* IRQ */
- struct urb *urb_in;
-
- /* lirc */
- struct lirc_driver *driver;
- struct lirc_buffer *delay_buf;
-
/* timer used to support delay buffering */
struct timer_list delay_timer;
- int timer_running;
+ bool timer_running;
spinlock_t timer_lock;
+ struct timer_list flush_timer;
+ bool flush;
+
+ /* delay buffer */
+ struct kfifo fifo;
+ bool fifo_initialized;
+ /* track what state we're in */
+ enum StreamzapDecoderState decoder_state;
/* tracks whether we are currently receiving some signal */
- int idle;
+ bool idle;
/* sum of signal lengths received since signal start */
unsigned long sum;
/* start time of signal; necessary for gap tracking */
struct timeval signal_last;
struct timeval signal_start;
- enum StreamzapDecoderState decoder_state;
- struct timer_list flush_timer;
- int flush;
- int in_use;
- int timeout_enabled;
+ /* bool timeout_enabled; */
+
+ char name[128];
+ char phys[64];
};
@@ -149,16 +129,11 @@ struct usb_streamzap {
static int streamzap_probe(struct usb_interface *interface,
const struct usb_device_id *id);
static void streamzap_disconnect(struct usb_interface *interface);
-static void usb_streamzap_irq(struct urb *urb);
-static int streamzap_use_inc(void *data);
-static void streamzap_use_dec(void *data);
-static long streamzap_ioctl(struct file *filep, unsigned int cmd,
- unsigned long arg);
+static void streamzap_callback(struct urb *urb);
static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
static int streamzap_resume(struct usb_interface *intf);
/* usb specific object needed to register this driver with the usb subsystem */
-
static struct usb_driver streamzap_driver = {
.name = DRIVER_NAME,
.probe = streamzap_probe,
@@ -168,13 +143,13 @@ static struct usb_driver streamzap_driver = {
.id_table = streamzap_table,
};
-static void stop_timer(struct usb_streamzap *sz)
+static void streamzap_stop_timer(struct streamzap_ir *sz)
{
unsigned long flags;
spin_lock_irqsave(&sz->timer_lock, flags);
if (sz->timer_running) {
- sz->timer_running = 0;
+ sz->timer_running = false;
spin_unlock_irqrestore(&sz->timer_lock, flags);
del_timer_sync(&sz->delay_timer);
} else {
@@ -182,175 +157,183 @@ static void stop_timer(struct usb_streamzap *sz)
}
}
-static void flush_timeout(unsigned long arg)
+static void streamzap_flush_timeout(unsigned long arg)
{
- struct usb_streamzap *sz = (struct usb_streamzap *) arg;
+ struct streamzap_ir *sz = (struct streamzap_ir *)arg;
+
+ dev_info(sz->dev, "%s: callback firing\n", __func__);
/* finally start accepting data */
- sz->flush = 0;
+ sz->flush = false;
}
-static void delay_timeout(unsigned long arg)
+
+static void streamzap_delay_timeout(unsigned long arg)
{
+ struct streamzap_ir *sz = (struct streamzap_ir *)arg;
+ struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
unsigned long flags;
+ int len, ret;
+ static unsigned long delay;
+ bool wake = false;
+
/* deliver data every 10 ms */
- static unsigned long timer_inc =
- (10000/(1000000/HZ)) == 0 ? 1 : (10000/(1000000/HZ));
- struct usb_streamzap *sz = (struct usb_streamzap *) arg;
- int data;
+ delay = msecs_to_jiffies(10);
spin_lock_irqsave(&sz->timer_lock, flags);
- if (!lirc_buffer_empty(sz->delay_buf) &&
- !lirc_buffer_full(sz->driver->rbuf)) {
- lirc_buffer_read(sz->delay_buf, (unsigned char *) &data);
- lirc_buffer_write(sz->driver->rbuf, (unsigned char *) &data);
+ if (kfifo_len(&sz->fifo) > 0) {
+ ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+ if (ret != sizeof(rawir))
+ dev_err(sz->dev, "Problem w/kfifo_out...\n");
+ ir_raw_event_store(sz->idev, &rawir);
+ wake = true;
}
- if (!lirc_buffer_empty(sz->delay_buf)) {
- while (lirc_buffer_available(sz->delay_buf) <
- STREAMZAP_BUF_LEN / 2 &&
- !lirc_buffer_full(sz->driver->rbuf)) {
- lirc_buffer_read(sz->delay_buf,
- (unsigned char *) &data);
- lirc_buffer_write(sz->driver->rbuf,
- (unsigned char *) &data);
- }
- if (sz->timer_running) {
- sz->delay_timer.expires = jiffies + timer_inc;
- add_timer(&sz->delay_timer);
+
+ len = kfifo_len(&sz->fifo);
+ if (len > 0) {
+ while ((len < SZ_BUF_LEN / 2) &&
+ (len < SZ_BUF_LEN * sizeof(int))) {
+ ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+ if (ret != sizeof(rawir))
+ dev_err(sz->dev, "Problem w/kfifo_out...\n");
+ ir_raw_event_store(sz->idev, &rawir);
+ wake = true;
+ len = kfifo_len(&sz->fifo);
}
+ if (sz->timer_running)
+ mod_timer(&sz->delay_timer, jiffies + delay);
+
} else {
- sz->timer_running = 0;
+ sz->timer_running = false;
}
- if (!lirc_buffer_empty(sz->driver->rbuf))
- wake_up(&sz->driver->rbuf->wait_poll);
+ if (wake)
+ ir_raw_event_handle(sz->idev);
spin_unlock_irqrestore(&sz->timer_lock, flags);
}
-static void flush_delay_buffer(struct usb_streamzap *sz)
+static void streamzap_flush_delay_buffer(struct streamzap_ir *sz)
{
- int data;
- int empty = 1;
-
- while (!lirc_buffer_empty(sz->delay_buf)) {
- empty = 0;
- lirc_buffer_read(sz->delay_buf, (unsigned char *) &data);
- if (!lirc_buffer_full(sz->driver->rbuf)) {
- lirc_buffer_write(sz->driver->rbuf,
- (unsigned char *) &data);
- } else {
- dprintk("buffer overflow", sz->driver->minor);
- }
+ struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
+ bool wake = false;
+ int ret;
+
+ while (kfifo_len(&sz->fifo) > 0) {
+ ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+ if (ret != sizeof(rawir))
+ dev_err(sz->dev, "Problem w/kfifo_out...\n");
+ ir_raw_event_store(sz->idev, &rawir);
+ wake = true;
}
- if (!empty)
- wake_up(&sz->driver->rbuf->wait_poll);
+
+ if (wake)
+ ir_raw_event_handle(sz->idev);
}
-static void push(struct usb_streamzap *sz, unsigned char *data)
+static void sz_push(struct streamzap_ir *sz)
{
+ struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
unsigned long flags;
+ int ret;
spin_lock_irqsave(&sz->timer_lock, flags);
- if (lirc_buffer_full(sz->delay_buf)) {
- int read_data;
-
- lirc_buffer_read(sz->delay_buf,
- (unsigned char *) &read_data);
- if (!lirc_buffer_full(sz->driver->rbuf)) {
- lirc_buffer_write(sz->driver->rbuf,
- (unsigned char *) &read_data);
- } else {
- dprintk("buffer overflow", sz->driver->minor);
- }
+ if (kfifo_len(&sz->fifo) >= sizeof(int) * SZ_BUF_LEN) {
+ ret = kfifo_out(&sz->fifo, &rawir, sizeof(rawir));
+ if (ret != sizeof(rawir))
+ dev_err(sz->dev, "Problem w/kfifo_out...\n");
+ ir_raw_event_store(sz->idev, &rawir);
}
- lirc_buffer_write(sz->delay_buf, data);
+ kfifo_in(&sz->fifo, &sz->rawir, sizeof(rawir));
if (!sz->timer_running) {
- sz->delay_timer.expires = jiffies + HZ/10;
+ sz->delay_timer.expires = jiffies + (HZ / 10);
add_timer(&sz->delay_timer);
- sz->timer_running = 1;
+ sz->timer_running = true;
}
spin_unlock_irqrestore(&sz->timer_lock, flags);
}
-static void push_full_pulse(struct usb_streamzap *sz,
- unsigned char value)
+static void sz_push_full_pulse(struct streamzap_ir *sz,
+ unsigned char value)
{
- int pulse;
-
if (sz->idle) {
long deltv;
- int tmp;
sz->signal_last = sz->signal_start;
do_gettimeofday(&sz->signal_start);
- deltv = sz->signal_start.tv_sec-sz->signal_last.tv_sec;
+ deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
+ sz->rawir.pulse = false;
if (deltv > 15) {
/* really long time */
- tmp = LIRC_SPACE(LIRC_VALUE_MASK);
+ sz->rawir.duration = IR_MAX_DURATION;
} else {
- tmp = (int) (deltv*1000000+
- sz->signal_start.tv_usec -
- sz->signal_last.tv_usec);
- tmp -= sz->sum;
- tmp = LIRC_SPACE(tmp);
+ sz->rawir.duration = (int)(deltv * 1000000 +
+ sz->signal_start.tv_usec -
+ sz->signal_last.tv_usec);
+ sz->rawir.duration -= sz->sum;
+ sz->rawir.duration *= 1000;
+ sz->rawir.duration &= IR_MAX_DURATION;
}
- dprintk("ls %u", sz->driver->minor, tmp);
- push(sz, (char *)&tmp);
+ dev_dbg(sz->dev, "ls %u\n", sz->rawir.duration);
+ sz_push(sz);
sz->idle = 0;
sz->sum = 0;
}
- pulse = ((int) value) * STREAMZAP_RESOLUTION;
- pulse += STREAMZAP_RESOLUTION / 2;
- sz->sum += pulse;
- pulse = LIRC_PULSE(pulse);
-
- dprintk("p %u", sz->driver->minor, pulse & PULSE_MASK);
- push(sz, (char *)&pulse);
+ sz->rawir.pulse = true;
+ sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
+ sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
+ sz->sum += sz->rawir.duration;
+ sz->rawir.duration *= 1000;
+ sz->rawir.duration &= IR_MAX_DURATION;
+ dev_dbg(sz->dev, "p %u\n", sz->rawir.duration);
+ sz_push(sz);
}
-static void push_half_pulse(struct usb_streamzap *sz,
- unsigned char value)
+static void sz_push_half_pulse(struct streamzap_ir *sz,
+ unsigned char value)
{
- push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK)>>4);
+ sz_push_full_pulse(sz, (value & STREAMZAP_PULSE_MASK) >> 4);
}
-static void push_full_space(struct usb_streamzap *sz,
- unsigned char value)
+static void sz_push_full_space(struct streamzap_ir *sz,
+ unsigned char value)
{
- int space;
-
- space = ((int) value)*STREAMZAP_RESOLUTION;
- space += STREAMZAP_RESOLUTION/2;
- sz->sum += space;
- space = LIRC_SPACE(space);
- dprintk("s %u", sz->driver->minor, space);
- push(sz, (char *)&space);
+ sz->rawir.pulse = false;
+ sz->rawir.duration = ((int) value) * STREAMZAP_RESOLUTION;
+ sz->rawir.duration += STREAMZAP_RESOLUTION / 2;
+ sz->sum += sz->rawir.duration;
+ sz->rawir.duration *= 1000;
+ dev_dbg(sz->dev, "s %u\n", sz->rawir.duration);
+ sz_push(sz);
}
-static void push_half_space(struct usb_streamzap *sz,
- unsigned char value)
+static void sz_push_half_space(struct streamzap_ir *sz,
+ unsigned long value)
{
- push_full_space(sz, value & STREAMZAP_SPACE_MASK);
+ sz_push_full_space(sz, value & STREAMZAP_SPACE_MASK);
}
/**
- * usb_streamzap_irq - IRQ handler
+ * streamzap_callback - usb IRQ handler callback
*
* This procedure is invoked on reception of data from
* the usb remote.
*/
-static void usb_streamzap_irq(struct urb *urb)
+static void streamzap_callback(struct urb *urb)
{
- struct usb_streamzap *sz;
- int len;
- unsigned int i = 0;
+ struct streamzap_ir *sz;
+ unsigned int i;
+ int len;
+ #if 0
+ static int timeout = (((STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION) &
+ IR_MAX_DURATION) | 0x03000000);
+ #endif
if (!urb)
return;
@@ -366,51 +349,52 @@ static void usb_streamzap_irq(struct urb *urb)
* this urb is terminated, clean up.
* sz might already be invalid at this point
*/
- dprintk("urb status: %d", -1, urb->status);
+ dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
return;
default:
break;
}
- dprintk("received %d", sz->driver->minor, urb->actual_length);
+ dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
if (!sz->flush) {
for (i = 0; i < urb->actual_length; i++) {
- dprintk("%d: %x", sz->driver->minor,
- i, (unsigned char) sz->buf_in[i]);
+ dev_dbg(sz->dev, "%d: %x\n", i,
+ (unsigned char)sz->buf_in[i]);
switch (sz->decoder_state) {
case PulseSpace:
- if ((sz->buf_in[i]&STREAMZAP_PULSE_MASK) ==
+ if ((sz->buf_in[i] & STREAMZAP_PULSE_MASK) ==
STREAMZAP_PULSE_MASK) {
sz->decoder_state = FullPulse;
continue;
- } else if ((sz->buf_in[i]&STREAMZAP_SPACE_MASK)
+ } else if ((sz->buf_in[i] & STREAMZAP_SPACE_MASK)
== STREAMZAP_SPACE_MASK) {
- push_half_pulse(sz, sz->buf_in[i]);
+ sz_push_half_pulse(sz, sz->buf_in[i]);
sz->decoder_state = FullSpace;
continue;
} else {
- push_half_pulse(sz, sz->buf_in[i]);
- push_half_space(sz, sz->buf_in[i]);
+ sz_push_half_pulse(sz, sz->buf_in[i]);
+ sz_push_half_space(sz, sz->buf_in[i]);
}
break;
case FullPulse:
- push_full_pulse(sz, sz->buf_in[i]);
+ sz_push_full_pulse(sz, sz->buf_in[i]);
sz->decoder_state = IgnorePulse;
break;
case FullSpace:
if (sz->buf_in[i] == STREAMZAP_TIMEOUT) {
sz->idle = 1;
- stop_timer(sz);
+ streamzap_stop_timer(sz);
+ #if 0
if (sz->timeout_enabled) {
- int timeout =
- LIRC_TIMEOUT
- (STREAMZAP_TIMEOUT *
- STREAMZAP_RESOLUTION);
- push(sz, (char *)&timeout);
+ sz->rawir.pulse = false;
+ sz->rawir.duration = timeout;
+ sz->rawir.duration *= 1000;
+ sz_push(sz);
}
- flush_delay_buffer(sz);
+ #endif
+ streamzap_flush_delay_buffer(sz);
} else
- push_full_space(sz, sz->buf_in[i]);
+ sz_push_full_space(sz, sz->buf_in[i]);
sz->decoder_state = PulseSpace;
break;
case IgnorePulse:
@@ -419,7 +403,7 @@ static void usb_streamzap_irq(struct urb *urb)
sz->decoder_state = FullSpace;
continue;
}
- push_half_space(sz, sz->buf_in[i]);
+ sz_push_half_space(sz, sz->buf_in[i]);
sz->decoder_state = PulseSpace;
break;
}
@@ -431,16 +415,80 @@ static void usb_streamzap_irq(struct urb *urb)
return;
}
-static const struct file_operations streamzap_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = streamzap_ioctl,
- .read = lirc_dev_fop_read,
- .write = lirc_dev_fop_write,
- .poll = lirc_dev_fop_poll,
- .open = lirc_dev_fop_open,
- .release = lirc_dev_fop_close,
-};
+static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+{
+ struct input_dev *idev;
+ struct ir_dev_props *props;
+ struct device *dev = sz->dev;
+ int ret;
+
+ idev = input_allocate_device();
+ if (!idev) {
+ dev_err(dev, "remote input dev allocation failed\n");
+ goto idev_alloc_failed;
+ }
+
+ props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+ if (!props) {
+ dev_err(dev, "remote ir dev props allocation failed\n");
+ goto props_alloc_failed;
+ }
+
+ snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
+ "Receiver (%04x:%04x)",
+ le16_to_cpu(sz->usbdev->descriptor.idVendor),
+ le16_to_cpu(sz->usbdev->descriptor.idProduct));
+
+ idev->name = sz->name;
+ usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
+ strlcat(sz->phys, "/input0", sizeof(sz->phys));
+ idev->phys = sz->phys;
+
+ props->priv = sz;
+ props->driver_type = RC_DRIVER_IR_RAW;
+ /* FIXME: not sure about supported protocols, check on this */
+ props->allowed_protos = IR_TYPE_RC5 | IR_TYPE_RC6;
+
+ sz->props = props;
+
+ ret = ir_input_register(idev, RC_MAP_RC5_STREAMZAP, props, DRIVER_NAME);
+ if (ret < 0) {
+ dev_err(dev, "remote input device register failed\n");
+ goto irdev_failed;
+ }
+
+ return idev;
+
+irdev_failed:
+ kfree(props);
+props_alloc_failed:
+ input_free_device(idev);
+idev_alloc_failed:
+ return NULL;
+}
+
+static int streamzap_delay_buf_init(struct streamzap_ir *sz)
+{
+ int ret;
+
+ ret = kfifo_alloc(&sz->fifo, sizeof(int) * SZ_BUF_LEN,
+ GFP_KERNEL);
+ if (ret == 0)
+ sz->fifo_initialized = 1;
+ return ret;
+}
+
+static void streamzap_start_flush_timer(struct streamzap_ir *sz)
+{
+ sz->flush_timer.expires = jiffies + HZ;
+ sz->flush = true;
+ add_timer(&sz->flush_timer);
+
+ sz->urb_in->dev = sz->usbdev;
+ if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
+ dev_err(sz->dev, "urb submit failed\n");
+}
/**
* streamzap_probe
@@ -449,33 +497,30 @@ static const struct file_operations streamzap_fops = {
* On any failure the return value is the ERROR
* On success return 0
*/
-static int streamzap_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
+static int __devinit streamzap_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
{
- struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_device *usbdev = interface_to_usbdev(intf);
struct usb_host_interface *iface_host;
- struct usb_streamzap *sz;
- struct lirc_driver *driver;
- struct lirc_buffer *lirc_buf;
- struct lirc_buffer *delay_buf;
+ struct streamzap_ir *sz = NULL;
char buf[63], name[128] = "";
int retval = -ENOMEM;
- int minor = 0;
+ int pipe, maxp;
/* Allocate space for device driver specific data */
- sz = kzalloc(sizeof(struct usb_streamzap), GFP_KERNEL);
- if (sz == NULL)
+ sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
+ if (!sz)
return -ENOMEM;
- sz->udev = udev;
- sz->interface = interface;
+ sz->usbdev = usbdev;
+ sz->interface = intf;
/* Check to ensure endpoint information matches requirements */
- iface_host = interface->cur_altsetting;
+ iface_host = intf->cur_altsetting;
if (iface_host->desc.bNumEndpoints != 1) {
- err("%s: Unexpected desc.bNumEndpoints (%d)", __func__,
- iface_host->desc.bNumEndpoints);
+ dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
+ __func__, iface_host->desc.bNumEndpoints);
retval = -ENODEV;
goto free_sz;
}
@@ -483,219 +528,110 @@ static int streamzap_probe(struct usb_interface *interface,
sz->endpoint = &(iface_host->endpoint[0].desc);
if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
!= USB_DIR_IN) {
- err("%s: endpoint doesn't match input device 02%02x",
- __func__, sz->endpoint->bEndpointAddress);
+ dev_err(&intf->dev, "%s: endpoint doesn't match input device "
+ "02%02x\n", __func__, sz->endpoint->bEndpointAddress);
retval = -ENODEV;
goto free_sz;
}
if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_INT) {
- err("%s: endpoint attributes don't match xfer 02%02x",
- __func__, sz->endpoint->bmAttributes);
+ dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
+ "02%02x\n", __func__, sz->endpoint->bmAttributes);
retval = -ENODEV;
goto free_sz;
}
- if (sz->endpoint->wMaxPacketSize == 0) {
- err("%s: endpoint message size==0? ", __func__);
+ pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
+
+ if (maxp == 0) {
+ dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
+ __func__);
retval = -ENODEV;
goto free_sz;
}
/* Allocate the USB buffer and IRQ URB */
-
- sz->buf_in_len = sz->endpoint->wMaxPacketSize;
- sz->buf_in = usb_alloc_coherent(sz->udev, sz->buf_in_len,
- GFP_ATOMIC, &sz->dma_in);
- if (sz->buf_in == NULL)
+ sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
+ if (!sz->buf_in)
goto free_sz;
sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
- if (sz->urb_in == NULL)
- goto free_sz;
-
- /* Connect this device to the LIRC sub-system */
- driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
- if (!driver)
- goto free_sz;
+ if (!sz->urb_in)
+ goto free_buf_in;
- lirc_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
- if (!lirc_buf)
- goto free_driver;
- if (lirc_buffer_init(lirc_buf, sizeof(int), STREAMZAP_BUF_LEN))
- goto kfree_lirc_buf;
-
- delay_buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
- if (!delay_buf)
- goto free_lirc_buf;
- if (lirc_buffer_init(delay_buf, sizeof(int), STREAMZAP_BUF_LEN))
- goto kfree_delay_buf;
-
- sz->driver = driver;
- strcpy(sz->driver->name, DRIVER_NAME);
- sz->driver->minor = -1;
- sz->driver->sample_rate = 0;
- sz->driver->code_length = sizeof(int) * 8;
- sz->driver->features = LIRC_CAN_REC_MODE2 |
- LIRC_CAN_GET_REC_RESOLUTION |
- LIRC_CAN_SET_REC_TIMEOUT;
- sz->driver->data = sz;
- sz->driver->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
- sz->driver->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION;
- sz->driver->rbuf = lirc_buf;
- sz->delay_buf = delay_buf;
- sz->driver->set_use_inc = &streamzap_use_inc;
- sz->driver->set_use_dec = &streamzap_use_dec;
- sz->driver->fops = &streamzap_fops;
- sz->driver->dev = &interface->dev;
- sz->driver->owner = THIS_MODULE;
-
- sz->idle = 1;
- sz->decoder_state = PulseSpace;
- init_timer(&sz->delay_timer);
- sz->delay_timer.function = delay_timeout;
- sz->delay_timer.data = (unsigned long) sz;
- sz->timer_running = 0;
- spin_lock_init(&sz->timer_lock);
-
- init_timer(&sz->flush_timer);
- sz->flush_timer.function = flush_timeout;
- sz->flush_timer.data = (unsigned long) sz;
- /* Complete final initialisations */
+ sz->dev = &intf->dev;
+ sz->buf_in_len = maxp;
- usb_fill_int_urb(sz->urb_in, udev,
- usb_rcvintpipe(udev, sz->endpoint->bEndpointAddress),
- sz->buf_in, sz->buf_in_len, usb_streamzap_irq, sz,
- sz->endpoint->bInterval);
- sz->urb_in->transfer_dma = sz->dma_in;
- sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- if (udev->descriptor.iManufacturer
- && usb_string(udev, udev->descriptor.iManufacturer,
+ if (usbdev->descriptor.iManufacturer
+ && usb_string(usbdev, usbdev->descriptor.iManufacturer,
buf, sizeof(buf)) > 0)
strlcpy(name, buf, sizeof(name));
- if (udev->descriptor.iProduct
- && usb_string(udev, udev->descriptor.iProduct,
+ if (usbdev->descriptor.iProduct
+ && usb_string(usbdev, usbdev->descriptor.iProduct,
buf, sizeof(buf)) > 0)
snprintf(name + strlen(name), sizeof(name) - strlen(name),
" %s", buf);
- minor = lirc_register_driver(driver);
-
- if (minor < 0)
- goto free_delay_buf;
-
- sz->driver->minor = minor;
-
- usb_set_intfdata(interface, sz);
-
- printk(KERN_INFO DRIVER_NAME "[%d]: %s on usb%d:%d attached\n",
- sz->driver->minor, name,
- udev->bus->busnum, sz->udev->devnum);
-
- return 0;
-
-free_delay_buf:
- lirc_buffer_free(sz->delay_buf);
-kfree_delay_buf:
- kfree(delay_buf);
-free_lirc_buf:
- lirc_buffer_free(sz->driver->rbuf);
-kfree_lirc_buf:
- kfree(lirc_buf);
-free_driver:
- kfree(driver);
-free_sz:
- if (retval == -ENOMEM)
- err("Out of memory");
-
- if (sz) {
- usb_free_urb(sz->urb_in);
- usb_free_coherent(udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
- kfree(sz);
- }
-
- return retval;
-}
-
-static int streamzap_use_inc(void *data)
-{
- struct usb_streamzap *sz = data;
-
- if (!sz) {
- dprintk("%s called with no context", -1, __func__);
- return -EINVAL;
+ retval = streamzap_delay_buf_init(sz);
+ if (retval) {
+ dev_err(&intf->dev, "%s: delay buffer init failed\n", __func__);
+ goto free_urb_in;
}
- dprintk("set use inc", sz->driver->minor);
- lirc_buffer_clear(sz->driver->rbuf);
- lirc_buffer_clear(sz->delay_buf);
+ sz->idev = streamzap_init_input_dev(sz);
+ if (!sz->idev)
+ goto input_dev_fail;
- sz->flush_timer.expires = jiffies + HZ;
- sz->flush = 1;
- add_timer(&sz->flush_timer);
+ sz->idle = true;
+ sz->decoder_state = PulseSpace;
+ #if 0
+ /* not yet supported, depends on patches from maxim */
+ /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
+ sz->timeout_enabled = false;
+ sz->min_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
+ sz->max_timeout = STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION * 1000;
+ #endif
- sz->urb_in->dev = sz->udev;
- if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
- dprintk("open result = -EIO error submitting urb",
- sz->driver->minor);
- return -EIO;
- }
- sz->in_use++;
+ init_timer(&sz->delay_timer);
+ sz->delay_timer.function = streamzap_delay_timeout;
+ sz->delay_timer.data = (unsigned long)sz;
+ spin_lock_init(&sz->timer_lock);
- return 0;
-}
+ init_timer(&sz->flush_timer);
+ sz->flush_timer.function = streamzap_flush_timeout;
+ sz->flush_timer.data = (unsigned long)sz;
-static void streamzap_use_dec(void *data)
-{
- struct usb_streamzap *sz = data;
+ do_gettimeofday(&sz->signal_start);
- if (!sz) {
- dprintk("%s called with no context", -1, __func__);
- return;
- }
- dprintk("set use dec", sz->driver->minor);
+ /* Complete final initialisations */
+ usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
+ maxp, (usb_complete_t)streamzap_callback,
+ sz, sz->endpoint->bInterval);
+ sz->urb_in->transfer_dma = sz->dma_in;
+ sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- if (sz->flush) {
- sz->flush = 0;
- del_timer_sync(&sz->flush_timer);
- }
+ usb_set_intfdata(intf, sz);
- usb_kill_urb(sz->urb_in);
+ streamzap_start_flush_timer(sz);
- stop_timer(sz);
+ dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
+ usbdev->bus->busnum, usbdev->devnum);
- sz->in_use--;
-}
+ return 0;
-static long streamzap_ioctl(struct file *filep, unsigned int cmd,
- unsigned long arg)
-{
- int result = 0;
- int val;
- struct usb_streamzap *sz = lirc_get_pdata(filep);
+input_dev_fail:
+ kfifo_free(&sz->fifo);
+free_urb_in:
+ usb_free_urb(sz->urb_in);
+free_buf_in:
+ usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
+free_sz:
+ kfree(sz);
- switch (cmd) {
- case LIRC_GET_REC_RESOLUTION:
- result = put_user(STREAMZAP_RESOLUTION, (unsigned int *) arg);
- break;
- case LIRC_SET_REC_TIMEOUT:
- result = get_user(val, (int *)arg);
- if (result == 0) {
- if (val == STREAMZAP_TIMEOUT * STREAMZAP_RESOLUTION)
- sz->timeout_enabled = 1;
- else if (val == 0)
- sz->timeout_enabled = 0;
- else
- result = -EINVAL;
- }
- break;
- default:
- return lirc_dev_fop_ioctl(filep, cmd, arg);
- }
- return result;
+ return retval;
}
/**
@@ -704,116 +640,100 @@ static long streamzap_ioctl(struct file *filep, unsigned int cmd,
* Called by the usb core when the device is removed from the system.
*
* This routine guarantees that the driver will not submit any more urbs
- * by clearing dev->udev. It is also supposed to terminate any currently
+ * by clearing dev->usbdev. It is also supposed to terminate any currently
* active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
* does not provide any way to do this.
*/
static void streamzap_disconnect(struct usb_interface *interface)
{
- struct usb_streamzap *sz;
- int errnum;
- int minor;
-
- sz = usb_get_intfdata(interface);
+ struct streamzap_ir *sz = usb_get_intfdata(interface);
+ struct usb_device *usbdev = interface_to_usbdev(interface);
- /* unregister from the LIRC sub-system */
+ usb_set_intfdata(interface, NULL);
- errnum = lirc_unregister_driver(sz->driver->minor);
- if (errnum != 0)
- dprintk("error in lirc_unregister: (returned %d)",
- sz->driver->minor, errnum);
+ if (!sz)
+ return;
- lirc_buffer_free(sz->delay_buf);
- lirc_buffer_free(sz->driver->rbuf);
+ if (sz->flush) {
+ sz->flush = false;
+ del_timer_sync(&sz->flush_timer);
+ }
- /* unregister from the USB sub-system */
+ streamzap_stop_timer(sz);
+ sz->usbdev = NULL;
+ ir_input_unregister(sz->idev);
+ usb_kill_urb(sz->urb_in);
usb_free_urb(sz->urb_in);
+ usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
- usb_free_coherent(sz->udev, sz->buf_in_len, sz->buf_in, sz->dma_in);
-
- minor = sz->driver->minor;
- kfree(sz->driver->rbuf);
- kfree(sz->driver);
- kfree(sz->delay_buf);
kfree(sz);
-
- printk(KERN_INFO DRIVER_NAME "[%d]: disconnected\n", minor);
}
static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
{
- struct usb_streamzap *sz = usb_get_intfdata(intf);
+ struct streamzap_ir *sz = usb_get_intfdata(intf);
- printk(KERN_INFO DRIVER_NAME "[%d]: suspend\n", sz->driver->minor);
- if (sz->in_use) {
- if (sz->flush) {
- sz->flush = 0;
- del_timer_sync(&sz->flush_timer);
- }
+ if (sz->flush) {
+ sz->flush = false;
+ del_timer_sync(&sz->flush_timer);
+ }
- stop_timer(sz);
+ streamzap_stop_timer(sz);
+
+ usb_kill_urb(sz->urb_in);
- usb_kill_urb(sz->urb_in);
- }
return 0;
}
static int streamzap_resume(struct usb_interface *intf)
{
- struct usb_streamzap *sz = usb_get_intfdata(intf);
+ struct streamzap_ir *sz = usb_get_intfdata(intf);
- lirc_buffer_clear(sz->driver->rbuf);
- lirc_buffer_clear(sz->delay_buf);
+ if (sz->fifo_initialized)
+ kfifo_reset(&sz->fifo);
- if (sz->in_use) {
- sz->flush_timer.expires = jiffies + HZ;
- sz->flush = 1;
- add_timer(&sz->flush_timer);
+ sz->flush_timer.expires = jiffies + HZ;
+ sz->flush = true;
+ add_timer(&sz->flush_timer);
- sz->urb_in->dev = sz->udev;
- if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
- dprintk("open result = -EIO error submitting urb",
- sz->driver->minor);
- return -EIO;
- }
+ if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+ dev_err(sz->dev, "Error sumbiting urb\n");
+ return -EIO;
}
+
return 0;
}
/**
- * usb_streamzap_init
+ * streamzap_init
*/
-static int __init usb_streamzap_init(void)
+static int __init streamzap_init(void)
{
- int result;
+ int ret;
/* register this driver with the USB subsystem */
- result = usb_register(&streamzap_driver);
-
- if (result) {
- err("usb_register failed. Error number %d",
- result);
- return result;
- }
+ ret = usb_register(&streamzap_driver);
+ if (ret < 0)
+ printk(KERN_ERR DRIVER_NAME ": usb register failed, "
+ "result = %d\n", ret);
- printk(KERN_INFO DRIVER_NAME " " DRIVER_VERSION " registered\n");
- return 0;
+ return ret;
}
/**
- * usb_streamzap_exit
+ * streamzap_exit
*/
-static void __exit usb_streamzap_exit(void)
+static void __exit streamzap_exit(void)
{
usb_deregister(&streamzap_driver);
}
-module_init(usb_streamzap_init);
-module_exit(usb_streamzap_exit);
+module_init(streamzap_init);
+module_exit(streamzap_exit);
-MODULE_AUTHOR("Christoph Bartelmus, Greg Wickham, Adrian Dewhurst");
+MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 9569d0863f8b9..a9c041d496625 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -114,6 +114,7 @@ void rc_map_init(void);
#define RC_MAP_PURPLETV "rc-purpletv"
#define RC_MAP_PV951 "rc-pv951"
#define RC_MAP_RC5_HAUPPAUGE_NEW "rc-rc5-hauppauge-new"
+#define RC_MAP_RC5_STREAMZAP "rc-rc5-streamzap"
#define RC_MAP_RC5_TV "rc-rc5-tv"
#define RC_MAP_RC6_MCE "rc-rc6-mce"
#define RC_MAP_REAL_AUDIO_220_32_KEYS "rc-real-audio-220-32-keys"
--
GitLab
From 2c1101d5aeddda7bd0dd03bddea7aed6dbf80074 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Mon, 2 Aug 2010 15:46:03 -0300
Subject: [PATCH 467/863] V4L/DVB: IR: put newly ported streamzap driver in
proper home
Moves drivers/staging/lirc/lirc_streamzap.c to
drivers/media/IR/streamzap.c, along with making the requisite Kconfig
and Makefile changes.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/Kconfig | 12 ++++++++++++
drivers/media/IR/Makefile | 1 +
.../lirc/lirc_streamzap.c => media/IR/streamzap.c} | 0
drivers/staging/lirc/Kconfig | 6 ------
drivers/staging/lirc/Makefile | 1 -
5 files changed, 13 insertions(+), 7 deletions(-)
rename drivers/{staging/lirc/lirc_streamzap.c => media/IR/streamzap.c} (100%)
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index 999a8250b3cee..4094490106a6a 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -103,3 +103,15 @@ config IR_MCEUSB
To compile this driver as a module, choose M here: the
module will be called mceusb.
+
+config IR_STREAMZAP
+ tristate "Streamzap PC Remote IR Receiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on IR_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a Streamzap PC Remote
+ Infrared Receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called streamzap.
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index 2ae4f3abfdbd0..2566fb4f356e7 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
# stand-alone IR receivers/transmitters
obj-$(CONFIG_IR_IMON) += imon.o
obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
diff --git a/drivers/staging/lirc/lirc_streamzap.c b/drivers/media/IR/streamzap.c
similarity index 100%
rename from drivers/staging/lirc/lirc_streamzap.c
rename to drivers/media/IR/streamzap.c
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
index ab30a098efcc5..7db8cb68ab5d6 100644
--- a/drivers/staging/lirc/Kconfig
+++ b/drivers/staging/lirc/Kconfig
@@ -90,12 +90,6 @@ config LIRC_SIR
help
Driver for the SIR IrDA port
-config LIRC_STREAMZAP
- tristate "Streamzap PC Receiver"
- depends on LIRC_STAGING && USB
- help
- Driver for the Streamzap PC Receiver
-
config LIRC_TTUSBIR
tristate "Technotrend USB IR Receiver"
depends on LIRC_STAGING && USB
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile
index a019182a7a388..bd789d8a0177e 100644
--- a/drivers/staging/lirc/Makefile
+++ b/drivers/staging/lirc/Makefile
@@ -14,6 +14,5 @@ obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o
obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o
obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o
obj-$(CONFIG_LIRC_SIR) += lirc_sir.o
-obj-$(CONFIG_LIRC_STREAMZAP) += lirc_streamzap.o
obj-$(CONFIG_LIRC_TTUSBIR) += lirc_ttusbir.o
obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o
--
GitLab
From ade321c5b8a0e4d40c0f3b73bf0d2579850028d0 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:14 -0300
Subject: [PATCH 468/863] V4L/DVB: IR: Kconfig fixes
Move IR drives below separate menu.
This allows to disable them.
Also correct a typo.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/Kconfig | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index 4094490106a6a..9e8f82d85cb30 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -1,8 +1,10 @@
-config IR_CORE
- tristate
+menuconfig IR_CORE
+ tristate "Infrared remote controller adapters"
depends on INPUT
default INPUT
+if IR_CORE
+
config VIDEO_IR
tristate
depends on IR_CORE
@@ -16,7 +18,7 @@ config LIRC
Enable this option to build the Linux Infrared Remote
Control (LIRC) core device interface driver. The LIRC
interface passes raw IR to and from userspace, where the
- LIRC daemon handles protocol decoding for IR reception ann
+ LIRC daemon handles protocol decoding for IR reception and
encoding for IR transmitting (aka "blasting").
source "drivers/media/IR/keymaps/Kconfig"
@@ -115,3 +117,5 @@ config IR_STREAMZAP
To compile this driver as a module, choose M here: the
module will be called streamzap.
+
+endif #IR_CORE
--
GitLab
From 510fcb70ff375b0cec6638fcfafdf36233690bfc Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:15 -0300
Subject: [PATCH 469/863] V4L/DVB: IR: minor fixes
* lirc: Don't propagate reset event to userspace
* lirc: Remove strange logic from lirc that would make first sample always be pulse
* Make TO_US macro actualy print what it should.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-core-priv.h | 4 +---
drivers/media/IR/ir-lirc-codec.c | 14 ++++++++------
drivers/media/IR/ir-raw-event.c | 3 +++
3 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index babd52061bc3a..dc26e2beeefb0 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -76,7 +76,6 @@ struct ir_raw_event_ctrl {
struct lirc_codec {
struct ir_input_dev *ir_dev;
struct lirc_driver *drv;
- int lircdata;
} lirc;
};
@@ -104,10 +103,9 @@ static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
ev->duration -= duration;
}
-#define TO_US(duration) (((duration) + 500) / 1000)
+#define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000)
#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space")
#define IS_RESET(ev) (ev.duration == 0)
-
/*
* Routines from ir-sysfs.c - Meant to be called only internally inside
* ir-core
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
index 3ba482d96c4b1..8ca01fd67139b 100644
--- a/drivers/media/IR/ir-lirc-codec.c
+++ b/drivers/media/IR/ir-lirc-codec.c
@@ -32,6 +32,7 @@
static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ int sample;
if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
return 0;
@@ -39,18 +40,21 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
return -EINVAL;
+ if (IS_RESET(ev))
+ return 0;
+
IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
TO_US(ev.duration), TO_STR(ev.pulse));
- ir_dev->raw->lirc.lircdata += ev.duration / 1000;
+
+ sample = ev.duration / 1000;
if (ev.pulse)
- ir_dev->raw->lirc.lircdata |= PULSE_BIT;
+ sample |= PULSE_BIT;
lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
- (unsigned char *) &ir_dev->raw->lirc.lircdata);
+ (unsigned char *) &sample);
wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
- ir_dev->raw->lirc.lircdata = 0;
return 0;
}
@@ -224,8 +228,6 @@ static int ir_lirc_register(struct input_dev *input_dev)
ir_dev->raw->lirc.drv = drv;
ir_dev->raw->lirc.ir_dev = ir_dev;
- ir_dev->raw->lirc.lircdata = PULSE_MASK;
-
return 0;
lirc_register_failed:
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 6f192ef31db1a..51f65daa086bb 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -66,6 +66,9 @@ int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
if (!ir->raw)
return -EINVAL;
+ IR_dprintk(2, "sample: (05%dus %s)\n",
+ TO_US(ev->duration), TO_STR(ev->pulse));
+
if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
return -ENOMEM;
--
GitLab
From 45a568fa6f6bf8e5b9c32e52292f297e8473a985 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:16 -0300
Subject: [PATCH 470/863] V4L/DVB: IR: replace spinlock with mutex
Some handlers (lirc for example) allocates memory on initialization,
doing so in atomic context is cumbersome.
Fixes warning about sleeping function in atomic context.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-raw-event.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 51f65daa086bb..9d5c029cfc0c0 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -13,7 +13,7 @@
*/
#include <linux/workqueue.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/sched.h>
#include "ir-core-priv.h"
@@ -24,7 +24,7 @@
static LIST_HEAD(ir_raw_client_list);
/* Used to handle IR raw handler extensions */
-static DEFINE_SPINLOCK(ir_raw_handler_lock);
+static DEFINE_MUTEX(ir_raw_handler_lock);
static LIST_HEAD(ir_raw_handler_list);
static u64 available_protocols;
@@ -41,10 +41,10 @@ static void ir_raw_event_work(struct work_struct *work)
container_of(work, struct ir_raw_event_ctrl, rx_work);
while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
list_for_each_entry(handler, &ir_raw_handler_list, list)
handler->decode(raw->input_dev, ev);
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
raw->prev_ev = ev;
}
}
@@ -150,9 +150,9 @@ u64
ir_raw_get_allowed_protocols()
{
u64 protocols;
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
protocols = available_protocols;
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
return protocols;
}
@@ -180,12 +180,12 @@ int ir_raw_event_register(struct input_dev *input_dev)
return rc;
}
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
list_add_tail(&ir->raw->list, &ir_raw_client_list);
list_for_each_entry(handler, &ir_raw_handler_list, list)
if (handler->raw_register)
handler->raw_register(ir->raw->input_dev);
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
return 0;
}
@@ -200,12 +200,12 @@ void ir_raw_event_unregister(struct input_dev *input_dev)
cancel_work_sync(&ir->raw->rx_work);
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
list_del(&ir->raw->list);
list_for_each_entry(handler, &ir_raw_handler_list, list)
if (handler->raw_unregister)
handler->raw_unregister(ir->raw->input_dev);
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
kfifo_free(&ir->raw->kfifo);
kfree(ir->raw);
@@ -220,13 +220,13 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
{
struct ir_raw_event_ctrl *raw;
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
if (ir_raw_handler->raw_register)
list_for_each_entry(raw, &ir_raw_client_list, list)
ir_raw_handler->raw_register(raw->input_dev);
available_protocols |= ir_raw_handler->protocols;
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
return 0;
}
@@ -236,13 +236,13 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
{
struct ir_raw_event_ctrl *raw;
- spin_lock(&ir_raw_handler_lock);
+ mutex_lock(&ir_raw_handler_lock);
list_del(&ir_raw_handler->list);
if (ir_raw_handler->raw_unregister)
list_for_each_entry(raw, &ir_raw_client_list, list)
ir_raw_handler->raw_unregister(raw->input_dev);
available_protocols &= ~ir_raw_handler->protocols;
- spin_unlock(&ir_raw_handler_lock);
+ mutex_unlock(&ir_raw_handler_lock);
}
EXPORT_SYMBOL(ir_raw_handler_unregister);
--
GitLab
From 0d2cb1de8e81ffc06df67853be5ead3556d3a6b5 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:17 -0300
Subject: [PATCH 471/863] V4L/DVB: IR: replace workqueue with kthread
It is perfectly possible to have ir_raw_event_work
running concurently on two cpus, thus we must protect
it from that situation.
This stems from the fact that if hardware sends short packets of samples
we might end up queueing the work item more times that nessesary.
Such job isn't well suited for a workqueue, so use a kernel thread.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-core-priv.h | 2 +-
drivers/media/IR/ir-raw-event.c | 42 ++++++++++++++++++++++++---------
2 files changed, 32 insertions(+), 12 deletions(-)
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index dc26e2beeefb0..84c7a9a5cad45 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -32,7 +32,7 @@ struct ir_raw_handler {
struct ir_raw_event_ctrl {
struct list_head list; /* to keep track of raw clients */
- struct work_struct rx_work; /* for the rx decoding workqueue */
+ struct task_struct *thread;
struct kfifo kfifo; /* fifo for the pulse/space durations */
ktime_t last_event; /* when last event occurred */
enum raw_event_type last_type; /* last event type */
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 9d5c029cfc0c0..d0c18db4c0d37 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -12,9 +12,10 @@
* GNU General Public License for more details.
*/
-#include <linux/workqueue.h>
+#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/sched.h>
+#include <linux/freezer.h>
#include "ir-core-priv.h"
/* Define the max number of pulse/space transitions to buffer */
@@ -33,20 +34,30 @@ static u64 available_protocols;
static struct work_struct wq_load;
#endif
-static void ir_raw_event_work(struct work_struct *work)
+static int ir_raw_event_thread(void *data)
{
struct ir_raw_event ev;
struct ir_raw_handler *handler;
- struct ir_raw_event_ctrl *raw =
- container_of(work, struct ir_raw_event_ctrl, rx_work);
+ struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+
+ while (!kthread_should_stop()) {
+ try_to_freeze();
- while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
mutex_lock(&ir_raw_handler_lock);
- list_for_each_entry(handler, &ir_raw_handler_list, list)
- handler->decode(raw->input_dev, ev);
+
+ while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) {
+ list_for_each_entry(handler, &ir_raw_handler_list, list)
+ handler->decode(raw->input_dev, ev);
+ raw->prev_ev = ev;
+ }
+
mutex_unlock(&ir_raw_handler_lock);
- raw->prev_ev = ev;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
}
+
+ return 0;
}
/**
@@ -141,7 +152,7 @@ void ir_raw_event_handle(struct input_dev *input_dev)
if (!ir->raw)
return;
- schedule_work(&ir->raw->rx_work);
+ wake_up_process(ir->raw->thread);
}
EXPORT_SYMBOL_GPL(ir_raw_event_handle);
@@ -170,7 +181,7 @@ int ir_raw_event_register(struct input_dev *input_dev)
return -ENOMEM;
ir->raw->input_dev = input_dev;
- INIT_WORK(&ir->raw->rx_work, ir_raw_event_work);
+
ir->raw->enabled_protocols = ~0;
rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
GFP_KERNEL);
@@ -180,6 +191,15 @@ int ir_raw_event_register(struct input_dev *input_dev)
return rc;
}
+ ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+ "rc%u", (unsigned int)ir->devno);
+
+ if (IS_ERR(ir->raw->thread)) {
+ kfree(ir->raw);
+ ir->raw = NULL;
+ return PTR_ERR(ir->raw->thread);
+ }
+
mutex_lock(&ir_raw_handler_lock);
list_add_tail(&ir->raw->list, &ir_raw_client_list);
list_for_each_entry(handler, &ir_raw_handler_list, list)
@@ -198,7 +218,7 @@ void ir_raw_event_unregister(struct input_dev *input_dev)
if (!ir->raw)
return;
- cancel_work_sync(&ir->raw->rx_work);
+ kthread_stop(ir->raw->thread);
mutex_lock(&ir_raw_handler_lock);
list_del(&ir->raw->list);
--
GitLab
From 39b2c0687b238d8bce19d5e8c0c8dc4e7fe50ed4 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:18 -0300
Subject: [PATCH 472/863] V4L/DVB: IR: JVC: make repeat work
Currently, jvc decoder will attempt misdetect next press as a repeat
of last keypress, therefore second keypress isn't detected.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-jvc-decoder.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/media/IR/ir-jvc-decoder.c b/drivers/media/IR/ir-jvc-decoder.c
index 8894d8b360486..77a89c4de0143 100644
--- a/drivers/media/IR/ir-jvc-decoder.c
+++ b/drivers/media/IR/ir-jvc-decoder.c
@@ -32,6 +32,7 @@ enum jvc_state {
STATE_BIT_SPACE,
STATE_TRAILER_PULSE,
STATE_TRAILER_SPACE,
+ STATE_CHECK_REPEAT,
};
/**
@@ -60,6 +61,7 @@ static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+again:
switch (data->state) {
case STATE_INACTIVE:
@@ -149,8 +151,18 @@ static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
}
data->count = 0;
- data->state = STATE_BIT_PULSE;
+ data->state = STATE_CHECK_REPEAT;
return 0;
+
+ case STATE_CHECK_REPEAT:
+ if (!ev.pulse)
+ break;
+
+ if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+ data->state = STATE_INACTIVE;
+ else
+ data->state = STATE_BIT_PULSE;
+ goto again;
}
out:
--
GitLab
From e31f41278f0bed38ee16b55d09b49bed2f1b2085 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:19 -0300
Subject: [PATCH 473/863] V4L/DVB: IR: nec decoder: fix repeat
Repeat space is 4 units, not 8.
Current code would never trigger a repeat.
However that isn't true for NECX, so repeat there
must be handled differently.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-nec-decoder.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
index 52e0f378ae3df..1c0cf0300d2d9 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/IR/ir-nec-decoder.c
@@ -20,7 +20,7 @@
#define NEC_HEADER_PULSE (16 * NEC_UNIT)
#define NECX_HEADER_PULSE (8 * NEC_UNIT) /* Less common NEC variant */
#define NEC_HEADER_SPACE (8 * NEC_UNIT)
-#define NEC_REPEAT_SPACE (8 * NEC_UNIT)
+#define NEC_REPEAT_SPACE (4 * NEC_UNIT)
#define NEC_BIT_PULSE (1 * NEC_UNIT)
#define NEC_BIT_0_SPACE (1 * NEC_UNIT)
#define NEC_BIT_1_SPACE (3 * NEC_UNIT)
--
GitLab
From 86ff071cad3e7e4c7469b3941bfced6fe9b04b5f Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:20 -0300
Subject: [PATCH 474/863] V4L/DVB: IR: NECX: support repeat
This adds support for repeat detecting for NECX variant
Tested with uneversal remote
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-core-priv.h | 2 ++
drivers/media/IR/ir-nec-decoder.c | 23 +++++++++++++++++++++--
2 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 84c7a9a5cad45..502d477b391cd 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -45,6 +45,8 @@ struct ir_raw_event_ctrl {
int state;
unsigned count;
u32 bits;
+ bool is_nec_x;
+ bool necx_repeat;
} nec;
struct rc5_dec {
int state;
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
index 1c0cf0300d2d9..d597421d65470 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/IR/ir-nec-decoder.c
@@ -26,6 +26,7 @@
#define NEC_BIT_1_SPACE (3 * NEC_UNIT)
#define NEC_TRAILER_PULSE (1 * NEC_UNIT)
#define NEC_TRAILER_SPACE (10 * NEC_UNIT) /* even longer in reality */
+#define NECX_REPEAT_BITS 1
enum nec_state {
STATE_INACTIVE,
@@ -67,8 +68,12 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
if (!ev.pulse)
break;
- if (!eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2) &&
- !eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+ if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) {
+ data->is_nec_x = false;
+ data->necx_repeat = false;
+ } else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+ data->is_nec_x = true;
+ else
break;
data->count = 0;
@@ -105,6 +110,17 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
if (ev.pulse)
break;
+ if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
+ geq_margin(ev.duration,
+ NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
+ IR_dprintk(1, "Repeat last key\n");
+ ir_repeat(input_dev);
+ data->state = STATE_INACTIVE;
+ return 0;
+
+ } else if (data->count > NECX_REPEAT_BITS)
+ data->necx_repeat = false;
+
data->bits <<= 1;
if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
data->bits |= 1;
@@ -159,6 +175,9 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
IR_dprintk(1, "NEC scancode 0x%04x\n", scancode);
}
+ if (data->is_nec_x)
+ data->necx_repeat = true;
+
ir_keydown(input_dev, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
--
GitLab
From b378f43fe9466e7712a8b16be64795ffca3a937e Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:21 -0300
Subject: [PATCH 475/863] V4L/DVB: IR: Allow not to compile keymaps in
Currently, ir device registration fails if keymap requested by driver is not found.
Fix that by always compiling in the empty keymap, and using it as a failback.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-core-priv.h | 3 +-
drivers/media/IR/ir-sysfs.c | 2 ++
drivers/media/IR/keymaps/Makefile | 1 -
drivers/media/IR/keymaps/rc-empty.c | 44 -----------------------------
drivers/media/IR/rc-map.c | 23 +++++++++++++++
include/media/ir-core.h | 8 ++++--
6 files changed, 33 insertions(+), 48 deletions(-)
delete mode 100644 drivers/media/IR/keymaps/rc-empty.c
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 502d477b391cd..be6817261c8fe 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -126,7 +126,8 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
void ir_raw_init(void);
-
+int ir_rcmap_init(void);
+void ir_rcmap_cleanup(void);
/*
* Decoder initialization code
*
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
index 6273047e915b4..96dafc425c8e6 100644
--- a/drivers/media/IR/ir-sysfs.c
+++ b/drivers/media/IR/ir-sysfs.c
@@ -325,6 +325,7 @@ static int __init ir_core_init(void)
/* Initialize/load the decoders/keymap code that will be used */
ir_raw_init();
+ ir_rcmap_init();
return 0;
}
@@ -332,6 +333,7 @@ static int __init ir_core_init(void)
static void __exit ir_core_exit(void)
{
class_unregister(&ir_input_class);
+ ir_rcmap_cleanup();
}
module_init(ir_core_init);
diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/IR/keymaps/Makefile
index c9fcc41944e97..950e5d953c6f1 100644
--- a/drivers/media/IR/keymaps/Makefile
+++ b/drivers/media/IR/keymaps/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
rc-dm1105-nec.o \
rc-dntv-live-dvb-t.o \
rc-dntv-live-dvbt-pro.o \
- rc-empty.o \
rc-em-terratec.o \
rc-encore-enltv2.o \
rc-encore-enltv.o \
diff --git a/drivers/media/IR/keymaps/rc-empty.c b/drivers/media/IR/keymaps/rc-empty.c
deleted file mode 100644
index 3b338d84b476f..0000000000000
--- a/drivers/media/IR/keymaps/rc-empty.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* empty.h - Keytable for empty Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* empty keytable, can be used as placeholder for not-yet created keytables */
-
-static struct ir_scancode empty[] = {
- { 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
- .map = {
- .scan = empty,
- .size = ARRAY_SIZE(empty),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_EMPTY,
- }
-};
-
-static int __init init_rc_map_empty(void)
-{
- return ir_register_map(&empty_map);
-}
-
-static void __exit exit_rc_map_empty(void)
-{
- ir_unregister_map(&empty_map);
-}
-
-module_init(init_rc_map_empty)
-module_exit(exit_rc_map_empty)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/rc-map.c b/drivers/media/IR/rc-map.c
index 46a8f1524b5ba..689143f2fff07 100644
--- a/drivers/media/IR/rc-map.c
+++ b/drivers/media/IR/rc-map.c
@@ -82,3 +82,26 @@ void ir_unregister_map(struct rc_keymap *map)
}
EXPORT_SYMBOL_GPL(ir_unregister_map);
+
+static struct ir_scancode empty[] = {
+ { 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+ .map = {
+ .scan = empty,
+ .size = ARRAY_SIZE(empty),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_EMPTY,
+ }
+};
+
+int ir_rcmap_init(void)
+{
+ return ir_register_map(&empty_map);
+}
+
+void ir_rcmap_cleanup(void)
+{
+ ir_unregister_map(&empty_map);
+}
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 513e60dd10101..197d05aa83dc4 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -110,8 +110,12 @@ static inline int ir_input_register(struct input_dev *dev,
return -EINVAL;
ir_codes = get_rc_map(map_name);
- if (!ir_codes)
- return -EINVAL;
+ if (!ir_codes) {
+ ir_codes = get_rc_map(RC_MAP_EMPTY);
+
+ if (!ir_codes)
+ return -EINVAL;
+ }
rc = __ir_input_register(dev, ir_codes, props, driver_name);
if (rc < 0)
--
GitLab
From 4a702ebf61120906696f8366dd2be0653b1643e3 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:22 -0300
Subject: [PATCH 476/863] V4L/DVB: IR: add helper function for hardware with
small o/b buffer
Some ir input devices have small buffer, and interrupt the host
each time it is full (or half full)
Add a helper that automaticly handles timeouts, and also
automaticly merges samples of same time (space-space)
Such samples might be placed by hardware because size of
sample in the buffer is small (a byte for example).
Also remove constness from ir_dev_props, because it now contains timeout
settings that driver might want to change
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-core-priv.h | 1 +
drivers/media/IR/ir-keytable.c | 2 +-
drivers/media/IR/ir-raw-event.c | 84 +++++++++++++++++++++++++++++++++
include/media/ir-core.h | 23 +++++++--
4 files changed, 106 insertions(+), 4 deletions(-)
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index be6817261c8fe..8053e3b842726 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -41,6 +41,7 @@ struct ir_raw_event_ctrl {
/* raw decoder state follows */
struct ir_raw_event prev_ev;
+ struct ir_raw_event this_ev;
struct nec_dec {
int state;
unsigned count;
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 15a0f192d4134..411976d10f833 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -428,7 +428,7 @@ static void ir_close(struct input_dev *input_dev)
*/
int __ir_input_register(struct input_dev *input_dev,
const struct ir_scancode_table *rc_tab,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name)
{
struct ir_input_dev *ir_dev;
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index d0c18db4c0d37..43094e7eccfa9 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -139,6 +139,90 @@ int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type typ
}
EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
+/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev: the struct input_dev device descriptor
+ * @type: the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+
+ if (!raw || !ir->props)
+ return -EINVAL;
+
+ /* Ignore spaces in idle mode */
+ if (ir->idle && !ev->pulse)
+ return 0;
+ else if (ir->idle)
+ ir_raw_event_set_idle(input_dev, 0);
+
+ if (!raw->this_ev.duration) {
+ raw->this_ev = *ev;
+ } else if (ev->pulse == raw->this_ev.pulse) {
+ raw->this_ev.duration += ev->duration;
+ } else {
+ ir_raw_event_store(input_dev, &raw->this_ev);
+ raw->this_ev = *ev;
+ }
+
+ /* Enter idle mode if nessesary */
+ if (!ev->pulse && ir->props->timeout &&
+ raw->this_ev.duration >= ir->props->timeout)
+ ir_raw_event_set_idle(input_dev, 1);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+ ktime_t now;
+ u64 delta;
+
+ if (!ir->props)
+ return;
+
+ if (!ir->raw)
+ goto out;
+
+ if (idle) {
+ IR_dprintk(2, "enter idle mode\n");
+ raw->last_event = ktime_get();
+ } else {
+ IR_dprintk(2, "exit idle mode\n");
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+ WARN_ON(raw->this_ev.pulse);
+
+ raw->this_ev.duration =
+ min(raw->this_ev.duration + delta,
+ (u64)IR_MAX_DURATION);
+
+ ir_raw_event_store(input_dev, &raw->this_ev);
+
+ if (raw->this_ev.duration == IR_MAX_DURATION)
+ ir_raw_event_reset(input_dev);
+
+ raw->this_ev.duration = 0;
+ }
+out:
+ if (ir->props->s_idle)
+ ir->props->s_idle(ir->props->priv, idle);
+ ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
/**
* ir_raw_event_handle() - schedules the decoding of stored ir data
* @input_dev: the struct input_dev device descriptor
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 197d05aa83dc4..a781045aeed59 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -41,6 +41,9 @@ enum rc_driver_type {
* anything with it. Yet, as the same keycode table can be used with other
* devices, a mask is provided to allow its usage. Drivers should generally
* leave this field in blank
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
* @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
@@ -50,11 +53,19 @@ enum rc_driver_type {
* @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
* @s_tx_carrier: set transmit carrier frequency
* @tx_ir: transmit IR
+ * @s_idle: optional: enable/disable hardware idle mode, upon which,
+ * device doesn't interrupt host untill it sees IR data
*/
struct ir_dev_props {
enum rc_driver_type driver_type;
unsigned long allowed_protos;
u32 scanmask;
+
+ u32 timeout;
+ u32 min_timeout;
+ u32 max_timeout;
+
+
void *priv;
int (*change_protocol)(void *priv, u64 ir_type);
int (*open)(void *priv);
@@ -62,6 +73,7 @@ struct ir_dev_props {
int (*s_tx_mask)(void *priv, u32 mask);
int (*s_tx_carrier)(void *priv, u32 carrier);
int (*tx_ir)(void *priv, int *txbuf, u32 n);
+ void (*s_idle)(void *priv, int enable);
};
struct ir_input_dev {
@@ -69,9 +81,10 @@ struct ir_input_dev {
char *driver_name; /* Name of the driver module */
struct ir_scancode_table rc_tab; /* scan/key table */
unsigned long devno; /* device number */
- const struct ir_dev_props *props; /* Device properties */
+ struct ir_dev_props *props; /* Device properties */
struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */
struct input_dev *input_dev; /* the input device associated with this device */
+ bool idle;
/* key info - needed by IR keycode handlers */
spinlock_t keylock; /* protects the below members */
@@ -95,12 +108,12 @@ enum raw_event_type {
/* From ir-keytable.c */
int __ir_input_register(struct input_dev *dev,
const struct ir_scancode_table *ir_codes,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name);
static inline int ir_input_register(struct input_dev *dev,
const char *map_name,
- const struct ir_dev_props *props,
+ struct ir_dev_props *props,
const char *driver_name) {
struct ir_scancode_table *ir_codes;
struct ir_input_dev *ir_dev;
@@ -148,6 +161,10 @@ struct ir_raw_event {
void ir_raw_event_handle(struct input_dev *input_dev);
int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle);
+
static inline void ir_raw_event_reset(struct input_dev *input_dev)
{
struct ir_raw_event ev = { .pulse = false, .duration = 0 };
--
GitLab
From e589333f346b58f8da5bb8152e1219c52d375ccc Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:23 -0300
Subject: [PATCH 477/863] V4L/DVB: IR: extend interfaces to support more device
settings
LIRC: add new IOCTL that enables learning mode (wide band receiver)
Still missing features: carrier report & timeout reports.
Will need to pack these into ir_raw_event
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
.../DocBook/v4l/lirc_device_interface.xml | 16 +++
drivers/media/IR/ir-core-priv.h | 1 +
drivers/media/IR/ir-lirc-codec.c | 112 +++++++++++++++---
include/media/ir-core.h | 12 +-
include/media/lirc.h | 5 +-
5 files changed, 125 insertions(+), 21 deletions(-)
diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/v4l/lirc_device_interface.xml
index 0413234023d43..68134c0ab4d1b 100644
--- a/Documentation/DocBook/v4l/lirc_device_interface.xml
+++ b/Documentation/DocBook/v4l/lirc_device_interface.xml
@@ -229,6 +229,22 @@ on working with the default settings initially.</para>
and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_WIDEBAND_RECEIVER</term>
+ <listitem>
+ <para>Some receivers are equipped with special wide band receiver which is intended
+ to be used to learn output of existing remote.
+ Calling that ioctl with (1) will enable it, and with (0) disable it.
+ This might be useful of receivers that have otherwise narrow band receiver
+ that prevents them to be used with some remotes.
+ Wide band receiver might also be more precise
+ On the other hand its disadvantage it usually reduced range of reception.
+ Note: wide band receiver might be implictly enabled if you enable
+ carrier reports. In that case it will be disabled as soon as you disable
+ carrier reports. Trying to disable wide band receiver while carrier
+ reports are active will do nothing.</para>
+ </listitem>
+ </varlistentry>
</variablelist>
</section>
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index 8053e3b842726..a85a8c7c905a6 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -79,6 +79,7 @@ struct ir_raw_event_ctrl {
struct lirc_codec {
struct ir_input_dev *ir_dev;
struct lirc_driver *drv;
+ int carrier_low;
} lirc;
};
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
index 8ca01fd67139b..77b5946413c02 100644
--- a/drivers/media/IR/ir-lirc-codec.c
+++ b/drivers/media/IR/ir-lirc-codec.c
@@ -46,7 +46,6 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
TO_US(ev.duration), TO_STR(ev.pulse));
-
sample = ev.duration / 1000;
if (ev.pulse)
sample |= PULSE_BIT;
@@ -96,13 +95,14 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
return ret;
}
-static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
+ unsigned long __user arg)
{
struct lirc_codec *lirc;
struct ir_input_dev *ir_dev;
int ret = 0;
void *drv_data;
- unsigned long val;
+ unsigned long val = 0;
lirc = lirc_get_pdata(filep);
if (!lirc)
@@ -114,47 +114,106 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long ar
drv_data = ir_dev->props->priv;
- switch (cmd) {
- case LIRC_SET_TRANSMITTER_MASK:
+ if (_IOC_DIR(cmd) & _IOC_WRITE) {
ret = get_user(val, (unsigned long *)arg);
if (ret)
return ret;
+ }
+
+ switch (cmd) {
+
+ /* legacy support */
+ case LIRC_GET_SEND_MODE:
+ val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+ break;
+
+ case LIRC_SET_SEND_MODE:
+ if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+ return -EINVAL;
+ break;
- if (ir_dev->props && ir_dev->props->s_tx_mask)
+ /* TX settings */
+ case LIRC_SET_TRANSMITTER_MASK:
+ if (ir_dev->props->s_tx_mask)
ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
else
return -EINVAL;
break;
case LIRC_SET_SEND_CARRIER:
- ret = get_user(val, (unsigned long *)arg);
- if (ret)
- return ret;
-
- if (ir_dev->props && ir_dev->props->s_tx_carrier)
+ if (ir_dev->props->s_tx_carrier)
ir_dev->props->s_tx_carrier(drv_data, (u32)val);
else
return -EINVAL;
break;
- case LIRC_GET_SEND_MODE:
- val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
- ret = put_user(val, (unsigned long *)arg);
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ if (!ir_dev->props->s_tx_duty_cycle)
+ return -ENOSYS;
+
+ if (val <= 0 || val >= 100)
+ return -EINVAL;
+
+ ir_dev->props->s_tx_duty_cycle(ir_dev->props->priv, val);
break;
- case LIRC_SET_SEND_MODE:
- ret = get_user(val, (unsigned long *)arg);
- if (ret)
- return ret;
+ /* RX settings */
+ case LIRC_SET_REC_CARRIER:
+ if (ir_dev->props->s_rx_carrier_range)
+ ret = ir_dev->props->s_rx_carrier_range(
+ ir_dev->props->priv,
+ ir_dev->raw->lirc.carrier_low, val);
+ else
+ return -ENOSYS;
- if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+ if (!ret)
+ ir_dev->raw->lirc.carrier_low = 0;
+ break;
+
+ case LIRC_SET_REC_CARRIER_RANGE:
+ if (val >= 0)
+ ir_dev->raw->lirc.carrier_low = val;
+ break;
+
+
+ case LIRC_GET_REC_RESOLUTION:
+ val = ir_dev->props->rx_resolution;
+ break;
+
+ case LIRC_SET_WIDEBAND_RECEIVER:
+ if (ir_dev->props->s_learning_mode)
+ return ir_dev->props->s_learning_mode(
+ ir_dev->props->priv, !!val);
+ else
+ return -ENOSYS;
+
+ /* Generic timeout support */
+ case LIRC_GET_MIN_TIMEOUT:
+ if (!ir_dev->props->max_timeout)
+ return -ENOSYS;
+ val = ir_dev->props->min_timeout / 1000;
+ break;
+
+ case LIRC_GET_MAX_TIMEOUT:
+ if (!ir_dev->props->max_timeout)
+ return -ENOSYS;
+ val = ir_dev->props->max_timeout / 1000;
+ break;
+
+ case LIRC_SET_REC_TIMEOUT:
+ if (val < ir_dev->props->min_timeout ||
+ val > ir_dev->props->max_timeout)
return -EINVAL;
+ ir_dev->props->timeout = val * 1000;
break;
default:
return lirc_dev_fop_ioctl(filep, cmd, arg);
}
+ if (_IOC_DIR(cmd) & _IOC_READ)
+ ret = put_user(val, (unsigned long *)arg);
+
return ret;
}
@@ -200,13 +259,28 @@ static int ir_lirc_register(struct input_dev *input_dev)
features = LIRC_CAN_REC_MODE2;
if (ir_dev->props->tx_ir) {
+
features |= LIRC_CAN_SEND_PULSE;
if (ir_dev->props->s_tx_mask)
features |= LIRC_CAN_SET_TRANSMITTER_MASK;
if (ir_dev->props->s_tx_carrier)
features |= LIRC_CAN_SET_SEND_CARRIER;
+
+ if (ir_dev->props->s_tx_duty_cycle)
+ features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
}
+ if (ir_dev->props->s_rx_carrier_range)
+ features |= LIRC_CAN_SET_REC_CARRIER |
+ LIRC_CAN_SET_REC_CARRIER_RANGE;
+
+ if (ir_dev->props->s_learning_mode)
+ features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
+
+ if (ir_dev->props->max_timeout)
+ features |= LIRC_CAN_SET_REC_TIMEOUT;
+
+
snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
ir_dev->driver_name);
drv->minor = -1;
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index a781045aeed59..eb7fddf8f6075 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -44,6 +44,8 @@ enum rc_driver_type {
* @timeout: optional time after which device stops sending data
* @min_timeout: minimum timeout supported by device
* @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
* @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
@@ -52,9 +54,12 @@ enum rc_driver_type {
* is opened.
* @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
* @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
* @tx_ir: transmit IR
* @s_idle: optional: enable/disable hardware idle mode, upon which,
- * device doesn't interrupt host untill it sees IR data
+ device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
*/
struct ir_dev_props {
enum rc_driver_type driver_type;
@@ -65,6 +70,8 @@ struct ir_dev_props {
u32 min_timeout;
u32 max_timeout;
+ u32 rx_resolution;
+ u32 tx_resolution;
void *priv;
int (*change_protocol)(void *priv, u64 ir_type);
@@ -72,8 +79,11 @@ struct ir_dev_props {
void (*close)(void *priv);
int (*s_tx_mask)(void *priv, u32 mask);
int (*s_tx_carrier)(void *priv, u32 carrier);
+ int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
+ int (*s_rx_carrier_range)(void *priv, u32 min, u32 max);
int (*tx_ir)(void *priv, int *txbuf, u32 n);
void (*s_idle)(void *priv, int enable);
+ int (*s_learning_mode)(void *priv, int enable);
};
struct ir_input_dev {
diff --git a/include/media/lirc.h b/include/media/lirc.h
index 42c467c50519a..6678a169fd9e2 100644
--- a/include/media/lirc.h
+++ b/include/media/lirc.h
@@ -77,6 +77,7 @@
#define LIRC_CAN_SET_REC_FILTER 0x08000000
#define LIRC_CAN_MEASURE_CARRIER 0x02000000
+#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
@@ -145,7 +146,7 @@
* if enabled from the next key press on the driver will send
* LIRC_MODE2_FREQUENCY packets
*/
-#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
+#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
/*
* to set a range use
@@ -162,4 +163,6 @@
#define LIRC_SETUP_START _IO('i', 0x00000021)
#define LIRC_SETUP_END _IO('i', 0x00000022)
+#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
+
#endif
--
GitLab
From ed4d3876d18d95406e0258a6421b1f4eda51d629 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:24 -0300
Subject: [PATCH 478/863] V4L/DVB: IR: report unknown scancodes the in-kernel
decoders found
This way it is possible to use evtest to create keymap for unknown remote.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-keytable.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 411976d10f833..7032ea047f8a7 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -339,6 +339,8 @@ void ir_repeat(struct input_dev *dev)
spin_lock_irqsave(&ir->keylock, flags);
+ input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
if (!ir->keypressed)
goto out;
@@ -370,6 +372,8 @@ void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
spin_lock_irqsave(&ir->keylock, flags);
+ input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
/* Repeat event? */
if (ir->keypressed &&
ir->last_scancode == scancode &&
@@ -383,9 +387,11 @@ void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
ir->last_toggle = toggle;
ir->last_keycode = keycode;
+
if (keycode == KEY_RESERVED)
goto out;
+
/* Register a keypress */
ir->keypressed = true;
IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
@@ -480,6 +486,8 @@ int __ir_input_register(struct input_dev *input_dev,
set_bit(EV_KEY, input_dev->evbit);
set_bit(EV_REP, input_dev->evbit);
+ set_bit(EV_MSC, input_dev->evbit);
+ set_bit(MSC_SCAN, input_dev->mscbit);
if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
rc = -ENOMEM;
--
GitLab
From 9ea53b74df9c4681f5bb2da6b2e10e37d87ea6d6 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:25 -0300
Subject: [PATCH 479/863] V4L/DVB: STAGING: remove lirc_ene0100 driver
Add latest unported version of this driver to media/IR.
Next patch will port it to ir core.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ene_ir.c | 1176 +++++++++++++++++++++++++++
drivers/media/IR/ene_ir.h | 240 ++++++
drivers/staging/lirc/Kconfig | 8 -
drivers/staging/lirc/Makefile | 1 -
drivers/staging/lirc/lirc_ene0100.c | 646 ---------------
5 files changed, 1416 insertions(+), 655 deletions(-)
create mode 100644 drivers/media/IR/ene_ir.c
create mode 100644 drivers/media/IR/ene_ir.h
delete mode 100644 drivers/staging/lirc/lirc_ene0100.c
diff --git a/drivers/media/IR/ene_ir.c b/drivers/media/IR/ene_ir.c
new file mode 100644
index 0000000000000..9d11caf55b035
--- /dev/null
+++ b/drivers/media/IR/ene_ir.c
@@ -0,0 +1,1176 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include "lirc_ene0100.h"
+
+
+static int sample_period = -1;
+static int enable_idle = 1;
+static int enable_duty_carrier;
+static int input = 1;
+static int debug;
+static int txsim;
+
+static void ene_rx_set_idle(struct ene_device *dev, int idle);
+static int ene_irq_status(struct ene_device *dev);
+static void ene_send_sample(struct ene_device *dev, unsigned long sample);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+ u8 retval;
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ retval = inb(dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x == %02x", reg, retval);
+ return retval;
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ outb(value, dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x <- %02x", reg, value);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+ u16 reg, u8 value, u8 mask)
+{
+ u8 regvalue;
+
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+ regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+ regvalue |= (value & mask);
+ outb(regvalue, dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x <- %02x (mask=%02x)", reg, value, mask);
+}
+
+/* detect hardware features */
+static int ene_hw_detect(struct ene_device *dev)
+{
+ u8 chip_major, chip_minor;
+ u8 hw_revision, old_ver;
+ u8 tmp;
+ u8 fw_capabilities;
+
+ tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+ chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+ chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+ hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+ old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+ if (hw_revision == 0xFF) {
+
+ ene_printk(KERN_WARNING, "device seems to be disabled\n");
+ ene_printk(KERN_WARNING,
+ "send a mail to lirc-list@lists.sourceforge.net\n");
+ ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x33) {
+ ene_printk(KERN_WARNING, "chips 0x33xx aren't supported\n");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_C;
+ } else if (old_ver == 0x24 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_B;
+ ene_printk(KERN_NOTICE, "KB3926B detected\n");
+ } else {
+ dev->hw_revision = ENE_HW_D;
+ ene_printk(KERN_WARNING,
+ "unknown ENE chip detected, assuming KB3926D\n");
+ ene_printk(KERN_WARNING,
+ "driver support might be not complete");
+
+ }
+
+ ene_printk(KERN_DEBUG,
+ "chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
+ chip_major, chip_minor, old_ver, hw_revision);
+
+ /* detect features hardware supports */
+ if (dev->hw_revision < ENE_HW_C)
+ return 0;
+
+ fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+ ene_dbg("Firmware capabilities: %02x", fw_capabilities);
+
+ dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+ dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+ dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+ (fw_capabilities & ENE_FW2_FAN_AS_NRML_IN);
+
+ ene_printk(KERN_NOTICE, "hardware features:\n");
+ ene_printk(KERN_NOTICE,
+ "learning and transmit %s, gpio40_learn %s, fan_in %s\n",
+ dev->hw_learning_and_tx_capable ? "on" : "off",
+ dev->hw_gpio40_learning ? "on" : "off",
+ dev->hw_fan_as_normal_input ? "on" : "off");
+
+ if (dev->hw_learning_and_tx_capable) {
+ ene_printk(KERN_WARNING,
+ "Device supports transmitting, but that support is\n");
+ ene_printk(KERN_WARNING,
+ "lightly tested. Please test it and mail\n");
+ ene_printk(KERN_WARNING,
+ "lirc-list@lists.sourceforge.net\n");
+ }
+ return 0;
+}
+
+/* this enables/disables IR input via gpio40*/
+static void ene_enable_gpio40_recieve(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ?
+ 0 : ENE_CIR_CONF2_GPIO40DIS,
+ ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables/disables IR via standard input */
+static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0);
+}
+
+/* this enables/disables IR input via unused fan tachtometer input */
+static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
+{
+ if (!enable)
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+ else {
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+ }
+ dev->rx_fan_input_inuse = enable;
+}
+
+
+/* Sense current recieved carrier */
+static int ene_rx_sense_carrier(struct ene_device *dev)
+{
+ int period = ene_hw_read_reg(dev, ENE_RX_CARRIER);
+ int carrier;
+ ene_dbg("RX: hardware carrier period = %02x", period);
+
+ if (!(period & ENE_RX_CARRIER_VALID))
+ return 0;
+
+ period &= ~ENE_RX_CARRIER_VALID;
+
+ if (!period)
+ return 0;
+
+ carrier = 2000000 / period;
+ ene_dbg("RX: sensed carrier = %d Hz", carrier);
+ return carrier;
+}
+
+/* determine which input to use*/
+static void ene_rx_set_inputs(struct ene_device *dev)
+{
+ int learning_mode = dev->learning_enabled || dev->rx_carrier_sense;
+
+ ene_dbg("RX: setup reciever, learning mode = %d", learning_mode);
+
+ ene_enable_normal_recieve(dev, 1);
+
+ /* old hardware doesn't support learning mode for sure */
+ if (dev->hw_revision <= ENE_HW_B)
+ return;
+
+ /* reciever not learning capable, still set gpio40 correctly */
+ if (!dev->hw_learning_and_tx_capable) {
+ ene_enable_gpio40_recieve(dev, !dev->hw_gpio40_learning);
+ return;
+ }
+
+ /* enable learning mode */
+ if (learning_mode) {
+ ene_enable_gpio40_recieve(dev, dev->hw_gpio40_learning);
+
+ /* fan input is not used for learning */
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_recieve(dev, 0);
+
+ /* disable learning mode */
+ } else {
+ if (dev->hw_fan_as_normal_input) {
+ ene_enable_fan_recieve(dev, 1);
+ ene_enable_normal_recieve(dev, 0);
+ } else
+ ene_enable_gpio40_recieve(dev,
+ !dev->hw_gpio40_learning);
+ }
+
+ /* set few additional settings for this mode */
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_mode ?
+ ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ?
+ ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+}
+
+/* Enable the device for receive */
+static void ene_rx_enable(struct ene_device *dev)
+{
+ u8 reg_value;
+
+ if (dev->hw_revision < ENE_HW_C) {
+ ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+ ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+ } else {
+ reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+ reg_value |= ENEC_IRQ_UNK_EN;
+ reg_value &= ~ENEC_IRQ_STATUS;
+ reg_value |= (dev->irq & ENEC_IRQ_MASK);
+ ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+ ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+ }
+
+ ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+ ene_rx_set_inputs(dev);
+
+ /* set sampling period */
+ ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+ /* ack any pending irqs - just in case */
+ ene_irq_status(dev);
+
+ /* enter idle mode */
+ ene_rx_set_idle(dev, 1);
+
+ /* enable firmware bits */
+ ene_hw_write_reg_mask(dev, ENE_FW1,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ);
+}
+
+/* Disable the device reciever */
+static void ene_rx_disable(struct ene_device *dev)
+{
+ /* disable inputs */
+ ene_enable_normal_recieve(dev, 0);
+
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_recieve(dev, 0);
+
+ /* disable hardware IRQ and firmware flag */
+ ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ ene_rx_set_idle(dev, 1);
+}
+
+/* send current sample to the user */
+static void ene_rx_flush(struct ene_device *dev, int timeout)
+{
+ unsigned long value;
+
+ value = dev->rx_sample_pulse ? LIRC_PULSE(dev->rx_sample) :
+ LIRC_SPACE(dev->rx_sample);
+ ene_send_sample(dev, value);
+ dev->rx_sample = 0;
+ dev->rx_sample_pulse = 0;
+}
+
+/* recieve new sample and process it */
+static void ene_rx_sample(struct ene_device *dev, int sample, int is_pulse)
+{
+ ene_dbg("RX: sample %8d (%s)", sample, is_pulse ? "pulse" : "space");
+
+ /* ignore spaces in idle mode, can get them on revC */
+ /* also ignore a space in front of first pulse */
+ if (dev->rx_idle && !is_pulse)
+ return;
+
+ /* get out of idle mode now */
+ if (dev->rx_idle)
+ ene_rx_set_idle(dev, 0);
+
+ if (!dev->rx_sample) {
+ dev->rx_sample = sample;
+ dev->rx_sample_pulse = is_pulse;
+ } else if (is_pulse == dev->rx_sample_pulse)
+ dev->rx_sample += sample;
+ else {
+ ene_rx_flush(dev, 0);
+ dev->rx_sample = sample;
+ dev->rx_sample_pulse = is_pulse;
+ }
+
+ if (is_pulse)
+ return;
+
+ /* overflow sample from fan input recieved, enable idle mode */
+ if (dev->rx_fan_input_inuse &&
+ sample == ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN) {
+ ene_rx_set_idle(dev, 1);
+ return;
+ }
+
+ if (!dev->rx_fan_input_inuse) {
+ /* Report timeout if enabled */
+ if (dev->rx_timeout && dev->rx_send_timeout_packet &&
+ !dev->rx_timeout_sent &&
+ dev->rx_sample > dev->rx_timeout) {
+ ene_dbg("RX: sending timeout sample");
+ ene_send_sample(dev, LIRC_TIMEOUT(dev->rx_sample));
+ dev->rx_timeout_sent = 1;
+ }
+
+ /* too large sample accumulated via normal input.
+ note that on revC, hardware idle mode turns on automaticly,
+ so max gap should be less that the gap after which
+ hw stops sending samples */
+ if (dev->rx_sample > ENE_MAXGAP) {
+ ene_rx_set_idle(dev, 1);
+ return;
+ }
+ }
+}
+
+/* enable or disable idle mode */
+static void ene_rx_set_idle(struct ene_device *dev, int idle)
+{
+ struct timeval now;
+ int disable_sampler = 0;
+
+
+ /* Also put hardware sampler in 'idle' mode on revB*/
+ /* revC and higher do that automaticly (firmware does?) */
+ if ((dev->hw_revision < ENE_HW_C) && enable_idle)
+ if (idle)
+ disable_sampler = 1;
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+ disable_sampler ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+ ENE_CIR_SAMPLE_OVERFLOW);
+ dev->rx_idle = idle;
+
+ /* remember when we have entered the idle mode */
+ if (idle) {
+ ene_dbg("RX: going into idle mode");
+ do_gettimeofday(&dev->rx_gap_start);
+ return;
+ }
+
+ ene_dbg("RX: back from idle mode");
+
+ /* send the gap between keypresses now */
+ do_gettimeofday(&now);
+
+ if (dev->rx_sample_pulse) {
+ ene_dbg("RX: somehow we recieved a pulse before idle mode???");
+ return;
+ }
+
+ /* manually calculate and recieve the gap between keypresses */
+ if (now.tv_sec - dev->rx_gap_start.tv_sec > 16)
+ dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
+ else
+ dev->rx_sample +=
+ 1000000ull * (now.tv_sec - dev->rx_gap_start.tv_sec)
+ + now.tv_usec - dev->rx_gap_start.tv_usec;
+
+ if (dev->rx_sample > LIRC_SPACE(LIRC_VALUE_MASK))
+ dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
+
+ ene_rx_flush(dev, 0);
+ dev->rx_timeout_sent = 0;
+}
+
+/* prepare transmission */
+static void ene_tx_prepare(struct ene_device *dev)
+{
+ u8 conf1;
+
+ conf1 = ene_hw_read_reg(dev, ENE_CIR_CONF1);
+ dev->saved_conf1 = conf1;
+
+ if (dev->hw_revision == ENE_HW_C)
+ conf1 &= ~ENE_CIR_CONF1_TX_CLEAR;
+
+ /* Enable TX engine */
+ conf1 |= ENE_CIR_CONF1_TX_ON;
+
+ /* Set carrier */
+ if (dev->tx_period) {
+
+ int tx_period_in500ns = dev->tx_period * 2;
+
+ int tx_pulse_width_in_500ns =
+ tx_period_in500ns / (100 / dev->tx_duty_cycle);
+
+ if (!tx_pulse_width_in_500ns)
+ tx_pulse_width_in_500ns = 1;
+
+ ene_dbg("TX: pulse distance = %d * 500 ns", tx_period_in500ns);
+ ene_dbg("TX: pulse width = %d * 500 ns",
+ tx_pulse_width_in_500ns);
+
+ ene_hw_write_reg(dev, ENE_TX_PERIOD, ENE_TX_PERIOD_UNKBIT |
+ tx_period_in500ns);
+
+ ene_hw_write_reg(dev, ENE_TX_PERIOD_PULSE,
+ tx_pulse_width_in_500ns);
+
+ conf1 |= ENE_CIR_CONF1_TX_CARR;
+ } else
+ conf1 &= ~ENE_CIR_CONF1_TX_CARR;
+
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1);
+ dev->tx_underway = 1;
+
+}
+
+/* end transmission */
+static void ene_tx_complete(struct ene_device *dev)
+{
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1);
+ dev->tx_underway = 0;
+}
+
+/* set transmit mask */
+static void ene_tx_set_transmiter_mask(struct ene_device *dev)
+{
+ u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN;
+ u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN;
+
+ if (dev->transmitter_mask & 0x01)
+ txport1 |= ENE_TX_PORT1_EN;
+
+ if (dev->transmitter_mask & 0x02)
+ txport2 |= ENE_TX_PORT2_EN;
+
+ ene_hw_write_reg(dev, ENE_TX_PORT1, txport1);
+ ene_hw_write_reg(dev, ENE_TX_PORT2, txport2);
+}
+
+/* TX one sample - must be called with dev->hw_lock*/
+static void ene_tx_sample(struct ene_device *dev)
+{
+ u8 raw_tx;
+ u32 sample;
+
+ if (!dev->tx_underway) {
+ ene_dbg("TX: attempt to transmit while hw isn't setup");
+ return;
+ }
+
+ /* Grab next TX sample */
+ if (!dev->tx_sample) {
+again:
+ if (dev->tx_pos == dev->tx_len + 1) {
+ if (!dev->tx_done) {
+ ene_dbg("TX: no more data to send");
+ dev->tx_done = 1;
+ goto exit;
+ } else {
+ ene_dbg("TX: last sample sent by hardware");
+ ene_tx_complete(dev);
+ complete(&dev->tx_complete);
+ return;
+ }
+ }
+
+ sample = dev->tx_buffer[dev->tx_pos++];
+ dev->tx_sample_pulse = !dev->tx_sample_pulse;
+
+ ene_dbg("TX: sample %8d (%s)", sample, dev->tx_sample_pulse ?
+ "pulse" : "space");
+
+ dev->tx_sample = DIV_ROUND_CLOSEST(sample, ENE_TX_SMPL_PERIOD);
+
+ /* guard against too short samples */
+ if (!dev->tx_sample)
+ goto again;
+ }
+
+ raw_tx = min(dev->tx_sample , (unsigned int)ENE_TX_SMLP_MASK);
+ dev->tx_sample -= raw_tx;
+
+ if (dev->tx_sample_pulse)
+ raw_tx |= ENE_TX_PULSE_MASK;
+
+ ene_hw_write_reg(dev, ENE_TX_INPUT1 + dev->tx_reg, raw_tx);
+ dev->tx_reg = !dev->tx_reg;
+exit:
+ /* simulate TX done interrupt */
+ if (txsim)
+ mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
+}
+
+/* timer to simulate tx done interrupt */
+static void ene_tx_irqsim(unsigned long data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_tx_sample(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+
+/* read irq status and ack it */
+static int ene_irq_status(struct ene_device *dev)
+{
+ u8 irq_status;
+ u8 fw_flags1, fw_flags2;
+ int cur_rx_pointer;
+ int retval = 0;
+
+ fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+ cur_rx_pointer = !!(fw_flags2 & ENE_FW2_BUF_HIGH);
+
+ if (dev->hw_revision < ENE_HW_C) {
+ irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+ if (!(irq_status & ENEB_IRQ_STATUS_IR))
+ return 0;
+
+ ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+ irq_status & ~ENEB_IRQ_STATUS_IR);
+ dev->rx_pointer = cur_rx_pointer;
+ return ENE_IRQ_RX;
+ }
+
+ irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+ if (!(irq_status & ENEC_IRQ_STATUS))
+ return 0;
+
+ /* original driver does that twice - a workaround ? */
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+ /* clear unknown flag in F8F9 */
+ if (fw_flags2 & ENE_FW2_IRQ_CLR)
+ ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+ /* check if this is a TX interrupt */
+ fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+ if (fw_flags1 & ENE_FW1_TXIRQ) {
+ ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+ retval |= ENE_IRQ_TX;
+ }
+
+ /* Check if this is RX interrupt */
+ if (dev->rx_pointer != cur_rx_pointer) {
+ retval |= ENE_IRQ_RX;
+ dev->rx_pointer = cur_rx_pointer;
+
+ } else if (!(retval & ENE_IRQ_TX)) {
+ ene_dbg("RX: interrupt without change in RX pointer(%d)",
+ dev->rx_pointer);
+ retval |= ENE_IRQ_RX;
+ }
+
+ if ((retval & ENE_IRQ_RX) && (retval & ENE_IRQ_TX))
+ ene_dbg("both RX and TX interrupt at same time");
+
+ return retval;
+}
+
+/* interrupt handler */
+static irqreturn_t ene_isr(int irq, void *data)
+{
+ u16 hw_value;
+ int i, hw_sample;
+ int pulse;
+ int irq_status;
+ unsigned long flags;
+ int carrier = 0;
+ irqreturn_t retval = IRQ_NONE;
+ struct ene_device *dev = (struct ene_device *)data;
+
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ irq_status = ene_irq_status(dev);
+
+ if (!irq_status)
+ goto unlock;
+
+ retval = IRQ_HANDLED;
+
+ if (irq_status & ENE_IRQ_TX) {
+
+ if (!dev->hw_learning_and_tx_capable) {
+ ene_dbg("TX interrupt on unsupported device!");
+ goto unlock;
+ }
+ ene_tx_sample(dev);
+ }
+
+ if (!(irq_status & ENE_IRQ_RX))
+ goto unlock;
+
+
+ if ((debug && dev->learning_enabled) || dev->rx_carrier_sense)
+ carrier = ene_rx_sense_carrier(dev);
+
+ if (dev->rx_carrier_sense && carrier)
+ ene_send_sample(dev, LIRC_FREQUENCY(carrier));
+
+
+ for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+ hw_value = ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER + dev->rx_pointer * 4 + i);
+
+ if (dev->rx_fan_input_inuse) {
+ /* read high part of the sample */
+ hw_value |= ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER_FAN +
+ dev->rx_pointer * 4 + i) << 8;
+ pulse = hw_value & ENE_FAN_SMPL_PULS_MSK;
+
+ /* clear space bit, and other unused bits */
+ hw_value &= ENE_FAN_VALUE_MASK;
+ hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+ } else {
+ pulse = !(hw_value & ENE_SAMPLE_SPC_MASK);
+ hw_value &= ENE_SAMPLE_VALUE_MASK;
+ hw_sample = hw_value * sample_period;
+ }
+ /* no more data */
+ if (!(hw_value))
+ break;
+
+ ene_rx_sample(dev, hw_sample, pulse);
+ }
+unlock:
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return retval;
+}
+
+/* Initialize default settings */
+static void ene_setup_settings(struct ene_device *dev)
+{
+ dev->rx_send_timeout_packet = 0;
+ dev->rx_timeout = ENE_MAXGAP;
+ dev->tx_period = 32;
+ dev->tx_duty_cycle = 25; /*%*/
+ dev->transmitter_mask = 3;
+
+ /* Force learning mode if (input == 2), otherwise
+ let user set it with LIRC_SET_REC_CARRIER */
+ dev->learning_enabled =
+ (input == 2 && dev->hw_learning_and_tx_capable);
+
+ /* Clear accumulated sample bufer */
+ dev->rx_sample = 0;
+ dev->rx_sample_pulse = 0;
+ dev->rx_pointer = -1;
+ dev->rx_carrier_sense = 0;
+
+}
+
+/* outside interface: called on first open*/
+static int ene_open(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->in_use = 1;
+ ene_setup_settings(dev);
+ ene_rx_enable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+/* outside interface: called on device close*/
+static void ene_close(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_rx_disable(dev);
+ dev->in_use = 0;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* outside interface for settings */
+static int ene_ioctl(struct inode *node, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int lvalue = 0, retval, tmp;
+ unsigned long flags;
+ struct ene_device *dev = lirc_get_pdata(file);
+
+
+ switch (cmd) {
+ case LIRC_SET_SEND_CARRIER:
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ case LIRC_SET_TRANSMITTER_MASK:
+ case LIRC_SET_MEASURE_CARRIER_MODE:
+ case LIRC_SET_REC_CARRIER:
+ /* All these aren't possible without this */
+ if (!dev->hw_learning_and_tx_capable)
+ return -ENOSYS;
+ /* Fall through */
+ case LIRC_SET_REC_TIMEOUT:
+ case LIRC_SET_REC_TIMEOUT_REPORTS:
+ retval = get_user(lvalue, (unsigned int *) arg);
+ if (retval)
+ return retval;
+ }
+
+ switch (cmd) {
+ case LIRC_SET_SEND_CARRIER:
+ ene_dbg("TX: attempt to set tx carrier to %d kHz", lvalue);
+ tmp = 1000000 / lvalue; /* (1 / freq) (* # usec in 1 sec) */
+
+ if (tmp && (tmp > ENE_TX_PERIOD_MAX ||
+ tmp < ENE_TX_PERIOD_MIN)) {
+
+ ene_dbg("TX: out of range %d-%d carrier, "
+ "falling back to 32 kHz",
+ 1000 / ENE_TX_PERIOD_MIN,
+ 1000 / ENE_TX_PERIOD_MAX);
+
+ tmp = 32; /* this is just a coincidence!!! */
+ }
+ ene_dbg("TX: set carrier to %d kHz", lvalue);
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->tx_period = tmp;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ break;
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ ene_dbg("TX: attempt to set duty cycle to %d%%", lvalue);
+
+ if ((lvalue >= 100) || (lvalue <= 0)) {
+ retval = -EINVAL;
+ break;
+ }
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->tx_duty_cycle = lvalue;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ break;
+ case LIRC_SET_TRANSMITTER_MASK:
+ ene_dbg("TX: attempt to set transmitter mask %02x", lvalue);
+
+ /* invalid txmask */
+ if (!lvalue || lvalue & ~0x3) {
+ ene_dbg("TX: invalid mask");
+ /* this supposed to return num of transmitters */
+ retval = 2;
+ break;
+ }
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->transmitter_mask = lvalue;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ break;
+ case LIRC_SET_REC_CARRIER:
+ tmp = (lvalue > ENE_NORMAL_RX_HI || lvalue < ENE_NORMAL_RX_LOW);
+
+ if (tmp != dev->learning_enabled) {
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->learning_enabled = tmp;
+ ene_rx_set_inputs(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ }
+ break;
+ case LIRC_SET_REC_TIMEOUT:
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->rx_timeout = lvalue;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ ene_dbg("RX: set rx report timeout to %d", dev->rx_timeout);
+ break;
+ case LIRC_SET_REC_TIMEOUT_REPORTS:
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->rx_send_timeout_packet = lvalue;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ ene_dbg("RX: %sable timeout reports",
+ dev->rx_send_timeout_packet ? "en" : "dis");
+ break;
+ case LIRC_SET_MEASURE_CARRIER_MODE:
+ if (dev->rx_carrier_sense == lvalue)
+ break;
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->rx_carrier_sense = lvalue;
+ ene_rx_set_inputs(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ break;
+ case LIRC_GET_REC_RESOLUTION:
+ tmp = dev->rx_fan_input_inuse ?
+ ENE_SAMPLE_PERIOD_FAN : sample_period;
+ retval = put_user(tmp, (unsigned long *) arg);
+ break;
+ default:
+ retval = -ENOIOCTLCMD;
+ break;
+ }
+
+ return retval;
+}
+
+/* outside interface: transmit */
+static ssize_t ene_transmit(struct file *file, const char *buf,
+ size_t n, loff_t *ppos)
+{
+ struct ene_device *dev = lirc_get_pdata(file);
+ unsigned long flags;
+
+ if (!dev)
+ return -EFAULT;
+
+ if (!dev->hw_learning_and_tx_capable)
+ return -ENODEV;
+
+ if (n % sizeof(int))
+ return -EINVAL;
+
+ if (n > ENE_TXBUF_SIZE * sizeof(int))
+ return -ENOMEM;
+
+ if (copy_from_user(dev->tx_buffer, buf, n))
+ return -EFAULT;
+
+ dev->tx_len = n / sizeof(int);
+ dev->tx_pos = 0;
+ dev->tx_reg = 0;
+ dev->tx_done = 0;
+ dev->tx_sample = 0;
+ dev->tx_sample_pulse = 0;
+
+ ene_dbg("TX: %d samples", dev->tx_len);
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_tx_set_transmiter_mask(dev);
+ ene_tx_prepare(dev);
+
+ /* Transmit first two samples */
+ ene_tx_sample(dev);
+ ene_tx_sample(dev);
+
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+ if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
+ ene_dbg("TX: timeout");
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_tx_complete(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ } else
+ ene_dbg("TX: done");
+
+ return n;
+}
+
+/* Sends one sample to the user */
+static void ene_send_sample(struct ene_device *dev, unsigned long sample)
+{
+ if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
+ lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&sample);
+ wake_up(&dev->lirc_driver->rbuf->wait_poll);
+ }
+}
+
+
+static const struct file_operations ene_fops = {
+ .owner = THIS_MODULE,
+ .write = ene_transmit,
+ .ioctl = ene_ioctl,
+};
+
+/* main load function */
+static int ene_probe(struct pnp_dev *pnp_dev,
+ const struct pnp_device_id *dev_id)
+{
+ struct ene_device *dev;
+ struct lirc_driver *lirc_driver;
+ int error = -ENOMEM;
+
+ dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+ if (!dev)
+ goto err1;
+
+ dev->pnp_dev = pnp_dev;
+ pnp_set_drvdata(pnp_dev, dev);
+
+ /* prepare lirc interface */
+ error = -ENOMEM;
+ lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+
+ if (!lirc_driver)
+ goto err2;
+
+ dev->lirc_driver = lirc_driver;
+
+ strcpy(lirc_driver->name, ENE_DRIVER_NAME);
+ lirc_driver->minor = -1;
+ lirc_driver->code_length = sizeof(int) * 8;
+ lirc_driver->features = LIRC_CAN_REC_MODE2 |
+ LIRC_CAN_GET_REC_RESOLUTION |
+ LIRC_CAN_SET_REC_TIMEOUT;
+ lirc_driver->data = dev;
+ lirc_driver->set_use_inc = ene_open;
+ lirc_driver->set_use_dec = ene_close;
+ lirc_driver->dev = &pnp_dev->dev;
+ lirc_driver->owner = THIS_MODULE;
+ lirc_driver->fops = &ene_fops;
+ lirc_driver->min_timeout = ENE_MINGAP;
+ lirc_driver->max_timeout = ENE_MAXGAP;
+ lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+
+ if (!lirc_driver->rbuf)
+ goto err3;
+
+ if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 512))
+ goto err4;
+
+ /* validate resources */
+ if (!pnp_port_valid(pnp_dev, 0) ||
+ pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+ goto err5;
+
+ if (!pnp_irq_valid(pnp_dev, 0))
+ goto err5;
+
+ dev->hw_io = pnp_port_start(pnp_dev, 0);
+ dev->irq = pnp_irq(pnp_dev, 0);
+ spin_lock_init(&dev->hw_lock);
+
+ /* claim the resources */
+ error = -EBUSY;
+ if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+ goto err5;
+
+ if (request_irq(dev->irq, ene_isr,
+ IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+ goto err6;
+
+ /* detect hardware version and features */
+ error = ene_hw_detect(dev);
+ if (error)
+ goto err7;
+
+ ene_setup_settings(dev);
+
+ if (!dev->hw_learning_and_tx_capable && txsim) {
+ dev->hw_learning_and_tx_capable = 1;
+ setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
+ (long unsigned int)dev);
+ ene_printk(KERN_WARNING,
+ "Simulation of TX activated\n");
+ }
+
+ if (dev->hw_learning_and_tx_capable) {
+ lirc_driver->features |= LIRC_CAN_SEND_PULSE |
+ LIRC_CAN_SET_SEND_CARRIER |
+ LIRC_CAN_SET_TRANSMITTER_MASK;
+
+ if (enable_duty_carrier)
+ lirc_driver->features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
+
+ if (input == 0)
+ lirc_driver->features |= LIRC_CAN_SET_REC_CARRIER;
+
+ init_completion(&dev->tx_complete);
+ }
+
+ /* don't allow too short/long sample periods */
+ if (sample_period < 5 || sample_period > 0x7F)
+ sample_period = -1;
+
+ /* choose default sample period */
+ if (sample_period == -1) {
+
+ sample_period = 50;
+
+ /* on revB, hardware idle mode eats first sample
+ if we set too low sample period */
+ if (dev->hw_revision == ENE_HW_B && enable_idle)
+ sample_period = 75;
+ }
+
+ device_set_wakeup_capable(&pnp_dev->dev, 1);
+ device_set_wakeup_enable(&pnp_dev->dev, 1);
+
+ error = -ENODEV;
+ if (lirc_register_driver(lirc_driver))
+ goto err7;
+
+ ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+ return 0;
+
+err7:
+ free_irq(dev->irq, dev);
+err6:
+ release_region(dev->hw_io, ENE_MAX_IO);
+err5:
+ lirc_buffer_free(lirc_driver->rbuf);
+err4:
+ kfree(lirc_driver->rbuf);
+err3:
+ kfree(lirc_driver);
+err2:
+ kfree(dev);
+err1:
+ return error;
+}
+
+/* main unload function */
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_rx_disable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+ free_irq(dev->irq, dev);
+ release_region(dev->hw_io, ENE_MAX_IO);
+ lirc_unregister_driver(dev->lirc_driver->minor);
+ lirc_buffer_free(dev->lirc_driver->rbuf);
+ kfree(dev->lirc_driver);
+ kfree(dev);
+}
+
+/* enable wake on IR (wakes on specific button on original remote) */
+static void ene_enable_wake(struct ene_device *dev, int enable)
+{
+ enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
+
+ ene_dbg("wake on IR %s", enable ? "enabled" : "disabled");
+
+ ene_hw_write_reg_mask(dev, ENE_FW1, enable ?
+ ENE_FW1_WAKE : 0, ENE_FW1_WAKE);
+}
+
+#ifdef CONFIG_PM
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_enable_wake(dev, 1);
+ return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ if (dev->in_use)
+ ene_rx_enable(dev);
+
+ ene_enable_wake(dev, 0);
+ return 0;
+}
+#endif
+
+static void ene_shutdown(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_enable_wake(dev, 1);
+}
+
+static const struct pnp_device_id ene_ids[] = {
+ {.id = "ENE0100",},
+ {.id = "ENE0200",},
+ {.id = "ENE0201",},
+ {},
+};
+
+static struct pnp_driver ene_driver = {
+ .name = ENE_DRIVER_NAME,
+ .id_table = ene_ids,
+ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+ .probe = ene_probe,
+ .remove = __devexit_p(ene_remove),
+#ifdef CONFIG_PM
+ .suspend = ene_suspend,
+ .resume = ene_resume,
+#endif
+ .shutdown = ene_shutdown,
+};
+
+static int __init ene_init(void)
+{
+ return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+ pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+ "Enables turning off signal sampling after long inactivity time; "
+ "if disabled might help detecting input signal (default: enabled)"
+ " (KB3926B only)");
+
+module_param(input, bool, S_IRUGO);
+MODULE_PARM_DESC(input, "select which input to use "
+ "0 - auto, 1 - standard, 2 - wideband(KB3926C+)");
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debug (debug=2 verbose debug output)");
+
+module_param(txsim, bool, S_IRUGO);
+MODULE_PARM_DESC(txsim,
+ "Simulate TX features on unsupported hardware (dangerous)");
+
+module_param(enable_duty_carrier, bool, S_IRUGO);
+MODULE_PARM_DESC(enable_duty_carrier,
+ "Enable a code that might allow to to set TX carrier duty cycle");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+ ("LIRC driver for KB3926B/KB3926C/KB3926D "
+ "(aka ENE0100/ENE0200/ENE0201) CIR port");
+
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/IR/ene_ir.h
new file mode 100644
index 0000000000000..b464a680d8ae1
--- /dev/null
+++ b/drivers/media/IR/ene_ir.h
@@ -0,0 +1,240 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+/* hardware address */
+#define ENE_STATUS 0 /* hardware status - unused */
+#define ENE_ADDR_HI 1 /* hi byte of register address */
+#define ENE_ADDR_LO 2 /* low byte of register address */
+#define ENE_IO 3 /* read/write window */
+#define ENE_MAX_IO 4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK 0x80 /* sample is space */
+#define ENE_SAMPLE_VALUE_MASK 0x7F
+#define ENE_SAMPLE_OVERFLOW 0x7F
+#define ENE_SAMPLES_SIZE 4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */
+ /* each sample of normal buffer */
+#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */
+ /* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1 0xF8F8
+#define ENE_FW1_ENABLE 0x01 /* enable fw processing */
+#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
+#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */
+#define ENE_FW1_IRQ 0x80 /* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2 0xF8F9
+#define ENE_FW2_BUF_HIGH 0x01 /* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR 0x04 /* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN 0x08 /* normal input is used as */
+ /* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN 0x40 /* fan is used as normal input */
+#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */
+
+/* transmitter ports */
+#define ENE_TX_PORT2 0xFC01 /* this enables one or both */
+#define ENE_TX_PORT2_EN 0x20 /* TX ports */
+#define ENE_TX_PORT1 0xFC08
+#define ENE_TX_PORT1_EN 0x02
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ 0xFD09 /* IRQ number */
+#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
+#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN 0xCD
+#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN 0x03
+#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ 0xFE9B /* new irq settings register */
+#define ENEC_IRQ_MASK 0x0F /* irq number mask */
+#define ENEC_IRQ_UNK_EN 0x10 /* always enabled */
+#define ENEC_IRQ_STATUS 0x20 /* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1 0xFEC0
+#define ENE_CIR_CONF1_TX_CLEAR 0x01 /* clear that on revC */
+ /* while transmitting */
+#define ENE_CIR_CONF1_RX_ON 0x07 /* normal reciever enabled */
+#define ENE_CIR_CONF1_LEARN1 0x08 /* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR 0x80 /* send TX carrier or not */
+
+#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2 0x10 /* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS 0x20 /* disable input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW 0x80 /* interrupt on overflows if set */
+
+
+/* Two byte tx buffer */
+#define ENE_TX_INPUT1 0xFEC9
+#define ENE_TX_INPUT2 0xFECA
+#define ENE_TX_PULSE_MASK 0x80 /* Transmitted sample is pulse */
+#define ENE_TX_SMLP_MASK 0x7F
+#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period - fixed */
+
+
+/* Unknown TX setting - TX sample period ??? */
+#define ENE_TX_UNK1 0xFECB /* set to 0x63 */
+
+/* Current recieved carrier period */
+#define ENE_RX_CARRIER 0xFECC /* RX period (500 ns) */
+#define ENE_RX_CARRIER_VALID 0x80 /* Register content valid */
+
+
+/* TX period (1/carrier) */
+#define ENE_TX_PERIOD 0xFECE /* TX period (500 ns) */
+#define ENE_TX_PERIOD_UNKBIT 0x80 /* This bit set on transmit*/
+#define ENE_TX_PERIOD_PULSE 0xFECF /* TX pulse period (500 ns)*/
+
+/* Hardware versions */
+#define ENE_HW_VERSION 0xFF00 /* hardware revision */
+#define ENE_HW_UNK 0xFF1D
+#define ENE_HW_UNK_CLR 0x04
+#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */
+#define ENE_HW_VER_MINOR 0xFF1F
+#define ENE_HW_VER_OLD 0xFD00
+
+/* Normal/Learning carrier ranges - only valid if we have learning input*/
+/* TODO: test */
+#define ENE_NORMAL_RX_LOW 34
+#define ENE_NORMAL_RX_HI 38
+
+/* Tx carrier range */
+/* Hardware might be able to do more, but this range is enough for
+ all purposes */
+#define ENE_TX_PERIOD_MAX 32 /* corresponds to 29.4 kHz */
+#define ENE_TX_PERIOD_MIN 16 /* corrsponds to 62.5 kHz */
+
+
+
+/* Minimal and maximal gaps */
+
+/* Normal case:
+ Minimal gap is 0x7F * sample period
+ Maximum gap depends on hardware.
+ For KB3926B, it is unlimited, for newer models its around
+ 250000, after which HW stops sending samples, and that is
+ not possible to change */
+
+/* Fan case:
+ Both minimal and maximal gaps are same, and equal to 0xFFF * 0x61
+ And there is nothing to change this setting
+*/
+
+#define ENE_MAXGAP 250000
+#define ENE_MINGAP (127 * sample_period)
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME "enecir"
+#define ENE_TXBUF_SIZE (500 * sizeof(int)) /* 500 samples (arbitary) */
+
+#define ENE_IRQ_RX 1
+#define ENE_IRQ_TX 2
+
+#define ENE_HW_B 1 /* 3926B */
+#define ENE_HW_C 2 /* 3926C */
+#define ENE_HW_D 3 /* 3926D */
+
+#define ene_printk(level, text, ...) \
+ printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+#define ene_dbg(text, ...) \
+ if (debug) \
+ printk(KERN_DEBUG \
+ ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+#define ene_dbg_verbose(text, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG \
+ ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+
+struct ene_device {
+ struct pnp_dev *pnp_dev;
+ struct lirc_driver *lirc_driver;
+ int in_use;
+
+ /* hw IO settings */
+ unsigned long hw_io;
+ int irq;
+ spinlock_t hw_lock;
+
+ /* HW features */
+ int hw_revision; /* hardware revision */
+ int hw_learning_and_tx_capable; /* learning capable */
+ int hw_gpio40_learning; /* gpio40 is learning */
+ int hw_fan_as_normal_input; /* fan input is used as */
+ /* regular input */
+ /* HW state*/
+ int rx_pointer; /* hw pointer to rx buffer */
+ int rx_fan_input_inuse; /* is fan input in use for rx*/
+ int tx_reg; /* current reg used for TX */
+ u8 saved_conf1; /* saved FEC0 reg */
+ int learning_enabled; /* learning input enabled */
+
+ /* RX sample handling */
+ int rx_sample; /* current recieved sample */
+ int rx_sample_pulse; /* recieved sample is pulse */
+ int rx_idle; /* idle mode for RX activated */
+ struct timeval rx_gap_start; /* time of start of idle */
+ int rx_timeout; /* time in ms of RX timeout */
+ int rx_send_timeout_packet; /* do we send RX timeout */
+ int rx_timeout_sent; /* we sent the timeout packet */
+ int rx_carrier_sense; /* sense carrier */
+
+ /* TX sample handling */
+ unsigned int tx_sample; /* current sample for TX */
+ int tx_sample_pulse; /* current sample is pulse */
+
+ /* TX buffer */
+ int tx_buffer[ENE_TXBUF_SIZE]; /* input samples buffer*/
+ int tx_pos; /* position in that bufer */
+ int tx_len; /* current len of tx buffer */
+ int tx_underway; /* TX is under way*/
+ int tx_done; /* done transmitting */
+ /* one more sample pending*/
+ struct completion tx_complete; /* TX completion */
+ struct timer_list tx_sim_timer;
+
+ /*TX settings */
+ int tx_period;
+ int tx_duty_cycle;
+ int transmitter_mask;
+};
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
index 7db8cb68ab5d6..100c4d4b81254 100644
--- a/drivers/staging/lirc/Kconfig
+++ b/drivers/staging/lirc/Kconfig
@@ -18,14 +18,6 @@ config LIRC_BT829
help
Driver for the IR interface on BT829-based hardware
-config LIRC_ENE0100
- tristate "ENE KB3924/ENE0100 CIR Port Reciever"
- depends on LIRC_STAGING && PNP
- help
- This is a driver for CIR port handled by ENE KB3924 embedded
- controller found on some notebooks.
- It appears on PNP list as ENE0100.
-
config LIRC_I2C
tristate "I2C Based IR Receivers"
depends on LIRC_STAGING && I2C
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile
index bd789d8a0177e..4da1f3397a167 100644
--- a/drivers/staging/lirc/Makefile
+++ b/drivers/staging/lirc/Makefile
@@ -4,7 +4,6 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
-obj-$(CONFIG_LIRC_ENE0100) += lirc_ene0100.o
obj-$(CONFIG_LIRC_I2C) += lirc_i2c.o
obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o
obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
diff --git a/drivers/staging/lirc/lirc_ene0100.c b/drivers/staging/lirc/lirc_ene0100.c
deleted file mode 100644
index a152c52b07452..0000000000000
--- a/drivers/staging/lirc/lirc_ene0100.c
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include "lirc_ene0100.h"
-
-static int sample_period = 75;
-static int enable_idle = 1;
-static int enable_learning;
-
-static void ene_set_idle(struct ene_device *dev, int idle);
-static void ene_set_inputs(struct ene_device *dev, int enable);
-
-/* read a hardware register */
-static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
-{
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
- return inb(dev->hw_io + ENE_IO);
-}
-
-/* write a hardware register */
-static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
-{
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
- outb(value, dev->hw_io + ENE_IO);
-}
-
-/* change specific bits in hardware register */
-static void ene_hw_write_reg_mask(struct ene_device *dev,
- u16 reg, u8 value, u8 mask)
-{
- u8 regvalue;
-
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-
- regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
- regvalue |= (value & mask);
- outb(regvalue, dev->hw_io + ENE_IO);
-}
-
-/* read irq status and ack it */
-static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
-{
- u8 irq_status;
- u8 fw_flags1, fw_flags2;
-
- fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
-
- if (buffer_pointer)
- *buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
-
- if (dev->hw_revision < ENE_HW_C) {
- irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
-
- if (!(irq_status & ENEB_IRQ_STATUS_IR))
- return 0;
- ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
- irq_status & ~ENEB_IRQ_STATUS_IR);
-
- /* rev B support only recieving */
- return ENE_IRQ_RX;
- }
-
- irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
-
- if (!(irq_status & ENEC_IRQ_STATUS))
- return 0;
-
- /* original driver does that twice - a workaround ? */
- ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
- ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-
- /* clear unknown flag in F8F9 */
- if (fw_flags2 & ENE_FW2_IRQ_CLR)
- ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
-
- /* check if this is a TX interrupt */
- fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
-
- if (fw_flags1 & ENE_FW1_TXIRQ) {
- ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
- return ENE_IRQ_TX;
- } else
- return ENE_IRQ_RX;
-}
-
-static int ene_hw_detect(struct ene_device *dev)
-{
- u8 chip_major, chip_minor;
- u8 hw_revision, old_ver;
- u8 tmp;
- u8 fw_capabilities;
-
- tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
- ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
-
- chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
- chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
-
- ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
- hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
- old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
-
- if (hw_revision == 0xFF) {
-
- ene_printk(KERN_WARNING, "device seems to be disabled\n");
- ene_printk(KERN_WARNING,
- "send a mail to lirc-list@lists.sourceforge.net\n");
- ene_printk(KERN_WARNING, "please attach output of acpidump\n");
-
- return -ENODEV;
- }
-
- if (chip_major == 0x33) {
- ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
- return -ENODEV;
- }
-
- if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
- dev->hw_revision = ENE_HW_C;
- ene_printk(KERN_WARNING,
- "KB3926C detected, driver support is not complete!\n");
-
- } else if (old_ver == 0x24 && hw_revision == 0xC0) {
- dev->hw_revision = ENE_HW_B;
- ene_printk(KERN_NOTICE, "KB3926B detected\n");
- } else {
- dev->hw_revision = ENE_HW_D;
- ene_printk(KERN_WARNING,
- "unknown ENE chip detected, assuming KB3926D\n");
- ene_printk(KERN_WARNING, "driver support incomplete");
-
- }
-
- ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
- chip_major, chip_minor, old_ver, hw_revision);
-
-
- /* detect features hardware supports */
-
- if (dev->hw_revision < ENE_HW_C)
- return 0;
-
- fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
-
- dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
- dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
-
- dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
- fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
-
- ene_printk(KERN_NOTICE, "hardware features:\n");
- ene_printk(KERN_NOTICE,
- "learning and tx %s, gpio40_learn %s, fan_in %s\n",
- dev->hw_learning_and_tx_capable ? "on" : "off",
- dev->hw_gpio40_learning ? "on" : "off",
- dev->hw_fan_as_normal_input ? "on" : "off");
-
- if (!dev->hw_learning_and_tx_capable && enable_learning)
- enable_learning = 0;
-
- if (dev->hw_learning_and_tx_capable) {
- ene_printk(KERN_WARNING,
- "Device supports transmitting, but the driver doesn't\n");
- ene_printk(KERN_WARNING,
- "due to lack of hardware to test against.\n");
- ene_printk(KERN_WARNING,
- "Send a mail to: lirc-list@lists.sourceforge.net\n");
- }
- return 0;
-}
-
-/* hardware initialization */
-static int ene_hw_init(void *data)
-{
- u8 reg_value;
- struct ene_device *dev = (struct ene_device *)data;
- dev->in_use = 1;
-
- if (dev->hw_revision < ENE_HW_C) {
- ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
- ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
- } else {
- reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
- reg_value |= ENEC_IRQ_UNK_EN;
- reg_value &= ~ENEC_IRQ_STATUS;
- reg_value |= (dev->irq & ENEC_IRQ_MASK);
- ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
- ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
- }
-
- ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
- ene_set_inputs(dev, enable_learning);
-
- /* set sampling period */
- ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
-
- /* ack any pending irqs - just in case */
- ene_hw_irq_status(dev, NULL);
-
- /* enter idle mode */
- ene_set_idle(dev, 1);
-
- /* enable firmware bits */
- ene_hw_write_reg_mask(dev, ENE_FW1,
- ENE_FW1_ENABLE | ENE_FW1_IRQ,
- ENE_FW1_ENABLE | ENE_FW1_IRQ);
- /* clear stats */
- dev->sample = 0;
- return 0;
-}
-
-/* this enables gpio40 signal, used if connected to wide band input*/
-static void ene_enable_gpio40(struct ene_device *dev, int enable)
-{
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
- 0 : ENE_CIR_CONF2_GPIO40DIS,
- ENE_CIR_CONF2_GPIO40DIS);
-}
-
-/* this enables the classic sampler */
-static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
-{
- ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
-}
-
-/* this enables recieve via fan input */
-static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
-{
- if (!enable)
- ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
- else {
- ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
- ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
- }
- dev->fan_input_inuse = enable;
-}
-
-/* determine which input to use*/
-static void ene_set_inputs(struct ene_device *dev, int learning_enable)
-{
- ene_enable_normal_recieve(dev, 1);
-
- /* old hardware doesn't support learning mode for sure */
- if (dev->hw_revision <= ENE_HW_B)
- return;
-
- /* reciever not learning capable, still set gpio40 correctly */
- if (!dev->hw_learning_and_tx_capable) {
- ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
- return;
- }
-
- /* enable learning mode */
- if (learning_enable) {
- ene_enable_gpio40(dev, dev->hw_gpio40_learning);
-
- /* fan input is not used for learning */
- if (dev->hw_fan_as_normal_input)
- ene_enable_fan_recieve(dev, 0);
-
- /* disable learning mode */
- } else {
- if (dev->hw_fan_as_normal_input) {
- ene_enable_fan_recieve(dev, 1);
- ene_enable_normal_recieve(dev, 0);
- } else
- ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
- }
-
- /* set few additional settings for this mode */
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
- ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
-
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
- ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
-}
-
-/* deinitialization */
-static void ene_hw_deinit(void *data)
-{
- struct ene_device *dev = (struct ene_device *)data;
-
- /* disable samplers */
- ene_enable_normal_recieve(dev, 0);
-
- if (dev->hw_fan_as_normal_input)
- ene_enable_fan_recieve(dev, 0);
-
- /* disable hardware IRQ and firmware flag */
- ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
- ene_set_idle(dev, 1);
- dev->in_use = 0;
-}
-
-/* sends current sample to userspace */
-static void send_sample(struct ene_device *dev)
-{
- int value = abs(dev->sample) & PULSE_MASK;
-
- if (dev->sample > 0)
- value |= PULSE_BIT;
-
- if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
- lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
- wake_up(&dev->lirc_driver->rbuf->wait_poll);
- }
- dev->sample = 0;
-}
-
-/* this updates current sample */
-static void update_sample(struct ene_device *dev, int sample)
-{
- if (!dev->sample)
- dev->sample = sample;
- else if (same_sign(dev->sample, sample))
- dev->sample += sample;
- else {
- send_sample(dev);
- dev->sample = sample;
- }
-}
-
-/* enable or disable idle mode */
-static void ene_set_idle(struct ene_device *dev, int idle)
-{
- struct timeval now;
- int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
-
- ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
- disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
- ENE_CIR_SAMPLE_OVERFLOW);
- dev->idle = idle;
-
- /* remember when we have entered the idle mode */
- if (idle) {
- do_gettimeofday(&dev->gap_start);
- return;
- }
-
- /* send the gap between keypresses now */
- do_gettimeofday(&now);
-
- if (now.tv_sec - dev->gap_start.tv_sec > 16)
- dev->sample = space(PULSE_MASK);
- else
- dev->sample = dev->sample +
- space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
- + space(now.tv_usec - dev->gap_start.tv_usec);
-
- if (abs(dev->sample) > PULSE_MASK)
- dev->sample = space(PULSE_MASK);
- send_sample(dev);
-}
-
-/* interrupt handler */
-static irqreturn_t ene_hw_irq(int irq, void *data)
-{
- u16 hw_value;
- int i, hw_sample;
- int space;
- int buffer_pointer;
- int irq_status;
-
- struct ene_device *dev = (struct ene_device *)data;
- irq_status = ene_hw_irq_status(dev, &buffer_pointer);
-
- if (!irq_status)
- return IRQ_NONE;
-
- /* TODO: only RX for now */
- if (irq_status == ENE_IRQ_TX)
- return IRQ_HANDLED;
-
- for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
-
- hw_value = ene_hw_read_reg(dev,
- ENE_SAMPLE_BUFFER + buffer_pointer + i);
-
- if (dev->fan_input_inuse) {
- /* read high part of the sample */
- hw_value |= ene_hw_read_reg(dev,
- ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
-
- /* test for _space_ bit */
- space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
-
- /* clear space bit, and other unused bits */
- hw_value &= ENE_FAN_VALUE_MASK;
- hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
-
- } else {
- space = hw_value & ENE_SAMPLE_SPC_MASK;
- hw_value &= ENE_SAMPLE_VALUE_MASK;
- hw_sample = hw_value * sample_period;
- }
-
- /* no more data */
- if (!(hw_value))
- break;
-
- if (space)
- hw_sample *= -1;
-
- /* overflow sample recieved, handle it */
-
- if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
-
- if (dev->idle)
- continue;
-
- if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
- update_sample(dev, hw_sample);
- else
- ene_set_idle(dev, 1);
-
- continue;
- }
-
- /* normal first sample recieved */
- if (!dev->fan_input_inuse && dev->idle) {
- ene_set_idle(dev, 0);
-
- /* discard first recieved value, its random
- since its the time signal was off before
- first pulse if idle mode is enabled, HW
- does that for us */
-
- if (!enable_idle)
- continue;
- }
- update_sample(dev, hw_sample);
- send_sample(dev);
- }
- return IRQ_HANDLED;
-}
-
-static int ene_probe(struct pnp_dev *pnp_dev,
- const struct pnp_device_id *dev_id)
-{
- struct ene_device *dev;
- struct lirc_driver *lirc_driver;
- int error = -ENOMEM;
-
- dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
- if (!dev)
- goto err1;
-
- dev->pnp_dev = pnp_dev;
- pnp_set_drvdata(pnp_dev, dev);
-
-
- /* prepare lirc interface */
- error = -ENOMEM;
- lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-
- if (!lirc_driver)
- goto err2;
-
- dev->lirc_driver = lirc_driver;
-
- strcpy(lirc_driver->name, ENE_DRIVER_NAME);
- lirc_driver->minor = -1;
- lirc_driver->code_length = sizeof(int) * 8;
- lirc_driver->features = LIRC_CAN_REC_MODE2;
- lirc_driver->data = dev;
- lirc_driver->set_use_inc = ene_hw_init;
- lirc_driver->set_use_dec = ene_hw_deinit;
- lirc_driver->dev = &pnp_dev->dev;
- lirc_driver->owner = THIS_MODULE;
-
- lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-
- if (!lirc_driver->rbuf)
- goto err3;
-
- if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
- goto err4;
-
- error = -ENODEV;
- if (lirc_register_driver(lirc_driver))
- goto err5;
-
- /* validate resources */
- if (!pnp_port_valid(pnp_dev, 0) ||
- pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
- goto err6;
-
- if (!pnp_irq_valid(pnp_dev, 0))
- goto err6;
-
- dev->hw_io = pnp_port_start(pnp_dev, 0);
- dev->irq = pnp_irq(pnp_dev, 0);
-
- /* claim the resources */
- error = -EBUSY;
- if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
- goto err6;
-
- if (request_irq(dev->irq, ene_hw_irq,
- IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
- goto err7;
-
- /* detect hardware version and features */
- error = ene_hw_detect(dev);
- if (error)
- goto err8;
-
- ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
- return 0;
-
-err8:
- free_irq(dev->irq, dev);
-err7:
- release_region(dev->hw_io, ENE_MAX_IO);
-err6:
- lirc_unregister_driver(lirc_driver->minor);
-err5:
- lirc_buffer_free(lirc_driver->rbuf);
-err4:
- kfree(lirc_driver->rbuf);
-err3:
- kfree(lirc_driver);
-err2:
- kfree(dev);
-err1:
- return error;
-}
-
-static void ene_remove(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_hw_deinit(dev);
- free_irq(dev->irq, dev);
- release_region(dev->hw_io, ENE_MAX_IO);
- lirc_unregister_driver(dev->lirc_driver->minor);
- lirc_buffer_free(dev->lirc_driver->rbuf);
- kfree(dev->lirc_driver);
- kfree(dev);
-}
-
-#ifdef CONFIG_PM
-
-/* TODO: make 'wake on IR' configurable and add .shutdown */
-/* currently impossible due to lack of kernel support */
-
-static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
- return 0;
-}
-
-static int ene_resume(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- if (dev->in_use)
- ene_hw_init(dev);
-
- ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
- return 0;
-}
-
-#endif
-
-static const struct pnp_device_id ene_ids[] = {
- {.id = "ENE0100",},
- {},
-};
-
-static struct pnp_driver ene_driver = {
- .name = ENE_DRIVER_NAME,
- .id_table = ene_ids,
- .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
-
- .probe = ene_probe,
- .remove = __devexit_p(ene_remove),
-
-#ifdef CONFIG_PM
- .suspend = ene_suspend,
- .resume = ene_resume,
-#endif
-};
-
-static int __init ene_init(void)
-{
- if (sample_period < 5) {
- ene_printk(KERN_ERR, "sample period must be at\n");
- ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
- return -EINVAL;
- }
- return pnp_register_driver(&ene_driver);
-}
-
-static void ene_exit(void)
-{
- pnp_unregister_driver(&ene_driver);
-}
-
-module_param(sample_period, int, S_IRUGO);
-MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
-
-module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(enable_idle,
- "Enables turning off signal sampling after long inactivity time; "
- "if disabled might help detecting input signal (default: enabled)");
-
-module_param(enable_learning, bool, S_IRUGO);
-MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
-
-MODULE_DEVICE_TABLE(pnp, ene_ids);
-MODULE_DESCRIPTION
- ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
-MODULE_AUTHOR("Maxim Levitsky");
-MODULE_LICENSE("GPL");
-
-module_init(ene_init);
-module_exit(ene_exit);
--
GitLab
From 931e39a13924f528754f07555689f77588e97763 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat, 31 Jul 2010 11:59:26 -0300
Subject: [PATCH 480/863] V4L/DVB: IR: Port ene driver to new IR subsystem and
enable it
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
MAINTAINERS | 6 +
drivers/media/IR/Kconfig | 14 +
drivers/media/IR/Makefile | 1 +
drivers/media/IR/ene_ir.c | 595 ++++++++++++++------------------------
drivers/media/IR/ene_ir.h | 49 ++--
5 files changed, 264 insertions(+), 401 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0af9595884aae..423eadd124ad0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2203,6 +2203,12 @@ F: drivers/misc/cb710/
F: drivers/mmc/host/cb710-mmc.*
F: include/linux/cb710.h
+ENE KB2426 (ENE0100/ENE020XX) INFRARED RECEIVER
+M: Maxim Levitsky <maximlevitsky@gmail.com>
+S: Maintained
+F: drivers/media/IR/ene_ir.c
+F: drivers/media/IR/ene_ir.h
+
EPSON 1355 FRAMEBUFFER DRIVER
M: Christopher Hoover <ch@murgatroid.com>
M: Christopher Hoover <ch@hpl.hp.com>
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index 9e8f82d85cb30..30e04915a256d 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -106,6 +106,20 @@ config IR_MCEUSB
To compile this driver as a module, choose M here: the
module will be called mceusb.
+config IR_ENE
+ tristate "ENE eHome Receiver/Transciever (pnp id: ENE0100/ENE02xxx)"
+ depends on PNP
+ depends on IR_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transciever made by ENE.
+
+ You can see if you have it by looking at lspnp output.
+ Output should include ENE0100 ENE0200 or something similiar.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ene_ir.
+
config IR_STREAMZAP
tristate "Streamzap PC Remote IR Receiver"
depends on USB_ARCH_HAS_HCD
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index 2566fb4f356e7..53676838fe97d 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -16,4 +16,5 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
# stand-alone IR receivers/transmitters
obj-$(CONFIG_IR_IMON) += imon.o
obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_ENE) += ene_ir.o
obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
diff --git a/drivers/media/IR/ene_ir.c b/drivers/media/IR/ene_ir.c
index 9d11caf55b035..5447750f5e38d 100644
--- a/drivers/media/IR/ene_ir.c
+++ b/drivers/media/IR/ene_ir.c
@@ -1,5 +1,5 @@
/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ * driver for ENE KB3926 B/C/D CIR (pnp id: ENE0XXX)
*
* Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
*
@@ -25,20 +25,20 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
-#include <linux/uaccess.h>
-#include "lirc_ene0100.h"
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+#include "ene_ir.h"
static int sample_period = -1;
static int enable_idle = 1;
-static int enable_duty_carrier;
static int input = 1;
static int debug;
static int txsim;
-static void ene_rx_set_idle(struct ene_device *dev, int idle);
static int ene_irq_status(struct ene_device *dev);
-static void ene_send_sample(struct ene_device *dev, unsigned long sample);
/* read a hardware register */
static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
@@ -85,6 +85,7 @@ static int ene_hw_detect(struct ene_device *dev)
u8 hw_revision, old_ver;
u8 tmp;
u8 fw_capabilities;
+ int pll_freq;
tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
@@ -96,6 +97,17 @@ static int ene_hw_detect(struct ene_device *dev)
hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+ pll_freq = (ene_hw_read_reg(dev, ENE_PLLFRH) << 4) +
+ (ene_hw_read_reg(dev, ENE_PLLFRL) >> 4);
+
+ if (pll_freq != 1000)
+ dev->rx_period_adjust = 4;
+ else
+ dev->rx_period_adjust = 2;
+
+
+ ene_printk(KERN_NOTICE, "PLL freq = %d\n", pll_freq);
+
if (hw_revision == 0xFF) {
ene_printk(KERN_WARNING, "device seems to be disabled\n");
@@ -160,7 +172,7 @@ static int ene_hw_detect(struct ene_device *dev)
}
/* this enables/disables IR input via gpio40*/
-static void ene_enable_gpio40_recieve(struct ene_device *dev, int enable)
+static void ene_enable_gpio40_receive(struct ene_device *dev, int enable)
{
ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ?
0 : ENE_CIR_CONF2_GPIO40DIS,
@@ -168,13 +180,13 @@ static void ene_enable_gpio40_recieve(struct ene_device *dev, int enable)
}
/* this enables/disables IR via standard input */
-static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
+static void ene_enable_normal_receive(struct ene_device *dev, int enable)
{
ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0);
}
/* this enables/disables IR input via unused fan tachtometer input */
-static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
+static void ene_enable_fan_receive(struct ene_device *dev, int enable)
{
if (!enable)
ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
@@ -186,7 +198,7 @@ static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
}
-/* Sense current recieved carrier */
+/* Sense current received carrier */
static int ene_rx_sense_carrier(struct ene_device *dev)
{
int period = ene_hw_read_reg(dev, ENE_RX_CARRIER);
@@ -209,37 +221,37 @@ static int ene_rx_sense_carrier(struct ene_device *dev)
/* determine which input to use*/
static void ene_rx_set_inputs(struct ene_device *dev)
{
- int learning_mode = dev->learning_enabled || dev->rx_carrier_sense;
+ int learning_mode = dev->learning_enabled;
- ene_dbg("RX: setup reciever, learning mode = %d", learning_mode);
+ ene_dbg("RX: setup receiver, learning mode = %d", learning_mode);
- ene_enable_normal_recieve(dev, 1);
+ ene_enable_normal_receive(dev, 1);
/* old hardware doesn't support learning mode for sure */
if (dev->hw_revision <= ENE_HW_B)
return;
- /* reciever not learning capable, still set gpio40 correctly */
+ /* receiver not learning capable, still set gpio40 correctly */
if (!dev->hw_learning_and_tx_capable) {
- ene_enable_gpio40_recieve(dev, !dev->hw_gpio40_learning);
+ ene_enable_gpio40_receive(dev, !dev->hw_gpio40_learning);
return;
}
/* enable learning mode */
if (learning_mode) {
- ene_enable_gpio40_recieve(dev, dev->hw_gpio40_learning);
+ ene_enable_gpio40_receive(dev, dev->hw_gpio40_learning);
/* fan input is not used for learning */
if (dev->hw_fan_as_normal_input)
- ene_enable_fan_recieve(dev, 0);
+ ene_enable_fan_receive(dev, 0);
/* disable learning mode */
} else {
if (dev->hw_fan_as_normal_input) {
- ene_enable_fan_recieve(dev, 1);
- ene_enable_normal_recieve(dev, 0);
+ ene_enable_fan_receive(dev, 1);
+ ene_enable_normal_receive(dev, 0);
} else
- ene_enable_gpio40_recieve(dev,
+ ene_enable_gpio40_receive(dev,
!dev->hw_gpio40_learning);
}
@@ -249,6 +261,16 @@ static void ene_rx_set_inputs(struct ene_device *dev)
ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ?
ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+
+ if (dev->rx_fan_input_inuse) {
+ dev->props->rx_resolution = ENE_SAMPLE_PERIOD_FAN * 1000;
+
+ dev->props->timeout =
+ ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN * 1000;
+ } else {
+ dev->props->rx_resolution = sample_period * 1000;
+ dev->props->timeout = ENE_MAXGAP * 1000;
+ }
}
/* Enable the device for receive */
@@ -277,147 +299,33 @@ static void ene_rx_enable(struct ene_device *dev)
/* ack any pending irqs - just in case */
ene_irq_status(dev);
- /* enter idle mode */
- ene_rx_set_idle(dev, 1);
-
/* enable firmware bits */
ene_hw_write_reg_mask(dev, ENE_FW1,
ENE_FW1_ENABLE | ENE_FW1_IRQ,
ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ /* enter idle mode */
+ ir_raw_event_set_idle(dev->idev, 1);
+ ir_raw_event_reset(dev->idev);
+
}
-/* Disable the device reciever */
+/* Disable the device receiver */
static void ene_rx_disable(struct ene_device *dev)
{
/* disable inputs */
- ene_enable_normal_recieve(dev, 0);
+ ene_enable_normal_receive(dev, 0);
if (dev->hw_fan_as_normal_input)
- ene_enable_fan_recieve(dev, 0);
+ ene_enable_fan_receive(dev, 0);
/* disable hardware IRQ and firmware flag */
ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
- ene_rx_set_idle(dev, 1);
-}
-
-/* send current sample to the user */
-static void ene_rx_flush(struct ene_device *dev, int timeout)
-{
- unsigned long value;
-
- value = dev->rx_sample_pulse ? LIRC_PULSE(dev->rx_sample) :
- LIRC_SPACE(dev->rx_sample);
- ene_send_sample(dev, value);
- dev->rx_sample = 0;
- dev->rx_sample_pulse = 0;
-}
-
-/* recieve new sample and process it */
-static void ene_rx_sample(struct ene_device *dev, int sample, int is_pulse)
-{
- ene_dbg("RX: sample %8d (%s)", sample, is_pulse ? "pulse" : "space");
-
- /* ignore spaces in idle mode, can get them on revC */
- /* also ignore a space in front of first pulse */
- if (dev->rx_idle && !is_pulse)
- return;
-
- /* get out of idle mode now */
- if (dev->rx_idle)
- ene_rx_set_idle(dev, 0);
-
- if (!dev->rx_sample) {
- dev->rx_sample = sample;
- dev->rx_sample_pulse = is_pulse;
- } else if (is_pulse == dev->rx_sample_pulse)
- dev->rx_sample += sample;
- else {
- ene_rx_flush(dev, 0);
- dev->rx_sample = sample;
- dev->rx_sample_pulse = is_pulse;
- }
-
- if (is_pulse)
- return;
-
- /* overflow sample from fan input recieved, enable idle mode */
- if (dev->rx_fan_input_inuse &&
- sample == ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN) {
- ene_rx_set_idle(dev, 1);
- return;
- }
-
- if (!dev->rx_fan_input_inuse) {
- /* Report timeout if enabled */
- if (dev->rx_timeout && dev->rx_send_timeout_packet &&
- !dev->rx_timeout_sent &&
- dev->rx_sample > dev->rx_timeout) {
- ene_dbg("RX: sending timeout sample");
- ene_send_sample(dev, LIRC_TIMEOUT(dev->rx_sample));
- dev->rx_timeout_sent = 1;
- }
-
- /* too large sample accumulated via normal input.
- note that on revC, hardware idle mode turns on automaticly,
- so max gap should be less that the gap after which
- hw stops sending samples */
- if (dev->rx_sample > ENE_MAXGAP) {
- ene_rx_set_idle(dev, 1);
- return;
- }
- }
+ ir_raw_event_set_idle(dev->idev, 1);
+ ir_raw_event_reset(dev->idev);
}
-/* enable or disable idle mode */
-static void ene_rx_set_idle(struct ene_device *dev, int idle)
-{
- struct timeval now;
- int disable_sampler = 0;
-
-
- /* Also put hardware sampler in 'idle' mode on revB*/
- /* revC and higher do that automaticly (firmware does?) */
- if ((dev->hw_revision < ENE_HW_C) && enable_idle)
- if (idle)
- disable_sampler = 1;
-
- ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
- disable_sampler ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
- ENE_CIR_SAMPLE_OVERFLOW);
- dev->rx_idle = idle;
-
- /* remember when we have entered the idle mode */
- if (idle) {
- ene_dbg("RX: going into idle mode");
- do_gettimeofday(&dev->rx_gap_start);
- return;
- }
-
- ene_dbg("RX: back from idle mode");
-
- /* send the gap between keypresses now */
- do_gettimeofday(&now);
-
- if (dev->rx_sample_pulse) {
- ene_dbg("RX: somehow we recieved a pulse before idle mode???");
- return;
- }
-
- /* manually calculate and recieve the gap between keypresses */
- if (now.tv_sec - dev->rx_gap_start.tv_sec > 16)
- dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
- else
- dev->rx_sample +=
- 1000000ull * (now.tv_sec - dev->rx_gap_start.tv_sec)
- + now.tv_usec - dev->rx_gap_start.tv_usec;
-
- if (dev->rx_sample > LIRC_SPACE(LIRC_VALUE_MASK))
- dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
-
- ene_rx_flush(dev, 0);
- dev->rx_timeout_sent = 0;
-}
/* prepare transmission */
static void ene_tx_prepare(struct ene_device *dev)
@@ -436,6 +344,8 @@ static void ene_tx_prepare(struct ene_device *dev)
/* Set carrier */
if (dev->tx_period) {
+ /* NOTE: duty cycle handling is just a guess, it might
+ not be aviable. Default values were tested */
int tx_period_in500ns = dev->tx_period * 2;
int tx_pulse_width_in_500ns =
@@ -459,7 +369,6 @@ static void ene_tx_prepare(struct ene_device *dev)
conf1 &= ~ENE_CIR_CONF1_TX_CARR;
ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1);
- dev->tx_underway = 1;
}
@@ -467,11 +376,11 @@ static void ene_tx_prepare(struct ene_device *dev)
static void ene_tx_complete(struct ene_device *dev)
{
ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1);
- dev->tx_underway = 0;
+ dev->tx_buffer = NULL;
}
/* set transmit mask */
-static void ene_tx_set_transmiter_mask(struct ene_device *dev)
+static void ene_tx_hw_set_transmiter_mask(struct ene_device *dev)
{
u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN;
u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN;
@@ -492,8 +401,8 @@ static void ene_tx_sample(struct ene_device *dev)
u8 raw_tx;
u32 sample;
- if (!dev->tx_underway) {
- ene_dbg("TX: attempt to transmit while hw isn't setup");
+ if (!dev->tx_buffer) {
+ ene_dbg("TX: attempt to transmit NULL buffer");
return;
}
@@ -623,6 +532,7 @@ static irqreturn_t ene_isr(int irq, void *data)
int carrier = 0;
irqreturn_t retval = IRQ_NONE;
struct ene_device *dev = (struct ene_device *)data;
+ struct ir_raw_event ev;
spin_lock_irqsave(&dev->hw_lock, flags);
@@ -646,12 +556,13 @@ static irqreturn_t ene_isr(int irq, void *data)
goto unlock;
- if ((debug && dev->learning_enabled) || dev->rx_carrier_sense)
+ if (dev->carrier_detect_enabled || debug)
carrier = ene_rx_sense_carrier(dev);
-
- if (dev->rx_carrier_sense && carrier)
- ene_send_sample(dev, LIRC_FREQUENCY(carrier));
-
+#if 0
+ /* TODO */
+ if (dev->carrier_detect_enabled && carrier)
+ ir_raw_event_report_frequency(dev->idev, carrier);
+#endif
for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
hw_value = ene_hw_read_reg(dev,
@@ -672,13 +583,25 @@ static irqreturn_t ene_isr(int irq, void *data)
pulse = !(hw_value & ENE_SAMPLE_SPC_MASK);
hw_value &= ENE_SAMPLE_VALUE_MASK;
hw_sample = hw_value * sample_period;
+
+ if (dev->rx_period_adjust) {
+ hw_sample *= (100 - dev->rx_period_adjust);
+ hw_sample /= 100;
+ }
}
/* no more data */
if (!(hw_value))
break;
- ene_rx_sample(dev, hw_sample, pulse);
+ ene_dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
+
+
+ ev.duration = hw_sample * 1000;
+ ev.pulse = pulse;
+ ir_raw_event_store_with_filter(dev->idev, &ev);
}
+
+ ir_raw_event_handle(dev->idev);
unlock:
spin_unlock_irqrestore(&dev->hw_lock, flags);
return retval;
@@ -687,8 +610,6 @@ static irqreturn_t ene_isr(int irq, void *data)
/* Initialize default settings */
static void ene_setup_settings(struct ene_device *dev)
{
- dev->rx_send_timeout_packet = 0;
- dev->rx_timeout = ENE_MAXGAP;
dev->tx_period = 32;
dev->tx_duty_cycle = 25; /*%*/
dev->transmitter_mask = 3;
@@ -698,11 +619,7 @@ static void ene_setup_settings(struct ene_device *dev)
dev->learning_enabled =
(input == 2 && dev->hw_learning_and_tx_capable);
- /* Clear accumulated sample bufer */
- dev->rx_sample = 0;
- dev->rx_sample_pulse = 0;
dev->rx_pointer = -1;
- dev->rx_carrier_sense = 0;
}
@@ -732,144 +649,97 @@ static void ene_close(void *data)
spin_unlock_irqrestore(&dev->hw_lock, flags);
}
-/* outside interface for settings */
-static int ene_ioctl(struct inode *node, struct file *file,
- unsigned int cmd, unsigned long arg)
+/* outside interface: set transmitter mask */
+static int ene_set_tx_mask(void *data, u32 tx_mask)
{
- int lvalue = 0, retval, tmp;
+ struct ene_device *dev = (struct ene_device *)data;
unsigned long flags;
- struct ene_device *dev = lirc_get_pdata(file);
-
-
- switch (cmd) {
- case LIRC_SET_SEND_CARRIER:
- case LIRC_SET_SEND_DUTY_CYCLE:
- case LIRC_SET_TRANSMITTER_MASK:
- case LIRC_SET_MEASURE_CARRIER_MODE:
- case LIRC_SET_REC_CARRIER:
- /* All these aren't possible without this */
- if (!dev->hw_learning_and_tx_capable)
- return -ENOSYS;
- /* Fall through */
- case LIRC_SET_REC_TIMEOUT:
- case LIRC_SET_REC_TIMEOUT_REPORTS:
- retval = get_user(lvalue, (unsigned int *) arg);
- if (retval)
- return retval;
+ ene_dbg("TX: attempt to set transmitter mask %02x", tx_mask);
+
+ /* invalid txmask */
+ if (!tx_mask || tx_mask & ~0x3) {
+ ene_dbg("TX: invalid mask");
+ /* return count of transmitters */
+ return 2;
}
- switch (cmd) {
- case LIRC_SET_SEND_CARRIER:
- ene_dbg("TX: attempt to set tx carrier to %d kHz", lvalue);
- tmp = 1000000 / lvalue; /* (1 / freq) (* # usec in 1 sec) */
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->transmitter_mask = tx_mask;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
- if (tmp && (tmp > ENE_TX_PERIOD_MAX ||
- tmp < ENE_TX_PERIOD_MIN)) {
+/* outside interface : set tx carrier */
+static int ene_set_tx_carrier(void *data, u32 carrier)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ u32 period = 1000000 / carrier; /* (1 / freq) (* # usec in 1 sec) */
- ene_dbg("TX: out of range %d-%d carrier, "
- "falling back to 32 kHz",
- 1000 / ENE_TX_PERIOD_MIN,
- 1000 / ENE_TX_PERIOD_MAX);
+ ene_dbg("TX: attempt to set tx carrier to %d kHz", carrier);
- tmp = 32; /* this is just a coincidence!!! */
- }
- ene_dbg("TX: set carrier to %d kHz", lvalue);
+ if (period && (period > ENE_TX_PERIOD_MAX ||
+ period < ENE_TX_PERIOD_MIN)) {
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->tx_period = tmp;
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- break;
- case LIRC_SET_SEND_DUTY_CYCLE:
- ene_dbg("TX: attempt to set duty cycle to %d%%", lvalue);
+ ene_dbg("TX: out of range %d-%d carrier, "
+ "falling back to 32 kHz",
+ 1000 / ENE_TX_PERIOD_MIN,
+ 1000 / ENE_TX_PERIOD_MAX);
- if ((lvalue >= 100) || (lvalue <= 0)) {
- retval = -EINVAL;
- break;
- }
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->tx_duty_cycle = lvalue;
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- break;
- case LIRC_SET_TRANSMITTER_MASK:
- ene_dbg("TX: attempt to set transmitter mask %02x", lvalue);
-
- /* invalid txmask */
- if (!lvalue || lvalue & ~0x3) {
- ene_dbg("TX: invalid mask");
- /* this supposed to return num of transmitters */
- retval = 2;
- break;
- }
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->transmitter_mask = lvalue;
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- break;
- case LIRC_SET_REC_CARRIER:
- tmp = (lvalue > ENE_NORMAL_RX_HI || lvalue < ENE_NORMAL_RX_LOW);
-
- if (tmp != dev->learning_enabled) {
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->learning_enabled = tmp;
- ene_rx_set_inputs(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- }
- break;
- case LIRC_SET_REC_TIMEOUT:
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->rx_timeout = lvalue;
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- ene_dbg("RX: set rx report timeout to %d", dev->rx_timeout);
- break;
- case LIRC_SET_REC_TIMEOUT_REPORTS:
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->rx_send_timeout_packet = lvalue;
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- ene_dbg("RX: %sable timeout reports",
- dev->rx_send_timeout_packet ? "en" : "dis");
- break;
- case LIRC_SET_MEASURE_CARRIER_MODE:
- if (dev->rx_carrier_sense == lvalue)
- break;
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->rx_carrier_sense = lvalue;
- ene_rx_set_inputs(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- break;
- case LIRC_GET_REC_RESOLUTION:
- tmp = dev->rx_fan_input_inuse ?
- ENE_SAMPLE_PERIOD_FAN : sample_period;
- retval = put_user(tmp, (unsigned long *) arg);
- break;
- default:
- retval = -ENOIOCTLCMD;
- break;
+ period = 32; /* this is just a coincidence!!! */
}
+ ene_dbg("TX: set carrier to %d kHz", carrier);
- return retval;
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->tx_period = period;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
}
-/* outside interface: transmit */
-static ssize_t ene_transmit(struct file *file, const char *buf,
- size_t n, loff_t *ppos)
+
+/* outside interface: enable learning mode */
+static int ene_set_learning_mode(void *data, int enable)
{
- struct ene_device *dev = lirc_get_pdata(file);
+ struct ene_device *dev = (struct ene_device *)data;
unsigned long flags;
+ if (enable == dev->learning_enabled)
+ return 0;
- if (!dev)
- return -EFAULT;
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->learning_enabled = enable;
+ ene_rx_set_inputs(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
- if (!dev->hw_learning_and_tx_capable)
- return -ENODEV;
+/* outside interface: set rec carrier */
+static int ene_set_rec_carrier(void *data, u32 min, u32 max)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ ene_set_learning_mode(dev,
+ max > ENE_NORMAL_RX_HI || min < ENE_NORMAL_RX_LOW);
+ return 0;
+}
- if (n % sizeof(int))
- return -EINVAL;
+/* outside interface: enable or disable idle mode */
+static void ene_rx_set_idle(void *data, int idle)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ ene_dbg("%sabling idle mode", idle ? "en" : "dis");
- if (n > ENE_TXBUF_SIZE * sizeof(int))
- return -ENOMEM;
+ ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+ (enable_idle && idle) ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+ ENE_CIR_SAMPLE_OVERFLOW);
+}
- if (copy_from_user(dev->tx_buffer, buf, n))
- return -EFAULT;
+/* outside interface: transmit */
+static int ene_transmit(void *data, int *buf, u32 n)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ dev->tx_buffer = buf;
dev->tx_len = n / sizeof(int);
dev->tx_pos = 0;
dev->tx_reg = 0;
@@ -881,7 +751,7 @@ static ssize_t ene_transmit(struct file *file, const char *buf,
spin_lock_irqsave(&dev->hw_lock, flags);
- ene_tx_set_transmiter_mask(dev);
+ ene_tx_hw_set_transmiter_mask(dev);
ene_tx_prepare(dev);
/* Transmit first two samples */
@@ -897,80 +767,35 @@ static ssize_t ene_transmit(struct file *file, const char *buf,
spin_unlock_irqrestore(&dev->hw_lock, flags);
} else
ene_dbg("TX: done");
-
return n;
}
-/* Sends one sample to the user */
-static void ene_send_sample(struct ene_device *dev, unsigned long sample)
-{
- if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
- lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&sample);
- wake_up(&dev->lirc_driver->rbuf->wait_poll);
- }
-}
-
-
-static const struct file_operations ene_fops = {
- .owner = THIS_MODULE,
- .write = ene_transmit,
- .ioctl = ene_ioctl,
-};
-/* main load function */
-static int ene_probe(struct pnp_dev *pnp_dev,
- const struct pnp_device_id *dev_id)
+/* probe entry */
+static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
{
- struct ene_device *dev;
- struct lirc_driver *lirc_driver;
int error = -ENOMEM;
+ struct ir_dev_props *ir_props;
+ struct input_dev *input_dev;
+ struct ene_device *dev;
+ /* allocate memory */
+ input_dev = input_allocate_device();
+ ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
- if (!dev)
- goto err1;
-
- dev->pnp_dev = pnp_dev;
- pnp_set_drvdata(pnp_dev, dev);
-
- /* prepare lirc interface */
- error = -ENOMEM;
- lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-
- if (!lirc_driver)
- goto err2;
-
- dev->lirc_driver = lirc_driver;
-
- strcpy(lirc_driver->name, ENE_DRIVER_NAME);
- lirc_driver->minor = -1;
- lirc_driver->code_length = sizeof(int) * 8;
- lirc_driver->features = LIRC_CAN_REC_MODE2 |
- LIRC_CAN_GET_REC_RESOLUTION |
- LIRC_CAN_SET_REC_TIMEOUT;
- lirc_driver->data = dev;
- lirc_driver->set_use_inc = ene_open;
- lirc_driver->set_use_dec = ene_close;
- lirc_driver->dev = &pnp_dev->dev;
- lirc_driver->owner = THIS_MODULE;
- lirc_driver->fops = &ene_fops;
- lirc_driver->min_timeout = ENE_MINGAP;
- lirc_driver->max_timeout = ENE_MAXGAP;
- lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-
- if (!lirc_driver->rbuf)
- goto err3;
-
- if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 512))
- goto err4;
+ if (!input_dev || !ir_props || !dev)
+ goto error;
/* validate resources */
+ error = -ENODEV;
+
if (!pnp_port_valid(pnp_dev, 0) ||
pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
- goto err5;
+ goto error;
if (!pnp_irq_valid(pnp_dev, 0))
- goto err5;
+ goto error;
dev->hw_io = pnp_port_start(pnp_dev, 0);
dev->irq = pnp_irq(pnp_dev, 0);
@@ -979,16 +804,19 @@ static int ene_probe(struct pnp_dev *pnp_dev,
/* claim the resources */
error = -EBUSY;
if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
- goto err5;
+ goto error;
if (request_irq(dev->irq, ene_isr,
IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
- goto err6;
+ goto error;
+
+ pnp_set_drvdata(pnp_dev, dev);
+ dev->pnp_dev = pnp_dev;
/* detect hardware version and features */
error = ene_hw_detect(dev);
if (error)
- goto err7;
+ goto error;
ene_setup_settings(dev);
@@ -1000,19 +828,21 @@ static int ene_probe(struct pnp_dev *pnp_dev,
"Simulation of TX activated\n");
}
- if (dev->hw_learning_and_tx_capable) {
- lirc_driver->features |= LIRC_CAN_SEND_PULSE |
- LIRC_CAN_SET_SEND_CARRIER |
- LIRC_CAN_SET_TRANSMITTER_MASK;
+ ir_props->driver_type = RC_DRIVER_IR_RAW;
+ ir_props->allowed_protos = IR_TYPE_ALL;
+ ir_props->priv = dev;
+ ir_props->open = ene_open;
+ ir_props->close = ene_close;
+ ir_props->min_timeout = ENE_MINGAP * 1000;
+ ir_props->max_timeout = ENE_MAXGAP * 1000;
+ ir_props->timeout = ENE_MAXGAP * 1000;
- if (enable_duty_carrier)
- lirc_driver->features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
+ if (dev->hw_revision == ENE_HW_B)
+ ir_props->s_idle = ene_rx_set_idle;
- if (input == 0)
- lirc_driver->features |= LIRC_CAN_SET_REC_CARRIER;
- init_completion(&dev->tx_complete);
- }
+ dev->props = ir_props;
+ dev->idev = input_dev;
/* don't allow too short/long sample periods */
if (sample_period < 5 || sample_period > 0x7F)
@@ -1029,29 +859,50 @@ static int ene_probe(struct pnp_dev *pnp_dev,
sample_period = 75;
}
+ ir_props->rx_resolution = sample_period * 1000;
+
+ if (dev->hw_learning_and_tx_capable) {
+
+ ir_props->s_learning_mode = ene_set_learning_mode;
+
+ if (input == 0)
+ ir_props->s_rx_carrier_range = ene_set_rec_carrier;
+
+ init_completion(&dev->tx_complete);
+ ir_props->tx_ir = ene_transmit;
+ ir_props->s_tx_mask = ene_set_tx_mask;
+ ir_props->s_tx_carrier = ene_set_tx_carrier;
+ ir_props->tx_resolution = ENE_TX_SMPL_PERIOD * 1000;
+ /* ir_props->s_carrier_report = ene_set_carrier_report; */
+ }
+
+
device_set_wakeup_capable(&pnp_dev->dev, 1);
device_set_wakeup_enable(&pnp_dev->dev, 1);
+ if (dev->hw_learning_and_tx_capable)
+ input_dev->name = "ENE eHome Infrared Remote Transceiver";
+ else
+ input_dev->name = "ENE eHome Infrared Remote Receiver";
+
+
error = -ENODEV;
- if (lirc_register_driver(lirc_driver))
- goto err7;
+ if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
+ ENE_DRIVER_NAME))
+ goto error;
+
ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
return 0;
-
-err7:
- free_irq(dev->irq, dev);
-err6:
- release_region(dev->hw_io, ENE_MAX_IO);
-err5:
- lirc_buffer_free(lirc_driver->rbuf);
-err4:
- kfree(lirc_driver->rbuf);
-err3:
- kfree(lirc_driver);
-err2:
+error:
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+ if (dev->hw_io)
+ release_region(dev->hw_io, ENE_MAX_IO);
+
+ input_free_device(input_dev);
+ kfree(ir_props);
kfree(dev);
-err1:
return error;
}
@@ -1067,9 +918,8 @@ static void ene_remove(struct pnp_dev *pnp_dev)
free_irq(dev->irq, dev);
release_region(dev->hw_io, ENE_MAX_IO);
- lirc_unregister_driver(dev->lirc_driver->minor);
- lirc_buffer_free(dev->lirc_driver->rbuf);
- kfree(dev->lirc_driver);
+ ir_input_unregister(dev->idev);
+ kfree(dev->props);
kfree(dev);
}
@@ -1113,6 +963,7 @@ static const struct pnp_device_id ene_ids[] = {
{.id = "ENE0100",},
{.id = "ENE0200",},
{.id = "ENE0201",},
+ {.id = "ENE0202",},
{},
};
@@ -1160,13 +1011,9 @@ module_param(txsim, bool, S_IRUGO);
MODULE_PARM_DESC(txsim,
"Simulate TX features on unsupported hardware (dangerous)");
-module_param(enable_duty_carrier, bool, S_IRUGO);
-MODULE_PARM_DESC(enable_duty_carrier,
- "Enable a code that might allow to to set TX carrier duty cycle");
-
MODULE_DEVICE_TABLE(pnp, ene_ids);
MODULE_DESCRIPTION
- ("LIRC driver for KB3926B/KB3926C/KB3926D "
+ ("Infrared input driver for KB3926B/KB3926C/KB3926D "
"(aka ENE0100/ENE0200/ENE0201) CIR port");
MODULE_AUTHOR("Maxim Levitsky");
diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/IR/ene_ir.h
index b464a680d8ae1..54c76af0d033f 100644
--- a/drivers/media/IR/ene_ir.h
+++ b/drivers/media/IR/ene_ir.h
@@ -1,5 +1,5 @@
/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0XXX)
*
* Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
*
@@ -19,8 +19,7 @@
* USA
*/
#include <linux/spinlock.h>
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
+
/* hardware address */
#define ENE_STATUS 0 /* hardware status - unused */
@@ -88,7 +87,7 @@
#define ENE_CIR_CONF1 0xFEC0
#define ENE_CIR_CONF1_TX_CLEAR 0x01 /* clear that on revC */
/* while transmitting */
-#define ENE_CIR_CONF1_RX_ON 0x07 /* normal reciever enabled */
+#define ENE_CIR_CONF1_RX_ON 0x07 /* normal receiver enabled */
#define ENE_CIR_CONF1_LEARN1 0x08 /* enabled on learning mode */
#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */
#define ENE_CIR_CONF1_TX_CARR 0x80 /* send TX carrier or not */
@@ -112,7 +111,7 @@
/* Unknown TX setting - TX sample period ??? */
#define ENE_TX_UNK1 0xFECB /* set to 0x63 */
-/* Current recieved carrier period */
+/* Current received carrier period */
#define ENE_RX_CARRIER 0xFECC /* RX period (500 ns) */
#define ENE_RX_CARRIER_VALID 0x80 /* Register content valid */
@@ -124,6 +123,9 @@
/* Hardware versions */
#define ENE_HW_VERSION 0xFF00 /* hardware revision */
+#define ENE_PLLFRH 0xFF16
+#define ENE_PLLFRL 0xFF17
+
#define ENE_HW_UNK 0xFF1D
#define ENE_HW_UNK_CLR 0x04
#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */
@@ -162,8 +164,7 @@
/******************************************************************************/
-#define ENE_DRIVER_NAME "enecir"
-#define ENE_TXBUF_SIZE (500 * sizeof(int)) /* 500 samples (arbitary) */
+#define ENE_DRIVER_NAME "ene_ir"
#define ENE_IRQ_RX 1
#define ENE_IRQ_TX 2
@@ -188,7 +189,8 @@
struct ene_device {
struct pnp_dev *pnp_dev;
- struct lirc_driver *lirc_driver;
+ struct input_dev *idev;
+ struct ir_dev_props *props;
int in_use;
/* hw IO settings */
@@ -198,43 +200,36 @@ struct ene_device {
/* HW features */
int hw_revision; /* hardware revision */
- int hw_learning_and_tx_capable; /* learning capable */
- int hw_gpio40_learning; /* gpio40 is learning */
- int hw_fan_as_normal_input; /* fan input is used as */
+ bool hw_learning_and_tx_capable; /* learning capable */
+ bool hw_gpio40_learning; /* gpio40 is learning */
+ bool hw_fan_as_normal_input; /* fan input is used as */
/* regular input */
/* HW state*/
int rx_pointer; /* hw pointer to rx buffer */
- int rx_fan_input_inuse; /* is fan input in use for rx*/
+ bool rx_fan_input_inuse; /* is fan input in use for rx*/
int tx_reg; /* current reg used for TX */
u8 saved_conf1; /* saved FEC0 reg */
- int learning_enabled; /* learning input enabled */
-
- /* RX sample handling */
- int rx_sample; /* current recieved sample */
- int rx_sample_pulse; /* recieved sample is pulse */
- int rx_idle; /* idle mode for RX activated */
- struct timeval rx_gap_start; /* time of start of idle */
- int rx_timeout; /* time in ms of RX timeout */
- int rx_send_timeout_packet; /* do we send RX timeout */
- int rx_timeout_sent; /* we sent the timeout packet */
- int rx_carrier_sense; /* sense carrier */
/* TX sample handling */
unsigned int tx_sample; /* current sample for TX */
- int tx_sample_pulse; /* current sample is pulse */
+ bool tx_sample_pulse; /* current sample is pulse */
/* TX buffer */
- int tx_buffer[ENE_TXBUF_SIZE]; /* input samples buffer*/
+ int *tx_buffer; /* input samples buffer*/
int tx_pos; /* position in that bufer */
int tx_len; /* current len of tx buffer */
- int tx_underway; /* TX is under way*/
int tx_done; /* done transmitting */
/* one more sample pending*/
struct completion tx_complete; /* TX completion */
struct timer_list tx_sim_timer;
- /*TX settings */
+ /* TX settings */
int tx_period;
int tx_duty_cycle;
int transmitter_mask;
+
+ /* RX settings */
+ bool learning_enabled; /* learning input enabled */
+ bool carrier_detect_enabled; /* carrier detect enabled */
+ int rx_period_adjust;
};
--
GitLab
From df49d113d16b18070b3d51832f3a02145eeb354b Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sat, 31 Jul 2010 14:23:04 -0300
Subject: [PATCH 481/863] V4L/DVB: IR keymap: Add print button for HP OEM
version of MCE remote
This patch adds a defintion for the "Print" button found on HP OEM
versions of the MCE remote. All of the other keys found on the HP OEM
version of the remote match the other keys as already defined.
Because, who doesn't need "remote printing", while one is sitting on the
couch across from one's PC? ;)
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/keymaps/rc-rc6-mce.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/IR/keymaps/rc-rc6-mce.c b/drivers/media/IR/keymaps/rc-rc6-mce.c
index c6726a8039be6..64264f7f838f2 100644
--- a/drivers/media/IR/keymaps/rc-rc6-mce.c
+++ b/drivers/media/IR/keymaps/rc-rc6-mce.c
@@ -74,6 +74,8 @@ static struct ir_scancode rc6_mce[] = {
{ 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
{ 0x800f044d, KEY_TITLE },
+ { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */
+
{ 0x800f040c, KEY_POWER },
{ 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
--
GitLab
From 9bde9f263e958b0d588aada03854fcc0f0c88b86 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Thu, 17 Jun 2010 06:52:37 -0300
Subject: [PATCH 482/863] V4L/DVB: uvcvideo: Drop corrupted compressed frames
Corrupted video frames are dropped by default by the driver for
uncompressed formats. Data corruption is not less problematic for
compressed formats, so frame drop should be enabled by default for those
formats as well.
Mark buffers as faulty when an isochronous packet loss is detected for
any format, or when the buffer length doesn't match the image size for
uncompressed formats. Drop erroneous buffers regardless of whether the
format is compressed or uncompressed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/uvc/uvc_queue.c | 13 +++++++++----
drivers/media/video/uvc/uvc_video.c | 19 +++++++++++--------
drivers/media/video/uvc/uvcvideo.h | 5 +++--
3 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index 133c78d113ac2..e9928a415086e 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -78,12 +78,14 @@
*
*/
-void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
+void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type,
+ int drop_corrupted)
{
mutex_init(&queue->mutex);
spin_lock_init(&queue->irqlock);
INIT_LIST_HEAD(&queue->mainqueue);
INIT_LIST_HEAD(&queue->irqqueue);
+ queue->flags = drop_corrupted ? UVC_QUEUE_DROP_CORRUPTED : 0;
queue->type = type;
}
@@ -435,8 +437,10 @@ int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
uvc_queue_cancel(queue, 0);
INIT_LIST_HEAD(&queue->mainqueue);
- for (i = 0; i < queue->count; ++i)
+ for (i = 0; i < queue->count; ++i) {
+ queue->buffer[i].error = 0;
queue->buffer[i].state = UVC_BUF_STATE_IDLE;
+ }
queue->flags &= ~UVC_QUEUE_STREAMING;
}
@@ -488,8 +492,8 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
struct uvc_buffer *nextbuf;
unsigned long flags;
- if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
- buf->buf.length != buf->buf.bytesused) {
+ if ((queue->flags & UVC_QUEUE_DROP_CORRUPTED) && buf->error) {
+ buf->error = 0;
buf->state = UVC_BUF_STATE_QUEUED;
buf->buf.bytesused = 0;
return buf;
@@ -497,6 +501,7 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
spin_lock_irqsave(&queue->irqlock, flags);
list_del(&buf->queue);
+ buf->error = 0;
buf->state = UVC_BUF_STATE_DONE;
if (!list_empty(&queue->irqqueue))
nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 53f3ef4635eb3..e27cf0d3b6d90 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -555,6 +555,9 @@ static void uvc_video_decode_isoc(struct urb *urb, struct uvc_streaming *stream,
if (urb->iso_frame_desc[i].status < 0) {
uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame "
"lost (%d).\n", urb->iso_frame_desc[i].status);
+ /* Mark the buffer as faulty. */
+ if (buf != NULL)
+ buf->error = 1;
continue;
}
@@ -579,8 +582,14 @@ static void uvc_video_decode_isoc(struct urb *urb, struct uvc_streaming *stream,
uvc_video_decode_end(stream, buf, mem,
urb->iso_frame_desc[i].actual_length);
- if (buf->state == UVC_BUF_STATE_READY)
+ if (buf->state == UVC_BUF_STATE_READY) {
+ if (buf->buf.length != buf->buf.bytesused &&
+ !(stream->cur_format->flags &
+ UVC_FMT_FLAG_COMPRESSED))
+ buf->error = 1;
+
buf = uvc_queue_next_buffer(&stream->queue, buf);
+ }
}
}
@@ -1104,7 +1113,7 @@ int uvc_video_init(struct uvc_streaming *stream)
atomic_set(&stream->active, 0);
/* Initialize the video buffers queue. */
- uvc_queue_init(&stream->queue, stream->type);
+ uvc_queue_init(&stream->queue, stream->type, !uvc_no_drop_param);
/* Alternate setting 0 should be the default, yet the XBox Live Vision
* Cam (and possibly other devices) crash or otherwise misbehave if
@@ -1197,12 +1206,6 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable)
return 0;
}
- if ((stream->cur_format->flags & UVC_FMT_FLAG_COMPRESSED) ||
- uvc_no_drop_param)
- stream->queue.flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
- else
- stream->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE;
-
ret = uvc_queue_enable(&stream->queue, 1);
if (ret < 0)
return ret;
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index ac272456fbfdf..bdacf3beabf54 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -379,11 +379,12 @@ struct uvc_buffer {
struct list_head queue;
wait_queue_head_t wait;
enum uvc_buffer_state state;
+ unsigned int error;
};
#define UVC_QUEUE_STREAMING (1 << 0)
#define UVC_QUEUE_DISCONNECTED (1 << 1)
-#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2)
+#define UVC_QUEUE_DROP_CORRUPTED (1 << 2)
struct uvc_video_queue {
enum v4l2_buf_type type;
@@ -562,7 +563,7 @@ extern struct uvc_driver uvc_driver;
/* Video buffers queue management. */
extern void uvc_queue_init(struct uvc_video_queue *queue,
- enum v4l2_buf_type type);
+ enum v4l2_buf_type type, int drop_corrupted);
extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
unsigned int nbuffers, unsigned int buflength);
extern int uvc_free_buffers(struct uvc_video_queue *queue);
--
GitLab
From 70092c26dcfcdcc463e157c103ec4c9d2d49de67 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 3 Aug 2010 11:18:01 -0300
Subject: [PATCH 483/863] V4L/DVB: uvcvideo: Add support for Miricle 307K
thermal webcam
The camera requires the STREAM_NO_FID quirk. Add a corresponding entry
in the device IDs list.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/uvc/uvc_driver.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 7eaf99b22a48d..8bdd940f32e68 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -2145,6 +2145,15 @@ static struct usb_device_id uvc_ids[] = {
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_STREAM_NO_FID },
+ /* Miricle 307K */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x17dc,
+ .idProduct = 0x0202,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
/* Lenovo Thinkpad SL400/SL500 */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
--
GitLab
From 5fd8f7388c9a8601c2dbe0da458df602fe427e83 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Tue, 3 Aug 2010 09:50:29 -0300
Subject: [PATCH 484/863] V4L/DVB: v4l: Add driver for Samsung S5P SoC video
postprocessor
This driver exports a video device node per each camera interface/
video postprocessor (FIMC) device contained in Samsung S5P SoC series.
The driver is based on v4l2-mem2mem framework.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
.../DocBook/v4l/pixfmt-packed-rgb.xml | 78 +
drivers/media/video/Kconfig | 9 +
drivers/media/video/Makefile | 1 +
drivers/media/video/s5p-fimc/Makefile | 3 +
drivers/media/video/s5p-fimc/fimc-core.c | 1570 +++++++++++++++++
drivers/media/video/s5p-fimc/fimc-core.h | 465 +++++
drivers/media/video/s5p-fimc/fimc-reg.c | 527 ++++++
drivers/media/video/s5p-fimc/regs-fimc.h | 293 +++
include/linux/videodev2.h | 1 +
9 files changed, 2947 insertions(+)
create mode 100644 drivers/media/video/s5p-fimc/Makefile
create mode 100644 drivers/media/video/s5p-fimc/fimc-core.c
create mode 100644 drivers/media/video/s5p-fimc/fimc-core.h
create mode 100644 drivers/media/video/s5p-fimc/fimc-reg.c
create mode 100644 drivers/media/video/s5p-fimc/regs-fimc.h
diff --git a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
index d2dd697a81d8d..26e8792310882 100644
--- a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
+++ b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
@@ -240,6 +240,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
<entry>r<subscript>1</subscript></entry>
<entry>r<subscript>0</subscript></entry>
</row>
+ <row id="V4L2-PIX-FMT-BGR666">
+ <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+ <entry>'BGRH'</entry>
+ <entry></entry>
+ <entry>b<subscript>5</subscript></entry>
+ <entry>b<subscript>4</subscript></entry>
+ <entry>b<subscript>3</subscript></entry>
+ <entry>b<subscript>2</subscript></entry>
+ <entry>b<subscript>1</subscript></entry>
+ <entry>b<subscript>0</subscript></entry>
+ <entry>g<subscript>5</subscript></entry>
+ <entry>g<subscript>4</subscript></entry>
+ <entry></entry>
+ <entry>g<subscript>3</subscript></entry>
+ <entry>g<subscript>2</subscript></entry>
+ <entry>g<subscript>1</subscript></entry>
+ <entry>g<subscript>0</subscript></entry>
+ <entry>r<subscript>5</subscript></entry>
+ <entry>r<subscript>4</subscript></entry>
+ <entry>r<subscript>3</subscript></entry>
+ <entry>r<subscript>2</subscript></entry>
+ <entry></entry>
+ <entry>r<subscript>1</subscript></entry>
+ <entry>r<subscript>0</subscript></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ </row>
<row id="V4L2-PIX-FMT-BGR24">
<entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
<entry>'BGR3'</entry>
@@ -700,6 +739,45 @@ defined in error. Drivers may interpret them as in <xref
<entry>b<subscript>1</subscript></entry>
<entry>b<subscript>0</subscript></entry>
</row>
+ <row id="V4L2-PIX-FMT-BGR666">
+ <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+ <entry>'BGRH'</entry>
+ <entry></entry>
+ <entry>b<subscript>5</subscript></entry>
+ <entry>b<subscript>4</subscript></entry>
+ <entry>b<subscript>3</subscript></entry>
+ <entry>b<subscript>2</subscript></entry>
+ <entry>b<subscript>1</subscript></entry>
+ <entry>b<subscript>0</subscript></entry>
+ <entry>g<subscript>5</subscript></entry>
+ <entry>g<subscript>4</subscript></entry>
+ <entry></entry>
+ <entry>g<subscript>3</subscript></entry>
+ <entry>g<subscript>2</subscript></entry>
+ <entry>g<subscript>1</subscript></entry>
+ <entry>g<subscript>0</subscript></entry>
+ <entry>r<subscript>5</subscript></entry>
+ <entry>r<subscript>4</subscript></entry>
+ <entry>r<subscript>3</subscript></entry>
+ <entry>r<subscript>2</subscript></entry>
+ <entry></entry>
+ <entry>r<subscript>1</subscript></entry>
+ <entry>r<subscript>0</subscript></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ </row>
<row><!-- id="V4L2-PIX-FMT-BGR24" -->
<entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
<entry>'BGR3'</entry>
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 2e15903b976d7..c70b67deb9b22 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1016,4 +1016,13 @@ config VIDEO_MEM2MEM_TESTDEV
This is a virtual test device for the memory-to-memory driver
framework.
+config VIDEO_SAMSUNG_S5P_FIMC
+ tristate "Samsung S5P FIMC (video postprocessor) driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+ select VIDEOBUF_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ help
+ This is a v4l2 driver for the S5P camera interface
+ (video postprocessor)
+
endif # V4L_MEM2MEM_DRIVERS
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 1051ecc602e74..c76fef390797e 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -163,6 +163,7 @@ obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/
obj-$(CONFIG_ARCH_DAVINCI) += davinci/
diff --git a/drivers/media/video/s5p-fimc/Makefile b/drivers/media/video/s5p-fimc/Makefile
new file mode 100644
index 0000000000000..0d9d54132eccb
--- /dev/null
+++ b/drivers/media/video/s5p-fimc/Makefile
@@ -0,0 +1,3 @@
+
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) := s5p-fimc.o
+s5p-fimc-y := fimc-core.o fimc-reg.o
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
new file mode 100644
index 0000000000000..6558a2ea9ffd2
--- /dev/null
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -0,0 +1,1570 @@
+/*
+ * S5P camera interface (video postprocessor) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation, either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/bug.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf-dma-contig.h>
+
+#include "fimc-core.h"
+
+static char *fimc_clock_name[NUM_FIMC_CLOCKS] = { "sclk_fimc", "fimc" };
+
+static struct fimc_fmt fimc_formats[] = {
+ {
+ .name = "RGB565",
+ .fourcc = V4L2_PIX_FMT_RGB565X,
+ .depth = 16,
+ .color = S5P_FIMC_RGB565,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "BGR666",
+ .fourcc = V4L2_PIX_FMT_BGR666,
+ .depth = 32,
+ .color = S5P_FIMC_RGB666,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "XRGB-8-8-8-8, 24 bpp",
+ .fourcc = V4L2_PIX_FMT_RGB24,
+ .depth = 32,
+ .color = S5P_FIMC_RGB888,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 packed, YCbYCr",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .depth = 16,
+ .color = S5P_FIMC_YCBYCR422,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 packed, CbYCrY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ .color = S5P_FIMC_CBYCRY422,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 packed, CrYCbY",
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .depth = 16,
+ .color = S5P_FIMC_CRYCBY422,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 packed, YCrYCb",
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .depth = 16,
+ .color = S5P_FIMC_YCRYCB422,
+ .buff_cnt = 1,
+ .planes_cnt = 1
+ }, {
+ .name = "YUV 4:2:2 planar, Y/Cb/Cr",
+ .fourcc = V4L2_PIX_FMT_YUV422P,
+ .depth = 12,
+ .color = S5P_FIMC_YCBCR422,
+ .buff_cnt = 1,
+ .planes_cnt = 3
+ }, {
+ .name = "YUV 4:2:2 planar, Y/CbCr",
+ .fourcc = V4L2_PIX_FMT_NV16,
+ .depth = 16,
+ .color = S5P_FIMC_YCBCR422,
+ .buff_cnt = 1,
+ .planes_cnt = 2
+ }, {
+ .name = "YUV 4:2:2 planar, Y/CrCb",
+ .fourcc = V4L2_PIX_FMT_NV61,
+ .depth = 16,
+ .color = S5P_FIMC_RGB565,
+ .buff_cnt = 1,
+ .planes_cnt = 2
+ }, {
+ .name = "YUV 4:2:0 planar, YCbCr",
+ .fourcc = V4L2_PIX_FMT_YUV420,
+ .depth = 12,
+ .color = S5P_FIMC_YCBCR420,
+ .buff_cnt = 1,
+ .planes_cnt = 3
+ }, {
+ .name = "YUV 4:2:0 planar, Y/CbCr",
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .depth = 12,
+ .color = S5P_FIMC_YCBCR420,
+ .buff_cnt = 1,
+ .planes_cnt = 2
+ }
+ };
+
+static struct v4l2_queryctrl fimc_ctrls[] = {
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Horizontal flip",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 0,
+ },
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vertical flip",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 0,
+ },
+ {
+ .id = V4L2_CID_ROTATE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Rotation (CCW)",
+ .minimum = 0,
+ .maximum = 270,
+ .step = 90,
+ .default_value = 0,
+ },
+};
+
+
+static struct v4l2_queryctrl *get_ctrl(int id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fimc_ctrls); ++i)
+ if (id == fimc_ctrls[i].id)
+ return &fimc_ctrls[i];
+ return NULL;
+}
+
+static int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f)
+{
+ if (r->width > f->width) {
+ if (f->width > (r->width * SCALER_MAX_HRATIO))
+ return -EINVAL;
+ } else {
+ if ((f->width * SCALER_MAX_HRATIO) < r->width)
+ return -EINVAL;
+ }
+
+ if (r->height > f->height) {
+ if (f->height > (r->height * SCALER_MAX_VRATIO))
+ return -EINVAL;
+ } else {
+ if ((f->height * SCALER_MAX_VRATIO) < r->height)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift)
+{
+ if (src >= tar * 64) {
+ return -EINVAL;
+ } else if (src >= tar * 32) {
+ *ratio = 32;
+ *shift = 5;
+ } else if (src >= tar * 16) {
+ *ratio = 16;
+ *shift = 4;
+ } else if (src >= tar * 8) {
+ *ratio = 8;
+ *shift = 3;
+ } else if (src >= tar * 4) {
+ *ratio = 4;
+ *shift = 2;
+ } else if (src >= tar * 2) {
+ *ratio = 2;
+ *shift = 1;
+ } else {
+ *ratio = 1;
+ *shift = 0;
+ }
+
+ return 0;
+}
+
+static int fimc_set_scaler_info(struct fimc_ctx *ctx)
+{
+ struct fimc_scaler *sc = &ctx->scaler;
+ struct fimc_frame *s_frame = &ctx->s_frame;
+ struct fimc_frame *d_frame = &ctx->d_frame;
+ int tx, ty, sx, sy;
+ int ret;
+
+ tx = d_frame->width;
+ ty = d_frame->height;
+ if (tx <= 0 || ty <= 0) {
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ "invalid target size: %d x %d", tx, ty);
+ return -EINVAL;
+ }
+
+ sx = s_frame->width;
+ sy = s_frame->height;
+ if (sx <= 0 || sy <= 0) {
+ err("invalid source size: %d x %d", sx, sy);
+ return -EINVAL;
+ }
+
+ sc->real_width = sx;
+ sc->real_height = sy;
+ dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty);
+
+ ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor);
+ if (ret)
+ return ret;
+
+ ret = fimc_get_scaler_factor(sy, ty, &sc->pre_vratio, &sc->vfactor);
+ if (ret)
+ return ret;
+
+ sc->pre_dst_width = sx / sc->pre_hratio;
+ sc->pre_dst_height = sy / sc->pre_vratio;
+
+ sc->main_hratio = (sx << 8) / (tx << sc->hfactor);
+ sc->main_vratio = (sy << 8) / (ty << sc->vfactor);
+
+ sc->scaleup_h = (tx >= sx) ? 1 : 0;
+ sc->scaleup_v = (ty >= sy) ? 1 : 0;
+
+ /* check to see if input and output size/format differ */
+ if (s_frame->fmt->color == d_frame->fmt->color
+ && s_frame->width == d_frame->width
+ && s_frame->height == d_frame->height)
+ sc->copy_mode = 1;
+ else
+ sc->copy_mode = 0;
+
+ return 0;
+}
+
+
+static irqreturn_t fimc_isr(int irq, void *priv)
+{
+ struct fimc_vid_buffer *src_buf, *dst_buf;
+ struct fimc_dev *fimc = (struct fimc_dev *)priv;
+ struct fimc_ctx *ctx;
+
+ BUG_ON(!fimc);
+ fimc_hw_clear_irq(fimc);
+
+ spin_lock(&fimc->slock);
+
+ if (test_and_clear_bit(ST_M2M_PEND, &fimc->state)) {
+ ctx = v4l2_m2m_get_curr_priv(fimc->m2m.m2m_dev);
+ if (!ctx || !ctx->m2m_ctx)
+ goto isr_unlock;
+ src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
+ if (src_buf && dst_buf) {
+ spin_lock(&fimc->irqlock);
+ src_buf->vb.state = dst_buf->vb.state = VIDEOBUF_DONE;
+ wake_up(&src_buf->vb.done);
+ wake_up(&dst_buf->vb.done);
+ spin_unlock(&fimc->irqlock);
+ v4l2_m2m_job_finish(fimc->m2m.m2m_dev, ctx->m2m_ctx);
+ }
+ }
+
+isr_unlock:
+ spin_unlock(&fimc->slock);
+ return IRQ_HANDLED;
+}
+
+/* The color format (planes_cnt, buff_cnt) must be already configured. */
+static int fimc_prepare_addr(struct fimc_ctx *ctx,
+ struct fimc_vid_buffer *buf, enum v4l2_buf_type type)
+{
+ struct fimc_frame *frame;
+ struct fimc_addr *paddr;
+ u32 pix_size;
+ int ret = 0;
+
+ ctx_m2m_get_frame(frame, ctx, type);
+ paddr = &frame->paddr;
+
+ if (!buf)
+ return -EINVAL;
+
+ pix_size = frame->width * frame->height;
+
+ dbg("buff_cnt= %d, planes_cnt= %d, frame->size= %d, pix_size= %d",
+ frame->fmt->buff_cnt, frame->fmt->planes_cnt,
+ frame->size, pix_size);
+
+ if (frame->fmt->buff_cnt == 1) {
+ paddr->y = videobuf_to_dma_contig(&buf->vb);
+ switch (frame->fmt->planes_cnt) {
+ case 1:
+ paddr->cb = 0;
+ paddr->cr = 0;
+ break;
+ case 2:
+ /* decompose Y into Y/Cb */
+ paddr->cb = (u32)(paddr->y + pix_size);
+ paddr->cr = 0;
+ break;
+ case 3:
+ paddr->cb = (u32)(paddr->y + pix_size);
+ /* decompose Y into Y/Cb/Cr */
+ if (S5P_FIMC_YCBCR420 == frame->fmt->color)
+ paddr->cr = (u32)(paddr->cb
+ + (pix_size >> 2));
+ else /* 422 */
+ paddr->cr = (u32)(paddr->cb
+ + (pix_size >> 1));
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ dbg("PHYS_ADDR: type= %d, y= 0x%X cb= 0x%X cr= 0x%X ret= %d",
+ type, paddr->y, paddr->cb, paddr->cr, ret);
+
+ return ret;
+}
+
+/* Set order for 1 and 2 plane YCBCR 4:2:2 formats. */
+static void fimc_set_yuv_order(struct fimc_ctx *ctx)
+{
+ /* The one only mode supported in SoC. */
+ ctx->in_order_2p = S5P_FIMC_LSB_CRCB;
+ ctx->out_order_2p = S5P_FIMC_LSB_CRCB;
+
+ /* Set order for 1 plane input formats. */
+ switch (ctx->s_frame.fmt->color) {
+ case S5P_FIMC_YCRYCB422:
+ ctx->in_order_1p = S5P_FIMC_IN_YCRYCB;
+ break;
+ case S5P_FIMC_CBYCRY422:
+ ctx->in_order_1p = S5P_FIMC_IN_CBYCRY;
+ break;
+ case S5P_FIMC_CRYCBY422:
+ ctx->in_order_1p = S5P_FIMC_IN_CRYCBY;
+ break;
+ case S5P_FIMC_YCBYCR422:
+ default:
+ ctx->in_order_1p = S5P_FIMC_IN_YCBYCR;
+ break;
+ }
+ dbg("ctx->in_order_1p= %d", ctx->in_order_1p);
+
+ switch (ctx->d_frame.fmt->color) {
+ case S5P_FIMC_YCRYCB422:
+ ctx->out_order_1p = S5P_FIMC_OUT_YCRYCB;
+ break;
+ case S5P_FIMC_CBYCRY422:
+ ctx->out_order_1p = S5P_FIMC_OUT_CBYCRY;
+ break;
+ case S5P_FIMC_CRYCBY422:
+ ctx->out_order_1p = S5P_FIMC_OUT_CRYCBY;
+ break;
+ case S5P_FIMC_YCBYCR422:
+ default:
+ ctx->out_order_1p = S5P_FIMC_OUT_YCBYCR;
+ break;
+ }
+ dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
+}
+
+/**
+ * fimc_prepare_config - check dimensions, operation and color mode
+ * and pre-calculate offset and the scaling coefficients.
+ *
+ * @ctx: hardware context information
+ * @flags: flags indicating which parameters to check/update
+ *
+ * Return: 0 if dimensions are valid or non zero otherwise.
+ */
+static int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags)
+{
+ struct fimc_frame *s_frame, *d_frame;
+ struct fimc_vid_buffer *buf = NULL;
+ struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+ int ret = 0;
+
+ s_frame = &ctx->s_frame;
+ d_frame = &ctx->d_frame;
+
+ if (flags & FIMC_PARAMS) {
+ if ((ctx->out_path == FIMC_DMA) &&
+ (ctx->rotation == 90 || ctx->rotation == 270)) {
+ swap(d_frame->f_width, d_frame->f_height);
+ swap(d_frame->width, d_frame->height);
+ }
+
+ /* Prepare the output offset ratios for scaler. */
+ d_frame->dma_offset.y_h = d_frame->offs_h;
+ if (!variant->pix_hoff)
+ d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3);
+
+ d_frame->dma_offset.y_v = d_frame->offs_v;
+
+ d_frame->dma_offset.cb_h = d_frame->offs_h;
+ d_frame->dma_offset.cb_v = d_frame->offs_v;
+
+ d_frame->dma_offset.cr_h = d_frame->offs_h;
+ d_frame->dma_offset.cr_v = d_frame->offs_v;
+
+ if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) {
+ d_frame->dma_offset.cb_h >>= 1;
+ d_frame->dma_offset.cb_v >>= 1;
+ d_frame->dma_offset.cr_h >>= 1;
+ d_frame->dma_offset.cr_v >>= 1;
+ }
+
+ dbg("out offset: color= %d, y_h= %d, y_v= %d",
+ d_frame->fmt->color,
+ d_frame->dma_offset.y_h, d_frame->dma_offset.y_v);
+
+ /* Prepare the input offset ratios for scaler. */
+ s_frame->dma_offset.y_h = s_frame->offs_h;
+ if (!variant->pix_hoff)
+ s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3);
+ s_frame->dma_offset.y_v = s_frame->offs_v;
+
+ s_frame->dma_offset.cb_h = s_frame->offs_h;
+ s_frame->dma_offset.cb_v = s_frame->offs_v;
+
+ s_frame->dma_offset.cr_h = s_frame->offs_h;
+ s_frame->dma_offset.cr_v = s_frame->offs_v;
+
+ if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) {
+ s_frame->dma_offset.cb_h >>= 1;
+ s_frame->dma_offset.cb_v >>= 1;
+ s_frame->dma_offset.cr_h >>= 1;
+ s_frame->dma_offset.cr_v >>= 1;
+ }
+
+ dbg("in offset: color= %d, y_h= %d, y_v= %d",
+ s_frame->fmt->color, s_frame->dma_offset.y_h,
+ s_frame->dma_offset.y_v);
+
+ fimc_set_yuv_order(ctx);
+
+ /* Check against the scaler ratio. */
+ if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) ||
+ s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) {
+ err("out of scaler range");
+ return -EINVAL;
+ }
+ }
+
+ /* Input DMA mode is not allowed when the scaler is disabled. */
+ ctx->scaler.enabled = 1;
+
+ if (flags & FIMC_SRC_ADDR) {
+ buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
+ ret = fimc_prepare_addr(ctx, buf,
+ V4L2_BUF_TYPE_VIDEO_OUTPUT);
+ if (ret)
+ return ret;
+ }
+
+ if (flags & FIMC_DST_ADDR) {
+ buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
+ ret = fimc_prepare_addr(ctx, buf,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE);
+ }
+
+ return ret;
+}
+
+static void fimc_dma_run(void *priv)
+{
+ struct fimc_ctx *ctx = priv;
+ struct fimc_dev *fimc;
+ unsigned long flags;
+ u32 ret;
+
+ if (WARN(!ctx, "null hardware context"))
+ return;
+
+ fimc = ctx->fimc_dev;
+
+ spin_lock_irqsave(&ctx->slock, flags);
+ set_bit(ST_M2M_PEND, &fimc->state);
+
+ ctx->state |= (FIMC_SRC_ADDR | FIMC_DST_ADDR);
+ ret = fimc_prepare_config(ctx, ctx->state);
+ if (ret) {
+ err("general configuration error");
+ goto dma_unlock;
+ }
+
+ if (fimc->m2m.ctx != ctx)
+ ctx->state |= FIMC_PARAMS;
+
+ fimc_hw_set_input_addr(fimc, &ctx->s_frame.paddr);
+
+ if (ctx->state & FIMC_PARAMS) {
+ fimc_hw_set_input_path(ctx);
+ fimc_hw_set_in_dma(ctx);
+ if (fimc_set_scaler_info(ctx)) {
+ err("scaler configuration error");
+ goto dma_unlock;
+ }
+ fimc_hw_set_prescaler(ctx);
+ fimc_hw_set_scaler(ctx);
+ fimc_hw_set_target_format(ctx);
+ fimc_hw_set_rotation(ctx);
+ fimc_hw_set_effect(ctx);
+ }
+
+ fimc_hw_set_output_path(ctx);
+ if (ctx->state & (FIMC_DST_ADDR | FIMC_PARAMS))
+ fimc_hw_set_output_addr(fimc, &ctx->d_frame.paddr);
+
+ if (ctx->state & FIMC_PARAMS)
+ fimc_hw_set_out_dma(ctx);
+
+ if (ctx->scaler.enabled)
+ fimc_hw_start_scaler(fimc);
+ fimc_hw_en_capture(ctx);
+
+ ctx->state = 0;
+ fimc_hw_start_in_dma(fimc);
+
+ fimc->m2m.ctx = ctx;
+
+dma_unlock:
+ spin_unlock_irqrestore(&ctx->slock, flags);
+}
+
+/* Nothing done in job_abort. */
+static void fimc_job_abort(void *priv) {}
+
+static void fimc_buf_release(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ videobuf_dma_contig_free(vq, vb);
+ vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int fimc_buf_setup(struct videobuf_queue *vq, unsigned int *count,
+ unsigned int *size)
+{
+ struct fimc_ctx *ctx = vq->priv_data;
+ struct fimc_frame *frame;
+
+ ctx_m2m_get_frame(frame, ctx, vq->type);
+
+ *size = (frame->width * frame->height * frame->fmt->depth) >> 3;
+ if (0 == *count)
+ *count = 1;
+ return 0;
+}
+
+static int fimc_buf_prepare(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb, enum v4l2_field field)
+{
+ struct fimc_ctx *ctx = vq->priv_data;
+ struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev;
+ struct fimc_frame *frame;
+ int ret;
+
+ ctx_m2m_get_frame(frame, ctx, vq->type);
+
+ if (vb->baddr) {
+ if (vb->bsize < frame->size) {
+ v4l2_err(v4l2_dev,
+ "User-provided buffer too small (%d < %d)\n",
+ vb->bsize, frame->size);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ } else if (vb->state != VIDEOBUF_NEEDS_INIT
+ && vb->bsize < frame->size) {
+ return -EINVAL;
+ }
+
+ vb->width = frame->width;
+ vb->height = frame->height;
+ vb->bytesperline = (frame->width * frame->fmt->depth) >> 3;
+ vb->size = frame->size;
+ vb->field = field;
+
+ if (VIDEOBUF_NEEDS_INIT == vb->state) {
+ ret = videobuf_iolock(vq, vb, NULL);
+ if (ret) {
+ v4l2_err(v4l2_dev, "Iolock failed\n");
+ fimc_buf_release(vq, vb);
+ return ret;
+ }
+ }
+ vb->state = VIDEOBUF_PREPARED;
+
+ return 0;
+}
+
+static void fimc_buf_queue(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct fimc_ctx *ctx = vq->priv_data;
+ v4l2_m2m_buf_queue(ctx->m2m_ctx, vq, vb);
+}
+
+struct videobuf_queue_ops fimc_qops = {
+ .buf_setup = fimc_buf_setup,
+ .buf_prepare = fimc_buf_prepare,
+ .buf_queue = fimc_buf_queue,
+ .buf_release = fimc_buf_release,
+};
+
+static int fimc_m2m_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+
+ strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
+ strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
+ cap->bus_info[0] = 0;
+ cap->version = KERNEL_VERSION(1, 0, 0);
+ cap->capabilities = V4L2_CAP_STREAMING |
+ V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT;
+
+ return 0;
+}
+
+static int fimc_m2m_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct fimc_fmt *fmt;
+
+ if (f->index >= ARRAY_SIZE(fimc_formats))
+ return -EINVAL;
+
+ fmt = &fimc_formats[f->index];
+ strncpy(f->description, fmt->name, sizeof(f->description) - 1);
+ f->pixelformat = fmt->fourcc;
+ return 0;
+}
+
+static int fimc_m2m_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct fimc_ctx *ctx = priv;
+ struct fimc_frame *frame;
+
+ ctx_m2m_get_frame(frame, ctx, f->type);
+
+ f->fmt.pix.width = frame->width;
+ f->fmt.pix.height = frame->height;
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ f->fmt.pix.pixelformat = frame->fmt->fourcc;
+
+ return 0;
+}
+
+static struct fimc_fmt *find_format(struct v4l2_format *f)
+{
+ struct fimc_fmt *fmt;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
+ fmt = &fimc_formats[i];
+ if (fmt->fourcc == f->fmt.pix.pixelformat)
+ break;
+ }
+ if (i == ARRAY_SIZE(fimc_formats))
+ return NULL;
+
+ return fmt;
+}
+
+static int fimc_m2m_try_fmt(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct fimc_fmt *fmt;
+ u32 max_width, max_height, mod_x, mod_y;
+ struct fimc_ctx *ctx = priv;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct samsung_fimc_variant *variant = fimc->variant;
+
+ fmt = find_format(f);
+ if (!fmt) {
+ v4l2_err(&fimc->m2m.v4l2_dev,
+ "Fourcc format (0x%X) invalid.\n", pix->pixelformat);
+ return -EINVAL;
+ }
+
+ if (pix->field == V4L2_FIELD_ANY)
+ pix->field = V4L2_FIELD_NONE;
+ else if (V4L2_FIELD_NONE != pix->field)
+ return -EINVAL;
+
+ if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+ max_width = variant->scaler_dis_w;
+ max_height = variant->scaler_dis_w;
+ mod_x = variant->min_inp_pixsize;
+ mod_y = variant->min_inp_pixsize;
+ } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+ max_width = variant->out_rot_dis_w;
+ max_height = variant->out_rot_dis_w;
+ mod_x = variant->min_out_pixsize;
+ mod_y = variant->min_out_pixsize;
+ } else {
+ err("Wrong stream type (%d)", f->type);
+ return -EINVAL;
+ }
+
+ dbg("max_w= %d, max_h= %d", max_width, max_height);
+
+ if (pix->height > max_height)
+ pix->height = max_height;
+ if (pix->width > max_width)
+ pix->width = max_width;
+
+ if (tiled_fmt(fmt)) {
+ mod_x = 64; /* 64x32 tile */
+ mod_y = 32;
+ }
+
+ dbg("mod_x= 0x%X, mod_y= 0x%X", mod_x, mod_y);
+
+ pix->width = (pix->width == 0) ? mod_x : ALIGN(pix->width, mod_x);
+ pix->height = (pix->height == 0) ? mod_y : ALIGN(pix->height, mod_y);
+
+ if (pix->bytesperline == 0 ||
+ pix->bytesperline * 8 / fmt->depth > pix->width)
+ pix->bytesperline = (pix->width * fmt->depth) >> 3;
+
+ if (pix->sizeimage == 0)
+ pix->sizeimage = pix->height * pix->bytesperline;
+
+ dbg("pix->bytesperline= %d, fmt->depth= %d",
+ pix->bytesperline, fmt->depth);
+
+ return 0;
+}
+
+
+static int fimc_m2m_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct fimc_ctx *ctx = priv;
+ struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev;
+ struct videobuf_queue *src_vq, *dst_vq;
+ struct fimc_frame *frame;
+ struct v4l2_pix_format *pix;
+ unsigned long flags;
+ int ret = 0;
+
+ BUG_ON(!ctx);
+
+ ret = fimc_m2m_try_fmt(file, priv, f);
+ if (ret)
+ return ret;
+
+ mutex_lock(&ctx->fimc_dev->lock);
+
+ src_vq = v4l2_m2m_get_src_vq(ctx->m2m_ctx);
+ dst_vq = v4l2_m2m_get_dst_vq(ctx->m2m_ctx);
+
+ mutex_lock(&src_vq->vb_lock);
+ mutex_lock(&dst_vq->vb_lock);
+
+ if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+ if (videobuf_queue_is_busy(src_vq)) {
+ v4l2_err(v4l2_dev, "%s queue busy\n", __func__);
+ ret = -EBUSY;
+ goto s_fmt_out;
+ }
+ frame = &ctx->s_frame;
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->state |= FIMC_SRC_FMT;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+
+ } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+ if (videobuf_queue_is_busy(dst_vq)) {
+ v4l2_err(v4l2_dev, "%s queue busy\n", __func__);
+ ret = -EBUSY;
+ goto s_fmt_out;
+ }
+ frame = &ctx->d_frame;
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->state |= FIMC_DST_FMT;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ } else {
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ "Wrong buffer/video queue type (%d)\n", f->type);
+ return -EINVAL;
+ }
+
+ pix = &f->fmt.pix;
+ frame->fmt = find_format(f);
+ if (!frame->fmt) {
+ ret = -EINVAL;
+ goto s_fmt_out;
+ }
+
+ frame->f_width = pix->bytesperline * 8 / frame->fmt->depth;
+ frame->f_height = pix->sizeimage/pix->bytesperline;
+ frame->width = pix->width;
+ frame->height = pix->height;
+ frame->o_width = pix->width;
+ frame->o_height = pix->height;
+ frame->offs_h = 0;
+ frame->offs_v = 0;
+ frame->size = (pix->width * pix->height * frame->fmt->depth) >> 3;
+ src_vq->field = dst_vq->field = pix->field;
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->state |= FIMC_PARAMS;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+
+ dbg("f_width= %d, f_height= %d", frame->f_width, frame->f_height);
+
+s_fmt_out:
+ mutex_unlock(&dst_vq->vb_lock);
+ mutex_unlock(&src_vq->vb_lock);
+ mutex_unlock(&ctx->fimc_dev->lock);
+ return ret;
+}
+
+static int fimc_m2m_reqbufs(struct file *file, void *priv,
+ struct v4l2_requestbuffers *reqbufs)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
+}
+
+static int fimc_m2m_querybuf(struct file *file, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_qbuf(struct file *file, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct fimc_ctx *ctx = priv;
+
+ return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_dqbuf(struct file *file, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int fimc_m2m_streamon(struct file *file, void *priv,
+ enum v4l2_buf_type type)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
+}
+
+static int fimc_m2m_streamoff(struct file *file, void *priv,
+ enum v4l2_buf_type type)
+{
+ struct fimc_ctx *ctx = priv;
+ return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type);
+}
+
+int fimc_m2m_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ struct v4l2_queryctrl *c;
+ c = get_ctrl(qc->id);
+ if (!c)
+ return -EINVAL;
+ *qc = *c;
+ return 0;
+}
+
+int fimc_m2m_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct fimc_ctx *ctx = priv;
+
+ switch (ctrl->id) {
+ case V4L2_CID_HFLIP:
+ ctrl->value = (FLIP_X_AXIS & ctx->flip) ? 1 : 0;
+ break;
+ case V4L2_CID_VFLIP:
+ ctrl->value = (FLIP_Y_AXIS & ctx->flip) ? 1 : 0;
+ break;
+ case V4L2_CID_ROTATE:
+ ctrl->value = ctx->rotation;
+ break;
+ default:
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, "Invalid control\n");
+ return -EINVAL;
+ }
+ dbg("ctrl->value= %d", ctrl->value);
+ return 0;
+}
+
+static int check_ctrl_val(struct fimc_ctx *ctx,
+ struct v4l2_control *ctrl)
+{
+ struct v4l2_queryctrl *c;
+ c = get_ctrl(ctrl->id);
+ if (!c)
+ return -EINVAL;
+
+ if (ctrl->value < c->minimum || ctrl->value > c->maximum
+ || (c->step != 0 && ctrl->value % c->step != 0)) {
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ "Invalid control value\n");
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
+int fimc_m2m_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct fimc_ctx *ctx = priv;
+ struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+ unsigned long flags;
+ int ret = 0;
+
+ ret = check_ctrl_val(ctx, ctrl);
+ if (ret)
+ return ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_HFLIP:
+ if (ctx->rotation != 0)
+ return 0;
+ if (ctrl->value)
+ ctx->flip |= FLIP_X_AXIS;
+ else
+ ctx->flip &= ~FLIP_X_AXIS;
+ break;
+
+ case V4L2_CID_VFLIP:
+ if (ctx->rotation != 0)
+ return 0;
+ if (ctrl->value)
+ ctx->flip |= FLIP_Y_AXIS;
+ else
+ ctx->flip &= ~FLIP_Y_AXIS;
+ break;
+
+ case V4L2_CID_ROTATE:
+ if (ctrl->value == 90 || ctrl->value == 270) {
+ if (ctx->out_path == FIMC_LCDFIFO &&
+ !variant->has_inp_rot) {
+ return -EINVAL;
+ } else if (ctx->in_path == FIMC_DMA &&
+ !variant->has_out_rot) {
+ return -EINVAL;
+ }
+ }
+ ctx->rotation = ctrl->value;
+ if (ctrl->value == 180)
+ ctx->flip = FLIP_XY_AXIS;
+ break;
+
+ default:
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, "Invalid control\n");
+ return -EINVAL;
+ }
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->state |= FIMC_PARAMS;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ return 0;
+}
+
+
+static int fimc_m2m_cropcap(struct file *file, void *fh,
+ struct v4l2_cropcap *cr)
+{
+ struct fimc_frame *frame;
+ struct fimc_ctx *ctx = fh;
+
+ ctx_m2m_get_frame(frame, ctx, cr->type);
+
+ cr->bounds.left = 0;
+ cr->bounds.top = 0;
+ cr->bounds.width = frame->f_width;
+ cr->bounds.height = frame->f_height;
+ cr->defrect.left = frame->offs_h;
+ cr->defrect.top = frame->offs_v;
+ cr->defrect.width = frame->o_width;
+ cr->defrect.height = frame->o_height;
+ return 0;
+}
+
+static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+{
+ struct fimc_frame *frame;
+ struct fimc_ctx *ctx = file->private_data;
+
+ ctx_m2m_get_frame(frame, ctx, cr->type);
+
+ cr->c.left = frame->offs_h;
+ cr->c.top = frame->offs_v;
+ cr->c.width = frame->width;
+ cr->c.height = frame->height;
+
+ return 0;
+}
+
+static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ unsigned long flags;
+ struct fimc_frame *f;
+ u32 min_size;
+ int ret = 0;
+
+ if (cr->c.top < 0 || cr->c.left < 0) {
+ v4l2_err(&fimc->m2m.v4l2_dev,
+ "doesn't support negative values for top & left\n");
+ return -EINVAL;
+ }
+
+ if (cr->c.width <= 0 || cr->c.height <= 0) {
+ v4l2_err(&fimc->m2m.v4l2_dev,
+ "crop width and height must be greater than 0\n");
+ return -EINVAL;
+ }
+
+ ctx_m2m_get_frame(f, ctx, cr->type);
+
+ /* Adjust to required pixel boundary. */
+ min_size = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ?
+ fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize;
+
+ cr->c.width = round_down(cr->c.width, min_size);
+ cr->c.height = round_down(cr->c.height, min_size);
+ cr->c.left = round_down(cr->c.left + 1, min_size);
+ cr->c.top = round_down(cr->c.top + 1, min_size);
+
+ if ((cr->c.left + cr->c.width > f->o_width)
+ || (cr->c.top + cr->c.height > f->o_height)) {
+ v4l2_err(&fimc->m2m.v4l2_dev, "Error in S_CROP params\n");
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&ctx->slock, flags);
+ if ((ctx->state & FIMC_SRC_FMT) && (ctx->state & FIMC_DST_FMT)) {
+ /* Check for the pixel scaling ratio when cropping input img. */
+ if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+ ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame);
+ else if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ ret = fimc_check_scaler_ratio(&cr->c, &ctx->s_frame);
+
+ if (ret) {
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range");
+ return -EINVAL;
+ }
+ }
+ ctx->state |= FIMC_PARAMS;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+
+ f->offs_h = cr->c.left;
+ f->offs_v = cr->c.top;
+ f->width = cr->c.width;
+ f->height = cr->c.height;
+ return 0;
+}
+
+static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = {
+ .vidioc_querycap = fimc_m2m_querycap,
+
+ .vidioc_enum_fmt_vid_cap = fimc_m2m_enum_fmt,
+ .vidioc_enum_fmt_vid_out = fimc_m2m_enum_fmt,
+
+ .vidioc_g_fmt_vid_cap = fimc_m2m_g_fmt,
+ .vidioc_g_fmt_vid_out = fimc_m2m_g_fmt,
+
+ .vidioc_try_fmt_vid_cap = fimc_m2m_try_fmt,
+ .vidioc_try_fmt_vid_out = fimc_m2m_try_fmt,
+
+ .vidioc_s_fmt_vid_cap = fimc_m2m_s_fmt,
+ .vidioc_s_fmt_vid_out = fimc_m2m_s_fmt,
+
+ .vidioc_reqbufs = fimc_m2m_reqbufs,
+ .vidioc_querybuf = fimc_m2m_querybuf,
+
+ .vidioc_qbuf = fimc_m2m_qbuf,
+ .vidioc_dqbuf = fimc_m2m_dqbuf,
+
+ .vidioc_streamon = fimc_m2m_streamon,
+ .vidioc_streamoff = fimc_m2m_streamoff,
+
+ .vidioc_queryctrl = fimc_m2m_queryctrl,
+ .vidioc_g_ctrl = fimc_m2m_g_ctrl,
+ .vidioc_s_ctrl = fimc_m2m_s_ctrl,
+
+ .vidioc_g_crop = fimc_m2m_g_crop,
+ .vidioc_s_crop = fimc_m2m_s_crop,
+ .vidioc_cropcap = fimc_m2m_cropcap
+
+};
+
+static void queue_init(void *priv, struct videobuf_queue *vq,
+ enum v4l2_buf_type type)
+{
+ struct fimc_ctx *ctx = priv;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+
+ videobuf_queue_dma_contig_init(vq, &fimc_qops,
+ fimc->m2m.v4l2_dev.dev,
+ &fimc->irqlock, type, V4L2_FIELD_NONE,
+ sizeof(struct fimc_vid_buffer), priv);
+}
+
+static int fimc_m2m_open(struct file *file)
+{
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct fimc_ctx *ctx = NULL;
+ int err = 0;
+
+ mutex_lock(&fimc->lock);
+ fimc->m2m.refcnt++;
+ set_bit(ST_OUTDMA_RUN, &fimc->state);
+ mutex_unlock(&fimc->lock);
+
+
+ ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ file->private_data = ctx;
+ ctx->fimc_dev = fimc;
+ /* default format */
+ ctx->s_frame.fmt = &fimc_formats[0];
+ ctx->d_frame.fmt = &fimc_formats[0];
+ /* per user process device context initialization */
+ ctx->state = 0;
+ ctx->flags = 0;
+ ctx->effect.type = S5P_FIMC_EFFECT_ORIGINAL;
+ ctx->in_path = FIMC_DMA;
+ ctx->out_path = FIMC_DMA;
+ spin_lock_init(&ctx->slock);
+
+ ctx->m2m_ctx = v4l2_m2m_ctx_init(ctx, fimc->m2m.m2m_dev, queue_init);
+ if (IS_ERR(ctx->m2m_ctx)) {
+ err = PTR_ERR(ctx->m2m_ctx);
+ kfree(ctx);
+ }
+ return err;
+}
+
+static int fimc_m2m_release(struct file *file)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+
+ v4l2_m2m_ctx_release(ctx->m2m_ctx);
+ kfree(ctx);
+ mutex_lock(&fimc->lock);
+ if (--fimc->m2m.refcnt <= 0)
+ clear_bit(ST_OUTDMA_RUN, &fimc->state);
+ mutex_unlock(&fimc->lock);
+ return 0;
+}
+
+static unsigned int fimc_m2m_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ return v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
+}
+
+
+static int fimc_m2m_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct fimc_ctx *ctx = file->private_data;
+ return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
+}
+
+static const struct v4l2_file_operations fimc_m2m_fops = {
+ .owner = THIS_MODULE,
+ .open = fimc_m2m_open,
+ .release = fimc_m2m_release,
+ .poll = fimc_m2m_poll,
+ .ioctl = video_ioctl2,
+ .mmap = fimc_m2m_mmap,
+};
+
+static struct v4l2_m2m_ops m2m_ops = {
+ .device_run = fimc_dma_run,
+ .job_abort = fimc_job_abort,
+};
+
+
+static int fimc_register_m2m_device(struct fimc_dev *fimc)
+{
+ struct video_device *vfd;
+ struct platform_device *pdev;
+ struct v4l2_device *v4l2_dev;
+ int ret = 0;
+
+ if (!fimc)
+ return -ENODEV;
+
+ pdev = fimc->pdev;
+ v4l2_dev = &fimc->m2m.v4l2_dev;
+
+ /* set name if it is empty */
+ if (!v4l2_dev->name[0])
+ snprintf(v4l2_dev->name, sizeof(v4l2_dev->name),
+ "%s.m2m", dev_name(&pdev->dev));
+
+ ret = v4l2_device_register(&pdev->dev, v4l2_dev);
+ if (ret)
+ return ret;;
+
+ vfd = video_device_alloc();
+ if (!vfd) {
+ v4l2_err(v4l2_dev, "Failed to allocate video device\n");
+ goto err_m2m_r1;
+ }
+
+ vfd->fops = &fimc_m2m_fops;
+ vfd->ioctl_ops = &fimc_m2m_ioctl_ops;
+ vfd->minor = -1;
+ vfd->release = video_device_release;
+
+ snprintf(vfd->name, sizeof(vfd->name), "%s:m2m", dev_name(&pdev->dev));
+
+ video_set_drvdata(vfd, fimc);
+ platform_set_drvdata(pdev, fimc);
+
+ fimc->m2m.vfd = vfd;
+ fimc->m2m.m2m_dev = v4l2_m2m_init(&m2m_ops);
+ if (IS_ERR(fimc->m2m.m2m_dev)) {
+ v4l2_err(v4l2_dev, "failed to initialize v4l2-m2m device\n");
+ ret = PTR_ERR(fimc->m2m.m2m_dev);
+ goto err_m2m_r2;
+ }
+
+ ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
+ if (ret) {
+ v4l2_err(v4l2_dev,
+ "%s(): failed to register video device\n", __func__);
+ goto err_m2m_r3;
+ }
+ v4l2_info(v4l2_dev,
+ "FIMC m2m driver registered as /dev/video%d\n", vfd->num);
+
+ return 0;
+
+err_m2m_r3:
+ v4l2_m2m_release(fimc->m2m.m2m_dev);
+err_m2m_r2:
+ video_device_release(fimc->m2m.vfd);
+err_m2m_r1:
+ v4l2_device_unregister(v4l2_dev);
+
+ return ret;
+}
+
+static void fimc_unregister_m2m_device(struct fimc_dev *fimc)
+{
+ if (fimc) {
+ v4l2_m2m_release(fimc->m2m.m2m_dev);
+ video_unregister_device(fimc->m2m.vfd);
+ video_device_release(fimc->m2m.vfd);
+ v4l2_device_unregister(&fimc->m2m.v4l2_dev);
+ }
+}
+
+static void fimc_clk_release(struct fimc_dev *fimc)
+{
+ int i;
+ for (i = 0; i < NUM_FIMC_CLOCKS; i++) {
+ if (fimc->clock[i]) {
+ clk_disable(fimc->clock[i]);
+ clk_put(fimc->clock[i]);
+ }
+ }
+}
+
+static int fimc_clk_get(struct fimc_dev *fimc)
+{
+ int i;
+ for (i = 0; i < NUM_FIMC_CLOCKS; i++) {
+ fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clock_name[i]);
+ if (IS_ERR(fimc->clock[i])) {
+ dev_err(&fimc->pdev->dev,
+ "failed to get fimc clock: %s\n",
+ fimc_clock_name[i]);
+ return -ENXIO;
+ }
+ clk_enable(fimc->clock[i]);
+ }
+ return 0;
+}
+
+static int fimc_probe(struct platform_device *pdev)
+{
+ struct fimc_dev *fimc;
+ struct resource *res;
+ struct samsung_fimc_driverdata *drv_data;
+ int ret = 0;
+
+ dev_dbg(&pdev->dev, "%s():\n", __func__);
+
+ drv_data = (struct samsung_fimc_driverdata *)
+ platform_get_device_id(pdev)->driver_data;
+
+ if (pdev->id >= drv_data->devs_cnt) {
+ dev_err(&pdev->dev, "Invalid platform device id: %d\n",
+ pdev->id);
+ return -EINVAL;
+ }
+
+ fimc = kzalloc(sizeof(struct fimc_dev), GFP_KERNEL);
+ if (!fimc)
+ return -ENOMEM;
+
+ fimc->id = pdev->id;
+ fimc->variant = drv_data->variant[fimc->id];
+ fimc->pdev = pdev;
+ fimc->state = ST_IDLE;
+
+ spin_lock_init(&fimc->irqlock);
+ spin_lock_init(&fimc->slock);
+
+ mutex_init(&fimc->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to find the registers\n");
+ ret = -ENOENT;
+ goto err_info;
+ }
+
+ fimc->regs_res = request_mem_region(res->start, resource_size(res),
+ dev_name(&pdev->dev));
+ if (!fimc->regs_res) {
+ dev_err(&pdev->dev, "failed to obtain register region\n");
+ ret = -ENOENT;
+ goto err_info;
+ }
+
+ fimc->regs = ioremap(res->start, resource_size(res));
+ if (!fimc->regs) {
+ dev_err(&pdev->dev, "failed to map registers\n");
+ ret = -ENXIO;
+ goto err_req_region;
+ }
+
+ ret = fimc_clk_get(fimc);
+ if (ret)
+ goto err_regs_unmap;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get IRQ resource\n");
+ ret = -ENXIO;
+ goto err_clk;
+ }
+ fimc->irq = res->start;
+
+ fimc_hw_reset(fimc);
+
+ ret = request_irq(fimc->irq, fimc_isr, 0, pdev->name, fimc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to install irq (%d)\n", ret);
+ goto err_clk;
+ }
+
+ fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev));
+ if (!fimc->work_queue)
+ goto err_irq;
+
+ ret = fimc_register_m2m_device(fimc);
+ if (ret)
+ goto err_wq;
+
+ fimc_hw_en_lastirq(fimc, true);
+
+ dev_dbg(&pdev->dev, "%s(): fimc-%d registered successfully\n",
+ __func__, fimc->id);
+
+ return 0;
+
+err_wq:
+ destroy_workqueue(fimc->work_queue);
+err_irq:
+ free_irq(fimc->irq, fimc);
+err_clk:
+ fimc_clk_release(fimc);
+err_regs_unmap:
+ iounmap(fimc->regs);
+err_req_region:
+ release_resource(fimc->regs_res);
+ kfree(fimc->regs_res);
+err_info:
+ kfree(fimc);
+ dev_err(&pdev->dev, "failed to install\n");
+ return ret;
+}
+
+static int __devexit fimc_remove(struct platform_device *pdev)
+{
+ struct fimc_dev *fimc =
+ (struct fimc_dev *)platform_get_drvdata(pdev);
+
+ v4l2_info(&fimc->m2m.v4l2_dev, "Removing %s\n", pdev->name);
+
+ free_irq(fimc->irq, fimc);
+
+ fimc_hw_reset(fimc);
+
+ fimc_unregister_m2m_device(fimc);
+ fimc_clk_release(fimc);
+ iounmap(fimc->regs);
+ release_resource(fimc->regs_res);
+ kfree(fimc->regs_res);
+ kfree(fimc);
+ return 0;
+}
+
+static struct samsung_fimc_variant fimc01_variant_s5p = {
+ .has_inp_rot = 1,
+ .has_out_rot = 1,
+ .min_inp_pixsize = 16,
+ .min_out_pixsize = 16,
+
+ .scaler_en_w = 3264,
+ .scaler_dis_w = 8192,
+ .in_rot_en_h = 1920,
+ .in_rot_dis_w = 8192,
+ .out_rot_en_w = 1920,
+ .out_rot_dis_w = 4224,
+};
+
+static struct samsung_fimc_variant fimc2_variant_s5p = {
+ .min_inp_pixsize = 16,
+ .min_out_pixsize = 16,
+
+ .scaler_en_w = 4224,
+ .scaler_dis_w = 8192,
+ .in_rot_en_h = 1920,
+ .in_rot_dis_w = 8192,
+ .out_rot_en_w = 1920,
+ .out_rot_dis_w = 4224,
+};
+
+static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
+ .has_inp_rot = 1,
+ .has_out_rot = 1,
+ .min_inp_pixsize = 16,
+ .min_out_pixsize = 32,
+
+ .scaler_en_w = 4224,
+ .scaler_dis_w = 8192,
+ .in_rot_en_h = 1920,
+ .in_rot_dis_w = 8192,
+ .out_rot_en_w = 1920,
+ .out_rot_dis_w = 4224,
+};
+
+static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+ .min_inp_pixsize = 16,
+ .min_out_pixsize = 32,
+
+ .scaler_en_w = 1920,
+ .scaler_dis_w = 8192,
+ .in_rot_en_h = 1280,
+ .in_rot_dis_w = 8192,
+ .out_rot_en_w = 1280,
+ .out_rot_dis_w = 1920,
+};
+
+static struct samsung_fimc_driverdata fimc_drvdata_s5p = {
+ .variant = {
+ [0] = &fimc01_variant_s5p,
+ [1] = &fimc01_variant_s5p,
+ [2] = &fimc2_variant_s5p,
+ },
+ .devs_cnt = 3
+};
+
+static struct samsung_fimc_driverdata fimc_drvdata_s5pv210 = {
+ .variant = {
+ [0] = &fimc01_variant_s5pv210,
+ [1] = &fimc01_variant_s5pv210,
+ [2] = &fimc2_variant_s5pv210,
+ },
+ .devs_cnt = 3
+};
+
+static struct platform_device_id fimc_driver_ids[] = {
+ {
+ .name = "s5p-fimc",
+ .driver_data = (unsigned long)&fimc_drvdata_s5p,
+ }, {
+ .name = "s5pv210-fimc",
+ .driver_data = (unsigned long)&fimc_drvdata_s5pv210,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, fimc_driver_ids);
+
+static struct platform_driver fimc_driver = {
+ .probe = fimc_probe,
+ .remove = __devexit_p(fimc_remove),
+ .id_table = fimc_driver_ids,
+ .driver = {
+ .name = MODULE_NAME,
+ .owner = THIS_MODULE,
+ }
+};
+
+static char banner[] __initdata = KERN_INFO
+ "S5PC Camera Interface V4L2 Driver, (c) 2010 Samsung Electronics\n";
+
+static int __init fimc_init(void)
+{
+ u32 ret;
+ printk(banner);
+
+ ret = platform_driver_register(&fimc_driver);
+ if (ret) {
+ printk(KERN_ERR "FIMC platform driver register failed\n");
+ return -1;
+ }
+ return 0;
+}
+
+static void __exit fimc_exit(void)
+{
+ platform_driver_unregister(&fimc_driver);
+}
+
+module_init(fimc_init);
+module_exit(fimc_exit);
+
+MODULE_AUTHOR("Sylwester Nawrocki, s.nawrocki@samsung.com");
+MODULE_DESCRIPTION("S3C/S5P FIMC (video postprocessor) driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
new file mode 100644
index 0000000000000..f121b939626a1
--- /dev/null
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -0,0 +1,465 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef FIMC_CORE_H_
+#define FIMC_CORE_H_
+
+#include <linux/types.h>
+#include <media/videobuf-core.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mem2mem.h>
+#include <linux/videodev2.h>
+#include "regs-fimc.h"
+
+#define err(fmt, args...) \
+ printk(KERN_ERR "%s:%d: " fmt "\n", __func__, __LINE__, ##args)
+
+#ifdef DEBUG
+#define dbg(fmt, args...) \
+ printk(KERN_DEBUG "%s:%d: " fmt "\n", __func__, __LINE__, ##args)
+#else
+#define dbg(fmt, args...)
+#endif
+
+#define ctx_m2m_get_frame(frame, ctx, type) do { \
+ if (V4L2_BUF_TYPE_VIDEO_OUTPUT == (type)) { \
+ frame = &(ctx)->s_frame; \
+ } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE == (type)) { \
+ frame = &(ctx)->d_frame; \
+ } else { \
+ v4l2_err(&(ctx)->fimc_dev->m2m.v4l2_dev,\
+ "Wrong buffer/video queue type (%d)\n", type); \
+ return -EINVAL; \
+ } \
+} while (0)
+
+#define NUM_FIMC_CLOCKS 2
+#define MODULE_NAME "s5p-fimc"
+#define FIMC_MAX_DEVS 3
+#define FIMC_MAX_OUT_BUFS 4
+#define SCALER_MAX_HRATIO 64
+#define SCALER_MAX_VRATIO 64
+
+enum {
+ ST_IDLE,
+ ST_OUTDMA_RUN,
+ ST_M2M_PEND,
+};
+
+#define fimc_m2m_active(dev) test_bit(ST_OUTDMA_RUN, &(dev)->state)
+#define fimc_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state)
+
+enum fimc_datapath {
+ FIMC_ITU_CAM_A,
+ FIMC_ITU_CAM_B,
+ FIMC_MIPI_CAM,
+ FIMC_DMA,
+ FIMC_LCDFIFO,
+ FIMC_WRITEBACK
+};
+
+enum fimc_color_fmt {
+ S5P_FIMC_RGB565,
+ S5P_FIMC_RGB666,
+ S5P_FIMC_RGB888,
+ S5P_FIMC_YCBCR420,
+ S5P_FIMC_YCBCR422,
+ S5P_FIMC_YCBYCR422,
+ S5P_FIMC_YCRYCB422,
+ S5P_FIMC_CBYCRY422,
+ S5P_FIMC_CRYCBY422,
+ S5P_FIMC_RGB30_LOCAL,
+ S5P_FIMC_YCBCR444_LOCAL,
+ S5P_FIMC_MAX_COLOR = S5P_FIMC_YCBCR444_LOCAL,
+ S5P_FIMC_COLOR_MASK = 0x0F,
+};
+
+/* Y/Cb/Cr components order at DMA output for 1 plane YCbCr 4:2:2 formats. */
+#define S5P_FIMC_OUT_CRYCBY S5P_CIOCTRL_ORDER422_CRYCBY
+#define S5P_FIMC_OUT_CBYCRY S5P_CIOCTRL_ORDER422_YCRYCB
+#define S5P_FIMC_OUT_YCRYCB S5P_CIOCTRL_ORDER422_CBYCRY
+#define S5P_FIMC_OUT_YCBYCR S5P_CIOCTRL_ORDER422_YCBYCR
+
+/* Input Y/Cb/Cr components order for 1 plane YCbCr 4:2:2 color formats. */
+#define S5P_FIMC_IN_CRYCBY S5P_MSCTRL_ORDER422_CRYCBY
+#define S5P_FIMC_IN_CBYCRY S5P_MSCTRL_ORDER422_YCRYCB
+#define S5P_FIMC_IN_YCRYCB S5P_MSCTRL_ORDER422_CBYCRY
+#define S5P_FIMC_IN_YCBYCR S5P_MSCTRL_ORDER422_YCBYCR
+
+/* Cb/Cr chrominance components order for 2 plane Y/CbCr 4:2:2 formats. */
+#define S5P_FIMC_LSB_CRCB S5P_CIOCTRL_ORDER422_2P_LSB_CRCB
+
+/* The embedded image effect selection */
+#define S5P_FIMC_EFFECT_ORIGINAL S5P_CIIMGEFF_FIN_BYPASS
+#define S5P_FIMC_EFFECT_ARBITRARY S5P_CIIMGEFF_FIN_ARBITRARY
+#define S5P_FIMC_EFFECT_NEGATIVE S5P_CIIMGEFF_FIN_NEGATIVE
+#define S5P_FIMC_EFFECT_ARTFREEZE S5P_CIIMGEFF_FIN_ARTFREEZE
+#define S5P_FIMC_EFFECT_EMBOSSING S5P_CIIMGEFF_FIN_EMBOSSING
+#define S5P_FIMC_EFFECT_SIKHOUETTE S5P_CIIMGEFF_FIN_SILHOUETTE
+
+/* The hardware context state. */
+#define FIMC_PARAMS (1 << 0)
+#define FIMC_SRC_ADDR (1 << 1)
+#define FIMC_DST_ADDR (1 << 2)
+#define FIMC_SRC_FMT (1 << 3)
+#define FIMC_DST_FMT (1 << 4)
+
+/* Image conversion flags */
+#define FIMC_IN_DMA_ACCESS_TILED (1 << 0)
+#define FIMC_IN_DMA_ACCESS_LINEAR (0 << 0)
+#define FIMC_OUT_DMA_ACCESS_TILED (1 << 1)
+#define FIMC_OUT_DMA_ACCESS_LINEAR (0 << 1)
+#define FIMC_SCAN_MODE_PROGRESSIVE (0 << 2)
+#define FIMC_SCAN_MODE_INTERLACED (1 << 2)
+/* YCbCr data dynamic range for RGB-YUV color conversion. Y/Cb/Cr: (0 ~ 255) */
+#define FIMC_COLOR_RANGE_WIDE (0 << 3)
+/* Y (16 ~ 235), Cb/Cr (16 ~ 240) */
+#define FIMC_COLOR_RANGE_NARROW (1 << 3)
+
+#define FLIP_NONE 0
+#define FLIP_X_AXIS 1
+#define FLIP_Y_AXIS 2
+#define FLIP_XY_AXIS (FLIP_X_AXIS | FLIP_Y_AXIS)
+
+/**
+ * struct fimc_fmt - the driver's internal color format data
+ * @name: format description
+ * @fourcc: the fourcc code for this format
+ * @color: the corresponding fimc_color_fmt
+ * @depth: number of bits per pixel
+ * @buff_cnt: number of physically non-contiguous data planes
+ * @planes_cnt: number of physically contiguous data planes
+ */
+struct fimc_fmt {
+ char *name;
+ u32 fourcc;
+ u32 color;
+ u32 depth;
+ u16 buff_cnt;
+ u16 planes_cnt;
+};
+
+/**
+ * struct fimc_dma_offset - pixel offset information for DMA
+ * @y_h: y value horizontal offset
+ * @y_v: y value vertical offset
+ * @cb_h: cb value horizontal offset
+ * @cb_v: cb value vertical offset
+ * @cr_h: cr value horizontal offset
+ * @cr_v: cr value vertical offset
+ */
+struct fimc_dma_offset {
+ int y_h;
+ int y_v;
+ int cb_h;
+ int cb_v;
+ int cr_h;
+ int cr_v;
+};
+
+/**
+ * struct fimc_effect - the configuration data for the "Arbitrary" image effect
+ * @type: effect type
+ * @pat_cb: cr value when type is "arbitrary"
+ * @pat_cr: cr value when type is "arbitrary"
+ */
+struct fimc_effect {
+ u32 type;
+ u8 pat_cb;
+ u8 pat_cr;
+};
+
+/**
+ * struct fimc_scaler - the configuration data for FIMC inetrnal scaler
+ *
+ * @enabled: the flag set when the scaler is used
+ * @hfactor: horizontal shift factor
+ * @vfactor: vertical shift factor
+ * @pre_hratio: horizontal ratio of the prescaler
+ * @pre_vratio: vertical ratio of the prescaler
+ * @pre_dst_width: the prescaler's destination width
+ * @pre_dst_height: the prescaler's destination height
+ * @scaleup_h: flag indicating scaling up horizontally
+ * @scaleup_v: flag indicating scaling up vertically
+ * @main_hratio: the main scaler's horizontal ratio
+ * @main_vratio: the main scaler's vertical ratio
+ * @real_width: source width - offset
+ * @real_height: source height - offset
+ * @copy_mode: flag set if one-to-one mode is used, i.e. no scaling
+ * and color format conversion
+ */
+struct fimc_scaler {
+ u32 enabled;
+ u32 hfactor;
+ u32 vfactor;
+ u32 pre_hratio;
+ u32 pre_vratio;
+ u32 pre_dst_width;
+ u32 pre_dst_height;
+ u32 scaleup_h;
+ u32 scaleup_v;
+ u32 main_hratio;
+ u32 main_vratio;
+ u32 real_width;
+ u32 real_height;
+ u32 copy_mode;
+};
+
+/**
+ * struct fimc_addr - the FIMC physical address set for DMA
+ *
+ * @y: luminance plane physical address
+ * @cb: Cb plane physical address
+ * @cr: Cr plane physical address
+ */
+struct fimc_addr {
+ u32 y;
+ u32 cb;
+ u32 cr;
+};
+
+/**
+ * struct fimc_vid_buffer - the driver's video buffer
+ * @vb: v4l videobuf buffer
+ */
+struct fimc_vid_buffer {
+ struct videobuf_buffer vb;
+};
+
+/**
+ * struct fimc_frame - input/output frame format properties
+ *
+ * @f_width: image full width (virtual screen size)
+ * @f_height: image full height (virtual screen size)
+ * @o_width: original image width as set by S_FMT
+ * @o_height: original image height as set by S_FMT
+ * @offs_h: image horizontal pixel offset
+ * @offs_v: image vertical pixel offset
+ * @width: image pixel width
+ * @height: image pixel weight
+ * @paddr: image frame buffer physical addresses
+ * @buf_cnt: number of buffers depending on a color format
+ * @size: image size in bytes
+ * @color: color format
+ * @dma_offset: DMA offset in bytes
+ */
+struct fimc_frame {
+ u32 f_width;
+ u32 f_height;
+ u32 o_width;
+ u32 o_height;
+ u32 offs_h;
+ u32 offs_v;
+ u32 width;
+ u32 height;
+ u32 size;
+ struct fimc_addr paddr;
+ struct fimc_dma_offset dma_offset;
+ struct fimc_fmt *fmt;
+};
+
+/**
+ * struct fimc_m2m_device - v4l2 memory-to-memory device data
+ * @vfd: the video device node for v4l2 m2m mode
+ * @v4l2_dev: v4l2 device for m2m mode
+ * @m2m_dev: v4l2 memory-to-memory device data
+ * @ctx: hardware context data
+ * @refcnt: the reference counter
+ */
+struct fimc_m2m_device {
+ struct video_device *vfd;
+ struct v4l2_device v4l2_dev;
+ struct v4l2_m2m_dev *m2m_dev;
+ struct fimc_ctx *ctx;
+ int refcnt;
+};
+
+/**
+ * struct samsung_fimc_variant - camera interface variant information
+ *
+ * @pix_hoff: indicate whether horizontal offset is in pixels or in bytes
+ * @has_inp_rot: set if has input rotator
+ * @has_out_rot: set if has output rotator
+ * @min_inp_pixsize: minimum input pixel size
+ * @min_out_pixsize: minimum output pixel size
+ * @scaler_en_w: maximum input pixel width when the scaler is enabled
+ * @scaler_dis_w: maximum input pixel width when the scaler is disabled
+ * @in_rot_en_h: maximum input width when the input rotator is used
+ * @in_rot_dis_w: maximum input width when the input rotator is used
+ * @out_rot_en_w: maximum output width for the output rotator enabled
+ * @out_rot_dis_w: maximum output width for the output rotator enabled
+ */
+struct samsung_fimc_variant {
+ unsigned int pix_hoff:1;
+ unsigned int has_inp_rot:1;
+ unsigned int has_out_rot:1;
+
+ u16 min_inp_pixsize;
+ u16 min_out_pixsize;
+ u16 scaler_en_w;
+ u16 scaler_dis_w;
+ u16 in_rot_en_h;
+ u16 in_rot_dis_w;
+ u16 out_rot_en_w;
+ u16 out_rot_dis_w;
+};
+
+/**
+ * struct samsung_fimc_driverdata - per-device type driver data for init time.
+ *
+ * @variant: the variant information for this driver.
+ * @dev_cnt: number of fimc sub-devices available in SoC
+ */
+struct samsung_fimc_driverdata {
+ struct samsung_fimc_variant *variant[FIMC_MAX_DEVS];
+ int devs_cnt;
+};
+
+struct fimc_ctx;
+
+/**
+ * struct fimc_subdev - abstraction for a FIMC entity
+ *
+ * @slock: the spinlock protecting this data structure
+ * @lock: the mutex protecting this data structure
+ * @pdev: pointer to the FIMC platform device
+ * @id: FIMC device index (0..2)
+ * @clock[]: the clocks required for FIMC operation
+ * @regs: the mapped hardware registers
+ * @regs_res: the resource claimed for IO registers
+ * @irq: interrupt number of the FIMC subdevice
+ * @irqlock: spinlock protecting videbuffer queue
+ * @m2m: memory-to-memory V4L2 device information
+ * @state: the FIMC device state flags
+ */
+struct fimc_dev {
+ spinlock_t slock;
+ struct mutex lock;
+ struct platform_device *pdev;
+ struct samsung_fimc_variant *variant;
+ int id;
+ struct clk *clock[NUM_FIMC_CLOCKS];
+ void __iomem *regs;
+ struct resource *regs_res;
+ int irq;
+ spinlock_t irqlock;
+ struct workqueue_struct *work_queue;
+ struct fimc_m2m_device m2m;
+ unsigned long state;
+};
+
+/**
+ * fimc_ctx - the device context data
+ *
+ * @lock: mutex protecting this data structure
+ * @s_frame: source frame properties
+ * @d_frame: destination frame properties
+ * @out_order_1p: output 1-plane YCBCR order
+ * @out_order_2p: output 2-plane YCBCR order
+ * @in_order_1p input 1-plane YCBCR order
+ * @in_order_2p: input 2-plane YCBCR order
+ * @in_path: input mode (DMA or camera)
+ * @out_path: output mode (DMA or FIFO)
+ * @scaler: image scaler properties
+ * @effect: image effect
+ * @rotation: image clockwise rotation in degrees
+ * @flip: image flip mode
+ * @flags: an additional flags for image conversion
+ * @state: flags to keep track of user configuration
+ * @fimc_dev: the FIMC device this context applies to
+ * @m2m_ctx: memory-to-memory device context
+ */
+struct fimc_ctx {
+ spinlock_t slock;
+ struct fimc_frame s_frame;
+ struct fimc_frame d_frame;
+ u32 out_order_1p;
+ u32 out_order_2p;
+ u32 in_order_1p;
+ u32 in_order_2p;
+ enum fimc_datapath in_path;
+ enum fimc_datapath out_path;
+ struct fimc_scaler scaler;
+ struct fimc_effect effect;
+ int rotation;
+ u32 flip;
+ u32 flags;
+ u32 state;
+ struct fimc_dev *fimc_dev;
+ struct v4l2_m2m_ctx *m2m_ctx;
+};
+
+
+static inline int tiled_fmt(struct fimc_fmt *fmt)
+{
+ return 0;
+}
+
+static inline void fimc_hw_clear_irq(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_CIGCTRL);
+ cfg |= S5P_CIGCTRL_IRQ_CLR;
+ writel(cfg, dev->regs + S5P_CIGCTRL);
+}
+
+static inline void fimc_hw_start_scaler(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+ cfg |= S5P_CISCCTRL_SCALERSTART;
+ writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+static inline void fimc_hw_stop_scaler(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+ cfg &= ~S5P_CISCCTRL_SCALERSTART;
+ writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+static inline void fimc_hw_dis_capture(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_CIIMGCPT);
+ cfg &= ~(S5P_CIIMGCPT_IMGCPTEN | S5P_CIIMGCPT_IMGCPTEN_SC);
+ writel(cfg, dev->regs + S5P_CIIMGCPT);
+}
+
+static inline void fimc_hw_start_in_dma(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_MSCTRL);
+ cfg |= S5P_MSCTRL_ENVID;
+ writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+static inline void fimc_hw_stop_in_dma(struct fimc_dev *dev)
+{
+ u32 cfg = readl(dev->regs + S5P_MSCTRL);
+ cfg &= ~S5P_MSCTRL_ENVID;
+ writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+/* -----------------------------------------------------*/
+/* fimc-reg.c */
+void fimc_hw_reset(struct fimc_dev *dev);
+void fimc_hw_set_rotation(struct fimc_ctx *ctx);
+void fimc_hw_set_target_format(struct fimc_ctx *ctx);
+void fimc_hw_set_out_dma(struct fimc_ctx *ctx);
+void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable);
+void fimc_hw_en_irq(struct fimc_dev *dev, int enable);
+void fimc_hw_set_prescaler(struct fimc_ctx *ctx);
+void fimc_hw_set_scaler(struct fimc_ctx *ctx);
+void fimc_hw_en_capture(struct fimc_ctx *ctx);
+void fimc_hw_set_effect(struct fimc_ctx *ctx);
+void fimc_hw_set_in_dma(struct fimc_ctx *ctx);
+void fimc_hw_set_input_path(struct fimc_ctx *ctx);
+void fimc_hw_set_output_path(struct fimc_ctx *ctx);
+void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr);
+void fimc_hw_set_output_addr(struct fimc_dev *dev, struct fimc_addr *paddr);
+
+#endif /* FIMC_CORE_H_ */
diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c
new file mode 100644
index 0000000000000..5570f1ce0c9c8
--- /dev/null
+++ b/drivers/media/video/s5p-fimc/fimc-reg.c
@@ -0,0 +1,527 @@
+/*
+ * Register interface file for Samsung Camera Interface (FIMC) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, s.nawrocki@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <mach/map.h>
+
+#include "fimc-core.h"
+
+
+void fimc_hw_reset(struct fimc_dev *dev)
+{
+ u32 cfg;
+
+ cfg = readl(dev->regs + S5P_CISRCFMT);
+ cfg |= S5P_CISRCFMT_ITU601_8BIT;
+ writel(cfg, dev->regs + S5P_CISRCFMT);
+
+ /* Software reset. */
+ cfg = readl(dev->regs + S5P_CIGCTRL);
+ cfg |= (S5P_CIGCTRL_SWRST | S5P_CIGCTRL_IRQ_LEVEL);
+ writel(cfg, dev->regs + S5P_CIGCTRL);
+ msleep(1);
+
+ cfg = readl(dev->regs + S5P_CIGCTRL);
+ cfg &= ~S5P_CIGCTRL_SWRST;
+ writel(cfg, dev->regs + S5P_CIGCTRL);
+
+}
+
+void fimc_hw_set_rotation(struct fimc_ctx *ctx)
+{
+ u32 cfg, flip;
+ struct fimc_dev *dev = ctx->fimc_dev;
+
+ cfg = readl(dev->regs + S5P_CITRGFMT);
+ cfg &= ~(S5P_CITRGFMT_INROT90 | S5P_CITRGFMT_OUTROT90);
+
+ flip = readl(dev->regs + S5P_MSCTRL);
+ flip &= ~S5P_MSCTRL_FLIP_MASK;
+
+ /*
+ * The input and output rotator cannot work simultaneously.
+ * Use the output rotator in output DMA mode or the input rotator
+ * in direct fifo output mode.
+ */
+ if (ctx->rotation == 90 || ctx->rotation == 270) {
+ if (ctx->out_path == FIMC_LCDFIFO) {
+ cfg |= S5P_CITRGFMT_INROT90;
+ if (ctx->rotation == 270)
+ flip |= S5P_MSCTRL_FLIP_180;
+ } else {
+ cfg |= S5P_CITRGFMT_OUTROT90;
+ if (ctx->rotation == 270)
+ cfg |= S5P_CITRGFMT_FLIP_180;
+ }
+ } else if (ctx->rotation == 180) {
+ if (ctx->out_path == FIMC_LCDFIFO)
+ flip |= S5P_MSCTRL_FLIP_180;
+ else
+ cfg |= S5P_CITRGFMT_FLIP_180;
+ }
+ if (ctx->rotation == 180 || ctx->rotation == 270)
+ writel(flip, dev->regs + S5P_MSCTRL);
+ writel(cfg, dev->regs + S5P_CITRGFMT);
+}
+
+static u32 fimc_hw_get_in_flip(u32 ctx_flip)
+{
+ u32 flip = S5P_MSCTRL_FLIP_NORMAL;
+
+ switch (ctx_flip) {
+ case FLIP_X_AXIS:
+ flip = S5P_MSCTRL_FLIP_X_MIRROR;
+ break;
+ case FLIP_Y_AXIS:
+ flip = S5P_MSCTRL_FLIP_Y_MIRROR;
+ break;
+ case FLIP_XY_AXIS:
+ flip = S5P_MSCTRL_FLIP_180;
+ break;
+ }
+
+ return flip;
+}
+
+static u32 fimc_hw_get_target_flip(u32 ctx_flip)
+{
+ u32 flip = S5P_CITRGFMT_FLIP_NORMAL;
+
+ switch (ctx_flip) {
+ case FLIP_X_AXIS:
+ flip = S5P_CITRGFMT_FLIP_X_MIRROR;
+ break;
+ case FLIP_Y_AXIS:
+ flip = S5P_CITRGFMT_FLIP_Y_MIRROR;
+ break;
+ case FLIP_XY_AXIS:
+ flip = S5P_CITRGFMT_FLIP_180;
+ break;
+ case FLIP_NONE:
+ break;
+
+ }
+ return flip;
+}
+
+void fimc_hw_set_target_format(struct fimc_ctx *ctx)
+{
+ u32 cfg;
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->d_frame;
+
+ dbg("w= %d, h= %d color: %d", frame->width,
+ frame->height, frame->fmt->color);
+
+ cfg = readl(dev->regs + S5P_CITRGFMT);
+ cfg &= ~(S5P_CITRGFMT_FMT_MASK | S5P_CITRGFMT_HSIZE_MASK |
+ S5P_CITRGFMT_VSIZE_MASK);
+
+ switch (frame->fmt->color) {
+ case S5P_FIMC_RGB565:
+ case S5P_FIMC_RGB666:
+ case S5P_FIMC_RGB888:
+ cfg |= S5P_CITRGFMT_RGB;
+ break;
+ case S5P_FIMC_YCBCR420:
+ cfg |= S5P_CITRGFMT_YCBCR420;
+ break;
+ case S5P_FIMC_YCBYCR422:
+ case S5P_FIMC_YCRYCB422:
+ case S5P_FIMC_CBYCRY422:
+ case S5P_FIMC_CRYCBY422:
+ if (frame->fmt->planes_cnt == 1)
+ cfg |= S5P_CITRGFMT_YCBCR422_1P;
+ else
+ cfg |= S5P_CITRGFMT_YCBCR422;
+ break;
+ default:
+ break;
+ }
+
+ cfg |= S5P_CITRGFMT_HSIZE(frame->width);
+ cfg |= S5P_CITRGFMT_VSIZE(frame->height);
+
+ if (ctx->rotation == 0) {
+ cfg &= ~S5P_CITRGFMT_FLIP_MASK;
+ cfg |= fimc_hw_get_target_flip(ctx->flip);
+ }
+ writel(cfg, dev->regs + S5P_CITRGFMT);
+
+ cfg = readl(dev->regs + S5P_CITAREA) & ~S5P_CITAREA_MASK;
+ cfg |= (frame->width * frame->height);
+ writel(cfg, dev->regs + S5P_CITAREA);
+}
+
+static void fimc_hw_set_out_dma_size(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->d_frame;
+ u32 cfg = 0;
+
+ if (ctx->rotation == 90 || ctx->rotation == 270) {
+ cfg |= S5P_ORIG_SIZE_HOR(frame->f_height);
+ cfg |= S5P_ORIG_SIZE_VER(frame->f_width);
+ } else {
+ cfg |= S5P_ORIG_SIZE_HOR(frame->f_width);
+ cfg |= S5P_ORIG_SIZE_VER(frame->f_height);
+ }
+ writel(cfg, dev->regs + S5P_ORGOSIZE);
+}
+
+void fimc_hw_set_out_dma(struct fimc_ctx *ctx)
+{
+ u32 cfg;
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->d_frame;
+ struct fimc_dma_offset *offset = &frame->dma_offset;
+
+ /* Set the input dma offsets. */
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->y_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->y_v);
+ writel(cfg, dev->regs + S5P_CIOYOFF);
+
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->cb_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->cb_v);
+ writel(cfg, dev->regs + S5P_CIOCBOFF);
+
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->cr_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->cr_v);
+ writel(cfg, dev->regs + S5P_CIOCROFF);
+
+ fimc_hw_set_out_dma_size(ctx);
+
+ /* Configure chroma components order. */
+ cfg = readl(dev->regs + S5P_CIOCTRL);
+
+ cfg &= ~(S5P_CIOCTRL_ORDER2P_MASK | S5P_CIOCTRL_ORDER422_MASK |
+ S5P_CIOCTRL_YCBCR_PLANE_MASK);
+
+ if (frame->fmt->planes_cnt == 1)
+ cfg |= ctx->out_order_1p;
+ else if (frame->fmt->planes_cnt == 2)
+ cfg |= ctx->out_order_2p | S5P_CIOCTRL_YCBCR_2PLANE;
+ else if (frame->fmt->planes_cnt == 3)
+ cfg |= S5P_CIOCTRL_YCBCR_3PLANE;
+
+ writel(cfg, dev->regs + S5P_CIOCTRL);
+}
+
+static void fimc_hw_en_autoload(struct fimc_dev *dev, int enable)
+{
+ u32 cfg = readl(dev->regs + S5P_ORGISIZE);
+ if (enable)
+ cfg |= S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+ else
+ cfg &= ~S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+ writel(cfg, dev->regs + S5P_ORGISIZE);
+}
+
+void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable)
+{
+ unsigned long flags;
+ u32 cfg;
+
+ spin_lock_irqsave(&dev->slock, flags);
+
+ cfg = readl(dev->regs + S5P_CIOCTRL);
+ if (enable)
+ cfg |= S5P_CIOCTRL_LASTIRQ_ENABLE;
+ else
+ cfg &= ~S5P_CIOCTRL_LASTIRQ_ENABLE;
+ writel(cfg, dev->regs + S5P_CIOCTRL);
+
+ spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+void fimc_hw_set_prescaler(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_scaler *sc = &ctx->scaler;
+ u32 cfg = 0, shfactor;
+
+ shfactor = 10 - (sc->hfactor + sc->vfactor);
+
+ cfg |= S5P_CISCPRERATIO_SHFACTOR(shfactor);
+ cfg |= S5P_CISCPRERATIO_HOR(sc->pre_hratio);
+ cfg |= S5P_CISCPRERATIO_VER(sc->pre_vratio);
+ writel(cfg, dev->regs + S5P_CISCPRERATIO);
+
+ cfg = 0;
+ cfg |= S5P_CISCPREDST_WIDTH(sc->pre_dst_width);
+ cfg |= S5P_CISCPREDST_HEIGHT(sc->pre_dst_height);
+ writel(cfg, dev->regs + S5P_CISCPREDST);
+}
+
+void fimc_hw_set_scaler(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_scaler *sc = &ctx->scaler;
+ struct fimc_frame *src_frame = &ctx->s_frame;
+ struct fimc_frame *dst_frame = &ctx->d_frame;
+ u32 cfg = 0;
+
+ if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW))
+ cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE);
+
+ if (!sc->enabled)
+ cfg |= S5P_CISCCTRL_SCALERBYPASS;
+
+ if (sc->scaleup_h)
+ cfg |= S5P_CISCCTRL_SCALEUP_H;
+
+ if (sc->scaleup_v)
+ cfg |= S5P_CISCCTRL_SCALEUP_V;
+
+ if (sc->copy_mode)
+ cfg |= S5P_CISCCTRL_ONE2ONE;
+
+
+ if (ctx->in_path == FIMC_DMA) {
+ if (src_frame->fmt->color == S5P_FIMC_RGB565)
+ cfg |= S5P_CISCCTRL_INRGB_FMT_RGB565;
+ else if (src_frame->fmt->color == S5P_FIMC_RGB666)
+ cfg |= S5P_CISCCTRL_INRGB_FMT_RGB666;
+ else if (src_frame->fmt->color == S5P_FIMC_RGB888)
+ cfg |= S5P_CISCCTRL_INRGB_FMT_RGB888;
+ }
+
+ if (ctx->out_path == FIMC_DMA) {
+ if (dst_frame->fmt->color == S5P_FIMC_RGB565)
+ cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB565;
+ else if (dst_frame->fmt->color == S5P_FIMC_RGB666)
+ cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB666;
+ else if (dst_frame->fmt->color == S5P_FIMC_RGB888)
+ cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB888;
+ } else {
+ cfg |= S5P_CISCCTRL_OUTRGB_FMT_RGB888;
+
+ if (ctx->flags & FIMC_SCAN_MODE_INTERLACED)
+ cfg |= S5P_CISCCTRL_INTERLACE;
+ }
+
+ dbg("main_hratio= 0x%X main_vratio= 0x%X",
+ sc->main_hratio, sc->main_vratio);
+
+ cfg |= S5P_CISCCTRL_SC_HORRATIO(sc->main_hratio);
+ cfg |= S5P_CISCCTRL_SC_VERRATIO(sc->main_vratio);
+
+ writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+void fimc_hw_en_capture(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ u32 cfg;
+
+ cfg = readl(dev->regs + S5P_CIIMGCPT);
+ /* One shot mode for output DMA or freerun for FIFO. */
+ if (ctx->out_path == FIMC_DMA)
+ cfg |= S5P_CIIMGCPT_CPT_FREN_ENABLE;
+ else
+ cfg &= ~S5P_CIIMGCPT_CPT_FREN_ENABLE;
+
+ if (ctx->scaler.enabled)
+ cfg |= S5P_CIIMGCPT_IMGCPTEN_SC;
+
+ writel(cfg | S5P_CIIMGCPT_IMGCPTEN, dev->regs + S5P_CIIMGCPT);
+}
+
+void fimc_hw_set_effect(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_effect *effect = &ctx->effect;
+ u32 cfg = (S5P_CIIMGEFF_IE_ENABLE | S5P_CIIMGEFF_IE_SC_AFTER);
+
+ cfg |= effect->type;
+
+ if (effect->type == S5P_FIMC_EFFECT_ARBITRARY) {
+ cfg |= S5P_CIIMGEFF_PAT_CB(effect->pat_cb);
+ cfg |= S5P_CIIMGEFF_PAT_CR(effect->pat_cr);
+ }
+
+ writel(cfg, dev->regs + S5P_CIIMGEFF);
+}
+
+static void fimc_hw_set_in_dma_size(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->s_frame;
+ u32 cfg_o = 0;
+ u32 cfg_r = 0;
+
+ if (FIMC_LCDFIFO == ctx->out_path)
+ cfg_r |= S5P_CIREAL_ISIZE_AUTOLOAD_EN;
+
+ cfg_o |= S5P_ORIG_SIZE_HOR(frame->f_width);
+ cfg_o |= S5P_ORIG_SIZE_VER(frame->f_height);
+ cfg_r |= S5P_CIREAL_ISIZE_WIDTH(frame->width);
+ cfg_r |= S5P_CIREAL_ISIZE_HEIGHT(frame->height);
+
+ writel(cfg_o, dev->regs + S5P_ORGISIZE);
+ writel(cfg_r, dev->regs + S5P_CIREAL_ISIZE);
+}
+
+void fimc_hw_set_in_dma(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+ struct fimc_frame *frame = &ctx->s_frame;
+ struct fimc_dma_offset *offset = &frame->dma_offset;
+ u32 cfg = 0;
+
+ /* Set the pixel offsets. */
+ cfg |= S5P_CIO_OFFS_HOR(offset->y_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->y_v);
+ writel(cfg, dev->regs + S5P_CIIYOFF);
+
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->cb_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->cb_v);
+ writel(cfg, dev->regs + S5P_CIICBOFF);
+
+ cfg = 0;
+ cfg |= S5P_CIO_OFFS_HOR(offset->cr_h);
+ cfg |= S5P_CIO_OFFS_VER(offset->cr_v);
+ writel(cfg, dev->regs + S5P_CIICROFF);
+
+ /* Input original and real size. */
+ fimc_hw_set_in_dma_size(ctx);
+
+ /* Autoload is used currently only in FIFO mode. */
+ fimc_hw_en_autoload(dev, ctx->out_path == FIMC_LCDFIFO);
+
+ /* Set the input DMA to process single frame only. */
+ cfg = readl(dev->regs + S5P_MSCTRL);
+ cfg &= ~(S5P_MSCTRL_FLIP_MASK
+ | S5P_MSCTRL_INFORMAT_MASK
+ | S5P_MSCTRL_IN_BURST_COUNT_MASK
+ | S5P_MSCTRL_INPUT_MASK
+ | S5P_MSCTRL_C_INT_IN_MASK
+ | S5P_MSCTRL_2P_IN_ORDER_MASK);
+
+ cfg |= (S5P_MSCTRL_FRAME_COUNT(1) | S5P_MSCTRL_INPUT_MEMORY);
+
+ switch (frame->fmt->color) {
+ case S5P_FIMC_RGB565:
+ case S5P_FIMC_RGB666:
+ case S5P_FIMC_RGB888:
+ cfg |= S5P_MSCTRL_INFORMAT_RGB;
+ break;
+ case S5P_FIMC_YCBCR420:
+ cfg |= S5P_MSCTRL_INFORMAT_YCBCR420;
+
+ if (frame->fmt->planes_cnt == 2)
+ cfg |= ctx->in_order_2p | S5P_MSCTRL_C_INT_IN_2PLANE;
+ else
+ cfg |= S5P_MSCTRL_C_INT_IN_3PLANE;
+
+ break;
+ case S5P_FIMC_YCBYCR422:
+ case S5P_FIMC_YCRYCB422:
+ case S5P_FIMC_CBYCRY422:
+ case S5P_FIMC_CRYCBY422:
+ if (frame->fmt->planes_cnt == 1) {
+ cfg |= ctx->in_order_1p
+ | S5P_MSCTRL_INFORMAT_YCBCR422_1P;
+ } else {
+ cfg |= S5P_MSCTRL_INFORMAT_YCBCR422;
+
+ if (frame->fmt->planes_cnt == 2)
+ cfg |= ctx->in_order_2p
+ | S5P_MSCTRL_C_INT_IN_2PLANE;
+ else
+ cfg |= S5P_MSCTRL_C_INT_IN_3PLANE;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Input DMA flip mode (and rotation).
+ * Do not allow simultaneous rotation and flipping.
+ */
+ if (!ctx->rotation && ctx->out_path == FIMC_LCDFIFO)
+ cfg |= fimc_hw_get_in_flip(ctx->flip);
+
+ writel(cfg, dev->regs + S5P_MSCTRL);
+
+ /* Input/output DMA linear/tiled mode. */
+ cfg = readl(dev->regs + S5P_CIDMAPARAM);
+ cfg &= ~S5P_CIDMAPARAM_TILE_MASK;
+
+ if (tiled_fmt(ctx->s_frame.fmt))
+ cfg |= S5P_CIDMAPARAM_R_64X32;
+
+ if (tiled_fmt(ctx->d_frame.fmt))
+ cfg |= S5P_CIDMAPARAM_W_64X32;
+
+ writel(cfg, dev->regs + S5P_CIDMAPARAM);
+}
+
+
+void fimc_hw_set_input_path(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+
+ u32 cfg = readl(dev->regs + S5P_MSCTRL);
+ cfg &= ~S5P_MSCTRL_INPUT_MASK;
+
+ if (ctx->in_path == FIMC_DMA)
+ cfg |= S5P_MSCTRL_INPUT_MEMORY;
+ else
+ cfg |= S5P_MSCTRL_INPUT_EXTCAM;
+
+ writel(cfg, dev->regs + S5P_MSCTRL);
+}
+
+void fimc_hw_set_output_path(struct fimc_ctx *ctx)
+{
+ struct fimc_dev *dev = ctx->fimc_dev;
+
+ u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+ cfg &= ~S5P_CISCCTRL_LCDPATHEN_FIFO;
+ if (ctx->out_path == FIMC_LCDFIFO)
+ cfg |= S5P_CISCCTRL_LCDPATHEN_FIFO;
+ writel(cfg, dev->regs + S5P_CISCCTRL);
+}
+
+void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr)
+{
+ u32 cfg = 0;
+
+ cfg = readl(dev->regs + S5P_CIREAL_ISIZE);
+ cfg |= S5P_CIREAL_ISIZE_ADDR_CH_DIS;
+ writel(cfg, dev->regs + S5P_CIREAL_ISIZE);
+
+ writel(paddr->y, dev->regs + S5P_CIIYSA0);
+ writel(paddr->cb, dev->regs + S5P_CIICBSA0);
+ writel(paddr->cr, dev->regs + S5P_CIICRSA0);
+
+ cfg &= ~S5P_CIREAL_ISIZE_ADDR_CH_DIS;
+ writel(cfg, dev->regs + S5P_CIREAL_ISIZE);
+}
+
+void fimc_hw_set_output_addr(struct fimc_dev *dev, struct fimc_addr *paddr)
+{
+ int i;
+ /* Set all the output register sets to point to single video buffer. */
+ for (i = 0; i < FIMC_MAX_OUT_BUFS; i++) {
+ writel(paddr->y, dev->regs + S5P_CIOYSA(i));
+ writel(paddr->cb, dev->regs + S5P_CIOCBSA(i));
+ writel(paddr->cr, dev->regs + S5P_CIOCRSA(i));
+ }
+}
diff --git a/drivers/media/video/s5p-fimc/regs-fimc.h b/drivers/media/video/s5p-fimc/regs-fimc.h
new file mode 100644
index 0000000000000..a3cfe824db006
--- /dev/null
+++ b/drivers/media/video/s5p-fimc/regs-fimc.h
@@ -0,0 +1,293 @@
+/*
+ * Register definition file for Samsung Camera Interface (FIMC) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef REGS_FIMC_H_
+#define REGS_FIMC_H_
+
+#define S5P_CIOYSA(__x) (0x18 + (__x) * 4)
+#define S5P_CIOCBSA(__x) (0x28 + (__x) * 4)
+#define S5P_CIOCRSA(__x) (0x38 + (__x) * 4)
+
+/* Input source format */
+#define S5P_CISRCFMT 0x00
+#define S5P_CISRCFMT_ITU601_8BIT (1 << 31)
+#define S5P_CISRCFMT_ITU601_16BIT (1 << 29)
+#define S5P_CISRCFMT_ORDER422_YCBYCR (0 << 14)
+#define S5P_CISRCFMT_ORDER422_YCRYCB (1 << 14)
+#define S5P_CISRCFMT_ORDER422_CBYCRY (2 << 14)
+#define S5P_CISRCFMT_ORDER422_CRYCBY (3 << 14)
+#define S5P_CISRCFMT_HSIZE(x) ((x) << 16)
+#define S5P_CISRCFMT_VSIZE(x) ((x) << 0)
+
+/* Window offset */
+#define S5P_CIWDOFST 0x04
+#define S5P_CIWDOFST_WINOFSEN (1 << 31)
+#define S5P_CIWDOFST_CLROVFIY (1 << 30)
+#define S5P_CIWDOFST_CLROVRLB (1 << 29)
+#define S5P_CIWDOFST_WINHOROFST_MASK (0x7ff << 16)
+#define S5P_CIWDOFST_CLROVFICB (1 << 15)
+#define S5P_CIWDOFST_CLROVFICR (1 << 14)
+#define S5P_CIWDOFST_WINHOROFST(x) ((x) << 16)
+#define S5P_CIWDOFST_WINVEROFST(x) ((x) << 0)
+#define S5P_CIWDOFST_WINVEROFST_MASK (0xfff << 0)
+
+/* Global control */
+#define S5P_CIGCTRL 0x08
+#define S5P_CIGCTRL_SWRST (1 << 31)
+#define S5P_CIGCTRL_CAMRST_A (1 << 30)
+#define S5P_CIGCTRL_SELCAM_ITU_A (1 << 29)
+#define S5P_CIGCTRL_SELCAM_ITU_MASK (1 << 29)
+#define S5P_CIGCTRL_TESTPAT_NORMAL (0 << 27)
+#define S5P_CIGCTRL_TESTPAT_COLOR_BAR (1 << 27)
+#define S5P_CIGCTRL_TESTPAT_HOR_INC (2 << 27)
+#define S5P_CIGCTRL_TESTPAT_VER_INC (3 << 27)
+#define S5P_CIGCTRL_TESTPAT_MASK (3 << 27)
+#define S5P_CIGCTRL_TESTPAT_SHIFT (27)
+#define S5P_CIGCTRL_INVPOLPCLK (1 << 26)
+#define S5P_CIGCTRL_INVPOLVSYNC (1 << 25)
+#define S5P_CIGCTRL_INVPOLHREF (1 << 24)
+#define S5P_CIGCTRL_IRQ_OVFEN (1 << 22)
+#define S5P_CIGCTRL_HREF_MASK (1 << 21)
+#define S5P_CIGCTRL_IRQ_LEVEL (1 << 20)
+#define S5P_CIGCTRL_IRQ_CLR (1 << 19)
+#define S5P_CIGCTRL_IRQ_ENABLE (1 << 16)
+#define S5P_CIGCTRL_SHDW_DISABLE (1 << 12)
+#define S5P_CIGCTRL_SELCAM_MIPI_A (1 << 7)
+#define S5P_CIGCTRL_CAMIF_SELWB (1 << 6)
+#define S5P_CIGCTRL_INVPOLHSYNC (1 << 4)
+#define S5P_CIGCTRL_SELCAM_MIPI (1 << 3)
+#define S5P_CIGCTRL_INTERLACE (1 << 0)
+
+/* Window offset 2 */
+#define S5P_CIWDOFST2 0x14
+#define S5P_CIWDOFST2_HOROFF_MASK (0xfff << 16)
+#define S5P_CIWDOFST2_VEROFF_MASK (0xfff << 0)
+#define S5P_CIWDOFST2_HOROFF(x) ((x) << 16)
+#define S5P_CIWDOFST2_VEROFF(x) ((x) << 0)
+
+/* Output DMA Y plane start address */
+#define S5P_CIOYSA1 0x18
+#define S5P_CIOYSA2 0x1c
+#define S5P_CIOYSA3 0x20
+#define S5P_CIOYSA4 0x24
+
+/* Output DMA Cb plane start address */
+#define S5P_CIOCBSA1 0x28
+#define S5P_CIOCBSA2 0x2c
+#define S5P_CIOCBSA3 0x30
+#define S5P_CIOCBSA4 0x34
+
+/* Output DMA Cr plane start address */
+#define S5P_CIOCRSA1 0x38
+#define S5P_CIOCRSA2 0x3c
+#define S5P_CIOCRSA3 0x40
+#define S5P_CIOCRSA4 0x44
+
+/* Target image format */
+#define S5P_CITRGFMT 0x48
+#define S5P_CITRGFMT_INROT90 (1 << 31)
+#define S5P_CITRGFMT_YCBCR420 (0 << 29)
+#define S5P_CITRGFMT_YCBCR422 (1 << 29)
+#define S5P_CITRGFMT_YCBCR422_1P (2 << 29)
+#define S5P_CITRGFMT_RGB (3 << 29)
+#define S5P_CITRGFMT_FMT_MASK (3 << 29)
+#define S5P_CITRGFMT_HSIZE_MASK (0xfff << 16)
+#define S5P_CITRGFMT_FLIP_SHIFT (14)
+#define S5P_CITRGFMT_FLIP_NORMAL (0 << 14)
+#define S5P_CITRGFMT_FLIP_X_MIRROR (1 << 14)
+#define S5P_CITRGFMT_FLIP_Y_MIRROR (2 << 14)
+#define S5P_CITRGFMT_FLIP_180 (3 << 14)
+#define S5P_CITRGFMT_FLIP_MASK (3 << 14)
+#define S5P_CITRGFMT_OUTROT90 (1 << 13)
+#define S5P_CITRGFMT_VSIZE_MASK (0xfff << 0)
+#define S5P_CITRGFMT_HSIZE(x) ((x) << 16)
+#define S5P_CITRGFMT_VSIZE(x) ((x) << 0)
+
+/* Output DMA control */
+#define S5P_CIOCTRL 0x4c
+#define S5P_CIOCTRL_ORDER422_MASK (3 << 0)
+#define S5P_CIOCTRL_ORDER422_CRYCBY (0 << 0)
+#define S5P_CIOCTRL_ORDER422_YCRYCB (1 << 0)
+#define S5P_CIOCTRL_ORDER422_CBYCRY (2 << 0)
+#define S5P_CIOCTRL_ORDER422_YCBYCR (3 << 0)
+#define S5P_CIOCTRL_LASTIRQ_ENABLE (1 << 2)
+#define S5P_CIOCTRL_YCBCR_3PLANE (0 << 3)
+#define S5P_CIOCTRL_YCBCR_2PLANE (1 << 3)
+#define S5P_CIOCTRL_YCBCR_PLANE_MASK (1 << 3)
+#define S5P_CIOCTRL_ORDER2P_SHIFT (24)
+#define S5P_CIOCTRL_ORDER2P_MASK (3 << 24)
+#define S5P_CIOCTRL_ORDER422_2P_LSB_CRCB (0 << 24)
+
+/* Pre-scaler control 1 */
+#define S5P_CISCPRERATIO 0x50
+#define S5P_CISCPRERATIO_SHFACTOR(x) ((x) << 28)
+#define S5P_CISCPRERATIO_HOR(x) ((x) << 16)
+#define S5P_CISCPRERATIO_VER(x) ((x) << 0)
+
+#define S5P_CISCPREDST 0x54
+#define S5P_CISCPREDST_WIDTH(x) ((x) << 16)
+#define S5P_CISCPREDST_HEIGHT(x) ((x) << 0)
+
+/* Main scaler control */
+#define S5P_CISCCTRL 0x58
+#define S5P_CISCCTRL_SCALERBYPASS (1 << 31)
+#define S5P_CISCCTRL_SCALEUP_H (1 << 30)
+#define S5P_CISCCTRL_SCALEUP_V (1 << 29)
+#define S5P_CISCCTRL_CSCR2Y_WIDE (1 << 28)
+#define S5P_CISCCTRL_CSCY2R_WIDE (1 << 27)
+#define S5P_CISCCTRL_LCDPATHEN_FIFO (1 << 26)
+#define S5P_CISCCTRL_INTERLACE (1 << 25)
+#define S5P_CISCCTRL_SCALERSTART (1 << 15)
+#define S5P_CISCCTRL_INRGB_FMT_RGB565 (0 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_RGB666 (1 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_RGB888 (2 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_MASK (3 << 13)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB565 (0 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB666 (1 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB888 (2 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_MASK (3 << 11)
+#define S5P_CISCCTRL_RGB_EXT (1 << 10)
+#define S5P_CISCCTRL_ONE2ONE (1 << 9)
+#define S5P_CISCCTRL_SC_HORRATIO(x) ((x) << 16)
+#define S5P_CISCCTRL_SC_VERRATIO(x) ((x) << 0)
+
+/* Target area */
+#define S5P_CITAREA 0x5c
+#define S5P_CITAREA_MASK 0x0fffffff
+
+/* General status */
+#define S5P_CISTATUS 0x64
+#define S5P_CISTATUS_OVFIY (1 << 31)
+#define S5P_CISTATUS_OVFICB (1 << 30)
+#define S5P_CISTATUS_OVFICR (1 << 29)
+#define S5P_CISTATUS_VSYNC (1 << 28)
+#define S5P_CISTATUS_WINOFF_EN (1 << 25)
+#define S5P_CISTATUS_IMGCPT_EN (1 << 22)
+#define S5P_CISTATUS_IMGCPT_SCEN (1 << 21)
+#define S5P_CISTATUS_VSYNC_A (1 << 20)
+#define S5P_CISTATUS_VSYNC_B (1 << 19)
+#define S5P_CISTATUS_OVRLB (1 << 18)
+#define S5P_CISTATUS_FRAME_END (1 << 17)
+#define S5P_CISTATUS_LASTCAPT_END (1 << 16)
+#define S5P_CISTATUS_VVALID_A (1 << 15)
+#define S5P_CISTATUS_VVALID_B (1 << 14)
+
+/* Image capture control */
+#define S5P_CIIMGCPT 0xc0
+#define S5P_CIIMGCPT_IMGCPTEN (1 << 31)
+#define S5P_CIIMGCPT_IMGCPTEN_SC (1 << 30)
+#define S5P_CIIMGCPT_CPT_FREN_ENABLE (1 << 25)
+#define S5P_CIIMGCPT_CPT_FRMOD_CNT (1 << 18)
+
+/* Frame capture sequence */
+#define S5P_CICPTSEQ 0xc4
+
+/* Image effect */
+#define S5P_CIIMGEFF 0xd0
+#define S5P_CIIMGEFF_IE_DISABLE (0 << 30)
+#define S5P_CIIMGEFF_IE_ENABLE (1 << 30)
+#define S5P_CIIMGEFF_IE_SC_BEFORE (0 << 29)
+#define S5P_CIIMGEFF_IE_SC_AFTER (1 << 29)
+#define S5P_CIIMGEFF_FIN_BYPASS (0 << 26)
+#define S5P_CIIMGEFF_FIN_ARBITRARY (1 << 26)
+#define S5P_CIIMGEFF_FIN_NEGATIVE (2 << 26)
+#define S5P_CIIMGEFF_FIN_ARTFREEZE (3 << 26)
+#define S5P_CIIMGEFF_FIN_EMBOSSING (4 << 26)
+#define S5P_CIIMGEFF_FIN_SILHOUETTE (5 << 26)
+#define S5P_CIIMGEFF_FIN_MASK (7 << 26)
+#define S5P_CIIMGEFF_PAT_CBCR_MASK ((0xff < 13) | (0xff < 0))
+#define S5P_CIIMGEFF_PAT_CB(x) ((x) << 13)
+#define S5P_CIIMGEFF_PAT_CR(x) ((x) << 0)
+
+/* Input DMA Y/Cb/Cr plane start address 0 */
+#define S5P_CIIYSA0 0xd4
+#define S5P_CIICBSA0 0xd8
+#define S5P_CIICRSA0 0xdc
+
+/* Real input DMA image size */
+#define S5P_CIREAL_ISIZE 0xf8
+#define S5P_CIREAL_ISIZE_AUTOLOAD_EN (1 << 31)
+#define S5P_CIREAL_ISIZE_ADDR_CH_DIS (1 << 30)
+#define S5P_CIREAL_ISIZE_HEIGHT(x) ((x) << 16)
+#define S5P_CIREAL_ISIZE_WIDTH(x) ((x) << 0)
+
+
+/* Input DMA control */
+#define S5P_MSCTRL 0xfc
+#define S5P_MSCTRL_IN_BURST_COUNT_MASK (3 << 24)
+#define S5P_MSCTRL_2P_IN_ORDER_MASK (3 << 16)
+#define S5P_MSCTRL_2P_IN_ORDER_SHIFT 16
+#define S5P_MSCTRL_C_INT_IN_3PLANE (0 << 15)
+#define S5P_MSCTRL_C_INT_IN_2PLANE (1 << 15)
+#define S5P_MSCTRL_C_INT_IN_MASK (1 << 15)
+#define S5P_MSCTRL_FLIP_SHIFT 13
+#define S5P_MSCTRL_FLIP_MASK (3 << 13)
+#define S5P_MSCTRL_FLIP_NORMAL (0 << 13)
+#define S5P_MSCTRL_FLIP_X_MIRROR (1 << 13)
+#define S5P_MSCTRL_FLIP_Y_MIRROR (2 << 13)
+#define S5P_MSCTRL_FLIP_180 (3 << 13)
+#define S5P_MSCTRL_ORDER422_SHIFT 4
+#define S5P_MSCTRL_ORDER422_CRYCBY (0 << 4)
+#define S5P_MSCTRL_ORDER422_YCRYCB (1 << 4)
+#define S5P_MSCTRL_ORDER422_CBYCRY (2 << 4)
+#define S5P_MSCTRL_ORDER422_YCBYCR (3 << 4)
+#define S5P_MSCTRL_ORDER422_MASK (3 << 4)
+#define S5P_MSCTRL_INPUT_EXTCAM (0 << 3)
+#define S5P_MSCTRL_INPUT_MEMORY (1 << 3)
+#define S5P_MSCTRL_INPUT_MASK (1 << 3)
+#define S5P_MSCTRL_INFORMAT_YCBCR420 (0 << 1)
+#define S5P_MSCTRL_INFORMAT_YCBCR422 (1 << 1)
+#define S5P_MSCTRL_INFORMAT_YCBCR422_1P (2 << 1)
+#define S5P_MSCTRL_INFORMAT_RGB (3 << 1)
+#define S5P_MSCTRL_INFORMAT_MASK (3 << 1)
+#define S5P_MSCTRL_ENVID (1 << 0)
+#define S5P_MSCTRL_FRAME_COUNT(x) ((x) << 24)
+
+/* Input DMA Y/Cb/Cr plane start address 1 */
+#define S5P_CIIYSA1 0x144
+#define S5P_CIICBSA1 0x148
+#define S5P_CIICRSA1 0x14c
+
+/* Output DMA Y/Cb/Cr offset */
+#define S5P_CIOYOFF 0x168
+#define S5P_CIOCBOFF 0x16c
+#define S5P_CIOCROFF 0x170
+
+/* Input DMA Y/Cb/Cr offset */
+#define S5P_CIIYOFF 0x174
+#define S5P_CIICBOFF 0x178
+#define S5P_CIICROFF 0x17c
+
+#define S5P_CIO_OFFS_VER(x) ((x) << 16)
+#define S5P_CIO_OFFS_HOR(x) ((x) << 0)
+
+/* Input DMA original image size */
+#define S5P_ORGISIZE 0x180
+
+/* Output DMA original image size */
+#define S5P_ORGOSIZE 0x184
+
+#define S5P_ORIG_SIZE_VER(x) ((x) << 16)
+#define S5P_ORIG_SIZE_HOR(x) ((x) << 0)
+
+/* Real output DMA image size (extension register) */
+#define S5P_CIEXTEN 0x188
+
+#define S5P_CIDMAPARAM 0x18c
+#define S5P_CIDMAPARAM_R_LINEAR (0 << 29)
+#define S5P_CIDMAPARAM_R_64X32 (3 << 29)
+#define S5P_CIDMAPARAM_W_LINEAR (0 << 13)
+#define S5P_CIDMAPARAM_W_64X32 (3 << 13)
+#define S5P_CIDMAPARAM_TILE_MASK ((3 << 29) | (3 << 13))
+
+/* MIPI CSI image format */
+#define S5P_CSIIMGFMT 0x194
+
+#endif /* REGS_FIMC_H_ */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 047f7e6edb86f..61490c6dcdbdd 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -277,6 +277,7 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */
#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */
#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */
+#define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */
#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */
#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */
#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */
--
GitLab
From fe988f56c7c1bff52a4c26164ceb3dbd582de433 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Thu, 29 Jul 2010 02:46:02 -0300
Subject: [PATCH 485/863] V4L/DVB: gspca - main: Fix a crash in
gspca_frame_add()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some webcams as ov511 may find many times an end of image.
In this case, with the last patch in image concatenation
(commit 799b1bd41f398054d46fd35f73abd01c4009f6ca),
the image pointer was NULL and the system crashed in memcpy().
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/gspca.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 0004469691cc5..b9846106913eb 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -440,10 +440,15 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
frame->v4l2_buf.sequence = ++gspca_dev->sequence;
gspca_dev->image = frame->data;
gspca_dev->image_len = 0;
- } else if (gspca_dev->last_packet_type == DISCARD_PACKET) {
- if (packet_type == LAST_PACKET)
- gspca_dev->last_packet_type = packet_type;
- return;
+ } else {
+ switch (gspca_dev->last_packet_type) {
+ case DISCARD_PACKET:
+ if (packet_type == LAST_PACKET)
+ gspca_dev->last_packet_type = packet_type;
+ return;
+ case LAST_PACKET:
+ return;
+ }
}
/* append the packet to the frame buffer */
@@ -454,6 +459,12 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
gspca_dev->frsz);
packet_type = DISCARD_PACKET;
} else {
+/* !! image is NULL only when last pkt is LAST or DISCARD
+ if (gspca_dev->image == NULL) {
+ err("gspca_frame_add() image == NULL");
+ return;
+ }
+ */
memcpy(gspca_dev->image + gspca_dev->image_len,
data, len);
gspca_dev->image_len += len;
--
GitLab
From 83d1aa3d21ce50b9bc3b503ce2b1e7bb718709f1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Wed, 4 Aug 2010 05:11:23 -0300
Subject: [PATCH 486/863] V4L/DVB: gspca - zc3xx: Cleanup source
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
- use an enum to define the sensor numbers
- use the sensor numbers to index the associated tables
- rename TAS5130CXX to TAS5130C
- rename HV7131C to HV7131R
- change some comments
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/zc3xx.c | 385 ++++++++++++++++--------------
1 file changed, 200 insertions(+), 185 deletions(-)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 4473f0fb8b73b..e184eb3b8c73a 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -21,7 +21,9 @@
#define MODULE_NAME "zc3xx"
+#ifdef CONFIG_INPUT
#include <linux/input.h>
+#endif
#include "gspca.h"
#include "jpeg.h"
@@ -51,32 +53,32 @@ struct sd {
#define QUALITY_DEF 70
u8 sensor; /* Type of image sensor chip */
-/* !! values used in different tables */
-#define SENSOR_ADCM2700 0
-#define SENSOR_CS2102 1
-#define SENSOR_CS2102K 2
-#define SENSOR_GC0305 3
-#define SENSOR_HDCS2020b 4
-#define SENSOR_HV7131B 5
-#define SENSOR_HV7131C 6
-#define SENSOR_ICM105A 7
-#define SENSOR_MC501CB 8
-#define SENSOR_MI0360SOC 9
-#define SENSOR_OV7620 10
-/*#define SENSOR_OV7648 10 - same values */
-#define SENSOR_OV7630C 11
-#define SENSOR_PAS106 12
-#define SENSOR_PAS202B 13
-#define SENSOR_PB0330 14 /* (MI0360) */
-#define SENSOR_PO2030 15
-#define SENSOR_TAS5130CK 16
-#define SENSOR_TAS5130CXX 17
-#define SENSOR_TAS5130C_VF0250 18
-#define SENSOR_MAX 19
- unsigned short chip_revision;
+ u16 chip_revision;
u8 jpeg_hdr[JPEG_HDR_SZ];
};
+enum sensors {
+ SENSOR_ADCM2700,
+ SENSOR_CS2102,
+ SENSOR_CS2102K,
+ SENSOR_GC0305,
+ SENSOR_HDCS2020b,
+ SENSOR_HV7131B,
+ SENSOR_HV7131R,
+ SENSOR_ICM105A,
+ SENSOR_MC501CB,
+ SENSOR_MI0360SOC, /* = MT9V111 */
+ SENSOR_OV7620, /* OV7648 - same values */
+ SENSOR_OV7630C,
+ SENSOR_PAS106,
+ SENSOR_PAS202B,
+ SENSOR_PB0330,
+ SENSOR_PO2030,
+ SENSOR_TAS5130CK,
+ SENSOR_TAS5130C,
+ SENSOR_TAS5130C_VF0250,
+ SENSOR_MAX
+};
/* V4L2 controls supported by the driver */
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
@@ -3350,7 +3352,7 @@ static const struct usb_action ov7620_NoFliker[] = {
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x01, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,01,cc */
/* {0xa0, 0x44, ZC3XX_R002_CLOCKSELECT}, * 00,02,44,cc
- - if mode1 (320x240) */
+ * if mode1 (320x240) */
/* ?? was
{0xa0, 0x00, 0x0039}, * 00,00,00,dd *
{0xa1, 0x01, 0x0037}, */
@@ -3439,7 +3441,6 @@ static const struct usb_action ov7630c_InitialScale[] = {
{0xa0, 0xf8, ZC3XX_R110_RGB20},
{0xa0, 0xf8, ZC3XX_R111_RGB21},
{0xa0, 0x50, ZC3XX_R112_RGB22},
-/* 0x03, */
{0xa1, 0x01, 0x0008},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
{0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
@@ -3719,7 +3720,7 @@ static const struct usb_action pas106b_InitialScale[] = { /* 176x144 */
{0xaa, 0x0e, 0x0002},
{0xaa, 0x14, 0x0081},
-/* Other registors */
+/* Other registers */
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
/* Frame retreiving */
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
@@ -3730,7 +3731,7 @@ static const struct usb_action pas106b_InitialScale[] = { /* 176x144 */
/* Sharpness */
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
-/* Other registors */
+/* Other registers */
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
/* Auto exposure and white balance */
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
@@ -3837,7 +3838,7 @@ static const struct usb_action pas106b_Initial[] = { /* 352x288 */
{0xaa, 0x0e, 0x0002},
{0xaa, 0x14, 0x0081},
-/* Other registors */
+/* Other registers */
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
/* Frame retreiving */
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
@@ -3848,7 +3849,7 @@ static const struct usb_action pas106b_Initial[] = { /* 352x288 */
/* Sharpness */
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
-/* Other registors */
+/* Other registers */
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
/* Auto exposure and white balance */
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
@@ -5340,7 +5341,7 @@ static const struct usb_action tas5130cK_Initial[] = {
{}
};
-static const struct usb_action tas5130cxx_InitialScale[] = { /* 320x240 */
+static const struct usb_action tas5130c_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x50, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
@@ -5377,7 +5378,7 @@ static const struct usb_action tas5130cxx_InitialScale[] = { /* 320x240 */
{0xa0, 0x02, ZC3XX_R0A6_EXPOSUREBLACKLVL},
{}
};
-static const struct usb_action tas5130cxx_Initial[] = { /* 640x480 */
+static const struct usb_action tas5130c_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x40, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R008_CLOCKSETTING},
@@ -5413,7 +5414,7 @@ static const struct usb_action tas5130cxx_Initial[] = { /* 640x480 */
{0xa0, 0x02, ZC3XX_R0A6_EXPOSUREBLACKLVL},
{}
};
-static const struct usb_action tas5130cxx_50HZ[] = {
+static const struct usb_action tas5130c_50HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0063}, /* 00,a4,63,aa */
@@ -5438,7 +5439,7 @@ static const struct usb_action tas5130cxx_50HZ[] = {
{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
-static const struct usb_action tas5130cxx_50HZScale[] = {
+static const struct usb_action tas5130c_50HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0077}, /* 00,a4,77,aa */
@@ -5463,7 +5464,7 @@ static const struct usb_action tas5130cxx_50HZScale[] = {
{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
-static const struct usb_action tas5130cxx_60HZ[] = {
+static const struct usb_action tas5130c_60HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0036}, /* 00,a4,36,aa */
@@ -5488,7 +5489,7 @@ static const struct usb_action tas5130cxx_60HZ[] = {
{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
-static const struct usb_action tas5130cxx_60HZScale[] = {
+static const struct usb_action tas5130c_60HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0077}, /* 00,a4,77,aa */
@@ -5513,7 +5514,7 @@ static const struct usb_action tas5130cxx_60HZScale[] = {
{0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
-static const struct usb_action tas5130cxx_NoFliker[] = {
+static const struct usb_action tas5130c_NoFliker[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0040}, /* 00,a4,40,aa */
@@ -5539,7 +5540,7 @@ static const struct usb_action tas5130cxx_NoFliker[] = {
{}
};
-static const struct usb_action tas5130cxx_NoFlikerScale[] = {
+static const struct usb_action tas5130c_NoFlikerScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
{0xaa, 0xa3, 0x0001}, /* 00,a3,01,aa */
{0xaa, 0xa4, 0x0090}, /* 00,a4,90,aa */
@@ -5974,25 +5975,25 @@ static void setmatrix(struct gspca_dev *gspca_dev)
static const u8 vf0250_matrix[9] =
{0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
static const u8 *matrix_tb[SENSOR_MAX] = {
- adcm2700_matrix, /* SENSOR_ADCM2700 0 */
- ov7620_matrix, /* SENSOR_CS2102 1 */
- NULL, /* SENSOR_CS2102K 2 */
- gc0305_matrix, /* SENSOR_GC0305 3 */
- NULL, /* SENSOR_HDCS2020b 4 */
- NULL, /* SENSOR_HV7131B 5 */
- NULL, /* SENSOR_HV7131C 6 */
- NULL, /* SENSOR_ICM105A 7 */
- NULL, /* SENSOR_MC501CB 8 */
- gc0305_matrix, /* SENSOR_MI0360SOC 9 */
- ov7620_matrix, /* SENSOR_OV7620 10 */
- NULL, /* SENSOR_OV7630C 11 */
- NULL, /* SENSOR_PAS106 12 */
- pas202b_matrix, /* SENSOR_PAS202B 13 */
- gc0305_matrix, /* SENSOR_PB0330 14 */
- po2030_matrix, /* SENSOR_PO2030 15 */
- NULL, /* SENSOR_TAS5130CK 16 */
- tas5130c_matrix, /* SENSOR_TAS5130CXX 17 */
- vf0250_matrix, /* SENSOR_TAS5130C_VF0250 18 */
+ [SENSOR_ADCM2700] = adcm2700_matrix,
+ [SENSOR_CS2102] = ov7620_matrix,
+ [SENSOR_CS2102K] = NULL,
+ [SENSOR_GC0305] = gc0305_matrix,
+ [SENSOR_HDCS2020b] = NULL,
+ [SENSOR_HV7131B] = NULL,
+ [SENSOR_HV7131R] = NULL,
+ [SENSOR_ICM105A] = po2030_matrix,
+ [SENSOR_MC501CB] = NULL,
+ [SENSOR_MI0360SOC] = gc0305_matrix,
+ [SENSOR_OV7620] = ov7620_matrix,
+ [SENSOR_OV7630C] = NULL,
+ [SENSOR_PAS106] = NULL,
+ [SENSOR_PAS202B] = pas202b_matrix,
+ [SENSOR_PB0330] = gc0305_matrix,
+ [SENSOR_PO2030] = po2030_matrix,
+ [SENSOR_TAS5130CK] = NULL,
+ [SENSOR_TAS5130C] = tas5130c_matrix,
+ [SENSOR_TAS5130C_VF0250] = vf0250_matrix,
};
matrix = matrix_tb[sd->sensor];
@@ -6124,79 +6125,79 @@ static int setlightfreq(struct gspca_dev *gspca_dev)
int i, mode;
const struct usb_action *zc3_freq;
static const struct usb_action *freq_tb[SENSOR_MAX][6] = {
-/* SENSOR_ADCM2700 0 */
+ [SENSOR_ADCM2700] =
{adcm2700_NoFliker, adcm2700_NoFliker,
adcm2700_50HZ, adcm2700_50HZ,
adcm2700_60HZ, adcm2700_60HZ},
-/* SENSOR_CS2102 1 */
+ [SENSOR_CS2102] =
{cs2102_NoFliker, cs2102_NoFlikerScale,
cs2102_50HZ, cs2102_50HZScale,
cs2102_60HZ, cs2102_60HZScale},
-/* SENSOR_CS2102K 2 */
+ [SENSOR_CS2102K] =
{cs2102_NoFliker, cs2102_NoFlikerScale,
NULL, NULL, /* currently disabled */
NULL, NULL},
-/* SENSOR_GC0305 3 */
+ [SENSOR_GC0305] =
{gc0305_NoFliker, gc0305_NoFliker,
gc0305_50HZ, gc0305_50HZ,
gc0305_60HZ, gc0305_60HZ},
-/* SENSOR_HDCS2020b 4 */
+ [SENSOR_HDCS2020b] =
{hdcs2020b_NoFliker, hdcs2020b_NoFliker,
hdcs2020b_50HZ, hdcs2020b_50HZ,
hdcs2020b_60HZ, hdcs2020b_60HZ},
-/* SENSOR_HV7131B 5 */
+ [SENSOR_HV7131B] =
{hv7131b_NoFliker, hv7131b_NoFlikerScale,
hv7131b_50HZ, hv7131b_50HZScale,
hv7131b_60HZ, hv7131b_60HZScale},
-/* SENSOR_HV7131C 6 */
+ [SENSOR_HV7131R] =
{NULL, NULL,
NULL, NULL,
NULL, NULL},
-/* SENSOR_ICM105A 7 */
+ [SENSOR_ICM105A] =
{icm105a_NoFliker, icm105a_NoFlikerScale,
icm105a_50HZ, icm105a_50HZScale,
icm105a_60HZ, icm105a_60HZScale},
-/* SENSOR_MC501CB 8 */
+ [SENSOR_MC501CB] =
{mc501cb_NoFliker, mc501cb_NoFlikerScale,
mc501cb_50HZ, mc501cb_50HZScale,
mc501cb_60HZ, mc501cb_60HZScale},
-/* SENSOR_MI0360SOC 9 */
+ [SENSOR_MI0360SOC] =
{mi360soc_AENoFliker, mi360soc_AENoFlikerScale,
mi360soc_AE50HZ, mi360soc_AE50HZScale,
mi360soc_AE60HZ, mi360soc_AE60HZScale},
-/* SENSOR_OV7620 10 */
+ [SENSOR_OV7620] =
{ov7620_NoFliker, ov7620_NoFliker,
ov7620_50HZ, ov7620_50HZ,
ov7620_60HZ, ov7620_60HZ},
-/* SENSOR_OV7630C 11 */
+ [SENSOR_OV7630C] =
{NULL, NULL,
NULL, NULL,
NULL, NULL},
-/* SENSOR_PAS106 12 */
+ [SENSOR_PAS106] =
{pas106b_NoFliker, pas106b_NoFliker,
pas106b_50HZ, pas106b_50HZ,
pas106b_60HZ, pas106b_60HZ},
-/* SENSOR_PAS202B 13 */
+ [SENSOR_PAS202B] =
{pas202b_NoFliker, pas202b_NoFlikerScale,
pas202b_50HZ, pas202b_50HZScale,
pas202b_60HZ, pas202b_60HZScale},
-/* SENSOR_PB0330 14 */
+ [SENSOR_PB0330] =
{pb0330_NoFliker, pb0330_NoFlikerScale,
pb0330_50HZ, pb0330_50HZScale,
pb0330_60HZ, pb0330_60HZScale},
-/* SENSOR_PO2030 15 */
+ [SENSOR_PO2030] =
{po2030_NoFliker, po2030_NoFliker,
po2030_50HZ, po2030_50HZ,
po2030_60HZ, po2030_60HZ},
-/* SENSOR_TAS5130CK 16 */
- {tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
- tas5130cxx_50HZ, tas5130cxx_50HZScale,
- tas5130cxx_60HZ, tas5130cxx_60HZScale},
-/* SENSOR_TAS5130CXX 17 */
- {tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
- tas5130cxx_50HZ, tas5130cxx_50HZScale,
- tas5130cxx_60HZ, tas5130cxx_60HZScale},
-/* SENSOR_TAS5130C_VF0250 18 */
+ [SENSOR_TAS5130CK] =
+ {tas5130c_NoFliker, tas5130c_NoFlikerScale,
+ tas5130c_50HZ, tas5130c_50HZScale,
+ tas5130c_60HZ, tas5130c_60HZScale},
+ [SENSOR_TAS5130C] =
+ {tas5130c_NoFliker, tas5130c_NoFlikerScale,
+ tas5130c_50HZ, tas5130c_50HZScale,
+ tas5130c_60HZ, tas5130c_60HZScale},
+ [SENSOR_TAS5130C_VF0250] =
{tas5130c_vf0250_NoFliker, tas5130c_vf0250_NoFlikerScale,
tas5130c_vf0250_50HZ, tas5130c_vf0250_50HZScale,
tas5130c_vf0250_60HZ, tas5130c_vf0250_60HZScale},
@@ -6207,27 +6208,27 @@ static int setlightfreq(struct gspca_dev *gspca_dev)
if (mode)
i++; /* 320x240 */
zc3_freq = freq_tb[sd->sensor][i];
- if (zc3_freq != NULL) {
- usb_exchange(gspca_dev, zc3_freq);
- switch (sd->sensor) {
- case SENSOR_GC0305:
- if (mode /* if 320x240 */
- && sd->lightfreq == 1) /* and 50Hz */
- reg_w(gspca_dev->dev, 0x85, 0x018d);
- /* win: 0x80, 0x018d */
- break;
- case SENSOR_OV7620:
- if (!mode) { /* if 640x480 */
- if (sd->lightfreq != 0) /* and 50 or 60 Hz */
- reg_w(gspca_dev->dev, 0x40, 0x0002);
- else
- reg_w(gspca_dev->dev, 0x44, 0x0002);
- }
- break;
- case SENSOR_PAS202B:
- reg_w(gspca_dev->dev, 0x00, 0x01a7);
- break;
+ if (zc3_freq == NULL)
+ return 0;
+ usb_exchange(gspca_dev, zc3_freq);
+ switch (sd->sensor) {
+ case SENSOR_GC0305:
+ if (mode /* if 320x240 */
+ && sd->lightfreq == 1) /* and 50Hz */
+ reg_w(gspca_dev->dev, 0x85, 0x018d);
+ /* win: 0x80, 0x018d */
+ break;
+ case SENSOR_OV7620:
+ if (!mode) { /* if 640x480 */
+ if (sd->lightfreq != 0) /* and 50 or 60 Hz */
+ reg_w(gspca_dev->dev, 0x40, 0x0002);
+ else
+ reg_w(gspca_dev->dev, 0x44, 0x0002);
}
+ break;
+ case SENSOR_PAS202B:
+ reg_w(gspca_dev->dev, 0x00, 0x01a7);
+ break;
}
return 0;
}
@@ -6442,17 +6443,14 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
retword |= reg_r(gspca_dev, 0x000a);
PDEBUG(D_PROBE, "probe 3wr vga 1 0x%04x", retword);
reg_r(gspca_dev, 0x0010);
- /* value 0x4001 is meaningless */
- if (retword != 0x4001) {
- if ((retword & 0xff00) == 0x6400)
- return 0x02; /* TAS5130C */
- for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
- if (chipset_revision_sensor[i].revision == retword) {
- sd->chip_revision = retword;
- send_unknown(dev, SENSOR_PB0330);
- return chipset_revision_sensor[i]
- .internal_sensor_id;
- }
+ if ((retword & 0xff00) == 0x6400)
+ return 0x02; /* TAS5130C */
+ for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
+ if (chipset_revision_sensor[i].revision == retword) {
+ sd->chip_revision = retword;
+ send_unknown(dev, SENSOR_PB0330);
+ return chipset_revision_sensor[i]
+ .internal_sensor_id;
}
}
@@ -6464,7 +6462,7 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
reg_w(dev, 0x01, 0x0012);
retword = i2c_read(gspca_dev, 0x00);
if (retword != 0) {
- PDEBUG(D_PROBE, "probe 3wr vga type 0a ?");
+ PDEBUG(D_PROBE, "probe 3wr vga type 0a");
return 0x0a; /* PB0330 */
}
@@ -6563,46 +6561,46 @@ static int sd_config(struct gspca_dev *gspca_dev,
struct cam *cam;
int sensor;
static const u8 gamma[SENSOR_MAX] = {
- 4, /* SENSOR_ADCM2700 0 */
- 4, /* SENSOR_CS2102 1 */
- 5, /* SENSOR_CS2102K 2 */
- 4, /* SENSOR_GC0305 3 */
- 4, /* SENSOR_HDCS2020b 4 */
- 4, /* SENSOR_HV7131B 5 */
- 4, /* SENSOR_HV7131C 6 */
- 4, /* SENSOR_ICM105A 7 */
- 4, /* SENSOR_MC501CB 8 */
- 4, /* SENSOR_MI0360SOC 9 */
- 3, /* SENSOR_OV7620 10 */
- 4, /* SENSOR_OV7630C 11 */
- 4, /* SENSOR_PAS106 12 */
- 4, /* SENSOR_PAS202B 13 */
- 4, /* SENSOR_PB0330 14 */
- 4, /* SENSOR_PO2030 15 */
- 4, /* SENSOR_TAS5130CK 16 */
- 3, /* SENSOR_TAS5130CXX 17 */
- 3, /* SENSOR_TAS5130C_VF0250 18 */
+ [SENSOR_ADCM2700] = 4,
+ [SENSOR_CS2102] = 4,
+ [SENSOR_CS2102K] = 5,
+ [SENSOR_GC0305] = 4,
+ [SENSOR_HDCS2020b] = 4,
+ [SENSOR_HV7131B] = 4,
+ [SENSOR_HV7131R] = 4,
+ [SENSOR_ICM105A] = 4,
+ [SENSOR_MC501CB] = 4,
+ [SENSOR_MI0360SOC] = 4,
+ [SENSOR_OV7620] = 3,
+ [SENSOR_OV7630C] = 4,
+ [SENSOR_PAS106] = 4,
+ [SENSOR_PAS202B] = 4,
+ [SENSOR_PB0330] = 4,
+ [SENSOR_PO2030] = 4,
+ [SENSOR_TAS5130CK] = 4,
+ [SENSOR_TAS5130C] = 3,
+ [SENSOR_TAS5130C_VF0250] = 3,
};
static const u8 mode_tb[SENSOR_MAX] = {
- 2, /* SENSOR_ADCM2700 0 */
- 1, /* SENSOR_CS2102 1 */
- 1, /* SENSOR_CS2102K 2 */
- 1, /* SENSOR_GC0305 3 */
- 1, /* SENSOR_HDCS2020b 4 */
- 1, /* SENSOR_HV7131B 5 */
- 1, /* SENSOR_HV7131C 6 */
- 1, /* SENSOR_ICM105A 7 */
- 2, /* SENSOR_MC501CB 8 */
- 1, /* SENSOR_MI0360SOC 9 */
- 2, /* SENSOR_OV7620 10 */
- 1, /* SENSOR_OV7630C 11 */
- 0, /* SENSOR_PAS106 12 */
- 1, /* SENSOR_PAS202B 13 */
- 1, /* SENSOR_PB0330 14 */
- 1, /* SENSOR_PO2030 15 */
- 1, /* SENSOR_TAS5130CK 16 */
- 1, /* SENSOR_TAS5130CXX 17 */
- 1, /* SENSOR_TAS5130C_VF0250 18 */
+ [SENSOR_ADCM2700] = 2,
+ [SENSOR_CS2102] = 1,
+ [SENSOR_CS2102K] = 1,
+ [SENSOR_GC0305] = 1,
+ [SENSOR_HDCS2020b] = 1,
+ [SENSOR_HV7131B] = 1,
+ [SENSOR_HV7131R] = 1,
+ [SENSOR_ICM105A] = 1,
+ [SENSOR_MC501CB] = 2,
+ [SENSOR_MI0360SOC] = 1,
+ [SENSOR_OV7620] = 2,
+ [SENSOR_OV7630C] = 1,
+ [SENSOR_PAS106] = 0,
+ [SENSOR_PAS202B] = 1,
+ [SENSOR_PB0330] = 1,
+ [SENSOR_PO2030] = 1,
+ [SENSOR_TAS5130CK] = 1,
+ [SENSOR_TAS5130C] = 1,
+ [SENSOR_TAS5130C_VF0250] = 1,
};
/* define some sensors from the vendor/product */
@@ -6626,8 +6624,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
break;
default:
PDEBUG(D_PROBE,
- "Sensor UNKNOWN_0 force Tas5130");
- sd->sensor = SENSOR_TAS5130CXX;
+ "Unknown sensor - set to TAS5130C");
+ sd->sensor = SENSOR_TAS5130C;
}
break;
case 0:
@@ -6642,14 +6640,14 @@ static int sd_config(struct gspca_dev *gspca_dev,
break;
default:
/* case 2: * hv7131r */
- PDEBUG(D_PROBE, "Find Sensor HV7131R(c)");
- sd->sensor = SENSOR_HV7131C;
+ PDEBUG(D_PROBE, "Find Sensor HV7131R");
+ sd->sensor = SENSOR_HV7131R;
break;
}
break;
case 0x02:
PDEBUG(D_PROBE, "Sensor TAS5130C");
- sd->sensor = SENSOR_TAS5130CXX;
+ sd->sensor = SENSOR_TAS5130C;
break;
case 0x04:
PDEBUG(D_PROBE, "Find Sensor CS2102");
@@ -6681,11 +6679,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
case 0x10:
case 0x12:
PDEBUG(D_PROBE, "Find Sensor TAS5130C");
- sd->sensor = SENSOR_TAS5130CXX;
+ sd->sensor = SENSOR_TAS5130C;
break;
case 0x11:
- PDEBUG(D_PROBE, "Find Sensor HV7131R(c)");
- sd->sensor = SENSOR_HV7131C;
+ PDEBUG(D_PROBE, "Find Sensor HV7131R");
+ sd->sensor = SENSOR_HV7131R;
break;
case 0x13:
PDEBUG(D_PROBE,
@@ -6772,7 +6770,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
switch (sd->sensor) {
case SENSOR_HV7131B:
- case SENSOR_HV7131C:
+ case SENSOR_HV7131R:
case SENSOR_OV7630C:
gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
break;
@@ -6795,26 +6793,44 @@ static int sd_start(struct gspca_dev *gspca_dev)
struct usb_device *dev = gspca_dev->dev;
int mode;
static const struct usb_action *init_tb[SENSOR_MAX][2] = {
- {adcm2700_Initial, adcm2700_InitialScale}, /* 0 */
- {cs2102_Initial, cs2102_InitialScale}, /* 1 */
- {cs2102K_Initial, cs2102K_InitialScale}, /* 2 */
- {gc0305_Initial, gc0305_InitialScale}, /* 3 */
- {hdcs2020b_Initial, hdcs2020b_InitialScale}, /* 4 */
- {hv7131b_Initial, hv7131b_InitialScale}, /* 5 */
- {hv7131r_Initial, hv7131r_InitialScale}, /* 6 */
- {icm105a_Initial, icm105a_InitialScale}, /* 7 */
- {mc501cb_Initial, mc501cb_InitialScale}, /* 8 */
- {mi0360soc_Initial, mi0360soc_InitialScale}, /* 9 */
- {ov7620_Initial, ov7620_InitialScale}, /* 10 */
- {ov7630c_Initial, ov7630c_InitialScale}, /* 11 */
- {pas106b_Initial, pas106b_InitialScale}, /* 12 */
- {pas202b_Initial, pas202b_InitialScale}, /* 13 */
- {pb0330_Initial, pb0330_InitialScale}, /* 14 */
- {po2030_Initial, po2030_InitialScale}, /* 15 */
- {tas5130cK_Initial, tas5130cK_InitialScale}, /* 16 */
- {tas5130cxx_Initial, tas5130cxx_InitialScale}, /* 17 */
+ [SENSOR_ADCM2700] =
+ {adcm2700_Initial, adcm2700_InitialScale},
+ [SENSOR_CS2102] =
+ {cs2102_Initial, cs2102_InitialScale},
+ [SENSOR_CS2102K] =
+ {cs2102K_Initial, cs2102K_InitialScale},
+ [SENSOR_GC0305] =
+ {gc0305_Initial, gc0305_InitialScale},
+ [SENSOR_HDCS2020b] =
+ {hdcs2020b_Initial, hdcs2020b_InitialScale},
+ [SENSOR_HV7131B] =
+ {hv7131b_Initial, hv7131b_InitialScale},
+ [SENSOR_HV7131R] =
+ {hv7131r_Initial, hv7131r_InitialScale},
+ [SENSOR_ICM105A] =
+ {icm105a_Initial, icm105a_InitialScale},
+ [SENSOR_MC501CB] =
+ {mc501cb_Initial, mc501cb_InitialScale},
+ [SENSOR_MI0360SOC] =
+ {mi0360soc_Initial, mi0360soc_InitialScale},
+ [SENSOR_OV7620] =
+ {ov7620_Initial, ov7620_InitialScale},
+ [SENSOR_OV7630C] =
+ {ov7630c_Initial, ov7630c_InitialScale},
+ [SENSOR_PAS106] =
+ {pas106b_Initial, pas106b_InitialScale},
+ [SENSOR_PAS202B] =
+ {pas202b_Initial, pas202b_InitialScale},
+ [SENSOR_PB0330] =
+ {pb0330_Initial, pb0330_InitialScale},
+ [SENSOR_PO2030] =
+ {po2030_Initial, po2030_InitialScale},
+ [SENSOR_TAS5130CK] =
+ {tas5130cK_Initial, tas5130cK_InitialScale},
+ [SENSOR_TAS5130C] =
+ {tas5130c_Initial, tas5130c_InitialScale},
+ [SENSOR_TAS5130C_VF0250] =
{tas5130c_vf0250_Initial, tas5130c_vf0250_InitialScale},
- /* 18 */
};
/* create the JPEG header */
@@ -6824,7 +6840,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
switch (sd->sensor) {
- case SENSOR_HV7131C:
+ case SENSOR_HV7131R:
zcxx_probeSensor(gspca_dev);
break;
case SENSOR_PAS106:
@@ -6838,13 +6854,13 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_GC0305:
case SENSOR_OV7620:
case SENSOR_PO2030:
- case SENSOR_TAS5130CXX:
+ case SENSOR_TAS5130C:
case SENSOR_TAS5130C_VF0250:
/* msleep(100); * ?? */
reg_r(gspca_dev, 0x0002); /* --> 0x40 */
reg_w(dev, 0x09, 0x01ad); /* (from win traces) */
reg_w(dev, 0x15, 0x01ae);
- if (sd->sensor == SENSOR_TAS5130CXX)
+ if (sd->sensor == SENSOR_TAS5130C)
break;
reg_w(dev, 0x0d, 0x003a);
reg_w(dev, 0x02, 0x003b);
@@ -6866,7 +6882,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
break;
case SENSOR_PAS202B:
case SENSOR_GC0305:
- case SENSOR_TAS5130CXX:
+ case SENSOR_TAS5130C:
reg_r(gspca_dev, 0x0008);
/* fall thru */
case SENSOR_PO2030:
@@ -6908,7 +6924,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
reg_w(dev, 0x40, 0x0117);
break;
case SENSOR_GC0305:
- case SENSOR_TAS5130CXX:
+ case SENSOR_TAS5130C:
reg_w(dev, 0x09, 0x01ad); /* (from win traces) */
reg_w(dev, 0x15, 0x01ae);
/* fall thru */
@@ -7220,7 +7236,6 @@ static const __devinitdata struct usb_device_id device_table[] = {
{USB_DEVICE(0x10fd, 0x8050)},
{} /* end of entry */
};
-#undef DVNAME
MODULE_DEVICE_TABLE(usb, device_table);
/* -- device connect -- */
--
GitLab
From 6d31450544c75d99e1f4dbb21d5db6b2ca6ada4d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Wed, 4 Aug 2010 05:44:13 -0300
Subject: [PATCH 487/863] V4L/DVB: gspca - zc3xx: Check the USB exchanges
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/zc3xx.c | 329 ++++++++++++++++--------------
1 file changed, 171 insertions(+), 158 deletions(-)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index e184eb3b8c73a..a9af568305ac7 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -5841,13 +5841,22 @@ static const struct usb_action tas5130c_vf0250_NoFliker[] = {
static u8 reg_r_i(struct gspca_dev *gspca_dev,
u16 index)
{
- usb_control_msg(gspca_dev->dev,
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return 0;
+ ret = usb_control_msg(gspca_dev->dev,
usb_rcvctrlpipe(gspca_dev->dev, 0),
0xa1,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x01, /* value */
index, gspca_dev->usb_buf, 1,
500);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_r_i err %d", ret);
+ gspca_dev->usb_err = ret;
+ return 0;
+ }
return gspca_dev->usb_buf[0];
}
@@ -5861,24 +5870,32 @@ static u8 reg_r(struct gspca_dev *gspca_dev,
return ret;
}
-static void reg_w_i(struct usb_device *dev,
+static void reg_w_i(struct gspca_dev *gspca_dev,
u8 value,
u16 index)
{
- usb_control_msg(dev,
- usb_sndctrlpipe(dev, 0),
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
0xa0,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, NULL, 0,
500);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_w_i err %d", ret);
+ gspca_dev->usb_err = ret;
+ }
}
-static void reg_w(struct usb_device *dev,
+static void reg_w(struct gspca_dev *gspca_dev,
u8 value,
u16 index)
{
PDEBUG(D_USBO, "reg w [%04x] = %02x", index, value);
- reg_w_i(dev, value, index);
+ reg_w_i(gspca_dev, value, index);
}
static u16 i2c_read(struct gspca_dev *gspca_dev,
@@ -5887,8 +5904,10 @@ static u16 i2c_read(struct gspca_dev *gspca_dev,
u8 retbyte;
u16 retval;
- reg_w_i(gspca_dev->dev, reg, 0x0092);
- reg_w_i(gspca_dev->dev, 0x02, 0x0090); /* <- read command */
+ if (gspca_dev->usb_err < 0)
+ return 0;
+ reg_w_i(gspca_dev, reg, 0x0092);
+ reg_w_i(gspca_dev, 0x02, 0x0090); /* <- read command */
msleep(20);
retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */
if (retbyte != 0x00)
@@ -5907,10 +5926,12 @@ static u8 i2c_write(struct gspca_dev *gspca_dev,
{
u8 retbyte;
- reg_w_i(gspca_dev->dev, reg, 0x92);
- reg_w_i(gspca_dev->dev, valL, 0x93);
- reg_w_i(gspca_dev->dev, valH, 0x94);
- reg_w_i(gspca_dev->dev, 0x01, 0x90); /* <- write command */
+ if (gspca_dev->usb_err < 0)
+ return 0;
+ reg_w_i(gspca_dev, reg, 0x92);
+ reg_w_i(gspca_dev, valL, 0x93);
+ reg_w_i(gspca_dev, valH, 0x94);
+ reg_w_i(gspca_dev, 0x01, 0x90); /* <- write command */
msleep(1);
retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */
if (retbyte != 0x00)
@@ -5926,7 +5947,7 @@ static void usb_exchange(struct gspca_dev *gspca_dev,
while (action->req) {
switch (action->req) {
case 0xa0: /* write register */
- reg_w(gspca_dev->dev, action->val, action->idx);
+ reg_w(gspca_dev, action->val, action->idx);
break;
case 0xa1: /* read status */
reg_r(gspca_dev, action->idx);
@@ -6000,13 +6021,12 @@ static void setmatrix(struct gspca_dev *gspca_dev)
if (matrix == NULL)
return; /* matrix already loaded */
for (i = 0; i < ARRAY_SIZE(ov7620_matrix); i++)
- reg_w(gspca_dev->dev, matrix[i], 0x010a + i);
+ reg_w(gspca_dev, matrix[i], 0x010a + i);
}
static void setsharpness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
int sharpness;
static const u8 sharpness_tb[][2] = {
{0x02, 0x03},
@@ -6016,17 +6036,16 @@ static void setsharpness(struct gspca_dev *gspca_dev)
};
sharpness = sd->sharpness;
- reg_w(dev, sharpness_tb[sharpness][0], 0x01c6);
+ reg_w(gspca_dev, sharpness_tb[sharpness][0], 0x01c6);
reg_r(gspca_dev, 0x01c8);
reg_r(gspca_dev, 0x01c9);
reg_r(gspca_dev, 0x01ca);
- reg_w(dev, sharpness_tb[sharpness][1], 0x01cb);
+ reg_w(gspca_dev, sharpness_tb[sharpness][1], 0x01cb);
}
static void setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
const u8 *Tgamma;
int g, i, brightness, contrast, adj, gp1, gp2;
u8 gr[16];
@@ -6064,7 +6083,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
g = 0xff;
else if (g < 0)
g = 0;
- reg_w(dev, g, 0x0120 + i); /* gamma */
+ reg_w(gspca_dev, g, 0x0120 + i); /* gamma */
if (contrast > 0)
adj--;
else if (contrast < 0)
@@ -6078,13 +6097,12 @@ static void setcontrast(struct gspca_dev *gspca_dev)
}
gr[15] = (0xff - gp2) / 2;
for (i = 0; i < 16; i++)
- reg_w(dev, gr[i], 0x0130 + i); /* gradient */
+ reg_w(gspca_dev, gr[i], 0x0130 + i); /* gradient */
}
static void setquality(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
u8 frxt;
switch (sd->sensor) {
@@ -6097,9 +6115,9 @@ static void setquality(struct gspca_dev *gspca_dev)
return;
}
/*fixme: is it really 0008 0007 0018 for all other sensors? */
- reg_w(dev, QUANT_VAL, 0x0008);
+ reg_w(gspca_dev, QUANT_VAL, 0x0008);
frxt = 0x30;
- reg_w(dev, frxt, 0x0007);
+ reg_w(gspca_dev, frxt, 0x0007);
#if QUANT_VAL == 0 || QUANT_VAL == 1 || QUANT_VAL == 2
frxt = 0xff;
#elif QUANT_VAL == 3
@@ -6109,7 +6127,7 @@ static void setquality(struct gspca_dev *gspca_dev)
#else
frxt = 0x20;
#endif
- reg_w(dev, frxt, 0x0018);
+ reg_w(gspca_dev, frxt, 0x0018);
}
/* Matches the sensor's internal frame rate to the lighting frequency.
@@ -6117,9 +6135,8 @@ static void setquality(struct gspca_dev *gspca_dev)
* 50Hz, for European and Asian lighting (default)
* 60Hz, for American lighting
* 0 = No Fliker (for outdoore usage)
- * Returns: 0 for success
*/
-static int setlightfreq(struct gspca_dev *gspca_dev)
+static void setlightfreq(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int i, mode;
@@ -6209,28 +6226,27 @@ static int setlightfreq(struct gspca_dev *gspca_dev)
i++; /* 320x240 */
zc3_freq = freq_tb[sd->sensor][i];
if (zc3_freq == NULL)
- return 0;
+ return;
usb_exchange(gspca_dev, zc3_freq);
switch (sd->sensor) {
case SENSOR_GC0305:
if (mode /* if 320x240 */
&& sd->lightfreq == 1) /* and 50Hz */
- reg_w(gspca_dev->dev, 0x85, 0x018d);
+ reg_w(gspca_dev, 0x85, 0x018d);
/* win: 0x80, 0x018d */
break;
case SENSOR_OV7620:
if (!mode) { /* if 640x480 */
if (sd->lightfreq != 0) /* and 50 or 60 Hz */
- reg_w(gspca_dev->dev, 0x40, 0x0002);
+ reg_w(gspca_dev, 0x40, 0x0002);
else
- reg_w(gspca_dev->dev, 0x44, 0x0002);
+ reg_w(gspca_dev, 0x44, 0x0002);
}
break;
case SENSOR_PAS202B:
- reg_w(gspca_dev->dev, 0x00, 0x01a7);
+ reg_w(gspca_dev, 0x00, 0x01a7);
break;
}
- return 0;
}
static void setautogain(struct gspca_dev *gspca_dev)
@@ -6242,17 +6258,17 @@ static void setautogain(struct gspca_dev *gspca_dev)
autoval = 0x42;
else
autoval = 0x02;
- reg_w(gspca_dev->dev, autoval, 0x0180);
+ reg_w(gspca_dev, autoval, 0x0180);
}
-static void send_unknown(struct usb_device *dev, int sensor)
+static void send_unknown(struct gspca_dev *gspca_dev, int sensor)
{
- reg_w(dev, 0x01, 0x0000); /* led off */
+ reg_w(gspca_dev, 0x01, 0x0000); /* led off */
switch (sensor) {
case SENSOR_PAS106:
- reg_w(dev, 0x03, 0x003a);
- reg_w(dev, 0x0c, 0x003b);
- reg_w(dev, 0x08, 0x0038);
+ reg_w(gspca_dev, 0x03, 0x003a);
+ reg_w(gspca_dev, 0x0c, 0x003b);
+ reg_w(gspca_dev, 0x08, 0x0038);
break;
case SENSOR_ADCM2700:
case SENSOR_GC0305:
@@ -6260,27 +6276,27 @@ static void send_unknown(struct usb_device *dev, int sensor)
case SENSOR_MI0360SOC:
case SENSOR_PB0330:
case SENSOR_PO2030:
- reg_w(dev, 0x0d, 0x003a);
- reg_w(dev, 0x02, 0x003b);
- reg_w(dev, 0x00, 0x0038);
+ reg_w(gspca_dev, 0x0d, 0x003a);
+ reg_w(gspca_dev, 0x02, 0x003b);
+ reg_w(gspca_dev, 0x00, 0x0038);
break;
case SENSOR_PAS202B:
- reg_w(dev, 0x03, 0x003b);
- reg_w(dev, 0x0c, 0x003a);
- reg_w(dev, 0x0b, 0x0039);
- reg_w(dev, 0x0b, 0x0038);
+ reg_w(gspca_dev, 0x03, 0x003b);
+ reg_w(gspca_dev, 0x0c, 0x003a);
+ reg_w(gspca_dev, 0x0b, 0x0039);
+ reg_w(gspca_dev, 0x0b, 0x0038);
break;
}
}
/* start probe 2 wires */
-static void start_2wr_probe(struct usb_device *dev, int sensor)
+static void start_2wr_probe(struct gspca_dev *gspca_dev, int sensor)
{
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, sensor, 0x0010);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, sensor, 0x0010);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
/* msleep(2); */
}
@@ -6288,14 +6304,14 @@ static int sif_probe(struct gspca_dev *gspca_dev)
{
u16 checkword;
- start_2wr_probe(gspca_dev->dev, 0x0f); /* PAS106 */
- reg_w(gspca_dev->dev, 0x08, 0x008d);
+ start_2wr_probe(gspca_dev, 0x0f); /* PAS106 */
+ reg_w(gspca_dev, 0x08, 0x008d);
msleep(150);
checkword = ((i2c_read(gspca_dev, 0x00) & 0x0f) << 4)
| ((i2c_read(gspca_dev, 0x01) & 0xf0) >> 4);
PDEBUG(D_PROBE, "probe sif 0x%04x", checkword);
if (checkword == 0x0007) {
- send_unknown(gspca_dev->dev, SENSOR_PAS106);
+ send_unknown(gspca_dev, SENSOR_PAS106);
return 0x0f; /* PAS106 */
}
return -1;
@@ -6303,23 +6319,22 @@ static int sif_probe(struct gspca_dev *gspca_dev)
static int vga_2wr_probe(struct gspca_dev *gspca_dev)
{
- struct usb_device *dev = gspca_dev->dev;
u16 retword;
- start_2wr_probe(dev, 0x00); /* HV7131B */
+ start_2wr_probe(gspca_dev, 0x00); /* HV7131B */
i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0)
return 0x00; /* HV7131B */
- start_2wr_probe(dev, 0x04); /* CS2102 */
+ start_2wr_probe(gspca_dev, 0x04); /* CS2102 */
i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0)
return 0x04; /* CS2102 */
- start_2wr_probe(dev, 0x06); /* OmniVision */
- reg_w(dev, 0x08, 0x008d);
+ start_2wr_probe(gspca_dev, 0x06); /* OmniVision */
+ reg_w(gspca_dev, 0x08, 0x008d);
i2c_write(gspca_dev, 0x11, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x11);
if (retword != 0) {
@@ -6328,14 +6343,14 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
goto ov_check;
}
- start_2wr_probe(dev, 0x08); /* HDCS2020 */
+ start_2wr_probe(gspca_dev, 0x08); /* HDCS2020 */
i2c_write(gspca_dev, 0x1c, 0x00, 0x00);
i2c_write(gspca_dev, 0x15, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x15);
if (retword != 0)
return 0x08; /* HDCS2020 */
- start_2wr_probe(dev, 0x0a); /* PB0330 */
+ start_2wr_probe(gspca_dev, 0x0a); /* PB0330 */
i2c_write(gspca_dev, 0x07, 0xaa, 0xaa);
retword = i2c_read(gspca_dev, 0x07);
if (retword != 0)
@@ -6347,23 +6362,23 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
if (retword != 0)
return 0x0a; /* PB0330 ?? */
- start_2wr_probe(dev, 0x0c); /* ICM105A */
+ start_2wr_probe(gspca_dev, 0x0c); /* ICM105A */
i2c_write(gspca_dev, 0x01, 0x11, 0x00);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0)
return 0x0c; /* ICM105A */
- start_2wr_probe(dev, 0x0e); /* PAS202BCB */
- reg_w(dev, 0x08, 0x008d);
+ start_2wr_probe(gspca_dev, 0x0e); /* PAS202BCB */
+ reg_w(gspca_dev, 0x08, 0x008d);
i2c_write(gspca_dev, 0x03, 0xaa, 0x00);
msleep(50);
retword = i2c_read(gspca_dev, 0x03);
if (retword != 0) {
- send_unknown(dev, SENSOR_PAS202B);
+ send_unknown(gspca_dev, SENSOR_PAS202B);
return 0x0e; /* PAS202BCB */
}
- start_2wr_probe(dev, 0x02); /* TAS5130C */
+ start_2wr_probe(gspca_dev, 0x02); /* TAS5130C */
i2c_write(gspca_dev, 0x01, 0xaa, 0x00);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0)
@@ -6372,20 +6387,20 @@ static int vga_2wr_probe(struct gspca_dev *gspca_dev)
reg_r(gspca_dev, 0x0010); /* ?? */
reg_r(gspca_dev, 0x0010);
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x06, 0x0010); /* OmniVision */
- reg_w(dev, 0xa1, 0x008b);
- reg_w(dev, 0x08, 0x008d);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x06, 0x0010); /* OmniVision */
+ reg_w(gspca_dev, 0xa1, 0x008b);
+ reg_w(gspca_dev, 0x08, 0x008d);
msleep(500);
- reg_w(dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
i2c_write(gspca_dev, 0x12, 0x80, 0x00); /* sensor reset */
retword = i2c_read(gspca_dev, 0x0a) << 8;
retword |= i2c_read(gspca_dev, 0x0b);
PDEBUG(D_PROBE, "probe 2wr ov vga 0x%04x", retword);
switch (retword) {
case 0x7631: /* OV7630C */
- reg_w(dev, 0x06, 0x0010);
+ reg_w(gspca_dev, 0x06, 0x0010);
break;
case 0x7620: /* OV7620 */
case 0x7648: /* OV7648 */
@@ -6413,21 +6428,20 @@ static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
static int vga_3wr_probe(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
int i;
u8 retbyte;
u16 retword;
/*fixme: lack of 8b=b3 (11,12)-> 10, 8b=e0 (14,15,16)-> 12 found in gspcav1*/
- reg_w(dev, 0x02, 0x0010);
+ reg_w(gspca_dev, 0x02, 0x0010);
reg_r(gspca_dev, 0x0010);
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x00, 0x0010);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x91, 0x008b);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
- reg_w(dev, 0x05, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x00, 0x0010);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x91, 0x008b);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x05, 0x0012);
retword = i2c_read(gspca_dev, 0x14);
if (retword != 0)
return 0x11; /* HV7131R */
@@ -6438,7 +6452,7 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
if (retword != 0)
return 0x11; /* HV7131R */
- reg_w(dev, 0x02, 0x0010);
+ reg_w(gspca_dev, 0x02, 0x0010);
retword = reg_r(gspca_dev, 0x000b) << 8;
retword |= reg_r(gspca_dev, 0x000a);
PDEBUG(D_PROBE, "probe 3wr vga 1 0x%04x", retword);
@@ -6448,80 +6462,80 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
if (chipset_revision_sensor[i].revision == retword) {
sd->chip_revision = retword;
- send_unknown(dev, SENSOR_PB0330);
+ send_unknown(gspca_dev, SENSOR_PB0330);
return chipset_revision_sensor[i]
.internal_sensor_id;
}
}
- reg_w(dev, 0x01, 0x0000); /* check PB0330 */
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0xdd, 0x008b);
- reg_w(dev, 0x0a, 0x0010);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000); /* check PB0330 */
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0xdd, 0x008b);
+ reg_w(gspca_dev, 0x0a, 0x0010);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
retword = i2c_read(gspca_dev, 0x00);
if (retword != 0) {
PDEBUG(D_PROBE, "probe 3wr vga type 0a");
return 0x0a; /* PB0330 */
}
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x98, 0x008b);
- reg_w(dev, 0x01, 0x0010);
- reg_w(dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x98, 0x008b);
+ reg_w(gspca_dev, 0x01, 0x0010);
+ reg_w(gspca_dev, 0x03, 0x0012);
msleep(2);
- reg_w(dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
retword = i2c_read(gspca_dev, 0x00);
if (retword != 0) {
PDEBUG(D_PROBE, "probe 3wr vga type %02x", retword);
if (retword == 0x0011) /* VF0250 */
return 0x0250;
if (retword == 0x0029) /* gc0305 */
- send_unknown(dev, SENSOR_GC0305);
+ send_unknown(gspca_dev, SENSOR_GC0305);
return retword;
}
- reg_w(dev, 0x01, 0x0000); /* check OmniVision */
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0xa1, 0x008b);
- reg_w(dev, 0x08, 0x008d);
- reg_w(dev, 0x06, 0x0010);
- reg_w(dev, 0x01, 0x0012);
- reg_w(dev, 0x05, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000); /* check OmniVision */
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0xa1, 0x008b);
+ reg_w(gspca_dev, 0x08, 0x008d);
+ reg_w(gspca_dev, 0x06, 0x0010);
+ reg_w(gspca_dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x05, 0x0012);
if (i2c_read(gspca_dev, 0x1c) == 0x007f /* OV7610 - manufacturer ID */
&& i2c_read(gspca_dev, 0x1d) == 0x00a2) {
- send_unknown(dev, SENSOR_OV7620);
+ send_unknown(gspca_dev, SENSOR_OV7620);
return 0x06; /* OmniVision confirm ? */
}
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x00, 0x0002);
- reg_w(dev, 0x01, 0x0010);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0xee, 0x008b);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
- reg_w(dev, 0x05, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x00, 0x0002);
+ reg_w(gspca_dev, 0x01, 0x0010);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0xee, 0x008b);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x05, 0x0012);
retword = i2c_read(gspca_dev, 0x00) << 8; /* ID 0 */
retword |= i2c_read(gspca_dev, 0x01); /* ID 1 */
PDEBUG(D_PROBE, "probe 3wr vga 2 0x%04x", retword);
if (retword == 0x2030) {
retbyte = i2c_read(gspca_dev, 0x02); /* revision number */
PDEBUG(D_PROBE, "sensor PO2030 rev 0x%02x", retbyte);
- send_unknown(dev, SENSOR_PO2030);
+ send_unknown(gspca_dev, SENSOR_PO2030);
return retword;
}
- reg_w(dev, 0x01, 0x0000);
- reg_w(dev, 0x0a, 0x0010);
- reg_w(dev, 0xd3, 0x008b);
- reg_w(dev, 0x01, 0x0001);
- reg_w(dev, 0x03, 0x0012);
- reg_w(dev, 0x01, 0x0012);
- reg_w(dev, 0x05, 0x0012);
- reg_w(dev, 0xd3, 0x008b);
+ reg_w(gspca_dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x0a, 0x0010);
+ reg_w(gspca_dev, 0xd3, 0x008b);
+ reg_w(gspca_dev, 0x01, 0x0001);
+ reg_w(gspca_dev, 0x03, 0x0012);
+ reg_w(gspca_dev, 0x01, 0x0012);
+ reg_w(gspca_dev, 0x05, 0x0012);
+ reg_w(gspca_dev, 0xd3, 0x008b);
retword = i2c_read(gspca_dev, 0x01);
if (retword != 0) {
PDEBUG(D_PROBE, "probe 3wr vga type 0a ? ret: %04x", retword);
@@ -6739,7 +6753,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
}
if (sensor < 0x20) {
if (sensor == -1 || sensor == 0x10 || sensor == 0x12)
- reg_w(gspca_dev->dev, 0x02, 0x0010);
+ reg_w(gspca_dev, 0x02, 0x0010);
reg_r(gspca_dev, 0x0010);
}
@@ -6776,21 +6790,20 @@ static int sd_config(struct gspca_dev *gspca_dev,
break;
}
- return 0;
+ return gspca_dev->usb_err;
}
/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
/* switch off the led */
- reg_w(gspca_dev->dev, 0x01, 0x0000);
+ reg_w(gspca_dev, 0x01, 0x0000);
return 0;
}
static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
int mode;
static const struct usb_action *init_tb[SENSOR_MAX][2] = {
[SENSOR_ADCM2700] =
@@ -6858,18 +6871,18 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_TAS5130C_VF0250:
/* msleep(100); * ?? */
reg_r(gspca_dev, 0x0002); /* --> 0x40 */
- reg_w(dev, 0x09, 0x01ad); /* (from win traces) */
- reg_w(dev, 0x15, 0x01ae);
+ reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */
+ reg_w(gspca_dev, 0x15, 0x01ae);
if (sd->sensor == SENSOR_TAS5130C)
break;
- reg_w(dev, 0x0d, 0x003a);
- reg_w(dev, 0x02, 0x003b);
- reg_w(dev, 0x00, 0x0038);
+ reg_w(gspca_dev, 0x0d, 0x003a);
+ reg_w(gspca_dev, 0x02, 0x003b);
+ reg_w(gspca_dev, 0x00, 0x0038);
break;
case SENSOR_PAS202B:
- reg_w(dev, 0x03, 0x003b);
- reg_w(dev, 0x0c, 0x003a);
- reg_w(dev, 0x0b, 0x0039);
+ reg_w(gspca_dev, 0x03, 0x003b);
+ reg_w(gspca_dev, 0x0c, 0x003a);
+ reg_w(gspca_dev, 0x0b, 0x0039);
break;
}
@@ -6878,7 +6891,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_ADCM2700:
case SENSOR_OV7620:
reg_r(gspca_dev, 0x0008);
- reg_w(dev, 0x00, 0x0008);
+ reg_w(gspca_dev, 0x00, 0x0008);
break;
case SENSOR_PAS202B:
case SENSOR_GC0305:
@@ -6886,7 +6899,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
reg_r(gspca_dev, 0x0008);
/* fall thru */
case SENSOR_PO2030:
- reg_w(dev, 0x03, 0x0008);
+ reg_w(gspca_dev, 0x03, 0x0008);
break;
}
setsharpness(gspca_dev);
@@ -6907,7 +6920,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_OV7620:
case SENSOR_PAS202B:
reg_r(gspca_dev, 0x0180); /* from win */
- reg_w(dev, 0x00, 0x0180);
+ reg_w(gspca_dev, 0x00, 0x0180);
break;
default:
setquality(gspca_dev);
@@ -6917,29 +6930,29 @@ static int sd_start(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
case SENSOR_ADCM2700:
- reg_w(dev, 0x09, 0x01ad); /* (from win traces) */
- reg_w(dev, 0x15, 0x01ae);
- reg_w(dev, 0x02, 0x0180);
+ reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */
+ reg_w(gspca_dev, 0x15, 0x01ae);
+ reg_w(gspca_dev, 0x02, 0x0180);
/* ms-win + */
- reg_w(dev, 0x40, 0x0117);
+ reg_w(gspca_dev, 0x40, 0x0117);
break;
case SENSOR_GC0305:
case SENSOR_TAS5130C:
- reg_w(dev, 0x09, 0x01ad); /* (from win traces) */
- reg_w(dev, 0x15, 0x01ae);
+ reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */
+ reg_w(gspca_dev, 0x15, 0x01ae);
/* fall thru */
case SENSOR_PAS202B:
case SENSOR_PO2030:
-/* reg_w(dev, 0x40, ZC3XX_R117_GGAIN); * (from win traces) */
+/* reg_w(gspca_dev, 0x40, ZC3XX_R117_GGAIN); * (from win traces) */
reg_r(gspca_dev, 0x0180);
break;
case SENSOR_OV7620:
- reg_w(dev, 0x09, 0x01ad);
- reg_w(dev, 0x15, 0x01ae);
+ reg_w(gspca_dev, 0x09, 0x01ad);
+ reg_w(gspca_dev, 0x15, 0x01ae);
i2c_read(gspca_dev, 0x13); /*fixme: returns 0xa3 */
i2c_write(gspca_dev, 0x13, 0xa3, 0x00);
/*fixme: returned value to send? */
- reg_w(dev, 0x40, 0x0117);
+ reg_w(gspca_dev, 0x40, 0x0117);
reg_r(gspca_dev, 0x0180);
break;
}
@@ -6948,11 +6961,11 @@ static int sd_start(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
case SENSOR_PO2030:
msleep(50);
- reg_w(dev, 0x00, 0x0007); /* (from win traces) */
- reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING);
+ reg_w(gspca_dev, 0x00, 0x0007); /* (from win traces) */
+ reg_w(gspca_dev, 0x02, ZC3XX_R008_CLOCKSETTING);
break;
}
- return 0;
+ return gspca_dev->usb_err;
}
/* called on streamoff with alt 0 and on disconnect */
@@ -6962,7 +6975,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
if (!gspca_dev->present)
return;
- send_unknown(gspca_dev->dev, sd->sensor);
+ send_unknown(gspca_dev, sd->sensor);
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
@@ -6997,7 +7010,7 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
sd->brightness = val;
if (gspca_dev->streaming)
setcontrast(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7015,7 +7028,7 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
sd->contrast = val;
if (gspca_dev->streaming)
setcontrast(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7033,7 +7046,7 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
sd->autogain = val;
if (gspca_dev->streaming)
setautogain(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7051,7 +7064,7 @@ static int sd_setgamma(struct gspca_dev *gspca_dev, __s32 val)
sd->gamma = val;
if (gspca_dev->streaming)
setcontrast(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7069,7 +7082,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
sd->lightfreq = val;
if (gspca_dev->streaming)
setlightfreq(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7087,7 +7100,7 @@ static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
sd->sharpness = val;
if (gspca_dev->streaming)
setsharpness(gspca_dev);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
@@ -7132,7 +7145,7 @@ static int sd_set_jcomp(struct gspca_dev *gspca_dev,
sd->quality = jcomp->quality;
if (gspca_dev->streaming)
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_get_jcomp(struct gspca_dev *gspca_dev,
--
GitLab
From c39da6a37566733d703bbd9a489fe39e95ea4df1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Wed, 4 Aug 2010 06:07:23 -0300
Subject: [PATCH 488/863] V4L/DVB: gspca - zc3xx: Do the sensor probe at resume
time
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/zc3xx.c | 34 +++++++++++++++++--------------
1 file changed, 19 insertions(+), 15 deletions(-)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index a9af568305ac7..2743ed47d9b73 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -6570,6 +6570,24 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* define some sensors from the vendor/product */
+ sd->sensor = id->driver_info;
+
+ sd->sharpness = SHARPNESS_DEF;
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->autogain = AUTOGAIN_DEF;
+ sd->lightfreq = FREQ_DEF;
+ sd->quality = QUALITY_DEF;
+
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
@@ -6617,9 +6635,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
[SENSOR_TAS5130C_VF0250] = 1,
};
- /* define some sensors from the vendor/product */
- sd->sharpness = SHARPNESS_DEF;
- sd->sensor = id->driver_info;
sensor = zcxx_probeSensor(gspca_dev);
if (sensor >= 0)
PDEBUG(D_PROBE, "probe sensor -> %04x", sensor);
@@ -6775,12 +6790,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
cam->nmodes = ARRAY_SIZE(broken_vga_mode);
break;
}
- sd->brightness = BRIGHTNESS_DEF;
- sd->contrast = CONTRAST_DEF;
sd->gamma = gamma[sd->sensor];
- sd->autogain = AUTOGAIN_DEF;
- sd->lightfreq = FREQ_DEF;
- sd->quality = QUALITY_DEF;
switch (sd->sensor) {
case SENSOR_HV7131B:
@@ -6790,15 +6800,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
break;
}
- return gspca_dev->usb_err;
-}
-
-/* this function is called at probe and resume time */
-static int sd_init(struct gspca_dev *gspca_dev)
-{
/* switch off the led */
reg_w(gspca_dev, 0x01, 0x0000);
- return 0;
+ return gspca_dev->usb_err;
}
static int sd_start(struct gspca_dev *gspca_dev)
--
GitLab
From 5fd450e913c8836ce3f111300ab04d601876af2f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Wed, 4 Aug 2010 06:08:52 -0300
Subject: [PATCH 489/863] V4L/DVB: gspca - zc3xx: Possible use of the highest
alternate setting
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/zc3xx.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 2743ed47d9b73..d796bec62106b 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -6773,8 +6773,6 @@ static int sd_init(struct gspca_dev *gspca_dev)
}
cam = &gspca_dev->cam;
-/*fixme:test*/
- gspca_dev->nbalt--;
switch (mode_tb[sd->sensor]) {
case 0:
cam->cam_mode = sif_mode;
--
GitLab
From 2af0b4c60cc0daf0a3abbaa159380fd729dcf729 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Wed, 4 Aug 2010 07:12:57 -0300
Subject: [PATCH 490/863] V4L/DVB: gspca - zc3xx: Add the light frequency
control for sensor hv7131r
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The new exchanges are extracted from the public file lPEPI264v.inf of the
ms-Windows driver. In this file, the sensor is named hv7131b but the exchanges
are those of the hv7131r.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/zc3xx.c | 241 +++++++++++++++---------------
1 file changed, 123 insertions(+), 118 deletions(-)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index d796bec62106b..5c9113098e7ff 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -2076,6 +2076,7 @@ static const struct usb_action hv7131b_NoFlikerScale[] = { /* 320x240 */
{}
};
+/* from lPEPI264v.inf (hv7131b!) */
static const struct usb_action hv7131r_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
@@ -2083,8 +2084,8 @@ static const struct usb_action hv7131r_InitialScale[] = {
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
{0xa0, 0x77, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
@@ -2097,6 +2098,8 @@ static const struct usb_action hv7131r_InitialScale[] = {
{0xa0, 0x88, ZC3XX_R09E_WINWIDTHLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xdd, 0x00, 0x0200},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x000c},
{0xaa, 0x11, 0x0000},
@@ -2105,10 +2108,10 @@ static const struct usb_action hv7131r_InitialScale[] = {
{0xaa, 0x15, 0x00e8},
{0xaa, 0x16, 0x0002},
{0xaa, 0x17, 0x0088},
-
+ {0xaa, 0x30, 0x000b},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x89, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x78, ZC3XX_R18D_YTARGET},
{0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN},
{0xa0, 0x00, 0x01ad},
{0xa0, 0xc0, 0x019b},
@@ -2118,96 +2121,44 @@ static const struct usb_action hv7131r_InitialScale[] = {
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa1, 0x01, 0x0002},
- {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
- {0xa1, 0x01, 0x0091},
- {0xa1, 0x01, 0x0095},
- {0xa1, 0x01, 0x0096},
-
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x60, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf0, ZC3XX_R10B_RGB01},
- {0xa0, 0xf0, ZC3XX_R10C_RGB02},
- {0xa0, 0xf0, ZC3XX_R10D_RGB10},
- {0xa0, 0x60, ZC3XX_R10E_RGB11},
- {0xa0, 0xf0, ZC3XX_R10F_RGB12},
- {0xa0, 0xf0, ZC3XX_R110_RGB20},
- {0xa0, 0xf0, ZC3XX_R111_RGB21},
- {0xa0, 0x60, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x25, 0x0007},
- {0xaa, 0x26, 0x0053},
- {0xaa, 0x27, 0x0000},
-
- {0xa0, 0x10, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 2f */
- {0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID}, /* 9b */
- {0xa0, 0x60, ZC3XX_R192_EXPOSURELIMITLOW}, /* 80 */
- {0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0xd4, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0xc0, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x13, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa1, 0x01, 0x001d},
- {0xa1, 0x01, 0x001e},
- {0xa1, 0x01, 0x001f},
- {0xa1, 0x01, 0x0020},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-
static const struct usb_action hv7131r_Initial[] = {
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
-
- {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, /* diff */
+ {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
{0xa0, 0x77, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
-
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
-
+ {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
- {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW}, /* 1e0 */
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x01, ZC3XX_R09B_WINHEIGHTHIGH},
- {0xa0, 0xe8, ZC3XX_R09C_WINHEIGHTLOW},
+ {0xa0, 0xe6, ZC3XX_R09C_WINHEIGHTLOW},
{0xa0, 0x02, ZC3XX_R09D_WINWIDTHHIGH},
- {0xa0, 0x88, ZC3XX_R09E_WINWIDTHLOW},
+ {0xa0, 0x86, ZC3XX_R09E_WINWIDTHLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xdd, 0x00, 0x0200},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x000c},
{0xaa, 0x11, 0x0000},
{0xaa, 0x13, 0x0000},
{0xaa, 0x14, 0x0001},
- {0xaa, 0x15, 0x00e8},
+ {0xaa, 0x15, 0x00e6},
{0xaa, 0x16, 0x0002},
- {0xaa, 0x17, 0x0088},
-
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00 */
-
+ {0xaa, 0x17, 0x0086},
+ {0xaa, 0x30, 0x000b},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x89, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x78, ZC3XX_R18D_YTARGET},
{0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN},
{0xa0, 0x00, 0x01ad},
{0xa0, 0xc0, 0x019b},
@@ -2217,58 +2168,114 @@ static const struct usb_action hv7131r_Initial[] = {
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa1, 0x01, 0x0002},
- {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
- /* read the i2c chips ident */
- {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
- {0xa1, 0x01, 0x0091},
- {0xa1, 0x01, 0x0095},
- {0xa1, 0x01, 0x0096},
-
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x60, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf0, ZC3XX_R10B_RGB01},
- {0xa0, 0xf0, ZC3XX_R10C_RGB02},
- {0xa0, 0xf0, ZC3XX_R10D_RGB10},
- {0xa0, 0x60, ZC3XX_R10E_RGB11},
- {0xa0, 0xf0, ZC3XX_R10F_RGB12},
- {0xa0, 0xf0, ZC3XX_R110_RGB20},
- {0xa0, 0xf0, ZC3XX_R111_RGB21},
- {0xa0, 0x60, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action hv7131r_50HZ[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x25, 0x0007},
- {0xaa, 0x26, 0x0053},
- {0xaa, 0x27, 0x0000},
-
- {0xa0, 0x10, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 2f */
- {0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID}, /* 9b */
- {0xa0, 0x60, ZC3XX_R192_EXPOSURELIMITLOW}, /* 80 */
-
+ {0xa0, 0x06, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x68, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xa0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0xea, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x60, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_50HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x0c, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xd1, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x40, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
{0xa0, 0xd4, ZC3XX_R196_ANTIFLICKERMID},
{0xa0, 0xc0, ZC3XX_R197_ANTIFLICKERLOW},
-
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
{0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
{0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x13, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa1, 0x01, 0x001d},
- {0xa1, 0x01, 0x001e},
- {0xa1, 0x01, 0x001f},
- {0xa1, 0x01, 0x0020},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_60HZ[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x06, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x1a, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x80, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0xc3, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x50, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_60HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x0c, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x35, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x01, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x86, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0xa0, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x18, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_NoFliker[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x2f, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xf8, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x02, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x58, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action hv7131r_NoFlikerScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xa0, 0x2f, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xf8, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x04, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0xb0, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x00, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x00, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0x08, ZC3XX_R020_HSYNC_3},
{}
};
@@ -6167,9 +6174,9 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
hv7131b_50HZ, hv7131b_50HZScale,
hv7131b_60HZ, hv7131b_60HZScale},
[SENSOR_HV7131R] =
- {NULL, NULL,
- NULL, NULL,
- NULL, NULL},
+ {hv7131r_NoFliker, hv7131r_NoFlikerScale,
+ hv7131r_50HZ, hv7131r_50HZScale,
+ hv7131r_60HZ, hv7131r_60HZScale},
[SENSOR_ICM105A] =
{icm105a_NoFliker, icm105a_NoFlikerScale,
icm105a_50HZ, icm105a_50HZScale,
@@ -6791,8 +6798,6 @@ static int sd_init(struct gspca_dev *gspca_dev)
sd->gamma = gamma[sd->sensor];
switch (sd->sensor) {
- case SENSOR_HV7131B:
- case SENSOR_HV7131R:
case SENSOR_OV7630C:
gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
break;
--
GitLab
From a484dd9b77fbbda2a79bf1b371c6d31f90e15504 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Wed, 4 Aug 2010 07:25:12 -0300
Subject: [PATCH 491/863] V4L/DVB: gspca - zc3xx: Redefine the exchanges of
sensor mt9v111 (mi0360soc)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The exchanges for sensor mt9v111 are different with bridges zc301 and zc303.
The exchanges for the bridge zc303 were those of the bad named tas5130ck.
These mt9v111 exchanges have been adjusted from the ms-Windows public files
vm30x.inf (for 0ac8:301b) and usbvm303.inf (for 0ac8:303b).
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/gspca/zc3xx.c | 774 ++++++++++++------------------
1 file changed, 307 insertions(+), 467 deletions(-)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 5c9113098e7ff..0666038a51b02 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -52,11 +52,16 @@ struct sd {
#define QUALITY_MAX 80
#define QUALITY_DEF 70
+ u8 bridge;
u8 sensor; /* Type of image sensor chip */
u16 chip_revision;
u8 jpeg_hdr[JPEG_HDR_SZ];
};
+enum bridges {
+ BRIDGE_ZC301,
+ BRIDGE_ZC303,
+};
enum sensors {
SENSOR_ADCM2700,
SENSOR_CS2102,
@@ -67,14 +72,14 @@ enum sensors {
SENSOR_HV7131R,
SENSOR_ICM105A,
SENSOR_MC501CB,
- SENSOR_MI0360SOC, /* = MT9V111 */
+ SENSOR_MT9V111_1, /* (mi360soc) zc301 */
+ SENSOR_MT9V111_3, /* (mi360soc) zc303 */
SENSOR_OV7620, /* OV7648 - same values */
SENSOR_OV7630C,
SENSOR_PAS106,
SENSOR_PAS202B,
SENSOR_PB0330,
SENSOR_PO2030,
- SENSOR_TAS5130CK,
SENSOR_TAS5130C,
SENSOR_TAS5130C_VF0250,
SENSOR_MAX
@@ -4249,8 +4254,8 @@ static const struct usb_action pas202b_NoFlikerScale[] = {
{}
};
-/* mi0360soc and pb0330 from vm30x.inf for 0ac8:301b and 0ac8:303b 07/02/13 */
-static const struct usb_action mi0360soc_Initial[] = { /* 640x480 */
+/* mt9v111 (mi0360soc) and pb0330 from vm30x.inf 0ac8:301b 07/02/13 */
+static const struct usb_action mt9v111_1_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
@@ -4261,14 +4266,14 @@ static const struct usb_action mi0360soc_Initial[] = { /* 640x480 */
{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC}, /*jfm: was 03*/
-/* {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, */
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x0001},
{0xaa, 0x06, 0x0000},
{0xaa, 0x08, 0x0483},
@@ -4278,18 +4283,18 @@ static const struct usb_action mi0360soc_Initial[] = { /* 640x480 */
{0xaa, 0x03, 0x01e5}, /*jfm: was 01e7*/
{0xaa, 0x04, 0x0285}, /*jfm: was 0287*/
{0xaa, 0x07, 0x3002},
- {0xaa, 0x20, 0x5100}, /*jfm: was 1100*/
- {0xaa, 0x35, 0x507f}, /*jfm: was 0050*/
+ {0xaa, 0x20, 0x5100},
+ {0xaa, 0x35, 0x507f},
{0xaa, 0x30, 0x0005},
{0xaa, 0x31, 0x0000},
{0xaa, 0x58, 0x0078},
{0xaa, 0x62, 0x0411},
- {0xaa, 0x2b, 0x0028},
+ {0xaa, 0x2b, 0x007f},
{0xaa, 0x2c, 0x007f}, /*jfm: was 0030*/
{0xaa, 0x2d, 0x007f}, /*jfm: was 0030*/
{0xaa, 0x2e, 0x007f}, /*jfm: was 0030*/
{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION}, /*jfm: was 37*/
+ {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
@@ -4299,12 +4304,12 @@ static const struct usb_action mi0360soc_Initial[] = { /* 640x480 */
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET}, /* jfm: was 78 */
+ {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
{0xa0, 0x61, ZC3XX_R116_RGAIN},
{0xa0, 0x65, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action mi0360soc_InitialScale[] = { /* 320x240 */
+static const struct usb_action mt9v111_1_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
@@ -4315,14 +4320,14 @@ static const struct usb_action mi0360soc_InitialScale[] = { /* 320x240 */
{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC}, /*jfm: was 03*/
-/* {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, */
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x0001},
{0xaa, 0x06, 0x0000},
{0xaa, 0x08, 0x0483},
@@ -4332,7 +4337,7 @@ static const struct usb_action mi0360soc_InitialScale[] = { /* 320x240 */
{0xaa, 0x03, 0x01e7},
{0xaa, 0x04, 0x0287},
{0xaa, 0x07, 0x3002},
- {0xaa, 0x20, 0x5100}, /*jfm: was 1100*/
+ {0xaa, 0x20, 0x5100},
{0xaa, 0x35, 0x007f}, /*jfm: was 0050*/
{0xaa, 0x30, 0x0005},
{0xaa, 0x31, 0x0000},
@@ -4343,7 +4348,7 @@ static const struct usb_action mi0360soc_InitialScale[] = { /* 320x240 */
{0xaa, 0x2d, 0x007f}, /*jfm: was 30*/
{0xaa, 0x2e, 0x007f}, /*jfm: was 28*/
{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION}, /*jfm: was 37*/
+ {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
@@ -4353,12 +4358,12 @@ static const struct usb_action mi0360soc_InitialScale[] = { /* 320x240 */
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET}, /*jfm: was 78*/
+ {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
{0xa0, 0x61, ZC3XX_R116_RGAIN},
{0xa0, 0x65, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action mi360soc_AE50HZ[] = {
+static const struct usb_action mt9v111_1_AE50HZ[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0562},
@@ -4381,7 +4386,7 @@ static const struct usb_action mi360soc_AE50HZ[] = {
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AE50HZScale[] = {
+static const struct usb_action mt9v111_1_AE50HZScale[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0509},
@@ -4403,11 +4408,11 @@ static const struct usb_action mi360soc_AE50HZScale[] = {
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AE60HZ[] = {
+static const struct usb_action mt9v111_1_AE60HZ[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xbb, 0x00, 0x053d},
- {0xbb, 0x01, 0x096e},
+ {0xaa, 0x05, 0x003d},
+ {0xaa, 0x09, 0x016e},
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
{0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
{0xa0, 0xdd, ZC3XX_R192_EXPOSURELIMITLOW},
@@ -4426,7 +4431,7 @@ static const struct usb_action mi360soc_AE60HZ[] = {
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AE60HZScale[] = {
+static const struct usb_action mt9v111_1_AE60HZScale[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0509},
@@ -4448,7 +4453,7 @@ static const struct usb_action mi360soc_AE60HZScale[] = {
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AENoFliker[] = {
+static const struct usb_action mt9v111_1_AENoFliker[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0509},
@@ -4471,7 +4476,7 @@ static const struct usb_action mi360soc_AENoFliker[] = {
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action mi360soc_AENoFlikerScale[] = {
+static const struct usb_action mt9v111_1_AENoFlikerScale[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xbb, 0x00, 0x0534},
@@ -4494,6 +4499,251 @@ static const struct usb_action mi360soc_AENoFlikerScale[] = {
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
+/* from usbvm303.inf 0ac8:303b 07/03/25 (3 - tas5130c) */
+static const struct usb_action mt9v111_3_Initial[] = {
+ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+ {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
+ {0xa0, 0x04, ZC3XX_R002_CLOCKSELECT},
+ {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
+ {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
+ {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
+ {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+ {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
+ {0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xaa, 0x01, 0x0001}, /* select IFP/SOC registers */
+ {0xaa, 0x06, 0x0000}, /* operating mode control */
+ {0xaa, 0x08, 0x0483}, /* output format control */
+ /* H red first, V red or blue first,
+ * raw Bayer, auto flicker */
+ {0xaa, 0x01, 0x0004}, /* select sensor core registers */
+ {0xaa, 0x08, 0x0006}, /* row start */
+ {0xaa, 0x02, 0x0011}, /* column start */
+ {0xaa, 0x03, 0x01e5}, /* window height - 1 */
+ {0xaa, 0x04, 0x0285}, /* window width - 1 */
+ {0xaa, 0x07, 0x3002}, /* output control */
+ {0xaa, 0x20, 0x1100}, /* read mode: bits 8 & 12 (?) */
+ {0xaa, 0x35, 0x007f}, /* global gain */
+ {0xaa, 0x30, 0x0005},
+ {0xaa, 0x31, 0x0000},
+ {0xaa, 0x58, 0x0078},
+ {0xaa, 0x62, 0x0411},
+ {0xaa, 0x2b, 0x007f}, /* green1 gain */
+ {0xaa, 0x2c, 0x007f}, /* blue gain */
+ {0xaa, 0x2d, 0x007f}, /* red gain */
+ {0xaa, 0x2e, 0x007f}, /* green2 gain */
+ {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
+ {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
+ {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+ {0xa0, 0x00, 0x01ad},
+ {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
+ {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
+ {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
+ {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+ {0xa0, 0x80, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x61, ZC3XX_R116_RGAIN},
+ {0xa0, 0x65, ZC3XX_R118_BGAIN},
+ {}
+};
+static const struct usb_action mt9v111_3_InitialScale[] = {
+ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+ {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
+ {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
+ {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
+ {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
+ {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
+ {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+ {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
+ {0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xaa, 0x01, 0x0001},
+ {0xaa, 0x06, 0x0000},
+ {0xaa, 0x08, 0x0483},
+ {0xaa, 0x01, 0x0004},
+ {0xaa, 0x08, 0x0006},
+ {0xaa, 0x02, 0x0011},
+ {0xaa, 0x03, 0x01e7},
+ {0xaa, 0x04, 0x0287},
+ {0xaa, 0x07, 0x3002},
+ {0xaa, 0x20, 0x1100},
+ {0xaa, 0x35, 0x007f},
+ {0xaa, 0x30, 0x0005},
+ {0xaa, 0x31, 0x0000},
+ {0xaa, 0x58, 0x0078},
+ {0xaa, 0x62, 0x0411},
+ {0xaa, 0x2b, 0x007f},
+ {0xaa, 0x2c, 0x007f},
+ {0xaa, 0x2d, 0x007f},
+ {0xaa, 0x2e, 0x007f},
+ {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
+ {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
+ {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+ {0xa0, 0x00, 0x01ad},
+ {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
+ {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
+ {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
+ {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+ {0xa0, 0x80, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x61, ZC3XX_R116_RGAIN},
+ {0xa0, 0x65, ZC3XX_R118_BGAIN},
+ {}
+};
+static const struct usb_action mt9v111_3_AE50HZ[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x05, 0x0009}, /* horizontal blanking */
+ {0xaa, 0x09, 0x01ce}, /* shutter width */
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mt9v111_3_AE50HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x05, 0x0009},
+ {0xaa, 0x09, 0x01ce},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mt9v111_3_AE60HZ[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x05, 0x0009},
+ {0xaa, 0x09, 0x0083},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x8f, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x81, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mt9v111_3_AE60HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x05, 0x0009},
+ {0xaa, 0x09, 0x0083},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x8f, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x81, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mt9v111_3_AENoFliker[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x05, 0x0034},
+ {0xaa, 0x09, 0x0260},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x34, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x60, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mt9v111_3_AENoFlikerScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x05, 0x0034},
+ {0xaa, 0x09, 0x0260},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x34, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x60, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
static const struct usb_action pb0330_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
@@ -4936,418 +5186,6 @@ static const struct usb_action po2030_NoFliker[] = {
{}
};
-/* TEST */
-static const struct usb_action tas5130cK_InitialScale[] = {
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x01, 0x003b},
- {0xa0, 0x0e, 0x003a},
- {0xa0, 0x01, 0x0038},
- {0xa0, 0x0b, 0x0039},
- {0xa0, 0x00, 0x0038},
- {0xa0, 0x0b, 0x0039},
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
- {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
- {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
- {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
- {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
- {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
- {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
- {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
- {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x01, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x06, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x83, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x04, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x06, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x02, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x03, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0xE7, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x04, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x87, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x02, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x07, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x02, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x30, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x20, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x51, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x35, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x30, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x05, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x31, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x58, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x78, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x62, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2B, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2c, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2D, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2e, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
- {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
- {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
- {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
- {0xa0, 0x61, ZC3XX_R116_RGAIN},
- {0xa0, 0x65, ZC3XX_R118_BGAIN},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x4c, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf1, ZC3XX_R10B_RGB01},
- {0xa0, 0x03, ZC3XX_R10C_RGB02},
- {0xa0, 0xfe, ZC3XX_R10D_RGB10},
- {0xa0, 0x51, ZC3XX_R10E_RGB11},
- {0xa0, 0xf1, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0x03, ZC3XX_R111_RGB21},
- {0xa0, 0x51, ZC3XX_R112_RGB22},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
- {0xa0, 0x38, ZC3XX_R120_GAMMA00}, /* gamma > 5 */
- {0xa0, 0x51, ZC3XX_R121_GAMMA01},
- {0xa0, 0x6e, ZC3XX_R122_GAMMA02},
- {0xa0, 0x8c, ZC3XX_R123_GAMMA03},
- {0xa0, 0xa2, ZC3XX_R124_GAMMA04},
- {0xa0, 0xb6, ZC3XX_R125_GAMMA05},
- {0xa0, 0xc8, ZC3XX_R126_GAMMA06},
- {0xa0, 0xd6, ZC3XX_R127_GAMMA07},
- {0xa0, 0xe2, ZC3XX_R128_GAMMA08},
- {0xa0, 0xed, ZC3XX_R129_GAMMA09},
- {0xa0, 0xf5, ZC3XX_R12A_GAMMA0A},
- {0xa0, 0xfc, ZC3XX_R12B_GAMMA0B},
- {0xa0, 0xff, ZC3XX_R12C_GAMMA0C},
- {0xa0, 0xff, ZC3XX_R12D_GAMMA0D},
- {0xa0, 0xff, ZC3XX_R12E_GAMMA0E},
- {0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
- {0xa0, 0x12, ZC3XX_R130_GAMMA10},
- {0xa0, 0x1b, ZC3XX_R131_GAMMA11},
- {0xa0, 0x1d, ZC3XX_R132_GAMMA12},
- {0xa0, 0x1a, ZC3XX_R133_GAMMA13},
- {0xa0, 0x15, ZC3XX_R134_GAMMA14},
- {0xa0, 0x12, ZC3XX_R135_GAMMA15},
- {0xa0, 0x0f, ZC3XX_R136_GAMMA16},
- {0xa0, 0x0d, ZC3XX_R137_GAMMA17},
- {0xa0, 0x0b, ZC3XX_R138_GAMMA18},
- {0xa0, 0x09, ZC3XX_R139_GAMMA19},
- {0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
- {0xa0, 0x05, ZC3XX_R13B_GAMMA1B},
- {0xa0, 0x00, ZC3XX_R13C_GAMMA1C},
- {0xa0, 0x00, ZC3XX_R13D_GAMMA1D},
- {0xa0, 0x00, ZC3XX_R13E_GAMMA1E},
- {0xa0, 0x01, ZC3XX_R13F_GAMMA1F},
- {0xa0, 0x4c, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf1, ZC3XX_R10B_RGB01},
- {0xa0, 0x03, ZC3XX_R10C_RGB02},
- {0xa0, 0xfe, ZC3XX_R10D_RGB10},
- {0xa0, 0x51, ZC3XX_R10E_RGB11},
- {0xa0, 0xf1, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0x03, ZC3XX_R111_RGB21},
- {0xa0, 0x51, ZC3XX_R112_RGB22},
- {0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xa0, 0x05, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x09, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x09, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x34, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {}
-};
-
-static const struct usb_action tas5130cK_Initial[] = {
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x01, 0x003b},
- {0xa0, 0x0e, 0x003a},
- {0xa0, 0x01, 0x0038},
- {0xa0, 0x0b, 0x0039},
- {0xa0, 0x00, 0x0038},
- {0xa0, 0x0b, 0x0039},
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
- {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
- {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
- {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
- {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
- {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
- {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
- {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
- {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x01, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x06, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x83, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x01, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x04, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x08, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x06, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x02, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x03, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0xe5, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x04, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x85, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x02, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x07, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x02, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x30, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x20, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x51, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x35, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x50, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x30, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x05, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x31, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x00, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x58, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x78, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x62, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x11, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x04, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2B, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2C, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7F, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2D, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x2e, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x7f, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
- {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
- {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
- {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
- {0xa0, 0x61, ZC3XX_R116_RGAIN},
- {0xa0, 0x65, ZC3XX_R118_BGAIN},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x4c, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf1, ZC3XX_R10B_RGB01},
- {0xa0, 0x03, ZC3XX_R10C_RGB02},
- {0xa0, 0xfe, ZC3XX_R10D_RGB10},
- {0xa0, 0x51, ZC3XX_R10E_RGB11},
- {0xa0, 0xf1, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0x03, ZC3XX_R111_RGB21},
- {0xa0, 0x51, ZC3XX_R112_RGB22},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
- {0xa0, 0x38, ZC3XX_R120_GAMMA00}, /* gamma > 5 */
- {0xa0, 0x51, ZC3XX_R121_GAMMA01},
- {0xa0, 0x6e, ZC3XX_R122_GAMMA02},
- {0xa0, 0x8c, ZC3XX_R123_GAMMA03},
- {0xa0, 0xa2, ZC3XX_R124_GAMMA04},
- {0xa0, 0xb6, ZC3XX_R125_GAMMA05},
- {0xa0, 0xc8, ZC3XX_R126_GAMMA06},
- {0xa0, 0xd6, ZC3XX_R127_GAMMA07},
- {0xa0, 0xe2, ZC3XX_R128_GAMMA08},
- {0xa0, 0xed, ZC3XX_R129_GAMMA09},
- {0xa0, 0xf5, ZC3XX_R12A_GAMMA0A},
- {0xa0, 0xfc, ZC3XX_R12B_GAMMA0B},
- {0xa0, 0xff, ZC3XX_R12C_GAMMA0C},
- {0xa0, 0xff, ZC3XX_R12D_GAMMA0D},
- {0xa0, 0xff, ZC3XX_R12E_GAMMA0E},
- {0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
- {0xa0, 0x12, ZC3XX_R130_GAMMA10},
- {0xa0, 0x1b, ZC3XX_R131_GAMMA11},
- {0xa0, 0x1d, ZC3XX_R132_GAMMA12},
- {0xa0, 0x1a, ZC3XX_R133_GAMMA13},
- {0xa0, 0x15, ZC3XX_R134_GAMMA14},
- {0xa0, 0x12, ZC3XX_R135_GAMMA15},
- {0xa0, 0x0f, ZC3XX_R136_GAMMA16},
- {0xa0, 0x0d, ZC3XX_R137_GAMMA17},
- {0xa0, 0x0b, ZC3XX_R138_GAMMA18},
- {0xa0, 0x09, ZC3XX_R139_GAMMA19},
- {0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
- {0xa0, 0x05, ZC3XX_R13B_GAMMA1B},
- {0xa0, 0x00, ZC3XX_R13C_GAMMA1C},
- {0xa0, 0x00, ZC3XX_R13D_GAMMA1D},
- {0xa0, 0x00, ZC3XX_R13E_GAMMA1E},
- {0xa0, 0x01, ZC3XX_R13F_GAMMA1F},
- {0xa0, 0x4c, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf1, ZC3XX_R10B_RGB01},
- {0xa0, 0x03, ZC3XX_R10C_RGB02},
- {0xa0, 0xfe, ZC3XX_R10D_RGB10},
- {0xa0, 0x51, ZC3XX_R10E_RGB11},
- {0xa0, 0xf1, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0x03, ZC3XX_R111_RGB21},
- {0xa0, 0x51, ZC3XX_R112_RGB22},
- {0xa0, 0x10, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xa0, 0x05, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x62, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x00, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x09, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0xaa, ZC3XX_R093_I2CSETVALUE},
- {0xa0, 0x01, ZC3XX_R094_I2CWRITEACK},
- {0xa0, 0x01, ZC3XX_R090_I2CCOMMAND},
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0x9b, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0x62, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x30, 0x0007},
- {0xa0, 0x02, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x00, 0x0007},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {}
-};
-
static const struct usb_action tas5130c_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x50, ZC3XX_R002_CLOCKSELECT},
@@ -6012,14 +5850,14 @@ static void setmatrix(struct gspca_dev *gspca_dev)
[SENSOR_HV7131R] = NULL,
[SENSOR_ICM105A] = po2030_matrix,
[SENSOR_MC501CB] = NULL,
- [SENSOR_MI0360SOC] = gc0305_matrix,
+ [SENSOR_MT9V111_1] = gc0305_matrix,
+ [SENSOR_MT9V111_3] = gc0305_matrix,
[SENSOR_OV7620] = ov7620_matrix,
[SENSOR_OV7630C] = NULL,
[SENSOR_PAS106] = NULL,
[SENSOR_PAS202B] = pas202b_matrix,
[SENSOR_PB0330] = gc0305_matrix,
[SENSOR_PO2030] = po2030_matrix,
- [SENSOR_TAS5130CK] = NULL,
[SENSOR_TAS5130C] = tas5130c_matrix,
[SENSOR_TAS5130C_VF0250] = vf0250_matrix,
};
@@ -6185,10 +6023,14 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
{mc501cb_NoFliker, mc501cb_NoFlikerScale,
mc501cb_50HZ, mc501cb_50HZScale,
mc501cb_60HZ, mc501cb_60HZScale},
- [SENSOR_MI0360SOC] =
- {mi360soc_AENoFliker, mi360soc_AENoFlikerScale,
- mi360soc_AE50HZ, mi360soc_AE50HZScale,
- mi360soc_AE60HZ, mi360soc_AE60HZScale},
+ [SENSOR_MT9V111_1] =
+ {mt9v111_1_AENoFliker, mt9v111_1_AENoFlikerScale,
+ mt9v111_1_AE50HZ, mt9v111_1_AE50HZScale,
+ mt9v111_1_AE60HZ, mt9v111_1_AE60HZScale},
+ [SENSOR_MT9V111_3] =
+ {mt9v111_3_AENoFliker, mt9v111_3_AENoFlikerScale,
+ mt9v111_3_AE50HZ, mt9v111_3_AE50HZScale,
+ mt9v111_3_AE60HZ, mt9v111_3_AE60HZScale},
[SENSOR_OV7620] =
{ov7620_NoFliker, ov7620_NoFliker,
ov7620_50HZ, ov7620_50HZ,
@@ -6213,10 +6055,6 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
{po2030_NoFliker, po2030_NoFliker,
po2030_50HZ, po2030_50HZ,
po2030_60HZ, po2030_60HZ},
- [SENSOR_TAS5130CK] =
- {tas5130c_NoFliker, tas5130c_NoFlikerScale,
- tas5130c_50HZ, tas5130c_50HZScale,
- tas5130c_60HZ, tas5130c_60HZScale},
[SENSOR_TAS5130C] =
{tas5130c_NoFliker, tas5130c_NoFlikerScale,
tas5130c_50HZ, tas5130c_50HZScale,
@@ -6280,7 +6118,8 @@ static void send_unknown(struct gspca_dev *gspca_dev, int sensor)
case SENSOR_ADCM2700:
case SENSOR_GC0305:
case SENSOR_OV7620:
- case SENSOR_MI0360SOC:
+ case SENSOR_MT9V111_1:
+ case SENSOR_MT9V111_3:
case SENSOR_PB0330:
case SENSOR_PO2030:
reg_w(gspca_dev, 0x0d, 0x003a);
@@ -6424,11 +6263,11 @@ struct sensor_by_chipset_revision {
};
static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
{0xc000, 0x12}, /* TAS5130C */
- {0xc001, 0x13}, /* MI0360SOC */
+ {0xc001, 0x13}, /* MT9V111 */
{0xe001, 0x13},
{0x8001, 0x13},
{0x8000, 0x14}, /* CS2102K */
- {0x8400, 0x15}, /* TAS5130K */
+ {0x8400, 0x15}, /* MT9V111 */
{0xe400, 0x15},
};
@@ -6580,6 +6419,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (id->idProduct == 0x301b)
+ sd->bridge = BRIDGE_ZC301;
+ else
+ sd->bridge = BRIDGE_ZC303;
+
/* define some sensors from the vendor/product */
sd->sensor = id->driver_info;
@@ -6609,14 +6453,14 @@ static int sd_init(struct gspca_dev *gspca_dev)
[SENSOR_HV7131R] = 4,
[SENSOR_ICM105A] = 4,
[SENSOR_MC501CB] = 4,
- [SENSOR_MI0360SOC] = 4,
+ [SENSOR_MT9V111_1] = 4,
+ [SENSOR_MT9V111_3] = 4,
[SENSOR_OV7620] = 3,
[SENSOR_OV7630C] = 4,
[SENSOR_PAS106] = 4,
[SENSOR_PAS202B] = 4,
[SENSOR_PB0330] = 4,
[SENSOR_PO2030] = 4,
- [SENSOR_TAS5130CK] = 4,
[SENSOR_TAS5130C] = 3,
[SENSOR_TAS5130C_VF0250] = 3,
};
@@ -6630,14 +6474,14 @@ static int sd_init(struct gspca_dev *gspca_dev)
[SENSOR_HV7131R] = 1,
[SENSOR_ICM105A] = 1,
[SENSOR_MC501CB] = 2,
- [SENSOR_MI0360SOC] = 1,
+ [SENSOR_MT9V111_1] = 1,
+ [SENSOR_MT9V111_3] = 1,
[SENSOR_OV7620] = 2,
[SENSOR_OV7630C] = 1,
[SENSOR_PAS106] = 0,
[SENSOR_PAS202B] = 1,
[SENSOR_PB0330] = 1,
[SENSOR_PO2030] = 1,
- [SENSOR_TAS5130CK] = 1,
[SENSOR_TAS5130C] = 1,
[SENSOR_TAS5130C_VF0250] = 1,
};
@@ -6722,10 +6566,13 @@ static int sd_init(struct gspca_dev *gspca_dev)
sd->sensor = SENSOR_HV7131R;
break;
case 0x13:
+ case 0x15:
PDEBUG(D_PROBE,
- "Find Sensor MI0360SOC. Chip revision %x",
+ "Sensor MT9V111. Chip revision %04x",
sd->chip_revision);
- sd->sensor = SENSOR_MI0360SOC;
+ sd->sensor = sd->bridge == BRIDGE_ZC301
+ ? SENSOR_MT9V111_1
+ : SENSOR_MT9V111_3;
break;
case 0x14:
PDEBUG(D_PROBE,
@@ -6733,12 +6580,6 @@ static int sd_init(struct gspca_dev *gspca_dev)
sd->chip_revision);
sd->sensor = SENSOR_CS2102K;
break;
- case 0x15:
- PDEBUG(D_PROBE,
- "Find Sensor TAS5130CK?. Chip revision %x",
- sd->chip_revision);
- sd->sensor = SENSOR_TAS5130CK;
- break;
case 0x16:
PDEBUG(D_PROBE, "Find Sensor ADCM2700");
sd->sensor = SENSOR_ADCM2700;
@@ -6831,8 +6672,10 @@ static int sd_start(struct gspca_dev *gspca_dev)
{icm105a_Initial, icm105a_InitialScale},
[SENSOR_MC501CB] =
{mc501cb_Initial, mc501cb_InitialScale},
- [SENSOR_MI0360SOC] =
- {mi0360soc_Initial, mi0360soc_InitialScale},
+ [SENSOR_MT9V111_1] =
+ {mt9v111_1_Initial, mt9v111_1_InitialScale},
+ [SENSOR_MT9V111_3] =
+ {mt9v111_3_Initial, mt9v111_3_InitialScale},
[SENSOR_OV7620] =
{ov7620_Initial, ov7620_InitialScale},
[SENSOR_OV7630C] =
@@ -6845,8 +6688,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
{pb0330_Initial, pb0330_InitialScale},
[SENSOR_PO2030] =
{po2030_Initial, po2030_InitialScale},
- [SENSOR_TAS5130CK] =
- {tas5130cK_Initial, tas5130cK_InitialScale},
[SENSOR_TAS5130C] =
{tas5130c_Initial, tas5130c_InitialScale},
[SENSOR_TAS5130C_VF0250] =
@@ -6916,7 +6757,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_CS2102K: /* gamma set in xxx_Initial */
case SENSOR_HDCS2020b:
case SENSOR_OV7630C:
- case SENSOR_TAS5130CK:
break;
default:
setcontrast(gspca_dev);
--
GitLab
From 103754a0526fe35bddbcd8ccc913495c2a66ac21 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 5 Aug 2010 19:23:44 -0300
Subject: [PATCH 492/863] V4L/DVB: soc-camera: prohibit S_CROP, if internal
G_CROP has failed
There is no sense in trying to set cropping if we cannot get current one
from the host driver.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/soc_camera.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index f2032939fd4b7..a499cacec1f37 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -779,9 +779,12 @@ static int soc_camera_s_crop(struct file *file, void *fh,
ret = ici->ops->get_crop(icd, ¤t_crop);
/* Prohibit window size change with initialised buffers */
- if (icf->vb_vidq.bufs[0] && !ret &&
- (a->c.width != current_crop.c.width ||
- a->c.height != current_crop.c.height)) {
+ if (ret < 0) {
+ dev_err(&icd->dev,
+ "S_CROP denied: getting current crop failed\n");
+ } else if (icf->vb_vidq.bufs[0] &&
+ (a->c.width != current_crop.c.width ||
+ a->c.height != current_crop.c.height)) {
dev_err(&icd->dev,
"S_CROP denied: queue initialised and sizes differ\n");
ret = -EBUSY;
--
GitLab
From b3fc1782c8b84574e44cf5869c9afa75523e2db8 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <lyakh@extensa5220.grange>
Date: Thu, 5 Aug 2010 18:09:28 -0300
Subject: [PATCH 493/863] V4L/DVB: V4L: do not autoselect components on
embedded systems
Tuner, DVB frontend and video helper chip drivers are by default
autoselected by their respective host cards, this, however, doesn't make
much sense on SoC-based systems. Disable autoselection on EMBEDDED
systems.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/common/tuners/Kconfig | 2 +-
drivers/media/dvb/frontends/Kconfig | 2 +-
drivers/media/video/Kconfig | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 409a4261e5b5f..b3ed5daaacf27 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -34,7 +34,7 @@ config MEDIA_TUNER
menuconfig MEDIA_TUNER_CUSTOMISE
bool "Customize analog and hybrid tuner modules to build"
depends on MEDIA_TUNER
- default n
+ default y if EMBEDDED
help
This allows the user to deselect tuner drivers unnecessary
for their hardware from the build. Use this option with care
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 51d578a758a7c..b5f6a04f9c127 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -1,7 +1,7 @@
config DVB_FE_CUSTOMISE
bool "Customise the frontend modules to build"
depends on DVB_CORE
- default N
+ default y if EMBEDDED
help
This allows the user to select/deselect frontend drivers for their
hardware from the build.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index c70b67deb9b22..9d55fef2be3b0 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -83,7 +83,7 @@ config VIDEO_FIXED_MINOR_RANGES
config VIDEO_HELPER_CHIPS_AUTO
bool "Autoselect pertinent encoders/decoders and other helper chips"
- default y
+ default y if !EMBEDDED
---help---
Most video cards may require additional modules to encode or
decode audio/video standards. This option will autoselect
--
GitLab
From cd9ebdbc0541b4e8ee145c81642d68332f79b932 Mon Sep 17 00:00:00 2001
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
Date: Tue, 3 Aug 2010 06:37:54 -0300
Subject: [PATCH 494/863] V4L/DVB: mx2_camera: fix for list bufnum in
frame_done_emma
The emma uses bufnum 1 and 0. This patch tells the bufqueue to change
the next buffer to the next one and not the current one.
Otherwise the BUG_ON above will trigger everytime.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/mx2_camera.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 026bef0ba403d..8441ecac6b182 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -1201,7 +1201,7 @@ static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev,
buf = list_entry(pcdev->capture.next,
struct mx2_buffer, vb.queue);
- buf->bufnum = bufnum;
+ buf->bufnum = !bufnum;
list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
--
GitLab
From d86097e19cef2f13a29fc37db0dad17b99b6d5f8 Mon Sep 17 00:00:00 2001
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
Date: Tue, 3 Aug 2010 06:37:55 -0300
Subject: [PATCH 495/863] V4L/DVB: mx2_camera: add rising edge for pixclock
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/mx2_camera.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 8441ecac6b182..66ff174151b5f 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -785,6 +785,8 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
if (ret < 0)
return ret;
+ if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
+ csicr1 |= CSICR1_REDGE;
if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
csicr1 |= CSICR1_INV_PCLK;
if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
--
GitLab
From c8cf078ebd9f9b5ec3a113c8262062799fd9948a Mon Sep 17 00:00:00 2001
From: Philipp Wiesner <p.wiesner@phytec.de>
Date: Tue, 3 Aug 2010 07:57:39 -0300
Subject: [PATCH 496/863] V4L/DVB: mt9m111: Added indication that MT9M131 is
supported by this driver
Added this info to Kconfig and mt9m111.c, some comment cleanup,
replaced 'mt9m11x'-statements by clarifications or driver name.
Driver is fully compatible to mt9m131 which has only additional functions
compared to mt9m111. Those aren't used anyway at the moment.
Signed-off-by: Philipp Wiesner <p.wiesner@phytec.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/Kconfig | 5 +++--
drivers/media/video/mt9m111.c | 36 +++++++++++++++++++++--------------
2 files changed, 25 insertions(+), 16 deletions(-)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9d55fef2be3b0..f6e4d04753510 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -792,10 +792,11 @@ config SOC_CAMERA_MT9M001
and colour models.
config SOC_CAMERA_MT9M111
- tristate "mt9m111 and mt9m112 support"
+ tristate "mt9m111, mt9m112 and mt9m131 support"
depends on SOC_CAMERA && I2C
help
- This driver supports MT9M111 and MT9M112 cameras from Micron
+ This driver supports MT9M111, MT9M112 and MT9M131 cameras from
+ Micron/Aptina
config SOC_CAMERA_MT9T031
tristate "mt9t031 support"
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 31cc3d04bcc49..9f92d63532314 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -1,5 +1,5 @@
/*
- * Driver for MT9M111/MT9M112 CMOS Image Sensor from Micron
+ * Driver for MT9M111/MT9M112/MT9M131 CMOS Image Sensor from Micron/Aptina
*
* Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr>
*
@@ -19,11 +19,14 @@
#include <media/soc_camera.h>
/*
- * mt9m111 and mt9m112 i2c address is 0x5d or 0x48 (depending on SAddr pin)
+ * MT9M111, MT9M112 and MT9M131:
+ * i2c address is 0x48 or 0x5d (depending on SADDR pin)
* The platform has to define i2c_board_info and call i2c_register_board_info()
*/
-/* mt9m111: Sensor register addresses */
+/*
+ * Sensor core register addresses (0x000..0x0ff)
+ */
#define MT9M111_CHIP_VERSION 0x000
#define MT9M111_ROW_START 0x001
#define MT9M111_COLUMN_START 0x002
@@ -72,8 +75,9 @@
#define MT9M111_CTXT_CTRL_LED_FLASH_EN (1 << 2)
#define MT9M111_CTXT_CTRL_VBLANK_SEL_B (1 << 1)
#define MT9M111_CTXT_CTRL_HBLANK_SEL_B (1 << 0)
+
/*
- * mt9m111: Colorpipe register addresses (0x100..0x1ff)
+ * Colorpipe register addresses (0x100..0x1ff)
*/
#define MT9M111_OPER_MODE_CTRL 0x106
#define MT9M111_OUTPUT_FORMAT_CTRL 0x108
@@ -109,8 +113,9 @@
#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y (1 << 1)
#define MT9M111_OUTFMT_SWAP_RGB_EVEN (1 << 1)
#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr (1 << 0)
+
/*
- * mt9m111: Camera control register addresses (0x200..0x2ff not implemented)
+ * Camera control register addresses (0x200..0x2ff not implemented)
*/
#define reg_read(reg) mt9m111_reg_read(client, MT9M111_##reg)
@@ -160,7 +165,8 @@ enum mt9m111_context {
struct mt9m111 {
struct v4l2_subdev subdev;
- int model; /* V4L2_IDENT_MT9M11x* codes from v4l2-chip-ident.h */
+ int model; /* V4L2_IDENT_MT9M111 or V4L2_IDENT_MT9M112 code
+ * from v4l2-chip-ident.h */
enum mt9m111_context context;
struct v4l2_rect rect;
const struct mt9m111_datafmt *fmt;
@@ -934,7 +940,7 @@ static int mt9m111_init(struct i2c_client *client)
if (!ret)
ret = mt9m111_set_autoexposure(client, mt9m111->autoexposure);
if (ret)
- dev_err(&client->dev, "mt9m11x init failed: %d\n", ret);
+ dev_err(&client->dev, "mt9m111 init failed: %d\n", ret);
return ret;
}
@@ -970,21 +976,23 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
data = reg_read(CHIP_VERSION);
switch (data) {
- case 0x143a: /* MT9M111 */
+ case 0x143a: /* MT9M111 or MT9M131 */
mt9m111->model = V4L2_IDENT_MT9M111;
+ dev_info(&client->dev,
+ "Detected a MT9M111/MT9M131 chip ID %x\n", data);
break;
case 0x148c: /* MT9M112 */
mt9m111->model = V4L2_IDENT_MT9M112;
+ dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data);
break;
default:
ret = -ENODEV;
dev_err(&client->dev,
- "No MT9M11x chip detected, register read %x\n", data);
+ "No MT9M111/MT9M112/MT9M131 chip detected register read %x\n",
+ data);
goto ei2c;
}
- dev_info(&client->dev, "Detected a MT9M11x chip ID %x\n", data);
-
ei2c:
return ret;
}
@@ -1034,13 +1042,13 @@ static int mt9m111_probe(struct i2c_client *client,
int ret;
if (!icd) {
- dev_err(&client->dev, "MT9M11x: missing soc-camera data!\n");
+ dev_err(&client->dev, "mt9m111: soc-camera data missing!\n");
return -EINVAL;
}
icl = to_soc_camera_link(icd);
if (!icl) {
- dev_err(&client->dev, "MT9M11x driver needs platform data\n");
+ dev_err(&client->dev, "mt9m111: driver needs platform data\n");
return -EINVAL;
}
@@ -1114,6 +1122,6 @@ static void __exit mt9m111_mod_exit(void)
module_init(mt9m111_mod_init);
module_exit(mt9m111_mod_exit);
-MODULE_DESCRIPTION("Micron MT9M111/MT9M112 Camera driver");
+MODULE_DESCRIPTION("Micron/Aptina MT9M111/MT9M112/MT9M131 Camera driver");
MODULE_AUTHOR("Robert Jarzmik");
MODULE_LICENSE("GPL");
--
GitLab
From 175bad921c75ab3b7d11a9fffc0e8d9a4a179e61 Mon Sep 17 00:00:00 2001
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
Date: Tue, 3 Aug 2010 07:57:40 -0300
Subject: [PATCH 497/863] V4L/DVB: mt9m111: init chip after read CHIP_VERSION
Moved mt9m111_init after the chip version detection passage: I
don't like the idea of writing on a device we haven't identified
yet.
Signed-off-by: Philipp Wiesner <p.wiesner@phytec.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/mt9m111.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 9f92d63532314..758a4db27d656 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -969,10 +969,6 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
mt9m111->swap_rgb_even_odd = 1;
mt9m111->swap_rgb_red_blue = 1;
- ret = mt9m111_init(client);
- if (ret)
- goto ei2c;
-
data = reg_read(CHIP_VERSION);
switch (data) {
@@ -993,6 +989,8 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
goto ei2c;
}
+ ret = mt9m111_init(client);
+
ei2c:
return ret;
}
--
GitLab
From 03e30ca5f08e0f9c629204e537ff96b789e6e703 Mon Sep 17 00:00:00 2001
From: Pawel Osciak <p.osciak@samsung.com>
Date: Fri, 6 Aug 2010 10:50:46 -0300
Subject: [PATCH 498/863] V4L/DVB: v4l: s5p-fimc: Fix coding style issues
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/s5p-fimc/fimc-core.c | 36 +++++++++++++++++-------
drivers/media/video/s5p-fimc/fimc-core.h | 30 ++++++++++++--------
2 files changed, 44 insertions(+), 22 deletions(-)
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 6558a2ea9ffd2..b151c7be8a506 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -303,7 +303,9 @@ static int fimc_prepare_addr(struct fimc_ctx *ctx,
u32 pix_size;
int ret = 0;
- ctx_m2m_get_frame(frame, ctx, type);
+ frame = ctx_m2m_get_frame(ctx, type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
paddr = &frame->paddr;
if (!buf)
@@ -555,8 +557,10 @@ static void fimc_dma_run(void *priv)
spin_unlock_irqrestore(&ctx->slock, flags);
}
-/* Nothing done in job_abort. */
-static void fimc_job_abort(void *priv) {}
+static void fimc_job_abort(void *priv)
+{
+ /* Nothing done in job_abort. */
+}
static void fimc_buf_release(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
@@ -571,7 +575,9 @@ static int fimc_buf_setup(struct videobuf_queue *vq, unsigned int *count,
struct fimc_ctx *ctx = vq->priv_data;
struct fimc_frame *frame;
- ctx_m2m_get_frame(frame, ctx, vq->type);
+ frame = ctx_m2m_get_frame(ctx, vq->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
*size = (frame->width * frame->height * frame->fmt->depth) >> 3;
if (0 == *count)
@@ -587,7 +593,9 @@ static int fimc_buf_prepare(struct videobuf_queue *vq,
struct fimc_frame *frame;
int ret;
- ctx_m2m_get_frame(frame, ctx, vq->type);
+ frame = ctx_m2m_get_frame(ctx, vq->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
if (vb->baddr) {
if (vb->bsize < frame->size) {
@@ -628,7 +636,7 @@ static void fimc_buf_queue(struct videobuf_queue *vq,
v4l2_m2m_buf_queue(ctx->m2m_ctx, vq, vb);
}
-struct videobuf_queue_ops fimc_qops = {
+static struct videobuf_queue_ops fimc_qops = {
.buf_setup = fimc_buf_setup,
.buf_prepare = fimc_buf_prepare,
.buf_queue = fimc_buf_queue,
@@ -670,7 +678,9 @@ static int fimc_m2m_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
struct fimc_ctx *ctx = priv;
struct fimc_frame *frame;
- ctx_m2m_get_frame(frame, ctx, f->type);
+ frame = ctx_m2m_get_frame(ctx, f->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
f->fmt.pix.width = frame->width;
f->fmt.pix.height = frame->height;
@@ -1003,7 +1013,9 @@ static int fimc_m2m_cropcap(struct file *file, void *fh,
struct fimc_frame *frame;
struct fimc_ctx *ctx = fh;
- ctx_m2m_get_frame(frame, ctx, cr->type);
+ frame = ctx_m2m_get_frame(ctx, cr->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
cr->bounds.left = 0;
cr->bounds.top = 0;
@@ -1021,7 +1033,9 @@ static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
struct fimc_frame *frame;
struct fimc_ctx *ctx = file->private_data;
- ctx_m2m_get_frame(frame, ctx, cr->type);
+ frame = ctx_m2m_get_frame(ctx, cr->type);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
cr->c.left = frame->offs_h;
cr->c.top = frame->offs_v;
@@ -1052,7 +1066,9 @@ static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
return -EINVAL;
}
- ctx_m2m_get_frame(f, ctx, cr->type);
+ f = ctx_m2m_get_frame(ctx, cr->type);
+ if (IS_ERR(f))
+ return PTR_ERR(f);
/* Adjust to required pixel boundary. */
min_size = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ?
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index f121b939626a1..6b3e0cd73cdda 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -28,18 +28,6 @@
#define dbg(fmt, args...)
#endif
-#define ctx_m2m_get_frame(frame, ctx, type) do { \
- if (V4L2_BUF_TYPE_VIDEO_OUTPUT == (type)) { \
- frame = &(ctx)->s_frame; \
- } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE == (type)) { \
- frame = &(ctx)->d_frame; \
- } else { \
- v4l2_err(&(ctx)->fimc_dev->m2m.v4l2_dev,\
- "Wrong buffer/video queue type (%d)\n", type); \
- return -EINVAL; \
- } \
-} while (0)
-
#define NUM_FIMC_CLOCKS 2
#define MODULE_NAME "s5p-fimc"
#define FIMC_MAX_DEVS 3
@@ -444,6 +432,24 @@ static inline void fimc_hw_stop_in_dma(struct fimc_dev *dev)
writel(cfg, dev->regs + S5P_MSCTRL);
}
+static inline struct fimc_frame *ctx_m2m_get_frame(struct fimc_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ struct fimc_frame *frame;
+
+ if (V4L2_BUF_TYPE_VIDEO_OUTPUT == type) {
+ frame = &ctx->s_frame;
+ } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE == type) {
+ frame = &ctx->d_frame;
+ } else {
+ v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ "Wrong buffer/video queue type (%d)\n", type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return frame;
+}
+
/* -----------------------------------------------------*/
/* fimc-reg.c */
void fimc_hw_reset(struct fimc_dev *dev);
--
GitLab
From 0996517cf8eaded69b8502c8f5abeb8cec62b6d4 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 1 Aug 2010 14:32:42 -0300
Subject: [PATCH 499/863] V4L/DVB: v4l2: Add new control handling framework
Add a new framework to handle controls which makes life for driver
developers much easier.
Note that this patch moves some of the control support that used to be in
v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body
of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function
in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl
struct anymore, which makes it more general.
The remainder of v4l2-ctrls.c is all new. Highlights include:
- No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL,
S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers
or subdevs. New wrapper functions are provided that can just be plugged in.
Once everything has been converted these wrapper functions can be removed as well.
- When subdevices are added their controls can be automatically merged
with the bridge driver's controls.
- Most drivers just need to implement s_ctrl to set the controls.
The framework handles the locking and tries to be as 'atomic' as possible.
- Ready for the subdev device nodes: the same mechanism applies to subdevs
and their device nodes as well. Sub-device drivers can make controls
local, preventing them from being merged with bridge drivers.
- Takes care of backwards compatibility handling of VIDIOC_S_CTRL and
VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent.
CTRL_CLASS controls are automatically added.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/Makefile | 2 +-
drivers/media/video/v4l2-common.c | 479 +-------
drivers/media/video/v4l2-ctrls.c | 1847 +++++++++++++++++++++++++++++
include/media/v4l2-ctrls.h | 460 +++++++
include/media/v4l2-dev.h | 4 +
include/media/v4l2-device.h | 4 +
include/media/v4l2-subdev.h | 3 +
7 files changed, 2324 insertions(+), 475 deletions(-)
create mode 100644 drivers/media/video/v4l2-ctrls.c
create mode 100644 include/media/v4l2-ctrls.h
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index c76fef390797e..40f98fba5f88f 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -11,7 +11,7 @@ stkwebcam-objs := stk-webcam.o stk-sensor.o
omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o
videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \
- v4l2-event.o
+ v4l2-event.o v4l2-ctrls.o
# V4L2 core modules
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 4e53b0b3339ce..3ce7c64e57897 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -62,6 +62,7 @@
#define __OLD_VIDIOC_ /* To allow fixing old calls*/
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-chip-ident.h>
#include <linux/videodev2.h>
@@ -172,487 +173,17 @@ int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
}
EXPORT_SYMBOL(v4l2_ctrl_check);
-/* Returns NULL or a character pointer array containing the menu for
- the given control ID. The pointer array ends with a NULL pointer.
- An empty string signifies a menu entry that is invalid. This allows
- drivers to disable certain options if it is not supported. */
-const char **v4l2_ctrl_get_menu(u32 id)
-{
- static const char *mpeg_audio_sampling_freq[] = {
- "44.1 kHz",
- "48 kHz",
- "32 kHz",
- NULL
- };
- static const char *mpeg_audio_encoding[] = {
- "MPEG-1/2 Layer I",
- "MPEG-1/2 Layer II",
- "MPEG-1/2 Layer III",
- "MPEG-2/4 AAC",
- "AC-3",
- NULL
- };
- static const char *mpeg_audio_l1_bitrate[] = {
- "32 kbps",
- "64 kbps",
- "96 kbps",
- "128 kbps",
- "160 kbps",
- "192 kbps",
- "224 kbps",
- "256 kbps",
- "288 kbps",
- "320 kbps",
- "352 kbps",
- "384 kbps",
- "416 kbps",
- "448 kbps",
- NULL
- };
- static const char *mpeg_audio_l2_bitrate[] = {
- "32 kbps",
- "48 kbps",
- "56 kbps",
- "64 kbps",
- "80 kbps",
- "96 kbps",
- "112 kbps",
- "128 kbps",
- "160 kbps",
- "192 kbps",
- "224 kbps",
- "256 kbps",
- "320 kbps",
- "384 kbps",
- NULL
- };
- static const char *mpeg_audio_l3_bitrate[] = {
- "32 kbps",
- "40 kbps",
- "48 kbps",
- "56 kbps",
- "64 kbps",
- "80 kbps",
- "96 kbps",
- "112 kbps",
- "128 kbps",
- "160 kbps",
- "192 kbps",
- "224 kbps",
- "256 kbps",
- "320 kbps",
- NULL
- };
- static const char *mpeg_audio_ac3_bitrate[] = {
- "32 kbps",
- "40 kbps",
- "48 kbps",
- "56 kbps",
- "64 kbps",
- "80 kbps",
- "96 kbps",
- "112 kbps",
- "128 kbps",
- "160 kbps",
- "192 kbps",
- "224 kbps",
- "256 kbps",
- "320 kbps",
- "384 kbps",
- "448 kbps",
- "512 kbps",
- "576 kbps",
- "640 kbps",
- NULL
- };
- static const char *mpeg_audio_mode[] = {
- "Stereo",
- "Joint Stereo",
- "Dual",
- "Mono",
- NULL
- };
- static const char *mpeg_audio_mode_extension[] = {
- "Bound 4",
- "Bound 8",
- "Bound 12",
- "Bound 16",
- NULL
- };
- static const char *mpeg_audio_emphasis[] = {
- "No Emphasis",
- "50/15 us",
- "CCITT J17",
- NULL
- };
- static const char *mpeg_audio_crc[] = {
- "No CRC",
- "16-bit CRC",
- NULL
- };
- static const char *mpeg_video_encoding[] = {
- "MPEG-1",
- "MPEG-2",
- "MPEG-4 AVC",
- NULL
- };
- static const char *mpeg_video_aspect[] = {
- "1x1",
- "4x3",
- "16x9",
- "2.21x1",
- NULL
- };
- static const char *mpeg_video_bitrate_mode[] = {
- "Variable Bitrate",
- "Constant Bitrate",
- NULL
- };
- static const char *mpeg_stream_type[] = {
- "MPEG-2 Program Stream",
- "MPEG-2 Transport Stream",
- "MPEG-1 System Stream",
- "MPEG-2 DVD-compatible Stream",
- "MPEG-1 VCD-compatible Stream",
- "MPEG-2 SVCD-compatible Stream",
- NULL
- };
- static const char *mpeg_stream_vbi_fmt[] = {
- "No VBI",
- "Private packet, IVTV format",
- NULL
- };
- static const char *camera_power_line_frequency[] = {
- "Disabled",
- "50 Hz",
- "60 Hz",
- NULL
- };
- static const char *camera_exposure_auto[] = {
- "Auto Mode",
- "Manual Mode",
- "Shutter Priority Mode",
- "Aperture Priority Mode",
- NULL
- };
- static const char *colorfx[] = {
- "None",
- "Black & White",
- "Sepia",
- "Negative",
- "Emboss",
- "Sketch",
- "Sky blue",
- "Grass green",
- "Skin whiten",
- "Vivid",
- NULL
- };
- static const char *tune_preemphasis[] = {
- "No preemphasis",
- "50 useconds",
- "75 useconds",
- NULL,
- };
-
- switch (id) {
- case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
- return mpeg_audio_sampling_freq;
- case V4L2_CID_MPEG_AUDIO_ENCODING:
- return mpeg_audio_encoding;
- case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
- return mpeg_audio_l1_bitrate;
- case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
- return mpeg_audio_l2_bitrate;
- case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
- return mpeg_audio_l3_bitrate;
- case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
- return mpeg_audio_ac3_bitrate;
- case V4L2_CID_MPEG_AUDIO_MODE:
- return mpeg_audio_mode;
- case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
- return mpeg_audio_mode_extension;
- case V4L2_CID_MPEG_AUDIO_EMPHASIS:
- return mpeg_audio_emphasis;
- case V4L2_CID_MPEG_AUDIO_CRC:
- return mpeg_audio_crc;
- case V4L2_CID_MPEG_VIDEO_ENCODING:
- return mpeg_video_encoding;
- case V4L2_CID_MPEG_VIDEO_ASPECT:
- return mpeg_video_aspect;
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
- return mpeg_video_bitrate_mode;
- case V4L2_CID_MPEG_STREAM_TYPE:
- return mpeg_stream_type;
- case V4L2_CID_MPEG_STREAM_VBI_FMT:
- return mpeg_stream_vbi_fmt;
- case V4L2_CID_POWER_LINE_FREQUENCY:
- return camera_power_line_frequency;
- case V4L2_CID_EXPOSURE_AUTO:
- return camera_exposure_auto;
- case V4L2_CID_COLORFX:
- return colorfx;
- case V4L2_CID_TUNE_PREEMPHASIS:
- return tune_preemphasis;
- default:
- return NULL;
- }
-}
-EXPORT_SYMBOL(v4l2_ctrl_get_menu);
-
-/* Return the control name. */
-const char *v4l2_ctrl_get_name(u32 id)
-{
- switch (id) {
- /* USER controls */
- case V4L2_CID_USER_CLASS: return "User Controls";
- case V4L2_CID_BRIGHTNESS: return "Brightness";
- case V4L2_CID_CONTRAST: return "Contrast";
- case V4L2_CID_SATURATION: return "Saturation";
- case V4L2_CID_HUE: return "Hue";
- case V4L2_CID_AUDIO_VOLUME: return "Volume";
- case V4L2_CID_AUDIO_BALANCE: return "Balance";
- case V4L2_CID_AUDIO_BASS: return "Bass";
- case V4L2_CID_AUDIO_TREBLE: return "Treble";
- case V4L2_CID_AUDIO_MUTE: return "Mute";
- case V4L2_CID_AUDIO_LOUDNESS: return "Loudness";
- case V4L2_CID_BLACK_LEVEL: return "Black Level";
- case V4L2_CID_AUTO_WHITE_BALANCE: return "White Balance, Automatic";
- case V4L2_CID_DO_WHITE_BALANCE: return "Do White Balance";
- case V4L2_CID_RED_BALANCE: return "Red Balance";
- case V4L2_CID_BLUE_BALANCE: return "Blue Balance";
- case V4L2_CID_GAMMA: return "Gamma";
- case V4L2_CID_EXPOSURE: return "Exposure";
- case V4L2_CID_AUTOGAIN: return "Gain, Automatic";
- case V4L2_CID_GAIN: return "Gain";
- case V4L2_CID_HFLIP: return "Horizontal Flip";
- case V4L2_CID_VFLIP: return "Vertical Flip";
- case V4L2_CID_HCENTER: return "Horizontal Center";
- case V4L2_CID_VCENTER: return "Vertical Center";
- case V4L2_CID_POWER_LINE_FREQUENCY: return "Power Line Frequency";
- case V4L2_CID_HUE_AUTO: return "Hue, Automatic";
- case V4L2_CID_WHITE_BALANCE_TEMPERATURE: return "White Balance Temperature";
- case V4L2_CID_SHARPNESS: return "Sharpness";
- case V4L2_CID_BACKLIGHT_COMPENSATION: return "Backlight Compensation";
- case V4L2_CID_CHROMA_AGC: return "Chroma AGC";
- case V4L2_CID_CHROMA_GAIN: return "Chroma Gain";
- case V4L2_CID_COLOR_KILLER: return "Color Killer";
- case V4L2_CID_COLORFX: return "Color Effects";
- case V4L2_CID_AUTOBRIGHTNESS: return "Brightness, Automatic";
- case V4L2_CID_BAND_STOP_FILTER: return "Band-Stop Filter";
- case V4L2_CID_ROTATE: return "Rotate";
- case V4L2_CID_BG_COLOR: return "Background Color";
-
- /* MPEG controls */
- case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
- case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
- case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
- case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
- case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
- case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
- case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
- case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
- case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
- case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
- case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
- case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
- case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
- case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
- case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
- case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
- case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size";
- case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure";
- case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown";
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode";
- case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate";
- case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate";
- case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
- case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
- case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV";
- case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
- case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
- case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
- case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
- case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
- case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
- case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
- case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
-
- /* CAMERA controls */
- case V4L2_CID_CAMERA_CLASS: return "Camera Controls";
- case V4L2_CID_EXPOSURE_AUTO: return "Auto Exposure";
- case V4L2_CID_EXPOSURE_ABSOLUTE: return "Exposure Time, Absolute";
- case V4L2_CID_EXPOSURE_AUTO_PRIORITY: return "Exposure, Dynamic Framerate";
- case V4L2_CID_PAN_RELATIVE: return "Pan, Relative";
- case V4L2_CID_TILT_RELATIVE: return "Tilt, Relative";
- case V4L2_CID_PAN_RESET: return "Pan, Reset";
- case V4L2_CID_TILT_RESET: return "Tilt, Reset";
- case V4L2_CID_PAN_ABSOLUTE: return "Pan, Absolute";
- case V4L2_CID_TILT_ABSOLUTE: return "Tilt, Absolute";
- case V4L2_CID_FOCUS_ABSOLUTE: return "Focus, Absolute";
- case V4L2_CID_FOCUS_RELATIVE: return "Focus, Relative";
- case V4L2_CID_FOCUS_AUTO: return "Focus, Automatic";
- case V4L2_CID_IRIS_ABSOLUTE: return "Iris, Absolute";
- case V4L2_CID_IRIS_RELATIVE: return "Iris, Relative";
- case V4L2_CID_ZOOM_ABSOLUTE: return "Zoom, Absolute";
- case V4L2_CID_ZOOM_RELATIVE: return "Zoom, Relative";
- case V4L2_CID_ZOOM_CONTINUOUS: return "Zoom, Continuous";
- case V4L2_CID_PRIVACY: return "Privacy";
-
- /* FM Radio Modulator control */
- case V4L2_CID_FM_TX_CLASS: return "FM Radio Modulator Controls";
- case V4L2_CID_RDS_TX_DEVIATION: return "RDS Signal Deviation";
- case V4L2_CID_RDS_TX_PI: return "RDS Program ID";
- case V4L2_CID_RDS_TX_PTY: return "RDS Program Type";
- case V4L2_CID_RDS_TX_PS_NAME: return "RDS PS Name";
- case V4L2_CID_RDS_TX_RADIO_TEXT: return "RDS Radio Text";
- case V4L2_CID_AUDIO_LIMITER_ENABLED: return "Audio Limiter Feature Enabled";
- case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME: return "Audio Limiter Release Time";
- case V4L2_CID_AUDIO_LIMITER_DEVIATION: return "Audio Limiter Deviation";
- case V4L2_CID_AUDIO_COMPRESSION_ENABLED: return "Audio Compression Feature Enabled";
- case V4L2_CID_AUDIO_COMPRESSION_GAIN: return "Audio Compression Gain";
- case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD: return "Audio Compression Threshold";
- case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME: return "Audio Compression Attack Time";
- case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME: return "Audio Compression Release Time";
- case V4L2_CID_PILOT_TONE_ENABLED: return "Pilot Tone Feature Enabled";
- case V4L2_CID_PILOT_TONE_DEVIATION: return "Pilot Tone Deviation";
- case V4L2_CID_PILOT_TONE_FREQUENCY: return "Pilot Tone Frequency";
- case V4L2_CID_TUNE_PREEMPHASIS: return "Pre-emphasis settings";
- case V4L2_CID_TUNE_POWER_LEVEL: return "Tune Power Level";
- case V4L2_CID_TUNE_ANTENNA_CAPACITOR: return "Tune Antenna Capacitor";
-
- default:
- return NULL;
- }
-}
-EXPORT_SYMBOL(v4l2_ctrl_get_name);
-
/* Fill in a struct v4l2_queryctrl */
int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def)
{
- const char *name = v4l2_ctrl_get_name(qctrl->id);
+ const char *name;
+
+ v4l2_ctrl_fill(qctrl->id, &name, &qctrl->type,
+ &min, &max, &step, &def, &qctrl->flags);
- qctrl->flags = 0;
if (name == NULL)
return -EINVAL;
- switch (qctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_LOUDNESS:
- case V4L2_CID_AUTO_WHITE_BALANCE:
- case V4L2_CID_AUTOGAIN:
- case V4L2_CID_HFLIP:
- case V4L2_CID_VFLIP:
- case V4L2_CID_HUE_AUTO:
- case V4L2_CID_CHROMA_AGC:
- case V4L2_CID_COLOR_KILLER:
- case V4L2_CID_MPEG_AUDIO_MUTE:
- case V4L2_CID_MPEG_VIDEO_MUTE:
- case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
- case V4L2_CID_MPEG_VIDEO_PULLDOWN:
- case V4L2_CID_EXPOSURE_AUTO_PRIORITY:
- case V4L2_CID_FOCUS_AUTO:
- case V4L2_CID_PRIVACY:
- case V4L2_CID_AUDIO_LIMITER_ENABLED:
- case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
- case V4L2_CID_PILOT_TONE_ENABLED:
- qctrl->type = V4L2_CTRL_TYPE_BOOLEAN;
- min = 0;
- max = step = 1;
- break;
- case V4L2_CID_PAN_RESET:
- case V4L2_CID_TILT_RESET:
- qctrl->type = V4L2_CTRL_TYPE_BUTTON;
- qctrl->flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
- min = max = step = def = 0;
- break;
- case V4L2_CID_POWER_LINE_FREQUENCY:
- case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
- case V4L2_CID_MPEG_AUDIO_ENCODING:
- case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
- case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
- case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
- case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
- case V4L2_CID_MPEG_AUDIO_MODE:
- case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
- case V4L2_CID_MPEG_AUDIO_EMPHASIS:
- case V4L2_CID_MPEG_AUDIO_CRC:
- case V4L2_CID_MPEG_VIDEO_ENCODING:
- case V4L2_CID_MPEG_VIDEO_ASPECT:
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
- case V4L2_CID_MPEG_STREAM_TYPE:
- case V4L2_CID_MPEG_STREAM_VBI_FMT:
- case V4L2_CID_EXPOSURE_AUTO:
- case V4L2_CID_COLORFX:
- case V4L2_CID_TUNE_PREEMPHASIS:
- qctrl->type = V4L2_CTRL_TYPE_MENU;
- step = 1;
- break;
- case V4L2_CID_RDS_TX_PS_NAME:
- case V4L2_CID_RDS_TX_RADIO_TEXT:
- qctrl->type = V4L2_CTRL_TYPE_STRING;
- break;
- case V4L2_CID_USER_CLASS:
- case V4L2_CID_CAMERA_CLASS:
- case V4L2_CID_MPEG_CLASS:
- case V4L2_CID_FM_TX_CLASS:
- qctrl->type = V4L2_CTRL_TYPE_CTRL_CLASS;
- qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- min = max = step = def = 0;
- break;
- case V4L2_CID_BG_COLOR:
- qctrl->type = V4L2_CTRL_TYPE_INTEGER;
- step = 1;
- min = 0;
- /* Max is calculated as RGB888 that is 2^24 */
- max = 0xFFFFFF;
- break;
- default:
- qctrl->type = V4L2_CTRL_TYPE_INTEGER;
- break;
- }
- switch (qctrl->id) {
- case V4L2_CID_MPEG_AUDIO_ENCODING:
- case V4L2_CID_MPEG_AUDIO_MODE:
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
- case V4L2_CID_MPEG_VIDEO_B_FRAMES:
- case V4L2_CID_MPEG_STREAM_TYPE:
- qctrl->flags |= V4L2_CTRL_FLAG_UPDATE;
- break;
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_CONTRAST:
- case V4L2_CID_SATURATION:
- case V4L2_CID_HUE:
- case V4L2_CID_RED_BALANCE:
- case V4L2_CID_BLUE_BALANCE:
- case V4L2_CID_GAMMA:
- case V4L2_CID_SHARPNESS:
- case V4L2_CID_CHROMA_GAIN:
- case V4L2_CID_RDS_TX_DEVIATION:
- case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
- case V4L2_CID_AUDIO_LIMITER_DEVIATION:
- case V4L2_CID_AUDIO_COMPRESSION_GAIN:
- case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
- case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
- case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
- case V4L2_CID_PILOT_TONE_DEVIATION:
- case V4L2_CID_PILOT_TONE_FREQUENCY:
- case V4L2_CID_TUNE_POWER_LEVEL:
- case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
- qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
- break;
- case V4L2_CID_PAN_RELATIVE:
- case V4L2_CID_TILT_RELATIVE:
- case V4L2_CID_FOCUS_RELATIVE:
- case V4L2_CID_IRIS_RELATIVE:
- case V4L2_CID_ZOOM_RELATIVE:
- qctrl->flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
- break;
- }
qctrl->minimum = min;
qctrl->maximum = max;
qctrl->step = step;
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
new file mode 100644
index 0000000000000..8489894ee4279
--- /dev/null
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -0,0 +1,1847 @@
+/*
+ V4L2 controls framework implementation.
+
+ Copyright (C) 2010 Hans Verkuil <hverkuil@xs4all.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/ctype.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+
+/* Internal temporary helper struct, one for each v4l2_ext_control */
+struct ctrl_helper {
+ /* The control corresponding to the v4l2_ext_control ID field. */
+ struct v4l2_ctrl *ctrl;
+ /* Used internally to mark whether this control was already
+ processed. */
+ bool handled;
+};
+
+/* Returns NULL or a character pointer array containing the menu for
+ the given control ID. The pointer array ends with a NULL pointer.
+ An empty string signifies a menu entry that is invalid. This allows
+ drivers to disable certain options if it is not supported. */
+const char **v4l2_ctrl_get_menu(u32 id)
+{
+ static const char *mpeg_audio_sampling_freq[] = {
+ "44.1 kHz",
+ "48 kHz",
+ "32 kHz",
+ NULL
+ };
+ static const char *mpeg_audio_encoding[] = {
+ "MPEG-1/2 Layer I",
+ "MPEG-1/2 Layer II",
+ "MPEG-1/2 Layer III",
+ "MPEG-2/4 AAC",
+ "AC-3",
+ NULL
+ };
+ static const char *mpeg_audio_l1_bitrate[] = {
+ "32 kbps",
+ "64 kbps",
+ "96 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "288 kbps",
+ "320 kbps",
+ "352 kbps",
+ "384 kbps",
+ "416 kbps",
+ "448 kbps",
+ NULL
+ };
+ static const char *mpeg_audio_l2_bitrate[] = {
+ "32 kbps",
+ "48 kbps",
+ "56 kbps",
+ "64 kbps",
+ "80 kbps",
+ "96 kbps",
+ "112 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "320 kbps",
+ "384 kbps",
+ NULL
+ };
+ static const char *mpeg_audio_l3_bitrate[] = {
+ "32 kbps",
+ "40 kbps",
+ "48 kbps",
+ "56 kbps",
+ "64 kbps",
+ "80 kbps",
+ "96 kbps",
+ "112 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "320 kbps",
+ NULL
+ };
+ static const char *mpeg_audio_ac3_bitrate[] = {
+ "32 kbps",
+ "40 kbps",
+ "48 kbps",
+ "56 kbps",
+ "64 kbps",
+ "80 kbps",
+ "96 kbps",
+ "112 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "320 kbps",
+ "384 kbps",
+ "448 kbps",
+ "512 kbps",
+ "576 kbps",
+ "640 kbps",
+ NULL
+ };
+ static const char *mpeg_audio_mode[] = {
+ "Stereo",
+ "Joint Stereo",
+ "Dual",
+ "Mono",
+ NULL
+ };
+ static const char *mpeg_audio_mode_extension[] = {
+ "Bound 4",
+ "Bound 8",
+ "Bound 12",
+ "Bound 16",
+ NULL
+ };
+ static const char *mpeg_audio_emphasis[] = {
+ "No Emphasis",
+ "50/15 us",
+ "CCITT J17",
+ NULL
+ };
+ static const char *mpeg_audio_crc[] = {
+ "No CRC",
+ "16-bit CRC",
+ NULL
+ };
+ static const char *mpeg_video_encoding[] = {
+ "MPEG-1",
+ "MPEG-2",
+ "MPEG-4 AVC",
+ NULL
+ };
+ static const char *mpeg_video_aspect[] = {
+ "1x1",
+ "4x3",
+ "16x9",
+ "2.21x1",
+ NULL
+ };
+ static const char *mpeg_video_bitrate_mode[] = {
+ "Variable Bitrate",
+ "Constant Bitrate",
+ NULL
+ };
+ static const char *mpeg_stream_type[] = {
+ "MPEG-2 Program Stream",
+ "MPEG-2 Transport Stream",
+ "MPEG-1 System Stream",
+ "MPEG-2 DVD-compatible Stream",
+ "MPEG-1 VCD-compatible Stream",
+ "MPEG-2 SVCD-compatible Stream",
+ NULL
+ };
+ static const char *mpeg_stream_vbi_fmt[] = {
+ "No VBI",
+ "Private packet, IVTV format",
+ NULL
+ };
+ static const char *camera_power_line_frequency[] = {
+ "Disabled",
+ "50 Hz",
+ "60 Hz",
+ NULL
+ };
+ static const char *camera_exposure_auto[] = {
+ "Auto Mode",
+ "Manual Mode",
+ "Shutter Priority Mode",
+ "Aperture Priority Mode",
+ NULL
+ };
+ static const char *colorfx[] = {
+ "None",
+ "Black & White",
+ "Sepia",
+ "Negative",
+ "Emboss",
+ "Sketch",
+ "Sky blue",
+ "Grass green",
+ "Skin whiten",
+ "Vivid",
+ NULL
+ };
+ static const char *tune_preemphasis[] = {
+ "No preemphasis",
+ "50 useconds",
+ "75 useconds",
+ NULL,
+ };
+
+ switch (id) {
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+ return mpeg_audio_sampling_freq;
+ case V4L2_CID_MPEG_AUDIO_ENCODING:
+ return mpeg_audio_encoding;
+ case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
+ return mpeg_audio_l1_bitrate;
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
+ return mpeg_audio_l2_bitrate;
+ case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
+ return mpeg_audio_l3_bitrate;
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ return mpeg_audio_ac3_bitrate;
+ case V4L2_CID_MPEG_AUDIO_MODE:
+ return mpeg_audio_mode;
+ case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
+ return mpeg_audio_mode_extension;
+ case V4L2_CID_MPEG_AUDIO_EMPHASIS:
+ return mpeg_audio_emphasis;
+ case V4L2_CID_MPEG_AUDIO_CRC:
+ return mpeg_audio_crc;
+ case V4L2_CID_MPEG_VIDEO_ENCODING:
+ return mpeg_video_encoding;
+ case V4L2_CID_MPEG_VIDEO_ASPECT:
+ return mpeg_video_aspect;
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+ return mpeg_video_bitrate_mode;
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ return mpeg_stream_type;
+ case V4L2_CID_MPEG_STREAM_VBI_FMT:
+ return mpeg_stream_vbi_fmt;
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ return camera_power_line_frequency;
+ case V4L2_CID_EXPOSURE_AUTO:
+ return camera_exposure_auto;
+ case V4L2_CID_COLORFX:
+ return colorfx;
+ case V4L2_CID_TUNE_PREEMPHASIS:
+ return tune_preemphasis;
+ default:
+ return NULL;
+ }
+}
+EXPORT_SYMBOL(v4l2_ctrl_get_menu);
+
+/* Return the control name. */
+const char *v4l2_ctrl_get_name(u32 id)
+{
+ switch (id) {
+ /* USER controls */
+ case V4L2_CID_USER_CLASS: return "User Controls";
+ case V4L2_CID_BRIGHTNESS: return "Brightness";
+ case V4L2_CID_CONTRAST: return "Contrast";
+ case V4L2_CID_SATURATION: return "Saturation";
+ case V4L2_CID_HUE: return "Hue";
+ case V4L2_CID_AUDIO_VOLUME: return "Volume";
+ case V4L2_CID_AUDIO_BALANCE: return "Balance";
+ case V4L2_CID_AUDIO_BASS: return "Bass";
+ case V4L2_CID_AUDIO_TREBLE: return "Treble";
+ case V4L2_CID_AUDIO_MUTE: return "Mute";
+ case V4L2_CID_AUDIO_LOUDNESS: return "Loudness";
+ case V4L2_CID_BLACK_LEVEL: return "Black Level";
+ case V4L2_CID_AUTO_WHITE_BALANCE: return "White Balance, Automatic";
+ case V4L2_CID_DO_WHITE_BALANCE: return "Do White Balance";
+ case V4L2_CID_RED_BALANCE: return "Red Balance";
+ case V4L2_CID_BLUE_BALANCE: return "Blue Balance";
+ case V4L2_CID_GAMMA: return "Gamma";
+ case V4L2_CID_EXPOSURE: return "Exposure";
+ case V4L2_CID_AUTOGAIN: return "Gain, Automatic";
+ case V4L2_CID_GAIN: return "Gain";
+ case V4L2_CID_HFLIP: return "Horizontal Flip";
+ case V4L2_CID_VFLIP: return "Vertical Flip";
+ case V4L2_CID_HCENTER: return "Horizontal Center";
+ case V4L2_CID_VCENTER: return "Vertical Center";
+ case V4L2_CID_POWER_LINE_FREQUENCY: return "Power Line Frequency";
+ case V4L2_CID_HUE_AUTO: return "Hue, Automatic";
+ case V4L2_CID_WHITE_BALANCE_TEMPERATURE: return "White Balance Temperature";
+ case V4L2_CID_SHARPNESS: return "Sharpness";
+ case V4L2_CID_BACKLIGHT_COMPENSATION: return "Backlight Compensation";
+ case V4L2_CID_CHROMA_AGC: return "Chroma AGC";
+ case V4L2_CID_CHROMA_GAIN: return "Chroma Gain";
+ case V4L2_CID_COLOR_KILLER: return "Color Killer";
+ case V4L2_CID_COLORFX: return "Color Effects";
+ case V4L2_CID_AUTOBRIGHTNESS: return "Brightness, Automatic";
+ case V4L2_CID_BAND_STOP_FILTER: return "Band-Stop Filter";
+ case V4L2_CID_ROTATE: return "Rotate";
+ case V4L2_CID_BG_COLOR: return "Background Color";
+
+ /* MPEG controls */
+ case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
+ case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
+ case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
+ case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
+ case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
+ case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
+ case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
+ case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
+ case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
+ case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
+ case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
+ case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
+ case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size";
+ case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure";
+ case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown";
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode";
+ case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate";
+ case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate";
+ case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
+ case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
+ case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV";
+ case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
+ case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
+ case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
+ case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
+ case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
+
+ /* CAMERA controls */
+ case V4L2_CID_CAMERA_CLASS: return "Camera Controls";
+ case V4L2_CID_EXPOSURE_AUTO: return "Auto Exposure";
+ case V4L2_CID_EXPOSURE_ABSOLUTE: return "Exposure Time, Absolute";
+ case V4L2_CID_EXPOSURE_AUTO_PRIORITY: return "Exposure, Dynamic Framerate";
+ case V4L2_CID_PAN_RELATIVE: return "Pan, Relative";
+ case V4L2_CID_TILT_RELATIVE: return "Tilt, Relative";
+ case V4L2_CID_PAN_RESET: return "Pan, Reset";
+ case V4L2_CID_TILT_RESET: return "Tilt, Reset";
+ case V4L2_CID_PAN_ABSOLUTE: return "Pan, Absolute";
+ case V4L2_CID_TILT_ABSOLUTE: return "Tilt, Absolute";
+ case V4L2_CID_FOCUS_ABSOLUTE: return "Focus, Absolute";
+ case V4L2_CID_FOCUS_RELATIVE: return "Focus, Relative";
+ case V4L2_CID_FOCUS_AUTO: return "Focus, Automatic";
+ case V4L2_CID_IRIS_ABSOLUTE: return "Iris, Absolute";
+ case V4L2_CID_IRIS_RELATIVE: return "Iris, Relative";
+ case V4L2_CID_ZOOM_ABSOLUTE: return "Zoom, Absolute";
+ case V4L2_CID_ZOOM_RELATIVE: return "Zoom, Relative";
+ case V4L2_CID_ZOOM_CONTINUOUS: return "Zoom, Continuous";
+ case V4L2_CID_PRIVACY: return "Privacy";
+
+ /* FM Radio Modulator control */
+ case V4L2_CID_FM_TX_CLASS: return "FM Radio Modulator Controls";
+ case V4L2_CID_RDS_TX_DEVIATION: return "RDS Signal Deviation";
+ case V4L2_CID_RDS_TX_PI: return "RDS Program ID";
+ case V4L2_CID_RDS_TX_PTY: return "RDS Program Type";
+ case V4L2_CID_RDS_TX_PS_NAME: return "RDS PS Name";
+ case V4L2_CID_RDS_TX_RADIO_TEXT: return "RDS Radio Text";
+ case V4L2_CID_AUDIO_LIMITER_ENABLED: return "Audio Limiter Feature Enabled";
+ case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME: return "Audio Limiter Release Time";
+ case V4L2_CID_AUDIO_LIMITER_DEVIATION: return "Audio Limiter Deviation";
+ case V4L2_CID_AUDIO_COMPRESSION_ENABLED: return "Audio Compression Feature Enabled";
+ case V4L2_CID_AUDIO_COMPRESSION_GAIN: return "Audio Compression Gain";
+ case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD: return "Audio Compression Threshold";
+ case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME: return "Audio Compression Attack Time";
+ case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME: return "Audio Compression Release Time";
+ case V4L2_CID_PILOT_TONE_ENABLED: return "Pilot Tone Feature Enabled";
+ case V4L2_CID_PILOT_TONE_DEVIATION: return "Pilot Tone Deviation";
+ case V4L2_CID_PILOT_TONE_FREQUENCY: return "Pilot Tone Frequency";
+ case V4L2_CID_TUNE_PREEMPHASIS: return "Pre-emphasis settings";
+ case V4L2_CID_TUNE_POWER_LEVEL: return "Tune Power Level";
+ case V4L2_CID_TUNE_ANTENNA_CAPACITOR: return "Tune Antenna Capacitor";
+
+ default:
+ return NULL;
+ }
+}
+EXPORT_SYMBOL(v4l2_ctrl_get_name);
+
+void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+ s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags)
+{
+ *name = v4l2_ctrl_get_name(id);
+ *flags = 0;
+
+ switch (id) {
+ case V4L2_CID_AUDIO_MUTE:
+ case V4L2_CID_AUDIO_LOUDNESS:
+ case V4L2_CID_AUTO_WHITE_BALANCE:
+ case V4L2_CID_AUTOGAIN:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HUE_AUTO:
+ case V4L2_CID_CHROMA_AGC:
+ case V4L2_CID_COLOR_KILLER:
+ case V4L2_CID_MPEG_AUDIO_MUTE:
+ case V4L2_CID_MPEG_VIDEO_MUTE:
+ case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
+ case V4L2_CID_MPEG_VIDEO_PULLDOWN:
+ case V4L2_CID_EXPOSURE_AUTO_PRIORITY:
+ case V4L2_CID_FOCUS_AUTO:
+ case V4L2_CID_PRIVACY:
+ case V4L2_CID_AUDIO_LIMITER_ENABLED:
+ case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+ case V4L2_CID_PILOT_TONE_ENABLED:
+ *type = V4L2_CTRL_TYPE_BOOLEAN;
+ *min = 0;
+ *max = *step = 1;
+ break;
+ case V4L2_CID_PAN_RESET:
+ case V4L2_CID_TILT_RESET:
+ *type = V4L2_CTRL_TYPE_BUTTON;
+ *flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+ *min = *max = *step = *def = 0;
+ break;
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+ case V4L2_CID_MPEG_AUDIO_ENCODING:
+ case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_MODE:
+ case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
+ case V4L2_CID_MPEG_AUDIO_EMPHASIS:
+ case V4L2_CID_MPEG_AUDIO_CRC:
+ case V4L2_CID_MPEG_VIDEO_ENCODING:
+ case V4L2_CID_MPEG_VIDEO_ASPECT:
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ case V4L2_CID_MPEG_STREAM_VBI_FMT:
+ case V4L2_CID_EXPOSURE_AUTO:
+ case V4L2_CID_COLORFX:
+ case V4L2_CID_TUNE_PREEMPHASIS:
+ *type = V4L2_CTRL_TYPE_MENU;
+ break;
+ case V4L2_CID_RDS_TX_PS_NAME:
+ case V4L2_CID_RDS_TX_RADIO_TEXT:
+ *type = V4L2_CTRL_TYPE_STRING;
+ break;
+ case V4L2_CID_USER_CLASS:
+ case V4L2_CID_CAMERA_CLASS:
+ case V4L2_CID_MPEG_CLASS:
+ case V4L2_CID_FM_TX_CLASS:
+ *type = V4L2_CTRL_TYPE_CTRL_CLASS;
+ /* You can neither read not write these */
+ *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
+ *min = *max = *step = *def = 0;
+ break;
+ case V4L2_CID_BG_COLOR:
+ *type = V4L2_CTRL_TYPE_INTEGER;
+ *step = 1;
+ *min = 0;
+ /* Max is calculated as RGB888 that is 2^24 */
+ *max = 0xFFFFFF;
+ break;
+ default:
+ *type = V4L2_CTRL_TYPE_INTEGER;
+ break;
+ }
+ switch (id) {
+ case V4L2_CID_MPEG_AUDIO_ENCODING:
+ case V4L2_CID_MPEG_AUDIO_MODE:
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES:
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ *flags |= V4L2_CTRL_FLAG_UPDATE;
+ break;
+ case V4L2_CID_AUDIO_VOLUME:
+ case V4L2_CID_AUDIO_BALANCE:
+ case V4L2_CID_AUDIO_BASS:
+ case V4L2_CID_AUDIO_TREBLE:
+ case V4L2_CID_BRIGHTNESS:
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ case V4L2_CID_RED_BALANCE:
+ case V4L2_CID_BLUE_BALANCE:
+ case V4L2_CID_GAMMA:
+ case V4L2_CID_SHARPNESS:
+ case V4L2_CID_CHROMA_GAIN:
+ case V4L2_CID_RDS_TX_DEVIATION:
+ case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+ case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+ case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+ case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+ case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+ case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+ case V4L2_CID_PILOT_TONE_DEVIATION:
+ case V4L2_CID_PILOT_TONE_FREQUENCY:
+ case V4L2_CID_TUNE_POWER_LEVEL:
+ case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+ *flags |= V4L2_CTRL_FLAG_SLIDER;
+ break;
+ case V4L2_CID_PAN_RELATIVE:
+ case V4L2_CID_TILT_RELATIVE:
+ case V4L2_CID_FOCUS_RELATIVE:
+ case V4L2_CID_IRIS_RELATIVE:
+ case V4L2_CID_ZOOM_RELATIVE:
+ *flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+ break;
+ }
+}
+EXPORT_SYMBOL(v4l2_ctrl_fill);
+
+/* Helper function to determine whether the control type is compatible with
+ VIDIOC_G/S_CTRL. */
+static bool type_is_int(const struct v4l2_ctrl *ctrl)
+{
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_INTEGER64:
+ case V4L2_CTRL_TYPE_STRING:
+ /* Nope, these need v4l2_ext_control */
+ return false;
+ default:
+ return true;
+ }
+}
+
+/* Helper function: copy the current control value back to the caller */
+static int cur_to_user(struct v4l2_ext_control *c,
+ struct v4l2_ctrl *ctrl)
+{
+ u32 len;
+
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_STRING:
+ len = strlen(ctrl->cur.string);
+ if (c->size < len + 1) {
+ c->size = len + 1;
+ return -ENOSPC;
+ }
+ return copy_to_user(c->string, ctrl->cur.string,
+ len + 1) ? -EFAULT : 0;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ c->value64 = ctrl->cur.val64;
+ break;
+ default:
+ c->value = ctrl->cur.val;
+ break;
+ }
+ return 0;
+}
+
+/* Helper function: copy the caller-provider value as the new control value */
+static int user_to_new(struct v4l2_ext_control *c,
+ struct v4l2_ctrl *ctrl)
+{
+ int ret;
+ u32 size;
+
+ ctrl->has_new = 1;
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_INTEGER64:
+ ctrl->val64 = c->value64;
+ break;
+ case V4L2_CTRL_TYPE_STRING:
+ size = c->size;
+ if (size == 0)
+ return -ERANGE;
+ if (size > ctrl->maximum + 1)
+ size = ctrl->maximum + 1;
+ ret = copy_from_user(ctrl->string, c->string, size);
+ if (!ret) {
+ char last = ctrl->string[size - 1];
+
+ ctrl->string[size - 1] = 0;
+ /* If the string was longer than ctrl->maximum,
+ then return an error. */
+ if (strlen(ctrl->string) == ctrl->maximum && last)
+ return -ERANGE;
+ }
+ return ret ? -EFAULT : 0;
+ default:
+ ctrl->val = c->value;
+ break;
+ }
+ return 0;
+}
+
+/* Helper function: copy the new control value back to the caller */
+static int new_to_user(struct v4l2_ext_control *c,
+ struct v4l2_ctrl *ctrl)
+{
+ u32 len;
+
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_STRING:
+ len = strlen(ctrl->string);
+ if (c->size < len + 1) {
+ c->size = ctrl->maximum + 1;
+ return -ENOSPC;
+ }
+ return copy_to_user(c->string, ctrl->string,
+ len + 1) ? -EFAULT : 0;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ c->value64 = ctrl->val64;
+ break;
+ default:
+ c->value = ctrl->val;
+ break;
+ }
+ return 0;
+}
+
+/* Copy the new value to the current value. */
+static void new_to_cur(struct v4l2_ctrl *ctrl)
+{
+ if (ctrl == NULL)
+ return;
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_STRING:
+ /* strings are always 0-terminated */
+ strcpy(ctrl->cur.string, ctrl->string);
+ break;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ ctrl->cur.val64 = ctrl->val64;
+ break;
+ default:
+ ctrl->cur.val = ctrl->val;
+ break;
+ }
+}
+
+/* Copy the current value to the new value */
+static void cur_to_new(struct v4l2_ctrl *ctrl)
+{
+ if (ctrl == NULL)
+ return;
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_STRING:
+ /* strings are always 0-terminated */
+ strcpy(ctrl->string, ctrl->cur.string);
+ break;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ ctrl->val64 = ctrl->cur.val64;
+ break;
+ default:
+ ctrl->val = ctrl->cur.val;
+ break;
+ }
+}
+
+/* Return non-zero if one or more of the controls in the cluster has a new
+ value that differs from the current value. */
+static int cluster_changed(struct v4l2_ctrl *master)
+{
+ int diff = 0;
+ int i;
+
+ for (i = 0; !diff && i < master->ncontrols; i++) {
+ struct v4l2_ctrl *ctrl = master->cluster[i];
+
+ if (ctrl == NULL)
+ continue;
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_BUTTON:
+ /* Button controls are always 'different' */
+ return 1;
+ case V4L2_CTRL_TYPE_STRING:
+ /* strings are always 0-terminated */
+ diff = strcmp(ctrl->string, ctrl->cur.string);
+ break;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ diff = ctrl->val64 != ctrl->cur.val64;
+ break;
+ default:
+ diff = ctrl->val != ctrl->cur.val;
+ break;
+ }
+ }
+ return diff;
+}
+
+/* Validate a new control */
+static int validate_new(struct v4l2_ctrl *ctrl)
+{
+ s32 val = ctrl->val;
+ char *s = ctrl->string;
+ u32 offset;
+ size_t len;
+
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_INTEGER:
+ /* Round towards the closest legal value */
+ val += ctrl->step / 2;
+ if (val < ctrl->minimum)
+ val = ctrl->minimum;
+ if (val > ctrl->maximum)
+ val = ctrl->maximum;
+ offset = val - ctrl->minimum;
+ offset = ctrl->step * (offset / ctrl->step);
+ val = ctrl->minimum + offset;
+ ctrl->val = val;
+ return 0;
+
+ case V4L2_CTRL_TYPE_BOOLEAN:
+ ctrl->val = !!ctrl->val;
+ return 0;
+
+ case V4L2_CTRL_TYPE_MENU:
+ if (val < ctrl->minimum || val > ctrl->maximum)
+ return -ERANGE;
+ if (ctrl->qmenu[val][0] == '\0' ||
+ (ctrl->menu_skip_mask & (1 << val)))
+ return -EINVAL;
+ return 0;
+
+ case V4L2_CTRL_TYPE_BUTTON:
+ case V4L2_CTRL_TYPE_CTRL_CLASS:
+ ctrl->val64 = 0;
+ return 0;
+
+ case V4L2_CTRL_TYPE_INTEGER64:
+ return 0;
+
+ case V4L2_CTRL_TYPE_STRING:
+ len = strlen(s);
+ if (len < ctrl->minimum)
+ return -ERANGE;
+ if ((len - ctrl->minimum) % ctrl->step)
+ return -ERANGE;
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static inline u32 node2id(struct list_head *node)
+{
+ return list_entry(node, struct v4l2_ctrl_ref, node)->ctrl->id;
+}
+
+/* Set the handler's error code if it wasn't set earlier already */
+static inline int handler_set_err(struct v4l2_ctrl_handler *hdl, int err)
+{
+ if (hdl->error == 0)
+ hdl->error = err;
+ return err;
+}
+
+/* Initialize the handler */
+int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl,
+ unsigned nr_of_controls_hint)
+{
+ mutex_init(&hdl->lock);
+ INIT_LIST_HEAD(&hdl->ctrls);
+ INIT_LIST_HEAD(&hdl->ctrl_refs);
+ hdl->nr_of_buckets = 1 + nr_of_controls_hint / 8;
+ hdl->buckets = kzalloc(sizeof(hdl->buckets[0]) * hdl->nr_of_buckets,
+ GFP_KERNEL);
+ hdl->error = hdl->buckets ? 0 : -ENOMEM;
+ return hdl->error;
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_init);
+
+/* Free all controls and control refs */
+void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
+{
+ struct v4l2_ctrl_ref *ref, *next_ref;
+ struct v4l2_ctrl *ctrl, *next_ctrl;
+
+ if (hdl == NULL || hdl->buckets == NULL)
+ return;
+
+ mutex_lock(&hdl->lock);
+ /* Free all nodes */
+ list_for_each_entry_safe(ref, next_ref, &hdl->ctrl_refs, node) {
+ list_del(&ref->node);
+ kfree(ref);
+ }
+ /* Free all controls owned by the handler */
+ list_for_each_entry_safe(ctrl, next_ctrl, &hdl->ctrls, node) {
+ list_del(&ctrl->node);
+ kfree(ctrl);
+ }
+ kfree(hdl->buckets);
+ hdl->buckets = NULL;
+ hdl->cached = NULL;
+ hdl->error = 0;
+ mutex_unlock(&hdl->lock);
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_free);
+
+/* For backwards compatibility: V4L2_CID_PRIVATE_BASE should no longer
+ be used except in G_CTRL, S_CTRL, QUERYCTRL and QUERYMENU when dealing
+ with applications that do not use the NEXT_CTRL flag.
+
+ We just find the n-th private user control. It's O(N), but that should not
+ be an issue in this particular case. */
+static struct v4l2_ctrl_ref *find_private_ref(
+ struct v4l2_ctrl_handler *hdl, u32 id)
+{
+ struct v4l2_ctrl_ref *ref;
+
+ id -= V4L2_CID_PRIVATE_BASE;
+ list_for_each_entry(ref, &hdl->ctrl_refs, node) {
+ /* Search for private user controls that are compatible with
+ VIDIOC_G/S_CTRL. */
+ if (V4L2_CTRL_ID2CLASS(ref->ctrl->id) == V4L2_CTRL_CLASS_USER &&
+ V4L2_CTRL_DRIVER_PRIV(ref->ctrl->id)) {
+ if (!type_is_int(ref->ctrl))
+ continue;
+ if (id == 0)
+ return ref;
+ id--;
+ }
+ }
+ return NULL;
+}
+
+/* Find a control with the given ID. */
+static struct v4l2_ctrl_ref *find_ref(struct v4l2_ctrl_handler *hdl, u32 id)
+{
+ struct v4l2_ctrl_ref *ref;
+ int bucket;
+
+ id &= V4L2_CTRL_ID_MASK;
+
+ /* Old-style private controls need special handling */
+ if (id >= V4L2_CID_PRIVATE_BASE)
+ return find_private_ref(hdl, id);
+ bucket = id % hdl->nr_of_buckets;
+
+ /* Simple optimization: cache the last control found */
+ if (hdl->cached && hdl->cached->ctrl->id == id)
+ return hdl->cached;
+
+ /* Not in cache, search the hash */
+ ref = hdl->buckets ? hdl->buckets[bucket] : NULL;
+ while (ref && ref->ctrl->id != id)
+ ref = ref->next;
+
+ if (ref)
+ hdl->cached = ref; /* cache it! */
+ return ref;
+}
+
+/* Find a control with the given ID. Take the handler's lock first. */
+static struct v4l2_ctrl_ref *find_ref_lock(
+ struct v4l2_ctrl_handler *hdl, u32 id)
+{
+ struct v4l2_ctrl_ref *ref = NULL;
+
+ if (hdl) {
+ mutex_lock(&hdl->lock);
+ ref = find_ref(hdl, id);
+ mutex_unlock(&hdl->lock);
+ }
+ return ref;
+}
+
+/* Find a control with the given ID. */
+struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id)
+{
+ struct v4l2_ctrl_ref *ref = find_ref_lock(hdl, id);
+
+ return ref ? ref->ctrl : NULL;
+}
+EXPORT_SYMBOL(v4l2_ctrl_find);
+
+/* Allocate a new v4l2_ctrl_ref and hook it into the handler. */
+static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_ctrl_ref *ref;
+ struct v4l2_ctrl_ref *new_ref;
+ u32 id = ctrl->id;
+ u32 class_ctrl = V4L2_CTRL_ID2CLASS(id) | 1;
+ int bucket = id % hdl->nr_of_buckets; /* which bucket to use */
+
+ /* Automatically add the control class if it is not yet present. */
+ if (id != class_ctrl && find_ref_lock(hdl, class_ctrl) == NULL)
+ if (!v4l2_ctrl_new_std(hdl, NULL, class_ctrl, 0, 0, 0, 0))
+ return hdl->error;
+
+ if (hdl->error)
+ return hdl->error;
+
+ new_ref = kzalloc(sizeof(*new_ref), GFP_KERNEL);
+ if (!new_ref)
+ return handler_set_err(hdl, -ENOMEM);
+ new_ref->ctrl = ctrl;
+ if (ctrl->handler == hdl) {
+ /* By default each control starts in a cluster of its own.
+ new_ref->ctrl is basically a cluster array with one
+ element, so that's perfect to use as the cluster pointer.
+ But only do this for the handler that owns the control. */
+ ctrl->cluster = &new_ref->ctrl;
+ ctrl->ncontrols = 1;
+ }
+
+ INIT_LIST_HEAD(&new_ref->node);
+
+ mutex_lock(&hdl->lock);
+
+ /* Add immediately at the end of the list if the list is empty, or if
+ the last element in the list has a lower ID.
+ This ensures that when elements are added in ascending order the
+ insertion is an O(1) operation. */
+ if (list_empty(&hdl->ctrl_refs) || id > node2id(hdl->ctrl_refs.prev)) {
+ list_add_tail(&new_ref->node, &hdl->ctrl_refs);
+ goto insert_in_hash;
+ }
+
+ /* Find insert position in sorted list */
+ list_for_each_entry(ref, &hdl->ctrl_refs, node) {
+ if (ref->ctrl->id < id)
+ continue;
+ /* Don't add duplicates */
+ if (ref->ctrl->id == id) {
+ kfree(new_ref);
+ goto unlock;
+ }
+ list_add(&new_ref->node, ref->node.prev);
+ break;
+ }
+
+insert_in_hash:
+ /* Insert the control node in the hash */
+ new_ref->next = hdl->buckets[bucket];
+ hdl->buckets[bucket] = new_ref;
+
+unlock:
+ mutex_unlock(&hdl->lock);
+ return 0;
+}
+
+/* Add a new control */
+static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, const char *name, enum v4l2_ctrl_type type,
+ s32 min, s32 max, u32 step, s32 def,
+ u32 flags, const char **qmenu, void *priv)
+{
+ struct v4l2_ctrl *ctrl;
+ unsigned sz_extra = 0;
+
+ if (hdl->error)
+ return NULL;
+
+ /* Sanity checks */
+ if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE ||
+ def < min || def > max || max < min ||
+ (type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
+ (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
+ (type == V4L2_CTRL_TYPE_STRING && max == 0)) {
+ handler_set_err(hdl, -ERANGE);
+ return NULL;
+ }
+
+ if (type == V4L2_CTRL_TYPE_BUTTON)
+ flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
+ else if (type == V4L2_CTRL_TYPE_CTRL_CLASS)
+ flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ else if (type == V4L2_CTRL_TYPE_STRING)
+ sz_extra += 2 * (max + 1);
+
+ ctrl = kzalloc(sizeof(*ctrl) + sz_extra, GFP_KERNEL);
+ if (ctrl == NULL) {
+ handler_set_err(hdl, -ENOMEM);
+ return NULL;
+ }
+
+ INIT_LIST_HEAD(&ctrl->node);
+ ctrl->handler = hdl;
+ ctrl->ops = ops;
+ ctrl->id = id;
+ ctrl->name = name;
+ ctrl->type = type;
+ ctrl->flags = flags;
+ ctrl->minimum = min;
+ ctrl->maximum = max;
+ ctrl->step = step;
+ ctrl->qmenu = qmenu;
+ ctrl->priv = priv;
+ ctrl->cur.val = ctrl->val = ctrl->default_value = def;
+
+ if (ctrl->type == V4L2_CTRL_TYPE_STRING) {
+ ctrl->cur.string = (char *)&ctrl[1] + sz_extra - (max + 1);
+ ctrl->string = (char *)&ctrl[1] + sz_extra - 2 * (max + 1);
+ if (ctrl->minimum)
+ memset(ctrl->cur.string, ' ', ctrl->minimum);
+ }
+ if (handler_new_ref(hdl, ctrl)) {
+ kfree(ctrl);
+ return NULL;
+ }
+ mutex_lock(&hdl->lock);
+ list_add_tail(&ctrl->node, &hdl->ctrls);
+ mutex_unlock(&hdl->lock);
+ return ctrl;
+}
+
+struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_config *cfg, void *priv)
+{
+ bool is_menu;
+ struct v4l2_ctrl *ctrl;
+ const char *name = cfg->name;
+ const char **qmenu = cfg->qmenu;
+ enum v4l2_ctrl_type type = cfg->type;
+ u32 flags = cfg->flags;
+ s32 min = cfg->min;
+ s32 max = cfg->max;
+ u32 step = cfg->step;
+ s32 def = cfg->def;
+
+ if (name == NULL)
+ v4l2_ctrl_fill(cfg->id, &name, &type, &min, &max, &step,
+ &def, &flags);
+
+ is_menu = (cfg->type == V4L2_CTRL_TYPE_MENU);
+ if (is_menu)
+ WARN_ON(step);
+ else
+ WARN_ON(cfg->menu_skip_mask);
+ if (is_menu && qmenu == NULL)
+ qmenu = v4l2_ctrl_get_menu(cfg->id);
+
+ ctrl = v4l2_ctrl_new(hdl, cfg->ops, cfg->id, name,
+ type, min, max,
+ is_menu ? cfg->menu_skip_mask : step,
+ def, flags, qmenu, priv);
+ if (ctrl) {
+ ctrl->is_private = cfg->is_private;
+ ctrl->is_volatile = cfg->is_volatile;
+ }
+ return ctrl;
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_custom);
+
+/* Helper function for standard non-menu controls */
+struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 min, s32 max, u32 step, s32 def)
+{
+ const char *name;
+ enum v4l2_ctrl_type type;
+ u32 flags;
+
+ v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
+ if (type == V4L2_CTRL_TYPE_MENU) {
+ handler_set_err(hdl, -EINVAL);
+ return NULL;
+ }
+ return v4l2_ctrl_new(hdl, ops, id, name, type,
+ min, max, step, def, flags, NULL, NULL);
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_std);
+
+/* Helper function for standard menu controls */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 max, s32 mask, s32 def)
+{
+ const char **qmenu = v4l2_ctrl_get_menu(id);
+ const char *name;
+ enum v4l2_ctrl_type type;
+ s32 min;
+ s32 step;
+ u32 flags;
+
+ v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
+ if (type != V4L2_CTRL_TYPE_MENU) {
+ handler_set_err(hdl, -EINVAL);
+ return NULL;
+ }
+ return v4l2_ctrl_new(hdl, ops, id, name, type,
+ 0, max, mask, def, flags, qmenu, NULL);
+}
+EXPORT_SYMBOL(v4l2_ctrl_new_std_menu);
+
+/* Add a control from another handler to this handler */
+struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl *ctrl)
+{
+ if (hdl == NULL || hdl->error)
+ return NULL;
+ if (ctrl == NULL) {
+ handler_set_err(hdl, -EINVAL);
+ return NULL;
+ }
+ if (ctrl->handler == hdl)
+ return ctrl;
+ return handler_new_ref(hdl, ctrl) ? NULL : ctrl;
+}
+EXPORT_SYMBOL(v4l2_ctrl_add_ctrl);
+
+/* Add the controls from another handler to our own. */
+int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl_handler *add)
+{
+ struct v4l2_ctrl *ctrl;
+ int ret = 0;
+
+ /* Do nothing if either handler is NULL or if they are the same */
+ if (!hdl || !add || hdl == add)
+ return 0;
+ if (hdl->error)
+ return hdl->error;
+ mutex_lock(&add->lock);
+ list_for_each_entry(ctrl, &add->ctrls, node) {
+ /* Skip handler-private controls. */
+ if (ctrl->is_private)
+ continue;
+ ret = handler_new_ref(hdl, ctrl);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&add->lock);
+ return ret;
+}
+EXPORT_SYMBOL(v4l2_ctrl_add_handler);
+
+/* Cluster controls */
+void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
+{
+ int i;
+
+ /* The first control is the master control and it must not be NULL */
+ BUG_ON(controls[0] == NULL);
+
+ for (i = 0; i < ncontrols; i++) {
+ if (controls[i]) {
+ controls[i]->cluster = controls;
+ controls[i]->ncontrols = ncontrols;
+ }
+ }
+}
+EXPORT_SYMBOL(v4l2_ctrl_cluster);
+
+/* Activate/deactivate a control. */
+void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active)
+{
+ if (ctrl == NULL)
+ return;
+
+ if (!active)
+ /* set V4L2_CTRL_FLAG_INACTIVE */
+ set_bit(4, &ctrl->flags);
+ else
+ /* clear V4L2_CTRL_FLAG_INACTIVE */
+ clear_bit(4, &ctrl->flags);
+}
+EXPORT_SYMBOL(v4l2_ctrl_activate);
+
+/* Grab/ungrab a control.
+ Typically used when streaming starts and you want to grab controls,
+ preventing the user from changing them.
+
+ Just call this and the framework will block any attempts to change
+ these controls. */
+void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed)
+{
+ if (ctrl == NULL)
+ return;
+
+ if (grabbed)
+ /* set V4L2_CTRL_FLAG_GRABBED */
+ set_bit(1, &ctrl->flags);
+ else
+ /* clear V4L2_CTRL_FLAG_GRABBED */
+ clear_bit(1, &ctrl->flags);
+}
+EXPORT_SYMBOL(v4l2_ctrl_grab);
+
+/* Log the control name and value */
+static void log_ctrl(const struct v4l2_ctrl *ctrl,
+ const char *prefix, const char *colon)
+{
+ int fl_inact = ctrl->flags & V4L2_CTRL_FLAG_INACTIVE;
+ int fl_grabbed = ctrl->flags & V4L2_CTRL_FLAG_GRABBED;
+
+ if (ctrl->flags & (V4L2_CTRL_FLAG_DISABLED | V4L2_CTRL_FLAG_WRITE_ONLY))
+ return;
+ if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS)
+ return;
+
+ printk(KERN_INFO "%s%s%s: ", prefix, colon, ctrl->name);
+
+ switch (ctrl->type) {
+ case V4L2_CTRL_TYPE_INTEGER:
+ printk(KERN_CONT "%d", ctrl->cur.val);
+ break;
+ case V4L2_CTRL_TYPE_BOOLEAN:
+ printk(KERN_CONT "%s", ctrl->cur.val ? "true" : "false");
+ break;
+ case V4L2_CTRL_TYPE_MENU:
+ printk(KERN_CONT "%s", ctrl->qmenu[ctrl->cur.val]);
+ break;
+ case V4L2_CTRL_TYPE_INTEGER64:
+ printk(KERN_CONT "%lld", ctrl->cur.val64);
+ break;
+ case V4L2_CTRL_TYPE_STRING:
+ printk(KERN_CONT "%s", ctrl->cur.string);
+ break;
+ default:
+ printk(KERN_CONT "unknown type %d", ctrl->type);
+ break;
+ }
+ if (fl_inact && fl_grabbed)
+ printk(KERN_CONT " (inactive, grabbed)\n");
+ else if (fl_inact)
+ printk(KERN_CONT " (inactive)\n");
+ else if (fl_grabbed)
+ printk(KERN_CONT " (grabbed)\n");
+ else
+ printk(KERN_CONT "\n");
+}
+
+/* Log all controls owned by the handler */
+void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
+ const char *prefix)
+{
+ struct v4l2_ctrl *ctrl;
+ const char *colon = "";
+ int len;
+
+ if (hdl == NULL)
+ return;
+ if (prefix == NULL)
+ prefix = "";
+ len = strlen(prefix);
+ if (len && prefix[len - 1] != ' ')
+ colon = ": ";
+ mutex_lock(&hdl->lock);
+ list_for_each_entry(ctrl, &hdl->ctrls, node)
+ if (!(ctrl->flags & V4L2_CTRL_FLAG_DISABLED))
+ log_ctrl(ctrl, prefix, colon);
+ mutex_unlock(&hdl->lock);
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_log_status);
+
+/* Call s_ctrl for all controls owned by the handler */
+int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
+{
+ struct v4l2_ctrl *ctrl;
+ int ret = 0;
+
+ if (hdl == NULL)
+ return 0;
+ mutex_lock(&hdl->lock);
+ list_for_each_entry(ctrl, &hdl->ctrls, node)
+ ctrl->done = false;
+
+ list_for_each_entry(ctrl, &hdl->ctrls, node) {
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+ int i;
+
+ /* Skip if this control was already handled by a cluster. */
+ if (ctrl->done)
+ continue;
+
+ for (i = 0; i < master->ncontrols; i++)
+ cur_to_new(master->cluster[i]);
+
+ /* Skip button controls and read-only controls. */
+ if (ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
+ (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
+ continue;
+ ret = master->ops->s_ctrl(master);
+ if (ret)
+ break;
+ for (i = 0; i < master->ncontrols; i++)
+ if (master->cluster[i])
+ master->cluster[i]->done = true;
+ }
+ mutex_unlock(&hdl->lock);
+ return ret;
+}
+EXPORT_SYMBOL(v4l2_ctrl_handler_setup);
+
+/* Implement VIDIOC_QUERYCTRL */
+int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc)
+{
+ u32 id = qc->id & V4L2_CTRL_ID_MASK;
+ struct v4l2_ctrl_ref *ref;
+ struct v4l2_ctrl *ctrl;
+
+ if (hdl == NULL)
+ return -EINVAL;
+
+ mutex_lock(&hdl->lock);
+
+ /* Try to find it */
+ ref = find_ref(hdl, id);
+
+ if ((qc->id & V4L2_CTRL_FLAG_NEXT_CTRL) && !list_empty(&hdl->ctrl_refs)) {
+ /* Find the next control with ID > qc->id */
+
+ /* Did we reach the end of the control list? */
+ if (id >= node2id(hdl->ctrl_refs.prev)) {
+ ref = NULL; /* Yes, so there is no next control */
+ } else if (ref) {
+ /* We found a control with the given ID, so just get
+ the next one in the list. */
+ ref = list_entry(ref->node.next, typeof(*ref), node);
+ } else {
+ /* No control with the given ID exists, so start
+ searching for the next largest ID. We know there
+ is one, otherwise the first 'if' above would have
+ been true. */
+ list_for_each_entry(ref, &hdl->ctrl_refs, node)
+ if (id < ref->ctrl->id)
+ break;
+ }
+ }
+ mutex_unlock(&hdl->lock);
+ if (!ref)
+ return -EINVAL;
+
+ ctrl = ref->ctrl;
+ memset(qc, 0, sizeof(*qc));
+ qc->id = ctrl->id;
+ strlcpy(qc->name, ctrl->name, sizeof(qc->name));
+ qc->minimum = ctrl->minimum;
+ qc->maximum = ctrl->maximum;
+ qc->default_value = ctrl->default_value;
+ if (qc->type == V4L2_CTRL_TYPE_MENU)
+ qc->step = 1;
+ else
+ qc->step = ctrl->step;
+ qc->flags = ctrl->flags;
+ qc->type = ctrl->type;
+ return 0;
+}
+EXPORT_SYMBOL(v4l2_queryctrl);
+
+int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ return v4l2_queryctrl(sd->ctrl_handler, qc);
+}
+EXPORT_SYMBOL(v4l2_subdev_queryctrl);
+
+/* Implement VIDIOC_QUERYMENU */
+int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm)
+{
+ struct v4l2_ctrl *ctrl;
+ u32 i = qm->index;
+
+ ctrl = v4l2_ctrl_find(hdl, qm->id);
+ if (!ctrl)
+ return -EINVAL;
+
+ qm->reserved = 0;
+ /* Sanity checks */
+ if (ctrl->qmenu == NULL ||
+ i < ctrl->minimum || i > ctrl->maximum)
+ return -EINVAL;
+ /* Use mask to see if this menu item should be skipped */
+ if (ctrl->menu_skip_mask & (1 << i))
+ return -EINVAL;
+ /* Empty menu items should also be skipped */
+ if (ctrl->qmenu[i] == NULL || ctrl->qmenu[i][0] == '\0')
+ return -EINVAL;
+ strlcpy(qm->name, ctrl->qmenu[i], sizeof(qm->name));
+ return 0;
+}
+EXPORT_SYMBOL(v4l2_querymenu);
+
+int v4l2_subdev_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qm)
+{
+ return v4l2_querymenu(sd->ctrl_handler, qm);
+}
+EXPORT_SYMBOL(v4l2_subdev_querymenu);
+
+
+
+/* Some general notes on the atomic requirements of VIDIOC_G/TRY/S_EXT_CTRLS:
+
+ It is not a fully atomic operation, just best-effort only. After all, if
+ multiple controls have to be set through multiple i2c writes (for example)
+ then some initial writes may succeed while others fail. Thus leaving the
+ system in an inconsistent state. The question is how much effort you are
+ willing to spend on trying to make something atomic that really isn't.
+
+ From the point of view of an application the main requirement is that
+ when you call VIDIOC_S_EXT_CTRLS and some values are invalid then an
+ error should be returned without actually affecting any controls.
+
+ If all the values are correct, then it is acceptable to just give up
+ in case of low-level errors.
+
+ It is important though that the application can tell when only a partial
+ configuration was done. The way we do that is through the error_idx field
+ of struct v4l2_ext_controls: if that is equal to the count field then no
+ controls were affected. Otherwise all controls before that index were
+ successful in performing their 'get' or 'set' operation, the control at
+ the given index failed, and you don't know what happened with the controls
+ after the failed one. Since if they were part of a control cluster they
+ could have been successfully processed (if a cluster member was encountered
+ at index < error_idx), they could have failed (if a cluster member was at
+ error_idx), or they may not have been processed yet (if the first cluster
+ member appeared after error_idx).
+
+ It is all fairly theoretical, though. In practice all you can do is to
+ bail out. If error_idx == count, then it is an application bug. If
+ error_idx < count then it is only an application bug if the error code was
+ EBUSY. That usually means that something started streaming just when you
+ tried to set the controls. In all other cases it is a driver/hardware
+ problem and all you can do is to retry or bail out.
+
+ Note that these rules do not apply to VIDIOC_TRY_EXT_CTRLS: since that
+ never modifies controls the error_idx is just set to whatever control
+ has an invalid value.
+ */
+
+/* Prepare for the extended g/s/try functions.
+ Find the controls in the control array and do some basic checks. */
+static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ext_controls *cs,
+ struct ctrl_helper *helpers,
+ bool try)
+{
+ u32 i;
+
+ for (i = 0; i < cs->count; i++) {
+ struct v4l2_ext_control *c = &cs->controls[i];
+ struct v4l2_ctrl *ctrl;
+ u32 id = c->id & V4L2_CTRL_ID_MASK;
+
+ if (try)
+ cs->error_idx = i;
+
+ if (cs->ctrl_class && V4L2_CTRL_ID2CLASS(id) != cs->ctrl_class)
+ return -EINVAL;
+
+ /* Old-style private controls are not allowed for
+ extended controls */
+ if (id >= V4L2_CID_PRIVATE_BASE)
+ return -EINVAL;
+ ctrl = v4l2_ctrl_find(hdl, id);
+ if (ctrl == NULL)
+ return -EINVAL;
+ if (ctrl->flags & V4L2_CTRL_FLAG_DISABLED)
+ return -EINVAL;
+
+ helpers[i].ctrl = ctrl;
+ helpers[i].handled = false;
+ }
+ return 0;
+}
+
+typedef int (*cluster_func)(struct v4l2_ext_control *c,
+ struct v4l2_ctrl *ctrl);
+
+/* Walk over all controls in v4l2_ext_controls belonging to the same cluster
+ and call the provided function. */
+static int cluster_walk(unsigned from,
+ struct v4l2_ext_controls *cs,
+ struct ctrl_helper *helpers,
+ cluster_func f)
+{
+ struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
+ int ret = 0;
+ int i;
+
+ /* Find any controls from the same cluster and call the function */
+ for (i = from; !ret && i < cs->count; i++) {
+ struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+
+ if (!helpers[i].handled && ctrl->cluster == cluster)
+ ret = f(&cs->controls[i], ctrl);
+ }
+ return ret;
+}
+
+static void cluster_done(unsigned from,
+ struct v4l2_ext_controls *cs,
+ struct ctrl_helper *helpers)
+{
+ struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
+ int i;
+
+ /* Find any controls from the same cluster and mark them as handled */
+ for (i = from; i < cs->count; i++)
+ if (helpers[i].ctrl->cluster == cluster)
+ helpers[i].handled = true;
+}
+
+/* Handles the corner case where cs->count == 0. It checks whether the
+ specified control class exists. If that class ID is 0, then it checks
+ whether there are any controls at all. */
+static int class_check(struct v4l2_ctrl_handler *hdl, u32 ctrl_class)
+{
+ if (ctrl_class == 0)
+ return list_empty(&hdl->ctrl_refs) ? -EINVAL : 0;
+ return find_ref_lock(hdl, ctrl_class | 1) ? 0 : -EINVAL;
+}
+
+
+
+/* Get extended controls. Allocates the helpers array if needed. */
+int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+ struct ctrl_helper helper[4];
+ struct ctrl_helper *helpers = helper;
+ int ret;
+ int i;
+
+ cs->error_idx = cs->count;
+ cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
+
+ if (hdl == NULL)
+ return -EINVAL;
+
+ if (cs->count == 0)
+ return class_check(hdl, cs->ctrl_class);
+
+ if (cs->count > ARRAY_SIZE(helper)) {
+ helpers = kmalloc(sizeof(helper[0]) * cs->count, GFP_KERNEL);
+ if (helpers == NULL)
+ return -ENOMEM;
+ }
+
+ ret = prepare_ext_ctrls(hdl, cs, helpers, false);
+
+ for (i = 0; !ret && i < cs->count; i++)
+ if (helpers[i].ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
+ ret = -EACCES;
+
+ for (i = 0; !ret && i < cs->count; i++) {
+ struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+
+ if (helpers[i].handled)
+ continue;
+
+ cs->error_idx = i;
+
+ v4l2_ctrl_lock(master);
+ /* g_volatile_ctrl will update the current control values */
+ if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
+ ret = master->ops->g_volatile_ctrl(master);
+ /* If OK, then copy the current control values to the caller */
+ if (!ret)
+ ret = cluster_walk(i, cs, helpers, cur_to_user);
+ v4l2_ctrl_unlock(master);
+ cluster_done(i, cs, helpers);
+ }
+
+ if (cs->count > ARRAY_SIZE(helper))
+ kfree(helpers);
+ return ret;
+}
+EXPORT_SYMBOL(v4l2_g_ext_ctrls);
+
+int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+ return v4l2_g_ext_ctrls(sd->ctrl_handler, cs);
+}
+EXPORT_SYMBOL(v4l2_subdev_g_ext_ctrls);
+
+/* Helper function to get a single control */
+static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
+{
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+ int ret = 0;
+
+ if (ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
+ return -EACCES;
+
+ v4l2_ctrl_lock(master);
+ /* g_volatile_ctrl will update the current control values */
+ if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
+ ret = master->ops->g_volatile_ctrl(master);
+ *val = ctrl->cur.val;
+ v4l2_ctrl_unlock(master);
+ return ret;
+}
+
+int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
+{
+ struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
+
+ if (ctrl == NULL || !type_is_int(ctrl))
+ return -EINVAL;
+ return get_ctrl(ctrl, &control->value);
+}
+EXPORT_SYMBOL(v4l2_g_ctrl);
+
+int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
+{
+ return v4l2_g_ctrl(sd->ctrl_handler, control);
+}
+EXPORT_SYMBOL(v4l2_subdev_g_ctrl);
+
+s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl)
+{
+ s32 val = 0;
+
+ /* It's a driver bug if this happens. */
+ WARN_ON(!type_is_int(ctrl));
+ get_ctrl(ctrl, &val);
+ return val;
+}
+EXPORT_SYMBOL(v4l2_ctrl_g_ctrl);
+
+
+/* Core function that calls try/s_ctrl and ensures that the new value is
+ copied to the current value on a set.
+ Must be called with ctrl->handler->lock held. */
+static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set)
+{
+ bool try = !set;
+ int ret = 0;
+ int i;
+
+ /* Go through the cluster and either validate the new value or
+ (if no new value was set), copy the current value to the new
+ value, ensuring a consistent view for the control ops when
+ called. */
+ for (i = 0; !ret && i < master->ncontrols; i++) {
+ struct v4l2_ctrl *ctrl = master->cluster[i];
+
+ if (ctrl == NULL)
+ continue;
+
+ if (ctrl->has_new) {
+ /* Double check this: it may have changed since the
+ last check in try_or_set_ext_ctrls(). */
+ if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
+ return -EBUSY;
+
+ /* Validate if required */
+ if (!set)
+ ret = validate_new(ctrl);
+ continue;
+ }
+ /* No new value was set, so copy the current and force
+ a call to try_ctrl later, since the values for the cluster
+ may now have changed and the end result might be invalid. */
+ try = true;
+ cur_to_new(ctrl);
+ }
+
+ /* For larger clusters you have to call try_ctrl again to
+ verify that the controls are still valid after the
+ 'cur_to_new' above. */
+ if (!ret && master->ops->try_ctrl && try)
+ ret = master->ops->try_ctrl(master);
+
+ /* Don't set if there is no change */
+ if (!ret && set && cluster_changed(master)) {
+ ret = master->ops->s_ctrl(master);
+ /* If OK, then make the new values permanent. */
+ if (!ret)
+ for (i = 0; i < master->ncontrols; i++)
+ new_to_cur(master->cluster[i]);
+ }
+ return ret;
+}
+
+/* Try or set controls. */
+static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ext_controls *cs,
+ struct ctrl_helper *helpers,
+ bool set)
+{
+ unsigned i, j;
+ int ret = 0;
+
+ cs->error_idx = cs->count;
+ for (i = 0; i < cs->count; i++) {
+ struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+
+ if (!set)
+ cs->error_idx = i;
+
+ if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
+ return -EACCES;
+ /* This test is also done in try_set_control_cluster() which
+ is called in atomic context, so that has the final say,
+ but it makes sense to do an up-front check as well. Once
+ an error occurs in try_set_control_cluster() some other
+ controls may have been set already and we want to do a
+ best-effort to avoid that. */
+ if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
+ return -EBUSY;
+ }
+
+ for (i = 0; !ret && i < cs->count; i++) {
+ struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+
+ cs->error_idx = i;
+
+ if (helpers[i].handled)
+ continue;
+
+ v4l2_ctrl_lock(ctrl);
+
+ /* Reset the 'has_new' flags of the cluster */
+ for (j = 0; j < master->ncontrols; j++)
+ if (master->cluster[j])
+ master->cluster[j]->has_new = 0;
+
+ /* Copy the new caller-supplied control values.
+ user_to_new() sets 'has_new' to 1. */
+ ret = cluster_walk(i, cs, helpers, user_to_new);
+
+ if (!ret)
+ ret = try_or_set_control_cluster(master, set);
+
+ /* Copy the new values back to userspace. */
+ if (!ret)
+ ret = cluster_walk(i, cs, helpers, new_to_user);
+
+ v4l2_ctrl_unlock(ctrl);
+ cluster_done(i, cs, helpers);
+ }
+ return ret;
+}
+
+/* Try or try-and-set controls */
+static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ext_controls *cs,
+ bool set)
+{
+ struct ctrl_helper helper[4];
+ struct ctrl_helper *helpers = helper;
+ int ret;
+ int i;
+
+ cs->error_idx = cs->count;
+ cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
+
+ if (hdl == NULL)
+ return -EINVAL;
+
+ if (cs->count == 0)
+ return class_check(hdl, cs->ctrl_class);
+
+ if (cs->count > ARRAY_SIZE(helper)) {
+ helpers = kmalloc(sizeof(helper[0]) * cs->count, GFP_KERNEL);
+ if (!helpers)
+ return -ENOMEM;
+ }
+ ret = prepare_ext_ctrls(hdl, cs, helpers, !set);
+ if (ret)
+ goto free;
+
+ /* First 'try' all controls and abort on error */
+ ret = try_or_set_ext_ctrls(hdl, cs, helpers, false);
+ /* If this is a 'set' operation and the initial 'try' failed,
+ then set error_idx to count to tell the application that no
+ controls changed value yet. */
+ if (set)
+ cs->error_idx = cs->count;
+ if (!ret && set) {
+ /* Reset 'handled' state */
+ for (i = 0; i < cs->count; i++)
+ helpers[i].handled = false;
+ ret = try_or_set_ext_ctrls(hdl, cs, helpers, true);
+ }
+
+free:
+ if (cs->count > ARRAY_SIZE(helper))
+ kfree(helpers);
+ return ret;
+}
+
+int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+ return try_set_ext_ctrls(hdl, cs, false);
+}
+EXPORT_SYMBOL(v4l2_try_ext_ctrls);
+
+int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+{
+ return try_set_ext_ctrls(hdl, cs, true);
+}
+EXPORT_SYMBOL(v4l2_s_ext_ctrls);
+
+int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+ return try_set_ext_ctrls(sd->ctrl_handler, cs, false);
+}
+EXPORT_SYMBOL(v4l2_subdev_try_ext_ctrls);
+
+int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
+{
+ return try_set_ext_ctrls(sd->ctrl_handler, cs, true);
+}
+EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls);
+
+/* Helper function for VIDIOC_S_CTRL compatibility */
+static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
+{
+ struct v4l2_ctrl *master = ctrl->cluster[0];
+ int ret;
+ int i;
+
+ v4l2_ctrl_lock(ctrl);
+
+ /* Reset the 'has_new' flags of the cluster */
+ for (i = 0; i < master->ncontrols; i++)
+ if (master->cluster[i])
+ master->cluster[i]->has_new = 0;
+
+ ctrl->val = *val;
+ ctrl->has_new = 1;
+ ret = try_or_set_control_cluster(master, false);
+ if (!ret)
+ ret = try_or_set_control_cluster(master, true);
+ *val = ctrl->cur.val;
+ v4l2_ctrl_unlock(ctrl);
+ return ret;
+}
+
+int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
+{
+ struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
+
+ if (ctrl == NULL || !type_is_int(ctrl))
+ return -EINVAL;
+
+ return set_ctrl(ctrl, &control->value);
+}
+EXPORT_SYMBOL(v4l2_s_ctrl);
+
+int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
+{
+ return v4l2_s_ctrl(sd->ctrl_handler, control);
+}
+EXPORT_SYMBOL(v4l2_subdev_s_ctrl);
+
+int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val)
+{
+ /* It's a driver bug if this happens. */
+ WARN_ON(!type_is_int(ctrl));
+ return set_ctrl(ctrl, &val);
+}
+EXPORT_SYMBOL(v4l2_ctrl_s_ctrl);
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
new file mode 100644
index 0000000000000..9b7bea928a884
--- /dev/null
+++ b/include/media/v4l2-ctrls.h
@@ -0,0 +1,460 @@
+/*
+ V4L2 controls support header.
+
+ Copyright (C) 2010 Hans Verkuil <hverkuil@xs4all.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _V4L2_CTRLS_H
+#define _V4L2_CTRLS_H
+
+#include <linux/list.h>
+#include <linux/device.h>
+
+/* forward references */
+struct v4l2_ctrl_handler;
+struct v4l2_ctrl;
+struct video_device;
+struct v4l2_subdev;
+
+/** struct v4l2_ctrl_ops - The control operations that the driver has to provide.
+ * @g_volatile_ctrl: Get a new value for this control. Generally only relevant
+ * for volatile (and usually read-only) controls such as a control
+ * that returns the current signal strength which changes
+ * continuously.
+ * If not set, then the currently cached value will be returned.
+ * @try_ctrl: Test whether the control's value is valid. Only relevant when
+ * the usual min/max/step checks are not sufficient.
+ * @s_ctrl: Actually set the new control value. s_ctrl is compulsory. The
+ * ctrl->handler->lock is held when these ops are called, so no
+ * one else can access controls owned by that handler.
+ */
+struct v4l2_ctrl_ops {
+ int (*g_volatile_ctrl)(struct v4l2_ctrl *ctrl);
+ int (*try_ctrl)(struct v4l2_ctrl *ctrl);
+ int (*s_ctrl)(struct v4l2_ctrl *ctrl);
+};
+
+/** struct v4l2_ctrl - The control structure.
+ * @node: The list node.
+ * @handler: The handler that owns the control.
+ * @cluster: Point to start of cluster array.
+ * @ncontrols: Number of controls in cluster array.
+ * @has_new: Internal flag: set when there is a valid new value.
+ * @done: Internal flag: set for each processed control.
+ * @is_private: If set, then this control is private to its handler and it
+ * will not be added to any other handlers. Drivers can set
+ * this flag.
+ * @is_volatile: If set, then this control is volatile. This means that the
+ * control's current value cannot be cached and needs to be
+ * retrieved through the g_volatile_ctrl op. Drivers can set
+ * this flag.
+ * @ops: The control ops.
+ * @id: The control ID.
+ * @name: The control name.
+ * @type: The control type.
+ * @minimum: The control's minimum value.
+ * @maximum: The control's maximum value.
+ * @default_value: The control's default value.
+ * @step: The control's step value for non-menu controls.
+ * @menu_skip_mask: The control's skip mask for menu controls. This makes it
+ * easy to skip menu items that are not valid. If bit X is set,
+ * then menu item X is skipped. Of course, this only works for
+ * menus with <= 32 menu items. There are no menus that come
+ * close to that number, so this is OK. Should we ever need more,
+ * then this will have to be extended to a u64 or a bit array.
+ * @qmenu: A const char * array for all menu items. Array entries that are
+ * empty strings ("") correspond to non-existing menu items (this
+ * is in addition to the menu_skip_mask above). The last entry
+ * must be NULL.
+ * @flags: The control's flags.
+ * @cur: The control's current value.
+ * @val: The control's new s32 value.
+ * @val64: The control's new s64 value.
+ * @string: The control's new string value.
+ * @priv: The control's private pointer. For use by the driver. It is
+ * untouched by the control framework. Note that this pointer is
+ * not freed when the control is deleted. Should this be needed
+ * then a new internal bitfield can be added to tell the framework
+ * to free this pointer.
+ */
+struct v4l2_ctrl {
+ /* Administrative fields */
+ struct list_head node;
+ struct v4l2_ctrl_handler *handler;
+ struct v4l2_ctrl **cluster;
+ unsigned ncontrols;
+ unsigned int has_new:1;
+ unsigned int done:1;
+
+ unsigned int is_private:1;
+ unsigned int is_volatile:1;
+
+ const struct v4l2_ctrl_ops *ops;
+ u32 id;
+ const char *name;
+ enum v4l2_ctrl_type type;
+ s32 minimum, maximum, default_value;
+ union {
+ u32 step;
+ u32 menu_skip_mask;
+ };
+ const char **qmenu;
+ unsigned long flags;
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ } cur;
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ };
+ void *priv;
+};
+
+/** struct v4l2_ctrl_ref - The control reference.
+ * @node: List node for the sorted list.
+ * @next: Single-link list node for the hash.
+ * @ctrl: The actual control information.
+ *
+ * Each control handler has a list of these refs. The list_head is used to
+ * keep a sorted-by-control-ID list of all controls, while the next pointer
+ * is used to link the control in the hash's bucket.
+ */
+struct v4l2_ctrl_ref {
+ struct list_head node;
+ struct v4l2_ctrl_ref *next;
+ struct v4l2_ctrl *ctrl;
+};
+
+/** struct v4l2_ctrl_handler - The control handler keeps track of all the
+ * controls: both the controls owned by the handler and those inherited
+ * from other handlers.
+ * @lock: Lock to control access to this handler and its controls.
+ * @ctrls: The list of controls owned by this handler.
+ * @ctrl_refs: The list of control references.
+ * @cached: The last found control reference. It is common that the same
+ * control is needed multiple times, so this is a simple
+ * optimization.
+ * @buckets: Buckets for the hashing. Allows for quick control lookup.
+ * @nr_of_buckets: Total number of buckets in the array.
+ * @error: The error code of the first failed control addition.
+ */
+struct v4l2_ctrl_handler {
+ struct mutex lock;
+ struct list_head ctrls;
+ struct list_head ctrl_refs;
+ struct v4l2_ctrl_ref *cached;
+ struct v4l2_ctrl_ref **buckets;
+ u16 nr_of_buckets;
+ int error;
+};
+
+/** struct v4l2_ctrl_config - Control configuration structure.
+ * @ops: The control ops.
+ * @id: The control ID.
+ * @name: The control name.
+ * @type: The control type.
+ * @min: The control's minimum value.
+ * @max: The control's maximum value.
+ * @step: The control's step value for non-menu controls.
+ * @def: The control's default value.
+ * @flags: The control's flags.
+ * @menu_skip_mask: The control's skip mask for menu controls. This makes it
+ * easy to skip menu items that are not valid. If bit X is set,
+ * then menu item X is skipped. Of course, this only works for
+ * menus with <= 32 menu items. There are no menus that come
+ * close to that number, so this is OK. Should we ever need more,
+ * then this will have to be extended to a u64 or a bit array.
+ * @qmenu: A const char * array for all menu items. Array entries that are
+ * empty strings ("") correspond to non-existing menu items (this
+ * is in addition to the menu_skip_mask above). The last entry
+ * must be NULL.
+ * @is_private: If set, then this control is private to its handler and it
+ * will not be added to any other handlers.
+ * @is_volatile: If set, then this control is volatile. This means that the
+ * control's current value cannot be cached and needs to be
+ * retrieved through the g_volatile_ctrl op.
+ */
+struct v4l2_ctrl_config {
+ const struct v4l2_ctrl_ops *ops;
+ u32 id;
+ const char *name;
+ enum v4l2_ctrl_type type;
+ s32 min;
+ s32 max;
+ u32 step;
+ s32 def;
+ u32 flags;
+ u32 menu_skip_mask;
+ const char **qmenu;
+ unsigned int is_private:1;
+ unsigned int is_volatile:1;
+};
+
+/** v4l2_ctrl_fill() - Fill in the control fields based on the control ID.
+ *
+ * This works for all standard V4L2 controls.
+ * For non-standard controls it will only fill in the given arguments
+ * and @name will be NULL.
+ *
+ * This function will overwrite the contents of @name, @type and @flags.
+ * The contents of @min, @max, @step and @def may be modified depending on
+ * the type.
+ *
+ * Do not use in drivers! It is used internally for backwards compatibility
+ * control handling only. Once all drivers are converted to use the new
+ * control framework this function will no longer be exported.
+ */
+void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+ s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags);
+
+
+/** v4l2_ctrl_handler_init() - Initialize the control handler.
+ * @hdl: The control handler.
+ * @nr_of_controls_hint: A hint of how many controls this handler is
+ * expected to refer to. This is the total number, so including
+ * any inherited controls. It doesn't have to be precise, but if
+ * it is way off, then you either waste memory (too many buckets
+ * are allocated) or the control lookup becomes slower (not enough
+ * buckets are allocated, so there are more slow list lookups).
+ * It will always work, though.
+ *
+ * Returns an error if the buckets could not be allocated. This error will
+ * also be stored in @hdl->error.
+ */
+int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl,
+ unsigned nr_of_controls_hint);
+
+/** v4l2_ctrl_handler_free() - Free all controls owned by the handler and free
+ * the control list.
+ * @hdl: The control handler.
+ *
+ * Does nothing if @hdl == NULL.
+ */
+void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl);
+
+/** v4l2_ctrl_handler_setup() - Call the s_ctrl op for all controls belonging
+ * to the handler to initialize the hardware to the current control values.
+ * @hdl: The control handler.
+ *
+ * Button controls will be skipped, as are read-only controls.
+ *
+ * If @hdl == NULL, then this just returns 0.
+ */
+int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl);
+
+/** v4l2_ctrl_handler_log_status() - Log all controls owned by the handler.
+ * @hdl: The control handler.
+ * @prefix: The prefix to use when logging the control values. If the
+ * prefix does not end with a space, then ": " will be added
+ * after the prefix. If @prefix == NULL, then no prefix will be
+ * used.
+ *
+ * For use with VIDIOC_LOG_STATUS.
+ *
+ * Does nothing if @hdl == NULL.
+ */
+void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
+ const char *prefix);
+
+/** v4l2_ctrl_new_custom() - Allocate and initialize a new custom V4L2
+ * control.
+ * @hdl: The control handler.
+ * @cfg: The control's configuration data.
+ * @priv: The control's driver-specific private data.
+ *
+ * If the &v4l2_ctrl struct could not be allocated then NULL is returned
+ * and @hdl->error is set to the error code (if it wasn't set already).
+ */
+struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_config *cfg, void *priv);
+
+/** v4l2_ctrl_new_std() - Allocate and initialize a new standard V4L2 non-menu control.
+ * @hdl: The control handler.
+ * @ops: The control ops.
+ * @id: The control ID.
+ * @min: The control's minimum value.
+ * @max: The control's maximum value.
+ * @step: The control's step value
+ * @def: The control's default value.
+ *
+ * If the &v4l2_ctrl struct could not be allocated, or the control
+ * ID is not known, then NULL is returned and @hdl->error is set to the
+ * appropriate error code (if it wasn't set already).
+ *
+ * If @id refers to a menu control, then this function will return NULL.
+ *
+ * Use v4l2_ctrl_new_std_menu() when adding menu controls.
+ */
+struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 min, s32 max, u32 step, s32 def);
+
+/** v4l2_ctrl_new_std_menu() - Allocate and initialize a new standard V4L2 menu control.
+ * @hdl: The control handler.
+ * @ops: The control ops.
+ * @id: The control ID.
+ * @max: The control's maximum value.
+ * @mask: The control's skip mask for menu controls. This makes it
+ * easy to skip menu items that are not valid. If bit X is set,
+ * then menu item X is skipped. Of course, this only works for
+ * menus with <= 32 menu items. There are no menus that come
+ * close to that number, so this is OK. Should we ever need more,
+ * then this will have to be extended to a u64 or a bit array.
+ * @def: The control's default value.
+ *
+ * Same as v4l2_ctrl_new_std(), but @min is set to 0 and the @mask value
+ * determines which menu items are to be skipped.
+ *
+ * If @id refers to a non-menu control, then this function will return NULL.
+ */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 max, s32 mask, s32 def);
+
+/** v4l2_ctrl_add_ctrl() - Add a control from another handler to this handler.
+ * @hdl: The control handler.
+ * @ctrl: The control to add.
+ *
+ * It will return NULL if it was unable to add the control reference.
+ * If the control already belonged to the handler, then it will do
+ * nothing and just return @ctrl.
+ */
+struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_add_handler() - Add all controls from handler @add to
+ * handler @hdl.
+ * @hdl: The control handler.
+ * @add: The control handler whose controls you want to add to
+ * the @hdl control handler.
+ *
+ * Does nothing if either of the two is a NULL pointer.
+ * In case of an error @hdl->error will be set to the error code (if it
+ * wasn't set already).
+ */
+int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
+ struct v4l2_ctrl_handler *add);
+
+
+/** v4l2_ctrl_cluster() - Mark all controls in the cluster as belonging to that cluster.
+ * @ncontrols: The number of controls in this cluster.
+ * @controls: The cluster control array of size @ncontrols.
+ */
+void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls);
+
+
+/** v4l2_ctrl_find() - Find a control with the given ID.
+ * @hdl: The control handler.
+ * @id: The control ID to find.
+ *
+ * If @hdl == NULL this will return NULL as well. Will lock the handler so
+ * do not use from inside &v4l2_ctrl_ops.
+ */
+struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id);
+
+/** v4l2_ctrl_activate() - Make the control active or inactive.
+ * @ctrl: The control to (de)activate.
+ * @active: True if the control should become active.
+ *
+ * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically.
+ * Does nothing if @ctrl == NULL.
+ * This will usually be called from within the s_ctrl op.
+ *
+ * This function can be called regardless of whether the control handler
+ * is locked or not.
+ */
+void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
+
+/** v4l2_ctrl_grab() - Mark the control as grabbed or not grabbed.
+ * @ctrl: The control to (de)activate.
+ * @grabbed: True if the control should become grabbed.
+ *
+ * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically.
+ * Does nothing if @ctrl == NULL.
+ * This will usually be called when starting or stopping streaming in the
+ * driver.
+ *
+ * This function can be called regardless of whether the control handler
+ * is locked or not.
+ */
+void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
+
+/** v4l2_ctrl_lock() - Helper function to lock the handler
+ * associated with the control.
+ * @ctrl: The control to lock.
+ */
+static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl)
+{
+ mutex_lock(&ctrl->handler->lock);
+}
+
+/** v4l2_ctrl_lock() - Helper function to unlock the handler
+ * associated with the control.
+ * @ctrl: The control to unlock.
+ */
+static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl)
+{
+ mutex_unlock(&ctrl->handler->lock);
+}
+
+/** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver.
+ * @ctrl: The control.
+ *
+ * This returns the control's value safely by going through the control
+ * framework. This function will lock the control's handler, so it cannot be
+ * used from within the &v4l2_ctrl_ops functions.
+ *
+ * This function is for integer type controls only.
+ */
+s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_s_ctrl() - Helper function to set the control's value from within a driver.
+ * @ctrl: The control.
+ * @val: The new value.
+ *
+ * This set the control's new value safely by going through the control
+ * framework. This function will lock the control's handler, so it cannot be
+ * used from within the &v4l2_ctrl_ops functions.
+ *
+ * This function is for integer type controls only.
+ */
+int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+
+/* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */
+int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc);
+int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm);
+int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
+int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
+int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+
+/* Helpers for subdevices. If the associated ctrl_handler == NULL then they
+ will all return -EINVAL. */
+int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
+int v4l2_subdev_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+
+#endif
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index bebe44b03e0fe..1efcacbed01a0 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -27,6 +27,7 @@
struct v4l2_ioctl_callbacks;
struct video_device;
struct v4l2_device;
+struct v4l2_ctrl_handler;
/* Flag to mark the video_device struct as registered.
Drivers can clear this flag if they want to block all future
@@ -67,6 +68,9 @@ struct video_device
struct device *parent; /* device parent */
struct v4l2_device *v4l2_dev; /* v4l2_device parent */
+ /* Control handler associated with this device node. May be NULL. */
+ struct v4l2_ctrl_handler *ctrl_handler;
+
/* device info */
char name[32];
int vfl_type;
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
index 5d5d550e63ad0..8bcbd7a0271cb 100644
--- a/include/media/v4l2-device.h
+++ b/include/media/v4l2-device.h
@@ -32,6 +32,8 @@
#define V4L2_DEVICE_NAME_SIZE (20 + 16)
+struct v4l2_ctrl_handler;
+
struct v4l2_device {
/* dev->driver_data points to this struct.
Note: dev might be NULL if there is no parent device
@@ -47,6 +49,8 @@ struct v4l2_device {
/* notify callback called by some sub-devices. */
void (*notify)(struct v4l2_subdev *sd,
unsigned int notification, void *arg);
+ /* The control handler. May be NULL. */
+ struct v4l2_ctrl_handler *ctrl_handler;
};
/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 08880dd15d2fe..4a97d7341a945 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -35,6 +35,7 @@
#define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ 0x00000001
struct v4l2_device;
+struct v4l2_ctrl_handler;
struct v4l2_subdev;
struct tuner_setup;
@@ -434,6 +435,8 @@ struct v4l2_subdev {
u32 flags;
struct v4l2_device *v4l2_dev;
const struct v4l2_subdev_ops *ops;
+ /* The control handler of this subdev. May be NULL. */
+ struct v4l2_ctrl_handler *ctrl_handler;
/* name must be unique */
char name[V4L2_SUBDEV_NAME_SIZE];
/* can be used to group similar subdevs, value is driver-specific */
--
GitLab
From 6c8d61119373aadd28a89b965e2c03d2887752fa Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 25 Apr 2010 19:21:00 -0300
Subject: [PATCH 500/863] V4L/DVB: v4l2-ctrls: reorder 'case' statements to
match order in header
To make it easier to determine whether all controls are added in v4l2-ctrls.c
the case statements inside the switch are re-ordered to match the header.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/v4l2-ctrls.c | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 8489894ee4279..939243a47f782 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -266,6 +266,7 @@ const char *v4l2_ctrl_get_name(u32 id)
{
switch (id) {
/* USER controls */
+ /* Keep the order of the 'case's the same as in videodev2.h! */
case V4L2_CID_USER_CLASS: return "User Controls";
case V4L2_CID_BRIGHTNESS: return "Brightness";
case V4L2_CID_CONTRAST: return "Contrast";
@@ -296,28 +297,37 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_SHARPNESS: return "Sharpness";
case V4L2_CID_BACKLIGHT_COMPENSATION: return "Backlight Compensation";
case V4L2_CID_CHROMA_AGC: return "Chroma AGC";
- case V4L2_CID_CHROMA_GAIN: return "Chroma Gain";
case V4L2_CID_COLOR_KILLER: return "Color Killer";
case V4L2_CID_COLORFX: return "Color Effects";
case V4L2_CID_AUTOBRIGHTNESS: return "Brightness, Automatic";
case V4L2_CID_BAND_STOP_FILTER: return "Band-Stop Filter";
case V4L2_CID_ROTATE: return "Rotate";
case V4L2_CID_BG_COLOR: return "Background Color";
+ case V4L2_CID_CHROMA_GAIN: return "Chroma Gain";
/* MPEG controls */
+ /* Keep the order of the 'case's the same as in videodev2.h! */
case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
+ case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
+ case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
+ case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
+ case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
+ case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
- case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
- case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
+ case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
@@ -330,16 +340,9 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV";
- case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
- case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
- case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
- case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
- case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
- case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
- case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
- case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
/* CAMERA controls */
+ /* Keep the order of the 'case's the same as in videodev2.h! */
case V4L2_CID_CAMERA_CLASS: return "Camera Controls";
case V4L2_CID_EXPOSURE_AUTO: return "Auto Exposure";
case V4L2_CID_EXPOSURE_ABSOLUTE: return "Exposure Time, Absolute";
@@ -353,14 +356,15 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_FOCUS_ABSOLUTE: return "Focus, Absolute";
case V4L2_CID_FOCUS_RELATIVE: return "Focus, Relative";
case V4L2_CID_FOCUS_AUTO: return "Focus, Automatic";
- case V4L2_CID_IRIS_ABSOLUTE: return "Iris, Absolute";
- case V4L2_CID_IRIS_RELATIVE: return "Iris, Relative";
case V4L2_CID_ZOOM_ABSOLUTE: return "Zoom, Absolute";
case V4L2_CID_ZOOM_RELATIVE: return "Zoom, Relative";
case V4L2_CID_ZOOM_CONTINUOUS: return "Zoom, Continuous";
case V4L2_CID_PRIVACY: return "Privacy";
+ case V4L2_CID_IRIS_ABSOLUTE: return "Iris, Absolute";
+ case V4L2_CID_IRIS_RELATIVE: return "Iris, Relative";
/* FM Radio Modulator control */
+ /* Keep the order of the 'case's the same as in videodev2.h! */
case V4L2_CID_FM_TX_CLASS: return "FM Radio Modulator Controls";
case V4L2_CID_RDS_TX_DEVIATION: return "RDS Signal Deviation";
case V4L2_CID_RDS_TX_PI: return "RDS Program ID";
--
GitLab
From 6dd5aff3cab284556952d96f1112b17299e126d8 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 6 Aug 2010 09:57:02 -0300
Subject: [PATCH 501/863] V4L/DVB: v4l2-ctrls: Whitespace cleanups
Fixes 37 checkpatch.pl warnings like:
WARNING: please, no space before tabs
+^Icase V4L2_CID_MPEG_VIDEO_PULLDOWN: ^Ireturn "Video Pulldown";$
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/v4l2-ctrls.c | 74 ++++++++++++++++----------------
1 file changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 939243a47f782..84c1a53a727ac 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -267,17 +267,17 @@ const char *v4l2_ctrl_get_name(u32 id)
switch (id) {
/* USER controls */
/* Keep the order of the 'case's the same as in videodev2.h! */
- case V4L2_CID_USER_CLASS: return "User Controls";
- case V4L2_CID_BRIGHTNESS: return "Brightness";
- case V4L2_CID_CONTRAST: return "Contrast";
- case V4L2_CID_SATURATION: return "Saturation";
- case V4L2_CID_HUE: return "Hue";
- case V4L2_CID_AUDIO_VOLUME: return "Volume";
- case V4L2_CID_AUDIO_BALANCE: return "Balance";
- case V4L2_CID_AUDIO_BASS: return "Bass";
- case V4L2_CID_AUDIO_TREBLE: return "Treble";
- case V4L2_CID_AUDIO_MUTE: return "Mute";
- case V4L2_CID_AUDIO_LOUDNESS: return "Loudness";
+ case V4L2_CID_USER_CLASS: return "User Controls";
+ case V4L2_CID_BRIGHTNESS: return "Brightness";
+ case V4L2_CID_CONTRAST: return "Contrast";
+ case V4L2_CID_SATURATION: return "Saturation";
+ case V4L2_CID_HUE: return "Hue";
+ case V4L2_CID_AUDIO_VOLUME: return "Volume";
+ case V4L2_CID_AUDIO_BALANCE: return "Balance";
+ case V4L2_CID_AUDIO_BASS: return "Bass";
+ case V4L2_CID_AUDIO_TREBLE: return "Treble";
+ case V4L2_CID_AUDIO_MUTE: return "Mute";
+ case V4L2_CID_AUDIO_LOUDNESS: return "Loudness";
case V4L2_CID_BLACK_LEVEL: return "Black Level";
case V4L2_CID_AUTO_WHITE_BALANCE: return "White Balance, Automatic";
case V4L2_CID_DO_WHITE_BALANCE: return "Do White Balance";
@@ -307,38 +307,38 @@ const char *v4l2_ctrl_get_name(u32 id)
/* MPEG controls */
/* Keep the order of the 'case's the same as in videodev2.h! */
- case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
- case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
- case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
- case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
- case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
- case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
+ case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
+ case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
+ case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
- case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
- case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
- case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
- case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
- case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
+ case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
+ case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
+ case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
+ case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
- case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
- case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
- case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
- case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
- case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
- case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
- case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
- case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
- case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size";
- case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure";
- case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown";
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode";
- case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate";
- case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate";
+ case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
+ case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
+ case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
+ case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
+ case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
+ case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
+ case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size";
+ case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure";
+ case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown";
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode";
+ case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate";
+ case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate";
case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
- case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
+ case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV";
/* CAMERA controls */
--
GitLab
From a42b57f5aacf2b43f3e7931e8b9c609051839aa8 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 1 Aug 2010 14:35:53 -0300
Subject: [PATCH 502/863] V4L/DVB: Documentation: add v4l2-controls.txt
documenting the new controls API
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
Documentation/video4linux/v4l2-controls.txt | 648 ++++++++++++++++++++
1 file changed, 648 insertions(+)
create mode 100644 Documentation/video4linux/v4l2-controls.txt
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
new file mode 100644
index 0000000000000..8773778d23fc6
--- /dev/null
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -0,0 +1,648 @@
+Introduction
+============
+
+The V4L2 control API seems simple enough, but quickly becomes very hard to
+implement correctly in drivers. But much of the code needed to handle controls
+is actually not driver specific and can be moved to the V4L core framework.
+
+After all, the only part that a driver developer is interested in is:
+
+1) How do I add a control?
+2) How do I set the control's value? (i.e. s_ctrl)
+
+And occasionally:
+
+3) How do I get the control's value? (i.e. g_volatile_ctrl)
+4) How do I validate the user's proposed control value? (i.e. try_ctrl)
+
+All the rest is something that can be done centrally.
+
+The control framework was created in order to implement all the rules of the
+V4L2 specification with respect to controls in a central place. And to make
+life as easy as possible for the driver developer.
+
+Note that the control framework relies on the presence of a struct v4l2_device
+for V4L2 drivers and struct v4l2_subdev for sub-device drivers.
+
+
+Objects in the framework
+========================
+
+There are two main objects:
+
+The v4l2_ctrl object describes the control properties and keeps track of the
+control's value (both the current value and the proposed new value).
+
+v4l2_ctrl_handler is the object that keeps track of controls. It maintains a
+list of v4l2_ctrl objects that it owns and another list of references to
+controls, possibly to controls owned by other handlers.
+
+
+Basic usage for V4L2 and sub-device drivers
+===========================================
+
+1) Prepare the driver:
+
+1.1) Add the handler to your driver's top-level struct:
+
+ struct foo_dev {
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ struct foo_dev *foo;
+
+1.2) Initialize the handler:
+
+ v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+
+ The second argument is a hint telling the function how many controls this
+ handler is expected to handle. It will allocate a hashtable based on this
+ information. It is a hint only.
+
+1.3) Hook the control handler into the driver:
+
+1.3.1) For V4L2 drivers do this:
+
+ struct foo_dev {
+ ...
+ struct v4l2_device v4l2_dev;
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
+
+ Where foo->v4l2_dev is of type struct v4l2_device.
+
+ Finally, remove all control functions from your v4l2_ioctl_ops:
+ vidioc_queryctrl, vidioc_querymenu, vidioc_g_ctrl, vidioc_s_ctrl,
+ vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls.
+ Those are now no longer needed.
+
+1.3.2) For sub-device drivers do this:
+
+ struct foo_dev {
+ ...
+ struct v4l2_subdev sd;
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ foo->sd.ctrl_handler = &foo->ctrl_handler;
+
+ Where foo->sd is of type struct v4l2_subdev.
+
+ And set all core control ops in your struct v4l2_subdev_core_ops to these
+ helpers:
+
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+
+ Note: this is a temporary solution only. Once all V4L2 drivers that depend
+ on subdev drivers are converted to the control framework these helpers will
+ no longer be needed.
+
+1.4) Clean up the handler at the end:
+
+ v4l2_ctrl_handler_free(&foo->ctrl_handler);
+
+
+2) Add controls:
+
+You add non-menu controls by calling v4l2_ctrl_new_std:
+
+ struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 min, s32 max, u32 step, s32 def);
+
+Menu controls are added by calling v4l2_ctrl_new_std_menu:
+
+ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 max, s32 skip_mask, s32 def);
+
+These functions are typically called right after the v4l2_ctrl_handler_init:
+
+ v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+ v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1, 128);
+ v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_POWER_LINE_FREQUENCY,
+ V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
+ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED);
+ ...
+ if (foo->ctrl_handler.error) {
+ int err = foo->ctrl_handler.error;
+
+ v4l2_ctrl_handler_free(&foo->ctrl_handler);
+ return err;
+ }
+
+The v4l2_ctrl_new_std function returns the v4l2_ctrl pointer to the new
+control, but if you do not need to access the pointer outside the control ops,
+then there is no need to store it.
+
+The v4l2_ctrl_new_std function will fill in most fields based on the control
+ID except for the min, max, step and default values. These are passed in the
+last four arguments. These values are driver specific while control attributes
+like type, name, flags are all global. The control's current value will be set
+to the default value.
+
+The v4l2_ctrl_new_std_menu function is very similar but it is used for menu
+controls. There is no min argument since that is always 0 for menu controls,
+and instead of a step there is a skip_mask argument: if bit X is 1, then menu
+item X is skipped.
+
+Note that if something fails, the function will return NULL or an error and
+set ctrl_handler->error to the error code. If ctrl_handler->error was already
+set, then it will just return and do nothing. This is also true for
+v4l2_ctrl_handler_init if it cannot allocate the internal data structure.
+
+This makes it easy to init the handler and just add all controls and only check
+the error code at the end. Saves a lot of repetitive error checking.
+
+It is recommended to add controls in ascending control ID order: it will be
+a bit faster that way.
+
+3) Optionally force initial control setup:
+
+ v4l2_ctrl_handler_setup(&foo->ctrl_handler);
+
+This will call s_ctrl for all controls unconditionally. Effectively this
+initializes the hardware to the default control values. It is recommended
+that you do this as this ensures that both the internal data structures and
+the hardware are in sync.
+
+4) Finally: implement the v4l2_ctrl_ops
+
+ static const struct v4l2_ctrl_ops foo_ctrl_ops = {
+ .s_ctrl = foo_s_ctrl,
+ };
+
+Usually all you need is s_ctrl:
+
+ static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ write_reg(0x123, ctrl->val);
+ break;
+ case V4L2_CID_CONTRAST:
+ write_reg(0x456, ctrl->val);
+ break;
+ }
+ return 0;
+ }
+
+The control ops are called with the v4l2_ctrl pointer as argument.
+The new control value has already been validated, so all you need to do is
+to actually update the hardware registers.
+
+You're done! And this is sufficient for most of the drivers we have. No need
+to do any validation of control values, or implement QUERYCTRL/QUERYMENU. And
+G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported.
+
+
+==============================================================================
+
+The remainder of this document deals with more advanced topics and scenarios.
+In practice the basic usage as described above is sufficient for most drivers.
+
+===============================================================================
+
+
+Inheriting Controls
+===================
+
+When a sub-device is registered with a V4L2 driver by calling
+v4l2_device_register_subdev() and the ctrl_handler fields of both v4l2_subdev
+and v4l2_device are set, then the controls of the subdev will become
+automatically available in the V4L2 driver as well. If the subdev driver
+contains controls that already exist in the V4L2 driver, then those will be
+skipped (so a V4L2 driver can always override a subdev control).
+
+What happens here is that v4l2_device_register_subdev() calls
+v4l2_ctrl_add_handler() adding the controls of the subdev to the controls
+of v4l2_device.
+
+
+Accessing Control Values
+========================
+
+The v4l2_ctrl struct contains these two unions:
+
+ /* The current control value. */
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ } cur;
+
+ /* The new control value. */
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ };
+
+Within the control ops you can freely use these. The val and val64 speak for
+themselves. The string pointers point to character buffers of length
+ctrl->maximum + 1, and are always 0-terminated.
+
+In most cases 'cur' contains the current cached control value. When you create
+a new control this value is made identical to the default value. After calling
+v4l2_ctrl_handler_setup() this value is passed to the hardware. It is generally
+a good idea to call this function.
+
+Whenever a new value is set that new value is automatically cached. This means
+that most drivers do not need to implement the g_volatile_ctrl() op. The
+exception is for controls that return a volatile register such as a signal
+strength read-out that changes continuously. In that case you will need to
+implement g_volatile_ctrl like this:
+
+ static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->cur.val = read_reg(0x123);
+ break;
+ }
+ }
+
+The 'new value' union is not used in g_volatile_ctrl. In general controls
+that need to implement g_volatile_ctrl are read-only controls.
+
+To mark a control as volatile you have to set the is_volatile flag:
+
+ ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
+ if (ctrl)
+ ctrl->is_volatile = 1;
+
+For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
+you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
+contains the current value, which you can use (but not change!) as well.
+
+If s_ctrl returns 0 (OK), then the control framework will copy the new final
+values to the 'cur' union.
+
+While in g_volatile/s/try_ctrl you can access the value of all controls owned
+by the same handler since the handler's lock is held. If you need to access
+the value of controls owned by other handlers, then you have to be very careful
+not to introduce deadlocks.
+
+Outside of the control ops you have to go through to helper functions to get
+or set a single control value safely in your driver:
+
+ s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+These functions go through the control framework just as VIDIOC_G/S_CTRL ioctls
+do. Don't use these inside the control ops g_volatile/s/try_ctrl, though, that
+will result in a deadlock since these helpers lock the handler as well.
+
+You can also take the handler lock yourself:
+
+ mutex_lock(&state->ctrl_handler.lock);
+ printk(KERN_INFO "String value is '%s'\n", ctrl1->cur.string);
+ printk(KERN_INFO "Integer value is '%s'\n", ctrl2->cur.val);
+ mutex_unlock(&state->ctrl_handler.lock);
+
+
+Menu Controls
+=============
+
+The v4l2_ctrl struct contains this union:
+
+ union {
+ u32 step;
+ u32 menu_skip_mask;
+ };
+
+For menu controls menu_skip_mask is used. What it does is that it allows you
+to easily exclude certain menu items. This is used in the VIDIOC_QUERYMENU
+implementation where you can return -EINVAL if a certain menu item is not
+present. Note that VIDIOC_QUERYCTRL always returns a step value of 1 for
+menu controls.
+
+A good example is the MPEG Audio Layer II Bitrate menu control where the
+menu is a list of standardized possible bitrates. But in practice hardware
+implementations will only support a subset of those. By setting the skip
+mask you can tell the framework which menu items should be skipped. Setting
+it to 0 means that all menu items are supported.
+
+You set this mask either through the v4l2_ctrl_config struct for a custom
+control, or by calling v4l2_ctrl_new_std_menu().
+
+
+Custom Controls
+===============
+
+Driver specific controls can be created using v4l2_ctrl_new_custom():
+
+ static const struct v4l2_ctrl_config ctrl_filter = {
+ .ops = &ctrl_custom_ops,
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+ .name = "Spatial Filter",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .flags = V4L2_CTRL_FLAG_SLIDER,
+ .max = 15,
+ .step = 1,
+ };
+
+ ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_filter, NULL);
+
+The last argument is the priv pointer which can be set to driver-specific
+private data.
+
+The v4l2_ctrl_config struct also has fields to set the is_private and is_volatile
+flags.
+
+If the name field is not set, then the framework will assume this is a standard
+control and will fill in the name, type and flags fields accordingly.
+
+
+Active and Grabbed Controls
+===========================
+
+If you get more complex relationships between controls, then you may have to
+activate and deactivate controls. For example, if the Chroma AGC control is
+on, then the Chroma Gain control is inactive. That is, you may set it, but
+the value will not be used by the hardware as long as the automatic gain
+control is on. Typically user interfaces can disable such input fields.
+
+You can set the 'active' status using v4l2_ctrl_activate(). By default all
+controls are active. Note that the framework does not check for this flag.
+It is meant purely for GUIs. The function is typically called from within
+s_ctrl.
+
+The other flag is the 'grabbed' flag. A grabbed control means that you cannot
+change it because it is in use by some resource. Typical examples are MPEG
+bitrate controls that cannot be changed while capturing is in progress.
+
+If a control is set to 'grabbed' using v4l2_ctrl_grab(), then the framework
+will return -EBUSY if an attempt is made to set this control. The
+v4l2_ctrl_grab() function is typically called from the driver when it
+starts or stops streaming.
+
+
+Control Clusters
+================
+
+By default all controls are independent from the others. But in more
+complex scenarios you can get dependencies from one control to another.
+In that case you need to 'cluster' them:
+
+ struct foo {
+ struct v4l2_ctrl_handler ctrl_handler;
+#define AUDIO_CL_VOLUME (0)
+#define AUDIO_CL_MUTE (1)
+ struct v4l2_ctrl *audio_cluster[2];
+ ...
+ };
+
+ state->audio_cluster[AUDIO_CL_VOLUME] =
+ v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+ state->audio_cluster[AUDIO_CL_MUTE] =
+ v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+ v4l2_ctrl_cluster(ARRAY_SIZE(state->audio_cluster), state->audio_cluster);
+
+From now on whenever one or more of the controls belonging to the same
+cluster is set (or 'gotten', or 'tried'), only the control ops of the first
+control ('volume' in this example) is called. You effectively create a new
+composite control. Similar to how a 'struct' works in C.
+
+So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
+all two controls belonging to the audio_cluster:
+
+ static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_VOLUME: {
+ struct v4l2_ctrl *mute = ctrl->cluster[AUDIO_CL_MUTE];
+
+ write_reg(0x123, mute->val ? 0 : ctrl->val);
+ break;
+ }
+ case V4L2_CID_CONTRAST:
+ write_reg(0x456, ctrl->val);
+ break;
+ }
+ return 0;
+ }
+
+In the example above the following are equivalent for the VOLUME case:
+
+ ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
+ ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
+
+Note that controls in a cluster may be NULL. For example, if for some
+reason mute was never added (because the hardware doesn't support that
+particular feature), then mute will be NULL. So in that case we have a
+cluster of 2 controls, of which only 1 is actually instantiated. The
+only restriction is that the first control of the cluster must always be
+present, since that is the 'master' control of the cluster. The master
+control is the one that identifies the cluster and that provides the
+pointer to the v4l2_ctrl_ops struct that is used for that cluster.
+
+Obviously, all controls in the cluster array must be initialized to either
+a valid control or to NULL.
+
+
+VIDIOC_LOG_STATUS Support
+=========================
+
+This ioctl allow you to dump the current status of a driver to the kernel log.
+The v4l2_ctrl_handler_log_status(ctrl_handler, prefix) can be used to dump the
+value of the controls owned by the given handler to the log. You can supply a
+prefix as well. If the prefix didn't end with a space, then ': ' will be added
+for you.
+
+
+Different Handlers for Different Video Nodes
+============================================
+
+Usually the V4L2 driver has just one control handler that is global for
+all video nodes. But you can also specify different control handlers for
+different video nodes. You can do that by manually setting the ctrl_handler
+field of struct video_device.
+
+That is no problem if there are no subdevs involved but if there are, then
+you need to block the automatic merging of subdev controls to the global
+control handler. You do that by simply setting the ctrl_handler field in
+struct v4l2_device to NULL. Now v4l2_device_register_subdev() will no longer
+merge subdev controls.
+
+After each subdev was added, you will then have to call v4l2_ctrl_add_handler
+manually to add the subdev's control handler (sd->ctrl_handler) to the desired
+control handler. This control handler may be specific to the video_device or
+for a subset of video_device's. For example: the radio device nodes only have
+audio controls, while the video and vbi device nodes share the same control
+handler for the audio and video controls.
+
+If you want to have one handler (e.g. for a radio device node) have a subset
+of another handler (e.g. for a video device node), then you should first add
+the controls to the first handler, add the other controls to the second
+handler and finally add the first handler to the second. For example:
+
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+ v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler);
+
+Or you can add specific controls to a handler:
+
+ volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
+ v4l2_ctrl_add_ctrl(&radio_ctrl_handler, volume);
+
+What you should not do is make two identical controls for two handlers.
+For example:
+
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
+
+This would be bad since muting the radio would not change the video mute
+control. The rule is to have one control for each hardware 'knob' that you
+can twiddle.
+
+
+Finding Controls
+================
+
+Normally you have created the controls yourself and you can store the struct
+v4l2_ctrl pointer into your own struct.
+
+But sometimes you need to find a control from another handler that you do
+not own. For example, if you have to find a volume control from a subdev.
+
+You can do that by calling v4l2_ctrl_find:
+
+ struct v4l2_ctrl *volume;
+
+ volume = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_AUDIO_VOLUME);
+
+Since v4l2_ctrl_find will lock the handler you have to be careful where you
+use it. For example, this is not a good idea:
+
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+
+...and in video_ops.s_ctrl:
+
+ case V4L2_CID_BRIGHTNESS:
+ contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
+ ...
+
+When s_ctrl is called by the framework the ctrl_handler.lock is already taken, so
+attempting to find another control from the same handler will deadlock.
+
+It is recommended not to use this function from inside the control ops.
+
+
+Inheriting Controls
+===================
+
+When one control handler is added to another using v4l2_ctrl_add_handler, then
+by default all controls from one are merged to the other. But a subdev might
+have low-level controls that make sense for some advanced embedded system, but
+not when it is used in consumer-level hardware. In that case you want to keep
+those low-level controls local to the subdev. You can do this by simply
+setting the 'is_private' flag of the control to 1:
+
+ static const struct v4l2_ctrl_config ctrl_private = {
+ .ops = &ctrl_custom_ops,
+ .id = V4L2_CID_...,
+ .name = "Some Private Control",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .max = 15,
+ .step = 1,
+ .is_private = 1,
+ };
+
+ ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_private, NULL);
+
+These controls will now be skipped when v4l2_ctrl_add_handler is called.
+
+
+V4L2_CTRL_TYPE_CTRL_CLASS Controls
+==================================
+
+Controls of this type can be used by GUIs to get the name of the control class.
+A fully featured GUI can make a dialog with multiple tabs with each tab
+containing the controls belonging to a particular control class. The name of
+each tab can be found by querying a special control with ID <control class | 1>.
+
+Drivers do not have to care about this. The framework will automatically add
+a control of this type whenever the first control belonging to a new control
+class is added.
+
+
+Differences from the Spec
+=========================
+
+There are a few places where the framework acts slightly differently from the
+V4L2 Specification. Those differences are described in this section. We will
+have to see whether we need to adjust the spec or not.
+
+1) It is no longer required to have all controls contained in a
+v4l2_ext_control array be from the same control class. The framework will be
+able to handle any type of control in the array. You need to set ctrl_class
+to 0 in order to enable this. If ctrl_class is non-zero, then it will still
+check that all controls belong to that control class.
+
+If you set ctrl_class to 0 and count to 0, then it will only return an error
+if there are no controls at all.
+
+2) Clarified the way error_idx works. For get and set it will be equal to
+count if nothing was done yet. If it is less than count then only the controls
+up to error_idx-1 were successfully applied.
+
+3) When attempting to read a button control the framework will return -EACCES
+instead of -EINVAL as stated in the spec. It seems to make more sense since
+button controls are write-only controls.
+
+4) Attempting to write to a read-only control will return -EACCES instead of
+-EINVAL as the spec says.
+
+5) The spec does not mention what should happen when you try to set/get a
+control class controls. ivtv currently returns -EINVAL (indicating that the
+control ID does not exist) while the framework will return -EACCES, which
+makes more sense.
+
+
+Proposals for Extensions
+========================
+
+Some ideas for future extensions to the spec:
+
+1) Add a V4L2_CTRL_FLAG_HEX to have values shown as hexadecimal instead of
+decimal. Useful for e.g. video_mute_yuv.
+
+2) It is possible to mark in the controls array which controls have been
+successfully written and which failed by for example adding a bit to the
+control ID. Not sure if it is worth the effort, though.
+
+3) Trying to set volatile inactive controls should result in -EACCESS.
+
+4) Add a new flag to mark volatile controls. Any application that wants
+to store the state of the controls can then skip volatile inactive controls.
+Currently it is not possible to detect such controls.
--
GitLab
From 11bbc1cadb638aaccb4764c6e16807b36b53cf19 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 16 May 2010 09:24:06 -0300
Subject: [PATCH 503/863] V4L/DVB: v4l2: hook up the new control framework into
the core framework
Add the calls needed to automatically merge subdev controls into a bridge
control handler.
Hook up the control framework in __video_ioctl2 and video_register_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/v4l2-dev.c | 8 ++++--
drivers/media/video/v4l2-device.c | 7 +++++
drivers/media/video/v4l2-ioctl.c | 46 ++++++++++++++++++++++---------
3 files changed, 46 insertions(+), 15 deletions(-)
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 9e89bf617790b..21ffd030611eb 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -447,8 +447,12 @@ static int __video_register_device(struct video_device *vdev, int type, int nr,
vdev->vfl_type = type;
vdev->cdev = NULL;
- if (vdev->v4l2_dev && vdev->v4l2_dev->dev)
- vdev->parent = vdev->v4l2_dev->dev;
+ if (vdev->v4l2_dev) {
+ if (vdev->v4l2_dev->dev)
+ vdev->parent = vdev->v4l2_dev->dev;
+ if (vdev->ctrl_handler == NULL)
+ vdev->ctrl_handler = vdev->v4l2_dev->ctrl_handler;
+ }
/* Part 2: find a free minor, device node number and device index. */
#ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 5a7dc4afe92a2..0b08f96b74a5e 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -26,6 +26,7 @@
#endif
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev)
{
@@ -115,6 +116,8 @@ EXPORT_SYMBOL_GPL(v4l2_device_unregister);
int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
struct v4l2_subdev *sd)
{
+ int err;
+
/* Check for valid input */
if (v4l2_dev == NULL || sd == NULL || !sd->name[0])
return -EINVAL;
@@ -122,6 +125,10 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
WARN_ON(sd->v4l2_dev != NULL);
if (!try_module_get(sd->owner))
return -ENODEV;
+ /* This just returns 0 if either of the two args is NULL */
+ err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler);
+ if (err)
+ return err;
sd->v4l2_dev = v4l2_dev;
spin_lock(&v4l2_dev->lock);
list_add_tail(&sd->list, &v4l2_dev->subdevs);
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 0eeceae503293..dd9283fcb5643 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -26,6 +26,7 @@
#endif
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-fh.h>
#include <media/v4l2-event.h>
#include <media/v4l2-chip-ident.h>
@@ -1259,9 +1260,12 @@ static long __video_do_ioctl(struct file *file,
{
struct v4l2_queryctrl *p = arg;
- if (!ops->vidioc_queryctrl)
+ if (vfd->ctrl_handler)
+ ret = v4l2_queryctrl(vfd->ctrl_handler, p);
+ else if (ops->vidioc_queryctrl)
+ ret = ops->vidioc_queryctrl(file, fh, p);
+ else
break;
- ret = ops->vidioc_queryctrl(file, fh, p);
if (!ret)
dbgarg(cmd, "id=0x%x, type=%d, name=%s, min/max=%d/%d, "
"step=%d, default=%d, flags=0x%08x\n",
@@ -1276,7 +1280,9 @@ static long __video_do_ioctl(struct file *file,
{
struct v4l2_control *p = arg;
- if (ops->vidioc_g_ctrl)
+ if (vfd->ctrl_handler)
+ ret = v4l2_g_ctrl(vfd->ctrl_handler, p);
+ else if (ops->vidioc_g_ctrl)
ret = ops->vidioc_g_ctrl(file, fh, p);
else if (ops->vidioc_g_ext_ctrls) {
struct v4l2_ext_controls ctrls;
@@ -1306,11 +1312,16 @@ static long __video_do_ioctl(struct file *file,
struct v4l2_ext_controls ctrls;
struct v4l2_ext_control ctrl;
- if (!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
+ if (!vfd->ctrl_handler &&
+ !ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
break;
dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
+ if (vfd->ctrl_handler) {
+ ret = v4l2_s_ctrl(vfd->ctrl_handler, p);
+ break;
+ }
if (ops->vidioc_s_ctrl) {
ret = ops->vidioc_s_ctrl(file, fh, p);
break;
@@ -1332,10 +1343,12 @@ static long __video_do_ioctl(struct file *file,
struct v4l2_ext_controls *p = arg;
p->error_idx = p->count;
- if (!ops->vidioc_g_ext_ctrls)
- break;
- if (check_ext_ctrls(p, 0))
+ if (vfd->ctrl_handler)
+ ret = v4l2_g_ext_ctrls(vfd->ctrl_handler, p);
+ else if (ops->vidioc_g_ext_ctrls && check_ext_ctrls(p, 0))
ret = ops->vidioc_g_ext_ctrls(file, fh, p);
+ else
+ break;
v4l_print_ext_ctrls(cmd, vfd, p, !ret);
break;
}
@@ -1344,10 +1357,12 @@ static long __video_do_ioctl(struct file *file,
struct v4l2_ext_controls *p = arg;
p->error_idx = p->count;
- if (!ops->vidioc_s_ext_ctrls)
+ if (!vfd->ctrl_handler && !ops->vidioc_s_ext_ctrls)
break;
v4l_print_ext_ctrls(cmd, vfd, p, 1);
- if (check_ext_ctrls(p, 0))
+ if (vfd->ctrl_handler)
+ ret = v4l2_s_ext_ctrls(vfd->ctrl_handler, p);
+ else if (check_ext_ctrls(p, 0))
ret = ops->vidioc_s_ext_ctrls(file, fh, p);
break;
}
@@ -1356,10 +1371,12 @@ static long __video_do_ioctl(struct file *file,
struct v4l2_ext_controls *p = arg;
p->error_idx = p->count;
- if (!ops->vidioc_try_ext_ctrls)
+ if (!vfd->ctrl_handler && !ops->vidioc_try_ext_ctrls)
break;
v4l_print_ext_ctrls(cmd, vfd, p, 1);
- if (check_ext_ctrls(p, 0))
+ if (vfd->ctrl_handler)
+ ret = v4l2_try_ext_ctrls(vfd->ctrl_handler, p);
+ else if (check_ext_ctrls(p, 0))
ret = ops->vidioc_try_ext_ctrls(file, fh, p);
break;
}
@@ -1367,9 +1384,12 @@ static long __video_do_ioctl(struct file *file,
{
struct v4l2_querymenu *p = arg;
- if (!ops->vidioc_querymenu)
+ if (vfd->ctrl_handler)
+ ret = v4l2_querymenu(vfd->ctrl_handler, p);
+ else if (ops->vidioc_querymenu)
+ ret = ops->vidioc_querymenu(file, fh, p);
+ else
break;
- ret = ops->vidioc_querymenu(file, fh, p);
if (!ret)
dbgarg(cmd, "id=0x%x, index=%d, name=%s\n",
p->id, p->index, p->name);
--
GitLab
From e356054337fe42a1b98725c8e68d6599764888b9 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 24 May 2010 10:00:52 -0300
Subject: [PATCH 504/863] V4L/DVB: saa7115: convert to the new control
framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/saa7115.c | 183 +++++++++++++++-------------------
1 file changed, 83 insertions(+), 100 deletions(-)
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 76da74368680f..ee963f4d01bcf 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -45,6 +45,7 @@
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
#include <media/saa7115.h>
@@ -65,16 +66,19 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)");
struct saa711x_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+
+ struct {
+ /* chroma gain control cluster */
+ struct v4l2_ctrl *agc;
+ struct v4l2_ctrl *gain;
+ };
+
v4l2_std_id std;
int input;
int output;
int enable;
int radio;
- int bright;
- int contrast;
- int hue;
- int sat;
- int chroma_agc;
int width;
int height;
u32 ident;
@@ -90,6 +94,11 @@ static inline struct saa711x_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct saa711x_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd;
+}
+
/* ----------------------------------------------------------------------- */
static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value)
@@ -741,96 +750,53 @@ static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
return 0;
}
-static int saa711x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct saa711x_state *state = to_state(sd);
- u8 val;
switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- if (ctrl->value < 0 || ctrl->value > 255) {
- v4l2_err(sd, "invalid brightness setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->bright = ctrl->value;
- saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, state->bright);
- break;
-
- case V4L2_CID_CONTRAST:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l2_err(sd, "invalid contrast setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->contrast = ctrl->value;
- saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, state->contrast);
- break;
-
- case V4L2_CID_SATURATION:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l2_err(sd, "invalid saturation setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->sat = ctrl->value;
- saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, state->sat);
- break;
-
- case V4L2_CID_HUE:
- if (ctrl->value < -128 || ctrl->value > 127) {
- v4l2_err(sd, "invalid hue setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->hue = ctrl->value;
- saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, state->hue);
- break;
case V4L2_CID_CHROMA_AGC:
- val = saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL);
- state->chroma_agc = ctrl->value;
- if (ctrl->value)
- val &= 0x7f;
- else
- val |= 0x80;
- saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, val);
+ /* chroma gain cluster */
+ if (state->agc->cur.val)
+ state->gain->cur.val =
+ saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
break;
- case V4L2_CID_CHROMA_GAIN:
- /* Chroma gain cannot be set when AGC is enabled */
- if (state->chroma_agc == 1)
- return -EINVAL;
- saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, ctrl->value | 0x80);
- break;
- default:
- return -EINVAL;
}
-
return 0;
}
-static int saa711x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct saa711x_state *state = to_state(sd);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
- ctrl->value = state->bright;
+ saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val);
break;
+
case V4L2_CID_CONTRAST:
- ctrl->value = state->contrast;
+ saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val);
break;
+
case V4L2_CID_SATURATION:
- ctrl->value = state->sat;
+ saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val);
break;
+
case V4L2_CID_HUE:
- ctrl->value = state->hue;
+ saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val);
break;
+
case V4L2_CID_CHROMA_AGC:
- ctrl->value = state->chroma_agc;
- break;
- case V4L2_CID_CHROMA_GAIN:
- ctrl->value = saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
+ /* chroma gain cluster */
+ if (state->agc->val)
+ saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val);
+ else
+ saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80);
+ v4l2_ctrl_activate(state->gain, !state->agc->val);
break;
+
default:
return -EINVAL;
}
@@ -1223,25 +1189,6 @@ static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
return 0;
}
-static int saa711x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- switch (qc->id) {
- case V4L2_CID_BRIGHTNESS:
- return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
- case V4L2_CID_CONTRAST:
- case V4L2_CID_SATURATION:
- return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
- case V4L2_CID_CHROMA_AGC:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
- case V4L2_CID_CHROMA_GAIN:
- return v4l2_ctrl_query_fill(qc, 0, 127, 1, 48);
- default:
- return -EINVAL;
- }
-}
-
static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct saa711x_state *state = to_state(sd);
@@ -1518,17 +1465,27 @@ static int saa711x_log_status(struct v4l2_subdev *sd)
break;
}
v4l2_info(sd, "Width, Height: %d, %d\n", state->width, state->height);
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops saa711x_ctrl_ops = {
+ .s_ctrl = saa711x_s_ctrl,
+ .g_volatile_ctrl = saa711x_g_volatile_ctrl,
+};
+
static const struct v4l2_subdev_core_ops saa711x_core_ops = {
.log_status = saa711x_log_status,
.g_chip_ident = saa711x_g_chip_ident,
- .g_ctrl = saa711x_g_ctrl,
- .s_ctrl = saa711x_s_ctrl,
- .queryctrl = saa711x_queryctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
.s_std = saa711x_s_std,
.reset = saa711x_reset,
.s_gpio = saa711x_s_gpio,
@@ -1579,8 +1536,9 @@ static int saa711x_probe(struct i2c_client *client,
{
struct saa711x_state *state;
struct v4l2_subdev *sd;
- int i;
- char name[17];
+ struct v4l2_ctrl_handler *hdl;
+ int i;
+ char name[17];
char chip_id;
int autodetect = !id || id->driver_data == 1;
@@ -1619,15 +1577,38 @@ static int saa711x_probe(struct i2c_client *client,
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &saa711x_ops);
+
+ hdl = &state->hdl;
+ v4l2_ctrl_handler_init(hdl, 6);
+ /* add in ascending ID order */
+ v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_HUE, -128, 127, 1, 0);
+ state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_CHROMA_AGC, 0, 1, 1, 1);
+ state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+ V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40);
+ state->gain->is_volatile = 1;
+ sd->ctrl_handler = hdl;
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ kfree(state);
+ return err;
+ }
+ state->agc->flags |= V4L2_CTRL_FLAG_UPDATE;
+ v4l2_ctrl_cluster(2, &state->agc);
+
state->input = -1;
state->output = SAA7115_IPORT_ON;
state->enable = 1;
state->radio = 0;
- state->bright = 128;
- state->contrast = 64;
- state->hue = 0;
- state->sat = 64;
- state->chroma_agc = 1;
switch (chip_id) {
case '1':
state->ident = V4L2_IDENT_SAA7111;
@@ -1675,6 +1656,7 @@ static int saa711x_probe(struct i2c_client *client,
if (state->ident > V4L2_IDENT_SAA7111A)
saa711x_writeregs(sd, saa7115_init_misc);
saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
+ v4l2_ctrl_handler_setup(hdl);
v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n",
saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC),
@@ -1689,6 +1671,7 @@ static int saa711x_remove(struct i2c_client *client)
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
kfree(to_state(sd));
return 0;
}
--
GitLab
From ebc3bba5833e7021336f09767347a52448a60bc5 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 24 May 2010 10:01:58 -0300
Subject: [PATCH 505/863] V4L/DVB: msp3400: convert to the new control
framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/msp3400-driver.c | 248 +++++++++----------------
drivers/media/video/msp3400-driver.h | 18 +-
drivers/media/video/msp3400-kthreads.c | 16 +-
3 files changed, 110 insertions(+), 172 deletions(-)
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index e9df3cb02cc11..0e412131da7cc 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -283,51 +283,6 @@ void msp_set_scart(struct i2c_client *client, int in, int out)
msp_write_dem(client, 0x40, state->i2s_mode);
}
-void msp_set_audio(struct i2c_client *client)
-{
- struct msp_state *state = to_state(i2c_get_clientdata(client));
- int bal = 0, bass, treble, loudness;
- int val = 0;
- int reallymuted = state->muted | state->scan_in_progress;
-
- if (!reallymuted)
- val = (state->volume * 0x7f / 65535) << 8;
-
- v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n",
- state->muted ? "on" : "off",
- state->scan_in_progress ? "yes" : "no",
- state->volume);
-
- msp_write_dsp(client, 0x0000, val);
- msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1));
- if (state->has_scart2_out_volume)
- msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1));
- if (state->has_headphones)
- msp_write_dsp(client, 0x0006, val);
- if (!state->has_sound_processing)
- return;
-
- if (val)
- bal = (u8)((state->balance / 256) - 128);
- bass = ((state->bass - 32768) * 0x60 / 65535) << 8;
- treble = ((state->treble - 32768) * 0x60 / 65535) << 8;
- loudness = state->loudness ? ((5 * 4) << 8) : 0;
-
- v4l_dbg(1, msp_debug, client, "balance=%d bass=%d treble=%d loudness=%d\n",
- state->balance, state->bass, state->treble, state->loudness);
-
- msp_write_dsp(client, 0x0001, bal << 8);
- msp_write_dsp(client, 0x0002, bass);
- msp_write_dsp(client, 0x0003, treble);
- msp_write_dsp(client, 0x0004, loudness);
- if (!state->has_headphones)
- return;
- msp_write_dsp(client, 0x0030, bal << 8);
- msp_write_dsp(client, 0x0031, bass);
- msp_write_dsp(client, 0x0032, treble);
- msp_write_dsp(client, 0x0033, loudness);
-}
-
/* ------------------------------------------------------------------------ */
static void msp_wake_thread(struct i2c_client *client)
@@ -363,98 +318,73 @@ int msp_sleep(struct msp_state *state, int timeout)
/* ------------------------------------------------------------------------ */
-static int msp_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int msp_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct msp_state *state = to_state(sd);
+ struct msp_state *state = ctrl_to_state(ctrl);
+ struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
+ int val = ctrl->val;
switch (ctrl->id) {
- case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = state->volume;
- break;
-
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = state->muted;
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- if (!state->has_sound_processing)
- return -EINVAL;
- ctrl->value = state->balance;
- break;
-
- case V4L2_CID_AUDIO_BASS:
- if (!state->has_sound_processing)
- return -EINVAL;
- ctrl->value = state->bass;
+ case V4L2_CID_AUDIO_VOLUME: {
+ /* audio volume cluster */
+ int reallymuted = state->muted->val | state->scan_in_progress;
+
+ if (!reallymuted)
+ val = (val * 0x7f / 65535) << 8;
+
+ v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n",
+ state->muted->val ? "on" : "off",
+ state->scan_in_progress ? "yes" : "no",
+ state->volume->val);
+
+ msp_write_dsp(client, 0x0000, val);
+ msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1));
+ if (state->has_scart2_out_volume)
+ msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1));
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0006, val);
break;
-
- case V4L2_CID_AUDIO_TREBLE:
- if (!state->has_sound_processing)
- return -EINVAL;
- ctrl->value = state->treble;
- break;
-
- case V4L2_CID_AUDIO_LOUDNESS:
- if (!state->has_sound_processing)
- return -EINVAL;
- ctrl->value = state->loudness;
- break;
-
- default:
- return -EINVAL;
}
- return 0;
-}
-
-static int msp_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct msp_state *state = to_state(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_VOLUME:
- state->volume = ctrl->value;
- if (state->volume == 0)
- state->balance = 32768;
- break;
-
- case V4L2_CID_AUDIO_MUTE:
- if (ctrl->value < 0 || ctrl->value >= 2)
- return -ERANGE;
- state->muted = ctrl->value;
- break;
case V4L2_CID_AUDIO_BASS:
- if (!state->has_sound_processing)
- return -EINVAL;
- state->bass = ctrl->value;
+ val = ((val - 32768) * 0x60 / 65535) << 8;
+ msp_write_dsp(client, 0x0002, val);
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0031, val);
break;
case V4L2_CID_AUDIO_TREBLE:
- if (!state->has_sound_processing)
- return -EINVAL;
- state->treble = ctrl->value;
+ val = ((val - 32768) * 0x60 / 65535) << 8;
+ msp_write_dsp(client, 0x0003, val);
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0032, val);
break;
case V4L2_CID_AUDIO_LOUDNESS:
- if (!state->has_sound_processing)
- return -EINVAL;
- state->loudness = ctrl->value;
+ val = val ? ((5 * 4) << 8) : 0;
+ msp_write_dsp(client, 0x0004, val);
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0033, val);
break;
case V4L2_CID_AUDIO_BALANCE:
- if (!state->has_sound_processing)
- return -EINVAL;
- state->balance = ctrl->value;
+ val = (u8)((val / 256) - 128);
+ msp_write_dsp(client, 0x0001, val << 8);
+ if (state->has_headphones)
+ msp_write_dsp(client, 0x0030, val << 8);
break;
default:
return -EINVAL;
}
- msp_set_audio(client);
return 0;
}
+void msp_update_volume(struct msp_state *state)
+{
+ v4l2_ctrl_s_ctrl(state->volume, v4l2_ctrl_g_ctrl(state->volume));
+}
+
/* --- v4l2 ioctls --- */
static int msp_s_radio(struct v4l2_subdev *sd)
{
@@ -472,7 +402,7 @@ static int msp_s_radio(struct v4l2_subdev *sd)
msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
msp3400c_set_carrier(client, MSP_CARRIER(10.7),
MSP_CARRIER(10.7));
- msp_set_audio(client);
+ msp_update_volume(state);
break;
case OPMODE_AUTODETECT:
case OPMODE_AUTOSELECT:
@@ -592,33 +522,6 @@ static int msp_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq)
return 0;
}
-static int msp_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- struct msp_state *state = to_state(sd);
-
- switch (qc->id) {
- case V4L2_CID_AUDIO_VOLUME:
- return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880);
- case V4L2_CID_AUDIO_MUTE:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
- default:
- break;
- }
- if (!state->has_sound_processing)
- return -EINVAL;
- switch (qc->id) {
- case V4L2_CID_AUDIO_LOUDNESS:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
- default:
- return -EINVAL;
- }
- return 0;
-}
-
static int msp_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct msp_state *state = to_state(sd);
@@ -633,19 +536,14 @@ static int msp_log_status(struct v4l2_subdev *sd)
struct msp_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
const char *p;
+ char prefix[V4L2_SUBDEV_NAME_SIZE + 20];
if (state->opmode == OPMODE_AUTOSELECT)
msp_detect_stereo(client);
v4l_info(client, "%s rev1 = 0x%04x rev2 = 0x%04x\n",
client->name, state->rev1, state->rev2);
- v4l_info(client, "Audio: volume %d%s\n",
- state->volume, state->muted ? " (muted)" : "");
- if (state->has_sound_processing) {
- v4l_info(client, "Audio: balance %d bass %d treble %d loudness %s\n",
- state->balance, state->bass,
- state->treble,
- state->loudness ? "on" : "off");
- }
+ snprintf(prefix, sizeof(prefix), "%s: Audio: ", sd->name);
+ v4l2_ctrl_handler_log_status(&state->hdl, prefix);
switch (state->mode) {
case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break;
case MSP_MODE_FM_RADIO: p = "FM Radio"; break;
@@ -695,12 +593,20 @@ static int msp_resume(struct i2c_client *client)
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops msp_ctrl_ops = {
+ .s_ctrl = msp_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops msp_core_ops = {
.log_status = msp_log_status,
.g_chip_ident = msp_g_chip_ident,
- .g_ctrl = msp_g_ctrl,
- .s_ctrl = msp_s_ctrl,
- .queryctrl = msp_queryctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
.s_std = msp_s_std,
};
@@ -728,6 +634,7 @@ static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct msp_state *state;
struct v4l2_subdev *sd;
+ struct v4l2_ctrl_handler *hdl;
int (*thread_func)(void *data) = NULL;
int msp_hard;
int msp_family;
@@ -752,13 +659,7 @@ static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
state->v4l2_std = V4L2_STD_NTSC;
state->audmode = V4L2_TUNER_MODE_STEREO;
- state->volume = 58880; /* 0db gain */
- state->balance = 32768; /* 0db gain */
- state->bass = 32768;
- state->treble = 32768;
- state->loudness = 0;
state->input = -1;
- state->muted = 0;
state->i2s_mode = 0;
init_waitqueue_head(&state->wq);
/* These are the reset input/output positions */
@@ -777,8 +678,6 @@ static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
return -ENODEV;
}
- msp_set_audio(client);
-
msp_family = ((state->rev1 >> 4) & 0x0f) + 3;
msp_product = (state->rev2 >> 8) & 0xff;
msp_prod_hi = msp_product / 10;
@@ -849,6 +748,34 @@ static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
state->opmode = OPMODE_MANUAL;
}
+ hdl = &state->hdl;
+ v4l2_ctrl_handler_init(hdl, 6);
+ if (state->has_sound_processing) {
+ v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_BASS, 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_TREBLE, 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 0);
+ }
+ state->volume = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 58880);
+ v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+ state->muted = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ sd->ctrl_handler = hdl;
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ kfree(state);
+ return err;
+ }
+
+ v4l2_ctrl_cluster(2, &state->volume);
+ v4l2_ctrl_handler_setup(hdl);
+
/* hello world :-) */
v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n",
msp_family, msp_product,
@@ -903,6 +830,7 @@ static int msp_remove(struct i2c_client *client)
}
msp_reset(client);
+ v4l2_ctrl_handler_free(&state->hdl);
kfree(state);
return 0;
}
diff --git a/drivers/media/video/msp3400-driver.h b/drivers/media/video/msp3400-driver.h
index d6b3e6d0eef7f..32a478e532f35 100644
--- a/drivers/media/video/msp3400-driver.h
+++ b/drivers/media/video/msp3400-driver.h
@@ -6,6 +6,7 @@
#include <media/msp3400.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
/* ---------------------------------------------------------------------- */
@@ -51,6 +52,7 @@ extern int msp_stereo_thresh;
struct msp_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
int rev1, rev2;
int ident;
u8 has_nicam;
@@ -87,9 +89,12 @@ struct msp_state {
int audmode;
int rxsubchans;
- int volume, muted;
- int balance, loudness;
- int bass, treble;
+ struct {
+ /* volume cluster */
+ struct v4l2_ctrl *volume;
+ struct v4l2_ctrl *muted;
+ };
+
int scan_in_progress;
/* thread */
@@ -104,6 +109,11 @@ static inline struct msp_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct msp_state, sd);
}
+static inline struct msp_state *ctrl_to_state(struct v4l2_ctrl *ctrl)
+{
+ return container_of(ctrl->handler, struct msp_state, hdl);
+}
+
/* msp3400-driver.c */
int msp_write_dem(struct i2c_client *client, int addr, int val);
int msp_write_dsp(struct i2c_client *client, int addr, int val);
@@ -111,7 +121,7 @@ int msp_read_dem(struct i2c_client *client, int addr);
int msp_read_dsp(struct i2c_client *client, int addr);
int msp_reset(struct i2c_client *client);
void msp_set_scart(struct i2c_client *client, int in, int out);
-void msp_set_audio(struct i2c_client *client);
+void msp_update_volume(struct msp_state *state);
int msp_sleep(struct msp_state *state, int timeout);
/* msp3400-kthreads.c */
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index d5a69c5ee5e4f..b376fcdee6523 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -496,13 +496,13 @@ int msp3400c_thread(void *data)
v4l_dbg(1, msp_debug, client,
"thread: no carrier scan\n");
state->scan_in_progress = 0;
- msp_set_audio(client);
+ msp_update_volume(state);
continue;
}
/* mute audio */
state->scan_in_progress = 1;
- msp_set_audio(client);
+ msp_update_volume(state);
msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
val1 = val2 = 0;
@@ -634,7 +634,7 @@ int msp3400c_thread(void *data)
/* unmute */
state->scan_in_progress = 0;
msp3400c_set_audmode(client);
- msp_set_audio(client);
+ msp_update_volume(state);
if (msp_debug)
msp3400c_print_mode(client);
@@ -679,13 +679,13 @@ int msp3410d_thread(void *data)
v4l_dbg(1, msp_debug, client,
"thread: no carrier scan\n");
state->scan_in_progress = 0;
- msp_set_audio(client);
+ msp_update_volume(state);
continue;
}
/* mute audio */
state->scan_in_progress = 1;
- msp_set_audio(client);
+ msp_update_volume(state);
/* start autodetect. Note: autodetect is not supported for
NTSC-M and radio, hence we force the standard in those
@@ -797,7 +797,7 @@ int msp3410d_thread(void *data)
/* unmute */
msp3400c_set_audmode(client);
state->scan_in_progress = 0;
- msp_set_audio(client);
+ msp_update_volume(state);
/* monitor tv audio mode, the first time don't wait
so long to get a quick stereo/bilingual result */
@@ -974,7 +974,7 @@ int msp34xxg_thread(void *data)
v4l_dbg(1, msp_debug, client,
"thread: no carrier scan\n");
state->scan_in_progress = 0;
- msp_set_audio(client);
+ msp_update_volume(state);
continue;
}
@@ -1020,7 +1020,7 @@ int msp34xxg_thread(void *data)
}
/* unmute: dispatch sound to scart output, set scart volume */
- msp_set_audio(client);
+ msp_update_volume(state);
/* restore ACB */
if (msp_write_dsp(client, 0x13, state->acb))
--
GitLab
From 59b8311a9b4cdd3e11d1c7d434bb9abf1ae3bc5c Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 23 Apr 2010 09:04:48 -0300
Subject: [PATCH 506/863] V4L/DVB: saa717x: convert to the new control
framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/saa717x.c | 323 +++++++++-------------------------
1 file changed, 81 insertions(+), 242 deletions(-)
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index 78d69950c00ab..45f8bfc1342e3 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -38,6 +38,7 @@
#include <linux/videodev2.h>
#include <linux/i2c.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-i2c-drv.h>
MODULE_DESCRIPTION("Philips SAA717x audio/video decoder driver");
@@ -55,14 +56,11 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)");
struct saa717x_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
v4l2_std_id std;
int input;
int enable;
int radio;
- int bright;
- int contrast;
- int hue;
- int sat;
int playback;
int audio;
int tuner_audio_mode;
@@ -81,6 +79,11 @@ static inline struct saa717x_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct saa717x_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct saa717x_state, hdl)->sd;
+}
+
/* ----------------------------------------------------------------------- */
/* for audio mode */
@@ -774,29 +777,6 @@ static void set_audio_mode(struct v4l2_subdev *sd, int audio_mode)
saa717x_write(sd, 0x470, reg_set_audio_template[audio_mode][1]);
}
-/* write regs to video output level (bright,contrast,hue,sat) */
-static void set_video_output_level_regs(struct v4l2_subdev *sd,
- struct saa717x_state *decoder)
-{
- /* brightness ffh (bright) - 80h (ITU level) - 00h (dark) */
- saa717x_write(sd, 0x10a, decoder->bright);
-
- /* contrast 7fh (max: 1.984) - 44h (ITU) - 40h (1.0) -
- 0h (luminance off) 40: i2c dump
- c0h (-1.0 inverse chrominance)
- 80h (-2.0 inverse chrominance) */
- saa717x_write(sd, 0x10b, decoder->contrast);
-
- /* saturation? 7fh(max)-40h(ITU)-0h(color off)
- c0h (-1.0 inverse chrominance)
- 80h (-2.0 inverse chrominance) */
- saa717x_write(sd, 0x10c, decoder->sat);
-
- /* color hue (phase) control
- 7fh (+178.6) - 0h (0 normal) - 80h (-180.0) */
- saa717x_write(sd, 0x10d, decoder->hue);
-}
-
/* write regs to set audio volume, bass and treble */
static int set_audio_regs(struct v4l2_subdev *sd,
struct saa717x_state *decoder)
@@ -829,9 +809,9 @@ static int set_audio_regs(struct v4l2_subdev *sd,
saa717x_write(sd, 0x480, val);
- /* bass and treble; go to another function */
/* set bass and treble */
- val = decoder->audio_main_bass | (decoder->audio_main_treble << 8);
+ val = decoder->audio_main_bass & 0x1f;
+ val |= (decoder->audio_main_treble & 0x1f) << 5;
saa717x_write(sd, 0x488, val);
return 0;
}
@@ -893,218 +873,55 @@ static void set_v_scale(struct v4l2_subdev *sd, int task, int yscale)
saa717x_write(sd, 0x71 + task_shift, yscale >> 8);
}
-static int saa717x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct saa717x_state *state = to_state(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- if (ctrl->value < 0 || ctrl->value > 255) {
- v4l2_err(sd, "invalid brightness setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->bright = ctrl->value;
- v4l2_dbg(1, debug, sd, "bright:%d\n", state->bright);
- saa717x_write(sd, 0x10a, state->bright);
- break;
-
- case V4L2_CID_CONTRAST:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l2_err(sd, "invalid contrast setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->contrast = ctrl->value;
- v4l2_dbg(1, debug, sd, "contrast:%d\n", state->contrast);
- saa717x_write(sd, 0x10b, state->contrast);
- break;
-
- case V4L2_CID_SATURATION:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l2_err(sd, "invalid saturation setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->sat = ctrl->value;
- v4l2_dbg(1, debug, sd, "sat:%d\n", state->sat);
- saa717x_write(sd, 0x10c, state->sat);
- break;
-
- case V4L2_CID_HUE:
- if (ctrl->value < -128 || ctrl->value > 127) {
- v4l2_err(sd, "invalid hue setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- state->hue = ctrl->value;
- v4l2_dbg(1, debug, sd, "hue:%d\n", state->hue);
- saa717x_write(sd, 0x10d, state->hue);
- break;
-
- case V4L2_CID_AUDIO_MUTE:
- state->audio_main_mute = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- case V4L2_CID_AUDIO_VOLUME:
- state->audio_main_volume = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- state->audio_main_balance = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- case V4L2_CID_AUDIO_TREBLE:
- state->audio_main_treble = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- case V4L2_CID_AUDIO_BASS:
- state->audio_main_bass = ctrl->value;
- set_audio_regs(sd, state);
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int saa717x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int saa717x_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct saa717x_state *state = to_state(sd);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
- ctrl->value = state->bright;
- break;
+ saa717x_write(sd, 0x10a, ctrl->val);
+ return 0;
case V4L2_CID_CONTRAST:
- ctrl->value = state->contrast;
- break;
+ saa717x_write(sd, 0x10b, ctrl->val);
+ return 0;
case V4L2_CID_SATURATION:
- ctrl->value = state->sat;
- break;
+ saa717x_write(sd, 0x10c, ctrl->val);
+ return 0;
case V4L2_CID_HUE:
- ctrl->value = state->hue;
- break;
+ saa717x_write(sd, 0x10d, ctrl->val);
+ return 0;
case V4L2_CID_AUDIO_MUTE:
- ctrl->value = state->audio_main_mute;
+ state->audio_main_mute = ctrl->val;
break;
case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = state->audio_main_volume;
+ state->audio_main_volume = ctrl->val;
break;
case V4L2_CID_AUDIO_BALANCE:
- ctrl->value = state->audio_main_balance;
+ state->audio_main_balance = ctrl->val;
break;
case V4L2_CID_AUDIO_TREBLE:
- ctrl->value = state->audio_main_treble;
+ state->audio_main_treble = ctrl->val;
break;
case V4L2_CID_AUDIO_BASS:
- ctrl->value = state->audio_main_bass;
+ state->audio_main_bass = ctrl->val;
break;
default:
- return -EINVAL;
+ return 0;
}
-
+ set_audio_regs(sd, state);
return 0;
}
-static struct v4l2_queryctrl saa717x_qctrl[] = {
- {
- .id = V4L2_CID_BRIGHTNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Brightness",
- .minimum = 0,
- .maximum = 255,
- .step = 1,
- .default_value = 128,
- .flags = 0,
- }, {
- .id = V4L2_CID_CONTRAST,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Contrast",
- .minimum = 0,
- .maximum = 255,
- .step = 1,
- .default_value = 64,
- .flags = 0,
- }, {
- .id = V4L2_CID_SATURATION,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Saturation",
- .minimum = 0,
- .maximum = 255,
- .step = 1,
- .default_value = 64,
- .flags = 0,
- }, {
- .id = V4L2_CID_HUE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Hue",
- .minimum = -128,
- .maximum = 127,
- .step = 1,
- .default_value = 0,
- .flags = 0,
- }, {
- .id = V4L2_CID_AUDIO_VOLUME,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Volume",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535 / 100,
- .default_value = 58880,
- .flags = 0,
- }, {
- .id = V4L2_CID_AUDIO_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Balance",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535 / 100,
- .default_value = 32768,
- .flags = 0,
- }, {
- .id = V4L2_CID_AUDIO_MUTE,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- .flags = 0,
- }, {
- .id = V4L2_CID_AUDIO_BASS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Bass",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535 / 100,
- .default_value = 32768,
- }, {
- .id = V4L2_CID_AUDIO_TREBLE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Treble",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535 / 100,
- .default_value = 32768,
- },
-};
-
static int saa717x_s_video_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
@@ -1158,18 +975,6 @@ static int saa717x_s_video_routing(struct v4l2_subdev *sd,
return 0;
}
-static int saa717x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(saa717x_qctrl); i++)
- if (qc->id && qc->id == saa717x_qctrl[i].id) {
- memcpy(qc, &saa717x_qctrl[i], sizeof(*qc));
- return 0;
- }
- return -EINVAL;
-}
-
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int saa717x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
{
@@ -1386,17 +1191,34 @@ static int saa717x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
return 0;
}
+static int saa717x_log_status(struct v4l2_subdev *sd)
+{
+ struct saa717x_state *state = to_state(sd);
+
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
+ return 0;
+}
+
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops saa717x_ctrl_ops = {
+ .s_ctrl = saa717x_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops saa717x_core_ops = {
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = saa717x_g_register,
.s_register = saa717x_s_register,
#endif
- .queryctrl = saa717x_queryctrl,
- .g_ctrl = saa717x_g_ctrl,
- .s_ctrl = saa717x_s_ctrl,
.s_std = saa717x_s_std,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
+ .log_status = saa717x_log_status,
};
static const struct v4l2_subdev_tuner_ops saa717x_tuner_ops = {
@@ -1432,6 +1254,7 @@ static int saa717x_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
struct saa717x_state *decoder;
+ struct v4l2_ctrl_handler *hdl;
struct v4l2_subdev *sd;
u8 id = 0;
char *p = "";
@@ -1467,16 +1290,41 @@ static int saa717x_probe(struct i2c_client *client,
p = "saa7171";
v4l2_info(sd, "%s found @ 0x%x (%s)\n", p,
client->addr << 1, client->adapter->name);
+
+ hdl = &decoder->hdl;
+ v4l2_ctrl_handler_init(hdl, 9);
+ /* add in ascending ID order */
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1, 68);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 255, 1, 64);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_HUE, -128, 127, 1, 0);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 42000);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_BASS, -16, 15, 1, 0);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_TREBLE, -16, 15, 1, 0);
+ v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ sd->ctrl_handler = hdl;
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ kfree(decoder);
+ return err;
+ }
+
decoder->std = V4L2_STD_NTSC;
decoder->input = -1;
decoder->enable = 1;
- /* tune these parameters */
- decoder->bright = 0x80;
- decoder->contrast = 0x44;
- decoder->sat = 0x40;
- decoder->hue = 0x00;
-
/* FIXME!! */
decoder->playback = 0; /* initially capture mode used */
decoder->audio = 1; /* DECODER_AUDIO_48_KHZ */
@@ -1487,23 +1335,13 @@ static int saa717x_probe(struct i2c_client *client,
/* set volume, bass and treble */
decoder->audio_main_vol_l = 6;
decoder->audio_main_vol_r = 6;
- decoder->audio_main_bass = 0;
- decoder->audio_main_treble = 0;
- decoder->audio_main_mute = 0;
- decoder->audio_main_balance = 32768;
- /* normalize (24 to -40 (not -84) -> 65535 to 0) */
- decoder->audio_main_volume =
- (decoder->audio_main_vol_r + 41) * 65535 / (24 - (-40));
v4l2_dbg(1, debug, sd, "writing init values\n");
/* FIXME!! */
saa717x_write_regs(sd, reg_init_initialize);
- set_video_output_level_regs(sd, decoder);
- /* set bass,treble to 0db 20041101 K.Ohta */
- decoder->audio_main_bass = 0;
- decoder->audio_main_treble = 0;
- set_audio_regs(sd, decoder);
+
+ v4l2_ctrl_handler_setup(hdl);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(2*HZ);
@@ -1515,6 +1353,7 @@ static int saa717x_remove(struct i2c_client *client)
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
kfree(to_state(sd));
return 0;
}
--
GitLab
From 72c851b00f6c86353c54fdd9f1ef88d82e8df6c5 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 6 Aug 2010 10:53:19 -0300
Subject: [PATCH 507/863] V4L/DVB: cx25840/ivtv: replace ugly priv control with
s_config
The cx25840 used a private control CX25840_CID_ENABLE_PVR150_WORKAROUND
to be told whether to enable a workaround for certain pvr150 cards.
This is really config data that it needs to get at load time.
Implemented this in cx25840 and ivtv.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx25840/cx25840-core.c | 23 ++++++++++++++--------
drivers/media/video/cx25840/cx25840-core.h | 8 --------
drivers/media/video/ivtv/ivtv-driver.c | 9 +--------
drivers/media/video/ivtv/ivtv-i2c.c | 7 +++++++
include/media/cx25840.h | 12 +++++++++++
5 files changed, 35 insertions(+), 24 deletions(-)
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 9fab0b1708465..69763729ccc66 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1127,11 +1127,6 @@ static int cx25840_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
- case CX25840_CID_ENABLE_PVR150_WORKAROUND:
- state->pvr150_workaround = ctrl->value;
- set_input(client, state->vid_input, state->aud_input);
- break;
-
case V4L2_CID_BRIGHTNESS:
if (ctrl->value < 0 || ctrl->value > 255) {
v4l_err(client, "invalid brightness setting %d\n",
@@ -1194,9 +1189,6 @@ static int cx25840_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
- case CX25840_CID_ENABLE_PVR150_WORKAROUND:
- ctrl->value = state->pvr150_workaround;
- break;
case V4L2_CID_BRIGHTNESS:
ctrl->value = (s8)cx25840_read(client, 0x414) + 128;
break;
@@ -1792,6 +1784,20 @@ static int cx25840_log_status(struct v4l2_subdev *sd)
return 0;
}
+static int cx25840_s_config(struct v4l2_subdev *sd, int irq, void *platform_data)
+{
+ struct cx25840_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (platform_data) {
+ struct cx25840_platform_data *pdata = platform_data;
+
+ state->pvr150_workaround = pdata->pvr150_workaround;
+ set_input(client, state->vid_input, state->aud_input);
+ }
+ return 0;
+}
+
static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status,
bool *handled)
{
@@ -1879,6 +1885,7 @@ static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status,
static const struct v4l2_subdev_core_ops cx25840_core_ops = {
.log_status = cx25840_log_status,
+ .s_config = cx25840_s_config,
.g_chip_ident = cx25840_g_chip_ident,
.g_ctrl = cx25840_g_ctrl,
.s_ctrl = cx25840_s_ctrl,
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
index 8f47322c003dc..8ac57a13a4555 100644
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ b/drivers/media/video/cx25840/cx25840-core.h
@@ -26,14 +26,6 @@
#include <media/v4l2-chip-ident.h>
#include <linux/i2c.h>
-/* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
- present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
- certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
- audio autodetect fails on some channels for these models and the workaround
- is to select the audio standard explicitly. Many thanks to Hauppauge for
- providing this information. */
-#define CX25840_CID_ENABLE_PVR150_WORKAROUND (V4L2_CID_PRIVATE_BASE+0)
-
struct cx25840_ir_state;
struct cx25840_state {
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 07c5c18a25cbc..f72e9d1cee09c 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1269,15 +1269,8 @@ int ivtv_init_on_first_open(struct ivtv *itv)
IVTV_DEBUG_INFO("Getting firmware version..\n");
ivtv_firmware_versions(itv);
- if (itv->card->hw_all & IVTV_HW_CX25840) {
- struct v4l2_control ctrl;
-
+ if (itv->card->hw_all & IVTV_HW_CX25840)
v4l2_subdev_call(itv->sd_video, core, load_fw);
- /* CX25840_CID_ENABLE_PVR150_WORKAROUND */
- ctrl.id = V4L2_CID_PRIVATE_BASE;
- ctrl.value = itv->pvr150_workaround;
- v4l2_subdev_call(itv->sd_video, core, s_ctrl, &ctrl);
- }
vf.tuner = 0;
vf.type = V4L2_TUNER_ANALOG_TV;
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index a5b92d109c6c1..d391bbdb0b8a6 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -63,6 +63,7 @@
#include "ivtv-cards.h"
#include "ivtv-gpio.h"
#include "ivtv-i2c.h"
+#include <media/cx25840.h>
/* i2c implementation for cx23415/6 chip, ivtv project.
* Author: Kevin Thayer (nufan_wfk at yahoo.com)
@@ -292,6 +293,12 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
adap, mod, type, 0, I2C_ADDRS(hw_addrs[idx]));
+ } else if (hw == IVTV_HW_CX25840) {
+ struct cx25840_platform_data pdata;
+
+ pdata.pvr150_workaround = itv->pvr150_workaround;
+ sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev,
+ adap, mod, type, 0, &pdata, hw_addrs[idx], NULL);
} else {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
adap, mod, type, hw_addrs[idx], NULL);
diff --git a/include/media/cx25840.h b/include/media/cx25840.h
index 1bba39e3d406a..46d1a141208ef 100644
--- a/include/media/cx25840.h
+++ b/include/media/cx25840.h
@@ -172,4 +172,16 @@ enum cx23885_io_pad {
CX23885_PAD_IRQ_N,
CX23885_PAD_GPIO16,
};
+
+/* pvr150_workaround activates a workaround for a hardware bug that is
+ present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
+ certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
+ audio autodetect fails on some channels for these models and the workaround
+ is to select the audio standard explicitly. Many thanks to Hauppauge for
+ providing this information.
+ This platform data only needs to be supplied by the ivtv driver. */
+struct cx25840_platform_data {
+ int pvr150_workaround;
+};
+
#endif
--
GitLab
From e34e658b5a42fb1a12fda2112f0b556cf5d1f1c4 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 6 Aug 2010 10:55:39 -0300
Subject: [PATCH 508/863] V4L/DVB: cx25840: convert to the new control
framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx25840/cx25840-audio.c | 144 ++--------------
drivers/media/video/cx25840/cx25840-core.c | 178 +++++++-------------
drivers/media/video/cx25840/cx25840-core.h | 18 +-
3 files changed, 94 insertions(+), 246 deletions(-)
diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c
index 45608d50529c9..6faad34df3ac3 100644
--- a/drivers/media/video/cx25840/cx25840-audio.c
+++ b/drivers/media/video/cx25840/cx25840-audio.c
@@ -474,33 +474,10 @@ void cx25840_audio_set_path(struct i2c_client *client)
cx25840_and_or(client, 0x803, ~0x10, 0x10);
}
-static int get_volume(struct i2c_client *client)
-{
- struct cx25840_state *state = to_state(i2c_get_clientdata(client));
- int vol;
-
- if (state->unmute_volume >= 0)
- return state->unmute_volume;
-
- /* Volume runs +18dB to -96dB in 1/2dB steps
- * change to fit the msp3400 -114dB to +12dB range */
-
- /* check PATH1_VOLUME */
- vol = 228 - cx25840_read(client, 0x8d4);
- vol = (vol / 2) + 23;
- return vol << 9;
-}
-
static void set_volume(struct i2c_client *client, int volume)
{
- struct cx25840_state *state = to_state(i2c_get_clientdata(client));
int vol;
- if (state->unmute_volume >= 0) {
- state->unmute_volume = volume;
- return;
- }
-
/* Convert the volume to msp3400 values (0-127) */
vol = volume >> 9;
@@ -517,52 +494,6 @@ static void set_volume(struct i2c_client *client, int volume)
cx25840_write(client, 0x8d4, 228 - (vol * 2));
}
-static int get_bass(struct i2c_client *client)
-{
- /* bass is 49 steps +12dB to -12dB */
-
- /* check PATH1_EQ_BASS_VOL */
- int bass = cx25840_read(client, 0x8d9) & 0x3f;
- bass = (((48 - bass) * 0xffff) + 47) / 48;
- return bass;
-}
-
-static void set_bass(struct i2c_client *client, int bass)
-{
- /* PATH1_EQ_BASS_VOL */
- cx25840_and_or(client, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff));
-}
-
-static int get_treble(struct i2c_client *client)
-{
- /* treble is 49 steps +12dB to -12dB */
-
- /* check PATH1_EQ_TREBLE_VOL */
- int treble = cx25840_read(client, 0x8db) & 0x3f;
- treble = (((48 - treble) * 0xffff) + 47) / 48;
- return treble;
-}
-
-static void set_treble(struct i2c_client *client, int treble)
-{
- /* PATH1_EQ_TREBLE_VOL */
- cx25840_and_or(client, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff));
-}
-
-static int get_balance(struct i2c_client *client)
-{
- /* balance is 7 bit, 0 to -96dB */
-
- /* check PATH1_BAL_LEVEL */
- int balance = cx25840_read(client, 0x8d5) & 0x7f;
- /* check PATH1_BAL_LEFT */
- if ((cx25840_read(client, 0x8d5) & 0x80) == 0)
- balance = 0x80 - balance;
- else
- balance = 0x80 + balance;
- return balance << 8;
-}
-
static void set_balance(struct i2c_client *client, int balance)
{
int bal = balance >> 8;
@@ -579,31 +510,6 @@ static void set_balance(struct i2c_client *client, int balance)
}
}
-static int get_mute(struct i2c_client *client)
-{
- struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
- return state->unmute_volume >= 0;
-}
-
-static void set_mute(struct i2c_client *client, int mute)
-{
- struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
- if (mute && state->unmute_volume == -1) {
- int vol = get_volume(client);
-
- set_volume(client, 0);
- state->unmute_volume = vol;
- }
- else if (!mute && state->unmute_volume != -1) {
- int vol = state->unmute_volume;
-
- state->unmute_volume = -1;
- set_volume(client, vol);
- }
-}
-
int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -624,25 +530,31 @@ int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
return retval;
}
-int cx25840_audio_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cx25840_audio_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
+ struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = get_volume(client);
+ if (state->mute->val)
+ set_volume(client, 0);
+ else
+ set_volume(client, state->volume->val);
break;
case V4L2_CID_AUDIO_BASS:
- ctrl->value = get_bass(client);
+ /* PATH1_EQ_BASS_VOL */
+ cx25840_and_or(client, 0x8d9, ~0x3f,
+ 48 - (ctrl->val * 48 / 0xffff));
break;
case V4L2_CID_AUDIO_TREBLE:
- ctrl->value = get_treble(client);
+ /* PATH1_EQ_TREBLE_VOL */
+ cx25840_and_or(client, 0x8db, ~0x3f,
+ 48 - (ctrl->val * 48 / 0xffff));
break;
case V4L2_CID_AUDIO_BALANCE:
- ctrl->value = get_balance(client);
- break;
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = get_mute(client);
+ set_balance(client, ctrl->val);
break;
default:
return -EINVAL;
@@ -650,28 +562,6 @@ int cx25840_audio_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
return 0;
}
-int cx25840_audio_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_VOLUME:
- set_volume(client, ctrl->value);
- break;
- case V4L2_CID_AUDIO_BASS:
- set_bass(client, ctrl->value);
- break;
- case V4L2_CID_AUDIO_TREBLE:
- set_treble(client, ctrl->value);
- break;
- case V4L2_CID_AUDIO_BALANCE:
- set_balance(client, ctrl->value);
- break;
- case V4L2_CID_AUDIO_MUTE:
- set_mute(client, ctrl->value);
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
+const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops = {
+ .s_ctrl = cx25840_audio_s_ctrl,
+};
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 69763729ccc66..86ca8c2359dd8 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1121,94 +1121,29 @@ static int set_v4lstd(struct i2c_client *client)
/* ----------------------------------------------------------------------- */
-static int cx25840_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct cx25840_state *state = to_state(sd);
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
- if (ctrl->value < 0 || ctrl->value > 255) {
- v4l_err(client, "invalid brightness setting %d\n",
- ctrl->value);
- return -ERANGE;
- }
-
- cx25840_write(client, 0x414, ctrl->value - 128);
+ cx25840_write(client, 0x414, ctrl->val - 128);
break;
case V4L2_CID_CONTRAST:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l_err(client, "invalid contrast setting %d\n",
- ctrl->value);
- return -ERANGE;
- }
-
- cx25840_write(client, 0x415, ctrl->value << 1);
+ cx25840_write(client, 0x415, ctrl->val << 1);
break;
case V4L2_CID_SATURATION:
- if (ctrl->value < 0 || ctrl->value > 127) {
- v4l_err(client, "invalid saturation setting %d\n",
- ctrl->value);
- return -ERANGE;
- }
-
- cx25840_write(client, 0x420, ctrl->value << 1);
- cx25840_write(client, 0x421, ctrl->value << 1);
+ cx25840_write(client, 0x420, ctrl->val << 1);
+ cx25840_write(client, 0x421, ctrl->val << 1);
break;
case V4L2_CID_HUE:
- if (ctrl->value < -128 || ctrl->value > 127) {
- v4l_err(client, "invalid hue setting %d\n", ctrl->value);
- return -ERANGE;
- }
-
- cx25840_write(client, 0x422, ctrl->value);
+ cx25840_write(client, 0x422, ctrl->val);
break;
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_MUTE:
- if (is_cx2583x(state))
- return -EINVAL;
- return cx25840_audio_s_ctrl(sd, ctrl);
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int cx25840_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct cx25840_state *state = to_state(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- ctrl->value = (s8)cx25840_read(client, 0x414) + 128;
- break;
- case V4L2_CID_CONTRAST:
- ctrl->value = cx25840_read(client, 0x415) >> 1;
- break;
- case V4L2_CID_SATURATION:
- ctrl->value = cx25840_read(client, 0x420) >> 1;
- break;
- case V4L2_CID_HUE:
- ctrl->value = (s8)cx25840_read(client, 0x422);
- break;
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_MUTE:
- if (is_cx2583x(state))
- return -EINVAL;
- return cx25840_audio_g_ctrl(sd, ctrl);
default:
return -EINVAL;
}
@@ -1367,8 +1302,6 @@ static void log_audio_status(struct i2c_client *client)
default: p = "not defined";
}
v4l_info(client, "Detected audio standard: %s\n", p);
- v4l_info(client, "Audio muted: %s\n",
- (state->unmute_volume >= 0) ? "yes" : "no");
v4l_info(client, "Audio microcontroller: %s\n",
(download_ctl & 0x10) ?
((mute_ctl & 0x2) ? "detecting" : "running") : "stopped");
@@ -1585,40 +1518,6 @@ static int cx25840_s_stream(struct v4l2_subdev *sd, int enable)
return 0;
}
-static int cx25840_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- struct cx25840_state *state = to_state(sd);
-
- switch (qc->id) {
- case V4L2_CID_BRIGHTNESS:
- return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
- case V4L2_CID_CONTRAST:
- case V4L2_CID_SATURATION:
- return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
- default:
- break;
- }
- if (is_cx2583x(state))
- return -EINVAL;
-
- switch (qc->id) {
- case V4L2_CID_AUDIO_VOLUME:
- return v4l2_ctrl_query_fill(qc, 0, 65535,
- 65535 / 100, state->default_volume);
- case V4L2_CID_AUDIO_MUTE:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
- default:
- return -EINVAL;
- }
- return -EINVAL;
-}
-
static int cx25840_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct cx25840_state *state = to_state(sd);
@@ -1781,6 +1680,7 @@ static int cx25840_log_status(struct v4l2_subdev *sd)
if (!is_cx2583x(state))
log_audio_status(client);
cx25840_ir_log_status(sd);
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
@@ -1883,13 +1783,21 @@ static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status,
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops cx25840_ctrl_ops = {
+ .s_ctrl = cx25840_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops cx25840_core_ops = {
.log_status = cx25840_log_status,
.s_config = cx25840_s_config,
.g_chip_ident = cx25840_g_chip_ident,
- .g_ctrl = cx25840_g_ctrl,
- .s_ctrl = cx25840_s_ctrl,
- .queryctrl = cx25840_queryctrl,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
.s_std = cx25840_s_std,
.reset = cx25840_reset,
.load_fw = cx25840_load_fw,
@@ -1981,6 +1889,7 @@ static int cx25840_probe(struct i2c_client *client,
{
struct cx25840_state *state;
struct v4l2_subdev *sd;
+ int default_volume;
u32 id = V4L2_IDENT_NONE;
u16 device_id;
@@ -2024,6 +1933,7 @@ static int cx25840_probe(struct i2c_client *client,
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &cx25840_ops);
+
switch (id) {
case V4L2_IDENT_CX23885_AV:
v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n",
@@ -2068,12 +1978,48 @@ static int cx25840_probe(struct i2c_client *client,
state->audclk_freq = 48000;
state->pvr150_workaround = 0;
state->audmode = V4L2_TUNER_MODE_LANG1;
- state->unmute_volume = -1;
- state->default_volume = 228 - cx25840_read(client, 0x8d4);
- state->default_volume = ((state->default_volume / 2) + 23) << 9;
state->vbi_line_offset = 8;
state->id = id;
state->rev = device_id;
+ v4l2_ctrl_handler_init(&state->hdl, 9);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
+ V4L2_CID_HUE, -128, 127, 1, 0);
+ if (!is_cx2583x(state)) {
+ default_volume = 228 - cx25840_read(client, 0x8d4);
+ default_volume = ((default_volume / 2) + 23) << 9;
+
+ state->volume = v4l2_ctrl_new_std(&state->hdl,
+ &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
+ 0, 65335, 65535 / 100, default_volume);
+ state->mute = v4l2_ctrl_new_std(&state->hdl,
+ &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
+ 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+ V4L2_CID_AUDIO_BALANCE,
+ 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+ V4L2_CID_AUDIO_BASS,
+ 0, 65535, 65535 / 100, 32768);
+ v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
+ V4L2_CID_AUDIO_TREBLE,
+ 0, 65535, 65535 / 100, 32768);
+ }
+ sd->ctrl_handler = &state->hdl;
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
+ return err;
+ }
+ v4l2_ctrl_cluster(2, &state->volume);
+ v4l2_ctrl_handler_setup(&state->hdl);
cx25840_ir_probe(sd);
return 0;
@@ -2082,10 +2028,12 @@ static int cx25840_probe(struct i2c_client *client,
static int cx25840_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct cx25840_state *state = to_state(sd);
cx25840_ir_remove(sd);
v4l2_device_unregister_subdev(sd);
- kfree(to_state(sd));
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
return 0;
}
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
index 8ac57a13a4555..bd4ada28b490a 100644
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ b/drivers/media/video/cx25840/cx25840-core.h
@@ -24,6 +24,7 @@
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#include <linux/i2c.h>
struct cx25840_ir_state;
@@ -31,6 +32,12 @@ struct cx25840_ir_state;
struct cx25840_state {
struct i2c_client *c;
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* volume cluster */
+ struct v4l2_ctrl *volume;
+ struct v4l2_ctrl *mute;
+ };
int pvr150_workaround;
int radio;
v4l2_std_id std;
@@ -38,8 +45,6 @@ struct cx25840_state {
enum cx25840_audio_input aud_input;
u32 audclk_freq;
int audmode;
- int unmute_volume; /* -1 if not muted */
- int default_volume;
int vbi_line_offset;
u32 id;
u32 rev;
@@ -54,6 +59,11 @@ static inline struct cx25840_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct cx25840_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct cx25840_state, hdl)->sd;
+}
+
static inline bool is_cx2583x(struct cx25840_state *state)
{
return state->id == V4L2_IDENT_CX25836 ||
@@ -106,8 +116,8 @@ int cx25840_loadfw(struct i2c_client *client);
/* cx25850-audio.c */
void cx25840_audio_set_path(struct i2c_client *client);
int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
-int cx25840_audio_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
-int cx25840_audio_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+
+extern const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops;
/* ----------------------------------------------------------------------- */
/* cx25850-vbi.c */
--
GitLab
From f6e114eed0414fbba9eb73480cd8efdaba96aaa7 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 24 May 2010 10:16:43 -0300
Subject: [PATCH 509/863] V4L/DVB: cx2341x: convert to the control framework
Since this module is also used by drivers that are not yet converted, the old
and new code have to co-exist.
The source is split into three parts: a common part at the top, which is used
by both old and new code, then the old code followed by the new control
framework implementation. This new code is much more readable (and shorter!)
than the original code.
Once all bridge drivers that use this are converted the old code can be
deleted.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cx2341x.c | 747 +++++++++++++++++++++++++++++-----
include/media/cx2341x.h | 97 +++++
2 files changed, 732 insertions(+), 112 deletions(-)
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index 2bf44ef10fec2..e5c3c8da4be36 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -38,6 +38,145 @@ static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
+/********************** COMMON CODE *********************/
+
+/* definitions for audio properties bits 29-28 */
+#define CX2341X_AUDIO_ENCODING_METHOD_MPEG 0
+#define CX2341X_AUDIO_ENCODING_METHOD_AC3 1
+#define CX2341X_AUDIO_ENCODING_METHOD_LPCM 2
+
+static const char *cx2341x_get_name(u32 id)
+{
+ switch (id) {
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+ return "Spatial Filter Mode";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+ return "Spatial Filter";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+ return "Spatial Luma Filter Type";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+ return "Spatial Chroma Filter Type";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+ return "Temporal Filter Mode";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
+ return "Temporal Filter";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+ return "Median Filter Type";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+ return "Median Luma Filter Maximum";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
+ return "Median Luma Filter Minimum";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
+ return "Median Chroma Filter Maximum";
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
+ return "Median Chroma Filter Minimum";
+ case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+ return "Insert Navigation Packets";
+ }
+ return NULL;
+}
+
+static const char **cx2341x_get_menu(u32 id)
+{
+ static const char *cx2341x_video_spatial_filter_mode_menu[] = {
+ "Manual",
+ "Auto",
+ NULL
+ };
+
+ static const char *cx2341x_video_luma_spatial_filter_type_menu[] = {
+ "Off",
+ "1D Horizontal",
+ "1D Vertical",
+ "2D H/V Separable",
+ "2D Symmetric non-separable",
+ NULL
+ };
+
+ static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = {
+ "Off",
+ "1D Horizontal",
+ NULL
+ };
+
+ static const char *cx2341x_video_temporal_filter_mode_menu[] = {
+ "Manual",
+ "Auto",
+ NULL
+ };
+
+ static const char *cx2341x_video_median_filter_type_menu[] = {
+ "Off",
+ "Horizontal",
+ "Vertical",
+ "Horizontal/Vertical",
+ "Diagonal",
+ NULL
+ };
+
+ switch (id) {
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+ return cx2341x_video_spatial_filter_mode_menu;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+ return cx2341x_video_luma_spatial_filter_type_menu;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+ return cx2341x_video_chroma_spatial_filter_type_menu;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+ return cx2341x_video_temporal_filter_mode_menu;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+ return cx2341x_video_median_filter_type_menu;
+ }
+ return NULL;
+}
+
+static void cx2341x_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+ s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags)
+{
+ *name = cx2341x_get_name(id);
+ *flags = 0;
+
+ switch (id) {
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+ *type = V4L2_CTRL_TYPE_MENU;
+ *min = 0;
+ *step = 0;
+ break;
+ case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+ *type = V4L2_CTRL_TYPE_BOOLEAN;
+ *min = 0;
+ *max = *step = 1;
+ break;
+ default:
+ *type = V4L2_CTRL_TYPE_INTEGER;
+ break;
+ }
+ switch (id) {
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
+ *flags |= V4L2_CTRL_FLAG_UPDATE;
+ break;
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
+ case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
+ *flags |= V4L2_CTRL_FLAG_SLIDER;
+ break;
+ case V4L2_CID_MPEG_VIDEO_ENCODING:
+ *flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ break;
+ }
+}
+
+
+/********************** OLD CODE *********************/
+
/* Must be sorted from low to high control ID! */
const u32 cx2341x_mpeg_ctrls[] = {
V4L2_CID_MPEG_CLASS,
@@ -134,8 +273,6 @@ static const struct cx2341x_mpeg_params default_params = {
.video_chroma_median_filter_top = 255,
.video_chroma_median_filter_bottom = 0,
};
-
-
/* Map the control ID to the correct field in the cx2341x_mpeg_params
struct. Return -EINVAL if the ID is unknown, else return 0. */
static int cx2341x_get_ctrl(const struct cx2341x_mpeg_params *params,
@@ -415,83 +552,33 @@ static int cx2341x_ctrl_query_fill(struct v4l2_queryctrl *qctrl,
{
const char *name;
- qctrl->flags = 0;
switch (qctrl->id) {
/* MPEG controls */
case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
- name = "Spatial Filter Mode";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
- name = "Spatial Filter";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
- name = "Spatial Luma Filter Type";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
- name = "Spatial Chroma Filter Type";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
- name = "Temporal Filter Mode";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
- name = "Temporal Filter";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
- name = "Median Filter Type";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
- name = "Median Luma Filter Maximum";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
- name = "Median Luma Filter Minimum";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
- name = "Median Chroma Filter Maximum";
- break;
case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
- name = "Median Chroma Filter Minimum";
- break;
case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
- name = "Insert Navigation Packets";
- break;
+ cx2341x_ctrl_fill(qctrl->id, &name, &qctrl->type,
+ &min, &max, &step, &def, &qctrl->flags);
+ qctrl->minimum = min;
+ qctrl->maximum = max;
+ qctrl->step = step;
+ qctrl->default_value = def;
+ qctrl->reserved[0] = qctrl->reserved[1] = 0;
+ strlcpy(qctrl->name, name, sizeof(qctrl->name));
+ return 0;
default:
return v4l2_ctrl_query_fill(qctrl, min, max, step, def);
}
- switch (qctrl->id) {
- case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
- qctrl->type = V4L2_CTRL_TYPE_MENU;
- min = 0;
- step = 1;
- break;
- case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
- qctrl->type = V4L2_CTRL_TYPE_BOOLEAN;
- min = 0;
- max = 1;
- step = 1;
- break;
- default:
- qctrl->type = V4L2_CTRL_TYPE_INTEGER;
- break;
- }
- switch (qctrl->id) {
- case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
- case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
- qctrl->flags |= V4L2_CTRL_FLAG_UPDATE;
- break;
- }
- qctrl->minimum = min;
- qctrl->maximum = max;
- qctrl->step = step;
- qctrl->default_value = def;
- qctrl->reserved[0] = qctrl->reserved[1] = 0;
- snprintf(qctrl->name, sizeof(qctrl->name), name);
- return 0;
}
int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
@@ -797,42 +884,6 @@ const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
NULL
};
- static const char *cx2341x_video_spatial_filter_mode_menu[] = {
- "Manual",
- "Auto",
- NULL
- };
-
- static const char *cx2341x_video_luma_spatial_filter_type_menu[] = {
- "Off",
- "1D Horizontal",
- "1D Vertical",
- "2D H/V Separable",
- "2D Symmetric non-separable",
- NULL
- };
-
- static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = {
- "Off",
- "1D Horizontal",
- NULL
- };
-
- static const char *cx2341x_video_temporal_filter_mode_menu[] = {
- "Manual",
- "Auto",
- NULL
- };
-
- static const char *cx2341x_video_median_filter_type_menu[] = {
- "Off",
- "Horizontal",
- "Vertical",
- "Horizontal/Vertical",
- "Diagonal",
- NULL
- };
-
switch (id) {
case V4L2_CID_MPEG_STREAM_TYPE:
return (p->capabilities & CX2341X_CAP_HAS_TS) ?
@@ -844,26 +895,17 @@ const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
return NULL;
case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
- return cx2341x_video_spatial_filter_mode_menu;
case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
- return cx2341x_video_luma_spatial_filter_type_menu;
case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
- return cx2341x_video_chroma_spatial_filter_type_menu;
case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
- return cx2341x_video_temporal_filter_mode_menu;
case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
- return cx2341x_video_median_filter_type_menu;
+ return cx2341x_get_menu(id);
default:
return v4l2_ctrl_get_menu(id);
}
}
EXPORT_SYMBOL(cx2341x_ctrl_get_menu);
-/* definitions for audio properties bits 29-28 */
-#define CX2341X_AUDIO_ENCODING_METHOD_MPEG 0
-#define CX2341X_AUDIO_ENCODING_METHOD_AC3 1
-#define CX2341X_AUDIO_ENCODING_METHOD_LPCM 2
-
static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params)
{
params->audio_properties =
@@ -1195,9 +1237,490 @@ void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix)
}
EXPORT_SYMBOL(cx2341x_log_status);
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
+
+/********************** NEW CODE *********************/
+
+static inline struct cx2341x_handler *to_cxhdl(struct v4l2_ctrl *ctrl)
+{
+ return container_of(ctrl->handler, struct cx2341x_handler, hdl);
+}
+
+static int cx2341x_hdl_api(struct cx2341x_handler *hdl,
+ u32 cmd, int args, ...)
+{
+ u32 data[CX2341X_MBOX_MAX_DATA];
+ va_list vargs;
+ int i;
+
+ va_start(vargs, args);
+
+ for (i = 0; i < args; i++)
+ data[i] = va_arg(vargs, int);
+ va_end(vargs);
+ return hdl->func(hdl->priv, cmd, args, 0, data);
+}
+
+/* ctrl->handler->lock is held, so it is safe to access cur.val */
+static inline int cx2341x_neq(struct v4l2_ctrl *ctrl)
+{
+ return ctrl && ctrl->val != ctrl->cur.val;
+}
+
+static int cx2341x_try_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct cx2341x_handler *hdl = to_cxhdl(ctrl);
+ s32 val = ctrl->val;
+
+ switch (ctrl->id) {
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES: {
+ /* video gop cluster */
+ int b = val + 1;
+ int gop = hdl->video_gop_size->val;
+
+ gop = b * ((gop + b - 1) / b);
+
+ /* Max GOP size = 34 */
+ while (gop > 34)
+ gop -= b;
+ hdl->video_gop_size->val = gop;
+ break;
+ }
+
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ /* stream type cluster */
+ hdl->video_encoding->val =
+ (hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_SS ||
+ hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ?
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_1 :
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_2;
+ if (hdl->video_encoding->val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
+ /* MPEG-1 implies CBR */
+ hdl->video_bitrate_mode->val =
+ V4L2_MPEG_VIDEO_BITRATE_MODE_CBR;
+ /* peak bitrate shall be >= normal bitrate */
+ if (hdl->video_bitrate_mode->val == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR &&
+ hdl->video_bitrate_peak->val < hdl->video_bitrate->val)
+ hdl->video_bitrate_peak->val = hdl->video_bitrate->val;
+ break;
+ }
+ return 0;
+}
+
+static int cx2341x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ static const int mpeg_stream_type[] = {
+ 0, /* MPEG-2 PS */
+ 1, /* MPEG-2 TS */
+ 2, /* MPEG-1 SS */
+ 14, /* DVD */
+ 11, /* VCD */
+ 12, /* SVCD */
+ };
+ struct cx2341x_handler *hdl = to_cxhdl(ctrl);
+ s32 val = ctrl->val;
+ u32 props;
+ int err;
+
+ switch (ctrl->id) {
+ case V4L2_CID_MPEG_STREAM_VBI_FMT:
+ if (hdl->ops && hdl->ops->s_stream_vbi_fmt)
+ return hdl->ops->s_stream_vbi_fmt(hdl, val);
+ return 0;
+
+ case V4L2_CID_MPEG_VIDEO_ASPECT:
+ return cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_ASPECT_RATIO, 1, val + 1);
+
+ case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_CLOSURE, 1, val);
+
+ case V4L2_CID_MPEG_AUDIO_MUTE:
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_AUDIO, 1, val);
+
+ case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION:
+ return cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_FRAME_DROP_RATE, 1, val);
+
+ case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_MISC, 2, 7, val);
+
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
+ /* audio properties cluster */
+ props = (hdl->audio_sampling_freq->val << 0) |
+ (hdl->audio_mode->val << 8) |
+ (hdl->audio_mode_extension->val << 10) |
+ (hdl->audio_crc->val << 14);
+ if (hdl->audio_emphasis->val == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17)
+ props |= 3 << 12;
+ else
+ props |= hdl->audio_emphasis->val << 12;
+
+ if (hdl->audio_encoding->val == V4L2_MPEG_AUDIO_ENCODING_AC3) {
+ props |=
+#if 1
+ /* Not sure if this MPEG Layer II setting is required */
+ ((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) |
+#endif
+ (hdl->audio_ac3_bitrate->val << 4) |
+ (CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28);
+ } else {
+ /* Assuming MPEG Layer II */
+ props |=
+ ((3 - hdl->audio_encoding->val) << 2) |
+ ((1 + hdl->audio_l2_bitrate->val) << 4);
+ }
+ err = cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, props);
+ if (err)
+ return err;
+
+ hdl->audio_properties = props;
+ if (hdl->audio_ac3_bitrate) {
+ int is_ac3 = hdl->audio_encoding->val ==
+ V4L2_MPEG_AUDIO_ENCODING_AC3;
+
+ v4l2_ctrl_activate(hdl->audio_ac3_bitrate, is_ac3);
+ v4l2_ctrl_activate(hdl->audio_l2_bitrate, !is_ac3);
+ }
+ v4l2_ctrl_activate(hdl->audio_mode_extension,
+ hdl->audio_mode->val == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO);
+ if (cx2341x_neq(hdl->audio_sampling_freq) &&
+ hdl->ops && hdl->ops->s_audio_sampling_freq)
+ return hdl->ops->s_audio_sampling_freq(hdl, hdl->audio_sampling_freq->val);
+ if (cx2341x_neq(hdl->audio_mode) &&
+ hdl->ops && hdl->ops->s_audio_mode)
+ return hdl->ops->s_audio_mode(hdl, hdl->audio_mode->val);
+ return 0;
+
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES:
+ /* video gop cluster */
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_PROPERTIES, 2,
+ hdl->video_gop_size->val,
+ hdl->video_b_frames->val + 1);
+
+ case V4L2_CID_MPEG_STREAM_TYPE:
+ /* stream type cluster */
+ err = cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_STREAM_TYPE, 1, mpeg_stream_type[val]);
+ if (err)
+ return err;
+
+ err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_BIT_RATE, 5,
+ hdl->video_bitrate_mode->val,
+ hdl->video_bitrate->val,
+ hdl->video_bitrate_peak->val / 400, 0, 0);
+ if (err)
+ return err;
+
+ v4l2_ctrl_activate(hdl->video_bitrate_mode,
+ hdl->video_encoding->val != V4L2_MPEG_VIDEO_ENCODING_MPEG_1);
+ v4l2_ctrl_activate(hdl->video_bitrate_peak,
+ hdl->video_bitrate_mode->val != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR);
+ if (cx2341x_neq(hdl->video_encoding) &&
+ hdl->ops && hdl->ops->s_video_encoding)
+ return hdl->ops->s_video_encoding(hdl, hdl->video_encoding->val);
+ return 0;
+
+ case V4L2_CID_MPEG_VIDEO_MUTE:
+ /* video mute cluster */
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_VIDEO, 1,
+ hdl->video_mute->val |
+ (hdl->video_mute_yuv->val << 8));
+
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: {
+ int active_filter;
+
+ /* video filter mode */
+ err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_MODE, 2,
+ hdl->video_spatial_filter_mode->val |
+ (hdl->video_temporal_filter_mode->val << 1),
+ hdl->video_median_filter_type->val);
+ if (err)
+ return err;
+
+ active_filter = hdl->video_spatial_filter_mode->val !=
+ V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO;
+ v4l2_ctrl_activate(hdl->video_spatial_filter, active_filter);
+ v4l2_ctrl_activate(hdl->video_luma_spatial_filter_type, active_filter);
+ v4l2_ctrl_activate(hdl->video_chroma_spatial_filter_type, active_filter);
+ active_filter = hdl->video_temporal_filter_mode->val !=
+ V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO;
+ v4l2_ctrl_activate(hdl->video_temporal_filter, active_filter);
+ active_filter = hdl->video_median_filter_type->val !=
+ V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF;
+ v4l2_ctrl_activate(hdl->video_luma_median_filter_bottom, active_filter);
+ v4l2_ctrl_activate(hdl->video_luma_median_filter_top, active_filter);
+ v4l2_ctrl_activate(hdl->video_chroma_median_filter_bottom, active_filter);
+ v4l2_ctrl_activate(hdl->video_chroma_median_filter_top, active_filter);
+ return 0;
+ }
+
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
+ /* video filter type cluster */
+ return cx2341x_hdl_api(hdl,
+ CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, 2,
+ hdl->video_luma_spatial_filter_type->val,
+ hdl->video_chroma_spatial_filter_type->val);
+
+ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
+ /* video filter cluster */
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_PROPS, 2,
+ hdl->video_spatial_filter->val,
+ hdl->video_temporal_filter->val);
+
+ case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
+ /* video median cluster */
+ return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_CORING_LEVELS, 4,
+ hdl->video_luma_median_filter_bottom->val,
+ hdl->video_luma_median_filter_top->val,
+ hdl->video_chroma_median_filter_bottom->val,
+ hdl->video_chroma_median_filter_top->val);
+ }
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops cx2341x_ops = {
+ .try_ctrl = cx2341x_try_ctrl,
+ .s_ctrl = cx2341x_s_ctrl,
+};
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+ u32 id, s32 min, s32 max, s32 step, s32 def)
+{
+ struct v4l2_ctrl_config cfg;
+
+ cx2341x_ctrl_fill(id, &cfg.name, &cfg.type, &min, &max, &step, &def, &cfg.flags);
+ cfg.ops = &cx2341x_ops;
+ cfg.id = id;
+ cfg.min = min;
+ cfg.max = max;
+ cfg.def = def;
+ if (cfg.type == V4L2_CTRL_TYPE_MENU) {
+ cfg.step = 0;
+ cfg.menu_skip_mask = step;
+ cfg.qmenu = cx2341x_get_menu(id);
+ } else {
+ cfg.step = step;
+ cfg.menu_skip_mask = 0;
+ }
+ return v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+}
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ u32 id, s32 min, s32 max, s32 step, s32 def)
+{
+ return v4l2_ctrl_new_std(hdl, &cx2341x_ops, id, min, max, step, def);
+}
+
+static struct v4l2_ctrl *cx2341x_ctrl_new_menu(struct v4l2_ctrl_handler *hdl,
+ u32 id, s32 max, s32 mask, s32 def)
+{
+ return v4l2_ctrl_new_std_menu(hdl, &cx2341x_ops, id, max, mask, def);
+}
+
+int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
+ unsigned nr_of_controls_hint)
+{
+ struct v4l2_ctrl_handler *hdl = &cxhdl->hdl;
+ u32 caps = cxhdl->capabilities;
+ int has_sliced_vbi = caps & CX2341X_CAP_HAS_SLICED_VBI;
+ int has_ac3 = caps & CX2341X_CAP_HAS_AC3;
+ int has_ts = caps & CX2341X_CAP_HAS_TS;
+
+ cxhdl->width = 720;
+ cxhdl->height = 480;
+
+ v4l2_ctrl_handler_init(hdl, nr_of_controls_hint);
+
+ /* Add controls in ascending control ID order for fastest
+ insertion time. */
+ cxhdl->stream_type = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_STREAM_TYPE,
+ V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, has_ts ? 0 : 2,
+ V4L2_MPEG_STREAM_TYPE_MPEG2_PS);
+ cxhdl->stream_vbi_fmt = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_STREAM_VBI_FMT,
+ V4L2_MPEG_STREAM_VBI_FMT_IVTV, has_sliced_vbi ? 0 : 2,
+ V4L2_MPEG_STREAM_VBI_FMT_NONE);
+ cxhdl->audio_sampling_freq = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
+ V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 0,
+ V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000);
+ cxhdl->audio_encoding = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_ENCODING,
+ V4L2_MPEG_AUDIO_ENCODING_AC3, has_ac3 ? ~0x12 : ~0x2,
+ V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
+ cxhdl->audio_l2_bitrate = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_L2_BITRATE,
+ V4L2_MPEG_AUDIO_L2_BITRATE_384K, 0x1ff,
+ V4L2_MPEG_AUDIO_L2_BITRATE_224K);
+ cxhdl->audio_mode = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_MODE,
+ V4L2_MPEG_AUDIO_MODE_MONO, 0,
+ V4L2_MPEG_AUDIO_MODE_STEREO);
+ cxhdl->audio_mode_extension = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_MODE_EXTENSION,
+ V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 0,
+ V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4);
+ cxhdl->audio_emphasis = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_EMPHASIS,
+ V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 0,
+ V4L2_MPEG_AUDIO_EMPHASIS_NONE);
+ cxhdl->audio_crc = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_CRC,
+ V4L2_MPEG_AUDIO_CRC_CRC16, 0,
+ V4L2_MPEG_AUDIO_CRC_NONE);
+
+ cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_AUDIO_MUTE, 0, 1, 1, 0);
+ if (has_ac3)
+ cxhdl->audio_ac3_bitrate = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_AUDIO_AC3_BITRATE,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 0x03,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_224K);
+ cxhdl->video_encoding = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_VIDEO_ENCODING,
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 0,
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
+ cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_VIDEO_ASPECT,
+ V4L2_MPEG_VIDEO_ASPECT_221x100, 0,
+ V4L2_MPEG_VIDEO_ASPECT_4x3);
+ cxhdl->video_b_frames = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_B_FRAMES, 0, 33, 1, 2);
+ cxhdl->video_gop_size = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_GOP_SIZE,
+ 1, 34, 1, cxhdl->is_50hz ? 12 : 15);
+ cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, 0, 1, 1, 1);
+ cxhdl->video_bitrate_mode = cx2341x_ctrl_new_menu(hdl,
+ V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
+ V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0,
+ V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
+ cxhdl->video_bitrate = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_BITRATE,
+ 0, 27000000, 1, 6000000);
+ cxhdl->video_bitrate_peak = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
+ 0, 27000000, 1, 8000000);
+ cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, 0, 255, 1, 0);
+ cxhdl->video_mute = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_MUTE, 0, 1, 1, 0);
+ cxhdl->video_mute_yuv = cx2341x_ctrl_new_std(hdl,
+ V4L2_CID_MPEG_VIDEO_MUTE_YUV, 0, 0xffffff, 1, 0x008080);
+
+ /* CX23415/6 specific */
+ cxhdl->video_spatial_filter_mode = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE,
+ V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL,
+ V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 0,
+ V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL);
+ cxhdl->video_spatial_filter = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+ 0, 15, 1, 0);
+ cxhdl->video_luma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE,
+ V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF,
+ V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE,
+ 0,
+ V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR);
+ cxhdl->video_chroma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE,
+ V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF,
+ V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR,
+ 0,
+ V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR);
+ cxhdl->video_temporal_filter_mode = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE,
+ V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL,
+ V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO,
+ 0,
+ V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL);
+ cxhdl->video_temporal_filter = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER,
+ 0, 31, 1, 8);
+ cxhdl->video_median_filter_type = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE,
+ V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF,
+ V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG,
+ 0,
+ V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF);
+ cxhdl->video_luma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM,
+ 0, 255, 1, 0);
+ cxhdl->video_luma_median_filter_top = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP,
+ 0, 255, 1, 255);
+ cxhdl->video_chroma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM,
+ 0, 255, 1, 0);
+ cxhdl->video_chroma_median_filter_top = cx2341x_ctrl_new_custom(hdl,
+ V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP,
+ 0, 255, 1, 255);
+ cx2341x_ctrl_new_custom(hdl, V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS,
+ 0, 1, 1, 0);
+
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ return err;
+ }
+
+ v4l2_ctrl_cluster(8, &cxhdl->audio_sampling_freq);
+ v4l2_ctrl_cluster(2, &cxhdl->video_b_frames);
+ v4l2_ctrl_cluster(5, &cxhdl->stream_type);
+ v4l2_ctrl_cluster(2, &cxhdl->video_mute);
+ v4l2_ctrl_cluster(3, &cxhdl->video_spatial_filter_mode);
+ v4l2_ctrl_cluster(2, &cxhdl->video_luma_spatial_filter_type);
+ v4l2_ctrl_cluster(2, &cxhdl->video_spatial_filter);
+ v4l2_ctrl_cluster(4, &cxhdl->video_luma_median_filter_top);
+
+ return 0;
+}
+EXPORT_SYMBOL(cx2341x_handler_init);
+
+void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz)
+{
+ cxhdl->is_50hz = is_50hz;
+ cxhdl->video_gop_size->default_value = cxhdl->is_50hz ? 12 : 15;
+}
+EXPORT_SYMBOL(cx2341x_handler_set_50hz);
+
+int cx2341x_handler_setup(struct cx2341x_handler *cxhdl)
+{
+ int h = cxhdl->height;
+ int w = cxhdl->width;
+ int err;
+
+ err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_OUTPUT_PORT, 2, cxhdl->port, 0);
+ if (err)
+ return err;
+ err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_RATE, 1, cxhdl->is_50hz);
+ if (err)
+ return err;
+
+ if (v4l2_ctrl_g_ctrl(cxhdl->video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) {
+ w /= 2;
+ h /= 2;
+ }
+ err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_SIZE, 2, h, w);
+ if (err)
+ return err;
+ return v4l2_ctrl_handler_setup(&cxhdl->hdl);
+}
+EXPORT_SYMBOL(cx2341x_handler_setup);
+
+void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy)
+{
+ v4l2_ctrl_grab(cxhdl->audio_sampling_freq, busy);
+ v4l2_ctrl_grab(cxhdl->audio_encoding, busy);
+ v4l2_ctrl_grab(cxhdl->audio_l2_bitrate, busy);
+ v4l2_ctrl_grab(cxhdl->audio_ac3_bitrate, busy);
+ v4l2_ctrl_grab(cxhdl->stream_vbi_fmt, busy);
+ v4l2_ctrl_grab(cxhdl->stream_type, busy);
+ v4l2_ctrl_grab(cxhdl->video_bitrate_mode, busy);
+ v4l2_ctrl_grab(cxhdl->video_bitrate, busy);
+ v4l2_ctrl_grab(cxhdl->video_bitrate_peak, busy);
+}
+EXPORT_SYMBOL(cx2341x_handler_set_busy);
diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h
index 9ebe8558b9b69..8d08ebfe20b76 100644
--- a/include/media/cx2341x.h
+++ b/include/media/cx2341x.h
@@ -19,6 +19,8 @@
#ifndef CX2341X_H
#define CX2341X_H
+#include <media/v4l2-ctrls.h>
+
enum cx2341x_port {
CX2341X_PORT_MEMORY = 0,
CX2341X_PORT_STREAMING = 1,
@@ -99,6 +101,101 @@ int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix);
+struct cx2341x_handler;
+
+struct cx2341x_handler_ops {
+ /* needed for the video clock freq */
+ int (*s_audio_sampling_freq)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for dualwatch */
+ int (*s_audio_mode)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for setting up the video resolution */
+ int (*s_video_encoding)(struct cx2341x_handler *hdl, u32 val);
+ /* needed for setting up the sliced vbi insertion data structures */
+ int (*s_stream_vbi_fmt)(struct cx2341x_handler *hdl, u32 val);
+};
+
+struct cx2341x_handler {
+ u32 capabilities;
+ enum cx2341x_port port;
+ u16 width;
+ u16 height;
+ u16 is_50hz;
+ u32 audio_properties;
+
+ struct v4l2_ctrl_handler hdl;
+ void *priv;
+ cx2341x_mbox_func func;
+ const struct cx2341x_handler_ops *ops;
+
+ struct v4l2_ctrl *stream_vbi_fmt;
+
+ struct {
+ /* audio cluster */
+ struct v4l2_ctrl *audio_sampling_freq;
+ struct v4l2_ctrl *audio_encoding;
+ struct v4l2_ctrl *audio_l2_bitrate;
+ struct v4l2_ctrl *audio_mode;
+ struct v4l2_ctrl *audio_mode_extension;
+ struct v4l2_ctrl *audio_emphasis;
+ struct v4l2_ctrl *audio_crc;
+ struct v4l2_ctrl *audio_ac3_bitrate;
+ };
+
+ struct {
+ /* video gop cluster */
+ struct v4l2_ctrl *video_b_frames;
+ struct v4l2_ctrl *video_gop_size;
+ };
+
+ struct {
+ /* stream type cluster */
+ struct v4l2_ctrl *stream_type;
+ struct v4l2_ctrl *video_encoding;
+ struct v4l2_ctrl *video_bitrate_mode;
+ struct v4l2_ctrl *video_bitrate;
+ struct v4l2_ctrl *video_bitrate_peak;
+ };
+
+ struct {
+ /* video mute cluster */
+ struct v4l2_ctrl *video_mute;
+ struct v4l2_ctrl *video_mute_yuv;
+ };
+
+ struct {
+ /* video filter mode cluster */
+ struct v4l2_ctrl *video_spatial_filter_mode;
+ struct v4l2_ctrl *video_temporal_filter_mode;
+ struct v4l2_ctrl *video_median_filter_type;
+ };
+
+ struct {
+ /* video filter type cluster */
+ struct v4l2_ctrl *video_luma_spatial_filter_type;
+ struct v4l2_ctrl *video_chroma_spatial_filter_type;
+ };
+
+ struct {
+ /* video filter cluster */
+ struct v4l2_ctrl *video_spatial_filter;
+ struct v4l2_ctrl *video_temporal_filter;
+ };
+
+ struct {
+ /* video median cluster */
+ struct v4l2_ctrl *video_luma_median_filter_top;
+ struct v4l2_ctrl *video_luma_median_filter_bottom;
+ struct v4l2_ctrl *video_chroma_median_filter_top;
+ struct v4l2_ctrl *video_chroma_median_filter_bottom;
+ };
+};
+
+int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
+ unsigned nr_of_controls_hint);
+void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz);
+int cx2341x_handler_setup(struct cx2341x_handler *cxhdl);
+void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy);
+
/* Firmware names */
#define CX2341X_FIRM_ENC_FILENAME "v4l-cx2341x-enc.fw"
/* Decoder firmware for the cx23415 only */
--
GitLab
From 5aa9ae5ed5d449a85fbf7aac3d1fdc241c542a79 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 24 Apr 2010 08:23:53 -0300
Subject: [PATCH 510/863] V4L/DVB: wm8775: convert to the new control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/wm8775.c | 79 +++++++++++++++++++++++-------------
1 file changed, 50 insertions(+), 29 deletions(-)
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index 5c2ba599c0c73..23bad3fd6dc5f 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -35,6 +35,7 @@
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-i2c-drv.h>
MODULE_DESCRIPTION("wm8775 driver");
@@ -53,8 +54,9 @@ enum {
struct wm8775_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct v4l2_ctrl *mute;
u8 input; /* Last selected input (0-0xf) */
- u8 muted;
};
static inline struct wm8775_state *to_state(struct v4l2_subdev *sd)
@@ -62,6 +64,11 @@ static inline struct wm8775_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct wm8775_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct wm8775_state, hdl)->sd;
+}
+
static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -95,7 +102,7 @@ static int wm8775_s_routing(struct v4l2_subdev *sd,
return -EINVAL;
}
state->input = input;
- if (state->muted)
+ if (!v4l2_ctrl_g_ctrl(state->mute))
return 0;
wm8775_write(sd, R21, 0x0c0);
wm8775_write(sd, R14, 0x1d4);
@@ -104,29 +111,21 @@ static int wm8775_s_routing(struct v4l2_subdev *sd,
return 0;
}
-static int wm8775_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct wm8775_state *state = to_state(sd);
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- ctrl->value = state->muted;
- return 0;
-}
-
-static int wm8775_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct wm8775_state *state = to_state(sd);
-
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- state->muted = ctrl->value;
- wm8775_write(sd, R21, 0x0c0);
- wm8775_write(sd, R14, 0x1d4);
- wm8775_write(sd, R15, 0x1d4);
- if (!state->muted)
- wm8775_write(sd, R21, 0x100 + state->input);
- return 0;
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ if (!ctrl->val)
+ wm8775_write(sd, R21, 0x100 + state->input);
+ return 0;
+ }
+ return -EINVAL;
}
static int wm8775_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
@@ -140,8 +139,8 @@ static int wm8775_log_status(struct v4l2_subdev *sd)
{
struct wm8775_state *state = to_state(sd);
- v4l2_info(sd, "Input: %d%s\n", state->input,
- state->muted ? " (muted)" : "");
+ v4l2_info(sd, "Input: %d\n", state->input);
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
@@ -162,11 +161,20 @@ static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *fre
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops wm8775_ctrl_ops = {
+ .s_ctrl = wm8775_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops wm8775_core_ops = {
.log_status = wm8775_log_status,
.g_chip_ident = wm8775_g_chip_ident,
- .g_ctrl = wm8775_g_ctrl,
- .s_ctrl = wm8775_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
};
static const struct v4l2_subdev_tuner_ops wm8775_tuner_ops = {
@@ -205,13 +213,24 @@ static int wm8775_probe(struct i2c_client *client,
v4l_info(client, "chip found @ 0x%02x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct wm8775_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct wm8775_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
state->input = 2;
- state->muted = 0;
+
+ v4l2_ctrl_handler_init(&state->hdl, 1);
+ state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ sd->ctrl_handler = &state->hdl;
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
+ return err;
+ }
/* Initialize wm8775 */
@@ -248,9 +267,11 @@ static int wm8775_probe(struct i2c_client *client,
static int wm8775_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct wm8775_state *state = to_state(sd);
v4l2_device_unregister_subdev(sd);
- kfree(to_state(sd));
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
return 0;
}
--
GitLab
From 251190cffa496ca70d8584fc93e05a6366f670eb Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 23 Apr 2010 10:39:25 -0300
Subject: [PATCH 511/863] V4L/DVB: cs53l32a: convert to new control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/cs53l32a.c | 107 +++++++++++++++++++++------------
1 file changed, 68 insertions(+), 39 deletions(-)
diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
index 3cc135a98d827..cc9e84d75ea72 100644
--- a/drivers/media/video/cs53l32a.c
+++ b/drivers/media/video/cs53l32a.c
@@ -26,10 +26,10 @@
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
-#include <linux/i2c-id.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-i2c-drv.h>
MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC");
@@ -43,6 +43,21 @@ module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
+struct cs53l32a_state {
+ struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+};
+
+static inline struct cs53l32a_state *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct cs53l32a_state, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct cs53l32a_state, hdl)->sd;
+}
+
/* ----------------------------------------------------------------------- */
static int cs53l32a_write(struct v4l2_subdev *sd, u8 reg, u8 value)
@@ -74,31 +89,20 @@ static int cs53l32a_s_routing(struct v4l2_subdev *sd,
return 0;
}
-static int cs53l32a_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int cs53l32a_s_ctrl(struct v4l2_ctrl *ctrl)
{
- if (ctrl->id == V4L2_CID_AUDIO_MUTE) {
- ctrl->value = (cs53l32a_read(sd, 0x03) & 0xc0) != 0;
- return 0;
- }
- if (ctrl->id != V4L2_CID_AUDIO_VOLUME)
- return -EINVAL;
- ctrl->value = (s8)cs53l32a_read(sd, 0x04);
- return 0;
-}
+ struct v4l2_subdev *sd = to_sd(ctrl);
-static int cs53l32a_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- if (ctrl->id == V4L2_CID_AUDIO_MUTE) {
- cs53l32a_write(sd, 0x03, ctrl->value ? 0xf0 : 0x30);
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ cs53l32a_write(sd, 0x03, ctrl->val ? 0xf0 : 0x30);
+ return 0;
+ case V4L2_CID_AUDIO_VOLUME:
+ cs53l32a_write(sd, 0x04, (u8)ctrl->val);
+ cs53l32a_write(sd, 0x05, (u8)ctrl->val);
return 0;
}
- if (ctrl->id != V4L2_CID_AUDIO_VOLUME)
- return -EINVAL;
- if (ctrl->value > 12 || ctrl->value < -96)
- return -EINVAL;
- cs53l32a_write(sd, 0x04, (u8) ctrl->value);
- cs53l32a_write(sd, 0x05, (u8) ctrl->value);
- return 0;
+ return -EINVAL;
}
static int cs53l32a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
@@ -111,23 +115,30 @@ static int cs53l32a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_id
static int cs53l32a_log_status(struct v4l2_subdev *sd)
{
+ struct cs53l32a_state *state = to_state(sd);
u8 v = cs53l32a_read(sd, 0x01);
- u8 m = cs53l32a_read(sd, 0x03);
- s8 vol = cs53l32a_read(sd, 0x04);
- v4l2_info(sd, "Input: %d%s\n", (v >> 4) & 3,
- (m & 0xC0) ? " (muted)" : "");
- v4l2_info(sd, "Volume: %d dB\n", vol);
+ v4l2_info(sd, "Input: %d\n", (v >> 4) & 3);
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops cs53l32a_ctrl_ops = {
+ .s_ctrl = cs53l32a_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops cs53l32a_core_ops = {
.log_status = cs53l32a_log_status,
.g_chip_ident = cs53l32a_g_chip_ident,
- .g_ctrl = cs53l32a_g_ctrl,
- .s_ctrl = cs53l32a_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
};
static const struct v4l2_subdev_audio_ops cs53l32a_audio_ops = {
@@ -151,6 +162,7 @@ static const struct v4l2_subdev_ops cs53l32a_ops = {
static int cs53l32a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct cs53l32a_state *state;
struct v4l2_subdev *sd;
int i;
@@ -164,9 +176,10 @@ static int cs53l32a_probe(struct i2c_client *client,
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
- if (sd == NULL)
+ state = kzalloc(sizeof(struct cs53l32a_state), GFP_KERNEL);
+ if (state == NULL)
return -ENOMEM;
+ sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &cs53l32a_ops);
for (i = 1; i <= 7; i++) {
@@ -175,15 +188,29 @@ static int cs53l32a_probe(struct i2c_client *client,
v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v);
}
+ v4l2_ctrl_handler_init(&state->hdl, 2);
+ v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, -96, 12, 1, 0);
+ v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ sd->ctrl_handler = &state->hdl;
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
+ return err;
+ }
+
/* Set cs53l32a internal register for Adaptec 2010/2410 setup */
- cs53l32a_write(sd, 0x01, (u8) 0x21);
- cs53l32a_write(sd, 0x02, (u8) 0x29);
- cs53l32a_write(sd, 0x03, (u8) 0x30);
- cs53l32a_write(sd, 0x04, (u8) 0x00);
- cs53l32a_write(sd, 0x05, (u8) 0x00);
- cs53l32a_write(sd, 0x06, (u8) 0x00);
- cs53l32a_write(sd, 0x07, (u8) 0x00);
+ cs53l32a_write(sd, 0x01, 0x21);
+ cs53l32a_write(sd, 0x02, 0x29);
+ cs53l32a_write(sd, 0x03, 0x30);
+ cs53l32a_write(sd, 0x04, 0x00);
+ cs53l32a_write(sd, 0x05, 0x00);
+ cs53l32a_write(sd, 0x06, 0x00);
+ cs53l32a_write(sd, 0x07, 0x00);
/* Display results, should be 0x21,0x29,0x30,0x00,0x00,0x00,0x00 */
@@ -198,9 +225,11 @@ static int cs53l32a_probe(struct i2c_client *client,
static int cs53l32a_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct cs53l32a_state *state = to_state(sd);
v4l2_device_unregister_subdev(sd);
- kfree(sd);
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
return 0;
}
--
GitLab
From f687d19d223d853f6b3def29c55eb4b67bd44a40 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 24 May 2010 10:18:26 -0300
Subject: [PATCH 512/863] V4L/DVB: wm8739: convert to the new control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/wm8739.c | 179 ++++++++++++-----------------------
1 file changed, 62 insertions(+), 117 deletions(-)
diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c
index a11b99b4226b8..d5965543ecab7 100644
--- a/drivers/media/video/wm8739.c
+++ b/drivers/media/video/wm8739.c
@@ -27,11 +27,11 @@
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
-#include <linux/i2c-id.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-ctrls.h>
MODULE_DESCRIPTION("wm8739 driver");
MODULE_AUTHOR("T. Adachi, Hans Verkuil");
@@ -54,12 +54,14 @@ enum {
struct wm8739_state {
struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* audio cluster */
+ struct v4l2_ctrl *volume;
+ struct v4l2_ctrl *mute;
+ struct v4l2_ctrl *balance;
+ };
u32 clock_freq;
- u8 muted;
- u16 volume;
- u16 balance;
- u8 vol_l; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
- u8 vol_r; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
};
static inline struct wm8739_state *to_state(struct v4l2_subdev *sd)
@@ -67,6 +69,11 @@ static inline struct wm8739_state *to_state(struct v4l2_subdev *sd)
return container_of(sd, struct wm8739_state, sd);
}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct wm8739_state, hdl)->sd;
+}
+
/* ------------------------------------------------------------------------ */
static int wm8739_write(struct v4l2_subdev *sd, int reg, u16 val)
@@ -89,58 +96,17 @@ static int wm8739_write(struct v4l2_subdev *sd, int reg, u16 val)
return -1;
}
-/* write regs to set audio volume etc */
-static void wm8739_set_audio(struct v4l2_subdev *sd)
-{
- struct wm8739_state *state = to_state(sd);
- u16 mute = state->muted ? 0x80 : 0;
-
- /* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB
- * Default setting: 0x17 = 0 dB
- */
- wm8739_write(sd, R0, (state->vol_l & 0x1f) | mute);
- wm8739_write(sd, R1, (state->vol_r & 0x1f) | mute);
-}
-
-static int wm8739_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct wm8739_state *state = to_state(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = state->muted;
- break;
-
- case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = state->volume;
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- ctrl->value = state->balance;
- break;
-
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int wm8739_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int wm8739_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct wm8739_state *state = to_state(sd);
unsigned int work_l, work_r;
+ u8 vol_l; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
+ u8 vol_r; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
+ u16 mute;
switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- state->muted = ctrl->value;
- break;
-
case V4L2_CID_AUDIO_VOLUME:
- state->volume = ctrl->value;
- break;
-
- case V4L2_CID_AUDIO_BALANCE:
- state->balance = ctrl->value;
break;
default:
@@ -148,52 +114,25 @@ static int wm8739_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
}
/* normalize ( 65535 to 0 -> 31 to 0 (12dB to -34.5dB) ) */
- work_l = (min(65536 - state->balance, 32768) * state->volume) / 32768;
- work_r = (min(state->balance, (u16)32768) * state->volume) / 32768;
+ work_l = (min(65536 - state->balance->val, 32768) * state->volume->val) / 32768;
+ work_r = (min(state->balance->val, 32768) * state->volume->val) / 32768;
- state->vol_l = (long)work_l * 31 / 65535;
- state->vol_r = (long)work_r * 31 / 65535;
+ vol_l = (long)work_l * 31 / 65535;
+ vol_r = (long)work_r * 31 / 65535;
/* set audio volume etc. */
- wm8739_set_audio(sd);
+ mute = state->mute->val ? 0x80 : 0;
+
+ /* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB
+ * Default setting: 0x17 = 0 dB
+ */
+ wm8739_write(sd, R0, (vol_l & 0x1f) | mute);
+ wm8739_write(sd, R1, (vol_r & 0x1f) | mute);
return 0;
}
/* ------------------------------------------------------------------------ */
-static struct v4l2_queryctrl wm8739_qctrl[] = {
- {
- .id = V4L2_CID_AUDIO_VOLUME,
- .name = "Volume",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535/100,
- .default_value = 58880,
- .flags = 0,
- .type = V4L2_CTRL_TYPE_INTEGER,
- }, {
- .id = V4L2_CID_AUDIO_MUTE,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- .flags = 0,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- }, {
- .id = V4L2_CID_AUDIO_BALANCE,
- .name = "Balance",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535/100,
- .default_value = 32768,
- .flags = 0,
- .type = V4L2_CTRL_TYPE_INTEGER,
- }
-};
-
-/* ------------------------------------------------------------------------ */
-
static int wm8739_s_clock_freq(struct v4l2_subdev *sd, u32 audiofreq)
{
struct wm8739_state *state = to_state(sd);
@@ -222,18 +161,6 @@ static int wm8739_s_clock_freq(struct v4l2_subdev *sd, u32 audiofreq)
return 0;
}
-static int wm8739_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(wm8739_qctrl); i++)
- if (qc->id && qc->id == wm8739_qctrl[i].id) {
- memcpy(qc, &wm8739_qctrl[i], sizeof(*qc));
- return 0;
- }
- return -EINVAL;
-}
-
static int wm8739_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -246,21 +173,26 @@ static int wm8739_log_status(struct v4l2_subdev *sd)
struct wm8739_state *state = to_state(sd);
v4l2_info(sd, "Frequency: %u Hz\n", state->clock_freq);
- v4l2_info(sd, "Volume L: %02x%s\n", state->vol_l & 0x1f,
- state->muted ? " (muted)" : "");
- v4l2_info(sd, "Volume R: %02x%s\n", state->vol_r & 0x1f,
- state->muted ? " (muted)" : "");
+ v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
return 0;
}
/* ----------------------------------------------------------------------- */
+static const struct v4l2_ctrl_ops wm8739_ctrl_ops = {
+ .s_ctrl = wm8739_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops wm8739_core_ops = {
.log_status = wm8739_log_status,
.g_chip_ident = wm8739_g_chip_ident,
- .queryctrl = wm8739_queryctrl,
- .g_ctrl = wm8739_g_ctrl,
- .s_ctrl = wm8739_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
};
static const struct v4l2_subdev_audio_ops wm8739_audio_ops = {
@@ -289,17 +221,28 @@ static int wm8739_probe(struct i2c_client *client,
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct wm8739_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct wm8739_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &wm8739_ops);
- state->vol_l = 0x17; /* 0dB */
- state->vol_r = 0x17; /* 0dB */
- state->muted = 0;
- state->balance = 32768;
- /* normalize (12dB(31) to -34.5dB(0) [0dB(23)] -> 65535 to 0) */
- state->volume = ((long)state->vol_l + 1) * 65535 / 31;
+ v4l2_ctrl_handler_init(&state->hdl, 2);
+ state->volume = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 50736);
+ state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ state->balance = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
+ V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
+ sd->ctrl_handler = &state->hdl;
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
+ v4l2_ctrl_handler_free(&state->hdl);
+ kfree(state);
+ return err;
+ }
+ v4l2_ctrl_cluster(3, &state->volume);
+
state->clock_freq = 48000;
/* Initialize wm8739 */
@@ -318,15 +261,17 @@ static int wm8739_probe(struct i2c_client *client,
/* activate */
wm8739_write(sd, R9, 0x001);
/* set volume/mute */
- wm8739_set_audio(sd);
+ v4l2_ctrl_handler_setup(&state->hdl);
return 0;
}
static int wm8739_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct wm8739_state *state = to_state(sd);
v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(&state->hdl);
kfree(to_state(sd));
return 0;
}
--
GitLab
From 2fd781448acd6cbc3ca9d2f48b0e16f67a77bf51 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 23 Apr 2010 09:09:41 -0300
Subject: [PATCH 513/863] V4L/DVB: ivtv: convert gpio subdev to new control
framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/ivtv/ivtv-driver.c | 1 +
drivers/media/video/ivtv/ivtv-driver.h | 1 +
drivers/media/video/ivtv/ivtv-gpio.c | 77 ++++++++++++--------------
3 files changed, 38 insertions(+), 41 deletions(-)
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index f72e9d1cee09c..53ea31aab155b 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1386,6 +1386,7 @@ static void ivtv_remove(struct pci_dev *pdev)
printk(KERN_INFO "ivtv: Removed %s\n", itv->card_name);
v4l2_device_unregister(&itv->v4l2_dev);
+ v4l2_ctrl_handler_free(&itv->hdl_gpio);
kfree(itv);
}
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 102071246218d..d2260de4c8124 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -632,6 +632,7 @@ struct ivtv {
struct v4l2_device v4l2_dev;
struct v4l2_subdev sd_gpio; /* GPIO sub-device */
+ struct v4l2_ctrl_handler hdl_gpio;
u16 instance;
/* High-level state info */
diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c
index aede061cae5d0..8f0d07789053b 100644
--- a/drivers/media/video/ivtv/ivtv-gpio.c
+++ b/drivers/media/video/ivtv/ivtv-gpio.c
@@ -24,6 +24,7 @@
#include "ivtv-gpio.h"
#include "tuner-xc2028.h"
#include <media/tuner.h>
+#include <media/v4l2-ctrls.h>
/*
* GPIO assignment of Yuan MPG600/MPG160
@@ -149,16 +150,10 @@ static inline struct ivtv *sd_to_ivtv(struct v4l2_subdev *sd)
return container_of(sd, struct ivtv, sd_gpio);
}
-static struct v4l2_queryctrl gpio_ctrl_mute = {
- .id = V4L2_CID_AUDIO_MUTE,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- .flags = 0,
-};
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct ivtv, hdl_gpio)->sd_gpio;
+}
static int subdev_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
{
@@ -262,40 +257,24 @@ static int subdev_s_audio_routing(struct v4l2_subdev *sd,
return 0;
}
-static int subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int subdev_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct v4l2_subdev *sd = to_sd(ctrl);
struct ivtv *itv = sd_to_ivtv(sd);
u16 mask, data;
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- mask = itv->card->gpio_audio_mute.mask;
- data = itv->card->gpio_audio_mute.mute;
- ctrl->value = (read_reg(IVTV_REG_GPIO_OUT) & mask) == data;
- return 0;
-}
-
-static int subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct ivtv *itv = sd_to_ivtv(sd);
- u16 mask, data;
-
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- mask = itv->card->gpio_audio_mute.mask;
- data = ctrl->value ? itv->card->gpio_audio_mute.mute : 0;
- if (mask)
- write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) | (data & mask), IVTV_REG_GPIO_OUT);
- return 0;
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ mask = itv->card->gpio_audio_mute.mask;
+ data = ctrl->val ? itv->card->gpio_audio_mute.mute : 0;
+ if (mask)
+ write_reg((read_reg(IVTV_REG_GPIO_OUT) & ~mask) |
+ (data & mask), IVTV_REG_GPIO_OUT);
+ return 0;
+ }
+ return -EINVAL;
}
-static int subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- if (qc->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- *qc = gpio_ctrl_mute;
- return 0;
-}
static int subdev_log_status(struct v4l2_subdev *sd)
{
@@ -304,6 +283,7 @@ static int subdev_log_status(struct v4l2_subdev *sd)
IVTV_INFO("GPIO status: DIR=0x%04x OUT=0x%04x IN=0x%04x\n",
read_reg(IVTV_REG_GPIO_DIR), read_reg(IVTV_REG_GPIO_OUT),
read_reg(IVTV_REG_GPIO_IN));
+ v4l2_ctrl_handler_log_status(&itv->hdl_gpio, sd->name);
return 0;
}
@@ -327,11 +307,19 @@ static int subdev_s_video_routing(struct v4l2_subdev *sd,
return 0;
}
+static const struct v4l2_ctrl_ops gpio_ctrl_ops = {
+ .s_ctrl = subdev_s_ctrl,
+};
+
static const struct v4l2_subdev_core_ops subdev_core_ops = {
.log_status = subdev_log_status,
- .g_ctrl = subdev_g_ctrl,
- .s_ctrl = subdev_s_ctrl,
- .queryctrl = subdev_queryctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
};
static const struct v4l2_subdev_tuner_ops subdev_tuner_ops = {
@@ -375,5 +363,12 @@ int ivtv_gpio_init(struct ivtv *itv)
v4l2_subdev_init(&itv->sd_gpio, &subdev_ops);
snprintf(itv->sd_gpio.name, sizeof(itv->sd_gpio.name), "%s-gpio", itv->v4l2_dev.name);
itv->sd_gpio.grp_id = IVTV_HW_GPIO;
+ v4l2_ctrl_handler_init(&itv->hdl_gpio, 1);
+ v4l2_ctrl_new_std(&itv->hdl_gpio, &gpio_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+ if (itv->hdl_gpio.error)
+ return itv->hdl_gpio.error;
+ itv->sd_gpio.ctrl_handler = &itv->hdl_gpio;
+ v4l2_ctrl_handler_setup(&itv->hdl_gpio);
return v4l2_device_register_subdev(&itv->v4l2_dev, &itv->sd_gpio);
}
--
GitLab
From f7b80e6919df812b4bed99a927325312a904111b Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 27 Jun 2010 06:07:26 -0300
Subject: [PATCH 514/863] V4L/DVB: ivtv: convert to the new control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/ivtv/ivtv-controls.c | 276 +++--------------------
drivers/media/video/ivtv/ivtv-controls.h | 6 +-
drivers/media/video/ivtv/ivtv-driver.c | 18 +-
drivers/media/video/ivtv/ivtv-driver.h | 5 +-
drivers/media/video/ivtv/ivtv-fileops.c | 23 +-
drivers/media/video/ivtv/ivtv-firmware.c | 6 +-
drivers/media/video/ivtv/ivtv-ioctl.c | 31 ++-
drivers/media/video/ivtv/ivtv-streams.c | 24 +-
8 files changed, 88 insertions(+), 301 deletions(-)
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index b588e30cbcf02..b31ee1bceef82 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -17,163 +17,14 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/kernel.h>
-#include <linux/slab.h>
#include "ivtv-driver.h"
-#include "ivtv-cards.h"
#include "ivtv-ioctl.h"
-#include "ivtv-routing.h"
-#include "ivtv-i2c.h"
-#include "ivtv-mailbox.h"
#include "ivtv-controls.h"
-/* Must be sorted from low to high control ID! */
-static const u32 user_ctrls[] = {
- V4L2_CID_USER_CLASS,
- V4L2_CID_BRIGHTNESS,
- V4L2_CID_CONTRAST,
- V4L2_CID_SATURATION,
- V4L2_CID_HUE,
- V4L2_CID_AUDIO_VOLUME,
- V4L2_CID_AUDIO_BALANCE,
- V4L2_CID_AUDIO_BASS,
- V4L2_CID_AUDIO_TREBLE,
- V4L2_CID_AUDIO_MUTE,
- V4L2_CID_AUDIO_LOUDNESS,
- 0
-};
-
-static const u32 *ctrl_classes[] = {
- user_ctrls,
- cx2341x_mpeg_ctrls,
- NULL
-};
-
-
-int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
-{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
- const char *name;
-
- qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id);
- if (qctrl->id == 0)
- return -EINVAL;
-
- switch (qctrl->id) {
- /* Standard V4L2 controls */
- case V4L2_CID_USER_CLASS:
- return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_HUE:
- case V4L2_CID_SATURATION:
- case V4L2_CID_CONTRAST:
- if (v4l2_subdev_call(itv->sd_video, core, queryctrl, qctrl))
- qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
-
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_LOUDNESS:
- if (v4l2_subdev_call(itv->sd_audio, core, queryctrl, qctrl))
- qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
-
- default:
- if (cx2341x_ctrl_query(&itv->params, qctrl))
- qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
- }
- strncpy(qctrl->name, name, sizeof(qctrl->name) - 1);
- qctrl->name[sizeof(qctrl->name) - 1] = 0;
- return 0;
-}
-
-int ivtv_querymenu(struct file *file, void *fh, struct v4l2_querymenu *qmenu)
-{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
- struct v4l2_queryctrl qctrl;
-
- qctrl.id = qmenu->id;
- ivtv_queryctrl(file, fh, &qctrl);
- return v4l2_ctrl_query_menu(qmenu, &qctrl,
- cx2341x_ctrl_get_menu(&itv->params, qmenu->id));
-}
-
-static int ivtv_try_ctrl(struct file *file, void *fh,
- struct v4l2_ext_control *vctrl)
-{
- struct v4l2_queryctrl qctrl;
- const char **menu_items = NULL;
- int err;
-
- qctrl.id = vctrl->id;
- err = ivtv_queryctrl(file, fh, &qctrl);
- if (err)
- return err;
- if (qctrl.type == V4L2_CTRL_TYPE_MENU)
- menu_items = v4l2_ctrl_get_menu(qctrl.id);
- return v4l2_ctrl_check(vctrl, &qctrl, menu_items);
-}
-
-static int ivtv_s_ctrl(struct ivtv *itv, struct v4l2_control *vctrl)
-{
- switch (vctrl->id) {
- /* Standard V4L2 controls */
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_HUE:
- case V4L2_CID_SATURATION:
- case V4L2_CID_CONTRAST:
- return v4l2_subdev_call(itv->sd_video, core, s_ctrl, vctrl);
-
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_LOUDNESS:
- return v4l2_subdev_call(itv->sd_audio, core, s_ctrl, vctrl);
-
- default:
- IVTV_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id);
- return -EINVAL;
- }
- return 0;
-}
-
-static int ivtv_g_ctrl(struct ivtv *itv, struct v4l2_control *vctrl)
+static int ivtv_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
{
- switch (vctrl->id) {
- /* Standard V4L2 controls */
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_HUE:
- case V4L2_CID_SATURATION:
- case V4L2_CID_CONTRAST:
- return v4l2_subdev_call(itv->sd_video, core, g_ctrl, vctrl);
-
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_LOUDNESS:
- return v4l2_subdev_call(itv->sd_audio, core, g_ctrl, vctrl);
- default:
- IVTV_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id);
- return -EINVAL;
- }
- return 0;
-}
-
-static int ivtv_setup_vbi_fmt(struct ivtv *itv, enum v4l2_mpeg_stream_vbi_fmt fmt)
-{
- if (!(itv->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE))
- return -EINVAL;
- if (atomic_read(&itv->capturing) > 0)
- return -EBUSY;
+ struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
/* First try to allocate sliced VBI buffers if needed. */
if (fmt && itv->vbi.sliced_mpeg_data[0] == NULL) {
@@ -208,106 +59,43 @@ static int ivtv_setup_vbi_fmt(struct ivtv *itv, enum v4l2_mpeg_stream_vbi_fmt fm
return 0;
}
-int ivtv_g_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val)
{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
- struct v4l2_control ctrl;
-
- if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
- int i;
- int err = 0;
-
- for (i = 0; i < c->count; i++) {
- ctrl.id = c->controls[i].id;
- ctrl.value = c->controls[i].value;
- err = ivtv_g_ctrl(itv, &ctrl);
- c->controls[i].value = ctrl.value;
- if (err) {
- c->error_idx = i;
- break;
- }
- }
- return err;
- }
- if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
- return cx2341x_ext_ctrls(&itv->params, 0, c, VIDIOC_G_EXT_CTRLS);
- return -EINVAL;
+ struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
+ int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
+ struct v4l2_mbus_framefmt fmt;
+
+ /* fix videodecoder resolution */
+ fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1);
+ fmt.height = cxhdl->height;
+ fmt.code = V4L2_MBUS_FMT_FIXED;
+ v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
+ return 0;
}
-int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx)
{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
- struct v4l2_control ctrl;
-
- if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
- int i;
- int err = 0;
-
- for (i = 0; i < c->count; i++) {
- ctrl.id = c->controls[i].id;
- ctrl.value = c->controls[i].value;
- err = ivtv_s_ctrl(itv, &ctrl);
- c->controls[i].value = ctrl.value;
- if (err) {
- c->error_idx = i;
- break;
- }
- }
- return err;
- }
- if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
- static u32 freqs[3] = { 44100, 48000, 32000 };
- struct cx2341x_mpeg_params p = itv->params;
- int err = cx2341x_ext_ctrls(&p, atomic_read(&itv->capturing), c, VIDIOC_S_EXT_CTRLS);
- unsigned idx;
-
- if (err)
- return err;
+ static const u32 freqs[3] = { 44100, 48000, 32000 };
+ struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
- if (p.video_encoding != itv->params.video_encoding) {
- int is_mpeg1 = p.video_encoding ==
- V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
- struct v4l2_mbus_framefmt fmt;
-
- /* fix videodecoder resolution */
- fmt.width = itv->params.width / (is_mpeg1 ? 2 : 1);
- fmt.height = itv->params.height;
- fmt.code = V4L2_MBUS_FMT_FIXED;
- v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
- }
- err = cx2341x_update(itv, ivtv_api_func, &itv->params, &p);
- if (!err && itv->params.stream_vbi_fmt != p.stream_vbi_fmt)
- err = ivtv_setup_vbi_fmt(itv, p.stream_vbi_fmt);
- itv->params = p;
- itv->dualwatch_stereo_mode = p.audio_properties & 0x0300;
- idx = p.audio_properties & 0x03;
- /* The audio clock of the digitizer must match the codec sample
- rate otherwise you get some very strange effects. */
- if (idx < ARRAY_SIZE(freqs))
- ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
- return err;
- }
- return -EINVAL;
+ /* The audio clock of the digitizer must match the codec sample
+ rate otherwise you get some very strange effects. */
+ if (idx < ARRAY_SIZE(freqs))
+ ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
+ return 0;
}
-int ivtv_try_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
+static int ivtv_s_audio_mode(struct cx2341x_handler *cxhdl, u32 val)
{
- struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
+ struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl);
- if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
- int i;
- int err = 0;
-
- for (i = 0; i < c->count; i++) {
- err = ivtv_try_ctrl(file, fh, &c->controls[i]);
- if (err) {
- c->error_idx = i;
- break;
- }
- }
- return err;
- }
- if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
- return cx2341x_ext_ctrls(&itv->params, atomic_read(&itv->capturing), c, VIDIOC_TRY_EXT_CTRLS);
- return -EINVAL;
+ itv->dualwatch_stereo_mode = val;
+ return 0;
}
+
+struct cx2341x_handler_ops ivtv_cxhdl_ops = {
+ .s_audio_mode = ivtv_s_audio_mode,
+ .s_audio_sampling_freq = ivtv_s_audio_sampling_freq,
+ .s_video_encoding = ivtv_s_video_encoding,
+ .s_stream_vbi_fmt = ivtv_s_stream_vbi_fmt,
+};
diff --git a/drivers/media/video/ivtv/ivtv-controls.h b/drivers/media/video/ivtv/ivtv-controls.h
index 1c7721e23c9ba..d12893dd01838 100644
--- a/drivers/media/video/ivtv/ivtv-controls.h
+++ b/drivers/media/video/ivtv/ivtv-controls.h
@@ -21,10 +21,6 @@
#ifndef IVTV_CONTROLS_H
#define IVTV_CONTROLS_H
-int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *a);
-int ivtv_g_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_try_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a);
-int ivtv_querymenu(struct file *file, void *fh, struct v4l2_querymenu *a);
+extern struct cx2341x_handler_ops ivtv_cxhdl_ops;
#endif
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 53ea31aab155b..e421d15b0f5c4 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -53,6 +53,7 @@
#include "ivtv-cards.h"
#include "ivtv-vbi.h"
#include "ivtv-routing.h"
+#include "ivtv-controls.h"
#include "ivtv-gpio.h"
#include <media/tveeprom.h>
@@ -734,9 +735,8 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
itv->open_id = 1;
/* Initial settings */
- cx2341x_fill_defaults(&itv->params);
- itv->params.port = CX2341X_PORT_MEMORY;
- itv->params.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
+ itv->cxhdl.port = CX2341X_PORT_MEMORY;
+ itv->cxhdl.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
init_waitqueue_head(&itv->eos_waitq);
init_waitqueue_head(&itv->event_waitq);
init_waitqueue_head(&itv->vsync_waitq);
@@ -1006,6 +1006,13 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
retval = -ENOMEM;
goto err;
}
+ retval = cx2341x_handler_init(&itv->cxhdl, 50);
+ if (retval)
+ goto err;
+ itv->v4l2_dev.ctrl_handler = &itv->cxhdl.hdl;
+ itv->cxhdl.ops = &ivtv_cxhdl_ops;
+ itv->cxhdl.priv = itv;
+ itv->cxhdl.func = ivtv_api_func;
IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
@@ -1127,7 +1134,7 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w;
itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h;
- itv->params.video_gop_size = itv->is_60hz ? 15 : 12;
+ cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz);
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000;
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200;
@@ -1322,6 +1329,8 @@ int ivtv_init_on_first_open(struct ivtv *itv)
/* For cards with video out, this call needs interrupts enabled */
ivtv_s_std(NULL, &fh, &itv->tuner_std);
+ /* Setup initial controls */
+ cx2341x_handler_setup(&itv->cxhdl);
return 0;
}
@@ -1386,7 +1395,6 @@ static void ivtv_remove(struct pci_dev *pdev)
printk(KERN_INFO "ivtv: Removed %s\n", itv->card_name);
v4l2_device_unregister(&itv->v4l2_dev);
- v4l2_ctrl_handler_free(&itv->hdl_gpio);
kfree(itv);
}
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index d2260de4c8124..75803141481e3 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -62,6 +62,7 @@
#include <linux/dvb/audio.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fh.h>
#include <media/tuner.h>
@@ -631,8 +632,9 @@ struct ivtv {
struct ivtv_options options; /* user options */
struct v4l2_device v4l2_dev;
- struct v4l2_subdev sd_gpio; /* GPIO sub-device */
+ struct cx2341x_handler cxhdl;
struct v4l2_ctrl_handler hdl_gpio;
+ struct v4l2_subdev sd_gpio; /* GPIO sub-device */
u16 instance;
/* High-level state info */
@@ -649,7 +651,6 @@ struct ivtv {
v4l2_std_id std_out; /* current TV output standard */
u8 audio_stereo_mode; /* decoder setting how to handle stereo MPEG audio */
u8 audio_bilingual_mode; /* decoder setting how to handle bilingual MPEG audio */
- struct cx2341x_mpeg_params params; /* current encoder parameters */
/* Locking */
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index a6a2cdb81566f..d727485da886b 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -150,12 +150,10 @@ void ivtv_release_stream(struct ivtv_stream *s)
static void ivtv_dualwatch(struct ivtv *itv)
{
struct v4l2_tuner vt;
- u32 new_bitmap;
u32 new_stereo_mode;
- const u32 stereo_mask = 0x0300;
- const u32 dual = 0x0200;
+ const u32 dual = 0x02;
- new_stereo_mode = itv->params.audio_properties & stereo_mask;
+ new_stereo_mode = v4l2_ctrl_g_ctrl(itv->cxhdl.audio_mode);
memset(&vt, 0, sizeof(vt));
ivtv_call_all(itv, tuner, g_tuner, &vt);
if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 && (vt.rxsubchans & V4L2_TUNER_SUB_LANG2))
@@ -164,16 +162,10 @@ static void ivtv_dualwatch(struct ivtv *itv)
if (new_stereo_mode == itv->dualwatch_stereo_mode)
return;
- new_bitmap = new_stereo_mode | (itv->params.audio_properties & ~stereo_mask);
-
- IVTV_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. new audio_bitmask=0x%ux\n",
- itv->dualwatch_stereo_mode, new_stereo_mode, new_bitmap);
-
- if (ivtv_vapi(itv, CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, new_bitmap) == 0) {
- itv->dualwatch_stereo_mode = new_stereo_mode;
- return;
- }
- IVTV_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
+ IVTV_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x.\n",
+ itv->dualwatch_stereo_mode, new_stereo_mode);
+ if (v4l2_ctrl_s_ctrl(itv->cxhdl.audio_mode, new_stereo_mode))
+ IVTV_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
}
static void ivtv_update_pgm_info(struct ivtv *itv)
@@ -894,7 +886,8 @@ int ivtv_v4l2_close(struct file *filp)
if (atomic_read(&itv->capturing) > 0) {
/* Undo video mute */
ivtv_vapi(itv, CX2341X_ENC_MUTE_VIDEO, 1,
- itv->params.video_mute | (itv->params.video_mute_yuv << 8));
+ v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute) |
+ (v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute_yuv) << 8));
}
/* Done! Unmute and continue. */
ivtv_unmute(itv);
diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c
index d8bf2b01729dc..4df01947a7df0 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.c
+++ b/drivers/media/video/ivtv/ivtv-firmware.c
@@ -248,9 +248,9 @@ void ivtv_init_mpeg_decoder(struct ivtv *itv)
volatile u8 __iomem *mem_offset;
data[0] = 0;
- data[1] = itv->params.width; /* YUV source width */
- data[2] = itv->params.height;
- data[3] = itv->params.audio_properties; /* Audio settings to use,
+ data[1] = itv->cxhdl.width; /* YUV source width */
+ data[2] = itv->cxhdl.height;
+ data[3] = itv->cxhdl.audio_properties; /* Audio settings to use,
bitmap. see docs. */
if (ivtv_api(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, data)) {
IVTV_ERR("ivtv_init_mpeg_decoder failed to set decoder source\n");
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 11ac2fa33ef71..4eed9123683e6 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -162,7 +162,7 @@ int ivtv_set_speed(struct ivtv *itv, int speed)
data[0] |= (speed > 1000 || speed < -1500) ? 0x40000000 : 0;
data[1] = (speed < 0);
data[2] = speed < 0 ? 3 : 7;
- data[3] = itv->params.video_b_frames;
+ data[3] = v4l2_ctrl_g_ctrl(itv->cxhdl.video_b_frames);
data[4] = (speed == 1500 || speed == 500) ? itv->speed_mute_audio : 0;
data[5] = 0;
data[6] = 0;
@@ -339,8 +339,8 @@ static int ivtv_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f
struct ivtv *itv = id->itv;
struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
- pixfmt->width = itv->params.width;
- pixfmt->height = itv->params.height;
+ pixfmt->width = itv->cxhdl.width;
+ pixfmt->height = itv->cxhdl.height;
pixfmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
pixfmt->field = V4L2_FIELD_INTERLACED;
pixfmt->priv = 0;
@@ -568,7 +568,6 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f
{
struct ivtv_open_id *id = fh;
struct ivtv *itv = id->itv;
- struct cx2341x_mpeg_params *p = &itv->params;
struct v4l2_mbus_framefmt mbus_fmt;
int ret = ivtv_try_fmt_vid_cap(file, fh, fmt);
int w = fmt->fmt.pix.width;
@@ -577,15 +576,15 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f
if (ret)
return ret;
- if (p->width == w && p->height == h)
+ if (itv->cxhdl.width == w && itv->cxhdl.height == h)
return 0;
if (atomic_read(&itv->capturing) > 0)
return -EBUSY;
- p->width = w;
- p->height = h;
- if (p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
+ itv->cxhdl.width = w;
+ itv->cxhdl.height = h;
+ if (v4l2_ctrl_g_ctrl(itv->cxhdl.video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
fmt->fmt.pix.width /= 2;
mbus_fmt.width = fmt->fmt.pix.width;
mbus_fmt.height = h;
@@ -1114,9 +1113,10 @@ int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
itv->std = *std;
itv->is_60hz = (*std & V4L2_STD_525_60) ? 1 : 0;
- itv->params.is_50hz = itv->is_50hz = !itv->is_60hz;
- itv->params.width = 720;
- itv->params.height = itv->is_50hz ? 576 : 480;
+ itv->is_50hz = !itv->is_60hz;
+ cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz);
+ itv->cxhdl.width = 720;
+ itv->cxhdl.height = itv->is_50hz ? 576 : 480;
itv->vbi.count = itv->is_50hz ? 18 : 12;
itv->vbi.start[0] = itv->is_50hz ? 6 : 10;
itv->vbi.start[1] = itv->is_50hz ? 318 : 273;
@@ -1157,7 +1157,7 @@ int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
ivtv_vapi(itv, CX2341X_DEC_SET_STANDARD, 1, itv->is_out_50hz);
itv->main_rect.left = itv->main_rect.top = 0;
itv->main_rect.width = 720;
- itv->main_rect.height = itv->params.height;
+ itv->main_rect.height = itv->cxhdl.height;
ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4,
720, itv->main_rect.height, 0, 0);
yi->main_rect = itv->main_rect;
@@ -1554,7 +1554,7 @@ static int ivtv_log_status(struct file *file, void *fh)
}
IVTV_INFO("Tuner: %s\n",
test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ? "Radio" : "TV");
- cx2341x_log_status(&itv->params, itv->v4l2_dev.name);
+ v4l2_ctrl_handler_log_status(&itv->cxhdl.hdl, itv->v4l2_dev.name);
IVTV_INFO("Status flags: 0x%08lx\n", itv->i_flags);
for (i = 0; i < IVTV_MAX_STREAMS; i++) {
struct ivtv_stream *s = &itv->streams[i];
@@ -1942,11 +1942,6 @@ static const struct v4l2_ioctl_ops ivtv_ioctl_ops = {
.vidioc_s_register = ivtv_s_register,
#endif
.vidioc_default = ivtv_default,
- .vidioc_queryctrl = ivtv_queryctrl,
- .vidioc_querymenu = ivtv_querymenu,
- .vidioc_g_ext_ctrls = ivtv_g_ext_ctrls,
- .vidioc_s_ext_ctrls = ivtv_s_ext_ctrls,
- .vidioc_try_ext_ctrls = ivtv_try_ext_ctrls,
.vidioc_subscribe_event = ivtv_subscribe_event,
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
};
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 55df4190c28d0..512607e0cda36 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -210,6 +210,7 @@ static int ivtv_prep_dev(struct ivtv *itv, int type)
s->vdev->num = num;
s->vdev->v4l2_dev = &itv->v4l2_dev;
+ s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler;
s->vdev->fops = ivtv_stream_info[type].fops;
s->vdev->release = video_device_release;
s->vdev->tvnorms = V4L2_STD_ALL;
@@ -451,7 +452,6 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
{
u32 data[CX2341X_MBOX_MAX_DATA];
struct ivtv *itv = s->itv;
- struct cx2341x_mpeg_params *p = &itv->params;
int captype = 0, subtype = 0;
int enable_passthrough = 0;
@@ -472,7 +472,7 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
}
itv->mpg_data_received = itv->vbi_data_inserted = 0;
itv->dualwatch_jiffies = jiffies;
- itv->dualwatch_stereo_mode = p->audio_properties & 0x0300;
+ itv->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(itv->cxhdl.audio_mode);
itv->search_pack_header = 0;
break;
@@ -560,12 +560,12 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
itv->pgm_info_offset, itv->pgm_info_num);
/* Setup API for Stream */
- cx2341x_update(itv, ivtv_api_func, NULL, p);
+ cx2341x_handler_setup(&itv->cxhdl);
/* mute if capturing radio */
if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags))
ivtv_vapi(itv, CX2341X_ENC_MUTE_VIDEO, 1,
- 1 | (p->video_mute_yuv << 8));
+ 1 | (v4l2_ctrl_g_ctrl(itv->cxhdl.video_mute_yuv) << 8));
}
/* Vsync Setup */
@@ -581,6 +581,8 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s)
clear_bit(IVTV_F_I_EOS, &itv->i_flags);
+ cx2341x_handler_set_busy(&itv->cxhdl, 1);
+
/* Initialize Digitizer for Capture */
/* Avoid tinny audio problem - ensure audio clocks are going */
v4l2_subdev_call(itv->sd_audio, audio, s_stream, 1);
@@ -617,7 +619,6 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
{
u32 data[CX2341X_MBOX_MAX_DATA];
struct ivtv *itv = s->itv;
- struct cx2341x_mpeg_params *p = &itv->params;
int datatype;
u16 width;
u16 height;
@@ -627,8 +628,8 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
IVTV_DEBUG_INFO("Setting some initial decoder settings\n");
- width = p->width;
- height = p->height;
+ width = itv->cxhdl.width;
+ height = itv->cxhdl.height;
/* set audio mode to left/stereo for dual/stereo mode. */
ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
@@ -668,7 +669,7 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s)
break;
}
if (ivtv_vapi(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, datatype,
- width, height, p->audio_properties)) {
+ width, height, itv->cxhdl.audio_properties)) {
IVTV_DEBUG_WARN("Couldn't initialize decoder source\n");
}
@@ -847,6 +848,8 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
return 0;
}
+ cx2341x_handler_set_busy(&itv->cxhdl, 0);
+
/* Set the following Interrupt mask bits for capture */
ivtv_set_irq_mask(itv, IVTV_IRQ_MASK_CAPTURE);
del_timer(&itv->dma_timer);
@@ -967,7 +970,8 @@ int ivtv_passthrough_mode(struct ivtv *itv, int enable)
/* Setup capture if not already done */
if (atomic_read(&itv->capturing) == 0) {
- cx2341x_update(itv, ivtv_api_func, NULL, &itv->params);
+ cx2341x_handler_setup(&itv->cxhdl);
+ cx2341x_handler_set_busy(&itv->cxhdl, 1);
}
/* Start Passthrough Mode */
@@ -988,6 +992,8 @@ int ivtv_passthrough_mode(struct ivtv *itv, int enable)
clear_bit(IVTV_F_S_PASSTHROUGH, &dec_stream->s_flags);
clear_bit(IVTV_F_S_STREAMING, &dec_stream->s_flags);
itv->output_mode = OUT_NONE;
+ if (atomic_read(&itv->capturing) == 0)
+ cx2341x_handler_set_busy(&itv->cxhdl, 0);
return 0;
}
--
GitLab
From ede67a30f549e1872be57e7d6f5f9dd97bb372ae Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Fri, 6 Aug 2010 03:31:00 -0300
Subject: [PATCH 515/863] V4L/DVB: media: ir-keytable: null dereference in
debug code
"ir_dev->props" can be NULL. We only use raw mode if "ir_dev->props" is
non-NULL and "ir_dev->props->driver_type == RC_DRIVER_IR_RAW".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/IR/ir-keytable.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 7032ea047f8a7..7e82a9df726b5 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -507,7 +507,8 @@ int __ir_input_register(struct input_dev *input_dev,
IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
driver_name, rc_tab->name,
- ir_dev->props->driver_type == RC_DRIVER_IR_RAW ? " in raw mode" : "");
+ (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
+ " in raw mode" : "");
return 0;
--
GitLab
From c75079cc2addedf958358b88306591a5f9c4fb00 Mon Sep 17 00:00:00 2001
From: Arnuschky <arnuschky@xylon.de>
Date: Tue, 27 Jul 2010 05:48:08 -0300
Subject: [PATCH 516/863] V4L/DVB: Report supported QAM modes on bt8xx
Here a small patch to get a TwinHan VT DST DVB-T card working with
kernels >= 2.6.32. Analogously to
http://linuxtv.org/hg/v4l-dvb/rev/0e735b509163 I had to:
"Fill in the .caps field in struct dst_dvbt_ops (around line 1763) with
all the supported QAM modulation methods to match the capabilities of
the card as implemented in function dst_set_modulation (around line
502). Note that beginning with linux kernel version 2.6.32 the
modulation method is checked (by function dvb_frontend_check_parameters
in file drivers/media/dvb/dvb-core/dvb_frontend.c) and thus tuning fails
if you use a modulation method that is not present in the .caps field."
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/dvb/bt8xx/dst.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 248a2a9d84164..caa4e18ed1c18 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1763,7 +1763,15 @@ static struct dvb_frontend_ops dst_dvbt_ops = {
.frequency_min = 137000000,
.frequency_max = 858000000,
.frequency_stepsize = 166667,
- .caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
+ .caps = FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256 |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO
},
.release = dst_release,
--
GitLab
From af5458b91f99ce5a29f670379a6d7a9e69014def Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andy.shevchenko@gmail.com>
Date: Tue, 27 Jul 2010 09:32:49 -0300
Subject: [PATCH 517/863] V4L/DVB: drivers: usbvideo: remove custom
implementation of hex_to_bin()
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/usbvideo/usbvideo.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
index 5ac37c6c43131..f1fcf9744961f 100644
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ b/drivers/media/video/usbvideo/usbvideo.c
@@ -282,19 +282,15 @@ static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame,
};
unsigned short digit;
int ix, iy;
+ int value;
if ((uvd == NULL) || (frame == NULL))
return;
- if (ch >= '0' && ch <= '9')
- ch -= '0';
- else if (ch >= 'A' && ch <= 'F')
- ch = 10 + (ch - 'A');
- else if (ch >= 'a' && ch <= 'f')
- ch = 10 + (ch - 'a');
- else
+ value = hex_to_bin(ch);
+ if (value < 0)
return;
- digit = digits[ch];
+ digit = digits[value];
for (iy=0; iy < 5; iy++) {
for (ix=0; ix < 3; ix++) {
--
GitLab
From e03b9843dc30ba44dedffdfa4180f0723f04e3ab Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andy.shevchenko@gmail.com>
Date: Tue, 27 Jul 2010 09:32:50 -0300
Subject: [PATCH 518/863] V4L/DVB: media: video: pvrusb2: remove custom
hex_to_bin()
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/pvrusb2/pvrusb2-debugifc.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
index e9b11e119f629..4279ebb811a11 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
@@ -94,8 +94,6 @@ static int debugifc_parse_unsigned_number(const char *buf,unsigned int count,
u32 *num_ptr)
{
u32 result = 0;
- u32 val;
- int ch;
int radix = 10;
if ((count >= 2) && (buf[0] == '0') &&
((buf[1] == 'x') || (buf[1] == 'X'))) {
@@ -107,17 +105,9 @@ static int debugifc_parse_unsigned_number(const char *buf,unsigned int count,
}
while (count--) {
- ch = *buf++;
- if ((ch >= '0') && (ch <= '9')) {
- val = ch - '0';
- } else if ((ch >= 'a') && (ch <= 'f')) {
- val = ch - 'a' + 10;
- } else if ((ch >= 'A') && (ch <= 'F')) {
- val = ch - 'A' + 10;
- } else {
+ int val = hex_to_bin(*buf++);
+ if (val < 0 || val >= radix)
return -EINVAL;
- }
- if (val >= radix) return -EINVAL;
result *= radix;
result += val;
}
--
GitLab
From d0a38ce27e1b11116f02835b076fcb79db987e2c Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Tue, 27 Jul 2010 15:42:40 -0300
Subject: [PATCH 519/863] V4L/DVB: dvb: siano: free spinlock before schedule()
Calling schedule() holding spinlock with disables irqs is improper. As
spinlock protects list coredev->buffers, it can be unlocked untill wakeup.
This bug was introduced in a9349315f65cd6a16e8fab1f6cf0fd40f379c4db.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/dvb/siano/smscoreapi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 7f2c94a15ab14..d93468cd3a85e 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1113,9 +1113,11 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
*/
prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
-
- if (list_empty(&coredev->buffers))
+ if (list_empty(&coredev->buffers)) {
+ spin_unlock_irqrestore(&coredev->bufferslock, flags);
schedule();
+ spin_lock_irqsave(&coredev->bufferslock, flags);
+ }
finish_wait(&coredev->buffer_mng_waitq, &wait);
--
GitLab
From 560afa7d85bdfb294506afd3032c315e6827824f Mon Sep 17 00:00:00 2001
From: "Rajashekhara, Sudhakar" <sudhakar.raj@ti.com>
Date: Wed, 28 Jul 2010 05:47:48 -0300
Subject: [PATCH 520/863] V4L/DVB: tvp7002: fix write to H-PLL Feedback Divider
LSB register
H-PLL Feedback Divider LSB register is an 8 bit register out
of which the first 4 bits are reserved. Current code is
writing to these reserved location. This patch corrects
this issue by left shifting the values being written to the
register by 4.
This patch has been tested on DM6467 EVM with 720P-60 and
1080I-60 inputs.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
drivers/media/video/tvp7002.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c
index 8085ac392446e..48f5c76ab5210 100644
--- a/drivers/media/video/tvp7002.c
+++ b/drivers/media/video/tvp7002.c
@@ -179,7 +179,7 @@ static const struct i2c_reg_value tvp7002_init_default[] = {
/* Register parameters for 480P */
static const struct i2c_reg_value tvp7002_parms_480P[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0a, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0xa0, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE },
@@ -223,7 +223,7 @@ static const struct i2c_reg_value tvp7002_parms_576P[] = {
/* Register parameters for 1080I60 */
static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
@@ -245,7 +245,7 @@ static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
/* Register parameters for 1080P60 */
static const struct i2c_reg_value tvp7002_parms_1080P60[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x08, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
@@ -289,7 +289,7 @@ static const struct i2c_reg_value tvp7002_parms_1080I50[] = {
/* Register parameters for 720P60 */
static const struct i2c_reg_value tvp7002_parms_720P60[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x02, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
@@ -311,7 +311,7 @@ static const struct i2c_reg_value tvp7002_parms_720P60[] = {
/* Register parameters for 720P50 */
static const struct i2c_reg_value tvp7002_parms_720P50[] = {
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE },
- { TVP7002_HPLL_FDBK_DIV_LSBS, 0x0c, TVP7002_WRITE },
+ { TVP7002_HPLL_FDBK_DIV_LSBS, 0xc0, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
{ TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
--
GitLab
From a1275c3b21e433888994f7b979cd1129d384ec9c Mon Sep 17 00:00:00 2001
From: Prarit Bhargava <prarit@redhat.com>
Date: Thu, 27 May 2010 11:19:30 -0400
Subject: [PATCH 521/863] ecryptfs: Fix warning in ecryptfs_process_response()
Fix warning seen with "make -j24 CONFIG_DEBUG_SECTION_MISMATCH=y V=1":
fs/ecryptfs/messaging.c: In function 'ecryptfs_process_response':
fs/ecryptfs/messaging.c:276: warning: 'daemon' may be used uninitialized in this function
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
fs/ecryptfs/messaging.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c
index 46c4dd8dfcc37..bcb68c0cb1f0f 100644
--- a/fs/ecryptfs/messaging.c
+++ b/fs/ecryptfs/messaging.c
@@ -274,7 +274,7 @@ int ecryptfs_process_response(struct ecryptfs_message *msg, uid_t euid,
struct user_namespace *user_ns, struct pid *pid,
u32 seq)
{
- struct ecryptfs_daemon *daemon;
+ struct ecryptfs_daemon *uninitialized_var(daemon);
struct ecryptfs_msg_ctx *msg_ctx;
size_t msg_size;
struct nsproxy *nsproxy;
--
GitLab
From c43f7b8fb03be8bcc579bfc4e6ab70eac887ab55 Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Tue, 3 Nov 2009 11:45:11 -0600
Subject: [PATCH 522/863] eCryptfs: Handle ioctl calls with unlocked and compat
functions
Lower filesystems that only implemented unlocked_ioctl weren't being
passed ioctl calls because eCryptfs only checked for
lower_file->f_op->ioctl and returned -ENOTTY if it was NULL.
eCryptfs shouldn't implement ioctl(), since it doesn't require the BKL.
This patch introduces ecryptfs_unlocked_ioctl() and
ecryptfs_compat_ioctl(), which passes the calls on to the lower file
system.
https://bugs.launchpad.net/ecryptfs/+bug/469664
Reported-by: James Dupin <james.dupin@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
fs/ecryptfs/file.c | 56 +++++++++++++++++++++++++++++-----------------
1 file changed, 35 insertions(+), 21 deletions(-)
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index e8fcf4e2ed7d1..6e4f84cf73e8d 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -292,12 +292,40 @@ static int ecryptfs_fasync(int fd, struct file *file, int flag)
return rc;
}
-static int ecryptfs_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
+static long
+ecryptfs_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct file *lower_file = NULL;
+ long rc = -ENOTTY;
+
+ if (ecryptfs_file_to_private(file))
+ lower_file = ecryptfs_file_to_lower(file);
+ if (lower_file && lower_file->f_op && lower_file->f_op->unlocked_ioctl)
+ rc = lower_file->f_op->unlocked_ioctl(lower_file, cmd, arg);
+ return rc;
+}
+
+#ifdef CONFIG_COMPAT
+static long
+ecryptfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct file *lower_file = NULL;
+ long rc = -ENOIOCTLCMD;
+
+ if (ecryptfs_file_to_private(file))
+ lower_file = ecryptfs_file_to_lower(file);
+ if (lower_file && lower_file->f_op && lower_file->f_op->compat_ioctl)
+ rc = lower_file->f_op->compat_ioctl(lower_file, cmd, arg);
+ return rc;
+}
+#endif
const struct file_operations ecryptfs_dir_fops = {
.readdir = ecryptfs_readdir,
- .ioctl = ecryptfs_ioctl,
+ .unlocked_ioctl = ecryptfs_unlocked_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = ecryptfs_compat_ioctl,
+#endif
.open = ecryptfs_open,
.flush = ecryptfs_flush,
.release = ecryptfs_release,
@@ -313,7 +341,10 @@ const struct file_operations ecryptfs_main_fops = {
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.readdir = ecryptfs_readdir,
- .ioctl = ecryptfs_ioctl,
+ .unlocked_ioctl = ecryptfs_unlocked_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = ecryptfs_compat_ioctl,
+#endif
.mmap = generic_file_mmap,
.open = ecryptfs_open,
.flush = ecryptfs_flush,
@@ -322,20 +353,3 @@ const struct file_operations ecryptfs_main_fops = {
.fasync = ecryptfs_fasync,
.splice_read = generic_file_splice_read,
};
-
-static int
-ecryptfs_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int rc = 0;
- struct file *lower_file = NULL;
-
- if (ecryptfs_file_to_private(file))
- lower_file = ecryptfs_file_to_lower(file);
- if (lower_file && lower_file->f_op && lower_file->f_op->ioctl)
- rc = lower_file->f_op->ioctl(ecryptfs_inode_to_lower(inode),
- lower_file, cmd, arg);
- else
- rc = -ENOTTY;
- return rc;
-}
--
GitLab
From 31f73bee3e170b7cabb35db9e2f4bf7919b9d036 Mon Sep 17 00:00:00 2001
From: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Date: Thu, 29 Jul 2010 13:01:36 +0200
Subject: [PATCH 523/863] ecryptfs: release reference to lower mount if
interpose fails
In ecryptfs_lookup_and_interpose_lower() the lower mount is not decremented
if allocation of a dentry info struct failed. As a result the lower filesystem
cant be unmounted any more (since it is considered busy). This patch corrects
the reference counting.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: stable@kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
fs/ecryptfs/inode.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 31ef5252f0fe2..8cd617b66baa0 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -264,7 +264,7 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
printk(KERN_ERR "%s: Out of memory whilst attempting "
"to allocate ecryptfs_dentry_info struct\n",
__func__);
- goto out_dput;
+ goto out_put;
}
ecryptfs_set_dentry_lower(ecryptfs_dentry, lower_dentry);
ecryptfs_set_dentry_lower_mnt(ecryptfs_dentry, lower_mnt);
@@ -339,8 +339,9 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
out_free_kmem:
kmem_cache_free(ecryptfs_header_cache_2, page_virt);
goto out;
-out_dput:
+out_put:
dput(lower_dentry);
+ mntput(lower_mnt);
d_drop(ecryptfs_dentry);
out:
return rc;
--
GitLab
From fd0457a6ae52141718a15652fb80d867e1bf1d10 Mon Sep 17 00:00:00 2001
From: Michael Ernst <mernst@de.ibm.com>
Date: Mon, 9 Aug 2010 18:12:50 +0200
Subject: [PATCH 524/863] [S390] cio: CHSC SIOSL Support
A Linux interface for the CHSC command
store-I/O-operation-status-and-initiate-logging (SIOSL).
Model-dependent logging within the channel subsystem can be invoked
via a helper function or a writable subchannel device attribute.
Signed-off-by: Michael Ernst <mernst@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
arch/s390/include/asm/ccwdev.h | 2 ++
drivers/s390/cio/chsc.c | 48 ++++++++++++++++++++++++++++++++++
drivers/s390/cio/chsc.h | 2 ++
drivers/s390/cio/device.c | 37 ++++++++++++++++++++++++++
4 files changed, 89 insertions(+)
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index 1c0030f9b890b..f3ba0fa98de6c 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -208,6 +208,8 @@ extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
extern struct ccw_device *ccw_device_probe_console(void);
extern int ccw_device_force_console(void);
+int ccw_device_siosl(struct ccw_device *);
+
// FIXME: these have to go
extern int _ccw_device_get_subchannel_number(struct ccw_device *);
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 407d0e9adfaf9..4cbb1a6ca33c8 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -29,6 +29,7 @@
#include "chsc.h"
static void *sei_page;
+static DEFINE_SPINLOCK(siosl_lock);
static DEFINE_SPINLOCK(sda_lock);
/**
@@ -48,6 +49,7 @@ int chsc_error_from_response(int response)
case 0x0007:
case 0x0008:
case 0x000a:
+ case 0x0104:
return -EINVAL;
case 0x0004:
return -EOPNOTSUPP;
@@ -974,3 +976,49 @@ int chsc_sstpi(void *page, void *result, size_t size)
return (rr->response.code == 0x0001) ? 0 : -EIO;
}
+static struct {
+ struct chsc_header request;
+ u32 word1;
+ struct subchannel_id sid;
+ u32 word3;
+ struct chsc_header response;
+ u32 word[11];
+} __attribute__ ((packed)) siosl_area __attribute__ ((__aligned__(PAGE_SIZE)));
+
+int chsc_siosl(struct subchannel_id schid)
+{
+ unsigned long flags;
+ int ccode;
+ int rc;
+
+ spin_lock_irqsave(&siosl_lock, flags);
+ memset(&siosl_area, 0, sizeof(siosl_area));
+ siosl_area.request.length = 0x0010;
+ siosl_area.request.code = 0x0046;
+ siosl_area.word1 = 0x80000000;
+ siosl_area.sid = schid;
+
+ ccode = chsc(&siosl_area);
+ if (ccode > 0) {
+ if (ccode == 3)
+ rc = -ENODEV;
+ else
+ rc = -EBUSY;
+ CIO_MSG_EVENT(2, "chsc: chsc failed for 0.%x.%04x (ccode=%d)\n",
+ schid.ssid, schid.sch_no, ccode);
+ goto out;
+ }
+ rc = chsc_error_from_response(siosl_area.response.code);
+ if (rc)
+ CIO_MSG_EVENT(2, "chsc: siosl failed for 0.%x.%04x (rc=%04x)\n",
+ schid.ssid, schid.sch_no,
+ siosl_area.response.code);
+ else
+ CIO_MSG_EVENT(4, "chsc: siosl succeeded for 0.%x.%04x\n",
+ schid.ssid, schid.sch_no);
+out:
+ spin_unlock_irqrestore(&siosl_lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(chsc_siosl);
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 37aa611d4ac5b..5453013f094b3 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -80,4 +80,6 @@ int chsc_get_channel_measurement_chars(struct channel_path *chp);
int chsc_error_from_response(int response);
+int chsc_siosl(struct subchannel_id schid);
+
#endif
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 6d229f3523a0f..75acec3b2d6b6 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -36,6 +36,7 @@
#include "ioasm.h"
#include "io_sch.h"
#include "blacklist.h"
+#include "chsc.h"
static struct timer_list recovery_timer;
static DEFINE_SPINLOCK(recovery_lock);
@@ -598,6 +599,25 @@ available_show (struct device *dev, struct device_attribute *attr, char *buf)
}
}
+static ssize_t
+initiate_logging(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct subchannel *sch = to_subchannel(dev);
+ int rc;
+
+ rc = chsc_siosl(sch->schid);
+ if (rc < 0) {
+ pr_warning("Logging for subchannel 0.%x.%04x failed with "
+ "errno=%d\n",
+ sch->schid.ssid, sch->schid.sch_no, rc);
+ return rc;
+ }
+ pr_notice("Logging for subchannel 0.%x.%04x was triggered\n",
+ sch->schid.ssid, sch->schid.sch_no);
+ return count;
+}
+
static DEVICE_ATTR(chpids, 0444, chpids_show, NULL);
static DEVICE_ATTR(pimpampom, 0444, pimpampom_show, NULL);
static DEVICE_ATTR(devtype, 0444, devtype_show, NULL);
@@ -605,10 +625,12 @@ static DEVICE_ATTR(cutype, 0444, cutype_show, NULL);
static DEVICE_ATTR(modalias, 0444, modalias_show, NULL);
static DEVICE_ATTR(online, 0644, online_show, online_store);
static DEVICE_ATTR(availability, 0444, available_show, NULL);
+static DEVICE_ATTR(logging, 0200, NULL, initiate_logging);
static struct attribute *io_subchannel_attrs[] = {
&dev_attr_chpids.attr,
&dev_attr_pimpampom.attr,
+ &dev_attr_logging.attr,
NULL,
};
@@ -2036,6 +2058,21 @@ void ccw_device_sched_todo(struct ccw_device *cdev, enum cdev_todo todo)
}
}
+/**
+ * ccw_device_siosl() - initiate logging
+ * @cdev: ccw device
+ *
+ * This function is used to invoke model-dependent logging within the channel
+ * subsystem.
+ */
+int ccw_device_siosl(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+ return chsc_siosl(sch->schid);
+}
+EXPORT_SYMBOL_GPL(ccw_device_siosl);
+
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(ccw_device_set_online);
EXPORT_SYMBOL(ccw_device_set_offline);
--
GitLab
From dbedd0ee47313f2a3c94b19346785fcdfa721390 Mon Sep 17 00:00:00 2001
From: Michael Ernst <mernst@de.ibm.com>
Date: Mon, 9 Aug 2010 18:12:51 +0200
Subject: [PATCH 525/863] [S390] cio: Log the response from the unit check
handler
Log the response from the unit check handler which triggers further
cio internal i/o processing.
Signed-off-by: Michael Ernst <mernst@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
drivers/s390/cio/ccwreq.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/s390/cio/ccwreq.c b/drivers/s390/cio/ccwreq.c
index 7f206ed44fdf7..fd0368785ee0f 100644
--- a/drivers/s390/cio/ccwreq.c
+++ b/drivers/s390/cio/ccwreq.c
@@ -182,6 +182,8 @@ static enum io_status ccwreq_status(struct ccw_device *cdev, struct irb *lcirb)
/* Ask the driver what to do */
if (cdev->drv && cdev->drv->uc_handler) {
todo = cdev->drv->uc_handler(cdev, lcirb);
+ CIO_TRACE_EVENT(2, "uc_response");
+ CIO_HEX_EVENT(2, &todo, sizeof(todo));
switch (todo) {
case UC_TODO_RETRY:
return IO_STATUS_ERROR;
--
GitLab
From 7cd403142d5dbffa354b7dd369b1069e01b1ae19 Mon Sep 17 00:00:00 2001
From: Sebastian Ott <sebott@linux.vnet.ibm.com>
Date: Mon, 9 Aug 2010 18:12:52 +0200
Subject: [PATCH 526/863] [S390] cio: ccw_device_online_store return -EINVAL in
case of missing driver
If no driver is attached to a device or the driver provides no
set_online/set_offline function, setting this device online/offline
via its sysfs online attribute will silently fail but return success.
This patch changes the behavior to return -EINVAL in those cases.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
drivers/s390/cio/device.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 75acec3b2d6b6..51bd3687d163f 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -487,9 +487,11 @@ static int online_store_handle_offline(struct ccw_device *cdev)
spin_lock_irq(cdev->ccwlock);
ccw_device_sched_todo(cdev, CDEV_TODO_UNREG_EVAL);
spin_unlock_irq(cdev->ccwlock);
- } else if (cdev->online && cdev->drv && cdev->drv->set_offline)
+ return 0;
+ }
+ if (cdev->drv && cdev->drv->set_offline)
return ccw_device_set_offline(cdev);
- return 0;
+ return -EINVAL;
}
static int online_store_recog_and_online(struct ccw_device *cdev)
@@ -506,8 +508,8 @@ static int online_store_recog_and_online(struct ccw_device *cdev)
return -EAGAIN;
}
if (cdev->drv && cdev->drv->set_online)
- ccw_device_set_online(cdev);
- return 0;
+ return ccw_device_set_online(cdev);
+ return -EINVAL;
}
static int online_store_handle_online(struct ccw_device *cdev, int force)
--
GitLab
From 982bdf814616bec77c920e16ea4108d409f144ed Mon Sep 17 00:00:00 2001
From: Sebastian Ott <sebott@linux.vnet.ibm.com>
Date: Mon, 9 Aug 2010 18:12:53 +0200
Subject: [PATCH 527/863] [S390] ccwreq: add ability to use all paths
Change the ccwrequest infrastructure to use more than one channel
path per start I/O. A flag "singlepath" is added to struct
ccw_request - if set, the old behavior is used. This flag is set
for all exploiters of the ccwrequest infrastructure - so there
is no functional change through this patch.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
drivers/s390/cio/ccwreq.c | 14 +++++++++++---
drivers/s390/cio/device_id.c | 1 +
drivers/s390/cio/device_pgid.c | 4 ++++
drivers/s390/cio/io_sch.h | 10 ++++++----
4 files changed, 22 insertions(+), 7 deletions(-)
diff --git a/drivers/s390/cio/ccwreq.c b/drivers/s390/cio/ccwreq.c
index fd0368785ee0f..d15f8b4d78bd5 100644
--- a/drivers/s390/cio/ccwreq.c
+++ b/drivers/s390/cio/ccwreq.c
@@ -38,9 +38,13 @@ static u16 ccwreq_next_path(struct ccw_device *cdev)
{
struct ccw_request *req = &cdev->private->req;
+ if (!req->singlepath) {
+ req->mask = 0;
+ goto out;
+ }
req->retries = req->maxretries;
req->mask = lpm_adjust(req->mask >>= 1, req->lpm);
-
+out:
return req->mask;
}
@@ -113,8 +117,12 @@ void ccw_request_start(struct ccw_device *cdev)
{
struct ccw_request *req = &cdev->private->req;
- /* Try all paths twice to counter link flapping. */
- req->mask = 0x8080;
+ if (req->singlepath) {
+ /* Try all paths twice to counter link flapping. */
+ req->mask = 0x8080;
+ } else
+ req->mask = req->lpm;
+
req->retries = req->maxretries;
req->mask = lpm_adjust(req->mask, req->lpm);
req->drc = 0;
diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c
index 78a0b43862c5f..0d7fe4dab3b6b 100644
--- a/drivers/s390/cio/device_id.c
+++ b/drivers/s390/cio/device_id.c
@@ -216,6 +216,7 @@ void ccw_device_sense_id_start(struct ccw_device *cdev)
req->timeout = SENSE_ID_TIMEOUT;
req->maxretries = SENSE_ID_RETRIES;
req->lpm = sch->schib.pmcw.pam & sch->opm;
+ req->singlepath = 1;
req->check = snsid_check;
req->callback = snsid_callback;
ccw_request_start(cdev);
diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c
index 6facb5499a652..f1fdf0ec7f030 100644
--- a/drivers/s390/cio/device_pgid.c
+++ b/drivers/s390/cio/device_pgid.c
@@ -208,6 +208,7 @@ static void spid_start(struct ccw_device *cdev)
req->timeout = PGID_TIMEOUT;
req->maxretries = PGID_RETRIES;
req->lpm = 0x80;
+ req->singlepath = 1;
req->callback = spid_callback;
spid_do(cdev);
}
@@ -420,6 +421,7 @@ static void verify_start(struct ccw_device *cdev)
req->timeout = PGID_TIMEOUT;
req->maxretries = PGID_RETRIES;
req->lpm = 0x80;
+ req->singlepath = 1;
if (cdev->private->flags.pgroup) {
CIO_TRACE_EVENT(4, "snid");
CIO_HEX_EVENT(4, devid, sizeof(*devid));
@@ -507,6 +509,7 @@ void ccw_device_disband_start(struct ccw_device *cdev)
req->timeout = PGID_TIMEOUT;
req->maxretries = PGID_RETRIES;
req->lpm = sch->schib.pmcw.pam & sch->opm;
+ req->singlepath = 1;
req->callback = disband_callback;
fn = SPID_FUNC_DISBAND;
if (cdev->private->flags.mpath)
@@ -560,6 +563,7 @@ void ccw_device_stlck_start(struct ccw_device *cdev, void *data, void *buf1,
req->timeout = PGID_TIMEOUT;
req->maxretries = PGID_RETRIES;
req->lpm = sch->schib.pmcw.pam & sch->opm;
+ req->singlepath = 1;
req->data = data;
req->callback = stlck_callback;
stlck_build_cp(cdev, buf1, buf2);
diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h
index b9ce712a7f258..469ef93f23021 100644
--- a/drivers/s390/cio/io_sch.h
+++ b/drivers/s390/cio/io_sch.h
@@ -92,11 +92,12 @@ enum io_status {
* @filter: optional callback to adjust request status based on IRB data
* @callback: final callback
* @data: user-defined pointer passed to all callbacks
+ * @singlepath: if set, use only one path from @lpm per start I/O
+ * @cancel: non-zero if request was cancelled
+ * @done: non-zero if request was finished
* @mask: current path mask
* @retries: current number of retries
* @drc: delayed return code
- * @cancel: non-zero if request was cancelled
- * @done: non-zero if request was finished
*/
struct ccw_request {
struct ccw1 *cp;
@@ -108,12 +109,13 @@ struct ccw_request {
enum io_status);
void (*callback)(struct ccw_device *, void *, int);
void *data;
+ unsigned int singlepath:1;
/* These fields are used internally. */
+ unsigned int cancel:1;
+ unsigned int done:1;
u16 mask;
u16 retries;
int drc;
- int cancel:1;
- int done:1;
} __attribute__((packed));
/*
--
GitLab
From c304db8a860c10abfaf72f7faa3df598079e2f0c Mon Sep 17 00:00:00 2001
From: Sebastian Ott <sebott@linux.vnet.ibm.com>
Date: Mon, 9 Aug 2010 18:12:54 +0200
Subject: [PATCH 528/863] [S390] cio: use all available paths for some internal
I/O
Use all available paths for the SENSE ID and STLCK commands. This
prevents deadlocks in conjunction with reserved devices.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
drivers/s390/cio/device_id.c | 1 -
drivers/s390/cio/device_pgid.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c
index 0d7fe4dab3b6b..78a0b43862c5f 100644
--- a/drivers/s390/cio/device_id.c
+++ b/drivers/s390/cio/device_id.c
@@ -216,7 +216,6 @@ void ccw_device_sense_id_start(struct ccw_device *cdev)
req->timeout = SENSE_ID_TIMEOUT;
req->maxretries = SENSE_ID_RETRIES;
req->lpm = sch->schib.pmcw.pam & sch->opm;
- req->singlepath = 1;
req->check = snsid_check;
req->callback = snsid_callback;
ccw_request_start(cdev);
diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c
index f1fdf0ec7f030..82a5ad0d63f67 100644
--- a/drivers/s390/cio/device_pgid.c
+++ b/drivers/s390/cio/device_pgid.c
@@ -563,7 +563,6 @@ void ccw_device_stlck_start(struct ccw_device *cdev, void *data, void *buf1,
req->timeout = PGID_TIMEOUT;
req->maxretries = PGID_RETRIES;
req->lpm = sch->schib.pmcw.pam & sch->opm;
- req->singlepath = 1;
req->data = data;
req->callback = stlck_callback;
stlck_build_cp(cdev, buf1, buf2);
--
GitLab
From 2e85ba510ede4aea1b150493407ae911e8ea5051 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 9 Aug 2010 18:12:55 +0200
Subject: [PATCH 529/863] [S390] cmm: add missing __init/__exit annotations
Add missing __init and __exit annoations for module init and exit
functions. This will save us huge amounts of memory... sort of.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
arch/s390/mm/cmm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index eb6a2ef5f82e8..4bddf8d3a1502 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -427,7 +427,7 @@ static struct notifier_block cmm_power_notifier = {
.notifier_call = cmm_power_event,
};
-static int cmm_init(void)
+static int __init cmm_init(void)
{
int rc = -ENOMEM;
@@ -467,7 +467,7 @@ static int cmm_init(void)
}
module_init(cmm_init);
-static void cmm_exit(void)
+static void __exit cmm_exit(void)
{
unregister_sysctl_table(cmm_sysctl_header);
#ifdef CONFIG_CMM_IUCV
--
GitLab
From 41b42876772bb8c1cbd7e68d384791f97a5fd0d6 Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Mon, 9 Aug 2010 18:12:56 +0200
Subject: [PATCH 530/863] [S390] cmm, smsgiucv_app: convert sender to uppercase
The sender kernel parameter contains a z/VM user ID where
alphabetic characters must be specified in uppercase.
Allow users to specify lowercase characters and convert the
sender string to uppercase at module initialization.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
arch/s390/mm/cmm.c | 7 +++++++
drivers/s390/net/smsgiucv_app.c | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 4bddf8d3a1502..a9550dca3e4b2 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -435,6 +435,13 @@ static int __init cmm_init(void)
if (!cmm_sysctl_header)
goto out_sysctl;
#ifdef CONFIG_CMM_IUCV
+ /* convert sender to uppercase characters */
+ if (sender) {
+ int len = strlen(sender);
+ while (len--)
+ sender[len] = toupper(sender[len]);
+ }
+
rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
if (rc < 0)
goto out_smsg;
diff --git a/drivers/s390/net/smsgiucv_app.c b/drivers/s390/net/smsgiucv_app.c
index 1376887902072..4d2ea4000422d 100644
--- a/drivers/s390/net/smsgiucv_app.c
+++ b/drivers/s390/net/smsgiucv_app.c
@@ -180,6 +180,13 @@ static int __init smsgiucv_app_init(void)
goto fail_put_driver;
}
+ /* convert sender to uppercase characters */
+ if (sender) {
+ int len = strlen(sender);
+ while (len--)
+ sender[len] = toupper(sender[len]);
+ }
+
/* register with the smsgiucv device driver */
rc = smsg_register_callback(SMSG_PREFIX, smsg_app_callback);
if (rc) {
--
GitLab
From e033b9a0c6ca137388e363a7250809f85b35eb3f Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 9 Aug 2010 18:12:57 +0200
Subject: [PATCH 531/863] [S390] initrd: change default load address
Change default load address of the initrd in case of IPL from reader.
The new load address is directly behind the kernel image.
This way we can see immediatly if there are any problems with the code
which tries to rescue the initrd in case the bootmem bitmap would
overlap with the initrd.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
arch/s390/kernel/head.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 51838ad42d56d..db1696e210af4 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -366,7 +366,7 @@ iplstart:
l %r1,.Lstartup
br %r1
-.Linitrd:.long _end + 0x400000 # default address of initrd
+.Linitrd:.long _end # default address of initrd
.Lparm: .long PARMAREA
.Lstartup: .long startup
.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
--
GitLab
From eafd2b6ddd8604998bdfbf7550b23795c07f03bb Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 9 Aug 2010 18:12:58 +0200
Subject: [PATCH 532/863] [S390] topology: use default MC domain initializer
Use default MC sched domain initializer, since performance meassurements
finally showed that this is indeed better.
Besides the fact that the powersavings flags functions didn't make too
much sense, but were unused anyway.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
arch/s390/include/asm/topology.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index dc8a67297d0f6..831bd033ea77b 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -30,8 +30,6 @@ static inline void s390_init_cpu_topology(void)
};
#endif
-#define SD_MC_INIT SD_CPU_INIT
-
#include <asm-generic/topology.h>
#endif /* _ASM_S390_TOPOLOGY_H */
--
GitLab
From f932bcea6b7317312ab38df12a84710fc6c67a81 Mon Sep 17 00:00:00 2001
From: Stefan Weinhuber <wein@de.ibm.com>
Date: Mon, 9 Aug 2010 18:12:59 +0200
Subject: [PATCH 533/863] [S390] dasd: allocate fallback cqr for
reserve/release
The DASD reserve and release ioctls use the preallocated memory pool
of the respective device to build their CCW requests. However, when
the device is busy, the pool may already be empty and the ioctl fails.
Usually this can be recovered by calling the ioctl again, but in
a situation in which we need to issue an unconditional reserve to
make a device operational again, this would be not recoverable.
To avoid a failure due to lack of memory, DASD device driver will
preallocate enough memory for a single reserve/release request, which
can be used if normal allocation fails.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
drivers/s390/block/dasd_eckd.c | 73 ++++++++++++++++++++++++++++------
1 file changed, 60 insertions(+), 13 deletions(-)
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index ab84da5592e8a..0483b2e76b11c 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -82,6 +82,14 @@ static struct ccw_driver dasd_eckd_driver; /* see below */
#define INIT_CQR_UNFORMATTED 1
#define INIT_CQR_ERROR 2
+/* emergency request for reserve/release */
+static struct {
+ struct dasd_ccw_req cqr;
+ struct ccw1 ccw;
+ char data[32];
+} *dasd_reserve_req;
+static DEFINE_MUTEX(dasd_reserve_mutex);
+
/* initial attempt at a probe function. this can be simplified once
* the other detection code is gone */
@@ -2645,15 +2653,23 @@ dasd_eckd_release(struct dasd_device *device)
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
+ int useglobal;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
+ useglobal = 0;
cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
- DBF_DEV_EVENT(DBF_WARNING, device, "%s",
- "Could not allocate initialization request");
- return PTR_ERR(cqr);
+ mutex_lock(&dasd_reserve_mutex);
+ useglobal = 1;
+ cqr = &dasd_reserve_req->cqr;
+ memset(cqr, 0, sizeof(*cqr));
+ memset(&dasd_reserve_req->ccw, 0,
+ sizeof(dasd_reserve_req->ccw));
+ cqr->cpaddr = &dasd_reserve_req->ccw;
+ cqr->data = &dasd_reserve_req->data;
+ cqr->magic = DASD_ECKD_MAGIC;
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_RELEASE;
@@ -2671,7 +2687,10 @@ dasd_eckd_release(struct dasd_device *device)
rc = dasd_sleep_on_immediatly(cqr);
- dasd_sfree_request(cqr, cqr->memdev);
+ if (useglobal)
+ mutex_unlock(&dasd_reserve_mutex);
+ else
+ dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
@@ -2687,15 +2706,23 @@ dasd_eckd_reserve(struct dasd_device *device)
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
+ int useglobal;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
+ useglobal = 0;
cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
- DBF_DEV_EVENT(DBF_WARNING, device, "%s",
- "Could not allocate initialization request");
- return PTR_ERR(cqr);
+ mutex_lock(&dasd_reserve_mutex);
+ useglobal = 1;
+ cqr = &dasd_reserve_req->cqr;
+ memset(cqr, 0, sizeof(*cqr));
+ memset(&dasd_reserve_req->ccw, 0,
+ sizeof(dasd_reserve_req->ccw));
+ cqr->cpaddr = &dasd_reserve_req->ccw;
+ cqr->data = &dasd_reserve_req->data;
+ cqr->magic = DASD_ECKD_MAGIC;
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_RESERVE;
@@ -2713,7 +2740,10 @@ dasd_eckd_reserve(struct dasd_device *device)
rc = dasd_sleep_on_immediatly(cqr);
- dasd_sfree_request(cqr, cqr->memdev);
+ if (useglobal)
+ mutex_unlock(&dasd_reserve_mutex);
+ else
+ dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
@@ -2728,15 +2758,23 @@ dasd_eckd_steal_lock(struct dasd_device *device)
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
+ int useglobal;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
+ useglobal = 0;
cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
- DBF_DEV_EVENT(DBF_WARNING, device, "%s",
- "Could not allocate initialization request");
- return PTR_ERR(cqr);
+ mutex_lock(&dasd_reserve_mutex);
+ useglobal = 1;
+ cqr = &dasd_reserve_req->cqr;
+ memset(cqr, 0, sizeof(*cqr));
+ memset(&dasd_reserve_req->ccw, 0,
+ sizeof(dasd_reserve_req->ccw));
+ cqr->cpaddr = &dasd_reserve_req->ccw;
+ cqr->data = &dasd_reserve_req->data;
+ cqr->magic = DASD_ECKD_MAGIC;
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_SLCK;
@@ -2754,7 +2792,10 @@ dasd_eckd_steal_lock(struct dasd_device *device)
rc = dasd_sleep_on_immediatly(cqr);
- dasd_sfree_request(cqr, cqr->memdev);
+ if (useglobal)
+ mutex_unlock(&dasd_reserve_mutex);
+ else
+ dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
@@ -3488,10 +3529,15 @@ dasd_eckd_init(void)
int ret;
ASCEBC(dasd_eckd_discipline.ebcname, 4);
+ dasd_reserve_req = kmalloc(sizeof(*dasd_reserve_req),
+ GFP_KERNEL | GFP_DMA);
+ if (!dasd_reserve_req)
+ return -ENOMEM;
ret = ccw_driver_register(&dasd_eckd_driver);
if (!ret)
wait_for_device_probe();
-
+ else
+ kfree(dasd_reserve_req);
return ret;
}
@@ -3499,6 +3545,7 @@ static void __exit
dasd_eckd_cleanup(void)
{
ccw_driver_unregister(&dasd_eckd_driver);
+ kfree(dasd_reserve_req);
}
module_init(dasd_eckd_init);
--
GitLab
From 7c8faa86290c1a2607d6b768a0b874ec392a5c2a Mon Sep 17 00:00:00 2001
From: Stefan Haberland <stefan.haberland@de.ibm.com>
Date: Mon, 9 Aug 2010 18:13:00 +0200
Subject: [PATCH 534/863] [S390] dasd: tunable missing interrupt handler
This feature provides a user interface to specify the timeout for
missing interrupts for standard I/O operations.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
drivers/s390/block/dasd_devmap.c | 44 ++++++++++++++++++++++++++++++++
drivers/s390/block/dasd_diag.c | 6 +++--
drivers/s390/block/dasd_eckd.c | 21 ++++++++++++---
drivers/s390/block/dasd_eckd.h | 7 ++++-
drivers/s390/block/dasd_fba.c | 4 ++-
drivers/s390/block/dasd_int.h | 8 +++++-
6 files changed, 81 insertions(+), 9 deletions(-)
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index bed7b4634ccd4..8d41f3ed38d7b 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -1083,6 +1083,49 @@ dasd_eer_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR(eer_enabled, 0644, dasd_eer_show, dasd_eer_store);
+/*
+ * expiration time for default requests
+ */
+static ssize_t
+dasd_expires_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct dasd_device *device;
+ int len;
+
+ device = dasd_device_from_cdev(to_ccwdev(dev));
+ if (IS_ERR(device))
+ return -ENODEV;
+ len = snprintf(buf, PAGE_SIZE, "%lu\n", device->default_expires);
+ dasd_put_device(device);
+ return len;
+}
+
+static ssize_t
+dasd_expires_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dasd_device *device;
+ unsigned long val;
+
+ device = dasd_device_from_cdev(to_ccwdev(dev));
+ if (IS_ERR(device))
+ return -ENODEV;
+
+ if ((strict_strtoul(buf, 10, &val) != 0) ||
+ (val > DASD_EXPIRES_MAX) || val == 0) {
+ dasd_put_device(device);
+ return -EINVAL;
+ }
+
+ if (val)
+ device->default_expires = val;
+
+ dasd_put_device(device);
+ return count;
+}
+
+static DEVICE_ATTR(expires, 0644, dasd_expires_show, dasd_expires_store);
+
static struct attribute * dasd_attrs[] = {
&dev_attr_readonly.attr,
&dev_attr_discipline.attr,
@@ -1094,6 +1137,7 @@ static struct attribute * dasd_attrs[] = {
&dev_attr_eer_enabled.attr,
&dev_attr_erplog.attr,
&dev_attr_failfast.attr,
+ &dev_attr_expires.attr,
NULL,
};
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 687f323cdc38c..2b3bc3ec0541e 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -43,7 +43,7 @@ MODULE_LICENSE("GPL");
sizeof(struct dasd_diag_req)) / \
sizeof(struct dasd_diag_bio)) / 2)
#define DIAG_MAX_RETRIES 32
-#define DIAG_TIMEOUT 50 * HZ
+#define DIAG_TIMEOUT 50
static struct dasd_discipline dasd_diag_discipline;
@@ -360,6 +360,8 @@ dasd_diag_check_device(struct dasd_device *device)
goto out;
}
+ device->default_expires = DIAG_TIMEOUT;
+
/* Figure out position of label block */
switch (private->rdc_data.vdev_class) {
case DEV_CLASS_FBA:
@@ -563,7 +565,7 @@ static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev,
cqr->startdev = memdev;
cqr->memdev = memdev;
cqr->block = block;
- cqr->expires = DIAG_TIMEOUT;
+ cqr->expires = memdev->default_expires * HZ;
cqr->status = DASD_CQR_FILLED;
return cqr;
}
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 0483b2e76b11c..66360c24bd481 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1115,8 +1115,9 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
struct dasd_eckd_private *private;
struct dasd_block *block;
struct dasd_uid temp_uid;
- int is_known, rc;
+ int is_known, rc, i;
int readonly;
+ unsigned long value;
if (!ccw_device_is_pathgroup(device->cdev)) {
dev_warn(&device->cdev->dev,
@@ -1151,6 +1152,18 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
if (rc)
goto out_err1;
+ /* set default timeout */
+ device->default_expires = DASD_EXPIRES;
+ if (private->gneq) {
+ value = 1;
+ for (i = 0; i < private->gneq->timeout.value; i++)
+ value = 10 * value;
+ value = value * private->gneq->timeout.number;
+ /* do not accept useless values */
+ if (value != 0 && value <= DASD_EXPIRES_MAX)
+ device->default_expires = value;
+ }
+
/* Generate device unique id */
rc = dasd_eckd_generate_uid(device);
if (rc)
@@ -1981,7 +1994,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_single(
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
- cqr->expires = 5 * 60 * HZ; /* 5 minutes */
+ cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
@@ -2158,7 +2171,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track(
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
- cqr->expires = 5 * 60 * HZ; /* 5 minutes */
+ cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
@@ -2406,7 +2419,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
- cqr->expires = 5 * 60 * HZ; /* 5 minutes */
+ cqr->expires = startdev->default_expires * HZ; /* default 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index dd6385a5af142..0eb49655a6cd0 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -320,7 +320,12 @@ struct dasd_gneq {
__u8 identifier:2;
__u8 reserved:6;
} __attribute__ ((packed)) flags;
- __u8 reserved[7];
+ __u8 reserved[5];
+ struct {
+ __u8 value:2;
+ __u8 number:6;
+ } __attribute__ ((packed)) timeout;
+ __u8 reserved3;
__u16 subsystemID;
__u8 reserved2[22];
} __attribute__ ((packed));
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 37282b90eecce..bec5486e0e6da 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -163,6 +163,8 @@ dasd_fba_check_characteristics(struct dasd_device *device)
return rc;
}
+ device->default_expires = DASD_EXPIRES;
+
readonly = dasd_device_is_ro(device);
if (readonly)
set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
@@ -370,7 +372,7 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
cqr->startdev = memdev;
cqr->memdev = memdev;
cqr->block = block;
- cqr->expires = 5 * 60 * HZ; /* 5 minutes */
+ cqr->expires = memdev->default_expires * HZ; /* default 5 minutes */
cqr->retries = 32;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 49b431d135e06..500678d7116c2 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -186,7 +186,7 @@ struct dasd_ccw_req {
/* ... and how */
unsigned long starttime; /* jiffies time of request start */
- int expires; /* expiration period in jiffies */
+ unsigned long expires; /* expiration period in jiffies */
char lpm; /* logical path mask */
void *data; /* pointer to data area */
@@ -224,6 +224,9 @@ struct dasd_ccw_req {
#define DASD_CQR_CLEARED 0x84 /* request was cleared */
#define DASD_CQR_SUCCESS 0x85 /* request was successful */
+/* default expiration time*/
+#define DASD_EXPIRES 300
+#define DASD_EXPIRES_MAX 40000000
/* per dasd_ccw_req flags */
#define DASD_CQR_FLAGS_USE_ERP 0 /* use ERP for this request */
@@ -404,6 +407,9 @@ struct dasd_device {
/* hook for alias management */
struct list_head alias_list;
+
+ /* default expiration time in s */
+ unsigned long default_expires;
};
struct dasd_block {
--
GitLab
From ceeab92971e8af05c1e81a4ff2c271124b55bb9b Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 6 Aug 2010 22:58:49 +0200
Subject: [PATCH 535/863] fs/ecryptfs/file.c: introduce missing free
The comments in the code indicate that file_info should be released if the
function fails. This releasing is done at the label out_free, not out.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@
x@p1 = kmem_cache_zalloc(...);
...
if (x == NULL) S
<... when != x
when != if (...) { <+...x...+> }
(
x->f1 = E
|
(x->f1 == NULL || ...)
|
f(...,x->f1,...)
)
...>
(
return <+...x...+>;
|
return@p2 ...;
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
print "* file: %s kmem_cache_zalloc %s" % (p1[0].file,p1[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: stable@kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
fs/ecryptfs/file.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 6e4f84cf73e8d..622c95140802c 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -199,7 +199,7 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
"the persistent file for the dentry with name "
"[%s]; rc = [%d]\n", __func__,
ecryptfs_dentry->d_name.name, rc);
- goto out;
+ goto out_free;
}
}
if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
@@ -207,7 +207,7 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
rc = -EPERM;
printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
"file must hence be opened RO\n", __func__);
- goto out;
+ goto out_free;
}
ecryptfs_set_file_lower(
file, ecryptfs_inode_to_private(inode)->lower_file);
--
GitLab
From 21edad32205e97dc7ccb81a85234c77e760364c8 Mon Sep 17 00:00:00 2001
From: Lino Sanfilippo <linosanfilippo@gmx.de>
Date: Thu, 15 Jul 2010 15:11:55 +0200
Subject: [PATCH 536/863] ecryptfs: dont call lookup_one_len to avoid NULL
nameidata
I have encountered the same problem that Eric Sandeen described in
this post
http://lkml.org/lkml/fancy/2010/4/23/467
while experimenting with stackable filesystems.
The reason seems to be that ecryptfs calls lookup_one_len() to get the
lower dentry, which in turn calls the lower parent dirs d_revalidate()
with a NULL nameidata object.
If ecryptfs is the underlaying filesystem, the NULL pointer dereference
occurs, since ecryptfs is not prepared to handle a NULL nameidata.
I know that this cant happen any more, since it is no longer allowed to
mount ecryptfs upon itself.
But maybe this patch it useful nevertheless, since the problem would still
apply for an underlaying filesystem that implements d_revalidate() and is
not prepared to handle a NULL nameidata (I dont know if there actually
is such a fs).
With this patch (against 2.6.35-rc5) ecryptfs uses the vfs_lookup_path()
function instead of lookup_one_len() which ensures that the nameidata
passed to the lower filesystems d_revalidate().
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
fs/ecryptfs/inode.c | 89 +++++++++++++++++++++++++++++++++++++++------
1 file changed, 77 insertions(+), 12 deletions(-)
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 8cd617b66baa0..a8acfc5d34765 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -347,6 +347,76 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
return rc;
}
+/**
+ * ecryptfs_new_lower_dentry
+ * @ename: The name of the new dentry.
+ * @lower_dir_dentry: Parent directory of the new dentry.
+ * @nd: nameidata from last lookup.
+ *
+ * Create a new dentry or get it from lower parent dir.
+ */
+static struct dentry *
+ecryptfs_new_lower_dentry(struct qstr *name, struct dentry *lower_dir_dentry,
+ struct nameidata *nd)
+{
+ struct dentry *new_dentry;
+ struct dentry *tmp;
+ struct inode *lower_dir_inode;
+
+ lower_dir_inode = lower_dir_dentry->d_inode;
+
+ tmp = d_alloc(lower_dir_dentry, name);
+ if (!tmp)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&lower_dir_inode->i_mutex);
+ new_dentry = lower_dir_inode->i_op->lookup(lower_dir_inode, tmp, nd);
+ mutex_unlock(&lower_dir_inode->i_mutex);
+
+ if (!new_dentry)
+ new_dentry = tmp;
+ else
+ dput(tmp);
+
+ return new_dentry;
+}
+
+
+/**
+ * ecryptfs_lookup_one_lower
+ * @ecryptfs_dentry: The eCryptfs dentry that we are looking up
+ * @lower_dir_dentry: lower parent directory
+ *
+ * Get the lower dentry from vfs. If lower dentry does not exist yet,
+ * create it.
+ */
+static struct dentry *
+ecryptfs_lookup_one_lower(struct dentry *ecryptfs_dentry,
+ struct dentry *lower_dir_dentry)
+{
+ struct nameidata nd;
+ struct vfsmount *lower_mnt;
+ struct qstr *name;
+ int err;
+
+ name = &ecryptfs_dentry->d_name;
+ lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(
+ ecryptfs_dentry->d_parent));
+ err = vfs_path_lookup(lower_dir_dentry, lower_mnt, name->name , 0, &nd);
+ mntput(lower_mnt);
+
+ if (!err) {
+ /* we dont need the mount */
+ mntput(nd.path.mnt);
+ return nd.path.dentry;
+ }
+ if (err != -ENOENT)
+ return ERR_PTR(err);
+
+ /* create a new lower dentry */
+ return ecryptfs_new_lower_dentry(name, lower_dir_dentry, &nd);
+}
+
/**
* ecryptfs_lookup
* @ecryptfs_dir_inode: The eCryptfs directory inode
@@ -374,14 +444,12 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
goto out_d_drop;
}
lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
- mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
- lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
- lower_dir_dentry,
- ecryptfs_dentry->d_name.len);
- mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
+
+ lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
+ lower_dir_dentry);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
"[%d] on lower_dentry = [%s]\n", __func__, rc,
encrypted_and_encoded_name);
goto out_d_drop;
@@ -403,14 +471,11 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
"filename; rc = [%d]\n", __func__, rc);
goto out_d_drop;
}
- mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
- lower_dentry = lookup_one_len(encrypted_and_encoded_name,
- lower_dir_dentry,
- encrypted_and_encoded_name_size - 1);
- mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
+ lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
+ lower_dir_dentry);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
"[%d] on lower_dentry = [%s]\n", __func__, rc,
encrypted_and_encoded_name);
goto out_d_drop;
--
GitLab
From 2b9e12d0177c1543210a412e3f64a67ebb46ccb9 Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sun, 23 May 2010 22:01:56 +0200
Subject: [PATCH 537/863] arch/m68k/sun3/leds.c: Checkpatch cleanup
arch/m68k/sun3/leds.c:10: ERROR: code indent should use tabs where possible
arch/m68k/sun3/leds.c:11: ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
arch/m68k/sun3/leds.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/sun3/leds.c b/arch/m68k/sun3/leds.c
index a3e948463982f..aad2e0a0682ec 100644
--- a/arch/m68k/sun3/leds.c
+++ b/arch/m68k/sun3/leds.c
@@ -7,7 +7,7 @@ void sun3_leds(unsigned char byte)
unsigned char dfc;
GET_DFC(dfc);
- SET_DFC(FC_CONTROL);
- SET_CONTROL_BYTE(AC_LEDS,byte);
+ SET_DFC(FC_CONTROL);
+ SET_CONTROL_BYTE(AC_LEDS, byte);
SET_DFC(dfc);
}
--
GitLab
From 1b460102323a08874e942a330b896c30d50ab235 Mon Sep 17 00:00:00 2001
From: Finn Thain <fthain@telegraphics.com.au>
Date: Sat, 29 May 2010 03:27:18 +1000
Subject: [PATCH 538/863] m68k/mac: Add color classic ii support
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
arch/m68k/mac/config.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 1c16b1baf8dbf..c247de02bc7e2 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -332,6 +332,15 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
+ }, {
+ .ident = MAC_MODEL_CCLII,
+ .name = "Color Classic II",
+ .adb_type = MAC_ADB_CUDA,
+ .via_type = MAC_VIA_IIci,
+ .scsi_type = MAC_SCSI_OLD,
+ .scc_type = MAC_SCC_II,
+ .nubus_type = MAC_NUBUS,
+ .floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
--
GitLab
From d643e2d2cc1d1f37751a99a7c4cb30064cc68aac Mon Sep 17 00:00:00 2001
From: Finn Thain <fthain@telegraphics.com.au>
Date: Wed, 2 Jun 2010 15:58:24 +0200
Subject: [PATCH 539/863] m68k/mac: Fix RTC on PMU machines
Copy RTC response bytes correctly on powerbooks and duos. Thanks to Diego
Cousinet who debugged this and provided me with the fix. Tested on
PowerBook 190 and Duo 280c.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reported-by: Diego Cousinet <diego@pvco.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
arch/m68k/mac/misc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
index 0f118ca156d9a..e023fc6b37e5b 100644
--- a/arch/m68k/mac/misc.c
+++ b/arch/m68k/mac/misc.c
@@ -91,7 +91,7 @@ static void cuda_write_pram(int offset, __u8 data)
#define cuda_write_pram NULL
#endif
-#if 0 /* def CONFIG_ADB_PMU68K */
+#ifdef CONFIG_ADB_PMU68K
static long pmu_read_time(void)
{
struct adb_request req;
@@ -102,8 +102,8 @@ static long pmu_read_time(void)
while (!req.complete)
pmu_poll();
- time = (req.reply[0] << 24) | (req.reply[1] << 16)
- | (req.reply[2] << 8) | req.reply[3];
+ time = (req.reply[1] << 24) | (req.reply[2] << 16)
+ | (req.reply[3] << 8) | req.reply[4];
return time - RTC_OFFSET;
}
--
GitLab
From d50ac468dd023db32c9455b2df56237caf601cbd Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sat, 5 Jun 2010 13:28:09 +0200
Subject: [PATCH 540/863] zorro: BKL removal
Remove BKL use from proc_bus_zorro_lseek(), like was done for
proc_bus_pci_lseek() a long time ago.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/zorro/proc.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/zorro/proc.c b/drivers/zorro/proc.c
index 3c7046d796548..4f4ea88fbb712 100644
--- a/drivers/zorro/proc.c
+++ b/drivers/zorro/proc.c
@@ -22,8 +22,9 @@ static loff_t
proc_bus_zorro_lseek(struct file *file, loff_t off, int whence)
{
loff_t new = -1;
+ struct inode *inode = file->f_path.dentry->d_inode;
- lock_kernel();
+ mutex_lock(&inode->i_mutex);
switch (whence) {
case 0:
new = off;
@@ -35,12 +36,12 @@ proc_bus_zorro_lseek(struct file *file, loff_t off, int whence)
new = sizeof(struct ConfigDev) + off;
break;
}
- if (new < 0 || new > sizeof(struct ConfigDev)) {
- unlock_kernel();
- return -EINVAL;
- }
- unlock_kernel();
- return (file->f_pos = new);
+ if (new < 0 || new > sizeof(struct ConfigDev))
+ new = -EINVAL;
+ else
+ file->f_pos = new;
+ mutex_unlock(&inode->i_mutex);
+ return new;
}
static ssize_t
--
GitLab
From 2190a1e7705456c2298873b2547a6eb19b8e31ae Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Wed, 9 Jun 2010 11:24:32 +0200
Subject: [PATCH 541/863] zorro: Fix reading of proc/bus/zorro/* in small
chunks
proc_bus_zorro_read() didn't take into account the current file position,
hence it always read from the start of the ConfigDev.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
drivers/zorro/proc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/zorro/proc.c b/drivers/zorro/proc.c
index 4f4ea88fbb712..cafc504542927 100644
--- a/drivers/zorro/proc.c
+++ b/drivers/zorro/proc.c
@@ -68,7 +68,7 @@ proc_bus_zorro_read(struct file *file, char __user *buf, size_t nbytes, loff_t *
cd.cd_BoardAddr = (void *)zorro_resource_start(z);
cd.cd_BoardSize = zorro_resource_len(z);
- if (copy_to_user(buf, &cd, nbytes))
+ if (copy_to_user(buf, (void *)&cd + pos, nbytes))
return -EFAULT;
*ppos += nbytes;
--
GitLab
From 005a59ec745d23f60222f7712adde48f64d7d3c8 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 21 Apr 2009 01:27:08 -0400
Subject: [PATCH 542/863] Deal with missing exports for hostfs
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
arch/um/include/shared/os.h | 3 +++
arch/um/kernel/ksyms.c | 3 +++
arch/um/os-Linux/file.c | 15 +++++++++++++++
arch/um/os-Linux/user_syms.c | 4 ++++
fs/hostfs/hostfs_user.c | 6 +++---
5 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index cd40fddcf99df..c4617baaa4f27 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -161,6 +161,9 @@ extern int os_stat_filesystem(char *path, long *bsize_out,
long *spare_out);
extern int os_change_dir(char *dir);
extern int os_fchange_dir(int fd);
+extern unsigned os_major(unsigned long long dev);
+extern unsigned os_minor(unsigned long long dev);
+extern unsigned long long os_makedev(unsigned major, unsigned minor);
/* start_up.c */
extern void os_early_checks(void);
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 836fc9b947071..0ae0dfcfbffbb 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -58,6 +58,9 @@ EXPORT_SYMBOL(os_accept_connection);
EXPORT_SYMBOL(os_rcv_fd);
EXPORT_SYMBOL(run_helper);
EXPORT_SYMBOL(start_thread);
+EXPORT_SYMBOL(os_major);
+EXPORT_SYMBOL(os_minor);
+EXPORT_SYMBOL(os_makedev);
EXPORT_SYMBOL(add_sigio_fd);
EXPORT_SYMBOL(ignore_sigio_fd);
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index b5afcfd0f8611..140e587bc0ade 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -561,3 +561,18 @@ int os_lock_file(int fd, int excl)
out:
return err;
}
+
+unsigned os_major(unsigned long long dev)
+{
+ return major(dev);
+}
+
+unsigned os_minor(unsigned long long dev)
+{
+ return minor(dev);
+}
+
+unsigned long long os_makedev(unsigned major, unsigned minor)
+{
+ return makedev(major, minor);
+}
diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
index 89b48a116a89b..05f5ea8e83d2a 100644
--- a/arch/um/os-Linux/user_syms.c
+++ b/arch/um/os-Linux/user_syms.c
@@ -103,6 +103,10 @@ EXPORT_SYMBOL_PROTO(getuid);
EXPORT_SYMBOL_PROTO(fsync);
EXPORT_SYMBOL_PROTO(fdatasync);
+EXPORT_SYMBOL_PROTO(lstat64);
+EXPORT_SYMBOL_PROTO(fstat64);
+EXPORT_SYMBOL_PROTO(mknod);
+
/* Export symbols used by GCC for the stack protector. */
extern void __stack_smash_handler(void *) __attribute__((weak));
EXPORT_SYMBOL(__stack_smash_handler);
diff --git a/fs/hostfs/hostfs_user.c b/fs/hostfs/hostfs_user.c
index b79424f932829..4b8c666ba28f5 100644
--- a/fs/hostfs/hostfs_user.c
+++ b/fs/hostfs/hostfs_user.c
@@ -76,9 +76,9 @@ int file_type(const char *path, int *maj, int *min)
* about its definition.
*/
if (maj != NULL)
- *maj = major(buf.st_rdev);
+ *maj = os_major(buf.st_rdev);
if (min != NULL)
- *min = minor(buf.st_rdev);
+ *min = os_minor(buf.st_rdev);
if (S_ISDIR(buf.st_mode))
return OS_TYPE_DIR;
@@ -361,7 +361,7 @@ int do_mknod(const char *file, int mode, unsigned int major, unsigned int minor)
{
int err;
- err = mknod(file, mode, makedev(major, minor));
+ err = mknod(file, mode, os_makedev(major, minor));
if (err)
return -errno;
return 0;
--
GitLab
From 918377b696bff7384923a1ef4bf0af7626cb9b68 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 23:56:02 -0400
Subject: [PATCH 543/863] missing include in hppfs
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hppfs/hppfs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index 826c3f9d29ac6..943ce751ce19b 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -15,6 +15,7 @@
#include <linux/slab.h>
#include <linux/statfs.h>
#include <linux/types.h>
+#include <linux/pid_namespace.h>
#include <asm/uaccess.h>
#include "os.h"
--
GitLab
From 0e4f6a791b1e8cfde75a74e2f885642ecb3fe9d8 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 4 Jul 2010 12:18:57 +0400
Subject: [PATCH 544/863] Fix reiserfs_file_release()
a) count file openers correctly; i_count use was completely wrong
b) use new mutex for exclusion between final close/open/truncate,
to protect tailpacking logics. i_mutex use was wrong and resulted
in deadlocks.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/reiserfs/file.c | 50 ++++++++++++++++++++---------------
fs/reiserfs/inode.c | 2 --
fs/reiserfs/super.c | 2 ++
include/linux/reiserfs_fs_i.h | 4 +--
4 files changed, 32 insertions(+), 26 deletions(-)
diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c
index b82cdd8a45dd8..6846371498b68 100644
--- a/fs/reiserfs/file.c
+++ b/fs/reiserfs/file.c
@@ -38,20 +38,24 @@ static int reiserfs_file_release(struct inode *inode, struct file *filp)
BUG_ON(!S_ISREG(inode->i_mode));
+ if (atomic_add_unless(&REISERFS_I(inode)->openers, -1, 1))
+ return 0;
+
+ mutex_lock(&(REISERFS_I(inode)->tailpack));
+
+ if (!atomic_dec_and_test(&REISERFS_I(inode)->openers)) {
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
+ return 0;
+ }
+
/* fast out for when nothing needs to be done */
- if ((atomic_read(&inode->i_count) > 1 ||
- !(REISERFS_I(inode)->i_flags & i_pack_on_close_mask) ||
+ if ((!(REISERFS_I(inode)->i_flags & i_pack_on_close_mask) ||
!tail_has_to_be_packed(inode)) &&
REISERFS_I(inode)->i_prealloc_count <= 0) {
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
return 0;
}
- mutex_lock(&inode->i_mutex);
-
- mutex_lock(&(REISERFS_I(inode)->i_mmap));
- if (REISERFS_I(inode)->i_flags & i_ever_mapped)
- REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
-
reiserfs_write_lock(inode->i_sb);
/* freeing preallocation only involves relogging blocks that
* are already in the current transaction. preallocation gets
@@ -94,9 +98,10 @@ static int reiserfs_file_release(struct inode *inode, struct file *filp)
if (!err)
err = jbegin_failure;
- if (!err && atomic_read(&inode->i_count) <= 1 &&
+ if (!err &&
(REISERFS_I(inode)->i_flags & i_pack_on_close_mask) &&
tail_has_to_be_packed(inode)) {
+
/* if regular file is released by last holder and it has been
appended (we append by unformatted node only) or its direct
item(s) had to be converted, then it may have to be
@@ -104,27 +109,28 @@ static int reiserfs_file_release(struct inode *inode, struct file *filp)
err = reiserfs_truncate_file(inode, 0);
}
out:
- mutex_unlock(&(REISERFS_I(inode)->i_mmap));
- mutex_unlock(&inode->i_mutex);
reiserfs_write_unlock(inode->i_sb);
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
return err;
}
-static int reiserfs_file_mmap(struct file *file, struct vm_area_struct *vma)
+static int reiserfs_file_open(struct inode *inode, struct file *file)
{
- struct inode *inode;
-
- inode = file->f_path.dentry->d_inode;
- mutex_lock(&(REISERFS_I(inode)->i_mmap));
- REISERFS_I(inode)->i_flags |= i_ever_mapped;
- mutex_unlock(&(REISERFS_I(inode)->i_mmap));
-
- return generic_file_mmap(file, vma);
+ int err = dquot_file_open(inode, file);
+ if (!atomic_inc_not_zero(&REISERFS_I(inode)->openers)) {
+ /* somebody might be tailpacking on final close; wait for it */
+ mutex_lock(&(REISERFS_I(inode)->tailpack));
+ atomic_inc(&REISERFS_I(inode)->openers);
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
+ }
+ return err;
}
static void reiserfs_vfs_truncate_file(struct inode *inode)
{
+ mutex_lock(&(REISERFS_I(inode)->tailpack));
reiserfs_truncate_file(inode, 1);
+ mutex_unlock(&(REISERFS_I(inode)->tailpack));
}
/* Sync a reiserfs file. */
@@ -288,8 +294,8 @@ const struct file_operations reiserfs_file_operations = {
#ifdef CONFIG_COMPAT
.compat_ioctl = reiserfs_compat_ioctl,
#endif
- .mmap = reiserfs_file_mmap,
- .open = dquot_file_open,
+ .mmap = generic_file_mmap,
+ .open = reiserfs_file_open,
.release = reiserfs_file_release,
.fsync = reiserfs_sync_file,
.aio_read = generic_file_aio_read,
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 0f22fdaf54ac0..6edac85c2b931 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1138,7 +1138,6 @@ static void init_inode(struct inode *inode, struct treepath *path)
REISERFS_I(inode)->i_prealloc_count = 0;
REISERFS_I(inode)->i_trans_id = 0;
REISERFS_I(inode)->i_jl = NULL;
- mutex_init(&(REISERFS_I(inode)->i_mmap));
reiserfs_init_xattr_rwsem(inode);
if (stat_data_v1(ih)) {
@@ -1841,7 +1840,6 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th,
REISERFS_I(inode)->i_attrs =
REISERFS_I(dir)->i_attrs & REISERFS_INHERIT_MASK;
sd_attrs_to_i_attrs(REISERFS_I(inode)->i_attrs, inode);
- mutex_init(&(REISERFS_I(inode)->i_mmap));
reiserfs_init_xattr_rwsem(inode);
/* key to search for correct place for new stat data */
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 9822fa15118ba..1e1ee9056eb6a 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -525,6 +525,8 @@ static struct inode *reiserfs_alloc_inode(struct super_block *sb)
kmem_cache_alloc(reiserfs_inode_cachep, GFP_KERNEL);
if (!ei)
return NULL;
+ atomic_set(&ei->openers, 0);
+ mutex_init(&ei->tailpack);
return &ei->vfs_inode;
}
diff --git a/include/linux/reiserfs_fs_i.h b/include/linux/reiserfs_fs_i.h
index 89f4d3abbf5af..97959bdfe2142 100644
--- a/include/linux/reiserfs_fs_i.h
+++ b/include/linux/reiserfs_fs_i.h
@@ -25,7 +25,6 @@ typedef enum {
i_link_saved_truncate_mask = 0x0020,
i_has_xattr_dir = 0x0040,
i_data_log = 0x0080,
- i_ever_mapped = 0x0100
} reiserfs_inode_flags;
struct reiserfs_inode_info {
@@ -53,7 +52,8 @@ struct reiserfs_inode_info {
** flushed */
unsigned int i_trans_id;
struct reiserfs_journal_list *i_jl;
- struct mutex i_mmap;
+ atomic_t openers;
+ struct mutex tailpack;
#ifdef CONFIG_REISERFS_FS_XATTR
struct rw_semaphore i_xattr_sem;
#endif
--
GitLab
From 256249584bda1a9357e2d29987a37f5b2df035f6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 4 Jul 2010 12:23:11 +0400
Subject: [PATCH 545/863] fix leak in __logfs_create()
if kmalloc fails, we still need to drop the inode, as we do
on other failure exits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/logfs/dir.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c
index 72d1893ddd360..675cc49197feb 100644
--- a/fs/logfs/dir.c
+++ b/fs/logfs/dir.c
@@ -434,8 +434,11 @@ static int __logfs_create(struct inode *dir, struct dentry *dentry,
int ret;
ta = kzalloc(sizeof(*ta), GFP_KERNEL);
- if (!ta)
+ if (!ta) {
+ inode->i_nlink--;
+ iput(inode);
return -ENOMEM;
+ }
ta->state = CREATE_1;
ta->ino = inode->i_ino;
--
GitLab
From eafdc7d190a944c755a9fe68573c193e6e0217e7 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:29:53 +0200
Subject: [PATCH 546/863] sort out blockdev_direct_IO variants
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence. This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway. Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/block_dev.c | 5 +--
fs/direct-io.c | 74 ++++++++++---------------------------
fs/ext2/inode.c | 2 +-
fs/ext3/inode.c | 11 ++++++
fs/ext4/inode.c | 15 ++++++--
fs/fat/inode.c | 4 +-
fs/gfs2/aops.c | 6 +--
fs/hfs/inode.c | 17 ++++++++-
fs/hfsplus/inode.c | 17 ++++++++-
fs/jfs/inode.c | 17 ++++++++-
fs/nilfs2/inode.c | 13 +++++++
fs/ocfs2/aops.c | 9 ++---
fs/reiserfs/inode.c | 17 ++++++++-
fs/xfs/linux-2.6/xfs_aops.c | 16 ++++----
include/linux/fs.h | 42 +++------------------
15 files changed, 146 insertions(+), 119 deletions(-)
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 99d6af8117473..65a0c26508e56 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -172,9 +172,8 @@ blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
- return blockdev_direct_IO_no_locking_newtrunc(rw, iocb, inode,
- I_BDEV(inode), iov, offset, nr_segs,
- blkdev_get_blocks, NULL);
+ return __blockdev_direct_IO(rw, iocb, inode, I_BDEV(inode), iov, offset,
+ nr_segs, blkdev_get_blocks, NULL, NULL, 0);
}
int __sync_blockdev(struct block_device *bdev, int wait)
diff --git a/fs/direct-io.c b/fs/direct-io.c
index a10cb91cadea0..51f270b479b69 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -1136,8 +1136,27 @@ direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
return ret;
}
+/*
+ * This is a library function for use by filesystem drivers.
+ *
+ * The locking rules are governed by the flags parameter:
+ * - if the flags value contains DIO_LOCKING we use a fancy locking
+ * scheme for dumb filesystems.
+ * For writes this function is called under i_mutex and returns with
+ * i_mutex held, for reads, i_mutex is not held on entry, but it is
+ * taken and dropped again before returning.
+ * For reads and writes i_alloc_sem is taken in shared mode and released
+ * on I/O completion (which may happen asynchronously after returning to
+ * the caller).
+ *
+ * - if the flags value does NOT contain DIO_LOCKING we don't use any
+ * internal locking but rather rely on the filesystem to synchronize
+ * direct I/O reads/writes versus each other and truncate.
+ * For reads and writes both i_mutex and i_alloc_sem are not held on
+ * entry and are never taken.
+ */
ssize_t
-__blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
+__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
struct block_device *bdev, const struct iovec *iov, loff_t offset,
unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
dio_submit_t submit_io, int flags)
@@ -1233,57 +1252,4 @@ __blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
out:
return retval;
}
-EXPORT_SYMBOL(__blockdev_direct_IO_newtrunc);
-
-/*
- * This is a library function for use by filesystem drivers.
- *
- * The locking rules are governed by the flags parameter:
- * - if the flags value contains DIO_LOCKING we use a fancy locking
- * scheme for dumb filesystems.
- * For writes this function is called under i_mutex and returns with
- * i_mutex held, for reads, i_mutex is not held on entry, but it is
- * taken and dropped again before returning.
- * For reads and writes i_alloc_sem is taken in shared mode and released
- * on I/O completion (which may happen asynchronously after returning to
- * the caller).
- *
- * - if the flags value does NOT contain DIO_LOCKING we don't use any
- * internal locking but rather rely on the filesystem to synchronize
- * direct I/O reads/writes versus each other and truncate.
- * For reads and writes both i_mutex and i_alloc_sem are not held on
- * entry and are never taken.
- */
-ssize_t
-__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
- struct block_device *bdev, const struct iovec *iov, loff_t offset,
- unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- dio_submit_t submit_io, int flags)
-{
- ssize_t retval;
-
- retval = __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov,
- offset, nr_segs, get_block, end_io, submit_io, flags);
- /*
- * In case of error extending write may have instantiated a few
- * blocks outside i_size. Trim these off again for DIO_LOCKING.
- * NOTE: DIO_NO_LOCK/DIO_OWN_LOCK callers have to handle this in
- * their own manner. This is a further example of where the old
- * truncate sequence is inadequate.
- *
- * NOTE: filesystems with their own locking have to handle this
- * on their own.
- */
- if (flags & DIO_LOCKING) {
- if (unlikely((rw & WRITE) && retval < 0)) {
- loff_t isize = i_size_read(inode);
- loff_t end = offset + iov_length(iov, nr_segs);
-
- if (end > isize)
- vmtruncate(inode, isize);
- }
- }
-
- return retval;
-}
EXPORT_SYMBOL(__blockdev_direct_IO);
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 3675088cb88c5..f36e967e4fde3 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -838,7 +838,7 @@ ext2_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
struct inode *inode = mapping->host;
ssize_t ret;
- ret = blockdev_direct_IO_newtrunc(rw, iocb, inode, inode->i_sb->s_bdev,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev,
iov, offset, nr_segs, ext2_get_block, NULL);
if (ret < 0 && (rw & WRITE))
ext2_write_failed(mapping, offset + iov_length(iov, nr_segs));
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 735f0190ec2ab..a66f3fe336722 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1785,6 +1785,17 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb,
ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs,
ext3_get_block, NULL);
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
goto retry;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0afc8c1d8cf35..d6a7701018a6e 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3545,15 +3545,24 @@ static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb,
retry:
if (rw == READ && ext4_should_dioread_nolock(inode))
- ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
+ ret = __blockdev_direct_IO(rw, iocb, inode,
inode->i_sb->s_bdev, iov,
offset, nr_segs,
- ext4_get_block, NULL);
- else
+ ext4_get_block, NULL, NULL, 0);
+ else {
ret = blockdev_direct_IO(rw, iocb, inode,
inode->i_sb->s_bdev, iov,
offset, nr_segs,
ext4_get_block, NULL);
+
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+ }
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 7bf45aee56d76..ffe7c6fdc1ecd 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -212,8 +212,8 @@ static ssize_t fat_direct_IO(int rw, struct kiocb *iocb,
* FAT need to use the DIO_LOCKING for avoiding the race
* condition of fat_get_block() and ->truncate().
*/
- ret = blockdev_direct_IO_newtrunc(rw, iocb, inode, inode->i_sb->s_bdev,
- iov, offset, nr_segs, fat_get_block, NULL);
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev,
+ iov, offset, nr_segs, fat_get_block, NULL);
if (ret < 0 && (rw & WRITE))
fat_write_failed(mapping, offset + iov_length(iov, nr_segs));
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 9f8b52500d635..703000d6e4d2d 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -1047,9 +1047,9 @@ static ssize_t gfs2_direct_IO(int rw, struct kiocb *iocb,
if (rv != 1)
goto out; /* dio not valid, fall back to buffered i/o */
- rv = blockdev_direct_IO_no_locking(rw, iocb, inode, inode->i_sb->s_bdev,
- iov, offset, nr_segs,
- gfs2_get_block_direct, NULL);
+ rv = __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ offset, nr_segs, gfs2_get_block_direct,
+ NULL, NULL, 0);
out:
gfs2_glock_dq_m(1, &gh);
gfs2_holder_uninit(&gh);
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 14f5cb1b9fdcf..07b2464b5716a 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -112,9 +112,24 @@ static ssize_t hfs_direct_IO(int rw, struct kiocb *iocb,
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_path.dentry->d_inode->i_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, hfs_get_block, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
+ return ret;
}
static int hfs_writepages(struct address_space *mapping,
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 9bbb82924a229..4860217739111 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -105,9 +105,24 @@ static ssize_t hfsplus_direct_IO(int rw, struct kiocb *iocb,
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_path.dentry->d_inode->i_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, hfsplus_get_block, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
+ return ret;
}
static int hfsplus_writepages(struct address_space *mapping,
diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c
index ed9ba6fe04f55..79e6cda28181c 100644
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -317,9 +317,24 @@ static ssize_t jfs_direct_IO(int rw, struct kiocb *iocb,
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, jfs_get_block, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
+ return ret;
}
const struct address_space_operations jfs_aops = {
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 39e038ac8fcba..1dd9e6a7d787f 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -237,6 +237,19 @@ nilfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
/* Needs synchronization with the cleaner */
size = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, nilfs_get_block, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && size < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
return size;
}
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 96337a4fbbdfc..0de69c9a08be0 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -643,11 +643,10 @@ static ssize_t ocfs2_direct_IO(int rw,
if (i_size_read(inode) <= offset)
return 0;
- ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
- inode->i_sb->s_bdev, iov, offset,
- nr_segs,
- ocfs2_direct_IO_get_blocks,
- ocfs2_dio_end_io);
+ ret = __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev,
+ iov, offset, nr_segs,
+ ocfs2_direct_IO_get_blocks,
+ ocfs2_dio_end_io, NULL, 0);
mlog_exit(ret);
return ret;
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 6edac85c2b931..4c1fb548ab64d 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -3057,10 +3057,25 @@ static ssize_t reiserfs_direct_IO(int rw, struct kiocb *iocb,
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs,
reiserfs_get_blocks_direct_io, NULL);
+
+ /*
+ * In case of error extending write may have instantiated a few
+ * blocks outside i_size. Trim these off again.
+ */
+ if (unlikely((rw & WRITE) && ret < 0)) {
+ loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
+ if (end > isize)
+ vmtruncate(inode, isize);
+ }
+
+ return ret;
}
int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index d24e78f32f3e3..7968d41e27ada 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1478,17 +1478,17 @@ xfs_vm_direct_IO(
if (rw & WRITE) {
iocb->private = xfs_alloc_ioend(inode, IO_NEW);
- ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
- offset, nr_segs,
- xfs_get_blocks_direct,
- xfs_end_io_direct_write);
+ ret = __blockdev_direct_IO(rw, iocb, inode, bdev, iov,
+ offset, nr_segs,
+ xfs_get_blocks_direct,
+ xfs_end_io_direct_write, NULL, 0);
if (ret != -EIOCBQUEUED && iocb->private)
xfs_destroy_ioend(iocb->private);
} else {
- ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
- offset, nr_segs,
- xfs_get_blocks_direct,
- NULL);
+ ret = __blockdev_direct_IO(rw, iocb, inode, bdev, iov,
+ offset, nr_segs,
+ xfs_get_blocks_direct,
+ NULL, NULL, 0);
}
return ret;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index f91affb7d5308..b347b2d5666fe 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2269,16 +2269,6 @@ static inline int xip_truncate_page(struct address_space *mapping, loff_t from)
struct bio;
typedef void (dio_submit_t)(int rw, struct bio *bio, struct inode *inode,
loff_t file_offset);
-void dio_end_io(struct bio *bio, int error);
-
-ssize_t __blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
- struct block_device *bdev, const struct iovec *iov, loff_t offset,
- unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- dio_submit_t submit_io, int lock_type);
-ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
- struct block_device *bdev, const struct iovec *iov, loff_t offset,
- unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- dio_submit_t submit_io, int lock_type);
enum {
/* need locking between buffered and direct access */
@@ -2288,24 +2278,13 @@ enum {
DIO_SKIP_HOLES = 0x02,
};
-static inline ssize_t blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb,
- struct inode *inode, struct block_device *bdev, const struct iovec *iov,
- loff_t offset, unsigned long nr_segs, get_block_t get_block,
- dio_iodone_t end_io)
-{
- return __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, NULL,
- DIO_LOCKING | DIO_SKIP_HOLES);
-}
+void dio_end_io(struct bio *bio, int error);
+
+ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+ struct block_device *bdev, const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
+ dio_submit_t submit_io, int flags);
-static inline ssize_t blockdev_direct_IO_no_locking_newtrunc(int rw, struct kiocb *iocb,
- struct inode *inode, struct block_device *bdev, const struct iovec *iov,
- loff_t offset, unsigned long nr_segs, get_block_t get_block,
- dio_iodone_t end_io)
-{
- return __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, NULL, 0);
-}
static inline ssize_t blockdev_direct_IO(int rw, struct kiocb *iocb,
struct inode *inode, struct block_device *bdev, const struct iovec *iov,
loff_t offset, unsigned long nr_segs, get_block_t get_block,
@@ -2315,15 +2294,6 @@ static inline ssize_t blockdev_direct_IO(int rw, struct kiocb *iocb,
nr_segs, get_block, end_io, NULL,
DIO_LOCKING | DIO_SKIP_HOLES);
}
-
-static inline ssize_t blockdev_direct_IO_no_locking(int rw, struct kiocb *iocb,
- struct inode *inode, struct block_device *bdev, const struct iovec *iov,
- loff_t offset, unsigned long nr_segs, get_block_t get_block,
- dio_iodone_t end_io)
-{
- return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, NULL, 0);
-}
#endif
extern const struct file_operations generic_ro_fops;
--
GitLab
From ea0f04e59543bafb3d2cbe37a0d375acb0bb2c34 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:29:54 +0200
Subject: [PATCH 547/863] get rid of nobh_write_begin_newtrunc
Move the call to vmtruncate to get rid of accessive blocks to the only
remaining caller and rename the non-truncating version to nobh_write_begin.
Get rid of the superflous file argument to it while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/buffer.c | 37 ++++---------------------------------
fs/ext2/inode.c | 9 ++-------
fs/jfs/inode.c | 11 ++++++++++-
include/linux/buffer_head.h | 6 +-----
4 files changed, 17 insertions(+), 46 deletions(-)
diff --git a/fs/buffer.c b/fs/buffer.c
index d54812b198e9d..559daf76bca44 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2510,11 +2510,11 @@ static void attach_nobh_buffers(struct page *page, struct buffer_head *head)
}
/*
- * Filesystems implementing the new truncate sequence should use the
- * _newtrunc postfix variant which won't incorrectly call vmtruncate.
+ * On entry, the page is fully not uptodate.
+ * On exit the page is fully uptodate in the areas outside (from,to)
* The filesystem needs to handle block truncation upon failure.
*/
-int nobh_write_begin_newtrunc(struct file *file, struct address_space *mapping,
+int nobh_write_begin(struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
get_block_t *get_block)
@@ -2547,7 +2547,7 @@ int nobh_write_begin_newtrunc(struct file *file, struct address_space *mapping,
unlock_page(page);
page_cache_release(page);
*pagep = NULL;
- return block_write_begin_newtrunc(file, mapping, pos, len,
+ return block_write_begin_newtrunc(NULL, mapping, pos, len,
flags, pagep, fsdata, get_block);
}
@@ -2654,35 +2654,6 @@ int nobh_write_begin_newtrunc(struct file *file, struct address_space *mapping,
return ret;
}
-EXPORT_SYMBOL(nobh_write_begin_newtrunc);
-
-/*
- * On entry, the page is fully not uptodate.
- * On exit the page is fully uptodate in the areas outside (from,to)
- */
-int nobh_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata,
- get_block_t *get_block)
-{
- int ret;
-
- ret = nobh_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, get_block);
-
- /*
- * prepare_write() may have instantiated a few blocks
- * outside i_size. Trim these off again. Don't need
- * i_size_read because we hold i_mutex.
- */
- if (unlikely(ret)) {
- loff_t isize = mapping->host->i_size;
- if (pos + len > isize)
- vmtruncate(mapping->host, isize);
- }
-
- return ret;
-}
EXPORT_SYMBOL(nobh_write_begin);
int nobh_write_end(struct file *file, struct address_space *mapping,
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index f36e967e4fde3..348805cd41092 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -806,13 +806,8 @@ ext2_nobh_write_begin(struct file *file, struct address_space *mapping,
{
int ret;
- /*
- * Dir-in-pagecache still uses ext2_write_begin. Would have to rework
- * directory handling code to pass around offsets rather than struct
- * pages in order to make this work easily.
- */
- ret = nobh_write_begin_newtrunc(file, mapping, pos, len, flags, pagep,
- fsdata, ext2_get_block);
+ ret = nobh_write_begin(mapping, pos, len, flags, pagep, fsdata,
+ ext2_get_block);
if (ret < 0)
ext2_write_failed(mapping, pos + len);
return ret;
diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c
index 79e6cda28181c..c38dc1806281e 100644
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -303,8 +303,17 @@ static int jfs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- return nobh_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ int ret;
+
+ ret = nobh_write_begin(mapping, pos, len, flags, pagep, fsdata,
jfs_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t jfs_bmap(struct address_space *mapping, sector_t block)
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 1b9ba193b7893..cfda5f0b2a4b1 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -231,11 +231,7 @@ void block_sync_page(struct page *);
sector_t generic_block_bmap(struct address_space *, sector_t, get_block_t *);
int block_truncate_page(struct address_space *, loff_t, get_block_t *);
int file_fsync(struct file *, int);
-int nobh_write_begin_newtrunc(struct file *, struct address_space *,
- loff_t, unsigned, unsigned,
- struct page **, void **, get_block_t*);
-int nobh_write_begin(struct file *, struct address_space *,
- loff_t, unsigned, unsigned,
+int nobh_write_begin(struct address_space *, loff_t, unsigned, unsigned,
struct page **, void **, get_block_t*);
int nobh_write_end(struct file *, struct address_space *,
loff_t, unsigned, unsigned,
--
GitLab
From 282dc178849882289d30e58b54be6b2799b351aa Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:29:55 +0200
Subject: [PATCH 548/863] get rid of cont_write_begin_newtrunc
Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to cont_write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/adfs/inode.c | 11 ++++++++++-
fs/affs/file.c | 11 ++++++++++-
fs/buffer.c | 21 +--------------------
fs/fat/inode.c | 2 +-
fs/hfs/inode.c | 11 ++++++++++-
fs/hfsplus/inode.c | 11 ++++++++++-
fs/hpfs/file.c | 11 ++++++++++-
fs/qnx4/inode.c | 11 ++++++++++-
include/linux/buffer_head.h | 3 ---
9 files changed, 62 insertions(+), 30 deletions(-)
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index 6f850b06ab625..b3dec193036bd 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -50,10 +50,19 @@ static int adfs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
adfs_get_block,
&ADFS_I(mapping->host)->mmu_private);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t _adfs_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/affs/file.c b/fs/affs/file.c
index 322710c3eedf2..c4a9875bd1a60 100644
--- a/fs/affs/file.c
+++ b/fs/affs/file.c
@@ -406,10 +406,19 @@ static int affs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
affs_get_block,
&AFFS_I(mapping->host)->mmu_private);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t _affs_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/buffer.c b/fs/buffer.c
index 559daf76bca44..14529ec759b96 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2351,7 +2351,7 @@ static int cont_expand_zero(struct file *file, struct address_space *mapping,
* For moronic filesystems that do not allow holes in file.
* We may have to extend the file.
*/
-int cont_write_begin_newtrunc(struct file *file, struct address_space *mapping,
+int cont_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
get_block_t *get_block, loff_t *bytes)
@@ -2377,25 +2377,6 @@ int cont_write_begin_newtrunc(struct file *file, struct address_space *mapping,
out:
return err;
}
-EXPORT_SYMBOL(cont_write_begin_newtrunc);
-
-int cont_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata,
- get_block_t *get_block, loff_t *bytes)
-{
- int ret;
-
- ret = cont_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, get_block, bytes);
- if (unlikely(ret)) {
- loff_t isize = mapping->host->i_size;
- if (pos + len > isize)
- vmtruncate(mapping->host, isize);
- }
-
- return ret;
-}
EXPORT_SYMBOL(cont_write_begin);
int block_prepare_write(struct page *page, unsigned from, unsigned to,
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index ffe7c6fdc1ecd..ec6a699a4023d 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -159,7 +159,7 @@ static int fat_write_begin(struct file *file, struct address_space *mapping,
int err;
*pagep = NULL;
- err = cont_write_begin_newtrunc(file, mapping, pos, len, flags,
+ err = cont_write_begin(file, mapping, pos, len, flags,
pagep, fsdata, fat_get_block,
&MSDOS_I(mapping->host)->mmu_private);
if (err < 0)
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 07b2464b5716a..8df18e63eb6b1 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -39,10 +39,19 @@ static int hfs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
hfs_get_block,
&HFS_I(mapping->host)->phys_size);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t hfs_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 4860217739111..88bf1b5626413 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -31,10 +31,19 @@ static int hfsplus_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
hfsplus_get_block,
&HFSPLUS_I(mapping->host).phys_size);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t hfsplus_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index a9ae9bfa752f5..c0340887c7ea6 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -97,10 +97,19 @@ static int hpfs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
hpfs_get_block,
&hpfs_i(mapping->host)->mmu_private);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t _hpfs_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index 277575ddc05cb..16829722be936 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -320,10 +320,19 @@ static int qnx4_write_begin(struct file *file, struct address_space *mapping,
struct page **pagep, void **fsdata)
{
struct qnx4_inode_info *qnx4_inode = qnx4_i(mapping->host);
+ int ret;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
qnx4_get_block,
&qnx4_inode->mmu_private);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t qnx4_bmap(struct address_space *mapping, sector_t block)
{
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index cfda5f0b2a4b1..7638647f0424a 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -217,9 +217,6 @@ int generic_write_end(struct file *, struct address_space *,
struct page *, void *);
void page_zero_new_buffers(struct page *page, unsigned from, unsigned to);
int block_prepare_write(struct page*, unsigned, unsigned, get_block_t*);
-int cont_write_begin_newtrunc(struct file *, struct address_space *, loff_t,
- unsigned, unsigned, struct page **, void **,
- get_block_t *, loff_t *);
int cont_write_begin(struct file *, struct address_space *, loff_t,
unsigned, unsigned, struct page **, void **,
get_block_t *, loff_t *);
--
GitLab
From f4e420dc423148fba637af1ab618fa8896dfb2d6 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:29:56 +0200
Subject: [PATCH 549/863] clean up write_begin usage for directories in
pagecache
For filesystem that implement directories in pagecache we call
block_write_begin with an already allocated page for this code, while the
normal regular file write path uses the default block_write_begin behaviour.
Get rid of the __foofs_write_begin helper and opencode the normal write_begin
call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for
the directory code. The added benefit is that foofs_prepare_chunk has
a much saner calling convention.
Note that the interruptible flag passed into block_write_begin is always
ignored if we already pass in a page (see next patch for details), and
we never were doing truncations of exessive blocks for this case either so we
can switch directly to block_write_begin_newtrunc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ext2/dir.c | 24 ++++++++++++------------
fs/ext2/ext2.h | 3 ---
fs/ext2/inode.c | 11 ++---------
fs/minix/dir.c | 21 +++++++--------------
fs/minix/inode.c | 11 +++++------
fs/minix/minix.h | 4 +---
fs/nilfs2/dir.c | 26 +++++++-------------------
fs/sysv/dir.c | 21 +++++++--------------
fs/sysv/itree.c | 11 +++++------
fs/sysv/sysv.h | 4 +---
fs/ufs/dir.c | 13 ++++---------
fs/ufs/inode.c | 11 +++++------
fs/ufs/util.h | 4 +---
13 files changed, 57 insertions(+), 107 deletions(-)
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 7516957273ed7..6b946bae11cfa 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -448,6 +448,12 @@ ino_t ext2_inode_by_name(struct inode *dir, struct qstr *child)
return res;
}
+static int ext2_prepare_chunk(struct page *page, loff_t pos, unsigned len)
+{
+ return block_write_begin_newtrunc(NULL, page->mapping, pos, len, 0,
+ &page, NULL, ext2_get_block);
+}
+
/* Releases the page */
void ext2_set_link(struct inode *dir, struct ext2_dir_entry_2 *de,
struct page *page, struct inode *inode, int update_times)
@@ -458,8 +464,7 @@ void ext2_set_link(struct inode *dir, struct ext2_dir_entry_2 *de,
int err;
lock_page(page);
- err = __ext2_write_begin(NULL, page->mapping, pos, len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ext2_prepare_chunk(page, pos, len);
BUG_ON(err);
de->inode = cpu_to_le32(inode->i_ino);
ext2_set_de_type(de, inode);
@@ -542,8 +547,7 @@ int ext2_add_link (struct dentry *dentry, struct inode *inode)
got_it:
pos = page_offset(page) +
(char*)de - (char*)page_address(page);
- err = __ext2_write_begin(NULL, page->mapping, pos, rec_len, 0,
- &page, NULL);
+ err = ext2_prepare_chunk(page, pos, rec_len);
if (err)
goto out_unlock;
if (de->inode) {
@@ -576,8 +580,7 @@ int ext2_add_link (struct dentry *dentry, struct inode *inode)
*/
int ext2_delete_entry (struct ext2_dir_entry_2 * dir, struct page * page )
{
- struct address_space *mapping = page->mapping;
- struct inode *inode = mapping->host;
+ struct inode *inode = page->mapping->host;
char *kaddr = page_address(page);
unsigned from = ((char*)dir - kaddr) & ~(ext2_chunk_size(inode)-1);
unsigned to = ((char *)dir - kaddr) +
@@ -601,8 +604,7 @@ int ext2_delete_entry (struct ext2_dir_entry_2 * dir, struct page * page )
from = (char*)pde - (char*)page_address(page);
pos = page_offset(page) + from;
lock_page(page);
- err = __ext2_write_begin(NULL, page->mapping, pos, to - from, 0,
- &page, NULL);
+ err = ext2_prepare_chunk(page, pos, to - from);
BUG_ON(err);
if (pde)
pde->rec_len = ext2_rec_len_to_disk(to - from);
@@ -621,8 +623,7 @@ int ext2_delete_entry (struct ext2_dir_entry_2 * dir, struct page * page )
*/
int ext2_make_empty(struct inode *inode, struct inode *parent)
{
- struct address_space *mapping = inode->i_mapping;
- struct page *page = grab_cache_page(mapping, 0);
+ struct page *page = grab_cache_page(inode->i_mapping, 0);
unsigned chunk_size = ext2_chunk_size(inode);
struct ext2_dir_entry_2 * de;
int err;
@@ -631,8 +632,7 @@ int ext2_make_empty(struct inode *inode, struct inode *parent)
if (!page)
return -ENOMEM;
- err = __ext2_write_begin(NULL, page->mapping, 0, chunk_size, 0,
- &page, NULL);
+ err = ext2_prepare_chunk(page, 0, chunk_size);
if (err) {
unlock_page(page);
goto fail;
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 52b34f1d27383..8f53d11bf9578 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -127,9 +127,6 @@ extern void ext2_set_inode_flags(struct inode *inode);
extern void ext2_get_inode_flags(struct ext2_inode_info *);
extern int ext2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
u64 start, u64 len);
-int __ext2_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata);
/* ioctl.c */
extern long ext2_ioctl(struct file *, unsigned int, unsigned long);
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 348805cd41092..2f4dfbcd76964 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -765,14 +765,6 @@ ext2_readpages(struct file *file, struct address_space *mapping,
return mpage_readpages(mapping, pages, nr_pages, ext2_get_block);
}
-int __ext2_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
-{
- return block_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, ext2_get_block);
-}
-
static int
ext2_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
@@ -781,7 +773,8 @@ ext2_write_begin(struct file *file, struct address_space *mapping,
int ret;
*pagep = NULL;
- ret = __ext2_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ ret = block_write_begin_newtrunc(file, mapping, pos, len, flags,
+ pagep, fsdata, ext2_get_block);
if (ret < 0)
ext2_write_failed(mapping, pos + len);
return ret;
diff --git a/fs/minix/dir.c b/fs/minix/dir.c
index 1dbf921ca44b4..085a9262c6926 100644
--- a/fs/minix/dir.c
+++ b/fs/minix/dir.c
@@ -271,8 +271,7 @@ int minix_add_link(struct dentry *dentry, struct inode *inode)
got_it:
pos = page_offset(page) + p - (char *)page_address(page);
- err = __minix_write_begin(NULL, page->mapping, pos, sbi->s_dirsize,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = minix_prepare_chunk(page, pos, sbi->s_dirsize);
if (err)
goto out_unlock;
memcpy (namx, name, namelen);
@@ -297,8 +296,7 @@ int minix_add_link(struct dentry *dentry, struct inode *inode)
int minix_delete_entry(struct minix_dir_entry *de, struct page *page)
{
- struct address_space *mapping = page->mapping;
- struct inode *inode = (struct inode*)mapping->host;
+ struct inode *inode = page->mapping->host;
char *kaddr = page_address(page);
loff_t pos = page_offset(page) + (char*)de - kaddr;
struct minix_sb_info *sbi = minix_sb(inode->i_sb);
@@ -306,8 +304,7 @@ int minix_delete_entry(struct minix_dir_entry *de, struct page *page)
int err;
lock_page(page);
- err = __minix_write_begin(NULL, mapping, pos, len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = minix_prepare_chunk(page, pos, len);
if (err == 0) {
if (sbi->s_version == MINIX_V3)
((minix3_dirent *) de)->inode = 0;
@@ -325,16 +322,14 @@ int minix_delete_entry(struct minix_dir_entry *de, struct page *page)
int minix_make_empty(struct inode *inode, struct inode *dir)
{
- struct address_space *mapping = inode->i_mapping;
- struct page *page = grab_cache_page(mapping, 0);
+ struct page *page = grab_cache_page(inode->i_mapping, 0);
struct minix_sb_info *sbi = minix_sb(inode->i_sb);
char *kaddr;
int err;
if (!page)
return -ENOMEM;
- err = __minix_write_begin(NULL, mapping, 0, 2 * sbi->s_dirsize,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = minix_prepare_chunk(page, 0, 2 * sbi->s_dirsize);
if (err) {
unlock_page(page);
goto fail;
@@ -425,8 +420,7 @@ int minix_empty_dir(struct inode * inode)
void minix_set_link(struct minix_dir_entry *de, struct page *page,
struct inode *inode)
{
- struct address_space *mapping = page->mapping;
- struct inode *dir = mapping->host;
+ struct inode *dir = page->mapping->host;
struct minix_sb_info *sbi = minix_sb(dir->i_sb);
loff_t pos = page_offset(page) +
(char *)de-(char*)page_address(page);
@@ -434,8 +428,7 @@ void minix_set_link(struct minix_dir_entry *de, struct page *page,
lock_page(page);
- err = __minix_write_begin(NULL, mapping, pos, sbi->s_dirsize,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = minix_prepare_chunk(page, pos, sbi->s_dirsize);
if (err == 0) {
if (sbi->s_version == MINIX_V3)
((minix3_dirent *) de)->inode = inode->i_ino;
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 756f8c93780ca..f4abe45229bbc 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -357,12 +357,10 @@ static int minix_readpage(struct file *file, struct page *page)
return block_read_full_page(page,minix_get_block);
}
-int __minix_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
+int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- minix_get_block);
+ return block_write_begin_newtrunc(NULL, page->mapping, pos, len, 0,
+ &page, NULL, minix_get_block);
}
static int minix_write_begin(struct file *file, struct address_space *mapping,
@@ -370,7 +368,8 @@ static int minix_write_begin(struct file *file, struct address_space *mapping,
struct page **pagep, void **fsdata)
{
*pagep = NULL;
- return __minix_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ minix_get_block);
}
static sector_t minix_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index 111f34ee9e3b0..407b1c84911e9 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -53,9 +53,7 @@ extern int minix_new_block(struct inode * inode);
extern void minix_free_block(struct inode *inode, unsigned long block);
extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi);
extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-extern int __minix_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata);
+extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len);
extern void V1_minix_truncate(struct inode *);
extern void V2_minix_truncate(struct inode *);
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 85c89dfc71f09..fc2bcfa599a35 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -80,23 +80,11 @@ static unsigned nilfs_last_byte(struct inode *inode, unsigned long page_nr)
return last_byte;
}
-static int nilfs_prepare_chunk_uninterruptible(struct page *page,
- struct address_space *mapping,
- unsigned from, unsigned to)
+static int nilfs_prepare_chunk(struct page *page, unsigned from, unsigned to)
{
loff_t pos = page_offset(page) + from;
- return block_write_begin(NULL, mapping, pos, to - from,
- AOP_FLAG_UNINTERRUPTIBLE, &page,
- NULL, nilfs_get_block);
-}
-
-static int nilfs_prepare_chunk(struct page *page,
- struct address_space *mapping,
- unsigned from, unsigned to)
-{
- loff_t pos = page_offset(page) + from;
- return block_write_begin(NULL, mapping, pos, to - from, 0, &page,
- NULL, nilfs_get_block);
+ return block_write_begin_newtrunc(NULL, page->mapping, pos, to - from,
+ 0, &page, NULL, nilfs_get_block);
}
static void nilfs_commit_chunk(struct page *page,
@@ -449,7 +437,7 @@ void nilfs_set_link(struct inode *dir, struct nilfs_dir_entry *de,
int err;
lock_page(page);
- err = nilfs_prepare_chunk_uninterruptible(page, mapping, from, to);
+ err = nilfs_prepare_chunk(page, from, to);
BUG_ON(err);
de->inode = cpu_to_le64(inode->i_ino);
nilfs_set_de_type(de, inode);
@@ -530,7 +518,7 @@ int nilfs_add_link(struct dentry *dentry, struct inode *inode)
got_it:
from = (char *)de - (char *)page_address(page);
to = from + rec_len;
- err = nilfs_prepare_chunk(page, page->mapping, from, to);
+ err = nilfs_prepare_chunk(page, from, to);
if (err)
goto out_unlock;
if (de->inode) {
@@ -587,7 +575,7 @@ int nilfs_delete_entry(struct nilfs_dir_entry *dir, struct page *page)
if (pde)
from = (char *)pde - (char *)page_address(page);
lock_page(page);
- err = nilfs_prepare_chunk(page, mapping, from, to);
+ err = nilfs_prepare_chunk(page, from, to);
BUG_ON(err);
if (pde)
pde->rec_len = cpu_to_le16(to - from);
@@ -615,7 +603,7 @@ int nilfs_make_empty(struct inode *inode, struct inode *parent)
if (!page)
return -ENOMEM;
- err = nilfs_prepare_chunk(page, mapping, 0, chunk_size);
+ err = nilfs_prepare_chunk(page, 0, chunk_size);
if (unlikely(err)) {
unlock_page(page);
goto fail;
diff --git a/fs/sysv/dir.c b/fs/sysv/dir.c
index 79941e4964a4e..a77c421576209 100644
--- a/fs/sysv/dir.c
+++ b/fs/sysv/dir.c
@@ -218,8 +218,7 @@ int sysv_add_link(struct dentry *dentry, struct inode *inode)
pos = page_offset(page) +
(char*)de - (char*)page_address(page);
lock_page(page);
- err = __sysv_write_begin(NULL, page->mapping, pos, SYSV_DIRSIZE,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = sysv_prepare_chunk(page, pos, SYSV_DIRSIZE);
if (err)
goto out_unlock;
memcpy (de->name, name, namelen);
@@ -239,15 +238,13 @@ int sysv_add_link(struct dentry *dentry, struct inode *inode)
int sysv_delete_entry(struct sysv_dir_entry *de, struct page *page)
{
- struct address_space *mapping = page->mapping;
- struct inode *inode = (struct inode*)mapping->host;
+ struct inode *inode = page->mapping->host;
char *kaddr = (char*)page_address(page);
loff_t pos = page_offset(page) + (char *)de - kaddr;
int err;
lock_page(page);
- err = __sysv_write_begin(NULL, mapping, pos, SYSV_DIRSIZE,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = sysv_prepare_chunk(page, pos, SYSV_DIRSIZE);
BUG_ON(err);
de->inode = 0;
err = dir_commit_chunk(page, pos, SYSV_DIRSIZE);
@@ -259,16 +256,14 @@ int sysv_delete_entry(struct sysv_dir_entry *de, struct page *page)
int sysv_make_empty(struct inode *inode, struct inode *dir)
{
- struct address_space *mapping = inode->i_mapping;
- struct page *page = grab_cache_page(mapping, 0);
+ struct page *page = grab_cache_page(inode->i_mapping, 0);
struct sysv_dir_entry * de;
char *base;
int err;
if (!page)
return -ENOMEM;
- err = __sysv_write_begin(NULL, mapping, 0, 2 * SYSV_DIRSIZE,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = sysv_prepare_chunk(page, 0, 2 * SYSV_DIRSIZE);
if (err) {
unlock_page(page);
goto fail;
@@ -341,15 +336,13 @@ int sysv_empty_dir(struct inode * inode)
void sysv_set_link(struct sysv_dir_entry *de, struct page *page,
struct inode *inode)
{
- struct address_space *mapping = page->mapping;
- struct inode *dir = mapping->host;
+ struct inode *dir = page->mapping->host;
loff_t pos = page_offset(page) +
(char *)de-(char*)page_address(page);
int err;
lock_page(page);
- err = __sysv_write_begin(NULL, mapping, pos, SYSV_DIRSIZE,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = sysv_prepare_chunk(page, pos, SYSV_DIRSIZE);
BUG_ON(err);
de->inode = cpu_to_fs16(SYSV_SB(inode->i_sb), inode->i_ino);
err = dir_commit_chunk(page, pos, SYSV_DIRSIZE);
diff --git a/fs/sysv/itree.c b/fs/sysv/itree.c
index f042eec464c2d..4068f485cfd6a 100644
--- a/fs/sysv/itree.c
+++ b/fs/sysv/itree.c
@@ -459,12 +459,10 @@ static int sysv_readpage(struct file *file, struct page *page)
return block_read_full_page(page,get_block);
}
-int __sysv_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
+int sysv_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- get_block);
+ return block_write_begin_newtrunc(NULL, page->mapping, pos, len, 0,
+ &page, NULL, get_block);
}
static int sysv_write_begin(struct file *file, struct address_space *mapping,
@@ -472,7 +470,8 @@ static int sysv_write_begin(struct file *file, struct address_space *mapping,
struct page **pagep, void **fsdata)
{
*pagep = NULL;
- return __sysv_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ get_block);
}
static sector_t sysv_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/sysv/sysv.h b/fs/sysv/sysv.h
index 94cb9b4d76c28..bb55cdb394bfa 100644
--- a/fs/sysv/sysv.h
+++ b/fs/sysv/sysv.h
@@ -136,9 +136,7 @@ extern unsigned long sysv_count_free_blocks(struct super_block *);
/* itree.c */
extern void sysv_truncate(struct inode *);
-extern int __sysv_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata);
+extern int sysv_prepare_chunk(struct page *page, loff_t pos, unsigned len);
/* inode.c */
extern struct inode *sysv_iget(struct super_block *, unsigned int);
diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index ec784756dc659..dbc90994715a1 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -95,8 +95,7 @@ void ufs_set_link(struct inode *dir, struct ufs_dir_entry *de,
int err;
lock_page(page);
- err = __ufs_write_begin(NULL, page->mapping, pos, len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ufs_prepare_chunk(page, pos, len);
BUG_ON(err);
de->d_ino = cpu_to_fs32(dir->i_sb, inode->i_ino);
@@ -381,8 +380,7 @@ int ufs_add_link(struct dentry *dentry, struct inode *inode)
got_it:
pos = page_offset(page) +
(char*)de - (char*)page_address(page);
- err = __ufs_write_begin(NULL, page->mapping, pos, rec_len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ufs_prepare_chunk(page, pos, rec_len);
if (err)
goto out_unlock;
if (de->d_ino) {
@@ -518,7 +516,6 @@ int ufs_delete_entry(struct inode *inode, struct ufs_dir_entry *dir,
struct page * page)
{
struct super_block *sb = inode->i_sb;
- struct address_space *mapping = page->mapping;
char *kaddr = page_address(page);
unsigned from = ((char*)dir - kaddr) & ~(UFS_SB(sb)->s_uspi->s_dirblksize - 1);
unsigned to = ((char*)dir - kaddr) + fs16_to_cpu(sb, dir->d_reclen);
@@ -549,8 +546,7 @@ int ufs_delete_entry(struct inode *inode, struct ufs_dir_entry *dir,
pos = page_offset(page) + from;
lock_page(page);
- err = __ufs_write_begin(NULL, mapping, pos, to - from,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ufs_prepare_chunk(page, pos, to - from);
BUG_ON(err);
if (pde)
pde->d_reclen = cpu_to_fs16(sb, to - from);
@@ -577,8 +573,7 @@ int ufs_make_empty(struct inode * inode, struct inode *dir)
if (!page)
return -ENOMEM;
- err = __ufs_write_begin(NULL, mapping, 0, chunk_size,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = ufs_prepare_chunk(page, 0, chunk_size);
if (err) {
unlock_page(page);
goto fail;
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 73fe773aa0341..a9555b1ffd286 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -558,12 +558,10 @@ static int ufs_readpage(struct file *file, struct page *page)
return block_read_full_page(page,ufs_getfrag_block);
}
-int __ufs_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
+int ufs_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ufs_getfrag_block);
+ return block_write_begin_newtrunc(NULL, page->mapping, pos, len, 0,
+ &page, NULL, ufs_getfrag_block);
}
static int ufs_write_begin(struct file *file, struct address_space *mapping,
@@ -571,7 +569,8 @@ static int ufs_write_begin(struct file *file, struct address_space *mapping,
struct page **pagep, void **fsdata)
{
*pagep = NULL;
- return __ufs_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ ufs_getfrag_block);
}
static sector_t ufs_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/ufs/util.h b/fs/ufs/util.h
index 23ceed8c8fb9d..0466036912f1a 100644
--- a/fs/ufs/util.h
+++ b/fs/ufs/util.h
@@ -257,9 +257,7 @@ ufs_set_inode_gid(struct super_block *sb, struct ufs_inode *inode, u32 value)
extern dev_t ufs_get_inode_dev(struct super_block *, struct ufs_inode_info *);
extern void ufs_set_inode_dev(struct super_block *, struct ufs_inode_info *, dev_t);
-extern int __ufs_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata);
+extern int ufs_prepare_chunk(struct page *page, loff_t pos, unsigned len);
/*
* These functions manipulate ufs buffers
--
GitLab
From 6e1db88d536adcbbfe562b2d4b7d6425784fff12 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:29:57 +0200
Subject: [PATCH 550/863] introduce __block_write_begin
Split up the block_write_begin implementation - __block_write_begin is a new
trivial wrapper for block_prepare_write that always takes an already
allocated page and can be either called from block_write_begin or filesystem
code that already has a page allocated. Remove the handling of already
allocated pages from block_write_begin after switching all callers that
do it to __block_write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/buffer.c | 69 ++++++++++++++-----------------------
fs/ext2/dir.c | 3 +-
fs/ext3/inode.c | 3 +-
fs/ext4/inode.c | 11 +++---
fs/minix/inode.c | 3 +-
fs/nilfs2/dir.c | 3 +-
fs/reiserfs/inode.c | 3 +-
fs/sysv/itree.c | 3 +-
fs/ufs/inode.c | 3 +-
include/linux/buffer_head.h | 2 ++
10 files changed, 39 insertions(+), 64 deletions(-)
diff --git a/fs/buffer.c b/fs/buffer.c
index 14529ec759b96..c319c49da5118 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1833,9 +1833,10 @@ void page_zero_new_buffers(struct page *page, unsigned from, unsigned to)
}
EXPORT_SYMBOL(page_zero_new_buffers);
-static int __block_prepare_write(struct inode *inode, struct page *page,
- unsigned from, unsigned to, get_block_t *get_block)
+int block_prepare_write(struct page *page, unsigned from, unsigned to,
+ get_block_t *get_block)
{
+ struct inode *inode = page->mapping->host;
unsigned block_start, block_end;
sector_t block;
int err = 0;
@@ -1908,10 +1909,13 @@ static int __block_prepare_write(struct inode *inode, struct page *page,
if (!buffer_uptodate(*wait_bh))
err = -EIO;
}
- if (unlikely(err))
+ if (unlikely(err)) {
page_zero_new_buffers(page, from, to);
+ ClearPageUptodate(page);
+ }
return err;
}
+EXPORT_SYMBOL(block_prepare_write);
static int __block_commit_write(struct inode *inode, struct page *page,
unsigned from, unsigned to)
@@ -1948,6 +1952,15 @@ static int __block_commit_write(struct inode *inode, struct page *page,
return 0;
}
+int __block_write_begin(struct page *page, loff_t pos, unsigned len,
+ get_block_t *get_block)
+{
+ unsigned start = pos & (PAGE_CACHE_SIZE - 1);
+
+ return block_prepare_write(page, start, start + len, get_block);
+}
+EXPORT_SYMBOL(__block_write_begin);
+
/*
* Filesystems implementing the new truncate sequence should use the
* _newtrunc postfix variant which won't incorrectly call vmtruncate.
@@ -1958,41 +1971,22 @@ int block_write_begin_newtrunc(struct file *file, struct address_space *mapping,
struct page **pagep, void **fsdata,
get_block_t *get_block)
{
- struct inode *inode = mapping->host;
- int status = 0;
+ pgoff_t index = pos >> PAGE_CACHE_SHIFT;
struct page *page;
- pgoff_t index;
- unsigned start, end;
- int ownpage = 0;
+ int status;
- index = pos >> PAGE_CACHE_SHIFT;
- start = pos & (PAGE_CACHE_SIZE - 1);
- end = start + len;
-
- page = *pagep;
- if (page == NULL) {
- ownpage = 1;
- page = grab_cache_page_write_begin(mapping, index, flags);
- if (!page) {
- status = -ENOMEM;
- goto out;
- }
- *pagep = page;
- } else
- BUG_ON(!PageLocked(page));
+ page = grab_cache_page_write_begin(mapping, index, flags);
+ if (!page)
+ return -ENOMEM;
- status = __block_prepare_write(inode, page, start, end, get_block);
+ status = __block_write_begin(page, pos, len, get_block);
if (unlikely(status)) {
- ClearPageUptodate(page);
-
- if (ownpage) {
- unlock_page(page);
- page_cache_release(page);
- *pagep = NULL;
- }
+ unlock_page(page);
+ page_cache_release(page);
+ page = NULL;
}
-out:
+ *pagep = page;
return status;
}
EXPORT_SYMBOL(block_write_begin_newtrunc);
@@ -2379,17 +2373,6 @@ int cont_write_begin(struct file *file, struct address_space *mapping,
}
EXPORT_SYMBOL(cont_write_begin);
-int block_prepare_write(struct page *page, unsigned from, unsigned to,
- get_block_t *get_block)
-{
- struct inode *inode = page->mapping->host;
- int err = __block_prepare_write(inode, page, from, to, get_block);
- if (err)
- ClearPageUptodate(page);
- return err;
-}
-EXPORT_SYMBOL(block_prepare_write);
-
int block_commit_write(struct page *page, unsigned from, unsigned to)
{
struct inode *inode = page->mapping->host;
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 6b946bae11cfa..764109886ec00 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -450,8 +450,7 @@ ino_t ext2_inode_by_name(struct inode *dir, struct qstr *child)
static int ext2_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin_newtrunc(NULL, page->mapping, pos, len, 0,
- &page, NULL, ext2_get_block);
+ return __block_write_begin(page, pos, len, ext2_get_block);
}
/* Releases the page */
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index a66f3fe336722..5c6f07eefa4a0 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1196,8 +1196,7 @@ static int ext3_write_begin(struct file *file, struct address_space *mapping,
ret = PTR_ERR(handle);
goto out;
}
- ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ext3_get_block);
+ ret = __block_write_begin(page, pos, len, ext3_get_block);
if (ret)
goto write_begin_failed;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index d6a7701018a6e..3da3c9646e5e1 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1578,11 +1578,9 @@ static int ext4_write_begin(struct file *file, struct address_space *mapping,
*pagep = page;
if (ext4_should_dioread_nolock(inode))
- ret = block_write_begin(file, mapping, pos, len, flags, pagep,
- fsdata, ext4_get_block_write);
+ ret = __block_write_begin(page, pos, len, ext4_get_block_write);
else
- ret = block_write_begin(file, mapping, pos, len, flags, pagep,
- fsdata, ext4_get_block);
+ ret = __block_write_begin(page, pos, len, ext4_get_block);
if (!ret && ext4_should_journal_data(inode)) {
ret = walk_page_buffers(handle, page_buffers(page),
@@ -1593,7 +1591,7 @@ static int ext4_write_begin(struct file *file, struct address_space *mapping,
unlock_page(page);
page_cache_release(page);
/*
- * block_write_begin may have instantiated a few blocks
+ * __block_write_begin may have instantiated a few blocks
* outside i_size. Trim these off again. Don't need
* i_size_read because we hold i_mutex.
*
@@ -3185,8 +3183,7 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
}
*pagep = page;
- ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ext4_da_get_block_prep);
+ ret = __block_write_begin(page, pos, len, ext4_da_get_block_prep);
if (ret < 0) {
unlock_page(page);
ext4_journal_stop(handle);
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index f4abe45229bbc..6b29e73f0ca64 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -359,8 +359,7 @@ static int minix_readpage(struct file *file, struct page *page)
int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin_newtrunc(NULL, page->mapping, pos, len, 0,
- &page, NULL, minix_get_block);
+ return __block_write_begin(page, pos, len, minix_get_block);
}
static int minix_write_begin(struct file *file, struct address_space *mapping,
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index fc2bcfa599a35..d14e3b94d81fb 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -83,8 +83,7 @@ static unsigned nilfs_last_byte(struct inode *inode, unsigned long page_nr)
static int nilfs_prepare_chunk(struct page *page, unsigned from, unsigned to)
{
loff_t pos = page_offset(page) + from;
- return block_write_begin_newtrunc(NULL, page->mapping, pos, to - from,
- 0, &page, NULL, nilfs_get_block);
+ return __block_write_begin(page, pos, to - from, nilfs_get_block);
}
static void nilfs_commit_chunk(struct page *page,
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 4c1fb548ab64d..045729f5674ac 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -2585,8 +2585,7 @@ static int reiserfs_write_begin(struct file *file,
old_ref = th->t_refcount;
th->t_refcount++;
}
- ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- reiserfs_get_block);
+ ret = __block_write_begin(page, pos, len, reiserfs_get_block);
if (ret && reiserfs_transaction_running(inode->i_sb)) {
struct reiserfs_transaction_handle *th = current->journal_info;
/* this gets a little ugly. If reiserfs_get_block returned an
diff --git a/fs/sysv/itree.c b/fs/sysv/itree.c
index 4068f485cfd6a..82a005c3d7ebd 100644
--- a/fs/sysv/itree.c
+++ b/fs/sysv/itree.c
@@ -461,8 +461,7 @@ static int sysv_readpage(struct file *file, struct page *page)
int sysv_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin_newtrunc(NULL, page->mapping, pos, len, 0,
- &page, NULL, get_block);
+ return __block_write_begin(page, pos, len, get_block);
}
static int sysv_write_begin(struct file *file, struct address_space *mapping,
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index a9555b1ffd286..45ce32391f8f3 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -560,8 +560,7 @@ static int ufs_readpage(struct file *file, struct page *page)
int ufs_prepare_chunk(struct page *page, loff_t pos, unsigned len)
{
- return block_write_begin_newtrunc(NULL, page->mapping, pos, len, 0,
- &page, NULL, ufs_getfrag_block);
+ return __block_write_begin(page, pos, len, ufs_getfrag_block);
}
static int ufs_write_begin(struct file *file, struct address_space *mapping,
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 7638647f0424a..accc9f81bb632 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -209,6 +209,8 @@ int block_write_begin_newtrunc(struct file *, struct address_space *,
int block_write_begin(struct file *, struct address_space *,
loff_t, unsigned, unsigned,
struct page **, void **, get_block_t*);
+int __block_write_begin(struct page *page, loff_t pos, unsigned len,
+ get_block_t *get_block);
int block_write_end(struct file *, struct address_space *,
loff_t, unsigned, unsigned,
struct page *, void *);
--
GitLab
From 155130a4f7848b1aac439cab6bda1a175507c71c Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:29:58 +0200
Subject: [PATCH 551/863] get rid of block_write_begin_newtrunc
Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.
While we're at it also remove several unused arguments to block_write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/bfs/file.c | 14 +++++++--
fs/block_dev.c | 5 ++-
fs/buffer.c | 61 ++++++-------------------------------
fs/ext2/inode.c | 5 ++-
fs/minix/inode.c | 12 ++++++--
fs/nilfs2/inode.c | 12 +++++---
fs/nilfs2/recovery.c | 11 ++++---
fs/omfs/file.c | 14 +++++++--
fs/sysv/itree.c | 13 ++++++--
fs/udf/inode.c | 13 ++++++--
fs/ufs/inode.c | 12 ++++++--
fs/xfs/linux-2.6/xfs_aops.c | 14 +++++++--
include/linux/buffer_head.h | 8 ++---
13 files changed, 103 insertions(+), 91 deletions(-)
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index 88b9a3ff44e4b..8fc2e9c9739dd 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -168,9 +168,17 @@ static int bfs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags,
- pagep, fsdata, bfs_get_block);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
+ bfs_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t bfs_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 65a0c26508e56..63c9d60762051 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -308,9 +308,8 @@ static int blkdev_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, blkdev_get_block);
+ return block_write_begin(mapping, pos, len, flags, pagep,
+ blkdev_get_block);
}
static int blkdev_write_end(struct file *file, struct address_space *mapping,
diff --git a/fs/buffer.c b/fs/buffer.c
index c319c49da5118..50efa339e051f 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1962,14 +1962,13 @@ int __block_write_begin(struct page *page, loff_t pos, unsigned len,
EXPORT_SYMBOL(__block_write_begin);
/*
- * Filesystems implementing the new truncate sequence should use the
- * _newtrunc postfix variant which won't incorrectly call vmtruncate.
+ * block_write_begin takes care of the basic task of block allocation and
+ * bringing partial write blocks uptodate first.
+ *
* The filesystem needs to handle block truncation upon failure.
*/
-int block_write_begin_newtrunc(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata,
- get_block_t *get_block)
+int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
+ unsigned flags, struct page **pagep, get_block_t *get_block)
{
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
struct page *page;
@@ -1989,44 +1988,6 @@ int block_write_begin_newtrunc(struct file *file, struct address_space *mapping,
*pagep = page;
return status;
}
-EXPORT_SYMBOL(block_write_begin_newtrunc);
-
-/*
- * block_write_begin takes care of the basic task of block allocation and
- * bringing partial write blocks uptodate first.
- *
- * If *pagep is not NULL, then block_write_begin uses the locked page
- * at *pagep rather than allocating its own. In this case, the page will
- * not be unlocked or deallocated on failure.
- */
-int block_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata,
- get_block_t *get_block)
-{
- int ret;
-
- ret = block_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, get_block);
-
- /*
- * prepare_write() may have instantiated a few blocks
- * outside i_size. Trim these off again. Don't need
- * i_size_read because we hold i_mutex.
- *
- * Filesystems which pass down their own page also cannot
- * call into vmtruncate here because it would lead to lock
- * inversion problems (*pagep is locked). This is a further
- * example of where the old truncate sequence is inadequate.
- */
- if (unlikely(ret) && *pagep == NULL) {
- loff_t isize = mapping->host->i_size;
- if (pos + len > isize)
- vmtruncate(mapping->host, isize);
- }
-
- return ret;
-}
EXPORT_SYMBOL(block_write_begin);
int block_write_end(struct file *file, struct address_space *mapping,
@@ -2357,7 +2318,7 @@ int cont_write_begin(struct file *file, struct address_space *mapping,
err = cont_expand_zero(file, mapping, pos, bytes);
if (err)
- goto out;
+ return err;
zerofrom = *bytes & ~PAGE_CACHE_MASK;
if (pos+len > *bytes && zerofrom & (blocksize-1)) {
@@ -2365,11 +2326,7 @@ int cont_write_begin(struct file *file, struct address_space *mapping,
(*bytes)++;
}
- *pagep = NULL;
- err = block_write_begin_newtrunc(file, mapping, pos, len,
- flags, pagep, fsdata, get_block);
-out:
- return err;
+ return block_write_begin(mapping, pos, len, flags, pagep, get_block);
}
EXPORT_SYMBOL(cont_write_begin);
@@ -2511,8 +2468,8 @@ int nobh_write_begin(struct address_space *mapping,
unlock_page(page);
page_cache_release(page);
*pagep = NULL;
- return block_write_begin_newtrunc(NULL, mapping, pos, len,
- flags, pagep, fsdata, get_block);
+ return block_write_begin(mapping, pos, len, flags, pagep,
+ get_block);
}
if (PageMappedToDisk(page))
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 2f4dfbcd76964..74dfe5f73330e 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -772,9 +772,8 @@ ext2_write_begin(struct file *file, struct address_space *mapping,
{
int ret;
- *pagep = NULL;
- ret = block_write_begin_newtrunc(file, mapping, pos, len, flags,
- pagep, fsdata, ext2_get_block);
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
+ ext2_get_block);
if (ret < 0)
ext2_write_failed(mapping, pos + len);
return ret;
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 6b29e73f0ca64..125062f55ef2d 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -366,9 +366,17 @@ static int minix_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
minix_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t minix_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 1dd9e6a7d787f..5c694ece172ef 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -197,11 +197,15 @@ static int nilfs_write_begin(struct file *file, struct address_space *mapping,
if (unlikely(err))
return err;
- *pagep = NULL;
- err = block_write_begin(file, mapping, pos, len, flags, pagep,
- fsdata, nilfs_get_block);
- if (unlikely(err))
+ err = block_write_begin(mapping, pos, len, flags, pagep,
+ nilfs_get_block);
+ if (unlikely(err)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+
nilfs_transaction_abort(inode->i_sb);
+ }
return err;
}
diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index bae2a516b4ee0..2f11f0868d877 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -505,11 +505,14 @@ static int recover_dsync_blocks(struct nilfs_sb_info *sbi,
}
pos = rb->blkoff << inode->i_blkbits;
- page = NULL;
- err = block_write_begin(NULL, inode->i_mapping, pos, blocksize,
- 0, &page, NULL, nilfs_get_block);
- if (unlikely(err))
+ err = block_write_begin(inode->i_mapping, pos, blocksize,
+ 0, &page, nilfs_get_block);
+ if (unlikely(err)) {
+ loff_t isize = inode->i_size;
+ if (pos + blocksize > isize)
+ vmtruncate(inode, isize);
goto failed_inode;
+ }
err = nilfs_recovery_copy_block(sbi, rb, page);
if (unlikely(err))
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 6e7a3291bbe8d..810cff346468a 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -312,9 +312,17 @@ static int omfs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags,
- pagep, fsdata, omfs_get_block);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
+ omfs_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t omfs_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/sysv/itree.c b/fs/sysv/itree.c
index 82a005c3d7ebd..9ca66276315e0 100644
--- a/fs/sysv/itree.c
+++ b/fs/sysv/itree.c
@@ -468,9 +468,16 @@ static int sysv_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- get_block);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep, get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t sysv_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 124852bcf6fe0..ecddcc2ed7463 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -127,9 +127,16 @@ static int udf_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- udf_get_block);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep, udf_get_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t udf_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 45ce32391f8f3..45cafa937a4b2 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -567,9 +567,17 @@ static int ufs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags, pagep,
ufs_getfrag_block);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
static sector_t ufs_bmap(struct address_space *mapping, sector_t block)
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 7968d41e27ada..bf7aad0d78b89 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1504,9 +1504,17 @@ xfs_vm_write_begin(
struct page **pagep,
void **fsdata)
{
- *pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags | AOP_FLAG_NOFS,
- pagep, fsdata, xfs_get_blocks);
+ int ret;
+
+ ret = block_write_begin(mapping, pos, len, flags | AOP_FLAG_NOFS,
+ pagep, xfs_get_blocks);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
}
STATIC sector_t
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index accc9f81bb632..3f69054f86d97 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -203,12 +203,8 @@ int block_write_full_page_endio(struct page *page, get_block_t *get_block,
int block_read_full_page(struct page*, get_block_t*);
int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
unsigned long from);
-int block_write_begin_newtrunc(struct file *, struct address_space *,
- loff_t, unsigned, unsigned,
- struct page **, void **, get_block_t*);
-int block_write_begin(struct file *, struct address_space *,
- loff_t, unsigned, unsigned,
- struct page **, void **, get_block_t*);
+int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
+ unsigned flags, struct page **pagep, get_block_t *get_block);
int __block_write_begin(struct page *page, loff_t pos, unsigned len,
get_block_t *get_block);
int block_write_end(struct file *, struct address_space *,
--
GitLab
From d39aae9ec447dda84d9a2850743a78a535a71c90 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:29:59 +0200
Subject: [PATCH 552/863] add missing setattr methods
For the new truncate sequence every filesystem that wants to truncate on-disk
state needs a seattr method. Convert the remaining filesystems that implement
the truncate inode operation to have its own setattr method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hfsplus/inode.c | 12 ++++++++++++
fs/minix/file.c | 12 ++++++++++++
fs/omfs/file.c | 12 ++++++++++++
fs/sysv/file.c | 12 ++++++++++++
fs/udf/file.c | 12 ++++++++++++
5 files changed, 60 insertions(+)
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 88bf1b5626413..d6ebe53fbdbf6 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -290,9 +290,21 @@ static int hfsplus_file_release(struct inode *inode, struct file *file)
return 0;
}
+static int hfsplus_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+ return inode_setattr(inode, attr);
+}
+
static const struct inode_operations hfsplus_file_inode_operations = {
.lookup = hfsplus_file_lookup,
.truncate = hfsplus_file_truncate,
+ .setattr = hfsplus_setattr,
.setxattr = hfsplus_setxattr,
.getxattr = hfsplus_getxattr,
.listxattr = hfsplus_listxattr,
diff --git a/fs/minix/file.c b/fs/minix/file.c
index d5320ff23faf2..7a45dd1fe2e54 100644
--- a/fs/minix/file.c
+++ b/fs/minix/file.c
@@ -23,7 +23,19 @@ const struct file_operations minix_file_operations = {
.splice_read = generic_file_splice_read,
};
+static int minix_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+ return inode_setattr(inode, attr);
+}
+
const struct inode_operations minix_file_inode_operations = {
.truncate = minix_truncate,
+ .setattr = minix_setattr,
.getattr = minix_getattr,
};
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 810cff346468a..78c9f0c1a2f3d 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -341,7 +341,19 @@ const struct file_operations omfs_file_operations = {
.splice_read = generic_file_splice_read,
};
+static int omfs_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+ return inode_setattr(inode, attr);
+}
+
const struct inode_operations omfs_file_inops = {
+ .setattr = omfs_setattr,
.truncate = omfs_truncate
};
diff --git a/fs/sysv/file.c b/fs/sysv/file.c
index 750cc22349bd6..94f6319292a10 100644
--- a/fs/sysv/file.c
+++ b/fs/sysv/file.c
@@ -30,7 +30,19 @@ const struct file_operations sysv_file_operations = {
.splice_read = generic_file_splice_read,
};
+static int sysv_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+ return inode_setattr(inode, attr);
+}
+
const struct inode_operations sysv_file_inode_operations = {
.truncate = sysv_truncate,
+ .setattr = sysv_setattr,
.getattr = sysv_getattr,
};
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 94e06d6bddbd1..7376032c89ce0 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -228,6 +228,18 @@ const struct file_operations udf_file_operations = {
.llseek = generic_file_llseek,
};
+static int udf_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+ return inode_setattr(inode, attr);
+}
+
const struct inode_operations udf_file_inode_operations = {
+ .setattr = udf_setattr,
.truncate = udf_truncate,
};
--
GitLab
From 6a1a90ad1b0edb556a7550a6ef8a8756f0304dd5 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:30:00 +0200
Subject: [PATCH 553/863] rename generic_setattr
Despite its name it's now a generic implementation of ->setattr, but
rather a helper to copy attributes from a struct iattr to the inode.
Rename it to setattr_copy to reflect this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/attr.c | 14 +++++++-------
fs/ext2/inode.c | 2 +-
fs/fat/file.c | 2 +-
fs/libfs.c | 3 +--
fs/ramfs/file-nommu.c | 2 +-
fs/sysfs/inode.c | 2 +-
include/linux/fs.h | 2 +-
mm/shmem.c | 2 +-
8 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/fs/attr.c b/fs/attr.c
index b4fa3b0aa5969..1f6a895e24e9f 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -105,13 +105,13 @@ int inode_newsize_ok(const struct inode *inode, loff_t offset)
EXPORT_SYMBOL(inode_newsize_ok);
/**
- * generic_setattr - copy simple metadata updates into the generic inode
+ * setattr_copy - copy simple metadata updates into the generic inode
* @inode: the inode to be updated
* @attr: the new attributes
*
- * generic_setattr must be called with i_mutex held.
+ * setattr_copy must be called with i_mutex held.
*
- * generic_setattr updates the inode's metadata with that specified
+ * setattr_copy updates the inode's metadata with that specified
* in attr. Noticably missing is inode size update, which is more complex
* as it requires pagecache updates. See simple_setsize.
*
@@ -119,7 +119,7 @@ EXPORT_SYMBOL(inode_newsize_ok);
* that for "simple" filesystems, the struct inode is the inode storage.
* The caller is free to mark the inode dirty afterwards if needed.
*/
-void generic_setattr(struct inode *inode, const struct iattr *attr)
+void setattr_copy(struct inode *inode, const struct iattr *attr)
{
unsigned int ia_valid = attr->ia_valid;
@@ -144,11 +144,11 @@ void generic_setattr(struct inode *inode, const struct iattr *attr)
inode->i_mode = mode;
}
}
-EXPORT_SYMBOL(generic_setattr);
+EXPORT_SYMBOL(setattr_copy);
/*
* note this function is deprecated, the new truncate sequence should be
- * used instead -- see eg. simple_setsize, generic_setattr.
+ * used instead -- see eg. simple_setsize, setattr_copy.
*/
int inode_setattr(struct inode *inode, const struct iattr *attr)
{
@@ -163,7 +163,7 @@ int inode_setattr(struct inode *inode, const struct iattr *attr)
return error;
}
- generic_setattr(inode, attr);
+ setattr_copy(inode, attr);
mark_inode_dirty(inode);
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 74dfe5f73330e..7dee7b3f3688f 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1544,7 +1544,7 @@ int ext2_setattr(struct dentry *dentry, struct iattr *iattr)
if (error)
return error;
}
- generic_setattr(inode, iattr);
+ setattr_copy(inode, iattr);
if (iattr->ia_valid & ATTR_MODE)
error = ext2_acl_chmod(inode);
mark_inode_dirty(inode);
diff --git a/fs/fat/file.c b/fs/fat/file.c
index 990dfae022e5f..20813d2c7d61d 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -446,7 +446,7 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr)
goto out;
}
- generic_setattr(inode, attr);
+ setattr_copy(inode, attr);
mark_inode_dirty(inode);
out:
return error;
diff --git a/fs/libfs.c b/fs/libfs.c
index dcaf972cbf1b6..861a887977160 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -395,8 +395,7 @@ int simple_setattr(struct dentry *dentry, struct iattr *iattr)
return error;
}
- generic_setattr(inode, iattr);
-
+ setattr_copy(inode, iattr);
return error;
}
EXPORT_SYMBOL(simple_setattr);
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index d532c20fc1796..8d44f0347b27e 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -183,7 +183,7 @@ static int ramfs_nommu_setattr(struct dentry *dentry, struct iattr *ia)
}
}
- generic_setattr(inode, ia);
+ setattr_copy(inode, ia);
out:
ia->ia_valid = old_ia_valid;
return ret;
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 0835a3b70e03b..7e187fbd3d473 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -122,7 +122,7 @@ int sysfs_setattr(struct dentry *dentry, struct iattr *iattr)
goto out;
/* this ignores size changes */
- generic_setattr(inode, iattr);
+ setattr_copy(inode, iattr);
out:
mutex_unlock(&sysfs_mutex);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index b347b2d5666fe..8ebb5f01a4181 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2393,7 +2393,7 @@ extern int buffer_migrate_page(struct address_space *,
extern int inode_change_ok(const struct inode *, struct iattr *);
extern int inode_newsize_ok(const struct inode *, loff_t offset);
extern int __must_check inode_setattr(struct inode *, const struct iattr *);
-extern void generic_setattr(struct inode *inode, const struct iattr *attr);
+extern void setattr_copy(struct inode *inode, const struct iattr *attr);
extern void file_update_time(struct file *file);
diff --git a/mm/shmem.c b/mm/shmem.c
index f65f84062db55..3b58ad65d26cb 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -811,7 +811,7 @@ static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
error = inode_change_ok(inode, attr);
if (!error)
- generic_setattr(inode, attr);
+ setattr_copy(inode, attr);
#ifdef CONFIG_TMPFS_POSIX_ACL
if (!error && (attr->ia_valid & ATTR_MODE))
error = generic_acl_chmod(inode);
--
GitLab
From eef2380c187890816b73b1a4cb89a09203759469 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:30:01 +0200
Subject: [PATCH 554/863] default to simple_setattr
With the new truncate sequence every filesystem that wants to support file
size changes on disk needs to implement its own ->setattr. So instead
of calling inode_setattr which supports size changes call into a simple
method that doesn't support this. simple_setattr is almost what we
want except that it does not mark the inode dirty after changes. Given
that marking the inode dirty is a no-op for the simple in-memory filesystems
that use simple_setattr currently just add the mark_inode_dirty call.
Also add a WARN_ON for the presence of a truncate method to simple_setattr
to catch new instances of it during the transition period.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/attr.c | 9 +++------
fs/libfs.c | 16 +++++++++++-----
2 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/fs/attr.c b/fs/attr.c
index 1f6a895e24e9f..aeac826f4774c 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -237,13 +237,10 @@ int notify_change(struct dentry * dentry, struct iattr * attr)
if (ia_valid & ATTR_SIZE)
down_write(&dentry->d_inode->i_alloc_sem);
- if (inode->i_op && inode->i_op->setattr) {
+ if (inode->i_op->setattr)
error = inode->i_op->setattr(dentry, attr);
- } else {
- error = inode_change_ok(inode, attr);
- if (!error)
- error = inode_setattr(inode, attr);
- }
+ else
+ error = simple_setattr(dentry, attr);
if (ia_valid & ATTR_SIZE)
up_write(&dentry->d_inode->i_alloc_sem);
diff --git a/fs/libfs.c b/fs/libfs.c
index 861a887977160..40562224b7189 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -370,21 +370,26 @@ int simple_setsize(struct inode *inode, loff_t newsize)
EXPORT_SYMBOL(simple_setsize);
/**
- * simple_setattr - setattr for simple in-memory filesystem
+ * simple_setattr - setattr for simple filesystem
* @dentry: dentry
* @iattr: iattr structure
*
* Returns 0 on success, -error on failure.
*
- * simple_setattr implements setattr for an in-memory filesystem which
- * does not store its own file data or metadata (eg. uses the page cache
- * and inode cache as its data store).
+ * simple_setattr is a simple ->setattr implementation without a proper
+ * implementation of size changes.
+ *
+ * It can either be used for in-memory filesystems or special files
+ * on simple regular filesystems. Anything that needs to change on-disk
+ * or wire state on size changes needs its own setattr method.
*/
int simple_setattr(struct dentry *dentry, struct iattr *iattr)
{
struct inode *inode = dentry->d_inode;
int error;
+ WARN_ON_ONCE(inode->i_op->truncate);
+
error = inode_change_ok(inode, iattr);
if (error)
return error;
@@ -396,7 +401,8 @@ int simple_setattr(struct dentry *dentry, struct iattr *iattr)
}
setattr_copy(inode, iattr);
- return error;
+ mark_inode_dirty(inode);
+ return 0;
}
EXPORT_SYMBOL(simple_setattr);
--
GitLab
From 1025774ce411f2bd4b059ad7b53f0003569b74fa Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:30:02 +0200
Subject: [PATCH 555/863] remove inode_setattr
Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.
In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:
spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above
In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
arch/powerpc/platforms/cell/spufs/inode.c | 4 +-
drivers/staging/pohmelfs/inode.c | 14 +++-
fs/9p/vfs_inode.c | 15 +++-
fs/affs/inode.c | 13 ++-
fs/attr.c | 25 ------
fs/btrfs/inode.c | 12 +--
fs/cifs/inode.c | 45 ++++++++---
fs/exofs/inode.c | 14 +++-
fs/ext3/inode.c | 12 ++-
fs/ext4/inode.c | 16 +++-
fs/gfs2/inode.c | 25 ++++--
fs/gfs2/ops_inode.c | 12 ++-
fs/gfs2/xattr.c | 24 ++++--
fs/hfs/inode.c | 12 ++-
fs/hfsplus/inode.c | 12 ++-
fs/hostfs/hostfs_kern.c | 18 ++++-
fs/hpfs/inode.c | 12 ++-
fs/hugetlbfs/inode.c | 17 ++--
fs/jfs/file.c | 14 +++-
fs/logfs/file.c | 18 +++--
fs/minix/file.c | 12 ++-
fs/ncpfs/inode.c | 24 +++---
fs/nilfs2/inode.c | 25 ++++--
fs/ntfs/inode.c | 3 -
fs/ocfs2/dlmfs/dlmfs.c | 8 +-
fs/ocfs2/file.c | 16 +++-
fs/omfs/file.c | 12 ++-
fs/proc/base.c | 16 +++-
fs/proc/generic.c | 18 +++--
fs/proc/proc_sysctl.c | 15 +++-
fs/reiserfs/inode.c | 97 ++++++++++++-----------
fs/sysv/file.c | 12 ++-
fs/udf/file.c | 12 ++-
fs/ufs/truncate.c | 5 +-
include/linux/fs.h | 1 -
35 files changed, 416 insertions(+), 194 deletions(-)
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index e5e5f823d6870..32625f366fb5b 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -110,7 +110,9 @@ spufs_setattr(struct dentry *dentry, struct iattr *attr)
if ((attr->ia_valid & ATTR_SIZE) &&
(attr->ia_size != inode->i_size))
return -EINVAL;
- return inode_setattr(inode, attr);
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 643b413d9f0f3..e818f53ccfd77 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -968,12 +968,18 @@ int pohmelfs_setattr_raw(struct inode *inode, struct iattr *attr)
goto err_out_exit;
}
- err = inode_setattr(inode, attr);
- if (err) {
- dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino);
- goto err_out_exit;
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ err = vmtruncate(inode, attr->ia_size);
+ if (err) {
+ dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino);
+ goto err_out_exit;
+ }
}
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
dprintk("%s: ino: %llu, mode: %o -> %o, uid: %u -> %u, gid: %u -> %u, size: %llu -> %llu.\n",
__func__, POHMELFS_I(inode)->ino, inode->i_mode, attr->ia_mode,
inode->i_uid, attr->ia_uid, inode->i_gid, attr->ia_gid, inode->i_size, attr->ia_size);
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 4331b3b5ee1c9..4b3ad6ac9a41d 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -896,10 +896,19 @@ static int v9fs_vfs_setattr(struct dentry *dentry, struct iattr *iattr)
}
retval = p9_client_wstat(fid, &wstat);
- if (retval >= 0)
- retval = inode_setattr(dentry->d_inode, iattr);
+ if (retval < 0)
+ return retval;
+
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(dentry->d_inode)) {
+ retval = vmtruncate(dentry->d_inode, iattr->ia_size);
+ if (retval)
+ return retval;
+ }
- return retval;
+ setattr_copy(dentry->d_inode, iattr);
+ mark_inode_dirty(dentry->d_inode);
+ return 0;
}
/**
diff --git a/fs/affs/inode.c b/fs/affs/inode.c
index f4b2a4ee4f911..6883d5fb84cfc 100644
--- a/fs/affs/inode.c
+++ b/fs/affs/inode.c
@@ -235,8 +235,17 @@ affs_notify_change(struct dentry *dentry, struct iattr *attr)
goto out;
}
- error = inode_setattr(inode, attr);
- if (!error && (attr->ia_valid & ATTR_MODE))
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
+ if (attr->ia_valid & ATTR_MODE)
mode_to_prot(inode);
out:
return error;
diff --git a/fs/attr.c b/fs/attr.c
index aeac826f4774c..ed44d8ae8bf1a 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -146,31 +146,6 @@ void setattr_copy(struct inode *inode, const struct iattr *attr)
}
EXPORT_SYMBOL(setattr_copy);
-/*
- * note this function is deprecated, the new truncate sequence should be
- * used instead -- see eg. simple_setsize, setattr_copy.
- */
-int inode_setattr(struct inode *inode, const struct iattr *attr)
-{
- unsigned int ia_valid = attr->ia_valid;
-
- if (ia_valid & ATTR_SIZE &&
- attr->ia_size != i_size_read(inode)) {
- int error;
-
- error = vmtruncate(inode, attr->ia_size);
- if (error)
- return error;
- }
-
- setattr_copy(inode, attr);
-
- mark_inode_dirty(inode);
-
- return 0;
-}
-EXPORT_SYMBOL(inode_setattr);
-
int notify_change(struct dentry * dentry, struct iattr * attr)
{
struct inode *inode = dentry->d_inode;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 1bff92ad47443..7f9e0536db1ac 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3656,13 +3656,15 @@ static int btrfs_setattr(struct dentry *dentry, struct iattr *attr)
if (err)
return err;
}
- attr->ia_valid &= ~ATTR_SIZE;
- if (attr->ia_valid)
- err = inode_setattr(inode, attr);
+ if (attr->ia_valid) {
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
+ if (attr->ia_valid & ATTR_MODE)
+ err = btrfs_acl_chmod(inode);
+ }
- if (!err && ((attr->ia_valid & ATTR_MODE)))
- err = btrfs_acl_chmod(inode);
return err;
}
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index a15b3a9bbff40..9c6a40f5cc577 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1889,18 +1889,27 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
- if (!rc) {
- rc = inode_setattr(inode, attrs);
+ if (rc)
+ goto out;
- /* force revalidate when any of these times are set since some
- of the fs types (eg ext3, fat) do not have fine enough
- time granularity to match protocol, and we do not have a
- a way (yet) to query the server fs's time granularity (and
- whether it rounds times down).
- */
- if (!rc && (attrs->ia_valid & (ATTR_MTIME | ATTR_CTIME)))
- cifsInode->time = 0;
+ if ((attrs->ia_valid & ATTR_SIZE) &&
+ attrs->ia_size != i_size_read(inode)) {
+ rc = vmtruncate(inode, attrs->ia_size);
+ if (rc)
+ goto out;
}
+
+ setattr_copy(inode, attrs);
+ mark_inode_dirty(inode);
+
+ /* force revalidate when any of these times are set since some
+ of the fs types (eg ext3, fat) do not have fine enough
+ time granularity to match protocol, and we do not have a
+ a way (yet) to query the server fs's time granularity (and
+ whether it rounds times down).
+ */
+ if (attrs->ia_valid & (ATTR_MTIME | ATTR_CTIME))
+ cifsInode->time = 0;
out:
kfree(args);
kfree(full_path);
@@ -2040,8 +2049,20 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
/* do not need local check to inode_check_ok since the server does
that */
- if (!rc)
- rc = inode_setattr(inode, attrs);
+ if (rc)
+ goto cifs_setattr_exit;
+
+ if ((attrs->ia_valid & ATTR_SIZE) &&
+ attrs->ia_size != i_size_read(inode)) {
+ rc = vmtruncate(inode, attrs->ia_size);
+ if (rc)
+ goto cifs_setattr_exit;
+ }
+
+ setattr_copy(inode, attrs);
+ mark_inode_dirty(inode);
+ return 0;
+
cifs_setattr_exit:
kfree(full_path);
FreeXid(xid);
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 4bb6ef822e46d..4bfc1f4fd013a 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -887,8 +887,18 @@ int exofs_setattr(struct dentry *dentry, struct iattr *iattr)
if (error)
return error;
- error = inode_setattr(inode, iattr);
- return error;
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(inode)) {
+ int error;
+
+ error = vmtruncate(inode, iattr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
+ return 0;
}
static const struct osd_attr g_attr_inode_file_layout = ATTR_DEF(
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 5c6f07eefa4a0..b04d119366838 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -3208,9 +3208,17 @@ int ext3_setattr(struct dentry *dentry, struct iattr *attr)
ext3_journal_stop(handle);
}
- rc = inode_setattr(inode, attr);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ rc = vmtruncate(inode, attr->ia_size);
+ if (rc)
+ goto err_out;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
- if (!rc && (ia_valid & ATTR_MODE))
+ if (ia_valid & ATTR_MODE)
rc = ext3_acl_chmod(inode);
err_out:
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3da3c9646e5e1..1fb390359bc5f 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5539,11 +5539,19 @@ int ext4_setattr(struct dentry *dentry, struct iattr *attr)
ext4_truncate(inode);
}
- rc = inode_setattr(inode, attr);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode))
+ rc = vmtruncate(inode, attr->ia_size);
- /* If inode_setattr's call to ext4_truncate failed to get a
- * transaction handle at all, we need to clean up the in-core
- * orphan list manually. */
+ if (!rc) {
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ }
+
+ /*
+ * If the call to ext4_truncate failed to get a transaction handle at
+ * all, we need to clean up the in-core orphan list manually.
+ */
if (inode->i_nlink)
ext4_orphan_del(NULL, inode);
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index f03afd9c44bc7..6c023a3b5d257 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -991,18 +991,29 @@ struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
static int __gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
{
+ struct inode *inode = &ip->i_inode;
struct buffer_head *dibh;
int error;
error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- error = inode_setattr(&ip->i_inode, attr);
- gfs2_assert_warn(GFS2_SB(&ip->i_inode), !error);
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
}
- return error;
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
+ gfs2_assert_warn(GFS2_SB(inode), !error);
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ return 0;
}
/**
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 98cdd05f3316f..d7d410a4ca421 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -1136,8 +1136,16 @@ static int setattr_chown(struct inode *inode, struct iattr *attr)
if (error)
goto out_end_trans;
- error = inode_setattr(inode, attr);
- gfs2_assert_warn(sdp, !error);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ int error;
+
+ error = vmtruncate(inode, attr->ia_size);
+ gfs2_assert_warn(sdp, !error);
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
diff --git a/fs/gfs2/xattr.c b/fs/gfs2/xattr.c
index 82f93da00d1b4..776af6eb4bcb1 100644
--- a/fs/gfs2/xattr.c
+++ b/fs/gfs2/xattr.c
@@ -1296,6 +1296,7 @@ static int ea_acl_chmod_unstuffed(struct gfs2_inode *ip,
int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
{
+ struct inode *inode = &ip->i_inode;
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_ea_location el;
struct buffer_head *dibh;
@@ -1321,14 +1322,25 @@ int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
return error;
error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- error = inode_setattr(&ip->i_inode, attr);
- gfs2_assert_warn(GFS2_SB(&ip->i_inode), !error);
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
+ if (error)
+ goto out_trans_end;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ int error;
+
+ error = vmtruncate(inode, attr->ia_size);
+ gfs2_assert_warn(GFS2_SB(inode), !error);
}
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+
+out_trans_end:
gfs2_trans_end(sdp);
return error;
}
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 8df18e63eb6b1..87de671baa832 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -612,10 +612,16 @@ int hfs_inode_setattr(struct dentry *dentry, struct iattr * attr)
attr->ia_mode = inode->i_mode & ~S_IWUGO;
attr->ia_mode &= S_ISDIR(inode->i_mode) ? ~hsb->s_dir_umask: ~hsb->s_file_umask;
}
- error = inode_setattr(inode, attr);
- if (error)
- return error;
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
return 0;
}
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index d6ebe53fbdbf6..654c5a8ddf1cf 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -298,7 +298,17 @@ static int hfsplus_setattr(struct dentry *dentry, struct iattr *attr)
error = inode_change_ok(inode, attr);
if (error)
return error;
- return inode_setattr(inode, attr);
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static const struct inode_operations hfsplus_file_inode_operations = {
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 87ac1891a1858..7943ff11d4899 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -849,13 +849,14 @@ int hostfs_permission(struct inode *ino, int desired)
int hostfs_setattr(struct dentry *dentry, struct iattr *attr)
{
+ struct inode *inode = dentry->d_inode;
struct hostfs_iattr attrs;
char *name;
int err;
- int fd = HOSTFS_I(dentry->d_inode)->fd;
+ int fd = HOSTFS_I(inode)->fd;
- err = inode_change_ok(dentry->d_inode, attr);
+ err = inode_change_ok(inode, attr);
if (err)
return err;
@@ -905,7 +906,18 @@ int hostfs_setattr(struct dentry *dentry, struct iattr *attr)
if (err)
return err;
- return inode_setattr(dentry->d_inode, attr);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ int error;
+
+ error = vmtruncate(inode, attr->ia_size);
+ if (err)
+ return err;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static const struct inode_operations hostfs_iops = {
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 1042a9bc97f37..3f3b397fd4e6c 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -277,9 +277,15 @@ int hpfs_setattr(struct dentry *dentry, struct iattr *attr)
if (error)
goto out_unlock;
- error = inode_setattr(inode, attr);
- if (error)
- goto out_unlock;
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
hpfs_write_inode(inode);
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index a4e9a7ec3691a..d5f019d48b09e 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -448,19 +448,20 @@ static int hugetlbfs_setattr(struct dentry *dentry, struct iattr *attr)
error = inode_change_ok(inode, attr);
if (error)
- goto out;
+ return error;
if (ia_valid & ATTR_SIZE) {
error = -EINVAL;
- if (!(attr->ia_size & ~huge_page_mask(h)))
- error = hugetlb_vmtruncate(inode, attr->ia_size);
+ if (attr->ia_size & ~huge_page_mask(h))
+ return -EINVAL;
+ error = hugetlb_vmtruncate(inode, attr->ia_size);
if (error)
- goto out;
- attr->ia_valid &= ~ATTR_SIZE;
+ return error;
}
- error = inode_setattr(inode, attr);
-out:
- return error;
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static struct inode *hugetlbfs_get_inode(struct super_block *sb, uid_t uid,
diff --git a/fs/jfs/file.c b/fs/jfs/file.c
index 127263cc86571..c5ce6c1d1ff40 100644
--- a/fs/jfs/file.c
+++ b/fs/jfs/file.c
@@ -17,6 +17,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/quotaops.h>
#include "jfs_incore.h"
@@ -107,11 +108,18 @@ int jfs_setattr(struct dentry *dentry, struct iattr *iattr)
return rc;
}
- rc = inode_setattr(inode, iattr);
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(inode)) {
+ rc = vmtruncate(inode, iattr->ia_size);
+ if (rc)
+ return rc;
+ }
- if (!rc && (iattr->ia_valid & ATTR_MODE))
- rc = jfs_acl_chmod(inode);
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
+ if (iattr->ia_valid & ATTR_MODE)
+ rc = jfs_acl_chmod(inode);
return rc;
}
diff --git a/fs/logfs/file.c b/fs/logfs/file.c
index abe1cafbd4c26..23b4d03bbd26b 100644
--- a/fs/logfs/file.c
+++ b/fs/logfs/file.c
@@ -232,15 +232,19 @@ static int logfs_setattr(struct dentry *dentry, struct iattr *attr)
struct inode *inode = dentry->d_inode;
int err = 0;
- if (attr->ia_valid & ATTR_SIZE)
+ if (attr->ia_valid & ATTR_SIZE) {
err = logfs_truncate(inode, attr->ia_size);
- attr->ia_valid &= ~ATTR_SIZE;
+ if (err)
+ return err;
+ }
- if (!err)
- err = inode_change_ok(inode, attr);
- if (!err)
- err = inode_setattr(inode, attr);
- return err;
+ err = inode_change_ok(inode, attr);
+ if (err)
+ return err;
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
const struct inode_operations logfs_reg_iops = {
diff --git a/fs/minix/file.c b/fs/minix/file.c
index 7a45dd1fe2e54..4493ce695ab83 100644
--- a/fs/minix/file.c
+++ b/fs/minix/file.c
@@ -31,7 +31,17 @@ static int minix_setattr(struct dentry *dentry, struct iattr *attr)
error = inode_change_ok(inode, attr);
if (error)
return error;
- return inode_setattr(inode, attr);
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
const struct inode_operations minix_file_inode_operations = {
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index fa33851540234..b4e8aaae14be5 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -924,9 +924,8 @@ int ncp_notify_change(struct dentry *dentry, struct iattr *attr)
tmpattr.ia_valid = ATTR_MODE;
tmpattr.ia_mode = attr->ia_mode;
- result = inode_setattr(inode, &tmpattr);
- if (result)
- goto out;
+ setattr_copy(inode, &tmpattr);
+ mark_inode_dirty(inode);
}
}
#endif
@@ -954,15 +953,12 @@ int ncp_notify_change(struct dentry *dentry, struct iattr *attr)
result = ncp_make_closed(inode);
if (result)
goto out;
- {
- struct iattr tmpattr;
-
- tmpattr.ia_valid = ATTR_SIZE;
- tmpattr.ia_size = attr->ia_size;
-
- result = inode_setattr(inode, &tmpattr);
+
+ if (attr->ia_size != i_size_read(inode)) {
+ result = vmtruncate(inode, attr->ia_size);
if (result)
goto out;
+ mark_inode_dirty(inode);
}
}
if ((attr->ia_valid & ATTR_CTIME) != 0) {
@@ -1002,8 +998,12 @@ int ncp_notify_change(struct dentry *dentry, struct iattr *attr)
NCP_FINFO(inode)->nwattr = info.attributes;
#endif
}
- if (!result)
- result = inode_setattr(inode, attr);
+ if (result)
+ goto out;
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
out:
unlock_kernel();
return result;
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 5c694ece172ef..051d279abb379 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -656,14 +656,27 @@ int nilfs_setattr(struct dentry *dentry, struct iattr *iattr)
err = nilfs_transaction_begin(sb, &ti, 0);
if (unlikely(err))
return err;
- err = inode_setattr(inode, iattr);
- if (!err && (iattr->ia_valid & ATTR_MODE))
+
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(inode)) {
+ err = vmtruncate(inode, iattr->ia_size);
+ if (unlikely(err))
+ goto out_err;
+ }
+
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
+
+ if (iattr->ia_valid & ATTR_MODE) {
err = nilfs_acl_chmod(inode);
- if (likely(!err))
- err = nilfs_transaction_commit(sb);
- else
- nilfs_transaction_abort(sb);
+ if (unlikely(err))
+ goto out_err;
+ }
+
+ return nilfs_transaction_commit(sb);
+out_err:
+ nilfs_transaction_abort(sb);
return err;
}
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 4b57fb1eac2ab..fdef8f729c3ad 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -2879,9 +2879,6 @@ void ntfs_truncate_vfs(struct inode *vi) {
*
* Called with ->i_mutex held. For the ATTR_SIZE (i.e. ->truncate) case, also
* called with ->i_alloc_sem held for writing.
- *
- * Basically this is a copy of generic notify_change() and inode_setattr()
- * functionality, except we intercept and abort changes in i_size.
*/
int ntfs_setattr(struct dentry *dentry, struct iattr *attr)
{
diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c
index b83d6107a1f5e..85e4ccaedd1f3 100644
--- a/fs/ocfs2/dlmfs/dlmfs.c
+++ b/fs/ocfs2/dlmfs/dlmfs.c
@@ -214,10 +214,12 @@ static int dlmfs_file_setattr(struct dentry *dentry, struct iattr *attr)
attr->ia_valid &= ~ATTR_SIZE;
error = inode_change_ok(inode, attr);
- if (!error)
- error = inode_setattr(inode, attr);
+ if (error)
+ return error;
- return error;
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static unsigned int dlmfs_file_poll(struct file *file, poll_table *wait)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 2b10b36d15772..584cf8ac167aa 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1238,13 +1238,21 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
* Otherwise, we could get into problems with truncate as
* ip_alloc_sem is used there to protect against i_size
* changes.
+ *
+ * XXX: this means the conditional below can probably be removed.
*/
- status = inode_setattr(inode, attr);
- if (status < 0) {
- mlog_errno(status);
- goto bail_commit;
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ status = vmtruncate(inode, attr->ia_size);
+ if (status) {
+ mlog_errno(status);
+ goto bail_commit;
+ }
}
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+
status = ocfs2_mark_inode_dirty(handle, inode, bh);
if (status < 0)
mlog_errno(status);
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 78c9f0c1a2f3d..5542c284dc1cd 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -349,7 +349,17 @@ static int omfs_setattr(struct dentry *dentry, struct iattr *attr)
error = inode_change_ok(inode, attr);
if (error)
return error;
- return inode_setattr(inode, attr);
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
const struct inode_operations omfs_file_inops = {
diff --git a/fs/proc/base.c b/fs/proc/base.c
index acb7ef80ea4fc..a49d9dd06d1d7 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -561,9 +561,19 @@ static int proc_setattr(struct dentry *dentry, struct iattr *attr)
return -EPERM;
error = inode_change_ok(inode, attr);
- if (!error)
- error = inode_setattr(inode, attr);
- return error;
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static const struct inode_operations proc_def_inode_operations = {
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 2791907744edf..dd29f03376610 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -12,6 +12,7 @@
#include <linux/time.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
+#include <linux/mm.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mount.h>
@@ -258,17 +259,22 @@ static int proc_notify_change(struct dentry *dentry, struct iattr *iattr)
error = inode_change_ok(inode, iattr);
if (error)
- goto out;
+ return error;
- error = inode_setattr(inode, iattr);
- if (error)
- goto out;
+ if ((iattr->ia_valid & ATTR_SIZE) &&
+ iattr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, iattr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, iattr);
+ mark_inode_dirty(inode);
de->uid = inode->i_uid;
de->gid = inode->i_gid;
de->mode = inode->i_mode;
-out:
- return error;
+ return 0;
}
static int proc_getattr(struct vfsmount *mnt, struct dentry *dentry,
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 6ff9981f0a188..5be436ea088ee 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -329,10 +329,19 @@ static int proc_sys_setattr(struct dentry *dentry, struct iattr *attr)
return -EPERM;
error = inode_change_ok(inode, attr);
- if (!error)
- error = inode_setattr(inode, attr);
+ if (error)
+ return error;
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
- return error;
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
static int proc_sys_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 045729f5674ac..2b8dc5c22867b 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -3134,55 +3134,62 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
}
error = inode_change_ok(inode, attr);
- if (!error) {
- if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
- (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
- error = reiserfs_chown_xattrs(inode, attr);
+ if (error)
+ goto out;
- if (!error) {
- struct reiserfs_transaction_handle th;
- int jbegin_count =
- 2 *
- (REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb) +
- REISERFS_QUOTA_DEL_BLOCKS(inode->i_sb)) +
- 2;
-
- /* (user+group)*(old+new) structure - we count quota info and , inode write (sb, inode) */
- error =
- journal_begin(&th, inode->i_sb,
- jbegin_count);
- if (error)
- goto out;
- error = dquot_transfer(inode, attr);
- if (error) {
- journal_end(&th, inode->i_sb,
- jbegin_count);
- goto out;
- }
- /* Update corresponding info in inode so that everything is in
- * one transaction */
- if (attr->ia_valid & ATTR_UID)
- inode->i_uid = attr->ia_uid;
- if (attr->ia_valid & ATTR_GID)
- inode->i_gid = attr->ia_gid;
- mark_inode_dirty(inode);
- error =
- journal_end(&th, inode->i_sb, jbegin_count);
- }
- }
- if (!error) {
- /*
- * Relax the lock here, as it might truncate the
- * inode pages and wait for inode pages locks.
- * To release such page lock, the owner needs the
- * reiserfs lock
- */
- reiserfs_write_unlock_once(inode->i_sb, depth);
- error = inode_setattr(inode, attr);
- depth = reiserfs_write_lock_once(inode->i_sb);
+ if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
+ (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
+ struct reiserfs_transaction_handle th;
+ int jbegin_count =
+ 2 *
+ (REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb) +
+ REISERFS_QUOTA_DEL_BLOCKS(inode->i_sb)) +
+ 2;
+
+ error = reiserfs_chown_xattrs(inode, attr);
+
+ if (error)
+ return error;
+
+ /* (user+group)*(old+new) structure - we count quota info and , inode write (sb, inode) */
+ error = journal_begin(&th, inode->i_sb, jbegin_count);
+ if (error)
+ goto out;
+ error = dquot_transfer(inode, attr);
+ if (error) {
+ journal_end(&th, inode->i_sb, jbegin_count);
+ goto out;
}
+
+ /* Update corresponding info in inode so that everything is in
+ * one transaction */
+ if (attr->ia_valid & ATTR_UID)
+ inode->i_uid = attr->ia_uid;
+ if (attr->ia_valid & ATTR_GID)
+ inode->i_gid = attr->ia_gid;
+ mark_inode_dirty(inode);
+ error = journal_end(&th, inode->i_sb, jbegin_count);
+ if (error)
+ goto out;
}
+ /*
+ * Relax the lock here, as it might truncate the
+ * inode pages and wait for inode pages locks.
+ * To release such page lock, the owner needs the
+ * reiserfs lock
+ */
+ reiserfs_write_unlock_once(inode->i_sb, depth);
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode))
+ error = vmtruncate(inode, attr->ia_size);
+
+ if (!error) {
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ }
+ depth = reiserfs_write_lock_once(inode->i_sb);
+
if (!error && reiserfs_posixacl(inode->i_sb)) {
if (attr->ia_valid & ATTR_MODE)
error = reiserfs_acl_chmod(inode);
diff --git a/fs/sysv/file.c b/fs/sysv/file.c
index 94f6319292a10..0a65939508e96 100644
--- a/fs/sysv/file.c
+++ b/fs/sysv/file.c
@@ -38,7 +38,17 @@ static int sysv_setattr(struct dentry *dentry, struct iattr *attr)
error = inode_change_ok(inode, attr);
if (error)
return error;
- return inode_setattr(inode, attr);
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
const struct inode_operations sysv_file_inode_operations = {
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 7376032c89ce0..04bb5bf076308 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -236,7 +236,17 @@ static int udf_setattr(struct dentry *dentry, struct iattr *attr)
error = inode_change_ok(inode, attr);
if (error)
return error;
- return inode_setattr(inode, attr);
+
+ if ((attr->ia_valid & ATTR_SIZE) &&
+ attr->ia_size != i_size_read(inode)) {
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
const struct inode_operations udf_file_inode_operations = {
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index 589e01a465bad..085e11623b7b9 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -525,7 +525,10 @@ int ufs_setattr(struct dentry *dentry, struct iattr *attr)
if (error)
return error;
}
- return inode_setattr(inode, attr);
+
+ setattr_copy(inode, attr);
+ mark_inode_dirty(inode);
+ return 0;
}
const struct inode_operations ufs_file_inode_operations = {
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 8ebb5f01a4181..6ecb83c00a6db 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2392,7 +2392,6 @@ extern int buffer_migrate_page(struct address_space *,
extern int inode_change_ok(const struct inode *, struct iattr *);
extern int inode_newsize_ok(const struct inode *, loff_t offset);
-extern int __must_check inode_setattr(struct inode *, const struct iattr *);
extern void setattr_copy(struct inode *inode, const struct iattr *attr);
extern void file_update_time(struct file *file);
--
GitLab
From db78b877f7744bec4a9d9f9e7d10da3931d7cd39 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:30:03 +0200
Subject: [PATCH 556/863] always call inode_change_ok early in ->setattr
Make sure we call inode_change_ok before doing any changes in ->setattr,
and make sure to call it even if our fs wants to ignore normal UNIX
permissions, but use the ATTR_FORCE to skip those.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/cifs/inode.c | 29 +++++++++++++----------------
fs/fat/file.c | 30 +++++++++++++++---------------
fs/fuse/dir.c | 11 ++++++-----
fs/logfs/file.c | 8 ++++----
fs/reiserfs/inode.c | 8 ++++----
mm/shmem.c | 10 ++++++----
6 files changed, 48 insertions(+), 48 deletions(-)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 9c6a40f5cc577..b95f4a5af0138 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1796,14 +1796,12 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
xid = GetXid();
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
- /* check if we have permission to change attrs */
- rc = inode_change_ok(inode, attrs);
- if (rc < 0)
- goto out;
- else
- rc = 0;
- }
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM)
+ attrs->ia_valid |= ATTR_FORCE;
+
+ rc = inode_change_ok(inode, attrs);
+ if (rc < 0)
+ goto out;
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
@@ -1934,14 +1932,13 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
cFYI(1, "setattr on file %s attrs->iavalid 0x%x",
direntry->d_name.name, attrs->ia_valid);
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
- /* check if we have permission to change attrs */
- rc = inode_change_ok(inode, attrs);
- if (rc < 0) {
- FreeXid(xid);
- return rc;
- } else
- rc = 0;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM)
+ attrs->ia_valid |= ATTR_FORCE;
+
+ rc = inode_change_ok(inode, attrs);
+ if (rc < 0) {
+ FreeXid(xid);
+ return rc;
}
full_path = build_path_from_dentry(direntry);
diff --git a/fs/fat/file.c b/fs/fat/file.c
index 20813d2c7d61d..b2eedcee7516b 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -387,21 +387,6 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr)
unsigned int ia_valid;
int error;
- /*
- * Expand the file. Since inode_setattr() updates ->i_size
- * before calling the ->truncate(), but FAT needs to fill the
- * hole before it. XXX: this is no longer true with new truncate
- * sequence.
- */
- if (attr->ia_valid & ATTR_SIZE) {
- if (attr->ia_size > inode->i_size) {
- error = fat_cont_expand(inode, attr->ia_size);
- if (error || attr->ia_valid == ATTR_SIZE)
- goto out;
- attr->ia_valid &= ~ATTR_SIZE;
- }
- }
-
/* Check for setting the inode time. */
ia_valid = attr->ia_valid;
if (ia_valid & TIMES_SET_FLAGS) {
@@ -417,6 +402,21 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr)
goto out;
}
+ /*
+ * Expand the file. Since inode_setattr() updates ->i_size
+ * before calling the ->truncate(), but FAT needs to fill the
+ * hole before it. XXX: this is no longer true with new truncate
+ * sequence.
+ */
+ if (attr->ia_valid & ATTR_SIZE) {
+ if (attr->ia_size > inode->i_size) {
+ error = fat_cont_expand(inode, attr->ia_size);
+ if (error || attr->ia_valid == ATTR_SIZE)
+ goto out;
+ attr->ia_valid &= ~ATTR_SIZE;
+ }
+ }
+
if (((attr->ia_valid & ATTR_UID) &&
(attr->ia_uid != sbi->options.fs_uid)) ||
((attr->ia_valid & ATTR_GID) &&
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 3cdc5f78a4063..43a9b3730a980 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1270,11 +1270,12 @@ static int fuse_do_setattr(struct dentry *entry, struct iattr *attr,
if (!fuse_allow_task(fc, current))
return -EACCES;
- if (fc->flags & FUSE_DEFAULT_PERMISSIONS) {
- err = inode_change_ok(inode, attr);
- if (err)
- return err;
- }
+ if (!(fc->flags & FUSE_DEFAULT_PERMISSIONS))
+ attr->ia_valid |= ATTR_FORCE;
+
+ err = inode_change_ok(inode, attr);
+ if (err)
+ return err;
if ((attr->ia_valid & ATTR_OPEN) && fc->atomic_o_trunc)
return 0;
diff --git a/fs/logfs/file.c b/fs/logfs/file.c
index 23b4d03bbd26b..4dd0f7c06e394 100644
--- a/fs/logfs/file.c
+++ b/fs/logfs/file.c
@@ -232,16 +232,16 @@ static int logfs_setattr(struct dentry *dentry, struct iattr *attr)
struct inode *inode = dentry->d_inode;
int err = 0;
+ err = inode_change_ok(inode, attr);
+ if (err)
+ return err;
+
if (attr->ia_valid & ATTR_SIZE) {
err = logfs_truncate(inode, attr->ia_size);
if (err)
return err;
}
- err = inode_change_ok(inode, attr);
- if (err)
- return err;
-
setattr_copy(inode, attr);
mark_inode_dirty(inode);
return 0;
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 2b8dc5c22867b..46ba1cfc2df30 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -3084,6 +3084,10 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
int depth;
int error;
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
/* must be turned off for recursive notify_change calls */
ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
@@ -3133,10 +3137,6 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
goto out;
}
- error = inode_change_ok(inode, attr);
- if (error)
- goto out;
-
if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
(ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
struct reiserfs_transaction_handle th;
diff --git a/mm/shmem.c b/mm/shmem.c
index 3b58ad65d26cb..0a43505eeaec1 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -767,6 +767,10 @@ static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
loff_t newsize = attr->ia_size;
int error;
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)
&& newsize != inode->i_size) {
struct page *page = NULL;
@@ -809,11 +813,9 @@ static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
shmem_truncate_range(inode, newsize, (loff_t)-1);
}
- error = inode_change_ok(inode, attr);
- if (!error)
- setattr_copy(inode, attr);
+ setattr_copy(inode, attr);
#ifdef CONFIG_TMPFS_POSIX_ACL
- if (!error && (attr->ia_valid & ATTR_MODE))
+ if (attr->ia_valid & ATTR_MODE)
error = generic_acl_chmod(inode);
#endif
return error;
--
GitLab
From 2c27c65ed0696f0b5df2dad2cf6462d72164d547 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 4 Jun 2010 11:30:04 +0200
Subject: [PATCH 557/863] check ATTR_SIZE contraints in inode_change_ok
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok. Also clean up and document inode_change_ok
to make this obvious.
As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error. This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere. Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.
Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.
Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/adfs/inode.c | 5 +----
fs/attr.c | 44 +++++++++++++++++++++++++------------
fs/ecryptfs/inode.c | 18 +++++++++++----
fs/ext2/inode.c | 12 ++--------
fs/fat/fat.h | 1 -
fs/fat/file.c | 17 ++-------------
fs/fuse/dir.c | 6 +----
fs/gfs2/aops.c | 4 ++--
fs/gfs2/ops_inode.c | 6 ++---
fs/jffs2/fs.c | 4 ++--
fs/libfs.c | 51 ++-----------------------------------------
fs/ocfs2/file.c | 6 ++---
fs/ramfs/file-nommu.c | 5 ++---
fs/smbfs/inode.c | 4 +---
fs/ubifs/file.c | 23 +++++++------------
fs/ubifs/ubifs.h | 2 +-
fs/ufs/truncate.c | 11 +++-------
include/linux/fs.h | 1 -
include/linux/mm.h | 1 +
mm/shmem.c | 5 ++---
mm/truncate.c | 38 ++++++++++++++++++++++++--------
21 files changed, 108 insertions(+), 156 deletions(-)
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index b3dec193036bd..65794b8fe79eb 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -333,10 +333,7 @@ adfs_notify_change(struct dentry *dentry, struct iattr *attr)
/* XXX: this is missing some actual on-disk truncation.. */
if (ia_valid & ATTR_SIZE)
- error = simple_setsize(inode, attr->ia_size);
-
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
if (ia_valid & ATTR_MTIME) {
inode->i_mtime = attr->ia_mtime;
diff --git a/fs/attr.c b/fs/attr.c
index ed44d8ae8bf1a..7ca41811afa11 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -14,35 +14,53 @@
#include <linux/fcntl.h>
#include <linux/security.h>
-/* Taken over from the old code... */
-
-/* POSIX UID/GID verification for setting inode attributes. */
+/**
+ * inode_change_ok - check if attribute changes to an inode are allowed
+ * @inode: inode to check
+ * @attr: attributes to change
+ *
+ * Check if we are allowed to change the attributes contained in @attr
+ * in the given inode. This includes the normal unix access permission
+ * checks, as well as checks for rlimits and others.
+ *
+ * Should be called as the first thing in ->setattr implementations,
+ * possibly after taking additional locks.
+ */
int inode_change_ok(const struct inode *inode, struct iattr *attr)
{
- int retval = -EPERM;
unsigned int ia_valid = attr->ia_valid;
+ /*
+ * First check size constraints. These can't be overriden using
+ * ATTR_FORCE.
+ */
+ if (ia_valid & ATTR_SIZE) {
+ int error = inode_newsize_ok(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
/* If force is set do it anyway. */
if (ia_valid & ATTR_FORCE)
- goto fine;
+ return 0;
/* Make sure a caller can chown. */
if ((ia_valid & ATTR_UID) &&
(current_fsuid() != inode->i_uid ||
attr->ia_uid != inode->i_uid) && !capable(CAP_CHOWN))
- goto error;
+ return -EPERM;
/* Make sure caller can chgrp. */
if ((ia_valid & ATTR_GID) &&
(current_fsuid() != inode->i_uid ||
(!in_group_p(attr->ia_gid) && attr->ia_gid != inode->i_gid)) &&
!capable(CAP_CHOWN))
- goto error;
+ return -EPERM;
/* Make sure a caller can chmod. */
if (ia_valid & ATTR_MODE) {
if (!is_owner_or_cap(inode))
- goto error;
+ return -EPERM;
/* Also check the setgid bit! */
if (!in_group_p((ia_valid & ATTR_GID) ? attr->ia_gid :
inode->i_gid) && !capable(CAP_FSETID))
@@ -52,12 +70,10 @@ int inode_change_ok(const struct inode *inode, struct iattr *attr)
/* Check for setting the inode time. */
if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)) {
if (!is_owner_or_cap(inode))
- goto error;
+ return -EPERM;
}
-fine:
- retval = 0;
-error:
- return retval;
+
+ return 0;
}
EXPORT_SYMBOL(inode_change_ok);
@@ -113,7 +129,7 @@ EXPORT_SYMBOL(inode_newsize_ok);
*
* setattr_copy updates the inode's metadata with that specified
* in attr. Noticably missing is inode size update, which is more complex
- * as it requires pagecache updates. See simple_setsize.
+ * as it requires pagecache updates.
*
* The inode is not marked as dirty after this operation. The rationale is
* that for "simple" filesystems, the struct inode is the inode storage.
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 31ef5252f0fe2..82900b063b1e5 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -804,10 +804,20 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia,
size_t num_zeros = (PAGE_CACHE_SIZE
- (ia->ia_size & ~PAGE_CACHE_MASK));
+
+ /*
+ * XXX(truncate) this should really happen at the begginning
+ * of ->setattr. But the code is too messy to that as part
+ * of a larger patch. ecryptfs is also totally missing out
+ * on the inode_change_ok check at the beginning of
+ * ->setattr while would include this.
+ */
+ rc = inode_newsize_ok(inode, ia->ia_size);
+ if (rc)
+ goto out;
+
if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = simple_setsize(inode, ia->ia_size);
- if (rc)
- goto out;
+ truncate_setsize(inode, ia->ia_size);
lower_ia->ia_size = ia->ia_size;
lower_ia->ia_valid |= ATTR_SIZE;
goto out;
@@ -830,7 +840,7 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia,
goto out;
}
}
- simple_setsize(inode, ia->ia_size);
+ truncate_setsize(inode, ia->ia_size);
rc = ecryptfs_write_inode_size_to_metadata(inode);
if (rc) {
printk(KERN_ERR "Problem with "
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 7dee7b3f3688f..069620b30d4d8 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1156,15 +1156,10 @@ static void ext2_truncate_blocks(struct inode *inode, loff_t offset)
__ext2_truncate_blocks(inode, offset);
}
-int ext2_setsize(struct inode *inode, loff_t newsize)
+static int ext2_setsize(struct inode *inode, loff_t newsize)
{
- loff_t oldsize;
int error;
- error = inode_newsize_ok(inode, newsize);
- if (error)
- return error;
-
if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
S_ISLNK(inode->i_mode)))
return -EINVAL;
@@ -1184,10 +1179,7 @@ int ext2_setsize(struct inode *inode, loff_t newsize)
if (error)
return error;
- oldsize = inode->i_size;
- i_size_write(inode, newsize);
- truncate_pagecache(inode, oldsize, newsize);
-
+ truncate_setsize(inode, newsize);
__ext2_truncate_blocks(inode, newsize);
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index 27ac257259542..d75a77f85c281 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -306,7 +306,6 @@ extern long fat_generic_ioctl(struct file *filp, unsigned int cmd,
extern const struct file_operations fat_file_operations;
extern const struct inode_operations fat_file_inode_operations;
extern int fat_setattr(struct dentry * dentry, struct iattr * attr);
-extern int fat_setsize(struct inode *inode, loff_t offset);
extern void fat_truncate_blocks(struct inode *inode, loff_t offset);
extern int fat_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
diff --git a/fs/fat/file.c b/fs/fat/file.c
index b2eedcee7516b..7257752b6d5d3 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -364,18 +364,6 @@ static int fat_allow_set_time(struct msdos_sb_info *sbi, struct inode *inode)
return 0;
}
-int fat_setsize(struct inode *inode, loff_t offset)
-{
- int error;
-
- error = simple_setsize(inode, offset);
- if (error)
- return error;
- fat_truncate_blocks(inode, offset);
-
- return error;
-}
-
#define TIMES_SET_FLAGS (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)
/* valid file mode bits */
#define FAT_VALID_MODE (S_IFREG | S_IFDIR | S_IRWXUGO)
@@ -441,9 +429,8 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr)
}
if (attr->ia_valid & ATTR_SIZE) {
- error = fat_setsize(inode, attr->ia_size);
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
+ fat_truncate_blocks(inode, attr->ia_size);
}
setattr_copy(inode, attr);
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 43a9b3730a980..3978a42d4f047 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1280,12 +1280,8 @@ static int fuse_do_setattr(struct dentry *entry, struct iattr *attr,
if ((attr->ia_valid & ATTR_OPEN) && fc->atomic_o_trunc)
return 0;
- if (attr->ia_valid & ATTR_SIZE) {
- err = inode_newsize_ok(inode, attr->ia_size);
- if (err)
- return err;
+ if (attr->ia_valid & ATTR_SIZE)
is_truncate = true;
- }
req = fuse_get_req(fc);
if (IS_ERR(req))
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 703000d6e4d2d..54fe087bf54c8 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -702,12 +702,12 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
page_cache_release(page);
/*
- * XXX(hch): the call below should probably be replaced with
+ * XXX(truncate): the call below should probably be replaced with
* a call to the gfs2-specific truncate blocks helper to actually
* release disk blocks..
*/
if (pos + len > ip->i_inode.i_size)
- simple_setsize(&ip->i_inode, ip->i_inode.i_size);
+ truncate_setsize(&ip->i_inode, ip->i_inode.i_size);
out_endtrans:
gfs2_trans_end(sdp);
out_trans_fail:
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index d7d410a4ca421..1009be2c97376 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -1072,7 +1072,7 @@ int gfs2_permission(struct inode *inode, int mask)
}
/*
- * XXX: should be changed to have proper ordering by opencoding simple_setsize
+ * XXX(truncate): the truncate_setsize calls should be moved to the end.
*/
static int setattr_size(struct inode *inode, struct iattr *attr)
{
@@ -1084,10 +1084,8 @@ static int setattr_size(struct inode *inode, struct iattr *attr)
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
return error;
- error = simple_setsize(inode, attr->ia_size);
+ truncate_setsize(inode, attr->ia_size);
gfs2_trans_end(sdp);
- if (error)
- return error;
}
error = gfs2_truncatei(ip, attr->ia_size);
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 459d39d1ea0be..1b2426604fe3c 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -169,13 +169,13 @@ int jffs2_do_setattr (struct inode *inode, struct iattr *iattr)
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- /* We have to do the simple_setsize() without f->sem held, since
+ /* We have to do the truncate_setsize() without f->sem held, since
some pages may be locked and waiting for it in readpage().
We are protected from a simultaneous write() extending i_size
back past iattr->ia_size, because do_truncate() holds the
generic inode semaphore. */
if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size) {
- simple_setsize(inode, iattr->ia_size);
+ truncate_setsize(inode, iattr->ia_size);
inode->i_blocks = (inode->i_size + 511) >> 9;
}
diff --git a/fs/libfs.c b/fs/libfs.c
index 40562224b7189..0a9da95317f76 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -326,49 +326,6 @@ int simple_rename(struct inode *old_dir, struct dentry *old_dentry,
return 0;
}
-/**
- * simple_setsize - handle core mm and vfs requirements for file size change
- * @inode: inode
- * @newsize: new file size
- *
- * Returns 0 on success, -error on failure.
- *
- * simple_setsize must be called with inode_mutex held.
- *
- * simple_setsize will check that the requested new size is OK (see
- * inode_newsize_ok), and then will perform the necessary i_size update
- * and pagecache truncation (if necessary). It will be typically be called
- * from the filesystem's setattr function when ATTR_SIZE is passed in.
- *
- * The inode itself must have correct permissions and attributes to allow
- * i_size to be changed, this function then just checks that the new size
- * requested is valid.
- *
- * In the case of simple in-memory filesystems with inodes stored solely
- * in the inode cache, and file data in the pagecache, nothing more needs
- * to be done to satisfy a truncate request. Filesystems with on-disk
- * blocks for example will need to free them in the case of truncate, in
- * that case it may be easier not to use simple_setsize (but each of its
- * components will likely be required at some point to update pagecache
- * and inode etc).
- */
-int simple_setsize(struct inode *inode, loff_t newsize)
-{
- loff_t oldsize;
- int error;
-
- error = inode_newsize_ok(inode, newsize);
- if (error)
- return error;
-
- oldsize = inode->i_size;
- i_size_write(inode, newsize);
- truncate_pagecache(inode, oldsize, newsize);
-
- return error;
-}
-EXPORT_SYMBOL(simple_setsize);
-
/**
* simple_setattr - setattr for simple filesystem
* @dentry: dentry
@@ -394,12 +351,8 @@ int simple_setattr(struct dentry *dentry, struct iattr *iattr)
if (error)
return error;
- if (iattr->ia_valid & ATTR_SIZE) {
- error = simple_setsize(inode, iattr->ia_size);
- if (error)
- return error;
- }
-
+ if (iattr->ia_valid & ATTR_SIZE)
+ truncate_setsize(inode, iattr->ia_size);
setattr_copy(inode, iattr);
mark_inode_dirty(inode);
return 0;
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 584cf8ac167aa..81296b4e36463 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1233,7 +1233,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
}
/*
- * This will intentionally not wind up calling simple_setsize(),
+ * This will intentionally not wind up calling truncate_setsize(),
* since all the work for a size change has been done above.
* Otherwise, we could get into problems with truncate as
* ip_alloc_sem is used there to protect against i_size
@@ -2308,12 +2308,12 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
* blocks outside i_size. Trim these off again.
* Don't need i_size_read because we hold i_mutex.
*
- * XXX(hch): this looks buggy because ocfs2 did not
+ * XXX(truncate): this looks buggy because ocfs2 did not
* actually implement ->truncate. Take a look at
* the new truncate sequence and update this accordingly
*/
if (*ppos + count > inode->i_size)
- simple_setsize(inode, inode->i_size);
+ truncate_setsize(inode, inode->i_size);
ret = written;
goto out_dio;
}
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 8d44f0347b27e..9eead2c796b7f 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -146,9 +146,8 @@ static int ramfs_nommu_resize(struct inode *inode, loff_t newsize, loff_t size)
return ret;
}
- ret = simple_setsize(inode, newsize);
-
- return ret;
+ truncate_setsize(inode, newsize);
+ return 0;
}
/*****************************************************************************/
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index 9551cb6f7fe4d..e338f0a5a70d7 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -714,9 +714,7 @@ smb_notify_change(struct dentry *dentry, struct iattr *attr)
error = server->ops->truncate(inode, attr->ia_size);
if (error)
goto out;
- error = simple_setsize(inode, attr->ia_size);
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
refresh = 1;
}
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 12f445cee9f7b..03ae894c45dea 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -967,14 +967,15 @@ static int do_writepage(struct page *page, int len)
* the page locked, and it locks @ui_mutex. However, write-back does take inode
* @i_mutex, which means other VFS operations may be run on this inode at the
* same time. And the problematic one is truncation to smaller size, from where
- * we have to call 'simple_setsize()', which first changes @inode->i_size, then
+ * we have to call 'truncate_setsize()', which first changes @inode->i_size, then
* drops the truncated pages. And while dropping the pages, it takes the page
- * lock. This means that 'do_truncation()' cannot call 'simple_setsize()' with
+ * lock. This means that 'do_truncation()' cannot call 'truncate_setsize()' with
* @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This
* means that @inode->i_size is changed while @ui_mutex is unlocked.
*
- * XXX: with the new truncate the above is not true anymore, the simple_setsize
- * calls can be replaced with the individual components.
+ * XXX(truncate): with the new truncate sequence this is not true anymore,
+ * and the calls to truncate_setsize can be move around freely. They should
+ * be moved to the very end of the truncate sequence.
*
* But in 'ubifs_writepage()' we have to guarantee that we do not write beyond
* inode size. How do we do this if @inode->i_size may became smaller while we
@@ -1128,9 +1129,7 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
budgeted = 0;
}
- err = simple_setsize(inode, new_size);
- if (err)
- goto out_budg;
+ truncate_setsize(inode, new_size);
if (offset) {
pgoff_t index = new_size >> PAGE_CACHE_SHIFT;
@@ -1217,16 +1216,14 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode,
if (attr->ia_valid & ATTR_SIZE) {
dbg_gen("size %lld -> %lld", inode->i_size, new_size);
- err = simple_setsize(inode, new_size);
- if (err)
- goto out;
+ truncate_setsize(inode, new_size);
}
mutex_lock(&ui->ui_mutex);
if (attr->ia_valid & ATTR_SIZE) {
/* Truncation changes inode [mc]time */
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
- /* 'simple_setsize()' changed @i_size, update @ui_size */
+ /* 'truncate_setsize()' changed @i_size, update @ui_size */
ui->ui_size = inode->i_size;
}
@@ -1248,10 +1245,6 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode,
if (IS_SYNC(inode))
err = inode->i_sb->s_op->write_inode(inode, NULL);
return err;
-
-out:
- ubifs_release_budget(c, &req);
- return err;
}
int ubifs_setattr(struct dentry *dentry, struct iattr *attr)
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 04310878f449a..0c9876b396dd0 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -379,7 +379,7 @@ struct ubifs_gced_idx_leb {
* The @ui_size is a "shadow" variable for @inode->i_size and UBIFS uses
* @ui_size instead of @inode->i_size. The reason for this is that UBIFS cannot
* make sure @inode->i_size is always changed under @ui_mutex, because it
- * cannot call 'simple_setsize()' with @ui_mutex locked, because it would deadlock
+ * cannot call 'truncate_setsize()' with @ui_mutex locked, because it would deadlock
* with 'ubifs_writepage()' (see file.c). All the other inode fields are
* changed under @ui_mutex, so they do not need "shadow" fields. Note, one
* could consider to rework locking and base it on "shadow" fields.
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index 085e11623b7b9..34d5cb1353204 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -500,11 +500,6 @@ int ufs_truncate(struct inode *inode, loff_t old_i_size)
return err;
}
-/*
- * TODO:
- * - truncate case should use proper ordering instead of using
- * simple_setsize
- */
int ufs_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
@@ -518,9 +513,9 @@ int ufs_setattr(struct dentry *dentry, struct iattr *attr)
if (ia_valid & ATTR_SIZE && attr->ia_size != inode->i_size) {
loff_t old_i_size = inode->i_size;
- error = simple_setsize(inode, attr->ia_size);
- if (error)
- return error;
+ /* XXX(truncate): truncate_setsize should be called last */
+ truncate_setsize(inode, attr->ia_size);
+
error = ufs_truncate(inode, old_i_size);
if (error)
return error;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 6ecb83c00a6db..5547b1b027db5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2355,7 +2355,6 @@ extern int simple_link(struct dentry *, struct inode *, struct dentry *);
extern int simple_unlink(struct inode *, struct dentry *);
extern int simple_rmdir(struct inode *, struct dentry *);
extern int simple_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
-extern int simple_setsize(struct inode *, loff_t);
extern int noop_fsync(struct file *, int);
extern int simple_empty(struct dentry *);
extern int simple_readpage(struct file *file, struct page *page);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index a2b48041b9108..980164ea10ee0 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -815,6 +815,7 @@ static inline void unmap_shared_mapping_range(struct address_space *mapping,
}
extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new);
+extern void truncate_setsize(struct inode *inode, loff_t newsize);
extern int vmtruncate(struct inode *inode, loff_t offset);
extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end);
diff --git a/mm/shmem.c b/mm/shmem.c
index 0a43505eeaec1..33222ba256fbd 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -805,11 +805,10 @@ static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
}
}
- error = simple_setsize(inode, newsize);
+ /* XXX(truncate): truncate_setsize should be called last */
+ truncate_setsize(inode, newsize);
if (page)
page_cache_release(page);
- if (error)
- return error;
shmem_truncate_range(inode, newsize, (loff_t)-1);
}
diff --git a/mm/truncate.c b/mm/truncate.c
index 937571b8b2337..ba887bff48c5a 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -540,29 +540,49 @@ void truncate_pagecache(struct inode *inode, loff_t old, loff_t new)
}
EXPORT_SYMBOL(truncate_pagecache);
+/**
+ * truncate_setsize - update inode and pagecache for a new file size
+ * @inode: inode
+ * @newsize: new file size
+ *
+ * truncate_setsize updastes i_size update and performs pagecache
+ * truncation (if necessary) for a file size updates. It will be
+ * typically be called from the filesystem's setattr function when
+ * ATTR_SIZE is passed in.
+ *
+ * Must be called with inode_mutex held and after all filesystem
+ * specific block truncation has been performed.
+ */
+void truncate_setsize(struct inode *inode, loff_t newsize)
+{
+ loff_t oldsize;
+
+ oldsize = inode->i_size;
+ i_size_write(inode, newsize);
+
+ truncate_pagecache(inode, oldsize, newsize);
+}
+EXPORT_SYMBOL(truncate_setsize);
+
/**
* vmtruncate - unmap mappings "freed" by truncate() syscall
* @inode: inode of the file used
* @offset: file offset to start truncating
*
- * NOTE! We have to be ready to update the memory sharing
- * between the file and the memory map for a potential last
- * incomplete page. Ugly, but necessary.
- *
- * This function is deprecated and simple_setsize or truncate_pagecache
- * should be used instead.
+ * This function is deprecated and truncate_setsize or truncate_pagecache
+ * should be used instead, together with filesystem specific block truncation.
*/
int vmtruncate(struct inode *inode, loff_t offset)
{
int error;
- error = simple_setsize(inode, offset);
+ error = inode_newsize_ok(inode, offset);
if (error)
return error;
+ truncate_setsize(inode, offset);
if (inode->i_op->truncate)
inode->i_op->truncate(inode);
-
- return error;
+ return 0;
}
EXPORT_SYMBOL(vmtruncate);
--
GitLab
From 1e2317350971c8b01e6adddc798a00e9bcc1a440 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 7 Jun 2010 09:29:20 +0200
Subject: [PATCH 558/863] update documentation for the new truncate sequence
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
Documentation/filesystems/porting | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index a7e9746ee7ea4..f9547a5c187bd 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -273,3 +273,21 @@ it's safe to remove it. If you don't need it, remove it.
deliberate; as soon as struct block_device * is propagated in a reasonable
way by that code fixing will become trivial; until then nothing can be
done.
+
+[mandatory]
+
+ block truncatation on error exit from ->write_begin, and ->direct_IO
+moved from generic methods (block_write_begin, cont_write_begin,
+nobh_write_begin, blockdev_direct_IO*) to callers. Take a look at
+ext2_write_failed and callers for an example.
+
+[mandatory]
+
+ ->truncate is going away. The whole truncate sequence needs to be
+implemented in ->setattr, which is now mandatory for filesystems
+implementing on-disk size changes. Start with a copy of the old inode_setattr
+and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to
+be in order of zeroing blocks using block_truncate_page or similar helpers,
+size update and on finally on-disk truncation which should not fail.
+inode_change_ok now includes the size checks for ATTR_SIZE and must be called
+in the beginning of ->setattr unconditionally.
--
GitLab
From 41cce647f8dbe26941bed2158fad0839aab7a294 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 8 Jun 2010 13:24:56 -0400
Subject: [PATCH 559/863] jffs2: don't open-code iget_failed()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/jffs2/dir.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 166062a682304..5fd3b5cecda5f 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -232,9 +232,7 @@ static int jffs2_create(struct inode *dir_i, struct dentry *dentry, int mode,
return 0;
fail:
- make_bad_inode(inode);
- unlock_new_inode(inode);
- iput(inode);
+ iget_failed(inode);
jffs2_free_raw_inode(ri);
return ret;
}
@@ -454,9 +452,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
return 0;
fail:
- make_bad_inode(inode);
- unlock_new_inode(inode);
- iput(inode);
+ iget_failed(inode);
return ret;
}
@@ -601,9 +597,7 @@ static int jffs2_mkdir (struct inode *dir_i, struct dentry *dentry, int mode)
return 0;
fail:
- make_bad_inode(inode);
- unlock_new_inode(inode);
- iput(inode);
+ iget_failed(inode);
return ret;
}
@@ -778,9 +772,7 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
return 0;
fail:
- make_bad_inode(inode);
- unlock_new_inode(inode);
- iput(inode);
+ iget_failed(inode);
return ret;
}
--
GitLab
From 2f246fd0f126f3b3c23a4e6b7109350e83356bd6 Mon Sep 17 00:00:00 2001
From: Boaz Harrosh <bharrosh@panasas.com>
Date: Wed, 9 Jun 2010 18:23:18 +0300
Subject: [PATCH 560/863] exofs: New truncate sequence
These changes are crafted based on the similar
conversion done to ext2 by Nick Piggin.
* Remove the deprecated ->truncate vector. Let exofs_setattr
take care of on-disk size updates.
* Call truncate_pagecache on the unused pages if
write_begin/end fails.
* Cleanup exofs_delete_inode that did stupid inode
writes and updates on an inode that will be
removed.
* And finally get rid of exofs_get_block. We never
had any blocks it was all for calling nobh_truncate_page.
nobh_truncate_page is not actually needed in exofs since
the last page is complete and gone, just like all the other
pages. There is no partial blocks in exofs.
I've tested with this patch, and there are no apparent
failures, so far.
CC: Nick Piggin <npiggin@suse.de>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/exofs/exofs.h | 1 -
fs/exofs/file.c | 1 -
fs/exofs/inode.c | 115 +++++++++++++++++------------------------------
3 files changed, 42 insertions(+), 75 deletions(-)
diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h
index 22721b2fd8901..0706ce996c848 100644
--- a/fs/exofs/exofs.h
+++ b/fs/exofs/exofs.h
@@ -256,7 +256,6 @@ static inline int exofs_oi_read(struct exofs_i_info *oi,
}
/* inode.c */
-void exofs_truncate(struct inode *inode);
int exofs_setattr(struct dentry *, struct iattr *);
int exofs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
diff --git a/fs/exofs/file.c b/fs/exofs/file.c
index fef6899be397b..f9bfe2b501d5e 100644
--- a/fs/exofs/file.c
+++ b/fs/exofs/file.c
@@ -86,6 +86,5 @@ const struct file_operations exofs_file_operations = {
};
const struct inode_operations exofs_file_inode_operations = {
- .truncate = exofs_truncate,
.setattr = exofs_setattr,
};
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 4bfc1f4fd013a..ccd0ce3eea755 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -697,6 +697,13 @@ static int exofs_writepage(struct page *page, struct writeback_control *wbc)
return write_exec(&pcol);
}
+/* i_mutex held using inode->i_size directly */
+static void _write_failed(struct inode *inode, loff_t to)
+{
+ if (to > inode->i_size)
+ truncate_pagecache(inode, to, inode->i_size);
+}
+
int exofs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
@@ -710,7 +717,7 @@ int exofs_write_begin(struct file *file, struct address_space *mapping,
fsdata);
if (ret) {
EXOFS_DBGMSG("simple_write_begin faild\n");
- return ret;
+ goto out;
}
page = *pagep;
@@ -725,6 +732,9 @@ int exofs_write_begin(struct file *file, struct address_space *mapping,
EXOFS_DBGMSG("__readpage_filler faild\n");
}
}
+out:
+ if (unlikely(ret))
+ _write_failed(mapping->host, pos + len);
return ret;
}
@@ -750,6 +760,10 @@ static int exofs_write_end(struct file *file, struct address_space *mapping,
int ret;
ret = simple_write_end(file, mapping,pos, len, copied, page, fsdata);
+ if (unlikely(ret))
+ _write_failed(inode, pos + len);
+
+ /* TODO: once simple_write_end marks inode dirty remove */
if (i_size != inode->i_size)
mark_inode_dirty(inode);
return ret;
@@ -808,91 +822,49 @@ static inline int exofs_inode_is_fast_symlink(struct inode *inode)
return S_ISLNK(inode->i_mode) && (oi->i_data[0] != 0);
}
-/*
- * get_block_t - Fill in a buffer_head
- * An OSD takes care of block allocation so we just fake an allocation by
- * putting in the inode's sector_t in the buffer_head.
- * TODO: What about the case of create==0 and @iblock does not exist in the
- * object?
- */
-static int exofs_get_block(struct inode *inode, sector_t iblock,
- struct buffer_head *bh_result, int create)
-{
- map_bh(bh_result, inode->i_sb, iblock);
- return 0;
-}
-
const struct osd_attr g_attr_logical_length = ATTR_DEF(
OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8);
-static int _do_truncate(struct inode *inode)
+static int _do_truncate(struct inode *inode, loff_t newsize)
{
struct exofs_i_info *oi = exofs_i(inode);
- loff_t isize = i_size_read(inode);
int ret;
inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- nobh_truncate_page(inode->i_mapping, isize, exofs_get_block);
+ ret = exofs_oi_truncate(oi, (u64)newsize);
+ if (likely(!ret))
+ truncate_setsize(inode, newsize);
- ret = exofs_oi_truncate(oi, (u64)isize);
- EXOFS_DBGMSG("(0x%lx) size=0x%llx\n", inode->i_ino, isize);
+ EXOFS_DBGMSG("(0x%lx) size=0x%llx ret=>%d\n",
+ inode->i_ino, newsize, ret);
return ret;
}
/*
- * Truncate a file to the specified size - all we have to do is set the size
- * attribute. We make sure the object exists first.
- */
-void exofs_truncate(struct inode *inode)
-{
- struct exofs_i_info *oi = exofs_i(inode);
- int ret;
-
- if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode)
- || S_ISLNK(inode->i_mode)))
- return;
- if (exofs_inode_is_fast_symlink(inode))
- return;
- if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
- return;
-
- /* if we are about to truncate an object, and it hasn't been
- * created yet, wait
- */
- if (unlikely(wait_obj_created(oi)))
- goto fail;
-
- ret = _do_truncate(inode);
- if (ret)
- goto fail;
-
-out:
- mark_inode_dirty(inode);
- return;
-fail:
- make_bad_inode(inode);
- goto out;
-}
-
-/*
- * Set inode attributes - just call generic functions.
+ * Set inode attributes - update size attribute on OSD if needed,
+ * otherwise just call generic functions.
*/
int exofs_setattr(struct dentry *dentry, struct iattr *iattr)
{
struct inode *inode = dentry->d_inode;
int error;
+ /* if we are about to modify an object, and it hasn't been
+ * created yet, wait
+ */
+ error = wait_obj_created(exofs_i(inode));
+ if (unlikely(error))
+ return error;
+
error = inode_change_ok(inode, iattr);
- if (error)
+ if (unlikely(error))
return error;
if ((iattr->ia_valid & ATTR_SIZE) &&
iattr->ia_size != i_size_read(inode)) {
- int error;
-
- error = vmtruncate(inode, iattr->ia_size);
- if (error)
+ error = _do_truncate(inode, iattr->ia_size);
+ if (unlikely(error))
return error;
}
@@ -1345,28 +1317,25 @@ void exofs_delete_inode(struct inode *inode)
truncate_inode_pages(&inode->i_data, 0);
+ /* TODO: should do better here */
if (is_bad_inode(inode))
goto no_delete;
- mark_inode_dirty(inode);
- exofs_update_inode(inode, inode_needs_sync(inode));
-
inode->i_size = 0;
- if (inode->i_blocks)
- exofs_truncate(inode);
-
clear_inode(inode);
- ret = exofs_get_io_state(&sbi->layout, &ios);
- if (unlikely(ret)) {
- EXOFS_ERR("%s: exofs_get_io_state failed\n", __func__);
- return;
- }
-
/* if we are deleting an obj that hasn't been created yet, wait */
if (!obj_created(oi)) {
BUG_ON(!obj_2bcreated(oi));
wait_event(oi->i_wq, obj_created(oi));
+ /* ignore the error attempt a remove anyway */
+ }
+
+ /* Now Remove the OSD objects */
+ ret = exofs_get_io_state(&sbi->layout, &ios);
+ if (unlikely(ret)) {
+ EXOFS_ERR("%s: exofs_get_io_state failed\n", __func__);
+ return;
}
ios->obj.id = exofs_oi_objno(oi);
--
GitLab
From fa9b227e9019ebaeeb06224ba531a490f91144b3 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Mon, 14 Jun 2010 05:17:31 -0400
Subject: [PATCH 561/863] xfs: new truncate sequence
Convert XFS to the new truncate sequence. We still can have errors after
updating the file size in xfs_setattr, but these are real I/O errors and lead
to a transaction abort and filesystem shutdown, so they are not an issue.
Errors from ->write_begin and write_end can now be handled correctly because
we can actually get rid of the delalloc extents while previous the buffer
state was stipped in block_invalidatepage.
There is still no error handling for ->direct_IO, because doing so will need
some major restructuring given that we only have the iolock shared and do not
hold i_mutex at all. Fortunately leaving the normally allocated blocks behind
there is not a major issue and this will get cleaned up by xfs_free_eofblock
later.
Note: the patch is against Al's vfs.git tree as that contains the nessecary
preparations. I'd prefer to get it applied there so that we can get some
testing in linux-next.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/xfs/linux-2.6/xfs_aops.c | 42 ++++++++++++++++++++++++++++++------
fs/xfs/linux-2.6/xfs_iops.c | 16 --------------
fs/xfs/linux-2.6/xfs_linux.h | 2 --
fs/xfs/xfs_vnodeops.c | 38 ++++++++++++++++----------------
4 files changed, 56 insertions(+), 42 deletions(-)
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index bf7aad0d78b89..15412fe15c3a4 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1494,6 +1494,22 @@ xfs_vm_direct_IO(
return ret;
}
+STATIC void
+xfs_vm_write_failed(
+ struct address_space *mapping,
+ loff_t to)
+{
+ struct inode *inode = mapping->host;
+
+ if (to > inode->i_size) {
+ struct iattr ia = {
+ .ia_valid = ATTR_SIZE | ATTR_FORCE,
+ .ia_size = inode->i_size,
+ };
+ xfs_setattr(XFS_I(inode), &ia, XFS_ATTR_NOLOCK);
+ }
+}
+
STATIC int
xfs_vm_write_begin(
struct file *file,
@@ -1508,12 +1524,26 @@ xfs_vm_write_begin(
ret = block_write_begin(mapping, pos, len, flags | AOP_FLAG_NOFS,
pagep, xfs_get_blocks);
- if (unlikely(ret)) {
- loff_t isize = mapping->host->i_size;
- if (pos + len > isize)
- vmtruncate(mapping->host, isize);
- }
+ if (unlikely(ret))
+ xfs_vm_write_failed(mapping, pos + len);
+ return ret;
+}
+
+STATIC int
+xfs_vm_write_end(
+ struct file *file,
+ struct address_space *mapping,
+ loff_t pos,
+ unsigned len,
+ unsigned copied,
+ struct page *page,
+ void *fsdata)
+{
+ int ret;
+ ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
+ if (unlikely(ret < len))
+ xfs_vm_write_failed(mapping, pos + len);
return ret;
}
@@ -1559,7 +1589,7 @@ const struct address_space_operations xfs_address_space_operations = {
.releasepage = xfs_vm_releasepage,
.invalidatepage = xfs_vm_invalidatepage,
.write_begin = xfs_vm_write_begin,
- .write_end = generic_write_end,
+ .write_end = xfs_vm_write_end,
.bmap = xfs_vm_bmap,
.direct_IO = xfs_vm_direct_IO,
.migratepage = buffer_migrate_page,
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 536b81e63a3d8..62dd349faceeb 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -540,21 +540,6 @@ xfs_vn_setattr(
return -xfs_setattr(XFS_I(dentry->d_inode), iattr, 0);
}
-/*
- * block_truncate_page can return an error, but we can't propagate it
- * at all here. Leave a complaint + stack trace in the syslog because
- * this could be bad. If it is bad, we need to propagate the error further.
- */
-STATIC void
-xfs_vn_truncate(
- struct inode *inode)
-{
- int error;
- error = block_truncate_page(inode->i_mapping, inode->i_size,
- xfs_get_blocks);
- WARN_ON(error);
-}
-
STATIC long
xfs_vn_fallocate(
struct inode *inode,
@@ -694,7 +679,6 @@ xfs_vn_fiemap(
static const struct inode_operations xfs_inode_operations = {
.check_acl = xfs_check_acl,
- .truncate = xfs_vn_truncate,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.setxattr = generic_setxattr,
diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h
index 998a9d7fb9c89..2fa0bd9ebc7f1 100644
--- a/fs/xfs/linux-2.6/xfs_linux.h
+++ b/fs/xfs/linux-2.6/xfs_linux.h
@@ -156,8 +156,6 @@
*/
#define xfs_sort(a,n,s,fn) sort(a,n,s,fn,NULL)
#define xfs_stack_trace() dump_stack()
-#define xfs_itruncate_data(ip, off) \
- (-vmtruncate(VFS_I(ip), (off)))
/* Move the kernel do_div definition off to one side */
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 3ac137dd531bb..66d585c6917cf 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -221,8 +221,11 @@ xfs_setattr(
* transaction to modify the i_size.
*/
code = xfs_zero_eof(ip, iattr->ia_size, ip->i_size);
+ if (code)
+ goto error_return;
}
xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ lock_flags &= ~XFS_ILOCK_EXCL;
/*
* We are going to log the inode size change in this
@@ -236,36 +239,35 @@ xfs_setattr(
* really care about here and prevents waiting for other data
* not within the range we care about here.
*/
- if (!code &&
- ip->i_size != ip->i_d.di_size &&
+ if (ip->i_size != ip->i_d.di_size &&
iattr->ia_size > ip->i_d.di_size) {
code = xfs_flush_pages(ip,
ip->i_d.di_size, iattr->ia_size,
XBF_ASYNC, FI_NONE);
+ if (code)
+ goto error_return;
}
/* wait for all I/O to complete */
xfs_ioend_wait(ip);
- if (!code)
- code = xfs_itruncate_data(ip, iattr->ia_size);
- if (code) {
- ASSERT(tp == NULL);
- lock_flags &= ~XFS_ILOCK_EXCL;
- ASSERT(lock_flags == XFS_IOLOCK_EXCL || !need_iolock);
+ code = -block_truncate_page(inode->i_mapping, iattr->ia_size,
+ xfs_get_blocks);
+ if (code)
goto error_return;
- }
+
tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_SIZE);
- if ((code = xfs_trans_reserve(tp, 0,
- XFS_ITRUNCATE_LOG_RES(mp), 0,
- XFS_TRANS_PERM_LOG_RES,
- XFS_ITRUNCATE_LOG_COUNT))) {
- xfs_trans_cancel(tp, 0);
- if (need_iolock)
- xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- return code;
- }
+ code = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
+ XFS_TRANS_PERM_LOG_RES,
+ XFS_ITRUNCATE_LOG_COUNT);
+ if (code)
+ goto error_return;
+
+ truncate_setsize(inode, iattr->ia_size);
+
commit_flags = XFS_TRANS_RELEASE_LOG_RES;
+ lock_flags |= XFS_ILOCK_EXCL;
+
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip);
--
GitLab
From b5fc510c48f631882ccec3c0f02a25d5b67de09f Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 4 Jul 2010 12:24:09 +0400
Subject: [PATCH 562/863] get rid of file_fsync()
Copy and simplify in the only two users remaining.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hfs/inode.c | 26 +++++++++++++++++++++++++-
fs/hfsplus/hfsplus_fs.h | 1 +
fs/hfsplus/inode.c | 27 ++++++++++++++++++++++++++-
fs/hfsplus/super.c | 2 +-
fs/sync.c | 25 -------------------------
include/linux/buffer_head.h | 1 -
6 files changed, 53 insertions(+), 29 deletions(-)
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 87de671baa832..93ceec8fbb8f0 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -625,6 +625,30 @@ int hfs_inode_setattr(struct dentry *dentry, struct iattr * attr)
return 0;
}
+static int hfs_file_fsync(struct file *filp, int datasync)
+{
+ struct inode *inode = filp->f_mapping->host;
+ struct super_block * sb;
+ int ret, err;
+
+ /* sync the inode to buffers */
+ ret = write_inode_now(inode, 0);
+
+ /* sync the superblock to buffers */
+ sb = inode->i_sb;
+ if (sb->s_dirt) {
+ lock_super(sb);
+ sb->s_dirt = 0;
+ if (!(sb->s_flags & MS_RDONLY))
+ hfs_mdb_commit(sb);
+ unlock_super(sb);
+ }
+ /* .. finally sync the buffers to disk */
+ err = sync_blockdev(sb->s_bdev);
+ if (!ret)
+ ret = err;
+ return ret;
+}
static const struct file_operations hfs_file_operations = {
.llseek = generic_file_llseek,
@@ -634,7 +658,7 @@ static const struct file_operations hfs_file_operations = {
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
.splice_read = generic_file_splice_read,
- .fsync = file_fsync,
+ .fsync = hfs_file_fsync,
.open = hfs_file_open,
.release = hfs_file_release,
};
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index 6505c30ad9654..dc856be3c2b01 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -351,6 +351,7 @@ int hfsplus_show_options(struct seq_file *, struct vfsmount *);
/* super.c */
struct inode *hfsplus_iget(struct super_block *, unsigned long);
+int hfsplus_sync_fs(struct super_block *sb, int wait);
/* tables.c */
extern u16 hfsplus_case_fold_table[];
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 654c5a8ddf1cf..c5a979d62c657 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -311,6 +311,31 @@ static int hfsplus_setattr(struct dentry *dentry, struct iattr *attr)
return 0;
}
+static int hfsplus_file_fsync(struct file *filp, int datasync)
+{
+ struct inode *inode = filp->f_mapping->host;
+ struct super_block * sb;
+ int ret, err;
+
+ /* sync the inode to buffers */
+ ret = write_inode_now(inode, 0);
+
+ /* sync the superblock to buffers */
+ sb = inode->i_sb;
+ if (sb->s_dirt) {
+ if (!(sb->s_flags & MS_RDONLY))
+ hfsplus_sync_fs(sb, 1);
+ else
+ sb->s_dirt = 0;
+ }
+
+ /* .. finally sync the buffers to disk */
+ err = sync_blockdev(sb->s_bdev);
+ if (!ret)
+ ret = err;
+ return ret;
+}
+
static const struct inode_operations hfsplus_file_inode_operations = {
.lookup = hfsplus_file_lookup,
.truncate = hfsplus_file_truncate,
@@ -328,7 +353,7 @@ static const struct file_operations hfsplus_file_operations = {
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
.splice_read = generic_file_splice_read,
- .fsync = file_fsync,
+ .fsync = hfsplus_file_fsync,
.open = hfsplus_file_open,
.release = hfsplus_file_release,
.unlocked_ioctl = hfsplus_ioctl,
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 74b473a8ef929..a32c241e4e456 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -154,7 +154,7 @@ static void hfsplus_clear_inode(struct inode *inode)
}
}
-static int hfsplus_sync_fs(struct super_block *sb, int wait)
+int hfsplus_sync_fs(struct super_block *sb, int wait)
{
struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
diff --git a/fs/sync.c b/fs/sync.c
index 15aa6f03b2da1..ba76b9623e7e8 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -128,31 +128,6 @@ void emergency_sync(void)
}
}
-/*
- * Generic function to fsync a file.
- */
-int file_fsync(struct file *filp, int datasync)
-{
- struct inode *inode = filp->f_mapping->host;
- struct super_block * sb;
- int ret, err;
-
- /* sync the inode to buffers */
- ret = write_inode_now(inode, 0);
-
- /* sync the superblock to buffers */
- sb = inode->i_sb;
- if (sb->s_dirt && sb->s_op->write_super)
- sb->s_op->write_super(sb);
-
- /* .. finally sync the buffers to disk */
- err = sync_blockdev(sb->s_bdev);
- if (!ret)
- ret = err;
- return ret;
-}
-EXPORT_SYMBOL(file_fsync);
-
/**
* vfs_fsync_range - helper to sync a range of data & metadata to disk
* @file: file to sync
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 3f69054f86d97..620f1d1088cb0 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -225,7 +225,6 @@ int block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
void block_sync_page(struct page *);
sector_t generic_block_bmap(struct address_space *, sector_t, get_block_t *);
int block_truncate_page(struct address_space *, loff_t, get_block_t *);
-int file_fsync(struct file *, int);
int nobh_write_begin(struct address_space *, loff_t, unsigned, unsigned,
struct page **, void **, get_block_t*);
int nobh_write_end(struct file *, struct address_space *,
--
GitLab
From a4ffdde6e56fdf8c34ddadc2674d6eb978083369 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 2 Jun 2010 17:38:30 -0400
Subject: [PATCH 563/863] simplify checks for I_CLEAR/I_FREEING
add I_CLEAR instead of replacing I_FREEING with it. I_CLEAR is
equivalent to I_FREEING for almost all code looking at either;
it's there to keep track of having called clear_inode() exactly
once per inode lifetime, at some point after having set I_FREEING.
I_CLEAR and I_FREEING never get set at the same time with the
current code, so we can switch to setting i_flags to I_FREEING | I_CLEAR
instead of I_CLEAR without loss of information. As the result of
such change, checks become simpler and the amount of code that needs
to know about I_CLEAR shrinks a lot.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/btrfs/inode.c | 2 +-
fs/drop_caches.c | 2 +-
fs/fs-writeback.c | 8 ++++----
fs/gfs2/inode.c | 2 +-
fs/inode.c | 16 ++++++++--------
fs/nilfs2/gcdat.c | 2 +-
fs/notify/inode_mark.c | 6 +++---
fs/notify/inotify/inotify.c | 7 +++----
fs/quota/dquot.c | 2 +-
fs/xfs/linux-2.6/xfs_iops.c | 4 ++--
include/linux/fs.h | 4 ++--
11 files changed, 27 insertions(+), 28 deletions(-)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 7f9e0536db1ac..95eac01169637 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3860,7 +3860,7 @@ static void inode_tree_add(struct inode *inode)
p = &parent->rb_right;
else {
WARN_ON(!(entry->vfs_inode.i_state &
- (I_WILL_FREE | I_FREEING | I_CLEAR)));
+ (I_WILL_FREE | I_FREEING)));
rb_erase(parent, &root->inode_tree);
RB_CLEAR_NODE(parent);
spin_unlock(&root->inode_lock);
diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index 83c4f600786a8..2195c213ab2f5 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -18,7 +18,7 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
spin_lock(&inode_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
if (inode->i_mapping->nrpages == 0)
continue;
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index d5be1693ac938..7608880b5c586 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -352,7 +352,7 @@ writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
spin_lock(&inode_lock);
inode->i_state &= ~I_SYNC;
- if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
+ if (!(inode->i_state & I_FREEING)) {
if ((inode->i_state & I_DIRTY_PAGES) && wbc->for_kupdate) {
/*
* More pages get dirtied by a fast dirtier.
@@ -499,7 +499,7 @@ static int writeback_sb_inodes(struct super_block *sb, struct bdi_writeback *wb,
if (inode_dirtied_after(inode, wbc->wb_start))
return 1;
- BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
+ BUG_ON(inode->i_state & I_FREEING);
__iget(inode);
pages_skipped = wbc->pages_skipped;
writeback_single_inode(inode, wbc);
@@ -935,7 +935,7 @@ void __mark_inode_dirty(struct inode *inode, int flags)
if (hlist_unhashed(&inode->i_hash))
goto out;
}
- if (inode->i_state & (I_FREEING|I_CLEAR))
+ if (inode->i_state & I_FREEING)
goto out;
/*
@@ -1001,7 +1001,7 @@ static void wait_sb_inodes(struct super_block *sb)
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
struct address_space *mapping;
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
mapping = inode->i_mapping;
if (mapping->nrpages == 0)
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 6c023a3b5d257..08140f185a379 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -84,7 +84,7 @@ static int iget_skip_test(struct inode *inode, void *opaque)
struct gfs2_skip_data *data = opaque;
if (ip->i_no_addr == data->no_addr) {
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)){
+ if (inode->i_state & (I_FREEING|I_WILL_FREE)){
data->skipped = 1;
return 0;
}
diff --git a/fs/inode.c b/fs/inode.c
index 722860b323a9b..71fe079ca32ac 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -317,7 +317,7 @@ void clear_inode(struct inode *inode)
bd_forget(inode);
if (S_ISCHR(inode->i_mode) && inode->i_cdev)
cd_forget(inode);
- inode->i_state = I_CLEAR;
+ inode->i_state = I_FREEING | I_CLEAR;
}
EXPORT_SYMBOL(clear_inode);
@@ -553,7 +553,7 @@ static struct inode *find_inode(struct super_block *sb,
continue;
if (!test(inode, data))
continue;
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) {
+ if (inode->i_state & (I_FREEING|I_WILL_FREE)) {
__wait_on_freeing_inode(inode);
goto repeat;
}
@@ -578,7 +578,7 @@ static struct inode *find_inode_fast(struct super_block *sb,
continue;
if (inode->i_sb != sb)
continue;
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) {
+ if (inode->i_state & (I_FREEING|I_WILL_FREE)) {
__wait_on_freeing_inode(inode);
goto repeat;
}
@@ -840,7 +840,7 @@ EXPORT_SYMBOL(iunique);
struct inode *igrab(struct inode *inode)
{
spin_lock(&inode_lock);
- if (!(inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)))
+ if (!(inode->i_state & (I_FREEING|I_WILL_FREE)))
__iget(inode);
else
/*
@@ -1089,7 +1089,7 @@ int insert_inode_locked(struct inode *inode)
continue;
if (old->i_sb != sb)
continue;
- if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+ if (old->i_state & (I_FREEING|I_WILL_FREE))
continue;
break;
}
@@ -1128,7 +1128,7 @@ int insert_inode_locked4(struct inode *inode, unsigned long hashval,
continue;
if (!test(old, data))
continue;
- if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+ if (old->i_state & (I_FREEING|I_WILL_FREE))
continue;
break;
}
@@ -1218,7 +1218,7 @@ void generic_delete_inode(struct inode *inode)
hlist_del_init(&inode->i_hash);
spin_unlock(&inode_lock);
wake_up_inode(inode);
- BUG_ON(inode->i_state != I_CLEAR);
+ BUG_ON(inode->i_state != (I_FREEING | I_CLEAR));
destroy_inode(inode);
}
EXPORT_SYMBOL(generic_delete_inode);
@@ -1322,7 +1322,7 @@ static inline void iput_final(struct inode *inode)
void iput(struct inode *inode)
{
if (inode) {
- BUG_ON(inode->i_state == I_CLEAR);
+ BUG_ON(inode->i_state & I_CLEAR);
if (atomic_dec_and_lock(&inode->i_count, &inode_lock))
iput_final(inode);
diff --git a/fs/nilfs2/gcdat.c b/fs/nilfs2/gcdat.c
index dd5f7e0a95f66..84a45d1d5464a 100644
--- a/fs/nilfs2/gcdat.c
+++ b/fs/nilfs2/gcdat.c
@@ -78,7 +78,7 @@ void nilfs_clear_gcdat_inode(struct the_nilfs *nilfs)
struct inode *gcdat = nilfs->ns_gc_dat;
struct nilfs_inode_info *gii = NILFS_I(gcdat);
- gcdat->i_state = I_CLEAR;
+ gcdat->i_state = I_FREEING | I_CLEAR;
gii->i_flags = 0;
nilfs_palloc_clear_cache(gcdat);
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
index 0399bcbe09c83..152b83ec005d1 100644
--- a/fs/notify/inode_mark.c
+++ b/fs/notify/inode_mark.c
@@ -369,11 +369,11 @@ void fsnotify_unmount_inodes(struct list_head *list)
struct inode *need_iput_tmp;
/*
- * We cannot __iget() an inode in state I_CLEAR, I_FREEING,
+ * We cannot __iget() an inode in state I_FREEING,
* I_WILL_FREE, or I_NEW which is fine because by that point
* the inode cannot have any associated watches.
*/
- if (inode->i_state & (I_CLEAR|I_FREEING|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
/*
@@ -397,7 +397,7 @@ void fsnotify_unmount_inodes(struct list_head *list)
/* In case the dropping of a reference would nuke next_i. */
if ((&next_i->i_sb_list != list) &&
atomic_read(&next_i->i_count) &&
- !(next_i->i_state & (I_CLEAR | I_FREEING | I_WILL_FREE))) {
+ !(next_i->i_state & (I_FREEING | I_WILL_FREE))) {
__iget(next_i);
need_iput = next_i;
}
diff --git a/fs/notify/inotify/inotify.c b/fs/notify/inotify/inotify.c
index 27b75ebc74609..cf6b0429a2573 100644
--- a/fs/notify/inotify/inotify.c
+++ b/fs/notify/inotify/inotify.c
@@ -377,11 +377,11 @@ void inotify_unmount_inodes(struct list_head *list)
struct list_head *watches;
/*
- * We cannot __iget() an inode in state I_CLEAR, I_FREEING,
+ * We cannot __iget() an inode in state I_FREEING,
* I_WILL_FREE, or I_NEW which is fine because by that point
* the inode cannot have any associated watches.
*/
- if (inode->i_state & (I_CLEAR|I_FREEING|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
/*
@@ -403,8 +403,7 @@ void inotify_unmount_inodes(struct list_head *list)
/* In case the dropping of a reference would nuke next_i. */
if ((&next_i->i_sb_list != list) &&
atomic_read(&next_i->i_count) &&
- !(next_i->i_state & (I_CLEAR | I_FREEING |
- I_WILL_FREE))) {
+ !(next_i->i_state & (I_FREEING|I_WILL_FREE))) {
__iget(next_i);
need_iput = next_i;
}
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 437d2ca2de973..5cec3e2348f1a 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -885,7 +885,7 @@ static void add_dquot_ref(struct super_block *sb, int type)
spin_lock(&inode_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
- if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
#ifdef CONFIG_QUOTA_DEBUG
if (unlikely(inode_get_rsv_space(inode) > 0))
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 62dd349faceeb..68be25dcd3018 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -80,7 +80,7 @@ xfs_mark_inode_dirty_sync(
{
struct inode *inode = VFS_I(ip);
- if (!(inode->i_state & (I_WILL_FREE|I_FREEING|I_CLEAR)))
+ if (!(inode->i_state & (I_WILL_FREE|I_FREEING)))
mark_inode_dirty_sync(inode);
}
@@ -90,7 +90,7 @@ xfs_mark_inode_dirty(
{
struct inode *inode = VFS_I(ip);
- if (!(inode->i_state & (I_WILL_FREE|I_FREEING|I_CLEAR)))
+ if (!(inode->i_state & (I_WILL_FREE|I_FREEING)))
mark_inode_dirty(inode);
}
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 5547b1b027db5..218693d8d4464 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1616,8 +1616,8 @@ struct super_operations {
* I_FREEING Set when inode is about to be freed but still has dirty
* pages or buffers attached or the inode itself is still
* dirty.
- * I_CLEAR Set by clear_inode(). In this state the inode is clean
- * and can be destroyed.
+ * I_CLEAR Added by clear_inode(). In this state the inode is clean
+ * and can be destroyed. Inode keeps I_FREEING.
*
* Inodes that are I_WILL_FREE, I_FREEING or I_CLEAR are
* prohibited for many purposes. iget() must wait for
--
GitLab
From b4272d4c810532e1a4dea111433a0af56d3bd2b7 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 19:33:20 -0400
Subject: [PATCH 564/863] unify fs/inode.c callers of clear_inode()
For now, just a straightforward merge
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/inode.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index 71fe079ca32ac..60cb259697627 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -321,6 +321,19 @@ void clear_inode(struct inode *inode)
}
EXPORT_SYMBOL(clear_inode);
+static void evict(struct inode *inode, int delete)
+{
+ const struct super_operations *op = inode->i_sb->s_op;
+
+ if (delete && op->delete_inode) {
+ op->delete_inode(inode);
+ } else {
+ if (inode->i_data.nrpages)
+ truncate_inode_pages(&inode->i_data, 0);
+ clear_inode(inode);
+ }
+}
+
/*
* dispose_list - dispose of the contents of a local list
* @head: the head of the list to free
@@ -338,9 +351,7 @@ static void dispose_list(struct list_head *head)
inode = list_first_entry(head, struct inode, i_list);
list_del(&inode->i_list);
- if (inode->i_data.nrpages)
- truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ evict(inode, 0);
spin_lock(&inode_lock);
hlist_del_init(&inode->i_hash);
@@ -1194,8 +1205,6 @@ EXPORT_SYMBOL(remove_inode_hash);
*/
void generic_delete_inode(struct inode *inode)
{
- const struct super_operations *op = inode->i_sb->s_op;
-
list_del_init(&inode->i_list);
list_del_init(&inode->i_sb_list);
WARN_ON(inode->i_state & I_NEW);
@@ -1203,17 +1212,8 @@ void generic_delete_inode(struct inode *inode)
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
- if (op->delete_inode) {
- void (*delete)(struct inode *) = op->delete_inode;
- /* Filesystems implementing their own
- * s_op->delete_inode are required to call
- * truncate_inode_pages and clear_inode()
- * internally */
- delete(inode);
- } else {
- truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
- }
+ evict(inode, 1);
+
spin_lock(&inode_lock);
hlist_del_init(&inode->i_hash);
spin_unlock(&inode_lock);
@@ -1268,9 +1268,7 @@ static void generic_forget_inode(struct inode *inode)
{
if (!generic_detach_inode(inode))
return;
- if (inode->i_data.nrpages)
- truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ evict(inode, 0);
wake_up_inode(inode);
destroy_inode(inode);
}
--
GitLab
From be7ce4161f9e6bf2497f90337d1214aa6ee06e15 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 19:40:39 -0400
Subject: [PATCH 565/863] New method - evict_inode()
Hybrid of ->clear_inode() and ->delete_inode(); if present, does
all fs work to be done when in-core inode is about to be gone,
for whatever reason.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/inode.c | 4 +++-
include/linux/fs.h | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/inode.c b/fs/inode.c
index 60cb259697627..474a72f571a49 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -325,7 +325,9 @@ static void evict(struct inode *inode, int delete)
{
const struct super_operations *op = inode->i_sb->s_op;
- if (delete && op->delete_inode) {
+ if (op->evict_inode) {
+ op->evict_inode(inode);
+ } else if (delete && op->delete_inode) {
op->delete_inode(inode);
} else {
if (inode->i_data.nrpages)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 218693d8d4464..ce50be4b0b413 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1563,6 +1563,7 @@ struct super_operations {
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, struct writeback_control *wbc);
void (*drop_inode) (struct inode *);
+ void (*evict_inode) (struct inode *);
void (*delete_inode) (struct inode *);
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
--
GitLab
From 2bbbda308f5ca027d4fd721f914c0cab88d49aec Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 19:52:12 -0400
Subject: [PATCH 566/863] switch hugetlbfs to ->evict_inode()
The first spoils - hugetlb can use default ->drop_inode() now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hugetlbfs/inode.c | 22 ++--------------------
1 file changed, 2 insertions(+), 20 deletions(-)
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index d5f019d48b09e..bf1a2f400e706 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -371,29 +371,12 @@ static void truncate_hugepages(struct inode *inode, loff_t lstart)
hugetlb_unreserve_pages(inode, start, freed);
}
-static void hugetlbfs_delete_inode(struct inode *inode)
+static void hugetlbfs_evict_inode(struct inode *inode)
{
truncate_hugepages(inode, 0);
clear_inode(inode);
}
-static void hugetlbfs_forget_inode(struct inode *inode) __releases(inode_lock)
-{
- if (generic_detach_inode(inode)) {
- truncate_hugepages(inode, 0);
- clear_inode(inode);
- destroy_inode(inode);
- }
-}
-
-static void hugetlbfs_drop_inode(struct inode *inode)
-{
- if (!inode->i_nlink)
- generic_delete_inode(inode);
- else
- hugetlbfs_forget_inode(inode);
-}
-
static inline void
hugetlb_vmtruncate_list(struct prio_tree_root *root, pgoff_t pgoff)
{
@@ -713,9 +696,8 @@ static const struct inode_operations hugetlbfs_inode_operations = {
static const struct super_operations hugetlbfs_ops = {
.alloc_inode = hugetlbfs_alloc_inode,
.destroy_inode = hugetlbfs_destroy_inode,
+ .evict_inode = hugetlbfs_evict_inode,
.statfs = hugetlbfs_statfs,
- .delete_inode = hugetlbfs_delete_inode,
- .drop_inode = hugetlbfs_drop_inode,
.put_super = hugetlbfs_put_super,
.show_options = generic_show_options,
};
--
GitLab
From c6287315cb958e740466555ca5e9d007f25b39bd Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 19:56:17 -0400
Subject: [PATCH 567/863] generic_detach_inode() can be static now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/inode.c | 3 +--
include/linux/fs.h | 1 -
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index 474a72f571a49..256e620c6416a 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1234,7 +1234,7 @@ EXPORT_SYMBOL(generic_delete_inode);
*
* Returns 1 if inode should be completely destroyed.
*/
-int generic_detach_inode(struct inode *inode)
+static int generic_detach_inode(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
@@ -1264,7 +1264,6 @@ int generic_detach_inode(struct inode *inode)
spin_unlock(&inode_lock);
return 1;
}
-EXPORT_SYMBOL_GPL(generic_detach_inode);
static void generic_forget_inode(struct inode *inode)
{
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ce50be4b0b413..e0ecb8e75ebf8 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2167,7 +2167,6 @@ extern ino_t iunique(struct super_block *, ino_t);
extern int inode_needs_sync(struct inode *inode);
extern void generic_delete_inode(struct inode *inode);
extern void generic_drop_inode(struct inode *inode);
-extern int generic_detach_inode(struct inode *inode);
extern struct inode *ilookup5_nowait(struct super_block *sb,
unsigned long hashval, int (*test)(struct inode *, void *),
--
GitLab
From 661074e91b1da1ee262dfde6dd836deacccb9def Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 20:19:55 -0400
Subject: [PATCH 568/863] Take ->i_bdev/->i_cdev handling out of clear_inode()
All call chains to clear_inode() pass through evict_inode() and
clear_inode() should be called by evict_inode() exactly once.
So we can pull i_bdev/i_cdev detaching up to evict_inode() itself.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index 256e620c6416a..9aff7deaf8168 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -313,10 +313,6 @@ void clear_inode(struct inode *inode)
inode_sync_wait(inode);
if (inode->i_sb->s_op->clear_inode)
inode->i_sb->s_op->clear_inode(inode);
- if (S_ISBLK(inode->i_mode) && inode->i_bdev)
- bd_forget(inode);
- if (S_ISCHR(inode->i_mode) && inode->i_cdev)
- cd_forget(inode);
inode->i_state = I_FREEING | I_CLEAR;
}
EXPORT_SYMBOL(clear_inode);
@@ -334,6 +330,10 @@ static void evict(struct inode *inode, int delete)
truncate_inode_pages(&inode->i_data, 0);
clear_inode(inode);
}
+ if (S_ISBLK(inode->i_mode) && inode->i_bdev)
+ bd_forget(inode);
+ if (S_ISCHR(inode->i_mode) && inode->i_cdev)
+ cd_forget(inode);
}
/*
--
GitLab
From b0683aa638b3326c6fc22e5290dfa75e08bd83f5 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 20:55:25 -0400
Subject: [PATCH 569/863] new helper: end_writeback()
Essentially, the minimal variant of ->evict_inode(). It's
a trimmed-down clear_inode(), sans any fs callbacks. Once
it returns we know that no async writeback will be happening;
every ->evict_inode() instance should do that once and do that
before doing anything ->write_inode() could interfere with
(e.g. freeing the on-disk inode).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hugetlbfs/inode.c | 2 +-
fs/inode.c | 12 ++++++++++++
include/linux/fs.h | 1 +
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index bf1a2f400e706..6e5bd42f38604 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -374,7 +374,7 @@ static void truncate_hugepages(struct inode *inode, loff_t lstart)
static void hugetlbfs_evict_inode(struct inode *inode)
{
truncate_hugepages(inode, 0);
- clear_inode(inode);
+ end_writeback(inode);
}
static inline void
diff --git a/fs/inode.c b/fs/inode.c
index 9aff7deaf8168..93e7a5ecbc264 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -294,6 +294,18 @@ void __iget(struct inode *inode)
inodes_stat.nr_unused--;
}
+void end_writeback(struct inode *inode)
+{
+ might_sleep();
+ BUG_ON(inode->i_data.nrpages);
+ BUG_ON(!list_empty(&inode->i_data.private_list));
+ BUG_ON(!(inode->i_state & I_FREEING));
+ BUG_ON(inode->i_state & I_CLEAR);
+ inode_sync_wait(inode);
+ inode->i_state = I_FREEING | I_CLEAR;
+}
+EXPORT_SYMBOL(end_writeback);
+
/**
* clear_inode - clear an inode
* @inode: inode to clear
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e0ecb8e75ebf8..3c23c1dcb1bd0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2184,6 +2184,7 @@ extern void unlock_new_inode(struct inode *);
extern void __iget(struct inode * inode);
extern void iget_failed(struct inode *);
extern void clear_inode(struct inode *);
+extern void end_writeback(struct inode *);
extern void destroy_inode(struct inode *);
extern void __destroy_inode(struct inode *);
extern struct inode *new_inode(struct super_block *);
--
GitLab
From b69257f2502e046beac7b9a3086fda552eb4d7e9 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 21:02:59 -0400
Subject: [PATCH 570/863] switch hypfs to ->evict_inode()
... and since we never hash its inodes, default
->drop_inode() will work just fine.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
arch/s390/hypfs/inode.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 6b120f073043d..98a4a4c267a78 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -117,10 +117,10 @@ static struct inode *hypfs_make_inode(struct super_block *sb, int mode)
return ret;
}
-static void hypfs_drop_inode(struct inode *inode)
+static void hypfs_evict_inode(struct inode *inode)
{
+ end_writeback(inode);
kfree(inode->i_private);
- generic_delete_inode(inode);
}
static int hypfs_open(struct inode *inode, struct file *filp)
@@ -460,7 +460,7 @@ static struct file_system_type hypfs_type = {
static const struct super_operations hypfs_s_ops = {
.statfs = simple_statfs,
- .drop_inode = hypfs_drop_inode,
+ .evict_inode = hypfs_evict_inode,
.show_options = hypfs_show_options,
};
--
GitLab
From 77b8a75f5bb461951148a7211ef30eecac5cb662 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 21:19:01 -0400
Subject: [PATCH 571/863] simplify get_cramfs_inode()
simply don't hash the inodes that don't have real inumber instead of
skipping them during iget5_locked(); as the result, simple iget_locked()
would do and we can get rid of cramfs ->drop_inode() as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/cramfs/inode.c | 88 ++++++++++++++++++++---------------------------
1 file changed, 38 insertions(+), 50 deletions(-)
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index dd3634e4c9679..a53b130b366c7 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -39,66 +39,55 @@ static DEFINE_MUTEX(read_mutex);
#define CRAMINO(x) (((x)->offset && (x)->size)?(x)->offset<<2:1)
#define OFFSET(x) ((x)->i_ino)
-
-static int cramfs_iget5_test(struct inode *inode, void *opaque)
-{
- struct cramfs_inode *cramfs_inode = opaque;
- return inode->i_ino == CRAMINO(cramfs_inode) && inode->i_ino != 1;
-}
-
-static int cramfs_iget5_set(struct inode *inode, void *opaque)
+static void setup_inode(struct inode *inode, struct cramfs_inode * cramfs_inode)
{
- struct cramfs_inode *cramfs_inode = opaque;
- inode->i_ino = CRAMINO(cramfs_inode);
- return 0;
+ static struct timespec zerotime;
+ inode->i_mode = cramfs_inode->mode;
+ inode->i_uid = cramfs_inode->uid;
+ inode->i_size = cramfs_inode->size;
+ inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+ inode->i_gid = cramfs_inode->gid;
+ /* Struct copy intentional */
+ inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
+ /* inode->i_nlink is left 1 - arguably wrong for directories,
+ but it's the best we can do without reading the directory
+ contents. 1 yields the right result in GNU find, even
+ without -noleaf option. */
+ if (S_ISREG(inode->i_mode)) {
+ inode->i_fop = &generic_ro_fops;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else if (S_ISDIR(inode->i_mode)) {
+ inode->i_op = &cramfs_dir_inode_operations;
+ inode->i_fop = &cramfs_directory_operations;
+ } else if (S_ISLNK(inode->i_mode)) {
+ inode->i_op = &page_symlink_inode_operations;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else {
+ init_special_inode(inode, inode->i_mode,
+ old_decode_dev(cramfs_inode->size));
+ }
}
static struct inode *get_cramfs_inode(struct super_block *sb,
struct cramfs_inode * cramfs_inode)
{
- struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
- cramfs_iget5_test, cramfs_iget5_set,
- cramfs_inode);
- static struct timespec zerotime;
-
- if (inode && (inode->i_state & I_NEW)) {
- inode->i_mode = cramfs_inode->mode;
- inode->i_uid = cramfs_inode->uid;
- inode->i_size = cramfs_inode->size;
- inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
- inode->i_gid = cramfs_inode->gid;
- /* Struct copy intentional */
- inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
- /* inode->i_nlink is left 1 - arguably wrong for directories,
- but it's the best we can do without reading the directory
- contents. 1 yields the right result in GNU find, even
- without -noleaf option. */
- if (S_ISREG(inode->i_mode)) {
- inode->i_fop = &generic_ro_fops;
- inode->i_data.a_ops = &cramfs_aops;
- } else if (S_ISDIR(inode->i_mode)) {
- inode->i_op = &cramfs_dir_inode_operations;
- inode->i_fop = &cramfs_directory_operations;
- } else if (S_ISLNK(inode->i_mode)) {
- inode->i_op = &page_symlink_inode_operations;
- inode->i_data.a_ops = &cramfs_aops;
- } else {
- init_special_inode(inode, inode->i_mode,
- old_decode_dev(cramfs_inode->size));
+ struct inode *inode;
+ if (CRAMINO(cramfs_inode) == 1) {
+ inode = new_inode(sb);
+ if (inode) {
+ inode->i_ino = 1;
+ setup_inode(inode, cramfs_inode);
+ }
+ } else {
+ inode = iget_locked(sb, CRAMINO(cramfs_inode));
+ if (inode) {
+ setup_inode(inode, cramfs_inode);
+ unlock_new_inode(inode);
}
- unlock_new_inode(inode);
}
return inode;
}
-static void cramfs_drop_inode(struct inode *inode)
-{
- if (inode->i_ino == 1)
- generic_delete_inode(inode);
- else
- generic_drop_inode(inode);
-}
-
/*
* We have our own block cache: don't fill up the buffer cache
* with the rom-image, because the way the filesystem is set
@@ -542,7 +531,6 @@ static const struct super_operations cramfs_ops = {
.put_super = cramfs_put_super,
.remount_fs = cramfs_remount,
.statfs = cramfs_statfs,
- .drop_inode = cramfs_drop_inode,
};
static int cramfs_get_sb(struct file_system_type *fs_type,
--
GitLab
From 8267952b362b67a5cb5371d6894a772a13e6874c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 22:17:56 -0400
Subject: [PATCH 572/863] switch procfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/proc/inode.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index aea8502e58a3a..23561cda72454 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -25,11 +25,12 @@
#include "internal.h"
-static void proc_delete_inode(struct inode *inode)
+static void proc_evict_inode(struct inode *inode)
{
struct proc_dir_entry *de;
truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
/* Stop tracking associated processes */
put_pid(PROC_I(inode)->pid);
@@ -40,7 +41,6 @@ static void proc_delete_inode(struct inode *inode)
pde_put(de);
if (PROC_I(inode)->sysctl)
sysctl_head_put(PROC_I(inode)->sysctl);
- clear_inode(inode);
}
struct vfsmount *proc_mnt;
@@ -91,7 +91,7 @@ static const struct super_operations proc_sops = {
.alloc_inode = proc_alloc_inode,
.destroy_inode = proc_destroy_inode,
.drop_inode = generic_delete_inode,
- .delete_inode = proc_delete_inode,
+ .evict_inode = proc_evict_inode,
.statfs = simple_statfs,
};
--
GitLab
From 01cd9fef6eb3caae06415861de5b53224b722549 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 22:21:54 -0400
Subject: [PATCH 573/863] switch sysfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/sysfs/inode.c | 6 +++---
fs/sysfs/mount.c | 2 +-
fs/sysfs/sysfs.h | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 7e187fbd3d473..cffb1fd8ba33f 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -312,15 +312,15 @@ struct inode * sysfs_get_inode(struct super_block *sb, struct sysfs_dirent *sd)
* The sysfs_dirent serves as both an inode and a directory entry for sysfs.
* To prevent the sysfs inode numbers from being freed prematurely we take a
* reference to sysfs_dirent from the sysfs inode. A
- * super_operations.delete_inode() implementation is needed to drop that
+ * super_operations.evict_inode() implementation is needed to drop that
* reference upon inode destruction.
*/
-void sysfs_delete_inode(struct inode *inode)
+void sysfs_evict_inode(struct inode *inode)
{
struct sysfs_dirent *sd = inode->i_private;
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ end_writeback(inode);
sysfs_put(sd);
}
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index 281c0c9bc39f8..f2af22574c509 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -29,7 +29,7 @@ struct kmem_cache *sysfs_dir_cachep;
static const struct super_operations sysfs_ops = {
.statfs = simple_statfs,
.drop_inode = generic_delete_inode,
- .delete_inode = sysfs_delete_inode,
+ .evict_inode = sysfs_evict_inode,
};
struct sysfs_dirent sysfs_root = {
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index 6a13105b55949..d9be60a2e9561 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -198,7 +198,7 @@ static inline void __sysfs_put(struct sysfs_dirent *sd)
* inode.c
*/
struct inode *sysfs_get_inode(struct super_block *sb, struct sysfs_dirent *sd);
-void sysfs_delete_inode(struct inode *inode);
+void sysfs_evict_inode(struct inode *inode);
int sysfs_sd_setattr(struct sysfs_dirent *sd, struct iattr *iattr);
int sysfs_permission(struct inode *inode, int mask);
int sysfs_setattr(struct dentry *dentry, struct iattr *iattr);
--
GitLab
From 5ccb4a78d8c0e27985afec32cc4894d48e7b876e Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 22:27:38 -0400
Subject: [PATCH 574/863] switch minix to ->evict_inode(), fix
write_inode/delete_inode race
We need to wait for completion of possible writeback in progress
before we clear on-disk inode during deletion.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/minix/bitmap.c | 6 ++----
fs/minix/inode.c | 15 ++++++++++-----
2 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c
index 482779fe4e7cf..3f32bcb0d9bd5 100644
--- a/fs/minix/bitmap.c
+++ b/fs/minix/bitmap.c
@@ -200,13 +200,13 @@ void minix_free_inode(struct inode * inode)
ino = inode->i_ino;
if (ino < 1 || ino > sbi->s_ninodes) {
printk("minix_free_inode: inode 0 or nonexistent inode\n");
- goto out;
+ return;
}
bit = ino & ((1<<k) - 1);
ino >>= k;
if (ino >= sbi->s_imap_blocks) {
printk("minix_free_inode: nonexistent imap in superblock\n");
- goto out;
+ return;
}
minix_clear_inode(inode); /* clear on-disk copy */
@@ -217,8 +217,6 @@ void minix_free_inode(struct inode * inode)
printk("minix_free_inode: bit %lu already cleared\n", bit);
spin_unlock(&bitmap_lock);
mark_buffer_dirty(bh);
- out:
- clear_inode(inode); /* clear in-memory copy */
}
struct inode *minix_new_inode(const struct inode *dir, int mode, int *error)
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 125062f55ef2d..e39d6bf2e8fbc 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -24,12 +24,17 @@ static int minix_write_inode(struct inode *inode,
static int minix_statfs(struct dentry *dentry, struct kstatfs *buf);
static int minix_remount (struct super_block * sb, int * flags, char * data);
-static void minix_delete_inode(struct inode *inode)
+static void minix_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
- inode->i_size = 0;
- minix_truncate(inode);
- minix_free_inode(inode);
+ if (!inode->i_nlink) {
+ inode->i_size = 0;
+ minix_truncate(inode);
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
+ if (!inode->i_nlink)
+ minix_free_inode(inode);
}
static void minix_put_super(struct super_block *sb)
@@ -96,7 +101,7 @@ static const struct super_operations minix_sops = {
.alloc_inode = minix_alloc_inode,
.destroy_inode = minix_destroy_inode,
.write_inode = minix_write_inode,
- .delete_inode = minix_delete_inode,
+ .evict_inode = minix_evict_inode,
.put_super = minix_put_super,
.statfs = minix_statfs,
.remount_fs = minix_remount,
--
GitLab
From 3889717d2851bf38015c0b291026c07c02264623 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu, 22 Jul 2010 01:13:36 +0400
Subject: [PATCH 575/863] ext2: switch to dquot_free_block_nodirty()
brute-force conversion
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ext2/balloc.c | 12 ++++++++----
fs/ext2/xattr.c | 12 ++++++++----
2 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c
index e8766a3967760..db69c1206f13c 100644
--- a/fs/ext2/balloc.c
+++ b/fs/ext2/balloc.c
@@ -571,7 +571,8 @@ void ext2_free_blocks (struct inode * inode, unsigned long block,
error_return:
brelse(bitmap_bh);
release_blocks(sb, freed);
- dquot_free_block(inode, freed);
+ dquot_free_block_nodirty(inode, freed);
+ mark_inode_dirty(inode);
}
/**
@@ -1418,7 +1419,8 @@ ext2_fsblk_t ext2_new_blocks(struct inode *inode, ext2_fsblk_t goal,
*errp = 0;
brelse(bitmap_bh);
- dquot_free_block(inode, *count-num);
+ dquot_free_block_nodirty(inode, *count-num);
+ mark_inode_dirty(inode);
*count = num;
return ret_block;
@@ -1428,8 +1430,10 @@ ext2_fsblk_t ext2_new_blocks(struct inode *inode, ext2_fsblk_t goal,
/*
* Undo the block allocation
*/
- if (!performed_allocation)
- dquot_free_block(inode, *count);
+ if (!performed_allocation) {
+ dquot_free_block_nodirty(inode, *count);
+ mark_inode_dirty(inode);
+ }
brelse(bitmap_bh);
return 0;
}
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index 7c3915780b19d..0fa24e814d8a7 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -703,8 +703,10 @@ ext2_xattr_set2(struct inode *inode, struct buffer_head *old_bh,
* written (only some dirty data were not) so we just proceed
* as if nothing happened and cleanup the unused block */
if (error && error != -ENOSPC) {
- if (new_bh && new_bh != old_bh)
- dquot_free_block(inode, 1);
+ if (new_bh && new_bh != old_bh) {
+ dquot_free_block_nodirty(inode, 1);
+ mark_inode_dirty(inode);
+ }
goto cleanup;
}
} else
@@ -736,7 +738,8 @@ ext2_xattr_set2(struct inode *inode, struct buffer_head *old_bh,
le32_add_cpu(&HDR(old_bh)->h_refcount, -1);
if (ce)
mb_cache_entry_release(ce);
- dquot_free_block(inode, 1);
+ dquot_free_block_nodirty(inode, 1);
+ mark_inode_dirty(inode);
mark_buffer_dirty(old_bh);
ea_bdebug(old_bh, "refcount now=%d",
le32_to_cpu(HDR(old_bh)->h_refcount));
@@ -799,7 +802,8 @@ ext2_xattr_delete_inode(struct inode *inode)
mark_buffer_dirty(bh);
if (IS_SYNC(inode))
sync_dirty_buffer(bh);
- dquot_free_block(inode, 1);
+ dquot_free_block_nodirty(inode, 1);
+ mark_inode_dirty(inode);
}
EXT2_I(inode)->i_file_acl = 0;
--
GitLab
From addacc7d6f0f0bcce12adf9fe9e6455e1dfd74da Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu, 22 Jul 2010 01:19:42 +0400
Subject: [PATCH 576/863] Take dirtying the inode to callers of
ext2_free_blocks()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ext2/balloc.c | 1 -
fs/ext2/inode.c | 6 ++++--
fs/ext2/xattr.c | 3 +++
3 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c
index db69c1206f13c..c6c684b44ea1c 100644
--- a/fs/ext2/balloc.c
+++ b/fs/ext2/balloc.c
@@ -572,7 +572,6 @@ void ext2_free_blocks (struct inode * inode, unsigned long block,
brelse(bitmap_bh);
release_blocks(sb, freed);
dquot_free_block_nodirty(inode, freed);
- mark_inode_dirty(inode);
}
/**
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 069620b30d4d8..e8af26dd67156 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -423,6 +423,8 @@ static int ext2_alloc_blocks(struct inode *inode,
failed_out:
for (i = 0; i <index; i++)
ext2_free_blocks(inode, new_blocks[i], 1);
+ if (index)
+ mark_inode_dirty(inode);
return ret;
}
@@ -993,8 +995,8 @@ static inline void ext2_free_data(struct inode *inode, __le32 *p, __le32 *q)
else if (block_to_free == nr - count)
count++;
else {
- mark_inode_dirty(inode);
ext2_free_blocks (inode, block_to_free, count);
+ mark_inode_dirty(inode);
free_this:
block_to_free = nr;
count = 1;
@@ -1002,8 +1004,8 @@ static inline void ext2_free_data(struct inode *inode, __le32 *p, __le32 *q)
}
}
if (count > 0) {
- mark_inode_dirty(inode);
ext2_free_blocks (inode, block_to_free, count);
+ mark_inode_dirty(inode);
}
}
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index 0fa24e814d8a7..25ff041058a74 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -674,6 +674,7 @@ ext2_xattr_set2(struct inode *inode, struct buffer_head *old_bh,
new_bh = sb_getblk(sb, block);
if (!new_bh) {
ext2_free_blocks(inode, block, 1);
+ mark_inode_dirty(inode);
error = -EIO;
goto cleanup;
}
@@ -729,6 +730,7 @@ ext2_xattr_set2(struct inode *inode, struct buffer_head *old_bh,
mb_cache_entry_free(ce);
ea_bdebug(old_bh, "freeing");
ext2_free_blocks(inode, old_bh->b_blocknr, 1);
+ mark_inode_dirty(inode);
/* We let our caller release old_bh, so we
* need to duplicate the buffer before. */
get_bh(old_bh);
@@ -789,6 +791,7 @@ ext2_xattr_delete_inode(struct inode *inode)
if (ce)
mb_cache_entry_free(ce);
ext2_free_blocks(inode, EXT2_I(inode)->i_file_acl, 1);
+ mark_inode_dirty(inode);
get_bh(bh);
bforget(bh);
unlock_buffer(bh);
--
GitLab
From 3937871d91e4f43e4aaf0b214c68a7857c0e6e80 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu, 22 Jul 2010 01:22:47 +0400
Subject: [PATCH 577/863] Don't dirty the victim in ext2_xattr_delete_inode()
... it's beyond fs-writeback reach already - writeback won't
be started at that point.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ext2/xattr.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index 25ff041058a74..5ab87e6edffce 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -791,7 +791,6 @@ ext2_xattr_delete_inode(struct inode *inode)
if (ce)
mb_cache_entry_free(ce);
ext2_free_blocks(inode, EXT2_I(inode)->i_file_acl, 1);
- mark_inode_dirty(inode);
get_bh(bh);
bforget(bh);
unlock_buffer(bh);
@@ -806,7 +805,6 @@ ext2_xattr_delete_inode(struct inode *inode)
if (IS_SYNC(inode))
sync_dirty_buffer(bh);
dquot_free_block_nodirty(inode, 1);
- mark_inode_dirty(inode);
}
EXT2_I(inode)->i_file_acl = 0;
--
GitLab
From 72edc4d0873ba5165c0759264298bf5f55351c7a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 4 Jun 2010 23:32:28 -0400
Subject: [PATCH 578/863] merge ext2 delete_inode and clear_inode, switch to
->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ext2/ext2.h | 2 +-
fs/ext2/ialloc.c | 13 ++++---------
fs/ext2/inode.c | 44 ++++++++++++++++++++++++++++++--------------
fs/ext2/super.c | 14 +-------------
4 files changed, 36 insertions(+), 37 deletions(-)
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 8f53d11bf9578..416daa62242c5 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -119,7 +119,7 @@ extern unsigned long ext2_count_free (struct buffer_head *, unsigned);
/* inode.c */
extern struct inode *ext2_iget (struct super_block *, unsigned long);
extern int ext2_write_inode (struct inode *, struct writeback_control *);
-extern void ext2_delete_inode (struct inode *);
+extern void ext2_evict_inode(struct inode *);
extern int ext2_sync_inode (struct inode *);
extern int ext2_get_block(struct inode *, sector_t, struct buffer_head *, int);
extern int ext2_setattr (struct dentry *, struct iattr *);
diff --git a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
index 938dbc739d00e..ad70479aabff3 100644
--- a/fs/ext2/ialloc.c
+++ b/fs/ext2/ialloc.c
@@ -118,19 +118,14 @@ void ext2_free_inode (struct inode * inode)
* Note: we must free any quota before locking the superblock,
* as writing the quota to disk may need the lock as well.
*/
- if (!is_bad_inode(inode)) {
- /* Quota is already initialized in iput() */
- ext2_xattr_delete_inode(inode);
- dquot_free_inode(inode);
- dquot_drop(inode);
- }
+ /* Quota is already initialized in iput() */
+ ext2_xattr_delete_inode(inode);
+ dquot_free_inode(inode);
+ dquot_drop(inode);
es = EXT2_SB(sb)->s_es;
is_directory = S_ISDIR(inode->i_mode);
- /* Do this BEFORE marking the inode not in use or returning an error */
- clear_inode (inode);
-
if (ino < EXT2_FIRST_INO(sb) ||
ino > le32_to_cpu(es->s_inodes_count)) {
ext2_error (sb, "ext2_free_inode",
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index e8af26dd67156..940c961688687 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -69,26 +69,42 @@ static void ext2_write_failed(struct address_space *mapping, loff_t to)
/*
* Called at the last iput() if i_nlink is zero.
*/
-void ext2_delete_inode (struct inode * inode)
+void ext2_evict_inode(struct inode * inode)
{
- if (!is_bad_inode(inode))
+ struct ext2_block_alloc_info *rsv;
+ int want_delete = 0;
+
+ if (!inode->i_nlink && !is_bad_inode(inode)) {
+ want_delete = 1;
dquot_initialize(inode);
+ } else {
+ dquot_drop(inode);
+ }
+
truncate_inode_pages(&inode->i_data, 0);
- if (is_bad_inode(inode))
- goto no_delete;
- EXT2_I(inode)->i_dtime = get_seconds();
- mark_inode_dirty(inode);
- __ext2_write_inode(inode, inode_needs_sync(inode));
+ if (want_delete) {
+ /* set dtime */
+ EXT2_I(inode)->i_dtime = get_seconds();
+ mark_inode_dirty(inode);
+ __ext2_write_inode(inode, inode_needs_sync(inode));
+ /* truncate to 0 */
+ inode->i_size = 0;
+ if (inode->i_blocks)
+ ext2_truncate_blocks(inode, 0);
+ }
- inode->i_size = 0;
- if (inode->i_blocks)
- ext2_truncate_blocks(inode, 0);
- ext2_free_inode (inode);
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
+
+ ext2_discard_reservation(inode);
+ rsv = EXT2_I(inode)->i_block_alloc_info;
+ EXT2_I(inode)->i_block_alloc_info = NULL;
+ if (unlikely(rsv))
+ kfree(rsv);
- return;
-no_delete:
- clear_inode(inode); /* We must guarantee clearing of inode... */
+ if (want_delete)
+ ext2_free_inode(inode);
}
typedef struct {
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 7ff43f4a59cd4..1ec602673ea8d 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -195,17 +195,6 @@ static void destroy_inodecache(void)
kmem_cache_destroy(ext2_inode_cachep);
}
-static void ext2_clear_inode(struct inode *inode)
-{
- struct ext2_block_alloc_info *rsv = EXT2_I(inode)->i_block_alloc_info;
-
- dquot_drop(inode);
- ext2_discard_reservation(inode);
- EXT2_I(inode)->i_block_alloc_info = NULL;
- if (unlikely(rsv))
- kfree(rsv);
-}
-
static int ext2_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
struct super_block *sb = vfs->mnt_sb;
@@ -299,13 +288,12 @@ static const struct super_operations ext2_sops = {
.alloc_inode = ext2_alloc_inode,
.destroy_inode = ext2_destroy_inode,
.write_inode = ext2_write_inode,
- .delete_inode = ext2_delete_inode,
+ .evict_inode = ext2_evict_inode,
.put_super = ext2_put_super,
.write_super = ext2_write_super,
.sync_fs = ext2_sync_fs,
.statfs = ext2_statfs,
.remount_fs = ext2_remount,
- .clear_inode = ext2_clear_inode,
.show_options = ext2_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext2_quota_read,
--
GitLab
From 6d8af64c1c5ad4fd119b371ae70c114ee1f443b1 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 5 Jun 2010 16:29:45 -0400
Subject: [PATCH 579/863] switch mqueue to ->evict_inode()
... and since the inodes are never hashed, we can use default ->drop_inode()
just fine.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
ipc/mqueue.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index c93fd3faac2d2..c60e519e29176 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -158,7 +158,7 @@ static struct inode *mqueue_get_inode(struct super_block *sb,
u->mq_bytes + mq_bytes >
task_rlimit(p, RLIMIT_MSGQUEUE)) {
spin_unlock(&mq_lock);
- /* mqueue_delete_inode() releases info->messages */
+ /* mqueue_evict_inode() releases info->messages */
goto out_inode;
}
u->mq_bytes += mq_bytes;
@@ -241,7 +241,7 @@ static void mqueue_destroy_inode(struct inode *inode)
kmem_cache_free(mqueue_inode_cachep, MQUEUE_I(inode));
}
-static void mqueue_delete_inode(struct inode *inode)
+static void mqueue_evict_inode(struct inode *inode)
{
struct mqueue_inode_info *info;
struct user_struct *user;
@@ -249,10 +249,11 @@ static void mqueue_delete_inode(struct inode *inode)
int i;
struct ipc_namespace *ipc_ns;
- if (S_ISDIR(inode->i_mode)) {
- clear_inode(inode);
+ end_writeback(inode);
+
+ if (S_ISDIR(inode->i_mode))
return;
- }
+
ipc_ns = get_ns_from_inode(inode);
info = MQUEUE_I(inode);
spin_lock(&info->lock);
@@ -261,8 +262,6 @@ static void mqueue_delete_inode(struct inode *inode)
kfree(info->messages);
spin_unlock(&info->lock);
- clear_inode(inode);
-
/* Total amount of bytes accounted for the mqueue */
mq_bytes = info->attr.mq_maxmsg * (sizeof(struct msg_msg *)
+ info->attr.mq_msgsize);
@@ -1225,9 +1224,8 @@ static const struct file_operations mqueue_file_operations = {
static const struct super_operations mqueue_super_ops = {
.alloc_inode = mqueue_alloc_inode,
.destroy_inode = mqueue_destroy_inode,
+ .evict_inode = mqueue_evict_inode,
.statfs = simple_statfs,
- .delete_inode = mqueue_delete_inode,
- .drop_inode = generic_delete_inode,
};
static struct file_system_type mqueue_fs_type = {
--
GitLab
From 1f895f75dc0881592ef21488aac36cfb2b6ca1e3 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 5 Jun 2010 19:10:41 -0400
Subject: [PATCH 580/863] switch shmem.c to ->evice_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
mm/shmem.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/mm/shmem.c b/mm/shmem.c
index 33222ba256fbd..1529d8fdc23f0 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -820,7 +820,7 @@ static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
return error;
}
-static void shmem_delete_inode(struct inode *inode)
+static void shmem_evict_inode(struct inode *inode)
{
struct shmem_inode_info *info = SHMEM_I(inode);
@@ -837,7 +837,7 @@ static void shmem_delete_inode(struct inode *inode)
}
BUG_ON(inode->i_blocks);
shmem_free_inode(inode->i_sb);
- clear_inode(inode);
+ end_writeback(inode);
}
static inline int shmem_find_swp(swp_entry_t entry, swp_entry_t *dir, swp_entry_t *edir)
@@ -934,7 +934,7 @@ static int shmem_unuse_inode(struct shmem_inode_info *info, swp_entry_t entry, s
/*
* Move _head_ to start search for next from here.
- * But be careful: shmem_delete_inode checks list_empty without taking
+ * But be careful: shmem_evict_inode checks list_empty without taking
* mutex, and there's an instant in list_move_tail when info->swaplist
* would appear empty, if it were the only one on shmem_swaplist. We
* could avoid doing it if inode NULL; or use this minor optimization.
@@ -2497,7 +2497,7 @@ static const struct super_operations shmem_ops = {
.remount_fs = shmem_remount_fs,
.show_options = shmem_show_options,
#endif
- .delete_inode = shmem_delete_inode,
+ .evict_inode = shmem_evict_inode,
.drop_inode = generic_delete_inode,
.put_super = shmem_put_super,
};
--
GitLab
From d299eadc098743ea0cfbf9502fb04abf1d39ce36 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 5 Jun 2010 19:16:20 -0400
Subject: [PATCH 581/863] switch sysv to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/sysv/ialloc.c | 1 -
fs/sysv/inode.c | 15 ++++++++++-----
2 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/fs/sysv/ialloc.c b/fs/sysv/ialloc.c
index fcc498ec9b337..0c96c98bd1db2 100644
--- a/fs/sysv/ialloc.c
+++ b/fs/sysv/ialloc.c
@@ -113,7 +113,6 @@ void sysv_free_inode(struct inode * inode)
return;
}
raw_inode = sysv_raw_inode(sb, ino, &bh);
- clear_inode(inode);
if (!raw_inode) {
printk("sysv_free_inode: unable to read inode block on device "
"%s\n", inode->i_sb->s_id);
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index d4a5380b56695..613a5056e880b 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -308,12 +308,17 @@ int sysv_sync_inode(struct inode *inode)
return __sysv_write_inode(inode, 1);
}
-static void sysv_delete_inode(struct inode *inode)
+static void sysv_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
- inode->i_size = 0;
- sysv_truncate(inode);
- sysv_free_inode(inode);
+ if (!inode->i_nlink) {
+ inode->i_size = 0;
+ sysv_truncate(inode);
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
+ if (!inode->i_nlink)
+ sysv_free_inode(inode);
}
static struct kmem_cache *sysv_inode_cachep;
@@ -344,7 +349,7 @@ const struct super_operations sysv_sops = {
.alloc_inode = sysv_alloc_inode,
.destroy_inode = sysv_destroy_inode,
.write_inode = sysv_write_inode,
- .delete_inode = sysv_delete_inode,
+ .evict_inode = sysv_evict_inode,
.put_super = sysv_put_super,
.write_super = sysv_write_super,
.sync_fs = sysv_sync_fs,
--
GitLab
From d3b4f9ae184b0a3982dbe000ddf88952f090dc28 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 5 Jun 2010 19:22:50 -0400
Subject: [PATCH 582/863] switch smbfs to evict_inode()
NB: treatment of inode hash is completely braindead there
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/smbfs/inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index e338f0a5a70d7..450c919419886 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -46,7 +46,7 @@
#define SMB_TTL_DEFAULT 1000
-static void smb_delete_inode(struct inode *);
+static void smb_evict_inode(struct inode *);
static void smb_put_super(struct super_block *);
static int smb_statfs(struct dentry *, struct kstatfs *);
static int smb_show_options(struct seq_file *, struct vfsmount *);
@@ -102,7 +102,7 @@ static const struct super_operations smb_sops =
.alloc_inode = smb_alloc_inode,
.destroy_inode = smb_destroy_inode,
.drop_inode = generic_delete_inode,
- .delete_inode = smb_delete_inode,
+ .evict_inode = smb_evict_inode,
.put_super = smb_put_super,
.statfs = smb_statfs,
.show_options = smb_show_options,
@@ -324,15 +324,15 @@ smb_revalidate_inode(struct dentry *dentry)
* All blocking cleanup operations need to go here to avoid races.
*/
static void
-smb_delete_inode(struct inode *ino)
+smb_evict_inode(struct inode *ino)
{
DEBUG1("ino=%ld\n", ino->i_ino);
truncate_inode_pages(&ino->i_data, 0);
+ end_writeback(ino);
lock_kernel();
if (smb_close(ino))
PARANOIA("could not close inode %ld\n", ino->i_ino);
unlock_kernel();
- clear_inode(ino);
}
static struct option opts[] = {
--
GitLab
From deee3ce466a3e2cfb54c93b8fd22bbccd19ea7d6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 5 Jun 2010 19:28:32 -0400
Subject: [PATCH 583/863] covert fatfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/fat/inode.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index ec6a699a4023d..830058057d333 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -263,7 +263,7 @@ static const struct address_space_operations fat_aops = {
* check if the location is still valid and retry if it
* isn't. Otherwise we do changes.
* 5. Spinlock is used to protect hash/unhash/location check/lookup
- * 6. fat_clear_inode() unhashes the F-d-c entry.
+ * 6. fat_evict_inode() unhashes the F-d-c entry.
* 7. lookup() and readdir() do igrab() if they find a F-d-c entry
* and consider negative result as cache miss.
*/
@@ -448,16 +448,15 @@ struct inode *fat_build_inode(struct super_block *sb,
EXPORT_SYMBOL_GPL(fat_build_inode);
-static void fat_delete_inode(struct inode *inode)
+static void fat_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
- inode->i_size = 0;
- fat_truncate_blocks(inode, 0);
- clear_inode(inode);
-}
-
-static void fat_clear_inode(struct inode *inode)
-{
+ if (!inode->i_nlink) {
+ inode->i_size = 0;
+ fat_truncate_blocks(inode, 0);
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
fat_cache_inval_inode(inode);
fat_detach(inode);
}
@@ -674,12 +673,11 @@ static const struct super_operations fat_sops = {
.alloc_inode = fat_alloc_inode,
.destroy_inode = fat_destroy_inode,
.write_inode = fat_write_inode,
- .delete_inode = fat_delete_inode,
+ .evict_inode = fat_evict_inode,
.put_super = fat_put_super,
.write_super = fat_write_super,
.sync_fs = fat_sync_fs,
.statfs = fat_statfs,
- .clear_inode = fat_clear_inode,
.remount_fs = fat_remount,
.show_options = fat_show_options,
--
GitLab
From 58e8268c7bae538ccb8b7eccc817c1c28bcd4da2 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 5 Jun 2010 19:40:56 -0400
Subject: [PATCH 584/863] switch ufs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ufs/ialloc.c | 2 --
fs/ufs/inode.c | 43 ++++++++++++++++++++++++++-----------------
fs/ufs/super.c | 2 +-
fs/ufs/ufs.h | 2 +-
4 files changed, 28 insertions(+), 21 deletions(-)
diff --git a/fs/ufs/ialloc.c b/fs/ufs/ialloc.c
index 594480e537d2b..428017e018fe6 100644
--- a/fs/ufs/ialloc.c
+++ b/fs/ufs/ialloc.c
@@ -94,8 +94,6 @@ void ufs_free_inode (struct inode * inode)
is_directory = S_ISDIR(inode->i_mode);
- clear_inode (inode);
-
if (ubh_isclr (UCPI_UBH(ucpi), ucpi->c_iusedoff, bit))
ufs_error(sb, "ufs_free_inode", "bit already cleared for inode %u", ino);
else {
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 45cafa937a4b2..2b251f2093afc 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -911,24 +911,33 @@ int ufs_sync_inode (struct inode *inode)
return ufs_update_inode (inode, 1);
}
-void ufs_delete_inode (struct inode * inode)
+void ufs_evict_inode(struct inode * inode)
{
- loff_t old_i_size;
+ int want_delete = 0;
+
+ if (!inode->i_nlink && !is_bad_inode(inode))
+ want_delete = 1;
truncate_inode_pages(&inode->i_data, 0);
- if (is_bad_inode(inode))
- goto no_delete;
- /*UFS_I(inode)->i_dtime = CURRENT_TIME;*/
- lock_kernel();
- mark_inode_dirty(inode);
- ufs_update_inode(inode, IS_SYNC(inode));
- old_i_size = inode->i_size;
- inode->i_size = 0;
- if (inode->i_blocks && ufs_truncate(inode, old_i_size))
- ufs_warning(inode->i_sb, __func__, "ufs_truncate failed\n");
- ufs_free_inode (inode);
- unlock_kernel();
- return;
-no_delete:
- clear_inode(inode); /* We must guarantee clearing of inode... */
+ if (want_delete) {
+ loff_t old_i_size;
+ /*UFS_I(inode)->i_dtime = CURRENT_TIME;*/
+ lock_kernel();
+ mark_inode_dirty(inode);
+ ufs_update_inode(inode, IS_SYNC(inode));
+ old_i_size = inode->i_size;
+ inode->i_size = 0;
+ if (inode->i_blocks && ufs_truncate(inode, old_i_size))
+ ufs_warning(inode->i_sb, __func__, "ufs_truncate failed\n");
+ unlock_kernel();
+ }
+
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
+
+ if (want_delete) {
+ lock_kernel();
+ ufs_free_inode (inode);
+ unlock_kernel();
+ }
}
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 3ec5a9eb6efb3..d510c1b91817c 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1440,7 +1440,7 @@ static const struct super_operations ufs_super_ops = {
.alloc_inode = ufs_alloc_inode,
.destroy_inode = ufs_destroy_inode,
.write_inode = ufs_write_inode,
- .delete_inode = ufs_delete_inode,
+ .evict_inode = ufs_evict_inode,
.put_super = ufs_put_super,
.write_super = ufs_write_super,
.sync_fs = ufs_sync_fs,
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index 179ae6b3180a1..c08782e1b48a0 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -108,7 +108,7 @@ extern struct inode * ufs_new_inode (struct inode *, int);
extern struct inode *ufs_iget(struct super_block *, unsigned long);
extern int ufs_write_inode (struct inode *, struct writeback_control *);
extern int ufs_sync_inode (struct inode *);
-extern void ufs_delete_inode (struct inode *);
+extern void ufs_evict_inode (struct inode *);
extern struct buffer_head * ufs_bread (struct inode *, unsigned, int, int *);
extern int ufs_getfrag_block (struct inode *inode, sector_t fragment, struct buffer_head *bh_result, int create);
--
GitLab
From 0f3f63a4700d7c5aed51491b0113a257cf290a56 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 5 Jun 2010 21:20:32 -0400
Subject: [PATCH 585/863] spufs conversion to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
arch/powerpc/platforms/cell/spufs/inode.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 32625f366fb5b..5dec408d67035 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -143,15 +143,14 @@ spufs_new_file(struct super_block *sb, struct dentry *dentry,
}
static void
-spufs_delete_inode(struct inode *inode)
+spufs_evict_inode(struct inode *inode)
{
struct spufs_inode_info *ei = SPUFS_I(inode);
-
+ end_writeback(inode);
if (ei->i_ctx)
put_spu_context(ei->i_ctx);
if (ei->i_gang)
put_spu_gang(ei->i_gang);
- clear_inode(inode);
}
static void spufs_prune_dir(struct dentry *dir)
@@ -779,8 +778,7 @@ spufs_fill_super(struct super_block *sb, void *data, int silent)
.alloc_inode = spufs_alloc_inode,
.destroy_inode = spufs_destroy_inode,
.statfs = simple_statfs,
- .delete_inode = spufs_delete_inode,
- .drop_inode = generic_delete_inode,
+ .evict_inode = spufs_evict_inode,
.show_options = generic_show_options,
};
--
GitLab
From ac14a95b5239d37b6082c3791b88d7ab4e8e444c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 07:08:19 -0400
Subject: [PATCH 586/863] convert ext3 to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ext3/ialloc.c | 12 ------------
fs/ext3/inode.c | 37 +++++++++++++++++++++++++++----------
fs/ext3/super.c | 14 +-------------
include/linux/ext3_fs.h | 2 +-
4 files changed, 29 insertions(+), 36 deletions(-)
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index 498021eb88fb4..4ab72db3559e7 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -119,20 +119,8 @@ void ext3_free_inode (handle_t *handle, struct inode * inode)
ino = inode->i_ino;
ext3_debug ("freeing inode %lu\n", ino);
- /*
- * Note: we must free any quota before locking the superblock,
- * as writing the quota to disk may need the lock as well.
- */
- dquot_initialize(inode);
- ext3_xattr_delete_inode(handle, inode);
- dquot_free_inode(inode);
- dquot_drop(inode);
-
is_directory = S_ISDIR(inode->i_mode);
- /* Do this BEFORE marking the inode not in use or returning an error */
- clear_inode (inode);
-
es = EXT3_SB(sb)->s_es;
if (ino < EXT3_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) {
ext3_error (sb, "ext3_free_inode",
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index b04d119366838..cc55cecf9fbc9 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -190,18 +190,28 @@ static int truncate_restart_transaction(handle_t *handle, struct inode *inode)
}
/*
- * Called at the last iput() if i_nlink is zero.
+ * Called at inode eviction from icache
*/
-void ext3_delete_inode (struct inode * inode)
+void ext3_evict_inode (struct inode *inode)
{
+ struct ext3_block_alloc_info *rsv;
handle_t *handle;
+ int want_delete = 0;
- if (!is_bad_inode(inode))
+ if (!inode->i_nlink && !is_bad_inode(inode)) {
dquot_initialize(inode);
+ want_delete = 1;
+ }
truncate_inode_pages(&inode->i_data, 0);
- if (is_bad_inode(inode))
+ ext3_discard_reservation(inode);
+ rsv = EXT3_I(inode)->i_block_alloc_info;
+ EXT3_I(inode)->i_block_alloc_info = NULL;
+ if (unlikely(rsv))
+ kfree(rsv);
+
+ if (!want_delete)
goto no_delete;
handle = start_transaction(inode);
@@ -238,15 +248,22 @@ void ext3_delete_inode (struct inode * inode)
* having errors), but we can't free the inode if the mark_dirty
* fails.
*/
- if (ext3_mark_inode_dirty(handle, inode))
- /* If that failed, just do the required in-core inode clear. */
- clear_inode(inode);
- else
+ if (ext3_mark_inode_dirty(handle, inode)) {
+ /* If that failed, just dquot_drop() and be done with that */
+ dquot_drop(inode);
+ end_writeback(inode);
+ } else {
+ ext3_xattr_delete_inode(handle, inode);
+ dquot_free_inode(inode);
+ dquot_drop(inode);
+ end_writeback(inode);
ext3_free_inode(handle, inode);
+ }
ext3_journal_stop(handle);
return;
no_delete:
- clear_inode(inode); /* We must guarantee clearing of inode... */
+ end_writeback(inode);
+ dquot_drop(inode);
}
typedef struct {
@@ -2564,7 +2581,7 @@ void ext3_truncate(struct inode *inode)
* If this was a simple ftruncate(), and the file will remain alive
* then we need to clear up the orphan record which we created above.
* However, if this was a real unlink then we were called by
- * ext3_delete_inode(), and we allow that function to clean up the
+ * ext3_evict_inode(), and we allow that function to clean up the
* orphan info for us.
*/
if (inode->i_nlink)
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 6c953bb255e76..a951fd5c081c9 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -527,17 +527,6 @@ static void destroy_inodecache(void)
kmem_cache_destroy(ext3_inode_cachep);
}
-static void ext3_clear_inode(struct inode *inode)
-{
- struct ext3_block_alloc_info *rsv = EXT3_I(inode)->i_block_alloc_info;
-
- dquot_drop(inode);
- ext3_discard_reservation(inode);
- EXT3_I(inode)->i_block_alloc_info = NULL;
- if (unlikely(rsv))
- kfree(rsv);
-}
-
static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb)
{
#if defined(CONFIG_QUOTA)
@@ -783,14 +772,13 @@ static const struct super_operations ext3_sops = {
.destroy_inode = ext3_destroy_inode,
.write_inode = ext3_write_inode,
.dirty_inode = ext3_dirty_inode,
- .delete_inode = ext3_delete_inode,
+ .evict_inode = ext3_evict_inode,
.put_super = ext3_put_super,
.sync_fs = ext3_sync_fs,
.freeze_fs = ext3_freeze,
.unfreeze_fs = ext3_unfreeze,
.statfs = ext3_statfs,
.remount_fs = ext3_remount,
- .clear_inode = ext3_clear_inode,
.show_options = ext3_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext3_quota_read,
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 7fc62d4550b20..e7cb217669923 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -896,7 +896,7 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
extern struct inode *ext3_iget(struct super_block *, unsigned long);
extern int ext3_write_inode (struct inode *, struct writeback_control *);
extern int ext3_setattr (struct dentry *, struct iattr *);
-extern void ext3_delete_inode (struct inode *);
+extern void ext3_evict_inode (struct inode *);
extern int ext3_sync_inode (handle_t *, struct inode *);
extern void ext3_discard_reservation (struct inode *);
extern void ext3_dirty_inode(struct inode *);
--
GitLab
From 9df2f85128def59185f8a1c584f8af41df17405a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 09:50:39 -0400
Subject: [PATCH 587/863] switch bfs to ->evict_inode(), clean up
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/bfs/inode.c | 70 +++++++++++++++++++++++---------------------------
1 file changed, 32 insertions(+), 38 deletions(-)
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index f22a7d3dc362d..0499822b15682 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -99,6 +99,24 @@ struct inode *bfs_iget(struct super_block *sb, unsigned long ino)
return ERR_PTR(-EIO);
}
+static struct bfs_inode *find_inode(struct super_block *sb, u16 ino, struct buffer_head **p)
+{
+ if ((ino < BFS_ROOT_INO) || (ino > BFS_SB(sb)->si_lasti)) {
+ printf("Bad inode number %s:%08x\n", sb->s_id, ino);
+ return ERR_PTR(-EIO);
+ }
+
+ ino -= BFS_ROOT_INO;
+
+ *p = sb_bread(sb, 1 + ino / BFS_INODES_PER_BLOCK);
+ if (!*p) {
+ printf("Unable to read inode %s:%08x\n", sb->s_id, ino);
+ return ERR_PTR(-EIO);
+ }
+
+ return (struct bfs_inode *)(*p)->b_data + ino % BFS_INODES_PER_BLOCK;
+}
+
static int bfs_write_inode(struct inode *inode, struct writeback_control *wbc)
{
struct bfs_sb_info *info = BFS_SB(inode->i_sb);
@@ -106,28 +124,15 @@ static int bfs_write_inode(struct inode *inode, struct writeback_control *wbc)
unsigned long i_sblock;
struct bfs_inode *di;
struct buffer_head *bh;
- int block, off;
int err = 0;
dprintf("ino=%08x\n", ino);
- if ((ino < BFS_ROOT_INO) || (ino > BFS_SB(inode->i_sb)->si_lasti)) {
- printf("Bad inode number %s:%08x\n", inode->i_sb->s_id, ino);
- return -EIO;
- }
+ di = find_inode(inode->i_sb, ino, &bh);
+ if (IS_ERR(di))
+ return PTR_ERR(di);
mutex_lock(&info->bfs_lock);
- block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
- bh = sb_bread(inode->i_sb, block);
- if (!bh) {
- printf("Unable to read inode %s:%08x\n",
- inode->i_sb->s_id, ino);
- mutex_unlock(&info->bfs_lock);
- return -EIO;
- }
-
- off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
- di = (struct bfs_inode *)bh->b_data + off;
if (ino == BFS_ROOT_INO)
di->i_vtype = cpu_to_le32(BFS_VDIR);
@@ -158,12 +163,11 @@ static int bfs_write_inode(struct inode *inode, struct writeback_control *wbc)
return err;
}
-static void bfs_delete_inode(struct inode *inode)
+static void bfs_evict_inode(struct inode *inode)
{
unsigned long ino = inode->i_ino;
struct bfs_inode *di;
struct buffer_head *bh;
- int block, off;
struct super_block *s = inode->i_sb;
struct bfs_sb_info *info = BFS_SB(s);
struct bfs_inode_info *bi = BFS_I(inode);
@@ -171,28 +175,19 @@ static void bfs_delete_inode(struct inode *inode)
dprintf("ino=%08lx\n", ino);
truncate_inode_pages(&inode->i_data, 0);
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
- if ((ino < BFS_ROOT_INO) || (ino > info->si_lasti)) {
- printf("invalid ino=%08lx\n", ino);
+ if (inode->i_nlink)
return;
- }
-
- inode->i_size = 0;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
- mutex_lock(&info->bfs_lock);
- mark_inode_dirty(inode);
- block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
- bh = sb_bread(s, block);
- if (!bh) {
- printf("Unable to read inode %s:%08lx\n",
- inode->i_sb->s_id, ino);
- mutex_unlock(&info->bfs_lock);
+ di = find_inode(s, inode->i_ino, &bh);
+ if (IS_ERR(di))
return;
- }
- off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
- di = (struct bfs_inode *)bh->b_data + off;
- memset((void *)di, 0, sizeof(struct bfs_inode));
+
+ mutex_lock(&info->bfs_lock);
+ /* clear on-disk inode */
+ memset(di, 0, sizeof(struct bfs_inode));
mark_buffer_dirty(bh);
brelse(bh);
@@ -214,7 +209,6 @@ static void bfs_delete_inode(struct inode *inode)
mark_buffer_dirty(info->si_sbh);
}
mutex_unlock(&info->bfs_lock);
- clear_inode(inode);
}
static int bfs_sync_fs(struct super_block *sb, int wait)
@@ -319,7 +313,7 @@ static const struct super_operations bfs_sops = {
.alloc_inode = bfs_alloc_inode,
.destroy_inode = bfs_destroy_inode,
.write_inode = bfs_write_inode,
- .delete_inode = bfs_delete_inode,
+ .evict_inode = bfs_evict_inode,
.put_super = bfs_put_super,
.write_super = bfs_write_super,
.sync_fs = bfs_sync_fs,
--
GitLab
From 69c9e750176b409559b2361fbb28fa7bbf3c5461 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 10:12:01 -0400
Subject: [PATCH 588/863] switch omfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/omfs/inode.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
index 089839a6cc640..56121debc22b8 100644
--- a/fs/omfs/inode.c
+++ b/fs/omfs/inode.c
@@ -175,9 +175,13 @@ int omfs_sync_inode(struct inode *inode)
* called when an entry is deleted, need to clear the bits in the
* bitmaps.
*/
-static void omfs_delete_inode(struct inode *inode)
+static void omfs_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
+
+ if (inode->i_nlink)
+ return;
if (S_ISREG(inode->i_mode)) {
inode->i_size = 0;
@@ -185,7 +189,6 @@ static void omfs_delete_inode(struct inode *inode)
}
omfs_clear_range(inode->i_sb, inode->i_ino, 2);
- clear_inode(inode);
}
struct inode *omfs_iget(struct super_block *sb, ino_t ino)
@@ -284,7 +287,7 @@ static int omfs_statfs(struct dentry *dentry, struct kstatfs *buf)
static const struct super_operations omfs_sops = {
.write_inode = omfs_write_inode,
- .delete_inode = omfs_delete_inode,
+ .evict_inode = omfs_evict_inode,
.put_super = omfs_put_super,
.statfs = omfs_statfs,
.show_options = generic_show_options,
--
GitLab
From f053ddde7575090e09e2f5c4233d8a19f0925b93 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 10:16:41 -0400
Subject: [PATCH 589/863] switch affs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/affs/affs.h | 3 +--
fs/affs/inode.c | 25 ++++++++++++-------------
fs/affs/super.c | 3 +--
3 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index f05b6155ccc8f..a8cbdeb34025c 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -171,8 +171,7 @@ extern int affs_rename(struct inode *old_dir, struct dentry *old_dentry,
extern unsigned long affs_parent_ino(struct inode *dir);
extern struct inode *affs_new_inode(struct inode *dir);
extern int affs_notify_change(struct dentry *dentry, struct iattr *attr);
-extern void affs_delete_inode(struct inode *inode);
-extern void affs_clear_inode(struct inode *inode);
+extern void affs_evict_inode(struct inode *inode);
extern struct inode *affs_iget(struct super_block *sb,
unsigned long ino);
extern int affs_write_inode(struct inode *inode,
diff --git a/fs/affs/inode.c b/fs/affs/inode.c
index 6883d5fb84cfc..3a0fdec175ba6 100644
--- a/fs/affs/inode.c
+++ b/fs/affs/inode.c
@@ -252,23 +252,19 @@ affs_notify_change(struct dentry *dentry, struct iattr *attr)
}
void
-affs_delete_inode(struct inode *inode)
-{
- pr_debug("AFFS: delete_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
- truncate_inode_pages(&inode->i_data, 0);
- inode->i_size = 0;
- affs_truncate(inode);
- clear_inode(inode);
- affs_free_block(inode->i_sb, inode->i_ino);
-}
-
-void
-affs_clear_inode(struct inode *inode)
+affs_evict_inode(struct inode *inode)
{
unsigned long cache_page;
+ pr_debug("AFFS: evict_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
+ truncate_inode_pages(&inode->i_data, 0);
- pr_debug("AFFS: clear_inode(ino=%lu, nlink=%u)\n", inode->i_ino, inode->i_nlink);
+ if (!inode->i_nlink) {
+ inode->i_size = 0;
+ affs_truncate(inode);
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
affs_free_prealloc(inode);
cache_page = (unsigned long)AFFS_I(inode)->i_lc;
if (cache_page) {
@@ -280,6 +276,9 @@ affs_clear_inode(struct inode *inode)
affs_brelse(AFFS_I(inode)->i_ext_bh);
AFFS_I(inode)->i_ext_last = ~1;
AFFS_I(inode)->i_ext_bh = NULL;
+
+ if (!inode->i_nlink)
+ affs_free_block(inode->i_sb, inode->i_ino);
}
struct inode *
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 16a3e4765f687..2c804a87c142e 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -140,8 +140,7 @@ static const struct super_operations affs_sops = {
.alloc_inode = affs_alloc_inode,
.destroy_inode = affs_destroy_inode,
.write_inode = affs_write_inode,
- .delete_inode = affs_delete_inode,
- .clear_inode = affs_clear_inode,
+ .evict_inode = affs_evict_inode,
.put_super = affs_put_super,
.write_super = affs_write_super,
.sync_fs = affs_sync_fs,
--
GitLab
From e971a6d7b9daebfe2c11c590377d3933410ab929 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 15:16:17 -0400
Subject: [PATCH 590/863] stop icache pollution in hostfs, switch to
->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs_kern.c | 30 ++++++++----------------------
1 file changed, 8 insertions(+), 22 deletions(-)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 7943ff11d4899..fab5f5a1e6f03 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -241,16 +241,13 @@ static struct inode *hostfs_iget(struct super_block *sb)
struct inode *inode;
long ret;
- inode = iget_locked(sb, 0);
+ inode = new_inode(sb);
if (!inode)
return ERR_PTR(-ENOMEM);
- if (inode->i_state & I_NEW) {
- ret = hostfs_read_inode(inode);
- if (ret < 0) {
- iget_failed(inode);
- return ERR_PTR(ret);
- }
- unlock_new_inode(inode);
+ ret = hostfs_read_inode(inode);
+ if (ret < 0) {
+ iput(inode);
+ return ERR_PTR(ret);
}
return inode;
}
@@ -299,29 +296,19 @@ static struct inode *hostfs_alloc_inode(struct super_block *sb)
return &hi->vfs_inode;
}
-static void hostfs_delete_inode(struct inode *inode)
+static void hostfs_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (HOSTFS_I(inode)->fd != -1) {
close_file(&HOSTFS_I(inode)->fd);
HOSTFS_I(inode)->fd = -1;
}
- clear_inode(inode);
}
static void hostfs_destroy_inode(struct inode *inode)
{
kfree(HOSTFS_I(inode)->host_filename);
-
- /*
- * XXX: This should not happen, probably. The check is here for
- * additional safety.
- */
- if (HOSTFS_I(inode)->fd != -1) {
- close_file(&HOSTFS_I(inode)->fd);
- printk(KERN_DEBUG "Closing host fd in .destroy_inode\n");
- }
-
kfree(HOSTFS_I(inode));
}
@@ -339,9 +326,8 @@ static int hostfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
static const struct super_operations hostfs_sbops = {
.alloc_inode = hostfs_alloc_inode,
- .drop_inode = generic_delete_inode,
- .delete_inode = hostfs_delete_inode,
.destroy_inode = hostfs_destroy_inode,
+ .evict_inode = hostfs_evict_inode,
.statfs = hostfs_statfs,
.show_options = hostfs_show_options,
};
--
GitLab
From 601d2c38b93130d387091c28d13abea40924e518 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 17:53:01 -0400
Subject: [PATCH 591/863] hostfs: don't keep a field in each inode when we are
using it only in root
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs_kern.c | 39 +++++++++++++++------------------------
1 file changed, 15 insertions(+), 24 deletions(-)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index fab5f5a1e6f03..7e6750499b8b1 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -19,7 +19,6 @@
#include "kern.h"
struct hostfs_inode_info {
- char *host_filename;
int fd;
fmode_t mode;
struct inode vfs_inode;
@@ -103,7 +102,7 @@ static char *dentry_name(struct dentry *dentry, int extra)
parent = parent->d_parent;
}
- root = HOSTFS_I(parent->d_inode)->host_filename;
+ root = parent->d_sb->s_fs_info;
len += strlen(root);
name = kmalloc(len + extra + 1, GFP_KERNEL);
if (name == NULL)
@@ -266,7 +265,7 @@ int hostfs_statfs(struct dentry *dentry, struct kstatfs *sf)
long long f_files;
long long f_ffree;
- err = do_statfs(HOSTFS_I(dentry->d_sb->s_root->d_inode)->host_filename,
+ err = do_statfs(dentry->d_sb->s_fs_info,
&sf->f_bsize, &f_blocks, &f_bfree, &f_bavail, &f_files,
&f_ffree, &sf->f_fsid, sizeof(sf->f_fsid),
&sf->f_namelen, sf->f_spare);
@@ -285,13 +284,10 @@ static struct inode *hostfs_alloc_inode(struct super_block *sb)
{
struct hostfs_inode_info *hi;
- hi = kmalloc(sizeof(*hi), GFP_KERNEL);
+ hi = kzalloc(sizeof(*hi), GFP_KERNEL);
if (hi == NULL)
return NULL;
-
- *hi = ((struct hostfs_inode_info) { .host_filename = NULL,
- .fd = -1,
- .mode = 0 });
+ hi->fd = -1;
inode_init_once(&hi->vfs_inode);
return &hi->vfs_inode;
}
@@ -308,14 +304,12 @@ static void hostfs_evict_inode(struct inode *inode)
static void hostfs_destroy_inode(struct inode *inode)
{
- kfree(HOSTFS_I(inode)->host_filename);
kfree(HOSTFS_I(inode));
}
static int hostfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
- struct inode *root = vfs->mnt_sb->s_root->d_inode;
- const char *root_path = HOSTFS_I(root)->host_filename;
+ const char *root_path = vfs->mnt_sb->s_fs_info;
size_t offset = strlen(root_ino) + 1;
if (strlen(root_path) > offset)
@@ -978,8 +972,8 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
req_root = "";
err = -ENOMEM;
- host_root_path = kmalloc(strlen(root_ino) + 1
- + strlen(req_root) + 1, GFP_KERNEL);
+ sb->s_fs_info = host_root_path =
+ kmalloc(strlen(root_ino) + strlen(req_root) + 2, GFP_KERNEL);
if (host_root_path == NULL)
goto out;
@@ -988,20 +982,13 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
root_inode = hostfs_iget(sb);
if (IS_ERR(root_inode)) {
err = PTR_ERR(root_inode);
- goto out_free;
+ goto out;
}
err = init_inode(root_inode, NULL);
if (err)
goto out_put;
- HOSTFS_I(root_inode)->host_filename = host_root_path;
- /*
- * Avoid that in the error path, iput(root_inode) frees again
- * host_root_path through hostfs_destroy_inode!
- */
- host_root_path = NULL;
-
err = -ENOMEM;
sb->s_root = d_alloc_root(root_inode);
if (sb->s_root == NULL)
@@ -1019,8 +1006,6 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
out_put:
iput(root_inode);
-out_free:
- kfree(host_root_path);
out:
return err;
}
@@ -1032,11 +1017,17 @@ static int hostfs_read_sb(struct file_system_type *type,
return get_sb_nodev(type, flags, data, hostfs_fill_sb_common, mnt);
}
+static void hostfs_kill_sb(struct super_block *s)
+{
+ kill_anon_super(s);
+ kfree(s->s_fs_info);
+}
+
static struct file_system_type hostfs_type = {
.owner = THIS_MODULE,
.name = "hostfs",
.get_sb = hostfs_read_sb,
- .kill_sb = kill_anon_super,
+ .kill_sb = hostfs_kill_sb,
.fs_flags = 0,
};
--
GitLab
From 52b209f7b848a28987ed133dc2b48f304b1dc6b8 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 18:43:19 -0400
Subject: [PATCH 592/863] get rid of hostfs_read_inode()
There are only two call sites; in one (hostfs_iget()) it's actually
a no-op and in another (fill_super()) it's easier to expand the
damn thing and use what we know about its arguments to simplify
it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs_kern.c | 69 ++++++++++-------------------------------
1 file changed, 16 insertions(+), 53 deletions(-)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 7e6750499b8b1..25d79298a98e8 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -204,50 +204,11 @@ static char *follow_link(char *link)
return ERR_PTR(n);
}
-static int hostfs_read_inode(struct inode *ino)
-{
- char *name;
- int err = 0;
-
- /*
- * Unfortunately, we are called from iget() when we don't have a dentry
- * allocated yet.
- */
- if (list_empty(&ino->i_dentry))
- goto out;
-
- err = -ENOMEM;
- name = inode_name(ino, 0);
- if (name == NULL)
- goto out;
-
- if (file_type(name, NULL, NULL) == OS_TYPE_SYMLINK) {
- name = follow_link(name);
- if (IS_ERR(name)) {
- err = PTR_ERR(name);
- goto out;
- }
- }
-
- err = read_name(ino, name);
- kfree(name);
- out:
- return err;
-}
-
static struct inode *hostfs_iget(struct super_block *sb)
{
- struct inode *inode;
- long ret;
-
- inode = new_inode(sb);
+ struct inode *inode = new_inode(sb);
if (!inode)
return ERR_PTR(-ENOMEM);
- ret = hostfs_read_inode(inode);
- if (ret < 0) {
- iput(inode);
- return ERR_PTR(ret);
- }
return inode;
}
@@ -979,13 +940,23 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
sprintf(host_root_path, "%s/%s", root_ino, req_root);
- root_inode = hostfs_iget(sb);
- if (IS_ERR(root_inode)) {
- err = PTR_ERR(root_inode);
+ root_inode = new_inode(sb);
+ if (!root_inode)
goto out;
- }
- err = init_inode(root_inode, NULL);
+ root_inode->i_op = &hostfs_dir_iops;
+ root_inode->i_fop = &hostfs_dir_fops;
+
+ if (file_type(host_root_path, NULL, NULL) == OS_TYPE_SYMLINK) {
+ char *name = follow_link(host_root_path);
+ if (IS_ERR(name))
+ err = PTR_ERR(name);
+ else
+ err = read_name(root_inode, name);
+ kfree(name);
+ } else {
+ err = read_name(root_inode, host_root_path);
+ }
if (err)
goto out_put;
@@ -994,14 +965,6 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
if (sb->s_root == NULL)
goto out_put;
- err = hostfs_read_inode(root_inode);
- if (err) {
- /* No iput in this case because the dput does that for us */
- dput(sb->s_root);
- sb->s_root = NULL;
- goto out;
- }
-
return 0;
out_put:
--
GitLab
From 5e2df28cc62fdc3f4900de23f4ec69e6312f78a4 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 19:38:18 -0400
Subject: [PATCH 593/863] hostfs: pass pathname to init_inode()
We will calculate it in all callers anyway, so there's no
need to duplicate that inside. Moreover, that way we lose
all failure exits in init_inode(), so it doesn't need to
return anything.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs_kern.c | 45 ++++++++++++++---------------------------
1 file changed, 15 insertions(+), 30 deletions(-)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 25d79298a98e8..5a77ed3dfd7ec 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -485,25 +485,16 @@ static const struct address_space_operations hostfs_aops = {
.write_end = hostfs_write_end,
};
-static int init_inode(struct inode *inode, struct dentry *dentry)
+static void init_inode(struct inode *inode, char *path)
{
- char *name;
- int type, err = -ENOMEM;
+ int type;
int maj, min;
dev_t rdev = 0;
- if (dentry) {
- name = dentry_name(dentry, 0);
- if (name == NULL)
- goto out;
- type = file_type(name, &maj, &min);
- /* Reencode maj and min with the kernel encoding.*/
- rdev = MKDEV(maj, min);
- kfree(name);
- }
- else type = OS_TYPE_DIR;
+ type = file_type(path, &maj, &min);
+ /* Reencode maj and min with the kernel encoding.*/
+ rdev = MKDEV(maj, min);
- err = 0;
if (type == OS_TYPE_SYMLINK)
inode->i_op = &page_symlink_inode_operations;
else if (type == OS_TYPE_DIR)
@@ -531,8 +522,6 @@ static int init_inode(struct inode *inode, struct dentry *dentry)
init_special_inode(inode, S_IFSOCK, 0);
break;
}
- out:
- return err;
}
int hostfs_create(struct inode *dir, struct dentry *dentry, int mode,
@@ -548,10 +537,6 @@ int hostfs_create(struct inode *dir, struct dentry *dentry, int mode,
goto out;
}
- error = init_inode(inode, dentry);
- if (error)
- goto out_put;
-
error = -ENOMEM;
name = dentry_name(dentry, 0);
if (name == NULL)
@@ -561,9 +546,12 @@ int hostfs_create(struct inode *dir, struct dentry *dentry, int mode,
mode & S_IRUSR, mode & S_IWUSR, mode & S_IXUSR,
mode & S_IRGRP, mode & S_IWGRP, mode & S_IXGRP,
mode & S_IROTH, mode & S_IWOTH, mode & S_IXOTH);
- if (fd < 0)
+ if (fd < 0) {
error = fd;
- else error = read_name(inode, name);
+ } else {
+ error = read_name(inode, name);
+ init_inode(inode, name);
+ }
kfree(name);
if (error)
@@ -593,16 +581,14 @@ struct dentry *hostfs_lookup(struct inode *ino, struct dentry *dentry,
goto out;
}
- err = init_inode(inode, dentry);
- if (err)
- goto out_put;
-
err = -ENOMEM;
name = dentry_name(dentry, 0);
if (name == NULL)
goto out_put;
err = read_name(inode, name);
+ init_inode(inode, name);
+
kfree(name);
if (err == -ENOENT) {
iput(inode);
@@ -717,10 +703,6 @@ int hostfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
goto out;
}
- err = init_inode(inode, dentry);
- if (err)
- goto out_put;
-
err = -ENOMEM;
name = dentry_name(dentry, 0);
if (name == NULL)
@@ -732,6 +714,9 @@ int hostfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
goto out_free;
err = read_name(inode, name);
+ init_inode(inode, name);
+ if (err)
+ goto out_put;
kfree(name);
if (err)
goto out_put;
--
GitLab
From 39b743c6199a317ffac67fcae1dd05be3142633a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 20:08:56 -0400
Subject: [PATCH 594/863] switch stat_file() to passing a single struct rather
than fsckloads of pointers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs.h | 20 ++++++++---
fs/hostfs/hostfs_kern.c | 31 +++++++----------
fs/hostfs/hostfs_user.c | 75 +++++++++++++++++------------------------
3 files changed, 58 insertions(+), 68 deletions(-)
diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
index 2f34f8f2134b3..3a52edef9948a 100644
--- a/fs/hostfs/hostfs.h
+++ b/fs/hostfs/hostfs.h
@@ -53,11 +53,21 @@ struct hostfs_iattr {
struct timespec ia_ctime;
};
-extern int stat_file(const char *path, unsigned long long *inode_out,
- int *mode_out, int *nlink_out, int *uid_out, int *gid_out,
- unsigned long long *size_out, struct timespec *atime_out,
- struct timespec *mtime_out, struct timespec *ctime_out,
- int *blksize_out, unsigned long long *blocks_out, int fd);
+struct hostfs_stat {
+ unsigned long long ino;
+ unsigned int mode;
+ unsigned int nlink;
+ unsigned int uid;
+ unsigned int gid;
+ unsigned long long size;
+ struct timespec atime, mtime, ctime;
+ unsigned int blksize;
+ unsigned long long blocks;
+ unsigned int maj;
+ unsigned int min;
+};
+
+extern int stat_file(const char *path, struct hostfs_stat *p, int fd);
extern int access_file(char *path, int r, int w, int x);
extern int open_file(char *path, int r, int w, int append);
extern int file_type(const char *path, int *maj, int *min);
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 5a77ed3dfd7ec..420a826ae0f28 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -131,28 +131,21 @@ static char *inode_name(struct inode *ino, int extra)
static int read_name(struct inode *ino, char *name)
{
- /*
- * The non-int inode fields are copied into ints by stat_file and
- * then copied into the inode because passing the actual pointers
- * in and having them treated as int * breaks on big-endian machines
- */
- int err;
- int i_mode, i_nlink, i_blksize;
- unsigned long long i_size;
- unsigned long long i_ino;
- unsigned long long i_blocks;
-
- err = stat_file(name, &i_ino, &i_mode, &i_nlink, &ino->i_uid,
- &ino->i_gid, &i_size, &ino->i_atime, &ino->i_mtime,
- &ino->i_ctime, &i_blksize, &i_blocks, -1);
+ struct hostfs_stat st;
+ int err = stat_file(name, &st, -1);
if (err)
return err;
- ino->i_ino = i_ino;
- ino->i_mode = i_mode;
- ino->i_nlink = i_nlink;
- ino->i_size = i_size;
- ino->i_blocks = i_blocks;
+ ino->i_ino = st.ino;
+ ino->i_mode = st.mode;
+ ino->i_nlink = st.nlink;
+ ino->i_uid = st.uid;
+ ino->i_gid = st.gid;
+ ino->i_atime = st.atime;
+ ino->i_mtime = st.mtime;
+ ino->i_ctime = st.ctime;
+ ino->i_size = st.size;
+ ino->i_blocks = st.blocks;
return 0;
}
diff --git a/fs/hostfs/hostfs_user.c b/fs/hostfs/hostfs_user.c
index 4b8c666ba28f5..701d454a6791c 100644
--- a/fs/hostfs/hostfs_user.c
+++ b/fs/hostfs/hostfs_user.c
@@ -19,11 +19,27 @@
#include "user.h"
#include <utime.h>
-int stat_file(const char *path, unsigned long long *inode_out, int *mode_out,
- int *nlink_out, int *uid_out, int *gid_out,
- unsigned long long *size_out, struct timespec *atime_out,
- struct timespec *mtime_out, struct timespec *ctime_out,
- int *blksize_out, unsigned long long *blocks_out, int fd)
+static void stat64_to_hostfs(const struct stat64 *buf, struct hostfs_stat *p)
+{
+ p->ino = buf->st_ino;
+ p->mode = buf->st_mode;
+ p->nlink = buf->st_nlink;
+ p->uid = buf->st_uid;
+ p->gid = buf->st_gid;
+ p->size = buf->st_size;
+ p->atime.tv_sec = buf->st_atime;
+ p->atime.tv_nsec = 0;
+ p->ctime.tv_sec = buf->st_ctime;
+ p->ctime.tv_nsec = 0;
+ p->mtime.tv_sec = buf->st_mtime;
+ p->mtime.tv_nsec = 0;
+ p->blksize = buf->st_blksize;
+ p->blocks = buf->st_blocks;
+ p->maj = os_major(buf->st_rdev);
+ p->min = os_minor(buf->st_rdev);
+}
+
+int stat_file(const char *path, struct hostfs_stat *p, int fd)
{
struct stat64 buf;
@@ -33,35 +49,7 @@ int stat_file(const char *path, unsigned long long *inode_out, int *mode_out,
} else if (lstat64(path, &buf) < 0) {
return -errno;
}
-
- if (inode_out != NULL)
- *inode_out = buf.st_ino;
- if (mode_out != NULL)
- *mode_out = buf.st_mode;
- if (nlink_out != NULL)
- *nlink_out = buf.st_nlink;
- if (uid_out != NULL)
- *uid_out = buf.st_uid;
- if (gid_out != NULL)
- *gid_out = buf.st_gid;
- if (size_out != NULL)
- *size_out = buf.st_size;
- if (atime_out != NULL) {
- atime_out->tv_sec = buf.st_atime;
- atime_out->tv_nsec = 0;
- }
- if (mtime_out != NULL) {
- mtime_out->tv_sec = buf.st_mtime;
- mtime_out->tv_nsec = 0;
- }
- if (ctime_out != NULL) {
- ctime_out->tv_sec = buf.st_ctime;
- ctime_out->tv_nsec = 0;
- }
- if (blksize_out != NULL)
- *blksize_out = buf.st_blksize;
- if (blocks_out != NULL)
- *blocks_out = buf.st_blocks;
+ stat64_to_hostfs(&buf, p);
return 0;
}
@@ -235,8 +223,8 @@ int file_create(char *name, int ur, int uw, int ux, int gr,
int set_attr(const char *file, struct hostfs_iattr *attrs, int fd)
{
+ struct hostfs_stat st;
struct timeval times[2];
- struct timespec atime_ts, mtime_ts;
int err, ma;
if (attrs->ia_valid & HOSTFS_ATTR_MODE) {
@@ -279,15 +267,14 @@ int set_attr(const char *file, struct hostfs_iattr *attrs, int fd)
*/
ma = (HOSTFS_ATTR_ATIME_SET | HOSTFS_ATTR_MTIME_SET);
if (attrs->ia_valid & ma) {
- err = stat_file(file, NULL, NULL, NULL, NULL, NULL, NULL,
- &atime_ts, &mtime_ts, NULL, NULL, NULL, fd);
+ err = stat_file(file, &st, fd);
if (err != 0)
return err;
- times[0].tv_sec = atime_ts.tv_sec;
- times[0].tv_usec = atime_ts.tv_nsec / 1000;
- times[1].tv_sec = mtime_ts.tv_sec;
- times[1].tv_usec = mtime_ts.tv_nsec / 1000;
+ times[0].tv_sec = st.atime.tv_sec;
+ times[0].tv_usec = st.atime.tv_nsec / 1000;
+ times[1].tv_sec = st.mtime.tv_sec;
+ times[1].tv_usec = st.mtime.tv_nsec / 1000;
if (attrs->ia_valid & HOSTFS_ATTR_ATIME_SET) {
times[0].tv_sec = attrs->ia_atime.tv_sec;
@@ -308,9 +295,9 @@ int set_attr(const char *file, struct hostfs_iattr *attrs, int fd)
/* Note: ctime is not handled */
if (attrs->ia_valid & (HOSTFS_ATTR_ATIME | HOSTFS_ATTR_MTIME)) {
- err = stat_file(file, NULL, NULL, NULL, NULL, NULL, NULL,
- &attrs->ia_atime, &attrs->ia_mtime, NULL,
- NULL, NULL, fd);
+ err = stat_file(file, &st, fd);
+ attrs->ia_atime = st.atime;
+ attrs->ia_mtime = st.mtime;
if (err != 0)
return err;
}
--
GitLab
From 4754b825571a6f2f7655245e420e8e486c4458f6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 20:33:12 -0400
Subject: [PATCH 595/863] hostfs: get rid of file_type(), fold init_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs.h | 1 -
fs/hostfs/hostfs_kern.c | 107 +++++++++++++++++-----------------------
fs/hostfs/hostfs_user.c | 30 -----------
3 files changed, 45 insertions(+), 93 deletions(-)
diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
index 3a52edef9948a..ea87e224ed971 100644
--- a/fs/hostfs/hostfs.h
+++ b/fs/hostfs/hostfs.h
@@ -70,7 +70,6 @@ struct hostfs_stat {
extern int stat_file(const char *path, struct hostfs_stat *p, int fd);
extern int access_file(char *path, int r, int w, int x);
extern int open_file(char *path, int r, int w, int append);
-extern int file_type(const char *path, int *maj, int *min);
extern void *open_dir(char *path, int *err_out);
extern char *read_dir(void *stream, unsigned long long *pos,
unsigned long long *ino_out, int *len_out);
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 420a826ae0f28..b29a2b878f466 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -129,26 +129,6 @@ static char *inode_name(struct inode *ino, int extra)
return dentry_name(dentry, extra);
}
-static int read_name(struct inode *ino, char *name)
-{
- struct hostfs_stat st;
- int err = stat_file(name, &st, -1);
- if (err)
- return err;
-
- ino->i_ino = st.ino;
- ino->i_mode = st.mode;
- ino->i_nlink = st.nlink;
- ino->i_uid = st.uid;
- ino->i_gid = st.gid;
- ino->i_atime = st.atime;
- ino->i_mtime = st.mtime;
- ino->i_ctime = st.ctime;
- ino->i_size = st.size;
- ino->i_blocks = st.blocks;
- return 0;
-}
-
static char *follow_link(char *link)
{
int len, n;
@@ -478,43 +458,51 @@ static const struct address_space_operations hostfs_aops = {
.write_end = hostfs_write_end,
};
-static void init_inode(struct inode *inode, char *path)
+static int read_name(struct inode *ino, char *name)
{
- int type;
- int maj, min;
- dev_t rdev = 0;
+ dev_t rdev;
+ struct hostfs_stat st;
+ int err = stat_file(name, &st, -1);
+ if (err)
+ return err;
- type = file_type(path, &maj, &min);
/* Reencode maj and min with the kernel encoding.*/
- rdev = MKDEV(maj, min);
+ rdev = MKDEV(st.maj, st.min);
- if (type == OS_TYPE_SYMLINK)
- inode->i_op = &page_symlink_inode_operations;
- else if (type == OS_TYPE_DIR)
- inode->i_op = &hostfs_dir_iops;
- else inode->i_op = &hostfs_iops;
-
- if (type == OS_TYPE_DIR) inode->i_fop = &hostfs_dir_fops;
- else inode->i_fop = &hostfs_file_fops;
-
- if (type == OS_TYPE_SYMLINK)
- inode->i_mapping->a_ops = &hostfs_link_aops;
- else inode->i_mapping->a_ops = &hostfs_aops;
-
- switch (type) {
- case OS_TYPE_CHARDEV:
- init_special_inode(inode, S_IFCHR, rdev);
- break;
- case OS_TYPE_BLOCKDEV:
- init_special_inode(inode, S_IFBLK, rdev);
+ switch (st.mode & S_IFMT) {
+ case S_IFLNK:
+ ino->i_op = &page_symlink_inode_operations;
+ ino->i_mapping->a_ops = &hostfs_link_aops;
break;
- case OS_TYPE_FIFO:
- init_special_inode(inode, S_IFIFO, 0);
+ case S_IFDIR:
+ ino->i_op = &hostfs_dir_iops;
+ ino->i_fop = &hostfs_dir_fops;
break;
- case OS_TYPE_SOCK:
- init_special_inode(inode, S_IFSOCK, 0);
+ case S_IFCHR:
+ case S_IFBLK:
+ case S_IFIFO:
+ case S_IFSOCK:
+ init_special_inode(ino, st.mode & S_IFMT, rdev);
+ ino->i_op = &hostfs_iops;
break;
+
+ default:
+ ino->i_op = &hostfs_iops;
+ ino->i_fop = &hostfs_file_fops;
+ ino->i_mapping->a_ops = &hostfs_aops;
}
+
+ ino->i_ino = st.ino;
+ ino->i_mode = st.mode;
+ ino->i_nlink = st.nlink;
+ ino->i_uid = st.uid;
+ ino->i_gid = st.gid;
+ ino->i_atime = st.atime;
+ ino->i_mtime = st.mtime;
+ ino->i_ctime = st.ctime;
+ ino->i_size = st.size;
+ ino->i_blocks = st.blocks;
+ return 0;
}
int hostfs_create(struct inode *dir, struct dentry *dentry, int mode,
@@ -539,12 +527,10 @@ int hostfs_create(struct inode *dir, struct dentry *dentry, int mode,
mode & S_IRUSR, mode & S_IWUSR, mode & S_IXUSR,
mode & S_IRGRP, mode & S_IWGRP, mode & S_IXGRP,
mode & S_IROTH, mode & S_IWOTH, mode & S_IXOTH);
- if (fd < 0) {
+ if (fd < 0)
error = fd;
- } else {
+ else
error = read_name(inode, name);
- init_inode(inode, name);
- }
kfree(name);
if (error)
@@ -580,7 +566,6 @@ struct dentry *hostfs_lookup(struct inode *ino, struct dentry *dentry,
goto out_put;
err = read_name(inode, name);
- init_inode(inode, name);
kfree(name);
if (err == -ENOENT) {
@@ -707,7 +692,6 @@ int hostfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
goto out_free;
err = read_name(inode, name);
- init_inode(inode, name);
if (err)
goto out_put;
kfree(name);
@@ -922,21 +906,20 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
if (!root_inode)
goto out;
- root_inode->i_op = &hostfs_dir_iops;
- root_inode->i_fop = &hostfs_dir_fops;
+ err = read_name(root_inode, host_root_path);
+ if (err)
+ goto out_put;
- if (file_type(host_root_path, NULL, NULL) == OS_TYPE_SYMLINK) {
+ if (S_ISLNK(root_inode->i_mode)) {
char *name = follow_link(host_root_path);
if (IS_ERR(name))
err = PTR_ERR(name);
else
err = read_name(root_inode, name);
kfree(name);
- } else {
- err = read_name(root_inode, host_root_path);
+ if (err)
+ goto out_put;
}
- if (err)
- goto out_put;
err = -ENOMEM;
sb->s_root = d_alloc_root(root_inode);
diff --git a/fs/hostfs/hostfs_user.c b/fs/hostfs/hostfs_user.c
index 701d454a6791c..91ebfcefa409a 100644
--- a/fs/hostfs/hostfs_user.c
+++ b/fs/hostfs/hostfs_user.c
@@ -53,36 +53,6 @@ int stat_file(const char *path, struct hostfs_stat *p, int fd)
return 0;
}
-int file_type(const char *path, int *maj, int *min)
-{
- struct stat64 buf;
-
- if (lstat64(path, &buf) < 0)
- return -errno;
- /*
- * We cannot pass rdev as is because glibc and the kernel disagree
- * about its definition.
- */
- if (maj != NULL)
- *maj = os_major(buf.st_rdev);
- if (min != NULL)
- *min = os_minor(buf.st_rdev);
-
- if (S_ISDIR(buf.st_mode))
- return OS_TYPE_DIR;
- else if (S_ISLNK(buf.st_mode))
- return OS_TYPE_SYMLINK;
- else if (S_ISCHR(buf.st_mode))
- return OS_TYPE_CHARDEV;
- else if (S_ISBLK(buf.st_mode))
- return OS_TYPE_BLOCKDEV;
- else if (S_ISFIFO(buf.st_mode))
- return OS_TYPE_FIFO;
- else if (S_ISSOCK(buf.st_mode))
- return OS_TYPE_SOCK;
- else return OS_TYPE_FILE;
-}
-
int access_file(char *path, int r, int w, int x)
{
int mode = 0;
--
GitLab
From c5322220eb91b9e56ac7b69eb690d9d20fac5725 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 20:42:10 -0400
Subject: [PATCH 596/863] hostfs: get rid of inode_dentry_name()
it's equivalent to dentry_name() anyway
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs_kern.c | 55 +++++++++++++++--------------------------
1 file changed, 20 insertions(+), 35 deletions(-)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index b29a2b878f466..3841fb1ca5a2c 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -89,7 +89,7 @@ __uml_setup("hostfs=", hostfs_args,
);
#endif
-static char *dentry_name(struct dentry *dentry, int extra)
+static char *dentry_name(struct dentry *dentry)
{
struct dentry *parent;
char *root, *name;
@@ -104,7 +104,7 @@ static char *dentry_name(struct dentry *dentry, int extra)
root = parent->d_sb->s_fs_info;
len += strlen(root);
- name = kmalloc(len + extra + 1, GFP_KERNEL);
+ name = kmalloc(len + 1, GFP_KERNEL);
if (name == NULL)
return NULL;
@@ -121,12 +121,12 @@ static char *dentry_name(struct dentry *dentry, int extra)
return name;
}
-static char *inode_name(struct inode *ino, int extra)
+static char *inode_name(struct inode *ino)
{
struct dentry *dentry;
dentry = list_entry(ino->i_dentry.next, struct dentry, d_alias);
- return dentry_name(dentry, extra);
+ return dentry_name(dentry);
}
static char *follow_link(char *link)
@@ -267,7 +267,7 @@ int hostfs_readdir(struct file *file, void *ent, filldir_t filldir)
unsigned long long next, ino;
int error, len;
- name = dentry_name(file->f_path.dentry, 0);
+ name = dentry_name(file->f_path.dentry);
if (name == NULL)
return -ENOMEM;
dir = open_dir(name, &error);
@@ -312,7 +312,7 @@ int hostfs_file_open(struct inode *ino, struct file *file)
if (w)
r = 1;
- name = dentry_name(file->f_path.dentry, 0);
+ name = dentry_name(file->f_path.dentry);
if (name == NULL)
return -ENOMEM;
@@ -519,7 +519,7 @@ int hostfs_create(struct inode *dir, struct dentry *dentry, int mode,
}
error = -ENOMEM;
- name = dentry_name(dentry, 0);
+ name = dentry_name(dentry);
if (name == NULL)
goto out_put;
@@ -561,7 +561,7 @@ struct dentry *hostfs_lookup(struct inode *ino, struct dentry *dentry,
}
err = -ENOMEM;
- name = dentry_name(dentry, 0);
+ name = dentry_name(dentry);
if (name == NULL)
goto out_put;
@@ -585,29 +585,14 @@ struct dentry *hostfs_lookup(struct inode *ino, struct dentry *dentry,
return ERR_PTR(err);
}
-static char *inode_dentry_name(struct inode *ino, struct dentry *dentry)
-{
- char *file;
- int len;
-
- file = inode_name(ino, dentry->d_name.len + 1);
- if (file == NULL)
- return NULL;
- strcat(file, "/");
- len = strlen(file);
- strncat(file, dentry->d_name.name, dentry->d_name.len);
- file[len + dentry->d_name.len] = '\0';
- return file;
-}
-
int hostfs_link(struct dentry *to, struct inode *ino, struct dentry *from)
{
char *from_name, *to_name;
int err;
- if ((from_name = inode_dentry_name(ino, from)) == NULL)
+ if ((from_name = dentry_name(from)) == NULL)
return -ENOMEM;
- to_name = dentry_name(to, 0);
+ to_name = dentry_name(to);
if (to_name == NULL) {
kfree(from_name);
return -ENOMEM;
@@ -623,7 +608,7 @@ int hostfs_unlink(struct inode *ino, struct dentry *dentry)
char *file;
int err;
- if ((file = inode_dentry_name(ino, dentry)) == NULL)
+ if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
if (append)
return -EPERM;
@@ -638,7 +623,7 @@ int hostfs_symlink(struct inode *ino, struct dentry *dentry, const char *to)
char *file;
int err;
- if ((file = inode_dentry_name(ino, dentry)) == NULL)
+ if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = make_symlink(file, to);
kfree(file);
@@ -650,7 +635,7 @@ int hostfs_mkdir(struct inode *ino, struct dentry *dentry, int mode)
char *file;
int err;
- if ((file = inode_dentry_name(ino, dentry)) == NULL)
+ if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = do_mkdir(file, mode);
kfree(file);
@@ -662,7 +647,7 @@ int hostfs_rmdir(struct inode *ino, struct dentry *dentry)
char *file;
int err;
- if ((file = inode_dentry_name(ino, dentry)) == NULL)
+ if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = do_rmdir(file);
kfree(file);
@@ -682,7 +667,7 @@ int hostfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
}
err = -ENOMEM;
- name = dentry_name(dentry, 0);
+ name = dentry_name(dentry);
if (name == NULL)
goto out_put;
@@ -715,9 +700,9 @@ int hostfs_rename(struct inode *from_ino, struct dentry *from,
char *from_name, *to_name;
int err;
- if ((from_name = inode_dentry_name(from_ino, from)) == NULL)
+ if ((from_name = dentry_name(from)) == NULL)
return -ENOMEM;
- if ((to_name = inode_dentry_name(to_ino, to)) == NULL) {
+ if ((to_name = dentry_name(to)) == NULL) {
kfree(from_name);
return -ENOMEM;
}
@@ -735,7 +720,7 @@ int hostfs_permission(struct inode *ino, int desired)
if (desired & MAY_READ) r = 1;
if (desired & MAY_WRITE) w = 1;
if (desired & MAY_EXEC) x = 1;
- name = inode_name(ino, 0);
+ name = inode_name(ino);
if (name == NULL)
return -ENOMEM;
@@ -801,7 +786,7 @@ int hostfs_setattr(struct dentry *dentry, struct iattr *attr)
if (attr->ia_valid & ATTR_MTIME_SET) {
attrs.ia_valid |= HOSTFS_ATTR_MTIME_SET;
}
- name = dentry_name(dentry, 0);
+ name = dentry_name(dentry);
if (name == NULL)
return -ENOMEM;
err = set_attr(name, &attrs, fd);
@@ -856,7 +841,7 @@ int hostfs_link_readpage(struct file *file, struct page *page)
int err;
buffer = kmap(page);
- name = inode_name(page->mapping->host, 0);
+ name = inode_name(page->mapping->host);
if (name == NULL)
return -ENOMEM;
err = hostfs_do_readlink(name, buffer, PAGE_CACHE_SIZE);
--
GitLab
From d0352d3ed722b134dacc21836c1763e7e3523662 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 21:51:16 -0400
Subject: [PATCH 597/863] hostfs: sanitize symlinks
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs_kern.c | 61 +++++++++++++++++++++++------------------
1 file changed, 35 insertions(+), 26 deletions(-)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 3841fb1ca5a2c..10bb71b1548bd 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
+#include <linux/namei.h>
#include "hostfs.h"
#include "init.h"
#include "kern.h"
@@ -48,7 +49,7 @@ static int append = 0;
static const struct inode_operations hostfs_iops;
static const struct inode_operations hostfs_dir_iops;
-static const struct address_space_operations hostfs_link_aops;
+static const struct inode_operations hostfs_link_iops;
#ifndef MODULE
static int __init hostfs_args(char *options, int *add)
@@ -471,8 +472,7 @@ static int read_name(struct inode *ino, char *name)
switch (st.mode & S_IFMT) {
case S_IFLNK:
- ino->i_op = &page_symlink_inode_operations;
- ino->i_mapping->a_ops = &hostfs_link_aops;
+ ino->i_op = &hostfs_link_iops;
break;
case S_IFDIR:
ino->i_op = &hostfs_dir_iops;
@@ -835,32 +835,41 @@ static const struct inode_operations hostfs_dir_iops = {
.setattr = hostfs_setattr,
};
-int hostfs_link_readpage(struct file *file, struct page *page)
-{
- char *buffer, *name;
- int err;
-
- buffer = kmap(page);
- name = inode_name(page->mapping->host);
- if (name == NULL)
- return -ENOMEM;
- err = hostfs_do_readlink(name, buffer, PAGE_CACHE_SIZE);
- kfree(name);
- if (err == PAGE_CACHE_SIZE)
- err = -E2BIG;
- else if (err > 0) {
- flush_dcache_page(page);
- SetPageUptodate(page);
- if (PageError(page)) ClearPageError(page);
- err = 0;
+static void *hostfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+{
+ char *link = __getname();
+ if (link) {
+ char *path = dentry_name(dentry);
+ int err = -ENOMEM;
+ if (path) {
+ int err = hostfs_do_readlink(path, link, PATH_MAX);
+ if (err == PATH_MAX)
+ err = -E2BIG;
+ kfree(path);
+ }
+ if (err < 0) {
+ __putname(link);
+ link = ERR_PTR(err);
+ }
+ } else {
+ link = ERR_PTR(-ENOMEM);
}
- kunmap(page);
- unlock_page(page);
- return err;
+
+ nd_set_link(nd, link);
+ return NULL;
+}
+
+static void hostfs_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
+{
+ char *s = nd_get_link(nd);
+ if (!IS_ERR(s))
+ __putname(s);
}
-static const struct address_space_operations hostfs_link_aops = {
- .readpage = hostfs_link_readpage,
+static const struct inode_operations hostfs_link_iops = {
+ .readlink = generic_readlink,
+ .follow_link = hostfs_follow_link,
+ .put_link = hostfs_put_link,
};
static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
--
GitLab
From c103135c14e03fc9a9e5f0adc01df9ad272cf2a1 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 22:31:14 -0400
Subject: [PATCH 598/863] new helper: __dentry_path()
builds path relative to fs root, called under dcache_lock,
doesn't append any nonsense to unlinked ones.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/dcache.c | 27 ++++++++++++++++++++++-----
include/linux/dcache.h | 1 +
2 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/fs/dcache.c b/fs/dcache.c
index 86d4db15473e5..caf08574982fc 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2049,16 +2049,12 @@ char *dynamic_dname(struct dentry *dentry, char *buffer, int buflen,
/*
* Write full pathname from the root of the filesystem into the buffer.
*/
-char *dentry_path(struct dentry *dentry, char *buf, int buflen)
+char *__dentry_path(struct dentry *dentry, char *buf, int buflen)
{
char *end = buf + buflen;
char *retval;
- spin_lock(&dcache_lock);
prepend(&end, &buflen, "\0", 1);
- if (d_unlinked(dentry) &&
- (prepend(&end, &buflen, "//deleted", 9) != 0))
- goto Elong;
if (buflen < 1)
goto Elong;
/* Get '/' right */
@@ -2076,7 +2072,28 @@ char *dentry_path(struct dentry *dentry, char *buf, int buflen)
retval = end;
dentry = parent;
}
+ return retval;
+Elong:
+ return ERR_PTR(-ENAMETOOLONG);
+}
+EXPORT_SYMBOL(__dentry_path);
+
+char *dentry_path(struct dentry *dentry, char *buf, int buflen)
+{
+ char *p = NULL;
+ char *retval;
+
+ spin_lock(&dcache_lock);
+ if (d_unlinked(dentry)) {
+ p = buf + buflen;
+ if (prepend(&p, &buflen, "//deleted", 10) != 0)
+ goto Elong;
+ buflen++;
+ }
+ retval = __dentry_path(dentry, buf, buflen);
spin_unlock(&dcache_lock);
+ if (!IS_ERR(retval) && p)
+ *p = '/'; /* restore '/' overriden with '\0' */
return retval;
Elong:
spin_unlock(&dcache_lock);
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index eebb617c17d89..d23be0386e2d3 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -315,6 +315,7 @@ extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...);
extern char *__d_path(const struct path *path, struct path *root, char *, int);
extern char *d_path(const struct path *, char *, int);
+extern char *__dentry_path(struct dentry *, char *, int);
extern char *dentry_path(struct dentry *, char *, int);
/* Allocation counts.. */
--
GitLab
From e9193059b1b3733695d5b80e667778311695aa73 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 23:16:34 -0400
Subject: [PATCH 599/863] hostfs: fix races in dentry_name() and inode_name()
calculating size, then doing allocation, then filling the
path is a Bad Idea(tm), since the ancestors can be renamed,
leading to buffer overrun.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs_kern.c | 106 +++++++++++++++++++++++-----------------
1 file changed, 60 insertions(+), 46 deletions(-)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 10bb71b1548bd..79783a0b2f4d0 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -90,44 +90,58 @@ __uml_setup("hostfs=", hostfs_args,
);
#endif
-static char *dentry_name(struct dentry *dentry)
+static char *__dentry_name(struct dentry *dentry, char *name)
{
- struct dentry *parent;
- char *root, *name;
- int len;
+ char *p = __dentry_path(dentry, name, PATH_MAX);
+ char *root;
+ size_t len;
- len = 0;
- parent = dentry;
- while (parent->d_parent != parent) {
- len += parent->d_name.len + 1;
- parent = parent->d_parent;
- }
+ spin_unlock(&dcache_lock);
- root = parent->d_sb->s_fs_info;
- len += strlen(root);
- name = kmalloc(len + 1, GFP_KERNEL);
- if (name == NULL)
+ root = dentry->d_sb->s_fs_info;
+ len = strlen(root);
+ if (IS_ERR(p)) {
+ __putname(name);
return NULL;
-
- name[len] = '\0';
- parent = dentry;
- while (parent->d_parent != parent) {
- len -= parent->d_name.len + 1;
- name[len] = '/';
- strncpy(&name[len + 1], parent->d_name.name,
- parent->d_name.len);
- parent = parent->d_parent;
}
- strncpy(name, root, strlen(root));
+ strncpy(name, root, PATH_MAX);
+ if (len > p - name) {
+ __putname(name);
+ return NULL;
+ }
+ if (p > name + len) {
+ char *s = name + len;
+ while ((*s++ = *p++) != '\0')
+ ;
+ }
return name;
}
+static char *dentry_name(struct dentry *dentry)
+{
+ char *name = __getname();
+ if (!name)
+ return NULL;
+
+ spin_lock(&dcache_lock);
+ return __dentry_name(dentry, name); /* will unlock */
+}
+
static char *inode_name(struct inode *ino)
{
struct dentry *dentry;
+ char *name = __getname();
+ if (!name)
+ return NULL;
- dentry = list_entry(ino->i_dentry.next, struct dentry, d_alias);
- return dentry_name(dentry);
+ spin_lock(&dcache_lock);
+ if (list_empty(&ino->i_dentry)) {
+ spin_unlock(&dcache_lock);
+ __putname(name);
+ return NULL;
+ }
+ dentry = list_first_entry(&ino->i_dentry, struct dentry, d_alias);
+ return __dentry_name(dentry, name); /* will unlock */
}
static char *follow_link(char *link)
@@ -272,7 +286,7 @@ int hostfs_readdir(struct file *file, void *ent, filldir_t filldir)
if (name == NULL)
return -ENOMEM;
dir = open_dir(name, &error);
- kfree(name);
+ __putname(name);
if (dir == NULL)
return -error;
next = file->f_pos;
@@ -318,7 +332,7 @@ int hostfs_file_open(struct inode *ino, struct file *file)
return -ENOMEM;
fd = open_file(name, r, w, append);
- kfree(name);
+ __putname(name);
if (fd < 0)
return fd;
FILE_HOSTFS_I(file)->fd = fd;
@@ -532,7 +546,7 @@ int hostfs_create(struct inode *dir, struct dentry *dentry, int mode,
else
error = read_name(inode, name);
- kfree(name);
+ __putname(name);
if (error)
goto out_put;
@@ -567,7 +581,7 @@ struct dentry *hostfs_lookup(struct inode *ino, struct dentry *dentry,
err = read_name(inode, name);
- kfree(name);
+ __putname(name);
if (err == -ENOENT) {
iput(inode);
inode = NULL;
@@ -594,12 +608,12 @@ int hostfs_link(struct dentry *to, struct inode *ino, struct dentry *from)
return -ENOMEM;
to_name = dentry_name(to);
if (to_name == NULL) {
- kfree(from_name);
+ __putname(from_name);
return -ENOMEM;
}
err = link_file(to_name, from_name);
- kfree(from_name);
- kfree(to_name);
+ __putname(from_name);
+ __putname(to_name);
return err;
}
@@ -614,7 +628,7 @@ int hostfs_unlink(struct inode *ino, struct dentry *dentry)
return -EPERM;
err = unlink_file(file);
- kfree(file);
+ __putname(file);
return err;
}
@@ -626,7 +640,7 @@ int hostfs_symlink(struct inode *ino, struct dentry *dentry, const char *to)
if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = make_symlink(file, to);
- kfree(file);
+ __putname(file);
return err;
}
@@ -638,7 +652,7 @@ int hostfs_mkdir(struct inode *ino, struct dentry *dentry, int mode)
if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = do_mkdir(file, mode);
- kfree(file);
+ __putname(file);
return err;
}
@@ -650,7 +664,7 @@ int hostfs_rmdir(struct inode *ino, struct dentry *dentry)
if ((file = dentry_name(dentry)) == NULL)
return -ENOMEM;
err = do_rmdir(file);
- kfree(file);
+ __putname(file);
return err;
}
@@ -673,13 +687,13 @@ int hostfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
init_special_inode(inode, mode, dev);
err = do_mknod(name, mode, MAJOR(dev), MINOR(dev));
- if (err)
+ if (!err)
goto out_free;
err = read_name(inode, name);
+ __putname(name);
if (err)
goto out_put;
- kfree(name);
if (err)
goto out_put;
@@ -687,7 +701,7 @@ int hostfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
return 0;
out_free:
- kfree(name);
+ __putname(name);
out_put:
iput(inode);
out:
@@ -703,12 +717,12 @@ int hostfs_rename(struct inode *from_ino, struct dentry *from,
if ((from_name = dentry_name(from)) == NULL)
return -ENOMEM;
if ((to_name = dentry_name(to)) == NULL) {
- kfree(from_name);
+ __putname(from_name);
return -ENOMEM;
}
err = rename_file(from_name, to_name);
- kfree(from_name);
- kfree(to_name);
+ __putname(from_name);
+ __putname(to_name);
return err;
}
@@ -729,7 +743,7 @@ int hostfs_permission(struct inode *ino, int desired)
err = 0;
else
err = access_file(name, r, w, x);
- kfree(name);
+ __putname(name);
if (!err)
err = generic_permission(ino, desired, NULL);
return err;
@@ -790,7 +804,7 @@ int hostfs_setattr(struct dentry *dentry, struct iattr *attr)
if (name == NULL)
return -ENOMEM;
err = set_attr(name, &attrs, fd);
- kfree(name);
+ __putname(name);
if (err)
return err;
@@ -845,7 +859,7 @@ static void *hostfs_follow_link(struct dentry *dentry, struct nameidata *nd)
int err = hostfs_do_readlink(path, link, PATH_MAX);
if (err == PATH_MAX)
err = -E2BIG;
- kfree(path);
+ __putname(path);
}
if (err < 0) {
__putname(link);
--
GitLab
From f8d7e1877e5121841bc9a4d284a04dbc13f45bea Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 23:19:04 -0400
Subject: [PATCH 600/863] leak in hostfs_unlink()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs_kern.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 79783a0b2f4d0..8130ce93a06a7 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -622,11 +622,12 @@ int hostfs_unlink(struct inode *ino, struct dentry *dentry)
char *file;
int err;
- if ((file = dentry_name(dentry)) == NULL)
- return -ENOMEM;
if (append)
return -EPERM;
+ if ((file = dentry_name(dentry)) == NULL)
+ return -ENOMEM;
+
err = unlink_file(file);
__putname(file);
return err;
--
GitLab
From f8ad850f11e11d10e7de1a16ca53cb193afc9313 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 6 Jun 2010 23:49:18 -0400
Subject: [PATCH 601/863] try to get rid of races in hostfs open()
In case of mode mismatch, do *not* blindly close the descriptor
another openers might be using right now. Open the underlying
file with currently sufficient mode, then
* if current mode has grown so that it's sufficient for
us now, just close our new fd
* if current mode has grown and our fd is *not* enough
to cover it, close and repeat.
* otherwise, install our fd if the file hadn't been
opened at all or dup2() our fd over the current one (and close
our fd).
Critical section is protected by mutex; yes, system-wide. All
we do under it is a bunch of comparison and maybe an overwriting
dup2() on host.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hostfs/hostfs.h | 1 +
fs/hostfs/hostfs_kern.c | 43 +++++++++++++++++++++++++++++------------
fs/hostfs/hostfs_user.c | 5 +++++
3 files changed, 37 insertions(+), 12 deletions(-)
diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
index ea87e224ed971..6bbd75c5589bc 100644
--- a/fs/hostfs/hostfs.h
+++ b/fs/hostfs/hostfs.h
@@ -74,6 +74,7 @@ extern void *open_dir(char *path, int *err_out);
extern char *read_dir(void *stream, unsigned long long *pos,
unsigned long long *ino_out, int *len_out);
extern void close_file(void *stream);
+extern int replace_file(int oldfd, int fd);
extern void close_dir(void *stream);
extern int read_file(int fd, unsigned long long *offset, char *buf, int len);
extern int write_file(int fd, unsigned long long *offset, const char *buf,
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 8130ce93a06a7..dd1e55535a4e8 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -302,27 +302,22 @@ int hostfs_readdir(struct file *file, void *ent, filldir_t filldir)
int hostfs_file_open(struct inode *ino, struct file *file)
{
+ static DEFINE_MUTEX(open_mutex);
char *name;
fmode_t mode = 0;
+ int err;
int r = 0, w = 0, fd;
mode = file->f_mode & (FMODE_READ | FMODE_WRITE);
if ((mode & HOSTFS_I(ino)->mode) == mode)
return 0;
- /*
- * The file may already have been opened, but with the wrong access,
- * so this resets things and reopens the file with the new access.
- */
- if (HOSTFS_I(ino)->fd != -1) {
- close_file(&HOSTFS_I(ino)->fd);
- HOSTFS_I(ino)->fd = -1;
- }
+ mode |= HOSTFS_I(ino)->mode;
- HOSTFS_I(ino)->mode |= mode;
- if (HOSTFS_I(ino)->mode & FMODE_READ)
+retry:
+ if (mode & FMODE_READ)
r = 1;
- if (HOSTFS_I(ino)->mode & FMODE_WRITE)
+ if (mode & FMODE_WRITE)
w = 1;
if (w)
r = 1;
@@ -335,7 +330,31 @@ int hostfs_file_open(struct inode *ino, struct file *file)
__putname(name);
if (fd < 0)
return fd;
- FILE_HOSTFS_I(file)->fd = fd;
+
+ mutex_lock(&open_mutex);
+ /* somebody else had handled it first? */
+ if ((mode & HOSTFS_I(ino)->mode) == mode) {
+ mutex_unlock(&open_mutex);
+ return 0;
+ }
+ if ((mode | HOSTFS_I(ino)->mode) != mode) {
+ mode |= HOSTFS_I(ino)->mode;
+ mutex_unlock(&open_mutex);
+ close_file(&fd);
+ goto retry;
+ }
+ if (HOSTFS_I(ino)->fd == -1) {
+ HOSTFS_I(ino)->fd = fd;
+ } else {
+ err = replace_file(fd, HOSTFS_I(ino)->fd);
+ close_file(&fd);
+ if (err < 0) {
+ mutex_unlock(&open_mutex);
+ return err;
+ }
+ }
+ HOSTFS_I(ino)->mode = mode;
+ mutex_unlock(&open_mutex);
return 0;
}
diff --git a/fs/hostfs/hostfs_user.c b/fs/hostfs/hostfs_user.c
index 91ebfcefa409a..6777aa06ce2cc 100644
--- a/fs/hostfs/hostfs_user.c
+++ b/fs/hostfs/hostfs_user.c
@@ -160,6 +160,11 @@ int fsync_file(int fd, int datasync)
return 0;
}
+int replace_file(int oldfd, int fd)
+{
+ return dup2(oldfd, fd);
+}
+
void close_file(void *stream)
{
close(*((int *) stream));
--
GitLab
From 33b0daaa5557e9dadf4c27407fae7d316bab5686 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 00:12:50 -0400
Subject: [PATCH 602/863] switch hppfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hppfs/hppfs.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index 943ce751ce19b..7b027720d8209 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -624,12 +624,11 @@ static struct inode *hppfs_alloc_inode(struct super_block *sb)
return &hi->vfs_inode;
}
-void hppfs_delete_inode(struct inode *ino)
+void hppfs_evict_inode(struct inode *ino)
{
+ end_writeback(ino);
dput(HPPFS_I(ino)->proc_dentry);
mntput(ino->i_sb->s_fs_info);
-
- clear_inode(ino);
}
static void hppfs_destroy_inode(struct inode *inode)
@@ -640,7 +639,7 @@ static void hppfs_destroy_inode(struct inode *inode)
static const struct super_operations hppfs_sbops = {
.alloc_inode = hppfs_alloc_inode,
.destroy_inode = hppfs_destroy_inode,
- .delete_inode = hppfs_delete_inode,
+ .evict_inode = hppfs_evict_inode,
.statfs = hppfs_statfs,
};
--
GitLab
From ea544009206baa03d606161656618900260b48e5 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 00:18:40 -0400
Subject: [PATCH 603/863] switch hpfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/hpfs/hpfs_fn.h | 2 +-
fs/hpfs/inode.c | 12 +++++++-----
fs/hpfs/super.c | 2 +-
3 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index 75f9d43248511..b59eac0232a0f 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -281,7 +281,7 @@ void hpfs_write_inode(struct inode *);
void hpfs_write_inode_nolock(struct inode *);
int hpfs_setattr(struct dentry *, struct iattr *);
void hpfs_write_if_changed(struct inode *);
-void hpfs_delete_inode(struct inode *);
+void hpfs_evict_inode(struct inode *);
/* map.c */
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 3f3b397fd4e6c..56f0da1cfd106 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -302,11 +302,13 @@ void hpfs_write_if_changed(struct inode *inode)
hpfs_write_inode(inode);
}
-void hpfs_delete_inode(struct inode *inode)
+void hpfs_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
- lock_kernel();
- hpfs_remove_fnode(inode->i_sb, inode->i_ino);
- unlock_kernel();
- clear_inode(inode);
+ end_writeback(inode);
+ if (!inode->i_nlink) {
+ lock_kernel();
+ hpfs_remove_fnode(inode->i_sb, inode->i_ino);
+ unlock_kernel();
+ }
}
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index aa53842c599c2..2607010be2fe5 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -450,7 +450,7 @@ static const struct super_operations hpfs_sops =
{
.alloc_inode = hpfs_alloc_inode,
.destroy_inode = hpfs_destroy_inode,
- .delete_inode = hpfs_delete_inode,
+ .evict_inode = hpfs_evict_inode,
.put_super = hpfs_put_super,
.statfs = hpfs_statfs,
.remount_fs = hpfs_remount_fs,
--
GitLab
From 62aff86fdf18657d9eca7878654415f94f16d027 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 00:28:54 -0400
Subject: [PATCH 604/863] switch jfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/jfs/inode.c | 35 ++++++++++++++++++-----------------
fs/jfs/jfs_inode.h | 2 +-
fs/jfs/super.c | 8 +-------
3 files changed, 20 insertions(+), 25 deletions(-)
diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c
index c38dc1806281e..9978803ceedc5 100644
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -145,31 +145,32 @@ int jfs_write_inode(struct inode *inode, struct writeback_control *wbc)
return 0;
}
-void jfs_delete_inode(struct inode *inode)
+void jfs_evict_inode(struct inode *inode)
{
- jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
+ jfs_info("In jfs_evict_inode, inode = 0x%p", inode);
- if (!is_bad_inode(inode))
+ if (!inode->i_nlink && !is_bad_inode(inode)) {
dquot_initialize(inode);
- if (!is_bad_inode(inode) &&
- (JFS_IP(inode)->fileset == FILESYSTEM_I)) {
- truncate_inode_pages(&inode->i_data, 0);
+ if (JFS_IP(inode)->fileset == FILESYSTEM_I) {
+ truncate_inode_pages(&inode->i_data, 0);
- if (test_cflag(COMMIT_Freewmap, inode))
- jfs_free_zero_link(inode);
+ if (test_cflag(COMMIT_Freewmap, inode))
+ jfs_free_zero_link(inode);
- diFree(inode);
+ diFree(inode);
- /*
- * Free the inode from the quota allocation.
- */
- dquot_initialize(inode);
- dquot_free_inode(inode);
- dquot_drop(inode);
+ /*
+ * Free the inode from the quota allocation.
+ */
+ dquot_initialize(inode);
+ dquot_free_inode(inode);
+ }
+ } else {
+ truncate_inode_pages(&inode->i_data, 0);
}
-
- clear_inode(inode);
+ end_writeback(inode);
+ dquot_drop(inode);
}
void jfs_dirty_inode(struct inode *inode)
diff --git a/fs/jfs/jfs_inode.h b/fs/jfs/jfs_inode.h
index 11042b1f44b5f..155e91eff07d6 100644
--- a/fs/jfs/jfs_inode.h
+++ b/fs/jfs/jfs_inode.h
@@ -27,7 +27,7 @@ extern long jfs_compat_ioctl(struct file *, unsigned int, unsigned long);
extern struct inode *jfs_iget(struct super_block *, unsigned long);
extern int jfs_commit_inode(struct inode *, int);
extern int jfs_write_inode(struct inode *, struct writeback_control *);
-extern void jfs_delete_inode(struct inode *);
+extern void jfs_evict_inode(struct inode *);
extern void jfs_dirty_inode(struct inode *);
extern void jfs_truncate(struct inode *);
extern void jfs_truncate_nolock(struct inode *, loff_t);
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index b38f96bef8292..ec8c3e4baca3f 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -132,11 +132,6 @@ static void jfs_destroy_inode(struct inode *inode)
kmem_cache_free(jfs_inode_cachep, ji);
}
-static void jfs_clear_inode(struct inode *inode)
-{
- dquot_drop(inode);
-}
-
static int jfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct jfs_sb_info *sbi = JFS_SBI(dentry->d_sb);
@@ -765,8 +760,7 @@ static const struct super_operations jfs_super_operations = {
.destroy_inode = jfs_destroy_inode,
.dirty_inode = jfs_dirty_inode,
.write_inode = jfs_write_inode,
- .delete_inode = jfs_delete_inode,
- .clear_inode = jfs_clear_inode,
+ .evict_inode = jfs_evict_inode,
.put_super = jfs_put_super,
.sync_fs = jfs_sync_fs,
.freeze_fs = jfs_freeze,
--
GitLab
From d640e1b50885b5beb61ccacdebf9f3f05ee2119c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 00:34:05 -0400
Subject: [PATCH 605/863] switch ubifs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ubifs/super.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 4d2f2157dd3fa..899066dd0c143 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -327,7 +327,7 @@ static int ubifs_write_inode(struct inode *inode, struct writeback_control *wbc)
return err;
}
-static void ubifs_delete_inode(struct inode *inode)
+static void ubifs_evict_inode(struct inode *inode)
{
int err;
struct ubifs_info *c = inode->i_sb->s_fs_info;
@@ -343,9 +343,12 @@ static void ubifs_delete_inode(struct inode *inode)
dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
ubifs_assert(!atomic_read(&inode->i_count));
- ubifs_assert(inode->i_nlink == 0);
truncate_inode_pages(&inode->i_data, 0);
+
+ if (inode->i_nlink)
+ goto done;
+
if (is_bad_inode(inode))
goto out;
@@ -367,7 +370,8 @@ static void ubifs_delete_inode(struct inode *inode)
c->nospace = c->nospace_rp = 0;
smp_wmb();
}
- clear_inode(inode);
+done:
+ end_writeback(inode);
}
static void ubifs_dirty_inode(struct inode *inode)
@@ -1824,7 +1828,7 @@ const struct super_operations ubifs_super_operations = {
.destroy_inode = ubifs_destroy_inode,
.put_super = ubifs_put_super,
.write_inode = ubifs_write_inode,
- .delete_inode = ubifs_delete_inode,
+ .evict_inode = ubifs_evict_inode,
.statfs = ubifs_statfs,
.dirty_inode = ubifs_dirty_inode,
.remount_fs = ubifs_remount_fs,
--
GitLab
From 3aac2b62e0f345c8a637cf94dc62e9000de9d8b6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 00:43:39 -0400
Subject: [PATCH 606/863] switch udf to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/udf/ialloc.c | 2 --
fs/udf/inode.c | 48 +++++++++++++++++++-----------------------------
fs/udf/super.c | 3 +--
fs/udf/udfdecl.h | 3 +--
4 files changed, 21 insertions(+), 35 deletions(-)
diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index 18cd7111185dc..75d9304d0dc3a 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -31,8 +31,6 @@ void udf_free_inode(struct inode *inode)
struct super_block *sb = inode->i_sb;
struct udf_sb_info *sbi = UDF_SB(sb);
- clear_inode(inode);
-
mutex_lock(&sbi->s_alloc_mutex);
if (sbi->s_lvid_bh) {
struct logicalVolIntegrityDescImpUse *lvidiu =
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index ecddcc2ed7463..fc48f37aa2dd0 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -68,37 +68,23 @@ static void udf_update_extents(struct inode *,
static int udf_get_block(struct inode *, sector_t, struct buffer_head *, int);
-void udf_delete_inode(struct inode *inode)
-{
- truncate_inode_pages(&inode->i_data, 0);
-
- if (is_bad_inode(inode))
- goto no_delete;
-
- inode->i_size = 0;
- udf_truncate(inode);
- lock_kernel();
-
- udf_update_inode(inode, IS_SYNC(inode));
- udf_free_inode(inode);
-
- unlock_kernel();
- return;
-
-no_delete:
- clear_inode(inode);
-}
-
-/*
- * If we are going to release inode from memory, we truncate last inode extent
- * to proper length. We could use drop_inode() but it's called under inode_lock
- * and thus we cannot mark inode dirty there. We use clear_inode() but we have
- * to make sure to write inode as it's not written automatically.
- */
-void udf_clear_inode(struct inode *inode)
+void udf_evict_inode(struct inode *inode)
{
struct udf_inode_info *iinfo = UDF_I(inode);
+ int want_delete = 0;
+ truncate_inode_pages(&inode->i_data, 0);
+
+ if (!inode->i_nlink && !is_bad_inode(inode)) {
+ want_delete = 1;
+ inode->i_size = 0;
+ udf_truncate(inode);
+ lock_kernel();
+ udf_update_inode(inode, IS_SYNC(inode));
+ unlock_kernel();
+ }
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
inode->i_size != iinfo->i_lenExtents) {
printk(KERN_WARNING "UDF-fs (%s): Inode %lu (mode %o) has "
@@ -108,9 +94,13 @@ void udf_clear_inode(struct inode *inode)
(unsigned long long)inode->i_size,
(unsigned long long)iinfo->i_lenExtents);
}
-
kfree(iinfo->i_ext.i_data);
iinfo->i_ext.i_data = NULL;
+ if (want_delete) {
+ lock_kernel();
+ udf_free_inode(inode);
+ unlock_kernel();
+ }
}
static int udf_writepage(struct page *page, struct writeback_control *wbc)
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 612d1e2e285a1..f9f4a9a0ea2bc 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -175,8 +175,7 @@ static const struct super_operations udf_sb_ops = {
.alloc_inode = udf_alloc_inode,
.destroy_inode = udf_destroy_inode,
.write_inode = udf_write_inode,
- .delete_inode = udf_delete_inode,
- .clear_inode = udf_clear_inode,
+ .evict_inode = udf_evict_inode,
.put_super = udf_put_super,
.sync_fs = udf_sync_fs,
.statfs = udf_statfs,
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index 2bac0354891f7..6995ab1f4305b 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -139,8 +139,7 @@ extern struct buffer_head *udf_expand_dir_adinicb(struct inode *, int *, int *);
extern struct buffer_head *udf_bread(struct inode *, int, int, int *);
extern void udf_truncate(struct inode *);
extern void udf_read_inode(struct inode *);
-extern void udf_delete_inode(struct inode *);
-extern void udf_clear_inode(struct inode *);
+extern void udf_evict_inode(struct inode *);
extern int udf_write_inode(struct inode *, struct writeback_control *wbc);
extern long udf_block_map(struct inode *, sector_t);
extern int udf_extend_file(struct inode *, struct extent_position *,
--
GitLab
From 94ee8494ac84606f06d522a2c016d40aabffb378 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 00:45:56 -0400
Subject: [PATCH 607/863] switch ncpfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ncpfs/inode.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index b4e8aaae14be5..c0434313f9209 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -43,7 +43,7 @@
#define NCP_DEFAULT_TIME_OUT 10
#define NCP_DEFAULT_RETRY_COUNT 20
-static void ncp_delete_inode(struct inode *);
+static void ncp_evict_inode(struct inode *);
static void ncp_put_super(struct super_block *);
static int ncp_statfs(struct dentry *, struct kstatfs *);
static int ncp_show_options(struct seq_file *, struct vfsmount *);
@@ -100,7 +100,7 @@ static const struct super_operations ncp_sops =
.alloc_inode = ncp_alloc_inode,
.destroy_inode = ncp_destroy_inode,
.drop_inode = generic_delete_inode,
- .delete_inode = ncp_delete_inode,
+ .evict_inode = ncp_evict_inode,
.put_super = ncp_put_super,
.statfs = ncp_statfs,
.remount_fs = ncp_remount,
@@ -282,19 +282,19 @@ ncp_iget(struct super_block *sb, struct ncp_entry_info *info)
}
static void
-ncp_delete_inode(struct inode *inode)
+ncp_evict_inode(struct inode *inode)
{
truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (S_ISDIR(inode->i_mode)) {
- DDPRINTK("ncp_delete_inode: put directory %ld\n", inode->i_ino);
+ DDPRINTK("ncp_evict_inode: put directory %ld\n", inode->i_ino);
}
if (ncp_make_closed(inode) != 0) {
/* We can't do anything but complain. */
- printk(KERN_ERR "ncp_delete_inode: could not close\n");
+ printk(KERN_ERR "ncp_evict_inode: could not close\n");
}
- clear_inode(inode);
}
static void ncp_stop_tasks(struct ncp_server *server) {
--
GitLab
From 066d92dcbfa5842d98f6c4c671220cef50a9720f Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 8 Jun 2010 21:28:10 -0400
Subject: [PATCH 608/863] convert ocfs2 to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ocfs2/inode.c | 21 ++++++++++++++-------
fs/ocfs2/inode.h | 3 +--
fs/ocfs2/super.c | 3 +--
3 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index abb0a95cc7170..eb7fd07c90f22 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -969,7 +969,7 @@ static void ocfs2_cleanup_delete_inode(struct inode *inode,
truncate_inode_pages(&inode->i_data, 0);
}
-void ocfs2_delete_inode(struct inode *inode)
+static void ocfs2_delete_inode(struct inode *inode)
{
int wipe, status;
sigset_t oldset;
@@ -1075,20 +1075,17 @@ void ocfs2_delete_inode(struct inode *inode)
bail_unblock:
ocfs2_unblock_signals(&oldset);
bail:
- clear_inode(inode);
mlog_exit_void();
}
-void ocfs2_clear_inode(struct inode *inode)
+static void ocfs2_clear_inode(struct inode *inode)
{
int status;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
mlog_entry_void();
- if (!inode)
- goto bail;
-
+ end_writeback(inode);
mlog(0, "Clearing inode: %llu, nlink = %u\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_nlink);
@@ -1180,10 +1177,20 @@ void ocfs2_clear_inode(struct inode *inode)
jbd2_journal_release_jbd_inode(OCFS2_SB(inode->i_sb)->journal->j_journal,
&oi->ip_jinode);
-bail:
mlog_exit_void();
}
+void ocfs2_evict_inode(struct inode *inode)
+{
+ if (!inode->i_nlink ||
+ (OCFS2_I(inode)->ip_flags & OCFS2_INODE_MAYBE_ORPHANED)) {
+ ocfs2_delete_inode(inode);
+ } else {
+ truncate_inode_pages(&inode->i_data, 0);
+ }
+ ocfs2_clear_inode(inode);
+}
+
/* Called under inode_lock, with no more references on the
* struct inode, so it's safe here to check the flags field
* and to manipulate i_nlink without any other locks. */
diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h
index 9f5f5fcadc45b..975eedd7b2432 100644
--- a/fs/ocfs2/inode.h
+++ b/fs/ocfs2/inode.h
@@ -123,8 +123,7 @@ static inline struct ocfs2_caching_info *INODE_CACHE(struct inode *inode)
return &OCFS2_I(inode)->ip_metadata_cache;
}
-void ocfs2_clear_inode(struct inode *inode);
-void ocfs2_delete_inode(struct inode *inode);
+void ocfs2_evict_inode(struct inode *inode);
void ocfs2_drop_inode(struct inode *inode);
/* Flags for ocfs2_iget() */
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 0eaa929a4dbf2..ae1a4437a9803 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -145,8 +145,7 @@ static const struct super_operations ocfs2_sops = {
.alloc_inode = ocfs2_alloc_inode,
.destroy_inode = ocfs2_destroy_inode,
.drop_inode = ocfs2_drop_inode,
- .clear_inode = ocfs2_clear_inode,
- .delete_inode = ocfs2_delete_inode,
+ .evict_inode = ocfs2_evict_inode,
.sync_fs = ocfs2_sync_fs,
.put_super = ocfs2_put_super,
.remount_fs = ocfs2_remount,
--
GitLab
From d5c1515cf374951f07e5bf97b6ff3718d3401b6f Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 11:05:19 -0400
Subject: [PATCH 609/863] switch gfs2 to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/gfs2/super.c | 39 +++++++++++++++------------------------
1 file changed, 15 insertions(+), 24 deletions(-)
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 4d1aad38f1b13..555f5a417c679 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1203,25 +1203,6 @@ static void gfs2_drop_inode(struct inode *inode)
generic_drop_inode(inode);
}
-/**
- * gfs2_clear_inode - Deallocate an inode when VFS is done with it
- * @inode: The VFS inode
- *
- */
-
-static void gfs2_clear_inode(struct inode *inode)
-{
- struct gfs2_inode *ip = GFS2_I(inode);
-
- ip->i_gl->gl_object = NULL;
- gfs2_glock_put(ip->i_gl);
- ip->i_gl = NULL;
- if (ip->i_iopen_gh.gh_gl) {
- ip->i_iopen_gh.gh_gl->gl_object = NULL;
- gfs2_glock_dq_uninit(&ip->i_iopen_gh);
- }
-}
-
static int is_ancestor(const struct dentry *d1, const struct dentry *d2)
{
do {
@@ -1347,13 +1328,16 @@ static int gfs2_show_options(struct seq_file *s, struct vfsmount *mnt)
* is safe, just less efficient.
*/
-static void gfs2_delete_inode(struct inode *inode)
+static void gfs2_evict_inode(struct inode *inode)
{
struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_holder gh;
int error;
+ if (inode->i_nlink)
+ goto out;
+
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
if (unlikely(error)) {
gfs2_glock_dq_uninit(&ip->i_iopen_gh);
@@ -1407,10 +1391,18 @@ static void gfs2_delete_inode(struct inode *inode)
gfs2_holder_uninit(&ip->i_iopen_gh);
gfs2_glock_dq_uninit(&gh);
if (error && error != GLR_TRYFAILED && error != -EROFS)
- fs_warn(sdp, "gfs2_delete_inode: %d\n", error);
+ fs_warn(sdp, "gfs2_evict_inode: %d\n", error);
out:
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ end_writeback(inode);
+
+ ip->i_gl->gl_object = NULL;
+ gfs2_glock_put(ip->i_gl);
+ ip->i_gl = NULL;
+ if (ip->i_iopen_gh.gh_gl) {
+ ip->i_iopen_gh.gh_gl->gl_object = NULL;
+ gfs2_glock_dq_uninit(&ip->i_iopen_gh);
+ }
}
static struct inode *gfs2_alloc_inode(struct super_block *sb)
@@ -1434,14 +1426,13 @@ const struct super_operations gfs2_super_ops = {
.alloc_inode = gfs2_alloc_inode,
.destroy_inode = gfs2_destroy_inode,
.write_inode = gfs2_write_inode,
- .delete_inode = gfs2_delete_inode,
+ .evict_inode = gfs2_evict_inode,
.put_super = gfs2_put_super,
.sync_fs = gfs2_sync_fs,
.freeze_fs = gfs2_freeze,
.unfreeze_fs = gfs2_unfreeze,
.statfs = gfs2_statfs,
.remount_fs = gfs2_remount_fs,
- .clear_inode = gfs2_clear_inode,
.drop_inode = gfs2_drop_inode,
.show_options = gfs2_show_options,
};
--
GitLab
From bd55597520a2eaa0d71dd7683513a14bfd1bdf5c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 11:35:40 -0400
Subject: [PATCH 610/863] convert btrfs to ->evict_inode()
NB: do we want btrfs_wait_ordered_range() on eviction of
inodes with positive i_nlink on subvolume with zero root_refs?
If not, btrfs_evict_inode() can be simplified by unconditionally
bailing out in case of i_nlink > 0 in the very beginning...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/btrfs/ctree.h | 2 +-
fs/btrfs/inode.c | 8 ++++++--
fs/btrfs/super.c | 2 +-
3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 29c20092847e8..394d5422ab6a7 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2389,7 +2389,7 @@ unsigned long btrfs_force_ra(struct address_space *mapping,
pgoff_t offset, pgoff_t last_index);
int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
int btrfs_readpage(struct file *file, struct page *page);
-void btrfs_delete_inode(struct inode *inode);
+void btrfs_evict_inode(struct inode *inode);
void btrfs_put_inode(struct inode *inode);
int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc);
void btrfs_dirty_inode(struct inode *inode);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 95eac01169637..ce02199ec4e54 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3668,7 +3668,7 @@ static int btrfs_setattr(struct dentry *dentry, struct iattr *attr)
return err;
}
-void btrfs_delete_inode(struct inode *inode)
+void btrfs_evict_inode(struct inode *inode)
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
@@ -3676,10 +3676,14 @@ void btrfs_delete_inode(struct inode *inode)
int ret;
truncate_inode_pages(&inode->i_data, 0);
+ if (inode->i_nlink && btrfs_root_refs(&root->root_item) != 0)
+ goto no_delete;
+
if (is_bad_inode(inode)) {
btrfs_orphan_del(NULL, inode);
goto no_delete;
}
+ /* do we really want it for ->i_nlink > 0 and zero btrfs_root_refs? */
btrfs_wait_ordered_range(inode, 0, (u64)-1);
if (root->fs_info->log_root_recovering) {
@@ -3729,7 +3733,7 @@ void btrfs_delete_inode(struct inode *inode)
btrfs_end_transaction(trans, root);
btrfs_btree_balance_dirty(root, nr);
no_delete:
- clear_inode(inode);
+ end_writeback(inode);
return;
}
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index f2393b3903181..1776dbd8dc981 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -797,7 +797,7 @@ static int btrfs_unfreeze(struct super_block *sb)
static const struct super_operations btrfs_super_ops = {
.drop_inode = btrfs_drop_inode,
- .delete_inode = btrfs_delete_inode,
+ .evict_inode = btrfs_evict_inode,
.put_super = btrfs_put_super,
.sync_fs = btrfs_sync_fs,
.show_options = btrfs_show_options,
--
GitLab
From 845a2cc0507055278e0fa722ed0f8c791b7401dd Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 11:37:37 -0400
Subject: [PATCH 611/863] convert reiserfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/reiserfs/inode.c | 13 ++++++++++---
fs/reiserfs/super.c | 8 +-------
include/linux/reiserfs_fs.h | 2 +-
3 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 46ba1cfc2df30..a94e08b339fc6 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -25,7 +25,7 @@ int reiserfs_commit_write(struct file *f, struct page *page,
int reiserfs_prepare_write(struct file *f, struct page *page,
unsigned from, unsigned to);
-void reiserfs_delete_inode(struct inode *inode)
+void reiserfs_evict_inode(struct inode *inode)
{
/* We need blocks for transaction + (user+group) quota update (possibly delete) */
int jbegin_count =
@@ -35,10 +35,12 @@ void reiserfs_delete_inode(struct inode *inode)
int depth;
int err;
- if (!is_bad_inode(inode))
+ if (!inode->i_nlink && !is_bad_inode(inode))
dquot_initialize(inode);
truncate_inode_pages(&inode->i_data, 0);
+ if (inode->i_nlink)
+ goto no_delete;
depth = reiserfs_write_lock_once(inode->i_sb);
@@ -77,9 +79,14 @@ void reiserfs_delete_inode(struct inode *inode)
;
}
out:
- clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */
+ end_writeback(inode); /* note this must go after the journal_end to prevent deadlock */
+ dquot_drop(inode);
inode->i_blocks = 0;
reiserfs_write_unlock_once(inode->i_sb, depth);
+
+no_delete:
+ end_writeback(inode);
+ dquot_drop(inode);
}
static void _make_cpu_key(struct cpu_key *key, int version, __u32 dirid,
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1e1ee9056eb6a..e15ff612002d3 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -591,11 +591,6 @@ static void reiserfs_dirty_inode(struct inode *inode)
reiserfs_write_unlock_once(inode->i_sb, lock_depth);
}
-static void reiserfs_clear_inode(struct inode *inode)
-{
- dquot_drop(inode);
-}
-
#ifdef CONFIG_QUOTA
static ssize_t reiserfs_quota_write(struct super_block *, int, const char *,
size_t, loff_t);
@@ -608,8 +603,7 @@ static const struct super_operations reiserfs_sops = {
.destroy_inode = reiserfs_destroy_inode,
.write_inode = reiserfs_write_inode,
.dirty_inode = reiserfs_dirty_inode,
- .clear_inode = reiserfs_clear_inode,
- .delete_inode = reiserfs_delete_inode,
+ .evict_inode = reiserfs_evict_inode,
.put_super = reiserfs_put_super,
.write_super = reiserfs_write_super,
.sync_fs = reiserfs_sync_fs,
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 3b603f4741861..2a464ae147ce0 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -2033,7 +2033,7 @@ void reiserfs_read_locked_inode(struct inode *inode,
struct reiserfs_iget_args *args);
int reiserfs_find_actor(struct inode *inode, void *p);
int reiserfs_init_locked_inode(struct inode *inode, void *p);
-void reiserfs_delete_inode(struct inode *inode);
+void reiserfs_evict_inode(struct inode *inode);
int reiserfs_write_inode(struct inode *inode, struct writeback_control *wbc);
int reiserfs_get_block(struct inode *inode, sector_t block,
struct buffer_head *bh_result, int create);
--
GitLab
From 4ec70c9b46b032e7f1b41b543c607d6a33b78a1a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 11:42:26 -0400
Subject: [PATCH 612/863] convert exofs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/exofs/exofs.h | 2 +-
fs/exofs/inode.c | 8 ++++----
fs/exofs/super.c | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h
index 0706ce996c848..2dc925fa10106 100644
--- a/fs/exofs/exofs.h
+++ b/fs/exofs/exofs.h
@@ -263,7 +263,7 @@ int exofs_write_begin(struct file *file, struct address_space *mapping,
extern struct inode *exofs_iget(struct super_block *, unsigned long);
struct inode *exofs_new_inode(struct inode *, int);
extern int exofs_write_inode(struct inode *, struct writeback_control *wbc);
-extern void exofs_delete_inode(struct inode *);
+extern void exofs_evict_inode(struct inode *);
/* dir.c: */
int exofs_add_link(struct dentry *, struct inode *);
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index ccd0ce3eea755..088cb476b68a8 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -1307,7 +1307,7 @@ static void delete_done(struct exofs_io_state *ios, void *p)
* from the OSD here. We make sure the object was created before we try and
* delete it.
*/
-void exofs_delete_inode(struct inode *inode)
+void exofs_evict_inode(struct inode *inode)
{
struct exofs_i_info *oi = exofs_i(inode);
struct super_block *sb = inode->i_sb;
@@ -1318,11 +1318,11 @@ void exofs_delete_inode(struct inode *inode)
truncate_inode_pages(&inode->i_data, 0);
/* TODO: should do better here */
- if (is_bad_inode(inode))
+ if (inode->i_nlink || is_bad_inode(inode))
goto no_delete;
inode->i_size = 0;
- clear_inode(inode);
+ end_writeback(inode);
/* if we are deleting an obj that hasn't been created yet, wait */
if (!obj_created(oi)) {
@@ -1353,5 +1353,5 @@ void exofs_delete_inode(struct inode *inode)
return;
no_delete:
- clear_inode(inode);
+ end_writeback(inode);
}
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 03149b9a51781..32cfd61def5fa 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -743,7 +743,7 @@ static const struct super_operations exofs_sops = {
.alloc_inode = exofs_alloc_inode,
.destroy_inode = exofs_destroy_inode,
.write_inode = exofs_write_inode,
- .delete_inode = exofs_delete_inode,
+ .evict_inode = exofs_evict_inode,
.put_super = exofs_put_super,
.write_super = exofs_write_super,
.sync_fs = exofs_sync_fs,
--
GitLab
From 6fd1e5c994c392ebdbe45600051b2a32ec4860f1 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 11:55:00 -0400
Subject: [PATCH 613/863] convert nilfs2 to ->evict_inode()
[folded build fix from sfr]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/nilfs2/inode.c | 28 ++++++++++++++++++++++++----
fs/nilfs2/nilfs.h | 2 +-
fs/nilfs2/super.c | 20 +-------------------
3 files changed, 26 insertions(+), 24 deletions(-)
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 051d279abb379..eccb2f2e2315b 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -27,6 +27,7 @@
#include <linux/writeback.h>
#include <linux/uio.h>
#include "nilfs.h"
+#include "btnode.h"
#include "segment.h"
#include "page.h"
#include "mdt.h"
@@ -354,7 +355,6 @@ void nilfs_free_inode(struct inode *inode)
struct super_block *sb = inode->i_sb;
struct nilfs_sb_info *sbi = NILFS_SB(sb);
- clear_inode(inode);
/* XXX: check error code? Is there any thing I can do? */
(void) nilfs_ifile_delete_inode(sbi->s_ifile, inode->i_ino);
atomic_dec(&sbi->s_inodes_count);
@@ -614,16 +614,34 @@ void nilfs_truncate(struct inode *inode)
But truncate has no return value. */
}
-void nilfs_delete_inode(struct inode *inode)
+static void nilfs_clear_inode(struct inode *inode)
+{
+ struct nilfs_inode_info *ii = NILFS_I(inode);
+
+ /*
+ * Free resources allocated in nilfs_read_inode(), here.
+ */
+ BUG_ON(!list_empty(&ii->i_dirty));
+ brelse(ii->i_bh);
+ ii->i_bh = NULL;
+
+ if (test_bit(NILFS_I_BMAP, &ii->i_state))
+ nilfs_bmap_clear(ii->i_bmap);
+
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
+}
+
+void nilfs_evict_inode(struct inode *inode)
{
struct nilfs_transaction_info ti;
struct super_block *sb = inode->i_sb;
struct nilfs_inode_info *ii = NILFS_I(inode);
- if (unlikely(is_bad_inode(inode))) {
+ if (inode->i_nlink || unlikely(is_bad_inode(inode))) {
if (inode->i_data.nrpages)
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ end_writeback(inode);
+ nilfs_clear_inode(inode);
return;
}
nilfs_transaction_begin(sb, &ti, 0); /* never fails */
@@ -633,6 +651,8 @@ void nilfs_delete_inode(struct inode *inode)
nilfs_truncate_bmap(ii, 0);
nilfs_mark_inode_dirty(inode);
+ end_writeback(inode);
+ nilfs_clear_inode(inode);
nilfs_free_inode(inode);
/* nilfs_free_inode() marks inode buffer dirty */
if (IS_SYNC(inode))
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 47d6d7928122b..f03279748099d 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -245,7 +245,7 @@ extern void nilfs_write_inode_common(struct inode *, struct nilfs_inode *, int);
extern struct inode *nilfs_iget(struct super_block *, unsigned long);
extern void nilfs_update_inode(struct inode *, struct buffer_head *);
extern void nilfs_truncate(struct inode *);
-extern void nilfs_delete_inode(struct inode *);
+extern void nilfs_evict_inode(struct inode *);
extern int nilfs_setattr(struct dentry *, struct iattr *);
extern int nilfs_load_inode_block(struct nilfs_sb_info *, struct inode *,
struct buffer_head **);
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 414ef68931cf4..7c7572a4e1388 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -159,23 +159,6 @@ void nilfs_destroy_inode(struct inode *inode)
kmem_cache_free(nilfs_inode_cachep, NILFS_I(inode));
}
-static void nilfs_clear_inode(struct inode *inode)
-{
- struct nilfs_inode_info *ii = NILFS_I(inode);
-
- /*
- * Free resources allocated in nilfs_read_inode(), here.
- */
- BUG_ON(!list_empty(&ii->i_dirty));
- brelse(ii->i_bh);
- ii->i_bh = NULL;
-
- if (test_bit(NILFS_I_BMAP, &ii->i_state))
- nilfs_bmap_clear(ii->i_bmap);
-
- nilfs_btnode_cache_clear(&ii->i_btnode_cache);
-}
-
static int nilfs_sync_super(struct nilfs_sb_info *sbi, int dupsb)
{
struct the_nilfs *nilfs = sbi->s_nilfs;
@@ -467,7 +450,7 @@ static const struct super_operations nilfs_sops = {
/* .write_inode = nilfs_write_inode, */
/* .put_inode = nilfs_put_inode, */
/* .drop_inode = nilfs_drop_inode, */
- .delete_inode = nilfs_delete_inode,
+ .evict_inode = nilfs_evict_inode,
.put_super = nilfs_put_super,
/* .write_super = nilfs_write_super, */
.sync_fs = nilfs_sync_fs,
@@ -475,7 +458,6 @@ static const struct super_operations nilfs_sops = {
/* .unlockfs */
.statfs = nilfs_statfs,
.remount_fs = nilfs_remount,
- .clear_inode = nilfs_clear_inode,
/* .umount_begin */
.show_options = nilfs_show_options
};
--
GitLab
From 8e22c1a4e429e9facf309c7e7a03ba9cdfd7b106 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 12:22:31 -0400
Subject: [PATCH 614/863] logfs: get rid of magical inodes
ordering problems at ->kill_sb() time are solved by doing iput()
of these suckers in ->put_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/logfs/inode.c | 44 ++++++++++++++++----------------------------
fs/logfs/journal.c | 2 --
fs/logfs/logfs.h | 1 -
fs/logfs/readwrite.c | 1 -
fs/logfs/segment.c | 1 -
fs/logfs/super.c | 23 +++++++++++++++--------
6 files changed, 31 insertions(+), 41 deletions(-)
diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c
index f602e230e1628..7811a2a359353 100644
--- a/fs/logfs/inode.c
+++ b/fs/logfs/inode.c
@@ -235,33 +235,21 @@ static struct inode *logfs_alloc_inode(struct super_block *sb)
* purpose is to create a new inode that will not trigger the warning if such
* an inode is still in use. An ugly hack, no doubt. Suggections for
* improvement are welcome.
+ *
+ * AV: that's what ->put_super() is for...
*/
struct inode *logfs_new_meta_inode(struct super_block *sb, u64 ino)
{
struct inode *inode;
- inode = logfs_alloc_inode(sb);
+ inode = new_inode(sb);
if (!inode)
return ERR_PTR(-ENOMEM);
inode->i_mode = S_IFREG;
inode->i_ino = ino;
- inode->i_sb = sb;
-
- /* This is a blatant copy of alloc_inode code. We'd need alloc_inode
- * to be nonstatic, alas. */
- {
- struct address_space * const mapping = &inode->i_data;
-
- mapping->a_ops = &logfs_reg_aops;
- mapping->host = inode;
- mapping->flags = 0;
- mapping_set_gfp_mask(mapping, GFP_NOFS);
- mapping->assoc_mapping = NULL;
- mapping->backing_dev_info = &default_backing_dev_info;
- inode->i_mapping = mapping;
- inode->i_nlink = 1;
- }
+ inode->i_data.a_ops = &logfs_reg_aops;
+ mapping_set_gfp_mask(&inode->i_data, GFP_NOFS);
return inode;
}
@@ -277,7 +265,7 @@ struct inode *logfs_read_meta_inode(struct super_block *sb, u64 ino)
err = logfs_read_inode(inode);
if (err) {
- destroy_meta_inode(inode);
+ iput(inode);
return ERR_PTR(err);
}
logfs_inode_setops(inode);
@@ -298,16 +286,6 @@ static int logfs_write_inode(struct inode *inode, struct writeback_control *wbc)
return ret;
}
-void destroy_meta_inode(struct inode *inode)
-{
- if (inode) {
- if (inode->i_data.nrpages)
- truncate_inode_pages(&inode->i_data, 0);
- logfs_clear_inode(inode);
- kmem_cache_free(logfs_inode_cache, logfs_inode(inode));
- }
-}
-
/* called with inode_lock held */
static void logfs_drop_inode(struct inode *inode)
{
@@ -384,12 +362,22 @@ static int logfs_sync_fs(struct super_block *sb, int wait)
return 0;
}
+static void logfs_put_super(struct super_block *sb)
+{
+ struct logfs_super *super = logfs_super(sb);
+ /* kill the meta-inodes */
+ iput(super->s_master_inode);
+ iput(super->s_segfile_inode);
+ iput(super->s_mapping_inode);
+}
+
const struct super_operations logfs_super_operations = {
.alloc_inode = logfs_alloc_inode,
.clear_inode = logfs_clear_inode,
.delete_inode = logfs_delete_inode,
.destroy_inode = logfs_destroy_inode,
.drop_inode = logfs_drop_inode,
+ .put_super = logfs_put_super,
.write_inode = logfs_write_inode,
.statfs = logfs_statfs,
.sync_fs = logfs_sync_fs,
diff --git a/fs/logfs/journal.c b/fs/logfs/journal.c
index 4b0e0616b357d..f46ee8b0e135e 100644
--- a/fs/logfs/journal.c
+++ b/fs/logfs/journal.c
@@ -889,8 +889,6 @@ void logfs_cleanup_journal(struct super_block *sb)
struct logfs_super *super = logfs_super(sb);
btree_grim_visitor32(&super->s_reserved_segments, 0, NULL);
- destroy_meta_inode(super->s_master_inode);
- super->s_master_inode = NULL;
kfree(super->s_compressed_je);
kfree(super->s_je);
diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h
index c838c4d721110..5e65171dad238 100644
--- a/fs/logfs/logfs.h
+++ b/fs/logfs/logfs.h
@@ -525,7 +525,6 @@ struct inode *logfs_new_meta_inode(struct super_block *sb, u64 ino);
struct inode *logfs_read_meta_inode(struct super_block *sb, u64 ino);
int logfs_init_inode_cache(void);
void logfs_destroy_inode_cache(void);
-void destroy_meta_inode(struct inode *inode);
void logfs_set_blocks(struct inode *inode, u64 no);
/* these logically belong into inode.c but actually reside in readwrite.c */
int logfs_read_inode(struct inode *inode);
diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c
index 0718d112a1a59..580d126d597de 100644
--- a/fs/logfs/readwrite.c
+++ b/fs/logfs/readwrite.c
@@ -2272,7 +2272,6 @@ void logfs_cleanup_rw(struct super_block *sb)
{
struct logfs_super *super = logfs_super(sb);
- destroy_meta_inode(super->s_segfile_inode);
logfs_mempool_destroy(super->s_block_pool);
logfs_mempool_destroy(super->s_shadow_pool);
}
diff --git a/fs/logfs/segment.c b/fs/logfs/segment.c
index a9657afb70ad1..9d5187353255d 100644
--- a/fs/logfs/segment.c
+++ b/fs/logfs/segment.c
@@ -929,5 +929,4 @@ void logfs_cleanup_areas(struct super_block *sb)
for_each_area(i)
free_area(super->s_area[i]);
free_area(super->s_journal_area);
- destroy_meta_inode(super->s_mapping_inode);
}
diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index d651e10a1e9c1..5336155c5d818 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -342,24 +342,27 @@ static int logfs_get_sb_final(struct super_block *sb, struct vfsmount *mnt)
goto fail;
}
+ /* at that point we know that ->put_super() will be called */
super->s_erase_page = alloc_pages(GFP_KERNEL, 0);
if (!super->s_erase_page)
- goto fail;
+ return -ENOMEM;
memset(page_address(super->s_erase_page), 0xFF, PAGE_SIZE);
/* FIXME: check for read-only mounts */
err = logfs_make_writeable(sb);
- if (err)
- goto fail1;
+ if (err) {
+ __free_page(super->s_erase_page);
+ return err;
+ }
log_super("LogFS: Finished mounting\n");
simple_set_mnt(mnt, sb);
return 0;
-fail1:
- __free_page(super->s_erase_page);
fail:
- iput(logfs_super(sb)->s_master_inode);
+ iput(super->s_master_inode);
+ iput(super->s_segfile_inode);
+ iput(super->s_mapping_inode);
return -EIO;
}
@@ -580,10 +583,14 @@ int logfs_get_sb_device(struct file_system_type *type, int flags,
sb->s_flags |= MS_ACTIVE;
err = logfs_get_sb_final(sb, mnt);
if (err)
- goto err1;
- return 0;
+ deactivate_locked_super(sb);
+ return err;
err1:
+ /* no ->s_root, no ->put_super() */
+ iput(super->s_master_inode);
+ iput(super->s_segfile_inode);
+ iput(super->s_mapping_inode);
deactivate_locked_super(sb);
return err;
err0:
--
GitLab
From 7da08fd17a6e42d80f0f3897a5cbd682e77bcdb4 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 13:11:34 -0400
Subject: [PATCH 615/863] convert logfs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/logfs/inode.c | 3 +--
fs/logfs/logfs.h | 3 +--
fs/logfs/readwrite.c | 61 +++++++++++++++++++++-----------------------
3 files changed, 31 insertions(+), 36 deletions(-)
diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c
index 7811a2a359353..78be674d95c88 100644
--- a/fs/logfs/inode.c
+++ b/fs/logfs/inode.c
@@ -373,9 +373,8 @@ static void logfs_put_super(struct super_block *sb)
const struct super_operations logfs_super_operations = {
.alloc_inode = logfs_alloc_inode,
- .clear_inode = logfs_clear_inode,
- .delete_inode = logfs_delete_inode,
.destroy_inode = logfs_destroy_inode,
+ .evict_inode = logfs_evict_inode,
.drop_inode = logfs_drop_inode,
.put_super = logfs_put_super,
.write_inode = logfs_write_inode,
diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h
index 5e65171dad238..5e3b720779516 100644
--- a/fs/logfs/logfs.h
+++ b/fs/logfs/logfs.h
@@ -529,8 +529,7 @@ void logfs_set_blocks(struct inode *inode, u64 no);
/* these logically belong into inode.c but actually reside in readwrite.c */
int logfs_read_inode(struct inode *inode);
int __logfs_write_inode(struct inode *inode, long flags);
-void logfs_delete_inode(struct inode *inode);
-void logfs_clear_inode(struct inode *inode);
+void logfs_evict_inode(struct inode *inode);
/* journal.c */
void logfs_write_anchor(struct super_block *sb);
diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c
index 580d126d597de..6127baf0e1884 100644
--- a/fs/logfs/readwrite.c
+++ b/fs/logfs/readwrite.c
@@ -1972,31 +1972,6 @@ static struct page *inode_to_page(struct inode *inode)
return page;
}
-/* Cheaper version of write_inode. All changes are concealed in
- * aliases, which are moved back. No write to the medium happens.
- */
-void logfs_clear_inode(struct inode *inode)
-{
- struct super_block *sb = inode->i_sb;
- struct logfs_inode *li = logfs_inode(inode);
- struct logfs_block *block = li->li_block;
- struct page *page;
-
- /* Only deleted files may be dirty at this point */
- BUG_ON(inode->i_state & I_DIRTY && inode->i_nlink);
- if (!block)
- return;
- if ((logfs_super(sb)->s_flags & LOGFS_SB_FLAG_SHUTDOWN)) {
- block->ops->free_block(inode->i_sb, block);
- return;
- }
-
- BUG_ON(inode->i_ino < LOGFS_RESERVED_INOS);
- page = inode_to_page(inode);
- BUG_ON(!page); /* FIXME: Use emergency page */
- logfs_put_write_page(page);
-}
-
static int do_write_inode(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
@@ -2164,18 +2139,40 @@ static int do_delete_inode(struct inode *inode)
* ZOMBIE inodes have already been deleted before and should remain dead,
* if it weren't for valid checking. No need to kill them again here.
*/
-void logfs_delete_inode(struct inode *inode)
+void logfs_evict_inode(struct inode *inode)
{
+ struct super_block *sb = inode->i_sb;
struct logfs_inode *li = logfs_inode(inode);
+ struct logfs_block *block = li->li_block;
+ struct page *page;
- if (!(li->li_flags & LOGFS_IF_ZOMBIE)) {
- li->li_flags |= LOGFS_IF_ZOMBIE;
- if (i_size_read(inode) > 0)
- logfs_truncate(inode, 0);
- do_delete_inode(inode);
+ if (!inode->i_nlink) {
+ if (!(li->li_flags & LOGFS_IF_ZOMBIE)) {
+ li->li_flags |= LOGFS_IF_ZOMBIE;
+ if (i_size_read(inode) > 0)
+ logfs_truncate(inode, 0);
+ do_delete_inode(inode);
+ }
}
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ end_writeback(inode);
+
+ /* Cheaper version of write_inode. All changes are concealed in
+ * aliases, which are moved back. No write to the medium happens.
+ */
+ /* Only deleted files may be dirty at this point */
+ BUG_ON(inode->i_state & I_DIRTY && inode->i_nlink);
+ if (!block)
+ return;
+ if ((logfs_super(sb)->s_flags & LOGFS_SB_FLAG_SHUTDOWN)) {
+ block->ops->free_block(inode->i_sb, block);
+ return;
+ }
+
+ BUG_ON(inode->i_ino < LOGFS_RESERVED_INOS);
+ page = inode_to_page(inode);
+ BUG_ON(!page); /* FIXME: Use emergency page */
+ logfs_put_write_page(page);
}
void btree_write_block(struct logfs_block *block)
--
GitLab
From 0930fcc1ee2f0a810b938bc283a3a262d7adccbb Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 13:16:22 -0400
Subject: [PATCH 616/863] convert ext4 to ->evict_inode()
pretty much brute-force...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ext4/ext4.h | 3 ++-
fs/ext4/ialloc.c | 2 +-
fs/ext4/inode.c | 11 ++++++++---
fs/ext4/super.c | 10 +++++-----
4 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 19a4de57128ad..6a0d52ca14341 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1571,7 +1571,8 @@ extern int ext4_write_inode(struct inode *, struct writeback_control *);
extern int ext4_setattr(struct dentry *, struct iattr *);
extern int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
-extern void ext4_delete_inode(struct inode *);
+extern void ext4_evict_inode(struct inode *);
+extern void ext4_clear_inode(struct inode *);
extern int ext4_sync_inode(handle_t *, struct inode *);
extern void ext4_dirty_inode(struct inode *);
extern int ext4_change_inode_journal_flag(struct inode *, int);
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 25c4b3173fd93..07e791a856da3 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -222,7 +222,7 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)
is_directory = S_ISDIR(inode->i_mode);
/* Do this BEFORE marking the inode not in use or returning an error */
- clear_inode(inode);
+ ext4_clear_inode(inode);
es = EXT4_SB(sb)->s_es;
if (ino < EXT4_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) {
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 1fb390359bc5f..c6d365f9c663b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -167,11 +167,16 @@ int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode,
/*
* Called at the last iput() if i_nlink is zero.
*/
-void ext4_delete_inode(struct inode *inode)
+void ext4_evict_inode(struct inode *inode)
{
handle_t *handle;
int err;
+ if (inode->i_nlink) {
+ truncate_inode_pages(&inode->i_data, 0);
+ goto no_delete;
+ }
+
if (!is_bad_inode(inode))
dquot_initialize(inode);
@@ -245,13 +250,13 @@ void ext4_delete_inode(struct inode *inode)
*/
if (ext4_mark_inode_dirty(handle, inode))
/* If that failed, just do the required in-core inode clear. */
- clear_inode(inode);
+ ext4_clear_inode(inode);
else
ext4_free_inode(handle, inode);
ext4_journal_stop(handle);
return;
no_delete:
- clear_inode(inode); /* We must guarantee clearing of inode... */
+ ext4_clear_inode(inode); /* We must guarantee clearing of inode... */
}
typedef struct {
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 4e8983a9811b2..f627a6a4c3176 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -813,8 +813,10 @@ static void destroy_inodecache(void)
kmem_cache_destroy(ext4_inode_cachep);
}
-static void ext4_clear_inode(struct inode *inode)
+void ext4_clear_inode(struct inode *inode)
{
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
dquot_drop(inode);
ext4_discard_preallocations(inode);
if (EXT4_JOURNAL(inode))
@@ -1100,14 +1102,13 @@ static const struct super_operations ext4_sops = {
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
- .delete_inode = ext4_delete_inode,
+ .evict_inode = ext4_evict_inode,
.put_super = ext4_put_super,
.sync_fs = ext4_sync_fs,
.freeze_fs = ext4_freeze,
.unfreeze_fs = ext4_unfreeze,
.statfs = ext4_statfs,
.remount_fs = ext4_remount,
- .clear_inode = ext4_clear_inode,
.show_options = ext4_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext4_quota_read,
@@ -1121,12 +1122,11 @@ static const struct super_operations ext4_nojournal_sops = {
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
- .delete_inode = ext4_delete_inode,
+ .evict_inode = ext4_evict_inode,
.write_super = ext4_write_super,
.put_super = ext4_put_super,
.statfs = ext4_statfs,
.remount_fs = ext4_remount,
- .clear_inode = ext4_clear_inode,
.show_options = ext4_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext4_quota_read,
--
GitLab
From 07958f9f5b9e8422c15368a1733a52ea99009896 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 13:20:09 -0400
Subject: [PATCH 617/863] ->delete_inode() is gone
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/inode.c | 2 --
include/linux/fs.h | 1 -
2 files changed, 3 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index 93e7a5ecbc264..7a1bea9cb8eed 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -335,8 +335,6 @@ static void evict(struct inode *inode, int delete)
if (op->evict_inode) {
op->evict_inode(inode);
- } else if (delete && op->delete_inode) {
- op->delete_inode(inode);
} else {
if (inode->i_data.nrpages)
truncate_inode_pages(&inode->i_data, 0);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3c23c1dcb1bd0..2b1254771e46b 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1564,7 +1564,6 @@ struct super_operations {
int (*write_inode) (struct inode *, struct writeback_control *wbc);
void (*drop_inode) (struct inode *);
void (*evict_inode) (struct inode *);
- void (*delete_inode) (struct inode *);
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
--
GitLab
From 644da5960ded137c339bc69bc2aeac54f73aad59 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 13:21:05 -0400
Subject: [PATCH 618/863] fs/inode.c:evict() doesn't care about delete vs.
non-delete paths now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index 7a1bea9cb8eed..8320bef7177e1 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -329,7 +329,7 @@ void clear_inode(struct inode *inode)
}
EXPORT_SYMBOL(clear_inode);
-static void evict(struct inode *inode, int delete)
+static void evict(struct inode *inode)
{
const struct super_operations *op = inode->i_sb->s_op;
@@ -363,7 +363,7 @@ static void dispose_list(struct list_head *head)
inode = list_first_entry(head, struct inode, i_list);
list_del(&inode->i_list);
- evict(inode, 0);
+ evict(inode);
spin_lock(&inode_lock);
hlist_del_init(&inode->i_hash);
@@ -1224,7 +1224,7 @@ void generic_delete_inode(struct inode *inode)
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
- evict(inode, 1);
+ evict(inode);
spin_lock(&inode_lock);
hlist_del_init(&inode->i_hash);
@@ -1279,7 +1279,7 @@ static void generic_forget_inode(struct inode *inode)
{
if (!generic_detach_inode(inode))
return;
- evict(inode, 0);
+ evict(inode);
wake_up_inode(inode);
destroy_inode(inode);
}
--
GitLab
From 30140837f256558c943636245ab90897a9455a70 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 13:23:20 -0400
Subject: [PATCH 619/863] fs/inode.c:clear_inode() is gone
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/inode.c | 28 ++++------------------------
include/linux/fs.h | 1 -
2 files changed, 4 insertions(+), 25 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index 8320bef7177e1..82ca3562a6882 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -306,29 +306,6 @@ void end_writeback(struct inode *inode)
}
EXPORT_SYMBOL(end_writeback);
-/**
- * clear_inode - clear an inode
- * @inode: inode to clear
- *
- * This is called by the filesystem to tell us
- * that the inode is no longer useful. We just
- * terminate it with extreme prejudice.
- */
-void clear_inode(struct inode *inode)
-{
- might_sleep();
- invalidate_inode_buffers(inode);
-
- BUG_ON(inode->i_data.nrpages);
- BUG_ON(!(inode->i_state & I_FREEING));
- BUG_ON(inode->i_state & I_CLEAR);
- inode_sync_wait(inode);
- if (inode->i_sb->s_op->clear_inode)
- inode->i_sb->s_op->clear_inode(inode);
- inode->i_state = I_FREEING | I_CLEAR;
-}
-EXPORT_SYMBOL(clear_inode);
-
static void evict(struct inode *inode)
{
const struct super_operations *op = inode->i_sb->s_op;
@@ -338,7 +315,10 @@ static void evict(struct inode *inode)
} else {
if (inode->i_data.nrpages)
truncate_inode_pages(&inode->i_data, 0);
- clear_inode(inode);
+ invalidate_inode_buffers(inode);
+ end_writeback(inode);
+ if (op->clear_inode)
+ op->clear_inode(inode);
}
if (S_ISBLK(inode->i_mode) && inode->i_bdev)
bd_forget(inode);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 2b1254771e46b..4eaa6b2e35db5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2182,7 +2182,6 @@ extern void unlock_new_inode(struct inode *);
extern void __iget(struct inode * inode);
extern void iget_failed(struct inode *);
-extern void clear_inode(struct inode *);
extern void end_writeback(struct inode *);
extern void destroy_inode(struct inode *);
extern void __destroy_inode(struct inode *);
--
GitLab
From 45321ac54316eaeeebde0b5f728a1791e500974c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 13:43:19 -0400
Subject: [PATCH 620/863] Make ->drop_inode() just return whether inode needs
to be dropped
... and let iput_final() do the actual eviction or retention
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
drivers/staging/pohmelfs/inode.c | 4 +-
fs/btrfs/ctree.h | 2 +-
fs/btrfs/inode.c | 11 +--
fs/cifs/cifsfs.c | 9 ++-
fs/gfs2/super.c | 4 +-
fs/inode.c | 113 ++++++++++---------------------
fs/logfs/inode.c | 4 +-
fs/ocfs2/inode.c | 8 ++-
fs/ocfs2/inode.h | 2 +-
include/linux/fs.h | 6 +-
10 files changed, 60 insertions(+), 103 deletions(-)
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index e818f53ccfd77..100e3a3c1b104 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1223,7 +1223,7 @@ void pohmelfs_fill_inode(struct inode *inode, struct netfs_inode_info *info)
}
}
-static void pohmelfs_drop_inode(struct inode *inode)
+static int pohmelfs_drop_inode(struct inode *inode)
{
struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
struct pohmelfs_inode *pi = POHMELFS_I(inode);
@@ -1232,7 +1232,7 @@ static void pohmelfs_drop_inode(struct inode *inode)
list_del_init(&pi->inode_entry);
spin_unlock(&psb->ino_lock);
- generic_drop_inode(inode);
+ return generic_drop_inode(inode);
}
static struct pohmelfs_inode *pohmelfs_get_inode_from_list(struct pohmelfs_sb *psb,
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 394d5422ab6a7..eaf286abad175 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2395,7 +2395,7 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc);
void btrfs_dirty_inode(struct inode *inode);
struct inode *btrfs_alloc_inode(struct super_block *sb);
void btrfs_destroy_inode(struct inode *inode);
-void btrfs_drop_inode(struct inode *inode);
+int btrfs_drop_inode(struct inode *inode);
int btrfs_init_cachep(void);
void btrfs_destroy_cachep(void);
long btrfs_ioctl_trans_end(struct file *file);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index ce02199ec4e54..2c54f04a0bf5e 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3943,7 +3943,7 @@ int btrfs_invalidate_inodes(struct btrfs_root *root)
if (atomic_read(&inode->i_count) > 1)
d_prune_aliases(inode);
/*
- * btrfs_drop_inode will remove it from
+ * btrfs_drop_inode will have it removed from
* the inode cache when its usage count
* hits zero.
*/
@@ -6337,13 +6337,14 @@ void btrfs_destroy_inode(struct inode *inode)
kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
}
-void btrfs_drop_inode(struct inode *inode)
+int btrfs_drop_inode(struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
- if (inode->i_nlink > 0 && btrfs_root_refs(&root->root_item) == 0)
- generic_delete_inode(inode);
+
+ if (btrfs_root_refs(&root->root_item) == 0)
+ return 1;
else
- generic_drop_inode(inode);
+ return generic_drop_inode(inode);
}
static void init_once(void *foo)
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 8a2cf129e535a..20914f5627ddf 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -480,14 +480,13 @@ static int cifs_remount(struct super_block *sb, int *flags, char *data)
return 0;
}
-void cifs_drop_inode(struct inode *inode)
+static int cifs_drop_inode(struct inode *inode)
{
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- return generic_drop_inode(inode);
-
- return generic_delete_inode(inode);
+ /* no serverino => unconditional eviction */
+ return !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) ||
+ generic_drop_inode(inode);
}
static const struct super_operations cifs_super_ops = {
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 555f5a417c679..fa865ab37f12d 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1191,7 +1191,7 @@ static int gfs2_remount_fs(struct super_block *sb, int *flags, char *data)
* node for later deallocation.
*/
-static void gfs2_drop_inode(struct inode *inode)
+static int gfs2_drop_inode(struct inode *inode)
{
struct gfs2_inode *ip = GFS2_I(inode);
@@ -1200,7 +1200,7 @@ static void gfs2_drop_inode(struct inode *inode)
if (gl && test_bit(GLF_DEMOTE, &gl->gl_flags))
clear_nlink(inode);
}
- generic_drop_inode(inode);
+ return generic_drop_inode(inode);
}
static int is_ancestor(const struct dentry *d1, const struct dentry *d2)
diff --git a/fs/inode.c b/fs/inode.c
index 82ca3562a6882..0e077619cbf68 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1183,58 +1183,51 @@ void remove_inode_hash(struct inode *inode)
}
EXPORT_SYMBOL(remove_inode_hash);
+int generic_delete_inode(struct inode *inode)
+{
+ return 1;
+}
+EXPORT_SYMBOL(generic_delete_inode);
+
/*
- * Tell the filesystem that this inode is no longer of any interest and should
- * be completely destroyed.
- *
- * We leave the inode in the inode hash table until *after* the filesystem's
- * ->delete_inode completes. This ensures that an iget (such as nfsd might
- * instigate) will always find up-to-date information either in the hash or on
- * disk.
- *
- * I_FREEING is set so that no-one will take a new reference to the inode while
- * it is being deleted.
+ * Normal UNIX filesystem behaviour: delete the
+ * inode when the usage count drops to zero, and
+ * i_nlink is zero.
*/
-void generic_delete_inode(struct inode *inode)
+int generic_drop_inode(struct inode *inode)
{
- list_del_init(&inode->i_list);
- list_del_init(&inode->i_sb_list);
- WARN_ON(inode->i_state & I_NEW);
- inode->i_state |= I_FREEING;
- inodes_stat.nr_inodes--;
- spin_unlock(&inode_lock);
-
- evict(inode);
-
- spin_lock(&inode_lock);
- hlist_del_init(&inode->i_hash);
- spin_unlock(&inode_lock);
- wake_up_inode(inode);
- BUG_ON(inode->i_state != (I_FREEING | I_CLEAR));
- destroy_inode(inode);
+ return !inode->i_nlink || hlist_unhashed(&inode->i_hash);
}
-EXPORT_SYMBOL(generic_delete_inode);
+EXPORT_SYMBOL_GPL(generic_drop_inode);
-/**
- * generic_detach_inode - remove inode from inode lists
- * @inode: inode to remove
- *
- * Remove inode from inode lists, write it if it's dirty. This is just an
- * internal VFS helper exported for hugetlbfs. Do not use!
+/*
+ * Called when we're dropping the last reference
+ * to an inode.
*
- * Returns 1 if inode should be completely destroyed.
+ * Call the FS "drop_inode()" function, defaulting to
+ * the legacy UNIX filesystem behaviour. If it tells
+ * us to evict inode, do so. Otherwise, retain inode
+ * in cache if fs is alive, sync and evict if fs is
+ * shutting down.
*/
-static int generic_detach_inode(struct inode *inode)
+static void iput_final(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
+ const struct super_operations *op = inode->i_sb->s_op;
+ int drop;
+
+ if (op && op->drop_inode)
+ drop = op->drop_inode(inode);
+ else
+ drop = generic_drop_inode(inode);
- if (!hlist_unhashed(&inode->i_hash)) {
+ if (!drop) {
if (!(inode->i_state & (I_DIRTY|I_SYNC)))
list_move(&inode->i_list, &inode_unused);
inodes_stat.nr_unused++;
if (sb->s_flags & MS_ACTIVE) {
spin_unlock(&inode_lock);
- return 0;
+ return;
}
WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_WILL_FREE;
@@ -1252,53 +1245,15 @@ static int generic_detach_inode(struct inode *inode)
inode->i_state |= I_FREEING;
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
- return 1;
-}
-
-static void generic_forget_inode(struct inode *inode)
-{
- if (!generic_detach_inode(inode))
- return;
evict(inode);
+ spin_lock(&inode_lock);
+ hlist_del_init(&inode->i_hash);
+ spin_unlock(&inode_lock);
wake_up_inode(inode);
+ BUG_ON(inode->i_state != (I_FREEING | I_CLEAR));
destroy_inode(inode);
}
-/*
- * Normal UNIX filesystem behaviour: delete the
- * inode when the usage count drops to zero, and
- * i_nlink is zero.
- */
-void generic_drop_inode(struct inode *inode)
-{
- if (!inode->i_nlink)
- generic_delete_inode(inode);
- else
- generic_forget_inode(inode);
-}
-EXPORT_SYMBOL_GPL(generic_drop_inode);
-
-/*
- * Called when we're dropping the last reference
- * to an inode.
- *
- * Call the FS "drop()" function, defaulting to
- * the legacy UNIX filesystem behaviour..
- *
- * NOTE! NOTE! NOTE! We're called with the inode lock
- * held, and the drop function is supposed to release
- * the lock!
- */
-static inline void iput_final(struct inode *inode)
-{
- const struct super_operations *op = inode->i_sb->s_op;
- void (*drop)(struct inode *) = generic_drop_inode;
-
- if (op && op->drop_inode)
- drop = op->drop_inode;
- drop(inode);
-}
-
/**
* iput - put an inode
* @inode: inode to put
diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c
index 78be674d95c88..d8c71ece098fb 100644
--- a/fs/logfs/inode.c
+++ b/fs/logfs/inode.c
@@ -287,7 +287,7 @@ static int logfs_write_inode(struct inode *inode, struct writeback_control *wbc)
}
/* called with inode_lock held */
-static void logfs_drop_inode(struct inode *inode)
+static int logfs_drop_inode(struct inode *inode)
{
struct logfs_super *super = logfs_super(inode->i_sb);
struct logfs_inode *li = logfs_inode(inode);
@@ -295,7 +295,7 @@ static void logfs_drop_inode(struct inode *inode)
spin_lock(&logfs_inode_lock);
list_move(&li->li_freeing_list, &super->s_freeing_list);
spin_unlock(&logfs_inode_lock);
- generic_drop_inode(inode);
+ return generic_drop_inode(inode);
}
static void logfs_set_ino_generation(struct super_block *sb,
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index eb7fd07c90f22..0492464916b19 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -1194,9 +1194,10 @@ void ocfs2_evict_inode(struct inode *inode)
/* Called under inode_lock, with no more references on the
* struct inode, so it's safe here to check the flags field
* and to manipulate i_nlink without any other locks. */
-void ocfs2_drop_inode(struct inode *inode)
+int ocfs2_drop_inode(struct inode *inode)
{
struct ocfs2_inode_info *oi = OCFS2_I(inode);
+ int res;
mlog_entry_void();
@@ -1204,11 +1205,12 @@ void ocfs2_drop_inode(struct inode *inode)
(unsigned long long)oi->ip_blkno, inode->i_nlink, oi->ip_flags);
if (oi->ip_flags & OCFS2_INODE_MAYBE_ORPHANED)
- generic_delete_inode(inode);
+ res = 1;
else
- generic_drop_inode(inode);
+ res = generic_drop_inode(inode);
mlog_exit_void();
+ return res;
}
/*
diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h
index 975eedd7b2432..6de5a869db300 100644
--- a/fs/ocfs2/inode.h
+++ b/fs/ocfs2/inode.h
@@ -124,7 +124,7 @@ static inline struct ocfs2_caching_info *INODE_CACHE(struct inode *inode)
}
void ocfs2_evict_inode(struct inode *inode);
-void ocfs2_drop_inode(struct inode *inode);
+int ocfs2_drop_inode(struct inode *inode);
/* Flags for ocfs2_iget() */
#define OCFS2_FI_FLAG_SYSFILE 0x1
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 4eaa6b2e35db5..8553adbda57b1 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1562,7 +1562,7 @@ struct super_operations {
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, struct writeback_control *wbc);
- void (*drop_inode) (struct inode *);
+ int (*drop_inode) (struct inode *);
void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
@@ -2164,8 +2164,8 @@ extern void iput(struct inode *);
extern struct inode * igrab(struct inode *);
extern ino_t iunique(struct super_block *, ino_t);
extern int inode_needs_sync(struct inode *inode);
-extern void generic_delete_inode(struct inode *inode);
-extern void generic_drop_inode(struct inode *inode);
+extern int generic_delete_inode(struct inode *inode);
+extern int generic_drop_inode(struct inode *inode);
extern struct inode *ilookup5_nowait(struct super_block *sb,
unsigned long hashval, int (*test)(struct inode *, void *),
--
GitLab
From b57922d97fd6f79b6dbe6db0c4fd30d219fa08c1 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 14:34:48 -0400
Subject: [PATCH 621/863] convert remaining ->clear_inode() to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/9p/v9fs_vfs.h | 2 +-
fs/9p/vfs_inode.c | 4 +++-
fs/9p/vfs_super.c | 4 ++--
fs/afs/inode.c | 5 ++++-
fs/afs/internal.h | 2 +-
fs/afs/super.c | 2 +-
fs/binfmt_misc.c | 5 +++--
fs/block_dev.c | 7 +++++--
fs/cifs/cifsfs.c | 6 ++++--
fs/coda/inode.c | 8 +++++---
fs/ecryptfs/super.c | 8 +++++---
fs/freevxfs/vxfs_extern.h | 2 +-
fs/freevxfs/vxfs_inode.c | 8 +++++---
fs/freevxfs/vxfs_super.c | 2 +-
fs/fuse/inode.c | 6 ++++--
fs/hfs/hfs_fs.h | 2 +-
fs/hfs/inode.c | 4 +++-
fs/hfs/super.c | 2 +-
fs/hfsplus/super.c | 8 +++++---
fs/inode.c | 2 --
fs/jffs2/fs.c | 6 ++++--
fs/jffs2/os-linux.h | 2 +-
fs/jffs2/super.c | 2 +-
fs/jffs2/xattr.c | 2 +-
fs/nfs/inode.c | 13 +++++++++++--
fs/nfs/internal.h | 4 ++--
fs/nfs/super.c | 4 ++--
fs/ntfs/inode.c | 7 +++++--
fs/ntfs/inode.h | 2 +-
fs/ntfs/super.c | 2 +-
fs/ocfs2/dlmfs/dlmfs.c | 7 +++----
fs/xfs/linux-2.6/xfs_super.c | 8 +++++---
fs/xfs/linux-2.6/xfs_trace.h | 2 +-
include/linux/fs.h | 3 +--
34 files changed, 94 insertions(+), 59 deletions(-)
diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h
index 32ef4009d0300..3d056fe01b508 100644
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -52,7 +52,7 @@ void v9fs_destroy_inode(struct inode *inode);
#endif
struct inode *v9fs_get_inode(struct super_block *sb, int mode);
-void v9fs_clear_inode(struct inode *inode);
+void v9fs_evict_inode(struct inode *inode);
ino_t v9fs_qid2ino(struct p9_qid *qid);
void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
int v9fs_dir_release(struct inode *inode, struct file *filp);
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 4b3ad6ac9a41d..b81ce206508d7 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -387,8 +387,10 @@ v9fs_clone_walk(struct v9fs_session_info *v9ses, u32 fid, struct dentry *dentry)
* @inode: inode to release
*
*/
-void v9fs_clear_inode(struct inode *inode)
+void v9fs_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(inode->i_mapping, 0);
+ end_writeback(inode);
filemap_fdatawrite(inode->i_mapping);
#ifdef CONFIG_9P_FSCACHE
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index be74d020436e2..c6122bf547df2 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -257,7 +257,7 @@ static const struct super_operations v9fs_super_ops = {
.destroy_inode = v9fs_destroy_inode,
#endif
.statfs = simple_statfs,
- .clear_inode = v9fs_clear_inode,
+ .evict_inode = v9fs_evict_inode,
.show_options = generic_show_options,
.umount_begin = v9fs_umount_begin,
};
@@ -268,7 +268,7 @@ static const struct super_operations v9fs_super_ops_dotl = {
.destroy_inode = v9fs_destroy_inode,
#endif
.statfs = v9fs_statfs,
- .clear_inode = v9fs_clear_inode,
+ .evict_inode = v9fs_evict_inode,
.show_options = generic_show_options,
.umount_begin = v9fs_umount_begin,
};
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index d00b312e31108..320ffef115746 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -316,7 +316,7 @@ int afs_getattr(struct vfsmount *mnt, struct dentry *dentry,
/*
* clear an AFS inode
*/
-void afs_clear_inode(struct inode *inode)
+void afs_evict_inode(struct inode *inode)
{
struct afs_permits *permits;
struct afs_vnode *vnode;
@@ -335,6 +335,9 @@ void afs_clear_inode(struct inode *inode)
ASSERTCMP(inode->i_ino, ==, vnode->fid.vnode);
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
+
afs_give_up_callback(vnode);
if (vnode->server) {
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 5f679b77ce24c..8679089ce9a13 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -565,7 +565,7 @@ extern void afs_zap_data(struct afs_vnode *);
extern int afs_validate(struct afs_vnode *, struct key *);
extern int afs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
extern int afs_setattr(struct dentry *, struct iattr *);
-extern void afs_clear_inode(struct inode *);
+extern void afs_evict_inode(struct inode *);
/*
* main.c
diff --git a/fs/afs/super.c b/fs/afs/super.c
index e932e5a3a0c1f..9cf80f02da16a 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -49,7 +49,7 @@ static const struct super_operations afs_super_ops = {
.statfs = afs_statfs,
.alloc_inode = afs_alloc_inode,
.destroy_inode = afs_destroy_inode,
- .clear_inode = afs_clear_inode,
+ .evict_inode = afs_evict_inode,
.put_super = afs_put_super,
.show_options = generic_show_options,
};
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index c4e83537ead77..9e60fd2017160 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -502,8 +502,9 @@ static struct inode *bm_get_inode(struct super_block *sb, int mode)
return inode;
}
-static void bm_clear_inode(struct inode *inode)
+static void bm_evict_inode(struct inode *inode)
{
+ end_writeback(inode);
kfree(inode->i_private);
}
@@ -685,7 +686,7 @@ static const struct file_operations bm_status_operations = {
static const struct super_operations s_ops = {
.statfs = simple_statfs,
- .clear_inode = bm_clear_inode,
+ .evict_inode = bm_evict_inode,
};
static int bm_fill_super(struct super_block * sb, void * data, int silent)
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 63c9d60762051..de7b4d0c7e308 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -426,10 +426,13 @@ static inline void __bd_forget(struct inode *inode)
inode->i_mapping = &inode->i_data;
}
-static void bdev_clear_inode(struct inode *inode)
+static void bdev_evict_inode(struct inode *inode)
{
struct block_device *bdev = &BDEV_I(inode)->bdev;
struct list_head *p;
+ truncate_inode_pages(&inode->i_data, 0);
+ invalidate_inode_buffers(inode); /* is it needed here? */
+ end_writeback(inode);
spin_lock(&bdev_lock);
while ( (p = bdev->bd_inodes.next) != &bdev->bd_inodes ) {
__bd_forget(list_entry(p, struct inode, i_devices));
@@ -443,7 +446,7 @@ static const struct super_operations bdev_sops = {
.alloc_inode = bdev_alloc_inode,
.destroy_inode = bdev_destroy_inode,
.drop_inode = generic_delete_inode,
- .clear_inode = bdev_clear_inode,
+ .evict_inode = bdev_evict_inode,
};
static int bd_get_sb(struct file_system_type *fs_type,
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 20914f5627ddf..5574a42b7bb6b 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -330,8 +330,10 @@ cifs_destroy_inode(struct inode *inode)
}
static void
-cifs_clear_inode(struct inode *inode)
+cifs_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
cifs_fscache_release_inode_cookie(inode);
}
@@ -495,7 +497,7 @@ static const struct super_operations cifs_super_ops = {
.alloc_inode = cifs_alloc_inode,
.destroy_inode = cifs_destroy_inode,
.drop_inode = cifs_drop_inode,
- .clear_inode = cifs_clear_inode,
+ .evict_inode = cifs_evict_inode,
/* .delete_inode = cifs_delete_inode, */ /* Do not need above
function unless later we add lazy close of inodes or unless the
kernel forgets to call us with the same number of releases (closes)
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index d97f9935a0285..6526e6f21ecfb 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -35,7 +35,7 @@
#include "coda_int.h"
/* VFS super_block ops */
-static void coda_clear_inode(struct inode *);
+static void coda_evict_inode(struct inode *);
static void coda_put_super(struct super_block *);
static int coda_statfs(struct dentry *dentry, struct kstatfs *buf);
@@ -93,7 +93,7 @@ static const struct super_operations coda_super_operations =
{
.alloc_inode = coda_alloc_inode,
.destroy_inode = coda_destroy_inode,
- .clear_inode = coda_clear_inode,
+ .evict_inode = coda_evict_inode,
.put_super = coda_put_super,
.statfs = coda_statfs,
.remount_fs = coda_remount,
@@ -224,8 +224,10 @@ static void coda_put_super(struct super_block *sb)
printk("Coda: Bye bye.\n");
}
-static void coda_clear_inode(struct inode *inode)
+static void coda_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
coda_cache_clear_inode(inode);
}
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index 0435886e4a9f4..4b5de6c6e0fa0 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -122,7 +122,7 @@ static int ecryptfs_statfs(struct dentry *dentry, struct kstatfs *buf)
}
/**
- * ecryptfs_clear_inode
+ * ecryptfs_evict_inode
* @inode - The ecryptfs inode
*
* Called by iput() when the inode reference count reached zero
@@ -131,8 +131,10 @@ static int ecryptfs_statfs(struct dentry *dentry, struct kstatfs *buf)
* on the inode free list. We use this to drop out reference to the
* lower inode.
*/
-static void ecryptfs_clear_inode(struct inode *inode)
+static void ecryptfs_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
iput(ecryptfs_inode_to_lower(inode));
}
@@ -184,6 +186,6 @@ const struct super_operations ecryptfs_sops = {
.drop_inode = generic_delete_inode,
.statfs = ecryptfs_statfs,
.remount_fs = NULL,
- .clear_inode = ecryptfs_clear_inode,
+ .evict_inode = ecryptfs_evict_inode,
.show_options = ecryptfs_show_options
};
diff --git a/fs/freevxfs/vxfs_extern.h b/fs/freevxfs/vxfs_extern.h
index 50ab5eecb99b8..881aa3d217f00 100644
--- a/fs/freevxfs/vxfs_extern.h
+++ b/fs/freevxfs/vxfs_extern.h
@@ -63,7 +63,7 @@ extern void vxfs_put_fake_inode(struct inode *);
extern struct vxfs_inode_info * vxfs_blkiget(struct super_block *, u_long, ino_t);
extern struct vxfs_inode_info * vxfs_stiget(struct super_block *, ino_t);
extern struct inode * vxfs_iget(struct super_block *, ino_t);
-extern void vxfs_clear_inode(struct inode *);
+extern void vxfs_evict_inode(struct inode *);
/* vxfs_lookup.c */
extern const struct inode_operations vxfs_dir_inode_ops;
diff --git a/fs/freevxfs/vxfs_inode.c b/fs/freevxfs/vxfs_inode.c
index 03a6ea5e99f77..79d1b4ea13e79 100644
--- a/fs/freevxfs/vxfs_inode.c
+++ b/fs/freevxfs/vxfs_inode.c
@@ -337,15 +337,17 @@ vxfs_iget(struct super_block *sbp, ino_t ino)
}
/**
- * vxfs_clear_inode - remove inode from main memory
+ * vxfs_evict_inode - remove inode from main memory
* @ip: inode to discard.
*
* Description:
- * vxfs_clear_inode() is called on the final iput and frees the private
+ * vxfs_evict_inode() is called on the final iput and frees the private
* inode area.
*/
void
-vxfs_clear_inode(struct inode *ip)
+vxfs_evict_inode(struct inode *ip)
{
+ truncate_inode_pages(&ip->i_data, 0);
+ end_writeback(ip);
kmem_cache_free(vxfs_inode_cachep, ip->i_private);
}
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index 1e8af939b3e4a..1f3ffd93b3579 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -61,7 +61,7 @@ static int vxfs_statfs(struct dentry *, struct kstatfs *);
static int vxfs_remount(struct super_block *, int *, char *);
static const struct super_operations vxfs_super_ops = {
- .clear_inode = vxfs_clear_inode,
+ .evict_inode = vxfs_evict_inode,
.put_super = vxfs_put_super,
.statfs = vxfs_statfs,
.remount_fs = vxfs_remount,
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index ec14d19ce5016..da9e6e11374c4 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -122,8 +122,10 @@ void fuse_send_forget(struct fuse_conn *fc, struct fuse_req *req,
fuse_request_send_noreply(fc, req);
}
-static void fuse_clear_inode(struct inode *inode)
+static void fuse_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (inode->i_sb->s_flags & MS_ACTIVE) {
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_inode *fi = get_fuse_inode(inode);
@@ -736,7 +738,7 @@ static const struct export_operations fuse_export_operations = {
static const struct super_operations fuse_super_operations = {
.alloc_inode = fuse_alloc_inode,
.destroy_inode = fuse_destroy_inode,
- .clear_inode = fuse_clear_inode,
+ .evict_inode = fuse_evict_inode,
.drop_inode = generic_delete_inode,
.remount_fs = fuse_remount_fs,
.put_super = fuse_put_super,
diff --git a/fs/hfs/hfs_fs.h b/fs/hfs/hfs_fs.h
index fe35e3b626c4b..4f55651aaa51e 100644
--- a/fs/hfs/hfs_fs.h
+++ b/fs/hfs/hfs_fs.h
@@ -193,7 +193,7 @@ extern int hfs_inode_setattr(struct dentry *, struct iattr *);
extern void hfs_inode_read_fork(struct inode *inode, struct hfs_extent *ext,
__be32 log_size, __be32 phys_size, u32 clump_size);
extern struct inode *hfs_iget(struct super_block *, struct hfs_cat_key *, hfs_cat_rec *);
-extern void hfs_clear_inode(struct inode *);
+extern void hfs_evict_inode(struct inode *);
extern void hfs_delete_inode(struct inode *);
/* attr.c */
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 93ceec8fbb8f0..397b7adc7ce66 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -531,8 +531,10 @@ static struct dentry *hfs_file_lookup(struct inode *dir, struct dentry *dentry,
return NULL;
}
-void hfs_clear_inode(struct inode *inode)
+void hfs_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (HFS_IS_RSRC(inode) && HFS_I(inode)->rsrc_inode) {
HFS_I(HFS_I(inode)->rsrc_inode)->rsrc_inode = NULL;
iput(HFS_I(inode)->rsrc_inode);
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 0a81eb7111f35..34235d4bf08bb 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -181,7 +181,7 @@ static const struct super_operations hfs_super_operations = {
.alloc_inode = hfs_alloc_inode,
.destroy_inode = hfs_destroy_inode,
.write_inode = hfs_write_inode,
- .clear_inode = hfs_clear_inode,
+ .evict_inode = hfs_evict_inode,
.put_super = hfs_put_super,
.write_super = hfs_write_super,
.sync_fs = hfs_sync_fs,
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index a32c241e4e456..3b55c050c7427 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -145,9 +145,11 @@ static int hfsplus_write_inode(struct inode *inode,
return ret;
}
-static void hfsplus_clear_inode(struct inode *inode)
+static void hfsplus_evict_inode(struct inode *inode)
{
- dprint(DBG_INODE, "hfsplus_clear_inode: %lu\n", inode->i_ino);
+ dprint(DBG_INODE, "hfsplus_evict_inode: %lu\n", inode->i_ino);
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
if (HFSPLUS_IS_RSRC(inode)) {
HFSPLUS_I(HFSPLUS_I(inode).rsrc_inode).rsrc_inode = NULL;
iput(HFSPLUS_I(inode).rsrc_inode);
@@ -293,7 +295,7 @@ static const struct super_operations hfsplus_sops = {
.alloc_inode = hfsplus_alloc_inode,
.destroy_inode = hfsplus_destroy_inode,
.write_inode = hfsplus_write_inode,
- .clear_inode = hfsplus_clear_inode,
+ .evict_inode = hfsplus_evict_inode,
.put_super = hfsplus_put_super,
.write_super = hfsplus_write_super,
.sync_fs = hfsplus_sync_fs,
diff --git a/fs/inode.c b/fs/inode.c
index 0e077619cbf68..5daeb0b8fb596 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -317,8 +317,6 @@ static void evict(struct inode *inode)
truncate_inode_pages(&inode->i_data, 0);
invalidate_inode_buffers(inode);
end_writeback(inode);
- if (op->clear_inode)
- op->clear_inode(inode);
}
if (S_ISBLK(inode->i_mode) && inode->i_bdev)
bd_forget(inode);
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 1b2426604fe3c..ac0638f049698 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -225,7 +225,7 @@ int jffs2_statfs(struct dentry *dentry, struct kstatfs *buf)
}
-void jffs2_clear_inode (struct inode *inode)
+void jffs2_evict_inode (struct inode *inode)
{
/* We can forget about this inode for now - drop all
* the nodelists associated with it, etc.
@@ -233,7 +233,9 @@ void jffs2_clear_inode (struct inode *inode)
struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
- D1(printk(KERN_DEBUG "jffs2_clear_inode(): ino #%lu mode %o\n", inode->i_ino, inode->i_mode));
+ D1(printk(KERN_DEBUG "jffs2_evict_inode(): ino #%lu mode %o\n", inode->i_ino, inode->i_mode));
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
jffs2_do_clear_inode(c, f);
}
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 4791aacf30849..00bae7cc2e48e 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -171,7 +171,7 @@ extern const struct inode_operations jffs2_symlink_inode_operations;
int jffs2_setattr (struct dentry *, struct iattr *);
int jffs2_do_setattr (struct inode *, struct iattr *);
struct inode *jffs2_iget(struct super_block *, unsigned long);
-void jffs2_clear_inode (struct inode *);
+void jffs2_evict_inode (struct inode *);
void jffs2_dirty_inode(struct inode *inode);
struct inode *jffs2_new_inode (struct inode *dir_i, int mode,
struct jffs2_raw_inode *ri);
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 511e2d609d129..662bba0995012 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -135,7 +135,7 @@ static const struct super_operations jffs2_super_operations =
.write_super = jffs2_write_super,
.statfs = jffs2_statfs,
.remount_fs = jffs2_remount_fs,
- .clear_inode = jffs2_clear_inode,
+ .evict_inode = jffs2_evict_inode,
.dirty_inode = jffs2_dirty_inode,
.sync_fs = jffs2_sync_fs,
};
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index d258e261bdc76..9b572ca40a492 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -588,7 +588,7 @@ static void delete_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *re
void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
{
- /* It's called from jffs2_clear_inode() on inode removing.
+ /* It's called from jffs2_evict_inode() on inode removing.
When an inode with XATTR is removed, those XATTRs must be removed. */
struct jffs2_xattr_ref *ref, *_ref;
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 099b3518feea6..c211b8168e5bf 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -98,7 +98,7 @@ u64 nfs_compat_user_ino64(u64 fileid)
return ino;
}
-void nfs_clear_inode(struct inode *inode)
+static void nfs_clear_inode(struct inode *inode)
{
/*
* The following should never happen...
@@ -110,6 +110,13 @@ void nfs_clear_inode(struct inode *inode)
nfs_fscache_release_inode_cookie(inode);
}
+void nfs_evict_inode(struct inode *inode)
+{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
+ nfs_clear_inode(inode);
+}
+
/**
* nfs_sync_mapping - helper to flush all mmapped dirty data to disk
*/
@@ -1338,8 +1345,10 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr)
* to open() calls that passed nfs_atomic_lookup, but failed to call
* nfs_open().
*/
-void nfs4_clear_inode(struct inode *inode)
+void nfs4_evict_inode(struct inode *inode)
{
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
/* If we are holding a delegation, return it! */
nfs_inode_return_delegation_noreclaim(inode);
/* First call standard NFS clear_inode() code */
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index e70f44b9b3f43..f168ebdf7c6d7 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -213,9 +213,9 @@ extern struct workqueue_struct *nfsiod_workqueue;
extern struct inode *nfs_alloc_inode(struct super_block *sb);
extern void nfs_destroy_inode(struct inode *);
extern int nfs_write_inode(struct inode *, struct writeback_control *);
-extern void nfs_clear_inode(struct inode *);
+extern void nfs_evict_inode(struct inode *);
#ifdef CONFIG_NFS_V4
-extern void nfs4_clear_inode(struct inode *);
+extern void nfs4_evict_inode(struct inode *);
#endif
void nfs_zap_acl_cache(struct inode *inode);
extern int nfs_wait_bit_killable(void *word);
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index f9df16de4a56b..ef2b7e468a7e0 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -270,7 +270,7 @@ static const struct super_operations nfs_sops = {
.write_inode = nfs_write_inode,
.put_super = nfs_put_super,
.statfs = nfs_statfs,
- .clear_inode = nfs_clear_inode,
+ .evict_inode = nfs_evict_inode,
.umount_begin = nfs_umount_begin,
.show_options = nfs_show_options,
.show_stats = nfs_show_stats,
@@ -340,7 +340,7 @@ static const struct super_operations nfs4_sops = {
.write_inode = nfs_write_inode,
.put_super = nfs_put_super,
.statfs = nfs_statfs,
- .clear_inode = nfs4_clear_inode,
+ .evict_inode = nfs4_evict_inode,
.umount_begin = nfs_umount_begin,
.show_options = nfs_show_options,
.show_stats = nfs_show_stats,
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index fdef8f729c3ad..93622b175fc7f 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -2238,7 +2238,7 @@ void ntfs_clear_extent_inode(ntfs_inode *ni)
}
/**
- * ntfs_clear_big_inode - clean up the ntfs specific part of an inode
+ * ntfs_evict_big_inode - clean up the ntfs specific part of an inode
* @vi: vfs inode pending annihilation
*
* When the VFS is going to remove an inode from memory, ntfs_clear_big_inode()
@@ -2247,10 +2247,13 @@ void ntfs_clear_extent_inode(ntfs_inode *ni)
*
* If the MFT record is dirty, we commit it before doing anything else.
*/
-void ntfs_clear_big_inode(struct inode *vi)
+void ntfs_evict_big_inode(struct inode *vi)
{
ntfs_inode *ni = NTFS_I(vi);
+ truncate_inode_pages(&vi->i_data, 0);
+ end_writeback(vi);
+
#ifdef NTFS_RW
if (NInoDirty(ni)) {
bool was_bad = (is_bad_inode(vi));
diff --git a/fs/ntfs/inode.h b/fs/ntfs/inode.h
index 9a113544605d5..2dabf813456ca 100644
--- a/fs/ntfs/inode.h
+++ b/fs/ntfs/inode.h
@@ -279,7 +279,7 @@ extern struct inode *ntfs_index_iget(struct inode *base_vi, ntfschar *name,
extern struct inode *ntfs_alloc_big_inode(struct super_block *sb);
extern void ntfs_destroy_big_inode(struct inode *inode);
-extern void ntfs_clear_big_inode(struct inode *vi);
+extern void ntfs_evict_big_inode(struct inode *vi);
extern void __ntfs_init_inode(struct super_block *sb, ntfs_inode *ni);
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 0de1db6cddbfe..512806171bfa2 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -2700,7 +2700,7 @@ static const struct super_operations ntfs_sops = {
.put_super = ntfs_put_super, /* Syscall: umount. */
.statfs = ntfs_statfs, /* Syscall: statfs */
.remount_fs = ntfs_remount, /* Syscall: mount -o remount. */
- .clear_inode = ntfs_clear_big_inode, /* VFS: Called when an inode is
+ .evict_inode = ntfs_evict_big_inode, /* VFS: Called when an inode is
removed from memory. */
//.umount_begin = NULL, /* Forced umount. */
.show_options = ntfs_show_options, /* Show mount options in
diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c
index 85e4ccaedd1f3..a43ebb11ad3b9 100644
--- a/fs/ocfs2/dlmfs/dlmfs.c
+++ b/fs/ocfs2/dlmfs/dlmfs.c
@@ -357,13 +357,12 @@ static void dlmfs_destroy_inode(struct inode *inode)
kmem_cache_free(dlmfs_inode_cache, DLMFS_I(inode));
}
-static void dlmfs_clear_inode(struct inode *inode)
+static void dlmfs_evict_inode(struct inode *inode)
{
int status;
struct dlmfs_inode_private *ip;
- if (!inode)
- return;
+ end_writeback(inode);
mlog(0, "inode %lu\n", inode->i_ino);
@@ -633,7 +632,7 @@ static const struct super_operations dlmfs_ops = {
.statfs = simple_statfs,
.alloc_inode = dlmfs_alloc_inode,
.destroy_inode = dlmfs_destroy_inode,
- .clear_inode = dlmfs_clear_inode,
+ .evict_inode = dlmfs_evict_inode,
.drop_inode = generic_delete_inode,
};
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 758df94690edc..15c35b62ff14b 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1100,13 +1100,15 @@ xfs_fs_write_inode(
}
STATIC void
-xfs_fs_clear_inode(
+xfs_fs_evict_inode(
struct inode *inode)
{
xfs_inode_t *ip = XFS_I(inode);
- trace_xfs_clear_inode(ip);
+ trace_xfs_evict_inode(ip);
+ truncate_inode_pages(&inode->i_data, 0);
+ end_writeback(inode);
XFS_STATS_INC(vn_rele);
XFS_STATS_INC(vn_remove);
XFS_STATS_DEC(vn_active);
@@ -1622,7 +1624,7 @@ static const struct super_operations xfs_super_operations = {
.destroy_inode = xfs_fs_destroy_inode,
.dirty_inode = xfs_fs_dirty_inode,
.write_inode = xfs_fs_write_inode,
- .clear_inode = xfs_fs_clear_inode,
+ .evict_inode = xfs_fs_evict_inode,
.put_super = xfs_fs_put_super,
.sync_fs = xfs_fs_sync_fs,
.freeze_fs = xfs_fs_freeze,
diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h
index c657cdca2cd26..be5dffd282a10 100644
--- a/fs/xfs/linux-2.6/xfs_trace.h
+++ b/fs/xfs/linux-2.6/xfs_trace.h
@@ -581,7 +581,7 @@ DEFINE_INODE_EVENT(xfs_ioctl_setattr);
DEFINE_INODE_EVENT(xfs_file_fsync);
DEFINE_INODE_EVENT(xfs_destroy_inode);
DEFINE_INODE_EVENT(xfs_write_inode);
-DEFINE_INODE_EVENT(xfs_clear_inode);
+DEFINE_INODE_EVENT(xfs_evict_inode);
DEFINE_INODE_EVENT(xfs_dquot_dqalloc);
DEFINE_INODE_EVENT(xfs_dquot_dqdetach);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 8553adbda57b1..dec9ac5988590 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1571,7 +1571,6 @@ struct super_operations {
int (*unfreeze_fs) (struct super_block *);
int (*statfs) (struct dentry *, struct kstatfs *);
int (*remount_fs) (struct super_block *, int *, char *);
- void (*clear_inode) (struct inode *);
void (*umount_begin) (struct super_block *);
int (*show_options)(struct seq_file *, struct vfsmount *);
@@ -1616,7 +1615,7 @@ struct super_operations {
* I_FREEING Set when inode is about to be freed but still has dirty
* pages or buffers attached or the inode itself is still
* dirty.
- * I_CLEAR Added by clear_inode(). In this state the inode is clean
+ * I_CLEAR Added by end_writeback(). In this state the inode is clean
* and can be destroyed. Inode keeps I_FREEING.
*
* Inodes that are I_WILL_FREE, I_FREEING or I_CLEAR are
--
GitLab
From b70a3e0702dee2ed9435e06a8bde7d9fa2228895 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 7 Jun 2010 14:35:46 -0400
Subject: [PATCH 622/863] All filesystems that need invalidate_inode_buffers()
are doing that explicitly
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/inode.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/fs/inode.c b/fs/inode.c
index 5daeb0b8fb596..2575244640a82 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -315,7 +315,6 @@ static void evict(struct inode *inode)
} else {
if (inode->i_data.nrpages)
truncate_inode_pages(&inode->i_data, 0);
- invalidate_inode_buffers(inode);
end_writeback(inode);
}
if (S_ISBLK(inode->i_mode) && inode->i_bdev)
--
GitLab
From 336fb3b97b78edc65bae0b223b83bf676cfe29e2 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 8 Jun 2010 00:37:12 -0400
Subject: [PATCH 623/863] update VFS documentation for method changes.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
Documentation/filesystems/Locking | 22 ++++++++++++----------
Documentation/filesystems/porting | 27 +++++++++++++++++++++++++++
2 files changed, 39 insertions(+), 10 deletions(-)
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 96d4293607ecf..bbcc15651a21c 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -92,8 +92,8 @@ prototypes:
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
- void (*drop_inode) (struct inode *);
- void (*delete_inode) (struct inode *);
+ int (*drop_inode) (struct inode *);
+ void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
@@ -101,14 +101,13 @@ prototypes:
int (*unfreeze_fs) (struct super_block *);
int (*statfs) (struct dentry *, struct kstatfs *);
int (*remount_fs) (struct super_block *, int *, char *);
- void (*clear_inode) (struct inode *);
void (*umount_begin) (struct super_block *);
int (*show_options)(struct seq_file *, struct vfsmount *);
ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
locking rules:
- All may block.
+ All may block [not true, see below]
None have BKL
s_umount
alloc_inode:
@@ -116,22 +115,25 @@ destroy_inode:
dirty_inode: (must not sleep)
write_inode:
drop_inode: !!!inode_lock!!!
-delete_inode:
+evict_inode:
put_super: write
write_super: read
sync_fs: read
freeze_fs: read
unfreeze_fs: read
-statfs: no
-remount_fs: maybe (see below)
-clear_inode:
+statfs: maybe(read) (see below)
+remount_fs: write
umount_begin: no
show_options: no (namespace_sem)
quota_read: no (see below)
quota_write: no (see below)
-->remount_fs() will have the s_umount exclusive lock if it's already mounted.
-When called from get_sb_single, it does NOT have the s_umount lock.
+->statfs() has s_umount (shared) when called by ustat(2) (native or
+compat), but that's an accident of bad API; s_umount is used to pin
+the superblock down when we only have dev_t given us by userland to
+identify the superblock. Everything else (statfs(), fstatfs(), etc.)
+doesn't hold it when calling ->statfs() - superblock is pinned down
+by resolving the pathname passed to syscall.
->quota_read() and ->quota_write() functions are both guaranteed to
be the only ones operating on the quota file by the quota code (via
dqio_sem) (unless an admin really wants to screw up something and
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index f9547a5c187bd..b12c89538680a 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -291,3 +291,30 @@ be in order of zeroing blocks using block_truncate_page or similar helpers,
size update and on finally on-disk truncation which should not fail.
inode_change_ok now includes the size checks for ATTR_SIZE and must be called
in the beginning of ->setattr unconditionally.
+
+[mandatory]
+
+ ->clear_inode() and ->delete_inode() are gone; ->evict_inode() should
+be used instead. It gets called whenever the inode is evicted, whether it has
+remaining links or not. Caller does *not* evict the pagecache or inode-associated
+metadata buffers; getting rid of those is responsibility of method, as it had
+been for ->delete_inode().
+ ->drop_inode() returns int now; it's called on final iput() with inode_lock
+held and it returns true if filesystems wants the inode to be dropped. As before,
+generic_drop_inode() is still the default and it's been updated appropriately.
+generic_delete_inode() is also alive and it consists simply of return 1. Note that
+all actual eviction work is done by caller after ->drop_inode() returns.
+ clear_inode() is gone; use end_writeback() instead. As before, it must
+be called exactly once on each call of ->evict_inode() (as it used to be for
+each call of ->delete_inode()). Unlike before, if you are using inode-associated
+metadata buffers (i.e. mark_buffer_dirty_inode()), it's your responsibility to
+call invalidate_inode_buffers() before end_writeback().
+ No async writeback (and thus no calls of ->write_inode()) will happen
+after end_writeback() returns, so actions that should not overlap with ->write_inode()
+(e.g. freeing on-disk inode if i_nlink is 0) ought to be done after that call.
+
+ NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out
+if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput()
+may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly
+free the on-disk inode, you may end up doing that while ->write_inode() is writing
+to it.
--
GitLab
From ebabe9a9001af0af56c0c2780ca1576246e7a74b Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 7 Jul 2010 18:53:11 +0200
Subject: [PATCH 624/863] pass a struct path to vfs_statfs
We'll need the path to implement the flags field for statvfs support.
We do have it available in all callers except:
- ecryptfs_statfs. This one doesn't actually need vfs_statfs but just
needs to do a caller to the lower filesystem statfs method.
- sys_ustat. Add a non-exported statfs_by_dentry helper for it which
doesn't won't be able to fill out the flags field later on.
In addition rename the helpers for statfs vs fstatfs to do_*statfs instead
of the misleading vfs prefix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
arch/alpha/kernel/osf_sys.c | 8 +++---
arch/parisc/hpux/sys_hpux.c | 10 ++++----
fs/cachefiles/bind.c | 2 +-
fs/cachefiles/daemon.c | 6 ++++-
fs/compat.c | 10 ++++----
fs/ecryptfs/super.c | 6 ++++-
fs/nfsd/nfs4xdr.c | 6 ++++-
fs/nfsd/vfs.c | 10 ++++++--
fs/statfs.c | 50 +++++++++++++++++++------------------
include/linux/fs.h | 3 ++-
kernel/acct.c | 2 +-
11 files changed, 67 insertions(+), 46 deletions(-)
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index de9d397178085..88131c6e42e3f 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -234,11 +234,11 @@ linux_to_osf_statfs(struct kstatfs *linux_stat, struct osf_statfs __user *osf_st
}
static int
-do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
+do_osf_statfs(struct path *path, struct osf_statfs __user *buffer,
unsigned long bufsiz)
{
struct kstatfs linux_stat;
- int error = vfs_statfs(dentry, &linux_stat);
+ int error = vfs_statfs(path, &linux_stat);
if (!error)
error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
return error;
@@ -252,7 +252,7 @@ SYSCALL_DEFINE3(osf_statfs, char __user *, pathname,
retval = user_path(pathname, &path);
if (!retval) {
- retval = do_osf_statfs(path.dentry, buffer, bufsiz);
+ retval = do_osf_statfs(&path buffer, bufsiz);
path_put(&path);
}
return retval;
@@ -267,7 +267,7 @@ SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd,
retval = -EBADF;
file = fget(fd);
if (file) {
- retval = do_osf_statfs(file->f_path.dentry, buffer, bufsiz);
+ retval = do_osf_statfs(&file->f_path, buffer, bufsiz);
fput(file);
}
return retval;
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 92343bd35fa30..ba430a03bc7a5 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -145,7 +145,7 @@ static int hpux_ustat(dev_t dev, struct hpux_ustat __user *ubuf)
s = user_get_super(dev);
if (s == NULL)
goto out;
- err = vfs_statfs(s->s_root, &sbuf);
+ err = statfs_by_dentry(s->s_root, &sbuf);
drop_super(s);
if (err)
goto out;
@@ -186,12 +186,12 @@ struct hpux_statfs {
int16_t f_pad;
};
-static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf)
+static int do_statfs_hpux(struct path *path, struct hpux_statfs *buf)
{
struct kstatfs st;
int retval;
- retval = vfs_statfs(dentry, &st);
+ retval = vfs_statfs(path, &st);
if (retval)
return retval;
@@ -219,7 +219,7 @@ asmlinkage long hpux_statfs(const char __user *pathname,
error = user_path(pathname, &path);
if (!error) {
struct hpux_statfs tmp;
- error = vfs_statfs_hpux(path.dentry, &tmp);
+ error = do_statfs_hpux(&path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
path_put(&path);
@@ -237,7 +237,7 @@ asmlinkage long hpux_fstatfs(unsigned int fd, struct hpux_statfs __user * buf)
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs_hpux(file->f_path.dentry, &tmp);
+ error = do_statfs_hpux(&file->f_path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
diff --git a/fs/cachefiles/bind.c b/fs/cachefiles/bind.c
index 2906077ac798a..a2603e7c0bb5b 100644
--- a/fs/cachefiles/bind.c
+++ b/fs/cachefiles/bind.c
@@ -146,7 +146,7 @@ static int cachefiles_daemon_add_cache(struct cachefiles_cache *cache)
goto error_unsupported;
/* get the cache size and blocksize */
- ret = vfs_statfs(root, &stats);
+ ret = vfs_statfs(&path, &stats);
if (ret < 0)
goto error_unsupported;
diff --git a/fs/cachefiles/daemon.c b/fs/cachefiles/daemon.c
index c2413561ea753..24eb0d37241a1 100644
--- a/fs/cachefiles/daemon.c
+++ b/fs/cachefiles/daemon.c
@@ -683,6 +683,10 @@ int cachefiles_has_space(struct cachefiles_cache *cache,
unsigned fnr, unsigned bnr)
{
struct kstatfs stats;
+ struct path path = {
+ .mnt = cache->mnt,
+ .dentry = cache->mnt->mnt_root,
+ };
int ret;
//_enter("{%llu,%llu,%llu,%llu,%llu,%llu},%u,%u",
@@ -697,7 +701,7 @@ int cachefiles_has_space(struct cachefiles_cache *cache,
/* find out how many pages of blockdev are available */
memset(&stats, 0, sizeof(stats));
- ret = vfs_statfs(cache->mnt->mnt_root, &stats);
+ ret = vfs_statfs(&path, &stats);
if (ret < 0) {
if (ret == -EIO)
cachefiles_io_error(cache, "statfs failed");
diff --git a/fs/compat.c b/fs/compat.c
index 6490d2134ff3e..fc6c2adf2f6b5 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -266,7 +266,7 @@ asmlinkage long compat_sys_statfs(const char __user *pathname, struct compat_sta
error = user_path(pathname, &path);
if (!error) {
struct kstatfs tmp;
- error = vfs_statfs(path.dentry, &tmp);
+ error = vfs_statfs(&path, &tmp);
if (!error)
error = put_compat_statfs(buf, &tmp);
path_put(&path);
@@ -284,7 +284,7 @@ asmlinkage long compat_sys_fstatfs(unsigned int fd, struct compat_statfs __user
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs(file->f_path.dentry, &tmp);
+ error = vfs_statfs(&file->f_path, &tmp);
if (!error)
error = put_compat_statfs(buf, &tmp);
fput(file);
@@ -334,7 +334,7 @@ asmlinkage long compat_sys_statfs64(const char __user *pathname, compat_size_t s
error = user_path(pathname, &path);
if (!error) {
struct kstatfs tmp;
- error = vfs_statfs(path.dentry, &tmp);
+ error = vfs_statfs(&path, &tmp);
if (!error)
error = put_compat_statfs64(buf, &tmp);
path_put(&path);
@@ -355,7 +355,7 @@ asmlinkage long compat_sys_fstatfs64(unsigned int fd, compat_size_t sz, struct c
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs(file->f_path.dentry, &tmp);
+ error = vfs_statfs(&file->f_path, &tmp);
if (!error)
error = put_compat_statfs64(buf, &tmp);
fput(file);
@@ -378,7 +378,7 @@ asmlinkage long compat_sys_ustat(unsigned dev, struct compat_ustat __user *u)
sb = user_get_super(new_decode_dev(dev));
if (!sb)
return -EINVAL;
- err = vfs_statfs(sb->s_root, &sbuf);
+ err = statfs_by_dentry(sb->s_root, &sbuf);
drop_super(sb);
if (err)
return err;
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index 4b5de6c6e0fa0..f7fc286a3aa9a 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -118,7 +118,11 @@ void ecryptfs_init_inode(struct inode *inode, struct inode *lower_inode)
*/
static int ecryptfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
- return vfs_statfs(ecryptfs_dentry_to_lower(dentry), buf);
+ struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+
+ if (!lower_dentry->d_sb->s_op->statfs)
+ return -ENOSYS;
+ return lower_dentry->d_sb->s_op->statfs(lower_dentry, buf);
}
/**
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index ac17a70802399..4d6154f66e04c 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -1756,6 +1756,10 @@ nfsd4_encode_fattr(struct svc_fh *fhp, struct svc_export *exp,
struct nfs4_acl *acl = NULL;
struct nfsd4_compoundres *resp = rqstp->rq_resp;
u32 minorversion = resp->cstate.minorversion;
+ struct path path = {
+ .mnt = exp->ex_path.mnt,
+ .dentry = dentry,
+ };
BUG_ON(bmval1 & NFSD_WRITEONLY_ATTRS_WORD1);
BUG_ON(bmval0 & ~nfsd_suppattrs0(minorversion));
@@ -1776,7 +1780,7 @@ nfsd4_encode_fattr(struct svc_fh *fhp, struct svc_export *exp,
FATTR4_WORD0_MAXNAME)) ||
(bmval1 & (FATTR4_WORD1_SPACE_AVAIL | FATTR4_WORD1_SPACE_FREE |
FATTR4_WORD1_SPACE_TOTAL))) {
- err = vfs_statfs(dentry, &statfs);
+ err = vfs_statfs(&path, &statfs);
if (err)
goto out_nfserr;
}
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 3c111120b619f..f6f1a718642fa 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -2019,8 +2019,14 @@ nfsd_readdir(struct svc_rqst *rqstp, struct svc_fh *fhp, loff_t *offsetp,
__be32
nfsd_statfs(struct svc_rqst *rqstp, struct svc_fh *fhp, struct kstatfs *stat, int access)
{
- __be32 err = fh_verify(rqstp, fhp, 0, NFSD_MAY_NOP | access);
- if (!err && vfs_statfs(fhp->fh_dentry,stat))
+ struct path path = {
+ .mnt = fhp->fh_export->ex_path.mnt,
+ .dentry = fhp->fh_dentry,
+ };
+ __be32 err;
+
+ err = fh_verify(rqstp, fhp, 0, NFSD_MAY_NOP | access);
+ if (!err && vfs_statfs(&path, stat))
err = nfserr_io;
return err;
}
diff --git a/fs/statfs.c b/fs/statfs.c
index 4ef021f3b6120..6a305709a4da9 100644
--- a/fs/statfs.c
+++ b/fs/statfs.c
@@ -7,33 +7,35 @@
#include <linux/security.h>
#include <linux/uaccess.h>
-int vfs_statfs(struct dentry *dentry, struct kstatfs *buf)
+int statfs_by_dentry(struct dentry *dentry, struct kstatfs *buf)
{
- int retval = -ENODEV;
-
- if (dentry) {
- retval = -ENOSYS;
- if (dentry->d_sb->s_op->statfs) {
- memset(buf, 0, sizeof(*buf));
- retval = security_sb_statfs(dentry);
- if (retval)
- return retval;
- retval = dentry->d_sb->s_op->statfs(dentry, buf);
- if (retval == 0 && buf->f_frsize == 0)
- buf->f_frsize = buf->f_bsize;
- }
- }
+ int retval;
+
+ if (!dentry->d_sb->s_op->statfs)
+ return -ENOSYS;
+
+ memset(buf, 0, sizeof(*buf));
+ retval = security_sb_statfs(dentry);
+ if (retval)
+ return retval;
+ retval = dentry->d_sb->s_op->statfs(dentry, buf);
+ if (retval == 0 && buf->f_frsize == 0)
+ buf->f_frsize = buf->f_bsize;
return retval;
}
+int vfs_statfs(struct path *path, struct kstatfs *buf)
+{
+ return statfs_by_dentry(path->dentry, buf);
+}
EXPORT_SYMBOL(vfs_statfs);
-static int vfs_statfs_native(struct dentry *dentry, struct statfs *buf)
+static int do_statfs_native(struct path *path, struct statfs *buf)
{
struct kstatfs st;
int retval;
- retval = vfs_statfs(dentry, &st);
+ retval = vfs_statfs(path, &st);
if (retval)
return retval;
@@ -72,12 +74,12 @@ static int vfs_statfs_native(struct dentry *dentry, struct statfs *buf)
return 0;
}
-static int vfs_statfs64(struct dentry *dentry, struct statfs64 *buf)
+static int do_statfs64(struct path *path, struct statfs64 *buf)
{
struct kstatfs st;
int retval;
- retval = vfs_statfs(dentry, &st);
+ retval = vfs_statfs(path, &st);
if (retval)
return retval;
@@ -107,7 +109,7 @@ SYSCALL_DEFINE2(statfs, const char __user *, pathname, struct statfs __user *, b
error = user_path(pathname, &path);
if (!error) {
struct statfs tmp;
- error = vfs_statfs_native(path.dentry, &tmp);
+ error = do_statfs_native(&path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
path_put(&path);
@@ -125,7 +127,7 @@ SYSCALL_DEFINE3(statfs64, const char __user *, pathname, size_t, sz, struct stat
error = user_path(pathname, &path);
if (!error) {
struct statfs64 tmp;
- error = vfs_statfs64(path.dentry, &tmp);
+ error = do_statfs64(&path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
path_put(&path);
@@ -143,7 +145,7 @@ SYSCALL_DEFINE2(fstatfs, unsigned int, fd, struct statfs __user *, buf)
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs_native(file->f_path.dentry, &tmp);
+ error = do_statfs_native(&file->f_path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
@@ -164,7 +166,7 @@ SYSCALL_DEFINE3(fstatfs64, unsigned int, fd, size_t, sz, struct statfs64 __user
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs64(file->f_path.dentry, &tmp);
+ error = do_statfs64(&file->f_path, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
@@ -183,7 +185,7 @@ SYSCALL_DEFINE2(ustat, unsigned, dev, struct ustat __user *, ubuf)
if (!s)
return -EINVAL;
- err = vfs_statfs(s->s_root, &sbuf);
+ err = statfs_by_dentry(s->s_root, &sbuf);
drop_super(s);
if (err)
return err;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index dec9ac5988590..9bedf4219f838 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1813,7 +1813,8 @@ extern struct vfsmount *collect_mounts(struct path *);
extern void drop_collected_mounts(struct vfsmount *);
extern int iterate_mounts(int (*)(struct vfsmount *, void *), void *,
struct vfsmount *);
-extern int vfs_statfs(struct dentry *, struct kstatfs *);
+extern int vfs_statfs(struct path *, struct kstatfs *);
+extern int statfs_by_dentry(struct dentry *, struct kstatfs *);
extern int freeze_super(struct super_block *super);
extern int thaw_super(struct super_block *super);
diff --git a/kernel/acct.c b/kernel/acct.c
index 385b88461c29e..fa7eb3de2ddcd 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -122,7 +122,7 @@ static int check_free_space(struct bsd_acct_struct *acct, struct file *file)
spin_unlock(&acct_lock);
/* May block */
- if (vfs_statfs(file->f_path.dentry, &sbuf))
+ if (vfs_statfs(&file->f_path, &sbuf))
return res;
suspend = sbuf.f_blocks * SUSPEND;
resume = sbuf.f_blocks * RESUME;
--
GitLab
From 365b18189789bfa1acd9939e6312b8a4b4577b28 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 7 Jul 2010 18:53:25 +0200
Subject: [PATCH 625/863] add f_flags to struct statfs(64)
Add a flags field to help glibc implementing statvfs(3) efficiently.
We copy the flag values from glibc, and add a new ST_VALID flag to
denote that f_flags is implemented.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
arch/mips/include/asm/statfs.h | 12 ++++++---
arch/s390/include/asm/statfs.h | 9 ++++---
fs/statfs.c | 47 +++++++++++++++++++++++++++++++++-
include/asm-generic/statfs.h | 9 ++++---
include/linux/statfs.h | 25 ++++++++++++++++--
5 files changed, 89 insertions(+), 13 deletions(-)
diff --git a/arch/mips/include/asm/statfs.h b/arch/mips/include/asm/statfs.h
index c3ddf973c1c07..0f805c7a42a5a 100644
--- a/arch/mips/include/asm/statfs.h
+++ b/arch/mips/include/asm/statfs.h
@@ -33,7 +33,8 @@ struct statfs {
/* Linux specials */
__kernel_fsid_t f_fsid;
long f_namelen;
- long f_spare[6];
+ long f_flags;
+ long f_spare[5];
};
#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
@@ -53,7 +54,8 @@ struct statfs64 {
__u64 f_bavail;
__kernel_fsid_t f_fsid;
__u32 f_namelen;
- __u32 f_spare[6];
+ __u32 f_flags;
+ __u32 f_spare[5];
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
@@ -73,7 +75,8 @@ struct statfs64 { /* Same as struct statfs */
/* Linux specials */
__kernel_fsid_t f_fsid;
long f_namelen;
- long f_spare[6];
+ long f_flags;
+ long f_spare[5];
};
struct compat_statfs64 {
@@ -88,7 +91,8 @@ struct compat_statfs64 {
__u64 f_bavail;
__kernel_fsid_t f_fsid;
__u32 f_namelen;
- __u32 f_spare[6];
+ __u32 f_flags;
+ __u32 f_spare[5];
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
diff --git a/arch/s390/include/asm/statfs.h b/arch/s390/include/asm/statfs.h
index 06cc70307eceb..3be7fbd406c86 100644
--- a/arch/s390/include/asm/statfs.h
+++ b/arch/s390/include/asm/statfs.h
@@ -33,7 +33,8 @@ struct statfs {
__kernel_fsid_t f_fsid;
int f_namelen;
int f_frsize;
- int f_spare[5];
+ int f_flags;
+ int f_spare[4];
};
struct statfs64 {
@@ -47,7 +48,8 @@ struct statfs64 {
__kernel_fsid_t f_fsid;
int f_namelen;
int f_frsize;
- int f_spare[5];
+ int f_flags;
+ int f_spare[4];
};
struct compat_statfs64 {
@@ -61,7 +63,8 @@ struct compat_statfs64 {
__kernel_fsid_t f_fsid;
__u32 f_namelen;
__u32 f_frsize;
- __u32 f_spare[5];
+ __u32 f_flags;
+ __u32 f_spare[4];
};
#endif /* __s390x__ */
diff --git a/fs/statfs.c b/fs/statfs.c
index 6a305709a4da9..30ea8c8a996b1 100644
--- a/fs/statfs.c
+++ b/fs/statfs.c
@@ -2,11 +2,49 @@
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/file.h>
+#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/statfs.h>
#include <linux/security.h>
#include <linux/uaccess.h>
+static int flags_by_mnt(int mnt_flags)
+{
+ int flags = 0;
+
+ if (mnt_flags & MNT_READONLY)
+ flags |= ST_RDONLY;
+ if (mnt_flags & MNT_NOSUID)
+ flags |= ST_NOSUID;
+ if (mnt_flags & MNT_NODEV)
+ flags |= ST_NODEV;
+ if (mnt_flags & MNT_NOEXEC)
+ flags |= ST_NOEXEC;
+ if (mnt_flags & MNT_NOATIME)
+ flags |= ST_NOATIME;
+ if (mnt_flags & MNT_NODIRATIME)
+ flags |= ST_NODIRATIME;
+ if (mnt_flags & MNT_RELATIME)
+ flags |= ST_RELATIME;
+ return flags;
+}
+
+static int flags_by_sb(int s_flags)
+{
+ int flags = 0;
+ if (s_flags & MS_SYNCHRONOUS)
+ flags |= ST_SYNCHRONOUS;
+ if (s_flags & MS_MANDLOCK)
+ flags |= ST_MANDLOCK;
+ return flags;
+}
+
+static int calculate_f_flags(struct vfsmount *mnt)
+{
+ return ST_VALID | flags_by_mnt(mnt->mnt_flags) |
+ flags_by_sb(mnt->mnt_sb->s_flags);
+}
+
int statfs_by_dentry(struct dentry *dentry, struct kstatfs *buf)
{
int retval;
@@ -26,7 +64,12 @@ int statfs_by_dentry(struct dentry *dentry, struct kstatfs *buf)
int vfs_statfs(struct path *path, struct kstatfs *buf)
{
- return statfs_by_dentry(path->dentry, buf);
+ int error;
+
+ error = statfs_by_dentry(path->dentry, buf);
+ if (!error)
+ buf->f_flags = calculate_f_flags(path->mnt);
+ return error;
}
EXPORT_SYMBOL(vfs_statfs);
@@ -69,6 +112,7 @@ static int do_statfs_native(struct path *path, struct statfs *buf)
buf->f_fsid = st.f_fsid;
buf->f_namelen = st.f_namelen;
buf->f_frsize = st.f_frsize;
+ buf->f_flags = st.f_flags;
memset(buf->f_spare, 0, sizeof(buf->f_spare));
}
return 0;
@@ -96,6 +140,7 @@ static int do_statfs64(struct path *path, struct statfs64 *buf)
buf->f_fsid = st.f_fsid;
buf->f_namelen = st.f_namelen;
buf->f_frsize = st.f_frsize;
+ buf->f_flags = st.f_flags;
memset(buf->f_spare, 0, sizeof(buf->f_spare));
}
return 0;
diff --git a/include/asm-generic/statfs.h b/include/asm-generic/statfs.h
index 3b4fb3e52f0d2..0fd28e028de1d 100644
--- a/include/asm-generic/statfs.h
+++ b/include/asm-generic/statfs.h
@@ -33,7 +33,8 @@ struct statfs {
__kernel_fsid_t f_fsid;
__statfs_word f_namelen;
__statfs_word f_frsize;
- __statfs_word f_spare[5];
+ __statfs_word f_flags;
+ __statfs_word f_spare[4];
};
/*
@@ -55,7 +56,8 @@ struct statfs64 {
__kernel_fsid_t f_fsid;
__statfs_word f_namelen;
__statfs_word f_frsize;
- __statfs_word f_spare[5];
+ __statfs_word f_flags;
+ __statfs_word f_spare[4];
} ARCH_PACK_STATFS64;
/*
@@ -77,7 +79,8 @@ struct compat_statfs64 {
__kernel_fsid_t f_fsid;
__u32 f_namelen;
__u32 f_frsize;
- __u32 f_spare[5];
+ __u32 f_flags;
+ __u32 f_spare[4];
} ARCH_PACK_COMPAT_STATFS64;
#endif
diff --git a/include/linux/statfs.h b/include/linux/statfs.h
index b34cc829f98d7..0166d320a75d3 100644
--- a/include/linux/statfs.h
+++ b/include/linux/statfs.h
@@ -2,7 +2,6 @@
#define _LINUX_STATFS_H
#include <linux/types.h>
-
#include <asm/statfs.h>
struct kstatfs {
@@ -16,7 +15,29 @@ struct kstatfs {
__kernel_fsid_t f_fsid;
long f_namelen;
long f_frsize;
- long f_spare[5];
+ long f_flags;
+ long f_spare[4];
};
+/*
+ * Definitions for the flag in f_flag.
+ *
+ * Generally these flags are equivalent to the MS_ flags used in the mount
+ * ABI. The exception is ST_VALID which has the same value as MS_REMOUNT
+ * which doesn't make any sense for statfs.
+ */
+#define ST_RDONLY 0x0001 /* mount read-only */
+#define ST_NOSUID 0x0002 /* ignore suid and sgid bits */
+#define ST_NODEV 0x0004 /* disallow access to device special files */
+#define ST_NOEXEC 0x0008 /* disallow program execution */
+#define ST_SYNCHRONOUS 0x0010 /* writes are synced at once */
+#define ST_VALID 0x0020 /* f_flags support is implemented */
+#define ST_MANDLOCK 0x0040 /* allow mandatory locks on an FS */
+/* 0x0080 used for ST_WRITE in glibc */
+/* 0x0100 used for ST_APPEND in glibc */
+/* 0x0200 used for ST_IMMUTABLE in glibc */
+#define ST_NOATIME 0x0400 /* do not update access times */
+#define ST_NODIRATIME 0x0800 /* do not update directory access times */
+#define ST_RELATIME 0x1000 /* update atime relative to mtime/ctime */
+
#endif
--
GitLab
From 2aec7c523291621ebb68ba8e0bd9b52a26bb76ee Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Mon, 19 Jul 2010 18:19:41 +0200
Subject: [PATCH 626/863] mbcache: Remove unused features
The mbcache code was written to support a variable number of indexes,
but all the existing users use exactly one index. Simplify to code to
support only that case.
There are also no users of the cache entry free operation, and none of
the users keep extra data in cache entries. Remove those features as
well.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/ext2/xattr.c | 12 ++--
fs/ext3/xattr.c | 12 ++--
fs/ext4/xattr.c | 12 ++--
fs/mbcache.c | 141 ++++++++++++----------------------------
include/linux/mbcache.h | 20 ++----
5 files changed, 60 insertions(+), 137 deletions(-)
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index 5ab87e6edffce..8c29ae15129ed 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -843,7 +843,7 @@ ext2_xattr_cache_insert(struct buffer_head *bh)
ce = mb_cache_entry_alloc(ext2_xattr_cache, GFP_NOFS);
if (!ce)
return -ENOMEM;
- error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, &hash);
+ error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash);
if (error) {
mb_cache_entry_free(ce);
if (error == -EBUSY) {
@@ -917,8 +917,8 @@ ext2_xattr_cache_find(struct inode *inode, struct ext2_xattr_header *header)
return NULL; /* never share */
ea_idebug(inode, "looking for cached blocks [%x]", (int)hash);
again:
- ce = mb_cache_entry_find_first(ext2_xattr_cache, 0,
- inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_first(ext2_xattr_cache, inode->i_sb->s_bdev,
+ hash);
while (ce) {
struct buffer_head *bh;
@@ -950,7 +950,7 @@ ext2_xattr_cache_find(struct inode *inode, struct ext2_xattr_header *header)
unlock_buffer(bh);
brelse(bh);
}
- ce = mb_cache_entry_find_next(ce, 0, inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash);
}
return NULL;
}
@@ -1026,9 +1026,7 @@ static void ext2_xattr_rehash(struct ext2_xattr_header *header,
int __init
init_ext2_xattr(void)
{
- ext2_xattr_cache = mb_cache_create("ext2_xattr", NULL,
- sizeof(struct mb_cache_entry) +
- sizeof(((struct mb_cache_entry *) 0)->e_indexes[0]), 1, 6);
+ ext2_xattr_cache = mb_cache_create("ext2_xattr", 6);
if (!ext2_xattr_cache)
return -ENOMEM;
return 0;
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index 71fb8d65e54cb..e69dc6dfaa891 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -1139,7 +1139,7 @@ ext3_xattr_cache_insert(struct buffer_head *bh)
ea_bdebug(bh, "out of memory");
return;
}
- error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, &hash);
+ error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash);
if (error) {
mb_cache_entry_free(ce);
if (error == -EBUSY) {
@@ -1211,8 +1211,8 @@ ext3_xattr_cache_find(struct inode *inode, struct ext3_xattr_header *header,
return NULL; /* never share */
ea_idebug(inode, "looking for cached blocks [%x]", (int)hash);
again:
- ce = mb_cache_entry_find_first(ext3_xattr_cache, 0,
- inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_first(ext3_xattr_cache, inode->i_sb->s_bdev,
+ hash);
while (ce) {
struct buffer_head *bh;
@@ -1237,7 +1237,7 @@ ext3_xattr_cache_find(struct inode *inode, struct ext3_xattr_header *header,
return bh;
}
brelse(bh);
- ce = mb_cache_entry_find_next(ce, 0, inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash);
}
return NULL;
}
@@ -1313,9 +1313,7 @@ static void ext3_xattr_rehash(struct ext3_xattr_header *header,
int __init
init_ext3_xattr(void)
{
- ext3_xattr_cache = mb_cache_create("ext3_xattr", NULL,
- sizeof(struct mb_cache_entry) +
- sizeof(((struct mb_cache_entry *) 0)->e_indexes[0]), 1, 6);
+ ext3_xattr_cache = mb_cache_create("ext3_xattr", 6);
if (!ext3_xattr_cache)
return -ENOMEM;
return 0;
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 04338009793ab..1c93198353e76 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1418,7 +1418,7 @@ ext4_xattr_cache_insert(struct buffer_head *bh)
ea_bdebug(bh, "out of memory");
return;
}
- error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, &hash);
+ error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash);
if (error) {
mb_cache_entry_free(ce);
if (error == -EBUSY) {
@@ -1490,8 +1490,8 @@ ext4_xattr_cache_find(struct inode *inode, struct ext4_xattr_header *header,
return NULL; /* never share */
ea_idebug(inode, "looking for cached blocks [%x]", (int)hash);
again:
- ce = mb_cache_entry_find_first(ext4_xattr_cache, 0,
- inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_first(ext4_xattr_cache, inode->i_sb->s_bdev,
+ hash);
while (ce) {
struct buffer_head *bh;
@@ -1515,7 +1515,7 @@ ext4_xattr_cache_find(struct inode *inode, struct ext4_xattr_header *header,
return bh;
}
brelse(bh);
- ce = mb_cache_entry_find_next(ce, 0, inode->i_sb->s_bdev, hash);
+ ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash);
}
return NULL;
}
@@ -1591,9 +1591,7 @@ static void ext4_xattr_rehash(struct ext4_xattr_header *header,
int __init
init_ext4_xattr(void)
{
- ext4_xattr_cache = mb_cache_create("ext4_xattr", NULL,
- sizeof(struct mb_cache_entry) +
- sizeof(((struct mb_cache_entry *) 0)->e_indexes[0]), 1, 6);
+ ext4_xattr_cache = mb_cache_create("ext4_xattr", 6);
if (!ext4_xattr_cache)
return -ENOMEM;
return 0;
diff --git a/fs/mbcache.c b/fs/mbcache.c
index e28f21b953443..8a2cbd8230793 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -79,15 +79,11 @@ EXPORT_SYMBOL(mb_cache_entry_find_next);
struct mb_cache {
struct list_head c_cache_list;
const char *c_name;
- struct mb_cache_op c_op;
atomic_t c_entry_count;
int c_bucket_bits;
-#ifndef MB_CACHE_INDEXES_COUNT
- int c_indexes_count;
-#endif
- struct kmem_cache *c_entry_cache;
+ struct kmem_cache *c_entry_cache;
struct list_head *c_block_hash;
- struct list_head *c_indexes_hash[0];
+ struct list_head *c_index_hash;
};
@@ -101,16 +97,6 @@ static LIST_HEAD(mb_cache_list);
static LIST_HEAD(mb_cache_lru_list);
static DEFINE_SPINLOCK(mb_cache_spinlock);
-static inline int
-mb_cache_indexes(struct mb_cache *cache)
-{
-#ifdef MB_CACHE_INDEXES_COUNT
- return MB_CACHE_INDEXES_COUNT;
-#else
- return cache->c_indexes_count;
-#endif
-}
-
/*
* What the mbcache registers as to get shrunk dynamically.
*/
@@ -132,12 +118,9 @@ __mb_cache_entry_is_hashed(struct mb_cache_entry *ce)
static void
__mb_cache_entry_unhash(struct mb_cache_entry *ce)
{
- int n;
-
if (__mb_cache_entry_is_hashed(ce)) {
list_del_init(&ce->e_block_list);
- for (n=0; n<mb_cache_indexes(ce->e_cache); n++)
- list_del(&ce->e_indexes[n].o_list);
+ list_del(&ce->e_index.o_list);
}
}
@@ -148,16 +131,8 @@ __mb_cache_entry_forget(struct mb_cache_entry *ce, gfp_t gfp_mask)
struct mb_cache *cache = ce->e_cache;
mb_assert(!(ce->e_used || ce->e_queued));
- if (cache->c_op.free && cache->c_op.free(ce, gfp_mask)) {
- /* free failed -- put back on the lru list
- for freeing later. */
- spin_lock(&mb_cache_spinlock);
- list_add(&ce->e_lru_list, &mb_cache_lru_list);
- spin_unlock(&mb_cache_spinlock);
- } else {
- kmem_cache_free(cache->c_entry_cache, ce);
- atomic_dec(&cache->c_entry_count);
- }
+ kmem_cache_free(cache->c_entry_cache, ce);
+ atomic_dec(&cache->c_entry_count);
}
@@ -243,72 +218,49 @@ mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
* memory was available.
*
* @name: name of the cache (informal)
- * @cache_op: contains the callback called when freeing a cache entry
- * @entry_size: The size of a cache entry, including
- * struct mb_cache_entry
- * @indexes_count: number of additional indexes in the cache. Must equal
- * MB_CACHE_INDEXES_COUNT if the number of indexes is
- * hardwired.
* @bucket_bits: log2(number of hash buckets)
*/
struct mb_cache *
-mb_cache_create(const char *name, struct mb_cache_op *cache_op,
- size_t entry_size, int indexes_count, int bucket_bits)
+mb_cache_create(const char *name, int bucket_bits)
{
- int m=0, n, bucket_count = 1 << bucket_bits;
+ int n, bucket_count = 1 << bucket_bits;
struct mb_cache *cache = NULL;
- if(entry_size < sizeof(struct mb_cache_entry) +
- indexes_count * sizeof(((struct mb_cache_entry *) 0)->e_indexes[0]))
- return NULL;
-
- cache = kmalloc(sizeof(struct mb_cache) +
- indexes_count * sizeof(struct list_head), GFP_KERNEL);
+ cache = kmalloc(sizeof(struct mb_cache), GFP_KERNEL);
if (!cache)
- goto fail;
+ return NULL;
cache->c_name = name;
- cache->c_op.free = NULL;
- if (cache_op)
- cache->c_op.free = cache_op->free;
atomic_set(&cache->c_entry_count, 0);
cache->c_bucket_bits = bucket_bits;
-#ifdef MB_CACHE_INDEXES_COUNT
- mb_assert(indexes_count == MB_CACHE_INDEXES_COUNT);
-#else
- cache->c_indexes_count = indexes_count;
-#endif
cache->c_block_hash = kmalloc(bucket_count * sizeof(struct list_head),
GFP_KERNEL);
if (!cache->c_block_hash)
goto fail;
for (n=0; n<bucket_count; n++)
INIT_LIST_HEAD(&cache->c_block_hash[n]);
- for (m=0; m<indexes_count; m++) {
- cache->c_indexes_hash[m] = kmalloc(bucket_count *
- sizeof(struct list_head),
- GFP_KERNEL);
- if (!cache->c_indexes_hash[m])
- goto fail;
- for (n=0; n<bucket_count; n++)
- INIT_LIST_HEAD(&cache->c_indexes_hash[m][n]);
- }
- cache->c_entry_cache = kmem_cache_create(name, entry_size, 0,
+ cache->c_index_hash = kmalloc(bucket_count * sizeof(struct list_head),
+ GFP_KERNEL);
+ if (!cache->c_index_hash)
+ goto fail;
+ for (n=0; n<bucket_count; n++)
+ INIT_LIST_HEAD(&cache->c_index_hash[n]);
+ cache->c_entry_cache = kmem_cache_create(name,
+ sizeof(struct mb_cache_entry), 0,
SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD, NULL);
if (!cache->c_entry_cache)
- goto fail;
+ goto fail2;
spin_lock(&mb_cache_spinlock);
list_add(&cache->c_cache_list, &mb_cache_list);
spin_unlock(&mb_cache_spinlock);
return cache;
+fail2:
+ kfree(cache->c_index_hash);
+
fail:
- if (cache) {
- while (--m >= 0)
- kfree(cache->c_indexes_hash[m]);
- kfree(cache->c_block_hash);
- kfree(cache);
- }
+ kfree(cache->c_block_hash);
+ kfree(cache);
return NULL;
}
@@ -357,7 +309,6 @@ mb_cache_destroy(struct mb_cache *cache)
{
LIST_HEAD(free_list);
struct list_head *l, *ltmp;
- int n;
spin_lock(&mb_cache_spinlock);
list_for_each_safe(l, ltmp, &mb_cache_lru_list) {
@@ -384,8 +335,7 @@ mb_cache_destroy(struct mb_cache *cache)
kmem_cache_destroy(cache->c_entry_cache);
- for (n=0; n < mb_cache_indexes(cache); n++)
- kfree(cache->c_indexes_hash[n]);
+ kfree(cache->c_index_hash);
kfree(cache->c_block_hash);
kfree(cache);
}
@@ -429,17 +379,16 @@ mb_cache_entry_alloc(struct mb_cache *cache, gfp_t gfp_flags)
*
* @bdev: device the cache entry belongs to
* @block: block number
- * @keys: array of additional keys. There must be indexes_count entries
- * in the array (as specified when creating the cache).
+ * @key: lookup key
*/
int
mb_cache_entry_insert(struct mb_cache_entry *ce, struct block_device *bdev,
- sector_t block, unsigned int keys[])
+ sector_t block, unsigned int key)
{
struct mb_cache *cache = ce->e_cache;
unsigned int bucket;
struct list_head *l;
- int error = -EBUSY, n;
+ int error = -EBUSY;
bucket = hash_long((unsigned long)bdev + (block & 0xffffffff),
cache->c_bucket_bits);
@@ -454,12 +403,9 @@ mb_cache_entry_insert(struct mb_cache_entry *ce, struct block_device *bdev,
ce->e_bdev = bdev;
ce->e_block = block;
list_add(&ce->e_block_list, &cache->c_block_hash[bucket]);
- for (n=0; n<mb_cache_indexes(cache); n++) {
- ce->e_indexes[n].o_key = keys[n];
- bucket = hash_long(keys[n], cache->c_bucket_bits);
- list_add(&ce->e_indexes[n].o_list,
- &cache->c_indexes_hash[n][bucket]);
- }
+ ce->e_index.o_key = key;
+ bucket = hash_long(key, cache->c_bucket_bits);
+ list_add(&ce->e_index.o_list, &cache->c_index_hash[bucket]);
error = 0;
out:
spin_unlock(&mb_cache_spinlock);
@@ -555,13 +501,12 @@ mb_cache_entry_get(struct mb_cache *cache, struct block_device *bdev,
static struct mb_cache_entry *
__mb_cache_entry_find(struct list_head *l, struct list_head *head,
- int index, struct block_device *bdev, unsigned int key)
+ struct block_device *bdev, unsigned int key)
{
while (l != head) {
struct mb_cache_entry *ce =
- list_entry(l, struct mb_cache_entry,
- e_indexes[index].o_list);
- if (ce->e_bdev == bdev && ce->e_indexes[index].o_key == key) {
+ list_entry(l, struct mb_cache_entry, e_index.o_list);
+ if (ce->e_bdev == bdev && ce->e_index.o_key == key) {
DEFINE_WAIT(wait);
if (!list_empty(&ce->e_lru_list))
@@ -603,23 +548,20 @@ __mb_cache_entry_find(struct list_head *l, struct list_head *head,
* returned cache entry is locked for shared access ("multiple readers").
*
* @cache: the cache to search
- * @index: the number of the additonal index to search (0<=index<indexes_count)
* @bdev: the device the cache entry should belong to
* @key: the key in the index
*/
struct mb_cache_entry *
-mb_cache_entry_find_first(struct mb_cache *cache, int index,
- struct block_device *bdev, unsigned int key)
+mb_cache_entry_find_first(struct mb_cache *cache, struct block_device *bdev,
+ unsigned int key)
{
unsigned int bucket = hash_long(key, cache->c_bucket_bits);
struct list_head *l;
struct mb_cache_entry *ce;
- mb_assert(index < mb_cache_indexes(cache));
spin_lock(&mb_cache_spinlock);
- l = cache->c_indexes_hash[index][bucket].next;
- ce = __mb_cache_entry_find(l, &cache->c_indexes_hash[index][bucket],
- index, bdev, key);
+ l = cache->c_index_hash[bucket].next;
+ ce = __mb_cache_entry_find(l, &cache->c_index_hash[bucket], bdev, key);
spin_unlock(&mb_cache_spinlock);
return ce;
}
@@ -640,12 +582,11 @@ mb_cache_entry_find_first(struct mb_cache *cache, int index,
* }
*
* @prev: The previous match
- * @index: the number of the additonal index to search (0<=index<indexes_count)
* @bdev: the device the cache entry should belong to
* @key: the key in the index
*/
struct mb_cache_entry *
-mb_cache_entry_find_next(struct mb_cache_entry *prev, int index,
+mb_cache_entry_find_next(struct mb_cache_entry *prev,
struct block_device *bdev, unsigned int key)
{
struct mb_cache *cache = prev->e_cache;
@@ -653,11 +594,9 @@ mb_cache_entry_find_next(struct mb_cache_entry *prev, int index,
struct list_head *l;
struct mb_cache_entry *ce;
- mb_assert(index < mb_cache_indexes(cache));
spin_lock(&mb_cache_spinlock);
- l = prev->e_indexes[index].o_list.next;
- ce = __mb_cache_entry_find(l, &cache->c_indexes_hash[index][bucket],
- index, bdev, key);
+ l = prev->e_index.o_list.next;
+ ce = __mb_cache_entry_find(l, &cache->c_index_hash[bucket], bdev, key);
__mb_cache_entry_release_unlock(prev);
return ce;
}
diff --git a/include/linux/mbcache.h b/include/linux/mbcache.h
index a09b84e4fdb42..54cbbac1e71da 100644
--- a/include/linux/mbcache.h
+++ b/include/linux/mbcache.h
@@ -4,9 +4,6 @@
(C) 2001 by Andreas Gruenbacher, <a.gruenbacher@computer.org>
*/
-/* Hardwire the number of additional indexes */
-#define MB_CACHE_INDEXES_COUNT 1
-
struct mb_cache_entry {
struct list_head e_lru_list;
struct mb_cache *e_cache;
@@ -18,17 +15,12 @@ struct mb_cache_entry {
struct {
struct list_head o_list;
unsigned int o_key;
- } e_indexes[0];
-};
-
-struct mb_cache_op {
- int (*free)(struct mb_cache_entry *, gfp_t);
+ } e_index;
};
/* Functions on caches */
-struct mb_cache * mb_cache_create(const char *, struct mb_cache_op *, size_t,
- int, int);
+struct mb_cache *mb_cache_create(const char *, int);
void mb_cache_shrink(struct block_device *);
void mb_cache_destroy(struct mb_cache *);
@@ -36,17 +28,15 @@ void mb_cache_destroy(struct mb_cache *);
struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *, gfp_t);
int mb_cache_entry_insert(struct mb_cache_entry *, struct block_device *,
- sector_t, unsigned int[]);
+ sector_t, unsigned int);
void mb_cache_entry_release(struct mb_cache_entry *);
void mb_cache_entry_free(struct mb_cache_entry *);
struct mb_cache_entry *mb_cache_entry_get(struct mb_cache *,
struct block_device *,
sector_t);
-#if !defined(MB_CACHE_INDEXES_COUNT) || (MB_CACHE_INDEXES_COUNT > 0)
-struct mb_cache_entry *mb_cache_entry_find_first(struct mb_cache *cache, int,
+struct mb_cache_entry *mb_cache_entry_find_first(struct mb_cache *cache,
struct block_device *,
unsigned int);
-struct mb_cache_entry *mb_cache_entry_find_next(struct mb_cache_entry *, int,
+struct mb_cache_entry *mb_cache_entry_find_next(struct mb_cache_entry *,
struct block_device *,
unsigned int);
-#endif
--
GitLab
From e566d48c9bd56f57e25e855a21e06ca2c2525795 Mon Sep 17 00:00:00 2001
From: Andreas Gruenbacher <agruen@suse.de>
Date: Wed, 21 Jul 2010 19:44:45 +0200
Subject: [PATCH 627/863] mbcache: fix shrinker function return value
The shrinker function is supposed to return the number of cache
entries after shrinking, not before shrinking. Fix that.
Based on a patch from Wang Sheng-Hui <crosslonelyover@gmail.com>.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/mbcache.c | 27 ++++++++++-----------------
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/fs/mbcache.c b/fs/mbcache.c
index 8a2cbd8230793..cf4e6cdfd15b5 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -176,22 +176,12 @@ static int
mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free_list);
- struct list_head *l, *ltmp;
+ struct mb_cache *cache;
+ struct mb_cache_entry *entry, *tmp;
int count = 0;
- spin_lock(&mb_cache_spinlock);
- list_for_each(l, &mb_cache_list) {
- struct mb_cache *cache =
- list_entry(l, struct mb_cache, c_cache_list);
- mb_debug("cache %s (%d)", cache->c_name,
- atomic_read(&cache->c_entry_count));
- count += atomic_read(&cache->c_entry_count);
- }
mb_debug("trying to free %d entries", nr_to_scan);
- if (nr_to_scan == 0) {
- spin_unlock(&mb_cache_spinlock);
- goto out;
- }
+ spin_lock(&mb_cache_spinlock);
while (nr_to_scan-- && !list_empty(&mb_cache_lru_list)) {
struct mb_cache_entry *ce =
list_entry(mb_cache_lru_list.next,
@@ -199,12 +189,15 @@ mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
list_move_tail(&ce->e_lru_list, &free_list);
__mb_cache_entry_unhash(ce);
}
+ list_for_each_entry(cache, &mb_cache_list, c_cache_list) {
+ mb_debug("cache %s (%d)", cache->c_name,
+ atomic_read(&cache->c_entry_count));
+ count += atomic_read(&cache->c_entry_count);
+ }
spin_unlock(&mb_cache_spinlock);
- list_for_each_safe(l, ltmp, &free_list) {
- __mb_cache_entry_forget(list_entry(l, struct mb_cache_entry,
- e_lru_list), gfp_mask);
+ list_for_each_entry_safe(entry, tmp, &free_list, e_lru_list) {
+ __mb_cache_entry_forget(entry, gfp_mask);
}
-out:
return (count / 100) * sysctl_vfs_cache_pressure;
}
--
GitLab
From 1b9474635e21eef0f3e69fd1c7b1b9598ffdddd3 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Sun, 18 Jul 2010 17:51:21 -0400
Subject: [PATCH 628/863] cifs: truncate fallout
Remove the calls to inode_newsize_ok given that we already did it as
part of inode_change_ok in the beginning of cifs_setattr_(no)unix.
No need to call ->truncate if cifs doesn't have one, so remove the
explicit call in cifs_vmtruncate, and replace the calls to vmtruncate
with truncate_setsize which is vmtruncate minus inode_newsize_ok
and the call to ->truncate.
Rename cifs_vmtruncate to cifs_setsize to match the new calling conventions.
Question 1: why does cifs do the pagecache munging and i_size update twice
for each setattr call, once opencoded in cifs_vmtruncate, and once
using the VFS helpers?
Question 2: what is supposed to be protected by i_lock in cifs_vmtruncate?
Do we need it around the call to inode_change_ok?
[AV: fixed build breakage]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/cifs/inode.c | 30 +++++++-----------------------
1 file changed, 7 insertions(+), 23 deletions(-)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index b95f4a5af0138..ddbe8a84c51de 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1679,26 +1679,16 @@ static int cifs_truncate_page(struct address_space *mapping, loff_t from)
return rc;
}
-static int cifs_vmtruncate(struct inode *inode, loff_t offset)
+static void cifs_setsize(struct inode *inode, loff_t offset)
{
loff_t oldsize;
- int err;
spin_lock(&inode->i_lock);
- err = inode_newsize_ok(inode, offset);
- if (err) {
- spin_unlock(&inode->i_lock);
- goto out;
- }
-
oldsize = inode->i_size;
i_size_write(inode, offset);
spin_unlock(&inode->i_lock);
+
truncate_pagecache(inode, oldsize, offset);
- if (inode->i_op->truncate)
- inode->i_op->truncate(inode);
-out:
- return err;
}
static int
@@ -1771,7 +1761,7 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs,
if (rc == 0) {
cifsInode->server_eof = attrs->ia_size;
- rc = cifs_vmtruncate(inode, attrs->ia_size);
+ cifs_setsize(inode, attrs->ia_size);
cifs_truncate_page(inode->i_mapping, inode->i_size);
}
@@ -1891,11 +1881,8 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
goto out;
if ((attrs->ia_valid & ATTR_SIZE) &&
- attrs->ia_size != i_size_read(inode)) {
- rc = vmtruncate(inode, attrs->ia_size);
- if (rc)
- goto out;
- }
+ attrs->ia_size != i_size_read(inode))
+ truncate_setsize(inode, attrs->ia_size);
setattr_copy(inode, attrs);
mark_inode_dirty(inode);
@@ -2050,11 +2037,8 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
goto cifs_setattr_exit;
if ((attrs->ia_valid & ATTR_SIZE) &&
- attrs->ia_size != i_size_read(inode)) {
- rc = vmtruncate(inode, attrs->ia_size);
- if (rc)
- goto cifs_setattr_exit;
- }
+ attrs->ia_size != i_size_read(inode))
+ truncate_setsize(inode, attrs->ia_size);
setattr_copy(inode, attrs);
mark_inode_dirty(inode);
--
GitLab
From 669d5f1f608f7de29bb467bb239517a414e43777 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 5 Jul 2010 15:14:59 +0300
Subject: [PATCH 629/863] AFFS: clean up dirty flag usage
In 'affs_write_super()': remove ancient and wrong commented code,
remove unneeded 'clean' variable, so the function becomes a bit
cleaner and simpler.
In 'affs_remount(): remove unnecessary SB dirty flag changes.
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/affs/super.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 2c804a87c142e..fde3b9ae700f6 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -61,20 +61,13 @@ affs_put_super(struct super_block *sb)
static void
affs_write_super(struct super_block *sb)
{
- int clean = 2;
-
lock_super(sb);
- if (!(sb->s_flags & MS_RDONLY)) {
- // if (sbi->s_bitmap[i].bm_bh) {
- // if (buffer_dirty(sbi->s_bitmap[i].bm_bh)) {
- // clean = 0;
- affs_commit_super(sb, clean);
- sb->s_dirt = !clean; /* redo until bitmap synced */
- } else
- sb->s_dirt = 0;
+ if (!(sb->s_flags & MS_RDONLY))
+ affs_commit_super(sb, 2);
+ sb->s_dirt = 0;
unlock_super(sb);
- pr_debug("AFFS: write_super() at %lu, clean=%d\n", get_seconds(), clean);
+ pr_debug("AFFS: write_super() at %lu, clean=2\n", get_seconds());
}
static int
@@ -553,9 +546,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
return 0;
}
if (*flags & MS_RDONLY) {
- sb->s_dirt = 1;
- while (sb->s_dirt)
- affs_write_super(sb);
+ affs_write_super(sb);
affs_free_bitmap(sb);
} else
res = affs_init_bitmap(sb, flags);
--
GitLab
From 7435d50611b04c1155a939a9f373154a53606592 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 5 Jul 2010 15:15:00 +0300
Subject: [PATCH 630/863] AFFS: wait for sb synchronization when needed
AFFS does not ever wait for superblock synchronization in
->put_super(), ->write_super, and ->sync_fs().
However, it should wait for synchronization in ->put_super() because
it is about to be unmounted, in ->write_super() because this is
periodic SB synchronization performed from a separate kernel thread,
and in ->sync_fs() it should respect the 'wait' flag. This patch fixes
the situation.
Also, in ->put_super(), do not write the SB if it is not dirty.
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/affs/super.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/fs/affs/super.c b/fs/affs/super.c
index fde3b9ae700f6..33c4e7eef470e 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -26,7 +26,7 @@ static int affs_statfs(struct dentry *dentry, struct kstatfs *buf);
static int affs_remount (struct super_block *sb, int *flags, char *data);
static void
-affs_commit_super(struct super_block *sb, int clean)
+affs_commit_super(struct super_block *sb, int wait, int clean)
{
struct affs_sb_info *sbi = AFFS_SB(sb);
struct buffer_head *bh = sbi->s_root_bh;
@@ -36,6 +36,8 @@ affs_commit_super(struct super_block *sb, int clean)
secs_to_datestamp(get_seconds(), &tail->disk_change);
affs_fix_checksum(sb, bh);
mark_buffer_dirty(bh);
+ if (wait)
+ sync_dirty_buffer(bh);
}
static void
@@ -46,8 +48,8 @@ affs_put_super(struct super_block *sb)
lock_kernel();
- if (!(sb->s_flags & MS_RDONLY))
- affs_commit_super(sb, 1);
+ if (!(sb->s_flags & MS_RDONLY) && sb->s_dirt)
+ affs_commit_super(sb, 1, 1);
kfree(sbi->s_prefix);
affs_free_bitmap(sb);
@@ -63,7 +65,7 @@ affs_write_super(struct super_block *sb)
{
lock_super(sb);
if (!(sb->s_flags & MS_RDONLY))
- affs_commit_super(sb, 2);
+ affs_commit_super(sb, 1, 2);
sb->s_dirt = 0;
unlock_super(sb);
@@ -74,7 +76,7 @@ static int
affs_sync_fs(struct super_block *sb, int wait)
{
lock_super(sb);
- affs_commit_super(sb, 2);
+ affs_commit_super(sb, wait, 2);
sb->s_dirt = 0;
unlock_super(sb);
return 0;
--
GitLab
From 4e29d50a28c267bd1d1731a9fb8f773663d93e23 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 5 Jul 2010 15:15:01 +0300
Subject: [PATCH 631/863] BFS: clean up the superblock usage
BFS is a very simple FS and its superblocks contains only static
information and is never changed. However, the BFS code for some
misterious reasons marked its buffer head as dirty from time to
time, but nothing in that buffer was ever changed.
This patch removes all the BFS superblock manipulation, simply
because it is not needed. It removes:
1. The si_sbh filed from 'struct bfs_sb_info' because it is not
needed. We only need to read the SB once on mount to get the
start of data blocks and the FS size. After this, we can forget
about the SB.
2. All instances of 'mark_buffer_dirty(sbh)' for BFS SB because
it is never changed.
3. The '->sync_fs()' method because there is nothing to sync
(inodes are synched by VFS).
4. The '->write_super()' method, again, because the SB is never
changed.
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/bfs/bfs.h | 1 -
fs/bfs/file.c | 3 ---
fs/bfs/inode.c | 46 +++++++---------------------------------------
3 files changed, 7 insertions(+), 43 deletions(-)
diff --git a/fs/bfs/bfs.h b/fs/bfs/bfs.h
index 7109e451abf76..f7f87e233dd9d 100644
--- a/fs/bfs/bfs.h
+++ b/fs/bfs/bfs.h
@@ -17,7 +17,6 @@ struct bfs_sb_info {
unsigned long si_lf_eblk;
unsigned long si_lasti;
unsigned long *si_imap;
- struct buffer_head *si_sbh; /* buffer header w/superblock */
struct mutex bfs_lock;
};
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index 8fc2e9c9739dd..eb67edd0f8ea3 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -70,7 +70,6 @@ static int bfs_get_block(struct inode *inode, sector_t block,
struct super_block *sb = inode->i_sb;
struct bfs_sb_info *info = BFS_SB(sb);
struct bfs_inode_info *bi = BFS_I(inode);
- struct buffer_head *sbh = info->si_sbh;
phys = bi->i_sblock + block;
if (!create) {
@@ -112,7 +111,6 @@ static int bfs_get_block(struct inode *inode, sector_t block,
info->si_freeb -= phys - bi->i_eblock;
info->si_lf_eblk = bi->i_eblock = phys;
mark_inode_dirty(inode);
- mark_buffer_dirty(sbh);
err = 0;
goto out;
}
@@ -147,7 +145,6 @@ static int bfs_get_block(struct inode *inode, sector_t block,
*/
info->si_freeb -= bi->i_eblock - bi->i_sblock + 1 - inode->i_blocks;
mark_inode_dirty(inode);
- mark_buffer_dirty(sbh);
map_bh(bh_result, sb, phys);
out:
mutex_unlock(&info->bfs_lock);
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 0499822b15682..c4daf0f5fc021 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -31,7 +31,6 @@ MODULE_LICENSE("GPL");
#define dprintf(x...)
#endif
-static void bfs_write_super(struct super_block *s);
void dump_imap(const char *prefix, struct super_block *s);
struct inode *bfs_iget(struct super_block *sb, unsigned long ino)
@@ -204,33 +203,11 @@ static void bfs_evict_inode(struct inode *inode)
* "last block of the last file" even if there is no
* real file there, saves us 1 gap.
*/
- if (info->si_lf_eblk == bi->i_eblock) {
+ if (info->si_lf_eblk == bi->i_eblock)
info->si_lf_eblk = bi->i_sblock - 1;
- mark_buffer_dirty(info->si_sbh);
- }
mutex_unlock(&info->bfs_lock);
}
-static int bfs_sync_fs(struct super_block *sb, int wait)
-{
- struct bfs_sb_info *info = BFS_SB(sb);
-
- mutex_lock(&info->bfs_lock);
- mark_buffer_dirty(info->si_sbh);
- sb->s_dirt = 0;
- mutex_unlock(&info->bfs_lock);
-
- return 0;
-}
-
-static void bfs_write_super(struct super_block *sb)
-{
- if (!(sb->s_flags & MS_RDONLY))
- bfs_sync_fs(sb, 1);
- else
- sb->s_dirt = 0;
-}
-
static void bfs_put_super(struct super_block *s)
{
struct bfs_sb_info *info = BFS_SB(s);
@@ -240,10 +217,6 @@ static void bfs_put_super(struct super_block *s)
lock_kernel();
- if (s->s_dirt)
- bfs_write_super(s);
-
- brelse(info->si_sbh);
mutex_destroy(&info->bfs_lock);
kfree(info->si_imap);
kfree(info);
@@ -315,8 +288,6 @@ static const struct super_operations bfs_sops = {
.write_inode = bfs_write_inode,
.evict_inode = bfs_evict_inode,
.put_super = bfs_put_super,
- .write_super = bfs_write_super,
- .sync_fs = bfs_sync_fs,
.statfs = bfs_statfs,
};
@@ -343,7 +314,7 @@ void dump_imap(const char *prefix, struct super_block *s)
static int bfs_fill_super(struct super_block *s, void *data, int silent)
{
- struct buffer_head *bh;
+ struct buffer_head *bh, *sbh;
struct bfs_super_block *bfs_sb;
struct inode *inode;
unsigned i, imap_len;
@@ -359,10 +330,10 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
sb_set_blocksize(s, BFS_BSIZE);
- info->si_sbh = sb_bread(s, 0);
- if (!info->si_sbh)
+ sbh = sb_bread(s, 0);
+ if (!sbh)
goto out;
- bfs_sb = (struct bfs_super_block *)info->si_sbh->b_data;
+ bfs_sb = (struct bfs_super_block *)sbh->b_data;
if (le32_to_cpu(bfs_sb->s_magic) != BFS_MAGIC) {
if (!silent)
printf("No BFS filesystem on %s (magic=%08x)\n",
@@ -466,10 +437,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
info->si_lf_eblk = eblock;
}
brelse(bh);
- if (!(s->s_flags & MS_RDONLY)) {
- mark_buffer_dirty(info->si_sbh);
- s->s_dirt = 1;
- }
+ brelse(sbh);
dump_imap("read_super", s);
return 0;
@@ -479,7 +447,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
out2:
kfree(info->si_imap);
out1:
- brelse(info->si_sbh);
+ brelse(sbh);
out:
mutex_destroy(&info->bfs_lock);
kfree(info);
--
GitLab
From 696ac96c2757963cd6751c26215e3c6d328705aa Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 5 Jul 2010 15:15:02 +0300
Subject: [PATCH 632/863] btrfs: remove junk sb_dirt change
BTRFS does not define a '->write_super()' method, so it should
not mark its superblock as dirty. This looks like some left-over.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/btrfs/inode.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 2c54f04a0bf5e..8976c3343a96a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2938,7 +2938,6 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans,
dir->i_mtime = dir->i_ctime = CURRENT_TIME;
ret = btrfs_update_inode(trans, root, dir);
BUG_ON(ret);
- dir->i_sb->s_dirt = 1;
btrfs_free_path(path);
return 0;
--
GitLab
From 315671f3b8091bc8e15035ffeba5f7bff7b8edec Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 5 Jul 2010 15:15:03 +0300
Subject: [PATCH 633/863] sysv: do not mark superblock dirty on mount
I did not find any docs about this file-system, and I have no possibility
to test my changes. Thus, this is untested.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/sysv/super.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/fs/sysv/super.c b/fs/sysv/super.c
index 5a903da545515..0e44a62533525 100644
--- a/fs/sysv/super.c
+++ b/fs/sysv/super.c
@@ -347,7 +347,6 @@ static int complete_read_super(struct super_block *sb, int silent, int size)
sb->s_flags |= MS_RDONLY;
if (sbi->s_truncate)
sb->s_root->d_op = &sysv_dentry_operations;
- sb->s_dirt = 1;
return 1;
}
--
GitLab
From 719f2c879f4dda7d7f303bd387d37cd96db29d31 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 5 Jul 2010 15:15:04 +0300
Subject: [PATCH 634/863] sysv: do not mark superblock dirty on remount
No need to mark the superblock as dirty in sysv_remount, synchronize
it instead (only if mounting R/O).
I did not find any docs about this file-system, and I have no possibility
to test my changes. Thus, this is untested. I see other issues in sysv,
e.g., why sysv_sync_fs writes only in the FSTYPE_SYSV4 case? However,
it marks its SB bh's dirty for all types, and does not wait for them
ever. With zero docs I'm unable to fix this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/sysv/inode.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 613a5056e880b..de44d067b9e68 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -71,8 +71,8 @@ static int sysv_remount(struct super_block *sb, int *flags, char *data)
lock_super(sb);
if (sbi->s_forced_ro)
*flags |= MS_RDONLY;
- if (!(*flags & MS_RDONLY))
- sb->s_dirt = 1;
+ if (*flags & MS_RDONLY)
+ sysv_write_super(sb);
unlock_super(sb);
return 0;
}
--
GitLab
From 4f331f01b9c43bf001d3ffee578a97a1e0633eac Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 20 Jul 2010 15:18:07 -0700
Subject: [PATCH 635/863] vfs: don't hold s_umount over close_bdev_exclusive()
call
Fix an obscure AB-BA deadlock in get_sb_bdev().
When a superblock is mounted more than once get_sb_bdev() calls
close_bdev_exclusive() to drop the extra bdev reference while holding
s_umount. However, sb->s_umount nests inside bd_mutex during
__invalidate_device() and close_bdev_exclusive() acquires bd_mutex during
blkdev_put(); thus creating an AB-BA deadlock.
This condition doesn't trigger frequently. For this condition to be
visible to lockdep, the filesystem must occupy the whole device (as
__invalidate_device() only grabs bd_mutex for the whole device), the FS
must be mounted more than once and partition rescan should be issued while
the FS is still mounted.
Fix it by dropping s_umount over close_bdev_exclusive().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/super.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/fs/super.c b/fs/super.c
index 938119ab8dcbc..3479ca6f005ff 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -773,7 +773,16 @@ int get_sb_bdev(struct file_system_type *fs_type,
goto error_bdev;
}
+ /*
+ * s_umount nests inside bd_mutex during
+ * __invalidate_device(). close_bdev_exclusive()
+ * acquires bd_mutex and can't be called under
+ * s_umount. Drop s_umount temporarily. This is safe
+ * as we're holding an active reference.
+ */
+ up_write(&s->s_umount);
close_bdev_exclusive(bdev, mode);
+ down_write(&s->s_umount);
} else {
char b[BDEVNAME_SIZE];
--
GitLab
From 7a4dec53897ecd3367efb1e12fe8a4edc47dc0e9 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 9 Aug 2010 12:05:43 -0400
Subject: [PATCH 636/863] Fix sget() race with failing mount
If sget() finds a matching superblock being set up, it'll
grab an active reference to it and grab s_umount. That's
fine - we'll wait for completion of foofs_get_sb() that way.
However, if said foofs_get_sb() fails we'll end up holding
the halfway-created superblock. deactivate_locked_super()
called by foofs_get_sb() will just unlock the sucker since
we are holding another active reference to it.
What we need is a way to tell if superblock has been successfully
set up. Unfortunately, neither ->s_root nor the check for
MS_ACTIVE quite fit. Cheap and easy way, suitable for backport:
new flag set by the (only) caller of ->get_sb(). If that flag
isn't present by the time sget() grabbed s_umount on preexisting
superblock it has found, it's seeing a stillborn and should
just bury it with deactivate_locked_super() (and repeat the search).
Longer term we want to set that flag in ->get_sb() instances (and
check for it to distinguish between "sget() found us a live sb"
and "sget() has allocated an sb, we need to set it up" in there,
instead of checking ->s_root as we do now).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
---
fs/namespace.c | 2 +-
fs/super.c | 6 ++++++
include/linux/fs.h | 1 +
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/fs/namespace.c b/fs/namespace.c
index 88058de59c7c2..32dcd24bbc9a3 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1984,7 +1984,7 @@ long do_mount(char *dev_name, char *dir_name, char *type_page,
if (flags & MS_RDONLY)
mnt_flags |= MNT_READONLY;
- flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE |
+ flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE | MS_BORN |
MS_NOATIME | MS_NODIRATIME | MS_RELATIME| MS_KERNMOUNT |
MS_STRICTATIME);
diff --git a/fs/super.c b/fs/super.c
index 3479ca6f005ff..bd9eea4bb2bbe 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -305,8 +305,13 @@ struct super_block *sget(struct file_system_type *type,
if (s) {
up_write(&s->s_umount);
destroy_super(s);
+ s = NULL;
}
down_write(&old->s_umount);
+ if (unlikely(!(old->s_flags & MS_BORN))) {
+ deactivate_locked_super(old);
+ goto retry;
+ }
return old;
}
}
@@ -918,6 +923,7 @@ vfs_kern_mount(struct file_system_type *type, int flags, const char *name, void
goto out_free_secdata;
BUG_ON(!mnt->mnt_sb);
WARN_ON(!mnt->mnt_sb->s_bdi);
+ mnt->mnt_sb->s_flags |= MS_BORN;
error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata);
if (error)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 9bedf4219f838..58e4b035e2825 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -209,6 +209,7 @@ struct inodes_stat_t {
#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
#define MS_I_VERSION (1<<23) /* Update inode I_version field */
#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
+#define MS_BORN (1<<29)
#define MS_ACTIVE (1<<30)
#define MS_NOUSER (1<<31)
--
GitLab
From dca332528bc69e05f67161e1ed59929633d5e63d Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 25 Jul 2010 02:31:46 +0400
Subject: [PATCH 637/863] no need for list_for_each_entry_safe()/resetting with
superblock list
just delay __put_super() a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
fs/dcache.c | 12 +++++++-----
fs/super.c | 36 +++++++++++++++++++++---------------
2 files changed, 28 insertions(+), 20 deletions(-)
diff --git a/fs/dcache.c b/fs/dcache.c
index caf08574982fc..9f2c13417969f 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -536,7 +536,7 @@ static void __shrink_dcache_sb(struct super_block *sb, int *count, int flags)
*/
static void prune_dcache(int count)
{
- struct super_block *sb, *n;
+ struct super_block *sb, *p = NULL;
int w_count;
int unused = dentry_stat.nr_unused;
int prune_ratio;
@@ -550,7 +550,7 @@ static void prune_dcache(int count)
else
prune_ratio = unused / count;
spin_lock(&sb_lock);
- list_for_each_entry_safe(sb, n, &super_blocks, s_list) {
+ list_for_each_entry(sb, &super_blocks, s_list) {
if (list_empty(&sb->s_instances))
continue;
if (sb->s_nr_dentry_unused == 0)
@@ -590,14 +590,16 @@ static void prune_dcache(int count)
up_read(&sb->s_umount);
}
spin_lock(&sb_lock);
- /* lock was dropped, must reset next */
- list_safe_reset_next(sb, n, s_list);
+ if (p)
+ __put_super(p);
count -= pruned;
- __put_super(sb);
+ p = sb;
/* more work left to do? */
if (count <= 0)
break;
}
+ if (p)
+ __put_super(p);
spin_unlock(&sb_lock);
spin_unlock(&dcache_lock);
}
diff --git a/fs/super.c b/fs/super.c
index bd9eea4bb2bbe..9674ab2c8718c 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -363,10 +363,10 @@ EXPORT_SYMBOL(drop_super);
*/
void sync_supers(void)
{
- struct super_block *sb, *n;
+ struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
- list_for_each_entry_safe(sb, n, &super_blocks, s_list) {
+ list_for_each_entry(sb, &super_blocks, s_list) {
if (list_empty(&sb->s_instances))
continue;
if (sb->s_op->write_super && sb->s_dirt) {
@@ -379,11 +379,13 @@ void sync_supers(void)
up_read(&sb->s_umount);
spin_lock(&sb_lock);
- /* lock was dropped, must reset next */
- list_safe_reset_next(sb, n, s_list);
- __put_super(sb);
+ if (p)
+ __put_super(p);
+ p = sb;
}
}
+ if (p)
+ __put_super(p);
spin_unlock(&sb_lock);
}
@@ -397,10 +399,10 @@ void sync_supers(void)
*/
void iterate_supers(void (*f)(struct super_block *, void *), void *arg)
{
- struct super_block *sb, *n;
+ struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
- list_for_each_entry_safe(sb, n, &super_blocks, s_list) {
+ list_for_each_entry(sb, &super_blocks, s_list) {
if (list_empty(&sb->s_instances))
continue;
sb->s_count++;
@@ -412,10 +414,12 @@ void iterate_supers(void (*f)(struct super_block *, void *), void *arg)
up_read(&sb->s_umount);
spin_lock(&sb_lock);
- /* lock was dropped, must reset next */
- list_safe_reset_next(sb, n, s_list);
- __put_super(sb);
+ if (p)
+ __put_super(p);
+ p = sb;
}
+ if (p)
+ __put_super(p);
spin_unlock(&sb_lock);
}
@@ -577,10 +581,10 @@ int do_remount_sb(struct super_block *sb, int flags, void *data, int force)
static void do_emergency_remount(struct work_struct *work)
{
- struct super_block *sb, *n;
+ struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
- list_for_each_entry_safe(sb, n, &super_blocks, s_list) {
+ list_for_each_entry(sb, &super_blocks, s_list) {
if (list_empty(&sb->s_instances))
continue;
sb->s_count++;
@@ -594,10 +598,12 @@ static void do_emergency_remount(struct work_struct *work)
}
up_write(&sb->s_umount);
spin_lock(&sb_lock);
- /* lock was dropped, must reset next */
- list_safe_reset_next(sb, n, s_list);
- __put_super(sb);
+ if (p)
+ __put_super(p);
+ p = sb;
}
+ if (p)
+ __put_super(p);
spin_unlock(&sb_lock);
kfree(work);
printk("Emergency Remount complete\n");
--
GitLab
From f1b50760a7e3d69ef5d62f294e51300dd206ea05 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 9 Aug 2010 10:06:47 -0700
Subject: [PATCH 638/863] Input: cy8ctmg100_ts - signedness bug
"ret" should be signed here or the error handling doesn't work.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/touchscreen/cy8ctmg110_ts.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
index 4eb7df0b7f875..5ec0946938fe7 100644
--- a/drivers/input/touchscreen/cy8ctmg110_ts.c
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -75,7 +75,7 @@ static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg,
unsigned char len, unsigned char *value)
{
struct i2c_client *client = tsc->client;
- unsigned int ret;
+ int ret;
unsigned char i2c_data[6];
BUG_ON(len > 5);
@@ -86,7 +86,7 @@ static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg,
ret = i2c_master_send(client, i2c_data, len + 1);
if (ret != 1) {
dev_err(&client->dev, "i2c write data cmd failed\n");
- return ret;
+ return ret ? ret : -EIO;
}
return 0;
@@ -96,7 +96,7 @@ static int cy8ctmg110_read_regs(struct cy8ctmg110 *tsc,
unsigned char *data, unsigned char len, unsigned char cmd)
{
struct i2c_client *client = tsc->client;
- unsigned int ret;
+ int ret;
struct i2c_msg msg[2] = {
/* first write slave position to i2c devices */
{ client->addr, 0, 1, &cmd },
--
GitLab
From 6ac8a99b906b01eaceef0057dbee4a225a32c423 Mon Sep 17 00:00:00 2001
From: Christoph Fritz <chf.fritz@googlemail.com>
Date: Mon, 9 Aug 2010 10:08:10 -0700
Subject: [PATCH 639/863] Input: xpad - add USB-ID for PL-3601 Xbox 360 pad
This patch adds USB Vendor and Product ID for Pelican PL-3601 'TSZ'
Wired Xbox 360 Controller to the device table.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/joystick/xpad.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index c41d012c88dca..97c5587fd5d90 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -148,6 +148,7 @@ static const struct xpad_device {
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
--
GitLab
From de75d60d5ea235e6e09f4962ab22541ce0fe176a Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Tue, 10 Aug 2010 12:14:27 -0400
Subject: [PATCH 640/863] block: make sure that REQ_* types are seen even with
CONFIG_BLOCK=n
These form the basis of the basic WRITE etc primitives, so we
need them to be always visible. Otherwise we see errors like:
mm/filemap.c:2164: error: 'REQ_WRITE' undeclared
fs/read_write.c:362: error: 'REQ_WRITE' undeclared
fs/splice.c:1108: error: 'REQ_WRITE' undeclared
fs/aio.c:1496: error: 'REQ_WRITE' undeclared
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
include/linux/blk_types.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 118523734af05..53691774d34e8 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -108,6 +108,8 @@ struct bio {
#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
+#endif /* CONFIG_BLOCK */
+
/*
* Request flags. For use in the cmd_flags field of struct request, and in
* bi_rw of struct bio. Note that some flags are only valid in either one.
@@ -189,5 +191,4 @@ enum rq_flag_bits {
#define REQ_IO_STAT (1 << __REQ_IO_STAT)
#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE)
-#endif /* CONFIG_BLOCK */
#endif /* __LINUX_BLK_TYPES_H */
--
GitLab
From ea5d023615948e85517ac81a7fae79429109cfa2 Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sun, 23 May 2010 21:48:24 +0200
Subject: [PATCH 641/863] n_gsm.c: removed duplicated #includes
drivers/char/n_gsm.c: linux/timer.h is included more than once.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/n_gsm.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/char/n_gsm.c b/drivers/char/n_gsm.c
index e4089c432f15f..099105e0894eb 100644
--- a/drivers/char/n_gsm.c
+++ b/drivers/char/n_gsm.c
@@ -43,7 +43,6 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
-#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/mm.h>
#include <linux/string.h>
--
GitLab
From 690b781b327a1c986c33fb2c51dd966c38222943 Mon Sep 17 00:00:00 2001
From: Christoph Egger <siccegge@cs.fau.de>
Date: Wed, 26 May 2010 15:33:43 +0200
Subject: [PATCH 642/863] serial: There's no config CONSOLE
as there's no config CONSOLE (never has been as far as I can tell) and
noone has ever missed that piece of code, it should be safe to remove
it making the kernel a tiny bit less complex.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/68328serial.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 30463862603b1..9330edb323e24 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -78,10 +78,6 @@ struct m68k_serial *m68k_consinfo = 0;
#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
-#ifdef CONFIG_CONSOLE
-extern wait_queue_head_t keypress_wait;
-#endif
-
struct tty_driver *serial_driver;
/* number of characters left in xmit buffer before we ask for more */
@@ -300,10 +296,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
return;
#endif /* CONFIG_MAGIC_SYSRQ */
}
- /* It is a 'keyboard interrupt' ;-) */
-#ifdef CONFIG_CONSOLE
- wake_up(&keypress_wait);
-#endif
}
if(!tty)
--
GitLab
From 74c807ce3d1f092fc5138c5a54019553061ecc17 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Date: Tue, 15 Jun 2010 17:24:16 +0300
Subject: [PATCH 643/863] vt: clean up the code - use kernel library
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/vt.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 44f03ddd8871a..34bfb056d7a6c 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -105,6 +105,7 @@
#include <asm/system.h>
#include <linux/uaccess.h>
#include <linux/kdb.h>
+#include <linux/ctype.h>
#define MAX_NR_CON_DRIVER 16
@@ -1796,8 +1797,8 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
vc->vc_state = ESnormal;
return;
case ESpalette:
- if ( (c>='0'&&c<='9') || (c>='A'&&c<='F') || (c>='a'&&c<='f') ) {
- vc->vc_par[vc->vc_npar++] = (c > '9' ? (c & 0xDF) - 'A' + 10 : c - '0');
+ if (isxdigit(c)) {
+ vc->vc_par[vc->vc_npar++] = hex_to_bin(c);
if (vc->vc_npar == 7) {
int i = vc->vc_par[0] * 3, j = 1;
vc->vc_palette[i] = 16 * vc->vc_par[j++];
--
GitLab
From 7a56aa45982bb87bfca98a2832b5ae782c03364a Mon Sep 17 00:00:00 2001
From: Yegor Yefremov <yegor_sub1@visionsystems.de>
Date: Wed, 16 Jun 2010 16:29:55 +0200
Subject: [PATCH 644/863] serial: add UART_CAP_EFR and UART_CAP_SLEEP flags to
16C950 UARTs definition
Adding UART_CAP_EFR and UART_CAP_SLEEP flags will enable sleep mode
and automatic CTS flow control for 16C950 UARTs. It will also avoid
capabilities detection warning like this:
"ttyS0: detected caps 00000700 should be 00000100"
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/8250.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 09ef57034c9c7..bc8ed4be90738 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -241,7 +241,7 @@ static const struct serial8250_config uart_config[] = {
.fifo_size = 128,
.tx_loadsz = 128,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
},
[PORT_16654] = {
.name = "ST16654",
--
GitLab
From 225109957a74c571c49e860fcc4e81fa6df1079d Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Wed, 16 Jun 2010 14:46:09 +0100
Subject: [PATCH 645/863] mrst_max3110: add UART driver for Max3110 on
Moorestown
This driver enable the max3110 device, it can be used as
a system console. the IRQ needs be enabled if user want a
better performance. MRST max3110 works in 3.684MHz clock,
which supports 230400 as its maximum rate.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/Kconfig | 17 +
drivers/serial/Makefile | 1 +
drivers/serial/mrst_max3110.c | 844 ++++++++++++++++++++++++++++++++++
drivers/serial/mrst_max3110.h | 59 +++
4 files changed, 921 insertions(+)
create mode 100644 drivers/serial/mrst_max3110.c
create mode 100644 drivers/serial/mrst_max3110.h
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e437ce8c1748b..964634e79c168 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -690,6 +690,23 @@ config SERIAL_SA1100_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_MRST_MAX3110
+ tristate "SPI UART driver for Max3110"
+ depends on SPI_DW_PCI
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ This is the UART protocol driver for the MAX3110 device on
+ the Intel Moorestown platform. On other systems use the max3100
+ driver.
+
+config MRST_MAX3110_IRQ
+ boolean "Enable GPIO IRQ for Max3110 over Moorestown"
+ default n
+ depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
+ help
+ This has to be enabled after Moorestown GPIO driver is loaded
+
config SERIAL_BFIN
tristate "Blackfin serial port support"
depends on BLACKFIN
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 208a85572c324..a5edb49c7303f 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -84,3 +84,4 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
+obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
new file mode 100644
index 0000000000000..273e7cbe74cde
--- /dev/null
+++ b/drivers/serial/mrst_max3110.c
@@ -0,0 +1,844 @@
+/*
+ * max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown
+ *
+ * Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/*
+ * Note:
+ * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has
+ * 1 word. If SPI master controller doesn't support sclk frequency change,
+ * then the char need be sent out one by one with some delay
+ *
+ * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE
+ * interrupt for a low speed UART device
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include <linux/kthread.h>
+#include <linux/delay.h>
+#include <asm/atomic.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/dw_spi.h>
+
+#include "mrst_max3110.h"
+
+#define PR_FMT "mrst_max3110: "
+
+struct uart_max3110 {
+ struct uart_port port;
+ struct spi_device *spi;
+ char *name;
+
+ wait_queue_head_t wq;
+ struct task_struct *main_thread;
+ struct task_struct *read_thread;
+ int mthread_up;
+ spinlock_t lock;
+
+ u32 baud;
+ u16 cur_conf;
+ u8 clock;
+ u8 parity, word_7bits;
+
+ atomic_t uart_tx_need;
+
+ /* console related */
+ struct circ_buf con_xmit;
+ atomic_t con_tx_need;
+
+ /* irq related */
+ u16 irq;
+ atomic_t irq_pending;
+};
+
+/* global data structure, may need be removed */
+struct uart_max3110 *pmax;
+static inline void receive_char(struct uart_max3110 *max, u8 ch);
+static void receive_chars(struct uart_max3110 *max,
+ unsigned char *str, int len);
+static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf);
+static void max3110_console_receive(struct uart_max3110 *max);
+
+int max3110_write_then_read(struct uart_max3110 *max,
+ const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast)
+{
+ struct spi_device *spi = max->spi;
+ struct spi_message message;
+ struct spi_transfer x;
+ int ret;
+
+ if (!txbuf || !rxbuf)
+ return -EINVAL;
+
+ spi_message_init(&message);
+ memset(&x, 0, sizeof x);
+ x.len = len;
+ x.tx_buf = txbuf;
+ x.rx_buf = rxbuf;
+ spi_message_add_tail(&x, &message);
+
+ if (always_fast)
+ x.speed_hz = 3125000;
+ else if (max->baud)
+ x.speed_hz = max->baud;
+
+ /* Do the i/o */
+ ret = spi_sync(spi, &message);
+ return ret;
+}
+
+/* Write a u16 to the device, and return one u16 read back */
+int max3110_out(struct uart_max3110 *max, const u16 out)
+{
+ u16 tmp;
+ int ret;
+
+ ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
+ if (ret)
+ return ret;
+
+ /* If some valid data is read back */
+ if (tmp & MAX3110_READ_DATA_AVAILABLE)
+ receive_char(max, (tmp & 0xff));
+
+ return ret;
+}
+
+#define MAX_READ_LEN 20
+/*
+ * This is usually used to read data from SPIC RX FIFO, which doesn't
+ * need any delay like flushing character out. It returns how many
+ * valide bytes are read back
+ */
+static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
+{
+ u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
+ u8 *pbuf, valid_str[MAX_READ_LEN];
+ int i, j, bytelen;
+
+ if (len > MAX_READ_LEN) {
+ pr_err(PR_FMT "read len %d is too large\n", len);
+ return 0;
+ }
+
+ bytelen = len * 2;
+ memset(out, 0, bytelen);
+ memset(in, 0, bytelen);
+
+ if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
+ return 0;
+
+ /* If caller don't provide a buffer, then handle received char */
+ pbuf = buf ? buf : valid_str;
+
+ for (i = 0, j = 0; i < len; i++) {
+ if (in[i] & MAX3110_READ_DATA_AVAILABLE)
+ pbuf[j++] = (u8)(in[i] & 0xff);
+ }
+
+ if (j && (pbuf == valid_str))
+ receive_chars(max, valid_str, j);
+
+ return j;
+}
+
+static void serial_m3110_con_putchar(struct uart_port *port, int ch)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ struct circ_buf *xmit = &max->con_xmit;
+
+ if (uart_circ_chars_free(xmit)) {
+ xmit->buf[xmit->head] = (char)ch;
+ xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
+ }
+
+ if (!atomic_read(&max->con_tx_need)) {
+ atomic_set(&max->con_tx_need, 1);
+ wake_up_process(max->main_thread);
+ }
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void serial_m3110_con_write(struct console *co,
+ const char *s, unsigned int count)
+{
+ if (!pmax)
+ return;
+
+ uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
+}
+
+static int __init
+serial_m3110_con_setup(struct console *co, char *options)
+{
+ struct uart_max3110 *max = pmax;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ pr_info(PR_FMT "setting up console\n");
+
+ if (!max) {
+ pr_err(PR_FMT "pmax is NULL, return");
+ return -ENODEV;
+ }
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&max->port, co, baud, parity, bits, flow);
+}
+
+static struct tty_driver *serial_m3110_con_device(struct console *co,
+ int *index)
+{
+ struct uart_driver *p = co->data;
+ *index = co->index;
+ return p->tty_driver;
+}
+
+static struct uart_driver serial_m3110_reg;
+static struct console serial_m3110_console = {
+ .name = "ttyS",
+ .write = serial_m3110_con_write,
+ .device = serial_m3110_con_device,
+ .setup = serial_m3110_con_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial_m3110_reg,
+};
+
+#define MRST_CONSOLE (&serial_m3110_console)
+
+static unsigned int serial_m3110_tx_empty(struct uart_port *port)
+{
+ return 1;
+}
+
+static void serial_m3110_stop_tx(struct uart_port *port)
+{
+ return;
+}
+
+/* stop_rx will be called in spin_lock env */
+static void serial_m3110_stop_rx(struct uart_port *port)
+{
+ return;
+}
+
+#define WORDS_PER_XFER 128
+static inline void send_circ_buf(struct uart_max3110 *max,
+ struct circ_buf *xmit)
+{
+ int len, left = 0;
+ u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
+ u8 valid_str[WORDS_PER_XFER];
+ int i, j;
+
+ while (!uart_circ_empty(xmit)) {
+ left = uart_circ_chars_pending(xmit);
+ while (left) {
+ len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
+
+ memset(obuf, 0, len * 2);
+ memset(ibuf, 0, len * 2);
+ for (i = 0; i < len; i++) {
+ obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
+ xmit->tail = (xmit->tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ }
+ max3110_write_then_read(max, (u8 *)obuf,
+ (u8 *)ibuf, len * 2, 0);
+
+ for (i = 0, j = 0; i < len; i++) {
+ if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
+ valid_str[j++] = (u8)(ibuf[i] & 0xff);
+ }
+
+ if (j)
+ receive_chars(max, valid_str, j);
+
+ max->port.icount.tx += len;
+ left -= len;
+ }
+ }
+}
+
+static void transmit_char(struct uart_max3110 *max)
+{
+ struct uart_port *port = &max->port;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ return;
+
+ send_circ_buf(max, xmit);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ serial_m3110_stop_tx(port);
+}
+
+/* This will be called by uart_write() and tty_write, can't
+ * go to sleep */
+static void serial_m3110_start_tx(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+
+ if (!atomic_read(&max->uart_tx_need)) {
+ atomic_set(&max->uart_tx_need, 1);
+ wake_up_process(max->main_thread);
+ }
+}
+
+static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
+{
+ struct uart_port *port = &max->port;
+ struct tty_struct *tty;
+ int usable;
+
+ /* If uart is not opened, just return */
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return; /* receive some char before the tty is opened */
+
+ while (len) {
+ usable = tty_buffer_request_room(tty, len);
+ if (usable) {
+ tty_insert_flip_string(tty, str, usable);
+ str += usable;
+ port->icount.rx += usable;
+ tty_flip_buffer_push(tty);
+ }
+ len -= usable;
+ }
+}
+
+static inline void receive_char(struct uart_max3110 *max, u8 ch)
+{
+ receive_chars(max, &ch, 1);
+}
+
+static void max3110_console_receive(struct uart_max3110 *max)
+{
+ int loop = 1, num, total = 0;
+ u8 recv_buf[512], *pbuf;
+
+ pbuf = recv_buf;
+ do {
+ num = max3110_read_multi(max, 8, pbuf);
+
+ if (num) {
+ loop = 10;
+ pbuf += num;
+ total += num;
+
+ if (total >= 500) {
+ receive_chars(max, recv_buf, total);
+ pbuf = recv_buf;
+ total = 0;
+ }
+ }
+ } while (--loop);
+
+ if (total)
+ receive_chars(max, recv_buf, total);
+}
+
+static int max3110_main_thread(void *_max)
+{
+ struct uart_max3110 *max = _max;
+ wait_queue_head_t *wq = &max->wq;
+ int ret = 0;
+ struct circ_buf *xmit = &max->con_xmit;
+
+ init_waitqueue_head(wq);
+ pr_info(PR_FMT "start main thread\n");
+
+ do {
+ wait_event_interruptible(*wq, (atomic_read(&max->irq_pending) ||
+ atomic_read(&max->con_tx_need) ||
+ atomic_read(&max->uart_tx_need)) ||
+ kthread_should_stop());
+ max->mthread_up = 1;
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+ if (atomic_read(&max->irq_pending)) {
+ max3110_console_receive(max);
+ atomic_set(&max->irq_pending, 0);
+ }
+#endif
+
+ /* first handle console output */
+ if (atomic_read(&max->con_tx_need)) {
+ send_circ_buf(max, xmit);
+ atomic_set(&max->con_tx_need, 0);
+ }
+
+ /* handle uart output */
+ if (atomic_read(&max->uart_tx_need)) {
+ transmit_char(max);
+ atomic_set(&max->uart_tx_need, 0);
+ }
+ max->mthread_up = 0;
+ } while (!kthread_should_stop());
+
+ return ret;
+}
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
+{
+ struct uart_max3110 *max = dev_id;
+
+ /* max3110's irq is a falling edge, not level triggered,
+ * so no need to disable the irq */
+ if (!atomic_read(&max->irq_pending)) {
+ atomic_inc(&max->irq_pending);
+ wake_up_process(max->main_thread);
+ }
+ return IRQ_HANDLED;
+}
+#else
+/* if don't use RX IRQ, then need a thread to polling read */
+static int max3110_read_thread(void *_max)
+{
+ struct uart_max3110 *max = _max;
+
+ pr_info(PR_FMT "start read thread\n");
+ do {
+ if (!max->mthread_up)
+ max3110_console_receive(max);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ / 20);
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+#endif
+
+static int serial_m3110_startup(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ u16 config = 0;
+ int ret = 0;
+
+ if (port->line != 0)
+ pr_err(PR_FMT "uart port startup failed\n");
+
+ /* firstly disable all IRQ and config it to 115200, 8n1 */
+ config = WC_TAG | WC_FIFO_ENABLE
+ | WC_1_STOPBITS
+ | WC_8BIT_WORD
+ | WC_BAUD_DR2;
+ ret = max3110_out(max, config);
+
+ /* as we use thread to handle tx/rx, need set low latency */
+ port->state->port.tty->low_latency = 1;
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+ ret = request_irq(max->irq, serial_m3110_irq,
+ IRQ_TYPE_EDGE_FALLING, "max3110", max);
+ if (ret)
+ return ret;
+
+ /* enable RX IRQ only */
+ config |= WC_RXA_IRQ_ENABLE;
+ max3110_out(max, config);
+#else
+ /* if IRQ is disabled, start a read thread for input data */
+ max->read_thread =
+ kthread_run(max3110_read_thread, max, "max3110_read");
+#endif
+
+ max->cur_conf = config;
+ return 0;
+}
+
+static void serial_m3110_shutdown(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ u16 config;
+
+ if (max->read_thread) {
+ kthread_stop(max->read_thread);
+ max->read_thread = NULL;
+ }
+
+#ifdef CONFIG_MRST_MAX3110_IRQ
+ free_irq(max->irq, max);
+#endif
+
+ /* Disable interrupts from this port */
+ config = WC_TAG | WC_SW_SHDI;
+ max3110_out(max, config);
+}
+
+static void serial_m3110_release_port(struct uart_port *port)
+{
+}
+
+static int serial_m3110_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_m3110_config_port(struct uart_port *port, int flags)
+{
+ /* give it fake type */
+ port->type = PORT_PXA;
+}
+
+static int
+serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* we don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+
+static const char *serial_m3110_type(struct uart_port *port)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ return max->name;
+}
+
+static void
+serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_max3110 *max =
+ container_of(port, struct uart_max3110, port);
+ unsigned char cval;
+ unsigned int baud, parity = 0;
+ int clk_div = -1;
+ u16 new_conf = max->cur_conf;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ new_conf |= WC_7BIT_WORD;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ new_conf |= WC_8BIT_WORD;
+ break;
+ }
+
+ baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+
+ /* first calc the div for 1.8MHZ clock case */
+ switch (baud) {
+ case 300:
+ clk_div = WC_BAUD_DR384;
+ break;
+ case 600:
+ clk_div = WC_BAUD_DR192;
+ break;
+ case 1200:
+ clk_div = WC_BAUD_DR96;
+ break;
+ case 2400:
+ clk_div = WC_BAUD_DR48;
+ break;
+ case 4800:
+ clk_div = WC_BAUD_DR24;
+ break;
+ case 9600:
+ clk_div = WC_BAUD_DR12;
+ break;
+ case 19200:
+ clk_div = WC_BAUD_DR6;
+ break;
+ case 38400:
+ clk_div = WC_BAUD_DR3;
+ break;
+ case 57600:
+ clk_div = WC_BAUD_DR2;
+ break;
+ case 115200:
+ clk_div = WC_BAUD_DR1;
+ break;
+ case 230400:
+ if (max->clock & MAX3110_HIGH_CLK)
+ break;
+ default:
+ /* pick the previous baud rate */
+ baud = max->baud;
+ clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ }
+
+ if (max->clock & MAX3110_HIGH_CLK) {
+ clk_div += 1;
+ /* high clk version max3110 doesn't support B300 */
+ if (baud == 300)
+ baud = 600;
+ if (baud == 230400)
+ clk_div = WC_BAUD_DR1;
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ }
+
+ new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
+ if (termios->c_cflag & CSTOPB)
+ new_conf |= WC_2_STOPBITS;
+ else
+ new_conf &= ~WC_2_STOPBITS;
+
+ if (termios->c_cflag & PARENB) {
+ new_conf |= WC_PARITY_ENABLE;
+ parity |= UART_LCR_PARITY;
+ } else
+ new_conf &= ~WC_PARITY_ENABLE;
+
+ if (!(termios->c_cflag & PARODD))
+ parity |= UART_LCR_EPAR;
+ max->parity = parity;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ new_conf |= WC_TAG;
+ if (new_conf != max->cur_conf) {
+ max3110_out(max, new_conf);
+ max->cur_conf = new_conf;
+ max->baud = baud;
+ }
+}
+
+/* don't handle hw handshaking */
+static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
+}
+
+static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void serial_m3110_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static void serial_m3110_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+}
+
+static void serial_m3110_enable_ms(struct uart_port *port)
+{
+}
+
+struct uart_ops serial_m3110_ops = {
+ .tx_empty = serial_m3110_tx_empty,
+ .set_mctrl = serial_m3110_set_mctrl,
+ .get_mctrl = serial_m3110_get_mctrl,
+ .stop_tx = serial_m3110_stop_tx,
+ .start_tx = serial_m3110_start_tx,
+ .stop_rx = serial_m3110_stop_rx,
+ .enable_ms = serial_m3110_enable_ms,
+ .break_ctl = serial_m3110_break_ctl,
+ .startup = serial_m3110_startup,
+ .shutdown = serial_m3110_shutdown,
+ .set_termios = serial_m3110_set_termios, /* must have */
+ .pm = serial_m3110_pm,
+ .type = serial_m3110_type,
+ .release_port = serial_m3110_release_port,
+ .request_port = serial_m3110_request_port,
+ .config_port = serial_m3110_config_port,
+ .verify_port = serial_m3110_verify_port,
+};
+
+static struct uart_driver serial_m3110_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "MRST serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = 1,
+ .cons = MRST_CONSOLE,
+};
+
+static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
+{
+ return 0;
+}
+
+static int serial_m3110_resume(struct spi_device *spi)
+{
+ return 0;
+}
+
+static struct dw_spi_chip spi0_uart = {
+ .poll_mode = 1,
+ .enable_dma = 0,
+ .type = SPI_FRF_SPI,
+};
+
+static int serial_m3110_probe(struct spi_device *spi)
+{
+ struct uart_max3110 *max;
+ int ret;
+ unsigned char *buffer;
+
+ max = kzalloc(sizeof(*max), GFP_KERNEL);
+ if (!max)
+ return -ENOMEM;
+
+ /* set spi info */
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 16;
+ max->clock = MAX3110_HIGH_CLK;
+ spi->controller_data = &spi0_uart;
+
+ spi_setup(spi);
+
+ max->port.type = PORT_PXA; /* need apply for a max3110 type */
+ max->port.fifosize = 2; /* only have 16b buffer */
+ max->port.ops = &serial_m3110_ops;
+ max->port.line = 0;
+ max->port.dev = &spi->dev;
+ max->port.uartclk = 115200;
+
+ max->spi = spi;
+ max->name = spi->modalias; /* use spi name as the name */
+ max->irq = (u16)spi->irq;
+
+ spin_lock_init(&max->lock);
+
+ max->word_7bits = 0;
+ max->parity = 0;
+ max->baud = 0;
+
+ max->cur_conf = 0;
+ atomic_set(&max->irq_pending, 0);
+
+ buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
+ if (!buffer) {
+ ret = -ENOMEM;
+ goto err_get_page;
+ }
+ max->con_xmit.buf = (unsigned char *)buffer;
+ max->con_xmit.head = max->con_xmit.tail = 0;
+
+ max->main_thread = kthread_run(max3110_main_thread,
+ max, "max3110_main");
+ if (IS_ERR(max->main_thread)) {
+ ret = PTR_ERR(max->main_thread);
+ goto err_kthread;
+ }
+
+ pmax = max;
+ /* give membase a psudo value to pass serial_core's check */
+ max->port.membase = (void *)0xff110000;
+ uart_add_one_port(&serial_m3110_reg, &max->port);
+
+ return 0;
+
+err_kthread:
+ free_page((unsigned long)buffer);
+err_get_page:
+ pmax = NULL;
+ kfree(max);
+ return ret;
+}
+
+static int max3110_remove(struct spi_device *dev)
+{
+ struct uart_max3110 *max = pmax;
+
+ if (!pmax)
+ return 0;
+
+ pmax = NULL;
+ uart_remove_one_port(&serial_m3110_reg, &max->port);
+
+ free_page((unsigned long)max->con_xmit.buf);
+
+ if (max->main_thread)
+ kthread_stop(max->main_thread);
+
+ kfree(max);
+ return 0;
+}
+
+static struct spi_driver uart_max3110_driver = {
+ .driver = {
+ .name = "spi_max3111",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = serial_m3110_probe,
+ .remove = __devexit_p(max3110_remove),
+ .suspend = serial_m3110_suspend,
+ .resume = serial_m3110_resume,
+};
+
+
+int __init serial_m3110_init(void)
+{
+ int ret = 0;
+
+ ret = uart_register_driver(&serial_m3110_reg);
+ if (ret)
+ return ret;
+
+ ret = spi_register_driver(&uart_max3110_driver);
+ if (ret)
+ uart_unregister_driver(&serial_m3110_reg);
+
+ return ret;
+}
+
+void __exit serial_m3110_exit(void)
+{
+ spi_unregister_driver(&uart_max3110_driver);
+ uart_unregister_driver(&serial_m3110_reg);
+}
+
+module_init(serial_m3110_init);
+module_exit(serial_m3110_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("max3110-uart");
diff --git a/drivers/serial/mrst_max3110.h b/drivers/serial/mrst_max3110.h
new file mode 100644
index 0000000000000..363478acb2c35
--- /dev/null
+++ b/drivers/serial/mrst_max3110.h
@@ -0,0 +1,59 @@
+#ifndef _MRST_MAX3110_H
+#define _MRST_MAX3110_H
+
+#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */
+#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */
+
+/* status bits for all 4 MAX3110 operate modes */
+#define MAX3110_READ_DATA_AVAILABLE (1 << 15)
+#define MAX3110_WRITE_BUF_EMPTY (1 << 14)
+
+#define WC_TAG (3 << 14)
+#define RC_TAG (1 << 14)
+#define WD_TAG (2 << 14)
+#define RD_TAG (0 << 14)
+
+/* bits def for write configuration */
+#define WC_FIFO_ENABLE_MASK (1 << 13)
+#define WC_FIFO_ENABLE (0 << 13)
+
+#define WC_SW_SHDI (1 << 12)
+
+#define WC_IRQ_MASK (0xF << 8)
+#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */
+#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */
+#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9)
+#define WC_REC_ACT_IRQ_ENABLE (1 << 8)
+
+#define WC_IRDA_ENABLE (1 << 7)
+
+#define WC_STOPBITS_MASK (1 << 6)
+#define WC_2_STOPBITS (1 << 6)
+#define WC_1_STOPBITS (0 << 6)
+
+#define WC_PARITY_ENABLE_MASK (1 << 5)
+#define WC_PARITY_ENABLE (1 << 5)
+
+#define WC_WORDLEN_MASK (1 << 4)
+#define WC_7BIT_WORD (1 << 4)
+#define WC_8BIT_WORD (0 << 4)
+
+#define WC_BAUD_DIV_MASK (0xF)
+#define WC_BAUD_DR1 (0x0)
+#define WC_BAUD_DR2 (0x1)
+#define WC_BAUD_DR4 (0x2)
+#define WC_BAUD_DR8 (0x3)
+#define WC_BAUD_DR16 (0x4)
+#define WC_BAUD_DR32 (0x5)
+#define WC_BAUD_DR64 (0x6)
+#define WC_BAUD_DR128 (0x7)
+#define WC_BAUD_DR3 (0x8)
+#define WC_BAUD_DR6 (0x9)
+#define WC_BAUD_DR12 (0xA)
+#define WC_BAUD_DR24 (0xB)
+#define WC_BAUD_DR48 (0xC)
+#define WC_BAUD_DR96 (0xD)
+#define WC_BAUD_DR192 (0xE)
+#define WC_BAUD_DR384 (0xF)
+
+#endif
--
GitLab
From 99dd3f6b7e2ef5179f67503a401a99141708687a Mon Sep 17 00:00:00 2001
From: "jianwei.yang" <jianwei.yang@intel.com>
Date: Wed, 16 Jun 2010 14:46:49 +0100
Subject: [PATCH 646/863] max3110 sanity check a register
MAX3111 is the SPI/UART IC installed on the MRST SPI Port Card as a serial
debug goal, and the SPI Port Card will be frequently mounted and unmounted
from the main board by developers depending whether debug serial is
required or not.
As the MAX3111 has no subvendor or product id registers available, the patch
will try to access one register to decide if this IC is present or not.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/mrst_max3110.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
index 273e7cbe74cde..f9c01aeb6f80f 100644
--- a/drivers/serial/mrst_max3110.c
+++ b/drivers/serial/mrst_max3110.c
@@ -721,7 +721,7 @@ static int serial_m3110_probe(struct spi_device *spi)
struct uart_max3110 *max;
int ret;
unsigned char *buffer;
-
+ u16 res;
max = kzalloc(sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
@@ -753,7 +753,16 @@ static int serial_m3110_probe(struct spi_device *spi)
max->cur_conf = 0;
atomic_set(&max->irq_pending, 0);
-
+ /* Check if reading configuration register returns something sane */
+
+ res = RC_TAG;
+ ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
+ if (ret < 0 || res == 0 || res == 0xffff) {
+ printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)",
+ res);
+ ret = -ENODEV;
+ goto err_get_page;
+ }
buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
--
GitLab
From 68c16b4117cc746a91897d629b61e5f2af18c225 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Thu, 17 Jun 2010 11:02:06 +0100
Subject: [PATCH 647/863] serial: replace open coded mutex with a real mutex in
mrst_max3110.c
The mrst_max3110.c driver uses an open coded, non atomic variable
to create exclusion between two of its worker threads. More than that,
while the main thread does a proper set-work-clear sequence,
the other thread only does a test, with the result that no actual
exclusion is happening.
this patch replaces this open coded variable with a proper mutex
in addition, the 'lock' spinlock is removed from the per adapter structure,
the lock was only ever initialized but never used
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/mrst_max3110.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
index f9c01aeb6f80f..0341853e0c285 100644
--- a/drivers/serial/mrst_max3110.c
+++ b/drivers/serial/mrst_max3110.c
@@ -56,8 +56,7 @@ struct uart_max3110 {
wait_queue_head_t wq;
struct task_struct *main_thread;
struct task_struct *read_thread;
- int mthread_up;
- spinlock_t lock;
+ struct mutex thread_mutex;;
u32 baud;
u16 cur_conf;
@@ -397,7 +396,8 @@ static int max3110_main_thread(void *_max)
atomic_read(&max->con_tx_need) ||
atomic_read(&max->uart_tx_need)) ||
kthread_should_stop());
- max->mthread_up = 1;
+
+ mutex_lock(&max->thread_mutex);
#ifdef CONFIG_MRST_MAX3110_IRQ
if (atomic_read(&max->irq_pending)) {
@@ -417,7 +417,7 @@ static int max3110_main_thread(void *_max)
transmit_char(max);
atomic_set(&max->uart_tx_need, 0);
}
- max->mthread_up = 0;
+ mutex_unlock(&max->thread_mutex);
} while (!kthread_should_stop());
return ret;
@@ -444,8 +444,9 @@ static int max3110_read_thread(void *_max)
pr_info(PR_FMT "start read thread\n");
do {
- if (!max->mthread_up)
- max3110_console_receive(max);
+ mutex_lock(&max->thread_mutex);
+ max3110_console_receive(max);
+ mutex_unlock(&max->thread_mutex);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ / 20);
@@ -745,7 +746,7 @@ static int serial_m3110_probe(struct spi_device *spi)
max->name = spi->modalias; /* use spi name as the name */
max->irq = (u16)spi->irq;
- spin_lock_init(&max->lock);
+ mutex_init(&max->thread_mutex);
max->word_7bits = 0;
max->parity = 0;
--
GitLab
From d6e679b474c096f1125087e789e7af8886de39d3 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Thu, 17 Jun 2010 11:02:15 +0100
Subject: [PATCH 648/863] serial: fix wakup races in the mrst_max3110 driver
The mrst_max3110 driver had a set of unsafe wakeup sequences
along the following line:
if (!atomic_read(&foo)) {
atomic_set(&foo, 1);
wake_up(worker_thread);
}
and the worker thread would do
if (atomic_read(&foo)) {
do_work();
atomic_set(&foo, 0);
}
which can result in various missed wakups due to test-then-set races,
as well as due to clear-after-work instead of clear-before-work.
This patch fixes these races by using the proper bit test-and-set operations,
and by doing clear-before-work.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/mrst_max3110.c | 46 ++++++++++++++---------------------
1 file changed, 18 insertions(+), 28 deletions(-)
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
index 0341853e0c285..f6ad1ecbff79e 100644
--- a/drivers/serial/mrst_max3110.c
+++ b/drivers/serial/mrst_max3110.c
@@ -48,6 +48,10 @@
#define PR_FMT "mrst_max3110: "
+#define UART_TX_NEEDED 1
+#define CON_TX_NEEDED 2
+#define BIT_IRQ_PENDING 3
+
struct uart_max3110 {
struct uart_port port;
struct spi_device *spi;
@@ -63,15 +67,13 @@ struct uart_max3110 {
u8 clock;
u8 parity, word_7bits;
- atomic_t uart_tx_need;
+ unsigned long uart_flags;
/* console related */
struct circ_buf con_xmit;
- atomic_t con_tx_need;
/* irq related */
u16 irq;
- atomic_t irq_pending;
};
/* global data structure, may need be removed */
@@ -176,10 +178,9 @@ static void serial_m3110_con_putchar(struct uart_port *port, int ch)
xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
}
- if (!atomic_read(&max->con_tx_need)) {
- atomic_set(&max->con_tx_need, 1);
+
+ if (!test_and_set_bit(CON_TX_NEEDED, &max->uart_flags))
wake_up_process(max->main_thread);
- }
}
/*
@@ -318,10 +319,8 @@ static void serial_m3110_start_tx(struct uart_port *port)
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
- if (!atomic_read(&max->uart_tx_need)) {
- atomic_set(&max->uart_tx_need, 1);
+ if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags))
wake_up_process(max->main_thread);
- }
}
static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
@@ -392,32 +391,23 @@ static int max3110_main_thread(void *_max)
pr_info(PR_FMT "start main thread\n");
do {
- wait_event_interruptible(*wq, (atomic_read(&max->irq_pending) ||
- atomic_read(&max->con_tx_need) ||
- atomic_read(&max->uart_tx_need)) ||
- kthread_should_stop());
+ wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop());
mutex_lock(&max->thread_mutex);
-#ifdef CONFIG_MRST_MAX3110_IRQ
- if (atomic_read(&max->irq_pending)) {
+ if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
max3110_console_receive(max);
- atomic_set(&max->irq_pending, 0);
- }
-#endif
/* first handle console output */
- if (atomic_read(&max->con_tx_need)) {
+ if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
send_circ_buf(max, xmit);
- atomic_set(&max->con_tx_need, 0);
- }
/* handle uart output */
- if (atomic_read(&max->uart_tx_need)) {
+ if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags))
transmit_char(max);
- atomic_set(&max->uart_tx_need, 0);
- }
+
mutex_unlock(&max->thread_mutex);
+
} while (!kthread_should_stop());
return ret;
@@ -430,10 +420,9 @@ static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
/* max3110's irq is a falling edge, not level triggered,
* so no need to disable the irq */
- if (!atomic_read(&max->irq_pending)) {
- atomic_inc(&max->irq_pending);
+ if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags))
wake_up_process(max->main_thread);
- }
+
return IRQ_HANDLED;
}
#else
@@ -753,7 +742,8 @@ static int serial_m3110_probe(struct spi_device *spi)
max->baud = 0;
max->cur_conf = 0;
- atomic_set(&max->irq_pending, 0);
+ max->uart_flags = 0;
+
/* Check if reading configuration register returns something sane */
res = RC_TAG;
--
GitLab
From 39e5322c074f895b5b5c657a312c56b6c6154a38 Mon Sep 17 00:00:00 2001
From: Jeff Dike <jdike@addtoit.com>
Date: Thu, 17 Jun 2010 15:15:16 -0400
Subject: [PATCH 649/863] tty: Remove Hayes ESP ioctls
Remove Hayes ESP ioctls
The Hayes ESP driver has been removed from the tree:
commit f53a2ade0bb9f2a81f473e6469155172a96b7c38
("tty: esp: remove broken driver")
so its ioctls aren't needed any more.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
include/asm-generic/ioctls.h | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
index a799e20a769e7..1375fa1a7a4db 100644
--- a/include/asm-generic/ioctls.h
+++ b/include/asm-generic/ioctls.h
@@ -87,12 +87,10 @@
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
/*
- * some architectures define FIOQSIZE as 0x545E, which is used for
- * TIOCGHAYESESP on others
+ * Some arches already define FIOQSIZE due to a historical
+ * conflict with a Hayes modem-specific ioctl value.
*/
#ifndef FIOQSIZE
-# define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-# define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
# define FIOQSIZE 0x5460
#endif
--
GitLab
From a3c8ed693da9782f924223f65da9261da796e49b Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 17 Jun 2010 13:16:08 -0700
Subject: [PATCH 650/863] tty: remove remaining Hayes ESP ioctls
As Jeff Dike pointed out, the Hayes ESP driver was removed in commit
f53a2ade0bb9f2a81f473e6469155172a96b7c38, so these ioctl definitions
should also be removed. This cleans up the remaining arch-specific
locations of this ioctl value.
Thanks to Arnd for pointing these out.
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
arch/alpha/include/asm/ioctls.h | 2 --
arch/avr32/include/asm/ioctls.h | 2 --
arch/cris/include/asm/ioctls.h | 2 --
arch/ia64/include/asm/ioctls.h | 2 --
arch/m32r/include/asm/ioctls.h | 2 --
arch/mips/include/asm/ioctls.h | 2 --
arch/mn10300/include/asm/ioctls.h | 2 --
arch/parisc/include/asm/ioctls.h | 2 --
8 files changed, 16 deletions(-)
diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h
index 67bb9f6fdbe45..c7b0cc61ce5b0 100644
--- a/arch/alpha/include/asm/ioctls.h
+++ b/arch/alpha/include/asm/ioctls.h
@@ -106,7 +106,5 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#endif /* _ASM_ALPHA_IOCTLS_H */
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index e6ac0b6610763..143dafb3997ef 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -72,8 +72,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h
index 076c07824eb6f..bb49142dc6aba 100644
--- a/arch/cris/include/asm/ioctls.h
+++ b/arch/cris/include/asm/ioctls.h
@@ -70,8 +70,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/asm/ioctls.h
index f41b636a0bf6d..f0ee86c0b5f77 100644
--- a/arch/ia64/include/asm/ioctls.h
+++ b/arch/ia64/include/asm/ioctls.h
@@ -75,8 +75,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
diff --git a/arch/m32r/include/asm/ioctls.h b/arch/m32r/include/asm/ioctls.h
index b9f54bb5d7cfb..f4c13a52fe486 100644
--- a/arch/m32r/include/asm/ioctls.h
+++ b/arch/m32r/include/asm/ioctls.h
@@ -69,8 +69,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h
index 3f04a995ec545..2fb9e1693bf7e 100644
--- a/arch/mips/include/asm/ioctls.h
+++ b/arch/mips/include/asm/ioctls.h
@@ -103,7 +103,5 @@
#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */
#endif /* __ASM_IOCTLS_H */
diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h
index dcbfb452974fe..638219a99b1e0 100644
--- a/arch/mn10300/include/asm/ioctls.h
+++ b/arch/mn10300/include/asm/ioctls.h
@@ -70,8 +70,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
/* Used for packet mode */
diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h
index 6747fad07a3ec..6cc497e525320 100644
--- a/arch/parisc/include/asm/ioctls.h
+++ b/arch/parisc/include/asm/ioctls.h
@@ -68,8 +68,6 @@
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460 /* Get exact space used by quota */
#define TIOCSTART 0x5461
--
GitLab
From 26df6d13406d1a53b0bda08bd712f1924affd7cd Mon Sep 17 00:00:00 2001
From: "hyc@symas.com" <hyc@symas.com>
Date: Tue, 22 Jun 2010 10:14:49 -0700
Subject: [PATCH 651/863] tty: Add EXTPROC support for LINEMODE
This patch is against the 2.6.34 source.
Paraphrased from the 1989 BSD patch by David Borman @ cray.com:
These are the changes needed for the kernel to support
LINEMODE in the server.
There is a new bit in the termios local flag word, EXTPROC.
When this bit is set, several aspects of the terminal driver
are disabled. Input line editing, character echo, and mapping
of signals are all disabled. This allows the telnetd to turn
off these functions when in linemode, but still keep track of
what state the user wants the terminal to be in.
New ioctl:
TIOCSIG Generate a signal to processes in the
current process group of the pty.
There is a new mode for packet driver, the TIOCPKT_IOCTL bit.
When packet mode is turned on in the pty, and the EXTPROC bit
is set, then whenever the state of the pty is changed, the
next read on the master side of the pty will have the TIOCPKT_IOCTL
bit set. This allows the process on the server side of the pty
to know when the state of the terminal has changed; it can then
issue the appropriate ioctl to retrieve the new state.
Since the original BSD patches accompanied the source code for telnet
I've left that reference here, but obviously the feature is useful for
any remote terminal protocol, including ssh.
The corresponding feature has existed in the BSD tty driver since 1989.
For historical reference, a good copy of the relevant files can be found
here:
http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741
Signed-off-by: Howard Chu <hyc@symas.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
arch/alpha/include/asm/ioctls.h | 2 ++
arch/alpha/include/asm/termbits.h | 1 +
arch/arm/include/asm/ioctls.h | 2 ++
arch/arm/include/asm/termbits.h | 1 +
arch/avr32/include/asm/ioctls.h | 2 ++
arch/avr32/include/asm/termbits.h | 1 +
arch/cris/include/asm/ioctls.h | 2 ++
arch/cris/include/asm/termbits.h | 1 +
arch/frv/include/asm/ioctls.h | 2 ++
arch/frv/include/asm/termbits.h | 1 +
arch/h8300/include/asm/ioctls.h | 2 ++
arch/h8300/include/asm/termbits.h | 1 +
arch/ia64/include/asm/ioctls.h | 2 ++
arch/ia64/include/asm/termbits.h | 1 +
arch/m32r/include/asm/ioctls.h | 2 ++
arch/m32r/include/asm/termbits.h | 1 +
arch/m68k/include/asm/ioctls.h | 2 ++
arch/m68k/include/asm/termbits.h | 1 +
arch/mips/include/asm/ioctls.h | 3 ++-
arch/mips/include/asm/termbits.h | 1 +
arch/mn10300/include/asm/ioctls.h | 2 ++
arch/mn10300/include/asm/termbits.h | 1 +
arch/parisc/include/asm/ioctls.h | 2 ++
arch/parisc/include/asm/termbits.h | 1 +
arch/powerpc/include/asm/ioctls.h | 2 ++
arch/powerpc/include/asm/termbits.h | 1 +
arch/s390/include/asm/ioctls.h | 2 ++
arch/sh/include/asm/ioctls.h | 2 ++
arch/sparc/include/asm/ioctls.h | 2 ++
arch/sparc/include/asm/termbits.h | 1 +
arch/xtensa/include/asm/ioctls.h | 2 ++
arch/xtensa/include/asm/termbits.h | 1 +
drivers/char/n_tty.c | 17 ++++++++++++++---
drivers/char/pty.c | 21 +++++++++++++++++++++
drivers/char/tty_ioctl.c | 18 ++++++++++++------
fs/compat_ioctl.c | 1 +
include/asm-generic/ioctls.h | 2 ++
include/asm-generic/termbits.h | 1 +
include/linux/tty.h | 1 +
39 files changed, 101 insertions(+), 10 deletions(-)
diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h
index c7b0cc61ce5b0..59617c3c2be6a 100644
--- a/arch/alpha/include/asm/ioctls.h
+++ b/arch/alpha/include/asm/ioctls.h
@@ -80,6 +80,7 @@
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
#define TIOCNOTTY 0x5422
@@ -91,6 +92,7 @@
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
diff --git a/arch/alpha/include/asm/termbits.h b/arch/alpha/include/asm/termbits.h
index ad854a4a3af63..879dd35899218 100644
--- a/arch/alpha/include/asm/termbits.h
+++ b/arch/alpha/include/asm/termbits.h
@@ -180,6 +180,7 @@ struct ktermios {
#define FLUSHO 0x00800000
#define PENDIN 0x20000000
#define IEXTEN 0x00000400
+#define EXTPROC 0x10000000
/* Values for the ACTION argument to `tcflow'. */
#define TCOOFF 0
diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
index 7f0b6d13296a4..0b30894b5482a 100644
--- a/arch/arm/include/asm/ioctls.h
+++ b/arch/arm/include/asm/ioctls.h
@@ -52,6 +52,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
@@ -81,6 +82,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h
index f784d11f40b5e..704135d28d1d3 100644
--- a/arch/arm/include/asm/termbits.h
+++ b/arch/arm/include/asm/termbits.h
@@ -177,6 +177,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index 143dafb3997ef..b7dd324b46a92 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -53,6 +53,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
@@ -82,6 +83,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/avr32/include/asm/termbits.h b/arch/avr32/include/asm/termbits.h
index db2daab31fdb5..366adc5ebb100 100644
--- a/arch/avr32/include/asm/termbits.h
+++ b/arch/avr32/include/asm/termbits.h
@@ -175,6 +175,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h
index bb49142dc6aba..c9129ed374430 100644
--- a/arch/cris/include/asm/ioctls.h
+++ b/arch/cris/include/asm/ioctls.h
@@ -54,6 +54,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@@ -85,6 +86,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/cris/include/asm/termbits.h b/arch/cris/include/asm/termbits.h
index 66e1a7492a0c7..1c43bc874ccf2 100644
--- a/arch/cris/include/asm/termbits.h
+++ b/arch/cris/include/asm/termbits.h
@@ -214,6 +214,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/asm/ioctls.h
index d0c30e31fbda0..a993e3759ccf2 100644
--- a/arch/frv/include/asm/ioctls.h
+++ b/arch/frv/include/asm/ioctls.h
@@ -53,6 +53,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@@ -79,6 +80,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/frv/include/asm/termbits.h b/arch/frv/include/asm/termbits.h
index 5568492b50860..7722e19cc349b 100644
--- a/arch/frv/include/asm/termbits.h
+++ b/arch/frv/include/asm/termbits.h
@@ -180,6 +180,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
diff --git a/arch/h8300/include/asm/ioctls.h b/arch/h8300/include/asm/ioctls.h
index 98a53d067269f..b6b249f9f308b 100644
--- a/arch/h8300/include/asm/ioctls.h
+++ b/arch/h8300/include/asm/ioctls.h
@@ -53,6 +53,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@@ -79,6 +80,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/h8300/include/asm/termbits.h b/arch/h8300/include/asm/termbits.h
index 31eca81db3f71..3287a6244d74c 100644
--- a/arch/h8300/include/asm/termbits.h
+++ b/arch/h8300/include/asm/termbits.h
@@ -179,6 +179,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/asm/ioctls.h
index f0ee86c0b5f77..b79c385114ef8 100644
--- a/arch/ia64/include/asm/ioctls.h
+++ b/arch/ia64/include/asm/ioctls.h
@@ -59,6 +59,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@@ -85,6 +86,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/ia64/include/asm/termbits.h b/arch/ia64/include/asm/termbits.h
index 9f162e0089ade..c009b94e58d91 100644
--- a/arch/ia64/include/asm/termbits.h
+++ b/arch/ia64/include/asm/termbits.h
@@ -187,6 +187,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
diff --git a/arch/m32r/include/asm/ioctls.h b/arch/m32r/include/asm/ioctls.h
index f4c13a52fe486..66288063a4c0e 100644
--- a/arch/m32r/include/asm/ioctls.h
+++ b/arch/m32r/include/asm/ioctls.h
@@ -53,6 +53,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
@@ -79,6 +80,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/m32r/include/asm/termbits.h b/arch/m32r/include/asm/termbits.h
index bc104008b55b5..957a3c688549f 100644
--- a/arch/m32r/include/asm/termbits.h
+++ b/arch/m32r/include/asm/termbits.h
@@ -179,6 +179,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
diff --git a/arch/m68k/include/asm/ioctls.h b/arch/m68k/include/asm/ioctls.h
index b8d2f4be7fd74..91a57d6654601 100644
--- a/arch/m68k/include/asm/ioctls.h
+++ b/arch/m68k/include/asm/ioctls.h
@@ -52,6 +52,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@@ -78,6 +79,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/m68k/include/asm/termbits.h b/arch/m68k/include/asm/termbits.h
index 8c14170996bb7..aea1e37b765a2 100644
--- a/arch/m68k/include/asm/termbits.h
+++ b/arch/m68k/include/asm/termbits.h
@@ -179,6 +179,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h
index 2fb9e1693bf7e..d87cb0465693a 100644
--- a/arch/mips/include/asm/ioctls.h
+++ b/arch/mips/include/asm/ioctls.h
@@ -41,7 +41,7 @@
#define TIOCPKT_START 0x08 /* start output */
#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */
#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */
-/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */
+#define TIOCPKT_IOCTL 0x40 /* state change of pty driver */
#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */
#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */
#define TIOCNOTTY 0x5471 /* void tty association */
@@ -83,6 +83,7 @@
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
diff --git a/arch/mips/include/asm/termbits.h b/arch/mips/include/asm/termbits.h
index c83c68444e866..76630b396fac3 100644
--- a/arch/mips/include/asm/termbits.h
+++ b/arch/mips/include/asm/termbits.h
@@ -203,6 +203,7 @@ struct ktermios {
#define PENDIN 0040000 /* Retype pending input (state). */
#define TOSTOP 0100000 /* Send SIGTTOU for background output. */
#define ITOSTOP TOSTOP
+#define EXTPROC 0200000 /* External processing on pty */
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h
index 638219a99b1e0..cb8cf19022347 100644
--- a/arch/mn10300/include/asm/ioctls.h
+++ b/arch/mn10300/include/asm/ioctls.h
@@ -54,6 +54,7 @@
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
* (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
@@ -80,6 +81,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/mn10300/include/asm/termbits.h b/arch/mn10300/include/asm/termbits.h
index eb2b0dc1f696f..130d42495972d 100644
--- a/arch/mn10300/include/asm/termbits.h
+++ b/arch/mn10300/include/asm/termbits.h
@@ -180,6 +180,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h
index 6cc497e525320..4e0614456bea4 100644
--- a/arch/parisc/include/asm/ioctls.h
+++ b/arch/parisc/include/asm/ioctls.h
@@ -52,6 +52,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@@ -82,6 +83,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/parisc/include/asm/termbits.h b/arch/parisc/include/asm/termbits.h
index d8bbc73b16b7f..d1ab92177a5c1 100644
--- a/arch/parisc/include/asm/termbits.h
+++ b/arch/parisc/include/asm/termbits.h
@@ -180,6 +180,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h
index 1842186d872c3..851920052e087 100644
--- a/arch/powerpc/include/asm/ioctls.h
+++ b/arch/powerpc/include/asm/ioctls.h
@@ -80,6 +80,7 @@
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
#define TIOCNOTTY 0x5422
@@ -93,6 +94,7 @@
#define TIOCSRS485 0x542f
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
diff --git a/arch/powerpc/include/asm/termbits.h b/arch/powerpc/include/asm/termbits.h
index 6698188ca550a..549d700e18f24 100644
--- a/arch/powerpc/include/asm/termbits.h
+++ b/arch/powerpc/include/asm/termbits.h
@@ -189,6 +189,7 @@ struct ktermios {
#define FLUSHO 0x00800000
#define PENDIN 0x20000000
#define IEXTEN 0x00000400
+#define EXTPROC 0x10000000
/* Values for the ACTION argument to `tcflow'. */
#define TCOOFF 0
diff --git a/arch/s390/include/asm/ioctls.h b/arch/s390/include/asm/ioctls.h
index 40e481b1b4613..2f3d8736361f0 100644
--- a/arch/s390/include/asm/ioctls.h
+++ b/arch/s390/include/asm/ioctls.h
@@ -60,6 +60,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
@@ -86,6 +87,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h
index c212c371a4a57..eb6c4c6879722 100644
--- a/arch/sh/include/asm/ioctls.h
+++ b/arch/sh/include/asm/ioctls.h
@@ -69,6 +69,7 @@
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
#define TIOCNOTTY _IO('T', 34) /* 0x5422 */
@@ -84,6 +85,7 @@
#define TCSETSF2 _IOW('T', 45, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h
index 1fe6855c5c189..53f4ee009bdda 100644
--- a/arch/sparc/include/asm/ioctls.h
+++ b/arch/sparc/include/asm/ioctls.h
@@ -80,6 +80,7 @@
/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */
#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */
+#define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */
/* Little f */
#define FIOCLEX _IO('f', 1)
@@ -132,5 +133,6 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#endif /* !(_ASM_SPARC_IOCTLS_H) */
diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h
index d72dfed1f9d7e..23b10ff08df2c 100644
--- a/arch/sparc/include/asm/termbits.h
+++ b/arch/sparc/include/asm/termbits.h
@@ -225,6 +225,7 @@ struct ktermios {
#define FLUSHO 0x00002000
#define PENDIN 0x00004000
#define IEXTEN 0x00008000
+#define EXTPROC 0x00010000
/* modem lines */
#define TIOCM_LE 0x001
diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h
index 0ffa942954b9b..ab1800012ed90 100644
--- a/arch/xtensa/include/asm/ioctls.h
+++ b/arch/xtensa/include/asm/ioctls.h
@@ -81,6 +81,7 @@
# define TIOCPKT_START 8
# define TIOCPKT_NOSTOP 16
# define TIOCPKT_DOSTOP 32
+# define TIOCPKT_IOCTL 64
#define TIOCNOTTY _IO('T', 34)
@@ -97,6 +98,7 @@
#define TCSETSF2 _IOW('T', 45, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG _IO('T', 83)
#define TIOCSERGWILD _IOR('T', 84, int)
diff --git a/arch/xtensa/include/asm/termbits.h b/arch/xtensa/include/asm/termbits.h
index 85aa6a3c0b6e6..0d6c8715b24f7 100644
--- a/arch/xtensa/include/asm/termbits.h
+++ b/arch/xtensa/include/asm/termbits.h
@@ -196,6 +196,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index bdae8327143c3..428f4fe0b5f74 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1102,6 +1102,11 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (I_IUCLC(tty) && L_IEXTEN(tty))
c = tolower(c);
+ if (L_EXTPROC(tty)) {
+ put_tty_queue(c, tty);
+ return;
+ }
+
if (tty->stopped && !tty->flow_stopped && I_IXON(tty) &&
I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) &&
c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) {
@@ -1409,7 +1414,8 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
n_tty_set_room(tty);
- if (!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) {
+ if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+ L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
@@ -1585,7 +1591,7 @@ static int n_tty_open(struct tty_struct *tty)
static inline int input_available_p(struct tty_struct *tty, int amt)
{
tty_flush_to_ldisc(tty);
- if (tty->icanon) {
+ if (tty->icanon && !L_EXTPROC(tty)) {
if (tty->canon_data)
return 1;
} else if (tty->read_cnt >= (amt ? amt : 1))
@@ -1632,6 +1638,11 @@ static int copy_from_read_buf(struct tty_struct *tty,
spin_lock_irqsave(&tty->read_lock, flags);
tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
tty->read_cnt -= n;
+ /* Turn single EOF into zero-length read */
+ if (L_EXTPROC(tty) && tty->icanon && n == 1) {
+ if (!tty->read_cnt && (*b)[n-1] == EOF_CHAR(tty))
+ n--;
+ }
spin_unlock_irqrestore(&tty->read_lock, flags);
*b += n;
*nr -= n;
@@ -1812,7 +1823,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
nr--;
}
- if (tty->icanon) {
+ if (tty->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
while (nr && tty->read_cnt) {
int eol;
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index d83a43130df43..b640ef29be1c8 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -171,6 +171,23 @@ static int pty_set_lock(struct tty_struct *tty, int __user *arg)
return 0;
}
+/* Send a signal to the slave */
+static int pty_signal(struct tty_struct *tty, int sig)
+{
+ unsigned long flags;
+ struct pid *pgrp;
+
+ if (tty->link) {
+ spin_lock_irqsave(&tty->link->ctrl_lock, flags);
+ pgrp = get_pid(tty->link->pgrp);
+ spin_unlock_irqrestore(&tty->link->ctrl_lock, flags);
+
+ kill_pgrp(pgrp, sig, 1);
+ put_pid(pgrp);
+ }
+ return 0;
+}
+
static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
@@ -321,6 +338,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
switch (cmd) {
case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
return pty_set_lock(tty, (int __user *) arg);
+ case TIOCSIG: /* Send signal to other side of pty */
+ return pty_signal(tty, (int) arg);
}
return -ENOIOCTLCMD;
}
@@ -476,6 +495,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
return pty_set_lock(tty, (int __user *)arg);
case TIOCGPTN: /* Get PT Number */
return put_user(tty->index, (unsigned int __user *)arg);
+ case TIOCSIG: /* Send signal to other side of pty */
+ return pty_signal(tty, (int) arg);
}
return -ENOIOCTLCMD;
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 6bd5f8866c74b..0c18899714593 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -517,19 +517,25 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
+ int extproc = (old_termios.c_lflag & EXTPROC) |
+ (tty->termios->c_lflag & EXTPROC);
int old_flow = ((old_termios.c_iflag & IXON) &&
(old_termios.c_cc[VSTOP] == '\023') &&
(old_termios.c_cc[VSTART] == '\021'));
int new_flow = (I_IXON(tty) &&
STOP_CHAR(tty) == '\023' &&
START_CHAR(tty) == '\021');
- if (old_flow != new_flow) {
+ if ((old_flow != new_flow) || extproc) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
- tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
- if (new_flow)
- tty->ctrl_status |= TIOCPKT_DOSTOP;
- else
- tty->ctrl_status |= TIOCPKT_NOSTOP;
+ if (old_flow != new_flow) {
+ tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
+ if (new_flow)
+ tty->ctrl_status |= TIOCPKT_DOSTOP;
+ else
+ tty->ctrl_status |= TIOCPKT_NOSTOP;
+ }
+ if (extproc)
+ tty->ctrl_status |= TIOCPKT_IOCTL;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
wake_up_interruptible(&tty->link->read_wait);
}
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 63ae85831464a..fa4bc48810fda 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -969,6 +969,7 @@ COMPATIBLE_IOCTL(TIOCGPGRP)
COMPATIBLE_IOCTL(TIOCGPTN)
COMPATIBLE_IOCTL(TIOCSPTLCK)
COMPATIBLE_IOCTL(TIOCSERGETLSR)
+COMPATIBLE_IOCTL(TIOCSIG)
#ifdef TCGETS2
COMPATIBLE_IOCTL(TCGETS2)
COMPATIBLE_IOCTL(TCSETS2)
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
index 1375fa1a7a4db..8554cb6a81b9b 100644
--- a/include/asm-generic/ioctls.h
+++ b/include/asm-generic/ioctls.h
@@ -69,6 +69,7 @@
#define TCSETX 0x5433
#define TCSETXF 0x5434
#define TCSETXW 0x5435
+#define TIOCSIG _IOW('T', 0x36, int) /* pty: generate signal */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
@@ -102,6 +103,7 @@
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
+#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
diff --git a/include/asm-generic/termbits.h b/include/asm-generic/termbits.h
index 1c9773d48cb02..232b4781aef31 100644
--- a/include/asm-generic/termbits.h
+++ b/include/asm-generic/termbits.h
@@ -178,6 +178,7 @@ struct ktermios {
#define FLUSHO 0010000
#define PENDIN 0040000
#define IEXTEN 0100000
+#define EXTPROC 0200000
/* tcflow() and TCXONC use these */
#define TCOOFF 0
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7802a243ee137..2df60e4ff40e0 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -179,6 +179,7 @@ struct tty_bufhead {
#define L_FLUSHO(tty) _L_FLAG((tty), FLUSHO)
#define L_PENDIN(tty) _L_FLAG((tty), PENDIN)
#define L_IEXTEN(tty) _L_FLAG((tty), IEXTEN)
+#define L_EXTPROC(tty) _L_FLAG((tty), EXTPROC)
struct device;
struct signal_struct;
--
GitLab
From 8fd4bd22350784d5b2fe9274f6790ba353976415 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed, 23 Jun 2010 12:56:12 -0700
Subject: [PATCH 652/863] vt/console: try harder to print output when panicing
Jesse's initial patch commit said:
"At panic time (i.e. when oops_in_progress is set) we should try a bit
harder to update the screen and make sure output gets to the VT, since
some drivers are capable of flipping back to it.
So make sure we try to unblank and update the display if called from a
panic context."
I've enhanced this to add a flag to the vc that console layer can set to
indicate they want this behaviour to occur. This also adds support to
fbcon for that flag and adds an fb flag for drivers to indicate they want
to use the support. It enables this for KMS drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: James Simmons <jsimmons@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/vt.c | 13 +++++++++----
drivers/gpu/drm/i915/intel_fb.c | 4 +---
drivers/gpu/drm/nouveau/nouveau_fbcon.c | 1 +
drivers/gpu/drm/radeon/radeon_fb.c | 2 +-
drivers/video/console/fbcon.c | 4 +++-
include/linux/console_struct.h | 1 +
include/linux/fb.h | 4 ++++
include/linux/vt_kern.h | 7 +++++++
8 files changed, 27 insertions(+), 9 deletions(-)
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 34bfb056d7a6c..82f64ac211911 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -705,7 +705,10 @@ void redraw_screen(struct vc_data *vc, int is_switch)
update_attr(vc);
clear_buffer_attributes(vc);
}
- if (update && vc->vc_mode != KD_GRAPHICS)
+
+ /* Forcibly update if we're panicing */
+ if ((update && vc->vc_mode != KD_GRAPHICS) ||
+ vt_force_oops_output(vc))
do_update_region(vc, vc->vc_origin, vc->vc_screenbuf_size / 2);
}
set_cursor(vc);
@@ -743,6 +746,7 @@ static void visual_init(struct vc_data *vc, int num, int init)
vc->vc_hi_font_mask = 0;
vc->vc_complement_mask = 0;
vc->vc_can_do_color = 0;
+ vc->vc_panic_force_write = false;
vc->vc_sw->con_init(vc, init);
if (!vc->vc_complement_mask)
vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800;
@@ -2506,7 +2510,7 @@ static void vt_console_print(struct console *co, const char *b, unsigned count)
goto quit;
}
- if (vc->vc_mode != KD_TEXT)
+ if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc))
goto quit;
/* undraw cursor first */
@@ -3784,7 +3788,8 @@ void do_unblank_screen(int leaving_gfx)
return;
}
vc = vc_cons[fg_console].d;
- if (vc->vc_mode != KD_TEXT)
+ /* Try to unblank in oops case too */
+ if (vc->vc_mode != KD_TEXT && !vt_force_oops_output(vc))
return; /* but leave console_blanked != 0 */
if (blankinterval) {
@@ -3793,7 +3798,7 @@ void do_unblank_screen(int leaving_gfx)
}
console_blanked = 0;
- if (vc->vc_sw->con_blank(vc, 0, leaving_gfx))
+ if (vc->vc_sw->con_blank(vc, 0, leaving_gfx) || vt_force_oops_output(vc))
/* Low-level driver cannot restore -> do it ourselves */
update_screen(vc);
if (console_blank_hook)
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 54acd8b534df4..a79525f434a8f 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -130,7 +130,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
strcpy(info->fix.id, "inteldrmfb");
- info->flags = FBINFO_DEFAULT;
+ info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &intelfb_ops;
/* setup aperture base/size for vesafb takeover */
@@ -148,8 +148,6 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset;
info->fix.smem_len = size;
- info->flags = FBINFO_DEFAULT;
-
info->screen_base = ioremap_wc(dev->agp->base + obj_priv->gtt_offset,
size);
if (!info->screen_base) {
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 2fb2444d23221..099f637264aa7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -250,6 +250,7 @@ nouveau_fbcon_create(struct nouveau_fbdev *nfbdev,
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT |
FBINFO_HWACCEL_IMAGEBLIT;
+ info->flags |= FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &nouveau_fbcon_ops;
info->fix.smem_start = dev->mode_config.fb_base + nvbo->bo.offset -
dev_priv->vm_vram_base;
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index dc1634bb0c11e..dbf86962bdd16 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -224,7 +224,7 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
- info->flags = FBINFO_DEFAULT;
+ info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &radeonfb_ops;
tmp = radeon_bo_gpu_offset(rbo) - rdev->mc.vram_start;
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 3b3f5749af925..26bf7cbfecc27 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -283,7 +283,8 @@ static inline int fbcon_is_inactive(struct vc_data *vc, struct fb_info *info)
struct fbcon_ops *ops = info->fbcon_par;
return (info->state != FBINFO_STATE_RUNNING ||
- vc->vc_mode != KD_TEXT || ops->graphics);
+ vc->vc_mode != KD_TEXT || ops->graphics) &&
+ !vt_force_oops_output(vc);
}
static inline int get_color(struct vc_data *vc, struct fb_info *info,
@@ -1073,6 +1074,7 @@ static void fbcon_init(struct vc_data *vc, int init)
if (p->userfont)
charcnt = FNTCHARCNT(p->fontdata);
+ vc->vc_panic_force_write = !!(info->flags & FBINFO_CAN_FORCE_OUTPUT);
vc->vc_can_do_color = (fb_get_color_depth(&info->var, &info->fix)!=1);
vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800;
if (charcnt == 256) {
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index 38fe59dc89aef..d7d9acdccffb2 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -105,6 +105,7 @@ struct vc_data {
struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */
unsigned long vc_uni_pagedir;
unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
+ bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */
/* additional information is in vt_kern.h */
};
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 0c5659c41b01c..f0268deca658b 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -825,6 +825,10 @@ struct fb_tile_ops {
*/
#define FBINFO_BE_MATH 0x100000
+/* report to the VT layer that this fb driver can accept forced console
+ output like oopses */
+#define FBINFO_CAN_FORCE_OUTPUT 0x200000
+
struct fb_info {
int node;
int flags;
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 7f56db4a79f02..56cce345aa8d6 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -100,6 +100,13 @@ extern int unbind_con_driver(const struct consw *csw, int first, int last,
int deflt);
int vty_init(const struct file_operations *console_fops);
+static inline bool vt_force_oops_output(struct vc_data *vc)
+{
+ if (oops_in_progress && vc->vc_panic_force_write)
+ return true;
+ return false;
+}
+
/*
* vc_screen.c shares this temporary buffer with the console write code so that
* we can easily avoid touching user space while holding the console spinlock.
--
GitLab
From b4eda9cb48eac1b7369ad33e5d015c33b4376431 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:41 +0200
Subject: [PATCH 653/863] stallion: prune lock_kernel calls
Remove unneeded tty layer lock kernel bits. Relock the needed bits using the
port mutex. The istallion still has brd state races but those are not new
or introduced by the removal of the lock_kernel logic.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/istallion.c | 22 +++++++++++++---------
drivers/char/stallion.c | 20 ++++++++++++--------
2 files changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 4e395c956a09f..750650cbac111 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -14,6 +14,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
+ * FIXME: brdp->state needs proper locking.
*/
/*****************************************************************************/
@@ -4011,6 +4012,7 @@ static int stli_getbrdstats(combrd_t __user *bp)
return -ENODEV;
memset(&stli_brdstats, 0, sizeof(combrd_t));
+
stli_brdstats.brd = brdp->brdnr;
stli_brdstats.type = brdp->brdtype;
stli_brdstats.hwid = 0;
@@ -4076,10 +4078,13 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
if (brdp == NULL)
return -ENODEV;
+ mutex_lock(&portp->port.mutex);
if (brdp->state & BST_STARTED) {
if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
- &stli_cdkstats, sizeof(asystats_t), 1)) < 0)
+ &stli_cdkstats, sizeof(asystats_t), 1)) < 0) {
+ mutex_unlock(&portp->port.mutex);
return rc;
+ }
} else {
memset(&stli_cdkstats, 0, sizeof(asystats_t));
}
@@ -4124,6 +4129,7 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
stli_comstats.modem = stli_cdkstats.dcdcnt;
stli_comstats.hwid = stli_cdkstats.hwid;
stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals);
+ mutex_unlock(&portp->port.mutex);
return 0;
}
@@ -4186,15 +4192,20 @@ static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
if (!brdp)
return -ENODEV;
+ mutex_lock(&portp->port.mutex);
+
if (brdp->state & BST_STARTED) {
- if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0)
+ if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) {
+ mutex_unlock(&portp->port.mutex);
return rc;
+ }
}
memset(&stli_comstats, 0, sizeof(comstats_t));
stli_comstats.brd = portp->brdnr;
stli_comstats.panel = portp->panelnr;
stli_comstats.port = portp->portnr;
+ mutex_unlock(&portp->port.mutex);
if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t)))
return -EFAULT;
@@ -4266,8 +4277,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
done = 0;
rc = 0;
- lock_kernel();
-
switch (cmd) {
case COM_GETPORTSTATS:
rc = stli_getportstats(NULL, NULL, argp);
@@ -4290,8 +4299,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
done++;
break;
}
- unlock_kernel();
-
if (done)
return rc;
@@ -4308,8 +4315,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
if (brdp->state == 0)
return -ENODEV;
- lock_kernel();
-
switch (cmd) {
case STL_BINTR:
EBRDINTR(brdp);
@@ -4332,7 +4337,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 6049fd7319240..f2167f8e5aab6 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -807,7 +807,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
timeout = HZ;
tend = jiffies + timeout;
- lock_kernel();
while (stl_datastate(portp)) {
if (signal_pending(current))
break;
@@ -815,7 +814,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
if (time_after_eq(jiffies, tend))
break;
}
- unlock_kernel();
}
/*****************************************************************************/
@@ -1029,6 +1027,8 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp);
memset(&sio, 0, sizeof(struct serial_struct));
+
+ mutex_lock(&portp->port.mutex);
sio.line = portp->portnr;
sio.port = portp->ioaddr;
sio.flags = portp->port.flags;
@@ -1048,6 +1048,7 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
brdp = stl_brds[portp->brdnr];
if (brdp != NULL)
sio.irq = brdp->irq;
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
}
@@ -1069,12 +1070,15 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp
if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
return -EFAULT;
+ mutex_lock(&portp->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
if ((sio.baud_base != portp->baud_base) ||
(sio.close_delay != portp->close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
- (portp->port.flags & ~ASYNC_USR_MASK)))
+ (portp->port.flags & ~ASYNC_USR_MASK))) {
+ mutex_unlock(&portp->port.mutex);
return -EPERM;
+ }
}
portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
@@ -1083,6 +1087,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp
portp->close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
+ mutex_unlock(&portp->port.mutex);
stl_setport(portp, tty->termios);
return 0;
}
@@ -1147,8 +1152,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
rc = 0;
- lock_kernel();
-
switch (cmd) {
case TIOCGSERIAL:
rc = stl_getserial(portp, argp);
@@ -1173,7 +1176,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
@@ -2327,6 +2329,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst
return -ENODEV;
}
+ mutex_lock(&portp->port.mutex);
portp->stats.state = portp->istate;
portp->stats.flags = portp->port.flags;
portp->stats.hwid = portp->hwid;
@@ -2358,6 +2361,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst
(STL_TXBUFSIZE - (tail - head));
portp->stats.signals = (unsigned long) stl_getsignals(portp);
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(cp, &portp->stats,
sizeof(comstats_t)) ? -EFAULT : 0;
@@ -2382,10 +2386,12 @@ static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp)
return -ENODEV;
}
+ mutex_lock(&portp->port.mutex);
memset(&portp->stats, 0, sizeof(comstats_t));
portp->stats.brd = portp->brdnr;
portp->stats.panel = portp->panelnr;
portp->stats.port = portp->portnr;
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(cp, &portp->stats,
sizeof(comstats_t)) ? -EFAULT : 0;
}
@@ -2451,7 +2457,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
return -ENODEV;
rc = 0;
- lock_kernel();
switch (cmd) {
case COM_GETPORTSTATS:
rc = stl_getportstats(NULL, NULL, argp);
@@ -2472,7 +2477,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
--
GitLab
From 8a1e803d0148e320b9200a442dfb88f8cbde88e7 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:42 +0200
Subject: [PATCH 654/863] istallion: use bit ops for the board flags
This lets us avoid problems with races on the flag changes
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/istallion.c | 36 ++++++++++++++++++------------------
include/linux/istallion.h | 2 +-
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 750650cbac111..5e9a81d8ebcfc 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -14,7 +14,6 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * FIXME: brdp->state needs proper locking.
*/
/*****************************************************************************/
@@ -204,9 +203,9 @@ static int stli_shared;
* the board has been detected, and whether it is actually running a slave
* or not.
*/
-#define BST_FOUND 0x1
-#define BST_STARTED 0x2
-#define BST_PROBED 0x4
+#define BST_FOUND 0
+#define BST_STARTED 1
+#define BST_PROBED 2
/*
* Define the set of port state flags. These are marked for internal
@@ -817,7 +816,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
brdp = stli_brds[brdnr];
if (brdp == NULL)
return -ENODEV;
- if ((brdp->state & BST_STARTED) == 0)
+ if (!test_bit(BST_STARTED, &brdp->state))
return -ENODEV;
portnr = MINOR2PORT(minordev);
if (portnr > brdp->nrports)
@@ -1847,7 +1846,7 @@ static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stlip
rc = stli_portcmdstats(NULL, portp);
uart = "UNKNOWN";
- if (brdp->state & BST_STARTED) {
+ if (test_bit(BST_STARTED, &brdp->state)) {
switch (stli_comstats.hwid) {
case 0: uart = "2681"; break;
case 1: uart = "SC26198"; break;
@@ -1856,7 +1855,7 @@ static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stlip
}
seq_printf(m, "%d: uart:%s ", portnr, uart);
- if ((brdp->state & BST_STARTED) && (rc >= 0)) {
+ if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) {
char sep;
seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal,
@@ -2356,7 +2355,7 @@ static void stli_poll(unsigned long arg)
brdp = stli_brds[brdnr];
if (brdp == NULL)
continue;
- if ((brdp->state & BST_STARTED) == 0)
+ if (!test_bit(BST_STARTED, &brdp->state))
continue;
spin_lock(&brd_lock);
@@ -3141,7 +3140,7 @@ static int stli_initecp(struct stlibrd *brdp)
}
- brdp->state |= BST_FOUND;
+ set_bit(BST_FOUND, &brdp->state);
return 0;
err_unmap:
iounmap(brdp->membase);
@@ -3298,7 +3297,7 @@ static int stli_initonb(struct stlibrd *brdp)
brdp->panels[0] = brdp->nrports;
- brdp->state |= BST_FOUND;
+ set_bit(BST_FOUND, &brdp->state);
return 0;
err_unmap:
iounmap(brdp->membase);
@@ -3408,7 +3407,7 @@ static int stli_startbrd(struct stlibrd *brdp)
spin_unlock_irqrestore(&brd_lock, flags);
if (rc == 0)
- brdp->state |= BST_STARTED;
+ set_bit(BST_STARTED, &brdp->state);
if (! stli_timeron) {
stli_timeron++;
@@ -3711,7 +3710,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev,
if (retval)
goto err_null;
- brdp->state |= BST_PROBED;
+ set_bit(BST_PROBED, &brdp->state);
pci_set_drvdata(pdev, brdp);
EBRDENABLE(brdp);
@@ -3842,7 +3841,7 @@ static int __init stli_initbrds(void)
brdp = stli_brds[i];
if (brdp == NULL)
continue;
- if (brdp->state & BST_FOUND) {
+ if (test_bit(BST_FOUND, &brdp->state)) {
EBRDENABLE(brdp);
brdp->enable = NULL;
brdp->disable = NULL;
@@ -4079,7 +4078,7 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
return -ENODEV;
mutex_lock(&portp->port.mutex);
- if (brdp->state & BST_STARTED) {
+ if (test_bit(BST_STARTED, &brdp->state)) {
if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
&stli_cdkstats, sizeof(asystats_t), 1)) < 0) {
mutex_unlock(&portp->port.mutex);
@@ -4194,7 +4193,7 @@ static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
mutex_lock(&portp->port.mutex);
- if (brdp->state & BST_STARTED) {
+ if (test_bit(BST_STARTED, &brdp->state)) {
if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) {
mutex_unlock(&portp->port.mutex);
return rc;
@@ -4323,10 +4322,10 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
rc = stli_startbrd(brdp);
break;
case STL_BSTOP:
- brdp->state &= ~BST_STARTED;
+ clear_bit(BST_STARTED, &brdp->state);
break;
case STL_BRESET:
- brdp->state &= ~BST_STARTED;
+ clear_bit(BST_STARTED, &brdp->state);
EBRDRESET(brdp);
if (stli_shared == 0) {
if (brdp->reenable != NULL)
@@ -4382,7 +4381,8 @@ static void istallion_cleanup_isa(void)
unsigned int j;
for (j = 0; (j < stli_nrbrds); j++) {
- if ((brdp = stli_brds[j]) == NULL || (brdp->state & BST_PROBED))
+ if ((brdp = stli_brds[j]) == NULL ||
+ test_bit(BST_PROBED, &brdp->state))
continue;
stli_cleanup_ports(brdp);
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
index 7faca98c7d144..ad700a60c1587 100644
--- a/include/linux/istallion.h
+++ b/include/linux/istallion.h
@@ -86,7 +86,7 @@ struct stlibrd {
unsigned long magic;
unsigned int brdnr;
unsigned int brdtype;
- unsigned int state;
+ unsigned long state;
unsigned int nrpanels;
unsigned int nrports;
unsigned int nrdevs;
--
GitLab
From bf936f92a7a564a2cdb44bbe3bc797cd811bf625 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:43 +0200
Subject: [PATCH 655/863] riscom8: kill use of lock_kernel
The riscom8 board uses lock_kernel to protect bits of the port setting
ioctl logic. We can use the port mutex for this as the logic is internal
and will also lock set versus open (a locking property that has been lost
somewhere along the way)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/riscom8.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index b02332a5412f7..af4de1fe84454 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -47,7 +47,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/tty_flip.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/device.h>
@@ -1184,6 +1183,7 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
return -EFAULT;
+ mutex_lock(&port->port.mutex);
change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
@@ -1191,8 +1191,10 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
if ((tmp.close_delay != port->port.close_delay) ||
(tmp.closing_wait != port->port.closing_wait) ||
((tmp.flags & ~ASYNC_USR_MASK) !=
- (port->port.flags & ~ASYNC_USR_MASK)))
+ (port->port.flags & ~ASYNC_USR_MASK))) {
+ mutex_unlock(&port->port.mutex);
return -EPERM;
+ }
port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
(tmp.flags & ASYNC_USR_MASK));
} else {
@@ -1208,6 +1210,7 @@ static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
rc_change_speed(tty, bp, port);
spin_unlock_irqrestore(&riscom_lock, flags);
}
+ mutex_unlock(&port->port.mutex);
return 0;
}
@@ -1220,12 +1223,15 @@ static int rc_get_serial_info(struct riscom_port *port,
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_CIRRUS;
tmp.line = port - rc_port;
+
+ mutex_lock(&port->port.mutex);
tmp.port = bp->base;
tmp.irq = bp->irq;
tmp.flags = port->port.flags;
tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
tmp.close_delay = port->port.close_delay * HZ/100;
tmp.closing_wait = port->port.closing_wait * HZ/100;
+ mutex_unlock(&port->port.mutex);
tmp.xmit_fifo_size = CD180_NFIFO;
return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -1242,14 +1248,10 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp,
switch (cmd) {
case TIOCGSERIAL:
- lock_kernel();
retval = rc_get_serial_info(port, argp);
- unlock_kernel();
break;
case TIOCSSERIAL:
- lock_kernel();
retval = rc_set_serial_info(tty, port, argp);
- unlock_kernel();
break;
default:
retval = -ENOIOCTLCMD;
--
GitLab
From ec82db129e94c7896e732d21f2bb9ab8e7312fe0 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:44 +0200
Subject: [PATCH 656/863] isicom: kill off the BKL
As with the others we can use the port mutex to get the needed locking
properties and fix the race with open.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/isicom.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 98310e1aae306..c27e9d21fea9f 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -124,7 +124,6 @@
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/serial.h>
-#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
@@ -872,7 +871,6 @@ static struct tty_port *isicom_find_port(struct tty_struct *tty)
static int isicom_open(struct tty_struct *tty, struct file *filp)
{
struct isi_port *port;
- struct isi_board *card;
struct tty_port *tport;
tport = isicom_find_port(tty);
@@ -1118,8 +1116,7 @@ static int isicom_set_serial_info(struct tty_struct *tty,
if (copy_from_user(&newinfo, info, sizeof(newinfo)))
return -EFAULT;
- lock_kernel();
-
+ mutex_lock(&port->port.mutex);
reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
(newinfo.flags & ASYNC_SPD_MASK));
@@ -1128,7 +1125,7 @@ static int isicom_set_serial_info(struct tty_struct *tty,
(newinfo.closing_wait != port->port.closing_wait) ||
((newinfo.flags & ~ASYNC_USR_MASK) !=
(port->port.flags & ~ASYNC_USR_MASK))) {
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
return -EPERM;
}
port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
@@ -1145,7 +1142,7 @@ static int isicom_set_serial_info(struct tty_struct *tty,
isicom_config_port(tty);
spin_unlock_irqrestore(&port->card->card_lock, flags);
}
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
return 0;
}
@@ -1154,7 +1151,7 @@ static int isicom_get_serial_info(struct isi_port *port,
{
struct serial_struct out_info;
- lock_kernel();
+ mutex_lock(&port->port.mutex);
memset(&out_info, 0, sizeof(out_info));
/* out_info.type = ? */
out_info.line = port - isi_ports;
@@ -1164,7 +1161,7 @@ static int isicom_get_serial_info(struct isi_port *port,
/* out_info.baud_base = ? */
out_info.close_delay = port->port.close_delay;
out_info.closing_wait = port->port.closing_wait;
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
if (copy_to_user(info, &out_info, sizeof(out_info)))
return -EFAULT;
return 0;
--
GitLab
From 417b6e0e146ba38eec5d79777433e38c73d4feb1 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:45 +0200
Subject: [PATCH 657/863] rocket: kill BKL
We can use the port mutex for this and also for the hangup path so removing
the problematic use of the hangup mutex in this driver. Fix up the locking
on the various port flags while we are at it.
Ultimately this driver needs to be using tty_port_ helpers which would sort
this out far better.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/rocket.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 0e29a23ec4c50..79c3bc69165af 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -73,7 +73,6 @@
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
@@ -1017,6 +1016,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(port, tty, filp) == 0)
return;
+ mutex_lock(&port->mutex);
cp = &info->channel;
/*
* Before we drop DTR, make sure the UART transmitter
@@ -1060,9 +1060,13 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
info->xmit_buf = NULL;
}
}
+ spin_lock_irq(&port->lock);
info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
tty->closing = 0;
+ spin_unlock_irq(&port->lock);
+ mutex_unlock(&port->mutex);
tty_port_tty_set(port, NULL);
+
wake_up_interruptible(&port->close_wait);
complete_all(&info->close_wait);
atomic_dec(&rp_num_ports_open);
@@ -1210,11 +1214,13 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof (tmp));
+ mutex_lock(&info->port.mutex);
tmp.line = info->line;
tmp.flags = info->flags;
tmp.close_delay = info->port.close_delay;
tmp.closing_wait = info->port.closing_wait;
tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
+ mutex_unlock(&info->port.mutex);
if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
return -EFAULT;
@@ -1229,10 +1235,13 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
return -EFAULT;
+ mutex_lock(&info->port.mutex);
if (!capable(CAP_SYS_ADMIN))
{
- if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
+ if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) {
+ mutex_unlock(&info->port.mutex);
return -EPERM;
+ }
info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
configure_r_port(tty, info, NULL);
return 0;
@@ -1250,6 +1259,7 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
tty->alt_speed = 230400;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
tty->alt_speed = 460800;
+ mutex_unlock(&info->port.mutex);
configure_r_port(tty, info, NULL);
return 0;
@@ -1325,8 +1335,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
return -ENXIO;
- lock_kernel();
-
switch (cmd) {
case RCKP_GET_STRUCT:
if (copy_to_user(argp, info, sizeof (struct r_port)))
@@ -1350,7 +1358,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
default:
ret = -ENOIOCTLCMD;
}
- unlock_kernel();
return ret;
}
@@ -1471,7 +1478,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
jiffies);
printk(KERN_INFO "cps=%d...\n", info->cps);
#endif
- lock_kernel();
while (1) {
txcnt = sGetTxCnt(cp);
if (!txcnt) {
@@ -1499,7 +1505,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
__set_current_state(TASK_RUNNING);
- unlock_kernel();
#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
#endif
@@ -1512,6 +1517,7 @@ static void rp_hangup(struct tty_struct *tty)
{
CHANNEL_t *cp;
struct r_port *info = tty->driver_data;
+ unsigned long flags;
if (rocket_paranoia_check(info, "rp_hangup"))
return;
@@ -1520,11 +1526,15 @@ static void rp_hangup(struct tty_struct *tty)
printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
#endif
rp_flush_buffer(tty);
- if (info->port.flags & ASYNC_CLOSING)
+ spin_lock_irqsave(&info->port.lock, flags);
+ if (info->port.flags & ASYNC_CLOSING) {
+ spin_unlock_irqrestore(&info->port.lock, flags);
return;
+ }
if (info->port.count)
atomic_dec(&rp_num_ports_open);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+ spin_unlock_irqrestore(&info->port.lock, flags);
tty_port_hangup(&info->port);
@@ -1535,7 +1545,7 @@ static void rp_hangup(struct tty_struct *tty)
sDisCTSFlowCtl(cp);
sDisTxSoftFlowCtl(cp);
sClrTxXOFF(cp);
- info->port.flags &= ~ASYNC_INITIALIZED;
+ clear_bit(ASYNCB_INITIALIZED, &info->port.flags);
wake_up_interruptible(&info->port.open_wait);
}
--
GitLab
From f602501d90e0da28c8e6f5e4569b8bf5d40a9d9c Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:46 +0200
Subject: [PATCH 658/863] synclink: kill the big kernel lock
We don't need it while waiting and we can lock the ioctls using the port
mutex. While at it eliminate use of the hangup mutex and switch to the port
mutex.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/synclink.c | 19 +++++-----
drivers/char/synclink_gt.c | 78 +++++++++++++++++---------------------
drivers/char/synclinkmp.c | 32 ++++++----------
3 files changed, 56 insertions(+), 73 deletions(-)
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 0658fc5482225..2b03d4d473505 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -81,7 +81,6 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
@@ -2436,7 +2435,9 @@ static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *
if (!user_icount) {
memset(&info->icount, 0, sizeof(info->icount));
} else {
+ mutex_lock(&info->port.mutex);
COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+ mutex_unlock(&info->port.mutex);
if (err)
return -EFAULT;
}
@@ -2461,7 +2462,9 @@ static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_p
printk("%s(%d):mgsl_get_params(%s)\n",
__FILE__,__LINE__, info->device_name);
+ mutex_lock(&info->port.mutex);
COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+ mutex_unlock(&info->port.mutex);
if (err) {
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
@@ -2501,11 +2504,13 @@ static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_pa
return -EFAULT;
}
+ mutex_lock(&info->port.mutex);
spin_lock_irqsave(&info->irq_spinlock,flags);
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->irq_spinlock,flags);
mgsl_change_params(info);
+ mutex_unlock(&info->port.mutex);
return 0;
@@ -2935,7 +2940,6 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
struct mgsl_struct * info = tty->driver_data;
- int ret;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
@@ -2950,10 +2954,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
return -EIO;
}
- lock_kernel();
- ret = mgsl_ioctl_common(info, cmd, arg);
- unlock_kernel();
- return ret;
+ return mgsl_ioctl_common(info, cmd, arg);
}
static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
@@ -3109,12 +3110,14 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
-
+
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
mgsl_wait_until_sent(tty, info->timeout);
mgsl_flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
@@ -3162,7 +3165,6 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
* Note: use tight timings here to satisfy the NIST-PCTS.
*/
- lock_kernel();
if ( info->params.data_rate ) {
char_time = info->timeout/(32 * 5);
if (!char_time)
@@ -3192,7 +3194,6 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
}
- unlock_kernel();
exit:
if (debug_level >= DEBUG_LEVEL_INFO)
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 334cf5c8c8b6e..3c7ac6a3ff809 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -40,8 +40,8 @@
#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
-//#define DBGTBUF(info) dump_tbufs(info)
-//#define DBGRBUF(info) dump_rbufs(info)
+/*#define DBGTBUF(info) dump_tbufs(info)*/
+/*#define DBGRBUF(info) dump_rbufs(info)*/
#include <linux/module.h>
@@ -62,7 +62,6 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
@@ -901,8 +900,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
* Note: use tight timings here to satisfy the NIST-PCTS.
*/
- lock_kernel();
-
if (info->params.data_rate) {
char_time = info->timeout/(32 * 5);
if (!char_time)
@@ -920,8 +917,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
- unlock_kernel();
-
exit:
DBGINFO(("%s wait_until_sent exit\n", info->device_name));
}
@@ -1041,8 +1036,37 @@ static int ioctl(struct tty_struct *tty, struct file *file,
return -EIO;
}
- lock_kernel();
-
+ switch (cmd) {
+ case MGSL_IOCWAITEVENT:
+ return wait_mgsl_event(info, argp);
+ case TIOCMIWAIT:
+ return modem_input_wait(info,(int)arg);
+ case TIOCGICOUNT:
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+ p_cuser = argp;
+ if (put_user(cnow.cts, &p_cuser->cts) ||
+ put_user(cnow.dsr, &p_cuser->dsr) ||
+ put_user(cnow.rng, &p_cuser->rng) ||
+ put_user(cnow.dcd, &p_cuser->dcd) ||
+ put_user(cnow.rx, &p_cuser->rx) ||
+ put_user(cnow.tx, &p_cuser->tx) ||
+ put_user(cnow.frame, &p_cuser->frame) ||
+ put_user(cnow.overrun, &p_cuser->overrun) ||
+ put_user(cnow.parity, &p_cuser->parity) ||
+ put_user(cnow.brk, &p_cuser->brk) ||
+ put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
+ return -EFAULT;
+ return 0;
+ case MGSL_IOCSGPIO:
+ return set_gpio(info, argp);
+ case MGSL_IOCGGPIO:
+ return get_gpio(info, argp);
+ case MGSL_IOCWAITGPIO:
+ return wait_gpio(info, argp);
+ }
+ mutex_lock(&info->port.mutex);
switch (cmd) {
case MGSL_IOCGPARAMS:
ret = get_params(info, argp);
@@ -1068,50 +1092,16 @@ static int ioctl(struct tty_struct *tty, struct file *file,
case MGSL_IOCGSTATS:
ret = get_stats(info, argp);
break;
- case MGSL_IOCWAITEVENT:
- ret = wait_mgsl_event(info, argp);
- break;
- case TIOCMIWAIT:
- ret = modem_input_wait(info,(int)arg);
- break;
case MGSL_IOCGIF:
ret = get_interface(info, argp);
break;
case MGSL_IOCSIF:
ret = set_interface(info,(int)arg);
break;
- case MGSL_IOCSGPIO:
- ret = set_gpio(info, argp);
- break;
- case MGSL_IOCGGPIO:
- ret = get_gpio(info, argp);
- break;
- case MGSL_IOCWAITGPIO:
- ret = wait_gpio(info, argp);
- break;
- case TIOCGICOUNT:
- spin_lock_irqsave(&info->lock,flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock,flags);
- p_cuser = argp;
- if (put_user(cnow.cts, &p_cuser->cts) ||
- put_user(cnow.dsr, &p_cuser->dsr) ||
- put_user(cnow.rng, &p_cuser->rng) ||
- put_user(cnow.dcd, &p_cuser->dcd) ||
- put_user(cnow.rx, &p_cuser->rx) ||
- put_user(cnow.tx, &p_cuser->tx) ||
- put_user(cnow.frame, &p_cuser->frame) ||
- put_user(cnow.overrun, &p_cuser->overrun) ||
- put_user(cnow.parity, &p_cuser->parity) ||
- put_user(cnow.brk, &p_cuser->brk) ||
- put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- ret = -EFAULT;
- ret = 0;
- break;
default:
ret = -ENOIOCTLCMD;
}
- unlock_kernel();
+ mutex_unlock(&info->port.mutex);
return ret;
}
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 2b18adc4ee193..8da976bd7314d 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -52,7 +52,6 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
@@ -1062,9 +1061,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
if (sanity_check(info, tty->name, "wait_until_sent"))
return;
- lock_kernel();
-
- if (!(info->port.flags & ASYNC_INITIALIZED))
+ if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
goto exit;
orig_jiffies = jiffies;
@@ -1094,8 +1091,10 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
} else {
- //TODO: determine if there is something similar to USC16C32
- // TXSTATUS_ALL_SENT status
+ /*
+ * TODO: determine if there is something similar to USC16C32
+ * TXSTATUS_ALL_SENT status
+ */
while ( info->tx_active && info->tx_enabled) {
msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
@@ -1106,7 +1105,6 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
}
exit:
- unlock_kernel();
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s wait_until_sent() exit\n",
__FILE__,__LINE__, info->device_name );
@@ -1122,7 +1120,6 @@ static int write_room(struct tty_struct *tty)
if (sanity_check(info, tty->name, "write_room"))
return 0;
- lock_kernel();
if (info->params.mode == MGSL_MODE_HDLC) {
ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
} else {
@@ -1130,7 +1127,6 @@ static int write_room(struct tty_struct *tty)
if (ret < 0)
ret = 0;
}
- unlock_kernel();
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s write_room()=%d\n",
@@ -1251,7 +1247,7 @@ static void tx_release(struct tty_struct *tty)
*
* Return Value: 0 if success, otherwise error code
*/
-static int do_ioctl(struct tty_struct *tty, struct file *file,
+static int ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
SLMP_INFO *info = tty->driver_data;
@@ -1341,16 +1337,6 @@ static int do_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
-static int ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int ret;
- lock_kernel();
- ret = do_ioctl(tty, file, cmd, arg);
- unlock_kernel();
- return ret;
-}
-
/*
* /proc fs routines....
*/
@@ -2883,7 +2869,9 @@ static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
if (!user_icount) {
memset(&info->icount, 0, sizeof(info->icount));
} else {
+ mutex_lock(&info->port.mutex);
COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+ mutex_unlock(&info->port.mutex);
if (err)
return -EFAULT;
}
@@ -2898,7 +2886,9 @@ static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
printk("%s(%d):%s get_params()\n",
__FILE__,__LINE__, info->device_name);
+ mutex_lock(&info->port.mutex);
COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+ mutex_unlock(&info->port.mutex);
if (err) {
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):%s get_params() user buffer copy failed\n",
@@ -2926,11 +2916,13 @@ static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
return -EFAULT;
}
+ mutex_lock(&info->port.mutex);
spin_lock_irqsave(&info->lock,flags);
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->lock,flags);
change_params(info);
+ mutex_unlock(&info->port.mutex);
return 0;
}
--
GitLab
From 25c3cdf80c73156e910a322aba468ddaca0b91ae Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:47 +0200
Subject: [PATCH 659/863] cyclades: Kill off BKL usage
Use the port mutext for config setting, the rest is locked sufficiently
anyway that the BKL makes no odds.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/cyclades.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 9824b41629041..51acfe39a438f 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -65,7 +65,6 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
-#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
@@ -1655,7 +1654,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
return; /* Just in case.... */
orig_jiffies = jiffies;
- lock_kernel();
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -1702,7 +1700,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
}
/* Run one more char cycle */
msleep_interruptible(jiffies_to_msecs(char_time * 5));
- unlock_kernel();
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
#endif
@@ -1959,7 +1956,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
int char_count;
__u32 tx_put, tx_get, tx_bufsize;
- lock_kernel();
tx_get = readl(&buf_ctrl->tx_get);
tx_put = readl(&buf_ctrl->tx_put);
tx_bufsize = readl(&buf_ctrl->tx_bufsize);
@@ -1971,7 +1967,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
info->line, info->xmit_cnt + char_count);
#endif
- unlock_kernel();
return info->xmit_cnt + char_count;
}
#endif /* Z_EXT_CHARS_IN_BUFFER */
@@ -2359,17 +2354,22 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
+ int ret;
if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
+ mutex_lock(&info->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
if (new_serial.close_delay != info->port.close_delay ||
new_serial.baud_base != info->baud ||
(new_serial.flags & ASYNC_FLAGS &
~ASYNC_USR_MASK) !=
(info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
+ {
+ mutex_unlock(&info->port.mutex);
return -EPERM;
+ }
info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK);
info->baud = new_serial.baud_base;
@@ -2392,10 +2392,12 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
check_and_exit:
if (info->port.flags & ASYNC_INITIALIZED) {
cy_set_line_char(info, tty);
- return 0;
+ ret = 0;
} else {
- return cy_startup(info, tty);
+ ret = cy_startup(info, tty);
}
+ mutex_unlock(&info->port.mutex);
+ return ret;
} /* set_serial_info */
/*
@@ -2438,7 +2440,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
card = info->card;
- lock_kernel();
if (!cy_is_Z(card)) {
unsigned long flags;
int channel = info->line - card->first_line;
@@ -2478,7 +2479,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
}
end:
- unlock_kernel();
return result;
} /* cy_tiomget */
@@ -2696,7 +2696,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
info->line, cmd, arg);
#endif
- lock_kernel();
switch (cmd) {
case CYGETMON:
@@ -2817,7 +2816,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
default:
ret_val = -ENOIOCTLCMD;
}
- unlock_kernel();
#ifdef CY_DEBUG_OTHER
printk(KERN_DEBUG "cyc:cy_ioctl done\n");
--
GitLab
From 7cc34fd028ef35b12fec0fa9268c37c099d33bd2 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:48 +0200
Subject: [PATCH 660/863] epca: Kill the big kernel lock
The lock is no longer needed for wait until sent paths so this can go
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/epca.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 6f5ffe1320f70..d9df46aa0fbaf 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -36,7 +36,7 @@
#include <linux/ctype.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
@@ -2105,7 +2105,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
break;
case DIGI_SETAW:
case DIGI_SETAF:
- lock_kernel();
if (cmd == DIGI_SETAW) {
/* Setup an event to indicate when the transmit
buffer empties */
@@ -2118,7 +2117,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
if (tty->ldisc->ops->flush_buffer)
tty->ldisc->ops->flush_buffer(tty);
}
- unlock_kernel();
/* Fall Thru */
case DIGI_SETA:
if (copy_from_user(&ch->digiext, argp, sizeof(digi_t)))
--
GitLab
From 7479db07011c9c85a65eeb03724193230af0a99d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:49 +0200
Subject: [PATCH 661/863] specialix: Kill the BKL
Use the port mutex instead
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/specialix.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 2c24fcdc722a9..7be456f760c92 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -1863,8 +1863,7 @@ static int sx_set_serial_info(struct specialix_port *port,
return -EFAULT;
}
- lock_kernel();
-
+ mutex_lock(&port->port.mutex);
change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
change_speed |= (tmp.custom_divisor != port->custom_divisor);
@@ -1875,7 +1874,7 @@ static int sx_set_serial_info(struct specialix_port *port,
((tmp.flags & ~ASYNC_USR_MASK) !=
(port->port.flags & ~ASYNC_USR_MASK))) {
func_exit();
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
return -EPERM;
}
port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
@@ -1892,7 +1891,7 @@ static int sx_set_serial_info(struct specialix_port *port,
sx_change_speed(bp, port);
func_exit();
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
return 0;
}
@@ -1906,7 +1905,7 @@ static int sx_get_serial_info(struct specialix_port *port,
func_enter();
memset(&tmp, 0, sizeof(tmp));
- lock_kernel();
+ mutex_lock(&port->port.mutex);
tmp.type = PORT_CIRRUS;
tmp.line = port - sx_port;
tmp.port = bp->base;
@@ -1917,7 +1916,7 @@ static int sx_get_serial_info(struct specialix_port *port,
tmp.closing_wait = port->port.closing_wait * HZ/100;
tmp.custom_divisor = port->custom_divisor;
tmp.xmit_fifo_size = CD186x_NFIFO;
- unlock_kernel();
+ mutex_unlock(&port->port.mutex);
if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
func_exit();
return -EFAULT;
--
GitLab
From 4287341d4dba27ef8048f589e3c0bc683c9f2017 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Wed, 19 May 2010 13:01:56 +0100
Subject: [PATCH 662/863] tty: Fix the digi acceleport driver NULL checks
This now refcounts but doesn't actually check the reference was obtained in
all the places it should.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/digi_acceleport.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index fd35f73b57215..b92070c103cd4 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -609,8 +609,10 @@ static void digi_wakeup_write_lock(struct work_struct *work)
static void digi_wakeup_write(struct usb_serial_port *port)
{
struct tty_struct *tty = tty_port_tty_get(&port->port);
- tty_wakeup(tty);
- tty_kref_put(tty);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
@@ -1682,7 +1684,7 @@ static int digi_read_inb_callback(struct urb *urb)
priv->dp_throttle_restart = 1;
/* receive data */
- if (opcode == DIGI_CMD_RECEIVE_DATA) {
+ if (tty && opcode == DIGI_CMD_RECEIVE_DATA) {
/* get flag from port_status */
flag = 0;
@@ -1763,10 +1765,12 @@ static int digi_read_oob_callback(struct urb *urb)
return -1;
tty = tty_port_tty_get(&port->port);
+
rts = 0;
- rts = tty->termios->c_cflag & CRTSCTS;
+ if (tty)
+ rts = tty->termios->c_cflag & CRTSCTS;
- if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+ if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
/* convert from digi flags to termiox flags */
if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
--
GitLab
From a360fae67bc173942f620d44d1b23cfb5ccaaf96 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:50 +0200
Subject: [PATCH 663/863] synclink: reworking locking a bit
Use the port mutex and port lock to fix the various races. The locking
still isn't totally consistent but its better than before. Wants switching
to the port helpers.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/synclink_gt.c | 12 +++++++++++-
drivers/char/synclinkmp.c | 9 ++++++++-
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 3c7ac6a3ff809..5a602eb7cd2d9 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -675,12 +675,14 @@ static int open(struct tty_struct *tty, struct file *filp)
goto cleanup;
}
+ mutex_lock(&info->port.mutex);
info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
retval = -EBUSY;
spin_unlock_irqrestore(&info->netlock, flags);
+ mutex_unlock(&info->port.mutex);
goto cleanup;
}
info->port.count++;
@@ -692,7 +694,7 @@ static int open(struct tty_struct *tty, struct file *filp)
if (retval < 0)
goto cleanup;
}
-
+ mutex_unlock(&info->port.mutex);
retval = block_til_ready(tty, filp, info);
if (retval) {
DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
@@ -724,12 +726,14 @@ static void close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
@@ -740,17 +744,23 @@ static void close(struct tty_struct *tty, struct file *filp)
static void hangup(struct tty_struct *tty)
{
struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
if (sanity_check(info, tty->name, "hangup"))
return;
DBGINFO(("%s hangup\n", info->device_name));
flush_buffer(tty);
+
+ mutex_lock(&info->port.mutex);
shutdown(info);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
wake_up_interruptible(&info->port.open_wait);
}
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 8da976bd7314d..ac447c7eb572a 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -812,13 +812,15 @@ static void close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(&info->port, tty, filp) == 0)
goto cleanup;
-
+
+ mutex_lock(&info->port.mutex);
if (info->port.flags & ASYNC_INITIALIZED)
wait_until_sent(tty, info->timeout);
flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info);
+ mutex_unlock(&info->port.mutex);
tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
@@ -834,6 +836,7 @@ static void close(struct tty_struct *tty, struct file *filp)
static void hangup(struct tty_struct *tty)
{
SLMP_INFO *info = tty->driver_data;
+ unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s hangup()\n",
@@ -842,12 +845,16 @@ static void hangup(struct tty_struct *tty)
if (sanity_check(info, tty->name, "hangup"))
return;
+ mutex_lock(&info->port.mutex);
flush_buffer(tty);
shutdown(info);
+ spin_lock_irqsave(&info->port.lock, flags);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
wake_up_interruptible(&info->port.open_wait);
}
--
GitLab
From 192251352f912bccfb942ea35801d2357f11f592 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:51 +0200
Subject: [PATCH 664/863] tty: serial - fix various misuses/mishandlings of
port->tty
Make it robust against hang up events. In most cases we can do this simply
by passing the right things in the first place.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/serial_core.c | 109 +++++++++++++++++++----------------
1 file changed, 60 insertions(+), 49 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 7f28307095121..12ee7e0f99cea 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -58,7 +58,7 @@ static struct lock_class_key port_lock_key;
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state,
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
@@ -137,7 +137,7 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
* Startup the port. This will be called once per open. All calls
* will be serialised by the per-port mutex.
*/
-static int uart_startup(struct uart_state *state, int init_hw)
+static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
@@ -152,7 +152,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
* once we have successfully opened the port. Also set
* up the tty->alt_speed kludge
*/
- set_bit(TTY_IO_ERROR, &port->tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
if (uport->type == PORT_UNKNOWN)
return 0;
@@ -177,26 +177,26 @@ static int uart_startup(struct uart_state *state, int init_hw)
/*
* Initialise the hardware port settings.
*/
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
/*
* Setup the RTS and DTR signals once the
* port is open and ready to respond.
*/
- if (port->tty->termios->c_cflag & CBAUD)
+ if (tty->termios->c_cflag & CBAUD)
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
if (port->flags & ASYNC_CTS_FLOW) {
spin_lock_irq(&uport->lock);
if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
- port->tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
spin_unlock_irq(&uport->lock);
}
set_bit(ASYNCB_INITIALIZED, &port->flags);
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
}
if (retval && capable(CAP_SYS_ADMIN))
@@ -210,11 +210,10 @@ static int uart_startup(struct uart_state *state, int init_hw)
* DTR is dropped if the hangup on close termio flag is on. Calls to
* uart_shutdown are serialised by the per-port semaphore.
*/
-static void uart_shutdown(struct uart_state *state)
+static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
- struct tty_struct *tty = port->tty;
/*
* Set the TTY IO error marker
@@ -430,11 +429,10 @@ uart_get_divisor(struct uart_port *port, unsigned int baud)
EXPORT_SYMBOL(uart_get_divisor);
/* FIXME: Consistent locking policy */
-static void
-uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
+ struct ktermios *old_termios)
{
struct tty_port *port = &state->port;
- struct tty_struct *tty = port->tty;
struct uart_port *uport = state->uart_port;
struct ktermios *termios;
@@ -463,8 +461,8 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
uport->ops->set_termios(uport, termios, old_termios);
}
-static inline int
-__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c)
+static inline int __uart_put_char(struct uart_port *port,
+ struct circ_buf *circ, unsigned char c)
{
unsigned long flags;
int ret = 0;
@@ -494,8 +492,8 @@ static void uart_flush_chars(struct tty_struct *tty)
uart_start(tty);
}
-static int
-uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static int uart_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
@@ -675,7 +673,7 @@ static int uart_get_info(struct uart_state *state,
return 0;
}
-static int uart_set_info(struct uart_state *state,
+static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
struct serial_struct __user *newinfo)
{
struct serial_struct new_serial;
@@ -770,7 +768,7 @@ static int uart_set_info(struct uart_state *state,
* We need to shutdown the serial port at the old
* port/type/irq combination.
*/
- uart_shutdown(state);
+ uart_shutdown(tty, state);
}
if (change_port) {
@@ -869,25 +867,27 @@ static int uart_set_info(struct uart_state *state,
"is deprecated.\n", current->comm,
tty_name(port->tty, buf));
}
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
}
} else
- retval = uart_startup(state, 1);
+ retval = uart_startup(tty, state, 1);
exit:
mutex_unlock(&port->mutex);
return retval;
}
-
-/*
- * uart_get_lsr_info - get line status register info.
- * Note: uart_ioctl protects us against hangups.
+/**
+ * uart_get_lsr_info - get line status register info
+ * @tty: tty associated with the UART
+ * @state: UART being queried
+ * @value: returned modem value
+ *
+ * Note: uart_ioctl protects us against hangups.
*/
-static int uart_get_lsr_info(struct uart_state *state,
- unsigned int __user *value)
+static int uart_get_lsr_info(struct tty_struct *tty,
+ struct uart_state *state, unsigned int __user *value)
{
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
unsigned int result;
result = uport->ops->tx_empty(uport);
@@ -900,7 +900,7 @@ static int uart_get_lsr_info(struct uart_state *state,
*/
if (uport->x_char ||
((uart_circ_chars_pending(&state->xmit) > 0) &&
- !port->tty->stopped && !port->tty->hw_stopped))
+ !tty->stopped && !tty->hw_stopped))
result &= ~TIOCSER_TEMT;
return put_user(result, value);
@@ -961,7 +961,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state)
return 0;
}
-static int uart_do_autoconfig(struct uart_state *state)
+static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state)
{
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
@@ -980,7 +980,7 @@ static int uart_do_autoconfig(struct uart_state *state)
ret = -EBUSY;
if (tty_port_users(port) == 1) {
- uart_shutdown(state);
+ uart_shutdown(tty, state);
/*
* If we already have a port type configured,
@@ -999,7 +999,7 @@ static int uart_do_autoconfig(struct uart_state *state)
*/
uport->ops->config_port(uport, flags);
- ret = uart_startup(state, 1);
+ ret = uart_startup(tty, state, 1);
}
mutex_unlock(&port->mutex);
return ret;
@@ -1122,11 +1122,11 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
break;
case TIOCSSERIAL:
- ret = uart_set_info(state, uarg);
+ ret = uart_set_info(tty, state, uarg);
break;
case TIOCSERCONFIG:
- ret = uart_do_autoconfig(state);
+ ret = uart_do_autoconfig(tty, state);
break;
case TIOCSERGWILD: /* obsolete */
@@ -1172,7 +1172,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
*/
switch (cmd) {
case TIOCSERGETLSR: /* Get line status register */
- ret = uart_get_lsr_info(state, uarg);
+ ret = uart_get_lsr_info(tty, state, uarg);
break;
default: {
@@ -1219,7 +1219,7 @@ static void uart_set_termios(struct tty_struct *tty,
return;
}
- uart_change_speed(state, old_termios);
+ uart_change_speed(tty, state, old_termios);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
@@ -1335,7 +1335,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
uart_wait_until_sent(tty, uport->timeout);
}
- uart_shutdown(state);
+ uart_shutdown(tty, state);
uart_flush_buffer(tty);
tty_ldisc_flush(tty);
@@ -1436,7 +1436,7 @@ static void uart_hangup(struct tty_struct *tty)
mutex_lock(&port->mutex);
if (port->flags & ASYNC_NORMAL_ACTIVE) {
uart_flush_buffer(tty);
- uart_shutdown(state);
+ uart_shutdown(tty, state);
port->count = 0;
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
tty_port_tty_set(port, NULL);
@@ -1446,15 +1446,19 @@ static void uart_hangup(struct tty_struct *tty)
mutex_unlock(&port->mutex);
}
-/*
- * Copy across the serial console cflag setting into the termios settings
- * for the initial open of the port. This allows continuity between the
- * kernel settings, and the settings init adopts when it opens the port
- * for the first time.
+/**
+ * uart_update_termios - update the terminal hw settings
+ * @tty: tty associated with UART
+ * @state: UART to update
+ *
+ * Copy across the serial console cflag setting into the termios settings
+ * for the initial open of the port. This allows continuity between the
+ * kernel settings, and the settings init adopts when it opens the port
+ * for the first time.
*/
-static void uart_update_termios(struct uart_state *state)
+static void uart_update_termios(struct tty_struct *tty,
+ struct uart_state *state)
{
- struct tty_struct *tty = state->port.tty;
struct uart_port *port = state->uart_port;
if (uart_console(port) && port->cons->cflag) {
@@ -1471,7 +1475,7 @@ static void uart_update_termios(struct uart_state *state)
/*
* Make termios settings take effect.
*/
- uart_change_speed(state, NULL);
+ uart_change_speed(tty, state, NULL);
/*
* And finally enable the RTS and DTR signals.
@@ -1668,7 +1672,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
/*
* Start up the serial port.
*/
- retval = uart_startup(state, 0);
+ retval = uart_startup(tty, state, 0);
/*
* If we succeeded, wait until the port is ready.
@@ -1683,7 +1687,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
- uart_update_termios(state);
+ uart_update_termios(tty, state);
}
fail:
@@ -2010,9 +2014,13 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
struct tty_port *port = &state->port;
struct device *tty_dev;
struct uart_match match = {uport, drv};
+ struct tty_struct *tty;
mutex_lock(&port->mutex);
+ /* Must be inside the mutex lock until we convert to tty_port */
+ tty = port->tty;
+
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
@@ -2105,9 +2113,12 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
ops->set_mctrl(uport, 0);
spin_unlock_irq(&uport->lock);
if (console_suspend_enabled || !uart_console(uport)) {
+ /* Protected by port mutex for now */
+ struct tty_struct *tty = port->tty;
ret = ops->startup(uport);
if (ret == 0) {
- uart_change_speed(state, NULL);
+ if (tty)
+ uart_change_speed(tty, state, NULL);
spin_lock_irq(&uport->lock);
ops->set_mctrl(uport, uport->mctrl);
ops->start_tx(uport);
@@ -2119,7 +2130,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
* Clear the "initialized" flag so we won't try
* to call the low level drivers shutdown method.
*/
- uart_shutdown(state);
+ uart_shutdown(tty, state);
}
}
--
GitLab
From eab4f5af6b07009d1fc48bac5f3215c0cbfb2fc3 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:52 +0200
Subject: [PATCH 665/863] tty: serial - fix tty back references in termios
One or two drivers go poking back into the tty from the termios setting
routine in unsafe ways. We don't need to pass the tty down because the
[ab]users are just using it to get at things they can get at anyway.
This leaves low_latency setting to sort out along with set_ldisc use.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/21285.c | 10 +++-------
drivers/serial/imx.c | 10 ++++------
drivers/serial/ioc3_serial.c | 9 +++++----
drivers/serial/ioc4_serial.c | 9 +++++----
drivers/serial/max3100.c | 7 ++-----
5 files changed, 19 insertions(+), 26 deletions(-)
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 8681f13450562..d89aa38c5cf04 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -216,7 +216,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
unsigned long flags;
- unsigned int baud, quot, h_lcr;
+ unsigned int baud, quot, h_lcr, b;
/*
* We don't support modem control lines.
@@ -234,12 +234,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
*/
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
-
- if (port->state && port->state->port.tty) {
- struct tty_struct *tty = port->state->port.tty;
- unsigned int b = port->uartclk / (16 * quot);
- tty_encode_baud_rate(tty, b, b);
- }
+ b = port->uartclk / (16 * quot);
+ tty_termios_encode_baud_rate(termios, b, b);
switch (termios->c_cflag & CSIZE) {
case CS5:
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index eacb588a93459..66ecc7ab6daba 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -909,13 +909,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
rational_best_approximation(16 * div * baud, sport->port.uartclk,
1 << 16, 1 << 16, &num, &denom);
- if (port->state && port->state->port.tty) {
- tdiv64 = sport->port.uartclk;
- tdiv64 *= num;
- do_div(tdiv64, denom * 16 * div);
- tty_encode_baud_rate(sport->port.state->port.tty,
+ tdiv64 = sport->port.uartclk;
+ tdiv64 *= num;
+ do_div(tdiv64, denom * 16 * div);
+ tty_termios_encode_baud_rate(termios,
(speed_t)tdiv64, (speed_t)tdiv64);
- }
num -= 1;
denom -= 1;
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index f164ba4eba022..93de907b12088 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -954,12 +954,13 @@ ioc3_change_speed(struct uart_port *the_port,
struct ktermios *new_termios, struct ktermios *old_termios)
{
struct ioc3_port *port = get_ioc3_port(the_port);
- unsigned int cflag;
+ unsigned int cflag, iflag;
int baud;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
+ iflag = new_termios->c_iflag;
switch (cflag & CSIZE) {
case CS5:
@@ -1000,12 +1001,12 @@ ioc3_change_speed(struct uart_port *the_port,
state->port.tty->low_latency = 1;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(state->port.tty)) {
+ if (iflag & IGNBRK) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 8ad28fc64926a..fcfe82653ac8d 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -1685,11 +1685,12 @@ ioc4_change_speed(struct uart_port *the_port,
{
struct ioc4_port *port = get_ioc4_port(the_port, 0);
int baud, bits;
- unsigned cflag;
+ unsigned cflag, iflag;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
+ iflag = new_termios->c_iflag;
switch (cflag & CSIZE) {
case CS5:
@@ -1741,12 +1742,12 @@ ioc4_change_speed(struct uart_port *the_port,
state->port.tty->low_latency = 1;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(state->port.tty)) {
+ if (iflag & IGNBRK) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(state->port.tty))
+ if (iflag & IGNPAR)
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
index 3351c3bd59e40..beb1afa27d8d3 100644
--- a/drivers/serial/max3100.c
+++ b/drivers/serial/max3100.c
@@ -430,17 +430,14 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
int baud = 0;
unsigned cflag;
u32 param_new, param_mask, parity = 0;
- struct tty_struct *tty = s->port.state->port.tty;
dev_dbg(&s->spi->dev, "%s\n", __func__);
- if (!tty)
- return;
cflag = termios->c_cflag;
param_new = 0;
param_mask = 0;
- baud = tty_get_baud_rate(tty);
+ baud = tty_termios_baud_rate(termios);
param_new = s->conf & MAX3100_BAUD;
switch (baud) {
case 300:
@@ -485,7 +482,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
default:
baud = s->baud;
}
- tty_encode_baud_rate(tty, baud, baud);
+ tty_termios_encode_baud_rate(termios, baud, baud);
s->baud = baud;
param_mask |= MAX3100_BAUD;
--
GitLab
From d87d9b7d19f04b16c4406d3c0feeca10090e0ada Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:53 +0200
Subject: [PATCH 666/863] tty: serial - fix tty referencing in set_ldisc
Pass down the ldisc number so that the drivers don't have to peek into the
tty object themselves. This lets us get rid of another case of back referencing
port to tty which we don't want (because of races versus hangup/close).
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/bfin_5xx.c | 7 ++-----
drivers/serial/serial_core.c | 2 +-
include/linux/serial_core.h | 2 +-
3 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 511cbf6878778..a9eff2b18eab2 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -957,15 +957,12 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_serial_set_ldisc(struct uart_port *port)
+static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
{
int line = port->line;
unsigned short val;
- if (line >= port->state->port.tty->driver->num)
- return;
-
- switch (port->state->port.tty->termios->c_line) {
+ switch (ld) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 12ee7e0f99cea..570dca2935e2a 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1194,7 +1194,7 @@ static void uart_set_ldisc(struct tty_struct *tty)
struct uart_port *uport = state->uart_port;
if (uport->ops->set_ldisc)
- uport->ops->set_ldisc(uport);
+ uport->ops->set_ldisc(uport, tty->termios->c_line);
}
static void uart_set_termios(struct tty_struct *tty,
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f10db6e5f3b59..32928161fab63 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -220,7 +220,7 @@ struct uart_ops {
void (*flush_buffer)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
- void (*set_ldisc)(struct uart_port *);
+ void (*set_ldisc)(struct uart_port *, int new);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
--
GitLab
From e33ac1c10b6baaac68d18d931e120d8b96e8c5f8 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:54 +0200
Subject: [PATCH 667/863] vc: Locking clean up
The virtual console layer uses the BKL for various things that don't really
need it. Clean them out.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/selection.c | 4 ++++
drivers/char/vt.c | 7 ++++---
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index f97b9e8480645..6e79340d732f8 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -26,6 +26,7 @@
#include <linux/selection.h>
#include <linux/tiocl.h>
#include <linux/console.h>
+#include <linux/smp_lock.h>
/* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */
#define isspace(c) ((c) == ' ')
@@ -312,6 +313,8 @@ int paste_selection(struct tty_struct *tty)
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
+ lock_kernel();
+
acquire_console_sem();
poke_blanked_console();
release_console_sem();
@@ -335,5 +338,6 @@ int paste_selection(struct tty_struct *tty)
__set_current_state(TASK_RUNNING);
tty_ldisc_deref(ld);
+ unlock_kernel();
return 0;
}
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 82f64ac211911..9f67ad919a4ad 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -287,8 +287,12 @@ static inline unsigned short *screenpos(struct vc_data *vc, int offset, int view
return p;
}
+/* Called from the keyboard irq path.. */
static inline void scrolldelta(int lines)
{
+ /* FIXME */
+ /* scrolldelta needs some kind of consistency lock, but the BKL was
+ and still is not protecting versus the scheduled back end */
scrollback_delta += lines;
schedule_console_callback();
}
@@ -2616,8 +2620,6 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
return -EFAULT;
ret = 0;
- lock_kernel();
-
switch (type)
{
case TIOCL_SETSEL:
@@ -2692,7 +2694,6 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
ret = -EINVAL;
break;
}
- unlock_kernel();
return ret;
}
--
GitLab
From ff917ba4f1a6189f90ed2c975984d6a1a1dc553d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:55 +0200
Subject: [PATCH 668/863] tty: Make vt's have a tty_port
The vt layer isn't safely handling reference counts to tty object on the input
side. Add a tty port structure to the vt layer in order to implement this using
the standard helpers.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/vt.c | 2 ++
include/linux/console_struct.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 9f67ad919a4ad..295af823a074f 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -783,6 +783,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */
if (!vc)
return -ENOMEM;
vc_cons[currcons].d = vc;
+ tty_port_init(&vc->port);
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
visual_init(vc, currcons, 1);
if (!*vc->vc_uni_pagedir_loc)
@@ -2921,6 +2922,7 @@ static int __init con_init(void)
for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) {
vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT);
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
+ tty_port_init(&vc->port);
visual_init(vc, currcons, 1);
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
vc_init(vc, vc->vc_rows, vc->vc_cols,
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index d7d9acdccffb2..25bf67f541fc1 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -21,6 +21,8 @@ struct vt_struct;
#define NPAR 16
struct vc_data {
+ struct tty_port port; /* Upper level data */
+
unsigned short vc_num; /* Console number */
unsigned int vc_cols; /* [#] Console size */
unsigned int vc_rows;
--
GitLab
From 8ce73264b75be4d5ed480440ac32dfc1f25ff678 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:56 +0200
Subject: [PATCH 669/863] tty: Move the vt_tty field from the vc_data into the
standard tty_port
This takes all the tty references through the expected interface points so
we can refcount them.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/keyboard.c | 10 +++++-----
drivers/char/vt.c | 10 +++++-----
drivers/char/vt_ioctl.c | 2 +-
include/linux/console_struct.h | 1 -
4 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 25be2102a60a0..a7ca75212bfe1 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -299,7 +299,7 @@ int kbd_rate(struct kbd_repeat *rep)
*/
static void put_queue(struct vc_data *vc, int ch)
{
- struct tty_struct *tty = vc->vc_tty;
+ struct tty_struct *tty = vc->port.tty;
if (tty) {
tty_insert_flip_char(tty, ch, 0);
@@ -309,7 +309,7 @@ static void put_queue(struct vc_data *vc, int ch)
static void puts_queue(struct vc_data *vc, char *cp)
{
- struct tty_struct *tty = vc->vc_tty;
+ struct tty_struct *tty = vc->port.tty;
if (!tty)
return;
@@ -485,7 +485,7 @@ static void fn_show_ptregs(struct vc_data *vc)
static void fn_hold(struct vc_data *vc)
{
- struct tty_struct *tty = vc->vc_tty;
+ struct tty_struct *tty = vc->port.tty;
if (rep || !tty)
return;
@@ -563,7 +563,7 @@ static void fn_inc_console(struct vc_data *vc)
static void fn_send_intr(struct vc_data *vc)
{
- struct tty_struct *tty = vc->vc_tty;
+ struct tty_struct *tty = vc->port.tty;
if (!tty)
return;
@@ -1162,7 +1162,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
struct keyboard_notifier_param param = { .vc = vc, .value = keycode, .down = down };
int rc;
- tty = vc->vc_tty;
+ tty = vc->port.tty;
if (tty && (!tty->driver_data)) {
/* No driver data? Strange. Okay we fix it then. */
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 295af823a074f..c734f9b1263a7 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -973,12 +973,12 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
* Resize a virtual console as seen from the console end of things. We
* use the common vc_do_resize methods to update the structures. The
* caller must hold the console sem to protect console internals and
- * vc->vc_tty
+ * vc->port.tty
*/
int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
{
- return vc_do_resize(vc->vc_tty, vc, cols, rows);
+ return vc_do_resize(vc->port.tty, vc, cols, rows);
}
/**
@@ -2807,12 +2807,12 @@ static int con_open(struct tty_struct *tty, struct file *filp)
struct vc_data *vc = vc_cons[currcons].d;
/* Still being freed */
- if (vc->vc_tty) {
+ if (vc->port.tty) {
release_console_sem();
return -ERESTARTSYS;
}
tty->driver_data = vc;
- vc->vc_tty = tty;
+ vc->port.tty = tty;
if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
@@ -2840,7 +2840,7 @@ static void con_shutdown(struct tty_struct *tty)
struct vc_data *vc = tty->driver_data;
BUG_ON(vc == NULL);
acquire_console_sem();
- vc->vc_tty = NULL;
+ vc->port.tty = NULL;
release_console_sem();
tty_shutdown(tty);
}
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index cb19dbc521364..72dcfb2dc1262 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -1369,7 +1369,7 @@ void vc_SAK(struct work_struct *work)
acquire_console_sem();
vc = vc_con->d;
if (vc) {
- tty = vc->vc_tty;
+ tty = vc->port.tty;
/*
* SAK should also work in all raw modes and reset
* them properly.
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index 25bf67f541fc1..7f0c32908568a 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -58,7 +58,6 @@ struct vc_data {
/* VT terminal data */
unsigned int vc_state; /* Escape sequence parser state */
unsigned int vc_npar,vc_par[NPAR]; /* Parameters of current escape sequence */
- struct tty_struct *vc_tty; /* TTY we are attached to */
/* data for manual vt switching */
struct vt_mode vt_mode;
struct pid *vt_pid;
--
GitLab
From 61cd8a21d8a9fb4b11111270cf2d3aa919c20624 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:57 +0200
Subject: [PATCH 670/863] serial: Change the wait for carrier locking
We want to push the lock/unlock into the helper functions so that we
can prepare to move to using the tty_port helper. The expansion initially
comes out a bit ugly but its worth the temporary expansion IMHO just so
we can produce a nice testable series of changes.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/serial_core.c | 44 ++++++++++++++++++++++++++++--------
1 file changed, 35 insertions(+), 9 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 570dca2935e2a..424b1c7e50c4c 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1272,6 +1272,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
struct uart_state *state = tty->driver_data;
struct tty_port *port;
struct uart_port *uport;
+ unsigned long flags;
BUG_ON(!kernel_locked());
@@ -1284,9 +1285,12 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
pr_debug("uart_close(%d) called\n", uport->line);
mutex_lock(&port->mutex);
+ spin_lock_irqsave(&port->lock, flags);
- if (tty_hung_up_p(filp))
+ if (tty_hung_up_p(filp)) {
+ spin_unlock_irqrestore(&port->lock, flags);
goto done;
+ }
if ((tty->count == 1) && (port->count != 1)) {
/*
@@ -1305,8 +1309,10 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
tty->name, port->count);
port->count = 0;
}
- if (port->count)
+ if (port->count) {
+ spin_unlock_irqrestore(&port->lock, flags);
goto done;
+ }
/*
* Now we wait for the transmit buffer to clear; and we notify
@@ -1314,6 +1320,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* setting tty->closing.
*/
tty->closing = 1;
+ spin_unlock_irqrestore(&port->lock, flags);
if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
@@ -1340,20 +1347,26 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
tty_ldisc_flush(tty);
- tty->closing = 0;
tty_port_tty_set(port, NULL);
+ spin_lock_irqsave(&port->lock, flags);
+ tty->closing = 0;
if (port->blocked_open) {
+ spin_unlock_irqrestore(&port->lock, flags);
if (port->close_delay)
msleep_interruptible(port->close_delay);
+ spin_lock_irqsave(&port->lock, flags);
} else if (!uart_console(uport)) {
+ spin_unlock_irqrestore(&port->lock, flags);
uart_change_pm(state, 3);
+ spin_lock_irqsave(&port->lock, flags);
}
/*
* Wake up anyone trying to open this port.
*/
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ spin_unlock_irqrestore(&port->lock, flags);
wake_up_interruptible(&port->open_wait);
done:
@@ -1429,6 +1442,7 @@ static void uart_hangup(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
struct tty_port *port = &state->port;
+ unsigned long flags;
BUG_ON(!kernel_locked());
pr_debug("uart_hangup(%d)\n", state->uart_port->line);
@@ -1437,8 +1451,10 @@ static void uart_hangup(struct tty_struct *tty)
if (port->flags & ASYNC_NORMAL_ACTIVE) {
uart_flush_buffer(tty);
uart_shutdown(tty, state);
+ spin_lock_irqsave(&port->lock, flags);
port->count = 0;
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ spin_unlock_irqrestore(&port->lock, flags);
tty_port_tty_set(port, NULL);
wake_up_interruptible(&port->open_wait);
wake_up_interruptible(&port->delta_msr_wait);
@@ -1496,9 +1512,13 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
unsigned int mctrl;
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
+ port->count--;
port->blocked_open++;
- port->count--;
+ spin_unlock_irqrestore(&port->lock, flags);
add_wait_queue(&port->open_wait, &wait);
while (1) {
@@ -1535,23 +1555,26 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
* not set RTS here - we want to make sure we catch
* the data from the modem.
*/
- if (port->tty->termios->c_cflag & CBAUD)
+ if (port->tty->termios->c_cflag & CBAUD) {
+ mutex_lock(&port->mutex);
uart_set_mctrl(uport, TIOCM_DTR);
+ mutex_unlock(&port->mutex);
+ }
/*
* and wait for the carrier to indicate that the
* modem is ready for us.
*/
+ mutex_lock(&port->mutex);
spin_lock_irq(&uport->lock);
uport->ops->enable_ms(uport);
mctrl = uport->ops->get_mctrl(uport);
spin_unlock_irq(&uport->lock);
+ mutex_unlock(&port->mutex);
if (mctrl & TIOCM_CAR)
break;
- mutex_unlock(&port->mutex);
schedule();
- mutex_lock(&port->mutex);
if (signal_pending(current))
break;
@@ -1559,8 +1582,11 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
set_current_state(TASK_RUNNING);
remove_wait_queue(&port->open_wait, &wait);
- port->count++;
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
+ port->count++;
port->blocked_open--;
+ spin_unlock_irqrestore(&port->lock, flags);
if (signal_pending(current))
return -ERESTARTSYS;
@@ -1677,9 +1703,9 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
/*
* If we succeeded, wait until the port is ready.
*/
+ mutex_unlock(&port->mutex);
if (retval == 0)
retval = uart_block_til_ready(filp, state);
- mutex_unlock(&port->mutex);
/*
* If this is the first open to succeed, adjust things to suit.
--
GitLab
From de0c8cb314cc737c47a00de33cd6246accf94192 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:58 +0200
Subject: [PATCH 671/863] serial: add port helpers
We can make this the same as the ones that will be needed by the tty_port
helper logic that we want to move to but still call them from the existing
code base.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/serial_core.c | 51 ++++++++++++++++++++++++++----------
1 file changed, 37 insertions(+), 14 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 424b1c7e50c4c..2379045e08710 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1501,6 +1501,34 @@ static void uart_update_termios(struct tty_struct *tty,
}
}
+static int uart_carrier_raised(struct tty_port *port)
+{
+ struct uart_state *state = container_of(port, struct uart_state, port);
+ struct uart_port *uport = state->uart_port;
+ int mctrl;
+ mutex_lock(&port->mutex);
+ spin_lock_irq(&uport->lock);
+ uport->ops->enable_ms(uport);
+ mctrl = uport->ops->get_mctrl(uport);
+ spin_unlock_irq(&uport->lock);
+ mutex_unlock(&port->mutex);
+ if (mctrl & TIOCM_CAR)
+ return 1;
+ return 0;
+}
+
+static void uart_dtr_rts(struct tty_port *port, int onoff)
+{
+ struct uart_state *state = container_of(port, struct uart_state, port);
+ struct uart_port *uport = state->uart_port;
+ mutex_lock(&port->mutex);
+ if (onoff)
+ uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
+ else
+ uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
+ mutex_unlock(&port->mutex);
+}
+
/*
* Block the open until the port is ready. We must be called with
* the per-port semaphore held.
@@ -1509,9 +1537,7 @@ static int
uart_block_til_ready(struct file *filp, struct uart_state *state)
{
DECLARE_WAITQUEUE(wait, current);
- struct uart_port *uport = state->uart_port;
struct tty_port *port = &state->port;
- unsigned int mctrl;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
@@ -1555,23 +1581,14 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
* not set RTS here - we want to make sure we catch
* the data from the modem.
*/
- if (port->tty->termios->c_cflag & CBAUD) {
- mutex_lock(&port->mutex);
- uart_set_mctrl(uport, TIOCM_DTR);
- mutex_unlock(&port->mutex);
- }
+ if (port->tty->termios->c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
/*
* and wait for the carrier to indicate that the
* modem is ready for us.
*/
- mutex_lock(&port->mutex);
- spin_lock_irq(&uport->lock);
- uport->ops->enable_ms(uport);
- mctrl = uport->ops->get_mctrl(uport);
- spin_unlock_irq(&uport->lock);
- mutex_unlock(&port->mutex);
- if (mctrl & TIOCM_CAR)
+ if (tty_port_carrier_raised(port))
break;
schedule();
@@ -2349,6 +2366,11 @@ static const struct tty_operations uart_ops = {
#endif
};
+static const struct tty_port_operations uart_port_ops = {
+ .carrier_raised = uart_carrier_raised,
+ .dtr_rts = uart_dtr_rts,
+};
+
/**
* uart_register_driver - register a driver with the uart core layer
* @drv: low level driver structure
@@ -2405,6 +2427,7 @@ int uart_register_driver(struct uart_driver *drv)
struct tty_port *port = &state->port;
tty_port_init(port);
+ port->ops = &uart_port_ops;
port->close_delay = 500; /* .5 seconds */
port->closing_wait = 30000; /* 30 seconds */
tasklet_init(&state->tlet, uart_tasklet_action,
--
GitLab
From 24fcc7c8cd0fcabcf37d455abe3501b3196fcf64 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:52:59 +0200
Subject: [PATCH 672/863] serial: trim locking on the helpers
The port mutex protects port->tty, but these paths never need to walk from
port->tty. They do need the low level lock as the API expects that but they
already also take it.
Thus we can drop the extra mutex lock calls here.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/serial_core.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 2379045e08710..0603e0d46d330 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1506,12 +1506,10 @@ static int uart_carrier_raised(struct tty_port *port)
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = state->uart_port;
int mctrl;
- mutex_lock(&port->mutex);
spin_lock_irq(&uport->lock);
uport->ops->enable_ms(uport);
mctrl = uport->ops->get_mctrl(uport);
spin_unlock_irq(&uport->lock);
- mutex_unlock(&port->mutex);
if (mctrl & TIOCM_CAR)
return 1;
return 0;
@@ -1521,12 +1519,11 @@ static void uart_dtr_rts(struct tty_port *port, int onoff)
{
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = state->uart_port;
- mutex_lock(&port->mutex);
+
if (onoff)
uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
else
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
- mutex_unlock(&port->mutex);
}
/*
--
GitLab
From 74c2107759dc6efaa1b9127014be58a742a1e7ac Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 1 Jun 2010 22:53:00 +0200
Subject: [PATCH 673/863] serial: Use block_til_ready helper
Our code now rather closely resembles the helper, so switch to it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/serial_core.c | 87 +-----------------------------------
1 file changed, 1 insertion(+), 86 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 0603e0d46d330..a55751a12c380 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1526,91 +1526,6 @@ static void uart_dtr_rts(struct tty_port *port, int onoff)
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
}
-/*
- * Block the open until the port is ready. We must be called with
- * the per-port semaphore held.
- */
-static int
-uart_block_til_ready(struct file *filp, struct uart_state *state)
-{
- DECLARE_WAITQUEUE(wait, current);
- struct tty_port *port = &state->port;
- unsigned long flags;
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
- spin_unlock_irqrestore(&port->lock, flags);
-
- add_wait_queue(&port->open_wait, &wait);
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- /*
- * If we have been hung up, tell userspace/restart open.
- */
- if (tty_hung_up_p(filp) || port->tty == NULL)
- break;
-
- /*
- * If the port has been closed, tell userspace/restart open.
- */
- if (!(port->flags & ASYNC_INITIALIZED))
- break;
-
- /*
- * If non-blocking mode is set, or CLOCAL mode is set,
- * we don't want to wait for the modem status lines to
- * indicate that the port is ready.
- *
- * Also, if the port is not enabled/configured, we want
- * to allow the open to succeed here. Note that we will
- * have set TTY_IO_ERROR for a non-existant port.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (port->tty->termios->c_cflag & CLOCAL) ||
- (port->tty->flags & (1 << TTY_IO_ERROR)))
- break;
-
- /*
- * Set DTR to allow modem to know we're waiting. Do
- * not set RTS here - we want to make sure we catch
- * the data from the modem.
- */
- if (port->tty->termios->c_cflag & CBAUD)
- tty_port_raise_dtr_rts(port);
-
- /*
- * and wait for the carrier to indicate that the
- * modem is ready for us.
- */
- if (tty_port_carrier_raised(port))
- break;
-
- schedule();
-
- if (signal_pending(current))
- break;
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
- spin_unlock_irqrestore(&port->lock, flags);
-
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- if (!port->tty || tty_hung_up_p(filp))
- return -EAGAIN;
-
- return 0;
-}
-
static struct uart_state *uart_get(struct uart_driver *drv, int line)
{
struct uart_state *state;
@@ -1719,7 +1634,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
*/
mutex_unlock(&port->mutex);
if (retval == 0)
- retval = uart_block_til_ready(filp, state);
+ retval = tty_port_block_til_ready(port, tty, filp);
/*
* If this is the first open to succeed, adjust things to suit.
--
GitLab
From 3f582b8c11014e4ce310d9839fb335164195333f Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 29 Jun 2010 22:31:40 +0200
Subject: [PATCH 674/863] serial: fix termios settings in open
Move termios initialization in open into uart_dtr_rts to make sure
it always gets called when necessary. Based on a suggestion from
Alan Cox.
Alan writes:
Ok this sort of makes sense. Something isn't getting initialised and both
getty and minicom will do a termios set which is sorting it out.
This is occurring because the generic block_til_ready sets
ASYNCB_NORMAL_ACTIVE so the termios updating gets skipped.
This patch should cure it and then we can think about doing it more
elegantly by getting the serial layer to use tty_port_open, kfifo and
the like and removing the tons of repeated crap in all the drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/serial_core.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index a55751a12c380..3d2acc2265f72 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1520,8 +1520,16 @@ static void uart_dtr_rts(struct tty_port *port, int onoff)
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = state->uart_port;
- if (onoff)
+ if (onoff) {
uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
+
+ /*
+ * If this is the first open to succeed,
+ * adjust things to suit.
+ */
+ if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags))
+ uart_update_termios(port->tty, state);
+ }
else
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
}
@@ -1636,15 +1644,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
if (retval == 0)
retval = tty_port_block_til_ready(port, tty, filp);
- /*
- * If this is the first open to succeed, adjust things to suit.
- */
- if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
- set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
-
- uart_update_termios(tty, state);
- }
-
fail:
return retval;
}
--
GitLab
From ec79d6056de58511d8e46d9ae59d3878f958dc3e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:01 +0200
Subject: [PATCH 675/863] tty: replace BKL with a new tty_lock
As a preparation for replacing the big kernel lock
in the TTY layer, wrap all the callers in new
macros tty_lock, tty_lock_nested and tty_unlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/amiserial.c | 16 ++---
drivers/char/briq_panel.c | 6 +-
drivers/char/n_hdlc.c | 16 ++---
drivers/char/n_r3964.c | 8 +--
drivers/char/pty.c | 4 +-
drivers/char/selection.c | 4 +-
drivers/char/serial167.c | 4 +-
drivers/char/sx.c | 12 ++--
drivers/char/tty_io.c | 115 ++++++++++++++++++---------------
drivers/char/tty_ldisc.c | 24 +++----
drivers/char/vc_screen.c | 4 +-
drivers/char/vt_ioctl.c | 10 +--
drivers/serial/68360serial.c | 4 +-
drivers/serial/crisv10.c | 4 +-
drivers/serial/serial_core.c | 10 +--
drivers/video/console/vgacon.c | 4 +-
include/linux/tty.h | 31 +++++++++
17 files changed, 161 insertions(+), 115 deletions(-)
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 4f8d60c25a980..1b21a7adeb58f 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1072,7 +1072,7 @@ static int get_serial_info(struct async_struct * info,
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
- lock_kernel();
+ tty_lock();
tmp.type = state->type;
tmp.line = state->line;
tmp.port = state->port;
@@ -1083,7 +1083,7 @@ static int get_serial_info(struct async_struct * info,
tmp.close_delay = state->close_delay;
tmp.closing_wait = state->closing_wait;
tmp.custom_divisor = state->custom_divisor;
- unlock_kernel();
+ tty_unlock();
if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
return -EFAULT;
return 0;
@@ -1100,14 +1100,14 @@ static int set_serial_info(struct async_struct * info,
if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
return -EFAULT;
- lock_kernel();
+ tty_lock();
state = info->state;
old_state = *state;
change_irq = new_serial.irq != state->irq;
change_port = (new_serial.port != state->port);
if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) {
- unlock_kernel();
+ tty_unlock();
return -EINVAL;
}
@@ -1127,7 +1127,7 @@ static int set_serial_info(struct async_struct * info,
}
if (new_serial.baud_base < 9600) {
- unlock_kernel();
+ tty_unlock();
return -EINVAL;
}
@@ -1163,7 +1163,7 @@ static int set_serial_info(struct async_struct * info,
}
} else
retval = startup(info);
- unlock_kernel();
+ tty_unlock();
return retval;
}
@@ -1538,7 +1538,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
orig_jiffies = jiffies;
- lock_kernel();
+ tty_lock_nested(); /* tty_wait_until_sent is called from lots of places */
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -1579,7 +1579,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
__set_current_state(TASK_RUNNING);
- unlock_kernel();
+ tty_unlock();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c
index 555cd93c2ee51..d5fa113afe372 100644
--- a/drivers/char/briq_panel.c
+++ b/drivers/char/briq_panel.c
@@ -67,15 +67,15 @@ static void set_led(char state)
static int briq_panel_open(struct inode *ino, struct file *filep)
{
- lock_kernel();
+ tty_lock();
/* enforce single access, vfd_is_open is protected by BKL */
if (vfd_is_open) {
- unlock_kernel();
+ tty_unlock();
return -EBUSY;
}
vfd_is_open = 1;
- unlock_kernel();
+ tty_unlock();
return 0;
}
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index c68118efad844..47d32281032c7 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -598,18 +598,18 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
return -EFAULT;
}
- lock_kernel();
+ tty_lock();
for (;;) {
if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
- unlock_kernel();
+ tty_unlock();
return -EIO;
}
n_hdlc = tty2n_hdlc (tty);
if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
tty != n_hdlc->tty) {
- unlock_kernel();
+ tty_unlock();
return 0;
}
@@ -619,13 +619,13 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
/* no data */
if (file->f_flags & O_NONBLOCK) {
- unlock_kernel();
+ tty_unlock();
return -EAGAIN;
}
interruptible_sleep_on (&tty->read_wait);
if (signal_pending(current)) {
- unlock_kernel();
+ tty_unlock();
return -EINTR;
}
}
@@ -648,7 +648,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
kfree(rbuf);
else
n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf);
- unlock_kernel();
+ tty_unlock();
return ret;
} /* end of n_hdlc_tty_read() */
@@ -691,7 +691,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
count = maxframe;
}
- lock_kernel();
+ tty_lock();
add_wait_queue(&tty->write_wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
@@ -731,7 +731,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
n_hdlc_send_frames(n_hdlc,tty);
}
- unlock_kernel();
+ tty_unlock();
return error;
} /* end of n_hdlc_tty_write() */
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index c1d8b54c816d3..f4bd2591e39fd 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -1067,7 +1067,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
TRACE_L("read()");
- lock_kernel();
+ tty_lock();
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
@@ -1109,7 +1109,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
}
ret = -EPERM;
unlock:
- unlock_kernel();
+ tty_unlock();
return ret;
}
@@ -1158,7 +1158,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
pHeader->locks = 0;
pHeader->owner = NULL;
- lock_kernel();
+ tty_lock();
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
@@ -1177,7 +1177,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
add_tx_queue(pInfo, pHeader);
trigger_transmit(pInfo);
- unlock_kernel();
+ tty_unlock();
return 0;
}
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index b640ef29be1c8..622e21ca9a5c8 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -692,9 +692,9 @@ static int ptmx_open(struct inode *inode, struct file *filp)
{
int ret;
- lock_kernel();
+ tty_lock();
ret = __ptmx_open(inode, filp);
- unlock_kernel();
+ tty_unlock();
return ret;
}
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index 6e79340d732f8..85211a3a58112 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -313,7 +313,7 @@ int paste_selection(struct tty_struct *tty)
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
- lock_kernel();
+ tty_lock_nested(); /* always called with BTM from vt_ioctl */
acquire_console_sem();
poke_blanked_console();
@@ -338,6 +338,6 @@ int paste_selection(struct tty_struct *tty)
__set_current_state(TASK_RUNNING);
tty_ldisc_deref(ld);
- unlock_kernel();
+ tty_unlock();
return 0;
}
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index ecbe479c7d68f..90b3ec0aabdd6 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1505,7 +1505,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */
#endif
- lock_kernel();
+ tty_lock();
switch (cmd) {
case CYGETMON:
@@ -1561,7 +1561,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
default:
ret_val = -ENOIOCTLCMD;
}
- unlock_kernel();
+ tty_unlock();
#ifdef SERIAL_DEBUG_OTHER
printk("cy_ioctl done\n");
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index a81ec4fcf6ff4..5b24db4ff7f10 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1699,7 +1699,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
- lock_kernel();
+ tty_lock();
sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);
@@ -1848,7 +1848,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
break;
}
out:
- unlock_kernel();
+ tty_unlock();
func_exit();
return rc;
}
@@ -1859,7 +1859,7 @@ static int sx_break(struct tty_struct *tty, int flag)
int rv;
func_enter();
- lock_kernel();
+ tty_lock();
if (flag)
rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK);
@@ -1868,7 +1868,7 @@ static int sx_break(struct tty_struct *tty, int flag)
if (rv != 1)
printk(KERN_ERR "sx: couldn't send break (%x).\n",
read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat)));
- unlock_kernel();
+ tty_unlock();
func_exit();
return 0;
}
@@ -1909,7 +1909,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp,
/* func_enter2(); */
rc = 0;
- lock_kernel();
+ tty_lock();
switch (cmd) {
case TIOCGSERIAL:
rc = gs_getserial(&port->gs, argp);
@@ -1921,7 +1921,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp,
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
+ tty_unlock();
/* func_exit(); */
return rc;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 507441ac6edbc..5ee9081a560f1 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -149,6 +149,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd,
#else
#define tty_compat_ioctl NULL
#endif
+static int __tty_fasync(int fd, struct file *filp, int on);
static int tty_fasync(int fd, struct file *filp, int on);
static void release_tty(struct tty_struct *tty, int idx);
static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
@@ -483,7 +484,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
* remains intact.
*
* Locking:
- * BKL
+ * BTM
* redirect lock for undoing redirection
* file list lock for manipulating list of ttys
* tty_ldisc_lock from called functions
@@ -513,8 +514,11 @@ static void do_tty_hangup(struct work_struct *work)
}
spin_unlock(&redirect_lock);
- /* inuse_filps is protected by the single kernel lock */
- lock_kernel();
+ /* inuse_filps is protected by the single tty lock,
+ this really needs to change if we want to flush the
+ workqueue with the lock held */
+ tty_lock_nested(); /* called with BTM held from pty_close and
+ others */
check_tty_count(tty, "do_tty_hangup");
file_list_lock();
@@ -525,7 +529,7 @@ static void do_tty_hangup(struct work_struct *work)
if (filp->f_op->write != tty_write)
continue;
closecount++;
- tty_fasync(-1, filp, 0); /* can't block */
+ __tty_fasync(-1, filp, 0); /* can't block */
filp->f_op = &hung_up_tty_fops;
}
file_list_unlock();
@@ -594,7 +598,7 @@ static void do_tty_hangup(struct work_struct *work)
*/
set_bit(TTY_HUPPED, &tty->flags);
tty_ldisc_enable(tty);
- unlock_kernel();
+ tty_unlock();
if (f)
fput(f);
}
@@ -696,7 +700,8 @@ static void session_clear_tty(struct pid *session)
* exiting; it is 0 if called by the ioctl TIOCNOTTY.
*
* Locking:
- * BKL is taken for hysterical raisins
+ * BTM is taken for hysterical raisins, and held when
+ * called from no_tty().
* tty_mutex is taken to protect tty
* ->siglock is taken to protect ->signal/->sighand
* tasklist_lock is taken to walk process list for sessions
@@ -714,10 +719,10 @@ void disassociate_ctty(int on_exit)
tty = get_current_tty();
if (tty) {
tty_pgrp = get_pid(tty->pgrp);
- lock_kernel();
+ tty_lock_nested(); /* see above */
if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
- unlock_kernel();
+ tty_unlock();
tty_kref_put(tty);
} else if (on_exit) {
struct pid *old_pgrp;
@@ -774,9 +779,9 @@ void disassociate_ctty(int on_exit)
void no_tty(void)
{
struct task_struct *tsk = current;
- lock_kernel();
+ tty_lock();
disassociate_ctty(0);
- unlock_kernel();
+ tty_unlock();
proc_clear_tty(tsk);
}
@@ -1013,19 +1018,19 @@ static inline ssize_t do_tty_write(
* We don't put it into the syslog queue right now maybe in the future if
* really needed.
*
- * We must still hold the BKL and test the CLOSING flag for the moment.
+ * We must still hold the BTM and test the CLOSING flag for the moment.
*/
void tty_write_message(struct tty_struct *tty, char *msg)
{
if (tty) {
mutex_lock(&tty->atomic_write_lock);
- lock_kernel();
+ tty_lock();
if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
- unlock_kernel();
+ tty_unlock();
tty->ops->write(tty, msg, strlen(msg));
} else
- unlock_kernel();
+ tty_unlock();
tty_write_unlock(tty);
}
return;
@@ -1208,18 +1213,18 @@ static int tty_driver_install_tty(struct tty_driver *driver,
int ret;
if (driver->ops->install) {
- lock_kernel();
+ tty_lock_nested(); /* already called with BTM held */
ret = driver->ops->install(driver, tty);
- unlock_kernel();
+ tty_unlock();
return ret;
}
if (tty_init_termios(tty) == 0) {
- lock_kernel();
+ tty_lock_nested();
tty_driver_kref_get(driver);
tty->count++;
driver->ttys[idx] = tty;
- unlock_kernel();
+ tty_unlock();
return 0;
}
return -ENOMEM;
@@ -1312,14 +1317,15 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
struct tty_struct *tty;
int retval;
- lock_kernel();
+ tty_lock_nested(); /* always called with tty lock held already */
+
/* Check if pty master is being opened multiple times */
if (driver->subtype == PTY_TYPE_MASTER &&
(driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) {
- unlock_kernel();
+ tty_unlock();
return ERR_PTR(-EIO);
}
- unlock_kernel();
+ tty_unlock();
/*
* First time open is complex, especially for PTY devices.
@@ -1363,9 +1369,9 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
if (printk_ratelimit())
printk(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
- lock_kernel();
+ tty_lock_nested();
release_tty(tty, idx);
- unlock_kernel();
+ tty_unlock();
return ERR_PTR(retval);
}
@@ -1512,10 +1518,10 @@ int tty_release(struct inode *inode, struct file *filp)
if (tty_paranoia_check(tty, inode, "tty_release_dev"))
return 0;
- lock_kernel();
+ tty_lock();
check_tty_count(tty, "tty_release_dev");
- tty_fasync(-1, filp, 0);
+ __tty_fasync(-1, filp, 0);
idx = tty->index;
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -1527,18 +1533,18 @@ int tty_release(struct inode *inode, struct file *filp)
if (idx < 0 || idx >= tty->driver->num) {
printk(KERN_DEBUG "tty_release_dev: bad idx when trying to "
"free (%s)\n", tty->name);
- unlock_kernel();
+ tty_unlock();
return 0;
}
if (!devpts) {
if (tty != tty->driver->ttys[idx]) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty "
"for (%s)\n", idx, tty->name);
return 0;
}
if (tty->termios != tty->driver->termios[idx]) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios "
"for (%s)\n",
idx, tty->name);
@@ -1556,21 +1562,21 @@ int tty_release(struct inode *inode, struct file *filp)
if (tty->driver->other &&
!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
if (o_tty != tty->driver->other->ttys[idx]) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: other->table[%d] "
"not o_tty for (%s)\n",
idx, tty->name);
return 0 ;
}
if (o_tty->termios != tty->driver->other->termios[idx]) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: other->termios[%d] "
"not o_termios for (%s)\n",
idx, tty->name);
return 0;
}
if (o_tty->link != tty) {
- unlock_kernel();
+ tty_unlock();
printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n");
return 0;
}
@@ -1579,7 +1585,7 @@ int tty_release(struct inode *inode, struct file *filp)
if (tty->ops->close)
tty->ops->close(tty, filp);
- unlock_kernel();
+ tty_unlock();
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
* any waiters on tty->read_wait or tty->write_wait. We test the
@@ -1602,7 +1608,7 @@ int tty_release(struct inode *inode, struct file *filp)
opens on /dev/tty */
mutex_lock(&tty_mutex);
- lock_kernel();
+ tty_lock();
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
@@ -1633,7 +1639,7 @@ int tty_release(struct inode *inode, struct file *filp)
printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue "
"active!\n", tty_name(tty, buf));
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
schedule();
}
@@ -1698,7 +1704,7 @@ int tty_release(struct inode *inode, struct file *filp)
/* check whether both sides are closing ... */
if (!tty_closing || (o_tty && !o_tty_closing)) {
- unlock_kernel();
+ tty_unlock();
return 0;
}
@@ -1718,7 +1724,7 @@ int tty_release(struct inode *inode, struct file *filp)
/* Make this pty number available for reallocation */
if (devpts)
devpts_kill_index(inode, idx);
- unlock_kernel();
+ tty_unlock();
return 0;
}
@@ -1760,12 +1766,12 @@ static int tty_open(struct inode *inode, struct file *filp)
retval = 0;
mutex_lock(&tty_mutex);
- lock_kernel();
+ tty_lock();
if (device == MKDEV(TTYAUX_MAJOR, 0)) {
tty = get_current_tty();
if (!tty) {
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return -ENXIO;
}
@@ -1797,14 +1803,14 @@ static int tty_open(struct inode *inode, struct file *filp)
goto got_driver;
}
}
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return -ENODEV;
}
driver = get_tty_driver(device, &index);
if (!driver) {
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return -ENODEV;
}
@@ -1814,7 +1820,7 @@ static int tty_open(struct inode *inode, struct file *filp)
tty = tty_driver_lookup_tty(driver, inode, index);
if (IS_ERR(tty)) {
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return PTR_ERR(tty);
}
@@ -1830,7 +1836,7 @@ static int tty_open(struct inode *inode, struct file *filp)
mutex_unlock(&tty_mutex);
tty_driver_kref_put(driver);
if (IS_ERR(tty)) {
- unlock_kernel();
+ tty_unlock();
return PTR_ERR(tty);
}
@@ -1862,11 +1868,11 @@ static int tty_open(struct inode *inode, struct file *filp)
#endif
tty_release(inode, filp);
if (retval != -ERESTARTSYS) {
- unlock_kernel();
+ tty_unlock();
return retval;
}
if (signal_pending(current)) {
- unlock_kernel();
+ tty_unlock();
return retval;
}
schedule();
@@ -1875,14 +1881,14 @@ static int tty_open(struct inode *inode, struct file *filp)
*/
if (filp->f_op == &hung_up_tty_fops)
filp->f_op = &tty_fops;
- unlock_kernel();
+ tty_unlock();
goto retry_open;
}
- unlock_kernel();
+ tty_unlock();
mutex_lock(&tty_mutex);
- lock_kernel();
+ tty_lock();
spin_lock_irq(¤t->sighand->siglock);
if (!noctty &&
current->signal->leader &&
@@ -1890,7 +1896,7 @@ static int tty_open(struct inode *inode, struct file *filp)
tty->session == NULL)
__proc_set_tty(current, tty);
spin_unlock_irq(¤t->sighand->siglock);
- unlock_kernel();
+ tty_unlock();
mutex_unlock(&tty_mutex);
return 0;
}
@@ -1926,13 +1932,12 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait)
return ret;
}
-static int tty_fasync(int fd, struct file *filp, int on)
+static int __tty_fasync(int fd, struct file *filp, int on)
{
struct tty_struct *tty;
unsigned long flags;
int retval = 0;
- lock_kernel();
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync"))
goto out;
@@ -1966,7 +1971,15 @@ static int tty_fasync(int fd, struct file *filp, int on)
}
retval = 0;
out:
- unlock_kernel();
+ return retval;
+}
+
+static int tty_fasync(int fd, struct file *filp, int on)
+{
+ int retval;
+ tty_lock();
+ retval = __tty_fasync(fd, filp, on);
+ tty_unlock();
return retval;
}
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 500e740ec5e46..97681ffd6cbd4 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -440,6 +440,8 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
*
* A helper opening method. Also a convenient debugging and check
* point.
+ *
+ * Locking: always called with BTM already held.
*/
static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
@@ -447,10 +449,10 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
if (ld->ops->open) {
int ret;
- /* BKL here locks verus a hangup event */
- lock_kernel();
+ /* BTM here locks versus a hangup event */
+ tty_lock_nested(); /* always held here already */
ret = ld->ops->open(tty);
- unlock_kernel();
+ tty_unlock();
return ret;
}
return 0;
@@ -553,7 +555,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
- lock_kernel();
+ tty_lock();
/*
* We need to look at the tty locking here for pty/tty pairs
* when both sides try to change in parallel.
@@ -567,12 +569,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
*/
if (tty->ldisc->ops->num == ldisc) {
- unlock_kernel();
+ tty_unlock();
tty_ldisc_put(new_ldisc);
return 0;
}
- unlock_kernel();
+ tty_unlock();
/*
* Problem: What do we do if this blocks ?
* We could deadlock here
@@ -594,7 +596,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
mutex_lock(&tty->ldisc_mutex);
}
- lock_kernel();
+ tty_lock();
set_bit(TTY_LDISC_CHANGING, &tty->flags);
@@ -607,7 +609,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
o_ldisc = tty->ldisc;
- unlock_kernel();
+ tty_unlock();
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
@@ -633,14 +635,14 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
flush_scheduled_work();
mutex_lock(&tty->ldisc_mutex);
- lock_kernel();
+ tty_lock();
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_put(new_ldisc);
- unlock_kernel();
+ tty_unlock();
return -EIO;
}
@@ -682,7 +684,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
if (o_work)
schedule_delayed_work(&o_tty->buf.work, 1);
mutex_unlock(&tty->ldisc_mutex);
- unlock_kernel();
+ tty_unlock();
return retval;
}
diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c
index c1791a63d99d4..bcce46c96b887 100644
--- a/drivers/char/vc_screen.c
+++ b/drivers/char/vc_screen.c
@@ -463,10 +463,10 @@ vcs_open(struct inode *inode, struct file *filp)
unsigned int currcons = iminor(inode) & 127;
int ret = 0;
- lock_kernel();
+ tty_lock();
if(currcons && !vc_cons_allocated(currcons-1))
ret = -ENXIO;
- unlock_kernel();
+ tty_unlock();
return ret;
}
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 72dcfb2dc1262..cf87c53362290 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -509,7 +509,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
console = vc->vc_num;
- lock_kernel();
+ tty_lock();
if (!vc_cons_allocated(console)) { /* impossible? */
ret = -ENOIOCTLCMD;
@@ -1336,7 +1336,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
ret = -ENOIOCTLCMD;
}
out:
- unlock_kernel();
+ tty_unlock();
return ret;
eperm:
ret = -EPERM;
@@ -1503,7 +1503,7 @@ long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
console = vc->vc_num;
- lock_kernel();
+ tty_lock();
if (!vc_cons_allocated(console)) { /* impossible? */
ret = -ENOIOCTLCMD;
@@ -1571,11 +1571,11 @@ long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
goto fallback;
}
out:
- unlock_kernel();
+ tty_unlock();
return ret;
fallback:
- unlock_kernel();
+ tty_unlock();
return vt_ioctl(tty, file, cmd, arg);
}
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 768612f8e41e2..16f5f2fab0323 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1705,7 +1705,7 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
printk("jiff=%lu...", jiffies);
#endif
- lock_kernel();
+ tty_lock_nested(); /* always held already since we come from ->close */
/* We go through the loop at least once because we can't tell
* exactly when the last character exits the shifter. There can
* be at least two characters waiting to be sent after the buffers
@@ -1734,7 +1734,7 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
bdp--;
} while (bdp->status & BD_SC_READY);
current->state = TASK_RUNNING;
- unlock_kernel();
+ tty_unlock();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 30626440a062d..f848e188deae3 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3935,7 +3935,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
* Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
* R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
*/
- lock_kernel();
+ tty_lock_nested(); /* locked already when coming from close */
orig_jiffies = jiffies;
while (info->xmit.head != info->xmit.tail || /* More in send queue */
(*info->ostatusadr & 0x007f) || /* more in FIFO */
@@ -3952,7 +3952,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
curr_time_usec - info->last_tx_active_usec;
}
set_current_state(TASK_RUNNING);
- unlock_kernel();
+ tty_unlock();
}
/*
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 3d2acc2265f72..851d7c29132b8 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1274,7 +1274,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
struct uart_port *uport;
unsigned long flags;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
if (!state)
return;
@@ -1382,7 +1382,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
if (port->type == PORT_UNKNOWN || port->fifosize == 0)
return;
- lock_kernel();
+ tty_lock_nested(); /* already locked when coming from close */
/*
* Set the check interval to be 1/5 of the estimated time to
@@ -1429,7 +1429,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
set_current_state(TASK_RUNNING); /* might not be needed */
- unlock_kernel();
+ tty_unlock();
}
/*
@@ -1444,7 +1444,7 @@ static void uart_hangup(struct tty_struct *tty)
struct tty_port *port = &state->port;
unsigned long flags;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
pr_debug("uart_hangup(%d)\n", state->uart_port->line);
mutex_lock(&port->mutex);
@@ -1578,7 +1578,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
struct tty_port *port;
int retval, line = tty->index;
- BUG_ON(!kernel_locked());
+ BUG_ON(!tty_locked());
pr_debug("uart_open(%d) called\n", line);
/*
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 182dd6f8aadd0..71970057c118f 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1108,7 +1108,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
charmap += 4 * cmapsz;
#endif
- unlock_kernel();
+ tty_unlock();
spin_lock_irq(&vga_lock);
/* First, the Sequencer */
vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1);
@@ -1192,7 +1192,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0);
}
spin_unlock_irq(&vga_lock);
- lock_kernel();
+ tty_lock();
return 0;
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 2df60e4ff40e0..6ead6b60c7439 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -13,6 +13,7 @@
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <asm/system.h>
@@ -576,5 +577,35 @@ extern int vt_ioctl(struct tty_struct *tty, struct file *file,
extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
+/* functions for preparation of BKL removal */
+
+/*
+ * tty_lock_nested get the tty_lock while potentially holding it
+ *
+ * The Big TTY Mutex is a recursive lock, meaning you can take it
+ * from a thread that is already holding it.
+ * This is bad for a number of reasons, so tty_lock_nested should
+ * really be used as rarely as possible. If a code location can
+ * be shown to never get called with this held already, it should
+ * use tty_lock() instead.
+ */
+static inline void __lockfunc tty_lock_nested(void) __acquires(kernel_lock)
+{
+ lock_kernel();
+}
+static inline void tty_lock(void) __acquires(kernel_lock)
+{
+#ifdef CONFIG_LOCK_KERNEL
+ /* kernel_locked is 1 for !CONFIG_LOCK_KERNEL */
+ WARN_ON(kernel_locked());
+#endif
+ lock_kernel();
+}
+static inline void tty_unlock(void) __releases(kernel_lock)
+{
+ unlock_kernel();
+}
+#define tty_locked() (kernel_locked())
+
#endif /* __KERNEL__ */
#endif
--
GitLab
From 64ba3dc3143d94bbe935722aa17fa516b232bc83 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:02 +0200
Subject: [PATCH 676/863] tty: never hold BTM while getting tty_mutex
tty_mutex is never taken with the BTM held, except for
two corner cases that are worked around here.
We give up the BTM before calling tty_release() in the
error path of tty_open().
Similarly, we reorder the locking in ptmx_open()
to get tty_mutex before the BTM.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/pty.c | 24 +++++++++++-------------
drivers/char/tty_io.c | 12 ++++++------
2 files changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 622e21ca9a5c8..de22ea952832c 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -647,7 +647,7 @@ static const struct tty_operations pty_unix98_ops = {
* allocated_ptys_lock handles the list of free pty numbers
*/
-static int __ptmx_open(struct inode *inode, struct file *filp)
+static int ptmx_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
int retval;
@@ -656,11 +656,14 @@ static int __ptmx_open(struct inode *inode, struct file *filp)
nonseekable_open(inode, filp);
/* find a device that is not in use. */
+ tty_lock();
index = devpts_new_index(inode);
+ tty_unlock();
if (index < 0)
return index;
mutex_lock(&tty_mutex);
+ tty_lock();
tty = tty_init_dev(ptm_driver, index, 1);
mutex_unlock(&tty_mutex);
@@ -678,24 +681,19 @@ static int __ptmx_open(struct inode *inode, struct file *filp)
goto out1;
retval = ptm_driver->ops->open(tty, filp);
- if (!retval)
- return 0;
+ if (retval)
+ goto out2;
out1:
+ tty_unlock();
+ return retval;
+out2:
+ tty_unlock();
tty_release(inode, filp);
return retval;
out:
devpts_kill_index(inode, index);
- return retval;
-}
-
-static int ptmx_open(struct inode *inode, struct file *filp)
-{
- int ret;
-
- tty_lock();
- ret = __ptmx_open(inode, filp);
tty_unlock();
- return ret;
+ return retval;
}
static struct file_operations ptmx_fops;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 5ee9081a560f1..bb22cf495435c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1866,19 +1866,19 @@ static int tty_open(struct inode *inode, struct file *filp)
printk(KERN_DEBUG "error %d in opening %s...", retval,
tty->name);
#endif
+ tty_unlock(); /* need to call tty_release without BTM */
tty_release(inode, filp);
- if (retval != -ERESTARTSYS) {
- tty_unlock();
+ if (retval != -ERESTARTSYS)
return retval;
- }
- if (signal_pending(current)) {
- tty_unlock();
+
+ if (signal_pending(current))
return retval;
- }
+
schedule();
/*
* Need to reset f_op in case a hangup happened.
*/
+ tty_lock();
if (filp->f_op == &hung_up_tty_fops)
filp->f_op = &tty_fops;
tty_unlock();
--
GitLab
From 83ceb67d7dfe6aedf0e47dd6887b7b3c753542b2 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:03 +0200
Subject: [PATCH 677/863] tty: fix console_sem lock order
vgacon_do_font_op releases and reacquires the BTM while holding
console_sem. This violates the rule that BTM has to be the
outer lock whenever we hold both.
There does not seem to be any reason to give up the BTM here,
so just stop doing that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/video/console/vgacon.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 71970057c118f..54e32c513610f 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1108,7 +1108,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
charmap += 4 * cmapsz;
#endif
- tty_unlock();
spin_lock_irq(&vga_lock);
/* First, the Sequencer */
vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1);
@@ -1192,7 +1191,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0);
}
spin_unlock_irq(&vga_lock);
- tty_lock();
return 0;
}
--
GitLab
From 4e608671674b62e97166f903830d5553e37970e8 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:04 +0200
Subject: [PATCH 678/863] cdc-acm: remove dead code
The wait_event_interruptible_timeout in acm_port_down is
never reached. Remove it to avoid possible deadlocks
with the big tty mutex if someone were to start using
the blocking version of acm_port_down.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/class/cdc-acm.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 89d260d6b0319..1833b3a71515b 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -636,19 +636,13 @@ static void acm_tty_unregister(struct acm *acm)
static int acm_tty_chars_in_buffer(struct tty_struct *tty);
-static void acm_port_down(struct acm *acm, int drain)
+static void acm_port_down(struct acm *acm)
{
int i, nr = acm->rx_buflimit;
mutex_lock(&open_mutex);
if (acm->dev) {
usb_autopm_get_interface(acm->control);
acm_set_control(acm, acm->ctrlout = 0);
- /* try letting the last writes drain naturally */
- if (drain) {
- wait_event_interruptible_timeout(acm->drain_wait,
- (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev,
- ACM_CLOSE_TIMEOUT * HZ);
- }
usb_kill_urb(acm->ctrlurb);
for (i = 0; i < ACM_NW; i++)
usb_kill_urb(acm->wb[i].urb);
@@ -664,7 +658,7 @@ static void acm_tty_hangup(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
tty_port_hangup(&acm->port);
- acm_port_down(acm, 0);
+ acm_port_down(acm);
}
static void acm_tty_close(struct tty_struct *tty, struct file *filp)
@@ -685,7 +679,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&open_mutex);
return;
}
- acm_port_down(acm, 0);
+ acm_port_down(acm);
tty_port_close_end(&acm->port, tty);
tty_port_tty_set(&acm->port, NULL);
}
--
GitLab
From be1bc2889a4db4961ef69f47fb471ecae9f23ade Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:05 +0200
Subject: [PATCH 679/863] tty: introduce wait_event_interruptible_tty
Calling wait_event_interruptible implicitly
releases the BKL when it sleeps, but we need
to do this explcitly when we have converted
it to a mutex.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/cyclades.c | 2 +-
drivers/char/istallion.c | 12 ++++++++----
drivers/char/n_r3964.c | 2 +-
drivers/char/tty_port.c | 2 +-
drivers/char/vt_ioctl.c | 5 ++++-
drivers/serial/crisv10.c | 4 ++--
include/linux/tty.h | 42 ++++++++++++++++++++++++++++++++++++++++
7 files changed, 59 insertions(+), 10 deletions(-)
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 51acfe39a438f..27aad94223321 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -1607,7 +1607,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->port.close_wait,
+ wait_event_interruptible_tty(info->port.close_wait,
!(info->port.flags & ASYNC_CLOSING));
return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 5e9a81d8ebcfc..be28391adb79b 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -954,7 +954,7 @@ static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned l
* order of opens and closes may not be preserved across shared
* memory, so we must wait until it is complete.
*/
- wait_event_interruptible(portp->raw_wait,
+ wait_event_interruptible_tty(portp->raw_wait,
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current)) {
return -ERESTARTSYS;
@@ -989,7 +989,7 @@ static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned l
set_bit(ST_OPENING, &portp->state);
spin_unlock_irqrestore(&brd_lock, flags);
- wait_event_interruptible(portp->raw_wait,
+ wait_event_interruptible_tty(portp->raw_wait,
!test_bit(ST_OPENING, &portp->state));
if (signal_pending(current))
rc = -ERESTARTSYS;
@@ -1020,7 +1020,7 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned
* occurs on this port.
*/
if (wait) {
- wait_event_interruptible(portp->raw_wait,
+ wait_event_interruptible_tty(portp->raw_wait,
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current)) {
return -ERESTARTSYS;
@@ -1052,7 +1052,7 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned
* to come back.
*/
rc = 0;
- wait_event_interruptible(portp->raw_wait,
+ wait_event_interruptible_tty(portp->raw_wait,
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current))
rc = -ERESTARTSYS;
@@ -1073,6 +1073,10 @@ static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned
static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
{
+ /*
+ * no need for wait_event_tty because clearing ST_CMDING cannot block
+ * on BTM
+ */
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_CMDING, &portp->state));
if (signal_pending(current))
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index f4bd2591e39fd..a98290d7a2c58 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -1079,7 +1079,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
goto unlock;
}
/* block until there is a message: */
- wait_event_interruptible(pInfo->read_wait,
+ wait_event_interruptible_tty(pInfo->read_wait,
(pMsg = remove_msg(pInfo, pClient)));
}
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index a3bd1d0b66cfe..35eb30402f188 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -231,7 +231,7 @@ int tty_port_block_til_ready(struct tty_port *port,
/* block if port is in the process of being closed */
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- wait_event_interruptible(port->close_wait,
+ wait_event_interruptible_tty(port->close_wait,
!(port->flags & ASYNC_CLOSING));
if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index cf87c53362290..2bbeaaea46e9b 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -133,7 +133,7 @@ static void vt_event_wait(struct vt_event_wait *vw)
list_add(&vw->list, &vt_events);
spin_unlock_irqrestore(&vt_event_lock, flags);
/* Wait for it to pass */
- wait_event_interruptible(vt_event_waitqueue, vw->done);
+ wait_event_interruptible_tty(vt_event_waitqueue, vw->done);
/* Dequeue it */
spin_lock_irqsave(&vt_event_lock, flags);
list_del(&vw->list);
@@ -1761,10 +1761,13 @@ int vt_move_to_console(unsigned int vt, int alloc)
return -EIO;
}
release_console_sem();
+ tty_lock();
if (vt_waitactive(vt + 1)) {
pr_debug("Suspend: Can't switch VCs.");
+ tty_unlock();
return -EINTR;
}
+ tty_unlock();
return prev;
}
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index f848e188deae3..94bfb9f238e1a 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3992,7 +3992,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->close_wait,
+ wait_event_interruptible_tty(info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
@@ -4150,7 +4150,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->close_wait,
+ wait_event_interruptible_tty(info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 6ead6b60c7439..955d72ea71c01 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -607,5 +607,47 @@ static inline void tty_unlock(void) __releases(kernel_lock)
}
#define tty_locked() (kernel_locked())
+/*
+ * wait_event_interruptible_tty -- wait for a condition with the tty lock held
+ *
+ * The condition we are waiting for might take a long time to
+ * become true, or might depend on another thread taking the
+ * BTM. In either case, we need to drop the BTM to guarantee
+ * forward progress. This is a leftover from the conversion
+ * from the BKL and should eventually get removed as the BTM
+ * falls out of use.
+ *
+ * Do not use in new code.
+ */
+#define wait_event_interruptible_tty(wq, condition) \
+({ \
+ int __ret = 0; \
+ if (!(condition)) { \
+ __wait_event_interruptible_tty(wq, condition, __ret); \
+ } \
+ __ret; \
+})
+
+#define __wait_event_interruptible_tty(wq, condition, ret) \
+do { \
+ DEFINE_WAIT(__wait); \
+ \
+ for (;;) { \
+ prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE); \
+ if (condition) \
+ break; \
+ if (!signal_pending(current)) { \
+ tty_unlock(); \
+ schedule(); \
+ tty_lock(); \
+ continue; \
+ } \
+ ret = -ERESTARTSYS; \
+ break; \
+ } \
+ finish_wait(&wq, &__wait); \
+} while (0)
+
+
#endif /* __KERNEL__ */
#endif
--
GitLab
From 60af22d2ed490554cc92c8d0fed0b5b9cf687568 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:06 +0200
Subject: [PATCH 680/863] tty: reorder ldisc locking
We need to release the BTM in paste_selection() when
sleeping in tty_ldisc_ref_wait to avoid deadlocks
with tty_ldisc_enable.
In tty_set_ldisc, we now always grab the BTM before
taking the ldisc_mutex in order to avoid AB-BA
deadlocks between the two.
tty_ldisc_halt potentially blocks on a workqueue
function that takes the BTM, so we must release
the BTM before calling it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/selection.c | 9 +++++++--
drivers/char/tty_ldisc.c | 24 ++++++++++++++++++++----
2 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index 85211a3a58112..75889cd9375f0 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -319,8 +319,13 @@ int paste_selection(struct tty_struct *tty)
poke_blanked_console();
release_console_sem();
- ld = tty_ldisc_ref_wait(tty);
-
+ ld = tty_ldisc_ref(tty);
+ if (!ld) {
+ tty_unlock();
+ ld = tty_ldisc_ref_wait(tty);
+ tty_lock();
+ }
+
add_wait_queue(&vc->paste_wait, &wait);
while (sel_buffer && sel_buffer_lth > pasted) {
set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 97681ffd6cbd4..0f494799da890 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -582,6 +582,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
tty_wait_until_sent(tty, 0);
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
/*
@@ -591,13 +592,13 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
mutex_unlock(&tty->ldisc_mutex);
+ tty_unlock();
wait_event(tty_ldisc_wait,
test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
}
- tty_lock();
-
set_bit(TTY_LDISC_CHANGING, &tty->flags);
/*
@@ -634,8 +635,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
flush_scheduled_work();
- mutex_lock(&tty->ldisc_mutex);
tty_lock();
+ mutex_lock(&tty->ldisc_mutex);
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
@@ -782,7 +783,20 @@ void tty_ldisc_hangup(struct tty_struct *tty)
* Avoid racing set_ldisc or tty_ldisc_release
*/
mutex_lock(&tty->ldisc_mutex);
- tty_ldisc_halt(tty);
+
+ /*
+ * this is like tty_ldisc_halt, but we need to give up
+ * the BTM before calling cancel_delayed_work_sync,
+ * which may need to wait for another function taking the BTM
+ */
+ clear_bit(TTY_LDISC, &tty->flags);
+ tty_unlock();
+ cancel_delayed_work_sync(&tty->buf.work);
+ mutex_unlock(&tty->ldisc_mutex);
+
+ tty_lock();
+ mutex_lock(&tty->ldisc_mutex);
+
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
it means auditing a lot of other paths so this is
@@ -853,8 +867,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
* race with the set_ldisc code path.
*/
+ tty_unlock();
tty_ldisc_halt(tty);
flush_scheduled_work();
+ tty_lock();
mutex_lock(&tty->ldisc_mutex);
/*
--
GitLab
From 203652192634c1fce5e79df0a8ff2fabfaefd3ab Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:07 +0200
Subject: [PATCH 681/863] tty: untangle locking of wait_until_sent
Some wait_until_sent versions require the big
tty mutex, others don't and some callers of
wait_until_sent already hold it while other don't.
That leads to recursive use of the BTM in these
functions, which we're trying to get rid of.
This turns all cleans up the locking there so
that the driver's wait_until_sent function
never takes the BTM itself if it is already
called with that lock held.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/amiserial.c | 11 +++++++++--
drivers/serial/68360serial.c | 2 --
drivers/serial/crisv10.c | 2 --
drivers/serial/serial_core.c | 31 ++++++++++++++++++++++---------
4 files changed, 31 insertions(+), 15 deletions(-)
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 1b21a7adeb58f..8228e61bb54df 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1528,6 +1528,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
{
struct async_struct * info = tty->driver_data;
unsigned long orig_jiffies, char_time;
+ int tty_was_locked = tty_locked();
int lsr;
if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
@@ -1538,7 +1539,12 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
orig_jiffies = jiffies;
- tty_lock_nested(); /* tty_wait_until_sent is called from lots of places */
+ /*
+ * tty_wait_until_sent is called from lots of places,
+ * with or without the BTM.
+ */
+ if (!tty_was_locked)
+ tty_lock();
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -1579,7 +1585,8 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
__set_current_state(TASK_RUNNING);
- tty_unlock();
+ if (!tty_was_locked)
+ tty_unlock();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 16f5f2fab0323..edcf1cc089d11 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1705,7 +1705,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
printk("jiff=%lu...", jiffies);
#endif
- tty_lock_nested(); /* always held already since we come from ->close */
/* We go through the loop at least once because we can't tell
* exactly when the last character exits the shifter. There can
* be at least two characters waiting to be sent after the buffers
@@ -1734,7 +1733,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
bdp--;
} while (bdp->status & BD_SC_READY);
current->state = TASK_RUNNING;
- tty_unlock();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 94bfb9f238e1a..8e356c5eeae0e 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3935,7 +3935,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
* Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
* R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
*/
- tty_lock_nested(); /* locked already when coming from close */
orig_jiffies = jiffies;
while (info->xmit.head != info->xmit.tail || /* More in send queue */
(*info->ostatusadr & 0x007f) || /* more in FIFO */
@@ -3952,7 +3951,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
curr_time_usec - info->last_tx_active_usec;
}
set_current_state(TASK_RUNNING);
- tty_unlock();
}
/*
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 851d7c29132b8..cd8511298bcb7 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -60,7 +60,7 @@ static struct lock_class_key port_lock_key;
static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
struct ktermios *old_termios);
-static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
+static void __uart_wait_until_sent(struct uart_port *port, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
/*
@@ -1322,8 +1322,16 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
tty->closing = 1;
spin_unlock_irqrestore(&port->lock, flags);
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
+ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ /*
+ * hack: open-coded tty_wait_until_sent to avoid
+ * recursive tty_lock
+ */
+ long timeout = msecs_to_jiffies(port->closing_wait);
+ if (wait_event_interruptible_timeout(tty->write_wait,
+ !tty_chars_in_buffer(tty), timeout) >= 0)
+ __uart_wait_until_sent(uport, timeout);
+ }
/*
* At this point, we stop accepting input. To do this, we
@@ -1339,7 +1347,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
- uart_wait_until_sent(tty, uport->timeout);
+ __uart_wait_until_sent(uport, uport->timeout);
}
uart_shutdown(tty, state);
@@ -1373,17 +1381,13 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&port->mutex);
}
-static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
+static void __uart_wait_until_sent(struct uart_port *port, int timeout)
{
- struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->uart_port;
unsigned long char_time, expire;
if (port->type == PORT_UNKNOWN || port->fifosize == 0)
return;
- tty_lock_nested(); /* already locked when coming from close */
-
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -1429,6 +1433,15 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
set_current_state(TASK_RUNNING); /* might not be needed */
+}
+
+static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->uart_port;
+
+ tty_lock();
+ __uart_wait_until_sent(port, timeout);
tty_unlock();
}
--
GitLab
From ddcd9fb66ae7f448b517242c10a31d4e17bcad45 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:08 +0200
Subject: [PATCH 682/863] tty: remove tty_lock_nested
This changes all remaining users of tty_lock_nested
to be non-recursive, which lets us kill this function.
As a consequence, we won't need to keep the lock count
any more, which allows more simplifications later.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/pty.c | 2 +-
drivers/char/selection.c | 4 ++--
drivers/char/tty_io.c | 41 ++++++++++++++++++++--------------------
drivers/char/tty_ldisc.c | 3 +--
include/linux/tty.h | 16 +---------------
5 files changed, 25 insertions(+), 41 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index de22ea952832c..f2d7a76fab541 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -62,7 +62,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
if (tty->driver == ptm_driver)
devpts_pty_kill(tty->link);
#endif
- tty_vhangup(tty->link);
+ tty_vhangup_locked(tty->link);
}
}
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index 75889cd9375f0..ebae344ce9104 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -313,7 +313,8 @@ int paste_selection(struct tty_struct *tty)
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
- tty_lock_nested(); /* always called with BTM from vt_ioctl */
+ /* always called with BTM from vt_ioctl */
+ WARN_ON(!tty_locked());
acquire_console_sem();
poke_blanked_console();
@@ -343,6 +344,5 @@ int paste_selection(struct tty_struct *tty)
__set_current_state(TASK_RUNNING);
tty_ldisc_deref(ld);
- tty_unlock();
return 0;
}
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index bb22cf495435c..dcf7d368639ed 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -492,10 +492,8 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
* tasklist_lock to walk task list for hangup event
* ->siglock to protect ->signal/->sighand
*/
-static void do_tty_hangup(struct work_struct *work)
+void tty_vhangup_locked(struct tty_struct *tty)
{
- struct tty_struct *tty =
- container_of(work, struct tty_struct, hangup_work);
struct file *cons_filp = NULL;
struct file *filp, *f = NULL;
struct task_struct *p;
@@ -517,8 +515,6 @@ static void do_tty_hangup(struct work_struct *work)
/* inuse_filps is protected by the single tty lock,
this really needs to change if we want to flush the
workqueue with the lock held */
- tty_lock_nested(); /* called with BTM held from pty_close and
- others */
check_tty_count(tty, "do_tty_hangup");
file_list_lock();
@@ -598,11 +594,20 @@ static void do_tty_hangup(struct work_struct *work)
*/
set_bit(TTY_HUPPED, &tty->flags);
tty_ldisc_enable(tty);
- tty_unlock();
if (f)
fput(f);
}
+static void do_tty_hangup(struct work_struct *work)
+{
+ struct tty_struct *tty =
+ container_of(work, struct tty_struct, hangup_work);
+
+ tty_lock();
+ tty_vhangup_locked(tty);
+ tty_unlock();
+}
+
/**
* tty_hangup - trigger a hangup event
* @tty: tty to hangup
@@ -638,7 +643,9 @@ void tty_vhangup(struct tty_struct *tty)
printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
#endif
- do_tty_hangup(&tty->hangup_work);
+ tty_lock();
+ tty_vhangup_locked(tty);
+ tty_unlock();
}
EXPORT_SYMBOL(tty_vhangup);
@@ -719,10 +726,12 @@ void disassociate_ctty(int on_exit)
tty = get_current_tty();
if (tty) {
tty_pgrp = get_pid(tty->pgrp);
- tty_lock_nested(); /* see above */
- if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
- tty_vhangup(tty);
- tty_unlock();
+ if (on_exit) {
+ tty_lock();
+ if (tty->driver->type != TTY_DRIVER_TYPE_PTY)
+ tty_vhangup_locked(tty);
+ tty_unlock();
+ }
tty_kref_put(tty);
} else if (on_exit) {
struct pid *old_pgrp;
@@ -1213,18 +1222,14 @@ static int tty_driver_install_tty(struct tty_driver *driver,
int ret;
if (driver->ops->install) {
- tty_lock_nested(); /* already called with BTM held */
ret = driver->ops->install(driver, tty);
- tty_unlock();
return ret;
}
if (tty_init_termios(tty) == 0) {
- tty_lock_nested();
tty_driver_kref_get(driver);
tty->count++;
driver->ttys[idx] = tty;
- tty_unlock();
return 0;
}
return -ENOMEM;
@@ -1317,15 +1322,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
struct tty_struct *tty;
int retval;
- tty_lock_nested(); /* always called with tty lock held already */
-
/* Check if pty master is being opened multiple times */
if (driver->subtype == PTY_TYPE_MASTER &&
(driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) {
- tty_unlock();
return ERR_PTR(-EIO);
}
- tty_unlock();
/*
* First time open is complex, especially for PTY devices.
@@ -1369,9 +1370,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
if (printk_ratelimit())
printk(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
- tty_lock_nested();
release_tty(tty, idx);
- tty_unlock();
return ERR_PTR(retval);
}
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 0f494799da890..412f9775d19c5 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -450,9 +450,8 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
if (ld->ops->open) {
int ret;
/* BTM here locks versus a hangup event */
- tty_lock_nested(); /* always held here already */
+ WARN_ON(!tty_locked());
ret = ld->ops->open(tty);
- tty_unlock();
return ret;
}
return 0;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 955d72ea71c01..0fbafb0b69bf2 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -417,6 +417,7 @@ extern int is_ignored(int sig);
extern int tty_signal(int sig, struct tty_struct *tty);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
+extern void tty_vhangup_locked(struct tty_struct *tty);
extern void tty_vhangup_self(void);
extern void tty_unhangup(struct file *filp);
extern int tty_hung_up_p(struct file *filp);
@@ -578,21 +579,6 @@ extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
/* functions for preparation of BKL removal */
-
-/*
- * tty_lock_nested get the tty_lock while potentially holding it
- *
- * The Big TTY Mutex is a recursive lock, meaning you can take it
- * from a thread that is already holding it.
- * This is bad for a number of reasons, so tty_lock_nested should
- * really be used as rarely as possible. If a code location can
- * be shown to never get called with this held already, it should
- * use tty_lock() instead.
- */
-static inline void __lockfunc tty_lock_nested(void) __acquires(kernel_lock)
-{
- lock_kernel();
-}
static inline void tty_lock(void) __acquires(kernel_lock)
{
#ifdef CONFIG_LOCK_KERNEL
--
GitLab
From b07471fa51358ce64cc25e1501544502362e4404 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 6 Aug 2010 21:40:30 +0200
Subject: [PATCH 683/863] tty: implement BTM as mutex instead of BKL
The tty locking now follows the rules for mutexes, so
we can replace the BKL usage with a new subsystem
wide mutex.
Using a regular mutex here will change the behaviour
when blocked on the BTM from spinning to sleeping,
but that should not be visible to the user.
Using the mutex also means that all the BTM is now
covered by lockdep.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/Makefile | 1 +
drivers/char/tty_mutex.c | 47 ++++++++++++++++++++++++++++++++++++++++
include/linux/tty.h | 18 +++++----------
3 files changed, 53 insertions(+), 13 deletions(-)
create mode 100644 drivers/char/tty_mutex.c
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 273cee1cc77bb..dc96416606051 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -9,6 +9,7 @@ FONTMAPFILE = cp437.uni
obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o
+obj-y += tty_mutex.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-y += misc.o
diff --git a/drivers/char/tty_mutex.c b/drivers/char/tty_mutex.c
new file mode 100644
index 0000000000000..133697540c738
--- /dev/null
+++ b/drivers/char/tty_mutex.c
@@ -0,0 +1,47 @@
+/*
+ * drivers/char/tty_lock.c
+ */
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/semaphore.h>
+#include <linux/sched.h>
+
+/*
+ * The 'big tty mutex'
+ *
+ * This mutex is taken and released by tty_lock() and tty_unlock(),
+ * replacing the older big kernel lock.
+ * It can no longer be taken recursively, and does not get
+ * released implicitly while sleeping.
+ *
+ * Don't use in new code.
+ */
+static DEFINE_MUTEX(big_tty_mutex);
+struct task_struct *__big_tty_mutex_owner;
+EXPORT_SYMBOL_GPL(__big_tty_mutex_owner);
+
+/*
+ * Getting the big tty mutex.
+ */
+void __lockfunc tty_lock(void)
+{
+ struct task_struct *task = current;
+
+ WARN_ON(__big_tty_mutex_owner == task);
+
+ mutex_lock(&big_tty_mutex);
+ __big_tty_mutex_owner = task;
+}
+EXPORT_SYMBOL(tty_lock);
+
+void __lockfunc tty_unlock(void)
+{
+ struct task_struct *task = current;
+
+ WARN_ON(__big_tty_mutex_owner != task);
+ __big_tty_mutex_owner = NULL;
+
+ mutex_unlock(&big_tty_mutex);
+}
+EXPORT_SYMBOL(tty_unlock);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 0fbafb0b69bf2..1437da3ddc629 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -578,20 +578,12 @@ extern int vt_ioctl(struct tty_struct *tty, struct file *file,
extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
+/* tty_mutex.c */
/* functions for preparation of BKL removal */
-static inline void tty_lock(void) __acquires(kernel_lock)
-{
-#ifdef CONFIG_LOCK_KERNEL
- /* kernel_locked is 1 for !CONFIG_LOCK_KERNEL */
- WARN_ON(kernel_locked());
-#endif
- lock_kernel();
-}
-static inline void tty_unlock(void) __releases(kernel_lock)
-{
- unlock_kernel();
-}
-#define tty_locked() (kernel_locked())
+extern void __lockfunc tty_lock(void) __acquires(tty_lock);
+extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+extern struct task_struct *__big_tty_mutex_owner;
+#define tty_locked() (current == __big_tty_mutex_owner)
/*
* wait_event_interruptible_tty -- wait for a condition with the tty lock held
--
GitLab
From e142a31da34b42458e10026b554e66127739cf23 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:10 +0200
Subject: [PATCH 684/863] tty: release BTM while sleeping in block_til_ready
Most tty drivers may block while opening a device.
Since this possibly depends on another thread
closing it first and both threads may need the BTM,
we need to release it here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/amiserial.c | 2 ++
drivers/char/ip2/ip2main.c | 4 ++++
drivers/char/serial167.c | 4 +++-
drivers/char/specialix.c | 2 ++
drivers/char/synclink.c | 2 ++
drivers/char/synclink_gt.c | 2 ++
drivers/char/synclinkmp.c | 2 ++
drivers/char/tty_port.c | 2 ++
drivers/serial/68328serial.c | 2 ++
drivers/serial/68360serial.c | 2 ++
drivers/serial/crisv10.c | 2 ++
11 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 8228e61bb54df..a11c8c9ca3d4b 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1710,7 +1710,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
printk("block_til_ready blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
+ tty_unlock();
schedule();
+ tty_lock();
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 911e1da6def22..07f3ea38b5828 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -1486,7 +1486,9 @@ ip2_open( PTTY tty, struct file *pFile )
if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) {
if ( pCh->flags & ASYNC_CLOSING ) {
+ tty_unlock();
schedule();
+ tty_lock();
}
if ( tty_hung_up_p(pFile) ) {
set_current_state( TASK_RUNNING );
@@ -1548,7 +1550,9 @@ ip2_open( PTTY tty, struct file *pFile )
rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS);
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state( TASK_RUNNING );
remove_wait_queue(&pCh->open_wait, &wait);
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 90b3ec0aabdd6..f646725bd567e 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1786,7 +1786,9 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
tty->name, info->count);
/**/
#endif
- schedule();
+ tty_unlock();
+ schedule();
+ tty_lock();
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 7be456f760c92..9f8495b4fc8f5 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -1365,7 +1365,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
retval = -ERESTARTSYS;
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 2b03d4d473505..a2a58004e188e 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -3349,7 +3349,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 5a602eb7cd2d9..fef80cfcab5c8 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -3244,7 +3244,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
}
DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index ac447c7eb572a..e56caf7d82aaa 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -3365,7 +3365,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
printk("%s(%d):%s block_til_ready() count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 35eb30402f188..33d37d230f8f4 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -294,7 +294,9 @@ int tty_port_block_til_ready(struct tty_port *port,
retval = -ERESTARTSYS;
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
finish_wait(&port->open_wait, &wait);
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 9330edb323e24..d8204f4ebbb40 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -1235,7 +1235,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
retval = -ERESTARTSYS;
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index edcf1cc089d11..0dff3bbddc8b3 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1860,7 +1860,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
printk("block_til_ready blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
+ tty_unlock();
schedule();
+ tty_lock();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8e356c5eeae0e..5696710b6f2dd 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -4066,7 +4066,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
printk("block_til_ready blocking: ttyS%d, count = %d\n",
info->line, info->count);
#endif
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
--
GitLab
From a0821df6e57c8af0053963d0d08c8d5198ea077d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 22:53:11 +0200
Subject: [PATCH 685/863] 8250: fix set_ldisc operation
The ldisc number now gets passed into ->set_ldisc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/8250.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index bc8ed4be90738..355148dc085eb 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2404,14 +2404,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
}
static void
-serial8250_set_ldisc(struct uart_port *port)
+serial8250_set_ldisc(struct uart_port *port, int new)
{
- int line = port->line;
-
- if (line >= port->state->port.tty->driver->num)
- return;
-
- if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+ if (new == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
serial8250_enable_ms(port);
} else
--
GitLab
From 11dbf203922dc70a340417c895c95fb96f6b7068 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 18 Jun 2010 14:58:07 +0200
Subject: [PATCH 686/863] tty: avoid recursive BTM in pty_close
When the console has been redirected, a hangup of the tty
will cause tty_release to be called under the big tty_mutex,
which leads to a deadlock because hangup is also called
under the BTM.
This moves the BTM deeper into the tty_hangup function so
we can close the redirected tty without holding the BTM.
In case of pty, we now need to drop the BTM before
calling tty_vhangup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/pty.c | 4 +++-
drivers/char/tty_io.c | 24 ++++++++++++------------
2 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index f2d7a76fab541..ad46eae1f9bb2 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -62,7 +62,9 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
if (tty->driver == ptm_driver)
devpts_pty_kill(tty->link);
#endif
- tty_vhangup_locked(tty->link);
+ tty_unlock();
+ tty_vhangup(tty->link);
+ tty_lock();
}
}
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index dcf7d368639ed..4c4030c12d3a9 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -471,7 +471,7 @@ void tty_wakeup(struct tty_struct *tty)
EXPORT_SYMBOL_GPL(tty_wakeup);
/**
- * do_tty_hangup - actual handler for hangup events
+ * __tty_hangup - actual handler for hangup events
* @work: tty device
*
* This can be called by the "eventd" kernel thread. That is process
@@ -492,7 +492,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
* tasklist_lock to walk task list for hangup event
* ->siglock to protect ->signal/->sighand
*/
-void tty_vhangup_locked(struct tty_struct *tty)
+void __tty_hangup(struct tty_struct *tty)
{
struct file *cons_filp = NULL;
struct file *filp, *f = NULL;
@@ -512,10 +512,12 @@ void tty_vhangup_locked(struct tty_struct *tty)
}
spin_unlock(&redirect_lock);
+ tty_lock();
+
/* inuse_filps is protected by the single tty lock,
this really needs to change if we want to flush the
workqueue with the lock held */
- check_tty_count(tty, "do_tty_hangup");
+ check_tty_count(tty, "tty_hangup");
file_list_lock();
/* This breaks for file handles being sent over AF_UNIX sockets ? */
@@ -594,6 +596,9 @@ void tty_vhangup_locked(struct tty_struct *tty)
*/
set_bit(TTY_HUPPED, &tty->flags);
tty_ldisc_enable(tty);
+
+ tty_unlock();
+
if (f)
fput(f);
}
@@ -603,9 +608,7 @@ static void do_tty_hangup(struct work_struct *work)
struct tty_struct *tty =
container_of(work, struct tty_struct, hangup_work);
- tty_lock();
- tty_vhangup_locked(tty);
- tty_unlock();
+ __tty_hangup(tty);
}
/**
@@ -643,13 +646,12 @@ void tty_vhangup(struct tty_struct *tty)
printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
#endif
- tty_lock();
- tty_vhangup_locked(tty);
- tty_unlock();
+ __tty_hangup(tty);
}
EXPORT_SYMBOL(tty_vhangup);
+
/**
* tty_vhangup_self - process vhangup for own ctty
*
@@ -727,10 +729,8 @@ void disassociate_ctty(int on_exit)
if (tty) {
tty_pgrp = get_pid(tty->pgrp);
if (on_exit) {
- tty_lock();
if (tty->driver->type != TTY_DRIVER_TYPE_PTY)
- tty_vhangup_locked(tty);
- tty_unlock();
+ tty_vhangup(tty);
}
tty_kref_put(tty);
} else if (on_exit) {
--
GitLab
From 44318feb93327e36108b2a9cf94ac9f7ccabf047 Mon Sep 17 00:00:00 2001
From: "jianwei.yang" <jianwei.yang@intel.com>
Date: Wed, 30 Jun 2010 17:57:12 +0100
Subject: [PATCH 687/863] serial: max3107: introduce a max3107 driver
This device is used by some of the Intel MID platforms. It's not similar
enough to the MAX3100 to use the same driver.
At this point the driver is specific to the platform and not generalised.
We will fix that later.
Signed-off-by: jianwei.yang <jianwei.yang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/Kconfig | 8 +
drivers/serial/Makefile | 1 +
drivers/serial/max3107.c | 1442 ++++++++++++++++++++++++++++++++++++++
drivers/serial/max3107.h | 358 ++++++++++
4 files changed, 1809 insertions(+)
create mode 100644 drivers/serial/max3107.c
create mode 100644 drivers/serial/max3107.h
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 964634e79c168..fd406273cb715 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -542,6 +542,14 @@ config SERIAL_S5PV210
help
Serial port support for Samsung's S5P Family of SoC's
+config SERIAL_MAX3107
+ tristate "MAX3107 support"
+ depends on SPI && GPIOLIB
+ select SERIAL_CORE
+ default y
+ help
+ MAX3107 chip support
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index a5edb49c7303f..4cd0c0694917b 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
+obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c
new file mode 100644
index 0000000000000..a96ddd388ffd8
--- /dev/null
+++ b/drivers/serial/max3107.c
@@ -0,0 +1,1442 @@
+/*
+ * max3107.c - spi uart protocol driver for Maxim 3107
+ * Based on max3100.c
+ * by Christian Pellegrin <chripell@evolware.org>
+ * and max3110.c
+ * by Feng Tang <feng.tang@intel.com>
+ *
+ * Copyright (C) Aavamobile 2009
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/sfi.h>
+#include <asm/mrst.h>
+#include "max3107.h"
+
+struct baud_table {
+ int baud;
+ u32 new_brg;
+};
+
+struct max3107_port {
+ /* UART port structure */
+ struct uart_port port;
+
+ /* SPI device structure */
+ struct spi_device *spi;
+
+ /* GPIO chip stucture */
+ struct gpio_chip chip;
+
+ /* Workqueue that does all the magic */
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ /* Lock for shared data */
+ spinlock_t data_lock;
+
+ /* Device configuration */
+ int ext_clk; /* 1 if external clock used */
+ int loopback; /* Current loopback mode state */
+ int baud; /* Current baud rate */
+
+ /* State flags */
+ int suspended; /* Indicates suspend mode */
+ int tx_fifo_empty; /* Flag for TX FIFO state */
+ int rx_enabled; /* Flag for receiver state */
+ int tx_enabled; /* Flag for transmitter state */
+
+ u16 irqen_reg; /* Current IRQ enable register value */
+ /* Shared data */
+ u16 mode1_reg; /* Current mode1 register value*/
+ int mode1_commit; /* Flag for setting new mode1 register value */
+ u16 lcr_reg; /* Current LCR register value */
+ int lcr_commit; /* Flag for setting new LCR register value */
+ u32 brg_cfg; /* Current Baud rate generator config */
+ int brg_commit; /* Flag for setting new baud rate generator
+ * config
+ */
+ struct baud_table *baud_tbl;
+ int handle_irq; /* Indicates that IRQ should be handled */
+
+ /* Rx buffer and str*/
+ u16 *rxbuf;
+ u8 *rxstr;
+ /* Tx buffer*/
+ u16 *txbuf;
+};
+
+/* Platform data structure */
+struct max3107_plat {
+ /* Loopback mode enable */
+ int loopback;
+ /* External clock enable */
+ int ext_clk;
+ /* HW suspend function */
+ void (*max3107_hw_suspend) (struct max3107_port *s, int suspend);
+ /* Polling mode enable */
+ int polled_mode;
+ /* Polling period if polling mode enabled */
+ int poll_time;
+};
+
+static struct baud_table brg13_ext[] = {
+ { 300, MAX3107_BRG13_B300 },
+ { 600, MAX3107_BRG13_B600 },
+ { 1200, MAX3107_BRG13_B1200 },
+ { 2400, MAX3107_BRG13_B2400 },
+ { 4800, MAX3107_BRG13_B4800 },
+ { 9600, MAX3107_BRG13_B9600 },
+ { 19200, MAX3107_BRG13_B19200 },
+ { 57600, MAX3107_BRG13_B57600 },
+ { 115200, MAX3107_BRG13_B115200 },
+ { 230400, MAX3107_BRG13_B230400 },
+ { 460800, MAX3107_BRG13_B460800 },
+ { 921600, MAX3107_BRG13_B921600 },
+ { 0, 0 }
+};
+
+static struct baud_table brg26_ext[] = {
+ { 300, MAX3107_BRG26_B300 },
+ { 600, MAX3107_BRG26_B600 },
+ { 1200, MAX3107_BRG26_B1200 },
+ { 2400, MAX3107_BRG26_B2400 },
+ { 4800, MAX3107_BRG26_B4800 },
+ { 9600, MAX3107_BRG26_B9600 },
+ { 19200, MAX3107_BRG26_B19200 },
+ { 57600, MAX3107_BRG26_B57600 },
+ { 115200, MAX3107_BRG26_B115200 },
+ { 230400, MAX3107_BRG26_B230400 },
+ { 460800, MAX3107_BRG26_B460800 },
+ { 921600, MAX3107_BRG26_B921600 },
+ { 0, 0 }
+};
+
+static struct baud_table brg13_int[] = {
+ { 300, MAX3107_BRG13_IB300 },
+ { 600, MAX3107_BRG13_IB600 },
+ { 1200, MAX3107_BRG13_IB1200 },
+ { 2400, MAX3107_BRG13_IB2400 },
+ { 4800, MAX3107_BRG13_IB4800 },
+ { 9600, MAX3107_BRG13_IB9600 },
+ { 19200, MAX3107_BRG13_IB19200 },
+ { 57600, MAX3107_BRG13_IB57600 },
+ { 115200, MAX3107_BRG13_IB115200 },
+ { 230400, MAX3107_BRG13_IB230400 },
+ { 460800, MAX3107_BRG13_IB460800 },
+ { 921600, MAX3107_BRG13_IB921600 },
+ { 0, 0 }
+};
+
+static u32 get_new_brg(int baud, struct max3107_port *s)
+{
+ int i;
+ struct baud_table *baud_tbl = s->baud_tbl;
+
+ for (i = 0; i < 13; i++) {
+ if (baud == baud_tbl[i].baud)
+ return baud_tbl[i].new_brg;
+ }
+
+ return 0;
+}
+
+/* Perform SPI transfer for write/read of device register(s) */
+static int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
+{
+ struct spi_message spi_msg;
+ struct spi_transfer spi_xfer;
+
+ /* Initialize SPI ,message */
+ spi_message_init(&spi_msg);
+
+ /* Initialize SPI transfer */
+ memset(&spi_xfer, 0, sizeof spi_xfer);
+ spi_xfer.len = len;
+ spi_xfer.tx_buf = tx;
+ spi_xfer.rx_buf = rx;
+ spi_xfer.speed_hz = MAX3107_SPI_SPEED;
+
+ /* Add SPI transfer to SPI message */
+ spi_message_add_tail(&spi_xfer, &spi_msg);
+
+#ifdef DBG_TRACE_SPI_DATA
+ {
+ int i;
+ pr_info("tx len %d:\n", spi_xfer.len);
+ for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
+ pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]);
+ pr_info("\n");
+ }
+#endif
+
+ /* Perform synchronous SPI transfer */
+ if (spi_sync(s->spi, &spi_msg)) {
+ dev_err(&s->spi->dev, "spi_sync failure\n");
+ return -EIO;
+ }
+
+#ifdef DBG_TRACE_SPI_DATA
+ if (spi_xfer.rx_buf) {
+ int i;
+ pr_info("rx len %d:\n", spi_xfer.len);
+ for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
+ pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]);
+ pr_info("\n");
+ }
+#endif
+ return 0;
+}
+
+/* Puts received data to circular buffer */
+static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data,
+ int len)
+{
+ struct uart_port *port = &s->port;
+ struct tty_struct *tty;
+
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return;
+
+ /* Insert received data */
+ tty_insert_flip_string(tty, data, len);
+ /* Update RX counter */
+ port->icount.rx += len;
+}
+
+/* Handle data receiving */
+static void max3107_handlerx(struct max3107_port *s, u16 rxlvl)
+{
+ int i;
+ int j;
+ int len; /* SPI transfer buffer length */
+ u16 *buf;
+ u8 *valid_str;
+
+ if (!s->rx_enabled)
+ /* RX is disabled */
+ return;
+
+ if (rxlvl == 0) {
+ /* RX fifo is empty */
+ return;
+ } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) {
+ dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl);
+ /* Ensure sanity of RX level */
+ rxlvl = MAX3107_RX_FIFO_SIZE;
+ }
+ if ((s->rxbuf == 0) || (s->rxstr == 0)) {
+ dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n");
+ return;
+ }
+ buf = s->rxbuf;
+ valid_str = s->rxstr;
+ while (rxlvl) {
+ pr_debug("rxlvl %d\n", rxlvl);
+ /* Clear buffer */
+ memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2));
+ len = 0;
+ if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) {
+ /* First disable RX FIFO interrupt */
+ pr_debug("Disabling RX INT\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT;
+ buf[0] |= s->irqen_reg;
+ len++;
+ }
+ /* Just increase the length by amount of words in FIFO since
+ * buffer was zeroed and SPI transfer of 0x0000 means reading
+ * from RX FIFO
+ */
+ len += rxlvl;
+ /* Append RX level query */
+ buf[len] = MAX3107_RXFIFOLVL_REG;
+ len++;
+
+ /* Perform the SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) {
+ dev_err(&s->spi->dev, "SPI transfer for RX h failed\n");
+ return;
+ }
+
+ /* Skip RX FIFO interrupt disabling word if it was added */
+ j = ((len - 1) - rxlvl);
+ /* Read received words */
+ for (i = 0; i < rxlvl; i++, j++)
+ valid_str[i] = (u8)buf[j];
+ put_data_to_circ_buf(s, valid_str, rxlvl);
+ /* Get new RX level */
+ rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK);
+ }
+
+ if (s->rx_enabled) {
+ /* RX still enabled, re-enable RX FIFO interrupt */
+ pr_debug("Enabling RX INT\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
+ buf[0] |= s->irqen_reg;
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n");
+ }
+
+ /* Push the received data to receivers */
+ if (s->port.state->port.tty)
+ tty_flip_buffer_push(s->port.state->port.tty);
+}
+
+
+/* Handle data sending */
+static void max3107_handletx(struct max3107_port *s)
+{
+ struct circ_buf *xmit = &s->port.state->xmit;
+ int i;
+ unsigned long flags;
+ int len; /* SPI transfer buffer length */
+ u16 *buf;
+
+ if (!s->tx_fifo_empty)
+ /* Don't send more data before previous data is sent */
+ return;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
+ /* No data to send or TX is stopped */
+ return;
+
+ if (!s->txbuf) {
+ dev_warn(&s->spi->dev, "Txbuf isn't ready\n");
+ return;
+ }
+ buf = s->txbuf;
+ /* Get length of data pending in circular buffer */
+ len = uart_circ_chars_pending(xmit);
+ if (len) {
+ /* Limit to size of TX FIFO */
+ if (len > MAX3107_TX_FIFO_SIZE)
+ len = MAX3107_TX_FIFO_SIZE;
+
+ pr_debug("txlen %d\n", len);
+
+ /* Update TX counter */
+ s->port.icount.tx += len;
+
+ /* TX FIFO will no longer be empty */
+ s->tx_fifo_empty = 0;
+
+ i = 0;
+ if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) {
+ /* First disable TX empty interrupt */
+ pr_debug("Disabling TE INT\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT;
+ buf[i] |= s->irqen_reg;
+ i++;
+ len++;
+ }
+ /* Add data to send */
+ spin_lock_irqsave(&s->port.lock, flags);
+ for ( ; i < len ; i++) {
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG);
+ buf[i] |= ((u16)xmit->buf[xmit->tail] &
+ MAX3107_SPI_TX_DATA_MASK);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ }
+ spin_unlock_irqrestore(&s->port.lock, flags);
+ if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) {
+ /* Enable TX empty interrupt */
+ pr_debug("Enabling TE INT\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
+ s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT;
+ buf[i] |= s->irqen_reg;
+ i++;
+ len++;
+ }
+ if (!s->tx_enabled) {
+ /* Enable TX */
+ pr_debug("Enable TX\n");
+ buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT;
+ buf[i] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ s->tx_enabled = 1;
+ i++;
+ len++;
+ }
+
+ /* Perform the SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, len*2)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer TX handling failed\n");
+ return;
+ }
+ }
+
+ /* Indicate wake up if circular buffer is getting low on data */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&s->port);
+
+}
+
+/* Handle interrupts
+ * Also reads and returns current RX FIFO level
+ */
+static u16 handle_interrupt(struct max3107_port *s)
+{
+ u16 buf[4]; /* Buffer for SPI transfers */
+ u8 irq_status;
+ u16 rx_level;
+ unsigned long flags;
+
+ /* Read IRQ status register */
+ buf[0] = MAX3107_IRQSTS_REG;
+ /* Read status IRQ status register */
+ buf[1] = MAX3107_STS_IRQSTS_REG;
+ /* Read LSR IRQ status register */
+ buf[2] = MAX3107_LSR_IRQSTS_REG;
+ /* Query RX level */
+ buf[3] = MAX3107_RXFIFOLVL_REG;
+
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for INTR handling failed\n");
+ return 0;
+ }
+
+ irq_status = (u8)buf[0];
+ pr_debug("IRQSTS %x\n", irq_status);
+ rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK);
+
+ if (irq_status & MAX3107_IRQ_LSR_BIT) {
+ /* LSR interrupt */
+ if (buf[2] & MAX3107_LSR_RXTO_BIT)
+ /* RX timeout interrupt,
+ * handled by normal RX handling
+ */
+ pr_debug("RX TO INT\n");
+ }
+
+ if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) {
+ /* Tx empty interrupt,
+ * disable TX and set tx_fifo_empty flag
+ */
+ pr_debug("TE INT, disabling TX\n");
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
+ buf[0] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer TX dis failed\n");
+ s->tx_enabled = 0;
+ s->tx_fifo_empty = 1;
+ }
+
+ if (irq_status & MAX3107_IRQ_RXFIFO_BIT)
+ /* RX FIFO interrupt,
+ * handled by normal RX handling
+ */
+ pr_debug("RFIFO INT\n");
+
+ /* Return RX level */
+ return rx_level;
+}
+
+/* Trigger work thread*/
+static void max3107_dowork(struct max3107_port *s)
+{
+ if (!work_pending(&s->work) && !freezing(current) && !s->suspended)
+ queue_work(s->workqueue, &s->work);
+ else
+ dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n");
+}
+
+/* Work thread */
+static void max3107_work(struct work_struct *w)
+{
+ struct max3107_port *s = container_of(w, struct max3107_port, work);
+ u16 rxlvl = 0;
+ int len; /* SPI transfer buffer length */
+ u16 buf[5]; /* Buffer for SPI transfers */
+ unsigned long flags;
+
+ /* Start by reading current RX FIFO level */
+ buf[0] = MAX3107_RXFIFOLVL_REG;
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer RX lev failed\n");
+ rxlvl = 0;
+ } else {
+ rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK);
+ }
+
+ do {
+ pr_debug("rxlvl %d\n", rxlvl);
+
+ /* Handle RX */
+ max3107_handlerx(s, rxlvl);
+ rxlvl = 0;
+
+ if (s->handle_irq) {
+ /* Handle pending interrupts
+ * We also get new RX FIFO level since new data may
+ * have been received while pushing received data to
+ * receivers
+ */
+ s->handle_irq = 0;
+ rxlvl = handle_interrupt(s);
+ }
+
+ /* Handle TX */
+ max3107_handletx(s);
+
+ /* Handle configuration changes */
+ len = 0;
+ spin_lock_irqsave(&s->data_lock, flags);
+ if (s->mode1_commit) {
+ pr_debug("mode1_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ buf[len++] |= s->mode1_reg;
+ s->mode1_commit = 0;
+ }
+ if (s->lcr_commit) {
+ pr_debug("lcr_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG);
+ buf[len++] |= s->lcr_reg;
+ s->lcr_commit = 0;
+ }
+ if (s->brg_commit) {
+ pr_debug("brg_commit\n");
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG);
+ buf[len++] |= ((s->brg_cfg >> 16) &
+ MAX3107_SPI_TX_DATA_MASK);
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG);
+ buf[len++] |= ((s->brg_cfg >> 8) &
+ MAX3107_SPI_TX_DATA_MASK);
+ buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG);
+ buf[len++] |= ((s->brg_cfg) & 0xff);
+ s->brg_commit = 0;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ if (len > 0) {
+ if (max3107_rw(s, (u8 *)buf, NULL, len * 2))
+ dev_err(&s->spi->dev,
+ "SPI transfer config failed\n");
+ }
+
+ /* Reloop if interrupt handling indicated data in RX FIFO */
+ } while (rxlvl);
+
+}
+
+/* Set sleep mode */
+static void max3107_set_sleep(struct max3107_port *s, int mode)
+{
+ u16 buf[1]; /* Buffer for SPI transfer */
+ unsigned long flags;
+ pr_debug("enter, mode %d\n", mode);
+
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
+ spin_lock_irqsave(&s->data_lock, flags);
+ switch (mode) {
+ case MAX3107_DISABLE_FORCED_SLEEP:
+ s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT;
+ break;
+ case MAX3107_ENABLE_FORCED_SLEEP:
+ s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT;
+ break;
+ case MAX3107_DISABLE_AUTOSLEEP:
+ s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT;
+ break;
+ case MAX3107_ENABLE_AUTOSLEEP:
+ s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT;
+ break;
+ default:
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ dev_warn(&s->spi->dev, "invalid sleep mode\n");
+ return;
+ }
+ buf[0] |= s->mode1_reg;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n");
+
+ if (mode == MAX3107_DISABLE_AUTOSLEEP ||
+ mode == MAX3107_DISABLE_FORCED_SLEEP)
+ msleep(MAX3107_WAKEUP_DELAY);
+}
+
+/* Perform full register initialization */
+static void max3107_register_init(struct max3107_port *s)
+{
+ u16 buf[11]; /* Buffer for SPI transfers */
+
+ /* 1. Configure baud rate, 9600 as default */
+ s->baud = 9600;
+ /* the below is default*/
+ if (s->ext_clk) {
+ s->brg_cfg = MAX3107_BRG26_B9600;
+ s->baud_tbl = (struct baud_table *)brg26_ext;
+ } else {
+ s->brg_cfg = MAX3107_BRG13_IB9600;
+ s->baud_tbl = (struct baud_table *)brg13_int;
+ }
+#if 0
+ /*override for AAVA SC specific*/
+ if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
+ if (get_koski_build_id() <= KOSKI_EV2)
+ if (s->ext_clk) {
+ s->brg_cfg = MAX3107_BRG13_B9600;
+ s->baud_tbl = (struct baud_table *)brg13_ext;
+ }
+ }
+#endif
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG)
+ | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK);
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG)
+ | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK);
+ buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG)
+ | ((s->brg_cfg) & 0xff);
+
+ /* 2. Configure LCR register, 8N1 mode by default */
+ s->lcr_reg = MAX3107_LCR_WORD_LEN_8;
+ buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG)
+ | s->lcr_reg;
+
+ /* 3. Configure MODE 1 register */
+ s->mode1_reg = 0;
+ /* Enable IRQ pin */
+ s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT;
+ /* Disable TX */
+ s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
+ s->tx_enabled = 0;
+ /* RX is enabled */
+ s->rx_enabled = 1;
+ buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG)
+ | s->mode1_reg;
+
+ /* 4. Configure MODE 2 register */
+ buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
+ if (s->loopback) {
+ /* Enable loopback */
+ buf[5] |= MAX3107_MODE2_LOOPBACK_BIT;
+ }
+ /* Reset FIFOs */
+ buf[5] |= MAX3107_MODE2_FIFORST_BIT;
+ s->tx_fifo_empty = 1;
+
+ /* 5. Configure FIFO trigger level register */
+ buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG);
+ /* RX FIFO trigger for 16 words, TX FIFO trigger not used */
+ buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0));
+
+ /* 6. Configure flow control levels */
+ buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG);
+ /* Flow control halt level 96, resume level 48 */
+ buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96));
+
+ /* 7. Configure flow control */
+ buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG);
+ /* Enable auto CTS and auto RTS flow control */
+ buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT);
+
+ /* 8. Configure RX timeout register */
+ buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG);
+ /* Timeout after 48 character intervals */
+ buf[9] |= 0x0030;
+
+ /* 9. Configure LSR interrupt enable register */
+ buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG);
+ /* Enable RX timeout interrupt */
+ buf[10] |= MAX3107_LSR_RXTO_BIT;
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 22))
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+
+ /* 10. Clear IRQ status register by reading it */
+ buf[0] = MAX3107_IRQSTS_REG;
+
+ /* 11. Configure interrupt enable register */
+ /* Enable LSR interrupt */
+ s->irqen_reg = MAX3107_IRQ_LSR_BIT;
+ /* Enable RX FIFO interrupt */
+ s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG)
+ | s->irqen_reg;
+
+ /* 12. Clear FIFO reset that was set in step 6 */
+ buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
+ if (s->loopback) {
+ /* Keep loopback enabled */
+ buf[2] |= MAX3107_MODE2_LOOPBACK_BIT;
+ }
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6))
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+
+}
+
+/* IRQ handler */
+static irqreturn_t max3107_irq(int irqno, void *dev_id)
+{
+ struct max3107_port *s = dev_id;
+
+ if (irqno != s->spi->irq) {
+ /* Unexpected IRQ */
+ return IRQ_NONE;
+ }
+
+ /* Indicate irq */
+ s->handle_irq = 1;
+
+ /* Trigger work thread */
+ max3107_dowork(s);
+
+ return IRQ_HANDLED;
+}
+
+/* HW suspension function
+ *
+ * Currently autosleep is used to decrease current consumption, alternative
+ * approach would be to set the chip to reset mode if UART is not being
+ * used but that would mess the GPIOs
+ *
+ */
+static void max3107_hw_susp(struct max3107_port *s, int suspend)
+{
+ pr_debug("enter, suspend %d\n", suspend);
+
+ if (suspend) {
+ /* Suspend requested,
+ * enable autosleep to decrease current consumption
+ */
+ s->suspended = 1;
+ max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP);
+ } else {
+ /* Resume requested,
+ * disable autosleep
+ */
+ s->suspended = 0;
+ max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP);
+ }
+}
+
+/* Modem status IRQ enabling */
+static void max3107_enable_ms(struct uart_port *port)
+{
+ /* Modem status not supported */
+}
+
+/* Data send function */
+static void max3107_start_tx(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ /* Trigger work thread for sending data */
+ max3107_dowork(s);
+}
+
+/* Function for checking that there is no pending transfers */
+static unsigned int max3107_tx_empty(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ pr_debug("returning %d\n",
+ (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit)));
+ return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit);
+}
+
+/* Function for stopping RX */
+static void max3107_stop_rx(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ unsigned long flags;
+
+ /* Set RX disabled in MODE 1 register */
+ spin_lock_irqsave(&s->data_lock, flags);
+ s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT;
+ s->mode1_commit = 1;
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ /* Set RX disabled */
+ s->rx_enabled = 0;
+ /* Trigger work thread for doing the actual configuration change */
+ max3107_dowork(s);
+}
+
+/* Function for returning control pin states */
+static unsigned int max3107_get_mctrl(struct uart_port *port)
+{
+ /* DCD and DSR are not wired and CTS/RTS is handled automatically
+ * so just indicate DSR and CAR asserted
+ */
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+/* Function for setting control pin states */
+static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
+ * so do nothing
+ */
+}
+
+/* Function for configuring UART parameters */
+static void max3107_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ struct tty_struct *tty;
+ int baud;
+ u16 new_lcr = 0;
+ u32 new_brg = 0;
+ unsigned long flags;
+
+ if (!port->state)
+ return;
+
+ tty = port->state->port.tty;
+ if (!tty)
+ return;
+
+ /* Get new LCR register values */
+ /* Word size */
+ if ((termios->c_cflag & CSIZE) == CS7)
+ new_lcr |= MAX3107_LCR_WORD_LEN_7;
+ else
+ new_lcr |= MAX3107_LCR_WORD_LEN_8;
+
+ /* Parity */
+ if (termios->c_cflag & PARENB) {
+ new_lcr |= MAX3107_LCR_PARITY_BIT;
+ if (!(termios->c_cflag & PARODD))
+ new_lcr |= MAX3107_LCR_EVENPARITY_BIT;
+ }
+
+ /* Stop bits */
+ if (termios->c_cflag & CSTOPB) {
+ /* 2 stop bits */
+ new_lcr |= MAX3107_LCR_STOPLEN_BIT;
+ }
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+
+ /* Set status ignore mask */
+ s->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ s->port.ignore_status_mask |= MAX3107_ALL_ERRORS;
+
+ /* Set low latency to immediately handle pushed data */
+ s->port.state->port.tty->low_latency = 1;
+
+ /* Get new baud rate generator configuration */
+ baud = tty_get_baud_rate(tty);
+
+ spin_lock_irqsave(&s->data_lock, flags);
+ new_brg = get_new_brg(baud, s);
+ /* if can't find the corrent config, use previous */
+ if (!new_brg) {
+ baud = s->baud;
+ new_brg = s->brg_cfg;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ s->baud = baud;
+
+ /* Update timeout according to new baud rate */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_lock_irqsave(&s->data_lock, flags);
+ if (s->lcr_reg != new_lcr) {
+ s->lcr_reg = new_lcr;
+ s->lcr_commit = 1;
+ }
+ if (s->brg_cfg != new_brg) {
+ s->brg_cfg = new_brg;
+ s->brg_commit = 1;
+ }
+ spin_unlock_irqrestore(&s->data_lock, flags);
+
+ /* Trigger work thread for doing the actual configuration change */
+ max3107_dowork(s);
+}
+
+/* Port shutdown function */
+static void max3107_shutdown(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ if (s->suspended) {
+ /* Resume HW */
+ max3107_hw_susp(s, 0);
+ }
+
+ /* Free the interrupt */
+ free_irq(s->spi->irq, s);
+
+ if (s->workqueue) {
+ /* Flush and destroy work queue */
+ flush_workqueue(s->workqueue);
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ }
+
+ /* Suspend HW */
+ max3107_hw_susp(s, 1);
+}
+
+/* Port startup function */
+static int max3107_startup(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ /* Initialize work queue */
+ s->workqueue = create_freezeable_workqueue("max3107");
+ if (!s->workqueue) {
+ dev_err(&s->spi->dev, "Workqueue creation failed\n");
+ return -EBUSY;
+ }
+ INIT_WORK(&s->work, max3107_work);
+
+ /* Setup IRQ */
+ if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING,
+ "max3107", s)) {
+ dev_err(&s->spi->dev, "IRQ reguest failed\n");
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ return -EBUSY;
+ }
+
+ /* Resume HW */
+ max3107_hw_susp(s, 0);
+
+ /* Init registers */
+ max3107_register_init(s);
+
+ return 0;
+}
+
+/* Port type function */
+static const char *max3107_type(struct uart_port *port)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+ return s->spi->modalias;
+}
+
+/* Port release function */
+static void max3107_release_port(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+/* Port request function */
+static int max3107_request_port(struct uart_port *port)
+{
+ /* Do nothing */
+ return 0;
+}
+
+/* Port config function */
+static void max3107_config_port(struct uart_port *port, int flags)
+{
+ struct max3107_port *s = container_of(port, struct max3107_port, port);
+
+ /* Use PORT_MAX3100 since we are at least int the same series */
+ s->port.type = PORT_MAX3100;
+}
+
+/* Port verify function */
+static int max3107_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100)
+ return 0;
+
+ return -EINVAL;
+}
+
+/* Port stop TX function */
+static void max3107_stop_tx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+/* Port break control function */
+static void max3107_break_ctl(struct uart_port *port, int break_state)
+{
+ /* We don't support break control, do nothing */
+}
+
+/* GPIO direction to input function */
+static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[1]; /* Buffer for SPI transfer */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO configuration register */
+ buf[0] = MAX3107_GPIOCFG_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Set GPIO to input */
+ buf[0] &= ~(0x0001 << offset);
+
+ /* Write new GPIO configuration register value */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* GPIO direction to output function */
+static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[2]; /* Buffer for SPI transfers */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO configuration and data registers */
+ buf[0] = MAX3107_GPIOCFG_REG;
+ buf[1] = MAX3107_GPIODATA_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+ dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+ buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Set GPIO to output */
+ buf[0] |= (0x0001 << offset);
+ /* Set value */
+ if (value)
+ buf[1] |= (0x0001 << offset);
+ else
+ buf[1] &= ~(0x0001 << offset);
+
+ /* Write new GPIO configuration and data register values */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+ buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for GPIO conf data w failed\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* GPIO value query function */
+static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[1]; /* Buffer for SPI transfer */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO data register */
+ buf[0] = MAX3107_GPIODATA_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Return value */
+ return buf[0] & (0x0001 << offset);
+}
+
+/* GPIO value set function */
+static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[2]; /* Buffer for SPI transfers */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return;
+ }
+
+ /* Read current GPIO configuration registers*/
+ buf[0] = MAX3107_GPIODATA_REG;
+ buf[1] = MAX3107_GPIOCFG_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for GPIO data and config read failed\n");
+ return;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+ buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+ if (!(buf[1] & (0x0001 << offset))) {
+ /* Configured as input, can't set value */
+ dev_warn(&s->spi->dev,
+ "Trying to set value for input GPIO\n");
+ return;
+ }
+
+ /* Set value */
+ if (value)
+ buf[0] |= (0x0001 << offset);
+ else
+ buf[0] &= ~(0x0001 << offset);
+
+ /* Write new GPIO data register value */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
+}
+
+/* Platform data */
+static struct max3107_plat max3107_plat_data = {
+ .loopback = 0,
+ .ext_clk = 1,
+ .max3107_hw_suspend = &max3107_hw_susp,
+ .polled_mode = 0,
+ .poll_time = 0,
+};
+
+/* Port functions */
+static struct uart_ops max3107_ops = {
+ .tx_empty = max3107_tx_empty,
+ .set_mctrl = max3107_set_mctrl,
+ .get_mctrl = max3107_get_mctrl,
+ .stop_tx = max3107_stop_tx,
+ .start_tx = max3107_start_tx,
+ .stop_rx = max3107_stop_rx,
+ .enable_ms = max3107_enable_ms,
+ .break_ctl = max3107_break_ctl,
+ .startup = max3107_startup,
+ .shutdown = max3107_shutdown,
+ .set_termios = max3107_set_termios,
+ .type = max3107_type,
+ .release_port = max3107_release_port,
+ .request_port = max3107_request_port,
+ .config_port = max3107_config_port,
+ .verify_port = max3107_verify_port,
+};
+
+/* UART driver data */
+static struct uart_driver max3107_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyMAX",
+ .dev_name = "ttyMAX",
+ .nr = 1,
+};
+
+/* GPIO chip data */
+static struct gpio_chip max3107_gpio_chip = {
+ .owner = THIS_MODULE,
+ .direction_input = max3107_gpio_direction_in,
+ .direction_output = max3107_gpio_direction_out,
+ .get = max3107_gpio_get,
+ .set = max3107_gpio_set,
+ .can_sleep = 1,
+ .base = MAX3107_GPIO_BASE,
+ .ngpio = MAX3107_GPIO_COUNT,
+};
+/* Device probe function */
+static int __devinit max3107_probe(struct spi_device *spi)
+{
+ struct max3107_port *s;
+ struct max3107_plat *pdata = &max3107_plat_data;
+ u16 buf[2]; /* Buffer for SPI transfers */
+ int retval;
+
+ pr_info("enter max3107 probe\n");
+
+ /* Reset the chip */
+ if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
+ pr_err("Requesting RESET GPIO failed\n");
+ return -EIO;
+ }
+ if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
+ pr_err("Setting RESET GPIO to 0 failed\n");
+ gpio_free(MAX3107_RESET_GPIO);
+ return -EIO;
+ }
+ msleep(MAX3107_RESET_DELAY);
+ if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
+ pr_err("Setting RESET GPIO to 1 failed\n");
+ gpio_free(MAX3107_RESET_GPIO);
+ return -EIO;
+ }
+ gpio_free(MAX3107_RESET_GPIO);
+ msleep(MAX3107_WAKEUP_DELAY);
+
+ /* Allocate port structure */
+ s = kzalloc(sizeof(*s), GFP_KERNEL);
+ if (!s) {
+ pr_err("Allocating port structure failed\n");
+ return -ENOMEM;
+ }
+ /* SPI Rx buffer
+ * +2 for RX FIFO interrupt
+ * disabling and RX level query
+ */
+ s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
+ if (!s->rxbuf) {
+ pr_err("Allocating RX buffer failed\n");
+ return -ENOMEM;
+ }
+ s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
+ if (!s->rxstr) {
+ pr_err("Allocating RX buffer failed\n");
+ return -ENOMEM;
+ }
+ /* SPI Tx buffer
+ * SPI transfer buffer
+ * +3 for TX FIFO empty
+ * interrupt disabling and
+ * enabling and TX enabling
+ */
+ s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
+ if (!s->txbuf) {
+ pr_err("Allocating TX buffer failed\n");
+ return -ENOMEM;
+ }
+ /* Initialize shared data lock */
+ spin_lock_init(&s->data_lock);
+
+ /* SPI intializations */
+ dev_set_drvdata(&spi->dev, s);
+ spi->mode = SPI_MODE_0;
+ spi->dev.platform_data = pdata;
+ spi->bits_per_word = 16;
+ s->ext_clk = pdata->ext_clk;
+ s->loopback = pdata->loopback;
+ spi_setup(spi);
+ s->spi = spi;
+
+ /* Check REV ID to ensure we are talking to what we expect */
+ buf[0] = MAX3107_REVID_REG;
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
+ return -EIO;
+ }
+ if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
+ (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
+ dev_err(&s->spi->dev, "REVID %x does not match\n",
+ (buf[0] & MAX3107_SPI_RX_DATA_MASK));
+ return -ENODEV;
+ }
+
+ /* Disable all interrupts */
+ buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000);
+ buf[0] |= 0x0000;
+
+ /* Configure clock source */
+ buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG);
+ if (s->ext_clk) {
+ /* External clock */
+ buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT;
+ }
+
+ /* PLL bypass ON */
+ buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT;
+
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
+ dev_err(&s->spi->dev, "SPI transfer for init failed\n");
+ return -EIO;
+ }
+
+ /* Register UART driver */
+ retval = uart_register_driver(&max3107_uart_driver);
+ if (retval) {
+ dev_err(&s->spi->dev, "Registering UART driver failed\n");
+ return retval;
+ }
+
+ /* Initialize UART port data */
+ s->port.fifosize = 128;
+ s->port.ops = &max3107_ops;
+ s->port.line = 0;
+ s->port.dev = &spi->dev;
+ s->port.uartclk = 9600;
+ s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ s->port.irq = s->spi->irq;
+ /* Use PORT_MAX3100 since we are at least in the same series */
+ s->port.type = PORT_MAX3100;
+
+ /* Add UART port */
+ retval = uart_add_one_port(&max3107_uart_driver, &s->port);
+ if (retval < 0) {
+ dev_err(&s->spi->dev, "Adding UART port failed\n");
+ return retval;
+ }
+
+ /* Initialize GPIO chip data */
+ s->chip = max3107_gpio_chip;
+ s->chip.label = spi->modalias;
+ s->chip.dev = &spi->dev;
+
+ /* Add GPIO chip */
+ retval = gpiochip_add(&s->chip);
+ if (retval) {
+ dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
+ return retval;
+ }
+
+ /* Temporary fix for EV2 boot problems, set modem reset to 0 */
+ max3107_gpio_direction_out(&s->chip, 3, 0);
+
+ /* Go to suspend mode */
+ max3107_hw_susp(s, 1);
+
+ return 0;
+}
+
+/* Driver remove function */
+static int __devexit max3107_remove(struct spi_device *spi)
+{
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_info("enter max3107 remove\n");
+
+ /* Remove GPIO chip */
+ if (gpiochip_remove(&s->chip))
+ dev_warn(&s->spi->dev, "Removing GPIO chip failed\n");
+
+ /* Remove port */
+ if (uart_remove_one_port(&max3107_uart_driver, &s->port))
+ dev_warn(&s->spi->dev, "Removing UART port failed\n");
+
+ /* Unregister UART driver */
+ uart_unregister_driver(&max3107_uart_driver);
+
+ /* Free TxRx buffer */
+ kfree(s->rxbuf);
+ kfree(s->rxstr);
+ kfree(s->txbuf);
+
+ /* Free port structure */
+ kfree(s);
+
+ return 0;
+}
+
+/* Driver suspend function */
+static int max3107_suspend(struct spi_device *spi, pm_message_t state)
+{
+#ifdef CONFIG_PM
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_debug("enter suspend\n");
+
+ /* Suspend UART port */
+ uart_suspend_port(&max3107_uart_driver, &s->port);
+
+ /* Go to suspend mode */
+ max3107_hw_susp(s, 1);
+#endif /* CONFIG_PM */
+ return 0;
+}
+
+/* Driver resume function */
+static int max3107_resume(struct spi_device *spi)
+{
+#ifdef CONFIG_PM
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ pr_debug("enter resume\n");
+
+ /* Resume from suspend */
+ max3107_hw_susp(s, 0);
+
+ /* Resume UART port */
+ uart_resume_port(&max3107_uart_driver, &s->port);
+#endif /* CONFIG_PM */
+ return 0;
+}
+
+/* Spi driver data */
+static struct spi_driver max3107_driver = {
+ .driver = {
+ .name = "max3107",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = max3107_probe,
+ .remove = __devexit_p(max3107_remove),
+ .suspend = max3107_suspend,
+ .resume = max3107_resume,
+};
+
+/* Driver init function */
+static int __init max3107_init(void)
+{
+ pr_info("enter max3107 init\n");
+ return spi_register_driver(&max3107_driver);
+}
+
+/* Driver exit function */
+static void __exit max3107_exit(void)
+{
+ pr_info("enter max3107 exit\n");
+ spi_unregister_driver(&max3107_driver);
+}
+
+module_init(max3107_init);
+module_exit(max3107_exit);
+
+MODULE_DESCRIPTION("MAX3107 driver");
+MODULE_AUTHOR("Aavamobile");
+MODULE_ALIAS("max3107-spi-uart");
+MODULE_LICENSE("GPLv2");
diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h
new file mode 100644
index 0000000000000..a5625d1f263d0
--- /dev/null
+++ b/drivers/serial/max3107.h
@@ -0,0 +1,358 @@
+/*
+ * max3107.h - spi uart protocol driver header for Maxim 3107
+ *
+ * Copyright (C) Aavamobile 2009
+ * Based on serial_max3100.h by Christian Pellegrin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_SERIAL_MAX3107_H
+#define _LINUX_SERIAL_MAX3107_H
+
+/* Serial error status definitions */
+#define MAX3107_PARITY_ERROR 1
+#define MAX3107_FRAME_ERROR 2
+#define MAX3107_OVERRUN_ERROR 4
+#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \
+ MAX3107_FRAME_ERROR | \
+ MAX3107_OVERRUN_ERROR)
+
+/* GPIO definitions */
+#define MAX3107_GPIO_BASE 88
+#define MAX3107_GPIO_COUNT 4
+
+
+/* GPIO connected to chip's reset pin */
+#define MAX3107_RESET_GPIO 87
+
+
+/* Chip reset delay */
+#define MAX3107_RESET_DELAY 10
+
+/* Chip wakeup delay */
+#define MAX3107_WAKEUP_DELAY 50
+
+
+/* Sleep mode definitions */
+#define MAX3107_DISABLE_FORCED_SLEEP 0
+#define MAX3107_ENABLE_FORCED_SLEEP 1
+#define MAX3107_DISABLE_AUTOSLEEP 2
+#define MAX3107_ENABLE_AUTOSLEEP 3
+
+
+/* Definitions for register access with SPI transfers
+ *
+ * SPI transfer format:
+ *
+ * Master to slave bits xzzzzzzzyyyyyyyy
+ * Slave to master bits aaaaaaaabbbbbbbb
+ *
+ * where:
+ * x = 0 for reads, 1 for writes
+ * z = register address
+ * y = new register value if write, 0 if read
+ * a = unspecified
+ * b = register value if read, unspecified if write
+ */
+
+/* SPI speed */
+#define MAX3107_SPI_SPEED (3125000 * 2)
+
+/* Write bit */
+#define MAX3107_WRITE_BIT (1 << 15)
+
+/* SPI TX data mask */
+#define MAX3107_SPI_RX_DATA_MASK (0x00ff)
+
+/* SPI RX data mask */
+#define MAX3107_SPI_TX_DATA_MASK (0x00ff)
+
+/* Register access masks */
+#define MAX3107_RHR_REG (0x0000) /* RX FIFO */
+#define MAX3107_THR_REG (0x0000) /* TX FIFO */
+#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */
+#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */
+#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */
+#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */
+#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */
+#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */
+#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */
+#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */
+#define MAX3107_MODE1_REG (0x0900) /* MODE1 */
+#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */
+#define MAX3107_LCR_REG (0x0b00) /* LCR */
+#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */
+#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */
+#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */
+#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */
+#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */
+#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */
+#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */
+#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */
+#define MAX3107_XON1_REG (0x1400) /* XON1 character */
+#define MAX3107_XON2_REG (0x1500) /* XON2 character */
+#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */
+#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */
+#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */
+#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */
+#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */
+#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */
+#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */
+#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */
+#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */
+#define MAX3107_REVID_REG (0x1f00) /* Revision identification */
+
+/* IRQ register bits */
+#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
+#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */
+#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */
+#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */
+#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */
+#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */
+#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */
+#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */
+
+/* LSR register bits */
+#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */
+#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */
+#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */
+#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */
+#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */
+#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */
+#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */
+
+/* Special character register bits */
+#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */
+#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */
+#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */
+#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */
+#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */
+#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */
+#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Status register bits */
+#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */
+#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */
+#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */
+#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */
+#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */
+#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */
+#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */
+#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* MODE1 register bits */
+#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */
+#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */
+#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */
+#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */
+#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */
+#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */
+#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */
+#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */
+
+/* MODE2 register bits */
+#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */
+#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */
+#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */
+#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */
+#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */
+#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */
+#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */
+#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */
+
+/* LCR register bits */
+#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */
+#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1
+ *
+ * Word length bits table:
+ * 00 -> 5 bit words
+ * 01 -> 6 bit words
+ * 10 -> 7 bit words
+ * 11 -> 8 bit words
+ */
+#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit
+ *
+ * STOP length bit table:
+ * 0 -> 1 stop bit
+ * 1 -> 1-1.5 stop bits if
+ * word length is 5,
+ * 2 stop bits otherwise
+ */
+#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */
+#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */
+#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */
+#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */
+#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */
+#define MAX3107_LCR_WORD_LEN_5 (0x0000)
+#define MAX3107_LCR_WORD_LEN_6 (0x0001)
+#define MAX3107_LCR_WORD_LEN_7 (0x0002)
+#define MAX3107_LCR_WORD_LEN_8 (0x0003)
+
+
+/* IRDA register bits */
+#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */
+#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
+#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */
+#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */
+#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */
+#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */
+#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Flow control trigger level register masks */
+#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
+#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */
+#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f)
+#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4)
+
+/* FIFO interrupt trigger level register masks */
+#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */
+#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */
+#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f)
+#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4)
+
+/* Flow control register bits */
+#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */
+#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */
+#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs
+ * are used in conjunction with
+ * XOFF2 for definition of
+ * special character */
+#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */
+#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */
+#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1
+ *
+ * SWFLOW bits 1 & 0 table:
+ * 00 -> no transmitter flow
+ * control
+ * 01 -> receiver compares
+ * XON2 and XOFF2
+ * and controls
+ * transmitter
+ * 10 -> receiver compares
+ * XON1 and XOFF1
+ * and controls
+ * transmitter
+ * 11 -> receiver compares
+ * XON1, XON2, XOFF1 and
+ * XOFF2 and controls
+ * transmitter
+ */
+#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */
+#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3
+ *
+ * SWFLOW bits 3 & 2 table:
+ * 00 -> no received flow
+ * control
+ * 01 -> transmitter generates
+ * XON2 and XOFF2
+ * 10 -> transmitter generates
+ * XON1 and XOFF1
+ * 11 -> transmitter generates
+ * XON1, XON2, XOFF1 and
+ * XOFF2
+ */
+
+/* GPIO configuration register bits */
+#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */
+#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */
+#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */
+#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */
+#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */
+#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */
+#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */
+#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */
+
+/* GPIO DATA register bits */
+#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */
+#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */
+#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */
+#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */
+#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */
+#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */
+#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */
+#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */
+
+/* PLL configuration register masks */
+#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */
+#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */
+
+/* Baud rate generator configuration register masks and bits */
+#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of
+ * Baud rate generator divisor
+ */
+#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */
+#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */
+#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */
+
+/* Clock source register bits */
+#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */
+#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */
+#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */
+#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */
+#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */
+#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */
+#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */
+#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */
+
+
+/* HW definitions */
+#define MAX3107_RX_FIFO_SIZE 128
+#define MAX3107_TX_FIFO_SIZE 128
+#define MAX3107_REVID1 0x00a0
+#define MAX3107_REVID2 0x00a1
+
+
+/* Baud rate generator configuration values for external clock 13MHz */
+#define MAX3107_BRG13_B300 (0x0A9400 | 0x05)
+#define MAX3107_BRG13_B600 (0x054A00 | 0x03)
+#define MAX3107_BRG13_B1200 (0x02A500 | 0x01)
+#define MAX3107_BRG13_B2400 (0x015200 | 0x09)
+#define MAX3107_BRG13_B4800 (0x00A900 | 0x04)
+#define MAX3107_BRG13_B9600 (0x005400 | 0x0A)
+#define MAX3107_BRG13_B19200 (0x002A00 | 0x05)
+#define MAX3107_BRG13_B38400 (0x001500 | 0x03)
+#define MAX3107_BRG13_B57600 (0x000E00 | 0x02)
+#define MAX3107_BRG13_B115200 (0x000700 | 0x01)
+#define MAX3107_BRG13_B230400 (0x000300 | 0x08)
+#define MAX3107_BRG13_B460800 (0x000100 | 0x0c)
+#define MAX3107_BRG13_B921600 (0x000100 | 0x1c)
+
+/* Baud rate generator configuration values for external clock 26MHz */
+#define MAX3107_BRG26_B300 (0x152800 | 0x0A)
+#define MAX3107_BRG26_B600 (0x0A9400 | 0x05)
+#define MAX3107_BRG26_B1200 (0x054A00 | 0x03)
+#define MAX3107_BRG26_B2400 (0x02A500 | 0x01)
+#define MAX3107_BRG26_B4800 (0x015200 | 0x09)
+#define MAX3107_BRG26_B9600 (0x00A900 | 0x04)
+#define MAX3107_BRG26_B19200 (0x005400 | 0x0A)
+#define MAX3107_BRG26_B38400 (0x002A00 | 0x05)
+#define MAX3107_BRG26_B57600 (0x001C00 | 0x03)
+#define MAX3107_BRG26_B115200 (0x000E00 | 0x02)
+#define MAX3107_BRG26_B230400 (0x000700 | 0x01)
+#define MAX3107_BRG26_B460800 (0x000300 | 0x08)
+#define MAX3107_BRG26_B921600 (0x000100 | 0x0C)
+
+/* Baud rate generator configuration values for internal clock */
+#define MAX3107_BRG13_IB300 (0x008000 | 0x00)
+#define MAX3107_BRG13_IB600 (0x004000 | 0x00)
+#define MAX3107_BRG13_IB1200 (0x002000 | 0x00)
+#define MAX3107_BRG13_IB2400 (0x001000 | 0x00)
+#define MAX3107_BRG13_IB4800 (0x000800 | 0x00)
+#define MAX3107_BRG13_IB9600 (0x000400 | 0x00)
+#define MAX3107_BRG13_IB19200 (0x000200 | 0x00)
+#define MAX3107_BRG13_IB38400 (0x000100 | 0x00)
+#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B)
+#define MAX3107_BRG13_IB115200 (0x000000 | 0x05)
+#define MAX3107_BRG13_IB230400 (0x000000 | 0x03)
+#define MAX3107_BRG13_IB460800 (0x000000 | 0x00)
+#define MAX3107_BRG13_IB921600 (0x000000 | 0x00)
+
+#endif /* _LINUX_SERIAL_MAX3107_H */
--
GitLab
From 61fd15262bb9c88a05fd89af22add9317dc1b1f4 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Wed, 30 Jun 2010 17:58:38 +0100
Subject: [PATCH 688/863] serial: max3107: Abstract out the platform specific
bits
At the moment there is only one platform type supported and there is is
hard wired, but with these changes the infrastructure is now there for
anyone else to provide methods for their hardware.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/Kconfig | 21 +-
drivers/serial/Makefile | 1 +
drivers/serial/max3107-aava.c | 344 ++++++++++++++++++++++++++++
drivers/serial/max3107.c | 413 +++++++---------------------------
drivers/serial/max3107.h | 85 ++++++-
include/linux/serial_core.h | 4 +
6 files changed, 531 insertions(+), 337 deletions(-)
create mode 100644 drivers/serial/max3107-aava.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index fd406273cb715..c34c217878b37 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -542,20 +542,29 @@ config SERIAL_S5PV210
help
Serial port support for Samsung's S5P Family of SoC's
+
+config SERIAL_MAX3100
+ tristate "MAX3100 support"
+ depends on SPI
+ select SERIAL_CORE
+ help
+ MAX3100 chip support
+
config SERIAL_MAX3107
tristate "MAX3107 support"
- depends on SPI && GPIOLIB
+ depends on SPI
select SERIAL_CORE
- default y
help
MAX3107 chip support
-config SERIAL_MAX3100
- tristate "MAX3100 support"
- depends on SPI
+config SERIAL_MAX3107_AAVA
+ tristate "MAX3107 AAVA platform support"
+ depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
select SERIAL_CORE
help
- MAX3100 chip support
+ Support for the MAX3107 chip configuration found on the AAVA
+ platform. Includes the extra initialisation and GPIO support
+ neded for this device.
config SERIAL_DZ
bool "DECstation DZ serial driver"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 4cd0c0694917b..424067ac33478 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
+obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/serial/max3107-aava.c b/drivers/serial/max3107-aava.c
new file mode 100644
index 0000000000000..a1fe304f2f520
--- /dev/null
+++ b/drivers/serial/max3107-aava.c
@@ -0,0 +1,344 @@
+/*
+ * max3107.c - spi uart protocol driver for Maxim 3107
+ * Based on max3100.c
+ * by Christian Pellegrin <chripell@evolware.org>
+ * and max3110.c
+ * by Feng Tang <feng.tang@intel.com>
+ *
+ * Copyright (C) Aavamobile 2009
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/sfi.h>
+#include <asm/mrst.h>
+#include "max3107.h"
+
+/* GPIO direction to input function */
+static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[1]; /* Buffer for SPI transfer */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO configuration register */
+ buf[0] = MAX3107_GPIOCFG_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Set GPIO to input */
+ buf[0] &= ~(0x0001 << offset);
+
+ /* Write new GPIO configuration register value */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* GPIO direction to output function */
+static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[2]; /* Buffer for SPI transfers */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO configuration and data registers */
+ buf[0] = MAX3107_GPIOCFG_REG;
+ buf[1] = MAX3107_GPIODATA_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+ dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+ buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Set GPIO to output */
+ buf[0] |= (0x0001 << offset);
+ /* Set value */
+ if (value)
+ buf[1] |= (0x0001 << offset);
+ else
+ buf[1] &= ~(0x0001 << offset);
+
+ /* Write new GPIO configuration and data register values */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+ buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for GPIO conf data w failed\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* GPIO value query function */
+static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[1]; /* Buffer for SPI transfer */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return -EINVAL;
+ }
+
+ /* Read current GPIO data register */
+ buf[0] = MAX3107_GPIODATA_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+ dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
+ return -EIO;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+ /* Return value */
+ return buf[0] & (0x0001 << offset);
+}
+
+/* GPIO value set function */
+static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+ u16 buf[2]; /* Buffer for SPI transfers */
+
+ if (offset >= MAX3107_GPIO_COUNT) {
+ dev_err(&s->spi->dev, "Invalid GPIO\n");
+ return;
+ }
+
+ /* Read current GPIO configuration registers*/
+ buf[0] = MAX3107_GPIODATA_REG;
+ buf[1] = MAX3107_GPIOCFG_REG;
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+ dev_err(&s->spi->dev,
+ "SPI transfer for GPIO data and config read failed\n");
+ return;
+ }
+ buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+ buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+ if (!(buf[1] & (0x0001 << offset))) {
+ /* Configured as input, can't set value */
+ dev_warn(&s->spi->dev,
+ "Trying to set value for input GPIO\n");
+ return;
+ }
+
+ /* Set value */
+ if (value)
+ buf[0] |= (0x0001 << offset);
+ else
+ buf[0] &= ~(0x0001 << offset);
+
+ /* Write new GPIO data register value */
+ buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+ /* Perform SPI transfer */
+ if (max3107_rw(s, (u8 *)buf, NULL, 2))
+ dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
+}
+
+/* GPIO chip data */
+static struct gpio_chip max3107_gpio_chip = {
+ .owner = THIS_MODULE,
+ .direction_input = max3107_gpio_direction_in,
+ .direction_output = max3107_gpio_direction_out,
+ .get = max3107_gpio_get,
+ .set = max3107_gpio_set,
+ .can_sleep = 1,
+ .base = MAX3107_GPIO_BASE,
+ .ngpio = MAX3107_GPIO_COUNT,
+};
+
+/**
+ * max3107_aava_reset - reset on AAVA systems
+ * @spi: The SPI device we are probing
+ *
+ * Reset the device ready for probing.
+ */
+
+static int max3107_aava_reset(struct spi_device *spi)
+{
+ /* Reset the chip */
+ if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
+ pr_err("Requesting RESET GPIO failed\n");
+ return -EIO;
+ }
+ if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
+ pr_err("Setting RESET GPIO to 0 failed\n");
+ gpio_free(MAX3107_RESET_GPIO);
+ return -EIO;
+ }
+ msleep(MAX3107_RESET_DELAY);
+ if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
+ pr_err("Setting RESET GPIO to 1 failed\n");
+ gpio_free(MAX3107_RESET_GPIO);
+ return -EIO;
+ }
+ gpio_free(MAX3107_RESET_GPIO);
+ msleep(MAX3107_WAKEUP_DELAY);
+ return 0;
+}
+
+static int max3107_aava_configure(struct max3107_port *s)
+{
+ int retval;
+
+ /* Initialize GPIO chip data */
+ s->chip = max3107_gpio_chip;
+ s->chip.label = s->spi->modalias;
+ s->chip.dev = &s->spi->dev;
+
+ /* Add GPIO chip */
+ retval = gpiochip_add(&s->chip);
+ if (retval) {
+ dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
+ return retval;
+ }
+
+ /* Temporary fix for EV2 boot problems, set modem reset to 0 */
+ max3107_gpio_direction_out(&s->chip, 3, 0);
+ return 0;
+}
+
+#if 0
+/* This will get enabled once we have the board stuff merged for this
+ specific case */
+
+static const struct baud_table brg13_ext[] = {
+ { 300, MAX3107_BRG13_B300 },
+ { 600, MAX3107_BRG13_B600 },
+ { 1200, MAX3107_BRG13_B1200 },
+ { 2400, MAX3107_BRG13_B2400 },
+ { 4800, MAX3107_BRG13_B4800 },
+ { 9600, MAX3107_BRG13_B9600 },
+ { 19200, MAX3107_BRG13_B19200 },
+ { 57600, MAX3107_BRG13_B57600 },
+ { 115200, MAX3107_BRG13_B115200 },
+ { 230400, MAX3107_BRG13_B230400 },
+ { 460800, MAX3107_BRG13_B460800 },
+ { 921600, MAX3107_BRG13_B921600 },
+ { 0, 0 }
+};
+
+static void max3107_aava_init(struct max3107_port *s)
+{
+ /*override for AAVA SC specific*/
+ if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
+ if (get_koski_build_id() <= KOSKI_EV2)
+ if (s->ext_clk) {
+ s->brg_cfg = MAX3107_BRG13_B9600;
+ s->baud_tbl = (struct baud_table *)brg13_ext;
+ }
+ }
+}
+#endif
+
+static int __devexit max3107_aava_remove(struct spi_device *spi)
+{
+ struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+ /* Remove GPIO chip */
+ if (gpiochip_remove(&s->chip))
+ dev_warn(&spi->dev, "Removing GPIO chip failed\n");
+
+ /* Then do the default remove */
+ return max3107_remove(spi);
+}
+
+/* Platform data */
+static struct max3107_plat aava_plat_data = {
+ .loopback = 0,
+ .ext_clk = 1,
+/* .init = max3107_aava_init, */
+ .configure = max3107_aava_configure,
+ .hw_suspend = max3107_hw_susp,
+ .polled_mode = 0,
+ .poll_time = 0,
+};
+
+
+static int __devinit max3107_probe_aava(struct spi_device *spi)
+{
+ int err = max3107_aava_reset(spi);
+ if (err < 0)
+ return err;
+ return max3107_probe(spi, &aava_plat_data);
+}
+
+/* Spi driver data */
+static struct spi_driver max3107_driver = {
+ .driver = {
+ .name = "aava-max3107",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = max3107_probe_aava,
+ .remove = __devexit_p(max3107_aava_remove),
+ .suspend = max3107_suspend,
+ .resume = max3107_resume,
+};
+
+/* Driver init function */
+static int __init max3107_init(void)
+{
+ return spi_register_driver(&max3107_driver);
+}
+
+/* Driver exit function */
+static void __exit max3107_exit(void)
+{
+ spi_unregister_driver(&max3107_driver);
+}
+
+module_init(max3107_init);
+module_exit(max3107_exit);
+
+MODULE_DESCRIPTION("MAX3107 driver");
+MODULE_AUTHOR("Aavamobile");
+MODULE_ALIAS("aava-max3107-spi");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c
index a96ddd388ffd8..67283c1a57ff6 100644
--- a/drivers/serial/max3107.c
+++ b/drivers/serial/max3107.c
@@ -31,98 +31,12 @@
#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/freezer.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/sfi.h>
-#include <asm/mrst.h>
#include "max3107.h"
-struct baud_table {
- int baud;
- u32 new_brg;
-};
-
-struct max3107_port {
- /* UART port structure */
- struct uart_port port;
-
- /* SPI device structure */
- struct spi_device *spi;
-
- /* GPIO chip stucture */
- struct gpio_chip chip;
-
- /* Workqueue that does all the magic */
- struct workqueue_struct *workqueue;
- struct work_struct work;
-
- /* Lock for shared data */
- spinlock_t data_lock;
-
- /* Device configuration */
- int ext_clk; /* 1 if external clock used */
- int loopback; /* Current loopback mode state */
- int baud; /* Current baud rate */
-
- /* State flags */
- int suspended; /* Indicates suspend mode */
- int tx_fifo_empty; /* Flag for TX FIFO state */
- int rx_enabled; /* Flag for receiver state */
- int tx_enabled; /* Flag for transmitter state */
-
- u16 irqen_reg; /* Current IRQ enable register value */
- /* Shared data */
- u16 mode1_reg; /* Current mode1 register value*/
- int mode1_commit; /* Flag for setting new mode1 register value */
- u16 lcr_reg; /* Current LCR register value */
- int lcr_commit; /* Flag for setting new LCR register value */
- u32 brg_cfg; /* Current Baud rate generator config */
- int brg_commit; /* Flag for setting new baud rate generator
- * config
- */
- struct baud_table *baud_tbl;
- int handle_irq; /* Indicates that IRQ should be handled */
-
- /* Rx buffer and str*/
- u16 *rxbuf;
- u8 *rxstr;
- /* Tx buffer*/
- u16 *txbuf;
-};
-
-/* Platform data structure */
-struct max3107_plat {
- /* Loopback mode enable */
- int loopback;
- /* External clock enable */
- int ext_clk;
- /* HW suspend function */
- void (*max3107_hw_suspend) (struct max3107_port *s, int suspend);
- /* Polling mode enable */
- int polled_mode;
- /* Polling period if polling mode enabled */
- int poll_time;
-};
-
-static struct baud_table brg13_ext[] = {
- { 300, MAX3107_BRG13_B300 },
- { 600, MAX3107_BRG13_B600 },
- { 1200, MAX3107_BRG13_B1200 },
- { 2400, MAX3107_BRG13_B2400 },
- { 4800, MAX3107_BRG13_B4800 },
- { 9600, MAX3107_BRG13_B9600 },
- { 19200, MAX3107_BRG13_B19200 },
- { 57600, MAX3107_BRG13_B57600 },
- { 115200, MAX3107_BRG13_B115200 },
- { 230400, MAX3107_BRG13_B230400 },
- { 460800, MAX3107_BRG13_B460800 },
- { 921600, MAX3107_BRG13_B921600 },
- { 0, 0 }
-};
-
-static struct baud_table brg26_ext[] = {
+static const struct baud_table brg26_ext[] = {
{ 300, MAX3107_BRG26_B300 },
{ 600, MAX3107_BRG26_B600 },
{ 1200, MAX3107_BRG26_B1200 },
@@ -138,7 +52,7 @@ static struct baud_table brg26_ext[] = {
{ 0, 0 }
};
-static struct baud_table brg13_int[] = {
+static const struct baud_table brg13_int[] = {
{ 300, MAX3107_BRG13_IB300 },
{ 600, MAX3107_BRG13_IB600 },
{ 1200, MAX3107_BRG13_IB1200 },
@@ -157,7 +71,7 @@ static struct baud_table brg13_int[] = {
static u32 get_new_brg(int baud, struct max3107_port *s)
{
int i;
- struct baud_table *baud_tbl = s->baud_tbl;
+ const struct baud_table *baud_tbl = s->baud_tbl;
for (i = 0; i < 13; i++) {
if (baud == baud_tbl[i].baud)
@@ -168,7 +82,7 @@ static u32 get_new_brg(int baud, struct max3107_port *s)
}
/* Perform SPI transfer for write/read of device register(s) */
-static int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
+int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
{
struct spi_message spi_msg;
struct spi_transfer spi_xfer;
@@ -213,6 +127,7 @@ static int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
#endif
return 0;
}
+EXPORT_SYMBOL_GPL(max3107_rw);
/* Puts received data to circular buffer */
static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data,
@@ -611,16 +526,10 @@ static void max3107_register_init(struct max3107_port *s)
s->brg_cfg = MAX3107_BRG13_IB9600;
s->baud_tbl = (struct baud_table *)brg13_int;
}
-#if 0
- /*override for AAVA SC specific*/
- if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
- if (get_koski_build_id() <= KOSKI_EV2)
- if (s->ext_clk) {
- s->brg_cfg = MAX3107_BRG13_B9600;
- s->baud_tbl = (struct baud_table *)brg13_ext;
- }
- }
-#endif
+
+ if (s->pdata->init)
+ s->pdata->init(s);
+
buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG)
| ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK);
buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG)
@@ -734,7 +643,7 @@ static irqreturn_t max3107_irq(int irqno, void *dev_id)
* used but that would mess the GPIOs
*
*/
-static void max3107_hw_susp(struct max3107_port *s, int suspend)
+void max3107_hw_susp(struct max3107_port *s, int suspend)
{
pr_debug("enter, suspend %d\n", suspend);
@@ -752,6 +661,7 @@ static void max3107_hw_susp(struct max3107_port *s, int suspend)
max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP);
}
}
+EXPORT_SYMBOL_GPL(max3107_hw_susp);
/* Modem status IRQ enabling */
static void max3107_enable_ms(struct uart_port *port)
@@ -899,10 +809,8 @@ static void max3107_shutdown(struct uart_port *port)
{
struct max3107_port *s = container_of(port, struct max3107_port, port);
- if (s->suspended) {
- /* Resume HW */
- max3107_hw_susp(s, 0);
- }
+ if (s->suspended && s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
/* Free the interrupt */
free_irq(s->spi->irq, s);
@@ -915,7 +823,8 @@ static void max3107_shutdown(struct uart_port *port)
}
/* Suspend HW */
- max3107_hw_susp(s, 1);
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 1);
}
/* Port startup function */
@@ -941,7 +850,8 @@ static int max3107_startup(struct uart_port *port)
}
/* Resume HW */
- max3107_hw_susp(s, 0);
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
/* Init registers */
max3107_register_init(s);
@@ -973,16 +883,14 @@ static int max3107_request_port(struct uart_port *port)
static void max3107_config_port(struct uart_port *port, int flags)
{
struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- /* Use PORT_MAX3100 since we are at least int the same series */
- s->port.type = PORT_MAX3100;
+ s->port.type = PORT_MAX3107;
}
/* Port verify function */
static int max3107_verify_port(struct uart_port *port,
struct serial_struct *ser)
{
- if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100)
+ if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107)
return 0;
return -EINVAL;
@@ -1000,157 +908,6 @@ static void max3107_break_ctl(struct uart_port *port, int break_state)
/* We don't support break control, do nothing */
}
-/* GPIO direction to input function */
-static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
-{
- struct max3107_port *s = container_of(chip, struct max3107_port, chip);
- u16 buf[1]; /* Buffer for SPI transfer */
-
- if (offset >= MAX3107_GPIO_COUNT) {
- dev_err(&s->spi->dev, "Invalid GPIO\n");
- return -EINVAL;
- }
-
- /* Read current GPIO configuration register */
- buf[0] = MAX3107_GPIOCFG_REG;
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
- dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
- return -EIO;
- }
- buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-
- /* Set GPIO to input */
- buf[0] &= ~(0x0001 << offset);
-
- /* Write new GPIO configuration register value */
- buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
- dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
- return -EIO;
- }
- return 0;
-}
-
-/* GPIO direction to output function */
-static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct max3107_port *s = container_of(chip, struct max3107_port, chip);
- u16 buf[2]; /* Buffer for SPI transfers */
-
- if (offset >= MAX3107_GPIO_COUNT) {
- dev_err(&s->spi->dev, "Invalid GPIO\n");
- return -EINVAL;
- }
-
- /* Read current GPIO configuration and data registers */
- buf[0] = MAX3107_GPIOCFG_REG;
- buf[1] = MAX3107_GPIODATA_REG;
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
- dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
- return -EIO;
- }
- buf[0] &= MAX3107_SPI_RX_DATA_MASK;
- buf[1] &= MAX3107_SPI_RX_DATA_MASK;
-
- /* Set GPIO to output */
- buf[0] |= (0x0001 << offset);
- /* Set value */
- if (value)
- buf[1] |= (0x0001 << offset);
- else
- buf[1] &= ~(0x0001 << offset);
-
- /* Write new GPIO configuration and data register values */
- buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
- buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
- dev_err(&s->spi->dev,
- "SPI transfer for GPIO conf data w failed\n");
- return -EIO;
- }
- return 0;
-}
-
-/* GPIO value query function */
-static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct max3107_port *s = container_of(chip, struct max3107_port, chip);
- u16 buf[1]; /* Buffer for SPI transfer */
-
- if (offset >= MAX3107_GPIO_COUNT) {
- dev_err(&s->spi->dev, "Invalid GPIO\n");
- return -EINVAL;
- }
-
- /* Read current GPIO data register */
- buf[0] = MAX3107_GPIODATA_REG;
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
- dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
- return -EIO;
- }
- buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-
- /* Return value */
- return buf[0] & (0x0001 << offset);
-}
-
-/* GPIO value set function */
-static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct max3107_port *s = container_of(chip, struct max3107_port, chip);
- u16 buf[2]; /* Buffer for SPI transfers */
-
- if (offset >= MAX3107_GPIO_COUNT) {
- dev_err(&s->spi->dev, "Invalid GPIO\n");
- return;
- }
-
- /* Read current GPIO configuration registers*/
- buf[0] = MAX3107_GPIODATA_REG;
- buf[1] = MAX3107_GPIOCFG_REG;
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
- dev_err(&s->spi->dev,
- "SPI transfer for GPIO data and config read failed\n");
- return;
- }
- buf[0] &= MAX3107_SPI_RX_DATA_MASK;
- buf[1] &= MAX3107_SPI_RX_DATA_MASK;
-
- if (!(buf[1] & (0x0001 << offset))) {
- /* Configured as input, can't set value */
- dev_warn(&s->spi->dev,
- "Trying to set value for input GPIO\n");
- return;
- }
-
- /* Set value */
- if (value)
- buf[0] |= (0x0001 << offset);
- else
- buf[0] &= ~(0x0001 << offset);
-
- /* Write new GPIO data register value */
- buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, 2))
- dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
-}
-
-/* Platform data */
-static struct max3107_plat max3107_plat_data = {
- .loopback = 0,
- .ext_clk = 1,
- .max3107_hw_suspend = &max3107_hw_susp,
- .polled_mode = 0,
- .poll_time = 0,
-};
/* Port functions */
static struct uart_ops max3107_ops = {
@@ -1180,52 +937,48 @@ static struct uart_driver max3107_uart_driver = {
.nr = 1,
};
-/* GPIO chip data */
-static struct gpio_chip max3107_gpio_chip = {
- .owner = THIS_MODULE,
- .direction_input = max3107_gpio_direction_in,
- .direction_output = max3107_gpio_direction_out,
- .get = max3107_gpio_get,
- .set = max3107_gpio_set,
- .can_sleep = 1,
- .base = MAX3107_GPIO_BASE,
- .ngpio = MAX3107_GPIO_COUNT,
+static int driver_registered = 0;
+
+
+
+/* 'Generic' platform data */
+static struct max3107_plat generic_plat_data = {
+ .loopback = 0,
+ .ext_clk = 1,
+ .hw_suspend = max3107_hw_susp,
+ .polled_mode = 0,
+ .poll_time = 0,
};
-/* Device probe function */
-static int __devinit max3107_probe(struct spi_device *spi)
+
+
+/*******************************************************************/
+
+/**
+ * max3107_probe - SPI bus probe entry point
+ * @spi: the spi device
+ *
+ * SPI wants us to probe this device and if appropriate claim it.
+ * Perform any platform specific requirements and then initialise
+ * the device.
+ */
+
+int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
{
struct max3107_port *s;
- struct max3107_plat *pdata = &max3107_plat_data;
u16 buf[2]; /* Buffer for SPI transfers */
int retval;
pr_info("enter max3107 probe\n");
- /* Reset the chip */
- if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
- pr_err("Requesting RESET GPIO failed\n");
- return -EIO;
- }
- if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
- pr_err("Setting RESET GPIO to 0 failed\n");
- gpio_free(MAX3107_RESET_GPIO);
- return -EIO;
- }
- msleep(MAX3107_RESET_DELAY);
- if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
- pr_err("Setting RESET GPIO to 1 failed\n");
- gpio_free(MAX3107_RESET_GPIO);
- return -EIO;
- }
- gpio_free(MAX3107_RESET_GPIO);
- msleep(MAX3107_WAKEUP_DELAY);
-
/* Allocate port structure */
s = kzalloc(sizeof(*s), GFP_KERNEL);
if (!s) {
pr_err("Allocating port structure failed\n");
return -ENOMEM;
}
+
+ s->pdata = pdata;
+
/* SPI Rx buffer
* +2 for RX FIFO interrupt
* disabling and RX level query
@@ -1298,10 +1051,13 @@ static int __devinit max3107_probe(struct spi_device *spi)
}
/* Register UART driver */
- retval = uart_register_driver(&max3107_uart_driver);
- if (retval) {
- dev_err(&s->spi->dev, "Registering UART driver failed\n");
- return retval;
+ if (!driver_registered) {
+ retval = uart_register_driver(&max3107_uart_driver);
+ if (retval) {
+ dev_err(&s->spi->dev, "Registering UART driver failed\n");
+ return retval;
+ }
+ driver_registered = 1;
}
/* Initialize UART port data */
@@ -1312,8 +1068,7 @@ static int __devinit max3107_probe(struct spi_device *spi)
s->port.uartclk = 9600;
s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
s->port.irq = s->spi->irq;
- /* Use PORT_MAX3100 since we are at least in the same series */
- s->port.type = PORT_MAX3100;
+ s->port.type = PORT_MAX3107;
/* Add UART port */
retval = uart_add_one_port(&max3107_uart_driver, &s->port);
@@ -1322,44 +1077,31 @@ static int __devinit max3107_probe(struct spi_device *spi)
return retval;
}
- /* Initialize GPIO chip data */
- s->chip = max3107_gpio_chip;
- s->chip.label = spi->modalias;
- s->chip.dev = &spi->dev;
-
- /* Add GPIO chip */
- retval = gpiochip_add(&s->chip);
- if (retval) {
- dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
- return retval;
+ if (pdata->configure) {
+ retval = pdata->configure(s);
+ if (retval < 0)
+ return retval;
}
- /* Temporary fix for EV2 boot problems, set modem reset to 0 */
- max3107_gpio_direction_out(&s->chip, 3, 0);
-
/* Go to suspend mode */
- max3107_hw_susp(s, 1);
+ if (pdata->hw_suspend)
+ pdata->hw_suspend(s, 1);
return 0;
}
+EXPORT_SYMBOL_GPL(max3107_probe);
/* Driver remove function */
-static int __devexit max3107_remove(struct spi_device *spi)
+int max3107_remove(struct spi_device *spi)
{
struct max3107_port *s = dev_get_drvdata(&spi->dev);
pr_info("enter max3107 remove\n");
- /* Remove GPIO chip */
- if (gpiochip_remove(&s->chip))
- dev_warn(&s->spi->dev, "Removing GPIO chip failed\n");
-
/* Remove port */
if (uart_remove_one_port(&max3107_uart_driver, &s->port))
dev_warn(&s->spi->dev, "Removing UART port failed\n");
- /* Unregister UART driver */
- uart_unregister_driver(&max3107_uart_driver);
/* Free TxRx buffer */
kfree(s->rxbuf);
@@ -1371,9 +1113,10 @@ static int __devexit max3107_remove(struct spi_device *spi)
return 0;
}
+EXPORT_SYMBOL_GPL(max3107_remove);
/* Driver suspend function */
-static int max3107_suspend(struct spi_device *spi, pm_message_t state)
+int max3107_suspend(struct spi_device *spi, pm_message_t state)
{
#ifdef CONFIG_PM
struct max3107_port *s = dev_get_drvdata(&spi->dev);
@@ -1384,13 +1127,15 @@ static int max3107_suspend(struct spi_device *spi, pm_message_t state)
uart_suspend_port(&max3107_uart_driver, &s->port);
/* Go to suspend mode */
- max3107_hw_susp(s, 1);
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 1);
#endif /* CONFIG_PM */
return 0;
}
+EXPORT_SYMBOL_GPL(max3107_suspend);
/* Driver resume function */
-static int max3107_resume(struct spi_device *spi)
+int max3107_resume(struct spi_device *spi)
{
#ifdef CONFIG_PM
struct max3107_port *s = dev_get_drvdata(&spi->dev);
@@ -1398,13 +1143,20 @@ static int max3107_resume(struct spi_device *spi)
pr_debug("enter resume\n");
/* Resume from suspend */
- max3107_hw_susp(s, 0);
+ if (s->pdata->hw_suspend)
+ s->pdata->hw_suspend(s, 0);
/* Resume UART port */
uart_resume_port(&max3107_uart_driver, &s->port);
#endif /* CONFIG_PM */
return 0;
}
+EXPORT_SYMBOL_GPL(max3107_resume);
+
+static int max3107_probe_generic(struct spi_device *spi)
+{
+ return max3107_probe(spi, &generic_plat_data);
+}
/* Spi driver data */
static struct spi_driver max3107_driver = {
@@ -1413,7 +1165,7 @@ static struct spi_driver max3107_driver = {
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
- .probe = max3107_probe,
+ .probe = max3107_probe_generic,
.remove = __devexit_p(max3107_remove),
.suspend = max3107_suspend,
.resume = max3107_resume,
@@ -1430,6 +1182,9 @@ static int __init max3107_init(void)
static void __exit max3107_exit(void)
{
pr_info("enter max3107 exit\n");
+ /* Unregister UART driver */
+ if (driver_registered)
+ uart_unregister_driver(&max3107_uart_driver);
spi_unregister_driver(&max3107_driver);
}
@@ -1438,5 +1193,5 @@ module_exit(max3107_exit);
MODULE_DESCRIPTION("MAX3107 driver");
MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("max3107-spi-uart");
-MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("max3107-spi");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h
index a5625d1f263d0..72b30415f4179 100644
--- a/drivers/serial/max3107.h
+++ b/drivers/serial/max3107.h
@@ -10,8 +10,8 @@
* (at your option) any later version.
*/
-#ifndef _LINUX_SERIAL_MAX3107_H
-#define _LINUX_SERIAL_MAX3107_H
+#ifndef _MAX3107_H
+#define _MAX3107_H
/* Serial error status definitions */
#define MAX3107_PARITY_ERROR 1
@@ -355,4 +355,85 @@
#define MAX3107_BRG13_IB460800 (0x000000 | 0x00)
#define MAX3107_BRG13_IB921600 (0x000000 | 0x00)
+
+struct baud_table {
+ int baud;
+ u32 new_brg;
+};
+
+struct max3107_port {
+ /* UART port structure */
+ struct uart_port port;
+
+ /* SPI device structure */
+ struct spi_device *spi;
+
+ /* GPIO chip stucture */
+ struct gpio_chip chip;
+
+ /* Workqueue that does all the magic */
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ /* Lock for shared data */
+ spinlock_t data_lock;
+
+ /* Device configuration */
+ int ext_clk; /* 1 if external clock used */
+ int loopback; /* Current loopback mode state */
+ int baud; /* Current baud rate */
+
+ /* State flags */
+ int suspended; /* Indicates suspend mode */
+ int tx_fifo_empty; /* Flag for TX FIFO state */
+ int rx_enabled; /* Flag for receiver state */
+ int tx_enabled; /* Flag for transmitter state */
+
+ u16 irqen_reg; /* Current IRQ enable register value */
+ /* Shared data */
+ u16 mode1_reg; /* Current mode1 register value*/
+ int mode1_commit; /* Flag for setting new mode1 register value */
+ u16 lcr_reg; /* Current LCR register value */
+ int lcr_commit; /* Flag for setting new LCR register value */
+ u32 brg_cfg; /* Current Baud rate generator config */
+ int brg_commit; /* Flag for setting new baud rate generator
+ * config
+ */
+ struct baud_table *baud_tbl;
+ int handle_irq; /* Indicates that IRQ should be handled */
+
+ /* Rx buffer and str*/
+ u16 *rxbuf;
+ u8 *rxstr;
+ /* Tx buffer*/
+ u16 *txbuf;
+
+ struct max3107_plat *pdata; /* Platform data */
+};
+
+/* Platform data structure */
+struct max3107_plat {
+ /* Loopback mode enable */
+ int loopback;
+ /* External clock enable */
+ int ext_clk;
+ /* Called during the register initialisation */
+ void (*init)(struct max3107_port *s);
+ /* Called when the port is found and configured */
+ int (*configure)(struct max3107_port *s);
+ /* HW suspend function */
+ void (*hw_suspend) (struct max3107_port *s, int suspend);
+ /* Polling mode enable */
+ int polled_mode;
+ /* Polling period if polling mode enabled */
+ int poll_time;
+};
+
+extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len);
+extern void max3107_hw_susp(struct max3107_port *s, int suspend);
+extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata);
+extern int max3107_remove(struct spi_device *spi);
+extern int max3107_suspend(struct spi_device *spi, pm_message_t state);
+extern int max3107_resume(struct spi_device *spi);
+
#endif /* _LINUX_SERIAL_MAX3107_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 32928161fab63..9ddc866ccc09c 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -186,6 +186,10 @@
#define PORT_ALTERA_JTAGUART 91
#define PORT_ALTERA_UART 92
+/* MAX3107 */
+#define PORT_MAX3107 94
+
+
#ifdef __KERNEL__
#include <linux/compiler.h>
--
GitLab
From 2b50d24760a7c0b62180e6fb5a44c2ce3db66abd Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Tue, 29 Jun 2010 14:15:09 +0400
Subject: [PATCH 689/863] tty_io: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/tty_io.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 4c4030c12d3a9..0350c42375a21 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -893,7 +893,7 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
struct inode *inode;
struct tty_ldisc *ld;
- tty = (struct tty_struct *)file->private_data;
+ tty = file->private_data;
inode = file->f_path.dentry->d_inode;
if (tty_paranoia_check(tty, inode, "tty_read"))
return -EIO;
@@ -1070,7 +1070,7 @@ static ssize_t tty_write(struct file *file, const char __user *buf,
ssize_t ret;
struct tty_ldisc *ld;
- tty = (struct tty_struct *)file->private_data;
+ tty = file->private_data;
if (tty_paranoia_check(tty, inode, "tty_write"))
return -EIO;
if (!tty || !tty->ops->write ||
@@ -1513,7 +1513,7 @@ int tty_release(struct inode *inode, struct file *filp)
int idx;
char buf[64];
- tty = (struct tty_struct *)filp->private_data;
+ tty = filp->private_data;
if (tty_paranoia_check(tty, inode, "tty_release_dev"))
return 0;
@@ -1920,7 +1920,7 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait)
struct tty_ldisc *ld;
int ret = 0;
- tty = (struct tty_struct *)filp->private_data;
+ tty = filp->private_data;
if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll"))
return 0;
@@ -1937,7 +1937,7 @@ static int __tty_fasync(int fd, struct file *filp, int on)
unsigned long flags;
int retval = 0;
- tty = (struct tty_struct *)filp->private_data;
+ tty = filp->private_data;
if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync"))
goto out;
@@ -2497,7 +2497,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
struct tty_ldisc *ld;
struct inode *inode = file->f_dentry->d_inode;
- tty = (struct tty_struct *)file->private_data;
+ tty = file->private_data;
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
--
GitLab
From 75e0b946cf2fef14236ff999b6d7eacbae2034b0 Mon Sep 17 00:00:00 2001
From: Kevin Winchester <kjwinchester@gmail.com>
Date: Sat, 10 Jul 2010 18:57:56 -0300
Subject: [PATCH 690/863] vt: Fix warning: statement with no effect due to
vt_kern.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Using:
gcc (GCC) 4.5.0 20100610 (prerelease)
with CONFIG_CONSOLE_TRANSLATIONS=n, the following warnings are seen:
drivers/char/vt_ioctl.c: In function ‘vt_ioctl’:
drivers/char/vt_ioctl.c:1309:4: warning: statement with no effect
drivers/char/vt.c: In function ‘vc_allocate’:
drivers/char/vt.c:774:3: warning: statement with no effect
drivers/video/console/vgacon.c: In function ‘vgacon_init’:
drivers/video/console/vgacon.c:587:3: warning: statement with no effect
drivers/video/console/vgacon.c: In function ‘vgacon_deinit’:
drivers/video/console/vgacon.c:606:2: warning: statement with no effect
drivers/video/console/fbcon.c: In function ‘fbcon_init’:
drivers/video/console/fbcon.c:1087:3: warning: statement with no effect
drivers/video/console/fbcon.c:1089:3: warning: statement with no effect
drivers/video/console/fbcon.c: In function ‘fbcon_set_disp’:
drivers/video/console/fbcon.c:1369:3: warning: statement with no effect
drivers/video/console/fbcon.c:1371:3: warning: statement with no effect
This is because several functions in include/linux/vt_kern.h are
defined to (0). Convert them to static inline functions to
silence the warnings and gain a bit of type safety.
Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
include/linux/vt_kern.h | 57 +++++++++++++++++++++++++++++++++--------
1 file changed, 46 insertions(+), 11 deletions(-)
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 56cce345aa8d6..6625cc1ab7581 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -76,17 +76,52 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
#define vc_translate(vc, c) ((vc)->vc_translate[(c) | \
((vc)->vc_toggle_meta ? 0x80 : 0)])
#else
-#define con_set_trans_old(arg) (0)
-#define con_get_trans_old(arg) (-EINVAL)
-#define con_set_trans_new(arg) (0)
-#define con_get_trans_new(arg) (-EINVAL)
-#define con_clear_unimap(vc, ui) (0)
-#define con_set_unimap(vc, ct, list) (0)
-#define con_set_default_unimap(vc) (0)
-#define con_copy_unimap(d, s) (0)
-#define con_get_unimap(vc, ct, uct, list) (-EINVAL)
-#define con_free_unimap(vc) do { ; } while (0)
-#define con_protect_unimap(vc, rdonly) do { ; } while (0)
+static inline int con_set_trans_old(unsigned char __user *table)
+{
+ return 0;
+}
+static inline int con_get_trans_old(unsigned char __user *table)
+{
+ return -EINVAL;
+}
+static inline int con_set_trans_new(unsigned short __user *table)
+{
+ return 0;
+}
+static inline int con_get_trans_new(unsigned short __user *table)
+{
+ return -EINVAL;
+}
+static inline int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
+{
+ return 0;
+}
+static inline
+int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
+{
+ return 0;
+}
+static inline
+int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct,
+ struct unipair __user *list)
+{
+ return -EINVAL;
+}
+static inline int con_set_default_unimap(struct vc_data *vc)
+{
+ return 0;
+}
+static inline void con_free_unimap(struct vc_data *vc)
+{
+}
+static inline void con_protect_unimap(struct vc_data *vc, int rdonly)
+{
+}
+static inline
+int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
+{
+ return 0;
+}
#define vc_translate(vc, c) (c)
#endif
--
GitLab
From 078dee2d298d003f19203b120b7438beea681e60 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Wed, 14 Jul 2010 22:04:42 +0400
Subject: [PATCH 691/863] serial: crisv10: formatting of pointers in printk()
Use %p instead of %08x in printk().
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/crisv10.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 5696710b6f2dd..c856905bb3bdf 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -4533,8 +4533,8 @@ static int __init rs_init(void)
INIT_WORK(&info->work, do_softint);
if (info->enabled) {
- printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
- serial_driver->name, info->line, (unsigned int)info->ioport);
+ printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n",
+ serial_driver->name, info->line, info->ioport);
}
}
#ifdef CONFIG_ETRAX_FAST_TIMER
--
GitLab
From e8dd4757a6cf0a8909148a61b89fa3a6d4f9b3ee Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Tue, 20 Jul 2010 15:26:10 -0700
Subject: [PATCH 692/863] serial: "altera_uart: simplify
altera_uart_console_putc()" checkpatch fixes
ERROR: code indent should use tabs where possible
#32: FILE: drivers/serial/altera_uart.c:397:
+^I ALTERA_UART_STATUS_TRDY_MSK))$
total: 1 errors, 0 warnings, 39 lines checked
./patches/altera_uart-simplify-altera_uart_console_putc.patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
This fix got lost when someone merged "altera_uart: simplify
altera_uart_console_putc()". Please don't lose fixes. Please don't write
of mere patches which have trivial checkpatch errors.
Cc: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/altera_uart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index 0f1189605d214..f8d8a00554da2 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -394,7 +394,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
static void altera_uart_console_putc(struct uart_port *port, const char c)
{
while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
- ALTERA_UART_STATUS_TRDY_MSK))
+ ALTERA_UART_STATUS_TRDY_MSK))
cpu_relax();
writel(c, port->membase + ALTERA_UART_TXDATA_REG);
--
GitLab
From 93e3d58284626ff6466f9c3dac8800cd6f8079c6 Mon Sep 17 00:00:00 2001
From: John Villalovos <jvillalo@redhat.com>
Date: Tue, 20 Jul 2010 15:26:46 -0700
Subject: [PATCH 693/863] serial: fix missing bit coverage of ASYNC_FLAGS
It seems that currently ASYNC_FLAGS is one bit short of covering all the
bits of the ASYNC user flags. In particular it does not cover the
ASYNC_AUTOPROBE bit.
ASYNCB_LAST_USER and ASYNCB_AUTOPROBE are both equal to 15.
Therefore:
ASYNC_AUTOPROBE = 1000 0000 0000 0000
ASYNC_FLAGS = 0111 1111 1111 1111
So ASYNC_FLAGS is not covering the ASYNC_AUTOPROBE bit.
This patch fixes the issue and with the patch the values will be:
ASYNC_AUTOPROBE = 1000 0000 0000 0000
ASYNC_FLAGS = 1111 1111 1111 1111
As a side note, doing a "git grep" I didn't find any use of
ASYNC_AUTOPROBE or ASYNCB_AUTOPROBE in the kernel, besides this include
file.
Signed-off-by: John Villalovos <john.l.villalovos@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
include/linux/serial.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/serial.h b/include/linux/serial.h
index c8613c3ff9d30..c3b45add494dc 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -151,7 +151,7 @@ struct serial_uart_config {
#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
-#define ASYNC_FLAGS ((1U << ASYNCB_LAST_USER) - 1)
+#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
#define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \
ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
--
GitLab
From 1b6331848b69d1ed165a6bdc75c4046d68767563 Mon Sep 17 00:00:00 2001
From: Claudio Scordino <claudio@evidence.eu.com>
Date: Tue, 20 Jul 2010 15:26:47 -0700
Subject: [PATCH 694/863] serial: general fixes in the serial_rs485 structure
Fix several issues related to the RS485 interface:
- It adds the flag SER_RS485_RTS_BEFORE_SEND that was missing from the
serial_rs485 structure (even if "delay_rts_before_send" was existing)
- It adds a further "delay_rts_after_send" field for those drivers that
can have a delay after send (e.g., atmel_serial)
- It fixes the usage of the structure in the atmel_serial driver (where
"delay_rts_before_send" should be used instead of "delay_rts_after_send").
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Bernhard Roth <br@pwrnet.de>
Cc: Philippe De Muyter <phdm@macqel.be>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/atmel_serial.c | 11 ++++++++---
include/linux/serial.h | 4 +++-
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index a182def7007d2..3892666b5fbdf 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -217,7 +217,8 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
- UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
+ if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -292,7 +293,9 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+ if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port,
+ atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -1211,7 +1214,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+ if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ UART_PUT_TTGR(port,
+ atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
diff --git a/include/linux/serial.h b/include/linux/serial.h
index c3b45add494dc..ef914061511ec 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -210,8 +210,10 @@ struct serial_rs485 {
#define SER_RS485_ENABLED (1 << 0)
#define SER_RS485_RTS_ON_SEND (1 << 1)
#define SER_RS485_RTS_AFTER_SEND (1 << 2)
+#define SER_RS485_RTS_BEFORE_SEND (1 << 3)
__u32 delay_rts_before_send; /* Milliseconds */
- __u32 padding[6]; /* Memory is cheap, new structs
+ __u32 delay_rts_after_send; /* Milliseconds */
+ __u32 padding[5]; /* Memory is cheap, new structs
are a royal PITA .. */
};
--
GitLab
From 0ac8382e9cfdd723445692fc97aaa4643929750d Mon Sep 17 00:00:00 2001
From: Yury Georgievskiy <ygeorgie@gmail.com>
Date: Tue, 20 Jul 2010 15:26:50 -0700
Subject: [PATCH 695/863] serial: mcf: don't take spinlocks in already
protected functions
Don't take the port spinlock in uart functions where the serial core
already takes care of locking/unlocking them.
The code would actually lock up on architectures where spinlocks are
implemented.
Also protect calling mcf_rx_chars/mcf_tx_chars in the interrupt handler by
the port spinlock and use IRQ_RETVAL to return from isr.
[akpm@linux-foundation.org: make irq-handler return value more explicit]
Signed-off-by: Yury Georgievskiy <ygeorgie@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/mcf.c | 31 +++++++++++++------------------
1 file changed, 13 insertions(+), 18 deletions(-)
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index b5aaef965f24e..3394b7cc17223 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -70,16 +70,14 @@ static unsigned int mcf_tx_empty(struct uart_port *port)
static unsigned int mcf_get_mctrl(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
unsigned int sigs;
- spin_lock_irqsave(&port->lock, flags);
sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ?
0 : TIOCM_CTS;
sigs |= (pp->sigs & TIOCM_RTS);
sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0);
sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0);
- spin_unlock_irqrestore(&port->lock, flags);
+
return sigs;
}
@@ -88,16 +86,13 @@ static unsigned int mcf_get_mctrl(struct uart_port *port)
static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->sigs = sigs;
mcf_setppdtr(port->line, (sigs & TIOCM_DTR));
if (sigs & TIOCM_RTS)
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
else
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -105,12 +100,9 @@ static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
static void mcf_start_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr |= MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -118,12 +110,9 @@ static void mcf_start_tx(struct uart_port *port)
static void mcf_stop_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -131,12 +120,9 @@ static void mcf_stop_tx(struct uart_port *port)
static void mcf_stop_rx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~MCFUART_UIR_RXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
- spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
@@ -366,13 +352,22 @@ static irqreturn_t mcf_interrupt(int irq, void *data)
struct uart_port *port = data;
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned int isr;
+ irqreturn_t ret = IRQ_NONE;
isr = readb(port->membase + MCFUART_UISR) & pp->imr;
- if (isr & MCFUART_UIR_RXREADY)
+
+ spin_lock(&port->lock);
+ if (isr & MCFUART_UIR_RXREADY) {
mcf_rx_chars(pp);
- if (isr & MCFUART_UIR_TXREADY)
+ ret = IRQ_HANDLED;
+ }
+ if (isr & MCFUART_UIR_TXREADY) {
mcf_tx_chars(pp);
- return IRQ_HANDLED;
+ ret = IRQ_HANDLED;
+ }
+ spin_unlock(&port->lock);
+
+ return ret;
}
/****************************************************************************/
--
GitLab
From 1917ac76e023339c73844bec775375b147f57ac7 Mon Sep 17 00:00:00 2001
From: Samium Gromoff <_deepfire@feelingofgreen.ru>
Date: Tue, 20 Jul 2010 15:26:51 -0700
Subject: [PATCH 696/863] serial: MMIO32 support for 8250_early.c
Provide MMIO32 support in 8250_early (aka earlycon)
[randy.dunlap@oracle.com: fix printk format warnings]
[akpm@linux-foundation.org: fix printk args some more]
Signed-off-by: Samium Gromoff <_deepfire@feelingofgreen.ru>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
Documentation/kernel-parameters.txt | 3 ++
drivers/serial/8250_early.c | 57 +++++++++++++++++++++--------
2 files changed, 45 insertions(+), 15 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 44f6b19c50bb8..d529b1363e95b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -681,8 +681,11 @@ and is between 256 and 4096 characters. It is defined in the file
earlycon= [KNL] Output early console device and options.
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
+ uart[8250],mmio32,<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
+ MMIO inter-register address stride is either 8bit (mmio)
+ or 32bit (mmio32).
The options are the same as for ttyS, above.
earlyprintk= [X86,SH,BLACKFIN]
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index f279745e9fefe..b745792ec25a0 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -19,9 +19,11 @@
* The user can specify the device directly, e.g.,
* earlycon=uart8250,io,0x3f8,9600n8
* earlycon=uart8250,mmio,0xff5e0000,115200n8
+ * earlycon=uart8250,mmio32,0xff5e0000,115200n8
* or
* console=uart8250,io,0x3f8,9600n8
* console=uart8250,mmio,0xff5e0000,115200n8
+ * console=uart8250,mmio32,0xff5e0000,115200n8
*/
#include <linux/tty.h>
@@ -48,18 +50,31 @@ static struct early_serial8250_device early_device;
static unsigned int __init serial_in(struct uart_port *port, int offset)
{
- if (port->iotype == UPIO_MEM)
+ switch (port->iotype) {
+ case UPIO_MEM:
return readb(port->membase + offset);
- else
+ case UPIO_MEM32:
+ return readl(port->membase + (offset << 2));
+ case UPIO_PORT:
return inb(port->iobase + offset);
+ default:
+ return 0;
+ }
}
static void __init serial_out(struct uart_port *port, int offset, int value)
{
- if (port->iotype == UPIO_MEM)
+ switch (port->iotype) {
+ case UPIO_MEM:
writeb(value, port->membase + offset);
- else
+ break;
+ case UPIO_MEM32:
+ writel(value, port->membase + (offset << 2));
+ break;
+ case UPIO_PORT:
outb(value, port->iobase + offset);
+ break;
+ }
}
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
@@ -137,15 +152,21 @@ static int __init parse_options(struct early_serial8250_device *device,
char *options)
{
struct uart_port *port = &device->port;
- int mmio, length;
+ int mmio, mmio32, length;
if (!options)
return -ENODEV;
port->uartclk = BASE_BAUD * 16;
- if (!strncmp(options, "mmio,", 5)) {
- port->iotype = UPIO_MEM;
- port->mapbase = simple_strtoul(options + 5, &options, 0);
+
+ mmio = !strncmp(options, "mmio,", 5);
+ mmio32 = !strncmp(options, "mmio32,", 7);
+ if (mmio || mmio32) {
+ port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
+ port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
+ &options, 0);
+ if (mmio32)
+ port->regshift = 2;
#ifdef CONFIG_FIX_EARLYCON_MEM
set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
port->mapbase & PAGE_MASK);
@@ -157,11 +178,10 @@ static int __init parse_options(struct early_serial8250_device *device,
if (!port->membase) {
printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
__func__,
- (unsigned long long)port->mapbase);
+ (unsigned long long) port->mapbase);
return -ENOMEM;
}
#endif
- mmio = 1;
} else if (!strncmp(options, "io,", 3)) {
port->iotype = UPIO_PORT;
port->iobase = simple_strtoul(options + 3, &options, 0);
@@ -181,11 +201,18 @@ static int __init parse_options(struct early_serial8250_device *device,
device->baud);
}
- printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
- mmio ? "MMIO" : "I/O port",
- mmio ? (unsigned long long) port->mapbase
- : (unsigned long long) port->iobase,
- device->options);
+ if (mmio || mmio32)
+ printk(KERN_INFO
+ "Early serial console at MMIO%s 0x%llu (options '%s')\n",
+ mmio32 ? "32" : "",
+ (unsigned long long)port->mapbase,
+ device->options);
+ else
+ printk(KERN_INFO
+ "Early serial console at I/O port 0x%lu (options '%s')\n",
+ port->iobase,
+ device->options);
+
return 0;
}
--
GitLab
From b1a6f24394d44b7bd2c8ec3f301a5eda72ce462f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Richard=20R=C3=B6jfors?= <richard.rojfors@pelagicore.com>
Date: Tue, 20 Jul 2010 15:26:53 -0700
Subject: [PATCH 697/863] timbuart: use __devinit and __devexit macros for
probe and remove
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Move the probe and remove functions to the devinit and devexit sections.
Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/timbuart.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 67ca642713b8d..1f36b7eb7351e 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -423,7 +423,7 @@ static struct uart_driver timbuart_driver = {
.nr = 1
};
-static int timbuart_probe(struct platform_device *dev)
+static int __devinit timbuart_probe(struct platform_device *dev)
{
int err, irq;
struct timbuart_port *uart;
@@ -489,7 +489,7 @@ static int timbuart_probe(struct platform_device *dev)
return err;
}
-static int timbuart_remove(struct platform_device *dev)
+static int __devexit timbuart_remove(struct platform_device *dev)
{
struct timbuart_port *uart = platform_get_drvdata(dev);
@@ -507,7 +507,7 @@ static struct platform_driver timbuart_platform_driver = {
.owner = THIS_MODULE,
},
.probe = timbuart_probe,
- .remove = timbuart_remove,
+ .remove = __devexit_p(timbuart_remove),
};
/*--------------------------------------------------------------------------*/
--
GitLab
From f5e92c3f9ca148181f1baaec8db271845b2420f0 Mon Sep 17 00:00:00 2001
From: Christoph Egger <siccegge@cs.fau.de>
Date: Tue, 20 Jul 2010 15:26:54 -0700
Subject: [PATCH 698/863] serial: 68328serial.c: remove dead (ALMA_ANS |
DRAGONIXVZ | M68EZ328ADS)
(ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) doesn't exist in Kconfig, therefore
remove all references to it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/68328serial.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index d8204f4ebbb40..7356a56ac458f 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -98,19 +98,13 @@ static void change_speed(struct m68k_serial *info);
* Setup for console. Argument comes from the boot command line.
*/
-#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ)
-#define CONSOLE_BAUD_RATE 115200
-#define DEFAULT_CBAUD B115200
-#else
- /* (es) */
- /* note: this is messy, but it works, again, perhaps defined somewhere else?*/
- #ifdef CONFIG_M68VZ328
- #define CONSOLE_BAUD_RATE 19200
- #define DEFAULT_CBAUD B19200
- #endif
- /* (/es) */
+/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
+#ifdef CONFIG_M68VZ328
+#define CONSOLE_BAUD_RATE 19200
+#define DEFAULT_CBAUD B19200
#endif
+
#ifndef CONSOLE_BAUD_RATE
#define CONSOLE_BAUD_RATE 9600
#define DEFAULT_CBAUD B9600
--
GitLab
From e847003f00d5eca3e3b3a6a1199f82b51293faf6 Mon Sep 17 00:00:00 2001
From: Lytochkin Boris <lytboris@gmail.com>
Date: Mon, 26 Jul 2010 10:02:26 +0400
Subject: [PATCH 699/863] serial: add support for OX16PCI958 card
Signed-off-by: Lytochkin Boris <lytboris@gmail.com>
Tested-by: Lytochkin Boris <lytboris@gmail.com>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/8250_pci.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 746a44621d915..53be4d35a0aa1 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -994,6 +994,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_TITAN_800E 0xA014
#define PCI_DEVICE_ID_TITAN_200EI 0xA016
#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
+#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1542,6 +1543,8 @@ enum pci_board_num_t {
pbn_b2_4_921600,
pbn_b2_8_921600,
+ pbn_b2_8_1152000,
+
pbn_b2_bt_1_115200,
pbn_b2_bt_2_115200,
pbn_b2_bt_4_115200,
@@ -1960,6 +1963,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.uart_offset = 8,
},
+ [pbn_b2_8_1152000] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 1152000,
+ .uart_offset = 8,
+ },
+
[pbn_b2_bt_1_115200] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 1,
@@ -2875,6 +2885,9 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+ PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+ pbn_b2_8_1152000 },
/*
* Oxford Semiconductor Inc. Tornado PCI express device range.
--
GitLab
From 464eb8f596fcbdadcfbbdb4a84847ffcb93cc4dd Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Fri, 23 Jul 2010 20:34:53 +0400
Subject: [PATCH 700/863] mxser: remove unnesesary NULL check
mxser_transmit_chars(tty, port) is called only from mxser_interrupt().
NULL check is performed in mxser_interrupt() so it is redundant here.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/mxser.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index d2692d443f7bf..3fc89da856ae9 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -2193,7 +2193,7 @@ static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port
port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
port->icount.tx += (cnt - port->xmit_cnt);
- if (port->xmit_cnt < WAKEUP_CHARS && tty)
+ if (port->xmit_cnt < WAKEUP_CHARS)
tty_wakeup(tty);
if (port->xmit_cnt <= 0) {
--
GitLab
From d843fc6e9dc9bee7061b6833594860ea93ad98e1 Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Tue, 27 Jul 2010 08:20:22 +0100
Subject: [PATCH 701/863] hsu: driver for Medfield High Speed UART device
This is a PCI & UART driver, which suppors both PIO and DMA mode
UART operation. It has 3 identical UART ports and one internal
DMA controller.
Current FW will export 4 pci devices for hsu: 3 uart ports and 1
dma controller, each has one IRQ line. And we need to discuss the
device model, one PCI device covering whole HSU should be a better
model, but there is a problem of how to export the 4 IRQs info
Current driver set the highest baud rate to 2746800bps, which is
easy to scale down to 115200/230400.... To suport higher baud rate,
we need add special process, change DLAB/DLH/PS/DIV/MUL registers
all together.
921600 is the highest baud rate that has been tested with Bluetooth
modem connected to HSU port 0. Will test more when there is right
BT firmware.
Current version contains several work around for A0's Silicon bugs
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/Kconfig | 10 +
drivers/serial/Makefile | 1 +
drivers/serial/mfd.c | 1488 +++++++++++++++++++++++++++++++++++
include/linux/serial_core.h | 2 +
include/linux/serial_mfd.h | 47 ++
include/linux/serial_reg.h | 16 +
6 files changed, 1564 insertions(+)
create mode 100644 drivers/serial/mfd.c
create mode 100644 include/linux/serial_mfd.h
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c34c217878b37..a22e60c06f486 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -724,6 +724,16 @@ config MRST_MAX3110_IRQ
help
This has to be enabled after Moorestown GPIO driver is loaded
+config SERIAL_MFD_HSU
+ tristate "Medfield High Speed UART support"
+ depends on PCI
+ select SERIAL_CORE
+
+config SERIAL_MFD_HSU_CONSOLE
+ boolean "Medfile HSU serial console support"
+ depends on SERIAL_MFD_HSU=y
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_BFIN
tristate "Blackfin serial port support"
depends on BLACKFIN
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 424067ac33478..1ca4fd599ffeb 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
+obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
new file mode 100644
index 0000000000000..300dcb134e075
--- /dev/null
+++ b/drivers/serial/mfd.c
@@ -0,0 +1,1488 @@
+/*
+ * mfd.c: driver for High Speed UART device of Intel Medfield platform
+ *
+ * Refer pxa.c, 8250.c and some other drivers in drivers/serial/
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+
+/* Notes:
+ * 1. there should be 2 types of register access method, one for
+ * UART ports, the other for the general purpose registers
+ *
+ * 2. It used to have a Irda port, but was defeatured recently
+ *
+ * 3. Based on the info from HSU MAS, 0/1 channel are assigned to
+ * port0, 2/3 chan to port 1, 4/5 chan to port 3. Even number
+ * chan will be read, odd chan for write
+ *
+ * 4. HUS supports both the 64B and 16B FIFO version, but this driver
+ * will only use 64B version
+ *
+ * 5. In A0 stepping, UART will not support TX half empty flag, thus
+ * need add a #ifdef judgement
+ *
+ * 6. One more bug for A0, the loopback mode won't support AFC
+ * auto-flow control
+ *
+ * 7. HSU has some special FCR control bits, we add it to serial_reg.h
+ *
+ * 8. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always asserted,
+ * only when the HW is reset the DDCD and DDSR will be triggered
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial_reg.h>
+#include <linux/circ_buf.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial_mfd.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#define MFD_HSU_A0_STEPPING 1
+
+#define HSU_DMA_BUF_SIZE 2048
+
+#define chan_readl(chan, offset) readl(chan->reg + offset)
+#define chan_writel(chan, offset, val) writel(val, chan->reg + offset)
+
+#define mfd_readl(obj, offset) readl(obj->reg + offset)
+#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset)
+
+struct hsu_dma_buffer {
+ u8 *buf;
+ dma_addr_t dma_addr;
+ u32 dma_size;
+ u32 ofs;
+};
+
+struct hsu_dma_chan {
+ u32 id;
+ u32 dirt; /* to or from device */
+ struct uart_hsu_port *uport;
+ void __iomem *reg;
+};
+
+struct uart_hsu_port {
+ struct uart_port port;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned int lsr_break_flag;
+ char name[12];
+ int index;
+ struct device *dev;
+
+ struct hsu_dma_chan *txc;
+ struct hsu_dma_chan *rxc;
+ struct hsu_dma_buffer txbuf;
+ struct hsu_dma_buffer rxbuf;
+ int use_dma; /* flag for DMA/PIO */
+ int running;
+ int dma_tx_on;
+};
+
+/* Top level data structure of HSU */
+struct hsu_port {
+ struct pci_device *pdev;
+
+ void __iomem *reg;
+ unsigned long paddr;
+ unsigned long iolen;
+ u32 irq;
+
+ struct uart_hsu_port port[3];
+ struct hsu_dma_chan chans[10];
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs;
+#endif
+};
+
+static inline void hexdump(char *str, u8 *addr, int cnt)
+{
+ int i;
+
+ for (i = 0; i < cnt; i += 8) {
+ printk("0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x",
+ addr[i], addr[i+1], addr[i+2], addr[i+3],
+ addr[i+4], addr[i+5], addr[i+6], addr[i+7]);
+ printk("\n");
+ }
+}
+
+static inline unsigned int serial_in(struct uart_hsu_port *up, int offset)
+{
+ unsigned int val;
+
+ if (offset > UART_MSR) {
+ offset <<= 2;
+ val = readl(up->port.membase + offset);
+ } else
+ val = (unsigned int)readb(up->port.membase + offset);
+
+ return val;
+}
+
+static inline void serial_out(struct uart_hsu_port *up, int offset, int value)
+{
+ if (offset > UART_MSR) {
+ offset <<= 2;
+ writel(value, up->port.membase + offset);
+ } else {
+ unsigned char val = value & 0xff;
+ writeb(val, up->port.membase + offset);
+ }
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#define HSU_REGS_BUFSIZE 1024
+
+static int hsu_show_regs_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t port_show_regs(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct uart_hsu_port *up = file->private_data;
+ char *buf;
+ u32 len = 0;
+ ssize_t ret;
+
+ buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ return 0;
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MFD HSU port[%d] regs:\n", up->index);
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "=================================\n");
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "IER: \t\t0x%08x\n", serial_in(up, UART_IER));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "PS: \t\t0x%08x\n", serial_in(up, UART_PS));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct hsu_dma_chan *chan = file->private_data;
+ char *buf;
+ u32 len = 0;
+ ssize_t ret;
+
+ buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ return 0;
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MFD HSU DMA channel [%d] regs:\n", chan->id);
+
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "=================================\n");
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR));
+ len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
+ "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations port_regs_ops = {
+ .owner = THIS_MODULE,
+ .open = hsu_show_regs_open,
+ .read = port_show_regs,
+};
+
+static const struct file_operations dma_regs_ops = {
+ .owner = THIS_MODULE,
+ .open = hsu_show_regs_open,
+ .read = dma_show_regs,
+};
+
+static int hsu_debugfs_init(struct hsu_port *hsu)
+{
+ int i;
+ char name[32];
+
+ hsu->debugfs = debugfs_create_dir("hsu", NULL);
+ if (!hsu->debugfs)
+ return -ENOMEM;
+
+ for (i = 0; i < 3; i++) {
+ snprintf(name, sizeof(name), "port_%d_regs", i);
+ debugfs_create_file(name, S_IFREG | S_IRUGO,
+ hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops);
+ }
+
+ for (i = 0; i < 6; i++) {
+ snprintf(name, sizeof(name), "dma_chan_%d_regs", i);
+ debugfs_create_file(name, S_IFREG | S_IRUGO,
+ hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops);
+ }
+
+ return 0;
+}
+
+static void hsu_debugfs_remove(struct hsu_port *hsu)
+{
+ if (hsu->debugfs)
+ debugfs_remove_recursive(hsu->debugfs);
+}
+
+#else
+static inline int hsu_debugfs_init(struct hsu_port *hsu)
+{
+ return 0;
+}
+
+static inline void hsu_debugfs_remove(struct hsu_port *hsu)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static void serial_hsu_enable_ms(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+void hsu_dma_tx(struct uart_hsu_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ struct hsu_dma_buffer *dbuf = &up->txbuf;
+ int count;
+
+ /* test_and_set_bit may be better, but anyway it's in lock protected mode */
+ if (up->dma_tx_on)
+ return;
+
+ /* Update the circ buf info */
+ xmit->tail += dbuf->ofs;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ up->port.icount.tx += dbuf->ofs;
+ dbuf->ofs = 0;
+
+ /* Disable the channel */
+ chan_writel(up->txc, HSU_CH_CR, 0x0);
+
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) {
+ dma_sync_single_for_device(up->port.dev,
+ dbuf->dma_addr,
+ dbuf->dma_size,
+ DMA_TO_DEVICE);
+
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ dbuf->ofs = count;
+
+ /* Reprogram the channel */
+ chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail);
+ chan_writel(up->txc, HSU_CH_D0TSR, count);
+
+ /* Reenable the channel */
+ chan_writel(up->txc, HSU_CH_DCR, 0x1
+ | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24));
+
+ WARN(chan_readl(up->txc, HSU_CH_CR) & 0x1,
+ "TX channel has already be started!!\n");
+ up->dma_tx_on = 1;
+ chan_writel(up->txc, HSU_CH_CR, 0x1);
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+}
+
+/* The buffer is already cache coherent */
+void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf)
+{
+ /* Need start RX dma channel here */
+ dbuf->ofs = 0;
+
+ chan_writel(rxc, HSU_CH_BSR, 32);
+ chan_writel(rxc, HSU_CH_MOTSR, 4);
+
+ chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr);
+ chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size);
+ chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24) /* timeout bit, see HSU Errata 1 */
+ );
+ chan_writel(rxc, HSU_CH_CR, 0x3);
+}
+
+/* Protected by spin_lock_irqsave(port->lock) */
+static void serial_hsu_start_tx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ if (up->use_dma) {
+ hsu_dma_tx(up);
+ } else if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serial_hsu_stop_tx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct hsu_dma_chan *txc = up->txc;
+
+ if (up->use_dma)
+ chan_writel(txc, HSU_CH_CR, 0x0);
+ else if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+/* This is always called in spinlock protected mode, so
+ * modify timeout timer is safe here */
+void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
+{
+ struct hsu_dma_buffer *dbuf = &up->rxbuf;
+ struct hsu_dma_chan *chan = up->rxc;
+ struct uart_port *port = &up->port;
+ struct tty_struct *tty = port->state->port.tty;
+ int count;
+
+ if (!tty)
+ return;
+
+ /*
+ * first need to know how many is already transferred,
+ * then check if its a timeout DMA irq, and return
+ * the trail bytes out, push them up and reenable the
+ * channel, better to use 2 descriptors at the same time
+ */
+
+ /* timeout IRQ, need wait some time, see Errata 2 */
+ if (int_sts & 0xf00)
+ udelay(2);
+
+ /* Stop the channel */
+ chan_writel(chan, HSU_CH_CR, 0x0);
+
+ /* We can use 2 ways to calc the actual transfer len */
+ count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
+
+ if (!count)
+ return;
+
+ dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
+ dbuf->dma_size, DMA_FROM_DEVICE);
+
+ /*
+ * head will only wrap around when we recycle
+ * the DMA buffer, and when that happens, we
+ * explicitly set tail to 0. So head will
+ * always be greater than tail.
+ */
+ tty_insert_flip_string(tty, dbuf->buf, count);
+ port->icount.rx += count;
+
+ dma_sync_single_for_device(up->port.dev, dbuf->dma_addr,
+ dbuf->dma_size, DMA_FROM_DEVICE);
+
+ /* Reprogram the channel */
+ chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr);
+ chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size);
+ chan_writel(chan, HSU_CH_DCR, 0x1
+ | (0x1 << 8)
+ | (0x1 << 16)
+ | (0x1 << 24) /* timeout bit, see HSU Errata 1 */
+ );
+ chan_writel(chan, HSU_CH_CR, 0x3);
+
+ tty_flip_buffer_push(tty);
+}
+
+static void serial_hsu_stop_rx(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct hsu_dma_chan *chan = up->rxc;
+
+ if (up->use_dma)
+ chan_writel(chan, HSU_CH_CR, 0x2);
+ else {
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+/*
+ * if there is error flag, should we just reset the FIFO or keeps
+ * working on it
+ */
+static inline void receive_chars(struct uart_hsu_port *up, int *status)
+{
+ struct tty_struct *tty = up->port.state->port.tty;
+ unsigned int ch, flag;
+ unsigned int max_count = 256;
+
+ if (!tty)
+ return;
+
+ do {
+ ch = serial_in(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+
+ dev_warn(up->dev, "We really rush into ERR/BI case"
+ "status = 0x%02x", *status);
+ /* For statistics only */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /* Mask off conditions which should be ignored. */
+ *status &= up->port.read_status_mask;
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+ if (up->port.cons &&
+ up->port.cons->index == up->port.line) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+#endif
+ if (*status & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ goto ignore_char;
+
+ uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+ ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && max_count--);
+ tty_flip_buffer_push(tty);
+}
+
+static void transmit_chars(struct uart_hsu_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+ int i = 0; /* for debug use */
+
+ if (up->port.x_char) {
+ serial_out(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial_hsu_stop_tx(&up->port);
+ return;
+ }
+
+#ifndef MFD_HSU_A0_STEPPING
+ count = up->port.fifosize / 2;
+#else
+ /*
+ * A0 only supports fully empty IRQ, and the first char written
+ * into it won't clear the EMPT bit, so we may need be cautious
+ * by useing a shorter buffer
+ */
+ /* count = up->port.fifosize; */
+ count = up->port.fifosize - 4;
+#endif
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ i++;
+
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ serial_hsu_stop_tx(&up->port);
+}
+
+static inline void check_modem_status(struct uart_hsu_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ /* We may only get DDCD when HW init and reset */
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ /* will start/stop_tx accordingly */
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static irqreturn_t port_irq(int irq, void *dev_id)
+{
+ struct uart_hsu_port *up = dev_id;
+ unsigned int iir, lsr;
+ unsigned long flags;
+
+ if (unlikely(!up->running))
+ return IRQ_NONE;
+
+ if (up->use_dma) {
+ lsr = serial_in(up, UART_LSR);
+ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE)))
+ dev_warn(up->dev,
+ "Got lsr irq while using DMA, lsr = 0x%2x\n",
+ lsr);
+ check_modem_status(up);
+ return IRQ_HANDLED;
+ }
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ iir = serial_in(up, UART_IIR);
+ if (iir & UART_IIR_NO_INT) {
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return IRQ_NONE;
+ }
+
+ lsr = serial_in(up, UART_LSR);
+
+ if (lsr & UART_LSR_DR)
+ receive_chars(up, &lsr);
+
+ /* lsr will be renewed during the receive_chars */
+ if (lsr & UART_LSR_THRE)
+ transmit_chars(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return IRQ_HANDLED;
+}
+
+static inline void dma_chan_irq(struct hsu_dma_chan *chan)
+{
+ struct uart_hsu_port *up = chan->uport;
+ unsigned long flags;
+ u32 int_sts;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ if (!up->use_dma || !up->running)
+ goto exit;
+
+ /*
+ * No matter what situation, need read clear the IRQ status
+ * There is a bug, see Errata 5, HSD 2900918
+ */
+ int_sts = chan_readl(chan, HSU_CH_SR);
+
+ /* Rx channel */
+ if (chan->dirt == DMA_FROM_DEVICE)
+ hsu_dma_rx(up, int_sts);
+
+ /* Tx channel */
+ if (chan->dirt == DMA_TO_DEVICE) {
+ /* dma for irq should be done */
+ chan_writel(chan, HSU_CH_CR, 0x0);
+ up->dma_tx_on = 0;
+ hsu_dma_tx(up);
+ }
+
+exit:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return;
+}
+
+static irqreturn_t dma_irq(int irq, void *dev_id)
+{
+ struct hsu_port *hsu = dev_id;
+ u32 int_sts, i;
+
+ int_sts = mfd_readl(hsu, HSU_GBL_DMAISR);
+
+ /* Currently we only have 6 channels may be used */
+ for (i = 0; i < 6; i++) {
+ if (int_sts & 0x1)
+ dma_chan_irq(&hsu->chans[i]);
+ int_sts >>= 1;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int serial_hsu_tx_empty(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial_hsu_get_mctrl(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned char status;
+ unsigned int ret;
+
+ status = serial_in(up, UART_MSR);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr |= up->mcr;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * What special to do:
+ * 1. chose the 64B fifo mode
+ * 2. make sure not to select half empty mode for A0 stepping
+ * 3. start dma or pio depends on configuration
+ * 4. we only allocate dma memory when needed
+ */
+static int serial_hsu_startup(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+
+ /* Clear the interrupt registers. */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ /* Now, initialize the UART, default is 8n1 */
+ serial_out(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->port.mctrl |= TIOCM_OUT2;
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ if (!up->use_dma)
+ up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE;
+ else
+ up->ier = 0;
+ serial_out(up, UART_IER, up->ier);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* DMA init */
+ /* When use DMA, TX/RX's FIFO and IRQ should be disabled */
+ if (up->use_dma) {
+ struct hsu_dma_buffer *dbuf;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ up->dma_tx_on = 0;
+
+ /* First allocate the RX buffer */
+ dbuf = &up->rxbuf;
+ dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL);
+ if (!dbuf->buf) {
+ up->use_dma = 0;
+ goto exit;
+ }
+ dbuf->dma_addr = dma_map_single(port->dev,
+ dbuf->buf,
+ HSU_DMA_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ dbuf->dma_size = HSU_DMA_BUF_SIZE;
+
+ /* Start the RX channel right now */
+ hsu_dma_start_rx_chan(up->rxc, dbuf);
+
+ /* Next init the TX DMA */
+ dbuf = &up->txbuf;
+ dbuf->buf = xmit->buf;
+ dbuf->dma_addr = dma_map_single(port->dev,
+ dbuf->buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ dbuf->dma_size = UART_XMIT_SIZE;
+
+ /* This should not be changed all around */
+ chan_writel(up->txc, HSU_CH_BSR, 32);
+ chan_writel(up->txc, HSU_CH_MOTSR, 4);
+ dbuf->ofs = 0;
+ }
+
+exit:
+ /* And clear the interrupt registers again for luck. */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ up->running = 1;
+ return 0;
+}
+
+static void serial_hsu_shutdown(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ unsigned long flags;
+
+ /* Disable interrupts from this port */
+ up->ier = 0;
+ serial_out(up, UART_IER, 0);
+ up->running = 0;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl &= ~TIOCM_OUT2;
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* Disable break condition and FIFOs */
+ serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+}
+
+static void
+serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ struct tty_struct *tty = port->state->port.tty;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+ u32 mul = 0x3600;
+ u32 ps = 0x10;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ /* CMSPAR isn't supported by this driver */
+ if (tty)
+ tty->termios->c_cflag &= ~CMSPAR;
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+
+ /*
+ * For those basic low baud rate we can get the direct
+ * scalar from 2746800, like 115200 = 2746800/24, for those
+ * higher baud rate, we have to handle them case by case,
+ * but DIV reg is never touched as its default value 0x3d09
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+ quot = uart_get_divisor(port, baud);
+
+ switch (baud) {
+ case 3500000:
+ mul = 0x3345;
+ ps = 0xC;
+ quot = 1;
+ break;
+ case 2500000:
+ mul = 0x2710;
+ ps = 0x10;
+ quot = 1;
+ break;
+ case 18432000:
+ mul = 0x2400;
+ ps = 0x10;
+ quot = 1;
+ break;
+ case 1500000:
+ mul = 0x1D4C;
+ ps = 0xc;
+ quot = 1;
+ break;
+ default:
+ ;
+ }
+
+ if ((up->port.uartclk / quot) < (2400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B;
+ else if ((up->port.uartclk / quot) < (230400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B;
+
+ fcr |= UART_FCR_HSU_64B_FIFO;
+#ifdef MFD_HSU_A0_STEPPING
+ /* A0 doesn't support half empty IRQ */
+ fcr |= UART_FCR_FULL_EMPT_TXI;
+#endif
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* Update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /* Characters to ignore */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts, disable
+ * MSI by default
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE | UART_MCR_RTS;
+ else
+ up->mcr &= ~UART_MCR_AFE;
+
+ serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
+ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_out(up, UART_LCR, cval); /* reset DLAB */
+ serial_out(up, UART_MUL, mul); /* set MUL */
+ serial_out(up, UART_PS, ps); /* set PS */
+ up->lcr = cval; /* Save LCR */
+ serial_hsu_set_mctrl(&up->port, up->port.mctrl);
+ serial_out(up, UART_FCR, fcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial_hsu_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+}
+
+static void serial_hsu_release_port(struct uart_port *port)
+{
+}
+
+static int serial_hsu_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_hsu_config_port(struct uart_port *port, int flags)
+{
+#if 0
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ up->port.type = PORT_MFD;
+#endif
+}
+
+static int
+serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* We don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+static const char *
+serial_hsu_type(struct uart_port *port)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+ return up->name;
+}
+
+/* Mainly for uart console use */
+static struct uart_hsu_port *serial_hsu_ports[3];
+static struct uart_driver serial_hsu_reg;
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/* Wait for transmitter & holding register to empty */
+static inline void wait_for_xmitr(struct uart_hsu_port *up)
+{
+ unsigned int status, tmout = 1000;
+
+ /* Wait up to 1ms for the character to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (!(status & BOTH_EMPTY));
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ udelay(1);
+ }
+}
+
+static void serial_hsu_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_hsu_port *up =
+ container_of(port, struct uart_hsu_port, port);
+
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial_hsu_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_hsu_port *up = serial_hsu_ports[co->index];
+ unsigned long flags;
+ unsigned int ier;
+ int locked = 1;
+
+ local_irq_save(flags);
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
+ } else
+ spin_lock(&up->port.lock);
+
+ /* First save the IER then disable the interrupts */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+
+ uart_console_write(&up->port, s, count, serial_hsu_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+}
+
+static struct console serial_hsu_console;
+
+static int __init
+serial_hsu_console_setup(struct console *co, char *options)
+{
+ struct uart_hsu_port *up;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ if (co->index == -1 || co->index >= serial_hsu_reg.nr)
+ co->index = 0;
+ up = serial_hsu_ports[co->index];
+ if (!up)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ ret = uart_set_options(&up->port, co, baud, parity, bits, flow);
+
+ return ret;
+}
+
+static struct console serial_hsu_console = {
+ .name = "ttyMFD",
+ .write = serial_hsu_console_write,
+ .device = uart_console_device,
+ .setup = serial_hsu_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = 2,
+ .data = &serial_hsu_reg,
+};
+#endif
+
+struct uart_ops serial_hsu_pops = {
+ .tx_empty = serial_hsu_tx_empty,
+ .set_mctrl = serial_hsu_set_mctrl,
+ .get_mctrl = serial_hsu_get_mctrl,
+ .stop_tx = serial_hsu_stop_tx,
+ .start_tx = serial_hsu_start_tx,
+ .stop_rx = serial_hsu_stop_rx,
+ .enable_ms = serial_hsu_enable_ms,
+ .break_ctl = serial_hsu_break_ctl,
+ .startup = serial_hsu_startup,
+ .shutdown = serial_hsu_shutdown,
+ .set_termios = serial_hsu_set_termios,
+ .pm = serial_hsu_pm,
+ .type = serial_hsu_type,
+ .release_port = serial_hsu_release_port,
+ .request_port = serial_hsu_request_port,
+ .config_port = serial_hsu_config_port,
+ .verify_port = serial_hsu_verify_port,
+};
+
+static struct uart_driver serial_hsu_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "MFD serial",
+ .dev_name = "ttyMFD",
+ .major = TTY_MAJOR,
+ .minor = 128,
+ .nr = 3,
+};
+
+#ifdef CONFIG_PM
+static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct uart_hsu_port *up;
+
+ up = pci_get_drvdata(pdev);
+ if (!up)
+ return 0;
+
+ uart_suspend_port(&serial_hsu_reg, &up->port);
+
+ return 0;
+}
+
+static int serial_hsu_resume(struct pci_dev *pdev)
+{
+ struct uart_hsu_port *up;
+
+ up = pci_get_drvdata(pdev);
+ if (!up)
+ return 0;
+ uart_resume_port(&serial_hsu_reg, &up->port);
+ return 0;
+}
+#else
+#define serial_hsu_suspend NULL
+#define serial_hsu_resume NULL
+#endif
+
+/* temp global pointer before we settle down on using one or four PCI dev */
+static struct hsu_port *phsu;
+
+static int serial_hsu_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct uart_hsu_port *uport;
+ int index, ret;
+
+ printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n",
+ pdev->vendor, pdev->device);
+
+ switch (pdev->device) {
+ case 0x081B:
+ index = 0;
+ break;
+ case 0x081C:
+ index = 1;
+ break;
+ case 0x081D:
+ index = 2;
+ break;
+ case 0x081E:
+ /* internal DMA controller */
+ index = 3;
+ break;
+ default:
+ dev_err(&pdev->dev, "HSU: out of index!");
+ return -ENODEV;
+ }
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ if (index == 3) {
+ /* DMA controller */
+ ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get IRQ\n");
+ goto err_disable;
+ }
+ pci_set_drvdata(pdev, phsu);
+ } else {
+ /* UART port 0~2 */
+ uport = &phsu->port[index];
+ uport->port.irq = pdev->irq;
+ uport->port.dev = &pdev->dev;
+ uport->dev = &pdev->dev;
+
+ ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get IRQ\n");
+ goto err_disable;
+ }
+ uart_add_one_port(&serial_hsu_reg, &uport->port);
+
+#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
+ if (index == 2) {
+ register_console(&serial_hsu_console);
+ uport->port.cons = &serial_hsu_console;
+ }
+#endif
+ pci_set_drvdata(pdev, uport);
+ }
+
+ return 0;
+
+err_disable:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void hsu_global_init(void)
+{
+ struct hsu_port *hsu;
+ struct uart_hsu_port *uport;
+ struct hsu_dma_chan *dchan;
+ int i, ret;
+
+ hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL);
+ if (!hsu)
+ return;
+
+ /* Get basic io resource and map it */
+ hsu->paddr = 0xffa28000;
+ hsu->iolen = 0x1000;
+
+ if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global")))
+ pr_warning("HSU: error in request mem region\n");
+
+ hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen);
+ if (!hsu->reg) {
+ pr_err("HSU: error in ioremap\n");
+ ret = -ENOMEM;
+ goto err_free_region;
+ }
+
+ /* Initialise the 3 UART ports */
+ uport = hsu->port;
+ for (i = 0; i < 3; i++) {
+ uport->port.type = PORT_MFD;
+ uport->port.iotype = UPIO_MEM;
+ uport->port.mapbase = (resource_size_t)hsu->paddr
+ + HSU_PORT_REG_OFFSET
+ + i * HSU_PORT_REG_LENGTH;
+ uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET
+ + i * HSU_PORT_REG_LENGTH;
+
+ sprintf(uport->name, "hsu_port%d", i);
+ uport->port.fifosize = 64;
+ uport->port.ops = &serial_hsu_pops;
+ uport->port.line = i;
+ uport->port.flags = UPF_IOREMAP;
+ /* make the maxim support rate to 2746800 bps */
+ uport->port.uartclk = 115200 * 24 * 16;
+
+ uport->running = 0;
+ uport->txc = &hsu->chans[i * 2];
+ uport->rxc = &hsu->chans[i * 2 + 1];
+
+ serial_hsu_ports[i] = uport;
+ uport->index = i;
+ uport++;
+ }
+
+ /* Initialise 6 dma channels */
+ dchan = hsu->chans;
+ for (i = 0; i < 6; i++) {
+ dchan->id = i;
+ dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ dchan->uport = &hsu->port[i/2];
+ dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
+ i * HSU_DMA_CHANS_REG_LENGTH;
+ dchan++;
+ }
+
+ phsu = hsu;
+
+ hsu_debugfs_init(hsu);
+ return;
+
+err_free_region:
+ release_mem_region(hsu->paddr, hsu->iolen);
+ kfree(hsu);
+ return;
+}
+
+static void serial_hsu_remove(struct pci_dev *pdev)
+{
+ struct hsu_port *hsu;
+ int i;
+
+ hsu = pci_get_drvdata(pdev);
+ if (!hsu)
+ return;
+
+ for (i = 0; i < 3; i++)
+ uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port);
+
+ pci_set_drvdata(pdev, NULL);
+ free_irq(hsu->irq, hsu);
+ pci_disable_device(pdev);
+}
+
+/* First 3 are UART ports, and the 4th is the DMA */
+static const struct pci_device_id pci_ids[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) },
+ {},
+};
+
+static struct pci_driver hsu_pci_driver = {
+ .name = "HSU serial",
+ .id_table = pci_ids,
+ .probe = serial_hsu_probe,
+ .remove = __devexit_p(serial_hsu_remove),
+ .suspend = serial_hsu_suspend,
+ .resume = serial_hsu_resume,
+};
+
+static int __init hsu_pci_init(void)
+{
+ int ret;
+
+ hsu_global_init();
+
+ ret = uart_register_driver(&serial_hsu_reg);
+ if (ret)
+ return ret;
+
+ return pci_register_driver(&hsu_pci_driver);
+}
+
+static void __exit hsu_pci_exit(void)
+{
+ pci_unregister_driver(&hsu_pci_driver);
+ uart_unregister_driver(&serial_hsu_reg);
+
+ hsu_debugfs_remove(phsu);
+
+ kfree(phsu);
+}
+
+module_init(hsu_pci_init);
+module_exit(hsu_pci_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:medfield-hsu");
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 9ddc866ccc09c..f8fce351463dc 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -189,6 +189,8 @@
/* MAX3107 */
#define PORT_MAX3107 94
+/* High Speed UART for Medfield */
+#define PORT_MFD 95
#ifdef __KERNEL__
diff --git a/include/linux/serial_mfd.h b/include/linux/serial_mfd.h
new file mode 100644
index 0000000000000..2b071e0b034d6
--- /dev/null
+++ b/include/linux/serial_mfd.h
@@ -0,0 +1,47 @@
+#ifndef _SERIAL_MFD_H_
+#define _SERIAL_MFD_H_
+
+/* HW register offset definition */
+#define UART_FOR 0x08
+#define UART_PS 0x0C
+#define UART_MUL 0x0D
+#define UART_DIV 0x0E
+
+#define HSU_GBL_IEN 0x0
+#define HSU_GBL_IST 0x4
+
+#define HSU_GBL_INT_BIT_PORT0 0x0
+#define HSU_GBL_INT_BIT_PORT1 0x1
+#define HSU_GBL_INT_BIT_PORT2 0x2
+#define HSU_GBL_INT_BIT_IRI 0x3
+#define HSU_GBL_INT_BIT_HDLC 0x4
+#define HSU_GBL_INT_BIT_DMA 0x5
+
+#define HSU_GBL_ISR 0x8
+#define HSU_GBL_DMASR 0x400
+#define HSU_GBL_DMAISR 0x404
+
+#define HSU_PORT_REG_OFFSET 0x80
+#define HSU_PORT0_REG_OFFSET 0x80
+#define HSU_PORT1_REG_OFFSET 0x100
+#define HSU_PORT2_REG_OFFSET 0x180
+#define HSU_PORT_REG_LENGTH 0x80
+
+#define HSU_DMA_CHANS_REG_OFFSET 0x500
+#define HSU_DMA_CHANS_REG_LENGTH 0x40
+
+#define HSU_CH_SR 0x0 /* channel status reg */
+#define HSU_CH_CR 0x4 /* control reg */
+#define HSU_CH_DCR 0x8 /* descriptor control reg */
+#define HSU_CH_BSR 0x10 /* max fifo buffer size reg */
+#define HSU_CH_MOTSR 0x14 /* minimum ocp transfer size */
+#define HSU_CH_D0SAR 0x20 /* desc 0 start addr */
+#define HSU_CH_D0TSR 0x24 /* desc 0 transfer size */
+#define HSU_CH_D1SAR 0x28
+#define HSU_CH_D1TSR 0x2C
+#define HSU_CH_D2SAR 0x30
+#define HSU_CH_D2TSR 0x34
+#define HSU_CH_D3SAR 0x38
+#define HSU_CH_D3TSR 0x3C
+
+#endif
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index cf9327c051adb..c7a0ce11cd47b 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -221,8 +221,24 @@
#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */
#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */
+/*
+ * Intel MID on-chip HSU (High Speed UART) defined bits
+ */
+#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */
+#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */
+#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */
+
+#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */
+#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */
+#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */
+#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */
+#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */
+#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */
+#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */
/*
* These register definitions are for the 16C950
--
GitLab
From 669b7a0938e759097c150400cd36bd49befaf5bb Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Tue, 27 Jul 2010 08:20:32 +0100
Subject: [PATCH 702/863] hsu: add a periodic timer to check dma rx channel
A general problem for uart rx dma channel is you never know when
and how much data will be received, so usually preset it a DMA
descriptor with a big size, and rely on DMA RX timeout IRQ to
know there is some data in rx channel.
For a RX data size of multiple of MOTSR, there will be no timeout
IRQ issued, thus OS will never be notified about that.
This is a work around for that, current timer frequency is 5 times
per second, it should vary according to the baud rate
When future silicon version fix the problem, this workaround need
be removed
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/mfd.c | 50 +++++++++++++++++++++++++++++++++++++++++---
1 file changed, 47 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 300dcb134e075..ed2bf6b14a4ac 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -64,6 +64,8 @@
#define mfd_readl(obj, offset) readl(obj->reg + offset)
#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset)
+#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10)
+
struct hsu_dma_buffer {
u8 *buf;
dma_addr_t dma_addr;
@@ -75,7 +77,8 @@ struct hsu_dma_chan {
u32 id;
u32 dirt; /* to or from device */
struct uart_hsu_port *uport;
- void __iomem *reg;
+ void __iomem *reg;
+ struct timer_list rx_timer; /* only needed by RX channel */
};
struct uart_hsu_port {
@@ -377,6 +380,8 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf
| (0x1 << 24) /* timeout bit, see HSU Errata 1 */
);
chan_writel(rxc, HSU_CH_CR, 0x3);
+
+ mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
}
/* Protected by spin_lock_irqsave(port->lock) */
@@ -437,8 +442,13 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
/* We can use 2 ways to calc the actual transfer len */
count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
- if (!count)
+ if (!count) {
+ /* restart the channel before we leave */
+ chan_writel(chan, HSU_CH_CR, 0x3);
return;
+ }
+
+ del_timer(&chan->rx_timer);
dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
dbuf->dma_size, DMA_FROM_DEVICE);
@@ -463,9 +473,12 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
| (0x1 << 16)
| (0x1 << 24) /* timeout bit, see HSU Errata 1 */
);
+ tty_flip_buffer_push(tty);
+
chan_writel(chan, HSU_CH_CR, 0x3);
+ chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
+ add_timer(&chan->rx_timer);
- tty_flip_buffer_push(tty);
}
static void serial_hsu_stop_rx(struct uart_port *port)
@@ -893,6 +906,8 @@ static void serial_hsu_shutdown(struct uart_port *port)
container_of(port, struct uart_hsu_port, port);
unsigned long flags;
+ del_timer_sync(&up->rxc->rx_timer);
+
/* Disable interrupts from this port */
up->ier = 0;
serial_out(up, UART_IER, 0);
@@ -1348,6 +1363,28 @@ static int serial_hsu_probe(struct pci_dev *pdev,
return ret;
}
+static void hsu_dma_rx_timeout(unsigned long data)
+{
+ struct hsu_dma_chan *chan = (void *)data;
+ struct uart_hsu_port *up = chan->uport;
+ struct hsu_dma_buffer *dbuf = &up->rxbuf;
+ int count = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
+
+ if (!count) {
+ mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
+ goto exit;
+ }
+
+ hsu_dma_rx(up, 0);
+exit:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
static void hsu_global_init(void)
{
struct hsu_port *hsu;
@@ -1409,6 +1446,13 @@ static void hsu_global_init(void)
dchan->uport = &hsu->port[i/2];
dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
i * HSU_DMA_CHANS_REG_LENGTH;
+
+ /* Work around for RX */
+ if (dchan->dirt == DMA_FROM_DEVICE) {
+ init_timer(&dchan->rx_timer);
+ dchan->rx_timer.function = hsu_dma_rx_timeout;
+ dchan->rx_timer.data = (unsigned long)dchan;
+ }
dchan++;
}
--
GitLab
From 06c77e21ae7c199435097116b8212b0761fc8ba8 Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Tue, 27 Jul 2010 08:20:42 +0100
Subject: [PATCH 703/863] hsu: some code cleanup
Major changes are:
* refine the comments in the driver
* remove unused member from structure "hsu_port"
* extended spin_lock protoction for dma mode in port_irq()
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/mfd.c | 85 ++++++++++----------------------------------
1 file changed, 19 insertions(+), 66 deletions(-)
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index ed2bf6b14a4ac..f5e7569c1773d 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -3,7 +3,7 @@
*
* Refer pxa.c, 8250.c and some other drivers in drivers/serial/
*
- * (C) Copyright 2009 Intel Corporation
+ * (C) Copyright 2010 Intel Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -11,30 +11,16 @@
* of the License.
*/
-
/* Notes:
- * 1. there should be 2 types of register access method, one for
- * UART ports, the other for the general purpose registers
- *
- * 2. It used to have a Irda port, but was defeatured recently
- *
- * 3. Based on the info from HSU MAS, 0/1 channel are assigned to
- * port0, 2/3 chan to port 1, 4/5 chan to port 3. Even number
- * chan will be read, odd chan for write
- *
- * 4. HUS supports both the 64B and 16B FIFO version, but this driver
- * will only use 64B version
+ * 1. DMA channel allocation: 0/1 channel are assigned to port 0,
+ * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans
+ * are used for RX, odd chans for TX
*
- * 5. In A0 stepping, UART will not support TX half empty flag, thus
- * need add a #ifdef judgement
+ * 2. In A0 stepping, UART will not support TX half empty flag
*
- * 6. One more bug for A0, the loopback mode won't support AFC
- * auto-flow control
- *
- * 7. HSU has some special FCR control bits, we add it to serial_reg.h
- *
- * 8. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always asserted,
- * only when the HW is reset the DDCD and DDSR will be triggered
+ * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * asserted, only when the HW is reset the DDCD and DDSR will
+ * be triggered
*/
#include <linux/module.h>
@@ -75,7 +61,7 @@ struct hsu_dma_buffer {
struct hsu_dma_chan {
u32 id;
- u32 dirt; /* to or from device */
+ enum dma_data_direction dirt;
struct uart_hsu_port *uport;
void __iomem *reg;
struct timer_list rx_timer; /* only needed by RX channel */
@@ -102,8 +88,6 @@ struct uart_hsu_port {
/* Top level data structure of HSU */
struct hsu_port {
- struct pci_device *pdev;
-
void __iomem *reg;
unsigned long paddr;
unsigned long iolen;
@@ -112,23 +96,9 @@ struct hsu_port {
struct uart_hsu_port port[3];
struct hsu_dma_chan chans[10];
-#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs;
-#endif
};
-static inline void hexdump(char *str, u8 *addr, int cnt)
-{
- int i;
-
- for (i = 0; i < cnt; i += 8) {
- printk("0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x",
- addr[i], addr[i+1], addr[i+2], addr[i+3],
- addr[i+4], addr[i+5], addr[i+6], addr[i+7]);
- printk("\n");
- }
-}
-
static inline unsigned int serial_in(struct uart_hsu_port *up, int offset)
{
unsigned int val;
@@ -353,9 +323,6 @@ void hsu_dma_tx(struct uart_hsu_port *up)
| (0x1 << 8)
| (0x1 << 16)
| (0x1 << 24));
-
- WARN(chan_readl(up->txc, HSU_CH_CR) & 0x1,
- "TX channel has already be started!!\n");
up->dma_tx_on = 1;
chan_writel(up->txc, HSU_CH_CR, 0x1);
}
@@ -367,7 +334,6 @@ void hsu_dma_tx(struct uart_hsu_port *up)
/* The buffer is already cache coherent */
void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf)
{
- /* Need start RX dma channel here */
dbuf->ofs = 0;
chan_writel(rxc, HSU_CH_BSR, 32);
@@ -426,35 +392,32 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
return;
/*
- * first need to know how many is already transferred,
+ * First need to know how many is already transferred,
* then check if its a timeout DMA irq, and return
* the trail bytes out, push them up and reenable the
- * channel, better to use 2 descriptors at the same time
+ * channel
*/
- /* timeout IRQ, need wait some time, see Errata 2 */
+ /* Timeout IRQ, need wait some time, see Errata 2 */
if (int_sts & 0xf00)
udelay(2);
/* Stop the channel */
chan_writel(chan, HSU_CH_CR, 0x0);
- /* We can use 2 ways to calc the actual transfer len */
count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
-
if (!count) {
- /* restart the channel before we leave */
+ /* Restart the channel before we leave */
chan_writel(chan, HSU_CH_CR, 0x3);
return;
}
-
del_timer(&chan->rx_timer);
dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
dbuf->dma_size, DMA_FROM_DEVICE);
/*
- * head will only wrap around when we recycle
+ * Head will only wrap around when we recycle
* the DMA buffer, and when that happens, we
* explicitly set tail to 0. So head will
* always be greater than tail.
@@ -496,10 +459,6 @@ static void serial_hsu_stop_rx(struct uart_port *port)
}
}
-/*
- * if there is error flag, should we just reset the FIFO or keeps
- * working on it
- */
static inline void receive_chars(struct uart_hsu_port *up, int *status)
{
struct tty_struct *tty = up->port.state->port.tty;
@@ -571,7 +530,6 @@ static void transmit_chars(struct uart_hsu_port *up)
{
struct circ_buf *xmit = &up->port.state->xmit;
int count;
- int i = 0; /* for debug use */
if (up->port.x_char) {
serial_out(up, UART_TX, up->port.x_char);
@@ -592,13 +550,11 @@ static void transmit_chars(struct uart_hsu_port *up)
* into it won't clear the EMPT bit, so we may need be cautious
* by useing a shorter buffer
*/
- /* count = up->port.fifosize; */
count = up->port.fifosize - 4;
#endif
do {
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- i++;
up->port.icount.tx++;
if (uart_circ_empty(xmit))
@@ -628,7 +584,7 @@ static inline void check_modem_status(struct uart_hsu_port *up)
/* We may only get DDCD when HW init and reset */
if (status & UART_MSR_DDCD)
uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
- /* will start/stop_tx accordingly */
+ /* Will start/stop_tx accordingly */
if (status & UART_MSR_DCTS)
uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
@@ -647,6 +603,7 @@ static irqreturn_t port_irq(int irq, void *dev_id)
if (unlikely(!up->running))
return IRQ_NONE;
+ spin_lock_irqsave(&up->port.lock, flags);
if (up->use_dma) {
lsr = serial_in(up, UART_LSR);
if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
@@ -655,10 +612,10 @@ static irqreturn_t port_irq(int irq, void *dev_id)
"Got lsr irq while using DMA, lsr = 0x%2x\n",
lsr);
check_modem_status(up);
+ spin_unlock_irqrestore(&up->port.lock, flags);
return IRQ_HANDLED;
}
- spin_lock_irqsave(&up->port.lock, flags);
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT) {
spin_unlock_irqrestore(&up->port.lock, flags);
@@ -666,9 +623,9 @@ static irqreturn_t port_irq(int irq, void *dev_id)
}
lsr = serial_in(up, UART_LSR);
-
if (lsr & UART_LSR_DR)
receive_chars(up, &lsr);
+ check_modem_status(up);
/* lsr will be renewed during the receive_chars */
if (lsr & UART_LSR_THRE)
@@ -701,7 +658,6 @@ static inline void dma_chan_irq(struct hsu_dma_chan *chan)
/* Tx channel */
if (chan->dirt == DMA_TO_DEVICE) {
- /* dma for irq should be done */
chan_writel(chan, HSU_CH_CR, 0x0);
up->dma_tx_on = 0;
hsu_dma_tx(up);
@@ -851,7 +807,6 @@ static int serial_hsu_startup(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
/* DMA init */
- /* When use DMA, TX/RX's FIFO and IRQ should be disabled */
if (up->use_dma) {
struct hsu_dma_buffer *dbuf;
struct circ_buf *xmit = &port->state->xmit;
@@ -1090,11 +1045,9 @@ static int serial_hsu_request_port(struct uart_port *port)
static void serial_hsu_config_port(struct uart_port *port, int flags)
{
-#if 0
struct uart_hsu_port *up =
container_of(port, struct uart_hsu_port, port);
up->port.type = PORT_MFD;
-#endif
}
static int
@@ -1426,7 +1379,7 @@ static void hsu_global_init(void)
uport->port.ops = &serial_hsu_pops;
uport->port.line = i;
uport->port.flags = UPF_IOREMAP;
- /* make the maxim support rate to 2746800 bps */
+ /* set the scalable maxim support rate to 2746800 bps */
uport->port.uartclk = 115200 * 24 * 16;
uport->running = 0;
--
GitLab
From 3c4108c82f7769fcd265dc77a5bb0c6d8bcea25f Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Tue, 27 Jul 2010 08:20:52 +0100
Subject: [PATCH 704/863] hsu: call PCI pm hooks in suspend/resume function
Also add check for dma controller or the uart ports.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/mfd.c | 31 ++++++++++++++++++++++---------
1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index f5e7569c1773d..bc9af503907f4 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -1217,25 +1217,38 @@ static struct uart_driver serial_hsu_reg = {
#ifdef CONFIG_PM
static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state)
{
+ void *priv = pci_get_drvdata(pdev);
struct uart_hsu_port *up;
- up = pci_get_drvdata(pdev);
- if (!up)
- return 0;
-
- uart_suspend_port(&serial_hsu_reg, &up->port);
+ /* Make sure this is not the internal dma controller */
+ if (priv && (pdev->device != 0x081E)) {
+ up = priv;
+ uart_suspend_port(&serial_hsu_reg, &up->port);
+ }
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int serial_hsu_resume(struct pci_dev *pdev)
{
+ void *priv = pci_get_drvdata(pdev);
struct uart_hsu_port *up;
+ int ret;
- up = pci_get_drvdata(pdev);
- if (!up)
- return 0;
- uart_resume_port(&serial_hsu_reg, &up->port);
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ dev_warn(&pdev->dev,
+ "HSU: can't re-enable device, try to continue\n");
+
+ if (priv && (pdev->device != 0x081E)) {
+ up = priv;
+ uart_resume_port(&serial_hsu_reg, &up->port);
+ }
return 0;
}
#else
--
GitLab
From e38018be3e7c03dd7e8f4ab0e1d55407cebbf89d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 27 Jul 2010 08:16:05 +0100
Subject: [PATCH 705/863] serial: max3107: Fix gpiolib support
Because of the way gpiolib works we actually need to ifdef this in our
header file
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/max3107.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h
index 72b30415f4179..7ab6323925026 100644
--- a/drivers/serial/max3107.h
+++ b/drivers/serial/max3107.h
@@ -368,8 +368,10 @@ struct max3107_port {
/* SPI device structure */
struct spi_device *spi;
+#if defined(CONFIG_GPIOLIB)
/* GPIO chip stucture */
struct gpio_chip chip;
+#endif
/* Workqueue that does all the magic */
struct workqueue_struct *workqueue;
--
GitLab
From ee78bb95b7bea08b7774a02073ea2bb45611a9e1 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 29 Jul 2010 11:09:47 +0200
Subject: [PATCH 706/863] Char: nozomi, fix tty->count counting
Currently ntty_install omits to increment tty count and we get the
following warnings:
Warning: dev (noz2) tty->count(0) != #fd's(1) in tty_open
So to fix that, add one tty->count++ there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org> [.34, .35]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/nozomi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index a6638003f530f..21ae1b158b3b5 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1611,6 +1611,7 @@ static int ntty_install(struct tty_driver *driver, struct tty_struct *tty)
ret = tty_init_termios(tty);
if (ret == 0) {
tty_driver_kref_get(driver);
+ tty->count++;
driver->ttys[tty->index] = tty;
}
return ret;
--
GitLab
From bf9c1fca9ae9a79ed209e7ab2c10b3862f3f6f72 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 29 Jul 2010 11:46:32 +0200
Subject: [PATCH 707/863] Char: nozomi, set tty->driver_data appropriately
Sorry, one more fix, this one depends on the other, so this is rather 2/2.
--
tty->driver_data is used all over the code, but never set. This
results in oopses like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000130
IP: [<ffffffff814a0040>] mutex_lock+0x10/0x40
...
Pid: 2157, comm: modem-manager Not tainted 2.6.34.1-0.1-desktop #1 2768DR7/2768DR7
RIP: 0010:[<ffffffff814a0040>] [<ffffffff814a0040>] mutex_lock+0x10/0x40
RSP: 0018:ffff88007b16fa50 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000130 RCX: 0000000000000003
RDX: 0000000000000003 RSI: 0000000000000286 RDI: 0000000000000130
RBP: 0000000000001000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000130
R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007b16feb4
...
Call Trace:
[<ffffffffa077690d>] ntty_write_room+0x4d/0x90 [nozomi]
...
Set tty->driver_data to the computed port in .install to not recompute it in
every place where needed. Switch .open to use driver_data too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org> [.34, .35]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/nozomi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 21ae1b158b3b5..18af923093c33 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1612,6 +1612,7 @@ static int ntty_install(struct tty_driver *driver, struct tty_struct *tty)
if (ret == 0) {
tty_driver_kref_get(driver);
tty->count++;
+ tty->driver_data = port;
driver->ttys[tty->index] = tty;
}
return ret;
@@ -1640,7 +1641,7 @@ static int ntty_activate(struct tty_port *tport, struct tty_struct *tty)
static int ntty_open(struct tty_struct *tty, struct file *filp)
{
- struct port *port = get_port_by_tty(tty);
+ struct port *port = tty->driver_data;
return tty_port_open(&port->port, tty, filp);
}
--
GitLab
From 235dae5d094c415fcf0fc79fa637f1901bc8afe2 Mon Sep 17 00:00:00 2001
From: Philippe Langlais <philippe.langlais@stericsson.com>
Date: Thu, 29 Jul 2010 17:13:57 +0200
Subject: [PATCH 708/863] U6715 16550A serial driver support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
UART Features extract from STEricsson U6715 data-sheet (arm926 SoC for mobile phone):
* Fully compatible with industry standard 16C550 and 16C450 from various
manufacturers
* RX and TX 64 byte FIFO reduces CPU interrupts
* Full double buffering
* Modem control signals include CTS, RTS, (and DSR, DTR on UART1 only)
* Automatic baud rate selection
* Manual or automatic RTS/CTS smart hardware flow control
* Programmable serial characteristics:
– Baud rate generation (50 to 3.25M baud)
– 5, 6, 7 or 8-bit characters
– Even, odd or no-parity bit generation and detection
– 1, 1.5 or 2 stop bit generation
* Independent control of transmit, receive, line status, data set interrupts and FIFOs
* Full status-reporting capabilities
* Separate DMA signaling for RX and TX
* Timed interrupt to spread receive interrupt on known duration
* DMA time-out interrupt to allow detection of end of reception
* Carkit pulse coding and decoding compliant with USB carkit control interface [40]
In 16550A auto-configuration, if the fifo size is 64 then it's an U6 16550A port
Add set_termios hook & export serial8250_do_set_termios to change uart
clock following baudrate
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/8250.c | 37 ++++++++++++++++++++++++++++++++++---
include/linux/serial.h | 3 ++-
include/linux/serial_8250.h | 5 +++++
include/linux/serial_core.h | 3 +++
4 files changed, 44 insertions(+), 4 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 355148dc085eb..24110f6f61e0e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -300,6 +300,13 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
+ [PORT_U6_16550A] = {
+ .name = "U6_16550A",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
#if defined(CONFIG_MIPS_ALCHEMY)
@@ -1070,6 +1077,15 @@ static void autoconfig_16550a(struct uart_8250_port *up)
DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
}
serial_outp(up, UART_IER, iersave);
+
+ /*
+ * We distinguish between 16550A and U6 16550A by counting
+ * how many bytes are in the FIFO.
+ */
+ if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
+ up->port.type = PORT_U6_16550A;
+ up->capabilities |= UART_CAP_AFE;
+ }
}
/*
@@ -2224,9 +2240,9 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
return quot;
}
-static void
-serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned char cval, fcr = 0;
@@ -2402,6 +2418,17 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
}
+EXPORT_SYMBOL(serial8250_do_set_termios);
+
+static void
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ if (port->set_termios)
+ port->set_termios(port, termios, old);
+ else
+ serial8250_do_set_termios(port, termios, old);
+}
static void
serial8250_set_ldisc(struct uart_port *port, int new)
@@ -2982,6 +3009,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.type = p->type;
port.serial_in = p->serial_in;
port.serial_out = p->serial_out;
+ port.set_termios = p->set_termios;
port.dev = &dev->dev;
port.irqflags |= irqflag;
ret = serial8250_register_port(&port);
@@ -3145,6 +3173,9 @@ int serial8250_register_port(struct uart_port *port)
uart->port.serial_in = port->serial_in;
if (port->serial_out)
uart->port.serial_out = port->serial_out;
+ /* Possibly override set_termios call */
+ if (port->set_termios)
+ uart->port.set_termios = port->set_termios;
ret = uart_add_one_port(&serial8250_reg, &uart->port);
if (ret == 0)
diff --git a/include/linux/serial.h b/include/linux/serial.h
index ef914061511ec..1ebc694a6d521 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -77,7 +77,8 @@ struct serial_struct {
#define PORT_16654 11
#define PORT_16850 12
#define PORT_RSA 13 /* RSA-DV II/S card */
-#define PORT_MAX 13
+#define PORT_U6_16550A 14
+#define PORT_MAX 14
#define SERIAL_IO_PORT 0
#define SERIAL_IO_HUB6 1
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index fb46aba11fb5a..7638deaaba653 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -32,6 +32,9 @@ struct plat_serial8250_port {
unsigned int type; /* If UPF_FIXED_TYPE */
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
+ void (*set_termios)(struct uart_port *,
+ struct ktermios *new,
+ struct ktermios *old);
};
/*
@@ -71,5 +74,7 @@ extern int early_serial_setup(struct uart_port *port);
extern int serial8250_find_port(struct uart_port *p);
extern int serial8250_find_port_for_earlycon(void);
extern int setup_early_serial8250_console(char *cmdline);
+extern void serial8250_do_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old);
#endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f8fce351463dc..8129ca2d57e39 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -282,6 +282,9 @@ struct uart_port {
unsigned char __iomem *membase; /* read/write[bwl] */
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
+ void (*set_termios)(struct uart_port *,
+ struct ktermios *new,
+ struct ktermios *old);
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
--
GitLab
From 96e077ae347912dfce0e93f5958efc3ed6f311f4 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 9 Jun 2010 17:34:05 -0400
Subject: [PATCH 709/863] USB: fix failure path in usb_add_hcd()
This patch (as1389) fixes some errors in the failure pathway of
usb_add_hcd(). The actions it takes ought to be exactly the same as
those taken by usb_remove_hcd(), but they aren't.
In one case (removal of the usb_bus_attr_group), the two routines are
brought into agreement by changing usb_remove_hcd(). All the other
discrepancies are fixed by changing usb_add_hcd().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 12742f152f431..caae4625a1f1f 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2229,7 +2229,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
rhdev->speed = USB_SPEED_SUPER;
break;
default:
- goto err_allocate_root_hub;
+ goto err_set_rh_speed;
}
hcd->self.root_hub = rhdev;
@@ -2305,16 +2305,29 @@ int usb_add_hcd(struct usb_hcd *hcd,
return retval;
error_create_attr_group:
+ if (HC_IS_RUNNING(hcd->state))
+ hcd->state = HC_STATE_QUIESCING;
+ spin_lock_irq(&hcd_root_hub_lock);
+ hcd->rh_registered = 0;
+ spin_unlock_irq(&hcd_root_hub_lock);
+
+#ifdef CONFIG_USB_SUSPEND
+ cancel_work_sync(&hcd->wakeup_work);
+#endif
mutex_lock(&usb_bus_list_lock);
usb_disconnect(&hcd->self.root_hub);
mutex_unlock(&usb_bus_list_lock);
err_register_root_hub:
hcd->driver->stop(hcd);
+ hcd->state = HC_STATE_HALT;
+ hcd->poll_rh = 0;
+ del_timer_sync(&hcd->rh_timer);
err_hcd_driver_start:
if (hcd->irq >= 0)
free_irq(irqnum, hcd);
err_request_irq:
err_hcd_driver_setup:
+err_set_rh_speed:
hcd->self.root_hub = NULL;
usb_put_dev(rhdev);
err_allocate_root_hub:
@@ -2337,6 +2350,8 @@ void usb_remove_hcd(struct usb_hcd *hcd)
{
dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
+ sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
+
if (HC_IS_RUNNING (hcd->state))
hcd->state = HC_STATE_QUIESCING;
@@ -2349,7 +2364,6 @@ void usb_remove_hcd(struct usb_hcd *hcd)
cancel_work_sync(&hcd->wakeup_work);
#endif
- sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
mutex_lock(&usb_bus_list_lock);
usb_disconnect(&hcd->self.root_hub);
mutex_unlock(&usb_bus_list_lock);
--
GitLab
From 6d88e6792574497bfac9a81403cc47712040636f Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 9 Jun 2010 17:34:17 -0400
Subject: [PATCH 710/863] USB: don't stop root-hub status polls too soon
This patch (as1390) fixes a problem that crops up when a UHCI host
controller is unbound from uhci-hcd while there are still some active
URBs. The URBs have to be unlinked when the root hub is unregistered,
and uhci-hcd relies upon root-hub status polls as part of its
unlinking procedure. But usb_hcd_poll_rh_status() won't make those
status calls if hcd->rh_registered is clear, and the flag is cleared
_before_ the unregistration takes place.
Since hcd->rh_registered is used for other things and needs to be
cleared early, the solution is to add a new flag (rh_pollable) and use
it instead. It gets cleared _after_ the root hub is unregistered.
Now that the status polls don't end too soon, we have to make sure
they also don't occur too late -- after the root hub's usb_device
structure or the HCD's private structures are deallocated. Therefore
the patch adds usb_get_device() and usb_put_device() calls to protect
the root hub structure, and it adds an extra del_timer_sync() to
prevent the root-hub timer from causing an unexpected status poll.
This additional complexity would not be needed if the HCD framework
had provided separate stop() and release() callbacks instead of just
stop(). This lack could be fixed at some future time (although it
would require changes to every host controller driver); when that
happens this patch won't be needed any more.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd.c | 32 +++++++++++++++++++++++++-------
include/linux/usb/hcd.h | 1 +
2 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index caae4625a1f1f..53f14c82ff2e4 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -667,7 +667,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
unsigned long flags;
char buffer[6]; /* Any root hubs with > 31 ports? */
- if (unlikely(!hcd->rh_registered))
+ if (unlikely(!hcd->rh_pollable))
return;
if (!hcd->uses_new_polling && !hcd->status_urb)
return;
@@ -2217,6 +2217,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
retval = -ENOMEM;
goto err_allocate_root_hub;
}
+ hcd->self.root_hub = rhdev;
switch (hcd->driver->flags & HCD_MASK) {
case HCD_USB11:
@@ -2231,7 +2232,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
default:
goto err_set_rh_speed;
}
- hcd->self.root_hub = rhdev;
/* wakeup flag init defaults to "everything works" for root hubs,
* but drivers can override it in reset() if needed, along with
@@ -2246,6 +2246,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
dev_err(hcd->self.controller, "can't setup\n");
goto err_hcd_driver_setup;
}
+ hcd->rh_pollable = 1;
/* NOTE: root hub and controller capabilities may not be the same */
if (device_can_wakeup(hcd->self.controller)
@@ -2315,9 +2316,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
cancel_work_sync(&hcd->wakeup_work);
#endif
mutex_lock(&usb_bus_list_lock);
- usb_disconnect(&hcd->self.root_hub);
+ usb_disconnect(&rhdev); /* Sets rhdev to NULL */
mutex_unlock(&usb_bus_list_lock);
err_register_root_hub:
+ hcd->rh_pollable = 0;
+ hcd->poll_rh = 0;
+ del_timer_sync(&hcd->rh_timer);
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
hcd->poll_rh = 0;
@@ -2328,8 +2332,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
err_request_irq:
err_hcd_driver_setup:
err_set_rh_speed:
- hcd->self.root_hub = NULL;
- usb_put_dev(rhdev);
+ usb_put_dev(hcd->self.root_hub);
err_allocate_root_hub:
usb_deregister_bus(&hcd->self);
err_register_bus:
@@ -2348,9 +2351,12 @@ EXPORT_SYMBOL_GPL(usb_add_hcd);
*/
void usb_remove_hcd(struct usb_hcd *hcd)
{
+ struct usb_device *rhdev = hcd->self.root_hub;
+
dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
- sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
+ usb_get_dev(rhdev);
+ sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
if (HC_IS_RUNNING (hcd->state))
hcd->state = HC_STATE_QUIESCING;
@@ -2365,17 +2371,29 @@ void usb_remove_hcd(struct usb_hcd *hcd)
#endif
mutex_lock(&usb_bus_list_lock);
- usb_disconnect(&hcd->self.root_hub);
+ usb_disconnect(&rhdev); /* Sets rhdev to NULL */
mutex_unlock(&usb_bus_list_lock);
+ /* Prevent any more root-hub status calls from the timer.
+ * The HCD might still restart the timer (if a port status change
+ * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
+ * the hub_status_data() callback.
+ */
+ hcd->rh_pollable = 0;
+ hcd->poll_rh = 0;
+ del_timer_sync(&hcd->rh_timer);
+
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
+ /* In case the HCD restarted the timer, stop it again. */
hcd->poll_rh = 0;
del_timer_sync(&hcd->rh_timer);
if (hcd->irq >= 0)
free_irq(hcd->irq, hcd);
+
+ usb_put_dev(hcd->self.root_hub);
usb_deregister_bus(&hcd->self);
hcd_buffer_destroy(hcd);
}
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 2e3a4ea1a3da7..11b6381959014 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -95,6 +95,7 @@ struct usb_hcd {
#define HCD_FLAG_SAW_IRQ 0x00000002
unsigned rh_registered:1;/* is root hub registered? */
+ unsigned rh_pollable:1; /* may we poll the root hub? */
/* The next flag is a stopgap, to be removed when all the HCDs
* support the new root-hub polling mechanism. */
--
GitLab
From c548795abe0d3520b74e18f23ca0a0d72deddab9 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 9 Jun 2010 17:34:27 -0400
Subject: [PATCH 711/863] USB: add check to detect host controller hardware
removal
This patch (as1391) fixes a problem that can occur when USB host
controller hardware is hot-unplugged. If no interrupts are generated
by the unplug then the HCD may not realize that the controller is
gone, and the subsequent unbind may hang waiting for interrupts that
never arrive.
The solution (for PCI-based controllers) is to call the HCD's
interrupt handler at the start of usb_hcd_pci_remove(). If the
hardware is gone, the handler will realize this when it tries to read
the controller's status register.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd-pci.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 1cf2d1e79a5c2..7e2d5271b0c97 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -292,6 +292,14 @@ void usb_hcd_pci_remove(struct pci_dev *dev)
if (!hcd)
return;
+ /* Fake an interrupt request in order to give the driver a chance
+ * to test whether the controller hardware has been removed (e.g.,
+ * cardbus physical eject).
+ */
+ local_irq_disable();
+ usb_hcd_irq(0, hcd);
+ local_irq_enable();
+
usb_remove_hcd(hcd);
if (hcd->driver->flags & HCD_MEMORY) {
iounmap(hcd->regs);
--
GitLab
From ba297edde4dd7376832bafb23e032a40d5928b56 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 9 Jun 2010 17:34:39 -0400
Subject: [PATCH 712/863] USB: UHCI: acquire spinlock before calling start_rh()
This patch (as1392) fixes a bug in uhci-hcd: The start_rh() routine is
supposed to be called with the private spinlock held. If an IRQ comes
in at just the wrong time, the driver will think the controller has
died when in fact it simply hasn't start yet.
The patch also addresses some issues that may prevent an URB from
being unlinked after the controller has stopped. This is an abnormal
occurrence (ordinarily the controller stops only when the entire bus
is suspended and hence there are no active URBs), so the pathways
haven't gotten much testing. These two changes may be a little more
than is strictly necessary, but clearly they won't hurt.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/uhci-hcd.c | 2 ++
drivers/usb/host/uhci-q.c | 4 ++--
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 6637e52736dda..d1dce2166eff5 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -691,7 +691,9 @@ static int uhci_start(struct usb_hcd *hcd)
configure_hc(uhci);
uhci->is_initialized = 1;
+ spin_lock_irq(&uhci->lock);
start_rh(uhci);
+ spin_unlock_irq(&uhci->lock);
return 0;
/*
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index acd582c028020..d3ade40184871 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -565,7 +565,7 @@ static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
qh->unlink_frame = uhci->frame_number;
/* Force an interrupt so we know when the QH is fully unlinked */
- if (list_empty(&uhci->skel_unlink_qh->node))
+ if (list_empty(&uhci->skel_unlink_qh->node) || uhci->is_stopped)
uhci_set_next_interrupt(uhci);
/* Move the QH from its old list to the end of the unlinking list */
@@ -1667,7 +1667,7 @@ static int uhci_advance_check(struct uhci_hcd *uhci, struct uhci_qh *qh)
qh->advance_jiffies = jiffies;
goto done;
}
- ret = 0;
+ ret = uhci->is_stopped;
}
/* The queue hasn't advanced; check for timeout */
--
GitLab
From 6c4b7f70ba5ffb7fa1d19d2518664ea6ddb3cbf3 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Wed, 9 Jun 2010 20:22:03 +0200
Subject: [PATCH 713/863] USB: speedtouch: fixed brace and spacing coding style
issues
Fixed brace coding style issues.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/atm/speedtch.c | 4 +++-
drivers/usb/atm/usbatm.c | 9 +++------
2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 80f9617d3a151..db83468bde5cd 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -753,7 +753,9 @@ static struct usb_driver speedtch_usb_driver = {
.id_table = speedtch_usb_ids
};
-static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_interfaces) {
+static void speedtch_release_interfaces(struct usb_device *usb_dev,
+ int num_interfaces)
+{
struct usb_interface *cur_intf;
int i;
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 9b53e8df46481..a67166e5f6718 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -273,8 +273,7 @@ static void usbatm_complete(struct urb *urb)
if (unlikely(status) &&
(!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
- status != -EILSEQ ))
- {
+ status != -EILSEQ )) {
if (status == -ESHUTDOWN)
return;
@@ -516,8 +515,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance,
target[3] |= 0x2; /* adjust PTI */
ctrl->len = 0; /* tag this skb finished */
- }
- else
+ } else
ctrl->crc = crc32_be(ctrl->crc, ptr, left);
}
@@ -1390,9 +1388,8 @@ static int usbatm_print_packet(const unsigned char *data, int len)
for (i = 0; i < len;) {
buffer[0] = '\0';
sprintf(buffer, "%.3d :", i);
- for (j = 0; (j < 16) && (i < len); j++, i++) {
+ for (j = 0; (j < 16) && (i < len); j++, i++)
sprintf(buffer, "%s %2.2x", buffer, data[i]);
- }
dbg("%s", buffer);
}
return i;
--
GitLab
From 9196cc7bb46bece079398c9846050e8c8dc9235c Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Wed, 9 Jun 2010 20:43:03 +0200
Subject: [PATCH 714/863] USB: speedtouch: fixed more brace and spacing coding
style issues
Fixed spacing coding style issues.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/atm/speedtch.c | 6 +++---
drivers/usb/atm/usbatm.c | 16 ++++++++--------
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index db83468bde5cd..4716e707de59c 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -759,7 +759,7 @@ static void speedtch_release_interfaces(struct usb_device *usb_dev,
struct usb_interface *cur_intf;
int i;
- for(i = 0; i < num_interfaces; i++)
+ for (i = 0; i < num_interfaces; i++)
if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) {
usb_set_intfdata(cur_intf, NULL);
usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
@@ -794,7 +794,7 @@ static int speedtch_bind(struct usbatm_data *usbatm,
/* claim all interfaces */
- for (i=0; i < num_interfaces; i++) {
+ for (i = 0; i < num_interfaces; i++) {
cur_intf = usb_ifnum_to_if(usb_dev, i);
if ((i != ifnum) && cur_intf) {
@@ -844,7 +844,7 @@ static int speedtch_bind(struct usbatm_data *usbatm,
use_isoc = 0; /* fall back to bulk if endpoint not found */
- for (i=0; i<desc->desc.bNumEndpoints; i++) {
+ for (i = 0; i < desc->desc.bNumEndpoints; i++) {
const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
if ((endpoint_desc->bEndpointAddress == target_address)) {
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index a67166e5f6718..05bf5a27b5b04 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -84,8 +84,8 @@
#ifdef VERBOSE_DEBUG
static int usbatm_print_packet(const unsigned char *data, int len);
-#define PACKETDEBUG(arg...) usbatm_print_packet (arg)
-#define vdbg(arg...) dbg (arg)
+#define PACKETDEBUG(arg...) usbatm_print_packet(arg)
+#define vdbg(arg...) dbg(arg)
#else
#define PACKETDEBUG(arg...)
#define vdbg(arg...)
@@ -273,7 +273,7 @@ static void usbatm_complete(struct urb *urb)
if (unlikely(status) &&
(!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
- status != -EILSEQ )) {
+ status != -EILSEQ)) {
if (status == -ESHUTDOWN)
return;
@@ -493,7 +493,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance,
ptr += data_len;
__skb_pull(skb, data_len);
- if(!left)
+ if (!left)
continue;
memset(ptr, 0, left);
@@ -505,7 +505,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance,
trailer[2] = ctrl->len >> 8;
trailer[3] = ctrl->len;
- ctrl->crc = ~ crc32_be(ctrl->crc, ptr, left - 4);
+ ctrl->crc = ~crc32_be(ctrl->crc, ptr, left - 4);
trailer[4] = ctrl->crc >> 24;
trailer[5] = ctrl->crc >> 16;
@@ -1144,7 +1144,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out);
/* tx buffer size must be a positive multiple of the stride */
- instance->tx_channel.buf_size = max (instance->tx_channel.stride,
+ instance->tx_channel.buf_size = max(instance->tx_channel.stride,
snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride));
/* rx buffer size must be a positive multiple of the endpoint maxpacket */
@@ -1157,7 +1157,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
goto fail_unbind;
}
- num_packets = max (1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
+ num_packets = max(1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE)
num_packets--;
@@ -1260,7 +1260,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
usb_free_urb(instance->urbs[i]);
}
- kfree (instance);
+ kfree(instance);
return error;
}
--
GitLab
From 202380d913d4bf219fdb070b90368cf0275e7b06 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Mon, 7 Jun 2010 09:11:33 -0700
Subject: [PATCH 715/863] USB: xhci: Remove obsolete debugging printk.
When code to manipulate the command register was refactored from
xhci_run() to xhci_start(), a debugging statement was left behind that no
longer applies. Remove that statement.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3998f72cd0c4b..343f1047f5d08 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -495,7 +495,6 @@ int xhci_run(struct usb_hcd *hcd)
return -ENODEV;
}
- xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
if (doorbell)
(*doorbell)(xhci);
if (xhci->quirks & XHCI_NEC_HOST)
--
GitLab
From 89b54397909dd1d76737b65f682d2aae0781a33c Mon Sep 17 00:00:00 2001
From: James Courtier-Dutton <James@superbug.co.uk>
Date: Fri, 21 May 2010 11:53:25 +0100
Subject: [PATCH 716/863] USB: iuu_phoenix: Add support for different baud
rates.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/iuu_phoenix.c | 54 ++++++++++++++++++++++++--------
1 file changed, 41 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 74551cb2e8ee0..efc72113216b2 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1,6 +1,8 @@
/*
* Infinity Unlimited USB Phoenix driver
*
+ * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk)
+
* Copyright (C) 2007 Alain Degreffe (eczema@ecze.com)
*
* Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás)
@@ -40,7 +42,7 @@ static int debug;
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.11"
+#define DRIVER_VERSION "v0.12"
#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
static const struct usb_device_id id_table[] = {
@@ -81,6 +83,9 @@ struct iuu_private {
u8 *dbgbuf; /* debug buffer */
u8 len;
int vcc; /* vcc (either 3 or 5 V) */
+ u32 baud;
+ u32 boost;
+ u32 clk;
};
@@ -157,13 +162,14 @@ static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
port->number, set, clear);
spin_lock_irqsave(&priv->lock, flags);
- if (set & TIOCM_RTS)
- priv->tiostatus = TIOCM_RTS;
- if (!(set & TIOCM_RTS) && priv->tiostatus == TIOCM_RTS) {
+ if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) {
dbg("%s TIOCMSET RESET called !!!", __func__);
priv->reset = 1;
}
+ if (set & TIOCM_RTS)
+ priv->tiostatus = TIOCM_RTS;
+
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
@@ -851,20 +857,24 @@ static int iuu_uart_off(struct usb_serial_port *port)
return status;
}
-static int iuu_uart_baud(struct usb_serial_port *port, u32 baud,
+static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base,
u32 *actual, u8 parity)
{
int status;
+ u32 baud;
u8 *dataout;
u8 DataCount = 0;
u8 T1Frekvens = 0;
u8 T1reload = 0;
unsigned int T1FrekvensHZ = 0;
+ dbg("%s - enter baud_base=%d", __func__, baud_base);
dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL);
if (!dataout)
return -ENOMEM;
+ /*baud = (((priv->clk / 35) * baud_base) / 100000); */
+ baud = baud_base;
if (baud < 1200 || baud > 230400) {
kfree(dataout);
@@ -948,15 +958,20 @@ static void iuu_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
const u32 supported_mask = CMSPAR|PARENB|PARODD;
-
+ struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned int cflag = tty->termios->c_cflag;
int status;
u32 actual;
u32 parity;
int csize = CS7;
- int baud = 9600; /* Fixed for the moment */
+ int baud;
u32 newval = cflag & supported_mask;
+ /* Just use the ospeed. ispeed should be the same. */
+ baud = tty->termios->c_ospeed;
+
+ dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
+
/* compute the parity parameter */
parity = 0;
if (cflag & CMSPAR) { /* Using mark space */
@@ -976,15 +991,15 @@ static void iuu_set_termios(struct tty_struct *tty,
/* set it */
status = iuu_uart_baud(port,
- (clockmode == 2) ? 16457 : 9600 * boost / 100,
+ baud * priv->boost / 100,
&actual, parity);
/* set the termios value to the real one, so the user now what has
* changed. We support few fields so its easies to copy the old hw
* settings back over and then adjust them
*/
- if (old_termios)
- tty_termios_copy_hw(tty->termios, old_termios);
+ if (old_termios)
+ tty_termios_copy_hw(tty->termios, old_termios);
if (status != 0) /* Set failed - return old bits */
return;
/* Re-encode speed, parity and csize */
@@ -1018,6 +1033,7 @@ static void iuu_close(struct usb_serial_port *port)
static void iuu_init_termios(struct tty_struct *tty)
{
+ dbg("%s - enter", __func__);
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
| TIOCM_CTS | CSTOPB | PARENB;
@@ -1033,10 +1049,16 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
struct usb_serial *serial = port->serial;
u8 *buf;
int result;
+ int baud;
u32 actual;
struct iuu_private *priv = usb_get_serial_port_data(port);
- dbg("%s - port %d", __func__, port->number);
+ baud = tty->termios->c_ospeed;
+ tty->termios->c_ispeed = baud;
+ /* Re-encode speed */
+ tty_encode_baud_rate(tty, baud, baud);
+
+ dbg("%s - port %d, baud %d", __func__, port->number, baud);
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
@@ -1071,23 +1093,29 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
iuu_uart_on(port);
if (boost < 100)
boost = 100;
+ priv->boost = boost;
+ priv->baud = baud;
switch (clockmode) {
case 2: /* 3.680 Mhz */
+ priv->clk = IUU_CLK_3680000;
iuu_clk(port, IUU_CLK_3680000 * boost / 100);
result =
- iuu_uart_baud(port, 9600 * boost / 100, &actual,
+ iuu_uart_baud(port, baud * boost / 100, &actual,
IUU_PARITY_EVEN);
break;
case 3: /* 6.00 Mhz */
iuu_clk(port, IUU_CLK_6000000 * boost / 100);
+ priv->clk = IUU_CLK_6000000;
+ /* Ratio of 6000000 to 3500000 for baud 9600 */
result =
iuu_uart_baud(port, 16457 * boost / 100, &actual,
IUU_PARITY_EVEN);
break;
default: /* 3.579 Mhz */
iuu_clk(port, IUU_CLK_3579000 * boost / 100);
+ priv->clk = IUU_CLK_3579000;
result =
- iuu_uart_baud(port, 9600 * boost / 100, &actual,
+ iuu_uart_baud(port, baud * boost / 100, &actual,
IUU_PARITY_EVEN);
}
--
GitLab
From 37cd681c022a0a46ebcff025897a57457d3ca8cd Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 21 May 2010 17:08:21 -0400
Subject: [PATCH 717/863] USB: EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default
to Y
This patch (as1382) changes the USB_EHCI_TT_NEWSCHED Kconfig option to
be non-experimental and to default to Y. This option has existed for
a long time, and I have not heard any complaints concerning it. By
contrast, several people have reported that their devices could be
made to work only by enabling the option.
The point of changing the default is to cause the option to be enabled
by distros that simply use the default settings for esoteric things
like this.
This change was motivated by Bugzilla #15649.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/Kconfig | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index f865be2276d42..2d926cec0725f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -72,8 +72,9 @@ config USB_EHCI_ROOT_HUB_TT
from ARC, and has since changed hands a few times.
config USB_EHCI_TT_NEWSCHED
- bool "Improved Transaction Translator scheduling (EXPERIMENTAL)"
- depends on USB_EHCI_HCD && EXPERIMENTAL
+ bool "Improved Transaction Translator scheduling"
+ depends on USB_EHCI_HCD
+ default y
---help---
This changes the periodic scheduling code to fill more of the low
and full speed bandwidth available from the Transaction Translator
@@ -84,9 +85,11 @@ config USB_EHCI_TT_NEWSCHED
If you have multiple periodic low/fullspeed devices connected to a
highspeed USB hub which is connected to a highspeed USB Host
Controller, and some of those devices will not work correctly
- (possibly due to "ENOSPC" or "-28" errors), say Y.
+ (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
+ you have only one such device and it doesn't work, you could try
+ saying N.
- If unsure, say N.
+ If unsure, say Y.
config USB_EHCI_BIG_ENDIAN_MMIO
bool
--
GitLab
From be8a058b50a90282d32aa638720195e1c327c569 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 22 May 2010 10:26:22 +0200
Subject: [PATCH 718/863] USB: gadget: Use memdup_user
Use memdup_user when user data is immediately copied into the
allocated region.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@
- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+ to = memdup_user(from,size);
if (
- to==NULL
+ IS_ERR(to)
|| ...) {
<+... when != goto l1;
- -ENOMEM
+ PTR_ERR(to)
...+>
}
- if (copy_from_user(to, from, size) != 0) {
- <+... when != goto l2;
- -EFAULT
- ...+>
- }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/inode.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index de8a838035050..63fc171c0ed97 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1867,13 +1867,9 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
buf += 4;
length -= 4;
- kbuf = kmalloc (length, GFP_KERNEL);
- if (!kbuf)
- return -ENOMEM;
- if (copy_from_user (kbuf, buf, length)) {
- kfree (kbuf);
- return -EFAULT;
- }
+ kbuf = memdup_user(buf, length);
+ if (IS_ERR(kbuf))
+ return PTR_ERR(kbuf);
spin_lock_irq (&dev->lock);
value = -EINVAL;
--
GitLab
From 254217d1a86f80981e6dfc54d7412931c6f6e80b Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sun, 23 May 2010 21:56:41 +0200
Subject: [PATCH 719/863] USB: Documentation/usb/ehci.txt: Checkpatch cleanup
Documentation/usb/ehci.txt:12: ERROR: trailing whitespace
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
Documentation/usb/ehci.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/usb/ehci.txt b/Documentation/usb/ehci.txt
index 1536b7e751340..9dcafa7d930df 100644
--- a/Documentation/usb/ehci.txt
+++ b/Documentation/usb/ehci.txt
@@ -9,7 +9,7 @@ compatible with the USB 1.1 standard. It defines three transfer speeds:
- "Low Speed" 1.5 Mbit/sec
USB 1.1 only addressed full speed and low speed. High speed devices
-can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
+can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
USB 1.1 devices may also be used on USB 2.0 systems. When plugged
into an EHCI controller, they are given to a USB 1.1 "companion"
--
GitLab
From b03dbffdcf7903ae3f1e2d61887462301752d060 Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sun, 23 May 2010 21:56:42 +0200
Subject: [PATCH 720/863] USB: Documentation/usb/hotplug.txt: Checkpatch
cleanup
Documentation/usb/hotplug.txt:13: ERROR: trailing whitespace
Documentation/usb/hotplug.txt:87: ERROR: trailing whitespace
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
Documentation/usb/hotplug.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt
index f53170665f37d..4c945716a660d 100644
--- a/Documentation/usb/hotplug.txt
+++ b/Documentation/usb/hotplug.txt
@@ -10,7 +10,7 @@ immediately usable. That means the system must do many things, including:
- Bind a driver to that device. Bus frameworks do that using a
device driver's probe() routine.
-
+
- Tell other subsystems to configure the new device. Print
queues may need to be enabled, networks brought up, disk
partitions mounted, and so on. In some cases these will
@@ -84,7 +84,7 @@ USB MODUTILS SUPPORT
Current versions of module-init-tools will create a "modules.usbmap" file
which contains the entries from each driver's MODULE_DEVICE_TABLE. Such
files can be used by various user mode policy agents to make sure all the
-right driver modules get loaded, either at boot time or later.
+right driver modules get loaded, either at boot time or later.
See <linux/usb.h> for full information about such table entries; or look
at existing drivers. Each table entry describes one or more criteria to
--
GitLab
From e9c64f2b39d6861d5f3108ec135966349fc66adb Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sun, 23 May 2010 21:56:43 +0200
Subject: [PATCH 721/863] USB: Documentation/usb/linux.inf: Checkpatch cleanup
Documentation/usb/linux.inf:66: ERROR: trailing whitespace
Documentation/usb/linux.inf:67: ERROR: trailing whitespace
Documentation/usb/linux.inf:98: ERROR: trailing whitespace
Documentation/usb/linux.inf:99: ERROR: trailing whitespace
Documentation/usb/linux.inf:115: ERROR: trailing whitespace
Documentation/usb/linux.inf:116: ERROR: trailing whitespace
Documentation/usb/linux.inf:120: ERROR: trailing whitespace
Documentation/usb/linux.inf:121: ERROR: trailing whitespace
Documentation/usb/linux.inf:122: ERROR: trailing whitespace
Documentation/usb/linux.inf:123: ERROR: trailing whitespace
Documentation/usb/linux.inf:144: ERROR: trailing whitespace
Documentation/usb/linux.inf:145: ERROR: trailing whitespace
Documentation/usb/linux.inf:146: ERROR: trailing whitespace
Documentation/usb/linux.inf:147: ERROR: trailing whitespace
Documentation/usb/linux.inf:158: ERROR: trailing whitespace
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
Documentation/usb/linux.inf | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf
index af71d87d9e942..ebd02be803244 100644
--- a/Documentation/usb/linux.inf
+++ b/Documentation/usb/linux.inf
@@ -63,8 +63,8 @@ HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
CopyFiles=RNDIS_CopyFiles_98
[RNDIS_CopyFiles_98]
-usb8023.sys, usb8023w.sys, , 0
-rndismp.sys, rndismpw.sys, , 0
+usb8023.sys, usb8023w.sys, , 0
+rndismp.sys, rndismpw.sys, , 0
; Windows Millennium Edition specific sections --------------------
@@ -95,8 +95,8 @@ HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
CopyFiles=RNDIS_CopyFiles_ME
[RNDIS_CopyFiles_ME]
-usb8023.sys, usb8023m.sys, , 0
-rndismp.sys, rndismpm.sys, , 0
+usb8023.sys, usb8023m.sys, , 0
+rndismp.sys, rndismpm.sys, , 0
; Windows 2000 specific sections ---------------------------------
@@ -112,15 +112,15 @@ AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
[RNDIS_CopyFiles_NT]
; no rename of files on Windows 2000, use the 'k' names as is
-usb8023k.sys, , , 0
-rndismpk.sys, , , 0
+usb8023k.sys, , , 0
+rndismpk.sys, , , 0
[RNDIS_ServiceInst_NT]
DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023k.sys
+ServiceType = 1
+StartType = 3
+ErrorControl = 1
+ServiceBinary = %12%\usb8023k.sys
LoadOrderGroup = NDIS
AddReg = RNDIS_WMI_AddReg_NT
@@ -141,10 +141,10 @@ AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
[RNDIS_ServiceInst_51]
DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023.sys
+ServiceType = 1
+StartType = 3
+ErrorControl = 1
+ServiceBinary = %12%\usb8023.sys
LoadOrderGroup = NDIS
AddReg = RNDIS_WMI_AddReg_51
@@ -155,7 +155,7 @@ HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
[RNDIS_AddReg_NT]
HKR, Ndi, Service, 0, "USB_RNDIS"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
+HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
[RNDIS_EventLog]
--
GitLab
From 16be57259f4e664e4e423caa896963de1b7b8d14 Mon Sep 17 00:00:00 2001
From: "csanchez@neurowork.net" <csanchez@neurowork.net>
Date: Tue, 25 May 2010 10:38:22 -0500
Subject: [PATCH 722/863] USB: core driver: Fix Coding Styles
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Fixed coding styles in the core usb driver.
Signed-off-by: Carlos Sánchez Acosta <csanchez@neurowork.net>
Signed-off-by: Alejandro Sánchez Acosta <asanchez@neurowork.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/driver.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index a6bd53ace0356..880f65baf5813 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1742,9 +1742,8 @@ static int usb_runtime_suspend(struct device *dev)
}
/* Prevent the parent from suspending immediately after */
- else if (udev->parent) {
+ else if (udev->parent)
udev->parent->last_busy = jiffies;
- }
}
/* Runtime suspend for a USB interface doesn't mean anything. */
@@ -1786,7 +1785,7 @@ static int usb_runtime_idle(struct device *dev)
return 0;
}
-static struct dev_pm_ops usb_bus_pm_ops = {
+static const struct dev_pm_ops usb_bus_pm_ops = {
.runtime_suspend = usb_runtime_suspend,
.runtime_resume = usb_runtime_resume,
.runtime_idle = usb_runtime_idle,
@@ -1794,7 +1793,7 @@ static struct dev_pm_ops usb_bus_pm_ops = {
#else
-#define usb_bus_pm_ops (*(struct dev_pm_ops *) NULL)
+#define usb_bus_pm_ops (*(const struct dev_pm_ops *) NULL)
#endif /* CONFIG_USB_SUSPEND */
--
GitLab
From cd62aced31dee9a9a8e63da7bd564911891b3665 Mon Sep 17 00:00:00 2001
From: "csanchez@neurowork.net" <csanchez@neurowork.net>
Date: Tue, 25 May 2010 10:53:17 -0500
Subject: [PATCH 723/863] USB: core endpoint: Fix Coding Styles
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Fixed coding styles in the core usb endpoint.
Signed-off-by: Carlos Sánchez Acosta <csanchez@neurowork.net>
Signed-off-by: Alejandro Sánchez Acosta <asanchez@neurowork.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/endpoint.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 4f84a41ee7a85..3788e738e2650 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -96,16 +96,21 @@ static ssize_t show_ep_interval(struct device *dev,
switch (usb_endpoint_type(ep->desc)) {
case USB_ENDPOINT_XFER_CONTROL:
- if (ep->udev->speed == USB_SPEED_HIGH) /* uframes per NAK */
+ if (ep->udev->speed == USB_SPEED_HIGH)
+ /* uframes per NAK */
interval = ep->desc->bInterval;
break;
+
case USB_ENDPOINT_XFER_ISOC:
interval = 1 << (ep->desc->bInterval - 1);
break;
+
case USB_ENDPOINT_XFER_BULK:
- if (ep->udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */
+ if (ep->udev->speed == USB_SPEED_HIGH && !in)
+ /* uframes per NAK */
interval = ep->desc->bInterval;
break;
+
case USB_ENDPOINT_XFER_INT:
if (ep->udev->speed == USB_SPEED_HIGH)
interval = 1 << (ep->desc->bInterval - 1);
--
GitLab
From 6e1c3b467ffd9d6eb725dda544f6fd10e471ea71 Mon Sep 17 00:00:00 2001
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Thu, 27 May 2010 09:32:13 +0300
Subject: [PATCH 724/863] USB: otg.h: Fix the mixup in parameters order.
otg_io_write() function does not follow the declaration of
struct otg_io_access_ops.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
include/linux/usb/otg.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index f8302d036a767..54b2c5e48b9d7 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -146,10 +146,10 @@ static inline int otg_io_read(struct otg_transceiver *otg, u32 reg)
return -EINVAL;
}
-static inline int otg_io_write(struct otg_transceiver *otg, u32 reg, u32 val)
+static inline int otg_io_write(struct otg_transceiver *otg, u32 val, u32 reg)
{
if (otg->io_ops && otg->io_ops->write)
- return otg->io_ops->write(otg, reg, val);
+ return otg->io_ops->write(otg, val, reg);
return -EINVAL;
}
--
GitLab
From dc6eb27bdd3d214568f7d77a317c202c10222511 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Thu, 27 May 2010 18:10:08 +0200
Subject: [PATCH 725/863] USB: host: Eliminate NULL dereference
The test above allows std to be NULL, so check that std is not NULL before
doing the dereference.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@
if ((E == NULL && ...) || ...)
{
... when != if (...) S1 else S2
when != E = E1
* E->f
... when any
}
else S3
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/whci/qset.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index ab5a14fbfeeba..dc0ab8382f5d7 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -475,7 +475,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u
|| (prev_end & (WHCI_PAGE_SIZE-1))
|| (dma_addr & (WHCI_PAGE_SIZE-1))
|| std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) {
- if (std->len % qset->max_packet != 0)
+ if (std && std->len % qset->max_packet != 0)
return -EINVAL;
std = qset_new_std(whc, qset, urb, mem_flags);
if (std == NULL) {
--
GitLab
From a5cc8049ca8ec8b09b9649f32b6e37f94345ddb8 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 31 May 2010 20:23:19 -0700
Subject: [PATCH 726/863] USB: isd200.c: Remove unnecessary kmalloc cast
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/storage/isd200.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index e9cbc1467f764..6b9982cd54230 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1456,8 +1456,7 @@ static int isd200_init_info(struct us_data *us)
int retStatus = ISD200_GOOD;
struct isd200_info *info;
- info = (struct isd200_info *)
- kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
+ info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
if (!info)
retStatus = ISD200_ERROR;
else {
--
GitLab
From e644814a2ccbfe171d2fd2b9bca491ead1ae1a96 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Date: Tue, 15 Jun 2010 17:04:44 +0300
Subject: [PATCH 727/863] usb: throw away custom hex digit methods
Recent kernel has common method to convert hex digit to its value.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/atm/ueagle-atm.c | 5 +++--
drivers/usb/gadget/u_ether.c | 15 ++-------------
2 files changed, 5 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index ebae94480140e..5b3f555e01c9a 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -67,6 +67,7 @@
#include <linux/mutex.h>
#include <linux/freezer.h>
#include <linux/slab.h>
+#include <linux/kernel.h>
#include <asm/unaligned.h>
@@ -2436,7 +2437,6 @@ UEA_ATTR(firmid, 0);
/* Retrieve the device End System Identifier (MAC) */
-#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10)
static int uea_getesi(struct uea_softc *sc, u_char * esi)
{
unsigned char mac_str[2 * ETH_ALEN + 1];
@@ -2447,7 +2447,8 @@ static int uea_getesi(struct uea_softc *sc, u_char * esi)
return 1;
for (i = 0; i < ETH_ALEN; i++)
- esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]);
+ esi[i] = hex_to_bin(mac_str[2 * i]) * 16 +
+ hex_to_bin(mac_str[2 * i + 1]);
return 0;
}
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 1da755a1c855c..6bb876d652527 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -704,17 +704,6 @@ static char *host_addr;
module_param(host_addr, charp, S_IRUGO);
MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
-
-static u8 __init nibble(unsigned char c)
-{
- if (isdigit(c))
- return c - '0';
- c = toupper(c);
- if (isxdigit(c))
- return 10 + c - 'A';
- return 0;
-}
-
static int get_ether_addr(const char *str, u8 *dev_addr)
{
if (str) {
@@ -725,8 +714,8 @@ static int get_ether_addr(const char *str, u8 *dev_addr)
if ((*str == '.') || (*str == ':'))
str++;
- num = nibble(*str++) << 4;
- num |= (nibble(*str++));
+ num = hex_to_bin(*str++) << 4;
+ num |= hex_to_bin(*str++);
dev_addr [i] = num;
}
if (is_valid_ether_addr(dev_addr))
--
GitLab
From aa4d8342988d0c1a79ff19b2ede1e81dfbb16ea5 Mon Sep 17 00:00:00 2001
From: Alek Du <alek.du@intel.com>
Date: Fri, 4 Jun 2010 15:47:54 +0800
Subject: [PATCH 728/863] USB: EHCI: EHCI 1.1 addendum: preparation
EHCI 1.1 addendum introduced several energy efficiency extensions for
EHCI USB host controllers:
1. LPM (link power management)
2. Per-port change
3. Shorter periodic frame list
4. Hardware prefetching
This patch is intended to define the HW bits and debug interface for
EHCI 1.1 addendum. The LPM and Per-port change patches will be sent out
after this patch.
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-dbg.c | 144 +++++++++++++++++++++++++++++++++--
drivers/usb/host/ehci-hcd.c | 1 +
drivers/usb/host/ehci.h | 1 +
include/linux/usb/ehci_def.h | 23 ++++++
4 files changed, 162 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 874d2000bf92b..df5546bb83679 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -98,13 +98,18 @@ static void dbg_hcc_params (struct ehci_hcd *ehci, char *label)
HCC_64BIT_ADDR(params) ? " 64 bit addr" : "");
} else {
ehci_dbg (ehci,
- "%s hcc_params %04x thresh %d uframes %s%s%s\n",
+ "%s hcc_params %04x thresh %d uframes %s%s%s%s%s%s%s\n",
label,
params,
HCC_ISOC_THRES(params),
HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
HCC_CANPARK(params) ? " park" : "",
- HCC_64BIT_ADDR(params) ? " 64 bit addr" : "");
+ HCC_64BIT_ADDR(params) ? " 64 bit addr" : "",
+ HCC_LPM(params) ? " LPM" : "",
+ HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "",
+ HCC_HW_PREFETCH(params) ? " hw prefetch" : "",
+ HCC_32FRAME_PERIODIC_LIST(params) ?
+ " 32 peridic list" : "");
}
}
#else
@@ -191,8 +196,9 @@ static int __maybe_unused
dbg_status_buf (char *buf, unsigned len, const char *label, u32 status)
{
return scnprintf (buf, len,
- "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s",
+ "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s%s",
label, label [0] ? " " : "", status,
+ (status & STS_PPCE_MASK) ? " PPCE" : "",
(status & STS_ASS) ? " Async" : "",
(status & STS_PSS) ? " Periodic" : "",
(status & STS_RECL) ? " Recl" : "",
@@ -210,8 +216,9 @@ static int __maybe_unused
dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable)
{
return scnprintf (buf, len,
- "%s%sintrenable %02x%s%s%s%s%s%s",
+ "%s%sintrenable %02x%s%s%s%s%s%s%s",
label, label [0] ? " " : "", enable,
+ (enable & STS_PPCE_MASK) ? " PPCE" : "",
(enable & STS_IAA) ? " IAA" : "",
(enable & STS_FATAL) ? " FATAL" : "",
(enable & STS_FLR) ? " FLR" : "",
@@ -228,9 +235,15 @@ static int
dbg_command_buf (char *buf, unsigned len, const char *label, u32 command)
{
return scnprintf (buf, len,
- "%s%scommand %06x %s=%d ithresh=%d%s%s%s%s period=%s%s %s",
+ "%s%scommand %07x %s%s%s%s%s%s=%d ithresh=%d%s%s%s%s "
+ "period=%s%s %s",
label, label [0] ? " " : "", command,
- (command & CMD_PARK) ? "park" : "(park)",
+ (command & CMD_HIRD) ? " HIRD" : "",
+ (command & CMD_PPCEE) ? " PPCEE" : "",
+ (command & CMD_FSP) ? " FSP" : "",
+ (command & CMD_ASPE) ? " ASPE" : "",
+ (command & CMD_PSPE) ? " PSPE" : "",
+ (command & CMD_PARK) ? " park" : "(park)",
CMD_PARK_CNT (command),
(command >> 16) & 0x3f,
(command & CMD_LRESET) ? " LReset" : "",
@@ -257,11 +270,22 @@ dbg_port_buf (char *buf, unsigned len, const char *label, int port, u32 status)
}
return scnprintf (buf, len,
- "%s%sport %d status %06x%s%s sig=%s%s%s%s%s%s%s%s%s%s",
+ "%s%sport:%d status %06x %d %s%s%s%s%s%s "
+ "sig=%s%s%s%s%s%s%s%s%s%s%s",
label, label [0] ? " " : "", port, status,
+ status>>25,/*device address */
+ (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ACK ?
+ " ACK" : "",
+ (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_NYET ?
+ " NYET" : "",
+ (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_STALL ?
+ " STALL" : "",
+ (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ERR ?
+ " ERR" : "",
(status & PORT_POWER) ? " POWER" : "",
(status & PORT_OWNER) ? " OWNER" : "",
sig,
+ (status & PORT_LPM) ? " LPM" : "",
(status & PORT_RESET) ? " RESET" : "",
(status & PORT_SUSPEND) ? " SUSPEND" : "",
(status & PORT_RESUME) ? " RESUME" : "",
@@ -330,6 +354,13 @@ static int debug_async_open(struct inode *, struct file *);
static int debug_periodic_open(struct inode *, struct file *);
static int debug_registers_open(struct inode *, struct file *);
static int debug_async_open(struct inode *, struct file *);
+static int debug_lpm_open(struct inode *, struct file *);
+static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos);
+static ssize_t debug_lpm_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos);
+static int debug_lpm_close(struct inode *inode, struct file *file);
+
static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
static int debug_close(struct inode *, struct file *);
@@ -351,6 +382,13 @@ static const struct file_operations debug_registers_fops = {
.read = debug_output,
.release = debug_close,
};
+static const struct file_operations debug_lpm_fops = {
+ .owner = THIS_MODULE,
+ .open = debug_lpm_open,
+ .read = debug_lpm_read,
+ .write = debug_lpm_write,
+ .release = debug_lpm_close,
+};
static struct dentry *ehci_debug_root;
@@ -917,6 +955,94 @@ static int debug_registers_open(struct inode *inode, struct file *file)
return file->private_data ? 0 : -ENOMEM;
}
+static int debug_lpm_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static int debug_lpm_close(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ /* TODO: show lpm stats */
+ return 0;
+}
+
+static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ char buf[50];
+ size_t len;
+ u32 temp;
+ unsigned long port;
+ u32 __iomem *portsc ;
+ u32 params;
+
+ hcd = bus_to_hcd(file->private_data);
+ ehci = hcd_to_ehci(hcd);
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+ buf[len] = '\0';
+ if (len > 0 && buf[len - 1] == '\n')
+ buf[len - 1] = '\0';
+
+ if (strncmp(buf, "enable", 5) == 0) {
+ if (strict_strtoul(buf + 7, 10, &port))
+ return -EINVAL;
+ params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ if (port > HCS_N_PORTS(params)) {
+ ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port);
+ return -ENODEV;
+ }
+ portsc = &ehci->regs->port_status[port-1];
+ temp = ehci_readl(ehci, portsc);
+ if (!(temp & PORT_DEV_ADDR)) {
+ ehci_dbg(ehci, "LPM: no device attached\n");
+ return -ENODEV;
+ }
+ temp |= PORT_LPM;
+ ehci_writel(ehci, temp, portsc);
+ printk(KERN_INFO "force enable LPM for port %lu\n", port);
+ } else if (strncmp(buf, "hird=", 5) == 0) {
+ unsigned long hird;
+ if (strict_strtoul(buf + 5, 16, &hird))
+ return -EINVAL;
+ printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird);
+ temp = ehci_readl(ehci, &ehci->regs->command);
+ temp &= ~CMD_HIRD;
+ temp |= hird << 24;
+ ehci_writel(ehci, temp, &ehci->regs->command);
+ } else if (strncmp(buf, "disable", 7) == 0) {
+ if (strict_strtoul(buf + 8, 10, &port))
+ return -EINVAL;
+ params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ if (port > HCS_N_PORTS(params)) {
+ ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port);
+ return -ENODEV;
+ }
+ portsc = &ehci->regs->port_status[port-1];
+ temp = ehci_readl(ehci, portsc);
+ if (!(temp & PORT_DEV_ADDR)) {
+ ehci_dbg(ehci, "ERR: no device attached\n");
+ return -ENODEV;
+ }
+ temp &= ~PORT_LPM;
+ ehci_writel(ehci, temp, portsc);
+ printk(KERN_INFO "disabled LPM for port %lu\n", port);
+ } else
+ return -EOPNOTSUPP;
+ return count;
+}
+
static inline void create_debug_files (struct ehci_hcd *ehci)
{
struct usb_bus *bus = &ehci_to_hcd(ehci)->self;
@@ -940,6 +1066,10 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
ehci->debug_registers = debugfs_create_file("registers", S_IRUGO,
ehci->debug_dir, bus,
&debug_registers_fops);
+
+ ehci->debug_registers = debugfs_create_file("lpm", S_IRUGO|S_IWUGO,
+ ehci->debug_dir, bus,
+ &debug_lpm_fops);
if (!ehci->debug_registers)
goto registers_error;
return;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index a3ef2a9d9dc27..20ca6a9ff2131 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -36,6 +36,7 @@
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/uaccess.h>
#include <asm/byteorder.h>
#include <asm/io.h>
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 650a687f2854e..bfaac16463653 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -157,6 +157,7 @@ struct ehci_hcd { /* one per controller */
struct dentry *debug_async;
struct dentry *debug_periodic;
struct dentry *debug_registers;
+ struct dentry *debug_lpm;
#endif
};
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 80287af2a738a..2e262cb15425c 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -39,6 +39,12 @@ struct ehci_caps {
#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+/* EHCI 1.1 addendum */
+#define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19))
+#define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18))
+#define HCC_LPM(p) ((p)&(1 << 17))
+#define HCC_HW_PREFETCH(p) ((p)&(1 << 16))
+
#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
@@ -54,6 +60,13 @@ struct ehci_regs {
/* USBCMD: offset 0x00 */
u32 command;
+
+/* EHCI 1.1 addendum */
+#define CMD_HIRD (0xf<<24) /* host initiated resume duration */
+#define CMD_PPCEE (1<<15) /* per port change event enable */
+#define CMD_FSP (1<<14) /* fully synchronized prefetch */
+#define CMD_ASPE (1<<13) /* async schedule prefetch enable */
+#define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */
/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
#define CMD_PARK (1<<11) /* enable "park" on async qh */
#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
@@ -67,6 +80,7 @@ struct ehci_regs {
/* USBSTS: offset 0x04 */
u32 status;
+#define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */
#define STS_ASS (1<<15) /* Async Schedule Status */
#define STS_PSS (1<<14) /* Periodic Schedule Status */
#define STS_RECL (1<<13) /* Reclamation */
@@ -100,6 +114,14 @@ struct ehci_regs {
/* PORTSC: offset 0x44 */
u32 port_status[0]; /* up to N_PORTS */
+/* EHCI 1.1 addendum */
+#define PORTSC_SUSPEND_STS_ACK 0
+#define PORTSC_SUSPEND_STS_NYET 1
+#define PORTSC_SUSPEND_STS_STALL 2
+#define PORTSC_SUSPEND_STS_ERR 3
+
+#define PORT_DEV_ADDR (0x7f<<25) /* device address */
+#define PORT_SSTS (0x3<<23) /* suspend status */
/* 31:23 reserved */
#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
@@ -115,6 +137,7 @@ struct ehci_regs {
#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
/* 9 reserved */
+#define PORT_LPM (1<<9) /* LPM transaction */
#define PORT_RESET (1<<8) /* reset port */
#define PORT_SUSPEND (1<<7) /* suspend port */
#define PORT_RESUME (1<<6) /* resume it */
--
GitLab
From 48f24970144479c29b8cee6d2e1dbedf6dcf9cfb Mon Sep 17 00:00:00 2001
From: Alek Du <alek.du@intel.com>
Date: Fri, 4 Jun 2010 15:47:55 +0800
Subject: [PATCH 729/863] USB: EHCI: EHCI 1.1 addendum: Basic LPM feature
support
With this patch, the LPM capable EHCI host controller can put device
into L1 sleep state which is a mode that can enter/exit quickly, and
reduce power consumption.
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hub.c | 4 +-
drivers/usb/host/ehci-hcd.c | 17 ++++++++
drivers/usb/host/ehci-hub.c | 5 +++
drivers/usb/host/ehci-lpm.c | 83 +++++++++++++++++++++++++++++++++++++
drivers/usb/host/ehci-pci.c | 21 ++++++++++
drivers/usb/host/ehci.h | 2 +-
include/linux/usb/hcd.h | 4 ++
7 files changed, 134 insertions(+), 2 deletions(-)
create mode 100644 drivers/usb/host/ehci-lpm.c
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 70cccc75a3620..9cd77a2af821f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2880,7 +2880,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
}
retval = 0;
-
+ /* notify HCD that we have a device connected and addressed */
+ if (hcd->driver->update_device)
+ hcd->driver->update_device(hcd, udev);
fail:
if (retval) {
hub_port_disable(hub, port1, 0);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 20ca6a9ff2131..baf9b648bb1f4 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -101,6 +101,11 @@ static int ignore_oc = 0;
module_param (ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+/* for link power management(LPM) feature */
+static unsigned int hird;
+module_param(hird, int, S_IRUGO);
+MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
+
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
/*-------------------------------------------------------------------------*/
@@ -305,6 +310,7 @@ static void end_unlink_async(struct ehci_hcd *ehci);
static void ehci_work(struct ehci_hcd *ehci);
#include "ehci-hub.c"
+#include "ehci-lpm.c"
#include "ehci-mem.c"
#include "ehci-q.c"
#include "ehci-sched.c"
@@ -604,6 +610,17 @@ static int ehci_init(struct usb_hcd *hcd)
default: BUG();
}
}
+ if (HCC_LPM(hcc_params)) {
+ /* support link power management EHCI 1.1 addendum */
+ ehci_dbg(ehci, "support lpm\n");
+ ehci->has_lpm = 1;
+ if (hird > 0xf) {
+ ehci_dbg(ehci, "hird %d invalid, use default 0",
+ hird);
+ hird = 0;
+ }
+ temp |= hird << 24;
+ }
ehci->command = temp;
/* Accept arbitrarily long scatter-gather lists */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index e7d3d8def2829..8a28dae8a375b 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -790,6 +790,11 @@ static int ehci_hub_control (
status_reg);
break;
case USB_PORT_FEAT_C_CONNECTION:
+ if (ehci->has_lpm) {
+ /* clear PORTSC bits on disconnect */
+ temp &= ~PORT_LPM;
+ temp &= ~PORT_DEV_ADDR;
+ }
ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
status_reg);
break;
diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c
new file mode 100644
index 0000000000000..b4d4d63c13ed8
--- /dev/null
+++ b/drivers/usb/host/ehci-lpm.c
@@ -0,0 +1,83 @@
+/* ehci-lpm.c EHCI HCD LPM support code
+ * Copyright (c) 2008 - 2010, Intel Corporation.
+ * Author: Jacob Pan <jacob.jun.pan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* this file is part of ehci-hcd.c */
+static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num)
+{
+ u32 __iomem portsc;
+
+ ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num);
+ if (port_num > HCS_N_PORTS(ehci->hcs_params)) {
+ ehci_dbg(ehci, "invalid port number %d\n", port_num);
+ return -ENODEV;
+ }
+ portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]);
+ portsc &= ~PORT_DEV_ADDR;
+ portsc |= dev_addr<<25;
+ ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]);
+ return 0;
+}
+
+/*
+ * this function is used to check if the device support LPM
+ * if yes, mark the PORTSC register with PORT_LPM bit
+ */
+static int ehci_lpm_check(struct ehci_hcd *ehci, int port)
+{
+ u32 __iomem *portsc ;
+ u32 val32;
+ int retval;
+
+ portsc = &ehci->regs->port_status[port-1];
+ val32 = ehci_readl(ehci, portsc);
+ if (!(val32 & PORT_DEV_ADDR)) {
+ ehci_dbg(ehci, "LPM: no device attached\n");
+ return -ENODEV;
+ }
+ val32 |= PORT_LPM;
+ ehci_writel(ehci, val32, portsc);
+ msleep(5);
+ val32 |= PORT_SUSPEND;
+ ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port);
+ ehci_writel(ehci, val32, portsc);
+ /* wait for ACK */
+ msleep(10);
+ retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS,
+ PORTSC_SUSPEND_STS_ACK, 125);
+ dbg_port(ehci, "LPM", port, val32);
+ if (retval != -ETIMEDOUT) {
+ ehci_dbg(ehci, "LPM: device ACK for LPM\n");
+ val32 |= PORT_LPM;
+ /*
+ * now device should be in L1 sleep, let's wake up the device
+ * so that we can complete enumeration.
+ */
+ ehci_writel(ehci, val32, portsc);
+ msleep(10);
+ val32 |= PORT_RESUME;
+ ehci_writel(ehci, val32, portsc);
+ } else {
+ ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n",
+ retval);
+ val32 &= ~PORT_LPM;
+ retval = -ETIMEDOUT;
+ ehci_writel(ehci, val32, portsc);
+ }
+
+ return retval;
+}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index d43d176161aab..a307d550bdafe 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -361,6 +361,22 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
}
#endif
+static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int rc = 0;
+
+ if (!udev->parent) /* udev is root hub itself, impossible */
+ rc = -1;
+ /* we only support lpm device connected to root hub yet */
+ if (ehci->has_lpm && !udev->parent->parent) {
+ rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
+ if (!rc)
+ rc = ehci_lpm_check(ehci, udev->portnum);
+ }
+ return rc;
+}
+
static const struct hc_driver ehci_pci_hc_driver = {
.description = hcd_name,
.product_desc = "EHCI Host Controller",
@@ -407,6 +423,11 @@ static const struct hc_driver ehci_pci_hc_driver = {
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+ /*
+ * call back when device connected and addressed
+ */
+ .update_device = ehci_update_device,
+
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bfaac16463653..21f30a0c3d2fe 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -140,7 +140,7 @@ struct ehci_hcd { /* one per controller */
#define OHCI_HCCTRL_LEN 0x4
__hc32 *ohci_hcctrl_reg;
unsigned has_hostpc:1;
-
+ unsigned has_lpm:1; /* support link power management */
u8 sbrn; /* packed release number */
/* irq statistics */
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 11b6381959014..9b867e64a0f46 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -300,6 +300,10 @@ struct hc_driver {
int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
int (*reset_device)(struct usb_hcd *, struct usb_device *);
+ /* Notifies the HCD after a device is connected and its
+ * address is set
+ */
+ int (*update_device)(struct usb_hcd *, struct usb_device *);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
--
GitLab
From 5a9cdf332eae724b11906cb1712e3a662eba32b2 Mon Sep 17 00:00:00 2001
From: Alek Du <alek.du@intel.com>
Date: Fri, 4 Jun 2010 15:47:56 +0800
Subject: [PATCH 730/863] USB: EHCI: EHCI 1.1 addendum: Enable Per-port change
detect bits
This patch will enable Per-port event feature defined in EHCI 1.1
addendum. This feature addresses an issue where HCD is currently
required to read and parse PORTSC for all enabled root hub ports. With
this patch, the overhead will be reduced.
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-hcd.c | 19 +++++++++++++++++--
drivers/usb/host/ehci-hub.c | 9 +++++++++
drivers/usb/host/ehci.h | 1 +
3 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index baf9b648bb1f4..8697ad19f313c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -584,6 +584,11 @@ static int ehci_init(struct usb_hcd *hcd)
if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
log2_irq_thresh = 0;
temp = 1 << (16 + log2_irq_thresh);
+ if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
+ ehci->has_ppcd = 1;
+ ehci_dbg(ehci, "enable per-port change event\n");
+ temp |= CMD_PPCEE;
+ }
if (HCC_CANPARK(hcc_params)) {
/* HW default park == 3, on hardware that supports it (like
* NVidia and ALI silicon), maximizes throughput on the async
@@ -782,6 +787,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
/* remote wakeup [4.3.1] */
if (status & STS_PCD) {
unsigned i = HCS_N_PORTS (ehci->hcs_params);
+ u32 ppcd = 0;
/* kick root hub later */
pcd_status = status;
@@ -790,9 +796,18 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
if (!(cmd & CMD_RUN))
usb_hcd_resume_root_hub(hcd);
+ /* get per-port change detect bits */
+ if (ehci->has_ppcd)
+ ppcd = status >> 16;
+
while (i--) {
- int pstatus = ehci_readl(ehci,
- &ehci->regs->port_status [i]);
+ int pstatus;
+
+ /* leverage per-port change bits feature */
+ if (ehci->has_ppcd && !(ppcd & (1 << i)))
+ continue;
+ pstatus = ehci_readl(ehci,
+ &ehci->regs->port_status[i]);
if (pstatus & PORT_OWNER)
continue;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 8a28dae8a375b..84e792d71c224 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -603,6 +603,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
u32 mask;
int ports, i, retval = 1;
unsigned long flags;
+ u32 ppcd = 0;
/* if !USB_SUSPEND, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
@@ -632,7 +633,15 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
/* port N changes (bit N)? */
spin_lock_irqsave (&ehci->lock, flags);
+
+ /* get per-port change detect bits */
+ if (ehci->has_ppcd)
+ ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
+
for (i = 0; i < ports; i++) {
+ /* leverage per-port change bits feature */
+ if (ehci->has_ppcd && !(ppcd & (1 << i)))
+ continue;
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
/*
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 21f30a0c3d2fe..e6c57cc416f68 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -141,6 +141,7 @@ struct ehci_hcd { /* one per controller */
__hc32 *ohci_hcctrl_reg;
unsigned has_hostpc:1;
unsigned has_lpm:1; /* support link power management */
+ unsigned has_ppcd:1; /* support per-port change bits */
u8 sbrn; /* packed release number */
/* irq statistics */
--
GitLab
From 3f37bca1038de01ab2666adde1954460c35ff3af Mon Sep 17 00:00:00 2001
From: Leann Ogasawara <leann.ogasawara@canonical.com>
Date: Thu, 10 Jun 2010 14:51:51 -0700
Subject: [PATCH 731/863] USB: option: Remove duplicate AMOI_VENDOR_ID
AMOI_VENDOR_ID is defined twice. Remove the duplicate entry and move
the AMOI_PRODUCT_9508 definition to be grouped with the other AMOI
product definitions.
Originally-by: Ben Collins <ben.collins@ubuntu.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/option.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5cd30e4345c62..a8c54b2116a65 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -264,9 +264,6 @@ static void option_instat_callback(struct urb *urb);
#define BANDRICH_PRODUCT_1011 0x1011
#define BANDRICH_PRODUCT_1012 0x1012
-#define AMOI_VENDOR_ID 0x1614
-#define AMOI_PRODUCT_9508 0x0800
-
#define QUALCOMM_VENDOR_ID 0x05C6
#define CMOTECH_VENDOR_ID 0x16d8
@@ -483,7 +480,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
- { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */
--
GitLab
From c48271e0729a42a0692a5b7e1aa1552d7f2ff8ab Mon Sep 17 00:00:00 2001
From: Leann Ogasawara <leann.ogasawara@canonical.com>
Date: Thu, 10 Jun 2010 15:49:24 -0700
Subject: [PATCH 732/863] Revert "USB: Adding support for HTC Smartphones to
ipaq"
ipaq already had this device id defined:
{ USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC USB Modem */
Revert the commit which adds the duplicate entry.
This reverts commit 04cab1329336d4577d6638360c905e360934b425.
Originally-by: Ben Collins <ben.collins@canonical.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/ipaq.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 28913fa95fb7b..4735931b4c7be 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -534,7 +534,6 @@ static struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
{ USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
{ USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
- { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */
{ } /* Terminating entry */
};
--
GitLab
From f7244ce6530fc500a0d99cab0a110da7ff892e56 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 10 Jun 2010 19:20:43 -0700
Subject: [PATCH 733/863] USB: gadget: langwell_udc.c: printk needs a (unsigned
long long) cast for a dma_t
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/langwell_udc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a3913519fd584..c2d2a201f84bc 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -842,9 +842,9 @@ static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
VDBG(dev, "req->mapped = 0\n");
}
- DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
- _ep->name,
- _req, _req->length, _req->buf, _req->dma);
+ DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08llx\n",
+ _ep->name,
+ _req, _req->length, _req->buf, (unsigned long long)_req->dma);
_req->status = -EINPROGRESS;
_req->actual = 0;
--
GitLab
From 83a3ac866d6931611d37ded24a2a2cc99fe36e9f Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Wed, 16 Jun 2010 18:56:05 +0200
Subject: [PATCH 734/863] usb: conexant: fixed spacing and brace coding style
issues
Fixed spacing and brace coding style issues.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/atm/cxacru.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 101ffc965ee00..593fc5e2d2e60 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -564,7 +564,7 @@ static void cxacru_timeout_kill(unsigned long data)
}
static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
- int* actual_length)
+ int *actual_length)
{
struct timer_list timer;
@@ -952,7 +952,7 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb));
offb += 4;
addr += l;
- if(l)
+ if (l)
memcpy(buf + offb, data + offd, l);
if (l < stride)
memset(buf + offb + l, 0, stride - l);
@@ -967,7 +967,7 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
}
offb = 0;
}
- } while(offd < size);
+ } while (offd < size);
dbg("sent fw %#x", fw);
ret = 0;
@@ -1043,8 +1043,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
if (instance->modem_type->boot_rom_patch) {
val = cpu_to_le32(BR_ADDR);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4);
- }
- else {
+ } else {
ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
}
if (ret) {
@@ -1068,7 +1067,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
}
static int cxacru_find_firmware(struct cxacru_data *instance,
- char* phase, const struct firmware **fw_p)
+ char *phase, const struct firmware **fw_p)
{
struct usbatm_data *usbatm = instance->usbatm;
struct device *dev = &usbatm->usb_intf->dev;
--
GitLab
From 87eb1bead832b9880126fdbea74cc8ecb22b50c0 Mon Sep 17 00:00:00 2001
From: Yann Cantin <yann.cantin@laposte.net>
Date: Sat, 5 Jun 2010 23:06:31 +0200
Subject: [PATCH 735/863] USB: Add a serial number parameter to g_file_storage
module
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This patch add a serial number parameter to the g_file_storage
module. There's validity checks against the string passed to comply
with the specs.
Signed-off-by: Yann Cantin <yann.cantin@laposte.net>
Cc: Michał Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/file_storage.c | 69 ++++++++++++++++++++++++++-----
1 file changed, 58 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b49d86e3e45b6..2b6d3649d02cc 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -56,7 +56,7 @@
* following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
* UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
* the optional "protocol" module parameter. In addition, the default
- * Vendor ID, Product ID, and release number can be overridden.
+ * Vendor ID, Product ID, release number and serial number can be overridden.
*
* There is support for multiple logical units (LUNs), each of which has
* its own backing file. The number of LUNs can be set using the optional
@@ -106,6 +106,7 @@
* vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID
* product=0xPPPP Default 0xa4a5 (FSG), USB Product ID
* release=0xRRRR Override the USB release number (bcdDevice)
+ * serial=HHHH... Override serial number (string of hex chars)
* buflen=N Default N=16384, buffer size used (will be
* rounded down to a multiple of
* PAGE_CACHE_SIZE)
@@ -270,6 +271,8 @@
#define DRIVER_DESC "File-backed Storage Gadget"
#define DRIVER_NAME "g_file_storage"
+/* DRIVER_VERSION must be at least 6 characters long, as it is used
+ * to generate a fallback serial number. */
#define DRIVER_VERSION "20 November 2008"
static char fsg_string_manufacturer[64];
@@ -314,6 +317,7 @@ static struct {
unsigned short vendor;
unsigned short product;
unsigned short release;
+ char *serial_parm;
unsigned int buflen;
int transport_type;
@@ -374,6 +378,9 @@ MODULE_PARM_DESC(product, "USB Product ID");
module_param_named(release, mod_data.release, ushort, S_IRUGO);
MODULE_PARM_DESC(release, "USB release number");
+module_param_named(serial, mod_data.serial_parm, charp, S_IRUGO);
+MODULE_PARM_DESC(serial, "USB serial number");
+
module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
MODULE_PARM_DESC(buflen, "I/O buffer size");
@@ -3197,6 +3204,7 @@ static int __init check_parameters(struct fsg_dev *fsg)
{
int prot;
int gcnum;
+ int i;
/* Store the default values */
mod_data.transport_type = USB_PR_BULK;
@@ -3272,6 +3280,55 @@ static int __init check_parameters(struct fsg_dev *fsg)
ERROR(fsg, "invalid buflen\n");
return -ETOOSMALL;
}
+
+ /* Serial string handling.
+ * On a real device, the serial string would be loaded
+ * from permanent storage. */
+ if (mod_data.serial_parm) {
+ const char *ch;
+ unsigned len = 0;
+
+ /* Sanity check :
+ * The CB[I] specification limits the serial string to
+ * 12 uppercase hexadecimal characters.
+ * BBB need at least 12 uppercase hexadecimal characters,
+ * with a maximum of 126. */
+ for (ch = mod_data.serial_parm; *ch; ++ch) {
+ ++len;
+ if ((*ch < '0' || *ch > '9') &&
+ (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
+ WARNING(fsg,
+ "Invalid serial string character: %c; "
+ "Failing back to default\n",
+ *ch);
+ goto fill_serial;
+ }
+ }
+ if (len > 126 ||
+ (mod_data.transport_type == USB_PR_BULK && len < 12) ||
+ (mod_data.transport_type != USB_PR_BULK && len > 12)) {
+ WARNING(fsg,
+ "Invalid serial string length; "
+ "Failing back to default\n");
+ goto fill_serial;
+ }
+ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial_parm;
+ } else {
+fill_serial:
+ /* Serial number not specified or invalid, make our own.
+ * We just encode it from the driver version string,
+ * 12 characters to comply with both CB[I] and BBB spec.
+ * Warning : Two devices running the same kernel will have
+ * the same fallback serial number. */
+ for (i = 0; i < 12; i += 2) {
+ unsigned char c = DRIVER_VERSION[i / 2];
+
+ if (!c)
+ break;
+ sprintf(&fsg_string_serial[i], "%02X", c);
+ }
+ }
+
#endif /* CONFIG_USB_FILE_STORAGE_TEST */
return 0;
@@ -3447,16 +3504,6 @@ static int __init fsg_bind(struct usb_gadget *gadget)
init_utsname()->sysname, init_utsname()->release,
gadget->name);
- /* On a real device, serial[] would be loaded from permanent
- * storage. We just encode it from the driver version string. */
- for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) {
- unsigned char c = DRIVER_VERSION[i / 2];
-
- if (!c)
- break;
- sprintf(&fsg_string_serial[i], "%02X", c);
- }
-
fsg->thread_task = kthread_create(fsg_main_thread, fsg,
"file-storage-gadget");
if (IS_ERR(fsg->thread_task)) {
--
GitLab
From 16f76a7654cf603ca13543e4f914ec8b6cd9ffb2 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Thu, 17 Jun 2010 11:55:49 +0200
Subject: [PATCH 736/863] usb: atm: fixed spacing and indentation coding style
issues
Fixed spacing and indentation coding style issues.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/atm/usbatm.h | 22 +++++++++++-----------
drivers/usb/atm/xusbatm.c | 10 +++++-----
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
index 0863f85fcc267..5fc489405217b 100644
--- a/drivers/usb/atm/usbatm.h
+++ b/drivers/usb/atm/usbatm.h
@@ -48,7 +48,7 @@
dev_warn(&(instance)->usb_intf->dev, \
"failed assertion '%s' at line %d", \
__stringify(x), __LINE__); \
- } while(0)
+ } while (0)
#endif
#define usb_err(instance, format, arg...) \
@@ -59,7 +59,7 @@
dev_warn(&(instance)->usb_intf->dev , format , ## arg)
#ifdef DEBUG
#define usb_dbg(instance, format, arg...) \
- dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
+ dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
#else
#define usb_dbg(instance, format, arg...) \
do {} while (0)
@@ -104,21 +104,21 @@ struct usbatm_data;
/*
* Assuming all methods exist and succeed, they are called in this order:
*
-* bind, heavy_init, atm_start, ..., atm_stop, unbind
+* bind, heavy_init, atm_start, ..., atm_stop, unbind
*/
struct usbatm_driver {
const char *driver_name;
/* init device ... can sleep, or cause probe() failure */
- int (*bind) (struct usbatm_data *, struct usb_interface *,
+ int (*bind) (struct usbatm_data *, struct usb_interface *,
const struct usb_device_id *id);
/* additional device initialization that is too slow to be done in probe() */
- int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
+ int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
/* cleanup device ... can sleep, but can't fail */
- void (*unbind) (struct usbatm_data *, struct usb_interface *);
+ void (*unbind) (struct usbatm_data *, struct usb_interface *);
/* init ATM device ... can sleep, or cause ATM initialization failure */
int (*atm_start) (struct usbatm_data *, struct atm_dev *);
@@ -126,9 +126,9 @@ struct usbatm_driver {
/* cleanup ATM device ... can sleep, but can't fail */
void (*atm_stop) (struct usbatm_data *, struct atm_dev *);
- int bulk_in; /* bulk rx endpoint */
- int isoc_in; /* isochronous rx endpoint */
- int bulk_out; /* bulk tx endpoint */
+ int bulk_in; /* bulk rx endpoint */
+ int isoc_in; /* isochronous rx endpoint */
+ int bulk_out; /* bulk tx endpoint */
unsigned rx_padding;
unsigned tx_padding;
@@ -156,7 +156,7 @@ struct usbatm_channel {
struct usbatm_data {
/******************
* public fields *
- ******************/
+ ******************/
/* mini driver */
struct usbatm_driver *driver;
@@ -174,7 +174,7 @@ struct usbatm_data {
/********************************
* private fields - do not use *
- ********************************/
+ ********************************/
struct kref refcount;
struct mutex serialize;
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index 17d167bbd2dc3..48ee0c5ff2823 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -49,13 +49,13 @@ static struct usbatm_driver xusbatm_drivers[XUSBATM_DRIVERS_MAX];
static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1];
static struct usb_driver xusbatm_usb_driver;
-static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int altsetting, u8 ep)
+static struct usb_interface *xusbatm_find_intf(struct usb_device *usb_dev, int altsetting, u8 ep)
{
struct usb_host_interface *alt;
struct usb_interface *intf;
int i, j;
- for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
+ for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting)))
for (j = 0; j < alt->desc.bNumEndpoints; j++)
if (alt->endpoint[j].desc.bEndpointAddress == ep)
@@ -63,7 +63,7 @@ static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int
return NULL;
}
-static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *usb_dev,
+static int xusbatm_capture_intf(struct usbatm_data *usbatm, struct usb_device *usb_dev,
struct usb_interface *intf, int altsetting, int claim)
{
int ifnum = intf->altsetting->desc.bInterfaceNumber;
@@ -80,7 +80,7 @@ static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *
return 0;
}
-static void xusbatm_release_intf (struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
+static void xusbatm_release_intf(struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
{
if (claimed) {
usb_set_intfdata(intf, NULL);
@@ -147,7 +147,7 @@ static void xusbatm_unbind(struct usbatm_data *usbatm,
usb_dbg(usbatm, "%s entered\n", __func__);
- for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
+ for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *cur_intf = usb_dev->actconfig->interface[i];
if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) {
--
GitLab
From 6e12ea4658487ba9c746e95b31014cb89f63703b Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Tue, 1 Jun 2010 23:04:40 +0200
Subject: [PATCH 737/863] USB-BKL: Remove lock_kernel in usbfs update_sb()
The code this is attempting to lock against does not use the BKL,
so it's not needed.
Most likely this code is still broken/racy (Al Viro also thinks so),
but removing the BKL should not make it worse than before.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/inode.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 1a27618b67d61..095fa53666909 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -265,13 +265,9 @@ static int remount(struct super_block *sb, int *flags, char *data)
return -EINVAL;
}
- lock_kernel();
-
if (usbfs_mount && usbfs_mount->mnt_sb)
update_sb(usbfs_mount->mnt_sb);
- unlock_kernel();
-
return 0;
}
--
GitLab
From c532b29a6f6d31e84a7c88f995eebdc75ebd4248 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Tue, 1 Jun 2010 23:04:41 +0200
Subject: [PATCH 738/863] USB-BKL: Convert usb_driver ioctl to unlocked_ioctl
And audit all the users. None needed the BKL. That was easy
because there was only very few around.
Tested with allmodconfig build on x86-64
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
From: Andi Kleen <ak@linux.intel.com>
---
drivers/usb/core/devio.c | 7 ++-----
drivers/usb/core/hub.c | 3 ++-
drivers/usb/misc/usbtest.c | 3 ++-
include/linux/usb.h | 2 +-
4 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index c2f62a3993d2b..f1aaff6202a58 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1668,13 +1668,10 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
default:
if (intf->dev.driver)
driver = to_usb_driver(intf->dev.driver);
- if (driver == NULL || driver->ioctl == NULL) {
+ if (driver == NULL || driver->unlocked_ioctl == NULL) {
retval = -ENOTTY;
} else {
- /* keep API that guarantees BKL */
- lock_kernel();
- retval = driver->ioctl(intf, ctl->ioctl_code, buf);
- unlock_kernel();
+ retval = driver->unlocked_ioctl(intf, ctl->ioctl_code, buf);
if (retval == -ENOIOCTLCMD)
retval = -ENOTTY;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9cd77a2af821f..d337ef80bf434 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1294,6 +1294,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
return -ENODEV;
}
+/* No BKL needed */
static int
hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
{
@@ -3465,7 +3466,7 @@ static struct usb_driver hub_driver = {
.reset_resume = hub_reset_resume,
.pre_reset = hub_pre_reset,
.post_reset = hub_post_reset,
- .ioctl = hub_ioctl,
+ .unlocked_ioctl = hub_ioctl,
.id_table = hub_id_table,
.supports_autosuspend = 1,
};
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 16dffe99d9f1c..0cfbd789ddf27 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1548,6 +1548,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
* off just killing the userspace task and waiting for it to exit.
*/
+/* No BKL needed */
static int
usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
{
@@ -2170,7 +2171,7 @@ static struct usb_driver usbtest_driver = {
.name = "usbtest",
.id_table = id_table,
.probe = usbtest_probe,
- .ioctl = usbtest_ioctl,
+ .unlocked_ioctl = usbtest_ioctl,
.disconnect = usbtest_disconnect,
.suspend = usbtest_suspend,
.resume = usbtest_resume,
diff --git a/include/linux/usb.h b/include/linux/usb.h
index d5922a8779945..e6cbc34901f47 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -843,7 +843,7 @@ struct usb_driver {
void (*disconnect) (struct usb_interface *intf);
- int (*ioctl) (struct usb_interface *intf, unsigned int code,
+ int (*unlocked_ioctl) (struct usb_interface *intf, unsigned int code,
void *buf);
int (*suspend) (struct usb_interface *intf, pm_message_t message);
--
GitLab
From 0daeed381c6a33fdbdc3b0e9f09d96f0a2a8a195 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Tue, 1 Jun 2010 23:04:42 +0200
Subject: [PATCH 739/863] USB-BKL: Remove BKL use for usb serial driver probing
The usb serial driver initialization tried to use the BKL to stop
driver modules from unloading, but that didn't work anyways.
There was already some code to do proper try_module_get,
but it was conditional on having a new probe interface.
I checked all the low level drivers and they all have proper
.owner = THIS_MODULE, so it's ok to always use.
The other problem was the usb_serial_driver_list needing
protection by a lock. This was broken anyways because unregister
did not necessarily have the BKL.
I extended the extending table_lock mutex to protect this case too.
With these changes the BKL can be removed here.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/usb-serial.c | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 941c2d409f857..443468e9d66e0 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -653,6 +653,7 @@ static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
return id;
}
+/* Caller must hold table_lock */
static struct usb_serial_driver *search_serial_device(
struct usb_interface *iface)
{
@@ -718,17 +719,23 @@ int usb_serial_probe(struct usb_interface *interface,
int num_ports = 0;
int max_endpoints;
- lock_kernel(); /* guard against unloading a serial driver module */
+ mutex_lock(&table_lock);
type = search_serial_device(interface);
if (!type) {
- unlock_kernel();
+ mutex_unlock(&table_lock);
dbg("none matched");
return -ENODEV;
}
+ if (!try_module_get(type->driver.owner)) {
+ mutex_unlock(&table_lock);
+ dev_err(&interface->dev, "module get failed, exiting\n");
+ return -EIO;
+ }
+ mutex_unlock(&table_lock);
+
serial = create_serial(dev, interface, type);
if (!serial) {
- unlock_kernel();
dev_err(&interface->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
@@ -737,20 +744,11 @@ int usb_serial_probe(struct usb_interface *interface,
if (type->probe) {
const struct usb_device_id *id;
- if (!try_module_get(type->driver.owner)) {
- unlock_kernel();
- dev_err(&interface->dev,
- "module get failed, exiting\n");
- kfree(serial);
- return -EIO;
- }
-
id = get_iface_id(type, interface);
retval = type->probe(serial, id);
module_put(type->driver.owner);
if (retval) {
- unlock_kernel();
dbg("sub driver rejected device");
kfree(serial);
return retval;
@@ -822,7 +820,6 @@ int usb_serial_probe(struct usb_interface *interface,
* properly during a later invocation of usb_serial_probe
*/
if (num_bulk_in == 0 || num_bulk_out == 0) {
- unlock_kernel();
dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
kfree(serial);
return -ENODEV;
@@ -835,7 +832,6 @@ int usb_serial_probe(struct usb_interface *interface,
if (type == &usb_serial_generic_device) {
num_ports = num_bulk_out;
if (num_ports == 0) {
- unlock_kernel();
dev_err(&interface->dev,
"Generic device with no bulk out, not allowed.\n");
kfree(serial);
@@ -847,7 +843,6 @@ int usb_serial_probe(struct usb_interface *interface,
/* if this device type has a calc_num_ports function, call it */
if (type->calc_num_ports) {
if (!try_module_get(type->driver.owner)) {
- unlock_kernel();
dev_err(&interface->dev,
"module get failed, exiting\n");
kfree(serial);
@@ -878,7 +873,6 @@ int usb_serial_probe(struct usb_interface *interface,
max_endpoints = max(max_endpoints, num_interrupt_out);
max_endpoints = max(max_endpoints, (int)serial->num_ports);
serial->num_port_pointers = max_endpoints;
- unlock_kernel();
dbg("%s - setting up %d port structures for this device",
__func__, max_endpoints);
@@ -1349,6 +1343,7 @@ int usb_serial_register(struct usb_serial_driver *driver)
driver->description = driver->driver.name;
/* Add this device to our list of devices */
+ mutex_lock(&table_lock);
list_add(&driver->driver_list, &usb_serial_driver_list);
retval = usb_serial_bus_register(driver);
@@ -1360,6 +1355,7 @@ int usb_serial_register(struct usb_serial_driver *driver)
printk(KERN_INFO "USB Serial support registered for %s\n",
driver->description);
+ mutex_unlock(&table_lock);
return retval;
}
EXPORT_SYMBOL_GPL(usb_serial_register);
@@ -1370,8 +1366,10 @@ void usb_serial_deregister(struct usb_serial_driver *device)
/* must be called with BKL held */
printk(KERN_INFO "USB Serial deregistering driver %s\n",
device->description);
+ mutex_lock(&table_lock);
list_del(&device->driver_list);
usb_serial_bus_deregister(device);
+ mutex_unlock(&table_lock);
}
EXPORT_SYMBOL_GPL(usb_serial_deregister);
--
GitLab
From 00b81fb23a4937a24cb010f41ac173a786eb4c55 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Tue, 1 Jun 2010 23:04:43 +0200
Subject: [PATCH 740/863] USB-BKL: Remove BKL use in uhci-debug
BKL was not really needed, just came from earlier push downs.
The only part that's a bit dodgy is the lseek function. Would
need another lock or atomic access to fpos on 32bit?
Better to have a libfs lseek
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/uhci-debug.c | 20 +++++++-------------
1 file changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 98cf0b26b9684..c168999722d14 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -495,18 +495,16 @@ static int uhci_debug_open(struct inode *inode, struct file *file)
{
struct uhci_hcd *uhci = inode->i_private;
struct uhci_debug *up;
- int ret = -ENOMEM;
unsigned long flags;
- lock_kernel();
up = kmalloc(sizeof(*up), GFP_KERNEL);
if (!up)
- goto out;
+ return -ENOMEM;
up->data = kmalloc(MAX_OUTPUT, GFP_KERNEL);
if (!up->data) {
kfree(up);
- goto out;
+ return -ENOMEM;
}
up->size = 0;
@@ -517,10 +515,7 @@ static int uhci_debug_open(struct inode *inode, struct file *file)
file->private_data = up;
- ret = 0;
-out:
- unlock_kernel();
- return ret;
+ return 0;
}
static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence)
@@ -528,9 +523,9 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence)
struct uhci_debug *up;
loff_t new = -1;
- lock_kernel();
up = file->private_data;
+ /* XXX: atomic 64bit seek access, but that needs to be fixed in the VFS */
switch (whence) {
case 0:
new = off;
@@ -539,11 +534,10 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence)
new = file->f_pos + off;
break;
}
- if (new < 0 || new > up->size) {
- unlock_kernel();
+
+ if (new < 0 || new > up->size)
return -EINVAL;
- }
- unlock_kernel();
+
return (file->f_pos = new);
}
--
GitLab
From 1548b13b75a2ec06f46220004e91c37818be6c18 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 23:04:44 +0200
Subject: [PATCH 741/863] usb: gadget: Do not take BKL for gadget->ops->ioctl
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
There is no gadget driver in the tree that
actually implements the ioctl operation, so
obviously it is not necessary to hold the
BKL around the call.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Michał Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/f_fs.c | 2 --
drivers/usb/gadget/inode.c | 6 ++----
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 2aaa0f75c6cf7..c51c21314076a 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -714,9 +714,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
struct ffs_function *func = ffs->func;
ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
} else if (gadget->ops->ioctl) {
- lock_kernel();
ret = gadget->ops->ioctl(gadget, code, value);
- unlock_kernel();
} else {
ret = -ENOTTY;
}
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 63fc171c0ed97..fc35406fc80c3 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1299,11 +1299,9 @@ static long dev_ioctl (struct file *fd, unsigned code, unsigned long value)
struct usb_gadget *gadget = dev->gadget;
long ret = -ENOTTY;
- if (gadget->ops->ioctl) {
- lock_kernel();
+ if (gadget->ops->ioctl)
ret = gadget->ops->ioctl (gadget, code, value);
- unlock_kernel();
- }
+
return ret;
}
--
GitLab
From 3b759c75febd8f9ce91a05705ec43eb7f4b5ed3d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 1 Jun 2010 23:04:45 +0200
Subject: [PATCH 742/863] USB: mon: kill BKL usage
compat_ioctl does not use the BKL, so I assume that
the native function does not need it either.
The open function is already protected by the
driver's mutex, the BKL is probably not needed
here either.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/mon/mon_bin.c | 22 ++--------------------
1 file changed, 2 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 61c76b13f0f18..1be0b9f933662 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -646,17 +646,14 @@ static int mon_bin_open(struct inode *inode, struct file *file)
size_t size;
int rc;
- lock_kernel();
mutex_lock(&mon_lock);
if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) {
mutex_unlock(&mon_lock);
- unlock_kernel();
return -ENODEV;
}
if (mbus != &mon_bus0 && mbus->u_bus == NULL) {
printk(KERN_ERR TAG ": consistency error on open\n");
mutex_unlock(&mon_lock);
- unlock_kernel();
return -ENODEV;
}
@@ -689,7 +686,6 @@ static int mon_bin_open(struct inode *inode, struct file *file)
file->private_data = rp;
mutex_unlock(&mon_lock);
- unlock_kernel();
return 0;
err_allocbuff:
@@ -698,7 +694,6 @@ static int mon_bin_open(struct inode *inode, struct file *file)
kfree(rp);
err_alloc:
mutex_unlock(&mon_lock);
- unlock_kernel();
return rc;
}
@@ -954,7 +949,7 @@ static int mon_bin_queued(struct mon_reader_bin *rp)
/*
*/
-static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct mon_reader_bin *rp = file->private_data;
// struct mon_bus* mbus = rp->r.m_bus;
@@ -1094,19 +1089,6 @@ static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return ret;
}
-static long mon_bin_unlocked_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret;
-
- lock_kernel();
- ret = mon_bin_ioctl(file, cmd, arg);
- unlock_kernel();
-
- return ret;
-}
-
-
#ifdef CONFIG_COMPAT
static long mon_bin_compat_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
@@ -1250,7 +1232,7 @@ static const struct file_operations mon_fops_binary = {
.read = mon_bin_read,
/* .write = mon_text_write, */
.poll = mon_bin_poll,
- .unlocked_ioctl = mon_bin_unlocked_ioctl,
+ .unlocked_ioctl = mon_bin_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = mon_bin_compat_ioctl,
#endif
--
GitLab
From 26eca10e6ef64e15f250523a1e7e94ad40ac2bf8 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Wed, 16 Jun 2010 12:07:56 +0200
Subject: [PATCH 743/863] USB: gadget: g_mass_storage: static data instead of
dynamic allocation
This patch changes msg_do_config() function so that it uses
a static object for a fsg_common structure instead of dynamically
allocated. This is a micro-optimisation.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/mass_storage.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 705cc1f76327c..e68c00e087659 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -143,7 +143,9 @@ static int msg_thread_exits(struct fsg_common *common)
static int __init msg_do_config(struct usb_configuration *c)
{
- struct fsg_common *common;
+ static struct fsg_common common;
+
+ struct fsg_common *retp;
struct fsg_config config;
int ret;
@@ -154,12 +156,13 @@ static int __init msg_do_config(struct usb_configuration *c)
fsg_config_from_params(&config, &mod_data);
config.thread_exits = msg_thread_exits;
- common = fsg_common_init(0, c->cdev, &config);
- if (IS_ERR(common))
- return PTR_ERR(common);
- ret = fsg_add(c->cdev, c, common);
- fsg_common_put(common);
+ retp = fsg_common_init(&common, c->cdev, &config);
+ if (IS_ERR(retp))
+ return PTR_ERR(retp);
+
+ ret = fsg_add(c->cdev, c, &common);
+ fsg_common_put(&common);
return ret;
}
--
GitLab
From 1dc90985d1b29275607ddac59555199e7894f633 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Wed, 16 Jun 2010 12:07:57 +0200
Subject: [PATCH 744/863] USB: gadget: f_mass_storage: fsg_add() renamed to
fsg_bind_config()
Mass Storage Function had a bit unique name for function
used to add it to USB configuration. Renamed as to match
naming convention of other functions.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/f_mass_storage.c | 13 ++++++++++---
drivers/usb/gadget/mass_storage.c | 2 +-
drivers/usb/gadget/multi.c | 4 ++--
3 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 4ce899c9b1653..8a95ebc7e3d3e 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2990,9 +2990,9 @@ static struct usb_gadget_strings *fsg_strings_array[] = {
NULL,
};
-static int fsg_add(struct usb_composite_dev *cdev,
- struct usb_configuration *c,
- struct fsg_common *common)
+static int fsg_bind_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct fsg_common *common)
{
struct fsg_dev *fsg;
int rc;
@@ -3024,6 +3024,13 @@ static int fsg_add(struct usb_composite_dev *cdev,
return rc;
}
+static inline int __deprecated __maybe_unused
+fsg_add(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct fsg_common *common)
+{
+ return fsg_bind_config(cdev, c, common);
+}
/************************* Module parameters *************************/
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index e68c00e087659..2b11e20798234 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -161,7 +161,7 @@ static int __init msg_do_config(struct usb_configuration *c)
if (IS_ERR(retp))
return PTR_ERR(retp);
- ret = fsg_add(c->cdev, c, &common);
+ ret = fsg_bind_config(c->cdev, c, &common);
fsg_common_put(&common);
return ret;
}
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index a930d7fd7e7a5..d3d3140330226 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -172,7 +172,7 @@ static int __init rndis_do_config(struct usb_configuration *c)
if (ret < 0)
return ret;
- ret = fsg_add(c->cdev, c, fsg_common);
+ ret = fsg_bind_config(c->cdev, c, fsg_common);
if (ret < 0)
return ret;
@@ -208,7 +208,7 @@ static int __init cdc_do_config(struct usb_configuration *c)
if (ret < 0)
return ret;
- ret = fsg_add(c->cdev, c, fsg_common);
+ ret = fsg_bind_config(c->cdev, c, fsg_common);
if (ret < 0)
return ret;
--
GitLab
From 7898aee1dacbb246fee958f0a6102320b61768d9 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Wed, 16 Jun 2010 12:07:58 +0200
Subject: [PATCH 745/863] USB: gadget: f_fs: functionfs_add() renamed to
functionfs_bind_config()
FunctionFS had a bit unique name for function used to add it
to USB configuration. Renamed as to match naming convention
of other functions.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/f_fs.c | 6 +++---
drivers/usb/gadget/g_ffs.c | 2 +-
include/linux/usb/functionfs.h | 6 +++---
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index c51c21314076a..282b49e336bef 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1478,9 +1478,9 @@ static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
}
-static int functionfs_add(struct usb_composite_dev *cdev,
- struct usb_configuration *c,
- struct ffs_data *ffs)
+static int functionfs_bind_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct ffs_data *ffs)
{
struct ffs_function *func;
int ret;
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index d1af253a91059..da3a9e403497a 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -388,7 +388,7 @@ static int __gfs_do_config(struct usb_configuration *c,
return ret;
}
- ret = functionfs_add(c->cdev, c, gfs_ffs_data);
+ ret = functionfs_bind_config(c->cdev, c, gfs_ffs_data);
if (unlikely(ret < 0))
return ret;
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index a34a2a043b21d..6f649c13193b6 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -180,9 +180,9 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
static void functionfs_unbind(struct ffs_data *ffs)
__attribute__((nonnull));
-static int functionfs_add(struct usb_composite_dev *cdev,
- struct usb_configuration *c,
- struct ffs_data *ffs)
+static int functionfs_bind_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct ffs_data *ffs)
__attribute__((warn_unused_result, nonnull));
--
GitLab
From f2adc4f8aaf272de9ac71dcb18d95ebe05fc3f94 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Wed, 16 Jun 2010 12:07:59 +0200
Subject: [PATCH 746/863] USB: gadget: composite: usb_string_ids_*() functions
added
usb_string_ids_tab() and usb_string_ids_n() functions added to
the composite framework. The first accepts an array of
usb_string object and for each registeres a string id and the
second registeres a given number of ids and returns the first.
This may simplify string ids registration since gadgets and
composite functions won't have to call usb_string_id() several
times and each time check for errer status -- all this will be
done with a single call.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/composite.c | 71 ++++++++++++++++++++++++++++++++--
include/linux/usb/composite.h | 4 ++
2 files changed, 71 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 391d169f8d076..125167e17ce53 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -673,20 +673,83 @@ static int get_string(struct usb_composite_dev *cdev,
* string IDs. Drivers for functions, configurations, or gadgets will
* then store that ID in the appropriate descriptors and string table.
*
- * All string identifier should be allocated using this routine, to
- * ensure that for example different functions don't wrongly assign
- * different meanings to the same identifier.
+ * All string identifier should be allocated using this,
+ * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
+ * that for example different functions don't wrongly assign different
+ * meanings to the same identifier.
*/
int usb_string_id(struct usb_composite_dev *cdev)
{
if (cdev->next_string_id < 254) {
- /* string id 0 is reserved */
+ /* string id 0 is reserved by USB spec for list of
+ * supported languages */
+ /* 255 reserved as well? -- mina86 */
cdev->next_string_id++;
return cdev->next_string_id;
}
return -ENODEV;
}
+/**
+ * usb_string_ids() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @str: an array of usb_string objects to assign numbers to
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_ids() is called from bind() callbacks to allocate
+ * string IDs. Drivers for functions, configurations, or gadgets will
+ * then copy IDs from the string table to the appropriate descriptors
+ * and string table for other languages.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
+{
+ int next = cdev->next_string_id;
+
+ for (; str->s; ++str) {
+ if (unlikely(next >= 254))
+ return -ENODEV;
+ str->id = ++next;
+ }
+
+ cdev->next_string_id = next;
+
+ return 0;
+}
+
+/**
+ * usb_string_ids_n() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @n: number of string IDs to allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns the first requested ID. This ID and next @n-1 IDs are now
+ * valid IDs. At least providind that @n is non zore because if it
+ * is, returns last requested ID which is now very useful information.
+ *
+ * @usb_string_ids_n() is called from bind() callbacks to allocate
+ * string IDs. Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
+{
+ unsigned next = c->next_string_id;
+ if (unlikely(n > 254 || (unsigned)next + n > 254))
+ return -ENODEV;
+ c->next_string_id += n;
+ return next + 1;
+}
+
+
/*-------------------------------------------------------------------------*/
static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 139353efad348..f378075c839a6 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -342,6 +342,10 @@ struct usb_composite_dev {
};
extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+ struct usb_string *str);
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
/* messaging utils */
#define DBG(d, fmt, args...) \
--
GitLab
From fd7c9a007f7d45df86974c3f83d67ab21cc21f1f Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Wed, 16 Jun 2010 12:08:00 +0200
Subject: [PATCH 747/863] USB: gadget: f_fs: use usb_string_ids_n()
Use usb_string_ids_n() function to simplify string ids
registeration.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/f_fs.c | 30 ++++++++++++------------------
1 file changed, 12 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 282b49e336bef..e4f5950552088 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1375,7 +1375,8 @@ static void ffs_data_reset(struct ffs_data *ffs)
static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
{
- unsigned i, count;
+ struct usb_gadget_strings **lang;
+ int first_id;
ENTER();
@@ -1383,7 +1384,9 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
|| test_and_set_bit(FFS_FL_BOUND, &ffs->flags)))
return -EBADFD;
- ffs_data_get(ffs);
+ first_id = usb_string_ids_n(cdev, ffs->strings_count);
+ if (unlikely(first_id < 0))
+ return first_id;
ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
if (unlikely(!ffs->ep0req))
@@ -1391,25 +1394,16 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
ffs->ep0req->complete = ffs_ep0_complete;
ffs->ep0req->context = ffs;
- /* Get strings identifiers */
- for (count = ffs->strings_count, i = 0; i < count; ++i) {
- struct usb_gadget_strings **lang;
-
- int id = usb_string_id(cdev);
- if (unlikely(id < 0)) {
- usb_ep_free_request(cdev->gadget->ep0, ffs->ep0req);
- ffs->ep0req = NULL;
- return id;
- }
-
- lang = ffs->stringtabs;
- do {
- (*lang)->strings[i].id = id;
- ++lang;
- } while (*lang);
+ lang = ffs->stringtabs;
+ for (lang = ffs->stringtabs; *lang; ++lang) {
+ struct usb_string *str = (*lang)->strings;
+ int id = first_id;
+ for (; str->s; ++id, ++str)
+ str->id = id;
}
ffs->gadget = cdev->gadget;
+ ffs_data_get(ffs);
return 0;
}
--
GitLab
From 248720529cb50c6b6cf2ec01748049c6b532a8cc Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Fri, 18 Jun 2010 15:59:43 +0200
Subject: [PATCH 748/863] USB: gadget: f_mass_storage: dead code removed
The ep0req_name was never used in f_mass_storage hence it may
be safely removed from the code. It was a leftover from File
Storage Gadget which used it for debug messages.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/f_mass_storage.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 8a95ebc7e3d3e..fa86b946dcd6e 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -333,7 +333,6 @@ struct fsg_common {
struct usb_ep *ep0; /* Copy of gadget->ep0 */
struct usb_request *ep0req; /* Copy of cdev->req */
unsigned int ep0_req_tag;
- const char *ep0req_name;
struct fsg_buffhd *next_buffhd_to_fill;
struct fsg_buffhd *next_buffhd_to_drain;
@@ -623,8 +622,6 @@ static int fsg_setup(struct usb_function *f,
/* Respond with data/status */
req->length = min((u16)1, w_length);
- fsg->common->ep0req_name =
- ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out";
return ep0_queue(fsg->common);
}
--
GitLab
From 279cc49a697d5b4f9477cd68eeb4ef20798400fe Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 21 Jun 2010 13:57:03 +0200
Subject: [PATCH 749/863] USB: gadget: g_multi: code clean up and refactoring
The Multifunction Composite Gadget have been cleaned up
and refactored so hopefully it looks prettier and works
at least as good as before changes.
A Kconfig has also been fixed to make it impossible to build
FunctionFS gadget with no configurations. With this patch, if
RNDIS is not chosen by the user CDC is force-selected.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/Kconfig | 1 +
drivers/usb/gadget/multi.c | 262 +++++++++++++++++++++----------------
2 files changed, 147 insertions(+), 116 deletions(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 591ae9fde1993..027f61b1f3d82 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -863,6 +863,7 @@ config USB_G_NOKIA
config USB_G_MULTI
tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
depends on BLOCK && NET
+ select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
help
The Multifunction Composite Gadget provides Ethernet (RNDIS
and/or CDC Ethernet), mass storage and ACM serial link
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index d3d3140330226..795d762321676 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -24,6 +24,7 @@
#include <linux/kernel.h>
#include <linux/utsname.h>
+#include <linux/module.h>
#if defined USB_ETH_RNDIS
@@ -35,14 +36,13 @@
#define DRIVER_DESC "Multifunction Composite Gadget"
-#define DRIVER_VERSION "2009/07/21"
-/*-------------------------------------------------------------------------*/
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Michal Nazarewicz");
+MODULE_LICENSE("GPL");
-#define MULTI_VENDOR_NUM 0x0525 /* XXX NetChip */
-#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */
-/*-------------------------------------------------------------------------*/
+/***************************** All the files... *****************************/
/*
* kbuild is not very cooperative with respect to linking separately
@@ -57,6 +57,8 @@
#include "config.c"
#include "epautoconf.c"
+#include "f_mass_storage.c"
+
#include "u_serial.c"
#include "f_acm.c"
@@ -68,13 +70,24 @@
#endif
#include "u_ether.c"
-#undef DBG /* u_ether.c has broken idea about macros */
-#undef VDBG /* so clean up after it */
-#undef ERROR
-#undef INFO
-#include "f_mass_storage.c"
-/*-------------------------------------------------------------------------*/
+
+/***************************** Device Descriptor ****************************/
+
+#define MULTI_VENDOR_NUM 0x0525 /* XXX NetChip */
+#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */
+
+
+enum {
+ __MULTI_NO_CONFIG,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+ MULTI_RNDIS_CONFIG_NUM,
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+ MULTI_CDC_CONFIG_NUM,
+#endif
+};
+
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
@@ -82,80 +95,82 @@ static struct usb_device_descriptor device_desc = {
.bcdUSB = cpu_to_le16(0x0200),
- /* .bDeviceClass = USB_CLASS_COMM, */
- /* .bDeviceSubClass = 0, */
- /* .bDeviceProtocol = 0, */
- .bDeviceClass = 0xEF,
+ .bDeviceClass = USB_CLASS_MISC /* 0xEF */,
.bDeviceSubClass = 2,
.bDeviceProtocol = 1,
- /* .bMaxPacketSize0 = f(hardware) */
/* Vendor and product id can be overridden by module parameters. */
.idVendor = cpu_to_le16(MULTI_VENDOR_NUM),
.idProduct = cpu_to_le16(MULTI_PRODUCT_NUM),
- /* .bcdDevice = f(hardware) */
- /* .iManufacturer = DYNAMIC */
- /* .iProduct = DYNAMIC */
- /* NO SERIAL NUMBER */
- .bNumConfigurations = 1,
};
-static struct usb_otg_descriptor otg_descriptor = {
- .bLength = sizeof otg_descriptor,
- .bDescriptorType = USB_DT_OTG,
-
- /* REVISIT SRP-only hardware is possible, although
- * it would not be called "OTG" ...
- */
- .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
-};
static const struct usb_descriptor_header *otg_desc[] = {
- (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &(struct usb_otg_descriptor){
+ .bLength = sizeof(struct usb_otg_descriptor),
+ .bDescriptorType = USB_DT_OTG,
+
+ /*
+ * REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
+ },
NULL,
};
-/* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX 0
-#define STRING_PRODUCT_IDX 1
+enum {
+ MULTI_STRING_MANUFACTURER_IDX,
+ MULTI_STRING_PRODUCT_IDX,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+ MULTI_STRING_RNDIS_CONFIG_IDX,
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+ MULTI_STRING_CDC_CONFIG_IDX,
+#endif
+};
static char manufacturer[50];
static struct usb_string strings_dev[] = {
- [STRING_MANUFACTURER_IDX].s = manufacturer,
- [STRING_PRODUCT_IDX].s = DRIVER_DESC,
+ [MULTI_STRING_MANUFACTURER_IDX].s = manufacturer,
+ [MULTI_STRING_PRODUCT_IDX].s = DRIVER_DESC,
+#ifdef CONFIG_USB_G_MULTI_RNDIS
+ [MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+ [MULTI_STRING_CDC_CONFIG_IDX].s = "Multifunction with CDC ECM",
+#endif
{ } /* end of list */
};
-static struct usb_gadget_strings stringtab_dev = {
- .language = 0x0409, /* en-us */
- .strings = strings_dev,
-};
-
static struct usb_gadget_strings *dev_strings[] = {
- &stringtab_dev,
+ &(struct usb_gadget_strings){
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
+ },
NULL,
};
-static u8 hostaddr[ETH_ALEN];
/****************************** Configurations ******************************/
-static struct fsg_module_parameters mod_data = {
- .stall = 1
-};
-FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+static struct fsg_common fsg_common;
+
+static u8 hostaddr[ETH_ALEN];
-static struct fsg_common *fsg_common;
+/********** RNDIS **********/
#ifdef USB_ETH_RNDIS
-static int __init rndis_do_config(struct usb_configuration *c)
+static __ref int rndis_do_config(struct usb_configuration *c)
{
int ret;
@@ -172,26 +187,42 @@ static int __init rndis_do_config(struct usb_configuration *c)
if (ret < 0)
return ret;
- ret = fsg_bind_config(c->cdev, c, fsg_common);
+ ret = fsg_bind_config(c->cdev, c, &fsg_common);
if (ret < 0)
return ret;
return 0;
}
-static struct usb_configuration rndis_config_driver = {
- .label = "Multifunction Composite (RNDIS + MS + ACM)",
- .bind = rndis_do_config,
- .bConfigurationValue = 2,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+ static struct usb_configuration config = {
+ .bind = rndis_do_config,
+ .bConfigurationValue = MULTI_RNDIS_CONFIG_NUM,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ };
+
+ config.label = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].s;
+ config.iConfiguration = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].id;
+
+ return usb_add_config(cdev, &config);
+}
+
+#else
+
+static int rndis_config_register(struct usb_composite_dev *cdev)
+{
+ return 0;
+}
#endif
+
+/********** CDC ECM **********/
+
#ifdef CONFIG_USB_G_MULTI_CDC
-static int __init cdc_do_config(struct usb_configuration *c)
+static __ref int cdc_do_config(struct usb_configuration *c)
{
int ret;
@@ -208,20 +239,33 @@ static int __init cdc_do_config(struct usb_configuration *c)
if (ret < 0)
return ret;
- ret = fsg_bind_config(c->cdev, c, fsg_common);
+ ret = fsg_bind_config(c->cdev, c, &fsg_common);
if (ret < 0)
return ret;
return 0;
}
-static struct usb_configuration cdc_config_driver = {
- .label = "Multifunction Composite (CDC + MS + ACM)",
- .bind = cdc_do_config,
- .bConfigurationValue = 1,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+ static struct usb_configuration config = {
+ .bind = cdc_do_config,
+ .bConfigurationValue = MULTI_CDC_CONFIG_NUM,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ };
+
+ config.label = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].s;
+ config.iConfiguration = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].id;
+
+ return usb_add_config(cdev, &config);
+}
+
+#else
+
+static int cdc_config_register(struct usb_composite_dev *cdev)
+{
+ return 0;
+}
#endif
@@ -230,7 +274,7 @@ static struct usb_configuration cdc_config_driver = {
/****************************** Gadget Bind ******************************/
-static int __init multi_bind(struct usb_composite_dev *cdev)
+static int __ref multi_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
int status, gcnum;
@@ -252,67 +296,56 @@ static int __init multi_bind(struct usb_composite_dev *cdev)
goto fail0;
/* set up mass storage function */
- fsg_common = fsg_common_from_params(0, cdev, &mod_data);
- if (IS_ERR(fsg_common)) {
- status = PTR_ERR(fsg_common);
- goto fail1;
+ {
+ void *retp;
+ retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
+ if (IS_ERR(retp)) {
+ status = PTR_ERR(retp);
+ goto fail1;
+ }
}
-
+ /* set bcdDevice */
gcnum = usb_gadget_controller_number(gadget);
- if (gcnum >= 0)
+ if (gcnum >= 0) {
device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
- else {
- /* We assume that can_support_ecm() tells the truth;
- * but if the controller isn't recognized at all then
- * that assumption is a bit more likely to be wrong.
- */
- WARNING(cdev, "controller '%s' not recognized\n",
- gadget->name);
+ } else {
+ WARNING(cdev, "controller '%s' not recognized\n", gadget->name);
device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
}
-
- /* Allocate string descriptor numbers ... note that string
- * contents can be overridden by the composite_dev glue.
- */
-
- /* device descriptor strings: manufacturer, product */
+ /* allocate string descriptor numbers */
snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
- status = usb_string_id(cdev);
- if (status < 0)
- goto fail2;
- strings_dev[STRING_MANUFACTURER_IDX].id = status;
- device_desc.iManufacturer = status;
- status = usb_string_id(cdev);
- if (status < 0)
+ status = usb_string_ids_tab(cdev, strings_dev);
+ if (unlikely(status < 0))
goto fail2;
- strings_dev[STRING_PRODUCT_IDX].id = status;
- device_desc.iProduct = status;
-#ifdef USB_ETH_RNDIS
- /* register our first configuration */
- status = usb_add_config(cdev, &rndis_config_driver);
- if (status < 0)
+ device_desc.iManufacturer =
+ strings_dev[MULTI_STRING_MANUFACTURER_IDX].id;
+ device_desc.iProduct =
+ strings_dev[MULTI_STRING_PRODUCT_IDX].id;
+
+ /* register configurations */
+ status = rndis_config_register(cdev);
+ if (unlikely(status < 0))
goto fail2;
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
- /* register our second configuration */
- status = usb_add_config(cdev, &cdc_config_driver);
- if (status < 0)
+ status = cdc_config_register(cdev);
+ if (unlikely(status < 0))
goto fail2;
-#endif
- dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
- fsg_common_put(fsg_common);
+ /* we're done */
+ dev_info(&gadget->dev, DRIVER_DESC "\n");
+ fsg_common_put(&fsg_common);
return 0;
+
+ /* error recovery */
fail2:
- fsg_common_put(fsg_common);
+ fsg_common_put(&fsg_common);
fail1:
gserial_cleanup();
fail0:
@@ -339,18 +372,15 @@ static struct usb_composite_driver multi_driver = {
.unbind = __exit_p(multi_unbind),
};
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Michal Nazarewicz");
-MODULE_LICENSE("GPL");
-static int __init g_multi_init(void)
+static int __init multi_init(void)
{
return usb_composite_register(&multi_driver);
}
-module_init(g_multi_init);
+module_init(multi_init);
-static void __exit g_multi_cleanup(void)
+static void __exit multi_exit(void)
{
usb_composite_unregister(&multi_driver);
}
-module_exit(g_multi_cleanup);
+module_exit(multi_exit);
--
GitLab
From 90eef5b8acb459da65b269cf1db9f92debda1a24 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 21 Jun 2010 13:57:05 +0200
Subject: [PATCH 750/863] USB: gadget: g_ether: updated INF file
Updated the INF file for the g_ether gadget. It should work with most
recent Windows systems now.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
Documentation/usb/linux.inf | 228 ++++++++----------------------------
1 file changed, 47 insertions(+), 181 deletions(-)
diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf
index ebd02be803244..b9e538c196f74 100644
--- a/Documentation/usb/linux.inf
+++ b/Documentation/usb/linux.inf
@@ -1,200 +1,66 @@
-; MS-Windows driver config matching some basic modes of the
-; Linux-USB Ethernet/RNDIS gadget firmware:
-;
-; - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
-; cable modem profile, and supports most non-Microsoft USB hosts
-;
-; - RNDIS plus CDC Subset ... used by hardware that incapable of
-; full CDC Ethernet support.
-;
-; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
-; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
-; http://www.microsoft.com/whdc/device/network/ndis/rmndis.mspx
-
+; Based on template INF file found at
+; <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
+; which was:
+; Copyright (c) Microsoft Corporation
+; and released under the MLPL as found at:
+; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
[Version]
-Signature = "$CHICAGO$"
+Signature = "$Windows NT$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Linux%
-Compatible = 1
-MillenniumPreferred = .ME
-DriverVer = 03/30/2004,0.0.0.0
-; catalog file would be used by WHQL
-;CatalogFile = Linux.cat
+DriverVer = 06/21/2006,6.0.6000.16384
[Manufacturer]
-%Linux% = LinuxDevices,NT.5.1
+%Linux% = LinuxDevices,NTx86,NTamd64,NTia64
+
+; Decoration for x86 architecture
+[LinuxDevices.NTx86]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
-[LinuxDevices]
-; NetChip IDs, used by both firmware modes
-%LinuxDevice% = RNDIS, USB\VID_0525&PID_a4a2
+; Decoration for x64 architecture
+[LinuxDevices.NTamd64]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
-[LinuxDevices.NT.5.1]
-%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+; Decoration for ia64 architecture
+[LinuxDevices.NTia64]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+;@@@ This is the common setting for setup
[ControlFlags]
ExcludeFromSelect=*
-; Windows 98, Windows 98 Second Edition specific sections --------
-
-[RNDIS]
-DeviceID = usb8023
-MaxInstance = 512
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_98, RNDIS_AddReg_Common
-
-[RNDIS_AddReg_98]
-HKR, , DevLoader, 0, *ndis
-HKR, , DeviceVxDs, 0, usb8023.sys
-HKR, NDIS, LogDriverName, 0, "usb8023"
-HKR, NDIS, MajorNdisVersion, 1, 5
-HKR, NDIS, MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_98"
-HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_98"
-HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_98"
-HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_98]
-CopyFiles=RNDIS_CopyFiles_98
-
-[RNDIS_CopyFiles_98]
-usb8023.sys, usb8023w.sys, , 0
-rndismp.sys, rndismpw.sys, , 0
-
-; Windows Millennium Edition specific sections --------------------
-
-[RNDIS.ME]
-DeviceID = usb8023
-MaxInstance = 512
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_ME, RNDIS_AddReg_Common
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-
-[RNDIS_AddReg_ME]
-HKR, , DevLoader, 0, *ndis
-HKR, , DeviceVxDs, 0, usb8023.sys
-HKR, NDIS, LogDriverName, 0, "usb8023"
-HKR, NDIS, MajorNdisVersion, 1, 5
-HKR, NDIS, MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_ME"
-HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_ME"
-HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_ME"
-HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_ME]
-CopyFiles=RNDIS_CopyFiles_ME
-
-[RNDIS_CopyFiles_ME]
-usb8023.sys, usb8023m.sys, , 0
-rndismp.sys, rndismpm.sys, , 0
-
-; Windows 2000 specific sections ---------------------------------
-
-[RNDIS.NT]
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-CopyFiles = RNDIS_CopyFiles_NT
-
-[RNDIS.NT.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
-
-[RNDIS_CopyFiles_NT]
-; no rename of files on Windows 2000, use the 'k' names as is
-usb8023k.sys, , , 0
-rndismpk.sys, , , 0
-
-[RNDIS_ServiceInst_NT]
-DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023k.sys
-LoadOrderGroup = NDIS
-AddReg = RNDIS_WMI_AddReg_NT
-
-[RNDIS_WMI_AddReg_NT]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
-
-; Windows XP specific sections -----------------------------------
-
+; DDInstall section
+; References the in-build Netrndis.inf
[RNDIS.NT.5.1]
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-; no copyfiles - the files are already in place
-
+Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType = 15
+; NEVER REMOVE THE FOLLOWING REFERENCE FOR NETRNDIS.INF
+include = netrndis.inf
+needs = Usb_Rndis.ndi
+AddReg = Rndis_AddReg_Vista
+
+; DDInstal.Services section
[RNDIS.NT.5.1.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
-
-[RNDIS_ServiceInst_51]
-DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023.sys
-LoadOrderGroup = NDIS
-AddReg = RNDIS_WMI_AddReg_51
-
-[RNDIS_WMI_AddReg_51]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
-
-; Windows 2000 and Windows XP common sections --------------------
-
-[RNDIS_AddReg_NT]
-HKR, Ndi, Service, 0, "USB_RNDIS"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-
-[RNDIS_EventLog]
-AddReg = RNDIS_EventLog_AddReg
-
-[RNDIS_EventLog_AddReg]
-HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
-HKR, , TypesSupported, 0x00010001, 7
-
-; Common Sections -------------------------------------------------
-
-[RNDIS_AddReg_Common]
-HKR, NDI\params\NetworkAddress, ParamDesc, 0, %NetworkAddress%
-HKR, NDI\params\NetworkAddress, type, 0, "edit"
-HKR, NDI\params\NetworkAddress, LimitText, 0, "12"
-HKR, NDI\params\NetworkAddress, UpperCase, 0, "1"
-HKR, NDI\params\NetworkAddress, default, 0, " "
-HKR, NDI\params\NetworkAddress, optional, 0, "1"
-
-[SourceDisksNames]
-1=%SourceDisk%,,1
-
-[SourceDisksFiles]
-usb8023m.sys=1
-rndismpm.sys=1
-usb8023w.sys=1
-rndismpw.sys=1
-usb8023k.sys=1
-rndismpk.sys=1
-
-[DestinationDirs]
-RNDIS_CopyFiles_98 = 10, system32/drivers
-RNDIS_CopyFiles_ME = 10, system32/drivers
-RNDIS_CopyFiles_NT = 12
+include = netrndis.inf
+needs = Usb_Rndis.ndi.Services
+
+; Optional registry settings. You can modify as needed.
+[RNDIS_AddReg_Vista]
+HKR, NDI\params\VistaProperty, ParamDesc, 0, %Vista_Property%
+HKR, NDI\params\VistaProperty, type, 0, "edit"
+HKR, NDI\params\VistaProperty, LimitText, 0, "12"
+HKR, NDI\params\VistaProperty, UpperCase, 0, "1"
+HKR, NDI\params\VistaProperty, default, 0, " "
+HKR, NDI\params\VistaProperty, optional, 0, "1"
+
+; No sys copyfiles - the sys files are already in-build
+; (part of the operating system).
+; We do not support XP SP1-, 2003 SP1-, ME, 9x.
[Strings]
-ServiceDisplayName = "USB Remote NDIS Network Device Driver"
-NetworkAddress = "Network Address"
Linux = "Linux Developer Community"
LinuxDevice = "Linux USB Ethernet/RNDIS Gadget"
-SourceDisk = "Ethernet/RNDIS Gadget Driver Install Disk"
-
+Vista_Property = "Optional Vista Property"
--
GitLab
From e41e134e34fbbfc7868f4784cd1370847462b879 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 21 Jun 2010 13:57:06 +0200
Subject: [PATCH 751/863] USB: gadget: g_serial: INF file updated
Updated the INF file for g_serial gadget. It should work with
most recent Windows systems now.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
Documentation/usb/gadget_serial.txt | 87 +++-------------------
Documentation/usb/linux-cdc-acm.inf | 107 ++++++++++++++++++++++++++++
2 files changed, 117 insertions(+), 77 deletions(-)
create mode 100644 Documentation/usb/linux-cdc-acm.inf
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index eac7df94d8e3b..61e67f6a20a07 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -151,88 +151,23 @@ instructions below to install the host side driver.
Installing the Windows Host ACM Driver
--------------------------------------
-To use the Windows ACM driver you must have the files "gserial.inf"
-and "usbser.sys" together in a folder on the Windows machine.
-
-The "gserial.inf" file is given here.
-
--------------------- CUT HERE --------------------
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%LINUX%
-DriverVer=08/17/2004,0.0.2.0
-; Copyright (C) 2004 Al Borchers (alborchers@steinerpoint.com)
-
-[Manufacturer]
-%LINUX%=GSerialDeviceList
-
-[GSerialDeviceList]
-%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4A7
-
-[DestinationDirs]
-DefaultDestDir=10,System32\Drivers
-
-[GSerialInstall]
-CopyFiles=GSerialCopyFiles
-AddReg=GSerialAddReg
-
-[GSerialCopyFiles]
-usbser.sys
-
-[GSerialAddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,usbser.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[GSerialInstall.Services]
-AddService = usbser,0x0002,GSerialService
-
-[GSerialService]
-DisplayName = %GSERIAL_DISPLAY_NAME%
-ServiceType = 1 ; SERVICE_KERNEL_DRIVER
-StartType = 3 ; SERVICE_DEMAND_START
-ErrorControl = 1 ; SERVICE_ERROR_NORMAL
-ServiceBinary = %10%\System32\Drivers\usbser.sys
-LoadOrderGroup = Base
-
-[Strings]
-LINUX = "Linux"
-GSERIAL = "Gadget Serial"
-GSERIAL_DISPLAY_NAME = "USB Gadget Serial Driver"
--------------------- CUT HERE --------------------
-
-The "usbser.sys" file comes with various versions of Windows.
-For example, it can be found on Windows XP typically in
-
- C:\WINDOWS\Driver Cache\i386\driver.cab
-
-Or it can be found on the Windows 98SE CD in the "win98" folder
-in the "DRIVER11.CAB" through "DRIVER20.CAB" cab files. You will
-need the DOS "expand" program, the Cygwin "cabextract" program, or
-a similar program to unpack these cab files and extract "usbser.sys".
-
-For example, to extract "usbser.sys" into the current directory
-on Windows XP, open a DOS window and run a command like
-
- expand C:\WINDOWS\Driver~1\i386\driver.cab -F:usbser.sys .
-
-(Thanks to Nishant Kamat for pointing out this DOS command.)
+To use the Windows ACM driver you must have the "linux-cdc-acm.inf"
+file (provided along this document) which supports all recent versions
+of Windows.
When the gadget serial driver is loaded and the USB device connected
to the Windows host with a USB cable, Windows should recognize the
gadget serial device and ask for a driver. Tell Windows to find the
-driver in the folder that contains "gserial.inf" and "usbser.sys".
+driver in the folder that contains the "linux-cdc-acm.inf" file.
For example, on Windows XP, when the gadget serial device is first
plugged in, the "Found New Hardware Wizard" starts up. Select
-"Install from a list or specific location (Advanced)", then on
-the next screen select "Include this location in the search" and
-enter the path or browse to the folder containing "gserial.inf" and
-"usbser.sys". Windows will complain that the Gadget Serial driver
-has not passed Windows Logo testing, but select "Continue anyway"
-and finish the driver installation.
+"Install from a list or specific location (Advanced)", then on the
+next screen select "Include this location in the search" and enter the
+path or browse to the folder containing the "linux-cdc-acm.inf" file.
+Windows will complain that the Gadget Serial driver has not passed
+Windows Logo testing, but select "Continue anyway" and finish the
+driver installation.
On Windows XP, in the "Device Manager" (under "Control Panel",
"System", "Hardware") expand the "Ports (COM & LPT)" entry and you
@@ -345,5 +280,3 @@ you should be able to send data back and forth between the gadget
side and host side systems. Anything you type on the terminal
window on the gadget side should appear in the terminal window on
the host side and vice versa.
-
-
diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf
new file mode 100644
index 0000000000000..14d2b879f0fbb
--- /dev/null
+++ b/Documentation/usb/linux-cdc-acm.inf
@@ -0,0 +1,107 @@
+; Windows USB CDC ACM Setup File
+
+; Based on INF template which was:
+; Copyright (c) 2000 Microsoft Corporation
+; Copyright (c) 2007 Microchip Technology Inc.
+; likely to be covered by the MLPL as found at:
+; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%Linux%
+DriverVer=11/15/2007,5.1.2600.0
+
+[Manufacturer]
+%Linux%=DeviceList, NTamd64
+
+[DestinationDirs]
+DefaultDestDir=12
+
+
+;------------------------------------------------------------------------------
+; Windows 2000/XP/Vista-32bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.nt]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.nt
+AddReg=DriverInstall.nt.AddReg
+
+[DriverCopyFiles.nt]
+usbser.sys,,,0x20
+
+[DriverInstall.nt.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.nt.Services]
+AddService=usbser, 0x00000002, DriverService.nt
+
+[DriverService.nt]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+;------------------------------------------------------------------------------
+; Vista-64bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.NTamd64]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.NTamd64
+AddReg=DriverInstall.NTamd64.AddReg
+
+[DriverCopyFiles.NTamd64]
+USBSER.sys,,,0x20
+
+[DriverInstall.NTamd64.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.NTamd64.Services]
+AddService=usbser, 0x00000002, DriverService.NTamd64
+
+[DriverService.NTamd64]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+
+;------------------------------------------------------------------------------
+; Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID. Use the format as shown
+; below.
+; Note: One INF file can be used for multiple devices with different
+; VID and PIDs. For each supported device, append
+; ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[SourceDisksFiles]
+[SourceDisksNames]
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7
+
+
+;------------------------------------------------------------------------------
+; String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+Linux = "Linux Developer Community"
+DESCRIPTION = "Gadget Serial"
+SERVICE = "USB RS-232 Emulation Driver"
--
GitLab
From c7ba692294ef2f69a76b24b2ad45fc6c0ac0d497 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 21 Jun 2010 13:57:07 +0200
Subject: [PATCH 752/863] USB: gadget: g_multi: added documentation and INF
files
A short documentation of the g_multi driver along with INF
files for Windows XP SP3 are provided.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
Documentation/usb/gadget_multi.txt | 150 ++++++++++++++++++++++++++++
Documentation/usb/linux-cdc-acm.inf | 4 +-
Documentation/usb/linux.inf | 6 +-
3 files changed, 155 insertions(+), 5 deletions(-)
create mode 100644 Documentation/usb/gadget_multi.txt
diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt
new file mode 100644
index 0000000000000..80f4ef0eb75bd
--- /dev/null
+++ b/Documentation/usb/gadget_multi.txt
@@ -0,0 +1,150 @@
+ -*- org -*-
+
+* Overview
+
+The Multifunction Composite Gadget (or g_multi) is a composite gadget
+that makes extensive use of the composite framework to provide
+a... multifunction gadget.
+
+In it's standard configuration it provides a single USB configuration
+with RNDIS[1] (that is Ethernet), USB CDC[2] ACM (that is serial) and
+USB Mass Storage functions.
+
+A CDC ECM (Ethernet) function may be turned on via a Kconfig option
+and RNDIS can be turned off. If they are both enabled the gadget will
+have two configurations -- one with RNDIS and another with CDC ECM[3].
+
+Please not that if you use non-standard configuration (that is enable
+CDC ECM) you may need to change vendor and/or product ID.
+
+* Host drivers
+
+To make use of the gadget one needs to make it work on host side --
+without that there's no hope of achieving anything with the gadget.
+As one might expect, things one need to do very from system to system.
+
+** Linux host drivers
+
+Since the gadget uses standard composite framework and appears as such
+to Linux host it does not need any additional drivers on Linux host
+side. All the functions are handled by respective drivers developed
+for them.
+
+This is also true for two configuration set-up with RNDIS
+configuration being the first one. Linux host will use the second
+configuration with CDC ECM which should work better under Linux.
+
+** Windows host drivers
+
+For the gadget two work under Windows two conditions have to be met:
+
+*** Detecting as composite gadget
+
+First of all, Windows need to detect the gadget as an USB composite
+gadget which on its own have some conditions[4]. If they are met,
+Windows lets USB Generic Parent Driver[5] handle the device which then
+tries to much drivers for each individual interface (sort of, don't
+get into too many details).
+
+The good news is: you do not have to worry about most of the
+conditions!
+
+The only thing to worry is that the gadget has to have a single
+configuration so a dual RNDIS and CDC ECM gadget won't work unless you
+create a proper INF -- and of course, if you do submit it!
+
+*** Installing drivers for each function
+
+The other, trickier thing is making Windows install drivers for each
+individual function.
+
+For mass storage it is trivial since Windows detect it's an interface
+implementing USB Mass Storage class and selects appropriate driver.
+
+Things are harder with RDNIS and CDC ACM.
+
+**** RNDIS
+
+To make Windows select RNDIS drivers for the first function in the
+gadget, one needs to use the [[file:linux.inf]] file provided with this
+document. It "attaches" Window's RNDIS driver to the first interface
+of the gadget.
+
+Please note, that while testing we encountered some issues[6] when
+RNDIS was not the first interface. You do not need to worry abut it
+unless you are trying to develop your own gadget in which case watch
+out for this bug.
+
+**** CDC ACM
+
+Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM.
+
+**** Customising the gadget
+
+If you intend to hack the g_multi gadget be advised that rearranging
+functions will obviously change interface numbers for each of the
+functionality. As an effect provided INFs won't work since they have
+interface numbers hard-coded in them (it's not hard to change those
+though[7]).
+
+This also means, that after experimenting with g_multi and changing
+provided functions one should change gadget's vendor and/or product ID
+so there will be no collision with other customised gadgets or the
+original gadget.
+
+Failing to comply may cause brain damage after wondering for hours why
+things don't work as intended before realising Windows have cached
+some drivers information (changing USB port may sometimes help plus
+you might try using USBDeview[8] to remove the phantom device).
+
+**** INF testing
+
+Provided INF files have been tested on Windows XP SP3, Windows Vista
+and Windows 7, all 32-bit versions. It should work on 64-bit versions
+as well. It most likely won't work on Windows prior to Windows XP
+SP2.
+
+** Other systems
+
+At this moment, drivers for any other systems have not been tested.
+Knowing how MacOS is based on BSD and BSD is an Open Source it is
+believed that it should (read: "I have no idea whether it will") work
+out-of-the-box.
+
+For more exotic systems I have even less to say...
+
+Any testing and drivers *are* *welcome*!
+
+* Authors
+
+This document has been written by Michal Nazarewicz
+([[mailto:mina86@mina86.com]]). INF files have been hacked with
+support of Marek Szyprowski ([[mailto:m.szyprowski@samsung.com]]) and
+Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS
+template[9], Microchip's CDC ACM INF file and David Brownell's
+([[mailto:dbrownell@users.sourceforge.net]]) original INF files.
+
+* Footnotes
+
+[1] Remote Network Driver Interface Specification,
+[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
+
+[2] Communications Device Class Abstract Control Model, spec for this
+and other USB classes can be found at
+[[http://www.usb.org/developers/devclass_docs/]].
+
+[3] CDC Ethernet Control Model.
+
+[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
+
+[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
+
+[6] To put it in some other nice words, Windows failed to respond to
+any user input.
+
+[7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]]
+useful.
+
+[8] http://www.nirsoft.net/utils/usb_devices_view.html
+
+[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]]
diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf
index 14d2b879f0fbb..612e7220fb295 100644
--- a/Documentation/usb/linux-cdc-acm.inf
+++ b/Documentation/usb/linux-cdc-acm.inf
@@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys
[SourceDisksFiles]
[SourceDisksNames]
[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
;------------------------------------------------------------------------------
diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf
index b9e538c196f74..4dee95851224a 100644
--- a/Documentation/usb/linux.inf
+++ b/Documentation/usb/linux.inf
@@ -18,15 +18,15 @@ DriverVer = 06/21/2006,6.0.6000.16384
; Decoration for x86 architecture
[LinuxDevices.NTx86]
-%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
; Decoration for x64 architecture
[LinuxDevices.NTamd64]
-%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
; Decoration for ia64 architecture
[LinuxDevices.NTia64]
-%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
;@@@ This is the common setting for setup
[ControlFlags]
--
GitLab
From 3f3e12d050052032a51f75e72e540322e2a7da2b Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 21 Jun 2010 13:57:08 +0200
Subject: [PATCH 753/863] USB: gadget: composite: added disconnect callback
Added a disconnect() callback to composite devices which
is called by composite glue when its disconnect callback
is called by gadget.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/composite.c | 2 ++
include/linux/usb/composite.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 125167e17ce53..e483f80822d27 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -956,6 +956,8 @@ static void composite_disconnect(struct usb_gadget *gadget)
spin_lock_irqsave(&cdev->lock, flags);
if (cdev->config)
reset_config(cdev);
+ if (composite->disconnect)
+ composite->disconnect(cdev);
spin_unlock_irqrestore(&cdev->lock, flags);
}
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index f378075c839a6..890bc1472190f 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -276,6 +276,8 @@ struct usb_composite_driver {
int (*bind)(struct usb_composite_dev *);
int (*unbind)(struct usb_composite_dev *);
+ void (*disconnect)(struct usb_composite_dev *);
+
/* global suspend hooks */
void (*suspend)(struct usb_composite_dev *);
void (*resume)(struct usb_composite_dev *);
--
GitLab
From 8876f5e7d3b2a320777dd4f6f5301d474c97a06c Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 21 Jun 2010 13:57:09 +0200
Subject: [PATCH 754/863] USB: gadget: f_mass_storage: added eject callback
Added pre_eject() and post_eject() callbacks which are
called before and after removable logical unit is ejected.
The first can prevent logical unit from being ejected.
This commit also changes the way callbacks are passed to
the function from gadget. A fsg_operations structure has
been created which lists all callbacks -- this is passed
to the fsg_config.
This is important because it changes the way thread_exits()
callback is passed.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/f_mass_storage.c | 109 ++++++++++++++++++----------
drivers/usb/gadget/mass_storage.c | 5 +-
2 files changed, 74 insertions(+), 40 deletions(-)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index fa86b946dcd6e..32cce029f65c8 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -316,6 +316,27 @@ static const char fsg_string_interface[] = "Mass Storage";
/*-------------------------------------------------------------------------*/
struct fsg_dev;
+struct fsg_common;
+
+/* FSF callback functions */
+struct fsg_operations {
+ /* Callback function to call when thread exits. If no
+ * callback is set or it returns value lower then zero MSF
+ * will force eject all LUNs it operates on (including those
+ * marked as non-removable or with prevent_medium_removal flag
+ * set). */
+ int (*thread_exits)(struct fsg_common *common);
+
+ /* Called prior to ejection. Negative return means error,
+ * zero means to continue with ejection, positive means not to
+ * eject. */
+ int (*pre_eject)(struct fsg_common *common,
+ struct fsg_lun *lun, int num);
+ /* Called after ejection. Negative return means error, zero
+ * or positive is just a success. */
+ int (*post_eject)(struct fsg_common *common,
+ struct fsg_lun *lun, int num);
+};
/* Data shared by all the FSG instances. */
@@ -368,8 +389,8 @@ struct fsg_common {
struct completion thread_notifier;
struct task_struct *thread_task;
- /* Callback function to call when thread exits. */
- int (*thread_exits)(struct fsg_common *common);
+ /* Callback functions. */
+ const struct fsg_operations *ops;
/* Gadget's private data. */
void *private_data;
@@ -393,12 +414,8 @@ struct fsg_config {
const char *lun_name_format;
const char *thread_name;
- /* Callback function to call when thread exits. If no
- * callback is set or it returns value lower then zero MSF
- * will force eject all LUNs it operates on (including those
- * marked as non-removable or with prevent_medium_removal flag
- * set). */
- int (*thread_exits)(struct fsg_common *common);
+ /* Callback functions. */
+ const struct fsg_operations *ops;
/* Gadget's private data. */
void *private_data;
@@ -434,6 +451,7 @@ static inline int __fsg_is_set(struct fsg_common *common,
if (common->fsg)
return 1;
ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
+ WARN_ON(1);
return 0;
}
@@ -1392,43 +1410,55 @@ static int do_start_stop(struct fsg_common *common)
} else if (!curlun->removable) {
curlun->sense_data = SS_INVALID_COMMAND;
return -EINVAL;
- }
-
- loej = common->cmnd[4] & 0x02;
- start = common->cmnd[4] & 0x01;
-
- /* eject code from file_storage.c:do_start_stop() */
-
- if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
- (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
+ } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
+ (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
return -EINVAL;
}
- if (!start) {
- /* Are we allowed to unload the media? */
- if (curlun->prevent_medium_removal) {
- LDBG(curlun, "unload attempt prevented\n");
- curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
- return -EINVAL;
- }
- if (loej) { /* Simulate an unload/eject */
- up_read(&common->filesem);
- down_write(&common->filesem);
- fsg_lun_close(curlun);
- up_write(&common->filesem);
- down_read(&common->filesem);
- }
- } else {
+ loej = common->cmnd[4] & 0x02;
+ start = common->cmnd[4] & 0x01;
- /* Our emulation doesn't support mounting; the medium is
- * available for use as soon as it is loaded. */
+ /* Our emulation doesn't support mounting; the medium is
+ * available for use as soon as it is loaded. */
+ if (start) {
if (!fsg_lun_is_open(curlun)) {
curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
return -EINVAL;
}
+ return 0;
}
- return 0;
+
+ /* Are we allowed to unload the media? */
+ if (curlun->prevent_medium_removal) {
+ LDBG(curlun, "unload attempt prevented\n");
+ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
+ return -EINVAL;
+ }
+
+ if (!loej)
+ return 0;
+
+ /* Simulate an unload/eject */
+ if (common->ops && common->ops->pre_eject) {
+ int r = common->ops->pre_eject(common, curlun,
+ curlun - common->luns);
+ if (unlikely(r < 0))
+ return r;
+ else if (r)
+ return 0;
+ }
+
+ up_read(&common->filesem);
+ down_write(&common->filesem);
+ fsg_lun_close(curlun);
+ up_write(&common->filesem);
+ down_read(&common->filesem);
+
+ return common->ops && common->ops->post_eject
+ ? min(0, common->ops->post_eject(common, curlun,
+ curlun - common->luns))
+ : 0;
}
@@ -2607,7 +2637,8 @@ static int fsg_main_thread(void *common_)
common->thread_task = NULL;
spin_unlock_irq(&common->lock);
- if (!common->thread_exits || common->thread_exits(common) < 0) {
+ if (!common->ops || !common->ops->thread_exits
+ || common->ops->thread_exits(common) < 0) {
struct fsg_lun *curlun = common->luns;
unsigned i = common->nluns;
@@ -2683,6 +2714,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
common->free_storage_on_release = 0;
}
+ common->ops = cfg->ops;
common->private_data = cfg->private_data;
common->gadget = gadget;
@@ -2804,7 +2836,6 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
/* Tell the thread to start working */
- common->thread_exits = cfg->thread_exits;
common->thread_task =
kthread_create(fsg_main_thread, common,
OR(cfg->thread_name, "file-storage"));
@@ -3100,8 +3131,8 @@ fsg_config_from_params(struct fsg_config *cfg,
cfg->product_name = 0;
cfg->release = 0xffff;
- cfg->thread_exits = 0;
- cfg->private_data = 0;
+ cfg->ops = NULL;
+ cfg->private_data = NULL;
/* Finalise */
cfg->can_stall = params->stall;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 2b11e20798234..306098f2d9242 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -143,6 +143,9 @@ static int msg_thread_exits(struct fsg_common *common)
static int __init msg_do_config(struct usb_configuration *c)
{
+ static const struct fsg_operations ops = {
+ .thread_exits = msg_thread_exits,
+ };
static struct fsg_common common;
struct fsg_common *retp;
@@ -155,7 +158,7 @@ static int __init msg_do_config(struct usb_configuration *c)
}
fsg_config_from_params(&config, &mod_data);
- config.thread_exits = msg_thread_exits;
+ config.ops = &ops;
retp = fsg_common_init(&common, c->cdev, &config);
if (IS_ERR(retp))
--
GitLab
From 89ba85d4015b7fa738b35bcc228075c117a9a578 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 21 Jun 2010 13:57:04 +0200
Subject: [PATCH 755/863] USB: gadget: section mismatch warning fixed
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
In may gadgets bind and bind like functions were in a init section
as they were only run during initialisation. However, being
callback functions they were referenced from structures in “normalâ€
sections. Changing the tag from “__init†to “__ref†fixes the
warnings.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/audio.c | 4 ++--
drivers/usb/gadget/cdc2.c | 4 ++--
drivers/usb/gadget/ether.c | 6 +++---
drivers/usb/gadget/f_loopback.c | 4 ++--
drivers/usb/gadget/f_sourcesink.c | 2 +-
drivers/usb/gadget/file_storage.c | 2 +-
drivers/usb/gadget/gmidi.c | 2 +-
drivers/usb/gadget/hid.c | 4 ++--
drivers/usb/gadget/mass_storage.c | 4 ++--
drivers/usb/gadget/printer.c | 2 +-
drivers/usb/gadget/serial.c | 4 ++--
drivers/usb/gadget/webcam.c | 4 ++--
drivers/usb/gadget/zero.c | 2 +-
13 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index a62af7b59094a..b744ccd0f34d6 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -89,7 +89,7 @@ static const struct usb_descriptor_header *otg_desc[] = {
/*-------------------------------------------------------------------------*/
-static int __init audio_do_config(struct usb_configuration *c)
+static int __ref audio_do_config(struct usb_configuration *c)
{
/* FIXME alloc iConfiguration string, set it in c->strings */
@@ -113,7 +113,7 @@ static struct usb_configuration audio_config_driver = {
/*-------------------------------------------------------------------------*/
-static int __init audio_bind(struct usb_composite_dev *cdev)
+static int __ref audio_bind(struct usb_composite_dev *cdev)
{
int gcnum;
int status;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 928137d3dbdc2..1f5ba2fd4c1f2 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -129,7 +129,7 @@ static u8 hostaddr[ETH_ALEN];
/*
* We _always_ have both CDC ECM and CDC ACM functions.
*/
-static int __init cdc_do_config(struct usb_configuration *c)
+static int __ref cdc_do_config(struct usb_configuration *c)
{
int status;
@@ -159,7 +159,7 @@ static struct usb_configuration cdc_config_driver = {
/*-------------------------------------------------------------------------*/
-static int __init cdc_bind(struct usb_composite_dev *cdev)
+static int __ref cdc_bind(struct usb_composite_dev *cdev)
{
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 400f80372d938..114fa024c22c8 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -237,7 +237,7 @@ static u8 hostaddr[ETH_ALEN];
* the first one present. That's to make Microsoft's drivers happy,
* and to follow DOCSIS 1.0 (cable modem standard).
*/
-static int __init rndis_do_config(struct usb_configuration *c)
+static int __ref rndis_do_config(struct usb_configuration *c)
{
/* FIXME alloc iConfiguration string, set it in c->strings */
@@ -270,7 +270,7 @@ MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
/*
* We _always_ have an ECM, CDC Subset, or EEM configuration.
*/
-static int __init eth_do_config(struct usb_configuration *c)
+static int __ref eth_do_config(struct usb_configuration *c)
{
/* FIXME alloc iConfiguration string, set it in c->strings */
@@ -297,7 +297,7 @@ static struct usb_configuration eth_config_driver = {
/*-------------------------------------------------------------------------*/
-static int __init eth_bind(struct usb_composite_dev *cdev)
+static int __ref eth_bind(struct usb_composite_dev *cdev)
{
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index e91d1b16d9bed..43225879c3cdb 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -324,7 +324,7 @@ static void loopback_disable(struct usb_function *f)
/*-------------------------------------------------------------------------*/
-static int __init loopback_bind_config(struct usb_configuration *c)
+static int __ref loopback_bind_config(struct usb_configuration *c)
{
struct f_loopback *loop;
int status;
@@ -346,7 +346,7 @@ static int __init loopback_bind_config(struct usb_configuration *c)
return status;
}
-static struct usb_configuration loopback_driver = {
+static struct usb_configuration loopback_driver = {
.label = "loopback",
.strings = loopback_strings,
.bind = loopback_bind_config,
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 6d3cc443d9140..685d768f336e4 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -404,7 +404,7 @@ static void sourcesink_disable(struct usb_function *f)
/*-------------------------------------------------------------------------*/
-static int __init sourcesink_bind_config(struct usb_configuration *c)
+static int __ref sourcesink_bind_config(struct usb_configuration *c)
{
struct f_sourcesink *ss;
int status;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 2b6d3649d02cc..d57c09f764d6e 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3335,7 +3335,7 @@ static int __init check_parameters(struct fsg_dev *fsg)
}
-static int __init fsg_bind(struct usb_gadget *gadget)
+static int __ref fsg_bind(struct usb_gadget *gadget)
{
struct fsg_dev *fsg = the_fsg;
int rc;
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index b7bf88019b06f..1b413a5cc3f6d 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -1157,7 +1157,7 @@ static int gmidi_register_card(struct gmidi_device *dev)
/*
* Creates an output endpoint, and initializes output ports.
*/
-static int __init gmidi_bind(struct usb_gadget *gadget)
+static int __ref gmidi_bind(struct usb_gadget *gadget)
{
struct gmidi_device *dev;
struct usb_ep *in_ep, *out_ep;
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 775722686ed85..735495bf8411b 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -127,7 +127,7 @@ static struct usb_gadget_strings *dev_strings[] = {
/****************************** Configurations ******************************/
-static int __init do_config(struct usb_configuration *c)
+static int __ref do_config(struct usb_configuration *c)
{
struct hidg_func_node *e;
int func = 0, status = 0;
@@ -156,7 +156,7 @@ static struct usb_configuration config_driver = {
/****************************** Gadget Bind ******************************/
-static int __init hid_bind(struct usb_composite_dev *cdev)
+static int __ref hid_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
struct list_head *tmp;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 306098f2d9242..585f2559484df 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -141,7 +141,7 @@ static int msg_thread_exits(struct fsg_common *common)
return 0;
}
-static int __init msg_do_config(struct usb_configuration *c)
+static int __ref msg_do_config(struct usb_configuration *c)
{
static const struct fsg_operations ops = {
.thread_exits = msg_thread_exits,
@@ -182,7 +182,7 @@ static struct usb_configuration msg_config_driver = {
/****************************** Gadget Bind ******************************/
-static int __init msg_bind(struct usb_composite_dev *cdev)
+static int __ref msg_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
int status;
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 4c3ac5c422373..88f05996aa025 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1346,7 +1346,7 @@ printer_unbind(struct usb_gadget *gadget)
set_gadget_data(gadget, NULL);
}
-static int __init
+static int __ref
printer_bind(struct usb_gadget *gadget)
{
struct printer_dev *dev;
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index f46a60962dab7..b22eedbc7dc58 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -137,7 +137,7 @@ MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
/*-------------------------------------------------------------------------*/
-static int __init serial_bind_config(struct usb_configuration *c)
+static int __ref serial_bind_config(struct usb_configuration *c)
{
unsigned i;
int status = 0;
@@ -161,7 +161,7 @@ static struct usb_configuration serial_config_driver = {
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
};
-static int __init gs_bind(struct usb_composite_dev *cdev)
+static int __ref gs_bind(struct usb_composite_dev *cdev)
{
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 288d21155abe7..de1deb7a3c632 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -308,7 +308,7 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
* USB configuration
*/
-static int __init
+static int __ref
webcam_config_bind(struct usb_configuration *c)
{
return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls,
@@ -330,7 +330,7 @@ webcam_unbind(struct usb_composite_dev *cdev)
return 0;
}
-static int __init
+static int __ref
webcam_bind(struct usb_composite_dev *cdev)
{
int ret;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 807280d069f96..cf353920bb1cc 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -264,7 +264,7 @@ static void zero_resume(struct usb_composite_dev *cdev)
/*-------------------------------------------------------------------------*/
-static int __init zero_bind(struct usb_composite_dev *cdev)
+static int __ref zero_bind(struct usb_composite_dev *cdev)
{
int gcnum;
struct usb_gadget *gadget = cdev->gadget;
--
GitLab
From 541c7d432f76771079e7c295d596ea47cc6a3030 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 22 Jun 2010 16:39:10 -0400
Subject: [PATCH 756/863] USB: convert usb_hcd bitfields into atomic flags
This patch (as1393) converts several of the single-bit fields in
struct usb_hcd to atomic flags. This is for safety's sake; not all
CPUs can update bitfield values atomically, and these flags are used
in multiple contexts.
The flag fields that are set only during registration or removal can
remain as they are, since non-atomic accesses at those times will not
cause any problems.
(Strictly speaking, the authorized_default flag should become atomic
as well. I didn't bother with it because it gets changed only via
sysfs. It can be done later, if anyone wants.)
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/staging/usbip/vhci_hcd.c | 6 +++---
drivers/usb/c67x00/c67x00-hcd.c | 4 ++--
drivers/usb/core/hcd.c | 26 ++++++++++++--------------
drivers/usb/gadget/dummy_hcd.c | 6 +++---
drivers/usb/host/ehci-dbg.c | 2 +-
drivers/usb/host/ehci-hcd.c | 1 -
drivers/usb/host/ehci-hub.c | 2 +-
drivers/usb/host/ehci-q.c | 3 +--
drivers/usb/host/ehci-sched.c | 9 +++------
drivers/usb/host/hwa-hc.c | 4 ++--
drivers/usb/host/isp1760-hcd.c | 3 +--
drivers/usb/host/ohci-dbg.c | 4 ++--
drivers/usb/host/ohci-hcd.c | 6 +++---
drivers/usb/host/ohci-hub.c | 16 ++++++++++------
drivers/usb/host/oxu210hp-hcd.c | 7 ++-----
drivers/usb/host/uhci-hcd.c | 21 ++++++++++++---------
drivers/usb/host/uhci-hub.c | 4 ++--
drivers/usb/host/whci/hcd.c | 2 +-
drivers/usb/host/xhci.c | 3 +--
drivers/usb/musb/musb_virthub.c | 2 +-
include/linux/usb/hcd.h | 22 +++++++++++++++++-----
21 files changed, 80 insertions(+), 73 deletions(-)
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index be5d8db981650..0574d848b9000 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -215,7 +215,7 @@ static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
vhci = hcd_to_vhci(hcd);
spin_lock_irqsave(&vhci->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
usbip_dbg_vhci_rh("hw accessible flag in on?\n");
goto done;
}
@@ -269,7 +269,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u32 prev_port_status[VHCI_NPORTS];
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
return -ETIMEDOUT;
/*
@@ -1041,7 +1041,7 @@ static int vhci_bus_resume(struct usb_hcd *hcd)
dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq(&vhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
rc = -ESHUTDOWN;
} else {
/* vhci->rh_state = DUMMY_RH_RUNNING;
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
index a22b887f4e9ef..d3e1356d091e5 100644
--- a/drivers/usb/c67x00/c67x00-hcd.c
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -264,7 +264,7 @@ static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
if (unlikely(hcd->state == HC_STATE_HALT))
return;
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
return;
/* Handle Start of frame events */
@@ -282,7 +282,7 @@ static int c67x00_hcd_start(struct usb_hcd *hcd)
{
hcd->uses_new_polling = 1;
hcd->state = HC_STATE_RUNNING;
- hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
return 0;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 53f14c82ff2e4..f2fe7c8e991d7 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -679,7 +679,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
spin_lock_irqsave(&hcd_root_hub_lock, flags);
urb = hcd->status_urb;
if (urb) {
- hcd->poll_pending = 0;
+ clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
hcd->status_urb = NULL;
urb->actual_length = length;
memcpy(urb->transfer_buffer, buffer, length);
@@ -690,7 +690,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
spin_lock(&hcd_root_hub_lock);
} else {
length = 0;
- hcd->poll_pending = 1;
+ set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
}
spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
}
@@ -699,7 +699,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
* exceed that limit if HZ is 100. The math is more clunky than
* maybe expected, this is to make sure that all timers for USB devices
* fire at the same time to give the CPU a break inbetween */
- if (hcd->uses_new_polling ? hcd->poll_rh :
+ if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
(length == 0 && hcd->status_urb != NULL))
mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
}
@@ -736,7 +736,7 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
/* If a status change has already occurred, report it ASAP */
- else if (hcd->poll_pending)
+ else if (HCD_POLL_PENDING(hcd))
mod_timer(&hcd->rh_timer, jiffies);
retval = 0;
done:
@@ -1150,8 +1150,7 @@ int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
* finish unlinking the initial failed usb_set_address()
* or device descriptor fetch.
*/
- if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
- !is_root_hub(urb->dev)) {
+ if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) {
dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
"Controller is probably using the wrong IRQ.\n");
set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
@@ -2063,8 +2062,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
*/
local_irq_save(flags);
- if (unlikely(hcd->state == HC_STATE_HALT ||
- !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ if (unlikely(hcd->state == HC_STATE_HALT || !HCD_HW_ACCESSIBLE(hcd))) {
rc = IRQ_NONE;
} else if (hcd->driver->irq(hcd) == IRQ_NONE) {
rc = IRQ_NONE;
@@ -2098,7 +2096,7 @@ void usb_hc_died (struct usb_hcd *hcd)
spin_lock_irqsave (&hcd_root_hub_lock, flags);
if (hcd->rh_registered) {
- hcd->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
/* make khubd clean up old urbs and devices */
usb_set_device_state (hcd->self.root_hub,
@@ -2301,7 +2299,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
retval);
goto error_create_attr_group;
}
- if (hcd->uses_new_polling && hcd->poll_rh)
+ if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
usb_hcd_poll_rh_status(hcd);
return retval;
@@ -2320,11 +2318,11 @@ int usb_add_hcd(struct usb_hcd *hcd,
mutex_unlock(&usb_bus_list_lock);
err_register_root_hub:
hcd->rh_pollable = 0;
- hcd->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
- hcd->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
err_hcd_driver_start:
if (hcd->irq >= 0)
@@ -2380,14 +2378,14 @@ void usb_remove_hcd(struct usb_hcd *hcd)
* the hub_status_data() callback.
*/
hcd->rh_pollable = 0;
- hcd->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
/* In case the HCD restarted the timer, stop it again. */
- hcd->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
if (hcd->irq >= 0)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 4f9e578cde9db..dc6546248ed99 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1542,7 +1542,7 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf)
dum = hcd_to_dummy (hcd);
spin_lock_irqsave (&dum->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
goto done;
if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) {
@@ -1588,7 +1588,7 @@ static int dummy_hub_control (
int retval = 0;
unsigned long flags;
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
return -ETIMEDOUT;
dum = hcd_to_dummy (hcd);
@@ -1739,7 +1739,7 @@ static int dummy_bus_resume (struct usb_hcd *hcd)
dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
rc = -ESHUTDOWN;
} else {
dum->rh_state = DUMMY_RH_RUNNING;
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index df5546bb83679..4498efb49b95a 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -712,7 +712,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
spin_lock_irqsave (&ehci->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
size = scnprintf (next, size,
"bus %s, device %s\n"
"%s\n"
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 8697ad19f313c..2a19336c9824f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -642,7 +642,6 @@ static int ehci_run (struct usb_hcd *hcd)
u32 hcc_params;
hcd->uses_new_polling = 1;
- hcd->poll_rh = 0;
/* EHCI spec section 4.1 */
if ((retval = ehci_reset(ehci)) != 0) {
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 84e792d71c224..0931f5a7dec4c 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -316,7 +316,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
spin_lock_irq (&ehci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
spin_unlock_irq(&ehci->lock);
return -ESHUTDOWN;
}
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 11a79c4f4a9db..233c288e3f931 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1126,8 +1126,7 @@ submit_async (
#endif
spin_lock_irqsave (&ehci->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
rc = -ESHUTDOWN;
goto done;
}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 805ec633a6526..d640346f9b56b 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -880,8 +880,7 @@ static int intr_submit (
spin_lock_irqsave (&ehci->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
status = -ESHUTDOWN;
goto done_not_linked;
}
@@ -1815,8 +1814,7 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb,
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
status = -ESHUTDOWN;
goto done_not_linked;
}
@@ -2201,8 +2199,7 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
status = -ESHUTDOWN;
goto done_not_linked;
}
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 35742f8c7cdaf..9bfac657572e2 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -159,7 +159,7 @@ static int hwahc_op_start(struct usb_hcd *usb_hcd)
goto error_set_cluster_id;
usb_hcd->uses_new_polling = 1;
- usb_hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags);
usb_hcd->state = HC_STATE_RUNNING;
result = 0;
out:
@@ -776,7 +776,7 @@ static int hwahc_probe(struct usb_interface *usb_iface,
goto error_alloc;
}
usb_hcd->wireless = 1;
- usb_hcd->flags |= HCD_FLAG_SAW_IRQ;
+ set_bit(HCD_FLAG_SAW_IRQ, &usb_hcd->flags);
wusbhc = usb_hcd_to_wusbhc(usb_hcd);
hwahc = container_of(wusbhc, struct hwahc, wusbhc);
hwahc_init(hwahc);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index dbcafa29c7753..d1a3dfc9a4087 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -482,7 +482,6 @@ static int isp1760_run(struct usb_hcd *hcd)
u32 chipid;
hcd->uses_new_polling = 1;
- hcd->poll_rh = 0;
hcd->state = HC_STATE_RUNNING;
isp1760_enable_interrupts(hcd);
@@ -1450,7 +1449,7 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb,
epnum = urb->ep->desc.bEndpointAddress;
spin_lock_irqsave(&priv->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) {
+ if (!HCD_HW_ACCESSIBLE(priv_to_hcd(priv))) {
rc = -ESHUTDOWN;
goto done;
}
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 8ad2441b02848..36abd2baa3ea6 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -645,7 +645,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
hcd->product_desc,
hcd_name);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
size -= scnprintf (next, size,
"SUSPENDED (no register access)\n");
goto done;
@@ -687,7 +687,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
next += temp;
temp = scnprintf (next, size, "hub poll timer %s\n",
- ohci_to_hcd(ohci)->poll_rh ? "ON" : "off");
+ HCD_POLL_RH(ohci_to_hcd(ohci)) ? "ON" : "off");
size -= temp;
next += temp;
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 02864a237a2c1..c3b4ccc7337b5 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -212,7 +212,7 @@ static int ohci_urb_enqueue (
spin_lock_irqsave (&ohci->lock, flags);
/* don't submit to a dead HC */
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
retval = -ENODEV;
goto fail;
}
@@ -685,7 +685,7 @@ static int ohci_run (struct ohci_hcd *ohci)
}
/* use rhsc irqs after khubd is fully initialized */
- hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
hcd->uses_new_polling = 1;
/* start controller operations */
@@ -822,7 +822,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
else if (ints & OHCI_INTR_RD) {
ohci_vdbg(ohci, "resume detect\n");
ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus);
- hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
if (ohci->autostop) {
spin_lock (&ohci->lock);
ohci_rh_resume (ohci);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 65cac8cc89212..4dd39022c3884 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -284,7 +284,7 @@ static int ohci_bus_suspend (struct usb_hcd *hcd)
spin_lock_irq (&ohci->lock);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
rc = -ESHUTDOWN;
else
rc = ohci_rh_suspend (ohci, 0);
@@ -302,7 +302,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
spin_lock_irq (&ohci->lock);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
rc = -ESHUTDOWN;
else
rc = ohci_rh_resume (ohci);
@@ -489,7 +489,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
goto done;
/* undocumented erratum seen on at least rev D */
@@ -533,8 +533,12 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
}
}
- hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
- any_connected, rhsc_status);
+ if (ohci_root_hub_state_changes(ohci, changed,
+ any_connected, rhsc_status))
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ else
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
done:
spin_unlock_irqrestore (&ohci->lock, flags);
@@ -701,7 +705,7 @@ static int ohci_hub_control (
u32 temp;
int retval = 0;
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
return -ESHUTDOWN;
switch (typeReq) {
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index f608dfd09a8aa..d9c85a2927371 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -1641,8 +1641,7 @@ static int submit_async(struct oxu_hcd *oxu, struct urb *urb,
#endif
spin_lock_irqsave(&oxu->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &oxu_to_hcd(oxu)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
rc = -ESHUTDOWN;
goto done;
}
@@ -2209,8 +2208,7 @@ static int intr_submit(struct oxu_hcd *oxu, struct urb *urb,
spin_lock_irqsave(&oxu->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &oxu_to_hcd(oxu)->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
status = -ESHUTDOWN;
goto done;
}
@@ -2715,7 +2713,6 @@ static int oxu_run(struct usb_hcd *hcd)
u32 temp, hcc_params;
hcd->uses_new_polling = 1;
- hcd->poll_rh = 0;
/* EHCI spec section 4.1 */
retval = ehci_reset(oxu);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d1dce2166eff5..2743ec770f0cb 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -140,7 +140,7 @@ static void finish_reset(struct uhci_hcd *uhci)
uhci->rh_state = UHCI_RH_RESET;
uhci->is_stopped = UHCI_IS_STOPPED;
uhci_to_hcd(uhci)->state = HC_STATE_HALT;
- uhci_to_hcd(uhci)->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
uhci->dead = 0; /* Full reset resurrects the controller */
}
@@ -344,7 +344,10 @@ __acquires(uhci->lock)
/* If interrupts don't work and remote wakeup is enabled then
* the suspended root hub needs to be polled.
*/
- uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable);
+ if (!int_enable && wakeup_enable)
+ set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
+ else
+ clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
uhci_scan_schedule(uhci);
uhci_fsbr_off(uhci);
@@ -363,7 +366,7 @@ static void start_rh(struct uhci_hcd *uhci)
uhci->io_addr + USBINTR);
mb();
uhci->rh_state = UHCI_RH_RUNNING;
- uhci_to_hcd(uhci)->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
}
static void wakeup_rh(struct uhci_hcd *uhci)
@@ -733,7 +736,7 @@ static void uhci_stop(struct usb_hcd *hcd)
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
spin_lock_irq(&uhci->lock);
- if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead)
+ if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead)
uhci_hc_died(uhci);
uhci_scan_schedule(uhci);
spin_unlock_irq(&uhci->lock);
@@ -750,7 +753,7 @@ static int uhci_rh_suspend(struct usb_hcd *hcd)
int rc = 0;
spin_lock_irq(&uhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
rc = -ESHUTDOWN;
else if (uhci->dead)
; /* Dead controllers tell no tales */
@@ -777,7 +780,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
int rc = 0;
spin_lock_irq(&uhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ if (!HCD_HW_ACCESSIBLE(hcd))
rc = -ESHUTDOWN;
else if (!uhci->dead)
wakeup_rh(uhci);
@@ -793,7 +796,7 @@ static int uhci_pci_suspend(struct usb_hcd *hcd)
dev_dbg(uhci_dev(uhci), "%s\n", __func__);
spin_lock_irq(&uhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+ if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
goto done_okay; /* Already suspended or dead */
if (uhci->rh_state > UHCI_RH_SUSPENDED) {
@@ -807,7 +810,7 @@ static int uhci_pci_suspend(struct usb_hcd *hcd)
*/
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
mb();
- hcd->poll_rh = 0;
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
/* FIXME: Enable non-PME# remote wakeup? */
@@ -860,7 +863,7 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
* the suspended root hub needs to be polled.
*/
if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) {
- hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
usb_hcd_poll_rh_status(hcd);
}
return 0;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 8270055848cac..f0c58116c0adf 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -190,7 +190,7 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
spin_lock_irqsave(&uhci->lock, flags);
uhci_scan_schedule(uhci);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+ if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
goto done;
uhci_check_ports(uhci);
@@ -246,7 +246,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wPortChange, wPortStatus;
unsigned long flags;
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+ if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
return -ETIMEDOUT;
spin_lock_irqsave(&uhci->lock, flags);
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index e0d3401285c8d..72b6892fda67d 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -68,7 +68,7 @@ static int whc_start(struct usb_hcd *usb_hcd)
whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN);
usb_hcd->uses_new_polling = 1;
- usb_hcd->poll_rh = 1;
+ set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags);
usb_hcd->state = HC_STATE_RUNNING;
out:
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 343f1047f5d08..5e73386b38996 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -427,7 +427,6 @@ int xhci_run(struct usb_hcd *hcd)
void (*doorbell)(struct xhci_hcd *) = NULL;
hcd->uses_new_polling = 1;
- hcd->poll_rh = 0;
xhci_dbg(xhci, "xhci_run\n");
#if 0 /* FIXME: MSI not setup yet */
@@ -733,7 +732,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
ret = -EINVAL;
goto exit;
}
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
if (!in_interrupt())
xhci_dbg(xhci, "urb submitted during PCI suspend\n");
ret = -ESHUTDOWN;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 92e85e027cfb8..43233c397b6e6 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -244,7 +244,7 @@ int musb_hub_control(
spin_lock_irqsave(&musb->lock, flags);
- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
spin_unlock_irqrestore(&musb->lock, flags);
return -ESHUTDOWN;
}
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 9b867e64a0f46..f8f8fa7a56e89 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -89,19 +89,31 @@ struct usb_hcd {
*/
const struct hc_driver *driver; /* hw-specific hooks */
- /* Flags that need to be manipulated atomically */
+ /* Flags that need to be manipulated atomically because they can
+ * change while the host controller is running. Always use
+ * set_bit() or clear_bit() to change their values.
+ */
unsigned long flags;
-#define HCD_FLAG_HW_ACCESSIBLE 0x00000001
-#define HCD_FLAG_SAW_IRQ 0x00000002
+#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
+#define HCD_FLAG_SAW_IRQ 1
+#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
+#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
+
+ /* The flags can be tested using these macros; they are likely to
+ * be slightly faster than test_bit().
+ */
+#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
+#define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ))
+#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+ /* Flags that get set only during HCD registration or removal. */
unsigned rh_registered:1;/* is root hub registered? */
unsigned rh_pollable:1; /* may we poll the root hub? */
/* The next flag is a stopgap, to be removed when all the HCDs
* support the new root-hub polling mechanism. */
unsigned uses_new_polling:1;
- unsigned poll_rh:1; /* poll for rh status? */
- unsigned poll_pending:1; /* status has changed? */
unsigned wireless:1; /* Wireless USB HCD */
unsigned authorized_default:1;
unsigned has_tt:1; /* Integrated TT in root hub */
--
GitLab
From f8dae531ec78ed34f8a845e5f4ff75f0adeb6b13 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Fri, 25 Jun 2010 16:29:27 +0200
Subject: [PATCH 757/863] USB: gadget: g_fs: code cleanup
This commit cleans the g_fs gadget hopefully making it more
readable. This is achieved by usage of the usb_string_ids_tab()
function for batch string IDs registration as well as
generalising configuration so that a single routine is
used to add each configuration and bind interfaces. As an
effect, the code is shorter and has fewer #ifdefs.
Moreover, in some circumstances previous code #defined
CONFIG_USB_FUNCTIONFS_GENERIC macro to prevent a situation
where gadget with no configurations is built. This code removes
the #define form source code and achieves the same effect using
select in Kconfig.
This patch also changes wording and names of the Kconfig options.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/Kconfig | 23 ++---
drivers/usb/gadget/g_ffs.c | 174 ++++++++++---------------------------
2 files changed, 60 insertions(+), 137 deletions(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 027f61b1f3d82..dd3b251018587 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -714,6 +714,7 @@ config USB_GADGETFS
config USB_FUNCTIONFS
tristate "Function Filesystem (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
help
The Function Filesystem (FunctioFS) lets one create USB
composite functions in user space in the same way as GadgetFS
@@ -722,31 +723,31 @@ config USB_FUNCTIONFS
implemented in kernel space (for instance Ethernet, serial or
mass storage) and other are implemented in user space.
+ If you say "y" or "m" here you will be able what kind of
+ configurations the gadget will provide.
+
Say "y" to link the driver statically, or "m" to build
a dynamically linked module called "g_ffs".
config USB_FUNCTIONFS_ETH
- bool "Include CDC ECM (Ethernet) function"
+ bool "Include configuration with CDC ECM (Ethernet)"
depends on USB_FUNCTIONFS && NET
help
- Include an CDC ECM (Ethernet) funcion in the CDC ECM (Funcion)
- Filesystem. If you also say "y" to the RNDIS query below the
- gadget will have two configurations.
+ Include a configuration with CDC ECM funcion (Ethernet) and the
+ Funcion Filesystem.
config USB_FUNCTIONFS_RNDIS
- bool "Include RNDIS (Ethernet) function"
+ bool "Include configuration with RNDIS (Ethernet)"
depends on USB_FUNCTIONFS && NET
help
- Include an RNDIS (Ethernet) funcion in the Funcion Filesystem.
- If you also say "y" to the CDC ECM query above the gadget will
- have two configurations.
+ Include a configuration with RNDIS funcion (Ethernet) and the Filesystem.
config USB_FUNCTIONFS_GENERIC
bool "Include 'pure' configuration"
- depends on USB_FUNCTIONFS && (USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
+ depends on USB_FUNCTIONFS
help
- Include a configuration with FunctionFS and no Ethernet
- configuration.
+ Include a configuration with the Function Filesystem alone with
+ no Ethernet interface.
config USB_FILE_STORAGE
tristate "File-backed Storage Gadget"
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index da3a9e403497a..a9474f8d53255 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -32,12 +32,13 @@
# include "u_ether.c"
static u8 gfs_hostaddr[ETH_ALEN];
-#else
-# if !defined CONFIG_USB_FUNCTIONFS_GENERIC
-# define CONFIG_USB_FUNCTIONFS_GENERIC
+# ifdef CONFIG_USB_FUNCTIONFS_ETH
+static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
# endif
+#else
# define gether_cleanup() do { } while (0)
# define gether_setup(gadget, hostaddr) ((int)0)
+# define gfs_hostaddr NULL
#endif
#include "f_fs.c"
@@ -107,15 +108,7 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = {
enum {
GFS_STRING_MANUFACTURER_IDX,
GFS_STRING_PRODUCT_IDX,
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
- GFS_STRING_RNDIS_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_ETH
- GFS_STRING_ECM_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
- GFS_STRING_GENERIC_CONFIG_IDX,
-#endif
+ GFS_STRING_FIRST_CONFIG_IDX,
};
static char gfs_manufacturer[50];
@@ -126,13 +119,13 @@ static struct usb_string gfs_strings[] = {
[GFS_STRING_MANUFACTURER_IDX].s = gfs_manufacturer,
[GFS_STRING_PRODUCT_IDX].s = gfs_driver_desc,
#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
- [GFS_STRING_RNDIS_CONFIG_IDX].s = "FunctionFS + RNDIS",
+ { .s = "FunctionFS + RNDIS" },
#endif
#ifdef CONFIG_USB_FUNCTIONFS_ETH
- [GFS_STRING_ECM_CONFIG_IDX].s = "FunctionFS + ECM",
+ { .s = "FunctionFS + ECM" },
#endif
#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
- [GFS_STRING_GENERIC_CONFIG_IDX].s = "FunctionFS",
+ { .s = "FunctionFS" },
#endif
{ } /* end of list */
};
@@ -146,59 +139,33 @@ static struct usb_gadget_strings *gfs_dev_strings[] = {
};
+
+struct gfs_configuration {
+ struct usb_configuration c;
+ int (*eth)(struct usb_configuration *c, u8 *ethaddr);
+} gfs_configurations[] = {
#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-static int gfs_do_rndis_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_rndis_config_driver = {
- .label = "FunctionFS + RNDIS",
- .bind = gfs_do_rndis_config,
- .bConfigurationValue = 1,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
-# define gfs_add_rndis_config(cdev) \
- usb_add_config(cdev, &gfs_rndis_config_driver)
-#else
-# define gfs_add_rndis_config(cdev) 0
+ {
+ .eth = rndis_bind_config,
+ },
#endif
-
#ifdef CONFIG_USB_FUNCTIONFS_ETH
-static int gfs_do_ecm_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_ecm_config_driver = {
- .label = "FunctionFS + ECM",
- .bind = gfs_do_ecm_config,
- .bConfigurationValue = 1,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
-# define gfs_add_ecm_config(cdev) \
- usb_add_config(cdev, &gfs_ecm_config_driver)
-#else
-# define gfs_add_ecm_config(cdev) 0
+ {
+ .eth = eth_bind_config,
+ },
#endif
-
#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-static int gfs_do_generic_config(struct usb_configuration *c);
-
-static struct usb_configuration gfs_generic_config_driver = {
- .label = "FunctionFS",
- .bind = gfs_do_generic_config,
- .bConfigurationValue = 2,
- /* .iConfiguration = DYNAMIC */
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
-};
-# define gfs_add_generic_config(cdev) \
- usb_add_config(cdev, &gfs_generic_config_driver)
-#else
-# define gfs_add_generic_config(cdev) 0
+ {
+ },
#endif
+};
static int gfs_bind(struct usb_composite_dev *cdev);
static int gfs_unbind(struct usb_composite_dev *cdev);
+static int gfs_do_config(struct usb_configuration *c);
static struct usb_composite_driver gfs_driver = {
.name = gfs_short_name,
@@ -267,7 +234,7 @@ static int functionfs_check_dev_callback(const char *dev_name)
static int gfs_bind(struct usb_composite_dev *cdev)
{
- int ret;
+ int ret, i;
ENTER();
@@ -284,57 +251,32 @@ static int gfs_bind(struct usb_composite_dev *cdev)
snprintf(gfs_manufacturer, sizeof gfs_manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
cdev->gadget->name);
- ret = usb_string_id(cdev);
- if (unlikely(ret < 0))
- goto error;
- gfs_strings[GFS_STRING_MANUFACTURER_IDX].id = ret;
- gfs_dev_desc.iManufacturer = ret;
-
- ret = usb_string_id(cdev);
- if (unlikely(ret < 0))
- goto error;
- gfs_strings[GFS_STRING_PRODUCT_IDX].id = ret;
- gfs_dev_desc.iProduct = ret;
-
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
- ret = usb_string_id(cdev);
- if (unlikely(ret < 0))
- goto error;
- gfs_strings[GFS_STRING_RNDIS_CONFIG_IDX].id = ret;
- gfs_rndis_config_driver.iConfiguration = ret;
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_ETH
- ret = usb_string_id(cdev);
+ ret = usb_string_ids_tab(cdev, gfs_strings);
if (unlikely(ret < 0))
goto error;
- gfs_strings[GFS_STRING_ECM_CONFIG_IDX].id = ret;
- gfs_ecm_config_driver.iConfiguration = ret;
-#endif
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
- ret = usb_string_id(cdev);
- if (unlikely(ret < 0))
- goto error;
- gfs_strings[GFS_STRING_GENERIC_CONFIG_IDX].id = ret;
- gfs_generic_config_driver.iConfiguration = ret;
-#endif
+ gfs_dev_desc.iManufacturer = gfs_strings[GFS_STRING_MANUFACTURER_IDX].id;
+ gfs_dev_desc.iProduct = gfs_strings[GFS_STRING_PRODUCT_IDX].id;
ret = functionfs_bind(gfs_ffs_data, cdev);
if (unlikely(ret < 0))
goto error;
- ret = gfs_add_rndis_config(cdev);
- if (unlikely(ret < 0))
- goto error_unbind;
+ for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) {
+ struct gfs_configuration *c = gfs_configurations + i;
- ret = gfs_add_ecm_config(cdev);
- if (unlikely(ret < 0))
- goto error_unbind;
+ ret = GFS_STRING_FIRST_CONFIG_IDX + i;
+ c->c.label = gfs_strings[ret].s;
+ c->c.iConfiguration = gfs_strings[ret].id;
+ c->c.bind = gfs_do_config;
+ c->c.bConfigurationValue = 1 + i;
+ c->c.bmAttributes = USB_CONFIG_ATT_SELFPOWER;
- ret = gfs_add_generic_config(cdev);
- if (unlikely(ret < 0))
- goto error_unbind;
+ ret = usb_add_config(cdev, &c->c);
+ if (unlikely(ret < 0))
+ goto error_unbind;
+ }
return 0;
@@ -368,10 +310,10 @@ static int gfs_unbind(struct usb_composite_dev *cdev)
}
-static int __gfs_do_config(struct usb_configuration *c,
- int (*eth)(struct usb_configuration *c, u8 *ethaddr),
- u8 *ethaddr)
+static int gfs_do_config(struct usb_configuration *c)
{
+ struct gfs_configuration *gc =
+ container_of(c, struct gfs_configuration, c);
int ret;
if (WARN_ON(!gfs_ffs_data))
@@ -382,8 +324,8 @@ static int __gfs_do_config(struct usb_configuration *c,
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- if (eth) {
- ret = eth(c, ethaddr);
+ if (gc->eth) {
+ ret = gc->eth(c, gfs_hostaddr);
if (unlikely(ret < 0))
return ret;
}
@@ -406,32 +348,12 @@ static int __gfs_do_config(struct usb_configuration *c,
return 0;
}
-#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
-static int gfs_do_rndis_config(struct usb_configuration *c)
-{
- ENTER();
-
- return __gfs_do_config(c, rndis_bind_config, gfs_hostaddr);
-}
-#endif
#ifdef CONFIG_USB_FUNCTIONFS_ETH
-static int gfs_do_ecm_config(struct usb_configuration *c)
-{
- ENTER();
-
- return __gfs_do_config(c,
- can_support_ecm(c->cdev->gadget)
- ? ecm_bind_config : geth_bind_config,
- gfs_hostaddr);
-}
-#endif
-
-#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
-static int gfs_do_generic_config(struct usb_configuration *c)
+static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
{
- ENTER();
-
- return __gfs_do_config(c, NULL, NULL);
+ return can_support_ecm(c->cdev->gadget)
+ ? ecm_bind_config(c, ethaddr)
+ : geth_bind_config(c, ethaddr);
}
#endif
--
GitLab
From 2138a1f1835274b1d131a1aafa1655f60b2af122 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 25 Jun 2010 14:01:49 -0400
Subject: [PATCH 758/863] USB: refactor the powermac-specific ASIC clock code
This patch (as1383) takes the powermac-specific code from the PCI HCD
glue layer and encapsulates it in its own subroutine.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd-pci.c | 44 ++++++++++++++++++++------------------
1 file changed, 23 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 7e2d5271b0c97..7c3b0af622418 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -332,6 +332,27 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PPC_PMAC
+static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{
+ /* Enanble or disable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(pci_dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE,
+ of_node, 0, enable);
+ }
+}
+
+#else
+
+static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{}
+
+#endif /* CONFIG_PPC_PMAC */
+
static int check_root_hub_suspended(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -416,16 +437,7 @@ static int hcd_pci_suspend_noirq(struct device *dev)
return retval;
}
-#ifdef CONFIG_PPC_PMAC
- /* Disable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(pci_dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
- }
-#endif
+ powermac_set_asic(pci_dev, 0);
return retval;
}
@@ -433,17 +445,7 @@ static int hcd_pci_resume_noirq(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
-#ifdef CONFIG_PPC_PMAC
- /* Reenable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(pci_dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 1);
- }
-#endif
+ powermac_set_asic(pci_dev, 1);
/* Go back to D0 and disable remote wakeup */
pci_back_from_sleep(pci_dev);
--
GitLab
From 057c58bfb1dc9bbb75b8ba3b6c6336cfca63b9d0 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 25 Jun 2010 14:02:03 -0400
Subject: [PATCH 759/863] USB: move PCI HCD resume routine
This patch (as1384) moves the resume_common() routine in hcd-pci.c a
little higher in the source file to avoid forward references in an
upcoming patch. It also replaces the "hibernated" argument with a
more general "event" argument, which will be useful when the routine
is called during a runtime resume.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd-pci.c | 77 +++++++++++++++++++-------------------
1 file changed, 39 insertions(+), 38 deletions(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 7c3b0af622418..f0156de8db670 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -403,6 +403,43 @@ static int hcd_pci_suspend(struct device *dev)
return retval;
}
+static int resume_common(struct device *dev, int event)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
+
+ if (hcd->state != HC_STATE_SUSPENDED) {
+ dev_dbg(dev, "can't resume, not suspended!\n");
+ return 0;
+ }
+
+ retval = pci_enable_device(pci_dev);
+ if (retval < 0) {
+ dev_err(dev, "can't re-enable after resume, %d!\n", retval);
+ return retval;
+ }
+
+ pci_set_master(pci_dev);
+
+ clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ if (hcd->driver->pci_resume) {
+ /* This call should be made only during system resume,
+ * not during runtime resume.
+ */
+ wait_for_companions(pci_dev, hcd);
+
+ retval = hcd->driver->pci_resume(hcd,
+ event == PM_EVENT_RESTORE);
+ if (retval) {
+ dev_err(dev, "PCI post-resume error %d!\n", retval);
+ usb_hc_died(hcd);
+ }
+ }
+ return retval;
+}
+
static int hcd_pci_suspend_noirq(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -452,50 +489,14 @@ static int hcd_pci_resume_noirq(struct device *dev)
return 0;
}
-static int resume_common(struct device *dev, bool hibernated)
-{
- struct pci_dev *pci_dev = to_pci_dev(dev);
- struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
- int retval;
-
- if (hcd->state != HC_STATE_SUSPENDED) {
- dev_dbg(dev, "can't resume, not suspended!\n");
- return 0;
- }
-
- retval = pci_enable_device(pci_dev);
- if (retval < 0) {
- dev_err(dev, "can't re-enable after resume, %d!\n", retval);
- return retval;
- }
-
- pci_set_master(pci_dev);
-
- clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-
- if (hcd->driver->pci_resume) {
- /* This call should be made only during system resume,
- * not during runtime resume.
- */
- wait_for_companions(pci_dev, hcd);
-
- retval = hcd->driver->pci_resume(hcd, hibernated);
- if (retval) {
- dev_err(dev, "PCI post-resume error %d!\n", retval);
- usb_hc_died(hcd);
- }
- }
- return retval;
-}
-
static int hcd_pci_resume(struct device *dev)
{
- return resume_common(dev, false);
+ return resume_common(dev, PM_EVENT_RESUME);
}
static int hcd_pci_restore(struct device *dev)
{
- return resume_common(dev, true);
+ return resume_common(dev, PM_EVENT_RESTORE);
}
const struct dev_pm_ops usb_hcd_pci_pm_ops = {
--
GitLab
From 4147200d25c423e627ab4487530b3d9f2ef829c8 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 25 Jun 2010 14:02:14 -0400
Subject: [PATCH 760/863] USB: add do_wakeup parameter for PCI HCD suspend
This patch (as1385) adds a "do_wakeup" parameter to the pci_suspend
method used by PCI-based host controller drivers. ehci-hcd in
particular needs to know whether or not to enable wakeup when
suspending a controller. Although that information is currently
available through device_may_wakeup(), when support is added for
runtime suspend this will no longer be true.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd-pci.c | 4 +++-
drivers/usb/host/ehci-au1xxx.c | 2 +-
drivers/usb/host/ehci-fsl.c | 3 ++-
drivers/usb/host/ehci-hub.c | 5 ++---
drivers/usb/host/ehci-pci.c | 4 ++--
drivers/usb/host/ehci.h | 8 ++++----
drivers/usb/host/ohci-pci.c | 2 +-
drivers/usb/host/uhci-hcd.c | 2 +-
include/linux/usb/hcd.h | 2 +-
9 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index f0156de8db670..e387e394f8762 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -386,7 +386,9 @@ static int hcd_pci_suspend(struct device *dev)
return retval;
if (hcd->driver->pci_suspend) {
- retval = hcd->driver->pci_suspend(hcd);
+ bool do_wakeup = device_may_wakeup(dev);
+
+ retval = hcd->driver->pci_suspend(hcd, do_wakeup);
suspend_report_result(hcd->driver->pci_suspend, retval);
if (retval)
return retval;
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index faa61748db703..2baf8a8490867 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -228,7 +228,7 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
* the root hub is either suspended or stopped.
*/
spin_lock_irqsave(&ehci->lock, flags);
- ehci_prepare_ports_for_controller_suspend(ehci);
+ ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 5cd967d28938f..a416421abfa2e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -313,7 +313,8 @@ static int ehci_fsl_drv_suspend(struct device *dev)
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
void __iomem *non_ehci = hcd->regs;
- ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd));
+ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+ device_may_wakeup(dev));
if (!fsl_deep_sleep())
return 0;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 0931f5a7dec4c..1292a5b2197ae 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
}
static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
- bool suspending)
+ bool suspending, bool do_wakeup)
{
int port;
u32 temp;
@@ -117,8 +117,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
* when the controller is suspended or resumed. In all other
* cases they don't need to be changed.
*/
- if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup ||
- device_may_wakeup(ehci_to_hcd(ehci)->self.controller))
+ if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
return;
/* clear phy low-power mode before changing wakeup flags */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a307d550bdafe..f555e4f35a04b 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -277,7 +277,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
* Also they depend on separate root hub suspend/resume.
*/
-static int ehci_pci_suspend(struct usb_hcd *hcd)
+static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
unsigned long flags;
@@ -291,7 +291,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd)
* the root hub is either suspended or stopped.
*/
spin_lock_irqsave (&ehci->lock, flags);
- ehci_prepare_ports_for_controller_suspend(ehci);
+ ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index e6c57cc416f68..a4a63ce290e90 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -540,11 +540,11 @@ struct ehci_fstn {
/* Prepare the PORTSC wakeup flags during controller suspend/resume */
-#define ehci_prepare_ports_for_controller_suspend(ehci) \
- ehci_adjust_port_wakeup_flags(ehci, true);
+#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \
+ ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup);
-#define ehci_prepare_ports_for_controller_resume(ehci) \
- ehci_adjust_port_wakeup_flags(ehci, false);
+#define ehci_prepare_ports_for_controller_resume(ehci) \
+ ehci_adjust_port_wakeup_flags(ehci, false, false);
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index b8a1148f248e4..6bdc8b25a6a10 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -392,7 +392,7 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd)
#ifdef CONFIG_PM
-static int ohci_pci_suspend(struct usb_hcd *hcd)
+static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 2743ec770f0cb..a7850f51fdc50 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -788,7 +788,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
return rc;
}
-static int uhci_pci_suspend(struct usb_hcd *hcd)
+static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int rc = 0;
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index f8f8fa7a56e89..ae10020b4023f 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -211,7 +211,7 @@ struct hc_driver {
* a whole, not just the root hub; they're for PCI bus glue.
*/
/* called after suspending the hub, before entering D3 etc */
- int (*pci_suspend)(struct usb_hcd *hcd);
+ int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
/* called after entering D0 (etc), before resuming the hub */
int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
--
GitLab
From ee0b9be829803e3ff5adec7456bd59a08425ffa1 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 25 Jun 2010 14:02:24 -0400
Subject: [PATCH 761/863] USB: controller resume should check the root hub
This patch (as1394) adds code to ehci-hcd, ohci-hcd, and uhci-hcd for
automatically resuming the root hub when the controller is resumed, if
the root hub has a wakeup request pending on some port.
During resume from system sleep this doesn't matter, because the root
hubs will naturally be resumed along with every other device in the
system. However it _will_ matter for runtime PM: If the controller is
suspended and a remote wakeup request is received then the controller
will autoresume, but we need to ensure that the root hub also
autoresumes. Otherwise the wakeup request would be ignored, the
controller would go back to sleep, and the cycle would repeat a large
number of times (I saw this happen before the patch was written).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-hub.c | 4 ++++
drivers/usb/host/ohci-hub.c | 7 ++++++-
drivers/usb/host/uhci-hcd.c | 7 ++++---
drivers/usb/host/uhci-hub.c | 2 +-
4 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1292a5b2197ae..796ea0c8900f7 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -166,6 +166,10 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
}
}
+
+ /* Does the root hub have a port wakeup pending? */
+ if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
+ usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
}
static int ehci_bus_suspend (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 4dd39022c3884..cddcda95b5793 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -355,6 +355,11 @@ static void ohci_finish_controller_resume(struct usb_hcd *hcd)
ohci_readl(ohci, &ohci->regs->intrenable);
msleep(20);
}
+
+ /* Does the root hub have a port wakeup pending? */
+ if (ohci_readl(ohci, &ohci->regs->intrstatus) &
+ (OHCI_INTR_RD | OHCI_INTR_RHSC))
+ usb_hcd_resume_root_hub(hcd);
}
/* Carry out polling-, autostop-, and autoresume-related state changes */
@@ -364,7 +369,7 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int poll_rh = 1;
int rhsc_enable;
- /* Some broken controllers never turn off RHCS in the interrupt
+ /* Some broken controllers never turn off RHSC in the interrupt
* status register. For their sake we won't re-enable RHSC
* interrupts if the interrupt bit is already active.
*/
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index a7850f51fdc50..9d4d81248f96d 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -862,10 +862,11 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
/* If interrupts don't work and remote wakeup is enabled then
* the suspended root hub needs to be polled.
*/
- if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) {
+ if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup)
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
- usb_hcd_poll_rh_status(hcd);
- }
+
+ /* Does the root hub have a port wakeup pending? */
+ usb_hcd_poll_rh_status(hcd);
return 0;
}
#endif
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index f0c58116c0adf..6d59c0f77f250 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -200,7 +200,7 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
case UHCI_RH_SUSPENDING:
case UHCI_RH_SUSPENDED:
/* if port change, ask to be resumed */
- if (status)
+ if (status || uhci->resuming_ports)
usb_hcd_resume_root_hub(hcd);
break;
--
GitLab
From ff2f07874362d34684296f2bd5547a099f33c6d4 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 25 Jun 2010 14:02:35 -0400
Subject: [PATCH 762/863] USB: fix race between root-hub wakeup & controller
suspend
This patch (as1395) adds code to hcd_pci_suspend() for handling wakeup
races. This is another general race pattern, similar to the "open
vs. unregister" race we're all familiar with. Here, the race is
between suspending a device and receiving a wakeup request from one of
the device's suspended children.
In particular, if a root-hub wakeup is requested at about the same
time as the corresponding USB controller is suspended, and if the
controller is enabled for wakeup, then the controller should either
fail to suspend or else wake right back up again.
During system sleep this won't happen very much, especially since host
controllers generally aren't enabled for wakeup during sleep. However
it is definitely an issue for runtime PM. Something like this will be
needed to prevent the controller from autosuspending while waiting for
a root-hub resume to take place. (That is, in fact, the common case,
for which there is an extra test.)
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd-pci.c | 12 ++++++++++++
drivers/usb/core/hcd.c | 5 ++++-
include/linux/usb/hcd.h | 2 ++
3 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index e387e394f8762..352577baa53d8 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -388,8 +388,20 @@ static int hcd_pci_suspend(struct device *dev)
if (hcd->driver->pci_suspend) {
bool do_wakeup = device_may_wakeup(dev);
+ /* Optimization: Don't suspend if a root-hub wakeup is
+ * pending and it would cause the HCD to wake up anyway.
+ */
+ if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
+ return -EBUSY;
retval = hcd->driver->pci_suspend(hcd, do_wakeup);
suspend_report_result(hcd->driver->pci_suspend, retval);
+
+ /* Check again in case wakeup raced with pci_suspend */
+ if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+ if (hcd->driver->pci_resume)
+ hcd->driver->pci_resume(hcd, false);
+ retval = -EBUSY;
+ }
if (retval)
return retval;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index f2fe7c8e991d7..0358c05e6e8a1 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1940,6 +1940,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
dev_dbg(&rhdev->dev, "usb %s%s\n",
(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
+ clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
if (!hcd->driver->bus_resume)
return -ENOENT;
if (hcd->state == HC_STATE_RUNNING)
@@ -1993,8 +1994,10 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
unsigned long flags;
spin_lock_irqsave (&hcd_root_hub_lock, flags);
- if (hcd->rh_registered)
+ if (hcd->rh_registered) {
+ set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
queue_work(pm_wq, &hcd->wakeup_work);
+ }
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index ae10020b4023f..3b571f1ffbb3a 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -98,6 +98,7 @@ struct usb_hcd {
#define HCD_FLAG_SAW_IRQ 1
#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
+#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
/* The flags can be tested using these macros; they are likely to
* be slightly faster than test_bit().
@@ -106,6 +107,7 @@ struct usb_hcd {
#define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ))
#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
/* Flags that get set only during HCD registration or removal. */
unsigned rh_registered:1;/* is root hub registered? */
--
GitLab
From 0d436b425e07f9e4b0fe571cec061f5d136f1d8b Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 25 Jun 2010 14:02:49 -0400
Subject: [PATCH 763/863] USB: UHCI: add support for Intel's wakeup flags
This patch (as1396) adds code to uhci-hcd to support the
vendor-specific wakeup settings found in Intel's ICHx hardware. A
couple of unnecessary memory barriers are removed. And the root hub
isn't put back into the "suspended" state if power was lost during a
system sleep -- there's not much point in doing so because the root hub
will be resumed shortly.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/uhci-hcd.c | 30 +++++++++++++++++-------------
drivers/usb/host/uhci-hcd.h | 7 ++++++-
2 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 9d4d81248f96d..b04506036b642 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -176,6 +176,8 @@ static void check_and_reset_hc(struct uhci_hcd *uhci)
*/
static void configure_hc(struct uhci_hcd *uhci)
{
+ struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
+
/* Set the frame length to the default: 1 ms exactly */
outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
@@ -191,8 +193,11 @@ static void configure_hc(struct uhci_hcd *uhci)
mb();
/* Enable PIRQ */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_DEFAULT);
+ pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
+
+ /* Disable platform-specific non-PME# wakeup */
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ pci_write_config_byte(pdev, USBRES_INTEL, 0);
}
@@ -791,6 +796,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
int rc = 0;
dev_dbg(uhci_dev(uhci), "%s\n", __func__);
@@ -808,11 +814,15 @@ static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
/* All PCI host controllers are required to disable IRQ generation
* at the source, so we must turn off PIRQ.
*/
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
- mb();
+ pci_write_config_word(pdev, USBLEGSUP, 0);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
- /* FIXME: Enable non-PME# remote wakeup? */
+ /* Enable platform-specific non-PME# wakeup */
+ if (do_wakeup) {
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ pci_write_config_byte(pdev, USBRES_INTEL,
+ USBPORT1EN | USBPORT2EN);
+ }
done_okay:
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -831,7 +841,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
* even if the controller was dead.
*/
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- mb();
spin_lock_irq(&uhci->lock);
@@ -839,8 +848,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
if (hibernated)
uhci_hc_died(uhci);
- /* FIXME: Disable non-PME# remote wakeup? */
-
/* The firmware or a boot kernel may have changed the controller
* settings during a system wakeup. Check it and reconfigure
* to avoid problems.
@@ -850,12 +857,9 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
/* If the controller was dead before, it's back alive now */
configure_hc(uhci);
- if (uhci->rh_state == UHCI_RH_RESET) {
-
- /* The controller had to be reset */
+ /* Tell the core if the controller had to be reset */
+ if (uhci->rh_state == UHCI_RH_RESET)
usb_root_hub_lost_power(hcd->self.root_hub);
- suspend_rh(uhci, UHCI_RH_SUSPENDED);
- }
spin_unlock_irq(&uhci->lock);
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 26bd1b2bcbfc8..49bf2790f9c22 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -67,12 +67,17 @@
#define USBPORTSC_RES3 0x4000 /* reserved, write zeroes */
#define USBPORTSC_RES4 0x8000 /* reserved, write zeroes */
-/* Legacy support register */
+/* PCI legacy support register */
#define USBLEGSUP 0xc0
#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
#define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
+/* PCI Intel-specific resume-enable register */
+#define USBRES_INTEL 0xc4
+#define USBPORT1EN 0x01
+#define USBPORT2EN 0x02
+
#define UHCI_PTR_BITS cpu_to_le32(0x000F)
#define UHCI_PTR_TERM cpu_to_le32(0x0001)
#define UHCI_PTR_QH cpu_to_le32(0x0002)
--
GitLab
From 3da7cff4e79e4a7137b0dac1aaf6841b91bbff63 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 25 Jun 2010 14:02:57 -0400
Subject: [PATCH 764/863] USB: add runtime PM for PCI-based host controllers
This patch (as1386) adds runtime-PM support for PCI-based USB host
controllers. By default autosuspend is disallowed; the user must
enable it by writing "auto" to the controller's power/control sysfs
attribute.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd-pci.c | 76 +++++++++++++++++++++++++++++++-------
1 file changed, 62 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 352577baa53d8..fe6b8d40a5064 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -250,6 +250,9 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (retval != 0)
goto err4;
set_hs_companion(dev, hcd);
+
+ if (pci_dev_run_wake(dev))
+ pm_runtime_put_noidle(&dev->dev);
return retval;
err4:
@@ -292,6 +295,9 @@ void usb_hcd_pci_remove(struct pci_dev *dev)
if (!hcd)
return;
+ if (pci_dev_run_wake(dev))
+ pm_runtime_get_noresume(&dev->dev);
+
/* Fake an interrupt request in order to give the driver a chance
* to test whether the controller hardware has been removed (e.g.,
* cardbus physical eject).
@@ -325,12 +331,13 @@ void usb_hcd_pci_shutdown(struct pci_dev *dev)
if (!hcd)
return;
- if (hcd->driver->shutdown)
+ if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
+ hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_OPS
#ifdef CONFIG_PPC_PMAC
static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
@@ -366,7 +373,7 @@ static int check_root_hub_suspended(struct device *dev)
return 0;
}
-static int hcd_pci_suspend(struct device *dev)
+static int suspend_common(struct device *dev, bool do_wakeup)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
@@ -381,13 +388,7 @@ static int hcd_pci_suspend(struct device *dev)
if (retval)
return retval;
- /* We might already be suspended (runtime PM -- not yet written) */
- if (pci_dev->current_state != PCI_D0)
- return retval;
-
if (hcd->driver->pci_suspend) {
- bool do_wakeup = device_may_wakeup(dev);
-
/* Optimization: Don't suspend if a root-hub wakeup is
* pending and it would cause the HCD to wake up anyway.
*/
@@ -439,10 +440,8 @@ static int resume_common(struct device *dev, int event)
clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
if (hcd->driver->pci_resume) {
- /* This call should be made only during system resume,
- * not during runtime resume.
- */
- wait_for_companions(pci_dev, hcd);
+ if (event != PM_EVENT_AUTO_RESUME)
+ wait_for_companions(pci_dev, hcd);
retval = hcd->driver->pci_resume(hcd,
event == PM_EVENT_RESTORE);
@@ -454,6 +453,13 @@ static int resume_common(struct device *dev, int event)
return retval;
}
+#ifdef CONFIG_PM_SLEEP
+
+static int hcd_pci_suspend(struct device *dev)
+{
+ return suspend_common(dev, device_may_wakeup(dev));
+}
+
static int hcd_pci_suspend_noirq(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -513,6 +519,46 @@ static int hcd_pci_restore(struct device *dev)
return resume_common(dev, PM_EVENT_RESTORE);
}
+#else
+
+#define hcd_pci_suspend NULL
+#define hcd_pci_suspend_noirq NULL
+#define hcd_pci_resume_noirq NULL
+#define hcd_pci_resume NULL
+#define hcd_pci_restore NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int hcd_pci_runtime_suspend(struct device *dev)
+{
+ int retval;
+
+ retval = suspend_common(dev, true);
+ if (retval == 0)
+ powermac_set_asic(to_pci_dev(dev), 0);
+ dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
+ return retval;
+}
+
+static int hcd_pci_runtime_resume(struct device *dev)
+{
+ int retval;
+
+ powermac_set_asic(to_pci_dev(dev), 1);
+ retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
+ dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
+ return retval;
+}
+
+#else
+
+#define hcd_pci_runtime_suspend NULL
+#define hcd_pci_runtime_resume NULL
+
+#endif /* CONFIG_PM_RUNTIME */
+
const struct dev_pm_ops usb_hcd_pci_pm_ops = {
.suspend = hcd_pci_suspend,
.suspend_noirq = hcd_pci_suspend_noirq,
@@ -526,7 +572,9 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
.poweroff_noirq = hcd_pci_suspend_noirq,
.restore_noirq = hcd_pci_resume_noirq,
.restore = hcd_pci_restore,
+ .runtime_suspend = hcd_pci_runtime_suspend,
+ .runtime_resume = hcd_pci_runtime_resume,
};
EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
-#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM_OPS */
--
GitLab
From 916de0272018482c35402d410869353003051eb9 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Fri, 25 Jun 2010 20:25:37 +0200
Subject: [PATCH 765/863] USB: usblp: fixed switch, brace, whitespace and
spacing coding style issues
Fixed switch, brace, whitespace and spacing coding style issues.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/class/usblp.c | 371 +++++++++++++++++++-------------------
1 file changed, 185 insertions(+), 186 deletions(-)
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 84f9e52327f22..e325162859b0b 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -135,7 +135,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:H
* ->lock locks what interrupt accesses.
*/
struct usblp {
- struct usb_device *dev; /* USB device */
+ struct usb_device *dev; /* USB device */
struct mutex wmut;
struct mutex mut;
spinlock_t lock; /* locks rcomplete, wcomplete */
@@ -169,7 +169,8 @@ struct usblp {
};
#ifdef DEBUG
-static void usblp_dump(struct usblp *usblp) {
+static void usblp_dump(struct usblp *usblp)
+{
int p;
dbg("usblp=0x%p", usblp);
@@ -216,8 +217,8 @@ static const struct quirk_printer_struct quirk_printers[] = {
{ 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
{ 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
{ 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
- { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
- { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
+ { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
+ { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
{ 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
{ 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
{ 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
@@ -254,9 +255,8 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i
/* High byte has the interface index.
Low byte has the alternate setting.
*/
- if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) {
- index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
- }
+ if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
+ index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
retval = usb_control_msg(usblp->dev,
dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
@@ -372,7 +372,7 @@ static int usblp_check_status(struct usblp *usblp, int err)
return newerr;
}
-static int handle_bidir (struct usblp *usblp)
+static int handle_bidir(struct usblp *usblp)
{
if (usblp->bidir && usblp->used) {
if (usblp_submit_read(usblp) < 0)
@@ -395,14 +395,13 @@ static int usblp_open(struct inode *inode, struct file *file)
if (minor < 0)
return -ENODEV;
- mutex_lock (&usblp_mutex);
+ mutex_lock(&usblp_mutex);
retval = -ENODEV;
intf = usb_find_interface(&usblp_driver, minor);
- if (!intf) {
+ if (!intf)
goto out;
- }
- usblp = usb_get_intfdata (intf);
+ usblp = usb_get_intfdata(intf);
if (!usblp || !usblp->dev || !usblp->present)
goto out;
@@ -433,18 +432,18 @@ static int usblp_open(struct inode *inode, struct file *file)
retval = -EIO;
}
out:
- mutex_unlock (&usblp_mutex);
+ mutex_unlock(&usblp_mutex);
return retval;
}
-static void usblp_cleanup (struct usblp *usblp)
+static void usblp_cleanup(struct usblp *usblp)
{
printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
kfree(usblp->readbuf);
- kfree (usblp->device_id_string);
- kfree (usblp->statusbuf);
- kfree (usblp);
+ kfree(usblp->device_id_string);
+ kfree(usblp->statusbuf);
+ kfree(usblp);
}
static void usblp_unlink_urbs(struct usblp *usblp)
@@ -458,14 +457,14 @@ static int usblp_release(struct inode *inode, struct file *file)
usblp->flags &= ~LP_ABORT;
- mutex_lock (&usblp_mutex);
+ mutex_lock(&usblp_mutex);
usblp->used = 0;
if (usblp->present) {
usblp_unlink_urbs(usblp);
usb_autopm_put_interface(usblp->intf);
- } else /* finish cleanup from disconnect */
- usblp_cleanup (usblp);
- mutex_unlock (&usblp_mutex);
+ } else /* finish cleanup from disconnect */
+ usblp_cleanup(usblp);
+ mutex_unlock(&usblp_mutex);
return 0;
}
@@ -495,190 +494,190 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
int twoints[2];
int retval = 0;
- mutex_lock (&usblp->mut);
+ mutex_lock(&usblp->mut);
if (!usblp->present) {
retval = -ENODEV;
goto done;
}
dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd),
- _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) );
+ _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
switch (_IOC_NR(cmd)) {
- case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
- if (_IOC_DIR(cmd) != _IOC_READ) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
+ if (_IOC_DIR(cmd) != _IOC_READ) {
+ retval = -EINVAL;
+ goto done;
+ }
- length = usblp_cache_device_id_string(usblp);
- if (length < 0) {
- retval = length;
- goto done;
- }
- if (length > _IOC_SIZE(cmd))
- length = _IOC_SIZE(cmd); /* truncate */
-
- if (copy_to_user((void __user *) arg,
- usblp->device_id_string,
- (unsigned long) length)) {
- retval = -EFAULT;
- goto done;
- }
+ length = usblp_cache_device_id_string(usblp);
+ if (length < 0) {
+ retval = length;
+ goto done;
+ }
+ if (length > _IOC_SIZE(cmd))
+ length = _IOC_SIZE(cmd); /* truncate */
+
+ if (copy_to_user((void __user *) arg,
+ usblp->device_id_string,
+ (unsigned long) length)) {
+ retval = -EFAULT;
+ goto done;
+ }
- break;
+ break;
- case IOCNR_GET_PROTOCOLS:
- if (_IOC_DIR(cmd) != _IOC_READ ||
- _IOC_SIZE(cmd) < sizeof(twoints)) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_GET_PROTOCOLS:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
- twoints[0] = usblp->current_protocol;
- twoints[1] = 0;
- for (i = USBLP_FIRST_PROTOCOL;
- i <= USBLP_LAST_PROTOCOL; i++) {
- if (usblp->protocol[i].alt_setting >= 0)
- twoints[1] |= (1<<i);
- }
+ twoints[0] = usblp->current_protocol;
+ twoints[1] = 0;
+ for (i = USBLP_FIRST_PROTOCOL;
+ i <= USBLP_LAST_PROTOCOL; i++) {
+ if (usblp->protocol[i].alt_setting >= 0)
+ twoints[1] |= (1<<i);
+ }
- if (copy_to_user((void __user *)arg,
- (unsigned char *)twoints,
- sizeof(twoints))) {
- retval = -EFAULT;
- goto done;
- }
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
- break;
+ break;
- case IOCNR_SET_PROTOCOL:
- if (_IOC_DIR(cmd) != _IOC_WRITE) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_SET_PROTOCOL:
+ if (_IOC_DIR(cmd) != _IOC_WRITE) {
+ retval = -EINVAL;
+ goto done;
+ }
#ifdef DEBUG
- if (arg == -10) {
- usblp_dump(usblp);
- break;
- }
+ if (arg == -10) {
+ usblp_dump(usblp);
+ break;
+ }
#endif
- usblp_unlink_urbs(usblp);
- retval = usblp_set_protocol(usblp, arg);
- if (retval < 0) {
- usblp_set_protocol(usblp,
- usblp->current_protocol);
- }
- break;
+ usblp_unlink_urbs(usblp);
+ retval = usblp_set_protocol(usblp, arg);
+ if (retval < 0) {
+ usblp_set_protocol(usblp,
+ usblp->current_protocol);
+ }
+ break;
- case IOCNR_HP_SET_CHANNEL:
- if (_IOC_DIR(cmd) != _IOC_WRITE ||
- le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
- usblp->quirks & USBLP_QUIRK_BIDIR) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_HP_SET_CHANNEL:
+ if (_IOC_DIR(cmd) != _IOC_WRITE ||
+ le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
+ usblp->quirks & USBLP_QUIRK_BIDIR) {
+ retval = -EINVAL;
+ goto done;
+ }
- err = usblp_hp_channel_change_request(usblp,
- arg, &newChannel);
- if (err < 0) {
- dev_err(&usblp->dev->dev,
- "usblp%d: error = %d setting "
- "HP channel\n",
- usblp->minor, err);
- retval = -EIO;
- goto done;
- }
+ err = usblp_hp_channel_change_request(usblp,
+ arg, &newChannel);
+ if (err < 0) {
+ dev_err(&usblp->dev->dev,
+ "usblp%d: error = %d setting "
+ "HP channel\n",
+ usblp->minor, err);
+ retval = -EIO;
+ goto done;
+ }
- dbg("usblp%d requested/got HP channel %ld/%d",
- usblp->minor, arg, newChannel);
- break;
+ dbg("usblp%d requested/got HP channel %ld/%d",
+ usblp->minor, arg, newChannel);
+ break;
- case IOCNR_GET_BUS_ADDRESS:
- if (_IOC_DIR(cmd) != _IOC_READ ||
- _IOC_SIZE(cmd) < sizeof(twoints)) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_GET_BUS_ADDRESS:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
- twoints[0] = usblp->dev->bus->busnum;
- twoints[1] = usblp->dev->devnum;
- if (copy_to_user((void __user *)arg,
- (unsigned char *)twoints,
- sizeof(twoints))) {
- retval = -EFAULT;
- goto done;
- }
+ twoints[0] = usblp->dev->bus->busnum;
+ twoints[1] = usblp->dev->devnum;
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
- dbg("usblp%d is bus=%d, device=%d",
- usblp->minor, twoints[0], twoints[1]);
- break;
+ dbg("usblp%d is bus=%d, device=%d",
+ usblp->minor, twoints[0], twoints[1]);
+ break;
- case IOCNR_GET_VID_PID:
- if (_IOC_DIR(cmd) != _IOC_READ ||
- _IOC_SIZE(cmd) < sizeof(twoints)) {
- retval = -EINVAL;
- goto done;
- }
+ case IOCNR_GET_VID_PID:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
- twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
- twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
- if (copy_to_user((void __user *)arg,
- (unsigned char *)twoints,
- sizeof(twoints))) {
- retval = -EFAULT;
- goto done;
- }
+ twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
+ twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
- dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
- usblp->minor, twoints[0], twoints[1]);
- break;
+ dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
+ usblp->minor, twoints[0], twoints[1]);
+ break;
- case IOCNR_SOFT_RESET:
- if (_IOC_DIR(cmd) != _IOC_NONE) {
- retval = -EINVAL;
- goto done;
- }
- retval = usblp_reset(usblp);
- break;
- default:
- retval = -ENOTTY;
+ case IOCNR_SOFT_RESET:
+ if (_IOC_DIR(cmd) != _IOC_NONE) {
+ retval = -EINVAL;
+ goto done;
+ }
+ retval = usblp_reset(usblp);
+ break;
+ default:
+ retval = -ENOTTY;
}
else /* old-style ioctl value */
switch (cmd) {
- case LPGETSTATUS:
- if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
- if (printk_ratelimit())
- printk(KERN_ERR "usblp%d:"
- "failed reading printer status (%d)\n",
- usblp->minor, retval);
- retval = -EIO;
- goto done;
- }
- status = *usblp->statusbuf;
- if (copy_to_user ((void __user *)arg, &status, sizeof(int)))
- retval = -EFAULT;
- break;
+ case LPGETSTATUS:
+ if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
+ if (printk_ratelimit())
+ printk(KERN_ERR "usblp%d:"
+ "failed reading printer status (%d)\n",
+ usblp->minor, retval);
+ retval = -EIO;
+ goto done;
+ }
+ status = *usblp->statusbuf;
+ if (copy_to_user((void __user *)arg, &status, sizeof(int)))
+ retval = -EFAULT;
+ break;
- case LPABORT:
- if (arg)
- usblp->flags |= LP_ABORT;
- else
- usblp->flags &= ~LP_ABORT;
- break;
+ case LPABORT:
+ if (arg)
+ usblp->flags |= LP_ABORT;
+ else
+ usblp->flags &= ~LP_ABORT;
+ break;
- default:
- retval = -ENOTTY;
+ default:
+ retval = -ENOTTY;
}
done:
- mutex_unlock (&usblp->mut);
+ mutex_unlock(&usblp->mut);
return retval;
}
@@ -840,7 +839,7 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, lo
}
done:
- mutex_unlock (&usblp->mut);
+ mutex_unlock(&usblp->mut);
return count;
}
@@ -1023,7 +1022,7 @@ static int usblp_submit_read(struct usblp *usblp)
* while you are sending print data, and you don't try to query the
* printer status every couple of milliseconds, you will probably be OK.
*/
-static unsigned int usblp_quirks (__u16 vendor, __u16 product)
+static unsigned int usblp_quirks(__u16 vendor, __u16 product)
{
int i;
@@ -1031,7 +1030,7 @@ static unsigned int usblp_quirks (__u16 vendor, __u16 product)
if (vendor == quirk_printers[i].vendorId &&
product == quirk_printers[i].productId)
return quirk_printers[i].quirks;
- }
+ }
return 0;
}
@@ -1061,7 +1060,7 @@ static struct usb_class_driver usblp_class = {
static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_interface *intf = to_usb_interface(dev);
- struct usblp *usblp = usb_get_intfdata (intf);
+ struct usblp *usblp = usb_get_intfdata(intf);
if (usblp->device_id_string[0] == 0 &&
usblp->device_id_string[1] == 0)
@@ -1075,7 +1074,7 @@ static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL);
static int usblp_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- struct usb_device *dev = interface_to_usbdev (intf);
+ struct usb_device *dev = interface_to_usbdev(intf);
struct usblp *usblp;
int protocol;
int retval;
@@ -1089,7 +1088,7 @@ static int usblp_probe(struct usb_interface *intf,
}
usblp->dev = dev;
mutex_init(&usblp->wmut);
- mutex_init (&usblp->mut);
+ mutex_init(&usblp->mut);
spin_lock_init(&usblp->lock);
init_waitqueue_head(&usblp->rwait);
init_waitqueue_head(&usblp->wwait);
@@ -1153,7 +1152,7 @@ static int usblp_probe(struct usb_interface *intf,
usblp_check_status(usblp, 0);
#endif
- usb_set_intfdata (intf, usblp);
+ usb_set_intfdata(intf, usblp);
usblp->present = 1;
@@ -1177,7 +1176,7 @@ static int usblp_probe(struct usb_interface *intf,
return 0;
abort_intfdata:
- usb_set_intfdata (intf, NULL);
+ usb_set_intfdata(intf, NULL);
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
abort:
kfree(usblp->readbuf);
@@ -1340,35 +1339,35 @@ static int usblp_cache_device_id_string(struct usblp *usblp)
static void usblp_disconnect(struct usb_interface *intf)
{
- struct usblp *usblp = usb_get_intfdata (intf);
+ struct usblp *usblp = usb_get_intfdata(intf);
usb_deregister_dev(intf, &usblp_class);
if (!usblp || !usblp->dev) {
dev_err(&intf->dev, "bogus disconnect\n");
- BUG ();
+ BUG();
}
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
- mutex_lock (&usblp_mutex);
- mutex_lock (&usblp->mut);
+ mutex_lock(&usblp_mutex);
+ mutex_lock(&usblp->mut);
usblp->present = 0;
wake_up(&usblp->wwait);
wake_up(&usblp->rwait);
- usb_set_intfdata (intf, NULL);
+ usb_set_intfdata(intf, NULL);
usblp_unlink_urbs(usblp);
- mutex_unlock (&usblp->mut);
+ mutex_unlock(&usblp->mut);
if (!usblp->used)
- usblp_cleanup (usblp);
- mutex_unlock (&usblp_mutex);
+ usblp_cleanup(usblp);
+ mutex_unlock(&usblp_mutex);
}
static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
{
- struct usblp *usblp = usb_get_intfdata (intf);
+ struct usblp *usblp = usb_get_intfdata(intf);
usblp_unlink_urbs(usblp);
#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
@@ -1382,10 +1381,10 @@ static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
static int usblp_resume(struct usb_interface *intf)
{
- struct usblp *usblp = usb_get_intfdata (intf);
+ struct usblp *usblp = usb_get_intfdata(intf);
int r;
- r = handle_bidir (usblp);
+ r = handle_bidir(usblp);
return r;
}
@@ -1401,7 +1400,7 @@ static const struct usb_device_id usblp_ids[] = {
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, usblp_ids);
+MODULE_DEVICE_TABLE(usb, usblp_ids);
static struct usb_driver usblp_driver = {
.name = "usblp",
@@ -1426,8 +1425,8 @@ static void __exit usblp_exit(void)
module_init(usblp_init);
module_exit(usblp_exit);
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
module_param(proto_bias, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
MODULE_LICENSE("GPL");
--
GitLab
From f9ff70c25a7779cf6e2b0ff4aecf9c9b28eefae6 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Sun, 27 Jun 2010 17:27:51 +0200
Subject: [PATCH 766/863] USB: drivers/usb/Makefile: conditionally descend to
'early'
Don't descend to the EARLY_PRINTK_DBGP directory
unless it is actually used.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 80b4008c89baf..239f050efa35c 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -41,7 +41,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-y += early/
+obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
--
GitLab
From e10fa4787f1fb9c8738dff955c272f30b7b63134 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Mon, 28 Jun 2010 15:55:46 +0400
Subject: [PATCH 767/863] USB: xhci: trivial: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-mem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 2eb658d263947..6d8f7e32932a8 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1588,7 +1588,7 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
unsigned int num_tests;
int i, ret;
- num_tests = sizeof(simple_test_vector) / sizeof(simple_test_vector[0]);
+ num_tests = ARRAY_SIZE(simple_test_vector);
for (i = 0; i < num_tests; i++) {
ret = xhci_test_trb_in_td(xhci,
xhci->event_ring->first_seg,
@@ -1601,7 +1601,7 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
return ret;
}
- num_tests = sizeof(complex_test_vector) / sizeof(complex_test_vector[0]);
+ num_tests = ARRAY_SIZE(complex_test_vector);
for (i = 0; i < num_tests; i++) {
ret = xhci_test_trb_in_td(xhci,
complex_test_vector[i].input_seg,
--
GitLab
From 4307a28eb0128417d9a2b9d858d2bce70ee5b383 Mon Sep 17 00:00:00 2001
From: Andrea Righi <arighi@develer.com>
Date: Mon, 28 Jun 2010 16:56:45 +0200
Subject: [PATCH 768/863] USB: EHCI: fix NULL pointer dererence in HCDs that
use HCD_LOCAL_MEM
If we use the HCD_LOCAL_MEM flag and dma_declare_coherent_memory() to
enforce the host controller's local memory utilization we also need to
disable native scatter-gather support, otherwise hcd_alloc_coherent() in
map_urb_for_dma() is called with urb->transfer_buffer == NULL, that
triggers a NULL pointer dereference.
We can also consider to add a WARN_ON() and return an error code to
better catch this problem in the future.
At the moment no driver seems to hit this bug, so I should
consider this a low-priority fix.
Signed-off-by: Andrea Righi <arighi@develer.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd.c | 5 +++++
drivers/usb/host/ehci-hcd.c | 3 ++-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 0358c05e6e8a1..c5753c797735d 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1218,6 +1218,11 @@ static int hcd_alloc_coherent(struct usb_bus *bus,
{
unsigned char *vaddr;
+ if (*vaddr_handle == NULL) {
+ WARN_ON_ONCE(1);
+ return -EFAULT;
+ }
+
vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
mem_flags, dma_handle);
if (!vaddr)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2a19336c9824f..2e704fa3cedfb 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -629,7 +629,8 @@ static int ehci_init(struct usb_hcd *hcd)
ehci->command = temp;
/* Accept arbitrarily long scatter-gather lists */
- hcd->self.sg_tablesize = ~0;
+ if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+ hcd->self.sg_tablesize = ~0;
return 0;
}
--
GitLab
From 1e413943fabdc228e86e4fbaa11e77efa861c23f Mon Sep 17 00:00:00 2001
From: stephane duverger <stephane.duverger@gmail.com>
Date: Tue, 29 Jun 2010 16:57:25 +0200
Subject: [PATCH 769/863] USB: gadget: compilation issue: missing
TASK_INTERRUPTIBLE
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Here is the patch for the following issue:
drivers/usb/gadget/u_serial.c: In function ‘gs_start_tx’:
drivers/usb/gadget/u_serial.c:369: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function)
drivers/usb/gadget/u_serial.c:369: error: (Each undeclared identifier is reported only once
drivers/usb/gadget/u_serial.c:369: error: for each function it appears in.)
drivers/usb/gadget/u_serial.c: In function ‘gs_rx_push’:
drivers/usb/gadget/u_serial.c:546: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function)
drivers/usb/gadget/u_serial.c: In function ‘gs_close’:
drivers/usb/gadget/u_serial.c:857: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function)
drivers/usb/gadget/u_serial.c:857: error: implicit declaration of function ‘signal_pending’
drivers/usb/gadget/u_serial.c:857: error: implicit declaration of function ‘schedule_timeout’
drivers/usb/gadget/u_serial.c: In function ‘gserial_cleanup’:
drivers/usb/gadget/u_serial.c:1190: error: ‘TASK_UNINTERRUPTIBLE’ undeclared (first use in this function)
drivers/usb/gadget/u_serial.c:1190: error: implicit declaration of function ‘schedule’
drivers/usb/gadget/u_serial.c: In function ‘gserial_disconnect’:
drivers/usb/gadget/u_serial.c:1311: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function)
Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/u_serial.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 3e8dcb5455e3a..01e5354a4c20f 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -18,6 +18,7 @@
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
--
GitLab
From d0893264db29b9bfdb1bc66e731f4ed7f8b52795 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 5 Jul 2010 16:38:04 +0200
Subject: [PATCH 770/863] USB: gadget: storage_common: comments updated
Updated comment to describe why printing macros are needed even
thought they are copied form the composite.h. Also, made multiline
comments follow the coding standard.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/storage_common.c | 69 ++++++++++++++++++++---------
1 file changed, 48 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 04c462ff0ea6a..a10faecfabcd9 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -57,10 +57,12 @@
#include <asm/unaligned.h>
-/* Thanks to NetChip Technologies for donating this product ID.
+/*
+ * Thanks to NetChip Technologies for donating this product ID.
*
* DO NOT REUSE THESE IDs with any other driver!! Ever!!
- * Instead: allocate your own, using normal USB-IF procedures. */
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
#define FSG_VENDOR_ID 0x0525 /* NetChip */
#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */
@@ -84,14 +86,27 @@
#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args)
#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args)
-/* Keep those macros in sync with thos in
- * include/linux/ubs/composite.h or else GCC will complain. If they
+/*
+ * Keep those macros in sync with those in
+ * include/linux/usb/composite.h or else GCC will complain. If they
* are identical (the same names of arguments, white spaces in the
* same places) GCC will allow redefinition otherwise (even if some
- * white space is removed or added) warning will be issued. No
- * checking if those symbols is defined is performed because warning
- * is desired when those macros were defined by someone else to mean
- * something else. */
+ * white space is removed or added) warning will be issued.
+ *
+ * Those macros are needed here because File Storage Gadget does not
+ * include the composite.h header. For composite gadgets those macros
+ * are redundant since composite.h is included any way.
+ *
+ * One could check whether those macros are already defined (which
+ * would indicate composite.h had been included) or not (which would
+ * indicate we were in FSG) but this is not done because a warning is
+ * desired if definitions here differ from the ones in composite.h.
+ *
+ * We want the definitions to match and be the same in File Storage
+ * Gadget as well as Mass Storage Function (and so composite gadgets
+ * using MSF). If someone changes them in composite.h it will produce
+ * a warning in this file when building MSF.
+ */
#define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args)
#define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args)
#define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args)
@@ -313,9 +328,11 @@ struct fsg_buffhd {
enum fsg_buffer_state state;
struct fsg_buffhd *next;
- /* The NetChip 2280 is faster, and handles some protocol faults
+ /*
+ * The NetChip 2280 is faster, and handles some protocol faults
* better, if we don't submit any short bulk-out read requests.
- * So we will record the intended request length here. */
+ * So we will record the intended request length here.
+ */
unsigned int bulk_out_intended_length;
struct usb_request *inreq;
@@ -395,8 +412,10 @@ fsg_intf_desc = {
.iInterface = FSG_STRING_INTERFACE,
};
-/* Three full-speed endpoint descriptors: bulk-in, bulk-out,
- * and interrupt-in. */
+/*
+ * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
+ * interrupt-in.
+ */
static struct usb_endpoint_descriptor
fsg_fs_bulk_in_desc = {
@@ -459,7 +478,7 @@ static struct usb_descriptor_header *fsg_fs_function[] = {
*
* That means alternate endpoint descriptors (bigger packets)
* and a "device qualifier" ... plus more construction options
- * for the config descriptor.
+ * for the configuration descriptor.
*/
static struct usb_endpoint_descriptor
fsg_hs_bulk_in_desc = {
@@ -547,8 +566,10 @@ static struct usb_gadget_strings fsg_stringtab = {
/*-------------------------------------------------------------------------*/
-/* If the next two routines are called while the gadget is registered,
- * the caller must own fsg->filesem for writing. */
+/*
+ * If the next two routines are called while the gadget is registered,
+ * the caller must own fsg->filesem for writing.
+ */
static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
{
@@ -587,8 +608,10 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
goto out;
}
- /* If we can't read the file, it's no good.
- * If we can't write the file, use it read-only. */
+ /*
+ * If we can't read the file, it's no good.
+ * If we can't write the file, use it read-only.
+ */
if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) {
LINFO(curlun, "file not readable: %s\n", filename);
goto out;
@@ -646,8 +669,10 @@ static void fsg_lun_close(struct fsg_lun *curlun)
/*-------------------------------------------------------------------------*/
-/* Sync the file data, don't bother with the metadata.
- * This code was copied from fs/buffer.c:sys_fdatasync(). */
+/*
+ * Sync the file data, don't bother with the metadata.
+ * This code was copied from fs/buffer.c:sys_fdatasync().
+ */
static int fsg_lun_fsync_sub(struct fsg_lun *curlun)
{
struct file *filp = curlun->filp;
@@ -728,8 +753,10 @@ static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr,
if (sscanf(buf, "%d", &i) != 1)
return -EINVAL;
- /* Allow the write-enable status to change only while the backing file
- * is closed. */
+ /*
+ * Allow the write-enable status to change only while the
+ * backing file is closed.
+ */
down_read(filesem);
if (fsg_lun_is_open(curlun)) {
LDBG(curlun, "read-only status change prevented\n");
--
GitLab
From 1e29709e2e577a862dbffe1c89f8033255a322bb Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 2 Jul 2010 00:36:43 +0200
Subject: [PATCH 771/863] USB: serial: io_ti: Don't return 0 if writing the
download record failed
If the write download record failed we shouldn't return 0.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/io_ti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 0fca2659206f4..03696b91bd6d0 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1321,7 +1321,7 @@ static int download_fw(struct edgeport_serial *serial)
kfree(header);
kfree(rom_desc);
kfree(ti_manuf_desc);
- return status;
+ return -EINVAL;
}
kfree(vheader);
--
GitLab
From 402e8dd697d9dbfc40645148d0f539a43b6fc3a6 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Sat, 3 Jul 2010 20:04:47 +0400
Subject: [PATCH 772/863] USB: core: hcd-pci: use for_each_pci_dev()
Use for_each_pci_dev() to simplify the code.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd-pci.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index fe6b8d40a5064..c3f98543caaf9 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -66,10 +66,7 @@ static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd,
* vice versa.
*/
companion = NULL;
- for (;;) {
- companion = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, companion);
- if (!companion)
- break;
+ for_each_pci_dev(companion) {
if (companion->bus != pdev->bus ||
PCI_SLOT(companion->devfn) != slot)
continue;
--
GitLab
From 0936fb5e92a90476959447ad8ae5d780afbbd930 Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Thu, 8 Jul 2010 14:02:59 +0530
Subject: [PATCH 773/863] USB: musb: use correct register widths in register
dumps
DMA_ADDR and DMA_COUNT are 32-bit registers, not 16-bit.
Marking them as 16-bit in the table causes only the lower
16-bits to be dumped and this is misleading.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/musb/musb_debugfs.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index bba76af0c0c6d..c79a5e30d4373 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -92,29 +92,29 @@ static const struct musb_register_map musb_regmap[] = {
{ "LS_EOF1", 0x7E, 8 },
{ "SOFT_RST", 0x7F, 8 },
{ "DMA_CNTLch0", 0x204, 16 },
- { "DMA_ADDRch0", 0x208, 16 },
- { "DMA_COUNTch0", 0x20C, 16 },
+ { "DMA_ADDRch0", 0x208, 32 },
+ { "DMA_COUNTch0", 0x20C, 32 },
{ "DMA_CNTLch1", 0x214, 16 },
- { "DMA_ADDRch1", 0x218, 16 },
- { "DMA_COUNTch1", 0x21C, 16 },
+ { "DMA_ADDRch1", 0x218, 32 },
+ { "DMA_COUNTch1", 0x21C, 32 },
{ "DMA_CNTLch2", 0x224, 16 },
- { "DMA_ADDRch2", 0x228, 16 },
- { "DMA_COUNTch2", 0x22C, 16 },
+ { "DMA_ADDRch2", 0x228, 32 },
+ { "DMA_COUNTch2", 0x22C, 32 },
{ "DMA_CNTLch3", 0x234, 16 },
- { "DMA_ADDRch3", 0x238, 16 },
- { "DMA_COUNTch3", 0x23C, 16 },
+ { "DMA_ADDRch3", 0x238, 32 },
+ { "DMA_COUNTch3", 0x23C, 32 },
{ "DMA_CNTLch4", 0x244, 16 },
- { "DMA_ADDRch4", 0x248, 16 },
- { "DMA_COUNTch4", 0x24C, 16 },
+ { "DMA_ADDRch4", 0x248, 32 },
+ { "DMA_COUNTch4", 0x24C, 32 },
{ "DMA_CNTLch5", 0x254, 16 },
- { "DMA_ADDRch5", 0x258, 16 },
- { "DMA_COUNTch5", 0x25C, 16 },
+ { "DMA_ADDRch5", 0x258, 32 },
+ { "DMA_COUNTch5", 0x25C, 32 },
{ "DMA_CNTLch6", 0x264, 16 },
- { "DMA_ADDRch6", 0x268, 16 },
- { "DMA_COUNTch6", 0x26C, 16 },
+ { "DMA_ADDRch6", 0x268, 32 },
+ { "DMA_COUNTch6", 0x26C, 32 },
{ "DMA_CNTLch7", 0x274, 16 },
- { "DMA_ADDRch7", 0x278, 16 },
- { "DMA_COUNTch7", 0x27C, 16 },
+ { "DMA_ADDRch7", 0x278, 32 },
+ { "DMA_COUNTch7", 0x27C, 32 },
{ } /* Terminating Entry */
};
--
GitLab
From d709d22eea927e42c911ac0ad151b56aeafd1b76 Mon Sep 17 00:00:00 2001
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Date: Thu, 8 Jul 2010 14:03:00 +0530
Subject: [PATCH 774/863] USB: musb: fix compilation warning in host only mode
Fixes below compilation warning when host only configuration is
selected.
drivers/usb/musb/musb_core.c: In function 'musb_stage0_irq':
drivers/usb/musb/musb_core.c:711: warning: unused variable 'mbase'
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/musb/musb_core.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3b795c56221f8..540c766c4f860 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -704,7 +704,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (int_usb & MUSB_INTR_CONNECT) {
struct usb_hcd *hcd = musb_to_hcd(musb);
- void __iomem *mbase = musb->mregs;
handled = IRQ_HANDLED;
musb->is_active = 1;
@@ -717,9 +716,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
if (is_peripheral_active(musb)) {
/* REVISIT HNP; just force disconnect */
}
- musb_writew(mbase, MUSB_INTRTXE, musb->epmask);
- musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe);
- musb_writeb(mbase, MUSB_INTRUSBE, 0xf7);
+ musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
+ musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+ musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
#endif
musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
|USB_PORT_STAT_HIGH_SPEED
--
GitLab
From 5128993b6f5f38bc567f3c246248ca29fd599132 Mon Sep 17 00:00:00 2001
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Date: Thu, 8 Jul 2010 14:03:01 +0530
Subject: [PATCH 775/863] USB: ulpi: fix compilation warning
Fixes below compilation warning from ulpi.h
include/linux/usb/ulpi.h:145:
warning: 'struct otg_io_access_ops' declared inside parameter list
include/linux/usb/ulpi.h:145:
warning: its scope is only this definition or declaration,
which is probably not what you want
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
include/linux/usb/ulpi.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 2369d07c3c87f..900d97b7096a2 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -11,6 +11,7 @@
#ifndef __LINUX_USB_ULPI_H
#define __LINUX_USB_ULPI_H
+#include <linux/usb/otg.h>
/*-------------------------------------------------------------------------*/
/*
--
GitLab
From 5aa4af2ce6a0643f32d47f21614817792b85298d Mon Sep 17 00:00:00 2001
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Date: Thu, 8 Jul 2010 14:03:02 +0530
Subject: [PATCH 776/863] USB: ehci_omap: fix device detect issue with modules
Currently devices don't get detected automatically if the ehci
module is inserted 2nd time onward. We need to disconnect and
reconnect the device for it to get detected and enumerated.
Resetting the USB PHY using PHY reset comamnd over ULPI fixes
this issue. Tested on OMAP3EVM.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-omap.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 5450e628157f4..116ae280053a6 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -38,6 +38,7 @@
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/usb/ulpi.h>
#include <plat/usb.h>
/*
@@ -236,6 +237,35 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
/*-------------------------------------------------------------------------*/
+static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+ unsigned reg = 0;
+
+ reg = ULPI_FUNC_CTRL_RESET
+ /* FUNCTION_CTRL_SET register */
+ | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT)
+ /* Write */
+ | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT)
+ /* PORTn */
+ | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT)
+ /* start ULPI access*/
+ | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
+
+ ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg);
+
+ /* Wait for ULPI access completion */
+ while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI)
+ & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) {
+ cpu_relax();
+
+ if (time_after(jiffies, timeout)) {
+ dev_dbg(omap->dev, "phy reset operation timed out\n");
+ break;
+ }
+ }
+}
+
/* omap_start_ehc
* - Start the TI USBHOST controller
*/
@@ -425,6 +455,12 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
gpio_set_value(omap->reset_gpio_port[1], 1);
}
+ /* Soft reset the PHY using PHY reset command over ULPI */
+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
+ omap_ehci_soft_phy_reset(omap, 0);
+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
+ omap_ehci_soft_phy_reset(omap, 1);
+
return 0;
err_sys_status:
--
GitLab
From 3f1a9696aed6814601078f3c430a8e432b625c66 Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Thu, 8 Jul 2010 16:34:54 +0530
Subject: [PATCH 777/863] USB: musb: Kill board specific pinmux from driver
file
This pin-muxing is best done in the board files. The driver should
not do this explicitly.
Also, this code causes a warning to be thrown when OMAP2430 and OMAP3/4
support are enabled in the same kernel.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/musb/omap2430.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index e06d65e36bf74..2111a241dd037 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -32,8 +32,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/mux.h>
-
#include "musb_core.h"
#include "omap2430.h"
@@ -194,10 +192,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
u32 l;
struct omap_musb_board_data *data = board_data;
-#if defined(CONFIG_ARCH_OMAP2430)
- omap_cfg_reg(AE5_2430_USB0HS_STP);
-#endif
-
/* We require some kind of external transceiver, hooked
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
--
GitLab
From 8ca47c8a7621835914c053caaec74e66147dd7dc Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Thu, 8 Jul 2010 16:34:55 +0530
Subject: [PATCH 778/863] USB: musb: do not override DMA mode in channel
program
There is no reason for the DMA channel program to override the
DMA mode passed down by its caller. Use the passed parameter
directly, and let the caller handle the decision on which mode
is to be used.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/musb/musbhsdma.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index dc66e4376d490..6dc107f252455 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -173,10 +173,7 @@ static int dma_channel_program(struct dma_channel *channel,
musb_channel->max_packet_sz = packet_sz;
channel->status = MUSB_DMA_STATUS_BUSY;
- if ((mode == 1) && (len >= packet_sz))
- configure_channel(channel, packet_sz, 1, dma_addr, len);
- else
- configure_channel(channel, packet_sz, 0, dma_addr, len);
+ configure_channel(channel, packet_sz, mode, dma_addr, len);
return true;
}
--
GitLab
From 7c7e2d00435bd8129c4bacb73fe4a2d4db4e7d7c Mon Sep 17 00:00:00 2001
From: Martin Enderleit <martin@martin-desktop.(none)>
Date: Sat, 10 Jul 2010 16:50:12 +0200
Subject: [PATCH 779/863] usb: storage: freecom: Fixed several coding style
issues.
Fixed several coding style issues in freecom.c.
Signed-off-by: Martin Enderleit <menderleit@gmail.com>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/storage/freecom.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 54cc94277acbb..6542ca40d5056 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -269,7 +269,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
/* The firmware will time-out commands after 20 seconds. Some commands
* can legitimately take longer than this, so we use a different
* command that only waits for the interrupt and then sends status,
- * without having to send a new ATAPI command to the device.
+ * without having to send a new ATAPI command to the device.
*
* NOTE: There is some indication that a data transfer after a timeout
* may not work, but that is a condition that should never happen.
@@ -324,14 +324,14 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
/* Find the length we desire to read. */
switch (srb->cmnd[0]) {
- case INQUIRY:
- case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
- case MODE_SENSE:
- case MODE_SENSE_10:
- length = le16_to_cpu(fst->Count);
- break;
- default:
- length = scsi_bufflen(srb);
+ case INQUIRY:
+ case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ length = le16_to_cpu(fst->Count);
+ break;
+ default:
+ length = scsi_bufflen(srb);
}
/* verify that this amount is legal */
@@ -414,7 +414,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
/* should never hit here -- filtered in usb.c */
US_DEBUGP ("freecom unimplemented direction: %d\n",
us->srb->sc_data_direction);
- // Return fail, SCSI seems to handle this better.
+ /* Return fail, SCSI seems to handle this better. */
return USB_STOR_TRANSPORT_FAILED;
break;
}
@@ -494,8 +494,7 @@ static void pdump (void *ibuffer, int length)
offset = 0;
}
offset += sprintf (line+offset, "%08x:", i);
- }
- else if ((i & 7) == 0) {
+ } else if ((i & 7) == 0) {
offset += sprintf (line+offset, " -");
}
offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
--
GitLab
From 925ce689bb31960c839804c19ef38d676f1939b9 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sun, 11 Jul 2010 23:18:56 +0200
Subject: [PATCH 780/863] USB: autoconvert trivial BKL users to private mutex
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.
None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.
Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.
file=$1
name=$2
if grep -q lock_kernel ${file} ; then
if grep -q 'include.*linux.mutex.h' ${file} ; then
sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
else
sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
fi
sed -i ${file} \
-e "/^#include.*linux.mutex.h/,$ {
1,/^\(static\|int\|long\)/ {
/^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);
} }" \
-e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
-e '/[ ]*cycle_kernel_lock();/d'
else
sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \
-e '/cycle_kernel_lock()/d'
fi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/printer.c | 7 ++++---
drivers/usb/misc/iowarrior.c | 15 ++++++++-------
drivers/usb/misc/rio500.c | 15 ++++++++-------
drivers/usb/misc/usblcd.c | 16 ++++++++--------
4 files changed, 28 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 88f05996aa025..cf241c371a71f 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -25,7 +25,7 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
@@ -70,6 +70,7 @@
#define DRIVER_DESC "Printer Gadget"
#define DRIVER_VERSION "2007 OCT 06"
+static DEFINE_MUTEX(printer_mutex);
static const char shortname [] = "printer";
static const char driver_desc [] = DRIVER_DESC;
@@ -476,7 +477,7 @@ printer_open(struct inode *inode, struct file *fd)
unsigned long flags;
int ret = -EBUSY;
- lock_kernel();
+ mutex_lock(&printer_mutex);
dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
spin_lock_irqsave(&dev->lock, flags);
@@ -492,7 +493,7 @@ printer_open(struct inode *inode, struct file *fd)
spin_unlock_irqrestore(&dev->lock, flags);
DBG(dev, "printer_open returned %x\n", ret);
- unlock_kernel();
+ mutex_unlock(&printer_mutex);
return ret;
}
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 7dc9d3c699844..82966458a0040 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <linux/poll.h>
#include <linux/usb/iowarrior.h>
@@ -61,6 +61,7 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/* Module parameters */
+static DEFINE_MUTEX(iowarrior_mutex);
static int debug = 0;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "debug=1 enables debugging messages");
@@ -493,7 +494,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
return -ENOMEM;
/* lock this object */
- lock_kernel();
+ mutex_lock(&iowarrior_mutex);
mutex_lock(&dev->mutex);
/* verify that the device wasn't unplugged */
@@ -585,7 +586,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
error_out:
/* unlock the device */
mutex_unlock(&dev->mutex);
- unlock_kernel();
+ mutex_unlock(&iowarrior_mutex);
kfree(buffer);
return retval;
}
@@ -602,12 +603,12 @@ static int iowarrior_open(struct inode *inode, struct file *file)
dbg("%s", __func__);
- lock_kernel();
+ mutex_lock(&iowarrior_mutex);
subminor = iminor(inode);
interface = usb_find_interface(&iowarrior_driver, subminor);
if (!interface) {
- unlock_kernel();
+ mutex_unlock(&iowarrior_mutex);
err("%s - error, can't find device for minor %d", __func__,
subminor);
return -ENODEV;
@@ -617,7 +618,7 @@ static int iowarrior_open(struct inode *inode, struct file *file)
dev = usb_get_intfdata(interface);
if (!dev) {
mutex_unlock(&iowarrior_open_disc_lock);
- unlock_kernel();
+ mutex_unlock(&iowarrior_mutex);
return -ENODEV;
}
@@ -644,7 +645,7 @@ static int iowarrior_open(struct inode *inode, struct file *file)
out:
mutex_unlock(&dev->mutex);
- unlock_kernel();
+ mutex_unlock(&iowarrior_mutex);
return retval;
}
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index a85771b1563d2..cc13ae61712a2 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -32,7 +32,7 @@
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/random.h>
#include <linux/poll.h>
@@ -72,6 +72,7 @@ struct rio_usb_data {
struct mutex lock; /* general race avoidance */
};
+static DEFINE_MUTEX(rio500_mutex);
static struct rio_usb_data rio_instance;
static int open_rio(struct inode *inode, struct file *file)
@@ -79,12 +80,12 @@ static int open_rio(struct inode *inode, struct file *file)
struct rio_usb_data *rio = &rio_instance;
/* against disconnect() */
- lock_kernel();
+ mutex_lock(&rio500_mutex);
mutex_lock(&(rio->lock));
if (rio->isopen || !rio->present) {
mutex_unlock(&(rio->lock));
- unlock_kernel();
+ mutex_unlock(&rio500_mutex);
return -EBUSY;
}
rio->isopen = 1;
@@ -94,7 +95,7 @@ static int open_rio(struct inode *inode, struct file *file)
mutex_unlock(&(rio->lock));
dev_info(&rio->rio_dev->dev, "Rio opened.\n");
- unlock_kernel();
+ mutex_unlock(&rio500_mutex);
return 0;
}
@@ -491,7 +492,7 @@ static void disconnect_rio(struct usb_interface *intf)
struct rio_usb_data *rio = usb_get_intfdata (intf);
usb_set_intfdata (intf, NULL);
- lock_kernel();
+ mutex_lock(&rio500_mutex);
if (rio) {
usb_deregister_dev(intf, &usb_rio_class);
@@ -501,7 +502,7 @@ static void disconnect_rio(struct usb_interface *intf)
/* better let it finish - the release will do whats needed */
rio->rio_dev = NULL;
mutex_unlock(&(rio->lock));
- unlock_kernel();
+ mutex_unlock(&rio500_mutex);
return;
}
kfree(rio->ibuf);
@@ -512,7 +513,7 @@ static void disconnect_rio(struct usb_interface *intf)
rio->present = 0;
mutex_unlock(&(rio->lock));
}
- unlock_kernel();
+ mutex_unlock(&rio500_mutex);
}
static const struct usb_device_id rio_table[] = {
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 7828c764b3232..6ae39e3e5046c 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
@@ -30,6 +29,7 @@
#define IOCTL_GET_DRV_VERSION 2
+static DEFINE_MUTEX(lcd_mutex);
static const struct usb_device_id id_table[] = {
{ .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, },
{ },
@@ -74,12 +74,12 @@ static int lcd_open(struct inode *inode, struct file *file)
struct usb_interface *interface;
int subminor, r;
- lock_kernel();
+ mutex_lock(&lcd_mutex);
subminor = iminor(inode);
interface = usb_find_interface(&lcd_driver, subminor);
if (!interface) {
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
err ("USBLCD: %s - error, can't find device for minor %d",
__func__, subminor);
return -ENODEV;
@@ -89,7 +89,7 @@ static int lcd_open(struct inode *inode, struct file *file)
dev = usb_get_intfdata(interface);
if (!dev) {
mutex_unlock(&open_disc_mutex);
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
return -ENODEV;
}
@@ -101,13 +101,13 @@ static int lcd_open(struct inode *inode, struct file *file)
r = usb_autopm_get_interface(interface);
if (r < 0) {
kref_put(&dev->kref, lcd_delete);
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
return r;
}
/* save our object in the file's private structure */
file->private_data = dev;
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
return 0;
}
@@ -164,14 +164,14 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
switch (cmd) {
case IOCTL_GET_HARD_VERSION:
- lock_kernel();
+ mutex_lock(&lcd_mutex);
bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice);
sprintf(buf,"%1d%1d.%1d%1d",
(bcdDevice & 0xF000)>>12,
(bcdDevice & 0xF00)>>8,
(bcdDevice & 0xF0)>>4,
(bcdDevice & 0xF));
- unlock_kernel();
+ mutex_unlock(&lcd_mutex);
if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0)
return -EFAULT;
break;
--
GitLab
From e53e841d451a2d0da094b8fea4a7f22b296234f6 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 12 Jul 2010 13:50:13 -0700
Subject: [PATCH 781/863] USB: usb-skeleton: Remove unnecessary casts of
private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/usb-skeleton.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index d110588b56f1a..552679b8dbd19 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -142,7 +142,7 @@ static int skel_release(struct inode *inode, struct file *file)
{
struct usb_skel *dev;
- dev = (struct usb_skel *)file->private_data;
+ dev = file->private_data;
if (dev == NULL)
return -ENODEV;
@@ -162,7 +162,7 @@ static int skel_flush(struct file *file, fl_owner_t id)
struct usb_skel *dev;
int res;
- dev = (struct usb_skel *)file->private_data;
+ dev = file->private_data;
if (dev == NULL)
return -ENODEV;
@@ -246,7 +246,7 @@ static ssize_t skel_read(struct file *file, char *buffer, size_t count,
int rv;
bool ongoing_io;
- dev = (struct usb_skel *)file->private_data;
+ dev = file->private_data;
/* if we cannot read at all, return EOF */
if (!dev->bulk_in_urb || !count)
@@ -401,7 +401,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer,
char *buf = NULL;
size_t writesize = min(count, (size_t)MAX_TRANSFER);
- dev = (struct usb_skel *)file->private_data;
+ dev = file->private_data;
/* verify that we actually have some data to write */
if (count == 0)
--
GitLab
From 5bd6e8b3fb787b7337b681aaa601e5c7bdc67c55 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 12 Jul 2010 13:50:12 -0700
Subject: [PATCH 782/863] USB: misc: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/misc/ftdi-elan.c | 4 ++--
drivers/usb/misc/iowarrior.c | 8 ++++----
drivers/usb/misc/legousbtower.c | 6 +++---
drivers/usb/misc/sisusbvga/sisusb.c | 10 +++++-----
drivers/usb/misc/usblcd.c | 8 ++++----
5 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 82e16630a78be..aecf380f6ecc5 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -650,7 +650,7 @@ static int ftdi_elan_open(struct inode *inode, struct file *file)
static int ftdi_elan_release(struct inode *inode, struct file *file)
{
- struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+ struct usb_ftdi *ftdi = file->private_data;
if (ftdi == NULL)
return -ENODEV;
up(&ftdi->sw_lock); /* decrement the count on our device */
@@ -673,7 +673,7 @@ static ssize_t ftdi_elan_read(struct file *file, char __user *buffer,
int bytes_read = 0;
int retry_on_empty = 10;
int retry_on_timeout = 5;
- struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+ struct usb_ftdi *ftdi = file->private_data;
if (ftdi->disconnected > 0) {
return -ENODEV;
}
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 82966458a0040..2de49c8887c5f 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -283,7 +283,7 @@ static ssize_t iowarrior_read(struct file *file, char __user *buffer,
int read_idx;
int offset;
- dev = (struct iowarrior *)file->private_data;
+ dev = file->private_data;
/* verify that the device wasn't unplugged */
if (dev == NULL || !dev->present)
@@ -349,7 +349,7 @@ static ssize_t iowarrior_write(struct file *file,
char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */
struct urb *int_out_urb = NULL;
- dev = (struct iowarrior *)file->private_data;
+ dev = file->private_data;
mutex_lock(&dev->mutex);
/* verify that the device wasn't unplugged */
@@ -484,7 +484,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
int retval;
int io_res; /* checks for bytes read/written and copy_to/from_user results */
- dev = (struct iowarrior *)file->private_data;
+ dev = file->private_data;
if (dev == NULL) {
return -ENODEV;
}
@@ -657,7 +657,7 @@ static int iowarrior_release(struct inode *inode, struct file *file)
struct iowarrior *dev;
int retval = 0;
- dev = (struct iowarrior *)file->private_data;
+ dev = file->private_data;
if (dev == NULL) {
return -ENODEV;
}
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 8547bf9e31752..6482c6e2e6bd2 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -448,7 +448,7 @@ static int tower_release (struct inode *inode, struct file *file)
dbg(2, "%s: enter", __func__);
- dev = (struct lego_usb_tower *)file->private_data;
+ dev = file->private_data;
if (dev == NULL) {
dbg(1, "%s: object is NULL", __func__);
@@ -597,7 +597,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
dbg(2, "%s: enter, count = %Zd", __func__, count);
- dev = (struct lego_usb_tower *)file->private_data;
+ dev = file->private_data;
/* lock this object */
if (mutex_lock_interruptible(&dev->lock)) {
@@ -686,7 +686,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t
dbg(2, "%s: enter, count = %Zd", __func__, count);
- dev = (struct lego_usb_tower *)file->private_data;
+ dev = file->private_data;
/* lock this object */
if (mutex_lock_interruptible(&dev->lock)) {
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index d25814c172b27..70d00e99a4b40 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2487,7 +2487,7 @@ sisusb_release(struct inode *inode, struct file *file)
{
struct sisusb_usb_data *sisusb;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
@@ -2519,7 +2519,7 @@ sisusb_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
u16 buf16;
u32 buf32, address;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
@@ -2661,7 +2661,7 @@ sisusb_write(struct file *file, const char __user *buffer, size_t count,
u16 buf16;
u32 buf32, address;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
@@ -2804,7 +2804,7 @@ sisusb_lseek(struct file *file, loff_t offset, int orig)
struct sisusb_usb_data *sisusb;
loff_t ret;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
@@ -2969,7 +2969,7 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
long retval = 0;
u32 __user *argp = (u32 __user *)arg;
- if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
+ if (!(sisusb = file->private_data))
return -ENODEV;
mutex_lock(&sisusb->lock);
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 6ae39e3e5046c..d00dde19194ca 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -116,7 +116,7 @@ static int lcd_release(struct inode *inode, struct file *file)
{
struct usb_lcd *dev;
- dev = (struct usb_lcd *)file->private_data;
+ dev = file->private_data;
if (dev == NULL)
return -ENODEV;
@@ -132,7 +132,7 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, l
int retval = 0;
int bytes_read;
- dev = (struct usb_lcd *)file->private_data;
+ dev = file->private_data;
/* do a blocking bulk read to get data from the device */
retval = usb_bulk_msg(dev->udev,
@@ -158,7 +158,7 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
u16 bcdDevice;
char buf[30];
- dev = (struct usb_lcd *)file->private_data;
+ dev = file->private_data;
if (dev == NULL)
return -ENODEV;
@@ -217,7 +217,7 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz
struct urb *urb = NULL;
char *buf = NULL;
- dev = (struct usb_lcd *)file->private_data;
+ dev = file->private_data;
/* verify that we actually have some data to write */
if (count == 0)
--
GitLab
From fd63b10ba33f272308d9f976a40f2cd064d8b21b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 12 Jul 2010 13:50:11 -0700
Subject: [PATCH 783/863] USB: gadget: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/f_hid.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 1e00ff9866af8..53e120208e990 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -142,7 +142,7 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = {
static ssize_t f_hidg_read(struct file *file, char __user *buffer,
size_t count, loff_t *ptr)
{
- struct f_hidg *hidg = (struct f_hidg *)file->private_data;
+ struct f_hidg *hidg = file->private_data;
char *tmp_buff = NULL;
unsigned long flags;
@@ -200,7 +200,7 @@ static void f_hidg_req_complete(struct usb_ep *ep, struct usb_request *req)
static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
size_t count, loff_t *offp)
{
- struct f_hidg *hidg = (struct f_hidg *)file->private_data;
+ struct f_hidg *hidg = file->private_data;
ssize_t status = -ENOMEM;
if (!access_ok(VERIFY_READ, buffer, count))
@@ -257,7 +257,7 @@ static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
static unsigned int f_hidg_poll(struct file *file, poll_table *wait)
{
- struct f_hidg *hidg = (struct f_hidg *)file->private_data;
+ struct f_hidg *hidg = file->private_data;
unsigned int ret = 0;
poll_wait(file, &hidg->read_queue, wait);
--
GitLab
From f6c826a90055dd05905982f7a3f60e0bcaa0434e Mon Sep 17 00:00:00 2001
From: stephane duverger <stephane.duverger@gmail.com>
Date: Mon, 12 Jul 2010 18:37:53 +0200
Subject: [PATCH 784/863] USB: EHCI Debug Port Device Gadget
This is a patch that implements an USB EHCI Debug Device using the
Gadget API. This patch applies to a 2.6.35-rc3 kernel.
The gadget needs a compliant usb controller that forwards the
USB_DEVICE_DEBUG_MODE feature to its gadget.
The gadget provides two configuration modes, one that only printk() the
received data, and one that exposes a serial device to userland
(/dev/ttyGSxxx).
The gadget has been tested on an IGEPv2 board running a 2.6.35-rc1
kernel. The debug port was fed on the host side by a 2.6.34 kernel.
Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/Kconfig | 28 +++
drivers/usb/gadget/Makefile | 2 +
drivers/usb/gadget/dbgp.c | 434 ++++++++++++++++++++++++++++++++++++
3 files changed, 464 insertions(+)
create mode 100644 drivers/usb/gadget/dbgp.c
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index dd3b251018587..cd27f9bde2c8b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -915,6 +915,34 @@ config USB_G_HID
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "g_hid".
+config USB_G_DBGP
+ tristate "EHCI Debug Device Gadget"
+ help
+ This gadget emulates an EHCI Debug device. This is useful when you want
+ to interact with an EHCI Debug Port.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_dbgp".
+
+if USB_G_DBGP
+choice
+ prompt "EHCI Debug Device mode"
+ default USB_G_DBGP_SERIAL
+
+config USB_G_DBGP_PRINTK
+ depends on USB_G_DBGP
+ bool "printk"
+ help
+ Directly printk() received data. No interaction.
+
+config USB_G_DBGP_SERIAL
+ depends on USB_G_DBGP
+ bool "serial"
+ help
+ Userland can interact using /dev/ttyGSxxx.
+endchoice
+endif
+
# put drivers that need isochronous transfer support (for audio
# or video class gadget drivers), or specific hardware, here.
config USB_G_WEBCAM
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 9bcde110feb1a..397b892e90e2b 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -44,6 +44,7 @@ g_printer-objs := printer.o
g_cdc-objs := cdc2.o
g_multi-objs := multi.o
g_hid-objs := hid.o
+g_dbgp-objs := dbgp.o
g_nokia-objs := nokia.o
g_webcam-objs := webcam.o
@@ -60,6 +61,7 @@ obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
obj-$(CONFIG_USB_G_HID) += g_hid.o
+obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o
obj-$(CONFIG_USB_G_MULTI) += g_multi.o
obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o
obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
new file mode 100644
index 0000000000000..0ed50a2c0a361
--- /dev/null
+++ b/drivers/usb/gadget/dbgp.c
@@ -0,0 +1,434 @@
+/*
+ * dbgp.c -- EHCI Debug Port device gadget
+ *
+ * Copyright (C) 2010 Stephane Duverger
+ *
+ * Released under the GPLv2.
+ *
+ */
+
+/* verbose messages */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* See comments in "zero.c" */
+#include "epautoconf.c"
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+#include "u_serial.c"
+#endif
+
+#define DRIVER_VENDOR_ID 0x0525 /* NetChip */
+#define DRIVER_PRODUCT_ID 0xc0de /* undefined */
+
+#define USB_DEBUG_MAX_PACKET_SIZE 8
+#define DBGP_REQ_EP0_LEN 128
+#define DBGP_REQ_LEN 512
+
+static struct dbgp {
+ struct usb_gadget *gadget;
+ struct usb_request *req;
+ struct usb_ep *i_ep;
+ struct usb_ep *o_ep;
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ struct gserial *serial;
+#endif
+} dbgp;
+
+static struct usb_device_descriptor device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
+ .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID),
+ .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID),
+ .bNumConfigurations = 1,
+};
+
+static struct usb_debug_descriptor dbg_desc = {
+ .bLength = sizeof dbg_desc,
+ .bDescriptorType = USB_DT_DEBUG,
+};
+
+static struct usb_endpoint_descriptor i_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .bEndpointAddress = USB_DIR_IN,
+};
+
+static struct usb_endpoint_descriptor o_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .bEndpointAddress = USB_DIR_OUT,
+};
+
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+static int dbgp_consume(char *buf, unsigned len)
+{
+ char c;
+
+ if (!len)
+ return 0;
+
+ c = buf[len-1];
+ if (c != 0)
+ buf[len-1] = 0;
+
+ printk(KERN_NOTICE "%s%c", buf, c);
+ return 0;
+}
+
+static void __disable_ep(struct usb_ep *ep)
+{
+ if (ep && ep->driver_data == dbgp.gadget) {
+ usb_ep_disable(ep);
+ ep->driver_data = NULL;
+ }
+}
+
+static void dbgp_disable_ep(void)
+{
+ __disable_ep(dbgp.i_ep);
+ __disable_ep(dbgp.o_ep);
+}
+
+static void dbgp_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ int stp;
+ int err = 0;
+ int status = req->status;
+
+ if (ep == dbgp.i_ep) {
+ stp = 1;
+ goto fail;
+ }
+
+ if (status != 0) {
+ stp = 2;
+ goto release_req;
+ }
+
+ dbgp_consume(req->buf, req->actual);
+
+ req->length = DBGP_REQ_LEN;
+ err = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (err < 0) {
+ stp = 3;
+ goto release_req;
+ }
+
+ return;
+
+release_req:
+ kfree(req->buf);
+ usb_ep_free_request(dbgp.o_ep, req);
+ dbgp_disable_ep();
+fail:
+ dev_dbg(&dbgp.gadget->dev,
+ "complete: failure (%d:%d) ==> %d\n", stp, err, status);
+}
+
+static int dbgp_enable_ep_req(struct usb_ep *ep)
+{
+ int err, stp;
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request(ep, GFP_KERNEL);
+ if (!req) {
+ err = -ENOMEM;
+ stp = 1;
+ goto fail_1;
+ }
+
+ req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL);
+ if (!req->buf) {
+ err = -ENOMEM;
+ stp = 2;
+ goto fail_2;
+ }
+
+ req->complete = dbgp_complete;
+ req->length = DBGP_REQ_LEN;
+ err = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (err < 0) {
+ stp = 3;
+ goto fail_3;
+ }
+
+ return 0;
+
+fail_3:
+ kfree(req->buf);
+fail_2:
+ usb_ep_free_request(dbgp.o_ep, req);
+fail_1:
+ dev_dbg(&dbgp.gadget->dev,
+ "enable ep req: failure (%d:%d)\n", stp, err);
+ return err;
+}
+
+static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc)
+{
+ int err = usb_ep_enable(ep, desc);
+ ep->driver_data = dbgp.gadget;
+ return err;
+}
+
+static int dbgp_enable_ep(void)
+{
+ int err, stp;
+
+ err = __enable_ep(dbgp.i_ep, &i_desc);
+ if (err < 0) {
+ stp = 1;
+ goto fail_1;
+ }
+
+ err = __enable_ep(dbgp.o_ep, &o_desc);
+ if (err < 0) {
+ stp = 2;
+ goto fail_2;
+ }
+
+ err = dbgp_enable_ep_req(dbgp.o_ep);
+ if (err < 0) {
+ stp = 3;
+ goto fail_3;
+ }
+
+ return 0;
+
+fail_3:
+ __disable_ep(dbgp.o_ep);
+fail_2:
+ __disable_ep(dbgp.i_ep);
+fail_1:
+ dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err);
+ return err;
+}
+#endif
+
+static void dbgp_disconnect(struct usb_gadget *gadget)
+{
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+ dbgp_disable_ep();
+#else
+ gserial_disconnect(dbgp.serial);
+#endif
+}
+
+static void dbgp_unbind(struct usb_gadget *gadget)
+{
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ kfree(dbgp.serial);
+#endif
+ if (dbgp.req) {
+ kfree(dbgp.req->buf);
+ usb_ep_free_request(gadget->ep0, dbgp.req);
+ }
+
+ gadget->ep0->driver_data = NULL;
+}
+
+static int __init dbgp_configure_endpoints(struct usb_gadget *gadget)
+{
+ int stp;
+
+ usb_ep_autoconfig_reset(gadget);
+
+ dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc);
+ if (!dbgp.i_ep) {
+ stp = 1;
+ goto fail_1;
+ }
+
+ dbgp.i_ep->driver_data = gadget;
+ i_desc.wMaxPacketSize =
+ __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
+
+ dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc);
+ if (!dbgp.o_ep) {
+ dbgp.i_ep->driver_data = NULL;
+ stp = 2;
+ goto fail_2;
+ }
+
+ dbgp.o_ep->driver_data = gadget;
+ o_desc.wMaxPacketSize =
+ __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
+
+ dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress & 0x7f;
+ dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress & 0x7f;
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ dbgp.serial->in = dbgp.i_ep;
+ dbgp.serial->out = dbgp.o_ep;
+
+ dbgp.serial->in_desc = &i_desc;
+ dbgp.serial->out_desc = &o_desc;
+
+ if (gserial_setup(gadget, 1) < 0) {
+ stp = 3;
+ goto fail_3;
+ }
+
+ return 0;
+
+fail_3:
+ dbgp.o_ep->driver_data = NULL;
+#else
+ return 0;
+#endif
+fail_2:
+ dbgp.i_ep->driver_data = NULL;
+fail_1:
+ dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp);
+ return -ENODEV;
+}
+
+static int __init dbgp_bind(struct usb_gadget *gadget)
+{
+ int err, stp;
+
+ dbgp.gadget = gadget;
+
+ dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+ if (!dbgp.req) {
+ err = -ENOMEM;
+ stp = 1;
+ goto fail;
+ }
+
+ dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL);
+ if (!dbgp.req->buf) {
+ err = -ENOMEM;
+ stp = 2;
+ goto fail;
+ }
+
+ dbgp.req->length = DBGP_REQ_EP0_LEN;
+ gadget->ep0->driver_data = gadget;
+
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL);
+ if (!dbgp.serial) {
+ stp = 3;
+ err = -ENOMEM;
+ goto fail;
+ }
+#endif
+ err = dbgp_configure_endpoints(gadget);
+ if (err < 0) {
+ stp = 4;
+ goto fail;
+ }
+
+ dev_dbg(&dbgp.gadget->dev, "bind: success\n");
+ return 0;
+
+fail:
+ dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err);
+ dbgp_unbind(gadget);
+ return err;
+}
+
+static void dbgp_setup_complete(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n",
+ req->status, req->actual, req->length);
+}
+
+static int dbgp_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_request *req = dbgp.req;
+ u8 request = ctrl->bRequest;
+ u16 value = le16_to_cpu(ctrl->wValue);
+ u16 length = le16_to_cpu(ctrl->wLength);
+ int err = 0;
+ void *data;
+ u16 len;
+
+ gadget->ep0->driver_data = gadget;
+
+ if (request == USB_REQ_GET_DESCRIPTOR) {
+ switch (value>>8) {
+ case USB_DT_DEVICE:
+ dev_dbg(&dbgp.gadget->dev, "setup: desc device\n");
+ len = sizeof device_desc;
+ data = &device_desc;
+ break;
+ case USB_DT_DEBUG:
+ dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n");
+ len = sizeof dbg_desc;
+ data = &dbg_desc;
+ break;
+ default:
+ goto fail;
+ }
+ } else if (request == USB_REQ_SET_FEATURE &&
+ value == USB_DEVICE_DEBUG_MODE) {
+ len = 0;
+ data = NULL;
+ dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n");
+#ifdef CONFIG_USB_G_DBGP_PRINTK
+ err = dbgp_enable_ep();
+#else
+ err = gserial_connect(dbgp.serial, 0);
+#endif
+ if (err < 0)
+ goto fail;
+ } else
+ goto fail;
+
+ if (len >= 0) {
+ req->length = min(length, len);
+ req->zero = len < req->length;
+ if (data && req->length)
+ memcpy(req->buf, data, req->length);
+
+ req->complete = dbgp_setup_complete;
+ return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+ }
+
+fail:
+ dev_dbg(&dbgp.gadget->dev,
+ "setup: failure req %x v %x\n", request, value);
+ return err;
+}
+
+static struct usb_gadget_driver dbgp_driver = {
+ .function = "dbgp",
+ .speed = USB_SPEED_HIGH,
+ .bind = dbgp_bind,
+ .unbind = dbgp_unbind,
+ .setup = dbgp_setup,
+ .disconnect = dbgp_disconnect,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "dbgp"
+ },
+};
+
+static int __init dbgp_init(void)
+{
+ return usb_gadget_register_driver(&dbgp_driver);
+}
+
+static void __exit dbgp_exit(void)
+{
+ usb_gadget_unregister_driver(&dbgp_driver);
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+ gserial_cleanup();
+#endif
+}
+
+MODULE_AUTHOR("Stephane Duverger");
+MODULE_LICENSE("GPL");
+module_init(dbgp_init);
+module_exit(dbgp_exit);
--
GitLab
From d0390d92bf548a903a48e1a2b3a12eff8a9d838b Mon Sep 17 00:00:00 2001
From: stephane duverger <stephane.duverger@gmail.com>
Date: Mon, 12 Jul 2010 18:43:47 +0200
Subject: [PATCH 785/863] USB: musb: forward debug mode feature to gadget
This is a patch for the musb usb controller.
It allows forwarding of the debug mode feature to its gadget in order
to be able to act as an ehci debug device.
This patch has been tested on an IGEPv2 board running a 2.6.35-rc1
kernel.
Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/musb/musb_gadget_ep0.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 21b9788d02439..59bef8f3a3585 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -402,6 +402,9 @@ __acquires(musb->lock)
musb->g.a_alt_hnp_support = 1;
break;
#endif
+ case USB_DEVICE_DEBUG_MODE:
+ handled = 0;
+ break;
stall:
default:
handled = -EINVAL;
--
GitLab
From a7a6b79bc5bd5dda9fdd1adb4a342a4c5ee789a8 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Tue, 13 Jul 2010 23:56:24 +0800
Subject: [PATCH 786/863] USB: serial: enable async suspend for usb serial port
device
Usb serial port device is child of its usb interface device, so
we can enable async suspend of usb serial port device to speedup
system suspend.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/usb-serial.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 443468e9d66e0..2a982e62963b5 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1071,6 +1071,8 @@ int usb_serial_probe(struct usb_interface *interface,
dev_set_name(&port->dev, "ttyUSB%d", port->number);
dbg ("%s - registering %s", __func__, dev_name(&port->dev));
port->dev_state = PORT_REGISTERING;
+ device_enable_async_suspend(&port->dev);
+
retval = device_add(&port->dev);
if (retval) {
dev_err(&port->dev, "Error registering port device, "
--
GitLab
From 10d0ca024257c88b28235fcd58577c3eb01b0460 Mon Sep 17 00:00:00 2001
From: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Date: Tue, 20 Jul 2010 09:08:01 +0200
Subject: [PATCH 787/863] USB: host: Remove dead CONFIG_ARCH_KARO
CONFIG_ARCH_KARO doesn't exist in Kconfig and is never defined anywhere
else, therefore removing all references for it from the source code.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/isp1362.h | 24 +-----------------------
1 file changed, 1 insertion(+), 23 deletions(-)
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index d995351f9bed8..0f97820e65bef 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -8,29 +8,7 @@
/*
* Platform specific compile time options
*/
-#if defined(CONFIG_ARCH_KARO)
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/karo.h>
-
-#define USE_32BIT 1
-
-
-/* These options are mutually eclusive */
-#define USE_PLATFORM_DELAY 1
-#define USE_NDELAY 0
-/*
- * MAX_ROOT_PORTS: Number of downstream ports
- *
- * The chip has two USB ports, one of which can be configured as
- * an USB device port, so the value of this constant is implementation
- * specific.
- */
-#define MAX_ROOT_PORTS 2
-#define DUMMY_DELAY_ACCESS do {} while (0)
-
-/* insert platform specific definitions for other machines here */
-#elif defined(CONFIG_BLACKFIN)
+#if defined(CONFIG_BLACKFIN)
#include <linux/io.h>
#define USE_32BIT 0
--
GitLab
From 9800eb330df0c1a8ef6f4123705eea691000e374 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 20 Jul 2010 15:29:08 -0700
Subject: [PATCH 788/863] USB: io_ti.c: don't return 0 if writing the download
record failed
If the write download record failed we shouldn't return 0.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/io_ti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 03696b91bd6d0..dc47f986df57f 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1298,7 +1298,7 @@ static int download_fw(struct edgeport_serial *serial)
kfree(header);
kfree(rom_desc);
kfree(ti_manuf_desc);
- return status;
+ return -EINVAL;
}
/* verify the write -- must do this in order for
--
GitLab
From fa345d0109ac8c8e388196b1db29d1a570239d3b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 15 Jul 2010 09:20:19 +0200
Subject: [PATCH 789/863] USB: otg/ulpi.c : fix register write
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
ulpi_set_vbus and ulpi_set_flags are using ULPI_SET(register) to write
to the PHY's registers, which means we can only set bits in the PHY's
register and not clear them.
By directly using the address of the register without any offset, we
now get the expected behaviour for these functions.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/otg/ulpi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index d331b222ad214..10a1df628f8c3 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -54,7 +54,7 @@ static int ulpi_set_flags(struct otg_transceiver *otg)
if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR)
flags |= ULPI_OTG_CTRL_EXTVBUSIND;
- return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
+ return otg_io_write(otg, flags, ULPI_OTG_CTRL);
}
static int ulpi_init(struct otg_transceiver *otg)
@@ -95,7 +95,7 @@ static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
}
- return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
+ return otg_io_write(otg, flags, ULPI_OTG_CTRL);
}
struct otg_transceiver *
--
GitLab
From 6a5a9a4b1791b49047267cba59a69a8861c9bb7c Mon Sep 17 00:00:00 2001
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Thu, 15 Jul 2010 16:00:14 +0300
Subject: [PATCH 790/863] USB: otg/ulpi: remove unused macro
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/otg/ulpi.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index 10a1df628f8c3..448d643e72723 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -31,8 +31,6 @@
#define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
-#define TR_FLAG(flags, a, b) (((flags) & a) ? b : 0)
-
/* ULPI hardcoded IDs, used for probing */
static unsigned int ulpi_ids[] = {
ULPI_ID(0x04cc, 0x1504), /* NXP ISP1504 */
--
GitLab
From 51a91a5424cb94f40eb0c9d0b71d8df4e423742a Mon Sep 17 00:00:00 2001
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Thu, 15 Jul 2010 16:00:15 +0300
Subject: [PATCH 791/863] USB: otg/ulpi: add support for SMSC USB3319 ulpi phy
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/otg/Kconfig | 2 --
drivers/usb/otg/ulpi.c | 1 +
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 3d2d3e549bd18..3b1289572d72e 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -49,8 +49,6 @@ config USB_ULPI
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
- The only chip currently supported is NXP's ISP1504
-
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index 448d643e72723..ef7dbe40f1114 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -34,6 +34,7 @@
/* ULPI hardcoded IDs, used for probing */
static unsigned int ulpi_ids[] = {
ULPI_ID(0x04cc, 0x1504), /* NXP ISP1504 */
+ ULPI_ID(0x0424, 0x0006), /* SMSC USB3319 */
};
static int ulpi_set_flags(struct otg_transceiver *otg)
--
GitLab
From 13dd0c9767349b280cf131c34461f85e5effc42a Mon Sep 17 00:00:00 2001
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Thu, 15 Jul 2010 16:00:16 +0300
Subject: [PATCH 792/863] USB: otg/ulpi: extend the generic ulpi driver.
1) Introduce ulpi specific flags for control of the ulpi phy
2) Extend the generic ulpi driver with support for Function and
Interface control of upli phy
3) Update the platforms using the generic ulpi driver with new ulpi
flags
4) Remove the otg control flags not in use
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
arch/arm/mach-mx3/mach-armadillo5x0.c | 4 +-
arch/arm/mach-mx3/mach-mx31lilly.c | 4 +-
arch/arm/mach-mx3/mach-mx31lite.c | 2 +-
arch/arm/mach-mx3/mach-mx31moboard.c | 2 +-
arch/arm/mach-mx3/mach-pcm037.c | 4 +-
arch/arm/mach-mx3/mach-pcm043.c | 2 +-
arch/arm/mach-mx3/mx31moboard-smartbot.c | 2 +-
drivers/usb/otg/ulpi.c | 127 +++++++++++++++++++++--
include/linux/usb/otg.h | 7 --
include/linux/usb/ulpi.h | 39 +++++++
10 files changed, 166 insertions(+), 27 deletions(-)
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 96aadcadb4ff0..68879c996a55d 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -551,9 +551,9 @@ static void __init armadillo5x0_init(void)
/* USB */
#if defined(CONFIG_USB_ULPI)
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &usbotg_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 8f66f65e80e20..7c37daabb7573 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -245,9 +245,9 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
static void lilly1131_usb_init(void)
{
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh1, &usbh1_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index da236c497d2ae..f66a9576d8c24 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -256,7 +256,7 @@ static void __init mxc_board_init(void)
#if defined(CONFIG_USB_ULPI)
/* USB */
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 67776bc61c336..7a075e8bf2d47 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -412,7 +412,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
static int __init moboard_usbh2_init(void)
{
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
}
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 8a292dd1a7146..214de11b20b91 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -654,13 +654,13 @@ static void __init mxc_board_init(void)
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 47f5311b301a1..28886f0e62f97 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -378,7 +378,7 @@ static void __init mxc_board_init(void)
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 40c3e7564cb61..417757e78c65b 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -134,7 +134,7 @@ static struct mxc_usbh_platform_data otg_host_pdata = {
static int __init smartbot_otg_host_init(void)
{
otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
}
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index ef7dbe40f1114..ccc81950822b2 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -37,25 +37,106 @@ static unsigned int ulpi_ids[] = {
ULPI_ID(0x0424, 0x0006), /* SMSC USB3319 */
};
-static int ulpi_set_flags(struct otg_transceiver *otg)
+static int ulpi_set_otg_flags(struct otg_transceiver *otg)
{
- unsigned int flags = 0;
+ unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN |
+ ULPI_OTG_CTRL_DM_PULLDOWN;
- if (otg->flags & USB_OTG_PULLUP_ID)
+ if (otg->flags & ULPI_OTG_ID_PULLUP)
flags |= ULPI_OTG_CTRL_ID_PULLUP;
- if (otg->flags & USB_OTG_PULLDOWN_DM)
- flags |= ULPI_OTG_CTRL_DM_PULLDOWN;
+ /*
+ * ULPI Specification rev.1.1 default
+ * for Dp/DmPulldown is enabled.
+ */
+ if (otg->flags & ULPI_OTG_DP_PULLDOWN_DIS)
+ flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN;
- if (otg->flags & USB_OTG_PULLDOWN_DP)
- flags |= ULPI_OTG_CTRL_DP_PULLDOWN;
+ if (otg->flags & ULPI_OTG_DM_PULLDOWN_DIS)
+ flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN;
- if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR)
+ if (otg->flags & ULPI_OTG_EXTVBUSIND)
flags |= ULPI_OTG_CTRL_EXTVBUSIND;
return otg_io_write(otg, flags, ULPI_OTG_CTRL);
}
+static int ulpi_set_fc_flags(struct otg_transceiver *otg)
+{
+ unsigned int flags = 0;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for XcvrSelect is Full Speed.
+ */
+ if (otg->flags & ULPI_FC_HS)
+ flags |= ULPI_FUNC_CTRL_HIGH_SPEED;
+ else if (otg->flags & ULPI_FC_LS)
+ flags |= ULPI_FUNC_CTRL_LOW_SPEED;
+ else if (otg->flags & ULPI_FC_FS4LS)
+ flags |= ULPI_FUNC_CTRL_FS4LS;
+ else
+ flags |= ULPI_FUNC_CTRL_FULL_SPEED;
+
+ if (otg->flags & ULPI_FC_TERMSEL)
+ flags |= ULPI_FUNC_CTRL_TERMSELECT;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for OpMode is Normal Operation.
+ */
+ if (otg->flags & ULPI_FC_OP_NODRV)
+ flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ else if (otg->flags & ULPI_FC_OP_DIS_NRZI)
+ flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI;
+ else if (otg->flags & ULPI_FC_OP_NSYNC_NEOP)
+ flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP;
+ else
+ flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for SuspendM is Powered.
+ */
+ flags |= ULPI_FUNC_CTRL_SUSPENDM;
+
+ return otg_io_write(otg, flags, ULPI_FUNC_CTRL);
+}
+
+static int ulpi_set_ic_flags(struct otg_transceiver *otg)
+{
+ unsigned int flags = 0;
+
+ if (otg->flags & ULPI_IC_AUTORESUME)
+ flags |= ULPI_IFC_CTRL_AUTORESUME;
+
+ if (otg->flags & ULPI_IC_EXTVBUS_INDINV)
+ flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS;
+
+ if (otg->flags & ULPI_IC_IND_PASSTHRU)
+ flags |= ULPI_IFC_CTRL_PASSTHRU;
+
+ if (otg->flags & ULPI_IC_PROTECT_DIS)
+ flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE;
+
+ return otg_io_write(otg, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_flags(struct otg_transceiver *otg)
+{
+ int ret;
+
+ ret = ulpi_set_otg_flags(otg);
+ if (ret)
+ return ret;
+
+ ret = ulpi_set_ic_flags(otg);
+ if (ret)
+ return ret;
+
+ return ulpi_set_fc_flags(otg);
+}
+
static int ulpi_init(struct otg_transceiver *otg)
{
int i, vid, pid, ret;
@@ -80,6 +161,31 @@ static int ulpi_init(struct otg_transceiver *otg)
return -ENODEV;
}
+static int ulpi_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+ unsigned int flags = otg_io_read(otg, ULPI_IFC_CTRL);
+
+ if (!host) {
+ otg->host = NULL;
+ return 0;
+ }
+
+ otg->host = host;
+
+ flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE |
+ ULPI_IFC_CTRL_3_PIN_SERIAL_MODE |
+ ULPI_IFC_CTRL_CARKITMODE);
+
+ if (otg->flags & ULPI_IC_6PIN_SERIAL)
+ flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE;
+ else if (otg->flags & ULPI_IC_3PIN_SERIAL)
+ flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE;
+ else if (otg->flags & ULPI_IC_CARKIT)
+ flags |= ULPI_IFC_CTRL_CARKITMODE;
+
+ return otg_io_write(otg, flags, ULPI_IFC_CTRL);
+}
+
static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
{
unsigned int flags = otg_io_read(otg, ULPI_OTG_CTRL);
@@ -87,10 +193,10 @@ static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
if (on) {
- if (otg->flags & USB_OTG_DRV_VBUS)
+ if (otg->flags & ULPI_OTG_DRVVBUS)
flags |= ULPI_OTG_CTRL_DRVVBUS;
- if (otg->flags & USB_OTG_DRV_VBUS_EXT)
+ if (otg->flags & ULPI_OTG_DRVVBUS_EXT)
flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
}
@@ -111,6 +217,7 @@ otg_ulpi_create(struct otg_io_access_ops *ops,
otg->flags = flags;
otg->io_ops = ops;
otg->init = ulpi_init;
+ otg->set_host = ulpi_set_host;
otg->set_vbus = ulpi_set_vbus;
return otg;
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 54b2c5e48b9d7..545cba73ccaff 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -43,13 +43,6 @@ enum usb_xceiv_events {
USB_EVENT_ENUMERATED, /* gadget driver enumerated */
};
-#define USB_OTG_PULLUP_ID (1 << 0)
-#define USB_OTG_PULLDOWN_DP (1 << 1)
-#define USB_OTG_PULLDOWN_DM (1 << 2)
-#define USB_OTG_EXT_VBUS_INDICATOR (1 << 3)
-#define USB_OTG_DRV_VBUS (1 << 4)
-#define USB_OTG_DRV_VBUS_EXT (1 << 5)
-
struct otg_transceiver;
/* for transceivers connected thru an ULPI interface, the user must
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 900d97b7096a2..82b1507f47351 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -14,6 +14,41 @@
#include <linux/usb/otg.h>
/*-------------------------------------------------------------------------*/
+/*
+ * ULPI Flags
+ */
+#define ULPI_OTG_ID_PULLUP (1 << 0)
+#define ULPI_OTG_DP_PULLDOWN_DIS (1 << 1)
+#define ULPI_OTG_DM_PULLDOWN_DIS (1 << 2)
+#define ULPI_OTG_DISCHRGVBUS (1 << 3)
+#define ULPI_OTG_CHRGVBUS (1 << 4)
+#define ULPI_OTG_DRVVBUS (1 << 5)
+#define ULPI_OTG_DRVVBUS_EXT (1 << 6)
+#define ULPI_OTG_EXTVBUSIND (1 << 7)
+
+#define ULPI_IC_6PIN_SERIAL (1 << 8)
+#define ULPI_IC_3PIN_SERIAL (1 << 9)
+#define ULPI_IC_CARKIT (1 << 10)
+#define ULPI_IC_CLKSUSPM (1 << 11)
+#define ULPI_IC_AUTORESUME (1 << 12)
+#define ULPI_IC_EXTVBUS_INDINV (1 << 13)
+#define ULPI_IC_IND_PASSTHRU (1 << 14)
+#define ULPI_IC_PROTECT_DIS (1 << 15)
+
+#define ULPI_FC_HS (1 << 16)
+#define ULPI_FC_FS (1 << 17)
+#define ULPI_FC_LS (1 << 18)
+#define ULPI_FC_FS4LS (1 << 19)
+#define ULPI_FC_TERMSEL (1 << 20)
+#define ULPI_FC_OP_NORM (1 << 21)
+#define ULPI_FC_OP_NODRV (1 << 22)
+#define ULPI_FC_OP_DIS_NRZI (1 << 23)
+#define ULPI_FC_OP_NSYNC_NEOP (1 << 24)
+#define ULPI_FC_RST (1 << 25)
+#define ULPI_FC_SUSPM (1 << 26)
+
+/*-------------------------------------------------------------------------*/
+
/*
* Macros for Set and Clear
* See ULPI 1.1 specification to find the registers with Set and Clear offsets
@@ -59,6 +94,10 @@
/*-------------------------------------------------------------------------*/
+/*
+ * Register Bits
+ */
+
/* Function Control */
#define ULPI_FUNC_CTRL_XCVRSEL (1 << 0)
#define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0)
--
GitLab
From 43b86af83da7db8b2c6d85ca970203950e5bad88 Mon Sep 17 00:00:00 2001
From: Dong Nguyen <Dong.Nguyen@amd.com>
Date: Wed, 21 Jul 2010 16:56:08 -0700
Subject: [PATCH 793/863] USB: xHCI: Supporting MSI/MSI-X
Enable MSI/MSI-X supporting in xhci driver.
Provide the mechanism to fall back using MSI and Legacy IRQs
if MSI-X IRQs register failed.
Signed-off-by: Dong Nguyen <Dong.Nguyen@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hcd.c | 1 +
drivers/usb/host/xhci.c | 166 ++++++++++++++++++++++++++++++----------
drivers/usb/host/xhci.h | 2 +-
3 files changed, 128 insertions(+), 41 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index c5753c797735d..5cca00a6d09d6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2085,6 +2085,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
local_irq_restore(flags);
return rc;
}
+EXPORT_SYMBOL_GPL(usb_hcd_irq);
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5e73386b38996..3106d22ae053f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -20,6 +20,7 @@
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/log2.h>
#include <linux/module.h>
@@ -171,22 +172,95 @@ int xhci_reset(struct xhci_hcd *xhci)
return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
}
+static irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
+{
+ irqreturn_t ret;
-#if 0
-/* Set up MSI-X table for entry 0 (may claim other entries later) */
-static int xhci_setup_msix(struct xhci_hcd *xhci)
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ ret = xhci_irq(hcd);
+
+ return ret;
+}
+
+/*
+ * Free IRQs
+ * free all IRQs request
+ */
+static void xhci_free_irq(struct xhci_hcd *xhci)
+{
+ int i;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ /* return if using legacy interrupt */
+ if (xhci_to_hcd(xhci)->irq >= 0)
+ return;
+
+ if (xhci->msix_entries) {
+ for (i = 0; i < xhci->msix_count; i++)
+ if (xhci->msix_entries[i].vector)
+ free_irq(xhci->msix_entries[i].vector,
+ xhci_to_hcd(xhci));
+ } else if (pdev->irq >= 0)
+ free_irq(pdev->irq, xhci_to_hcd(xhci));
+
+ return;
+}
+
+/*
+ * Set up MSI
+ */
+static int xhci_setup_msi(struct xhci_hcd *xhci)
{
int ret;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ ret = pci_enable_msi(pdev);
+ if (ret) {
+ xhci_err(xhci, "failed to allocate MSI entry\n");
+ return ret;
+ }
+
+ ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq,
+ 0, "xhci_hcd", xhci_to_hcd(xhci));
+ if (ret) {
+ xhci_err(xhci, "disable MSI interrupt\n");
+ pci_disable_msi(pdev);
+ }
+
+ return ret;
+}
+
+/*
+ * Set up MSI-X
+ */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+ int i, ret = 0;
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
- xhci->msix_count = 0;
- /* XXX: did I do this right? ixgbe does kcalloc for more than one */
- xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL);
+ /*
+ * calculate number of msi-x vectors supported.
+ * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
+ * with max number of interrupters based on the xhci HCSPARAMS1.
+ * - num_online_cpus: maximum msi-x vectors per CPUs core.
+ * Add additional 1 vector to ensure always available interrupt.
+ */
+ xhci->msix_count = min(num_online_cpus() + 1,
+ HCS_MAX_INTRS(xhci->hcs_params1));
+
+ xhci->msix_entries =
+ kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
+ GFP_KERNEL);
if (!xhci->msix_entries) {
xhci_err(xhci, "Failed to allocate MSI-X entries\n");
return -ENOMEM;
}
- xhci->msix_entries[0].entry = 0;
+
+ for (i = 0; i < xhci->msix_count; i++) {
+ xhci->msix_entries[i].entry = i;
+ xhci->msix_entries[i].vector = 0;
+ }
ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
if (ret) {
@@ -194,20 +268,19 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
goto free_entries;
}
- /*
- * Pass the xhci pointer value as the request_irq "cookie".
- * If more irqs are added, this will need to be unique for each one.
- */
- ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0,
- "xHCI", xhci_to_hcd(xhci));
- if (ret) {
- xhci_err(xhci, "Failed to allocate MSI-X interrupt\n");
- goto disable_msix;
+ for (i = 0; i < xhci->msix_count; i++) {
+ ret = request_irq(xhci->msix_entries[i].vector,
+ (irq_handler_t)xhci_msi_irq,
+ 0, "xhci_hcd", xhci_to_hcd(xhci));
+ if (ret)
+ goto disable_msix;
}
- xhci_dbg(xhci, "Finished setting up MSI-X\n");
- return 0;
+
+ return ret;
disable_msix:
+ xhci_err(xhci, "disable MSI-X interrupt\n");
+ xhci_free_irq(xhci);
pci_disable_msix(pdev);
free_entries:
kfree(xhci->msix_entries);
@@ -215,21 +288,23 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
return ret;
}
-/* XXX: code duplication; can xhci_setup_msix call this? */
/* Free any IRQs and disable MSI-X */
static void xhci_cleanup_msix(struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
- if (!xhci->msix_entries)
- return;
- free_irq(xhci->msix_entries[0].vector, xhci);
- pci_disable_msix(pdev);
- kfree(xhci->msix_entries);
- xhci->msix_entries = NULL;
- xhci_dbg(xhci, "Finished cleaning up MSI-X\n");
+ xhci_free_irq(xhci);
+
+ if (xhci->msix_entries) {
+ pci_disable_msix(pdev);
+ kfree(xhci->msix_entries);
+ xhci->msix_entries = NULL;
+ } else {
+ pci_disable_msi(pdev);
+ }
+
+ return;
}
-#endif
/*
* Initialize memory for HCD and xHC (one-time init).
@@ -423,20 +498,36 @@ int xhci_run(struct usb_hcd *hcd)
{
u32 temp;
u64 temp_64;
+ u32 ret;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
void (*doorbell)(struct xhci_hcd *) = NULL;
hcd->uses_new_polling = 1;
xhci_dbg(xhci, "xhci_run\n");
-#if 0 /* FIXME: MSI not setup yet */
- /* Do this at the very last minute */
+ /* unregister the legacy interrupt */
+ if (hcd->irq)
+ free_irq(hcd->irq, hcd);
+ hcd->irq = -1;
+
ret = xhci_setup_msix(xhci);
- if (!ret)
- return ret;
+ if (ret)
+ /* fall back to msi*/
+ ret = xhci_setup_msi(xhci);
+
+ if (ret) {
+ /* fall back to legacy interrupt*/
+ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+ hcd->irq_descr, hcd);
+ if (ret) {
+ xhci_err(xhci, "request interrupt %d failed\n",
+ pdev->irq);
+ return ret;
+ }
+ hcd->irq = pdev->irq;
+ }
- return -ENOSYS;
-#endif
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
init_timer(&xhci->event_ring_timer);
xhci->event_ring_timer.data = (unsigned long) xhci;
@@ -520,11 +611,9 @@ void xhci_stop(struct usb_hcd *hcd)
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
xhci_reset(xhci);
+ xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
-#if 0 /* No MSI yet */
- xhci_cleanup_msix(xhci);
-#endif
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
/* Tell the event ring poll function not to reschedule */
xhci->zombie = 1;
@@ -558,11 +647,8 @@ void xhci_shutdown(struct usb_hcd *hcd)
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
- spin_unlock_irq(&xhci->lock);
-
-#if 0
xhci_cleanup_msix(xhci);
-#endif
+ spin_unlock_irq(&xhci->lock);
xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
xhci_readl(xhci, &xhci->op_regs->status));
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6c7e3430ec935..5bc03d1c2beb2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1130,7 +1130,7 @@ struct xhci_hcd {
int page_size;
/* Valid values are 12 to 20, inclusive */
int page_shift;
- /* only one MSI vector for now, but might need more later */
+ /* msi-x vectors */
int msix_count;
struct msix_entry *msix_entries;
/* data structures */
--
GitLab
From ae68a83bdc1971cb02fefc7a686ba6d077065e71 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 14 Jul 2010 11:03:23 -0400
Subject: [PATCH 794/863] USB: EHCI: remove PCI assumption
This patch (as1405) fixes a small bug in ehci-hcd's isochronous
scheduler. Not all EHCI controllers are PCI, and the code shouldn't
assume that they are. Instead, introduce a special flag for
controllers which need to delay iso scheduling for full-speed devices
beyond the scheduling threshold.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
CC: David Brownell <david-b@pacbell.net>
CC: stable <stable@kernel.org>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
---
drivers/usb/host/ehci-pci.c | 1 +
drivers/usb/host/ehci-sched.c | 10 ++++------
drivers/usb/host/ehci.h | 1 +
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f555e4f35a04b..58b72d741d931 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -114,6 +114,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
case PCI_VENDOR_ID_INTEL:
ehci->need_io_watchdog = 0;
+ ehci->fs_i_thresh = 1;
if (pdev->device == 0x27cc) {
ehci->broken_periodic = 1;
ehci_info(ehci, "using broken periodic workaround\n");
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index d640346f9b56b..efadced4ae675 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1399,7 +1399,6 @@ iso_stream_schedule (
int status;
unsigned mod = ehci->periodic_size << 3;
struct ehci_iso_sched *sched = urb->hcpriv;
- struct pci_dev *pdev;
if (sched->span > (mod - SCHEDULE_SLOP)) {
ehci_dbg (ehci, "iso request %p too long\n", urb);
@@ -1426,15 +1425,14 @@ iso_stream_schedule (
* slot in the schedule, implicitly assuming URB_ISO_ASAP.
*/
if (likely (!list_empty (&stream->td_list))) {
- pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
start = stream->next_uframe;
/* For high speed devices, allow scheduling within the
- * isochronous scheduling threshold. For full speed devices,
- * don't. (Work around for Intel ICH9 bug.)
+ * isochronous scheduling threshold. For full speed devices
+ * and Intel PCI-based controllers, don't (work around for
+ * Intel ICH9 bug).
*/
- if (!stream->highspeed &&
- pdev->vendor == PCI_VENDOR_ID_INTEL)
+ if (!stream->highspeed && ehci->fs_i_thresh)
next = now + ehci->i_thresh;
else
next = now;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index a4a63ce290e90..2c050efd1deba 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -130,6 +130,7 @@ struct ehci_hcd { /* one per controller */
unsigned has_amcc_usb23:1;
unsigned need_io_watchdog:1;
unsigned broken_periodic:1;
+ unsigned fs_i_thresh:1; /* Intel iso scheduling */
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
--
GitLab
From bccbefaae050186bed3bcc74b1fd1a9b8c6710b2 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 14 Jul 2010 11:03:36 -0400
Subject: [PATCH 795/863] USB: EHCI: simplify remainder computations
This patch (as1406) adds a micro-optimization to ehci-hcd's scheduling
code. Instead of computing remainders with respect to the schedule
length, use bitwise-and (which is quicker). We know that the schedule
length will always be a power of two, but the compiler doesn't have
this information.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-sched.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index efadced4ae675..27dd841b9aa29 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1417,7 +1417,7 @@ iso_stream_schedule (
if (!stream->highspeed)
period <<= 3;
- now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
+ now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1);
/* Typical case: reuse current schedule, stream is still active.
* Hopefully there are no gaps from the host falling behind
@@ -1461,7 +1461,7 @@ iso_stream_schedule (
* jump until after the queue is primed.
*/
start = SCHEDULE_SLOP + (now & ~0x07);
- start %= mod;
+ start &= mod - 1;
stream->next_uframe = start;
/* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */
@@ -1483,7 +1483,7 @@ iso_stream_schedule (
/* schedule it here if there's enough bandwidth */
if (enough_space) {
- stream->next_uframe = start % mod;
+ stream->next_uframe = start & (mod - 1);
goto ready;
}
}
@@ -1599,7 +1599,7 @@ itd_link_urb (
struct ehci_iso_sched *iso_sched = urb->hcpriv;
struct ehci_itd *itd;
- next_uframe = stream->next_uframe % mod;
+ next_uframe = stream->next_uframe & (mod - 1);
if (unlikely (list_empty(&stream->td_list))) {
ehci_to_hcd(ehci)->self.bandwidth_allocated
@@ -1637,13 +1637,13 @@ itd_link_urb (
next_uframe += stream->interval;
stream->depth += stream->interval;
- next_uframe %= mod;
+ next_uframe &= mod - 1;
packet++;
/* link completed itds into the schedule */
if (((next_uframe >> 3) != frame)
|| packet == urb->number_of_packets) {
- itd_link (ehci, frame % ehci->periodic_size, itd);
+ itd_link(ehci, frame & (ehci->periodic_size - 1), itd);
itd = NULL;
}
}
@@ -2020,7 +2020,7 @@ sitd_link_urb (
"sched devp %s ep%d%s-iso [%d] %dms/%04x\n",
urb->dev->devpath, stream->bEndpointAddress & 0x0f,
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
- (next_uframe >> 3) % ehci->periodic_size,
+ (next_uframe >> 3) & (ehci->periodic_size - 1),
stream->interval, hc32_to_cpu(ehci, stream->splits));
stream->start = jiffies;
}
@@ -2043,13 +2043,13 @@ sitd_link_urb (
sitd->urb = urb;
sitd_patch(ehci, stream, sitd, sched, packet);
- sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size,
+ sitd_link(ehci, (next_uframe >> 3) & (ehci->periodic_size - 1),
sitd);
next_uframe += stream->interval << 3;
stream->depth += stream->interval << 3;
}
- stream->next_uframe = next_uframe % mod;
+ stream->next_uframe = next_uframe & (mod - 1);
/* don't need that schedule data any more */
iso_sched_free (stream, sched);
@@ -2258,7 +2258,7 @@ scan_periodic (struct ehci_hcd *ehci)
now_uframe = ehci->next_uframe;
if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
clock = ehci_readl(ehci, &ehci->regs->frame_index);
- clock_frame = (clock >> 3) % ehci->periodic_size;
+ clock_frame = (clock >> 3) & (ehci->periodic_size - 1);
} else {
clock = now_uframe + mod - 1;
clock_frame = -1;
@@ -2267,7 +2267,7 @@ scan_periodic (struct ehci_hcd *ehci)
free_cached_lists(ehci);
ehci->clock_frame = clock_frame;
}
- clock %= mod;
+ clock &= mod - 1;
clock_frame = clock >> 3;
for (;;) {
@@ -2356,7 +2356,7 @@ scan_periodic (struct ehci_hcd *ehci)
* frame is current.
*/
if (((frame == clock_frame) ||
- (((frame + 1) % ehci->periodic_size)
+ (((frame + 1) & (ehci->periodic_size - 1))
== clock_frame))
&& live
&& (q.sitd->hw_results &
@@ -2423,7 +2423,8 @@ scan_periodic (struct ehci_hcd *ehci)
|| ehci->periodic_sched == 0)
break;
ehci->next_uframe = now_uframe;
- now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
+ now = ehci_readl(ehci, &ehci->regs->frame_index) &
+ (mod - 1);
if (now_uframe == now)
break;
@@ -2436,7 +2437,7 @@ scan_periodic (struct ehci_hcd *ehci)
}
} else {
now_uframe++;
- now_uframe %= mod;
+ now_uframe &= mod - 1;
}
}
}
--
GitLab
From ffda080353979273e8aa69fc1e6134f20643ae56 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 14 Jul 2010 11:03:46 -0400
Subject: [PATCH 796/863] USB: EHCI: add missing frame -> microframe conversion
This patch (as1407) fixes a bug in ehci-hcd's isochronous scheduler.
All its calculations should be done in terms of microframes, but for
full-speed devices, sched->span is stored in frames. It needs to be
converted.
This fix is liable to expose problems in other drivers. The old code
would accept URBs that should not have been accepted, so drivers have
had no reason to avoid submitting URBs that exceeded the maximum
schedule length. In an attempt to partially compensate for this, the
patch also adjusts the schedule length from a minimum of 256 frames up
to a minimum of 512 frames.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-hcd.c | 8 +++++++-
drivers/usb/host/ehci-sched.c | 21 ++++++++++++---------
2 files changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2e704fa3cedfb..34a928d3b7d2f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -79,7 +79,13 @@ static const char hcd_name [] = "ehci_hcd";
#define EHCI_TUNE_RL_TT 0
#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
#define EHCI_TUNE_MULT_TT 1
-#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
+/*
+ * Some drivers think it's safe to schedule isochronous transfers more than
+ * 256 ms into the future (partly as a result of an old bug in the scheduling
+ * code). In an attempt to avoid trouble, we will use a minimum scheduling
+ * length of 512 frames instead of 256.
+ */
+#define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */
#define EHCI_IAA_MSECS 10 /* arbitrary */
#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 27dd841b9aa29..dd37350170bb4 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1395,28 +1395,31 @@ iso_stream_schedule (
struct ehci_iso_stream *stream
)
{
- u32 now, next, start, period;
+ u32 now, next, start, period, span;
int status;
unsigned mod = ehci->periodic_size << 3;
struct ehci_iso_sched *sched = urb->hcpriv;
- if (sched->span > (mod - SCHEDULE_SLOP)) {
+ period = urb->interval;
+ span = sched->span;
+ if (!stream->highspeed) {
+ period <<= 3;
+ span <<= 3;
+ }
+
+ if (span > mod - SCHEDULE_SLOP) {
ehci_dbg (ehci, "iso request %p too long\n", urb);
status = -EFBIG;
goto fail;
}
- if ((stream->depth + sched->span) > mod) {
+ if (stream->depth + span > mod) {
ehci_dbg (ehci, "request %p would overflow (%d+%d>%d)\n",
- urb, stream->depth, sched->span, mod);
+ urb, stream->depth, span, mod);
status = -EFBIG;
goto fail;
}
- period = urb->interval;
- if (!stream->highspeed)
- period <<= 3;
-
now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1);
/* Typical case: reuse current schedule, stream is still active.
@@ -1445,7 +1448,7 @@ iso_stream_schedule (
period);
/* Tried to schedule too far into the future? */
- if (unlikely(((start - now) & (mod - 1)) + sched->span
+ if (unlikely(((start - now) & (mod - 1)) + span
>= mod - 2 * SCHEDULE_SLOP)) {
status = -EFBIG;
goto fail;
--
GitLab
From 1fb2e0558781b07d2ecaabf94c81c17ac820d8f0 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 14 Jul 2010 11:03:53 -0400
Subject: [PATCH 797/863] USB: EHCI: reorganize isochronous scheduler routine
This patch (as1408) rearranges the scheduling code in ehci-hcd, partly
to improve its structure, but mainly to change the way it works.
Whether or not a transfer exceeds the hardware schedule length will
now be determined by looking at the last frame the transfer would use,
instead of the first available frame following the end of the transfer.
The benefit of this change is that it allows the driver to accept
valid URBs which would otherwise be rejected. For example, suppose
the schedule length is 1024 frames, the endpoint period is 256 frames,
and a four-packet URB is submitted. The four transfers would occupy
slots that are 0, 256, 512, and 768 frames past the current frame
(plus an extra slop factor). These don't exceed the 1024-frame limit,
so the URB should be accepted. But the current code notices that the
next available slot would be 1024 frames (plus slop) in the future,
which is beyond the limit, and so the URB is rejected unnecessarily.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-sched.c | 110 ++++++++++++++++++----------------
1 file changed, 57 insertions(+), 53 deletions(-)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index dd37350170bb4..3381319a2b3fc 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1413,13 +1413,6 @@ iso_stream_schedule (
goto fail;
}
- if (stream->depth + span > mod) {
- ehci_dbg (ehci, "request %p would overflow (%d+%d>%d)\n",
- urb, stream->depth, span, mod);
- status = -EFBIG;
- goto fail;
- }
-
now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1);
/* Typical case: reuse current schedule, stream is still active.
@@ -1428,7 +1421,7 @@ iso_stream_schedule (
* slot in the schedule, implicitly assuming URB_ISO_ASAP.
*/
if (likely (!list_empty (&stream->td_list))) {
- start = stream->next_uframe;
+ u32 excess;
/* For high speed devices, allow scheduling within the
* isochronous scheduling threshold. For full speed devices
@@ -1440,21 +1433,23 @@ iso_stream_schedule (
else
next = now;
- /* Fell behind (by up to twice the slop amount)? */
- if (((start - next) & (mod - 1)) >=
- mod - 2 * SCHEDULE_SLOP)
- start += period * DIV_ROUND_UP(
- (next - start) & (mod - 1),
- period);
-
- /* Tried to schedule too far into the future? */
- if (unlikely(((start - now) & (mod - 1)) + span
- >= mod - 2 * SCHEDULE_SLOP)) {
+ /* Fell behind (by up to twice the slop amount)?
+ * We decide based on the time of the last currently-scheduled
+ * slot, not the time of the next available slot.
+ */
+ excess = (stream->next_uframe - period - next) & (mod - 1);
+ if (excess >= mod - 2 * SCHEDULE_SLOP)
+ start = next + excess - mod + period *
+ DIV_ROUND_UP(mod - excess, period);
+ else
+ start = next + excess + period;
+ if (start - now >= mod) {
+ ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
+ urb, start - now - period, period,
+ mod);
status = -EFBIG;
goto fail;
}
- stream->next_uframe = start;
- goto ready;
}
/* need to schedule; when's the next (u)frame we could start?
@@ -1463,51 +1458,60 @@ iso_stream_schedule (
* can also help high bandwidth if the dma and irq loads don't
* jump until after the queue is primed.
*/
- start = SCHEDULE_SLOP + (now & ~0x07);
- start &= mod - 1;
- stream->next_uframe = start;
-
- /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */
-
- /* find a uframe slot with enough bandwidth */
- for (; start < (stream->next_uframe + period); start++) {
- int enough_space;
-
- /* check schedule: enough space? */
- if (stream->highspeed)
- enough_space = itd_slot_ok (ehci, mod, start,
- stream->usecs, period);
- else {
- if ((start % 8) >= 6)
- continue;
- enough_space = sitd_slot_ok (ehci, mod, stream,
- start, sched, period);
+ else {
+ start = SCHEDULE_SLOP + (now & ~0x07);
+
+ /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */
+
+ /* find a uframe slot with enough bandwidth */
+ next = start + period;
+ for (; start < next; start++) {
+
+ /* check schedule: enough space? */
+ if (stream->highspeed) {
+ if (itd_slot_ok(ehci, mod, start,
+ stream->usecs, period))
+ break;
+ } else {
+ if ((start % 8) >= 6)
+ continue;
+ if (sitd_slot_ok(ehci, mod, stream,
+ start, sched, period))
+ break;
+ }
}
- /* schedule it here if there's enough bandwidth */
- if (enough_space) {
- stream->next_uframe = start & (mod - 1);
- goto ready;
+ /* no room in the schedule */
+ if (start == next) {
+ ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n",
+ urb, now, now + mod);
+ status = -ENOSPC;
+ goto fail;
}
}
- /* no room in the schedule */
- ehci_dbg (ehci, "iso %ssched full %p (now %d max %d)\n",
- list_empty (&stream->td_list) ? "" : "re",
- urb, now, now + mod);
- status = -ENOSPC;
+ /* Tried to schedule too far into the future? */
+ if (unlikely(start - now + span - period
+ >= mod - 2 * SCHEDULE_SLOP)) {
+ ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
+ urb, start - now, span - period,
+ mod - 2 * SCHEDULE_SLOP);
+ status = -EFBIG;
+ goto fail;
+ }
-fail:
- iso_sched_free (stream, sched);
- urb->hcpriv = NULL;
- return status;
+ stream->next_uframe = start & (mod - 1);
-ready:
/* report high speed start in uframes; full speed, in frames */
urb->start_frame = stream->next_uframe;
if (!stream->highspeed)
urb->start_frame >>= 3;
return 0;
+
+ fail:
+ iso_sched_free(stream, sched);
+ urb->hcpriv = NULL;
+ return status;
}
/*-------------------------------------------------------------------------*/
--
GitLab
From 88d8aa462b8a2128a75b96a0134b22f724ca45d1 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 14 Jul 2010 11:03:57 -0400
Subject: [PATCH 798/863] USB: EHCI: remove dead code in the periodic scheduler
This patch (as1409) removes some dead code from the ehci-hcd
scheduler. Thanks to the previous patch in this series, stream->depth
is no longer used. And stream->start and stream->rescheduled
apparently have not been used for quite a while, except in some
statistics-reporting code that never gets invoked.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-sched.c | 15 ---------------
drivers/usb/host/ehci.h | 3 ---
2 files changed, 18 deletions(-)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 3381319a2b3fc..a92526d6e5aeb 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1074,15 +1074,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream)
if (stream->ep)
stream->ep->hcpriv = NULL;
- if (stream->rescheduled) {
- ehci_info (ehci, "ep%d%s-iso rescheduled "
- "%lu times in %lu seconds\n",
- stream->bEndpointAddress, is_in ? "in" : "out",
- stream->rescheduled,
- ((jiffies - stream->start)/HZ)
- );
- }
-
kfree(stream);
}
}
@@ -1617,7 +1608,6 @@ itd_link_urb (
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
urb->interval,
next_uframe >> 3, next_uframe & 0x7);
- stream->start = jiffies;
}
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
@@ -1643,7 +1633,6 @@ itd_link_urb (
itd_patch(ehci, itd, iso_sched, packet, uframe);
next_uframe += stream->interval;
- stream->depth += stream->interval;
next_uframe &= mod - 1;
packet++;
@@ -1699,7 +1688,6 @@ itd_complete (
t = hc32_to_cpup(ehci, &itd->hw_transaction [uframe]);
itd->hw_transaction [uframe] = 0;
- stream->depth -= stream->interval;
/* report transfer status */
if (unlikely (t & ISO_ERRS)) {
@@ -2029,7 +2017,6 @@ sitd_link_urb (
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
(next_uframe >> 3) & (ehci->periodic_size - 1),
stream->interval, hc32_to_cpu(ehci, stream->splits));
- stream->start = jiffies;
}
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
@@ -2054,7 +2041,6 @@ sitd_link_urb (
sitd);
next_uframe += stream->interval << 3;
- stream->depth += stream->interval << 3;
}
stream->next_uframe = next_uframe & (mod - 1);
@@ -2114,7 +2100,6 @@ sitd_complete (
desc->actual_length = desc->length - SITD_LENGTH(t);
urb->actual_length += desc->actual_length;
}
- stream->depth -= stream->interval << 3;
/* handle completion now? */
if ((urb_index + 1) != urb->number_of_packets)
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 2c050efd1deba..e5b9ece8a077e 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -404,15 +404,12 @@ struct ehci_iso_stream {
u32 refcount;
u8 bEndpointAddress;
u8 highspeed;
- u16 depth; /* depth in uframes */
struct list_head td_list; /* queued itds/sitds */
struct list_head free_list; /* list of unused itds/sitds */
struct usb_device *udev;
struct usb_host_endpoint *ep;
/* output of (re)scheduling */
- unsigned long start; /* jiffies */
- unsigned long rescheduled;
int next_uframe;
__hc32 splits;
--
GitLab
From 92eb2a5e533f39e8afc831acbbfdabe91cd0c20a Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Mon, 19 Jul 2010 11:47:04 +0200
Subject: [PATCH 799/863] USB: gadget: functionfs: stale Makefile entry removed
Removed entry referencing g_eth_ffs.c file from Makefile.
The file never existed and the line was a leftover from a
developing process.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/Makefile | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 397b892e90e2b..27283df37d092 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -53,7 +53,6 @@ obj-$(CONFIG_USB_AUDIO) += g_audio.o
obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o
-obj-$(CONFIG_USB_ETH_FUNCTIONFS) += g_eth_ffs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
--
GitLab
From 33d973ad88ceb83ed1449592b7574b5b5bb33ac6 Mon Sep 17 00:00:00 2001
From: Steven Robertson <steven@strobe.cc>
Date: Wed, 21 Jul 2010 16:38:44 -0400
Subject: [PATCH 800/863] USB: resizing usbmon binary interface buffer causes
protection faults
Enlarging the buffer size via the MON_IOCT_RING_SIZE ioctl causes
general protection faults. It appears the culprit is an incorrect
argument to mon_free_buff: instead of passing the size of the current
buffer being freed, the size of the new buffer is passed.
Use the correct size argument to mon_free_buff when changing the size of
the buffer.
Signed-off-by: Steven Robertson <steven@strobe.cc>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/mon/mon_bin.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 1be0b9f933662..44cb37b5a4dc1 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1004,7 +1004,7 @@ static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg
mutex_lock(&rp->fetch_lock);
spin_lock_irqsave(&rp->b_lock, flags);
- mon_free_buff(rp->b_vec, size/CHUNK_SIZE);
+ mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE);
kfree(rp->b_vec);
rp->b_vec = vec;
rp->b_size = size;
--
GitLab
From 93362a875fc69881ae69299efaf19a55a1f57db0 Mon Sep 17 00:00:00 2001
From: Phil Dibowitz <phil@ipom.com>
Date: Thu, 22 Jul 2010 00:05:01 +0200
Subject: [PATCH 801/863] USB delay init quirk for logitech Harmony 700-series
devices
The Logitech Harmony 700 series needs an extra delay during
initialization. This patch adds a USB quirk which enables such a delay
and adds the device to the quirks list.
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/hub.c | 6 +++++-
drivers/usb/core/quirks.c | 3 +++
include/linux/usb/quirks.h | 4 ++++
3 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d337ef80bf434..84c1897188d27 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -20,6 +20,7 @@
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
@@ -1802,7 +1803,6 @@ int usb_new_device(struct usb_device *udev)
pm_runtime_set_active(&udev->dev);
pm_runtime_enable(&udev->dev);
- usb_detect_quirks(udev);
err = usb_enumerate_device(udev); /* Read descriptors */
if (err < 0)
goto fail;
@@ -3114,6 +3114,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
if (status < 0)
goto loop;
+ usb_detect_quirks(udev);
+ if (udev->quirks & USB_QUIRK_DELAY_INIT)
+ msleep(1000);
+
/* consecutive bus-powered hubs aren't reliable; they can
* violate the voltage drop budget. if the new child has
* a "powered" LED, users should notice we didn't enable it
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index db99c084df92e..25719da45e338 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -38,6 +38,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Harmony 700-series */
+ { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
+
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 16b7f33475459..3e93de7ecbc36 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -26,4 +26,8 @@
and can't handle talking to these interfaces */
#define USB_QUIRK_HONOR_BNUMINTERFACES 0x00000020
+/* device needs a pause during initialization, after we read the device
+ descriptor */
+#define USB_QUIRK_DELAY_INIT 0x00000040
+
#endif /* __LINUX_USB_QUIRKS_H */
--
GitLab
From b972302b0a13aaddc9e90da2b4b52722e5d0e776 Mon Sep 17 00:00:00 2001
From: Pavel Kazlou <p.i.kazlou@gmail.com>
Date: Thu, 22 Jul 2010 03:22:20 +0300
Subject: [PATCH 802/863] USB: option: Huawei ETS 1220 support added
The patch adds Huawei ETS 1220 product id into the list of supported
devices in 'option' usb serial driver.
Signed-off-by: Pavel Kazlou <p.i.kazlou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a8c54b2116a65..051c00ce5d2a2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -146,6 +146,7 @@ static void option_instat_callback(struct urb *urb);
#define HUAWEI_PRODUCT_E143E 0x143E
#define HUAWEI_PRODUCT_E143F 0x143F
#define HUAWEI_PRODUCT_E14AC 0x14AC
+#define HUAWEI_PRODUCT_ETS1220 0x1803
#define QUANTA_VENDOR_ID 0x0408
#define QUANTA_PRODUCT_Q101 0xEA02
@@ -479,6 +480,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
--
GitLab
From 4422da61550b2fe5089c5cdc374ceea33e581773 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:22:55 -0700
Subject: [PATCH 803/863] USB: xHCI: handle_tx_event() refactor: finish_td
This patch moves the td universal processing part in handle_tx_event()
into a separate function finish_td().
if finish_td() returns 1, it indicates the urb can be given back.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 185 +++++++++++++++++++++--------------
1 file changed, 112 insertions(+), 73 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bfc99a9394550..691a108295ea7 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1257,6 +1257,104 @@ int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
return 0;
}
+/*
+ * Finish the td processing, remove the td from td list;
+ * Return 1 if the urb can be given back.
+ */
+static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ union xhci_trb *event_trb, struct xhci_transfer_event *event,
+ struct xhci_virt_ep *ep, int *status, bool skip)
+{
+ struct xhci_virt_device *xdev;
+ struct xhci_ring *ep_ring;
+ unsigned int slot_id;
+ int ep_index;
+ struct urb *urb = NULL;
+ struct xhci_ep_ctx *ep_ctx;
+ int ret = 0;
+ u32 trb_comp_code;
+
+ slot_id = TRB_TO_SLOT_ID(event->flags);
+ xdev = xhci->devs[slot_id];
+ ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+
+ if (skip)
+ goto td_cleanup;
+
+ if (trb_comp_code == COMP_STOP_INVAL ||
+ trb_comp_code == COMP_STOP) {
+ /* The Endpoint Stop Command completion will take care of any
+ * stopped TDs. A stopped TD may be restarted, so don't update
+ * the ring dequeue pointer or take this TD off any lists yet.
+ */
+ ep->stopped_td = td;
+ ep->stopped_trb = event_trb;
+ return 0;
+ } else {
+ if (trb_comp_code == COMP_STALL) {
+ /* The transfer is completed from the driver's
+ * perspective, but we need to issue a set dequeue
+ * command for this stalled endpoint to move the dequeue
+ * pointer past the TD. We can't do that here because
+ * the halt condition must be cleared first. Let the
+ * USB class driver clear the stall later.
+ */
+ ep->stopped_td = td;
+ ep->stopped_trb = event_trb;
+ ep->stopped_stream = ep_ring->stream_id;
+ } else if (xhci_requires_manual_halt_cleanup(xhci,
+ ep_ctx, trb_comp_code)) {
+ /* Other types of errors halt the endpoint, but the
+ * class driver doesn't call usb_reset_endpoint() unless
+ * the error is -EPIPE. Clear the halted status in the
+ * xHCI hardware manually.
+ */
+ xhci_cleanup_halted_endpoint(xhci,
+ slot_id, ep_index, ep_ring->stream_id,
+ td, event_trb);
+ } else {
+ /* Update ring dequeue pointer */
+ while (ep_ring->dequeue != td->last_trb)
+ inc_deq(xhci, ep_ring, false);
+ inc_deq(xhci, ep_ring, false);
+ }
+
+td_cleanup:
+ /* Clean up the endpoint's TD list */
+ urb = td->urb;
+
+ /* Do one last check of the actual transfer length.
+ * If the host controller said we transferred more data than
+ * the buffer length, urb->actual_length will be a very big
+ * number (since it's unsigned). Play it safe and say we didn't
+ * transfer anything.
+ */
+ if (urb->actual_length > urb->transfer_buffer_length) {
+ xhci_warn(xhci, "URB transfer length is wrong, "
+ "xHC issue? req. len = %u, "
+ "act. len = %u\n",
+ urb->transfer_buffer_length,
+ urb->actual_length);
+ urb->actual_length = 0;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ }
+ list_del(&td->td_list);
+ /* Was this TD slated to be cancelled but completed anyway? */
+ if (!list_empty(&td->cancelled_td_list))
+ list_del(&td->cancelled_td_list);
+
+ ret = 1;
+ }
+
+ return ret;
+}
+
/*
* If this function returns an error condition, it means it got a Transfer
* event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
@@ -1278,6 +1376,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
int status = -EINPROGRESS;
struct xhci_ep_ctx *ep_ctx;
u32 trb_comp_code;
+ int ret = 0;
xhci_dbg(xhci, "In %s\n", __func__);
slot_id = TRB_TO_SLOT_ID(event->flags);
@@ -1308,7 +1407,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
- urb = NULL;
goto cleanup;
}
xhci_dbg(xhci, "%s - getting list entry\n", __func__);
@@ -1379,7 +1477,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
break;
}
xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n");
- urb = NULL;
goto cleanup;
}
/* Now update the urb's actual_length and give back to the core */
@@ -1427,7 +1524,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_cleanup_halted_endpoint(xhci,
slot_id, ep_index, 0, td, event_trb);
- goto td_cleanup;
+
+ ret = finish_td(xhci, td, event_trb, event, ep,
+ &status, true);
+ goto cleanup;
}
/*
* Did we transfer any data, despite the errors that might have
@@ -1456,7 +1556,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
td->urb->transfer_buffer_length -
TRB_LEN(event->transfer_len);
xhci_dbg(xhci, "Waiting for status stage event\n");
- urb = NULL;
goto cleanup;
}
}
@@ -1558,68 +1657,16 @@ static int handle_tx_event(struct xhci_hcd *xhci,
TRB_LEN(event->transfer_len);
}
}
- if (trb_comp_code == COMP_STOP_INVAL ||
- trb_comp_code == COMP_STOP) {
- /* The Endpoint Stop Command completion will take care of any
- * stopped TDs. A stopped TD may be restarted, so don't update
- * the ring dequeue pointer or take this TD off any lists yet.
- */
- ep->stopped_td = td;
- ep->stopped_trb = event_trb;
- } else {
- if (trb_comp_code == COMP_STALL) {
- /* The transfer is completed from the driver's
- * perspective, but we need to issue a set dequeue
- * command for this stalled endpoint to move the dequeue
- * pointer past the TD. We can't do that here because
- * the halt condition must be cleared first. Let the
- * USB class driver clear the stall later.
- */
- ep->stopped_td = td;
- ep->stopped_trb = event_trb;
- ep->stopped_stream = ep_ring->stream_id;
- } else if (xhci_requires_manual_halt_cleanup(xhci,
- ep_ctx, trb_comp_code)) {
- /* Other types of errors halt the endpoint, but the
- * class driver doesn't call usb_reset_endpoint() unless
- * the error is -EPIPE. Clear the halted status in the
- * xHCI hardware manually.
- */
- xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, ep_ring->stream_id, td, event_trb);
- } else {
- /* Update ring dequeue pointer */
- while (ep_ring->dequeue != td->last_trb)
- inc_deq(xhci, ep_ring, false);
- inc_deq(xhci, ep_ring, false);
- }
-td_cleanup:
- /* Clean up the endpoint's TD list */
- urb = td->urb;
- /* Do one last check of the actual transfer length.
- * If the host controller said we transferred more data than
- * the buffer length, urb->actual_length will be a very big
- * number (since it's unsigned). Play it safe and say we didn't
- * transfer anything.
- */
- if (urb->actual_length > urb->transfer_buffer_length) {
- xhci_warn(xhci, "URB transfer length is wrong, "
- "xHC issue? req. len = %u, "
- "act. len = %u\n",
- urb->transfer_buffer_length,
- urb->actual_length);
- urb->actual_length = 0;
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- }
- list_del(&td->td_list);
- /* Was this TD slated to be cancelled but completed anyway? */
- if (!list_empty(&td->cancelled_td_list))
- list_del(&td->cancelled_td_list);
+ ret = finish_td(xhci, td, event_trb, event, ep, &status, false);
+cleanup:
+ inc_deq(xhci, xhci->event_ring, true);
+ xhci_set_hc_event_deq(xhci);
+
+ /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
+ if (ret) {
+ urb = td->urb;
/* Leave the TD around for the reset endpoint function to use
* (but only if it's not a control endpoint, since we already
* queued the Set TR dequeue pointer command for stalled
@@ -1627,17 +1674,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
*/
if (usb_endpoint_xfer_control(&urb->ep->desc) ||
(trb_comp_code != COMP_STALL &&
- trb_comp_code != COMP_BABBLE)) {
+ trb_comp_code != COMP_BABBLE))
kfree(td);
- }
- urb->hcpriv = NULL;
- }
-cleanup:
- inc_deq(xhci, xhci->event_ring, true);
- xhci_set_hc_event_deq(xhci);
- /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
- if (urb) {
usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
urb, urb->actual_length, status);
--
GitLab
From 8af56be185a94e39c80ce90fc9f83f3058a3ce80 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:03 -0700
Subject: [PATCH 804/863] USB: xHCI: handle_tx_event() refactor:
process_ctrl_td
This patch moves the ctrl td processing part in handle_tx_event()
into a separate function process_ctrl_td().
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 184 ++++++++++++++++++++---------------
1 file changed, 106 insertions(+), 78 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 691a108295ea7..e28cfd15e1a6a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1355,6 +1355,109 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
return ret;
}
+/*
+ * Process control tds, update urb status and actual_length.
+ */
+static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ union xhci_trb *event_trb, struct xhci_transfer_event *event,
+ struct xhci_virt_ep *ep, int *status)
+{
+ struct xhci_virt_device *xdev;
+ struct xhci_ring *ep_ring;
+ unsigned int slot_id;
+ int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 trb_comp_code;
+
+ slot_id = TRB_TO_SLOT_ID(event->flags);
+ xdev = xhci->devs[slot_id];
+ ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+
+ xhci_debug_trb(xhci, xhci->event_ring->dequeue);
+ switch (trb_comp_code) {
+ case COMP_SUCCESS:
+ if (event_trb == ep_ring->dequeue) {
+ xhci_warn(xhci, "WARN: Success on ctrl setup TRB "
+ "without IOC set??\n");
+ *status = -ESHUTDOWN;
+ } else if (event_trb != td->last_trb) {
+ xhci_warn(xhci, "WARN: Success on ctrl data TRB "
+ "without IOC set??\n");
+ *status = -ESHUTDOWN;
+ } else {
+ xhci_dbg(xhci, "Successful control transfer!\n");
+ *status = 0;
+ }
+ break;
+ case COMP_SHORT_TX:
+ xhci_warn(xhci, "WARN: short transfer on control ep\n");
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ break;
+ default:
+ if (!xhci_requires_manual_halt_cleanup(xhci,
+ ep_ctx, trb_comp_code))
+ break;
+ xhci_dbg(xhci, "TRB error code %u, "
+ "halted endpoint index = %u\n",
+ trb_comp_code, ep_index);
+ /* else fall through */
+ case COMP_STALL:
+ /* Did we transfer part of the data (middle) phase? */
+ if (event_trb != ep_ring->dequeue &&
+ event_trb != td->last_trb)
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length
+ - TRB_LEN(event->transfer_len);
+ else
+ td->urb->actual_length = 0;
+
+ xhci_cleanup_halted_endpoint(xhci,
+ slot_id, ep_index, 0, td, event_trb);
+ return finish_td(xhci, td, event_trb, event, ep, status, true);
+ }
+ /*
+ * Did we transfer any data, despite the errors that might have
+ * happened? I.e. did we get past the setup stage?
+ */
+ if (event_trb != ep_ring->dequeue) {
+ /* The event was for the status stage */
+ if (event_trb == td->last_trb) {
+ if (td->urb->actual_length != 0) {
+ /* Don't overwrite a previously set error code
+ */
+ if ((*status == -EINPROGRESS || *status == 0) &&
+ (td->urb->transfer_flags
+ & URB_SHORT_NOT_OK))
+ /* Did we already see a short data
+ * stage? */
+ *status = -EREMOTEIO;
+ } else {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ }
+ } else {
+ /* Maybe the event was for the data stage? */
+ if (trb_comp_code != COMP_STOP_INVAL) {
+ /* We didn't stop on a link TRB in the middle */
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length -
+ TRB_LEN(event->transfer_len);
+ xhci_dbg(xhci, "Waiting for status "
+ "stage event\n");
+ return 0;
+ }
+ }
+ }
+
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
/*
* If this function returns an error condition, it means it got a Transfer
* event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
@@ -1482,84 +1585,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* Now update the urb's actual_length and give back to the core */
/* Was this a control transfer? */
if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
- xhci_debug_trb(xhci, xhci->event_ring->dequeue);
- switch (trb_comp_code) {
- case COMP_SUCCESS:
- if (event_trb == ep_ring->dequeue) {
- xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
- status = -ESHUTDOWN;
- } else if (event_trb != td->last_trb) {
- xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n");
- status = -ESHUTDOWN;
- } else {
- xhci_dbg(xhci, "Successful control transfer!\n");
- status = 0;
- }
- break;
- case COMP_SHORT_TX:
- xhci_warn(xhci, "WARN: short transfer on control ep\n");
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- break;
-
- default:
- if (!xhci_requires_manual_halt_cleanup(xhci,
- ep_ctx, trb_comp_code))
- break;
- xhci_dbg(xhci, "TRB error code %u, "
- "halted endpoint index = %u\n",
- trb_comp_code, ep_index);
- /* else fall through */
- case COMP_STALL:
- /* Did we transfer part of the data (middle) phase? */
- if (event_trb != ep_ring->dequeue &&
- event_trb != td->last_trb)
- td->urb->actual_length =
- td->urb->transfer_buffer_length
- - TRB_LEN(event->transfer_len);
- else
- td->urb->actual_length = 0;
-
- xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, 0, td, event_trb);
-
- ret = finish_td(xhci, td, event_trb, event, ep,
- &status, true);
- goto cleanup;
- }
- /*
- * Did we transfer any data, despite the errors that might have
- * happened? I.e. did we get past the setup stage?
- */
- if (event_trb != ep_ring->dequeue) {
- /* The event was for the status stage */
- if (event_trb == td->last_trb) {
- if (td->urb->actual_length != 0) {
- /* Don't overwrite a previously set error code */
- if ((status == -EINPROGRESS ||
- status == 0) &&
- (td->urb->transfer_flags
- & URB_SHORT_NOT_OK))
- /* Did we already see a short data stage? */
- status = -EREMOTEIO;
- } else {
- td->urb->actual_length =
- td->urb->transfer_buffer_length;
- }
- } else {
- /* Maybe the event was for the data stage? */
- if (trb_comp_code != COMP_STOP_INVAL) {
- /* We didn't stop on a link TRB in the middle */
- td->urb->actual_length =
- td->urb->transfer_buffer_length -
- TRB_LEN(event->transfer_len);
- xhci_dbg(xhci, "Waiting for status stage event\n");
- goto cleanup;
- }
- }
- }
+ ret = process_ctrl_td(xhci, td, event_trb, event, ep,
+ &status);
+ goto cleanup;
} else {
switch (trb_comp_code) {
case COMP_SUCCESS:
--
GitLab
From 22405ed2e1bd8d2676cb45c578bdd05527ce25b9 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:08 -0700
Subject: [PATCH 805/863] USB xHCI: handle_tx_event() refactor:
process_bulk_intr_td
This patch moves the bulk and interrupt td processing part in
handle_tx_event() into a separate function process_bulk_intr_td().
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 216 +++++++++++++++++++----------------
1 file changed, 115 insertions(+), 101 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index e28cfd15e1a6a..83580cf794d16 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1458,6 +1458,117 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
return finish_td(xhci, td, event_trb, event, ep, status, false);
}
+/*
+ * Process bulk and interrupt tds, update urb status and actual_length.
+ */
+static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ union xhci_trb *event_trb, struct xhci_transfer_event *event,
+ struct xhci_virt_ep *ep, int *status)
+{
+ struct xhci_ring *ep_ring;
+ union xhci_trb *cur_trb;
+ struct xhci_segment *cur_seg;
+ u32 trb_comp_code;
+
+ ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+
+ switch (trb_comp_code) {
+ case COMP_SUCCESS:
+ /* Double check that the HW transferred everything. */
+ if (event_trb != td->last_trb) {
+ xhci_warn(xhci, "WARN Successful completion "
+ "on short TX\n");
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ } else {
+ if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
+ xhci_dbg(xhci, "Successful bulk "
+ "transfer!\n");
+ else
+ xhci_dbg(xhci, "Successful interrupt "
+ "transfer!\n");
+ *status = 0;
+ }
+ break;
+ case COMP_SHORT_TX:
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ break;
+ default:
+ /* Others already handled above */
+ break;
+ }
+ dev_dbg(&td->urb->dev->dev,
+ "ep %#x - asked for %d bytes, "
+ "%d bytes untransferred\n",
+ td->urb->ep->desc.bEndpointAddress,
+ td->urb->transfer_buffer_length,
+ TRB_LEN(event->transfer_len));
+ /* Fast path - was this the last TRB in the TD for this URB? */
+ if (event_trb == td->last_trb) {
+ if (TRB_LEN(event->transfer_len) != 0) {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length -
+ TRB_LEN(event->transfer_len);
+ if (td->urb->transfer_buffer_length <
+ td->urb->actual_length) {
+ xhci_warn(xhci, "HC gave bad length "
+ "of %d bytes left\n",
+ TRB_LEN(event->transfer_len));
+ td->urb->actual_length = 0;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ }
+ /* Don't overwrite a previously set error code */
+ if (*status == -EINPROGRESS) {
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ }
+ } else {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ /* Ignore a short packet completion if the
+ * untransferred length was zero.
+ */
+ if (*status == -EREMOTEIO)
+ *status = 0;
+ }
+ } else {
+ /* Slow path - walk the list, starting from the dequeue
+ * pointer, to get the actual length transferred.
+ */
+ td->urb->actual_length = 0;
+ for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
+ cur_trb != event_trb;
+ next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+ if ((cur_trb->generic.field[3] &
+ TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
+ (cur_trb->generic.field[3] &
+ TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
+ td->urb->actual_length +=
+ TRB_LEN(cur_trb->generic.field[2]);
+ }
+ /* If the ring didn't stop on a Link or No-op TRB, add
+ * in the actual bytes transferred from the Normal TRB
+ */
+ if (trb_comp_code != COMP_STOP_INVAL)
+ td->urb->actual_length +=
+ TRB_LEN(cur_trb->generic.field[2]) -
+ TRB_LEN(event->transfer_len);
+ }
+
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
/*
* If this function returns an error condition, it means it got a Transfer
* event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
@@ -1584,109 +1695,12 @@ static int handle_tx_event(struct xhci_hcd *xhci,
}
/* Now update the urb's actual_length and give back to the core */
/* Was this a control transfer? */
- if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
+ if (usb_endpoint_xfer_control(&td->urb->ep->desc))
ret = process_ctrl_td(xhci, td, event_trb, event, ep,
&status);
- goto cleanup;
- } else {
- switch (trb_comp_code) {
- case COMP_SUCCESS:
- /* Double check that the HW transferred everything. */
- if (event_trb != td->last_trb) {
- xhci_warn(xhci, "WARN Successful completion "
- "on short TX\n");
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- } else {
- if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
- xhci_dbg(xhci, "Successful bulk "
- "transfer!\n");
- else
- xhci_dbg(xhci, "Successful interrupt "
- "transfer!\n");
- status = 0;
- }
- break;
- case COMP_SHORT_TX:
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- break;
- default:
- /* Others already handled above */
- break;
- }
- dev_dbg(&td->urb->dev->dev,
- "ep %#x - asked for %d bytes, "
- "%d bytes untransferred\n",
- td->urb->ep->desc.bEndpointAddress,
- td->urb->transfer_buffer_length,
- TRB_LEN(event->transfer_len));
- /* Fast path - was this the last TRB in the TD for this URB? */
- if (event_trb == td->last_trb) {
- if (TRB_LEN(event->transfer_len) != 0) {
- td->urb->actual_length =
- td->urb->transfer_buffer_length -
- TRB_LEN(event->transfer_len);
- if (td->urb->transfer_buffer_length <
- td->urb->actual_length) {
- xhci_warn(xhci, "HC gave bad length "
- "of %d bytes left\n",
- TRB_LEN(event->transfer_len));
- td->urb->actual_length = 0;
- if (td->urb->transfer_flags &
- URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- }
- /* Don't overwrite a previously set error code */
- if (status == -EINPROGRESS) {
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
- }
- } else {
- td->urb->actual_length = td->urb->transfer_buffer_length;
- /* Ignore a short packet completion if the
- * untransferred length was zero.
- */
- if (status == -EREMOTEIO)
- status = 0;
- }
- } else {
- /* Slow path - walk the list, starting from the dequeue
- * pointer, to get the actual length transferred.
- */
- union xhci_trb *cur_trb;
- struct xhci_segment *cur_seg;
-
- td->urb->actual_length = 0;
- for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
- cur_trb != event_trb;
- next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
- if ((cur_trb->generic.field[3] &
- TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
- (cur_trb->generic.field[3] &
- TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
- td->urb->actual_length +=
- TRB_LEN(cur_trb->generic.field[2]);
- }
- /* If the ring didn't stop on a Link or No-op TRB, add
- * in the actual bytes transferred from the Normal TRB
- */
- if (trb_comp_code != COMP_STOP_INVAL)
- td->urb->actual_length +=
- TRB_LEN(cur_trb->generic.field[2]) -
- TRB_LEN(event->transfer_len);
- }
- }
-
- ret = finish_td(xhci, td, event_trb, event, ep, &status, false);
+ else
+ ret = process_bulk_intr_td(xhci, td, event_trb, event, ep,
+ &status);
cleanup:
inc_deq(xhci, xhci->event_ring, true);
--
GitLab
From 7fec3253edeb62ab7fc1a82d246196e72e9afdac Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:15 -0700
Subject: [PATCH 806/863] USB: xHCI: remove redundant print messages
Remove redundant print messages in the interrupt context.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 83580cf794d16..44730eca5fd99 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1592,7 +1592,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
u32 trb_comp_code;
int ret = 0;
- xhci_dbg(xhci, "In %s\n", __func__);
slot_id = TRB_TO_SLOT_ID(event->flags);
xdev = xhci->devs[slot_id];
if (!xdev) {
@@ -1614,7 +1613,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
event_dma = event->buffer;
/* This TRB should be in the TD at the head of this ring's TD list */
- xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
if (list_empty(&ep_ring->td_list)) {
xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
TRB_TO_SLOT_ID(event->flags), ep_index);
@@ -1623,30 +1621,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
goto cleanup;
}
- xhci_dbg(xhci, "%s - getting list entry\n", __func__);
td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
/* Is this a TRB in the currently executing TD? */
- xhci_dbg(xhci, "%s - looking for TD\n", __func__);
event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
td->last_trb, event_dma);
- xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
if (!event_seg) {
/* HC is busted, give up! */
xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
return -ESHUTDOWN;
}
event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
- xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
- (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
- xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
- lower_32_bits(event->buffer));
- xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
- upper_32_bits(event->buffer));
- xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
- (unsigned int) event->transfer_len);
- xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
- (unsigned int) event->flags);
/* Look for common error cases */
trb_comp_code = GET_COMP_CODE(event->transfer_len);
--
GitLab
From 986a92d44810cad915279fdc942e2fd2c2857499 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:20 -0700
Subject: [PATCH 807/863] USB: xHCI: adds new cases to trb_comp_code switch
This patch adds new cases to trb_comp_code switch, and moves
the switch judgment ahead of fetching td.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 76 ++++++++++++++++++++++++------------
1 file changed, 52 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 44730eca5fd99..5bb12fed9d2d4 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1605,36 +1605,16 @@ static int handle_tx_event(struct xhci_hcd *xhci,
ep = &xdev->eps[ep_index];
ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
- if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+ if (!ep_ring ||
+ (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
"or incorrect stream ring\n");
return -ENODEV;
}
event_dma = event->buffer;
- /* This TRB should be in the TD at the head of this ring's TD list */
- if (list_empty(&ep_ring->td_list)) {
- xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
- TRB_TO_SLOT_ID(event->flags), ep_index);
- xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
- (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
- xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
- goto cleanup;
- }
- td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
-
- /* Is this a TRB in the currently executing TD? */
- event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
- td->last_trb, event_dma);
- if (!event_seg) {
- /* HC is busted, give up! */
- xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
- return -ESHUTDOWN;
- }
- event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
-
- /* Look for common error cases */
trb_comp_code = GET_COMP_CODE(event->transfer_len);
+ /* Look for common error cases */
switch (trb_comp_code) {
/* Skip codes that require special handling depending on
* transfer type
@@ -1670,14 +1650,62 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
status = -ENOSR;
break;
+ case COMP_BW_OVER:
+ xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n");
+ break;
+ case COMP_BUFF_OVER:
+ xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n");
+ break;
+ case COMP_UNDERRUN:
+ /*
+ * When the Isoch ring is empty, the xHC will generate
+ * a Ring Overrun Event for IN Isoch endpoint or Ring
+ * Underrun Event for OUT Isoch endpoint.
+ */
+ xhci_dbg(xhci, "underrun event on endpoint\n");
+ if (!list_empty(&ep_ring->td_list))
+ xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
+ "still with TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ goto cleanup;
+ case COMP_OVERRUN:
+ xhci_dbg(xhci, "overrun event on endpoint\n");
+ if (!list_empty(&ep_ring->td_list))
+ xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
+ "still with TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ goto cleanup;
default:
if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
status = 0;
break;
}
- xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n");
+ xhci_warn(xhci, "ERROR Unknown event condition, HC probably "
+ "busted\n");
+ goto cleanup;
+ }
+
+ /* This TRB should be in the TD at the head of this ring's TD list */
+ if (list_empty(&ep_ring->td_list)) {
+ xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+ xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
goto cleanup;
}
+ td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+
+ /* Is this a TRB in the currently executing TD? */
+ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
+ td->last_trb, event_dma);
+ if (!event_seg) {
+ /* HC is busted, give up! */
+ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
+ return -ESHUTDOWN;
+ }
+ event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
+
/* Now update the urb's actual_length and give back to the core */
/* Was this a control transfer? */
if (usb_endpoint_xfer_control(&td->urb->ep->desc))
--
GitLab
From d18240db797ed749b511b8dc910c5dcf08be46d6 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:25 -0700
Subject: [PATCH 808/863] USB: xHCI: Missed Service Error Event process
This patch adds mechanism to process Missed Service Error Event.
Sometimes the xHC is unable to process the isoc TDs in time, it will
generate Missed Service Error Event. In this case some TDs on the ring are
not processed and missed. When encounter a Missed Servce Error Event, set
the skip flag of the ep, and process the missed TDs until reach the next
processed TD, then clear the skip flag.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-mem.c | 1 +
drivers/usb/host/xhci-ring.c | 158 ++++++++++++++++++++++++-----------
drivers/usb/host/xhci.h | 8 ++
3 files changed, 117 insertions(+), 50 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 6d8f7e32932a8..64d036804715b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1124,6 +1124,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
virt_dev->num_rings_cached--;
xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring);
}
+ virt_dev->eps[ep_index].skip = false;
ep_ring = virt_dev->eps[ep_index].new_ring;
ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 5bb12fed9d2d4..4c3501003b8ee 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1675,6 +1675,16 @@ static int handle_tx_event(struct xhci_hcd *xhci,
"still with TDs queued?\n",
TRB_TO_SLOT_ID(event->flags), ep_index);
goto cleanup;
+ case COMP_MISSED_INT:
+ /*
+ * When encounter missed service error, one or more isoc tds
+ * may be missed by xHC.
+ * Set skip flag of the ep_ring; Complete the missed tds as
+ * short transfer when process the ep_ring next time.
+ */
+ ep->skip = true;
+ xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
+ goto cleanup;
default:
if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
status = 0;
@@ -1685,60 +1695,108 @@ static int handle_tx_event(struct xhci_hcd *xhci,
goto cleanup;
}
- /* This TRB should be in the TD at the head of this ring's TD list */
- if (list_empty(&ep_ring->td_list)) {
- xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
- TRB_TO_SLOT_ID(event->flags), ep_index);
- xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
- (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
- xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
- goto cleanup;
- }
- td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
-
- /* Is this a TRB in the currently executing TD? */
- event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
- td->last_trb, event_dma);
- if (!event_seg) {
- /* HC is busted, give up! */
- xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
- return -ESHUTDOWN;
- }
- event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
+ do {
+ /* This TRB should be in the TD at the head of this ring's
+ * TD list.
+ */
+ if (list_empty(&ep_ring->td_list)) {
+ xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
+ "with no TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+ xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ if (ep->skip) {
+ ep->skip = false;
+ xhci_dbg(xhci, "td_list is empty while skip "
+ "flag set. Clear skip flag.\n");
+ }
+ ret = 0;
+ goto cleanup;
+ }
- /* Now update the urb's actual_length and give back to the core */
- /* Was this a control transfer? */
- if (usb_endpoint_xfer_control(&td->urb->ep->desc))
- ret = process_ctrl_td(xhci, td, event_trb, event, ep,
- &status);
- else
- ret = process_bulk_intr_td(xhci, td, event_trb, event, ep,
- &status);
+ td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+ /* Is this a TRB in the currently executing TD? */
+ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
+ td->last_trb, event_dma);
+ if (event_seg && ep->skip) {
+ xhci_dbg(xhci, "Found td. Clear skip flag.\n");
+ ep->skip = false;
+ }
+ if (!event_seg &&
+ (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) {
+ /* HC is busted, give up! */
+ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not "
+ "part of current TD\n");
+ return -ESHUTDOWN;
+ }
-cleanup:
- inc_deq(xhci, xhci->event_ring, true);
- xhci_set_hc_event_deq(xhci);
+ if (event_seg) {
+ event_trb = &event_seg->trbs[(event_dma -
+ event_seg->dma) / sizeof(*event_trb)];
+ /*
+ * No-op TRB should not trigger interrupts.
+ * If event_trb is a no-op TRB, it means the
+ * corresponding TD has been cancelled. Just ignore
+ * the TD.
+ */
+ if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_TR_NOOP)) {
+ xhci_dbg(xhci, "event_trb is a no-op TRB. "
+ "Skip it\n");
+ goto cleanup;
+ }
+ }
- /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
- if (ret) {
- urb = td->urb;
- /* Leave the TD around for the reset endpoint function to use
- * (but only if it's not a control endpoint, since we already
- * queued the Set TR dequeue pointer command for stalled
- * control endpoints).
+ /* Now update the urb's actual_length and give back to
+ * the core
*/
- if (usb_endpoint_xfer_control(&urb->ep->desc) ||
- (trb_comp_code != COMP_STALL &&
- trb_comp_code != COMP_BABBLE))
- kfree(td);
-
- usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
- xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
- urb, urb->actual_length, status);
- spin_unlock(&xhci->lock);
- usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
- spin_lock(&xhci->lock);
- }
+ if (usb_endpoint_xfer_control(&td->urb->ep->desc))
+ ret = process_ctrl_td(xhci, td, event_trb, event, ep,
+ &status);
+ else
+ ret = process_bulk_intr_td(xhci, td, event_trb, event,
+ ep, &status);
+
+cleanup:
+ /*
+ * Do not update event ring dequeue pointer if ep->skip is set.
+ * Will roll back to continue process missed tds.
+ */
+ if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
+ inc_deq(xhci, xhci->event_ring, true);
+ xhci_set_hc_event_deq(xhci);
+ }
+
+ if (ret) {
+ urb = td->urb;
+ /* Leave the TD around for the reset endpoint function
+ * to use(but only if it's not a control endpoint,
+ * since we already queued the Set TR dequeue pointer
+ * command for stalled control endpoints).
+ */
+ if (usb_endpoint_xfer_control(&urb->ep->desc) ||
+ (trb_comp_code != COMP_STALL &&
+ trb_comp_code != COMP_BABBLE))
+ kfree(td);
+
+ usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+ xhci_dbg(xhci, "Giveback URB %p, len = %d, "
+ "status = %d\n",
+ urb, urb->actual_length, status);
+ spin_unlock(&xhci->lock);
+ usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
+ spin_lock(&xhci->lock);
+ }
+
+ /*
+ * If ep->skip is set, it means there are missed tds on the
+ * endpoint ring need to take care of.
+ * Process them as short transfer until reach the td pointed by
+ * the event.
+ */
+ } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
+
return 0;
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 5bc03d1c2beb2..f4dfb26a65aae 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -720,6 +720,14 @@ struct xhci_virt_ep {
struct timer_list stop_cmd_timer;
int stop_cmds_pending;
struct xhci_hcd *xhci;
+ /*
+ * Sometimes the xHC can not process isochronous endpoint ring quickly
+ * enough, and it will miss some isoc tds on the ring and generate
+ * a Missed Service Error Event.
+ * Set skip flag when receive a Missed Service Error Event and
+ * process the missed tds on the endpoint ring.
+ */
+ bool skip;
};
struct xhci_virt_device {
--
GitLab
From 8e51adccd4c4b9ffcd509d7f2afce0a906139f75 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:31 -0700
Subject: [PATCH 809/863] USB: xHCI: Introduce urb_priv structure
Add urb_priv data structure to xHCI driver. This structure allows multiple
xhci TDs to be linked to one urb, which is essential for isochronous
transfer. For non-isochronous urb, only one TD is needed for one urb;
for isochronous urb, the TD number for the urb is equal to
urb->number_of_packets.
The length field of urb_priv indicates the number of TDs in the urb.
The td_cnt field indicates the number of TDs already processed by xHC.
When td_cnt matches length, the urb can be given back to usbcore.
When an urb is dequeued or cancelled, add all the unprocessed TDs to the
endpoint's cancelled_td_list. When process a cancelled TD, increase
td_cnt field. When td_cnt equals urb_priv->length, giveback the
cancelled urb.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-mem.c | 16 +++++++
drivers/usb/host/xhci-ring.c | 91 +++++++++++++++++++++++++-----------
drivers/usb/host/xhci.c | 45 +++++++++++++++---
drivers/usb/host/xhci.h | 7 +++
4 files changed, 125 insertions(+), 34 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 64d036804715b..44eeaa016f1b8 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1390,6 +1390,22 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
return command;
}
+void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv)
+{
+ int last;
+
+ if (!urb_priv)
+ return;
+
+ last = urb_priv->length - 1;
+ if (last >= 0) {
+ int i;
+ for (i = 0; i <= last; i++)
+ kfree(urb_priv->td[i]);
+ }
+ kfree(urb_priv);
+}
+
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command)
{
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 4c3501003b8ee..fa8c935591332 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -578,16 +578,24 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
struct xhci_td *cur_td, int status, char *adjective)
{
struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct urb *urb;
+ struct urb_priv *urb_priv;
- cur_td->urb->hcpriv = NULL;
- usb_hcd_unlink_urb_from_ep(hcd, cur_td->urb);
- xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, cur_td->urb);
+ urb = cur_td->urb;
+ urb_priv = urb->hcpriv;
+ urb_priv->td_cnt++;
- spin_unlock(&xhci->lock);
- usb_hcd_giveback_urb(hcd, cur_td->urb, status);
- kfree(cur_td);
- spin_lock(&xhci->lock);
- xhci_dbg(xhci, "%s URB given back\n", adjective);
+ /* Only giveback urb when this is the last td in urb */
+ if (urb_priv->td_cnt == urb_priv->length) {
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb);
+
+ spin_unlock(&xhci->lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ xhci_urb_free_priv(xhci, urb_priv);
+ spin_lock(&xhci->lock);
+ xhci_dbg(xhci, "%s URB given back\n", adjective);
+ }
}
/*
@@ -1272,6 +1280,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
struct urb *urb = NULL;
struct xhci_ep_ctx *ep_ctx;
int ret = 0;
+ struct urb_priv *urb_priv;
u32 trb_comp_code;
slot_id = TRB_TO_SLOT_ID(event->flags);
@@ -1325,6 +1334,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
td_cleanup:
/* Clean up the endpoint's TD list */
urb = td->urb;
+ urb_priv = urb->hcpriv;
/* Do one last check of the actual transfer length.
* If the host controller said we transferred more data than
@@ -1349,7 +1359,10 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
if (!list_empty(&td->cancelled_td_list))
list_del(&td->cancelled_td_list);
- ret = 1;
+ urb_priv->td_cnt++;
+ /* Giveback the urb when all the tds are completed */
+ if (urb_priv->td_cnt == urb_priv->length)
+ ret = 1;
}
return ret;
@@ -1588,6 +1601,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
union xhci_trb *event_trb;
struct urb *urb = NULL;
int status = -EINPROGRESS;
+ struct urb_priv *urb_priv;
struct xhci_ep_ctx *ep_ctx;
u32 trb_comp_code;
int ret = 0;
@@ -1770,6 +1784,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (ret) {
urb = td->urb;
+ urb_priv = urb->hcpriv;
/* Leave the TD around for the reset endpoint function
* to use(but only if it's not a control endpoint,
* since we already queued the Set TR dequeue pointer
@@ -1778,7 +1793,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (usb_endpoint_xfer_control(&urb->ep->desc) ||
(trb_comp_code != COMP_STALL &&
trb_comp_code != COMP_BABBLE))
- kfree(td);
+ xhci_urb_free_priv(xhci, urb_priv);
usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
xhci_dbg(xhci, "Giveback URB %p, len = %d, "
@@ -1979,10 +1994,12 @@ static int prepare_transfer(struct xhci_hcd *xhci,
unsigned int stream_id,
unsigned int num_trbs,
struct urb *urb,
- struct xhci_td **td,
+ unsigned int td_index,
gfp_t mem_flags)
{
int ret;
+ struct urb_priv *urb_priv;
+ struct xhci_td *td;
struct xhci_ring *ep_ring;
struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
@@ -1998,24 +2015,29 @@ static int prepare_transfer(struct xhci_hcd *xhci,
num_trbs, mem_flags);
if (ret)
return ret;
- *td = kzalloc(sizeof(struct xhci_td), mem_flags);
- if (!*td)
- return -ENOMEM;
- INIT_LIST_HEAD(&(*td)->td_list);
- INIT_LIST_HEAD(&(*td)->cancelled_td_list);
- ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
- if (unlikely(ret)) {
- kfree(*td);
- return ret;
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[td_index];
+
+ INIT_LIST_HEAD(&td->td_list);
+ INIT_LIST_HEAD(&td->cancelled_td_list);
+
+ if (td_index == 0) {
+ ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
+ if (unlikely(ret)) {
+ xhci_urb_free_priv(xhci, urb_priv);
+ urb->hcpriv = NULL;
+ return ret;
+ }
}
- (*td)->urb = urb;
- urb->hcpriv = (void *) (*td);
+ td->urb = urb;
/* Add this TD to the tail of the endpoint ring's TD list */
- list_add_tail(&(*td)->td_list, &ep_ring->td_list);
- (*td)->start_seg = ep_ring->enq_seg;
- (*td)->first_trb = ep_ring->enqueue;
+ list_add_tail(&td->td_list, &ep_ring->td_list);
+ td->start_seg = ep_ring->enq_seg;
+ td->first_trb = ep_ring->enqueue;
+
+ urb_priv->td[td_index] = td;
return 0;
}
@@ -2154,6 +2176,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
{
struct xhci_ring *ep_ring;
unsigned int num_trbs;
+ struct urb_priv *urb_priv;
struct xhci_td *td;
struct scatterlist *sg;
int num_sgs;
@@ -2174,9 +2197,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
- num_trbs, urb, &td, mem_flags);
+ num_trbs, urb, 0, mem_flags);
if (trb_buff_len < 0)
return trb_buff_len;
+
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[0];
+
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
@@ -2297,6 +2324,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
{
struct xhci_ring *ep_ring;
+ struct urb_priv *urb_priv;
struct xhci_td *td;
int num_trbs;
struct xhci_generic_trb *start_trb;
@@ -2342,10 +2370,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
- num_trbs, urb, &td, mem_flags);
+ num_trbs, urb, 0, mem_flags);
if (ret < 0)
return ret;
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[0];
+
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
@@ -2431,6 +2462,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct xhci_generic_trb *start_trb;
int start_cycle;
u32 field, length_field;
+ struct urb_priv *urb_priv;
struct xhci_td *td;
ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
@@ -2458,10 +2490,13 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
num_trbs++;
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
- num_trbs, urb, &td, mem_flags);
+ num_trbs, urb, 0, mem_flags);
if (ret < 0)
return ret;
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[0];
+
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3106d22ae053f..295a0a2063a6e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -804,7 +804,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
unsigned long flags;
int ret = 0;
unsigned int slot_id, ep_index;
-
+ struct urb_priv *urb_priv;
+ int size, i;
if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
return -EINVAL;
@@ -824,6 +825,30 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
ret = -ESHUTDOWN;
goto exit;
}
+
+ if (usb_endpoint_xfer_isoc(&urb->ep->desc))
+ size = urb->number_of_packets;
+ else
+ size = 1;
+
+ urb_priv = kzalloc(sizeof(struct urb_priv) +
+ size * sizeof(struct xhci_td *), mem_flags);
+ if (!urb_priv)
+ return -ENOMEM;
+
+ for (i = 0; i < size; i++) {
+ urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags);
+ if (!urb_priv->td[i]) {
+ urb_priv->length = i;
+ xhci_urb_free_priv(xhci, urb_priv);
+ return -ENOMEM;
+ }
+ }
+
+ urb_priv->length = size;
+ urb_priv->td_cnt = 0;
+ urb->hcpriv = urb_priv;
+
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
/* Check to see if the max packet size for the default control
* endpoint changed during FS device enumeration
@@ -877,6 +902,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
exit:
return ret;
dying:
+ xhci_urb_free_priv(xhci, urb_priv);
+ urb->hcpriv = NULL;
xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for "
"non-responsive xHCI host.\n",
urb->ep->desc.bEndpointAddress, urb);
@@ -918,9 +945,10 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
unsigned long flags;
- int ret;
+ int ret, i;
u32 temp;
struct xhci_hcd *xhci;
+ struct urb_priv *urb_priv;
struct xhci_td *td;
unsigned int ep_index;
struct xhci_ring *ep_ring;
@@ -935,12 +963,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
temp = xhci_readl(xhci, &xhci->op_regs->status);
if (temp == 0xffffffff) {
xhci_dbg(xhci, "HW died, freeing TD.\n");
- td = (struct xhci_td *) urb->hcpriv;
+ urb_priv = urb->hcpriv;
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&xhci->lock, flags);
usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN);
- kfree(td);
+ xhci_urb_free_priv(xhci, urb_priv);
return ret;
}
if (xhci->xhc_state & XHCI_STATE_DYING) {
@@ -968,9 +996,14 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
xhci_dbg(xhci, "Endpoint ring:\n");
xhci_debug_ring(xhci, ep_ring);
- td = (struct xhci_td *) urb->hcpriv;
- list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+ urb_priv = urb->hcpriv;
+
+ for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
+ td = urb_priv->td[i];
+ list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+ }
+
/* Queue a stop endpoint command, but only if this is
* the first cancellation to be handled.
*/
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f4dfb26a65aae..ebf62082950bb 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1090,6 +1090,12 @@ struct xhci_scratchpad {
dma_addr_t *sp_dma_buffers;
};
+struct urb_priv {
+ int length;
+ int td_cnt;
+ struct xhci_td *td[0];
+};
+
/*
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
@@ -1347,6 +1353,7 @@ struct xhci_ring *xhci_stream_id_to_ring(
struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
bool allocate_in_ctx, bool allocate_completion,
gfp_t mem_flags);
+void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
--
GitLab
From 04e51901dd44f40a5a385ced897f6bca87d5f40a Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:39 -0700
Subject: [PATCH 810/863] USB: xHCI: Isochronous transfer implementation
This patch implements isochronous urb enqueue and interrupt handler part.
When an isochronous urb is passed to xHCI driver, first check the transfer
ring to guarantee there is enough room for the whole urb. Then update the
start_frame and interval field of the urb. Always assume URB_ISO_ASAP
is set, and never use urb->start_frame as input.
The number of isoc TDs is equal to urb->number_of_packets. One isoc TD is
consumed every Interval. Each isoc TD consists of an Isoch TRB chained to
zero or more Normal TRBs.
Call prepare_transfer for each TD to do initialization; then calculate the
number of TRBs needed for each TD. If the data required by an isoc TD is
physically contiguous (not crosses a page boundary), then only one isoc TRB
is needed; otherwise one or more additional normal TRB shall be chained to
the isoc TRB by the host.
Set TRB_IOC to the last TRB of each isoc TD. Do not ring endpoint doorbell
to start xHC procession until all the TDs are inserted to the endpoint
transer ring.
In irq handler, update urb status and actual_length, increase
urb_priv->td_cnt. When all the TDs are completed(td_cnt is equal to
urb_priv->length), giveback the urb to usbcore.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 319 +++++++++++++++++++++++++++++++++++
drivers/usb/host/xhci.h | 5 +
2 files changed, 324 insertions(+)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fa8c935591332..da3519e76e2bb 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1471,6 +1471,104 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
return finish_td(xhci, td, event_trb, event, ep, status, false);
}
+/*
+ * Process isochronous tds, update urb packet status and actual_length.
+ */
+static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ union xhci_trb *event_trb, struct xhci_transfer_event *event,
+ struct xhci_virt_ep *ep, int *status)
+{
+ struct xhci_ring *ep_ring;
+ struct urb_priv *urb_priv;
+ int idx;
+ int len = 0;
+ int skip_td = 0;
+ union xhci_trb *cur_trb;
+ struct xhci_segment *cur_seg;
+ u32 trb_comp_code;
+
+ ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+ urb_priv = td->urb->hcpriv;
+ idx = urb_priv->td_cnt;
+
+ if (ep->skip) {
+ /* The transfer is partly done */
+ *status = -EXDEV;
+ td->urb->iso_frame_desc[idx].status = -EXDEV;
+ } else {
+ /* handle completion code */
+ switch (trb_comp_code) {
+ case COMP_SUCCESS:
+ td->urb->iso_frame_desc[idx].status = 0;
+ xhci_dbg(xhci, "Successful isoc transfer!\n");
+ break;
+ case COMP_SHORT_TX:
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ td->urb->iso_frame_desc[idx].status =
+ -EREMOTEIO;
+ else
+ td->urb->iso_frame_desc[idx].status = 0;
+ break;
+ case COMP_BW_OVER:
+ td->urb->iso_frame_desc[idx].status = -ECOMM;
+ skip_td = 1;
+ break;
+ case COMP_BUFF_OVER:
+ case COMP_BABBLE:
+ td->urb->iso_frame_desc[idx].status = -EOVERFLOW;
+ skip_td = 1;
+ break;
+ case COMP_STALL:
+ td->urb->iso_frame_desc[idx].status = -EPROTO;
+ skip_td = 1;
+ break;
+ case COMP_STOP:
+ case COMP_STOP_INVAL:
+ break;
+ default:
+ td->urb->iso_frame_desc[idx].status = -1;
+ break;
+ }
+ }
+
+ /* calc actual length */
+ if (ep->skip) {
+ td->urb->iso_frame_desc[idx].actual_length = 0;
+ return finish_td(xhci, td, event_trb, event, ep, status, true);
+ }
+
+ if (trb_comp_code == COMP_SUCCESS || skip_td == 1) {
+ td->urb->iso_frame_desc[idx].actual_length =
+ td->urb->iso_frame_desc[idx].length;
+ td->urb->actual_length +=
+ td->urb->iso_frame_desc[idx].length;
+ } else {
+ for (cur_trb = ep_ring->dequeue,
+ cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
+ next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+ if ((cur_trb->generic.field[3] &
+ TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
+ (cur_trb->generic.field[3] &
+ TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
+ len +=
+ TRB_LEN(cur_trb->generic.field[2]);
+ }
+ len += TRB_LEN(cur_trb->generic.field[2]) -
+ TRB_LEN(event->transfer_len);
+
+ if (trb_comp_code != COMP_STOP_INVAL) {
+ td->urb->iso_frame_desc[idx].actual_length = len;
+ td->urb->actual_length += len;
+ }
+ }
+
+ if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS)
+ *status = 0;
+
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
+}
+
/*
* Process bulk and interrupt tds, update urb status and actual_length.
*/
@@ -1768,6 +1866,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (usb_endpoint_xfer_control(&td->urb->ep->desc))
ret = process_ctrl_td(xhci, td, event_trb, event, ep,
&status);
+ else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
+ ret = process_isoc_td(xhci, td, event_trb, event, ep,
+ &status);
else
ret = process_bulk_intr_td(xhci, td, event_trb, event,
ep, &status);
@@ -2553,6 +2654,224 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
return 0;
}
+static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
+ struct urb *urb, int i)
+{
+ int num_trbs = 0;
+ u64 addr, td_len, running_total;
+
+ addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
+ td_len = urb->iso_frame_desc[i].length;
+
+ running_total = TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ if (running_total != 0)
+ num_trbs++;
+
+ while (running_total < td_len) {
+ num_trbs++;
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+
+ return num_trbs;
+}
+
+/* This is for isoc transfer */
+static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ struct urb_priv *urb_priv;
+ struct xhci_td *td;
+ int num_tds, trbs_per_td;
+ struct xhci_generic_trb *start_trb;
+ bool first_trb;
+ int start_cycle;
+ u32 field, length_field;
+ int running_total, trb_buff_len, td_len, td_remain_len, ret;
+ u64 start_addr, addr;
+ int i, j;
+
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+
+ num_tds = urb->number_of_packets;
+ if (num_tds < 1) {
+ xhci_dbg(xhci, "Isoc URB with zero packets?\n");
+ return -EINVAL;
+ }
+
+ if (!in_interrupt())
+ dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d),"
+ " addr = %#llx, num_tds = %d\n",
+ urb->ep->desc.bEndpointAddress,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer_length,
+ (unsigned long long)urb->transfer_dma,
+ num_tds);
+
+ start_addr = (u64) urb->transfer_dma;
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ /* Queue the first TRB, even if it's zero-length */
+ for (i = 0; i < num_tds; i++) {
+ first_trb = true;
+
+ running_total = 0;
+ addr = start_addr + urb->iso_frame_desc[i].offset;
+ td_len = urb->iso_frame_desc[i].length;
+ td_remain_len = td_len;
+
+ trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
+
+ ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+ urb->stream_id, trbs_per_td, urb, i, mem_flags);
+ if (ret < 0)
+ return ret;
+
+ urb_priv = urb->hcpriv;
+ td = urb_priv->td[i];
+
+ for (j = 0; j < trbs_per_td; j++) {
+ u32 remainder = 0;
+ field = 0;
+
+ if (first_trb) {
+ /* Queue the isoc TRB */
+ field |= TRB_TYPE(TRB_ISOC);
+ /* Assume URB_ISO_ASAP is set */
+ field |= TRB_SIA;
+ if (i > 0)
+ field |= ep_ring->cycle_state;
+ first_trb = false;
+ } else {
+ /* Queue other normal TRBs */
+ field |= TRB_TYPE(TRB_NORMAL);
+ field |= ep_ring->cycle_state;
+ }
+
+ /* Chain all the TRBs together; clear the chain bit in
+ * the last TRB to indicate it's the last TRB in the
+ * chain.
+ */
+ if (j < trbs_per_td - 1) {
+ field |= TRB_CHAIN;
+ } else {
+ td->last_trb = ep_ring->enqueue;
+ field |= TRB_IOC;
+ }
+
+ /* Calculate TRB length */
+ trb_buff_len = TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ if (trb_buff_len > td_remain_len)
+ trb_buff_len = td_remain_len;
+
+ remainder = xhci_td_remainder(td_len - running_total);
+ length_field = TRB_LEN(trb_buff_len) |
+ remainder |
+ TRB_INTR_TARGET(0);
+ queue_trb(xhci, ep_ring, false, false,
+ lower_32_bits(addr),
+ upper_32_bits(addr),
+ length_field,
+ /* We always want to know if the TRB was short,
+ * or we won't get an event when it completes.
+ * (Unless we use event data TRBs, which are a
+ * waste of space and HC resources.)
+ */
+ field | TRB_ISP);
+ running_total += trb_buff_len;
+
+ addr += trb_buff_len;
+ td_remain_len -= trb_buff_len;
+ }
+
+ /* Check TD length */
+ if (running_total != td_len) {
+ xhci_err(xhci, "ISOC TD length unmatch\n");
+ return -EINVAL;
+ }
+ }
+
+ wmb();
+ start_trb->field[3] |= start_cycle;
+
+ ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id);
+ return 0;
+}
+
+/*
+ * Check transfer ring to guarantee there is enough room for the urb.
+ * Update ISO URB start_frame and interval.
+ * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
+ * update the urb->start_frame by now.
+ * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
+ */
+int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_virt_device *xdev;
+ struct xhci_ring *ep_ring;
+ struct xhci_ep_ctx *ep_ctx;
+ int start_frame;
+ int xhci_interval;
+ int ep_interval;
+ int num_tds, num_trbs, i;
+ int ret;
+
+ xdev = xhci->devs[slot_id];
+ ep_ring = xdev->eps[ep_index].ring;
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+
+ num_trbs = 0;
+ num_tds = urb->number_of_packets;
+ for (i = 0; i < num_tds; i++)
+ num_trbs += count_isoc_trbs_needed(xhci, urb, i);
+
+ /* Check the ring to guarantee there is enough room for the whole urb.
+ * Do not insert any td of the urb to the ring if the check failed.
+ */
+ ret = prepare_ring(xhci, ep_ring, ep_ctx->ep_info & EP_STATE_MASK,
+ num_trbs, mem_flags);
+ if (ret)
+ return ret;
+
+ start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
+ start_frame &= 0x3fff;
+
+ urb->start_frame = start_frame;
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ urb->start_frame >>= 3;
+
+ xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
+ ep_interval = urb->interval;
+ /* Convert to microframes */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ ep_interval *= 8;
+ /* FIXME change this to a warning and a suggestion to use the new API
+ * to set the polling interval (once the API is added).
+ */
+ if (xhci_interval != ep_interval) {
+ if (!printk_ratelimit())
+ dev_dbg(&urb->dev->dev, "Driver uses different interval"
+ " (%d microframe%s) than xHCI "
+ "(%d microframe%s)\n",
+ ep_interval,
+ ep_interval == 1 ? "" : "s",
+ xhci_interval,
+ xhci_interval == 1 ? "" : "s");
+ urb->interval = xhci_interval;
+ /* Convert back to frames for LS/FS devices */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ urb->interval /= 8;
+ }
+ return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+}
+
/**** Command Ring Operations ****/
/* Generic function for queueing a command TRB on the command ring.
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ebf62082950bb..e1383d91468be 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -919,6 +919,9 @@ struct xhci_event_cmd {
/* Control transfer TRB specific fields */
#define TRB_DIR_IN (1<<16)
+/* Isochronous TRB specific fields */
+#define TRB_SIA (1<<31)
+
struct xhci_generic_trb {
u32 field[4];
};
@@ -1416,6 +1419,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
+int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index);
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id, bool command_must_succeed);
int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
--
GitLab
From a061a5a0b816de3b4711a2e96764bb3cd8df861e Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:47 -0700
Subject: [PATCH 811/863] USB: xHCI: allocate bigger ring for isochronous
endpoint
Isochronous endpoint needs a bigger size of transfer ring. Isochronous URB
consists of multiple packets, each packet needs a isoc td to carry, and
there will be multiple trbs inserted to the ring at one time. One segment
is too small for isochronous endpoints, and it will result in
room_on_ring() check failure and the URB is failed to enqueue.
Allocate bigger ring for isochronous endpoint. 8 segments should be enough.
This will be replaced with dynamic ring expansion in the future.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-mem.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 44eeaa016f1b8..7d60d1f4debb3 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1112,8 +1112,18 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
/* Set up the endpoint ring */
- virt_dev->eps[ep_index].new_ring =
- xhci_ring_alloc(xhci, 1, true, mem_flags);
+ /*
+ * Isochronous endpoint ring needs bigger size because one isoc URB
+ * carries multiple packets and it will insert multiple tds to the
+ * ring.
+ * This should be replaced with dynamic ring resizing in the future.
+ */
+ if (usb_endpoint_xfer_isoc(&ep->desc))
+ virt_dev->eps[ep_index].new_ring =
+ xhci_ring_alloc(xhci, 8, true, mem_flags);
+ else
+ virt_dev->eps[ep_index].new_ring =
+ xhci_ring_alloc(xhci, 1, true, mem_flags);
if (!virt_dev->eps[ep_index].new_ring) {
/* Attempt to use the ring cache */
if (virt_dev->num_rings_cached == 0)
--
GitLab
From 787f4e5adaabba01becd646818dbace2d7e6b386 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 22 Jul 2010 15:23:52 -0700
Subject: [PATCH 812/863] USB: xHCI: Isoc urb enqueue
Enable isochronous urb enqueue.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 295a0a2063a6e..89ac48534099b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -897,7 +897,12 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
slot_id, ep_index);
spin_unlock_irqrestore(&xhci->lock, flags);
} else {
- ret = -EINVAL;
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ goto dying;
+ ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ spin_unlock_irqrestore(&xhci->lock, flags);
}
exit:
return ret;
--
GitLab
From 8156d158efa6370a8183f47327f122edbb4f2cb6 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andy.shevchenko@gmail.com>
Date: Thu, 22 Jul 2010 11:58:47 +0300
Subject: [PATCH 813/863] usb: gadget: storage: strict coversion of 'ro'
parameter
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Bring a strict way to get the 'ro' parameter from the user.
The patch followed by this one adds another boolean parameter. To be consistent
Michał Nazarewicz proposed to use simple_strtol() in both cases (correspondend
discussion in LKML [1]). Due to simple_strtol() doesn't return error in a good
way and we have a boolean parameter the strict_strtoul() is used.
[1] http://lkml.org/lkml/2010/7/14/169
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/storage_common.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index a10faecfabcd9..3bbddab72e571 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -748,9 +748,9 @@ static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr,
ssize_t rc = count;
struct fsg_lun *curlun = fsg_lun_from_dev(dev);
struct rw_semaphore *filesem = dev_get_drvdata(dev);
- int i;
+ unsigned long ro;
- if (sscanf(buf, "%d", &i) != 1)
+ if (strict_strtoul(buf, 2, &ro))
return -EINVAL;
/*
@@ -762,8 +762,8 @@ static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr,
LDBG(curlun, "read-only status change prevented\n");
rc = -EBUSY;
} else {
- curlun->ro = !!i;
- curlun->initially_ro = !!i;
+ curlun->ro = ro;
+ curlun->initially_ro = ro;
LDBG(curlun, "read-only status set to %d\n", curlun->ro);
}
up_read(filesem);
--
GitLab
From a93917d39fc388c4761d2530af82513e2d3bf9f6 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andy.shevchenko@gmail.com>
Date: Thu, 22 Jul 2010 17:53:56 +0300
Subject: [PATCH 814/863] USB: gadget: storage: optional SCSI WRITE FUA bit
MS Windows mounts removable storage in "Removal optimized mode" by
default. All the writes to the media are synchronous which is achieved
by setting FUA (Force Unit Access) bit in SCSI WRITE(10,12) commands.
This prevents I/O requests aggregation in block layer dramatically
decreasing performance.
This patch brings an option to accept or ignore mentioned bit
a) via specifying module parameter "nofua", or
b) through sysfs entry
/sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua
(_UDC_ is the name of the USB Device Controller driver)
Patch is based on the work that was done by Denis Karpov for Maemo 5
platform.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
.../sysfs-devices-platform-_UDC_-gadget | 12 +++++++
drivers/usb/gadget/file_storage.c | 31 ++++++++++++++-----
drivers/usb/gadget/storage_common.c | 28 +++++++++++++++++
3 files changed, 64 insertions(+), 7 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
index 34034027b13c6..d548eaac230a4 100644
--- a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
+++ b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
@@ -7,3 +7,15 @@ Description:
0 -> resumed
(_UDC_ is the name of the USB Device Controller driver)
+
+What: /sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua
+Date: July 2010
+Contact: Andy Shevchenko <andy.shevchenko@gmail.com>
+Description:
+ Show or set the reaction on the FUA (Force Unit Access) bit in
+ the SCSI WRITE(10,12) commands when a gadget in USB Mass
+ Storage mode.
+
+ Possible values are:
+ 1 -> ignore the FUA flag
+ 0 -> obey the FUA flag
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index d57c09f764d6e..88e5ad2bc7106 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -93,6 +93,8 @@
* removable Default false, boolean for removable media
* luns=N Default N = number of filenames, number of
* LUNs to support
+ * nofua=b[,b...] Default false, booleans for ignore FUA flag
+ * in SCSI WRITE(10,12) commands
* stall Default determined according to the type of
* USB device controller (usually true),
* boolean to permit the driver to halt
@@ -112,12 +114,12 @@
* PAGE_CACHE_SIZE)
*
* If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "ro",
- * "removable", "luns", "stall", and "cdrom" options are available; default
- * values are used for everything else.
+ * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
+ * default values are used for everything else.
*
* The pathnames of the backing files and the ro settings are available in
- * the attribute files "file" and "ro" in the lun<n> subdirectory of the
- * gadget's sysfs directory. If the "removable" option is set, writing to
+ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
+ * the gadget's sysfs directory. If the "removable" option is set, writing to
* these files will simulate ejecting/loading the medium (writing an empty
* line means eject) and adjusting a write-enable tab. Changes to the ro
* setting are not allowed when the medium is loaded or if CD-ROM emulation
@@ -304,8 +306,10 @@ MODULE_LICENSE("Dual BSD/GPL");
static struct {
char *file[FSG_MAX_LUNS];
int ro[FSG_MAX_LUNS];
+ int nofua[FSG_MAX_LUNS];
unsigned int num_filenames;
unsigned int num_ros;
+ unsigned int num_nofuas;
unsigned int nluns;
int removable;
@@ -345,6 +349,10 @@ MODULE_PARM_DESC(file, "names of backing files or devices");
module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
MODULE_PARM_DESC(ro, "true to force read-only");
+module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
+ S_IRUGO);
+MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
+
module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
MODULE_PARM_DESC(luns, "number of LUNs");
@@ -1279,7 +1287,8 @@ static int do_write(struct fsg_dev *fsg)
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
return -EINVAL;
}
- if (fsg->cmnd[1] & 0x08) { // FUA
+ /* FUA */
+ if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
spin_lock(&curlun->filp->f_lock);
curlun->filp->f_flags |= O_DSYNC;
spin_unlock(&curlun->filp->f_lock);
@@ -3133,6 +3142,7 @@ static int fsg_main_thread(void *fsg_)
/* The write permissions and store_xxx pointers are set in fsg_bind() */
static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
+static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
@@ -3362,6 +3372,10 @@ static int __ref fsg_bind(struct usb_gadget *gadget)
}
}
+ /* Only for removable media? */
+ dev_attr_nofua.attr.mode = 0644;
+ dev_attr_nofua.store = fsg_store_nofua;
+
/* Find out how many LUNs there should be */
i = mod_data.nluns;
if (i == 0)
@@ -3387,6 +3401,7 @@ static int __ref fsg_bind(struct usb_gadget *gadget)
curlun->ro = mod_data.cdrom || mod_data.ro[i];
curlun->initially_ro = curlun->ro;
curlun->removable = mod_data.removable;
+ curlun->nofua = mod_data.nofua[i];
curlun->dev.release = lun_release;
curlun->dev.parent = &gadget->dev;
curlun->dev.driver = &fsg_driver.driver;
@@ -3400,6 +3415,8 @@ static int __ref fsg_bind(struct usb_gadget *gadget)
}
if ((rc = device_create_file(&curlun->dev,
&dev_attr_ro)) != 0 ||
+ (rc = device_create_file(&curlun->dev,
+ &dev_attr_nofua)) != 0 ||
(rc = device_create_file(&curlun->dev,
&dev_attr_file)) != 0) {
device_unregister(&curlun->dev);
@@ -3525,8 +3542,8 @@ static int __ref fsg_bind(struct usb_gadget *gadget)
if (IS_ERR(p))
p = NULL;
}
- LINFO(curlun, "ro=%d, file: %s\n",
- curlun->ro, (p ? p : "(error)"));
+ LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
+ curlun->ro, curlun->nofua, (p ? p : "(error)"));
}
}
kfree(pathbuf);
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 3bbddab72e571..484acfb1a7c5a 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -284,6 +284,7 @@ struct fsg_lun {
unsigned int prevent_medium_removal:1;
unsigned int registered:1;
unsigned int info_valid:1;
+ unsigned int nofua:1;
u32 sense_data;
u32 sense_data_info;
@@ -714,6 +715,14 @@ static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr,
: curlun->initially_ro);
}
+static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fsg_lun *curlun = fsg_lun_from_dev(dev);
+
+ return sprintf(buf, "%u\n", curlun->nofua);
+}
+
static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -770,6 +779,25 @@ static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr,
return rc;
}
+static ssize_t fsg_store_nofua(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fsg_lun *curlun = fsg_lun_from_dev(dev);
+ unsigned long nofua;
+
+ if (strict_strtoul(buf, 2, &nofua))
+ return -EINVAL;
+
+ /* Sync data when switching from async mode to sync */
+ if (!nofua && curlun->nofua)
+ fsg_lun_fsync_sub(curlun);
+
+ curlun->nofua = nofua;
+
+ return count;
+}
+
static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
--
GitLab
From 76be932af17ddebac1b4e3dd2565a0519eaa29ce Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Fri, 16 Jul 2010 20:15:06 +0400
Subject: [PATCH 815/863] usb: host: sl811-hcd: check kzalloc() result
If kzalloc() fails exit with -ENOMEM.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/sl811-hcd.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index bcf9f0e809ded..990f06b89eaad 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -813,8 +813,11 @@ static int sl811h_urb_enqueue(
#endif
/* avoid all allocations within spinlocks */
- if (!hep->hcpriv)
+ if (!hep->hcpriv) {
ep = kzalloc(sizeof *ep, mem_flags);
+ if (ep == NULL)
+ return -ENOMEM;
+ }
spin_lock_irqsave(&sl811->lock, flags);
--
GitLab
From 6d091ee761992f804a1dcd411836ad0abb71be10 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:40 +0100
Subject: [PATCH 816/863] USB: s3c-hsotg: Increase TX fifo limit
Up the FIFO size for the TX to 1024 entries, as this now seems to work
with all the cores. This fixes a problem when using large packets on
a core with MPS set to 512 can hang due to insufficient space for the
writes.
The hang arises due to getting the non-periodic FIFO empty IRQ but
not being able to satisfy any requests since there is never enough
space to write 512 bytes into the buffer. This means we end up with
a stream of interrupt requests.
It is easier to up the TX FIFO to fill the space we left for it
than to try and fix the positions in the code where we should have
limited the max-packet size to < TXFIFOSIZE, since the TXFIFOSIZE
depends on how the TX FIFOs have been setup.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 26193eceb3231..81f62da26f36a 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -310,11 +310,11 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
hsotg->regs + S3C_GNPTXFSIZ);
*/
- /* set FIFO sizes to 2048/0x1C0 */
+ /* set FIFO sizes to 2048/1024 */
writel(2048, hsotg->regs + S3C_GRXFSIZ);
writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
- S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+ S3C_GNPTXFSIZ_NPTxFDep(1024),
hsotg->regs + S3C_GNPTXFSIZ);
/* arange all the rest of the TX FIFOs, as some versions of this
--
GitLab
From 679f9b7c7c7d3c746792138e9d7d76578ef52c41 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:41 +0100
Subject: [PATCH 817/863] USB: s3c-hsotg: The NPTX/PTX FIFO sizes are in words,
not bytes
Fix a problem where we have been underestimating the space available in
the IN PTX/NPTX FIFOs by assuming that they where simply word aligned
instead of in number-of-words. This means all length calculations need
to be multiplied-by-4.
Note, we do not change the information about fifo size or start addresses
available to userspace as we assume the user can multiply by four easily
and is already knows these values are in words.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 81f62da26f36a..4a251458c61d0 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -505,6 +505,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
}
can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
+ can_write *= 4; /* fifo size is in 32bit quantities. */
}
dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
@@ -2732,7 +2733,7 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
*/
ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
- hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo);
+ hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4;
/* if we're using dma, we need to set the next-endpoint pointer
* to be something valid.
--
GitLab
From e7a9ff54271bf0ddbf641e5a0bde3ebda35808be Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:42 +0100
Subject: [PATCH 818/863] USB: s3c-hsotg: Avoid overwriting contents of perodic
in 'fifo'
In shared fifo mode (used on older SoCs) the periodic in fifo beahves
much more like a packet buffer, discarding old data when writing new
data. Avoid this by ensuring that we do not load new transactions in
when there is data sitting already in the FIFO.
Note, this may not be an observed bug, we are fixing the case that this
may happen.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 4a251458c61d0..354fd456f8cc7 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -91,7 +91,9 @@ struct s3c_hsotg_req;
* For periodic IN endpoints, we have fifo_size and fifo_load to try
* and keep track of the amount of data in the periodic FIFO for each
* of these as we don't have a status register that tells us how much
- * is in each of them.
+ * is in each of them. (note, this may actually be useless information
+ * as in shared-fifo mode periodic in acts like a single-frame packet
+ * buffer than a fifo)
*/
struct s3c_hsotg_ep {
struct usb_ep ep;
@@ -474,6 +476,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+ /* if shared fifo, we cannot write anything until the
+ * previous data has been completely sent.
+ */
+ if (hs_ep->fifo_load != 0) {
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+ return -ENOSPC;
+ }
+
dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
__func__, size_left,
hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
--
GitLab
From b3864cedfb576e11d2f9274f14a24840d8b569c3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:43 +0100
Subject: [PATCH 819/863] USB: s3c-hsotg: Re-initialise all FIFOs on USB bus
reset
The USB documentation suggest that the FIFOs should be reset when a
bus reset event happens. Use the s3c_hsotg_init_fifo() to ensure that
the FIFO layout is correct and that the FIFOs are flushed before
acknowledging the reset.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 354fd456f8cc7..9d32c9ff737d9 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2082,17 +2082,12 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
/* it seems after a reset we can end up with a situation
- * where the TXFIFO still has data in it... try flushing
- * it to remove anything that may still be in it.
+ * where the TXFIFO still has data in it... the docs
+ * suggest resetting all the fifos, so use the init_fifo
+ * code to relayout and flush the fifos.
*/
- if (1) {
- writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh,
- hsotg->regs + S3C_GRSTCTL);
-
- dev_info(hsotg->dev, "GNPTXSTS=%08x\n",
- readl(hsotg->regs + S3C_GNPTXSTS));
- }
+ s3c_hsotg_init_fifo(hsotg);
s3c_hsotg_enqueue_setup(hsotg);
--
GitLab
From 10aebc772a10c95e30dff0779cb0f879b8f1554f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:44 +0100
Subject: [PATCH 820/863] USB: s3c-hsotg: Add initial detection and setup for
dedicated FIFO mode
Add support for the dedicated FIFO mode on newer SoCs such as the S5PV210
partly to improve support and to fix the bug where any non-EP0 IN endpoint
requires its own FIFO allocation.
To fix this, we ensure that any non-zero IN endpoint is given a TXFIFO
using the same allocation method as the periodic case (all our current
hardware has enough FIFOs and FIFO memory for a 1:1 mapping) and ensure
that the necessary transmission done interrupt is enabled.
The default settings from reset for the core point all EPs at FIFO0,
used for the control endpoint. However, the controller documentation
states that all IN endpoints _must_ have a unique FIFO to avoid any
contention during transmission.
Note, this leaves us with a large IN FIFO for EP0 (which re-uses the
old NPTXFIFO) for an endpoint which cannot shift more than a pair of
packets at a time... this is a waste, but it looks like we cannot
re-allocate space to the individual IN FIFOs as they are already
maxed out (to be confirmed).
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
.../include/plat/regs-usb-hsotg.h | 2 +
drivers/usb/gadget/s3c-hsotg.c | 40 ++++++++++++++++++-
2 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
index 8d18d9d4d148b..dc90f5ede88f8 100644
--- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
@@ -226,6 +226,7 @@
#define S3C_DIEPMSK S3C_HSOTG_REG(0x810)
+#define S3C_DIEPMSK_TxFIFOEmpty (1 << 7)
#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6)
#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5)
#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4)
@@ -371,6 +372,7 @@
#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
+#define S3C_DTXFSTS(_a) S3C_HSOTG_REG(0x918 + ((_a) * 0x20))
#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 9d32c9ff737d9..4196e376a346d 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
+#define DEBUG
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
@@ -130,6 +132,7 @@ struct s3c_hsotg_ep {
* @regs: The memory area mapped for accessing registers.
* @regs_res: The resource that was allocated when claiming register space.
* @irq: The IRQ number we are using
+ * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
* @debug_root: root directrory for debugfs.
* @debug_file: main status file for debugfs.
* @debug_fifo: FIFO status file for debugfs.
@@ -148,6 +151,8 @@ struct s3c_hsotg {
struct resource *regs_res;
int irq;
+ unsigned int dedicated_fifos:1;
+
struct dentry *debug_root;
struct dentry *debug_file;
struct dentry *debug_fifo;
@@ -466,7 +471,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
if (to_write == 0)
return 0;
- if (periodic) {
+ if (periodic && !hsotg->dedicated_fifos) {
u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
int size_left;
int size_done;
@@ -504,6 +509,11 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
return -ENOSPC;
}
+ } else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
+ can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index));
+
+ can_write &= 0xffff;
+ can_write *= 4;
} else {
if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
dev_dbg(hsotg->dev,
@@ -1829,6 +1839,15 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
__func__, idx);
clear |= S3C_DIEPMSK_INTknEPMisMsk;
}
+
+ /* FIFO has space or is empty (see GAHBCFG) */
+ if (hsotg->dedicated_fifos &&
+ ints & S3C_DIEPMSK_TxFIFOEmpty) {
+ dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
+ __func__, idx);
+ s3c_hsotg_trytx(hsotg, hs_ep);
+ clear |= S3C_DIEPMSK_TxFIFOEmpty;
+ }
}
writel(clear, hsotg->regs + epint_reg);
@@ -2280,6 +2299,12 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
break;
}
+ /* if the hardware has dedicated fifos, we must give each IN EP
+ * a unique tx-fifo even if it is non-periodic.
+ */
+ if (dir_in && hsotg->dedicated_fifos)
+ epctrl |= S3C_DxEPCTL_TxFNum(index);
+
/* for non control endpoints, set PID to D0 */
if (index)
epctrl |= S3C_DxEPCTL_SetD0PID;
@@ -2569,7 +2594,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
S3C_DIEPMSK_INTknEPMisMsk |
- S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+ S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk |
+ ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0),
hsotg->regs + S3C_DIEPMSK);
/* don't need XferCompl, we get that from RXFIFO in slave mode. In
@@ -2778,6 +2804,8 @@ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
{
+ u32 cfg4;
+
/* unmask subset of endpoint interrupts */
writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
@@ -2813,6 +2841,14 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
hsotg->regs + S3C_GAHBCFG);
+
+ /* check hardware configuration */
+
+ cfg4 = readl(hsotg->regs + 0x50);
+ hsotg->dedicated_fifos = (cfg4 >> 25) & 1;
+
+ dev_info(hsotg->dev, "%s fifos\n",
+ hsotg->dedicated_fifos ? "dedicated" : "shared");
}
static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
--
GitLab
From 03e10e5ab5ba6511ddaf80085cf08c62e9336fa5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:45 +0100
Subject: [PATCH 821/863] USB: s3c-hsotg: Only load packet per fifo write
Limit the IN FIFO write to a single packet per attempt at writing,
as per the specifications and ensure that we don't return fifo-full
so that we can continue writing packets if we have the space.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 4196e376a346d..df6a39d6270f0 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -538,6 +538,17 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
if (can_write > 512)
can_write = 512;
+ /* limit the write to one max-packet size worth of data, but allow
+ * the transfer to return that it did not run out of fifo space
+ * doing it. */
+ if (to_write > hs_ep->ep.maxpacket) {
+ to_write = hs_ep->ep.maxpacket;
+
+ s3c_hsotg_en_gsint(hsotg,
+ periodic ? S3C_GINTSTS_PTxFEmp :
+ S3C_GINTSTS_NPTxFEmp);
+ }
+
/* see if we can write data */
if (to_write > can_write) {
--
GitLab
From c9a64ea884b8b40d70077ffe1e93081f2190f072 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:46 +0100
Subject: [PATCH 822/863] USB: s3c-hsotg: Check for new request before enqueing
new setup
Before trying a new setup transaction after getting an EP0 in complete
interrupt, check that the driver did not try and send more EP0 IN data
before enqueing a new setup transaction.
This fixes a bug where we cannot send all of the IN data in one go
so split the transfer, but then fail to send all the data as we start
waiting for a new OUT transaction
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index df6a39d6270f0..10aeee145eeab 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1790,7 +1790,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
if (dir_in) {
s3c_hsotg_complete_in(hsotg, hs_ep);
- if (idx == 0)
+ if (idx == 0 && !hs_ep->req)
s3c_hsotg_enqueue_setup(hsotg);
} else if (using_dma(hsotg)) {
/* We're using DMA, we need to fire an OutDone here
--
GitLab
From 6cd68de741d5b05482cab369978663fdf78c407c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:47 +0100
Subject: [PATCH 823/863] USB: s3c-hsotg: Fix max EP0 IN request length
The maximum length for any EP0 IN request on EP0 is 127 bytes, not 128
as the driver currently has it.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 10aeee145eeab..1020006ecfc1e 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -612,8 +612,7 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
} else {
if (hs_ep->dir_in) {
- /* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */
- maxsize = 64+64+1;
+ maxsize = 64+64;
maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
} else {
maxsize = 0x3f;
--
GitLab
From b05ca580c39314c8527e2e1c36a823970cc01683 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:48 +0100
Subject: [PATCH 824/863] USB: s3c-hsotg: Fix the OUT EP0 limit
The EP0 out limit is the same as the IN limit, so make them the same.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 1020006ecfc1e..552ec899500ac 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -611,11 +611,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
} else {
+ maxsize = 64+64;
if (hs_ep->dir_in) {
- maxsize = 64+64;
maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
} else {
- maxsize = 0x3f;
maxpkt = 2;
}
}
--
GitLab
From a33e7136e9652374f7d54ded3cff8062d8e1e84f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 19 Jul 2010 09:40:49 +0100
Subject: [PATCH 825/863] USB: s3c-hsotg: Fix OUT packet request retry
If there is more data in the request than we could fit into a single
hardware request, then check when the OutDone event is received if
we have more data, and if so, schedule the new data instead of trying
to complete the request (and in the case of EP0, sending a 0 packet
in the middle of a transfer).
Also, move the debug message about the current transfer state before
the warning about a bad transfer.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 552ec899500ac..825b6ca62941b 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1383,6 +1383,9 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
read_ptr = hs_req->req.actual;
max_req = hs_req->req.length - read_ptr;
+ dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
+ __func__, to_read, max_req, read_ptr, hs_req->req.length);
+
if (to_read > max_req) {
/* more data appeared than we where willing
* to deal with in this request.
@@ -1392,9 +1395,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
WARN_ON_ONCE(1);
}
- dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
- __func__, to_read, max_req, read_ptr, hs_req->req.length);
-
hs_ep->total_data += to_read;
hs_req->req.actual += to_read;
to_read = DIV_ROUND_UP(to_read, 4);
@@ -1463,9 +1463,11 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
int epnum, bool was_setup)
{
+ u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
struct s3c_hsotg_req *hs_req = hs_ep->req;
struct usb_request *req = &hs_req->req;
+ unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
int result = 0;
if (!hs_req) {
@@ -1474,9 +1476,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
}
if (using_dma(hsotg)) {
- u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
unsigned size_done;
- unsigned size_left;
/* Calculate the size of the transfer by checking how much
* is left in the endpoint size register and then working it
@@ -1486,14 +1486,18 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
* so may overshoot/undershoot the transfer.
*/
- size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
-
size_done = hs_ep->size_loaded - size_left;
size_done += hs_ep->last_load;
req->actual = size_done;
}
+ /* if there is more request to do, schedule new transfer */
+ if (req->actual < req->length && size_left == 0) {
+ s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+ return;
+ }
+
if (req->actual < req->length && req->short_not_ok) {
dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
__func__, req->actual, req->length);
--
GitLab
From e50bf385bfadeaacfb8af07b9b78dcfdef339981 Mon Sep 17 00:00:00 2001
From: Maurus Cuelenaere <mcuelenaere@gmail.com>
Date: Mon, 19 Jul 2010 09:40:50 +0100
Subject: [PATCH 826/863] USB: s3c-hsotg: Add support for external USB clock
The PLL that drives the USB clock supports 3 input clocks: 12, 24 and 48Mhz.
This patch adds support to the USB driver for setting the correct register bit
according to the given clock.
This depends on the following patch:
[PATCH] ARM: S3C64XX: Add USB external clock definition
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 825b6ca62941b..a4e0b0fa01913 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -25,6 +25,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
@@ -2798,6 +2799,7 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
*/
static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
{
+ struct clk *xusbxti;
u32 osc;
writel(0, S3C_PHYPWR);
@@ -2805,6 +2807,23 @@ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
+ xusbxti = clk_get(hsotg->dev, "xusbxti");
+ if (xusbxti && !IS_ERR(xusbxti)) {
+ switch (clk_get_rate(xusbxti)) {
+ case 12*MHZ:
+ osc |= S3C_PHYCLK_CLKSEL_12M;
+ break;
+ case 24*MHZ:
+ osc |= S3C_PHYCLK_CLKSEL_24M;
+ break;
+ default:
+ case 48*MHZ:
+ /* default reference clock */
+ break;
+ }
+ clk_put(xusbxti);
+ }
+
writel(osc | 0x10, S3C_PHYCLK);
/* issue a full set of resets to the otg and core */
--
GitLab
From 4d47166c975382f5e95086e8a88d4a39d27b34b5 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Mon, 19 Jul 2010 16:01:40 +0200
Subject: [PATCH 827/863] USB: s3c-hsotg: fix compilation problem
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
drivers/usb/gadget/s3c-hsotg.c: In function ‘s3c_hsotg_otgreset’:
drivers/usb/gadget/s3c-hsotg.c:2816: error: ‘MHZ’ undeclared (first use in this function)
drivers/usb/gadget/s3c-hsotg.c:2816: error: (Each undeclared identifier is reported only once
drivers/usb/gadget/s3c-hsotg.c:2816: error: for each function it appears in.)
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index a4e0b0fa01913..ce272b4d79c4a 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -36,6 +36,7 @@
#include <plat/regs-usb-hsotg.h>
#include <mach/regs-sys.h>
#include <plat/udc-hs.h>
+#include <plat/cpu.h>
#define DMA_ADDR_INVALID (~((dma_addr_t)0))
--
GitLab
From 1eb838d3e2a473acbb9b21278e75b79640fb2c7b Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Mon, 19 Jul 2010 16:01:41 +0200
Subject: [PATCH 828/863] USB: s3c-hsotg: modify only selected bits in
S3C_PHYPWR register
S5PV210 SoCs has 2 USB PHY interfaces, both enabled by writing zero to
S3C_PHYPWR register. HS/OTG driver uses only PHY0, so do not touch bits
related to PHY1.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ce272b4d79c4a..258ca01ac6794 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2801,9 +2801,11 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
{
struct clk *xusbxti;
- u32 osc;
+ u32 pwr, osc;
- writel(0, S3C_PHYPWR);
+ pwr = readl(S3C_PHYPWR);
+ pwr &= ~0x19;
+ writel(pwr, S3C_PHYPWR);
mdelay(1);
osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
--
GitLab
From 31ee04de7e670de4199572595cce4aaa7f7f6351 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Mon, 19 Jul 2010 16:01:42 +0200
Subject: [PATCH 829/863] USB: s3c-hsotg: add support for clock gating
This patch adds support for clock gating of the HS/OTG block. On S5PV210
otg gating clock is initally disabled so the driver needs to get and
enable it before it can access its registers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 258ca01ac6794..521ebed0118d0 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -152,6 +152,7 @@ struct s3c_hsotg {
void __iomem *regs;
struct resource *regs_res;
int irq;
+ struct clk *clk;
unsigned int dedicated_fifos:1;
@@ -3258,13 +3259,20 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
hsotg->dev = dev;
hsotg->plat = plat;
+ hsotg->clk = clk_get(&pdev->dev, "otg");
+ if (IS_ERR(hsotg->clk)) {
+ dev_err(dev, "cannot get otg clock\n");
+ ret = -EINVAL;
+ goto err_mem;
+ }
+
platform_set_drvdata(pdev, hsotg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "cannot find register resource 0\n");
ret = -EINVAL;
- goto err_mem;
+ goto err_clk;
}
hsotg->regs_res = request_mem_region(res->start, resource_size(res),
@@ -3272,7 +3280,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
if (!hsotg->regs_res) {
dev_err(dev, "cannot reserve registers\n");
ret = -ENOENT;
- goto err_mem;
+ goto err_clk;
}
hsotg->regs = ioremap(res->start, resource_size(res));
@@ -3325,6 +3333,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
/* reset the system */
+ clk_enable(hsotg->clk);
+
s3c_hsotg_gate(pdev, true);
s3c_hsotg_otgreset(hsotg);
@@ -3348,7 +3358,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
err_regs_res:
release_resource(hsotg->regs_res);
kfree(hsotg->regs_res);
-
+err_clk:
+ clk_put(hsotg->clk);
err_mem:
kfree(hsotg);
return ret;
@@ -3370,6 +3381,9 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
s3c_hsotg_gate(pdev, false);
+ clk_disable(hsotg->clk);
+ clk_put(hsotg->clk);
+
kfree(hsotg);
return 0;
}
--
GitLab
From afad19648f70c6493193e0a774bd754b7790b4a0 Mon Sep 17 00:00:00 2001
From: "John G. Rogers" <jgrogers@gmail.com>
Date: Sat, 24 Jul 2010 09:50:52 -0400
Subject: [PATCH 830/863] USB: serial: enabling support for Segway RMP in
ftdi_sio
I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will
enable support for the Segway Robotic Mobility Platform (RMP200) in the
ftdi_sio kernel module. Currently, users of the Segway RMP200 must use
a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a
udev rule to get the ftdi_sio module to handle the usb interface and
mount it on /dev/ttyXXX. This is not a good solution because some users
will have multiple USB to Serial converters which will use the ftdi_sio
module.
Signed-off-by: John Rogers <jgrogers@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e298dc4baed77..a3671dbcdd49d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -746,6 +746,7 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index d01946db8fac2..74f094273f79a 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1032,3 +1032,8 @@
#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2
#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID 0xe729
--
GitLab
From 9a4b7c3b14905a191da09980b9da966be5fc7fa2 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Mon, 26 Jul 2010 12:26:22 +0400
Subject: [PATCH 831/863] usb: imx21-hcd: set task state with
schedule_timeout_uninterruptible()
imx21_hc_reset() uses schedule_timeout() without setting state to
STATE_(UN)INTERRUPTIBLE. As it is called in cycle without checking of
pending signals, use schedule_timeout_uninterruptible().
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/imx21-hcd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index ca0e98d8e1f4a..3e5630369c316 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1521,7 +1521,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd)
return -ETIMEDOUT;
}
spin_unlock_irq(&imx21->lock);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
spin_lock_irq(&imx21->lock);
}
spin_unlock_irqrestore(&imx21->lock, flags);
--
GitLab
From 567064916e4fe32af81b89e473a1e4f40c64b27b Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date: Thu, 22 Jul 2010 14:16:37 +0200
Subject: [PATCH 832/863] USB: gadget: file_storage: serial parameter even if
not test mode
Moved the serial parameter handling code out of "#ifdef
CONFIG_USB_FILE_STORAGE_TEST".
This modifies Yann Cantin's commit "USB: Add a serial number
parameter to g_file_storage" module as per Alan Stern's request.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Anand Gadiyar <gadiyar@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Yann Cantin <yann.cantin@laposte.net>
---
drivers/usb/gadget/file_storage.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 88e5ad2bc7106..a857b7ac238c6 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -321,7 +321,7 @@ static struct {
unsigned short vendor;
unsigned short product;
unsigned short release;
- char *serial_parm;
+ char *serial;
unsigned int buflen;
int transport_type;
@@ -365,6 +365,8 @@ MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
+module_param_named(serial, mod_data.serial, charp, S_IRUGO);
+MODULE_PARM_DESC(serial, "USB serial number");
/* In the non-TEST version, only the module parameters listed above
* are available. */
@@ -386,9 +388,6 @@ MODULE_PARM_DESC(product, "USB Product ID");
module_param_named(release, mod_data.release, ushort, S_IRUGO);
MODULE_PARM_DESC(release, "USB release number");
-module_param_named(serial, mod_data.serial_parm, charp, S_IRUGO);
-MODULE_PARM_DESC(serial, "USB serial number");
-
module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
MODULE_PARM_DESC(buflen, "I/O buffer size");
@@ -3291,10 +3290,12 @@ static int __init check_parameters(struct fsg_dev *fsg)
return -ETOOSMALL;
}
+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
+
/* Serial string handling.
* On a real device, the serial string would be loaded
* from permanent storage. */
- if (mod_data.serial_parm) {
+ if (mod_data.serial) {
const char *ch;
unsigned len = 0;
@@ -3303,7 +3304,7 @@ static int __init check_parameters(struct fsg_dev *fsg)
* 12 uppercase hexadecimal characters.
* BBB need at least 12 uppercase hexadecimal characters,
* with a maximum of 126. */
- for (ch = mod_data.serial_parm; *ch; ++ch) {
+ for (ch = mod_data.serial; *ch; ++ch) {
++len;
if ((*ch < '0' || *ch > '9') &&
(*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
@@ -3322,8 +3323,11 @@ static int __init check_parameters(struct fsg_dev *fsg)
"Failing back to default\n");
goto fill_serial;
}
- fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial_parm;
+ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
} else {
+ WARNING(fsg,
+ "Userspace failed to provide serial number; "
+ "Failing back to default\n");
fill_serial:
/* Serial number not specified or invalid, make our own.
* We just encode it from the driver version string,
@@ -3339,8 +3343,6 @@ static int __init check_parameters(struct fsg_dev *fsg)
}
}
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
return 0;
}
--
GitLab
From 0372a754be9aa43e19fd86c9bc04796d43b55e38 Mon Sep 17 00:00:00 2001
From: Andrew Bird <ajb@spheresystems.co.uk>
Date: Fri, 23 Jul 2010 16:04:41 +0100
Subject: [PATCH 833/863] USB: option: add huawei k3765 k4505 devices to work
properly
This patch adds the product IDs of Huawei's K3765 and K4505 mobile
broadband usb modems to option.c. It also adds a quirk to the option
probe function so that binding to the device's network interface(class
0xff) is avoided. This is necessary to allow another driver to bind to
that, and to avoid programs like wvdial opening a nonfunctioning tty
during modem discovery.
Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/option.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 051c00ce5d2a2..9fc6ea2c681fa 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -145,6 +145,8 @@ static void option_instat_callback(struct urb *urb);
#define HUAWEI_PRODUCT_E143D 0x143D
#define HUAWEI_PRODUCT_E143E 0x143E
#define HUAWEI_PRODUCT_E143F 0x143F
+#define HUAWEI_PRODUCT_K4505 0x1464
+#define HUAWEI_PRODUCT_K3765 0x1465
#define HUAWEI_PRODUCT_E14AC 0x14AC
#define HUAWEI_PRODUCT_ETS1220 0x1803
@@ -480,6 +482,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
@@ -1015,6 +1019,13 @@ static int option_probe(struct usb_serial *serial,
serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
return -ENODEV;
+ /* Don't bind network interfaces on Huawei K3765 & K4505 */
+ if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
+ (serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
+ serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) &&
+ serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+ return -ENODEV;
+
data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
if (!data)
--
GitLab
From c4e0b508bcdd1af6b1b3c317042336936173591f Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 27 Jul 2010 11:28:42 -0400
Subject: [PATCH 834/863] USB: accept RNDIS configs if there's no alternative
This patch (as1410) makes a slight change to the strategy used for
choosing a default configuration. Currently we skip configs whose
first interface is RNDIS, if the kernel wasn't built with the
corresponding driver. This risks losing access to the other
interfaces in those configs. In addition, if there is only one config
then we will end up not configuring the device at all.
This changes the logic; now such configurations will be skipped only
if there is at least one other config.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Adam Kropelin <akropel1@rochester.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/generic.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 9a34ccb0a1c02..69ecd3c923112 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -105,8 +105,10 @@ int usb_choose_configuration(struct usb_device *udev)
/* When the first config's first interface is one of Microsoft's
* pet nonstandard Ethernet-over-USB protocols, ignore it unless
* this kernel has enabled the necessary host side driver.
+ * But: Don't ignore it if it's the only config.
*/
- if (i == 0 && desc && (is_rndis(desc) || is_activesync(desc))) {
+ if (i == 0 && num_configs > 1 && desc &&
+ (is_rndis(desc) || is_activesync(desc))) {
#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
continue;
#else
--
GitLab
From b6180ef7c99574c3350bbffa2a3a9d675321543d Mon Sep 17 00:00:00 2001
From: "dranch@trinnet.net" <dranch@trinnet.net>
Date: Mon, 26 Jul 2010 19:44:33 -0700
Subject: [PATCH 835/863] USB: ftdi_sio: device id for Navitator
This patch is to add a US Interface, Inc. "Navigator" USB device.
Specifically, it's a HAM Radio USB sound modem that also
incorporates three pairs of unique FTDI serial ports. The standard
Linux FTDI serial driver will only recognize the first two serial
ports of an unknown FDTI derived device and this patch adds in
recognition to these specific new IDs.
Signed-off-by: David A. Ranch <dranch@trinnet.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/ftdi_sio.c | 3 +++
drivers/usb/serial/ftdi_sio_ids.h | 5 +++++
2 files changed, 8 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index a3671dbcdd49d..eb12d9b096b4f 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -157,6 +157,9 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 74f094273f79a..6e612c52e763a 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -40,6 +40,11 @@
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+/* US Interface Navigator (http://www.usinterface.com/) */
+#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
+#define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */
+#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */
+
/* OOCDlink by Joern Kaipf <joernk@web.de>
* (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
--
GitLab
From 356c5a4834a74c621715f7a7f16ded914eecbd3c Mon Sep 17 00:00:00 2001
From: Alessio Igor Bogani <abogani@texware.it>
Date: Tue, 27 Jul 2010 23:05:14 +0200
Subject: [PATCH 836/863] USB: cp210x: Add four new device IDs
Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/cp210x.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8b8c7976b4c00..2bef4415c19c6 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -126,6 +126,10 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
+ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
+ { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
+ { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
{ } /* Terminating Entry */
};
--
GitLab
From f2402f21caba2aceebbf637458b777300669020f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed, 28 Jul 2010 22:11:35 +0200
Subject: [PATCH 837/863] USB: Add USB 2.0 to ssb ohci driver
This adds USB 2.0 support to ssb ohci driver.
This patch was used in OpenWRT for a long time now.
CC: Steve Brown <sbrown@cortland.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ohci-ssb.c | 52 ++++++++++++++++++++++++++++++++++---
1 file changed, 49 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index 23fd6a886bddb..48ee6943bf35a 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -93,8 +93,11 @@ static void ssb_ohci_detach(struct ssb_device *dev)
{
struct usb_hcd *hcd = ssb_get_drvdata(dev);
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
ssb_device_disable(dev, 0);
}
@@ -106,10 +109,52 @@ static int ssb_ohci_attach(struct ssb_device *dev)
int err = -ENOMEM;
u32 tmp, flags = 0;
- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
- ssb_device_enable(dev, flags);
+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+ /* Put the device into host-mode. */
+ flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+ ssb_device_enable(dev, flags);
+ } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+ /*
+ * USB 2.0 special considerations:
+ *
+ * In addition to the standard SSB reset sequence, the Host
+ * Control Register must be programmed to bring the USB core
+ * and various phy components out of reset.
+ */
+ ssb_device_enable(dev, 0);
+ ssb_write32(dev, 0x200, 0x7ff);
+
+ /* Change Flush control reg */
+ tmp = ssb_read32(dev, 0x400);
+ tmp &= ~8;
+ ssb_write32(dev, 0x400, tmp);
+ tmp = ssb_read32(dev, 0x400);
+
+ /* Change Shim control reg */
+ tmp = ssb_read32(dev, 0x304);
+ tmp &= ~0x100;
+ ssb_write32(dev, 0x304, tmp);
+ tmp = ssb_read32(dev, 0x304);
+
+ udelay(1);
+
+ /* Work around for 5354 failures */
+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+ /* Change syn01 reg */
+ tmp = 0x00fe00fe;
+ ssb_write32(dev, 0x894, tmp);
+
+ /* Change syn03 reg */
+ tmp = ssb_read32(dev, 0x89c);
+ tmp |= 0x1;
+ ssb_write32(dev, 0x89c, tmp);
+ }
+ } else
+ ssb_device_enable(dev, 0);
hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
dev_name(dev->dev));
@@ -200,6 +245,7 @@ static int ssb_ohci_resume(struct ssb_device *dev)
static const struct ssb_device_id ssb_ohci_table[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
SSB_DEVTABLE_END
};
MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
--
GitLab
From 185c9bcfde628f1d71aefd34517252cce4c4a57a Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Wed, 28 Jul 2010 22:33:28 +0800
Subject: [PATCH 838/863] USB: ehci: fix remove of ehci debugfs dir
The patch below on gregkh tree only creates 'lpm' file under
ehci->debug_dir, but not removes it when unloading module,
USB: EHCI: EHCI 1.1 addendum: preparation
which can make loading of ehci-hcd module failed after unloading it.
This patch replaces debugfs_remove with debugfs_remove_recursive
to remove ehci debugfs dir and files. It does fix the bug above,
and may simplify the removing procedure.
Also, remove the debug_registers, debug_async and debug_periodic
field from ehci_hcd struct since they are useless now.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-dbg.c | 58 ++++++++++++++-----------------------
drivers/usb/host/ehci.h | 4 ---
2 files changed, 21 insertions(+), 41 deletions(-)
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 4498efb49b95a..76b7fd2d838a3 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1049,49 +1049,33 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root);
if (!ehci->debug_dir)
- goto dir_error;
-
- ehci->debug_async = debugfs_create_file("async", S_IRUGO,
- ehci->debug_dir, bus,
- &debug_async_fops);
- if (!ehci->debug_async)
- goto async_error;
-
- ehci->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
- ehci->debug_dir, bus,
- &debug_periodic_fops);
- if (!ehci->debug_periodic)
- goto periodic_error;
-
- ehci->debug_registers = debugfs_create_file("registers", S_IRUGO,
- ehci->debug_dir, bus,
- &debug_registers_fops);
-
- ehci->debug_registers = debugfs_create_file("lpm", S_IRUGO|S_IWUGO,
- ehci->debug_dir, bus,
- &debug_lpm_fops);
- if (!ehci->debug_registers)
- goto registers_error;
+ return;
+
+ if (!debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus,
+ &debug_async_fops))
+ goto file_error;
+
+ if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus,
+ &debug_periodic_fops))
+ goto file_error;
+
+ if (!debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus,
+ &debug_registers_fops))
+ goto file_error;
+
+ if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+ &debug_lpm_fops))
+ goto file_error;
+
return;
-registers_error:
- debugfs_remove(ehci->debug_periodic);
-periodic_error:
- debugfs_remove(ehci->debug_async);
-async_error:
- debugfs_remove(ehci->debug_dir);
-dir_error:
- ehci->debug_periodic = NULL;
- ehci->debug_async = NULL;
- ehci->debug_dir = NULL;
+file_error:
+ debugfs_remove_recursive(ehci->debug_dir);
}
static inline void remove_debug_files (struct ehci_hcd *ehci)
{
- debugfs_remove(ehci->debug_registers);
- debugfs_remove(ehci->debug_periodic);
- debugfs_remove(ehci->debug_async);
- debugfs_remove(ehci->debug_dir);
+ debugfs_remove_recursive(ehci->debug_dir);
}
#endif /* STUB_DEBUG_FILES */
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index e5b9ece8a077e..bde823f704e9a 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -156,10 +156,6 @@ struct ehci_hcd { /* one per controller */
/* debug files */
#ifdef DEBUG
struct dentry *debug_dir;
- struct dentry *debug_async;
- struct dentry *debug_periodic;
- struct dentry *debug_registers;
- struct dentry *debug_lpm;
#endif
};
--
GitLab
From f283925fe9ef4ee75dc43e4c2bfbbd6b8a70bd0a Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 28 Jul 2010 17:12:39 -0400
Subject: [PATCH 839/863] USB: usb-storage: implement autosuspend
This patch (as1400) adds runtime-PM support to usb-storage. It
utilizes the SCSI layer's runtime-PM implementation, so its scope is
limited. Currently the only effect is that disk-like devices (such as
card readers or flash drives) will be autosuspended if they aren't
mounted and their device files aren't open. This would apply, for
example, to card readers that don't contain a memory card.
Unfortunately this won't interact very well with the removable-media
polling normally carried out by hal or DeviceKit. Maybe those
programs can be changed to use a longer polling interval, or maybe the
default autosuspend time for usb-storage should be set to something
below 1 second.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/storage/usb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index a7d0bf9d92a75..90bb0175a1526 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -336,6 +336,7 @@ static int usb_stor_control_thread(void * __us)
else {
US_DEBUG(usb_stor_show_command(us->srb));
us->proto_handler(us->srb, us);
+ usb_mark_last_busy(us->pusb_dev);
}
/* lock access to the state */
@@ -845,6 +846,7 @@ static int usb_stor_scan_thread(void * __us)
/* Should we unbind if no devices were detected? */
}
+ usb_autopm_put_interface(us->pusb_intf);
complete_and_exit(&us->scanning_done, 0);
}
@@ -968,6 +970,7 @@ int usb_stor_probe2(struct us_data *us)
goto BadDevice;
}
+ usb_autopm_get_interface_no_resume(us->pusb_intf);
wake_up_process(th);
return 0;
@@ -1040,6 +1043,7 @@ static struct usb_driver usb_storage_driver = {
.pre_reset = usb_stor_pre_reset,
.post_reset = usb_stor_post_reset,
.id_table = usb_storage_usb_ids,
+ .supports_autosuspend = 1,
.soft_unbind = 1,
};
--
GitLab
From 52af954599396e5945a895035525c703f2761b20 Mon Sep 17 00:00:00 2001
From: Bill Pemberton <wfp5p@virginia.edu>
Date: Thu, 29 Jul 2010 11:05:41 -0400
Subject: [PATCH 840/863] USB: add USB serial ssu100 driver
Add support for the Quatech SSU-100 single port usb to serial device.
This driver is based on the ftdi_sio.c driver and the original
serqt_usb driver from Quatech.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/Kconfig | 9 +
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/ssu100.c | 698 ++++++++++++++++++++++++++++++++++++
3 files changed, 708 insertions(+)
create mode 100644 drivers/usb/serial/ssu100.c
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index bd8aab0ef1cfc..916b2b6d765f4 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -642,6 +642,15 @@ config USB_SERIAL_ZIO
To compile this driver as a module, choose M here: the
module will be called zio.
+config USB_SERIAL_SSU100
+ tristate "USB Quatech SSU-100 Single Port Serial Driver"
+ help
+ Say Y here if you want to use the Quatech SSU-100 single
+ port usb to serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ssu100.
+
config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index e54c728c016ef..40ebe17b6ea84 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o
obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o
obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o
obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
new file mode 100644
index 0000000000000..6e82d4f54bc87
--- /dev/null
+++ b/drivers/usb/serial/ssu100.c
@@ -0,0 +1,698 @@
+/*
+ * usb-serial driver for Quatech SSU-100
+ *
+ * based on ftdi_sio.c and the original serqt_usb.c from Quatech
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define QT_OPEN_CLOSE_CHANNEL 0xca
+#define QT_SET_GET_DEVICE 0xc2
+#define QT_SET_GET_REGISTER 0xc0
+#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc
+#define QT_SET_ATF 0xcd
+#define QT_GET_SET_UART 0xc1
+#define QT_TRANSFER_IN 0xc0
+#define QT_HW_FLOW_CONTROL_MASK 0xc5
+#define QT_SW_FLOW_CONTROL_MASK 0xc6
+
+#define MODEM_CTL_REGISTER 0x04
+#define MODEM_STATUS_REGISTER 0x06
+
+
+#define SERIAL_LSR_OE 0x02
+#define SERIAL_LSR_PE 0x04
+#define SERIAL_LSR_FE 0x08
+#define SERIAL_LSR_BI 0x10
+
+#define SERIAL_LSR_TEMT 0x40
+
+#define SERIAL_MCR_DTR 0x01
+#define SERIAL_MCR_RTS 0x02
+#define SERIAL_MCR_LOOP 0x10
+
+#define SERIAL_MSR_CTS 0x10
+#define SERIAL_MSR_CD 0x80
+#define SERIAL_MSR_RI 0x40
+#define SERIAL_MSR_DSR 0x20
+#define SERIAL_MSR_MASK 0xf0
+
+#define SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS)
+
+#define SERIAL_8_DATA 0x03
+#define SERIAL_7_DATA 0x02
+#define SERIAL_6_DATA 0x01
+#define SERIAL_5_DATA 0x00
+
+#define SERIAL_ODD_PARITY 0X08
+#define SERIAL_EVEN_PARITY 0X18
+
+#define MAX_BAUD_RATE 460800
+
+#define ATC_DISABLED 0x00
+#define DUPMODE_BITS 0xc0
+#define RR_BITS 0x03
+#define LOOPMODE_BITS 0x41
+#define RS232_MODE 0x00
+#define RTSCTS_TO_CONNECTOR 0x40
+#define CLKS_X4 0x02
+#define FULLPWRBIT 0x00000080
+#define NEXT_BOARD_POWER_BIT 0x00000004
+
+static int debug = 1;
+
+/* Version Information */
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
+
+#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */
+#define QUATECH_SSU100 0xC020 /* SSU100 */
+
+static const struct usb_device_id id_table[] = {
+ {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+
+static struct usb_driver ssu100_driver = {
+ .name = "ssu100",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
+ .no_dynamic_id = 1,
+ .supports_autosuspend = 1,
+};
+
+struct ssu100_port_private {
+ u8 shadowLSR;
+ u8 shadowMSR;
+ wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
+ unsigned short max_packet_size;
+};
+
+static void ssu100_release(struct usb_serial *serial)
+{
+ struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);
+
+ dbg("%s", __func__);
+ kfree(priv);
+}
+
+static inline int ssu100_control_msg(struct usb_device *dev,
+ u8 request, u16 data, u16 index)
+{
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ request, 0x40, data, index,
+ NULL, 0, 300);
+}
+
+static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
+{
+ u16 x = ((u16)(data[1] << 8) | (u16)(data[0]));
+
+ return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
+}
+
+
+static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
+{
+ return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ QT_SET_GET_DEVICE, 0xc0, 0, 0,
+ data, 3, 300);
+}
+
+static inline int ssu100_getregister(struct usb_device *dev,
+ unsigned short uart,
+ unsigned short reg,
+ u8 *data)
+{
+ return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ QT_SET_GET_REGISTER, 0xc0, reg,
+ uart, data, sizeof(*data), 300);
+
+}
+
+
+static inline int ssu100_setregister(struct usb_device *dev,
+ unsigned short uart,
+ u16 data)
+{
+ u16 value = (data << 8) | MODEM_CTL_REGISTER;
+
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ QT_SET_GET_REGISTER, 0x40, value, uart,
+ NULL, 0, 300);
+
+}
+
+#define set_mctrl(dev, set) update_mctrl((dev), (set), 0)
+#define clear_mctrl(dev, clear) update_mctrl((dev), 0, (clear))
+
+/* these do not deal with device that have more than 1 port */
+static inline int update_mctrl(struct usb_device *dev, unsigned int set,
+ unsigned int clear)
+{
+ unsigned urb_value;
+ int result;
+
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+ dbg("%s - DTR|RTS not being set|cleared", __func__);
+ return 0; /* no change */
+ }
+
+ clear &= ~set; /* 'set' takes precedence over 'clear' */
+ urb_value = 0;
+ if (set & TIOCM_DTR)
+ urb_value |= SERIAL_MCR_DTR;
+ if (set & TIOCM_RTS)
+ urb_value |= SERIAL_MCR_RTS;
+
+ result = ssu100_setregister(dev, 0, urb_value);
+ if (result < 0)
+ dbg("%s Error from MODEM_CTRL urb", __func__);
+
+ return result;
+}
+
+static int ssu100_initdevice(struct usb_device *dev)
+{
+ u8 *data;
+ int result = 0;
+
+ dbg("%s", __func__);
+
+ data = kzalloc(3, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ result = ssu100_getdevice(dev, data);
+ if (result < 0) {
+ dbg("%s - get_device failed %i", __func__, result);
+ goto out;
+ }
+
+ data[1] &= ~FULLPWRBIT;
+
+ result = ssu100_setdevice(dev, data);
+ if (result < 0) {
+ dbg("%s - setdevice failed %i", __func__, result);
+ goto out;
+ }
+
+ result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
+ if (result < 0) {
+ dbg("%s - set prebuffer level failed %i", __func__, result);
+ goto out;
+ }
+
+ result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
+ if (result < 0) {
+ dbg("%s - set ATFprebuffer level failed %i", __func__, result);
+ goto out;
+ }
+
+ result = ssu100_getdevice(dev, data);
+ if (result < 0) {
+ dbg("%s - get_device failed %i", __func__, result);
+ goto out;
+ }
+
+ data[0] &= ~(RR_BITS | DUPMODE_BITS);
+ data[0] |= CLKS_X4;
+ data[1] &= ~(LOOPMODE_BITS);
+ data[1] |= RS232_MODE;
+
+ result = ssu100_setdevice(dev, data);
+ if (result < 0) {
+ dbg("%s - setdevice failed %i", __func__, result);
+ goto out;
+ }
+
+out: kfree(data);
+ return result;
+
+}
+
+
+static void ssu100_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct usb_device *dev = port->serial->dev;
+ struct ktermios *termios = tty->termios;
+ u16 baud, divisor, remainder;
+ unsigned int cflag = termios->c_cflag;
+ u16 urb_value = 0; /* will hold the new flags */
+ int result;
+
+ dbg("%s", __func__);
+
+ if (cflag & PARENB) {
+ if (cflag & PARODD)
+ urb_value |= SERIAL_ODD_PARITY;
+ else
+ urb_value |= SERIAL_EVEN_PARITY;
+ }
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ urb_value |= SERIAL_5_DATA;
+ break;
+ case CS6:
+ urb_value |= SERIAL_6_DATA;
+ break;
+ case CS7:
+ urb_value |= SERIAL_7_DATA;
+ break;
+ default:
+ case CS8:
+ urb_value |= SERIAL_8_DATA;
+ break;
+ }
+
+ baud = tty_get_baud_rate(tty);
+ if (!baud)
+ baud = 9600;
+
+ dbg("%s - got baud = %d\n", __func__, baud);
+
+
+ divisor = MAX_BAUD_RATE / baud;
+ remainder = MAX_BAUD_RATE % baud;
+ if (((remainder * 2) >= baud) && (baud != 110))
+ divisor++;
+
+ urb_value = urb_value << 8;
+
+ result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
+ if (result < 0)
+ dbg("%s - set uart failed", __func__);
+
+ if (cflag & CRTSCTS)
+ result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+ SERIAL_CRTSCTS, 0);
+ else
+ result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+ 0, 0);
+ if (result < 0)
+ dbg("%s - set HW flow control failed", __func__);
+
+ if (I_IXOFF(tty) || I_IXON(tty)) {
+ u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));
+
+ result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+ x, 0);
+ } else
+ result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+ 0, 0);
+
+ if (result < 0)
+ dbg("%s - set SW flow control failed", __func__);
+
+}
+
+
+static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct usb_device *dev = port->serial->dev;
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+ u8 *data;
+ int result;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ data = kzalloc(2, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ QT_OPEN_CLOSE_CHANNEL,
+ QT_TRANSFER_IN, 0x01,
+ 0, data, 2, 300);
+ if (result < 0) {
+ dbg("%s - open failed %i", __func__, result);
+ kfree(data);
+ return result;
+ }
+
+ priv->shadowLSR = data[0] & (SERIAL_LSR_OE | SERIAL_LSR_PE |
+ SERIAL_LSR_FE | SERIAL_LSR_BI);
+
+ priv->shadowMSR = data[1] & (SERIAL_MSR_CTS | SERIAL_MSR_DSR |
+ SERIAL_MSR_RI | SERIAL_MSR_CD);
+
+ kfree(data);
+
+/* set to 9600 */
+ result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
+ if (result < 0)
+ dbg("%s - set uart failed", __func__);
+
+ if (tty)
+ ssu100_set_termios(tty, port, tty->termios);
+
+ return usb_serial_generic_open(tty, port);
+}
+
+static void ssu100_close(struct usb_serial_port *port)
+{
+ dbg("%s", __func__);
+ usb_serial_generic_close(port);
+}
+
+static int get_serial_info(struct usb_serial_port *port,
+ struct serial_struct __user *retinfo)
+{
+ struct serial_struct tmp;
+
+ if (!retinfo)
+ return -EFAULT;
+
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.line = port->serial->minor;
+ tmp.port = 0;
+ tmp.irq = 0;
+ tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+ tmp.xmit_fifo_size = port->bulk_out_size;
+ tmp.baud_base = 9600;
+ tmp.close_delay = 5*HZ;
+ tmp.closing_wait = 30*HZ;
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+
+ dbg("%s cmd 0x%04x", __func__, cmd);
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return get_serial_info(port,
+ (struct serial_struct __user *) arg);
+
+ case TIOCMIWAIT:
+ while (priv != NULL) {
+ u8 prevMSR = priv->shadowMSR & SERIAL_MSR_MASK;
+ interruptible_sleep_on(&priv->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ else {
+ u8 diff = (priv->shadowMSR & SERIAL_MSR_MASK) ^ prevMSR;
+ if (!diff)
+ return -EIO; /* no change => error */
+
+ /* Return 0 if caller wanted to know about
+ these bits */
+
+ if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) ||
+ ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) ||
+ ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) ||
+ ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS)))
+ return 0;
+ }
+ }
+ return 0;
+
+ default:
+ break;
+ }
+
+ dbg("%s arg not supported", __func__);
+
+ return -ENOIOCTLCMD;
+}
+
+static void ssu100_set_max_packet_size(struct usb_serial_port *port)
+{
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ struct usb_device *udev = serial->dev;
+
+ struct usb_interface *interface = serial->interface;
+ struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+
+ unsigned num_endpoints;
+ int i;
+
+ num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+ dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
+
+ for (i = 0; i < num_endpoints; i++) {
+ dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
+ interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+ ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+ }
+
+ /* set max packet size based on descriptor */
+ priv->max_packet_size = ep_desc->wMaxPacketSize;
+
+ dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
+}
+
+static int ssu100_attach(struct usb_serial *serial)
+{
+ struct ssu100_port_private *priv;
+ struct usb_serial_port *port = *serial->port;
+
+ dbg("%s", __func__);
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
+ sizeof(*priv));
+ return -ENOMEM;
+ }
+
+ init_waitqueue_head(&priv->delta_msr_wait);
+ usb_set_serial_port_data(port, priv);
+
+ ssu100_set_max_packet_size(port);
+
+ return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_device *dev = port->serial->dev;
+ u8 *d;
+ int r;
+
+ dbg("%s\n", __func__);
+
+ d = kzalloc(2, GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d);
+ if (r < 0)
+ goto mget_out;
+
+ r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1);
+ if (r < 0)
+ goto mget_out;
+
+ r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) |
+ (d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) |
+ (d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) |
+ (d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) |
+ (d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) |
+ (d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0);
+
+mget_out:
+ kfree(d);
+ return r;
+}
+
+static int ssu100_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_device *dev = port->serial->dev;
+
+ dbg("%s\n", __func__);
+ return update_mctrl(dev, set, clear);
+}
+
+static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct usb_device *dev = port->serial->dev;
+
+ dbg("%s\n", __func__);
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* Disable flow control */
+ if (!on &&
+ ssu100_setregister(dev, 0, 0) < 0)
+ dev_err(&port->dev, "error from flowcontrol urb\n");
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+ }
+ mutex_unlock(&port->serial->disc_mutex);
+}
+
+static int ssu100_process_packet(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ssu100_port_private *priv,
+ char *packet, int len)
+{
+ int i;
+ char flag;
+ char *ch;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ if (len < 4) {
+ dbg("%s - malformed packet", __func__);
+ return 0;
+ }
+
+ if ((packet[0] == 0x1b) && (packet[1] == 0x1b) &&
+ ((packet[2] == 0x00) || (packet[2] == 0x01))) {
+ if (packet[2] == 0x00)
+ priv->shadowLSR = packet[3] & (SERIAL_LSR_OE |
+ SERIAL_LSR_PE |
+ SERIAL_LSR_FE |
+ SERIAL_LSR_BI);
+
+ if (packet[2] == 0x01) {
+ priv->shadowMSR = packet[3];
+ wake_up_interruptible(&priv->delta_msr_wait);
+ }
+
+ len -= 4;
+ ch = packet + 4;
+ } else
+ ch = packet;
+
+ if (!len)
+ return 0; /* status only */
+
+ if (port->port.console && port->sysrq) {
+ for (i = 0; i < len; i++, ch++) {
+ if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+ tty_insert_flip_char(tty, *ch, flag);
+ }
+ } else
+ tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
+
+ return len;
+}
+
+static void ssu100_process_read_urb(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+ char *data = (char *)urb->transfer_buffer;
+ struct tty_struct *tty;
+ int count = 0;
+ int i;
+ int len;
+
+ dbg("%s", __func__);
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+ len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+ count += ssu100_process_packet(tty, port, priv, &data[i], len);
+ }
+
+ if (count)
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+
+static struct usb_serial_driver ssu100_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ssu100",
+ },
+ .description = DRIVER_DESC,
+ .id_table = id_table,
+ .usb_driver = &ssu100_driver,
+ .num_ports = 1,
+ .bulk_in_size = 256,
+ .bulk_out_size = 256,
+ .open = ssu100_open,
+ .close = ssu100_close,
+ .attach = ssu100_attach,
+ .release = ssu100_release,
+ .dtr_rts = ssu100_dtr_rts,
+ .process_read_urb = ssu100_process_read_urb,
+ .tiocmget = ssu100_tiocmget,
+ .tiocmset = ssu100_tiocmset,
+ .ioctl = ssu100_ioctl,
+ .set_termios = ssu100_set_termios,
+};
+
+static int __init ssu100_init(void)
+{
+ int retval;
+
+ dbg("%s", __func__);
+
+ /* register with usb-serial */
+ retval = usb_serial_register(&ssu100_device);
+
+ if (retval)
+ goto failed_usb_sio_register;
+
+ retval = usb_register(&ssu100_driver);
+ if (retval)
+ goto failed_usb_register;
+
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
+
+ return 0;
+
+failed_usb_register:
+ usb_serial_deregister(&ssu100_device);
+failed_usb_sio_register:
+ return retval;
+}
+
+static void __exit ssu100_exit(void)
+{
+ usb_deregister(&ssu100_driver);
+ usb_serial_deregister(&ssu100_device);
+}
+
+module_init(ssu100_init);
+module_exit(ssu100_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
--
GitLab
From c6ba1c2af2da31ffb57949edbd1dba34f97d1d4b Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 29 Jul 2010 15:54:38 -0700
Subject: [PATCH 841/863] USB:: fix linux/usb.h kernel-doc warnings
Fix kernel-doc warnings in linux/usb.h:
Warning(include/linux/usb.h:185): No description found for parameter 'resetting_device'
Warning(include/linux/usb.h:1212): No description found for parameter 'stream_id'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
include/linux/usb.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/linux/usb.h b/include/linux/usb.h
index e6cbc34901f47..35fe6ab222bbb 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -127,6 +127,8 @@ enum usb_interface_condition {
* queued reset so that usb_cancel_queued_reset() doesn't try to
* remove from the workqueue when running inside the worker
* thread. See __usb_queue_reset_device().
+ * @resetting_device: USB core reset the device, so use alt setting 0 as
+ * current; needs bandwidth alloc after reset.
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
@@ -1015,6 +1017,7 @@ typedef void (*usb_complete_t)(struct urb *);
* is a different endpoint (and pipe) from "out" endpoint two.
* The current configuration controls the existence, type, and
* maximum packet size of any given endpoint.
+ * @stream_id: the endpoint's stream ID for bulk streams
* @dev: Identifies the USB device to perform the request.
* @status: This is read in non-iso completion functions to get the
* status of the particular request. ISO requests only use it
--
GitLab
From 021bff9179c2d19c26599dc3e9134d04cf1c8a3a Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:12:20 -0700
Subject: [PATCH 842/863] USB: xhci: Performance - move functions that find ep
ring.
I've been using perf to measure the top symbols while transferring 1GB of data
on a USB 3.0 drive with dd. This is using the raw disk with /dev/sdb, with a
block size of 1K.
During performance testing, the top symbol was xhci_triad_to_transfer_ring(), a
function that should return immediately if streams are not enabled for an
endpoint. It turned out that the functions to find the endpoint ring was
defined in xhci-mem.c and used in xhci-ring.c and xhci-hcd.c. I moved a copy of
xhci_triad_to_transfer_ring() and xhci_urb_to_transfer_ring() into xhci-ring.c
and declared them static. I also made a static version of
xhci_urb_to_transfer_ring() in xhci.c.
This improved throughput on a 1GB read of the raw disk with dd from
186MB/s to 195MB/s, and perf reported sampling the xhci_triad_to_transfer_ring()
0.06% of the time, rather than 9.26% of the time.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-mem.c | 43 -----------------------------------
drivers/usb/host/xhci-ring.c | 44 ++++++++++++++++++++++++++++++++++++
drivers/usb/host/xhci.c | 41 +++++++++++++++++++++++++++++++++
drivers/usb/host/xhci.h | 5 ----
4 files changed, 85 insertions(+), 48 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 7d60d1f4debb3..ac57f538f9577 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -391,49 +391,6 @@ struct xhci_ring *xhci_stream_id_to_ring(
return ep->stream_info->stream_rings[stream_id];
}
-struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
- unsigned int slot_id, unsigned int ep_index,
- unsigned int stream_id)
-{
- struct xhci_virt_ep *ep;
-
- ep = &xhci->devs[slot_id]->eps[ep_index];
- /* Common case: no streams */
- if (!(ep->ep_state & EP_HAS_STREAMS))
- return ep->ring;
-
- if (stream_id == 0) {
- xhci_warn(xhci,
- "WARN: Slot ID %u, ep index %u has streams, "
- "but URB has no stream ID.\n",
- slot_id, ep_index);
- return NULL;
- }
-
- if (stream_id < ep->stream_info->num_streams)
- return ep->stream_info->stream_rings[stream_id];
-
- xhci_warn(xhci,
- "WARN: Slot ID %u, ep index %u has "
- "stream IDs 1 to %u allocated, "
- "but stream ID %u is requested.\n",
- slot_id, ep_index,
- ep->stream_info->num_streams - 1,
- stream_id);
- return NULL;
-}
-
-/* Get the right ring for the given URB.
- * If the endpoint supports streams, boundary check the URB's stream ID.
- * If the endpoint doesn't support streams, return the singular endpoint ring.
- */
-struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
- struct urb *urb)
-{
- return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
- xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
-}
-
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
static int xhci_test_radix_tree(struct xhci_hcd *xhci,
unsigned int num_streams,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index da3519e76e2bb..7f1c54585b637 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -419,6 +419,50 @@ static struct xhci_segment *find_trb_seg(
return cur_seg;
}
+
+static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ unsigned int stream_id)
+{
+ struct xhci_virt_ep *ep;
+
+ ep = &xhci->devs[slot_id]->eps[ep_index];
+ /* Common case: no streams */
+ if (!(ep->ep_state & EP_HAS_STREAMS))
+ return ep->ring;
+
+ if (stream_id == 0) {
+ xhci_warn(xhci,
+ "WARN: Slot ID %u, ep index %u has streams, "
+ "but URB has no stream ID.\n",
+ slot_id, ep_index);
+ return NULL;
+ }
+
+ if (stream_id < ep->stream_info->num_streams)
+ return ep->stream_info->stream_rings[stream_id];
+
+ xhci_warn(xhci,
+ "WARN: Slot ID %u, ep index %u has "
+ "stream IDs 1 to %u allocated, "
+ "but stream ID %u is requested.\n",
+ slot_id, ep_index,
+ ep->stream_info->num_streams - 1,
+ stream_id);
+ return NULL;
+}
+
+/* Get the right ring for the given URB.
+ * If the endpoint supports streams, boundary check the URB's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+ struct urb *urb)
+{
+ return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
+ xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
+}
+
/*
* Move the xHC's endpoint ring dequeue pointer past cur_td.
* Record the new state of the xHC's endpoint ring dequeue segment,
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 89ac48534099b..f5e0b00cbb837 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -916,6 +916,47 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
return -ESHUTDOWN;
}
+/* Get the right ring for the given URB.
+ * If the endpoint supports streams, boundary check the URB's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+ struct urb *urb)
+{
+ unsigned int slot_id;
+ unsigned int ep_index;
+ unsigned int stream_id;
+ struct xhci_virt_ep *ep;
+
+ slot_id = urb->dev->slot_id;
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+ stream_id = urb->stream_id;
+ ep = &xhci->devs[slot_id]->eps[ep_index];
+ /* Common case: no streams */
+ if (!(ep->ep_state & EP_HAS_STREAMS))
+ return ep->ring;
+
+ if (stream_id == 0) {
+ xhci_warn(xhci,
+ "WARN: Slot ID %u, ep index %u has streams, "
+ "but URB has no stream ID.\n",
+ slot_id, ep_index);
+ return NULL;
+ }
+
+ if (stream_id < ep->stream_info->num_streams)
+ return ep->stream_info->stream_rings[stream_id];
+
+ xhci_warn(xhci,
+ "WARN: Slot ID %u, ep index %u has "
+ "stream IDs 1 to %u allocated, "
+ "but stream ID %u is requested.\n",
+ slot_id, ep_index,
+ ep->stream_info->num_streams - 1,
+ stream_id);
+ return NULL;
+}
+
/*
* Remove the URB's TD from the endpoint ring. This may cause the HC to stop
* USB transfers, potentially stopping in the middle of a TRB buffer. The HC
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e1383d91468be..9fe95c4e2a567 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1344,11 +1344,6 @@ void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
struct xhci_ring *xhci_dma_to_transfer_ring(
struct xhci_virt_ep *ep,
u64 address);
-struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
- struct urb *urb);
-struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
- unsigned int slot_id, unsigned int ep_index,
- unsigned int stream_id);
struct xhci_ring *xhci_stream_id_to_ring(
struct xhci_virt_device *dev,
unsigned int ep_index,
--
GitLab
From 9032cd52798daf4cd6314ffea5030b37b3eb34af Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:12:29 -0700
Subject: [PATCH 843/863] USB: xhci: Performance - move interrupt handlers into
xhci-ring.c
Most of the work for interrupt handling is done in xhci-ring.c, so it makes
sense to move the functions that are first called when an interrupt happens
(xhci_irq() or xhci_msi_irq()) into xhci-ring.c, so that the compiler can better
optimize them.
Shorten some lines to make it pass checkpatch.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 103 +++++++++++++++++++++++++++++++++++
drivers/usb/host/xhci.c | 103 -----------------------------------
drivers/usb/host/xhci.h | 1 +
3 files changed, 104 insertions(+), 103 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7f1c54585b637..4b50a02ba114a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2030,6 +2030,109 @@ void xhci_handle_event(struct xhci_hcd *xhci)
/* Are there more items on the event ring? */
xhci_handle_event(xhci);
}
+/*
+ * Called in interrupt context when there might be work
+ * queued on the event ring
+ *
+ * xhci->lock must be held by caller.
+ */
+static void xhci_work(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ u64 temp_64;
+
+ /*
+ * Clear the op reg interrupt status first,
+ * so we can receive interrupts from other MSI-X interrupters.
+ * Write 1 to clear the interrupt status.
+ */
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp |= STS_EINT;
+ xhci_writel(xhci, temp, &xhci->op_regs->status);
+ /* FIXME when MSI-X is supported and there are multiple vectors */
+ /* Clear the MSI-X event interrupt status */
+
+ /* Acknowledge the interrupt */
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp |= 0x3;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
+ "Shouldn't IRQs be disabled?\n");
+ else
+ /* FIXME this should be a delayed service routine
+ * that clears the EHB.
+ */
+ xhci_handle_event(xhci);
+
+ /* Clear the event handler busy flag (RW1C); event ring is empty. */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ /* Flush posted writes -- FIXME is this necessary? */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
+}
+
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 temp, temp2;
+ union xhci_trb *trb;
+
+ spin_lock(&xhci->lock);
+ trb = xhci->event_ring->dequeue;
+ /* Check if the xHC generated the interrupt, or the irq is shared */
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (temp == 0xffffffff && temp2 == 0xffffffff)
+ goto hw_died;
+
+ if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
+ spin_unlock(&xhci->lock);
+ xhci_warn(xhci, "Spurious interrupt.\n");
+ return IRQ_NONE;
+ }
+ xhci_dbg(xhci, "op reg status = %08x\n", temp);
+ xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+ xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+ xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+ (unsigned long long)
+ xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
+
+ if (temp & STS_FATAL) {
+ xhci_warn(xhci, "WARNING: Host System Error\n");
+ xhci_halt(xhci);
+hw_died:
+ xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+ spin_unlock(&xhci->lock);
+ return -ESHUTDOWN;
+ }
+
+ xhci_work(xhci);
+ spin_unlock(&xhci->lock);
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
+{
+ irqreturn_t ret;
+
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ ret = xhci_irq(hcd);
+
+ return ret;
+}
/**** Endpoint Ring Operations ****/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f5e0b00cbb837..d5c550ea3e68e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -172,17 +172,6 @@ int xhci_reset(struct xhci_hcd *xhci)
return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
}
-static irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
-{
- irqreturn_t ret;
-
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-
- ret = xhci_irq(hcd);
-
- return ret;
-}
-
/*
* Free IRQs
* free all IRQs request
@@ -332,100 +321,8 @@ int xhci_init(struct usb_hcd *hcd)
return retval;
}
-/*
- * Called in interrupt context when there might be work
- * queued on the event ring
- *
- * xhci->lock must be held by caller.
- */
-static void xhci_work(struct xhci_hcd *xhci)
-{
- u32 temp;
- u64 temp_64;
-
- /*
- * Clear the op reg interrupt status first,
- * so we can receive interrupts from other MSI-X interrupters.
- * Write 1 to clear the interrupt status.
- */
- temp = xhci_readl(xhci, &xhci->op_regs->status);
- temp |= STS_EINT;
- xhci_writel(xhci, temp, &xhci->op_regs->status);
- /* FIXME when MSI-X is supported and there are multiple vectors */
- /* Clear the MSI-X event interrupt status */
-
- /* Acknowledge the interrupt */
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- temp |= 0x3;
- xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
- /* Flush posted writes */
- xhci_readl(xhci, &xhci->ir_set->irq_pending);
-
- if (xhci->xhc_state & XHCI_STATE_DYING)
- xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
- "Shouldn't IRQs be disabled?\n");
- else
- /* FIXME this should be a delayed service routine
- * that clears the EHB.
- */
- xhci_handle_event(xhci);
-
- /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
- temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
- /* Flush posted writes -- FIXME is this necessary? */
- xhci_readl(xhci, &xhci->ir_set->irq_pending);
-}
-
/*-------------------------------------------------------------------------*/
-/*
- * xHCI spec says we can get an interrupt, and if the HC has an error condition,
- * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
- * indicators of an event TRB error, but we check the status *first* to be safe.
- */
-irqreturn_t xhci_irq(struct usb_hcd *hcd)
-{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- u32 temp, temp2;
- union xhci_trb *trb;
-
- spin_lock(&xhci->lock);
- trb = xhci->event_ring->dequeue;
- /* Check if the xHC generated the interrupt, or the irq is shared */
- temp = xhci_readl(xhci, &xhci->op_regs->status);
- temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- if (temp == 0xffffffff && temp2 == 0xffffffff)
- goto hw_died;
-
- if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
- spin_unlock(&xhci->lock);
- return IRQ_NONE;
- }
- xhci_dbg(xhci, "op reg status = %08x\n", temp);
- xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
- xhci_dbg(xhci, "Event ring dequeue ptr:\n");
- xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
- (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
- lower_32_bits(trb->link.segment_ptr),
- upper_32_bits(trb->link.segment_ptr),
- (unsigned int) trb->link.intr_target,
- (unsigned int) trb->link.control);
-
- if (temp & STS_FATAL) {
- xhci_warn(xhci, "WARNING: Host System Error\n");
- xhci_halt(xhci);
-hw_died:
- xhci_to_hcd(xhci)->state = HC_STATE_HALT;
- spin_unlock(&xhci->lock);
- return -ESHUTDOWN;
- }
-
- xhci_work(xhci);
- spin_unlock(&xhci->lock);
-
- return IRQ_HANDLED;
-}
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
void xhci_event_ring_work(unsigned long arg)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 9fe95c4e2a567..6d829c41d963f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1371,6 +1371,7 @@ void xhci_stop(struct usb_hcd *hcd);
void xhci_shutdown(struct usb_hcd *hcd);
int xhci_get_frame(struct usb_hcd *hcd);
irqreturn_t xhci_irq(struct usb_hcd *hcd);
+irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
--
GitLab
From bda531452c143b0bafe3dd6567dbfe9274009345 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:12:38 -0700
Subject: [PATCH 844/863] USB: xhci: Performance - move xhci_work() into
xhci_irq()
When we move xhci_work() into xhci_irq(), we don't need to read the operational
register status field twice.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 73 +++++++++++++++---------------------
1 file changed, 30 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 4b50a02ba114a..f9c08d2fe33ae 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2030,48 +2030,6 @@ void xhci_handle_event(struct xhci_hcd *xhci)
/* Are there more items on the event ring? */
xhci_handle_event(xhci);
}
-/*
- * Called in interrupt context when there might be work
- * queued on the event ring
- *
- * xhci->lock must be held by caller.
- */
-static void xhci_work(struct xhci_hcd *xhci)
-{
- u32 temp;
- u64 temp_64;
-
- /*
- * Clear the op reg interrupt status first,
- * so we can receive interrupts from other MSI-X interrupters.
- * Write 1 to clear the interrupt status.
- */
- temp = xhci_readl(xhci, &xhci->op_regs->status);
- temp |= STS_EINT;
- xhci_writel(xhci, temp, &xhci->op_regs->status);
- /* FIXME when MSI-X is supported and there are multiple vectors */
- /* Clear the MSI-X event interrupt status */
-
- /* Acknowledge the interrupt */
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- temp |= 0x3;
- xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
-
- if (xhci->xhc_state & XHCI_STATE_DYING)
- xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
- "Shouldn't IRQs be disabled?\n");
- else
- /* FIXME this should be a delayed service routine
- * that clears the EHB.
- */
- xhci_handle_event(xhci);
-
- /* Clear the event handler busy flag (RW1C); event ring is empty. */
- temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
- /* Flush posted writes -- FIXME is this necessary? */
- xhci_readl(xhci, &xhci->ir_set->irq_pending);
-}
/*
* xHCI spec says we can get an interrupt, and if the HC has an error condition,
@@ -2083,6 +2041,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 temp, temp2;
union xhci_trb *trb;
+ u64 temp_64;
spin_lock(&xhci->lock);
trb = xhci->event_ring->dequeue;
@@ -2117,7 +2076,35 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
return -ESHUTDOWN;
}
- xhci_work(xhci);
+ /*
+ * Clear the op reg interrupt status first,
+ * so we can receive interrupts from other MSI-X interrupters.
+ * Write 1 to clear the interrupt status.
+ */
+ temp |= STS_EINT;
+ xhci_writel(xhci, temp, &xhci->op_regs->status);
+ /* FIXME when MSI-X is supported and there are multiple vectors */
+ /* Clear the MSI-X event interrupt status */
+
+ /* Acknowledge the interrupt */
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp |= 0x3;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
+ "Shouldn't IRQs be disabled?\n");
+ else
+ /* FIXME this should be a delayed service routine
+ * that clears the EHB.
+ */
+ xhci_handle_event(xhci);
+
+ /* Clear the event handler busy flag (RW1C); event ring is empty. */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ /* Flush posted writes -- FIXME is this necessary? */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
spin_unlock(&xhci->lock);
return IRQ_HANDLED;
--
GitLab
From 27e0dd4d7ccc3e8e2a79600c3608031022a2298c Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:12:43 -0700
Subject: [PATCH 845/863] USB: xhci: Remove unnecessary reads of IRQ_PENDING
register.
Remove a duplicate register read of the interrupt pending register from
xhci_irq(). Also, remove waiting on the posted write of that register.
The host will see it eventually. It will probably read the register
itself before deciding whether to interrupt the system again, forcing the
posted write to complete.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index f9c08d2fe33ae..eb4b10229a056 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2039,25 +2039,25 @@ void xhci_handle_event(struct xhci_hcd *xhci)
irqreturn_t xhci_irq(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- u32 temp, temp2;
+ u32 status, irq_pending;
union xhci_trb *trb;
u64 temp_64;
spin_lock(&xhci->lock);
trb = xhci->event_ring->dequeue;
/* Check if the xHC generated the interrupt, or the irq is shared */
- temp = xhci_readl(xhci, &xhci->op_regs->status);
- temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- if (temp == 0xffffffff && temp2 == 0xffffffff)
+ status = xhci_readl(xhci, &xhci->op_regs->status);
+ irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (status == 0xffffffff && irq_pending == 0xffffffff)
goto hw_died;
- if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
+ if (!(status & STS_EINT) && !ER_IRQ_PENDING(irq_pending)) {
spin_unlock(&xhci->lock);
xhci_warn(xhci, "Spurious interrupt.\n");
return IRQ_NONE;
}
- xhci_dbg(xhci, "op reg status = %08x\n", temp);
- xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+ xhci_dbg(xhci, "op reg status = %08x\n", status);
+ xhci_dbg(xhci, "ir set irq_pending = %08x\n", irq_pending);
xhci_dbg(xhci, "Event ring dequeue ptr:\n");
xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
(unsigned long long)
@@ -2067,7 +2067,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
(unsigned int) trb->link.intr_target,
(unsigned int) trb->link.control);
- if (temp & STS_FATAL) {
+ if (status & STS_FATAL) {
xhci_warn(xhci, "WARNING: Host System Error\n");
xhci_halt(xhci);
hw_died:
@@ -2081,15 +2081,14 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
* so we can receive interrupts from other MSI-X interrupters.
* Write 1 to clear the interrupt status.
*/
- temp |= STS_EINT;
- xhci_writel(xhci, temp, &xhci->op_regs->status);
+ status |= STS_EINT;
+ xhci_writel(xhci, status, &xhci->op_regs->status);
/* FIXME when MSI-X is supported and there are multiple vectors */
/* Clear the MSI-X event interrupt status */
/* Acknowledge the interrupt */
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- temp |= 0x3;
- xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+ irq_pending |= 0x3;
+ xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
if (xhci->xhc_state & XHCI_STATE_DYING)
xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
@@ -2103,8 +2102,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
/* Clear the event handler busy flag (RW1C); event ring is empty. */
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
- /* Flush posted writes -- FIXME is this necessary? */
- xhci_readl(xhci, &xhci->ir_set->irq_pending);
spin_unlock(&xhci->lock);
return IRQ_HANDLED;
--
GitLab
From d6d98a4d8d2411bca7e15d9c0796bf3bc30c3f21 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:12:46 -0700
Subject: [PATCH 846/863] USB: xhci: Make xhci_handle_event() static.
xhci_handle_event() is now only called from within xhci-ring.c, so make it
static.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/host/xhci.h | 1 -
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index eb4b10229a056..3b962ba5ef085 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1964,7 +1964,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
* This function handles all OS-owned events on the event ring. It may drop
* xhci->lock between event processing (e.g. to pass up port status changes).
*/
-void xhci_handle_event(struct xhci_hcd *xhci)
+static void xhci_handle_event(struct xhci_hcd *xhci)
{
union xhci_trb *event;
int update_ptrs = 1;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6d829c41d963f..25e108e981fa5 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1400,7 +1400,6 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
void xhci_ring_cmd_db(struct xhci_hcd *xhci);
void *xhci_setup_one_noop(struct xhci_hcd *xhci);
-void xhci_handle_event(struct xhci_hcd *xhci);
void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
--
GitLab
From c06d68b814d556cff5a4dc589215f5ed9f0b7fd5 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:12:49 -0700
Subject: [PATCH 847/863] USB: xhci: Minimize HW event ring dequeue pointer
writes.
The xHCI specification suggests that writing the hardware event ring dequeue
pointer register too often can be an expensive operation for the xHCI hardware
to manage. It suggests minimizing the number of writes to that register.
Originally, the driver wrote the event ring dequeue pointer after each
event was processed. Depending on how the event ring moderation register
is set up and how fast the transfers are completing, there may be several
events processed for each interrupt. This patch makes the hardware event
ring dequeue pointer be written only once per interrupt.
Make the transfer event handler and port status event handler only write
the software event ring dequeue pointer. Move the updating of the
hardware event ring dequeue pointer into the interrupt function. Move the
contents of xhci_set_hc_event_deq() into the interrupt handler. The
interrupt handler must clear the event handler busy flag, so it might as
well also write the dequeue pointer to the same register. This eliminates
two 32-bit PCI reads and two 32-bit PCI writes.
Reported-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 50 ++++++++++++++++++++++++++----------
1 file changed, 37 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3b962ba5ef085..7dfd17707d53b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1184,7 +1184,6 @@ static void handle_port_status(struct xhci_hcd *xhci,
/* Update event ring dequeue pointer before dropping the lock */
inc_deq(xhci, xhci->event_ring, true);
- xhci_set_hc_event_deq(xhci);
spin_unlock(&xhci->lock);
/* Pass this up to the core */
@@ -1924,7 +1923,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
*/
if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
inc_deq(xhci, xhci->event_ring, true);
- xhci_set_hc_event_deq(xhci);
}
if (ret) {
@@ -2022,11 +2020,10 @@ static void xhci_handle_event(struct xhci_hcd *xhci)
return;
}
- if (update_ptrs) {
- /* Update SW and HC event ring dequeue pointer */
+ if (update_ptrs)
+ /* Update SW event ring dequeue pointer */
inc_deq(xhci, xhci->event_ring, true);
- xhci_set_hc_event_deq(xhci);
- }
+
/* Are there more items on the event ring? */
xhci_handle_event(xhci);
}
@@ -2042,6 +2039,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
u32 status, irq_pending;
union xhci_trb *trb;
u64 temp_64;
+ union xhci_trb *event_ring_deq;
+ dma_addr_t deq;
spin_lock(&xhci->lock);
trb = xhci->event_ring->dequeue;
@@ -2090,18 +2089,43 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
irq_pending |= 0x3;
xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
- if (xhci->xhc_state & XHCI_STATE_DYING)
+ if (xhci->xhc_state & XHCI_STATE_DYING) {
xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
"Shouldn't IRQs be disabled?\n");
- else
- /* FIXME this should be a delayed service routine
- * that clears the EHB.
+ /* Clear the event handler busy flag (RW1C);
+ * the event ring should be empty.
*/
- xhci_handle_event(xhci);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB,
+ &xhci->ir_set->erst_dequeue);
+ spin_unlock(&xhci->lock);
+
+ return IRQ_HANDLED;
+ }
+
+ event_ring_deq = xhci->event_ring->dequeue;
+ /* FIXME this should be a delayed service routine
+ * that clears the EHB.
+ */
+ xhci_handle_event(xhci);
- /* Clear the event handler busy flag (RW1C); event ring is empty. */
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ /* If necessary, update the HW's version of the event ring deq ptr. */
+ if (event_ring_deq != xhci->event_ring->dequeue) {
+ deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+ xhci->event_ring->dequeue);
+ if (deq == 0)
+ xhci_warn(xhci, "WARN something wrong with SW event "
+ "ring dequeue ptr.\n");
+ /* Update HC event ring dequeue pointer */
+ temp_64 &= ERST_PTR_MASK;
+ temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
+ }
+
+ /* Clear the event handler busy flag (RW1C); event ring is empty. */
+ temp_64 |= ERST_EHB;
+ xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
+
spin_unlock(&xhci->lock);
return IRQ_HANDLED;
--
GitLab
From 257d585aaec469ded6ec15d8a8e7ebada21d7277 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:12:56 -0700
Subject: [PATCH 848/863] USB: xhci: Make xhci_set_hc_event_deq() static.
Now that the event handler functions no longer use xhci_set_hc_event_deq()
to update the event ring dequeue pointer, that function is not used by
anything in xhci-ring.c. Move that function into xhci-mem.c and make it
static.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-mem.c | 23 +++++++++++++++++++++++
drivers/usb/host/xhci-ring.c | 22 ----------------------
drivers/usb/host/xhci.h | 1 -
3 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index ac57f538f9577..4e51343ddffcd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1601,6 +1601,29 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
return 0;
}
+static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
+{
+ u64 temp;
+ dma_addr_t deq;
+
+ deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+ xhci->event_ring->dequeue);
+ if (deq == 0 && !in_interrupt())
+ xhci_warn(xhci, "WARN something wrong with SW event ring "
+ "dequeue ptr.\n");
+ /* Update HC event ring dequeue pointer */
+ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp &= ERST_PTR_MASK;
+ /* Don't clear the EHB bit (which is RW1C) because
+ * there might be more events to service.
+ */
+ temp &= ~ERST_EHB;
+ xhci_dbg(xhci, "// Write event ring dequeue pointer, "
+ "preserving EHB bit\n");
+ xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+ &xhci->ir_set->erst_dequeue);
+}
+
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7dfd17707d53b..f479f73711ac1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -301,28 +301,6 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
return 1;
}
-void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
-{
- u64 temp;
- dma_addr_t deq;
-
- deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
- xhci->event_ring->dequeue);
- if (deq == 0 && !in_interrupt())
- xhci_warn(xhci, "WARN something wrong with SW event ring "
- "dequeue ptr.\n");
- /* Update HC event ring dequeue pointer */
- temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- temp &= ERST_PTR_MASK;
- /* Don't clear the EHB bit (which is RW1C) because
- * there might be more events to service.
- */
- temp &= ~ERST_EHB;
- xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
- xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
- &xhci->ir_set->erst_dequeue);
-}
-
/* Ring the host controller doorbell after placing a command on the ring */
void xhci_ring_cmd_db(struct xhci_hcd *xhci)
{
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 25e108e981fa5..34a60d9f056a2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1400,7 +1400,6 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
void xhci_ring_cmd_db(struct xhci_hcd *xhci);
void *xhci_setup_one_noop(struct xhci_hcd *xhci);
-void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id);
--
GitLab
From c21599a36165dbc78b380846b254017a548b9de5 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:13:00 -0700
Subject: [PATCH 849/863] USB: xhci: Reduce reads and writes of interrupter
registers.
The interrupter register set includes a register that says whether interrupts
are pending for each event ring (the IP bit). Each MSI-X vector will get its
own interrupter set with separate IP bits. The status register includes an
"Event Interrupt (EINT)" bit that is set when an IP bit is set in any of the
interrupters.
When PCI interrupts are used, the EINT bit exactly mirrors the IP bit in the
single interrupter set, and it is a waste of time to check both registers when
trying to figure out if the xHC interrupted or another device on the shared IRQ
line interrupted. Only check the IP bit to reduce register reads.
The IP bit is automatically cleared by the xHC when MSI or MSI-X is enabled. It
doesn't make sense to read that register to check for shared interrupts (since
MSI and MSI-X aren't shared). It also doesn't make sense to write to that
register to clear the IP bit, since it is cleared by the hardware.
We can tell whether MSI or MSI-X is enabled by looking at the irq number in
hcd->irq. If it's -1, we know MSI or MSI-X is enabled.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index f479f73711ac1..6860e9f097bb3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2014,7 +2014,7 @@ static void xhci_handle_event(struct xhci_hcd *xhci)
irqreturn_t xhci_irq(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- u32 status, irq_pending;
+ u32 status;
union xhci_trb *trb;
u64 temp_64;
union xhci_trb *event_ring_deq;
@@ -2024,17 +2024,15 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
trb = xhci->event_ring->dequeue;
/* Check if the xHC generated the interrupt, or the irq is shared */
status = xhci_readl(xhci, &xhci->op_regs->status);
- irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- if (status == 0xffffffff && irq_pending == 0xffffffff)
+ if (status == 0xffffffff)
goto hw_died;
- if (!(status & STS_EINT) && !ER_IRQ_PENDING(irq_pending)) {
+ if (!(status & STS_EINT)) {
spin_unlock(&xhci->lock);
xhci_warn(xhci, "Spurious interrupt.\n");
return IRQ_NONE;
}
xhci_dbg(xhci, "op reg status = %08x\n", status);
- xhci_dbg(xhci, "ir set irq_pending = %08x\n", irq_pending);
xhci_dbg(xhci, "Event ring dequeue ptr:\n");
xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
(unsigned long long)
@@ -2063,9 +2061,13 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
/* FIXME when MSI-X is supported and there are multiple vectors */
/* Clear the MSI-X event interrupt status */
- /* Acknowledge the interrupt */
- irq_pending |= 0x3;
- xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
+ if (hcd->irq != -1) {
+ u32 irq_pending;
+ /* Acknowledge the PCI interrupt */
+ irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ irq_pending |= 0x3;
+ xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
+ }
if (xhci->xhc_state & XHCI_STATE_DYING) {
xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
--
GitLab
From ed3f24539209826235debaec66ca0da708b5bb89 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:13:17 -0700
Subject: [PATCH 850/863] USB: xhci: Don't flush doorbell writes.
To tell the host controller that there are transfers on the endpoint
rings, we need to ring the endpoint doorbell. This is a PCI MMIO write,
which can be delayed until another register read is queued.
The previous code would flush the doorbell write by reading the doorbell
register after the write. This may take time, and it's not necessary to
force the host controller to know about the transfers right away. Don't
flush the doorbell register writes.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-ring.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6860e9f097bb3..bc3f4f4270659 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -337,11 +337,6 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
field = xhci_readl(xhci, db_addr) & DB_MASK;
field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id);
xhci_writel(xhci, field, db_addr);
- /* Flush PCI posted writes - FIXME Matthew Wilcox says this
- * isn't time-critical and we shouldn't make the CPU wait for
- * the flush.
- */
- xhci_readl(xhci, db_addr);
}
}
--
GitLab
From 006d5820b41b298328e6b6085e4d58129fbc78f0 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu, 29 Jul 2010 22:13:22 -0700
Subject: [PATCH 851/863] USB: xhci: Set DMA mask for host.
Tell the USB core that we can do DMA directly (instead of needing it to
memory-map the buffers for PIO). If the xHCI host supports 64-bit addresses,
set the DMA mask accordingly. Otherwise indicate the host can handle 32-bit DMA
addresses.
This improves performance because the USB core doesn't have to spend time
remapping buffers in high memory into the 32-bit address range.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/xhci-pci.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 11482b6b93815..f7efe025bedab 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -53,6 +53,7 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval;
+ u32 temp;
hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
@@ -93,6 +94,14 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
return retval;
xhci_dbg(xhci, "Reset complete\n");
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ if (HCC_64BIT_ADDR(temp)) {
+ xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+ dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+ } else {
+ dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+ }
+
xhci_dbg(xhci, "Calling HCD init\n");
/* Initialize HCD and host controller data structures. */
retval = xhci_init(hcd);
--
GitLab
From e10e1bec8e6654de4591ef45ddd6a6d1e5b2591c Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 2 Aug 2010 22:09:01 +0800
Subject: [PATCH 852/863] USB: usbtest: avoid to free coherent buffer in atomic
context
This patch fixes the warning below:
[30753.755998] ------------[ cut here ]------------
[30753.755998] WARNING: at /home/tom/git/linux-2.6/linux-2.6-next/arch/x86/include/asm/dma-mapping.h:155 hcd_buffer_free+0xb1/0xd4 [usbcore]()
[30753.755998] Hardware name: 6475EK2
[30753.755998] Modules linked in: uvcvideo ehci_hcd usbtest cdc_ether usbnet vfat fat usb_storage nfsd lockd nfs_acl auth_rpcgss exportfs mii tun videodev v4l1_compat v4l2_compat_ioctl32 fuse bridge stp llc sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf kvm_intel kvm arc4 ecb ath5k usbhid mac80211 snd_hda_codec_conexant ch341 usbserial ath cfg80211 thinkpad_acpi snd_hda_intel pcspkr wmi hwmon yenta_socket iTCO_wdt iTCO_vendor_support i2c_i801 e1000e snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc pata_acpi uhci_hcd ohci_hcd usbcore i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: uvcvideo]
[30753.755998] Pid: 0, comm: swapper Tainted: G W 2.6.35-rc6-gkh-wl+ #49
[30753.755998] Call Trace:
[30753.755998] <IRQ> [<ffffffff8104478a>] warn_slowpath_common+0x80/0x98
[30753.755998] [<ffffffff810447b7>] warn_slowpath_null+0x15/0x17
[30753.755998] [<ffffffffa00ce02d>] hcd_buffer_free+0xb1/0xd4 [usbcore]
[30753.755998] [<ffffffffa00c1345>] usb_free_coherent+0x1c/0x1e [usbcore]
[30753.755998] [<ffffffffa00b13e4>] simple_free_urb+0x23/0x2f [usbtest]
[30753.755998] [<ffffffffa00b210b>] iso_callback+0xbb/0x10f [usbtest]
[30753.755998] [<ffffffffa00c7390>] usb_hcd_giveback_urb+0x8c/0xc0 [usbcore]
[30753.755998] [<ffffffffa0449b35>] ehci_urb_done+0x84/0x95 [ehci_hcd]
[30753.755998] [<ffffffffa044b5a5>] ehci_work+0x41a/0x7dd [ehci_hcd]
[30753.755998] [<ffffffffa044e298>] ehci_irq+0x33b/0x370 [ehci_hcd]
[30753.755998] [<ffffffff8100fb05>] ? sched_clock+0x9/0xd
[30753.755998] [<ffffffff8105e641>] ? sched_clock_local+0x1c/0x82
[30753.755998] [<ffffffff8105e76a>] ? sched_clock_cpu+0xc3/0xce
[30753.755998] [<ffffffff81067c7e>] ? trace_hardirqs_off+0xd/0xf
[30753.755998] [<ffffffff8105e7b8>] ? cpu_clock+0x43/0x5e
[30753.755998] [<ffffffffa00c6999>] usb_hcd_irq+0x45/0xa1 [usbcore]
[30753.755998] [<ffffffff81092e02>] handle_IRQ_event+0x20/0xa5
[30753.755998] [<ffffffff81094cea>] handle_fasteoi_irq+0x92/0xd2
[30753.755998] [<ffffffff8100c0ed>] handle_irq+0x1f/0x2a
[30753.755998] [<ffffffff8100b75d>] do_IRQ+0x57/0xbe
[30753.755998] [<ffffffff8136a693>] ret_from_intr+0x0/0x16
[30753.755998] <EOI> [<ffffffff81223baa>] ? acpi_idle_enter_bm+0x231/0x269
[30753.755998] [<ffffffff81223ba3>] ? acpi_idle_enter_bm+0x22a/0x269
[30753.755998] [<ffffffff812c4b6b>] cpuidle_idle_call+0x99/0xce
[30753.755998] [<ffffffff81008dd5>] cpu_idle+0x61/0xaa
[30753.755998] [<ffffffff8136374b>] start_secondary+0x1c2/0x1c6
[30753.755998] ---[ end trace 904cfaf7ab4cb1a2 ]---
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/misc/usbtest.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 0cfbd789ddf27..d92b7ec9a230d 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1378,7 +1378,6 @@ static void iso_callback (struct urb *urb)
break;
}
}
- simple_free_urb (urb);
ctx->pending--;
if (ctx->pending == 0) {
@@ -1495,6 +1494,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
}
simple_free_urb (urbs [i]);
+ urbs[i] = NULL;
context.pending--;
context.submit_error = 1;
break;
@@ -1504,6 +1504,10 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
wait_for_completion (&context.done);
+ for (i = 0; i < param->sglen; i++) {
+ if (urbs[i])
+ simple_free_urb(urbs[i]);
+ }
/*
* Isochronous transfers are expected to fail sometimes. As an
* arbitrary limit, we will report an error if any submissions
--
GitLab
From 951fd8ee6a9493f80bc5bccf2c8cfa1535c6ce15 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 2 Aug 2010 22:09:17 +0800
Subject: [PATCH 853/863] USB: usbtest: support test device with only one
iso-in or iso-out endpoint
It is very common that one altsetting may include only one iso-in or iso-out
single endpoint, especially for high bandwidth endpoint, so support it.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/misc/usbtest.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index d92b7ec9a230d..eef370eb7a54d 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -136,7 +136,7 @@ get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf)
iso_out = e;
}
}
- if ((in && out) || (iso_in && iso_out))
+ if ((in && out) || iso_in || iso_out)
goto found;
}
return -EINVAL;
@@ -162,6 +162,9 @@ get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf)
dev->in_iso_pipe = usb_rcvisocpipe (udev,
iso_in->desc.bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK);
+ }
+
+ if (iso_out) {
dev->iso_out = &iso_out->desc;
dev->out_iso_pipe = usb_sndisocpipe (udev,
iso_out->desc.bEndpointAddress
--
GitLab
From b3e670443b7fb8a2d29831b62b44a039c283e351 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Tue, 3 Aug 2010 02:32:28 +0200
Subject: [PATCH 854/863] USB: fix thread-unsafe anchor utiliy routines
This patch fixes a race condition in two utility routines
related to the removal/unlinking of urbs from an anchor.
If two threads are concurrently accessing the same anchor,
both could end up with the same urb - thinking they are
the exclusive owner.
Alan Stern pointed out a related issue in
usb_unlink_anchored_urbs:
"The URB isn't removed from the anchor until it completes
(as a by-product of completion, in fact), which might not
be for quite some time after the unlink call returns.
In the meantime, the subroutine will keep trying to unlink
it, over and over again."
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/urb.c | 50 ++++++++++++++++++------------------------
1 file changed, 21 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7c0555548ac86..419e6b34e2fe7 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -137,6 +137,16 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
}
EXPORT_SYMBOL_GPL(usb_anchor_urb);
+/* Callers must hold anchor->lock */
+static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
+{
+ urb->anchor = NULL;
+ list_del(&urb->anchor_list);
+ usb_put_urb(urb);
+ if (list_empty(&anchor->urb_list))
+ wake_up(&anchor->wait);
+}
+
/**
* usb_unanchor_urb - unanchors an URB
* @urb: pointer to the urb to anchor
@@ -156,17 +166,14 @@ void usb_unanchor_urb(struct urb *urb)
return;
spin_lock_irqsave(&anchor->lock, flags);
- if (unlikely(anchor != urb->anchor)) {
- /* we've lost the race to another thread */
- spin_unlock_irqrestore(&anchor->lock, flags);
- return;
- }
- urb->anchor = NULL;
- list_del(&urb->anchor_list);
+ /*
+ * At this point, we could be competing with another thread which
+ * has the same intention. To protect the urb from being unanchored
+ * twice, only the winner of the race gets the job.
+ */
+ if (likely(anchor == urb->anchor))
+ __usb_unanchor_urb(urb, anchor);
spin_unlock_irqrestore(&anchor->lock, flags);
- usb_put_urb(urb);
- if (list_empty(&anchor->urb_list))
- wake_up(&anchor->wait);
}
EXPORT_SYMBOL_GPL(usb_unanchor_urb);
@@ -749,20 +756,11 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);
void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
- unsigned long flags;
- spin_lock_irqsave(&anchor->lock, flags);
- while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb,
- anchor_list);
- usb_get_urb(victim);
- spin_unlock_irqrestore(&anchor->lock, flags);
- /* this will unanchor the URB */
+ while ((victim = usb_get_from_anchor(anchor)) != NULL) {
usb_unlink_urb(victim);
usb_put_urb(victim);
- spin_lock_irqsave(&anchor->lock, flags);
}
- spin_unlock_irqrestore(&anchor->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
@@ -799,12 +797,11 @@ struct urb *usb_get_from_anchor(struct usb_anchor *anchor)
victim = list_entry(anchor->urb_list.next, struct urb,
anchor_list);
usb_get_urb(victim);
- spin_unlock_irqrestore(&anchor->lock, flags);
- usb_unanchor_urb(victim);
+ __usb_unanchor_urb(victim, anchor);
} else {
- spin_unlock_irqrestore(&anchor->lock, flags);
victim = NULL;
}
+ spin_unlock_irqrestore(&anchor->lock, flags);
return victim;
}
@@ -826,12 +823,7 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
while (!list_empty(&anchor->urb_list)) {
victim = list_entry(anchor->urb_list.prev, struct urb,
anchor_list);
- usb_get_urb(victim);
- spin_unlock_irqrestore(&anchor->lock, flags);
- /* this may free the URB */
- usb_unanchor_urb(victim);
- usb_put_urb(victim);
- spin_lock_irqsave(&anchor->lock, flags);
+ __usb_unanchor_urb(victim, anchor);
}
spin_unlock_irqrestore(&anchor->lock, flags);
}
--
GitLab
From b409214c683ed06c26e2cdad0be546ad11463354 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Thu, 5 Aug 2010 13:12:14 -0400
Subject: [PATCH 855/863] USB: remove fake "address-of" expressions
Fake "address-of" expressions that evaluate to NULL generally confuse
readers and can provoke compiler warnings. This patch (as1412)
removes three such fake expressions, using "#ifdef"s in their place.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/driver.c | 6 ++----
drivers/usb/core/usb.c | 6 ++----
drivers/usb/host/uhci-debug.c | 3 +--
drivers/usb/host/uhci-hcd.c | 23 ++++++++++-------------
4 files changed, 15 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 880f65baf5813..d7a4401ef0192 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1791,15 +1791,13 @@ static const struct dev_pm_ops usb_bus_pm_ops = {
.runtime_idle = usb_runtime_idle,
};
-#else
-
-#define usb_bus_pm_ops (*(const struct dev_pm_ops *) NULL)
-
#endif /* CONFIG_USB_SUSPEND */
struct bus_type usb_bus_type = {
.name = "usb",
.match = usb_device_match,
.uevent = usb_uevent,
+#ifdef CONFIG_USB_SUSPEND
.pm = &usb_bus_pm_ops,
+#endif
};
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 5ae14f6c1e7ac..fdd4130fbb7d7 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -317,10 +317,6 @@ static const struct dev_pm_ops usb_device_pm_ops = {
.restore = usb_dev_restore,
};
-#else
-
-#define usb_device_pm_ops (*(struct dev_pm_ops *) NULL)
-
#endif /* CONFIG_PM */
@@ -338,7 +334,9 @@ struct device_type usb_device_type = {
.release = usb_release_dev,
.uevent = usb_dev_uevent,
.devnode = usb_devnode,
+#ifdef CONFIG_PM
.pm = &usb_device_pm_ops,
+#endif
};
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index c168999722d14..6e7fb5f38db63 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -17,7 +17,6 @@
#include "uhci-hcd.h"
-#define uhci_debug_operations (* (const struct file_operations *) NULL)
static struct dentry *uhci_debugfs_root;
#ifdef DEBUG
@@ -558,7 +557,6 @@ static int uhci_debug_release(struct inode *inode, struct file *file)
return 0;
}
-#undef uhci_debug_operations
static const struct file_operations uhci_debug_operations = {
.owner = THIS_MODULE,
.open = uhci_debug_open,
@@ -566,6 +564,7 @@ static const struct file_operations uhci_debug_operations = {
.read = uhci_debug_read,
.release = uhci_debug_release,
};
+#define UHCI_DEBUG_OPS
#endif /* CONFIG_DEBUG_FS */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index b04506036b642..f52d04db28f47 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -597,7 +597,7 @@ static int uhci_start(struct usb_hcd *hcd)
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int retval = -EBUSY;
int i;
- struct dentry *dentry;
+ struct dentry __maybe_unused *dentry;
hcd->uses_new_polling = 1;
@@ -607,18 +607,16 @@ static int uhci_start(struct usb_hcd *hcd)
INIT_LIST_HEAD(&uhci->idle_qh_list);
init_waitqueue_head(&uhci->waitqh);
- if (DEBUG_CONFIGURED) {
- dentry = debugfs_create_file(hcd->self.bus_name,
- S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
- uhci, &uhci_debug_operations);
- if (!dentry) {
- dev_err(uhci_dev(uhci), "couldn't create uhci "
- "debugfs entry\n");
- retval = -ENOMEM;
- goto err_create_debug_entry;
- }
- uhci->dentry = dentry;
+#ifdef UHCI_DEBUG_OPS
+ dentry = debugfs_create_file(hcd->self.bus_name,
+ S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
+ uhci, &uhci_debug_operations);
+ if (!dentry) {
+ dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
+ return -ENOMEM;
}
+ uhci->dentry = dentry;
+#endif
uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
UHCI_NUMFRAMES * sizeof(*uhci->frame),
@@ -732,7 +730,6 @@ static int uhci_start(struct usb_hcd *hcd)
err_alloc_frame:
debugfs_remove(uhci->dentry);
-err_create_debug_entry:
return retval;
}
--
GitLab
From b58af4066d240b18b43f202e07b9ec7461d90b17 Mon Sep 17 00:00:00 2001
From: Johan Hovold <jhovold@gmail.com>
Date: Wed, 4 Aug 2010 15:45:57 +0200
Subject: [PATCH 856/863] USB: serial: fix stalled writes
As David VomLehn points out, it was possible to receive an interrupt
before clearing the free-urb flag which could lead to the urb being
incorrectly marked as busy.
For the same reason, move tx_bytes accounting so that it will never be
negative.
Note that the free-flags set and clear operations do not need any
additional locking as they are manipulated while USB_SERIAL_WRITE_BUSY
is set.
Reported-by: David VomLehn <dvomlehn@cisco.com>
Tested-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/generic.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index a817ced82835a..ca92f67747cc2 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -208,18 +208,23 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port)
urb->transfer_buffer_length = count;
usb_serial_debug_data(debug, &port->dev, __func__, count,
urb->transfer_buffer);
+ spin_lock_irqsave(&port->lock, flags);
+ port->tx_bytes += count;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ clear_bit(i, &port->write_urbs_free);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - error submitting urb: %d\n",
__func__, result);
+ set_bit(i, &port->write_urbs_free);
+ spin_lock_irqsave(&port->lock, flags);
+ port->tx_bytes -= count;
+ spin_unlock_irqrestore(&port->lock, flags);
+
clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
return result;
}
- clear_bit(i, &port->write_urbs_free);
-
- spin_lock_irqsave(&port->lock, flags);
- port->tx_bytes += count;
- spin_unlock_irqrestore(&port->lock, flags);
/* Try sending off another urb, unless in irq context (in which case
* there will be no free urb). */
--
GitLab
From aca0fa34bdaba39bfddddba8ca70dba4782e8fe6 Mon Sep 17 00:00:00 2001
From: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Date: Mon, 9 Aug 2010 15:57:38 -0500
Subject: [PATCH 857/863] jfs: don't allow os2 xattr namespace overlap with
others
It's currently possible to bypass xattr namespace access rules by
prefixing valid xattr names with "os2.", since the os2 namespace stores
extended attributes in a legacy format with no prefix.
This patch adds checking to deny access to any valid namespace prefix
following "os2.".
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Reported-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
fs/jfs/xattr.c | 87 ++++++++++++++++++++++----------------------------
1 file changed, 38 insertions(+), 49 deletions(-)
diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c
index fa96bbb263434..2d7f165d0f1d0 100644
--- a/fs/jfs/xattr.c
+++ b/fs/jfs/xattr.c
@@ -86,46 +86,25 @@ struct ea_buffer {
#define EA_MALLOC 0x0008
+static int is_known_namespace(const char *name)
+{
+ if (strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN) &&
+ strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) &&
+ strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) &&
+ strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
+ return false;
+
+ return true;
+}
+
/*
* These three routines are used to recognize on-disk extended attributes
* that are in a recognized namespace. If the attribute is not recognized,
* "os2." is prepended to the name
*/
-static inline int is_os2_xattr(struct jfs_ea *ea)
+static int is_os2_xattr(struct jfs_ea *ea)
{
- /*
- * Check for "system."
- */
- if ((ea->namelen >= XATTR_SYSTEM_PREFIX_LEN) &&
- !strncmp(ea->name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
- return false;
- /*
- * Check for "user."
- */
- if ((ea->namelen >= XATTR_USER_PREFIX_LEN) &&
- !strncmp(ea->name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
- return false;
- /*
- * Check for "security."
- */
- if ((ea->namelen >= XATTR_SECURITY_PREFIX_LEN) &&
- !strncmp(ea->name, XATTR_SECURITY_PREFIX,
- XATTR_SECURITY_PREFIX_LEN))
- return false;
- /*
- * Check for "trusted."
- */
- if ((ea->namelen >= XATTR_TRUSTED_PREFIX_LEN) &&
- !strncmp(ea->name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
- return false;
- /*
- * Add any other valid namespace prefixes here
- */
-
- /*
- * We assume it's OS/2's flat namespace
- */
- return true;
+ return !is_known_namespace(ea->name);
}
static inline int name_size(struct jfs_ea *ea)
@@ -764,13 +743,23 @@ static int can_set_xattr(struct inode *inode, const char *name,
if (!strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
return can_set_system_xattr(inode, name, value, value_len);
+ if (!strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN)) {
+ /*
+ * This makes sure that we aren't trying to set an
+ * attribute in a different namespace by prefixing it
+ * with "os2."
+ */
+ if (is_known_namespace(name + XATTR_OS2_PREFIX_LEN))
+ return -EOPNOTSUPP;
+ return 0;
+ }
+
/*
* Don't allow setting an attribute in an unknown namespace.
*/
if (strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) &&
strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) &&
- strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) &&
- strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN))
+ strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
return -EOPNOTSUPP;
return 0;
@@ -952,19 +941,8 @@ ssize_t __jfs_getxattr(struct inode *inode, const char *name, void *data,
int xattr_size;
ssize_t size;
int namelen = strlen(name);
- char *os2name = NULL;
char *value;
- if (strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN) == 0) {
- os2name = kmalloc(namelen - XATTR_OS2_PREFIX_LEN + 1,
- GFP_KERNEL);
- if (!os2name)
- return -ENOMEM;
- strcpy(os2name, name + XATTR_OS2_PREFIX_LEN);
- name = os2name;
- namelen -= XATTR_OS2_PREFIX_LEN;
- }
-
down_read(&JFS_IP(inode)->xattr_sem);
xattr_size = ea_get(inode, &ea_buf, 0);
@@ -1002,8 +980,6 @@ ssize_t __jfs_getxattr(struct inode *inode, const char *name, void *data,
out:
up_read(&JFS_IP(inode)->xattr_sem);
- kfree(os2name);
-
return size;
}
@@ -1012,6 +988,19 @@ ssize_t jfs_getxattr(struct dentry *dentry, const char *name, void *data,
{
int err;
+ if (strncmp(name, XATTR_OS2_PREFIX, XATTR_OS2_PREFIX_LEN) == 0) {
+ /*
+ * skip past "os2." prefix
+ */
+ name += XATTR_OS2_PREFIX_LEN;
+ /*
+ * Don't allow retrieving properly prefixed attributes
+ * by prepending them with "os2."
+ */
+ if (is_known_namespace(name))
+ return -EOPNOTSUPP;
+ }
+
err = __jfs_getxattr(dentry->d_inode, name, data, buf_size);
return err;
--
GitLab
From 3d2be54bab7efd97b642838b9c883869ca5b98be Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 9 Aug 2010 16:28:30 -0700
Subject: [PATCH 858/863] docbook: fix fatal error from libata
'make htmldocs' has a fatal error when processing libata.xml, as seen
below. The string "Example patterns:" (or any string with "example.*:"
in it AFAIK) causes some part of the doc generation tool chain to try to
produce an <informalexample> block without a beginning <para>, but
there is an ending </para> generated, which throws things out of kilter.
I don't even know where (what program) this is happening in.
I searched in docproc and xmlto and in some XML stylesheets without
finding anything. If anyone can give me pointers about this, please do.
Until this is fixed, let's just spell "Example" as "Sample"
and match up the double quotation marks while there.
Documentation/DocBook/libata.xml:6575: parser error : Opening and ending tag mismatch: programlisting line 6573 and para
</para><para>
^
Documentation/DocBook/libata.xml:6580: parser error : Opening and ending tag mismatch: para line 6575 and programlisting
</programlisting></informalexample>
^
unable to parse Documentation/DocBook/libata.xml
make[2]: *** [Documentation/DocBook/libata.html] Error 1
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
drivers/ata/libata-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4972fdf4bd31a..7ef7c4f216fa5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4281,7 +4281,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
* The special characters ?, [, -, or *, can be matched using a set, eg. [*]
* Behaviour with malformed patterns is undefined, though generally reasonable.
*
- * Example patterns: "SD1?", "SD1[0-5]", "*R0", SD*1?[012]*xx"
+ * Sample patterns: "SD1?", "SD1[0-5]", "*R0", "SD*1?[012]*xx"
*
* This function uses one level of recursion per '*' in pattern.
* Since it calls _nothing_ else, and has _no_ explicit local variables,
--
GitLab
From 0f7436a5b09d9c6d67ed272be9641af003b1b3b2 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 9 Aug 2010 16:30:40 -0700
Subject: [PATCH 859/863] docbook: fixup media support files for htmldocs also
'make htmldocs' produces errors due to missing a supporting media
file, so add 'xmldoclinks' to the htmldocs dependencies so that the
needed supporting file will be present.
Documentation/DocBook/media.xml:4: warning: failed to load external entity "Documentation/DocBook/media-entities.tmpl"
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
Documentation/DocBook/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index c7e5dc7e8cb34..4b603c5c3cc16 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -45,7 +45,7 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
pdfdocs: $(PDF)
HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: $(HTML)
+htmldocs: $(HTML) xmldoclinks
$(call build_main_index)
$(call build_images)
--
GitLab
From 0caa621065b2cc05d4e53655a34fd989f500b040 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 9 Aug 2010 16:32:50 -0700
Subject: [PATCH 860/863] kernel/timer.c: fix kernel-doc function parameter
warning
Fix kernel-doc warning, add @timer description:
Warning(kernel/timer.c:335): No description found for parameter 'timer'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
kernel/timer.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/timer.c b/kernel/timer.c
index f1b8afe1ad86b..97bf05baade7c 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -326,6 +326,7 @@ EXPORT_SYMBOL_GPL(round_jiffies_up_relative);
/**
* set_timer_slack - set the allowed slack for a timer
+ * @timer: the timer to be modified
* @slack_hz: the amount of time (in jiffies) allowed for rounding
*
* Set the amount of time, in jiffies, that a certain timer has
--
GitLab
From 72d2e9f9f90ccafdce1f0a4a9eaabfb031f86def Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 9 Aug 2010 16:37:16 -0700
Subject: [PATCH 861/863] i2c.h: fix kernel-doc warnings
Fix kernel-doc warnings in linux/i2c.h:
Warning(include/linux/i2c.h:176): No description found for parameter 'alert'
Warning(include/linux/i2c.h:259): No description found for parameter 'of_node'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
include/linux/i2c.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 21067b4185366..38dd4025aa4e4 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -108,6 +108,7 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
* @shutdown: Callback for device shutdown
* @suspend: Callback for device suspend
* @resume: Callback for device resume
+ * @alert: Alert callback, for example for the SMBus alert protocol
* @command: Callback for bus-wide signaling (optional)
* @driver: Device driver model driver
* @id_table: List of I2C devices supported by this driver
@@ -233,6 +234,7 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
* @addr: stored in i2c_client.addr
* @platform_data: stored in i2c_client.dev.platform_data
* @archdata: copied into i2c_client.dev.archdata
+ * @of_node: pointer to OpenFirmware device node
* @irq: stored in i2c_client.irq
*
* I2C doesn't actually support hardware probing, although controllers and
--
GitLab
From 20d7b2415c55aece840048e1e01348daa8f646b0 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Tue, 10 Aug 2010 08:21:50 -0700
Subject: [PATCH 862/863] power: Remove owner field from attribute
initialization code in OLPC driver
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
drivers/power/olpc_battery.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index baefcf1cffc9c..5ab9109b69e66 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -384,7 +384,6 @@ static struct bin_attribute olpc_bat_eeprom = {
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = 0,
.read = olpc_bat_eeprom_read,
--
GitLab
From 8cbd84f2dd4e52a8771b191030c374ba3e56d291 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 10 Aug 2010 15:35:10 -0700
Subject: [PATCH 863/863] x86: fix up system call numbering nit
As pointed out by Jiri Slaby: when I resolved the the 32-bit x85 system
call entry tables for prlimit (due to the conflict with fanotify), I
forgot to add the numbering in comments that we do for every fifth entry.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
arch/x86/ia32/ia32entry.S | 2 +-
arch/x86/kernel/syscall_table_32.S | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 91dc4bb130321..b86feabed69bf 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -844,5 +844,5 @@ ia32_sys_call_table:
.quad compat_sys_recvmmsg
.quad sys_fanotify_init
.quad sys32_fanotify_mark
- .quad sys_prlimit64
+ .quad sys_prlimit64 /* 340 */
ia32_syscall_end:
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 4802accb9d8d0..b35786dc9b8f1 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -339,4 +339,4 @@ ENTRY(sys_call_table)
.long sys_recvmmsg
.long sys_fanotify_init
.long sys_fanotify_mark
- .long sys_prlimit64
+ .long sys_prlimit64 /* 340 */
--
GitLab