From a7e7b928049f8782b039f055422631406b534f7e Mon Sep 17 00:00:00 2001
From: Raju Rangoju <Raju.Rangoju@amd.com>
Date: Wed, 22 Nov 2023 00:44:35 +0530
Subject: [PATCH] amd-xgbe: propagate the correct speed and duplex status
[ Upstream commit 7a2323ac24a50311f64a3a9b54ed5bef5821ecae ]
xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.
Address this by propagating correct information.
Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index a880f10e3e703..d74f45ce06864 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -314,10 +314,15 @@ static int xgbe_get_link_ksettings(struct net_device *netdev,
cmd->base.phy_address = pdata->phy.address;
- cmd->base.autoneg = pdata->phy.autoneg;
- cmd->base.speed = pdata->phy.speed;
- cmd->base.duplex = pdata->phy.duplex;
+ if (netif_carrier_ok(netdev)) {
+ cmd->base.speed = pdata->phy.speed;
+ cmd->base.duplex = pdata->phy.duplex;
+ } else {
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
+ }
+ cmd->base.autoneg = pdata->phy.autoneg;
cmd->base.port = PORT_NONE;
XGBE_LM_COPY(cmd, supported, lks, supported);
--
GitLab