diff --git a/arch/metag/include/asm/metag_isa.h b/arch/metag/include/asm/metag_isa.h
new file mode 100644
index 0000000000000000000000000000000000000000..c8aa2ae3899f41ae7d4bbf51d1fd4722a0d0b35d
--- /dev/null
+++ b/arch/metag/include/asm/metag_isa.h
@@ -0,0 +1,81 @@
+/*
+ * asm/metag_isa.h
+ *
+ * Copyright (C) 2000-2007, 2012 Imagination Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * Various defines for Meta instruction set.
+ */
+
+#ifndef _ASM_METAG_ISA_H_
+#define _ASM_METAG_ISA_H_
+
+
+/* L1 cache layout */
+
+/* Data cache line size as bytes and shift */
+#define DCACHE_LINE_BYTES 64
+#define DCACHE_LINE_S 6
+
+/* Number of ways in the data cache */
+#define DCACHE_WAYS 4
+
+/* Instruction cache line size as bytes and shift */
+#define ICACHE_LINE_BYTES 64
+#define ICACHE_LINE_S 6
+
+/* Number of ways in the instruction cache */
+#define ICACHE_WAYS 4
+
+
+/*
+ * CACHEWD/CACHEWL instructions use the bottom 8 bits of the data presented to
+ * control the operation actually achieved.
+ */
+/* Use of these two bits should be discouraged since the bits dont have
+ * consistent meanings
+ */
+#define CACHEW_ICACHE_BIT 0x01
+#define CACHEW_TLBFLUSH_BIT 0x02
+
+#define CACHEW_FLUSH_L1D_L2 0x0
+#define CACHEW_INVALIDATE_L1I 0x1
+#define CACHEW_INVALIDATE_L1DTLB 0x2
+#define CACHEW_INVALIDATE_L1ITLB 0x3
+#define CACHEW_WRITEBACK_L1D_L2 0x4
+#define CACHEW_INVALIDATE_L1D 0x8
+#define CACHEW_INVALIDATE_L1D_L2 0xC
+
+/*
+ * CACHERD/CACHERL instructions use bits 3:5 of the address presented to
+ * control the operation achieved and hence the specific result.
+ */
+#define CACHER_ADDR_BITS 0xFFFFFFC0
+#define CACHER_OPER_BITS 0x00000030
+#define CACHER_OPER_S 4
+#define CACHER_OPER_LINPHY 0
+#define CACHER_ICACHE_BIT 0x00000008
+#define CACHER_ICACHE_S 3
+
+/*
+ * CACHERD/CACHERL LINPHY Oper result is one/two 32-bit words
+ *
+ * If CRLINPHY0_VAL_BIT (Bit 0) set then,
+ * Lower 32-bits corresponds to MMCU_ENTRY_* above.
+ * Upper 32-bits corresponds to CRLINPHY1_* values below (if requested).
+ * else
+ * Lower 32-bits corresponds to CRLINPHY0_* values below.
+ * Upper 32-bits undefined.
+ */
+#define CRLINPHY0_VAL_BIT 0x00000001
+#define CRLINPHY0_FIRST_BIT 0x00000004 /* Set if VAL=0 due to first level */
+
+#define CRLINPHY1_READ_BIT 0x00000001 /* Set if reads permitted */
+#define CRLINPHY1_SINGLE_BIT 0x00000004 /* Set if TLB does not cache entry */
+#define CRLINPHY1_PAGEMSK_BITS 0x0000FFF0 /* Set to ((2^n-1)>>12) value */
+#define CRLINPHY1_PAGEMSK_S 4
+
+#endif /* _ASM_METAG_ISA_H_ */
diff --git a/arch/metag/include/asm/metag_regs.h b/arch/metag/include/asm/metag_regs.h
new file mode 100644
index 0000000000000000000000000000000000000000..022fcad768f763c52c319f637afee1382474bc4a
--- /dev/null
+++ b/arch/metag/include/asm/metag_regs.h
@@ -0,0 +1,1180 @@
+/*
+ * asm/metag_regs.h
+ *
+ * Copyright (C) 2000-2007, 2012 Imagination Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * Various defines for Meta core (non memory-mapped) registers.
+ */
+
+#ifndef _ASM_METAG_REGS_H_
+#define _ASM_METAG_REGS_H_
+
+/*
+ * CHIP Unit Identifiers and Valid/Global register number masks
+ * ------------------------------------------------------------
+ */
+#define TXUCT_ID 0x0 /* Control unit regs */
+#ifdef METAC_1_2
+#define TXUCT_MASK 0xFF0FFFFF /* Valid regs 0..31 */
+#else
+#define TXUCT_MASK 0xFF1FFFFF /* Valid regs 0..31 */
+#endif
+#define TGUCT_MASK 0x00000000 /* No global regs */
+#define TXUD0_ID 0x1 /* Data unit regs */
+#define TXUD1_ID 0x2
+#define TXUDX_MASK 0xFFFFFFFF /* Valid regs 0..31 */
+#define TGUDX_MASK 0xFFFF0000 /* Global regs for base inst */
+#define TXUDXDSP_MASK 0x0F0FFFFF /* Valid DSP regs */
+#define TGUDXDSP_MASK 0x0E0E0000 /* Global DSP ACC regs */
+#define TXUA0_ID 0x3 /* Address unit regs */
+#define TXUA1_ID 0x4
+#define TXUAX_MASK 0x0000FFFF /* Valid regs 0-15 */
+#define TGUAX_MASK 0x0000FF00 /* Global regs 8-15 */
+#define TXUPC_ID 0x5 /* PC registers */
+#define TXUPC_MASK 0x00000003 /* Valid regs 0- 1 */
+#define TGUPC_MASK 0x00000000 /* No global regs */
+#define TXUPORT_ID 0x6 /* Ports are not registers */
+#define TXUTR_ID 0x7
+#define TXUTR_MASK 0x0000005F /* Valid regs 0-3,4,6 */
+#define TGUTR_MASK 0x00000000 /* No global regs */
+#ifdef METAC_2_1
+#define TXUTT_ID 0x8
+#define TXUTT_MASK 0x0000000F /* Valid regs 0-3 */
+#define TGUTT_MASK 0x00000010 /* Global reg 4 */
+#define TXUFP_ID 0x9 /* FPU regs */
+#define TXUFP_MASK 0x0000FFFF /* Valid regs 0-15 */
+#define TGUFP_MASK 0x00000000 /* No global regs */
+#endif /* METAC_2_1 */
+
+#ifdef METAC_1_2
+#define TXUXX_MASKS { TXUCT_MASK, TXUDX_MASK, TXUDX_MASK, TXUAX_MASK, \
+ TXUAX_MASK, TXUPC_MASK, 0, TXUTR_MASK, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
+#define TGUXX_MASKS { TGUCT_MASK, TGUDX_MASK, TGUDX_MASK, TGUAX_MASK, \
+ TGUAX_MASK, TGUPC_MASK, 0, TGUTR_MASK, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
+#else /* METAC_1_2 */
+#define TXUXX_MASKS { TXUCT_MASK, TXUDX_MASK, TXUDX_MASK, TXUAX_MASK, \
+ TXUAX_MASK, TXUPC_MASK, 0, TXUTR_MASK, \
+ TXUTT_MASK, TXUFP_MASK, 0, 0, \
+ 0, 0, 0, 0 }
+#define TGUXX_MASKS { TGUCT_MASK, TGUDX_MASK, TGUDX_MASK, TGUAX_MASK, \
+ TGUAX_MASK, TGUPC_MASK, 0, TGUTR_MASK, \
+ TGUTT_MASK, TGUFP_MASK, 0, 0, \
+ 0, 0, 0, 0 }
+#endif /* !METAC_1_2 */
+
+#define TXUXXDSP_MASKS { 0, TXUDXDSP_MASK, TXUDXDSP_MASK, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
+#define TGUXXDSP_MASKS { 0, TGUDXDSP_MASK, TGUDXDSP_MASK, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
+
+/* -------------------------------------------------------------------------
+; DATA AND ADDRESS UNIT REGISTERS
+; -----------------------------------------------------------------------*/
+/*
+ Thread local D0 registers
+ */
+/* D0.0 ; Holds 32-bit result, can be used as scratch */
+#define D0Re0 D0.0
+/* D0.1 ; Used to pass Arg6_32 */
+#define D0Ar6 D0.1
+/* D0.2 ; Used to pass Arg4_32 */
+#define D0Ar4 D0.2
+/* D0.3 ; Used to pass Arg2_32 to a called routine (see D1.3 below) */
+#define D0Ar2 D0.3
+/* D0.4 ; Can be used as scratch; used to save A0FrP in entry sequences */
+#define D0FrT D0.4
+/* D0.5 ; C compiler assumes preservation, save with D1.5 if used */
+/* D0.6 ; C compiler assumes preservation, save with D1.6 if used */
+/* D0.7 ; C compiler assumes preservation, save with D1.7 if used */
+/* D0.8 ; Use of D0.8 and above is not encouraged */
+/* D0.9 */
+/* D0.10 */
+/* D0.11 */
+/* D0.12 */
+/* D0.13 */
+/* D0.14 */
+/* D0.15 */
+/*
+ Thread local D1 registers
+ */
+/* D1.0 ; Holds top 32-bits of 64-bit result, can be used as scratch */
+#define D1Re0 D1.0
+/* D1.1 ; Used to pass Arg5_32 */
+#define D1Ar5 D1.1
+/* D1.2 ; Used to pass Arg3_32 */
+#define D1Ar3 D1.2
+/* D1.3 ; Used to pass Arg1_32 (first 32-bit argument) to a called routine */
+#define D1Ar1 D1.3
+/* D1.4 ; Used for Return Pointer, save during entry with A0FrP (via D0.4) */
+#define D1RtP D1.4
+/* D1.5 ; C compiler assumes preservation, save if used */
+/* D1.6 ; C compiler assumes preservation, save if used */
+/* D1.7 ; C compiler assumes preservation, save if used */
+/* D1.8 ; Use of D1.8 and above is not encouraged */
+/* D1.9 */
+/* D1.10 */
+/* D1.11 */
+/* D1.12 */
+/* D1.13 */
+/* D1.14 */
+/* D1.15 */
+/*
+ Thread local A0 registers
+ */
+/* A0.0 ; Primary stack pointer */
+#define A0StP A0.0
+/* A0.1 ; Used as local frame pointer in C, save if used (via D0.4) */
+#define A0FrP A0.1
+/* A0.2 */
+/* A0.3 */
+/* A0.4 ; Use of A0.4 and above is not encouraged */
+/* A0.5 */
+/* A0.6 */
+/* A0.7 */
+/*
+ Thread local A1 registers
+ */
+/* A1.0 ; Global static chain pointer - do not modify */
+#define A1GbP A1.0
+/* A1.1 ; Local static chain pointer in C, can be used as scratch */
+#define A1LbP A1.1
+/* A1.2 */
+/* A1.3 */
+/* A1.4 ; Use of A1.4 and above is not encouraged */
+/* A1.5 */
+/* A1.6 */
+/* A1.7 */
+#ifdef METAC_2_1
+/* Renameable registers for use with Fast Interrupts */
+/* The interrupt stack pointer (usually a global register) */
+#define A0IStP A0IReg
+/* The interrupt global pointer (usually a global register) */
+#define A1IGbP A1IReg
+#endif
+/*
+ Further registers may be globally allocated via linkage/loading tools,
+ normally they are not used.
+ */
+/*-------------------------------------------------------------------------
+; STACK STRUCTURE and CALLING CONVENTION
+; -----------------------------------------------------------------------*/
+/*
+; Calling convention indicates that the following is the state of the
+; stack frame at the start of a routine-
+;
+; Arg9_32 [A0StP+#-12]
+; Arg8_32 [A0StP+#- 8]
+; Arg7_32 [A0StP+#- 4]
+; A0StP->
+;
+; Registers D1.3, D0.3, ..., to D0.1 are used to pass Arg1_32 to Arg6_32
+; respectively. If a routine needs to store them on the stack in order
+; to make sub-calls or because of the general complexity of the routine it
+; is best to dump these registers immediately at the start of a routine
+; using a MSETL or SETL instruction-
+;
+; MSETL [A0StP],D0Ar6,D0Ar4,D0Ar2; Only dump argments expected
+;or SETL [A0StP+#8++],D0Ar2 ; Up to two 32-bit args expected
+;
+; For non-leaf routines it is always necessary to save and restore at least
+; the return address value D1RtP on the stack. Also by convention if the
+; frame is saved then a new A0FrP value must be set-up. So for non-leaf
+; routines at this point both these registers must be saved onto the stack
+; using a SETL instruction and the new A0FrP value is then set-up-
+;
+; MOV D0FrT,A0FrP
+; ADD A0FrP,A0StP,#0
+; SETL [A0StP+#8++],D0FrT,D1RtP
+;
+; Registers D0.5, D1.5, to D1.7 are assumed to be preserved across calls so
+; a SETL or MSETL instruction can be used to save the current state
+; of these registers if they are modified by the current routine-
+;
+; MSETL [A0StP],D0.5,D0.6,D0.7 ; Only save registers modified
+;or SETL [A0StP+#8++],D0.5 ; Only D0.5 and/or D1.5 modified
+;
+; All of the above sequences can be combined into one maximal case-
+;
+; MOV D0FrT,A0FrP ; Save and calculate new frame pointer
+; ADD A0FrP,A0StP,#(ARS)
+; MSETL [A0StP],D0Ar6,D0Ar4,D0Ar2,D0FrT,D0.5,D0.6,D0.7
+;
+; Having completed the above sequence the only remaining task on routine
+; entry is to reserve any local and outgoing argment storage space on the
+; stack. This instruction may be omitted if the size of this region is zero-
+;
+; ADD A0StP,A0StP,#(LCS)
+;
+; LCS is the first example use of one of a number of standard local defined
+; values that can be created to make assembler code more readable and
+; potentially more robust-
+;
+; #define ARS 0x18 ; Register arg bytes saved on stack
+; #define FRS 0x20 ; Frame save area size in bytes
+; #define LCS 0x00 ; Locals and Outgoing arg size
+; #define ARO (LCS+FRS) ; Stack offset to access args
+;
+; All of the above defines should be undefined (#undef) at the end of each
+; routine to avoid accidental use in the next routine.
+;
+; Given all of the above the following stack structure is expected during
+; the body of a routine if all args passed in registers are saved during
+; entry-
+;
+; ; 'Incoming args area'
+; Arg10_32 [A0StP+#-((10*4)+ARO)] Arg9_32 [A0StP+#-(( 9*4)+ARO)]
+; Arg8_32 [A0StP+#-(( 8*4)+ARO)] Arg7_32 [A0StP+#-(( 7*4)+ARO)]
+;--- Call point
+; D0Ar6= Arg6_32 [A0StP+#-(( 6*4)+ARO)] D1Ar5=Arg5_32 [A0StP+#-(( 5*4)+ARO)]
+; D0Ar4= Arg4_32 [A0StP+#-(( 4*4)+ARO)] D1Ar3=Arg3_32 [A0StP+#-(( 3*4)+ARO)]
+; D0Ar2= Arg2_32 [A0StP+#-(( 2*4)+ARO)] D1Ar2=Arg1_32 [A0StP+#-(( 1*4)+ARO)]
+; ; 'Frame area'
+; A0FrP-> D0FrT, D1RtP,
+; D0.5, D1.5,
+; D0.6, D1.6,
+; D0.7, D1.7,
+; ; 'Locals area'
+; Loc0_32 [A0StP+# (( 0*4)-LCS)], Loc1_32 [A0StP+# (( 1*4)-LCS)]
+; .... other locals
+; Locn_32 [A0StP+# (( n*4)-LCS)]
+; ; 'Outgoing args area'
+; Outm_32 [A0StP+#- ( m*4)] .... other outgoing args
+; Out8_32 [A0StP+#- ( 1*4)] Out7_32 [A0StP+#- ( 1*4)]
+; A0StP-> (Out1_32-Out6_32 in regs D1Ar1-D0Ar6)
+;
+; The exit sequence for a non-leaf routine can use the frame pointer created
+; in the entry sequence to optimise the recovery of the full state-
+;
+; MGETL D0FrT,D0.5,D0.6,D0.7,[A0FrP]
+; SUB A0StP,A0FrP,#(ARS+FRS)
+; MOV A0FrP,D0FrT
+; MOV PC,D1RtP
+;
+; Having described the most complex non-leaf case above, it is worth noting
+; that if a routine is a leaf and does not use any of the caller-preserved
+; state. The routine can be implemented as-
+;
+; ADD A0StP,A0StP,#LCS
+; .... body of routine
+; SUB A0StP,A0StP,#LCS
+; MOV PC,D1RtP
+;
+; The stack adjustments can also be omitted if no local storage is required.
+;
+; Another exit sequence structure is more applicable if for a leaf routine
+; with no local frame pointer saved/generated in which the call saved
+; registers need to be saved and restored-
+;
+; MSETL [A0StP],D0.5,D0.6,D0.7 ; Hence FRS is 0x18, ARS is 0x00
+; ADD A0StP,A0StP,#LCS
+; .... body of routine
+; GETL D0.5,D1.5,[A0StP+#((0*8)-(FRS+LCS))]
+; GETL D0.6,D1.6,[A0StP+#((1*8)-(FRS+LCS))]
+; GETL D0.7,D1.7,[A0StP+#((2*8)-(FRS+LCS))]
+; SUB A0StP,A0StP,#(ARS+FRS+LCS)
+; MOV PC,D1RtP
+;
+; Lastly, to support profiling assembler code should use a fixed entry/exit
+; sequence if the trigger define _GMON_ASM is defined-
+;
+; #ifndef _GMON_ASM
+; ... optimised entry code
+; #else
+; ; Profiling entry case
+; MOV D0FrT,A0FrP ; Save and calculate new frame pointer
+; ADD A0FrP,A0StP,#(ARS)
+; MSETL [A0StP],...,D0FrT,... or SETL [A0FrP],D0FrT,D1RtP
+; CALLR D0FrT,_mcount_wrapper
+; #endif
+; ... body of routine
+; #ifndef _GMON_ASM
+; ... optimised exit code
+; #else
+; ; Profiling exit case
+; MGETL D0FrT,...,[A0FrP] or GETL D0FrT,D1RtP,[A0FrP++]
+; SUB A0StP,A0FrP,#(ARS+FRS)
+; MOV A0FrP,D0FrT
+; MOV PC,D1RtP
+; #endif
+
+
+; -------------------------------------------------------------------------
+; CONTROL UNIT REGISTERS
+; -------------------------------------------------------------------------
+;
+; See the assembler guide, hardware documentation, or the field values
+; defined below for some details of the use of these registers.
+*/
+#define TXENABLE CT.0 /* Need to define bit-field values in these */
+#define TXMODE CT.1
+#define TXSTATUS CT.2 /* DEFAULT 0x00020000 */
+#define TXRPT CT.3
+#define TXTIMER CT.4
+#define TXL1START CT.5
+#define TXL1END CT.6
+#define TXL1COUNT CT.7
+#define TXL2START CT.8
+#define TXL2END CT.9
+#define TXL2COUNT CT.10
+#define TXBPOBITS CT.11
+#define TXMRSIZE CT.12
+#define TXTIMERI CT.13
+#define TXDRCTRL CT.14 /* DEFAULT 0x0XXXF0F0 */
+#define TXDRSIZE CT.15
+#define TXCATCH0 CT.16
+#define TXCATCH1 CT.17
+#define TXCATCH2 CT.18
+#define TXCATCH3 CT.19
+
+#ifdef METAC_2_1
+#define TXDEFR CT.20
+#define TXCPRS CT.21
+#endif
+
+#define TXINTERN0 CT.23
+#define TXAMAREG0 CT.24
+#define TXAMAREG1 CT.25
+#define TXAMAREG2 CT.26
+#define TXAMAREG3 CT.27
+#define TXDIVTIME CT.28 /* DEFAULT 0x00000001 */
+#define TXPRIVEXT CT.29 /* DEFAULT 0x003B0000 */
+#define TXTACTCYC CT.30
+#define TXIDLECYC CT.31
+
+/*****************************************************************************
+ * CONTROL UNIT REGISTER BITS
+ ****************************************************************************/
+/*
+ * The following registers and where appropriate the sub-fields of those
+ * registers are defined for pervasive use in controlling program flow.
+ */
+
+/*
+ * TXENABLE register fields - only the thread id is routinely useful
+ */
+#define TXENABLE_REGNUM 0
+#define TXENABLE_THREAD_BITS 0x00000700
+#define TXENABLE_THREAD_S 8
+#define TXENABLE_REV_STEP_BITS 0x000000F0
+#define TXENABLE_REV_STEP_S 4
+
+/*
+ * TXMODE register - controls extensions of the instruction set
+ */
+#define TXMODE_REGNUM 1
+#define TXMODE_DEFAULT 0 /* All fields default to zero */
+
+/*
+ * TXSTATUS register - contains a couple of stable bits that can be used
+ * to determine the privilege processing level and interrupt
+ * processing level of the current thread.
+ */
+#define TXSTATUS_REGNUM 2
+#define TXSTATUS_PSTAT_BIT 0x00020000 /* -> Privilege active */
+#define TXSTATUS_PSTAT_S 17
+#define TXSTATUS_ISTAT_BIT 0x00010000 /* -> In interrupt state */
+#define TXSTATUS_ISTAT_S 16
+
+/*
+ * These are all relatively boring registers, mostly full 32-bit
+ */
+#define TXRPT_REGNUM 3 /* Repeat counter for XFR... instructions */
+#define TXTIMER_REGNUM 4 /* Timer-- causes timer trigger on overflow */
+#define TXL1START_REGNUM 5 /* Hardware Loop 1 Start-PC/End-PC/Count */
+#define TXL1END_REGNUM 6
+#define TXL1COUNT_REGNUM 7
+#define TXL2START_REGNUM 8 /* Hardware Loop 2 Start-PC/End-PC/Count */
+#define TXL2END_REGNUM 9
+#define TXL2COUNT_REGNUM 10
+#define TXBPOBITS_REGNUM 11 /* Branch predict override bits - tune perf */
+#define TXTIMERI_REGNUM 13 /* Timer-- time based interrupt trigger */
+
+/*
+ * TXDIVTIME register is routinely read to calculate the time-base for
+ * the TXTIMER register.
+ */
+#define TXDIVTIME_REGNUM 28
+#define TXDIVTIME_DIV_BITS 0x000000FF
+#define TXDIVTIME_DIV_S 0
+#define TXDIVTIME_DIV_MIN 0x00000001 /* Maximum resolution */
+#define TXDIVTIME_DIV_MAX 0x00000100 /* 1/1 -> 1/256 resolution */
+#define TXDIVTIME_BASE_HZ 1000000 /* Timers run at 1Mhz @1/1 */
+
+/*
+ * TXPRIVEXT register can be consulted to decide if write access to a
+ * part of the threads register set is not permitted when in
+ * unprivileged mode (PSTAT == 0).
+ */
+#define TXPRIVEXT_REGNUM 29
+#define TXPRIVEXT_COPRO_BITS 0xFF000000 /* Co-processor 0-7 */
+#define TXPRIVEXT_COPRO_S 24
+#define TXPRIVEXT_TXTRIGGER_BIT 0x00020000 /* TXSTAT|TXMASK|TXPOLL */
+#define TXPRIVEXT_TXGBLCREG_BIT 0x00010000 /* Global common regs */
+#define TXPRIVEXT_CBPRIV_BIT 0x00008000 /* Mem i/f dump priv */
+#define TXPRIVEXT_ILOCK_BIT 0x00004000 /* LOCK inst priv */
+#define TXPRIVEXT_TXITACCYC_BIT 0x00002000 /* TXIDLECYC|TXTACTCYC */
+#define TXPRIVEXT_TXDIVTIME_BIT 0x00001000 /* TXDIVTIME priv */
+#define TXPRIVEXT_TXAMAREGX_BIT 0x00000800 /* TXAMAREGX priv */
+#define TXPRIVEXT_TXTIMERI_BIT 0x00000400 /* TXTIMERI priv */
+#define TXPRIVEXT_TXSTATUS_BIT 0x00000200 /* TXSTATUS priv */
+#define TXPRIVEXT_TXDISABLE_BIT 0x00000100 /* TXENABLE priv */
+#ifndef METAC_1_2
+#define TXPRIVEXT_MINIMON_BIT 0x00000080 /* Enable Minim features */
+#define TXPRIVEXT_OLDBCCON_BIT 0x00000020 /* Restore Static predictions */
+#define TXPRIVEXT_ALIGNREW_BIT 0x00000010 /* Align & precise checks */
+#endif
+#define TXPRIVEXT_KEEPPRI_BIT 0x00000008 /* Use AMA_Priority if ISTAT=1*/
+#define TXPRIVEXT_TXTOGGLEI_BIT 0x00000001 /* TX.....I priv */
+
+/*
+ * TXTACTCYC register - counts instructions issued for this thread
+ */
+#define TXTACTCYC_REGNUM 30
+#define TXTACTCYC_COUNT_MASK 0x00FFFFFF
+
+/*
+ * TXIDLECYC register - counts idle cycles
+ */
+#define TXIDLECYC_REGNUM 31
+#define TXIDLECYC_COUNT_MASK 0x00FFFFFF
+
+/*****************************************************************************
+ * DSP EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following values relate to fields and controls that only a program
+ * using the DSP extensions of the META instruction set need to know.
+ */
+
+
+#ifndef METAC_1_2
+/*
+ * Allow co-processor hardware to replace the read pipeline data source in
+ * appropriate cases.
+ */
+#define TXMODE_RDCPEN_BIT 0x00800000
+#endif
+
+/*
+ * Address unit addressing modes
+ */
+#define TXMODE_A1ADDR_BITS 0x00007000
+#define TXMODE_A1ADDR_S 12
+#define TXMODE_A0ADDR_BITS 0x00000700
+#define TXMODE_A0ADDR_S 8
+#define TXMODE_AXADDR_MODULO 3
+#define TXMODE_AXADDR_REVB 4
+#define TXMODE_AXADDR_REVW 5
+#define TXMODE_AXADDR_REVD 6
+#define TXMODE_AXADDR_REVL 7
+
+/*
+ * Data unit OverScale select (default 0 -> normal, 1 -> top 16 bits)
+ */
+#define TXMODE_DXOVERSCALE_BIT 0x00000080
+
+/*
+ * Data unit MX mode select (default 0 -> MX16, 1 -> MX8)
+ */
+#define TXMODE_M8_BIT 0x00000040
+
+/*
+ * Data unit accumulator saturation point (default -> 40 bit accumulator)
+ */
+#define TXMODE_DXACCSAT_BIT 0x00000020 /* Set for 32-bit accumulator */
+
+/*
+ * Data unit accumulator saturation enable (default 0 -> no saturation)
+ */
+#define TXMODE_DXSAT_BIT 0x00000010
+
+/*
+ * Data unit master rounding control (default 0 -> normal, 1 -> convergent)
+ */
+#define TXMODE_DXROUNDING_BIT 0x00000008
+
+/*
+ * Data unit product shift for fractional arithmetic (default off)
+ */
+#define TXMODE_DXPRODSHIFT_BIT 0x00000004
+
+/*
+ * Select the arithmetic mode (multiply mostly) for both data units
+ */
+#define TXMODE_DXARITH_BITS 0x00000003
+#define TXMODE_DXARITH_32 3
+#define TXMODE_DXARITH_32H 2
+#define TXMODE_DXARITH_S16 1
+#define TXMODE_DXARITH_16 0
+
+/*
+ * TXMRSIZE register value only relevant when DSP modulo addressing active
+ */
+#define TXMRSIZE_REGNUM 12
+#define TXMRSIZE_MIN 0x0002 /* 0, 1 -> normal addressing logic */
+#define TXMRSIZE_MAX 0xFFFF
+
+/*
+ * TXDRCTRL register can be used to detect the actaul size of the DSP RAM
+ * partitions allocated to this thread.
+ */
+#define TXDRCTRL_REGNUM 14
+#define TXDRCTRL_SINESIZE_BITS 0x0F000000
+#define TXDRCTRL_SINESIZE_S 24
+#define TXDRCTRL_RAMSZPOW_BITS 0x001F0000 /* Limit = (1<<RAMSZPOW)-1 */
+#define TXDRCTRL_RAMSZPOW_S 16
+#define TXDRCTRL_D1RSZAND_BITS 0x0000F000 /* Mask top 4 bits - D1 */
+#define TXDRCTRL_D1RSZAND_S 12
+#define TXDRCTRL_D0RSZAND_BITS 0x000000F0 /* Mask top 4 bits - D0 */
+#define TXDRCTRL_D0RSZAND_S 4
+/* Given extracted RAMSZPOW and DnRSZAND fields this returns the size */
+#define TXDRCTRL_DXSIZE(Pow, AndBits) \
+ ((((~(AndBits)) & 0x0f) + 1) << ((Pow)-4))
+
+/*
+ * TXDRSIZE register provides modulo addressing options for each DSP RAM
+ */
+#define TXDRSIZE_REGNUM 15
+#define TXDRSIZE_R1MOD_BITS 0xFFFF0000
+#define TXDRSIZE_R1MOD_S 16
+#define TXDRSIZE_R0MOD_BITS 0x0000FFFF
+#define TXDRSIZE_R0MOD_S 0
+
+#define TXDRSIZE_RBRAD_SCALE_BITS 0x70000000
+#define TXDRSIZE_RBRAD_SCALE_S 28
+#define TXDRSIZE_RBMODSIZE_BITS 0x0FFF0000
+#define TXDRSIZE_RBMODSIZE_S 16
+#define TXDRSIZE_RARAD_SCALE_BITS 0x00007000
+#define TXDRSIZE_RARAD_SCALE_S 12
+#define TXDRSIZE_RAMODSIZE_BITS 0x00000FFF
+#define TXDRSIZE_RAMODSIZE_S 0
+
+/*****************************************************************************
+ * DEFERRED and BUS ERROR EXTENSION
+ ****************************************************************************/
+
+/*
+ * TXDEFR register - Deferred exception control
+ */
+#define TXDEFR_REGNUM 20
+#define TXDEFR_DEFAULT 0 /* All fields default to zero */
+
+/*
+ * Bus error state is a multi-bit positive/negative event notification from
+ * the bus infrastructure.
+ */
+#define TXDEFR_BUS_ERR_BIT 0x80000000 /* Set if error (LSB STATE) */
+#define TXDEFR_BUS_ERRI_BIT 0x40000000 /* Fetch returned error */
+#define TXDEFR_BUS_STATE_BITS 0x3F000000 /* Bus event/state data */
+#define TXDEFR_BUS_STATE_S 24
+#define TXDEFR_BUS_TRIG_BIT 0x00800000 /* Set when bus error seen */
+
+/*
+ * Bus events are collected by background code in a deferred manner unless
+ * selected to trigger an extended interrupt HALT trigger when they occur.
+ */
+#define TXDEFR_BUS_ICTRL_BIT 0x00000080 /* Enable interrupt trigger */
+
+/*
+ * CHIP Automatic Mips Allocation control registers
+ * ------------------------------------------------
+ */
+
+/* CT Bank AMA Registers */
+#define TXAMAREG0_REGNUM 24
+#ifdef METAC_1_2
+#define TXAMAREG0_CTRL_BITS 0x07000000
+#else /* METAC_1_2 */
+#define TXAMAREG0_RCOFF_BIT 0x08000000
+#define TXAMAREG0_DLINEHLT_BIT 0x04000000
+#define TXAMAREG0_DLINEDIS_BIT 0x02000000
+#define TXAMAREG0_CYCSTRICT_BIT 0x01000000
+#define TXAMAREG0_CTRL_BITS (TXAMAREG0_RCOFF_BIT | \
+ TXAMAREG0_DLINEHLT_BIT | \
+ TXAMAREG0_DLINEDIS_BIT | \
+ TXAMAREG0_CYCSTRICT_BIT)
+#endif /* !METAC_1_2 */
+#define TXAMAREG0_CTRL_S 24
+#define TXAMAREG0_MDM_BIT 0x00400000
+#define TXAMAREG0_MPF_BIT 0x00200000
+#define TXAMAREG0_MPE_BIT 0x00100000
+#define TXAMAREG0_MASK_BITS (TXAMAREG0_MDM_BIT | \
+ TXAMAREG0_MPF_BIT | \
+ TXAMAREG0_MPE_BIT)
+#define TXAMAREG0_MASK_S 20
+#define TXAMAREG0_SDM_BIT 0x00040000
+#define TXAMAREG0_SPF_BIT 0x00020000
+#define TXAMAREG0_SPE_BIT 0x00010000
+#define TXAMAREG0_STATUS_BITS (TXAMAREG0_SDM_BIT | \
+ TXAMAREG0_SPF_BIT | \
+ TXAMAREG0_SPE_BIT)
+#define TXAMAREG0_STATUS_S 16
+#define TXAMAREG0_PRIORITY_BITS 0x0000FF00
+#define TXAMAREG0_PRIORITY_S 8
+#define TXAMAREG0_BVALUE_BITS 0x000000FF
+#define TXAMAREG0_BVALUE_S 0
+
+#define TXAMAREG1_REGNUM 25
+#define TXAMAREG1_DELAYC_BITS 0x07FFFFFF
+#define TXAMAREG1_DELAYC_S 0
+
+#define TXAMAREG2_REGNUM 26
+#ifdef METAC_1_2
+#define TXAMAREG2_DLINEC_BITS 0x00FFFFFF
+#define TXAMAREG2_DLINEC_S 0
+#else /* METAC_1_2 */
+#define TXAMAREG2_IRQPRIORITY_BIT 0xFF000000
+#define TXAMAREG2_IRQPRIORITY_S 24
+#define TXAMAREG2_DLINEC_BITS 0x00FFFFF0
+#define TXAMAREG2_DLINEC_S 4
+#endif /* !METAC_1_2 */
+
+#define TXAMAREG3_REGNUM 27
+#define TXAMAREG2_AMABLOCK_BIT 0x00080000
+#define TXAMAREG2_AMAC_BITS 0x0000FFFF
+#define TXAMAREG2_AMAC_S 0
+
+/*****************************************************************************
+ * FPU EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following registers only exist in FPU enabled cores.
+ */
+
+/*
+ * TXMODE register - FPU rounding mode control/status fields
+ */
+#define TXMODE_FPURMODE_BITS 0x00030000
+#define TXMODE_FPURMODE_S 16
+#define TXMODE_FPURMODEWRITE_BIT 0x00040000 /* Set to change FPURMODE */
+
+/*
+ * TXDEFR register - FPU exception handling/state is a significant source
+ * of deferrable errors. Run-time S/W can move handling to interrupt level
+ * using DEFR instruction to collect state.
+ */
+#define TXDEFR_FPE_FE_BITS 0x003F0000 /* Set by FPU_FE events */
+#define TXDEFR_FPE_FE_S 16
+
+#define TXDEFR_FPE_INEXACT_FE_BIT 0x010000
+#define TXDEFR_FPE_UNDERFLOW_FE_BIT 0x020000
+#define TXDEFR_FPE_OVERFLOW_FE_BIT 0x040000
+#define TXDEFR_FPE_DIVBYZERO_FE_BIT 0x080000
+#define TXDEFR_FPE_INVALID_FE_BIT 0x100000
+#define TXDEFR_FPE_DENORMAL_FE_BIT 0x200000
+
+#define TXDEFR_FPE_ICTRL_BITS 0x000003F /* Route to interrupts */
+#define TXDEFR_FPE_ICTRL_S 0
+
+#define TXDEFR_FPE_INEXACT_ICTRL_BIT 0x01
+#define TXDEFR_FPE_UNDERFLOW_ICTRL_BIT 0x02
+#define TXDEFR_FPE_OVERFLOW_ICTRL_BIT 0x04
+#define TXDEFR_FPE_DIVBYZERO_ICTRL_BIT 0x08
+#define TXDEFR_FPE_INVALID_ICTRL_BIT 0x10
+#define TXDEFR_FPE_DENORMAL_ICTRL_BIT 0x20
+
+/*
+ * DETAILED FPU RELATED VALUES
+ * ---------------------------
+ */
+
+/*
+ * Rounding mode field in TXMODE can hold a number of logical values
+ */
+#define METAG_FPURMODE_TONEAREST 0x0 /* Default */
+#define METAG_FPURMODE_TOWARDZERO 0x1
+#define METAG_FPURMODE_UPWARD 0x2
+#define METAG_FPURMODE_DOWNWARD 0x3
+
+/*
+ * In order to set the TXMODE register field that controls the rounding mode
+ * an extra bit must be set in the value written versus that read in order
+ * to gate writes to the rounding mode field. This allows other non-FPU code
+ * to modify TXMODE without knowledge of the FPU units presence and not
+ * influence the FPU rounding mode. This macro adds the required bit so new
+ * rounding modes are accepted.
+ */
+#define TXMODE_FPURMODE_SET(FPURMode) \
+ (TXMODE_FPURMODEWRITE_BIT + ((FPURMode)<<TXMODE_FPURMODE_S))
+
+/*
+ * To successfully restore TXMODE to zero at the end of the function the
+ * following value (rather than zero) must be used.
+ */
+#define TXMODE_FPURMODE_RESET (TXMODE_FPURMODEWRITE_BIT)
+
+/*
+ * In TXSTATUS a special bit exists to indicate if FPU H/W has been accessed
+ * since it was last reset.
+ */
+#define TXSTATUS_FPACTIVE_BIT 0x01000000
+
+/*
+ * Exception state (see TXDEFR_FPU_FE_*) and enabling (for interrupt
+ * level processing (see TXDEFR_FPU_ICTRL_*) are controlled by similar
+ * bit mask locations within each field.
+ */
+#define METAG_FPU_FE_INEXACT 0x01
+#define METAG_FPU_FE_UNDERFLOW 0x02
+#define METAG_FPU_FE_OVERFLOW 0x04
+#define METAG_FPU_FE_DIVBYZERO 0x08
+#define METAG_FPU_FE_INVALID 0x10
+#define METAG_FPU_FE_DENORMAL 0x20
+#define METAG_FPU_FE_ALL_EXCEPT (METAG_FPU_FE_INEXACT | \
+ METAG_FPU_FE_UNDERFLOW | \
+ METAG_FPU_FE_OVERFLOW | \
+ METAG_FPU_FE_DIVBYZERO | \
+ METAG_FPU_FE_INVALID | \
+ METAG_FPU_FE_DENORMAL)
+
+/*****************************************************************************
+ * THREAD CONTROL, ERROR, OR INTERRUPT STATE EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following values are only relevant to code that externally controls
+ * threads, handles errors/interrupts, and/or set-up interrupt/error handlers
+ * for subsequent use.
+ */
+
+/*
+ * TXENABLE register fields - only ENABLE_BIT is potentially read/write
+ */
+#define TXENABLE_MAJOR_REV_BITS 0xFF000000
+#define TXENABLE_MAJOR_REV_S 24
+#define TXENABLE_MINOR_REV_BITS 0x00FF0000
+#define TXENABLE_MINOR_REV_S 16
+#define TXENABLE_CLASS_BITS 0x0000F000
+#define TXENABLE_CLASS_S 12
+#define TXENABLE_CLASS_DSP 0x0 /* -> DSP Thread */
+#define TXENABLE_CLASS_LDSP 0x8 /* -> DSP LITE Thread */
+#define TXENABLE_CLASS_GP 0xC /* -> General Purpose Thread */
+#define TXENABLE_CLASSALT_LFPU 0x2 /* Set to indicate LITE FPU */
+#define TXENABLE_CLASSALT_FPUR8 0x1 /* Set to indicate 8xFPU regs */
+#define TXENABLE_MTXARCH_BIT 0x00000800
+#define TXENABLE_STEP_REV_BITS 0x000000F0
+#define TXENABLE_STEP_REV_S 4
+#define TXENABLE_STOPPED_BIT 0x00000004 /* TXOFF due to ENABLE->0 */
+#define TXENABLE_OFF_BIT 0x00000002 /* Thread is in off state */
+#define TXENABLE_ENABLE_BIT 0x00000001 /* Set if running */
+
+/*
+ * TXSTATUS register - used by external/internal interrupt/error handler
+ */
+#define TXSTATUS_CB1MARKER_BIT 0x00800000 /* -> int level mem state */
+#define TXSTATUS_CBMARKER_BIT 0x00400000 /* -> mem i/f state dumped */
+#define TXSTATUS_MEM_FAULT_BITS 0x00300000
+#define TXSTATUS_MEM_FAULT_S 20
+#define TXSTATUS_MEMFAULT_NONE 0x0 /* -> No memory fault */
+#define TXSTATUS_MEMFAULT_GEN 0x1 /* -> General fault */
+#define TXSTATUS_MEMFAULT_PF 0x2 /* -> Page fault */
+#define TXSTATUS_MEMFAULT_RO 0x3 /* -> Read only fault */
+#define TXSTATUS_MAJOR_HALT_BITS 0x000C0000
+#define TXSTATUS_MAJOR_HALT_S 18
+#define TXSTATUS_MAJHALT_TRAP 0x0 /* -> SWITCH inst used */
+#define TXSTATUS_MAJHALT_INST 0x1 /* -> Unknown inst or fetch */
+#define TXSTATUS_MAJHALT_PRIV 0x2 /* -> Internal privilege */
+#define TXSTATUS_MAJHALT_MEM 0x3 /* -> Memory i/f fault */
+#define TXSTATUS_L_STEP_BITS 0x00000800 /* -> Progress of L oper */
+#define TXSTATUS_LSM_STEP_BITS 0x00000700 /* -> Progress of L/S mult */
+#define TXSTATUS_LSM_STEP_S 8
+#define TXSTATUS_FLAG_BITS 0x0000001F /* -> All the flags */
+#define TXSTATUS_SCC_BIT 0x00000010 /* -> Split-16 flags ... */
+#define TXSTATUS_SCF_LZ_BIT 0x00000008 /* -> Split-16 Low Z flag */
+#define TXSTATUS_SCF_HZ_BIT 0x00000004 /* -> Split-16 High Z flag */
+#define TXSTATUS_SCF_HC_BIT 0x00000002 /* -> Split-16 High C flag */
+#define TXSTATUS_SCF_LC_BIT 0x00000001 /* -> Split-16 Low C flag */
+#define TXSTATUS_CF_Z_BIT 0x00000008 /* -> Condition Z flag */
+#define TXSTATUS_CF_N_BIT 0x00000004 /* -> Condition N flag */
+#define TXSTATUS_CF_O_BIT 0x00000002 /* -> Condition O flag */
+#define TXSTATUS_CF_C_BIT 0x00000001 /* -> Condition C flag */
+
+/*
+ * TXCATCH0-3 register contents may store information on a memory operation
+ * that has failed if the bit TXSTATUS_CBMARKER_BIT is set.
+ */
+#define TXCATCH0_REGNUM 16
+#define TXCATCH1_REGNUM 17
+#define TXCATCH1_ADDR_BITS 0xFFFFFFFF /* TXCATCH1 is Addr 0-31 */
+#define TXCATCH1_ADDR_S 0
+#define TXCATCH2_REGNUM 18
+#define TXCATCH2_DATA0_BITS 0xFFFFFFFF /* TXCATCH2 is Data 0-31 */
+#define TXCATCH2_DATA0_S 0
+#define TXCATCH3_REGNUM 19
+#define TXCATCH3_DATA1_BITS 0xFFFFFFFF /* TXCATCH3 is Data 32-63 */
+#define TXCATCH3_DATA1_S 0
+
+/*
+ * Detailed catch state information
+ * --------------------------------
+ */
+
+/* Contents of TXCATCH0 register */
+#define TXCATCH0_LDRXX_BITS 0xF8000000 /* Load destination reg 0-31 */
+#define TXCATCH0_LDRXX_S 27
+#define TXCATCH0_LDDST_BITS 0x07FF0000 /* Load destination bits */
+#define TXCATCH0_LDDST_S 16
+#define TXCATCH0_LDDST_D1DSP 0x400 /* One bit set if it's a LOAD */
+#define TXCATCH0_LDDST_D0DSP 0x200
+#define TXCATCH0_LDDST_TMPLT 0x100
+#define TXCATCH0_LDDST_TR 0x080
+#ifdef METAC_2_1
+#define TXCATCH0_LDDST_FPU 0x040
+#endif
+#define TXCATCH0_LDDST_PC 0x020
+#define TXCATCH0_LDDST_A1 0x010
+#define TXCATCH0_LDDST_A0 0x008
+#define TXCATCH0_LDDST_D1 0x004
+#define TXCATCH0_LDDST_D0 0x002
+#define TXCATCH0_LDDST_CT 0x001
+#ifdef METAC_2_1
+#define TXCATCH0_WATCHSTOP_BIT 0x00004000 /* Set if Data Watch set fault */
+#endif
+#define TXCATCH0_WATCHS_BIT 0x00004000 /* Set if Data Watch set fault */
+#define TXCATCH0_WATCH1_BIT 0x00002000 /* Set if Data Watch 1 matches */
+#define TXCATCH0_WATCH0_BIT 0x00001000 /* Set if Data Watch 0 matches */
+#define TXCATCH0_FAULT_BITS 0x00000C00 /* See TXSTATUS_MEMFAULT_* */
+#define TXCATCH0_FAULT_S 10
+#define TXCATCH0_PRIV_BIT 0x00000200 /* Privilege of transaction */
+#define TXCATCH0_READ_BIT 0x00000100 /* Set for Read or Load cases */
+
+#ifdef METAC_2_1
+/* LNKGET Marker bit in TXCATCH0 */
+#define TXCATCH0_LNKGET_MARKER_BIT 0x00000008
+#define TXCATCH0_PREPROC_BIT 0x00000004
+#endif
+
+/* Loads are indicated by one of the LDDST bits being set */
+#define TXCATCH0_LDM16_BIT 0x00000004 /* Load M16 flag */
+#define TXCATCH0_LDL2L1_BITS 0x00000003 /* Load data size L2,L1 */
+#define TXCATCH0_LDL2L1_S 0
+
+/* Reads are indicated by the READ bit being set without LDDST bits */
+#define TXCATCH0_RAXX_BITS 0x0000001F /* RAXX issue port for read */
+#define TXCATCH0_RAXX_S 0
+
+/* Write operations are all that remain if READ bit is not set */
+#define TXCATCH0_WMASK_BITS 0x000000FF /* Write byte lane mask */
+#define TXCATCH0_WMASK_S 0
+
+#ifdef METAC_2_1
+
+/* When a FPU exception is signalled then FPUSPEC == FPUSPEC_TAG */
+#define TXCATCH0_FPURDREG_BITS 0xF8000000
+#define TXCATCH0_FPURDREG_S 27
+#define TXCATCH0_FPUR1REG_BITS 0x07C00000
+#define TXCATCH0_FPUR1REG_S 22
+#define TXCATCH0_FPUSPEC_BITS 0x000F0000
+#define TXCATCH0_FPUSPEC_S 16
+#define TXCATCH0_FPUSPEC_TAG 0xF
+#define TXCATCH0_FPUINSTA_BIT 0x00001000
+#define TXCATCH0_FPUINSTQ_BIT 0x00000800
+#define TXCATCH0_FPUINSTZ_BIT 0x00000400
+#define TXCATCH0_FPUINSTN_BIT 0x00000200
+#define TXCATCH0_FPUINSTO3O_BIT 0x00000100
+#define TXCATCH0_FPUWIDTH_BITS 0x000000C0
+#define TXCATCH0_FPUWIDTH_S 6
+#define TXCATCH0_FPUWIDTH_FLOAT 0
+#define TXCATCH0_FPUWIDTH_DOUBLE 1
+#define TXCATCH0_FPUWIDTH_PAIRED 2
+#define TXCATCH0_FPUOPENC_BITS 0x0000003F
+#define TXCATCH0_FPUOPENC_S 0
+#define TXCATCH0_FPUOPENC_ADD 0 /* rop1=Rs1, rop3=Rs2 */
+#define TXCATCH0_FPUOPENC_SUB 1 /* rop1=Rs1, rop3=Rs2 */
+#define TXCATCH0_FPUOPENC_MUL 2 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_ATOI 3 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_ATOX 4 /* rop3=Rs, uses #Imm */
+#define TXCATCH0_FPUOPENC_ITOA 5 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_XTOA 6 /* rop3=Rs, uses #Imm */
+#define TXCATCH0_FPUOPENC_ATOH 7 /* rop2=Rs */
+#define TXCATCH0_FPUOPENC_HTOA 8 /* rop2=Rs */
+#define TXCATCH0_FPUOPENC_DTOF 9 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_FTOD 10 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_DTOL 11 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_LTOD 12 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_DTOXL 13 /* rop3=Rs, uses #imm */
+#define TXCATCH0_FPUOPENC_XLTOD 14 /* rop3=Rs, uses #imm */
+#define TXCATCH0_FPUOPENC_CMP 15 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MIN 16 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MAX 17 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_ADDRE 18 /* rop1=Rs1, rop3=Rs2 */
+#define TXCATCH0_FPUOPENC_SUBRE 19 /* rop1=Rs1, rop3=Rs2 */
+#define TXCATCH0_FPUOPENC_MULRE 20 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MXA 21 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define TXCATCH0_FPUOPENC_MXAS 22 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define TXCATCH0_FPUOPENC_MAR 23 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MARS 24 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MUZ 25 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define TXCATCH0_FPUOPENC_MUZS 26 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define TXCATCH0_FPUOPENC_RCP 27 /* rop2=Rs */
+#define TXCATCH0_FPUOPENC_RSQ 28 /* rop2=Rs */
+
+/* For floating point exceptions TXCATCH1 is used to carry extra data */
+#define TXCATCH1_FPUR2REG_BITS 0xF8000000
+#define TXCATCH1_FPUR2REG_S 27
+#define TXCATCH1_FPUR3REG_BITS 0x07C00000 /* Undefined if O3O set */
+#define TXCATCH1_FPUR3REG_S 22
+#define TXCATCH1_FPUIMM16_BITS 0x0000FFFF
+#define TXCATCH1_FPUIMM16_S 0
+
+#endif /* METAC_2_1 */
+
+/*
+ * TXDIVTIME register used to hold the partial base address of memory i/f
+ * state dump area. Now deprecated.
+ */
+#define TXDIVTIME_CBBASE_MASK 0x03FFFE00
+#define TXDIVTIME_CBBASE_LINBASE 0x80000000
+#define TXDIVTIME_CBBASE_LINBOFF 0x00000000 /* BGnd state */
+#define TXDIVTIME_CBBASE_LINIOFF 0x00000100 /* Int state */
+
+/*
+ * TXDIVTIME register used to indicate if the read pipeline was dirty when a
+ * thread was interrupted, halted, or generated an exception. It is invalid
+ * to attempt to issue a further pipeline read address while the read
+ * pipeline is in the dirty state.
+ */
+#define TXDIVTIME_RPDIRTY_BIT 0x80000000
+
+/*
+ * Further bits in the TXDIVTIME register allow interrupt handling code to
+ * short-cut the discovery the most significant bit last read from TXSTATI.
+ *
+ * This is the bit number of the trigger line that a low level interrupt
+ * handler should acknowledge and then perhaps the index of a corresponding
+ * handler function.
+ */
+#define TXDIVTIME_IRQENC_BITS 0x0F000000
+#define TXDIVTIME_IRQENC_S 24
+
+/*
+ * If TXDIVTIME_RPVALID_BIT is set the read pipeline contained significant
+ * information when the thread was interrupted|halted|exceptioned. Each slot
+ * containing data is indicated by a one bit in the corresponding
+ * TXDIVTIME_RPMASK_BITS bit (least significance bit relates to first
+ * location in read pipeline - most likely to have the 1 state). Empty slots
+ * contain zeroes with no interlock applied on reads if RPDIRTY is currently
+ * set with RPMASK itself being read-only state.
+ */
+#define TXDIVTIME_RPMASK_BITS 0x003F0000 /* -> Full (1) Empty (0) */
+#define TXDIVTIME_RPMASK_S 16
+
+/*
+ * TXPRIVEXT register can be used to single step thread execution and
+ * enforce synchronous memory i/f address checking for debugging purposes.
+ */
+#define TXPRIVEXT_TXSTEP_BIT 0x00000004
+#define TXPRIVEXT_MEMCHECK_BIT 0x00000002
+
+/*
+ * TXINTERNx registers holds internal state information for H/W debugging only
+ */
+#define TXINTERN0_REGNUM 23
+#define TXINTERN0_LOCK2_BITS 0xF0000000
+#define TXINTERN0_LOCK2_S 28
+#define TXINTERN0_LOCK1_BITS 0x0F000000
+#define TXINTERN0_LOCK1_S 24
+#define TXINTERN0_TIFDF_BITS 0x0000F000
+#define TXINTERN0_TIFDF_S 12
+#define TXINTERN0_TIFIB_BITS 0x00000F00
+#define TXINTERN0_TIFIB_S 8
+#define TXINTERN0_TIFAF_BITS 0x000000F0
+#define TXINTERN0_TIFAF_S 4
+#define TXINTERN0_MSTATE_BITS 0x0000000F
+#define TXINTERN0_MSTATE_S 0
+
+/*
+ * TXSTAT, TXMASK, TXPOLL, TXSTATI, TXMASKI, TXPOLLI registers from trigger
+ * bank all have similar contents (upper kick count bits not in MASK regs)
+ */
+#define TXSTAT_REGNUM 0
+#define TXSTAT_TIMER_BIT 0x00000001
+#define TXSTAT_TIMER_S 0
+#define TXSTAT_KICK_BIT 0x00000002
+#define TXSTAT_KICK_S 1
+#define TXSTAT_DEFER_BIT 0x00000008
+#define TXSTAT_DEFER_S 3
+#define TXSTAT_EXTTRIG_BITS 0x0000FFF0
+#define TXSTAT_EXTTRIG_S 4
+#define TXSTAT_FPE_BITS 0x003F0000
+#define TXSTAT_FPE_S 16
+#define TXSTAT_FPE_DENORMAL_BIT 0x00200000
+#define TXSTAT_FPE_DENORMAL_S 21
+#define TXSTAT_FPE_INVALID_BIT 0x00100000
+#define TXSTAT_FPE_INVALID_S 20
+#define TXSTAT_FPE_DIVBYZERO_BIT 0x00080000
+#define TXSTAT_FPE_DIVBYZERO_S 19
+#define TXSTAT_FPE_OVERFLOW_BIT 0x00040000
+#define TXSTAT_FPE_OVERFLOW_S 18
+#define TXSTAT_FPE_UNDERFLOW_BIT 0x00020000
+#define TXSTAT_FPE_UNDERFLOW_S 17
+#define TXSTAT_FPE_INEXACT_BIT 0x00010000
+#define TXSTAT_FPE_INEXACT_S 16
+#define TXSTAT_BUSERR_BIT 0x00800000 /* Set if bus error/ack state */
+#define TXSTAT_BUSERR_S 23
+#define TXSTAT_BUSSTATE_BITS 0xFF000000 /* Read only */
+#define TXSTAT_BUSSTATE_S 24
+#define TXSTAT_KICKCNT_BITS 0xFFFF0000
+#define TXSTAT_KICKCNT_S 16
+#define TXMASK_REGNUM 1
+#define TXSTATI_REGNUM 2
+#define TXSTATI_BGNDHALT_BIT 0x00000004
+#define TXMASKI_REGNUM 3
+#define TXPOLL_REGNUM 4
+#define TXPOLLI_REGNUM 6
+
+/*
+ * TXDRCTRL register can be used to partition the DSP RAM space available to
+ * this thread at startup. This is achieved by offsetting the region allocated
+ * to each thread.
+ */
+#define TXDRCTRL_D1PARTOR_BITS 0x00000F00 /* OR's into top 4 bits */
+#define TXDRCTRL_D1PARTOR_S 8
+#define TXDRCTRL_D0PARTOR_BITS 0x0000000F /* OR's into top 4 bits */
+#define TXDRCTRL_D0PARTOR_S 0
+/* Given extracted Pow and Or fields this is threads base within DSP RAM */
+#define TXDRCTRL_DXBASE(Pow, Or) ((Or)<<((Pow)-4))
+
+/*****************************************************************************
+ * RUN TIME TRACE CONTROL REGISTERS
+ ****************************************************************************/
+/*
+ * The following values are only relevant to code that implements run-time
+ * trace features within the META Core
+ */
+#define TTEXEC TT.0
+#define TTCTRL TT.1
+#define TTMARK TT.2
+#define TTREC TT.3
+#define GTEXEC TT.4
+
+#define TTEXEC_REGNUM 0
+#define TTEXEC_EXTTRIGAND_BITS 0x7F000000
+#define TTEXEC_EXTTRIGAND_S 24
+#define TTEXEC_EXTTRIGEN_BIT 0x00008000
+#define TTEXEC_EXTTRIGMATCH_BITS 0x00007F00
+#define TTEXEC_EXTTRIGMATCH_S 8
+#define TTEXEC_TCMODE_BITS 0x00000003
+#define TTEXEC_TCMODE_S 0
+
+#define TTCTRL_REGNUM 1
+#define TTCTRL_TRACETT_BITS 0x00008000
+#define TTCTRL_TRACETT_S 15
+#define TTCTRL_TRACEALL_BITS 0x00002000
+#define TTCTRL_TRACEALL_S 13
+#ifdef METAC_2_1
+#define TTCTRL_TRACEALLTAG_BITS 0x00000400
+#define TTCTRL_TRACEALLTAG_S 10
+#endif /* METAC_2_1 */
+#define TTCTRL_TRACETAG_BITS 0x00000200
+#define TTCTRL_TRACETAG_S 9
+#define TTCTRL_TRACETTPC_BITS 0x00000080
+#define TTCTRL_TRACETTPC_S 7
+#define TTCTRL_TRACEMPC_BITS 0x00000020
+#define TTCTRL_TRACEMPC_S 5
+#define TTCTRL_TRACEEN_BITS 0x00000008
+#define TTCTRL_TRACEEN_S 3
+#define TTCTRL_TRACEEN1_BITS 0x00000004
+#define TTCTRL_TRACEEN1_S 2
+#define TTCTRL_TRACEPC_BITS 0x00000002
+#define TTCTRL_TRACEPC_S 1
+
+#ifdef METAC_2_1
+#define TTMARK_REGNUM 2
+#define TTMARK_BITS 0xFFFFFFFF
+#define TTMARK_S 0x0
+
+#define TTREC_REGNUM 3
+#define TTREC_BITS 0xFFFFFFFFFFFFFFFF
+#define TTREC_S 0x0
+#endif /* METAC_2_1 */
+
+#define GTEXEC_REGNUM 4
+#define GTEXEC_DCRUN_BITS 0x80000000
+#define GTEXEC_DCRUN_S 31
+#define GTEXEC_ICMODE_BITS 0x0C000000
+#define GTEXEC_ICMODE_S 26
+#define GTEXEC_TCMODE_BITS 0x03000000
+#define GTEXEC_TCMODE_S 24
+#define GTEXEC_PERF1CMODE_BITS 0x00040000
+#define GTEXEC_PERF1CMODE_S 18
+#define GTEXEC_PERF0CMODE_BITS 0x00010000
+#define GTEXEC_PERF0CMODE_S 16
+#define GTEXEC_REFMSEL_BITS 0x0000F000
+#define GTEXEC_REFMSEL_S 12
+#define GTEXEC_METRICTH_BITS 0x000003FF
+#define GTEXEC_METRICTH_S 0
+
+#ifdef METAC_2_1
+/*
+ * Clock Control registers
+ * -----------------------
+ */
+#define TXCLKCTRL_REGNUM 22
+
+/*
+ * Default setting is with clocks always on (DEFON), turning all clocks off
+ * can only be done from external devices (OFF), enabling automatic clock
+ * gating will allow clocks to stop as units fall idle.
+ */
+#define TXCLKCTRL_ALL_OFF 0x02222222
+#define TXCLKCTRL_ALL_DEFON 0x01111111
+#define TXCLKCTRL_ALL_AUTO 0x02222222
+
+/*
+ * Individual fields control caches, floating point and main data/addr units
+ */
+#define TXCLKCTRL_CLOCKIC_BITS 0x03000000
+#define TXCLKCTRL_CLOCKIC_S 24
+#define TXCLKCTRL_CLOCKDC_BITS 0x00300000
+#define TXCLKCTRL_CLOCKDC_S 20
+#define TXCLKCTRL_CLOCKFP_BITS 0x00030000
+#define TXCLKCTRL_CLOCKFP_S 16
+#define TXCLKCTRL_CLOCKD1_BITS 0x00003000
+#define TXCLKCTRL_CLOCKD1_S 12
+#define TXCLKCTRL_CLOCKD0_BITS 0x00000300
+#define TXCLKCTRL_CLOCKD0_S 8
+#define TXCLKCTRL_CLOCKA1_BITS 0x00000030
+#define TXCLKCTRL_CLOCKA1_S 4
+#define TXCLKCTRL_CLOCKA0_BITS 0x00000003
+#define TXCLKCTRL_CLOCKA0_S 0
+
+/*
+ * Individual settings for each field are common
+ */
+#define TXCLKCTRL_CLOCKxx_OFF 0
+#define TXCLKCTRL_CLOCKxx_DEFON 1
+#define TXCLKCTRL_CLOCKxx_AUTO 2
+
+#endif /* METAC_2_1 */
+
+#ifdef METAC_2_1
+/*
+ * Fast interrupt new bits
+ * ------------------------------------
+ */
+#define TXSTATUS_IPTOGGLE_BIT 0x80000000 /* Prev PToggle of TXPRIVEXT */
+#define TXSTATUS_ISTATE_BIT 0x40000000 /* IState bit */
+#define TXSTATUS_IWAIT_BIT 0x20000000 /* wait indefinitely in decision step*/
+#define TXSTATUS_IEXCEPT_BIT 0x10000000 /* Indicate an exception occured */
+#define TXSTATUS_IRPCOUNT_BITS 0x0E000000 /* Number of 'dirty' date entries*/
+#define TXSTATUS_IRPCOUNT_S 25
+#define TXSTATUS_IRQSTAT_BITS 0x0000F000 /* IRQEnc bits, trigger or interrupts */
+#define TXSTATUS_IRQSTAT_S 12
+#define TXSTATUS_LNKSETOK_BIT 0x00000020 /* LNKSetOK bit, successful LNKSET */
+
+/* New fields in TXDE for fast interrupt system */
+#define TXDIVTIME_IACTIVE_BIT 0x00008000 /* Enable new interrupt system */
+#define TXDIVTIME_INONEST_BIT 0x00004000 /* Gate nested interrupt */
+#define TXDIVTIME_IREGIDXGATE_BIT 0x00002000 /* gate of the IRegIdex field */
+#define TXDIVTIME_IREGIDX_BITS 0x00001E00 /* Index of A0.0/1 replaces */
+#define TXDIVTIME_IREGIDX_S 9
+#define TXDIVTIME_NOST_BIT 0x00000100 /* disable superthreading bit */
+#endif
+
+#endif /* _ASM_METAG_REGS_H_ */