diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 6403f49da41946284242e432843466a7f40a0e8d..1ca88cdc6eced82ec9d84e460c0398c4c3e4f50f 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -72,6 +72,7 @@
 #define RF5370				0x5370
 #define RF5372				0x5372
 #define RF5390				0x5390
+#define RF5392				0x5392
 
 /*
  * Chipset revisions.
@@ -1945,6 +1946,11 @@ struct mac_iveiv_entry {
  */
 #define RFCSR49_TX			FIELD8(0x3f)
 
+/*
+ * RFCSR 50:
+ */
+#define RFCSR50_TX			FIELD8(0x3f)
+
 /*
  * RF registers
  */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 11488e743f08be808681d91551f6abd8f29beb35..4d3747c3010b987134199dabf09d0815f269987e 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1958,7 +1958,22 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
 	rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
 
+	if (rt2x00_rt(rt2x00dev, RT5392)) {
+		rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr);
+		if (info->default_power1 > RT5390_POWER_BOUND)
+			rt2x00_set_field8(&rfcsr, RFCSR50_TX,
+					  RT5390_POWER_BOUND);
+		else
+			rt2x00_set_field8(&rfcsr, RFCSR50_TX,
+					  info->default_power2);
+		rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
+	}
+
 	rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
+	if (rt2x00_rt(rt2x00dev, RT5392)) {
+		rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
+		rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
+	}
 	rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
 	rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
 	rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
@@ -2064,6 +2079,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	case RF5370:
 	case RF5372:
 	case RF5390:
+	case RF5392:
 		rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
 		break;
 	default:
@@ -2554,6 +2570,7 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
 	case RF5370:
 	case RF5372:
 	case RF5390:
+	case RF5392:
 		rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
 		rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
 		rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
@@ -4269,6 +4286,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	case RF5370:
 	case RF5372:
 	case RF5390:
+	case RF5392:
 		break;
 	default:
 		ERROR(rt2x00dev, "Invalid RF chipset 0x%04x detected.\n",
@@ -4583,7 +4601,8 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		   rt2x00_rf(rt2x00dev, RF5360) ||
 		   rt2x00_rf(rt2x00dev, RF5370) ||
 		   rt2x00_rf(rt2x00dev, RF5372) ||
-		   rt2x00_rf(rt2x00dev, RF5390)) {
+		   rt2x00_rf(rt2x00dev, RF5390) ||
+		   rt2x00_rf(rt2x00dev, RF5392)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals_3x;
 	} else if (rt2x00_rf(rt2x00dev, RF3052)) {
@@ -4670,6 +4689,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	case RF5370:
 	case RF5372:
 	case RF5390:
+	case RF5392:
 		__set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
 		break;
 	}