diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-port b/Documentation/ABI/testing/sysfs-platform-dfl-port
new file mode 100644
index 0000000000000000000000000000000000000000..cb91165f5397b865d33335590dfa2414849b38c4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-dfl-port
@@ -0,0 +1,7 @@
+What:		/sys/bus/platform/devices/dfl-port.0/id
+Date:		June 2018
+KernelVersion:	4.19
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. It returns id of this port. One DFL FPGA device
+		may have more than one port. Userspace could use this id to
+		distinguish different ports under same FPGA device.
diff --git a/drivers/fpga/dfl-afu-main.c b/drivers/fpga/dfl-afu-main.c
index a38d6a825e7e951da00aa626bcc2d62ce396fc1d..d36b3e9f398428efcd7d9c481bd163640e398ee5 100644
--- a/drivers/fpga/dfl-afu-main.c
+++ b/drivers/fpga/dfl-afu-main.c
@@ -16,6 +16,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/fpga-dfl.h>
 
 #include "dfl.h"
 
@@ -87,6 +88,41 @@ static int port_disable(struct platform_device *pdev)
 	return 0;
 }
 
+/*
+ * This function resets the FPGA Port and its accelerator (AFU) by function
+ * __port_disable and __port_enable (set port soft reset bit and then clear
+ * it). Userspace can do Port reset at any time, e.g. during DMA or Partial
+ * Reconfiguration. But it should never cause any system level issue, only
+ * functional failure (e.g. DMA or PR operation failure) and be recoverable
+ * from the failure.
+ *
+ * Note: the accelerator (AFU) is not accessible when its port is in reset
+ * (disabled). Any attempts on MMIO access to AFU while in reset, will
+ * result errors reported via port error reporting sub feature (if present).
+ */
+static int __port_reset(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = port_disable(pdev);
+	if (!ret)
+		port_enable(pdev);
+
+	return ret;
+}
+
+static int port_reset(struct platform_device *pdev)
+{
+	struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	int ret;
+
+	mutex_lock(&pdata->lock);
+	ret = __port_reset(pdev);
+	mutex_unlock(&pdata->lock);
+
+	return ret;
+}
+
 static int port_get_id(struct platform_device *pdev)
 {
 	void __iomem *base;
@@ -96,23 +132,63 @@ static int port_get_id(struct platform_device *pdev)
 	return FIELD_GET(PORT_CAP_PORT_NUM, readq(base + PORT_HDR_CAP));
 }
 
+static ssize_t
+id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	int id = port_get_id(to_platform_device(dev));
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", id);
+}
+static DEVICE_ATTR_RO(id);
+
+static const struct attribute *port_hdr_attrs[] = {
+	&dev_attr_id.attr,
+	NULL,
+};
+
 static int port_hdr_init(struct platform_device *pdev,
 			 struct dfl_feature *feature)
 {
 	dev_dbg(&pdev->dev, "PORT HDR Init.\n");
 
-	return 0;
+	port_reset(pdev);
+
+	return sysfs_create_files(&pdev->dev.kobj, port_hdr_attrs);
 }
 
 static void port_hdr_uinit(struct platform_device *pdev,
 			   struct dfl_feature *feature)
 {
 	dev_dbg(&pdev->dev, "PORT HDR UInit.\n");
+
+	sysfs_remove_files(&pdev->dev.kobj, port_hdr_attrs);
+}
+
+static long
+port_hdr_ioctl(struct platform_device *pdev, struct dfl_feature *feature,
+	       unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	switch (cmd) {
+	case DFL_FPGA_PORT_RESET:
+		if (!arg)
+			ret = port_reset(pdev);
+		else
+			ret = -EINVAL;
+		break;
+	default:
+		dev_dbg(&pdev->dev, "%x cmd not handled", cmd);
+		ret = -ENODEV;
+	}
+
+	return ret;
 }
 
 static const struct dfl_feature_ops port_hdr_ops = {
 	.init = port_hdr_init,
 	.uinit = port_hdr_uinit,
+	.ioctl = port_hdr_ioctl,
 };
 
 static struct dfl_feature_driver port_feature_drvs[] = {
@@ -154,6 +230,7 @@ static int afu_release(struct inode *inode, struct file *filp)
 
 	pdata = dev_get_platdata(&pdev->dev);
 
+	port_reset(pdev);
 	dfl_feature_dev_use_end(pdata);
 
 	return 0;
diff --git a/include/uapi/linux/fpga-dfl.h b/include/uapi/linux/fpga-dfl.h
index 9666af85a8f5caf042909f8cae541b7cb85a0a70..e6b4dd26cc687e40487d10dff711ead50ac5a92c 100644
--- a/include/uapi/linux/fpga-dfl.h
+++ b/include/uapi/linux/fpga-dfl.h
@@ -29,8 +29,11 @@
 #define DFL_FPGA_MAGIC 0xB6
 
 #define DFL_FPGA_BASE 0
+#define DFL_PORT_BASE 0x40
 #define DFL_FME_BASE 0x80
 
+/* Common IOCTLs for both FME and AFU file descriptor */
+
 /**
  * DFL_FPGA_GET_API_VERSION - _IO(DFL_FPGA_MAGIC, DFL_FPGA_BASE + 0)
  *
@@ -49,6 +52,20 @@
 
 #define DFL_FPGA_CHECK_EXTENSION	_IO(DFL_FPGA_MAGIC, DFL_FPGA_BASE + 1)
 
+/* IOCTLs for AFU file descriptor */
+
+/**
+ * DFL_FPGA_PORT_RESET - _IO(DFL_FPGA_MAGIC, DFL_PORT_BASE + 0)
+ *
+ * Reset the FPGA Port and its AFU. No parameters are supported.
+ * Userspace can do Port reset at any time, e.g. during DMA or PR. But
+ * it should never cause any system level issue, only functional failure
+ * (e.g. DMA or PR operation failure) and be recoverable from the failure.
+ * Return: 0 on success, -errno of failure
+ */
+
+#define DFL_FPGA_PORT_RESET		_IO(DFL_FPGA_MAGIC, DFL_PORT_BASE + 0)
+
 /* IOCTLs for FME file descriptor */
 
 /**