diff --git a/Documentation/frv/booting.txt b/Documentation/frv/booting.txt
index ace200b7c2140145c457ee86ce7f02b532c85e87..37c4d84a0e570240222ea08d95b0fb79280c29f3 100644
--- a/Documentation/frv/booting.txt
+++ b/Documentation/frv/booting.txt
@@ -106,13 +106,20 @@ separated by spaces:
       To use the first on-chip serial port at baud rate 115200, no parity, 8
       bits, and no flow control.
 
-  (*) root=/dev/<xxxx>
+  (*) root=<xxxx>
 
-      This specifies the device upon which the root filesystem resides. For
-      example:
+      This specifies the device upon which the root filesystem resides. It
+      may be specified by major and minor number, device path, or even
+      partition uuid, if supported.  For example:
 
 	/dev/nfs	NFS root filesystem
 	/dev/mtdblock3	Fourth RedBoot partition on the System Flash
+	PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=1
+		first partition after the partition with the given UUID
+	253:0		Device with major 253 and minor 0
+
+      Authoritative information can be found in
+      "Documentation/kernel-parameters.txt".
 
   (*) rw
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d57f00d1bb255bd36412bed680fa7b239ee95d21..865e39f1850c34fbeb62d938641727b08ea3e4a2 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2245,6 +2245,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	ro		[KNL] Mount root device read-only on boot
 
 	root=		[KNL] Root filesystem
+			See name_to_dev_t comment in init/do_mounts.c.
 
 	rootdelay=	[KNL] Delay (in seconds) to pause before attempting to
 			mount the root filesystem
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt
index c93bed66e25d459d36bcd8a0d1308a1fac17c6c1..97d45f276fe6e235801b8e1584c9609574d9cc4e 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.txt
@@ -129,6 +129,20 @@ decimal 11 is the major of SCSI CD-ROMs, and the minor 0 stands for
 the first of these. You can find out all valid major numbers by
 looking into include/linux/major.h.
 
+In addition to major and minor numbers, if the device containing your
+root partition uses a partition table format with unique partition
+identifiers, then you may use them.  For instance,
+"root=PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF".  It is also
+possible to reference another partition on the same device using a
+known partition UUID as the starting point.  For example,
+if partition 5 of the device has the UUID of
+00112233-4455-6677-8899-AABBCCDDEEFF then partition 3 may be found as
+follows:
+  PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=-2
+
+Authoritative information can be found in
+"Documentation/kernel-parameters.txt".
+
 
 2.2) ro, rw
 -----------