diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 559baa5c418c25e3eddd639f6fb72577b1bfbeb1..614d216dff1d9f2066c7e834d4497a32bd73a99c 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -186,7 +186,7 @@ Contact: Lan Tianyu <tianyu.lan@intel.com>
Description:
Some platforms provide usb port connect types through ACPI.
This attribute is to expose these information to user space.
- The file will read "hotplug", "wired" and "not used" if the
+ The file will read "hotplug", "hardwired" and "not used" if the
information is available, and "unknown" otherwise.
What: /sys/bus/usb/devices/.../(hub interface)/portX/location
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 879afb4a1573e5f2c45f989cc2f75cc5475656c6..a422560fbc15a7c6fb66afd85db48ed4e53e2b27 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4718,7 +4718,8 @@
usbcore.authorized_default=
[USB] Default USB device authorization:
(default -1 = authorized except for wireless USB,
- 0 = not authorized, 1 = authorized)
+ 0 = not authorized, 1 = authorized, 2 = authorized
+ if device connected to internal port)
usbcore.autosuspend=
[USB] The autosuspend time delay (in seconds) used
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 14f319f694b79a34c275020152b488b2c4550f9c..3363d9ae4e7436999d4c9bf2e6d6cf0038a672c9 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -147,6 +147,7 @@ required properties:
- compatible: Should be "atmel,<chip>-sfr", "syscon" or
"atmel,<chip>-sfrbu", "syscon"
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
+ It also can be "microchip,sam9x60-sfr", "syscon".
- reg: Should contain registers location and length
sfr@f0038000 {
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
index f5725bb6c61ca9bd6aa5cb645c4aa006e468a5e7..525a4bfd86340715d084f3a6c2f363f32797c9cc 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
@@ -31,28 +31,7 @@ Required subnodes:
- one subnode per DSI device connected on the DSI bus. Each DSI device should
contain a reg property encoding its virtual channel.
-Cadence DPHY
-============
-
-Cadence DPHY block.
-
-Required properties:
-- compatible: should be set to "cdns,dphy".
-- reg: physical base address and length of the DPHY registers.
-- clocks: DPHY reference clocks.
-- clock-names: must contain "psm" and "pll_ref".
-- #phy-cells: must be set to 0.
-
-
Example:
- dphy0: dphy@fd0e0000{
- compatible = "cdns,dphy";
- reg = <0x0 0xfd0e0000 0x0 0x1000>;
- clocks = <&psm_clk>, <&pll_ref_clk>;
- clock-names = "psm", "pll_ref";
- #phy-cells = <0>;
- };
-
dsi0: dsi@fd0c0000 {
compatible = "cdns,dsi";
reg = <0x0 0xfd0c0000 0x0 0x1000>;
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
new file mode 100644
index 0000000000000000000000000000000000000000..1095bc4e72d97081050ca39d26a851a83b149b4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
@@ -0,0 +1,20 @@
+Cadence DPHY
+============
+
+Cadence DPHY block.
+
+Required properties:
+- compatible: should be set to "cdns,dphy".
+- reg: physical base address and length of the DPHY registers.
+- clocks: DPHY reference clocks.
+- clock-names: must contain "psm" and "pll_ref".
+- #phy-cells: must be set to 0.
+
+Example:
+ dphy0: dphy@fd0e0000{
+ compatible = "cdns,dphy";
+ reg = <0x0 0xfd0e0000 0x0 0x1000>;
+ clocks = <&psm_clk>, <&pll_ref_clk>;
+ clock-names = "psm", "pll_ref";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
index bfcf80341657ce6ba39891ff10b1c9c19d775a0a..cf2cd86db2674c62cfe162675abb572f262eca84 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -1,16 +1,27 @@
-mvebu comphy driver
--------------------
+MVEBU comphy drivers
+--------------------
-A comphy controller can be found on Marvell Armada 7k/8k on the CP110. It
-provides a number of shared PHYs used by various interfaces (network, sata,
-usb, PCIe...).
+COMPHY controllers can be found on the following Marvell MVEBU SoCs:
+* Armada 7k/8k (on the CP110)
+* Armada 3700
+It provides a number of shared PHYs used by various interfaces (network, SATA,
+USB, PCIe...).
Required properties:
-- compatible: should be "marvell,comphy-cp110"
-- reg: should contain the comphy register location and length.
-- marvell,system-controller: should contain a phandle to the
- system controller node.
+- compatible: should be one of:
+ * "marvell,comphy-cp110" for Armada 7k/8k
+ * "marvell,comphy-a3700" for Armada 3700
+- reg: should contain the COMPHY register(s) location(s) and length(s).
+ * 1 entry for Armada 7k/8k
+ * 4 entries for Armada 3700 along with the corresponding reg-names
+ properties, memory areas are:
+ * Generic COMPHY registers
+ * Lane 1 (PCIe/GbE)
+ * Lane 0 (USB3/GbE)
+ * Lane 2 (SATA/USB3)
+- marvell,system-controller: should contain a phandle to the system
+ controller node (only for Armada 7k/8k)
- #address-cells: should be 1.
- #size-cells: should be 0.
@@ -18,11 +29,11 @@ A sub-node is required for each comphy lane provided by the comphy.
Required properties (child nodes):
-- reg: comphy lane number.
-- #phy-cells : from the generic phy bindings, must be 1. Defines the
+- reg: COMPHY lane number.
+- #phy-cells : from the generic PHY bindings, must be 1. Defines the
input port to use for a given comphy lane.
-Example:
+Examples:
cpm_comphy: phy@120000 {
compatible = "marvell,comphy-cp110";
@@ -41,3 +52,33 @@ Example:
#phy-cells = <1>;
};
};
+
+ comphy: phy@18300 {
+ compatible = "marvell,comphy-a3700";
+ reg = <0x18300 0x300>,
+ <0x1F000 0x400>,
+ <0x5C000 0x400>,
+ <0xe0178 0x8>;
+ reg-names = "comphy",
+ "lane1_pcie_gbe",
+ "lane0_usb3_gbe",
+ "lane2_sata_usb3";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+
+ comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ comphy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
new file mode 100644
index 0000000000000000000000000000000000000000..aa99ceec73b036892cceab32eeaa10825bdaa3ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
@@ -0,0 +1,38 @@
+MVEBU A3700 UTMI PHY
+--------------------
+
+USB2 UTMI+ PHY controllers can be found on the following Marvell MVEBU SoCs:
+* Armada 3700
+
+On Armada 3700, there are two USB controllers, one is compatible with the USB2
+and USB3 specifications and supports OTG. The other one is USB2 compliant and
+only supports host mode. Both of these controllers come with a slightly
+different UTMI PHY.
+
+Required Properties:
+
+- compatible: Should be one of:
+ * "marvell,a3700-utmi-host-phy" for the PHY connected to
+ the USB2 host-only controller.
+ * "marvell,a3700-utmi-otg-phy" for the PHY connected to
+ the USB3 and USB2 OTG capable controller.
+- reg: PHY IP register range.
+- marvell,usb-misc-reg: handle on the "USB miscellaneous registers" shared
+ region covering registers related to both the host
+ controller and the PHY.
+- #phy-cells: Standard property (Documentation: phy-bindings.txt) Should be 0.
+
+
+Example:
+
+ usb2_utmi_host_phy: phy@5f000 {
+ compatible = "marvell,armada-3700-utmi-host-phy";
+ reg = <0x5f000 0x800>;
+ marvell,usb-misc-reg = <&usb2_syscon>;
+ #phy-cells = <0>;
+ };
+
+ usb2_syscon: system-controller@5f800 {
+ compatible = "marvell,armada-3700-usb2-host-misc", "syscon";
+ reg = <0x5f800 0x800>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index 074a7b3b0425ddadac96079d0cdd83f7f9352582..00639baae74a12e744d80badbda2c0aa37b7da67 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -23,6 +23,8 @@ Optional properties:
register files". When set driver will request its
phandle as one companion-grf for some special SoCs
(e.g RV1108).
+ - extcon : phandle to the extcon device providing the cable state for
+ the otg phy.
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify host or otg port,
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 41a1074228ba7df7a626425814104698aedf647c..5d181fc3cc182d5b806dd8f4b349f346f8bd59e6 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,6 +9,8 @@ Required properties:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+ "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
+ "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
"qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
@@ -42,6 +44,10 @@ Required properties:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
+ For "qcom,msm8998-qmp-usb3-phy" must contain:
+ "aux", "cfg_ahb", "ref".
+ For "qcom,msm8998-qmp-ufs-phy" must contain:
+ "ref", "ref_aux".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
@@ -61,6 +67,9 @@ Required properties:
"phy", "common", "cfg".
For "qcom,msm8996-qmp-usb3-phy" must contain
"phy", "common".
+ For "qcom,msm8998-qmp-usb3-phy" must contain
+ "phy", "common".
+ For "qcom,msm8998-qmp-ufs-phy": no resets are listed.
For "qcom,sdm845-qmp-usb3-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index 03025d97998b48276ceec27adaa230debd9febfa..fe29f9e0af6dad61062522cef3cd45c8199a0e31 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -6,6 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
Required properties:
- compatible: compatible list, contains
"qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
+ "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998,
"qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
- reg: offset and length of the PHY register set.
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index de7b5393c16374def9ed1c9d2aae139b77e9611a..ad9c290d8f1509a7e23ae2101a919bcd57c5d42a 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -5,6 +5,8 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
+ SoC.
+ "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
SoC.
"renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 57dfda8a7a1da5cb0a4799882f75a154dd2750af..8f93c3b694a74f2fc4159dc15318435adf91c01f 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -35,6 +35,7 @@ Required properties:
DRA7x
Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
in DRA7x
+ Should be "ti,am654-usb2" for the USB2 PHYs on AM654.
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy.
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index adae82385dd6bffe4cee15648dd865e9cbc5bf72..a254386a91ad609f8e874b7101a6599b165da6ad 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -93,6 +93,7 @@ i.mx specific properties
- over-current-active-low: over current signal polarity is active low.
- over-current-active-high: over current signal polarity is active high.
It's recommended to specify the over current polarity.
+- power-active-high: power signal polarity is active high
- external-vbus-divider: enables off-chip resistor divider for Vbus
Example:
diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
new file mode 100644
index 0000000000000000000000000000000000000000..620355cee63f15862ec6b8a7759556fb53770106
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
@@ -0,0 +1,24 @@
+Ingenic JZ4740 MUSB driver
+
+Required properties:
+
+- compatible: Must be "ingenic,jz4740-musb"
+- reg: Address range of the UDC register set
+- interrupts: IRQ number related to the UDC hardware
+- interrupt-names: must be "mc"
+- clocks: phandle to the "udc" clock
+- clock-names: must be "udc"
+
+Example:
+
+udc: usb@13040000 {
+ compatible = "ingenic,jz4740-musb";
+ reg = <0x13040000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+ interrupt-names = "mc";
+
+ clocks = <&cgu JZ4740_CLK_UDC>;
+ clock-names = "udc";
+};
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index f96e09f784cc0c721dea4cb44dfa68debe27afb1..77df82e36138d0c9060a1fb12ed0dff0c26ebada 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -3,7 +3,9 @@ TI Keystone Soc USB Controller
DWC3 GLUE
Required properties:
- - compatible: should be "ti,keystone-dwc3".
+ - compatible: should be
+ "ti,keystone-dwc3" for Keystone 2 SoCs
+ "ti,am654-dwc3" for AM654 SoC
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
with 'reg' property.
- reg : Address and length of the register set for the USB subsystem on
@@ -21,7 +23,7 @@ SoCs only:
- clock-names: Must be "usb".
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+The following are mandatory properties for 66AK2G and AM654:
- power-domains: Should contain a phandle to a PM domain provider node
and an args specifier containing the USB device id
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index 95afdcf3c33725d21272a37eee480c0c7e3e6d13..cb695aa3fba4ccdc13988514949a84d51b9abe7c 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Compatible list, contains
"qcom,dwc3"
"qcom,msm8996-dwc3" for msm8996 SOC.
+ "qcom,msm8998-dwc3" for msm8998 SOC.
"qcom,sdm845-dwc3" for sdm845 SOC.
- reg: Offset and length of register set for QSCRATCH wrapper
- power-domains: specifies a phandle to PM domain provider node
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index d366555166d0943a8765771399f96a9e9d2ad4fd..35039e7205150ea082ef5783b327397701947fb3 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -3,6 +3,7 @@ Renesas Electronics USB3.0 Peripheral driver
Required properties:
- compatible: Must contain one of the following:
- "renesas,r8a774a1-usb3-peri"
+ - "renesas,r8a774c0-usb3-peri"
- "renesas,r8a7795-usb3-peri"
- "renesas,r8a7796-usb3-peri"
- "renesas,r8a77965-usb3-peri"
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 90719f501852213a9e74b3b3ea7c1d40258a53e9..d93b6a1504f225e611ed14d8fa64bc5a445df78a 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -7,6 +7,7 @@ Required properties:
- "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device
- "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
- "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device
+ - "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device
- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
- "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
- "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 168ff819e8273fc5435552949c67467d69f14e1d..17915f64b8ee3c628e6c7e86385d31a942d11067 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -64,6 +64,8 @@ Optional properties :
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
+ - swap-dx-lanes : Specifies the ports which will swap the differential-pair
+ (D+/D-), default is not-swapped.
Examples:
usb2512b@2c {
@@ -81,4 +83,6 @@ Examples:
manufacturer = "Foo";
product = "Foo-Bar";
serial = "1234567890A";
+ /* correct misplaced usb connectors on port 1,2 */
+ swap-dx-lanes = <1 2>;
};
diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt
index f901ec77439c75ea3216b70067be8fe20d0b3df5..9dd1dc7b1009dd5532d96f0fa7160a7e677c7266 100644
--- a/Documentation/usb/authorization.txt
+++ b/Documentation/usb/authorization.txt
@@ -34,7 +34,9 @@ $ echo 1 > /sys/bus/usb/devices/usbX/authorized_default
By default, Wired USB devices are authorized by default to
connect. Wireless USB hosts deauthorize by default all new connected
devices (this is so because we need to do an authentication phase
-before authorizing).
+before authorizing). Writing "2" to the authorized_default attribute
+causes kernel to only authorize by default devices connected to internal
+USB ports.
Example system lockdown (lame)
diff --git a/MAINTAINERS b/MAINTAINERS
index 060f4ff8da58712575ae9d5ef1087ab54a707772..ae76b5853ffe30bda45d4e47a873f2eb5b82406c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9178,6 +9178,14 @@ F: drivers/gpu/drm/armada/
F: include/uapi/drm/armada_drm.h
F: Documentation/devicetree/bindings/display/armada/
+MARVELL ARMADA 3700 PHY DRIVERS
+M: Miquel Raynal <miquel.raynal@bootlin.com>
+S: Maintained
+F: drivers/phy/marvell/phy-mvebu-a3700-comphy.c
+F: drivers/phy/marvell/phy-mvebu-a3700-utmi.c
+F: Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+F: Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
+
MARVELL CRYPTO DRIVER
M: Boris Brezillon <bbrezillon@kernel.org>
M: Arnaud Ebalard <arno@natisbad.org>
diff --git a/drivers/base/devcon.c b/drivers/base/devcon.c
index d427e806cd73bf4f5cd6284a6e5126139087a2e3..04db9ae235e41ef2a9d254ce6a4c76977ef193b1 100644
--- a/drivers/base/devcon.c
+++ b/drivers/base/devcon.c
@@ -7,10 +7,37 @@
*/
#include <linux/device.h>
+#include <linux/property.h>
static DEFINE_MUTEX(devcon_lock);
static LIST_HEAD(devcon_list);
+typedef void *(*devcon_match_fn_t)(struct device_connection *con, int ep,
+ void *data);
+
+static void *
+fwnode_graph_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
+ void *data, devcon_match_fn_t match)
+{
+ struct device_connection con = { .id = con_id };
+ struct fwnode_handle *ep;
+ void *ret;
+
+ fwnode_graph_for_each_endpoint(fwnode, ep) {
+ con.fwnode = fwnode_graph_get_remote_port_parent(ep);
+ if (!fwnode_device_is_available(con.fwnode))
+ continue;
+
+ ret = match(&con, -1, data);
+ fwnode_handle_put(con.fwnode);
+ if (ret) {
+ fwnode_handle_put(ep);
+ return ret;
+ }
+ }
+ return NULL;
+}
+
/**
* device_connection_find_match - Find physical connection to a device
* @dev: Device with the connection
@@ -23,10 +50,9 @@ static LIST_HEAD(devcon_list);
* caller is expecting to be returned.
*/
void *device_connection_find_match(struct device *dev, const char *con_id,
- void *data,
- void *(*match)(struct device_connection *con,
- int ep, void *data))
+ void *data, devcon_match_fn_t match)
{
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
const char *devname = dev_name(dev);
struct device_connection *con;
void *ret = NULL;
@@ -35,6 +61,12 @@ void *device_connection_find_match(struct device *dev, const char *con_id,
if (!match)
return NULL;
+ if (fwnode) {
+ ret = fwnode_graph_devcon_match(fwnode, con_id, data, match);
+ if (ret)
+ return ret;
+ }
+
mutex_lock(&devcon_lock);
list_for_each_entry(con, &devcon_list, list) {
@@ -75,12 +107,36 @@ static struct bus_type *generic_match_buses[] = {
NULL,
};
+static int device_fwnode_match(struct device *dev, void *fwnode)
+{
+ return dev_fwnode(dev) == fwnode;
+}
+
+static void *device_connection_fwnode_match(struct device_connection *con)
+{
+ struct bus_type *bus;
+ struct device *dev;
+
+ for (bus = generic_match_buses[0]; bus; bus++) {
+ dev = bus_find_device(bus, NULL, (void *)con->fwnode,
+ device_fwnode_match);
+ if (dev && !strncmp(dev_name(dev), con->id, strlen(con->id)))
+ return dev;
+
+ put_device(dev);
+ }
+ return NULL;
+}
+
/* This tries to find the device from the most common bus types by name. */
static void *generic_match(struct device_connection *con, int ep, void *data)
{
struct bus_type *bus;
struct device *dev;
+ if (con->fwnode)
+ return device_connection_fwnode_match(con);
+
for (bus = generic_match_buses[0]; bus; bus++) {
dev = bus_find_device_by_name(bus, NULL, con->endpoint[ep]);
if (dev)
diff --git a/drivers/phy/broadcom/phy-bcm-sr-pcie.c b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
index c10e95f86de50ee0e56d54bc0ab2101b850ce323..96a3af126a78d780cc4e212f53bd186200f41f63 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
@@ -78,8 +78,8 @@ struct sr_pcie_phy_core {
static const u8 pipemux_table[] = {
/* PIPEMUX = 0, EP 1x16 */
0x00,
- /* PIPEMUX = 1, EP 2x8 */
- 0x00,
+ /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */
+ 0x80,
/* PIPEMUX = 2, EP 4x4 */
0x00,
/* PIPEMUX = 3, RC 2x8, cores 0, 7 */
diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig
index 2b8c0851ff33945992de937b1d2091ac73664640..31f18b67dd7c2a8f4c4fdc1c95633ce3809f08f8 100644
--- a/drivers/phy/cadence/Kconfig
+++ b/drivers/phy/cadence/Kconfig
@@ -1,6 +1,7 @@
#
# Phy drivers for Cadence PHYs
#
+
config PHY_CADENCE_DP
tristate "Cadence MHDP DisplayPort PHY driver"
depends on OF
@@ -9,9 +10,19 @@ config PHY_CADENCE_DP
help
Support for Cadence MHDP DisplayPort PHY.
+config PHY_CADENCE_DPHY
+ tristate "Cadence D-PHY Support"
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ select GENERIC_PHY_MIPI_DPHY
+ help
+ Choose this option if you have a Cadence D-PHY in your
+ system. If M is selected, the module will be called
+ cdns-dphy.
+
config PHY_CADENCE_SIERRA
tristate "Cadence Sierra PHY Driver"
depends on OF && HAS_IOMEM && RESET_CONTROLLER
select GENERIC_PHY
help
- Enable this to support the Cadence Sierra PHY driver
\ No newline at end of file
+ Enable this to support the Cadence Sierra PHY driver
diff --git a/drivers/phy/cadence/Makefile b/drivers/phy/cadence/Makefile
index 412349af0492b62a684b216fe90b24be95769cff..2f9e3457b954889ece6c3d182589ab4775f13793 100644
--- a/drivers/phy/cadence/Makefile
+++ b/drivers/phy/cadence/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_PHY_CADENCE_DP) += phy-cadence-dp.o
+obj-$(CONFIG_PHY_CADENCE_DPHY) += cdns-dphy.o
obj-$(CONFIG_PHY_CADENCE_SIERRA) += phy-cadence-sierra.o
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
new file mode 100644
index 0000000000000000000000000000000000000000..90c4e9b5aac8307fa6d2d77c5f52c05cf4a48cde
--- /dev/null
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright: 2017-2018 Cadence Design Systems, Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
+#define REG_WAKEUP_TIME_NS 800
+#define DPHY_PLL_RATE_HZ 108000000
+
+/* DPHY registers */
+#define DPHY_PMA_CMN(reg) (reg)
+#define DPHY_PMA_LCLK(reg) (0x100 + (reg))
+#define DPHY_PMA_LDATA(lane, reg) (0x200 + ((lane) * 0x100) + (reg))
+#define DPHY_PMA_RCLK(reg) (0x600 + (reg))
+#define DPHY_PMA_RDATA(lane, reg) (0x700 + ((lane) * 0x100) + (reg))
+#define DPHY_PCS(reg) (0xb00 + (reg))
+
+#define DPHY_CMN_SSM DPHY_PMA_CMN(0x20)
+#define DPHY_CMN_SSM_EN BIT(0)
+#define DPHY_CMN_TX_MODE_EN BIT(9)
+
+#define DPHY_CMN_PWM DPHY_PMA_CMN(0x40)
+#define DPHY_CMN_PWM_DIV(x) ((x) << 20)
+#define DPHY_CMN_PWM_LOW(x) ((x) << 10)
+#define DPHY_CMN_PWM_HIGH(x) (x)
+
+#define DPHY_CMN_FBDIV DPHY_PMA_CMN(0x4c)
+#define DPHY_CMN_FBDIV_VAL(low, high) (((high) << 11) | ((low) << 22))
+#define DPHY_CMN_FBDIV_FROM_REG (BIT(10) | BIT(21))
+
+#define DPHY_CMN_OPIPDIV DPHY_PMA_CMN(0x50)
+#define DPHY_CMN_IPDIV_FROM_REG BIT(0)
+#define DPHY_CMN_IPDIV(x) ((x) << 1)
+#define DPHY_CMN_OPDIV_FROM_REG BIT(6)
+#define DPHY_CMN_OPDIV(x) ((x) << 7)
+
+#define DPHY_PSM_CFG DPHY_PCS(0x4)
+#define DPHY_PSM_CFG_FROM_REG BIT(0)
+#define DPHY_PSM_CLK_DIV(x) ((x) << 1)
+
+#define DSI_HBP_FRAME_OVERHEAD 12
+#define DSI_HSA_FRAME_OVERHEAD 14
+#define DSI_HFP_FRAME_OVERHEAD 6
+#define DSI_HSS_VSS_VSE_FRAME_OVERHEAD 4
+#define DSI_BLANKING_FRAME_OVERHEAD 6
+#define DSI_NULL_FRAME_OVERHEAD 6
+#define DSI_EOT_PKT_SIZE 4
+
+struct cdns_dphy_cfg {
+ u8 pll_ipdiv;
+ u8 pll_opdiv;
+ u16 pll_fbdiv;
+ unsigned int nlanes;
+};
+
+enum cdns_dphy_clk_lane_cfg {
+ DPHY_CLK_CFG_LEFT_DRIVES_ALL = 0,
+ DPHY_CLK_CFG_LEFT_DRIVES_RIGHT = 1,
+ DPHY_CLK_CFG_LEFT_DRIVES_LEFT = 2,
+ DPHY_CLK_CFG_RIGHT_DRIVES_ALL = 3,
+};
+
+struct cdns_dphy;
+struct cdns_dphy_ops {
+ int (*probe)(struct cdns_dphy *dphy);
+ void (*remove)(struct cdns_dphy *dphy);
+ void (*set_psm_div)(struct cdns_dphy *dphy, u8 div);
+ void (*set_clk_lane_cfg)(struct cdns_dphy *dphy,
+ enum cdns_dphy_clk_lane_cfg cfg);
+ void (*set_pll_cfg)(struct cdns_dphy *dphy,
+ const struct cdns_dphy_cfg *cfg);
+ unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy);
+};
+
+struct cdns_dphy {
+ struct cdns_dphy_cfg cfg;
+ void __iomem *regs;
+ struct clk *psm_clk;
+ struct clk *pll_ref_clk;
+ const struct cdns_dphy_ops *ops;
+ struct phy *phy;
+};
+
+static int cdns_dsi_get_dphy_pll_cfg(struct cdns_dphy *dphy,
+ struct cdns_dphy_cfg *cfg,
+ struct phy_configure_opts_mipi_dphy *opts,
+ unsigned int *dsi_hfp_ext)
+{
+ unsigned long pll_ref_hz = clk_get_rate(dphy->pll_ref_clk);
+ u64 dlane_bps;
+
+ memset(cfg, 0, sizeof(*cfg));
+
+ if (pll_ref_hz < 9600000 || pll_ref_hz >= 150000000)
+ return -EINVAL;
+ else if (pll_ref_hz < 19200000)
+ cfg->pll_ipdiv = 1;
+ else if (pll_ref_hz < 38400000)
+ cfg->pll_ipdiv = 2;
+ else if (pll_ref_hz < 76800000)
+ cfg->pll_ipdiv = 4;
+ else
+ cfg->pll_ipdiv = 8;
+
+ dlane_bps = opts->hs_clk_rate;
+
+ if (dlane_bps > 2500000000UL || dlane_bps < 160000000UL)
+ return -EINVAL;
+ else if (dlane_bps >= 1250000000)
+ cfg->pll_opdiv = 1;
+ else if (dlane_bps >= 630000000)
+ cfg->pll_opdiv = 2;
+ else if (dlane_bps >= 320000000)
+ cfg->pll_opdiv = 4;
+ else if (dlane_bps >= 160000000)
+ cfg->pll_opdiv = 8;
+
+ cfg->pll_fbdiv = DIV_ROUND_UP_ULL(dlane_bps * 2 * cfg->pll_opdiv *
+ cfg->pll_ipdiv,
+ pll_ref_hz);
+
+ return 0;
+}
+
+static int cdns_dphy_setup_psm(struct cdns_dphy *dphy)
+{
+ unsigned long psm_clk_hz = clk_get_rate(dphy->psm_clk);
+ unsigned long psm_div;
+
+ if (!psm_clk_hz || psm_clk_hz > 100000000)
+ return -EINVAL;
+
+ psm_div = DIV_ROUND_CLOSEST(psm_clk_hz, 1000000);
+ if (dphy->ops->set_psm_div)
+ dphy->ops->set_psm_div(dphy, psm_div);
+
+ return 0;
+}
+
+static void cdns_dphy_set_clk_lane_cfg(struct cdns_dphy *dphy,
+ enum cdns_dphy_clk_lane_cfg cfg)
+{
+ if (dphy->ops->set_clk_lane_cfg)
+ dphy->ops->set_clk_lane_cfg(dphy, cfg);
+}
+
+static void cdns_dphy_set_pll_cfg(struct cdns_dphy *dphy,
+ const struct cdns_dphy_cfg *cfg)
+{
+ if (dphy->ops->set_pll_cfg)
+ dphy->ops->set_pll_cfg(dphy, cfg);
+}
+
+static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy)
+{
+ return dphy->ops->get_wakeup_time_ns(dphy);
+}
+
+static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy)
+{
+ /* Default wakeup time is 800 ns (in a simulated environment). */
+ return 800;
+}
+
+static void cdns_dphy_ref_set_pll_cfg(struct cdns_dphy *dphy,
+ const struct cdns_dphy_cfg *cfg)
+{
+ u32 fbdiv_low, fbdiv_high;
+
+ fbdiv_low = (cfg->pll_fbdiv / 4) - 2;
+ fbdiv_high = cfg->pll_fbdiv - fbdiv_low - 2;
+
+ writel(DPHY_CMN_IPDIV_FROM_REG | DPHY_CMN_OPDIV_FROM_REG |
+ DPHY_CMN_IPDIV(cfg->pll_ipdiv) |
+ DPHY_CMN_OPDIV(cfg->pll_opdiv),
+ dphy->regs + DPHY_CMN_OPIPDIV);
+ writel(DPHY_CMN_FBDIV_FROM_REG |
+ DPHY_CMN_FBDIV_VAL(fbdiv_low, fbdiv_high),
+ dphy->regs + DPHY_CMN_FBDIV);
+ writel(DPHY_CMN_PWM_HIGH(6) | DPHY_CMN_PWM_LOW(0x101) |
+ DPHY_CMN_PWM_DIV(0x8),
+ dphy->regs + DPHY_CMN_PWM);
+}
+
+static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div)
+{
+ writel(DPHY_PSM_CFG_FROM_REG | DPHY_PSM_CLK_DIV(div),
+ dphy->regs + DPHY_PSM_CFG);
+}
+
+/*
+ * This is the reference implementation of DPHY hooks. Specific integration of
+ * this IP may have to re-implement some of them depending on how they decided
+ * to wire things in the SoC.
+ */
+static const struct cdns_dphy_ops ref_dphy_ops = {
+ .get_wakeup_time_ns = cdns_dphy_ref_get_wakeup_time_ns,
+ .set_pll_cfg = cdns_dphy_ref_set_pll_cfg,
+ .set_psm_div = cdns_dphy_ref_set_psm_div,
+};
+
+static int cdns_dphy_config_from_opts(struct phy *phy,
+ struct phy_configure_opts_mipi_dphy *opts,
+ struct cdns_dphy_cfg *cfg)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ unsigned int dsi_hfp_ext = 0;
+ int ret;
+
+ ret = phy_mipi_dphy_config_validate(opts);
+ if (ret)
+ return ret;
+
+ ret = cdns_dsi_get_dphy_pll_cfg(dphy, cfg,
+ opts, &dsi_hfp_ext);
+ if (ret)
+ return ret;
+
+ opts->wakeup = cdns_dphy_get_wakeup_time_ns(dphy) / 1000;
+
+ return 0;
+}
+
+static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
+ union phy_configure_opts *opts)
+{
+ struct cdns_dphy_cfg cfg = { 0 };
+
+ if (mode != PHY_MODE_MIPI_DPHY)
+ return -EINVAL;
+
+ return cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+}
+
+static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ struct cdns_dphy_cfg cfg = { 0 };
+ int ret;
+
+ ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure the internal PSM clk divider so that the DPHY has a
+ * 1MHz clk (or something close).
+ */
+ ret = cdns_dphy_setup_psm(dphy);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes
+ * and 8 data lanes, each clk lane can be attache different set of
+ * data lanes. The 2 groups are named 'left' and 'right', so here we
+ * just say that we want the 'left' clk lane to drive the 'left' data
+ * lanes.
+ */
+ cdns_dphy_set_clk_lane_cfg(dphy, DPHY_CLK_CFG_LEFT_DRIVES_LEFT);
+
+ /*
+ * Configure the DPHY PLL that will be used to generate the TX byte
+ * clk.
+ */
+ cdns_dphy_set_pll_cfg(dphy, &cfg);
+
+ return 0;
+}
+
+static int cdns_dphy_power_on(struct phy *phy)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+
+ clk_prepare_enable(dphy->psm_clk);
+ clk_prepare_enable(dphy->pll_ref_clk);
+
+ /* Start TX state machine. */
+ writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
+ dphy->regs + DPHY_CMN_SSM);
+
+ return 0;
+}
+
+static int cdns_dphy_power_off(struct phy *phy)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(dphy->pll_ref_clk);
+ clk_disable_unprepare(dphy->psm_clk);
+
+ return 0;
+}
+
+static const struct phy_ops cdns_dphy_ops = {
+ .configure = cdns_dphy_configure,
+ .validate = cdns_dphy_validate,
+ .power_on = cdns_dphy_power_on,
+ .power_off = cdns_dphy_power_off,
+};
+
+static int cdns_dphy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct cdns_dphy *dphy;
+ struct resource *res;
+ int ret;
+
+ dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL);
+ if (!dphy)
+ return -ENOMEM;
+ dev_set_drvdata(&pdev->dev, dphy);
+
+ dphy->ops = of_device_get_match_data(&pdev->dev);
+ if (!dphy->ops)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dphy->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dphy->regs))
+ return PTR_ERR(dphy->regs);
+
+ dphy->psm_clk = devm_clk_get(&pdev->dev, "psm");
+ if (IS_ERR(dphy->psm_clk))
+ return PTR_ERR(dphy->psm_clk);
+
+ dphy->pll_ref_clk = devm_clk_get(&pdev->dev, "pll_ref");
+ if (IS_ERR(dphy->pll_ref_clk))
+ return PTR_ERR(dphy->pll_ref_clk);
+
+ if (dphy->ops->probe) {
+ ret = dphy->ops->probe(dphy);
+ if (ret)
+ return ret;
+ }
+
+ dphy->phy = devm_phy_create(&pdev->dev, NULL, &cdns_dphy_ops);
+ if (IS_ERR(dphy->phy)) {
+ dev_err(&pdev->dev, "failed to create PHY\n");
+ if (dphy->ops->remove)
+ dphy->ops->remove(dphy);
+ return PTR_ERR(dphy->phy);
+ }
+
+ phy_set_drvdata(dphy->phy, dphy);
+ phy_provider = devm_of_phy_provider_register(&pdev->dev,
+ of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int cdns_dphy_remove(struct platform_device *pdev)
+{
+ struct cdns_dphy *dphy = dev_get_drvdata(&pdev->dev);
+
+ if (dphy->ops->remove)
+ dphy->ops->remove(dphy);
+
+ return 0;
+}
+
+static const struct of_device_id cdns_dphy_of_match[] = {
+ { .compatible = "cdns,dphy", .data = &ref_dphy_ops },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, cdns_dphy_of_match);
+
+static struct platform_driver cdns_dphy_platform_driver = {
+ .probe = cdns_dphy_probe,
+ .remove = cdns_dphy_remove,
+ .driver = {
+ .name = "cdns-mipi-dphy",
+ .of_match_table = cdns_dphy_of_match,
+ },
+};
+module_platform_driver(cdns_dphy_platform_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@bootlin.com>");
+MODULE_DESCRIPTION("Cadence MIPI D-PHY Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index f050bd4e97e0f09981fce525258c713827bea67a..832670b4952b00ac51021ca37b9fb57d5ed74f75 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -2,4 +2,4 @@ config PHY_FSL_IMX8MQ_USB
tristate "Freescale i.MX8M USB3 PHY"
depends on OF && HAS_IOMEM
select GENERIC_PHY
- default SOC_IMX8MQ
+ default ARCH_MXC && ARM64
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 224ea4e6a46d37105c32c53ba7a6e48a9d5e9f8d..9ba872325dad44a47092753f2962a244b20b66fd 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -21,6 +21,27 @@ config PHY_BERLIN_USB
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
+config PHY_MVEBU_A3700_COMPHY
+ tristate "Marvell A3700 comphy driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF
+ depends on HAVE_ARM_SMCCC
+ default y
+ select GENERIC_PHY
+ help
+ This driver allows to control the comphy, a hardware block providing
+ shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be
+ used by various controllers: Ethernet, SATA, USB3, PCIe.
+
+config PHY_MVEBU_A3700_UTMI
+ tristate "Marvell A3700 UTMI driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF
+ default y
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell A3700 UTMI PHY driver.
+
config PHY_MVEBU_A38X_COMPHY
tristate "Marvell Armada 38x comphy driver"
depends on ARCH_MVEBU || COMPILE_TEST
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
index 59b6c03ef756af6a5e4ad678623ef09daa10146e..434eb9ca6cc3f6509afa74391e89d1fddb15da9f 100644
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -2,6 +2,8 @@
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
+obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o
obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o
obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
diff --git a/drivers/phy/marvell/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
index 1a3db288c0a9ac81ade8eadab50429931c1898af..fa5dc9462d09444c7d87a7468668ea2f7acd8b1f 100644
--- a/drivers/phy/marvell/phy-armada375-usb2.c
+++ b/drivers/phy/marvell/phy-armada375-usb2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* USB cluster support for Armada 375 platform.
*
@@ -5,10 +6,6 @@
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2 or later. This program is licensed "as is"
- * without any warranty of any kind, whether express or implied.
- *
* Armada 375 comes with an USB2 host and device controller and an
* USB3 controller. The USB cluster control register allows to manage
* common features of both USB controllers.
@@ -18,7 +15,6 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
@@ -142,7 +138,6 @@ static const struct of_device_id of_usb_cluster_table[] = {
{ .compatible = "marvell,armada-375-usb-cluster", },
{ /* end of list */ },
};
-MODULE_DEVICE_TABLE(of, of_usb_cluster_table);
static struct platform_driver armada375_usb_phy_driver = {
.probe = armada375_usb_phy_probe,
@@ -151,8 +146,4 @@ static struct platform_driver armada375_usb_phy_driver = {
.name = "armada-375-usb-cluster",
}
};
-module_platform_driver(armada375_usb_phy_driver);
-
-MODULE_DESCRIPTION("Armada 375 USB cluster driver");
-MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(armada375_usb_phy_driver);
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
new file mode 100644
index 0000000000000000000000000000000000000000..8812a104c23313837da54dc6ab53057027f85bb4
--- /dev/null
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell
+ *
+ * Authors:
+ * Evan Wang <xswang@marvell.com>
+ * Miquèl Raynal <miquel.raynal@bootlin.com>
+ *
+ * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart.
+ * SMC call initial support done by Grzegorz Jaszczyk.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define MVEBU_A3700_COMPHY_LANES 3
+#define MVEBU_A3700_COMPHY_PORTS 2
+
+/* COMPHY Fast SMC function identifiers */
+#define COMPHY_SIP_POWER_ON 0x82000001
+#define COMPHY_SIP_POWER_OFF 0x82000002
+#define COMPHY_SIP_PLL_LOCK 0x82000003
+
+#define COMPHY_FW_MODE_SATA 0x1
+#define COMPHY_FW_MODE_SGMII 0x2
+#define COMPHY_FW_MODE_HS_SGMII 0x3
+#define COMPHY_FW_MODE_USB3H 0x4
+#define COMPHY_FW_MODE_USB3D 0x5
+#define COMPHY_FW_MODE_PCIE 0x6
+#define COMPHY_FW_MODE_RXAUI 0x7
+#define COMPHY_FW_MODE_XFI 0x8
+#define COMPHY_FW_MODE_SFI 0x9
+#define COMPHY_FW_MODE_USB3 0xa
+
+#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */
+#define COMPHY_FW_SPEED_2_5G 1
+#define COMPHY_FW_SPEED_3_125G 2 /* SGMII 2.5G */
+#define COMPHY_FW_SPEED_5G 3
+#define COMPHY_FW_SPEED_5_15625G 4 /* XFI 5G */
+#define COMPHY_FW_SPEED_6G 5
+#define COMPHY_FW_SPEED_10_3125G 6 /* XFI 10G */
+#define COMPHY_FW_SPEED_MAX 0x3F
+
+#define COMPHY_FW_MODE(mode) ((mode) << 12)
+#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \
+ ((idx) << 8) | \
+ ((speed) << 2))
+#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode, idx, speed) | \
+ ((width) << 18))
+
+struct mvebu_a3700_comphy_conf {
+ unsigned int lane;
+ enum phy_mode mode;
+ int submode;
+ unsigned int port;
+ u32 fw_mode;
+};
+
+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw) \
+ { \
+ .lane = _lane, \
+ .mode = _mode, \
+ .submode = _smode, \
+ .port = _port, \
+ .fw_mode = _fw, \
+ }
+
+#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \
+ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw)
+
+#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \
+ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw)
+
+static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = {
+ /* lane 0 */
+ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0,
+ COMPHY_FW_MODE_USB3H),
+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1,
+ COMPHY_FW_MODE_SGMII),
+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1,
+ COMPHY_FW_MODE_HS_SGMII),
+ /* lane 1 */
+ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0,
+ COMPHY_FW_MODE_PCIE),
+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0,
+ COMPHY_FW_MODE_SGMII),
+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0,
+ COMPHY_FW_MODE_HS_SGMII),
+ /* lane 2 */
+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0,
+ COMPHY_FW_MODE_SATA),
+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0,
+ COMPHY_FW_MODE_USB3H),
+};
+
+struct mvebu_a3700_comphy_lane {
+ struct device *dev;
+ unsigned int id;
+ enum phy_mode mode;
+ int submode;
+ int port;
+};
+
+static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
+ unsigned long mode)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
+ enum phy_mode mode,
+ int submode)
+{
+ int i, n = ARRAY_SIZE(mvebu_a3700_comphy_modes);
+
+ /* Unused PHY mux value is 0x0 */
+ if (mode == PHY_MODE_INVALID)
+ return -EINVAL;
+
+ for (i = 0; i < n; i++) {
+ if (mvebu_a3700_comphy_modes[i].lane == lane &&
+ mvebu_a3700_comphy_modes[i].port == port &&
+ mvebu_a3700_comphy_modes[i].mode == mode &&
+ mvebu_a3700_comphy_modes[i].submode == submode)
+ break;
+ }
+
+ if (i == n)
+ return -EINVAL;
+
+ return mvebu_a3700_comphy_modes[i].fw_mode;
+}
+
+static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode,
+ int submode)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+ int fw_mode;
+
+ if (submode == PHY_INTERFACE_MODE_1000BASEX)
+ submode = PHY_INTERFACE_MODE_SGMII;
+
+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode,
+ submode);
+ if (fw_mode < 0) {
+ dev_err(lane->dev, "invalid COMPHY mode\n");
+ return fw_mode;
+ }
+
+ /* Just remember the mode, ->power_on() will do the real setup */
+ lane->mode = mode;
+ lane->submode = submode;
+
+ return 0;
+}
+
+static int mvebu_a3700_comphy_power_on(struct phy *phy)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+ u32 fw_param;
+ int fw_mode;
+
+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port,
+ lane->mode, lane->submode);
+ if (fw_mode < 0) {
+ dev_err(lane->dev, "invalid COMPHY mode\n");
+ return fw_mode;
+ }
+
+ switch (lane->mode) {
+ case PHY_MODE_USB_HOST_SS:
+ dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id);
+ fw_param = COMPHY_FW_MODE(fw_mode);
+ break;
+ case PHY_MODE_SATA:
+ dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id);
+ fw_param = COMPHY_FW_MODE(fw_mode);
+ break;
+ case PHY_MODE_ETHERNET:
+ switch (lane->submode) {
+ case PHY_INTERFACE_MODE_SGMII:
+ dev_dbg(lane->dev, "set lane %d to SGMII mode\n",
+ lane->id);
+ fw_param = COMPHY_FW_NET(fw_mode, lane->port,
+ COMPHY_FW_SPEED_1_25G);
+ break;
+ case PHY_INTERFACE_MODE_2500BASEX:
+ dev_dbg(lane->dev, "set lane %d to HS SGMII mode\n",
+ lane->id);
+ fw_param = COMPHY_FW_NET(fw_mode, lane->port,
+ COMPHY_FW_SPEED_3_125G);
+ break;
+ default:
+ dev_err(lane->dev, "unsupported PHY submode (%d)\n",
+ lane->submode);
+ return -ENOTSUPP;
+ }
+ break;
+ case PHY_MODE_PCIE:
+ dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id);
+ fw_param = COMPHY_FW_PCIE(fw_mode, lane->port,
+ COMPHY_FW_SPEED_5G,
+ phy->attrs.bus_width);
+ break;
+ default:
+ dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode);
+ return -ENOTSUPP;
+ }
+
+ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
+}
+
+static int mvebu_a3700_comphy_power_off(struct phy *phy)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+
+ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0);
+}
+
+static const struct phy_ops mvebu_a3700_comphy_ops = {
+ .power_on = mvebu_a3700_comphy_power_on,
+ .power_off = mvebu_a3700_comphy_power_off,
+ .set_mode = mvebu_a3700_comphy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *mvebu_a3700_comphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct mvebu_a3700_comphy_lane *lane;
+ struct phy *phy;
+
+ if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS))
+ return ERR_PTR(-EINVAL);
+
+ phy = of_phy_simple_xlate(dev, args);
+ if (IS_ERR(phy))
+ return phy;
+
+ lane = phy_get_drvdata(phy);
+ lane->port = args->args[0];
+
+ return phy;
+}
+
+static int mvebu_a3700_comphy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *provider;
+ struct device_node *child;
+
+ for_each_available_child_of_node(pdev->dev.of_node, child) {
+ struct mvebu_a3700_comphy_lane *lane;
+ struct phy *phy;
+ int ret;
+ u32 lane_id;
+
+ ret = of_property_read_u32(child, "reg", &lane_id);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
+ ret);
+ continue;
+ }
+
+ if (lane_id >= MVEBU_A3700_COMPHY_LANES) {
+ dev_err(&pdev->dev, "invalid 'reg' property\n");
+ continue;
+ }
+
+ lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL);
+ if (!lane)
+ return -ENOMEM;
+
+ phy = devm_phy_create(&pdev->dev, child,
+ &mvebu_a3700_comphy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ lane->dev = &pdev->dev;
+ lane->mode = PHY_MODE_INVALID;
+ lane->submode = PHY_INTERFACE_MODE_NA;
+ lane->id = lane_id;
+ lane->port = -1;
+ phy_set_drvdata(phy, lane);
+ }
+
+ provider = devm_of_phy_provider_register(&pdev->dev,
+ mvebu_a3700_comphy_xlate);
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mvebu_a3700_comphy_of_match_table[] = {
+ { .compatible = "marvell,comphy-a3700" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mvebu_a3700_comphy_of_match_table);
+
+static struct platform_driver mvebu_a3700_comphy_driver = {
+ .probe = mvebu_a3700_comphy_probe,
+ .driver = {
+ .name = "mvebu-a3700-comphy",
+ .of_match_table = mvebu_a3700_comphy_of_match_table,
+ },
+};
+module_platform_driver(mvebu_a3700_comphy_driver);
+
+MODULE_AUTHOR("Miquèl Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Common PHY driver for A3700");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
new file mode 100644
index 0000000000000000000000000000000000000000..94a29dea57af37f9d9d873bb796d62e5fda699e2
--- /dev/null
+++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell
+ *
+ * Authors:
+ * Igal Liberman <igall@marvell.com>
+ * Miquèl Raynal <miquel.raynal@bootlin.com>
+ *
+ * Marvell A3700 UTMI PHY driver
+ */
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* Armada 3700 UTMI PHY registers */
+#define USB2_PHY_PLL_CTRL_REG0 0x0
+#define PLL_REF_DIV_OFF 0
+#define PLL_REF_DIV_MASK GENMASK(6, 0)
+#define PLL_REF_DIV_5 5
+#define PLL_FB_DIV_OFF 16
+#define PLL_FB_DIV_MASK GENMASK(24, 16)
+#define PLL_FB_DIV_96 96
+#define PLL_SEL_LPFR_OFF 28
+#define PLL_SEL_LPFR_MASK GENMASK(29, 28)
+#define PLL_READY BIT(31)
+#define USB2_PHY_CAL_CTRL 0x8
+#define PHY_PLLCAL_DONE BIT(31)
+#define PHY_IMPCAL_DONE BIT(23)
+#define USB2_RX_CHAN_CTRL1 0x18
+#define USB2PHY_SQCAL_DONE BIT(31)
+#define USB2_PHY_OTG_CTRL 0x34
+#define PHY_PU_OTG BIT(4)
+#define USB2_PHY_CHRGR_DETECT 0x38
+#define PHY_CDP_EN BIT(2)
+#define PHY_DCP_EN BIT(3)
+#define PHY_PD_EN BIT(4)
+#define PHY_PU_CHRG_DTC BIT(5)
+#define PHY_CDP_DM_AUTO BIT(7)
+#define PHY_ENSWITCH_DP BIT(12)
+#define PHY_ENSWITCH_DM BIT(13)
+
+/* Armada 3700 USB miscellaneous registers */
+#define USB2_PHY_CTRL(usb32) (usb32 ? 0x20 : 0x4)
+#define RB_USB2PHY_PU BIT(0)
+#define USB2_DP_PULLDN_DEV_MODE BIT(5)
+#define USB2_DM_PULLDN_DEV_MODE BIT(6)
+#define RB_USB2PHY_SUSPM(usb32) (usb32 ? BIT(14) : BIT(7))
+
+#define PLL_LOCK_DELAY_US 10000
+#define PLL_LOCK_TIMEOUT_US 1000000
+
+/**
+ * struct mvebu_a3700_utmi_caps - PHY capabilities
+ *
+ * @usb32: Flag indicating which PHY is in use (impacts the register map):
+ * - The UTMI PHY wired to the USB3/USB2 controller (otg)
+ * - The UTMI PHY wired to the USB2 controller (host only)
+ * @ops: PHY operations
+ */
+struct mvebu_a3700_utmi_caps {
+ int usb32;
+ const struct phy_ops *ops;
+};
+
+/**
+ * struct mvebu_a3700_utmi - PHY driver data
+ *
+ * @regs: PHY registers
+ * @usb_mis: Regmap with USB miscellaneous registers including PHY ones
+ * @caps: PHY capabilities
+ * @phy: PHY handle
+ */
+struct mvebu_a3700_utmi {
+ void __iomem *regs;
+ struct regmap *usb_misc;
+ const struct mvebu_a3700_utmi_caps *caps;
+ struct phy *phy;
+};
+
+static int mvebu_a3700_utmi_phy_power_on(struct phy *phy)
+{
+ struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy);
+ struct device *dev = &phy->dev;
+ int usb32 = utmi->caps->usb32;
+ int ret = 0;
+ u32 reg;
+
+ /*
+ * Setup PLL. 40MHz clock used to be the default, being 25MHz now.
+ * See "PLL Settings for Typical REFCLK" table.
+ */
+ reg = readl(utmi->regs + USB2_PHY_PLL_CTRL_REG0);
+ reg &= ~(PLL_REF_DIV_MASK | PLL_FB_DIV_MASK | PLL_SEL_LPFR_MASK);
+ reg |= (PLL_REF_DIV_5 << PLL_REF_DIV_OFF) |
+ (PLL_FB_DIV_96 << PLL_FB_DIV_OFF);
+ writel(reg, utmi->regs + USB2_PHY_PLL_CTRL_REG0);
+
+ /* Enable PHY pull up and disable USB2 suspend */
+ regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32),
+ RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU,
+ RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU);
+
+ if (usb32) {
+ /* Power up OTG module */
+ reg = readl(utmi->regs + USB2_PHY_OTG_CTRL);
+ reg |= PHY_PU_OTG;
+ writel(reg, utmi->regs + USB2_PHY_OTG_CTRL);
+
+ /* Disable PHY charger detection */
+ reg = readl(utmi->regs + USB2_PHY_CHRGR_DETECT);
+ reg &= ~(PHY_CDP_EN | PHY_DCP_EN | PHY_PD_EN | PHY_PU_CHRG_DTC |
+ PHY_CDP_DM_AUTO | PHY_ENSWITCH_DP | PHY_ENSWITCH_DM);
+ writel(reg, utmi->regs + USB2_PHY_CHRGR_DETECT);
+
+ /* Disable PHY DP/DM pull-down (used for device mode) */
+ regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32),
+ USB2_DP_PULLDN_DEV_MODE |
+ USB2_DM_PULLDN_DEV_MODE, 0);
+ }
+
+ /* Wait for PLL calibration */
+ ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg,
+ reg & PHY_PLLCAL_DONE,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "Failed to end USB2 PLL calibration\n");
+ return ret;
+ }
+
+ /* Wait for impedance calibration */
+ ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg,
+ reg & PHY_IMPCAL_DONE,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "Failed to end USB2 impedance calibration\n");
+ return ret;
+ }
+
+ /* Wait for squelch calibration */
+ ret = readl_poll_timeout(utmi->regs + USB2_RX_CHAN_CTRL1, reg,
+ reg & USB2PHY_SQCAL_DONE,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "Failed to end USB2 unknown calibration\n");
+ return ret;
+ }
+
+ /* Wait for PLL to be locked */
+ ret = readl_poll_timeout(utmi->regs + USB2_PHY_PLL_CTRL_REG0, reg,
+ reg & PLL_READY,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret)
+ dev_err(dev, "Failed to lock USB2 PLL\n");
+
+ return ret;
+}
+
+static int mvebu_a3700_utmi_phy_power_off(struct phy *phy)
+{
+ struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy);
+ int usb32 = utmi->caps->usb32;
+ u32 reg;
+
+ /* Disable PHY pull-up and enable USB2 suspend */
+ reg = readl(utmi->regs + USB2_PHY_CTRL(usb32));
+ reg &= ~(RB_USB2PHY_PU | RB_USB2PHY_SUSPM(usb32));
+ writel(reg, utmi->regs + USB2_PHY_CTRL(usb32));
+
+ /* Power down OTG module */
+ if (usb32) {
+ reg = readl(utmi->regs + USB2_PHY_OTG_CTRL);
+ reg &= ~PHY_PU_OTG;
+ writel(reg, utmi->regs + USB2_PHY_OTG_CTRL);
+ }
+
+ return 0;
+}
+
+static const struct phy_ops mvebu_a3700_utmi_phy_ops = {
+ .power_on = mvebu_a3700_utmi_phy_power_on,
+ .power_off = mvebu_a3700_utmi_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_otg_phy_caps = {
+ .usb32 = true,
+ .ops = &mvebu_a3700_utmi_phy_ops,
+};
+
+static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_host_phy_caps = {
+ .usb32 = false,
+ .ops = &mvebu_a3700_utmi_phy_ops,
+};
+
+static const struct of_device_id mvebu_a3700_utmi_of_match[] = {
+ {
+ .compatible = "marvell,a3700-utmi-otg-phy",
+ .data = &mvebu_a3700_utmi_otg_phy_caps,
+ },
+ {
+ .compatible = "marvell,a3700-utmi-host-phy",
+ .data = &mvebu_a3700_utmi_host_phy_caps,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mvebu_a3700_utmi_of_match);
+
+static int mvebu_a3700_utmi_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mvebu_a3700_utmi *utmi;
+ struct phy_provider *provider;
+ struct resource *res;
+
+ utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
+ if (!utmi)
+ return -ENOMEM;
+
+ /* Get UTMI memory region */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Missing UTMI PHY memory resource\n");
+ return -ENODEV;
+ }
+
+ utmi->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(utmi->regs))
+ return PTR_ERR(utmi->regs);
+
+ /* Get miscellaneous Host/PHY region */
+ utmi->usb_misc = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "marvell,usb-misc-reg");
+ if (IS_ERR(utmi->usb_misc)) {
+ dev_err(dev,
+ "Missing USB misc purpose system controller\n");
+ return PTR_ERR(utmi->usb_misc);
+ }
+
+ /* Retrieve PHY capabilities */
+ utmi->caps = of_device_get_match_data(dev);
+
+ /* Instantiate the PHY */
+ utmi->phy = devm_phy_create(dev, NULL, utmi->caps->ops);
+ if (IS_ERR(utmi->phy)) {
+ dev_err(dev, "Failed to create the UTMI PHY\n");
+ return PTR_ERR(utmi->phy);
+ }
+
+ phy_set_drvdata(utmi->phy, utmi);
+
+ /* Ensure the PHY is powered off */
+ utmi->caps->ops->power_off(utmi->phy);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static struct platform_driver mvebu_a3700_utmi_driver = {
+ .probe = mvebu_a3700_utmi_phy_probe,
+ .driver = {
+ .name = "mvebu-a3700-utmi-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = mvebu_a3700_utmi_of_match,
+ },
+};
+module_platform_driver(mvebu_a3700_utmi_driver);
+
+MODULE_AUTHOR("Igal Liberman <igall@marvell.com>");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Marvell EBU A3700 UTMI PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 187cccde53b5086e66f5ecc393401c398aa77f7e..d98e0451f6a18a85cd3d1113912f29a3dcb44a4d 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -580,8 +580,6 @@ static struct phy *mvebu_comphy_xlate(struct device *dev,
return phy;
lane = phy_get_drvdata(phy);
- if (lane->port >= 0)
- return ERR_PTR(-EBUSY);
lane->port = args->args[0];
return phy;
diff --git a/drivers/phy/marvell/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
index 768ce92e81ce7634f767612a99f37025185422db..369fece2be7a60e16e7b64acf12b29b310e32884 100644
--- a/drivers/phy/marvell/phy-mvebu-sata.c
+++ b/drivers/phy/marvell/phy-mvebu-sata.c
@@ -10,7 +10,7 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/clk.h>
#include <linux/phy/phy.h>
#include <linux/io.h>
@@ -122,7 +122,6 @@ static const struct of_device_id phy_mvebu_sata_of_match[] = {
{ .compatible = "marvell,mvebu-sata-phy" },
{ },
};
-MODULE_DEVICE_TABLE(of, phy_mvebu_sata_of_match);
static struct platform_driver phy_mvebu_sata_driver = {
.probe = phy_mvebu_sata_probe,
@@ -131,8 +130,4 @@ static struct platform_driver phy_mvebu_sata_driver = {
.of_match_table = phy_mvebu_sata_of_match,
}
};
-module_platform_driver(phy_mvebu_sata_driver);
-
-MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
-MODULE_DESCRIPTION("Marvell MVEBU SATA PHY driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(phy_mvebu_sata_driver);
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index 465fa1b91a5f4e74f3c86efab08d7e02dc88d2de..14e0551cd3190f71aeb85f0318c3d71c455836de 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -65,12 +65,12 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
*/
cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui);
- cfg->init = 100000000;
+ cfg->init = 100;
cfg->lpx = 60000;
cfg->ta_get = 5 * cfg->lpx;
cfg->ta_go = 4 * cfg->lpx;
cfg->ta_sure = 2 * cfg->lpx;
- cfg->wakeup = 1000000000;
+ cfg->wakeup = 1000;
cfg->hs_clk_rate = hs_clk_rate;
cfg->lanes = lanes;
@@ -143,7 +143,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg)
if (cfg->hs_trail < max(8 * ui, 60000 + 4 * ui))
return -EINVAL;
- if (cfg->init < 100000000)
+ if (cfg->init < 100)
return -EINVAL;
if (cfg->lpx < 50000)
@@ -158,7 +158,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg)
if (cfg->ta_sure < cfg->lpx || cfg->ta_sure > (2 * cfg->lpx))
return -EINVAL;
- if (cfg->wakeup < 1000000000)
+ if (cfg->wakeup < 1000)
return -EINVAL;
return 0;
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 19b05e824ee49f556d285617cbd6724156754507..cb38f6e8614c9b7f864c080fd41fd10891f8430f 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -1112,14 +1112,4 @@ static int __init phy_core_init(void)
return 0;
}
-module_init(phy_core_init);
-
-static void __exit phy_core_exit(void)
-{
- class_destroy(phy_class);
-}
-module_exit(phy_core_exit);
-
-MODULE_DESCRIPTION("Generic PHY Framework");
-MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
-MODULE_LICENSE("GPL v2");
+device_initcall(phy_core_init);
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b4006818e1b658504eb21b7653c43835d54ee624..08d6f6f7f03955450238418e74c8b5257d3bd4d9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -687,6 +687,116 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
};
+static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
@@ -1036,6 +1146,33 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
.no_pcs_sw_reset = true,
};
+static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
+ .tx_tbl = msm8998_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
+ .rx_tbl = msm8998_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
+ .pcs_tbl = msm8998_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .mask_pcs_ready = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
static void qcom_qmp_phy_configure(void __iomem *base,
const unsigned int *regs,
const struct qmp_phy_init_tbl tbl[],
@@ -1735,6 +1872,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,msm8996-qmp-usb3-phy",
.data = &msm8996_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
}, {
.compatible = "qcom,ipq8074-qmp-pcie-phy",
.data = &ipq8074_pciephy_cfg,
@@ -1747,6 +1887,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sdm845-qmp-ufs-phy",
.data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-usb3-phy",
+ .data = &msm8998_usb3phy_cfg,
},
{ },
};
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index d201cc307151cb5ed6ea126c5d008dfa1a3c2c1e..a1b6cdee9a089ca711dea70a8f6ed9e8cf8d959f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -174,6 +174,7 @@
#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1 0x0c4
#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1 0x0c8
#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1 0x0cc
+#define QSERDES_V3_COM_INTEGLOOP_INITVAL 0x0d0
#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0 0x0d8
#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0 0x0dc
#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1 0x0e0
@@ -201,6 +202,7 @@
#define QSERDES_V3_COM_DEBUG_BUS2 0x170
#define QSERDES_V3_COM_DEBUG_BUS3 0x174
#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178
+#define QSERDES_V3_COM_CMN_MODE 0x184
/* Only for QMP V3 PHY - TX registers */
#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044
@@ -211,6 +213,7 @@
#define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4
/* Only for QMP V3 PHY - RX registers */
+#define QSERDES_V3_RX_UCDR_FO_GAIN 0x008
#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
#define QSERDES_V3_RX_UCDR_SO_GAIN 0x014
#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024
@@ -219,6 +222,7 @@
#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030
#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
+#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040
#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044
#define QSERDES_V3_RX_RX_TERM_BW 0x07c
#define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 9177989f22d129c1d976388dda448d7a79bacd98..8fd7ce139772ab1886c43433a0ff58bcb90e24da 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -152,6 +152,31 @@ static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = {
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
};
+static const unsigned int msm8998_regs_layout[] = {
+ [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
+ [QUSB2PHY_PLL_STATUS] = 0x1a0,
+ [QUSB2PHY_PORT_TUNE1] = 0x23c,
+ [QUSB2PHY_PORT_TUNE2] = 0x240,
+ [QUSB2PHY_PORT_TUNE3] = 0x244,
+ [QUSB2PHY_PORT_TUNE4] = 0x248,
+ [QUSB2PHY_PORT_TEST1] = 0x24c,
+ [QUSB2PHY_PORT_TEST2] = 0x250,
+ [QUSB2PHY_PORT_POWERDOWN] = 0x210,
+ [QUSB2PHY_INTR_CTRL] = 0x22c,
+};
+
+static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x13),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xa5),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x09),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
+};
+
static const unsigned int sdm845_regs_layout[] = {
[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
[QUSB2PHY_PLL_STATUS] = 0x1a0,
@@ -221,6 +246,18 @@ static const struct qusb2_phy_cfg msm8996_phy_cfg = {
.autoresume_en = BIT(3),
};
+static const struct qusb2_phy_cfg msm8998_phy_cfg = {
+ .tbl = msm8998_init_tbl,
+ .tbl_num = ARRAY_SIZE(msm8998_init_tbl),
+ .regs = msm8998_regs_layout,
+
+ .disable_ctrl = POWER_DOWN,
+ .mask_core_ready = CORE_READY_STATUS,
+ .has_pll_override = true,
+ .autoresume_en = BIT(0),
+ .update_tune1_with_efuse = true,
+};
+
static const struct qusb2_phy_cfg sdm845_phy_cfg = {
.tbl = sdm845_init_tbl,
.tbl_num = ARRAY_SIZE(sdm845_init_tbl),
@@ -733,6 +770,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
{
.compatible = "qcom,msm8996-qusb2-phy",
.data = &msm8996_phy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qusb2-phy",
+ .data = &msm8998_phy_cfg,
}, {
.compatible = "qcom,sdm845-qusb2-phy",
.data = &sdm845_phy_cfg,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index 681644e43248c48d5dd3259305d24d05d0657efb..f798fb64de94e3f8b7d189dc51ae59cd7bb9bea6 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
@@ -23,24 +23,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
-
-#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
-({ \
- ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
- might_sleep_if(timeout_us); \
- for (;;) { \
- (val) = readl(addr); \
- if (cond) \
- break; \
- if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
- (val) = readl(addr); \
- break; \
- } \
- if (sleep_us) \
- usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
- } \
- (cond) ? 0 : -ETIMEDOUT; \
-})
+#include <linux/iopoll.h>
#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \
{ \
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 91fba60267a06f6da2f572cdeb740215738c5827..ba07121c3eff626fcf1d0a9411346cb83006bd0e 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -55,16 +55,16 @@ enum rockchip_usb2phy_host_state {
};
/**
- * Different states involved in USB charger detection.
- * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
+ * enum usb_chg_state - Different states involved in USB charger detection.
+ * @USB_CHG_STATE_UNDEFINED: USB charger is not connected or detection
* process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
+ * @USB_CHG_STATE_WAIT_FOR_DCD: Waiting for Data pins contact.
+ * @USB_CHG_STATE_DCD_DONE: Data pin contact is detected.
+ * @USB_CHG_STATE_PRIMARY_DONE: Primary detection is completed (Detects
* between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
- * between DCP and CDP).
- * USB_CHG_STATE_DETECTED USB charger type is determined.
+ * @USB_CHG_STATE_SECONDARY_DONE: Secondary detection is completed (Detects
+ * between DCP and CDP).
+ * @USB_CHG_STATE_DETECTED: USB charger type is determined.
*/
enum usb_chg_state {
USB_CHG_STATE_UNDEFINED = 0,
@@ -94,7 +94,7 @@ struct usb2phy_reg {
};
/**
- * struct rockchip_chg_det_reg: usb charger detect registers
+ * struct rockchip_chg_det_reg - usb charger detect registers
* @cp_det: charging port detected successfully.
* @dcp_det: dedicated charging port detected successfully.
* @dp_det: assert data pin connect successfully.
@@ -120,7 +120,7 @@ struct rockchip_chg_det_reg {
};
/**
- * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
+ * struct rockchip_usb2phy_port_cfg - usb-phy port configuration.
* @phy_sus: phy suspend register.
* @bvalid_det_en: vbus valid rise detection enable register.
* @bvalid_det_st: vbus valid rise detection status register.
@@ -148,10 +148,11 @@ struct rockchip_usb2phy_port_cfg {
};
/**
- * struct rockchip_usb2phy_cfg: usb-phy configuration.
+ * struct rockchip_usb2phy_cfg - usb-phy configuration.
* @reg: the address offset of grf for usb-phy config.
* @num_ports: specify how many ports that the phy has.
* @clkout_ctl: keep on/turn off output clk of phy.
+ * @port_cfgs: usb-phy port configurations.
* @chg_det: charger detection registers.
*/
struct rockchip_usb2phy_cfg {
@@ -163,12 +164,10 @@ struct rockchip_usb2phy_cfg {
};
/**
- * struct rockchip_usb2phy_port: usb-phy port data.
+ * struct rockchip_usb2phy_port - usb-phy port data.
+ * @phy: generic phy.
* @port_id: flag for otg port or host port.
* @suspended: phy suspended flag.
- * @utmi_avalid: utmi avalid status usage flag.
- * true - use avalid to get vbus status
- * flase - use bvalid to get vbus status
* @vbus_attached: otg device vbus status.
* @bvalid_irq: IRQ number assigned for vbus valid rise detection.
* @ls_irq: IRQ number assigned for linestate detection.
@@ -178,7 +177,7 @@ struct rockchip_usb2phy_cfg {
* @chg_work: charge detect work.
* @otg_sm_work: OTG state machine work.
* @sm_work: HOST state machine work.
- * @phy_cfg: port register configuration, assigned by driver data.
+ * @port_cfg: port register configuration, assigned by driver data.
* @event_nb: hold event notification callback.
* @state: define OTG enumeration states before device reset.
* @mode: the dr_mode of the controller.
@@ -187,7 +186,6 @@ struct rockchip_usb2phy_port {
struct phy *phy;
unsigned int port_id;
bool suspended;
- bool utmi_avalid;
bool vbus_attached;
int bvalid_irq;
int ls_irq;
@@ -203,12 +201,13 @@ struct rockchip_usb2phy_port {
};
/**
- * struct rockchip_usb2phy: usb2.0 phy driver data.
+ * struct rockchip_usb2phy - usb2.0 phy driver data.
+ * @dev: pointer to device.
* @grf: General Register Files regmap.
* @usbgrf: USB General Register Files regmap.
* @clk: clock struct of phy input clk.
* @clk480m: clock struct of phy output clk.
- * @clk_hw: clock struct of phy output clk management.
+ * @clk480m_hw: clock struct of phy output clk management.
* @chg_state: states involved in USB charger detection.
* @chg_type: USB charger types.
* @dcd_retries: The retry count used to track Data contact
@@ -542,12 +541,8 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
unsigned long delay;
bool vbus_attach, sch_work, notify_charger;
- if (rport->utmi_avalid)
- vbus_attach = property_enabled(rphy->grf,
- &rport->port_cfg->utmi_avalid);
- else
- vbus_attach = property_enabled(rphy->grf,
- &rport->port_cfg->utmi_bvalid);
+ vbus_attach = property_enabled(rphy->grf,
+ &rport->port_cfg->utmi_bvalid);
sch_work = false;
notify_charger = false;
@@ -1021,9 +1016,6 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
- rport->utmi_avalid =
- of_property_read_bool(child_np, "rockchip,utmi-avalid");
-
/*
* Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
* interrupts muxed together, so probe the otg-mux interrupt first,
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index c4709ed7fb0e72b78b58cb871c63aecf93189e03..103efc456a12eb7cd48742ff3f0fe12e147fe48b 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -33,12 +33,11 @@ config OMAP_CONTROL_PHY
config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || ARCH_K3
depends on USB_SUPPORT
select GENERIC_PHY
select USB_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
+ select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
@@ -50,7 +49,6 @@ config TI_PIPE3
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select GENERIC_PHY
select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
help
Enable this to support the PIPE3 PHY that is part of TI SOCs. This
driver takes care of all the PHY functionality apart from comparator.
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index fe909fd8144f95df33d29ee346ff9eae19325d7c..e871f2983a0e99364bc21d93b7762e8acc760930 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -36,6 +36,10 @@
#define USB2PHY_DISCON_BYP_LATCH (1 << 31)
#define USB2PHY_ANA_CONFIG1 0x4c
+#define AM654_USB2_OTG_PD BIT(8)
+#define AM654_USB2_VBUS_DET_EN BIT(5)
+#define AM654_USB2_VBUSVALID_DET_EN BIT(4)
+
/**
* omap_usb2_set_comparator - links the comparator present in the sytem with
* this phy
@@ -135,9 +139,9 @@ static int omap_usb_power_on(struct phy *x)
static int omap_usb2_disable_clocks(struct omap_usb *phy)
{
- clk_disable(phy->wkupclk);
+ clk_disable_unprepare(phy->wkupclk);
if (!IS_ERR(phy->optclk))
- clk_disable(phy->optclk);
+ clk_disable_unprepare(phy->optclk);
return 0;
}
@@ -146,14 +150,14 @@ static int omap_usb2_enable_clocks(struct omap_usb *phy)
{
int ret;
- ret = clk_enable(phy->wkupclk);
+ ret = clk_prepare_enable(phy->wkupclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
goto err0;
}
if (!IS_ERR(phy->optclk)) {
- ret = clk_enable(phy->optclk);
+ ret = clk_prepare_enable(phy->optclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
goto err1;
@@ -245,6 +249,15 @@ static const struct usb_phy_data am437x_usb2_data = {
.power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
};
+static const struct usb_phy_data am654_usb2_data = {
+ .label = "am654_usb2",
+ .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
+ AM654_USB2_VBUSVALID_DET_EN,
+ .power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
+ .power_off = AM654_USB2_OTG_PD,
+};
+
static const struct of_device_id omap_usb2_id_table[] = {
{
.compatible = "ti,omap-usb2",
@@ -266,6 +279,10 @@ static const struct of_device_id omap_usb2_id_table[] = {
.compatible = "ti,am437x-usb2",
.data = &am437x_usb2_data,
},
+ {
+ .compatible = "ti,am654-usb2",
+ .data = &am654_usb2_data,
+ },
{},
};
MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
@@ -346,63 +363,72 @@ static int omap_usb2_probe(struct platform_device *pdev)
}
}
- otg->set_host = omap_usb_set_host;
- otg->set_peripheral = omap_usb_set_peripheral;
- if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
- otg->set_vbus = omap_usb_set_vbus;
- if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
- otg->start_srp = omap_usb_start_srp;
- otg->usb_phy = &phy->phy;
-
- platform_set_drvdata(pdev, phy);
- pm_runtime_enable(phy->dev);
-
- generic_phy = devm_phy_create(phy->dev, NULL, &ops);
- if (IS_ERR(generic_phy)) {
- pm_runtime_disable(phy->dev);
- return PTR_ERR(generic_phy);
- }
-
- phy_set_drvdata(generic_phy, phy);
- omap_usb_power_off(generic_phy);
-
- phy_provider = devm_of_phy_provider_register(phy->dev,
- of_phy_simple_xlate);
- if (IS_ERR(phy_provider)) {
- pm_runtime_disable(phy->dev);
- return PTR_ERR(phy_provider);
- }
phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
- dev_warn(&pdev->dev, "unable to get wkupclk, trying old name\n");
+ if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
+ PTR_ERR(phy->wkupclk));
phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
+
if (IS_ERR(phy->wkupclk)) {
- dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
- pm_runtime_disable(phy->dev);
+ if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
return PTR_ERR(phy->wkupclk);
} else {
dev_warn(&pdev->dev,
"found usb_phy_cm_clk32k, please fix DTS\n");
}
}
- clk_prepare(phy->wkupclk);
phy->optclk = devm_clk_get(phy->dev, "refclk");
if (IS_ERR(phy->optclk)) {
+ if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
+
if (IS_ERR(phy->optclk)) {
- dev_dbg(&pdev->dev,
- "unable to get usb_otg_ss_refclk960m\n");
+ if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
+ dev_dbg(&pdev->dev,
+ "unable to get usb_otg_ss_refclk960m\n");
+ }
} else {
dev_warn(&pdev->dev,
"found usb_otg_ss_refclk960m, please fix DTS\n");
}
}
- if (!IS_ERR(phy->optclk))
- clk_prepare(phy->optclk);
+ otg->set_host = omap_usb_set_host;
+ otg->set_peripheral = omap_usb_set_peripheral;
+ if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
+ otg->set_vbus = omap_usb_set_vbus;
+ if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
+ otg->start_srp = omap_usb_start_srp;
+ otg->usb_phy = &phy->phy;
+
+ platform_set_drvdata(pdev, phy);
+ pm_runtime_enable(phy->dev);
+
+ generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+ if (IS_ERR(generic_phy)) {
+ pm_runtime_disable(phy->dev);
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+ omap_usb_power_off(generic_phy);
+
+ phy_provider = devm_of_phy_provider_register(phy->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ pm_runtime_disable(phy->dev);
+ return PTR_ERR(phy_provider);
+ }
+
usb_add_phy_dev(&phy->phy);
@@ -413,9 +439,6 @@ static int omap_usb2_remove(struct platform_device *pdev)
{
struct omap_usb *phy = platform_get_drvdata(pdev);
- clk_unprepare(phy->wkupclk);
- if (!IS_ERR(phy->optclk))
- clk_unprepare(phy->optclk);
usb_remove_phy(&phy->phy);
pm_runtime_disable(phy->dev);
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index 02bc74608cf3ee6f01181e0f457be00f3aeac5d9..6fa3cced6f8e5809a8681750d940c4a09199b56c 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -32,7 +32,7 @@ struct cht_int33fe_data {
struct i2c_client *fusb302;
struct i2c_client *pi3usb30532;
/* Contain a list-head must be per device */
- struct device_connection connections[5];
+ struct device_connection connections[4];
};
/*
@@ -174,16 +174,13 @@ static int cht_int33fe_probe(struct platform_device *pdev)
data->connections[0].endpoint[0] = "port0";
data->connections[0].endpoint[1] = "i2c-pi3usb30532";
- data->connections[0].id = "typec-switch";
+ data->connections[0].id = "orientation-switch";
data->connections[1].endpoint[0] = "port0";
data->connections[1].endpoint[1] = "i2c-pi3usb30532";
- data->connections[1].id = "typec-mux";
- data->connections[2].endpoint[0] = "port0";
- data->connections[2].endpoint[1] = "i2c-pi3usb30532";
- data->connections[2].id = "idff01m01";
- data->connections[3].endpoint[0] = "i2c-fusb302";
- data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
- data->connections[3].id = "usb-role-switch";
+ data->connections[1].id = "mode-switch";
+ data->connections[2].endpoint[0] = "i2c-fusb302";
+ data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
+ data->connections[2].id = "usb-role-switch";
device_connections_add(data->connections);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 70e6c956c23cefe12e37ee0bbb8fa7617088dd8c..e4b27413f528e73a9f7f5ce1862b99b1cf04d455 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB device configuration
#
diff --git a/drivers/usb/README b/drivers/usb/README
deleted file mode 100644
index 2144e7dbfa4142a1089b9d746637d1f703d536ef..0000000000000000000000000000000000000000
--- a/drivers/usb/README
+++ /dev/null
@@ -1,54 +0,0 @@
-To understand all the Linux-USB framework, you'll use these resources:
-
- * This source code. This is necessarily an evolving work, and
- includes kerneldoc that should help you get a current overview.
- ("make pdfdocs", and then look at "usb.pdf" for host side and
- "gadget.pdf" for peripheral side.) Also, Documentation/usb has
- more information.
-
- * The USB 2.0 specification (from www.usb.org), with supplements
- such as those for USB OTG and the various device classes.
- The USB specification has a good overview chapter, and USB
- peripherals conform to the widely known "Chapter 9".
-
- * Chip specifications for USB controllers. Examples include
- host controllers (on PCs, servers, and more); peripheral
- controllers (in devices with Linux firmware, like printers or
- cell phones); and hard-wired peripherals like Ethernet adapters.
-
- * Specifications for other protocols implemented by USB peripheral
- functions. Some are vendor-specific; others are vendor-neutral
- but just standardized outside of the www.usb.org team.
-
-Here is a list of what each subdirectory here is, and what is contained in
-them.
-
-core/ - This is for the core USB host code, including the
- usbfs files and the hub class driver ("hub_wq").
-
-host/ - This is for USB host controller drivers. This
- includes UHCI, OHCI, EHCI, and others that might
- be used with more specialized "embedded" systems.
-
-gadget/ - This is for USB peripheral controller drivers and
- the various gadget drivers which talk to them.
-
-
-Individual USB driver directories. A new driver should be added to the
-first subdirectory in the list below that it fits into.
-
-image/ - This is for still image drivers, like scanners or
- digital cameras.
-../input/ - This is for any driver that uses the input subsystem,
- like keyboard, mice, touchscreens, tablets, etc.
-../media/ - This is for multimedia drivers, like video cameras,
- radios, and any other drivers that talk to the v4l
- subsystem.
-../net/ - This is for network drivers.
-serial/ - This is for USB to serial drivers.
-storage/ - This is for USB mass-storage drivers.
-class/ - This is for all USB device drivers that do not fit
- into any of the above categories, and work for a range
- of USB Class specified devices.
-misc/ - This is for all USB device drivers that do not fit
- into any of the above categories.
diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
index 0f922942a07aca8a114058cb9f36a7899229bec9..989aaa3b080d67d3cb4a431516737b4b7ba28f82 100644
--- a/drivers/usb/atm/Kconfig
+++ b/drivers/usb/atm/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB/ATM DSL configuration
#
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index ee34e9046f7ea201f53e79d3e8725d9c937b0d88..eb37ebfcb123cf6247801b1d748b5b591da25fd8 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config USB_CHIPIDEA
tristate "ChipIdea Highspeed Dual Role Controller"
depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 9b45aa422e696e96f6038aed9fadc6a1a1527956..ceec8d5985d4677867de8ae6f525c06d7840ab5c 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -7,10 +7,8 @@
#include <linux/module.h>
#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/dma-mapping.h>
#include <linux/usb/chipidea.h>
#include <linux/usb/of.h>
#include <linux/clk.h>
@@ -152,8 +150,8 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
dev_warn(dev, "No over current polarity defined\n");
}
- if (of_find_property(np, "external-vbus-divider", NULL))
- data->evdo = 1;
+ data->pwr_pol = of_property_read_bool(np, "power-active-high");
+ data->evdo = of_property_read_bool(np, "external-vbus-divider");
if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
data->ulpi = 1;
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index 7cc53e2ce564e4722029fd97ae798edde4586d2d..c842e03f8767bcdf2f6a756c7ffed723ce46a7fb 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -18,6 +18,7 @@ struct imx_usbmisc_data {
/* true if dt specifies polarity */
unsigned int oc_pol_configured:1;
+ unsigned int pwr_pol:1; /* power polarity */
unsigned int evdo:1; /* set external vbus divider option */
unsigned int ulpi:1; /* connected to an ULPI phy */
unsigned int hsic:1; /* HSIC controlller */
diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
index 772851bee99b6bfe74396cbdf89dc9665c15a459..12025358bb3c23e7d66b167084e41f5f4d685c31 100644
--- a/drivers/usb/chipidea/ci_hdrc_tegra.c
+++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
@@ -130,6 +130,7 @@ static int tegra_udc_remove(struct platform_device *pdev)
{
struct tegra_udc *udc = platform_get_drvdata(pdev);
+ ci_hdrc_remove_device(udc->dev);
usb_phy_set_suspend(udc->phy, 1);
clk_disable_unprepare(udc->clk);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 7bfcbb23c2a42b53e1566788b53b46d7d7c9cc9c..27749ace2d939754c1cce8eb25bee996516c230e 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -954,25 +954,47 @@ static int ci_hdrc_probe(struct platform_device *pdev)
} else if (ci->platdata->usb_phy) {
ci->usb_phy = ci->platdata->usb_phy;
} else {
+ /* Look for a generic PHY first */
ci->phy = devm_phy_get(dev->parent, "usb-phy");
- ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2);
- /* if both generic PHY and USB PHY layers aren't enabled */
- if (PTR_ERR(ci->phy) == -ENOSYS &&
- PTR_ERR(ci->usb_phy) == -ENXIO) {
- ret = -ENXIO;
+ if (PTR_ERR(ci->phy) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
goto ulpi_exit;
+ } else if (IS_ERR(ci->phy)) {
+ ci->phy = NULL;
}
- if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) {
- ret = -EPROBE_DEFER;
- goto ulpi_exit;
+ /* Look for a legacy USB PHY from device-tree next */
+ if (!ci->phy) {
+ ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent,
+ "phys", 0);
+
+ if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto ulpi_exit;
+ } else if (IS_ERR(ci->usb_phy)) {
+ ci->usb_phy = NULL;
+ }
}
- if (IS_ERR(ci->phy))
- ci->phy = NULL;
- else if (IS_ERR(ci->usb_phy))
- ci->usb_phy = NULL;
+ /* Look for any registered legacy USB PHY as last resort */
+ if (!ci->phy && !ci->usb_phy) {
+ ci->usb_phy = devm_usb_get_phy(dev->parent,
+ USB_PHY_TYPE_USB2);
+
+ if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto ulpi_exit;
+ } else if (IS_ERR(ci->usb_phy)) {
+ ci->usb_phy = NULL;
+ }
+ }
+
+ /* No USB PHY was found in the end */
+ if (!ci->phy && !ci->usb_phy) {
+ ret = -ENXIO;
+ goto ulpi_exit;
+ }
}
ret = ci_usb_phy_init(ci);
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 097ffbca0bd9b0a6b6415fbfc11d5c1f562692c6..d8b67e150b129b04f9b64dc98bbdba15af0550c1 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -63,6 +63,7 @@
#define MX6_BM_NON_BURST_SETTING BIT(1)
#define MX6_BM_OVER_CUR_DIS BIT(7)
#define MX6_BM_OVER_CUR_POLARITY BIT(8)
+#define MX6_BM_PWR_POLARITY BIT(9)
#define MX6_BM_WAKEUP_ENABLE BIT(10)
#define MX6_BM_UTMI_ON_CLOCK BIT(13)
#define MX6_BM_ID_WAKEUP BIT(16)
@@ -383,6 +384,9 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
else if (data->oc_pol_configured)
reg &= ~MX6_BM_OVER_CUR_POLARITY;
}
+ /* If the polarity is not set keep it as setup by the bootlader */
+ if (data->pwr_pol == 1)
+ reg |= MX6_BM_PWR_POLARITY;
writel(reg, usbmisc->base + data->index * 4);
/* SoC non-burst setting */
@@ -585,6 +589,9 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
else if (data->oc_pol_configured)
reg &= ~MX6_BM_OVER_CUR_POLARITY;
}
+ /* If the polarity is not set keep it as setup by the bootlader */
+ if (data->pwr_pol == 1)
+ reg |= MX6_BM_PWR_POLARITY;
writel(reg, usbmisc->base);
reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index 971385fe9abce65689baf82988c5183edb054b82..52f3a531a82f242334e4081ee3c39edcff7ee8e9 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Class driver configuration
#
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index bec581fb7c6361891a81a3a0aa88d3863b686f58..9e9caff905d52abcdb2048c6e580d1f17eb3cf9d 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -1099,7 +1099,7 @@ static int wdm_post_reset(struct usb_interface *intf)
rv = recover_from_urb_loss(desc);
mutex_unlock(&desc->wlock);
mutex_unlock(&desc->rlock);
- return 0;
+ return rv;
}
static struct usb_driver wdm_driver = {
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 4d75d9a80001eda9039d853871969938b4b82a41..bdb6bd0b63a67e7346a35e2f474a4dbc16c9c191 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Core configuration
#
@@ -90,3 +91,15 @@ config USB_LEDS_TRIGGER_USBPORT
This driver allows LEDs to be controlled by USB events. Enabling this
trigger allows specifying list of USB ports that should turn on LED
when some USB device gets connected.
+
+config USB_AUTOSUSPEND_DELAY
+ int "Default autosuspend delay"
+ depends on USB
+ default 2
+ help
+ The default autosuspend delay in seconds. Can be overridden
+ with the usbcore.autosuspend command line or module parameter.
+
+ The default value Linux has always had is 2 seconds. Change
+ this value if you want a different delay and cannot modify
+ the command line or module parameter.
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 7b5cb28ffb3578c8785ee4e0ca541c88846890be..20ff036b4c22d2812ff89732885d596e868f91e3 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -552,7 +552,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
unsigned char *buffer2;
int size2;
struct usb_descriptor_header *header;
- int len, retval;
+ int retval;
u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
unsigned iad_num = 0;
@@ -707,8 +707,8 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
nalts[i] = j = USB_MAXALTSETTING;
}
- len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
- config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
+ intfc = kzalloc(struct_size(intfc, altsetting, j), GFP_KERNEL);
+ config->intf_cache[i] = intfc;
if (!intfc)
return -ENOMEM;
kref_init(&intfc->ref);
@@ -800,13 +800,11 @@ int usb_get_configuration(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
int ncfg = dev->descriptor.bNumConfigurations;
- int result = 0;
+ int result = -ENOMEM;
unsigned int cfgno, length;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
- cfgno = 0;
- result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
@@ -832,8 +830,7 @@ int usb_get_configuration(struct usb_device *dev)
if (!desc)
goto err2;
- result = 0;
- for (; cfgno < ncfg; cfgno++) {
+ for (cfgno = 0; cfgno < ncfg; cfgno++) {
/* We grab just the first descriptor so we know how long
* the whole configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
@@ -889,7 +886,6 @@ int usb_get_configuration(struct usb_device *dev)
goto err;
}
}
- result = 0;
err:
kfree(desc);
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index d65566341dd1c941932df3cb43b9675ed83f015c..fa783531ee889140d580e19a489cede393f12a10 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -604,7 +604,7 @@ static void async_completed(struct urb *urb)
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length,
as->status, COMPLETE, NULL, 0);
- if ((urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN)
+ if (usb_urb_dir_in(urb))
snoop_urb_data(urb, urb->actual_length);
if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET &&
@@ -1564,12 +1564,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
}
for (totlen = u = 0; u < number_of_packets; u++) {
/*
- * arbitrary limit need for USB 3.0
- * bMaxBurst (0~15 allowed, 1~16 packets)
- * bmAttributes (bit 1:0, mult 0~2, 1~3 packets)
- * sizemax: 1024 * 16 * 3 = 49152
+ * arbitrary limit need for USB 3.1 Gen2
+ * sizemax: 96 DPs at SSP, 96 * 1024 = 98304
*/
- if (isopkt[u].length > 49152) {
+ if (isopkt[u].length > 98304) {
ret = -EINVAL;
goto error;
}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 53564386ed578984f8cf247612a83d684d0cb06a..8987cec9549dd0d7fd75323c405504efb33e296a 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1896,14 +1896,11 @@ int usb_runtime_idle(struct device *dev)
return -EBUSY;
}
-int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+static int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
{
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
int ret = -EPERM;
- if (enable && !udev->usb2_hw_lpm_allowed)
- return 0;
-
if (hcd->driver->set_usb2_hw_lpm) {
ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable);
if (!ret)
@@ -1913,6 +1910,24 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
return ret;
}
+int usb_enable_usb2_hardware_lpm(struct usb_device *udev)
+{
+ if (!udev->usb2_hw_lpm_capable ||
+ !udev->usb2_hw_lpm_allowed ||
+ udev->usb2_hw_lpm_enabled)
+ return 0;
+
+ return usb_set_usb2_hardware_lpm(udev, 1);
+}
+
+int usb_disable_usb2_hardware_lpm(struct usb_device *udev)
+{
+ if (!udev->usb2_hw_lpm_enabled)
+ return 0;
+
+ return usb_set_usb2_hardware_lpm(udev, 0);
+}
+
#endif /* CONFIG_PM */
struct bus_type usb_bus_type = {
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index f713cecc1f419f25f8d5b9e142a26a3b684843ec..1ac9c1e5f773bc2ab12a80086ad3c3cd1c0e0b92 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -118,6 +118,31 @@ int usb_choose_configuration(struct usb_device *udev)
continue;
}
+ /*
+ * Select first configuration as default for audio so that
+ * devices that don't comply with UAC3 protocol are supported.
+ * But, still iterate through other configurations and
+ * select UAC3 compliant config if present.
+ */
+ if (desc && is_audio(desc)) {
+ /* Always prefer the first found UAC3 config */
+ if (is_uac3_config(desc)) {
+ best = c;
+ break;
+ }
+
+ /* If there is no UAC3 config, prefer the first config */
+ else if (i == 0)
+ best = c;
+
+ /* Unconditional continue, because the rest of the code
+ * in the loop is irrelevant for audio devices, and
+ * because it can reassign best, which for audio devices
+ * we don't want.
+ */
+ continue;
+ }
+
/* When the first config's first interface is one of Microsoft's
* pet nonstandard Ethernet-over-USB protocols, ignore it unless
* this kernel has enabled the necessary host side driver.
@@ -132,25 +157,6 @@ int usb_choose_configuration(struct usb_device *udev)
#endif
}
- /*
- * Select first configuration as default for audio so that
- * devices that don't comply with UAC3 protocol are supported.
- * But, still iterate through other configurations and
- * select UAC3 compliant config if present.
- */
- if (i == 0 && num_configs > 1 && desc && is_audio(desc)) {
- best = c;
- continue;
- }
-
- if (i > 0 && desc && is_audio(desc)) {
- if (is_uac3_config(desc)) {
- best = c;
- break;
- }
- continue;
- }
-
/* From the remaining configs, choose the first one whose
* first interface is for a non-vendor-specific class.
* Reason: Linux is more likely to have a class driver
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 015b126ce4555e8d58b8744e7666c384387e9ddf..3189181bb628d921309d44296da06eff92b5d1bd 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -373,13 +373,19 @@ static const u8 ss_rh_config_descriptor[] = {
* -1 is authorized for all devices except wireless (old behaviour)
* 0 is unauthorized for all devices
* 1 is authorized for all devices
+ * 2 is authorized for internal devices
*/
-static int authorized_default = -1;
+#define USB_AUTHORIZE_WIRED -1
+#define USB_AUTHORIZE_NONE 0
+#define USB_AUTHORIZE_ALL 1
+#define USB_AUTHORIZE_INTERNAL 2
+
+static int authorized_default = USB_AUTHORIZE_WIRED;
module_param(authorized_default, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(authorized_default,
"Default USB device authorization: 0 is not authorized, 1 is "
- "authorized, -1 is authorized except for wireless USB (default, "
- "old behaviour");
+ "authorized, 2 is authorized for internal devices, -1 is "
+ "authorized except for wireless USB (default, old behaviour)");
/*-------------------------------------------------------------------------*/
/**
@@ -884,7 +890,7 @@ static ssize_t authorized_default_show(struct device *dev,
struct usb_hcd *hcd;
hcd = bus_to_hcd(usb_bus);
- return snprintf(buf, PAGE_SIZE, "%u\n", !!HCD_DEV_AUTHORIZED(hcd));
+ return snprintf(buf, PAGE_SIZE, "%u\n", hcd->dev_policy);
}
static ssize_t authorized_default_store(struct device *dev,
@@ -900,11 +906,8 @@ static ssize_t authorized_default_store(struct device *dev,
hcd = bus_to_hcd(usb_bus);
result = sscanf(buf, "%u\n", &val);
if (result == 1) {
- if (val)
- set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
- else
- clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
-
+ hcd->dev_policy = val <= USB_DEVICE_AUTHORIZE_INTERNAL ?
+ val : USB_DEVICE_AUTHORIZE_ALL;
result = size;
} else {
result = -EINVAL;
@@ -2736,6 +2739,11 @@ int usb_add_hcd(struct usb_hcd *hcd,
if (retval)
return retval;
+ retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
+ PHY_MODE_USB_HOST_SS);
+ if (retval)
+ goto err_usb_phy_roothub_power_on;
+
retval = usb_phy_roothub_power_on(hcd->phy_roothub);
if (retval)
goto err_usb_phy_roothub_power_on;
@@ -2743,18 +2751,26 @@ int usb_add_hcd(struct usb_hcd *hcd,
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
- /* Keep old behaviour if authorized_default is not in [0, 1]. */
- if (authorized_default < 0 || authorized_default > 1) {
- if (hcd->wireless)
- clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
- else
- set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
- } else {
- if (authorized_default)
- set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
- else
- clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
+ switch (authorized_default) {
+ case USB_AUTHORIZE_NONE:
+ hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
+ break;
+
+ case USB_AUTHORIZE_ALL:
+ hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
+ break;
+
+ case USB_AUTHORIZE_INTERNAL:
+ hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
+ break;
+
+ case USB_AUTHORIZE_WIRED:
+ default:
+ hcd->dev_policy = hcd->wireless ?
+ USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL;
+ break;
}
+
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
/* per default all interfaces are authorized */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1d1e61e980f38aabdeb334b16058bc0c00b24f42..8d4631c81b9f0e1882f61e4022b3873fb4aff556 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -108,6 +108,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
static void hub_release(struct kref *kref);
static int usb_reset_and_verify_device(struct usb_device *udev);
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
+static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
+ u16 portstatus);
static inline char *portspeed(struct usb_hub *hub, int portstatus)
{
@@ -607,6 +609,36 @@ static int hub_port_status(struct usb_hub *hub, int port1,
status, change, NULL);
}
+static void hub_resubmit_irq_urb(struct usb_hub *hub)
+{
+ unsigned long flags;
+ int status;
+
+ spin_lock_irqsave(&hub->irq_urb_lock, flags);
+
+ if (hub->quiescing) {
+ spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
+ return;
+ }
+
+ status = usb_submit_urb(hub->urb, GFP_ATOMIC);
+ if (status && status != -ENODEV && status != -EPERM &&
+ status != -ESHUTDOWN) {
+ dev_err(hub->intfdev, "resubmit --> %d\n", status);
+ mod_timer(&hub->irq_urb_retry, jiffies + HZ);
+ }
+
+ spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
+}
+
+static void hub_retry_irq_urb(struct timer_list *t)
+{
+ struct usb_hub *hub = from_timer(hub, t, irq_urb_retry);
+
+ hub_resubmit_irq_urb(hub);
+}
+
+
static void kick_hub_wq(struct usb_hub *hub)
{
struct usb_interface *intf;
@@ -709,12 +741,7 @@ static void hub_irq(struct urb *urb)
kick_hub_wq(hub);
resubmit:
- if (hub->quiescing)
- return;
-
- status = usb_submit_urb(hub->urb, GFP_ATOMIC);
- if (status != 0 && status != -ENODEV && status != -EPERM)
- dev_err(hub->intfdev, "resubmit --> %d\n", status);
+ hub_resubmit_irq_urb(hub);
}
/* USB 2.0 spec Section 11.24.2.3 */
@@ -1112,6 +1139,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
USB_PORT_FEAT_ENABLE);
}
+ /* Make sure a warm-reset request is handled by port_event */
+ if (type == HUB_RESUME &&
+ hub_port_warm_reset_required(hub, port1, portstatus))
+ set_bit(port1, hub->event_bits);
+
/*
* Add debounce if USB3 link is in polling/link training state.
* Link will automatically transition to Enabled state after
@@ -1264,10 +1296,13 @@ enum hub_quiescing_type {
static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
{
struct usb_device *hdev = hub->hdev;
+ unsigned long flags;
int i;
/* hub_wq and related activity won't re-trigger */
+ spin_lock_irqsave(&hub->irq_urb_lock, flags);
hub->quiescing = 1;
+ spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
if (type != HUB_SUSPEND) {
/* Disconnect all the children */
@@ -1278,6 +1313,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
}
/* Stop hub_wq and related activity */
+ del_timer_sync(&hub->irq_urb_retry);
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work_sync(&hub->leds);
@@ -1810,6 +1846,8 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
INIT_DELAYED_WORK(&hub->leds, led_work);
INIT_DELAYED_WORK(&hub->init_work, NULL);
INIT_WORK(&hub->events, hub_event);
+ spin_lock_init(&hub->irq_urb_lock);
+ timer_setup(&hub->irq_urb_retry, hub_retry_irq_urb, 0);
usb_get_intf(intf);
usb_get_dev(hdev);
@@ -3220,8 +3258,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
}
/* disable USB2 hardware LPM */
- if (udev->usb2_hw_lpm_enabled == 1)
- usb_set_usb2_hardware_lpm(udev, 0);
+ usb_disable_usb2_hardware_lpm(udev);
if (usb_disable_ltm(udev)) {
dev_err(&udev->dev, "Failed to disable LTM before suspend\n");
@@ -3259,8 +3296,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
usb_enable_ltm(udev);
err_ltm:
/* Try to enable USB2 hardware LPM again */
- if (udev->usb2_hw_lpm_capable == 1)
- usb_set_usb2_hardware_lpm(udev, 1);
+ usb_enable_usb2_hardware_lpm(udev);
if (udev->do_remote_wakeup)
(void) usb_disable_remote_wakeup(udev);
@@ -3543,8 +3579,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
hub_port_logical_disconnect(hub, port1);
} else {
/* Try to enable USB2 hardware LPM */
- if (udev->usb2_hw_lpm_capable == 1)
- usb_set_usb2_hardware_lpm(udev, 1);
+ usb_enable_usb2_hardware_lpm(udev);
/* Try to enable USB3 LTM */
usb_enable_ltm(udev);
@@ -4435,7 +4470,7 @@ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
udev->usb2_hw_lpm_allowed = 1;
- usb_set_usb2_hardware_lpm(udev, 1);
+ usb_enable_usb2_hardware_lpm(udev);
}
}
@@ -5649,8 +5684,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
/* Disable USB2 hardware LPM.
* It will be re-enabled by the enumeration process.
*/
- if (udev->usb2_hw_lpm_enabled == 1)
- usb_set_usb2_hardware_lpm(udev, 0);
+ usb_disable_usb2_hardware_lpm(udev);
/* Disable LPM while we reset the device and reinstall the alt settings.
* Device-initiated LPM, and system exit latency settings are cleared
@@ -5753,7 +5787,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
done:
/* Now that the alt settings are re-installed, enable LTM and LPM. */
- usb_set_usb2_hardware_lpm(udev, 1);
+ usb_enable_usb2_hardware_lpm(udev);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
usb_release_bos_descriptor(udev);
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 4accfb63f7dcbddf77c407bb46d84be2d33a3118..a9e24e4b8df146b30bfab2c8857a713ff6da7c97 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -69,6 +69,8 @@ struct usb_hub {
struct delayed_work leds;
struct delayed_work init_work;
struct work_struct events;
+ spinlock_t irq_urb_lock;
+ struct timer_list irq_urb_retry;
struct usb_port **ports;
};
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index bfa5eda0cc2606a79373651fd079f87526238f36..82239f27c4ccf822daca19fe2e9c6cffb19933c7 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1243,8 +1243,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
dev->actconfig->interface[i] = NULL;
}
- if (dev->usb2_hw_lpm_enabled == 1)
- usb_set_usb2_hardware_lpm(dev, 0);
+ usb_disable_usb2_hardware_lpm(dev);
usb_unlocked_disable_lpm(dev);
usb_disable_ltm(dev);
@@ -2007,6 +2006,13 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
for (i = 0; i < nintf; ++i) {
struct usb_interface *intf = cp->interface[i];
+ if (intf->dev.of_node &&
+ !of_device_is_available(intf->dev.of_node)) {
+ dev_info(&dev->dev, "skipping disabled interface %d\n",
+ intf->cur_altsetting->desc.bInterfaceNumber);
+ continue;
+ }
+
dev_dbg(&dev->dev,
"adding %s (config #%d, interface %d)\n",
dev_name(&intf->dev), configuration,
diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c
index 38b2c776c4b421a2b3e58d200cd37a8b4f4929e0..7580493b867a2f974f43d8a5fb774abf55d73b85 100644
--- a/drivers/usb/core/phy.c
+++ b/drivers/usb/core/phy.c
@@ -123,6 +123,34 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub)
}
EXPORT_SYMBOL_GPL(usb_phy_roothub_exit);
+int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
+ enum phy_mode mode)
+{
+ struct usb_phy_roothub *roothub_entry;
+ struct list_head *head;
+ int err;
+
+ if (!phy_roothub)
+ return 0;
+
+ head = &phy_roothub->list;
+
+ list_for_each_entry(roothub_entry, head, list) {
+ err = phy_set_mode(roothub_entry->phy, mode);
+ if (err)
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ list_for_each_entry_continue_reverse(roothub_entry, head, list)
+ phy_power_off(roothub_entry->phy);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_set_mode);
+
int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub)
{
struct usb_phy_roothub *roothub_entry;
diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h
index 88a3c037e9df59194ba94d3ecd7ec3e2626ccb33..dad564e2d2d42dff78d88a486fc30d7e255a2798 100644
--- a/drivers/usb/core/phy.h
+++ b/drivers/usb/core/phy.h
@@ -16,6 +16,8 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev);
int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub);
int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
+int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
+ enum phy_mode mode);
int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index ea18284dfa9af08a641aa30bae449c9d08ec0a6a..7e88fdfe3cf5c7c23ba7e9878904a8e72db7686c 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -528,7 +528,10 @@ static ssize_t usb2_hardware_lpm_store(struct device *dev,
if (!ret) {
udev->usb2_hw_lpm_allowed = value;
- ret = usb_set_usb2_hardware_lpm(udev, value);
+ if (value)
+ ret = usb_enable_usb2_hardware_lpm(udev);
+ else
+ ret = usb_disable_usb2_hardware_lpm(udev);
}
usb_unlock_device(udev);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index f51750bcd1528ba5aa3c8996b9dd0bc320ce8beb..0eab79f82ce41bd107de6e2997543a0aabfaf3a6 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -70,9 +70,8 @@ struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags)
{
struct urb *urb;
- urb = kmalloc(sizeof(struct urb) +
- iso_packets * sizeof(struct usb_iso_packet_descriptor),
- mem_flags);
+ urb = kmalloc(struct_size(urb, iso_frame_desc, iso_packets),
+ mem_flags);
if (!urb)
return NULL;
usb_init_urb(urb);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 4ebfbd737905169d1b96904952576defbd01e8f1..7fcb9f782931035b10fbeb3e6a50b897f6828e36 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -46,8 +46,7 @@
#include <linux/mm.h>
#include <linux/dma-mapping.h>
-#include "usb.h"
-
+#include "hub.h"
const char *usbcore_name = "usbcore";
@@ -65,8 +64,8 @@ int usb_disabled(void)
EXPORT_SYMBOL_GPL(usb_disabled);
#ifdef CONFIG_PM
-static int usb_autosuspend_delay = 2; /* Default delay value,
- * in seconds */
+/* Default delay value, in seconds */
+static int usb_autosuspend_delay = CONFIG_USB_AUTOSUSPEND_DELAY;
module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
@@ -536,6 +535,27 @@ static unsigned usb_bus_is_wusb(struct usb_bus *bus)
return hcd->wireless;
}
+static bool usb_dev_authorized(struct usb_device *dev, struct usb_hcd *hcd)
+{
+ struct usb_hub *hub;
+
+ if (!dev->parent)
+ return true; /* Root hub always ok [and always wired] */
+
+ switch (hcd->dev_policy) {
+ case USB_DEVICE_AUTHORIZE_NONE:
+ default:
+ return false;
+
+ case USB_DEVICE_AUTHORIZE_ALL:
+ return true;
+
+ case USB_DEVICE_AUTHORIZE_INTERNAL:
+ hub = usb_hub_to_struct_hub(dev->parent);
+ return hub->ports[dev->portnum - 1]->connect_type ==
+ USB_PORT_CONNECT_TYPE_HARD_WIRED;
+ }
+}
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
@@ -663,12 +683,11 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
dev->connect_time = jiffies;
dev->active_duration = -jiffies;
#endif
- if (root_hub) /* Root hub always ok [and always wired] */
- dev->authorized = 1;
- else {
- dev->authorized = !!HCD_DEV_AUTHORIZED(usb_hcd);
+
+ dev->authorized = usb_dev_authorized(dev, usb_hcd);
+ if (!root_hub)
dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
- }
+
return dev;
}
EXPORT_SYMBOL_GPL(usb_alloc_dev);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 546a2219454b2de9bbf7e72f07dc1ae3f3602b60..d95a5358f73df21ea3b1ba4cdea97bc0ad07c7ee 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -92,7 +92,8 @@ extern int usb_remote_wakeup(struct usb_device *dev);
extern int usb_runtime_suspend(struct device *dev);
extern int usb_runtime_resume(struct device *dev);
extern int usb_runtime_idle(struct device *dev);
-extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);
+extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev);
+extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev);
#else
@@ -112,7 +113,12 @@ static inline int usb_autoresume_device(struct usb_device *udev)
return 0;
}
-static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+static inline int usb_enable_usb2_hardware_lpm(struct usb_device *udev)
+{
+ return 0;
+}
+
+static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev)
{
return 0;
}
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index b6a495e98fd848a4965f586ca216beab346f53fc..68d095ae28651320fcb2117ff07caadab1220c66 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config USB_DWC2
tristate "DesignWare USB2 DRD Core Support"
depends on HAS_DMA
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 55ef3cc2701b999aa93d9bca90cc979bfb1cc08a..6812a8a3a98babe1258508d8a4645af9fdd07e87 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -768,22 +768,13 @@ static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
return desc_size;
}
-/*
- * dwc2_gadget_config_nonisoc_xfer_ddma - prepare non ISOC DMA desc chain.
- * @hs_ep: The endpoint
- * @dma_buff: DMA address to use
- * @len: Length of the transfer
- *
- * This function will iterate over descriptor chain and fill its entries
- * with corresponding information based on transfer data.
- */
-static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep,
+static void dwc2_gadget_fill_nonisoc_xfer_ddma_one(struct dwc2_hsotg_ep *hs_ep,
+ struct dwc2_dma_desc **desc,
dma_addr_t dma_buff,
- unsigned int len)
+ unsigned int len,
+ bool true_last)
{
- struct dwc2_hsotg *hsotg = hs_ep->parent;
int dir_in = hs_ep->dir_in;
- struct dwc2_dma_desc *desc = hs_ep->desc_list;
u32 mps = hs_ep->ep.maxpacket;
u32 maxsize = 0;
u32 offset = 0;
@@ -798,39 +789,77 @@ static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep,
hs_ep->desc_count = 1;
for (i = 0; i < hs_ep->desc_count; ++i) {
- desc->status = 0;
- desc->status |= (DEV_DMA_BUFF_STS_HBUSY
+ (*desc)->status = 0;
+ (*desc)->status |= (DEV_DMA_BUFF_STS_HBUSY
<< DEV_DMA_BUFF_STS_SHIFT);
if (len > maxsize) {
if (!hs_ep->index && !dir_in)
- desc->status |= (DEV_DMA_L | DEV_DMA_IOC);
+ (*desc)->status |= (DEV_DMA_L | DEV_DMA_IOC);
- desc->status |= (maxsize <<
- DEV_DMA_NBYTES_SHIFT & mask);
- desc->buf = dma_buff + offset;
+ (*desc)->status |=
+ maxsize << DEV_DMA_NBYTES_SHIFT & mask;
+ (*desc)->buf = dma_buff + offset;
len -= maxsize;
offset += maxsize;
} else {
- desc->status |= (DEV_DMA_L | DEV_DMA_IOC);
+ if (true_last)
+ (*desc)->status |= (DEV_DMA_L | DEV_DMA_IOC);
if (dir_in)
- desc->status |= (len % mps) ? DEV_DMA_SHORT :
- ((hs_ep->send_zlp) ? DEV_DMA_SHORT : 0);
- if (len > maxsize)
- dev_err(hsotg->dev, "wrong len %d\n", len);
+ (*desc)->status |= (len % mps) ? DEV_DMA_SHORT :
+ ((hs_ep->send_zlp && true_last) ?
+ DEV_DMA_SHORT : 0);
- desc->status |=
+ (*desc)->status |=
len << DEV_DMA_NBYTES_SHIFT & mask;
- desc->buf = dma_buff + offset;
+ (*desc)->buf = dma_buff + offset;
}
- desc->status &= ~DEV_DMA_BUFF_STS_MASK;
- desc->status |= (DEV_DMA_BUFF_STS_HREADY
+ (*desc)->status &= ~DEV_DMA_BUFF_STS_MASK;
+ (*desc)->status |= (DEV_DMA_BUFF_STS_HREADY
<< DEV_DMA_BUFF_STS_SHIFT);
- desc++;
+ (*desc)++;
+ }
+}
+
+/*
+ * dwc2_gadget_config_nonisoc_xfer_ddma - prepare non ISOC DMA desc chain.
+ * @hs_ep: The endpoint
+ * @ureq: Request to transfer
+ * @offset: offset in bytes
+ * @len: Length of the transfer
+ *
+ * This function will iterate over descriptor chain and fill its entries
+ * with corresponding information based on transfer data.
+ */
+static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep,
+ struct usb_request *ureq,
+ unsigned int offset,
+ unsigned int len)
+{
+ struct dwc2_dma_desc *desc = hs_ep->desc_list;
+ struct scatterlist *sg;
+ int i;
+ u8 desc_count = 0;
+
+ /* non-DMA sg buffer */
+ if (!ureq->num_sgs) {
+ dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc,
+ ureq->dma + offset, len, true);
+ return;
}
+
+ /* DMA sg buffer */
+ for_each_sg(ureq->sg, sg, ureq->num_sgs, i) {
+ dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc,
+ sg_dma_address(sg) + sg->offset, sg_dma_len(sg),
+ sg_is_last(sg));
+ desc_count += hs_ep->desc_count;
+ }
+
+ hs_ep->desc_count = desc_count;
}
/*
@@ -944,7 +973,13 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep)
hs_ep->next_desc = 0;
list_for_each_entry_safe(hs_req, treq, &hs_ep->queue, queue) {
- ret = dwc2_gadget_fill_isoc_desc(hs_ep, hs_req->req.dma,
+ dma_addr_t dma_addr = hs_req->req.dma;
+
+ if (hs_req->req.num_sgs) {
+ WARN_ON(hs_req->req.num_sgs > 1);
+ dma_addr = sg_dma_address(hs_req->req.sg);
+ }
+ ret = dwc2_gadget_fill_isoc_desc(hs_ep, dma_addr,
hs_req->req.length);
if (ret)
break;
@@ -1100,7 +1135,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
offset = ureq->actual;
/* Fill DDMA chain entries */
- dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, ureq->dma + offset,
+ dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, ureq, offset,
length);
/* write descriptor chain address to control register */
@@ -1399,7 +1434,13 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
*/
if (using_desc_dma(hs) && hs_ep->isochronous) {
if (hs_ep->target_frame != TARGET_FRAME_INITIAL) {
- dwc2_gadget_fill_isoc_desc(hs_ep, hs_req->req.dma,
+ dma_addr_t dma_addr = hs_req->req.dma;
+
+ if (hs_req->req.num_sgs) {
+ WARN_ON(hs_req->req.num_sgs > 1);
+ dma_addr = sg_dma_address(hs_req->req.sg);
+ }
+ dwc2_gadget_fill_isoc_desc(hs_ep, dma_addr,
hs_req->req.length);
}
return 0;
@@ -1987,13 +2028,12 @@ static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg,
dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n",
index);
if (using_desc_dma(hsotg)) {
- /* Not specific buffer needed for ep0 ZLP */
- dma_addr_t dma = hs_ep->desc_list_dma;
-
if (!index)
dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep);
- dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, dma, 0);
+ /* Not specific buffer needed for ep0 ZLP */
+ dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &hs_ep->desc_list,
+ hs_ep->desc_list_dma, 0, true);
} else {
dwc2_writel(hsotg, DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
DXEPTSIZ_XFERSIZE(0),
@@ -4005,6 +4045,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
ret = -ENOMEM;
goto error1;
}
+ epctrl &= ~(DXEPCTL_TXFNUM_LIMIT << DXEPCTL_TXFNUM_SHIFT);
hsotg->fifo_map |= 1 << fifo_index;
epctrl |= DXEPCTL_TXFNUM(fifo_index);
hs_ep->fifo_index = fifo_index;
@@ -4385,6 +4426,7 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
hsotg->enabled = 0;
spin_unlock_irqrestore(&hsotg->lock, flags);
+ gadget->sg_supported = using_desc_dma(hsotg);
dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
return 0;
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index dd82fa516f3f224e24d38428d9e53673092f1bd4..3f087962f498285261d91337e315024ae1833791 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3981,10 +3981,8 @@ static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
gfp_t mem_flags)
{
struct dwc2_hcd_urb *urb;
- u32 size = sizeof(*urb) + iso_desc_count *
- sizeof(struct dwc2_hcd_iso_packet_desc);
- urb = kzalloc(size, mem_flags);
+ urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags);
if (urb)
urb->packet_count = iso_desc_count;
return urb;
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 1a0404fda596b0699866c4729200e76ef0c9226f..2b1494460d0cb13c7c260b9b4e818918f2ef2099 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
depends on (USB || USB_GADGET) && HAS_DMA
@@ -86,11 +88,11 @@ config USB_DWC3_HAPS
platform, please say 'Y' or 'M' here.
config USB_DWC3_KEYSTONE
- tristate "Texas Instruments Keystone2 Platforms"
- depends on ARCH_KEYSTONE || COMPILE_TEST
+ tristate "Texas Instruments Keystone2/AM654 Platforms"
+ depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
default USB_DWC3
help
- Support of USB2/3 functionality in TI Keystone2 platforms.
+ Support of USB2/3 functionality in TI Keystone2 and AM654 platforms.
Say 'Y' or 'M' here if you have one such device
config USB_DWC3_OF_SIMPLE
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index df876418cb78091a1c751eb5f937c1719cc73919..1528d395b156e2db6bd6002985b7976d8627b09e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -692,7 +692,6 @@ struct dwc3_ep {
#define DWC3_EP_WEDGE BIT(2)
#define DWC3_EP_TRANSFER_STARTED BIT(3)
#define DWC3_EP_PENDING_REQUEST BIT(5)
-#define DWC3_EP_END_TRANSFER_PENDING BIT(7)
/* This last one is specific to EP0 */
#define DWC3_EP0_DIR_IN BIT(31)
@@ -863,6 +862,7 @@ struct dwc3_hwparams {
* @num_pending_sgs: counter to pending sgs
* @num_queued_sgs: counter to the number of sgs which already got queued
* @remaining: amount of data remaining
+ * @status: internal dwc3 request status tracking
* @epnum: endpoint number to which this request refers
* @trb: pointer to struct dwc3_trb
* @trb_dma: DMA address of @trb
@@ -871,7 +871,6 @@ struct dwc3_hwparams {
* or unaligned OUT)
* @direction: IN or OUT direction flag
* @mapped: true when request has been dma-mapped
- * @started: request is started
*/
struct dwc3_request {
struct usb_request request;
@@ -883,6 +882,14 @@ struct dwc3_request {
unsigned num_pending_sgs;
unsigned int num_queued_sgs;
unsigned remaining;
+
+ unsigned int status;
+#define DWC3_REQUEST_STATUS_QUEUED 0
+#define DWC3_REQUEST_STATUS_STARTED 1
+#define DWC3_REQUEST_STATUS_CANCELLED 2
+#define DWC3_REQUEST_STATUS_COMPLETED 3
+#define DWC3_REQUEST_STATUS_UNKNOWN -1
+
u8 epnum;
struct dwc3_trb *trb;
dma_addr_t trb_dma;
@@ -892,7 +899,6 @@ struct dwc3_request {
unsigned needs_extra_trb:1;
unsigned direction:1;
unsigned mapped:1;
- unsigned started:1;
};
/*
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 4f75ab3505b77a1871cd25e4a92907dc9cbcc075..6759a7efd8d508b004e123e412eebbac154b9384 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -193,65 +193,69 @@ static inline const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
* dwc3_gadget_event_string - returns event name
* @event: the event code
*/
-static inline const char *
-dwc3_gadget_event_string(char *str, const struct dwc3_event_devt *event)
+static inline const char *dwc3_gadget_event_string(char *str, size_t size,
+ const struct dwc3_event_devt *event)
{
enum dwc3_link_state state = event->event_info & DWC3_LINK_STATE_MASK;
switch (event->type) {
case DWC3_DEVICE_EVENT_DISCONNECT:
- sprintf(str, "Disconnect: [%s]",
+ snprintf(str, size, "Disconnect: [%s]",
dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_RESET:
- sprintf(str, "Reset [%s]", dwc3_gadget_link_string(state));
+ snprintf(str, size, "Reset [%s]",
+ dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_CONNECT_DONE:
- sprintf(str, "Connection Done [%s]",
+ snprintf(str, size, "Connection Done [%s]",
dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
- sprintf(str, "Link Change [%s]",
+ snprintf(str, size, "Link Change [%s]",
dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_WAKEUP:
- sprintf(str, "WakeUp [%s]", dwc3_gadget_link_string(state));
+ snprintf(str, size, "WakeUp [%s]",
+ dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_EOPF:
- sprintf(str, "End-Of-Frame [%s]",
+ snprintf(str, size, "End-Of-Frame [%s]",
dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_SOF:
- sprintf(str, "Start-Of-Frame [%s]",
+ snprintf(str, size, "Start-Of-Frame [%s]",
dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
- sprintf(str, "Erratic Error [%s]",
+ snprintf(str, size, "Erratic Error [%s]",
dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_CMD_CMPL:
- sprintf(str, "Command Complete [%s]",
+ snprintf(str, size, "Command Complete [%s]",
dwc3_gadget_link_string(state));
break;
case DWC3_DEVICE_EVENT_OVERFLOW:
- sprintf(str, "Overflow [%s]", dwc3_gadget_link_string(state));
+ snprintf(str, size, "Overflow [%s]",
+ dwc3_gadget_link_string(state));
break;
default:
- sprintf(str, "UNKNOWN");
+ snprintf(str, size, "UNKNOWN");
}
return str;
}
-static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str)
+static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str,
+ size_t size)
{
switch (t & USB_RECIP_MASK) {
case USB_RECIP_INTERFACE:
- sprintf(str, "Get Interface Status(Intf = %d, Length = %d)",
- i, l);
+ snprintf(str, size, "Get Interface Status(Intf = %d, Length = %d)",
+ i, l);
break;
case USB_RECIP_ENDPOINT:
- sprintf(str, "Get Endpoint Status(ep%d%s)",
+ snprintf(str, size, "Get Endpoint Status(ep%d%s)",
i & ~USB_DIR_IN,
i & USB_DIR_IN ? "in" : "out");
break;
@@ -259,11 +263,11 @@ static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str)
}
static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v,
- __u16 i, char *str)
+ __u16 i, char *str, size_t size)
{
switch (t & USB_RECIP_MASK) {
case USB_RECIP_DEVICE:
- sprintf(str, "%s Device Feature(%s%s)",
+ snprintf(str, size, "%s Device Feature(%s%s)",
b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
({char *s;
switch (v) {
@@ -311,13 +315,13 @@ static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v,
} s; }) : "");
break;
case USB_RECIP_INTERFACE:
- sprintf(str, "%s Interface Feature(%s)",
+ snprintf(str, size, "%s Interface Feature(%s)",
b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
v == USB_INTRF_FUNC_SUSPEND ?
"Function Suspend" : "UNKNOWN");
break;
case USB_RECIP_ENDPOINT:
- sprintf(str, "%s Endpoint Feature(%s ep%d%s)",
+ snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)",
b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
v == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN",
i & ~USB_DIR_IN,
@@ -326,15 +330,15 @@ static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v,
}
}
-static inline void dwc3_decode_set_address(__u16 v, char *str)
+static inline void dwc3_decode_set_address(__u16 v, char *str, size_t size)
{
- sprintf(str, "Set Address(Addr = %02x)", v);
+ snprintf(str, size, "Set Address(Addr = %02x)", v);
}
static inline void dwc3_decode_get_set_descriptor(__u8 t, __u8 b, __u16 v,
- __u16 i, __u16 l, char *str)
+ __u16 i, __u16 l, char *str, size_t size)
{
- sprintf(str, "%s %s Descriptor(Index = %d, Length = %d)",
+ snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)",
b == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set",
({ char *s;
switch (v >> 8) {
@@ -393,87 +397,92 @@ static inline void dwc3_decode_get_set_descriptor(__u8 t, __u8 b, __u16 v,
}
-static inline void dwc3_decode_get_configuration(__u16 l, char *str)
+static inline void dwc3_decode_get_configuration(__u16 l, char *str,
+ size_t size)
{
- sprintf(str, "Get Configuration(Length = %d)", l);
+ snprintf(str, size, "Get Configuration(Length = %d)", l);
}
-static inline void dwc3_decode_set_configuration(__u8 v, char *str)
+static inline void dwc3_decode_set_configuration(__u8 v, char *str, size_t size)
{
- sprintf(str, "Set Configuration(Config = %d)", v);
+ snprintf(str, size, "Set Configuration(Config = %d)", v);
}
-static inline void dwc3_decode_get_intf(__u16 i, __u16 l, char *str)
+static inline void dwc3_decode_get_intf(__u16 i, __u16 l, char *str,
+ size_t size)
{
- sprintf(str, "Get Interface(Intf = %d, Length = %d)", i, l);
+ snprintf(str, size, "Get Interface(Intf = %d, Length = %d)", i, l);
}
-static inline void dwc3_decode_set_intf(__u8 v, __u16 i, char *str)
+static inline void dwc3_decode_set_intf(__u8 v, __u16 i, char *str, size_t size)
{
- sprintf(str, "Set Interface(Intf = %d, Alt.Setting = %d)", i, v);
+ snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)", i, v);
}
-static inline void dwc3_decode_synch_frame(__u16 i, __u16 l, char *str)
+static inline void dwc3_decode_synch_frame(__u16 i, __u16 l, char *str,
+ size_t size)
{
- sprintf(str, "Synch Frame(Endpoint = %d, Length = %d)", i, l);
+ snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)", i, l);
}
-static inline void dwc3_decode_set_sel(__u16 l, char *str)
+static inline void dwc3_decode_set_sel(__u16 l, char *str, size_t size)
{
- sprintf(str, "Set SEL(Length = %d)", l);
+ snprintf(str, size, "Set SEL(Length = %d)", l);
}
-static inline void dwc3_decode_set_isoch_delay(__u8 v, char *str)
+static inline void dwc3_decode_set_isoch_delay(__u8 v, char *str, size_t size)
{
- sprintf(str, "Set Isochronous Delay(Delay = %d ns)", v);
+ snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", v);
}
/**
* dwc3_decode_ctrl - returns a string represetion of ctrl request
*/
-static inline const char *dwc3_decode_ctrl(char *str, __u8 bRequestType,
- __u8 bRequest, __u16 wValue, __u16 wIndex, __u16 wLength)
+static inline const char *dwc3_decode_ctrl(char *str, size_t size,
+ __u8 bRequestType, __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
{
switch (bRequest) {
case USB_REQ_GET_STATUS:
- dwc3_decode_get_status(bRequestType, wIndex, wLength, str);
+ dwc3_decode_get_status(bRequestType, wIndex, wLength, str,
+ size);
break;
case USB_REQ_CLEAR_FEATURE:
case USB_REQ_SET_FEATURE:
dwc3_decode_set_clear_feature(bRequestType, bRequest, wValue,
- wIndex, str);
+ wIndex, str, size);
break;
case USB_REQ_SET_ADDRESS:
- dwc3_decode_set_address(wValue, str);
+ dwc3_decode_set_address(wValue, str, size);
break;
case USB_REQ_GET_DESCRIPTOR:
case USB_REQ_SET_DESCRIPTOR:
dwc3_decode_get_set_descriptor(bRequestType, bRequest, wValue,
- wIndex, wLength, str);
+ wIndex, wLength, str, size);
break;
case USB_REQ_GET_CONFIGURATION:
- dwc3_decode_get_configuration(wLength, str);
+ dwc3_decode_get_configuration(wLength, str, size);
break;
case USB_REQ_SET_CONFIGURATION:
- dwc3_decode_set_configuration(wValue, str);
+ dwc3_decode_set_configuration(wValue, str, size);
break;
case USB_REQ_GET_INTERFACE:
- dwc3_decode_get_intf(wIndex, wLength, str);
+ dwc3_decode_get_intf(wIndex, wLength, str, size);
break;
case USB_REQ_SET_INTERFACE:
- dwc3_decode_set_intf(wValue, wIndex, str);
+ dwc3_decode_set_intf(wValue, wIndex, str, size);
break;
case USB_REQ_SYNCH_FRAME:
- dwc3_decode_synch_frame(wIndex, wLength, str);
+ dwc3_decode_synch_frame(wIndex, wLength, str, size);
break;
case USB_REQ_SET_SEL:
- dwc3_decode_set_sel(wLength, str);
+ dwc3_decode_set_sel(wLength, str, size);
break;
case USB_REQ_SET_ISOCH_DELAY:
- dwc3_decode_set_isoch_delay(wValue, str);
+ dwc3_decode_set_isoch_delay(wValue, str, size);
break;
default:
- sprintf(str, "%02x %02x %02x %02x %02x %02x %02x %02x",
+ snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x",
bRequestType, bRequest,
cpu_to_le16(wValue) & 0xff,
cpu_to_le16(wValue) >> 8,
@@ -490,16 +499,15 @@ static inline const char *dwc3_decode_ctrl(char *str, __u8 bRequestType,
* dwc3_ep_event_string - returns event name
* @event: then event code
*/
-static inline const char *
-dwc3_ep_event_string(char *str, const struct dwc3_event_depevt *event,
- u32 ep0state)
+static inline const char *dwc3_ep_event_string(char *str, size_t size,
+ const struct dwc3_event_depevt *event, u32 ep0state)
{
u8 epnum = event->endpoint_number;
size_t len;
int status;
int ret;
- ret = sprintf(str, "ep%d%s: ", epnum >> 1,
+ ret = snprintf(str, size, "ep%d%s: ", epnum >> 1,
(epnum & 1) ? "in" : "out");
if (ret < 0)
return "UNKNOWN";
@@ -509,7 +517,7 @@ dwc3_ep_event_string(char *str, const struct dwc3_event_depevt *event,
switch (event->endpoint_event) {
case DWC3_DEPEVT_XFERCOMPLETE:
len = strlen(str);
- sprintf(str + len, "Transfer Complete (%c%c%c)",
+ snprintf(str + len, size - len, "Transfer Complete (%c%c%c)",
status & DEPEVT_STATUS_SHORT ? 'S' : 's',
status & DEPEVT_STATUS_IOC ? 'I' : 'i',
status & DEPEVT_STATUS_LST ? 'L' : 'l');
@@ -517,12 +525,13 @@ dwc3_ep_event_string(char *str, const struct dwc3_event_depevt *event,
len = strlen(str);
if (epnum <= 1)
- sprintf(str + len, " [%s]", dwc3_ep0_state_string(ep0state));
+ snprintf(str + len, size - len, " [%s]",
+ dwc3_ep0_state_string(ep0state));
break;
case DWC3_DEPEVT_XFERINPROGRESS:
len = strlen(str);
- sprintf(str + len, "Transfer In Progress [%d] (%c%c%c)",
+ snprintf(str + len, size - len, "Transfer In Progress [%d] (%c%c%c)",
event->parameters,
status & DEPEVT_STATUS_SHORT ? 'S' : 's',
status & DEPEVT_STATUS_IOC ? 'I' : 'i',
@@ -531,47 +540,51 @@ dwc3_ep_event_string(char *str, const struct dwc3_event_depevt *event,
case DWC3_DEPEVT_XFERNOTREADY:
len = strlen(str);
- sprintf(str + len, "Transfer Not Ready [%d]%s",
+ snprintf(str + len, size - len, "Transfer Not Ready [%d]%s",
event->parameters,
status & DEPEVT_STATUS_TRANSFER_ACTIVE ?
" (Active)" : " (Not Active)");
+ len = strlen(str);
+
/* Control Endpoints */
if (epnum <= 1) {
int phase = DEPEVT_STATUS_CONTROL_PHASE(event->status);
switch (phase) {
case DEPEVT_STATUS_CONTROL_DATA:
- strcat(str, " [Data Phase]");
+ snprintf(str + ret, size - ret,
+ " [Data Phase]");
break;
case DEPEVT_STATUS_CONTROL_STATUS:
- strcat(str, " [Status Phase]");
+ snprintf(str + ret, size - ret,
+ " [Status Phase]");
}
}
break;
case DWC3_DEPEVT_RXTXFIFOEVT:
- strcat(str, "FIFO");
+ snprintf(str + ret, size - ret, "FIFO");
break;
case DWC3_DEPEVT_STREAMEVT:
status = event->status;
switch (status) {
case DEPEVT_STREAMEVT_FOUND:
- sprintf(str + ret, " Stream %d Found",
+ snprintf(str + ret, size - ret, " Stream %d Found",
event->parameters);
break;
case DEPEVT_STREAMEVT_NOTFOUND:
default:
- strcat(str, " Stream Not Found");
+ snprintf(str + ret, size - ret, " Stream Not Found");
break;
}
break;
case DWC3_DEPEVT_EPCMDCMPLT:
- strcat(str, "Endpoint Command Complete");
+ snprintf(str + ret, size - ret, "Endpoint Command Complete");
break;
default:
- sprintf(str, "UNKNOWN");
+ snprintf(str, size, "UNKNOWN");
}
return str;
@@ -611,14 +624,15 @@ static inline const char *dwc3_gadget_event_type_string(u8 event)
}
}
-static inline const char *dwc3_decode_event(char *str, u32 event, u32 ep0state)
+static inline const char *dwc3_decode_event(char *str, size_t size, u32 event,
+ u32 ep0state)
{
const union dwc3_event evt = (union dwc3_event) event;
if (evt.type.is_devspec)
- return dwc3_gadget_event_string(str, &evt.devt);
+ return dwc3_gadget_event_string(str, size, &evt.devt);
else
- return dwc3_ep_event_string(str, &evt.depevt, ep0state);
+ return dwc3_ep_event_string(str, size, &evt.depevt, ep0state);
}
static inline const char *dwc3_ep_cmd_status_string(int status)
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 869725d15c7493126f8b0140e0dc28a92d95f529..726100d1ac0d8070e2b0dc2341c80886d1d3f814 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -457,8 +457,13 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
* This device property is for kernel internal use only and
* is expected to be set by the glue code.
*/
- if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
- return extcon_get_extcon_dev(name);
+ if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
+ edev = extcon_get_extcon_dev(name);
+ if (!edev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return edev;
+ }
np_phy = of_parse_phandle(dev->of_node, "phys", 0);
np_conn = of_graph_get_remote_node(np_phy, -1, -1);
diff --git a/drivers/usb/dwc3/dwc3-haps.c b/drivers/usb/dwc3/dwc3-haps.c
index 02d57d98ef9bd41190257a9d05ca028cb07c0fd1..3cecbf1694526eed989ccbd0b39d2988d2697564 100644
--- a/drivers/usb/dwc3/dwc3-haps.c
+++ b/drivers/usb/dwc3/dwc3-haps.c
@@ -106,6 +106,15 @@ static const struct pci_device_id dwc3_haps_id_table[] = {
{
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
+ /*
+ * i.MX6QP and i.MX7D platform use a PCIe controller with the
+ * same VID and PID as this USB controller. The system may
+ * incorrectly match this driver to that PCIe controller. To
+ * workaround this, specifically use class type USB to prevent
+ * incorrect driver matching.
+ */
+ .class = (PCI_CLASS_SERIAL_USB << 8),
+ .class_mask = 0xffff00,
},
{
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index 193a9a88222afdbc2ad210b0ddbc96a4a87f39aa..cbee5fb9b9fb02d2e40e795d6e4276f0cdeaba6d 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -106,6 +106,10 @@ static int kdwc3_probe(struct platform_device *pdev)
goto err_irq;
}
+ /* IRQ processing not required currently for AM65 */
+ if (of_device_is_compatible(node, "ti,am654-dwc3"))
+ goto skip_irq;
+
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "missing irq\n");
@@ -123,6 +127,7 @@ static int kdwc3_probe(struct platform_device *pdev)
kdwc3_enable_irqs(kdwc);
+skip_irq:
error = of_platform_populate(node, NULL, NULL, dev);
if (error) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
@@ -152,8 +157,11 @@ static int kdwc3_remove_core(struct device *dev, void *c)
static int kdwc3_remove(struct platform_device *pdev)
{
struct dwc3_keystone *kdwc = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+
+ if (!of_device_is_compatible(node, "ti,am654-dwc3"))
+ kdwc3_disable_irqs(kdwc);
- kdwc3_disable_irqs(kdwc);
device_for_each_child(&pdev->dev, NULL, kdwc3_remove_core);
pm_runtime_put_sync(kdwc->dev);
pm_runtime_disable(kdwc->dev);
@@ -165,6 +173,7 @@ static int kdwc3_remove(struct platform_device *pdev)
static const struct of_device_id kdwc3_of_match[] = {
{ .compatible = "ti,keystone-dwc3", },
+ { .compatible = "ti,am654-dwc3" },
{},
};
MODULE_DEVICE_TABLE(of, kdwc3_of_match);
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index a6d0203e40b6e048bfb736133321ef6c857c09ca..184df4daa590ad1329ac4871d8943563397697ee 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -595,6 +595,7 @@ static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
static const struct of_device_id dwc3_qcom_of_match[] = {
{ .compatible = "qcom,dwc3" },
{ .compatible = "qcom,msm8996-dwc3" },
+ { .compatible = "qcom,msm8998-dwc3" },
{ .compatible = "qcom,sdm845-dwc3" },
{ }
};
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 6c9b76bcc2e173570b7fdae29769d4925b3c971d..e293400cc6e95c242c4baedff3d92f68cefdce5a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -174,7 +174,6 @@ static void dwc3_gadget_del_and_unmap_request(struct dwc3_ep *dep,
{
struct dwc3 *dwc = dep->dwc;
- req->started = false;
list_del(&req->list);
req->remaining = 0;
req->needs_extra_trb = false;
@@ -209,6 +208,7 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
struct dwc3 *dwc = dep->dwc;
dwc3_gadget_del_and_unmap_request(dep, req, status);
+ req->status = DWC3_REQUEST_STATUS_COMPLETED;
spin_unlock(&dwc->lock);
usb_gadget_giveback_request(&dep->endpoint, &req->request);
@@ -384,19 +384,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
trace_dwc3_gadget_ep_cmd(dep, cmd, params, cmd_status);
- if (ret == 0) {
- switch (DWC3_DEPCMD_CMD(cmd)) {
- case DWC3_DEPCMD_STARTTRANSFER:
- dep->flags |= DWC3_EP_TRANSFER_STARTED;
- dwc3_gadget_ep_get_transfer_index(dep);
- break;
- case DWC3_DEPCMD_ENDTRANSFER:
- dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
- break;
- default:
- /* nothing */
- break;
- }
+ if (ret == 0 && DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) {
+ dep->flags |= DWC3_EP_TRANSFER_STARTED;
+ dwc3_gadget_ep_get_transfer_index(dep);
}
if (saved_config) {
@@ -642,7 +632,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
dep->type = usb_endpoint_type(desc);
dep->flags |= DWC3_EP_ENABLED;
- dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
reg |= DWC3_DALEPENA_EP(dep->number);
@@ -698,12 +687,13 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
return 0;
}
-static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force);
+static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
+ bool interrupt);
static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_request *req;
- dwc3_stop_active_transfer(dep, true);
+ dwc3_stop_active_transfer(dep, true, false);
/* - giveback all requests to gadget driver */
while (!list_empty(&dep->started_list)) {
@@ -748,7 +738,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
dep->stream_capable = false;
dep->type = 0;
- dep->flags &= DWC3_EP_END_TRANSFER_PENDING;
+ dep->flags = 0;
/* Clear out the ep descriptors for non-ep0 */
if (dep->number > 1) {
@@ -847,6 +837,7 @@ static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
req->direction = dep->direction;
req->epnum = dep->number;
req->dep = dep;
+ req->status = DWC3_REQUEST_STATUS_UNKNOWN;
trace_dwc3_alloc_request(req);
@@ -1360,7 +1351,7 @@ static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep)
* to wait for the next XferNotReady to test the command again
*/
if (cmd_status == 0) {
- dwc3_stop_active_transfer(dep, true);
+ dwc3_stop_active_transfer(dep, true, true);
return 0;
}
}
@@ -1435,6 +1426,11 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
&req->request, req->dep->name))
return -EINVAL;
+ if (WARN(req->status < DWC3_REQUEST_STATUS_COMPLETED,
+ "%s: request %pK already in flight\n",
+ dep->name, &req->request))
+ return -EINVAL;
+
pm_runtime_get(dwc->dev);
req->request.actual = 0;
@@ -1443,6 +1439,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
trace_dwc3_ep_queue(req);
list_add_tail(&req->list, &dep->pending_list);
+ req->status = DWC3_REQUEST_STATUS_QUEUED;
/*
* NOTICE: Isochronous endpoints should NEVER be prestarted. We must
@@ -1506,6 +1503,8 @@ static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *r
trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
dwc3_ep_inc_deq(dep);
}
+
+ req->num_trbs = 0;
}
static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
@@ -1547,13 +1546,16 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
}
if (r == req) {
/* wait until it is processed */
- dwc3_stop_active_transfer(dep, true);
+ dwc3_stop_active_transfer(dep, true, true);
if (!r->trb)
goto out0;
dwc3_gadget_move_cancelled_request(req);
- goto out0;
+ if (dep->flags & DWC3_EP_TRANSFER_STARTED)
+ goto out0;
+ else
+ goto out1;
}
dev_err(dwc->dev, "request %pK was not queued to %s\n",
request, ep->name);
@@ -1561,6 +1563,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
goto out0;
}
+out1:
dwc3_gadget_giveback(dep, req, -ECONNRESET);
out0:
@@ -2500,7 +2503,7 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep,
dwc3_gadget_ep_cleanup_completed_requests(dep, event, status);
if (stop) {
- dwc3_stop_active_transfer(dep, true);
+ dwc3_stop_active_transfer(dep, true, true);
dep->flags = DWC3_EP_ENABLED;
}
@@ -2547,7 +2550,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
dep = dwc->eps[epnum];
if (!(dep->flags & DWC3_EP_ENABLED)) {
- if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+ if (!(dep->flags & DWC3_EP_TRANSFER_STARTED))
return;
/* Handle only EPCMDCMPLT when EP disabled */
@@ -2571,7 +2574,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
cmd = DEPEVT_PARAMETER_CMD(event->parameters);
if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
- dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
+ dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
dwc3_gadget_ep_cleanup_cancelled_requests(dep);
}
break;
@@ -2621,15 +2624,15 @@ static void dwc3_reset_gadget(struct dwc3 *dwc)
}
}
-static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force)
+static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
+ bool interrupt)
{
struct dwc3 *dwc = dep->dwc;
struct dwc3_gadget_ep_cmd_params params;
u32 cmd;
int ret;
- if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) ||
- !dep->resource_index)
+ if (!(dep->flags & DWC3_EP_TRANSFER_STARTED))
return;
/*
@@ -2665,17 +2668,15 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force)
cmd = DWC3_DEPCMD_ENDTRANSFER;
cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
- cmd |= DWC3_DEPCMD_CMDIOC;
+ cmd |= interrupt ? DWC3_DEPCMD_CMDIOC : 0;
cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
memset(¶ms, 0, sizeof(params));
ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
WARN_ON_ONCE(ret);
dep->resource_index = 0;
- if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) {
- dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
+ if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A)
udelay(100);
- }
}
static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
@@ -3339,6 +3340,8 @@ int dwc3_gadget_init(struct dwc3 *dwc)
goto err4;
}
+ dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
+
return 0;
err4:
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 023a473648eb77ddc36c5921a8a339a4d5c49817..3ed738e86ea75be6ec43ab1fd828a70024c9264c 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -75,7 +75,7 @@ static inline void dwc3_gadget_move_started_request(struct dwc3_request *req)
{
struct dwc3_ep *dep = req->dep;
- req->started = true;
+ req->status = DWC3_REQUEST_STATUS_STARTED;
list_move_tail(&req->list, &dep->started_list);
}
@@ -90,7 +90,7 @@ static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req)
{
struct dwc3_ep *dep = req->dep;
- req->started = false;
+ req->status = DWC3_REQUEST_STATUS_CANCELLED;
list_move_tail(&req->list, &dep->cancelled_list);
}
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
index e97a00593dda79c8dd7c4849c5ee459b2225311d..818a63da1a449b9d3b1a95938fea997e456fd276 100644
--- a/drivers/usb/dwc3/trace.h
+++ b/drivers/usb/dwc3/trace.h
@@ -59,8 +59,8 @@ DECLARE_EVENT_CLASS(dwc3_log_event,
__entry->ep0state = dwc->ep0state;
),
TP_printk("event (%08x): %s", __entry->event,
- dwc3_decode_event(__get_str(str), __entry->event,
- __entry->ep0state))
+ dwc3_decode_event(__get_str(str), DWC3_MSG_MAX,
+ __entry->event, __entry->ep0state))
);
DEFINE_EVENT(dwc3_log_event, dwc3_event,
@@ -86,7 +86,8 @@ DECLARE_EVENT_CLASS(dwc3_log_ctrl,
__entry->wIndex = le16_to_cpu(ctrl->wIndex);
__entry->wLength = le16_to_cpu(ctrl->wLength);
),
- TP_printk("%s", dwc3_decode_ctrl(__get_str(str), __entry->bRequestType,
+ TP_printk("%s", dwc3_decode_ctrl(__get_str(str), DWC3_MSG_MAX,
+ __entry->bRequestType,
__entry->bRequest, __entry->wValue,
__entry->wIndex, __entry->wLength)
)
@@ -305,7 +306,7 @@ DECLARE_EVENT_CLASS(dwc3_log_ep,
__entry->trb_enqueue = dep->trb_enqueue;
__entry->trb_dequeue = dep->trb_dequeue;
),
- TP_printk("%s: mps %d/%d streams %d burst %d ring %d/%d flags %c:%c%c%c%c:%c:%c",
+ TP_printk("%s: mps %d/%d streams %d burst %d ring %d/%d flags %c:%c%c%c%c:%c",
__get_str(name), __entry->maxpacket,
__entry->maxpacket_limit, __entry->max_streams,
__entry->maxburst, __entry->trb_enqueue,
@@ -315,7 +316,6 @@ DECLARE_EVENT_CLASS(dwc3_log_ep,
__entry->flags & DWC3_EP_WEDGE ? 'W' : 'w',
__entry->flags & DWC3_EP_TRANSFER_STARTED ? 'B' : 'b',
__entry->flags & DWC3_EP_PENDING_REQUEST ? 'P' : 'p',
- __entry->flags & DWC3_EP_END_TRANSFER_PENDING ? 'E' : 'e',
__entry->direction ? '<' : '>'
)
);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 31cce7805eb2e93706468409a39f287fdebd5f5a..ec189d7855a0cb68d2ba5715efe94fa6f0c7e086 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Gadget support on a system involves
# (a) a peripheral controller, and
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 71b15c65b90f994fc1fbc4f548e232e09c308f69..1eb4fa2e623f0a68db5f1491149f836c13df63d8 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -67,9 +67,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
)
{
struct usb_ep *ep;
- u8 type;
-
- type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
if (gadget->ops->match_ep) {
ep = gadget->ops->match_ep(gadget, desc, ep_comp);
@@ -109,16 +106,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
desc->bEndpointAddress |= gadget->out_epnum;
}
- /* report (variable) full speed bulk maxpacket */
- if ((type == USB_ENDPOINT_XFER_BULK) && !ep_comp) {
- int size = ep->maxpacket_limit;
-
- /* min() doesn't work on bitfields with gcc-3.5 */
- if (size > 64)
- size = 64;
- desc->wMaxPacketSize = cpu_to_le16(size);
- }
-
ep->address = desc->bEndpointAddress;
ep->desc = NULL;
ep->comp_desc = NULL;
@@ -152,9 +139,10 @@ EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
*
* On success, this returns an claimed usb_ep, and modifies the endpoint
* descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value
- * is initialized as if the endpoint were used at full speed. To prevent
- * the endpoint from being returned by a later autoconfig call, claims it
- * by assigning ep->claimed to true.
+ * is initialized as if the endpoint were used at full speed. Because of
+ * that the users must consider adjusting the autoconfigured descriptor.
+ * To prevent the endpoint from being returned by a later autoconfig call,
+ * claims it by assigning ep->claimed to true.
*
* On failure, this returns a null endpoint descriptor.
*/
@@ -163,7 +151,26 @@ struct usb_ep *usb_ep_autoconfig(
struct usb_endpoint_descriptor *desc
)
{
- return usb_ep_autoconfig_ss(gadget, desc, NULL);
+ struct usb_ep *ep;
+ u8 type;
+
+ ep = usb_ep_autoconfig_ss(gadget, desc, NULL);
+ if (!ep)
+ return NULL;
+
+ type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ /* report (variable) full speed bulk maxpacket */
+ if (type == USB_ENDPOINT_XFER_BULK) {
+ int size = ep->maxpacket_limit;
+
+ /* min() doesn't work on bitfields with gcc-3.5 */
+ if (size > 64)
+ size = 64;
+ desc->wMaxPacketSize = cpu_to_le16(size);
+ }
+
+ return ep;
}
EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 1e543043870323f90533122d4d011fb6f30f5f28..20413c276c616c5e387a66d02fcb7b3beffade72 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1082,6 +1082,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
* condition with req->complete callback.
*/
usb_ep_dequeue(ep->ep, req);
+ wait_for_completion(&done);
interrupted = ep->status < 0;
}
@@ -2843,12 +2844,18 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
struct usb_request *req;
struct usb_ep *ep;
u8 bEndpointAddress;
+ u16 wMaxPacketSize;
/*
* We back up bEndpointAddress because autoconfig overwrites
* it with physical endpoint address.
*/
bEndpointAddress = ds->bEndpointAddress;
+ /*
+ * We back up wMaxPacketSize because autoconfig treats
+ * endpoint descriptors as if they were full speed.
+ */
+ wMaxPacketSize = ds->wMaxPacketSize;
pr_vdebug("autoconfig\n");
ep = usb_ep_autoconfig(func->gadget, ds);
if (unlikely(!ep))
@@ -2869,6 +2876,11 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
*/
if (func->ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR)
ds->bEndpointAddress = bEndpointAddress;
+ /*
+ * Restore wMaxPacketSize which was potentially
+ * overwritten by autoconfig.
+ */
+ ds->wMaxPacketSize = wMaxPacketSize;
}
ffs_dump_mem(": Rewritten ep desc", ds, ds->bLength);
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index 2746a926a8d9768253bf5dc2b8a4d2f00e42b60d..00d346965f7a553fa0120b599c12ad8db1776da9 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -459,10 +459,10 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
} else if (intf == uac1->as_in_intf) {
uac1->as_in_alt = alt;
- if (alt)
- ret = u_audio_start_playback(&uac1->g_audio);
- else
- u_audio_stop_playback(&uac1->g_audio);
+ if (alt)
+ ret = u_audio_start_playback(&uac1->g_audio);
+ else
+ u_audio_stop_playback(&uac1->g_audio);
} else {
dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
return -EINVAL;
@@ -568,6 +568,7 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f)
goto fail;
as_out_interface_alt_0_desc.bInterfaceNumber = status;
as_out_interface_alt_1_desc.bInterfaceNumber = status;
+ ac_header_desc.baInterfaceNr[0] = status;
uac1->as_out_intf = status;
uac1->as_out_alt = 0;
@@ -576,6 +577,7 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f)
goto fail;
as_in_interface_alt_0_desc.bInterfaceNumber = status;
as_in_interface_alt_1_desc.bInterfaceNumber = status;
+ ac_header_desc.baInterfaceNr[1] = status;
uac1->as_in_intf = status;
uac1->as_in_alt = 0;
diff --git a/drivers/usb/gadget/function/u_ecm.h b/drivers/usb/gadget/function/u_ecm.h
index 050aa672ee7f8e0bf263ff723d164689eb7ed876..098ece573a5edb860ad8e8e96a820c1bd0f00f06 100644
--- a/drivers/usb/gadget/function/u_ecm.h
+++ b/drivers/usb/gadget/function/u_ecm.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_ECM_H
diff --git a/drivers/usb/gadget/function/u_eem.h b/drivers/usb/gadget/function/u_eem.h
index de3828d3e8f062a1bd5064ba957ad8088a3262f4..921386a375cfc08ca8011a43e0ba65cbd181a3b5 100644
--- a/drivers/usb/gadget/function/u_eem.h
+++ b/drivers/usb/gadget/function/u_eem.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_EEM_H
diff --git a/drivers/usb/gadget/function/u_ether_configfs.h b/drivers/usb/gadget/function/u_ether_configfs.h
index cd33cee4d78b699ac59c0c8d21a8d823e4a6fc21..d8b92485b727ed1431c1d3e6ff8153afb2bfc181 100644
--- a/drivers/usb/gadget/function/u_ether_configfs.h
+++ b/drivers/usb/gadget/function/u_ether_configfs.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef __U_ETHER_CONFIGFS_H
diff --git a/drivers/usb/gadget/function/u_fs.h b/drivers/usb/gadget/function/u_fs.h
index c3aba4dfa9584c9b3ce60b9b21af0db5fbc93b2d..f9b0cf67360d4618f23bea0da241ff9c574f4bf5 100644
--- a/drivers/usb/gadget/function/u_fs.h
+++ b/drivers/usb/gadget/function/u_fs.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_FFS_H
diff --git a/drivers/usb/gadget/function/u_gether.h b/drivers/usb/gadget/function/u_gether.h
index 5b7e2eb90336e8b3b3cf9e15c507edf7185c9208..ce4f07626f96253fe70e25ceb71680ee75ce81ec 100644
--- a/drivers/usb/gadget/function/u_gether.h
+++ b/drivers/usb/gadget/function/u_gether.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_GETHER_H
diff --git a/drivers/usb/gadget/function/u_hid.h b/drivers/usb/gadget/function/u_hid.h
index 2f5ca4bfa7ff11bd9bba3d150f7652c175140232..1594bfa312ebfc7e9b890498e068f3d98bbe7f8c 100644
--- a/drivers/usb/gadget/function/u_hid.h
+++ b/drivers/usb/gadget/function/u_hid.h
@@ -7,7 +7,7 @@
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_HID_H
diff --git a/drivers/usb/gadget/function/u_midi.h b/drivers/usb/gadget/function/u_midi.h
index 5599aa5fc977ff46a8dfb1fecceff3cc8c7b4dfb..29bf006c0a13e5b2b1d68d5d128b3b66f5e7244f 100644
--- a/drivers/usb/gadget/function/u_midi.h
+++ b/drivers/usb/gadget/function/u_midi.h
@@ -7,7 +7,7 @@
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_MIDI_H
diff --git a/drivers/usb/gadget/function/u_ncm.h b/drivers/usb/gadget/function/u_ncm.h
index 67324f983343aeb898782b2bef75798e4a246c66..d483e45c0f77bc86644d267d5b2e6dc487afc5cb 100644
--- a/drivers/usb/gadget/function/u_ncm.h
+++ b/drivers/usb/gadget/function/u_ncm.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_NCM_H
diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h
index 6088ff7441943676e304b0771d57217254f17818..78797764f47833640be9a3b457d35c31323f16a4 100644
--- a/drivers/usb/gadget/function/u_printer.h
+++ b/drivers/usb/gadget/function/u_printer.h
@@ -7,7 +7,7 @@
* Copyright (c) 2015 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_PRINTER_H
diff --git a/drivers/usb/gadget/function/u_rndis.h b/drivers/usb/gadget/function/u_rndis.h
index d65fb4ebac3cd2d6cfde7b817ecd681ed06b7308..1e148b76f339301e2a1ac8fcbf5da055c0bd84e6 100644
--- a/drivers/usb/gadget/function/u_rndis.h
+++ b/drivers/usb/gadget/function/u_rndis.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_RNDIS_H
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 29436f75bbe06b5e94df5a063a1a5222c3b6509d..65f634ec7fc265f63631331df7144c6b266ba3bd 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/tty.h>
@@ -26,6 +25,7 @@
#include <linux/module.h>
#include <linux/console.h>
#include <linux/kthread.h>
+#include <linux/workqueue.h>
#include <linux/kfifo.h>
#include "u_serial.h"
@@ -110,7 +110,7 @@ struct gs_port {
int read_allocated;
struct list_head read_queue;
unsigned n_read;
- struct tasklet_struct push;
+ struct delayed_work push;
struct list_head write_pool;
int write_started;
@@ -352,9 +352,10 @@ __acquires(&port->port_lock)
* So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
* can be buffered before the TTY layer's buffers (currently 64 KB).
*/
-static void gs_rx_push(unsigned long _port)
+static void gs_rx_push(struct work_struct *work)
{
- struct gs_port *port = (void *)_port;
+ struct delayed_work *w = to_delayed_work(work);
+ struct gs_port *port = container_of(w, struct gs_port, push);
struct tty_struct *tty;
struct list_head *queue = &port->read_queue;
bool disconnect = false;
@@ -429,21 +430,13 @@ static void gs_rx_push(unsigned long _port)
/* We want our data queue to become empty ASAP, keeping data
* in the tty and ldisc (not here). If we couldn't push any
- * this time around, there may be trouble unless there's an
- * implicit tty_unthrottle() call on its way...
+ * this time around, RX may be starved, so wait until next jiffy.
*
- * REVISIT we should probably add a timer to keep the tasklet
- * from starving ... but it's not clear that case ever happens.
+ * We may leave non-empty queue only when there is a tty, and
+ * either it is throttled or there is no more room in flip buffer.
*/
- if (!list_empty(queue) && tty) {
- if (!tty_throttled(tty)) {
- if (do_push)
- tasklet_schedule(&port->push);
- else
- pr_warn("ttyGS%d: RX not scheduled?\n",
- port->port_num);
- }
- }
+ if (!list_empty(queue) && !tty_throttled(tty))
+ schedule_delayed_work(&port->push, 1);
/* If we're still connected, refill the USB RX queue. */
if (!disconnect && port->port_usb)
@@ -459,7 +452,7 @@ static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
/* Queue all received data until the tty layer is ready for it. */
spin_lock(&port->port_lock);
list_add_tail(&req->list, &port->read_queue);
- tasklet_schedule(&port->push);
+ schedule_delayed_work(&port->push, 0);
spin_unlock(&port->port_lock);
}
@@ -854,8 +847,8 @@ static void gs_unthrottle(struct tty_struct *tty)
* rts/cts, or other handshaking with the host, but if the
* read queue backs up enough we'll be NAKing OUT packets.
*/
- tasklet_schedule(&port->push);
pr_vdebug("ttyGS%d: unthrottle\n", port->port_num);
+ schedule_delayed_work(&port->push, 0);
}
spin_unlock_irqrestore(&port->port_lock, flags);
}
@@ -1159,7 +1152,7 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
init_waitqueue_head(&port->drain_wait);
init_waitqueue_head(&port->close_wait);
- tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
+ INIT_DELAYED_WORK(&port->push, gs_rx_push);
INIT_LIST_HEAD(&port->read_pool);
INIT_LIST_HEAD(&port->read_queue);
@@ -1186,7 +1179,7 @@ static int gs_closed(struct gs_port *port)
static void gserial_free_port(struct gs_port *port)
{
- tasklet_kill(&port->push);
+ cancel_delayed_work_sync(&port->push);
/* wait for old opens to finish */
wait_event(port->close_wait, gs_closed(port));
WARN_ON(port->port_usb != NULL);
diff --git a/drivers/usb/gadget/function/u_uac2.h b/drivers/usb/gadget/function/u_uac2.h
index 8362ee572e1e23a46031fbcd237a75f51587a7a7..82048791eb6eed6a1ad8909394ad7226f3028ac5 100644
--- a/drivers/usb/gadget/function/u_uac2.h
+++ b/drivers/usb/gadget/function/u_uac2.h
@@ -7,7 +7,7 @@
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_UAC2_H
diff --git a/drivers/usb/gadget/function/u_uvc.h b/drivers/usb/gadget/function/u_uvc.h
index 5242d489e20a0e1c7a3aec6a0aa35616dc9d62bd..16da49a2fcf24051c07eddaf8381fe0eb26bdb46 100644
--- a/drivers/usb/gadget/function/u_uvc.h
+++ b/drivers/usb/gadget/function/u_uvc.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013-2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef U_UVC_H
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
index 099d650082e59e3a8c3d7e77736e4037738564b3..1473d25ff17ad1afe243b37aeda0483beb4bd2cc 100644
--- a/drivers/usb/gadget/function/uvc.h
+++ b/drivers/usb/gadget/function/uvc.h
@@ -56,6 +56,8 @@ extern unsigned int uvc_gadget_trace_param;
dev_dbg(&(f)->config->cdev->gadget->dev, "%s: " fmt, (f)->name, ##args)
#define uvcg_info(f, fmt, args...) \
dev_info(&(f)->config->cdev->gadget->dev, "%s: " fmt, (f)->name, ##args)
+#define uvcg_warn(f, fmt, args...) \
+ dev_warn(&(f)->config->cdev->gadget->dev, "%s: " fmt, (f)->name, ##args)
#define uvcg_err(f, fmt, args...) \
dev_err(&(f)->config->cdev->gadget->dev, "%s: " fmt, (f)->name, ##args)
diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index bc1e2af566c347cde135bba74a52470f399430e4..00fb58e50a1554ec2e7a53e4d65a071553245b71 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -7,7 +7,7 @@
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#include <linux/sort.h>
@@ -1570,10 +1570,6 @@ uvcg_uncompressed_##cname##_store(struct config_item *item, \
if (ret) \
goto end; \
\
- if (num > 255) { \
- ret = -EINVAL; \
- goto end; \
- } \
u->desc.aname = num; \
ret = len; \
end: \
@@ -1767,10 +1763,6 @@ uvcg_mjpeg_##cname##_store(struct config_item *item, \
if (ret) \
goto end; \
\
- if (num > 255) { \
- ret = -EINVAL; \
- goto end; \
- } \
u->desc.aname = num; \
ret = len; \
end: \
diff --git a/drivers/usb/gadget/function/uvc_configfs.h b/drivers/usb/gadget/function/uvc_configfs.h
index 8549c0b27b9d1828eec28f83c29addd2140bd7da..341391dbc81f8cce5f641684a4bfc898edd279bf 100644
--- a/drivers/usb/gadget/function/uvc_configfs.h
+++ b/drivers/usb/gadget/function/uvc_configfs.h
@@ -7,7 +7,7 @@
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef UVC_CONFIGFS_H
#define UVC_CONFIGFS_H
diff --git a/drivers/usb/gadget/function/uvc_v4l2.h b/drivers/usb/gadget/function/uvc_v4l2.h
index a75e9c397446055ce73448f50307499861197b5b..452d71059b3f07587cf9fae919b1a4adbfd59485 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.h
+++ b/drivers/usb/gadget/function/uvc_v4l2.h
@@ -7,7 +7,7 @@
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef __UVC_V4L2_H__
diff --git a/drivers/usb/gadget/function/uvc_video.h b/drivers/usb/gadget/function/uvc_video.h
index 278dc52c760424b42b97ef06fc7f59c3cffc4a7d..dff12103f696997963c81352959e0f56a374cbc9 100644
--- a/drivers/usb/gadget/function/uvc_video.h
+++ b/drivers/usb/gadget/function/uvc_video.h
@@ -7,7 +7,7 @@
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef __UVC_VIDEO_H__
#define __UVC_VIDEO_H__
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index 784bf86dad4fcb0c8f9d10f2bd8652ee6a8d38d6..d7c9e4fca895313da35669723e84a67e3a22623b 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Gadget support on a system involves
# (a) a peripheral controller, and
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 37ca0e669bd85401c2337d75aa888ea5f9772d0d..249277d0e53f98952422a3fe59befbc738905fa5 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1218,27 +1218,27 @@ ep0_poll (struct file *fd, poll_table *wait)
if (dev->state <= STATE_DEV_OPENED)
return DEFAULT_POLLMASK;
- poll_wait(fd, &dev->wait, wait);
-
- spin_lock_irq (&dev->lock);
-
- /* report fd mode change before acting on it */
- if (dev->setup_abort) {
- dev->setup_abort = 0;
- mask = EPOLLHUP;
- goto out;
- }
-
- if (dev->state == STATE_DEV_SETUP) {
- if (dev->setup_in || dev->setup_can_stall)
- mask = EPOLLOUT;
- } else {
- if (dev->ev_next != 0)
- mask = EPOLLIN;
- }
+ poll_wait(fd, &dev->wait, wait);
+
+ spin_lock_irq(&dev->lock);
+
+ /* report fd mode change before acting on it */
+ if (dev->setup_abort) {
+ dev->setup_abort = 0;
+ mask = EPOLLHUP;
+ goto out;
+ }
+
+ if (dev->state == STATE_DEV_SETUP) {
+ if (dev->setup_in || dev->setup_can_stall)
+ mask = EPOLLOUT;
+ } else {
+ if (dev->ev_next != 0)
+ mask = EPOLLIN;
+ }
out:
- spin_unlock_irq(&dev->lock);
- return mask;
+ spin_unlock_irq(&dev->lock);
+ return mask;
}
static long dev_ioctl (struct file *fd, unsigned code, unsigned long value)
diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c
index dbaa46eee85322ea9102bd34ef7ec488ddc4663f..6aea1ecb399998e872df00d4e561222779231cbb 100644
--- a/drivers/usb/gadget/u_f.c
+++ b/drivers/usb/gadget/u_f.c
@@ -5,7 +5,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#include "u_f.h"
diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h
index 09f90447fed5d4a998ac650de2d32db9245fb412..eaa13fd3dc7f36bd4f3953817037ff3cb818f463 100644
--- a/drivers/usb/gadget/u_f.h
+++ b/drivers/usb/gadget/u_f.h
@@ -7,7 +7,7 @@
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef __U_F_H__
diff --git a/drivers/usb/gadget/u_os_desc.h b/drivers/usb/gadget/u_os_desc.h
index 8acd21779ac8d08e82463a44ca7fdc3c173c5b0c..5d7d35c8cc314e7277a7769f7babacd737c33f92 100644
--- a/drivers/usb/gadget/u_os_desc.h
+++ b/drivers/usb/gadget/u_os_desc.h
@@ -7,7 +7,7 @@
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
*/
#ifndef __U_OS_DESC_H__
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 0a16cbd4e528e61ad06291b793333c4359182090..ef0259a950babb9327e0f03648767627aebe6880 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Gadget support on a system involves
# (a) a peripheral controller, and
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 4a28e3fbeb0bc1a14a515469b679297f1aad87db..83340f4fdc6e1702f70735424d5e15d75c75d87f 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -120,7 +120,7 @@ static void ast_vhub_epn_handle_ack(struct ast_vhub_ep *ep)
/* No current DMA ongoing */
req->active = false;
- /* Grab lenght out of HW */
+ /* Grab length out of HW */
len = VHUB_EP_DMA_TX_SIZE(stat);
/* If not using DMA, copy data out if needed */
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
index 35ba0e55a2e94af0b9c39d96990c1e5d3ecfa6b8..7c040f56100e4491891405382869a5ed93177007 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -295,7 +295,7 @@ static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
dsize = AST_VHUB_HUB_DESC_SIZE;
memcpy(ep->buf, &ast_vhub_hub_desc, dsize);
BUILD_BUG_ON(dsize > sizeof(ast_vhub_hub_desc));
- BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
+ BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
break;
default:
return std_req_stall;
diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig
index c74ac25dddcd0d0ce32fe457a228a50f54ace36b..3e88c7670b2ed40b019a2d3410236f07f2447079 100644
--- a/drivers/usb/gadget/udc/bdc/Kconfig
+++ b/drivers/usb/gadget/udc/bdc/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config USB_BDC_UDC
tristate "Broadcom USB3.0 device controller IP driver(BDC)"
depends on USB_GADGET && HAS_DMA
diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
index 6305bf2c8b59296abfceec90925654af1170b5b9..44c2a5eef7858f9eeb09d15a1671c2a86ccbc956 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_cmd.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
@@ -311,8 +311,8 @@ int bdc_ep_clear_stall(struct bdc *bdc, int epnum)
/* if the endpoint it not stallled */
if (!(ep->flags & BDC_EP_STALL)) {
ret = bdc_ep_set_stall(bdc, epnum);
- if (ret)
- return ret;
+ if (ret)
+ return ret;
}
}
/* Preserve the seq number for ep0 only */
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 87d6b12779f2e94129657f2047a9e030176e2825..7cf34beb50df7783470a883130a421111ff43d20 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -281,10 +281,10 @@ EXPORT_SYMBOL_GPL(usb_ep_queue);
* @ep:the endpoint associated with the request
* @req:the request being canceled
*
- * If the request is still active on the endpoint, it is dequeued and its
- * completion routine is called (with status -ECONNRESET); else a negative
- * error code is returned. This is guaranteed to happen before the call to
- * usb_ep_dequeue() returns.
+ * If the request is still active on the endpoint, it is dequeued and
+ * eventually its completion routine is called (with status -ECONNRESET);
+ * else a negative error code is returned. This routine is asynchronous,
+ * that is, it may return before the completion routine runs.
*
* Note that some hardware can't clear out write fifos (to unlink the request
* at the head of the queue) except as part of disconnecting from usb. Such
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index bc6abaea907d88db2555afdd9549d1486a96498f..cec49294bac64736cd6b90755292d1718b982b06 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -326,6 +326,7 @@ static void fotg210_wait_dma_done(struct fotg210_ep *ep)
static void fotg210_start_dma(struct fotg210_ep *ep,
struct fotg210_request *req)
{
+ struct device *dev = &ep->fotg210->gadget.dev;
dma_addr_t d;
u8 *buffer;
u32 length;
@@ -348,18 +349,14 @@ static void fotg210_start_dma(struct fotg210_ep *ep,
length = req->req.length;
}
- d = dma_map_single(NULL, buffer, length,
+ d = dma_map_single(dev, buffer, length,
ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
- if (dma_mapping_error(NULL, d)) {
+ if (dma_mapping_error(dev, d)) {
pr_err("dma_mapping_error\n");
return;
}
- dma_sync_single_for_device(NULL, d, length,
- ep->dir_in ? DMA_TO_DEVICE :
- DMA_FROM_DEVICE);
-
fotg210_enable_dma(ep, d, length);
/* check if dma is done */
@@ -370,7 +367,7 @@ static void fotg210_start_dma(struct fotg210_ep *ep,
/* update actual transfer length */
req->req.actual += length;
- dma_unmap_single(NULL, d, length, DMA_TO_DEVICE);
+ dma_unmap_single(dev, d, length, DMA_TO_DEVICE);
}
static void fotg210_ep0_queue(struct fotg210_ep *ep,
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index e7dae5379e0416a0d46270636904e3cfe892887d..f63f82450bf4e4960414eb80b3020fda6bfa8c3f 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -516,8 +516,8 @@ static int net2280_disable(struct usb_ep *_ep)
unsigned long flags;
ep = container_of(_ep, struct net2280_ep, ep);
- if (!_ep || !ep->desc || _ep->name == ep0name) {
- pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
+ if (!_ep || _ep->name == ep0name) {
+ pr_err("%s: Invalid ep=%p\n", __func__, _ep);
return -EINVAL;
}
spin_lock_irqsave(&ep->dev->lock, flags);
@@ -2279,7 +2279,7 @@ static void usb_reinit_338x(struct net2280 *dev)
* - It is safe to set for all connection speeds; all chip revisions.
* - R-M-W to leave other bits undisturbed.
* - Reference PLX TT-7372
- */
+ */
val = readl(&dev->ll_chicken_reg->ll_tsn_chicken_bit);
val |= BIT(RECOVERY_IDLE_TO_RECOVER_FMW);
writel(val, &dev->ll_chicken_reg->ll_tsn_chicken_bit);
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 6e34f959415972dc1cf3b04ccf2961d4dda75145..7dc248546fd4f95b5c80157baf1addecad40a35b 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2629,6 +2629,10 @@ static const struct of_device_id usb3_of_match[] = {
MODULE_DEVICE_TABLE(of, usb3_of_match);
static const struct soc_device_attribute renesas_usb3_quirks_match[] = {
+ {
+ .soc_id = "r8a774c0",
+ .data = &renesas_usb3_priv_r8a77990,
+ },
{
.soc_id = "r8a7795", .revision = "ES1.*",
.data = &renesas_usb3_priv_r8a7795_es1,
diff --git a/drivers/usb/gadget/udc/snps_udc_core.c b/drivers/usb/gadget/udc/snps_udc_core.c
index d4da47f4f6f4f8ddb33ae83a58e980b28346f1ac..3fcded31405a7652daacf452373d5360d6e3a229 100644
--- a/drivers/usb/gadget/udc/snps_udc_core.c
+++ b/drivers/usb/gadget/udc/snps_udc_core.c
@@ -947,15 +947,14 @@ static int prep_dma(struct udc_ep *ep, struct udc_request *req, gfp_t gfp)
UDC_DMA_STP_STS_BS_HOST_READY,
UDC_DMA_STP_STS_BS);
-
- /* clear NAK by writing CNAK */
- if (ep->naking) {
- tmp = readl(&ep->regs->ctl);
- tmp |= AMD_BIT(UDC_EPCTL_CNAK);
- writel(tmp, &ep->regs->ctl);
- ep->naking = 0;
- UDC_QUEUE_CNAK(ep, ep->num);
- }
+ /* clear NAK by writing CNAK */
+ if (ep->naking) {
+ tmp = readl(&ep->regs->ctl);
+ tmp |= AMD_BIT(UDC_EPCTL_CNAK);
+ writel(tmp, &ep->regs->ctl);
+ ep->naking = 0;
+ UDC_QUEUE_CNAK(ep, ep->num);
+ }
}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 16758b12a5e9b452cef913391516453282f82052..d809671c5fea79037e17f0f9820b7733162db5b2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Host Controller Drivers
#
@@ -69,13 +70,13 @@ config USB_XHCI_MTK
If unsure, say N.
config USB_XHCI_MVEBU
- tristate "xHCI support for Marvell Armada 375/38x"
+ tristate "xHCI support for Marvell Armada 375/38x/37xx"
select USB_XHCI_PLATFORM
depends on HAS_IOMEM
depends on ARCH_MVEBU || COMPILE_TEST
---help---
Say 'Y' to enable the support for the xHCI host controller
- found in Marvell Armada 375/38x ARM SOCs.
+ found in Marvell Armada 375/38x/37xx ARM SOCs.
config USB_XHCI_RCAR
tristate "xHCI support for Renesas R-Car SoCs"
@@ -179,8 +180,7 @@ config XPS_USB_HCD_XILINX
devices only.
config USB_EHCI_FSL
- tristate "Support for Freescale PPC on-chip EHCI USB controller"
- depends on FSL_SOC
+ tristate "Support for Freescale on-chip EHCI USB controller"
select USB_EHCI_ROOT_HUB_TT
---help---
Variation of ARC USB block used in some Freescale chips.
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 0a9fd2022acfa46d4ecb535b0e7303ef60375c6a..e3d0c1c251603315ad20c121dde0886d810a65ed 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
+#include <linux/io.h>
#include "ehci.h"
#include "ehci-fsl.h"
@@ -50,6 +51,7 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
struct resource *res;
int irq;
int retval;
+ u32 tmp;
pr_debug("initializing FSL-SOC USB Controller\n");
@@ -114,17 +116,22 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
}
/* Enable USB controller, 83xx or 8536 */
- if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
- clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK, 0x4);
-
+ if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) {
+ tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= 0x4;
+ iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
+ }
/*
* Enable UTMI phy and program PTS field in UTMI mode before asserting
* controller reset for USB Controller version 2.5
*/
if (pdata->has_fsl_erratum_a007792) {
- clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN);
+ tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= CTRL_UTMI_PHY_EN;
+ iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
+
writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
}
@@ -174,7 +181,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
enum fsl_usb2_phy_modes phy_mode,
unsigned int port_offset)
{
- u32 portsc;
+ u32 portsc, tmp;
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
void __iomem *non_ehci = hcd->regs;
struct device *dev = hcd->self.controller;
@@ -192,11 +199,16 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
case FSL_USB2_PHY_ULPI:
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
- clrbits32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
- clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK,
- ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
+ /* turn off UTMI PHY first */
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~(CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+
+ /* then turn on ULPI and enable USB controller */
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN;
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
}
portsc |= PORT_PTS_ULPI;
break;
@@ -210,16 +222,21 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
case FSL_USB2_PHY_UTMI_DUAL:
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
- clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN);
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= UTMI_PHY_EN;
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
become stable - 10ms*/
}
/* enable UTMI PHY */
- if (pdata->have_sysif_regs)
- clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK,
- CTRL_UTMI_PHY_EN);
+ if (pdata->have_sysif_regs) {
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= CTRL_UTMI_PHY_EN;
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+ }
portsc |= PORT_PTS_UTMI;
break;
case FSL_USB2_PHY_NONE:
@@ -241,9 +258,12 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
- if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
- clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN);
+ if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) {
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= USB_CTRL_USB_EN;
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+ }
return 0;
}
@@ -284,14 +304,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
return -EINVAL;
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
- unsigned int chip, rev, svr;
-
- svr = mfspr(SPRN_SVR);
- chip = svr >> 16;
- rev = (svr >> 4) & 0xf;
/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
- if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
+ if (pdata->has_fsl_erratum_14 == 1)
ehci->has_fsl_port_bug = 1;
if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 1ad72647a06917786a0331f896ead8b9597ab3ba..790acf3633e8912382e414c8e5ac343438e5b8f1 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -182,6 +182,23 @@ static int ehci_orion_drv_reset(struct usb_hcd *hcd)
return ret;
}
+static int __maybe_unused ehci_orion_drv_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+ return ehci_suspend(hcd, device_may_wakeup(dev));
+}
+
+static int __maybe_unused ehci_orion_drv_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+ return ehci_resume(hcd, false);
+}
+
+static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend,
+ ehci_orion_drv_resume);
+
static const struct ehci_driver_overrides orion_overrides __initconst = {
.extra_priv_size = sizeof(struct orion_ehci_hcd),
.reset = ehci_orion_drv_reset,
@@ -257,15 +274,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
if (IS_ERR(priv->phy)) {
err = PTR_ERR(priv->phy);
if (err != -ENOSYS)
- goto err_phy_get;
- } else {
- err = phy_init(priv->phy);
- if (err)
- goto err_phy_init;
-
- err = phy_power_on(priv->phy);
- if (err)
- goto err_phy_power_on;
+ goto err_dis_clk;
}
/*
@@ -297,19 +306,12 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
- goto err_add_hcd;
+ goto err_dis_clk;
device_wakeup_enable(hcd->self.controller);
return 0;
-err_add_hcd:
- if (!IS_ERR(priv->phy))
- phy_power_off(priv->phy);
-err_phy_power_on:
- if (!IS_ERR(priv->phy))
- phy_exit(priv->phy);
-err_phy_init:
-err_phy_get:
+err_dis_clk:
if (!IS_ERR(priv->clk))
clk_disable_unprepare(priv->clk);
usb_put_hcd(hcd);
@@ -327,11 +329,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
- if (!IS_ERR(priv->phy)) {
- phy_power_off(priv->phy);
- phy_exit(priv->phy);
- }
-
if (!IS_ERR(priv->clk))
clk_disable_unprepare(priv->clk);
@@ -354,6 +351,7 @@ static struct platform_driver ehci_orion_driver = {
.driver = {
.name = "orion-ehci",
.of_match_table = ehci_orion_dt_ids,
+ .pm = &ehci_orion_pm_ops,
},
};
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 677f9d5921097865ed6ab530535a336a7336cbcf..4f8b8a08c914697d5af832c76be52c40b838b996 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -225,6 +225,12 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
pdata->has_fsl_erratum_a005697 =
of_property_read_bool(np, "fsl,usb_erratum-a005697");
+ if (of_get_property(np, "fsl,usb_erratum_14", NULL))
+ pdata->has_fsl_erratum_14 = 1;
+ else
+ pdata->has_fsl_erratum_14 = 0;
+
+
/*
* Determine whether phy_clk_valid needs to be checked
* by reading property in device tree
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index ec6739ef3129e405f594f4486e739a31f5c657a9..fc35a7993b7b600690f9a3a8dbc7f6d59799ff8f 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -141,8 +141,11 @@ static struct regmap *at91_dt_syscon_sfr(void)
struct regmap *regmap;
regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
- if (IS_ERR(regmap))
- regmap = NULL;
+ if (IS_ERR(regmap)) {
+ regmap = syscon_regmap_lookup_by_compatible("microchip,sam9x60-sfr");
+ if (IS_ERR(regmap))
+ regmap = NULL;
+ }
return regmap;
}
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index c5e6e8d0b5ef5fe6428c7838df74e015262ddbe0..47c5515a9ce4aba55a1dc670a2e46f72f4e411e8 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -1323,7 +1323,7 @@ static struct list_head *qh_urb_transaction(struct oxu_hcd *oxu,
}
/* by default, enable interrupt on urb completion */
- qtd->hw_token |= cpu_to_le32(QTD_IOC);
+ qtd->hw_token |= cpu_to_le32(QTD_IOC);
return head;
cleanup:
@@ -2253,16 +2253,12 @@ static void scan_periodic(struct oxu_hcd *oxu)
for (;;) {
union ehci_shadow q, *q_p;
__le32 type, *hw_p;
- unsigned uframes;
/* don't scan past the live uframe */
frame = now_uframe >> 3;
- if (frame == (clock >> 3))
- uframes = now_uframe & 0x07;
- else {
+ if (frame != (clock >> 3)) {
/* safe to scan the whole frame at once */
now_uframe |= 0x07;
- uframes = 8;
}
restart:
@@ -2832,7 +2828,6 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
{
struct oxu_hcd *oxu = hcd_to_oxu(hcd);
int num, rem;
- int transfer_buffer_length;
void *transfer_buffer;
struct urb *murb;
int i, ret;
@@ -2843,7 +2838,6 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
/* Otherwise we should verify the USB transfer buffer size! */
transfer_buffer = urb->transfer_buffer;
- transfer_buffer_length = urb->transfer_buffer_length;
num = urb->transfer_buffer_length / 4096;
rem = urb->transfer_buffer_length % 4096;
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 5b8a3d9530c4a89bacb3850852c72d3a19c979dd..934584f0a20a7bee30adcee141c0a7eb63a51b3f 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2477,7 +2477,8 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
spin_unlock_irqrestore(&endp->queue_lock.slock,
irqs);
kfree(urbq);
- } urb->error_count = 0;
+ }
+ urb->error_count = 0;
usb_hcd_giveback_urb(hcd, urb, status);
return 0;
} else if (list_empty(&endp->urb_more)) {
@@ -2982,7 +2983,8 @@ static int u132_remove(struct platform_device *pdev)
while (rings-- > 0) {
struct u132_ring *ring = &u132->ring[rings];
u132_ring_cancel_work(u132, ring);
- } while (endps-- > 0) {
+ }
+ while (endps-- > 0) {
struct u132_endp *endp = u132->endp[endps];
if (endp)
u132_endp_cancel_work(u132, endp);
diff --git a/drivers/usb/host/whci/Kbuild b/drivers/usb/host/whci/Makefile
similarity index 79%
rename from drivers/usb/host/whci/Kbuild
rename to drivers/usb/host/whci/Makefile
index 26df0138079e5412d4f3d40a263595668903d3bb..859d20079df61aebc2b4ca60d5f3ba296d7f9ea0 100644
--- a/drivers/usb/host/whci/Kbuild
+++ b/drivers/usb/host/whci/Makefile
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o
whci-hcd-y := \
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 86cff5c28eff8a3b41512ddb42e18ffedf4e829b..c78be578abb065af0e0715352f8c502345907ad7 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -181,7 +181,7 @@ static void xhci_dbc_flush_endpoint_requests(struct dbc_ep *dep)
xhci_dbc_flush_single_request(req);
}
-static void xhci_dbc_flush_reqests(struct xhci_dbc *dbc)
+static void xhci_dbc_flush_requests(struct xhci_dbc *dbc)
{
xhci_dbc_flush_endpoint_requests(&dbc->eps[BULK_OUT]);
xhci_dbc_flush_endpoint_requests(&dbc->eps[BULK_IN]);
@@ -687,7 +687,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
!(portsc & DBC_PORTSC_CONN_STATUS)) {
xhci_info(xhci, "DbC cable unplugged\n");
dbc->state = DS_ENABLED;
- xhci_dbc_flush_reqests(dbc);
+ xhci_dbc_flush_requests(dbc);
return EVT_DISC;
}
@@ -697,7 +697,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
xhci_info(xhci, "DbC port reset\n");
writel(portsc, &dbc->regs->portsc);
dbc->state = DS_ENABLED;
- xhci_dbc_flush_reqests(dbc);
+ xhci_dbc_flush_requests(dbc);
return EVT_DISC;
}
diff --git a/drivers/usb/host/xhci-debugfs.h b/drivers/usb/host/xhci-debugfs.h
index ac5bc40f5c3afc867a0336c57c9782a219e015b1..f7a4e2492b00b10255197b509613a7df05299220 100644
--- a/drivers/usb/host/xhci-debugfs.h
+++ b/drivers/usb/host/xhci-debugfs.h
@@ -80,7 +80,6 @@ struct xhci_regset {
char name[DEBUGFS_NAMELEN];
struct debugfs_regset32 regset;
size_t nregs;
- struct dentry *parent;
struct list_head list;
};
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 8067f178fa848d7f33699e739b82a45ff54161f6..cf5e1796217987fcd482600047aadc240a9f0384 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -933,7 +933,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
* that tt_info, then free the child first. Recursive.
* We can't rely on udev at this point to find child-parent relationships.
*/
-void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
+static void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
{
struct xhci_virt_device *vdev;
struct list_head *tt_list_head;
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
index 32e15856878858dc028202d02e1620b10089666d..60651a50770f93aa9e652e4ddbd127169cceba7a 100644
--- a/drivers/usb/host/xhci-mvebu.c
+++ b/drivers/usb/host/xhci-mvebu.c
@@ -13,6 +13,7 @@
#include <linux/usb/hcd.h>
#include "xhci-mvebu.h"
+#include "xhci.h"
#define USB3_MAX_WINDOWS 4
#define USB3_WIN_CTRL(w) (0x0 + ((w) * 8))
@@ -72,3 +73,13 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
return 0;
}
+
+int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ /* Without reset on resume, the HC won't work at all */
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+
+ return 0;
+}
diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h
index 09791df2cec0c5207e360b01dde4d3618ec8bac4..ca0a3a5721dd720f58e715e302a67b444f8858fd 100644
--- a/drivers/usb/host/xhci-mvebu.h
+++ b/drivers/usb/host/xhci-mvebu.h
@@ -12,10 +12,16 @@ struct usb_hcd;
#if IS_ENABLED(CONFIG_USB_XHCI_MVEBU)
int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd);
+int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd);
#else
static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
{
return 0;
}
+
+static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
+{
+ return 0;
+}
#endif
#endif /* __LINUX_XHCI_MVEBU_H */
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index a9ec7051f286414cff61cfe492b6de17a4f74462..c2fe218e051f04431b1413760626f4e012adc097 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -194,6 +194,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index ef09cb06212fd367da3593092a31dd5c32d95f58..0ac4ec975547f0e84b59e1c03c5e03ee5f146778 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -98,6 +98,10 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = {
.init_quirk = xhci_mvebu_mbus_init_quirk,
};
+static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
+ .init_quirk = xhci_mvebu_a3700_init_quirk,
+};
+
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
.init_quirk = xhci_rcar_init_quirk,
@@ -123,6 +127,9 @@ static const struct of_device_id usb_xhci_of_match[] = {
}, {
.compatible = "marvell,armada-380-xhci",
.data = &xhci_plat_marvell_armada,
+ }, {
+ .compatible = "marvell,armada3700-xhci",
+ .data = &xhci_plat_marvell_armada3700,
}, {
.compatible = "renesas,xhci-r8a7790",
.data = &xhci_plat_renesas_rcar_gen2,
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 938ff06c034959f445dc8ad764d2e8a97887c15b..efb0cad8710e3dcbc484ec2e78742fa14e79dbb8 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -941,9 +941,9 @@ static void tegra_xusb_powerdomain_remove(struct device *dev,
device_link_del(tegra->genpd_dl_ss);
if (tegra->genpd_dl_host)
device_link_del(tegra->genpd_dl_host);
- if (tegra->genpd_dev_ss)
+ if (!IS_ERR_OR_NULL(tegra->genpd_dev_ss))
dev_pm_domain_detach(tegra->genpd_dev_ss, true);
- if (tegra->genpd_dev_host)
+ if (!IS_ERR_OR_NULL(tegra->genpd_dev_host))
dev_pm_domain_detach(tegra->genpd_dev_host, true);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 005e65922608e9f0f72c3f06d26a9a436d1362f7..7fa58c99f12614962a1f852711b699929799f1e5 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1455,8 +1455,7 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag
else
num_tds = 1;
- urb_priv = kzalloc(sizeof(struct urb_priv) +
- num_tds * sizeof(struct xhci_td), mem_flags);
+ urb_priv = kzalloc(struct_size(urb_priv, td, num_tds), mem_flags);
if (!urb_priv)
return -ENOMEM;
diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig
index 320d368c8dace716b9f6e4a52085efba50d552bd..26c75f309da9316ef962996d655355cec51d8f68 100644
--- a/drivers/usb/image/Kconfig
+++ b/drivers/usb/image/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Imaging devices configuration
#
diff --git a/drivers/usb/isp1760/Kconfig b/drivers/usb/isp1760/Kconfig
index c94b7d9533999db817a0b4492821fc5f7b7013d3..b1022cc490a2ca520d020df738807bdc30b463c8 100644
--- a/drivers/usb/isp1760/Kconfig
+++ b/drivers/usb/isp1760/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config USB_ISP1760
tristate "NXP ISP 1760/1761 support"
depends on USB || USB_GADGET
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 68d2f2cd17dda953d2efcca2a99c5083a2213c89..be04c117fe809430769428ef5bca3f83783050e9 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Miscellaneous driver configuration
#
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 76c718ac8c78d1189a91f33b778a3600cec1856b..257efacf3551ab02fb67261a04e02bcd36dbc573 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -915,7 +915,6 @@ static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi)
int bytes_read = 0;
int retry_on_empty = 1;
int retry_on_timeout = 3;
- int empty_packets = 0;
read:{
int packet_bytes = 0;
int retval = usb_bulk_msg(ftdi->udev,
@@ -960,31 +959,6 @@ read:{
dev_err(&ftdi->udev->dev, "error = %d with packet_bytes = %d with total %d bytes%s\n",
retval, packet_bytes, bytes_read, diag);
return retval;
- } else if (packet_bytes == 2) {
- unsigned char s0 = ftdi->bulk_in_buffer[0];
- unsigned char s1 = ftdi->bulk_in_buffer[1];
- empty_packets += 1;
- if (s0 == 0x31 && s1 == 0x60) {
- if (retry_on_empty-- > 0) {
- goto more;
- } else
- return 0;
- } else if (s0 == 0x31 && s1 == 0x00) {
- if (retry_on_empty-- > 0) {
- goto more;
- } else
- return 0;
- } else {
- if (retry_on_empty-- > 0) {
- goto more;
- } else
- return 0;
- }
- } else if (packet_bytes == 1) {
- if (retry_on_empty-- > 0) {
- goto more;
- } else
- return 0;
} else {
if (retry_on_empty-- > 0) {
goto more;
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 36bc28c884ad75afd2c5dbe4dcca4543236aa909..9b632ab24f03305c81daad362c852f8b5215da07 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
diff --git a/drivers/usb/misc/sisusbvga/Makefile b/drivers/usb/misc/sisusbvga/Makefile
index 6ed3a638261a95e78b7ef7bbe68283ac7c521bfe..6551bce68ac5de6690bec848386d9e5bf5688596 100644
--- a/drivers/usb/misc/sisusbvga/Makefile
+++ b/drivers/usb/misc/sisusbvga/Makefile
@@ -5,4 +5,5 @@
obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga.o
-sisusbvga-y := sisusb.o sisusb_init.o sisusb_con.o
+sisusbvga-y := sisusb.o
+sisusbvga-$(CONFIG_USB_SISUSBVGA_CON) += sisusb_con.o sisusb_init.o
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 3198d0477cf85db84cd697f22dc6652bbcdf6e3c..9560fde621ee5a8116912f9ee201b25db4c526ee 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -53,7 +53,7 @@
#include "sisusb.h"
#include "sisusb_init.h"
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
#include <linux/font.h>
#endif
@@ -61,7 +61,7 @@
/* Forward declarations / clean-up routines */
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
static int sisusb_first_vc;
static int sisusb_last_vc;
module_param_named(first, sisusb_first_vc, int, 0);
@@ -1198,7 +1198,7 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
/* High level: Gfx (indexed) register access */
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data)
{
return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
@@ -1272,7 +1272,7 @@ int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
/* Write/read video ram */
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data)
{
return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data);
@@ -2255,7 +2255,7 @@ static int sisusb_init_gfxdevice(struct sisusb_usb_data *sisusb, int initscreen)
}
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
/* Set up default text mode:
* - Set text mode (0x03)
@@ -2448,7 +2448,7 @@ void sisusb_delete(struct kref *kref)
sisusb->sisusb_dev = NULL;
sisusb_free_buffers(sisusb);
sisusb_free_urbs(sisusb);
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
kfree(sisusb->SiS_Pr);
#endif
kfree(sisusb);
@@ -2844,7 +2844,7 @@ static int sisusb_handle_command(struct sisusb_usb_data *sisusb,
case SUCMD_HANDLETEXTMODE:
retval = 0;
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
/* Gfx core must be initialized, SiS_Pr must exist */
if (!sisusb->gfxinit || !sisusb->SiS_Pr)
return -ENODEV;
@@ -2860,7 +2860,7 @@ static int sisusb_handle_command(struct sisusb_usb_data *sisusb,
#endif
break;
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
case SUCMD_SETMODE:
/* Gfx core must be initialized, SiS_Pr must exist */
if (!sisusb->gfxinit || !sisusb->SiS_Pr)
@@ -2944,7 +2944,7 @@ static long sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
x.sisusb_vramsize = sisusb->vramsize;
x.sisusb_minor = sisusb->minor;
x.sisusb_fbdevactive = 0;
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
x.sisusb_conactive = sisusb->haveconsole ? 1 : 0;
#else
x.sisusb_conactive = 0;
@@ -2975,7 +2975,7 @@ static long sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return retval;
}
-#ifdef SISUSB_NEW_CONFIG_COMPAT
+#ifdef CONFIG_COMPAT
static long sisusb_compat_ioctl(struct file *f, unsigned int cmd,
unsigned long arg)
{
@@ -2998,7 +2998,7 @@ static const struct file_operations usb_sisusb_fops = {
.read = sisusb_read,
.write = sisusb_write,
.llseek = sisusb_lseek,
-#ifdef SISUSB_NEW_CONFIG_COMPAT
+#ifdef CONFIG_COMPAT
.compat_ioctl = sisusb_compat_ioctl,
#endif
.unlocked_ioctl = sisusb_ioctl
@@ -3091,7 +3091,7 @@ static int sisusb_probe(struct usb_interface *intf,
dev_info(&sisusb->sisusb_dev->dev, "Allocated %d output buffers\n",
sisusb->numobufs);
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
/* Allocate our SiS_Pr */
sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL);
if (!sisusb->SiS_Pr) {
@@ -3112,7 +3112,7 @@ static int sisusb_probe(struct usb_interface *intf,
if (dev->speed == USB_SPEED_HIGH || dev->speed >= USB_SPEED_SUPER) {
int initscreen = 1;
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
if (sisusb_first_vc > 0 && sisusb_last_vc > 0 &&
sisusb_first_vc <= sisusb_last_vc &&
sisusb_last_vc <= MAX_NR_CONSOLES)
@@ -3134,7 +3134,7 @@ static int sisusb_probe(struct usb_interface *intf,
dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST END ***\n");
#endif
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
sisusb_console_init(sisusb, sisusb_first_vc, sisusb_last_vc);
#endif
@@ -3160,7 +3160,7 @@ static void sisusb_disconnect(struct usb_interface *intf)
if (!sisusb)
return;
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
sisusb_console_exit(sisusb);
#endif
@@ -3210,7 +3210,7 @@ static struct usb_driver sisusb_driver = {
static int __init usb_sisusb_init(void)
{
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
sisusb_init_concode();
#endif
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index 20f03ad0ea167726f021a9632d1ce3e190a7056f..8a5e6bb07d05668dccf2b8e27acdd4a57e53126e 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -38,17 +38,8 @@
#ifndef _SISUSB_H_
#define _SISUSB_H_
-#ifdef CONFIG_COMPAT
-#define SISUSB_NEW_CONFIG_COMPAT
-#endif
-
#include <linux/mutex.h>
-/* For older kernels, support for text consoles is by default
- * off. To enable text console support, change the following:
- */
-/* #define CONFIG_USB_SISUSBVGA_CON */
-
/* Version Information */
#define SISUSB_VERSION 0
@@ -57,10 +48,6 @@
/* Include console and mode switching code? */
-#ifdef CONFIG_USB_SISUSBVGA_CON
-#define INCL_SISUSB_CON 1
-#endif
-
#include <linux/console.h>
#include <linux/vt_kern.h>
#include "sisusb_struct.h"
@@ -139,7 +126,7 @@ struct sisusb_usb_data {
unsigned char gfxinit; /* graphics core initialized? */
unsigned short chipid, chipvendor;
unsigned short chiprevision;
-#ifdef INCL_SISUSB_CON
+#ifdef CONFIG_USB_SISUSBVGA_CON
struct SiS_Private *SiS_Pr;
unsigned long scrbuf;
unsigned int scrbuf_size;
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index c4f017e1d17a0f09a6c73d58d67b0b98a3fa152b..cd0155310fead19f02d97d510acd1844a6597643 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -70,13 +70,6 @@
#include "sisusb.h"
#include "sisusb_init.h"
-#ifdef INCL_SISUSB_CON
-
-#define sisusbcon_writew(val, addr) (*(addr) = (val))
-#define sisusbcon_readw(addr) (*(addr))
-#define sisusbcon_memmovew(d, s, c) memmove(d, s, c)
-#define sisusbcon_memcpyw(d, s, c) memcpy(d, s, c)
-
/* vc_data -> sisusb conversion table */
static struct sisusb_usb_data *mysisusbs[MAX_NR_CONSOLES];
@@ -86,9 +79,7 @@ static const struct consw sisusb_con;
static inline void
sisusbcon_memsetw(u16 *s, u16 c, unsigned int count)
{
- count /= 2;
- while (count--)
- sisusbcon_writew(c, s++);
+ memset16(s, c, count / 2);
}
static inline void
@@ -346,25 +337,30 @@ sisusbcon_invert_region(struct vc_data *vc, u16 *p, int count)
*/
while (count--) {
- u16 a = sisusbcon_readw(p);
-
- a = ((a) & 0x88ff) |
- (((a) & 0x7000) >> 4) |
- (((a) & 0x0700) << 4);
+ u16 a = *p;
- sisusbcon_writew(a, p++);
+ *p++ = ((a) & 0x88ff) |
+ (((a) & 0x7000) >> 4) |
+ (((a) & 0x0700) << 4);
}
}
-#define SISUSB_VADDR(x,y) \
- ((u16 *)c->vc_origin + \
- (y) * sisusb->sisusb_num_columns + \
- (x))
+static inline void *sisusb_vaddr(const struct sisusb_usb_data *sisusb,
+ const struct vc_data *c, unsigned int x, unsigned int y)
+{
+ return (u16 *)c->vc_origin + y * sisusb->sisusb_num_columns + x;
+}
+
+static inline unsigned long sisusb_haddr(const struct sisusb_usb_data *sisusb,
+ const struct vc_data *c, unsigned int x, unsigned int y)
+{
+ unsigned long offset = c->vc_origin - sisusb->scrbuf;
-#define SISUSB_HADDR(x,y) \
- ((u16 *)(sisusb->vrambase + (c->vc_origin - sisusb->scrbuf)) + \
- (y) * sisusb->sisusb_num_columns + \
- (x))
+ /* 2 bytes per each character */
+ offset += 2 * (y * sisusb->sisusb_num_columns + x);
+
+ return sisusb->vrambase + offset;
+}
/* Interface routine */
static void
@@ -382,9 +378,8 @@ sisusbcon_putc(struct vc_data *c, int ch, int y, int x)
return;
}
-
- sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
- (long)SISUSB_HADDR(x, y), 2);
+ sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y),
+ sisusb_haddr(sisusb, c, x, y), 2);
mutex_unlock(&sisusb->lock);
}
@@ -395,8 +390,6 @@ sisusbcon_putcs(struct vc_data *c, const unsigned short *s,
int count, int y, int x)
{
struct sisusb_usb_data *sisusb;
- u16 *dest;
- int i;
sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
if (!sisusb)
@@ -408,18 +401,15 @@ sisusbcon_putcs(struct vc_data *c, const unsigned short *s,
* because the vt does this AFTER calling us.
*/
- dest = SISUSB_VADDR(x, y);
-
- for (i = count; i > 0; i--)
- sisusbcon_writew(sisusbcon_readw(s++), dest++);
+ memcpy(sisusb_vaddr(sisusb, c, x, y), s, count * 2);
if (sisusb_is_inactive(c, sisusb)) {
mutex_unlock(&sisusb->lock);
return;
}
- sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
- (long)SISUSB_HADDR(x, y), count * 2);
+ sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y),
+ sisusb_haddr(sisusb, c, x, y), count * 2);
mutex_unlock(&sisusb->lock);
}
@@ -446,7 +436,7 @@ sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width)
* this AFTER calling us.
*/
- dest = SISUSB_VADDR(x, y);
+ dest = sisusb_vaddr(sisusb, c, x, y);
cols = sisusb->sisusb_num_columns;
@@ -472,8 +462,8 @@ sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width)
length = ((height * cols) - x - (cols - width - x)) * 2;
- sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(x, y),
- (long)SISUSB_HADDR(x, y), length);
+ sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y),
+ sisusb_haddr(sisusb, c, x, y), length);
mutex_unlock(&sisusb->lock);
}
@@ -517,12 +507,10 @@ sisusbcon_switch(struct vc_data *c)
(int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin));
/* Restore the screen contents */
- sisusbcon_memcpyw((u16 *)c->vc_origin, (u16 *)c->vc_screenbuf,
- length);
+ memcpy((u16 *)c->vc_origin, (u16 *)c->vc_screenbuf, length);
- sisusb_copy_memory(sisusb, (unsigned char *)c->vc_origin,
- (long)SISUSB_HADDR(0, 0),
- length);
+ sisusb_copy_memory(sisusb, (char *)c->vc_origin,
+ sisusb_haddr(sisusb, c, 0, 0), length);
mutex_unlock(&sisusb->lock);
@@ -556,8 +544,7 @@ sisusbcon_save_screen(struct vc_data *c)
(int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin));
/* Save the screen contents to vc's private buffer */
- sisusbcon_memcpyw((u16 *)c->vc_screenbuf, (u16 *)c->vc_origin,
- length);
+ memcpy((u16 *)c->vc_screenbuf, (u16 *)c->vc_origin, length);
mutex_unlock(&sisusb->lock);
}
@@ -628,10 +615,8 @@ sisusbcon_blank(struct vc_data *c, int blank, int mode_switch)
sisusbcon_memsetw((u16 *)c->vc_origin,
c->vc_video_erase_char,
c->vc_screenbuf_size);
- sisusb_copy_memory(sisusb,
- (unsigned char *)c->vc_origin,
- (u32)(sisusb->vrambase +
- (c->vc_origin - sisusb->scrbuf)),
+ sisusb_copy_memory(sisusb, (char *)c->vc_origin,
+ sisusb_haddr(sisusb, c, 0, 0),
c->vc_screenbuf_size);
sisusb->con_blanked = 1;
ret = 1;
@@ -796,24 +781,24 @@ sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
switch (dir) {
case SM_UP:
- sisusbcon_memmovew(SISUSB_VADDR(0, t),
- SISUSB_VADDR(0, t + lines),
+ memmove(sisusb_vaddr(sisusb, c, 0, t),
+ sisusb_vaddr(sisusb, c, 0, t + lines),
(b - t - lines) * cols * 2);
- sisusbcon_memsetw(SISUSB_VADDR(0, b - lines), eattr,
- lines * cols * 2);
+ sisusbcon_memsetw(sisusb_vaddr(sisusb, c, 0, b - lines),
+ eattr, lines * cols * 2);
break;
case SM_DOWN:
- sisusbcon_memmovew(SISUSB_VADDR(0, t + lines),
- SISUSB_VADDR(0, t),
+ memmove(sisusb_vaddr(sisusb, c, 0, t + lines),
+ sisusb_vaddr(sisusb, c, 0, t),
(b - t - lines) * cols * 2);
- sisusbcon_memsetw(SISUSB_VADDR(0, t), eattr,
+ sisusbcon_memsetw(sisusb_vaddr(sisusb, c, 0, t), eattr,
lines * cols * 2);
break;
}
- sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(0, t),
- (long)SISUSB_HADDR(0, t), length);
+ sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, 0, t),
+ sisusb_haddr(sisusb, c, 0, t), length);
mutex_unlock(&sisusb->lock);
@@ -830,7 +815,6 @@ sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
int copyall = 0;
unsigned long oldorigin;
unsigned int delta = lines * c->vc_size_row;
- u32 originoffset;
/* Returning != 0 means we have done the scrolling successfully.
* Returning 0 makes vt do the scrolling on its own.
@@ -874,7 +858,7 @@ sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
if (c->vc_scr_end + delta >=
sisusb->scrbuf + sisusb->scrbuf_size) {
- sisusbcon_memcpyw((u16 *)sisusb->scrbuf,
+ memcpy((u16 *)sisusb->scrbuf,
(u16 *)(oldorigin + delta),
c->vc_screenbuf_size - delta);
c->vc_origin = sisusb->scrbuf;
@@ -892,12 +876,10 @@ sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
case SM_DOWN:
if (oldorigin - delta < sisusb->scrbuf) {
- sisusbcon_memmovew((u16 *)(sisusb->scrbuf +
- sisusb->scrbuf_size -
- c->vc_screenbuf_size +
- delta),
- (u16 *)oldorigin,
- c->vc_screenbuf_size - delta);
+ memmove((void *)sisusb->scrbuf + sisusb->scrbuf_size -
+ c->vc_screenbuf_size + delta,
+ (u16 *)oldorigin,
+ c->vc_screenbuf_size - delta);
c->vc_origin = sisusb->scrbuf +
sisusb->scrbuf_size -
c->vc_screenbuf_size;
@@ -913,23 +895,21 @@ sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
break;
}
- originoffset = (u32)(c->vc_origin - sisusb->scrbuf);
-
if (copyall)
sisusb_copy_memory(sisusb,
(char *)c->vc_origin,
- (u32)(sisusb->vrambase + originoffset),
+ sisusb_haddr(sisusb, c, 0, 0),
c->vc_screenbuf_size);
else if (dir == SM_UP)
sisusb_copy_memory(sisusb,
(char *)c->vc_origin + c->vc_screenbuf_size - delta,
- (u32)sisusb->vrambase + originoffset +
+ sisusb_haddr(sisusb, c, 0, 0) +
c->vc_screenbuf_size - delta,
delta);
else
sisusb_copy_memory(sisusb,
(char *)c->vc_origin,
- (u32)(sisusb->vrambase + originoffset),
+ sisusb_haddr(sisusb, c, 0, 0),
delta);
c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size;
@@ -1534,8 +1514,3 @@ void __init sisusb_init_concode(void)
for (i = 0; i < MAX_NR_CONSOLES; i++)
mysisusbs[i] = NULL;
}
-
-#endif /* INCL_CON */
-
-
-
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
index 6a30e8bd9221b8b39835f135e4b100a27afd935e..66f6ab5acd974a26c75fba75ef08bc17dc300b3c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -44,9 +44,6 @@
#include <linux/spinlock.h>
#include "sisusb.h"
-
-#ifdef INCL_SISUSB_CON
-
#include "sisusb_init.h"
/*********************************************/
@@ -955,5 +952,3 @@ int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
return SiSUSBSetMode(SiS_Pr, ModeNo);
}
-
-#endif /* INCL_SISUSB_CON */
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index a6efb9a7293912ca5647b31622a579f8f348e9fd..4d72b7d1d383be2643d09756f11f709a8b1906a5 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -337,10 +337,12 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
int len, err, i;
- u32 property_u32 = 0;
+ u32 port, property_u32 = 0;
const u32 *cproperty_u32;
const char *cproperty_char;
char str[USB251XB_STRING_BUFSIZE / 2];
+ struct property *prop;
+ const __be32 *p;
if (!np) {
dev_err(dev, "failed to get ofdata\n");
@@ -539,6 +541,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
(wchar_t *)hub->serial,
USB251XB_STRING_BUFSIZE);
+ /*
+ * The datasheet documents the register as 'Port Swap' but in real the
+ * register controls the USB DP/DM signal swapping for each port.
+ */
+ hub->port_swap = USB251XB_DEF_PORT_SWAP;
+ of_property_for_each_u32(np, "swap-dx-lanes", prop, p, port) {
+ if ((port >= 0) && (port <= data->port_cnt))
+ hub->port_swap |= BIT(port);
+ }
+
/* The following parameters are currently not exposed to devicetree, but
* may be as soon as needed.
*/
@@ -546,7 +558,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
hub->boost_up = USB251XB_DEF_BOOST_UP;
hub->boost_57 = USB251XB_DEF_BOOST_57;
hub->boost_14 = USB251XB_DEF_BOOST_14;
- hub->port_swap = USB251XB_DEF_PORT_SWAP;
hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index f723f7b8c9ac4cdb65e5beb9a401ac3ce64f99e2..d5141aa79dd4045c9bdcd6a4c66a4bb3df4c736c 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -355,11 +355,8 @@ static int usb3503_platform_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
-static int usb3503_i2c_suspend(struct device *dev)
+static int usb3503_suspend(struct usb3503 *hub)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct usb3503 *hub = i2c_get_clientdata(client);
-
usb3503_switch_mode(hub, USB3503_MODE_STANDBY);
if (hub->clk)
@@ -368,11 +365,8 @@ static int usb3503_i2c_suspend(struct device *dev)
return 0;
}
-static int usb3503_i2c_resume(struct device *dev)
+static int usb3503_resume(struct usb3503 *hub)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct usb3503 *hub = i2c_get_clientdata(client);
-
if (hub->clk)
clk_prepare_enable(hub->clk);
@@ -380,11 +374,38 @@ static int usb3503_i2c_resume(struct device *dev)
return 0;
}
+
+static int usb3503_i2c_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ return usb3503_suspend(i2c_get_clientdata(client));
+}
+
+static int usb3503_i2c_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ return usb3503_resume(i2c_get_clientdata(client));
+}
+
+static int usb3503_platform_suspend(struct device *dev)
+{
+ return usb3503_suspend(dev_get_drvdata(dev));
+}
+
+static int usb3503_platform_resume(struct device *dev)
+{
+ return usb3503_resume(dev_get_drvdata(dev));
+}
#endif
static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend,
usb3503_i2c_resume);
+static SIMPLE_DEV_PM_OPS(usb3503_platform_pm_ops, usb3503_platform_suspend,
+ usb3503_platform_resume);
+
static const struct i2c_device_id usb3503_id[] = {
{ USB3503_I2C_NAME, 0 },
{ }
@@ -415,6 +436,7 @@ static struct platform_driver usb3503_platform_driver = {
.driver = {
.name = USB3503_I2C_NAME,
.of_match_table = of_match_ptr(usb3503_of_match),
+ .pm = &usb3503_platform_pm_ops,
},
.probe = usb3503_platform_probe,
.remove = usb3503_platform_remove,
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index c7f82310e73ec3f933b6cff1e62dc37d367abe3f..98ada1a3425c6cd5cddb5d6cb4167da2d949b17d 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -347,6 +347,14 @@ static unsigned get_maxpacket(struct usb_device *udev, int pipe)
return le16_to_cpup(&ep->desc.wMaxPacketSize);
}
+static int ss_isoc_get_packet_num(struct usb_device *udev, int pipe)
+{
+ struct usb_host_endpoint *ep = usb_pipe_endpoint(udev, pipe);
+
+ return USB_SS_MULT(ep->ss_ep_comp.bmAttributes)
+ * (1 + ep->ss_ep_comp.bMaxBurst);
+}
+
static void simple_fill_buf(struct urb *urb)
{
unsigned i;
@@ -1976,8 +1984,13 @@ static struct urb *iso_alloc_urb(
if (bytes < 0 || !desc)
return NULL;
+
maxp = usb_endpoint_maxp(desc);
- maxp *= usb_endpoint_maxp_mult(desc);
+ if (udev->speed >= USB_SPEED_SUPER)
+ maxp *= ss_isoc_get_packet_num(udev, pipe);
+ else
+ maxp *= usb_endpoint_maxp_mult(desc);
+
packets = DIV_ROUND_UP(bytes, maxp);
urb = usb_alloc_urb(packets, GFP_KERNEL);
@@ -2065,17 +2078,24 @@ test_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param,
packets *= param->iterations;
if (context.is_iso) {
+ int transaction_num;
+
+ if (udev->speed >= USB_SPEED_SUPER)
+ transaction_num = ss_isoc_get_packet_num(udev, pipe);
+ else
+ transaction_num = usb_endpoint_maxp_mult(desc);
+
dev_info(&dev->intf->dev,
"iso period %d %sframes, wMaxPacket %d, transactions: %d\n",
1 << (desc->bInterval - 1),
- (udev->speed == USB_SPEED_HIGH) ? "micro" : "",
+ (udev->speed >= USB_SPEED_HIGH) ? "micro" : "",
usb_endpoint_maxp(desc),
- usb_endpoint_maxp_mult(desc));
+ transaction_num);
dev_info(&dev->intf->dev,
"total %lu msec (%lu packets)\n",
(packets * (1 << (desc->bInterval - 1)))
- / ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
+ / ((udev->speed >= USB_SPEED_HIGH) ? 8 : 1),
packets);
}
diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig
index 5c6ffa2a612eff0223467c4bd08461fc7c11b7fa..48f1b2dadb2460c80cfb4b1c31c84324da83e9e4 100644
--- a/drivers/usb/mon/Kconfig
+++ b/drivers/usb/mon/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Monitor configuration
#
diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig
index 40bbf1f5333785c27e6ef965db3f7a53b6d95daf..bcc23486c4ed2813da698e14faf0e11366577afb 100644
--- a/drivers/usb/mtu3/Kconfig
+++ b/drivers/usb/mtu3/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+#
# For MTK USB3.0 IP
config USB_MTU3
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index ad08895e78f9631c0935aeba9704a0b948fd6d32..f742fddc5e2ca6630e8d2d5d8e98d3c90b918a2f 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Dual Role (OTG-ready) Controller Drivers
# for silicon based on Mentor Graphics INVENTRA designs
@@ -111,9 +112,9 @@ config USB_MUSB_UX500
config USB_MUSB_JZ4740
tristate "JZ4740"
depends on NOP_USB_XCEIV
- depends on MACH_JZ4740 || COMPILE_TEST
+ depends on MIPS || COMPILE_TEST
depends on USB_MUSB_GADGET
- depends on USB_OTG_BLACKLIST_HUB
+ depends on USB=n || USB_OTG_BLACKLIST_HUB
config USB_MUSB_AM335X_CHILD
tristate
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 04d8b2bc205ac40049a6f88f67c538ce5709628c..a60627bf7be39024e388f99da439c8f474ec41ee 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -10,6 +10,7 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/usb/usb_phy_generic.h>
@@ -188,11 +189,20 @@ static int jz4740_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id jz4740_musb_of_match[] = {
+ { .compatible = "ingenic,jz4740-musb" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4740_musb_of_match);
+#endif
+
static struct platform_driver jz4740_driver = {
.probe = jz4740_probe,
.remove = jz4740_remove,
.driver = {
.name = "musb-jz4740",
+ .of_match_table = of_match_ptr(jz4740_musb_of_match),
},
};
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index b59ce9ad14ce4e8271a4226774bb23658d8709b2..eb308ec35c66207908ad5cdb0c5faf0ffabe09e4 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -378,7 +378,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
qh = first_qh(head);
break;
}
- /* else: fall through */
+ /* fall through */
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_INT:
@@ -1283,7 +1283,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
MUSB_TXCSR_H_WZC_BITS
| MUSB_TXCSR_TXPKTRDY);
}
- return;
+ return;
}
done:
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 91ea3083e7ad97793872fbb9459ab205fd9b5161..8c509b060c094c8f6d5e33ebc1fe5401ab20a0ee 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# Physical Layer USB driver configuration
#
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 183550b63faadc8aaac5a68b1b3eb8706b511265..dade34d704198f9320da4f6894c219b9e17a9cec 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -400,7 +400,7 @@ static int twl6030_usb_remove(struct platform_device *pdev)
{
struct twl6030_usb *twl = platform_get_drvdata(pdev);
- cancel_delayed_work(&twl->get_status_work);
+ cancel_delayed_work_sync(&twl->get_status_work);
twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
REG_INT_MSK_LINE_C);
twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 4e59c649db815524e1164b0197d99b8f893177e2..ddd3be48f948472cb1c884f551ad13e858c53a01 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -340,7 +340,7 @@ static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv,
pipe = usbhsh_uep_to_pipe(uep);
if (unlikely(!pipe)) {
- dev_err(dev, "uep doens't have pipe\n");
+ dev_err(dev, "uep doesn't have pipe\n");
} else if (1 == uep->counter--) { /* last user */
struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep);
struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);
diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c
index aa38204482865f045de02cb26dd931faa87065ac..5e730e9b40ef5deef67aa45f90dba2e6e83941a2 100644
--- a/drivers/usb/renesas_usbhs/rcar3.c
+++ b/drivers/usb/renesas_usbhs/rcar3.c
@@ -59,7 +59,7 @@ static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
if (enable) {
usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
/* The controller on R-Car Gen3 needs to wait up to 45 usec */
- udelay(45);
+ usleep_range(45, 90);
} else {
usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
}
diff --git a/drivers/usb/renesas_usbhs/rza.c b/drivers/usb/renesas_usbhs/rza.c
index 5b287257ec11c02e2c4e39b17dc00eb06c7ed680..8c739bd24acd2da8097509822a82988dbc8e4248 100644
--- a/drivers/usb/renesas_usbhs/rza.c
+++ b/drivers/usb/renesas_usbhs/rza.c
@@ -35,7 +35,7 @@ static int usbhs_rza1_hardware_init(struct platform_device *pdev)
/* Enable USB PLL (NOTE: ch0 controls both ch0 and ch1) */
usbhs_bset(priv, SYSCFG, UPLLE, UPLLE);
- udelay(1000);
+ usleep_range(1000, 2000);
usbhs_bset(priv, SUSPMODE, SUSPM, SUSPM);
return 0;
diff --git a/drivers/usb/roles/Kconfig b/drivers/usb/roles/Kconfig
index e4194ac94510771cafedfa9ec6e6edb24539d538..f8b31aa67526b4bfc7a1ee220227f7f23b5ff859 100644
--- a/drivers/usb/roles/Kconfig
+++ b/drivers/usb/roles/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config USB_ROLE_SWITCH
tristate "USB Role Switch Support"
help
diff --git a/drivers/usb/roles/Makefile b/drivers/usb/roles/Makefile
index c02873206fc1855c6f162782193e2d26be9e88a5..757a7d2797eb6a416d27a5d51ee481ddf37c9619 100644
--- a/drivers/usb/roles/Makefile
+++ b/drivers/usb/roles/Makefile
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
obj-$(CONFIG_USB_ROLE_SWITCH) += roles.o
roles-y := class.o
obj-$(CONFIG_USB_ROLES_INTEL_XHCI) += intel-xhci-usb-role-switch.o
diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index 99116af07f1d9ca1e7c275a70122f370ec0d32a3..f45d8df5cfb8aa3255f89f6dde016614c9e11ea4 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -8,6 +8,7 @@
*/
#include <linux/usb/role.h>
+#include <linux/property.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/mutex.h>
@@ -84,7 +85,12 @@ enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw)
}
EXPORT_SYMBOL_GPL(usb_role_switch_get_role);
-static int __switch_match(struct device *dev, const void *name)
+static int switch_fwnode_match(struct device *dev, const void *fwnode)
+{
+ return dev_fwnode(dev) == fwnode;
+}
+
+static int switch_name_match(struct device *dev, const void *name)
{
return !strcmp((const char *)name, dev_name(dev));
}
@@ -94,8 +100,16 @@ static void *usb_role_switch_match(struct device_connection *con, int ep,
{
struct device *dev;
- dev = class_find_device(role_class, NULL, con->endpoint[ep],
- __switch_match);
+ if (con->fwnode) {
+ if (!fwnode_property_present(con->fwnode, con->id))
+ return NULL;
+
+ dev = class_find_device(role_class, NULL, con->fwnode,
+ switch_fwnode_match);
+ } else {
+ dev = class_find_device(role_class, NULL, con->endpoint[ep],
+ switch_name_match);
+ }
return dev ? to_role_switch(dev) : ERR_PTR(-EPROBE_DEFER);
}
@@ -266,6 +280,7 @@ usb_role_switch_register(struct device *parent,
sw->get = desc->get;
sw->dev.parent = parent;
+ sw->dev.fwnode = desc->fwnode;
sw->dev.class = role_class;
sw->dev.type = &usb_role_dev_type;
dev_set_name(&sw->dev, "%s-role-switch", dev_name(parent));
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 533f127c30ad846f236170f36a61a127ea9db6ab..7d031911d04edbf24acc722bcf4cc3d36e2d5fde 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Serial device configuration
#
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index c0777a374a88f86847b8ada0891d9849e7aa70a8..fffe23ab0189a00b1a7747662c9248cfd41770ae 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -61,6 +61,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
+ { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
@@ -245,6 +246,7 @@ struct cp210x_serial_private {
u8 gpio_input;
#endif
u8 partnum;
+ speed_t min_speed;
speed_t max_speed;
bool use_actual_rate;
};
@@ -443,10 +445,10 @@ struct cp210x_pin_mode {
#define CP210X_PIN_MODE_GPIO BIT(0)
/*
- * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes.
- * Structure needs padding due to unused/unspecified bytes.
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes
+ * on a CP2105 chip. Structure needs padding due to unused/unspecified bytes.
*/
-struct cp210x_config {
+struct cp210x_dual_port_config {
__le16 gpio_mode;
u8 __pad0[2];
__le16 reset_state;
@@ -457,6 +459,19 @@ struct cp210x_config {
u8 device_cfg;
} __packed;
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xd bytes
+ * on a CP2104 chip. Structure needs padding due to unused/unspecified bytes.
+ */
+struct cp210x_single_port_config {
+ __le16 gpio_mode;
+ u8 __pad0[2];
+ __le16 reset_state;
+ u8 __pad1[4];
+ __le16 suspend_state;
+ u8 device_cfg;
+} __packed;
+
/* GPIO modes */
#define CP210X_SCI_GPIO_MODE_OFFSET 9
#define CP210X_SCI_GPIO_MODE_MASK GENMASK(11, 9)
@@ -464,11 +479,19 @@ struct cp210x_config {
#define CP210X_ECI_GPIO_MODE_OFFSET 2
#define CP210X_ECI_GPIO_MODE_MASK GENMASK(3, 2)
+#define CP210X_GPIO_MODE_OFFSET 8
+#define CP210X_GPIO_MODE_MASK GENMASK(11, 8)
+
/* CP2105 port configuration values */
#define CP2105_GPIO0_TXLED_MODE BIT(0)
#define CP2105_GPIO1_RXLED_MODE BIT(1)
#define CP2105_GPIO1_RS485_MODE BIT(2)
+/* CP2104 port configuration values */
+#define CP2104_GPIO0_TXLED_MODE BIT(0)
+#define CP2104_GPIO1_RXLED_MODE BIT(1)
+#define CP2104_GPIO2_RS485_MODE BIT(2)
+
/* CP2102N configuration array indices */
#define CP210X_2NCONFIG_CONFIG_VERSION_IDX 2
#define CP210X_2NCONFIG_GPIO_MODE_IDX 581
@@ -1051,14 +1074,11 @@ static speed_t cp210x_get_an205_rate(speed_t baud)
return cp210x_an205_table1[i].rate;
}
-static speed_t cp210x_get_actual_rate(struct usb_serial *serial, speed_t baud)
+static speed_t cp210x_get_actual_rate(speed_t baud)
{
- struct cp210x_serial_private *priv = usb_get_serial_data(serial);
unsigned int prescale = 1;
unsigned int div;
- baud = clamp(baud, 300u, priv->max_speed);
-
if (baud <= 365)
prescale = 4;
@@ -1101,20 +1121,18 @@ static void cp210x_change_speed(struct tty_struct *tty,
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
u32 baud;
- baud = tty->termios.c_ospeed;
-
/*
* This maps the requested rate to the actual rate, a valid rate on
* cp2102 or cp2103, or to an arbitrary rate in [1M, max_speed].
*
* NOTE: B0 is not implemented.
*/
+ baud = clamp(tty->termios.c_ospeed, priv->min_speed, priv->max_speed);
+
if (priv->use_actual_rate)
- baud = cp210x_get_actual_rate(serial, baud);
+ baud = cp210x_get_actual_rate(baud);
else if (baud < 1000000)
baud = cp210x_get_an205_rate(baud);
- else if (baud > priv->max_speed)
- baud = priv->max_speed;
dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
@@ -1353,8 +1371,13 @@ static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
if (priv->partnum == CP210X_PARTNUM_CP2105)
req_type = REQTYPE_INTERFACE_TO_HOST;
+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
result = cp210x_read_vendor_block(serial, req_type,
CP210X_READ_LATCH, &buf, sizeof(buf));
+ usb_autopm_put_interface(serial->interface);
if (result < 0)
return result;
@@ -1375,6 +1398,10 @@ static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
buf.mask = BIT(gpio);
+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ goto out;
+
if (priv->partnum == CP210X_PARTNUM_CP2105) {
result = cp210x_write_vendor_block(serial,
REQTYPE_HOST_TO_INTERFACE,
@@ -1392,6 +1419,8 @@ static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
NULL, 0, USB_CTRL_SET_TIMEOUT);
}
+ usb_autopm_put_interface(serial->interface);
+out:
if (result < 0) {
dev_err(&serial->interface->dev, "failed to set GPIO value: %d\n",
result);
@@ -1470,7 +1499,7 @@ static int cp2105_gpioconf_init(struct usb_serial *serial)
{
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
struct cp210x_pin_mode mode;
- struct cp210x_config config;
+ struct cp210x_dual_port_config config;
u8 intf_num = cp210x_interface_num(serial);
u8 iface_config;
int result;
@@ -1529,6 +1558,56 @@ static int cp2105_gpioconf_init(struct usb_serial *serial)
return 0;
}
+static int cp2104_gpioconf_init(struct usb_serial *serial)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ struct cp210x_single_port_config config;
+ u8 iface_config;
+ u8 gpio_latch;
+ int result;
+ u8 i;
+
+ result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+ CP210X_GET_PORTCONFIG, &config,
+ sizeof(config));
+ if (result < 0)
+ return result;
+
+ priv->gc.ngpio = 4;
+
+ iface_config = config.device_cfg;
+ priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
+ CP210X_GPIO_MODE_MASK) >>
+ CP210X_GPIO_MODE_OFFSET);
+ gpio_latch = (u8)((le16_to_cpu(config.reset_state) &
+ CP210X_GPIO_MODE_MASK) >>
+ CP210X_GPIO_MODE_OFFSET);
+
+ /* mark all pins which are not in GPIO mode */
+ if (iface_config & CP2104_GPIO0_TXLED_MODE) /* GPIO 0 */
+ priv->gpio_altfunc |= BIT(0);
+ if (iface_config & CP2104_GPIO1_RXLED_MODE) /* GPIO 1 */
+ priv->gpio_altfunc |= BIT(1);
+ if (iface_config & CP2104_GPIO2_RS485_MODE) /* GPIO 2 */
+ priv->gpio_altfunc |= BIT(2);
+
+ /*
+ * Like CP2102N, CP2104 has also no strict input and output pin
+ * modes.
+ * Do the same input mode emulation as CP2102N.
+ */
+ for (i = 0; i < priv->gc.ngpio; ++i) {
+ /*
+ * Set direction to "input" iff pin is open-drain and reset
+ * value is 1.
+ */
+ if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
+ priv->gpio_input |= BIT(i);
+ }
+
+ return 0;
+}
+
static int cp2102n_gpioconf_init(struct usb_serial *serial)
{
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
@@ -1574,12 +1653,6 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial)
if (config_version != 0x01)
return -ENOTSUPP;
- /*
- * We only support 4 GPIOs even on the QFN28 package, because
- * config locations of GPIOs 4-6 determined using reverse
- * engineering revealed conflicting offsets with other
- * documented functions. So we'll just play it safe for now.
- */
priv->gc.ngpio = 4;
/*
@@ -1594,6 +1667,19 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial)
/* 0 indicates GPIO mode, 1 is alternate function */
priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+ if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
+ /*
+ * For the QFN28 package, GPIO4-6 are controlled by
+ * the low three bits of the mode/latch fields.
+ * Contrary to the document linked above, the bits for
+ * the SUSPEND pins are elsewhere. No alternate
+ * function is available for these pins.
+ */
+ priv->gc.ngpio = 7;
+ gpio_latch |= (gpio_rst_latch & 7) << 4;
+ priv->gpio_pushpull |= (gpio_pushpull & 7) << 4;
+ }
+
/*
* The CP2102N does not strictly has input and output pin modes,
* it only knows open-drain and push-pull modes which is set at
@@ -1620,6 +1706,9 @@ static int cp210x_gpio_init(struct usb_serial *serial)
int result;
switch (priv->partnum) {
+ case CP210X_PARTNUM_CP2104:
+ result = cp2104_gpioconf_init(serial);
+ break;
case CP210X_PARTNUM_CP2105:
result = cp2105_gpioconf_init(serial);
break;
@@ -1716,6 +1805,7 @@ static void cp210x_init_max_speed(struct usb_serial *serial)
{
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
bool use_actual_rate = false;
+ speed_t min = 300;
speed_t max;
switch (priv->partnum) {
@@ -1738,6 +1828,7 @@ static void cp210x_init_max_speed(struct usb_serial *serial)
use_actual_rate = true;
max = 2000000; /* ECI */
} else {
+ min = 2400;
max = 921600; /* SCI */
}
break;
@@ -1752,6 +1843,7 @@ static void cp210x_init_max_speed(struct usb_serial *serial)
break;
}
+ priv->min_speed = min;
priv->max_speed = max;
priv->use_actual_rate = use_actual_rate;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 77ef4c481f3ce42c7bcd24bd9c271ac64a46703f..8f5b1747175945f8830a909803acdc10b48f7de4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1025,6 +1025,8 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
+ /* EZPrototypes devices */
+ { USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 975d02666c5a0cf93cd647d8667f988e589c8171..b863bedb55a138b7a99abe0a82aab39e10b79e3f 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1308,6 +1308,12 @@
#define IONICS_VID 0x1c0c
#define IONICS_PLUGCOMPUTER_PID 0x0102
+/*
+ * EZPrototypes (PID reseller)
+ */
+#define EZPROTOTYPES_VID 0x1c40
+#define HJELMSLUND_USB485_ISO_PID 0x0477
+
/*
* Dresden Elektronik Sensor Terminal Board
*/
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index aef15497ff31fdcee40c921b741675ad057c31ad..11b21d9410f35306d299339d7a29554aa9cf47e3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1148,6 +1148,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
.driver_info = NCTRL(0) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff), /* Telit ME910 (ECM) */
+ .driver_info = NCTRL(0) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 6fd427284b126596a18e14dbb94a147aa8f59f47..59aad38b490a6da0c1c885c17ce67b02173d3ab6 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# USB Storage driver configuration
#
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index edcf2be0e0eb55fca9d89b488ed98903263406a8..395cf8fb58708c3e8d85b7f58a6a7e37e749fefd 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -167,6 +167,7 @@ static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
static void rio_karma_destructor(void *extra)
{
struct karma_data *data = (struct karma_data *) extra;
+
kfree(data->recv);
}
@@ -174,6 +175,7 @@ static int rio_karma_init(struct us_data *us)
{
int ret = 0;
struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
+
if (!data)
goto out;
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 30a847c2089d09cf87e39efca8de8367a5bcc27d..89d9193bd1cf8c26084f75749efd472c43630289 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
menuconfig TYPEC
tristate "USB Type-C Support"
diff --git a/drivers/usb/typec/altmodes/Kconfig b/drivers/usb/typec/altmodes/Kconfig
index efef2a64bc515bbdfc967cefba5e30950598dd78..ef2226eb7a3340cbeaef2f9fb84fca65c3e4315f 100644
--- a/drivers/usb/typec/altmodes/Kconfig
+++ b/drivers/usb/typec/altmodes/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
menu "USB Type-C Alternate Mode drivers"
diff --git a/drivers/usb/typec/altmodes/Makefile b/drivers/usb/typec/altmodes/Makefile
index 5caf094ef71aa164a35567f018829bfa8a4f273d..eda8456f1c92c63725895ef8190080e7b0532c1f 100644
--- a/drivers/usb/typec/altmodes/Makefile
+++ b/drivers/usb/typec/altmodes/Makefile
@@ -1,2 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
obj-$(CONFIG_TYPEC_DP_ALTMODE) += typec_displayport.o
typec_displayport-y := displayport.o
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 3f06e94771a72d0fe5bff46244af063d96cc8cb8..610d790bc9be1fbe31e23731795a4baad24a3036 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -24,10 +24,6 @@ enum {
DP_CONF_DUAL_D,
};
-/* Helper for setting/getting the pin assignement value to the configuration */
-#define DP_CONF_SET_PIN_ASSIGN(_a_) ((_a_) << 8)
-#define DP_CONF_GET_PIN_ASSIGN(_conf_) (((_conf_) & GENMASK(15, 8)) >> 8)
-
/* Pin assignments that use USB3.1 Gen2 signaling to carry DP protocol */
#define DP_PIN_ASSIGN_GEN2_BR_MASK (BIT(DP_PIN_ASSIGN_A) | \
BIT(DP_PIN_ASSIGN_B))
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index 5db0593ca0bdf66c097ed0de862448980010192a..2eb6238418475182792c385ab80f74d2c9d03d47 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -9,6 +9,7 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include "bus.h"
@@ -204,15 +205,32 @@ static void typec_altmode_put_partner(struct altmode *altmode)
put_device(&adev->dev);
}
-static int __typec_port_match(struct device *dev, const void *name)
+static int typec_port_fwnode_match(struct device *dev, const void *fwnode)
+{
+ return dev_fwnode(dev) == fwnode;
+}
+
+static int typec_port_name_match(struct device *dev, const void *name)
{
return !strcmp((const char *)name, dev_name(dev));
}
static void *typec_port_match(struct device_connection *con, int ep, void *data)
{
- return class_find_device(typec_class, NULL, con->endpoint[ep],
- __typec_port_match);
+ struct device *dev;
+
+ /*
+ * FIXME: Check does the fwnode supports the requested SVID. If it does
+ * we need to return ERR_PTR(-PROBE_DEFER) when there is no device.
+ */
+ if (con->fwnode)
+ return class_find_device(typec_class, NULL, con->fwnode,
+ typec_port_fwnode_match);
+
+ dev = class_find_device(typec_class, NULL, con->endpoint[ep],
+ typec_port_name_match);
+
+ return dev ? dev : ERR_PTR(-EPROBE_DEFER);
}
struct typec_altmode *
@@ -277,7 +295,7 @@ void typec_altmode_update_active(struct typec_altmode *adev, bool active)
if (adev->active == active)
return;
- if (!is_typec_port(adev->dev.parent)) {
+ if (!is_typec_port(adev->dev.parent) && adev->dev.driver) {
if (!active)
module_put(adev->dev.driver->owner);
else
@@ -1496,11 +1514,8 @@ typec_port_register_altmode(struct typec_port *port,
{
struct typec_altmode *adev;
struct typec_mux *mux;
- char id[10];
-
- sprintf(id, "id%04xm%02x", desc->svid, desc->mode);
- mux = typec_mux_get(&port->dev, id);
+ mux = typec_mux_get(&port->dev, desc);
if (IS_ERR(mux))
return ERR_CAST(mux);
@@ -1593,7 +1608,7 @@ struct typec_port *typec_register_port(struct device *parent,
return ERR_CAST(port->sw);
}
- port->mux = typec_mux_get(&port->dev, "typec-mux");
+ port->mux = typec_mux_get(&port->dev, NULL);
if (IS_ERR(port->mux)) {
put_device(&port->dev);
return ERR_CAST(port->mux);
diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index d990aa510fabf008a332706c34fe3f61b2929e82..2ce54f3fc79c3af74094baebe073060c98e07f49 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -11,6 +11,8 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/slab.h>
#include <linux/usb/typec_mux.h>
static DEFINE_MUTEX(switch_lock);
@@ -23,15 +25,25 @@ static void *typec_switch_match(struct device_connection *con, int ep,
{
struct typec_switch *sw;
- list_for_each_entry(sw, &switch_list, entry)
- if (!strcmp(con->endpoint[ep], dev_name(sw->dev)))
- return sw;
+ if (!con->fwnode) {
+ list_for_each_entry(sw, &switch_list, entry)
+ if (!strcmp(con->endpoint[ep], dev_name(sw->dev)))
+ return sw;
+ return ERR_PTR(-EPROBE_DEFER);
+ }
/*
- * We only get called if a connection was found, tell the caller to
- * wait for the switch to show up.
+ * With OF graph the mux node must have a boolean device property named
+ * "orientation-switch".
*/
- return ERR_PTR(-EPROBE_DEFER);
+ if (con->id && !fwnode_property_present(con->fwnode, con->id))
+ return NULL;
+
+ list_for_each_entry(sw, &switch_list, entry)
+ if (dev_fwnode(sw->dev) == con->fwnode)
+ return sw;
+
+ return con->id ? ERR_PTR(-EPROBE_DEFER) : NULL;
}
/**
@@ -48,7 +60,7 @@ struct typec_switch *typec_switch_get(struct device *dev)
struct typec_switch *sw;
mutex_lock(&switch_lock);
- sw = device_connection_find_match(dev, "typec-switch", NULL,
+ sw = device_connection_find_match(dev, "orientation-switch", NULL,
typec_switch_match);
if (!IS_ERR_OR_NULL(sw)) {
WARN_ON(!try_module_get(sw->dev->driver->owner));
@@ -112,35 +124,87 @@ EXPORT_SYMBOL_GPL(typec_switch_unregister);
static void *typec_mux_match(struct device_connection *con, int ep, void *data)
{
+ const struct typec_altmode_desc *desc = data;
struct typec_mux *mux;
+ int nval;
+ bool match;
+ u16 *val;
+ int i;
- list_for_each_entry(mux, &mux_list, entry)
- if (!strcmp(con->endpoint[ep], dev_name(mux->dev)))
- return mux;
+ if (!con->fwnode) {
+ list_for_each_entry(mux, &mux_list, entry)
+ if (!strcmp(con->endpoint[ep], dev_name(mux->dev)))
+ return mux;
+ return ERR_PTR(-EPROBE_DEFER);
+ }
/*
- * We only get called if a connection was found, tell the caller to
- * wait for the switch to show up.
+ * Check has the identifier already been "consumed". If it
+ * has, no need to do any extra connection identification.
*/
+ match = !con->id;
+ if (match)
+ goto find_mux;
+
+ /* Accessory Mode muxes */
+ if (!desc) {
+ match = fwnode_property_present(con->fwnode, "accessory");
+ if (match)
+ goto find_mux;
+ return NULL;
+ }
+
+ /* Alternate Mode muxes */
+ nval = fwnode_property_read_u16_array(con->fwnode, "svid", NULL, 0);
+ if (nval <= 0)
+ return NULL;
+
+ val = kcalloc(nval, sizeof(*val), GFP_KERNEL);
+ if (!val)
+ return ERR_PTR(-ENOMEM);
+
+ nval = fwnode_property_read_u16_array(con->fwnode, "svid", val, nval);
+ if (nval < 0) {
+ kfree(val);
+ return ERR_PTR(nval);
+ }
+
+ for (i = 0; i < nval; i++) {
+ match = val[i] == desc->svid;
+ if (match) {
+ kfree(val);
+ goto find_mux;
+ }
+ }
+ kfree(val);
+ return NULL;
+
+find_mux:
+ list_for_each_entry(mux, &mux_list, entry)
+ if (dev_fwnode(mux->dev) == con->fwnode)
+ return mux;
+
return ERR_PTR(-EPROBE_DEFER);
}
/**
* typec_mux_get - Find USB Type-C Multiplexer
* @dev: The caller device
- * @name: Mux identifier
+ * @desc: Alt Mode description
*
* Finds a mux linked to the caller. This function is primarily meant for the
* Type-C drivers. Returns a reference to the mux on success, NULL if no
* matching connection was found, or ERR_PTR(-EPROBE_DEFER) when a connection
* was found but the mux has not been enumerated yet.
*/
-struct typec_mux *typec_mux_get(struct device *dev, const char *name)
+struct typec_mux *typec_mux_get(struct device *dev,
+ const struct typec_altmode_desc *desc)
{
struct typec_mux *mux;
mutex_lock(&mux_lock);
- mux = device_connection_find_match(dev, name, NULL, typec_mux_match);
+ mux = device_connection_find_match(dev, "mode-switch", (void *)desc,
+ typec_mux_match);
if (!IS_ERR_OR_NULL(mux)) {
WARN_ON(!try_module_get(mux->dev->driver->owner));
get_device(mux->dev);
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index 9a954d2b8d8f73c4dd7f46d2bdea722630c4444b..01ed0d5e10e8cb7a04524ec151a8b55ea7984744 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
menu "USB Type-C Multiplexer/DeMultiplexer Switch support"
config TYPEC_MUX_PI3USB30532
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index f03ea8a61768666d4faa0652434e7113523bdd40..72481bbb2af39a79cda097ae164bb5e96111471b 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config TYPEC_TCPM
tristate "USB Type-C Port Controller Manager"
depends on USB
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index f1c39a3c753434666b033e1ab47fb1033b5fd259..0f62db091d8dab59416fb70af97a44a127503d05 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -4435,66 +4435,6 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
return 0;
}
-int tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo,
- unsigned int nr_pdo)
-{
- if (tcpm_validate_caps(port, pdo, nr_pdo))
- return -EINVAL;
-
- mutex_lock(&port->lock);
- port->nr_src_pdo = tcpm_copy_pdos(port->src_pdo, pdo, nr_pdo);
- switch (port->state) {
- case SRC_UNATTACHED:
- case SRC_ATTACH_WAIT:
- case SRC_TRYWAIT:
- tcpm_set_cc(port, tcpm_rp_cc(port));
- break;
- case SRC_SEND_CAPABILITIES:
- case SRC_NEGOTIATE_CAPABILITIES:
- case SRC_READY:
- case SRC_WAIT_NEW_CAPABILITIES:
- tcpm_set_cc(port, tcpm_rp_cc(port));
- tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0);
- break;
- default:
- break;
- }
- mutex_unlock(&port->lock);
- return 0;
-}
-EXPORT_SYMBOL_GPL(tcpm_update_source_capabilities);
-
-int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo,
- unsigned int nr_pdo,
- unsigned int operating_snk_mw)
-{
- if (tcpm_validate_caps(port, pdo, nr_pdo))
- return -EINVAL;
-
- mutex_lock(&port->lock);
- port->nr_snk_pdo = tcpm_copy_pdos(port->snk_pdo, pdo, nr_pdo);
- port->operating_snk_mw = operating_snk_mw;
- port->update_sink_caps = true;
-
- switch (port->state) {
- case SNK_NEGOTIATE_CAPABILITIES:
- case SNK_NEGOTIATE_PPS_CAPABILITIES:
- case SNK_READY:
- case SNK_TRANSITION_SINK:
- case SNK_TRANSITION_SINK_VBUS:
- if (port->pps_data.active)
- tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0);
- else
- tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0);
- break;
- default:
- break;
- }
- mutex_unlock(&port->lock);
- return 0;
-}
-EXPORT_SYMBOL_GPL(tcpm_update_sink_capabilities);
-
/* Power Supply access to expose source power information */
enum tcpm_psy_online_states {
TCPM_PSY_OFFLINE = 0,
@@ -4811,12 +4751,12 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
err = devm_tcpm_psy_register(port);
if (err)
- goto out_destroy_wq;
+ goto out_role_sw_put;
port->typec_port = typec_register_port(port->dev, &port->typec_caps);
if (IS_ERR(port->typec_port)) {
err = PTR_ERR(port->typec_port);
- goto out_destroy_wq;
+ goto out_role_sw_put;
}
if (tcpc->config && tcpc->config->alt_modes) {
@@ -4849,8 +4789,10 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
tcpm_log(port, "%s: registered", dev_name(dev));
return port;
-out_destroy_wq:
+out_role_sw_put:
usb_role_switch_put(port->role_sw);
+out_destroy_wq:
+ tcpm_debugfs_exit(port);
destroy_workqueue(port->wq);
return ERR_PTR(err);
}
diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c
index 1c0033ad87382d6c28742719bc17f341dc56ea85..c674abe3cf99dcb8283d96de7fa90549373c335b 100644
--- a/drivers/usb/typec/tps6598x.c
+++ b/drivers/usb/typec/tps6598x.c
@@ -14,6 +14,8 @@
#include <linux/usb/typec.h>
/* Register offsets */
+#define TPS_REG_VID 0x00
+#define TPS_REG_MODE 0x03
#define TPS_REG_CMD1 0x08
#define TPS_REG_DATA1 0x09
#define TPS_REG_INT_EVENT1 0x14
@@ -66,6 +68,20 @@ struct tps6598x_rx_identity_reg {
#define TPS_TASK_TIMEOUT 1
#define TPS_TASK_REJECTED 3
+enum {
+ TPS_MODE_APP,
+ TPS_MODE_BOOT,
+ TPS_MODE_BIST,
+ TPS_MODE_DISC,
+};
+
+static const char *const modes[] = {
+ [TPS_MODE_APP] = "APP ",
+ [TPS_MODE_BOOT] = "BOOT",
+ [TPS_MODE_BIST] = "BIST",
+ [TPS_MODE_DISC] = "DISC",
+};
+
/* Unrecognized commands will be replaced with "!CMD" */
#define INVALID_CMD(_cmd_) (_cmd_ == 0x444d4321)
@@ -110,6 +126,20 @@ tps6598x_block_read(struct tps6598x *tps, u8 reg, void *val, size_t len)
return 0;
}
+static int tps6598x_block_write(struct tps6598x *tps, u8 reg,
+ void *val, size_t len)
+{
+ u8 data[TPS_MAX_LEN + 1];
+
+ if (!tps->i2c_protocol)
+ return regmap_raw_write(tps->regmap, reg, val, len);
+
+ data[0] = len;
+ memcpy(&data[1], val, len);
+
+ return regmap_raw_write(tps->regmap, reg, data, sizeof(data));
+}
+
static inline int tps6598x_read16(struct tps6598x *tps, u8 reg, u16 *val)
{
return tps6598x_block_read(tps, reg, val, sizeof(u16));
@@ -127,23 +157,23 @@ static inline int tps6598x_read64(struct tps6598x *tps, u8 reg, u64 *val)
static inline int tps6598x_write16(struct tps6598x *tps, u8 reg, u16 val)
{
- return regmap_raw_write(tps->regmap, reg, &val, sizeof(u16));
+ return tps6598x_block_write(tps, reg, &val, sizeof(u16));
}
static inline int tps6598x_write32(struct tps6598x *tps, u8 reg, u32 val)
{
- return regmap_raw_write(tps->regmap, reg, &val, sizeof(u32));
+ return tps6598x_block_write(tps, reg, &val, sizeof(u32));
}
static inline int tps6598x_write64(struct tps6598x *tps, u8 reg, u64 val)
{
- return regmap_raw_write(tps->regmap, reg, &val, sizeof(u64));
+ return tps6598x_block_write(tps, reg, &val, sizeof(u64));
}
static inline int
tps6598x_write_4cc(struct tps6598x *tps, u8 reg, const char *val)
{
- return regmap_raw_write(tps->regmap, reg, &val, sizeof(u32));
+ return tps6598x_block_write(tps, reg, &val, sizeof(u32));
}
static int tps6598x_read_partner_identity(struct tps6598x *tps)
@@ -229,8 +259,8 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
return -EBUSY;
if (in_len) {
- ret = regmap_raw_write(tps->regmap, TPS_REG_DATA1,
- in_data, in_len);
+ ret = tps6598x_block_write(tps, TPS_REG_DATA1,
+ in_data, in_len);
if (ret)
return ret;
}
@@ -384,6 +414,32 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
return IRQ_HANDLED;
}
+static int tps6598x_check_mode(struct tps6598x *tps)
+{
+ char mode[5] = { };
+ int ret;
+
+ ret = tps6598x_read32(tps, TPS_REG_MODE, (void *)mode);
+ if (ret)
+ return ret;
+
+ switch (match_string(modes, ARRAY_SIZE(modes), mode)) {
+ case TPS_MODE_APP:
+ return 0;
+ case TPS_MODE_BOOT:
+ dev_warn(tps->dev, "dead-battery condition\n");
+ return 0;
+ case TPS_MODE_BIST:
+ case TPS_MODE_DISC:
+ default:
+ dev_err(tps->dev, "controller in unsupported mode \"%s\"\n",
+ mode);
+ break;
+ }
+
+ return -ENODEV;
+}
+
static const struct regmap_config tps6598x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -409,10 +465,8 @@ static int tps6598x_probe(struct i2c_client *client)
if (IS_ERR(tps->regmap))
return PTR_ERR(tps->regmap);
- ret = tps6598x_read32(tps, 0, &vid);
- if (ret < 0)
- return ret;
- if (!vid)
+ ret = tps6598x_read32(tps, TPS_REG_VID, &vid);
+ if (ret < 0 || !vid)
return -ENODEV;
/*
@@ -425,6 +479,11 @@ static int tps6598x_probe(struct i2c_client *client)
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
tps->i2c_protocol = true;
+ /* Make sure the controller has application firmware running */
+ ret = tps6598x_check_mode(tps);
+ if (ret)
+ return ret;
+
ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
if (ret < 0)
return ret;
diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
index 78118883f96c8ffdf868a4474ba569be59857865..15c2ac7db02d54b789e8a27f4c2b9e2e4078155b 100644
--- a/drivers/usb/typec/ucsi/Kconfig
+++ b/drivers/usb/typec/ucsi/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config TYPEC_UCSI
tristate "USB Type-C Connector System Software Interface driver"
depends on !CPU_BIG_ENDIAN
diff --git a/drivers/usb/typec/ucsi/debug.h b/drivers/usb/typec/ucsi/debug.h
deleted file mode 100644
index fdeff39df12078d979cfaa76202fd1c4832b4069..0000000000000000000000000000000000000000
--- a/drivers/usb/typec/ucsi/debug.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __UCSI_DEBUG_H
-#define __UCSI_DEBUG_H
-
-#include "ucsi.h"
-
-static const char * const ucsi_cmd_strs[] = {
- [0] = "Unknown command",
- [UCSI_PPM_RESET] = "PPM_RESET",
- [UCSI_CANCEL] = "CANCEL",
- [UCSI_CONNECTOR_RESET] = "CONNECTOR_RESET",
- [UCSI_ACK_CC_CI] = "ACK_CC_CI",
- [UCSI_SET_NOTIFICATION_ENABLE] = "SET_NOTIFICATION_ENABLE",
- [UCSI_GET_CAPABILITY] = "GET_CAPABILITY",
- [UCSI_GET_CONNECTOR_CAPABILITY] = "GET_CONNECTOR_CAPABILITY",
- [UCSI_SET_UOM] = "SET_UOM",
- [UCSI_SET_UOR] = "SET_UOR",
- [UCSI_SET_PDM] = "SET_PDM",
- [UCSI_SET_PDR] = "SET_PDR",
- [UCSI_GET_ALTERNATE_MODES] = "GET_ALTERNATE_MODES",
- [UCSI_GET_CAM_SUPPORTED] = "GET_CAM_SUPPORTED",
- [UCSI_GET_CURRENT_CAM] = "GET_CURRENT_CAM",
- [UCSI_SET_NEW_CAM] = "SET_NEW_CAM",
- [UCSI_GET_PDOS] = "GET_PDOS",
- [UCSI_GET_CABLE_PROPERTY] = "GET_CABLE_PROPERTY",
- [UCSI_GET_CONNECTOR_STATUS] = "GET_CONNECTOR_STATUS",
- [UCSI_GET_ERROR_STATUS] = "GET_ERROR_STATUS",
-};
-
-static inline const char *ucsi_cmd_str(u64 raw_cmd)
-{
- u8 cmd = raw_cmd & GENMASK(7, 0);
-
- return ucsi_cmd_strs[(cmd >= ARRAY_SIZE(ucsi_cmd_strs)) ? 0 : cmd];
-}
-
-static const char * const ucsi_ack_strs[] = {
- [0] = "",
- [UCSI_ACK_EVENT] = "event",
- [UCSI_ACK_CMD] = "command",
-};
-
-static inline const char *ucsi_ack_str(u8 ack)
-{
- return ucsi_ack_strs[(ack >= ARRAY_SIZE(ucsi_ack_strs)) ? 0 : ack];
-}
-
-static inline const char *ucsi_cci_str(u32 cci)
-{
- if (cci & GENMASK(7, 0)) {
- if (cci & BIT(29))
- return "Event pending (ACK completed)";
- if (cci & BIT(31))
- return "Event pending (command completed)";
- return "Connector Change";
- }
- if (cci & BIT(29))
- return "ACK completed";
- if (cci & BIT(31))
- return "Command completed";
-
- return "";
-}
-
-#endif /* __UCSI_DEBUG_H */
diff --git a/drivers/usb/typec/ucsi/trace.c b/drivers/usb/typec/ucsi/trace.c
index d9a6ff6e673cb25dfb9d3222cf9c38060d7352da..ffa3b4c3f3389f353d8dd102d9cbe6c3dcdd07a4 100644
--- a/drivers/usb/typec/ucsi/trace.c
+++ b/drivers/usb/typec/ucsi/trace.c
@@ -1,3 +1,62 @@
// SPDX-License-Identifier: GPL-2.0
#define CREATE_TRACE_POINTS
+#include "ucsi.h"
#include "trace.h"
+
+static const char * const ucsi_cmd_strs[] = {
+ [0] = "Unknown command",
+ [UCSI_PPM_RESET] = "PPM_RESET",
+ [UCSI_CANCEL] = "CANCEL",
+ [UCSI_CONNECTOR_RESET] = "CONNECTOR_RESET",
+ [UCSI_ACK_CC_CI] = "ACK_CC_CI",
+ [UCSI_SET_NOTIFICATION_ENABLE] = "SET_NOTIFICATION_ENABLE",
+ [UCSI_GET_CAPABILITY] = "GET_CAPABILITY",
+ [UCSI_GET_CONNECTOR_CAPABILITY] = "GET_CONNECTOR_CAPABILITY",
+ [UCSI_SET_UOM] = "SET_UOM",
+ [UCSI_SET_UOR] = "SET_UOR",
+ [UCSI_SET_PDM] = "SET_PDM",
+ [UCSI_SET_PDR] = "SET_PDR",
+ [UCSI_GET_ALTERNATE_MODES] = "GET_ALTERNATE_MODES",
+ [UCSI_GET_CAM_SUPPORTED] = "GET_CAM_SUPPORTED",
+ [UCSI_GET_CURRENT_CAM] = "GET_CURRENT_CAM",
+ [UCSI_SET_NEW_CAM] = "SET_NEW_CAM",
+ [UCSI_GET_PDOS] = "GET_PDOS",
+ [UCSI_GET_CABLE_PROPERTY] = "GET_CABLE_PROPERTY",
+ [UCSI_GET_CONNECTOR_STATUS] = "GET_CONNECTOR_STATUS",
+ [UCSI_GET_ERROR_STATUS] = "GET_ERROR_STATUS",
+};
+
+const char *ucsi_cmd_str(u64 raw_cmd)
+{
+ u8 cmd = raw_cmd & GENMASK(7, 0);
+
+ return ucsi_cmd_strs[(cmd >= ARRAY_SIZE(ucsi_cmd_strs)) ? 0 : cmd];
+}
+
+static const char * const ucsi_ack_strs[] = {
+ [0] = "",
+ [UCSI_ACK_EVENT] = "event",
+ [UCSI_ACK_CMD] = "command",
+};
+
+const char *ucsi_ack_str(u8 ack)
+{
+ return ucsi_ack_strs[(ack >= ARRAY_SIZE(ucsi_ack_strs)) ? 0 : ack];
+}
+
+const char *ucsi_cci_str(u32 cci)
+{
+ if (cci & GENMASK(7, 0)) {
+ if (cci & BIT(29))
+ return "Event pending (ACK completed)";
+ if (cci & BIT(31))
+ return "Event pending (command completed)";
+ return "Connector Change";
+ }
+ if (cci & BIT(29))
+ return "ACK completed";
+ if (cci & BIT(31))
+ return "Command completed";
+
+ return "";
+}
diff --git a/drivers/usb/typec/ucsi/trace.h b/drivers/usb/typec/ucsi/trace.h
index d5092446ecc6f6739b5c21bb94d51196f63a9e4d..5e2906df2db77a952e654b32db1cad7391ce86d7 100644
--- a/drivers/usb/typec/ucsi/trace.h
+++ b/drivers/usb/typec/ucsi/trace.h
@@ -7,8 +7,11 @@
#define __UCSI_TRACE_H
#include <linux/tracepoint.h>
-#include "ucsi.h"
-#include "debug.h"
+
+const char *ucsi_cmd_str(u64 raw_cmd);
+const char *ucsi_ack_str(u8 ack);
+const char *ucsi_cci_str(u32 cci);
+const char *ucsi_recipient_str(u8 recipient);
DECLARE_EVENT_CLASS(ucsi_log_ack,
TP_PROTO(u8 ack),
diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig
index a20b65cb6678f99821d17990cf873b9dbc6b58f5..2f86b28fa3da64a4f15017895fe5e85abbbcbeee 100644
--- a/drivers/usb/usbip/Kconfig
+++ b/drivers/usb/usbip/Kconfig
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
config USBIP_CORE
tristate "USB/IP support"
depends on NET
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 1e592ec94ba49d19ba457af7274cc71c9779ea35..f46ee1fefe02224dce6f425bab2f3eb6bbc7680d 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -702,8 +702,10 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag
}
vdev = &vhci_hcd->vdev[portnum-1];
- /* patch to usb_sg_init() is in 2.5.60 */
- BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
+ if (!urb->transfer_buffer && urb->transfer_buffer_length) {
+ dev_dbg(dev, "Null URB transfer buffer\n");
+ return -EINVAL;
+ }
spin_lock_irqsave(&vhci->lock, flags);
diff --git a/drivers/usb/usbip/vudc_dev.c b/drivers/usb/usbip/vudc_dev.c
index 1634d8698e151133ebcec50991cbc46657f4d3e4..a72c17ff1c6a163c8e0b3b9439a188536adb472f 100644
--- a/drivers/usb/usbip/vudc_dev.c
+++ b/drivers/usb/usbip/vudc_dev.c
@@ -297,7 +297,8 @@ static void vep_free_request(struct usb_ep *_ep, struct usb_request *_req)
{
struct vrequest *req;
- if (WARN_ON(!_ep || !_req))
+ /* ep is always valid here - see usb_ep_free_request() */
+ if (!_req)
return;
req = to_vrequest(_req);
diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig
index 348de1d6726ecef0fba6cda0f614417e131ed085..12e89189ca7dc9d7482822c9a1ce5858ac59a777 100644
--- a/drivers/usb/wusbcore/Kconfig
+++ b/drivers/usb/wusbcore/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
#
# Wireless USB Core configuration
#
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
index 222228c5c1e17aaf36edd8d485281439778eb1b1..af77064c74569addc4badd9959661471c589760d 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -302,10 +302,8 @@ static ssize_t cbaf_wusb_chid_show(struct device *dev,
{
struct usb_interface *iface = to_usb_interface(dev);
struct cbaf *cbaf = usb_get_intfdata(iface);
- char pr_chid[WUSB_CKHDID_STRSIZE];
- ckhdid_printf(pr_chid, sizeof(pr_chid), &cbaf->chid);
- return scnprintf(buf, PAGE_SIZE, "%s\n", pr_chid);
+ return sprintf(buf, "%16ph\n", cbaf->chid.data);
}
static ssize_t cbaf_wusb_chid_store(struct device *dev,
@@ -415,10 +413,8 @@ static ssize_t cbaf_wusb_cdid_show(struct device *dev,
{
struct usb_interface *iface = to_usb_interface(dev);
struct cbaf *cbaf = usb_get_intfdata(iface);
- char pr_cdid[WUSB_CKHDID_STRSIZE];
- ckhdid_printf(pr_cdid, sizeof(pr_cdid), &cbaf->cdid);
- return scnprintf(buf, PAGE_SIZE, "%s\n", pr_cdid);
+ return sprintf(buf, "%16ph\n", cbaf->cdid.data);
}
static ssize_t cbaf_wusb_cdid_store(struct device *dev,
@@ -503,7 +499,6 @@ static int cbaf_cc_upload(struct cbaf *cbaf)
int result;
struct device *dev = &cbaf->usb_iface->dev;
struct wusb_cbaf_cc_data *ccd;
- char pr_cdid[WUSB_CKHDID_STRSIZE];
ccd = cbaf->buffer;
*ccd = cbaf_cc_data_defaults;
@@ -513,10 +508,8 @@ static int cbaf_cc_upload(struct cbaf *cbaf)
ccd->BandGroups = cpu_to_le16(cbaf->host_band_groups);
dev_dbg(dev, "Trying to upload CC:\n");
- ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CHID);
- dev_dbg(dev, " CHID %s\n", pr_cdid);
- ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CDID);
- dev_dbg(dev, " CDID %s\n", pr_cdid);
+ dev_dbg(dev, " CHID %16ph\n", ccd->CHID.data);
+ dev_dbg(dev, " CDID %16ph\n", ccd->CDID.data);
dev_dbg(dev, " Bandgroups 0x%04x\n", cbaf->host_band_groups);
result = usb_control_msg(
diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/usb/wusbcore/dev-sysfs.c
index 85a1acf3a729bf2936658b22660ace7abff65c57..67b0a4c412b2dcbb69e76f64203eeb37b93bd208 100644
--- a/drivers/usb/wusbcore/dev-sysfs.c
+++ b/drivers/usb/wusbcore/dev-sysfs.c
@@ -50,10 +50,9 @@ static ssize_t wusb_cdid_show(struct device *dev,
wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev));
if (wusb_dev == NULL)
return -ENODEV;
- result = ckhdid_printf(buf, PAGE_SIZE, &wusb_dev->cdid);
- strcat(buf, "\n");
+ result = sprintf(buf, "%16ph\n", wusb_dev->cdid.data);
wusb_dev_put(wusb_dev);
- return result + 1;
+ return result;
}
static DEVICE_ATTR_RO(wusb_cdid);
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index fcb06aef26755aadefff7b023273c9fd73daa8f8..a93837d57d53bd04eec7882a2976b26625f5956c 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -532,7 +532,7 @@ static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc,
}
dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr);
- ckhdid_printf(pr_cdid, sizeof(pr_cdid), &dnc->CDID);
+ sprintf(pr_cdid, "%16ph", dnc->CDID.data);
dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n",
pr_cdid,
wusb_dn_connect_prev_dev_addr(dnc),
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 01f2f21830c0e93887d95aa5bde38261b63d5883..abf88cea37bba5ee2d526131a4059ffe5bfbb239 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -662,9 +662,9 @@ static void __wa_setup_isoc_packet_descr(
/* populate isoc packet descriptor. */
packet_desc->bPacketType = WA_XFER_ISO_PACKET_INFO;
- packet_desc->wLength = cpu_to_le16(sizeof(*packet_desc) +
- (sizeof(packet_desc->PacketLength[0]) *
- seg->isoc_frame_count));
+ packet_desc->wLength = cpu_to_le16(struct_size(packet_desc,
+ PacketLength,
+ seg->isoc_frame_count));
for (frame_index = 0; frame_index < seg->isoc_frame_count;
++frame_index) {
int offset_index = frame_index + seg->isoc_frame_offset;
@@ -2438,7 +2438,7 @@ static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb)
struct wa_rpipe *rpipe;
unsigned done = 0, dti_busy = 0, data_frame_count = 0, seg_index;
unsigned first_frame_index = 0, rpipe_ready = 0;
- int expected_size;
+ size_t expected_size;
/* We have a xfer result buffer; check it */
dev_dbg(dev, "DTI: isoc packet status %d bytes at %p\n",
@@ -2460,11 +2460,10 @@ static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb)
goto error_bad_seg;
seg = xfer->seg[wa->dti_isoc_xfer_seg];
rpipe = xfer->ep->hcpriv;
- expected_size = sizeof(*packet_status) +
- (sizeof(packet_status->PacketStatus[0]) *
- seg->isoc_frame_count);
+ expected_size = struct_size(packet_status, PacketStatus,
+ seg->isoc_frame_count);
if (urb->actual_length != expected_size) {
- dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %d needed)\n",
+ dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %zu needed)\n",
urb->actual_length, expected_size);
goto error_bad_seg;
}
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index e5ba6140c1baf6291b672042c224c241750d4d04..d0b404d258e868b9396302ecde04c80eef643735 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -80,17 +80,13 @@ static ssize_t wusb_chid_show(struct device *dev,
{
struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
const struct wusb_ckhdid *chid;
- ssize_t result = 0;
if (wusbhc->wuie_host_info != NULL)
chid = &wusbhc->wuie_host_info->CHID;
else
chid = &wusb_ckhdid_zero;
- result += ckhdid_printf(buf, PAGE_SIZE, chid);
- result += sprintf(buf + result, "\n");
-
- return result;
+ return sprintf(buf, "%16ph\n", chid->data);
}
/*
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index 1d2a939cfcf8e6e935ae8f2c2c89804b95b66bce..ed993e36347296abd6c9fde4cbf2c0c3a57ccdc7 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -125,9 +125,8 @@ static struct uwb_ie_drp *uwb_drp_ie_alloc(void)
{
struct uwb_ie_drp *drp_ie;
- drp_ie = kzalloc(sizeof(struct uwb_ie_drp) +
- UWB_NUM_ZONES * sizeof(struct uwb_drp_alloc),
- GFP_KERNEL);
+ drp_ie = kzalloc(struct_size(drp_ie, allocs, UWB_NUM_ZONES),
+ GFP_KERNEL);
if (drp_ie)
drp_ie->hdr.element_id = UWB_IE_DRP;
return drp_ie;
diff --git a/include/linux/device.h b/include/linux/device.h
index 928e899ccbfbece2dcbdfe65cfd1ec66f7530a2e..54b586105179bc8293ac7a78d989a1f933e59ee8 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -758,11 +758,17 @@ struct device_dma_parameters {
/**
* struct device_connection - Device Connection Descriptor
+ * @fwnode: The device node of the connected device
* @endpoint: The names of the two devices connected together
* @id: Unique identifier for the connection
* @list: List head, private, for internal use only
+ *
+ * NOTE: @fwnode is not used together with @endpoint. @fwnode is used when
+ * platform firmware defines the connection. When the connection is registered
+ * with device_connection_add() @endpoint is used instead.
*/
struct device_connection {
+ struct fwnode_handle *fwnode;
const char *endpoint[2];
const char *id;
struct list_head list;
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 60cef8227534077aedcee9bdc39cf163bb325e59..5da56a674f2f987f26f9d84984d33140e1c7d9f1 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -98,10 +98,11 @@ struct fsl_usb2_platform_data {
unsigned suspended:1;
unsigned already_suspended:1;
- unsigned has_fsl_erratum_a007792:1;
- unsigned has_fsl_erratum_a005275:1;
+ unsigned has_fsl_erratum_a007792:1;
+ unsigned has_fsl_erratum_14:1;
+ unsigned has_fsl_erratum_a005275:1;
unsigned has_fsl_erratum_a005697:1;
- unsigned check_phy_clk_valid:1;
+ unsigned check_phy_clk_valid:1;
/* register save area for suspend/resume */
u32 pm_command;
diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h
index c08aacc0ac35970b07dbb527c157420e79d35a02..a877ffee845deb4f25dfa45a492c513caa383b65 100644
--- a/include/linux/phy/phy-mipi-dphy.h
+++ b/include/linux/phy/phy-mipi-dphy.h
@@ -6,8 +6,6 @@
#ifndef __PHY_MIPI_DPHY_H_
#define __PHY_MIPI_DPHY_H_
-#include <video/videomode.h>
-
/**
* struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
*
@@ -192,10 +190,10 @@ struct phy_configure_opts_mipi_dphy {
/**
* @init:
*
- * Time, in picoseconds for the initialization period to
+ * Time, in microseconds for the initialization period to
* complete.
*
- * Minimum value: 100000000 ps
+ * Minimum value: 100 us
*/
unsigned int init;
@@ -246,11 +244,11 @@ struct phy_configure_opts_mipi_dphy {
/**
* @wakeup:
*
- * Time, in picoseconds, that a transmitter drives a Mark-1
+ * Time, in microseconds, that a transmitter drives a Mark-1
* state prior to a Stop state in order to initiate an exit
* from ULPS.
*
- * Minimum value: 1000000000 ps
+ * Minimum value: 1000 us
*/
unsigned int wakeup;
@@ -271,7 +269,8 @@ struct phy_configure_opts_mipi_dphy {
/**
* @lanes:
*
- * Number of active data lanes used for the transmissions.
+ * Number of active, consecutive, data lanes, starting from
+ * lane 0, used for the transmissions.
*/
unsigned char lanes;
};
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 7dc3a411bece6ba8006d7405e0045f856da9c308..695931b03684d8677642a274864ab282b386a55d 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -72,6 +72,12 @@ struct giveback_urb_bh {
struct usb_host_endpoint *completing_ep;
};
+enum usb_dev_authorize_policy {
+ USB_DEVICE_AUTHORIZE_NONE = 0,
+ USB_DEVICE_AUTHORIZE_ALL = 1,
+ USB_DEVICE_AUTHORIZE_INTERNAL = 2,
+};
+
struct usb_hcd {
/*
@@ -117,7 +123,6 @@ struct usb_hcd {
#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
#define HCD_FLAG_DEAD 6 /* controller has died? */
#define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */
-#define HCD_FLAG_DEV_AUTHORIZED 8 /* authorize devices? */
/* The flags can be tested using these macros; they are likely to
* be slightly faster than test_bit().
@@ -142,8 +147,7 @@ struct usb_hcd {
* or they require explicit user space authorization; this bit is
* settable through /sys/class/usb_host/X/authorized_default
*/
-#define HCD_DEV_AUTHORIZED(hcd) \
- ((hcd)->flags & (1U << HCD_FLAG_DEV_AUTHORIZED))
+ enum usb_dev_authorize_policy dev_policy;
/* Flags that get set only during HCD registration or removal. */
unsigned rh_registered:1;/* is root hub registered? */
diff --git a/include/linux/usb/role.h b/include/linux/usb/role.h
index edc51be4a77c6d80b3ef5643ed4b4fb883368517..c05ffa6abda9f8250a84af7cd164ea381c5413c2 100644
--- a/include/linux/usb/role.h
+++ b/include/linux/usb/role.h
@@ -18,6 +18,7 @@ typedef enum usb_role (*usb_role_switch_get_t)(struct device *dev);
/**
* struct usb_role_switch_desc - USB Role Switch Descriptor
+ * @fwnode: The device node to be associated with the role switch
* @usb2_port: Optional reference to the host controller port device (USB2)
* @usb3_port: Optional reference to the host controller port device (USB3)
* @udc: Optional reference to the peripheral controller device
@@ -32,6 +33,7 @@ typedef enum usb_role (*usb_role_switch_get_t)(struct device *dev);
* usb_role_switch_register() before registering the switch.
*/
struct usb_role_switch_desc {
+ struct fwnode_handle *fwnode;
struct device *usb2_port;
struct device *usb3_port;
struct device *udc;
diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
index 50c74a77db55c435af06e83833ca1271c263d6fd..0c532ca3f07954cecb3b864da1507a7743b18c3f 100644
--- a/include/linux/usb/tcpm.h
+++ b/include/linux/usb/tcpm.h
@@ -159,12 +159,6 @@ struct tcpm_port;
struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc);
void tcpm_unregister_port(struct tcpm_port *port);
-int tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo,
- unsigned int nr_pdo);
-int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo,
- unsigned int nr_pdo,
- unsigned int operating_snk_mw);
-
void tcpm_vbus_change(struct tcpm_port *port);
void tcpm_cc_change(struct tcpm_port *port);
void tcpm_pd_receive(struct tcpm_port *port,
diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h
index 55ae781d60a9ea42423c97f39dcf69d73f12a769..7fa12ef8d09a45bfa1534d7edbe74a0f4d60a4f1 100644
--- a/include/linux/usb/typec_dp.h
+++ b/include/linux/usb/typec_dp.h
@@ -92,4 +92,8 @@ enum {
#define DP_CONF_PIN_ASSIGNEMENT_SHIFT 8
#define DP_CONF_PIN_ASSIGNEMENT_MASK GENMASK(15, 8)
+/* Helper for setting/getting the pin assignement value to the configuration */
+#define DP_CONF_SET_PIN_ASSIGN(_a_) ((_a_) << 8)
+#define DP_CONF_GET_PIN_ASSIGN(_conf_) (((_conf_) & GENMASK(15, 8)) >> 8)
+
#endif /* __USB_TYPEC_DP_H */
diff --git a/include/linux/usb/typec_mux.h b/include/linux/usb/typec_mux.h
index 79293f630ee12b52665ae0513dc5f9985f3584c3..43f40685e53c4c5a2c8545e31a1597da6517b061 100644
--- a/include/linux/usb/typec_mux.h
+++ b/include/linux/usb/typec_mux.h
@@ -47,7 +47,8 @@ void typec_switch_put(struct typec_switch *sw);
int typec_switch_register(struct typec_switch *sw);
void typec_switch_unregister(struct typec_switch *sw);
-struct typec_mux *typec_mux_get(struct device *dev, const char *name);
+struct typec_mux *
+typec_mux_get(struct device *dev, const struct typec_altmode_desc *desc);
void typec_mux_put(struct typec_mux *mux);
int typec_mux_register(struct typec_mux *mux);
void typec_mux_unregister(struct typec_mux *mux);
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
index 9e4a3213f2c2a57ba6a4a8b491f241e23917499e..65adee629106031af68d9bb5558a33c3481d182a 100644
--- a/include/linux/usb/wusb.h
+++ b/include/linux/usb/wusb.h
@@ -236,22 +236,6 @@ enum {
WUSB_TRUST_TIMEOUT_MS = 4000, /* [WUSB] section 4.15.1 */
};
-static inline size_t ckhdid_printf(char *pr_ckhdid, size_t size,
- const struct wusb_ckhdid *ckhdid)
-{
- return scnprintf(pr_ckhdid, size,
- "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx "
- "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx",
- ckhdid->data[0], ckhdid->data[1],
- ckhdid->data[2], ckhdid->data[3],
- ckhdid->data[4], ckhdid->data[5],
- ckhdid->data[6], ckhdid->data[7],
- ckhdid->data[8], ckhdid->data[9],
- ckhdid->data[10], ckhdid->data[11],
- ckhdid->data[12], ckhdid->data[13],
- ckhdid->data[14], ckhdid->data[15]);
-}
-
/*
* WUSB Crypto stuff (WUSB1.0[6])
*/