diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 2ce2fb7664bc60992f7f5eebbbed3fc57345ac9e..f56b1bd41f286cbfee6b81e85cd415ea68a4270f 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 613070e9ddbe068db1bc1b42bb17a21aac7b0120..f1eebcae9bf0b7e353b1a3cbabc091b386553960 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the turbostation come
+ * Interrupt setup and service. Interrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index c827a6097d024fda867cfff7365ea4da2ff31bc2..8d0baeceaaa317671d72a94db6561d7b0d9e781c 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -414,7 +414,7 @@ ks8695_tx_irq(int irq, void *dev_id)
* Interrupt Status Register (Offset 0xF208)
* Bit29: WAN MAC Receive Status
* Bit16: LAN MAC Receive Status
- * So, this Rx interrrupt enable/status bit number is equal
+ * So, this Rx interrupt enable/status bit number is equal
* as Rx IRQ number.
*/
static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 6f0e9403004b7f23dc23fe5a9650050386a62110..c346e65e51ef56d2fdd6223f127a6543c7444e57 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index fc50d4267df878d7f50165ca7b85a0da2553bc6a..99d31a7d6aaab6d04a64c529c55700a9d74562e9 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -5617,7 +5617,7 @@ struct l2_fhdr {
#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5712,7 +5712,7 @@ struct l2_fhdr {
#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TPAT_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5807,7 +5807,7 @@ struct l2_fhdr {
#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_RXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5953,7 +5953,7 @@ struct l2_fhdr {
#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_COM_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -6119,7 +6119,7 @@ struct l2_fhdr {
#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_CP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -6291,7 +6291,7 @@ struct l2_fhdr {
#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_MCP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 57339da76326eb504b4365a2716247c77af182ca..d7f879dfb1c91de033687bb50532933afbcff793 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2057,7 +2057,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- /* Force any delayed status interrrupt and NAPI */
+ /* Force any delayed status interrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 5efd578334897bbf451cc0ba33b17e060e50c089..c1ea65e5d036cfa1b4ae1a8a1f178281e8ad53de 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -488,7 +488,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct sk_buff *skb = NULL;
struct ieee80211_tx_info *info = NULL;
- int tid; /* should be int */
+ int tid;
if (!rtlpriv->rtlhal.earlymode_enable)
return;
@@ -1538,7 +1538,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw)
rtl_init_rx_config(hw);
- /*should after adapter start and interrupt enable. */
+ /*should be after adapter start and interrupt enable. */
set_hal_start(rtlhal);
RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
@@ -1559,7 +1559,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
u8 RFInProgressTimeOut = 0;
/*
- *should before disable interrrupt&adapter
+ *should be before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index a764bf99743b0b5c6be4d46fed2952cbca278d94..fbd9261a0c2c72ccb2560ee6f5c7134f051dd93f 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a06e2c27b43507c8bfb2ba4ed589f541bf1d51b2..ff4d40d77c30338f87043d8b6d4c98870ba1b51b 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2969,7 +2969,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
handle_port_change(dev);
}
- /* suspend interrrupt */
+ /* suspend interrupt */
if (irq_sts & STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
handle_bus_suspend(dev);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3dd40b4e675cd50787a04ac0850e8be18f14ca6c..a218a4de5dc90a25205104d8cb7d8de49fc7b773 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2481,7 +2481,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
- * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+ * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
* both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
* only indicates a change in the reset state).
*/
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b67a062f556bb65d56fead8404546dfcfb75f541..95a67fea393bf5e077cbf677ef3006fb3f73c178 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* most these gadgets, end of is signified either by a short packet,
* or filling the last byte of the buffer. (Sending extra data in
* that last pckate should trigger an overflow fault.) But in mode 1,
- * we don't get DMA completion interrrupt for short packets.
+ * we don't get DMA completion interrupt for short packets.
*
* Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
* to get endpoint interrupt on every DMA req, but that didn't seem