Skip to content
Snippets Groups Projects
tegra-common.h 4.2 KiB
Newer Older
  • Learn to ignore specific revisions
  • /*
     *  (C) Copyright 2010-2012
     *  NVIDIA Corporation <www.nvidia.com>
     *
    
     * SPDX-License-Identifier:	GPL-2.0+
    
    #ifndef _TEGRA_COMMON_H_
    #define _TEGRA_COMMON_H_
    
    #include <linux/sizes.h>
    
    #include <linux/stringify.h>
    
    /*
     * High Level Configuration Options
     */
    #define CONFIG_ARMCORTEXA9		/* This is an ARM V7 CPU core */
    #define CONFIG_SYS_L2CACHE_OFF		/* No L2 cache */
    
    #include <asm/arch/tegra.h>		/* get chip and board defs */
    
    
    #define CONFIG_SYS_TIMER_RATE		1000000
    #define CONFIG_SYS_TIMER_COUNTER	NV_PA_TMRUS_BASE
    
    
    /*
     * Display CPU and Board information
     */
    #define CONFIG_DISPLAY_CPUINFO
    #define CONFIG_DISPLAY_BOARDINFO
    
    #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
    
    /* Environment */
    #define CONFIG_ENV_VARS_UBOOT_CONFIG
    #define CONFIG_ENV_SIZE			0x2000	/* Total Size Environment */
    
    /*
     * Size of malloc() pool
     */
    #define CONFIG_SYS_MALLOC_LEN		(4 << 20)	/* 4MB  */
    
    
    #define CONFIG_SYS_NONCACHED_MEMORY	(1 << 20)       /* 1 MiB */
    
     * NS16550 Configuration
    
    #ifdef CONFIG_SPL_BUILD
    
    #define CONFIG_SYS_NS16550_SERIAL
    #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
    #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
    
    #else
    #define CONFIG_TEGRA_SERIAL
    #endif
    #define CONFIG_SYS_NS16550
    
    /*
     * Common HW configuration.
     * If this varies between SoCs later, move to tegraNN-common.h
     * Note: This is number of devices, not max device ID.
     */
    #define CONFIG_SYS_MMC_MAX_DEVICE 4
    
    
    /*
     * select serial console configuration
     */
    #define CONFIG_CONS_INDEX	1
    
    /* allow to overwrite serial and ethaddr */
    #define CONFIG_ENV_OVERWRITE
    #define CONFIG_BAUDRATE			115200
    
    /* include default commands */
    #include <config_cmd_default.h>
    
    /* remove unused commands */
    #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect */
    #undef CONFIG_CMD_FPGA		/* FPGA configuration support */
    #undef CONFIG_CMD_IMI
    #undef CONFIG_CMD_IMLS
    #undef CONFIG_CMD_NFS		/* NFS support */
    #undef CONFIG_CMD_NET		/* network support */
    
    /* turn on command-line edit/hist/auto */
    #define CONFIG_COMMAND_HISTORY
    
    
    /* turn on commonly used storage-related commands */
    #define CONFIG_PARTITION_UUIDS
    #define CONFIG_CMD_PART
    
    
    #define CONFIG_SYS_NO_FLASH
    
    #define CONFIG_CONSOLE_MUX
    #define CONFIG_SYS_CONSOLE_IS_IN_ENV
    
    /*
     * Miscellaneous configurable options
     */
    #define CONFIG_SYS_PROMPT		V_PROMPT
    /*
     * Increasing the size of the IO buffer as default nfsargs size is more
     *  than 256 and so it is not possible to edit it
     */
    #define CONFIG_SYS_CBSIZE		(256 * 2) /* Console I/O Buffer Size */
    /* Print Buffer Size */
    #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
    					sizeof(CONFIG_SYS_PROMPT) + 16)
    #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
    /* Boot Argument Buffer Size */
    #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
    
    #define CONFIG_SYS_MEMTEST_START	(NV_PA_SDRC_CS0 + 0x600000)
    #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
    
    
    #ifndef CONFIG_SPL_BUILD
    
    #define CONFIG_USE_ARCH_MEMCPY
    
    /*-----------------------------------------------------------------------
     * Physical Memory Map
     */
    #define CONFIG_NR_DRAM_BANKS	1
    #define PHYS_SDRAM_1		NV_PA_SDRC_CS0
    #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512M */
    
    #define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
    #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
    
    #define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* 256M */
    
    #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_STACKBASE
    #define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
    #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
    						CONFIG_SYS_INIT_RAM_SIZE - \
    						GENERATED_GBL_DATA_SIZE)
    
    #define CONFIG_TEGRA_GPIO
    #define CONFIG_CMD_GPIO
    #define CONFIG_CMD_ENTERRCM
    
    /* Defines for SPL */
    #define CONFIG_SPL_FRAMEWORK
    #define CONFIG_SPL_RAM_DEVICE
    #define CONFIG_SPL_BOARD_INIT
    #define CONFIG_SPL_NAND_SIMPLE
    
    #define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_TEXT_BASE - \
    
    						CONFIG_SPL_TEXT_BASE)
    #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00010000
    
    #define CONFIG_SPL_LIBCOMMON_SUPPORT
    #define CONFIG_SPL_LIBGENERIC_SUPPORT
    #define CONFIG_SPL_SERIAL_SUPPORT
    #define CONFIG_SPL_GPIO_SUPPORT
    
    
    #define CONFIG_SYS_GENERIC_BOARD
    
    #define CONFIG_BOARD_EARLY_INIT_F
    #define CONFIG_BOARD_LATE_INIT
    
    /* Misc utility code */
    #define CONFIG_BOUNCE_BUFFER
    
    #define CONFIG_CRC32_VERIFY
    
    #ifndef CONFIG_SPL_BUILD
    #include <config_distro_defaults.h>
    #endif
    
    
    #endif /* _TEGRA_COMMON_H_ */