board: sama5d3_xplained: Update to support DM/DT

Update the configuration files to support the device tree and driver
model, so do SPL. The device clock and pins configuration are handled
by the clock and the pinctrl drivers respectively.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Fix build error with sama5d3_xplained_mmc:
Signed-off-by: Simon Glass <sjg@chromium.org>

board/atmel/sama5d3_xplained/sama5d3_xplained.c

@@ -136,7 +136,9 @@ int board_mmc_init(bd_t *bis)
 void spl_board_init(void)
 {
 #ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_GENERIC_ATMEL_MCI
 	sama5d3_xplained_mci0_hw_init();
+#endif
 #elif CONFIG_SYS_USE_NANDFLASH
 	sama5d3_xplained_nand_hw_init();
 #endif

configs/sama5d3_xplained_mmc_defconfig

@@ -4,15 +4,19 @@ CONFIG_TARGET_SAMA5D3_XPLAINED=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y
+CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
@@ -29,6 +33,29 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y

configs/sama5d3_xplained_nandflash_defconfig

@@ -6,6 +6,9 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
@@ -27,6 +30,29 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y

include/configs/sama5d3_xplained.h

@@ -12,11 +12,6 @@
 
 #include "at91-sama5_common.h"
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_DBGU
-
 /*
  * This needs to be defined for the OHCI code to work but it is defined as
  * ATMEL_ID_UHPHS in the CPU specific header files.
@@ -34,10 +29,10 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x10000000
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x310000
+#define CONFIG_SYS_INIT_SP_ADDR		0x318000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 /* NAND flash */
@@ -67,21 +62,6 @@
 #define CONFIG_CMD_UBIFS
 #endif
 
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB_SEARCH_PHY
-#define CONFIG_RGMII
-#define CONFIG_PHYLIB
-
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_ATMEL_MCI_8BIT
-#endif
-
 /* USB */
 
 #ifdef CONFIG_CMD_USB
@@ -111,7 +91,7 @@
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
-#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_MAX_SIZE		0x18000
 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000