AT91: change common at91sam9261 files to compile with new scheme

Signed-off-by: Asen Dimov <dimov@ronetix.at>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c

@@ -23,77 +23,73 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
 
 void at91_serial0_hw_init(void)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTC, 8, 1);		/* TXD0 */
 	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);		/* RXD0 */
-	writel(1 << AT91SAM9261_ID_US0, &pmc->pcer);
+	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
 }
 
 void at91_serial1_hw_init(void)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTC, 12, 1);		/* TXD1 */
 	at91_set_a_periph(AT91_PIO_PORTC, 13, 0);		/* RXD1 */
-	writel(1 << AT91SAM9261_ID_US1, &pmc->pcer);
+	writel(1 << ATMEL_ID_USART1, &pmc->pcer);
 }
 
 void at91_serial2_hw_init(void)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTC, 14, 1);		/* TXD2 */
 	at91_set_a_periph(AT91_PIO_PORTC, 15, 0);		/* RXD2 */
-	writel(1 << AT91SAM9261_ID_US2, &pmc->pcer);
+	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
 }
 
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTA, 9, 0);		/* DRXD */
 	at91_set_a_periph(AT91_PIO_PORTA, 10, 1);		/* DTXD */
-	writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
-	at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
-	at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
-	at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3	/* DBGU */
-	at91_serial3_hw_init();
-#endif
+	writel(1 << ATMEL_ID_SYS, &pmc->pcer);
 }
 
-#ifdef CONFIG_HAS_DATAFLASH
+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
 void at91_spi0_hw_init(unsigned long cs_mask)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
-	at91_set_a_periph(AT91_PIO_PORTA, 0, 0);	/* SPI0_MISO */
-	at91_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* SPI0_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTA, 2, 0);	/* SPI0_SPCK */
+	at91_set_a_periph(AT91_PIO_PORTA, 0, PUP);	/* SPI0_MISO */
+	at91_set_a_periph(AT91_PIO_PORTA, 1, PUP);	/* SPI0_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTA, 2, PUP);	/* SPI0_SPCK */
 
 	/* Enable clock */
-	writel(1 << AT91SAM9261_ID_SPI0, &pmc->pcer);
+	writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
 
 	if (cs_mask & (1 << 0)) {
 		at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
@@ -123,14 +119,14 @@ void at91_spi0_hw_init(unsigned long cs_mask)
 
 void at91_spi1_hw_init(unsigned long cs_mask)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
-	at91_set_a_periph(AT91_PIO_PORTB, 30, 0);	/* SPI1_MISO */
-	at91_set_a_periph(AT91_PIO_PORTB, 31, 0);	/* SPI1_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTB, 29, 0);	/* SPI1_SPCK */
+	at91_set_a_periph(AT91_PIO_PORTB, 30, PUP);	/* SPI1_MISO */
+	at91_set_a_periph(AT91_PIO_PORTB, 31, PUP);	/* SPI1_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTB, 29, PUP);	/* SPI1_SPCK */
 
 	/* Enable clock */
-	writel(1 << AT91SAM9261_ID_SPI1, &pmc->pcer);
+	writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
 
 	if (cs_mask & (1 << 0)) {
 		at91_set_a_periph(AT91_PIO_PORTB, 28, 1);

arch/arm/include/asm/arch-at91/at91sam9261.h

@@ -104,7 +104,7 @@
 #define ATMEL_SIZE_SRAM		0x00028000	/* Internal SRAM size (160Kb) */
 
 #define ATMEL_BASE_ROM		0x00400000	/* Internal ROM base address */
-#define ATMEL_SIZE_ROM		SZ_32K		/* Internal ROM size (32Kb) */
+#define ATMEL_SIZE_ROM		0x00008000	/* Internal ROM size (32Kb) */
 
 #define ATMEL_BASE_UHP		0x00500000	/* USB Host controller */
 #define ATMEL_BASE_LCDC		0x00600000	/* LDC controller */
@@ -125,6 +125,7 @@
  * Other misc defines
  */
 #define ATMEL_PIO_PORTS		3		/* theese SoCs have 3 PIO */
+#define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
 #define ATMEL_BASE_PIO		ATMEL_BASE_PIOA
 
 /*