malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LEN

The default value of CONFIG_SYS_MALLOC_F_LEN is defined by ./Kconfig as 0x400. Each defconfig or Kconfig need not repeat the same value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>

malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LEN
91405b7f · Masahiro Yamada · Tom Rini · 6eb6f132 · 91405b7f · 91405b7f
Commit 91405b7f authored 10 years ago by Masahiro Yamada Committed by Tom Rini 9 years ago
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -83,9 +83,6 @@ config DM_GPIO
 config SYS_MALLOC_F
 	default y

-config SYS_MALLOC_F_LEN
-	default 0x400
-
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
 source "board/samsung/universal_c210/Kconfig"

--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -109,9 +109,6 @@ config DM_SERIAL
 config SYS_MALLOC_F
 	default y if DM

-config SYS_MALLOC_F_LEN
-	default 0x400 if DM
-
 config SYS_SOC
 	default "omap3"


--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -48,9 +48,6 @@ endchoice
 config SYS_MALLOC_F
 	default y

-config SYS_MALLOC_F_LEN
-	default 0x400
-
 config CMD_PINMON
 	bool "Enable boot mode pins monitor command"
 	default y

--- a/board/amcc/canyonlands/Kconfig
+++ b/board/amcc/canyonlands/Kconfig
@@ -43,8 +43,4 @@ config SYS_MALLOC_F
 	bool
 	default y

-config SYS_MALLOC_F_LEN
-	hex
-	default 0x400
-
 endif
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -50,7 +50,4 @@ config DM_SERIAL
 config SYS_MALLOC_F
 	default y if DM

-config SYS_MALLOC_F_LEN
-	default 0x400 if DM
-
 endif
--- a/configs/Linksprite_pcDuino3_fdt_defconfig
+++ b/configs/Linksprite_pcDuino3_fdt_defconfig
@@ -14,4 +14,3 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=122
 CONFIG_DRAM_EMR1=4
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/am335x_igep0033_defconfig
+++ b/configs/am335x_igep0033_defconfig
@@ -4,4 +4,3 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_ARM=y
 CONFIG_TARGET_AM335X_IGEP0033=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -6,4 +6,3 @@ CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/cm_t335_defconfig
+++ b/configs/cm_t335_defconfig
@@ -2,4 +2,3 @@ CONFIG_SPL=y
 CONFIG_ARM=y
 CONFIG_TARGET_CM_T335=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/gwventana_defconfig
+++ b/configs/gwventana_defconfig
@@ -3,4 +3,3 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 CONFIG_ARM=y
 CONFIG_TARGET_GW_VENTANA=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/mx6dlsabreauto_defconfig
+++ b/configs/mx6dlsabreauto_defconfig
@@ -2,6 +2,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
--- a/configs/mx6qsabreauto_defconfig
+++ b/configs/mx6qsabreauto_defconfig
@@ -2,6 +2,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
--- a/configs/mx6qsabresd_defconfig
+++ b/configs/mx6qsabresd_defconfig
@@ -2,6 +2,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SABRESD=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -2,6 +2,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,M
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SXSABRESD=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -5,4 +5,3 @@ CONFIG_DM=n
 CONFIG_DM_SERIAL=n
 CONFIG_DM_GPIO=n
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/pcm051_rev1_defconfig
+++ b/configs/pcm051_rev1_defconfig
@@ -3,4 +3,3 @@ CONFIG_SYS_EXTRA_OPTIONS="REV1"
 CONFIG_ARM=y
 CONFIG_TARGET_PCM051=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/pcm051_rev3_defconfig
+++ b/configs/pcm051_rev3_defconfig
@@ -3,4 +3,3 @@ CONFIG_SYS_EXTRA_OPTIONS="REV3"
 CONFIG_ARM=y
 CONFIG_TARGET_PCM051=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/pengwyn_defconfig
+++ b/configs/pengwyn_defconfig
@@ -2,4 +2,3 @@ CONFIG_SPL=y
 CONFIG_ARM=y
 CONFIG_TARGET_PENGWYN=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/pepper_defconfig
+++ b/configs/pepper_defconfig
@@ -2,4 +2,3 @@ CONFIG_SPL=y
 CONFIG_ARM=y
 CONFIG_TARGET_PEPPER=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
 CONFIG_ARM=y
 CONFIG_TARGET_RPI_2=y
 CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x400