Convert CONFIG_SYS_WHITE_ON_BLACK to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_WHITE_ON_BLACK

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Make this default y on various SoCs]
Signed-off-by: Tom Rini <trini@konsulko.com>

README

@@ -1638,9 +1638,6 @@ The following options need to be configured:
 
 			320x240. Black & white.
 
-		Normally display is black on white background; define
-		CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
-
 		CONFIG_LCD_ALIGNMENT
 
 		Normally the LCD is page-aligned (typically 4KB). If this is

configs/brppt1_mmc_defconfig

@@ -55,5 +55,6 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_STORAGE=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_LCD=y
 CONFIG_OF_LIBFDT=y

configs/brppt1_nand_defconfig

@@ -55,5 +55,6 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_STORAGE=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_LCD=y
 CONFIG_OF_LIBFDT=y

configs/brppt1_spi_defconfig

@@ -63,5 +63,6 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_STORAGE=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_LCD=y
 CONFIG_OF_LIBFDT=y

configs/brxre1_defconfig

@@ -55,6 +55,7 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_STORAGE=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_LCD=y
 CONFIG_OF_LIBFDT=y
 # CONFIG_EFI_LOADER is not set

configs/rpi_2_defconfig

@@ -19,6 +19,7 @@ CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_LCD=y
 CONFIG_PHYS_TO_BUS=y

configs/rpi_3_32b_defconfig

@@ -21,6 +21,7 @@ CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_LCD=y
 CONFIG_PHYS_TO_BUS=y

configs/rpi_3_defconfig

@@ -21,6 +21,7 @@ CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_LCD=y
 CONFIG_PHYS_TO_BUS=y

configs/rpi_defconfig

@@ -19,6 +19,7 @@ CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_LCD=y
 CONFIG_PHYS_TO_BUS=y

drivers/video/Kconfig

@@ -89,6 +89,15 @@ config CONSOLE_TRUETYPE_SIZE
 	  method to select the display's physical size, which would allow
 	  U-Boot to calculate the correct font size.
 
+config SYS_WHITE_ON_BLACK
+	bool "Display console as white on a black background"
+	default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || TEGRA || X86
+	help
+	 Normally the display is black on a white background, Enable this
+	 option to invert this, i.e. white on a black background. This can be
+	 better in low-light situations or to reduce eye strain in some
+	 cases.
+
 source "drivers/video/fonts/Kconfig"
 
 config VIDCONSOLE_AS_LCD

include/configs/at91sam9261ek.h

@@ -51,7 +51,6 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_LCD
 #ifdef CONFIG_AT91SAM9261EK
 #define CONFIG_ATMEL_LCD_BGR555

include/configs/at91sam9263ek.h

@@ -59,7 +59,6 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK	1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_BGR555		1
 

include/configs/at91sam9m10g45ek.h

@@ -44,7 +44,6 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_LCD
 #define CONFIG_ATMEL_LCD_RGB565
 /* board specific(not enough SRAM) */

include/configs/at91sam9n12ek.h

@@ -42,7 +42,6 @@
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
 

include/configs/at91sam9rlek.h

@@ -47,7 +47,6 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK	1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_RGB565		1
 /* Let board_init_f handle the framebuffer allocation */

include/configs/at91sam9x5ek.h

@@ -39,7 +39,6 @@
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
 

include/configs/brppt1.h

@@ -18,7 +18,6 @@
 #define CONFIG_AM335X_LCD
 #define CONFIG_LCD_ROTATION
 #define CONFIG_LCD_DT_SIMPLEFB
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define LCD_BPP				LCD_COLOR32
 
 #define CONFIG_HW_WATCHDOG

include/configs/brxre1.h

@@ -17,7 +17,6 @@
 /* ------------------------------------------------------------------------- */
 #define CONFIG_AM335X_LCD
 #define CONFIG_LCD_NOSTDOUT
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define LCD_BPP				LCD_COLOR32
 
 #define CONFIG_VIDEO_BMP_GZIP

include/configs/colibri_pxa270.h

@@ -65,7 +65,6 @@
 #ifdef CONFIG_LCD
 #define CONFIG_PXA_LCD
 #define CONFIG_PXA_VGA
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_LCD_LOGO
 #endif
 

include/configs/colibri_t20.h

@@ -39,7 +39,6 @@
 #define CONFIG_TFTP_TSIZE
 
 /* LCD support */
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_LCD_LOGO
 
 /* NAND support */