arm: imx: common rework cache settings for imx6

Rework cache settings for imx6, move cache configuration
to imx-common/cache.c so it can be reused for newer SoC

Signed-off-by: Adrian Alonso <aalonso@freescale.com>

arch/arm/cpu/armv7/mx6/soc.c

@@ -8,9 +8,6 @@
  */
 
 #include <common.h>
-#include <asm/armv7.h>
-#include <asm/bootm.h>
-#include <asm/pl310.h>
 #include <asm/errno.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
@@ -440,31 +437,6 @@ int board_postclk_init(void)
 	return 0;
 }
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
-#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
-	enum dcache_option option = DCACHE_WRITETHROUGH;
-#else
-	enum dcache_option option = DCACHE_WRITEBACK;
-#endif
-
-	/* Avoid random hang when download by usb */
-	invalidate_dcache_all();
-
-	/* Enable D-cache. I-cache is already enabled in start.S */
-	dcache_enable();
-
-	/* Enable caching on OCRAM and ROM */
-	mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
-					ROMCP_ARB_END_ADDR,
-					option);
-	mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
-					IRAM_SIZE,
-					option);
-}
-#endif
-
 #if defined(CONFIG_FEC_MXC)
 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 {
@@ -605,70 +577,3 @@ void imx_setup_hdmi(void)
 	writel(reg, &mxc_ccm->chsccdr);
 }
 #endif
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002
-void v7_outer_cache_enable(void)
-{
-	struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
-	unsigned int val;
-
-
-	/*
-	 * Set bit 22 in the auxiliary control register. If this bit
-	 * is cleared, PL310 treats Normal Shared Non-cacheable
-	 * accesses as Cacheable no-allocate.
-	 */
-	setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
-
-#if defined CONFIG_MX6SL
-	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-	val = readl(&iomux->gpr[11]);
-	if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
-		/* L2 cache configured as OCRAM, reset it */
-		val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
-		writel(val, &iomux->gpr[11]);
-	}
-#endif
-
-	/* Must disable the L2 before changing the latency parameters */
-	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-
-	writel(0x132, &pl310->pl310_tag_latency_ctrl);
-	writel(0x132, &pl310->pl310_data_latency_ctrl);
-
-	val = readl(&pl310->pl310_prefetch_ctrl);
-
-	/* Turn on the L2 I/D prefetch */
-	val |= 0x30000000;
-
-	/*
-	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
-	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
-	 * But according to ARM PL310 errata: 752271
-	 * ID: 752271: Double linefill feature can cause data corruption
-	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
-	 * Workaround: The only workaround to this erratum is to disable the
-	 * double linefill feature. This is the default behavior.
-	 */
-
-#ifndef CONFIG_MX6Q
-	val |= 0x40800000;
-#endif
-	writel(val, &pl310->pl310_prefetch_ctrl);
-
-	val = readl(&pl310->pl310_power_ctrl);
-	val |= L2X0_DYNAMIC_CLK_GATING_EN;
-	val |= L2X0_STNDBY_MODE_EN;
-	writel(val, &pl310->pl310_power_ctrl);
-
-	setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-}
-
-void v7_outer_cache_disable(void)
-{
-	struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
-
-	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-}
-#endif /* !CONFIG_SYS_L2CACHE_OFF */

arch/arm/imx-common/Makefile

@@ -19,6 +19,7 @@ obj-y	+= misc.o
 obj-$(CONFIG_SPL_BUILD)	+= spl.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6))
+obj-y 	+= cache.o
 obj-$(CONFIG_CMD_SATA) += sata.o
 obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
 endif

arch/arm/imx-common/cache.c

+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/pl310.h>
+#include <asm/io.h>
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+	enum dcache_option option = DCACHE_WRITETHROUGH;
+#else
+	enum dcache_option option = DCACHE_WRITEBACK;
+#endif
+	/* Avoid random hang when download by usb */
+	invalidate_dcache_all();
+
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+
+	/* Enable caching on OCRAM and ROM */
+	mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
+					ROMCP_ARB_END_ADDR,
+					option);
+	mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
+					IRAM_SIZE,
+					option);
+}
+#endif
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#ifdef CONFIG_SYS_L2_PL310
+#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002
+void v7_outer_cache_enable(void)
+{
+	struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+	unsigned int val;
+
+
+	/*
+	 * Set bit 22 in the auxiliary control register. If this bit
+	 * is cleared, PL310 treats Normal Shared Non-cacheable
+	 * accesses as Cacheable no-allocate.
+	 */
+	setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
+
+#if defined CONFIG_MX6SL
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	val = readl(&iomux->gpr[11]);
+	if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
+		/* L2 cache configured as OCRAM, reset it */
+		val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
+		writel(val, &iomux->gpr[11]);
+	}
+#endif
+
+	/* Must disable the L2 before changing the latency parameters */
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+
+	writel(0x132, &pl310->pl310_tag_latency_ctrl);
+	writel(0x132, &pl310->pl310_data_latency_ctrl);
+
+	val = readl(&pl310->pl310_prefetch_ctrl);
+
+	/* Turn on the L2 I/D prefetch */
+	val |= 0x30000000;
+
+	/*
+	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
+	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
+	 * But according to ARM PL310 errata: 752271
+	 * ID: 752271: Double linefill feature can cause data corruption
+	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
+	 * Workaround: The only workaround to this erratum is to disable the
+	 * double linefill feature. This is the default behavior.
+	 */
+
+#ifndef CONFIG_MX6Q
+	val |= 0x40800000;
+#endif
+	writel(val, &pl310->pl310_prefetch_ctrl);
+
+	val = readl(&pl310->pl310_power_ctrl);
+	val |= L2X0_DYNAMIC_CLK_GATING_EN;
+	val |= L2X0_STNDBY_MODE_EN;
+	writel(val, &pl310->pl310_power_ctrl);
+
+	setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+
+void v7_outer_cache_disable(void)
+{
+	struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+#endif /* !CONFIG_SYS_L2_PL310 */
+#endif /* !CONFIG_SYS_L2CACHE_OFF */