phy: ti-pipe3: Use TRM recommended settings for SATA DPLL

The AM572x Technical Reference Manual, SPRUHZ6H,
Revised November 2016 [1], shows recommended settings for the
SATA DPLL in Table 26-8. DPLL CLKDCOLDO Recommended Settings.

Use those settings in the driver. The TRM does not show
a value for 20MHz SYS_CLK so we use something close to the
26MHz setting.

[1] - http://www.ti.com/lit/ug/spruhz6h/spruhz6h.pdf



Signed-off-by: Roger Quadros <rogerq@ti.com>