disk: convert CONFIG_DOS_PARTITION to Kconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

arch/arm/include/asm/arch-ls102xa/config.h

@@ -89,8 +89,6 @@
 #define CONFIG_SYS_SCSI_MAX_LUN		1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_DOS_PARTITION
-
 #ifdef CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)

cmd/reiser.c

@@ -18,7 +18,7 @@
 #include <reiserfs.h>
 #include <part.h>
 
-#ifndef CONFIG_DOS_PARTITION
+#if !CONFIG_IS_ENABLED(DOS_PARTITION)
 #error DOS partition support must be selected
 #endif
 

cmd/zfs.c

@@ -24,7 +24,7 @@
 #include <usb.h>
 #endif
 
-#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
+#if !CONFIG_IS_ENABLED(DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
 #error DOS or EFI partition support must be selected
 #endif
 

common/fb_mmc.c

@@ -133,7 +133,7 @@ void fb_mmc_flash_write(const char *cmd, void *download_buffer,
 	}
 #endif
 
-#ifdef CONFIG_DOS_PARTITION
+#if CONFIG_IS_ENABLED(DOS_PARTITION)
 	if (strcmp(cmd, CONFIG_FASTBOOT_MBR_NAME) == 0) {
 		printf("%s: updating MBR\n", __func__);
 		if (is_valid_dos_buf(download_buffer)) {

configs/A10-OLinuXino-Lime_defconfig

@@ -14,6 +14,7 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

configs/A10s-OLinuXino-M_defconfig

@@ -14,5 +14,6 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/A13-OLinuXinoM_defconfig

@@ -17,5 +17,6 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_SUNXI_NO_PMIC=y
 CONFIG_USB_EHCI_HCD=y

configs/A13-OLinuXino_defconfig

@@ -22,6 +22,7 @@ CONFIG_SPL=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_DFU_RAM=y
 CONFIG_AXP_ALDO3_VOLT=3300
 CONFIG_USB_EHCI_HCD=y

configs/A20-OLinuXino-Lime2_defconfig

@@ -16,6 +16,7 @@ CONFIG_SPL=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_DFU_RAM=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y

configs/A20-OLinuXino-Lime_defconfig

@@ -12,6 +12,7 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800

configs/A20-OLinuXino_MICRO_defconfig

@@ -15,6 +15,7 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800

configs/A20-Olimex-SOM-EVB_defconfig

@@ -17,6 +17,7 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800

configs/A33-OLinuXino_defconfig

@@ -19,5 +19,6 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y

configs/Ainol_AW1_defconfig

@@ -18,4 +18,5 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_USB_MUSB_HOST=y

configs/Ampe_A76_defconfig

@@ -20,4 +20,5 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_USB_MUSB_HOST=y

configs/Auxtek-T003_defconfig

@@ -12,5 +12,6 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/Auxtek-T004_defconfig

@@ -10,5 +10,6 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/Bananapi_defconfig

@@ -13,6 +13,7 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y

configs/Bananapro_defconfig

@@ -15,6 +15,7 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO4_VOLT=2500

configs/C29XPCIE_NAND_defconfig

@@ -25,6 +25,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_DOS_PARTITION=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y