cmd: move CMD_PXE to Kconfig

Currently, CMD_PXE is forcibly enabled in config_distro_defaults.h, so that general purpose distributions can rely on it being defined. This header is included, under conditions or not, by various archs or famillies of archs / SoCs. However, it is very possible that boards based on those SoCs will not have a physical ethernet connector at all, even if the have a MAC; for example, the Nanopi Neo AIR (sunxi H3) does not. It is also possible that network booting is absolutely not necessary for a device. However, it is not possible to disable the PXE command, as it is forcibly enabled and is non-configurable. But it turns out we already have a config option to build a distro-ready image, in the name of DISTRO_DEFAULTS. Move CMD_PXE out of the hard-coded config_distro_defaults.h into a Kconfig option, that gets selected by DISTRO_DEFAULTS when it is set. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Joe Hershberger <joe.hershberger@ni.com> [trini: Make it select MENU, run moveconfig.py] Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: move CMD_PXE to Kconfig
bfb380b3 · Yann E. MORIN · Tom Rini · 3337e3af · bfb380b3 · bfb380b3
Commit bfb380b3 authored 8 years ago by Yann E. MORIN Committed by Tom Rini 8 years ago
--- a/Kconfig
+++ b/Kconfig
@@ -61,6 +61,7 @@ config DISTRO_DEFAULTS
 	select CMD_BOOTZ if ARM && !ARM64
 	select CMD_BOOTI if ARM64
 	select CMD_DHCP
+	select CMD_PXE
 	select CMD_EXT2
 	select CMD_EXT4
 	select CMD_FAT

--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -524,6 +524,12 @@ config CMD_DHCP
 	help
 	  Boot image via network using DHCP/TFTP protocol

+config CMD_PXE
+	bool "pxe"
+	select MENU
+	help
+	  Boot image via network using PXE protocol
+
 config CMD_NFS
 	bool "nfs"
 	default y

--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@@ -16,6 +16,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -17,6 +17,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@@ -30,6 +30,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -16,6 +16,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@@ -19,6 +19,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -30,6 +30,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@@ -31,6 +31,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -13,6 +13,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -12,6 +12,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y

--- a/include/config_distro_defaults.h
+++ b/include/config_distro_defaults.h
@@ -20,8 +20,6 @@
 #define CONFIG_BOOTP_PXE
 #define CONFIG_BOOTP_SUBNETMASK

-#define CONFIG_CMD_PXE
-
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_LONGHELP

--- a/include/configs/am335x_shc.h
+++ b/include/configs/am335x_shc.h
@@ -21,7 +21,6 @@
 #undef CONFIG_CMD_EXT4_WRITE
 #undef CONFIG_CMD_MMC_SPI
 #undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_PXE

 #define CONFIG_CMD_CACHE


--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -145,7 +145,6 @@

 /* Command line configuration */
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_PXE

 /*  MMC  */
 #define CONFIG_MMC

--- a/include/configs/s32v234evb.h
+++ b/include/configs/s32v234evb.h
@@ -214,7 +214,6 @@

 #if 0
 /* Configure PXE */
-#define CONFIG_CMD_PXE
 #define CONFIG_BOOTP_PXE
 #define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
 #endif

--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -127,7 +127,6 @@

 /*#define CONFIG_MENU_SHOW*/
 #define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_PXE
 #define CONFIG_CMD_ENV
 #define CONFIG_DOS_PARTITION


--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -80,9 +80,6 @@
 #endif
 #define CONFIG_AUTO_COMPLETE

-/* PXE */
-#define CONFIG_CMD_PXE
-
 #if defined(CONFIG_ZYNQ_SDHCI)
 # define CONFIG_MMC
 # define CONFIG_GENERIC_MMC