usb: s3c-otg: Rename struct s3c_plat_otg_data

The driver is actually for the Designware DWC2 controller.
This patch is the first to rename global symbol, the struct
s3c_plat_otg_data.

The rename is done automatically:
	$ sed -i "s/s3c_plat_otg_data/dwc2_plat_otg_data/g" \
		`git grep s3c_plat_otg_data | cut -d : -f 1`

Signed-off-by: Marek Vasut <marex@denx.de>

board/altera/arria5-socdk/socfpga.c

@@ -68,7 +68,7 @@ int board_phy_config(struct phy_device *phydev)
 #endif
 
 #ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
 	.regs_otg	= CONFIG_USB_DWC2_REG_ADDR,
 	.usb_gusbcfg	= 0x1417,
 };

board/altera/cyclone5-socdk/socfpga.c

@@ -68,7 +68,7 @@ int board_phy_config(struct phy_device *phydev)
 #endif
 
 #ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
 	.regs_otg	= CONFIG_USB_DWC2_REG_ADDR,
 	.usb_gusbcfg	= 0x1417,
 };

board/broadcom/bcm28155_ap/bcm28155_ap.c

@@ -95,7 +95,7 @@ int board_mmc_init(bd_t *bis)
 #endif
 
 #ifdef CONFIG_USB_GADGET
-static struct s3c_plat_otg_data bcm_otg_data = {
+static struct dwc2_plat_otg_data bcm_otg_data = {
 	.regs_otg	= HSOTG_BASE_ADDR
 };
 

board/denx/mcvevk/socfpga.c

@@ -28,7 +28,7 @@ int board_init(void)
 }
 
 #ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
 	.regs_otg	= CONFIG_USB_DWC2_REG_ADDR,
 	.usb_gusbcfg	= 0x1417,
 };

board/ebv/socrates/socfpga.c

@@ -68,7 +68,7 @@ int board_phy_config(struct phy_device *phydev)
 #endif
 
 #ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
 	.regs_otg	= CONFIG_USB_DWC2_REG_ADDR,
 	.usb_gusbcfg	= 0x1417,
 };

board/samsung/goni/goni.c

@@ -183,7 +183,7 @@ static int s5pc1xx_phy_control(int on)
 	return 0;
 }
 
-struct s3c_plat_otg_data s5pc110_otg_data = {
+struct dwc2_plat_otg_data s5pc110_otg_data = {
 	.phy_control = s5pc1xx_phy_control,
 	.regs_phy = S5PC110_PHY_BASE,
 	.regs_otg = S5PC110_OTG_BASE,

board/samsung/odroid/odroid.c

@@ -452,7 +452,7 @@ static int s5pc210_phy_control(int on)
 		return regulator_set_mode(dev, OPMODE_LPM);
 }
 
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
 	.phy_control	= s5pc210_phy_control,
 	.regs_phy	= EXYNOS4X12_USBPHY_BASE,
 	.regs_otg	= EXYNOS4X12_USBOTG_BASE,

board/samsung/trats/trats.c

@@ -41,7 +41,7 @@ u32 get_board_rev(void)
 #endif
 
 static void check_hw_revision(void);
-struct s3c_plat_otg_data s5pc210_otg_data;
+struct dwc2_plat_otg_data s5pc210_otg_data;
 
 int exynos_init(void)
 {
@@ -419,7 +419,7 @@ static int s5pc210_phy_control(int on)
 	return 0;
 }
 
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
 	.phy_control	= s5pc210_phy_control,
 	.regs_phy	= EXYNOS4_USBPHY_BASE,
 	.regs_otg	= EXYNOS4_USBOTG_BASE,

board/samsung/trats2/trats2.c

@@ -303,7 +303,7 @@ static int s5pc210_phy_control(int on)
 	return 0;
 }
 
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
 	.phy_control	= s5pc210_phy_control,
 	.regs_phy	= EXYNOS4X12_USBPHY_BASE,
 	.regs_otg	= EXYNOS4X12_USBOTG_BASE,

board/samsung/universal_c210/universal.c

@@ -179,7 +179,7 @@ static int s5pc210_phy_control(int on)
 	return 0;
 }
 
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
 	.phy_control = s5pc210_phy_control,
 	.regs_phy = EXYNOS4_USBPHY_BASE,
 	.regs_otg = EXYNOS4_USBOTG_BASE,

board/terasic/sockit/socfpga.c

@@ -68,7 +68,7 @@ int board_phy_config(struct phy_device *phydev)
 #endif
 
 #ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
 	.regs_otg	= CONFIG_USB_DWC2_REG_ADDR,
 	.usb_gusbcfg	= 0x1417,
 };

drivers/usb/gadget/dwc2_udc_otg.c

@@ -797,7 +797,7 @@ static struct dwc2_udc memory = {
  *	probe - binds to the platform device
  */
 
-int s3c_udc_probe(struct s3c_plat_otg_data *pdata)
+int s3c_udc_probe(struct dwc2_plat_otg_data *pdata)
 {
 	struct dwc2_udc *dev = &memory;
 	int retval = 0;

drivers/usb/gadget/dwc2_udc_otg_priv.h

@@ -78,7 +78,7 @@ struct dwc2_udc {
 	struct usb_gadget gadget;
 	struct usb_gadget_driver *driver;
 
-	struct s3c_plat_otg_data *pdata;
+	struct dwc2_plat_otg_data *pdata;
 
 	int ep0state;
 	struct dwc2_ep ep[DWC2_MAX_ENDPOINTS];

include/usb/s3c_udc.h

@@ -11,7 +11,7 @@
 
 #define PHY0_SLEEP              (1 << 5)
 
-struct s3c_plat_otg_data {
+struct dwc2_plat_otg_data {
 	int		(*phy_control)(int on);
 	unsigned int	regs_phy;
 	unsigned int	regs_otg;
@@ -20,6 +20,6 @@ struct s3c_plat_otg_data {
 	unsigned int	usb_gusbcfg;
 };
 
-int s3c_udc_probe(struct s3c_plat_otg_data *pdata);
+int s3c_udc_probe(struct dwc2_plat_otg_data *pdata);
 
 #endif