Skip to content
Snippets Groups Projects
Commit c175f306 authored by Tom Rini's avatar Tom Rini
Browse files
parents a7b00a7b a811492e
No related branches found
No related tags found
No related merge requests found
......@@ -13,6 +13,7 @@ SECTIONS
.text : {
*(.__text_start)
*(.__image_copy_start)
arch/arc/lib/start.o (.text*)
*(.text*)
}
......
......@@ -4,6 +4,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
extra-y = start.o
head-y := start.o
obj-y += cache.o
obj-y += cpu.o
obj-y += interrupts.o
......@@ -18,7 +20,6 @@ obj-y += memcpy-700.o
obj-y += memset.o
obj-y += reset.o
obj-y += timer.o
obj-y += start.o
obj-y += ints_low.o
obj-y += init_helpers.o
......
......@@ -9,6 +9,7 @@
#include <malloc.h>
#include <netdev.h>
#include <phy.h>
#include "axs10x.h"
DECLARE_GLOBAL_DATA_PTR;
......@@ -42,3 +43,16 @@ int board_eth_init(bd_t *bis)
return 0;
}
#define AXS_MB_CREG 0xE0011000
int board_early_init_f(void)
{
if (readl((void __iomem *)AXS_MB_CREG + 0x234) & (1 << 28))
gd->board_type = AXS_MB_V3;
else
gd->board_type = AXS_MB_V2;
return 0;
}
/*
* Copyright (C) 2015 Synopsys, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _BOARD_SYNOPSYS_AXS10X_H
#define _BOARD_SYNOPSYS_AXS10X_H
enum {
AXS_MB_V2,
AXS_MB_V3
};
#endif /* _BOARD_SYNOPSYS_AXS10X_H */
......@@ -9,6 +9,9 @@
#include <malloc.h>
#include <nand.h>
#include <asm/io.h>
#include "axs10x.h"
DECLARE_GLOBAL_DATA_PTR;
#define BUS_WIDTH 8 /* AXI data bus width in bytes */
......@@ -232,5 +235,9 @@ int board_nand_init(struct nand_chip *nand)
nand->write_buf = axs101_nand_write_buf;
nand->read_buf = axs101_nand_read_buf;
/* MBv3 has NAND IC with 16-bit data bus */
if (gd->board_type == AXS_MB_V3)
nand->options |= NAND_BUSWIDTH_16;
return 0;
}
......@@ -33,6 +33,12 @@
#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */
#define CONFIG_SYS_LOAD_ADDR 0x82000000
/*
* This board might be of different versions so handle it
*/
#define CONFIG_BOARD_TYPES
#define CONFIG_BOARD_EARLY_INIT_F
/*
* NAND Flash configuration
*/
......
0% Loading or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment