- Oct 31, 2016
-
-
Vagrant Cascadian authored
Signed-off-by:
Vagrant Cascadian <vagrant@debian.org> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Adam Ford authored
The autodetect feature doesn't allow users to specify the device tree. This fix will make it only autodetect if 'fdtimage' is not defined. Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
Tom Rini <trini@konsulko.com>
-
Adam Ford authored
Not all networks have a DHCP server configured properly, so these scripts make it easier to boot in that scenario. Signed-off-by:
-
Adam Ford authored
The LCD isn't supported in U-Boot and the LCD is now configured in the device tree, so this code is pointless. V2: Eliminiate erroneous newline. Signed-off-by:
-
Nishanth Menon authored
Current logic for query of revision, board_name, config returns NULL. Users of these functions do a direct strncmp to compare. Unfortunately, as per conventions require two valid strings to compare against and the current implementation causes a crash when compared with NULL. We'd still like to maintain the simplistic usage of these APIs instead of redundant if (string) res=strncmp(fn(),"cmp",n); flowing all over the place. Hence, since the version, name and config is already pre-initialized with empty string, just dont check for invalid header in the first place and return the empty string to the caller. Reported-by:
Brad Griffis <bgriffis@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by:
-
Nishanth Menon authored
config should have been initialized along with others as defaults. Signed-off-by:
-
Nishanth Menon authored
We should have used TI_DEAD_EEPROM_MAGIC in the first place. Fixes: d3b98a9e ("ti: common: dra7: Add standard access for board description EEPROM") Signed-off-by:
-
Alexander von Gernler authored
Signed-off-by:Alexander von Gernler <grunk@pestilenz.org>
-
- Oct 30, 2016
-
-
http://git.denx.de/u-boot-sunxiTom Rini authored
-
http://git.denx.de/u-boot-sunxiTom Rini authored
-
Chen-Yu Tsai authored
The Cubieboard4 is an A80 SoC based development board from Cubietech. This board has a UART port, 4 USB host ports, a USB 3.0 OTG connector, HDMI and VGA outputs, a micro SD slot, 8G eMMC flash, 2G DRAM, a WiFi/BT combo chip, headphone and microphone jacks, IR receiver, and GPIO headers. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Stefan Brüns authored
mksunxiboot is useful outside of u-boot, it is e.g. used by sunxi-tools. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
-
Chen-Yu Tsai authored
The A80 Optimus Board was launched with the Allwinner A80 SoC. It was jointly developed by Allwinner and Merrii. This board has a UART port, a JTAG connector, 2 USB host ports, a USB 3.0 OTG connector, an HDMI output, a micro SD slot, 16G eMMC flash, 2G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone jack, IR receiver, and additional GPIO headers. Signed-off-by:
-
Amit Singh Tomar authored
Mostly by adding MACH_SUN50I to some existing #ifdefs enable support for the the HCI0 USB host controller on the A64. Fix up some minor 64-bit hiccups on the way. Add the bare minimum DT bits to the A64 .dtsi and enable the controllers and the PHY on the Pine64. This is limited to the first USB controller at the moment, which is connected to the lower USB socket on the Pine64 board. [Andre: remove unneeded defines, enable OHCI, add commit message] Signed-off-by:
Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
-
Chen-Yu Tsai authored
Both the A80 Optimus board and the Cubieboard 4 use a zq value of 4145117, or 0x3f3fdd. Signed-off-by:
-
Stefan Mavrodiev authored
Originally dram clock was set to 480MHz, but this behaves unstable. To improve stability the clock is reduced to 384MHz Signed-off-by:
Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by:
-
Chen-Yu Tsai authored
The A80 has SID e-fuses. Like other newer SoCs, the actual e-fuses are at an offset of 0x200 within the SID address space. Signed-off-by:
-
Andre Przywara authored
The sun8i-emac driver works fine with the A64 Ethernet IP, but we are missing an alias entry to trigger the driver instantiation by U-Boot. Add the line to point U-Boot to the Ethernet DT node. This enables TFTP boot on the Pine64. Signed-off-by:
-
Chen-Yu Tsai authored
In Allwinner's SDK the A80 is clocked to 1008 MHz by default. Signed-off-by:
-
Masahiro Yamada authored
ARCH_SUNXI selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT is not used. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
-
Philipp Tomsich authored
The A80 can support 8-bit eMMC with reset on the PC pingroups. Signed-off-by:
-
Jagan Teki authored
CONFIG_SUNXI -> CONFIG_ARCH_SUNXI and removed CONFIG_SUNIX from config_whitelist.txt Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jagan Teki <jteki@openedev.com> Reviewed-by:
-
Philipp Tomsich authored
Now that DRAM initialization and clock setup is supported, we can enable SPL for the A80. [wens@csie.org: Added commit message] Signed-off-by:
-
Philipp Tomsich authored
This is a cleaned up version set_pll() from Allwinner's boot0 source (bootloader/basic_loader/bsp/bsp_for_a80/common/common.c). [wens@csie.org: Added commit message; style cleanup] Signed-off-by:
-
Philipp Tomsich authored
Since the A80 has many cores which we intend to use in SMP fashion, we should set the SMP bit for the boot CPU. [wens@csie.org: Added commit message] Signed-off-by:
-
Philipp Tomsich authored
On sun9i, the GTBUS manages transaction priority and bandwidth for multiple read ports when accessing DRAM. The initialisation mirrors the settings from Allwinner's boot0 for now, even though this may not be optimal for all applications (e.g. headless systems might want to give priority to IO modules). Adding a common callout to gtbus_init() from the SPL clock init with a weakly defined implementation in sunxi/clock.c to fallback to for platforms that don't require this. [wens@csie.org: Moved gtbus_sun9i.c to arch/arm/mach-sunxi/; style cleanup] Signed-off-by:
-
Philipp Tomsich authored
This adds DRAM initialisation code for sun9i, which calculates the appropriate timings based on timing information for the supplied DDR3 bin and the clock speeds used. With this DRAM setup, we have verified DDR3 clocks of up to 792MHz (i.e. DDR3-1600) on the A80-Q7 using a dual-channel configuration. [wens@csie.org: Moved dram_sun9i.c to arch/arm/mach-sunxi/; style cleanup] Signed-off-by:
-
- Oct 29, 2016
-
-
git://git.denx.de/u-boot-socfpgaTom Rini authored
-
git://git.denx.de/u-boot-usbTom Rini authored
-
-
Andre Przywara authored
OHCI has a known limitation of allowing only 32-bit DMA buffer addresses, so we have a lot of u32 variables around, which are assigned to pointers and vice versa. This obviously creates issues with 64-bit systems, so the compiler complains here and there. To allow compilation for 64-bit boards which use only memory below 4GB anyway (and to avoid more invasive fixes), adjust some casts and types and assume that the EDs and TDs are all located in the lower 4GB. This fixes compilation of the OHCI driver for the Pine64. Signed-off-by:
-
Tom Rini authored
This was turned off by accident, re-enble. Signed-off-by: -
Jagan Teki authored
Signed-off-by:Jagan Teki <jagan@openedev.com>
-
Stephen Warren authored
ARMv7 Tegra boards aren't currently covered by any other travis-ci jobs. Add a new job to build them. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Reviewed-by:
Heiko Schocher <hs@denx.de>
-
Stephen Warren authored
Use buildman to compile any U-Boot binary tested by test/py. This re-uses all the work done elsewhere to make buildman work within Travis-CI, in particular related to toolchain downloading and buildman config file creation. Signed-off-by:
-
Masahiro Yamada authored
Introduce run-time DDR PHY training. Signed-off-by: -
Masahiro Yamada authored
Add the LD11 SoC data and adjuts the printf() format because this is a 64-bit SoC. Otherwise, 16-digits pointer addresses would break the log format. Signed-off-by: -
Masahiro Yamada authored
Do not hard-code the number of DX blocks because it is a different value for LD11 SoC. Move the macro NR_DATX8_PER_DDRPHY to ddrphy-training.c since it is the last user. Signed-off-by: -
Masahiro Yamada authored
The DDR PHY register view of LD11 is slightly different from that of LD4/Pro4/sLD8, but it will be possible to share the register macros (and I want to re-use as much code as possible). Change the code in the more flexible form. Signed-off-by: -
Masahiro Yamada authored
The USB boot without the stand-by MPU is available on ES3 or later of LD11 SoC, but the code in this if-conditional block must not be run when booting from USB. Check if the boot device is USB, and skip the code in the case. Signed-off-by:
-
