The defconfig patch will enable the the SPL and NAND settings.
The update to Kconfig will allow the SPL to configured in and
built.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

Previously, Omap3_logic assumed X-loader was present.  With this
patch, we can finally replace X-loader with an MLO generated by
U-Boot.  This requires ECC to be setup to match the Linux Kernel
and the PBIAS confgured for the SD card.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

The P5 header was not present on "Model B" any board prior to Revision 2.0,
there's no need for a separate device tree.

Also, it looks like "rev2" is incorrectly used to only cover the 512MiB
memory models; there also were 256MiB 2.0 boards.

I don't have all of the boards to check this, I'm following this table:
http://elinux.org/RPi_HardwareHistory#Board_Revision_History



Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

This source has been blessed by Dom Cobley at the RPi Foundation, so seems
like the best source to refer to. It's a superset of and consistent with
the other sources.

Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>

Add trivial support for changing the U-Boot command prompt string
by setting PS1 and PS2 environment variables. Only static variables
are supported.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

Pull the code which displays U-Boot prompt and reads the command line
into a separate function. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

This patch removes the uart clock enable from serial driver & move it in the
board code.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

introduce a README how to use tbot for testing U-Boot
and/or linux kernels.

Signed-off-by: Heiko Schocher <hs@denx.de>

Enhance pin muxing to enable more board features and reduce power
based on Tony's device tree work.

Signed-off-by: Adam Ford <aford173@gmail.com>

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>

disabled original parsing, but not yet removed since the
argument indexing needs to be fixed

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>

goal is to use getopt for all argument parsing instead of adhoc
parsing in fw_getenv/fw_setenv functions

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>

passing argv/argc can produce off-by-one errors

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>

NULL check is made after the pointer dereference. This patch
fixes this issue.

Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

Fix device tree name:

+(xilinx-ppc405-generic) Device Tree Source is not correctly specified.
+(xilinx-ppc405-generic) Please define 'CONFIG_DEFAULT_DEVICE_TREE'
+(xilinx-ppc405-generic) or build with 'DEVICE_TREE=<device_tree>'
argument
+(xilinx-ppc405-generic) make[2]: ***
[arch/powerpc/dts/xilinx-ppc440-generic.dtb] Error 1
+(xilinx-ppc405-generic) make[1]: *** [dts] Error 2

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

emac module of the davinci platform supports only 8 tx and 8
rx channels (total 16). emac driver for davinci platform,
however, while doing initialization of the dma descriptor
head pointers, wrongly initializes the 16 head pointers
(instead of  8) for tx dma and 16 head pointers (insted of 8)
for rx dma, which is wrong. The result is, that this register
initilization spills over the other registers which was not
intended and is undesirable. This patch fixes this problem.

Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

Introduce fdtdec_get_child_count for get the number of subnodes
of one parent node.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>

The option was renamed to CONFIG_CONSOLE_ROTATION and Rockchip boards
were not updated. However this option is is not needed by default for
Rockchip since we don't need a rotated console for current boards. So just
remove the old option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Use __maybe_unused which should avoid the Coverity error.

Reported-by: Coverity (CID: 134900)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Close the file earlier to hopefully fix a Coverity error.

Reported-by: Coverity (CID: 134901)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Using short doesn't save anything and is confusing when the width and height
variables are ulong.

This may fix Coverity CID134902 but I doubt it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

All paths should share the same return.

Reported-by: Coverity (CID:134903)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

This fixes the following error when building microblaze-generic:

net/eth-uclass.c: In function 'eth_post_probe':
net/eth-uclass.c:466:18: error: 'gd' undeclared (first use in this function)
    ops->start += gd->reloc_off;

Fixes: db9391e1 ("net: Move driver-model code into its own file")

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>

Set up the debug UART early if enabled, so that it is ready to use.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>

Now that we have converted all x86 codes to DM PCI, drop pci_type1.c
which is only built for legacy PCI. Also per checkpatch.pl warning,
DEFINE_PCI_DEVICE_TABLE is now deprecated so drop that too.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Now that all x86 codes have been converted to use proper DM PCI APIs,
it's time to disable the legacy compatible layer.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

When CONFIG_DM_PCI_COMPAT is not on, there is only a forward declaration
for pci_write_config32(). Add other missing ones.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

This board uses RTL8169 which is a driver model ethernet driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Now that the RTL8169 driver warning is fixed we can drop this.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

It does not build if without CONFIG_DM_PCI_COMPAT. For now we just
disable it, until some day we add USB support to EFI application.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Move some #undef from efi-x86.h to efi-x86_defconfig as these are
already Kconfig options.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

There are still two places in Quark's MRC codes that use the generic
legacy PCI APIs, but as we are phasing out these legacy APIs, switch
to use Quark's own PCI config routines.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Update this driver to use proper DM PCI APIs.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert to use native DM PCI API dm_pci_mem_to_phys().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>