Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>

Changes to match 5121 device tree going mainline in 2.6.25.

Change OF_SOC from "soc5121" to plain "soc".
Remove unneeded "ref-frequency" fixups.
Remove "address" enetaddr fixup.

Add bus-frequency fixup for old OF_SOC so old
kernels with old device trees will work with new
u-boot with 66MHz IPS clock

Signed-off-by: John Rigby <jrigby@freescale.com>

Recommended frequency is 66MHz
Change divider from 4 to 3.

Signed-off-by: John Rigby <jrigby@freescale.com>

missing migration from "Cleanup of some init functions"
in c837dcb1

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Larry Johnson <lrj@acm.org>

allow to use a different server as set in serverip
add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
if not defined the max length will be at 128

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

According to the OMAP5912 Serial Interfaces Reference Guide (see
http://focus.ti.com/lit/ug/spru760c/spru760c.pdf

, page 150), the
FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
changed when the baud clock is not running, i. e. when both DLL and
DLH are set to 0.

Thus make sure that DLL and DLH are 0 when writing the FCR.

Signed-off-by: Wolfgang Denk <wd@denx.de>

This patch adds NAND support to the S3C24x0 SoC code in u-boot

Signed-off-by: Harald Welte <laforge@openmoko.org>

This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's

Signed-off-by: Harald Welte <laforge@openmoko.org>

This patch allows us to use the 'gd' pointer (and thus environment
and everything else associated with it) from interrupt context on
arm920t.

Signed-off-by: Harald Welte <laforge@openmoko.org>

This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
plus a stub implementation of it for the S3C2410.

The purpose is to allow arm920t implementations such as the s3c24x0 to
implement interrupt handlers in u-boot without having to touch core
arm920t code.

Signed-off-by: Harald Welte <laforge@openmoko.org>

Add ifdef to bdinfo command to display ethernet information
only if CONFIG_CMD_NET is defined for arm modules.

Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>

Adds I2C init func call to init sequence for ARM boards. This is
present in ppc,blackfin and other processor init sequence.

Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>

Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
indentation.

Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
I'm sending this patch 4th (!) time in hope it produces at least some
reaction.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>

Fix at91rm9200dk base and environment address.

MMC support for X_Scale PXA is broken and does not work.
Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
There were already some patches around the world but none of them was
merged into the official u-boot tree.

This patch makes order fixing this issue. Resubmit after code cleanup.

Applied and tested on PXA 270 (TrizepsIV module).

Signed-off-by: Stefano Babic <sbabic@denx.de>

Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
issues generates wrong code.
(Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
This patch fixes the problem and solves the gcc-4 issues as the linux
kernel does.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

The commit 04a9e118
cause the 83xx immap broken, so the DMA and PCI will
be failed.

The patch fix the struct spi8xxx and rm struct spi83xx.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Add support for the ATNGW100 Network Gateway reference design,
including flash, ethernet and MMC support.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

I don't know why the relevant layers can't do this by itself, but this
is what ppc does.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Hi,

The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
files that
contain changes for multiple boards, the board-specific files follow as
separate patches.

Signed-off-by: Michael Schwingen <michael@schwingen.org>

Signed-off-by: Michael Schwingen <michael@schwingen.org>