Add build target for generating boot partition images recognised by
the SoCFPGA BootROM. The SoCFPGA BootROM expects four copies of the
u-boot-spl-dtb.sfp at the beginning of boot partition. Those are
u-boot-spl-dtb.bin augmented by a header with which the BootROM can
work. The u-boot-dtb.img uImage is appended to this to produce a
full boot partition image, the u-boot-with-spl-dtb.sfp . This is
the name of the final target.

Signed-off-by: Marek Vasut <marex@denx.de>

This patch enables the SDRAM controller that is used on Altera's SoCFPGA
family. This patch configures the SDRAM controller based on a configuration
file that is generated from the Quartus tool, sdram_config.h.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

Most EFI implementations use 64-bit. Add a way to build U-Boot as a 64-bit
EFI payload. The payload unpacks a (32-bit) U-Boot and starts it. This can
be enabled for x86 boards at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Improvements to how the payload is built:
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

It is useful to be able to load U-Boot onto a board even if is it already
running EFI. This can allow access to the U-Boot command interface, flexible
booting options and easier development.

The easiest way to do this is to build U-Boot as a binary blob and have an
EFI stub copy it into RAM. Add support for this feature, targeting 32-bit
initially.

Also add a way to detect when U-Boot has been loaded via a stub. This goes
in common.h since it needs to be widely available so that we avoid redoing
initialisation that should be skipped.

Signed-off-by: Simon Glass <sjg@chromium.org>
Improvements to how the payload is built:
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

Add support for building U-Boot as an EFI application with a .efi suffix.
This can be loaded by EFI provided that EFI has the same bit width (32-
or 64-bit) as U-Boot. This unfortunate limitation is imposed by EFI.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

This is currently done for all targets, since 0xff is the default erased
value for most flash devices. In some cases this is not what we want (e.g.
for EFI images) so provide a command to do a vanilla objcopy.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Secure Boot Target is added for NAND for P3041.
For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC.
In case of secure boot, this default address maps to Boot ROM.
The Boot ROM code requires that the bootloader(U-boot) must lie
in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF.

In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is
configured as SRAM. U-Boot binary will be located on SRAM configured
at address 0xBFF00000.
In the U-Boot code, TLB entries are created to map the virtual address
0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM.

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

In order to achieve reproducible builds in U-Boot, timestamps that are defined
at build-time have to be somewhat eliminated. The SOURCE_DATE_EPOCH environment
variable allows setting a fixed value for those timestamps.

Simply by setting SOURCE_DATE_EPOCH to a fixed value, a number of targets can be
built reproducibly. This is the case for e.g. sunxi devices.

However, some other devices might need some more tweaks, especially regarding
the image generation tools.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

Prior to this commit, it was impossible to use relative path to
include Makefiles from the top level Makefile because the option
"--include-dir=$(srctree)" becomes effective when Make enters into
sub Makefiles.

To use relative path in any places, this commit moves the option
above the "sub-make" target.

This was imported from Linux (commit a436bb7b8063) and adjusted for
U-Boot.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

Update some build scripts to match Linux 4.1.  Commit-based syncing
was done so as not to break U-Boot specific changes.
The previous big sync was from Linux 3.18-rc1 by commit 176d0982
(kbuild: sync misc scripts with Linux 3.18-rc1).

The commits imported from Linux (some with adjustments) are:

[1] commit 9fb5e5372208973984a23ee6f5f025c05d364633
    Author: Robert Richter <rrichter@cavium.com>
    dts, kbuild: Factor out dtbs install rules to Makefile.dtbinst

[2] commit 371fdc77af44f4cb32475fd499e1d912ccc30890
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: collect shorthands into scripts/Kbuild.include

[3] commit a29b82326ed4eb5567b03c85b52c6891578d5a03
    Author: Michal Marek <mmarek@suse.cz>
    kbuild: Remove duplicate $(cmd) definition in Makefile.clean

[4] commit 1846dfbde3e8a53f3673dcb1c1b79fd9b3f8d40d
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: remove redundant -rR flag of hdr-inst

[5] commit 34948e0bbf98640fc1821751b01d2f0cd17d84d5
    Author: Michal Marek <mmarek@suse.cz>
    kbuild: Drop support for clean-rule

[6] commit a16c5f99a28c9945165c46da27fff8e6f26f8736
    Author: Michal Marek <mmarek@suse.cz>
    kbuild: Fix removal of the debian/ directory

[7] commit d0d38cd9e853db11e0242b3df4c9c3c4a663fbb4
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: use mixed-targets when two or more config targets are given

[8] commit dd33c03b18b3f2db791eb6a17c37d2de66e4de18
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: fix cc-ifversion macro

[9] commit 665d92e38f65d70796aad2b8e49e42e80815d4a4
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: do not add $(call ...) to invoke cc-version or cc-fullversion

[10] commit 6dcb4e5edf39e3b65a75ca76f087b2fdbee8a808
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: allow cc-ifversion to have the argument for false condition

[11] commit c0a80c0c27e5e65b180a25e6c4c2f7ef9e386cd3
    Author: Heiko Carstens <heiko.carstens@de.ibm.com>
    ftrace: allow architectures to specify ftrace compile options

[12] commit 0b24becc810dc3be6e3f94103a866f214c282394
    Author: Andrey Ryabinin <a.ryabinin@samsung.com>
    kasan: add kernel address sanitizer infrastructure

[13] commit 4218affdf57f938c04e3a916a9685ee27079f377
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: remove warning about "make depend"

[14] commit 77479b38e2f58890eb221a0418357502a5b41cd6
    Author: Nathan Rossi <nathan.rossi@xilinx.com>
    kbuild: Create directory for target DTB

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The u-boot-spl.kwb build target needs the SPL text-base
(CONFIG_SPL_TEXT_BASE) as load and execution address.

Signed-off-by: Stefan Roese <sr@denx.de>

The SPL device tree size must be minimised to save memory. Only include
properties that are needed by SPL - this is determined by the presence
of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of
unused properties from the nodes that remain.

Signed-off-by: Simon Glass <sjg@chromium.org>

Move X86_OPTION_ROM_FILE & X86_OPTION_ROM_ADDR to arch/x86/Kconfig
and rename them to VGA_BIOS_FILE & VGA_BIOS_ADDR which depend on
HAVE_VGA_BIOS. The new names are consistent with other x86 binary
blob options like HAVE_FSP/FSP_FILE/FSP_ADDR.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Tom Rini <trini@konsulko.com>

-fdelete-null-pointer-checks flag controls global dataflow analyses and
eliminate useless checks for null pointers; It assume that if a pointer is
checked after it has already been dereferenced, it cannot be null.
This flag is enabled by default.

gcc v4.9 has more optimizations added to this option. Hence it is very
aggressive with GCC v4.9 series. Add -fno-delete-null-pointer-checks to
disable the optimization

Signed-off-by: Rohit Dharmakan <rohitarulraj@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Since 741e58e0 (Create a .cfg file containing the CONFIG options
used to build), all the Blackfin boards fail to build if the parallel
(-j) option is passed.

  $ make -s bf506f-ezkit_defconfig
  #
  # configuration written to .config
  #
  $ make -j8 CROSS_COMPILE=bfin-elf-
  scripts/kconfig/conf --silentoldconfig Kconfig
    CHK     include/config.h
    UPD     include/config.h
    GEN     include/autoconf.mk
    GEN     include/autoconf.mk.dep
    CHK     include/config/uboot.release
    CHK     include/generated/timestamp_autogenerated.h
    UPD     include/generated/timestamp_autogenerated.h
    CFG     u-boot.cfg
  include/asm-offsets.h:3:43: fatal error:
  generated/generic-asm-offsets.h: No such file or directory
  compilation terminated.
  make: *** [u-boot.cfg] Error 1

When parsing header files for defined CONFIG options, DO_DEPS_ONLY
must be defined to exclude generated headers that might not have
been available yet.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Define U_BOOT_TZ alongside U_BOOT_TIME and U_BOOT_DATE and use it to
include the timezone in the version output.

Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Chris Packham <judge.packham@gmail.com>

Add a new "env" subcommand to the ut command.

This will run unit tests on the env code. This should be targetable to
any device that supports the env features needed for the tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

This commit introduces the implementation of dm regulator API.
Device tree support allows for auto binding. And by the basic
uclass operations, it allows to driving the devices in a common
way. For detailed informations, please look into the header file.

Core files:
- drivers/power/regulator-uclass.c - provides regulator common functions api
- include/power/regulator.h - define all structures required by the regulator

Changes:
- new uclass-id: UCLASS_REGULATOR
- new config: CONFIG_DM_REGULATOR

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Du Huanpeng <u74147@gmail.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

At present CONFIG options are split across Kconfig and board config headers
files. Also we have multiple files containing these CONFIG options.

In order to see exactly what is being used for building, create a .cfg
file which holds these options as reported by the C preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>

With sandbox we want to be able to emulate USB devices so that we can test
the USB stack. Add a uclass to support this. It implements the same
operations as a normal USB device driver, but in this case passes them on
to an emulation driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

Now that the entire dwc3 driver is adapted to compile with uboot build,
modify the Makefiles so that the dwc3 driver can be built.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Work_92105 from Work Microwave is an LPC3250-
based board with the following features:
- 64MB or 128MB SDR DRAM
- 1 GB SLC NAND, managed through MLC controller.
- Ethernet
- Ethernet + PHY SMSC8710
- I2C:
  - EEPROM (24M01-compatible)
  - RTC (DS1374-compatible)
  - Temperature sensor (DS620)
  - DACs (2 x MAX518)
- SPI (through SSP interface)
  - Port expander MAX6957
- LCD display (HD44780-compatible), controlled
  through the port expander and DACs

This board has SPL support, and uses the LPC32XX boot
image format.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>

Since the Kconfig conversion, config.mk has been included only when
include/config/auto.conf is newer than the .config file.

It causes build error if both files have the same time-stamps.
It is actually possible because EXT* file systems have a 1s time-stamp
resolution.

The config.mk should be included when include/config/auto.conf is
*not older* than the .config file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Tom Rini <trini@konsulko.com>
Reported-by: York Sun <yorksun@freescale.com>
Reported-by: Stephen Warren <swarren@nvidia.com>
Reported-by: Matthew Gerlach <mgerlach@opensource.altera.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Move the option to Kconfig renaming it to CONFIG_HAVE_GENERIC_BOARD.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>

We have switched to the single .config configuration system,
the same one as used in Linux Kernel.

The necessary glue code is small enough now, so move it to the
top-level Makefile and scripts/kconfig/Makefile, and then delete
scripts/multiconfig.sh.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@ti.com>

Commit a93648d1 introduced linker generated
lists for imagetool which is the base for some host tools (mkimage, dumpimage,
et al.).  Unfortunately some host tool chains do not support the used type of
linker scripts. Therefore this commit broke these host-tools for them, namely
FreeBSD and Darwin (OS/X).

This commit tries to fix this. In order to have a clean distinction between host
and embedded code space we need to introduce our own linker generated list
instead of re-using the available linker_lists.h provided functionality.  So we
copy the implementation used in linux kernel script/mod/file2alias.c which has
the very same problem (cause it is a host tool). This code also comes with an
abstraction for Mach-O binary format used in Darwin systems.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>

This build target now includes the SPL binary as the bin_hdr into the
kwb image. Its used on the AXP port with the mainlined DDR training code.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>

Rather than requiring the Makefile to be modified, provide a build option to
enable the ROM to be built.

We cannot do this by default since it requires binary blobs. Without these
the build will fail.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Signed-off-by: Tom Rini <trini@ti.com>