This patch shrinks the PMC440 u-boot binary (from next branch)
to fit into 384kB again.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

This is not the sequoia board.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

The latest changes in the u-boot/next branch increased the size of the
alpr image a bit more. Now it doesn't fit into the 256k reserved for it.
This patch now removes the commands "askenv" and "irq" which are not
needed in the production systems.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>

This patch removes the duplicted implementations of the pci_master_init()
function by introducing a weak default function for it. It can be
overridden by a board specific version.

Signed-off-by: Stefan Roese <sr@denx.de>

This patch removes the duplicted implementations of the pci_pre_init()
function by introducing a weak default function for it. This weak default
has a different implementation for some PPC variants. It can be
overridden by a board specific version.

Signed-off-by: Stefan Roese <sr@denx.de>

This patch removes the duplicted implementations of the pci_target_init()
function by introducing a weak default function for it. This weak default
has a different implementation for 440EP(x)/GR(x) PPC's. It can be
overridden by a board specific version (e.g. PMC440, korat).

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>

Dirk Behme authored 15 years ago and Heiko Schocher committed 15 years ago

Add support to use second and third I2C bus, too.

Bus 0 is still the default, but by calling i2c_set_bus_num(1/2) before doing
I2C accesses, code can switch to bus 1 and 2, too. Don't forget to switch
back afterwards, then.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

Define and use CONFIG_ENV_ADDR_FLEX and CONFIG_ENV_SIZE_FLEX
for storing environment variables.

Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>
Signed-off-by: Amul Kumar Saha <amul.saha@samsung.com>

This patch adds support for Flex-OneNAND devices.

Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>
Signed-off-by: Amul Kumar Saha <amul.saha@samsung.com>

The commit 66372fe2 manually relocated the bbt pattern pointer,
which can be removed by using full relocation.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>

Take advantage of the latest full relocation commit of PPC platform
for boot from NAND.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>

The syndrome based page read/write routines store ECC, and possibly other
"OOB" data, right after each chunk of ECC'd data.  With ECC chunk size of
512 bytes and a large page (2KiB) NAND, the layout is:

  data-0 OOB-0 data-1 OOB-1 data-2 OOB-2 data-3 OOB-3 OOB-leftover

Where OOBx is (prepad, ECC, postpad).  However, the current "raw" routines
use a traditional layout -- data OOB, disregarding the prepad and postpad
values -- so when they're used with that type of ECC hardware, those calls
mix up the data and OOB.  Which means, in particular, that bad block
tables won't be found on startup, with data corruption and related chaos
ensuing.

The current syndrome-based drivers in mainline all seem to use one chunk
per page; presumably they haven't noticed such bugs.

Fix this, by adding read/write page_raw_syndrome() routines as siblings of
the existing non-raw routines; "raw" just means to bypass the ECC
computations, not change data and OOB layout.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

When computing oobavail from the list of free areas in the OOB,
don't assume there will always be an unused slot at the end.
This syncs up with the kernel NAND driver.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

The patch updates the check condition for determining
whether the ECC corrections has failed.
This makes it similar to what is in the kernel NAND driver.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Patch updates the comments and explanations for
the arguments to various functions.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

This was originally part of Thomas Gleixner's patch for
adding support for 4KiB pages.
This is not part of the U-Boot NAND driver so updating the
driver with this to sync up with the kernel NAND driver.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Patch removes already commented out dead code

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

This patch updates the "chip_shift" calculation in the
NAND driver. This is being done to sync up the NAND driver with
the kernel NAND driver.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

This patch adds support for NANDs greater than 2 GB.
Patch is based on the MTD NAND driver in the kernel.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

Also remove vague, unnecessary comment

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

We were incorrectly use the max CAM size as the number of entries in
the array for setting up the addrmap.  We should be using the NENTRY
field which is the low 12-bits of TLB1CFG.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Make smc911x_initialize return -1 on error and number of interfaces
detected otherwise.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was
missed.  The config option needed updating as well as overhauling of the
rergister read/write functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

commit 1542fbde
introduced one new bug to chip-select interleaving.

Single DDR controller also can do the chip-select
interleaving if there is dual-rank or qual-rank DIMMs.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Sometimes, inside NetLoop, eth_halt() is called before eth_init() has
been called. This is harmless except for free() calls to pointers
which have not been allocated yet.

This patch initializes those pointers to NULL and allocates them only
the first time. This way we can get rid of free calls in halt callback.

This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

This patch fixes erroneous access to the ethernet PHY which broke the driver.
1. Selector field in the auto-negotiation register must be 0x00001 for
using 802.3, not 0x00000 which is reseved.
2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not
0x0 fixed address.

This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.

Now using proper defines for auto-negotiation register.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

------------------------------------------------------------------------

GCC 4.4 complains about this now.

Signed-off-by: Ron Lee <ron@debian.org>

This patch removes the Katmai "bootstrap" command and replaces it
with the now common command "chip_config".

Signed-off-by: Stefan Roese <sr@denx.de>

All currently available 4xx derivats have the I2C bootstrap EEPROM
located on I2C bus number 0. This patch now first sets this bus number,
so that the chip_config command also works for board with multiple
I2C busses, like Katmai.

Signed-off-by: Stefan Roese <sr@denx.de>

-add UBI support
-increase malloc'able memory size
-cleanup MONITOR|FLASH_BASE|LEN constants

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

Both lpd7a400 and lpd7a404 failed to compile because they had
CONFIG_SMC_USE_IOFUNCS defined:

examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw'

Also removed an orphaned paren in lpd7a404.h

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

This patch fixes the following warnings:

Configuring for xaeniax board...
smc91111_eeprom.c: In function 'print_macaddr':
smc91111_eeprom.c:278: warning: suggest parentheses around + or - in operand of &
smc91111_eeprom.c:281: warning: suggest parentheses around + or - in operand of &
...
Configuring for xsengine board...
smc91111_eeprom.c: In function 'print_macaddr':
smc91111_eeprom.c:278: warning: suggest parentheses around + or - inside shift
smc91111_eeprom.c:281: warning: suggest parentheses around + or - inside shift

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>