The .flashprog section was only needed back when we were running
directly from flash, and it's even more useless on NGW100 since it
uses the CFI flash driver which never used this workaround in the
first place.

Remove it on STK1000 as well, and get rid of all the associated code and
annotations.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
the chip has a MACB controller, not when it has a USART.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

This patch forces the watchdog off in all cases.  That will at least
get rid of the constant reboot cycle, though it won't let the watchdog
actually run in the new kernels:  its probe() comes up with a polite
warning.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

Make STK1002 and NGW100 boards act more alike:
  - STK boards can use as many arguments as NGW
  - STK boards don't need to manage FPGAs either
  - NGW commands should match STK ones

Also spell U-Boot right in prompts for STK1002 and NGW100.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
[haavard.skinnemoen@atmel.com: update STK100[34] as well]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

Conflicts:

	include/configs/socrates.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

In case of several PCI USB controllers on a board this variable
specifys which controller to use.
See doc/README.generic_usb_ohci for details.

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

Signed-off-by: Christian Eggers <ceggers@gmx.de>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>

Signed-off-by: Christian Eggers <ceggers@gmx.de>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>

Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
In case of several PCI USB controllers on a board this variable
specifys which controller to use.

Also add USB support for sokrates board.

See doc/README.generic_usb_ohci for details.

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>

introduced by 53677ef1 "Big white-space cleanup."

Signed-off-by: Wolfgang Denk <wd@denx.de>

Reuse the existing DIU driver in board/freescale/common.

Signed-off-by: York Sun <yorksun@freescale.com>

Add DIU and cfb console support to FSL 5121ADS board.

Use #define CONFIG_VIDEO in config file to enable fb console.

Signed-off-by: York Sun <yorksun@freescale.com>

Remove DPRINTF macro and replace it with generic debug macro.

Signed-off-by: York Sun <yorksun@freescale.com>

The clock divider has different format in 5121 and 8610. This patch moves it to
board specific code.

Signed-off-by: York Sun <yorksun@freescale.com>

This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.

This way we become able to utilize the full post_log_word for POST
activities (overwise, POST ECC, which has 0x8000 ID, could be
erroneously treated as started in post_output_backlog() even if there
was actually no POST ECC run (because of OCM POST failure, for
example).

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Don't run futher tests in case of a test fails that is marked as
POST_STOP.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

Switch the OCM testid with the codec one. The reason is that current
implementation requires the POST_ROM testid to fit into lower 16
bits, and the codec test will never run with POST_ROM hopefully.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Added OCM test to POST layer. This version runs before all other tests
but doesn't yet interrupt post sequence on failure.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>

Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
Correct TSEC1 vs TSEC2 assignment.
Define ETHADDR and ETH1ADDR always.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>

Update CHANGELOG for release.

Signed-off-by: Wolfgang Denk <wd@denx.de>

When SATA is selected (via jumper J6) we need to disable the first PCIe
node in the device tree, so that Linux doesn't initialize it. Otherwise
the Linux SATA driver will fail to detect the devices.

The same goes the other way around too. So if PCIe is selected we need
to disable the SATA node in the device tree.

This is because PCIe port 0 and SATA on 460EX share the same pins
(multiplexed) and we have to configure in U-Boot which peripheral is
enabled.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
flash.c:398: error: label at end of compound statement

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>