- May 26, 2014
-
-
Wu, Josh authored
Now the AT91FAMILY is already defined in the at91 SoC header. The at91 board config file will include the SoC header file. So we can remove the redundant AT91FAMILY definition in at91 board config files. Signed-off-by:
Josh Wu <josh.wu@atmel.com> [rebase patch] Signed-off-by:
Andreas Bießmann <andreas.devel@googlemail.com>
-
Wu, Josh authored
Signed-off-by:
-
Wu, Josh authored
The at91x40.h is not exist. So we remove it. Signed-off-by:
-
Andreas Bießmann authored
Signed-off-by:
Bo Shen <voice.shen@atmel.com>
-
Andreas Bießmann authored
For sama5d3xek we need to modify the SPL image for correct detection by ROM code. Signed-off-by:
-
Andreas Bießmann authored
The new atmelimage converts a machine code BLOB to bootable ROM image. Atmel ROM has no sophisticated image format, it only checks the first 7 ARM vectors. The vectors can contain valid B or LDR opcodes, the 6'th vector contains the image size to load. Additionally the PMECC header can be written by the atmelimage target. The parameters must be given via the -n switch as a coma separated list. For example: mkimage -T atmelimage \ -n usePmecc=1,sectorPerPage=4,sectorSize=512,spareSize=64,eccBits=4,eccOffset=36 \ -d spl/u-boot-spl.bin boot.bin A provided image can be checked for correct header setup. It prints out the PMECC header parameters if it has one and the 6'th interrupt vector content. ---8<--- Image Type: ATMEL ROM-Boot Image with PMECC Header PMECC header ==================== eccOffset: 36 sectorSize: 512 eccBitReq: 4 spareSize: 64 nbSectorPerPage: 4 usePmecc: 1 ==================== 6'th vector has 17044 set --->8--- A SPL binary modified with the atmelimage mkimage target was succesfully booted on a sama5d34ek via MMC and NAND. Signed-off-by:
-
Andreas Bießmann authored
Signed-off-by: -
Wu, Josh authored
Signed-off-by:
-
Wu, Josh authored
We need check the NULL pointer as at91_pio_get_port() may return NULL. Also print a error message when at91_pio_get_port() failed otherwise we cannot notice the failure. Signed-off-by:
-
Bo Shen authored
Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by:
-
Bo Shen authored
Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by:
-
Bo Shen authored
Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by:
-
Bo Shen authored
Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by:
-
Bo Shen authored
It supports boot from NAND and SD/MMC card. Signed-off-by:
-
Bo Shen authored
If without switch to main crystal oscillator, the sama5d3 SoC will use internal on chip RC oscillator. In order to get better accuracy, switch to main crystal oscillator. Signed-off-by:
-
- May 25, 2014
-
-
Ian Campbell authored
The correct value for this setting can vary across SoCs and boards, so make it configurable. Also reduce the default value to 8, which is the same default as used in the Linux driver. Signed-off-by:Ian Campbell <ijc@hellion.org.uk> Cc: Alexey Brodkin <abrodkin@synopsys.com>
-
Ian Campbell authored
On Thu, 2014-05-08 at 22:26 +0100, Ian Campbell wrote: > The {r,t}xbuffs fields also need to be aligned. Previously this was done > implicitly because they immediately followed the descriptor tables. Make this > explicit and also move to the head of the struct. Looks like I managed to not actually commit the move of the field to the head of the struct! v3.1 follows.... Ian. 8<------------ >From 2937ba01841887317f6792709ed57cb86b5fc0cd Mon Sep 17 00:00:00 2001 From: Ian Campbell <ijc@hellion.org.uk> Date: Thu, 1 May 2014 19:45:15 +0100 Subject: [PATCH] net/designware: reorder struct dw_eth_dev to pack more efficiently. The {tx,rx}_mac_descrtable fields are aligned to ARCH_DMA_MINALIGN, which could be 256 or even larger. That means there is a potentially huge hole in the struct before those fields, so move them to the front where they are better packed. Moving them to the front also helps ensure that so long as dw_eth_dev is properly aligned (which it is since "net/designware: ensure device private data is DMA aligned.") the {tx,rx}_mac_descrtable will be too, or at least avoids having to worry too much about compiler specifics. The {r,t}xbuffs fields also need to be aligned. Previously this was done implicitly because they immediately followed the descriptor tables. Make this explicit and also move to the head of the struct. Signed-off-by:Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by:
-
Ian Campbell authored
This is required at least on ARM. When sending instead of simply invalidating the entire descriptor, flush as little as possible while still respecting ARCH_DMA_MINALIGN, as requested by Alexey. Signed-off-by: -
Ian Campbell authored
struct dw_eth_dev contains fields which are accessed via DMA, so make sure it is aligned to a dma boundary. Without this I see: ERROR: v7_dcache_inval_range - start address is not aligned - 0x7fb677e0 Signed-off-by:Alexey Brodkin <abrodkin@synopsys.com> Acked-by:
Marek Vasut <marex@denx.de>
-
Ian Campbell authored
Add support for booting from an MMC card. Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Henrik Nordström <henrik@henriknordstrom.net> Signed-off-by:
Tom Rini <trini@ti.com>
-
Ian Campbell authored
On Mon, 2014-05-05 at 14:18 +0200, Stefan Roese wrote: > > + case 1: > > +#if CONFIG_MMC1_PG > Are you sure that this is correct and shouldn't be: > > +#ifdef CONFIG_MMC1_PG > > ? It's "correct" in so far as it works (the boards.cfg config stuff #defines things to 1), but I think you are right that it isn't the preferred style. But... > A quick scan through this patch series shows that this define > is not set at all. Perhaps its outdated? Or is it used to support > some other sunxi SoC? Not sure, perhaps it should be removed for > now. ...I had thought that it was to support some other board which wasn't being upstreamed right now, so eventually useful and harmless for now, but I've just checked and it isn't actually used by any of the boards in u-boot-sunxi.git. So rather than fix it to use #ifdef lets drop it. Rather than resend the entire series, here is v5.1 of this patch. > Other than this please add my: > > Reviewed-by:
Luke Leighton <lkcl@lkcl.net> Signed-off-by:
Oliver Schinagl <oliver@schinagl.nl> Signed-off-by:
Wills Wang <wills.wang.open@gmail.com> Signed-off-by:
-
Ian Campbell authored
Add support for the GMAC Ethernet controller on Allwinner A20 (sun7i) processors. Enable for the Cubietruck. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Jens Kuske <jenskuske@gmail.com> Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
This patch adds generic board, start of day and basic build system support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by:
Adam Sampson <ats@offog.org> Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by:
Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by:
Emilio López <emilio@elopez.com.ar> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Luc Verhaegen <libv@skynet.be> Signed-off-by:
Patrick Wood <patrickhwood@gmail.com> Signed-off-by:
-
Ian Campbell authored
This patch adds DRAM initialisation support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by:
-
Ian Campbell authored
This patch adds the basic pinmux and gpio support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by:
Ma Haijun <mahaijuns@gmail.com> Signed-off-by:
-
Ian Campbell authored
This patch adds the basic clocks and timer support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Some of the code here is common to multiple sunxi subarchtectures, hence files are named sun4i which is the earliest similar variant. Signed-off-by:
-
Rob Herring authored
My Calxeda email is gone, so update my email address. Signed-off-by:Rob Herring <robh@kernel.org>
-
Stefan Agner authored
Set DDR_SEL_PAD_CONTR register explicitly to DDR3 which solves RAM issues with newer silicon (1.1). This register was added in revision 4 of the Vybrid Reference Manual. Signed-off-by:Stefan Agner <stefan@agner.ch>
-
David Feng authored
Signed-off-by:David Feng <fenghua@phytium.com.cn>
-
Rob Herring authored
Enable CONFIG_SYS_GENERIC_BOARD on highbank. Signed-off-by: -
Michael Walle authored
Move addresses for kernel, ramdisk and fdt blob to own variables. Add dtb blob loading to all existing boot scripts, dtb filenames were taken from vanilla kernel. Introduce new boot script bootcmd_legacy, which only loads a kernel and a ramdisk. Make this the default boot script. This should also restore the behaviour of the original bootloader. Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Tom Rini <trini@ti.com> Signed-off-by:Michael Walle <michael@walle.cc>
-
Michael Walle authored
Cc: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by:
-
- May 24, 2014
-
-
git://git.denx.de/u-boot-armTom Rini authored
-
Albert ARIBAUD authored
-
- May 23, 2014
-
-
Ilya Ledvich authored
Make the common eeprom library available for any I2C driver. Signed-off-by:
Ilya Ledvich <ilya@compulab.co.il> Signed-off-by:
Igor Grinberg <grinberg@compulab.co.il>
-
Dmitry Lifshitz authored
Add environment partition runtime detection callback. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by:
-
Dmitry Lifshitz authored
cm-t54 Eth MAC address is stored in onboard EEPROM. Add EEPROM support and setup stored Eth MAC address. If EEPROM does not contain a valid MAC, then generate it from the processor ID code (reference code is taken from OMAP5 uEvm board file). Modify Device Tree blob MAC address field with retrieved data. Signed-off-by:
-
Dmitry Lifshitz authored
Add cm-t54 board directory, config file. Enable build. Basic support includes: Serial console SD/MMC eMMC USB Ethernet Signed-off-by:
-
Sergey Alyoshin authored
As revision code 1 is for silicon revision 2.0, it is easily confused with silicon revision 1.0. Device type report also reworked in same style. Signed-off-by:Sergey Alyoshin <alyoshin.s@gmail.com>
-
