- Nov 17, 2014
-
-
Bo Shen authored
The code for this board supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display - Support ethernet - Support USB mass storage Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
Andreas Bießmann <andreas.devel@googlemail.com>
-
- Oct 27, 2014
-
-
Guillaume GARDET authored
Rename some defines containing FAT in their name to be filesystem generic: MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION Signed-off-by:Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
-
- Jul 30, 2014
-
-
Masahiro Yamada authored
Now CONFIG_SPL and CONFIG_TPL are defined in Kconfig. Remove the redundant definition in config headers. Signed-off-by:
Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Masahiro Yamada authored
We are about to switch to Kconfig in the next commit. But there are something to get done beforehand. In Kconfig, include/generated/autoconf.h defines boolean CONFIG macros as 1. CONFIG_SPL and CONFIG_TPL, if defined, must be set to 1. Otherwise, when switching to Kconfig, the build log would be sprinkled with warning messages like this: warning: "CONFIG_SPL" redefined [enabled by default] Signed-off-by:
-
- May 26, 2014
-
-
Wu, Josh authored
Now the AT91FAMILY is already defined in the at91 SoC header. The at91 board config file will include the SoC header file. So we can remove the redundant AT91FAMILY definition in at91 board config files. Signed-off-by:
Josh Wu <josh.wu@atmel.com> [rebase patch] Signed-off-by:
-
Bo Shen authored
Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." Signed-off-by:
-
Bo Shen authored
It supports boot from NAND and SD/MMC card. Signed-off-by:
-
- May 12, 2014
-
-
Masahiro Yamada authored
Some new boards define CONFIG_SYS_HZ again! Remove. Signed-off-by:
-
- Mar 09, 2014
-
-
Bo Shen authored
Add sama5d3 Xplained board support which use Atmel SAMA5D36 SoC. Now it supports boot from NAND flash and SD/MMC card. Features support: - NAND flash - SD/MMC card - Two USB hosts - Ethernet (one GMAC, one EMAC) Signed-off-by:
-
- Dec 01, 2013
-
-
Bo Shen authored
Enable Atmel sama5d3xek boart spl boot support, which can load u-boot from SD card with FAT file system. Signed-off-by:
-
- Nov 04, 2013
-
-
Bo Shen authored
Get rid of too many ifdeffery in usb ohci driver Add following two configuration for USB clock selecting - CONFIG_USB_ATMEL_CLK_SEL_PLLB: using PLLB as usb ohci input clock - CONFIG_USB_ATMEL_CLK_SEL_UPLL: using UPLL as usb ohci input clock Signed-off-by:
-
Rob Herring authored
Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by:Rob Herring <rob.herring@calxeda.com>
-
- Sep 24, 2013
-
-
Bo Shen authored
Add RNDIS gadget support to test atmel usba udc driver Signed-off-by:
-
- Sep 04, 2013
-
-
Bo Shen authored
Drop unused CONFIG_NET_MULTI Signed-off-by:
Bo Shen <voice.shen@gmail.com> Signed-off-by:
-
- Aug 22, 2013
-
-
Bo Shen authored
fix typo error for CONFIG_ENV_IS_NOWHERE from CONIG_ENV_IS_NOWHERE Signed-off-by:
-
Bo Shen authored
The CONFIG_MAX_NAND_CHIPS never used, remove it No where define LCD_TEST_PATTERN, so no need undefine Signed-off-by:
-
Wu, Josh authored
Define the galois index table offset in chip head file. So user do not need to set by himself. Driver will set it correctly according to sector_size. Signed-off-by:
Scott Wood <scottwood@freescale.com> [rebased on master] Signed-off-by:
-
Bo Shen authored
add gmac support for sama5d3xek board, the gmac embedded in: - sama5d33, sama5d34, sama5d35 Signed-off-by:
-
- Jul 24, 2013
-
-
Wolfgang Denk authored
Signed-off-by:
Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by:
Tom Rini <trini@ti.com>
-
- May 21, 2013
-
-
Bo Shen authored
Add sama5d3xek support with following feature - boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector - boot from SPI flash support - boot from SD card support - LCD support - EMAC support - USB OHCI support Signed-off-by:
-
- Mar 12, 2013
-
-
Bo Shen authored
Change nand flash partition table according to www.at91.com/linux4sam more information: http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted#Linux4SAM_NandFlash_demo_Memory Signed-off-by:
-
Nicolas Ferre authored
Support to boot zImage Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> [Add bootz for at91rm9200, at91sam9263, at91sam9rl] Signed-off-by:
-
- Jan 12, 2013
-
-
Bo Shen authored
Add dataflash boot support on at91sam9x5ek board Signed-off-by:
-
- Dec 09, 2012
-
-
Richard Genoud authored
Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Acked-by:
-
Richard Genoud authored
Signed-off-by:
-
- Nov 27, 2012
-
-
Wu, Josh authored
Signed-off-by:
Andy Fleming <afleming@freescale.com>
-
- Oct 17, 2012
-
-
Wu, Josh authored
Signed-off-by:
-
- Sep 17, 2012
-
-
Bo Shen authored
The mainline linux kernel is moving to flatten device tree support Add the CONFIG_OF_LIBFDT option to support booting DT linux kernel Signed-off-by:
-
- Sep 01, 2012
-
-
Wu, Josh authored
Signed-off-by:
-
Bo Shen authored
Add at91sam9x5 series spi flash boot support Using at91sam9x5ek_spiflash to configure, then it can boot from at25df321 serial flash SPI mater work in 30Mhz speed, while not 1Mhz speed. This will base on atmel_spi patch, or else, it will occur receive overrun Signed-off-by:
-
Bo Shen authored
Remove CONFIG_ARCH_CPU_INIT, no need it anymore Signed-off-by:
-
Bo Shen authored
Add at91sam9x5ek board support, this board support the following SoCs AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35 Using at91sam9x5ek_nandflash to configure for the board Now only supports NAND with software ECC boot up Signed-off-by:
-
- Jul 07, 2012
-
-
Bo Shen authored
Enable EHCI support instead OHCI Signed-off-by:
-
- Jun 20, 2012
-
-
Tom Rini authored
Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value different than "> " which is vision2. I have Cc'd the maintainer here as I strongly suspect this is a bug rather than intentional behavior. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by:
Stefano Babic <sbabic@denx.de>
-
Tom Rini authored
We provide a default table of { 9600, 19200, 38400, 57600, 115200 } in <config_fallbacks.h> which mkconfig places after <configs/...h> in the generated config file. This is used when a board has not set its own table. Signed-off-by:
-
- Apr 19, 2012
-
-
Marek Vasut authored
$ git grep AUTOSCRIPT include/configs/at91sam9m10g45ek.h:#undef CONFIG_CMD_AUTOSCRIPT include/configs/gplugd.h:#define CONFIG_CMD_AUTOSCRIPT Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by:
Anatolij Gustschin <agust@denx.de>
-
- Jan 26, 2012
-
-
Scott Wood authored
NAND_MAX_CHIPS has been replaced by CONFIG_SYS_NAND_MAX_CHIPS, and the latter defaults to 1. Signed-off-by:
-
- Nov 29, 2011
-
-
Stelian Pop authored
Change my old email address which is no longer valid. Signed-off-by:
Stelian Pop <stelian@popies.net> Signed-off-by:
-
- Nov 27, 2011
-
-
Stelian Pop authored
Change my old email address which is no longer valid. Signed-off-by:
-
- Oct 05, 2011
-
-
Mike Frysinger authored
Now that none of the core checks CONFIG_NET_MULTI, there's not much point in boards defining it. So scrub all references to it. Signed-off-by:Mike Frysinger <vapier@gentoo.org>
-
