Introduce virtual and physical addresses in the mapping table. This change
have no impact on existing boards because they all use idential mapping.

Signed-off-by: York Sun <york.sun@nxp.com>

When page tables are created, allow later table to be created on
previous block entry. Splitting block feature is already working
with current code. This patch only rearranges the code order and
adds one condition to call split_block().

Signed-off-by: York Sun <york.sun@nxp.com>

Make setup_pgtages() and get_tcr() available for platform code to
customize MMU tables.
Remove unintentional call of create_table().

Signed-off-by: York Sun <york.sun@nxp.com>

When secure ram is used, MMU tables have to be put into secure ram.
To use common MMU code, gd->arch.tlb_addr will be used to host TLB
entry pointer. To save allocated memory for later use, tlb_allocated
variable is added to global data structure.

Signed-off-by: York Sun <york.sun@nxp.com>

Secure_ram variable was put in generic global data. But only ARMv8
uses this variable. Move it to ARM specific data structure.

Signed-off-by: York Sun <york.sun@nxp.com>

Upon further review this breaks most other platforms as we need to check
what core we're running on before touching it at all.

This reverts commit d73718f3.

Signed-off-by: Tom Rini <trini@konsulko.com>

With the change to set up pinctrl after relocation, link fails to boot. Add
a special case in the link code to handle this.

Fixes: d8906c1f (x86: Probe pinctrl driver in cpu_init_r())

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Add support for Advantech SOM-DB5800 with the SOM-6867 installed.
This is very similar to conga-qeval20-qa3-e3845 in that there is a
reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867)
installed.

Currently supported:
 - 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on
   SOM-DB5800.
 - 4x USB 2.0 (EHCI)
 - Video
 - SATA
 - Ethernet
 - PCIe
 - Realtek ALC892 HD Audio
   Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO
   HDA_SDI0 is set in DT to enable HD Audio codec.
   Pin defaults for codec pin complexs are not changed.

Not supported:
 - Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500)
 - USB 3.0 (XHCI)
 - TPM

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

If global NVS says internal UART is not enabled, hide it in the ASL
code so that OS won't see it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Now that platform-specific ACPI global NVS is added, pack it into
ACPI table and get its address fixed up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

This introduces quark-specific ACPI global NVS structure, defined in
both C header file and ASL file.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

This introduces baytrail-specific ACPI global NVS structure, defined in
both C header file and ASL file.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

This patch adds support to enable and use the internal BayTrail UART
instead of the one integrated in the Super IO Winbond chip. For this,
a 2nd defconfig file is added.

This is useful for tests done for the congatec SoM used on baseboards
without such a Super IO chip.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

For any FSP-enabled boards that want to enable debug UART support,
setup_internal_uart() will be called, but this API is only available
on BayTrail platform. Change to wrap it with CONFIG_INTERNAL_UART.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

There are quite a number of BayTrail boards that uses an external
SuperIO chipset to provide the legacy UART. For such cases, it's
better to have a Kconfig option to enable the internal UART.

So far BayleyBay and MinnowMax boards are using internal UART as
the U-Boot console, enable this on these two boards.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

For consistency with board_should_run_oprom(), do the same to
should_load_oprom(). Board support codes can provide this one
to override the default weak one.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

At present should_load_oprom() calls board_should_run_oprom() to
determine whether oprom should be loaded. But sometimes we just
want to load oprom without running. Make them independent.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

This option is defined at nowhere. Remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

The following python error:

Traceback (most recent call last):
  File "./tools/patman/patman", line 144, in <module>
    series = patchstream.FixPatches(series, args)
  File "./tools/patman/patchstream.py", line 477, in FixPatches
    commit = series.commits[count]
IndexError: list index out of range

is seen when:

- 'END' is missing in those tags
- those tags are put in the last part in a commit message
- the commit is not the last commit of the series

Add testing logic to see if a new commit starts.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

'Series-changes' uses blank line to indicate its end. If that is
missing, series internal state variable 'in_change' may be wrong.
Correct its state.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

If 'END' is missing in a 'Cover-letter' section, and that section
happens to show up at the very end of the commit message, and the
commit is the last commit of the series, patman fails to generate
cover letter for us. Handle this in CloseCommit of patchstream.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

'Cover-letter', 'Series-notes' and 'Commit-notes' tags require an
'END' to be put at the end of its section. If we forget to put an
'END' in those sections, and these sections are followed by another
patman tag, patman generates incorrect patches. This adds codes to
handle such scenario.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

Like other patman tags, use a new variable cover_match to indicate
a match for 'Cover-letter'.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

Some uclass ids are out of order. Per the comments, sort them
in alphabetical order.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

The cros-ec keyboard is always a child of the cros-ec node. Rather than
searching the device tree, looking at the children. Remove the compat string
which is now unused.

Signed-off-by: Simon Glass <sjg@chromium.org>

The 'COMPAT_' part should appear only once so drop the duplicate part. It is
ignored anyway, but let's keep things consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

The list is shrinking and we should avoid adding new things. Instead, a
proper driver should be created with driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

A few drivers have moved to driver model, so we can drop these strings.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

We have drivers for several more devices now, so drop the strings which are
no-longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

This fixes the following compiler error:

common/fb_mmc.c: In function ‘fb_mmc_erase’:
common/fb_mmc.c:209:17: error: ‘struct blk_desc’ has no member named
‘block_erase’

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

Define a platform data structure for the MPC85XX GPIO driver to allow
use of the driver without device tree. Users should define the GPIO
blocks for their platform like this:
  struct mpc85xx_gpio_plat gpio_blocks[] = {
         {
                 .addr = 0x130000,
                 .ngpios = 32,
         },
         {
                 .addr = 0x131000,
                 .ngpios = 32,
         },
  };

  U_BOOT_DEVICES(my_platform_gpios) = {
         { "gpio_mpc85xx", &gpio_blocks[0] },
         { "gpio_mpc85xx", &gpio_blocks[1] },
  };

This is intended to build upon the recent submission of the base
MPC85XX driver from Mario Six. We need to use that new driver
without dts support and this patch gives us that flexibility.
This has been tested on a Freescale T2080 CPU, although only the first
GPIO block.

Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Tested-by: Mario Six <mario.six@gdsys.cc>
Acked-by: Simon Glass <sjg@chromium.org>

Update the method of accessing the block device so that it works with
CONFIG_BLK enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>

Update the method of accessing the block device so that it works with
CONFIG_BLK enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>

Now that we have fully moved to driver model, drop the old code.

Signed-off-by: Simon Glass <sjg@chromium.org>

Update this board to use driver model for block devices and MMC operations.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add support for using driver model for block devices and MMC operations in
this driver.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add support for using driver model for block devices and MMC operations in
this driver.

Signed-off-by: Simon Glass <sjg@chromium.org>

Move the configuration setting into a separate function which can be used by
the driver-model code.

Signed-off-by: Simon Glass <sjg@chromium.org>