Signed-off-by: Jason Jin <Jason.jin@freescale.com>

when booting filesystem from ramdisk.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>

Signed-off-by: Jason Jin <Jason.jin@freescale.com>

signed-off-by: Jason Jin <Jason.Jin@freescale.com>
signed-off-by: Wei Zhang <wei.zhang@freescale.com>

 When tftp a non-exist file from the tftp server, u-boot will check
 the link of all eth port. The original file will return wrong link
 state on the no link ports.

signed-off-by: Jason Jin <Jason.Jin@freescale.com>

During the pci scan process, Some devices return bar_reponse with the
highest bytes 0, such as the pci bridge in uli1575 return bar_response
with 0xffffff, So the bar_size should be manually set under 64K.

Signed-off-by: Jason Jin <jason.jin@freescale.com>

Signed-off-by: Jason Jin <Jason.jin@freescale.com>

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>

Do not set up BATs on secondary CPUs.  Let Linux do the nasty.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

Signed-off-by: Jon Loeliger <jdl@jdl.com>

Signed-off-by: Jon Loeliger <jdl@jdl.com>

Signed-off-by: Jon Loeliger <jdl@freescale.com>

Some 80-column cleanups.
Convert printf() to puts() where possible.
Use #include "spd_sdram.h" as needed.
Enhanced reset command usage message a bit.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

Signed-off-by: Jon Loeliger <jdl@freescale.com>

Signed-off-by: Jon Loeliger <jdl@freescale.com>

Signed-off-by: Jon Loeliger <jdl@jdl.com>

First cut at moving the PIXIS platform code out of
the 86xx cpu directory and into board/mpc8641hpcn
where it belongs.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

    "reset altbank" will reset another bank WITHOUT watch dog timer enabled
    "reset altbank wd" will reset another bank WITH watch dog enabled
    "diswd" will disable watch dog after u-boot boots up successfully

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

    Fix ECC setup bug.
    Enable 1T/2T based on number of DIMMs present.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

Signed-off-by: Jon Loeliger <jdl@jdl.com>

Updated ethernet interrupt mappings (moved up 48).
Cleaned up a few comments.

Signed-off-by: Jon Loeliger <jdl@jdl.com>

Signed-off-by: Jon Loeliger <jdl@jdl.com>

Correctly tracks r29 as global data pointer now.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

    Enable the CFI driver.
    Remove bogus LAWBAR7 cruft.
    Use correct TEXT_BASE, Fixup load script.
    Enable SPD EEPROM during DDR setup.
    Use generic RFC 1918 IP addresses by default.

Removed //-style comments.
Use 80-column lines.
Remove trailing whitespace.
Remove dead code and debug cruft.

Signed-off-by: dzu@denx.de <dzu@denx.de>

Signed-off-by: dzu@denx.de <dzu@eddie.localdomain>

Signed-off-by: dzu@denx.de <dzu@denx.de>