Skip to content
Snippets Groups Projects
mxsfb.txt 2.2 KiB
Newer Older
  • Learn to ignore specific revisions
  • * Freescale MXS LCD Interface (LCDIF)
    
    
    New bindings:
    =============
    
    Required properties:
    
    - compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
    		Should be "fsl,imx28-lcdif" for i.MX28.
    
    		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
    - reg:		Address and length of the register set for LCDIF
    - interrupts:	Should contain LCDIF interrupt
    - clocks:	A list of phandle + clock-specifier pairs, one for each
    		entry in 'clock-names'.
    - clock-names:	A list of clock names. For MXSFB it should contain:
        - "pix" for the LCDIF block clock
        - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
    
    Required sub-nodes:
      - port: The connection to an encoder chip.
    
    Example:
    
    	lcdif1: display-controller@2220000 {
    		compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
    		reg = <0x02220000 0x4000>;
    		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
    		clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
    			 <&clks IMX6SX_CLK_LCDIF_APB>,
    			 <&clks IMX6SX_CLK_DISPLAY_AXI>;
    		clock-names = "pix", "axi", "disp_axi";
    
    		port {
    			parallel_out: endpoint {
    				remote-endpoint = <&panel_in_parallel>;
    			};
    		};
    	};
    
    Deprecated bindings:
    ====================
    Required properties:
    - compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
    		Should be "fsl,imx28-lcdif" for i.MX28.
    - reg:		Address and length of the register set for LCDIF
    - interrupts:	Should contain LCDIF interrupts
    
    - display:	phandle to display node (see below for details)
    
    * display node
    
    Required properties:
    
    - bits-per-pixel:	<16> for RGB565, <32> for RGB888/666.
    - bus-width:		number of data lines.  Could be <8>, <16>, <18> or <24>.
    
    - display-timings:	Refer to binding doc display-timing.txt for details.
    
    Examples:
    
    lcdif@80030000 {
    	compatible = "fsl,imx28-lcdif";
    	reg = <0x80030000 2000>;
    	interrupts = <38 86>;
    
    
    	display: display {
    		bits-per-pixel = <32>;
    		bus-width = <24>;
    
    		display-timings {
    			native-mode = <&timing0>;
    			timing0: timing0 {
    				clock-frequency = <33500000>;
    				hactive = <800>;
    				vactive = <480>;
    				hfront-porch = <164>;
    				hback-porch = <89>;
    				hsync-len = <10>;
    				vback-porch = <23>;
    				vfront-porch = <10>;
    				vsync-len = <10>;
    				hsync-active = <0>;
    				vsync-active = <0>;
    				de-active = <1>;
    				pixelclk-active = <0>;
    			};
    		};
    	};