sitronix,st7586.txt

Sitronix ST7586 display panel

Required properties:
- compatible:	"lego,ev3-lcd".
- a0-gpios:	The A0 signal (since this binding is for serial mode, this is
                the pin labeled D1 on the controller, not the pin labeled A0)
- reset-gpios:	Reset pin

The node for this driver must be a child node of a SPI controller, hence
all mandatory properties described in ../spi/spi-bus.txt must be specified.

Optional properties:
- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)

Example:
	display@0{
		compatible = "lego,ev3-lcd";
		reg = <0>;
		spi-max-frequency = <10000000>;
		a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
	};