Newer
Older
NXP Layerscape SoC qDMA Controller
==================================
This device follows the generic DMA bindings defined in dma/dma.txt.
Required properties:
- compatible: Must be one of
"fsl,ls1021a-qdma": for LS1021A Board
"fsl,ls1028a-qdma": for LS1028A Board
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
"fsl,ls1043a-qdma": for ls1043A Board
"fsl,ls1046a-qdma": for ls1046A Board
- reg: Should contain the register's base address and length.
- interrupts: Should contain a reference to the interrupt used by this
device.
- interrupt-names: Should contain interrupt names:
"qdma-queue0": the block0 interrupt
"qdma-queue1": the block1 interrupt
"qdma-queue2": the block2 interrupt
"qdma-queue3": the block3 interrupt
"qdma-error": the error interrupt
- fsl,dma-queues: Should contain number of queues supported.
- dma-channels: Number of DMA channels supported
- block-number: the virtual block number
- block-offset: the offset of different virtual block
- status-sizes: status queue size of per virtual block
- queue-sizes: command queue size of per virtual block, the size number
based on queues
Optional properties:
- dma-channels: Number of DMA channels supported by the controller.
- big-endian: If present registers and hardware scatter/gather descriptors
of the qDMA are implemented in big endian mode, otherwise in little
mode.
Examples:
qdma: dma-controller@8390000 {
compatible = "fsl,ls1021a-qdma";
reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
<0x0 0x8389000 0x0 0x1000>, /* Status regs */
<0x0 0x838a000 0x0 0x2000>; /* Block regs */
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "qdma-error",
"qdma-queue0", "qdma-queue1";
dma-channels = <8>;
block-number = <2>;
block-offset = <0x1000>;
fsl,dma-queues = <2>;
status-sizes = <64>;
queue-sizes = <64 64>;
big-endian;
};
DMA clients must use the format described in dma/dma.txt file.