Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Synopsys DesignWare AXI DMA Controller
Required properties:
- compatible: "snps,axi-dma-1.01a"
- reg: Address range of the DMAC registers. This should include
all of the per-channel registers.
- interrupt: Should contain the DMAC interrupt number.
- dma-channels: Number of channels supported by hardware.
- snps,dma-masters: Number of AXI masters supported by the hardware.
- snps,data-width: Maximum AXI data width supported by hardware.
(0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
- snps,priority: Priority of channel. Array size is equal to the number of
dma-channels. Priority value must be programmed within [0:dma-channels-1]
range. (0 - minimum priority)
- snps,block-size: Maximum block size supported by the controller channel.
Array size is equal to the number of dma-channels.
Optional properties:
- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
in this property. If this property is missing the maximum AXI burst length
supported by DMAC is used. [1:256]
Example:
dmac: dma-controller@80000 {
compatible = "snps,axi-dma-1.01a";
reg = <0x80000 0x400>;
clocks = <&core_clk>, <&cfgr_clk>;
clock-names = "core-clk", "cfgr-clk";
interrupt-parent = <&intc>;
interrupts = <27>;
dma-channels = <4>;
snps,dma-masters = <2>;
snps,data-width = <3>;
snps,block-size = <4096 4096 4096 4096>;
snps,priority = <0 1 2 3>;
snps,axi-max-burst-len = <16>;
};