arm64: dts: imx8mm-kontron: Add support for reading SD_VSEL signal

This fixes the LDO5 regulator handling of the pca9450 driver by
taking the status of the SD_VSEL into account to determine which
configuration register is used for the voltage setting.

Even without this change there is no functional issue, as the code
for switching the voltage in sdhci.c currently switches both, the
VSELECT/SD_VSEL signal and the regulator voltage at the same time
and doesn't run into an invalid corner case.

We should still make sure, that we always use the correct register
when controlling the regulator. At least in U-Boot this fixes an
actual bug where the wrong IO voltage is used.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes for v2:
* rebase to current master

arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts

@@ -266,6 +266,10 @@ &pwm2 {
 	status = "okay";
 };
 
+&reg_nvcc_sd {
+	sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -466,7 +470,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 
@@ -479,7 +483,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 
@@ -492,7 +496,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi

@@ -342,6 +342,7 @@ reg_nvcc_sd: LDO5 {
 				regulator-name = "NVCC_SD (LDO5)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			};
 		};
 	};
@@ -794,7 +795,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
 			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
 		>;
 	};
 
@@ -807,7 +808,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
 			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
 		>;
 	};
 
@@ -820,7 +821,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
 			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
 		>;
 	};