starfire: Move the Adaptec driver

Move the Adaptec driver into drivers/net/ethernet/adaptec/ and make
the necessary Kconfig and Makefile changes.

CC: Ion Badulescu <ionut@badula.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

MAINTAINERS

@@ -6262,7 +6262,7 @@ F:	drivers/staging/xgifb/
 STARFIRE/DURALAN NETWORK DRIVER
 M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
-F:	drivers/net/starfire*
+F:	drivers/net/ethernet/adaptec/starfire*
 
 SUN3/3X
 M:	Sam Creasey <sammy@sammy.net>

drivers/net/Kconfig

@@ -345,20 +345,6 @@ config NET_PCI
 	  will be asked for your specific card in the following questions. If
 	  you are unsure, say Y.
 
-config ADAPTEC_STARFIRE
-	tristate "Adaptec Starfire/DuraLAN support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
-	  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
-	  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
-	  driver.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called starfire.  This is recommended.
-
 config NET_POCKET
 	bool "Pocket and portable adapters"
 	depends on PARPORT

drivers/net/Makefile

@@ -17,7 +17,6 @@ obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
 obj-$(CONFIG_SKFP) += skfp/
-obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_SH_ETH) += sh_eth.o
 

drivers/net/ethernet/Kconfig

@@ -12,6 +12,7 @@ menuconfig ETHERNET
 if ETHERNET
 
 source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/adaptec/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/apple/Kconfig"
 source "drivers/net/ethernet/atheros/Kconfig"

drivers/net/ethernet/Makefile

@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
 obj-$(CONFIG_NET_VENDOR_8390) += 8390/
+obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
 obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/

drivers/net/ethernet/adaptec/Kconfig

+#
+# Adaptec network device configuration
+#
+
+config NET_VENDOR_ADAPTEC
+	bool "Adaptec devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Adaptec cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_ADAPTEC
+
+config ADAPTEC_STARFIRE
+	tristate "Adaptec Starfire/DuraLAN support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
+	  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
+	  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called starfire.  This is recommended.
+
+endif # NET_VENDOR_ADAPTEC

drivers/net/ethernet/adaptec/Makefile

+#
+# Makefile for the Adaptec network device drivers.
+#
+
+obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o