commit dbc16915279a548a204154368da23d402c141c81 upstream.

Boot with slub_debug=UFPZ.

If allocated object failed in alloc_consistency_checks, all objects of
the slab will be marked as used, and then the slab will be removed from
the partial list.

When an object belonging to the slab got freed later, the remove_full()
function is called. Because the slab is neither on the partial list nor
on the full list, it eventually lead to a list corruption (actually a
list poison being detected).

So we need to mark and isolate the slab page with metadata corruption,
do not put it back in circulation.

Because the debug caches avoid all the fastpaths, reusing the frozen bit
to mark slab page with metadata corruption seems to be fine.

[ 4277.385669] list_del corruption, ffffea00044b3e50->next is LIST_POISON1 (dead000000000100)
[ 4277.387023] ------------[ cut here ]------------
[ 4277.387880] kernel BUG at lib/list_debug.c:56!
[ 4277.388680] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 4277.389562] CPU: 5 PID: 90 Comm: kworker/5:1 Kdump: loaded Tainted: G           OE      6.6.1-1 #1
[ 4277.392113] Workqueue: xfs-inodegc/vda1 xfs_inodegc_worker [xfs]
[ 4277.393551] RIP: 0010:__list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.394518] Code: 48 91 82 e8 37 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 28 49 91 82 e8 26 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 58 49 91
[ 4277.397292] RSP: 0018:ffffc90000333b38 EFLAGS: 00010082
[ 4277.398202] RAX: 000000000000004e RBX: ffffea00044b3e50 RCX: 0000000000000000
[ 4277.399340] RDX: 0000000000000002 RSI: ffffffff828f8715 RDI: 00000000ffffffff
[ 4277.400545] RBP: ffffea00044b3e40 R08: 0000000000000000 R09: ffffc900003339f0
[ 4277.401710] R10: 0000000000000003 R11: ffffffff82d44088 R12: ffff888112cf9910
[ 4277.402887] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8881000424c0
[ 4277.404049] FS:  0000000000000000(0000) GS:ffff88842fd40000(0000) knlGS:0000000000000000
[ 4277.405357] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4277.406389] CR2: 00007f2ad0b24000 CR3: 0000000102a3a006 CR4: 00000000007706e0
[ 4277.407589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4277.408780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4277.410000] PKRU: 55555554
[ 4277.410645] Call Trace:
[ 4277.411234]  <TASK>
[ 4277.411777]  ? die+0x32/0x80
[ 4277.412439]  ? do_trap+0xd6/0x100
[ 4277.413150]  ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.414158]  ? do_error_trap+0x6a/0x90
[ 4277.414948]  ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.415915]  ? exc_invalid_op+0x4c/0x60
[ 4277.416710]  ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.417675]  ? asm_exc_invalid_op+0x16/0x20
[ 4277.418482]  ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.419466]  ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.420410]  free_to_partial_list+0x515/0x5e0
[ 4277.421242]  ? xfs_iext_remove+0x41a/0xa10 [xfs]
[ 4277.422298]  xfs_iext_remove+0x41a/0xa10 [xfs]
[ 4277.423316]  ? xfs_inodegc_worker+0xb4/0x1a0 [xfs]
[ 4277.424383]  xfs_bmap_del_extent_delay+0x4fe/0x7d0 [xfs]
[ 4277.425490]  __xfs_bunmapi+0x50d/0x840 [xfs]
[ 4277.426445]  xfs_itruncate_extents_flags+0x13a/0x490 [xfs]
[ 4277.427553]  xfs_inactive_truncate+0xa3/0x120 [xfs]
[ 4277.428567]  xfs_inactive+0x22d/0x290 [xfs]
[ 4277.429500]  xfs_inodegc_worker+0xb4/0x1a0 [xfs]
[ 4277.430479]  process_one_work+0x171/0x340
[ 4277.431227]  worker_thread+0x277/0x390
[ 4277.431962]  ? __pfx_worker_thread+0x10/0x10
[ 4277.432752]  kthread+0xf0/0x120
[ 4277.433382]  ? __pfx_kthread+0x10/0x10
[ 4277.434134]  ret_from_fork+0x2d/0x50
[ 4277.434837]  ? __pfx_kthread+0x10/0x10
[ 4277.435566]  ret_from_fork_asm+0x1b/0x30
[ 4277.436280]  </TASK>

Fixes: 643b1138 ("slub: enable tracking of full slabs")
Suggested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: yuan.gao <yuan.gao@ucloud.cn>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0a726f542d7c8cc0f9c5ed7df5a4bd4b59ac21b3 upstream.

The suspend/resume functionality is currently broken on the i.MX6QDL
platform, as documented in the NXP errata (ERR005723):

  https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

This patch addresses the issue by sharing most of the suspend/resume
sequences used by other i.MX devices, while avoiding modifications to
critical registers that disrupt the PCIe functionality. It targets the
same problem as the following downstream commit:

  https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995

Unlike the downstream commit, this patch also resets the connected PCIe
device if possible. Without this reset, certain drivers, such as ath10k
or iwlwifi, will crash on resume. The device reset is also done by the
driver on other i.MX platforms, making this patch consistent with
existing practices.

Upon resuming, the kernel will hang and display an error. Here's an
example of the error encountered with the ath10k driver:

  ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible
  Unhandled fault: imprecise external abort (0x1406) at 0x0106f944

Without this patch, suspend/resume will fail on i.MX6QDL devices if a
PCIe device is connected.

Link: https://lore.kernel.org/r/20241030103250.83640-1-eichest@gmail.com


Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
[kwilczynski: commit log, added tag for stable releases]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8a47704d64c9afda80e7f399ba2cf898cfcc45b2 upstream.

Currently, the rproc "atomic_t power" variable is incremented during:
a. WPSS rproc auto boot.
b. AHB power on for ath11k.

During AHB power off (rmmod ath11k_ahb.ko), rproc_shutdown fails
to unload the WPSS firmware because the rproc->power value is '2',
causing the atomic_dec_and_test(&rproc->power) condition to fail.

Consequently, during AHB power on (insmod ath11k_ahb.ko),
QMI_WLANFW_HOST_CAP_REQ_V01 fails due to the host and firmware QMI
states being out of sync.

Fixes: 300ed425 ("remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS")
Cc: stable@vger.kernel.org
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241018105911.165415-1-quic_bpothuno@quicinc.com


Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4a159e6049f319bef6f9e6d2ccdd322f57d24830 upstream.

When do perf stat on sys metric, perf tool output nothing now:

  $ perf stat -a -M imx95_ddr_read.all -I 1000
  $

This command runs on an arm64 machine and the Soc has one DDR hw pmu
except one armv8_cortex_a55 pmu. Their maps show as follows:

const struct pmu_events_map pmu_events_map[] = {
{
	.arch = "arm64",
	.cpuid = "0x00000000410fd050",
	.event_table = {
		.pmus = pmu_events__arm_cortex_a55,
		.num_pmus = ARRAY_SIZE(pmu_events__arm_cortex_a55)
	},
	.metric_table = {
		.pmus = NULL,
		.num_pmus = 0
	}
},

static const struct pmu_sys_events pmu_sys_event_tables[] = {
{
	.event_table = {
		.pmus = pmu_events__freescale_imx95_sys,
		.num_pmus = ARRAY_SIZE(pmu_events__freescale_imx95_sys)
	},
	.metric_table = {
		.pmus = pmu_metrics__freescale_imx95_sys,
		.num_pmus = ARRAY_SIZE(pmu_metrics__freescale_imx95_sys)
	},
	.name = "pmu_events__freescale_imx95_sys",
},

Currently, pmu_metrics_table__find() will return NULL when only do perf
stat on sys metric. Then parse_groups() will never be called to parse
sys metric_name, finally perf tool will exit directly. This should be a
common problem.

To fix the issue, this will keep the logic before commit f20c15d1
("perf pmu-events: Remember the perf_events_map for a PMU") to return a
empty metric table rather than a NULL pointer.

This should be fine since the removed part just check if the table match
provided metric_name.  Without these code, the code in parse_groups()
will also check the validity of metrci_name too.

Fixes: f20c15d1 ("perf pmu-events: Remember the perf_events_map for a PMU")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241107162035.52206-2-irogers@google.com


Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fba6045161d686adc102b6ef71b2fd1e5f90a616 upstream.

Currently, the cfg_1_9_0 which is being used for X1E80100 doesn't disable
ASPM L0s. However, hardware team recommends to disable L0s as the PHY init
sequence is not tuned support L0s. Hence reuse cfg_sc8280xp for X1E80100.

Note that the config_sid() callback is not present in cfg_sc8280xp, don't
concern about this because config_sid() callback is originally a no-op
for X1E80100.

Fixes: 6d0c3932 ("PCI: qcom: Add X1E80100 PCIe support")
Link: https://lore.kernel.org/r/20241101030902.579789-5-quic_qianyu@quicinc.com


Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9283b7392570421c22a6c8058614f5b76a46b81c upstream.

The unsigned variable `size_t len` is cast to the signed type `loff_t`
when passed to the function check_add_overflow(). This function considers
the type of the destination, which is of type loff_t (signed),
potentially leading to an overflow. This issue is similar to the one
described in the link below.

Remove the cast.

Note that even if check_add_overflow() is bypassed, by setting `len` to
a value that is greater than LONG_MAX (which is considered as a negative
value after the cast), the function copy_from_user(), invoked a few lines
later, will not perform any copy and return `len` as (len > INT_MAX)
causing qat_vf_resume_write() to fail with -EFAULT.

Fixes: bb208810 ("vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices")
CC: stable@vger.kernel.org # 6.10+
Link: https://lore.kernel.org/all/138bd2e2-ede8-4bcc-aa7b-f3d9de167a37@moroto.mountain


Reported-by: Zijie Zhao <zzjas98@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Xin Zeng <xin.zeng@intel.com>
Link: https://lore.kernel.org/r/20241021123843.42979-1-giovanni.cabiddu@intel.com


Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 59c5e1411a0a13ebb930f4ebba495cc4eb14f8f2 upstream.

Set the initial eee_cfg values to have 'ethtool --show-eee ' display
the initial EEE configuration.

Fixes: 49168d19 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Cc: <stable@vger.kernel.org>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241120083818.1079456-1-yong.liang.choong@linux.intel.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 93ee385254d53849c01dd8ab9bc9d02790ee7f0e upstream.

The code for syncing vmalloc memory PGD pointers is using
atomic_read() in pair with atomic_set_release() but the
proper pairing is atomic_read_acquire() paired with
atomic_set_release().

This is done to clearly instruct the compiler to not
reorder the memcpy() or similar calls inside the section
so that we do not observe changes to init_mm. memcpy()
calls should be identified by the compiler as having
unpredictable side effects, but let's try to be on the
safe side.

Cc: stable@vger.kernel.org
Fixes: d31e23af ("ARM: mm: make vmalloc_seq handling SMP safe")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 44e9a3bb76e5f2eecd374c8176b2c5163c8bb2e2 upstream.

When switching task, in addition to a dummy read from the new
VMAP stack, also do a dummy read from the VMAP stack's
corresponding KASAN shadow memory to sync things up in
the new MM context.

Cc: stable@vger.kernel.org
Fixes: a1c510d0 ("ARM: implement support for vmap'ed stacks")
Link: https://lore.kernel.org/linux-arm-kernel/a1a1d062-f3a2-4d05-9836-3b098de9db6d@foss.st.com/


Reported-by: Clement LE GOFFIC <clement.legoffic@foss.st.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 45c9f2b856a075a34873d00788d2e8a250c1effd upstream.

The stack depot filters out everything outside of the top interrupt
context as an uninteresting or irrelevant part of the stack traces. This
helps with stack trace de-duplication, avoiding an explosion of saved
stack traces that share the same IRQ context code path but originate
from different randomly interrupted points, eventually exhausting the
stack depot.

Filtering uses in_irqentry_text() to identify functions within the
.irqentry.text and .softirqentry.text sections, which then become the
last stack trace entries being saved.

While __do_softirq() is placed into the .softirqentry.text section by
common code, populating .irqentry.text is architecture-specific.

Currently, the .irqentry.text section on s390 is empty, which prevents
stack depot filtering and de-duplication and could result in warnings
like:

Stack depot reached limit capacity
WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8

with PREEMPT and KASAN enabled.

Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into
the .irqentry.text section and updating the kprobes blacklist to include
the .irqentry.text section.

This is done only for asynchronous interrupts and explicitly not for
program checks, which are synchronous and where the context beyond the
program check is important to preserve. Despite machine checks being
somewhat in between, they are extremely rare, and preserving context
when possible is also of value.

SVCs and Restart Interrupts are not relevant, one being always at the
boundary to user space and the other being a one-time thing.

IRQ entries filtering is also optionally used in ftrace function graph,
where the same logic applies.

Cc: stable@vger.kernel.org # 5.15+
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d6e6a74d4cea853b5321eeabb69c611148eedefe upstream.

When sync:ing the VMALLOC area to other CPUs, make sure to also
sync the KASAN shadow memory for the VMALLOC area, so that we
don't get stale entries for the shadow memory in the top level PGD.

Since we are now copying PGDs in two instances, create a helper
function named memcpy_pgd() to do the actual copying, and
create a helper to map the addresses of VMALLOC_START and
VMALLOC_END into the corresponding shadow memory.

Co-developed-by: Melon Liu <melon1335@163.com>

Cc: stable@vger.kernel.org
Fixes: 565cbaad ("ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC")
Link: https://lore.kernel.org/linux-arm-kernel/a1a1d062-f3a2-4d05-9836-3b098de9db6d@foss.st.com/


Reported-by: Clement LE GOFFIC <clement.legoffic@foss.st.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 77adf4b1f3e1fdb319f7ee515e5924bb77df3916 upstream.

This loop requires explicit calls to of_node_put() upon early exits
(break, goto, return) to decrement the child refcounter and avoid memory
leaks if the child is not required out of the loop.

A more robust solution is using the scoped variant of the macro, which
automatically calls of_node_put() when the child goes out of scope.

Cc: stable@vger.kernel.org
Fixes: 97998737 ("spmi: pmic-arb: Add multi bus support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241001-spmi-pmic-arb-scoped-v1-1-5872bab34ed6@gmail.com


Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20241109002829.160973-2-sboyd@kernel.org


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bac3b10b78e54b7da3cede397258f75a2180609b upstream.

In attempting to optimize fw_devlink runtime, I introduced numerous cycle
detection bugs by foregoing cycle detection logic under specific
conditions. Each fix has further narrowed the conditions for optimization.

It's time to give up on these optimization attempts and just run the cycle
detection logic every time fw_devlink tries to create a device link.

The specific bug report that triggered this fix involved a supplier fwnode
that never gets a device created for it. Instead, the supplier fwnode is
represented by the device that corresponds to an ancestor fwnode.

In this case, fw_devlink didn't do any cycle detection because the cycle
detection logic is only run when a device link is created between the
devices that correspond to the actual consumer and supplier fwnodes.

With this change, fw_devlink will run cycle detection logic even when
creating SYNC_STATE_ONLY proxy device links from a device that is an
ancestor of a consumer fwnode.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Closes: https://lore.kernel.org/all/1a1ab663-d068-40fb-8c94-f0715403d276@ideasonboard.com/


Fixes: 6442d79d ("driver core: fw_devlink: Improve detection of overlapping cycles")
Cc: stable <stable@kernel.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241030171009.1853340-1-saravanak@google.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit da9596955c05966768364ab1cad2f43fcddc6f06 upstream.

The bin_attr_nvmem_write() must check the read_only flag and block
writes on read-only devices, now that a nvmem device can be switched
between read-write and read-only mode at runtime using the force_ro
attribute. Add the missing check.

Fixes: 9d7eb234 ("nvmem: core: Implement force_ro sysfs attribute")
Cc: Stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20241030140253.40445-2-srinivas.kandagatla@linaro.org


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c174b53e95adf2eece2afc56cd9798374919f99a upstream.

In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero.

Fixes: 9085daa4 ("staging: iio: ad7780: add gain & filter gpio support")
Cc: stable@vger.kernel.org
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241028142027.1032332-1-quzicheng@huawei.com


Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 36d202241d234fa4ac50743510d098ad52bd193a upstream.

The comment before the config of the GPLL3 PLL says that the
PLL should run at 930 MHz. In contrary to this, calculating
the frequency from the current configuration values by using
19.2 MHz as input frequency defined in 'qcs404.dtsi', it gives
921.6 MHz:

  $ xo=19200000; l=48; alpha=0x0; alpha_hi=0x0
  $ echo "$xo * ($((l)) + $(((alpha_hi << 32 | alpha) >> 8)) / 2^32)" | bc -l
  921600000.00000000000000000000

Set 'alpha_hi' in the configuration to a value used in downstream
kernels [1][2] in order to get the correct output rate:

  $ xo=19200000; l=48; alpha=0x0; alpha_hi=0x70
  $ echo "$xo * ($((l)) + $(((alpha_hi << 32 | alpha) >> 8)) / 2^32)" | bc -l
  930000000.00000000000000000000

The change is based on static code analysis, compile tested only.

[1] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/kernel.lnx.5.4.r56-rel/drivers/clk/qcom/gcc-qcs404.c?ref_type=heads#L335
[2} https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r49-rel/drivers/clk/qcom/gcc-qcs404.c?ref_type=heads#L127



Cc: stable@vger.kernel.org
Fixes: 652f1813 ("clk: qcom: gcc: Add global clock controller driver for QCS404")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241022-fix-gcc-qcs404-gpll3-v1-1-c4d30d634d19@gmail.com


Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c776a54d9ef3e945db2fe407ad6ad4525422943 upstream.

Include free_cpufreq_table in the cleanup path when boost enablement fails.

cc: stable@vger.kernel.org
Fixes: a8e949d4 ("cpufreq: scmi: Enable boost support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d677ce521334d8f1f327cafc8b1b7854b0833158 upstream.

Under certain conditions, the 64-bit '-mstack-protector-guard' flags may
end up in the 32-bit vDSO flags, resulting in build failures due to the
structure of clang's argument parsing of the stack protector options,
which validates the arguments of the stack protector guard flags
unconditionally in the frontend, choking on the 64-bit values when
targeting 32-bit:

  clang: error: invalid value 'r13' in 'mstack-protector-guard-reg=', expected one of: r2
  clang: error: invalid value 'r13' in 'mstack-protector-guard-reg=', expected one of: r2
  make[3]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1
  make[3]: *** [arch/powerpc/kernel/vdso/Makefile:87: arch/powerpc/kernel/vdso/vgetrandom-32.o] Error 1

Remove these flags by adding them to the CC32FLAGSREMOVE variable, which
already handles situations similar to this. Additionally, reformat and
align a comment better for the expanding CONFIG_CC_IS_CLANG block.

Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030-powerpc-vdso-drop-stackp-flags-clang-v1-1-d95e7376d29c@kernel.org


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f3c7a1ede435e2e45177d7a490a85fb0a0ec96d1 upstream.

Patch series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()".  v2.

According to the logic of damon_va_evenly_split_region(), currently
following split case would not meet the expectation:

  Suppose DAMON_MIN_REGION=0x1000,
  Case: Split [0x0, 0x3000) into 2 pieces, then the result would be
        acutually 3 regions:
          [0x0, 0x1000), [0x1000, 0x2000), [0x2000, 0x3000)
        but NOT the expected 2 regions:
          [0x0, 0x1000), [0x1000, 0x3000) !!!

The root cause is that when calculating size of each split piece in
damon_va_evenly_split_region():

  `sz_piece = ALIGN_DOWN(sz_orig / nr_pieces, DAMON_MIN_REGION);`

both the dividing and the ALIGN_DOWN may cause loss of precision, then
each time split one piece of size 'sz_piece' from origin 'start' to 'end'
would cause more pieces are split out than expected!!!

To fix it, count for each piece split and make sure no more than
'nr_pieces'.  In addition, add above case into damon_test_split_evenly().

And add 'nr_piece == 1' check in damon_va_evenly_split_region() for better
code readability and add a corresponding kunit testcase.


This patch (of 2):

According to the logic of damon_va_evenly_split_region(), currently
following split case would not meet the expectation:

  Suppose DAMON_MIN_REGION=0x1000,
  Case: Split [0x0, 0x3000) into 2 pieces, then the result would be
        acutually 3 regions:
          [0x0, 0x1000), [0x1000, 0x2000), [0x2000, 0x3000)
        but NOT the expected 2 regions:
          [0x0, 0x1000), [0x1000, 0x3000) !!!

The root cause is that when calculating size of each split piece in
damon_va_evenly_split_region():

  `sz_piece = ALIGN_DOWN(sz_orig / nr_pieces, DAMON_MIN_REGION);`

both the dividing and the ALIGN_DOWN may cause loss of precision,
then each time split one piece of size 'sz_piece' from origin 'start' to
'end' would cause more pieces are split out than expected!!!

To fix it, count for each piece split and make sure no more than
'nr_pieces'. In addition, add above case into damon_test_split_evenly().

After this patch, damon-operations test passed:

 # ./tools/testing/kunit/kunit.py run damon-operations
 [...]
 ============== damon-operations (6 subtests) ===============
 [PASSED] damon_test_three_regions_in_vmas
 [PASSED] damon_test_apply_three_regions1
 [PASSED] damon_test_apply_three_regions2
 [PASSED] damon_test_apply_three_regions3
 [PASSED] damon_test_apply_three_regions4
 [PASSED] damon_test_split_evenly
 ================ [PASSED] damon-operations =================

Link: https://lkml.kernel.org/r/20241022083927.3592237-1-zhengyejian@huaweicloud.com
Link: https://lkml.kernel.org/r/20241022083927.3592237-2-zhengyejian@huaweicloud.com


Fixes: 3f49584b ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Fernand Sieber <sieberf@amazon.com>
Cc: Leonard Foerster <foersleo@amazon.de>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Ye Weihua <yeweihua4@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 09b1ef9813a0742674f7efe26104403ca94a1b4a upstream.

Since commit 92a81562 ("leds: lp55xx: Add multicolor framework
support to lp55xx") there are two subsequent tests if the chan_nr
(reg property) is in valid range. One in the lp55xx_init_led()
function and one in the lp55xx_parse_common_child() function that
was added with the mentioned commit.

There are two issues with that.

First is in the lp55xx_parse_common_child() function where the reg
property is tested right after it is read from the device tree.
Test for the upper range is not correct though. Valid reg values are
0 to (max_channel - 1) so it should be >=.

Second issue is that in case the parsed value is out of the range
the probe just fails and no error message is shown as the code never
reaches the second test that prints and error message.

Remove the test form lp55xx_parse_common_child() function completely
and keep the one in lp55xx_init_led() function to deal with it.

Fixes: 92a81562 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Link: https://lore.kernel.org/r/20241017150812.3563629-1-michal.vokac@ysoft.com


Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 229e6ee43d2a160a1592b83aad620d6027084aad upstream.

Null pointer dereference occurs due to a race between smmu
driver probe and client driver probe, when of_dma_configure()
for client is called after the iommu_device_register() for smmu driver
probe has executed but before the driver_bound() for smmu driver
has been called.

Following is how the race occurs:

T1:Smmu device probe		T2: Client device probe

really_probe()
arm_smmu_device_probe()
iommu_device_register()
					really_probe()
					platform_dma_configure()
					of_dma_configure()
					of_dma_configure_id()
					of_iommu_configure()
					iommu_probe_device()
					iommu_init_device()
					arm_smmu_probe_device()
					arm_smmu_get_by_fwnode()
						driver_find_device_by_fwnode()
						driver_find_device()
						next_device()
						klist_next()
						    /* null ptr
						       assigned to smmu */
					/* null ptr dereference
					   while smmu->streamid_mask */
driver_bound()
	klist_add_tail()

When this null smmu pointer is dereferenced later in
arm_smmu_probe_device, the device crashes.

Fix this by deferring the probe of the client device
until the smmu device has bound to the arm smmu driver.

Fixes: 021bb842 ("iommu/arm-smmu: Wire up generic configuration support")
Cc: stable@vger.kernel.org
Co-developed-by: Prakash Gupta <quic_guptap@quicinc.com>
Signed-off-by: Prakash Gupta <quic_guptap@quicinc.com>
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>
Link: https://lore.kernel.org/r/20241004090428.2035-1-quic_pbrahma@quicinc.com


[will: Add comment]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d71fa842d33c48ac2809ae11d2379b5a788792cb upstream.

ARM_LPAE_LVL_IDX() takes into account concatenated PGDs and can return
an index spanning multiple page-table pages given a sufficiently large
input address. However, when the resulting index is used to calculate
the number of remaining entries in the page, the possibility of
concatenation is ignored and we end up computing a negative upper bound:

	max_entries = ARM_LPAE_PTES_PER_TABLE(data) - map_idx_start;

On the map path, this results in a negative 'mapped' value being
returned but on the unmap path we can leak child tables if they are
skipped in __arm_lpae_free_pgtable().

Introduce an arm_lpae_max_entries() helper to convert a table index into
the remaining number of entries within a single page-table page.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241024162516.2005652-2-smostafa@google.com


[will: Tweaked comment and commit message]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f85219096648b251a81e9fe24a1974590cfc417d upstream.

Patch series "zram: IDLE flag handling fixes", v2.

zram can wrongly preserve ZRAM_IDLE flag on its entries which can result
in premature post-processing (writeback and recompression) of such
entries.

This patch (of 2)

Recompression should clear ZRAM_IDLE flag on the entries it has accessed,
because otherwise some entries, specifically those for which recompression
has failed, become immediate candidate entries for another post-processing
(e.g.  writeback).

Consider the following case:
- recompression marks entries IDLE every 4 hours and attempts
  to recompress them
- some entries are incompressible, so we keep them intact and
  hence preserve IDLE flag
- writeback marks entries IDLE every 8 hours and writebacks
  IDLE entries, however we have IDLE entries left from
  recompression, so writeback prematurely writebacks those
  entries.

The bug was reported by Shin Kawamura.

Link: https://lkml.kernel.org/r/20241028153629.1479791-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20241028153629.1479791-2-senozhatsky@chromium.org


Fixes: 84b33bf7 ("zram: introduce recompress sysfs knob")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Shin Kawamura <kawasin@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2ea80b039b9af0b71c00378523b71c254fb99c23 upstream.

Since 5.14-rc1, NUMA events will only be folded from per-CPU statistics to
per zone and global statistics when the user actually needs it.

Currently, the kernel has performs the fold operation when reading
/proc/vmstat, but does not perform the fold operation in /proc/zoneinfo.
This can lead to inaccuracies in the following statistics in zoneinfo:
- numa_hit
- numa_miss
- numa_foreign
- numa_interleave
- numa_local
- numa_other

Therefore, before printing per-zone vm_numa_event when reading
/proc/zoneinfo, we should also perform the fold operation.

Link: https://lkml.kernel.org/r/1730433998-10461-1-git-send-email-mengensun@tencent.com


Fixes: f19298b9 ("mm/vmstat: convert NUMA statistics to basic NUMA counters")
Signed-off-by: MengEn Sun <mengensun@tencent.com>
Reviewed-by: JinLiang Zheng <alexjlzheng@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 45af52e7d3b8560f21d139b3759735eead8b1653 upstream.

When executing the following command:

    # echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter

The current mod command causes a null pointer dereference. While commit
0f179765 ("ftrace: Fix regression with module command in stack_trace_filter")
has addressed part of the issue, it left a corner case unhandled, which still
results in a kernel crash.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241120052750.275463-1-guoweikang.kernel@gmail.com


Fixes: 04ec7bb6 ("tracing: Have the trace_array hold the list of registered func probes");
Signed-off-by: guoweikang <guoweikang.kernel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0ea120b278ad7f7cfeeb606e150ad04b192df60b upstream.

Currently, when storing NULL on mas_store_root(), the behavior could be
improved.

Storing NULLs over the entire tree may result in a node being used to
store a single range.  Further stores of NULL may cause the node and
tree to be corrupt and cause incorrect behaviour.  Fixing the store to
the root null fixes the issue by ensuring that a range of 0 - ULONG_MAX
results in an empty tree.

Users of the tree may experience incorrect values returned if the tree
was expanded to store values, then overwritten by all NULLS, then
continued to store NULLs over the empty area.

For example possible cases are:

  * store NULL at any range result a new node
  * store NULL at range [m, n] where m > 0 to a single entry tree result
    a new node with range [m, n] set to NULL
  * store NULL at range [m, n] where m > 0 to an empty tree result
    consecutive NULL slot
  * it allows for multiple NULL entries by expanding root
    to store NULLs to an empty tree

This patch tries to improve in:

  * memory efficient by setting to empty tree instead of using a node
  * remove the possibility of consecutive NULL slot which will prohibit
    extended null in later operation

Link: https://lkml.kernel.org/r/20241031231627.14316-5-richard.weiyang@gmail.com


Fixes: 54a611b6 ("Maple Tree: add new data structure")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c8b359dddb418c60df1a69beea01d1b3322bfe83 upstream.

Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack.

Reported-by:  <syzbot+a8c9d476508bd14a90e5@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=a8c9d476508bd14a90e5


Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/linux-unionfs/CAJfpegvx-oS9XGuwpJx=Xe28_jzWx5eRo1y900_ZzWY+=gGzUg@mail.gmail.com/


Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 39e21403c978862846fa68b7f6d06f9cca235194 upstream.

In kunit_debugfs_create_suite(), if alloc_string_stream() fails in the
kunit_suite_for_each_test_case() loop, the "suite->log = stream"
has assigned before, and the error path only free the suite->log's stream
memory but not set it to NULL, so the later string_stream_clear() of
suite->log in kunit_init_suite() will cause below UAF bug.

Set stream pointer to NULL after free to fix it.

	Unable to handle kernel paging request at virtual address 006440150000030d
	Mem abort info:
	  ESR = 0x0000000096000004
	  EC = 0x25: DABT (current EL), IL = 32 bits
	  SET = 0, FnV = 0
	  EA = 0, S1PTW = 0
	  FSC = 0x04: level 0 translation fault
	Data abort info:
	  ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
	  CM = 0, WnR = 0, TnD = 0, TagAccess = 0
	  GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
	[006440150000030d] address between user and kernel address ranges
	Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
	Dumping ftrace buffer:
	   (ftrace buffer empty)
	Modules linked in: iio_test_gts industrialio_gts_helper cfg80211 rfkill ipv6 [last unloaded: iio_test_gts]
	CPU: 5 UID: 0 PID: 6253 Comm: modprobe Tainted: G    B   W        N 6.12.0-rc4+ #458
	Tainted: [B]=BAD_PAGE, [W]=WARN, [N]=TEST
	Hardware name: linux,dummy-virt (DT)
	pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
	pc : string_stream_clear+0x54/0x1ac
	lr : string_stream_clear+0x1a8/0x1ac
	sp : ffffffc080b47410
	x29: ffffffc080b47410 x28: 006440550000030d x27: ffffff80c96b5e98
	x26: ffffff80c96b5e80 x25: ffffffe461b3f6c0 x24: 0000000000000003
	x23: ffffff80c96b5e88 x22: 1ffffff019cdf4fc x21: dfffffc000000000
	x20: ffffff80ce6fa7e0 x19: 032202a80000186d x18: 0000000000001840
	x17: 0000000000000000 x16: 0000000000000000 x15: ffffffe45c355cb4
	x14: ffffffe45c35589c x13: ffffffe45c03da78 x12: ffffffb810168e75
	x11: 1ffffff810168e74 x10: ffffffb810168e74 x9 : dfffffc000000000
	x8 : 0000000000000004 x7 : 0000000000000003 x6 : 0000000000000001
	x5 : ffffffc080b473a0 x4 : 0000000000000000 x3 : 0000000000000000
	x2 : 0000000000000001 x1 : ffffffe462fbf620 x0 : dfffffc000000000
	Call trace:
	 string_stream_clear+0x54/0x1ac
	 __kunit_test_suites_init+0x108/0x1d8
	 kunit_exec_run_tests+0xb8/0x100
	 kunit_module_notify+0x400/0x55c
	 notifier_call_chain+0xfc/0x3b4
	 blocking_notifier_call_chain+0x68/0x9c
	 do_init_module+0x24c/0x5c8
	 load_module+0x4acc/0x4e90
	 init_module_from_file+0xd4/0x128
	 idempotent_init_module+0x2d4/0x57c
	 __arm64_sys_finit_module+0xac/0x100
	 invoke_syscall+0x6c/0x258
	 el0_svc_common.constprop.0+0x160/0x22c
	 do_el0_svc+0x44/0x5c
	 el0_svc+0x48/0xb8
	 el0t_64_sync_handler+0x13c/0x158
	 el0t_64_sync+0x190/0x194
	Code: f9400753 d2dff800 f2fbffe0 d343fe7c (38e06b80)
	---[ end trace 0000000000000000 ]---
	Kernel panic - not syncing: Oops: Fatal exception

Link: https://lore.kernel.org/r/20241112080314.407966-1-ruanjinjie@huawei.com


Cc: stable@vger.kernel.org
Fixes: a3fdf784 ("kunit: string-stream: Decouple string_stream from kunit")
Suggested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 435c20eed572a95709b1536ff78832836b2f91b1 upstream.

kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add a NULL check for test_state.

Link: https://lore.kernel.org/r/20241115054335.21673-1-zichenxie0106@gmail.com


Fixes: d03c720e ("kunit: Add APIs for managing devices")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c54a1a06daa78613519b4d24495b0d175b8af63f upstream.

Since the new fgraph requires to initialize fgraph_ops.ops.func_hash before
calling register_ftrace_graph(), initialize it with default (tracing all
functions) parameter.

Cc: stable@vger.kernel.org
Fixes: 5fccc755 ("ftrace: Add subops logic to allow one ops to manage many")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3dd075fe8ebbc6fcbf998f81a75b8c4b159a6195 upstream.

Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero
unique ID.

```
Each Unit and Terminal within the video function is assigned a unique
identification number, the Unit ID (UID) or Terminal ID (TID), contained in
the bUnitID or bTerminalID field of the descriptor. The value 0x00 is
reserved for undefined ID,
```

So, deny allocating an entity with ID 0 or an ID that belongs to a unit
that is already added to the list of entities.

This also prevents some syzkaller reproducers from triggering warnings due
to a chain of entities referring to themselves. In one particular case, an
Output Unit is connected to an Input Unit, both with the same ID of 1. But
when looking up for the source ID of the Output Unit, that same entity is
found instead of the input entity, which leads to such warnings.

In another case, a backward chain was considered finished as the source ID
was 0. Later on, that entity was found, but its pads were not valid.

Here is a sample stack trace for one of those cases.

[   20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   20.830206] usb 1-1: Using ep0 maxpacket: 8
[   20.833501] usb 1-1: config 0 descriptor??
[   21.038518] usb 1-1: string descriptor 0 read error: -71
[   21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201)
[   21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized!
[   21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized!
[   21.042218] ------------[ cut here ]------------
[   21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0
[   21.043195] Modules linked in:
[   21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444
[   21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[   21.044639] Workqueue: usb_hub_wq hub_event
[   21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0
[   21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00
[   21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246
[   21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1
[   21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290
[   21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000
[   21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003
[   21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000
[   21.049648] FS:  0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[   21.050271] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0
[   21.051136] PKRU: 55555554
[   21.051331] Call Trace:
[   21.051480]  <TASK>
[   21.051611]  ? __warn+0xc4/0x210
[   21.051861]  ? media_create_pad_link+0x2c4/0x2e0
[   21.052252]  ? report_bug+0x11b/0x1a0
[   21.052540]  ? trace_hardirqs_on+0x31/0x40
[   21.052901]  ? handle_bug+0x3d/0x70
[   21.053197]  ? exc_invalid_op+0x1a/0x50
[   21.053511]  ? asm_exc_invalid_op+0x1a/0x20
[   21.053924]  ? media_create_pad_link+0x91/0x2e0
[   21.054364]  ? media_create_pad_link+0x2c4/0x2e0
[   21.054834]  ? media_create_pad_link+0x91/0x2e0
[   21.055131]  ? _raw_spin_unlock+0x1e/0x40
[   21.055441]  ? __v4l2_device_register_subdev+0x202/0x210
[   21.055837]  uvc_mc_register_entities+0x358/0x400
[   21.056144]  uvc_register_chains+0x1fd/0x290
[   21.056413]  uvc_probe+0x380e/0x3dc0
[   21.056676]  ? __lock_acquire+0x5aa/0x26e0
[   21.056946]  ? find_held_lock+0x33/0xa0
[   21.057196]  ? kernfs_activate+0x70/0x80
[   21.057533]  ? usb_match_dynamic_id+0x1b/0x70
[   21.057811]  ? find_held_lock+0x33/0xa0
[   21.058047]  ? usb_match_dynamic_id+0x55/0x70
[   21.058330]  ? lock_release+0x124/0x260
[   21.058657]  ? usb_match_one_id_intf+0xa2/0x100
[   21.058997]  usb_probe_interface+0x1ba/0x330
[   21.059399]  really_probe+0x1ba/0x4c0
[   21.059662]  __driver_probe_device+0xb2/0x180
[   21.059944]  driver_probe_device+0x5a/0x100
[   21.060170]  __device_attach_driver+0xe9/0x160
[   21.060427]  ? __pfx___device_attach_driver+0x10/0x10
[   21.060872]  bus_for_each_drv+0xa9/0x100
[   21.061312]  __device_attach+0xed/0x190
[   21.061812]  device_initial_probe+0xe/0x20
[   21.062229]  bus_probe_device+0x4d/0xd0
[   21.062590]  device_add+0x308/0x590
[   21.062912]  usb_set_configuration+0x7b6/0xaf0
[   21.063403]  usb_generic_driver_probe+0x36/0x80
[   21.063714]  usb_probe_device+0x7b/0x130
[   21.063936]  really_probe+0x1ba/0x4c0
[   21.064111]  __driver_probe_device+0xb2/0x180
[   21.064577]  driver_probe_device+0x5a/0x100
[   21.065019]  __device_attach_driver+0xe9/0x160
[   21.065403]  ? __pfx___device_attach_driver+0x10/0x10
[   21.065820]  bus_for_each_drv+0xa9/0x100
[   21.066094]  __device_attach+0xed/0x190
[   21.066535]  device_initial_probe+0xe/0x20
[   21.066992]  bus_probe_device+0x4d/0xd0
[   21.067250]  device_add+0x308/0x590
[   21.067501]  usb_new_device+0x347/0x610
[   21.067817]  hub_event+0x156b/0x1e30
[   21.068060]  ? process_scheduled_works+0x48b/0xaf0
[   21.068337]  process_scheduled_works+0x5a3/0xaf0
[   21.068668]  worker_thread+0x3cf/0x560
[   21.068932]  ? kthread+0x109/0x1b0
[   21.069133]  kthread+0x197/0x1b0
[   21.069343]  ? __pfx_worker_thread+0x10/0x10
[   21.069598]  ? __pfx_kthread+0x10/0x10
[   21.069908]  ret_from_fork+0x32/0x40
[   21.070169]  ? __pfx_kthread+0x10/0x10
[   21.070424]  ret_from_fork_asm+0x1a/0x30
[   21.070737]  </TASK>

Cc: stable@vger.kernel.org
Reported-by:  <syzbot+0584f746fde3d52b4675@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0584f746fde3d52b4675


Reported-by:  <syzbot+dd320d114deb3f5bb79b@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=dd320d114deb3f5bb79b


Fixes: a3fbc2e6 ("media: mc-entity.c: use WARN_ON, validate link pads")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240913180601.1400596-2-cascardo@igalia.com


Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9ec6f1736363b2b2bb4e266997389740f628441 upstream.

uvc_unregister_video() can be called asynchronously from
uvc_disconnect(). If the device is still streaming when that happens, a
plethora of race conditions can occur.

Make sure that the device has stopped streaming before exiting this
function.

If the user still holds handles to the driver's file descriptors, any
ioctl will return -ENODEV from the v4l2 core.

This change makes uvc more consistent with the rest of the v4l2 drivers
using the vb2_fop_* and vb2_ioctl_* helpers.

This driver (and many other usb drivers) always had this problem, but it
wasn't possible to easily fix this until the vb2_video_unregister_device()
helper was added. So the Fixes tag points to the creation of that helper.

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes: f729ef57 ("media: videobuf2-v4l2.c: add vb2_video_unregister_device helper function")
Cc: stable@vger.kernel.org # 5.10.x
[hverkuil: add note regarding Fixes version]
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0f514068fbc5d4d189c817adc7c4e32cffdc2e47 upstream.

The buffer in the loop should be released under the exception path,
otherwise there may be a memory leak here.

To mitigate this, free the buffer when allegro_alloc_buffer fails.

Fixes: f20387df ("media: allegro: add Allegro DVT video IP core driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d0fef6de4f1b957e35a05a5ba4aab2a2576d6686 upstream.

It is necessary to account for I2C quirks in the burst mode path of this
driver. Not all I2C controllers can accept arbitrarily long writes and this
is represented in the quirks field of the adapter structure.

Prior to this patch the following error message is seen on a Qualcomm
X1E80100 CRD.

[   38.773524] i2c i2c-2: adapter quirk: msg too long (addr 0x0036, size 290, write)
[   38.781454] ov08x40 2-0036: Failed regs transferred: -95
[   38.787076] ov08x40 2-0036: ov08x40_start_streaming failed to set regs

Fix the error by breaking up the write sequence into the advertised maximum
write size of the quirks field if the quirks field is populated.

Fixes: 8f667d20 ("media: ov08x40: Reduce start streaming time")
Cc: stable@vger.kernel.org # v6.9+
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d2842dec577900031826dc44e9bf0c66416d7173 upstream.

In set_frame_rate(), select a rate in rate_0 or rate_1 by checking
sd->frame_rate >= r->fps in a loop, but the loop condition terminates when
the index reaches zero, which fails to check the last elememt in rate_0 or
rate_1.

Check for >= 0 so that the last one in rate_0 or rate_1 is also checked.

Fixes: 189d92af ("V4L/DVB (13422): gspca - ov534: ov772x changes from Richard Kaswy.")
Cc: stable@vger.kernel.org
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2a20869f7d798aa2b69e45b863eaf1b1ecf98278 upstream.

It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.

Cc: stable@vger.kernel.org
Fixes: af2c3834 ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 316e74500d1c6589cba28cebe2864a0bceeb2396 upstream.

It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.

Cc: stable@vger.kernel.org
Fixes: b50a64fc ("media: amphion: add amphion vpu device driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 378e8feea9a70d37a5dc1678b7ec27df21099fa5 upstream.

The DP83869 PHY transceiver supports converting from RGMII to 1000base-x.
In this operation mode, autonegotiation can be performed, as described in
IEEE802.3.

The DP83869 has a set of fiber-specific registers located at offset 0xc00.
When the transceiver is configured in RGMII-to-1000base-x mode, these
registers are mapped onto offset 0, which should make reading the
autonegotiation status transparent.

However, the fiber registers at offset 0xc04 and 0xc05 follow the bit
layout specified in Clause 37, and genphy_read_status() assumes a Clause 22
layout. Thus, genphy_read_status() doesn't properly read the capabilities
advertised by the link partner, resulting in incorrect link parameters.

Similarly, genphy_config_aneg() doesn't properly write advertised
capabilities.

Fix the 1000base-x autonegotiation procedure by replacing
genphy_read_status() and genphy_config_aneg() with their Clause 37
equivalents.

Fixes: a29de52b ("net: dp83869: Add ability to advertise Fiber connection")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20241112-dp83869-1000base-x-v3-1-36005f4ab0d9@bootlin.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 06d39d79cbd5a91a33707951ebf2512d0e759847 upstream.

cmdline_ptr is an out parameter, which is not allocated by the function
itself, and likely points into the caller's stack.

cmdline refers to the pool allocation that should be freed when cleaning
up after a failure, so pass this instead to free_pool().

Fixes: 42c8ea3d ("efi: libstub: Factor out EFI stub entrypoint ...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8964eb23408243ae0016d1f8473c76f64ff25d20 upstream.

In fimc_md_is_isp_available(), of_get_child_by_name() is called to check
if FIMC-IS is available. Current code does not decrement the refcount of
the returned device node, which causes an OF node reference leak. Fix it
by calling of_node_put() at the end of the variable scope.

Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Fixes: e781bbe3 ("[media] exynos4-is: Add fimc-is subdevs registration")
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: added CC to stable]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>