- Dec 05, 2024
-
-
Krzysztof Kozlowski authored
commit ffb30875172eabff727e2896f097ccd4bb68723f upstream. Commit 904140fa ("dt-bindings: pinctrl: samsung: use Exynos7 fallbacks for newer wake-up controllers") added samsung,exynos7-wakeup-eint fallback to some compatibles, so the intention in the if:then: conditions was to handle the cases: 1. Single Exynos7 compatible or Exynos5433+Exynos7 or Exynos7885+Exynos7: only one interrupt 2. Exynos850+Exynos7: no interrupts This was not implemented properly however and if:then: block matches only single Exynos5433 or Exynos7885 compatibles, which do not exist in DTS anymore, so basically is a no-op and no enforcement on number of interrupts is made by the binding. Fix the if:then: condition so interrupts in the Exynos5433 and Exynos7885 wake-up pin controller will be properly constrained. Fixes: 904140fa ("dt-bindings: pinctrl: samsung: use Exynos7 fallbacks for newer wake-up controllers") Cc: stable@vger.kernel.org Acked-by:
Rob Herring (Arm) <robh@kernel.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241015065848.29429-1-krzysztof.kozlowski@linaro.org Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fei Shao authored
[ Upstream commit 5efa23224bf573d4bceb51bc646dd67b6ccb83b5 ] In MediaTek PCIe gen3 bindings, "clocks" accepts a range of 1-6 clocks across all SoCs. But in practice, each SoC requires a particular number of clocks as defined in "clock-names", and the length of "clocks" and "clock-names" can be inconsistent with current bindings. For example: - MT8188, MT8192 and MT8195 all require 6 clocks, while the bindings accept 4-6 clocks. - MT7986 requires 4 clocks, while the bindings accept 4-6 clocks. Update minItems and maxItems properties for individual SoCs as needed to only accept the correct number of clocks. Fixes: c6abd0ea ("dt-bindings: PCI: mediatek-gen3: Add support for Airoha EN7581") Link: https://lore.kernel.org/r/20240925110044.3678055-3-fshao@chromium.org Signed-off-by:Fei Shao <fshao@chromium.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nuno Sa authored
[ Upstream commit 47f3f5a82a31527e027929c5cec3dd1ef5ef30f5 ] In order to access the registers of the HW, we need to make sure that the AXI bus clock is enabled. Hence let's increase the number of clocks by one and add clock-names to differentiate between parent clocks and the bus clock. Fixes: 0e646c52 ("clk: Add axi-clkgen driver") Signed-off-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-1-bc5e0733ad76@analog.com Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Macpaul Lin authored
[ Upstream commit 4649cbd97fdae5069e9a71cd7669b62b90e03669 ] Some fix and updates in the following items: 1. examples: Update generic node name to 'audio-codec' to comply with the coming change in 'mt6359.dtsi'. This change is necessary to fix the dtbs_check error: pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+' 2. mediatek,dmic-mode: After inspecting the .dts and .dtsi files using 'mt6359-codec', it was discovered that the definitions of 'two wires' and 'one wire' are inverted compared to the DT schema. For example, the following boards using MT6359 PMIC: - mt8192-asurada.dtsi - mt8195-cherry.dtsi These boards use the same definitions of 'dmic-mode' as other boards using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments in the device trees. Upon examining the code in [1] and [2], it was confirmed that the definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and "MT6358 PMIC". Therefore, the DT Schema should be correct as is. References: [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515 Fixes: 539237d1 ("dt-bindings: mediatek: mt6359: add codec document") Signed-off-by:Jiaxin Yu <jiaxin.yu@mediatek.com> Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Igor Prusov authored
[ Upstream commit 5d9e6d6fc1b98c8c22d110ee931b3b233d43cd13 ] Add vendor prefix for NeoFidelity, Inc Signed-off-by:
Igor Prusov <ivprusov@salutedevices.com> Acked-by:
-
Abel Vesa authored
[ Upstream commit f9759e2b57049f9c4ea8d7254ba6afcf6eb10cd6 ] Document the missing Broadcast_AND region for x1e80100. Fixes: e9ceb595 ("dt-bindings: cache: qcom,llcc: Add X1E80100 compatible") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410181235.L7MF7z48-lkp@intel.com/ Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
-
- Nov 02, 2024
-
-
Suraj Gupta authored
Correct phy-mode property value to 1000base-x. Fixes: cbb1ca6d ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml") Signed-off-by:
Suraj Gupta <suraj.gupta2@amd.com> Reviewed-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Jakub Kicinski <kuba@kernel.org>
-
- Oct 29, 2024
-
-
Dmitry Yashin authored
Fix DTB warnings when rk3308-codec used with audio-graph-card by documenting port property: codec@ff560000: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
Dmitry Yashin <dmt.yashin@gmail.com> Reviewed-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patch.msgid.link/20241028213314.476776-2-dmt.yashin@gmail.com Signed-off-by:
-
- Oct 28, 2024
-
-
Cristian Marussi authored
Recently introduced max-rx-timeout-ms optionao property is missing a vendor prefix. Add the vendor prefix so that it aligns with the new properties that are about to get added soon. Fixes: 3a5e6ab0 ("dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms") Signed-off-by:
Cristian Marussi <cristian.marussi@arm.com> Message-Id: <20241028120151.1301177-7-cristian.marussi@arm.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com>
-
- Oct 24, 2024
-
-
Julien Stephan authored
ad7380-4 is the only device from ad738x family that doesn't have an internal reference. Moreover its external reference is called REFIN in the datasheet while all other use REFIO as an optional external reference. If refio-supply is omitted the internal reference is used. Fix the binding by adding refin-supply and makes it required for ad7380-4 only. Fixes: 1a291cc8 ("dt-bindings: iio: adc: ad7380: add support for ad738x-4 4 channels variants") Acked-by:
David Lechner <dlechner@baylibre.com> Signed-off-by:
Julien Stephan <jstephan@baylibre.com> Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-1-f0cefe1b7fa6@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- Oct 23, 2024
-
-
Moudy Ho authored
The display node in mt8195.dtsi was triggering a CHECK_DTBS error due to an excessively long 'clocks' property: display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long To resolve this issue, the constraints for 'clocks' and other properties within the subschemas will be reinforced. Fixes: 739058a9 ("dt-bindings: display: mediatek: split: add compatible for MT8195") Signed-off-by:
Moudy Ho <moudy.ho@mediatek.com> Reviewed-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org>
-
Macpaul Lin authored
The MediaTek DPI module is typically associated with one of the following multimedia power domains: - POWER_DOMAIN_DISPLAY - POWER_DOMAIN_VDOSYS - POWER_DOMAIN_MM The specific power domain used varies depending on the SoC design. These power domains are shared by multiple devices within the SoC. In most cases, these power domains are enabled by other devices. As a result, the DPI module of legacy SoCs often functions correctly even without explicit configuration. It is recommended to explicitly add the appropriate power domain property to the DPI node in the device tree. Hence drop the compatible checking for specific SoCs. Fixes: 5474d49b ("dt-bindings: display: mediatek: dpi: Add power domains") Signed-off-by:
Jitao Shi <jitao.shi@mediatek.com> Signed-off-by:
Pablo Sun <pablo.sun@mediatek.com> Reviewed-by:
-
- Oct 21, 2024
-
-
Abel Vesa authored
The PCIe 6a PHY is actually Gen4 4-lanes capable. So the gen4x4 compatible describes it. But according to the schema, currently the gen4x4 compatible doesn't require both PHY and PHY-nocsr resets, while the HW does. So fix that by adding the gen4x4 compatible alongside the gen4x2 one for the resets description. Fixes: 0c5f4d23 ("dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4") Reported-by:
Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org>
-
- Oct 17, 2024
-
-
Johan Hovold authored
The x1e80100 QMP PCIe PHYs all have a pipediv2 clock that needs to be described. Fixes: e94b29f2 ("dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHYs") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by:
-
- Oct 16, 2024
-
-
Linus Walleij authored
The MDIO block in the BCM6846 is not identical to any of the previous versions, but has extended registers not present in the other variants. For this reason we need to use a new compatible especially for this SoC. Suggested-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/ Signed-off-by:
-
- Oct 07, 2024
-
-
Frank Li authored
The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT function to parser interrupt-map. So it doesn't consider '#address-size' in parent interrupt controller, such as GIC. When dt-binding verify interrupt-map, item data matrix is spitted at incorrect position. So cause below warning: arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: interrupt-controller@14: interrupt-map: [[0, 0, 1, 0, 0, 4, 1, 0], [1, 0, 1, 4, 2, 0, 1, 0], ... is too short Remove interrupt-map restriction to workaround this warning for 'fsl,ls1088a-extirq', 'fsl,ls2080a-extirq' and fsl,lx2160a-extirq. Other keep the same restriction. Signed-off-by:
Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20241007161823.811021-1-Frank.Li@nxp.com Signed-off-by:
-
Frank Li authored
msi-parent is standard property. Needn't ref to phandle. Add maxItems: 1 for it. Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: fsl-mc@80c000000: msi-parent:0: [16, 0] is too long Reviewed-by:
-
Miquel Raynal authored
Combinations of "tx" alone, "rx" alone and "tx", "rx" together are supposedly valid (see link below), which is not the case today as "rx" alone is not accepted by the current binding. Let's rework the two interrupt properties to expose all correct possibilities. Cc: Péter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/linux-sound/20241003102552.2c11840e@xps-13/T/#m277fce1d49c50d94e071f7890aed472fa2c64052 Fixes: 8be90641 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Acked-by:
-
- Oct 03, 2024
-
-
Ravikanth Tuniki authored
Add missing reg minItems as based on current binding document only ethernet MAC IO space is a supported configuration. There is a bug in schema, current examples contain 64-bit addressing as well as 32-bit addressing. The schema validation does pass incidentally considering one 64-bit reg address as two 32-bit reg address entries. If we change axi_ethernet_eth1 example node reg addressing to 32-bit schema validation reports: Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb: ethernet@40000000: reg: [[1073741824, 262144]] is too short To fix it add missing reg minItems constraints and to make things clearer stick to 32-bit addressing in examples. Fixes: cbb1ca6d ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml") Signed-off-by:
Ravikanth Tuniki <ravikanth.tuniki@amd.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
- Oct 02, 2024
-
-
Miquel Raynal authored
My understanding of the interrupts property is that it can either be: 1/ - TX 2/ - TX - RX 3/ - Common/combined. There are very little chances that either: - TX - Common/combined or even - TX - RX - Common/combined could be a thing. Looking at the interrupt-names definition (which uses oneOf instead of anyOf), it makes indeed little sense to use anyOf in the interrupts definition. I believe this is just a mistake, hence let's fix it. Fixes: 8be90641 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema") Signed-off-by:
-
Alexey Klimov authored
Add adsp-backed soundcard compatible for QRB4210 RB2 platform, which as of now looks fully compatible with SM8250. Signed-off-by:
Alexey Klimov <alexey.klimov@linaro.org> Reviewed-by:
-
Fabio Estevam authored
Currently, the compatible 'elgin,jg10309-01' is documented inside trivial-devices.yaml, but it does not fit well there as it requires extra properties such as spi-max-frequency, spi-cpha, and spi-cpol. This causes the following dt-schema warnings: make CHECK_DTBS=y rockchip/rv1108-elgin-r1.dtb -j12 DTC [C] arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb rv1108-elgin-r1.dtb:display@0: 'spi-cpha', 'spi-cpol' do not match any of the regexes: ... Fix this problem by introducing a specific binding for the Elgin JG10309-01 SPI-controlled display. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
-
- Sep 30, 2024
-
-
Wolfram Sang authored
The device at 0xffd90000 is named SRU, both in the datasheet and SoC DTSI. Fix the typo in the bindings to avoid the false positive report: sound@ffd90000: reg-names:0: 'sru' is not one of ['scu', 'ssi', 'adg'] Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Rob Herring (Arm) authored
adi,ad5686.yaml and adi,ad5696.yaml duplicate all the I2C device compatible strings with the exception of "adi,ad5337r". Since adi,ad5686.yaml references spi-peripheral-props.yaml, drop the I2C devices from it making it only SPI devices. Update the titles to make the distinction clear. Signed-off-by:
-
- Sep 26, 2024
-
-
Rob Herring authored
Enabling dtc interrupt_provider check reveals the examples are missing the "#interrupt-cells" property as it is a dependency of "interrupt-controller". Some of the indentation is off, so fix that too. Signed-off-by:
Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- Sep 25, 2024
-
-
Krzysztof Kozlowski authored
This reverts commit 9184b17f ("dt-bindings: input: Goodix SPI HID Touchscreen") because it duplicates existing binding leadings to errors: goodix,gt7986u.example.dtb: touchscreen@0: compatible: 'oneOf' conditional failed, one must be fixed: ['goodix,gt7986u'] is too short 'goodix,gt7375p' was expected This was reported on mailing list on 6th of September, but no reaction happened from contributor or maintainer to fix it. Therefore let's drop binding which breaks and duplicates existing one. Fixes: 9184b17f ("dt-bindings: input: Goodix SPI HID Touchscreen") Reported-by:
Jiri Kosina <jkosina@suse.com>
-
- Sep 23, 2024
-
-
Mukesh Ojha authored
Document the compatible for sa8775p SoC. Reviewed-by:
Elliot Berman <quic_eberman@quicinc.com> Signed-off-by:
Mukesh Ojha <quic_mojha@quicinc.com> Acked-by:
Lee Jones <lee@kernel.org>
-
Detlev Casanova authored
Document rk3576 compatible for QoS registers. Signed-off-by:
Detlev Casanova <detlev.casanova@collabora.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/01020191998a2fd4-4d7b091c-9c4c-4067-b8d9-fe7482074d6d-000000@eu-west-1.amazonses.com Signed-off-by:
-
Haibo Chen authored
Allow parsing GPIO controller children nodes with GPIO hogs. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Jingyi Wang authored
Document the Inter-Processor Communication Controller on the Qualcomm QCS8300 Platform, which will be used to route interrupts across various subsystems found on the SoC. Signed-off-by:
Jingyi Wang <quic_jingyw@quicinc.com> Reviewed-by:
Jassi Brar <jassisinghbrar@gmail.com>
-
Nikunj Kela authored
Add a compatible for the ipcc on SA8255p platforms. Reviewed-by:
Nikunj Kela <quic_nkela@quicinc.com> Signed-off-by:
-
Fei Shao authored
Add compatible string for ADSP mailbox on MT8188 SoC, which is compatible with the one used on MT8186. Acked-by:
-
- Sep 18, 2024
-
-
Detlev Casanova authored
It is compatible with the other rockchip SoCs. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240903152308.13565-7-detlev.casanova@collabora.com Signed-off-by:
-
Karthikeyan Krishnasamy authored
RV3028 RTC has a clock out features, the clk out can be controlled using clkout register, to consume the clock out from rv3028 '#clock-cells' property is added. Acked-by:
Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20240912142451.2952633-4-karthikeyan@linumiz.com Signed-off-by:
-
- Sep 17, 2024
-
-
Nikita Shubin authored
Add device tree bindings for the Cirrus Logic EP93xx watchdog block used in these SoCs. Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Marek Vasut authored
The watchdog IP can generate pre-timeout interrupt and can be used as a wake up source. Document both properties. Signed-off-by:
Marek Vasut <marex@denx.de> Acked-by:
-
- Sep 16, 2024
-
-
George Stark authored
The chip has 3 dual-channel PWM modules PWM_AB, PWM_CD, PWM_EF. Signed-off-by:
George Stark <gnstark@salutedevices.com> Signed-off-by:
Dmitry Rokosov <ddrokosov@salutedevices.com> Acked-by:
Conor Dooley <conor@kernel.org> Link: https://lore.kernel.org/r/20240710234116.2370655-3-gnstark@salutedevices.com Signed-off-by:
Uwe Kleine-König <ukleinek@kernel.org>
-
George Stark authored
On newer SoCs, the PWM hardware can require a power domain to operate so add corresponding optional property. Signed-off-by:
-
Krzysztof Kozlowski authored
Properties with variable number of items per each device are expected to have widest constraints in top-level "properties:" block and further customized (narrowed) in "if:then:". Add missing top-level constraints for clock-names. Signed-off-by:
-
- Sep 15, 2024
-
-
Alexandre Ghiti authored
Add description for the Svvptc ISA extension which was ratified recently. Signed-off-by:
Alexandre Ghiti <alexghiti@rivosinc.com> Acked-by:
Palmer Dabbelt <palmer@rivosinc.com>
-
