- Mar 03, 2025
-
-
commit 44de577e61ed239db09f0da9d436866bef9b77dd upstream. The J1939 standard requires the transmission of messages of length 0. For example proprietary messages are specified with a data length of 0 to 1785. The transmission of such messages is not possible. Sending results in no error being returned but no corresponding can frame being generated. Enable the transmission of zero length J1939 messages. In order to facilitate this two changes are necessary: 1) If the transmission of a new message is requested from user space the message is segmented in j1939_sk_send_loop(). Let the segmentation take into account zero length messages, do not terminate immediately, queue the corresponding skb. 2) j1939_session_skb_get_by_offset() selects the next skb to transmit for a session. Take into account that there might be zero length skbs in the queue. Signed-off-by:
Alexander Hölzl <alexander.hoelzl@gmx.net> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org [mkl: commit message rephrased] Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
commit 257a2cd3eb578ee63d6bf90475dc4f4b16984139 upstream. Runtime PM is enabled as one of the last steps of probe(), so all earlier gotos to "exit_free_device" label were not correct and were leading to unbalanced runtime PM disable depth. Fixes: 6e2fe01d ("can: c_can: move runtime PM enable/disable to c_can_platform") Cc: stable@vger.kernel.org Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250112-syscon-phandle-args-can-v1-1-314d9549906f@linaro.org Signed-off-by:
-
commit 9bd24927e3eeb85642c7baa3b28be8bea6c2a078 upstream. If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. Fixes: 2dcb8e87 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Cc: stable@vger.kernel.org Signed-off-by:
Fedor Pchelkin <pchelkin@ispras.ru> Acked-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> Reviewed-by:
-
commit 6aa8a63c471eb6756aabd03f880feffe6a7af6c9 upstream. Several MeiG Smart modems apparently use the same product id, making the defines even less useful. Drop them in favour of using comments consistently to make the id table slightly less unwieldy. Cc: stable@vger.kernel.org Acked-by:
Chester A. Unal <chester.a.unal@arinc9.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
commit 12606fe73f33647c5e79bf666833bf0b225e649d upstream. The correct name for FN990 is FN990A so use it in order to avoid confusion with FN990B. Signed-off-by:
Fabio Porcedda <fabio.porcedda@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
commit c979fb5ece2dc11cc9cc3d5c66f750e210bfdee2 upstream. Add the following Telit Cinterion FN990B40 compositions: 0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 20 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by:Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
commit db79e75460fc59b19f9c89d4b068e61cee59f37d upstream. MeiG Smart SLM828 is an LTE-A CAT6 modem with the mPCIe form factor. The "Cls=ff(vend.) Sub=10 Prot=02" and "Cls=ff(vend.) Sub=10 Prot=03" interfaces respond to AT commands. Add these interfaces. The product ID the modem uses is shared across multiple modems. Therefore, add comments to describe which interface is used for which modem. T: Bus=01 Lev=01 Prnt=05 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev=05.04 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=4da7ec42 C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=10 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=02 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=03 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=04 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=05 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
-
commit 12e712964f41d05ae034989892de445781c46730 upstream. If we receive an initial fragment of size 8 bytes which specifies a wLength of 1 byte (so the reassembled message is supposed to be 9 bytes long), and we then receive a second fragment of size 9 bytes (which is not supposed to happen), we currently wrongly bypass the fragment reassembly code but still pass the pointer to the acm->notification_buffer to acm_process_notification(). Make this less wrong by always going through fragment reassembly when we expect more fragments. Before this patch, receiving an overlong fragment could lead to `newctrl` in acm_process_notification() being uninitialized data (instead of data coming from the device). Cc: stable <stable@kernel.org> Fixes: ea258352 ("cdc-acm: reassemble fragmented notifications") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
commit e563b01208f4d1f609bcab13333b6c0e24ce6a01 upstream. If the first fragment is shorter than struct usb_cdc_notification, we can't calculate an expected_size. Log an error and discard the notification instead of reading lengths from memory outside the received data, which can lead to memory corruption when the expected_size decreases between fragments, causing `expected_size - acm->nb_index` to wrap. This issue has been present since the beginning of git history; however, it only leads to memory corruption since commit ea258352 ("cdc-acm: reassemble fragmented notifications"). A mitigating factor is that acm_ctrl_irq() can only execute after userspace has opened /dev/ttyACM*; but if ModemManager is running, ModemManager will do that automatically depending on the USB device's vendor/product IDs and its other interfaces. Cc: stable <stable@kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
commit 7284922f3e4fa285dff1b8bb593aa9a0b8458f30 upstream. Add Renesas R-Car D3 USB Download mode quirk and update comments on all the other Renesas R-Car USB Download mode quirks to discern them from each other. This follows R-Car Series, 3rd Generation reference manual Rev.2.00 chapter 19.2.8 USB download mode . Fixes: 6d853c9e ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode") Cc: stable <stable@kernel.org> Signed-off-by:
Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250209145708.106914-1-marek.vasut+renesas@mailbox.org Signed-off-by:
-
commit 2240fed37afbcdb5e8b627bc7ad986891100e05d upstream. Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface. Reported-and-tested-by:
Robert Morris <rtm@csail.mit.edu> Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/ Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu Signed-off-by:
-
commit da1668997052ed1cb00322e1f3b63702615c9429 upstream. While the MIDI jacks are configured correctly, and the MIDIStreaming endpoint descriptors are filled with the correct information, bNumEmbMIDIJack and bLength are set incorrectly in these descriptors. This does not matter when the numbers of in and out ports are equal, but when they differ the host will receive broken descriptors with uninitialized stack memory leaking into the descriptor for whichever value is smaller. The precise meaning of "in" and "out" in the port counts is not clearly defined and can be confusing. But elsewhere the driver consistently uses this to match the USB meaning of IN and OUT viewed from the host, so that "in" ports send data to the host and "out" ports receive data from it. Cc: stable <stable@kernel.org> Fixes: c8933c3f ("USB: gadget: f_midi: allow a dynamic number of input and output ports") Signed-off-by:
John Keeping <jkeeping@inmusicbrands.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20250130195035.3883857-1-jkeeping@inmusicbrands.com Signed-off-by:
-
commit 159daf1258227f44b26b5d38f4aa8f37b8cca663 upstream. The fastboot tool for communicating with Android bootloaders does not work reliably with this device if USB 2 Link Power Management (LPM) is enabled. Various fastboot commands are affected, including the following, which usually reproduces the problem within two tries: fastboot getvar kernel getvar:kernel FAILED (remote: 'GetVar Variable Not found') This issue was hidden on many systems up until commit 63a1f845 ("xhci: stored cached port capability values in one place") as the xhci driver failed to detect USB 2 LPM support if USB 3 ports were listed before USB 2 ports in the "supported protocol capabilities". Adding the quirk resolves the issue. No drawbacks are expected since the device uses different USB product IDs outside of fastboot mode, and since fastboot commands worked before, until LPM was enabled on the tested system by the aforementioned commit. Based on a patch from Forest <forestix@nom.one> from which most of the code and commit message is taken. Cc: stable <stable@kernel.org> Reported-by:
Forest <forestix@nom.one> Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com Signed-off-by:
-
commit e169d96eecd447ff7fd7542ca5fa0911f5622054 upstream. Teclast disk used on Huawei hisi platforms doesn't work well, losing connectivity intermittently if LPM is enabled. Add quirk disable LPM to resolve the issue. Signed-off-by:
Lei Huang <huanglei@kylinos.cn> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com Signed-off-by:
-
commit 4aac0db5a0ebc599d4ad9bf5ebab78afa1f33e10 upstream. When usb_control_msg is used in the get_bMaxPacketSize0 function, the USB pipe does not include the endpoint device number. This can cause failures when a usb hub port is reinitialized after encountering a bad cable connection. As a result, the system logs the following error messages: usb usb2-port1: cannot reset (err = -32) usb usb2-port1: Cannot enable. Maybe the USB cable is bad? usb usb2-port1: attempt power cycle usb 2-1: new high-speed USB device number 5 using ci_hdrc usb 2-1: device descriptor read/8, error -71 The problem began after commit 85d07c55 ("USB: core: Unite old scheme and new scheme descriptor reads"). There usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the macro usb_rcvaddr0pipe, which does not include the endpoint device number. usb_get_device_descriptor, on the other hand, used the macro usb_rcvctrlpipe, which includes the endpoint device number. By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe instead of usb_rcvaddr0pipe, the issue can be resolved. This change will ensure that the endpoint device number is included in the USB pipe, preventing reinitialization failures. If the endpoint has not set the device number yet, it will still work because the device number is 0 in udev. Cc: stable <stable@kernel.org> Fixes: 85d07c55 ("USB: core: Unite old scheme and new scheme descriptor reads") Signed-off-by:
Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by:
-
commit e71f7f42e3c874ac3314b8f250e8416a706165af upstream. LS7A EHCI controller doesn't have extended capabilities, so the EECP (EHCI Extended Capabilities Pointer) field of HCCPARAMS register should be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be fixed in future, now just clear the EECP field to avoid error messages on boot: ...... [ 0.581675] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581699] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581716] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581851] pci 0000:00:04.1: EHCI: unrecognized capability ff ...... [ 0.581916] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.581951] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582704] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582799] pci 0000:00:05.1: EHCI: unrecognized capability ff ...... Cc: stable <stable@kernel.org> Signed-off-by:
Baoqi Zhang <zhangbaoqi@loongson.cn> Signed-off-by:
Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20250202124935.480500-1-chenhuacai@loongson.cn Signed-off-by:
-
commit 58cd423820d5b5610977e55e4acdd06628829ede upstream. In dwc2_hsotg_udc_start(), e.g. when binding composite driver, "of_node" is set to hsotg->dev->of_node. It causes errors when binding the gadget driver several times, on stm32mp157c-ev1 board. Below error is seen: "pin PA10 already requested by 49000000.usb-otg; cannot claim for gadget.0" The first time, no issue is seen as when registering the driver, of_node isn't NULL: -> gadget_dev_desc_UDC_store -> usb_gadget_register_driver_owner -> driver_register ... -> really_probe -> pinctrl_bind_pins (no effect) Then dwc2_hsotg_udc_start() sets of_node. The second time (stop the gadget, reconfigure it, then start it again), of_node has been set, so the probing code tries to acquire pins for the gadget. These pins are hold by the controller, hence the error. So clear gadget.dev.of_node in udc_stop() routine to avoid the issue. Fixes: 7d7b2292 ("usb: gadget: s3c-hsotg: Propagate devicetree to gadget drivers") Cc: stable <stable@kernel.org> Signed-off-by:Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20250124173325.2747710-1-fabrice.gasnier@foss.st.com Signed-off-by:
-
commit 335a1fc1193481f8027f176649c72868172f6f8b upstream. drivers/usb/gadget/udc/renesas_usb3.c: In function 'renesas_usb3_probe': drivers/usb/gadget/udc/renesas_usb3.c:2638:73: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=] 2638 | snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~ ^~ ^ Fixes: 746bfe63 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: stable@vger.kernel.org Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501201409.BIQPtkeB-lkp@intel.com/ Signed-off-by:
Guo Ren <guoren@linux.alibaba.com> Link: https://lore.kernel.org/r/20250122081231.47594-1-guoren@kernel.org Signed-off-by:
-
commit 634775a752a86784511018a108f3b530cc3399a7 upstream. The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, set the registered flag early on in the switch register API. Fixes: b787a3e7 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") Cc: stable <stable@kernel.org> Signed-off-by:
Elson Roy Serrao <quic_eserrao@quicinc.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com Signed-off-by:
-
commit d3a8c28426fc1fb3252753a9f1db0d691ffc21b0 upstream. There is a frequent timeout during controller enter/exit from halt state after toggling the run_stop bit by SW. This timeout occurs when performing frequent role switches between host and device, causing device enumeration issues due to the timeout. This issue was not present when USB2 suspend PHY was disabled by passing the SNPS quirks (snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS. However, there is a requirement to enable USB2 suspend PHY by setting of GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts in gadget or host mode results in the timeout issue. This commit addresses this timeout issue by ensuring that the bits GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting the dwc3_gadget_run_stop sequence and restoring them after the dwc3_gadget_run_stop sequence is completed. Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by:
Selvarasu Ganesan <selvarasu.g@samsung.com> Acked-by:
Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com Signed-off-by:
-
commit c631a2de7ae48d50434bdc205d901423f8577c65 upstream. Explicitly clear DEBUGCTL.LBR when a CPU is starting, prior to purging the LBR MSRs themselves, as at least one system has been found to transfer control to the kernel with LBRs enabled (it's unclear whether it's a BIOS flaw or a CPU goof). Because the kernel preserves the original DEBUGCTL, even when toggling LBRs, leaving DEBUGCTL.LBR as is results in running with LBRs enabled at all times. Closes: https://lore.kernel.org/all/c9d8269bff69f6359731d758e3b1135dedd7cc61.camel@redhat.com Reported-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
-
commit 46d6c6f3ef0eaff71c2db6d77d4e2ebb7adac34f upstream. When preparing vmcb02 for nested VMRUN (or state restore), "enter" guest mode prior to initializing the MMU for nested NPT so that guest_mode is set in the MMU's role. KVM's model is that all L2 MMUs are tagged with guest_mode, as the behavior of hypervisor MMUs tends to be significantly different than kernel MMUs. Practically speaking, the bug is relatively benign, as KVM only directly queries role.guest_mode in kvm_mmu_free_guest_mode_roots() and kvm_mmu_page_ad_need_write_protect(), which SVM doesn't use, and in paths that are optimizations (mmu_page_zap_pte() and shadow_mmu_try_split_huge_pages()). And while the role is incorprated into shadow page usage, because nested NPT requires KVM to be using NPT for L1, reusing shadow pages across L1 and L2 is impossible as L1 MMUs will always have direct=1, while L2 MMUs will have direct=0. Hoist the TLB processing and setting of HF_GUEST_MASK to the beginning of the flow instead of forcing guest_mode in the MMU, as nothing in nested_vmcb02_prepare_control() between the old and new locations touches TLB flush requests or HF_GUEST_MASK, i.e. there's no reason to present inconsistent vCPU state to the MMU. Fixes: 69cb8774 ("KVM: nSVM: move MMU setup to nested_prepare_vmcb_control") Cc: stable@vger.kernel.org Reported-by:
Yosry Ahmed <yosry.ahmed@linux.dev> Reviewed-by:
-
commit a8de7f100bb5989d9c3627d3a223ee1c863f3b69 upstream. Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and only if the local API is emulated/virtualized by KVM, and explicitly reject said hypercalls if the local APIC is emulated in userspace, i.e. don't rely on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID. Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if Hyper-V enlightenments are exposed to the guest without an in-kernel local APIC: dump_stack+0xbe/0xfd __kasan_report.cold+0x34/0x84 kasan_report+0x3a/0x50 __apic_accept_irq+0x3a/0x5c0 kvm_hv_send_ipi.isra.0+0x34e/0x820 kvm_hv_hypercall+0x8d9/0x9d0 kvm_emulate_hypercall+0x506/0x7e0 __vmx_handle_exit+0x283/0xb60 vmx_handle_exit+0x1d/0xd0 vcpu_enter_guest+0x16b0/0x24c0 vcpu_run+0xc0/0x550 kvm_arch_vcpu_ioctl_run+0x170/0x6d0 kvm_vcpu_ioctl+0x413/0xb20 __se_sys_ioctl+0x111/0x160 do_syscal1_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode can't be modified after vCPUs are created, i.e. if one vCPU has an in-kernel local APIC, then all vCPUs have an in-kernel local APIC. Reported-by:
Dongjie Zou <zoudongjie@huawei.com> Fixes: 214ff83d ("KVM: x86: hyperv: implement PV IPI send hypercalls") Fixes: 2bc39970 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID") Cc: stable@vger.kernel.org Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20250118003454.2619573-2-seanjc@google.com Signed-off-by:
-
commit 1abb2648698bf10783d2236a6b4a7ca5e8021699 upstream. It malicious user provides a small pptable through sysfs and then a bigger pptable, it may cause buffer overflow attack in function smu_sys_set_pp_table(). Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Jiang Liu <gerry@linux.alibaba.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
commit 8c8ecc98f5c65947b0070a24bac11e12e47cc65d upstream. The ELP worker needs to calculate new metric values for all neighbors "reachable" over an interface. Some of the used metric sources require locks which might need to sleep. This sleep is incompatible with the RCU list iterator used for the recorded neighbors. The initial approach to work around of this problem was to queue another work item per neighbor and then run this in a new context. Even when this solved the RCU vs might_sleep() conflict, it has a major problems: Nothing was stopping the work item in case it is not needed anymore - for example because one of the related interfaces was removed or the batman-adv module was unloaded - resulting in potential invalid memory accesses. Directly canceling the metric worker also has various problems: * cancel_work_sync for a to-be-deactivated interface is called with rtnl_lock held. But the code in the ELP metric worker also tries to use rtnl_lock() - which will never return in this case. This also means that cancel_work_sync would never return because it is waiting for the worker to finish. * iterating over the neighbor list for the to-be-deactivated interface is currently done using the RCU specific methods. Which means that it is possible to miss items when iterating over it without the associated spinlock - a behaviour which is acceptable for a periodic metric check but not for a cleanup routine (which must "stop" all still running workers) The better approch is to get rid of the per interface neighbor metric worker and handle everything in the interface worker. The original problems are solved by: * creating a list of neighbors which require new metric information inside the RCU protected context, gathering the metric according to the new list outside the RCU protected context * only use rcu_trylock inside metric gathering code to avoid a deadlock when the cancel_delayed_work_sync is called in the interface removal code (which is called with the rtnl_lock held) Cc: stable@vger.kernel.org Fixes: c833484e ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
commit e7e34ffc976aaae4f465b7898303241b81ceefc3 upstream. If a temporary error happened in the evaluation of the neighbor throughput information, then the invalid throughput result should not be stored in the throughtput EWMA. Cc: stable@vger.kernel.org Signed-off-by:
-
commit ccb7276a6d26d6f8416e315b43b45e15ee7f29e2 upstream. Reference counting is used to ensure that batadv_hardif_neigh_node and batadv_hard_iface are not freed before/during batadv_v_elp_throughput_metric_update work is finished. But there isn't a guarantee that the hard if will remain associated with a soft interface up until the work is finished. This fixes a crash triggered by reboot that looks like this: Call trace: batadv_v_mesh_free+0xd0/0x4dc [batman_adv] batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x178/0x398 worker_thread+0x2e8/0x4d0 kthread+0xd8/0xdc ret_from_fork+0x10/0x20 (the batadv_v_mesh_free call is misleading, and does not actually happen) I was able to make the issue happen more reliably by changing hardif_neigh->bat_v.metric_work work to be delayed work. This allowed me to track down and confirm the fix. Cc: stable@vger.kernel.org Fixes: c833484e ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by:
Andy Strohman <andrew@andrewstrohman.com> [sven@narfation.org: prevent entering batadv_v_elp_get_throughput without soft_iface] Signed-off-by:
-
[ Upstream commit 6917192378c1ce17ba31df51c4e0d8b1c97a453b ] The Vexia EDU ATLA 10 tablet comes in 2 different versions with significantly different mainboards. The only outward difference is that the charging barrel on one is marked 5V and the other is marked 9V. The 5V version mostly works with the BYTCR defaults, except that it is missing a CHAN package in its ACPI tables and the default of using SSP0-AIF2 is wrong, instead SSP0-AIF1 must be used. That and its jack detect signal is not inverted as it usually is. Add a DMI quirk for the 5V version to fix sound not working. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20250123132507.18434-1-hdegoede@redhat.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
[ Upstream commit f7c848431632598ff9bce57a659db6af60d75b39 ] I got a syzbot report: slab-out-of-bounds Read in orangefs_debug_write... several people suggested fixes, I tested Al Viro's suggestion and made this patch. Signed-off-by:
Mike Marshall <hubcap@omnibond.com> Reported-by:
<syzbot+fc519d7875f2d9186c1f@syzkaller.appspotmail.com> Signed-off-by:
-
[ Upstream commit 6db2526c1d694c91c6e05e2f186c085e9460f202 ] Setting and clearing CPU bits in the mm_cpumask is only ever done by the CPU itself, from the context switch code or the TLB flush code. Synchronization is handled by switch_mm_irqs_off() blocking interrupts. Sending TLB flush IPIs to CPUs that are in the mm_cpumask, but no longer running the program causes a regression in the will-it-scale tlbflush2 test. This test is contrived, but a large regression here might cause a small regression in some real world workload. Instead of always sending IPIs to CPUs that are in the mm_cpumask, but no longer running the program, send these IPIs only once a second. The rest of the time we can skip over CPUs where the loaded_mm is different from the target mm. Reported-by:
kernel test roboto <oliver.sang@intel.com> Signed-off-by:
Rik van Riel <riel@surriel.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20241204210316.612ee573@fangorn Closes: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/ Signed-off-by:
-
[ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by:Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
-
[ Upstream commit 6d002348789bc16e9203e9818b7a3688787e3b29 ] Function xen_pin_page calls xen_pte_lock, which in turn grab page table lock (ptlock). When locking, xen_pte_lock expect mm->page_table_lock to be held before grabbing ptlock, but this does not happen when pinning is caused by xen_mm_pin_all. This commit addresses lockdep warning below, which shows up when suspending a Xen VM. [ 3680.658422] Freezing user space processes [ 3680.660156] Freezing user space processes completed (elapsed 0.001 seconds) [ 3680.660182] OOM killer disabled. [ 3680.660192] Freezing remaining freezable tasks [ 3680.661485] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 3680.685254] [ 3680.685265] ================================== [ 3680.685269] WARNING: Nested lock was not taken [ 3680.685274] 6.12.0+ #16 Tainted: G W [ 3680.685279] ---------------------------------- [ 3680.685283] migration/0/19 is trying to lock: [ 3680.685288] ffff88800bac33c0 (ptlock_ptr(ptdesc)#2){+.+.}-{3:3}, at: xen_pin_page+0x175/0x1d0 [ 3680.685303] [ 3680.685303] but this task is not holding: [ 3680.685308] init_mm.page_table_lock [ 3680.685311] [ 3680.685311] stack backtrace: [ 3680.685316] CPU: 0 UID: 0 PID: 19 Comm: migration/0 Tainted: G W 6.12.0+ #16 [ 3680.685324] Tainted: [W]=WARN [ 3680.685328] Stopper: multi_cpu_stop+0x0/0x120 <- __stop_cpus.constprop.0+0x8c/0xd0 [ 3680.685339] Call Trace: [ 3680.685344] <TASK> [ 3680.685347] dump_stack_lvl+0x77/0xb0 [ 3680.685356] __lock_acquire+0x917/0x2310 [ 3680.685364] lock_acquire+0xce/0x2c0 [ 3680.685369] ? xen_pin_page+0x175/0x1d0 [ 3680.685373] _raw_spin_lock_nest_lock+0x2f/0x70 [ 3680.685381] ? xen_pin_page+0x175/0x1d0 [ 3680.685386] xen_pin_page+0x175/0x1d0 [ 3680.685390] ? __pfx_xen_pin_page+0x10/0x10 [ 3680.685394] __xen_pgd_walk+0x233/0x2c0 [ 3680.685401] ? stop_one_cpu+0x91/0x100 [ 3680.685405] __xen_pgd_pin+0x5d/0x250 [ 3680.685410] xen_mm_pin_all+0x70/0xa0 [ 3680.685415] xen_pv_pre_suspend+0xf/0x280 [ 3680.685420] xen_suspend+0x57/0x1a0 [ 3680.685428] multi_cpu_stop+0x6b/0x120 [ 3680.685432] ? update_cpumasks_hier+0x7c/0xa60 [ 3680.685439] ? __pfx_multi_cpu_stop+0x10/0x10 [ 3680.685443] cpu_stopper_thread+0x8c/0x140 [ 3680.685448] ? smpboot_thread_fn+0x20/0x1f0 [ 3680.685454] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 3680.685458] smpboot_thread_fn+0xed/0x1f0 [ 3680.685462] kthread+0xde/0x110 [ 3680.685467] ? __pfx_kthread+0x10/0x10 [ 3680.685471] ret_from_fork+0x2f/0x50 [ 3680.685478] ? __pfx_kthread+0x10/0x10 [ 3680.685482] ret_from_fork_asm+0x1a/0x30 [ 3680.685489] </TASK> [ 3680.685491] [ 3680.685491] other info that might help us debug this: [ 3680.685497] 1 lock held by migration/0/19: [ 3680.685500] #0: ffffffff8284df38 (pgd_lock){+.+.}-{3:3}, at: xen_mm_pin_all+0x14/0xa0 [ 3680.685512] [ 3680.685512] stack backtrace: [ 3680.685518] CPU: 0 UID: 0 PID: 19 Comm: migration/0 Tainted: G W 6.12.0+ #16 [ 3680.685528] Tainted: [W]=WARN [ 3680.685531] Stopper: multi_cpu_stop+0x0/0x120 <- __stop_cpus.constprop.0+0x8c/0xd0 [ 3680.685538] Call Trace: [ 3680.685541] <TASK> [ 3680.685544] dump_stack_lvl+0x77/0xb0 [ 3680.685549] __lock_acquire+0x93c/0x2310 [ 3680.685554] lock_acquire+0xce/0x2c0 [ 3680.685558] ? xen_pin_page+0x175/0x1d0 [ 3680.685562] _raw_spin_lock_nest_lock+0x2f/0x70 [ 3680.685568] ? xen_pin_page+0x175/0x1d0 [ 3680.685572] xen_pin_page+0x175/0x1d0 [ 3680.685578] ? __pfx_xen_pin_page+0x10/0x10 [ 3680.685582] __xen_pgd_walk+0x233/0x2c0 [ 3680.685588] ? stop_one_cpu+0x91/0x100 [ 3680.685592] __xen_pgd_pin+0x5d/0x250 [ 3680.685596] xen_mm_pin_all+0x70/0xa0 [ 3680.685600] xen_pv_pre_suspend+0xf/0x280 [ 3680.685607] xen_suspend+0x57/0x1a0 [ 3680.685611] multi_cpu_stop+0x6b/0x120 [ 3680.685615] ? update_cpumasks_hier+0x7c/0xa60 [ 3680.685620] ? __pfx_multi_cpu_stop+0x10/0x10 [ 3680.685625] cpu_stopper_thread+0x8c/0x140 [ 3680.685629] ? smpboot_thread_fn+0x20/0x1f0 [ 3680.685634] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 3680.685638] smpboot_thread_fn+0xed/0x1f0 [ 3680.685642] kthread+0xde/0x110 [ 3680.685645] ? __pfx_kthread+0x10/0x10 [ 3680.685649] ret_from_fork+0x2f/0x50 [ 3680.685654] ? __pfx_kthread+0x10/0x10 [ 3680.685657] ret_from_fork_asm+0x1a/0x30 [ 3680.685662] </TASK> [ 3680.685267] xen:grant_table: Grant tables using version 1 layout [ 3680.685921] OOM killer enabled. [ 3680.685934] Restarting tasks ... done. Signed-off-by:Maksym Planeta <maksym@exostellar.io> Reviewed-by:
Juergen Gross <jgross@suse.com> Message-ID: <20241204103516.3309112-1-maksym@exostellar.io> Signed-off-by:
-
[ Upstream commit 2b938e3db335e3670475e31a722c2bee34748c5a ] Definitions of ioread64 and iowrite64 macros in asm/io.h called by vfio pci implementations are enclosed inside check for CONFIG_GENERIC_IOMAP. They don't get defined if CONFIG_GENERIC_IOMAP is defined. Include linux/io-64-nonatomic-lo-hi.h to define iowrite64 and ioread64 macros when they are not defined. io-64-nonatomic-lo-hi.h maps the macros to generic implementation in lib/iomap.c. The generic implementation does 64 bit rw if readq/writeq is defined for the architecture, otherwise it would do 32 bit back to back rw. Note that there are two versions of the generic implementation that differs in the order the 32 bit words are written if 64 bit support is not present. This is not the little/big endian ordering, which is handled separately. This patch uses the lo followed by hi word ordering which is consistent with current back to back implementation in the vfio/pci code. Signed-off-by:
Ramesh Thomas <ramesh.thomas@intel.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20241210131938.303500-2-ramesh.thomas@intel.com Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
[ Upstream commit 80967b354a76b360943af384c10d807d98bea5c4 ] If either SIGINT is received twice, or after a SIGALRM (that is, after timerlat was supposed to stop), abort processing events currently left in the tracefs buffer and exit immediately. This allows the user to exit rtla without waiting for processing all events, should that take longer than wanted, at the cost of not processing all samples. Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/20250116144931.649593-6-tglozar@redhat.com Signed-off-by:
Tomas Glozar <tglozar@redhat.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
[ Upstream commit d6899e560366e10141189697502bc5521940c588 ] If either SIGINT is received twice, or after a SIGALRM (that is, after timerlat was supposed to stop), abort processing events currently left in the tracefs buffer and exit immediately. This allows the user to exit rtla without waiting for processing all events, should that take longer than wanted, at the cost of not processing all samples. Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/20250116144931.649593-5-tglozar@redhat.com Signed-off-by:
-
[ Upstream commit 1e95c798d8a7f70965f0f88d4657b682ff0ec75f ] Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. Signed-off-by:
Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20241218014214.64533-3-kanie@linux.alibaba.com Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
[ Upstream commit a3282f84b2151d254dc4abf24d1255c6382be774 ] Add Microchip parts to the Device ID table so the driver supports PCI100x devices. Add a new macro to quirk the Microchip Switchtec PCI100x parts to allow DMA access via NTB to work when the IOMMU is turned on. PCI100x family has 6 variants; each variant is designed for different application usages, different port counts and lane counts: PCI1001 has 1 x4 upstream port and 3 x4 downstream ports PCI1002 has 1 x4 upstream port and 4 x2 downstream ports PCI1003 has 2 x4 upstream ports, 2 x2 upstream ports, and 2 x2 downstream ports PCI1004 has 4 x4 upstream ports PCI1005 has 1 x4 upstream port and 6 x2 downstream ports PCI1006 has 6 x2 upstream ports and 2 x2 downstream ports [Historical note: these parts use PCI_VENDOR_ID_EFAR (0x1055), from EFAR Microsystems, which was acquired in 1996 by Standard Microsystems Corp, which was acquired by Microchip Technology in 2012. The PCI-SIG confirms that Vendor ID 0x1055 is assigned to Microchip even though it's not visible via https://pcisig.com/membership/member-companies] Link: https://lore.kernel.org/r/20250120095524.243103-1-Saladi.Rakeshbabu@microchip.com Signed-off-by:Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com> [bhelgaas: Vendor ID history] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-By:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
-
[ Upstream commit b198499c7d2508a76243b98e7cca992f6fd2b7f7 ] Apparently the Raptor Lake-P reference firmware configures the PIO log size correctly, but some vendor BIOSes, including at least ASUSTeK COMPUTER INC. Zenbook UX3402VA_UX3402VA, do not. Apply the quirk for Raptor Lake-P. This prevents kernel complaints like: DPC: RP PIO log size 0 is invalid and also enables the DPC driver to dump the RP PIO Log registers when DPC is triggered. Note that the bug report also mentions 8086:a76e, which has been already added by 627c6db2 ("PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports"). Link: https://lore.kernel.org/r/20250102164315.7562-1-tiwai@suse.de Link: https://bugzilla.suse.com/show_bug.cgi?id=1234623 Signed-off-by:
Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by:
-
[ Upstream commit 1221989555db711578a327a9367f1be46500cb48 ] syzbot report a null-ptr-deref in vidtv_mux_stop_thread. [1] If dvb->mux is not initialized successfully by vidtv_mux_init() in the vidtv_start_streaming(), it will trigger null pointer dereference about mux in vidtv_mux_stop_thread(). Adjust the timing of streaming initialization and check it before stopping it. [1] KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] CPU: 0 UID: 0 PID: 5842 Comm: syz-executor248 Not tainted 6.13.0-rc4-syzkaller-00012-g9b2ffa6148b1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:vidtv_mux_stop_thread+0x26/0x80 drivers/media/test-drivers/vidtv/vidtv_mux.c:471 Code: 90 90 90 90 66 0f 1f 00 55 53 48 89 fb e8 82 2e c8 f9 48 8d bb 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 02 7e 3b 0f b6 ab 28 01 00 00 31 ff 89 ee e8 RSP: 0018:ffffc90003f2faa8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87cfb125 RDX: 0000000000000025 RSI: ffffffff87d120ce RDI: 0000000000000128 RBP: ffff888029b8d220 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000003 R12: ffff888029b8d188 R13: ffffffff8f590aa0 R14: ffffc9000581c5c8 R15: ffff888029a17710 FS: 00007f7eef5156c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7eef5e635c CR3: 0000000076ca6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vidtv_stop_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:209 [inline] vidtv_stop_feed+0x151/0x250 drivers/media/test-drivers/vidtv/vidtv_bridge.c:252 dmx_section_feed_stop_filtering+0x90/0x160 drivers/media/dvb-core/dvb_demux.c:1000 dvb_dmxdev_feed_stop.isra.0+0x1ee/0x270 drivers/media/dvb-core/dmxdev.c:486 dvb_dmxdev_filter_stop+0x22a/0x3a0 drivers/media/dvb-core/dmxdev.c:559 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3f8/0xb60 fs/file_table.c:450 task_work_run+0x14e/0x250 kernel/task_work.c:239 get_signal+0x1d3/0x2610 kernel/signal.c:2790 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by:
<syzbot+5e248227c80a3be8e96a@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=5e248227c80a3be8e96a Signed-off-by:
Edward Adam Davis <eadavis@qq.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
[ Upstream commit 8d46603eeeb4c6abff1d2e49f2a6ae289dac765e ] It appears that do_div() once more gets confused by a complex expression that ends up not quite being constant despite __builtin_constant_p() thinking it is: ERROR: modpost: "__aeabi_uldivmod" [drivers/media/dvb-frontends/cxd2841er.ko] undefined! Use div_u64() instead, forcing the expression to be evaluated first, and making it a bit more readable. Cc: Dan Carpenter <dan.carpenter@linaro.org> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Closes: https://lore.kernel.org/linux-media/CA+G9fYvvNm-aYodLaAwwTjEGtX0YxR-1R14FOA5aHKt0sSVsYg@mail.gmail.com/ Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Closes: https://lore.kernel.org/linux-media/CA+G9fYvvNm-aYodLaAwwTjEGtX0YxR-1R14FOA5aHKt0sSVsYg@mail.gmail.com/ Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
