In both DOS and ISO partition tables the same code to create partition name
like "hda1" was repeated.

Code moved to into a new function part_set_generic_name() in part.c and optimized.
Added recognition of MMC and SD types, name is like "mmcsda1".

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Add special target "mbr" (otherwise configurable via CONFIG_FASTBOOT_MBR_NAME)
to write MBR partition table.
Partitions are now searched using the generic function which finds any
partiiton by name. For MBR the partition names hda1, sda1, etc. are used.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

So far partition search by name has been supported only on the EFI partition
table. This patch extends the search to all partition tables.

Rename part_get_info_efi_by_name() to part_get_info_by_name(), move it from
part_efi.c into part.c and make it a generic function which traverses all part
drivers and searches all partitions (in the order given by the linked list).

For this a new variable struct part_driver.max_entries is added, which limits
the number of partitions searched. For EFI this was GPT_ENTRY_NUMBERS.
Similarly the limit is defined for DOS, ISO, MAC and AMIGA partition tables.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>

The calculation of "dev_desc->lba - 34  - 1 - offset" is not correct for
size '-', because both fist_usable_lba and last_usable_lba will remain
34 sectors.

We can simply use 0 for size '-' because the part_efi module will decode
the size and auto extend the size to maximum available size.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

This fixes a mismatch between the %zu format and the type used on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Partitions on the iso el torito partition table interpreter
only start from partition 1. So when printing out the tables,
let's also start counting at 1.

Signed-off-by: Alexander Graf <agraf@suse.de>

the last value acceptable value for offset is last_usable_lba + 1
and not last_usable_lba - 1

issue found with SDCARD partition commands on u-boot 2015.10
but this part of code don't change

1- create GPT partion on all the card
  > gpt write mmc 0 name=test,start=0,size=0
  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fde       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     b710eb04-45b9-e94a-8d0b-21458d596f54

=> Start = 0x22*512 = 0x4400
=> Size = (0x003a9fde-0x22+1) * 512  = 0x753F7A00

2- try to recreate the same partition with the next command
   (block size:512 bytes = 0x200)

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7A00
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7800
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7600
    Writing GPT: success!

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fdc       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     36ec30ef-7ca4-cd48-97cd-ea9fb95185d0

the max LBA when the size is indicated (0x003a9fdc) is lower than
when u-boot compute the max allowed value with size=0 (0x003a9fde)

in the code :

     /* partition ending lba */
     if ((i == parts - 1) && (partitions[i].size == 0))
		/* extend the last partition to maximuim */
		gpt_e[i].ending_lba = gpt_h->last_usable_lba;
     else
		gpt_e[i].ending_lba = cpu_to_le64(offset - 1);

so offset = gpt_h->last_usable_lba + 1 is acceptable !
but the test (offset >= last_usable_lba) cause the error

END

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>disk: part_efi: fix check of the max partition size
the last value acceptable value for offset is (last_usable_lba + 1)
and not (last_usable_lba - 1)

issue found with SDCARD partition commands on u-boot 2015.10
but this part of code don't change

1- I create GPT partion on all the card (start and size undefined)

  > gpt write mmc 0 name=test,start=0,size=0
  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fde       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     b710eb04-45b9-e94a-8d0b-21458d596f54

=> Start = 0x22*512 = 0x4400
=> Size = (0x003a9fde-0x22+1) * 512  = 0x753F7A00

2- I try to recreate the same partition with the command gpt write
   and with start and size values (block size:512 bytes = 0x200)

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7A00
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7800
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7600
    Writing GPT: success!

  I check the partition created :

  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fdc       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     36ec30ef-7ca4-cd48-97cd-ea9fb95185d0

=> but the max LBA when the size is indicated (0x003a9fdc) is lower than
   when u-boot compute the max allowed value with size=0 (0x003a9fde)

3- in the code, just after my patch, line 446

     /* partition ending lba */
     if ((i == parts - 1) && (partitions[i].size == 0))
		/* extend the last partition to maximuim */
		gpt_e[i].ending_lba = gpt_h->last_usable_lba;
     else
		gpt_e[i].ending_lba = cpu_to_le64(offset - 1);

  so offset = gpt_h->last_usable_lba + 1 is acceptable !
  (it the value used when size is 0)

  but today the test (offset >= last_usable_lba) cause the error
  my patch only solve this issue

END

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

Return -EINVAL instead of -1 in this function, to provide a more meaningful
error.

Signed-off-by: Simon Glass <sjg@chromium.org>

This is not needed since we can use the functions provided by the legacy
block device support.

Signed-off-by: Simon Glass <sjg@chromium.org>

Drop use of the table in part.c for this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function is implemented by the legacy block functions now. Drop it.

We cannot yet make sata_dev_desc[] private to common/sata.c as it is used by
the SATA drivers. This will require the SATA interface to be reworked.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Instead of calling xx_get_dev() functions for each interface type, use the
new legacy block driver which can provide the device through its interface.

Signed-off-by: Simon Glass <sjg@chromium.org>

This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.

Signed-off-by: Simon Glass <sjg@chromium.org>

Real CD-ROMs are pretty obsolete these days. Usually people still keep
iso files around, but just put them on USB sticks or SD cards and expect
them to "just work".

To support this use case with El Torito images, add support for 512 byte
sector size to the iso parsing code.

Signed-off-by: Alexander Graf <agraf@suse.de>

The generic partition code treats partition 0 as "whole disk". So
we should start with partition 1 as the first partition in the iso
partition table.

Signed-off-by: Alexander Graf <agraf@suse.de>

The iso partition table implementation has a few endian and 64bit
problems. Clean it up a bit to become endian and bitness safe.

Signed-off-by: Alexander Graf <agraf@suse.de>

Fixes the following warning with PART_DEBUG enabled:
disk/part.c: In function ‘get_partition_info’:
disk/part.c:372:3: warning: format ‘%s’ expects a matching ‘char *’ argument [-Wformat]

Signed-off-by: Nishanth Menon <nm@ti.com>

Add a block device cache to speed up repeated reads of block devices by
various filesystems.

This small amount of cache can dramatically speed up filesystem
operations by skipping repeated reads of common areas of a block
device (typically directory structures).

This has shown to have some benefit on FAT filesystem operations of
loading a kernel and RAM disk, but more dramatic benefits on ext4
filesystems when the kernel and/or RAM disk are spread across
multiple extent header structures as described in commit fc0fc50f.

The cache is implemented through a minimal list (block_cache) maintained
in most-recently-used order and count of the current number of entries
(cache_count). It uses a maximum block count setting to prevent copies
of large block reads and an upper bound on the number of cached areas.

The maximum number of entries in the cache defaults to 32 and the maximum
number of blocks per cache entry has a default of 2, which has shown to
produce the best results on testing of ext4 and FAT filesystems.

The 'blkcache' command (enabled through CONFIG_CMD_BLOCK_CACHE) allows
changing these values and can be used to tune for a particular filesystem
layout.

Signed-off-by: Eric Nelson <eric@nelint.com>

This cannot be NULL since part_get_info() calls this function and requires
it to be non-NULL.

Reported-by: Coverity (CID: 138497)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

This cannot be NULL since part_print() calls this function and requires it
to be non-NULL.

Reported-by: Coverity (CID: 138498)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

One of these is causing a coverity warning. Drop these functions and use the
standard U-Boot ones instead.

Reported-by: Coverity (CID: 138499)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

We have a pretty nice and generic interface to ask for a specific block
device. However, that one is still based around the magic notion that
we know the driver name.

In order to be able to write fully generic disk access code, expose the
currently internal list to other source files so that they can scan through
all available block drivers.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

Rename these functions so that part_ is at the start. This more clearly
identifies these functions as partition functions.

Signed-off-by: Simon Glass <sjg@chromium.org>

To ease conversion to driver model, add helper functions which deal with
calling each block device method. With driver model we can reimplement these
functions with the same arguments.

Use inline functions to avoid increasing code size on some boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

This is a device number, and we want to use 'dev' to mean a driver model
device. Rename the member.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

Rename three partition functions so that they start with part_. This makes
it clear what they relate to.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>

We can use linker lists instead of explicitly declaring each function.
This makes the code shorter by avoiding switch() statements and lots of
header file declarations.

While this does clean up the code it introduces a few code issues with SPL.
SPL never needs to print partition information since this all happens from
commands. SPL mostly doesn't need to obtain information about a partition
either, except in a few cases. Add these cases so that the code will be
dropped from each partition driver when not needed. This avoids code bloat.

I think this is still a win, since it is not a bad thing to be explicit
about which features are used in SPL. But others may like to weigh in.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

In part_amiga.c the name is unsigned but bcpl_strcpy() requires a signed
pointer. Add a cast to fix the warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

Rename this function to blk_get_device_part_str(). This is a better name
because it makes it clear that the function returns a block device and
parses a string.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

The current name is too generic. The function returns a block device based
on a provided string. Rename it to aid searching and make its purpose
clearer. Also add a few comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

The current name is too generic. Add a 'blk_' prefix to aid searching and
make its purpose clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

Adjust the cast to avoid a warning when stdint.h is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>

Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

On bootup the emmc's hw partition is always set to 0 and the partition
table is read from it. When switching to another hw partition the
partition table's id is not updated but instead the old one from
hw partition 0 is used. If there is no partition table on hw partition 0
then the code will terminate and return error even if the desired hw
partition contains a perfectly fine partition table. This fix updates
the partition table struct to correspond to the specified hw partition
before testing if the partition table is valid or not.

Signed-off-by: Erik Tideman <erik.tideman@faltcom.se>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Squash the patch that corrected whitespace in the original into
this one, wrap with HAVE_BLOCK_DEVICE test]
Signed-off-by: Tom Rini <trini@konsulko.com>