- Jan 02, 2017
-
-
These files are blowing up the SPL and should not be required there as the SPL delivers no command console. Because building fails for mx27 and mx31 machines with SPL build, we remove the linker flag for them from the Makefile. Nothing is built for them to be linked in that directory. Cc: sbabic@denx.de v2 Changes: - Remove mx27 and mx31 from Makefile during SPL build as nothing is built for them in that directory. And removing the commands with the libs-y directive lead to linker failures. e.g. "armv5te-ld.bfd: cannot find arch/arm/imx-common/built-in.o: No such file or directory)" Signed-off-by:
Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by:
George McCollister <george.mccollister@gmail.com> Tested-by:
George McCollister <george.mccollister@gmail.com>
-
Commit c94981ef ("udoo_neo: Remove USDHC3 support") removed the SDHC3 support, but missed to remove the entry from the usdhc_cfg structure, so just remove it. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com>
-
- Dec 29, 2016
-
-
Masahiro Yamada authored
This is a user-unconfigurable option that is selected by the drivers that need to overwrite SDHCI IO memory accessors. (BCM2835 SDHCI seems the only driver that needs to do so.) Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Tom Rini <trini@konsulko.com> Reviewed-by:
Jaehoon Chung <jh80.chung@samsung.com>
-
Masahiro Yamada authored
While I moved the options, I also renamed them so that they are all prefixed with MMC_SDHCI_. This commit was created in the following steps. [1] Rename with the following command find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g ' [2] create the Kconfig entries in drivers/mmc/Kconfig [3] Move the options by the following command tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \ MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR [4] Sort drivers/mmc/Makefile for readability Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Tom Rini <trini@konsulko.com> Reviewed-by:
Jaehoon Chung <jh80.chung@samsung.com>
-
Masahiro Yamada authored
Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI. My motivation for the rename is, ultimately, to make all the MMC options prefixed with MMC_ and SDHCI options with MMC_SDHCI_, like Linux. This commit was created as follows: [1] Rename the config option with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g' [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig [3] run "tools/moveconfig.py -y MMC_SDHCI" [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Tom Rini <trini@konsulko.com> Reviewed-by:
Jaehoon Chung <jh80.chung@samsung.com>
-
Masahiro Yamada authored
Currently, CONFIG_MMC is not related to any other options by "depends on" or "select". One of big advantages of using Kconfig is automatic dependency tracking, but the current state is lacking it. As the first step, make the existing MMC driver entries depend on MMC. This commit was created by the following steps: [1] Run the following script: --------------------8<-------------------- rm -f tmp.txt for d in $(find . -path './configs/*_defconfig') do if grep -q -e 'CONFIG_MSM_SDHCI=y' $d || grep -q -e 'CONFIG_ATMEL_SDHCI=y' $d || grep -q -e 'CONFIG_ROCKCHIP_DWMMC=y' $d || grep -q -e 'CONFIG_SH_SDHI=y' $d || grep -q -e 'CONFIG_PIC32_SDHCI=y' $d || grep -q -e 'CONFIG_ZYNQ_SDHCI=y' $d || grep -q -e 'CONFIG_ROCKCHIP_SDHCI=y' $d || grep -q -e 'CONFIG_MMC_UNIPHIER=y' $d || grep -q -e 'CONFIG_SANDBOX_MMC=y' $d then echo CONFIG_MMC=y >> $d echo ${d#./configs/} >> tmp.txt fi done tools/moveconfig.py -y -s -d tmp.txt rm tmp.txt --------------------8<-------------------- [2] surround MMC driver entries with "if MMC" and "endif" Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Tom Rini <trini@konsulko.com> Reviewed-by:
Jaehoon Chung <jh80.chung@samsung.com>
-
Masahiro Yamada authored
Commit 7a777f6d ("mmc: Add generic Kconfig option") created a Kconfig entry for this option without any actual moves, then commit 44c79879 ("sunxi: Use Kconfig CONFIG_MMC") moved instances only for SUNXI. We generally do not like such partial moves. This kind of work is automated by tools/moveconfig.py, so it is pretty easy to complete this move. I am adding "default ARM || PPC || SANDBOX" (suggested by Tom). This shortens the configs and will ease new board porting. This commit was created as follows: [1] Edit Kconfig (remove the "depends on", add the "default", copy the prompt and help message from Linux) [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC' Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Jaehoon Chung <jh80.chung@samsung.com>
-
Masahiro Yamada authored
Generated by "tools/moveconfig -s". This will make config moves easier. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
- Dec 27, 2016
-
-
Peng Fan authored
add MAINTAINERS files Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
Jaehoon Chung authored
Update the maintainer from Przemyslaw and Lukasz to me. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com>
-
Baruch Siach authored
In commit 7044c6bb (net: cosmetic: Clean up DHCP variables and functions) BootpCopyNetParams() was renamed to store_net_params(). Update the reference in comment. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il>
-
Stefan Brüns authored
genext2fs creates revision level 0 filesystems, which are not readable by u-boot due to the initialized group descriptor size field. f798b1dd Reported-by:
Kever Yang <kever.yang@rock-chips.com> Reported-by:
<FrostyBytes@protonmail.com> Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Tested-by:
Kever Yang <kever.yang@rock-chips.com>
-
Jean-Jacques Hiblot authored
With capacities getting bigger, we can see see messages with negative numbers like "Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)". Here the printed LBA is -387938128 when it should have been 3907029168. To fix this, use the right format when displaying the unsigned integers. Signed-off-by:
Jean-Jacques Hiblot <jjhiblot@ti.com> Reported-by:
Yan Liu <yan-liu@ti.com>
-
Ajay Bhargav authored
I am not longer using my old email address "ajay.bhargav@einfochips.com". For U-Boot development email address is now updated to contact@8051projects.net Signed-off-by:
Ajay Bhargav <contact@8051projects.net>
-
Michal Simek authored
This patch is fixing missing fclose() calls in error patch introduced by: "tools: mkimage: Use fstat instead of stat to avoid malicious hacks" (sha1: ebe0f53f) Reported-by: Coverity (CID: 155064, 155065) Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Masahiro Yamada authored
These options are now described in the Kconfig help. We do not want to maintain duplicated documentation. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Tom Rini <trini@konsulko.com>
-
Masahiro Yamada authored
Commit be72591b ("Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig") is misconversion. The original logic in include/configs/uniphier.h was as follows: #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64) #define CONFIG_USE_ARCH_MEMSET #define CONFIG_USE_ARCH_MEMCPY #endif This means those configs were enabled when building U-Boot proper, but disabled when building SPL. Likewise for Tegra. Now "depends on !SPL" prevents any boards with SPL support from reaching these options. This changed the behavior for UniPhier and Tegra SoC family. Please notice these two options only control the U-Boot proper build. As you see arch/arm/Makefile, ARM-specific memset/memcpy are never compiled for SPL. So, __HAVE_ARCH_MEMCPY/MEMSET should not set for SPL. Fixes: be72591b ("Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com>
-
Jaehoon Chung authored
Przemyslaw didn't maintain the PMIC anymore. Update the pmic maintainer from Przeymyslaw to me. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Stefan Brüns authored
Instead of shuffling bits from two adjacent 16 bit words, use one 16 bit word with the appropriate byte offset in the buffer. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de>
-
Stefan Brüns authored
get_fatent_value(...) flushes changed FAT entries to disk when fetching the next FAT blocks, in every other aspect it is identical to get_fatent(...). Provide a stub implementation for flush_dirty_fat_buffer if CONFIG_FAT_WRITE is not set. Calling flush_dirty_fat_buffer during read only operation is fine as it checks if any buffers needs flushing. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by:
Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
-
Stefan Brüns authored
The FAT is read/flushed in segments of 6 (FATBUFBLOCKS) disk sectors. The last segment may be less than 6 sectors, cap the length. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by:
Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
-
Fabio Estevam authored
Fix "Memory" and "initialize" typos in the CMD_MEMORY help text. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Tom Rini <trini@konsulko.com>
-
Philipp Skadorov authored
The u-boot command fatwrite empties FAT clusters from the beginning till the end of the file. Specifically for FAT12 it fails to detect the end of the file and goes beyond the file bounds thus corrupting the file system. Additionally, FAT entry chaining-up into a file is not implemented for FAT12. The users normally workaround this by re-formatting the partition as FAT16/FAT32, like here: https://github.com/FEDEVEL/openrex-uboot-v2015.10/issues/1 The patch fixes the bounds of a file and FAT12 entries chaining into a file, including EOF markup. Signed-off-by:
Philipp Skadorov <philipp.skadorov@savoirfairelinux.com>
-
Jonathan Gray authored
Use the endian macros from u-boot's compiler.h instead of duplicating the definitions. This also avoids a build error on OpenBSD by removing swap64 which collides with a system definition in endian.h pulled in by inttypes.h. Signed-off-by:
Jonathan Gray <jsg@jsg.id.au>
-
Zakharov Vlad authored
Earlier timer driver needed a clock-frequency property in compatible device-tree nodes. Another way is to reference a clock via a phandle. So now timer_pre_probe tries to get clock by reference through device tree. In case it is impossible to get clock device through the reference, clock-frequency property of the timer node is read to provide backward compatibility. Signed-off-by:
Vlad Zakharov <vzakhar@synopsys.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Vignesh R authored
Add support to handle enable-active-high DT property. This property is used to drive the gpio controlling fixed regulator as active high when claiming gpio line. Signed-off-by:
Vignesh R <vigneshr@ti.com> Acked-by:
Simon Glass <sjg@chromium.org>
-
- Dec 26, 2016
-
-
Bin Meng authored
Now that we have added file names from Kconfig in x86 u-boot.dtsi, update binman to avoid using hard-coded names. Signed-off-by:
Bin Meng <bmeng.cn@gmail.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Bin Meng authored
Since we already have a bunch of Kconfig options for CMC/FSP/VGA file names, add these from Kconfig in the corresponding dts nodes. Signed-off-by:
Bin Meng <bmeng.cn@gmail.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Bin Meng authored
With the conversion to use binman to build x86 boards, Intel Galileo board does not build anymore due to missing ucode entry. In fact ucode is not needed for quark-based boards. Signed-off-by:
Bin Meng <bmeng.cn@gmail.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
- Dec 23, 2016
-
-
git://git.denx.de/u-boot-sunxiTom Rini authored
-
git://git.denx.de/u-boot-spiTom Rini authored
-
git://git.denx.de/u-boot-samsungTom Rini authored
-
- Dec 22, 2016
-
-
Jaehoon Chung authored
Enable the DM_PMIC and DM_I2C_GPIO for using max8998 pmic. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Minkyu Kang <mk7.kang@samsung.com>
-
Jaehoon Chung authored
To use driver-model adds the pmic node for max8998. This is used as kerel device-tree in Linux. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Minkyu Kang <mk7.kang@samsung.com>
-
Jaehoon Chung authored
Add the max8998 controller for Driver model. Samsung S5P series are using max8998 pmic controller. In future, it should be supported the regulator framework. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Minkyu Kang <mk7.kang@samsung.com>
-
- Dec 21, 2016
-
-
Michal Simek authored
There is hard dependency on BLK and DM_MMC which is also used by ATMEL and ROCKCHIP. Signed-off-by:
Michal Simek <michal.simek@xilinx.com>
-
Jaehoon Chung authored
Remove the entire spear_sdhci.c file. There is no use case. This is dead codes. Also there is no place to call "spear_sdhci_init()" anywhere. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
Tom Rini <trini@konsulko.com>
-
Jagan Teki authored
armada100_spi.c and related env is zapping becuase of "no DM conversion". Cc: Ajay Bhargav <ajay.bhargav@einfochips.com> Signed-off-by:
Jagan Teki <jagan@openedev.com>
-
Jagan Teki authored
armada100_spi.c, related config options and related codes are zapping becuase of "no DM conversion". Cc: Werner Pfister <Pfister_Werner@intercontrol.de> Signed-off-by:
Jagan Teki <jagan@openedev.com> Reviewed-by:
Tom Rini <trini@konsulko.com>
-
Konstantin Porotchkin authored
Fix the MMU mapping for A8K device family: - Separate A7K and A8K memory mappings - Fix memory regions by including IO mapping for all 3 PCIe interfaces existing on each connected CP110 controller Add A8K memory mapping documentation with all regions configured by Marvell ATF. Change-Id: I9c930569b1853900f5fba2d5db319b092cc7a2a6 Signed-off-by:
Konstantin Porotchkin <kostap@marvell.com> Signed-off-by:
Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
-