Signed-off-by: Bo Shen <voice.shen@atmel.com>

Add the option for USB Ethernet gadget based on atmel usb
device.

Signed-off-by: Bo Shen <voice.shen@atmel.com>

Signed-off-by: Bo Shen <voice.shen@atmel.com>

The SAMA5D4 has the same usb platform data with SAMA5D3 SoC.

Signed-off-by: Bo Shen <voice.shen@atmel.com>

This config is not valid, so drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

As sama5d3 xplained support the PMECC. So add the PMECC header for spl
binary. That make ROM loader can use PMECC to avoid error flips in spl
code in nandflash.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>

add SPL support also for the axm board.

Signed-off-by: Heiko Schocher <hs@denx.de>

- corvus board fix problems with toshiba nand chips
  on the corvus board problems with toshiba chips
  Manufacturer ID: 0x98 Chip ID: 0xdc encounterd.

  Solve this in the following way:
  - set other nand timings
  - enable CONFIG_SYS_NAND_READY_PIN

- correct the MACH_TYPE setting

Signed-off-by: Heiko Schocher <hs@denx.de>

if in SPL mode recovery button is pressed, erase also spi flash
from offset 0 to CONFIG_SYS_NAND_U_BOOT_SIZE on the taurus board.

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

in thumb mode compiler says for example for arch/arm/lib/cache-cp15.c
when enabling CONFIG_SYS_THUMB_BUILD:

{standard input}: Assembler messages:
{standard input}:373: Error: selected processor does not support Thumb mode `mrc p15,0,r4,c1,c0,0'
{standard input}:416: Error: selected processor does not support Thumb mode `mcr p15,0,r3,c2,c0,0'

so, if caches are disabled, do not use this command on arm926ejs.
used on at91 in SPL, to reduce size of SPL.

Signed-off-by: Heiko Schocher <hs@denx.de>

All the 74xx_7xx boards are still non-generic boards:
P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2

Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <yorksun@freescale.com>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Nye Liu <nyet@zumanetworks.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>

Now TQM8xx is the only remaining board family of mpc8xx.
It uses its own linker script, board/tqc/tqm8xx/u-boot.lds.

arch/powerpc/cpu/mpc8xx/u-boot.lds is not used by any boards.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

Since commit 843125da (ppc4xx: remove HH405 board), CONFIG_HH405
is not defined.

Since commit d5263304 (ppc4xx: remove PMC405), CONFIG_PMC405
is not defined.

Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>

Normally buildman runs with 'make -s' meaning that only errors and warnings
appear in the log file. Add a -V option to run make in verbose mode, and
with V=1, causing a full build log to be created.

Signed-off-by: Simon Glass <sjg@chromium.org>

The site at https://www.kernel.org/pub/tools/crosstool/

 is a convenient
repository of toolchains which can be used for U-Boot. Add a feature to
download and install a toolchain for a selected architecture automatically.

It isn't clear how long this site will stay in the current place and
format, but we should be able to rely on bug reports if it changes.

Suggested-by: Marek Vašut <marex@denx.de>
Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

Some archs have need than one alias, so support a list of alises in the
..buildman file.

Signed-off-by: Simon Glass <sjg@chromium.org>

We should create a test setting file when running testes, not use whatever
happens to be on the local machine.

Signed-off-by: Simon Glass <sjg@chromium.org>

Silently ignore this since it is valid to have missing sections.

Signed-off-by: Simon Glass <sjg@chromium.org>

This file is only partially documented. Add some more details.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>

Since we need a few modules which might not be available in a bare-bones
distribution, add a note about that to the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>

In some cases there may be multiple toolchains with the same name in the
path. Provide an option to use the full path in the CROSS_COMPILE
environment variable.

Note: Wolfgang mentioned that this is dangerous since in some cases there
may be other tools on the path that are needed. So this is set up as an
option, not the default. I will need test confirmation (i.e. that this
commit fixes a real problem) before merging it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Steve Rae <srae@broadcom.com>

If:

1. Toolchains A and B have the same filename
2. Toolchain A is in the PATH
3. Toolchain B is given in ~/.buildman and buildman uses it to build

then buildman will add toolchain B to the end of its path but will not
necessarily use it since U-Boot will find toolchain A first in the PATH.

Try to fix this by putting the toolchain first in the path instead of
last.

Signed-off-by: Simon Glass <sjg@chromium.org>

The assumption that the compiler name will always end in gcc is incorrect
for clang and apparently on BSD.

Signed-off-by: Simon Glass <sjg@chromium.org>

Adjust the -b flag to permit a range expression as well as a branch.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

When running tests the output directory is often wiped. This is only safe if
a branch is being built. The output directory may contain other things
besides the buildman test output.

Signed-off-by: Simon Glass <sjg@chromium.org>

When building current source for a single board, buildman puts the output
in <output_dir>/current/current/<board>. Add an option to make it use
<output_dir>/<board> instead. This removes the unnecessary directories
in that case, controlled by the --no-subdirs/-N option.

Suggested-by: Tom Rini <trini@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

Buildman normally obtains the upstream commit by asking git. Provided that
the branch was created with 'git checkout -b <branch> <some_upstream>' then
this normally works.

When there is no upstream, we can try to guess one, by looking up through
the commits until we find a branch. Add a function to try this and print
a warning if buildman ends up relying on it.

Also update the documentation to match.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>

This is not needed since we always do a full (non-incremental) build. Also
it might be dangerous since it will try to delete everything below the
base directory.

Fix this potentially nasty bug.

Signed-off-by: Simon Glass <sjg@chromium.org>

Buildman currently puts current-source builds in a current/current
subdirectory, but there is no need for the extra depth.

Suggested-by: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Simon Glass <sjg@chromium.org>

Add a few tests of the output directory logic.

Signed-off-by: Simon Glass <sjg@chromium.org>

Use phys_addr_t instead of int for addresses.
Addresses can't be < 0.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Trivial fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

It makes sense to specify CONFIG_SYS_CLK_FREQ in "configs/xx_defconfig"
instead of "include/configs/xxx.h" because then header will be reusable
across boards with different CPU clocks.

Also this nice to have an ability for end user to tune this value
himself via "menuconfig".

For now I'm only applying this change to all ARC configs because
otherwise scope of change will be huge.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Tom Rini <trini@ti.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Hans de Goede <hdegoede@redhat.com>
cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>

If CONFIG_SPL_NOR_SUPPORT is defined, spl_nor_load_image() requires
spl_start_uboot(), CONFIG_SYS_OS_BASE, CONFIG_SYS_SPL_ARGS_ADDR,
CONFIG_SYS_FDT_BASE to be defined even if users just want to run
U-Boot, not Linux.  This is inconvenient.

This patch is following the codying style of common/spl/spl_nand.c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Allow booting the OpenRTOS payloads via fitImage image type.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>