- Mar 27, 2008
-
-
Stefan Roese authored
Signed-off-by:
Stefan Roese <sr@denx.de>
-
- Mar 26, 2008
-
-
Anatolij Gustschin authored
Currently U-Boot building in some external directory doesn't work. This patch tries to fix the problem. Signed-off-by:
Anatolij Gustschin <agust@denx.de>
-
Anatolij Gustschin authored
Fix typo in README Signed-off-by:
Anatolij Gustschin <agust@denx.de>
-
Anatolij Gustschin authored
This patch fixes compilation error cmd_usb.c: In function 'do_usb': cmd_usb.c:552: error: void value not ignored as it ought to be Signed-off-by:
Anatolij Gustschin <agust@denx.de>
-
Timur Tabi authored
Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, but fsl_i2c.c ignores it and uses conservative value when programming the I2C bus speed. Signed-off-by:
Timur Tabi <timur@freescale.com> Acked-by:
Andy Fleming <afleming@freescale.com>
-
Wolfgang Denk authored
Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
Dave Liu authored
Add the Freescale on-chip SATA controller driver to u-boot, The SATA controller is used on the 837x and 8315 targets, The driver can be used to load kernel, fs and dtb. The features list: - 1.5/3 Gbps link speed - LBA48, LBA28 support - DMA and FPDMA support - Two ports support Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Dave Liu authored
Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Dave Liu authored
Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Dave Liu authored
Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Dave Liu authored
add simple libata support in u-boot Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Dave Liu authored
original ata_piix driver is using IDE framework, not real SATA framework. For now, the ata_piix driver is only used by x86 sc520_cdp board. This patch makes the ata_piix driver use the new SATA framework, so - remove the duplicated command stuff - remove the CONFIG_CMD_IDE define in the sc520_cdp.h - add the CONFIG_CMD_SATA define to sc520_cdp.h Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Dave Liu authored
- add the SATA framework - add the SATA command line Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Dave Liu authored
move the sata.h from include/ to drivers/block/ata_piix.h Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Dave Liu authored
move the cmd_sata.c from common/ to drivers/ata_piix.c, the cmd_sata.c have some part of ata_piix controller drivers. consolidate the driver to have better framework. Signed-off-by:
Dave Liu <daveliu@freescale.com>
-
Markus Klotzbuecher authored
f6b44e0e that will cause usb_stor_info to only print only information on one storage device, but not for multiple. Signed-off-by:
Markus Klotzbuecher <mk@denx.de>
-
Anatolij Gustschin authored
This patch fixes compilation error cmd_usb.c: In function 'do_usb': cmd_usb.c:552: error: void value not ignored as it ought to be Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
Markus Klotzbuecher <mk@denx.de>
-
Kumar Gala authored
Provide a board_lmb_reserve helper function to ensure we reserve the page of memory we are using for the boot page translation code. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kumar Gala authored
The following changes are needed to be inline with ePAPR v0.81: * r4, r5 and now always set to 0 on boot release * r7 is used to pass the size of the initial map area (IMA) * EPAPR_MAGIC value changed for book-e processors * changes in the spin table layout * spin table supports a 64-bit physical release address Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Jon Loeliger authored
Each file that can be built here now follows some CONFIG_ option so that they are appropriately built or not, as needed. And CONFIG_ defines were added to various board config files to make sure that happens. The other board/freescale/*/Makefiles no longer need to reach up and over into ../common to build their individually needed files any more. Boards that are CDS specific were renamed with cds_ prefix. Signed-off-by:
Jon Loeliger <jdl@freescale.com>
-
Kumar Gala authored
ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
James Yang authored
Signed-off-by:
James Yang <James.Yang@freescale.com> Signed-off-by:
Jon Loeliger <jdl@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
James Yang authored
get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were called. However, get_sys_info() recalculates extraneous information when called each time. Have get_ddr_freq() and get_bus_freq() return memoized values from global_data instead. Signed-off-by:
James Yang <James.Yang@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
James Yang authored
Show the DDR memory data rate in addition to the memory clock frequency. For DDR/DDR2 memories the memory data rate is 2x the memory clock. Signed-off-by:
James Yang <James.Yang@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
James Yang authored
Speed up get_tbclk() by referencing pre-computed bus clock frequency value from global data instead of sys_info_t. Fix rounding of result to nearest; previously it was rounding upwards. Signed-off-by:
James Yang <James.Yang@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Andy Fleming authored
FSL has taken to using SVR[16:23] as an SOC sub-version field. This is used to distinguish certain variants within an SOC family. To account for this, we add the SVR_SOC_VER() macro, and update the SVR_* constants to reflect the larger value. We also add SVR numbers for all of the current variants. Finally, to make things neater, rather than use an enormous switch statement to print out the CPU type, we create and array of SVR/name pairs (using a macro), and print out the CPU name that matches the SVR SOC version. Signed-off-by:
Andy Fleming <afleming@freescale.com>
-
Andy Fleming authored
Signed-off-by:
Andy Fleming <afleming@freescale.com>
-
Kumar Gala authored
Added the cpu command that provides a generic mechanism to get status, reset, and release secondary cores in multicore processors. Added support for using the ePAPR defined spin-table mechanism on 85xx. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Andy Fleming <afleming@freescale.com>
-
Kumar Gala authored
Added the cpu command that provides a generic mechanism to get status, reset, and release secondary cores in multicore processors. Added support for using the ePAPR defined spin-table mechanism on 85xx. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kumar Gala authored
When we go to 36-bit physical addresses we need to keep the concept of the physical CCSRBAR address seperate from the virtual one. For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Wolfgang Denk authored
Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
Joakim Tjernlund authored
The default settings for RTC DS1337 keeps the OSC output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to turn it off. Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
-
Wolfgang Denk authored
Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
Wolfgang Denk authored
-
Wolfgang Denk authored
Signed-off-by:
Wolfgang Denk <wd@denx.de>
-
git://www.denx.de/git/u-boot-testingBartlomiej Sieka authored
Conflicts: common/cmd_bootm.c cpu/mpc8xx/cpu.c Signed-off-by:
Bartlomiej Sieka <tur@semihalf.com>
-
Aras Vaichas authored
This patch changes the "usb storage" command to return success if it finds a USB storage device, otherwise it returns error. Signed-off-by:
Markus Klotzbuecher <mk@denx.de>