- Dec 29, 2019
-
-
Tomislav Denis authored
All Sensors DLH is series of low voltage digital pressure sensors. Additionally to pressure value sensors deliver a temperature value. Sensors can be accessed over I2C and SPI, this driver supports only I2C access. Signed-off-by:
Tomislav Denis <tomislav.denis@avl.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lars-Peter Clausen authored
Make sure that the industrialio-buffer-dmaengine has proper license information so it can be build as a module and loaded without tainting the kernel. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Linus Walleij authored
This uses the C99 explicit .member assignment for the variant data in struct bma180_part_info. This makes it easier to understand and add new variants. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
This brings up the VDD and VDDIO regulators using the regulator framework. Platforms that do not use regulators will provide stubs or dummy regulators. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by:
-
Linus Walleij authored
Having a shorthand "dev" instead of &client->dev everywhere makes the code easier to read (more compact). Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by:
-
Lorenzo Bianconi authored
Enabled i2c master controller support for LSM6DSM sensor. Enable ext_sensor0 for lsm6dsm. This series has been tested using LIS2MDL as slave device connected to the i2c controller of the LSM6DSM Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Rename st_lsm6dsx_shub_read_reg routine in st_lsm6dsx_shub_read_output since it is used to read from sensorhub channel0 output register Signed-off-by:
-
Lorenzo Bianconi authored
Check if the sensor hub output register is located in the primary or in the secondary memory page. This is a preliminary patch to support i2c master controller on lsm6dsm devices Signed-off-by:
-
Lorenzo Bianconi authored
Check if the pull up register is located in the primary or in the secondary memory page. This is a preliminary patch to support i2c master controller on lsm6dsm devices Signed-off-by:
-
Lorenzo Bianconi authored
Check if the master enable register is located in the primary or in the secondary memory page. This is a preliminary patch to support i2c master controller on lsm6dsm devices Signed-off-by:
-
Lorenzo Bianconi authored
Export max number of slave devices supported by the i2c master controller in st_lsm6dsx_shub_settings data structure. This is a preliminary patch to support i2c master controller on lsm6dsm sensors Signed-off-by:
-
Chen Zhou authored
Fixes coccicheck warning: ./drivers/iio/light/lm3533-als.c:745:2-3: Unneeded semicolon Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Matt Ranostay authored
Since the orginal scope of the driver was to only support the pH product from Atlas it has evolved to other sensors. Rename the file, driver name, and regmap to atlas-sensor which reflects this, although keep CONFIG_ATLAS_PH_SENSOR to not cause regressions with current configurations. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Andy Shevchenko authored
Kernel documentation script complains that some of the function parameters are not described: .../common/st_sensors/st_sensors_trigger.c:29: warning: Function parameter or member 'indio_dev' not described in 'st_sensors_new_samples_available' .../common/st_sensors/st_sensors_trigger.c:29: warning: Function parameter or member 'sdata' not described in 'st_sensors_new_samples_available' Describe function parameters where it's appropriate. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark default_press_pdata with __maybe_unused to calm a compiler down: In file included from drivers/iio/pressure/st_pressure_spi.c:18: drivers/iio/pressure/st_pressure.h:40:46: warning: ‘default_press_pdata’ defined but not used [-Wunused-const-variable=] 40 | static const struct st_sensors_platform_data default_press_pdata = { | ^~~~~~~~~~~~~~~~~~~ ... Signed-off-by: -
Andy Shevchenko authored
Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark default_accel_pdata with __maybe_unused to calm a compiler down: In file included from drivers/iio/accel/st_accel_i2c.c:19: drivers/iio/accel/st_accel.h:67:46: warning: ‘default_accel_pdata’ defined but not used [-Wunused-const-variable=] 67 | static const struct st_sensors_platform_data default_accel_pdata = { | ^~~~~~~~~~~~~~~~~~~ ... Signed-off-by: -
Andy Shevchenko authored
Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark gyro_pdata with __maybe_unused to calm a compiler down: In file included from drivers/iio/gyro/st_gyro_i2c.c:18: drivers/iio/gyro/st_gyro.h:31:46: warning: ‘gyro_pdata’ defined but not used [-Wunused-const-variable=] 31 | static const struct st_sensors_platform_data gyro_pdata = { | ^~~~~~~~~~ ... Signed-off-by: -
Andy Shevchenko authored
ACPI_PTR() takes care of the argument in case of !CONFIG_ACPI. Remove unnecessary #else branch. Signed-off-by:
-
Andy Shevchenko authored
ACPI_PTR() takes care of the argument in case of !CONFIG_ACPI. Remove unnecessary #else branch. Signed-off-by:
-
Andy Shevchenko authored
There is no evidence that the driver supports or needs ACPI APIs. Signed-off-by:
-
Andy Shevchenko authored
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by:
-
Andy Shevchenko authored
There is no need to have OF guard against ID table. Drop it for good. Signed-off-by:
-
Andy Shevchenko authored
Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark predefined constants with __maybe_unused to calm a compiler down: In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c:17: .../st_lsm6dsx/st_lsm6dsx.h:399:28: warning: ‘st_lsm6dsx_available_scan_masks’ defined but not used [-Wunused-const-variable=] 399 | static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .../st_lsm6dsx/st_lsm6dsx.h:392:36: warning: ‘st_lsm6dsx_event’ defined but not used [-Wunused-const-variable=] 392 | static const struct iio_event_spec st_lsm6dsx_event = { | ^~~~~~~~~~~~~~~~ ... Signed-off-by: -
Daniel Junho authored
The ad7928 is software compatible with the ad7923. The ad7908 and ad7918 are the 8 and 10-bit versions of the ad7928. Signed-off-by:
Daniel Junho <djunho@gmail.com> Reviewed-by:
-
Daniel Junho authored
Accomplish device tree compatibility to driver AD7923 by adding of_device_id table and making a subsequent call to MODULE_DEVICE_TABLE. Signed-off-by:
-
Daniel Junho authored
Fix checkpatch warning: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' +static int ad7923_scan_direct(struct ad7923_state *st, unsigned ch) Signed-off-by:
-
Daniel Junho authored
Removes the unused define AD7923_CHANNEL_x from the code. Signed-off-by:
-
Dan Robertson authored
Add support for the VDD and VDDIO regulators using the regulator framework. Signed-off-by:
Dan Robertson <dan@dlrobertson.com> Reviewed-by:
-
Dan Robertson authored
Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer. The driver supports reading from the acceleration and temperature registers. The driver also supports reading and configuring the output data rate, oversampling ratio, and scale. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
-
Dan Robertson authored
Add devicetree binding for the Bosch BMA400 3-axes ultra-low power accelerometer sensor. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- Dec 15, 2019
-
-
Rodrigo Carvalho authored
This patch add device tree binding documentation for ADIS16240. Signed-off-by:
Rodrigo Carvalho <rodrigorsdc@gmail.com> Reviewed-by:
-
Rodrigo Carvalho authored
According to the datasheet, this driver supports only SPI mode 3, so we should enforce it on probe function. Signed-off-by:
-
Uwe Kleine-König authored
This chip is similar to the LTC2497 ADC, it just uses SPI instead of I2C and so has a slightly different protocol. Only the actual hardware access is different. The spi protocol is different enough to not be able to map the differences via a regmap. Also generalize the entry in MAINTAINER to cover the newly introduced file. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
This allows to share most of this driver for the ltc2496 driver added in the next commit that is an SPI variant of the ltc2497. Initially I named the generic part ltc249x, but wild card names are frowned upon, so the generic part is called ltc2497-core even though it's not obvious that this is then to be reused for the ltc2496 driver. Signed-off-by:
-
Uwe Kleine-König authored
The ADC only requires the standard stuff for spi devices and a reference voltage. Signed-off-by:
-
Andy Shevchenko authored
Make use of device property API in this driver so that both OF based system and ACPI based system can use this driver. Signed-off-by:
-
Andy Shevchenko authored
Platform data is a legacy interface to supply device properties to the driver. In this case we even don't have in-kernel users for it. Just remove it for good. Signed-off-by:
-
Christophe JAILLET authored
Fix a typo: s/get get/to get/ Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Lorenzo Bianconi authored
Move some register definitions to hts221_avg_list, hts221_avg_list and hts221_channels since they are used only there and simplify driver code Signed-off-by:
-
Fabrice Gasnier authored
Enable overrun interrupt on STM32 ADC. In case data register hasn't been read (by CPU or DMA), overrun condition is detected when there's new conversion data available. Stop grabbing data and log an error message. Use a threaded irq to avoid printing the error message from hard irq context. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
