Remove driver model CONFIGs from the board config headers and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

Remove driver model CONFIGs from the board config header and use Kconfig
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add Kconfig settings for these two options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Add a file to control driver model test features.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

The SPL support cannot be enabled yet, but we can add the Kconfig
options in preparation for this.

Signed-off-by: Simon Glass <sjg@chromium.org>

Expand the help messages for each driver. Add missing Kconfig for I2C,
SPI flash and thermal.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Add a suitable Kconfig for this directory.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Make the driver model I2C API available always, even if driver model
is not enabled. This allows for a 'soft' switch-over, where drivers can
use the new structures in code which is compiled but not yet used. This
makes migration easier in some cases.

Fix up the existing drivers which define their own 'struct i2c_msg'.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

As with i2c_read() and i2c_write(), add a dm_ prefix to the driver model
versions of these functions to avoid conflicts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

Drop the old checksum functions in favour of the new ones.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

This also displays the "Board:" line in the bootup text with the
generic board support code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

These additional nodes need to be provided to get U-Boot to boot correctly
on the Canyonlands / Glacier board:

- chosen path to the console-uart
- reg-shift set to 0 in the uart device nodes

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

This is necessary, as ppc4xx has the reset vector located at the end
of the U-Boot image. This needs to be flashed to the end of the NOR
flash. Adding the dtb to the main U-Boot image will break booting
on ppc4xx. This patch now embeds the dtb in the U-Boot image instead.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

This permits us to use linux/linkage.h on PowerPC machines.

Signed-off-by: Simon Glass <sjg@chromium.org>

Adjust Kconfig to default to driver model for glacier, canyonlands and
arches.

Signed-off-by: Simon Glass <sjg@chromium.org>

This uses the ns16550 driver but sets up the clock at run-time. It does
not seem to be available in the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>

This comes from the device tree or a call to get_uart_clock().

Signed-off-by: Simon Glass <sjg@chromium.org>

Enable CONFIG_OF_CONTROL so that U-Boot on these three boards uses a device
tree for its configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>

Define an _end symbol indicating the end of u-boot.bin. Also add some dummy
words into the link script to ensure that u-boot.bin will always extend
that far. There may be a better way of doing this.

Signed-off-by: Simon Glass <sjg@chromium.org>

This is required at present for device tree control. The ppc4xx does support
GPIOs but does not seem to have a proper driver. So this file is empty.

Signed-off-by: Simon Glass <sjg@chromium.org>

Call this function to set up our early memory.

Signed-off-by: Simon Glass <sjg@chromium.org>

The canyonlands.h config file works with canyonlands, glacier and arches
boards. Bring in the device tree files for these from Linux 3.17.

Signed-off-by: Simon Glass <sjg@chromium.org>

Switch to generic board so that this board will not be broken/removed.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add a new ramboot config for glacier so that it is possible to test U-Boot
loaded over Ethernet instead of using JTAG.

Signed-off-by: Simon Glass <sjg@chromium.org>

Move these options to Kconfig and remove them from the CONFIG files.

Signed-off-by: Simon Glass <sjg@chromium.org>

Many CONFIG options have an unnecessary value of 1. CONFIG_440 is set in
the various board config files. Also simplify the CONFIG_440 check in
config.mk

Signed-off-by: Simon Glass <sjg@chromium.org>

Enable this in the Kconfig so that PowerPC boards can use device tree to
configure U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present on some architectures we set up the following before calling
board_init_f():

   - global_data
   - stack
   - early malloc memory

Adding the code to support early malloc and global data setup to every
arch's assembler start-up is a pain. Also this code is not actually
architecture-specific. We can use common code for all architectures and
with a bit of care we can write this code in C.

Add a new function to deal with this. It should be called after memory
is available, with a pointer to the top of the area that should be used
before relocation. The function will set things up and return the lowest
memory address that it allocated/used. That can then be set as the top
of the stack.

Note that on some archs this function will use the stack, so the stack
pointer should be set to same value as is pased to board_init_f_mem().
A margin of 128 bytes will be left for this stack, so that it is not
overwritten. This means that 64 bytes is wasted by this early call.
This is not strictly necessary on several more modern archs, so we could
remove this at the cost of some arch-dependent code.

With this function there is no-longer any need for the assembler code to
zero global_data or set up the early malloc pointers.

Signed-off-by: Simon Glass <sjg@chromium.org>

All callers of malloc should already do error checking, and may even be able
to continue without the alloc succeeding.

Moreover, common/malloc_simple.c is the only user of .rodata.str1.1 in
common/built-in.o when building the SPL, triggering this gcc bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303



Causing .rodata to grow with e.g. 0xc21 bytes, nullifying all benefits of
using malloc_simple in the first place.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>

If no device is connected to I2C bus, the i2c probe command
can take a lot of time for probe each address. This commit
reduces the busy timeout to 10ms for standard and high speed
modes. This doesn't break the transmission an also allow for
properly probe the devices.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>

Changes v3:
- new commit, after split the next one
Tested-by: Simon Glass <sjg@chromium.org>

Pass bank rather than bank->base to _get_gpio_direction().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Simon Glass <sjg@chromium.org>

Use dev_get_priv() rather than dev_get_platdata() to get correct address of
private data.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Simon Glass <sjg@chromium.org>

Segfaults can occur when a mandatory argument is not provided to
"demo hello" and "demo status".  Eg:

   => demo hello
   Segmentation fault (core dumped)

Add a check to ensure all required arguments are provided.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Simon Glass <sjg@chromium.org>

Discovered while experimenting with signature checking on vexpress
which doesn't typically use DM.
Acked-by: Simon Glass <sjg@chromium.org>

The recent changes to config_distro_bootcmd.h require CONFIG_CMD_PART to be
defined, as the default bootcmd not uses the "part" command.

This fixes sunxi boards not booting with v2015.04-rc1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add linux/compiler-gcc5/h from the kernel sources at:

commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
Author: Steven Noonan <steven@uplinklabs.net>
Date:   Sat Oct 25 15:09:42 2014 -0700

    compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles

Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Conflicts:
	include/splash.h

Signed-off-by: Tom Rini <trini@ti.com>